diff options
Diffstat (limited to 'arch')
318 files changed, 7309 insertions, 4392 deletions
diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig index 296bc03d1cf..3bfef0934c9 100644 --- a/arch/arm/Kconfig +++ b/arch/arm/Kconfig @@ -324,7 +324,7 @@ menu "Kernel Features" config SMP bool "Symmetric Multi-Processing (EXPERIMENTAL)" - depends on EXPERIMENTAL && BROKEN #&& n + depends on EXPERIMENTAL && REALVIEW_MPCORE help This enables support for systems with more than one CPU. If you have a system with only one CPU, like most personal computers, say N. If @@ -356,6 +356,16 @@ config HOTPLUG_CPU Say Y here to experiment with turning CPUs off and on. CPUs can be controlled through /sys/devices/system/cpu. +config LOCAL_TIMERS + bool "Use local timer interrupts" + depends on SMP && n + default y + help + Enable support for local timers on SMP platforms, rather then the + legacy IPI broadcast method. Local timers allows the system + accounting to be spread across the timer interval, preventing a + "thundering herd" at every timer tick. + config PREEMPT bool "Preemptible Kernel (EXPERIMENTAL)" depends on EXPERIMENTAL @@ -585,7 +595,7 @@ config FPE_NWFPE config FPE_NWFPE_XP bool "Support extended precision" - depends on FPE_NWFPE && !CPU_BIG_ENDIAN + depends on FPE_NWFPE help Say Y to include 80-bit support in the kernel floating-point emulator. Otherwise, only 32 and 64-bit support is compiled in. diff --git a/arch/arm/boot/compressed/misc.c b/arch/arm/boot/compressed/misc.c index 50f13eec6cd..5ab94584bae 100644 --- a/arch/arm/boot/compressed/misc.c +++ b/arch/arm/boot/compressed/misc.c @@ -283,8 +283,14 @@ void flush_window(void) putstr("."); } +#ifndef arch_error +#define arch_error(x) +#endif + static void error(char *x) { + arch_error(x); + putstr("\n\n"); putstr(x); putstr("\n\n -- System halted"); diff --git a/arch/arm/common/scoop.c b/arch/arm/common/scoop.c index bb4eff61441..c7fdf390cef 100644 --- a/arch/arm/common/scoop.c +++ b/arch/arm/common/scoop.c @@ -19,12 +19,6 @@ #define SCOOP_REG(d,adr) (*(volatile unsigned short*)(d +(adr))) -/* PCMCIA to Scoop linkage structures for pxa2xx_sharpsl.c - There is no easy way to link multiple scoop devices into one - single entity for the pxa2xx_pcmcia device */ -int scoop_num; -struct scoop_pcmcia_dev *scoop_devs; - struct scoop_dev { void *base; spinlock_t scoop_lock; diff --git a/arch/arm/kernel/armksyms.c b/arch/arm/kernel/armksyms.c index 7b17a87a331..7a3261f0bf7 100644 --- a/arch/arm/kernel/armksyms.c +++ b/arch/arm/kernel/armksyms.c @@ -9,6 +9,7 @@ */ #include <linux/module.h> #include <linux/string.h> +#include <linux/cryptohash.h> #include <linux/delay.h> #include <linux/in6.h> #include <linux/syscalls.h> @@ -126,6 +127,9 @@ EXPORT_SYMBOL(__put_user_2); EXPORT_SYMBOL(__put_user_4); EXPORT_SYMBOL(__put_user_8); + /* crypto hash */ +EXPORT_SYMBOL(sha_transform); + /* gcc lib functions */ EXPORT_SYMBOL(__ashldi3); EXPORT_SYMBOL(__ashrdi3); diff --git a/arch/arm/kernel/entry-armv.S b/arch/arm/kernel/entry-armv.S index a511ec5b11a..d9fb819bf7c 100644 --- a/arch/arm/kernel/entry-armv.S +++ b/arch/arm/kernel/entry-armv.S @@ -47,6 +47,13 @@ movne r0, sp adrne lr, 1b bne do_IPI + +#ifdef CONFIG_LOCAL_TIMERS + test_for_ltirq r0, r6, r5, lr + movne r0, sp + adrne lr, 1b + bne do_local_timer +#endif #endif .endm diff --git a/arch/arm/kernel/irq.c b/arch/arm/kernel/irq.c index 9def4404e1f..d7099dbbb87 100644 --- a/arch/arm/kernel/irq.c +++ b/arch/arm/kernel/irq.c @@ -264,6 +264,7 @@ unlock: #endif #ifdef CONFIG_SMP show_ipi_list(p); + show_local_irqs(p); #endif seq_printf(p, "Err: %10lu\n", irq_err_count); } @@ -995,7 +996,7 @@ void __init init_irq_proc(void) struct proc_dir_entry *dir; int irq; - dir = proc_mkdir("irq", 0); + dir = proc_mkdir("irq", NULL); if (!dir) return; diff --git a/arch/arm/kernel/ptrace.c b/arch/arm/kernel/ptrace.c index 9bd8609a292..9a340e790da 100644 --- a/arch/arm/kernel/ptrace.c +++ b/arch/arm/kernel/ptrace.c @@ -648,7 +648,7 @@ static int ptrace_setwmmxregs(struct task_struct *tsk, void __user *ufp) #endif -static int do_ptrace(int request, struct task_struct *child, long addr, long data) +long arch_ptrace(struct task_struct *child, long request, long addr, long data) { unsigned long tmp; int ret; @@ -782,53 +782,6 @@ static int do_ptrace(int request, struct task_struct *child, long addr, long dat return ret; } -asmlinkage long sys_ptrace(long request, long pid, long addr, long data) -{ - struct task_struct *child; - int ret; - - lock_kernel(); - ret = -EPERM; - if (request == PTRACE_TRACEME) { - /* are we already being traced? */ - if (current->ptrace & PT_PTRACED) - goto out; - ret = security_ptrace(current->parent, current); - if (ret) - goto out; - /* set the ptrace bit in the process flags. */ - current->ptrace |= PT_PTRACED; - ret = 0; - goto out; - } - ret = -ESRCH; - read_lock(&tasklist_lock); - child = find_task_by_pid(pid); - if (child) - get_task_struct(child); - read_unlock(&tasklist_lock); - if (!child) - goto out; - - ret = -EPERM; - if (pid == 1) /* you may not mess with init */ - goto out_tsk; - - if (request == PTRACE_ATTACH) { - ret = ptrace_attach(child); - goto out_tsk; - } - ret = ptrace_check_attach(child, request == PTRACE_KILL); - if (ret == 0) - ret = do_ptrace(request, child, addr, data); - -out_tsk: - put_task_struct(child); -out: - unlock_kernel(); - return ret; -} - asmlinkage void syscall_trace(int why, struct pt_regs *regs) { unsigned long ip; diff --git a/arch/arm/kernel/smp.c b/arch/arm/kernel/smp.c index edb5a406922..77e2e9ca89f 100644 --- a/arch/arm/kernel/smp.c +++ b/arch/arm/kernel/smp.c @@ -142,7 +142,7 @@ int __cpuinit __cpu_up(unsigned int cpu) ret = -EIO; } - secondary_data.stack = 0; + secondary_data.stack = NULL; secondary_data.pgdir = 0; *pmd_offset(pgd, PHYS_OFFSET) = __pmd(0); @@ -185,6 +185,11 @@ int __cpuexit __cpu_disable(void) migrate_irqs(); /* + * Stop the local timer for this CPU. + */ + local_timer_stop(cpu); + + /* * Flush user cache and TLB mappings, and then remove this CPU * from the vm mask set of all processes. */ @@ -290,6 +295,11 @@ asmlinkage void __cpuinit secondary_start_kernel(void) cpu_set(cpu, cpu_online_map); /* + * Setup local timer for this CPU. + */ + local_timer_setup(cpu); + + /* * OK, it's off to the idle thread for us */ cpu_idle(); @@ -359,8 +369,8 @@ static void send_ipi_message(cpumask_t callmap, enum ipi_msg_type msg) * You must not call this function with disabled interrupts, from a * hardware interrupt handler, nor from a bottom half handler. */ -int smp_call_function_on_cpu(void (*func)(void *info), void *info, int retry, - int wait, cpumask_t callmap) +static int smp_call_function_on_cpu(void (*func)(void *info), void *info, + int retry, int wait, cpumask_t callmap) { struct smp_call_struct data; unsigned long timeout; @@ -454,6 +464,18 @@ void show_ipi_list(struct seq_file *p) seq_putc(p, '\n'); } +void show_local_irqs(struct seq_file *p) +{ + unsigned int cpu; + + seq_printf(p, "LOC: "); + + for_each_present_cpu(cpu) + seq_printf(p, "%10u ", irq_stat[cpu].local_timer_irqs); + + seq_putc(p, '\n'); +} + static void ipi_timer(struct pt_regs *regs) { int user = user_mode(regs); @@ -464,6 +486,18 @@ static void ipi_timer(struct pt_regs *regs) irq_exit(); } +#ifdef CONFIG_LOCAL_TIMERS +asmlinkage void do_local_timer(struct pt_regs *regs) +{ + int cpu = smp_processor_id(); + + if (local_timer_ack()) { + irq_stat[cpu].local_timer_irqs++; + ipi_timer(regs); + } +} +#endif + /* * ipi_call_function - handle IPI from smp_call_function() * @@ -515,7 +549,7 @@ static void ipi_cpu_stop(unsigned int cpu) * * Bit 0 - Inter-processor function call */ -void do_IPI(struct pt_regs *regs) +asmlinkage void do_IPI(struct pt_regs *regs) { unsigned int cpu = smp_processor_id(); struct ipi_data *ipi = &per_cpu(ipi_data, cpu); diff --git a/arch/arm/mach-aaec2000/clock.c b/arch/arm/mach-aaec2000/clock.c index 99e019169dd..0340ddc4824 100644 --- a/arch/arm/mach-aaec2000/clock.c +++ b/arch/arm/mach-aaec2000/clock.c @@ -14,6 +14,7 @@ #include <linux/list.h> #include <linux/errno.h> #include <linux/err.h> +#include <linux/string.h> #include <asm/semaphore.h> #include <asm/hardware/clock.h> diff --git a/arch/arm/mach-epxa10db/mm.c b/arch/arm/mach-epxa10db/mm.c index e8832d0910e..cfd0d2182d4 100644 --- a/arch/arm/mach-epxa10db/mm.c +++ b/arch/arm/mach-epxa10db/mm.c @@ -25,6 +25,7 @@ #include <asm/hardware.h> #include <asm/io.h> #include <asm/sizes.h> +#include <asm/page.h> #include <asm/mach/map.h> diff --git a/arch/arm/mach-integrator/impd1.c b/arch/arm/mach-integrator/impd1.c index a1b153d1626..a4bafee77a0 100644 --- a/arch/arm/mach-integrator/impd1.c +++ b/arch/arm/mach-integrator/impd1.c @@ -420,8 +420,7 @@ static int impd1_probe(struct lm_device *dev) free_impd1: if (impd1 && impd1->base) iounmap(impd1->base); - if (impd1) - kfree(impd1); + kfree(impd1); release_lm: release_mem_region(dev->resource.start, SZ_4K); return ret; diff --git a/arch/arm/mach-ixp2000/core.c b/arch/arm/mach-ixp2000/core.c index df140962bb0..6851abaf552 100644 --- a/arch/arm/mach-ixp2000/core.c +++ b/arch/arm/mach-ixp2000/core.c @@ -84,63 +84,54 @@ static struct map_desc ixp2000_io_desc[] __initdata = { .virtual = IXP2000_CAP_VIRT_BASE, .pfn = __phys_to_pfn(IXP2000_CAP_PHYS_BASE), .length = IXP2000_CAP_SIZE, - .type = MT_DEVICE + .type = MT_IXP2000_DEVICE, }, { .virtual = IXP2000_INTCTL_VIRT_BASE, .pfn = __phys_to_pfn(IXP2000_INTCTL_PHYS_BASE), .length = IXP2000_INTCTL_SIZE, - .type = MT_DEVICE + .type = MT_IXP2000_DEVICE, }, { .virtual = IXP2000_PCI_CREG_VIRT_BASE, .pfn = __phys_to_pfn(IXP2000_PCI_CREG_PHYS_BASE), .length = IXP2000_PCI_CREG_SIZE, - .type = MT_DEVICE + .type = MT_IXP2000_DEVICE, }, { .virtual = IXP2000_PCI_CSR_VIRT_BASE, .pfn = __phys_to_pfn(IXP2000_PCI_CSR_PHYS_BASE), .length = IXP2000_PCI_CSR_SIZE, - .type = MT_DEVICE + .type = MT_IXP2000_DEVICE, }, { .virtual = IXP2000_MSF_VIRT_BASE, .pfn = __phys_to_pfn(IXP2000_MSF_PHYS_BASE), .length = IXP2000_MSF_SIZE, - .type = MT_DEVICE + .type = MT_IXP2000_DEVICE, }, { .virtual = IXP2000_PCI_IO_VIRT_BASE, .pfn = __phys_to_pfn(IXP2000_PCI_IO_PHYS_BASE), .length = IXP2000_PCI_IO_SIZE, - .type = MT_DEVICE + .type = MT_IXP2000_DEVICE, }, { .virtual = IXP2000_PCI_CFG0_VIRT_BASE, .pfn = __phys_to_pfn(IXP2000_PCI_CFG0_PHYS_BASE), .length = IXP2000_PCI_CFG0_SIZE, - .type = MT_DEVICE + .type = MT_IXP2000_DEVICE, }, { .virtual = IXP2000_PCI_CFG1_VIRT_BASE, .pfn = __phys_to_pfn(IXP2000_PCI_CFG1_PHYS_BASE), .length = IXP2000_PCI_CFG1_SIZE, - .type = MT_DEVICE + .type = MT_IXP2000_DEVICE, } }; void __init ixp2000_map_io(void) { - extern unsigned int processor_id; - /* - * On IXP2400 CPUs we need to use MT_IXP2000_DEVICE for - * tweaking the PMDs so XCB=101. On IXP2800s we use the normal - * PMD flags. + * On IXP2400 CPUs we need to use MT_IXP2000_DEVICE so that + * XCB=101 (to avoid triggering erratum #66), and given that + * this mode speeds up I/O accesses and we have write buffer + * flushes in the right places anyway, it doesn't hurt to use + * XCB=101 for all IXP2000s. */ - if ((processor_id & 0xfffffff0) == 0x69054190) { - int i; - - printk(KERN_INFO "Enabling IXP2400 erratum #66 workaround\n"); - - for(i=0;i<ARRAY_SIZE(ixp2000_io_desc);i++) - ixp2000_io_desc[i].type = MT_IXP2000_DEVICE; - } - iotable_init(ixp2000_io_desc, ARRAY_SIZE(ixp2000_io_desc)); /* Set slowport to 8-bit mode. */ diff --git a/arch/arm/mach-pxa/corgi.c b/arch/arm/mach-pxa/corgi.c index eb5f6d744a4..100fb31b515 100644 --- a/arch/arm/mach-pxa/corgi.c +++ b/arch/arm/mach-pxa/corgi.c @@ -62,6 +62,37 @@ static struct scoop_config corgi_scoop_setup = { .io_out = CORGI_SCOOP_IO_OUT, }; +struct platform_device corgiscoop_device = { + .name = "sharp-scoop", + .id = -1, + .dev = { + .platform_data = &corgi_scoop_setup, + }, + .num_resources = ARRAY_SIZE(corgi_scoop_resources), + .resource = corgi_scoop_resources, +}; + +static void corgi_pcmcia_init(void) +{ + /* Setup default state of GPIO outputs + before we enable them as outputs. */ + GPSR(GPIO48_nPOE) = GPIO_bit(GPIO48_nPOE) | + GPIO_bit(GPIO49_nPWE) | GPIO_bit(GPIO50_nPIOR) | + GPIO_bit(GPIO51_nPIOW) | GPIO_bit(GPIO52_nPCE_1) | + GPIO_bit(GPIO53_nPCE_2); + + pxa_gpio_mode(GPIO48_nPOE_MD); + pxa_gpio_mode(GPIO49_nPWE_MD); + pxa_gpio_mode(GPIO50_nPIOR_MD); + pxa_gpio_mode(GPIO51_nPIOW_MD); + pxa_gpio_mode(GPIO55_nPREG_MD); + pxa_gpio_mode(GPIO56_nPWAIT_MD); + pxa_gpio_mode(GPIO57_nIOIS16_MD); + pxa_gpio_mode(GPIO52_nPCE_1_MD); + pxa_gpio_mode(GPIO53_nPCE_2_MD); + pxa_gpio_mode(GPIO54_pSKTSEL_MD); +} + static struct scoop_pcmcia_dev corgi_pcmcia_scoop[] = { { .dev = &corgiscoop_device.dev, @@ -71,16 +102,14 @@ static struct scoop_pcmcia_dev corgi_pcmcia_scoop[] = { }, }; -struct platform_device corgiscoop_device = { - .name = "sharp-scoop", - .id = -1, - .dev = { - .platform_data = &corgi_scoop_setup, - }, - .num_resources = ARRAY_SIZE(corgi_scoop_resources), - .resource = corgi_scoop_resources, +static struct scoop_pcmcia_config corgi_pcmcia_config = { + .devs = &corgi_pcmcia_scoop[0], + .num_devs = 1, + .pcmcia_init = corgi_pcmcia_init, }; +EXPORT_SYMBOL(corgiscoop_device); + /* * Corgi SSP Device @@ -294,8 +323,7 @@ static void __init corgi_init(void) pxa_set_mci_info(&corgi_mci_platform_data); pxa_set_ficp_info(&corgi_ficp_platform_data); - scoop_num = 1; - scoop_devs = &corgi_pcmcia_scoop[0]; + platform_scoop_config = &corgi_pcmcia_config; platform_add_devices(devices, ARRAY_SIZE(devices)); } diff --git a/arch/arm/mach-pxa/corgi_lcd.c b/arch/arm/mach-pxa/corgi_lcd.c index 54162ba9541..698eb06545c 100644 --- a/arch/arm/mach-pxa/corgi_lcd.c +++ b/arch/arm/mach-pxa/corgi_lcd.c @@ -19,6 +19,7 @@ #include <linux/kernel.h> #include <linux/platform_device.h> #include <linux/module.h> +#include <linux/string.h> #include <asm/arch/akita.h> #include <asm/arch/corgi.h> #include <asm/arch/hardware.h> diff --git a/arch/arm/mach-pxa/poodle.c b/arch/arm/mach-pxa/poodle.c index ad6a13f95a6..eef3de26ad3 100644 --- a/arch/arm/mach-pxa/poodle.c +++ b/arch/arm/mach-pxa/poodle.c @@ -65,6 +65,27 @@ struct platform_device poodle_scoop_device = { .resource = poodle_scoop_resources, }; +static void poodle_pcmcia_init(void) +{ + /* Setup default state of GPIO outputs + before we enable them as outputs. */ + GPSR(GPIO48_nPOE) = GPIO_bit(GPIO48_nPOE) | + GPIO_bit(GPIO49_nPWE) | GPIO_bit(GPIO50_nPIOR) | + GPIO_bit(GPIO51_nPIOW) | GPIO_bit(GPIO52_nPCE_1) | + GPIO_bit(GPIO53_nPCE_2); + + pxa_gpio_mode(GPIO48_nPOE_MD); + pxa_gpio_mode(GPIO49_nPWE_MD); + pxa_gpio_mode(GPIO50_nPIOR_MD); + pxa_gpio_mode(GPIO51_nPIOW_MD); + pxa_gpio_mode(GPIO55_nPREG_MD); + pxa_gpio_mode(GPIO56_nPWAIT_MD); + pxa_gpio_mode(GPIO57_nIOIS16_MD); + pxa_gpio_mode(GPIO52_nPCE_1_MD); + pxa_gpio_mode(GPIO53_nPCE_2_MD); + pxa_gpio_mode(GPIO54_pSKTSEL_MD); +} + static struct scoop_pcmcia_dev poodle_pcmcia_scoop[] = { { .dev = &poodle_scoop_device.dev, @@ -74,6 +95,14 @@ static struct scoop_pcmcia_dev poodle_pcmcia_scoop[] = { }, }; +static struct scoop_pcmcia_config poodle_pcmcia_config = { + .devs = &poodle_pcmcia_scoop[0], + .num_devs = 1, + .pcmcia_init = poodle_pcmcia_init, +}; + +EXPORT_SYMBOL(poodle_scoop_device); + /* LoCoMo device */ static struct resource locomo_resources[] = { @@ -268,8 +297,7 @@ static void __init poodle_init(void) pxa_set_mci_info(&poodle_mci_platform_data); pxa_set_ficp_info(&poodle_ficp_platform_data); - scoop_num = 1; - scoop_devs = &poodle_pcmcia_scoop[0]; + platform_scoop_config = &poodle_pcmcia_config; ret = platform_add_devices(devices, ARRAY_SIZE(devices)); if (ret) { diff --git a/arch/arm/mach-pxa/spitz.c b/arch/arm/mach-pxa/spitz.c index 6c6878cd220..4e9a699ee42 100644 --- a/arch/arm/mach-pxa/spitz.c +++ b/arch/arm/mach-pxa/spitz.c @@ -104,6 +104,66 @@ struct platform_device spitzscoop2_device = { .resource = spitz_scoop2_resources, }; +#define SPITZ_PWR_SD 0x01 +#define SPITZ_PWR_CF 0x02 + +/* Power control is shared with between one of the CF slots and SD */ +static void spitz_card_pwr_ctrl(int device, unsigned short new_cpr) +{ + unsigned short cpr = read_scoop_reg(&spitzscoop_device.dev, SCOOP_CPR); + + if (new_cpr & 0x0007) { + set_scoop_gpio(&spitzscoop_device.dev, SPITZ_SCP_CF_POWER); + if (!(cpr & 0x0002) && !(cpr & 0x0004)) + mdelay(5); + if (device == SPITZ_PWR_CF) + cpr |= 0x0002; + if (device == SPITZ_PWR_SD) + cpr |= 0x0004; + write_scoop_reg(&spitzscoop_device.dev, SCOOP_CPR, cpr | new_cpr); + } else { + if (device == SPITZ_PWR_CF) + cpr &= ~0x0002; + if (device == SPITZ_PWR_SD) + cpr &= ~0x0004; + write_scoop_reg(&spitzscoop_device.dev, SCOOP_CPR, cpr | new_cpr); + if (!(cpr & 0x0002) && !(cpr & 0x0004)) { + mdelay(1); + reset_scoop_gpio(&spitzscoop_device.dev, SPITZ_SCP_CF_POWER); + } + } +} + +static void spitz_pcmcia_init(void) +{ + /* Setup default state of GPIO outputs + before we enable them as outputs. */ + GPSR(GPIO48_nPOE) = GPIO_bit(GPIO48_nPOE) | + GPIO_bit(GPIO49_nPWE) | GPIO_bit(GPIO50_nPIOR) | + GPIO_bit(GPIO51_nPIOW) | GPIO_bit(GPIO54_nPCE_2); + GPSR(GPIO85_nPCE_1) = GPIO_bit(GPIO85_nPCE_1); + + pxa_gpio_mode(GPIO48_nPOE_MD); + pxa_gpio_mode(GPIO49_nPWE_MD); + pxa_gpio_mode(GPIO50_nPIOR_MD); + pxa_gpio_mode(GPIO51_nPIOW_MD); + pxa_gpio_mode(GPIO55_nPREG_MD); + pxa_gpio_mode(GPIO56_nPWAIT_MD); + pxa_gpio_mode(GPIO57_nIOIS16_MD); + pxa_gpio_mode(GPIO85_nPCE_1_MD); + pxa_gpio_mode(GPIO54_nPCE_2_MD); + pxa_gpio_mode(GPIO104_pSKTSEL_MD); +} + +static void spitz_pcmcia_pwr(struct device *scoop, unsigned short cpr, int nr) +{ + /* Only need to override behaviour for slot 0 */ + if (nr == 0) + spitz_card_pwr_ctrl(SPITZ_PWR_CF, cpr); + else + write_scoop_reg(scoop, SCOOP_CPR, cpr); +} + static struct scoop_pcmcia_dev spitz_pcmcia_scoop[] = { { .dev = &spitzscoop_device.dev, @@ -117,6 +177,16 @@ static struct scoop_pcmcia_dev spitz_pcmcia_scoop[] = { }, }; +static struct scoop_pcmcia_config spitz_pcmcia_config = { + .devs = &spitz_pcmcia_scoop[0], + .num_devs = 2, + .pcmcia_init = spitz_pcmcia_init, + .power_ctrl = spitz_pcmcia_pwr, +}; + +EXPORT_SYMBOL(spitzscoop_device); +EXPORT_SYMBOL(spitzscoop2_device); + /* * Spitz SSP Device @@ -235,27 +305,14 @@ static int spitz_mci_init(struct device *dev, irqreturn_t (*spitz_detect_int)(in return 0; } -/* Power control is shared with one of the CF slots so we have a mess */ static void spitz_mci_setpower(struct device *dev, unsigned int vdd) { struct pxamci_platform_data* p_d = dev->platform_data; - unsigned short cpr = read_scoop_reg(&spitzscoop_device.dev, SCOOP_CPR); - - if (( 1 << vdd) & p_d->ocr_mask) { - /* printk(KERN_DEBUG "%s: on\n", __FUNCTION__); */ - set_scoop_gpio(&spitzscoop_device.dev, SPITZ_SCP_CF_POWER); - mdelay(2); - write_scoop_reg(&spitzscoop_device.dev, SCOOP_CPR, cpr | 0x04); - } else { - /* printk(KERN_DEBUG "%s: off\n", __FUNCTION__); */ - write_scoop_reg(&spitzscoop_device.dev, SCOOP_CPR, cpr & ~0x04); - - if (!(cpr | 0x02)) { - mdelay(1); - reset_scoop_gpio(&spitzscoop_device.dev, SPITZ_SCP_CF_POWER); - } - } + if (( 1 << vdd) & p_d->ocr_mask) + spitz_card_pwr_ctrl(SPITZ_PWR_SD, 0x0004); + else + spitz_card_pwr_ctrl(SPITZ_PWR_SD, 0x0000); } static int spitz_mci_get_ro(struct device *dev) @@ -351,8 +408,8 @@ static void __init common_init(void) static void __init spitz_init(void) { - scoop_num = 2; - scoop_devs = &spitz_pcmcia_scoop[0]; + platform_scoop_config = &spitz_pcmcia_config; + spitz_bl_machinfo.set_bl_intensity = spitz_bl_set_intensity; common_init(); diff --git a/arch/arm/mach-pxa/time.c b/arch/arm/mach-pxa/time.c index 7dad3f1465e..b9b2057349e 100644 --- a/arch/arm/mach-pxa/time.c +++ b/arch/arm/mach-pxa/time.c @@ -132,11 +132,13 @@ static void __init pxa_timer_init(void) tv.tv_sec = pxa_get_rtc_time(); do_settimeofday(&tv); - OSMR0 = 0; /* set initial match at 0 */ + OIER = 0; /* disable any timer interrupts */ + OSCR = LATCH*2; /* push OSCR out of the way */ + OSMR0 = LATCH; /* set initial match */ OSSR = 0xf; /* clear status on all timers */ setup_irq(IRQ_OST0, &pxa_timer_irq); - OIER |= OIER_E0; /* enable match on timer 0 to cause interrupts */ - OSCR = 0; /* initialize free-running timer, force first match */ + OIER = OIER_E0; /* enable match on timer 0 to cause interrupts */ + OSCR = 0; /* initialize free-running timer */ } #ifdef CONFIG_NO_IDLE_HZ diff --git a/arch/arm/mach-pxa/tosa.c b/arch/arm/mach-pxa/tosa.c index 400609f8b6a..c312054dfb8 100644 --- a/arch/arm/mach-pxa/tosa.c +++ b/arch/arm/mach-pxa/tosa.c @@ -98,6 +98,9 @@ struct platform_device tosascoop_jc_device = { .resource = tosa_scoop_jc_resources, }; +/* + * PCMCIA + */ static struct scoop_pcmcia_dev tosa_pcmcia_scoop[] = { { .dev = &tosascoop_device.dev, @@ -111,16 +114,155 @@ static struct scoop_pcmcia_dev tosa_pcmcia_scoop[] = { }, }; +static void tosa_pcmcia_init(void) +{ + /* Setup default state of GPIO outputs + before we enable them as outputs. */ + GPSR(GPIO48_nPOE) = GPIO_bit(GPIO48_nPOE) | + GPIO_bit(GPIO49_nPWE) | GPIO_bit(GPIO50_nPIOR) | + GPIO_bit(GPIO51_nPIOW) | GPIO_bit(GPIO52_nPCE_1) | + GPIO_bit(GPIO53_nPCE_2); + + pxa_gpio_mode(GPIO48_nPOE_MD); + pxa_gpio_mode(GPIO49_nPWE_MD); + pxa_gpio_mode(GPIO50_nPIOR_MD); + pxa_gpio_mode(GPIO51_nPIOW_MD); + pxa_gpio_mode(GPIO55_nPREG_MD); + pxa_gpio_mode(GPIO56_nPWAIT_MD); + pxa_gpio_mode(GPIO57_nIOIS16_MD); + pxa_gpio_mode(GPIO52_nPCE_1_MD); + pxa_gpio_mode(GPIO53_nPCE_2_MD); + pxa_gpio_mode(GPIO54_pSKTSEL_MD); +} + +static struct scoop_pcmcia_config tosa_pcmcia_config = { + .devs = &tosa_pcmcia_scoop[0], + .num_devs = 2, + .pcmcia_init = tosa_pcmcia_init, +}; + +/* + * USB Device Controller + */ +static void tosa_udc_command(int cmd) +{ + switch(cmd) { + case PXA2XX_UDC_CMD_CONNECT: + set_scoop_gpio(&tosascoop_jc_device.dev,TOSA_SCOOP_JC_USB_PULLUP); + break; + case PXA2XX_UDC_CMD_DISCONNECT: + reset_scoop_gpio(&tosascoop_jc_device.dev,TOSA_SCOOP_JC_USB_PULLUP); + break; + } +} + +static int tosa_udc_is_connected(void) +{ + return ((GPLR(TOSA_GPIO_USB_IN) & GPIO_bit(TOSA_GPIO_USB_IN)) == 0); +} + + +static struct pxa2xx_udc_mach_info udc_info __initdata = { + .udc_command = tosa_udc_command, + .udc_is_connected = tosa_udc_is_connected, +}; + +/* + * MMC/SD Device + */ +static struct pxamci_platform_data tosa_mci_platform_data; + +static int tosa_mci_init(struct device *dev, irqreturn_t (*tosa_detect_int)(int, void *, struct pt_regs *), void *data) +{ + int err; + + /* setup GPIO for PXA25x MMC controller */ + pxa_gpio_mode(GPIO6_MMCCLK_MD); + pxa_gpio_mode(GPIO8_MMCCS0_MD); + pxa_gpio_mode(TOSA_GPIO_nSD_DETECT | GPIO_IN); + + tosa_mci_platform_data.detect_delay = msecs_to_jiffies(250); + + err = request_irq(TOSA_IRQ_GPIO_nSD_DETECT, tosa_detect_int, SA_INTERRUPT, + "MMC/SD card detect", data); + if (err) { + printk(KERN_ERR "tosa_mci_init: MMC/SD: can't request MMC card detect IRQ\n"); + return -1; + } + + set_irq_type(TOSA_IRQ_GPIO_nSD_DETECT, IRQT_BOTHEDGE); + + return 0; +} + +static void tosa_mci_setpower(struct device *dev, unsigned int vdd) +{ + struct pxamci_platform_data* p_d = dev->platform_data; + + if (( 1 << vdd) & p_d->ocr_mask) { + set_scoop_gpio(&tosascoop_device.dev,TOSA_SCOOP_PWR_ON); + } else { + reset_scoop_gpio(&tosascoop_device.dev,TOSA_SCOOP_PWR_ON); + } +} + +static int tosa_mci_get_ro(struct device *dev) +{ + return (read_scoop_reg(&tosascoop_device.dev, SCOOP_GPWR)&TOSA_SCOOP_SD_WP); +} + +static void tosa_mci_exit(struct device *dev, void *data) +{ + free_irq(TOSA_IRQ_GPIO_nSD_DETECT, data); +} + +static struct pxamci_platform_data tosa_mci_platform_data = { + .ocr_mask = MMC_VDD_32_33|MMC_VDD_33_34, + .init = tosa_mci_init, + .get_ro = tosa_mci_get_ro, + .setpower = tosa_mci_setpower, + .exit = tosa_mci_exit, +}; + +/* + * Irda + */ +static void tosa_irda_transceiver_mode(struct device *dev, int mode) +{ + if (mode & IR_OFF) { + reset_scoop_gpio(&tosascoop_device.dev,TOSA_SCOOP_IR_POWERDWN); + pxa_gpio_mode(GPIO47_STTXD|GPIO_DFLT_LOW); + pxa_gpio_mode(GPIO47_STTXD|GPIO_OUT); + } else { + pxa_gpio_mode(GPIO47_STTXD_MD); + set_scoop_gpio(&tosascoop_device.dev,TOSA_SCOOP_IR_POWERDWN); + } +} + +static struct pxaficp_platform_data tosa_ficp_platform_data = { + .transceiver_cap = IR_SIRMODE | IR_OFF, + .transceiver_mode = tosa_irda_transceiver_mode, +}; + +/* + * Tosa Keyboard + */ +static struct platform_device tosakbd_device = { + .name = "tosa-keyboard", + .id = -1, +}; static struct platform_device *devices[] __initdata = { &tosascoop_device, &tosascoop_jc_device, + &tosakbd_device, }; static void __init tosa_init(void) { pxa_gpio_mode(TOSA_GPIO_ON_RESET | GPIO_IN); pxa_gpio_mode(TOSA_GPIO_TC6393_INT | GPIO_IN); + pxa_gpio_mode(TOSA_GPIO_USB_IN | GPIO_IN); /* setup sleep mode values */ PWER = 0x00000002; @@ -131,13 +273,15 @@ static void __init tosa_init(void) PGSR2 = 0x00014000; PCFR |= PCFR_OPDE; - // enable batt_fault + /* enable batt_fault */ PMCR = 0x01; - platform_add_devices(devices, ARRAY_SIZE(devices)); + pxa_set_mci_info(&tosa_mci_platform_data); + pxa_set_udc_info(&udc_info); + pxa_set_ficp_info(&tosa_ficp_platform_data); + platform_scoop_config = &tosa_pcmcia_config; - scoop_num = 2; - scoop_devs = &tosa_pcmcia_scoop[0]; + platform_add_devices(devices, ARRAY_SIZE(devices)); } static void __init fixup_tosa(struct machine_desc *desc, diff --git a/arch/arm/mach-realview/Kconfig b/arch/arm/mach-realview/Kconfig index 4b63dc9eabf..129976866d4 100644 --- a/arch/arm/mach-realview/Kconfig +++ b/arch/arm/mach-realview/Kconfig @@ -8,4 +8,13 @@ config MACH_REALVIEW_EB help Include support for the ARM(R) RealView Emulation Baseboard platform. +config REALVIEW_MPCORE + bool "Support MPcore tile" + depends on MACH_REALVIEW_EB + help + Enable support for the MPCore tile on the Realview platform. + Since there are device address and interrupt differences, a + kernel built with this option enabled is not compatible with + other tiles. + endmenu diff --git a/arch/arm/mach-realview/Makefile b/arch/arm/mach-realview/Makefile index 8d37ea1605f..011a85c1062 100644 --- a/arch/arm/mach-realview/Makefile +++ b/arch/arm/mach-realview/Makefile @@ -4,3 +4,4 @@ obj-y := core.o clock.o obj-$(CONFIG_MACH_REALVIEW_EB) += realview_eb.o +obj-$(CONFIG_SMP) += platsmp.o headsmp.o diff --git a/arch/arm/mach-realview/core.c b/arch/arm/mach-realview/core.c index 482eb512ebe..4ea60d8b6e3 100644 --- a/arch/arm/mach-realview/core.c +++ b/arch/arm/mach-realview/core.c @@ -550,6 +550,11 @@ static irqreturn_t realview_timer_interrupt(int irq, void *dev_id, struct pt_reg timer_tick(regs); +#ifdef CONFIG_SMP + smp_send_timer(); + update_process_times(user_mode(regs)); +#endif + write_sequnlock(&xtime_lock); return IRQ_HANDLED; diff --git a/arch/arm/mach-realview/core.h b/arch/arm/mach-realview/core.h index 575599db74d..d83e8bad203 100644 --- a/arch/arm/mach-realview/core.h +++ b/arch/arm/mach-realview/core.h @@ -23,6 +23,7 @@ #define __ASM_ARCH_REALVIEW_H #include <asm/hardware/amba.h> +#include <asm/leds.h> #include <asm/io.h> #define __io_address(n) __io(IO_ADDRESS(n)) diff --git a/arch/arm/mach-realview/headsmp.S b/arch/arm/mach-realview/headsmp.S new file mode 100644 index 00000000000..4075473cf68 --- /dev/null +++ b/arch/arm/mach-realview/headsmp.S @@ -0,0 +1,39 @@ +/* + * linux/arch/arm/mach-realview/headsmp.S + * + * Copyright (c) 2003 ARM Limited + * All Rights Reserved + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ +#include <linux/linkage.h> +#include <linux/init.h> + + __INIT + +/* + * Realview specific entry point for secondary CPUs. This provides + * a "holding pen" into which all secondary cores are held until we're + * ready for them to initialise. + */ +ENTRY(realview_secondary_startup) + mrc p15, 0, r0, c0, c0, 5 + and r0, r0, #15 + adr r4, 1f + ldmia r4, {r5, r6} + sub r4, r4, r5 + add r6, r6, r4 +pen: ldr r7, [r6] + cmp r7, r0 + bne pen + + /* + * we've been released from the holding pen: secondary_stack + * should now contain the SVC stack for this core + */ + b secondary_startup + +1: .long . + .long pen_release diff --git a/arch/arm/mach-realview/platsmp.c b/arch/arm/mach-realview/platsmp.c new file mode 100644 index 00000000000..09b35f62247 --- /dev/null +++ b/arch/arm/mach-realview/platsmp.c @@ -0,0 +1,195 @@ +/* + * linux/arch/arm/mach-realview/platsmp.c + * + * Copyright (C) 2002 ARM Ltd. + * All Rights Reserved + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ +#include <linux/init.h> +#include <linux/errno.h> +#include <linux/delay.h> +#include <linux/device.h> +#include <linux/smp.h> + +#include <asm/cacheflush.h> +#include <asm/hardware/arm_scu.h> +#include <asm/hardware.h> + +#include "core.h" + +extern void realview_secondary_startup(void); + +/* + * control for which core is the next to come out of the secondary + * boot "holding pen" + */ +volatile int __cpuinitdata pen_release = -1; + +static unsigned int __init get_core_count(void) +{ + unsigned int ncores; + + ncores = __raw_readl(__io_address(REALVIEW_MPCORE_SCU_BASE) + SCU_CONFIG); + + return (ncores & 0x03) + 1; +} + +static DEFINE_SPINLOCK(boot_lock); + +void __cpuinit platform_secondary_init(unsigned int cpu) +{ + /* + * the primary core may have used a "cross call" soft interrupt + * to get this processor out of WFI in the BootMonitor - make + * sure that we are no longer being sent this soft interrupt + */ + smp_cross_call_done(cpumask_of_cpu(cpu)); + + /* + * if any interrupts are already enabled for the primary + * core (e.g. timer irq), then they will not have been enabled + * for us: do so + */ + gic_cpu_init(__io_address(REALVIEW_GIC_CPU_BASE)); + + /* + * let the primary processor know we're out of the + * pen, then head off into the C entry point + */ + pen_release = -1; + + /* + * Synchronise with the boot thread. + */ + spin_lock(&boot_lock); + spin_unlock(&boot_lock); +} + +int __cpuinit boot_secondary(unsigned int cpu, struct task_struct *idle) +{ + unsigned long timeout; + + /* + * set synchronisation state between this boot processor + * and the secondary one + */ + spin_lock(&boot_lock); + + /* + * The secondary processor is waiting to be released from + * the holding pen - release it, then wait for it to flag + * that it has been released by resetting pen_release. + * + * Note that "pen_release" is the hardware CPU ID, whereas + * "cpu" is Linux's internal ID. + */ + pen_release = cpu; + flush_cache_all(); + + /* + * XXX + * + * This is a later addition to the booting protocol: the + * bootMonitor now puts secondary cores into WFI, so + * poke_milo() no longer gets the cores moving; we need + * to send a soft interrupt to wake the secondary core. + * Use smp_cross_call() for this, since there's little + * point duplicating the code here + */ + smp_cross_call(cpumask_of_cpu(cpu)); + + timeout = jiffies + (1 * HZ); + while (time_before(jiffies, timeout)) { + if (pen_release == -1) + break; + + udelay(10); + } + + /* + * now the secondary core is starting up let it run its + * calibrations, then wait for it to finish + */ + spin_unlock(&boot_lock); + + return pen_release != -1 ? -ENOSYS : 0; +} + +static void __init poke_milo(void) +{ + extern void secondary_startup(void); + + /* nobody is to be released from the pen yet */ + pen_release = -1; + + /* + * write the address of secondary startup into the system-wide + * flags register, then clear the bottom two bits, which is what + * BootMonitor is waiting for + */ +#if 1 +#define REALVIEW_SYS_FLAGSS_OFFSET 0x30 + __raw_writel(virt_to_phys(realview_secondary_startup), + __io_address(REALVIEW_SYS_BASE) + + REALVIEW_SYS_FLAGSS_OFFSET); +#define REALVIEW_SYS_FLAGSC_OFFSET 0x34 + __raw_writel(3, + __io_address(REALVIEW_SYS_BASE) + + REALVIEW_SYS_FLAGSC_OFFSET); +#endif + + mb(); +} + +void __init smp_prepare_cpus(unsigned int max_cpus) +{ + unsigned int ncores = get_core_count(); + unsigned int cpu = smp_processor_id(); + int i; + + /* sanity check */ + if (ncores == 0) { + printk(KERN_ERR + "Realview: strange CM count of 0? Default to 1\n"); + + ncores = 1; + } + + if (ncores > NR_CPUS) { + printk(KERN_WARNING + "Realview: no. of cores (%d) greater than configured " + "maximum of %d - clipping\n", + ncores, NR_CPUS); + ncores = NR_CPUS; + } + + smp_store_cpu_info(cpu); + + /* + * are we trying to boot more cores than exist? + */ + if (max_cpus > ncores) + max_cpus = ncores; + + /* + * Initialise the possible/present maps. + * cpu_possible_map describes the set of CPUs which may be present + * cpu_present_map describes the set of CPUs populated + */ + for (i = 0; i < max_cpus; i++) { + cpu_set(i, cpu_possible_map); + cpu_set(i, cpu_present_map); + } + + /* + * Do we need any more CPUs? If so, then let them know where + * to start. Note that, on modern versions of MILO, the "poke" + * doesn't actually do anything until each individual core is + * sent a soft interrupt to get it out of WFI + */ + if (max_cpus > 1) + poke_milo(); +} diff --git a/arch/arm/mach-realview/realview_eb.c b/arch/arm/mach-realview/realview_eb.c index 267bb07e39b..7dc32503fdf 100644 --- a/arch/arm/mach-realview/realview_eb.c +++ b/arch/arm/mach-realview/realview_eb.c @@ -136,6 +136,11 @@ static struct amba_device *amba_devs[] __initdata = { static void __init gic_init_irq(void) { +#ifdef CONFIG_REALVIEW_MPCORE + writel(0x0000a05f, __io_address(REALVIEW_SYS_LOCK)); + writel(0x008003c0, __io_address(REALVIEW_SYS_BASE) + 0xd8); + writel(0x00000000, __io_address(REALVIEW_SYS_LOCK)); +#endif gic_dist_init(__io_address(REALVIEW_GIC_DIST_BASE)); gic_cpu_init(__io_address(REALVIEW_GIC_CPU_BASE)); } diff --git a/arch/arm/mach-s3c2410/Kconfig b/arch/arm/mach-s3c2410/Kconfig index c796bcdd615..0b9d7ca49ec 100644 --- a/arch/arm/mach-s3c2410/Kconfig +++ b/arch/arm/mach-s3c2410/Kconfig @@ -121,6 +121,14 @@ config S3C2410_BOOT_WATCHDOG system resets depends on the value of PCLK. The timeout on an 200MHz s3c2410 should be about 30 seconds. +config S3C2410_BOOT_ERROR_RESET + bool "S3C2410 Reboot on decompression error" + depends on ARCH_S3C2410 + help + Say y here to use the watchdog to reset the system if the + kernel decompressor detects an error during decompression. + + comment "S3C2410 Setup" config S3C2410_DMA diff --git a/arch/arm/mach-s3c2410/mach-bast.c b/arch/arm/mach-s3c2410/mach-bast.c index 0b71c896bbd..1be2567a748 100644 --- a/arch/arm/mach-s3c2410/mach-bast.c +++ b/arch/arm/mach-s3c2410/mach-bast.c @@ -89,32 +89,63 @@ /* macros to modify the physical addresses for io space */ -#define PA_CS2(item) ((item) + S3C2410_CS2) -#define PA_CS3(item) ((item) + S3C2410_CS3) -#define PA_CS4(item) ((item) + S3C2410_CS4) -#define PA_CS5(item) ((item) + S3C2410_CS5) +#define PA_CS2(item) (__phys_to_pfn((item) + S3C2410_CS2)) +#define PA_CS3(item) (__phys_to_pfn((item) + S3C2410_CS3)) +#define PA_CS4(item) (__phys_to_pfn((item) + S3C2410_CS4)) +#define PA_CS5(item) (__phys_to_pfn((item) + S3C2410_CS5)) static struct map_desc bast_iodesc[] __initdata = { /* ISA IO areas */ - - { (u32)S3C24XX_VA_ISA_BYTE, PA_CS2(BAST_PA_ISAIO), SZ_16M, MT_DEVICE }, - { (u32)S3C24XX_VA_ISA_WORD, PA_CS3(BAST_PA_ISAIO), SZ_16M, MT_DEVICE }, - - /* we could possibly compress the next set down into a set of smaller tables - * pagetables, but that would mean using an L2 section, and it still means - * we cannot actually feed the same register to an LDR due to 16K spacing - */ - + { + .virtual = (u32)S3C24XX_VA_ISA_BYTE, + .pfn = PA_CS2(BAST_PA_ISAIO), + .length = SZ_16M, + .type = MT_DEVICE, + }, { + .virtual = (u32)S3C24XX_VA_ISA_WORD, + .pfn = PA_CS3(BAST_PA_ISAIO), + .length = SZ_16M, + .type = MT_DEVICE, + }, /* bast CPLD control registers, and external interrupt controls */ - { (u32)BAST_VA_CTRL1, BAST_PA_CTRL1, SZ_1M, MT_DEVICE }, - { (u32)BAST_VA_CTRL2, BAST_PA_CTRL2, SZ_1M, MT_DEVICE }, - { (u32)BAST_VA_CTRL3, BAST_PA_CTRL3, SZ_1M, MT_DEVICE }, - { (u32)BAST_VA_CTRL4, BAST_PA_CTRL4, SZ_1M, MT_DEVICE }, - + { + .virtual = (u32)BAST_VA_CTRL1, + .pfn = __phys_to_pfn(BAST_PA_CTRL1), + .length = SZ_1M, + .type = MT_DEVICE, + }, { + .virtual = (u32)BAST_VA_CTRL2, + .pfn = __phys_to_pfn(BAST_PA_CTRL2), + .length = SZ_1M, + .type = MT_DEVICE, + }, { + .virtual = (u32)BAST_VA_CTRL3, + .pfn = __phys_to_pfn(BAST_PA_CTRL3), + .length = SZ_1M, + .type = MT_DEVICE, + }, { + .virtual = (u32)BAST_VA_CTRL4, + .pfn = __phys_to_pfn(BAST_PA_CTRL4), + .length = SZ_1M, + .type = MT_DEVICE, + }, /* PC104 IRQ mux */ - { (u32)BAST_VA_PC104_IRQREQ, BAST_PA_PC104_IRQREQ, SZ_1M, MT_DEVICE }, - { (u32)BAST_VA_PC104_IRQRAW, BAST_PA_PC104_IRQRAW, SZ_1M, MT_DEVICE }, - { (u32)BAST_VA_PC104_IRQMASK, BAST_PA_PC104_IRQMASK, SZ_1M, MT_DEVICE }, + { + .virtual = (u32)BAST_VA_PC104_IRQREQ, + .pfn = __phys_to_pfn(BAST_PA_PC104_IRQREQ), + .length = SZ_1M, + .type = MT_DEVICE, + }, { + .virtual = (u32)BAST_VA_PC104_IRQRAW, + .pfn = __phys_to_pfn(BAST_PA_PC104_IRQRAW), + .length = SZ_1M, + .type = MT_DEVICE, + }, { + .virtual = (u32)BAST_VA_PC104_IRQMASK, + .pfn = __phys_to_pfn(BAST_PA_PC104_IRQMASK), + .length = SZ_1M, + .type = MT_DEVICE, + }, /* peripheral space... one for each of fast/slow/byte/16bit */ /* note, ide is only decoded in word space, even though some registers diff --git a/arch/arm/mach-s3c2410/mach-vr1000.c b/arch/arm/mach-s3c2410/mach-vr1000.c index 46b259673c1..ae7e099bf6c 100644 --- a/arch/arm/mach-s3c2410/mach-vr1000.c +++ b/arch/arm/mach-s3c2410/mach-vr1000.c @@ -74,27 +74,47 @@ /* macros to modify the physical addresses for io space */ -#define PA_CS2(item) ((item) + S3C2410_CS2) -#define PA_CS3(item) ((item) + S3C2410_CS3) -#define PA_CS4(item) ((item) + S3C2410_CS4) -#define PA_CS5(item) ((item) + S3C2410_CS5) +#define PA_CS2(item) (__phys_to_pfn((item) + S3C2410_CS2)) +#define PA_CS3(item) (__phys_to_pfn((item) + S3C2410_CS3)) +#define PA_CS4(item) (__phys_to_pfn((item) + S3C2410_CS4)) +#define PA_CS5(item) (__phys_to_pfn((item) + S3C2410_CS5)) static struct map_desc vr1000_iodesc[] __initdata = { /* ISA IO areas */ - - { (u32)S3C24XX_VA_ISA_BYTE, PA_CS2(BAST_PA_ISAIO), SZ_16M, MT_DEVICE }, - { (u32)S3C24XX_VA_ISA_WORD, PA_CS3(BAST_PA_ISAIO), SZ_16M, MT_DEVICE }, - - /* we could possibly compress the next set down into a set of smaller tables - * pagetables, but that would mean using an L2 section, and it still means - * we cannot actually feed the same register to an LDR due to 16K spacing - */ - - /* bast CPLD control registers, and external interrupt controls */ - { (u32)VR1000_VA_CTRL1, VR1000_PA_CTRL1, SZ_1M, MT_DEVICE }, - { (u32)VR1000_VA_CTRL2, VR1000_PA_CTRL2, SZ_1M, MT_DEVICE }, - { (u32)VR1000_VA_CTRL3, VR1000_PA_CTRL3, SZ_1M, MT_DEVICE }, - { (u32)VR1000_VA_CTRL4, VR1000_PA_CTRL4, SZ_1M, MT_DEVICE }, + { + .virtual = (u32)S3C24XX_VA_ISA_BYTE, + .pfn = PA_CS2(BAST_PA_ISAIO), + .length = SZ_16M, + .type = MT_DEVICE, + }, { + .virtual = (u32)S3C24XX_VA_ISA_WORD, + .pfn = PA_CS3(BAST_PA_ISAIO), + .length = SZ_16M, + .type = MT_DEVICE, + }, + + /* CPLD control registers, and external interrupt controls */ + { + .virtual = (u32)VR1000_VA_CTRL1, + .pfn = __phys_to_pfn(VR1000_PA_CTRL1), + .length = SZ_1M, + .type = MT_DEVICE, + }, { + .virtual = (u32)VR1000_VA_CTRL2, + .pfn = __phys_to_pfn(VR1000_PA_CTRL2), + .length = SZ_1M, + .type = MT_DEVICE, + }, { + .virtual = (u32)VR1000_VA_CTRL3, + .pfn = __phys_to_pfn(VR1000_PA_CTRL3), + .length = SZ_1M, + .type = MT_DEVICE, + }, { + .virtual = (u32)VR1000_VA_CTRL4, + .pfn = __phys_to_pfn(VR1000_PA_CTRL4), + .length = SZ_1M, + .type = MT_DEVICE, + }, /* peripheral space... one for each of fast/slow/byte/16bit */ /* note, ide is only decoded in word space, even though some registers diff --git a/arch/arm/mach-sa1100/time.c b/arch/arm/mach-sa1100/time.c index 47e0420623f..e4b435e634e 100644 --- a/arch/arm/mach-sa1100/time.c +++ b/arch/arm/mach-sa1100/time.c @@ -124,11 +124,13 @@ static void __init sa1100_timer_init(void) tv.tv_sec = sa1100_get_rtc_time(); do_settimeofday(&tv); - OSMR0 = 0; /* set initial match at 0 */ + OIER = 0; /* disable any timer interrupts */ + OSCR = LATCH*2; /* push OSCR out of the way */ + OSMR0 = LATCH; /* set initial match */ OSSR = 0xf; /* clear status on all timers */ setup_irq(IRQ_OST0, &sa1100_timer_irq); - OIER |= OIER_E0; /* enable match on timer 0 to cause interrupts */ - OSCR = 0; /* initialize free-running timer, force first match */ + OIER = OIER_E0; /* enable match on timer 0 to cause interrupts */ + OSCR = 0; /* initialize free-running timer */ } #ifdef CONFIG_NO_IDLE_HZ diff --git a/arch/arm/mm/mm-armv.c b/arch/arm/mm/mm-armv.c index fb5b40289de..9e50127be63 100644 --- a/arch/arm/mm/mm-armv.c +++ b/arch/arm/mm/mm-armv.c @@ -354,7 +354,7 @@ void __init build_mem_type_table(void) { struct cachepolicy *cp; unsigned int cr = get_cr(); - unsigned int user_pgprot; + unsigned int user_pgprot, kern_pgprot; int cpu_arch = cpu_architecture(); int i; @@ -381,7 +381,7 @@ void __init build_mem_type_table(void) } cp = &cache_policies[cachepolicy]; - user_pgprot = cp->pte; + kern_pgprot = user_pgprot = cp->pte; /* * ARMv6 and above have extended page tables. @@ -393,6 +393,7 @@ void __init build_mem_type_table(void) */ mem_types[MT_MEMORY].prot_sect &= ~PMD_BIT4; mem_types[MT_ROM].prot_sect &= ~PMD_BIT4; + /* * Mark cache clean areas and XIP ROM read only * from SVC mode and no access from userspace. @@ -412,32 +413,47 @@ void __init build_mem_type_table(void) * (iow, non-global) */ user_pgprot |= L_PTE_ASID; + +#ifdef CONFIG_SMP + /* + * Mark memory with the "shared" attribute for SMP systems + */ + user_pgprot |= L_PTE_SHARED; + kern_pgprot |= L_PTE_SHARED; + mem_types[MT_MEMORY].prot_sect |= PMD_SECT_S; +#endif } + for (i = 0; i < 16; i++) { + unsigned long v = pgprot_val(protection_map[i]); + v = (v & ~(L_PTE_BUFFERABLE|L_PTE_CACHEABLE)) | user_pgprot; + protection_map[i] = __pgprot(v); + } + + mem_types[MT_LOW_VECTORS].prot_pte |= kern_pgprot; + mem_types[MT_HIGH_VECTORS].prot_pte |= kern_pgprot; + if (cpu_arch >= CPU_ARCH_ARMv5) { - mem_types[MT_LOW_VECTORS].prot_pte |= cp->pte & PTE_CACHEABLE; - mem_types[MT_HIGH_VECTORS].prot_pte |= cp->pte & PTE_CACHEABLE; +#ifndef CONFIG_SMP + /* + * Only use write-through for non-SMP systems + */ + mem_types[MT_LOW_VECTORS].prot_pte &= ~L_PTE_BUFFERABLE; + mem_types[MT_HIGH_VECTORS].prot_pte &= ~L_PTE_BUFFERABLE; +#endif } else { - mem_types[MT_LOW_VECTORS].prot_pte |= cp->pte; - mem_types[MT_HIGH_VECTORS].prot_pte |= cp->pte; mem_types[MT_MINICLEAN].prot_sect &= ~PMD_SECT_TEX(1); } + pgprot_kernel = __pgprot(L_PTE_PRESENT | L_PTE_YOUNG | + L_PTE_DIRTY | L_PTE_WRITE | + L_PTE_EXEC | kern_pgprot); + mem_types[MT_LOW_VECTORS].prot_l1 |= ecc_mask; mem_types[MT_HIGH_VECTORS].prot_l1 |= ecc_mask; mem_types[MT_MEMORY].prot_sect |= ecc_mask | cp->pmd; mem_types[MT_ROM].prot_sect |= cp->pmd; - for (i = 0; i < 16; i++) { - unsigned long v = pgprot_val(protection_map[i]); - v = (v & ~(PTE_BUFFERABLE|PTE_CACHEABLE)) | user_pgprot; - protection_map[i] = __pgprot(v); - } - - pgprot_kernel = __pgprot(L_PTE_PRESENT | L_PTE_YOUNG | - L_PTE_DIRTY | L_PTE_WRITE | - L_PTE_EXEC | cp->pte); - switch (cp->pmd) { case PMD_SECT_WT: mem_types[MT_CACHECLEAN].prot_sect |= PMD_SECT_WT; diff --git a/arch/arm/mm/proc-v6.S b/arch/arm/mm/proc-v6.S index 9bb5fff406f..92f3ca31b7b 100644 --- a/arch/arm/mm/proc-v6.S +++ b/arch/arm/mm/proc-v6.S @@ -12,6 +12,7 @@ #include <linux/linkage.h> #include <asm/assembler.h> #include <asm/asm-offsets.h> +#include <asm/hardware/arm_scu.h> #include <asm/procinfo.h> #include <asm/pgtable.h> @@ -112,6 +113,9 @@ ENTRY(cpu_v6_dcache_clean_area) ENTRY(cpu_v6_switch_mm) mov r2, #0 ldr r1, [r1, #MM_CONTEXT_ID] @ get mm->context.id +#ifdef CONFIG_SMP + orr r0, r0, #2 @ set shared pgtable +#endif mcr p15, 0, r2, c7, c5, 6 @ flush BTAC/BTB mcr p15, 0, r2, c7, c10, 4 @ drain write buffer mcr p15, 0, r0, c2, c0, 0 @ set TTB 0 @@ -140,7 +144,7 @@ ENTRY(cpu_v6_switch_mm) ENTRY(cpu_v6_set_pte) str r1, [r0], #-2048 @ linux version - bic r2, r1, #0x000007f0 + bic r2, r1, #0x000003f0 bic r2, r2, #0x00000003 orr r2, r2, #PTE_EXT_AP0 | 2 @@ -191,6 +195,23 @@ cpu_v6_name: * - cache type register is implemented */ __v6_setup: +#ifdef CONFIG_SMP + /* Set up the SCU on core 0 only */ + mrc p15, 0, r0, c0, c0, 5 @ CPU core number + ands r0, r0, #15 + moveq r0, #0x10000000 @ SCU_BASE + orreq r0, r0, #0x00100000 + ldreq r5, [r0, #SCU_CTRL] + orreq r5, r5, #1 + streq r5, [r0, #SCU_CTRL] + +#ifndef CONFIG_CPU_DCACHE_DISABLE + mrc p15, 0, r0, c1, c0, 1 @ Enable SMP/nAMP mode + orr r0, r0, #0x20 + mcr p15, 0, r0, c1, c0, 1 +#endif +#endif + mov r0, #0 mcr p15, 0, r0, c7, c14, 0 @ clean+invalidate D cache mcr p15, 0, r0, c7, c5, 0 @ invalidate I cache @@ -198,6 +219,9 @@ __v6_setup: mcr p15, 0, r0, c7, c10, 4 @ drain write buffer mcr p15, 0, r0, c8, c7, 0 @ invalidate I + D TLBs mcr p15, 0, r0, c2, c0, 2 @ TTB control register +#ifdef CONFIG_SMP + orr r4, r4, #2 @ set shared pgtable +#endif mcr p15, 0, r4, c2, c0, 1 @ load TTB1 #ifdef CONFIG_VFP mrc p15, 0, r0, c1, c0, 2 diff --git a/arch/arm/nwfpe/fpa11.h b/arch/arm/nwfpe/fpa11.h index 9677ae8448e..da4c616b6c4 100644 --- a/arch/arm/nwfpe/fpa11.h +++ b/arch/arm/nwfpe/fpa11.h @@ -60,7 +60,7 @@ typedef union tagFPREG { #ifdef CONFIG_FPE_NWFPE_XP floatx80 fExtended; #else - int padding[3]; + u32 padding[3]; #endif } FPREG; diff --git a/arch/arm/nwfpe/fpa11_cpdt.c b/arch/arm/nwfpe/fpa11_cpdt.c index b0db5cbcc3b..32859fa8dcf 100644 --- a/arch/arm/nwfpe/fpa11_cpdt.c +++ b/arch/arm/nwfpe/fpa11_cpdt.c @@ -59,8 +59,13 @@ static inline void loadExtended(const unsigned int Fn, const unsigned int __user p = (unsigned int *) &fpa11->fpreg[Fn].fExtended; fpa11->fType[Fn] = typeExtended; get_user(p[0], &pMem[0]); /* sign & exponent */ +#ifdef __ARMEB__ + get_user(p[1], &pMem[1]); /* ms bits */ + get_user(p[2], &pMem[2]); /* ls bits */ +#else get_user(p[1], &pMem[2]); /* ls bits */ get_user(p[2], &pMem[1]); /* ms bits */ +#endif } #endif @@ -177,8 +182,13 @@ static inline void storeExtended(const unsigned int Fn, unsigned int __user *pMe } put_user(val.i[0], &pMem[0]); /* sign & exp */ +#ifdef __ARMEB__ + put_user(val.i[1], &pMem[1]); /* msw */ + put_user(val.i[2], &pMem[2]); +#else put_user(val.i[1], &pMem[2]); put_user(val.i[2], &pMem[1]); /* msw */ +#endif } #endif diff --git a/arch/arm/nwfpe/fpopcode.c b/arch/arm/nwfpe/fpopcode.c index 4c9f5703148..67ff2ab08ea 100644 --- a/arch/arm/nwfpe/fpopcode.c +++ b/arch/arm/nwfpe/fpopcode.c @@ -29,14 +29,14 @@ #ifdef CONFIG_FPE_NWFPE_XP const floatx80 floatx80Constant[] = { - {0x0000, 0x0000000000000000ULL}, /* extended 0.0 */ - {0x3fff, 0x8000000000000000ULL}, /* extended 1.0 */ - {0x4000, 0x8000000000000000ULL}, /* extended 2.0 */ - {0x4000, 0xc000000000000000ULL}, /* extended 3.0 */ - {0x4001, 0x8000000000000000ULL}, /* extended 4.0 */ - {0x4001, 0xa000000000000000ULL}, /* extended 5.0 */ - {0x3ffe, 0x8000000000000000ULL}, /* extended 0.5 */ - {0x4002, 0xa000000000000000ULL} /* extended 10.0 */ + { .high = 0x0000, .low = 0x0000000000000000ULL},/* extended 0.0 */ + { .high = 0x3fff, .low = 0x8000000000000000ULL},/* extended 1.0 */ + { .high = 0x4000, .low = 0x8000000000000000ULL},/* extended 2.0 */ + { .high = 0x4000, .low = 0xc000000000000000ULL},/* extended 3.0 */ + { .high = 0x4001, .low = 0x8000000000000000ULL},/* extended 4.0 */ + { .high = 0x4001, .low = 0xa000000000000000ULL},/* extended 5.0 */ + { .high = 0x3ffe, .low = 0x8000000000000000ULL},/* extended 0.5 */ + { .high = 0x4002, .low = 0xa000000000000000ULL},/* extended 10.0 */ }; #endif diff --git a/arch/arm/nwfpe/softfloat-specialize b/arch/arm/nwfpe/softfloat-specialize index acf40914476..d4a4c8e0663 100644 --- a/arch/arm/nwfpe/softfloat-specialize +++ b/arch/arm/nwfpe/softfloat-specialize @@ -332,6 +332,7 @@ static floatx80 commonNaNToFloatx80( commonNaNT a ) z.low = LIT64( 0xC000000000000000 ) | ( a.high>>1 ); z.high = ( ( (bits16) a.sign )<<15 ) | 0x7FFF; + z.__padding = 0; return z; } diff --git a/arch/arm/nwfpe/softfloat.c b/arch/arm/nwfpe/softfloat.c index f9f049132a1..0f9656e482b 100644 --- a/arch/arm/nwfpe/softfloat.c +++ b/arch/arm/nwfpe/softfloat.c @@ -531,6 +531,7 @@ INLINE floatx80 packFloatx80( flag zSign, int32 zExp, bits64 zSig ) z.low = zSig; z.high = ( ( (bits16) zSign )<<15 ) + zExp; + z.__padding = 0; return z; } @@ -2831,6 +2832,7 @@ static floatx80 subFloatx80Sigs( struct roundingData *roundData, floatx80 a, flo roundData->exception |= float_flag_invalid; z.low = floatx80_default_nan_low; z.high = floatx80_default_nan_high; + z.__padding = 0; return z; } if ( aExp == 0 ) { @@ -2950,6 +2952,7 @@ floatx80 floatx80_mul( struct roundingData *roundData, floatx80 a, floatx80 b ) roundData->exception |= float_flag_invalid; z.low = floatx80_default_nan_low; z.high = floatx80_default_nan_high; + z.__padding = 0; return z; } return packFloatx80( zSign, 0x7FFF, LIT64( 0x8000000000000000 ) ); @@ -3015,6 +3018,7 @@ floatx80 floatx80_div( struct roundingData *roundData, floatx80 a, floatx80 b ) roundData->exception |= float_flag_invalid; z.low = floatx80_default_nan_low; z.high = floatx80_default_nan_high; + z.__padding = 0; return z; } roundData->exception |= float_flag_divbyzero; @@ -3093,6 +3097,7 @@ floatx80 floatx80_rem( struct roundingData *roundData, floatx80 a, floatx80 b ) roundData->exception |= float_flag_invalid; z.low = floatx80_default_nan_low; z.high = floatx80_default_nan_high; + z.__padding = 0; return z; } normalizeFloatx80Subnormal( bSig, &bExp, &bSig ); @@ -3184,6 +3189,7 @@ floatx80 floatx80_sqrt( struct roundingData *roundData, floatx80 a ) roundData->exception |= float_flag_invalid; z.low = floatx80_default_nan_low; z.high = floatx80_default_nan_high; + z.__padding = 0; return z; } if ( aExp == 0 ) { diff --git a/arch/arm/nwfpe/softfloat.h b/arch/arm/nwfpe/softfloat.h index 14151700b6b..978c699673c 100644 --- a/arch/arm/nwfpe/softfloat.h +++ b/arch/arm/nwfpe/softfloat.h @@ -51,11 +51,17 @@ input or output the `floatx80' type will be defined. Software IEC/IEEE floating-point types. ------------------------------------------------------------------------------- */ -typedef unsigned long int float32; -typedef unsigned long long float64; +typedef u32 float32; +typedef u64 float64; typedef struct { - unsigned short high; - unsigned long long low; +#ifdef __ARMEB__ + u16 __padding; + u16 high; +#else + u16 high; + u16 __padding; +#endif + u64 low; } floatx80; /* diff --git a/arch/arm26/kernel/ptrace.c b/arch/arm26/kernel/ptrace.c index cf7e977d18c..4e6b7356a72 100644 --- a/arch/arm26/kernel/ptrace.c +++ b/arch/arm26/kernel/ptrace.c @@ -546,7 +546,7 @@ static int ptrace_setfpregs(struct task_struct *tsk, void *ufp) sizeof(struct user_fp)) ? -EFAULT : 0; } -static int do_ptrace(int request, struct task_struct *child, long addr, long data) +long arch_ptrace(struct task_struct *child, long request, long addr, long data) { unsigned long tmp; int ret; @@ -665,53 +665,6 @@ static int do_ptrace(int request, struct task_struct *child, long addr, long dat return ret; } -asmlinkage long sys_ptrace(long request, long pid, long addr, long data) -{ - struct task_struct *child; - int ret; - - lock_kernel(); - ret = -EPERM; - if (request == PTRACE_TRACEME) { - /* are we already being traced? */ - if (current->ptrace & PT_PTRACED) - goto out; - ret = security_ptrace(current->parent, current); - if (ret) - goto out; - /* set the ptrace bit in the process flags. */ - current->ptrace |= PT_PTRACED; - ret = 0; - goto out; - } - ret = -ESRCH; - read_lock(&tasklist_lock); - child = find_task_by_pid(pid); - if (child) - get_task_struct(child); - read_unlock(&tasklist_lock); - if (!child) - goto out; - - ret = -EPERM; - if (pid == 1) /* you may not mess with init */ - goto out_tsk; - - if (request == PTRACE_ATTACH) { - ret = ptrace_attach(child); - goto out_tsk; - } - ret = ptrace_check_attach(child, request == PTRACE_KILL); - if (ret == 0) - ret = do_ptrace(request, child, addr, data); - -out_tsk: - put_task_struct(child); -out: - unlock_kernel(); - return ret; -} - asmlinkage void syscall_trace(int why, struct pt_regs *regs) { unsigned long ip; diff --git a/arch/cris/arch-v10/README.mm b/arch/cris/arch-v10/README.mm index 6f08903f313..517d1f027fe 100644 --- a/arch/cris/arch-v10/README.mm +++ b/arch/cris/arch-v10/README.mm @@ -177,7 +177,7 @@ The example address is 0xd004000c; in binary this is: Given the top-level Page Directory, the offset in that directory is calculated using the upper 8 bits: -extern inline pgd_t * pgd_offset(struct mm_struct * mm, unsigned long address) +static inline pgd_t * pgd_offset(struct mm_struct * mm, unsigned long address) { return mm->pgd + (address >> PGDIR_SHIFT); } @@ -190,14 +190,14 @@ The pgd_t from our example will therefore be the 208'th (0xd0) entry in mm->pgd. Since the Middle Directory does not exist, it is a unity mapping: -extern inline pmd_t * pmd_offset(pgd_t * dir, unsigned long address) +static inline pmd_t * pmd_offset(pgd_t * dir, unsigned long address) { return (pmd_t *) dir; } The Page Table provides the final lookup by using bits 13 to 23 as index: -extern inline pte_t * pte_offset(pmd_t * dir, unsigned long address) +static inline pte_t * pte_offset(pmd_t * dir, unsigned long address) { return (pte_t *) pmd_page(*dir) + ((address >> PAGE_SHIFT) & (PTRS_PER_PTE - 1)); diff --git a/arch/cris/arch-v10/kernel/ptrace.c b/arch/cris/arch-v10/kernel/ptrace.c index 130dd214e41..6cbd34a27b9 100644 --- a/arch/cris/arch-v10/kernel/ptrace.c +++ b/arch/cris/arch-v10/kernel/ptrace.c @@ -76,55 +76,11 @@ ptrace_disable(struct task_struct *child) * (in user space) where the result of the ptrace call is written (instead of * being returned). */ -asmlinkage int -sys_ptrace(long request, long pid, long addr, long data) +long arch_ptrace(struct task_struct *child, long request, long addr, long data) { - struct task_struct *child; int ret; unsigned long __user *datap = (unsigned long __user *)data; - lock_kernel(); - ret = -EPERM; - - if (request == PTRACE_TRACEME) { - /* are we already being traced? */ - if (current->ptrace & PT_PTRACED) - goto out; - ret = security_ptrace(current->parent, current); - if (ret) - goto out; - /* set the ptrace bit in the process flags. */ - current->ptrace |= PT_PTRACED; - ret = 0; - goto out; - } - - ret = -ESRCH; - read_lock(&tasklist_lock); - child = find_task_by_pid(pid); - - if (child) - get_task_struct(child); - - read_unlock(&tasklist_lock); - - if (!child) - goto out; - - ret = -EPERM; - - if (pid == 1) /* Leave the init process alone! */ - goto out_tsk; - - if (request == PTRACE_ATTACH) { - ret = ptrace_attach(child); - goto out_tsk; - } - - ret = ptrace_check_attach(child, request == PTRACE_KILL); - if (ret < 0) - goto out_tsk; - switch (request) { /* Read word at location address. */ case PTRACE_PEEKTEXT: @@ -289,10 +245,7 @@ sys_ptrace(long request, long pid, long addr, long data) ret = ptrace_request(child, request, addr, data); break; } -out_tsk: - put_task_struct(child); -out: - unlock_kernel(); + return ret; } diff --git a/arch/cris/arch-v10/kernel/signal.c b/arch/cris/arch-v10/kernel/signal.c index 693771961f8..19bcad05716 100644 --- a/arch/cris/arch-v10/kernel/signal.c +++ b/arch/cris/arch-v10/kernel/signal.c @@ -476,7 +476,7 @@ give_sigsegv: * OK, we're invoking a handler */ -extern inline void +static inline void handle_signal(int canrestart, unsigned long sig, siginfo_t *info, struct k_sigaction *ka, sigset_t *oldset, struct pt_regs * regs) diff --git a/arch/cris/arch-v32/drivers/cryptocop.c b/arch/cris/arch-v32/drivers/cryptocop.c index ca72076c630..501fa52d8d3 100644 --- a/arch/cris/arch-v32/drivers/cryptocop.c +++ b/arch/cris/arch-v32/drivers/cryptocop.c @@ -277,7 +277,7 @@ struct file_operations cryptocop_fops = { static void free_cdesc(struct cryptocop_dma_desc *cdesc) { DEBUG(printk("free_cdesc: cdesc 0x%p, from_pool=%d\n", cdesc, cdesc->from_pool)); - if (cdesc->free_buf) kfree(cdesc->free_buf); + kfree(cdesc->free_buf); if (cdesc->from_pool) { unsigned long int flags; @@ -2950,15 +2950,15 @@ static int cryptocop_ioctl_process(struct inode *inode, struct file *filp, unsig put_page(outpages[i]); } - if (digest_result) kfree(digest_result); - if (inpages) kfree(inpages); - if (outpages) kfree(outpages); + kfree(digest_result); + kfree(inpages); + kfree(outpages); if (cop){ - if (cop->tfrm_op.indata) kfree(cop->tfrm_op.indata); - if (cop->tfrm_op.outdata) kfree(cop->tfrm_op.outdata); + kfree(cop->tfrm_op.indata); + kfree(cop->tfrm_op.outdata); kfree(cop); } - if (jc) kfree(jc); + kfree(jc); DEBUG(print_lock_status()); diff --git a/arch/cris/arch-v32/kernel/ptrace.c b/arch/cris/arch-v32/kernel/ptrace.c index 208489da2a8..5528b83a622 100644 --- a/arch/cris/arch-v32/kernel/ptrace.c +++ b/arch/cris/arch-v32/kernel/ptrace.c @@ -99,55 +99,11 @@ ptrace_disable(struct task_struct *child) } -asmlinkage int -sys_ptrace(long request, long pid, long addr, long data) +long arch_ptrace(struct task_struct *child, long request, long addr, long data) { - struct task_struct *child; int ret; unsigned long __user *datap = (unsigned long __user *)data; - lock_kernel(); - ret = -EPERM; - - if (request == PTRACE_TRACEME) { - /* are we already being traced? */ - if (current->ptrace & PT_PTRACED) - goto out; - ret = security_ptrace(current->parent, current); - if (ret) - goto out; - /* set the ptrace bit in the process flags. */ - current->ptrace |= PT_PTRACED; - ret = 0; - goto out; - } - - ret = -ESRCH; - read_lock(&tasklist_lock); - child = find_task_by_pid(pid); - - if (child) - get_task_struct(child); - - read_unlock(&tasklist_lock); - - if (!child) - goto out; - - ret = -EPERM; - - if (pid == 1) /* Leave the init process alone! */ - goto out_tsk; - - if (request == PTRACE_ATTACH) { - ret = ptrace_attach(child); - goto out_tsk; - } - - ret = ptrace_check_attach(child, request == PTRACE_KILL); - if (ret < 0) - goto out_tsk; - switch (request) { /* Read word at location address. */ case PTRACE_PEEKTEXT: @@ -347,10 +303,7 @@ sys_ptrace(long request, long pid, long addr, long data) ret = ptrace_request(child, request, addr, data); break; } -out_tsk: - put_task_struct(child); -out: - unlock_kernel(); + return ret; } diff --git a/arch/cris/arch-v32/kernel/signal.c b/arch/cris/arch-v32/kernel/signal.c index 0a3614dab88..99e59b3eacf 100644 --- a/arch/cris/arch-v32/kernel/signal.c +++ b/arch/cris/arch-v32/kernel/signal.c @@ -513,7 +513,7 @@ give_sigsegv: } /* Invoke a singal handler to, well, handle the signal. */ -extern inline void +static inline void handle_signal(int canrestart, unsigned long sig, siginfo_t *info, struct k_sigaction *ka, sigset_t *oldset, struct pt_regs * regs) diff --git a/arch/cris/mm/ioremap.c b/arch/cris/mm/ioremap.c index a92ac987758..1780df3ed9e 100644 --- a/arch/cris/mm/ioremap.c +++ b/arch/cris/mm/ioremap.c @@ -16,7 +16,7 @@ #include <asm/tlbflush.h> #include <asm/arch/memmap.h> -extern inline void remap_area_pte(pte_t * pte, unsigned long address, unsigned long size, +static inline void remap_area_pte(pte_t * pte, unsigned long address, unsigned long size, unsigned long phys_addr, pgprot_t prot) { unsigned long end; diff --git a/arch/frv/kernel/ptrace.c b/arch/frv/kernel/ptrace.c index cb335a14a31..f953484e7d5 100644 --- a/arch/frv/kernel/ptrace.c +++ b/arch/frv/kernel/ptrace.c @@ -106,48 +106,11 @@ void ptrace_enable(struct task_struct *child) child->thread.frame0->__status |= REG__STATUS_STEP; } -asmlinkage long sys_ptrace(long request, long pid, long addr, long data) +long arch_ptrace(struct task_struct *child, long request, long addr, long data) { - struct task_struct *child; unsigned long tmp; int ret; - lock_kernel(); - ret = -EPERM; - if (request == PTRACE_TRACEME) { - /* are we already being traced? */ - if (current->ptrace & PT_PTRACED) - goto out; - ret = security_ptrace(current->parent, current); - if (ret) - goto out; - /* set the ptrace bit in the process flags. */ - current->ptrace |= PT_PTRACED; - ret = 0; - goto out; - } - ret = -ESRCH; - read_lock(&tasklist_lock); - child = find_task_by_pid(pid); - if (child) - get_task_struct(child); - read_unlock(&tasklist_lock); - if (!child) - goto out; - - ret = -EPERM; - if (pid == 1) /* you may not mess with init */ - goto out_tsk; - - if (request == PTRACE_ATTACH) { - ret = ptrace_attach(child); - goto out_tsk; - } - - ret = ptrace_check_attach(child, request == PTRACE_KILL); - if (ret < 0) - goto out_tsk; - switch (request) { /* when I and D space are separate, these will need to be fixed. */ case PTRACE_PEEKTEXT: /* read word at location addr. */ @@ -351,10 +314,6 @@ asmlinkage long sys_ptrace(long request, long pid, long addr, long data) ret = -EIO; break; } -out_tsk: - put_task_struct(child); -out: - unlock_kernel(); return ret; } diff --git a/arch/h8300/kernel/ptrace.c b/arch/h8300/kernel/ptrace.c index a569fe4aa28..0ff6f79b0fe 100644 --- a/arch/h8300/kernel/ptrace.c +++ b/arch/h8300/kernel/ptrace.c @@ -57,43 +57,10 @@ void ptrace_disable(struct task_struct *child) h8300_disable_trace(child); } -asmlinkage long sys_ptrace(long request, long pid, long addr, long data) +long arch_ptrace(struct task_struct *child, long request, long addr, long data) { - struct task_struct *child; int ret; - lock_kernel(); - ret = -EPERM; - if (request == PTRACE_TRACEME) { - /* are we already being traced? */ - if (current->ptrace & PT_PTRACED) - goto out; - /* set the ptrace bit in the process flags. */ - current->ptrace |= PT_PTRACED; - ret = 0; - goto out; - } - ret = -ESRCH; - read_lock(&tasklist_lock); - child = find_task_by_pid(pid); - if (child) - get_task_struct(child); - read_unlock(&tasklist_lock); - if (!child) - goto out; - - ret = -EPERM; - if (pid == 1) /* you may not mess with init */ - goto out_tsk; - - if (request == PTRACE_ATTACH) { - ret = ptrace_attach(child); - goto out_tsk; - } - ret = ptrace_check_attach(child, request == PTRACE_KILL); - if (ret < 0) - goto out_tsk; - switch (request) { case PTRACE_PEEKTEXT: /* read word at location addr. */ case PTRACE_PEEKDATA: { @@ -251,10 +218,6 @@ asmlinkage long sys_ptrace(long request, long pid, long addr, long data) ret = -EIO; break; } -out_tsk: - put_task_struct(child); -out: - unlock_kernel(); return ret; } diff --git a/arch/i386/Kconfig b/arch/i386/Kconfig index bac0da731ee..dbf90ad6eac 100644 --- a/arch/i386/Kconfig +++ b/arch/i386/Kconfig @@ -997,8 +997,21 @@ source "drivers/Kconfig" source "fs/Kconfig" +menu "Instrumentation Support" + depends on EXPERIMENTAL + source "arch/i386/oprofile/Kconfig" +config KPROBES + bool "Kprobes (EXPERIMENTAL)" + help + Kprobes allows you to trap at almost any kernel address and + execute a callback function. register_kprobe() establishes + a probepoint and specifies the callback. Kprobes is useful + for kernel debugging, non-intrusive instrumentation and testing. + If in doubt, say "N". +endmenu + source "arch/i386/Kconfig.debug" source "security/Kconfig" diff --git a/arch/i386/Kconfig.debug b/arch/i386/Kconfig.debug index 5228c40a6fb..c48b424dd64 100644 --- a/arch/i386/Kconfig.debug +++ b/arch/i386/Kconfig.debug @@ -22,16 +22,6 @@ config DEBUG_STACKOVERFLOW This option will cause messages to be printed if free stack space drops below a certain limit. -config KPROBES - bool "Kprobes" - depends on DEBUG_KERNEL - help - Kprobes allows you to trap at almost any kernel address and - execute a callback function. register_kprobe() establishes - a probepoint and specifies the callback. Kprobes is useful - for kernel debugging, non-intrusive instrumentation and testing. - If in doubt, say "N". - config DEBUG_STACK_USAGE bool "Stack utilization instrumentation" depends on DEBUG_KERNEL diff --git a/arch/i386/kernel/apic.c b/arch/i386/kernel/apic.c index 7c724ffa08b..496a2c9909f 100644 --- a/arch/i386/kernel/apic.c +++ b/arch/i386/kernel/apic.c @@ -559,14 +559,20 @@ void __devinit setup_local_APIC(void) * If Linux enabled the LAPIC against the BIOS default * disable it down before re-entering the BIOS on shutdown. * Otherwise the BIOS may get confused and not power-off. + * Additionally clear all LVT entries before disable_local_APIC + * for the case where Linux didn't enable the LAPIC. */ void lapic_shutdown(void) { - if (!cpu_has_apic || !enabled_via_apicbase) + if (!cpu_has_apic) return; local_irq_disable(); - disable_local_APIC(); + clear_local_APIC(); + + if (enabled_via_apicbase) + disable_local_APIC(); + local_irq_enable(); } diff --git a/arch/i386/kernel/apm.c b/arch/i386/kernel/apm.c index d2ef0c2aa93..86e80c55147 100644 --- a/arch/i386/kernel/apm.c +++ b/arch/i386/kernel/apm.c @@ -447,8 +447,7 @@ static char * apm_event_name[] = { "system standby resume", "capabilities change" }; -#define NR_APM_EVENT_NAME \ - (sizeof(apm_event_name) / sizeof(apm_event_name[0])) +#define NR_APM_EVENT_NAME ARRAY_SIZE(apm_event_name) typedef struct lookup_t { int key; @@ -479,7 +478,7 @@ static const lookup_t error_table[] = { { APM_NO_ERROR, "BIOS did not set a return code" }, { APM_NOT_PRESENT, "No APM present" } }; -#define ERROR_COUNT (sizeof(error_table)/sizeof(lookup_t)) +#define ERROR_COUNT ARRAY_SIZE(error_table) /** * apm_error - display an APM error diff --git a/arch/i386/kernel/cpu/common.c b/arch/i386/kernel/cpu/common.c index 74145a33cb0..c145fb30002 100644 --- a/arch/i386/kernel/cpu/common.c +++ b/arch/i386/kernel/cpu/common.c @@ -30,8 +30,6 @@ static int disable_x86_serial_nr __devinitdata = 1; struct cpu_dev * cpu_devs[X86_VENDOR_NUM] = {}; -extern void mcheck_init(struct cpuinfo_x86 *c); - extern int disable_pse; static void default_init(struct cpuinfo_x86 * c) @@ -429,9 +427,8 @@ void __devinit identify_cpu(struct cpuinfo_x86 *c) } /* Init Machine Check Exception if available. */ -#ifdef CONFIG_X86_MCE mcheck_init(c); -#endif + if (c == &boot_cpu_data) sysenter_setup(); enable_sep_cpu(); diff --git a/arch/i386/kernel/cpu/cpufreq/acpi-cpufreq.c b/arch/i386/kernel/cpu/cpufreq/acpi-cpufreq.c index caa9f771134..871366b83b3 100644 --- a/arch/i386/kernel/cpu/cpufreq/acpi-cpufreq.c +++ b/arch/i386/kernel/cpu/cpufreq/acpi-cpufreq.c @@ -377,10 +377,9 @@ acpi_cpufreq_cpu_init ( arg0.buffer.length = 12; arg0.buffer.pointer = (u8 *) arg0_buf; - data = kmalloc(sizeof(struct cpufreq_acpi_io), GFP_KERNEL); + data = kzalloc(sizeof(struct cpufreq_acpi_io), GFP_KERNEL); if (!data) return (-ENOMEM); - memset(data, 0, sizeof(struct cpufreq_acpi_io)); acpi_io_data[cpu] = data; diff --git a/arch/i386/kernel/cpu/cpufreq/powernow-k7.c b/arch/i386/kernel/cpu/cpufreq/powernow-k7.c index 73a5dc5b26b..edcd626001d 100644 --- a/arch/i386/kernel/cpu/cpufreq/powernow-k7.c +++ b/arch/i386/kernel/cpu/cpufreq/powernow-k7.c @@ -171,10 +171,9 @@ static int get_ranges (unsigned char *pst) unsigned int speed; u8 fid, vid; - powernow_table = kmalloc((sizeof(struct cpufreq_frequency_table) * (number_scales + 1)), GFP_KERNEL); + powernow_table = kzalloc((sizeof(struct cpufreq_frequency_table) * (number_scales + 1)), GFP_KERNEL); if (!powernow_table) return -ENOMEM; - memset(powernow_table, 0, (sizeof(struct cpufreq_frequency_table) * (number_scales + 1))); for (j=0 ; j < number_scales; j++) { fid = *pst++; @@ -305,16 +304,13 @@ static int powernow_acpi_init(void) goto err0; } - acpi_processor_perf = kmalloc(sizeof(struct acpi_processor_performance), + acpi_processor_perf = kzalloc(sizeof(struct acpi_processor_performance), GFP_KERNEL); - if (!acpi_processor_perf) { retval = -ENOMEM; goto err0; } - memset(acpi_processor_perf, 0, sizeof(struct acpi_processor_performance)); - if (acpi_processor_register_performance(acpi_processor_perf, 0)) { retval = -EIO; goto err1; @@ -337,14 +333,12 @@ static int powernow_acpi_init(void) goto err2; } - powernow_table = kmalloc((number_scales + 1) * (sizeof(struct cpufreq_frequency_table)), GFP_KERNEL); + powernow_table = kzalloc((number_scales + 1) * (sizeof(struct cpufreq_frequency_table)), GFP_KERNEL); if (!powernow_table) { retval = -ENOMEM; goto err2; } - memset(powernow_table, 0, ((number_scales + 1) * sizeof(struct cpufreq_frequency_table))); - pc.val = (unsigned long) acpi_processor_perf->states[0].control; for (i = 0; i < number_scales; i++) { u8 fid, vid; diff --git a/arch/i386/kernel/cpu/cpufreq/powernow-k8.c b/arch/i386/kernel/cpu/cpufreq/powernow-k8.c index 2d5c9adba0c..68a1fc87f4c 100644 --- a/arch/i386/kernel/cpu/cpufreq/powernow-k8.c +++ b/arch/i386/kernel/cpu/cpufreq/powernow-k8.c @@ -462,7 +462,6 @@ static int check_supported_cpu(unsigned int cpu) oldmask = current->cpus_allowed; set_cpus_allowed(current, cpumask_of_cpu(cpu)); - schedule(); if (smp_processor_id() != cpu) { printk(KERN_ERR "limiting to cpu %u failed\n", cpu); @@ -497,9 +496,7 @@ static int check_supported_cpu(unsigned int cpu) out: set_cpus_allowed(current, oldmask); - schedule(); return rc; - } static int check_pst_table(struct powernow_k8_data *data, struct pst_s *pst, u8 maxvid) @@ -913,7 +910,6 @@ static int powernowk8_target(struct cpufreq_policy *pol, unsigned targfreq, unsi /* only run on specific CPU from here on */ oldmask = current->cpus_allowed; set_cpus_allowed(current, cpumask_of_cpu(pol->cpu)); - schedule(); if (smp_processor_id() != pol->cpu) { printk(KERN_ERR "limiting to cpu %u failed\n", pol->cpu); @@ -968,8 +964,6 @@ static int powernowk8_target(struct cpufreq_policy *pol, unsigned targfreq, unsi err_out: set_cpus_allowed(current, oldmask); - schedule(); - return ret; } @@ -991,12 +985,11 @@ static int __init powernowk8_cpu_init(struct cpufreq_policy *pol) if (!check_supported_cpu(pol->cpu)) return -ENODEV; - data = kmalloc(sizeof(struct powernow_k8_data), GFP_KERNEL); + data = kzalloc(sizeof(struct powernow_k8_data), GFP_KERNEL); if (!data) { printk(KERN_ERR PFX "unable to alloc powernow_k8_data"); return -ENOMEM; } - memset(data,0,sizeof(struct powernow_k8_data)); data->cpu = pol->cpu; @@ -1026,7 +1019,6 @@ static int __init powernowk8_cpu_init(struct cpufreq_policy *pol) /* only run on specific CPU from here on */ oldmask = current->cpus_allowed; set_cpus_allowed(current, cpumask_of_cpu(pol->cpu)); - schedule(); if (smp_processor_id() != pol->cpu) { printk(KERN_ERR "limiting to cpu %u failed\n", pol->cpu); @@ -1045,7 +1037,6 @@ static int __init powernowk8_cpu_init(struct cpufreq_policy *pol) /* run on any CPU again */ set_cpus_allowed(current, oldmask); - schedule(); pol->governor = CPUFREQ_DEFAULT_GOVERNOR; pol->cpus = cpu_core_map[pol->cpu]; @@ -1080,7 +1071,6 @@ static int __init powernowk8_cpu_init(struct cpufreq_policy *pol) err_out: set_cpus_allowed(current, oldmask); - schedule(); powernow_k8_cpu_exit_acpi(data); kfree(data); @@ -1116,17 +1106,14 @@ static unsigned int powernowk8_get (unsigned int cpu) set_cpus_allowed(current, oldmask); return 0; } - preempt_disable(); - + if (query_current_values_with_pending_wait(data)) goto out; khz = find_khz_freq_from_fid(data->currfid); - out: - preempt_enable_no_resched(); +out: set_cpus_allowed(current, oldmask); - return khz; } diff --git a/arch/i386/kernel/cpu/cpufreq/speedstep-centrino.c b/arch/i386/kernel/cpu/cpufreq/speedstep-centrino.c index 1465974256c..edb9873e27e 100644 --- a/arch/i386/kernel/cpu/cpufreq/speedstep-centrino.c +++ b/arch/i386/kernel/cpu/cpufreq/speedstep-centrino.c @@ -67,7 +67,7 @@ static const struct cpu_id cpu_ids[] = { [CPU_MP4HT_D0] = {15, 3, 4 }, [CPU_MP4HT_E0] = {15, 4, 1 }, }; -#define N_IDS (sizeof(cpu_ids)/sizeof(cpu_ids[0])) +#define N_IDS ARRAY_SIZE(cpu_ids) struct cpu_model { @@ -423,12 +423,11 @@ static int centrino_cpu_init_acpi(struct cpufreq_policy *policy) } } - centrino_model[cpu] = kmalloc(sizeof(struct cpu_model), GFP_KERNEL); + centrino_model[cpu] = kzalloc(sizeof(struct cpu_model), GFP_KERNEL); if (!centrino_model[cpu]) { result = -ENOMEM; goto err_unreg; } - memset(centrino_model[cpu], 0, sizeof(struct cpu_model)); centrino_model[cpu]->model_name=NULL; centrino_model[cpu]->max_freq = p.states[0].core_frequency * 1000; diff --git a/arch/i386/kernel/cpu/mcheck/k7.c b/arch/i386/kernel/cpu/mcheck/k7.c index 7c6b9c73522..fc5d5215e23 100644 --- a/arch/i386/kernel/cpu/mcheck/k7.c +++ b/arch/i386/kernel/cpu/mcheck/k7.c @@ -68,7 +68,7 @@ static fastcall void k7_machine_check(struct pt_regs * regs, long error_code) /* AMD K7 machine check is Intel like */ -void __devinit amd_mcheck_init(struct cpuinfo_x86 *c) +void amd_mcheck_init(struct cpuinfo_x86 *c) { u32 l, h; int i; diff --git a/arch/i386/kernel/cpu/mcheck/mce.c b/arch/i386/kernel/cpu/mcheck/mce.c index 2cf25d2ba0f..6170af3c271 100644 --- a/arch/i386/kernel/cpu/mcheck/mce.c +++ b/arch/i386/kernel/cpu/mcheck/mce.c @@ -16,7 +16,7 @@ #include "mce.h" -int mce_disabled __devinitdata = 0; +int mce_disabled = 0; int nr_mce_banks; EXPORT_SYMBOL_GPL(nr_mce_banks); /* non-fatal.o */ @@ -31,7 +31,7 @@ static fastcall void unexpected_machine_check(struct pt_regs * regs, long error_ void fastcall (*machine_check_vector)(struct pt_regs *, long error_code) = unexpected_machine_check; /* This has to be run for each processor */ -void __devinit mcheck_init(struct cpuinfo_x86 *c) +void mcheck_init(struct cpuinfo_x86 *c) { if (mce_disabled==1) return; diff --git a/arch/i386/kernel/cpu/mcheck/p4.c b/arch/i386/kernel/cpu/mcheck/p4.c index 1d1e885f500..fd2c459a31e 100644 --- a/arch/i386/kernel/cpu/mcheck/p4.c +++ b/arch/i386/kernel/cpu/mcheck/p4.c @@ -77,7 +77,7 @@ fastcall void smp_thermal_interrupt(struct pt_regs *regs) } /* P4/Xeon Thermal regulation detect and init */ -static void __devinit intel_init_thermal(struct cpuinfo_x86 *c) +static void intel_init_thermal(struct cpuinfo_x86 *c) { u32 l, h; unsigned int cpu = smp_processor_id(); @@ -231,7 +231,7 @@ static fastcall void intel_machine_check(struct pt_regs * regs, long error_code) } -void __devinit intel_p4_mcheck_init(struct cpuinfo_x86 *c) +void intel_p4_mcheck_init(struct cpuinfo_x86 *c) { u32 l, h; int i; diff --git a/arch/i386/kernel/cpu/mcheck/p5.c b/arch/i386/kernel/cpu/mcheck/p5.c index 3a2e24baddc..94bc43d950c 100644 --- a/arch/i386/kernel/cpu/mcheck/p5.c +++ b/arch/i386/kernel/cpu/mcheck/p5.c @@ -28,7 +28,7 @@ static fastcall void pentium_machine_check(struct pt_regs * regs, long error_cod } /* Set up machine check reporting for processors with Intel style MCE */ -void __devinit intel_p5_mcheck_init(struct cpuinfo_x86 *c) +void intel_p5_mcheck_init(struct cpuinfo_x86 *c) { u32 l, h; diff --git a/arch/i386/kernel/cpu/mcheck/p6.c b/arch/i386/kernel/cpu/mcheck/p6.c index 979b18bc95c..deeae42ce19 100644 --- a/arch/i386/kernel/cpu/mcheck/p6.c +++ b/arch/i386/kernel/cpu/mcheck/p6.c @@ -79,7 +79,7 @@ static fastcall void intel_machine_check(struct pt_regs * regs, long error_code) } /* Set up machine check reporting for processors with Intel style MCE */ -void __devinit intel_p6_mcheck_init(struct cpuinfo_x86 *c) +void intel_p6_mcheck_init(struct cpuinfo_x86 *c) { u32 l, h; int i; diff --git a/arch/i386/kernel/cpu/mcheck/winchip.c b/arch/i386/kernel/cpu/mcheck/winchip.c index 5b9d2dd411d..9e424b6c293 100644 --- a/arch/i386/kernel/cpu/mcheck/winchip.c +++ b/arch/i386/kernel/cpu/mcheck/winchip.c @@ -22,7 +22,7 @@ static fastcall void winchip_machine_check(struct pt_regs * regs, long error_cod } /* Set up machine check reporting on the Winchip C6 series */ -void __devinit winchip_mcheck_init(struct cpuinfo_x86 *c) +void winchip_mcheck_init(struct cpuinfo_x86 *c) { u32 lo, hi; machine_check_vector = winchip_machine_check; diff --git a/arch/i386/kernel/kprobes.c b/arch/i386/kernel/kprobes.c index 6345b430b10..32b0c24ab9a 100644 --- a/arch/i386/kernel/kprobes.c +++ b/arch/i386/kernel/kprobes.c @@ -31,22 +31,16 @@ #include <linux/config.h> #include <linux/kprobes.h> #include <linux/ptrace.h> -#include <linux/spinlock.h> #include <linux/preempt.h> #include <asm/cacheflush.h> #include <asm/kdebug.h> #include <asm/desc.h> -static struct kprobe *current_kprobe; -static unsigned long kprobe_status, kprobe_old_eflags, kprobe_saved_eflags; -static struct kprobe *kprobe_prev; -static unsigned long kprobe_status_prev, kprobe_old_eflags_prev, kprobe_saved_eflags_prev; -static struct pt_regs jprobe_saved_regs; -static long *jprobe_saved_esp; -/* copy of the kernel stack at the probe fire time */ -static kprobe_opcode_t jprobes_stack[MAX_STACK_SIZE]; void jprobe_return_end(void); +DEFINE_PER_CPU(struct kprobe *, current_kprobe) = NULL; +DEFINE_PER_CPU(struct kprobe_ctlblk, kprobe_ctlblk); + /* * returns non-zero if opcode modifies the interrupt flag. */ @@ -91,29 +85,30 @@ void __kprobes arch_remove_kprobe(struct kprobe *p) { } -static inline void save_previous_kprobe(void) +static inline void save_previous_kprobe(struct kprobe_ctlblk *kcb) { - kprobe_prev = current_kprobe; - kprobe_status_prev = kprobe_status; - kprobe_old_eflags_prev = kprobe_old_eflags; - kprobe_saved_eflags_prev = kprobe_saved_eflags; + kcb->prev_kprobe.kp = kprobe_running(); + kcb->prev_kprobe.status = kcb->kprobe_status; + kcb->prev_kprobe.old_eflags = kcb->kprobe_old_eflags; + kcb->prev_kprobe.saved_eflags = kcb->kprobe_saved_eflags; } -static inline void restore_previous_kprobe(void) +static inline void restore_previous_kprobe(struct kprobe_ctlblk *kcb) { - current_kprobe = kprobe_prev; - kprobe_status = kprobe_status_prev; - kprobe_old_eflags = kprobe_old_eflags_prev; - kprobe_saved_eflags = kprobe_saved_eflags_prev; + __get_cpu_var(current_kprobe) = kcb->prev_kprobe.kp; + kcb->kprobe_status = kcb->prev_kprobe.status; + kcb->kprobe_old_eflags = kcb->prev_kprobe.old_eflags; + kcb->kprobe_saved_eflags = kcb->prev_kprobe.saved_eflags; } -static inline void set_current_kprobe(struct kprobe *p, struct pt_regs *regs) +static inline void set_current_kprobe(struct kprobe *p, struct pt_regs *regs, + struct kprobe_ctlblk *kcb) { - current_kprobe = p; - kprobe_saved_eflags = kprobe_old_eflags + __get_cpu_var(current_kprobe) = p; + kcb->kprobe_saved_eflags = kcb->kprobe_old_eflags = (regs->eflags & (TF_MASK | IF_MASK)); if (is_IF_modifier(p->opcode)) - kprobe_saved_eflags &= ~IF_MASK; + kcb->kprobe_saved_eflags &= ~IF_MASK; } static inline void prepare_singlestep(struct kprobe *p, struct pt_regs *regs) @@ -127,6 +122,7 @@ static inline void prepare_singlestep(struct kprobe *p, struct pt_regs *regs) regs->eip = (unsigned long)&p->ainsn.insn; } +/* Called with kretprobe_lock held */ void __kprobes arch_prepare_kretprobe(struct kretprobe *rp, struct pt_regs *regs) { @@ -157,9 +153,15 @@ static int __kprobes kprobe_handler(struct pt_regs *regs) int ret = 0; kprobe_opcode_t *addr = NULL; unsigned long *lp; + struct kprobe_ctlblk *kcb; - /* We're in an interrupt, but this is clear and BUG()-safe. */ + /* + * We don't want to be preempted for the entire + * duration of kprobe processing + */ preempt_disable(); + kcb = get_kprobe_ctlblk(); + /* Check if the application is using LDT entry for its code segment and * calculate the address by reading the base address from the LDT entry. */ @@ -173,15 +175,12 @@ static int __kprobes kprobe_handler(struct pt_regs *regs) } /* Check we're not actually recursing */ if (kprobe_running()) { - /* We *are* holding lock here, so this is safe. - Disarm the probe we just hit, and ignore it. */ p = get_kprobe(addr); if (p) { - if (kprobe_status == KPROBE_HIT_SS && + if (kcb->kprobe_status == KPROBE_HIT_SS && *p->ainsn.insn == BREAKPOINT_INSTRUCTION) { regs->eflags &= ~TF_MASK; - regs->eflags |= kprobe_saved_eflags; - unlock_kprobes(); + regs->eflags |= kcb->kprobe_saved_eflags; goto no_kprobe; } /* We have reentered the kprobe_handler(), since @@ -190,26 +189,23 @@ static int __kprobes kprobe_handler(struct pt_regs *regs) * just single step on the instruction of the new probe * without calling any user handlers. */ - save_previous_kprobe(); - set_current_kprobe(p, regs); + save_previous_kprobe(kcb); + set_current_kprobe(p, regs, kcb); p->nmissed++; prepare_singlestep(p, regs); - kprobe_status = KPROBE_REENTER; + kcb->kprobe_status = KPROBE_REENTER; return 1; } else { - p = current_kprobe; + p = __get_cpu_var(current_kprobe); if (p->break_handler && p->break_handler(p, regs)) { goto ss_probe; } } - /* If it's not ours, can't be delete race, (we hold lock). */ goto no_kprobe; } - lock_kprobes(); p = get_kprobe(addr); if (!p) { - unlock_kprobes(); if (regs->eflags & VM_MASK) { /* We are in virtual-8086 mode. Return 0 */ goto no_kprobe; @@ -232,8 +228,8 @@ static int __kprobes kprobe_handler(struct pt_regs *regs) goto no_kprobe; } - kprobe_status = KPROBE_HIT_ACTIVE; - set_current_kprobe(p, regs); + set_current_kprobe(p, regs, kcb); + kcb->kprobe_status = KPROBE_HIT_ACTIVE; if (p->pre_handler && p->pre_handler(p, regs)) /* handler has already set things up, so skip ss setup */ @@ -241,7 +237,7 @@ static int __kprobes kprobe_handler(struct pt_regs *regs) ss_probe: prepare_singlestep(p, regs); - kprobe_status = KPROBE_HIT_SS; + kcb->kprobe_status = KPROBE_HIT_SS; return 1; no_kprobe: @@ -269,9 +265,10 @@ int __kprobes trampoline_probe_handler(struct kprobe *p, struct pt_regs *regs) struct kretprobe_instance *ri = NULL; struct hlist_head *head; struct hlist_node *node, *tmp; - unsigned long orig_ret_address = 0; + unsigned long flags, orig_ret_address = 0; unsigned long trampoline_address =(unsigned long)&kretprobe_trampoline; + spin_lock_irqsave(&kretprobe_lock, flags); head = kretprobe_inst_table_head(current); /* @@ -310,14 +307,15 @@ int __kprobes trampoline_probe_handler(struct kprobe *p, struct pt_regs *regs) BUG_ON(!orig_ret_address || (orig_ret_address == trampoline_address)); regs->eip = orig_ret_address; - unlock_kprobes(); + reset_current_kprobe(); + spin_unlock_irqrestore(&kretprobe_lock, flags); preempt_enable_no_resched(); - /* - * By returning a non-zero value, we are telling - * kprobe_handler() that we have handled unlocking - * and re-enabling preemption. - */ + /* + * By returning a non-zero value, we are telling + * kprobe_handler() that we don't want the post_handler + * to run (and have re-enabled preemption) + */ return 1; } @@ -343,7 +341,8 @@ int __kprobes trampoline_probe_handler(struct kprobe *p, struct pt_regs *regs) * that is atop the stack is the address following the copied instruction. * We need to make it the address following the original instruction. */ -static void __kprobes resume_execution(struct kprobe *p, struct pt_regs *regs) +static void __kprobes resume_execution(struct kprobe *p, + struct pt_regs *regs, struct kprobe_ctlblk *kcb) { unsigned long *tos = (unsigned long *)®s->esp; unsigned long next_eip = 0; @@ -353,7 +352,7 @@ static void __kprobes resume_execution(struct kprobe *p, struct pt_regs *regs) switch (p->ainsn.insn[0]) { case 0x9c: /* pushfl */ *tos &= ~(TF_MASK | IF_MASK); - *tos |= kprobe_old_eflags; + *tos |= kcb->kprobe_old_eflags; break; case 0xc3: /* ret/lret */ case 0xcb: @@ -394,27 +393,30 @@ static void __kprobes resume_execution(struct kprobe *p, struct pt_regs *regs) /* * Interrupts are disabled on entry as trap1 is an interrupt gate and they - * remain disabled thoroughout this function. And we hold kprobe lock. + * remain disabled thoroughout this function. */ static inline int post_kprobe_handler(struct pt_regs *regs) { - if (!kprobe_running()) + struct kprobe *cur = kprobe_running(); + struct kprobe_ctlblk *kcb = get_kprobe_ctlblk(); + + if (!cur) return 0; - if ((kprobe_status != KPROBE_REENTER) && current_kprobe->post_handler) { - kprobe_status = KPROBE_HIT_SSDONE; - current_kprobe->post_handler(current_kprobe, regs, 0); + if ((kcb->kprobe_status != KPROBE_REENTER) && cur->post_handler) { + kcb->kprobe_status = KPROBE_HIT_SSDONE; + cur->post_handler(cur, regs, 0); } - resume_execution(current_kprobe, regs); - regs->eflags |= kprobe_saved_eflags; + resume_execution(cur, regs, kcb); + regs->eflags |= kcb->kprobe_saved_eflags; /*Restore back the original saved kprobes variables and continue. */ - if (kprobe_status == KPROBE_REENTER) { - restore_previous_kprobe(); + if (kcb->kprobe_status == KPROBE_REENTER) { + restore_previous_kprobe(kcb); goto out; } - unlock_kprobes(); + reset_current_kprobe(); out: preempt_enable_no_resched(); @@ -429,18 +431,19 @@ out: return 1; } -/* Interrupts disabled, kprobe_lock held. */ static inline int kprobe_fault_handler(struct pt_regs *regs, int trapnr) { - if (current_kprobe->fault_handler - && current_kprobe->fault_handler(current_kprobe, regs, trapnr)) + struct kprobe *cur = kprobe_running(); + struct kprobe_ctlblk *kcb = get_kprobe_ctlblk(); + + if (cur->fault_handler && cur->fault_handler(cur, regs, trapnr)) return 1; - if (kprobe_status & KPROBE_HIT_SS) { - resume_execution(current_kprobe, regs); - regs->eflags |= kprobe_old_eflags; + if (kcb->kprobe_status & KPROBE_HIT_SS) { + resume_execution(cur, regs, kcb); + regs->eflags |= kcb->kprobe_old_eflags; - unlock_kprobes(); + reset_current_kprobe(); preempt_enable_no_resched(); } return 0; @@ -453,39 +456,41 @@ int __kprobes kprobe_exceptions_notify(struct notifier_block *self, unsigned long val, void *data) { struct die_args *args = (struct die_args *)data; + int ret = NOTIFY_DONE; + switch (val) { case DIE_INT3: if (kprobe_handler(args->regs)) - return NOTIFY_STOP; + ret = NOTIFY_STOP; break; case DIE_DEBUG: if (post_kprobe_handler(args->regs)) - return NOTIFY_STOP; + ret = NOTIFY_STOP; break; case DIE_GPF: - if (kprobe_running() && - kprobe_fault_handler(args->regs, args->trapnr)) - return NOTIFY_STOP; - break; case DIE_PAGE_FAULT: + /* kprobe_running() needs smp_processor_id() */ + preempt_disable(); if (kprobe_running() && kprobe_fault_handler(args->regs, args->trapnr)) - return NOTIFY_STOP; + ret = NOTIFY_STOP; + preempt_enable(); break; default: break; } - return NOTIFY_DONE; + return ret; } int __kprobes setjmp_pre_handler(struct kprobe *p, struct pt_regs *regs) { struct jprobe *jp = container_of(p, struct jprobe, kp); unsigned long addr; + struct kprobe_ctlblk *kcb = get_kprobe_ctlblk(); - jprobe_saved_regs = *regs; - jprobe_saved_esp = ®s->esp; - addr = (unsigned long)jprobe_saved_esp; + kcb->jprobe_saved_regs = *regs; + kcb->jprobe_saved_esp = ®s->esp; + addr = (unsigned long)(kcb->jprobe_saved_esp); /* * TBD: As Linus pointed out, gcc assumes that the callee @@ -494,7 +499,8 @@ int __kprobes setjmp_pre_handler(struct kprobe *p, struct pt_regs *regs) * we also save and restore enough stack bytes to cover * the argument area. */ - memcpy(jprobes_stack, (kprobe_opcode_t *) addr, MIN_STACK_SIZE(addr)); + memcpy(kcb->jprobes_stack, (kprobe_opcode_t *)addr, + MIN_STACK_SIZE(addr)); regs->eflags &= ~IF_MASK; regs->eip = (unsigned long)(jp->entry); return 1; @@ -502,36 +508,40 @@ int __kprobes setjmp_pre_handler(struct kprobe *p, struct pt_regs *regs) void __kprobes jprobe_return(void) { - preempt_enable_no_resched(); + struct kprobe_ctlblk *kcb = get_kprobe_ctlblk(); + asm volatile (" xchgl %%ebx,%%esp \n" " int3 \n" " .globl jprobe_return_end \n" " jprobe_return_end: \n" " nop \n"::"b" - (jprobe_saved_esp):"memory"); + (kcb->jprobe_saved_esp):"memory"); } int __kprobes longjmp_break_handler(struct kprobe *p, struct pt_regs *regs) { + struct kprobe_ctlblk *kcb = get_kprobe_ctlblk(); u8 *addr = (u8 *) (regs->eip - 1); - unsigned long stack_addr = (unsigned long)jprobe_saved_esp; + unsigned long stack_addr = (unsigned long)(kcb->jprobe_saved_esp); struct jprobe *jp = container_of(p, struct jprobe, kp); if ((addr > (u8 *) jprobe_return) && (addr < (u8 *) jprobe_return_end)) { - if (®s->esp != jprobe_saved_esp) { + if (®s->esp != kcb->jprobe_saved_esp) { struct pt_regs *saved_regs = - container_of(jprobe_saved_esp, struct pt_regs, esp); + container_of(kcb->jprobe_saved_esp, + struct pt_regs, esp); printk("current esp %p does not match saved esp %p\n", - ®s->esp, jprobe_saved_esp); + ®s->esp, kcb->jprobe_saved_esp); printk("Saved registers for jprobe %p\n", jp); show_registers(saved_regs); printk("Current registers\n"); show_registers(regs); BUG(); } - *regs = jprobe_saved_regs; - memcpy((kprobe_opcode_t *) stack_addr, jprobes_stack, + *regs = kcb->jprobe_saved_regs; + memcpy((kprobe_opcode_t *) stack_addr, kcb->jprobes_stack, MIN_STACK_SIZE(stack_addr)); + preempt_enable_no_resched(); return 1; } return 0; diff --git a/arch/i386/kernel/ldt.c b/arch/i386/kernel/ldt.c index fe1ffa55587..983f95707e1 100644 --- a/arch/i386/kernel/ldt.c +++ b/arch/i386/kernel/ldt.c @@ -18,6 +18,7 @@ #include <asm/system.h> #include <asm/ldt.h> #include <asm/desc.h> +#include <asm/mmu_context.h> #ifdef CONFIG_SMP /* avoids "defined but not used" warnig */ static void flush_ldt(void *null) diff --git a/arch/i386/kernel/mca.c b/arch/i386/kernel/mca.c index 8600faeea29..558bb207720 100644 --- a/arch/i386/kernel/mca.c +++ b/arch/i386/kernel/mca.c @@ -132,7 +132,7 @@ static struct resource mca_standard_resources[] = { { .start = 0x100, .end = 0x107, .name = "POS (MCA)" } }; -#define MCA_STANDARD_RESOURCES (sizeof(mca_standard_resources)/sizeof(struct resource)) +#define MCA_STANDARD_RESOURCES ARRAY_SIZE(mca_standard_resources) /** * mca_read_and_store_pos - read the POS registers into a memory buffer diff --git a/arch/i386/kernel/ptrace.c b/arch/i386/kernel/ptrace.c index efd11f09c99..5ffbb4b7ad0 100644 --- a/arch/i386/kernel/ptrace.c +++ b/arch/i386/kernel/ptrace.c @@ -354,49 +354,12 @@ ptrace_set_thread_area(struct task_struct *child, return 0; } -asmlinkage long sys_ptrace(long request, long pid, long addr, long data) +long arch_ptrace(struct task_struct *child, long request, long addr, long data) { - struct task_struct *child; struct user * dummy = NULL; int i, ret; unsigned long __user *datap = (unsigned long __user *)data; - lock_kernel(); - ret = -EPERM; - if (request == PTRACE_TRACEME) { - /* are we already being traced? */ - if (current->ptrace & PT_PTRACED) - goto out; - ret = security_ptrace(current->parent, current); - if (ret) - goto out; - /* set the ptrace bit in the process flags. */ - current->ptrace |= PT_PTRACED; - ret = 0; - goto out; - } - ret = -ESRCH; - read_lock(&tasklist_lock); - child = find_task_by_pid(pid); - if (child) - get_task_struct(child); - read_unlock(&tasklist_lock); - if (!child) - goto out; - - ret = -EPERM; - if (pid == 1) /* you may not mess with init */ - goto out_tsk; - - if (request == PTRACE_ATTACH) { - ret = ptrace_attach(child); - goto out_tsk; - } - - ret = ptrace_check_attach(child, request == PTRACE_KILL); - if (ret < 0) - goto out_tsk; - switch (request) { /* when I and D space are separate, these will need to be fixed. */ case PTRACE_PEEKTEXT: /* read word at location addr. */ @@ -663,10 +626,7 @@ asmlinkage long sys_ptrace(long request, long pid, long addr, long data) ret = ptrace_request(child, request, addr, data); break; } -out_tsk: - put_task_struct(child); -out: - unlock_kernel(); + out_tsk: return ret; } diff --git a/arch/i386/kernel/reboot_fixups.c b/arch/i386/kernel/reboot_fixups.c index c9b87330aee..10e21a4773d 100644 --- a/arch/i386/kernel/reboot_fixups.c +++ b/arch/i386/kernel/reboot_fixups.c @@ -10,6 +10,7 @@ #include <asm/delay.h> #include <linux/pci.h> +#include <linux/reboot_fixups.h> static void cs5530a_warm_reset(struct pci_dev *dev) { @@ -42,7 +43,7 @@ void mach_reboot_fixups(void) struct pci_dev *dev; int i; - for (i=0; i < (sizeof(fixups_table)/sizeof(fixups_table[0])); i++) { + for (i=0; i < ARRAY_SIZE(fixups_table); i++) { cur = &(fixups_table[i]); dev = pci_get_device(cur->vendor, cur->device, NULL); if (!dev) diff --git a/arch/i386/kernel/scx200.c b/arch/i386/kernel/scx200.c index 69e203a0d33..9c968ae67c4 100644 --- a/arch/i386/kernel/scx200.c +++ b/arch/i386/kernel/scx200.c @@ -12,6 +12,7 @@ #include <linux/pci.h> #include <linux/scx200.h> +#include <linux/scx200_gpio.h> /* Verify that the configuration block really is there */ #define scx200_cb_probe(base) (inw((base) + SCx200_CBA) == (base)) diff --git a/arch/i386/kernel/smpboot.c b/arch/i386/kernel/smpboot.c index 01b618e73ec..47ec76794d0 100644 --- a/arch/i386/kernel/smpboot.c +++ b/arch/i386/kernel/smpboot.c @@ -68,11 +68,9 @@ EXPORT_SYMBOL(smp_num_siblings); /* Package ID of each logical CPU */ int phys_proc_id[NR_CPUS] __read_mostly = {[0 ... NR_CPUS-1] = BAD_APICID}; -EXPORT_SYMBOL(phys_proc_id); /* Core ID of each logical CPU */ int cpu_core_id[NR_CPUS] __read_mostly = {[0 ... NR_CPUS-1] = BAD_APICID}; -EXPORT_SYMBOL(cpu_core_id); cpumask_t cpu_sibling_map[NR_CPUS] __read_mostly; EXPORT_SYMBOL(cpu_sibling_map); @@ -612,7 +610,7 @@ static inline void __inquire_remote_apic(int apicid) printk("Inquiring remote APIC #%d...\n", apicid); - for (i = 0; i < sizeof(regs) / sizeof(*regs); i++) { + for (i = 0; i < ARRAY_SIZE(regs); i++) { printk("... APIC #%d %s: ", apicid, names[i]); /* diff --git a/arch/i386/oprofile/Kconfig b/arch/i386/oprofile/Kconfig index 5ade19801b9..d8a84088471 100644 --- a/arch/i386/oprofile/Kconfig +++ b/arch/i386/oprofile/Kconfig @@ -1,7 +1,3 @@ - -menu "Profiling support" - depends on EXPERIMENTAL - config PROFILING bool "Profiling support (EXPERIMENTAL)" help @@ -19,5 +15,3 @@ config OPROFILE If unsure, say N. -endmenu - diff --git a/arch/i386/power/cpu.c b/arch/i386/power/cpu.c index 1f1572692e0..50a0bef8c85 100644 --- a/arch/i386/power/cpu.c +++ b/arch/i386/power/cpu.c @@ -118,6 +118,7 @@ void __restore_processor_state(struct saved_context *ctxt) fix_processor_context(); do_fpu_end(); mtrr_ap_init(); + mcheck_init(&boot_cpu_data); } void restore_processor_state(void) diff --git a/arch/ia64/Kconfig b/arch/ia64/Kconfig index 3b4248cff9a..d4de8a4814b 100644 --- a/arch/ia64/Kconfig +++ b/arch/ia64/Kconfig @@ -191,6 +191,7 @@ config IOSAPIC config IA64_SGI_SN_XP tristate "Support communication between SGI SSIs" + depends on IA64_GENERIC || IA64_SGI_SN2 select IA64_UNCACHED_ALLOCATOR help An SGI machine can be divided into multiple Single System @@ -426,8 +427,21 @@ config GENERIC_PENDING_IRQ source "arch/ia64/hp/sim/Kconfig" +menu "Instrumentation Support" + depends on EXPERIMENTAL + source "arch/ia64/oprofile/Kconfig" +config KPROBES + bool "Kprobes (EXPERIMENTAL)" + help + Kprobes allows you to trap at almost any kernel address and + execute a callback function. register_kprobe() establishes + a probepoint and specifies the callback. Kprobes is useful + for kernel debugging, non-intrusive instrumentation and testing. + If in doubt, say "N". +endmenu + source "arch/ia64/Kconfig.debug" source "security/Kconfig" diff --git a/arch/ia64/Kconfig.debug b/arch/ia64/Kconfig.debug index fda67ac993d..de9d507ba0f 100644 --- a/arch/ia64/Kconfig.debug +++ b/arch/ia64/Kconfig.debug @@ -2,17 +2,6 @@ menu "Kernel hacking" source "lib/Kconfig.debug" -config KPROBES - bool "Kprobes" - depends on DEBUG_KERNEL - help - Kprobes allows you to trap at almost any kernel address and - execute a callback function. register_kprobe() establishes - a probepoint and specifies the callback. Kprobes is useful - for kernel debugging, non-intrusive instrumentation and testing. - If in doubt, say "N". - - choice prompt "Physical memory granularity" default IA64_GRANULE_64MB diff --git a/arch/ia64/hp/sim/simserial.c b/arch/ia64/hp/sim/simserial.c index b42ec37be51..19ee635eeb7 100644 --- a/arch/ia64/hp/sim/simserial.c +++ b/arch/ia64/hp/sim/simserial.c @@ -642,10 +642,8 @@ static void rs_close(struct tty_struct *tty, struct file * filp) info->event = 0; info->tty = 0; if (info->blocked_open) { - if (info->close_delay) { - current->state = TASK_INTERRUPTIBLE; - schedule_timeout(info->close_delay); - } + if (info->close_delay) + schedule_timeout_interruptible(info->close_delay); wake_up_interruptible(&info->open_wait); } info->flags &= ~(ASYNC_NORMAL_ACTIVE|ASYNC_CLOSING); diff --git a/arch/ia64/kernel/kprobes.c b/arch/ia64/kernel/kprobes.c index 471086b808a..96736a119c9 100644 --- a/arch/ia64/kernel/kprobes.c +++ b/arch/ia64/kernel/kprobes.c @@ -26,7 +26,6 @@ #include <linux/config.h> #include <linux/kprobes.h> #include <linux/ptrace.h> -#include <linux/spinlock.h> #include <linux/string.h> #include <linux/slab.h> #include <linux/preempt.h> @@ -38,13 +37,8 @@ extern void jprobe_inst_return(void); -/* kprobe_status settings */ -#define KPROBE_HIT_ACTIVE 0x00000001 -#define KPROBE_HIT_SS 0x00000002 - -static struct kprobe *current_kprobe, *kprobe_prev; -static unsigned long kprobe_status, kprobe_status_prev; -static struct pt_regs jprobe_saved_regs; +DEFINE_PER_CPU(struct kprobe *, current_kprobe) = NULL; +DEFINE_PER_CPU(struct kprobe_ctlblk, kprobe_ctlblk); enum instruction_type {A, I, M, F, B, L, X, u}; static enum instruction_type bundle_encoding[32][3] = { @@ -313,21 +307,22 @@ static int __kprobes valid_kprobe_addr(int template, int slot, return 0; } -static inline void save_previous_kprobe(void) +static inline void save_previous_kprobe(struct kprobe_ctlblk *kcb) { - kprobe_prev = current_kprobe; - kprobe_status_prev = kprobe_status; + kcb->prev_kprobe.kp = kprobe_running(); + kcb->prev_kprobe.status = kcb->kprobe_status; } -static inline void restore_previous_kprobe(void) +static inline void restore_previous_kprobe(struct kprobe_ctlblk *kcb) { - current_kprobe = kprobe_prev; - kprobe_status = kprobe_status_prev; + __get_cpu_var(current_kprobe) = kcb->prev_kprobe.kp; + kcb->kprobe_status = kcb->prev_kprobe.status; } -static inline void set_current_kprobe(struct kprobe *p) +static inline void set_current_kprobe(struct kprobe *p, + struct kprobe_ctlblk *kcb) { - current_kprobe = p; + __get_cpu_var(current_kprobe) = p; } static void kretprobe_trampoline(void) @@ -347,10 +342,11 @@ int __kprobes trampoline_probe_handler(struct kprobe *p, struct pt_regs *regs) struct kretprobe_instance *ri = NULL; struct hlist_head *head; struct hlist_node *node, *tmp; - unsigned long orig_ret_address = 0; + unsigned long flags, orig_ret_address = 0; unsigned long trampoline_address = ((struct fnptr *)kretprobe_trampoline)->ip; + spin_lock_irqsave(&kretprobe_lock, flags); head = kretprobe_inst_table_head(current); /* @@ -389,17 +385,19 @@ int __kprobes trampoline_probe_handler(struct kprobe *p, struct pt_regs *regs) BUG_ON(!orig_ret_address || (orig_ret_address == trampoline_address)); regs->cr_iip = orig_ret_address; - unlock_kprobes(); + reset_current_kprobe(); + spin_unlock_irqrestore(&kretprobe_lock, flags); preempt_enable_no_resched(); - /* - * By returning a non-zero value, we are telling - * kprobe_handler() that we have handled unlocking - * and re-enabling preemption. - */ + /* + * By returning a non-zero value, we are telling + * kprobe_handler() that we don't want the post_handler + * to run (and have re-enabled preemption) + */ return 1; } +/* Called with kretprobe_lock held */ void __kprobes arch_prepare_kretprobe(struct kretprobe *rp, struct pt_regs *regs) { @@ -606,17 +604,22 @@ static int __kprobes pre_kprobes_handler(struct die_args *args) int ret = 0; struct pt_regs *regs = args->regs; kprobe_opcode_t *addr = (kprobe_opcode_t *)instruction_pointer(regs); + struct kprobe_ctlblk *kcb; + /* + * We don't want to be preempted for the entire + * duration of kprobe processing + */ preempt_disable(); + kcb = get_kprobe_ctlblk(); /* Handle recursion cases */ if (kprobe_running()) { p = get_kprobe(addr); if (p) { - if ( (kprobe_status == KPROBE_HIT_SS) && + if ((kcb->kprobe_status == KPROBE_HIT_SS) && (p->ainsn.inst_flag == INST_FLAG_BREAK_INST)) { ia64_psr(regs)->ss = 0; - unlock_kprobes(); goto no_kprobe; } /* We have reentered the pre_kprobe_handler(), since @@ -625,17 +628,17 @@ static int __kprobes pre_kprobes_handler(struct die_args *args) * just single step on the instruction of the new probe * without calling any user handlers. */ - save_previous_kprobe(); - set_current_kprobe(p); + save_previous_kprobe(kcb); + set_current_kprobe(p, kcb); p->nmissed++; prepare_ss(p, regs); - kprobe_status = KPROBE_REENTER; + kcb->kprobe_status = KPROBE_REENTER; return 1; } else if (args->err == __IA64_BREAK_JPROBE) { /* * jprobe instrumented function just completed */ - p = current_kprobe; + p = __get_cpu_var(current_kprobe); if (p->break_handler && p->break_handler(p, regs)) { goto ss_probe; } @@ -645,10 +648,8 @@ static int __kprobes pre_kprobes_handler(struct die_args *args) } } - lock_kprobes(); p = get_kprobe(addr); if (!p) { - unlock_kprobes(); if (!is_ia64_break_inst(regs)) { /* * The breakpoint instruction was removed right @@ -665,8 +666,8 @@ static int __kprobes pre_kprobes_handler(struct die_args *args) goto no_kprobe; } - kprobe_status = KPROBE_HIT_ACTIVE; - set_current_kprobe(p); + set_current_kprobe(p, kcb); + kcb->kprobe_status = KPROBE_HIT_ACTIVE; if (p->pre_handler && p->pre_handler(p, regs)) /* @@ -678,7 +679,7 @@ static int __kprobes pre_kprobes_handler(struct die_args *args) ss_probe: prepare_ss(p, regs); - kprobe_status = KPROBE_HIT_SS; + kcb->kprobe_status = KPROBE_HIT_SS; return 1; no_kprobe: @@ -688,23 +689,25 @@ no_kprobe: static int __kprobes post_kprobes_handler(struct pt_regs *regs) { - if (!kprobe_running()) + struct kprobe *cur = kprobe_running(); + struct kprobe_ctlblk *kcb = get_kprobe_ctlblk(); + + if (!cur) return 0; - if ((kprobe_status != KPROBE_REENTER) && current_kprobe->post_handler) { - kprobe_status = KPROBE_HIT_SSDONE; - current_kprobe->post_handler(current_kprobe, regs, 0); + if ((kcb->kprobe_status != KPROBE_REENTER) && cur->post_handler) { + kcb->kprobe_status = KPROBE_HIT_SSDONE; + cur->post_handler(cur, regs, 0); } - resume_execution(current_kprobe, regs); + resume_execution(cur, regs); /*Restore back the original saved kprobes variables and continue. */ - if (kprobe_status == KPROBE_REENTER) { - restore_previous_kprobe(); + if (kcb->kprobe_status == KPROBE_REENTER) { + restore_previous_kprobe(kcb); goto out; } - - unlock_kprobes(); + reset_current_kprobe(); out: preempt_enable_no_resched(); @@ -713,16 +716,15 @@ out: static int __kprobes kprobes_fault_handler(struct pt_regs *regs, int trapnr) { - if (!kprobe_running()) - return 0; + struct kprobe *cur = kprobe_running(); + struct kprobe_ctlblk *kcb = get_kprobe_ctlblk(); - if (current_kprobe->fault_handler && - current_kprobe->fault_handler(current_kprobe, regs, trapnr)) + if (cur->fault_handler && cur->fault_handler(cur, regs, trapnr)) return 1; - if (kprobe_status & KPROBE_HIT_SS) { - resume_execution(current_kprobe, regs); - unlock_kprobes(); + if (kcb->kprobe_status & KPROBE_HIT_SS) { + resume_execution(cur, regs); + reset_current_kprobe(); preempt_enable_no_resched(); } @@ -733,31 +735,38 @@ int __kprobes kprobe_exceptions_notify(struct notifier_block *self, unsigned long val, void *data) { struct die_args *args = (struct die_args *)data; + int ret = NOTIFY_DONE; + switch(val) { case DIE_BREAK: if (pre_kprobes_handler(args)) - return NOTIFY_STOP; + ret = NOTIFY_STOP; break; case DIE_SS: if (post_kprobes_handler(args->regs)) - return NOTIFY_STOP; + ret = NOTIFY_STOP; break; case DIE_PAGE_FAULT: - if (kprobes_fault_handler(args->regs, args->trapnr)) - return NOTIFY_STOP; + /* kprobe_running() needs smp_processor_id() */ + preempt_disable(); + if (kprobe_running() && + kprobes_fault_handler(args->regs, args->trapnr)) + ret = NOTIFY_STOP; + preempt_enable(); default: break; } - return NOTIFY_DONE; + return ret; } int __kprobes setjmp_pre_handler(struct kprobe *p, struct pt_regs *regs) { struct jprobe *jp = container_of(p, struct jprobe, kp); unsigned long addr = ((struct fnptr *)(jp->entry))->ip; + struct kprobe_ctlblk *kcb = get_kprobe_ctlblk(); /* save architectural state */ - jprobe_saved_regs = *regs; + kcb->jprobe_saved_regs = *regs; /* after rfi, execute the jprobe instrumented function */ regs->cr_iip = addr & ~0xFULL; @@ -775,7 +784,10 @@ int __kprobes setjmp_pre_handler(struct kprobe *p, struct pt_regs *regs) int __kprobes longjmp_break_handler(struct kprobe *p, struct pt_regs *regs) { - *regs = jprobe_saved_regs; + struct kprobe_ctlblk *kcb = get_kprobe_ctlblk(); + + *regs = kcb->jprobe_saved_regs; + preempt_enable_no_resched(); return 1; } diff --git a/arch/ia64/kernel/perfmon.c b/arch/ia64/kernel/perfmon.c index f7dfc107cb7..410d4804fa6 100644 --- a/arch/ia64/kernel/perfmon.c +++ b/arch/ia64/kernel/perfmon.c @@ -4940,7 +4940,7 @@ abort_locked: if (call_made && PFM_CMD_RW_ARG(cmd) && copy_to_user(arg, args_k, base_sz*count)) ret = -EFAULT; error_args: - if (args_k) kfree(args_k); + kfree(args_k); DPRINT(("cmd=%s ret=%ld\n", PFM_CMD_NAME(cmd), ret)); diff --git a/arch/ia64/kernel/setup.c b/arch/ia64/kernel/setup.c index fc56ca2da35..3af6de36a48 100644 --- a/arch/ia64/kernel/setup.c +++ b/arch/ia64/kernel/setup.c @@ -92,6 +92,13 @@ extern void efi_initialize_iomem_resources(struct resource *, extern char _text[], _end[], _etext[]; unsigned long ia64_max_cacheline_size; + +int dma_get_cache_alignment(void) +{ + return ia64_max_cacheline_size; +} +EXPORT_SYMBOL(dma_get_cache_alignment); + unsigned long ia64_iobase; /* virtual address for I/O accesses */ EXPORT_SYMBOL(ia64_iobase); struct io_space io_space[MAX_IO_SPACES]; diff --git a/arch/ia64/oprofile/Kconfig b/arch/ia64/oprofile/Kconfig index 56e6f614b04..97271ab484d 100644 --- a/arch/ia64/oprofile/Kconfig +++ b/arch/ia64/oprofile/Kconfig @@ -1,7 +1,3 @@ - -menu "Profiling support" - depends on EXPERIMENTAL - config PROFILING bool "Profiling support (EXPERIMENTAL)" help @@ -22,5 +18,3 @@ config OPROFILE If unsure, say N. -endmenu - diff --git a/arch/m68k/atari/time.c b/arch/m68k/atari/time.c index 6df7fb60dfe..e79bbc94216 100644 --- a/arch/m68k/atari/time.c +++ b/arch/m68k/atari/time.c @@ -212,10 +212,8 @@ int atari_tt_hwclk( int op, struct rtc_time *t ) * additionally the RTC_SET bit is set to prevent an update cycle. */ - while( RTC_READ(RTC_FREQ_SELECT) & RTC_UIP ) { - current->state = TASK_INTERRUPTIBLE; - schedule_timeout(HWCLK_POLL_INTERVAL); - } + while( RTC_READ(RTC_FREQ_SELECT) & RTC_UIP ) + schedule_timeout_interruptible(HWCLK_POLL_INTERVAL); local_irq_save(flags); RTC_WRITE( RTC_CONTROL, ctrl | RTC_SET ); diff --git a/arch/m68k/kernel/ptrace.c b/arch/m68k/kernel/ptrace.c index f7f1d2e5b90..7e54422685c 100644 --- a/arch/m68k/kernel/ptrace.c +++ b/arch/m68k/kernel/ptrace.c @@ -121,48 +121,11 @@ void ptrace_disable(struct task_struct *child) child->thread.work.syscall_trace = 0; } -asmlinkage long sys_ptrace(long request, long pid, long addr, long data) +long arch_ptrace(struct task_struct *child, long request, long addr, long data) { - struct task_struct *child; unsigned long tmp; int i, ret = 0; - lock_kernel(); - if (request == PTRACE_TRACEME) { - /* are we already being traced? */ - if (current->ptrace & PT_PTRACED) { - ret = -EPERM; - goto out; - } - /* set the ptrace bit in the process flags. */ - current->ptrace |= PT_PTRACED; - goto out; - } - read_lock(&tasklist_lock); - child = find_task_by_pid(pid); - if (child) - get_task_struct(child); - read_unlock(&tasklist_lock); - if (unlikely(!child)) { - ret = -ESRCH; - goto out; - } - - /* you may not mess with init */ - if (unlikely(pid == 1)) { - ret = -EPERM; - goto out_tsk; - } - - if (request == PTRACE_ATTACH) { - ret = ptrace_attach(child); - goto out_tsk; - } - - ret = ptrace_check_attach(child, request == PTRACE_KILL); - if (ret) - goto out_tsk; - switch (request) { /* when I and D space are separate, these will need to be fixed. */ case PTRACE_PEEKTEXT: /* read word at location addr. */ @@ -317,14 +280,10 @@ asmlinkage long sys_ptrace(long request, long pid, long addr, long data) ret = ptrace_request(child, request, addr, data); break; } -out_tsk: - put_task_struct(child); -out: - unlock_kernel(); + return ret; out_eio: - ret = -EIO; - goto out_tsk; + return -EIO; } asmlinkage void syscall_trace(void) diff --git a/arch/m68knommu/Kconfig b/arch/m68knommu/Kconfig index 8520df9cee6..b96498120fe 100644 --- a/arch/m68knommu/Kconfig +++ b/arch/m68knommu/Kconfig @@ -71,6 +71,11 @@ config M5206e help Motorola ColdFire 5206e processor support. +config M520x + bool "MCF520x" + help + Freescale Coldfire 5207/5208 processor support. + config M523x bool "MCF523x" help @@ -120,7 +125,7 @@ config M527x config COLDFIRE bool - depends on (M5206 || M5206e || M523x || M5249 || M527x || M5272 || M528x || M5307 || M5407) + depends on (M5206 || M5206e || M520x || M523x || M5249 || M527x || M5272 || M528x || M5307 || M5407) default y choice @@ -322,6 +327,12 @@ config ELITE help Support for the Motorola M5206eLITE board. +config M5208EVB + bool "Freescale M5208EVB board support" + depends on M520x + help + Support for the Freescale Coldfire M5208EVB. + config M5235EVB bool "Freescale M5235EVB support" depends on M523x @@ -465,10 +476,10 @@ config ARNEWSH default y depends on (ARN5206 || ARN5307) -config MOTOROLA +config FREESCALE bool default y - depends on (M5206eC3 || M5235EVB || M5249C3 || M5271EVB || M5272C3 || M5275EVB || M5282EVB || M5307C3 || M5407C3) + depends on (M5206eC3 || M5208EVB || M5235EVB || M5249C3 || M5271EVB || M5272C3 || M5275EVB || M5282EVB || M5307C3 || M5407C3) config HW_FEITH bool diff --git a/arch/m68knommu/Makefile b/arch/m68knommu/Makefile index b8fdf191b8f..b6b5c14e55f 100644 --- a/arch/m68knommu/Makefile +++ b/arch/m68knommu/Makefile @@ -14,6 +14,7 @@ platform-$(CONFIG_M68VZ328) := 68VZ328 platform-$(CONFIG_M68360) := 68360 platform-$(CONFIG_M5206) := 5206 platform-$(CONFIG_M5206e) := 5206e +platform-$(CONFIG_M520x) := 520x platform-$(CONFIG_M523x) := 523x platform-$(CONFIG_M5249) := 5249 platform-$(CONFIG_M527x) := 527x @@ -29,7 +30,7 @@ board-$(CONFIG_UCDIMM) := ucdimm board-$(CONFIG_UCQUICC) := uCquicc board-$(CONFIG_DRAGEN2) := de2 board-$(CONFIG_ARNEWSH) := ARNEWSH -board-$(CONFIG_MOTOROLA) := MOTOROLA +board-$(CONFIG_FREESCALE) := FREESCALE board-$(CONFIG_M5235EVB) := M5235EVB board-$(CONFIG_M5271EVB) := M5271EVB board-$(CONFIG_M5275EVB) := M5275EVB @@ -41,6 +42,7 @@ board-$(CONFIG_SECUREEDGEMP3) := MP3 board-$(CONFIG_CLEOPATRA) := CLEOPATRA board-$(CONFIG_senTec) := senTec board-$(CONFIG_SNEHA) := SNEHA +board-$(CONFIG_M5208EVB) := M5208EVB board-$(CONFIG_MOD5272) := MOD5272 BOARD := $(board-y) @@ -56,6 +58,7 @@ MODEL := $(model-y) # cpuclass-$(CONFIG_M5206) := 5307 cpuclass-$(CONFIG_M5206e) := 5307 +cpuclass-$(CONFIG_M520x) := 5307 cpuclass-$(CONFIG_M523x) := 5307 cpuclass-$(CONFIG_M5249) := 5307 cpuclass-$(CONFIG_M527x) := 5307 @@ -80,6 +83,7 @@ export PLATFORM BOARD MODEL CPUCLASS # cflags-$(CONFIG_M5206) := -m5200 -Wa,-S -Wa,-m5200 cflags-$(CONFIG_M5206e) := -m5200 -Wa,-S -Wa,-m5200 +cflags-$(CONFIG_M520x) := -m5307 -Wa,-S -Wa,-m5307 cflags-$(CONFIG_M523x) := -m5307 -Wa,-S -Wa,-m5307 cflags-$(CONFIG_M5249) := -m5200 -Wa,-S -Wa,-m5200 cflags-$(CONFIG_M527x) := -m5307 -Wa,-S -Wa,-m5307 @@ -95,7 +99,6 @@ cflags-$(CONFIG_M68360) := -m68332 AFLAGS += $(cflags-y) CFLAGS += $(cflags-y) -CFLAGS += -fno-builtin CFLAGS += -O1 -g CFLAGS += -D__linux__ CFLAGS += -DUTS_SYSNAME=\"uClinux\" diff --git a/arch/m68knommu/kernel/asm-offsets.c b/arch/m68knommu/kernel/asm-offsets.c index cd3ffe12653..b988c7bdc6e 100644 --- a/arch/m68knommu/kernel/asm-offsets.c +++ b/arch/m68knommu/kernel/asm-offsets.c @@ -15,6 +15,7 @@ #include <linux/hardirq.h> #include <asm/bootinfo.h> #include <asm/irq.h> +#include <asm/irqnode.h> #include <asm/thread_info.h> #define DEFINE(sym, val) \ diff --git a/arch/m68knommu/kernel/ptrace.c b/arch/m68knommu/kernel/ptrace.c index 621d7b91ccf..262ab8c72e5 100644 --- a/arch/m68knommu/kernel/ptrace.c +++ b/arch/m68knommu/kernel/ptrace.c @@ -101,43 +101,10 @@ void ptrace_disable(struct task_struct *child) put_reg(child, PT_SR, tmp); } -asmlinkage long sys_ptrace(long request, long pid, long addr, long data) +long arch_ptrace(truct task_struct *child, long request, long addr, long data) { - struct task_struct *child; int ret; - lock_kernel(); - ret = -EPERM; - if (request == PTRACE_TRACEME) { - /* are we already being traced? */ - if (current->ptrace & PT_PTRACED) - goto out; - /* set the ptrace bit in the process flags. */ - current->ptrace |= PT_PTRACED; - ret = 0; - goto out; - } - ret = -ESRCH; - read_lock(&tasklist_lock); - child = find_task_by_pid(pid); - if (child) - get_task_struct(child); - read_unlock(&tasklist_lock); - if (!child) - goto out; - - ret = -EPERM; - if (pid == 1) /* you may not mess with init */ - goto out_tsk; - - if (request == PTRACE_ATTACH) { - ret = ptrace_attach(child); - goto out_tsk; - } - ret = ptrace_check_attach(child, request == PTRACE_KILL); - if (ret < 0) - goto out_tsk; - switch (request) { /* when I and D space are separate, these will need to be fixed. */ case PTRACE_PEEKTEXT: /* read word at location addr. */ @@ -357,10 +324,6 @@ asmlinkage long sys_ptrace(long request, long pid, long addr, long data) ret = -EIO; break; } -out_tsk: - put_task_struct(child); -out: - unlock_kernel(); return ret; } diff --git a/arch/m68knommu/kernel/setup.c b/arch/m68knommu/kernel/setup.c index a220345e974..abb80fa2b94 100644 --- a/arch/m68knommu/kernel/setup.c +++ b/arch/m68knommu/kernel/setup.c @@ -107,6 +107,9 @@ void (*mach_power_off)( void ) = NULL; #if defined(CONFIG_M5206e) #define CPU "COLDFIRE(m5206e)" #endif +#if defined(CONFIG_M520x) + #define CPU "COLDFIRE(m520x)" +#endif #if defined(CONFIG_M523x) #define CPU "COLDFIRE(m523x)" #endif @@ -132,7 +135,7 @@ void (*mach_power_off)( void ) = NULL; #define CPU "COLDFIRE(m5407)" #endif #ifndef CPU - #define CPU "UNKOWN" + #define CPU "UNKNOWN" #endif /* (es) */ diff --git a/arch/m68knommu/kernel/vmlinux.lds.S b/arch/m68knommu/kernel/vmlinux.lds.S index 47f06787190..0eab92ca4b9 100644 --- a/arch/m68knommu/kernel/vmlinux.lds.S +++ b/arch/m68knommu/kernel/vmlinux.lds.S @@ -125,6 +125,14 @@ #endif /* + * The Freescale 5208EVB board has 32MB of RAM. + */ +#if defined(CONFIG_M5208EVB) +#define RAM_START 0x40020000 +#define RAM_LENGTH 0x01e00000 +#endif + +/* * The senTec COBRA5272 board has nearly the same memory layout as * the M5272C3. We assume 16MiB ram. */ @@ -275,6 +283,7 @@ SECTIONS { *(__ksymtab_strings) /* Built-in module parameters */ + . = ALIGN(4) ; __start___param = .; *(__param) __stop___param = .; diff --git a/arch/m68knommu/platform/520x/Makefile b/arch/m68knommu/platform/520x/Makefile new file mode 100644 index 00000000000..e861b05106b --- /dev/null +++ b/arch/m68knommu/platform/520x/Makefile @@ -0,0 +1,19 @@ +# +# Makefile for the M5208 specific file. +# + +# +# If you want to play with the HW breakpoints then you will +# need to add define this, which will give you a stack backtrace +# on the console port whenever a DBG interrupt occurs. You have to +# set up you HW breakpoints to trigger a DBG interrupt: +# +# EXTRA_CFLAGS += -DTRAP_DBG_INTERRUPT +# EXTRA_AFLAGS += -DTRAP_DBG_INTERRUPT +# + +ifdef CONFIG_FULLDEBUG +AFLAGS += -DDEBUGGER_COMPATIBLE_CACHE=1 +endif + +obj-y := config.o diff --git a/arch/m68knommu/platform/520x/config.c b/arch/m68knommu/platform/520x/config.c new file mode 100644 index 00000000000..71dea2e0f45 --- /dev/null +++ b/arch/m68knommu/platform/520x/config.c @@ -0,0 +1,65 @@ +/***************************************************************************/ + +/* + * linux/arch/m68knommu/platform/520x/config.c + * + * Copyright (C) 2005, Freescale (www.freescale.com) + * Copyright (C) 2005, Intec Automation (mike@steroidmicros.com) + * Copyright (C) 1999-2003, Greg Ungerer (gerg@snapgear.com) + * Copyright (C) 2001-2003, SnapGear Inc. (www.snapgear.com) + */ + +/***************************************************************************/ + +#include <linux/config.h> +#include <linux/kernel.h> +#include <linux/param.h> +#include <asm/machdep.h> +#include <asm/dma.h> + +/***************************************************************************/ + +/* + * DMA channel base address table. + */ +unsigned int dma_base_addr[MAX_M68K_DMA_CHANNELS]; +unsigned int dma_device_address[MAX_M68K_DMA_CHANNELS]; + +/***************************************************************************/ + +void coldfire_pit_tick(void); +void coldfire_pit_init(irqreturn_t (*handler)(int, void *, struct pt_regs *)); +unsigned long coldfire_pit_offset(void); +void coldfire_trap_init(void); +void coldfire_reset(void); + +/***************************************************************************/ + +/* + * Program the vector to be an auto-vectored. + */ + +void mcf_autovector(unsigned int vec) +{ + /* Everything is auto-vectored on the 520x devices */ +} + +/***************************************************************************/ + +void config_BSP(char *commandp, int size) +{ +#ifdef CONFIG_BOOTPARAM + strncpy(commandp, CONFIG_BOOTPARAM_STRING, size); + commandp[size-1] = 0; +#else + memset(commandp, 0, size); +#endif + + mach_sched_init = coldfire_pit_init; + mach_tick = coldfire_pit_tick; + mach_gettimeoffset = coldfire_pit_offset; + mach_trap_init = coldfire_trap_init; + mach_reset = coldfire_reset; +} + +/***************************************************************************/ diff --git a/arch/m68knommu/platform/5307/Makefile b/arch/m68knommu/platform/5307/Makefile index 6fe5a2b8fb0..8d1619dc1ea 100644 --- a/arch/m68knommu/platform/5307/Makefile +++ b/arch/m68knommu/platform/5307/Makefile @@ -19,6 +19,7 @@ endif obj-$(CONFIG_COLDFIRE) += entry.o vectors.o ints.o obj-$(CONFIG_M5206) += timers.o obj-$(CONFIG_M5206e) += timers.o +obj-$(CONFIG_M520x) += pit.o obj-$(CONFIG_M523x) += pit.o obj-$(CONFIG_M5249) += timers.o obj-$(CONFIG_M527x) += pit.o diff --git a/arch/m68knommu/platform/5307/head.S b/arch/m68knommu/platform/5307/head.S index 7f4ba837901..c30c462b99b 100644 --- a/arch/m68knommu/platform/5307/head.S +++ b/arch/m68knommu/platform/5307/head.S @@ -113,6 +113,9 @@ #define MEM_BASE 0x02000000 #define VBR_BASE 0x20000000 /* vectors in SRAM */ #endif +#if defined(CONFIG_M5208EVB) +#define MEM_BASE 0x40000000 +#endif #ifndef MEM_BASE #define MEM_BASE 0x00000000 /* memory base at address 0 */ diff --git a/arch/m68knommu/platform/5307/ints.c b/arch/m68knommu/platform/5307/ints.c index 0117754d44f..a134fb2f056 100644 --- a/arch/m68knommu/platform/5307/ints.c +++ b/arch/m68knommu/platform/5307/ints.c @@ -26,6 +26,7 @@ #include <asm/system.h> #include <asm/irq.h> +#include <asm/irqnode.h> #include <asm/traps.h> #include <asm/page.h> #include <asm/machdep.h> diff --git a/arch/m68knommu/platform/5307/pit.c b/arch/m68knommu/platform/5307/pit.c index a9b2c2e7e28..323f2677e49 100644 --- a/arch/m68knommu/platform/5307/pit.c +++ b/arch/m68knommu/platform/5307/pit.c @@ -3,7 +3,7 @@ /* * pit.c -- Motorola ColdFire PIT timer. Currently this type of * hardware timer only exists in the Motorola ColdFire - * 5270/5271 and 5282 CPUs. + * 5270/5271, 5282 and other CPUs. * * Copyright (C) 1999-2004, Greg Ungerer (gerg@snapgear.com) * Copyright (C) 2001-2004, SnapGear Inc. (www.snapgear.com) @@ -47,10 +47,10 @@ void coldfire_pit_init(irqreturn_t (*handler)(int, void *, struct pt_regs *)) icrp = (volatile unsigned char *) (MCF_IPSBAR + MCFICM_INTC0 + MCFINTC_ICR0 + MCFINT_PIT1); - *icrp = 0x2b; /* PIT1 with level 5, priority 3 */ + *icrp = ICR_INTRCONF; - imrp = (volatile unsigned long *) (MCF_IPSBAR + MCFICM_INTC0 + MCFINTC_IMRH); - *imrp &= ~(1 << (MCFINT_PIT1 - 32)); + imrp = (volatile unsigned long *) (MCF_IPSBAR + MCFICM_INTC0 + MCFPIT_IMR); + *imrp &= ~MCFPIT_IMR_IBIT; /* Set up PIT timer 1 as poll clock */ tp = (volatile struct mcfpit *) (MCF_IPSBAR + MCFPIT_BASE1); @@ -70,7 +70,7 @@ unsigned long coldfire_pit_offset(void) unsigned long pmr, pcntr, offset; tp = (volatile struct mcfpit *) (MCF_IPSBAR + MCFPIT_BASE1); - ipr = (volatile unsigned long *) (MCF_IPSBAR + MCFICM_INTC0 + MCFINTC_IPRH); + ipr = (volatile unsigned long *) (MCF_IPSBAR + MCFICM_INTC0 + MCFPIT_IMR); pmr = *(&tp->pmr); pcntr = *(&tp->pcntr); @@ -80,7 +80,7 @@ unsigned long coldfire_pit_offset(void) * timer interupt is pending, then add on a ticks worth of time. */ offset = ((pmr - pcntr) * (1000000 / HZ)) / pmr; - if ((offset < (1000000 / HZ / 2)) && (*ipr & (1 << (MCFINT_PIT1 - 32)))) + if ((offset < (1000000 / HZ / 2)) && (*ipr & MCFPIT_IMR_IBIT)) offset += 1000000 / HZ; return offset; } diff --git a/arch/mips/Kconfig b/arch/mips/Kconfig index 0097a0d53b3..e380a8322a9 100644 --- a/arch/mips/Kconfig +++ b/arch/mips/Kconfig @@ -958,7 +958,7 @@ config SOC_PNX8550 bool select DMA_NONCOHERENT select HW_HAS_PCI - select SYS_HAS_CPU_R4X00 + select SYS_HAS_CPU_MIPS32_R1 select SYS_SUPPORTS_32BIT_KERNEL config SWAP_IO_SPACE diff --git a/arch/mips/boot/.gitignore b/arch/mips/boot/.gitignore new file mode 100644 index 00000000000..ba63401c6e1 --- /dev/null +++ b/arch/mips/boot/.gitignore @@ -0,0 +1,4 @@ +mkboot +elf2ecoff +zImage +zImage.tmp diff --git a/arch/mips/configs/pnx8550-jbs_defconfig b/arch/mips/configs/pnx8550-jbs_defconfig index 95f84d71191..555837e4c06 100644 --- a/arch/mips/configs/pnx8550-jbs_defconfig +++ b/arch/mips/configs/pnx8550-jbs_defconfig @@ -129,7 +129,7 @@ CONFIG_MIPS_L1_CACHE_SHIFT=5 # # CPU selection # -# CONFIG_CPU_MIPS32_R1 is not set +CONFIG_CPU_MIPS32_R1=y # CONFIG_CPU_MIPS32_R2 is not set # CONFIG_CPU_MIPS64_R1 is not set # CONFIG_CPU_MIPS64_R2 is not set @@ -137,7 +137,7 @@ CONFIG_MIPS_L1_CACHE_SHIFT=5 # CONFIG_CPU_TX39XX is not set # CONFIG_CPU_VR41XX is not set # CONFIG_CPU_R4300 is not set -CONFIG_CPU_R4X00=y +# CONFIG_CPU_R4X00 is not set # CONFIG_CPU_TX49XX is not set # CONFIG_CPU_R5000 is not set # CONFIG_CPU_R5432 is not set @@ -148,10 +148,11 @@ CONFIG_CPU_R4X00=y # CONFIG_CPU_RM7000 is not set # CONFIG_CPU_RM9000 is not set # CONFIG_CPU_SB1 is not set -CONFIG_SYS_HAS_CPU_R4X00=y +CONFIG_SYS_HAS_CPU_MIPS32_R1=y +CONFIG_CPU_MIPS32=y +CONFIG_CPU_MIPSR1=y CONFIG_SYS_SUPPORTS_32BIT_KERNEL=y CONFIG_CPU_SUPPORTS_32BIT_KERNEL=y -CONFIG_CPU_SUPPORTS_64BIT_KERNEL=y # # Kernel type @@ -162,11 +163,11 @@ CONFIG_PAGE_SIZE_4KB=y # CONFIG_PAGE_SIZE_8KB is not set # CONFIG_PAGE_SIZE_16KB is not set # CONFIG_PAGE_SIZE_64KB is not set +CONFIG_CPU_HAS_PREFETCH=y # CONFIG_MIPS_MT is not set # CONFIG_64BIT_PHYS_ADDR is not set # CONFIG_CPU_ADVANCED is not set CONFIG_CPU_HAS_LLSC=y -CONFIG_CPU_HAS_LLDSCD=y CONFIG_CPU_HAS_SYNC=y CONFIG_GENERIC_HARDIRQS=y CONFIG_GENERIC_IRQ_PROBE=y diff --git a/arch/mips/configs/pnx8550-v2pci_defconfig b/arch/mips/configs/pnx8550-v2pci_defconfig index deb24c29ac0..05e65206a7b 100644 --- a/arch/mips/configs/pnx8550-v2pci_defconfig +++ b/arch/mips/configs/pnx8550-v2pci_defconfig @@ -128,7 +128,7 @@ CONFIG_MIPS_L1_CACHE_SHIFT=5 # # CPU selection # -# CONFIG_CPU_MIPS32_R1 is not set +CONFIG_CPU_MIPS32_R1=y # CONFIG_CPU_MIPS32_R2 is not set # CONFIG_CPU_MIPS64_R1 is not set # CONFIG_CPU_MIPS64_R2 is not set @@ -136,7 +136,7 @@ CONFIG_MIPS_L1_CACHE_SHIFT=5 # CONFIG_CPU_TX39XX is not set # CONFIG_CPU_VR41XX is not set # CONFIG_CPU_R4300 is not set -CONFIG_CPU_R4X00=y +# CONFIG_CPU_R4X00 is not set # CONFIG_CPU_TX49XX is not set # CONFIG_CPU_R5000 is not set # CONFIG_CPU_R5432 is not set @@ -147,10 +147,11 @@ CONFIG_CPU_R4X00=y # CONFIG_CPU_RM7000 is not set # CONFIG_CPU_RM9000 is not set # CONFIG_CPU_SB1 is not set -CONFIG_SYS_HAS_CPU_R4X00=y +CONFIG_SYS_HAS_CPU_MIPS32_R1=y +CONFIG_CPU_MIPS32=y +CONFIG_CPU_MIPSR1=y CONFIG_SYS_SUPPORTS_32BIT_KERNEL=y CONFIG_CPU_SUPPORTS_32BIT_KERNEL=y -CONFIG_CPU_SUPPORTS_64BIT_KERNEL=y # # Kernel type @@ -161,6 +162,7 @@ CONFIG_PAGE_SIZE_4KB=y # CONFIG_PAGE_SIZE_8KB is not set # CONFIG_PAGE_SIZE_16KB is not set # CONFIG_PAGE_SIZE_64KB is not set +CONFIG_CPU_HAS_PREFETCH=y # CONFIG_MIPS_MT is not set # CONFIG_64BIT_PHYS_ADDR is not set CONFIG_CPU_ADVANCED=y diff --git a/arch/mips/ddb5xxx/common/rtc_ds1386.c b/arch/mips/ddb5xxx/common/rtc_ds1386.c index f5b11508ff2..995896ac0e3 100644 --- a/arch/mips/ddb5xxx/common/rtc_ds1386.c +++ b/arch/mips/ddb5xxx/common/rtc_ds1386.c @@ -41,7 +41,9 @@ rtc_ds1386_get_time(void) u8 byte; u8 temp; unsigned int year, month, day, hour, minute, second; + unsigned long flags; + spin_lock_irqsave(&rtc_lock, flags); /* let us freeze external registers */ byte = READ_RTC(0xB); byte &= 0x3f; @@ -60,6 +62,7 @@ rtc_ds1386_get_time(void) /* enable time transfer */ byte |= 0x80; WRITE_RTC(0xB, byte); + spin_unlock_irqrestore(&rtc_lock, flags); /* calc hour */ if (temp & 0x40) { @@ -81,7 +84,9 @@ rtc_ds1386_set_time(unsigned long t) u8 byte; u8 temp; u8 year, month, day, hour, minute, second; + unsigned long flags; + spin_lock_irqsave(&rtc_lock, flags); /* let us freeze external registers */ byte = READ_RTC(0xB); byte &= 0x3f; @@ -133,6 +138,7 @@ rtc_ds1386_set_time(unsigned long t) if (second != READ_RTC(0x1)) { WRITE_RTC(0x1, second); } + spin_unlock_irqrestore(&rtc_lock, flags); return 0; } diff --git a/arch/mips/dec/time.c b/arch/mips/dec/time.c index dc7091caa7a..17482234413 100644 --- a/arch/mips/dec/time.c +++ b/arch/mips/dec/time.c @@ -37,10 +37,25 @@ #include <asm/dec/machtype.h> +/* + * Returns true if a clock update is in progress + */ +static inline unsigned char dec_rtc_is_updating(void) +{ + unsigned char uip; + unsigned long flags; + + spin_lock_irqsave(&rtc_lock, flags); + uip = (CMOS_READ(RTC_FREQ_SELECT) & RTC_UIP); + spin_unlock_irqrestore(&rtc_lock, flags); + return uip; +} + static unsigned long dec_rtc_get_time(void) { unsigned int year, mon, day, hour, min, sec, real_year; int i; + unsigned long flags; /* The Linux interpretation of the DS1287 clock register contents: * When the Update-In-Progress (UIP) flag goes from 1 to 0, the @@ -49,11 +64,12 @@ static unsigned long dec_rtc_get_time(void) */ /* read RTC exactly on falling edge of update flag */ for (i = 0; i < 1000000; i++) /* may take up to 1 second... */ - if (CMOS_READ(RTC_FREQ_SELECT) & RTC_UIP) + if (dec_rtc_is_updating()) break; for (i = 0; i < 1000000; i++) /* must try at least 2.228 ms */ - if (!(CMOS_READ(RTC_FREQ_SELECT) & RTC_UIP)) + if (!dec_rtc_is_updating()) break; + spin_lock_irqsave(&rtc_lock, flags); /* Isn't this overkill? UIP above should guarantee consistency */ do { sec = CMOS_READ(RTC_SECONDS); @@ -77,6 +93,7 @@ static unsigned long dec_rtc_get_time(void) * of unused BBU RAM locations. */ real_year = CMOS_READ(RTC_DEC_YEAR); + spin_unlock_irqrestore(&rtc_lock, flags); year += real_year - 72 + 2000; return mktime(year, mon, day, hour, min, sec); @@ -95,6 +112,8 @@ static int dec_rtc_set_mmss(unsigned long nowtime) int real_seconds, real_minutes, cmos_minutes; unsigned char save_control, save_freq_select; + /* irq are locally disabled here */ + spin_lock(&rtc_lock); /* tell the clock it's being set */ save_control = CMOS_READ(RTC_CONTROL); CMOS_WRITE((save_control | RTC_SET), RTC_CONTROL); @@ -141,6 +160,7 @@ static int dec_rtc_set_mmss(unsigned long nowtime) */ CMOS_WRITE(save_control, RTC_CONTROL); CMOS_WRITE(save_freq_select, RTC_FREQ_SELECT); + spin_unlock(&rtc_lock); return retval; } diff --git a/arch/mips/jmr3927/common/rtc_ds1742.c b/arch/mips/jmr3927/common/rtc_ds1742.c index 1ae4318e135..8b407d7dc46 100644 --- a/arch/mips/jmr3927/common/rtc_ds1742.c +++ b/arch/mips/jmr3927/common/rtc_ds1742.c @@ -57,7 +57,9 @@ rtc_ds1742_get_time(void) { unsigned int year, month, day, hour, minute, second; unsigned int century; + unsigned long flags; + spin_lock_irqsave(&rtc_lock, flags); CMOS_WRITE(RTC_READ, RTC_CONTROL); second = BCD2BIN(CMOS_READ(RTC_SECONDS) & RTC_SECONDS_MASK); minute = BCD2BIN(CMOS_READ(RTC_MINUTES)); @@ -67,6 +69,7 @@ rtc_ds1742_get_time(void) year = BCD2BIN(CMOS_READ(RTC_YEAR)); century = BCD2BIN(CMOS_READ(RTC_CENTURY) & RTC_CENTURY_MASK); CMOS_WRITE(0, RTC_CONTROL); + spin_unlock_irqrestore(&rtc_lock, flags); year += century * 100; @@ -81,7 +84,9 @@ rtc_ds1742_set_time(unsigned long t) u8 year, month, day, hour, minute, second; u8 cmos_year, cmos_month, cmos_day, cmos_hour, cmos_minute, cmos_second; int cmos_century; + unsigned long flags; + spin_lock_irqsave(&rtc_lock, flags); CMOS_WRITE(RTC_READ, RTC_CONTROL); cmos_second = (u8)(CMOS_READ(RTC_SECONDS) & RTC_SECONDS_MASK); cmos_minute = (u8)CMOS_READ(RTC_MINUTES); @@ -139,6 +144,7 @@ rtc_ds1742_set_time(unsigned long t) /* RTC_CENTURY and RTC_CONTROL share same address... */ CMOS_WRITE(cmos_century, RTC_CONTROL); + spin_unlock_irqrestore(&rtc_lock, flags); return 0; } diff --git a/arch/mips/kernel/irixsig.c b/arch/mips/kernel/irixsig.c index 908e6368420..dd118c60bcd 100644 --- a/arch/mips/kernel/irixsig.c +++ b/arch/mips/kernel/irixsig.c @@ -502,8 +502,7 @@ asmlinkage int irix_sigpoll_sys(unsigned long __user *set, while(1) { long tmp = 0; - current->state = TASK_INTERRUPTIBLE; - expire = schedule_timeout(expire); + expire = schedule_timeout_interruptible(expire); for (i=0; i<=4; i++) tmp |= (current->pending.signal.sig[i] & kset.sig[i]); diff --git a/arch/mips/kernel/ptrace.c b/arch/mips/kernel/ptrace.c index f1b0f3e1f95..510da5fda56 100644 --- a/arch/mips/kernel/ptrace.c +++ b/arch/mips/kernel/ptrace.c @@ -174,51 +174,10 @@ int ptrace_setfpregs (struct task_struct *child, __u32 __user *data) return 0; } -asmlinkage long sys_ptrace(long request, long pid, long addr, long data) +long arch_ptrace(struct task_struct *child, long request, long addr, long data) { - struct task_struct *child; int ret; -#if 0 - printk("ptrace(r=%d,pid=%d,addr=%08lx,data=%08lx)\n", - (int) request, (int) pid, (unsigned long) addr, - (unsigned long) data); -#endif - lock_kernel(); - ret = -EPERM; - if (request == PTRACE_TRACEME) { - /* are we already being traced? */ - if (current->ptrace & PT_PTRACED) - goto out; - if ((ret = security_ptrace(current->parent, current))) - goto out; - /* set the ptrace bit in the process flags. */ - current->ptrace |= PT_PTRACED; - ret = 0; - goto out; - } - ret = -ESRCH; - read_lock(&tasklist_lock); - child = find_task_by_pid(pid); - if (child) - get_task_struct(child); - read_unlock(&tasklist_lock); - if (!child) - goto out; - - ret = -EPERM; - if (pid == 1) /* you may not mess with init */ - goto out_tsk; - - if (request == PTRACE_ATTACH) { - ret = ptrace_attach(child); - goto out_tsk; - } - - ret = ptrace_check_attach(child, request == PTRACE_KILL); - if (ret < 0) - goto out_tsk; - switch (request) { /* when I and D space are separate, these will need to be fixed. */ case PTRACE_PEEKTEXT: /* read word at location addr. */ @@ -319,7 +278,7 @@ asmlinkage long sys_ptrace(long request, long pid, long addr, long data) if (!cpu_has_dsp) { tmp = 0; ret = -EIO; - goto out_tsk; + goto out; } if (child->thread.dsp.used_dsp) { dregs = __get_dsp_regs(child); @@ -333,14 +292,14 @@ asmlinkage long sys_ptrace(long request, long pid, long addr, long data) if (!cpu_has_dsp) { tmp = 0; ret = -EIO; - goto out_tsk; + goto out; } tmp = child->thread.dsp.dspcontrol; break; default: tmp = 0; ret = -EIO; - goto out_tsk; + goto out; } ret = put_user(tmp, (unsigned long __user *) data); break; @@ -495,11 +454,7 @@ asmlinkage long sys_ptrace(long request, long pid, long addr, long data) ret = ptrace_request(child, request, addr, data); break; } - -out_tsk: - put_task_struct(child); -out: - unlock_kernel(); + out: return ret; } diff --git a/arch/mips/kernel/rtlx.c b/arch/mips/kernel/rtlx.c index 8c81f3cb4e2..1d855112bac 100644 --- a/arch/mips/kernel/rtlx.c +++ b/arch/mips/kernel/rtlx.c @@ -20,42 +20,42 @@ #include <linux/module.h> #include <linux/fs.h> #include <linux/init.h> -#include <asm/uaccess.h> -#include <linux/slab.h> -#include <linux/list.h> -#include <linux/vmalloc.h> -#include <linux/elf.h> -#include <linux/seq_file.h> -#include <linux/syscalls.h> -#include <linux/moduleloader.h> -#include <linux/interrupt.h> #include <linux/poll.h> #include <linux/sched.h> #include <linux/wait.h> #include <asm/mipsmtregs.h> -#include <asm/cacheflush.h> -#include <asm/atomic.h> +#include <asm/bitops.h> #include <asm/cpu.h> #include <asm/processor.h> -#include <asm/system.h> #include <asm/rtlx.h> +#include <asm/uaccess.h> -#define RTLX_MAJOR 64 #define RTLX_TARG_VPE 1 -struct rtlx_info *rtlx; +static struct rtlx_info *rtlx; static int major; static char module_name[] = "rtlx"; -static inline int spacefree(int read, int write, int size); +static struct irqaction irq; +static int irq_num; + +static inline int spacefree(int read, int write, int size) +{ + if (read == write) { + /* + * never fill the buffer completely, so indexes are always + * equal if empty and only empty, or !equal if data available + */ + return size - 1; + } + + return ((read + size - write) % size) - 1; +} static struct chan_waitqueues { wait_queue_head_t rt_queue; wait_queue_head_t lx_queue; } channel_wqs[RTLX_CHANNELS]; -static struct irqaction irq; -static int irq_num; - extern void *vpe_get_shared(int index); static void rtlx_dispatch(struct pt_regs *regs) @@ -63,9 +63,8 @@ static void rtlx_dispatch(struct pt_regs *regs) do_IRQ(MIPSCPU_INT_BASE + MIPS_CPU_RTLX_IRQ, regs); } -irqreturn_t rtlx_interrupt(int irq, void *dev_id, struct pt_regs *regs) +static irqreturn_t rtlx_interrupt(int irq, void *dev_id, struct pt_regs *regs) { - irqreturn_t r = IRQ_HANDLED; int i; for (i = 0; i < RTLX_CHANNELS; i++) { @@ -75,30 +74,7 @@ irqreturn_t rtlx_interrupt(int irq, void *dev_id, struct pt_regs *regs) wake_up_interruptible(&channel_wqs[i].lx_queue); } - return r; -} - -void dump_rtlx(void) -{ - int i; - - printk("id 0x%lx state %d\n", rtlx->id, rtlx->state); - - for (i = 0; i < RTLX_CHANNELS; i++) { - struct rtlx_channel *chan = &rtlx->channel[i]; - - printk(" rt_state %d lx_state %d buffer_size %d\n", - chan->rt_state, chan->lx_state, chan->buffer_size); - - printk(" rt_read %d rt_write %d\n", - chan->rt_read, chan->rt_write); - - printk(" lx_read %d lx_write %d\n", - chan->lx_read, chan->lx_write); - - printk(" rt_buffer <%s>\n", chan->rt_buffer); - printk(" lx_buffer <%s>\n", chan->lx_buffer); - } + return IRQ_HANDLED; } /* call when we have the address of the shared structure from the SP side. */ @@ -108,7 +84,7 @@ static int rtlx_init(struct rtlx_info *rtlxi) if (rtlxi->id != RTLX_ID) { printk(KERN_WARNING "no valid RTLX id at 0x%p\n", rtlxi); - return (-ENOEXEC); + return -ENOEXEC; } /* initialise the wait queues */ @@ -120,9 +96,8 @@ static int rtlx_init(struct rtlx_info *rtlxi) /* set up for interrupt handling */ memset(&irq, 0, sizeof(struct irqaction)); - if (cpu_has_vint) { + if (cpu_has_vint) set_vi_handler(MIPS_CPU_RTLX_IRQ, rtlx_dispatch); - } irq_num = MIPSCPU_INT_BASE + MIPS_CPU_RTLX_IRQ; irq.handler = rtlx_interrupt; @@ -132,7 +107,8 @@ static int rtlx_init(struct rtlx_info *rtlxi) setup_irq(irq_num, &irq); rtlx = rtlxi; - return (0); + + return 0; } /* only allow one open process at a time to open each channel */ @@ -147,36 +123,36 @@ static int rtlx_open(struct inode *inode, struct file *filp) if (rtlx == NULL) { struct rtlx_info **p; if( (p = vpe_get_shared(RTLX_TARG_VPE)) == NULL) { - printk(" vpe_get_shared is NULL. Has an SP program been loaded?\n"); - return (-EFAULT); + printk(KERN_ERR "vpe_get_shared is NULL. " + "Has an SP program been loaded?\n"); + return -EFAULT; } if (*p == NULL) { - printk(" vpe_shared %p %p\n", p, *p); - return (-EFAULT); + printk(KERN_ERR "vpe_shared %p %p\n", p, *p); + return -EFAULT; } if ((ret = rtlx_init(*p)) < 0) - return (ret); + return ret; } chan = &rtlx->channel[minor]; - /* already open? */ - if (chan->lx_state == RTLX_STATE_OPENED) - return (-EBUSY); + if (test_and_set_bit(RTLX_STATE_OPENED, &chan->lx_state)) + return -EBUSY; - chan->lx_state = RTLX_STATE_OPENED; - return (0); + return 0; } static int rtlx_release(struct inode *inode, struct file *filp) { - int minor; + int minor = MINOR(inode->i_rdev); - minor = MINOR(inode->i_rdev); - rtlx->channel[minor].lx_state = RTLX_STATE_UNUSED; - return (0); + clear_bit(RTLX_STATE_OPENED, &rtlx->channel[minor].lx_state); + smp_mb__after_clear_bit(); + + return 0; } static unsigned int rtlx_poll(struct file *file, poll_table * wait) @@ -199,12 +175,13 @@ static unsigned int rtlx_poll(struct file *file, poll_table * wait) if (spacefree(chan->rt_read, chan->rt_write, chan->buffer_size)) mask |= POLLOUT | POLLWRNORM; - return (mask); + return mask; } static ssize_t rtlx_read(struct file *file, char __user * buffer, size_t count, loff_t * ppos) { + unsigned long failed; size_t fl = 0L; int minor; struct rtlx_channel *lx; @@ -216,7 +193,7 @@ static ssize_t rtlx_read(struct file *file, char __user * buffer, size_t count, /* data available? */ if (lx->lx_write == lx->lx_read) { if (file->f_flags & O_NONBLOCK) - return (0); // -EAGAIN makes cat whinge + return 0; /* -EAGAIN makes cat whinge */ /* go to sleep */ add_wait_queue(&channel_wqs[minor].lx_queue, &wait); @@ -232,39 +209,39 @@ static ssize_t rtlx_read(struct file *file, char __user * buffer, size_t count, } /* find out how much in total */ - count = min( count, - (size_t)(lx->lx_write + lx->buffer_size - lx->lx_read) % lx->buffer_size); + count = min(count, + (size_t)(lx->lx_write + lx->buffer_size - lx->lx_read) % lx->buffer_size); /* then how much from the read pointer onwards */ - fl = min( count, (size_t)lx->buffer_size - lx->lx_read); + fl = min(count, (size_t)lx->buffer_size - lx->lx_read); - copy_to_user (buffer, &lx->lx_buffer[lx->lx_read], fl); + failed = copy_to_user (buffer, &lx->lx_buffer[lx->lx_read], fl); + if (failed) { + count = fl - failed; + goto out; + } /* and if there is anything left at the beginning of the buffer */ - if ( count - fl ) - copy_to_user (buffer + fl, lx->lx_buffer, count - fl); + if (count - fl) { + failed = copy_to_user (buffer + fl, lx->lx_buffer, count - fl); + if (failed) { + count -= failed; + goto out; + } + } +out: /* update the index */ lx->lx_read += count; lx->lx_read %= lx->buffer_size; - return (count); -} - -static inline int spacefree(int read, int write, int size) -{ - if (read == write) { - /* never fill the buffer completely, so indexes are always equal if empty - and only empty, or !equal if data available */ - return (size - 1); - } - - return ((read + size - write) % size) - 1; + return count; } static ssize_t rtlx_write(struct file *file, const char __user * buffer, size_t count, loff_t * ppos) { + unsigned long failed; int minor; struct rtlx_channel *rt; size_t fl; @@ -277,7 +254,7 @@ static ssize_t rtlx_write(struct file *file, const char __user * buffer, if (!spacefree(rt->rt_read, rt->rt_write, rt->buffer_size)) { if (file->f_flags & O_NONBLOCK) - return (-EAGAIN); + return -EAGAIN; add_wait_queue(&channel_wqs[minor].rt_queue, &wait); set_current_state(TASK_INTERRUPTIBLE); @@ -290,52 +267,64 @@ static ssize_t rtlx_write(struct file *file, const char __user * buffer, } /* total number of bytes to copy */ - count = min( count, (size_t)spacefree(rt->rt_read, rt->rt_write, rt->buffer_size) ); + count = min(count, (size_t)spacefree(rt->rt_read, rt->rt_write, rt->buffer_size) ); /* first bit from write pointer to the end of the buffer, or count */ fl = min(count, (size_t) rt->buffer_size - rt->rt_write); - copy_from_user(&rt->rt_buffer[rt->rt_write], buffer, fl); + failed = copy_from_user(&rt->rt_buffer[rt->rt_write], buffer, fl); + if (failed) { + count = fl - failed; + goto out; + } /* if there's any left copy to the beginning of the buffer */ - if( count - fl ) - copy_from_user(rt->rt_buffer, buffer + fl, count - fl); + if (count - fl) { + failed = copy_from_user(rt->rt_buffer, buffer + fl, count - fl); + if (failed) { + count -= failed; + goto out; + } + } +out: rt->rt_write += count; rt->rt_write %= rt->buffer_size; - return(count); + return count; } static struct file_operations rtlx_fops = { - .owner = THIS_MODULE, - .open = rtlx_open, - .release = rtlx_release, - .write = rtlx_write, - .read = rtlx_read, - .poll = rtlx_poll + .owner = THIS_MODULE, + .open = rtlx_open, + .release = rtlx_release, + .write = rtlx_write, + .read = rtlx_read, + .poll = rtlx_poll }; -static int rtlx_module_init(void) +static char register_chrdev_failed[] __initdata = + KERN_ERR "rtlx_module_init: unable to register device\n"; + +static int __init rtlx_module_init(void) { - if ((major = register_chrdev(RTLX_MAJOR, module_name, &rtlx_fops)) < 0) { - printk("rtlx_module_init: unable to register device\n"); - return (-EBUSY); + major = register_chrdev(0, module_name, &rtlx_fops); + if (major < 0) { + printk(register_chrdev_failed); + return major; } - if (major == 0) - major = RTLX_MAJOR; - - return (0); + return 0; } -static void rtlx_module_exit(void) +static void __exit rtlx_module_exit(void) { unregister_chrdev(major, module_name); } module_init(rtlx_module_init); module_exit(rtlx_module_exit); + MODULE_DESCRIPTION("MIPS RTLX"); -MODULE_AUTHOR("Elizabeth Clarke, MIPS Technologies, Inc"); +MODULE_AUTHOR("Elizabeth Clarke, MIPS Technologies, Inc."); MODULE_LICENSE("GPL"); diff --git a/arch/mips/kernel/signal.c b/arch/mips/kernel/signal.c index 9202a17db8f..05e09eedabf 100644 --- a/arch/mips/kernel/signal.c +++ b/arch/mips/kernel/signal.c @@ -384,9 +384,6 @@ give_sigsegv: return 0; } -extern void setup_rt_frame_n32(struct k_sigaction * ka, - struct pt_regs *regs, int signr, sigset_t *set, siginfo_t *info); - static inline int handle_signal(unsigned long sig, siginfo_t *info, struct k_sigaction *ka, sigset_t *oldset, struct pt_regs *regs) { diff --git a/arch/mips/kernel/signal32.c b/arch/mips/kernel/signal32.c index dbe82130312..e315d3f6aa6 100644 --- a/arch/mips/kernel/signal32.c +++ b/arch/mips/kernel/signal32.c @@ -647,8 +647,8 @@ static inline void *get_sigframe(struct k_sigaction *ka, struct pt_regs *regs, return (void *)((sp - frame_size) & ALMASK); } -void setup_frame_32(struct k_sigaction * ka, struct pt_regs *regs, - int signr, sigset_t *set) +int setup_frame_32(struct k_sigaction * ka, struct pt_regs *regs, + int signr, sigset_t *set) { struct sigframe *frame; int err = 0; @@ -694,13 +694,15 @@ void setup_frame_32(struct k_sigaction * ka, struct pt_regs *regs, current->comm, current->pid, frame, regs->cp0_epc, frame->sf_code); #endif - return; + return 1; give_sigsegv: force_sigsegv(signr, current); + return 0; } -void setup_rt_frame_32(struct k_sigaction * ka, struct pt_regs *regs, int signr, sigset_t *set, siginfo_t *info) +int setup_rt_frame_32(struct k_sigaction * ka, struct pt_regs *regs, + int signr, sigset_t *set, siginfo_t *info) { struct rt_sigframe32 *frame; int err = 0; @@ -763,10 +765,11 @@ void setup_rt_frame_32(struct k_sigaction * ka, struct pt_regs *regs, int signr, current->comm, current->pid, frame, regs->cp0_epc, frame->rs_code); #endif - return; + return 1; give_sigsegv: force_sigsegv(signr, current); + return 0; } static inline int handle_signal(unsigned long sig, siginfo_t *info, diff --git a/arch/mips/kernel/vpe.c b/arch/mips/kernel/vpe.c index 97fefcc9dbe..06be405be39 100644 --- a/arch/mips/kernel/vpe.c +++ b/arch/mips/kernel/vpe.c @@ -58,10 +58,6 @@ typedef void *vpe_handle; -// defined here because the kernel module loader doesn't have -// anything to do with it. -#define SHN_MIPS_SCOMMON 0xff03 - #ifndef ARCH_SHF_SMALL #define ARCH_SHF_SMALL 0 #endif @@ -69,11 +65,8 @@ typedef void *vpe_handle; /* If this is set, the section belongs in the init part of the module */ #define INIT_OFFSET_MASK (1UL << (BITS_PER_LONG-1)) -// temp number, -#define VPE_MAJOR 63 - static char module_name[] = "vpe"; -static int major = 0; +static int major; /* grab the likely amount of memory we will need. */ #ifdef CONFIG_MIPS_VPE_LOADER_TOM @@ -98,22 +91,7 @@ enum tc_state { TC_STATE_DYNAMIC }; -struct vpe; -typedef struct tc { - enum tc_state state; - int index; - - /* parent VPE */ - struct vpe *pvpe; - - /* The list of TC's with this VPE */ - struct list_head tc; - - /* The global list of tc's */ - struct list_head list; -} tc_t; - -typedef struct vpe { +struct vpe { enum vpe_state state; /* (device) minor associated with this vpe */ @@ -135,7 +113,21 @@ typedef struct vpe { /* shared symbol address */ void *shared_ptr; -} vpe_t; +}; + +struct tc { + enum tc_state state; + int index; + + /* parent VPE */ + struct vpe *pvpe; + + /* The list of TC's with this VPE */ + struct list_head tc; + + /* The global list of tc's */ + struct list_head list; +}; struct vpecontrol_ { /* Virtual processing elements */ @@ -146,7 +138,7 @@ struct vpecontrol_ { } vpecontrol; static void release_progmem(void *ptr); -static void dump_vpe(vpe_t * v); +static void dump_vpe(struct vpe * v); extern void save_gp_address(unsigned int secbase, unsigned int rel); /* get the vpe associated with this minor */ @@ -197,13 +189,11 @@ struct vpe *alloc_vpe(int minor) { struct vpe *v; - if ((v = kmalloc(sizeof(struct vpe), GFP_KERNEL)) == NULL) { + if ((v = kzalloc(sizeof(struct vpe), GFP_KERNEL)) == NULL) { printk(KERN_WARNING "VPE: alloc_vpe no mem\n"); return NULL; } - memset(v, 0, sizeof(struct vpe)); - INIT_LIST_HEAD(&v->tc); list_add_tail(&v->list, &vpecontrol.vpe_list); @@ -216,13 +206,11 @@ struct tc *alloc_tc(int index) { struct tc *t; - if ((t = kmalloc(sizeof(struct tc), GFP_KERNEL)) == NULL) { + if ((t = kzalloc(sizeof(struct tc), GFP_KERNEL)) == NULL) { printk(KERN_WARNING "VPE: alloc_tc no mem\n"); return NULL; } - memset(t, 0, sizeof(struct tc)); - INIT_LIST_HEAD(&t->tc); list_add_tail(&t->list, &vpecontrol.tc_list); @@ -412,16 +400,17 @@ static int apply_r_mips_26(struct module *me, uint32_t *location, return -ENOEXEC; } -/* Not desperately convinced this is a good check of an overflow condition - anyway. But it gets in the way of handling undefined weak symbols which - we want to set to zero. - if ((v & 0xf0000000) != (((unsigned long)location + 4) & 0xf0000000)) { - printk(KERN_ERR - "module %s: relocation overflow\n", - me->name); - return -ENOEXEC; - } -*/ +/* + * Not desperately convinced this is a good check of an overflow condition + * anyway. But it gets in the way of handling undefined weak symbols which + * we want to set to zero. + * if ((v & 0xf0000000) != (((unsigned long)location + 4) & 0xf0000000)) { + * printk(KERN_ERR + * "module %s: relocation overflow\n", + * me->name); + * return -ENOEXEC; + * } + */ *location = (*location & ~0x03ffffff) | ((*location + (v >> 2)) & 0x03ffffff); @@ -681,7 +670,7 @@ static void dump_tclist(void) } /* We are prepared so configure and start the VPE... */ -int vpe_run(vpe_t * v) +int vpe_run(struct vpe * v) { unsigned long val; struct tc *t; @@ -772,7 +761,7 @@ int vpe_run(vpe_t * v) return 0; } -static unsigned long find_vpe_symbols(vpe_t * v, Elf_Shdr * sechdrs, +static unsigned long find_vpe_symbols(struct vpe * v, Elf_Shdr * sechdrs, unsigned int symindex, const char *strtab, struct module *mod) { @@ -792,10 +781,12 @@ static unsigned long find_vpe_symbols(vpe_t * v, Elf_Shdr * sechdrs, return 0; } -/* Allocates a VPE with some program code space(the load address), copies the contents - of the program (p)buffer performing relocatations/etc, free's it when finished. +/* + * Allocates a VPE with some program code space(the load address), copies + * the contents of the program (p)buffer performing relocatations/etc, + * free's it when finished. */ -int vpe_elfload(vpe_t * v) +int vpe_elfload(struct vpe * v) { Elf_Ehdr *hdr; Elf_Shdr *sechdrs; @@ -931,7 +922,7 @@ cleanup: return err; } -static void dump_vpe(vpe_t * v) +static void dump_vpe(struct vpe * v) { struct tc *t; @@ -947,7 +938,7 @@ static void dump_vpe(vpe_t * v) static int vpe_open(struct inode *inode, struct file *filp) { int minor; - vpe_t *v; + struct vpe *v; /* assume only 1 device at the mo. */ if ((minor = MINOR(inode->i_rdev)) != 1) { @@ -1001,7 +992,7 @@ static int vpe_open(struct inode *inode, struct file *filp) static int vpe_release(struct inode *inode, struct file *filp) { int minor, ret = 0; - vpe_t *v; + struct vpe *v; Elf_Ehdr *hdr; minor = MINOR(inode->i_rdev); @@ -1035,7 +1026,7 @@ static ssize_t vpe_write(struct file *file, const char __user * buffer, { int minor; size_t ret = count; - vpe_t *v; + struct vpe *v; minor = MINOR(file->f_dentry->d_inode->i_rdev); if ((v = get_vpe(minor)) == NULL) @@ -1180,14 +1171,11 @@ static int __init vpe_module_init(void) return -ENODEV; } - if ((major = register_chrdev(VPE_MAJOR, module_name, &vpe_fops) < 0)) { + if ((major = register_chrdev(0, module_name, &vpe_fops) < 0)) { printk("VPE loader: unable to register character device\n"); - return -EBUSY; + return major; } - if (major == 0) - major = VPE_MAJOR; - dmt(); dvpe(); diff --git a/arch/mips/lasat/ds1603.c b/arch/mips/lasat/ds1603.c index 9d7812e03dc..7dced67c55e 100644 --- a/arch/mips/lasat/ds1603.c +++ b/arch/mips/lasat/ds1603.c @@ -8,6 +8,7 @@ #include <asm/lasat/lasat.h> #include <linux/delay.h> #include <asm/lasat/ds1603.h> +#include <asm/time.h> #include "ds1603.h" @@ -138,19 +139,27 @@ static void rtc_end_op(void) unsigned long ds1603_read(void) { unsigned long word; + unsigned long flags; + + spin_lock_irqsave(&rtc_lock, flags); rtc_init_op(); rtc_write_byte(READ_TIME_CMD); word = rtc_read_word(); rtc_end_op(); + spin_unlock_irqrestore(&rtc_lock, flags); return word; } int ds1603_set(unsigned long time) { + unsigned long flags; + + spin_lock_irqsave(&rtc_lock, flags); rtc_init_op(); rtc_write_byte(SET_TIME_CMD); rtc_write_word(time); rtc_end_op(); + spin_unlock_irqrestore(&rtc_lock, flags); return 0; } diff --git a/arch/mips/momentum/jaguar_atx/setup.c b/arch/mips/momentum/jaguar_atx/setup.c index 768bf440645..bab192ddc18 100644 --- a/arch/mips/momentum/jaguar_atx/setup.c +++ b/arch/mips/momentum/jaguar_atx/setup.c @@ -149,7 +149,9 @@ arch_initcall(per_cpu_mappings); unsigned long m48t37y_get_time(void) { unsigned int year, month, day, hour, min, sec; + unsigned long flags; + spin_lock_irqsave(&rtc_lock, flags); /* stop the update */ rtc_base[0x7ff8] = 0x40; @@ -166,6 +168,7 @@ unsigned long m48t37y_get_time(void) /* start the update */ rtc_base[0x7ff8] = 0x00; + spin_unlock_irqrestore(&rtc_lock, flags); return mktime(year, month, day, hour, min, sec); } @@ -173,11 +176,13 @@ unsigned long m48t37y_get_time(void) int m48t37y_set_time(unsigned long sec) { struct rtc_time tm; + unsigned long flags; /* convert to a more useful format -- note months count from 0 */ to_tm(sec, &tm); tm.tm_mon += 1; + spin_lock_irqsave(&rtc_lock, flags); /* enable writing */ rtc_base[0x7ff8] = 0x80; @@ -201,6 +206,7 @@ int m48t37y_set_time(unsigned long sec) /* disable writing */ rtc_base[0x7ff8] = 0x00; + spin_unlock_irqrestore(&rtc_lock, flags); return 0; } diff --git a/arch/mips/momentum/ocelot_3/setup.c b/arch/mips/momentum/ocelot_3/setup.c index a7803e08f9d..c9b7ff8148e 100644 --- a/arch/mips/momentum/ocelot_3/setup.c +++ b/arch/mips/momentum/ocelot_3/setup.c @@ -135,7 +135,9 @@ void setup_wired_tlb_entries(void) unsigned long m48t37y_get_time(void) { unsigned int year, month, day, hour, min, sec; + unsigned long flags; + spin_lock_irqsave(&rtc_lock, flags); /* stop the update */ rtc_base[0x7ff8] = 0x40; @@ -152,6 +154,7 @@ unsigned long m48t37y_get_time(void) /* start the update */ rtc_base[0x7ff8] = 0x00; + spin_unlock_irqrestore(&rtc_lock, flags); return mktime(year, month, day, hour, min, sec); } @@ -159,11 +162,13 @@ unsigned long m48t37y_get_time(void) int m48t37y_set_time(unsigned long sec) { struct rtc_time tm; + unsigned long flags; /* convert to a more useful format -- note months count from 0 */ to_tm(sec, &tm); tm.tm_mon += 1; + spin_lock_irqsave(&rtc_lock, flags); /* enable writing */ rtc_base[0x7ff8] = 0x80; @@ -187,6 +192,7 @@ int m48t37y_set_time(unsigned long sec) /* disable writing */ rtc_base[0x7ff8] = 0x00; + spin_unlock_irqrestore(&rtc_lock, flags); return 0; } diff --git a/arch/mips/momentum/ocelot_c/setup.c b/arch/mips/momentum/ocelot_c/setup.c index ce70fc96f16..2755c154747 100644 --- a/arch/mips/momentum/ocelot_c/setup.c +++ b/arch/mips/momentum/ocelot_c/setup.c @@ -140,7 +140,9 @@ unsigned long m48t37y_get_time(void) unsigned char* rtc_base = (unsigned char*)0xfc800000; #endif unsigned int year, month, day, hour, min, sec; + unsigned long flags; + spin_lock_irqsave(&rtc_lock, flags); /* stop the update */ rtc_base[0x7ff8] = 0x40; @@ -157,6 +159,7 @@ unsigned long m48t37y_get_time(void) /* start the update */ rtc_base[0x7ff8] = 0x00; + spin_unlock_irqrestore(&rtc_lock, flags); return mktime(year, month, day, hour, min, sec); } @@ -169,11 +172,13 @@ int m48t37y_set_time(unsigned long sec) unsigned char* rtc_base = (unsigned char*)0xfc800000; #endif struct rtc_time tm; + unsigned long flags; /* convert to a more useful format -- note months count from 0 */ to_tm(sec, &tm); tm.tm_mon += 1; + spin_lock_irqsave(&rtc_lock, flags); /* enable writing */ rtc_base[0x7ff8] = 0x80; @@ -197,6 +202,7 @@ int m48t37y_set_time(unsigned long sec) /* disable writing */ rtc_base[0x7ff8] = 0x00; + spin_unlock_irqrestore(&rtc_lock, flags); return 0; } diff --git a/arch/mips/pmc-sierra/yosemite/setup.c b/arch/mips/pmc-sierra/yosemite/setup.c index bdc2ab55bed..059755b5ed5 100644 --- a/arch/mips/pmc-sierra/yosemite/setup.c +++ b/arch/mips/pmc-sierra/yosemite/setup.c @@ -73,7 +73,9 @@ void __init bus_error_init(void) unsigned long m48t37y_get_time(void) { unsigned int year, month, day, hour, min, sec; + unsigned long flags; + spin_lock_irqsave(&rtc_lock, flags); /* Stop the update to the time */ m48t37_base->control = 0x40; @@ -88,6 +90,7 @@ unsigned long m48t37y_get_time(void) /* Start the update to the time again */ m48t37_base->control = 0x00; + spin_unlock_irqrestore(&rtc_lock, flags); return mktime(year, month, day, hour, min, sec); } @@ -95,11 +98,13 @@ unsigned long m48t37y_get_time(void) int m48t37y_set_time(unsigned long sec) { struct rtc_time tm; + unsigned long flags; /* convert to a more useful format -- note months count from 0 */ to_tm(sec, &tm); tm.tm_mon += 1; + spin_lock_irqsave(&rtc_lock, flags); /* enable writing */ m48t37_base->control = 0x80; @@ -123,6 +128,7 @@ int m48t37y_set_time(unsigned long sec) /* disable writing */ m48t37_base->control = 0x00; + spin_unlock_irqrestore(&rtc_lock, flags); return 0; } diff --git a/arch/mips/sgi-ip22/ip22-time.c b/arch/mips/sgi-ip22/ip22-time.c index df9b5694328..b7300cc5c5a 100644 --- a/arch/mips/sgi-ip22/ip22-time.c +++ b/arch/mips/sgi-ip22/ip22-time.c @@ -35,7 +35,9 @@ static unsigned long indy_rtc_get_time(void) { unsigned int yrs, mon, day, hrs, min, sec; unsigned int save_control; + unsigned long flags; + spin_lock_irqsave(&rtc_lock, flags); save_control = hpc3c0->rtcregs[RTC_CMD] & 0xff; hpc3c0->rtcregs[RTC_CMD] = save_control | RTC_TE; @@ -47,6 +49,7 @@ static unsigned long indy_rtc_get_time(void) yrs = BCD2BIN(hpc3c0->rtcregs[RTC_YEAR] & 0xff); hpc3c0->rtcregs[RTC_CMD] = save_control; + spin_unlock_irqrestore(&rtc_lock, flags); if (yrs < 45) yrs += 30; @@ -60,6 +63,7 @@ static int indy_rtc_set_time(unsigned long tim) { struct rtc_time tm; unsigned int save_control; + unsigned long flags; to_tm(tim, &tm); @@ -68,6 +72,7 @@ static int indy_rtc_set_time(unsigned long tim) if (tm.tm_year >= 100) tm.tm_year -= 100; + spin_lock_irqsave(&rtc_lock, flags); save_control = hpc3c0->rtcregs[RTC_CMD] & 0xff; hpc3c0->rtcregs[RTC_CMD] = save_control | RTC_TE; @@ -80,6 +85,7 @@ static int indy_rtc_set_time(unsigned long tim) hpc3c0->rtcregs[RTC_HUNDREDTH_SECOND] = 0; hpc3c0->rtcregs[RTC_CMD] = save_control; + spin_unlock_irqrestore(&rtc_lock, flags); return 0; } diff --git a/arch/mips/sibyte/swarm/rtc_m41t81.c b/arch/mips/sibyte/swarm/rtc_m41t81.c index 5b4fc26c1b3..c13914bdda5 100644 --- a/arch/mips/sibyte/swarm/rtc_m41t81.c +++ b/arch/mips/sibyte/swarm/rtc_m41t81.c @@ -144,6 +144,7 @@ static int m41t81_write(uint8_t addr, int b) int m41t81_set_time(unsigned long t) { struct rtc_time tm; + unsigned long flags; to_tm(t, &tm); @@ -153,6 +154,7 @@ int m41t81_set_time(unsigned long t) * believe we should finish writing min within a second. */ + spin_lock_irqsave(&rtc_lock, flags); tm.tm_sec = BIN2BCD(tm.tm_sec); m41t81_write(M41T81REG_SC, tm.tm_sec); @@ -180,6 +182,7 @@ int m41t81_set_time(unsigned long t) tm.tm_year %= 100; tm.tm_year = BIN2BCD(tm.tm_year); m41t81_write(M41T81REG_YR, tm.tm_year); + spin_unlock_irqrestore(&rtc_lock, flags); return 0; } @@ -187,19 +190,23 @@ int m41t81_set_time(unsigned long t) unsigned long m41t81_get_time(void) { unsigned int year, mon, day, hour, min, sec; + unsigned long flags; /* * min is valid if two reads of sec are the same. */ for (;;) { + spin_lock_irqsave(&rtc_lock, flags); sec = m41t81_read(M41T81REG_SC); min = m41t81_read(M41T81REG_MN); if (sec == m41t81_read(M41T81REG_SC)) break; + spin_unlock_irqrestore(&rtc_lock, flags); } hour = m41t81_read(M41T81REG_HR) & 0x3f; day = m41t81_read(M41T81REG_DT); mon = m41t81_read(M41T81REG_MO); year = m41t81_read(M41T81REG_YR); + spin_unlock_irqrestore(&rtc_lock, flags); sec = BCD2BIN(sec); min = BCD2BIN(min); diff --git a/arch/mips/sibyte/swarm/rtc_xicor1241.c b/arch/mips/sibyte/swarm/rtc_xicor1241.c index d9ff9323f24..f4a17883641 100644 --- a/arch/mips/sibyte/swarm/rtc_xicor1241.c +++ b/arch/mips/sibyte/swarm/rtc_xicor1241.c @@ -113,9 +113,11 @@ int xicor_set_time(unsigned long t) { struct rtc_time tm; int tmp; + unsigned long flags; to_tm(t, &tm); + spin_lock_irqsave(&rtc_lock, flags); /* unlock writes to the CCR */ xicor_write(X1241REG_SR, X1241REG_SR_WEL); xicor_write(X1241REG_SR, X1241REG_SR_WEL | X1241REG_SR_RWEL); @@ -160,6 +162,7 @@ int xicor_set_time(unsigned long t) xicor_write(X1241REG_HR, tmp); xicor_write(X1241REG_SR, 0); + spin_unlock_irqrestore(&rtc_lock, flags); return 0; } @@ -167,7 +170,9 @@ int xicor_set_time(unsigned long t) unsigned long xicor_get_time(void) { unsigned int year, mon, day, hour, min, sec, y2k; + unsigned long flags; + spin_lock_irqsave(&rtc_lock, flags); sec = xicor_read(X1241REG_SC); min = xicor_read(X1241REG_MN); hour = xicor_read(X1241REG_HR); @@ -183,6 +188,7 @@ unsigned long xicor_get_time(void) mon = xicor_read(X1241REG_MO); year = xicor_read(X1241REG_YR); y2k = xicor_read(X1241REG_Y2K); + spin_unlock_irqrestore(&rtc_lock, flags); sec = BCD2BIN(sec); min = BCD2BIN(min); diff --git a/arch/parisc/kernel/ptrace.c b/arch/parisc/kernel/ptrace.c index 18130c3748f..b6fe202a620 100644 --- a/arch/parisc/kernel/ptrace.c +++ b/arch/parisc/kernel/ptrace.c @@ -78,52 +78,13 @@ void ptrace_disable(struct task_struct *child) pa_psw(child)->l = 0; } -long sys_ptrace(long request, long pid, long addr, long data) +long arch_ptrace(struct task_struct *child, long request, long addr, long data) { - struct task_struct *child; long ret; #ifdef DEBUG_PTRACE long oaddr=addr, odata=data; #endif - lock_kernel(); - ret = -EPERM; - if (request == PTRACE_TRACEME) { - /* are we already being traced? */ - if (current->ptrace & PT_PTRACED) - goto out; - - ret = security_ptrace(current->parent, current); - if (ret) - goto out; - - /* set the ptrace bit in the process flags. */ - current->ptrace |= PT_PTRACED; - ret = 0; - goto out; - } - - ret = -ESRCH; - read_lock(&tasklist_lock); - child = find_task_by_pid(pid); - if (child) - get_task_struct(child); - read_unlock(&tasklist_lock); - if (!child) - goto out; - ret = -EPERM; - if (pid == 1) /* no messing around with init! */ - goto out_tsk; - - if (request == PTRACE_ATTACH) { - ret = ptrace_attach(child); - goto out_tsk; - } - - ret = ptrace_check_attach(child, request == PTRACE_KILL); - if (ret < 0) - goto out_tsk; - switch (request) { case PTRACE_PEEKTEXT: /* read word at location addr. */ case PTRACE_PEEKDATA: { @@ -383,11 +344,11 @@ long sys_ptrace(long request, long pid, long addr, long data) case PTRACE_GETEVENTMSG: ret = put_user(child->ptrace_message, (unsigned int __user *) data); - goto out_tsk; + goto out; default: ret = ptrace_request(child, request, addr, data); - goto out_tsk; + goto out; } out_wake_notrap: @@ -396,10 +357,7 @@ out_wake: wake_up_process(child); ret = 0; out_tsk: - put_task_struct(child); -out: - unlock_kernel(); - DBG("sys_ptrace(%ld, %d, %lx, %lx) returning %ld\n", + DBG("arch_ptrace(%ld, %d, %lx, %lx) returning %ld\n", request, pid, oaddr, odata, ret); return ret; } diff --git a/arch/powerpc/Kconfig b/arch/powerpc/Kconfig index ca7acb0c79f..1493c7896fe 100644 --- a/arch/powerpc/Kconfig +++ b/arch/powerpc/Kconfig @@ -404,6 +404,14 @@ config CPU_FREQ_PMAC this currently includes some models of iBook & Titanium PowerBook. +config CPU_FREQ_PMAC64 + bool "Support for some Apple G5s" + depends on CPU_FREQ && PMAC_SMU && PPC64 + select CPU_FREQ_TABLE + help + This adds support for frequency switching on Apple iMac G5, + and some of the more recent desktop G5 machines as well. + config PPC601_SYNC_FIX bool "Workarounds for PPC601 bugs" depends on 6xx && (PPC_PREP || PPC_PMAC) @@ -484,6 +492,7 @@ source "fs/Kconfig.binfmt" config FORCE_MAX_ZONEORDER int depends on PPC64 + default "9" if PPC_64K_PAGES default "13" config MATH_EMULATION @@ -605,6 +614,7 @@ config NODES_SPAN_OTHER_NODES config PPC_64K_PAGES bool "64k page size" + depends on PPC64 help This option changes the kernel logical page size to 64k. On machines without processor support for 64k pages, the kernel will simulate @@ -916,8 +926,21 @@ source "arch/powerpc/platforms/iseries/Kconfig" source "lib/Kconfig" +menu "Instrumentation Support" + depends on EXPERIMENTAL + source "arch/powerpc/oprofile/Kconfig" +config KPROBES + bool "Kprobes (EXPERIMENTAL)" + help + Kprobes allows you to trap at almost any kernel address and + execute a callback function. register_kprobe() establishes + a probepoint and specifies the callback. Kprobes is useful + for kernel debugging, non-intrusive instrumentation and testing. + If in doubt, say "N". +endmenu + source "arch/powerpc/Kconfig.debug" source "security/Kconfig" diff --git a/arch/powerpc/Kconfig.debug b/arch/powerpc/Kconfig.debug index 0baf64ec80d..30a30bf559e 100644 --- a/arch/powerpc/Kconfig.debug +++ b/arch/powerpc/Kconfig.debug @@ -9,16 +9,6 @@ config DEBUG_STACKOVERFLOW This option will cause messages to be printed if free stack space drops below a certain limit. -config KPROBES - bool "Kprobes" - depends on DEBUG_KERNEL && PPC64 - help - Kprobes allows you to trap at almost any kernel address and - execute a callback function. register_kprobe() establishes - a probepoint and specifies the callback. Kprobes is useful - for kernel debugging, non-intrusive instrumentation and testing. - If in doubt, say "N". - config DEBUG_STACK_USAGE bool "Stack utilization instrumentation" depends on DEBUG_KERNEL && PPC64 diff --git a/arch/powerpc/configs/g5_defconfig b/arch/powerpc/configs/g5_defconfig index 6323065fbf2..e76854f8c12 100644 --- a/arch/powerpc/configs/g5_defconfig +++ b/arch/powerpc/configs/g5_defconfig @@ -1,18 +1,32 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.14-rc4 -# Thu Oct 20 08:30:23 2005 +# Linux kernel version: 2.6.14 +# Mon Nov 7 13:37:59 2005 # +CONFIG_PPC64=y CONFIG_64BIT=y +CONFIG_PPC_MERGE=y CONFIG_MMU=y +CONFIG_GENERIC_HARDIRQS=y CONFIG_RWSEM_XCHGADD_ALGORITHM=y CONFIG_GENERIC_CALIBRATE_DELAY=y -CONFIG_GENERIC_ISA_DMA=y +CONFIG_PPC=y CONFIG_EARLY_PRINTK=y CONFIG_COMPAT=y +CONFIG_SYSVIPC_COMPAT=y CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y CONFIG_ARCH_MAY_HAVE_PC_FDC=y -CONFIG_FORCE_MAX_ZONEORDER=13 + +# +# Processor support +# +CONFIG_POWER4_ONLY=y +CONFIG_POWER4=y +CONFIG_PPC_FPU=y +CONFIG_ALTIVEC=y +CONFIG_PPC_STD_MMU=y +CONFIG_SMP=y +CONFIG_NR_CPUS=2 # # Code maturity level options @@ -67,30 +81,60 @@ CONFIG_MODVERSIONS=y CONFIG_MODULE_SRCVERSION_ALL=y CONFIG_KMOD=y CONFIG_STOP_MACHINE=y -CONFIG_SYSVIPC_COMPAT=y # # Platform support # -# CONFIG_PPC_ISERIES is not set CONFIG_PPC_MULTIPLATFORM=y +# CONFIG_PPC_ISERIES is not set +# CONFIG_EMBEDDED6xx is not set +# CONFIG_APUS is not set # CONFIG_PPC_PSERIES is not set -# CONFIG_PPC_BPA is not set CONFIG_PPC_PMAC=y +CONFIG_PPC_PMAC64=y # CONFIG_PPC_MAPLE is not set -CONFIG_PPC=y -CONFIG_PPC64=y +# CONFIG_PPC_CELL is not set CONFIG_PPC_OF=y -CONFIG_MPIC=y -CONFIG_ALTIVEC=y -CONFIG_KEXEC=y CONFIG_U3_DART=y -CONFIG_PPC_PMAC64=y -CONFIG_BOOTX_TEXT=y -CONFIG_POWER4_ONLY=y +CONFIG_MPIC=y +# CONFIG_PPC_RTAS is not set +# CONFIG_MMIO_NVRAM is not set +# CONFIG_PPC_MPC106 is not set +CONFIG_GENERIC_TBSYNC=y +CONFIG_CPU_FREQ=y +CONFIG_CPU_FREQ_TABLE=y +# CONFIG_CPU_FREQ_DEBUG is not set +CONFIG_CPU_FREQ_STAT=y +# CONFIG_CPU_FREQ_STAT_DETAILS is not set +CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE=y +# CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE is not set +CONFIG_CPU_FREQ_GOV_PERFORMANCE=y +CONFIG_CPU_FREQ_GOV_POWERSAVE=y +CONFIG_CPU_FREQ_GOV_USERSPACE=y +# CONFIG_CPU_FREQ_GOV_ONDEMAND is not set +# CONFIG_CPU_FREQ_GOV_CONSERVATIVE is not set +CONFIG_CPU_FREQ_PMAC64=y +# CONFIG_WANT_EARLY_SERIAL is not set + +# +# Kernel options +# +# CONFIG_HZ_100 is not set +CONFIG_HZ_250=y +# CONFIG_HZ_1000 is not set +CONFIG_HZ=250 +CONFIG_PREEMPT_NONE=y +# CONFIG_PREEMPT_VOLUNTARY is not set +# CONFIG_PREEMPT is not set +# CONFIG_PREEMPT_BKL is not set +CONFIG_BINFMT_ELF=y +# CONFIG_BINFMT_MISC is not set +CONFIG_FORCE_MAX_ZONEORDER=13 CONFIG_IOMMU_VMERGE=y -CONFIG_SMP=y -CONFIG_NR_CPUS=2 +# CONFIG_HOTPLUG_CPU is not set +CONFIG_KEXEC=y +CONFIG_IRQ_ALL_CPUS=y +# CONFIG_NUMA is not set CONFIG_ARCH_SELECT_MEMORY_MODEL=y CONFIG_ARCH_FLATMEM_ENABLE=y CONFIG_SELECT_MEMORY_MODEL=y @@ -100,28 +144,21 @@ CONFIG_FLATMEM_MANUAL=y CONFIG_FLATMEM=y CONFIG_FLAT_NODE_MEM_MAP=y # CONFIG_SPARSEMEM_STATIC is not set -# CONFIG_NUMA is not set +CONFIG_SPLIT_PTLOCK_CPUS=4 +# CONFIG_PPC_64K_PAGES is not set # CONFIG_SCHED_SMT is not set -CONFIG_PREEMPT_NONE=y -# CONFIG_PREEMPT_VOLUNTARY is not set -# CONFIG_PREEMPT is not set -# CONFIG_PREEMPT_BKL is not set -# CONFIG_HZ_100 is not set -CONFIG_HZ_250=y -# CONFIG_HZ_1000 is not set -CONFIG_HZ=250 -CONFIG_GENERIC_HARDIRQS=y -CONFIG_SECCOMP=y -CONFIG_BINFMT_ELF=y -# CONFIG_BINFMT_MISC is not set -# CONFIG_HOTPLUG_CPU is not set CONFIG_PROC_DEVICETREE=y # CONFIG_CMDLINE_BOOL is not set +# CONFIG_PM is not set +CONFIG_SECCOMP=y CONFIG_ISA_DMA_API=y # -# Bus Options +# Bus options # +CONFIG_GENERIC_ISA_DMA=y +# CONFIG_PPC_I8259 is not set +# CONFIG_PPC_INDIRECT_PCI is not set CONFIG_PCI=y CONFIG_PCI_DOMAINS=y CONFIG_PCI_LEGACY_PROC=y @@ -136,6 +173,7 @@ CONFIG_PCI_LEGACY_PROC=y # PCI Hotplug Support # # CONFIG_HOTPLUG_PCI is not set +CONFIG_KERNEL_START=0xc000000000000000 # # Networking @@ -276,6 +314,10 @@ CONFIG_LLC=y # CONFIG_NET_DIVERT is not set # CONFIG_ECONET is not set # CONFIG_WAN_ROUTER is not set + +# +# QoS and/or fair queueing +# # CONFIG_NET_SCHED is not set CONFIG_NET_CLS_ROUTE=y @@ -348,6 +390,11 @@ CONFIG_IOSCHED_NOOP=y CONFIG_IOSCHED_AS=y CONFIG_IOSCHED_DEADLINE=y CONFIG_IOSCHED_CFQ=y +CONFIG_DEFAULT_AS=y +# CONFIG_DEFAULT_DEADLINE is not set +# CONFIG_DEFAULT_CFQ is not set +# CONFIG_DEFAULT_NOOP is not set +CONFIG_DEFAULT_IOSCHED="anticipatory" # CONFIG_ATA_OVER_ETH is not set # @@ -449,6 +496,7 @@ CONFIG_SCSI_SPI_ATTRS=y # # SCSI low-level drivers # +# CONFIG_ISCSI_TCP is not set # CONFIG_BLK_DEV_3W_XXXX_RAID is not set # CONFIG_SCSI_3W_9XXX is not set # CONFIG_SCSI_ACARD is not set @@ -465,10 +513,12 @@ CONFIG_SCSI_SATA_SVW=y # CONFIG_SCSI_ATA_PIIX is not set # CONFIG_SCSI_SATA_MV is not set # CONFIG_SCSI_SATA_NV is not set -# CONFIG_SCSI_SATA_PROMISE is not set +# CONFIG_SCSI_PDC_ADMA is not set # CONFIG_SCSI_SATA_QSTOR is not set +# CONFIG_SCSI_SATA_PROMISE is not set # CONFIG_SCSI_SATA_SX4 is not set # CONFIG_SCSI_SATA_SIL is not set +# CONFIG_SCSI_SATA_SIL24 is not set # CONFIG_SCSI_SATA_SIS is not set # CONFIG_SCSI_SATA_ULI is not set # CONFIG_SCSI_SATA_VIA is not set @@ -567,6 +617,9 @@ CONFIG_IEEE1394_RAWIO=y CONFIG_ADB_PMU=y CONFIG_PMAC_SMU=y CONFIG_THERM_PM72=y +CONFIG_WINDFARM=y +CONFIG_WINDFARM_PM81=y +CONFIG_WINDFARM_PM91=y # # Network device support @@ -603,6 +656,7 @@ CONFIG_SUNGEM=y # CONFIG_NET_TULIP is not set # CONFIG_HP100 is not set # CONFIG_NET_PCI is not set +# CONFIG_FEC_8XX is not set # # Ethernet (1000 Mbit) @@ -768,6 +822,7 @@ CONFIG_MAX_RAW_DEVS=256 # TPM devices # # CONFIG_TCG_TPM is not set +# CONFIG_TELCLOCK is not set # # I2C support @@ -820,6 +875,7 @@ CONFIG_I2C_PMAC_SMU=y # CONFIG_SENSORS_PCF8591 is not set # CONFIG_SENSORS_RTC8564 is not set # CONFIG_SENSORS_MAX6875 is not set +# CONFIG_RTC_X1205_I2C is not set # CONFIG_I2C_DEBUG_CORE is not set # CONFIG_I2C_DEBUG_ALGO is not set # CONFIG_I2C_DEBUG_BUS is not set @@ -876,10 +932,9 @@ CONFIG_FB_OF=y # CONFIG_FB_ASILIANT is not set # CONFIG_FB_IMSTT is not set # CONFIG_FB_VGA16 is not set -# CONFIG_FB_NVIDIA is not set -CONFIG_FB_RIVA=y -# CONFIG_FB_RIVA_I2C is not set -# CONFIG_FB_RIVA_DEBUG is not set +CONFIG_FB_NVIDIA=y +CONFIG_FB_NVIDIA_I2C=y +# CONFIG_FB_RIVA is not set # CONFIG_FB_MATROX is not set # CONFIG_FB_RADEON_OLD is not set CONFIG_FB_RADEON=y @@ -924,7 +979,96 @@ CONFIG_LCD_DEVICE=y # # Sound # -# CONFIG_SOUND is not set +CONFIG_SOUND=m + +# +# Advanced Linux Sound Architecture +# +CONFIG_SND=m +CONFIG_SND_TIMER=m +CONFIG_SND_PCM=m +CONFIG_SND_HWDEP=m +CONFIG_SND_RAWMIDI=m +CONFIG_SND_SEQUENCER=m +# CONFIG_SND_SEQ_DUMMY is not set +CONFIG_SND_OSSEMUL=y +CONFIG_SND_MIXER_OSS=m +CONFIG_SND_PCM_OSS=m +CONFIG_SND_SEQUENCER_OSS=y +# CONFIG_SND_VERBOSE_PRINTK is not set +# CONFIG_SND_DEBUG is not set +CONFIG_SND_GENERIC_DRIVER=y + +# +# Generic devices +# +# CONFIG_SND_DUMMY is not set +# CONFIG_SND_VIRMIDI is not set +# CONFIG_SND_MTPAV is not set +# CONFIG_SND_SERIAL_U16550 is not set +# CONFIG_SND_MPU401 is not set + +# +# PCI devices +# +# CONFIG_SND_ALI5451 is not set +# CONFIG_SND_ATIIXP is not set +# CONFIG_SND_ATIIXP_MODEM is not set +# CONFIG_SND_AU8810 is not set +# CONFIG_SND_AU8820 is not set +# CONFIG_SND_AU8830 is not set +# CONFIG_SND_AZT3328 is not set +# CONFIG_SND_BT87X is not set +# CONFIG_SND_CS46XX is not set +# CONFIG_SND_CS4281 is not set +# CONFIG_SND_EMU10K1 is not set +# CONFIG_SND_EMU10K1X is not set +# CONFIG_SND_CA0106 is not set +# CONFIG_SND_KORG1212 is not set +# CONFIG_SND_MIXART is not set +# CONFIG_SND_NM256 is not set +# CONFIG_SND_RME32 is not set +# CONFIG_SND_RME96 is not set +# CONFIG_SND_RME9652 is not set +# CONFIG_SND_HDSP is not set +# CONFIG_SND_HDSPM is not set +# CONFIG_SND_TRIDENT is not set +# CONFIG_SND_YMFPCI is not set +# CONFIG_SND_AD1889 is not set +# CONFIG_SND_ALS4000 is not set +# CONFIG_SND_CMIPCI is not set +# CONFIG_SND_ENS1370 is not set +# CONFIG_SND_ENS1371 is not set +# CONFIG_SND_ES1938 is not set +# CONFIG_SND_ES1968 is not set +# CONFIG_SND_MAESTRO3 is not set +# CONFIG_SND_FM801 is not set +# CONFIG_SND_ICE1712 is not set +# CONFIG_SND_ICE1724 is not set +# CONFIG_SND_INTEL8X0 is not set +# CONFIG_SND_INTEL8X0M is not set +# CONFIG_SND_SONICVIBES is not set +# CONFIG_SND_VIA82XX is not set +# CONFIG_SND_VIA82XX_MODEM is not set +# CONFIG_SND_VX222 is not set +# CONFIG_SND_HDA_INTEL is not set + +# +# ALSA PowerMac devices +# +CONFIG_SND_POWERMAC=m +CONFIG_SND_POWERMAC_AUTO_DRC=y + +# +# USB devices +# +CONFIG_SND_USB_AUDIO=m +# CONFIG_SND_USB_USX2Y is not set + +# +# Open Sound System +# +# CONFIG_SOUND_PRIME is not set # # USB support @@ -958,12 +1102,16 @@ CONFIG_USB_OHCI_LITTLE_ENDIAN=y # # USB Device Class drivers # -# CONFIG_USB_BLUETOOTH_TTY is not set +# CONFIG_OBSOLETE_OSS_USB_DRIVER is not set CONFIG_USB_ACM=m CONFIG_USB_PRINTER=y # -# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' may also be needed; see USB_STORAGE Help for more information +# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' +# + +# +# may also be needed; see USB_STORAGE Help for more information # CONFIG_USB_STORAGE=y # CONFIG_USB_STORAGE_DEBUG is not set @@ -1074,6 +1222,7 @@ CONFIG_USB_SERIAL_KEYSPAN_USA49WLC=y CONFIG_USB_SERIAL_KLSI=m CONFIG_USB_SERIAL_KOBIL_SCT=m CONFIG_USB_SERIAL_MCT_U232=m +# CONFIG_USB_SERIAL_NOKIA_DKU2 is not set CONFIG_USB_SERIAL_PL2303=m # CONFIG_USB_SERIAL_HP4X is not set CONFIG_USB_SERIAL_SAFE=m @@ -1311,6 +1460,20 @@ CONFIG_NLS_ISO8859_15=y CONFIG_NLS_UTF8=y # +# Library routines +# +CONFIG_CRC_CCITT=m +# CONFIG_CRC16 is not set +CONFIG_CRC32=y +CONFIG_LIBCRC32C=m +CONFIG_ZLIB_INFLATE=y +CONFIG_ZLIB_DEFLATE=m +CONFIG_TEXTSEARCH=y +CONFIG_TEXTSEARCH_KMP=m +CONFIG_TEXTSEARCH_BM=m +CONFIG_TEXTSEARCH_FSM=m + +# # Profiling support # CONFIG_PROFILING=y @@ -1331,12 +1494,14 @@ CONFIG_DETECT_SOFTLOCKUP=y # CONFIG_DEBUG_KOBJECT is not set # CONFIG_DEBUG_INFO is not set CONFIG_DEBUG_FS=y +# CONFIG_DEBUG_VM is not set +# CONFIG_RCU_TORTURE_TEST is not set # CONFIG_DEBUG_STACKOVERFLOW is not set # CONFIG_KPROBES is not set # CONFIG_DEBUG_STACK_USAGE is not set # CONFIG_DEBUGGER is not set -# CONFIG_PPCDBG is not set CONFIG_IRQSTACKS=y +CONFIG_BOOTX_TEXT=y # # Security options @@ -1376,17 +1541,3 @@ CONFIG_CRYPTO_TEST=m # # Hardware crypto devices # - -# -# Library routines -# -CONFIG_CRC_CCITT=m -# CONFIG_CRC16 is not set -CONFIG_CRC32=y -CONFIG_LIBCRC32C=m -CONFIG_ZLIB_INFLATE=y -CONFIG_ZLIB_DEFLATE=m -CONFIG_TEXTSEARCH=y -CONFIG_TEXTSEARCH_KMP=m -CONFIG_TEXTSEARCH_BM=m -CONFIG_TEXTSEARCH_FSM=m diff --git a/arch/powerpc/kernel/cputable.c b/arch/powerpc/kernel/cputable.c index 33c63bcf69f..cc4e9eb1c13 100644 --- a/arch/powerpc/kernel/cputable.c +++ b/arch/powerpc/kernel/cputable.c @@ -929,6 +929,16 @@ struct cpu_spec cpu_specs[] = { .icache_bsize = 32, .dcache_bsize = 32, }, + { /* 440SPe Rev. A */ + .pvr_mask = 0xff000fff, + .pvr_value = 0x53000890, + .cpu_name = "440SPe Rev. A", + .cpu_features = CPU_FTR_SPLIT_ID_CACHE | + CPU_FTR_USE_TB, + .cpu_user_features = PPC_FEATURE_32 | PPC_FEATURE_HAS_MMU, + .icache_bsize = 32, + .dcache_bsize = 32, + }, #endif /* CONFIG_44x */ #ifdef CONFIG_FSL_BOOKE { /* e200z5 */ diff --git a/arch/powerpc/kernel/misc_64.S b/arch/powerpc/kernel/misc_64.S index b3e95ff0dba..ae1433da09b 100644 --- a/arch/powerpc/kernel/misc_64.S +++ b/arch/powerpc/kernel/misc_64.S @@ -604,6 +604,76 @@ _GLOBAL(real_writeb) #endif /* defined(CONFIG_PPC_PMAC) || defined(CONFIG_PPC_MAPLE) */ /* + * SCOM access functions for 970 (FX only for now) + * + * unsigned long scom970_read(unsigned int address); + * void scom970_write(unsigned int address, unsigned long value); + * + * The address passed in is the 24 bits register address. This code + * is 970 specific and will not check the status bits, so you should + * know what you are doing. + */ +_GLOBAL(scom970_read) + /* interrupts off */ + mfmsr r4 + ori r0,r4,MSR_EE + xori r0,r0,MSR_EE + mtmsrd r0,1 + + /* rotate 24 bits SCOM address 8 bits left and mask out it's low 8 bits + * (including parity). On current CPUs they must be 0'd, + * and finally or in RW bit + */ + rlwinm r3,r3,8,0,15 + ori r3,r3,0x8000 + + /* do the actual scom read */ + sync + mtspr SPRN_SCOMC,r3 + isync + mfspr r3,SPRN_SCOMD + isync + mfspr r0,SPRN_SCOMC + isync + + /* XXX: fixup result on some buggy 970's (ouch ! we lost a bit, bah + * that's the best we can do). Not implemented yet as we don't use + * the scom on any of the bogus CPUs yet, but may have to be done + * ultimately + */ + + /* restore interrupts */ + mtmsrd r4,1 + blr + + +_GLOBAL(scom970_write) + /* interrupts off */ + mfmsr r5 + ori r0,r5,MSR_EE + xori r0,r0,MSR_EE + mtmsrd r0,1 + + /* rotate 24 bits SCOM address 8 bits left and mask out it's low 8 bits + * (including parity). On current CPUs they must be 0'd. + */ + + rlwinm r3,r3,8,0,15 + + sync + mtspr SPRN_SCOMD,r4 /* write data */ + isync + mtspr SPRN_SCOMC,r3 /* write command */ + isync + mfspr 3,SPRN_SCOMC + isync + + /* restore interrupts */ + mtmsrd r5,1 + blr + + +/* * Create a kernel thread * kernel_thread(fn, arg, flags) */ diff --git a/arch/powerpc/kernel/process.c b/arch/powerpc/kernel/process.c index 7f64f0464d4..de69fb37c73 100644 --- a/arch/powerpc/kernel/process.c +++ b/arch/powerpc/kernel/process.c @@ -46,10 +46,10 @@ #include <asm/processor.h> #include <asm/mmu.h> #include <asm/prom.h> +#include <asm/machdep.h> #ifdef CONFIG_PPC64 #include <asm/firmware.h> #include <asm/time.h> -#include <asm/machdep.h> #endif extern unsigned long _get_SP(void); @@ -203,10 +203,8 @@ int dump_spe(struct pt_regs *regs, elf_vrregset_t *evrregs) int set_dabr(unsigned long dabr) { -#ifdef CONFIG_PPC64 if (ppc_md.set_dabr) return ppc_md.set_dabr(dabr); -#endif mtspr(SPRN_DABR, dabr); return 0; diff --git a/arch/powerpc/kernel/prom.c b/arch/powerpc/kernel/prom.c index 3675ef4bac9..f645adb5753 100644 --- a/arch/powerpc/kernel/prom.c +++ b/arch/powerpc/kernel/prom.c @@ -1974,14 +1974,29 @@ EXPORT_SYMBOL(get_property); /* * Add a property to a node */ -void prom_add_property(struct device_node* np, struct property* prop) +int prom_add_property(struct device_node* np, struct property* prop) { - struct property **next = &np->properties; + struct property **next; prop->next = NULL; - while (*next) + write_lock(&devtree_lock); + next = &np->properties; + while (*next) { + if (strcmp(prop->name, (*next)->name) == 0) { + /* duplicate ! don't insert it */ + write_unlock(&devtree_lock); + return -1; + } next = &(*next)->next; + } *next = prop; + write_unlock(&devtree_lock); + + /* try to add to proc as well if it was initialized */ + if (np->pde) + proc_device_tree_add_prop(np->pde, prop); + + return 0; } /* I quickly hacked that one, check against spec ! */ diff --git a/arch/powerpc/kernel/prom_init.c b/arch/powerpc/kernel/prom_init.c index c758b6624d7..6dc33d19fc2 100644 --- a/arch/powerpc/kernel/prom_init.c +++ b/arch/powerpc/kernel/prom_init.c @@ -403,19 +403,19 @@ static int __init prom_next_node(phandle *nodep) } } -static int __init prom_getprop(phandle node, const char *pname, +static int inline prom_getprop(phandle node, const char *pname, void *value, size_t valuelen) { return call_prom("getprop", 4, 1, node, ADDR(pname), (u32)(unsigned long) value, (u32) valuelen); } -static int __init prom_getproplen(phandle node, const char *pname) +static int inline prom_getproplen(phandle node, const char *pname) { return call_prom("getproplen", 2, 1, node, ADDR(pname)); } -static int __init prom_setprop(phandle node, const char *pname, +static int inline prom_setprop(phandle node, const char *pname, void *value, size_t valuelen) { return call_prom("setprop", 4, 1, node, ADDR(pname), @@ -1408,8 +1408,9 @@ static int __init prom_find_machine_type(void) struct prom_t *_prom = &RELOC(prom); char compat[256]; int len, i = 0; +#ifdef CONFIG_PPC64 phandle rtas; - +#endif len = prom_getprop(_prom->root, "compatible", compat, sizeof(compat)-1); if (len > 0) { @@ -1872,7 +1873,7 @@ static void __init fixup_device_tree(void) if (prom_getprop(u3, "device-rev", &u3_rev, sizeof(u3_rev)) == PROM_ERROR) return; - if (u3_rev != 0x35 && u3_rev != 0x37) + if (u3_rev < 0x35 || u3_rev > 0x39) return; /* does it need fixup ? */ if (prom_getproplen(i2c, "interrupts") > 0) diff --git a/arch/powerpc/kernel/ptrace.c b/arch/powerpc/kernel/ptrace.c index 568ea335d61..3d2abd95c7a 100644 --- a/arch/powerpc/kernel/ptrace.c +++ b/arch/powerpc/kernel/ptrace.c @@ -248,46 +248,10 @@ void ptrace_disable(struct task_struct *child) clear_single_step(child); } -long sys_ptrace(long request, long pid, long addr, long data) +long arch_ptrace(struct task_struct *child, long request, long addr, long data) { - struct task_struct *child; int ret = -EPERM; - lock_kernel(); - if (request == PTRACE_TRACEME) { - /* are we already being traced? */ - if (current->ptrace & PT_PTRACED) - goto out; - ret = security_ptrace(current->parent, current); - if (ret) - goto out; - /* set the ptrace bit in the process flags. */ - current->ptrace |= PT_PTRACED; - ret = 0; - goto out; - } - ret = -ESRCH; - read_lock(&tasklist_lock); - child = find_task_by_pid(pid); - if (child) - get_task_struct(child); - read_unlock(&tasklist_lock); - if (!child) - goto out; - - ret = -EPERM; - if (pid == 1) /* you may not mess with init */ - goto out_tsk; - - if (request == PTRACE_ATTACH) { - ret = ptrace_attach(child); - goto out_tsk; - } - - ret = ptrace_check_attach(child, request == PTRACE_KILL); - if (ret < 0) - goto out_tsk; - switch (request) { /* when I and D space are separate, these will need to be fixed. */ case PTRACE_PEEKTEXT: /* read word at location addr. */ @@ -540,10 +504,7 @@ long sys_ptrace(long request, long pid, long addr, long data) ret = ptrace_request(child, request, addr, data); break; } -out_tsk: - put_task_struct(child); -out: - unlock_kernel(); + return ret; } diff --git a/arch/powerpc/kernel/rtas.c b/arch/powerpc/kernel/rtas.c index b7fc2d88495..9d4e07f6f1e 100644 --- a/arch/powerpc/kernel/rtas.c +++ b/arch/powerpc/kernel/rtas.c @@ -17,6 +17,7 @@ #include <linux/spinlock.h> #include <linux/module.h> #include <linux/init.h> +#include <linux/delay.h> #include <asm/prom.h> #include <asm/rtas.h> @@ -83,7 +84,7 @@ void call_rtas_display_status_delay(unsigned char c) while (width-- > 0) call_rtas_display_status(' '); width = 16; - udelay(500000); + mdelay(500); pending_newline = 1; } else { if (pending_newline) { @@ -608,7 +609,6 @@ asmlinkage int ppc_rtas(struct rtas_args __user *uargs) return 0; } -#ifdef CONFIG_SMP /* This version can't take the spinlock, because it never returns */ struct rtas_args rtas_stop_self_args = { @@ -633,7 +633,6 @@ void rtas_stop_self(void) panic("Alas, I survived.\n"); } -#endif /* * Call early during boot, before mem init or bootmem, to retreive the RTAS diff --git a/arch/powerpc/kernel/setup-common.c b/arch/powerpc/kernel/setup-common.c index d43fa8c0e5a..e22856ecb5a 100644 --- a/arch/powerpc/kernel/setup-common.c +++ b/arch/powerpc/kernel/setup-common.c @@ -405,6 +405,46 @@ static int __init set_preferred_console(void) console_initcall(set_preferred_console); #endif /* CONFIG_PPC_MULTIPLATFORM */ +void __init check_for_initrd(void) +{ +#ifdef CONFIG_BLK_DEV_INITRD + unsigned long *prop; + + DBG(" -> check_for_initrd()\n"); + + if (of_chosen) { + prop = (unsigned long *)get_property(of_chosen, + "linux,initrd-start", NULL); + if (prop != NULL) { + initrd_start = (unsigned long)__va(*prop); + prop = (unsigned long *)get_property(of_chosen, + "linux,initrd-end", NULL); + if (prop != NULL) { + initrd_end = (unsigned long)__va(*prop); + initrd_below_start_ok = 1; + } else + initrd_start = 0; + } + } + + /* If we were passed an initrd, set the ROOT_DEV properly if the values + * look sensible. If not, clear initrd reference. + */ + if (initrd_start >= KERNELBASE && initrd_end >= KERNELBASE && + initrd_end > initrd_start) + ROOT_DEV = Root_RAM0; + else { + printk("Bogus initrd %08lx %08lx\n", initrd_start, initrd_end); + initrd_start = initrd_end = 0; + } + + if (initrd_start) + printk("Found initrd at 0x%lx:0x%lx\n", initrd_start, initrd_end); + + DBG(" <- check_for_initrd()\n"); +#endif /* CONFIG_BLK_DEV_INITRD */ +} + #ifdef CONFIG_SMP /** diff --git a/arch/powerpc/kernel/setup_32.c b/arch/powerpc/kernel/setup_32.c index b45eedbb4b3..3af2631e3fa 100644 --- a/arch/powerpc/kernel/setup_32.c +++ b/arch/powerpc/kernel/setup_32.c @@ -286,6 +286,7 @@ void __init setup_arch(char **cmdline_p) loops_per_jiffy = 500000000 / HZ; unflatten_device_tree(); + check_for_initrd(); finish_device_tree(); smp_setup_cpu_maps(); diff --git a/arch/powerpc/kernel/setup_64.c b/arch/powerpc/kernel/setup_64.c index b0994050024..0471e843b6c 100644 --- a/arch/powerpc/kernel/setup_64.c +++ b/arch/powerpc/kernel/setup_64.c @@ -41,7 +41,6 @@ #include <asm/elf.h> #include <asm/machdep.h> #include <asm/paca.h> -#include <asm/ppcdebug.h> #include <asm/time.h> #include <asm/cputable.h> #include <asm/sections.h> @@ -60,6 +59,7 @@ #include <asm/firmware.h> #include <asm/systemcfg.h> #include <asm/xmon.h> +#include <asm/udbg.h> #ifdef DEBUG #define DBG(fmt...) udbg_printf(fmt) @@ -244,12 +244,6 @@ void __init early_setup(unsigned long dt_ptr) DBG(" -> early_setup()\n"); /* - * Fill the default DBG level (do we want to keep - * that old mecanism around forever ?) - */ - ppcdbg_initialize(); - - /* * Do early initializations using the flattened device * tree, like retreiving the physical memory map or * calculating/retreiving the hash table size @@ -401,43 +395,6 @@ static void __init initialize_cache_info(void) DBG(" <- initialize_cache_info()\n"); } -static void __init check_for_initrd(void) -{ -#ifdef CONFIG_BLK_DEV_INITRD - u64 *prop; - - DBG(" -> check_for_initrd()\n"); - - if (of_chosen) { - prop = (u64 *)get_property(of_chosen, - "linux,initrd-start", NULL); - if (prop != NULL) { - initrd_start = (unsigned long)__va(*prop); - prop = (u64 *)get_property(of_chosen, - "linux,initrd-end", NULL); - if (prop != NULL) { - initrd_end = (unsigned long)__va(*prop); - initrd_below_start_ok = 1; - } else - initrd_start = 0; - } - } - - /* If we were passed an initrd, set the ROOT_DEV properly if the values - * look sensible. If not, clear initrd reference. - */ - if (initrd_start >= KERNELBASE && initrd_end >= KERNELBASE && - initrd_end > initrd_start) - ROOT_DEV = Root_RAM0; - else - initrd_start = initrd_end = 0; - - if (initrd_start) - printk("Found initrd at 0x%lx:0x%lx\n", initrd_start, initrd_end); - - DBG(" <- check_for_initrd()\n"); -#endif /* CONFIG_BLK_DEV_INITRD */ -} /* * Do some initial setup of the system. The parameters are those which @@ -521,7 +478,6 @@ void __init setup_system(void) printk("-----------------------------------------------------\n"); printk("ppc64_pft_size = 0x%lx\n", ppc64_pft_size); - printk("ppc64_debug_switch = 0x%lx\n", ppc64_debug_switch); printk("ppc64_interrupt_controller = 0x%ld\n", ppc64_interrupt_controller); printk("systemcfg = 0x%p\n", systemcfg); printk("systemcfg->platform = 0x%x\n", systemcfg->platform); diff --git a/arch/powerpc/kernel/signal_32.c b/arch/powerpc/kernel/signal_32.c index 876c57c1136..081d931eae4 100644 --- a/arch/powerpc/kernel/signal_32.c +++ b/arch/powerpc/kernel/signal_32.c @@ -44,7 +44,6 @@ #include <asm/cacheflush.h> #ifdef CONFIG_PPC64 #include "ppc32.h" -#include <asm/ppcdebug.h> #include <asm/unistd.h> #include <asm/vdso.h> #else diff --git a/arch/powerpc/kernel/signal_64.c b/arch/powerpc/kernel/signal_64.c index ec9d0984b6a..58194e15071 100644 --- a/arch/powerpc/kernel/signal_64.c +++ b/arch/powerpc/kernel/signal_64.c @@ -33,7 +33,6 @@ #include <asm/ucontext.h> #include <asm/uaccess.h> #include <asm/pgtable.h> -#include <asm/ppcdebug.h> #include <asm/unistd.h> #include <asm/cacheflush.h> #include <asm/vdso.h> diff --git a/arch/powerpc/kernel/smp.c b/arch/powerpc/kernel/smp.c index 1794a694a92..5c330c3366e 100644 --- a/arch/powerpc/kernel/smp.c +++ b/arch/powerpc/kernel/smp.c @@ -40,7 +40,6 @@ #include <asm/prom.h> #include <asm/smp.h> #include <asm/time.h> -#include <asm/xmon.h> #include <asm/machdep.h> #include <asm/cputable.h> #include <asm/system.h> diff --git a/arch/powerpc/kernel/time.c b/arch/powerpc/kernel/time.c index 6996a593dcb..a6282b625b4 100644 --- a/arch/powerpc/kernel/time.c +++ b/arch/powerpc/kernel/time.c @@ -61,6 +61,7 @@ #include <asm/prom.h> #include <asm/irq.h> #include <asm/div64.h> +#include <asm/smp.h> #ifdef CONFIG_PPC64 #include <asm/systemcfg.h> #include <asm/firmware.h> @@ -69,6 +70,7 @@ #include <asm/iseries/it_lp_queue.h> #include <asm/iseries/hv_call_xm.h> #endif +#include <asm/smp.h> /* keep track of when we need to update the rtc */ time_t last_rtc_update; @@ -118,10 +120,6 @@ static unsigned adjusting_time = 0; unsigned long ppc_proc_freq; unsigned long ppc_tb_freq; -#ifdef CONFIG_PPC32 /* XXX for now */ -#define boot_cpuid 0 -#endif - u64 tb_last_jiffy __cacheline_aligned_in_smp; unsigned long tb_last_stamp; diff --git a/arch/powerpc/kernel/traps.c b/arch/powerpc/kernel/traps.c index 07e5ee40b87..32f215825e8 100644 --- a/arch/powerpc/kernel/traps.c +++ b/arch/powerpc/kernel/traps.c @@ -39,7 +39,6 @@ #include <asm/io.h> #include <asm/machdep.h> #include <asm/rtas.h> -#include <asm/xmon.h> #include <asm/pmc.h> #ifdef CONFIG_PPC32 #include <asm/reg.h> @@ -748,22 +747,12 @@ static int check_bug_trap(struct pt_regs *regs) return 0; if (bug->line & BUG_WARNING_TRAP) { /* this is a WARN_ON rather than BUG/BUG_ON */ -#ifdef CONFIG_XMON - xmon_printf(KERN_ERR "Badness in %s at %s:%ld\n", - bug->function, bug->file, - bug->line & ~BUG_WARNING_TRAP); -#endif /* CONFIG_XMON */ printk(KERN_ERR "Badness in %s at %s:%ld\n", bug->function, bug->file, bug->line & ~BUG_WARNING_TRAP); dump_stack(); return 1; } -#ifdef CONFIG_XMON - xmon_printf(KERN_CRIT "kernel BUG in %s at %s:%ld!\n", - bug->function, bug->file, bug->line); - xmon(regs); -#endif /* CONFIG_XMON */ printk(KERN_CRIT "kernel BUG in %s at %s:%ld!\n", bug->function, bug->file, bug->line); diff --git a/arch/powerpc/lib/locks.c b/arch/powerpc/lib/locks.c index 2a912f411eb..35bd03c41dd 100644 --- a/arch/powerpc/lib/locks.c +++ b/arch/powerpc/lib/locks.c @@ -23,6 +23,7 @@ #if defined(CONFIG_PPC_SPLPAR) || defined(CONFIG_PPC_ISERIES) #include <asm/hvcall.h> #include <asm/iseries/hv_call.h> +#include <asm/smp.h> void __spin_yield(raw_spinlock_t *lock) { diff --git a/arch/powerpc/mm/fault.c b/arch/powerpc/mm/fault.c index 841d8b6323a..93d4fbfdb72 100644 --- a/arch/powerpc/mm/fault.c +++ b/arch/powerpc/mm/fault.c @@ -389,5 +389,22 @@ void bad_page_fault(struct pt_regs *regs, unsigned long address, int sig) } /* kernel has accessed a bad area */ + + printk(KERN_ALERT "Unable to handle kernel paging request for "); + switch (regs->trap) { + case 0x300: + case 0x380: + printk("data at address 0x%08lx\n", regs->dar); + break; + case 0x400: + case 0x480: + printk("instruction fetch\n"); + break; + default: + printk("unknown fault\n"); + } + printk(KERN_ALERT "Faulting instruction address: 0x%08lx\n", + regs->nip); + die("Kernel access of bad area", regs, sig); } diff --git a/arch/powerpc/mm/hash_utils_64.c b/arch/powerpc/mm/hash_utils_64.c index b2f3dbca695..22e47487613 100644 --- a/arch/powerpc/mm/hash_utils_64.c +++ b/arch/powerpc/mm/hash_utils_64.c @@ -33,7 +33,6 @@ #include <linux/init.h> #include <linux/signal.h> -#include <asm/ppcdebug.h> #include <asm/processor.h> #include <asm/pgtable.h> #include <asm/mmu.h> @@ -329,12 +328,14 @@ static void __init htab_init_page_sizes(void) */ if (mmu_psize_defs[MMU_PAGE_16M].shift) mmu_huge_psize = MMU_PAGE_16M; + /* With 4k/4level pagetables, we can't (for now) cope with a + * huge page size < PMD_SIZE */ else if (mmu_psize_defs[MMU_PAGE_1M].shift) mmu_huge_psize = MMU_PAGE_1M; /* Calculate HPAGE_SHIFT and sanity check it */ - if (mmu_psize_defs[mmu_huge_psize].shift > 16 && - mmu_psize_defs[mmu_huge_psize].shift < 28) + if (mmu_psize_defs[mmu_huge_psize].shift > MIN_HUGEPTE_SHIFT && + mmu_psize_defs[mmu_huge_psize].shift < SID_SHIFT) HPAGE_SHIFT = mmu_psize_defs[mmu_huge_psize].shift; else HPAGE_SHIFT = 0; /* No huge pages dude ! */ @@ -407,12 +408,6 @@ void __init htab_initialize(void) htab_size_bytes = htab_get_table_size(); pteg_count = htab_size_bytes >> 7; - /* For debug, make the HTAB 1/8 as big as it normally would be. */ - ifppcdebug(PPCDBG_HTABSIZE) { - pteg_count >>= 3; - htab_size_bytes = pteg_count << 7; - } - htab_hash_mask = pteg_count - 1; if (systemcfg->platform & PLATFORM_LPAR) { @@ -512,6 +507,9 @@ unsigned int hash_page_do_lazy_icache(unsigned int pp, pte_t pte, int trap) { struct page *page; + if (!pfn_valid(pte_pfn(pte))) + return pp; + page = pte_page(pte); /* page is dirty */ diff --git a/arch/powerpc/mm/hugetlbpage.c b/arch/powerpc/mm/hugetlbpage.c index 0073a04047e..426c269e552 100644 --- a/arch/powerpc/mm/hugetlbpage.c +++ b/arch/powerpc/mm/hugetlbpage.c @@ -212,6 +212,12 @@ static int prepare_high_area_for_htlb(struct mm_struct *mm, unsigned long area) BUG_ON(area >= NUM_HIGH_AREAS); + /* Hack, so that each addresses is controlled by exactly one + * of the high or low area bitmaps, the first high area starts + * at 4GB, not 0 */ + if (start == 0) + start = 0x100000000UL; + /* Check no VMAs are in the region */ vma = find_vma(mm, start); if (vma && (vma->vm_start < end)) diff --git a/arch/powerpc/mm/init_64.c b/arch/powerpc/mm/init_64.c index dfe7fa37b41..ce974c83d88 100644 --- a/arch/powerpc/mm/init_64.c +++ b/arch/powerpc/mm/init_64.c @@ -57,7 +57,6 @@ #include <asm/processor.h> #include <asm/mmzone.h> #include <asm/cputable.h> -#include <asm/ppcdebug.h> #include <asm/sections.h> #include <asm/system.h> #include <asm/iommu.h> diff --git a/arch/powerpc/mm/mem.c b/arch/powerpc/mm/mem.c index 7faa46b71f2..6f55efd9be9 100644 --- a/arch/powerpc/mm/mem.c +++ b/arch/powerpc/mm/mem.c @@ -358,7 +358,7 @@ void __init mem_init(void) } codesize = (unsigned long)&_sdata - (unsigned long)&_stext; - datasize = (unsigned long)&__init_begin - (unsigned long)&_sdata; + datasize = (unsigned long)&_edata - (unsigned long)&_sdata; initsize = (unsigned long)&__init_end - (unsigned long)&__init_begin; bsssize = (unsigned long)&__bss_stop - (unsigned long)&__bss_start; diff --git a/arch/powerpc/mm/numa.c b/arch/powerpc/mm/numa.c index 4035cad8d7f..da09ba03c42 100644 --- a/arch/powerpc/mm/numa.c +++ b/arch/powerpc/mm/numa.c @@ -21,6 +21,7 @@ #include <asm/machdep.h> #include <asm/abs_addr.h> #include <asm/system.h> +#include <asm/smp.h> static int numa_enabled = 1; diff --git a/arch/powerpc/mm/pgtable_64.c b/arch/powerpc/mm/pgtable_64.c index 51b78694097..900842451bd 100644 --- a/arch/powerpc/mm/pgtable_64.c +++ b/arch/powerpc/mm/pgtable_64.c @@ -59,7 +59,6 @@ #include <asm/processor.h> #include <asm/mmzone.h> #include <asm/cputable.h> -#include <asm/ppcdebug.h> #include <asm/sections.h> #include <asm/system.h> #include <asm/iommu.h> diff --git a/arch/powerpc/mm/ppc_mmu_32.c b/arch/powerpc/mm/ppc_mmu_32.c index d137abd241f..ed7fcfe5fd3 100644 --- a/arch/powerpc/mm/ppc_mmu_32.c +++ b/arch/powerpc/mm/ppc_mmu_32.c @@ -188,9 +188,9 @@ void hash_preload(struct mm_struct *mm, unsigned long ea, if (Hash == 0) return; - pmd = pmd_offset(pgd_offset(vma->vm_mm, address), address); + pmd = pmd_offset(pgd_offset(mm, ea), ea); if (!pmd_none(*pmd)) - add_hash_page(vma->vm_mm->context, address, pmd_val(*pmd)); + add_hash_page(mm->context, ea, pmd_val(*pmd)); } /* diff --git a/arch/powerpc/mm/slb_low.S b/arch/powerpc/mm/slb_low.S index 3e18241b6f3..950ffc5848c 100644 --- a/arch/powerpc/mm/slb_low.S +++ b/arch/powerpc/mm/slb_low.S @@ -80,12 +80,17 @@ _GLOBAL(slb_miss_kernel_load_virtual) BEGIN_FTR_SECTION b 1f END_FTR_SECTION_IFCLR(CPU_FTR_16M_PAGE) + cmpldi r10,16 + + lhz r9,PACALOWHTLBAREAS(r13) + mr r11,r10 + blt 5f + lhz r9,PACAHIGHHTLBAREAS(r13) srdi r11,r10,(HTLB_AREA_SHIFT-SID_SHIFT) - srd r9,r9,r11 - lhz r11,PACALOWHTLBAREAS(r13) - srd r11,r11,r10 - or. r9,r9,r11 + +5: srd r9,r9,r11 + andi. r9,r9,1 beq 1f _GLOBAL(slb_miss_user_load_huge) li r11,0 diff --git a/arch/powerpc/oprofile/Kconfig b/arch/powerpc/oprofile/Kconfig index 19d37730b66..eb2dece76a5 100644 --- a/arch/powerpc/oprofile/Kconfig +++ b/arch/powerpc/oprofile/Kconfig @@ -1,7 +1,3 @@ - -menu "Profiling support" - depends on EXPERIMENTAL - config PROFILING bool "Profiling support (EXPERIMENTAL)" help @@ -19,5 +15,3 @@ config OPROFILE If unsure, say N. -endmenu - diff --git a/arch/powerpc/oprofile/op_model_power4.c b/arch/powerpc/oprofile/op_model_power4.c index 88644931584..c4ee5478427 100644 --- a/arch/powerpc/oprofile/op_model_power4.c +++ b/arch/powerpc/oprofile/op_model_power4.c @@ -17,6 +17,7 @@ #include <asm/systemcfg.h> #include <asm/rtas.h> #include <asm/oprofile_impl.h> +#include <asm/reg.h> #define dbg(args...) @@ -81,6 +82,26 @@ static void power4_reg_setup(struct op_counter_config *ctr, extern void ppc64_enable_pmcs(void); +/* + * Older CPUs require the MMCRA sample bit to be always set, but newer + * CPUs only want it set for some groups. Eventually we will remove all + * knowledge of this bit in the kernel, oprofile userspace should be + * setting it when required. + * + * In order to keep current installations working we force the bit for + * those older CPUs. Once everyone has updated their oprofile userspace we + * can remove this hack. + */ +static inline int mmcra_must_set_sample(void) +{ + if (__is_processor(PV_POWER4) || __is_processor(PV_POWER4p) || + __is_processor(PV_970) || __is_processor(PV_970FX) || + __is_processor(PV_970MP)) + return 1; + + return 0; +} + static void power4_cpu_setup(void *unused) { unsigned int mmcr0 = mmcr0_val; @@ -98,7 +119,8 @@ static void power4_cpu_setup(void *unused) mtspr(SPRN_MMCR1, mmcr1_val); - mmcra |= MMCRA_SAMPLE_ENABLE; + if (mmcra_must_set_sample()) + mmcra |= MMCRA_SAMPLE_ENABLE; mtspr(SPRN_MMCRA, mmcra); dbg("setup on cpu %d, mmcr0 %lx\n", smp_processor_id(), diff --git a/arch/powerpc/platforms/iseries/irq.c b/arch/powerpc/platforms/iseries/irq.c index c1135912cc0..a06603d84a4 100644 --- a/arch/powerpc/platforms/iseries/irq.c +++ b/arch/powerpc/platforms/iseries/irq.c @@ -35,7 +35,6 @@ #include <linux/irq.h> #include <linux/spinlock.h> -#include <asm/ppcdebug.h> #include <asm/iseries/hv_types.h> #include <asm/iseries/hv_lp_event.h> #include <asm/iseries/hv_call_xm.h> @@ -227,8 +226,6 @@ static void iSeries_enable_IRQ(unsigned int irq) /* Unmask secondary INTA */ mask = 0x80000000; HvCallPci_unmaskInterrupts(bus, subBus, deviceId, mask); - PPCDBG(PPCDBG_BUSWALK, "iSeries_enable_IRQ 0x%02X.%02X.%02X 0x%04X\n", - bus, subBus, deviceId, irq); } /* This is called by iSeries_activate_IRQs */ @@ -310,8 +307,6 @@ static void iSeries_disable_IRQ(unsigned int irq) /* Mask secondary INTA */ mask = 0x80000000; HvCallPci_maskInterrupts(bus, subBus, deviceId, mask); - PPCDBG(PPCDBG_BUSWALK, "iSeries_disable_IRQ 0x%02X.%02X.%02X 0x%04X\n", - bus, subBus, deviceId, irq); } /* diff --git a/arch/powerpc/platforms/iseries/pci.c b/arch/powerpc/platforms/iseries/pci.c index 7d7d5884343..4b75131773a 100644 --- a/arch/powerpc/platforms/iseries/pci.c +++ b/arch/powerpc/platforms/iseries/pci.c @@ -32,7 +32,6 @@ #include <asm/prom.h> #include <asm/machdep.h> #include <asm/pci-bridge.h> -#include <asm/ppcdebug.h> #include <asm/iommu.h> #include <asm/abs_addr.h> @@ -207,10 +206,6 @@ static struct device_node *build_device_node(HvBusNumber Bus, struct device_node *node; struct pci_dn *pdn; - PPCDBG(PPCDBG_BUSWALK, - "-build_device_node 0x%02X.%02X.%02X Function: %02X\n", - Bus, SubBus, AgentId, Function); - node = kmalloc(sizeof(struct device_node), GFP_KERNEL); if (node == NULL) return NULL; @@ -243,8 +238,6 @@ unsigned long __init find_and_init_phbs(void) struct pci_controller *phb; HvBusNumber bus; - PPCDBG(PPCDBG_BUSWALK, "find_and_init_phbs Entry\n"); - /* Check all possible buses. */ for (bus = 0; bus < 256; bus++) { int ret = HvCallXm_testBus(bus); @@ -261,9 +254,6 @@ unsigned long __init find_and_init_phbs(void) phb->last_busno = bus; phb->ops = &iSeries_pci_ops; - PPCDBG(PPCDBG_BUSWALK, "PCI:Create iSeries pci_controller(%p), Bus: %04X\n", - phb, bus); - /* Find and connect the devices. */ scan_PHB_slots(phb); } @@ -285,11 +275,9 @@ unsigned long __init find_and_init_phbs(void) */ void iSeries_pcibios_init(void) { - PPCDBG(PPCDBG_BUSWALK, "iSeries_pcibios_init Entry.\n"); iomm_table_initialize(); find_and_init_phbs(); io_page_mask = -1; - PPCDBG(PPCDBG_BUSWALK, "iSeries_pcibios_init Exit.\n"); } /* @@ -301,8 +289,6 @@ void __init iSeries_pci_final_fixup(void) struct device_node *node; int DeviceCount = 0; - PPCDBG(PPCDBG_BUSWALK, "iSeries_pcibios_fixup Entry.\n"); - /* Fix up at the device node and pci_dev relationship */ mf_display_src(0xC9000100); @@ -316,9 +302,6 @@ void __init iSeries_pci_final_fixup(void) ++DeviceCount; pdev->sysdata = (void *)node; PCI_DN(node)->pcidev = pdev; - PPCDBG(PPCDBG_BUSWALK, - "pdev 0x%p <==> DevNode 0x%p\n", - pdev, node); allocate_device_bars(pdev); iSeries_Device_Information(pdev, DeviceCount); iommu_devnode_init_iSeries(node); @@ -333,13 +316,10 @@ void __init iSeries_pci_final_fixup(void) void pcibios_fixup_bus(struct pci_bus *PciBus) { - PPCDBG(PPCDBG_BUSWALK, "iSeries_pcibios_fixup_bus(0x%04X) Entry.\n", - PciBus->number); } void pcibios_fixup_resources(struct pci_dev *pdev) { - PPCDBG(PPCDBG_BUSWALK, "fixup_resources pdev %p\n", pdev); } /* @@ -401,9 +381,6 @@ static void scan_EADS_bridge(HvBusNumber bus, HvSubBusNumber SubBus, printk("found device at bus %d idsel %d func %d (AgentId %x)\n", bus, IdSel, Function, AgentId); /* Connect EADs: 0x18.00.12 = 0x00 */ - PPCDBG(PPCDBG_BUSWALK, - "PCI:Connect EADs: 0x%02X.%02X.%02X\n", - bus, SubBus, AgentId); HvRc = HvCallPci_getBusUnitInfo(bus, SubBus, AgentId, iseries_hv_addr(BridgeInfo), sizeof(struct HvCallPci_BridgeInfo)); @@ -414,14 +391,6 @@ static void scan_EADS_bridge(HvBusNumber bus, HvSubBusNumber SubBus, BridgeInfo->maxAgents, BridgeInfo->maxSubBusNumber, BridgeInfo->logicalSlotNumber); - PPCDBG(PPCDBG_BUSWALK, - "PCI: BridgeInfo, Type:0x%02X, SubBus:0x%02X, MaxAgents:0x%02X, MaxSubBus: 0x%02X, LSlot: 0x%02X\n", - BridgeInfo->busUnitInfo.deviceType, - BridgeInfo->subBusNumber, - BridgeInfo->maxAgents, - BridgeInfo->maxSubBusNumber, - BridgeInfo->logicalSlotNumber); - if (BridgeInfo->busUnitInfo.deviceType == HvCallPci_BridgeDevice) { /* Scan_Bridge_Slot...: 0x18.00.12 */ @@ -454,9 +423,6 @@ static int scan_bridge_slot(HvBusNumber Bus, /* iSeries_allocate_IRQ.: 0x18.00.12(0xA3) */ Irq = iSeries_allocate_IRQ(Bus, 0, EADsIdSel); - PPCDBG(PPCDBG_BUSWALK, - "PCI:- allocate and assign IRQ 0x%02X.%02X.%02X = 0x%02X\n", - Bus, 0, EADsIdSel, Irq); /* * Connect all functions of any device found. @@ -482,9 +448,6 @@ static int scan_bridge_slot(HvBusNumber Bus, printk("read vendor ID: %x\n", VendorId); /* FoundDevice: 0x18.28.10 = 0x12AE */ - PPCDBG(PPCDBG_BUSWALK, - "PCI:- FoundDevice: 0x%02X.%02X.%02X = 0x%04X, irq %d\n", - Bus, SubBus, AgentId, VendorId, Irq); HvRc = HvCallPci_configStore8(Bus, SubBus, AgentId, PCI_INTERRUPT_LINE, Irq); if (HvRc != 0) diff --git a/arch/powerpc/platforms/iseries/setup.c b/arch/powerpc/platforms/iseries/setup.c index c5207064977..d3e4bf756c8 100644 --- a/arch/powerpc/platforms/iseries/setup.c +++ b/arch/powerpc/platforms/iseries/setup.c @@ -71,8 +71,6 @@ extern void hvlog(char *fmt, ...); #endif /* Function Prototypes */ -extern void ppcdbg_initialize(void); - static void build_iSeries_Memory_Map(void); static void iseries_shared_idle(void); static void iseries_dedicated_idle(void); @@ -309,8 +307,6 @@ static void __init iSeries_init_early(void) ppc64_firmware_features = FW_FEATURE_ISERIES; - ppcdbg_initialize(); - ppc64_interrupt_controller = IC_ISERIES; #if defined(CONFIG_BLK_DEV_INITRD) diff --git a/arch/powerpc/platforms/iseries/smp.c b/arch/powerpc/platforms/iseries/smp.c index 3336bad6772..fcb094ec6ae 100644 --- a/arch/powerpc/platforms/iseries/smp.c +++ b/arch/powerpc/platforms/iseries/smp.c @@ -40,7 +40,6 @@ #include <asm/paca.h> #include <asm/iseries/hv_call.h> #include <asm/time.h> -#include <asm/ppcdebug.h> #include <asm/machdep.h> #include <asm/cputable.h> #include <asm/system.h> diff --git a/arch/powerpc/platforms/powermac/Makefile b/arch/powerpc/platforms/powermac/Makefile index 4369676f1d5..c9df44fcf57 100644 --- a/arch/powerpc/platforms/powermac/Makefile +++ b/arch/powerpc/platforms/powermac/Makefile @@ -1,7 +1,8 @@ obj-y += pic.o setup.o time.o feature.o pci.o \ sleep.o low_i2c.o cache.o obj-$(CONFIG_PMAC_BACKLIGHT) += backlight.o -obj-$(CONFIG_CPU_FREQ_PMAC) += cpufreq.o +obj-$(CONFIG_CPU_FREQ_PMAC) += cpufreq_32.o +obj-$(CONFIG_CPU_FREQ_PMAC64) += cpufreq_64.o obj-$(CONFIG_NVRAM) += nvram.o # ppc64 pmac doesn't define CONFIG_NVRAM but needs nvram stuff obj-$(CONFIG_PPC64) += nvram.o diff --git a/arch/powerpc/platforms/powermac/cpufreq.c b/arch/powerpc/platforms/powermac/cpufreq_32.c index c47f8b69725..56fd4e05fed 100644 --- a/arch/powerpc/platforms/powermac/cpufreq.c +++ b/arch/powerpc/platforms/powermac/cpufreq_32.c @@ -397,18 +397,16 @@ static int pmac_cpufreq_target( struct cpufreq_policy *policy, unsigned int relation) { unsigned int newstate = 0; + int rc; if (cpufreq_frequency_table_target(policy, pmac_cpu_freqs, target_freq, relation, &newstate)) return -EINVAL; - return do_set_cpu_speed(newstate, 1); -} + rc = do_set_cpu_speed(newstate, 1); -unsigned int pmac_get_one_cpufreq(int i) -{ - /* Supports only one CPU for now */ - return (i == 0) ? cur_freq : 0; + ppc_proc_freq = cur_freq * 1000ul; + return rc; } static int pmac_cpufreq_cpu_init(struct cpufreq_policy *policy) @@ -474,6 +472,8 @@ static int pmac_cpufreq_resume(struct cpufreq_policy *policy) do_set_cpu_speed(sleep_freq == low_freq ? CPUFREQ_LOW : CPUFREQ_HIGH, 0); + ppc_proc_freq = cur_freq * 1000ul; + no_schedule = 0; return 0; } @@ -547,7 +547,7 @@ static int pmac_cpufreq_init_MacRISC3(struct device_node *cpunode) */ if (low_freq < 98000000) low_freq = 101000000; - + /* Convert those to CPU core clocks */ low_freq = (low_freq * (*ratio)) / 2000; hi_freq = (hi_freq * (*ratio)) / 2000; @@ -714,6 +714,7 @@ out: pmac_cpu_freqs[CPUFREQ_LOW].frequency = low_freq; pmac_cpu_freqs[CPUFREQ_HIGH].frequency = hi_freq; + ppc_proc_freq = cur_freq * 1000ul; printk(KERN_INFO "Registering PowerMac CPU frequency driver\n"); printk(KERN_INFO "Low: %d Mhz, High: %d Mhz, Boot: %d Mhz\n", diff --git a/arch/powerpc/platforms/powermac/cpufreq_64.c b/arch/powerpc/platforms/powermac/cpufreq_64.c new file mode 100644 index 00000000000..39150342c6f --- /dev/null +++ b/arch/powerpc/platforms/powermac/cpufreq_64.c @@ -0,0 +1,323 @@ +/* + * Copyright (C) 2002 - 2005 Benjamin Herrenschmidt <benh@kernel.crashing.org> + * and Markus Demleitner <msdemlei@cl.uni-heidelberg.de> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + * This driver adds basic cpufreq support for SMU & 970FX based G5 Macs, + * that is iMac G5 and latest single CPU desktop. + */ + +#include <linux/config.h> +#include <linux/module.h> +#include <linux/types.h> +#include <linux/errno.h> +#include <linux/kernel.h> +#include <linux/delay.h> +#include <linux/sched.h> +#include <linux/slab.h> +#include <linux/cpufreq.h> +#include <linux/init.h> +#include <linux/completion.h> +#include <asm/prom.h> +#include <asm/machdep.h> +#include <asm/irq.h> +#include <asm/sections.h> +#include <asm/cputable.h> +#include <asm/time.h> +#include <asm/smu.h> + +#undef DEBUG + +#ifdef DEBUG +#define DBG(fmt...) printk(fmt) +#else +#define DBG(fmt...) +#endif + +/* see 970FX user manual */ + +#define SCOM_PCR 0x0aa001 /* PCR scom addr */ + +#define PCR_HILO_SELECT 0x80000000U /* 1 = PCR, 0 = PCRH */ +#define PCR_SPEED_FULL 0x00000000U /* 1:1 speed value */ +#define PCR_SPEED_HALF 0x00020000U /* 1:2 speed value */ +#define PCR_SPEED_QUARTER 0x00040000U /* 1:4 speed value */ +#define PCR_SPEED_MASK 0x000e0000U /* speed mask */ +#define PCR_SPEED_SHIFT 17 +#define PCR_FREQ_REQ_VALID 0x00010000U /* freq request valid */ +#define PCR_VOLT_REQ_VALID 0x00008000U /* volt request valid */ +#define PCR_TARGET_TIME_MASK 0x00006000U /* target time */ +#define PCR_STATLAT_MASK 0x00001f00U /* STATLAT value */ +#define PCR_SNOOPLAT_MASK 0x000000f0U /* SNOOPLAT value */ +#define PCR_SNOOPACC_MASK 0x0000000fU /* SNOOPACC value */ + +#define SCOM_PSR 0x408001 /* PSR scom addr */ +/* warning: PSR is a 64 bits register */ +#define PSR_CMD_RECEIVED 0x2000000000000000U /* command received */ +#define PSR_CMD_COMPLETED 0x1000000000000000U /* command completed */ +#define PSR_CUR_SPEED_MASK 0x0300000000000000U /* current speed */ +#define PSR_CUR_SPEED_SHIFT (56) + +/* + * The G5 only supports two frequencies (Quarter speed is not supported) + */ +#define CPUFREQ_HIGH 0 +#define CPUFREQ_LOW 1 + +static struct cpufreq_frequency_table g5_cpu_freqs[] = { + {CPUFREQ_HIGH, 0}, + {CPUFREQ_LOW, 0}, + {0, CPUFREQ_TABLE_END}, +}; + +static struct freq_attr* g5_cpu_freqs_attr[] = { + &cpufreq_freq_attr_scaling_available_freqs, + NULL, +}; + +/* Power mode data is an array of the 32 bits PCR values to use for + * the various frequencies, retreived from the device-tree + */ +static u32 *g5_pmode_data; +static int g5_pmode_max; +static int g5_pmode_cur; + +static DECLARE_MUTEX(g5_switch_mutex); + + +static struct smu_sdbp_fvt *g5_fvt_table; /* table of op. points */ +static int g5_fvt_count; /* number of op. points */ +static int g5_fvt_cur; /* current op. point */ + +/* ----------------- real hardware interface */ + +static void g5_switch_volt(int speed_mode) +{ + struct smu_simple_cmd cmd; + + DECLARE_COMPLETION(comp); + smu_queue_simple(&cmd, SMU_CMD_POWER_COMMAND, 8, smu_done_complete, + &comp, 'V', 'S', 'L', 'E', 'W', + 0xff, g5_fvt_cur+1, speed_mode); + wait_for_completion(&comp); +} + +static int g5_switch_freq(int speed_mode) +{ + struct cpufreq_freqs freqs; + int to; + + if (g5_pmode_cur == speed_mode) + return 0; + + down(&g5_switch_mutex); + + freqs.old = g5_cpu_freqs[g5_pmode_cur].frequency; + freqs.new = g5_cpu_freqs[speed_mode].frequency; + freqs.cpu = 0; + + cpufreq_notify_transition(&freqs, CPUFREQ_PRECHANGE); + + /* If frequency is going up, first ramp up the voltage */ + if (speed_mode < g5_pmode_cur) + g5_switch_volt(speed_mode); + + /* Clear PCR high */ + scom970_write(SCOM_PCR, 0); + /* Clear PCR low */ + scom970_write(SCOM_PCR, PCR_HILO_SELECT | 0); + /* Set PCR low */ + scom970_write(SCOM_PCR, PCR_HILO_SELECT | + g5_pmode_data[speed_mode]); + + /* Wait for completion */ + for (to = 0; to < 10; to++) { + unsigned long psr = scom970_read(SCOM_PSR); + + if ((psr & PSR_CMD_RECEIVED) == 0 && + (((psr >> PSR_CUR_SPEED_SHIFT) ^ + (g5_pmode_data[speed_mode] >> PCR_SPEED_SHIFT)) & 0x3) + == 0) + break; + if (psr & PSR_CMD_COMPLETED) + break; + udelay(100); + } + + /* If frequency is going down, last ramp the voltage */ + if (speed_mode > g5_pmode_cur) + g5_switch_volt(speed_mode); + + g5_pmode_cur = speed_mode; + ppc_proc_freq = g5_cpu_freqs[speed_mode].frequency * 1000ul; + + cpufreq_notify_transition(&freqs, CPUFREQ_POSTCHANGE); + + up(&g5_switch_mutex); + + return 0; +} + +static int g5_query_freq(void) +{ + unsigned long psr = scom970_read(SCOM_PSR); + int i; + + for (i = 0; i <= g5_pmode_max; i++) + if ((((psr >> PSR_CUR_SPEED_SHIFT) ^ + (g5_pmode_data[i] >> PCR_SPEED_SHIFT)) & 0x3) == 0) + break; + return i; +} + +/* ----------------- cpufreq bookkeeping */ + +static int g5_cpufreq_verify(struct cpufreq_policy *policy) +{ + return cpufreq_frequency_table_verify(policy, g5_cpu_freqs); +} + +static int g5_cpufreq_target(struct cpufreq_policy *policy, + unsigned int target_freq, unsigned int relation) +{ + unsigned int newstate = 0; + + if (cpufreq_frequency_table_target(policy, g5_cpu_freqs, + target_freq, relation, &newstate)) + return -EINVAL; + + return g5_switch_freq(newstate); +} + +static unsigned int g5_cpufreq_get_speed(unsigned int cpu) +{ + return g5_cpu_freqs[g5_pmode_cur].frequency; +} + +static int g5_cpufreq_cpu_init(struct cpufreq_policy *policy) +{ + if (policy->cpu != 0) + return -ENODEV; + + policy->governor = CPUFREQ_DEFAULT_GOVERNOR; + policy->cpuinfo.transition_latency = CPUFREQ_ETERNAL; + policy->cur = g5_cpu_freqs[g5_query_freq()].frequency; + cpufreq_frequency_table_get_attr(g5_cpu_freqs, policy->cpu); + + return cpufreq_frequency_table_cpuinfo(policy, + g5_cpu_freqs); +} + + +static struct cpufreq_driver g5_cpufreq_driver = { + .name = "powermac", + .owner = THIS_MODULE, + .flags = CPUFREQ_CONST_LOOPS, + .init = g5_cpufreq_cpu_init, + .verify = g5_cpufreq_verify, + .target = g5_cpufreq_target, + .get = g5_cpufreq_get_speed, + .attr = g5_cpu_freqs_attr, +}; + + +static int __init g5_cpufreq_init(void) +{ + struct device_node *cpunode; + unsigned int psize, ssize; + struct smu_sdbp_header *shdr; + unsigned long max_freq; + u32 *valp; + int rc = -ENODEV; + + /* Look for CPU and SMU nodes */ + cpunode = of_find_node_by_type(NULL, "cpu"); + if (!cpunode) { + DBG("No CPU node !\n"); + return -ENODEV; + } + + /* Check 970FX for now */ + valp = (u32 *)get_property(cpunode, "cpu-version", NULL); + if (!valp) { + DBG("No cpu-version property !\n"); + goto bail_noprops; + } + if (((*valp) >> 16) != 0x3c) { + DBG("Wrong CPU version: %08x\n", *valp); + goto bail_noprops; + } + + /* Look for the powertune data in the device-tree */ + g5_pmode_data = (u32 *)get_property(cpunode, "power-mode-data",&psize); + if (!g5_pmode_data) { + DBG("No power-mode-data !\n"); + goto bail_noprops; + } + g5_pmode_max = psize / sizeof(u32) - 1; + + /* Look for the FVT table */ + shdr = smu_get_sdb_partition(SMU_SDB_FVT_ID, NULL); + if (!shdr) + goto bail_noprops; + g5_fvt_table = (struct smu_sdbp_fvt *)&shdr[1]; + ssize = (shdr->len * sizeof(u32)) - sizeof(struct smu_sdbp_header); + g5_fvt_count = ssize / sizeof(struct smu_sdbp_fvt); + g5_fvt_cur = 0; + + /* Sanity checking */ + if (g5_fvt_count < 1 || g5_pmode_max < 1) + goto bail_noprops; + + /* + * From what I see, clock-frequency is always the maximal frequency. + * The current driver can not slew sysclk yet, so we really only deal + * with powertune steps for now. We also only implement full freq and + * half freq in this version. So far, I haven't yet seen a machine + * supporting anything else. + */ + valp = (u32 *)get_property(cpunode, "clock-frequency", NULL); + if (!valp) + return -ENODEV; + max_freq = (*valp)/1000; + g5_cpu_freqs[0].frequency = max_freq; + g5_cpu_freqs[1].frequency = max_freq/2; + + /* Check current frequency */ + g5_pmode_cur = g5_query_freq(); + if (g5_pmode_cur > 1) + /* We don't support anything but 1:1 and 1:2, fixup ... */ + g5_pmode_cur = 1; + + /* Force apply current frequency to make sure everything is in + * sync (voltage is right for example). Firmware may leave us with + * a strange setting ... + */ + g5_switch_freq(g5_pmode_cur); + + printk(KERN_INFO "Registering G5 CPU frequency driver\n"); + printk(KERN_INFO "Low: %d Mhz, High: %d Mhz, Cur: %d MHz\n", + g5_cpu_freqs[1].frequency/1000, + g5_cpu_freqs[0].frequency/1000, + g5_cpu_freqs[g5_pmode_cur].frequency/1000); + + rc = cpufreq_register_driver(&g5_cpufreq_driver); + + /* We keep the CPU node on hold... hopefully, Apple G5 don't have + * hotplug CPU with a dynamic device-tree ... + */ + return rc; + + bail_noprops: + of_node_put(cpunode); + + return rc; +} + +module_init(g5_cpufreq_init); + + +MODULE_LICENSE("GPL"); diff --git a/arch/powerpc/platforms/powermac/setup.c b/arch/powerpc/platforms/powermac/setup.c index 80b58c1ec41..7acb0546671 100644 --- a/arch/powerpc/platforms/powermac/setup.c +++ b/arch/powerpc/platforms/powermac/setup.c @@ -193,18 +193,6 @@ static void pmac_show_cpuinfo(struct seq_file *m) pmac_newworld ? "NewWorld" : "OldWorld"); } -static void pmac_show_percpuinfo(struct seq_file *m, int i) -{ -#ifdef CONFIG_CPU_FREQ_PMAC - extern unsigned int pmac_get_one_cpufreq(int i); - unsigned int freq = pmac_get_one_cpufreq(i); - if (freq != 0) { - seq_printf(m, "clock\t\t: %dMHz\n", freq/1000); - return; - } -#endif /* CONFIG_CPU_FREQ_PMAC */ -} - #ifndef CONFIG_ADB_CUDA int find_via_cuda(void) { @@ -767,7 +755,6 @@ struct machdep_calls __initdata pmac_md = { .setup_arch = pmac_setup_arch, .init_early = pmac_init_early, .show_cpuinfo = pmac_show_cpuinfo, - .show_percpuinfo = pmac_show_percpuinfo, .init_IRQ = pmac_pic_init, .get_irq = mpic_get_irq, /* changed later */ .pcibios_fixup = pmac_pcibios_fixup, diff --git a/arch/powerpc/platforms/pseries/iommu.c b/arch/powerpc/platforms/pseries/iommu.c index 513e2723149..fcc50bfd43f 100644 --- a/arch/powerpc/platforms/pseries/iommu.c +++ b/arch/powerpc/platforms/pseries/iommu.c @@ -37,7 +37,6 @@ #include <asm/io.h> #include <asm/prom.h> #include <asm/rtas.h> -#include <asm/ppcdebug.h> #include <asm/iommu.h> #include <asm/pci-bridge.h> #include <asm/machdep.h> @@ -47,6 +46,7 @@ #include <asm/firmware.h> #include <asm/tce.h> #include <asm/ppc-pci.h> +#include <asm/udbg.h> #include "plpar_wrappers.h" diff --git a/arch/powerpc/platforms/pseries/lpar.c b/arch/powerpc/platforms/pseries/lpar.c index ab0c6dd6ec9..a50e5f3f396 100644 --- a/arch/powerpc/platforms/pseries/lpar.c +++ b/arch/powerpc/platforms/pseries/lpar.c @@ -31,13 +31,14 @@ #include <asm/machdep.h> #include <asm/abs_addr.h> #include <asm/mmu_context.h> -#include <asm/ppcdebug.h> #include <asm/iommu.h> #include <asm/tlbflush.h> #include <asm/tlb.h> #include <asm/prom.h> #include <asm/abs_addr.h> #include <asm/cputable.h> +#include <asm/udbg.h> +#include <asm/smp.h> #include "plpar_wrappers.h" diff --git a/arch/powerpc/platforms/pseries/plpar_wrappers.h b/arch/powerpc/platforms/pseries/plpar_wrappers.h index 382f8c5b0e7..3bd1b3e0600 100644 --- a/arch/powerpc/platforms/pseries/plpar_wrappers.h +++ b/arch/powerpc/platforms/pseries/plpar_wrappers.h @@ -107,14 +107,4 @@ static inline long plpar_put_term_char(unsigned long termno, unsigned long len, lbuf[1]); } -static inline long plpar_set_xdabr(unsigned long address, unsigned long flags) -{ - return plpar_hcall_norets(H_SET_XDABR, address, flags); -} - -static inline long plpar_set_dabr(unsigned long val) -{ - return plpar_hcall_norets(H_SET_DABR, val); -} - #endif /* _PSERIES_PLPAR_WRAPPERS_H */ diff --git a/arch/powerpc/platforms/pseries/ras.c b/arch/powerpc/platforms/pseries/ras.c index 6562ff4b0a8..fbd214d68b0 100644 --- a/arch/powerpc/platforms/pseries/ras.c +++ b/arch/powerpc/platforms/pseries/ras.c @@ -48,7 +48,7 @@ #include <asm/ptrace.h> #include <asm/machdep.h> #include <asm/rtas.h> -#include <asm/ppcdebug.h> +#include <asm/udbg.h> static unsigned char ras_log_buf[RTAS_ERROR_LOG_MAX]; static DEFINE_SPINLOCK(ras_log_buf_lock); diff --git a/arch/powerpc/platforms/pseries/reconfig.c b/arch/powerpc/platforms/pseries/reconfig.c index 58c61219d08..d7d40033945 100644 --- a/arch/powerpc/platforms/pseries/reconfig.c +++ b/arch/powerpc/platforms/pseries/reconfig.c @@ -286,10 +286,8 @@ static struct property *new_property(const char *name, const int length, return new; cleanup: - if (new->name) - kfree(new->name); - if (new->value) - kfree(new->value); + kfree(new->name); + kfree(new->value); kfree(new); return NULL; } diff --git a/arch/powerpc/platforms/pseries/setup.c b/arch/powerpc/platforms/pseries/setup.c index 65bee939eec..e78c3936884 100644 --- a/arch/powerpc/platforms/pseries/setup.c +++ b/arch/powerpc/platforms/pseries/setup.c @@ -65,6 +65,7 @@ #include <asm/ppc-pci.h> #include <asm/i8259.h> #include <asm/udbg.h> +#include <asm/smp.h> #include "plpar_wrappers.h" @@ -353,14 +354,15 @@ static void pSeries_mach_cpu_die(void) static int pseries_set_dabr(unsigned long dabr) { - if (firmware_has_feature(FW_FEATURE_XDABR)) { - /* We want to catch accesses from kernel and userspace */ - return plpar_set_xdabr(dabr, H_DABRX_KERNEL | H_DABRX_USER); - } - - return plpar_set_dabr(dabr); + return plpar_hcall_norets(H_SET_DABR, dabr); } +static int pseries_set_xdabr(unsigned long dabr) +{ + /* We want to catch accesses from kernel and userspace */ + return plpar_hcall_norets(H_SET_XDABR, dabr, + H_DABRX_KERNEL | H_DABRX_USER); +} /* * Early initialization. Relocation is on but do not reference unbolted pages @@ -396,8 +398,10 @@ static void __init pSeries_init_early(void) DBG("Hello World !\n"); } - if (firmware_has_feature(FW_FEATURE_XDABR | FW_FEATURE_DABR)) + if (firmware_has_feature(FW_FEATURE_DABR)) ppc_md.set_dabr = pseries_set_dabr; + else if (firmware_has_feature(FW_FEATURE_XDABR)) + ppc_md.set_dabr = pseries_set_xdabr; iommu_init_early_pSeries(); diff --git a/arch/powerpc/sysdev/i8259.c b/arch/powerpc/sysdev/i8259.c index 90bce6e0c19..b7ac32fdd77 100644 --- a/arch/powerpc/sysdev/i8259.c +++ b/arch/powerpc/sysdev/i8259.c @@ -207,6 +207,9 @@ void __init i8259_init(unsigned long intack_addr, int offset) spin_unlock_irqrestore(&i8259_lock, flags); + for (i = 0; i < NUM_ISA_INTERRUPTS; ++i) + irq_desc[offset + i].handler = &i8259_pic; + /* reserve our resources */ setup_irq(offset + 2, &i8259_irqaction); request_resource(&ioport_resource, &pic1_iores); @@ -216,6 +219,4 @@ void __init i8259_init(unsigned long intack_addr, int offset) if (intack_addr != 0) pci_intack = ioremap(intack_addr, 1); - for (i = 0; i < NUM_ISA_INTERRUPTS; ++i) - irq_desc[offset + i].handler = &i8259_pic; } diff --git a/arch/powerpc/sysdev/u3_iommu.c b/arch/powerpc/sysdev/u3_iommu.c index 607722178c1..543d6590981 100644 --- a/arch/powerpc/sysdev/u3_iommu.c +++ b/arch/powerpc/sysdev/u3_iommu.c @@ -37,7 +37,6 @@ #include <linux/vmalloc.h> #include <asm/io.h> #include <asm/prom.h> -#include <asm/ppcdebug.h> #include <asm/iommu.h> #include <asm/pci-bridge.h> #include <asm/machdep.h> diff --git a/arch/ppc/4xx_io/serial_sicc.c b/arch/ppc/4xx_io/serial_sicc.c index e95c48d5757..84d96b857e4 100644 --- a/arch/ppc/4xx_io/serial_sicc.c +++ b/arch/ppc/4xx_io/serial_sicc.c @@ -1145,8 +1145,8 @@ static int set_serial_info(struct SICC_info *info, info->flags = ((state->flags & ~ASYNC_INTERNAL_FLAGS) | (info->flags & ASYNC_INTERNAL_FLAGS)); state->custom_divisor = new_serial.custom_divisor; - state->close_delay = new_serial.close_delay * HZ / 100; - state->closing_wait = new_serial.closing_wait * HZ / 100; + state->close_delay = msecs_to_jiffies(10 * new_serial.close_delay); + state->closing_wait = msecs_to_jiffies(10 * new_serial.closing_wait); info->tty->low_latency = (info->flags & ASYNC_LOW_LATENCY) ? 1 : 0; port->fifosize = new_serial.xmit_fifo_size; @@ -1465,10 +1465,8 @@ static void siccuart_close(struct tty_struct *tty, struct file *filp) info->event = 0; info->tty = NULL; if (info->blocked_open) { - if (info->state->close_delay) { - set_current_state(TASK_INTERRUPTIBLE); - schedule_timeout(info->state->close_delay); - } + if (info->state->close_delay) + schedule_timeout_interruptible(info->state->close_delay); wake_up_interruptible(&info->open_wait); } info->flags &= ~(ASYNC_NORMAL_ACTIVE|ASYNC_CLOSING); @@ -1496,7 +1494,7 @@ static void siccuart_wait_until_sent(struct tty_struct *tty, int timeout) * Note: we have to use pretty tight timings here to satisfy * the NIST-PCTS. */ - char_time = (info->timeout - HZ/50) / info->port->fifosize; + char_time = (info->timeout - msecs_to_jiffies(20)) / info->port->fifosize; char_time = char_time / 5; if (char_time == 0) char_time = 1; @@ -1521,8 +1519,7 @@ static void siccuart_wait_until_sent(struct tty_struct *tty, int timeout) tty->index, jiffies, expire, char_time); while ((readb(info->port->uart_base + BL_SICC_LSR) & _LSR_TX_ALL) != _LSR_TX_ALL) { - set_current_state(TASK_INTERRUPTIBLE); - schedule_timeout(char_time); + schedule_timeout_interruptible(char_time); if (signal_pending(current)) break; if (timeout && time_after(jiffies, expire)) @@ -1773,7 +1770,7 @@ int __init siccuart_init(void) for (i = 0; i < SERIAL_SICC_NR; i++) { struct SICC_state *state = sicc_state + i; state->line = i; - state->close_delay = 5 * HZ / 10; + state->close_delay = msecs_to_jiffies(500); state->closing_wait = 30 * HZ; spin_lock_init(&state->sicc_lock); } diff --git a/arch/ppc/8260_io/fcc_enet.c b/arch/ppc/8260_io/fcc_enet.c index 2086c6ad114..4edeede9ccf 100644 --- a/arch/ppc/8260_io/fcc_enet.c +++ b/arch/ppc/8260_io/fcc_enet.c @@ -1309,8 +1309,7 @@ static void mii_dm9161_wait(uint mii_reg, struct net_device *dev) /* Davicom takes a bit to come up after a reset, * so wait here for a bit */ - set_current_state(TASK_UNINTERRUPTIBLE); - schedule_timeout(timeout); + schedule_timeout_uninterruptible(timeout); } static phy_info_t phy_info_dm9161 = { diff --git a/arch/ppc/8xx_io/cs4218_tdm.c b/arch/ppc/8xx_io/cs4218_tdm.c index 532caa388dc..49eb2a7e65c 100644 --- a/arch/ppc/8xx_io/cs4218_tdm.c +++ b/arch/ppc/8xx_io/cs4218_tdm.c @@ -1013,8 +1013,7 @@ static void CS_IrqCleanup(void) */ cpm_free_handler(CPMVEC_SMC2); - if (beep_buf) - kfree(beep_buf); + kfree(beep_buf); kd_mksound = orig_mksound; } #endif /* MODULE */ diff --git a/arch/ppc/Kconfig b/arch/ppc/Kconfig index 114b90fdea2..8fa51b0a32d 100644 --- a/arch/ppc/Kconfig +++ b/arch/ppc/Kconfig @@ -746,6 +746,16 @@ config MPC834x bool default y if MPC834x_SYS +config CPM1 + bool + depends on 8xx + default y + help + The CPM1 (Communications Processor Module) is a coprocessor on + embedded CPUs made by Motorola. Selecting this option means that + you wish to build a kernel for a machine with a CPM1 coprocessor + on it (8xx, 827x, 8560). + config CPM2 bool depends on 8260 || MPC8560 || MPC8555 @@ -1247,6 +1257,14 @@ source "drivers/pci/Kconfig" source "drivers/pcmcia/Kconfig" +config RAPIDIO + bool "RapidIO support" if MPC8540 || MPC8560 + help + If you say Y here, the kernel will include drivers and + infrastructure code to support RapidIO interconnect devices. + +source "drivers/rapidio/Kconfig" + endmenu menu "Advanced setup" diff --git a/arch/ppc/boot/simple/Makefile b/arch/ppc/boot/simple/Makefile index b7bd8f61a4a..82df88b01bb 100644 --- a/arch/ppc/boot/simple/Makefile +++ b/arch/ppc/boot/simple/Makefile @@ -67,6 +67,12 @@ zimageinitrd-$(CONFIG_BAMBOO) := zImage.initrd-TREE entrypoint-$(CONFIG_BAMBOO) := 0x01000000 extra.o-$(CONFIG_BAMBOO) := pibs.o + zimage-$(CONFIG_BUBINGA) := zImage-TREE +zimageinitrd-$(CONFIG_BUBINGA) := zImage.initrd-TREE + end-$(CONFIG_BUBINGA) := bubinga + entrypoint-$(CONFIG_BUBINGA) := 0x01000000 + extra.o-$(CONFIG_BUBINGA) := openbios.o + zimage-$(CONFIG_EBONY) := zImage-TREE zimageinitrd-$(CONFIG_EBONY) := zImage.initrd-TREE end-$(CONFIG_EBONY) := ebony @@ -79,12 +85,30 @@ zimageinitrd-$(CONFIG_LUAN) := zImage.initrd-TREE entrypoint-$(CONFIG_LUAN) := 0x01000000 extra.o-$(CONFIG_LUAN) := pibs.o + zimage-$(CONFIG_YUCCA) := zImage-TREE +zimageinitrd-$(CONFIG_YUCCA) := zImage.initrd-TREE + end-$(CONFIG_YUCCA) := yucca + entrypoint-$(CONFIG_YUCCA) := 0x01000000 + extra.o-$(CONFIG_YUCCA) := pibs.o + zimage-$(CONFIG_OCOTEA) := zImage-TREE zimageinitrd-$(CONFIG_OCOTEA) := zImage.initrd-TREE end-$(CONFIG_OCOTEA) := ocotea entrypoint-$(CONFIG_OCOTEA) := 0x01000000 extra.o-$(CONFIG_OCOTEA) := pibs.o + zimage-$(CONFIG_SYCAMORE) := zImage-TREE +zimageinitrd-$(CONFIG_SYCAMORE) := zImage.initrd-TREE + end-$(CONFIG_SYCAMORE) := sycamore + entrypoint-$(CONFIG_SYCAMORE) := 0x01000000 + extra.o-$(CONFIG_SYCAMORE) := openbios.o + + zimage-$(CONFIG_WALNUT) := zImage-TREE +zimageinitrd-$(CONFIG_WALNUT) := zImage.initrd-TREE + end-$(CONFIG_WALNUT) := walnut + entrypoint-$(CONFIG_WALNUT) := 0x01000000 + extra.o-$(CONFIG_WALNUT) := openbios.o + extra.o-$(CONFIG_EV64260) := misc-ev64260.o end-$(CONFIG_EV64260) := ev64260 cacheflag-$(CONFIG_EV64260) := -include $(clear_L2_L3) @@ -162,7 +186,8 @@ OBJCOPY_ARGS := -O elf32-powerpc # head.o and relocate.o must be at the start. boot-y := head.o relocate.o $(extra.o-y) $(misc-y) -boot-$(CONFIG_40x) += embed_config.o +boot-$(CONFIG_REDWOOD_5) += embed_config.o +boot-$(CONFIG_REDWOOD_6) += embed_config.o boot-$(CONFIG_8xx) += embed_config.o boot-$(CONFIG_8260) += embed_config.o boot-$(CONFIG_BSEIP) += iic.o diff --git a/arch/ppc/boot/simple/misc.c b/arch/ppc/boot/simple/misc.c index e02de5b467a..f415d6c6236 100644 --- a/arch/ppc/boot/simple/misc.c +++ b/arch/ppc/boot/simple/misc.c @@ -23,7 +23,7 @@ #include <asm/page.h> #include <asm/mmu.h> #include <asm/bootinfo.h> -#ifdef CONFIG_44x +#ifdef CONFIG_4xx #include <asm/ibm4xx.h> #endif #include <asm/reg.h> @@ -88,6 +88,14 @@ get_mem_size(void) return 0; } +#if defined(CONFIG_40x) +#define PPC4xx_EMAC0_MR0 EMAC0_BASE +#endif + +#if defined(CONFIG_44x) && defined(PPC44x_EMAC0_MR0) +#define PPC4xx_EMAC0_MR0 PPC44x_EMAC0_MR0 +#endif + struct bi_record * decompress_kernel(unsigned long load_addr, int num_words, unsigned long cksum) { @@ -103,13 +111,13 @@ decompress_kernel(unsigned long load_addr, int num_words, unsigned long cksum) com_port = serial_init(0, NULL); #endif -#if defined(CONFIG_44x) && defined(PPC44x_EMAC0_MR0) +#if defined(PPC4xx_EMAC0_MR0) /* Reset MAL */ mtdcr(DCRN_MALCR(DCRN_MAL_BASE), MALCR_MMSR); /* Wait for reset */ while (mfdcr(DCRN_MALCR(DCRN_MAL_BASE)) & MALCR_MMSR) {}; /* Reset EMAC */ - *(volatile unsigned long *)PPC44x_EMAC0_MR0 = 0x20000000; + *(volatile unsigned long *)PPC4xx_EMAC0_MR0 = 0x20000000; __asm__ __volatile__("eieio"); #endif @@ -164,7 +172,9 @@ decompress_kernel(unsigned long load_addr, int num_words, unsigned long cksum) puts(" "); puthex((unsigned long)(&__ramdisk_end));puts("\n"); } +#ifndef CONFIG_40x /* don't overwrite the 40x image located at 0x00400000! */ avail_ram = (char *)0x00400000; +#endif end_avail = (char *)0x00800000; puts("avail ram: "); puthex((unsigned long)avail_ram); puts(" "); puthex((unsigned long)end_avail); puts("\n"); diff --git a/arch/ppc/boot/simple/openbios.c b/arch/ppc/boot/simple/openbios.c index c732b6d70cf..81f11d8b30a 100644 --- a/arch/ppc/boot/simple/openbios.c +++ b/arch/ppc/boot/simple/openbios.c @@ -1,19 +1,43 @@ /* * arch/ppc/boot/simple/openbios.c * - * 2005 (c) SYSGO AG - g.jaeger@sysgo.com + * Copyright (c) 2005 DENX Software Engineering + * Stefan Roese <sr@denx.de> + * + * Based on original work by + * 2005 (c) SYSGO AG - g.jaeger@sysgo.com + * * This file is licensed under the terms of the GNU General Public * License version 2. This program is licensed "as is" without * any warranty of any kind, whether express or implied. * - * Derived from arch/ppc/boot/simple/pibs.c (from MontaVista) */ #include <linux/types.h> #include <linux/config.h> #include <linux/string.h> #include <asm/ppcboot.h> -#include <platforms/4xx/ebony.h> +#include <asm/ibm4xx.h> +#include <asm/reg.h> +#ifdef CONFIG_40x +#include <asm/io.h> +#endif + +#if defined(CONFIG_BUBINGA) +#define BOARD_INFO_VECTOR 0xFFF80B50 /* openbios 1.19 moved this vector down - armin */ +#else +#define BOARD_INFO_VECTOR 0xFFFE0B50 +#endif + +#ifdef CONFIG_40x +/* Supply a default Ethernet address for those eval boards that don't + * ship with one. This is an address from the MBX board I have, so + * it is unlikely you will find it on your network. + */ +static ushort def_enet_addr[] = { 0x0800, 0x3e26, 0x1559 }; + +extern unsigned long timebase_period_ns; +#endif /* CONFIG_40x */ extern unsigned long decompress_kernel(unsigned long load_addr, int num_words, unsigned long cksum); @@ -23,15 +47,85 @@ extern unsigned long decompress_kernel(unsigned long load_addr, int num_words, bd_t hold_resid_buf __attribute__ ((__section__ (".data.boot"))); bd_t *hold_residual = &hold_resid_buf; +typedef struct openbios_board_info { + unsigned char bi_s_version[4]; /* Version of this structure */ + unsigned char bi_r_version[30]; /* Version of the IBM ROM */ + unsigned int bi_memsize; /* DRAM installed, in bytes */ +#ifdef CONFIG_405EP + unsigned char bi_enetaddr[2][6]; /* Local Ethernet MAC address */ +#else /* CONFIG_405EP */ + unsigned char bi_enetaddr[6]; /* Local Ethernet MAC address */ +#endif /* CONFIG_405EP */ + unsigned char bi_pci_enetaddr[6]; /* PCI Ethernet MAC address */ + unsigned int bi_intfreq; /* Processor speed, in Hz */ + unsigned int bi_busfreq; /* PLB Bus speed, in Hz */ + unsigned int bi_pci_busfreq; /* PCI Bus speed, in Hz */ +#ifdef CONFIG_405EP + unsigned int bi_opb_busfreq; /* OPB Bus speed, in Hz */ + unsigned int bi_pllouta_freq; /* PLL OUTA speed, in Hz */ +#endif /* CONFIG_405EP */ +} openbios_bd_t; + void * load_kernel(unsigned long load_addr, int num_words, unsigned long cksum, void *ign1, void *ign2) { - decompress_kernel(load_addr, num_words, cksum); +#ifdef CONFIG_40x + openbios_bd_t *openbios_bd = NULL; + openbios_bd_t *(*get_board_info)(void) = + (openbios_bd_t *(*)(void))(*(unsigned long *)BOARD_INFO_VECTOR); + + /* + * On 40x platforms we not only need the MAC-addresses, but also the + * clocks and memsize. Now try to get all values using the OpenBIOS + * "get_board_info()" callback. + */ + if ((openbios_bd = get_board_info()) != NULL) { + /* + * Copy bd_info from OpenBIOS struct into U-Boot struct + * used by kernel + */ + hold_residual->bi_memsize = openbios_bd->bi_memsize; + hold_residual->bi_intfreq = openbios_bd->bi_intfreq; + hold_residual->bi_busfreq = openbios_bd->bi_busfreq; + hold_residual->bi_pci_busfreq = openbios_bd->bi_pci_busfreq; + memcpy(hold_residual->bi_pci_enetaddr, openbios_bd->bi_pci_enetaddr, 6); +#ifdef CONFIG_405EP + memcpy(hold_residual->bi_enetaddr, openbios_bd->bi_enetaddr[0], 6); + memcpy(hold_residual->bi_enet1addr, openbios_bd->bi_enetaddr[1], 6); + hold_residual->bi_opbfreq = openbios_bd->bi_opb_busfreq; + hold_residual->bi_procfreq = openbios_bd->bi_pllouta_freq; +#else /* CONFIG_405EP */ + memcpy(hold_residual->bi_enetaddr, openbios_bd->bi_enetaddr, 6); +#endif /* CONFIG_405EP */ + } else { + /* Hmmm...better try to stuff some defaults. + */ + hold_residual->bi_memsize = 16 * 1024 * 1024; + hold_residual->bi_intfreq = 200000000; + hold_residual->bi_busfreq = 100000000; + hold_residual->bi_pci_busfreq = 66666666; + + /* + * Only supply one mac-address in this fallback + */ + memcpy(hold_residual->bi_enetaddr, (void *)def_enet_addr, 6); +#ifdef CONFIG_405EP + hold_residual->bi_opbfreq = 50000000; + hold_residual->bi_procfreq = 200000000; +#endif /* CONFIG_405EP */ + } + timebase_period_ns = 1000000000 / hold_residual->bi_intfreq; +#endif /* CONFIG_40x */ + +#ifdef CONFIG_440GP /* simply copy the MAC addresses */ - memcpy(hold_residual->bi_enetaddr, (char *)EBONY_OPENBIOS_MAC_BASE, 6); - memcpy(hold_residual->bi_enet1addr, (char *)(EBONY_OPENBIOS_MAC_BASE+EBONY_OPENBIOS_MAC_OFFSET), 6); + memcpy(hold_residual->bi_enetaddr, (char *)OPENBIOS_MAC_BASE, 6); + memcpy(hold_residual->bi_enet1addr, (char *)(OPENBIOS_MAC_BASE+OPENBIOS_MAC_OFFSET), 6); +#endif /* CONFIG_440GP */ + + decompress_kernel(load_addr, num_words, cksum); return (void *)hold_residual; } diff --git a/arch/ppc/configs/ev64360_defconfig b/arch/ppc/configs/ev64360_defconfig index de9bbb791db..d471e578dcb 100644 --- a/arch/ppc/configs/ev64360_defconfig +++ b/arch/ppc/configs/ev64360_defconfig @@ -1,17 +1,17 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.13-rc5 -# Fri Aug 5 15:18:23 2005 +# Linux kernel version: 2.6.14 +# Fri Oct 28 19:15:34 2005 # CONFIG_MMU=y CONFIG_GENERIC_HARDIRQS=y CONFIG_RWSEM_XCHGADD_ALGORITHM=y CONFIG_GENERIC_CALIBRATE_DELAY=y -CONFIG_HAVE_DEC_LOCK=y CONFIG_PPC=y CONFIG_PPC32=y CONFIG_GENERIC_NVRAM=y CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y +CONFIG_ARCH_MAY_HAVE_PC_FDC=y # # Code maturity level options @@ -26,6 +26,7 @@ CONFIG_INIT_ENV_ARG_LIMIT=32 # General setup # CONFIG_LOCALVERSION="" +CONFIG_LOCALVERSION_AUTO=y CONFIG_SWAP=y CONFIG_SYSVIPC=y CONFIG_POSIX_MQUEUE=y @@ -35,6 +36,7 @@ CONFIG_SYSCTL=y CONFIG_HOTPLUG=y CONFIG_KOBJECT_UEVENT=y # CONFIG_IKCONFIG is not set +CONFIG_INITRAMFS_SOURCE="" # CONFIG_EMBEDDED is not set CONFIG_KALLSYMS=y # CONFIG_KALLSYMS_EXTRA_PASS is not set @@ -74,7 +76,7 @@ CONFIG_TAU=y # CONFIG_TAU_AVERAGE is not set # CONFIG_KEXEC is not set # CONFIG_CPU_FREQ is not set -# CONFIG_PM is not set +# CONFIG_WANT_EARLY_SERIAL is not set CONFIG_PPC_STD_MMU=y CONFIG_NOT_COHERENT_CACHE=y @@ -86,22 +88,18 @@ CONFIG_NOT_COHERENT_CACHE=y # CONFIG_KATANA is not set # CONFIG_WILLOW is not set # CONFIG_CPCI690 is not set -# CONFIG_PCORE is not set # CONFIG_POWERPMC250 is not set # CONFIG_CHESTNUT is not set # CONFIG_SPRUCE is not set # CONFIG_HDPU is not set # CONFIG_EV64260 is not set # CONFIG_LOPEC is not set -# CONFIG_MCPN765 is not set # CONFIG_MVME5100 is not set # CONFIG_PPLUS is not set # CONFIG_PRPMC750 is not set # CONFIG_PRPMC800 is not set # CONFIG_SANDPOINT is not set # CONFIG_RADSTONE_PPC7D is not set -# CONFIG_ADIR is not set -# CONFIG_K2 is not set # CONFIG_PAL4 is not set # CONFIG_GEMINI is not set # CONFIG_EST8260 is not set @@ -138,10 +136,13 @@ CONFIG_FLATMEM_MANUAL=y # CONFIG_SPARSEMEM_MANUAL is not set CONFIG_FLATMEM=y CONFIG_FLAT_NODE_MEM_MAP=y +# CONFIG_SPARSEMEM_STATIC is not set CONFIG_BINFMT_ELF=y CONFIG_BINFMT_MISC=y CONFIG_CMDLINE_BOOL=y CONFIG_CMDLINE="console=ttyMM0,115200 root=/dev/mtdblock1 rw rootfstype=jffs2" +# CONFIG_PM is not set +# CONFIG_SOFTWARE_SUSPEND is not set CONFIG_SECCOMP=y CONFIG_ISA_DMA_API=y @@ -152,7 +153,6 @@ CONFIG_GENERIC_ISA_DMA=y CONFIG_PCI=y CONFIG_PCI_DOMAINS=y # CONFIG_PCI_LEGACY_PROC is not set -# CONFIG_PCI_NAMES is not set # # PCCARD (PCMCIA/CardBus) support @@ -206,14 +206,19 @@ CONFIG_SYN_COOKIES=y # CONFIG_INET_ESP is not set # CONFIG_INET_IPCOMP is not set # CONFIG_INET_TUNNEL is not set -CONFIG_IP_TCPDIAG=y -# CONFIG_IP_TCPDIAG_IPV6 is not set +CONFIG_INET_DIAG=y +CONFIG_INET_TCP_DIAG=y # CONFIG_TCP_CONG_ADVANCED is not set CONFIG_TCP_CONG_BIC=y # CONFIG_IPV6 is not set # CONFIG_NETFILTER is not set # +# DCCP Configuration (EXPERIMENTAL) +# +# CONFIG_IP_DCCP is not set + +# # SCTP Configuration (EXPERIMENTAL) # # CONFIG_IP_SCTP is not set @@ -239,6 +244,7 @@ CONFIG_TCP_CONG_BIC=y # CONFIG_HAMRADIO is not set # CONFIG_IRDA is not set # CONFIG_BT is not set +# CONFIG_IEEE80211 is not set # # Device Drivers @@ -252,6 +258,11 @@ CONFIG_PREVENT_FIRMWARE_BUILD=y # CONFIG_FW_LOADER is not set # +# Connector - unified userspace <-> kernelspace linker +# +# CONFIG_CONNECTOR is not set + +# # Memory Technology Devices (MTD) # CONFIG_MTD=y @@ -358,7 +369,6 @@ CONFIG_BLK_DEV_RAM=y CONFIG_BLK_DEV_RAM_COUNT=16 CONFIG_BLK_DEV_RAM_SIZE=32768 CONFIG_BLK_DEV_INITRD=y -CONFIG_INITRAMFS_SOURCE="" # CONFIG_LBD is not set # CONFIG_CDROM_PKTCDVD is not set @@ -379,6 +389,7 @@ CONFIG_IOSCHED_CFQ=y # # SCSI device support # +# CONFIG_RAID_ATTRS is not set # CONFIG_SCSI is not set # @@ -420,6 +431,10 @@ CONFIG_NETDEVICES=y # CONFIG_ARCNET is not set # +# PHY device support +# + +# # Ethernet (10 or 100Mbit) # # CONFIG_NET_ETHERNET is not set @@ -434,6 +449,7 @@ CONFIG_NETDEVICES=y # CONFIG_HAMACHI is not set # CONFIG_YELLOWFIN is not set # CONFIG_R8169 is not set +# CONFIG_SIS190 is not set # CONFIG_SKGE is not set # CONFIG_SK98LIN is not set # CONFIG_TIGON3 is not set @@ -446,6 +462,7 @@ CONFIG_MV643XX_ETH_0=y # # Ethernet (10000 Mbit) # +# CONFIG_CHELSIO_T1 is not set # CONFIG_IXGB is not set # CONFIG_S2IO is not set @@ -547,7 +564,20 @@ CONFIG_LEGACY_PTY_COUNT=256 # # Watchdog Cards # -# CONFIG_WATCHDOG is not set +CONFIG_WATCHDOG=y +# CONFIG_WATCHDOG_NOWAYOUT is not set + +# +# Watchdog Device Drivers +# +# CONFIG_SOFT_WATCHDOG is not set +CONFIG_MV64X60_WDT=y + +# +# PCI-based Watchdog Cards +# +# CONFIG_PCIPCWATCHDOG is not set +# CONFIG_WDTPCI is not set # CONFIG_NVRAM is not set CONFIG_GEN_RTC=y # CONFIG_GEN_RTC_X is not set @@ -571,7 +601,6 @@ CONFIG_GEN_RTC=y # I2C support # # CONFIG_I2C is not set -# CONFIG_I2C_SENSOR is not set # # Dallas's 1-wire bus @@ -582,6 +611,7 @@ CONFIG_GEN_RTC=y # Hardware Monitoring support # CONFIG_HWMON=y +# CONFIG_HWMON_VID is not set # CONFIG_HWMON_DEBUG_CHIP is not set # @@ -589,6 +619,10 @@ CONFIG_HWMON=y # # +# Multimedia Capabilities Port drivers +# + +# # Multimedia devices # # CONFIG_VIDEO_DEV is not set @@ -651,10 +685,6 @@ CONFIG_EXT2_FS=y # CONFIG_REISERFS_FS is not set # CONFIG_JFS_FS is not set # CONFIG_FS_POSIX_ACL is not set - -# -# XFS support -# # CONFIG_XFS_FS is not set # CONFIG_MINIX_FS is not set # CONFIG_ROMFS_FS is not set @@ -663,6 +693,7 @@ CONFIG_INOTIFY=y CONFIG_DNOTIFY=y # CONFIG_AUTOFS_FS is not set # CONFIG_AUTOFS4_FS is not set +# CONFIG_FUSE_FS is not set # # CD-ROM/DVD Filesystems @@ -683,11 +714,10 @@ CONFIG_DNOTIFY=y CONFIG_PROC_FS=y CONFIG_PROC_KCORE=y CONFIG_SYSFS=y -# CONFIG_DEVPTS_FS_XATTR is not set CONFIG_TMPFS=y -# CONFIG_TMPFS_XATTR is not set # CONFIG_HUGETLB_PAGE is not set CONFIG_RAMFS=y +# CONFIG_RELAYFS_FS is not set # # Miscellaneous filesystems @@ -735,6 +765,7 @@ CONFIG_SUNRPC=y # CONFIG_NCP_FS is not set # CONFIG_CODA_FS is not set # CONFIG_AFS_FS is not set +# CONFIG_9P_FS is not set # # Partition Types @@ -751,6 +782,7 @@ CONFIG_MSDOS_PARTITION=y # Library routines # # CONFIG_CRC_CCITT is not set +# CONFIG_CRC16 is not set CONFIG_CRC32=y # CONFIG_LIBCRC32C is not set CONFIG_ZLIB_INFLATE=y @@ -767,6 +799,7 @@ CONFIG_ZLIB_DEFLATE=y # CONFIG_PRINTK_TIME is not set # CONFIG_DEBUG_KERNEL is not set CONFIG_LOG_BUF_SHIFT=14 +# CONFIG_SERIAL_TEXT_DEBUG is not set # # Security options diff --git a/arch/ppc/configs/stx_gp3_defconfig b/arch/ppc/configs/stx_gp3_defconfig index 66dae836765..3fedc43e44a 100644 --- a/arch/ppc/configs/stx_gp3_defconfig +++ b/arch/ppc/configs/stx_gp3_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.11-rc2 -# Wed Jan 26 14:32:58 2005 +# Linux kernel version: 2.6.12-rc4 +# Tue May 24 18:11:04 2005 # CONFIG_MMU=y CONFIG_GENERIC_HARDIRQS=y @@ -11,6 +11,7 @@ CONFIG_HAVE_DEC_LOCK=y CONFIG_PPC=y CONFIG_PPC32=y CONFIG_GENERIC_NVRAM=y +CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y # # Code maturity level options @@ -18,6 +19,7 @@ CONFIG_GENERIC_NVRAM=y CONFIG_EXPERIMENTAL=y CONFIG_CLEAN_COMPILE=y CONFIG_BROKEN_ON_SMP=y +CONFIG_INIT_ENV_ARG_LIMIT=32 # # General setup @@ -29,7 +31,6 @@ CONFIG_SYSVIPC=y # CONFIG_BSD_PROCESS_ACCT is not set CONFIG_SYSCTL=y # CONFIG_AUDIT is not set -CONFIG_LOG_BUF_SHIFT=14 CONFIG_HOTPLUG=y CONFIG_KOBJECT_UEVENT=y # CONFIG_IKCONFIG is not set @@ -37,6 +38,9 @@ CONFIG_EMBEDDED=y CONFIG_KALLSYMS=y # CONFIG_KALLSYMS_ALL is not set # CONFIG_KALLSYMS_EXTRA_PASS is not set +CONFIG_PRINTK=y +CONFIG_BUG=y +CONFIG_BASE_FULL=y CONFIG_FUTEX=y CONFIG_EPOLL=y # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set @@ -46,6 +50,7 @@ CONFIG_CC_ALIGN_LABELS=0 CONFIG_CC_ALIGN_LOOPS=0 CONFIG_CC_ALIGN_JUMPS=0 # CONFIG_TINY_SHMEM is not set +CONFIG_BASE_SMALL=0 # # Loadable module support @@ -69,9 +74,11 @@ CONFIG_KMOD=y CONFIG_E500=y CONFIG_BOOKE=y CONFIG_FSL_BOOKE=y +# CONFIG_PHYS_64BIT is not set # CONFIG_SPE is not set CONFIG_MATH_EMULATION=y # CONFIG_CPU_FREQ is not set +# CONFIG_PM is not set CONFIG_85xx=y CONFIG_PPC_INDIRECT_PCI_BE=y @@ -96,6 +103,7 @@ CONFIG_HIGHMEM=y CONFIG_BINFMT_ELF=y CONFIG_BINFMT_MISC=m # CONFIG_CMDLINE_BOOL is not set +CONFIG_ISA_DMA_API=y # # Bus options @@ -104,15 +112,15 @@ CONFIG_PCI=y CONFIG_PCI_DOMAINS=y # CONFIG_PCI_LEGACY_PROC is not set # CONFIG_PCI_NAMES is not set +# CONFIG_PCI_DEBUG is not set # # PCCARD (PCMCIA/CardBus) support # # CONFIG_PCCARD is not set - -# -# PC-card bridges -# +CONFIG_RAPIDIO=y +CONFIG_RAPIDIO_8_BIT_TRANSPORT=y +CONFIG_RAPIDIO_DISC_TIMEOUT=30 # # Advanced setup @@ -152,7 +160,7 @@ CONFIG_PARPORT=m CONFIG_PARPORT_PC=m # CONFIG_PARPORT_PC_FIFO is not set # CONFIG_PARPORT_PC_SUPERIO is not set -# CONFIG_PARPORT_OTHER is not set +# CONFIG_PARPORT_GSC is not set # CONFIG_PARPORT_1284 is not set # @@ -264,7 +272,6 @@ CONFIG_SCSI_CONSTANTS=y # CONFIG_SCSI_BUSLOGIC is not set # CONFIG_SCSI_DMX3191D is not set # CONFIG_SCSI_EATA is not set -# CONFIG_SCSI_EATA_PIO is not set # CONFIG_SCSI_FUTURE_DOMAIN is not set # CONFIG_SCSI_GDTH is not set # CONFIG_SCSI_IPS is not set @@ -274,7 +281,6 @@ CONFIG_SCSI_CONSTANTS=y # CONFIG_SCSI_IMM is not set # CONFIG_SCSI_SYM53C8XX_2 is not set # CONFIG_SCSI_IPR is not set -# CONFIG_SCSI_QLOGIC_ISP is not set # CONFIG_SCSI_QLOGIC_FC is not set # CONFIG_SCSI_QLOGIC_1280 is not set CONFIG_SCSI_QLA2XXX=m @@ -283,6 +289,7 @@ CONFIG_SCSI_QLA2XXX=m # CONFIG_SCSI_QLA2300 is not set # CONFIG_SCSI_QLA2322 is not set # CONFIG_SCSI_QLA6312 is not set +# CONFIG_SCSI_LPFC is not set # CONFIG_SCSI_DC395x is not set # CONFIG_SCSI_DC390T is not set # CONFIG_SCSI_NSP32 is not set @@ -322,7 +329,6 @@ CONFIG_NET=y # CONFIG_PACKET=y # CONFIG_PACKET_MMAP is not set -# CONFIG_NETLINK_DEV is not set CONFIG_UNIX=y # CONFIG_NET_KEY is not set CONFIG_INET=y @@ -431,7 +437,7 @@ CONFIG_IP_NF_NAT_FTP=m # # Network testing # -# CONFIG_NET_PKTGEN is not set +CONFIG_NET_PKTGEN=y # CONFIG_NETPOLL is not set # CONFIG_NET_POLL_CONTROLLER is not set # CONFIG_HAMRADIO is not set @@ -499,6 +505,7 @@ CONFIG_GFAR_NAPI=y # Wan interfaces # # CONFIG_WAN is not set +CONFIG_RIONET=y # CONFIG_FDDI is not set # CONFIG_HIPPI is not set # CONFIG_PLIP is not set @@ -536,20 +543,6 @@ CONFIG_INPUT_EVDEV=m # CONFIG_INPUT_EVBUG is not set # -# Input I/O drivers -# -# CONFIG_GAMEPORT is not set -CONFIG_SOUND_GAMEPORT=y -CONFIG_SERIO=y -CONFIG_SERIO_I8042=y -CONFIG_SERIO_SERPORT=y -# CONFIG_SERIO_CT82C710 is not set -# CONFIG_SERIO_PARKBD is not set -# CONFIG_SERIO_PCIPS2 is not set -CONFIG_SERIO_LIBPS2=y -# CONFIG_SERIO_RAW is not set - -# # Input Device Drivers # CONFIG_INPUT_KEYBOARD=y @@ -567,6 +560,19 @@ CONFIG_MOUSE_PS2=y # CONFIG_INPUT_MISC is not set # +# Hardware I/O ports +# +CONFIG_SERIO=y +CONFIG_SERIO_I8042=y +CONFIG_SERIO_SERPORT=y +# CONFIG_SERIO_PARKBD is not set +# CONFIG_SERIO_PCIPS2 is not set +CONFIG_SERIO_LIBPS2=y +# CONFIG_SERIO_RAW is not set +# CONFIG_GAMEPORT is not set +CONFIG_SOUND_GAMEPORT=y + +# # Character devices # # CONFIG_VT is not set @@ -590,6 +596,7 @@ CONFIG_SERIAL_CPM_SCC2=y # CONFIG_SERIAL_CPM_SCC4 is not set # CONFIG_SERIAL_CPM_SMC1 is not set # CONFIG_SERIAL_CPM_SMC2 is not set +# CONFIG_SERIAL_JSM is not set CONFIG_UNIX98_PTYS=y CONFIG_LEGACY_PTYS=y CONFIG_LEGACY_PTY_COUNT=256 @@ -626,6 +633,11 @@ CONFIG_DRM=m # CONFIG_RAW_DRIVER is not set # +# TPM devices +# +# CONFIG_TCG_TPM is not set + +# # I2C support # CONFIG_I2C=m @@ -648,12 +660,12 @@ CONFIG_I2C_ALGOBIT=m # CONFIG_I2C_AMD8111 is not set # CONFIG_I2C_I801 is not set # CONFIG_I2C_I810 is not set +# CONFIG_I2C_PIIX4 is not set # CONFIG_I2C_ISA is not set # CONFIG_I2C_MPC is not set # CONFIG_I2C_NFORCE2 is not set # CONFIG_I2C_PARPORT is not set # CONFIG_I2C_PARPORT_LIGHT is not set -# CONFIG_I2C_PIIX4 is not set # CONFIG_I2C_PROSAVAGE is not set # CONFIG_I2C_SAVAGE4 is not set # CONFIG_SCx200_ACB is not set @@ -677,7 +689,9 @@ CONFIG_I2C_ALGOBIT=m # CONFIG_SENSORS_ASB100 is not set # CONFIG_SENSORS_DS1621 is not set # CONFIG_SENSORS_FSCHER is not set +# CONFIG_SENSORS_FSCPOS is not set # CONFIG_SENSORS_GL518SM is not set +# CONFIG_SENSORS_GL520SM is not set # CONFIG_SENSORS_IT87 is not set # CONFIG_SENSORS_LM63 is not set # CONFIG_SENSORS_LM75 is not set @@ -688,9 +702,11 @@ CONFIG_I2C_ALGOBIT=m # CONFIG_SENSORS_LM85 is not set # CONFIG_SENSORS_LM87 is not set # CONFIG_SENSORS_LM90 is not set +# CONFIG_SENSORS_LM92 is not set # CONFIG_SENSORS_MAX1619 is not set # CONFIG_SENSORS_PC87360 is not set # CONFIG_SENSORS_SMSC47B397 is not set +# CONFIG_SENSORS_SIS5595 is not set # CONFIG_SENSORS_SMSC47M1 is not set # CONFIG_SENSORS_VIA686A is not set # CONFIG_SENSORS_W83781D is not set @@ -700,10 +716,12 @@ CONFIG_I2C_ALGOBIT=m # # Other I2C Chip support # +# CONFIG_SENSORS_DS1337 is not set # CONFIG_SENSORS_EEPROM is not set # CONFIG_SENSORS_PCF8574 is not set # CONFIG_SENSORS_PCF8591 is not set # CONFIG_SENSORS_RTC8564 is not set +# CONFIG_SENSORS_M41T00 is not set # CONFIG_I2C_DEBUG_CORE is not set # CONFIG_I2C_DEBUG_ALGO is not set # CONFIG_I2C_DEBUG_BUS is not set @@ -732,7 +750,6 @@ CONFIG_I2C_ALGOBIT=m # Graphics support # # CONFIG_FB is not set -# CONFIG_BACKLIGHT_LCD_SUPPORT is not set # # Sound @@ -752,13 +769,9 @@ CONFIG_SOUND=m # # USB support # -# CONFIG_USB is not set CONFIG_USB_ARCH_HAS_HCD=y CONFIG_USB_ARCH_HAS_OHCI=y - -# -# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' may also be needed; see USB_STORAGE Help for more information -# +# CONFIG_USB is not set # # USB Gadget Support @@ -789,6 +802,10 @@ CONFIG_JBD_DEBUG=y CONFIG_FS_MBCACHE=y # CONFIG_REISERFS_FS is not set # CONFIG_JFS_FS is not set + +# +# XFS support +# # CONFIG_XFS_FS is not set # CONFIG_MINIX_FS is not set # CONFIG_ROMFS_FS is not set @@ -859,7 +876,6 @@ CONFIG_NFS_V3=y CONFIG_ROOT_NFS=y CONFIG_LOCKD=y CONFIG_LOCKD_V4=y -# CONFIG_EXPORTFS is not set CONFIG_SUNRPC=y # CONFIG_RPCSEC_GSS_KRB5 is not set # CONFIG_RPCSEC_GSS_SPKM3 is not set @@ -942,8 +958,10 @@ CONFIG_ZLIB_INFLATE=m # # Kernel hacking # +# CONFIG_PRINTK_TIME is not set CONFIG_DEBUG_KERNEL=y # CONFIG_MAGIC_SYSRQ is not set +CONFIG_LOG_BUF_SHIFT=14 # CONFIG_SCHEDSTATS is not set # CONFIG_DEBUG_SLAB is not set # CONFIG_DEBUG_SPINLOCK is not set diff --git a/arch/ppc/kernel/Makefile b/arch/ppc/kernel/Makefile index c610ca933a2..76a55a438f2 100644 --- a/arch/ppc/kernel/Makefile +++ b/arch/ppc/kernel/Makefile @@ -22,6 +22,7 @@ obj-$(CONFIG_POWER4) += cpu_setup_power4.o obj-$(CONFIG_MODULES) += module.o ppc_ksyms.o obj-$(CONFIG_NOT_COHERENT_CACHE) += dma-mapping.o obj-$(CONFIG_PCI) += pci.o +obj-$(CONFIG_RAPIDIO) += rio.o obj-$(CONFIG_KGDB) += ppc-stub.o obj-$(CONFIG_SMP) += smp.o smp-tbsync.o obj-$(CONFIG_TAU) += temp.o diff --git a/arch/ppc/kernel/head_44x.S b/arch/ppc/kernel/head_44x.S index 8b49679fad5..677c571aa27 100644 --- a/arch/ppc/kernel/head_44x.S +++ b/arch/ppc/kernel/head_44x.S @@ -190,8 +190,8 @@ skpinv: addi r4,r4,1 /* Increment */ /* xlat fields */ lis r4,UART0_PHYS_IO_BASE@h /* RPN depends on SoC */ -#ifndef CONFIG_440EP - ori r4,r4,0x0001 /* ERPN is 1 for second 4GB page */ +#ifdef UART0_PHYS_ERPN + ori r4,r4,UART0_PHYS_ERPN /* Add ERPN if above 4GB */ #endif /* attrib fields */ diff --git a/arch/ppc/kernel/misc.S b/arch/ppc/kernel/misc.S index 3056ede2424..ae6af29938a 100644 --- a/arch/ppc/kernel/misc.S +++ b/arch/ppc/kernel/misc.S @@ -25,6 +25,11 @@ #include <asm/thread_info.h> #include <asm/asm-offsets.h> +#ifdef CONFIG_8xx +#define ISYNC_8xx isync +#else +#define ISYNC_8xx +#endif .text .align 5 @@ -800,8 +805,18 @@ _GLOBAL(_insb) subi r4,r4,1 blelr- 00: lbz r5,0(r3) - eieio - stbu r5,1(r4) +01: eieio +02: stbu r5,1(r4) + ISYNC_8xx + .section .fixup,"ax" +03: blr + .text + .section __ex_table, "a" + .align 2 + .long 00b, 03b + .long 01b, 03b + .long 02b, 03b + .text bdnz 00b blr @@ -811,8 +826,18 @@ _GLOBAL(_outsb) subi r4,r4,1 blelr- 00: lbzu r5,1(r4) - stb r5,0(r3) - eieio +01: stb r5,0(r3) +02: eieio + ISYNC_8xx + .section .fixup,"ax" +03: blr + .text + .section __ex_table, "a" + .align 2 + .long 00b, 03b + .long 01b, 03b + .long 02b, 03b + .text bdnz 00b blr @@ -822,8 +847,18 @@ _GLOBAL(_insw) subi r4,r4,2 blelr- 00: lhbrx r5,0,r3 - eieio - sthu r5,2(r4) +01: eieio +02: sthu r5,2(r4) + ISYNC_8xx + .section .fixup,"ax" +03: blr + .text + .section __ex_table, "a" + .align 2 + .long 00b, 03b + .long 01b, 03b + .long 02b, 03b + .text bdnz 00b blr @@ -833,8 +868,18 @@ _GLOBAL(_outsw) subi r4,r4,2 blelr- 00: lhzu r5,2(r4) - eieio - sthbrx r5,0,r3 +01: eieio +02: sthbrx r5,0,r3 + ISYNC_8xx + .section .fixup,"ax" +03: blr + .text + .section __ex_table, "a" + .align 2 + .long 00b, 03b + .long 01b, 03b + .long 02b, 03b + .text bdnz 00b blr @@ -844,8 +889,18 @@ _GLOBAL(_insl) subi r4,r4,4 blelr- 00: lwbrx r5,0,r3 - eieio - stwu r5,4(r4) +01: eieio +02: stwu r5,4(r4) + ISYNC_8xx + .section .fixup,"ax" +03: blr + .text + .section __ex_table, "a" + .align 2 + .long 00b, 03b + .long 01b, 03b + .long 02b, 03b + .text bdnz 00b blr @@ -855,8 +910,18 @@ _GLOBAL(_outsl) subi r4,r4,4 blelr- 00: lwzu r5,4(r4) - stwbrx r5,0,r3 - eieio +01: stwbrx r5,0,r3 +02: eieio + ISYNC_8xx + .section .fixup,"ax" +03: blr + .text + .section __ex_table, "a" + .align 2 + .long 00b, 03b + .long 01b, 03b + .long 02b, 03b + .text bdnz 00b blr @@ -867,8 +932,18 @@ _GLOBAL(_insw_ns) subi r4,r4,2 blelr- 00: lhz r5,0(r3) - eieio - sthu r5,2(r4) +01: eieio +02: sthu r5,2(r4) + ISYNC_8xx + .section .fixup,"ax" +03: blr + .text + .section __ex_table, "a" + .align 2 + .long 00b, 03b + .long 01b, 03b + .long 02b, 03b + .text bdnz 00b blr @@ -879,8 +954,18 @@ _GLOBAL(_outsw_ns) subi r4,r4,2 blelr- 00: lhzu r5,2(r4) - sth r5,0(r3) - eieio +01: sth r5,0(r3) +02: eieio + ISYNC_8xx + .section .fixup,"ax" +03: blr + .text + .section __ex_table, "a" + .align 2 + .long 00b, 03b + .long 01b, 03b + .long 02b, 03b + .text bdnz 00b blr @@ -891,8 +976,18 @@ _GLOBAL(_insl_ns) subi r4,r4,4 blelr- 00: lwz r5,0(r3) - eieio - stwu r5,4(r4) +01: eieio +02: stwu r5,4(r4) + ISYNC_8xx + .section .fixup,"ax" +03: blr + .text + .section __ex_table, "a" + .align 2 + .long 00b, 03b + .long 01b, 03b + .long 02b, 03b + .text bdnz 00b blr @@ -903,8 +998,18 @@ _GLOBAL(_outsl_ns) subi r4,r4,4 blelr- 00: lwzu r5,4(r4) - stw r5,0(r3) - eieio +01: stw r5,0(r3) +02: eieio + ISYNC_8xx + .section .fixup,"ax" +03: blr + .text + .section __ex_table, "a" + .align 2 + .long 00b, 03b + .long 01b, 03b + .long 02b, 03b + .text bdnz 00b blr diff --git a/arch/ppc/kernel/rio.c b/arch/ppc/kernel/rio.c new file mode 100644 index 00000000000..29487fedfc7 --- /dev/null +++ b/arch/ppc/kernel/rio.c @@ -0,0 +1,52 @@ +/* + * RapidIO PPC32 support + * + * Copyright 2005 MontaVista Software, Inc. + * Matt Porter <mporter@kernel.crashing.org> + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + */ + +#include <linux/init.h> +#include <linux/kernel.h> +#include <linux/rio.h> + +#include <asm/rio.h> + +/** + * platform_rio_init - Do platform specific RIO init + * + * Any platform specific initialization of RapdIO + * hardware is done here as well as registration + * of any active master ports in the system. + */ +void __attribute__ ((weak)) + platform_rio_init(void) +{ + printk(KERN_WARNING "RIO: No platform_rio_init() present\n"); +} + +/** + * ppc_rio_init - Do PPC32 RIO init + * + * Calls platform-specific RIO init code and then calls + * rio_init_mports() to initialize any master ports that + * have been registered with the RIO subsystem. + */ +static int __init ppc_rio_init(void) +{ + printk(KERN_INFO "RIO: RapidIO init\n"); + + /* Platform specific initialization */ + platform_rio_init(); + + /* Enumerate all registered ports */ + rio_init_mports(); + + return 0; +} + +subsys_initcall(ppc_rio_init); diff --git a/arch/ppc/kernel/traps.c b/arch/ppc/kernel/traps.c index 16adde6b429..9dbc4d28fa2 100644 --- a/arch/ppc/kernel/traps.c +++ b/arch/ppc/kernel/traps.c @@ -49,7 +49,7 @@ extern int xmon_sstep(struct pt_regs *regs); extern int xmon_iabr_match(struct pt_regs *regs); extern int xmon_dabr_match(struct pt_regs *regs); -void (*debugger)(struct pt_regs *regs) = xmon; +int (*debugger)(struct pt_regs *regs) = xmon; int (*debugger_bpt)(struct pt_regs *regs) = xmon_bpt; int (*debugger_sstep)(struct pt_regs *regs) = xmon_sstep; int (*debugger_iabr_match)(struct pt_regs *regs) = xmon_iabr_match; @@ -57,7 +57,7 @@ int (*debugger_dabr_match)(struct pt_regs *regs) = xmon_dabr_match; void (*debugger_fault_handler)(struct pt_regs *regs); #else #ifdef CONFIG_KGDB -void (*debugger)(struct pt_regs *regs); +int (*debugger)(struct pt_regs *regs); int (*debugger_bpt)(struct pt_regs *regs); int (*debugger_sstep)(struct pt_regs *regs); int (*debugger_iabr_match)(struct pt_regs *regs); @@ -159,7 +159,7 @@ void _exception(int signr, struct pt_regs *regs, int code, unsigned long addr) */ static inline int check_io_access(struct pt_regs *regs) { -#ifdef CONFIG_PPC_PMAC +#if defined CONFIG_PPC_PMAC || defined CONFIG_8xx unsigned long msr = regs->msr; const struct exception_table_entry *entry; unsigned int *nip = (unsigned int *)regs->nip; @@ -178,7 +178,11 @@ static inline int check_io_access(struct pt_regs *regs) nip -= 2; else if (*nip == 0x4c00012c) /* isync */ --nip; - if (*nip == 0x7c0004ac || (*nip >> 26) == 3) { + /* eieio from I/O string functions */ + else if ((*nip) == 0x7c0006ac || *(nip+1) == 0x7c0006ac) + nip += 2; + if (*nip == 0x7c0004ac || (*nip >> 26) == 3 || + (*(nip+1) >> 26) == 3) { /* sync or twi */ unsigned int rb; diff --git a/arch/ppc/platforms/4xx/Kconfig b/arch/ppc/platforms/4xx/Kconfig index 76f4476cab4..d8837911bbc 100644 --- a/arch/ppc/platforms/4xx/Kconfig +++ b/arch/ppc/platforms/4xx/Kconfig @@ -82,6 +82,12 @@ config LUAN help This option enables support for the IBM PPC440SP evaluation board. +config YUCCA + bool "Yucca" + select WANT_EARLY_SERIAL + help + This option enables support for the AMCC PPC440SPe evaluation board. + config OCOTEA bool "Ocotea" select WANT_EARLY_SERIAL @@ -124,9 +130,14 @@ config 440SP depends on LUAN default y +config 440SPE + bool + depends on YUCCA + default y + config 440 bool - depends on 440GP || 440SP || 440EP + depends on 440GP || 440SP || 440SPE || 440EP default y config 440A @@ -158,7 +169,7 @@ config BOOKE config IBM_OCP bool - depends on ASH || BAMBOO || BUBINGA || CPCI405 || EBONY || EP405 || LUAN || OCOTEA || REDWOOD_5 || REDWOOD_6 || SYCAMORE || WALNUT + depends on ASH || BAMBOO || BUBINGA || CPCI405 || EBONY || EP405 || LUAN || YUCCA || OCOTEA || REDWOOD_5 || REDWOOD_6 || SYCAMORE || WALNUT default y config XILINX_OCP @@ -168,7 +179,7 @@ config XILINX_OCP config IBM_EMAC4 bool - depends on 440GX || 440SP + depends on 440GX || 440SP || 440SPE default y config BIOS_FIXUP @@ -214,7 +225,7 @@ config EMBEDDEDBOOT config IBM_OPENBIOS bool - depends on ASH || BUBINGA || REDWOOD_5 || REDWOOD_6 || SYCAMORE || WALNUT + depends on ASH || REDWOOD_5 || REDWOOD_6 default y config PPC4xx_DMA diff --git a/arch/ppc/platforms/4xx/Makefile b/arch/ppc/platforms/4xx/Makefile index 1dd6d7fd6a9..c9bb6117095 100644 --- a/arch/ppc/platforms/4xx/Makefile +++ b/arch/ppc/platforms/4xx/Makefile @@ -7,6 +7,7 @@ obj-$(CONFIG_EBONY) += ebony.o obj-$(CONFIG_EP405) += ep405.o obj-$(CONFIG_BUBINGA) += bubinga.o obj-$(CONFIG_LUAN) += luan.o +obj-$(CONFIG_YUCCA) += yucca.o obj-$(CONFIG_OCOTEA) += ocotea.o obj-$(CONFIG_REDWOOD_5) += redwood5.o obj-$(CONFIG_REDWOOD_6) += redwood6.o @@ -22,6 +23,7 @@ obj-$(CONFIG_440EP) += ibm440ep.o obj-$(CONFIG_440GP) += ibm440gp.o obj-$(CONFIG_440GX) += ibm440gx.o obj-$(CONFIG_440SP) += ibm440sp.o +obj-$(CONFIG_440SPE) += ppc440spe.o obj-$(CONFIG_405EP) += ibm405ep.o obj-$(CONFIG_405GPR) += ibm405gpr.o obj-$(CONFIG_VIRTEX_II_PRO) += virtex-ii_pro.o diff --git a/arch/ppc/platforms/4xx/bubinga.c b/arch/ppc/platforms/4xx/bubinga.c index 3678abf8631..8110f55668c 100644 --- a/arch/ppc/platforms/4xx/bubinga.c +++ b/arch/ppc/platforms/4xx/bubinga.c @@ -89,7 +89,7 @@ bubinga_early_serial_map(void) * by 16. */ uart_div = (mfdcr(DCRN_CPC0_UCR_BASE) & DCRN_CPC0_UCR_U0DIV); - uart_clock = __res.bi_pllouta_freq / uart_div; + uart_clock = __res.bi_procfreq / uart_div; /* Setup serial port access */ memset(&port, 0, sizeof(port)); diff --git a/arch/ppc/platforms/4xx/bubinga.h b/arch/ppc/platforms/4xx/bubinga.h index b1df856f8e2..b5380cfaf5c 100644 --- a/arch/ppc/platforms/4xx/bubinga.h +++ b/arch/ppc/platforms/4xx/bubinga.h @@ -1,52 +1,34 @@ /* - * Support for IBM PPC 405EP evaluation board (Bubinga). + * arch/ppc/platforms/4xx/bubinga.h * - * Author: SAW (IBM), derived from walnut.h. - * Maintained by MontaVista Software <source@mvista.com> + * Bubinga board definitions + * + * Copyright (c) 2005 DENX Software Engineering + * Stefan Roese <sr@denx.de> + * + * Based on original work by + * SAW (IBM) + * 2003 (c) MontaVista Softare Inc. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. * - * 2003 (c) MontaVista Softare Inc. This file is licensed under the - * terms of the GNU General Public License version 2. This program is - * licensed "as is" without any warranty of any kind, whether express - * or implied. */ #ifdef __KERNEL__ #ifndef __BUBINGA_H__ #define __BUBINGA_H__ -/* 405EP */ +#include <linux/config.h> #include <platforms/4xx/ibm405ep.h> - -#ifndef __ASSEMBLY__ -/* - * Data structure defining board information maintained by the boot - * ROM on IBM's evaluation board. An effort has been made to - * keep the field names consistent with the 8xx 'bd_t' board info - * structures. - */ - -typedef struct board_info { - unsigned char bi_s_version[4]; /* Version of this structure */ - unsigned char bi_r_version[30]; /* Version of the IBM ROM */ - unsigned int bi_memsize; /* DRAM installed, in bytes */ - unsigned char bi_enetaddr[2][6]; /* Local Ethernet MAC address */ unsigned char bi_pci_enetaddr[6]; /* PCI Ethernet MAC address */ - unsigned int bi_intfreq; /* Processor speed, in Hz */ - unsigned int bi_busfreq; /* PLB Bus speed, in Hz */ - unsigned int bi_pci_busfreq; /* PCI Bus speed, in Hz */ - unsigned int bi_opb_busfreq; /* OPB Bus speed, in Hz */ - unsigned int bi_pllouta_freq; /* PLL OUTA speed, in Hz */ -} bd_t; - -/* Some 4xx parts use a different timebase frequency from the internal clock. -*/ -#define bi_tbfreq bi_intfreq - +#include <asm/ppcboot.h> /* Memory map for the Bubinga board. * Generic 4xx plus RTC. */ -extern void *bubinga_rtc_base; #define BUBINGA_RTC_PADDR ((uint)0xf0000000) #define BUBINGA_RTC_VADDR BUBINGA_RTC_PADDR #define BUBINGA_RTC_SIZE ((uint)8*1024) @@ -58,12 +40,18 @@ extern void *bubinga_rtc_base; * for typical configurations at various CPU speeds. * The base baud is calculated as (FWDA / EXT UART DIV / 16) */ -#define BASE_BAUD 0 +#define BASE_BAUD 0 -#define BUBINGA_FPGA_BASE 0xF0300000 +/* Flash */ +#define PPC40x_FPGA_BASE 0xF0300000 +#define PPC40x_FPGA_REG_OFFS 1 /* offset to flash map reg */ +#define PPC40x_FLASH_ONBD_N(x) (x & 0x02) +#define PPC40x_FLASH_SRAM_SEL(x) (x & 0x01) +#define PPC40x_FLASH_LOW 0xFFF00000 +#define PPC40x_FLASH_HIGH 0xFFF80000 +#define PPC40x_FLASH_SIZE 0x80000 -#define PPC4xx_MACHINE_NAME "IBM Bubinga" +#define PPC4xx_MACHINE_NAME "IBM Bubinga" -#endif /* !__ASSEMBLY__ */ #endif /* __BUBINGA_H__ */ #endif /* __KERNEL__ */ diff --git a/arch/ppc/platforms/4xx/ebony.h b/arch/ppc/platforms/4xx/ebony.h index d08faa46a0a..b91ad4272df 100644 --- a/arch/ppc/platforms/4xx/ebony.h +++ b/arch/ppc/platforms/4xx/ebony.h @@ -24,8 +24,8 @@ #define PPC44x_EMAC0_MR0 0xE0000800 /* Where to find the MAC info */ -#define EBONY_OPENBIOS_MAC_BASE 0xfffffe0c -#define EBONY_OPENBIOS_MAC_OFFSET 0x0c +#define OPENBIOS_MAC_BASE 0xfffffe0c +#define OPENBIOS_MAC_OFFSET 0x0c /* Default clock rates for Rev. B and Rev. C silicon */ #define EBONY_440GP_RB_SYSCLK 33000000 diff --git a/arch/ppc/platforms/4xx/ppc440spe.c b/arch/ppc/platforms/4xx/ppc440spe.c new file mode 100644 index 00000000000..6139a0b3393 --- /dev/null +++ b/arch/ppc/platforms/4xx/ppc440spe.c @@ -0,0 +1,148 @@ +/* + * arch/ppc/platforms/4xx/ppc440spe.c + * + * PPC440SPe I/O descriptions + * + * Roland Dreier <rolandd@cisco.com> + * Copyright (c) 2005 Cisco Systems. All rights reserved. + * + * Matt Porter <mporter@kernel.crashing.org> + * Copyright 2002-2005 MontaVista Software Inc. + * + * Eugene Surovegin <eugene.surovegin@zultys.com> or <ebs@ebshome.net> + * Copyright (c) 2003, 2004 Zultys Technologies + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + * + */ +#include <linux/init.h> +#include <linux/module.h> +#include <platforms/4xx/ppc440spe.h> +#include <asm/ocp.h> +#include <asm/ppc4xx_pic.h> + +static struct ocp_func_emac_data ppc440spe_emac0_def = { + .rgmii_idx = -1, /* No RGMII */ + .rgmii_mux = -1, /* No RGMII */ + .zmii_idx = -1, /* No ZMII */ + .zmii_mux = -1, /* No ZMII */ + .mal_idx = 0, /* MAL device index */ + .mal_rx_chan = 0, /* MAL rx channel number */ + .mal_tx_chan = 0, /* MAL tx channel number */ + .wol_irq = 61, /* WOL interrupt number */ + .mdio_idx = -1, /* No shared MDIO */ + .tah_idx = -1, /* No TAH */ +}; +OCP_SYSFS_EMAC_DATA() + +static struct ocp_func_mal_data ppc440spe_mal0_def = { + .num_tx_chans = 1, /* Number of TX channels */ + .num_rx_chans = 1, /* Number of RX channels */ + .txeob_irq = 38, /* TX End Of Buffer IRQ */ + .rxeob_irq = 39, /* RX End Of Buffer IRQ */ + .txde_irq = 34, /* TX Descriptor Error IRQ */ + .rxde_irq = 35, /* RX Descriptor Error IRQ */ + .serr_irq = 33, /* MAL System Error IRQ */ + .dcr_base = DCRN_MAL_BASE /* MAL0_CFG DCR number */ +}; +OCP_SYSFS_MAL_DATA() + +static struct ocp_func_iic_data ppc440spe_iic0_def = { + .fast_mode = 0, /* Use standad mode (100Khz) */ +}; + +static struct ocp_func_iic_data ppc440spe_iic1_def = { + .fast_mode = 0, /* Use standad mode (100Khz) */ +}; +OCP_SYSFS_IIC_DATA() + +struct ocp_def core_ocp[] = { + { .vendor = OCP_VENDOR_IBM, + .function = OCP_FUNC_16550, + .index = 0, + .paddr = PPC440SPE_UART0_ADDR, + .irq = UART0_INT, + .pm = IBM_CPM_UART0, + }, + { .vendor = OCP_VENDOR_IBM, + .function = OCP_FUNC_16550, + .index = 1, + .paddr = PPC440SPE_UART1_ADDR, + .irq = UART1_INT, + .pm = IBM_CPM_UART1, + }, + { .vendor = OCP_VENDOR_IBM, + .function = OCP_FUNC_16550, + .index = 2, + .paddr = PPC440SPE_UART2_ADDR, + .irq = UART2_INT, + .pm = IBM_CPM_UART2, + }, + { .vendor = OCP_VENDOR_IBM, + .function = OCP_FUNC_IIC, + .index = 0, + .paddr = 0x00000004f0000400ULL, + .irq = 2, + .pm = IBM_CPM_IIC0, + .additions = &ppc440spe_iic0_def, + .show = &ocp_show_iic_data + }, + { .vendor = OCP_VENDOR_IBM, + .function = OCP_FUNC_IIC, + .index = 1, + .paddr = 0x00000004f0000500ULL, + .irq = 3, + .pm = IBM_CPM_IIC1, + .additions = &ppc440spe_iic1_def, + .show = &ocp_show_iic_data + }, + { .vendor = OCP_VENDOR_IBM, + .function = OCP_FUNC_GPIO, + .index = 0, + .paddr = 0x00000004f0000700ULL, + .irq = OCP_IRQ_NA, + .pm = IBM_CPM_GPIO0, + }, + { .vendor = OCP_VENDOR_IBM, + .function = OCP_FUNC_MAL, + .paddr = OCP_PADDR_NA, + .irq = OCP_IRQ_NA, + .pm = OCP_CPM_NA, + .additions = &ppc440spe_mal0_def, + .show = &ocp_show_mal_data, + }, + { .vendor = OCP_VENDOR_IBM, + .function = OCP_FUNC_EMAC, + .index = 0, + .paddr = 0x00000004f0000800ULL, + .irq = 60, + .pm = OCP_CPM_NA, + .additions = &ppc440spe_emac0_def, + .show = &ocp_show_emac_data, + }, + { .vendor = OCP_VENDOR_INVALID + } +}; + +/* Polarity and triggering settings for internal interrupt sources */ +struct ppc4xx_uic_settings ppc4xx_core_uic_cfg[] __initdata = { + { .polarity = 0xffffffff, + .triggering = 0x010f0004, + .ext_irq_mask = 0x00000000, + }, + { .polarity = 0xffffffff, + .triggering = 0x001f8040, + .ext_irq_mask = 0x00007c30, /* IRQ6 - IRQ7, IRQ8 - IRQ12 */ + }, + { .polarity = 0xffffffff, + .triggering = 0x00000000, + .ext_irq_mask = 0x000000fc, /* IRQ0 - IRQ5 */ + }, + { .polarity = 0xffffffff, + .triggering = 0x00000000, + .ext_irq_mask = 0x00000000, + }, +}; diff --git a/arch/ppc/platforms/4xx/ppc440spe.h b/arch/ppc/platforms/4xx/ppc440spe.h new file mode 100644 index 00000000000..2216846973b --- /dev/null +++ b/arch/ppc/platforms/4xx/ppc440spe.h @@ -0,0 +1,66 @@ +/* + * arch/ppc/platforms/4xx/ibm440spe.h + * + * PPC440SPe definitions + * + * Roland Dreier <rolandd@cisco.com> + * Copyright (c) 2005 Cisco Systems. All rights reserved. + * + * Matt Porter <mporter@kernel.crashing.org> + * Copyright 2004-2005 MontaVista Software, Inc. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + */ + +#ifdef __KERNEL__ +#ifndef __PPC_PLATFORMS_PPC440SPE_H +#define __PPC_PLATFORMS_PPC440SPE_H + +#include <linux/config.h> + +#include <asm/ibm44x.h> + +/* UART */ +#define PPC440SPE_UART0_ADDR 0x00000004f0000200ULL +#define PPC440SPE_UART1_ADDR 0x00000004f0000300ULL +#define PPC440SPE_UART2_ADDR 0x00000004f0000600ULL +#define UART0_INT 0 +#define UART1_INT 1 +#define UART2_INT 37 + +/* Clock and Power Management */ +#define IBM_CPM_IIC0 0x80000000 /* IIC interface */ +#define IBM_CPM_IIC1 0x40000000 /* IIC interface */ +#define IBM_CPM_PCI 0x20000000 /* PCI bridge */ +#define IBM_CPM_CPU 0x02000000 /* processor core */ +#define IBM_CPM_DMA 0x01000000 /* DMA controller */ +#define IBM_CPM_BGO 0x00800000 /* PLB to OPB bus arbiter */ +#define IBM_CPM_BGI 0x00400000 /* OPB to PLB bridge */ +#define IBM_CPM_EBC 0x00200000 /* External Bux Controller */ +#define IBM_CPM_EBM 0x00100000 /* Ext Bus Master Interface */ +#define IBM_CPM_DMC 0x00080000 /* SDRAM peripheral controller */ +#define IBM_CPM_PLB 0x00040000 /* PLB bus arbiter */ +#define IBM_CPM_SRAM 0x00020000 /* SRAM memory controller */ +#define IBM_CPM_PPM 0x00002000 /* PLB Performance Monitor */ +#define IBM_CPM_UIC1 0x00001000 /* Universal Interrupt Controller */ +#define IBM_CPM_GPIO0 0x00000800 /* General Purpose IO (??) */ +#define IBM_CPM_GPT 0x00000400 /* General Purpose Timers */ +#define IBM_CPM_UART0 0x00000200 /* serial port 0 */ +#define IBM_CPM_UART1 0x00000100 /* serial port 1 */ +#define IBM_CPM_UART2 0x00000100 /* serial port 1 */ +#define IBM_CPM_UIC0 0x00000080 /* Universal Interrupt Controller */ +#define IBM_CPM_TMRCLK 0x00000040 /* CPU timers */ +#define IBM_CPM_EMAC0 0x00000020 /* EMAC 0 */ + +#define DFLT_IBM4xx_PM ~(IBM_CPM_UIC | IBM_CPM_UIC1 | IBM_CPM_CPU \ + | IBM_CPM_EBC | IBM_CPM_SRAM | IBM_CPM_BGO \ + | IBM_CPM_EBM | IBM_CPM_PLB | IBM_CPM_OPB \ + | IBM_CPM_TMRCLK | IBM_CPM_DMA | IBM_CPM_PCI \ + | IBM_CPM_TAHOE0 | IBM_CPM_TAHOE1 \ + | IBM_CPM_EMAC0 | IBM_CPM_EMAC1 \ + | IBM_CPM_EMAC2 | IBM_CPM_EMAC3 ) +#endif /* __PPC_PLATFORMS_PPC440SP_H */ +#endif /* __KERNEL__ */ diff --git a/arch/ppc/platforms/4xx/sycamore.c b/arch/ppc/platforms/4xx/sycamore.c index d8019eec470..281b4a2ffb9 100644 --- a/arch/ppc/platforms/4xx/sycamore.c +++ b/arch/ppc/platforms/4xx/sycamore.c @@ -88,9 +88,6 @@ ppc405_map_irq(struct pci_dev *dev, unsigned char idsel, unsigned char pin) void __init sycamore_setup_arch(void) { -#define SYCAMORE_PS2_BASE 0xF0100000 -#define SYCAMORE_FPGA_BASE 0xF0300000 - void *fpga_brdc; unsigned char fpga_brdc_data; void *fpga_enable; @@ -100,7 +97,7 @@ sycamore_setup_arch(void) ppc4xx_setup_arch(); - ibm_ocp_set_emac(0, 1); + ibm_ocp_set_emac(0, 0); kb_data = ioremap(SYCAMORE_PS2_BASE, 8); if (!kb_data) { @@ -111,7 +108,7 @@ sycamore_setup_arch(void) kb_cs = kb_data + 1; - fpga_status = ioremap(SYCAMORE_FPGA_BASE, 8); + fpga_status = ioremap(PPC40x_FPGA_BASE, 8); if (!fpga_status) { printk(KERN_CRIT "sycamore_setup_arch() fpga_status ioremap failed\n"); diff --git a/arch/ppc/platforms/4xx/sycamore.h b/arch/ppc/platforms/4xx/sycamore.h index 3e7b4e2c8c5..1cd6c824fd6 100644 --- a/arch/ppc/platforms/4xx/sycamore.h +++ b/arch/ppc/platforms/4xx/sycamore.h @@ -1,67 +1,52 @@ /* * arch/ppc/platforms/4xx/sycamore.h * - * Macros, definitions, and data structures specific to the IBM PowerPC - * 405GPr "Sycamore" evaluation board. + * Sycamore board definitions * - * Author: Armin Kuster <akuster@mvista.com> + * Copyright (c) 2005 DENX Software Engineering + * Stefan Roese <sr@denx.de> + * + * Based on original work by + * Armin Kuster <akuster@mvista.com> + * 2000 (c) MontaVista, Software, Inc. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. * - * 2000 (c) MontaVista, Software, Inc. This file is licensed under - * the terms of the GNU General Public License version 2. This program - * is licensed "as is" without any warranty of any kind, whether express - * or implied. */ #ifdef __KERNEL__ #ifndef __ASM_SYCAMORE_H__ #define __ASM_SYCAMORE_H__ +#include <linux/config.h> #include <platforms/4xx/ibm405gpr.h> +#include <asm/ppcboot.h> -#ifndef __ASSEMBLY__ -/* - * Data structure defining board information maintained by the boot - * ROM on IBM's "Sycamore" evaluation board. An effort has been made to - * keep the field names consistent with the 8xx 'bd_t' board info - * structures. - */ - -typedef struct board_info { - unsigned char bi_s_version[4]; /* Version of this structure */ - unsigned char bi_r_version[30]; /* Version of the IBM ROM */ - unsigned int bi_memsize; /* DRAM installed, in bytes */ - unsigned char bi_enetaddr[6]; /* Local Ethernet MAC address */ - unsigned char bi_pci_enetaddr[6]; /* PCI Ethernet MAC address */ - unsigned int bi_intfreq; /* Processor speed, in Hz */ - unsigned int bi_busfreq; /* PLB Bus speed, in Hz */ - unsigned int bi_pci_busfreq; /* PCI Bus speed, in Hz */ -} bd_t; - -/* Some 4xx parts use a different timebase frequency from the internal clock. -*/ -#define bi_tbfreq bi_intfreq - - -/* Memory map for the IBM "Sycamore" 405GP evaluation board. +/* Memory map for the IBM "Sycamore" 405GPr evaluation board. * Generic 4xx plus RTC. */ -extern void *sycamore_rtc_base; #define SYCAMORE_RTC_PADDR ((uint)0xf0000000) #define SYCAMORE_RTC_VADDR SYCAMORE_RTC_PADDR -#define SYCAMORE_RTC_SIZE ((uint)8*1024) +#define SYCAMORE_RTC_SIZE ((uint)8*1024) -#ifdef CONFIG_PPC405GP_INTERNAL_CLOCK -#define BASE_BAUD 201600 -#else #define BASE_BAUD 691200 -#endif -#define SYCAMORE_PS2_BASE 0xF0100000 -#define SYCAMORE_FPGA_BASE 0xF0300000 +#define SYCAMORE_PS2_BASE 0xF0100000 + +/* Flash */ +#define PPC40x_FPGA_BASE 0xF0300000 +#define PPC40x_FPGA_REG_OFFS 5 /* offset to flash map reg */ +#define PPC40x_FLASH_ONBD_N(x) (x & 0x02) +#define PPC40x_FLASH_SRAM_SEL(x) (x & 0x01) +#define PPC40x_FLASH_LOW 0xFFF00000 +#define PPC40x_FLASH_HIGH 0xFFF80000 +#define PPC40x_FLASH_SIZE 0x80000 #define PPC4xx_MACHINE_NAME "IBM Sycamore" -#endif /* !__ASSEMBLY__ */ #endif /* __ASM_SYCAMORE_H__ */ #endif /* __KERNEL__ */ diff --git a/arch/ppc/platforms/4xx/walnut.c b/arch/ppc/platforms/4xx/walnut.c index a33eda4b748..74cb33182d9 100644 --- a/arch/ppc/platforms/4xx/walnut.c +++ b/arch/ppc/platforms/4xx/walnut.c @@ -90,7 +90,7 @@ walnut_setup_arch(void) kb_cs = kb_data + 1; - fpga_status = ioremap(WALNUT_FPGA_BASE, 8); + fpga_status = ioremap(PPC40x_FPGA_BASE, 8); if (!fpga_status) { printk(KERN_CRIT "walnut_setup_arch() fpga_status ioremap failed\n"); diff --git a/arch/ppc/platforms/4xx/walnut.h b/arch/ppc/platforms/4xx/walnut.h index 04cfbf3696b..dcf2691698c 100644 --- a/arch/ppc/platforms/4xx/walnut.h +++ b/arch/ppc/platforms/4xx/walnut.h @@ -1,72 +1,55 @@ /* * arch/ppc/platforms/4xx/walnut.h * - * Macros, definitions, and data structures specific to the IBM PowerPC - * 405GP "Walnut" evaluation board. + * Walnut board definitions * - * Authors: Grant Erickson <grant@lcse.umn.edu>, Frank Rowand - * <frank_rowand@mvista.com>, Debbie Chu <debbie_chu@mvista.com> or - * source@mvista.com + * Copyright (c) 2005 DENX Software Engineering + * Stefan Roese <sr@denx.de> * - * Copyright (c) 1999 Grant Erickson <grant@lcse.umn.edu> + * Based on original work by + * Copyright (c) 1999 Grant Erickson <grant@lcse.umn.edu> + * Frank Rowand <frank_rowand@mvista.com> + * Debbie Chu <debbie_chu@mvista.com> + * 2000 (c) MontaVista, Software, Inc. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. * - * 2000 (c) MontaVista, Software, Inc. This file is licensed under - * the terms of the GNU General Public License version 2. This program - * is licensed "as is" without any warranty of any kind, whether express - * or implied. */ #ifdef __KERNEL__ #ifndef __ASM_WALNUT_H__ #define __ASM_WALNUT_H__ -/* We have a 405GP core */ +#include <linux/config.h> #include <platforms/4xx/ibm405gp.h> - -#ifndef __ASSEMBLY__ -/* - * Data structure defining board information maintained by the boot - * ROM on IBM's "Walnut" evaluation board. An effort has been made to - * keep the field names consistent with the 8xx 'bd_t' board info - * structures. - */ - -typedef struct board_info { - unsigned char bi_s_version[4]; /* Version of this structure */ - unsigned char bi_r_version[30]; /* Version of the IBM ROM */ - unsigned int bi_memsize; /* DRAM installed, in bytes */ - unsigned char bi_enetaddr[6]; /* Local Ethernet MAC address */ - unsigned char bi_pci_enetaddr[6]; /* PCI Ethernet MAC address */ - unsigned int bi_intfreq; /* Processor speed, in Hz */ - unsigned int bi_busfreq; /* PLB Bus speed, in Hz */ - unsigned int bi_pci_busfreq; /* PCI Bus speed, in Hz */ -} bd_t; - -/* Some 4xx parts use a different timebase frequency from the internal clock. -*/ -#define bi_tbfreq bi_intfreq - +#include <asm/ppcboot.h> /* Memory map for the IBM "Walnut" 405GP evaluation board. * Generic 4xx plus RTC. */ -extern void *walnut_rtc_base; #define WALNUT_RTC_PADDR ((uint)0xf0000000) #define WALNUT_RTC_VADDR WALNUT_RTC_PADDR #define WALNUT_RTC_SIZE ((uint)8*1024) -#ifdef CONFIG_PPC405GP_INTERNAL_CLOCK -#define BASE_BAUD 201600 -#else #define BASE_BAUD 691200 -#endif #define WALNUT_PS2_BASE 0xF0100000 -#define WALNUT_FPGA_BASE 0xF0300000 + +/* Flash */ +#define PPC40x_FPGA_BASE 0xF0300000 +#define PPC40x_FPGA_REG_OFFS 5 /* offset to flash map reg */ +#define PPC40x_FLASH_ONBD_N(x) (x & 0x02) +#define PPC40x_FLASH_SRAM_SEL(x) (x & 0x01) +#define PPC40x_FLASH_LOW 0xFFF00000 +#define PPC40x_FLASH_HIGH 0xFFF80000 +#define PPC40x_FLASH_SIZE 0x80000 +#define WALNUT_FPGA_BASE PPC40x_FPGA_BASE #define PPC4xx_MACHINE_NAME "IBM Walnut" -#endif /* !__ASSEMBLY__ */ #endif /* __ASM_WALNUT_H__ */ #endif /* __KERNEL__ */ diff --git a/arch/ppc/platforms/4xx/yucca.c b/arch/ppc/platforms/4xx/yucca.c new file mode 100644 index 00000000000..e60f4bd437e --- /dev/null +++ b/arch/ppc/platforms/4xx/yucca.c @@ -0,0 +1,395 @@ +/* + * arch/ppc/platforms/4xx/yucca.c + * + * Yucca board specific routines + * + * Roland Dreier <rolandd@cisco.com> (based on luan.c by Matt Porter) + * + * Copyright 2004-2005 MontaVista Software Inc. + * Copyright (c) 2005 Cisco Systems. All rights reserved. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + */ + +#include <linux/config.h> +#include <linux/stddef.h> +#include <linux/kernel.h> +#include <linux/init.h> +#include <linux/errno.h> +#include <linux/reboot.h> +#include <linux/pci.h> +#include <linux/kdev_t.h> +#include <linux/types.h> +#include <linux/major.h> +#include <linux/blkdev.h> +#include <linux/console.h> +#include <linux/delay.h> +#include <linux/ide.h> +#include <linux/initrd.h> +#include <linux/seq_file.h> +#include <linux/root_dev.h> +#include <linux/tty.h> +#include <linux/serial.h> +#include <linux/serial_core.h> + +#include <asm/system.h> +#include <asm/pgtable.h> +#include <asm/page.h> +#include <asm/dma.h> +#include <asm/io.h> +#include <asm/machdep.h> +#include <asm/ocp.h> +#include <asm/pci-bridge.h> +#include <asm/time.h> +#include <asm/todc.h> +#include <asm/bootinfo.h> +#include <asm/ppc4xx_pic.h> +#include <asm/ppcboot.h> + +#include <syslib/ibm44x_common.h> +#include <syslib/ibm440gx_common.h> +#include <syslib/ibm440sp_common.h> +#include <syslib/ppc440spe_pcie.h> + +extern bd_t __res; + +static struct ibm44x_clocks clocks __initdata; + +static void __init +yucca_calibrate_decr(void) +{ + unsigned int freq; + + if (mfspr(SPRN_CCR1) & CCR1_TCS) + freq = YUCCA_TMR_CLK; + else + freq = clocks.cpu; + + ibm44x_calibrate_decr(freq); +} + +static int +yucca_show_cpuinfo(struct seq_file *m) +{ + seq_printf(m, "vendor\t\t: AMCC\n"); + seq_printf(m, "machine\t\t: PPC440SPe EVB (Yucca)\n"); + + return 0; +} + +static enum { + HOSE_UNKNOWN, + HOSE_PCIX, + HOSE_PCIE0, + HOSE_PCIE1, + HOSE_PCIE2 +} hose_type[4]; + +static inline int +yucca_map_irq(struct pci_dev *dev, unsigned char idsel, unsigned char pin) +{ + struct pci_controller *hose = pci_bus_to_hose(dev->bus->number); + + if (hose_type[hose->index] == HOSE_PCIX) { + static char pci_irq_table[][4] = + /* + * PCI IDSEL/INTPIN->INTLINE + * A B C D + */ + { + { 81, -1, -1, -1 }, /* IDSEL 1 - PCIX0 Slot 0 */ + }; + const long min_idsel = 1, max_idsel = 1, irqs_per_slot = 4; + return PCI_IRQ_TABLE_LOOKUP; + } else if (hose_type[hose->index] == HOSE_PCIE0) { + static char pci_irq_table[][4] = + /* + * PCI IDSEL/INTPIN->INTLINE + * A B C D + */ + { + { 96, 97, 98, 99 }, + }; + const long min_idsel = 1, max_idsel = 1, irqs_per_slot = 4; + return PCI_IRQ_TABLE_LOOKUP; + } else if (hose_type[hose->index] == HOSE_PCIE1) { + static char pci_irq_table[][4] = + /* + * PCI IDSEL/INTPIN->INTLINE + * A B C D + */ + { + { 100, 101, 102, 103 }, + }; + const long min_idsel = 1, max_idsel = 1, irqs_per_slot = 4; + return PCI_IRQ_TABLE_LOOKUP; + } else if (hose_type[hose->index] == HOSE_PCIE2) { + static char pci_irq_table[][4] = + /* + * PCI IDSEL/INTPIN->INTLINE + * A B C D + */ + { + { 104, 105, 106, 107 }, + }; + const long min_idsel = 1, max_idsel = 1, irqs_per_slot = 4; + return PCI_IRQ_TABLE_LOOKUP; + } + return -1; +} + +static void __init yucca_set_emacdata(void) +{ + struct ocp_def *def; + struct ocp_func_emac_data *emacdata; + + /* Set phy_map, phy_mode, and mac_addr for the EMAC */ + def = ocp_get_one_device(OCP_VENDOR_IBM, OCP_FUNC_EMAC, 0); + emacdata = def->additions; + emacdata->phy_map = 0x00000001; /* Skip 0x00 */ + emacdata->phy_mode = PHY_MODE_GMII; + memcpy(emacdata->mac_addr, __res.bi_enetaddr, 6); +} + +static int __init yucca_pcie_card_present(int port) +{ + void __iomem *pcie_fpga_base; + u16 reg; + + pcie_fpga_base = ioremap64(YUCCA_FPGA_REG_BASE, YUCCA_FPGA_REG_SIZE); + reg = in_be16(pcie_fpga_base + FPGA_REG1C); + iounmap(pcie_fpga_base); + + switch(port) { + case 0: return !(reg & FPGA_REG1C_PE0_PRSNT); + case 1: return !(reg & FPGA_REG1C_PE1_PRSNT); + case 2: return !(reg & FPGA_REG1C_PE2_PRSNT); + default: return 0; + } +} + +/* + * For the given slot, set rootpoint mode, send power to the slot, + * turn on the green LED and turn off the yellow LED, enable the clock + * and turn off reset. + */ +static void __init yucca_setup_pcie_fpga_rootpoint(int port) +{ + void __iomem *pcie_reg_fpga_base; + u16 power, clock, green_led, yellow_led, reset_off, rootpoint, endpoint; + + pcie_reg_fpga_base = ioremap64(YUCCA_FPGA_REG_BASE, YUCCA_FPGA_REG_SIZE); + + switch(port) { + case 0: + rootpoint = FPGA_REG1C_PE0_ROOTPOINT; + endpoint = 0; + power = FPGA_REG1A_PE0_PWRON; + green_led = FPGA_REG1A_PE0_GLED; + clock = FPGA_REG1A_PE0_REFCLK_ENABLE; + yellow_led = FPGA_REG1A_PE0_YLED; + reset_off = FPGA_REG1C_PE0_PERST; + break; + case 1: + rootpoint = 0; + endpoint = FPGA_REG1C_PE1_ENDPOINT; + power = FPGA_REG1A_PE1_PWRON; + green_led = FPGA_REG1A_PE1_GLED; + clock = FPGA_REG1A_PE1_REFCLK_ENABLE; + yellow_led = FPGA_REG1A_PE1_YLED; + reset_off = FPGA_REG1C_PE1_PERST; + break; + case 2: + rootpoint = 0; + endpoint = FPGA_REG1C_PE2_ENDPOINT; + power = FPGA_REG1A_PE2_PWRON; + green_led = FPGA_REG1A_PE2_GLED; + clock = FPGA_REG1A_PE2_REFCLK_ENABLE; + yellow_led = FPGA_REG1A_PE2_YLED; + reset_off = FPGA_REG1C_PE2_PERST; + break; + + default: + return; + } + + out_be16(pcie_reg_fpga_base + FPGA_REG1A, + ~(power | clock | green_led) & + (yellow_led | in_be16(pcie_reg_fpga_base + FPGA_REG1A))); + out_be16(pcie_reg_fpga_base + FPGA_REG1C, + ~(endpoint | reset_off) & + (rootpoint | in_be16(pcie_reg_fpga_base + FPGA_REG1C))); + + /* + * Leave device in reset for a while after powering on the + * slot to give it a chance to initialize. + */ + mdelay(250); + + out_be16(pcie_reg_fpga_base + FPGA_REG1C, + reset_off | in_be16(pcie_reg_fpga_base + FPGA_REG1C)); + + iounmap(pcie_reg_fpga_base); +} + +static void __init +yucca_setup_hoses(void) +{ + struct pci_controller *hose; + char name[20]; + int i; + + if (0 && ppc440spe_init_pcie()) { + printk(KERN_WARNING "PPC440SPe PCI Express initialization failed\n"); + return; + } + + for (i = 0; i <= 2; ++i) { + if (!yucca_pcie_card_present(i)) + continue; + + printk(KERN_INFO "PCIE%d: card present\n", i); + yucca_setup_pcie_fpga_rootpoint(i); + if (ppc440spe_init_pcie_rootport(i)) { + printk(KERN_WARNING "PCIE%d: initialization failed\n", i); + continue; + } + + hose = pcibios_alloc_controller(); + if (!hose) + return; + + sprintf(name, "PCIE%d host bridge", i); + pci_init_resource(&hose->io_resource, + YUCCA_PCIX_LOWER_IO, + YUCCA_PCIX_UPPER_IO, + IORESOURCE_IO, + name); + + hose->mem_space.start = YUCCA_PCIE_LOWER_MEM + + i * YUCCA_PCIE_MEM_SIZE; + hose->mem_space.end = hose->mem_space.start + + YUCCA_PCIE_MEM_SIZE - 1; + + pci_init_resource(&hose->mem_resources[0], + hose->mem_space.start, + hose->mem_space.end, + IORESOURCE_MEM, + name); + + hose->first_busno = 0; + hose->last_busno = 15; + hose_type[hose->index] = HOSE_PCIE0 + i; + + ppc440spe_setup_pcie(hose, i); + hose->last_busno = pciauto_bus_scan(hose, hose->first_busno); + } + + ppc_md.pci_swizzle = common_swizzle; + ppc_md.pci_map_irq = yucca_map_irq; +} + +TODC_ALLOC(); + +static void __init +yucca_early_serial_map(void) +{ + struct uart_port port; + + /* Setup ioremapped serial port access */ + memset(&port, 0, sizeof(port)); + port.membase = ioremap64(PPC440SPE_UART0_ADDR, 8); + port.irq = UART0_INT; + port.uartclk = clocks.uart0; + port.regshift = 0; + port.iotype = SERIAL_IO_MEM; + port.flags = ASYNC_BOOT_AUTOCONF | ASYNC_SKIP_TEST; + port.line = 0; + + if (early_serial_setup(&port) != 0) { + printk("Early serial init of port 0 failed\n"); + } + + port.membase = ioremap64(PPC440SPE_UART1_ADDR, 8); + port.irq = UART1_INT; + port.uartclk = clocks.uart1; + port.line = 1; + + if (early_serial_setup(&port) != 0) { + printk("Early serial init of port 1 failed\n"); + } + + port.membase = ioremap64(PPC440SPE_UART2_ADDR, 8); + port.irq = UART2_INT; + port.uartclk = BASE_BAUD; + port.line = 2; + + if (early_serial_setup(&port) != 0) { + printk("Early serial init of port 2 failed\n"); + } +} + +static void __init +yucca_setup_arch(void) +{ + yucca_set_emacdata(); + +#if !defined(CONFIG_BDI_SWITCH) + /* + * The Abatron BDI JTAG debugger does not tolerate others + * mucking with the debug registers. + */ + mtspr(SPRN_DBCR0, (DBCR0_TDE | DBCR0_IDM)); +#endif + + /* + * Determine various clocks. + * To be completely correct we should get SysClk + * from FPGA, because it can be changed by on-board switches + * --ebs + */ + /* 440GX and 440SPe clocking is the same - rd */ + ibm440gx_get_clocks(&clocks, 33333333, 6 * 1843200); + ocp_sys_info.opb_bus_freq = clocks.opb; + + /* init to some ~sane value until calibrate_delay() runs */ + loops_per_jiffy = 50000000/HZ; + + /* Setup PCIXn host bridges */ + yucca_setup_hoses(); + +#ifdef CONFIG_BLK_DEV_INITRD + if (initrd_start) + ROOT_DEV = Root_RAM0; + else +#endif +#ifdef CONFIG_ROOT_NFS + ROOT_DEV = Root_NFS; +#else + ROOT_DEV = Root_HDA1; +#endif + + yucca_early_serial_map(); + + /* Identify the system */ + printk("Yucca port (Roland Dreier <rolandd@cisco.com>)\n"); +} + +void __init platform_init(unsigned long r3, unsigned long r4, + unsigned long r5, unsigned long r6, unsigned long r7) +{ + ibm44x_platform_init(r3, r4, r5, r6, r7); + + ppc_md.setup_arch = yucca_setup_arch; + ppc_md.show_cpuinfo = yucca_show_cpuinfo; + ppc_md.find_end_of_memory = ibm440sp_find_end_of_memory; + ppc_md.get_irq = NULL; /* Set in ppc4xx_pic_init() */ + + ppc_md.calibrate_decr = yucca_calibrate_decr; +#ifdef CONFIG_KGDB + ppc_md.early_serial_map = yucca_early_serial_map; +#endif +} diff --git a/arch/ppc/platforms/4xx/yucca.h b/arch/ppc/platforms/4xx/yucca.h new file mode 100644 index 00000000000..01a4afea151 --- /dev/null +++ b/arch/ppc/platforms/4xx/yucca.h @@ -0,0 +1,111 @@ +/* + * arch/ppc/platforms/4xx/yucca.h + * + * Yucca board definitions + * + * Roland Dreier <rolandd@cisco.com> (based on luan.h by Matt Porter) + * + * Copyright 2004-2005 MontaVista Software Inc. + * Copyright (c) 2005 Cisco Systems. All rights reserved. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + * + */ + +#ifdef __KERNEL__ +#ifndef __ASM_YUCCA_H__ +#define __ASM_YUCCA_H__ + +#include <linux/config.h> +#include <platforms/4xx/ppc440spe.h> + +/* F/W TLB mapping used in bootloader glue to reset EMAC */ +#define PPC44x_EMAC0_MR0 0xa0000800 + +/* Location of MAC addresses in PIBS image */ +#define PIBS_FLASH_BASE 0xffe00000 +#define PIBS_MAC_BASE (PIBS_FLASH_BASE+0x1b0400) + +/* External timer clock frequency */ +#define YUCCA_TMR_CLK 25000000 + +/* + * FPGA registers + */ +#define YUCCA_FPGA_REG_BASE 0x00000004e2000000ULL +#define YUCCA_FPGA_REG_SIZE 0x24 + +#define FPGA_REG1A 0x1a + +#define FPGA_REG1A_PE0_GLED 0x8000 +#define FPGA_REG1A_PE1_GLED 0x4000 +#define FPGA_REG1A_PE2_GLED 0x2000 +#define FPGA_REG1A_PE0_YLED 0x1000 +#define FPGA_REG1A_PE1_YLED 0x0800 +#define FPGA_REG1A_PE2_YLED 0x0400 +#define FPGA_REG1A_PE0_PWRON 0x0200 +#define FPGA_REG1A_PE1_PWRON 0x0100 +#define FPGA_REG1A_PE2_PWRON 0x0080 +#define FPGA_REG1A_PE0_REFCLK_ENABLE 0x0040 +#define FPGA_REG1A_PE1_REFCLK_ENABLE 0x0020 +#define FPGA_REG1A_PE2_REFCLK_ENABLE 0x0010 +#define FPGA_REG1A_PE_SPREAD0 0x0008 +#define FPGA_REG1A_PE_SPREAD1 0x0004 +#define FPGA_REG1A_PE_SELSOURCE_0 0x0002 +#define FPGA_REG1A_PE_SELSOURCE_1 0x0001 + +#define FPGA_REG1C 0x1c + +#define FPGA_REG1C_PE0_ROOTPOINT 0x8000 +#define FPGA_REG1C_PE1_ENDPOINT 0x4000 +#define FPGA_REG1C_PE2_ENDPOINT 0x2000 +#define FPGA_REG1C_PE0_PRSNT 0x1000 +#define FPGA_REG1C_PE1_PRSNT 0x0800 +#define FPGA_REG1C_PE2_PRSNT 0x0400 +#define FPGA_REG1C_PE0_WAKE 0x0080 +#define FPGA_REG1C_PE1_WAKE 0x0040 +#define FPGA_REG1C_PE2_WAKE 0x0020 +#define FPGA_REG1C_PE0_PERST 0x0010 +#define FPGA_REG1C_PE1_PERST 0x0008 +#define FPGA_REG1C_PE2_PERST 0x0004 + +/* + * Serial port defines + */ +#define RS_TABLE_SIZE 3 + +/* PIBS defined UART mappings, used before early_serial_setup */ +#define UART0_IO_BASE 0xa0000200 +#define UART1_IO_BASE 0xa0000300 +#define UART2_IO_BASE 0xa0000600 + +#define BASE_BAUD 11059200 +#define STD_UART_OP(num) \ + { 0, BASE_BAUD, 0, UART##num##_INT, \ + (ASYNC_BOOT_AUTOCONF | ASYNC_SKIP_TEST), \ + iomem_base: (void*)UART##num##_IO_BASE, \ + io_type: SERIAL_IO_MEM}, + +#define SERIAL_PORT_DFNS \ + STD_UART_OP(0) \ + STD_UART_OP(1) \ + STD_UART_OP(2) + +/* PCI support */ +#define YUCCA_PCIX_LOWER_IO 0x00000000 +#define YUCCA_PCIX_UPPER_IO 0x0000ffff +#define YUCCA_PCIX_LOWER_MEM 0x80000000 +#define YUCCA_PCIX_UPPER_MEM 0x8fffffff +#define YUCCA_PCIE_LOWER_MEM 0x90000000 +#define YUCCA_PCIE_MEM_SIZE 0x10000000 + +#define YUCCA_PCIX_MEM_SIZE 0x10000000 +#define YUCCA_PCIX_MEM_OFFSET 0x00000000 +#define YUCCA_PCIE_MEM_SIZE 0x10000000 +#define YUCCA_PCIE_MEM_OFFSET 0x00000000 + +#endif /* __ASM_YUCCA_H__ */ +#endif /* __KERNEL__ */ diff --git a/arch/ppc/platforms/85xx/mpc85xx_ads_common.c b/arch/ppc/platforms/85xx/mpc85xx_ads_common.c index bd3ac013675..16ad092d8a0 100644 --- a/arch/ppc/platforms/85xx/mpc85xx_ads_common.c +++ b/arch/ppc/platforms/85xx/mpc85xx_ads_common.c @@ -45,6 +45,8 @@ #include <mm/mmu_decl.h> +#include <syslib/ppc85xx_rio.h> + #include <platforms/85xx/mpc85xx_ads_common.h> #ifndef CONFIG_PCI @@ -189,3 +191,11 @@ mpc85xx_exclude_device(u_char bus, u_char devfn) } #endif /* CONFIG_PCI */ + +#ifdef CONFIG_RAPIDIO +void platform_rio_init(void) +{ + /* 512MB RIO LAW at 0xc0000000 */ + mpc85xx_rio_setup(0xc0000000, 0x20000000); +} +#endif /* CONFIG_RAPIDIO */ diff --git a/arch/ppc/platforms/85xx/stx_gp3.c b/arch/ppc/platforms/85xx/stx_gp3.c index 1e1b85f8193..15ce9d07063 100644 --- a/arch/ppc/platforms/85xx/stx_gp3.c +++ b/arch/ppc/platforms/85xx/stx_gp3.c @@ -37,6 +37,7 @@ #include <linux/module.h> #include <linux/fsl_devices.h> #include <linux/interrupt.h> +#include <linux/rio.h> #include <asm/system.h> #include <asm/pgtable.h> @@ -57,6 +58,7 @@ #include <syslib/cpm2_pic.h> #include <syslib/ppc85xx_common.h> +#include <syslib/ppc85xx_rio.h> unsigned char __res[sizeof(bd_t)]; @@ -273,6 +275,18 @@ int mpc85xx_exclude_device(u_char bus, u_char devfn) } #endif /* CONFIG_PCI */ +#ifdef CONFIG_RAPIDIO +void +platform_rio_init(void) +{ + /* + * The STx firmware configures the RapidIO Local Access Window + * at 0xc0000000 with a size of 512MB. + */ + mpc85xx_rio_setup(0xc0000000, 0x20000000); +} +#endif /* CONFIG_RAPIDIO */ + void __init platform_init(unsigned long r3, unsigned long r4, unsigned long r5, unsigned long r6, unsigned long r7) diff --git a/arch/ppc/platforms/ev64360.c b/arch/ppc/platforms/ev64360.c index b1324564456..b9d844f88c2 100644 --- a/arch/ppc/platforms/ev64360.c +++ b/arch/ppc/platforms/ev64360.c @@ -52,6 +52,8 @@ static u32 ev64360_bus_frequency; unsigned char __res[sizeof(bd_t)]; +TODC_ALLOC(); + static int __init ev64360_map_irq(struct pci_dev *dev, unsigned char idsel, unsigned char pin) { @@ -182,6 +184,9 @@ ev64360_setup_peripherals(void) EV64360_RTC_WINDOW_BASE, EV64360_RTC_WINDOW_SIZE, 0); bh.ci->enable_window_32bit(&bh, MV64x60_CPU2DEV_1_WIN); + TODC_INIT(TODC_TYPE_DS1501, 0, 0, + ioremap(EV64360_RTC_WINDOW_BASE, EV64360_RTC_WINDOW_SIZE), 8); + mv64x60_set_32bit_window(&bh, MV64x60_CPU2SRAM_WIN, EV64360_INTERNAL_SRAM_BASE, MV64360_SRAM_SIZE, 0); bh.ci->enable_window_32bit(&bh, MV64x60_CPU2SRAM_WIN); @@ -496,6 +501,13 @@ platform_init(unsigned long r3, unsigned long r4, unsigned long r5, ppc_md.power_off = ev64360_power_off; ppc_md.halt = ev64360_halt; ppc_md.find_end_of_memory = ev64360_find_end_of_memory; + ppc_md.init = NULL; + + ppc_md.time_init = todc_time_init; + ppc_md.set_rtc_time = todc_set_rtc_time; + ppc_md.get_rtc_time = todc_get_rtc_time; + ppc_md.nvram_read_val = todc_direct_read_val; + ppc_md.nvram_write_val = todc_direct_write_val; ppc_md.calibrate_decr = ev64360_calibrate_decr; #if defined(CONFIG_SERIAL_TEXT_DEBUG) && defined(CONFIG_SERIAL_MPSC_CONSOLE) diff --git a/arch/ppc/syslib/Makefile b/arch/ppc/syslib/Makefile index b4ef15b45c4..5bd33baac24 100644 --- a/arch/ppc/syslib/Makefile +++ b/arch/ppc/syslib/Makefile @@ -15,6 +15,7 @@ obj-$(CONFIG_440EP) += ibm440gx_common.o obj-$(CONFIG_440GP) += ibm440gp_common.o obj-$(CONFIG_440GX) += ibm440gx_common.o obj-$(CONFIG_440SP) += ibm440gx_common.o ibm440sp_common.o +obj-$(CONFIG_440SPE) += ibm440gx_common.o ibm440sp_common.o ppc440spe_pcie.o ifeq ($(CONFIG_4xx),y) ifeq ($(CONFIG_VIRTEX_II_PRO),y) obj-$(CONFIG_40x) += xilinx_pic.o @@ -32,6 +33,7 @@ obj-$(CONFIG_PPC4xx_DMA) += ppc4xx_dma.o obj-$(CONFIG_PPC4xx_EDMA) += ppc4xx_sgdma.o ifeq ($(CONFIG_40x),y) obj-$(CONFIG_PCI) += pci_auto.o ppc405_pci.o +obj-$(CONFIG_RAPIDIO) += ppc85xx_rio.o endif endif obj-$(CONFIG_8xx) += m8xx_setup.o ppc8xx_pic.o $(wdt-mpc8xx-y) \ @@ -46,12 +48,14 @@ obj-$(CONFIG_BAMBOO) += pci_auto.o todc_time.o obj-$(CONFIG_CPCI690) += todc_time.o pci_auto.o obj-$(CONFIG_EBONY) += pci_auto.o todc_time.o obj-$(CONFIG_EV64260) += todc_time.o pci_auto.o +obj-$(CONFIG_EV64360) += todc_time.o obj-$(CONFIG_CHESTNUT) += mv64360_pic.o pci_auto.o obj-$(CONFIG_GEMINI) += open_pic.o obj-$(CONFIG_GT64260) += gt64260_pic.o obj-$(CONFIG_LOPEC) += pci_auto.o todc_time.o obj-$(CONFIG_HDPU) += pci_auto.o obj-$(CONFIG_LUAN) += pci_auto.o todc_time.o +obj-$(CONFIG_YUCCA) += pci_auto.o todc_time.o obj-$(CONFIG_KATANA) += pci_auto.o obj-$(CONFIG_MV64360) += mv64360_pic.o obj-$(CONFIG_MV64X60) += mv64x60.o mv64x60_win.o diff --git a/arch/ppc/syslib/ibm440sp_common.c b/arch/ppc/syslib/ibm440sp_common.c index 417d4cff77a..cdafda127d8 100644 --- a/arch/ppc/syslib/ibm440sp_common.c +++ b/arch/ppc/syslib/ibm440sp_common.c @@ -1,7 +1,7 @@ /* * arch/ppc/syslib/ibm440sp_common.c * - * PPC440SP system library + * PPC440SP/PPC440SPe system library * * Matt Porter <mporter@kernel.crashing.org> * Copyright 2002-2005 MontaVista Software Inc. @@ -35,7 +35,7 @@ unsigned long __init ibm440sp_find_end_of_memory(void) u32 mem_size = 0; /* Read two bank sizes and sum */ - for (i=0; i<2; i++) + for (i=0; i< MQ0_NUM_BANKS; i++) switch (mfdcr(DCRN_MQ0_BS0BAS + i) & MQ0_CONFIG_SIZE_MASK) { case MQ0_CONFIG_SIZE_8M: mem_size += PPC44x_MEM_SIZE_8M; diff --git a/arch/ppc/syslib/ibm44x_common.c b/arch/ppc/syslib/ibm44x_common.c index 5152c8e4134..71db11d2215 100644 --- a/arch/ppc/syslib/ibm44x_common.c +++ b/arch/ppc/syslib/ibm44x_common.c @@ -20,6 +20,7 @@ #include <linux/types.h> #include <linux/serial.h> #include <linux/module.h> +#include <linux/initrd.h> #include <asm/ibm44x.h> #include <asm/mmu.h> @@ -214,9 +215,20 @@ void __init ibm44x_platform_init(unsigned long r3, unsigned long r4, unsigned lo /* Called from machine_check_exception */ void platform_machine_check(struct pt_regs *regs) { +#if defined(CONFIG_440SP) || defined(CONFIG_440SPE) + printk("PLB0: BEAR=0x%08x%08x ACR= 0x%08x BESR= 0x%08x%08x\n", + mfdcr(DCRN_PLB0_BEARH), mfdcr(DCRN_PLB0_BEARL), + mfdcr(DCRN_PLB0_ACR), mfdcr(DCRN_PLB0_BESRH), + mfdcr(DCRN_PLB0_BESRL)); + printk("PLB1: BEAR=0x%08x%08x ACR= 0x%08x BESR= 0x%08x%08x\n", + mfdcr(DCRN_PLB1_BEARH), mfdcr(DCRN_PLB1_BEARL), + mfdcr(DCRN_PLB1_ACR), mfdcr(DCRN_PLB1_BESRH), + mfdcr(DCRN_PLB1_BESRL)); +#else printk("PLB0: BEAR=0x%08x%08x ACR= 0x%08x BESR= 0x%08x\n", mfdcr(DCRN_PLB0_BEARH), mfdcr(DCRN_PLB0_BEARL), mfdcr(DCRN_PLB0_ACR), mfdcr(DCRN_PLB0_BESR)); +#endif printk("POB0: BEAR=0x%08x%08x BESR0=0x%08x BESR1=0x%08x\n", mfdcr(DCRN_POB0_BEARH), mfdcr(DCRN_POB0_BEARL), mfdcr(DCRN_POB0_BESR0), mfdcr(DCRN_POB0_BESR1)); diff --git a/arch/ppc/syslib/m8xx_wdt.c b/arch/ppc/syslib/m8xx_wdt.c index c5ac5ce5d7d..a21632d37e5 100644 --- a/arch/ppc/syslib/m8xx_wdt.c +++ b/arch/ppc/syslib/m8xx_wdt.c @@ -14,6 +14,7 @@ #include <linux/irq.h> #include <linux/kernel.h> #include <linux/sched.h> +#include <asm/io.h> #include <asm/8xx_immap.h> #include <syslib/m8xx_wdt.h> @@ -29,8 +30,8 @@ void m8xx_wdt_reset(void) { volatile immap_t *imap = (volatile immap_t *)IMAP_ADDR; - out_be16(imap->im_siu_conf.sc_swsr, 0x556c); /* write magic1 */ - out_be16(imap->im_siu_conf.sc_swsr, 0xaa39); /* write magic2 */ + out_be16(&imap->im_siu_conf.sc_swsr, 0x556c); /* write magic1 */ + out_be16(&imap->im_siu_conf.sc_swsr, 0xaa39); /* write magic2 */ } static irqreturn_t m8xx_wdt_interrupt(int irq, void *dev, struct pt_regs *regs) @@ -39,7 +40,7 @@ static irqreturn_t m8xx_wdt_interrupt(int irq, void *dev, struct pt_regs *regs) m8xx_wdt_reset(); - out_be16(imap->im_sit.sit_piscr, in_be16(imap->im_sit.sit_piscr | PISCR_PS)); /* clear irq */ + out_be16(&imap->im_sit.sit_piscr, in_be16(&imap->im_sit.sit_piscr) | PISCR_PS); /* clear irq */ return IRQ_HANDLED; } @@ -51,7 +52,7 @@ void __init m8xx_wdt_handler_install(bd_t * binfo) u32 sypcr; u32 pitrtclk; - sypcr = in_be32(imap->im_siu_conf.sc_sypcr); + sypcr = in_be32(&imap->im_siu_conf.sc_sypcr); if (!(sypcr & 0x04)) { printk(KERN_NOTICE "m8xx_wdt: wdt disabled (SYPCR: 0x%08X)\n", @@ -87,9 +88,9 @@ void __init m8xx_wdt_handler_install(bd_t * binfo) else pitc = pitrtclk * wdt_timeout / binfo->bi_intfreq / 2; - out_be32(imap->im_sit.sit_pitc, pitc << 16); + out_be32(&imap->im_sit.sit_pitc, pitc << 16); - out_be16(imap->im_sit.sit_piscr, (mk_int_int_mask(PIT_INTERRUPT) << 8) | PISCR_PIE | PISCR_PTE); + out_be16(&imap->im_sit.sit_piscr, (mk_int_int_mask(PIT_INTERRUPT) << 8) | PISCR_PIE | PISCR_PTE); if (setup_irq(PIT_INTERRUPT, &m8xx_wdt_irqaction)) panic("m8xx_wdt: error setting up the watchdog irq!"); diff --git a/arch/ppc/syslib/ppc405_pci.c b/arch/ppc/syslib/ppc405_pci.c index 81c83bf98df..d6d838b16da 100644 --- a/arch/ppc/syslib/ppc405_pci.c +++ b/arch/ppc/syslib/ppc405_pci.c @@ -89,13 +89,6 @@ ppc4xx_find_bridges(void) isa_mem_base = 0; pci_dram_offset = 0; -#if (PSR_PCI_ARBIT_EN > 1) - /* Check if running in slave mode */ - if ((mfdcr(DCRN_CHPSR) & PSR_PCI_ARBIT_EN) == 0) { - printk("Running as PCI slave, kernel PCI disabled !\n"); - return; - } -#endif /* Setup PCI32 hose */ hose_a = pcibios_alloc_controller(); if (!hose_a) diff --git a/arch/ppc/syslib/ppc440spe_pcie.c b/arch/ppc/syslib/ppc440spe_pcie.c new file mode 100644 index 00000000000..1509fc1ddfb --- /dev/null +++ b/arch/ppc/syslib/ppc440spe_pcie.c @@ -0,0 +1,442 @@ +/* + * Copyright (c) 2005 Cisco Systems. All rights reserved. + * Roland Dreier <rolandd@cisco.com> + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + */ + +#include <linux/config.h> +#include <linux/kernel.h> +#include <linux/delay.h> +#include <linux/pci.h> +#include <linux/init.h> + +#include <asm/reg.h> +#include <asm/io.h> +#include <asm/ibm44x.h> + +#include "ppc440spe_pcie.h" + +static int +pcie_read_config(struct pci_bus *bus, unsigned int devfn, int offset, + int len, u32 *val) +{ + struct pci_controller *hose = bus->sysdata; + + if (PCI_SLOT(devfn) != 1) + return PCIBIOS_DEVICE_NOT_FOUND; + + offset += devfn << 12; + + /* + * Note: the caller has already checked that offset is + * suitably aligned and that len is 1, 2 or 4. + */ + switch (len) { + case 1: + *val = in_8(hose->cfg_data + offset); + break; + case 2: + *val = in_le16(hose->cfg_data + offset); + break; + default: + *val = in_le32(hose->cfg_data + offset); + break; + } + + if (0) printk("%s: read %x(%d) @ %x\n", __func__, *val, len, offset); + + return PCIBIOS_SUCCESSFUL; +} + +static int +pcie_write_config(struct pci_bus *bus, unsigned int devfn, int offset, + int len, u32 val) +{ + struct pci_controller *hose = bus->sysdata; + + if (PCI_SLOT(devfn) != 1) + return PCIBIOS_DEVICE_NOT_FOUND; + + offset += devfn << 12; + + switch (len) { + case 1: + out_8(hose->cfg_data + offset, val); + break; + case 2: + out_le16(hose->cfg_data + offset, val); + break; + default: + out_le32(hose->cfg_data + offset, val); + break; + } + return PCIBIOS_SUCCESSFUL; +} + +static struct pci_ops pcie_pci_ops = +{ + .read = pcie_read_config, + .write = pcie_write_config +}; + +enum { + PTYPE_ENDPOINT = 0x0, + PTYPE_LEGACY_ENDPOINT = 0x1, + PTYPE_ROOT_PORT = 0x4, + + LNKW_X1 = 0x1, + LNKW_X4 = 0x4, + LNKW_X8 = 0x8 +}; + +static void check_error(void) +{ + u32 valPE0, valPE1, valPE2; + + /* SDR0_PEGPLLLCT1 reset */ + if (!(valPE0 = SDR_READ(PESDR0_PLLLCT1) & 0x01000000)) { + printk(KERN_INFO "PCIE: SDR0_PEGPLLLCT1 reset error 0x%8x\n", valPE0); + } + + valPE0 = SDR_READ(PESDR0_RCSSET); + valPE1 = SDR_READ(PESDR1_RCSSET); + valPE2 = SDR_READ(PESDR2_RCSSET); + + /* SDR0_PExRCSSET rstgu */ + if ( !(valPE0 & 0x01000000) || + !(valPE1 & 0x01000000) || + !(valPE2 & 0x01000000)) { + printk(KERN_INFO "PCIE: SDR0_PExRCSSET rstgu error\n"); + } + + /* SDR0_PExRCSSET rstdl */ + if ( !(valPE0 & 0x00010000) || + !(valPE1 & 0x00010000) || + !(valPE2 & 0x00010000)) { + printk(KERN_INFO "PCIE: SDR0_PExRCSSET rstdl error\n"); + } + + /* SDR0_PExRCSSET rstpyn */ + if ( (valPE0 & 0x00001000) || + (valPE1 & 0x00001000) || + (valPE2 & 0x00001000)) { + printk(KERN_INFO "PCIE: SDR0_PExRCSSET rstpyn error\n"); + } + + /* SDR0_PExRCSSET hldplb */ + if ( (valPE0 & 0x10000000) || + (valPE1 & 0x10000000) || + (valPE2 & 0x10000000)) { + printk(KERN_INFO "PCIE: SDR0_PExRCSSET hldplb error\n"); + } + + /* SDR0_PExRCSSET rdy */ + if ( (valPE0 & 0x00100000) || + (valPE1 & 0x00100000) || + (valPE2 & 0x00100000)) { + printk(KERN_INFO "PCIE: SDR0_PExRCSSET rdy error\n"); + } + + /* SDR0_PExRCSSET shutdown */ + if ( (valPE0 & 0x00000100) || + (valPE1 & 0x00000100) || + (valPE2 & 0x00000100)) { + printk(KERN_INFO "PCIE: SDR0_PExRCSSET shutdown error\n"); + } +} + +/* + * Initialize PCI Express core as described in User Manual section 27.12.1 + */ +int ppc440spe_init_pcie(void) +{ + /* Set PLL clock receiver to LVPECL */ + SDR_WRITE(PESDR0_PLLLCT1, SDR_READ(PESDR0_PLLLCT1) | 1 << 28); + + check_error(); + + printk(KERN_INFO "PCIE initialization OK\n"); + + if (!(SDR_READ(PESDR0_PLLLCT2) & 0x10000)) + printk(KERN_INFO "PESDR_PLLCT2 resistance calibration failed (0x%08x)\n", + SDR_READ(PESDR0_PLLLCT2)); + + /* De-assert reset of PCIe PLL, wait for lock */ + SDR_WRITE(PESDR0_PLLLCT1, SDR_READ(PESDR0_PLLLCT1) & ~(1 << 24)); + udelay(3); + + return 0; +} + +int ppc440spe_init_pcie_rootport(int port) +{ + static int core_init; + void __iomem *utl_base; + u32 val = 0; + int i; + + if (!core_init) { + ++core_init; + i = ppc440spe_init_pcie(); + if (i) + return i; + } + + /* + * Initialize various parts of the PCI Express core for our port: + * + * - Set as a root port and enable max width + * (PXIE0 -> X8, PCIE1 and PCIE2 -> X4). + * - Set up UTL configuration. + * - Increase SERDES drive strength to levels suggested by AMCC. + * - De-assert RSTPYN, RSTDL and RSTGU. + */ + switch (port) { + case 0: + SDR_WRITE(PESDR0_DLPSET, PTYPE_ROOT_PORT << 20 | LNKW_X8 << 12); + + SDR_WRITE(PESDR0_UTLSET1, 0x21222222); + SDR_WRITE(PESDR0_UTLSET2, 0x11000000); + + SDR_WRITE(PESDR0_HSSL0SET1, 0x35000000); + SDR_WRITE(PESDR0_HSSL1SET1, 0x35000000); + SDR_WRITE(PESDR0_HSSL2SET1, 0x35000000); + SDR_WRITE(PESDR0_HSSL3SET1, 0x35000000); + SDR_WRITE(PESDR0_HSSL4SET1, 0x35000000); + SDR_WRITE(PESDR0_HSSL5SET1, 0x35000000); + SDR_WRITE(PESDR0_HSSL6SET1, 0x35000000); + SDR_WRITE(PESDR0_HSSL7SET1, 0x35000000); + + SDR_WRITE(PESDR0_RCSSET, + (SDR_READ(PESDR0_RCSSET) & ~(1 << 24 | 1 << 16)) | 1 << 12); + break; + + case 1: + SDR_WRITE(PESDR1_DLPSET, PTYPE_ROOT_PORT << 20 | LNKW_X4 << 12); + + SDR_WRITE(PESDR1_UTLSET1, 0x21222222); + SDR_WRITE(PESDR1_UTLSET2, 0x11000000); + + SDR_WRITE(PESDR1_HSSL0SET1, 0x35000000); + SDR_WRITE(PESDR1_HSSL1SET1, 0x35000000); + SDR_WRITE(PESDR1_HSSL2SET1, 0x35000000); + SDR_WRITE(PESDR1_HSSL3SET1, 0x35000000); + + SDR_WRITE(PESDR1_RCSSET, + (SDR_READ(PESDR1_RCSSET) & ~(1 << 24 | 1 << 16)) | 1 << 12); + break; + + case 2: + SDR_WRITE(PESDR2_DLPSET, PTYPE_ROOT_PORT << 20 | LNKW_X4 << 12); + + SDR_WRITE(PESDR2_UTLSET1, 0x21222222); + SDR_WRITE(PESDR2_UTLSET2, 0x11000000); + + SDR_WRITE(PESDR2_HSSL0SET1, 0x35000000); + SDR_WRITE(PESDR2_HSSL1SET1, 0x35000000); + SDR_WRITE(PESDR2_HSSL2SET1, 0x35000000); + SDR_WRITE(PESDR2_HSSL3SET1, 0x35000000); + + SDR_WRITE(PESDR2_RCSSET, + (SDR_READ(PESDR2_RCSSET) & ~(1 << 24 | 1 << 16)) | 1 << 12); + break; + } + + mdelay(1000); + + switch (port) { + case 0: val = SDR_READ(PESDR0_RCSSTS); break; + case 1: val = SDR_READ(PESDR1_RCSSTS); break; + case 2: val = SDR_READ(PESDR2_RCSSTS); break; + } + + if (!(val & (1 << 20))) + printk(KERN_INFO "PCIE%d: PGRST inactive\n", port); + else + printk(KERN_WARNING "PGRST for PCIE%d failed %08x\n", port, val); + + switch (port) { + case 0: printk(KERN_INFO "PCIE0: LOOP %08x\n", SDR_READ(PESDR0_LOOP)); break; + case 1: printk(KERN_INFO "PCIE1: LOOP %08x\n", SDR_READ(PESDR1_LOOP)); break; + case 2: printk(KERN_INFO "PCIE2: LOOP %08x\n", SDR_READ(PESDR2_LOOP)); break; + } + + /* + * Map UTL registers at 0xc_1000_0n00 + */ + switch (port) { + case 0: + mtdcr(DCRN_PEGPL_REGBAH(PCIE0), 0x0000000c); + mtdcr(DCRN_PEGPL_REGBAL(PCIE0), 0x10000000); + mtdcr(DCRN_PEGPL_REGMSK(PCIE0), 0x00007001); + mtdcr(DCRN_PEGPL_SPECIAL(PCIE0), 0x68782800); + break; + + case 1: + mtdcr(DCRN_PEGPL_REGBAH(PCIE1), 0x0000000c); + mtdcr(DCRN_PEGPL_REGBAL(PCIE1), 0x10001000); + mtdcr(DCRN_PEGPL_REGMSK(PCIE1), 0x00007001); + mtdcr(DCRN_PEGPL_SPECIAL(PCIE1), 0x68782800); + break; + + case 2: + mtdcr(DCRN_PEGPL_REGBAH(PCIE2), 0x0000000c); + mtdcr(DCRN_PEGPL_REGBAL(PCIE2), 0x10002000); + mtdcr(DCRN_PEGPL_REGMSK(PCIE2), 0x00007001); + mtdcr(DCRN_PEGPL_SPECIAL(PCIE2), 0x68782800); + } + + utl_base = ioremap64(0xc10000000ull + 0x1000 * port, 0x100); + + /* + * Set buffer allocations and then assert VRB and TXE. + */ + out_be32(utl_base + PEUTL_OUTTR, 0x08000000); + out_be32(utl_base + PEUTL_INTR, 0x02000000); + out_be32(utl_base + PEUTL_OPDBSZ, 0x10000000); + out_be32(utl_base + PEUTL_PBBSZ, 0x53000000); + out_be32(utl_base + PEUTL_IPHBSZ, 0x08000000); + out_be32(utl_base + PEUTL_IPDBSZ, 0x10000000); + out_be32(utl_base + PEUTL_RCIRQEN, 0x00f00000); + out_be32(utl_base + PEUTL_PCTL, 0x80800066); + + iounmap(utl_base); + + /* + * We map PCI Express configuration access into the 512MB regions + * PCIE0: 0xc_4000_0000 + * PCIE1: 0xc_8000_0000 + * PCIE2: 0xc_c000_0000 + */ + switch (port) { + case 0: + mtdcr(DCRN_PEGPL_CFGBAH(PCIE0), 0x0000000c); + mtdcr(DCRN_PEGPL_CFGBAL(PCIE0), 0x40000000); + mtdcr(DCRN_PEGPL_CFGMSK(PCIE0), 0xe0000001); /* 512MB region, valid */ + break; + + case 1: + mtdcr(DCRN_PEGPL_CFGBAH(PCIE1), 0x0000000c); + mtdcr(DCRN_PEGPL_CFGBAL(PCIE1), 0x80000000); + mtdcr(DCRN_PEGPL_CFGMSK(PCIE1), 0xe0000001); /* 512MB region, valid */ + break; + + case 2: + mtdcr(DCRN_PEGPL_CFGBAH(PCIE2), 0x0000000c); + mtdcr(DCRN_PEGPL_CFGBAL(PCIE2), 0xc0000000); + mtdcr(DCRN_PEGPL_CFGMSK(PCIE2), 0xe0000001); /* 512MB region, valid */ + break; + } + + /* + * Check for VC0 active and assert RDY. + */ + switch (port) { + case 0: + if (!(SDR_READ(PESDR0_RCSSTS) & (1 << 16))) + printk(KERN_WARNING "PCIE0: VC0 not active\n"); + SDR_WRITE(PESDR0_RCSSET, SDR_READ(PESDR0_RCSSET) | 1 << 20); + break; + case 1: + if (!(SDR_READ(PESDR1_RCSSTS) & (1 << 16))) + printk(KERN_WARNING "PCIE0: VC0 not active\n"); + SDR_WRITE(PESDR1_RCSSET, SDR_READ(PESDR1_RCSSET) | 1 << 20); + break; + case 2: + if (!(SDR_READ(PESDR2_RCSSTS) & (1 << 16))) + printk(KERN_WARNING "PCIE0: VC0 not active\n"); + SDR_WRITE(PESDR2_RCSSET, SDR_READ(PESDR2_RCSSET) | 1 << 20); + break; + } + +#if 0 + /* Dump all config regs */ + for (i = 0x300; i <= 0x320; ++i) + printk("[%04x] 0x%08x\n", i, SDR_READ(i)); + for (i = 0x340; i <= 0x353; ++i) + printk("[%04x] 0x%08x\n", i, SDR_READ(i)); + for (i = 0x370; i <= 0x383; ++i) + printk("[%04x] 0x%08x\n", i, SDR_READ(i)); + for (i = 0x3a0; i <= 0x3a2; ++i) + printk("[%04x] 0x%08x\n", i, SDR_READ(i)); + for (i = 0x3c0; i <= 0x3c3; ++i) + printk("[%04x] 0x%08x\n", i, SDR_READ(i)); +#endif + + mdelay(100); + + return 0; +} + +void ppc440spe_setup_pcie(struct pci_controller *hose, int port) +{ + void __iomem *mbase; + + /* + * Map 16MB, which is enough for 4 bits of bus # + */ + hose->cfg_data = ioremap64(0xc40000000ull + port * 0x40000000, + 1 << 24); + hose->ops = &pcie_pci_ops; + + /* + * Set bus numbers on our root port + */ + mbase = ioremap64(0xc50000000ull + port * 0x40000000, 4096); + out_8(mbase + PCI_PRIMARY_BUS, 0); + out_8(mbase + PCI_SECONDARY_BUS, 0); + + /* + * Set up outbound translation to hose->mem_space from PLB + * addresses at an offset of 0xd_0000_0000. We set the low + * bits of the mask to 11 to turn off splitting into 8 + * subregions and to enable the outbound translation. + */ + out_le32(mbase + PECFG_POM0LAH, 0); + out_le32(mbase + PECFG_POM0LAL, hose->mem_space.start); + + switch (port) { + case 0: + mtdcr(DCRN_PEGPL_OMR1BAH(PCIE0), 0x0000000d); + mtdcr(DCRN_PEGPL_OMR1BAL(PCIE0), hose->mem_space.start); + mtdcr(DCRN_PEGPL_OMR1MSKH(PCIE0), 0x7fffffff); + mtdcr(DCRN_PEGPL_OMR1MSKL(PCIE0), + ~(hose->mem_space.end - hose->mem_space.start) | 3); + break; + case 1: + mtdcr(DCRN_PEGPL_OMR1BAH(PCIE1), 0x0000000d); + mtdcr(DCRN_PEGPL_OMR1BAL(PCIE1), hose->mem_space.start); + mtdcr(DCRN_PEGPL_OMR1MSKH(PCIE1), 0x7fffffff); + mtdcr(DCRN_PEGPL_OMR1MSKL(PCIE1), + ~(hose->mem_space.end - hose->mem_space.start) | 3); + + break; + case 2: + mtdcr(DCRN_PEGPL_OMR1BAH(PCIE2), 0x0000000d); + mtdcr(DCRN_PEGPL_OMR1BAL(PCIE2), hose->mem_space.start); + mtdcr(DCRN_PEGPL_OMR1MSKH(PCIE2), 0x7fffffff); + mtdcr(DCRN_PEGPL_OMR1MSKL(PCIE2), + ~(hose->mem_space.end - hose->mem_space.start) | 3); + break; + } + + /* Set up 16GB inbound memory window at 0 */ + out_le32(mbase + PCI_BASE_ADDRESS_0, 0); + out_le32(mbase + PCI_BASE_ADDRESS_1, 0); + out_le32(mbase + PECFG_BAR0HMPA, 0x7fffffc); + out_le32(mbase + PECFG_BAR0LMPA, 0); + out_le32(mbase + PECFG_PIM0LAL, 0); + out_le32(mbase + PECFG_PIM0LAH, 0); + out_le32(mbase + PECFG_PIMEN, 0x1); + + /* Enable I/O, Mem, and Busmaster cycles */ + out_le16(mbase + PCI_COMMAND, + in_le16(mbase + PCI_COMMAND) | + PCI_COMMAND_IO | PCI_COMMAND_MEMORY | PCI_COMMAND_MASTER); + + iounmap(mbase); +} diff --git a/arch/ppc/syslib/ppc440spe_pcie.h b/arch/ppc/syslib/ppc440spe_pcie.h new file mode 100644 index 00000000000..55b765ad327 --- /dev/null +++ b/arch/ppc/syslib/ppc440spe_pcie.h @@ -0,0 +1,149 @@ +/* + * Copyright (c) 2005 Cisco Systems. All rights reserved. + * Roland Dreier <rolandd@cisco.com> + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + */ + +#ifndef __PPC_SYSLIB_PPC440SPE_PCIE_H +#define __PPC_SYSLIB_PPC440SPE_PCIE_H + +#define DCRN_SDR0_CFGADDR 0x00e +#define DCRN_SDR0_CFGDATA 0x00f + +#define DCRN_PCIE0_BASE 0x100 +#define DCRN_PCIE1_BASE 0x120 +#define DCRN_PCIE2_BASE 0x140 +#define PCIE0 DCRN_PCIE0_BASE +#define PCIE1 DCRN_PCIE1_BASE +#define PCIE2 DCRN_PCIE2_BASE + +#define DCRN_PEGPL_CFGBAH(base) (base + 0x00) +#define DCRN_PEGPL_CFGBAL(base) (base + 0x01) +#define DCRN_PEGPL_CFGMSK(base) (base + 0x02) +#define DCRN_PEGPL_MSGBAH(base) (base + 0x03) +#define DCRN_PEGPL_MSGBAL(base) (base + 0x04) +#define DCRN_PEGPL_MSGMSK(base) (base + 0x05) +#define DCRN_PEGPL_OMR1BAH(base) (base + 0x06) +#define DCRN_PEGPL_OMR1BAL(base) (base + 0x07) +#define DCRN_PEGPL_OMR1MSKH(base) (base + 0x08) +#define DCRN_PEGPL_OMR1MSKL(base) (base + 0x09) +#define DCRN_PEGPL_REGBAH(base) (base + 0x12) +#define DCRN_PEGPL_REGBAL(base) (base + 0x13) +#define DCRN_PEGPL_REGMSK(base) (base + 0x14) +#define DCRN_PEGPL_SPECIAL(base) (base + 0x15) + +/* + * System DCRs (SDRs) + */ +#define PESDR0_PLLLCT1 0x03a0 +#define PESDR0_PLLLCT2 0x03a1 +#define PESDR0_PLLLCT3 0x03a2 + +#define PESDR0_UTLSET1 0x0300 +#define PESDR0_UTLSET2 0x0301 +#define PESDR0_DLPSET 0x0302 +#define PESDR0_LOOP 0x0303 +#define PESDR0_RCSSET 0x0304 +#define PESDR0_RCSSTS 0x0305 +#define PESDR0_HSSL0SET1 0x0306 +#define PESDR0_HSSL0SET2 0x0307 +#define PESDR0_HSSL0STS 0x0308 +#define PESDR0_HSSL1SET1 0x0309 +#define PESDR0_HSSL1SET2 0x030a +#define PESDR0_HSSL1STS 0x030b +#define PESDR0_HSSL2SET1 0x030c +#define PESDR0_HSSL2SET2 0x030d +#define PESDR0_HSSL2STS 0x030e +#define PESDR0_HSSL3SET1 0x030f +#define PESDR0_HSSL3SET2 0x0310 +#define PESDR0_HSSL3STS 0x0311 +#define PESDR0_HSSL4SET1 0x0312 +#define PESDR0_HSSL4SET2 0x0313 +#define PESDR0_HSSL4STS 0x0314 +#define PESDR0_HSSL5SET1 0x0315 +#define PESDR0_HSSL5SET2 0x0316 +#define PESDR0_HSSL5STS 0x0317 +#define PESDR0_HSSL6SET1 0x0318 +#define PESDR0_HSSL6SET2 0x0319 +#define PESDR0_HSSL6STS 0x031a +#define PESDR0_HSSL7SET1 0x031b +#define PESDR0_HSSL7SET2 0x031c +#define PESDR0_HSSL7STS 0x031d +#define PESDR0_HSSCTLSET 0x031e +#define PESDR0_LANE_ABCD 0x031f +#define PESDR0_LANE_EFGH 0x0320 + +#define PESDR1_UTLSET1 0x0340 +#define PESDR1_UTLSET2 0x0341 +#define PESDR1_DLPSET 0x0342 +#define PESDR1_LOOP 0x0343 +#define PESDR1_RCSSET 0x0344 +#define PESDR1_RCSSTS 0x0345 +#define PESDR1_HSSL0SET1 0x0346 +#define PESDR1_HSSL0SET2 0x0347 +#define PESDR1_HSSL0STS 0x0348 +#define PESDR1_HSSL1SET1 0x0349 +#define PESDR1_HSSL1SET2 0x034a +#define PESDR1_HSSL1STS 0x034b +#define PESDR1_HSSL2SET1 0x034c +#define PESDR1_HSSL2SET2 0x034d +#define PESDR1_HSSL2STS 0x034e +#define PESDR1_HSSL3SET1 0x034f +#define PESDR1_HSSL3SET2 0x0350 +#define PESDR1_HSSL3STS 0x0351 +#define PESDR1_HSSCTLSET 0x0352 +#define PESDR1_LANE_ABCD 0x0353 + +#define PESDR2_UTLSET1 0x0370 +#define PESDR2_UTLSET2 0x0371 +#define PESDR2_DLPSET 0x0372 +#define PESDR2_LOOP 0x0373 +#define PESDR2_RCSSET 0x0374 +#define PESDR2_RCSSTS 0x0375 +#define PESDR2_HSSL0SET1 0x0376 +#define PESDR2_HSSL0SET2 0x0377 +#define PESDR2_HSSL0STS 0x0378 +#define PESDR2_HSSL1SET1 0x0379 +#define PESDR2_HSSL1SET2 0x037a +#define PESDR2_HSSL1STS 0x037b +#define PESDR2_HSSL2SET1 0x037c +#define PESDR2_HSSL2SET2 0x037d +#define PESDR2_HSSL2STS 0x037e +#define PESDR2_HSSL3SET1 0x037f +#define PESDR2_HSSL3SET2 0x0380 +#define PESDR2_HSSL3STS 0x0381 +#define PESDR2_HSSCTLSET 0x0382 +#define PESDR2_LANE_ABCD 0x0383 + +/* + * UTL register offsets + */ +#define PEUTL_PBBSZ 0x20 +#define PEUTL_OPDBSZ 0x68 +#define PEUTL_IPHBSZ 0x70 +#define PEUTL_IPDBSZ 0x78 +#define PEUTL_OUTTR 0x90 +#define PEUTL_INTR 0x98 +#define PEUTL_PCTL 0xa0 +#define PEUTL_RCIRQEN 0xb8 + +/* + * Config space register offsets + */ +#define PECFG_BAR0LMPA 0x210 +#define PECFG_BAR0HMPA 0x214 +#define PECFG_PIMEN 0x33c +#define PECFG_PIM0LAL 0x340 +#define PECFG_PIM0LAH 0x344 +#define PECFG_POM0LAL 0x380 +#define PECFG_POM0LAH 0x384 + +int ppc440spe_init_pcie(void); +int ppc440spe_init_pcie_rootport(int port); +void ppc440spe_setup_pcie(struct pci_controller *hose, int port); + +#endif /* __PPC_SYSLIB_PPC440SPE_PCIE_H */ diff --git a/arch/ppc/syslib/ppc4xx_pic.c b/arch/ppc/syslib/ppc4xx_pic.c index 0b435633a0d..aa4165144ec 100644 --- a/arch/ppc/syslib/ppc4xx_pic.c +++ b/arch/ppc/syslib/ppc4xx_pic.c @@ -38,6 +38,7 @@ extern unsigned char ppc4xx_uic_ext_irq_cfg[] __attribute__ ((weak)); #define IRQ_MASK_UICx(irq) (1 << (31 - ((irq) & 0x1f))) #define IRQ_MASK_UIC1(irq) IRQ_MASK_UICx(irq) #define IRQ_MASK_UIC2(irq) IRQ_MASK_UICx(irq) +#define IRQ_MASK_UIC3(irq) IRQ_MASK_UICx(irq) #define UIC_HANDLERS(n) \ static void ppc4xx_uic##n##_enable(unsigned int irq) \ @@ -88,7 +89,38 @@ static void ppc4xx_uic##n##_end(unsigned int irq) \ .end = ppc4xx_uic##n##_end, \ } \ -#if NR_UICS == 3 +#if NR_UICS == 4 +#define ACK_UIC0_PARENT +#define ACK_UIC1_PARENT mtdcr(DCRN_UIC_SR(UIC0), UIC0_UIC1NC); +#define ACK_UIC2_PARENT mtdcr(DCRN_UIC_SR(UIC0), UIC0_UIC2NC); +#define ACK_UIC3_PARENT mtdcr(DCRN_UIC_SR(UIC0), UIC0_UIC3NC); +UIC_HANDLERS(0); +UIC_HANDLERS(1); +UIC_HANDLERS(2); +UIC_HANDLERS(3); + +static int ppc4xx_pic_get_irq(struct pt_regs *regs) +{ + u32 uic0 = mfdcr(DCRN_UIC_MSR(UIC0)); + if (uic0 & UIC0_UIC1NC) + return 64 - ffs(mfdcr(DCRN_UIC_MSR(UIC1))); + else if (uic0 & UIC0_UIC2NC) + return 96 - ffs(mfdcr(DCRN_UIC_MSR(UIC2))); + else if (uic0 & UIC0_UIC3NC) + return 128 - ffs(mfdcr(DCRN_UIC_MSR(UIC3))); + else + return uic0 ? 32 - ffs(uic0) : -1; +} + +static void __init ppc4xx_pic_impl_init(void) +{ + /* Enable cascade interrupts in UIC0 */ + ppc_cached_irq_mask[0] |= UIC0_UIC1NC | UIC0_UIC2NC | UIC0_UIC3NC; + mtdcr(DCRN_UIC_SR(UIC0), UIC0_UIC1NC | UIC0_UIC2NC | UIC0_UIC3NC); + mtdcr(DCRN_UIC_ER(UIC0), ppc_cached_irq_mask[0]); +} + +#elif NR_UICS == 3 #define ACK_UIC0_PARENT mtdcr(DCRN_UIC_SR(UICB), UICB_UIC0NC); #define ACK_UIC1_PARENT mtdcr(DCRN_UIC_SR(UICB), UICB_UIC1NC); #define ACK_UIC2_PARENT mtdcr(DCRN_UIC_SR(UICB), UICB_UIC2NC); @@ -170,6 +202,9 @@ static struct ppc4xx_uic_impl { { .decl = DECLARE_UIC(1), .base = UIC1 }, #if NR_UICS > 2 { .decl = DECLARE_UIC(2), .base = UIC2 }, +#if NR_UICS > 3 + { .decl = DECLARE_UIC(3), .base = UIC3 }, +#endif #endif #endif }; diff --git a/arch/ppc/syslib/ppc85xx_rio.c b/arch/ppc/syslib/ppc85xx_rio.c new file mode 100644 index 00000000000..297f3b54917 --- /dev/null +++ b/arch/ppc/syslib/ppc85xx_rio.c @@ -0,0 +1,938 @@ +/* + * MPC85xx RapidIO support + * + * Copyright 2005 MontaVista Software, Inc. + * Matt Porter <mporter@kernel.crashing.org> + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + */ + +#include <linux/config.h> +#include <linux/init.h> +#include <linux/module.h> +#include <linux/types.h> +#include <linux/dma-mapping.h> +#include <linux/interrupt.h> +#include <linux/rio.h> +#include <linux/rio_drv.h> + +#include <asm/io.h> + +#define RIO_REGS_BASE (CCSRBAR + 0xc0000) +#define RIO_ATMU_REGS_OFFSET 0x10c00 +#define RIO_MSG_REGS_OFFSET 0x11000 +#define RIO_MAINT_WIN_SIZE 0x400000 +#define RIO_DBELL_WIN_SIZE 0x1000 + +#define RIO_MSG_OMR_MUI 0x00000002 +#define RIO_MSG_OSR_TE 0x00000080 +#define RIO_MSG_OSR_QOI 0x00000020 +#define RIO_MSG_OSR_QFI 0x00000010 +#define RIO_MSG_OSR_MUB 0x00000004 +#define RIO_MSG_OSR_EOMI 0x00000002 +#define RIO_MSG_OSR_QEI 0x00000001 + +#define RIO_MSG_IMR_MI 0x00000002 +#define RIO_MSG_ISR_TE 0x00000080 +#define RIO_MSG_ISR_QFI 0x00000010 +#define RIO_MSG_ISR_DIQI 0x00000001 + +#define RIO_MSG_DESC_SIZE 32 +#define RIO_MSG_BUFFER_SIZE 4096 +#define RIO_MIN_TX_RING_SIZE 2 +#define RIO_MAX_TX_RING_SIZE 2048 +#define RIO_MIN_RX_RING_SIZE 2 +#define RIO_MAX_RX_RING_SIZE 2048 + +#define DOORBELL_DMR_DI 0x00000002 +#define DOORBELL_DSR_TE 0x00000080 +#define DOORBELL_DSR_QFI 0x00000010 +#define DOORBELL_DSR_DIQI 0x00000001 +#define DOORBELL_TID_OFFSET 0x03 +#define DOORBELL_SID_OFFSET 0x05 +#define DOORBELL_INFO_OFFSET 0x06 + +#define DOORBELL_MESSAGE_SIZE 0x08 +#define DBELL_SID(x) (*(u8 *)(x + DOORBELL_SID_OFFSET)) +#define DBELL_TID(x) (*(u8 *)(x + DOORBELL_TID_OFFSET)) +#define DBELL_INF(x) (*(u16 *)(x + DOORBELL_INFO_OFFSET)) + +#define is_power_of_2(x) (((x) & ((x) - 1)) == 0) + +struct rio_atmu_regs { + u32 rowtar; + u32 pad1; + u32 rowbar; + u32 pad2; + u32 rowar; + u32 pad3[3]; +}; + +struct rio_msg_regs { + u32 omr; + u32 osr; + u32 pad1; + u32 odqdpar; + u32 pad2; + u32 osar; + u32 odpr; + u32 odatr; + u32 odcr; + u32 pad3; + u32 odqepar; + u32 pad4[13]; + u32 imr; + u32 isr; + u32 pad5; + u32 ifqdpar; + u32 pad6; + u32 ifqepar; + u32 pad7[250]; + u32 dmr; + u32 dsr; + u32 pad8; + u32 dqdpar; + u32 pad9; + u32 dqepar; + u32 pad10[26]; + u32 pwmr; + u32 pwsr; + u32 pad11; + u32 pwqbar; +}; + +struct rio_tx_desc { + u32 res1; + u32 saddr; + u32 dport; + u32 dattr; + u32 res2; + u32 res3; + u32 dwcnt; + u32 res4; +}; + +static u32 regs_win; +static struct rio_atmu_regs *atmu_regs; +static struct rio_atmu_regs *maint_atmu_regs; +static struct rio_atmu_regs *dbell_atmu_regs; +static u32 dbell_win; +static u32 maint_win; +static struct rio_msg_regs *msg_regs; + +static struct rio_dbell_ring { + void *virt; + dma_addr_t phys; +} dbell_ring; + +static struct rio_msg_tx_ring { + void *virt; + dma_addr_t phys; + void *virt_buffer[RIO_MAX_TX_RING_SIZE]; + dma_addr_t phys_buffer[RIO_MAX_TX_RING_SIZE]; + int tx_slot; + int size; + void *dev_id; +} msg_tx_ring; + +static struct rio_msg_rx_ring { + void *virt; + dma_addr_t phys; + void *virt_buffer[RIO_MAX_RX_RING_SIZE]; + int rx_slot; + int size; + void *dev_id; +} msg_rx_ring; + +/** + * mpc85xx_rio_doorbell_send - Send a MPC85xx doorbell message + * @index: ID of RapidIO interface + * @destid: Destination ID of target device + * @data: 16-bit info field of RapidIO doorbell message + * + * Sends a MPC85xx doorbell message. Returns %0 on success or + * %-EINVAL on failure. + */ +static int mpc85xx_rio_doorbell_send(int index, u16 destid, u16 data) +{ + pr_debug("mpc85xx_doorbell_send: index %d destid %4.4x data %4.4x\n", + index, destid, data); + out_be32((void *)&dbell_atmu_regs->rowtar, destid << 22); + out_be16((void *)(dbell_win), data); + + return 0; +} + +/** + * mpc85xx_local_config_read - Generate a MPC85xx local config space read + * @index: ID of RapdiIO interface + * @offset: Offset into configuration space + * @len: Length (in bytes) of the maintenance transaction + * @data: Value to be read into + * + * Generates a MPC85xx local configuration space read. Returns %0 on + * success or %-EINVAL on failure. + */ +static int mpc85xx_local_config_read(int index, u32 offset, int len, u32 * data) +{ + pr_debug("mpc85xx_local_config_read: index %d offset %8.8x\n", index, + offset); + *data = in_be32((void *)(regs_win + offset)); + + return 0; +} + +/** + * mpc85xx_local_config_write - Generate a MPC85xx local config space write + * @index: ID of RapdiIO interface + * @offset: Offset into configuration space + * @len: Length (in bytes) of the maintenance transaction + * @data: Value to be written + * + * Generates a MPC85xx local configuration space write. Returns %0 on + * success or %-EINVAL on failure. + */ +static int mpc85xx_local_config_write(int index, u32 offset, int len, u32 data) +{ + pr_debug + ("mpc85xx_local_config_write: index %d offset %8.8x data %8.8x\n", + index, offset, data); + out_be32((void *)(regs_win + offset), data); + + return 0; +} + +/** + * mpc85xx_rio_config_read - Generate a MPC85xx read maintenance transaction + * @index: ID of RapdiIO interface + * @destid: Destination ID of transaction + * @hopcount: Number of hops to target device + * @offset: Offset into configuration space + * @len: Length (in bytes) of the maintenance transaction + * @val: Location to be read into + * + * Generates a MPC85xx read maintenance transaction. Returns %0 on + * success or %-EINVAL on failure. + */ +static int +mpc85xx_rio_config_read(int index, u16 destid, u8 hopcount, u32 offset, int len, + u32 * val) +{ + u8 *data; + + pr_debug + ("mpc85xx_rio_config_read: index %d destid %d hopcount %d offset %8.8x len %d\n", + index, destid, hopcount, offset, len); + out_be32((void *)&maint_atmu_regs->rowtar, + (destid << 22) | (hopcount << 12) | ((offset & ~0x3) >> 9)); + + data = (u8 *) maint_win + offset; + switch (len) { + case 1: + *val = in_8((u8 *) data); + break; + case 2: + *val = in_be16((u16 *) data); + break; + default: + *val = in_be32((u32 *) data); + break; + } + + return 0; +} + +/** + * mpc85xx_rio_config_write - Generate a MPC85xx write maintenance transaction + * @index: ID of RapdiIO interface + * @destid: Destination ID of transaction + * @hopcount: Number of hops to target device + * @offset: Offset into configuration space + * @len: Length (in bytes) of the maintenance transaction + * @val: Value to be written + * + * Generates an MPC85xx write maintenance transaction. Returns %0 on + * success or %-EINVAL on failure. + */ +static int +mpc85xx_rio_config_write(int index, u16 destid, u8 hopcount, u32 offset, + int len, u32 val) +{ + u8 *data; + pr_debug + ("mpc85xx_rio_config_write: index %d destid %d hopcount %d offset %8.8x len %d val %8.8x\n", + index, destid, hopcount, offset, len, val); + out_be32((void *)&maint_atmu_regs->rowtar, + (destid << 22) | (hopcount << 12) | ((offset & ~0x3) >> 9)); + + data = (u8 *) maint_win + offset; + switch (len) { + case 1: + out_8((u8 *) data, val); + break; + case 2: + out_be16((u16 *) data, val); + break; + default: + out_be32((u32 *) data, val); + break; + } + + return 0; +} + +/** + * rio_hw_add_outb_message - Add message to the MPC85xx outbound message queue + * @mport: Master port with outbound message queue + * @rdev: Target of outbound message + * @mbox: Outbound mailbox + * @buffer: Message to add to outbound queue + * @len: Length of message + * + * Adds the @buffer message to the MPC85xx outbound message queue. Returns + * %0 on success or %-EINVAL on failure. + */ +int +rio_hw_add_outb_message(struct rio_mport *mport, struct rio_dev *rdev, int mbox, + void *buffer, size_t len) +{ + u32 omr; + struct rio_tx_desc *desc = + (struct rio_tx_desc *)msg_tx_ring.virt + msg_tx_ring.tx_slot; + int ret = 0; + + pr_debug + ("RIO: rio_hw_add_outb_message(): destid %4.4x mbox %d buffer %8.8x len %8.8x\n", + rdev->destid, mbox, (int)buffer, len); + + if ((len < 8) || (len > RIO_MAX_MSG_SIZE)) { + ret = -EINVAL; + goto out; + } + + /* Copy and clear rest of buffer */ + memcpy(msg_tx_ring.virt_buffer[msg_tx_ring.tx_slot], buffer, len); + if (len < (RIO_MAX_MSG_SIZE - 4)) + memset((void *)((u32) msg_tx_ring. + virt_buffer[msg_tx_ring.tx_slot] + len), 0, + RIO_MAX_MSG_SIZE - len); + + /* Set mbox field for message */ + desc->dport = mbox & 0x3; + + /* Enable EOMI interrupt, set priority, and set destid */ + desc->dattr = 0x28000000 | (rdev->destid << 2); + + /* Set transfer size aligned to next power of 2 (in double words) */ + desc->dwcnt = is_power_of_2(len) ? len : 1 << get_bitmask_order(len); + + /* Set snooping and source buffer address */ + desc->saddr = 0x00000004 | msg_tx_ring.phys_buffer[msg_tx_ring.tx_slot]; + + /* Increment enqueue pointer */ + omr = in_be32((void *)&msg_regs->omr); + out_be32((void *)&msg_regs->omr, omr | RIO_MSG_OMR_MUI); + + /* Go to next descriptor */ + if (++msg_tx_ring.tx_slot == msg_tx_ring.size) + msg_tx_ring.tx_slot = 0; + + out: + return ret; +} + +EXPORT_SYMBOL_GPL(rio_hw_add_outb_message); + +/** + * mpc85xx_rio_tx_handler - MPC85xx outbound message interrupt handler + * @irq: Linux interrupt number + * @dev_instance: Pointer to interrupt-specific data + * @regs: Register context + * + * Handles outbound message interrupts. Executes a register outbound + * mailbox event handler and acks the interrupt occurence. + */ +static irqreturn_t +mpc85xx_rio_tx_handler(int irq, void *dev_instance, struct pt_regs *regs) +{ + int osr; + struct rio_mport *port = (struct rio_mport *)dev_instance; + + osr = in_be32((void *)&msg_regs->osr); + + if (osr & RIO_MSG_OSR_TE) { + pr_info("RIO: outbound message transmission error\n"); + out_be32((void *)&msg_regs->osr, RIO_MSG_OSR_TE); + goto out; + } + + if (osr & RIO_MSG_OSR_QOI) { + pr_info("RIO: outbound message queue overflow\n"); + out_be32((void *)&msg_regs->osr, RIO_MSG_OSR_QOI); + goto out; + } + + if (osr & RIO_MSG_OSR_EOMI) { + u32 dqp = in_be32((void *)&msg_regs->odqdpar); + int slot = (dqp - msg_tx_ring.phys) >> 5; + port->outb_msg[0].mcback(port, msg_tx_ring.dev_id, -1, slot); + + /* Ack the end-of-message interrupt */ + out_be32((void *)&msg_regs->osr, RIO_MSG_OSR_EOMI); + } + + out: + return IRQ_HANDLED; +} + +/** + * rio_open_outb_mbox - Initialize MPC85xx outbound mailbox + * @mport: Master port implementing the outbound message unit + * @dev_id: Device specific pointer to pass on event + * @mbox: Mailbox to open + * @entries: Number of entries in the outbound mailbox ring + * + * Initializes buffer ring, request the outbound message interrupt, + * and enables the outbound message unit. Returns %0 on success and + * %-EINVAL or %-ENOMEM on failure. + */ +int rio_open_outb_mbox(struct rio_mport *mport, void *dev_id, int mbox, int entries) +{ + int i, j, rc = 0; + + if ((entries < RIO_MIN_TX_RING_SIZE) || + (entries > RIO_MAX_TX_RING_SIZE) || (!is_power_of_2(entries))) { + rc = -EINVAL; + goto out; + } + + /* Initialize shadow copy ring */ + msg_tx_ring.dev_id = dev_id; + msg_tx_ring.size = entries; + + for (i = 0; i < msg_tx_ring.size; i++) { + if (! + (msg_tx_ring.virt_buffer[i] = + dma_alloc_coherent(NULL, RIO_MSG_BUFFER_SIZE, + &msg_tx_ring.phys_buffer[i], + GFP_KERNEL))) { + rc = -ENOMEM; + for (j = 0; j < msg_tx_ring.size; j++) + if (msg_tx_ring.virt_buffer[j]) + dma_free_coherent(NULL, + RIO_MSG_BUFFER_SIZE, + msg_tx_ring. + virt_buffer[j], + msg_tx_ring. + phys_buffer[j]); + goto out; + } + } + + /* Initialize outbound message descriptor ring */ + if (!(msg_tx_ring.virt = dma_alloc_coherent(NULL, + msg_tx_ring.size * + RIO_MSG_DESC_SIZE, + &msg_tx_ring.phys, + GFP_KERNEL))) { + rc = -ENOMEM; + goto out_dma; + } + memset(msg_tx_ring.virt, 0, msg_tx_ring.size * RIO_MSG_DESC_SIZE); + msg_tx_ring.tx_slot = 0; + + /* Point dequeue/enqueue pointers at first entry in ring */ + out_be32((void *)&msg_regs->odqdpar, msg_tx_ring.phys); + out_be32((void *)&msg_regs->odqepar, msg_tx_ring.phys); + + /* Configure for snooping */ + out_be32((void *)&msg_regs->osar, 0x00000004); + + /* Clear interrupt status */ + out_be32((void *)&msg_regs->osr, 0x000000b3); + + /* Hook up outbound message handler */ + if ((rc = + request_irq(MPC85xx_IRQ_RIO_TX, mpc85xx_rio_tx_handler, 0, + "msg_tx", (void *)mport)) < 0) + goto out_irq; + + /* + * Configure outbound message unit + * Snooping + * Interrupts (all enabled, except QEIE) + * Chaining mode + * Disable + */ + out_be32((void *)&msg_regs->omr, 0x00100220); + + /* Set number of entries */ + out_be32((void *)&msg_regs->omr, + in_be32((void *)&msg_regs->omr) | + ((get_bitmask_order(entries) - 2) << 12)); + + /* Now enable the unit */ + out_be32((void *)&msg_regs->omr, in_be32((void *)&msg_regs->omr) | 0x1); + + out: + return rc; + + out_irq: + dma_free_coherent(NULL, msg_tx_ring.size * RIO_MSG_DESC_SIZE, + msg_tx_ring.virt, msg_tx_ring.phys); + + out_dma: + for (i = 0; i < msg_tx_ring.size; i++) + dma_free_coherent(NULL, RIO_MSG_BUFFER_SIZE, + msg_tx_ring.virt_buffer[i], + msg_tx_ring.phys_buffer[i]); + + return rc; +} + +/** + * rio_close_outb_mbox - Shut down MPC85xx outbound mailbox + * @mport: Master port implementing the outbound message unit + * @mbox: Mailbox to close + * + * Disables the outbound message unit, free all buffers, and + * frees the outbound message interrupt. + */ +void rio_close_outb_mbox(struct rio_mport *mport, int mbox) +{ + /* Disable inbound message unit */ + out_be32((void *)&msg_regs->omr, 0); + + /* Free ring */ + dma_free_coherent(NULL, msg_tx_ring.size * RIO_MSG_DESC_SIZE, + msg_tx_ring.virt, msg_tx_ring.phys); + + /* Free interrupt */ + free_irq(MPC85xx_IRQ_RIO_TX, (void *)mport); +} + +/** + * mpc85xx_rio_rx_handler - MPC85xx inbound message interrupt handler + * @irq: Linux interrupt number + * @dev_instance: Pointer to interrupt-specific data + * @regs: Register context + * + * Handles inbound message interrupts. Executes a registered inbound + * mailbox event handler and acks the interrupt occurence. + */ +static irqreturn_t +mpc85xx_rio_rx_handler(int irq, void *dev_instance, struct pt_regs *regs) +{ + int isr; + struct rio_mport *port = (struct rio_mport *)dev_instance; + + isr = in_be32((void *)&msg_regs->isr); + + if (isr & RIO_MSG_ISR_TE) { + pr_info("RIO: inbound message reception error\n"); + out_be32((void *)&msg_regs->isr, RIO_MSG_ISR_TE); + goto out; + } + + /* XXX Need to check/dispatch until queue empty */ + if (isr & RIO_MSG_ISR_DIQI) { + /* + * We implement *only* mailbox 0, but can receive messages + * for any mailbox/letter to that mailbox destination. So, + * make the callback with an unknown/invalid mailbox number + * argument. + */ + port->inb_msg[0].mcback(port, msg_rx_ring.dev_id, -1, -1); + + /* Ack the queueing interrupt */ + out_be32((void *)&msg_regs->isr, RIO_MSG_ISR_DIQI); + } + + out: + return IRQ_HANDLED; +} + +/** + * rio_open_inb_mbox - Initialize MPC85xx inbound mailbox + * @mport: Master port implementing the inbound message unit + * @dev_id: Device specific pointer to pass on event + * @mbox: Mailbox to open + * @entries: Number of entries in the inbound mailbox ring + * + * Initializes buffer ring, request the inbound message interrupt, + * and enables the inbound message unit. Returns %0 on success + * and %-EINVAL or %-ENOMEM on failure. + */ +int rio_open_inb_mbox(struct rio_mport *mport, void *dev_id, int mbox, int entries) +{ + int i, rc = 0; + + if ((entries < RIO_MIN_RX_RING_SIZE) || + (entries > RIO_MAX_RX_RING_SIZE) || (!is_power_of_2(entries))) { + rc = -EINVAL; + goto out; + } + + /* Initialize client buffer ring */ + msg_rx_ring.dev_id = dev_id; + msg_rx_ring.size = entries; + msg_rx_ring.rx_slot = 0; + for (i = 0; i < msg_rx_ring.size; i++) + msg_rx_ring.virt_buffer[i] = NULL; + + /* Initialize inbound message ring */ + if (!(msg_rx_ring.virt = dma_alloc_coherent(NULL, + msg_rx_ring.size * + RIO_MAX_MSG_SIZE, + &msg_rx_ring.phys, + GFP_KERNEL))) { + rc = -ENOMEM; + goto out; + } + + /* Point dequeue/enqueue pointers at first entry in ring */ + out_be32((void *)&msg_regs->ifqdpar, (u32) msg_rx_ring.phys); + out_be32((void *)&msg_regs->ifqepar, (u32) msg_rx_ring.phys); + + /* Clear interrupt status */ + out_be32((void *)&msg_regs->isr, 0x00000091); + + /* Hook up inbound message handler */ + if ((rc = + request_irq(MPC85xx_IRQ_RIO_RX, mpc85xx_rio_rx_handler, 0, + "msg_rx", (void *)mport)) < 0) { + dma_free_coherent(NULL, RIO_MSG_BUFFER_SIZE, + msg_tx_ring.virt_buffer[i], + msg_tx_ring.phys_buffer[i]); + goto out; + } + + /* + * Configure inbound message unit: + * Snooping + * 4KB max message size + * Unmask all interrupt sources + * Disable + */ + out_be32((void *)&msg_regs->imr, 0x001b0060); + + /* Set number of queue entries */ + out_be32((void *)&msg_regs->imr, + in_be32((void *)&msg_regs->imr) | + ((get_bitmask_order(entries) - 2) << 12)); + + /* Now enable the unit */ + out_be32((void *)&msg_regs->imr, in_be32((void *)&msg_regs->imr) | 0x1); + + out: + return rc; +} + +/** + * rio_close_inb_mbox - Shut down MPC85xx inbound mailbox + * @mport: Master port implementing the inbound message unit + * @mbox: Mailbox to close + * + * Disables the inbound message unit, free all buffers, and + * frees the inbound message interrupt. + */ +void rio_close_inb_mbox(struct rio_mport *mport, int mbox) +{ + /* Disable inbound message unit */ + out_be32((void *)&msg_regs->imr, 0); + + /* Free ring */ + dma_free_coherent(NULL, msg_rx_ring.size * RIO_MAX_MSG_SIZE, + msg_rx_ring.virt, msg_rx_ring.phys); + + /* Free interrupt */ + free_irq(MPC85xx_IRQ_RIO_RX, (void *)mport); +} + +/** + * rio_hw_add_inb_buffer - Add buffer to the MPC85xx inbound message queue + * @mport: Master port implementing the inbound message unit + * @mbox: Inbound mailbox number + * @buf: Buffer to add to inbound queue + * + * Adds the @buf buffer to the MPC85xx inbound message queue. Returns + * %0 on success or %-EINVAL on failure. + */ +int rio_hw_add_inb_buffer(struct rio_mport *mport, int mbox, void *buf) +{ + int rc = 0; + + pr_debug("RIO: rio_hw_add_inb_buffer(), msg_rx_ring.rx_slot %d\n", + msg_rx_ring.rx_slot); + + if (msg_rx_ring.virt_buffer[msg_rx_ring.rx_slot]) { + printk(KERN_ERR + "RIO: error adding inbound buffer %d, buffer exists\n", + msg_rx_ring.rx_slot); + rc = -EINVAL; + goto out; + } + + msg_rx_ring.virt_buffer[msg_rx_ring.rx_slot] = buf; + if (++msg_rx_ring.rx_slot == msg_rx_ring.size) + msg_rx_ring.rx_slot = 0; + + out: + return rc; +} + +EXPORT_SYMBOL_GPL(rio_hw_add_inb_buffer); + +/** + * rio_hw_get_inb_message - Fetch inbound message from the MPC85xx message unit + * @mport: Master port implementing the inbound message unit + * @mbox: Inbound mailbox number + * + * Gets the next available inbound message from the inbound message queue. + * A pointer to the message is returned on success or NULL on failure. + */ +void *rio_hw_get_inb_message(struct rio_mport *mport, int mbox) +{ + u32 imr; + u32 phys_buf, virt_buf; + void *buf = NULL; + int buf_idx; + + phys_buf = in_be32((void *)&msg_regs->ifqdpar); + + /* If no more messages, then bail out */ + if (phys_buf == in_be32((void *)&msg_regs->ifqepar)) + goto out2; + + virt_buf = (u32) msg_rx_ring.virt + (phys_buf - msg_rx_ring.phys); + buf_idx = (phys_buf - msg_rx_ring.phys) / RIO_MAX_MSG_SIZE; + buf = msg_rx_ring.virt_buffer[buf_idx]; + + if (!buf) { + printk(KERN_ERR + "RIO: inbound message copy failed, no buffers\n"); + goto out1; + } + + /* Copy max message size, caller is expected to allocate that big */ + memcpy(buf, (void *)virt_buf, RIO_MAX_MSG_SIZE); + + /* Clear the available buffer */ + msg_rx_ring.virt_buffer[buf_idx] = NULL; + + out1: + imr = in_be32((void *)&msg_regs->imr); + out_be32((void *)&msg_regs->imr, imr | RIO_MSG_IMR_MI); + + out2: + return buf; +} + +EXPORT_SYMBOL_GPL(rio_hw_get_inb_message); + +/** + * mpc85xx_rio_dbell_handler - MPC85xx doorbell interrupt handler + * @irq: Linux interrupt number + * @dev_instance: Pointer to interrupt-specific data + * @regs: Register context + * + * Handles doorbell interrupts. Parses a list of registered + * doorbell event handlers and executes a matching event handler. + */ +static irqreturn_t +mpc85xx_rio_dbell_handler(int irq, void *dev_instance, struct pt_regs *regs) +{ + int dsr; + struct rio_mport *port = (struct rio_mport *)dev_instance; + + dsr = in_be32((void *)&msg_regs->dsr); + + if (dsr & DOORBELL_DSR_TE) { + pr_info("RIO: doorbell reception error\n"); + out_be32((void *)&msg_regs->dsr, DOORBELL_DSR_TE); + goto out; + } + + if (dsr & DOORBELL_DSR_QFI) { + pr_info("RIO: doorbell queue full\n"); + out_be32((void *)&msg_regs->dsr, DOORBELL_DSR_QFI); + goto out; + } + + /* XXX Need to check/dispatch until queue empty */ + if (dsr & DOORBELL_DSR_DIQI) { + u32 dmsg = + (u32) dbell_ring.virt + + (in_be32((void *)&msg_regs->dqdpar) & 0xfff); + u32 dmr; + struct rio_dbell *dbell; + int found = 0; + + pr_debug + ("RIO: processing doorbell, sid %2.2x tid %2.2x info %4.4x\n", + DBELL_SID(dmsg), DBELL_TID(dmsg), DBELL_INF(dmsg)); + + list_for_each_entry(dbell, &port->dbells, node) { + if ((dbell->res->start <= DBELL_INF(dmsg)) && + (dbell->res->end >= DBELL_INF(dmsg))) { + found = 1; + break; + } + } + if (found) { + dbell->dinb(port, dbell->dev_id, DBELL_SID(dmsg), DBELL_TID(dmsg), + DBELL_INF(dmsg)); + } else { + pr_debug + ("RIO: spurious doorbell, sid %2.2x tid %2.2x info %4.4x\n", + DBELL_SID(dmsg), DBELL_TID(dmsg), DBELL_INF(dmsg)); + } + dmr = in_be32((void *)&msg_regs->dmr); + out_be32((void *)&msg_regs->dmr, dmr | DOORBELL_DMR_DI); + out_be32((void *)&msg_regs->dsr, DOORBELL_DSR_DIQI); + } + + out: + return IRQ_HANDLED; +} + +/** + * mpc85xx_rio_doorbell_init - MPC85xx doorbell interface init + * @mport: Master port implementing the inbound doorbell unit + * + * Initializes doorbell unit hardware and inbound DMA buffer + * ring. Called from mpc85xx_rio_setup(). Returns %0 on success + * or %-ENOMEM on failure. + */ +static int mpc85xx_rio_doorbell_init(struct rio_mport *mport) +{ + int rc = 0; + + /* Map outbound doorbell window immediately after maintenance window */ + if (!(dbell_win = + (u32) ioremap(mport->iores.start + RIO_MAINT_WIN_SIZE, + RIO_DBELL_WIN_SIZE))) { + printk(KERN_ERR + "RIO: unable to map outbound doorbell window\n"); + rc = -ENOMEM; + goto out; + } + + /* Initialize inbound doorbells */ + if (!(dbell_ring.virt = dma_alloc_coherent(NULL, + 512 * DOORBELL_MESSAGE_SIZE, + &dbell_ring.phys, + GFP_KERNEL))) { + printk(KERN_ERR "RIO: unable allocate inbound doorbell ring\n"); + rc = -ENOMEM; + iounmap((void *)dbell_win); + goto out; + } + + /* Point dequeue/enqueue pointers at first entry in ring */ + out_be32((void *)&msg_regs->dqdpar, (u32) dbell_ring.phys); + out_be32((void *)&msg_regs->dqepar, (u32) dbell_ring.phys); + + /* Clear interrupt status */ + out_be32((void *)&msg_regs->dsr, 0x00000091); + + /* Hook up doorbell handler */ + if ((rc = + request_irq(MPC85xx_IRQ_RIO_BELL, mpc85xx_rio_dbell_handler, 0, + "dbell_rx", (void *)mport) < 0)) { + iounmap((void *)dbell_win); + dma_free_coherent(NULL, 512 * DOORBELL_MESSAGE_SIZE, + dbell_ring.virt, dbell_ring.phys); + printk(KERN_ERR + "MPC85xx RIO: unable to request inbound doorbell irq"); + goto out; + } + + /* Configure doorbells for snooping, 512 entries, and enable */ + out_be32((void *)&msg_regs->dmr, 0x00108161); + + out: + return rc; +} + +static char *cmdline = NULL; + +static int mpc85xx_rio_get_hdid(int index) +{ + /* XXX Need to parse multiple entries in some format */ + if (!cmdline) + return -1; + + return simple_strtol(cmdline, NULL, 0); +} + +static int mpc85xx_rio_get_cmdline(char *s) +{ + if (!s) + return 0; + + cmdline = s; + return 1; +} + +__setup("riohdid=", mpc85xx_rio_get_cmdline); + +/** + * mpc85xx_rio_setup - Setup MPC85xx RapidIO interface + * @law_start: Starting physical address of RapidIO LAW + * @law_size: Size of RapidIO LAW + * + * Initializes MPC85xx RapidIO hardware interface, configures + * master port with system-specific info, and registers the + * master port with the RapidIO subsystem. + */ +void mpc85xx_rio_setup(int law_start, int law_size) +{ + struct rio_ops *ops; + struct rio_mport *port; + + ops = kmalloc(sizeof(struct rio_ops), GFP_KERNEL); + ops->lcread = mpc85xx_local_config_read; + ops->lcwrite = mpc85xx_local_config_write; + ops->cread = mpc85xx_rio_config_read; + ops->cwrite = mpc85xx_rio_config_write; + ops->dsend = mpc85xx_rio_doorbell_send; + + port = kmalloc(sizeof(struct rio_mport), GFP_KERNEL); + port->id = 0; + port->index = 0; + INIT_LIST_HEAD(&port->dbells); + port->iores.start = law_start; + port->iores.end = law_start + law_size; + port->iores.flags = IORESOURCE_MEM; + + rio_init_dbell_res(&port->riores[RIO_DOORBELL_RESOURCE], 0, 0xffff); + rio_init_mbox_res(&port->riores[RIO_INB_MBOX_RESOURCE], 0, 0); + rio_init_mbox_res(&port->riores[RIO_OUTB_MBOX_RESOURCE], 0, 0); + strcpy(port->name, "RIO0 mport"); + + port->ops = ops; + port->host_deviceid = mpc85xx_rio_get_hdid(port->id); + + rio_register_mport(port); + + regs_win = (u32) ioremap(RIO_REGS_BASE, 0x20000); + atmu_regs = (struct rio_atmu_regs *)(regs_win + RIO_ATMU_REGS_OFFSET); + maint_atmu_regs = atmu_regs + 1; + dbell_atmu_regs = atmu_regs + 2; + msg_regs = (struct rio_msg_regs *)(regs_win + RIO_MSG_REGS_OFFSET); + + /* Configure maintenance transaction window */ + out_be32((void *)&maint_atmu_regs->rowbar, 0x000c0000); + out_be32((void *)&maint_atmu_regs->rowar, 0x80077015); + + maint_win = (u32) ioremap(law_start, RIO_MAINT_WIN_SIZE); + + /* Configure outbound doorbell window */ + out_be32((void *)&dbell_atmu_regs->rowbar, 0x000c0400); + out_be32((void *)&dbell_atmu_regs->rowar, 0x8004200b); + mpc85xx_rio_doorbell_init(port); +} diff --git a/arch/ppc/syslib/ppc85xx_rio.h b/arch/ppc/syslib/ppc85xx_rio.h new file mode 100644 index 00000000000..c0827a2c3ee --- /dev/null +++ b/arch/ppc/syslib/ppc85xx_rio.h @@ -0,0 +1,21 @@ +/* + * MPC85xx RapidIO definitions + * + * Copyright 2005 MontaVista Software, Inc. + * Matt Porter <mporter@kernel.crashing.org> + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + */ + +#ifndef __PPC_SYSLIB_PPC85XX_RIO_H +#define __PPC_SYSLIB_PPC85XX_RIO_H + +#include <linux/config.h> +#include <linux/init.h> + +extern void mpc85xx_rio_setup(int law_start, int law_size); + +#endif /* __PPC_SYSLIB_PPC85XX_RIO_H */ diff --git a/arch/ppc/syslib/ppc_sys.c b/arch/ppc/syslib/ppc_sys.c index 62ee86e8071..603f0119081 100644 --- a/arch/ppc/syslib/ppc_sys.c +++ b/arch/ppc/syslib/ppc_sys.c @@ -14,6 +14,7 @@ * option) any later version. */ +#include <linux/string.h> #include <asm/ppc_sys.h> int (*ppc_sys_device_fixup) (struct platform_device * pdev); diff --git a/arch/ppc/syslib/prom.c b/arch/ppc/syslib/prom.c index 278da6ee62e..03b1fc9b950 100644 --- a/arch/ppc/syslib/prom.c +++ b/arch/ppc/syslib/prom.c @@ -1165,7 +1165,7 @@ get_property(struct device_node *np, const char *name, int *lenp) /* * Add a property to a node */ -void +int prom_add_property(struct device_node* np, struct property* prop) { struct property **next = &np->properties; @@ -1174,6 +1174,8 @@ prom_add_property(struct device_node* np, struct property* prop) while (*next) next = &(*next)->next; *next = prop; + + return 0; } /* I quickly hacked that one, check against spec ! */ @@ -1335,10 +1337,8 @@ release_OF_resource(struct device_node* node, int index) if (!res) return -ENODEV; - if (res->name) { - kfree(res->name); - res->name = NULL; - } + kfree(res->name); + res->name = NULL; release_resource(res); kfree(res); diff --git a/arch/ppc/xmon/xmon.c b/arch/ppc/xmon/xmon.c index 66bfaa3211a..2b483b4f160 100644 --- a/arch/ppc/xmon/xmon.c +++ b/arch/ppc/xmon/xmon.c @@ -220,8 +220,7 @@ static void get_tb(unsigned *p) p[1] = lo; } -void -xmon(struct pt_regs *excp) +int xmon(struct pt_regs *excp) { struct pt_regs regs; int msr, cmd; @@ -290,6 +289,8 @@ xmon(struct pt_regs *excp) #endif /* CONFIG_SMP */ set_msr(msr); /* restore interrupt enable */ get_tb(start_tb[smp_processor_id()]); + + return cmd != 'X'; } irqreturn_t diff --git a/arch/ppc64/Kconfig b/arch/ppc64/Kconfig index 2130cc31595..29552348e58 100644 --- a/arch/ppc64/Kconfig +++ b/arch/ppc64/Kconfig @@ -56,6 +56,7 @@ config PPC_STD_MMU # max order + 1 config FORCE_MAX_ZONEORDER int + default "9" if PPC_64K_PAGES default "13" source "init/Kconfig" @@ -173,6 +174,16 @@ config KEXEC support. As of this writing the exact hardware interface is strongly in flux, so no good recommendation can be made. +source "drivers/cpufreq/Kconfig" + +config CPU_FREQ_PMAC64 + bool "Support for some Apple G5s" + depends on CPU_FREQ && PMAC_SMU && PPC64 + select CPU_FREQ_TABLE + help + This adds support for frequency switching on Apple iMac G5, + and some of the more recent desktop G5 machines as well. + config IBMVIO depends on PPC_PSERIES || PPC_ISERIES bool diff --git a/arch/ppc64/Kconfig.debug b/arch/ppc64/Kconfig.debug index f16a5030527..b258c9314a1 100644 --- a/arch/ppc64/Kconfig.debug +++ b/arch/ppc64/Kconfig.debug @@ -55,10 +55,6 @@ config XMON_DEFAULT xmon is normally disabled unless booted with 'xmon=on'. Use 'xmon=off' to disable xmon init during runtime. -config PPCDBG - bool "Include PPCDBG realtime debugging" - depends on DEBUG_KERNEL - config IRQSTACKS bool "Use separate kernel stacks when processing interrupts" help diff --git a/arch/ppc64/boot/main.c b/arch/ppc64/boot/main.c index c1dc876bcca..e0dde24a72c 100644 --- a/arch/ppc64/boot/main.c +++ b/arch/ppc64/boot/main.c @@ -203,8 +203,15 @@ void start(unsigned long a1, unsigned long a2, void *promptr, void *sp) if (elf64ph->p_type == PT_LOAD && elf64ph->p_offset != 0) break; } - vmlinux.size = (unsigned long)elf64ph->p_filesz; - vmlinux.memsize = (unsigned long)elf64ph->p_memsz; + vmlinux.size = (unsigned long)elf64ph->p_filesz + + (unsigned long)elf64ph->p_offset; + /* We need to claim the memsize plus the file offset since gzip + * will expand the header (file offset), then the kernel, then + * possible rubbish we don't care about. But the kernel bss must + * be claimed (it will be zero'd by the kernel itself) + */ + vmlinux.memsize = (unsigned long)elf64ph->p_memsz + + (unsigned long)elf64ph->p_offset; printf("Allocating 0x%lx bytes for kernel ...\n\r", vmlinux.memsize); vmlinux.addr = try_claim(vmlinux.memsize); if (vmlinux.addr == 0) { diff --git a/arch/ppc64/kernel/idle.c b/arch/ppc64/kernel/idle.c index 8abd2ad9283..8fec2746980 100644 --- a/arch/ppc64/kernel/idle.c +++ b/arch/ppc64/kernel/idle.c @@ -28,6 +28,7 @@ #include <asm/time.h> #include <asm/systemcfg.h> #include <asm/machdep.h> +#include <asm/smp.h> extern void power4_idle(void); diff --git a/arch/ppc64/kernel/kprobes.c b/arch/ppc64/kernel/kprobes.c index ed876a5178a..511af54e623 100644 --- a/arch/ppc64/kernel/kprobes.c +++ b/arch/ppc64/kernel/kprobes.c @@ -30,19 +30,14 @@ #include <linux/config.h> #include <linux/kprobes.h> #include <linux/ptrace.h> -#include <linux/spinlock.h> #include <linux/preempt.h> #include <asm/cacheflush.h> #include <asm/kdebug.h> #include <asm/sstep.h> static DECLARE_MUTEX(kprobe_mutex); - -static struct kprobe *current_kprobe; -static unsigned long kprobe_status, kprobe_saved_msr; -static struct kprobe *kprobe_prev; -static unsigned long kprobe_status_prev, kprobe_saved_msr_prev; -static struct pt_regs jprobe_saved_regs; +DEFINE_PER_CPU(struct kprobe *, current_kprobe) = NULL; +DEFINE_PER_CPU(struct kprobe_ctlblk, kprobe_ctlblk); int __kprobes arch_prepare_kprobe(struct kprobe *p) { @@ -108,20 +103,28 @@ static inline void prepare_singlestep(struct kprobe *p, struct pt_regs *regs) regs->nip = (unsigned long)p->ainsn.insn; } -static inline void save_previous_kprobe(void) +static inline void save_previous_kprobe(struct kprobe_ctlblk *kcb) +{ + kcb->prev_kprobe.kp = kprobe_running(); + kcb->prev_kprobe.status = kcb->kprobe_status; + kcb->prev_kprobe.saved_msr = kcb->kprobe_saved_msr; +} + +static inline void restore_previous_kprobe(struct kprobe_ctlblk *kcb) { - kprobe_prev = current_kprobe; - kprobe_status_prev = kprobe_status; - kprobe_saved_msr_prev = kprobe_saved_msr; + __get_cpu_var(current_kprobe) = kcb->prev_kprobe.kp; + kcb->kprobe_status = kcb->prev_kprobe.status; + kcb->kprobe_saved_msr = kcb->prev_kprobe.saved_msr; } -static inline void restore_previous_kprobe(void) +static inline void set_current_kprobe(struct kprobe *p, struct pt_regs *regs, + struct kprobe_ctlblk *kcb) { - current_kprobe = kprobe_prev; - kprobe_status = kprobe_status_prev; - kprobe_saved_msr = kprobe_saved_msr_prev; + __get_cpu_var(current_kprobe) = p; + kcb->kprobe_saved_msr = regs->msr; } +/* Called with kretprobe_lock held */ void __kprobes arch_prepare_kretprobe(struct kretprobe *rp, struct pt_regs *regs) { @@ -145,19 +148,24 @@ static inline int kprobe_handler(struct pt_regs *regs) struct kprobe *p; int ret = 0; unsigned int *addr = (unsigned int *)regs->nip; + struct kprobe_ctlblk *kcb; + + /* + * We don't want to be preempted for the entire + * duration of kprobe processing + */ + preempt_disable(); + kcb = get_kprobe_ctlblk(); /* Check we're not actually recursing */ if (kprobe_running()) { - /* We *are* holding lock here, so this is safe. - Disarm the probe we just hit, and ignore it. */ p = get_kprobe(addr); if (p) { kprobe_opcode_t insn = *p->ainsn.insn; - if (kprobe_status == KPROBE_HIT_SS && + if (kcb->kprobe_status == KPROBE_HIT_SS && is_trap(insn)) { regs->msr &= ~MSR_SE; - regs->msr |= kprobe_saved_msr; - unlock_kprobes(); + regs->msr |= kcb->kprobe_saved_msr; goto no_kprobe; } /* We have reentered the kprobe_handler(), since @@ -166,27 +174,24 @@ static inline int kprobe_handler(struct pt_regs *regs) * just single step on the instruction of the new probe * without calling any user handlers. */ - save_previous_kprobe(); - current_kprobe = p; - kprobe_saved_msr = regs->msr; + save_previous_kprobe(kcb); + set_current_kprobe(p, regs, kcb); + kcb->kprobe_saved_msr = regs->msr; p->nmissed++; prepare_singlestep(p, regs); - kprobe_status = KPROBE_REENTER; + kcb->kprobe_status = KPROBE_REENTER; return 1; } else { - p = current_kprobe; + p = __get_cpu_var(current_kprobe); if (p->break_handler && p->break_handler(p, regs)) { goto ss_probe; } } - /* If it's not ours, can't be delete race, (we hold lock). */ goto no_kprobe; } - lock_kprobes(); p = get_kprobe(addr); if (!p) { - unlock_kprobes(); if (*addr != BREAKPOINT_INSTRUCTION) { /* * PowerPC has multiple variants of the "trap" @@ -209,24 +214,19 @@ static inline int kprobe_handler(struct pt_regs *regs) goto no_kprobe; } - kprobe_status = KPROBE_HIT_ACTIVE; - current_kprobe = p; - kprobe_saved_msr = regs->msr; + kcb->kprobe_status = KPROBE_HIT_ACTIVE; + set_current_kprobe(p, regs, kcb); if (p->pre_handler && p->pre_handler(p, regs)) /* handler has already set things up, so skip ss setup */ return 1; ss_probe: prepare_singlestep(p, regs); - kprobe_status = KPROBE_HIT_SS; - /* - * This preempt_disable() matches the preempt_enable_no_resched() - * in post_kprobe_handler(). - */ - preempt_disable(); + kcb->kprobe_status = KPROBE_HIT_SS; return 1; no_kprobe: + preempt_enable_no_resched(); return ret; } @@ -251,9 +251,10 @@ int __kprobes trampoline_probe_handler(struct kprobe *p, struct pt_regs *regs) struct kretprobe_instance *ri = NULL; struct hlist_head *head; struct hlist_node *node, *tmp; - unsigned long orig_ret_address = 0; + unsigned long flags, orig_ret_address = 0; unsigned long trampoline_address =(unsigned long)&kretprobe_trampoline; + spin_lock_irqsave(&kretprobe_lock, flags); head = kretprobe_inst_table_head(current); /* @@ -292,12 +293,14 @@ int __kprobes trampoline_probe_handler(struct kprobe *p, struct pt_regs *regs) BUG_ON(!orig_ret_address || (orig_ret_address == trampoline_address)); regs->nip = orig_ret_address; - unlock_kprobes(); + reset_current_kprobe(); + spin_unlock_irqrestore(&kretprobe_lock, flags); + preempt_enable_no_resched(); /* * By returning a non-zero value, we are telling - * kprobe_handler() that we have handled unlocking - * and re-enabling preemption. + * kprobe_handler() that we don't want the post_handler + * to run (and have re-enabled preemption) */ return 1; } @@ -323,23 +326,26 @@ static void __kprobes resume_execution(struct kprobe *p, struct pt_regs *regs) static inline int post_kprobe_handler(struct pt_regs *regs) { - if (!kprobe_running()) + struct kprobe *cur = kprobe_running(); + struct kprobe_ctlblk *kcb = get_kprobe_ctlblk(); + + if (!cur) return 0; - if ((kprobe_status != KPROBE_REENTER) && current_kprobe->post_handler) { - kprobe_status = KPROBE_HIT_SSDONE; - current_kprobe->post_handler(current_kprobe, regs, 0); + if ((kcb->kprobe_status != KPROBE_REENTER) && cur->post_handler) { + kcb->kprobe_status = KPROBE_HIT_SSDONE; + cur->post_handler(cur, regs, 0); } - resume_execution(current_kprobe, regs); - regs->msr |= kprobe_saved_msr; + resume_execution(cur, regs); + regs->msr |= kcb->kprobe_saved_msr; /*Restore back the original saved kprobes variables and continue. */ - if (kprobe_status == KPROBE_REENTER) { - restore_previous_kprobe(); + if (kcb->kprobe_status == KPROBE_REENTER) { + restore_previous_kprobe(kcb); goto out; } - unlock_kprobes(); + reset_current_kprobe(); out: preempt_enable_no_resched(); @@ -354,19 +360,20 @@ out: return 1; } -/* Interrupts disabled, kprobe_lock held. */ static inline int kprobe_fault_handler(struct pt_regs *regs, int trapnr) { - if (current_kprobe->fault_handler - && current_kprobe->fault_handler(current_kprobe, regs, trapnr)) + struct kprobe *cur = kprobe_running(); + struct kprobe_ctlblk *kcb = get_kprobe_ctlblk(); + + if (cur->fault_handler && cur->fault_handler(cur, regs, trapnr)) return 1; - if (kprobe_status & KPROBE_HIT_SS) { - resume_execution(current_kprobe, regs); + if (kcb->kprobe_status & KPROBE_HIT_SS) { + resume_execution(cur, regs); regs->msr &= ~MSR_SE; - regs->msr |= kprobe_saved_msr; + regs->msr |= kcb->kprobe_saved_msr; - unlock_kprobes(); + reset_current_kprobe(); preempt_enable_no_resched(); } return 0; @@ -381,11 +388,6 @@ int __kprobes kprobe_exceptions_notify(struct notifier_block *self, struct die_args *args = (struct die_args *)data; int ret = NOTIFY_DONE; - /* - * Interrupts are not disabled here. We need to disable - * preemption, because kprobe_running() uses smp_processor_id(). - */ - preempt_disable(); switch (val) { case DIE_BPT: if (kprobe_handler(args->regs)) @@ -396,22 +398,25 @@ int __kprobes kprobe_exceptions_notify(struct notifier_block *self, ret = NOTIFY_STOP; break; case DIE_PAGE_FAULT: + /* kprobe_running() needs smp_processor_id() */ + preempt_disable(); if (kprobe_running() && kprobe_fault_handler(args->regs, args->trapnr)) ret = NOTIFY_STOP; + preempt_enable(); break; default: break; } - preempt_enable_no_resched(); return ret; } int __kprobes setjmp_pre_handler(struct kprobe *p, struct pt_regs *regs) { struct jprobe *jp = container_of(p, struct jprobe, kp); + struct kprobe_ctlblk *kcb = get_kprobe_ctlblk(); - memcpy(&jprobe_saved_regs, regs, sizeof(struct pt_regs)); + memcpy(&kcb->jprobe_saved_regs, regs, sizeof(struct pt_regs)); /* setup return addr to the jprobe handler routine */ regs->nip = (unsigned long)(((func_descr_t *)jp->entry)->entry); @@ -431,12 +436,15 @@ void __kprobes jprobe_return_end(void) int __kprobes longjmp_break_handler(struct kprobe *p, struct pt_regs *regs) { + struct kprobe_ctlblk *kcb = get_kprobe_ctlblk(); + /* * FIXME - we should ideally be validating that we got here 'cos * of the "trap" in jprobe_return() above, before restoring the * saved regs... */ - memcpy(regs, &jprobe_saved_regs, sizeof(struct pt_regs)); + memcpy(regs, &kcb->jprobe_saved_regs, sizeof(struct pt_regs)); + preempt_enable_no_resched(); return 1; } diff --git a/arch/ppc64/kernel/lparcfg.c b/arch/ppc64/kernel/lparcfg.c index e86155770bb..3e7b2f28ec8 100644 --- a/arch/ppc64/kernel/lparcfg.c +++ b/arch/ppc64/kernel/lparcfg.c @@ -599,9 +599,7 @@ int __init lparcfg_init(void) void __exit lparcfg_cleanup(void) { if (proc_ppc64_lparcfg) { - if (proc_ppc64_lparcfg->data) { - kfree(proc_ppc64_lparcfg->data); - } + kfree(proc_ppc64_lparcfg->data); remove_proc_entry("lparcfg", proc_ppc64_lparcfg->parent); } } diff --git a/arch/ppc64/kernel/machine_kexec.c b/arch/ppc64/kernel/machine_kexec.c index ff8679f260f..07ea03598c0 100644 --- a/arch/ppc64/kernel/machine_kexec.c +++ b/arch/ppc64/kernel/machine_kexec.c @@ -24,6 +24,7 @@ #include <asm/mmu.h> #include <asm/sections.h> /* _end */ #include <asm/prom.h> +#include <asm/smp.h> #define HASH_GROUP_SIZE 0x80 /* size of each hash group, asm/mmu.h */ diff --git a/arch/ppc64/kernel/misc.S b/arch/ppc64/kernel/misc.S index 077507ffbab..914632ec587 100644 --- a/arch/ppc64/kernel/misc.S +++ b/arch/ppc64/kernel/misc.S @@ -560,7 +560,7 @@ _GLOBAL(real_readb) isync blr - /* +/* * Do an IO access in real mode */ _GLOBAL(real_writeb) @@ -593,6 +593,76 @@ _GLOBAL(real_writeb) #endif /* defined(CONFIG_PPC_PMAC) || defined(CONFIG_PPC_MAPLE) */ /* + * SCOM access functions for 970 (FX only for now) + * + * unsigned long scom970_read(unsigned int address); + * void scom970_write(unsigned int address, unsigned long value); + * + * The address passed in is the 24 bits register address. This code + * is 970 specific and will not check the status bits, so you should + * know what you are doing. + */ +_GLOBAL(scom970_read) + /* interrupts off */ + mfmsr r4 + ori r0,r4,MSR_EE + xori r0,r0,MSR_EE + mtmsrd r0,1 + + /* rotate 24 bits SCOM address 8 bits left and mask out it's low 8 bits + * (including parity). On current CPUs they must be 0'd, + * and finally or in RW bit + */ + rlwinm r3,r3,8,0,15 + ori r3,r3,0x8000 + + /* do the actual scom read */ + sync + mtspr SPRN_SCOMC,r3 + isync + mfspr r3,SPRN_SCOMD + isync + mfspr r0,SPRN_SCOMC + isync + + /* XXX: fixup result on some buggy 970's (ouch ! we lost a bit, bah + * that's the best we can do). Not implemented yet as we don't use + * the scom on any of the bogus CPUs yet, but may have to be done + * ultimately + */ + + /* restore interrupts */ + mtmsrd r4,1 + blr + + +_GLOBAL(scom970_write) + /* interrupts off */ + mfmsr r5 + ori r0,r5,MSR_EE + xori r0,r0,MSR_EE + mtmsrd r0,1 + + /* rotate 24 bits SCOM address 8 bits left and mask out it's low 8 bits + * (including parity). On current CPUs they must be 0'd. + */ + + rlwinm r3,r3,8,0,15 + + sync + mtspr SPRN_SCOMD,r4 /* write data */ + isync + mtspr SPRN_SCOMC,r3 /* write command */ + isync + mfspr 3,SPRN_SCOMC + isync + + /* restore interrupts */ + mtmsrd r5,1 + blr + + +/* * Create a kernel thread * kernel_thread(fn, arg, flags) */ diff --git a/arch/ppc64/kernel/pci.c b/arch/ppc64/kernel/pci.c index 3d2106b022a..30247ff7497 100644 --- a/arch/ppc64/kernel/pci.c +++ b/arch/ppc64/kernel/pci.c @@ -295,8 +295,8 @@ static void pci_parse_of_addrs(struct device_node *node, struct pci_dev *dev) } } -static struct pci_dev *of_create_pci_dev(struct device_node *node, - struct pci_bus *bus, int devfn) +struct pci_dev *of_create_pci_dev(struct device_node *node, + struct pci_bus *bus, int devfn) { struct pci_dev *dev; const char *type; @@ -354,10 +354,9 @@ static struct pci_dev *of_create_pci_dev(struct device_node *node, return dev; } +EXPORT_SYMBOL(of_create_pci_dev); -static void of_scan_pci_bridge(struct device_node *node, struct pci_dev *dev); - -static void __devinit of_scan_bus(struct device_node *node, +void __devinit of_scan_bus(struct device_node *node, struct pci_bus *bus) { struct device_node *child = NULL; @@ -381,9 +380,10 @@ static void __devinit of_scan_bus(struct device_node *node, do_bus_setup(bus); } +EXPORT_SYMBOL(of_scan_bus); -static void __devinit of_scan_pci_bridge(struct device_node *node, - struct pci_dev *dev) +void __devinit of_scan_pci_bridge(struct device_node *node, + struct pci_dev *dev) { struct pci_bus *bus; u32 *busrange, *ranges; @@ -464,9 +464,10 @@ static void __devinit of_scan_pci_bridge(struct device_node *node, else if (mode == PCI_PROBE_NORMAL) pci_scan_child_bus(bus); } +EXPORT_SYMBOL(of_scan_pci_bridge); #endif /* CONFIG_PPC_MULTIPLATFORM */ -static void __devinit scan_phb(struct pci_controller *hose) +void __devinit scan_phb(struct pci_controller *hose) { struct pci_bus *bus; struct device_node *node = hose->arch_data; diff --git a/arch/ppc64/kernel/prom.c b/arch/ppc64/kernel/prom.c index dece31e58bc..3402fbee62c 100644 --- a/arch/ppc64/kernel/prom.c +++ b/arch/ppc64/kernel/prom.c @@ -31,6 +31,7 @@ #include <linux/initrd.h> #include <linux/bitops.h> #include <linux/module.h> +#include <linux/module.h> #include <asm/prom.h> #include <asm/rtas.h> @@ -46,7 +47,6 @@ #include <asm/pgtable.h> #include <asm/pci.h> #include <asm/iommu.h> -#include <asm/ppcdebug.h> #include <asm/btext.h> #include <asm/sections.h> #include <asm/machdep.h> @@ -1866,17 +1866,32 @@ get_property(struct device_node *np, const char *name, int *lenp) EXPORT_SYMBOL(get_property); /* - * Add a property to a node + * Add a property to a node. */ -void +int prom_add_property(struct device_node* np, struct property* prop) { - struct property **next = &np->properties; + struct property **next; prop->next = NULL; - while (*next) + write_lock(&devtree_lock); + next = &np->properties; + while (*next) { + if (strcmp(prop->name, (*next)->name) == 0) { + /* duplicate ! don't insert it */ + write_unlock(&devtree_lock); + return -1; + } next = &(*next)->next; + } *next = prop; + write_unlock(&devtree_lock); + + /* try to add to proc as well if it was initialized */ + if (np->pde) + proc_device_tree_add_prop(np->pde, prop); + + return 0; } #if 0 diff --git a/arch/ppc64/kernel/prom_init.c b/arch/ppc64/kernel/prom_init.c index a4bbca6dbb8..e4c880dab99 100644 --- a/arch/ppc64/kernel/prom_init.c +++ b/arch/ppc64/kernel/prom_init.c @@ -44,7 +44,6 @@ #include <asm/pgtable.h> #include <asm/pci.h> #include <asm/iommu.h> -#include <asm/ppcdebug.h> #include <asm/btext.h> #include <asm/sections.h> #include <asm/machdep.h> @@ -1825,7 +1824,7 @@ static void __init fixup_device_tree(void) if (prom_getprop(u3, "device-rev", &u3_rev, sizeof(u3_rev)) == PROM_ERROR) return; - if (u3_rev != 0x35 && u3_rev != 0x37) + if (u3_rev < 0x35 || u3_rev > 0x39) return; /* does it need fixup ? */ if (prom_getproplen(i2c, "interrupts") > 0) diff --git a/arch/ppc64/kernel/rtas_pci.c b/arch/ppc64/kernel/rtas_pci.c index 3ad15c90fbb..3c3f19192fc 100644 --- a/arch/ppc64/kernel/rtas_pci.c +++ b/arch/ppc64/kernel/rtas_pci.c @@ -440,7 +440,6 @@ struct pci_controller * __devinit init_phb_dynamic(struct device_node *dn) struct device_node *root = of_find_node_by_path("/"); unsigned int root_size_cells = 0; struct pci_controller *phb; - struct pci_bus *bus; int primary; root_size_cells = prom_n_size_cells(root); @@ -456,10 +455,7 @@ struct pci_controller * __devinit init_phb_dynamic(struct device_node *dn) of_node_put(root); pci_devs_phb_init_dynamic(phb); - phb->last_busno = 0xff; - bus = pci_scan_bus(phb->first_busno, phb->ops, phb->arch_data); - phb->bus = bus; - phb->last_busno = bus->subordinate; + scan_phb(phb); return phb; } diff --git a/arch/ppc64/kernel/scanlog.c b/arch/ppc64/kernel/scanlog.c index 215bf890030..2edc947f7c4 100644 --- a/arch/ppc64/kernel/scanlog.c +++ b/arch/ppc64/kernel/scanlog.c @@ -225,8 +225,7 @@ int __init scanlog_init(void) void __exit scanlog_cleanup(void) { if (proc_ppc64_scan_log_dump) { - if (proc_ppc64_scan_log_dump->data) - kfree(proc_ppc64_scan_log_dump->data); + kfree(proc_ppc64_scan_log_dump->data); remove_proc_entry("scan-log-dump", proc_ppc64_scan_log_dump->parent); } } diff --git a/arch/ppc64/kernel/sysfs.c b/arch/ppc64/kernel/sysfs.c index 6654b350979..e99ec62c2c5 100644 --- a/arch/ppc64/kernel/sysfs.c +++ b/arch/ppc64/kernel/sysfs.c @@ -20,6 +20,7 @@ #include <asm/paca.h> #include <asm/lppaca.h> #include <asm/machdep.h> +#include <asm/smp.h> static DEFINE_PER_CPU(struct cpu, cpu_devices); diff --git a/arch/ppc64/kernel/udbg.c b/arch/ppc64/kernel/udbg.c index d49c3613c8e..0d878e72fc4 100644 --- a/arch/ppc64/kernel/udbg.c +++ b/arch/ppc64/kernel/udbg.c @@ -10,12 +10,10 @@ */ #include <stdarg.h> -#define WANT_PPCDBG_TAB /* Only defined here */ #include <linux/config.h> #include <linux/types.h> #include <linux/sched.h> #include <linux/console.h> -#include <asm/ppcdebug.h> #include <asm/processor.h> void (*udbg_putc)(unsigned char c); @@ -89,59 +87,6 @@ void udbg_printf(const char *fmt, ...) va_end(args); } -/* PPCDBG stuff */ - -u64 ppc64_debug_switch; - -/* Special print used by PPCDBG() macro */ -void udbg_ppcdbg(unsigned long debug_flags, const char *fmt, ...) -{ - unsigned long active_debugs = debug_flags & ppc64_debug_switch; - - if (active_debugs) { - va_list ap; - unsigned char buf[UDBG_BUFSIZE]; - unsigned long i, len = 0; - - for (i=0; i < PPCDBG_NUM_FLAGS; i++) { - if (((1U << i) & active_debugs) && - trace_names[i]) { - len += strlen(trace_names[i]); - udbg_puts(trace_names[i]); - break; - } - } - - snprintf(buf, UDBG_BUFSIZE, " [%s]: ", current->comm); - len += strlen(buf); - udbg_puts(buf); - - while (len < 18) { - udbg_puts(" "); - len++; - } - - va_start(ap, fmt); - vsnprintf(buf, UDBG_BUFSIZE, fmt, ap); - udbg_puts(buf); - va_end(ap); - } -} - -unsigned long udbg_ifdebug(unsigned long flags) -{ - return (flags & ppc64_debug_switch); -} - -/* - * Initialize the PPCDBG state. Called before relocation has been enabled. - */ -void __init ppcdbg_initialize(void) -{ - ppc64_debug_switch = PPC_DEBUG_DEFAULT; /* | PPCDBG_BUSWALK | */ - /* PPCDBG_PHBINIT | PPCDBG_MM | PPCDBG_MMINIT | PPCDBG_TCEINIT | PPCDBG_TCE */; -} - /* * Early boot console based on udbg */ diff --git a/arch/s390/Makefile b/arch/s390/Makefile index 98db30481d9..73a09a6ee6c 100644 --- a/arch/s390/Makefile +++ b/arch/s390/Makefile @@ -76,9 +76,7 @@ AFLAGS += $(aflags-y) OBJCOPYFLAGS := -O binary LDFLAGS_vmlinux := -e start -head-$(CONFIG_ARCH_S390_31) += arch/$(ARCH)/kernel/head.o -head-$(CONFIG_ARCH_S390X) += arch/$(ARCH)/kernel/head64.o -head-y += arch/$(ARCH)/kernel/init_task.o +head-y := arch/$(ARCH)/kernel/head.o arch/$(ARCH)/kernel/init_task.o core-y += arch/$(ARCH)/mm/ arch/$(ARCH)/kernel/ arch/$(ARCH)/crypto/ \ arch/$(ARCH)/appldata/ diff --git a/arch/s390/appldata/appldata_base.c b/arch/s390/appldata/appldata_base.c index c9f2f60cfa5..dee6ab54984 100644 --- a/arch/s390/appldata/appldata_base.c +++ b/arch/s390/appldata/appldata_base.c @@ -592,12 +592,15 @@ int appldata_register_ops(struct appldata_ops *ops) */ void appldata_unregister_ops(struct appldata_ops *ops) { + void *table; spin_lock(&appldata_ops_lock); - unregister_sysctl_table(ops->sysctl_header); list_del(&ops->list); - kfree(ops->ctl_table); + /* at that point any incoming access will fail */ + table = ops->ctl_table; ops->ctl_table = NULL; spin_unlock(&appldata_ops_lock); + unregister_sysctl_table(ops->sysctl_header); + kfree(table); P_INFO("%s-ops unregistered!\n", ops->name); } /********************** module-ops management <END> **************************/ diff --git a/arch/s390/kernel/Makefile b/arch/s390/kernel/Makefile index 8584dd82321..7434c32bc63 100644 --- a/arch/s390/kernel/Makefile +++ b/arch/s390/kernel/Makefile @@ -8,9 +8,7 @@ obj-y := bitmap.o traps.o time.o process.o \ setup.o sys_s390.o ptrace.o signal.o cpcmd.o ebcdic.o \ semaphore.o s390_ext.o debug.o profile.o irq.o reipl_diag.o -extra-$(CONFIG_ARCH_S390_31) += head.o -extra-$(CONFIG_ARCH_S390X) += head64.o -extra-y += init_task.o vmlinux.lds +extra-y += head.o init_task.o vmlinux.lds obj-$(CONFIG_MODULES) += s390_ksyms.o module.o obj-$(CONFIG_SMP) += smp.o diff --git a/arch/s390/kernel/entry.S b/arch/s390/kernel/entry.S index 9b30f4cf32c..27b07730b7b 100644 --- a/arch/s390/kernel/entry.S +++ b/arch/s390/kernel/entry.S @@ -288,7 +288,7 @@ sysc_sigpending: bo BASED(sysc_restart) tm __TI_flags+3(%r9),_TIF_SINGLE_STEP bo BASED(sysc_singlestep) - b BASED(sysc_leave) # out of here, do NOT recheck + b BASED(sysc_work_loop) # # _TIF_RESTART_SVC is set, set up registers and restart svc @@ -645,7 +645,7 @@ io_sigpending: l %r1,BASED(.Ldo_signal) basr %r14,%r1 # call do_signal stnsm __SF_EMPTY(%r15),0xfc # disable I/O and ext. interrupts - b BASED(io_leave) # out of here, do NOT recheck + b BASED(io_work_loop) /* * External interrupt handler routine diff --git a/arch/s390/kernel/entry64.S b/arch/s390/kernel/entry64.S index 7b9b4a2ba1d..4eb71ffcf48 100644 --- a/arch/s390/kernel/entry64.S +++ b/arch/s390/kernel/entry64.S @@ -283,7 +283,7 @@ sysc_sigpending: jo sysc_restart tm __TI_flags+7(%r9),_TIF_SINGLE_STEP jo sysc_singlestep - j sysc_leave # out of here, do NOT recheck + j sysc_work_loop # # _TIF_RESTART_SVC is set, set up registers and restart svc @@ -684,7 +684,7 @@ io_sigpending: slgr %r3,%r3 # clear *oldset brasl %r14,do_signal # call do_signal stnsm __SF_EMPTY(%r15),0xfc # disable I/O and ext. interrupts - j sysc_leave # out of here, do NOT recheck + j io_work_loop /* * External interrupt handler routine diff --git a/arch/s390/kernel/head.S b/arch/s390/kernel/head.S index 039354d7234..d31a97c89f6 100644 --- a/arch/s390/kernel/head.S +++ b/arch/s390/kernel/head.S @@ -1,11 +1,12 @@ /* * arch/s390/kernel/head.S * - * S390 version - * Copyright (C) 1999,2000 IBM Deutschland Entwicklung GmbH, IBM Corporation - * Author(s): Hartmut Penner (hp@de.ibm.com), - * Martin Schwidefsky (schwidefsky@de.ibm.com), - * Rob van der Heij (rvdhei@iae.nl) + * (C) Copyright IBM Corp. 1999, 2005 + * + * Author(s): Hartmut Penner <hp@de.ibm.com> + * Martin Schwidefsky <schwidefsky@de.ibm.com> + * Rob van der Heij <rvdhei@iae.nl> + * Heiko Carstens <heiko.carstens@de.ibm.com> * * There are 5 different IPL methods * 1) load the image directly into ram at address 0 and do an PSW restart @@ -19,12 +20,7 @@ * 5) direct call of start by the SALIPL loader * We use the cpuid to distinguish between VM and native ipl * params for kernel are pushed to 0x10400 (see setup.h) - - Changes: - Okt 25 2000 <rvdheij@iae.nl> - added code to skip HDR and EOF to allow SL tape IPL (5 retries) - changed first CCW from rewind to backspace block - + * */ #include <linux/config.h> @@ -34,6 +30,12 @@ #include <asm/thread_info.h> #include <asm/page.h> +#ifdef CONFIG_ARCH_S390X +#define ARCH_OFFSET 4 +#else +#define ARCH_OFFSET 0 +#endif + #ifndef CONFIG_IPL .org 0 .long 0x00080000,0x80000000+startup # Just a restart PSW @@ -201,7 +203,7 @@ ssch 0(%r3) # load chunk of 1600 bytes bnz .Llderr .Lwait4irq: - mvc __LC_IO_NEW_PSW(8),.Lnewpsw # set up IO interrupt psw + mvc 0x78(8),.Lnewpsw # set up IO interrupt psw lpsw .Lwaitpsw .Lioint: c %r1,0xb8 # compare subchannel number @@ -265,13 +267,13 @@ iplstart: la %r2,IPL_BS # load start address bas %r14,.Lloader # load rest of ipl image l %r12,.Lparm # pointer to parameter area - st %r1,IPL_DEVICE-PARMAREA(%r12) # store ipl device number + st %r1,IPL_DEVICE+ARCH_OFFSET-PARMAREA(%r12) # save ipl device number # # load parameter file from ipl device # .Lagain1: - l %r2,INITRD_START-PARMAREA(%r12) # use ramdisk location as temp + l %r2,INITRD_START+ARCH_OFFSET-PARMAREA(%r12) # ramdisk loc. is temp bas %r14,.Lloader # load parameter file ltr %r2,%r2 # got anything ? bz .Lnopf @@ -279,7 +281,7 @@ iplstart: bnh .Lnotrunc la %r2,895 .Lnotrunc: - l %r4,INITRD_START-PARMAREA(%r12) + l %r4,INITRD_START+ARCH_OFFSET-PARMAREA(%r12) clc 0(3,%r4),.L_hdr # if it is HDRx bz .Lagain1 # skip dataset header clc 0(3,%r4),.L_eof # if it is EOFx @@ -322,14 +324,14 @@ iplstart: # load ramdisk from ipl device # .Lagain2: - l %r2,INITRD_START-PARMAREA(%r12) # load adr. of ramdisk + l %r2,INITRD_START+ARCH_OFFSET-PARMAREA(%r12) # addr of ramdisk bas %r14,.Lloader # load ramdisk - st %r2,INITRD_SIZE-PARMAREA(%r12) # store size of ramdisk + st %r2,INITRD_SIZE+ARCH_OFFSET-PARMAREA(%r12) # store size of ramdisk ltr %r2,%r2 bnz .Lrdcont - st %r2,INITRD_START-PARMAREA(%r12) # no ramdisk found, null it + st %r2,INITRD_START+ARCH_OFFSET-PARMAREA(%r12) # no ramdisk found .Lrdcont: - l %r2,INITRD_START-PARMAREA(%r12) + l %r2,INITRD_START+ARCH_OFFSET-PARMAREA(%r12) clc 0(3,%r2),.L_hdr # skip HDRx and EOFx bz .Lagain2 @@ -432,10 +434,10 @@ start: la %r3,1(%r3) .done: l %r1,.memsize - st %r3,0(%r1) + st %r3,ARCH_OFFSET(%r1) slr %r0,%r0 - st %r0,INITRD_SIZE-PARMAREA(%r11) - st %r0,INITRD_START-PARMAREA(%r11) + st %r0,INITRD_SIZE+ARCH_OFFSET-PARMAREA(%r11) + st %r0,INITRD_START+ARCH_OFFSET-PARMAREA(%r11) j startup # continue with startup .tbl: .long _ebcasc # translate table .cmd: .long COMMAND_LINE # address of command line buffer @@ -478,304 +480,23 @@ start: .byte 0xf0,0xf1,0xf2,0xf3,0xf4,0xf5,0xf6,0xf7 .byte 0xf8,0xf9,0xfa,0xfb,0xfc,0xfd,0xfe,0xff -# -# startup-code at 0x10000, running in real mode -# this is called either by the ipl loader or directly by PSW restart -# or linload or SALIPL -# - .org 0x10000 -startup:basr %r13,0 # get base -.LPG1: l %r1, .Lget_ipl_device_addr-.LPG1(%r13) - basr %r14, %r1 - lctl %c0,%c15,.Lctl-.LPG1(%r13) # load control registers - la %r12,_pstart-.LPG1(%r13) # pointer to parameter area - # move IPL device to lowcore - mvc __LC_IPLDEV(4),IPL_DEVICE-PARMAREA(%r12) - -# -# clear bss memory -# - l %r2,.Lbss_bgn-.LPG1(%r13) # start of bss - l %r3,.Lbss_end-.LPG1(%r13) # end of bss - sr %r3,%r2 # length of bss - sr %r4,%r4 # - sr %r5,%r5 # set src,length and pad to zero - sr %r0,%r0 # - mvcle %r2,%r4,0 # clear mem - jo .-4 # branch back, if not finish - - l %r2,.Lrcp-.LPG1(%r13) # Read SCP forced command word -.Lservicecall: - stosm .Lpmask-.LPG1(%r13),0x01 # authorize ext interrupts - - stctl %r0, %r0,.Lcr-.LPG1(%r13) # get cr0 - la %r1,0x200 # set bit 22 - o %r1,.Lcr-.LPG1(%r13) # or old cr0 with r1 - st %r1,.Lcr-.LPG1(%r13) - lctl %r0, %r0,.Lcr-.LPG1(%r13) # load modified cr0 - - mvc __LC_EXT_NEW_PSW(8),.Lpcext-.LPG1(%r13) # set postcall psw - la %r1, .Lsclph-.LPG1(%r13) - a %r1,__LC_EXT_NEW_PSW+4 # set handler - st %r1,__LC_EXT_NEW_PSW+4 - - la %r4,_pstart-.LPG1(%r13) # %r4 is our index for sccb stuff - la %r1, .Lsccb-PARMAREA(%r4) # our sccb - .insn rre,0xb2200000,%r2,%r1 # service call - ipm %r1 - srl %r1,28 # get cc code - xr %r3, %r3 - chi %r1,3 - be .Lfchunk-.LPG1(%r13) # leave - chi %r1,2 - be .Lservicecall-.LPG1(%r13) - lpsw .Lwaitsclp-.LPG1(%r13) -.Lsclph: - lh %r1,.Lsccbr-PARMAREA(%r4) - chi %r1,0x10 # 0x0010 is the sucess code - je .Lprocsccb # let's process the sccb - chi %r1,0x1f0 - bne .Lfchunk-.LPG1(%r13) # unhandled error code - c %r2, .Lrcp-.LPG1(%r13) # Did we try Read SCP forced - bne .Lfchunk-.LPG1(%r13) # if no, give up - l %r2, .Lrcp2-.LPG1(%r13) # try with Read SCP - b .Lservicecall-.LPG1(%r13) -.Lprocsccb: - lhi %r1,0 - icm %r1,3,.Lscpincr1-PARMAREA(%r4) # use this one if != 0 - jnz .Lscnd - lhi %r1,0x800 # otherwise report 2GB -.Lscnd: - lhi %r3,0x800 # limit reported memory size to 2GB - cr %r1,%r3 - jl .Lno2gb - lr %r1,%r3 -.Lno2gb: - xr %r3,%r3 # same logic - ic %r3,.Lscpa1-PARMAREA(%r4) - chi %r3,0x00 - jne .Lcompmem - l %r3,.Lscpa2-PARMAREA(%r13) -.Lcompmem: - mr %r2,%r1 # mem in MB on 128-bit - l %r1,.Lonemb-.LPG1(%r13) - mr %r2,%r1 # mem size in bytes in %r3 - b .Lfchunk-.LPG1(%r13) - - .align 4 -.Lget_ipl_device_addr: - .long .Lget_ipl_device -.Lpmask: - .byte 0 -.align 8 -.Lpcext:.long 0x00080000,0x80000000 -.Lcr: - .long 0x00 # place holder for cr0 -.Lwaitsclp: - .long 0x020A0000 - .long .Lsclph -.Lrcp: - .int 0x00120001 # Read SCP forced code -.Lrcp2: - .int 0x00020001 # Read SCP code -.Lonemb: - .int 0x100000 -.Lfchunk: - -# -# find memory chunks. -# - lr %r9,%r3 # end of mem - mvc __LC_PGM_NEW_PSW(8),.Lpcmem-.LPG1(%r13) - la %r1,1 # test in increments of 128KB - sll %r1,17 - l %r3,.Lmchunk-.LPG1(%r13) # get pointer to memory_chunk array - slr %r4,%r4 # set start of chunk to zero - slr %r5,%r5 # set end of chunk to zero - slr %r6,%r6 # set access code to zero - la %r10, MEMORY_CHUNKS # number of chunks -.Lloop: - tprot 0(%r5),0 # test protection of first byte - ipm %r7 - srl %r7,28 - clr %r6,%r7 # compare cc with last access code - be .Lsame-.LPG1(%r13) - b .Lchkmem-.LPG1(%r13) -.Lsame: - ar %r5,%r1 # add 128KB to end of chunk - bno .Lloop-.LPG1(%r13) # r1 < 0x80000000 -> loop -.Lchkmem: # > 2GB or tprot got a program check - clr %r4,%r5 # chunk size > 0? - be .Lchkloop-.LPG1(%r13) - st %r4,0(%r3) # store start address of chunk - lr %r0,%r5 - slr %r0,%r4 - st %r0,4(%r3) # store size of chunk - st %r6,8(%r3) # store type of chunk - la %r3,12(%r3) - l %r4,.Lmemsize-.LPG1(%r13) # address of variable memory_size - st %r5,0(%r4) # store last end to memory size - ahi %r10,-1 # update chunk number -.Lchkloop: - lr %r6,%r7 # set access code to last cc - # we got an exception or we're starting a new - # chunk , we must check if we should - # still try to find valid memory (if we detected - # the amount of available storage), and if we - # have chunks left - xr %r0,%r0 - clr %r0,%r9 # did we detect memory? - je .Ldonemem # if not, leave - chi %r10,0 # do we have chunks left? - je .Ldonemem - alr %r5,%r1 # add 128KB to end of chunk - lr %r4,%r5 # potential new chunk - clr %r5,%r9 # should we go on? - jl .Lloop -.Ldonemem: - l %r12,.Lmflags-.LPG1(%r13) # get address of machine_flags -# -# find out if we are running under VM -# - stidp __LC_CPUID # store cpuid - tm __LC_CPUID,0xff # running under VM ? - bno .Lnovm-.LPG1(%r13) - oi 3(%r12),1 # set VM flag -.Lnovm: - lh %r0,__LC_CPUID+4 # get cpu version - chi %r0,0x7490 # running on a P/390 ? - bne .Lnop390-.LPG1(%r13) - oi 3(%r12),4 # set P/390 flag -.Lnop390: - -# -# find out if we have an IEEE fpu -# - mvc __LC_PGM_NEW_PSW(8),.Lpcfpu-.LPG1(%r13) - efpc %r0,0 # test IEEE extract fpc instruction - oi 3(%r12),2 # set IEEE fpu flag -.Lchkfpu: - -# -# find out if we have the CSP instruction -# - mvc __LC_PGM_NEW_PSW(8),.Lpccsp-.LPG1(%r13) - la %r0,0 - lr %r1,%r0 - la %r2,4 - csp %r0,%r2 # Test CSP instruction - oi 3(%r12),8 # set CSP flag -.Lchkcsp: - -# -# find out if we have the MVPG instruction -# - mvc __LC_PGM_NEW_PSW(8),.Lpcmvpg-.LPG1(%r13) - sr %r0,%r0 - la %r1,0 - la %r2,0 - mvpg %r1,%r2 # Test CSP instruction - oi 3(%r12),16 # set MVPG flag -.Lchkmvpg: - -# -# find out if we have the IDTE instruction -# - mvc __LC_PGM_NEW_PSW(8),.Lpcidte-.LPG1(%r13) - .long 0xb2b10000 # store facility list - tm 0xc8,0x08 # check bit for clearing-by-ASCE - bno .Lchkidte-.LPG1(%r13) - lhi %r1,2094 - lhi %r2,0 - .long 0xb98e2001 - oi 3(%r12),0x80 # set IDTE flag -.Lchkidte: - - lpsw .Lentry-.LPG1(13) # jump to _stext in primary-space, - # virtual and never return ... - .align 8 -.Lentry:.long 0x00080000,0x80000000 + _stext -.Lctl: .long 0x04b50002 # cr0: various things - .long 0 # cr1: primary space segment table - .long .Lduct # cr2: dispatchable unit control table - .long 0 # cr3: instruction authorization - .long 0 # cr4: instruction authorization - .long 0xffffffff # cr5: primary-aste origin - .long 0 # cr6: I/O interrupts - .long 0 # cr7: secondary space segment table - .long 0 # cr8: access registers translation - .long 0 # cr9: tracing off - .long 0 # cr10: tracing off - .long 0 # cr11: tracing off - .long 0 # cr12: tracing off - .long 0 # cr13: home space segment table - .long 0xc0000000 # cr14: machine check handling off - .long 0 # cr15: linkage stack operations -.Lpcmem:.long 0x00080000,0x80000000 + .Lchkmem -.Lpcfpu:.long 0x00080000,0x80000000 + .Lchkfpu -.Lpccsp:.long 0x00080000,0x80000000 + .Lchkcsp -.Lpcmvpg:.long 0x00080000,0x80000000 + .Lchkmvpg -.Lpcidte:.long 0x00080000,0x80000000 + .Lchkidte -.Lmemsize:.long memory_size -.Lmchunk:.long memory_chunk -.Lmflags:.long machine_flags -.Lbss_bgn: .long __bss_start -.Lbss_end: .long _end - - .org PARMAREA-64 -.Lduct: .long 0,0,0,0,0,0,0,0 - .long 0,0,0,0,0,0,0,0 - -# -# params at 10400 (setup.h) -# - .org PARMAREA - .global _pstart -_pstart: - .long 0,0 # IPL_DEVICE - .long 0,RAMDISK_ORIGIN # INITRD_START - .long 0,RAMDISK_SIZE # INITRD_SIZE - - .org COMMAND_LINE - .byte "root=/dev/ram0 ro" - .byte 0 - .org 0x11000 -.Lsccb: - .hword 0x1000 # length, one page - .byte 0x00,0x00,0x00 - .byte 0x80 # variable response bit set -.Lsccbr: - .hword 0x00 # response code -.Lscpincr1: - .hword 0x00 -.Lscpa1: - .byte 0x00 - .fill 89,1,0 -.Lscpa2: - .int 0x00 -.Lscpincr2: - .quad 0x00 - .fill 3984,1,0 - .org 0x12000 - .global _pend -_pend: - +.macro GET_IPL_DEVICE .Lget_ipl_device: basr %r12,0 -.LPG2: l %r1,0xb8 # get sid +.LGID: l %r1,0xb8 # get sid sll %r1,15 # test if subchannel is enabled srl %r1,31 ltr %r1,%r1 bz 0(%r14) # subchannel disabled l %r1,0xb8 - la %r5,.Lipl_schib-.LPG2(%r12) + la %r5,.Lipl_schib-.LGID(%r12) stsch 0(%r5) # get schib of subchannel bnz 0(%r14) # schib not available tm 5(%r5),0x01 # devno valid? bno 0(%r14) - la %r6,ipl_parameter_flags-.LPG2(%r12) + la %r6,ipl_parameter_flags-.LGID(%r12) oi 3(%r6),0x01 # set flag - la %r2,ipl_devno-.LPG2(%r12) + la %r2,ipl_devno-.LGID(%r12) mvc 0(2,%r2),6(%r5) # store devno tm 4(%r5),0x80 # qdio capable device? bno 0(%r14) @@ -816,46 +537,10 @@ ipl_parameter_flags: .globl ipl_devno ipl_devno: .word 0 +.endm -#ifdef CONFIG_SHARED_KERNEL - .org 0x100000 +#ifdef CONFIG_ARCH_S390X +#include "head64.S" +#else +#include "head31.S" #endif - -# -# startup-code, running in virtual mode -# - .globl _stext -_stext: basr %r13,0 # get base -.LPG3: -# -# Setup stack -# - l %r15,.Linittu-.LPG3(%r13) - mvc __LC_CURRENT(4),__TI_task(%r15) - ahi %r15,1<<(PAGE_SHIFT+THREAD_ORDER) # init_task_union + THREAD_SIZE - st %r15,__LC_KERNEL_STACK # set end of kernel stack - ahi %r15,-96 - xc __SF_BACKCHAIN(4,%r15),__SF_BACKCHAIN(%r15) # clear backchain - -# check control registers - stctl %c0,%c15,0(%r15) - oi 2(%r15),0x40 # enable sigp emergency signal - oi 0(%r15),0x10 # switch on low address protection - lctl %c0,%c15,0(%r15) - -# - lam 0,15,.Laregs-.LPG3(%r13) # load access regs needed by uaccess - l %r14,.Lstart-.LPG3(%r13) - basr %r14,%r14 # call start_kernel -# -# We returned from start_kernel ?!? PANIK -# - basr %r13,0 - lpsw .Ldw-.(%r13) # load disabled wait psw -# - .align 8 -.Ldw: .long 0x000a0000,0x00000000 -.Linittu: .long init_thread_union -.Lstart: .long start_kernel -.Laregs: .long 0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0 - diff --git a/arch/s390/kernel/head31.S b/arch/s390/kernel/head31.S new file mode 100644 index 00000000000..2d3b089bfb8 --- /dev/null +++ b/arch/s390/kernel/head31.S @@ -0,0 +1,336 @@ +/* + * arch/s390/kernel/head31.S + * + * (C) Copyright IBM Corp. 2005 + * + * Author(s): Hartmut Penner <hp@de.ibm.com> + * Martin Schwidefsky <schwidefsky@de.ibm.com> + * Rob van der Heij <rvdhei@iae.nl> + * Heiko Carstens <heiko.carstens@de.ibm.com> + * + */ + +# +# startup-code at 0x10000, running in absolute addressing mode +# this is called either by the ipl loader or directly by PSW restart +# or linload or SALIPL +# + .org 0x10000 +startup:basr %r13,0 # get base +.LPG1: l %r1, .Lget_ipl_device_addr-.LPG1(%r13) + basr %r14, %r1 + lctl %c0,%c15,.Lctl-.LPG1(%r13) # load control registers + la %r12,_pstart-.LPG1(%r13) # pointer to parameter area + # move IPL device to lowcore + mvc __LC_IPLDEV(4),IPL_DEVICE-PARMAREA(%r12) + +# +# clear bss memory +# + l %r2,.Lbss_bgn-.LPG1(%r13) # start of bss + l %r3,.Lbss_end-.LPG1(%r13) # end of bss + sr %r3,%r2 # length of bss + sr %r4,%r4 + sr %r5,%r5 # set src,length and pad to zero + sr %r0,%r0 + mvcle %r2,%r4,0 # clear mem + jo .-4 # branch back, if not finish + + l %r2,.Lrcp-.LPG1(%r13) # Read SCP forced command word +.Lservicecall: + stosm .Lpmask-.LPG1(%r13),0x01 # authorize ext interrupts + + stctl %r0, %r0,.Lcr-.LPG1(%r13) # get cr0 + la %r1,0x200 # set bit 22 + o %r1,.Lcr-.LPG1(%r13) # or old cr0 with r1 + st %r1,.Lcr-.LPG1(%r13) + lctl %r0, %r0,.Lcr-.LPG1(%r13) # load modified cr0 + + mvc __LC_EXT_NEW_PSW(8),.Lpcext-.LPG1(%r13) # set postcall psw + la %r1, .Lsclph-.LPG1(%r13) + a %r1,__LC_EXT_NEW_PSW+4 # set handler + st %r1,__LC_EXT_NEW_PSW+4 + + la %r4,_pstart-.LPG1(%r13) # %r4 is our index for sccb stuff + la %r1, .Lsccb-PARMAREA(%r4) # our sccb + .insn rre,0xb2200000,%r2,%r1 # service call + ipm %r1 + srl %r1,28 # get cc code + xr %r3, %r3 + chi %r1,3 + be .Lfchunk-.LPG1(%r13) # leave + chi %r1,2 + be .Lservicecall-.LPG1(%r13) + lpsw .Lwaitsclp-.LPG1(%r13) +.Lsclph: + lh %r1,.Lsccbr-PARMAREA(%r4) + chi %r1,0x10 # 0x0010 is the sucess code + je .Lprocsccb # let's process the sccb + chi %r1,0x1f0 + bne .Lfchunk-.LPG1(%r13) # unhandled error code + c %r2, .Lrcp-.LPG1(%r13) # Did we try Read SCP forced + bne .Lfchunk-.LPG1(%r13) # if no, give up + l %r2, .Lrcp2-.LPG1(%r13) # try with Read SCP + b .Lservicecall-.LPG1(%r13) +.Lprocsccb: + lhi %r1,0 + icm %r1,3,.Lscpincr1-PARMAREA(%r4) # use this one if != 0 + jnz .Lscnd + lhi %r1,0x800 # otherwise report 2GB +.Lscnd: + lhi %r3,0x800 # limit reported memory size to 2GB + cr %r1,%r3 + jl .Lno2gb + lr %r1,%r3 +.Lno2gb: + xr %r3,%r3 # same logic + ic %r3,.Lscpa1-PARMAREA(%r4) + chi %r3,0x00 + jne .Lcompmem + l %r3,.Lscpa2-PARMAREA(%r13) +.Lcompmem: + mr %r2,%r1 # mem in MB on 128-bit + l %r1,.Lonemb-.LPG1(%r13) + mr %r2,%r1 # mem size in bytes in %r3 + b .Lfchunk-.LPG1(%r13) + + .align 4 +.Lget_ipl_device_addr: + .long .Lget_ipl_device +.Lpmask: + .byte 0 +.align 8 +.Lpcext:.long 0x00080000,0x80000000 +.Lcr: + .long 0x00 # place holder for cr0 +.Lwaitsclp: + .long 0x010a0000,0x80000000 + .Lsclph +.Lrcp: + .int 0x00120001 # Read SCP forced code +.Lrcp2: + .int 0x00020001 # Read SCP code +.Lonemb: + .int 0x100000 +.Lfchunk: + +# +# find memory chunks. +# + lr %r9,%r3 # end of mem + mvc __LC_PGM_NEW_PSW(8),.Lpcmem-.LPG1(%r13) + la %r1,1 # test in increments of 128KB + sll %r1,17 + l %r3,.Lmchunk-.LPG1(%r13) # get pointer to memory_chunk array + slr %r4,%r4 # set start of chunk to zero + slr %r5,%r5 # set end of chunk to zero + slr %r6,%r6 # set access code to zero + la %r10, MEMORY_CHUNKS # number of chunks +.Lloop: + tprot 0(%r5),0 # test protection of first byte + ipm %r7 + srl %r7,28 + clr %r6,%r7 # compare cc with last access code + be .Lsame-.LPG1(%r13) + b .Lchkmem-.LPG1(%r13) +.Lsame: + ar %r5,%r1 # add 128KB to end of chunk + bno .Lloop-.LPG1(%r13) # r1 < 0x80000000 -> loop +.Lchkmem: # > 2GB or tprot got a program check + clr %r4,%r5 # chunk size > 0? + be .Lchkloop-.LPG1(%r13) + st %r4,0(%r3) # store start address of chunk + lr %r0,%r5 + slr %r0,%r4 + st %r0,4(%r3) # store size of chunk + st %r6,8(%r3) # store type of chunk + la %r3,12(%r3) + l %r4,.Lmemsize-.LPG1(%r13) # address of variable memory_size + st %r5,0(%r4) # store last end to memory size + ahi %r10,-1 # update chunk number +.Lchkloop: + lr %r6,%r7 # set access code to last cc + # we got an exception or we're starting a new + # chunk , we must check if we should + # still try to find valid memory (if we detected + # the amount of available storage), and if we + # have chunks left + xr %r0,%r0 + clr %r0,%r9 # did we detect memory? + je .Ldonemem # if not, leave + chi %r10,0 # do we have chunks left? + je .Ldonemem + alr %r5,%r1 # add 128KB to end of chunk + lr %r4,%r5 # potential new chunk + clr %r5,%r9 # should we go on? + jl .Lloop +.Ldonemem: + l %r12,.Lmflags-.LPG1(%r13) # get address of machine_flags +# +# find out if we are running under VM +# + stidp __LC_CPUID # store cpuid + tm __LC_CPUID,0xff # running under VM ? + bno .Lnovm-.LPG1(%r13) + oi 3(%r12),1 # set VM flag +.Lnovm: + lh %r0,__LC_CPUID+4 # get cpu version + chi %r0,0x7490 # running on a P/390 ? + bne .Lnop390-.LPG1(%r13) + oi 3(%r12),4 # set P/390 flag +.Lnop390: + +# +# find out if we have an IEEE fpu +# + mvc __LC_PGM_NEW_PSW(8),.Lpcfpu-.LPG1(%r13) + efpc %r0,0 # test IEEE extract fpc instruction + oi 3(%r12),2 # set IEEE fpu flag +.Lchkfpu: + +# +# find out if we have the CSP instruction +# + mvc __LC_PGM_NEW_PSW(8),.Lpccsp-.LPG1(%r13) + la %r0,0 + lr %r1,%r0 + la %r2,4 + csp %r0,%r2 # Test CSP instruction + oi 3(%r12),8 # set CSP flag +.Lchkcsp: + +# +# find out if we have the MVPG instruction +# + mvc __LC_PGM_NEW_PSW(8),.Lpcmvpg-.LPG1(%r13) + sr %r0,%r0 + la %r1,0 + la %r2,0 + mvpg %r1,%r2 # Test CSP instruction + oi 3(%r12),16 # set MVPG flag +.Lchkmvpg: + +# +# find out if we have the IDTE instruction +# + mvc __LC_PGM_NEW_PSW(8),.Lpcidte-.LPG1(%r13) + .long 0xb2b10000 # store facility list + tm 0xc8,0x08 # check bit for clearing-by-ASCE + bno .Lchkidte-.LPG1(%r13) + lhi %r1,2094 + lhi %r2,0 + .long 0xb98e2001 + oi 3(%r12),0x80 # set IDTE flag +.Lchkidte: + + lpsw .Lentry-.LPG1(13) # jump to _stext in primary-space, + # virtual and never return ... + .align 8 +.Lentry:.long 0x00080000,0x80000000 + _stext +.Lctl: .long 0x04b50002 # cr0: various things + .long 0 # cr1: primary space segment table + .long .Lduct # cr2: dispatchable unit control table + .long 0 # cr3: instruction authorization + .long 0 # cr4: instruction authorization + .long 0xffffffff # cr5: primary-aste origin + .long 0 # cr6: I/O interrupts + .long 0 # cr7: secondary space segment table + .long 0 # cr8: access registers translation + .long 0 # cr9: tracing off + .long 0 # cr10: tracing off + .long 0 # cr11: tracing off + .long 0 # cr12: tracing off + .long 0 # cr13: home space segment table + .long 0xc0000000 # cr14: machine check handling off + .long 0 # cr15: linkage stack operations +.Lpcmem:.long 0x00080000,0x80000000 + .Lchkmem +.Lpcfpu:.long 0x00080000,0x80000000 + .Lchkfpu +.Lpccsp:.long 0x00080000,0x80000000 + .Lchkcsp +.Lpcmvpg:.long 0x00080000,0x80000000 + .Lchkmvpg +.Lpcidte:.long 0x00080000,0x80000000 + .Lchkidte +.Lmemsize:.long memory_size +.Lmchunk:.long memory_chunk +.Lmflags:.long machine_flags +.Lbss_bgn: .long __bss_start +.Lbss_end: .long _end + + .org PARMAREA-64 +.Lduct: .long 0,0,0,0,0,0,0,0 + .long 0,0,0,0,0,0,0,0 + +# +# params at 10400 (setup.h) +# + .org PARMAREA + .global _pstart +_pstart: + .long 0,0 # IPL_DEVICE + .long 0,RAMDISK_ORIGIN # INITRD_START + .long 0,RAMDISK_SIZE # INITRD_SIZE + + .org COMMAND_LINE + .byte "root=/dev/ram0 ro" + .byte 0 + .org 0x11000 +.Lsccb: + .hword 0x1000 # length, one page + .byte 0x00,0x00,0x00 + .byte 0x80 # variable response bit set +.Lsccbr: + .hword 0x00 # response code +.Lscpincr1: + .hword 0x00 +.Lscpa1: + .byte 0x00 + .fill 89,1,0 +.Lscpa2: + .int 0x00 +.Lscpincr2: + .quad 0x00 + .fill 3984,1,0 + .org 0x12000 + .global _pend +_pend: + + GET_IPL_DEVICE + +#ifdef CONFIG_SHARED_KERNEL + .org 0x100000 +#endif + +# +# startup-code, running in virtual mode +# + .globl _stext +_stext: basr %r13,0 # get base +.LPG3: +# +# Setup stack +# + l %r15,.Linittu-.LPG3(%r13) + mvc __LC_CURRENT(4),__TI_task(%r15) + ahi %r15,1<<(PAGE_SHIFT+THREAD_ORDER) # init_task_union+THREAD_SIZE + st %r15,__LC_KERNEL_STACK # set end of kernel stack + ahi %r15,-96 + xc __SF_BACKCHAIN(4,%r15),__SF_BACKCHAIN(%r15) # clear backchain + +# check control registers + stctl %c0,%c15,0(%r15) + oi 2(%r15),0x40 # enable sigp emergency signal + oi 0(%r15),0x10 # switch on low address protection + lctl %c0,%c15,0(%r15) + +# + lam 0,15,.Laregs-.LPG3(%r13) # load access regs needed by uaccess + l %r14,.Lstart-.LPG3(%r13) + basr %r14,%r14 # call start_kernel +# +# We returned from start_kernel ?!? PANIK +# + basr %r13,0 + lpsw .Ldw-.(%r13) # load disabled wait psw +# + .align 8 +.Ldw: .long 0x000a0000,0x00000000 +.Linittu:.long init_thread_union +.Lstart:.long start_kernel +.Laregs:.long 0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0 diff --git a/arch/s390/kernel/head64.S b/arch/s390/kernel/head64.S index 193aafa72f5..f08c06f45d5 100644 --- a/arch/s390/kernel/head64.S +++ b/arch/s390/kernel/head64.S @@ -1,482 +1,17 @@ /* - * arch/s390/kernel/head.S + * arch/s390/kernel/head64.S * - * S390 version - * Copyright (C) 1999,2000 IBM Deutschland Entwicklung GmbH, IBM Corporation - * Author(s): Hartmut Penner (hp@de.ibm.com), - * Martin Schwidefsky (schwidefsky@de.ibm.com), - * Rob van der Heij (rvdhei@iae.nl) + * (C) Copyright IBM Corp. 1999,2005 + * + * Author(s): Hartmut Penner <hp@de.ibm.com> + * Martin Schwidefsky <schwidefsky@de.ibm.com> + * Rob van der Heij <rvdhei@iae.nl> + * Heiko Carstens <heiko.carstens@de.ibm.com> * - * There are 5 different IPL methods - * 1) load the image directly into ram at address 0 and do an PSW restart - * 2) linload will load the image from address 0x10000 to memory 0x10000 - * and start the code thru LPSW 0x0008000080010000 (VM only, deprecated) - * 3) generate the tape ipl header, store the generated image on a tape - * and ipl from it - * In case of SL tape you need to IPL 5 times to get past VOL1 etc - * 4) generate the vm reader ipl header, move the generated image to the - * VM reader (use option NOH!) and do a ipl from reader (VM only) - * 5) direct call of start by the SALIPL loader - * We use the cpuid to distinguish between VM and native ipl - * params for kernel are pushed to 0x10400 (see setup.h) - - Changes: - Okt 25 2000 <rvdheij@iae.nl> - added code to skip HDR and EOF to allow SL tape IPL (5 retries) - changed first CCW from rewind to backspace block - */ -#include <linux/config.h> -#include <asm/setup.h> -#include <asm/lowcore.h> -#include <asm/asm-offsets.h> -#include <asm/thread_info.h> -#include <asm/page.h> - -#ifndef CONFIG_IPL - .org 0 - .long 0x00080000,0x80000000+startup # Just a restart PSW -#else -#ifdef CONFIG_IPL_TAPE -#define IPL_BS 1024 - .org 0 - .long 0x00080000,0x80000000+iplstart # The first 24 bytes are loaded - .long 0x27000000,0x60000001 # by ipl to addresses 0-23. - .long 0x02000000,0x20000000+IPL_BS # (a PSW and two CCWs). - .long 0x00000000,0x00000000 # external old psw - .long 0x00000000,0x00000000 # svc old psw - .long 0x00000000,0x00000000 # program check old psw - .long 0x00000000,0x00000000 # machine check old psw - .long 0x00000000,0x00000000 # io old psw - .long 0x00000000,0x00000000 - .long 0x00000000,0x00000000 - .long 0x00000000,0x00000000 - .long 0x000a0000,0x00000058 # external new psw - .long 0x000a0000,0x00000060 # svc new psw - .long 0x000a0000,0x00000068 # program check new psw - .long 0x000a0000,0x00000070 # machine check new psw - .long 0x00080000,0x80000000+.Lioint # io new psw - - .org 0x100 -# -# subroutine for loading from tape -# Paramters: -# R1 = device number -# R2 = load address -.Lloader: - st %r14,.Lldret - la %r3,.Lorbread # r3 = address of orb - la %r5,.Lirb # r5 = address of irb - st %r2,.Lccwread+4 # initialize CCW data addresses - lctl %c6,%c6,.Lcr6 - slr %r2,%r2 -.Lldlp: - la %r6,3 # 3 retries -.Lssch: - ssch 0(%r3) # load chunk of IPL_BS bytes - bnz .Llderr -.Lw4end: - bas %r14,.Lwait4io - tm 8(%r5),0x82 # do we have a problem ? - bnz .Lrecov - slr %r7,%r7 - icm %r7,3,10(%r5) # get residual count - lcr %r7,%r7 - la %r7,IPL_BS(%r7) # IPL_BS-residual=#bytes read - ar %r2,%r7 # add to total size - tm 8(%r5),0x01 # found a tape mark ? - bnz .Ldone - l %r0,.Lccwread+4 # update CCW data addresses - ar %r0,%r7 - st %r0,.Lccwread+4 - b .Lldlp -.Ldone: - l %r14,.Lldret - br %r14 # r2 contains the total size -.Lrecov: - bas %r14,.Lsense # do the sensing - bct %r6,.Lssch # dec. retry count & branch - b .Llderr -# -# Sense subroutine -# -.Lsense: - st %r14,.Lsnsret - la %r7,.Lorbsense - ssch 0(%r7) # start sense command - bnz .Llderr - bas %r14,.Lwait4io - l %r14,.Lsnsret - tm 8(%r5),0x82 # do we have a problem ? - bnz .Llderr - br %r14 -# -# Wait for interrupt subroutine -# -.Lwait4io: - lpsw .Lwaitpsw -.Lioint: - c %r1,0xb8 # compare subchannel number - bne .Lwait4io - tsch 0(%r5) - slr %r0,%r0 - tm 8(%r5),0x82 # do we have a problem ? - bnz .Lwtexit - tm 8(%r5),0x04 # got device end ? - bz .Lwait4io -.Lwtexit: - br %r14 -.Llderr: - lpsw .Lcrash - - .align 8 -.Lorbread: - .long 0x00000000,0x0080ff00,.Lccwread - .align 8 -.Lorbsense: - .long 0x00000000,0x0080ff00,.Lccwsense - .align 8 -.Lccwread: - .long 0x02200000+IPL_BS,0x00000000 -.Lccwsense: - .long 0x04200001,0x00000000 -.Lwaitpsw: - .long 0x020a0000,0x80000000+.Lioint - -.Lirb: .long 0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0 -.Lcr6: .long 0xff000000 - .align 8 -.Lcrash:.long 0x000a0000,0x00000000 -.Lldret:.long 0 -.Lsnsret: .long 0 -#endif /* CONFIG_IPL_TAPE */ - -#ifdef CONFIG_IPL_VM -#define IPL_BS 0x730 - .org 0 - .long 0x00080000,0x80000000+iplstart # The first 24 bytes are loaded - .long 0x02000018,0x60000050 # by ipl to addresses 0-23. - .long 0x02000068,0x60000050 # (a PSW and two CCWs). - .fill 80-24,1,0x40 # bytes 24-79 are discarded !! - .long 0x020000f0,0x60000050 # The next 160 byte are loaded - .long 0x02000140,0x60000050 # to addresses 0x18-0xb7 - .long 0x02000190,0x60000050 # They form the continuation - .long 0x020001e0,0x60000050 # of the CCW program started - .long 0x02000230,0x60000050 # by ipl and load the range - .long 0x02000280,0x60000050 # 0x0f0-0x730 from the image - .long 0x020002d0,0x60000050 # to the range 0x0f0-0x730 - .long 0x02000320,0x60000050 # in memory. At the end of - .long 0x02000370,0x60000050 # the channel program the PSW - .long 0x020003c0,0x60000050 # at location 0 is loaded. - .long 0x02000410,0x60000050 # Initial processing starts - .long 0x02000460,0x60000050 # at 0xf0 = iplstart. - .long 0x020004b0,0x60000050 - .long 0x02000500,0x60000050 - .long 0x02000550,0x60000050 - .long 0x020005a0,0x60000050 - .long 0x020005f0,0x60000050 - .long 0x02000640,0x60000050 - .long 0x02000690,0x60000050 - .long 0x020006e0,0x20000050 - - .org 0xf0 -# -# subroutine for loading cards from the reader -# -.Lloader: - la %r3,.Lorb # r2 = address of orb into r2 - la %r5,.Lirb # r4 = address of irb - la %r6,.Lccws - la %r7,20 -.Linit: - st %r2,4(%r6) # initialize CCW data addresses - la %r2,0x50(%r2) - la %r6,8(%r6) - bct 7,.Linit - - lctl %c6,%c6,.Lcr6 # set IO subclass mask - slr %r2,%r2 -.Lldlp: - ssch 0(%r3) # load chunk of 1600 bytes - bnz .Llderr -.Lwait4irq: - mvc 0x78(8),.Lnewpsw # set up IO interrupt psw - lpsw .Lwaitpsw -.Lioint: - c %r1,0xb8 # compare subchannel number - bne .Lwait4irq - tsch 0(%r5) - - slr %r0,%r0 - ic %r0,8(%r5) # get device status - chi %r0,8 # channel end ? - be .Lcont - chi %r0,12 # channel end + device end ? - be .Lcont - - l %r0,4(%r5) - s %r0,8(%r3) # r0/8 = number of ccws executed - mhi %r0,10 # *10 = number of bytes in ccws - lh %r3,10(%r5) # get residual count - sr %r0,%r3 # #ccws*80-residual=#bytes read - ar %r2,%r0 - - br %r14 # r2 contains the total size - -.Lcont: - ahi %r2,0x640 # add 0x640 to total size - la %r6,.Lccws - la %r7,20 -.Lincr: - l %r0,4(%r6) # update CCW data addresses - ahi %r0,0x640 - st %r0,4(%r6) - ahi %r6,8 - bct 7,.Lincr - - b .Lldlp -.Llderr: - lpsw .Lcrash - - .align 8 -.Lorb: .long 0x00000000,0x0080ff00,.Lccws -.Lirb: .long 0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0 -.Lcr6: .long 0xff000000 -.Lloadp:.long 0,0 - .align 8 -.Lcrash:.long 0x000a0000,0x00000000 -.Lnewpsw: - .long 0x00080000,0x80000000+.Lioint -.Lwaitpsw: - .long 0x020a0000,0x80000000+.Lioint - - .align 8 -.Lccws: .rept 19 - .long 0x02600050,0x00000000 - .endr - .long 0x02200050,0x00000000 -#endif /* CONFIG_IPL_VM */ - -iplstart: - lh %r1,0xb8 # test if subchannel number - bct %r1,.Lnoload # is valid - l %r1,0xb8 # load ipl subchannel number - la %r2,IPL_BS # load start address - bas %r14,.Lloader # load rest of ipl image - larl %r12,_pstart # pointer to parameter area - st %r1,IPL_DEVICE+4-PARMAREA(%r12) # store ipl device number - -# -# load parameter file from ipl device # -.Lagain1: - l %r2,INITRD_START+4-PARMAREA(%r12)# use ramdisk location as temp - bas %r14,.Lloader # load parameter file - ltr %r2,%r2 # got anything ? - bz .Lnopf - chi %r2,895 - bnh .Lnotrunc - la %r2,895 -.Lnotrunc: - l %r4,INITRD_START+4-PARMAREA(%r12) - clc 0(3,%r4),.L_hdr # if it is HDRx - bz .Lagain1 # skip dataset header - clc 0(3,%r4),.L_eof # if it is EOFx - bz .Lagain1 # skip dateset trailer - la %r5,0(%r4,%r2) - lr %r3,%r2 -.Lidebc: - tm 0(%r5),0x80 # high order bit set ? - bo .Ldocv # yes -> convert from EBCDIC - ahi %r5,-1 - bct %r3,.Lidebc - b .Lnocv -.Ldocv: - l %r3,.Lcvtab - tr 0(256,%r4),0(%r3) # convert parameters to ascii - tr 256(256,%r4),0(%r3) - tr 512(256,%r4),0(%r3) - tr 768(122,%r4),0(%r3) -.Lnocv: la %r3,COMMAND_LINE-PARMAREA(%r12) # load adr. of command line - mvc 0(256,%r3),0(%r4) - mvc 256(256,%r3),256(%r4) - mvc 512(256,%r3),512(%r4) - mvc 768(122,%r3),768(%r4) - slr %r0,%r0 - b .Lcntlp -.Ldelspc: - ic %r0,0(%r2,%r3) - chi %r0,0x20 # is it a space ? - be .Lcntlp - ahi %r2,1 - b .Leolp -.Lcntlp: - brct %r2,.Ldelspc -.Leolp: - slr %r0,%r0 - stc %r0,0(%r2,%r3) # terminate buffer -.Lnopf: - -# -# load ramdisk from ipl device -# -.Lagain2: - l %r2,INITRD_START+4-PARMAREA(%r12)# load adr. of ramdisk - bas %r14,.Lloader # load ramdisk - st %r2,INITRD_SIZE+4-PARMAREA(%r12) # store size of ramdisk - ltr %r2,%r2 - bnz .Lrdcont - st %r2,INITRD_START+4-PARMAREA(%r12)# no ramdisk found, null it -.Lrdcont: - l %r2,INITRD_START+4-PARMAREA(%r12) - clc 0(3,%r2),.L_hdr # skip HDRx and EOFx - bz .Lagain2 - clc 0(3,%r2),.L_eof - bz .Lagain2 - -#ifdef CONFIG_IPL_VM -# -# reset files in VM reader -# - stidp __LC_CPUID # store cpuid - tm __LC_CPUID,0xff # running VM ? - bno .Lnoreset - la %r2,.Lreset - lhi %r3,26 - diag %r2,%r3,8 - la %r5,.Lirb - stsch 0(%r5) # check if irq is pending - tm 30(%r5),0x0f # by verifying if any of the - bnz .Lwaitforirq # activity or status control - tm 31(%r5),0xff # bits is set in the schib - bz .Lnoreset -.Lwaitforirq: - mvc 0x78(8),.Lrdrnewpsw # set up IO interrupt psw -.Lwaitrdrirq: - lpsw .Lrdrwaitpsw -.Lrdrint: - c %r1,0xb8 # compare subchannel number - bne .Lwaitrdrirq - la %r5,.Lirb - tsch 0(%r5) -.Lnoreset: - b .Lnoload - - .align 8 -.Lrdrnewpsw: - .long 0x00080000,0x80000000+.Lrdrint -.Lrdrwaitpsw: - .long 0x020a0000,0x80000000+.Lrdrint -#endif - -# -# everything loaded, go for it -# -.Lnoload: - l %r1,.Lstartup - br %r1 - -.Lstartup: .long startup -.Lcvtab:.long _ebcasc # ebcdic to ascii table -.Lreset:.byte 0xc3,0xc8,0xc1,0xd5,0xc7,0xc5,0x40,0xd9,0xc4,0xd9,0x40 - .byte 0xc1,0xd3,0xd3,0x40,0xd2,0xc5,0xc5,0xd7,0x40,0xd5,0xd6 - .byte 0xc8,0xd6,0xd3,0xc4 # "change rdr all keep nohold" -.L_eof: .long 0xc5d6c600 /* C'EOF' */ -.L_hdr: .long 0xc8c4d900 /* C'HDR' */ -#endif /* CONFIG_IPL */ - -# -# SALIPL loader support. Based on a patch by Rob van der Heij. -# This entry point is called directly from the SALIPL loader and -# doesn't need a builtin ipl record. -# - .org 0x800 - .globl start -start: - stm %r0,%r15,0x07b0 # store registers - basr %r12,%r0 -.base: - l %r11,.parm - l %r8,.cmd # pointer to command buffer - - ltr %r9,%r9 # do we have SALIPL parameters? - bp .sk8x8 - - mvc 0(64,%r8),0x00b0 # copy saved registers - xc 64(240-64,%r8),0(%r8) # remainder of buffer - tr 0(64,%r8),.lowcase - b .gotr -.sk8x8: - mvc 0(240,%r8),0(%r9) # copy iplparms into buffer -.gotr: - l %r10,.tbl # EBCDIC to ASCII table - tr 0(240,%r8),0(%r10) - stidp __LC_CPUID # Are we running on VM maybe - cli __LC_CPUID,0xff - bnz .test - .long 0x83300060 # diag 3,0,x'0060' - storage size - b .done -.test: - mvc 0x68(8),.pgmnw # set up pgm check handler - l %r2,.fourmeg - lr %r3,%r2 - bctr %r3,%r0 # 4M-1 -.loop: iske %r0,%r3 - ar %r3,%r2 -.pgmx: - sr %r3,%r2 - la %r3,1(%r3) -.done: - l %r1,.memsize - st %r3,4(%r1) - slr %r0,%r0 - st %r0,INITRD_SIZE+4-PARMAREA(%r11) - st %r0,INITRD_START+4-PARMAREA(%r11) - j startup # continue with startup -.tbl: .long _ebcasc # translate table -.cmd: .long COMMAND_LINE # address of command line buffer -.parm: .long PARMAREA -.fourmeg: .long 0x00400000 # 4M -.pgmnw: .long 0x00080000,.pgmx -.memsize: .long memory_size -.lowcase: - .byte 0x00,0x01,0x02,0x03,0x04,0x05,0x06,0x07 - .byte 0x08,0x09,0x0a,0x0b,0x0c,0x0d,0x0e,0x0f - .byte 0x10,0x11,0x12,0x13,0x14,0x15,0x16,0x17 - .byte 0x18,0x19,0x1a,0x1b,0x1c,0x1d,0x1e,0x1f - .byte 0x20,0x21,0x22,0x23,0x24,0x25,0x26,0x27 - .byte 0x28,0x29,0x2a,0x2b,0x2c,0x2d,0x2e,0x2f - .byte 0x30,0x31,0x32,0x33,0x34,0x35,0x36,0x37 - .byte 0x38,0x39,0x3a,0x3b,0x3c,0x3d,0x3e,0x3f - .byte 0x40,0x41,0x42,0x43,0x44,0x45,0x46,0x47 - .byte 0x48,0x49,0x4a,0x4b,0x4c,0x4d,0x4e,0x4f - .byte 0x50,0x51,0x52,0x53,0x54,0x55,0x56,0x57 - .byte 0x58,0x59,0x5a,0x5b,0x5c,0x5d,0x5e,0x5f - .byte 0x60,0x61,0x62,0x63,0x64,0x65,0x66,0x67 - .byte 0x68,0x69,0x6a,0x6b,0x6c,0x6d,0x6e,0x6f - .byte 0x70,0x71,0x72,0x73,0x74,0x75,0x76,0x77 - .byte 0x78,0x79,0x7a,0x7b,0x7c,0x7d,0x7e,0x7f - - .byte 0x80,0x81,0x82,0x83,0x84,0x85,0x86,0x87 - .byte 0x88,0x89,0x8a,0x8b,0x8c,0x8d,0x8e,0x8f - .byte 0x90,0x91,0x92,0x93,0x94,0x95,0x96,0x97 - .byte 0x98,0x99,0x9a,0x9b,0x9c,0x9d,0x9e,0x9f - .byte 0xa0,0xa1,0xa2,0xa3,0xa4,0xa5,0xa6,0xa7 - .byte 0xa8,0xa9,0xaa,0xab,0xac,0xad,0xae,0xaf - .byte 0xb0,0xb1,0xb2,0xb3,0xb4,0xb5,0xb6,0xb7 - .byte 0xb8,0xb9,0xba,0xbb,0xbc,0xbd,0xbe,0xbf - .byte 0xc0,0x81,0x82,0x83,0x84,0x85,0x86,0x87 # .abcdefg - .byte 0x88,0x89,0xca,0xcb,0xcc,0xcd,0xce,0xcf # hi - .byte 0xd0,0x91,0x92,0x93,0x94,0x95,0x96,0x97 # .jklmnop - .byte 0x98,0x99,0xda,0xdb,0xdc,0xdd,0xde,0xdf # qr - .byte 0xe0,0xe1,0xa2,0xa3,0xa4,0xa5,0xa6,0xa7 # ..stuvwx - .byte 0xa8,0xa9,0xea,0xeb,0xec,0xed,0xee,0xef # yz - .byte 0xf0,0xf1,0xf2,0xf3,0xf4,0xf5,0xf6,0xf7 - .byte 0xf8,0xf9,0xfa,0xfb,0xfc,0xfd,0xfe,0xff - -# -# startup-code at 0x10000, running in real mode +# startup-code at 0x10000, running in absolute addressing mode # this is called either by the ipl loader or directly by PSW restart # or linload or SALIPL # @@ -530,7 +65,7 @@ startup:basr %r13,0 # get base be .Lfchunk-.LPG1(%r13) # leave chi %r1,2 be .Lservicecall-.LPG1(%r13) - lpsw .Lwaitsclp-.LPG1(%r13) + lpswe .Lwaitsclp-.LPG1(%r13) .Lsclph: lh %r1,.Lsccbr-PARMAREA(%r4) chi %r1,0x10 # 0x0010 is the sucess code @@ -567,8 +102,7 @@ startup:basr %r13,0 # get base .Lcr: .quad 0x00 # place holder for cr0 .Lwaitsclp: - .long 0x020A0000 - .quad .Lsclph + .quad 0x0102000180000000,.Lsclph .Lrcp: .int 0x00120001 # Read SCP forced code .Lrcp2: @@ -751,62 +285,7 @@ _pstart: .global _pend _pend: -.Lget_ipl_device: - basr %r12,0 -.LPG2: l %r1,0xb8 # get sid - sll %r1,15 # test if subchannel is enabled - srl %r1,31 - ltr %r1,%r1 - bz 0(%r14) # subchannel disabled - l %r1,0xb8 - la %r5,.Lipl_schib-.LPG2(%r12) - stsch 0(%r5) # get schib of subchannel - bnz 0(%r14) # schib not available - tm 5(%r5),0x01 # devno valid? - bno 0(%r14) - la %r6,ipl_parameter_flags-.LPG2(%r12) - oi 3(%r6),0x01 # set flag - la %r2,ipl_devno-.LPG2(%r12) - mvc 0(2,%r2),6(%r5) # store devno - tm 4(%r5),0x80 # qdio capable device? - bno 0(%r14) - oi 3(%r6),0x02 # set flag - - # copy ipl parameters - - lhi %r0,4096 - l %r2,20(%r0) # get address of parameter list - lhi %r3,IPL_PARMBLOCK_ORIGIN - st %r3,20(%r0) - lhi %r4,1 - cr %r2,%r3 # start parameters < destination ? - jl 0f - lhi %r1,1 # copy direction is upwards - j 1f -0: lhi %r1,-1 # copy direction is downwards - ar %r2,%r0 - ar %r3,%r0 - ar %r2,%r1 - ar %r3,%r1 -1: mvc 0(1,%r3),0(%r2) # finally copy ipl parameters - ar %r3,%r1 - ar %r2,%r1 - sr %r0,%r4 - jne 1b - b 0(%r14) - - .align 4 -.Lipl_schib: - .rept 13 - .long 0 - .endr - - .globl ipl_parameter_flags -ipl_parameter_flags: - .long 0 - .globl ipl_devno -ipl_devno: - .word 0 + GET_IPL_DEVICE #ifdef CONFIG_SHARED_KERNEL .org 0x100000 diff --git a/arch/s390/kernel/time.c b/arch/s390/kernel/time.c index 9a1d95894f3..c36353e8c14 100644 --- a/arch/s390/kernel/time.c +++ b/arch/s390/kernel/time.c @@ -237,6 +237,8 @@ int sysctl_hz_timer = 1; */ static inline void stop_hz_timer(void) { + unsigned long flags; + unsigned long seq, next; __u64 timer, todval; if (sysctl_hz_timer != 0) @@ -257,7 +259,11 @@ static inline void stop_hz_timer(void) * This cpu is going really idle. Set up the clock comparator * for the next event. */ - timer = (__u64) (next_timer_interrupt() - jiffies) + jiffies_64; + next = next_timer_interrupt(); + do { + seq = read_seqbegin_irqsave(&xtime_lock, flags); + timer = (__u64)(next - jiffies) + jiffies_64; + } while (read_seqretry_irqrestore(&xtime_lock, seq, flags)); todval = -1ULL; /* Be careful about overflows. */ if (timer < (-1ULL / CLK_TICKS_PER_JIFFY)) { diff --git a/arch/s390/kernel/traps.c b/arch/s390/kernel/traps.c index 6b8703ec2ae..c5bd36fae56 100644 --- a/arch/s390/kernel/traps.c +++ b/arch/s390/kernel/traps.c @@ -57,7 +57,6 @@ int sysctl_userprocess_debug = 0; extern pgm_check_handler_t do_protection_exception; extern pgm_check_handler_t do_dat_exception; -extern pgm_check_handler_t do_pseudo_page_fault; #ifdef CONFIG_PFAULT extern int pfault_init(void); extern void pfault_fini(void); @@ -676,20 +675,6 @@ asmlinkage void kernel_stack_overflow(struct pt_regs * regs) panic("Corrupt kernel stack, can't continue."); } -#ifndef CONFIG_ARCH_S390X -static int -pagex_reboot_event(struct notifier_block *this, unsigned long event, void *ptr) -{ - if (MACHINE_IS_VM) - cpcmd("SET PAGEX OFF", NULL, 0, NULL); - return NOTIFY_DONE; -} - -static struct notifier_block pagex_reboot_notifier = { - .notifier_call = &pagex_reboot_event, -}; -#endif - /* init is done in lowcore.S and head.S */ void __init trap_init(void) @@ -717,9 +702,7 @@ void __init trap_init(void) pgm_check_table[0x11] = &do_dat_exception; pgm_check_table[0x12] = &translation_exception; pgm_check_table[0x13] = &special_op_exception; -#ifndef CONFIG_ARCH_S390X - pgm_check_table[0x14] = &do_pseudo_page_fault; -#else /* CONFIG_ARCH_S390X */ +#ifdef CONFIG_ARCH_S390X pgm_check_table[0x38] = &do_dat_exception; pgm_check_table[0x39] = &do_dat_exception; pgm_check_table[0x3A] = &do_dat_exception; @@ -731,12 +714,10 @@ void __init trap_init(void) pgm_check_table[0x40] = &do_monitor_call; if (MACHINE_IS_VM) { +#ifdef CONFIG_PFAULT /* - * First try to get pfault pseudo page faults going. - * If this isn't available turn on pagex page faults. + * Try to get pfault pseudo page faults going. */ -#ifdef CONFIG_PFAULT - /* request the 0x2603 external interrupt */ if (register_early_external_interrupt(0x2603, pfault_interrupt, &ext_int_pfault) != 0) panic("Couldn't request external interrupt 0x2603"); @@ -748,9 +729,5 @@ void __init trap_init(void) unregister_early_external_interrupt(0x2603, pfault_interrupt, &ext_int_pfault); #endif -#ifndef CONFIG_ARCH_S390X - register_reboot_notifier(&pagex_reboot_notifier); - cpcmd("SET PAGEX ON", NULL, 0, NULL); -#endif } } diff --git a/arch/s390/mm/extmem.c b/arch/s390/mm/extmem.c index c5348108ca3..506a33b51e4 100644 --- a/arch/s390/mm/extmem.c +++ b/arch/s390/mm/extmem.c @@ -234,8 +234,8 @@ query_segment_type (struct dcss_segment *seg) rc = 0; out_free: - if (qin) kfree(qin); - if (qout) kfree(qout); + kfree(qin); + kfree(qout); return rc; } @@ -394,7 +394,7 @@ __segment_load (char *name, int do_nonshared, unsigned long *addr, unsigned long segtype_string[seg->vm_segtype]); goto out; out_free: - kfree (seg); + kfree(seg); out: return rc; } @@ -505,7 +505,7 @@ segment_modify_shared (char *name, int do_nonshared) list_del(&seg->list); dcss_diag(DCSS_PURGESEG, seg->dcss_name, &dummy, &dummy); - kfree (seg); + kfree(seg); out_unlock: spin_unlock(&dcss_lock); return rc; diff --git a/arch/s390/mm/fault.c b/arch/s390/mm/fault.c index 856a971759b..64e32da7775 100644 --- a/arch/s390/mm/fault.c +++ b/arch/s390/mm/fault.c @@ -352,115 +352,6 @@ void do_dat_exception(struct pt_regs *regs, unsigned long error_code) do_exception(regs, error_code & 0xff, 0); } -#ifndef CONFIG_ARCH_S390X - -typedef struct _pseudo_wait_t { - struct _pseudo_wait_t *next; - wait_queue_head_t queue; - unsigned long address; - int resolved; -} pseudo_wait_t; - -static pseudo_wait_t *pseudo_lock_queue = NULL; -static spinlock_t pseudo_wait_spinlock; /* spinlock to protect lock queue */ - -/* - * This routine handles 'pagex' pseudo page faults. - */ -asmlinkage void -do_pseudo_page_fault(struct pt_regs *regs, unsigned long error_code) -{ - pseudo_wait_t wait_struct; - pseudo_wait_t *ptr, *last, *next; - unsigned long address; - - /* - * get the failing address - * more specific the segment and page table portion of - * the address - */ - address = S390_lowcore.trans_exc_code & 0xfffff000; - - if (address & 0x80000000) { - /* high bit set -> a page has been swapped in by VM */ - address &= 0x7fffffff; - spin_lock(&pseudo_wait_spinlock); - last = NULL; - ptr = pseudo_lock_queue; - while (ptr != NULL) { - next = ptr->next; - if (address == ptr->address) { - /* - * This is one of the processes waiting - * for the page. Unchain from the queue. - * There can be more than one process - * waiting for the same page. VM presents - * an initial and a completion interrupt for - * every process that tries to access a - * page swapped out by VM. - */ - if (last == NULL) - pseudo_lock_queue = next; - else - last->next = next; - /* now wake up the process */ - ptr->resolved = 1; - wake_up(&ptr->queue); - } else - last = ptr; - ptr = next; - } - spin_unlock(&pseudo_wait_spinlock); - } else { - /* Pseudo page faults in kernel mode is a bad idea */ - if (!(regs->psw.mask & PSW_MASK_PSTATE)) { - /* - * VM presents pseudo page faults if the interrupted - * state was not disabled for interrupts. So we can - * get pseudo page fault interrupts while running - * in kernel mode. We simply access the page here - * while we are running disabled. VM will then swap - * in the page synchronously. - */ - if (check_user_space(regs, error_code) == 0) - /* dereference a virtual kernel address */ - __asm__ __volatile__ ( - " ic 0,0(%0)" - : : "a" (address) : "0"); - else - /* dereference a virtual user address */ - __asm__ __volatile__ ( - " la 2,0(%0)\n" - " sacf 512\n" - " ic 2,0(2)\n" - "0:sacf 0\n" - ".section __ex_table,\"a\"\n" - " .align 4\n" - " .long 0b,0b\n" - ".previous" - : : "a" (address) : "2" ); - - return; - } - /* initialize and add element to pseudo_lock_queue */ - init_waitqueue_head (&wait_struct.queue); - wait_struct.address = address; - wait_struct.resolved = 0; - spin_lock(&pseudo_wait_spinlock); - wait_struct.next = pseudo_lock_queue; - pseudo_lock_queue = &wait_struct; - spin_unlock(&pseudo_wait_spinlock); - /* - * The instruction that caused the program check will - * be repeated. Don't signal single step via SIGTRAP. - */ - clear_tsk_thread_flag(current, TIF_SINGLE_STEP); - /* go to sleep */ - wait_event(wait_struct.queue, wait_struct.resolved); - } -} -#endif /* CONFIG_ARCH_S390X */ - #ifdef CONFIG_PFAULT /* * 'pfault' pseudo page faults routines. @@ -508,7 +399,7 @@ int pfault_init(void) " .quad 0b,1b\n" #endif /* CONFIG_ARCH_S390X */ ".previous" - : "=d" (rc) : "a" (&refbk) : "cc" ); + : "=d" (rc) : "a" (&refbk), "m" (refbk) : "cc" ); __ctl_set_bit(0, 9); return rc; } @@ -532,7 +423,7 @@ void pfault_fini(void) " .quad 0b,0b\n" #endif /* CONFIG_ARCH_S390X */ ".previous" - : : "a" (&refbk) : "cc" ); + : : "a" (&refbk), "m" (refbk) : "cc" ); } asmlinkage void diff --git a/arch/sh/Kconfig b/arch/sh/Kconfig index 3e804c736e6..64f5ae0ff96 100644 --- a/arch/sh/Kconfig +++ b/arch/sh/Kconfig @@ -490,16 +490,6 @@ config CPU_SUBTYPE_ST40 depends on CPU_SUBTYPE_ST40STB1 || CPU_SUBTYPE_ST40GX1 default y -config ARCH_DISCONTIGMEM_ENABLE - bool - depends on SH_HP690 - default y - help - Say Y to upport efficient handling of discontiguous physical memory, - for architectures which are either NUMA (Non-Uniform Memory Access) - or have huge holes in the physical address space for other reasons. - See <file:Documentation/vm/numa> for more. - source "mm/Kconfig" config ZERO_PAGE_OFFSET @@ -770,24 +760,6 @@ source "fs/Kconfig.binfmt" endmenu -menu "SH initrd options" - depends on BLK_DEV_INITRD - -config EMBEDDED_RAMDISK - bool "Embed root filesystem ramdisk into the kernel" - -config EMBEDDED_RAMDISK_IMAGE - string "Filename of gziped ramdisk image" - depends on EMBEDDED_RAMDISK - default "ramdisk.gz" - help - This is the filename of the ramdisk image to be built into the - kernel. Relative pathnames are relative to arch/sh/ramdisk/. - The ramdisk image is not part of the kernel distribution; you must - provide one yourself. - -endmenu - source "net/Kconfig" source "drivers/Kconfig" diff --git a/arch/sh/Makefile b/arch/sh/Makefile index 4a3049080b4..67192d6b00d 100644 --- a/arch/sh/Makefile +++ b/arch/sh/Makefile @@ -60,14 +60,6 @@ LIBGCC := $(shell $(CC) $(CFLAGS) -print-libgcc-file-name) core-y += arch/sh/kernel/ arch/sh/mm/ -# -# ramdisk/initrd support -# You need a compressed ramdisk image, named -# CONFIG_EMBEDDED_RAMDISK_IMAGE. Relative pathnames -# are relative to arch/sh/ramdisk/. -# -core-$(CONFIG_EMBEDDED_RAMDISK) += arch/sh/ramdisk/ - # Boards machdir-$(CONFIG_SH_SOLUTION_ENGINE) := se/770x machdir-$(CONFIG_SH_7751_SOLUTION_ENGINE) := se/7751 diff --git a/arch/sh/drivers/Makefile b/arch/sh/drivers/Makefile index bd6726cde39..338c3729d27 100644 --- a/arch/sh/drivers/Makefile +++ b/arch/sh/drivers/Makefile @@ -2,6 +2,7 @@ # Makefile for the Linux SuperH-specific device drivers. # -obj-$(CONFIG_PCI) += pci/ -obj-$(CONFIG_SH_DMA) += dma/ +obj-$(CONFIG_PCI) += pci/ +obj-$(CONFIG_SH_DMA) += dma/ +obj-$(CONFIG_SUPERHYWAY) += superhyway/ diff --git a/arch/sh/drivers/superhyway/Makefile b/arch/sh/drivers/superhyway/Makefile new file mode 100644 index 00000000000..5b8e0c7ca3a --- /dev/null +++ b/arch/sh/drivers/superhyway/Makefile @@ -0,0 +1,6 @@ +# +# Makefile for the SuperHyway specific kernel interface routines under Linux. +# + +obj-$(CONFIG_CPU_SUBTYPE_SH4_202) += ops-sh4-202.o + diff --git a/arch/sh/drivers/superhyway/ops-sh4-202.c b/arch/sh/drivers/superhyway/ops-sh4-202.c new file mode 100644 index 00000000000..a55c98a9052 --- /dev/null +++ b/arch/sh/drivers/superhyway/ops-sh4-202.c @@ -0,0 +1,171 @@ +/* + * arch/sh/drivers/superhyway/ops-sh4-202.c + * + * SuperHyway bus support for SH4-202 + * + * Copyright (C) 2005 Paul Mundt + * + * This file is subject to the terms and conditions of the GNU + * General Public License. See the file "COPYING" in the main + * directory of this archive for more details. + */ +#include <linux/kernel.h> +#include <linux/init.h> +#include <linux/superhyway.h> +#include <linux/string.h> +#include <asm/addrspace.h> +#include <asm/io.h> + +#define PHYS_EMI_CBLOCK P4SEGADDR(0x1ec00000) +#define PHYS_EMI_DBLOCK P4SEGADDR(0x08000000) +#define PHYS_FEMI_CBLOCK P4SEGADDR(0x1f800000) +#define PHYS_FEMI_DBLOCK P4SEGADDR(0x00000000) + +#define PHYS_EPBR_BLOCK P4SEGADDR(0x1de00000) +#define PHYS_DMAC_BLOCK P4SEGADDR(0x1fa00000) +#define PHYS_PBR_BLOCK P4SEGADDR(0x1fc00000) + +static struct resource emi_resources[] = { + [0] = { + .start = PHYS_EMI_CBLOCK, + .end = PHYS_EMI_CBLOCK + 0x00300000 - 1, + .flags = IORESOURCE_MEM, + }, + [1] = { + .start = PHYS_EMI_DBLOCK, + .end = PHYS_EMI_DBLOCK + 0x08000000 - 1, + .flags = IORESOURCE_MEM, + }, +}; + +static struct superhyway_device emi_device = { + .name = "emi", + .num_resources = ARRAY_SIZE(emi_resources), + .resource = emi_resources, +}; + +static struct resource femi_resources[] = { + [0] = { + .start = PHYS_FEMI_CBLOCK, + .end = PHYS_FEMI_CBLOCK + 0x00100000 - 1, + .flags = IORESOURCE_MEM, + }, + [1] = { + .start = PHYS_FEMI_DBLOCK, + .end = PHYS_FEMI_DBLOCK + 0x08000000 - 1, + .flags = IORESOURCE_MEM, + }, +}; + +static struct superhyway_device femi_device = { + .name = "femi", + .num_resources = ARRAY_SIZE(femi_resources), + .resource = femi_resources, +}; + +static struct resource epbr_resources[] = { + [0] = { + .start = P4SEGADDR(0x1e7ffff8), + .end = P4SEGADDR(0x1e7ffff8 + (sizeof(u32) * 2) - 1), + .flags = IORESOURCE_MEM, + }, + [1] = { + .start = PHYS_EPBR_BLOCK, + .end = PHYS_EPBR_BLOCK + 0x00a00000 - 1, + .flags = IORESOURCE_MEM, + }, +}; + +static struct superhyway_device epbr_device = { + .name = "epbr", + .num_resources = ARRAY_SIZE(epbr_resources), + .resource = epbr_resources, +}; + +static struct resource dmac_resource = { + .start = PHYS_DMAC_BLOCK, + .end = PHYS_DMAC_BLOCK + 0x00100000 - 1, + .flags = IORESOURCE_MEM, +}; + +static struct superhyway_device dmac_device = { + .name = "dmac", + .num_resources = 1, + .resource = &dmac_resource, +}; + +static struct resource pbr_resources[] = { + [0] = { + .start = P4SEGADDR(0x1ffffff8), + .end = P4SEGADDR(0x1ffffff8 + (sizeof(u32) * 2) - 1), + .flags = IORESOURCE_MEM, + }, + [1] = { + .start = PHYS_PBR_BLOCK, + .end = PHYS_PBR_BLOCK + 0x00400000 - (sizeof(u32) * 2) - 1, + .flags = IORESOURCE_MEM, + }, +}; + +static struct superhyway_device pbr_device = { + .name = "pbr", + .num_resources = ARRAY_SIZE(pbr_resources), + .resource = pbr_resources, +}; + +static struct superhyway_device *sh4202_devices[] __initdata = { + &emi_device, &femi_device, &epbr_device, &dmac_device, &pbr_device, +}; + +static int sh4202_read_vcr(unsigned long base, struct superhyway_vcr_info *vcr) +{ + u32 vcrh, vcrl; + u64 tmp; + + /* + * XXX: Even though the SH4-202 Evaluation Device documentation + * indicates that VCRL is mapped first with VCRH at a + 0x04 + * offset, the opposite seems to be true. + * + * Some modules (PBR and ePBR for instance) also appear to have + * VCRL/VCRH flipped in the documentation, but on the SH4-202 + * itself it appears that these are all consistently mapped with + * VCRH preceeding VCRL. + * + * Do not trust the documentation, for it is evil. + */ + vcrh = ctrl_inl(base); + vcrl = ctrl_inl(base + sizeof(u32)); + + tmp = ((u64)vcrh << 32) | vcrl; + memcpy(vcr, &tmp, sizeof(u64)); + + return 0; +} + +static int sh4202_write_vcr(unsigned long base, struct superhyway_vcr_info vcr) +{ + u64 tmp = *(u64 *)&vcr; + + ctrl_outl((tmp >> 32) & 0xffffffff, base); + ctrl_outl(tmp & 0xffffffff, base + sizeof(u32)); + + return 0; +} + +static struct superhyway_ops sh4202_superhyway_ops = { + .read_vcr = sh4202_read_vcr, + .write_vcr = sh4202_write_vcr, +}; + +struct superhyway_bus superhyway_channels[] = { + { &sh4202_superhyway_ops, }, + { 0, }, +}; + +int __init superhyway_scan_bus(struct superhyway_bus *bus) +{ + return superhyway_add_devices(bus, sh4202_devices, + ARRAY_SIZE(sh4202_devices)); +} + diff --git a/arch/sh/kernel/ptrace.c b/arch/sh/kernel/ptrace.c index 1fbe5a428e3..1a8be06519e 100644 --- a/arch/sh/kernel/ptrace.c +++ b/arch/sh/kernel/ptrace.c @@ -80,48 +80,11 @@ void ptrace_disable(struct task_struct *child) /* nothing to do.. */ } -asmlinkage long sys_ptrace(long request, long pid, long addr, long data) +long arch_ptrace(struct task_struct *child, long request, long addr, long data) { - struct task_struct *child; struct user * dummy = NULL; int ret; - lock_kernel(); - ret = -EPERM; - if (request == PTRACE_TRACEME) { - /* are we already being traced? */ - if (current->ptrace & PT_PTRACED) - goto out; - ret = security_ptrace(current->parent, current); - if (ret) - goto out; - /* set the ptrace bit in the process flags. */ - current->ptrace |= PT_PTRACED; - ret = 0; - goto out; - } - ret = -ESRCH; - read_lock(&tasklist_lock); - child = find_task_by_pid(pid); - if (child) - get_task_struct(child); - read_unlock(&tasklist_lock); - if (!child) - goto out; - - ret = -EPERM; - if (pid == 1) /* you may not mess with init */ - goto out_tsk; - - if (request == PTRACE_ATTACH) { - ret = ptrace_attach(child); - goto out_tsk; - } - - ret = ptrace_check_attach(child, request == PTRACE_KILL); - if (ret < 0) - goto out_tsk; - switch (request) { /* when I and D space are separate, these will need to be fixed. */ case PTRACE_PEEKTEXT: /* read word at location addr. */ @@ -289,10 +252,7 @@ asmlinkage long sys_ptrace(long request, long pid, long addr, long data) ret = ptrace_request(child, request, addr, data); break; } -out_tsk: - put_task_struct(child); -out: - unlock_kernel(); + return ret; } diff --git a/arch/sh/kernel/setup.c b/arch/sh/kernel/setup.c index 25b9d9ebe85..036050b377c 100644 --- a/arch/sh/kernel/setup.c +++ b/arch/sh/kernel/setup.c @@ -83,9 +83,9 @@ static struct sh_machine_vector* __init get_mv_byname(const char* name); /* ... */ #define COMMAND_LINE ((char *) (PARAM+0x100)) -#define RAMDISK_IMAGE_START_MASK 0x07FF +#define RAMDISK_IMAGE_START_MASK 0x07FF #define RAMDISK_PROMPT_FLAG 0x8000 -#define RAMDISK_LOAD_FLAG 0x4000 +#define RAMDISK_LOAD_FLAG 0x4000 static char command_line[COMMAND_LINE_SIZE] = { 0, }; @@ -284,18 +284,6 @@ void __init setup_arch(char **cmdline_p) #define PFN_DOWN(x) ((x) >> PAGE_SHIFT) #define PFN_PHYS(x) ((x) << PAGE_SHIFT) -#ifdef CONFIG_DISCONTIGMEM - NODE_DATA(0)->bdata = &discontig_node_bdata[0]; - NODE_DATA(1)->bdata = &discontig_node_bdata[1]; - - bootmap_size = init_bootmem_node(NODE_DATA(1), - PFN_UP(__MEMORY_START_2ND), - PFN_UP(__MEMORY_START_2ND), - PFN_DOWN(__MEMORY_START_2ND+__MEMORY_SIZE_2ND)); - free_bootmem_node(NODE_DATA(1), __MEMORY_START_2ND, __MEMORY_SIZE_2ND); - reserve_bootmem_node(NODE_DATA(1), __MEMORY_START_2ND, bootmap_size); -#endif - /* * Find the highest page frame number we have available */ @@ -306,10 +294,10 @@ void __init setup_arch(char **cmdline_p) */ max_low_pfn = max_pfn; - /* + /* * Partially used pages are not usable - thus * we are rounding upwards: - */ + */ start_pfn = PFN_UP(__pa(_end)); /* @@ -360,12 +348,12 @@ void __init setup_arch(char **cmdline_p) reserve_bootmem_node(NODE_DATA(0), __MEMORY_START, PAGE_SIZE); #ifdef CONFIG_BLK_DEV_INITRD - ROOT_DEV = MKDEV(RAMDISK_MAJOR, 0); - if (&__rd_start != &__rd_end) { + ROOT_DEV = MKDEV(RAMDISK_MAJOR, 0); + if (&__rd_start != &__rd_end) { LOADER_TYPE = 1; INITRD_START = PHYSADDR((unsigned long)&__rd_start) - __MEMORY_START; INITRD_SIZE = (unsigned long)&__rd_end - (unsigned long)&__rd_start; - } + } if (LOADER_TYPE && INITRD_START) { if (INITRD_START + INITRD_SIZE <= (max_low_pfn << PAGE_SHIFT)) { diff --git a/arch/sh/mm/init.c b/arch/sh/mm/init.c index 4e9c854845a..e342565f75f 100644 --- a/arch/sh/mm/init.c +++ b/arch/sh/mm/init.c @@ -51,11 +51,6 @@ unsigned long mmu_context_cache = NO_CONTEXT; #define MAX_LOW_PFN (NODE_DATA(0)->bdata->node_low_pfn) #endif -#ifdef CONFIG_DISCONTIGMEM -pg_data_t discontig_page_data[MAX_NUMNODES]; -bootmem_data_t discontig_node_bdata[MAX_NUMNODES]; -#endif - void (*copy_page)(void *from, void *to); void (*clear_page)(void *to); @@ -216,15 +211,6 @@ void __init paging_init(void) #endif NODE_DATA(0)->node_mem_map = NULL; free_area_init_node(0, NODE_DATA(0), zones_size, __MEMORY_START >> PAGE_SHIFT, 0); - -#ifdef CONFIG_DISCONTIGMEM - /* - * And for discontig, do some more fixups on the zone sizes.. - */ - zones_size[ZONE_DMA] = __MEMORY_SIZE_2ND >> PAGE_SHIFT; - zones_size[ZONE_NORMAL] = 0; - free_area_init_node(1, NODE_DATA(1), zones_size, __MEMORY_START_2ND >> PAGE_SHIFT, 0); -#endif } void __init mem_init(void) @@ -248,7 +234,7 @@ void __init mem_init(void) memset(empty_zero_page, 0, PAGE_SIZE); __flush_wback_region(empty_zero_page, PAGE_SIZE); - /* + /* * Setup wrappers for copy/clear_page(), these will get overridden * later in the boot process if a better method is available. */ @@ -257,9 +243,6 @@ void __init mem_init(void) /* this will put all low memory onto the freelists */ totalram_pages += free_all_bootmem_node(NODE_DATA(0)); -#ifdef CONFIG_DISCONTIGMEM - totalram_pages += free_all_bootmem_node(NODE_DATA(1)); -#endif reservedpages = 0; for (tmp = 0; tmp < num_physpages; tmp++) /* @@ -286,7 +269,7 @@ void __init mem_init(void) void free_initmem(void) { unsigned long addr; - + addr = (unsigned long)(&__init_begin); for (; addr < (unsigned long)(&__init_end); addr += PAGE_SIZE) { ClearPageReserved(virt_to_page(addr)); diff --git a/arch/sh/mm/tlb-sh3.c b/arch/sh/mm/tlb-sh3.c index 7a0d5c10bf2..46b09e26e08 100644 --- a/arch/sh/mm/tlb-sh3.c +++ b/arch/sh/mm/tlb-sh3.c @@ -40,12 +40,17 @@ void update_mmu_cache(struct vm_area_struct * vma, return; #if defined(CONFIG_SH7705_CACHE_32KB) - struct page *page; - page = pte_page(pte); - if (VALID_PAGE(page) && !test_bit(PG_mapped, &page->flags)) { - unsigned long phys = pte_val(pte) & PTE_PHYS_MASK; - __flush_wback_region((void *)P1SEGADDR(phys), PAGE_SIZE); - __set_bit(PG_mapped, &page->flags); + { + struct page *page = pte_page(pte); + unsigned long pfn = pte_pfn(pte); + + if (pfn_valid(pfn) && !test_bit(PG_mapped, &page->flags)) { + unsigned long phys = pte_val(pte) & PTE_PHYS_MASK; + + __flush_wback_region((void *)P1SEGADDR(phys), + PAGE_SIZE); + __set_bit(PG_mapped, &page->flags); + } } #endif @@ -80,7 +85,7 @@ void __flush_tlb_page(unsigned long asid, unsigned long page) */ addr = MMU_TLB_ADDRESS_ARRAY | (page & 0x1F000); data = (page & 0xfffe0000) | asid; /* VALID bit is off */ - + if ((cpu_data->flags & CPU_HAS_MMU_PAGE_ASSOC)) { addr |= MMU_PAGE_ASSOC_BIT; ways = 1; /* we already know the way .. */ diff --git a/arch/sh/ramdisk/Makefile b/arch/sh/ramdisk/Makefile deleted file mode 100644 index 99e1c68673c..00000000000 --- a/arch/sh/ramdisk/Makefile +++ /dev/null @@ -1,20 +0,0 @@ -# -# Makefile for a ramdisk image -# - -obj-y += ramdisk.o - - -O_FORMAT = $(shell $(OBJDUMP) -i | head -n 2 | grep elf32) -img := $(subst ",,$(CONFIG_EMBEDDED_RAMDISK_IMAGE)) -# add $(src) when $(img) is relative -img := $(subst $(src)//,/,$(src)/$(img)) - -quiet_cmd_ramdisk = LD $@ -define cmd_ramdisk - $(LD) -T $(srctree)/$(src)/ld.script -b binary --oformat $(O_FORMAT) \ - -o $@ $(img) -endef - -$(obj)/ramdisk.o: $(img) $(srctree)/$(src)/ld.script - $(call cmd,ramdisk) diff --git a/arch/sh/ramdisk/ld.script b/arch/sh/ramdisk/ld.script deleted file mode 100644 index 94beee248c0..00000000000 --- a/arch/sh/ramdisk/ld.script +++ /dev/null @@ -1,9 +0,0 @@ -OUTPUT_ARCH(sh) -SECTIONS -{ - .initrd : - { - *(.data) - } -} - diff --git a/arch/sh64/kernel/ptrace.c b/arch/sh64/kernel/ptrace.c index 71f2eec00b9..cd22e947131 100644 --- a/arch/sh64/kernel/ptrace.c +++ b/arch/sh64/kernel/ptrace.c @@ -28,6 +28,7 @@ #include <linux/ptrace.h> #include <linux/user.h> #include <linux/signal.h> +#include <linux/syscalls.h> #include <asm/io.h> #include <asm/uaccess.h> @@ -121,61 +122,11 @@ put_fpu_long(struct task_struct *task, unsigned long addr, unsigned long data) return 0; } -asmlinkage long sys_ptrace(long request, long pid, long addr, long data) + +long arch_ptrace(struct task_struct *child, long request, long addr, long data) { - struct task_struct *child; - extern void poke_real_address_q(unsigned long long addr, unsigned long long data); -#define WPC_DBRMODE 0x0d104008 - static int first_call = 1; int ret; - lock_kernel(); - - if (first_call) { - /* Set WPC.DBRMODE to 0. This makes all debug events get - * delivered through RESVEC, i.e. into the handlers in entry.S. - * (If the kernel was downloaded using a remote gdb, WPC.DBRMODE - * would normally be left set to 1, which makes debug events get - * delivered through DBRVEC, i.e. into the remote gdb's - * handlers. This prevents ptrace getting them, and confuses - * the remote gdb.) */ - printk("DBRMODE set to 0 to permit native debugging\n"); - poke_real_address_q(WPC_DBRMODE, 0); - first_call = 0; - } - - ret = -EPERM; - if (request == PTRACE_TRACEME) { - /* are we already being traced? */ - if (current->ptrace & PT_PTRACED) - goto out; - /* set the ptrace bit in the process flags. */ - current->ptrace |= PT_PTRACED; - ret = 0; - goto out; - } - ret = -ESRCH; - read_lock(&tasklist_lock); - child = find_task_by_pid(pid); - if (child) - get_task_struct(child); - read_unlock(&tasklist_lock); - if (!child) - goto out; - - ret = -EPERM; - if (pid == 1) /* you may not mess with init */ - goto out_tsk; - - if (request == PTRACE_ATTACH) { - ret = ptrace_attach(child); - goto out_tsk; - } - - ret = ptrace_check_attach(child, request == PTRACE_KILL); - if (ret < 0) - goto out_tsk; - switch (request) { /* when I and D space are separate, these will need to be fixed. */ case PTRACE_PEEKTEXT: /* read word at location addr. */ @@ -313,13 +264,33 @@ asmlinkage long sys_ptrace(long request, long pid, long addr, long data) ret = ptrace_request(child, request, addr, data); break; } -out_tsk: - put_task_struct(child); -out: - unlock_kernel(); return ret; } +asmlinkage int sh64_ptrace(long request, long pid, long addr, long data) +{ + extern void poke_real_address_q(unsigned long long addr, unsigned long long data); +#define WPC_DBRMODE 0x0d104008 + static int first_call = 1; + + lock_kernel(); + if (first_call) { + /* Set WPC.DBRMODE to 0. This makes all debug events get + * delivered through RESVEC, i.e. into the handlers in entry.S. + * (If the kernel was downloaded using a remote gdb, WPC.DBRMODE + * would normally be left set to 1, which makes debug events get + * delivered through DBRVEC, i.e. into the remote gdb's + * handlers. This prevents ptrace getting them, and confuses + * the remote gdb.) */ + printk("DBRMODE set to 0 to permit native debugging\n"); + poke_real_address_q(WPC_DBRMODE, 0); + first_call = 0; + } + unlock_kernel(); + + return sys_ptrace(request, pid, addr, data); +} + asmlinkage void syscall_trace(void) { struct task_struct *tsk = current; diff --git a/arch/sh64/kernel/syscalls.S b/arch/sh64/kernel/syscalls.S index a3d037805f1..c0079d54c85 100644 --- a/arch/sh64/kernel/syscalls.S +++ b/arch/sh64/kernel/syscalls.S @@ -46,7 +46,7 @@ sys_call_table: .long sys_setuid16 .long sys_getuid16 .long sys_stime /* 25 */ - .long sys_ptrace + .long sh64_ptrace .long sys_alarm .long sys_fstat .long sys_pause diff --git a/arch/sparc/Kconfig b/arch/sparc/Kconfig index 6537445dac0..3cfb8be3ff6 100644 --- a/arch/sparc/Kconfig +++ b/arch/sparc/Kconfig @@ -201,6 +201,14 @@ config SUN_OPENPROMFS Only choose N if you know in advance that you will not need to modify OpenPROM settings on the running system. +config SPARC_LED + tristate "Sun4m LED driver" + help + This driver toggles the front-panel LED on sun4m systems + in a user-specifyable manner. It's state can be probed + by reading /proc/led and it's blinking mode can be changed + via writes to /proc/led + source "fs/Kconfig.binfmt" config SUNOS_EMUL diff --git a/arch/sparc/kernel/Makefile b/arch/sparc/kernel/Makefile index 3d22ba2af01..1b83e21841b 100644 --- a/arch/sparc/kernel/Makefile +++ b/arch/sparc/kernel/Makefile @@ -21,6 +21,7 @@ obj-$(CONFIG_SUN_AUXIO) += auxio.o obj-$(CONFIG_PCI) += ebus.o obj-$(CONFIG_SUN_PM) += apc.o pmc.o obj-$(CONFIG_MODULES) += module.o sparc_ksyms.o +obj-$(CONFIG_SPARC_LED) += led.o ifdef CONFIG_SUNOS_EMUL obj-y += sys_sunos.o sunos_ioctl.o diff --git a/arch/sparc/kernel/led.c b/arch/sparc/kernel/led.c new file mode 100644 index 00000000000..2a3afca453c --- /dev/null +++ b/arch/sparc/kernel/led.c @@ -0,0 +1,139 @@ +#include <linux/kernel.h> +#include <linux/module.h> +#include <linux/init.h> +#include <linux/proc_fs.h> +#include <linux/string.h> + +#include <asm/auxio.h> + +#define LED_MAX_LENGTH 8 /* maximum chars written to proc file */ + +static inline void led_toggle(void) +{ + unsigned char val = get_auxio(); + unsigned char on, off; + + if (val & AUXIO_LED) { + on = 0; + off = AUXIO_LED; + } else { + on = AUXIO_LED; + off = 0; + } + + set_auxio(on, off); +} + +static struct timer_list led_blink_timer; + +static void led_blink(unsigned long timeout) +{ + led_toggle(); + + /* reschedule */ + if (!timeout) { /* blink according to load */ + led_blink_timer.expires = jiffies + + ((1 + (avenrun[0] >> FSHIFT)) * HZ); + led_blink_timer.data = 0; + } else { /* blink at user specified interval */ + led_blink_timer.expires = jiffies + (timeout * HZ); + led_blink_timer.data = timeout; + } + add_timer(&led_blink_timer); +} + +static int led_read_proc(char *buf, char **start, off_t offset, int count, + int *eof, void *data) +{ + int len = 0; + + if (get_auxio() & AUXIO_LED) + len = sprintf(buf, "on\n"); + else + len = sprintf(buf, "off\n"); + + return len; +} + +static int led_write_proc(struct file *file, const char *buffer, + unsigned long count, void *data) +{ + char *buf = NULL; + + if (count > LED_MAX_LENGTH) + count = LED_MAX_LENGTH; + + buf = kmalloc(sizeof(char) * (count + 1), GFP_KERNEL); + if (!buf) + return -ENOMEM; + + if (copy_from_user(buf, buffer, count)) { + kfree(buf); + return -EFAULT; + } + + buf[count] = '\0'; + + /* work around \n when echo'ing into proc */ + if (buf[count - 1] == '\n') + buf[count - 1] = '\0'; + + /* before we change anything we want to stop any running timers, + * otherwise calls such as on will have no persistent effect + */ + del_timer_sync(&led_blink_timer); + + if (!strcmp(buf, "on")) { + auxio_set_led(AUXIO_LED_ON); + } else if (!strcmp(buf, "toggle")) { + led_toggle(); + } else if ((*buf > '0') && (*buf <= '9')) { + led_blink(simple_strtoul(buf, NULL, 10)); + } else if (!strcmp(buf, "load")) { + led_blink(0); + } else { + auxio_set_led(AUXIO_LED_OFF); + } + + kfree(buf); + + return count; +} + +static struct proc_dir_entry *led; + +#define LED_VERSION "0.1" + +static int __init led_init(void) +{ + init_timer(&led_blink_timer); + led_blink_timer.function = led_blink; + + led = create_proc_entry("led", 0, NULL); + if (!led) + return -ENOMEM; + + led->read_proc = led_read_proc; /* reader function */ + led->write_proc = led_write_proc; /* writer function */ + led->owner = THIS_MODULE; + + printk(KERN_INFO + "led: version %s, Lars Kotthoff <metalhead@metalhead.ws>\n", + LED_VERSION); + + return 0; +} + +static void __exit led_exit(void) +{ + remove_proc_entry("led", NULL); + del_timer_sync(&led_blink_timer); +} + +module_init(led_init); +module_exit(led_exit); + +MODULE_AUTHOR("Lars Kotthoff <metalhead@metalhead.ws>"); +MODULE_DESCRIPTION("Provides control of the front LED on SPARC systems."); +MODULE_LICENSE("GPL"); +MODULE_VERSION(LED_VERSION); diff --git a/arch/sparc/kernel/sunos_ioctl.c b/arch/sparc/kernel/sunos_ioctl.c index df1c0b31a93..a6ba3d26222 100644 --- a/arch/sparc/kernel/sunos_ioctl.c +++ b/arch/sparc/kernel/sunos_ioctl.c @@ -23,7 +23,6 @@ #include <linux/smp_lock.h> #include <linux/syscalls.h> #include <linux/file.h> -#include <asm/kbio.h> #if 0 extern char sunkbd_type; diff --git a/arch/sparc64/Kconfig b/arch/sparc64/Kconfig index 1e9d8638a28..3fded69b192 100644 --- a/arch/sparc64/Kconfig +++ b/arch/sparc64/Kconfig @@ -377,8 +377,21 @@ source "drivers/fc4/Kconfig" source "fs/Kconfig" +menu "Instrumentation Support" + depends on EXPERIMENTAL + source "arch/sparc64/oprofile/Kconfig" +config KPROBES + bool "Kprobes (EXPERIMENTAL)" + help + Kprobes allows you to trap at almost any kernel address and + execute a callback function. register_kprobe() establishes + a probepoint and specifies the callback. Kprobes is useful + for kernel debugging, non-intrusive instrumentation and testing. + If in doubt, say "N". +endmenu + source "arch/sparc64/Kconfig.debug" source "security/Kconfig" diff --git a/arch/sparc64/Kconfig.debug b/arch/sparc64/Kconfig.debug index fa06ea04837..3e31be494e5 100644 --- a/arch/sparc64/Kconfig.debug +++ b/arch/sparc64/Kconfig.debug @@ -11,16 +11,6 @@ config DEBUG_STACK_USAGE This option will slow down process creation somewhat. -config KPROBES - bool "Kprobes" - depends on DEBUG_KERNEL - help - Kprobes allows you to trap at almost any kernel address and - execute a callback function. register_kprobe() establishes - a probepoint and specifies the callback. Kprobes is useful - for kernel debugging, non-intrusive instrumentation and testing. - If in doubt, say "N". - config DEBUG_DCFLUSH bool "D-cache flush debugging" depends on DEBUG_KERNEL diff --git a/arch/sparc64/kernel/ioctl32.c b/arch/sparc64/kernel/ioctl32.c index e6a00325075..92e26304de9 100644 --- a/arch/sparc64/kernel/ioctl32.c +++ b/arch/sparc64/kernel/ioctl32.c @@ -11,33 +11,14 @@ #define INCLUDES #include "compat_ioctl.c" -#include <linux/ncp_fs.h> #include <linux/syscalls.h> #include <asm/fbio.h> -#include <asm/kbio.h> -#include <asm/vuid_event.h> -#include <asm/envctrl.h> -#include <asm/display7seg.h> -#include <asm/openpromio.h> -#include <asm/audioio.h> -#include <asm/watchdog.h> /* Use this to get at 32-bit user passed pointers. * See sys_sparc32.c for description about it. */ #define A(__x) compat_ptr(__x) -static __inline__ void *alloc_user_space(long len) -{ - struct pt_regs *regs = current_thread_info()->kregs; - unsigned long usp = regs->u_regs[UREG_I6]; - - if (!(test_thread_flag(TIF_32BIT))) - usp += STACK_BIAS; - - return (void *) (usp - len); -} - #define CODE #include "compat_ioctl.c" @@ -111,357 +92,6 @@ static int fbiogscursor(unsigned int fd, unsigned int cmd, unsigned long arg) return sys_ioctl (fd, FBIOSCURSOR, (unsigned long)p); } -#if defined(CONFIG_DRM) || defined(CONFIG_DRM_MODULE) -/* This really belongs in include/linux/drm.h -DaveM */ -#include "../../../drivers/char/drm/drm.h" - -typedef struct drm32_version { - int version_major; /* Major version */ - int version_minor; /* Minor version */ - int version_patchlevel;/* Patch level */ - int name_len; /* Length of name buffer */ - u32 name; /* Name of driver */ - int date_len; /* Length of date buffer */ - u32 date; /* User-space buffer to hold date */ - int desc_len; /* Length of desc buffer */ - u32 desc; /* User-space buffer to hold desc */ -} drm32_version_t; -#define DRM32_IOCTL_VERSION DRM_IOWR(0x00, drm32_version_t) - -static int drm32_version(unsigned int fd, unsigned int cmd, unsigned long arg) -{ - drm32_version_t __user *uversion = (drm32_version_t __user *)arg; - drm_version_t __user *p = compat_alloc_user_space(sizeof(*p)); - compat_uptr_t addr; - int n; - int ret; - - if (clear_user(p, 3 * sizeof(int)) || - get_user(n, &uversion->name_len) || - put_user(n, &p->name_len) || - get_user(addr, &uversion->name) || - put_user(compat_ptr(addr), &p->name) || - get_user(n, &uversion->date_len) || - put_user(n, &p->date_len) || - get_user(addr, &uversion->date) || - put_user(compat_ptr(addr), &p->date) || - get_user(n, &uversion->desc_len) || - put_user(n, &p->desc_len) || - get_user(addr, &uversion->desc) || - put_user(compat_ptr(addr), &p->desc)) - return -EFAULT; - - ret = sys_ioctl(fd, DRM_IOCTL_VERSION, (unsigned long)p); - if (ret) - return ret; - - if (copy_in_user(uversion, p, 3 * sizeof(int)) || - get_user(n, &p->name_len) || - put_user(n, &uversion->name_len) || - get_user(n, &p->date_len) || - put_user(n, &uversion->date_len) || - get_user(n, &p->desc_len) || - put_user(n, &uversion->desc_len)) - return -EFAULT; - - return 0; -} - -typedef struct drm32_unique { - int unique_len; /* Length of unique */ - u32 unique; /* Unique name for driver instantiation */ -} drm32_unique_t; -#define DRM32_IOCTL_GET_UNIQUE DRM_IOWR(0x01, drm32_unique_t) -#define DRM32_IOCTL_SET_UNIQUE DRM_IOW( 0x10, drm32_unique_t) - -static int drm32_getsetunique(unsigned int fd, unsigned int cmd, unsigned long arg) -{ - drm32_unique_t __user *uarg = (drm32_unique_t __user *)arg; - drm_unique_t __user *p = compat_alloc_user_space(sizeof(*p)); - compat_uptr_t addr; - int n; - int ret; - - if (get_user(n, &uarg->unique_len) || - put_user(n, &p->unique_len) || - get_user(addr, &uarg->unique) || - put_user(compat_ptr(addr), &p->unique)) - return -EFAULT; - - if (cmd == DRM32_IOCTL_GET_UNIQUE) - ret = sys_ioctl (fd, DRM_IOCTL_GET_UNIQUE, (unsigned long)p); - else - ret = sys_ioctl (fd, DRM_IOCTL_SET_UNIQUE, (unsigned long)p); - - if (ret) - return ret; - - if (get_user(n, &p->unique_len) || put_user(n, &uarg->unique_len)) - return -EFAULT; - - return 0; -} - -typedef struct drm32_map { - u32 offset; /* Requested physical address (0 for SAREA)*/ - u32 size; /* Requested physical size (bytes) */ - drm_map_type_t type; /* Type of memory to map */ - drm_map_flags_t flags; /* Flags */ - u32 handle; /* User-space: "Handle" to pass to mmap */ - /* Kernel-space: kernel-virtual address */ - int mtrr; /* MTRR slot used */ - /* Private data */ -} drm32_map_t; -#define DRM32_IOCTL_ADD_MAP DRM_IOWR(0x15, drm32_map_t) - -static int drm32_addmap(unsigned int fd, unsigned int cmd, unsigned long arg) -{ - drm32_map_t __user *uarg = (drm32_map_t __user *) arg; - drm_map_t karg; - mm_segment_t old_fs; - u32 tmp; - int ret; - - ret = get_user(karg.offset, &uarg->offset); - ret |= get_user(karg.size, &uarg->size); - ret |= get_user(karg.type, &uarg->type); - ret |= get_user(karg.flags, &uarg->flags); - ret |= get_user(tmp, &uarg->handle); - ret |= get_user(karg.mtrr, &uarg->mtrr); - if (ret) - return -EFAULT; - - karg.handle = (void *) (unsigned long) tmp; - - old_fs = get_fs(); - set_fs(KERNEL_DS); - ret = sys_ioctl(fd, DRM_IOCTL_ADD_MAP, (unsigned long) &karg); - set_fs(old_fs); - - if (!ret) { - ret = put_user(karg.offset, &uarg->offset); - ret |= put_user(karg.size, &uarg->size); - ret |= put_user(karg.type, &uarg->type); - ret |= put_user(karg.flags, &uarg->flags); - tmp = (u32) (long)karg.handle; - ret |= put_user(tmp, &uarg->handle); - ret |= put_user(karg.mtrr, &uarg->mtrr); - if (ret) - ret = -EFAULT; - } - - return ret; -} - -typedef struct drm32_buf_info { - int count; /* Entries in list */ - u32 list; /* (drm_buf_desc_t *) */ -} drm32_buf_info_t; -#define DRM32_IOCTL_INFO_BUFS DRM_IOWR(0x18, drm32_buf_info_t) - -static int drm32_info_bufs(unsigned int fd, unsigned int cmd, unsigned long arg) -{ - drm32_buf_info_t __user *uarg = (drm32_buf_info_t __user *)arg; - drm_buf_info_t __user *p = compat_alloc_user_space(sizeof(*p)); - compat_uptr_t addr; - int n; - int ret; - - if (get_user(n, &uarg->count) || put_user(n, &p->count) || - get_user(addr, &uarg->list) || put_user(compat_ptr(addr), &p->list)) - return -EFAULT; - - ret = sys_ioctl(fd, DRM_IOCTL_INFO_BUFS, (unsigned long)p); - if (ret) - return ret; - - if (get_user(n, &p->count) || put_user(n, &uarg->count)) - return -EFAULT; - - return 0; -} - -typedef struct drm32_buf_free { - int count; - u32 list; /* (int *) */ -} drm32_buf_free_t; -#define DRM32_IOCTL_FREE_BUFS DRM_IOW( 0x1a, drm32_buf_free_t) - -static int drm32_free_bufs(unsigned int fd, unsigned int cmd, unsigned long arg) -{ - drm32_buf_free_t __user *uarg = (drm32_buf_free_t __user *)arg; - drm_buf_free_t __user *p = compat_alloc_user_space(sizeof(*p)); - compat_uptr_t addr; - int n; - - if (get_user(n, &uarg->count) || put_user(n, &p->count) || - get_user(addr, &uarg->list) || put_user(compat_ptr(addr), &p->list)) - return -EFAULT; - - return sys_ioctl(fd, DRM_IOCTL_FREE_BUFS, (unsigned long)p); -} - -typedef struct drm32_buf_pub { - int idx; /* Index into master buflist */ - int total; /* Buffer size */ - int used; /* Amount of buffer in use (for DMA) */ - u32 address; /* Address of buffer (void *) */ -} drm32_buf_pub_t; - -typedef struct drm32_buf_map { - int count; /* Length of buflist */ - u32 virtual; /* Mmaped area in user-virtual (void *) */ - u32 list; /* Buffer information (drm_buf_pub_t *) */ -} drm32_buf_map_t; -#define DRM32_IOCTL_MAP_BUFS DRM_IOWR(0x19, drm32_buf_map_t) - -static int drm32_map_bufs(unsigned int fd, unsigned int cmd, unsigned long arg) -{ - drm32_buf_map_t __user *uarg = (drm32_buf_map_t __user *)arg; - drm32_buf_pub_t __user *ulist; - drm_buf_map_t __user *arg64; - drm_buf_pub_t __user *list; - int orig_count, ret, i; - int n; - compat_uptr_t addr; - - if (get_user(orig_count, &uarg->count)) - return -EFAULT; - - arg64 = compat_alloc_user_space(sizeof(drm_buf_map_t) + - (size_t)orig_count * sizeof(drm_buf_pub_t)); - list = (void __user *)(arg64 + 1); - - if (put_user(orig_count, &arg64->count) || - put_user(list, &arg64->list) || - get_user(addr, &uarg->virtual) || - put_user(compat_ptr(addr), &arg64->virtual) || - get_user(addr, &uarg->list)) - return -EFAULT; - - ulist = compat_ptr(addr); - - for (i = 0; i < orig_count; i++) { - if (get_user(n, &ulist[i].idx) || - put_user(n, &list[i].idx) || - get_user(n, &ulist[i].total) || - put_user(n, &list[i].total) || - get_user(n, &ulist[i].used) || - put_user(n, &list[i].used) || - get_user(addr, &ulist[i].address) || - put_user(compat_ptr(addr), &list[i].address)) - return -EFAULT; - } - - ret = sys_ioctl(fd, DRM_IOCTL_MAP_BUFS, (unsigned long) arg64); - if (ret) - return ret; - - for (i = 0; i < orig_count; i++) { - void __user *p; - if (get_user(n, &list[i].idx) || - put_user(n, &ulist[i].idx) || - get_user(n, &list[i].total) || - put_user(n, &ulist[i].total) || - get_user(n, &list[i].used) || - put_user(n, &ulist[i].used) || - get_user(p, &list[i].address) || - put_user((unsigned long)p, &ulist[i].address)) - return -EFAULT; - } - - if (get_user(n, &arg64->count) || put_user(n, &uarg->count)) - return -EFAULT; - - return 0; -} - -typedef struct drm32_dma { - /* Indices here refer to the offset into - buflist in drm_buf_get_t. */ - int context; /* Context handle */ - int send_count; /* Number of buffers to send */ - u32 send_indices; /* List of handles to buffers (int *) */ - u32 send_sizes; /* Lengths of data to send (int *) */ - drm_dma_flags_t flags; /* Flags */ - int request_count; /* Number of buffers requested */ - int request_size; /* Desired size for buffers */ - u32 request_indices; /* Buffer information (int *) */ - u32 request_sizes; /* (int *) */ - int granted_count; /* Number of buffers granted */ -} drm32_dma_t; -#define DRM32_IOCTL_DMA DRM_IOWR(0x29, drm32_dma_t) - -/* RED PEN The DRM layer blindly dereferences the send/request - * index/size arrays even though they are userland - * pointers. -DaveM - */ -static int drm32_dma(unsigned int fd, unsigned int cmd, unsigned long arg) -{ - drm32_dma_t __user *uarg = (drm32_dma_t __user *) arg; - drm_dma_t __user *p = compat_alloc_user_space(sizeof(*p)); - compat_uptr_t addr; - int ret; - - if (copy_in_user(p, uarg, 2 * sizeof(int)) || - get_user(addr, &uarg->send_indices) || - put_user(compat_ptr(addr), &p->send_indices) || - get_user(addr, &uarg->send_sizes) || - put_user(compat_ptr(addr), &p->send_sizes) || - copy_in_user(&p->flags, &uarg->flags, sizeof(drm_dma_flags_t)) || - copy_in_user(&p->request_count, &uarg->request_count, sizeof(int))|| - copy_in_user(&p->request_size, &uarg->request_size, sizeof(int)) || - get_user(addr, &uarg->request_indices) || - put_user(compat_ptr(addr), &p->request_indices) || - get_user(addr, &uarg->request_sizes) || - put_user(compat_ptr(addr), &p->request_sizes) || - copy_in_user(&p->granted_count, &uarg->granted_count, sizeof(int))) - return -EFAULT; - - ret = sys_ioctl(fd, DRM_IOCTL_DMA, (unsigned long)p); - if (ret) - return ret; - - if (copy_in_user(uarg, p, 2 * sizeof(int)) || - copy_in_user(&uarg->flags, &p->flags, sizeof(drm_dma_flags_t)) || - copy_in_user(&uarg->request_count, &p->request_count, sizeof(int))|| - copy_in_user(&uarg->request_size, &p->request_size, sizeof(int)) || - copy_in_user(&uarg->granted_count, &p->granted_count, sizeof(int))) - return -EFAULT; - - return 0; -} - -typedef struct drm32_ctx_res { - int count; - u32 contexts; /* (drm_ctx_t *) */ -} drm32_ctx_res_t; -#define DRM32_IOCTL_RES_CTX DRM_IOWR(0x26, drm32_ctx_res_t) - -static int drm32_res_ctx(unsigned int fd, unsigned int cmd, unsigned long arg) -{ - drm32_ctx_res_t __user *uarg = (drm32_ctx_res_t __user *) arg; - drm_ctx_res_t __user *p = compat_alloc_user_space(sizeof(*p)); - compat_uptr_t addr; - int ret; - - if (copy_in_user(p, uarg, sizeof(int)) || - get_user(addr, &uarg->contexts) || - put_user(compat_ptr(addr), &p->contexts)) - return -EFAULT; - - ret = sys_ioctl(fd, DRM_IOCTL_RES_CTX, (unsigned long)p); - if (ret) - return ret; - - if (copy_in_user(uarg, p, sizeof(int))) - return -EFAULT; - - return 0; -} - -#endif - typedef int (* ioctl32_handler_t)(unsigned int, unsigned int, unsigned long, struct file *); #define COMPATIBLE_IOCTL(cmd) HANDLE_IOCTL((cmd),sys_ioctl) @@ -485,103 +115,14 @@ COMPATIBLE_IOCTL(FBIOSCURPOS) COMPATIBLE_IOCTL(FBIOGCURPOS) COMPATIBLE_IOCTL(FBIOGCURMAX) /* Little k */ -COMPATIBLE_IOCTL(KIOCTYPE) -COMPATIBLE_IOCTL(KIOCLAYOUT) -COMPATIBLE_IOCTL(KIOCGTRANS) -COMPATIBLE_IOCTL(KIOCTRANS) -COMPATIBLE_IOCTL(KIOCCMD) -COMPATIBLE_IOCTL(KIOCSDIRECT) -COMPATIBLE_IOCTL(KIOCSLED) -COMPATIBLE_IOCTL(KIOCGLED) -COMPATIBLE_IOCTL(KIOCSRATE) -COMPATIBLE_IOCTL(KIOCGRATE) -COMPATIBLE_IOCTL(VUIDSFORMAT) -COMPATIBLE_IOCTL(VUIDGFORMAT) /* Little v, the video4linux ioctls */ COMPATIBLE_IOCTL(_IOR('p', 20, int[7])) /* RTCGET */ COMPATIBLE_IOCTL(_IOW('p', 21, int[7])) /* RTCSET */ -COMPATIBLE_IOCTL(ENVCTRL_RD_WARNING_TEMPERATURE) -COMPATIBLE_IOCTL(ENVCTRL_RD_SHUTDOWN_TEMPERATURE) -COMPATIBLE_IOCTL(ENVCTRL_RD_CPU_TEMPERATURE) -COMPATIBLE_IOCTL(ENVCTRL_RD_FAN_STATUS) -COMPATIBLE_IOCTL(ENVCTRL_RD_VOLTAGE_STATUS) -COMPATIBLE_IOCTL(ENVCTRL_RD_SCSI_TEMPERATURE) -COMPATIBLE_IOCTL(ENVCTRL_RD_ETHERNET_TEMPERATURE) -COMPATIBLE_IOCTL(ENVCTRL_RD_MTHRBD_TEMPERATURE) -COMPATIBLE_IOCTL(ENVCTRL_RD_CPU_VOLTAGE) -COMPATIBLE_IOCTL(ENVCTRL_RD_GLOBALADDRESS) -/* COMPATIBLE_IOCTL(D7SIOCRD) same value as ENVCTRL_RD_VOLTAGE_STATUS */ -COMPATIBLE_IOCTL(D7SIOCWR) -COMPATIBLE_IOCTL(D7SIOCTM) -/* OPENPROMIO, SunOS/Solaris only, the NetBSD one's have - * embedded pointers in the arg which we'd need to clean up... - */ -COMPATIBLE_IOCTL(OPROMGETOPT) -COMPATIBLE_IOCTL(OPROMSETOPT) -COMPATIBLE_IOCTL(OPROMNXTOPT) -COMPATIBLE_IOCTL(OPROMSETOPT2) -COMPATIBLE_IOCTL(OPROMNEXT) -COMPATIBLE_IOCTL(OPROMCHILD) -COMPATIBLE_IOCTL(OPROMGETPROP) -COMPATIBLE_IOCTL(OPROMNXTPROP) -COMPATIBLE_IOCTL(OPROMU2P) -COMPATIBLE_IOCTL(OPROMGETCONS) -COMPATIBLE_IOCTL(OPROMGETFBNAME) -COMPATIBLE_IOCTL(OPROMGETBOOTARGS) -COMPATIBLE_IOCTL(OPROMSETCUR) -COMPATIBLE_IOCTL(OPROMPCI2NODE) -COMPATIBLE_IOCTL(OPROMPATH2NODE) -/* Big L */ -COMPATIBLE_IOCTL(LOOP_SET_STATUS64) -COMPATIBLE_IOCTL(LOOP_GET_STATUS64) -/* Big A */ -COMPATIBLE_IOCTL(AUDIO_GETINFO) -COMPATIBLE_IOCTL(AUDIO_SETINFO) -COMPATIBLE_IOCTL(AUDIO_DRAIN) -COMPATIBLE_IOCTL(AUDIO_GETDEV) -COMPATIBLE_IOCTL(AUDIO_GETDEV_SUNOS) -COMPATIBLE_IOCTL(AUDIO_FLUSH) -COMPATIBLE_IOCTL(AUTOFS_IOC_EXPIRE_MULTI) -#if defined(CONFIG_DRM) || defined(CONFIG_DRM_MODULE) -COMPATIBLE_IOCTL(DRM_IOCTL_GET_MAGIC) -COMPATIBLE_IOCTL(DRM_IOCTL_IRQ_BUSID) -COMPATIBLE_IOCTL(DRM_IOCTL_AUTH_MAGIC) -COMPATIBLE_IOCTL(DRM_IOCTL_BLOCK) -COMPATIBLE_IOCTL(DRM_IOCTL_UNBLOCK) -COMPATIBLE_IOCTL(DRM_IOCTL_CONTROL) -COMPATIBLE_IOCTL(DRM_IOCTL_ADD_BUFS) -COMPATIBLE_IOCTL(DRM_IOCTL_MARK_BUFS) -COMPATIBLE_IOCTL(DRM_IOCTL_ADD_CTX) -COMPATIBLE_IOCTL(DRM_IOCTL_RM_CTX) -COMPATIBLE_IOCTL(DRM_IOCTL_MOD_CTX) -COMPATIBLE_IOCTL(DRM_IOCTL_GET_CTX) -COMPATIBLE_IOCTL(DRM_IOCTL_SWITCH_CTX) -COMPATIBLE_IOCTL(DRM_IOCTL_NEW_CTX) -COMPATIBLE_IOCTL(DRM_IOCTL_ADD_DRAW) -COMPATIBLE_IOCTL(DRM_IOCTL_RM_DRAW) -COMPATIBLE_IOCTL(DRM_IOCTL_LOCK) -COMPATIBLE_IOCTL(DRM_IOCTL_UNLOCK) -COMPATIBLE_IOCTL(DRM_IOCTL_FINISH) -#endif /* DRM */ -COMPATIBLE_IOCTL(WIOCSTART) -COMPATIBLE_IOCTL(WIOCSTOP) -COMPATIBLE_IOCTL(WIOCGSTAT) /* And these ioctls need translation */ /* Note SIOCRTMSG is no longer, so this is safe and * the user would have seen just an -EINVAL anyways. */ HANDLE_IOCTL(FBIOPUTCMAP32, fbiogetputcmap) HANDLE_IOCTL(FBIOGETCMAP32, fbiogetputcmap) HANDLE_IOCTL(FBIOSCURSOR32, fbiogscursor) -#if defined(CONFIG_DRM) || defined(CONFIG_DRM_MODULE) -HANDLE_IOCTL(DRM32_IOCTL_VERSION, drm32_version) -HANDLE_IOCTL(DRM32_IOCTL_GET_UNIQUE, drm32_getsetunique) -HANDLE_IOCTL(DRM32_IOCTL_SET_UNIQUE, drm32_getsetunique) -HANDLE_IOCTL(DRM32_IOCTL_ADD_MAP, drm32_addmap) -HANDLE_IOCTL(DRM32_IOCTL_INFO_BUFS, drm32_info_bufs) -HANDLE_IOCTL(DRM32_IOCTL_FREE_BUFS, drm32_free_bufs) -HANDLE_IOCTL(DRM32_IOCTL_MAP_BUFS, drm32_map_bufs) -HANDLE_IOCTL(DRM32_IOCTL_DMA, drm32_dma) -HANDLE_IOCTL(DRM32_IOCTL_RES_CTX, drm32_res_ctx) -#endif /* DRM */ #if 0 HANDLE_IOCTL(RTC32_IRQP_READ, do_rtc_ioctl) HANDLE_IOCTL(RTC32_IRQP_SET, do_rtc_ioctl) diff --git a/arch/sparc64/kernel/kprobes.c b/arch/sparc64/kernel/kprobes.c index 0d66d07c8c6..96bd09b098f 100644 --- a/arch/sparc64/kernel/kprobes.c +++ b/arch/sparc64/kernel/kprobes.c @@ -38,6 +38,9 @@ * - Mark that we are no longer actively in a kprobe. */ +DEFINE_PER_CPU(struct kprobe *, current_kprobe) = NULL; +DEFINE_PER_CPU(struct kprobe_ctlblk, kprobe_ctlblk); + int __kprobes arch_prepare_kprobe(struct kprobe *p) { return 0; @@ -66,46 +69,39 @@ void __kprobes arch_remove_kprobe(struct kprobe *p) { } -static struct kprobe *current_kprobe; -static unsigned long current_kprobe_orig_tnpc; -static unsigned long current_kprobe_orig_tstate_pil; -static unsigned int kprobe_status; -static struct kprobe *kprobe_prev; -static unsigned long kprobe_orig_tnpc_prev; -static unsigned long kprobe_orig_tstate_pil_prev; -static unsigned int kprobe_status_prev; - -static inline void save_previous_kprobe(void) +static inline void save_previous_kprobe(struct kprobe_ctlblk *kcb) { - kprobe_status_prev = kprobe_status; - kprobe_orig_tnpc_prev = current_kprobe_orig_tnpc; - kprobe_orig_tstate_pil_prev = current_kprobe_orig_tstate_pil; - kprobe_prev = current_kprobe; + kcb->prev_kprobe.kp = kprobe_running(); + kcb->prev_kprobe.status = kcb->kprobe_status; + kcb->prev_kprobe.orig_tnpc = kcb->kprobe_orig_tnpc; + kcb->prev_kprobe.orig_tstate_pil = kcb->kprobe_orig_tstate_pil; } -static inline void restore_previous_kprobe(void) +static inline void restore_previous_kprobe(struct kprobe_ctlblk *kcb) { - kprobe_status = kprobe_status_prev; - current_kprobe_orig_tnpc = kprobe_orig_tnpc_prev; - current_kprobe_orig_tstate_pil = kprobe_orig_tstate_pil_prev; - current_kprobe = kprobe_prev; + __get_cpu_var(current_kprobe) = kcb->prev_kprobe.kp; + kcb->kprobe_status = kcb->prev_kprobe.status; + kcb->kprobe_orig_tnpc = kcb->prev_kprobe.orig_tnpc; + kcb->kprobe_orig_tstate_pil = kcb->prev_kprobe.orig_tstate_pil; } -static inline void set_current_kprobe(struct kprobe *p, struct pt_regs *regs) +static inline void set_current_kprobe(struct kprobe *p, struct pt_regs *regs, + struct kprobe_ctlblk *kcb) { - current_kprobe_orig_tnpc = regs->tnpc; - current_kprobe_orig_tstate_pil = (regs->tstate & TSTATE_PIL); - current_kprobe = p; + __get_cpu_var(current_kprobe) = p; + kcb->kprobe_orig_tnpc = regs->tnpc; + kcb->kprobe_orig_tstate_pil = (regs->tstate & TSTATE_PIL); } -static inline void prepare_singlestep(struct kprobe *p, struct pt_regs *regs) +static inline void prepare_singlestep(struct kprobe *p, struct pt_regs *regs, + struct kprobe_ctlblk *kcb) { regs->tstate |= TSTATE_PIL; /*single step inline, if it a breakpoint instruction*/ if (p->opcode == BREAKPOINT_INSTRUCTION) { regs->tpc = (unsigned long) p->addr; - regs->tnpc = current_kprobe_orig_tnpc; + regs->tnpc = kcb->kprobe_orig_tnpc; } else { regs->tpc = (unsigned long) &p->ainsn.insn[0]; regs->tnpc = (unsigned long) &p->ainsn.insn[1]; @@ -117,19 +113,21 @@ static int __kprobes kprobe_handler(struct pt_regs *regs) struct kprobe *p; void *addr = (void *) regs->tpc; int ret = 0; + struct kprobe_ctlblk *kcb; + /* + * We don't want to be preempted for the entire + * duration of kprobe processing + */ preempt_disable(); + kcb = get_kprobe_ctlblk(); if (kprobe_running()) { - /* We *are* holding lock here, so this is safe. - * Disarm the probe we just hit, and ignore it. - */ p = get_kprobe(addr); if (p) { - if (kprobe_status == KPROBE_HIT_SS) { + if (kcb->kprobe_status == KPROBE_HIT_SS) { regs->tstate = ((regs->tstate & ~TSTATE_PIL) | - current_kprobe_orig_tstate_pil); - unlock_kprobes(); + kcb->kprobe_orig_tstate_pil); goto no_kprobe; } /* We have reentered the kprobe_handler(), since @@ -138,25 +136,22 @@ static int __kprobes kprobe_handler(struct pt_regs *regs) * just single step on the instruction of the new probe * without calling any user handlers. */ - save_previous_kprobe(); - set_current_kprobe(p, regs); + save_previous_kprobe(kcb); + set_current_kprobe(p, regs, kcb); p->nmissed++; - kprobe_status = KPROBE_REENTER; - prepare_singlestep(p, regs); + kcb->kprobe_status = KPROBE_REENTER; + prepare_singlestep(p, regs, kcb); return 1; } else { - p = current_kprobe; + p = __get_cpu_var(current_kprobe); if (p->break_handler && p->break_handler(p, regs)) goto ss_probe; } - /* If it's not ours, can't be delete race, (we hold lock). */ goto no_kprobe; } - lock_kprobes(); p = get_kprobe(addr); if (!p) { - unlock_kprobes(); if (*(u32 *)addr != BREAKPOINT_INSTRUCTION) { /* * The breakpoint instruction was removed right @@ -171,14 +166,14 @@ static int __kprobes kprobe_handler(struct pt_regs *regs) goto no_kprobe; } - set_current_kprobe(p, regs); - kprobe_status = KPROBE_HIT_ACTIVE; + set_current_kprobe(p, regs, kcb); + kcb->kprobe_status = KPROBE_HIT_ACTIVE; if (p->pre_handler && p->pre_handler(p, regs)) return 1; ss_probe: - prepare_singlestep(p, regs); - kprobe_status = KPROBE_HIT_SS; + prepare_singlestep(p, regs, kcb); + kcb->kprobe_status = KPROBE_HIT_SS; return 1; no_kprobe: @@ -260,11 +255,12 @@ static void __kprobes retpc_fixup(struct pt_regs *regs, u32 insn, * This function prepares to return from the post-single-step * breakpoint trap. */ -static void __kprobes resume_execution(struct kprobe *p, struct pt_regs *regs) +static void __kprobes resume_execution(struct kprobe *p, + struct pt_regs *regs, struct kprobe_ctlblk *kcb) { u32 insn = p->ainsn.insn[0]; - regs->tpc = current_kprobe_orig_tnpc; + regs->tpc = kcb->kprobe_orig_tnpc; regs->tnpc = relbranch_fixup(insn, (unsigned long) p->addr, (unsigned long) &p->ainsn.insn[0], @@ -272,44 +268,48 @@ static void __kprobes resume_execution(struct kprobe *p, struct pt_regs *regs) retpc_fixup(regs, insn, (unsigned long) p->addr); regs->tstate = ((regs->tstate & ~TSTATE_PIL) | - current_kprobe_orig_tstate_pil); + kcb->kprobe_orig_tstate_pil); } static inline int post_kprobe_handler(struct pt_regs *regs) { - if (!kprobe_running()) + struct kprobe *cur = kprobe_running(); + struct kprobe_ctlblk *kcb = get_kprobe_ctlblk(); + + if (!cur) return 0; - if ((kprobe_status != KPROBE_REENTER) && current_kprobe->post_handler) { - kprobe_status = KPROBE_HIT_SSDONE; - current_kprobe->post_handler(current_kprobe, regs, 0); + if ((kcb->kprobe_status != KPROBE_REENTER) && cur->post_handler) { + kcb->kprobe_status = KPROBE_HIT_SSDONE; + cur->post_handler(cur, regs, 0); } - resume_execution(current_kprobe, regs); + resume_execution(cur, regs, kcb); /*Restore back the original saved kprobes variables and continue. */ - if (kprobe_status == KPROBE_REENTER) { - restore_previous_kprobe(); + if (kcb->kprobe_status == KPROBE_REENTER) { + restore_previous_kprobe(kcb); goto out; } - unlock_kprobes(); + reset_current_kprobe(); out: preempt_enable_no_resched(); return 1; } -/* Interrupts disabled, kprobe_lock held. */ static inline int kprobe_fault_handler(struct pt_regs *regs, int trapnr) { - if (current_kprobe->fault_handler - && current_kprobe->fault_handler(current_kprobe, regs, trapnr)) + struct kprobe *cur = kprobe_running(); + struct kprobe_ctlblk *kcb = get_kprobe_ctlblk(); + + if (cur->fault_handler && cur->fault_handler(cur, regs, trapnr)) return 1; - if (kprobe_status & KPROBE_HIT_SS) { - resume_execution(current_kprobe, regs); + if (kcb->kprobe_status & KPROBE_HIT_SS) { + resume_execution(cur, regs, kcb); - unlock_kprobes(); + reset_current_kprobe(); preempt_enable_no_resched(); } return 0; @@ -322,29 +322,30 @@ int __kprobes kprobe_exceptions_notify(struct notifier_block *self, unsigned long val, void *data) { struct die_args *args = (struct die_args *)data; + int ret = NOTIFY_DONE; + switch (val) { case DIE_DEBUG: if (kprobe_handler(args->regs)) - return NOTIFY_STOP; + ret = NOTIFY_STOP; break; case DIE_DEBUG_2: if (post_kprobe_handler(args->regs)) - return NOTIFY_STOP; + ret = NOTIFY_STOP; break; case DIE_GPF: - if (kprobe_running() && - kprobe_fault_handler(args->regs, args->trapnr)) - return NOTIFY_STOP; - break; case DIE_PAGE_FAULT: + /* kprobe_running() needs smp_processor_id() */ + preempt_disable(); if (kprobe_running() && kprobe_fault_handler(args->regs, args->trapnr)) - return NOTIFY_STOP; + ret = NOTIFY_STOP; + preempt_enable(); break; default: break; } - return NOTIFY_DONE; + return ret; } asmlinkage void __kprobes kprobe_trap(unsigned long trap_level, @@ -368,24 +369,21 @@ asmlinkage void __kprobes kprobe_trap(unsigned long trap_level, } /* Jprobes support. */ -static struct pt_regs jprobe_saved_regs; -static struct pt_regs *jprobe_saved_regs_location; -static struct sparc_stackf jprobe_saved_stack; - int __kprobes setjmp_pre_handler(struct kprobe *p, struct pt_regs *regs) { struct jprobe *jp = container_of(p, struct jprobe, kp); + struct kprobe_ctlblk *kcb = get_kprobe_ctlblk(); - jprobe_saved_regs_location = regs; - memcpy(&jprobe_saved_regs, regs, sizeof(*regs)); + kcb->jprobe_saved_regs_location = regs; + memcpy(&(kcb->jprobe_saved_regs), regs, sizeof(*regs)); /* Save a whole stack frame, this gets arguments * pushed onto the stack after using up all the * arg registers. */ - memcpy(&jprobe_saved_stack, + memcpy(&(kcb->jprobe_saved_stack), (char *) (regs->u_regs[UREG_FP] + STACK_BIAS), - sizeof(jprobe_saved_stack)); + sizeof(kcb->jprobe_saved_stack)); regs->tpc = (unsigned long) jp->entry; regs->tnpc = ((unsigned long) jp->entry) + 0x4UL; @@ -396,7 +394,6 @@ int __kprobes setjmp_pre_handler(struct kprobe *p, struct pt_regs *regs) void __kprobes jprobe_return(void) { - preempt_enable_no_resched(); __asm__ __volatile__( ".globl jprobe_return_trap_instruction\n" "jprobe_return_trap_instruction:\n\t" @@ -410,14 +407,15 @@ extern void __show_regs(struct pt_regs * regs); int __kprobes longjmp_break_handler(struct kprobe *p, struct pt_regs *regs) { u32 *addr = (u32 *) regs->tpc; + struct kprobe_ctlblk *kcb = get_kprobe_ctlblk(); if (addr == (u32 *) jprobe_return_trap_instruction) { - if (jprobe_saved_regs_location != regs) { + if (kcb->jprobe_saved_regs_location != regs) { printk("JPROBE: Current regs (%p) does not match " "saved regs (%p).\n", - regs, jprobe_saved_regs_location); + regs, kcb->jprobe_saved_regs_location); printk("JPROBE: Saved registers\n"); - __show_regs(jprobe_saved_regs_location); + __show_regs(kcb->jprobe_saved_regs_location); printk("JPROBE: Current registers\n"); __show_regs(regs); BUG(); @@ -426,12 +424,13 @@ int __kprobes longjmp_break_handler(struct kprobe *p, struct pt_regs *regs) * first so that UREG_FP is the original one for * the stack frame restore. */ - memcpy(regs, &jprobe_saved_regs, sizeof(*regs)); + memcpy(regs, &(kcb->jprobe_saved_regs), sizeof(*regs)); memcpy((char *) (regs->u_regs[UREG_FP] + STACK_BIAS), - &jprobe_saved_stack, - sizeof(jprobe_saved_stack)); + &(kcb->jprobe_saved_stack), + sizeof(kcb->jprobe_saved_stack)); + preempt_enable_no_resched(); return 1; } return 0; diff --git a/arch/sparc64/kernel/setup.c b/arch/sparc64/kernel/setup.c index c1f34237cdf..bf1849dd9c4 100644 --- a/arch/sparc64/kernel/setup.c +++ b/arch/sparc64/kernel/setup.c @@ -154,6 +154,7 @@ int prom_callback(long *args) pud_t *pudp; pmd_t *pmdp; pte_t *ptep; + pte_t pte; for_each_process(p) { mm = p->mm; @@ -178,8 +179,9 @@ int prom_callback(long *args) * being called from inside OBP. */ ptep = pte_offset_map(pmdp, va); - if (pte_present(*ptep)) { - tte = pte_val(*ptep); + pte = *ptep; + if (pte_present(pte)) { + tte = pte_val(pte); res = PROM_TRUE; } pte_unmap(ptep); @@ -218,6 +220,7 @@ int prom_callback(long *args) pud_t *pudp; pmd_t *pmdp; pte_t *ptep; + pte_t pte; int error; if ((va >= LOW_OBP_ADDRESS) && (va < HI_OBP_ADDRESS)) { @@ -240,8 +243,9 @@ int prom_callback(long *args) * being called from inside OBP. */ ptep = pte_offset_kernel(pmdp, va); - if (pte_present(*ptep)) { - tte = pte_val(*ptep); + pte = *ptep; + if (pte_present(pte)) { + tte = pte_val(pte); res = PROM_TRUE; } goto done; diff --git a/arch/sparc64/kernel/signal32.c b/arch/sparc64/kernel/signal32.c index aecccd0df1d..009a86e5ded 100644 --- a/arch/sparc64/kernel/signal32.c +++ b/arch/sparc64/kernel/signal32.c @@ -863,6 +863,7 @@ static void new_setup_frame32(struct k_sigaction *ka, struct pt_regs *regs, pud_t *pudp = pud_offset(pgdp, address); pmd_t *pmdp = pmd_offset(pudp, address); pte_t *ptep; + pte_t pte; regs->u_regs[UREG_I7] = (unsigned long) (&(sf->insns[0]) - 2); @@ -873,9 +874,10 @@ static void new_setup_frame32(struct k_sigaction *ka, struct pt_regs *regs, preempt_disable(); ptep = pte_offset_map(pmdp, address); - if (pte_present(*ptep)) { + pte = *ptep; + if (pte_present(pte)) { unsigned long page = (unsigned long) - page_address(pte_page(*ptep)); + page_address(pte_page(pte)); wmb(); __asm__ __volatile__("flush %0 + %1" diff --git a/arch/sparc64/kernel/smp.c b/arch/sparc64/kernel/smp.c index b137fd63f5e..5d90ee9aebf 100644 --- a/arch/sparc64/kernel/smp.c +++ b/arch/sparc64/kernel/smp.c @@ -839,43 +839,29 @@ void smp_flush_tlb_all(void) * questionable (in theory the big win for threads is the massive sharing of * address space state across processors). */ + +/* This currently is only used by the hugetlb arch pre-fault + * hook on UltraSPARC-III+ and later when changing the pagesize + * bits of the context register for an address space. + */ void smp_flush_tlb_mm(struct mm_struct *mm) { - /* - * This code is called from two places, dup_mmap and exit_mmap. In the - * former case, we really need a flush. In the later case, the callers - * are single threaded exec_mmap (really need a flush), multithreaded - * exec_mmap case (do not need to flush, since the caller gets a new - * context via activate_mm), and all other callers of mmput() whence - * the flush can be optimized since the associated threads are dead and - * the mm is being torn down (__exit_mm and other mmput callers) or the - * owning thread is dissociating itself from the mm. The - * (atomic_read(&mm->mm_users) == 0) check ensures real work is done - * for single thread exec and dup_mmap cases. An alternate check might - * have been (current->mm != mm). - * Kanoj Sarcar - */ - if (atomic_read(&mm->mm_users) == 0) - return; - - { - u32 ctx = CTX_HWBITS(mm->context); - int cpu = get_cpu(); + u32 ctx = CTX_HWBITS(mm->context); + int cpu = get_cpu(); - if (atomic_read(&mm->mm_users) == 1) { - mm->cpu_vm_mask = cpumask_of_cpu(cpu); - goto local_flush_and_out; - } + if (atomic_read(&mm->mm_users) == 1) { + mm->cpu_vm_mask = cpumask_of_cpu(cpu); + goto local_flush_and_out; + } - smp_cross_call_masked(&xcall_flush_tlb_mm, - ctx, 0, 0, - mm->cpu_vm_mask); + smp_cross_call_masked(&xcall_flush_tlb_mm, + ctx, 0, 0, + mm->cpu_vm_mask); - local_flush_and_out: - __flush_tlb_mm(ctx, SECONDARY_CONTEXT); +local_flush_and_out: + __flush_tlb_mm(ctx, SECONDARY_CONTEXT); - put_cpu(); - } + put_cpu(); } void smp_flush_tlb_pending(struct mm_struct *mm, unsigned long nr, unsigned long *vaddrs) @@ -883,34 +869,13 @@ void smp_flush_tlb_pending(struct mm_struct *mm, unsigned long nr, unsigned long u32 ctx = CTX_HWBITS(mm->context); int cpu = get_cpu(); - if (mm == current->active_mm && atomic_read(&mm->mm_users) == 1) { + if (mm == current->active_mm && atomic_read(&mm->mm_users) == 1) mm->cpu_vm_mask = cpumask_of_cpu(cpu); - goto local_flush_and_out; - } else { - /* This optimization is not valid. Normally - * we will be holding the page_table_lock, but - * there is an exception which is copy_page_range() - * when forking. The lock is held during the individual - * page table updates in the parent, but not at the - * top level, which is where we are invoked. - */ - if (0) { - cpumask_t this_cpu_mask = cpumask_of_cpu(cpu); - - /* By virtue of running under the mm->page_table_lock, - * and mmu_context.h:switch_mm doing the same, the - * following operation is safe. - */ - if (cpus_equal(mm->cpu_vm_mask, this_cpu_mask)) - goto local_flush_and_out; - } - } - - smp_cross_call_masked(&xcall_flush_tlb_pending, - ctx, nr, (unsigned long) vaddrs, - mm->cpu_vm_mask); + else + smp_cross_call_masked(&xcall_flush_tlb_pending, + ctx, nr, (unsigned long) vaddrs, + mm->cpu_vm_mask); -local_flush_and_out: __flush_tlb_pending(ctx, nr, vaddrs); put_cpu(); diff --git a/arch/sparc64/kernel/sunos_ioctl32.c b/arch/sparc64/kernel/sunos_ioctl32.c index 7654b8a7f03..3f619ead22c 100644 --- a/arch/sparc64/kernel/sunos_ioctl32.c +++ b/arch/sparc64/kernel/sunos_ioctl32.c @@ -24,7 +24,6 @@ #include <linux/smp_lock.h> #include <linux/syscalls.h> #include <linux/compat.h> -#include <asm/kbio.h> #define SUNOS_NR_OPEN 256 diff --git a/arch/sparc64/kernel/time.c b/arch/sparc64/kernel/time.c index 38c5525087a..459c8fbe02b 100644 --- a/arch/sparc64/kernel/time.c +++ b/arch/sparc64/kernel/time.c @@ -60,17 +60,6 @@ static void __iomem *mstk48t59_regs; static int set_rtc_mmss(unsigned long); -static __init unsigned long dummy_get_tick(void) -{ - return 0; -} - -static __initdata struct sparc64_tick_ops dummy_tick_ops = { - .get_tick = dummy_get_tick, -}; - -struct sparc64_tick_ops *tick_ops __read_mostly = &dummy_tick_ops; - #define TICK_PRIV_BIT (1UL << 63) #ifdef CONFIG_SMP @@ -200,6 +189,8 @@ static struct sparc64_tick_ops tick_operations __read_mostly = { .softint_mask = 1UL << 0, }; +struct sparc64_tick_ops *tick_ops __read_mostly = &tick_operations; + static void stick_init_tick(unsigned long offset) { tick_disable_protection(); diff --git a/arch/sparc64/kernel/us2e_cpufreq.c b/arch/sparc64/kernel/us2e_cpufreq.c index 686e526bec0..b35dc8dc995 100644 --- a/arch/sparc64/kernel/us2e_cpufreq.c +++ b/arch/sparc64/kernel/us2e_cpufreq.c @@ -388,10 +388,8 @@ err_out: kfree(driver); cpufreq_us2e_driver = NULL; } - if (us2e_freq_table) { - kfree(us2e_freq_table); - us2e_freq_table = NULL; - } + kfree(us2e_freq_table); + us2e_freq_table = NULL; return ret; } @@ -402,7 +400,6 @@ static void __exit us2e_freq_exit(void) { if (cpufreq_us2e_driver) { cpufreq_unregister_driver(cpufreq_us2e_driver); - kfree(cpufreq_us2e_driver); cpufreq_us2e_driver = NULL; kfree(us2e_freq_table); diff --git a/arch/sparc64/kernel/us3_cpufreq.c b/arch/sparc64/kernel/us3_cpufreq.c index 0340041f614..6d1f9a3c464 100644 --- a/arch/sparc64/kernel/us3_cpufreq.c +++ b/arch/sparc64/kernel/us3_cpufreq.c @@ -249,10 +249,8 @@ err_out: kfree(driver); cpufreq_us3_driver = NULL; } - if (us3_freq_table) { - kfree(us3_freq_table); - us3_freq_table = NULL; - } + kfree(us3_freq_table); + us3_freq_table = NULL; return ret; } @@ -263,7 +261,6 @@ static void __exit us3_freq_exit(void) { if (cpufreq_us3_driver) { cpufreq_unregister_driver(cpufreq_us3_driver); - kfree(cpufreq_us3_driver); cpufreq_us3_driver = NULL; kfree(us3_freq_table); diff --git a/arch/sparc64/mm/fault.c b/arch/sparc64/mm/fault.c index 31fbc67719a..3be278d916d 100644 --- a/arch/sparc64/mm/fault.c +++ b/arch/sparc64/mm/fault.c @@ -109,7 +109,7 @@ static void bad_kernel_pc(struct pt_regs *regs) * this. Additionally, to prevent kswapd from ripping ptes from * under us, raise interrupts around the time that we look at the * pte, kswapd will have to wait to get his smp ipi response from - * us. This saves us having to get page_table_lock. + * us. vmtruncate likewise. This saves us having to get pte lock. */ static unsigned int get_user_insn(unsigned long tpc) { diff --git a/arch/sparc64/oprofile/Kconfig b/arch/sparc64/oprofile/Kconfig index 5ade19801b9..d8a84088471 100644 --- a/arch/sparc64/oprofile/Kconfig +++ b/arch/sparc64/oprofile/Kconfig @@ -1,7 +1,3 @@ - -menu "Profiling support" - depends on EXPERIMENTAL - config PROFILING bool "Profiling support (EXPERIMENTAL)" help @@ -19,5 +15,3 @@ config OPROFILE If unsure, say N. -endmenu - diff --git a/arch/um/Kconfig b/arch/um/Kconfig index cd06ed7d842..3b5f47c4690 100644 --- a/arch/um/Kconfig +++ b/arch/um/Kconfig @@ -65,6 +65,30 @@ config STATIC_LINK chroot, and you disable CONFIG_MODE_TT, you probably want to say Y here. +config HOST_2G_2G + bool "2G/2G host address space split" + default n + depends on MODE_TT + help + This is needed when the host on which you run has a 2G/2G memory + split, instead of the customary 3G/1G. + + Note that to enable such a host + configuration, which makes sense only in some cases, you need special + host patches. + + So, if you do not know what to do here, say 'N'. + +config KERNEL_HALF_GIGS + int "Kernel address space size (in .5G units)" + default "1" + depends on MODE_TT + help + This determines the amount of address space that UML will allocate for + its own, measured in half Gigabyte units. The default is 1. + Change this only if you need to boot UML with an unusually large amount + of physical memory. + config MODE_SKAS bool "Separate Kernel Address Space support" default y @@ -182,19 +206,6 @@ config MAGIC_SYSRQ The keys are documented in <file:Documentation/sysrq.txt>. Don't say Y unless you really know what this hack does. -config HOST_2G_2G - bool "2G/2G host address space split" - default n - help - This is needed when the host on which you run has a 2G/2G memory - split, instead of the customary 3G/1G. - - Note that to enable such a host - configuration, which makes sense only in some cases, you need special - host patches. - - So, if you do not know what to do here, say 'N'. - config SMP bool "Symmetric multi-processing support (EXPERIMENTAL)" default n @@ -241,15 +252,6 @@ config NEST_LEVEL set to the host's CONFIG_NEST_LEVEL + CONFIG_KERNEL_HALF_GIGS. Only change this if you are running nested UMLs. -config KERNEL_HALF_GIGS - int "Kernel address space size (in .5G units)" - default "1" - help - This determines the amount of address space that UML will allocate for - its own, measured in half Gigabyte units. The default is 1. - Change this only if you need to boot UML with an unusually large amount - of physical memory. - config HIGHMEM bool "Highmem support" depends on !64BIT diff --git a/arch/um/Makefile b/arch/um/Makefile index e1ffad22460..e55d32e903b 100644 --- a/arch/um/Makefile +++ b/arch/um/Makefile @@ -60,7 +60,7 @@ AFLAGS += $(ARCH_INCLUDE) USER_CFLAGS := $(patsubst -I%,,$(CFLAGS)) USER_CFLAGS := $(patsubst -D__KERNEL__,,$(USER_CFLAGS)) $(ARCH_INCLUDE) \ - $(MODE_INCLUDE) + $(MODE_INCLUDE) -D_FILE_OFFSET_BITS=64 # -Derrno=kernel_errno - This turns all kernel references to errno into # kernel_errno to separate them from the libc errno. This allows -fno-common diff --git a/arch/um/Makefile-i386 b/arch/um/Makefile-i386 index aef7c50f8e1..1f7dcb064ae 100644 --- a/arch/um/Makefile-i386 +++ b/arch/um/Makefile-i386 @@ -17,8 +17,6 @@ ifeq ("$(origin SUBARCH)", "command line") ifneq ("$(shell uname -m | sed -e s/i.86/i386/)", "$(SUBARCH)") CFLAGS += $(call cc-option,-m32) USER_CFLAGS += $(call cc-option,-m32) -HOSTCFLAGS += $(call cc-option,-m32) -HOSTLDFLAGS += $(call cc-option,-m32) AFLAGS += $(call cc-option,-m32) LINK-y += $(call cc-option,-m32) UML_OBJCOPYFLAGS += -F $(ELF_FORMAT) diff --git a/arch/um/drivers/chan_user.c b/arch/um/drivers/chan_user.c index de3bce71aeb..1c55d580248 100644 --- a/arch/um/drivers/chan_user.c +++ b/arch/um/drivers/chan_user.c @@ -16,7 +16,6 @@ #include "user_util.h" #include "chan_user.h" #include "user.h" -#include "helper.h" #include "os.h" #include "choose-mode.h" #include "mode.h" diff --git a/arch/um/drivers/harddog_kern.c b/arch/um/drivers/harddog_kern.c index 147ec19f6bb..49acb2badf3 100644 --- a/arch/um/drivers/harddog_kern.c +++ b/arch/um/drivers/harddog_kern.c @@ -46,7 +46,6 @@ #include <linux/smp_lock.h> #include <linux/init.h> #include <asm/uaccess.h> -#include "helper.h" #include "mconsole.h" MODULE_LICENSE("GPL"); diff --git a/arch/um/drivers/harddog_user.c b/arch/um/drivers/harddog_user.c index d934181b8d4..def013b5a3c 100644 --- a/arch/um/drivers/harddog_user.c +++ b/arch/um/drivers/harddog_user.c @@ -8,7 +8,6 @@ #include <errno.h> #include "user_util.h" #include "user.h" -#include "helper.h" #include "mconsole.h" #include "os.h" #include "choose-mode.h" diff --git a/arch/um/drivers/net_kern.c b/arch/um/drivers/net_kern.c index 721e2601a75..fe865d9a372 100644 --- a/arch/um/drivers/net_kern.c +++ b/arch/um/drivers/net_kern.c @@ -96,7 +96,6 @@ irqreturn_t uml_net_interrupt(int irq, void *dev_id, struct pt_regs *regs) static int uml_net_open(struct net_device *dev) { struct uml_net_private *lp = dev->priv; - char addr[sizeof("255.255.255.255\0")]; int err; spin_lock(&lp->lock); @@ -107,7 +106,7 @@ static int uml_net_open(struct net_device *dev) } if(!lp->have_mac){ - dev_ip_addr(dev, addr, &lp->mac[2]); + dev_ip_addr(dev, &lp->mac[2]); set_ether_mac(dev, lp->mac); } @@ -664,8 +663,6 @@ static int uml_inetaddr_event(struct notifier_block *this, unsigned long event, void *ptr) { struct in_ifaddr *ifa = ptr; - u32 addr = ifa->ifa_address; - u32 netmask = ifa->ifa_mask; struct net_device *dev = ifa->ifa_dev->dev; struct uml_net_private *lp; void (*proc)(unsigned char *, unsigned char *, void *); @@ -685,14 +682,8 @@ static int uml_inetaddr_event(struct notifier_block *this, unsigned long event, break; } if(proc != NULL){ - addr_buf[0] = addr & 0xff; - addr_buf[1] = (addr >> 8) & 0xff; - addr_buf[2] = (addr >> 16) & 0xff; - addr_buf[3] = addr >> 24; - netmask_buf[0] = netmask & 0xff; - netmask_buf[1] = (netmask >> 8) & 0xff; - netmask_buf[2] = (netmask >> 16) & 0xff; - netmask_buf[3] = netmask >> 24; + memcpy(addr_buf, &ifa->ifa_address, sizeof(addr_buf)); + memcpy(netmask_buf, &ifa->ifa_mask, sizeof(netmask_buf)); (*proc)(addr_buf, netmask_buf, &lp->user); } return(NOTIFY_DONE); @@ -774,27 +765,18 @@ int setup_etheraddr(char *str, unsigned char *addr) return(1); } -void dev_ip_addr(void *d, char *buf, char *bin_buf) +void dev_ip_addr(void *d, unsigned char *bin_buf) { struct net_device *dev = d; struct in_device *ip = dev->ip_ptr; struct in_ifaddr *in; - u32 addr; if((ip == NULL) || ((in = ip->ifa_list) == NULL)){ printk(KERN_WARNING "dev_ip_addr - device not assigned an " "IP address\n"); return; } - addr = in->ifa_address; - sprintf(buf, "%d.%d.%d.%d", addr & 0xff, (addr >> 8) & 0xff, - (addr >> 16) & 0xff, addr >> 24); - if(bin_buf){ - bin_buf[0] = addr & 0xff; - bin_buf[1] = (addr >> 8) & 0xff; - bin_buf[2] = (addr >> 16) & 0xff; - bin_buf[3] = addr >> 24; - } + memcpy(bin_buf, &in->ifa_address, sizeof(in->ifa_address)); } void set_ether_mac(void *d, unsigned char *addr) @@ -829,14 +811,8 @@ void iter_addresses(void *d, void (*cb)(unsigned char *, unsigned char *, if(ip == NULL) return; in = ip->ifa_list; while(in != NULL){ - address[0] = in->ifa_address & 0xff; - address[1] = (in->ifa_address >> 8) & 0xff; - address[2] = (in->ifa_address >> 16) & 0xff; - address[3] = in->ifa_address >> 24; - netmask[0] = in->ifa_mask & 0xff; - netmask[1] = (in->ifa_mask >> 8) & 0xff; - netmask[2] = (in->ifa_mask >> 16) & 0xff; - netmask[3] = in->ifa_mask >> 24; + memcpy(address, &in->ifa_address, sizeof(address)); + memcpy(netmask, &in->ifa_mask, sizeof(netmask)); (*cb)(address, netmask, arg); in = in->ifa_next; } diff --git a/arch/um/drivers/net_user.c b/arch/um/drivers/net_user.c index 3730d4f1271..098fa65981a 100644 --- a/arch/um/drivers/net_user.c +++ b/arch/um/drivers/net_user.c @@ -16,7 +16,6 @@ #include "user_util.h" #include "kern_util.h" #include "net_user.h" -#include "helper.h" #include "os.h" int tap_open_common(void *dev, char *gate_addr) diff --git a/arch/um/drivers/port_user.c b/arch/um/drivers/port_user.c index 14dd2002d2d..ed4a1a6c5d8 100644 --- a/arch/um/drivers/port_user.c +++ b/arch/um/drivers/port_user.c @@ -18,7 +18,6 @@ #include "user.h" #include "chan_user.h" #include "port.h" -#include "helper.h" #include "os.h" struct port_chan { diff --git a/arch/um/drivers/random.c b/arch/um/drivers/random.c index f9e22198e01..ba471f5864a 100644 --- a/arch/um/drivers/random.c +++ b/arch/um/drivers/random.c @@ -58,10 +58,8 @@ static ssize_t rng_dev_read (struct file *filp, char __user *buf, size_t size, if (filp->f_flags & O_NONBLOCK) return ret ? : -EAGAIN; - if(need_resched()){ - current->state = TASK_INTERRUPTIBLE; - schedule_timeout(1); - } + if(need_resched()) + schedule_timeout_interruptible(1); } else return n; if (signal_pending (current)) diff --git a/arch/um/drivers/slip_user.c b/arch/um/drivers/slip_user.c index 71af444e591..89fbec185cc 100644 --- a/arch/um/drivers/slip_user.c +++ b/arch/um/drivers/slip_user.c @@ -14,7 +14,6 @@ #include "net_user.h" #include "slip.h" #include "slip_common.h" -#include "helper.h" #include "os.h" void slip_user_init(void *data, void *dev) diff --git a/arch/um/drivers/slirp_user.c b/arch/um/drivers/slirp_user.c index 8d91f663d82..b94c66114bc 100644 --- a/arch/um/drivers/slirp_user.c +++ b/arch/um/drivers/slirp_user.c @@ -13,7 +13,6 @@ #include "net_user.h" #include "slirp.h" #include "slip_common.h" -#include "helper.h" #include "os.h" void slirp_user_init(void *data, void *dev) diff --git a/arch/um/drivers/xterm.c b/arch/um/drivers/xterm.c index 90e0e5ff451..b530f1a6540 100644 --- a/arch/um/drivers/xterm.c +++ b/arch/um/drivers/xterm.c @@ -14,7 +14,6 @@ #include <sys/socket.h> #include "kern_util.h" #include "chan_user.h" -#include "helper.h" #include "user_util.h" #include "user.h" #include "os.h" diff --git a/arch/um/include/helper.h b/arch/um/include/helper.h deleted file mode 100644 index 162ac31192f..00000000000 --- a/arch/um/include/helper.h +++ /dev/null @@ -1,27 +0,0 @@ -/* - * Copyright (C) 2002 Jeff Dike (jdike@karaya.com) - * Licensed under the GPL - */ - -#ifndef __HELPER_H__ -#define __HELPER_H__ - -extern int run_helper(void (*pre_exec)(void *), void *pre_data, char **argv, - unsigned long *stack_out); -extern int run_helper_thread(int (*proc)(void *), void *arg, - unsigned int flags, unsigned long *stack_out, - int stack_order); -extern int helper_wait(int pid); - -#endif - -/* - * Overrides for Emacs so that we follow Linus's tabbing style. - * Emacs will notice this stuff at the end of the file and automatically - * adjust the settings for this buffer only. This must remain at the end - * of the file. - * --------------------------------------------------------------------------- - * Local variables: - * c-file-style: "linux" - * End: - */ diff --git a/arch/um/include/mem_user.h b/arch/um/include/mem_user.h index 9fef4123a65..a1064c5823b 100644 --- a/arch/um/include/mem_user.h +++ b/arch/um/include/mem_user.h @@ -57,7 +57,7 @@ extern int init_maps(unsigned long physmem, unsigned long iomem, unsigned long highmem); extern unsigned long get_vm(unsigned long len); extern void setup_physmem(unsigned long start, unsigned long usable, - unsigned long len, unsigned long highmem); + unsigned long len, unsigned long long highmem); extern void add_iomem(char *name, int fd, unsigned long size); extern unsigned long phys_offset(unsigned long phys); extern void unmap_physmem(void); diff --git a/arch/um/include/net_user.h b/arch/um/include/net_user.h index 89885a77a77..800c403920b 100644 --- a/arch/um/include/net_user.h +++ b/arch/um/include/net_user.h @@ -25,7 +25,7 @@ struct net_user_info { }; extern void ether_user_init(void *data, void *dev); -extern void dev_ip_addr(void *d, char *buf, char *bin_buf); +extern void dev_ip_addr(void *d, unsigned char *bin_buf); extern void set_ether_mac(void *d, unsigned char *addr); extern void iter_addresses(void *d, void (*cb)(unsigned char *, unsigned char *, void *), diff --git a/arch/um/include/os.h b/arch/um/include/os.h index 2e58e304b8b..2cccfa5b8ab 100644 --- a/arch/um/include/os.h +++ b/arch/um/include/os.h @@ -167,7 +167,7 @@ extern int can_do_skas(void); #endif /* mem.c */ -extern int create_mem_file(unsigned long len); +extern int create_mem_file(unsigned long long len); /* process.c */ extern unsigned long os_process_pc(int pid); @@ -199,6 +199,20 @@ extern void forward_pending_sigio(int target); extern int start_fork_tramp(void *arg, unsigned long temp_stack, int clone_flags, int (*tramp)(void *)); +/* uaccess.c */ +extern unsigned long __do_user_copy(void *to, const void *from, int n, + void **fault_addr, void **fault_catcher, + void (*op)(void *to, const void *from, + int n), int *faulted_out); + +/* helper.c */ +extern int run_helper(void (*pre_exec)(void *), void *pre_data, char **argv, + unsigned long *stack_out); +extern int run_helper_thread(int (*proc)(void *), void *arg, + unsigned int flags, unsigned long *stack_out, + int stack_order); +extern int helper_wait(int pid); + #endif /* diff --git a/arch/um/include/sysdep-i386/stub.h b/arch/um/include/sysdep-i386/stub.h index d3699fe1c61..a49ceb199ee 100644 --- a/arch/um/include/sysdep-i386/stub.h +++ b/arch/um/include/sysdep-i386/stub.h @@ -16,45 +16,69 @@ extern void stub_clone_handler(void); #define STUB_MMAP_NR __NR_mmap2 #define MMAP_OFFSET(o) ((o) >> PAGE_SHIFT) +static inline long stub_syscall1(long syscall, long arg1) +{ + long ret; + + __asm__ volatile ("int $0x80" : "=a" (ret) : "0" (syscall), "b" (arg1)); + + return ret; +} + static inline long stub_syscall2(long syscall, long arg1, long arg2) { long ret; - __asm__("movl %0, %%ecx; " : : "g" (arg2) : "%ecx"); - __asm__("movl %0, %%ebx; " : : "g" (arg1) : "%ebx"); - __asm__("movl %0, %%eax; " : : "g" (syscall) : "%eax"); - __asm__("int $0x80;" : : : "%eax"); - __asm__ __volatile__("movl %%eax, %0; " : "=g" (ret) :); - return(ret); + __asm__ volatile ("int $0x80" : "=a" (ret) : "0" (syscall), "b" (arg1), + "c" (arg2)); + + return ret; } static inline long stub_syscall3(long syscall, long arg1, long arg2, long arg3) { - __asm__("movl %0, %%edx; " : : "g" (arg3) : "%edx"); - return(stub_syscall2(syscall, arg1, arg2)); + long ret; + + __asm__ volatile ("int $0x80" : "=a" (ret) : "0" (syscall), "b" (arg1), + "c" (arg2), "d" (arg3)); + + return ret; } static inline long stub_syscall4(long syscall, long arg1, long arg2, long arg3, long arg4) { - __asm__("movl %0, %%esi; " : : "g" (arg4) : "%esi"); - return(stub_syscall3(syscall, arg1, arg2, arg3)); + long ret; + + __asm__ volatile ("int $0x80" : "=a" (ret) : "0" (syscall), "b" (arg1), + "c" (arg2), "d" (arg3), "S" (arg4)); + + return ret; +} + +static inline long stub_syscall5(long syscall, long arg1, long arg2, long arg3, + long arg4, long arg5) +{ + long ret; + + __asm__ volatile ("int $0x80" : "=a" (ret) : "0" (syscall), "b" (arg1), + "c" (arg2), "d" (arg3), "S" (arg4), "D" (arg5)); + + return ret; } static inline long stub_syscall6(long syscall, long arg1, long arg2, long arg3, long arg4, long arg5, long arg6) { long ret; - __asm__("movl %0, %%eax; " : : "g" (syscall) : "%eax"); - __asm__("movl %0, %%ebx; " : : "g" (arg1) : "%ebx"); - __asm__("movl %0, %%ecx; " : : "g" (arg2) : "%ecx"); - __asm__("movl %0, %%edx; " : : "g" (arg3) : "%edx"); - __asm__("movl %0, %%esi; " : : "g" (arg4) : "%esi"); - __asm__("movl %0, %%edi; " : : "g" (arg5) : "%edi"); - __asm__ __volatile__("pushl %%ebp ; movl %1, %%ebp; " - "int $0x80; popl %%ebp ; " - "movl %%eax, %0; " : "=g" (ret) : "g" (arg6) : "%eax"); - return(ret); + + __asm__ volatile ("push %%ebp ; movl %%eax,%%ebp ; movl %1,%%eax ; " + "int $0x80 ; pop %%ebp" + : "=a" (ret) + : "g" (syscall), "b" (arg1), "c" (arg2), "d" (arg3), + "S" (arg4), "D" (arg5), "0" (arg6)); + + return ret; } static inline void trap_myself(void) diff --git a/arch/um/include/sysdep-x86_64/stub.h b/arch/um/include/sysdep-x86_64/stub.h index f599058d826..2bd6e7a9728 100644 --- a/arch/um/include/sysdep-x86_64/stub.h +++ b/arch/um/include/sysdep-x86_64/stub.h @@ -17,37 +17,72 @@ extern void stub_clone_handler(void); #define STUB_MMAP_NR __NR_mmap #define MMAP_OFFSET(o) (o) +#define __syscall_clobber "r11","rcx","memory" +#define __syscall "syscall" + static inline long stub_syscall2(long syscall, long arg1, long arg2) { long ret; - __asm__("movq %0, %%rsi; " : : "g" (arg2) : "%rsi"); - __asm__("movq %0, %%rdi; " : : "g" (arg1) : "%rdi"); - __asm__("movq %0, %%rax; " : : "g" (syscall) : "%rax"); - __asm__("syscall;" : : : "%rax", "%r11", "%rcx"); - __asm__ __volatile__("movq %%rax, %0; " : "=g" (ret) :); - return(ret); + __asm__ volatile (__syscall + : "=a" (ret) + : "0" (syscall), "D" (arg1), "S" (arg2) : __syscall_clobber ); + + return ret; } static inline long stub_syscall3(long syscall, long arg1, long arg2, long arg3) { - __asm__("movq %0, %%rdx; " : : "g" (arg3) : "%rdx"); - return(stub_syscall2(syscall, arg1, arg2)); + long ret; + + __asm__ volatile (__syscall + : "=a" (ret) + : "0" (syscall), "D" (arg1), "S" (arg2), "d" (arg3) + : __syscall_clobber ); + + return ret; } static inline long stub_syscall4(long syscall, long arg1, long arg2, long arg3, long arg4) { - __asm__("movq %0, %%r10; " : : "g" (arg4) : "%r10"); - return(stub_syscall3(syscall, arg1, arg2, arg3)); + long ret; + + __asm__ volatile ("movq %5,%%r10 ; " __syscall + : "=a" (ret) + : "0" (syscall), "D" (arg1), "S" (arg2), "d" (arg3), + "g" (arg4) + : __syscall_clobber, "r10" ); + + return ret; +} + +static inline long stub_syscall5(long syscall, long arg1, long arg2, long arg3, + long arg4, long arg5) +{ + long ret; + + __asm__ volatile ("movq %5,%%r10 ; movq %6,%%r8 ; " __syscall + : "=a" (ret) + : "0" (syscall), "D" (arg1), "S" (arg2), "d" (arg3), + "g" (arg4), "g" (arg5) + : __syscall_clobber, "r10", "r8" ); + + return ret; } static inline long stub_syscall6(long syscall, long arg1, long arg2, long arg3, long arg4, long arg5, long arg6) { - __asm__("movq %0, %%r9; " : : "g" (arg6) : "%r9"); - __asm__("movq %0, %%r8; " : : "g" (arg5) : "%r8"); - return(stub_syscall4(syscall, arg1, arg2, arg3, arg4)); + long ret; + + __asm__ volatile ("movq %5,%%r10 ; movq %6,%%r8 ; " + "movq %7, %%r9; " __syscall : "=a" (ret) + : "0" (syscall), "D" (arg1), "S" (arg2), "d" (arg3), + "g" (arg4), "g" (arg5), "g" (arg6) + : __syscall_clobber, "r10", "r8", "r9" ); + + return ret; } static inline void trap_myself(void) diff --git a/arch/um/include/uml_uaccess.h b/arch/um/include/uml_uaccess.h index f77eb642845..c0df11d06f5 100644 --- a/arch/um/include/uml_uaccess.h +++ b/arch/um/include/uml_uaccess.h @@ -8,10 +8,6 @@ extern int __do_copy_to_user(void *to, const void *from, int n, void **fault_addr, void **fault_catcher); -extern unsigned long __do_user_copy(void *to, const void *from, int n, - void **fault_addr, void **fault_catcher, - void (*op)(void *to, const void *from, - int n), int *faulted_out); void __do_copy(void *to, const void *from, int n); #endif diff --git a/arch/um/kernel/Makefile b/arch/um/kernel/Makefile index 1a0001b3850..3de9d21e36b 100644 --- a/arch/um/kernel/Makefile +++ b/arch/um/kernel/Makefile @@ -7,10 +7,10 @@ extra-y := vmlinux.lds clean-files := obj-y = config.o exec_kern.o exitcode.o \ - helper.o init_task.o irq.o irq_user.o ksyms.o main.o mem.o physmem.o \ + init_task.o irq.o irq_user.o ksyms.o mem.o physmem.o \ process_kern.o ptrace.o reboot.o resource.o sigio_user.o sigio_kern.o \ signal_kern.o signal_user.o smp.o syscall_kern.o sysrq.o time.o \ - time_kern.o tlb.o trap_kern.o trap_user.o uaccess_user.o um_arch.o \ + time_kern.o tlb.o trap_kern.o trap_user.o uaccess.o um_arch.o \ umid.o user_util.o obj-$(CONFIG_BLK_DEV_INITRD) += initrd.o @@ -24,8 +24,7 @@ obj-$(CONFIG_MODE_SKAS) += skas/ user-objs-$(CONFIG_TTY_LOG) += tty_log.o -USER_OBJS := $(user-objs-y) config.o helper.o main.o time.o tty_log.o umid.o \ - user_util.o +USER_OBJS := $(user-objs-y) config.o time.o tty_log.o umid.o user_util.o include arch/um/scripts/Makefile.rules diff --git a/arch/um/kernel/ksyms.c b/arch/um/kernel/ksyms.c index a97a72e516a..7713e7a6f47 100644 --- a/arch/um/kernel/ksyms.c +++ b/arch/um/kernel/ksyms.c @@ -20,7 +20,6 @@ #include "user_util.h" #include "mem_user.h" #include "os.h" -#include "helper.h" EXPORT_SYMBOL(stop); EXPORT_SYMBOL(uml_physmem); diff --git a/arch/um/kernel/mem.c b/arch/um/kernel/mem.c index 462cc9d6538..fa4f915be5c 100644 --- a/arch/um/kernel/mem.c +++ b/arch/um/kernel/mem.c @@ -234,8 +234,8 @@ void paging_init(void) empty_bad_page = (unsigned long *) alloc_bootmem_low_pages(PAGE_SIZE); for(i=0;i<sizeof(zones_size)/sizeof(zones_size[0]);i++) zones_size[i] = 0; - zones_size[0] = (end_iomem >> PAGE_SHIFT) - (uml_physmem >> PAGE_SHIFT); - zones_size[2] = highmem >> PAGE_SHIFT; + zones_size[ZONE_DMA] = (end_iomem >> PAGE_SHIFT) - (uml_physmem >> PAGE_SHIFT); + zones_size[ZONE_HIGHMEM] = highmem >> PAGE_SHIFT; free_area_init(zones_size); /* diff --git a/arch/um/kernel/physmem.c b/arch/um/kernel/physmem.c index ea670fcc8af..f3b583a878a 100644 --- a/arch/um/kernel/physmem.c +++ b/arch/um/kernel/physmem.c @@ -246,7 +246,7 @@ int is_remapped(void *virt) /* Changed during early boot */ unsigned long high_physmem; -extern unsigned long physmem_size; +extern unsigned long long physmem_size; int init_maps(unsigned long physmem, unsigned long iomem, unsigned long highmem) { @@ -321,7 +321,7 @@ void map_memory(unsigned long virt, unsigned long phys, unsigned long len, extern int __syscall_stub_start, __binary_start; void setup_physmem(unsigned long start, unsigned long reserve_end, - unsigned long len, unsigned long highmem) + unsigned long len, unsigned long long highmem) { unsigned long reserve = reserve_end - start; int pfn = PFN_UP(__pa(reserve_end)); diff --git a/arch/um/kernel/ptrace.c b/arch/um/kernel/ptrace.c index 71af4d50389..98e09395c09 100644 --- a/arch/um/kernel/ptrace.c +++ b/arch/um/kernel/ptrace.c @@ -43,53 +43,10 @@ void ptrace_disable(struct task_struct *child) extern int peek_user(struct task_struct * child, long addr, long data); extern int poke_user(struct task_struct * child, long addr, long data); -long sys_ptrace(long request, long pid, long addr, long data) +long arch_ptrace(struct task_struct *child, long request, long addr, long data) { - struct task_struct *child; int i, ret; - lock_kernel(); - ret = -EPERM; - if (request == PTRACE_TRACEME) { - /* are we already being traced? */ - if (current->ptrace & PT_PTRACED) - goto out; - - ret = security_ptrace(current->parent, current); - if (ret) - goto out; - - /* set the ptrace bit in the process flags. */ - current->ptrace |= PT_PTRACED; - ret = 0; - goto out; - } - ret = -ESRCH; - read_lock(&tasklist_lock); - child = find_task_by_pid(pid); - if (child) - get_task_struct(child); - read_unlock(&tasklist_lock); - if (!child) - goto out; - - ret = -EPERM; - if (pid == 1) /* you may not mess with init */ - goto out_tsk; - - if (request == PTRACE_ATTACH) { - ret = ptrace_attach(child); - goto out_tsk; - } - -#ifdef SUBACH_PTRACE_SPECIAL - SUBARCH_PTRACE_SPECIAL(child,request,addr,data); -#endif - - ret = ptrace_check_attach(child, request == PTRACE_KILL); - if (ret < 0) - goto out_tsk; - switch (request) { /* when I and D space are separate, these will need to be fixed. */ case PTRACE_PEEKTEXT: /* read word at location addr. */ @@ -282,10 +239,7 @@ long sys_ptrace(long request, long pid, long addr, long data) ret = ptrace_request(child, request, addr, data); break; } - out_tsk: - put_task_struct(child); - out: - unlock_kernel(); + return ret; } diff --git a/arch/um/kernel/sigio_user.c b/arch/um/kernel/sigio_user.c index a52751108aa..48b1f644b9a 100644 --- a/arch/um/kernel/sigio_user.c +++ b/arch/um/kernel/sigio_user.c @@ -18,7 +18,6 @@ #include "kern_util.h" #include "user_util.h" #include "sigio.h" -#include "helper.h" #include "os.h" /* Changed during early boot */ @@ -225,7 +224,7 @@ static int need_poll(int n) next_poll.used = n; return(0); } - if(next_poll.poll != NULL) kfree(next_poll.poll); + kfree(next_poll.poll); next_poll.poll = um_kmalloc_atomic(n * sizeof(struct pollfd)); if(next_poll.poll == NULL){ printk("need_poll : failed to allocate new pollfds\n"); diff --git a/arch/um/kernel/skas/include/mmu-skas.h b/arch/um/kernel/skas/include/mmu-skas.h index 09536f81ee4..44110c521e4 100644 --- a/arch/um/kernel/skas/include/mmu-skas.h +++ b/arch/um/kernel/skas/include/mmu-skas.h @@ -8,6 +8,7 @@ #include "linux/config.h" #include "mm_id.h" +#include "asm/ldt.h" struct mmu_context_skas { struct mm_id id; @@ -15,6 +16,7 @@ struct mmu_context_skas { #ifdef CONFIG_3_LEVEL_PGTABLES unsigned long last_pmd; #endif + uml_ldt_t ldt; }; extern void switch_mm_skas(struct mm_id * mm_idp); diff --git a/arch/um/kernel/skas/include/skas.h b/arch/um/kernel/skas/include/skas.h index 060934740f9..daa2f85b684 100644 --- a/arch/um/kernel/skas/include/skas.h +++ b/arch/um/kernel/skas/include/skas.h @@ -10,7 +10,8 @@ #include "sysdep/ptrace.h" extern int userspace_pid[]; -extern int proc_mm, ptrace_faultinfo; +extern int proc_mm, ptrace_faultinfo, ptrace_ldt; +extern int skas_needs_stub; extern void switch_threads(void *me, void *next); extern void thread_wait(void *sw, void *fb); diff --git a/arch/um/kernel/skas/mem.c b/arch/um/kernel/skas/mem.c index 147466d7ff4..88ab96c609c 100644 --- a/arch/um/kernel/skas/mem.c +++ b/arch/um/kernel/skas/mem.c @@ -20,7 +20,7 @@ unsigned long set_task_sizes_skas(int arg, unsigned long *host_size_out, *task_size_out = CONFIG_HOST_TASK_SIZE; #else *host_size_out = top; - if (proc_mm && ptrace_faultinfo) + if (!skas_needs_stub) *task_size_out = top; else *task_size_out = CONFIG_STUB_START & PGDIR_MASK; #endif diff --git a/arch/um/kernel/skas/mmu.c b/arch/um/kernel/skas/mmu.c index 9e5e39cea82..677871f1b37 100644 --- a/arch/um/kernel/skas/mmu.c +++ b/arch/um/kernel/skas/mmu.c @@ -15,6 +15,7 @@ #include "asm/mmu.h" #include "asm/pgalloc.h" #include "asm/pgtable.h" +#include "asm/ldt.h" #include "os.h" #include "skas.h" @@ -74,13 +75,12 @@ static int init_stub_pte(struct mm_struct *mm, unsigned long proc, int init_new_context_skas(struct task_struct *task, struct mm_struct *mm) { - struct mm_struct *cur_mm = current->mm; - struct mm_id *cur_mm_id = &cur_mm->context.skas.id; - struct mm_id *mm_id = &mm->context.skas.id; + struct mmu_context_skas *from_mm = NULL; + struct mmu_context_skas *to_mm = &mm->context.skas; unsigned long stack = 0; - int from, ret = -ENOMEM; + int from_fd, ret = -ENOMEM; - if(!proc_mm || !ptrace_faultinfo){ + if(skas_needs_stub){ stack = get_zeroed_page(GFP_KERNEL); if(stack == 0) goto out; @@ -102,33 +102,43 @@ int init_new_context_skas(struct task_struct *task, struct mm_struct *mm) mm->nr_ptes--; } - mm_id->stack = stack; + + to_mm->id.stack = stack; + if(current->mm != NULL && current->mm != &init_mm) + from_mm = ¤t->mm->context.skas; if(proc_mm){ - if((cur_mm != NULL) && (cur_mm != &init_mm)) - from = cur_mm_id->u.mm_fd; - else from = -1; + if(from_mm) + from_fd = from_mm->id.u.mm_fd; + else from_fd = -1; - ret = new_mm(from, stack); + ret = new_mm(from_fd, stack); if(ret < 0){ printk("init_new_context_skas - new_mm failed, " "errno = %d\n", ret); goto out_free; } - mm_id->u.mm_fd = ret; + to_mm->id.u.mm_fd = ret; } else { - if((cur_mm != NULL) && (cur_mm != &init_mm)) - mm_id->u.pid = copy_context_skas0(stack, - cur_mm_id->u.pid); - else mm_id->u.pid = start_userspace(stack); + if(from_mm) + to_mm->id.u.pid = copy_context_skas0(stack, + from_mm->id.u.pid); + else to_mm->id.u.pid = start_userspace(stack); + } + + ret = init_new_ldt(to_mm, from_mm); + if(ret < 0){ + printk("init_new_context_skas - init_ldt" + " failed, errno = %d\n", ret); + goto out_free; } return 0; out_free: - if(mm_id->stack != 0) - free_page(mm_id->stack); + if(to_mm->id.stack != 0) + free_page(to_mm->id.stack); out: return ret; } diff --git a/arch/um/kernel/skas/process.c b/arch/um/kernel/skas/process.c index 5cd0e992978..599d679bd4f 100644 --- a/arch/um/kernel/skas/process.c +++ b/arch/um/kernel/skas/process.c @@ -69,6 +69,17 @@ void wait_stub_done(int pid, int sig, char * fname) if((n < 0) || !WIFSTOPPED(status) || (WSTOPSIG(status) != SIGUSR1 && WSTOPSIG(status) != SIGTRAP)){ + unsigned long regs[FRAME_SIZE]; + if(ptrace(PTRACE_GETREGS, pid, 0, regs) < 0) + printk("Failed to get registers from stub, " + "errno = %d\n", errno); + else { + int i; + + printk("Stub registers -\n"); + for(i = 0; i < FRAME_SIZE; i++) + printk("\t%d - %lx\n", i, regs[i]); + } panic("%s : failed to wait for SIGUSR1/SIGTRAP, " "pid = %d, n = %d, errno = %d, status = 0x%x\n", fname, pid, n, errno, status); @@ -370,9 +381,9 @@ int copy_context_skas0(unsigned long new_stack, int pid) } /* - * This is used only, if proc_mm is available, while PTRACE_FAULTINFO - * isn't. Opening /proc/mm creates a new mm_context, which lacks the stub-pages - * Thus, we map them using /proc/mm-fd + * This is used only, if stub pages are needed, while proc_mm is + * availabl. Opening /proc/mm creates a new mm_context, which lacks + * the stub-pages. Thus, we map them using /proc/mm-fd */ void map_stub_pages(int fd, unsigned long code, unsigned long data, unsigned long stack) diff --git a/arch/um/kernel/skas/process_kern.c b/arch/um/kernel/skas/process_kern.c index efe92e8aa2a..9c990253966 100644 --- a/arch/um/kernel/skas/process_kern.c +++ b/arch/um/kernel/skas/process_kern.c @@ -145,7 +145,7 @@ int new_mm(int from, unsigned long stack) "err = %d\n", -n); } - if(!ptrace_faultinfo) + if(skas_needs_stub) map_stub_pages(fd, CONFIG_STUB_CODE, CONFIG_STUB_DATA, stack); return(fd); diff --git a/arch/um/kernel/tt/uaccess_user.c b/arch/um/kernel/tt/uaccess_user.c index 8c220f054b6..6c92bbccb49 100644 --- a/arch/um/kernel/tt/uaccess_user.c +++ b/arch/um/kernel/tt/uaccess_user.c @@ -10,6 +10,7 @@ #include "uml_uaccess.h" #include "task.h" #include "kern_util.h" +#include "os.h" int __do_copy_from_user(void *to, const void *from, int n, void **fault_addr, void **fault_catcher) diff --git a/arch/um/kernel/uaccess.c b/arch/um/kernel/uaccess.c new file mode 100644 index 00000000000..054e3de0784 --- /dev/null +++ b/arch/um/kernel/uaccess.c @@ -0,0 +1,30 @@ +/* + * Copyright (C) 2001 Chris Emerson (cemerson@chiark.greenend.org.uk) + * Copyright (C) 2001, 2002 Jeff Dike (jdike@karaya.com) + * Licensed under the GPL + */ + +/* These are here rather than tt/uaccess.c because skas mode needs them in + * order to do SIGBUS recovery when a tmpfs mount runs out of room. + */ + +#include <linux/string.h> +#include "os.h" + +void __do_copy(void *to, const void *from, int n) +{ + memcpy(to, from, n); +} + + +int __do_copy_to_user(void *to, const void *from, int n, + void **fault_addr, void **fault_catcher) +{ + unsigned long fault; + int faulted; + + fault = __do_user_copy(to, from, n, fault_addr, fault_catcher, + __do_copy, &faulted); + if(!faulted) return(0); + else return(n - (fault - (unsigned long) to)); +} diff --git a/arch/um/kernel/uaccess_user.c b/arch/um/kernel/uaccess_user.c deleted file mode 100644 index d035257ed0a..00000000000 --- a/arch/um/kernel/uaccess_user.c +++ /dev/null @@ -1,64 +0,0 @@ -/* - * Copyright (C) 2001 Chris Emerson (cemerson@chiark.greenend.org.uk) - * Copyright (C) 2001, 2002 Jeff Dike (jdike@karaya.com) - * Licensed under the GPL - */ - -#include <setjmp.h> -#include <string.h> - -/* These are here rather than tt/uaccess.c because skas mode needs them in - * order to do SIGBUS recovery when a tmpfs mount runs out of room. - */ - -unsigned long __do_user_copy(void *to, const void *from, int n, - void **fault_addr, void **fault_catcher, - void (*op)(void *to, const void *from, - int n), int *faulted_out) -{ - unsigned long *faddrp = (unsigned long *) fault_addr, ret; - - sigjmp_buf jbuf; - *fault_catcher = &jbuf; - if(sigsetjmp(jbuf, 1) == 0){ - (*op)(to, from, n); - ret = 0; - *faulted_out = 0; - } - else { - ret = *faddrp; - *faulted_out = 1; - } - *fault_addr = NULL; - *fault_catcher = NULL; - return ret; -} - -void __do_copy(void *to, const void *from, int n) -{ - memcpy(to, from, n); -} - - -int __do_copy_to_user(void *to, const void *from, int n, - void **fault_addr, void **fault_catcher) -{ - unsigned long fault; - int faulted; - - fault = __do_user_copy(to, from, n, fault_addr, fault_catcher, - __do_copy, &faulted); - if(!faulted) return(0); - else return(n - (fault - (unsigned long) to)); -} - -/* - * Overrides for Emacs so that we follow Linus's tabbing style. - * Emacs will notice this stuff at the end of the file and automatically - * adjust the settings for this buffer only. This must remain at the end - * of the file. - * --------------------------------------------------------------------------- - * Local variables: - * c-file-style: "linux" - * End: - */ diff --git a/arch/um/kernel/um_arch.c b/arch/um/kernel/um_arch.c index 93dc782dc1c..142a9493912 100644 --- a/arch/um/kernel/um_arch.c +++ b/arch/um/kernel/um_arch.c @@ -137,7 +137,7 @@ static char *argv1_end = NULL; /* Set in early boot */ static int have_root __initdata = 0; -long physmem_size = 32 * 1024 * 1024; +long long physmem_size = 32 * 1024 * 1024; void set_cmdline(char *cmd) { @@ -402,7 +402,7 @@ int linux_main(int argc, char **argv) #ifndef CONFIG_HIGHMEM highmem = 0; printf("CONFIG_HIGHMEM not enabled - physical memory shrunk " - "to %ld bytes\n", physmem_size); + "to %lu bytes\n", physmem_size); #endif } @@ -414,8 +414,8 @@ int linux_main(int argc, char **argv) setup_physmem(uml_physmem, uml_reserved, physmem_size, highmem); if(init_maps(physmem_size, iomem_size, highmem)){ - printf("Failed to allocate mem_map for %ld bytes of physical " - "memory and %ld bytes of highmem\n", physmem_size, + printf("Failed to allocate mem_map for %lu bytes of physical " + "memory and %lu bytes of highmem\n", physmem_size, highmem); exit(1); } @@ -426,7 +426,7 @@ int linux_main(int argc, char **argv) end_vm = start_vm + virtmem_size; if(virtmem_size < physmem_size) - printf("Kernel virtual memory size shrunk to %ld bytes\n", + printf("Kernel virtual memory size shrunk to %lu bytes\n", virtmem_size); uml_postsetup(); diff --git a/arch/um/kernel/user_util.c b/arch/um/kernel/user_util.c index 41d17c71511..4c231161f25 100644 --- a/arch/um/kernel/user_util.c +++ b/arch/um/kernel/user_util.c @@ -27,7 +27,6 @@ #include "user.h" #include "mem_user.h" #include "init.h" -#include "helper.h" #include "ptrace_user.h" #include "uml-config.h" diff --git a/arch/um/os-Linux/Makefile b/arch/um/os-Linux/Makefile index d15ec2af6a2..b83ac8e21c3 100644 --- a/arch/um/os-Linux/Makefile +++ b/arch/um/os-Linux/Makefile @@ -3,11 +3,12 @@ # Licensed under the GPL # -obj-y = aio.o elf_aux.o file.o mem.o process.o signal.o start_up.o time.o \ - tt.o tty.o user_syms.o drivers/ sys-$(SUBARCH)/ +obj-y = aio.o elf_aux.o file.o helper.o main.o mem.o process.o signal.o \ + start_up.o time.o tt.o tty.o uaccess.o user_syms.o drivers/ \ + sys-$(SUBARCH)/ -USER_OBJS := aio.o elf_aux.o file.o mem.o process.o signal.o start_up.o \ - time.o tt.o tty.o +USER_OBJS := aio.o elf_aux.o file.o helper.o main.o mem.o process.o signal.o \ + start_up.o time.o tt.o tty.o uaccess.o elf_aux.o: $(ARCH_DIR)/kernel-offsets.h CFLAGS_elf_aux.o += -I$(objtree)/arch/um diff --git a/arch/um/os-Linux/aio.c b/arch/um/os-Linux/aio.c index 41cfb094420..ffa759addd3 100644 --- a/arch/um/os-Linux/aio.c +++ b/arch/um/os-Linux/aio.c @@ -10,7 +10,6 @@ #include <sched.h> #include <sys/syscall.h> #include "os.h" -#include "helper.h" #include "aio.h" #include "init.h" #include "user.h" diff --git a/arch/um/os-Linux/drivers/ethertap_user.c b/arch/um/os-Linux/drivers/ethertap_user.c index cd4d6544da7..901b85e8a1c 100644 --- a/arch/um/os-Linux/drivers/ethertap_user.c +++ b/arch/um/os-Linux/drivers/ethertap_user.c @@ -19,7 +19,6 @@ #include "user_util.h" #include "net_user.h" #include "etap.h" -#include "helper.h" #include "os.h" #define MAX_PACKET ETH_MAX_PACKET diff --git a/arch/um/os-Linux/drivers/tuntap_user.c b/arch/um/os-Linux/drivers/tuntap_user.c index 4ba9b17adf1..52945338b64 100644 --- a/arch/um/os-Linux/drivers/tuntap_user.c +++ b/arch/um/os-Linux/drivers/tuntap_user.c @@ -20,7 +20,6 @@ #include "kern_util.h" #include "user_util.h" #include "user.h" -#include "helper.h" #include "os.h" #define MAX_PACKET ETH_MAX_PACKET diff --git a/arch/um/kernel/helper.c b/arch/um/os-Linux/helper.c index 33fb0bd3b11..36cc8475bcd 100644 --- a/arch/um/kernel/helper.c +++ b/arch/um/os-Linux/helper.c @@ -1,4 +1,4 @@ -/* +/* * Copyright (C) 2002 Jeff Dike (jdike@karaya.com) * Licensed under the GPL */ @@ -13,7 +13,6 @@ #include "user.h" #include "kern_util.h" #include "user_util.h" -#include "helper.h" #include "os.h" struct helper_data { @@ -46,7 +45,7 @@ static int helper_child(void *arg) errval = errno; printk("execvp of '%s' failed - errno = %d\n", argv[0], errno); os_write_file(data->fd, &errval, sizeof(errval)); - os_kill_process(os_getpid(), 0); + kill(os_getpid(), SIGKILL); return(0); } @@ -90,7 +89,7 @@ int run_helper(void (*pre_exec)(void *), void *pre_data, char **argv, goto out_close; } - os_close_file(fds[1]); + close(fds[1]); fds[1] = -1; /*Read the errno value from the child.*/ @@ -98,7 +97,8 @@ int run_helper(void (*pre_exec)(void *), void *pre_data, char **argv, if(n < 0){ printk("run_helper : read on pipe failed, ret = %d\n", -n); ret = n; - os_kill_process(pid, 1); + kill(pid, SIGKILL); + CATCH_EINTR(waitpid(pid, NULL, 0)); } else if(n != 0){ CATCH_EINTR(n = waitpid(pid, NULL, 0)); @@ -109,8 +109,8 @@ int run_helper(void (*pre_exec)(void *), void *pre_data, char **argv, out_close: if (fds[1] != -1) - os_close_file(fds[1]); - os_close_file(fds[0]); + close(fds[1]); + close(fds[0]); out_free: if(stack_out == NULL) free_stack(stack, 0); @@ -118,7 +118,7 @@ out_free: return(ret); } -int run_helper_thread(int (*proc)(void *), void *arg, unsigned int flags, +int run_helper_thread(int (*proc)(void *), void *arg, unsigned int flags, unsigned long *stack_out, int stack_order) { unsigned long stack, sp; @@ -131,7 +131,7 @@ int run_helper_thread(int (*proc)(void *), void *arg, unsigned int flags, pid = clone(proc, (void *) sp, flags | SIGCHLD, arg); if(pid < 0){ err = -errno; - printk("run_helper_thread : clone failed, errno = %d\n", + printk("run_helper_thread : clone failed, errno = %d\n", errno); return err; } diff --git a/arch/um/kernel/main.c b/arch/um/os-Linux/main.c index d31027f0fe3..23da27d2256 100644 --- a/arch/um/kernel/main.c +++ b/arch/um/os-Linux/main.c @@ -157,25 +157,25 @@ int main(int argc, char **argv, char **envp) */ change_sig(SIGPROF, 0); - /* This signal stuff used to be in the reboot case. However, - * sometimes a SIGVTALRM can come in when we're halting (reproducably - * when writing out gcov information, presumably because that takes - * some time) and cause a segfault. - */ - - /* stop timers and set SIG*ALRM to be ignored */ - disable_timer(); - - /* disable SIGIO for the fds and set SIGIO to be ignored */ - err = deactivate_all_fds(); - if(err) - printf("deactivate_all_fds failed, errno = %d\n", -err); - - /* Let any pending signals fire now. This ensures - * that they won't be delivered after the exec, when - * they are definitely not expected. - */ - unblock_signals(); + /* This signal stuff used to be in the reboot case. However, + * sometimes a SIGVTALRM can come in when we're halting (reproducably + * when writing out gcov information, presumably because that takes + * some time) and cause a segfault. + */ + + /* stop timers and set SIG*ALRM to be ignored */ + disable_timer(); + + /* disable SIGIO for the fds and set SIGIO to be ignored */ + err = deactivate_all_fds(); + if(err) + printf("deactivate_all_fds failed, errno = %d\n", -err); + + /* Let any pending signals fire now. This ensures + * that they won't be delivered after the exec, when + * they are definitely not expected. + */ + unblock_signals(); /* Reboot */ if(ret){ @@ -257,14 +257,3 @@ void __wrap_free(void *ptr) } else __real_free(ptr); } - -/* - * Overrides for Emacs so that we follow Linus's tabbing style. - * Emacs will notice this stuff at the end of the file and automatically - * adjust the settings for this buffer only. This must remain at the end - * of the file. - * --------------------------------------------------------------------------- - * Local variables: - * c-file-style: "linux" - * End: - */ diff --git a/arch/um/os-Linux/mem.c b/arch/um/os-Linux/mem.c index 8e71edaaf80..9d7d69a523b 100644 --- a/arch/um/os-Linux/mem.c +++ b/arch/um/os-Linux/mem.c @@ -88,7 +88,7 @@ int make_tempfile(const char *template, char **out_tempname, int do_unlink) * This proc is used in start_up.c * So it isn't 'static'. */ -int create_tmp_file(unsigned long len) +int create_tmp_file(unsigned long long len) { int fd, err; char zero; @@ -121,7 +121,7 @@ int create_tmp_file(unsigned long len) return(fd); } -static int create_anon_file(unsigned long len) +static int create_anon_file(unsigned long long len) { void *addr; int fd; @@ -144,7 +144,7 @@ static int create_anon_file(unsigned long len) extern int have_devanon; -int create_mem_file(unsigned long len) +int create_mem_file(unsigned long long len) { int err, fd; diff --git a/arch/um/os-Linux/start_up.c b/arch/um/os-Linux/start_up.c index b99ab414542..37517d49c4a 100644 --- a/arch/um/os-Linux/start_up.c +++ b/arch/um/os-Linux/start_up.c @@ -135,7 +135,9 @@ static int stop_ptraced_child(int pid, void *stack, int exitcode, } int ptrace_faultinfo = 1; +int ptrace_ldt = 1; int proc_mm = 1; +int skas_needs_stub = 0; static int __init skas0_cmd_param(char *str, int* add) { @@ -294,7 +296,7 @@ static void __init check_ptrace(void) check_sysemu(); } -extern int create_tmp_file(unsigned long len); +extern int create_tmp_file(unsigned long long len); static void check_tmpexec(void) { @@ -352,14 +354,26 @@ __uml_setup("noptracefaultinfo", noptracefaultinfo_cmd_param, " it. To support PTRACE_FAULTINFO, the host needs to be patched\n" " using the current skas3 patch.\n\n"); +static int __init noptraceldt_cmd_param(char *str, int* add) +{ + ptrace_ldt = 0; + return 0; +} + +__uml_setup("noptraceldt", noptraceldt_cmd_param, +"noptraceldt\n" +" Turns off usage of PTRACE_LDT, even if host supports it.\n" +" To support PTRACE_LDT, the host needs to be patched using\n" +" the current skas3 patch.\n\n"); + #ifdef UML_CONFIG_MODE_SKAS -static inline void check_skas3_ptrace_support(void) +static inline void check_skas3_ptrace_faultinfo(void) { struct ptrace_faultinfo fi; void *stack; int pid, n; - printf("Checking for the skas3 patch in the host..."); + printf(" - PTRACE_FAULTINFO..."); pid = start_ptraced_child(&stack); n = ptrace(PTRACE_FAULTINFO, pid, 0, &fi); @@ -381,9 +395,49 @@ static inline void check_skas3_ptrace_support(void) stop_ptraced_child(pid, stack, 1, 1); } -int can_do_skas(void) +static inline void check_skas3_ptrace_ldt(void) +{ +#ifdef PTRACE_LDT + void *stack; + int pid, n; + unsigned char ldtbuf[40]; + struct ptrace_ldt ldt_op = (struct ptrace_ldt) { + .func = 2, /* read default ldt */ + .ptr = ldtbuf, + .bytecount = sizeof(ldtbuf)}; + + printf(" - PTRACE_LDT..."); + pid = start_ptraced_child(&stack); + + n = ptrace(PTRACE_LDT, pid, 0, (unsigned long) &ldt_op); + if (n < 0) { + if(errno == EIO) + printf("not found\n"); + else { + perror("not found"); + } + ptrace_ldt = 0; + } + else { + if(ptrace_ldt) + printf("found\n"); + else + printf("found, but use is disabled\n"); + } + + stop_ptraced_child(pid, stack, 1, 1); +#else + /* PTRACE_LDT might be disabled via cmdline option. + * We want to override this, else we might use the stub + * without real need + */ + ptrace_ldt = 1; +#endif +} + +static inline void check_skas3_proc_mm(void) { - printf("Checking for /proc/mm..."); + printf(" - /proc/mm..."); if (os_access("/proc/mm", OS_ACC_W_OK) < 0) { proc_mm = 0; printf("not found\n"); @@ -394,8 +448,19 @@ int can_do_skas(void) else printf("found\n"); } +} + +int can_do_skas(void) +{ + printf("Checking for the skas3 patch in the host:\n"); + + check_skas3_proc_mm(); + check_skas3_ptrace_faultinfo(); + check_skas3_ptrace_ldt(); + + if(!proc_mm || !ptrace_faultinfo || !ptrace_ldt) + skas_needs_stub = 1; - check_skas3_ptrace_support(); return 1; } #else diff --git a/arch/um/os-Linux/uaccess.c b/arch/um/os-Linux/uaccess.c new file mode 100644 index 00000000000..38d710158c3 --- /dev/null +++ b/arch/um/os-Linux/uaccess.c @@ -0,0 +1,32 @@ +/* + * Copyright (C) 2001 Chris Emerson (cemerson@chiark.greenend.org.uk) + * Copyright (C) 2001, 2002 Jeff Dike (jdike@karaya.com) + * Licensed under the GPL + */ + +#include <setjmp.h> +#include <string.h> + +unsigned long __do_user_copy(void *to, const void *from, int n, + void **fault_addr, void **fault_catcher, + void (*op)(void *to, const void *from, + int n), int *faulted_out) +{ + unsigned long *faddrp = (unsigned long *) fault_addr, ret; + + sigjmp_buf jbuf; + *fault_catcher = &jbuf; + if(sigsetjmp(jbuf, 1) == 0){ + (*op)(to, from, n); + ret = 0; + *faulted_out = 0; + } + else { + ret = *faddrp; + *faulted_out = 1; + } + *fault_addr = NULL; + *fault_catcher = NULL; + return ret; +} + diff --git a/arch/um/scripts/Makefile.rules b/arch/um/scripts/Makefile.rules index 651d9d88b65..b3fbf125709 100644 --- a/arch/um/scripts/Makefile.rules +++ b/arch/um/scripts/Makefile.rules @@ -26,8 +26,13 @@ define unprofile $(patsubst -pg,,$(patsubst -fprofile-arcs -ftest-coverage,,$(1))) endef +# cmd_make_link checks to see if the $(foo-dir) variable starts with a /. If +# so, it's considered to be a path relative to $(srcdir) rather than +# $(srcdir)/arch/$(SUBARCH). This is because x86_64 wants to get ldt.c from +# arch/um/sys-i386 rather than arch/i386 like the other borrowed files. So, +# it sets $(ldt.c-dir) to /arch/um/sys-i386. quiet_cmd_make_link = SYMLINK $@ -cmd_make_link = ln -sf $(srctree)/arch/$(SUBARCH)/$($(notdir $@)-dir)/$(notdir $@) $@ +cmd_make_link = rm -f $@; ln -sf $(srctree)$(if $(filter-out /%,$($(notdir $@)-dir)),/arch/$(SUBARCH))/$($(notdir $@)-dir)/$(notdir $@) $@ # this needs to be before the foreach, because targets does not accept # complete paths like $(obj)/$(f). To make sure this works, use a := assignment diff --git a/arch/um/sys-i386/ldt.c b/arch/um/sys-i386/ldt.c index 36b5c2c1328..6360f1c958d 100644 --- a/arch/um/sys-i386/ldt.c +++ b/arch/um/sys-i386/ldt.c @@ -3,53 +3,26 @@ * Licensed under the GPL */ +#include "linux/stddef.h" #include "linux/config.h" #include "linux/sched.h" #include "linux/slab.h" #include "linux/types.h" +#include "linux/errno.h" #include "asm/uaccess.h" -#include "asm/ptrace.h" #include "asm/smp.h" #include "asm/ldt.h" +#include "asm/unistd.h" #include "choose-mode.h" #include "kern.h" #include "mode_kern.h" -#ifdef CONFIG_MODE_TT - extern int modify_ldt(int func, void *ptr, unsigned long bytecount); -static int do_modify_ldt_tt(int func, void *ptr, unsigned long bytecount) -{ - return modify_ldt(func, ptr, bytecount); -} - -#endif - -#ifdef CONFIG_MODE_SKAS - -#include "skas.h" -#include "skas_ptrace.h" - -static int do_modify_ldt_skas(int func, void *ptr, unsigned long bytecount) -{ - struct ptrace_ldt ldt; - u32 cpu; - int res; - - ldt = ((struct ptrace_ldt) { .func = func, - .ptr = ptr, - .bytecount = bytecount }); - - cpu = get_cpu(); - res = ptrace(PTRACE_LDT, userspace_pid[cpu], 0, (unsigned long) &ldt); - put_cpu(); - - return res; -} -#endif +#ifdef CONFIG_MODE_TT -int sys_modify_ldt(int func, void __user *ptr, unsigned long bytecount) +static long do_modify_ldt_tt(int func, void __user *ptr, + unsigned long bytecount) { struct user_desc info; int res = 0; @@ -89,8 +62,7 @@ int sys_modify_ldt(int func, void __user *ptr, unsigned long bytecount) goto out; } - res = CHOOSE_MODE_PROC(do_modify_ldt_tt, do_modify_ldt_skas, func, - p, bytecount); + res = modify_ldt(func, p, bytecount); if(res < 0) goto out; @@ -108,3 +80,467 @@ out: kfree(buf); return res; } + +#endif + +#ifdef CONFIG_MODE_SKAS + +#include "skas.h" +#include "skas_ptrace.h" +#include "asm/mmu_context.h" + +long write_ldt_entry(struct mm_id * mm_idp, int func, struct user_desc * desc, + void **addr, int done) +{ + long res; + + if(proc_mm){ + /* This is a special handling for the case, that the mm to + * modify isn't current->active_mm. + * If this is called directly by modify_ldt, + * (current->active_mm->context.skas.u == mm_idp) + * will be true. So no call to switch_mm_skas(mm_idp) is done. + * If this is called in case of init_new_ldt or PTRACE_LDT, + * mm_idp won't belong to current->active_mm, but child->mm. + * So we need to switch child's mm into our userspace, then + * later switch back. + * + * Note: I'm unshure: should interrupts be disabled here? + */ + if(!current->active_mm || current->active_mm == &init_mm || + mm_idp != ¤t->active_mm->context.skas.id) + switch_mm_skas(mm_idp); + } + + if(ptrace_ldt) { + struct ptrace_ldt ldt_op = (struct ptrace_ldt) { + .func = func, + .ptr = desc, + .bytecount = sizeof(*desc)}; + u32 cpu; + int pid; + + if(!proc_mm) + pid = mm_idp->u.pid; + else { + cpu = get_cpu(); + pid = userspace_pid[cpu]; + } + + res = ptrace(PTRACE_LDT, pid, 0, (unsigned long) &ldt_op); + if(res) + res = errno; + + if(proc_mm) + put_cpu(); + } + else { + void *stub_addr; + res = syscall_stub_data(mm_idp, (unsigned long *)desc, + (sizeof(*desc) + sizeof(long) - 1) & + ~(sizeof(long) - 1), + addr, &stub_addr); + if(!res){ + unsigned long args[] = { func, + (unsigned long)stub_addr, + sizeof(*desc), + 0, 0, 0 }; + res = run_syscall_stub(mm_idp, __NR_modify_ldt, args, + 0, addr, done); + } + } + + if(proc_mm){ + /* This is the second part of special handling, that makes + * PTRACE_LDT possible to implement. + */ + if(current->active_mm && current->active_mm != &init_mm && + mm_idp != ¤t->active_mm->context.skas.id) + switch_mm_skas(¤t->active_mm->context.skas.id); + } + + return res; +} + +static long read_ldt_from_host(void __user * ptr, unsigned long bytecount) +{ + int res, n; + struct ptrace_ldt ptrace_ldt = (struct ptrace_ldt) { + .func = 0, + .bytecount = bytecount, + .ptr = (void *)kmalloc(bytecount, GFP_KERNEL)}; + u32 cpu; + + if(ptrace_ldt.ptr == NULL) + return -ENOMEM; + + /* This is called from sys_modify_ldt only, so userspace_pid gives + * us the right number + */ + + cpu = get_cpu(); + res = ptrace(PTRACE_LDT, userspace_pid[cpu], 0, + (unsigned long) &ptrace_ldt); + put_cpu(); + if(res < 0) + goto out; + + n = copy_to_user(ptr, ptrace_ldt.ptr, res); + if(n != 0) + res = -EFAULT; + + out: + kfree(ptrace_ldt.ptr); + + return res; +} + +/* + * In skas mode, we hold our own ldt data in UML. + * Thus, the code implementing sys_modify_ldt_skas + * is very similar to (and mostly stolen from) sys_modify_ldt + * for arch/i386/kernel/ldt.c + * The routines copied and modified in part are: + * - read_ldt + * - read_default_ldt + * - write_ldt + * - sys_modify_ldt_skas + */ + +static int read_ldt(void __user * ptr, unsigned long bytecount) +{ + int i, err = 0; + unsigned long size; + uml_ldt_t * ldt = ¤t->mm->context.skas.ldt; + + if(!ldt->entry_count) + goto out; + if(bytecount > LDT_ENTRY_SIZE*LDT_ENTRIES) + bytecount = LDT_ENTRY_SIZE*LDT_ENTRIES; + err = bytecount; + + if(ptrace_ldt){ + return read_ldt_from_host(ptr, bytecount); + } + + down(&ldt->semaphore); + if(ldt->entry_count <= LDT_DIRECT_ENTRIES){ + size = LDT_ENTRY_SIZE*LDT_DIRECT_ENTRIES; + if(size > bytecount) + size = bytecount; + if(copy_to_user(ptr, ldt->entries, size)) + err = -EFAULT; + bytecount -= size; + ptr += size; + } + else { + for(i=0; i<ldt->entry_count/LDT_ENTRIES_PER_PAGE && bytecount; + i++){ + size = PAGE_SIZE; + if(size > bytecount) + size = bytecount; + if(copy_to_user(ptr, ldt->pages[i], size)){ + err = -EFAULT; + break; + } + bytecount -= size; + ptr += size; + } + } + up(&ldt->semaphore); + + if(bytecount == 0 || err == -EFAULT) + goto out; + + if(clear_user(ptr, bytecount)) + err = -EFAULT; + +out: + return err; +} + +static int read_default_ldt(void __user * ptr, unsigned long bytecount) +{ + int err; + + if(bytecount > 5*LDT_ENTRY_SIZE) + bytecount = 5*LDT_ENTRY_SIZE; + + err = bytecount; + /* UML doesn't support lcall7 and lcall27. + * So, we don't really have a default ldt, but emulate + * an empty ldt of common host default ldt size. + */ + if(clear_user(ptr, bytecount)) + err = -EFAULT; + + return err; +} + +static int write_ldt(void __user * ptr, unsigned long bytecount, int func) +{ + uml_ldt_t * ldt = ¤t->mm->context.skas.ldt; + struct mm_id * mm_idp = ¤t->mm->context.skas.id; + int i, err; + struct user_desc ldt_info; + struct ldt_entry entry0, *ldt_p; + void *addr = NULL; + + err = -EINVAL; + if(bytecount != sizeof(ldt_info)) + goto out; + err = -EFAULT; + if(copy_from_user(&ldt_info, ptr, sizeof(ldt_info))) + goto out; + + err = -EINVAL; + if(ldt_info.entry_number >= LDT_ENTRIES) + goto out; + if(ldt_info.contents == 3){ + if (func == 1) + goto out; + if (ldt_info.seg_not_present == 0) + goto out; + } + + if(!ptrace_ldt) + down(&ldt->semaphore); + + err = write_ldt_entry(mm_idp, func, &ldt_info, &addr, 1); + if(err) + goto out_unlock; + else if(ptrace_ldt) { + /* With PTRACE_LDT available, this is used as a flag only */ + ldt->entry_count = 1; + goto out; + } + + if(ldt_info.entry_number >= ldt->entry_count && + ldt_info.entry_number >= LDT_DIRECT_ENTRIES){ + for(i=ldt->entry_count/LDT_ENTRIES_PER_PAGE; + i*LDT_ENTRIES_PER_PAGE <= ldt_info.entry_number; + i++){ + if(i == 0) + memcpy(&entry0, ldt->entries, sizeof(entry0)); + ldt->pages[i] = (struct ldt_entry *) + __get_free_page(GFP_KERNEL|__GFP_ZERO); + if(!ldt->pages[i]){ + err = -ENOMEM; + /* Undo the change in host */ + memset(&ldt_info, 0, sizeof(ldt_info)); + write_ldt_entry(mm_idp, 1, &ldt_info, &addr, 1); + goto out_unlock; + } + if(i == 0) { + memcpy(ldt->pages[0], &entry0, sizeof(entry0)); + memcpy(ldt->pages[0]+1, ldt->entries+1, + sizeof(entry0)*(LDT_DIRECT_ENTRIES-1)); + } + ldt->entry_count = (i + 1) * LDT_ENTRIES_PER_PAGE; + } + } + if(ldt->entry_count <= ldt_info.entry_number) + ldt->entry_count = ldt_info.entry_number + 1; + + if(ldt->entry_count <= LDT_DIRECT_ENTRIES) + ldt_p = ldt->entries + ldt_info.entry_number; + else + ldt_p = ldt->pages[ldt_info.entry_number/LDT_ENTRIES_PER_PAGE] + + ldt_info.entry_number%LDT_ENTRIES_PER_PAGE; + + if(ldt_info.base_addr == 0 && ldt_info.limit == 0 && + (func == 1 || LDT_empty(&ldt_info))){ + ldt_p->a = 0; + ldt_p->b = 0; + } + else{ + if (func == 1) + ldt_info.useable = 0; + ldt_p->a = LDT_entry_a(&ldt_info); + ldt_p->b = LDT_entry_b(&ldt_info); + } + err = 0; + +out_unlock: + up(&ldt->semaphore); +out: + return err; +} + +static long do_modify_ldt_skas(int func, void __user *ptr, + unsigned long bytecount) +{ + int ret = -ENOSYS; + + switch (func) { + case 0: + ret = read_ldt(ptr, bytecount); + break; + case 1: + case 0x11: + ret = write_ldt(ptr, bytecount, func); + break; + case 2: + ret = read_default_ldt(ptr, bytecount); + break; + } + return ret; +} + +short dummy_list[9] = {0, -1}; +short * host_ldt_entries = NULL; + +void ldt_get_host_info(void) +{ + long ret; + struct ldt_entry * ldt; + int i, size, k, order; + + host_ldt_entries = dummy_list+1; + + for(i = LDT_PAGES_MAX-1, order=0; i; i>>=1, order++); + + ldt = (struct ldt_entry *) + __get_free_pages(GFP_KERNEL|__GFP_ZERO, order); + if(ldt == NULL) { + printk("ldt_get_host_info: couldn't allocate buffer for host ldt\n"); + return; + } + + ret = modify_ldt(0, ldt, (1<<order)*PAGE_SIZE); + if(ret < 0) { + printk("ldt_get_host_info: couldn't read host ldt\n"); + goto out_free; + } + if(ret == 0) { + /* default_ldt is active, simply write an empty entry 0 */ + host_ldt_entries = dummy_list; + goto out_free; + } + + for(i=0, size=0; i<ret/LDT_ENTRY_SIZE; i++){ + if(ldt[i].a != 0 || ldt[i].b != 0) + size++; + } + + if(size < sizeof(dummy_list)/sizeof(dummy_list[0])) { + host_ldt_entries = dummy_list; + } + else { + size = (size + 1) * sizeof(dummy_list[0]); + host_ldt_entries = (short *)kmalloc(size, GFP_KERNEL); + if(host_ldt_entries == NULL) { + printk("ldt_get_host_info: couldn't allocate host ldt list\n"); + goto out_free; + } + } + + for(i=0, k=0; i<ret/LDT_ENTRY_SIZE; i++){ + if(ldt[i].a != 0 || ldt[i].b != 0) { + host_ldt_entries[k++] = i; + } + } + host_ldt_entries[k] = -1; + +out_free: + free_pages((unsigned long)ldt, order); +} + +long init_new_ldt(struct mmu_context_skas * new_mm, + struct mmu_context_skas * from_mm) +{ + struct user_desc desc; + short * num_p; + int i; + long page, err=0; + void *addr = NULL; + + memset(&desc, 0, sizeof(desc)); + + if(!ptrace_ldt) + init_MUTEX(&new_mm->ldt.semaphore); + + if(!from_mm){ + /* + * We have to initialize a clean ldt. + */ + if(proc_mm) { + /* + * If the new mm was created using proc_mm, host's + * default-ldt currently is assigned, which normally + * contains the call-gates for lcall7 and lcall27. + * To remove these gates, we simply write an empty + * entry as number 0 to the host. + */ + err = write_ldt_entry(&new_mm->id, 1, &desc, + &addr, 1); + } + else{ + /* + * Now we try to retrieve info about the ldt, we + * inherited from the host. All ldt-entries found + * will be reset in the following loop + */ + if(host_ldt_entries == NULL) + ldt_get_host_info(); + for(num_p=host_ldt_entries; *num_p != -1; num_p++){ + desc.entry_number = *num_p; + err = write_ldt_entry(&new_mm->id, 1, &desc, + &addr, *(num_p + 1) == -1); + if(err) + break; + } + } + new_mm->ldt.entry_count = 0; + } + else if (!ptrace_ldt) { + /* Our local LDT is used to supply the data for + * modify_ldt(READLDT), if PTRACE_LDT isn't available, + * i.e., we have to use the stub for modify_ldt, which + * can't handle the big read buffer of up to 64kB. + */ + down(&from_mm->ldt.semaphore); + if(from_mm->ldt.entry_count <= LDT_DIRECT_ENTRIES){ + memcpy(new_mm->ldt.entries, from_mm->ldt.entries, + sizeof(new_mm->ldt.entries)); + } + else{ + i = from_mm->ldt.entry_count / LDT_ENTRIES_PER_PAGE; + while(i-->0){ + page = __get_free_page(GFP_KERNEL|__GFP_ZERO); + if (!page){ + err = -ENOMEM; + break; + } + new_mm->ldt.pages[i] = (struct ldt_entry*)page; + memcpy(new_mm->ldt.pages[i], + from_mm->ldt.pages[i], PAGE_SIZE); + } + } + new_mm->ldt.entry_count = from_mm->ldt.entry_count; + up(&from_mm->ldt.semaphore); + } + + return err; +} + + +void free_ldt(struct mmu_context_skas * mm) +{ + int i; + + if(!ptrace_ldt && mm->ldt.entry_count > LDT_DIRECT_ENTRIES){ + i = mm->ldt.entry_count / LDT_ENTRIES_PER_PAGE; + while(i-- > 0){ + free_page((long )mm->ldt.pages[i]); + } + } + mm->ldt.entry_count = 0; +} +#endif + +int sys_modify_ldt(int func, void __user *ptr, unsigned long bytecount) +{ + return(CHOOSE_MODE_PROC(do_modify_ldt_tt, do_modify_ldt_skas, func, + ptr, bytecount)); +} diff --git a/arch/um/sys-x86_64/Makefile b/arch/um/sys-x86_64/Makefile index 06c3633457a..ea977df395a 100644 --- a/arch/um/sys-x86_64/Makefile +++ b/arch/um/sys-x86_64/Makefile @@ -5,7 +5,7 @@ # #XXX: why into lib-y? -lib-y = bitops.o bugs.o csum-partial.o delay.o fault.o mem.o memcpy.o \ +lib-y = bitops.o bugs.o csum-partial.o delay.o fault.o ldt.o mem.o memcpy.o \ ptrace.o ptrace_user.o sigcontext.o signal.o stub.o \ stub_segv.o syscalls.o syscall_table.o sysrq.o thunk.o @@ -14,7 +14,7 @@ obj-$(CONFIG_MODULES) += module.o um_module.o USER_OBJS := ptrace_user.o sigcontext.o -SYMLINKS = bitops.c csum-copy.S csum-partial.c csum-wrappers.c memcpy.S \ +SYMLINKS = bitops.c csum-copy.S csum-partial.c csum-wrappers.c ldt.c memcpy.S \ thunk.S module.c include arch/um/scripts/Makefile.rules @@ -23,6 +23,7 @@ bitops.c-dir = lib csum-copy.S-dir = lib csum-partial.c-dir = lib csum-wrappers.c-dir = lib +ldt.c-dir = /arch/um/sys-i386 memcpy.S-dir = lib thunk.S-dir = lib module.c-dir = kernel diff --git a/arch/um/sys-x86_64/syscalls.c b/arch/um/sys-x86_64/syscalls.c index 3259a4db453..6acee5c4ada 100644 --- a/arch/um/sys-x86_64/syscalls.c +++ b/arch/um/sys-x86_64/syscalls.c @@ -29,81 +29,6 @@ asmlinkage long sys_uname64(struct new_utsname __user * name) } #ifdef CONFIG_MODE_TT -extern int modify_ldt(int func, void *ptr, unsigned long bytecount); - -long sys_modify_ldt_tt(int func, void *ptr, unsigned long bytecount) -{ - /* XXX This should check VERIFY_WRITE depending on func, check this - * in i386 as well. - */ - if (!access_ok(VERIFY_READ, ptr, bytecount)) - return -EFAULT; - return(modify_ldt(func, ptr, bytecount)); -} -#endif - -#ifdef CONFIG_MODE_SKAS -extern int userspace_pid[]; - -#include "skas_ptrace.h" - -long sys_modify_ldt_skas(int func, void *ptr, unsigned long bytecount) -{ - struct ptrace_ldt ldt; - void *buf; - int res, n; - - buf = kmalloc(bytecount, GFP_KERNEL); - if(buf == NULL) - return(-ENOMEM); - - res = 0; - - switch(func){ - case 1: - case 0x11: - res = copy_from_user(buf, ptr, bytecount); - break; - } - - if(res != 0){ - res = -EFAULT; - goto out; - } - - ldt = ((struct ptrace_ldt) { .func = func, - .ptr = buf, - .bytecount = bytecount }); -#warning Need to look up userspace_pid by cpu - res = ptrace(PTRACE_LDT, userspace_pid[0], 0, (unsigned long) &ldt); - if(res < 0) - goto out; - - switch(func){ - case 0: - case 2: - n = res; - res = copy_to_user(ptr, buf, n); - if(res != 0) - res = -EFAULT; - else - res = n; - break; - } - - out: - kfree(buf); - return(res); -} -#endif - -long sys_modify_ldt(int func, void *ptr, unsigned long bytecount) -{ - return(CHOOSE_MODE_PROC(sys_modify_ldt_tt, sys_modify_ldt_skas, func, - ptr, bytecount)); -} - -#ifdef CONFIG_MODE_TT extern long arch_prctl(int code, unsigned long addr); static long arch_prctl_tt(int code, unsigned long addr) diff --git a/arch/v850/kernel/ptrace.c b/arch/v850/kernel/ptrace.c index d6077ff47d2..18492d02aaf 100644 --- a/arch/v850/kernel/ptrace.c +++ b/arch/v850/kernel/ptrace.c @@ -113,45 +113,10 @@ static int set_single_step (struct task_struct *t, int val) return 1; } -long sys_ptrace(long request, long pid, long addr, long data) +long arch_ptrace(struct task_struct *child, long request, long addr, long data) { - struct task_struct *child; int rval; - lock_kernel(); - - if (request == PTRACE_TRACEME) { - /* are we already being traced? */ - if (current->ptrace & PT_PTRACED) { - rval = -EPERM; - goto out; - } - /* set the ptrace bit in the process flags. */ - current->ptrace |= PT_PTRACED; - rval = 0; - goto out; - } - rval = -ESRCH; - read_lock(&tasklist_lock); - child = find_task_by_pid(pid); - if (child) - get_task_struct(child); - read_unlock(&tasklist_lock); - if (!child) - goto out; - - rval = -EPERM; - if (pid == 1) /* you may not mess with init */ - goto out_tsk; - - if (request == PTRACE_ATTACH) { - rval = ptrace_attach(child); - goto out_tsk; - } - rval = ptrace_check_attach(child, request == PTRACE_KILL); - if (rval < 0) - goto out_tsk; - switch (request) { unsigned long val, copied; @@ -248,11 +213,7 @@ long sys_ptrace(long request, long pid, long addr, long data) rval = -EIO; goto out; } - -out_tsk: - put_task_struct(child); -out: - unlock_kernel(); + out: return rval; } diff --git a/arch/x86_64/Kconfig b/arch/x86_64/Kconfig index 21afa69a086..4cce2f6f170 100644 --- a/arch/x86_64/Kconfig +++ b/arch/x86_64/Kconfig @@ -532,8 +532,21 @@ source "drivers/firmware/Kconfig" source fs/Kconfig +menu "Instrumentation Support" + depends on EXPERIMENTAL + source "arch/x86_64/oprofile/Kconfig" +config KPROBES + bool "Kprobes (EXPERIMENTAL)" + help + Kprobes allows you to trap at almost any kernel address and + execute a callback function. register_kprobe() establishes + a probepoint and specifies the callback. Kprobes is useful + for kernel debugging, non-intrusive instrumentation and testing. + If in doubt, say "N". +endmenu + source "arch/x86_64/Kconfig.debug" source "security/Kconfig" diff --git a/arch/x86_64/Kconfig.debug b/arch/x86_64/Kconfig.debug index 9cf1410d2f5..d584ecc27ea 100644 --- a/arch/x86_64/Kconfig.debug +++ b/arch/x86_64/Kconfig.debug @@ -33,16 +33,6 @@ config IOMMU_DEBUG options. See Documentation/x86_64/boot-options.txt for more details. -config KPROBES - bool "Kprobes" - depends on DEBUG_KERNEL - help - Kprobes allows you to trap at almost any kernel address and - execute a callback function. register_kprobe() establishes - a probepoint and specifies the callback. Kprobes is useful - for kernel debugging, non-intrusive instrumentation and testing. - If in doubt, say "N". - config IOMMU_LEAK bool "IOMMU leak tracing" depends on DEBUG_KERNEL diff --git a/arch/x86_64/kernel/kprobes.c b/arch/x86_64/kernel/kprobes.c index 76a28b007be..dddeb678b44 100644 --- a/arch/x86_64/kernel/kprobes.c +++ b/arch/x86_64/kernel/kprobes.c @@ -34,7 +34,6 @@ #include <linux/config.h> #include <linux/kprobes.h> #include <linux/ptrace.h> -#include <linux/spinlock.h> #include <linux/string.h> #include <linux/slab.h> #include <linux/preempt.h> @@ -44,17 +43,10 @@ #include <asm/kdebug.h> static DECLARE_MUTEX(kprobe_mutex); - -static struct kprobe *current_kprobe; -static unsigned long kprobe_status, kprobe_old_rflags, kprobe_saved_rflags; -static struct kprobe *kprobe_prev; -static unsigned long kprobe_status_prev, kprobe_old_rflags_prev, kprobe_saved_rflags_prev; -static struct pt_regs jprobe_saved_regs; -static long *jprobe_saved_rsp; void jprobe_return_end(void); -/* copy of the kernel stack at the probe fire time */ -static kprobe_opcode_t jprobes_stack[MAX_STACK_SIZE]; +DEFINE_PER_CPU(struct kprobe *, current_kprobe) = NULL; +DEFINE_PER_CPU(struct kprobe_ctlblk, kprobe_ctlblk); /* * returns non-zero if opcode modifies the interrupt flag. @@ -236,29 +228,30 @@ void __kprobes arch_remove_kprobe(struct kprobe *p) up(&kprobe_mutex); } -static inline void save_previous_kprobe(void) +static inline void save_previous_kprobe(struct kprobe_ctlblk *kcb) { - kprobe_prev = current_kprobe; - kprobe_status_prev = kprobe_status; - kprobe_old_rflags_prev = kprobe_old_rflags; - kprobe_saved_rflags_prev = kprobe_saved_rflags; + kcb->prev_kprobe.kp = kprobe_running(); + kcb->prev_kprobe.status = kcb->kprobe_status; + kcb->prev_kprobe.old_rflags = kcb->kprobe_old_rflags; + kcb->prev_kprobe.saved_rflags = kcb->kprobe_saved_rflags; } -static inline void restore_previous_kprobe(void) +static inline void restore_previous_kprobe(struct kprobe_ctlblk *kcb) { - current_kprobe = kprobe_prev; - kprobe_status = kprobe_status_prev; - kprobe_old_rflags = kprobe_old_rflags_prev; - kprobe_saved_rflags = kprobe_saved_rflags_prev; + __get_cpu_var(current_kprobe) = kcb->prev_kprobe.kp; + kcb->kprobe_status = kcb->prev_kprobe.status; + kcb->kprobe_old_rflags = kcb->prev_kprobe.old_rflags; + kcb->kprobe_saved_rflags = kcb->prev_kprobe.saved_rflags; } -static inline void set_current_kprobe(struct kprobe *p, struct pt_regs *regs) +static inline void set_current_kprobe(struct kprobe *p, struct pt_regs *regs, + struct kprobe_ctlblk *kcb) { - current_kprobe = p; - kprobe_saved_rflags = kprobe_old_rflags + __get_cpu_var(current_kprobe) = p; + kcb->kprobe_saved_rflags = kcb->kprobe_old_rflags = (regs->eflags & (TF_MASK | IF_MASK)); if (is_IF_modifier(p->ainsn.insn)) - kprobe_saved_rflags &= ~IF_MASK; + kcb->kprobe_saved_rflags &= ~IF_MASK; } static void __kprobes prepare_singlestep(struct kprobe *p, struct pt_regs *regs) @@ -272,6 +265,7 @@ static void __kprobes prepare_singlestep(struct kprobe *p, struct pt_regs *regs) regs->rip = (unsigned long)p->ainsn.insn; } +/* Called with kretprobe_lock held */ void __kprobes arch_prepare_kretprobe(struct kretprobe *rp, struct pt_regs *regs) { @@ -292,32 +286,30 @@ void __kprobes arch_prepare_kretprobe(struct kretprobe *rp, } } -/* - * Interrupts are disabled on entry as trap3 is an interrupt gate and they - * remain disabled thorough out this function. - */ int __kprobes kprobe_handler(struct pt_regs *regs) { struct kprobe *p; int ret = 0; kprobe_opcode_t *addr = (kprobe_opcode_t *)(regs->rip - sizeof(kprobe_opcode_t)); + struct kprobe_ctlblk *kcb; - /* We're in an interrupt, but this is clear and BUG()-safe. */ + /* + * We don't want to be preempted for the entire + * duration of kprobe processing + */ preempt_disable(); + kcb = get_kprobe_ctlblk(); /* Check we're not actually recursing */ if (kprobe_running()) { - /* We *are* holding lock here, so this is safe. - Disarm the probe we just hit, and ignore it. */ p = get_kprobe(addr); if (p) { - if (kprobe_status == KPROBE_HIT_SS && + if (kcb->kprobe_status == KPROBE_HIT_SS && *p->ainsn.insn == BREAKPOINT_INSTRUCTION) { regs->eflags &= ~TF_MASK; - regs->eflags |= kprobe_saved_rflags; - unlock_kprobes(); + regs->eflags |= kcb->kprobe_saved_rflags; goto no_kprobe; - } else if (kprobe_status == KPROBE_HIT_SSDONE) { + } else if (kcb->kprobe_status == KPROBE_HIT_SSDONE) { /* TODO: Provide re-entrancy from * post_kprobes_handler() and avoid exception * stack corruption while single-stepping on @@ -325,6 +317,7 @@ int __kprobes kprobe_handler(struct pt_regs *regs) */ arch_disarm_kprobe(p); regs->rip = (unsigned long)p->addr; + reset_current_kprobe(); ret = 1; } else { /* We have reentered the kprobe_handler(), since @@ -334,27 +327,24 @@ int __kprobes kprobe_handler(struct pt_regs *regs) * of the new probe without calling any user * handlers. */ - save_previous_kprobe(); - set_current_kprobe(p, regs); + save_previous_kprobe(kcb); + set_current_kprobe(p, regs, kcb); p->nmissed++; prepare_singlestep(p, regs); - kprobe_status = KPROBE_REENTER; + kcb->kprobe_status = KPROBE_REENTER; return 1; } } else { - p = current_kprobe; + p = __get_cpu_var(current_kprobe); if (p->break_handler && p->break_handler(p, regs)) { goto ss_probe; } } - /* If it's not ours, can't be delete race, (we hold lock). */ goto no_kprobe; } - lock_kprobes(); p = get_kprobe(addr); if (!p) { - unlock_kprobes(); if (*addr != BREAKPOINT_INSTRUCTION) { /* * The breakpoint instruction was removed right @@ -372,8 +362,8 @@ int __kprobes kprobe_handler(struct pt_regs *regs) goto no_kprobe; } - kprobe_status = KPROBE_HIT_ACTIVE; - set_current_kprobe(p, regs); + set_current_kprobe(p, regs, kcb); + kcb->kprobe_status = KPROBE_HIT_ACTIVE; if (p->pre_handler && p->pre_handler(p, regs)) /* handler has already set things up, so skip ss setup */ @@ -381,7 +371,7 @@ int __kprobes kprobe_handler(struct pt_regs *regs) ss_probe: prepare_singlestep(p, regs); - kprobe_status = KPROBE_HIT_SS; + kcb->kprobe_status = KPROBE_HIT_SS; return 1; no_kprobe: @@ -409,9 +399,10 @@ int __kprobes trampoline_probe_handler(struct kprobe *p, struct pt_regs *regs) struct kretprobe_instance *ri = NULL; struct hlist_head *head; struct hlist_node *node, *tmp; - unsigned long orig_ret_address = 0; + unsigned long flags, orig_ret_address = 0; unsigned long trampoline_address =(unsigned long)&kretprobe_trampoline; + spin_lock_irqsave(&kretprobe_lock, flags); head = kretprobe_inst_table_head(current); /* @@ -450,13 +441,14 @@ int __kprobes trampoline_probe_handler(struct kprobe *p, struct pt_regs *regs) BUG_ON(!orig_ret_address || (orig_ret_address == trampoline_address)); regs->rip = orig_ret_address; - unlock_kprobes(); + reset_current_kprobe(); + spin_unlock_irqrestore(&kretprobe_lock, flags); preempt_enable_no_resched(); /* * By returning a non-zero value, we are telling - * kprobe_handler() that we have handled unlocking - * and re-enabling preemption. + * kprobe_handler() that we don't want the post_handler + * to run (and have re-enabled preemption) */ return 1; } @@ -483,7 +475,8 @@ int __kprobes trampoline_probe_handler(struct kprobe *p, struct pt_regs *regs) * that is atop the stack is the address following the copied instruction. * We need to make it the address following the original instruction. */ -static void __kprobes resume_execution(struct kprobe *p, struct pt_regs *regs) +static void __kprobes resume_execution(struct kprobe *p, + struct pt_regs *regs, struct kprobe_ctlblk *kcb) { unsigned long *tos = (unsigned long *)regs->rsp; unsigned long next_rip = 0; @@ -498,7 +491,7 @@ static void __kprobes resume_execution(struct kprobe *p, struct pt_regs *regs) switch (*insn) { case 0x9c: /* pushfl */ *tos &= ~(TF_MASK | IF_MASK); - *tos |= kprobe_old_rflags; + *tos |= kcb->kprobe_old_rflags; break; case 0xc3: /* ret/lret */ case 0xcb: @@ -537,30 +530,28 @@ static void __kprobes resume_execution(struct kprobe *p, struct pt_regs *regs) } } -/* - * Interrupts are disabled on entry as trap1 is an interrupt gate and they - * remain disabled thoroughout this function. And we hold kprobe lock. - */ int __kprobes post_kprobe_handler(struct pt_regs *regs) { - if (!kprobe_running()) + struct kprobe *cur = kprobe_running(); + struct kprobe_ctlblk *kcb = get_kprobe_ctlblk(); + + if (!cur) return 0; - if ((kprobe_status != KPROBE_REENTER) && current_kprobe->post_handler) { - kprobe_status = KPROBE_HIT_SSDONE; - current_kprobe->post_handler(current_kprobe, regs, 0); + if ((kcb->kprobe_status != KPROBE_REENTER) && cur->post_handler) { + kcb->kprobe_status = KPROBE_HIT_SSDONE; + cur->post_handler(cur, regs, 0); } - resume_execution(current_kprobe, regs); - regs->eflags |= kprobe_saved_rflags; + resume_execution(cur, regs, kcb); + regs->eflags |= kcb->kprobe_saved_rflags; /* Restore the original saved kprobes variables and continue. */ - if (kprobe_status == KPROBE_REENTER) { - restore_previous_kprobe(); + if (kcb->kprobe_status == KPROBE_REENTER) { + restore_previous_kprobe(kcb); goto out; - } else { - unlock_kprobes(); } + reset_current_kprobe(); out: preempt_enable_no_resched(); @@ -575,18 +566,19 @@ out: return 1; } -/* Interrupts disabled, kprobe_lock held. */ int __kprobes kprobe_fault_handler(struct pt_regs *regs, int trapnr) { - if (current_kprobe->fault_handler - && current_kprobe->fault_handler(current_kprobe, regs, trapnr)) + struct kprobe *cur = kprobe_running(); + struct kprobe_ctlblk *kcb = get_kprobe_ctlblk(); + + if (cur->fault_handler && cur->fault_handler(cur, regs, trapnr)) return 1; - if (kprobe_status & KPROBE_HIT_SS) { - resume_execution(current_kprobe, regs); - regs->eflags |= kprobe_old_rflags; + if (kcb->kprobe_status & KPROBE_HIT_SS) { + resume_execution(cur, regs, kcb); + regs->eflags |= kcb->kprobe_old_rflags; - unlock_kprobes(); + reset_current_kprobe(); preempt_enable_no_resched(); } return 0; @@ -599,39 +591,41 @@ int __kprobes kprobe_exceptions_notify(struct notifier_block *self, unsigned long val, void *data) { struct die_args *args = (struct die_args *)data; + int ret = NOTIFY_DONE; + switch (val) { case DIE_INT3: if (kprobe_handler(args->regs)) - return NOTIFY_STOP; + ret = NOTIFY_STOP; break; case DIE_DEBUG: if (post_kprobe_handler(args->regs)) - return NOTIFY_STOP; + ret = NOTIFY_STOP; break; case DIE_GPF: - if (kprobe_running() && - kprobe_fault_handler(args->regs, args->trapnr)) - return NOTIFY_STOP; - break; case DIE_PAGE_FAULT: + /* kprobe_running() needs smp_processor_id() */ + preempt_disable(); if (kprobe_running() && kprobe_fault_handler(args->regs, args->trapnr)) - return NOTIFY_STOP; + ret = NOTIFY_STOP; + preempt_enable(); break; default: break; } - return NOTIFY_DONE; + return ret; } int __kprobes setjmp_pre_handler(struct kprobe *p, struct pt_regs *regs) { struct jprobe *jp = container_of(p, struct jprobe, kp); unsigned long addr; + struct kprobe_ctlblk *kcb = get_kprobe_ctlblk(); - jprobe_saved_regs = *regs; - jprobe_saved_rsp = (long *) regs->rsp; - addr = (unsigned long)jprobe_saved_rsp; + kcb->jprobe_saved_regs = *regs; + kcb->jprobe_saved_rsp = (long *) regs->rsp; + addr = (unsigned long)(kcb->jprobe_saved_rsp); /* * As Linus pointed out, gcc assumes that the callee * owns the argument space and could overwrite it, e.g. @@ -639,7 +633,8 @@ int __kprobes setjmp_pre_handler(struct kprobe *p, struct pt_regs *regs) * we also save and restore enough stack bytes to cover * the argument area. */ - memcpy(jprobes_stack, (kprobe_opcode_t *) addr, MIN_STACK_SIZE(addr)); + memcpy(kcb->jprobes_stack, (kprobe_opcode_t *)addr, + MIN_STACK_SIZE(addr)); regs->eflags &= ~IF_MASK; regs->rip = (unsigned long)(jp->entry); return 1; @@ -647,36 +642,40 @@ int __kprobes setjmp_pre_handler(struct kprobe *p, struct pt_regs *regs) void __kprobes jprobe_return(void) { - preempt_enable_no_resched(); + struct kprobe_ctlblk *kcb = get_kprobe_ctlblk(); + asm volatile (" xchg %%rbx,%%rsp \n" " int3 \n" " .globl jprobe_return_end \n" " jprobe_return_end: \n" " nop \n"::"b" - (jprobe_saved_rsp):"memory"); + (kcb->jprobe_saved_rsp):"memory"); } int __kprobes longjmp_break_handler(struct kprobe *p, struct pt_regs *regs) { + struct kprobe_ctlblk *kcb = get_kprobe_ctlblk(); u8 *addr = (u8 *) (regs->rip - 1); - unsigned long stack_addr = (unsigned long)jprobe_saved_rsp; + unsigned long stack_addr = (unsigned long)(kcb->jprobe_saved_rsp); struct jprobe *jp = container_of(p, struct jprobe, kp); if ((addr > (u8 *) jprobe_return) && (addr < (u8 *) jprobe_return_end)) { - if ((long *)regs->rsp != jprobe_saved_rsp) { + if ((long *)regs->rsp != kcb->jprobe_saved_rsp) { struct pt_regs *saved_regs = - container_of(jprobe_saved_rsp, struct pt_regs, rsp); + container_of(kcb->jprobe_saved_rsp, + struct pt_regs, rsp); printk("current rsp %p does not match saved rsp %p\n", - (long *)regs->rsp, jprobe_saved_rsp); + (long *)regs->rsp, kcb->jprobe_saved_rsp); printk("Saved registers for jprobe %p\n", jp); show_registers(saved_regs); printk("Current registers\n"); show_registers(regs); BUG(); } - *regs = jprobe_saved_regs; - memcpy((kprobe_opcode_t *) stack_addr, jprobes_stack, + *regs = kcb->jprobe_saved_regs; + memcpy((kprobe_opcode_t *) stack_addr, kcb->jprobes_stack, MIN_STACK_SIZE(stack_addr)); + preempt_enable_no_resched(); return 1; } return 0; diff --git a/arch/x86_64/kernel/ptrace.c b/arch/x86_64/kernel/ptrace.c index bbf64b59a21..a87b6cebe80 100644 --- a/arch/x86_64/kernel/ptrace.c +++ b/arch/x86_64/kernel/ptrace.c @@ -313,48 +313,11 @@ static unsigned long getreg(struct task_struct *child, unsigned long regno) } -asmlinkage long sys_ptrace(long request, long pid, unsigned long addr, long data) +long arch_ptrace(struct task_struct *child, long request, long addr, long data) { - struct task_struct *child; long i, ret; unsigned ui; - /* This lock_kernel fixes a subtle race with suid exec */ - lock_kernel(); - ret = -EPERM; - if (request == PTRACE_TRACEME) { - /* are we already being traced? */ - if (current->ptrace & PT_PTRACED) - goto out; - ret = security_ptrace(current->parent, current); - if (ret) - goto out; - /* set the ptrace bit in the process flags. */ - current->ptrace |= PT_PTRACED; - ret = 0; - goto out; - } - ret = -ESRCH; - read_lock(&tasklist_lock); - child = find_task_by_pid(pid); - if (child) - get_task_struct(child); - read_unlock(&tasklist_lock); - if (!child) - goto out; - - ret = -EPERM; - if (pid == 1) /* you may not mess with init */ - goto out_tsk; - - if (request == PTRACE_ATTACH) { - ret = ptrace_attach(child); - goto out_tsk; - } - ret = ptrace_check_attach(child, request == PTRACE_KILL); - if (ret < 0) - goto out_tsk; - switch (request) { /* when I and D space are separate, these will need to be fixed. */ case PTRACE_PEEKTEXT: /* read word at location addr. */ @@ -608,10 +571,6 @@ asmlinkage long sys_ptrace(long request, long pid, unsigned long addr, long data ret = ptrace_request(child, request, addr, data); break; } -out_tsk: - put_task_struct(child); -out: - unlock_kernel(); return ret; } diff --git a/arch/x86_64/kernel/smpboot.c b/arch/x86_64/kernel/smpboot.c index 658a81b33f3..4b5b088ec10 100644 --- a/arch/x86_64/kernel/smpboot.c +++ b/arch/x86_64/kernel/smpboot.c @@ -65,8 +65,6 @@ int smp_num_siblings = 1; /* Package ID of each logical CPU */ u8 phys_proc_id[NR_CPUS] __read_mostly = { [0 ... NR_CPUS-1] = BAD_APICID }; u8 cpu_core_id[NR_CPUS] __read_mostly = { [0 ... NR_CPUS-1] = BAD_APICID }; -EXPORT_SYMBOL(phys_proc_id); -EXPORT_SYMBOL(cpu_core_id); /* Bitmask of currently online CPUs */ cpumask_t cpu_online_map __read_mostly; diff --git a/arch/x86_64/oprofile/Kconfig b/arch/x86_64/oprofile/Kconfig index 5ade19801b9..d8a84088471 100644 --- a/arch/x86_64/oprofile/Kconfig +++ b/arch/x86_64/oprofile/Kconfig @@ -1,7 +1,3 @@ - -menu "Profiling support" - depends on EXPERIMENTAL - config PROFILING bool "Profiling support (EXPERIMENTAL)" help @@ -19,5 +15,3 @@ config OPROFILE If unsure, say N. -endmenu - diff --git a/arch/xtensa/kernel/ptrace.c b/arch/xtensa/kernel/ptrace.c index 14460743de0..ab5c4c65b5c 100644 --- a/arch/xtensa/kernel/ptrace.c +++ b/arch/xtensa/kernel/ptrace.c @@ -45,58 +45,10 @@ void ptrace_disable(struct task_struct *child) /* Nothing to do.. */ } -long sys_ptrace(long request, long pid, long addr, long data) +long arch_ptrace(struct task_struct *child, long request, long addr, long data) { - struct task_struct *child; int ret = -EPERM; - lock_kernel(); - -#if 0 - if ((int)request != 1) - printk("ptrace(r=%d,pid=%d,addr=%08lx,data=%08lx)\n", - (int) request, (int) pid, (unsigned long) addr, - (unsigned long) data); -#endif - - if (request == PTRACE_TRACEME) { - - /* Are we already being traced? */ - - if (current->ptrace & PT_PTRACED) - goto out; - - if ((ret = security_ptrace(current->parent, current))) - goto out; - - /* Set the ptrace bit in the process flags. */ - - current->ptrace |= PT_PTRACED; - ret = 0; - goto out; - } - - ret = -ESRCH; - read_lock(&tasklist_lock); - child = find_task_by_pid(pid); - if (child) - get_task_struct(child); - read_unlock(&tasklist_lock); - if (!child) - goto out; - - ret = -EPERM; - if (pid == 1) /* you may not mess with init */ - goto out; - - if (request == PTRACE_ATTACH) { - ret = ptrace_attach(child); - goto out_tsk; - } - - if ((ret = ptrace_check_attach(child, request == PTRACE_KILL)) < 0) - goto out_tsk; - switch (request) { case PTRACE_PEEKTEXT: /* read word at location addr. */ case PTRACE_PEEKDATA: @@ -375,10 +327,7 @@ long sys_ptrace(long request, long pid, long addr, long data) ret = ptrace_request(child, request, addr, data); goto out; } -out_tsk: - put_task_struct(child); -out: - unlock_kernel(); + out: return ret; } |