summaryrefslogtreecommitdiffstats
path: root/arch/ppc/platforms/4xx/yucca.h
diff options
context:
space:
mode:
Diffstat (limited to 'arch/ppc/platforms/4xx/yucca.h')
-rw-r--r--arch/ppc/platforms/4xx/yucca.h111
1 files changed, 111 insertions, 0 deletions
diff --git a/arch/ppc/platforms/4xx/yucca.h b/arch/ppc/platforms/4xx/yucca.h
new file mode 100644
index 00000000000..01a4afea151
--- /dev/null
+++ b/arch/ppc/platforms/4xx/yucca.h
@@ -0,0 +1,111 @@
+/*
+ * arch/ppc/platforms/4xx/yucca.h
+ *
+ * Yucca board definitions
+ *
+ * Roland Dreier <rolandd@cisco.com> (based on luan.h by Matt Porter)
+ *
+ * Copyright 2004-2005 MontaVista Software Inc.
+ * Copyright (c) 2005 Cisco Systems. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ *
+ */
+
+#ifdef __KERNEL__
+#ifndef __ASM_YUCCA_H__
+#define __ASM_YUCCA_H__
+
+#include <linux/config.h>
+#include <platforms/4xx/ppc440spe.h>
+
+/* F/W TLB mapping used in bootloader glue to reset EMAC */
+#define PPC44x_EMAC0_MR0 0xa0000800
+
+/* Location of MAC addresses in PIBS image */
+#define PIBS_FLASH_BASE 0xffe00000
+#define PIBS_MAC_BASE (PIBS_FLASH_BASE+0x1b0400)
+
+/* External timer clock frequency */
+#define YUCCA_TMR_CLK 25000000
+
+/*
+ * FPGA registers
+ */
+#define YUCCA_FPGA_REG_BASE 0x00000004e2000000ULL
+#define YUCCA_FPGA_REG_SIZE 0x24
+
+#define FPGA_REG1A 0x1a
+
+#define FPGA_REG1A_PE0_GLED 0x8000
+#define FPGA_REG1A_PE1_GLED 0x4000
+#define FPGA_REG1A_PE2_GLED 0x2000
+#define FPGA_REG1A_PE0_YLED 0x1000
+#define FPGA_REG1A_PE1_YLED 0x0800
+#define FPGA_REG1A_PE2_YLED 0x0400
+#define FPGA_REG1A_PE0_PWRON 0x0200
+#define FPGA_REG1A_PE1_PWRON 0x0100
+#define FPGA_REG1A_PE2_PWRON 0x0080
+#define FPGA_REG1A_PE0_REFCLK_ENABLE 0x0040
+#define FPGA_REG1A_PE1_REFCLK_ENABLE 0x0020
+#define FPGA_REG1A_PE2_REFCLK_ENABLE 0x0010
+#define FPGA_REG1A_PE_SPREAD0 0x0008
+#define FPGA_REG1A_PE_SPREAD1 0x0004
+#define FPGA_REG1A_PE_SELSOURCE_0 0x0002
+#define FPGA_REG1A_PE_SELSOURCE_1 0x0001
+
+#define FPGA_REG1C 0x1c
+
+#define FPGA_REG1C_PE0_ROOTPOINT 0x8000
+#define FPGA_REG1C_PE1_ENDPOINT 0x4000
+#define FPGA_REG1C_PE2_ENDPOINT 0x2000
+#define FPGA_REG1C_PE0_PRSNT 0x1000
+#define FPGA_REG1C_PE1_PRSNT 0x0800
+#define FPGA_REG1C_PE2_PRSNT 0x0400
+#define FPGA_REG1C_PE0_WAKE 0x0080
+#define FPGA_REG1C_PE1_WAKE 0x0040
+#define FPGA_REG1C_PE2_WAKE 0x0020
+#define FPGA_REG1C_PE0_PERST 0x0010
+#define FPGA_REG1C_PE1_PERST 0x0008
+#define FPGA_REG1C_PE2_PERST 0x0004
+
+/*
+ * Serial port defines
+ */
+#define RS_TABLE_SIZE 3
+
+/* PIBS defined UART mappings, used before early_serial_setup */
+#define UART0_IO_BASE 0xa0000200
+#define UART1_IO_BASE 0xa0000300
+#define UART2_IO_BASE 0xa0000600
+
+#define BASE_BAUD 11059200
+#define STD_UART_OP(num) \
+ { 0, BASE_BAUD, 0, UART##num##_INT, \
+ (ASYNC_BOOT_AUTOCONF | ASYNC_SKIP_TEST), \
+ iomem_base: (void*)UART##num##_IO_BASE, \
+ io_type: SERIAL_IO_MEM},
+
+#define SERIAL_PORT_DFNS \
+ STD_UART_OP(0) \
+ STD_UART_OP(1) \
+ STD_UART_OP(2)
+
+/* PCI support */
+#define YUCCA_PCIX_LOWER_IO 0x00000000
+#define YUCCA_PCIX_UPPER_IO 0x0000ffff
+#define YUCCA_PCIX_LOWER_MEM 0x80000000
+#define YUCCA_PCIX_UPPER_MEM 0x8fffffff
+#define YUCCA_PCIE_LOWER_MEM 0x90000000
+#define YUCCA_PCIE_MEM_SIZE 0x10000000
+
+#define YUCCA_PCIX_MEM_SIZE 0x10000000
+#define YUCCA_PCIX_MEM_OFFSET 0x00000000
+#define YUCCA_PCIE_MEM_SIZE 0x10000000
+#define YUCCA_PCIE_MEM_OFFSET 0x00000000
+
+#endif /* __ASM_YUCCA_H__ */
+#endif /* __KERNEL__ */