summaryrefslogtreecommitdiffstats
path: root/drivers/net/fm
Commit message (Collapse)AuthorAgeFilesLines
* ppc: Remove Cyrus_P5020 and P5040 boardsTom Rini2021-04-101-1/+0
| | | | | | | | | | | These boards have not been converted to CONFIG_DM_MMC by the deadline. Remove them. As the P5020 is the last ARCH_P5020 platform, remove that support as well. Cc: Andy Fleming <afleming@gmail.com> Cc: Priyanka Jain <priyanka.jain@nxp.com> Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
* ppc: Remove T2081QDS board and ARCH_T2081 supportTom Rini2021-04-101-1/+0
| | | | | | | | | | This board has not been converted to CONFIG_DM_MMC by the deadline. Remove it. It is also the only ARCH_T2081 board so remove that support as well. Cc: Shengzhou Liu <Shengzhou.Liu@nxp.com> Cc: Ruchika Gupta <ruchika.gupta@nxp.com> Signed-off-by: Tom Rini <trini@konsulko.com>
* net: memac_phy: add a timeout to MDIO operationsIoana Ciornei2021-02-081-18/+58
| | | | | | | | | | | | | | | | | | | We have encountered circumstances when a board design does not include pull-up resistors on the external MDIO buses which are not used. This leads to the MDIO data line not being pulled-up, thus the MDIO controller will always see the line as busy. Without a timeout in the MDIO bus driver, the execution is stuck in an infinite loop when any access is initiated on that external bus. Add a timeout in the driver so that we are protected in this circumstance. This is similar to what is being done in the Linux xgmac_mdio driver. Signed-off-by: Ioana Ciornei <ioana.ciornei@nxp.com> Reviewed-by: Madalin Bucur <madalin.bucur@oss.nxp.com> [Rebased] Signed-off-by: Priyanka Jain <priyanka.jain@nxp.com>
* dm: core: Access device ofnode through functionsSimon Glass2021-01-051-2/+2
| | | | | | | | At present ofnode is present in the device even if it is never used. With of-platdata this field is not used, so can be removed. In preparation for this, change the access to go through inline functions. Signed-off-by: Simon Glass <sjg@chromium.org>
* dm: Use access methods for dev/uclass private dataSimon Glass2021-01-051-4/+18
| | | | | | | | | | | Most drivers use these access methods but a few do not. Update them. In some cases the access is not permitted, so mark those with a FIXME tag for the maintainer to check. Signed-off-by: Simon Glass <sjg@chromium.org> Acked-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Acked-by: Pratyush Yadav <p.yadav@ti.com>
* dm: treewide: Rename dev_get_platdata() to dev_get_plat()Simon Glass2020-12-131-1/+1
| | | | | | Rename this to be consistent with the change from 'platdata'. Signed-off-by: Simon Glass <sjg@chromium.org>
* dm: treewide: Rename 'platdata' variables to just 'plat'Simon Glass2020-12-132-2/+2
| | | | | | | | | | We use 'priv' for private data but often use 'platdata' for platform data. We can't really use 'pdata' since that is ambiguous (it could mean private or platform data). Rename some of the latter variables to end with 'plat' for consistency. Signed-off-by: Simon Glass <sjg@chromium.org>
* dm: treewide: Rename auto_alloc_size members to be shorterSimon Glass2020-12-133-5/+5
| | | | | | | | | | | | This construct is quite long-winded. In earlier days it made some sense since auto-allocation was a strange concept. But with driver model now used pretty universally, we can shorten this to 'auto'. This reduces verbosity and makes it easier to read. Coincidentally it also ensures that every declaration is on one line, thus making dtoc's job easier. Signed-off-by: Simon Glass <sjg@chromium.org>
* driver: net: fm: add support for XFIMadalin Bucur2020-09-241-1/+2
| | | | | | | | | All the 10G ports that were working in XFI mode were described as using XGMII (as PHY_INTERFACE_MODE_XFI was not added at the time). Add the minimal changes required for the FMan code to support XFI. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
* treewide: convert bd_t to struct bd_info by coccinelleMasahiro Yamada2020-07-174-4/+4
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
* spi: Convert CONFIG_DM_SPI* to CONFIG_$(SPL_TPL_)DM_SPI*Lukasz Majewski2020-06-291-2/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This change allows more fine tuning of driver model based SPI support in SPL and TPL. It is now possible to explicitly enable/disable the DM_SPI support in SPL and TPL via Kconfig option. Before this change it was necessary to use: /* SPI Flash Configs */ #if defined(CONFIG_SPL_BUILD) #undef CONFIG_DM_SPI #undef CONFIG_DM_SPI_FLASH #undef CONFIG_SPI_FLASH_MTD #endif in the ./include/configs/<board>.h, which is error prone and shall be avoided when we strive to switch to Kconfig. The goal of this patch: Provide distinction for DM_SPI support in both U-Boot proper and SPL (TPL). Valid use case is when U-Boot proper wants to use DM_SPI, but SPL must still support non DM driver. Another use case is the conversion of non DM/DTS SPI driver to support DM/DTS. When such driver needs to work in both SPL and U-Boot proper, the distinction is needed in Kconfig (also if SPL version of the driver supports OF_PLATDATA). In the end of the day one would have to support following use cases (in single driver file - e.g. mxs_spi.c): - U-Boot proper driver supporting DT/DTS - U-Boot proper driver without DT/DTS support (deprecated) - SPL driver without DT/DTS support - SPL (and TPL) driver with DT/DTS (when the SoC has enough resources to run full blown DT/DTS) - SPL driver with DT/DTS and SPL_OF_PLATDATA (when one have constrained environment with no fitImage and OF_LIBFDT support). Some boards do require SPI support (with DM) in SPL (TPL) and some only have DM_SPI{_FLASH} defined to allow compiling SPL. This patch converts #ifdef CONFIG_DM_SPI* to #if CONFIG_IS_ENABLED(DM_SPI) and provides corresponding defines in Kconfig. Signed-off-by: Lukasz Majewski <lukma@denx.de> Tested-by: Adam Ford <aford173@gmail.com> #da850-evm Signed-off-by: Hou Zhiqiang <Zhiqiang.Hou@nxp.com> [trini: Fixup a few platforms] Signed-off-by: Tom Rini <trini@konsulko.com>
* Merge https://gitlab.denx.de/u-boot/custodians/u-boot-fsl-qoriqTom Rini2020-05-201-1/+1
|\ | | | | | | | | | | | | - Add DM_ETH support for lx2160aqds, ls2080aqds, ls1088aqds - QSI related fixes on ls1012a, ls2080a, ls1046a, ls1088a, ls1043a based platforms - Bug-fixes/updtaes related to ls1046afrwy, fsl-mc, msi-map property
| * driver: net: fm: minor fix in DM ETH supportMadalin Bucur2020-05-191-1/+1
| | | | | | | | | | | | | | | | Bus callback functions for read/write/reset need to be set only for DM_ETH, moving endif a bit lower. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
* | common: Drop linux/delay.h from common headerSimon Glass2020-05-183-0/+3
| | | | | | | | | | | | Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
* | common: Drop log.h from common headerSimon Glass2020-05-182-0/+2
| | | | | | | | | | | | Move this header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
* | common: Drop image.h from common headerSimon Glass2020-05-182-0/+2
| | | | | | | | | | | | Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
* | common: Drop part.h from common headerSimon Glass2020-05-181-0/+1
| | | | | | | | | | | | Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
* | common: Drop net.h from common headerSimon Glass2020-05-181-0/+1
|/ | | | | | | | | | | Move this header out of the common header. Network support is used in quite a few places but it still does not warrant blanket inclusion. Note that this net.h header itself has quite a lot in it. It could be split into the driver-mode support, functions, structures, checksumming, etc. Signed-off-by: Simon Glass <sjg@chromium.org>
* driver: net: fm: add DM ETH supportMadalin Bucur2020-04-295-10/+447
| | | | | | | | | | | | | | Probe the FMan MACs based on the device tree while retaining the legacy code/functionality. One notable change introduced here is that, for DM_ETH, the name of the interfaces is corrected to the fmX-macY format, that avoids the referral to the MAC block names which were incorrect for FMan v3 devices (i.e. DTSEC, TGEC) and had weird formatting (i.e. FM1@DTSEC6, FM1@TGEC1). The legacy code is left unchanged in this respect. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
* driver: net: fm: add DM MDIO supportMadalin Bucur2020-04-291-2/+137
| | | | | | | Allow the MDIO devices to be probed based on the device tree. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
* driver: net: fm: separate receive buffer free codeMadalin Bucur2020-04-291-26/+37
| | | | | | | Move the receive buffer free code in a separate function. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
* driver: net: fm: change init_phy() paramMadalin Bucur2020-04-291-11/+8
| | | | | | | Change the init_phy() parameter to simplify the code. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
* net: fm: fix build error when not using nandFrancois Gervais2020-04-171-0/+2
| | | | | | | | | | If CONFIG_CMD_NAND is disabled, get_nand_dev_by_index() is not accessible. This fix allows the build to succeed in this case. Signed-off-by: Francois Gervais <fgervais@distech-controls.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
* armv8/ls1046ardb: RGMII ports require internal delayMadalin Bucur2020-03-301-2/+2
| | | | | | | | | | | | | | | | | | The correct setting for the RGMII ports on LS1046ARDB is to enable delay on both Rx and Tx so the interface mode used must be PHY_INTERFACE_MODE_RGMII_ID. There is a pull-up that turns on Rx internal delay by default and the u-boot does not override that (yet) so in u-boot the interface is functional. In Linux the PHY driver is clearing the Rx delay for the "rgmii-txid" mode and the reception does not work. Changing the RGMII mode to internal delay here ensures that device tree fix-ups for the PHY connection type turn on both Tx and Rx internal delay in Linux. Fixes: cc1aa218f510 ("armv8/ls1046a: RGMII PHY requires internal delay on Tx") Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
* armv8/ls1043ardb: RGMII ports require internal delayMadalin Bucur2020-03-301-2/+2
| | | | | | | | | | | | | | | | | | The correct setting for the RGMII ports on LS1043ARDB is to enable delay on both Rx and Tx so the interface mode used must be PHY_INTERFACE_MODE_RGMII_ID. There is a pull-up that turns on Rx internal delay by default and the u-boot does not override that (yet) so in u-boot the interface is functional. In Linux the PHY driver is clearing the Rx delay for the "rgmii-txid" mode and the reception does not work. Changing the RGMII mode to internal delay here ensures that device tree fix-ups for the PHY connection type turn on both Tx and Rx internal delay in Linux. Fixes: 5a78a472f666 ("armv8/ls1043a: RGMII PHY requires internal delay on Tx") Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
* net: fman: add support for all RGMII delay modesMadalin Bucur2020-03-301-0/+4
| | | | | | | | | | The RGMII modes that include internal delay were not all properly treated in the memac code. Add support for all RGMII delay modes. Fixes: 111fd19e3b9e ("fm/mEMAC: add mEMAC frame work") Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
* crc32: Use the crc.h header for crc functionsSimon Glass2019-12-022-0/+2
| | | | | | | | | | | Drop inclusion of crc.h in common.h and use the correct header directly instead. With this we can drop the conflicting definition in fw_env.h and rely on the crc.h header, which is already included. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Tom Rini <trini@konsulko.com>
* env: Drop environment.h header file where not neededSimon Glass2019-08-111-1/+0
| | | | | | | | This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
* env: Move env_get() to env.hSimon Glass2019-08-111-0/+1
| | | | | | | Move env_get() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
* env: Move env_set_hex() to env.hSimon Glass2019-08-111-0/+1
| | | | | | | | Move env_set_hex() over to the new header file along with env_set_addr() which uses it. Signed-off-by: Simon Glass <sjg@chromium.org> Acked-by: Joe Hershberger <joe.hershberger@ni.com>
* env: Move env_get_f() to env.hSimon Glass2019-08-111-0/+1
| | | | | | | Move this function over to the new header file. Signed-off-by: Simon Glass <sjg@chromium.org> Acked-by: Joe Hershberger <joe.hershberger@ni.com>
* configs: Migrate CONFIG_FMAN_ENET and some related options to KconfigTom Rini2019-05-261-1/+1
| | | | | | | | | Move the main symbol for Freescale Fman Ethernet controller option to Kconfig. Also migrate the CONFIG_SYS_QE_FMAN_FW_IN_xxx macros and rename the SPIFLASH one to follow the same format as all of the others. To do this fully we need to migrate CONFIG_QC, do so. Signed-off-by: Tom Rini <trini@konsulko.com>
* net: fm: add TFABOOT supportRajesh Bhagat2018-12-061-3/+100
| | | | | | | | | | Adds TFABOOT support and allows to pick FMAN firmware on basis of boot source. Signed-off-by: Pankit Garg <pankit.garg@nxp.com> Signed-off-by: Rajesh Bhagat <rajesh.bhagat@nxp.com> [YS: fix checkpatch issues] Reviewed-by: York Sun <york.sun@nxp.com>
* powerpc: t1040: Correct RCW EC2 settingsBin Meng2018-10-291-3/+0
| | | | | | | | | | | | | | Per T1040RM (Rev. 1, 08/2015), there are 2 issues with the RCW EC2 settings. - The value of FSL_CORENET_RCWSR13_EC2_FM1_GPIO is wrong and should be 0x04000000 (value of 1 in RCW bit [420:421]) - Value of 2/3 are reserved in RCW bit [420:421], hence there is no macro FSL_CORENET_RCWSR13_EC2_FM1_DTSEC5_MII. Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Acked-by: Poonam Aggrwal <poonam.aggrwal@nxp.com> Reviewed-by: York Sun <york.sun@nxp.com>
* net: fman: Support both new and legacy FMan CompatiblesZhao Qiang2018-09-271-1/+2
| | | | | | | | | | | | | | | Recently the FMan Port and MAC compatibles were changed. This patch aligns the FMan Port and MAC compatibles to the new FMan device tree binding document. The FMan device tree binding document can be found in the Linux kernel version 3.18.0, commit 297d35fd2a7d3fbd4e5c0f0c1c18213117ba11ba ./Documentation/devicetree/bindings/powerpc/fsl/fman.txt This patch doesn't affect legacy compatibles support. Signed-off-by: Zhao Qiang <qiang.zhao@nxp.com> [York S: reformatted commit message] Reviewed-by: York Sun <york.sun@nxp.com>
* ppa/fm/qe: use block layer in ppa/fm/qe driverYinbo Zhu2018-09-271-1/+1
| | | | | | | | | | | At present the MMC subsystem maintains its own list of MMC devices. This cannot work with driver model when CONFIG_BLK is enabled, use blk_dread to replace previous mmc read interface, use mmc_get_blk_desc to get the mmc device property. Signed-off-by: Yinbo Zhu <yinbo.zhu@nxp.com> [York S: reformatted commit message] Reviewed-by: York Sun <york.sun@nxp.com>
* SPDX: Convert all of our single license tags to Linux Kernel styleTom Rini2018-05-0722-45/+22
| | | | | | | | | | | | | | | | | | | | When U-Boot started using SPDX tags we were among the early adopters and there weren't a lot of other examples to borrow from. So we picked the area of the file that usually had a full license text and replaced it with an appropriate SPDX-License-Identifier: entry. Since then, the Linux Kernel has adopted SPDX tags and they place it as the very first line in a file (except where shebangs are used, then it's second line) and with slightly different comment styles than us. In part due to community overlap, in part due to better tag visibility and in part for other minor reasons, switch over to that style. This commit changes all instances where we have a single declared license in the tag as both the before and after are identical in tag contents. There's also a few places where I found we did not have a tag and have introduced one. Signed-off-by: Tom Rini <trini@konsulko.com>
* blk: Remove various places that do flush cache after readBin Meng2017-09-151-2/+0
| | | | | | | | | | | | | | | | All these places seem to inherit the codes from the MMC driver where a FIXME was put in the comment. However the correct operation after read should be cache invalidate, not flush. The underlying drivers should be responsible for the cache operation. Remove these codes completely. Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Stefan Roese <sr@denx.de> Reviewed-by: York Sun <york.sun@nxp.com> Reviewed-by: Joe Hershberger <joe.hershberger@ni.com> Reviewed-by: Simon Glass <sjg@chromium.org> Tested-by: York Sun <york.sun@nxp.com>
* env: Rename getenv/_f() to env_get()Simon Glass2017-08-162-2/+2
| | | | | | | | | | | We are now using an env_ prefix for environment functions. Rename these two functions for consistency. Also add function comments in common.h. Quite a few places use getenv() in a condition context, provoking a warning from checkpatch. These are fixed up in this patch also. Suggested-by: Wolfgang Denk <wd@denx.de> Signed-off-by: Simon Glass <sjg@chromium.org>
* env: Rename common functions related to setenv()Simon Glass2017-08-161-1/+1
| | | | | | | | | We are now using an env_ prefix for environment functions. Rename these commonly used functions, for consistency. Also add function comments in common.h. Suggested-by: Wolfgang Denk <wd@denx.de> Signed-off-by: Simon Glass <sjg@chromium.org>
* net: fman: add support RGMII_TXID to memacMadalin Bucur2017-08-141-1/+3
| | | | | Signed-off-by: Madalin Bucur <madalin.bucur@nxp.com> Acked-by: Joe Hershberger <joe.hershberger@ni.com>
* net: fm: use get_nand_dev_by_index()Grygorii Strashko2017-07-111-1/+2
| | | | | | | | | As part of preparation for nand DM conversion the new API has been introduced to remove direct access to nand_info array. So, use it here instead of accessing to nand_info array directly. Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com> Reviewed-by: Joe Hershberger <joe.hershberger@ni.com>
* armv8/ls1046a: RGMII PHY requires internal delay on TxMadalin Bucur2017-06-021-2/+2
| | | | | Signed-off-by: Madalin Bucur <madalin.bucur@nxp.com> Acked-by: Joe Hershberger <joe.hershberger@ni.com>
* armv8/ls1043a: RGMII PHY requires internal delay on TxMadalin Bucur2017-06-021-2/+2
| | | | | Signed-off-by: Madalin Bucur <madalin.bucur@nxp.com> Acked-by: Joe Hershberger <joe.hershberger@ni.com>
* armv8: ls1043a: Drop macro CONFIG_LS1043AYork Sun2017-04-171-1/+1
| | | | | | Use CONFIG_ARCH_LS1043A instead. Signed-off-by: York Sun <york.sun@nxp.com>
* powerpc: mpc85xx: Remove variant SoCs T1020/T1022/T1013/T1014York Sun2017-01-041-2/+0
| | | | | | | Remove these SoCs from Kconfig because they don't have individual configuration. Clean up existing macros. Signed-off-by: York Sun <york.sun@nxp.com>
* net: fman: fix 2.5G SGMII settingsshaohui xie2016-12-082-10/+24
| | | | | | | | | The settings for 2.5G SGMII are wrong, which the 2.5G case is missed in set_if_mode(), and the serdes PCS configuration are wrong, this patch uses the correct settings took from Linux. Signed-off-by: Shaohui Xie <Shaohui.Xie@nxp.com> Acked-by: Joe Hershberger <joe.hershberger@ni.com>
* powerpc: T4080: Drop configuration for T4080York Sun2016-11-231-1/+0
| | | | | | There is no T4080 target. Drop related macros. Signed-off-by: York Sun <york.sun@nxp.com>
* powerpc: T4240: Remove macro CONFIG_PPC_T4240York Sun2016-11-231-1/+1
| | | | | | Use CONFIG_ARCH_T4240 from Kconfig instead. Signed-off-by: York Sun <york.sun@nxp.com>
* powerpc: T4160: Remove macro CONFIG_PPC_T4160York Sun2016-11-231-1/+1
| | | | | | Use CONFIG_ARCH_T4160 instead. Signed-off-by: York Sun <york.sun@nxp.com>
generated by cgit (git 2.34.1) at 2026-01-08 16:04:28 +0000