summaryrefslogtreecommitdiffstats
path: root/arch/arm/cpu/armv7/ls102xa
Commit message (Collapse)AuthorAgeFilesLines
* treewide: Convert macro and uses of __section(foo) to __section("foo")Marek Behún2021-05-241-1/+1
| | | | | | | | | | | | | | | | | This commit does the same thing as Linux commit 33def8498fdd. Use a more generic form for __section that requires quotes to avoid complications with clang and gcc differences. Remove the quote operator # from compiler_attributes.h __section macro. Convert all unquoted __section(foo) uses to quoted __section("foo"). Also convert __attribute__((section("foo"))) uses to __section("foo") even if the __attribute__ has multiple list entry forms. Signed-off-by: Marek Behún <marek.behun@nic.cz> Reviewed-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Simon Glass <sjg@chromium.org>
* reset: Remove addr parameter from reset_cpu()Harald Seiler2021-03-021-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Historically, the reset_cpu() function had an `addr` parameter which was meant to pass in an address of the reset vector location, where the CPU should reset to. This feature is no longer used anywhere in U-Boot as all reset_cpu() implementations now ignore the passed value. Generic code has been added which always calls reset_cpu() with `0` which means this feature can no longer be used easily anyway. Over time, many implementations seem to have "misunderstood" the existence of this parameter as a way to customize/parameterize the reset (e.g. COLD vs WARM resets). As this is not properly supported, the code will almost always not do what it is intended to (because all call-sites just call reset_cpu() with 0). To avoid confusion and to clean up the codebase from unused left-overs of the past, remove the `addr` parameter entirely. Code which intends to support different kinds of resets should be rewritten as a sysreset driver instead. This transformation was done with the following coccinelle patch: @@ expression argvalue; @@ - reset_cpu(argvalue) + reset_cpu() @@ identifier argname; type argtype; @@ - reset_cpu(argtype argname) + reset_cpu(void) { ... } Signed-off-by: Harald Seiler <hws@denx.de> Reviewed-by: Simon Glass <sjg@chromium.org>
* Merge branch '2021-02-02-drop-asm_global_data-when-unused'Tom Rini2021-02-154-0/+4
|\ | | | | | | - Merge the patch to take <asm/global_data.h> out of <common.h>
| * common: Drop asm/global_data.h from common headerSimon Glass2021-02-024-0/+4
| | | | | | | | | | | | | | | | | | | | | | | | Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
* | armv7: ls102xa: Enable I-Cache to speed up the boot timeHou Zhiqiang2021-02-081-0/+2
|/ | | | | | | | | Enable the I-Cache to speed up the boot time, especailly for the NOR boot, currently it takes about 15 seconds from power up to the U-Boot prompt, and with the I-Cache enabled it only takes around 2.5 seconds. Signed-off-by: Hou Zhiqiang <Zhiqiang.Hou@nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
* Merge tag 'dm-pull-5jan21' of git://git.denx.de/u-boot-dm into nextTom Rini2021-01-051-0/+4
|\ | | | | | | | | | | | | | | | | Driver model: make some udevice fields private Driver model: Rename U_BOOT_DEVICE et al. dtoc: Tidy up and add more tests ns16550 code clean-up x86 and sandbox minor fixes for of-platdata dtoc prepration for adding build-time instantiation
| * dm: Use access methods for dev/uclass private dataSimon Glass2021-01-051-0/+4
| | | | | | | | | | | | | | | | | | | | | | Most drivers use these access methods but a few do not. Update them. In some cases the access is not permitted, so mark those with a FIXME tag for the maintainer to check. Signed-off-by: Simon Glass <sjg@chromium.org> Acked-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Acked-by: Pratyush Yadav <p.yadav@ti.com>
* | arm: ls102xa: select USB PHY erratum's only if USB is enabledAleksandar Gerasimovski2020-12-101-4/+4
|/ | | | | | | | | | | | The USB support is not by default enabled on all designs, so it does not make seance to have USB specific erratum's enabled on such a designs. On our internal Hitachi-Powergrids design not using the USB controller there is a crash when accessing those specific memory locations selected by the erratum flags. Signed-off-by: Aleksandar Gerasimovski <aleksandar.gerasimovski@hitachi-powergrids.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
* treewide: convert bd_t to struct bd_info by coccinelleMasahiro Yamada2020-07-172-3/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
* common: Drop linux/delay.h from common headerSimon Glass2020-05-182-0/+2
| | | | | | Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
* common: Drop log.h from common headerSimon Glass2020-05-181-0/+1
| | | | | | Move this header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
* common: Drop init.h from common headerSimon Glass2020-05-182-0/+2
| | | | | | Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
* common: Drop net.h from common headerSimon Glass2020-05-182-0/+2
| | | | | | | | | | | Move this header out of the common header. Network support is used in quite a few places but it still does not warrant blanket inclusion. Note that this net.h header itself has quite a lot in it. It could be split into the driver-mode support, functions, structures, checksumming, etc. Signed-off-by: Simon Glass <sjg@chromium.org>
* ARM: LS1021A: remove redundant "depends on ARCH_LS1021A"Masahiro Yamada2020-01-241-3/+0
| | | | | | | | | | | These config entries are inside the menu block, which already depends on ARCH_LS1021A: menu "LS102xA architecture" depends on ARCH_LS1021A Signed-off-by: Masahiro Yamada <masahiroy@kernel.org> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
* common: Move clock functions into a new fileSimon Glass2020-01-172-0/+2
| | | | | | | These three clock functions don't use driver model and should be migrated. In the meantime, create a new file to hold them. Signed-off-by: Simon Glass <sjg@chromium.org>
* pci: layerscape: move PCIE related CONFIG to PCI KconfigPankaj Bansal2020-01-021-8/+0
| | | | | | | | | move the PCIE related config from arch Kconfig to PCI Kconfig. As the PCI_LAYERSCAPE driver is being used in platform other than fsl-layerscape platforms like ls102xa. Signed-off-by: Pankaj Bansal <pankaj.bansal@nxp.com> Signed-off-by: Priyanka Jain <priyanka.jain@nxp.com>
* common: Move ARM cache operations out of common.hSimon Glass2019-12-021-0/+1
| | | | | | | | | These functions are CPU-related and do not use driver model. Move them to cpu_func.h Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Daniel Schwierzeck <daniel.schwierzeck@gmail.com> Reviewed-by: Tom Rini <trini@konsulko.com>
* common: Move some SMP functions out of common.hSimon Glass2019-12-021-0/+1
| | | | | | | These functions belong in cpu_func.h so move them over. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Tom Rini <trini@konsulko.com>
* common: Move some time functions out of common.hSimon Glass2019-12-021-0/+1
| | | | | | | These functions belong in time.h so move them over and add comments. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Tom Rini <trini@konsulko.com>
* Move strtomhz() to vsprintf.hSimon Glass2019-12-021-0/+1
| | | | | | | | | | | At present this function sits in its own file but it does not really justify it. There are similar string functions in vsprintf.h, so move it there. Also add the missing function comment. Use the vsprintf.h include file explicitly where needed. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Tom Rini <trini@konsulko.com>
* arm: drop eSDHC clock getting in mxc_get_clock() for layerscapeYangbo Lu2019-11-271-2/+0
| | | | | | | | | | Although layerscape platforms reuse mxc_get_clock() of i.MX platforms, eSDHC clock getting do not have to use it. It uses global data gd->arch.sdhc_clk directly in fsl_esdhc driver. Even there are more than one eSDHC controllers on SoC, they use same reference clock. Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
* freescale/layerscape: Rename the config CONFIG_SECURE_BOOT nameUdit Agarwal2019-11-081-2/+2
| | | | | | | | Rename CONFIG_SECURE_BOOT to CONFIG_NXP_ESBC to avoid conflict with UEFI secure boot. Signed-off-by: Udit Agarwal <udit.agarwal@nxp.com> Signed-off-by: Priyanka Jain <priyanka.jain@nxp.com>
* armv7: ls102xa: Don't power down OCRAM1 during deep sleepBiwen Li2019-10-211-1/+6
| | | | | | | | To allow OCRAM to be used as wakeup source in deep sleep, do not power it down. Signed-off-by: Biwen Li <biwen.li@nxp.com> Signed-off-by: Priyanka Jain <priyanka.jain@nxp.com>
* armv7: ls102xa: add errata ID A-008646 for workaroundBiwen Li2019-10-211-3/+4
| | | | | | | | The patch adds an errata ID A-008646 for workaround to provide more information by errata ID. Signed-off-by: Biwen Li <biwen.li@nxp.com> Signed-off-by: Priyanka Jain <priyanka.jain@nxp.com>
* armv7: ls102xa: Correct endianness of SCFG_SPARECR8 readBiwen Li2019-10-211-1/+1
| | | | | | | | The patch corrects endianness of register SCFG_SPARECR8 read in_le32 -> in_be32 Signed-off-by: Biwen Li <biwen.li@nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
* arm: ls1021atwr: Convert to use driver model TSEC driverBin Meng2019-07-252-1/+11
| | | | | | | | | | | | | | | | | | | | | | Now that we have added driver model support to the TSEC driver, convert ls1021atwr board to use it. This depends on previous DM series for ls1021atwr: http://patchwork.ozlabs.org/patch/561855/ Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Signed-off-by: Vladimir Oltean <olteanv@gmail.com> Acked-by: Joe Hershberger <joe.hershberger@ni.com> [Vladimir] Made the following changes: - Added 'status = "disabled";' for all Ethernet ports in ls1021a.dtsi - Fixed the confusion between the SGMII/TBI PCS for enet0 and enet1 - a mistake ported over from Linux. Each SGMII PCS lies on the private MDIO bus of the interface (and the RGMII enet2 has no SGMII PCS). - Added CONFIG_DM_ETH to all ls1021atwr_* defconfigs - Completely removed non-DM_ETH support from ls1021atwr - Changed "compatible" string from "fsl,tsec-mdio" to "fsl,etsec2-mdio" and from "fsl,tsec" to "fsl,etsec2" to match Linux
* CONFIG_SPL_SYS_[DI]CACHE_OFF: addTrevor Woerner2019-05-181-2/+2
| | | | | | | | | | | | | While converting CONFIG_SYS_[DI]CACHE_OFF to Kconfig, there are instances where these configuration items are conditional on SPL. This commit adds SPL variants of these configuration items, uses CONFIG_IS_ENABLED(), and updates the configurations as required. Acked-by: Alexey Brodkin <abrodkin@synopsys.com> Signed-off-by: Trevor Woerner <trevor@toganlabs.com> [trini: Make the default depend on the setting for full U-Boot, update more zynq hardware] Signed-off-by: Tom Rini <trini@konsulko.com>
* armv7: ls102xa: Add workaround for DDR erratum A-008850Alison Wang2019-03-152-7/+43
| | | | | | | | | | Barrier transactions from CCI400 need to be disabled till the DDR is configured, otherwise it may lead to system hang. The patch adds workaround to fix the erratum. Signed-off-by: Shengzhou Liu <Shengzhou.Liu@nxp.com> Signed-off-by: Alison Wang <alison.wang@nxp.com> Reviewed-by: Prabhakar Kushwaha <prabhakar.kushwaha@nxp.com>
* arm: remove prototype for get_timer_maskedPatrick Delaunay2018-10-101-6/+1
| | | | | | | | | | | | | | The interruption support had be removed for ARM architecture and the function get_timer_masked() is no more used except in some the timer.c files. This patch clean each timer.c which implement this function and remove the associated prototype in u-boot-arm.h For timer.c, I don't verify if the weak version of get_timer (in lib/time.c) can be used Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com>
* armv7: ls102xa: Disable QE before enter deep sleepRan Wang2018-09-271-0/+4
| | | | | | | Otherwise system will hang after executing wfi. Signed-off-by: Ran Wang <ran.wang_1@nxp.com> Reviewed-by: York Sun <york.sun@nxp.com>
* armv7: fsl: remove sata supportPeng Ma2018-09-272-42/+0
| | | | | | | Remove the old implementation in order to enable DM for sata Signed-off-by: Peng Ma <peng.ma@nxp.com> Reviewed-by: York Sun <york.sun@nxp.com>
* arm: ls102xa: Fix RGMII phy-connection-type FDT fixupBrendan Shanks2018-08-071-2/+2
| | | | | | | | | | | In ft_fixup_enet_phy_connect_type(), use strlen() instead of sizeof() on the pointer result of phy_string_for_interface(). sizeof() was returning the size of the pointer (4 bytes), resulting in the phy-connection-type being set to "rgmi" rather than "rgmii-id". Signed-off-by: Brendan Shanks <brendan.shanks@teradek.com> Cc: York Sun <york.sun@nxp.com> Reviewed-by: York Sun <york.sun@nxp.com>
* Kconfig: Sort bool, default, select and imply optionsMichal Simek2018-07-301-5/+5
| | | | | | | | | Another round of sorting Kconfig entries aplhabetically. Signed-off-by: Michal Simek <michal.simek@xilinx.com> Reviewed-by: Tom Rini <trini@konsulko.com> Acked-by: Alexey Brodkin <abrodkin@synopsys.com> Reviewed-by: Joe Hershberger <joe.hershberger@ni.com>
* ls102xa: psci: save context id in cpu_on commandPatrick Delaunay2018-05-071-1/+2
| | | | | | | Replace the psci_save_target_pc call by the new function psci_save(cpu, pc,context_id) Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com>
* SPDX: Convert all of our single license tags to Linux Kernel styleTom Rini2018-05-0714-28/+14
| | | | | | | | | | | | | | | | | | | | When U-Boot started using SPDX tags we were among the early adopters and there weren't a lot of other examples to borrow from. So we picked the area of the file that usually had a full license text and replaced it with an appropriate SPDX-License-Identifier: entry. Since then, the Linux Kernel has adopted SPDX tags and they place it as the very first line in a file (except where shebangs are used, then it's second line) and with slightly different comment styles than us. In part due to community overlap, in part due to better tag visibility and in part for other minor reasons, switch over to that style. This commit changes all instances where we have a single declared license in the tag as both the before and after are identical in tag contents. There's also a few places where I found we did not have a tag and have introduced one. Signed-off-by: Tom Rini <trini@konsulko.com>
* libfdt: move headers to <linux/libfdt.h> and <linux/libfdt_env.h>Masahiro Yamada2018-03-051-1/+1
| | | | | | | | | | | | | | | | | Thomas reported U-Boot failed to build host tools if libfdt-devel package is installed because tools include libfdt headers from /usr/include/ instead of using internal ones. This commit moves the header code: include/libfdt.h -> include/linux/libfdt.h include/libfdt_env.h -> include/linux/libfdt_env.h and replaces include directives: #include <libfdt.h> -> #include <linux/libfdt.h> #include <libfdt_env.h> -> #include <linux/libfdt_env.h> Reported-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com> Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
* spl: eMMC/SD: Provide one __weak spl_boot_mode() functionLukasz Majewski2018-02-071-17/+0
| | | | | | | | | | | | | | | | | The goal of this patch is to clean up the code related to choosing SPL MMC boot mode. The spl_boot_mode() now is called only in spl_mmc_load_image() function, which is only compiled in if CONFIG_SPL_MMC_SUPPORT is enabled. To achieve the goal, all per mach/arch implementations eligible for unification has been replaced with one __weak implementation. Signed-off-by: Lukasz Majewski <lukma@denx.de> Reviewed-by: Marek Vasut <marex@denx.de> Reviewed-by: Stefano Babic <sbabic@denx.de> Acked-by: Michal Simek <michal.simek@xilinx.com> (For ZynqMP) Reviewed-by: Fabio Estevam <fabio.estevam@nxp.com>
* ata: Migrate CONFIG_SCSI_AHCI to KconfigTuomas Tynkkynen2017-12-121-0/+1
| | | | | | And use 'imply' liberally. Signed-off-by: Tuomas Tynkkynen <tuomas.tynkkynen@iki.fi>
* armv7: Add workaround for USB erratum A-009007Ran Wang2017-09-112-0/+18
| | | | | | | | | | | | | | | Rx Compliance tests may fail intermittently at high jitter frequencies using default register values Program register USB_PHY_RX_OVRD_IN_HI in certain sequence to make the Rx compliance test pass. Signed-off-by: Sriram Dash <sriram.dash@nxp.com> Signed-off-by: Rajesh Bhagat <rajesh.bhagat@nxp.com> Signed-off-by: Suresh Gupta <suresh.bhagat@nxp.com> Signed-off-by: Ran Wang <ran.wang_1@nxp.com> [YS: Reordered Kconfig options] Reviewed-by: York Sun <york.sun@nxp.com>
* armv7: Add workaround for USB erratum A-008997Ran Wang2017-09-112-0/+19
| | | | | | | | | | | | | | | Low Frequency Periodic Singaling (LFPS) Peak-to-Peak Differential Output Voltage Test Compliance fails using default transmitter settings Change config of transmitter signal swings by setting register PCSTXSWINGFULL to 0x47 to pass compliance tests. Signed-off-by: Sriram Dash <sriram.dash@nxp.com> Signed-off-by: Rajesh Bhagat <rajesh.bhagat@nxp.com> Signed-off-by: Suresh Gupta <suresh.gupta@nxp.com> Signed-off-by: Ran Wang <ran.wang_1@nxp.com> [YS: Reordered Kconfig options] Reviewed-by: York Sun <york.sun@nxp.com>
* armv7: Add workaround for USB erratum A-009798Ran Wang2017-09-112-0/+16
| | | | | | | | | | | | | | | | The default setting for USB High Speed Squelch Threshold results in a threshold close to or lower than 100mV. This leads to Receive Compliance test failure for a 100mV threshold. Shift the threshold from ~100mV towards ~130mV by setting SQRXTUNE to 0x0 to pass USB High Speed Receiver Sensitivity Compliance test. Signed-off-by: Sriram Dash <sriram.dash@nxp.com> Signed-off-by: Rajesh Bhagat <rajesh.bhagat@nxp.com> Signed-off-by: Suresh Gupta <suresh.gupta@nxp.com> Signed-off-by: Ran Wang <ran.wang_1@nxp.com> [YS: Reordered Kconfig options] Reviewed-by: York Sun <york.sun@nxp.com>
* armv7: Add workaround for USB erratum A-009008Ran Wang2017-09-112-0/+21
| | | | | | | | | | | | | | | USB High Speed (HS) EYE Height Adjustment USB HS speed eye diagram fails with the default value at many corners, particularly at a high temperature Optimal eye at TXREFTUNE value to 0x9 is observed, change set the same value. Signed-off-by: Sriram Dash <sriram.dash@nxp.com> Signed-off-by: Suresh Gupta <suresh.gupta@nxp.com> Signed-off-by: Ran Wang <ran.wang_1@nxp.com> [YS: Reordered Kconfig options] Reviewed-by: York Sun <york.sun@nxp.com>
* fsl-layerscape: Consolidate registers space defination for CCI-400 busAshish Kumar2017-09-112-1/+14
| | | | | | | | | | | | | | | | CoreLink Cache Coherent Interconnect (CCI) provides full cache coherency between two clusters of multi-core CPUs and I/O coherency for devices and I/O masters. This patch add new config option SYS_FSL_HAS_CCI400 and moves existing register space definaton of CCI-400 bus to fsl_immap to be shared. CONFIG_SYS_CCI400_ADDR is replaced with SYS_CCI400_OFFSET in Kconfig. Signed-off-by: Ashish Kumar <Ashish.Kumar@nxp.com> Signed-off-by: Prabhakar Kushwaha <prabhakar.kushwaha@nxp.com> [YS: revised commit message, squashed patches for armv8 and armv7] Reviewed-by: York Sun <york.sun@nxp.com>
* Convert CONFIG_CMD_PCI to KconfigSimon Glass2017-08-111-0/+1
| | | | | | | | | This converts the following to Kconfig: CONFIG_CMD_PCI Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com>
* dm: scsi: Document and rename the scsi_scan() parameterSimon Glass2017-07-111-1/+1
| | | | | | | | | The 'mode' parameter is actually a flag to determine whether to display a list of devices found during the scan. Rename it to reflect this, add a function comment and adjust callers to use a boolean. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
* Convert CONFIG_SCSI to KconfigSimon Glass2017-07-111-0/+1
| | | | | | | | This converts the following to Kconfig: CONFIG_SCSI Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
* fdt: Move fdt_fixup_ethernet to a common placeTom Rini2017-05-011-2/+0
| | | | | | | | | | | | | | | | | | | | | | | | With 3f66149d9fb4 we no longer have a common call fdt_fixup_ethernet. This was fine to do on PowerPC as they largely had calls already in ft_cpu_fixup. On ARM however we largely relied on this call. Rather than introduce a large number of changes to ft_cpu_fixup / ft_board_fixup we recognize that this is a common enough call that we should be doing it in a central location. Do it early enough that we can do any further updates in ft_cpu_fixup / ft_board_fixup. Cc: Gerd Hoffmann <kraxel@redhat.com> Cc: Chen-Yu Tsai <wens@csie.org> Cc: Maxime Ripard <maxime.ripard@free-electrons.com> Cc: Thomas Chou <thomas@wytron.com.tw> (maintainer:NIOS) Cc: York Sun <york.sun@nxp.com> (maintainer:POWERPC MPC85XX) Cc: Stefan Roese <sr@denx.de> (maintainer:POWERPC PPC4XX) Cc: Simon Glass <sjg@chromium.org> Cc: Joakim Tjernlund <Joakim.Tjernlund@infinera.com> Fixes: 3f66149d9fb4 ("Remove extra fdt_fixup_ethernet() call") Signed-off-by: Tom Rini <trini@konsulko.com> Acked-by: Stefan Roese <sr@denx.de> Acked-by: York Sun <york.sun@nxp.com> Reviewed-by: Simon Glass <sjg@chromium.org>
* Convert CONFIG_FSL_DCU_FB to KconfigSanchayan Maity2017-04-141-1/+1
| | | | | | | | | Rename CONFIG_FSL_DCU_FB to CONFIG_VIDEO_FSL_DCU_FB and convert it to Kconfig. Signed-off-by: Sanchayan Maity <maitysanchayan@gmail.com> Reviewed-by: Stefan Agner <stefan.agner@toradex.com> Reviewed-by: Alison Wang <alison.wang@nxp.com>
* fsl: ls102x: remove redundant GENERIC_TIMER_CLKAndre Przywara2017-04-052-2/+2
| | | | | | | | | | | Some Freescale boards used an extra version of the constant to hold the Generic Timer frequency. This can easily be covered by the now unified COUNTER_FREQUENCY constant, so remove this extra variable from those boards. Signed-off-by: Andre Przywara <andre.przywara@arm.com> Reviewed-by: York Sun <york.sun@nxp.com> Reviewed-by: Jagan Teki <jagan@openedev.com>
* arch: arm: update the IFC IP input clockPrabhakar Kushwaha2017-02-031-8/+1
| | | | | | | | | | | | IFC IP clock is always a constant divisor of platform clock pre-defined per SoC. Clock control register (CCR) used in current implementation governs IFC IP output clock. Update sys_info->freq_localbus to represent IFC input clock with value constant divisor of platform clock. Signed-off-by: Prabhakar Kushwaha <prabhakar.kushwaha@nxp.com> Reviewed-by: York Sun <york.sun@nxp.com>
generated by cgit (git 2.34.1) at 2025-09-02 19:37:43 +0000