Baremetal Environment

Baremetal Environment

TripleO can be used in an all baremetal environment. One machine will be used for Undercloud, the others will be used for your Overcloud.

Minimum System Requirements

To deploy a minimal TripleO cloud with TripleO you need the following baremetal machines:

  • 1 Undercloud
  • 1 Overcloud Controller
  • 1 Overcloud Compute

For each additional Overcloud role, such as Block Storage or Object Storage, you need an additional baremetal machine.

The baremetal machines must meet the following minimum specifications:

  • 8 core CPU
  • 12 GB memory
  • 60 GB free disk space

Larger systems are recommended for production deployments, however.

For instance, the undercloud needs a bit more capacity, especially regarding RAM (minimum of 16G is advised) and is pretty intense for the I/O - fast disks (SSD, SAS) are strongly advised.

Please also note the undercloud needs space in order to store twice the “overcloud-full” image (one time in its glance, one time in /var/lib subdirectories for PXE/TFTP).

TripleO is supporting only the following operating systems:

  • RHEL 7 x86_64
  • CentOS 7 x86_64

Please also ensure your node clock is set to UTC in order to prevent any issue when the OS hwclock syncs to the BIOS clock before applying timezone offset, causing files to have a future-dated timestamp.

Preparing the Baremetal Environment

Networking

The overcloud nodes will be deployed from the undercloud machine and therefore the machines need to have have their network settings modified to allow for the overcloud nodes to be PXE boot’ed using the undercloud machine. As such, the setup requires that:

  • All overcloud machines in the setup must support IPMI
  • A management provisioning network is setup for all of the overcloud machines. One NIC from every machine needs to be in the same broadcast domain of the provisioning network. In the tested environment, this required setting up a new VLAN on the switch. Note that you should use the same NIC on each of the overcloud machines ( for example: use the second NIC on each overcloud machine). This is because during installation we will need to refer to that NIC using a single name across all overcloud machines e.g. em2
  • The provisioning network NIC should not be the same NIC that you are using for remote connectivity to the undercloud machine. During the undercloud installation, a openvswitch bridge will be created for Neutron and the provisioning NIC will be bridged to the openvswitch bridge. As such, connectivity would be lost if the provisioning NIC was also used for remote connectivity to the undercloud machine.
  • The overcloud machines can PXE boot off the NIC that is on the private VLAN. In the tested environment, this required disabling network booting in the BIOS for all NICs other than the one we wanted to boot and then ensuring that the chosen NIC is at the top of the boot order (ahead of the local hard disk drive and CD/DVD drives).
  • For each overcloud machine you have: the MAC address of the NIC that will PXE boot on the provisioning network the IPMI information for the machine (i.e. IP address of the IPMI NIC, IPMI username and password)

Refer to the following diagram for more information

../../_images/TripleO_Network_Diagram_.jpg

Setting Up The Undercloud Machine

  1. Select a machine within the baremetal environment on which to install the undercloud.

  2. Install RHEL 7.1 x86_64 or CentOS 7 x86_64 on this machine.

  3. If needed, create a non-root user with sudo access to use for installing the Undercloud:

    sudo useradd stack
    sudo passwd stack  # specify a password
    echo "stack ALL=(root) NOPASSWD:ALL" | sudo tee -a /etc/sudoers.d/stack
    sudo chmod 0440 /etc/sudoers.d/stack
    

RHEL

If using RHEL, register the Undercloud for package installations/updates.

RHEL Portal Registration

Register the host machine using Subscription Management:

sudo subscription-manager register --username="[your username]" --password="[your password]"
# Find this with `subscription-manager list --available`
sudo subscription-manager attach --pool="[pool id]"
# Verify repositories are available
sudo subscription-manager repos --list
# Enable repositories needed
sudo subscription-manager repos --enable=rhel-7-server-rpms \
     --enable=rhel-7-server-optional-rpms --enable=rhel-7-server-extras-rpms \
     --enable=rhel-7-server-openstack-6.0-rpms

RHEL Satellite Registration

To register the host machine to a Satellite, the following repos must be synchronized on the Satellite and enabled for registered systems:

rhel-7-server-rpms
rhel-7-server-optional-rpms
rhel-7-server-extras-rpms
rhel-7-server-openstack-6.0-rpms

See the Red Hat Satellite User Guide for how to configure the system to register with a Satellite server. It is suggested to use an activation key that automatically enables the above repos for registered systems.

Validations

You can run the prep validations to verify the hardware. Later in the process, the validations will be run by the undercloud processes.

However, the undercloud is not set up yet. You can install Ansible on your local machine (that has SSH connectivity to the undercloud) and validate the undercloud from there.

You need Ansible version 2 and the hostname/IP address of the undercloud (referred to $UNDERCLOUD_HOST here):

$ sudo yum install ansible
$ git clone https://git.openstack.org/openstack/tripleo-validations
$ cd tripleo-validations
$ printf "[undercloud]\n$UNDERCLOUD_HOST" > hosts

Then get the prep validations:

$ grep -l '^\s\+-\s\+prep' -r validations

And run them one by one:

$ ansible-playbook -i hosts validations/validation-name.yaml

Configuration Files

instackenv.json

Create a JSON file describing your Overcloud baremetal nodes, call it instackenv.json and place in your home directory. The file should contain a JSON object with the only field nodes containing list of node descriptions.

Each node description should contains required fields:

  • pm_type - driver for Ironic nodes, see Ironic Hardware Types for details
  • pm_addr - node BMC IP address (hypervisor address in case of virtual environment)
  • pm_user, pm_password - node BMC credentials

Some fields are optional if you’re going to use introspection later:

  • ports - list of baremetal port objects, a map specifying the following keys: address, physical_network (optional) and local_link_connection (optional). Optional for bare metal. Example:

    "ports": [
        {
            "address": "52:54:00:87:c8:2f",
            "physical_network": "physical-network",
            "local_link_connection": {
                "switch_info": "switch",
                "port_id": "gi1/0/11",
                "switch_id": "a6:18:66:33:cb:48"
            }
        }
    ]
    
  • cpu - number of CPU’s in system

  • arch - CPU architecture (common values are i386 and x86_64)

  • memory - memory size in MiB

  • disk - hard driver size in GiB

It is also possible (but optional) to set Ironic node capabilities directly in the JSON file. This can be useful for assigning node profiles or setting boot options at registration time:

  • capabilities - Ironic node capabilities. For example:

    "capabilities": "profile:compute,boot_option:local"
    

There are also two additional and optional fields that can be used to help a user identifying machines inside instackenv.json file:

  • name - name associated to the node, it will appear in the Name column while listing nodes
  • _comment to associate a comment to the node (like position, long description and so on). Note that this field will not be considered by Ironic during the import

Also if you’re working in a diverse environment with multiple architectures and/or platforms within an architecture you may find it necessary to include a platform field:

  • platform - String paired with images to fine tune image selection

For example:

{
    "nodes": [
        {
            "name": "node-a",
            "pm_type": "ipmi",
            "ports": [
                {
                    "address": "fa:16:3e:2a:0e:36",
                    "physical_network": "ctlplane"
                }
            ],
            "cpu": "2",
            "memory": "4096",
            "disk": "40",
            "arch": "x86_64",
            "pm_user": "admin",
            "pm_password": "password",
            "pm_addr": "10.0.0.8",
            "_comment": "Room 1 - Rack A - Unit 22/24"
        },
        {
            "name": "node-b",
            "pm_type": "ipmi",
            "ports": [
                {
                    "address": "fa:16:3e:da:39:c9",
                    "physical_network": "ctlplane"
                }
            ],
            "cpu": "2",
            "memory": "4096",
            "disk": "40",
            "arch": "x86_64",
            "pm_user": "admin",
            "pm_password": "password",
            "pm_addr": "10.0.0.15",
            "_comment": "Room 1 - Rack A - Unit 26/28"
        },
        {
            "name": "node-n",
            "pm_type": "ipmi",
            "ports": [
                {
                    "address": "fa:16:3e:51:9b:68",
                    "physical_network": "leaf1"
                }
            ],
            "cpu": "2",
            "memory": "4096",
            "disk": "40",
            "arch": "x86_64",
            "pm_user": "admin",
            "pm_password": "password",
            "pm_addr": "10.0.0.16",
            "_comment": "Room 1 - Rack B - Unit 10/12"
        }
    ]
}

Note

You don’t need to create this file, if you plan on using Node Discovery.

Ironic Hardware Types

Ironic hardware types provide various level of support for different hardware. Hardware types, introduced in the Ocata cycle, are a new generation of Ironic drivers. Previously, the word drivers was used to refer to what is now called classic drivers. See Ironic drivers documentation for a full explanation of similarities and differences between the two types.

Hardware types are enabled in the undercloud.conf using the enabled_hardware_types configuration option. Classic drivers are enabled using the enabled_drivers option. It is deprecated in the Queens release cycle and should no longer be used. See the hardware types migration guide for information on how to migrate existing nodes.

Both hardware types and classic drivers can be equially used in the pm_addr field of the instackenv.json.

See https://docs.openstack.org/ironic/latest/admin/drivers.html for the most up-to-date information about Ironic hardware types and hardware interfaces, but note that this page always targets Ironic git master, not the release we use.

Generic Hardware Types

  • This most generic hardware type is ipmi. It uses the ipmitool utility to manage a bare metal node, and supports a vast variety of hardware.

    Stable Branch

    This hardware type is supported starting with the Pike release. For older releases use the functionally equivalent pxe_ipmitool driver.

    Virtual

    When combined with VirtualBMC, this hardware type can be used for developing and testing TripleO in a virtual environment as well.

    Stable Branch

    Prior to the Ocata release, a special pxe_ssh driver was used for testing Ironic in the virtual environment. This driver connects to the hypervisor to conduct management operations on virtual nodes. In case of this driver, pm_addr is a hypervisor address, pm_user is a SSH user name for accessing hypervisor, pm_password is a private SSH key for accessing hypervisor. Note that private key must not be encrypted.

    Warning

    The pxe_ssh driver is deprecated and pxe_ipmitool + VirtualBMC should be used instead.

  • Another generic hardware type is redfish. It provides support for the quite new Redfish standard, which aims to replace IPMI eventually as a generic protocol for managing hardware. In addition to the pm_* fields mentioned above, this hardware type also requires setting pm_system_id to the full identifier of the node in the controller (e.g. /redfish/v1/Systems/42).

    Stable Branch

    Redfish support was introduced in the Pike release.

The following generic hardware types are not enabled by default:

  • The snmp hardware type supports controlling PDUs for power management. It requires boot device to be manually configured on the nodes.

  • Finally, the manual-management hardware type (not enabled by default) skips power and boot device management completely. It requires manual power and boot operations to be done at the right moments, so it’s not recommended for a generic production.

    Stable Branch

    The functional analog of this hardware type before the Queens release was the fake_pxe driver.

Vendor Hardware Types

TripleO also supports vendor-specific hardware types for some types of hardware:

  • ilo targets HPE Proliant Gen 8 and Gen 9 systems.

    Stable Branch

    Use the pxe_ilo classic driver before the Queens release.

  • idrac targets DELL 12G and newer systems.

    Stable Branch

    Use the pxe_drac classic driver before the Queens release.

The following hardware types are supported but not enabled by default:

Note

Contact a specific vendor team if you have problems with any of these drivers, as the TripleO team often cannot assist with them.

Creative Commons Attribution 3.0 License

Except where otherwise noted, this document is licensed under Creative Commons Attribution 3.0 License. See all OpenStack Legal Documents.