TripleO Fast Forward Upgrade (FFU) N -> N+3

TripleO Fast Forward Upgrade (FFU) N -> N+3

For a detailed background on how the Fast Forward Upgrade (FFU) workflow was proposed please refer to the relevant spec. For a guide on running the FFU in your environment see the ffu-docs. This document will explore some of the technical details of the Newton to Queens FFU specifically.

You might find it helpful to consult this high-level diagram as you read on:

Fast forward upgrade workflow diagram

At a high level the FFU workflow consists of the following steps:

  1. Perform a Minor update on the environment (both undercloud and overcloud) to bring it to the latest Newton. This will include OS level updates, including kernel and openvswitch. As usual for minor update the operator will reboot each node as necessary and so doing this first means the FFU workflow doesn’t (also) have to deal with node reboots later on in the process.

  2. Perform 3 consecutive major upgrades of the undercloud to bring it to Queens. The undercloud will crucially then have the target version of the tripleo-heat-templates including the fast_forward_upgrade_tasks that will deliver the next stages of the workflow.

  3. Generate and then run the fast_forward_upgrade_playbook on the overcloud. This will:

    3.1 First bring down the controlplane services on all nodes.

    3.2 Then update packages, migrate databases and any other version specific

    tasks from Newton to Ocata then Ocata to Pike. This happens only on a single node of each role.

  4. Finally run the Pike to Queens upgrade on all nodes including the Queens upgrade tasks and service configurations.

Step 3 above is started by first performing a Heat stack update using the Queens tripleo-heat-templates from the Queens upgraded undercloud, but without applying any configuration. This stack update is only used to collect the fast_forward_upgrade_tasks (ffu_tasks) from each of the services deployed in the given environment and generate a fast_forward_upgrade_playbook ansible playbook. This playbook is then executed to deliver steps 3.1 and 3.2 above. See below for more information about how the ffu_tasks are compiled into the fast_forward_upgrade_playbook.

A notable exception worthy of mention is the configuration of Ceph services which is managed by ceph-ansible. That is, for Ceph services there is no collection of fast_forward_upgrade_tasks from the ceph related service manifests in the tripleo-heat-templates and so Ceph is not managed by the generated fast_forward_upgrade_playbook. Instead ceph-ansible will be invoked by the Queens deployment and service configuration in step 4 above.

The Heat stack update performed at the start of step 3 also generates the Queens upgrade_steps_playbook and deploy_steps_playbook ansible playbooks. One notable exception is the configuration of Ceph services which is managed by ceph-ansible Step 4 above (Pike to Queens upgrade tasks and Queens services configuration) is delivered through execution of these Heat stack update generated playbooks. Ceph related upgrade and deployment will be applied here with calls to ceph-ansible.

Amongst other things, the P..Q upgrade_tasks stop and disable those systemd services that are being migrated to run in containers. The Queens deploy_steps_playbook will then apply the required puppet and docker configuration to start the containers for those services. For this to be possible the Heat stack update which starts step 3 and that generates the ansible playbooks must include the required docker configuration and environment files, including the latest container images and making sure to set the to-be containerized services to refer to the equivalent docker templates for the Heat resource registry.

FFU and tripleo-heat-templates

This section will present an overview of how the fast_forward_upgrade_playbook.yaml is generated from the tripleo-heat-templates.

FFU uses fast_forward_upgrade_tasks (ffu_tasks) to define the upgrade workflow. These are ‘normal’ ansible tasks and they are carried as a list in the outputs section of a given service manifest, see containerized neutron-api for an example.

The ffu_tasks for those services that are enabled in a given deployment are collected in the outputs of the deploy-steps.j2 into a fast_forward_upgrade_playbook output. This is then retrieved using the config-download mechanism and written to disk as an ansible playbook.

The fast_forward_upgrade_tasks defined for a given service can use the step and release variables to specify when a given task should be executed. At a high level the fast_forward_upgrade_playbook consists of two loops - there is a very good explanation in /#/c/499221 commit message, but an outer loop for the release (first Ocata tasks then Pike tasks) and then an inner loop for the steps within each release.

The ffu_tasks which are set to run in steps 0 to 3 are designated the fast_forward_upgrade_prep_role_tasks and these are executed on all nodes for a given role. Then the ffu_tasks which have steps 4 to max (currently 9) are designated the fast_forward_upgrade_bootstrap_role_tasks and these are only executed on a single node for each role (one controller, one compute etc).

The top level fast_forward_upgrade_playbook.yaml looks like:

- hosts: overcloud
  become: true
  tasks:
    - include_tasks: fast_forward_upgrade_release_tasks.yaml
      loop_control:
        loop_var: release
      with_items: {get_param: [FastForwardUpgradeReleases]}

The fast_forward_upgrade_release_tasks.yaml in turn looks like:

- include_tasks: fast_forward_upgrade_prep_tasks.yaml
- include_tasks: fast_forward_upgrade_bootstrap_tasks.yaml

The fast_forward_upgrade_prep_tasks.yaml specifies the loop with sequence 0 to 3 as explained above:

- include_tasks: fast_forward_upgrade_prep_role_tasks.yaml
  with_sequence: start=0 end=3
  loop_control:
  loop_var: step

And where the fast_forward_upgrade_prep_role_tasks.yaml includes the ffu_tasks on all nodes for each role:

- include_tasks: Controller/fast_forward_upgrade_tasks.yaml
  when: role_name == 'Controller'
- include_tasks: Compute/fast_forward_upgrade_tasks.yaml
  when: role_name == 'Compute'
...etc

Similarly for the fast_forward_upgrade_bootstrap_tasks.yaml it specifies the loop sequence for the step variable to be 4 to 9:

- include_tasks: fast_forward_upgrade_bootstrap_role_tasks.yaml
  with_sequence: start=4 end=9
  loop_control:
  loop_var: step

And where the fast_forward_upgrade_bootstrap_role_tasks.yaml include the ffu_tasks only on a single node for each role type:

- include_tasks: Controller/fast_forward_upgrade_tasks.yaml
  when: role_name == 'Controller' and ansible_hostname == Controller[0]
- include_tasks: Compute/fast_forward_upgrade_tasks.yaml
  when: role_name == 'Compute' and ansible_hostname == Compute[0]
...etc
Creative Commons Attribution 3.0 License

Except where otherwise noted, this document is licensed under Creative Commons Attribution 3.0 License. See all OpenStack Legal Documents.