diff options
Diffstat (limited to '0008-RH-add-mpathconf.patch')
| -rw-r--r-- | 0008-RH-add-mpathconf.patch | 546 |
1 files changed, 546 insertions, 0 deletions
diff --git a/0008-RH-add-mpathconf.patch b/0008-RH-add-mpathconf.patch new file mode 100644 index 0000000..800c113 --- /dev/null +++ b/0008-RH-add-mpathconf.patch @@ -0,0 +1,546 @@ +--- + libmultipath/config.c | 1 + multipath/Makefile | 5 + multipath/main.c | 4 + multipath/mpathconf | 351 ++++++++++++++++++++++++++++++++++++++++++++++++++ + multipath/mpathconf.8 | 116 ++++++++++++++++ + 5 files changed, 475 insertions(+), 2 deletions(-) + +Index: multipath-tools-111219/libmultipath/config.c +=================================================================== +--- multipath-tools-111219.orig/libmultipath/config.c ++++ multipath-tools-111219/libmultipath/config.c +@@ -543,6 +543,7 @@ load_config (char * file) + condlog(0, "/etc/multipath.conf does not exist, blacklisting all devices."); + condlog(0, "A default multipath.conf file is located at"); + condlog(0, "/usr/share/doc/device-mapper-multipath-%d.%d.%d/multipath.conf", MULTIPATH_VERSION(VERSION_CODE)); ++ condlog(0, "You can run /sbin/mpathconf to create or modify /etc/multipath.conf"); + if (conf->blist_devnode == NULL) { + conf->blist_devnode = vector_alloc(); + if (!conf->blist_devnode) { +Index: multipath-tools-111219/multipath/Makefile +=================================================================== +--- multipath-tools-111219.orig/multipath/Makefile ++++ multipath-tools-111219/multipath/Makefile +@@ -17,22 +17,27 @@ $(EXEC): $(OBJS) + $(CC) $(CFLAGS) $(OBJS) -o $(EXEC) $(LDFLAGS) + $(GZIP) $(EXEC).8 > $(EXEC).8.gz + $(GZIP) $(EXEC).conf.5 > $(EXEC).conf.5.gz ++ $(GZIP) mpathconf.8 > mpathconf.8.gz + + install: + $(INSTALL_PROGRAM) -d $(DESTDIR)$(bindir) + $(INSTALL_PROGRAM) -m 755 $(EXEC) $(DESTDIR)$(bindir)/ ++ $(INSTALL_PROGRAM) -m 755 mpathconf $(DESTDIR)$(bindir)/ + $(INSTALL_PROGRAM) -d $(DESTDIR)/lib/udev/rules.d + $(INSTALL_PROGRAM) -m 644 multipath.rules $(DESTDIR)/lib/udev/rules.d/40-multipath.rules + $(INSTALL_PROGRAM) -d $(DESTDIR)$(mandir) + $(INSTALL_PROGRAM) -m 644 $(EXEC).8.gz $(DESTDIR)$(mandir) + $(INSTALL_PROGRAM) -d $(DESTDIR)$(man5dir) + $(INSTALL_PROGRAM) -m 644 $(EXEC).conf.5.gz $(DESTDIR)$(man5dir) ++ $(INSTALL_PROGRAM) -m 644 mpathconf.8.gz $(DESTDIR)$(mandir) + + uninstall: + rm $(DESTDIR)/lib/udev/rules.d/40-multipath.rules + rm $(DESTDIR)$(bindir)/$(EXEC) ++ rm $(DESTDIR)$(bindir)/mpathconf + rm $(DESTDIR)$(mandir)/$(EXEC).8.gz + rm $(DESTDIR)$(man5dir)/$(EXEC).conf.5.gz ++ rm $(DESTDIR)$(mandir)/mpathconf.8.gz + + clean: + rm -f core *.o $(EXEC) *.gz +Index: multipath-tools-111219/multipath/main.c +=================================================================== +--- multipath-tools-111219.orig/multipath/main.c ++++ multipath-tools-111219/multipath/main.c +@@ -406,10 +406,10 @@ main (int argc, char *argv[]) + exit(1); + } + +- if (dm_prereq()) ++ if (load_config(DEFAULT_CONFIGFILE)) + exit(1); + +- if (load_config(DEFAULT_CONFIGFILE)) ++ if (dm_prereq()) + exit(1); + + if (sysfs_init(conf->sysfs_dir, FILE_NAME_SIZE)) { +Index: multipath-tools-111219/multipath/mpathconf +=================================================================== +--- /dev/null ++++ multipath-tools-111219/multipath/mpathconf +@@ -0,0 +1,351 @@ ++#!/bin/sh ++# ++# Copyright (C) 2010 Red Hat, Inc. All rights reserved. ++# ++# This file is part of the device-mapper-multipath package. ++# ++# This copyrighted material is made available to anyone wishing to use, ++# modify, copy, or redistribute it subject to the terms and conditions ++# of the GNU General Public License v.2. ++# ++# You should have received a copy of the GNU General Public License ++# along with this program; if not, write to the Free Software Foundation, ++# Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA ++ ++# ++# Simple editting of /etc/multipath.conf ++# This program was largely ripped off from lvmconf ++# ++ ++unset ENABLE FIND FRIENDLY MODULE MULTIPATHD CHKCONFIG HAVE_DISABLE HAVE_FIND HAVE_BLACKLIST HAVE_DEFAULTS HAVE_FRIENDLY HAVE_MULTIPATHD HAVE_CHKCONFIG HAVE_MODULE SHOW_STATUS CHANGED_CONFIG ++ ++DEFAULT_CONFIGFILE="/usr/share/doc/device-mapper-multipath-0.4.9/multipath.conf" ++CONFIGFILE="/etc/multipath.conf" ++MULTIPATHDIR="/etc/multipath" ++TMPFILE=/etc/multipath/.multipath.conf.tmp ++ ++function usage ++{ ++ echo "usage: $0 <command>" ++ echo "" ++ echo "Commands:" ++ echo "Enable: --enable " ++ echo "Disable: --disable" ++ echo "Set user_friendly_names (Default n): --user_friendly_names <y|n>" ++ echo "Set find_multipaths (Default n): --find_multipaths <y|n>" ++ echo "Load the dm-multipath modules on enable (Default y): --with_module <y|n>" ++ echo "start/stop/reload multipathd (Default n): --with_multipathd <y|n>" ++ echo "chkconfig on/off multipathd (Default y): --with_chkconfig <y|n>" ++ echo "" ++} ++ ++function parse_args ++{ ++ while [ -n "$1" ]; do ++ case $1 in ++ --enable) ++ ENABLE=1 ++ shift ++ ;; ++ --disable) ++ ENABLE=0 ++ shift ++ ;; ++ --user_friendly_names) ++ if [ -n "$2" ]; then ++ FRIENDLY=$2 ++ shift 2 ++ else ++ usage ++ exit 1 ++ fi ++ ;; ++ --find_multipaths) ++ if [ -n "$2" ]; then ++ FIND=$2 ++ shift 2 ++ else ++ usage ++ exit 1 ++ fi ++ ;; ++ --with_module) ++ if [ -n "$2" ]; then ++ MODULE=$2 ++ shift 2 ++ else ++ usage ++ exit 1 ++ fi ++ ;; ++ --with_multipathd) ++ if [ -n "$2" ]; then ++ MULTIPATHD=$2 ++ shift 2 ++ else ++ usage ++ exit 1 ++ fi ++ ;; ++ --with_chkconfig) ++ if [ -n "$2" ]; then ++ CHKCONFIG=$2 ++ shift 2 ++ else ++ usage ++ exit 1 ++ fi ++ ;; ++ *) ++ usage ++ exit ++ esac ++ done ++} ++ ++function validate_args ++{ ++ if [ "$ENABLE" = "0" ] && [ -n "$FRIENDLY" -o -n "$FIND" -o -n "$MODULE" ]; then ++ echo "ignoring extra parameters on disable" ++ FRIENDLY="" ++ FIND="" ++ MODULE="" ++ fi ++ if [ -n "$FRIENDLY" ] && [ "$FRIENDLY" != "y" -a "$FRIENDLY" != "n" ]; then ++ echo "--user_friendly_names must be either 'y' or 'n'" ++ exit 1 ++ fi ++ if [ -n "$FIND" ] && [ "$FIND" != "y" -a "$FIND" != "n" ]; then ++ echo "--find_multipaths must be either 'y' or 'n'" ++ exit 1 ++ fi ++ if [ -z "$ENABLE" -a -z "$FIND" -a -z "$FRIENDLY" ]; then ++ SHOW_STATUS=1 ++ fi ++ if [ -n "$MODULE" ] && [ "$MODULE" != "y" -a "$MODULE" != "n" ]; then ++ echo "--with_module must be either 'y' or 'n'" ++ exit 1 ++ fi ++ if [ -n "$MULTIPATHD" ] && [ "$MULTIPATHD" != "y" -a "$MULTIPATHD" != "n" ]; then ++ echo "--with_multipathd must be either 'y' or 'n'" ++ exit 1 ++ fi ++ if [ -n "$CHKCONFIG" ] && [ "$CHKCONFIG" != "y" -a "$CHKCONFIG" != "n" ]; then ++ echo "--with_chkconfig must be either 'y' or 'n'" ++ exit 1 ++ fi ++} ++ ++umask 0077 ++ ++parse_args "$@" ++ ++validate_args ++ ++if [ ! -d "$MULTIPATHDIR" ]; then ++ echo "/etc/multipath/ does not exist. failing" ++ exit 1 ++fi ++ ++rm $TMPFILE 2> /dev/null ++if [ -f "$CONFIGFILE" ]; then ++ cp $CONFIGFILE $TMPFILE ++elif [ -f "$DEFAULT_CONFIGFILE" ]; then ++ cp $DEFAULT_CONFIGFILE $TMPFILE ++else ++ touch $TMPFILE ++fi ++ ++if grep -q "^blacklist[[:space:]]*{" $TMPFILE ; then ++ HAVE_BLACKLIST=1 ++fi ++ ++if grep -q "^defaults[[:space:]]*{" $TMPFILE ; then ++ HAVE_DEFAULTS=1 ++fi ++ ++if [ -z "$MODULE" -o "$MODULE" = "y" ]; then ++ if lsmod | grep -q "dm_multipath" ; then ++ HAVE_MODULE=1 ++ else ++ HAVE_MODULE=0 ++ fi ++fi ++ ++if [ "$MULTIPATHD" = "y" ]; then ++ if service multipathd status > /dev/null ; then ++ HAVE_MULTIPATHD=1 ++ else ++ HAVE_MULTIPATHD=0 ++ fi ++fi ++ ++if [ -z "$CHKCONFIG" -o "$CHKCONFIG" = "y" ]; then ++ chkconfig --list multipathd > /dev/null 2>&1 ++ if [ $? != 0 ]; then ++ chkconfig --add multipathd ++ fi ++ if chkconfig --list multipathd | grep -q "on" ; then ++ HAVE_CHKCONFIG=1 ++ else ++ HAVE_CHKCONFIG=0 ++ fi ++fi ++ ++if [ "$HAVE_BLACKLIST" = "1" ]; then ++ if sed -n '/^blacklist[[:space:]]*{/,/^}/ p' $TMPFILE | grep -q "^[[:space:]]*devnode \"\.\?\*\"" ; then ++ HAVE_DISABLE=1 ++ elif sed -n '/^blacklist[[:space:]]*{/,/^}/ p' $TMPFILE | grep -q "^[[:space:]]*#[#[:space:]]*devnode \"\.\?\*\"" ; then ++ HAVE_DISABLE=0 ++ fi ++fi ++ ++if [ "$HAVE_DEFAULTS" = "1" ]; then ++ if sed -n '/^defaults[[:space:]]*{/,/^}/ p' $TMPFILE | grep -q "^[[:space:]]*find_multipaths[[:space:]]*\(yes\|1\)" ; then ++ HAVE_FIND=1 ++ elif sed -n '/^defaults[[:space:]]*{/,/^}/ p' $TMPFILE | grep -q "^[[:space:]]*find_multipaths[[:space:]]*\(no\|0\)" ; then ++ HAVE_FIND=0 ++ fi ++ if sed -n '/^defaults[[:space:]]*{/,/^}/ p' $TMPFILE | grep -q "^[[:space:]]*user_friendly_names[[:space:]]*\(yes\|1\)" ; then ++ HAVE_FRIENDLY=1 ++ elif sed -n '/^defaults[[:space:]]*{/,/^}/ p' $TMPFILE | grep -q "^[[:space:]]*user_friendly_names[[:space:]]*\(no\|0\)" ; then ++ HAVE_FRIENDLY=0 ++ fi ++fi ++ ++if [ -n "$SHOW_STATUS" ]; then ++ if [ -z "$HAVE_DISABLE" -o "$HAVE_DISABLE" = 0 ]; then ++ echo "multipath is enabled" ++ else ++ echo "multipath is disabled" ++ fi ++ if [ -z "$HAVE_FIND" -o "$HAVE_FIND" = 0 ]; then ++ echo "find_multipaths is disabled" ++ else ++ echo "find_multipaths is enabled" ++ fi ++ if [ -z "$HAVE_FRIENDLY" -o "$HAVE_FRIENDLY" = 0 ]; then ++ echo "user_friendly_names is disabled" ++ else ++ echo "user_friendly_names is enabled" ++ fi ++ if [ -n "$HAVE_MODULE" ]; then ++ if [ "$HAVE_MODULE" = 1 ]; then ++ echo "dm_multipath module is loaded" ++ else ++ echo "dm_multipath module is not loaded" ++ fi ++ fi ++ if [ -n "$HAVE_MULTIPATHD" ]; then ++ service multipathd status ++ fi ++ if [ -n "$HAVE_CHKCONFIG" ]; then ++ if [ "$HAVE_CHKCONFIG" = 1 ]; then ++ echo "multipathd is chkconfiged on" ++ else ++ echo "multipathd is chkconfiged off" ++ fi ++ fi ++ exit 0 ++fi ++ ++if [ -z "$HAVE_BLACKLIST" ]; then ++ cat >> $TMPFILE <<- _EOF_ ++ ++blacklist { ++} ++_EOF_ ++fi ++ ++if [ -z "$HAVE_DEFAULTS" ]; then ++ cat >> $TMPFILE <<- _EOF_ ++ ++defaults { ++} ++_EOF_ ++fi ++ ++if [ "$ENABLE" = 1 ]; then ++ if [ "$HAVE_DISABLE" = 1 ]; then ++ sed -i '/^blacklist[[:space:]]*{/,/^}/ s/^[[:space:]]*devnode \"\.\?\*\"/# devnode ".*"/' $TMPFILE ++ fi ++elif [ "$ENABLE" = 0 ]; then ++ if [ -z "$HAVE_DISABLE" ]; then ++ sed -i '/^blacklist[[:space:]]*{/ a\ ++ devnode "*" ++' $TMPFILE ++ elif [ "$HAVE_DISABLE" = 0 ]; then ++ sed -i '/^blacklist[[:space:]]*{/,/^}/ s/^[[:space:]]*#[#[:space:]]*devnode \"\.\?\*\"/ devnode ".*"/' $TMPFILE ++ fi ++fi ++ ++if [ "$FIND" = "n" ]; then ++ if [ "$HAVE_FIND" = 1 ]; then ++ sed -i '/^defaults[[:space:]]*{/,/^}/ s/^[[:space:]]*find_multipaths[[:space:]]*\(yes\|1\)/ find_multipaths no/' $TMPFILE ++ CHANGED_CONFIG=1 ++ fi ++elif [ "$FIND" = "y" ]; then ++ if [ -z "$HAVE_FIND" ]; then ++ sed -i '/^defaults[[:space:]]*{/ a\ ++ find_multipaths yes ++' $TMPFILE ++ CHANGED_CONFIG=1 ++ elif [ "$HAVE_FIND" = 0 ]; then ++ sed -i '/^defaults[[:space:]]*{/,/^}/ s/^[[:space:]]*find_multipaths[[:space:]]*\(no\|0\)/ find_multipaths yes/' $TMPFILE ++ CHANGED_CONFIG=1 ++ fi ++fi ++ ++if [ "$FRIENDLY" = "n" ]; then ++ if [ "$HAVE_FRIENDLY" = 1 ]; then ++ sed -i '/^defaults[[:space:]]*{/,/^}/ s/^[[:space:]]*user_friendly_names[[:space:]]*\(yes\|1\)/ user_friendly_names no/' $TMPFILE ++ CHANGED_CONFIG=1 ++ fi ++elif [ "$FRIENDLY" = "y" ]; then ++ if [ -z "$HAVE_FRIENDLY" ]; then ++ sed -i '/^defaults[[:space:]]*{/ a\ ++ user_friendly_names yes ++' $TMPFILE ++ CHANGED_CONFIG=1 ++ elif [ "$HAVE_FRIENDLY" = 0 ]; then ++ sed -i '/^defaults[[:space:]]*{/,/^}/ s/^[[:space:]]*user_friendly_names[[:space:]]*\(no\|0\)/ user_friendly_names yes/' $TMPFILE ++ CHANGED_CONFIG=1 ++ fi ++fi ++ ++if [ -f "$CONFIGFILE" ]; then ++ cp $CONFIGFILE $CONFIGFILE.old ++ if [ $? != 0 ]; then ++ echo "failed to backup old config file, $CONFIGFILE not updated" ++ exit 1 ++ fi ++fi ++ ++cp $TMPFILE $CONFIGFILE ++if [ $? != 0 ]; then ++ echo "failed to copy new config file into place, check $CONFIGFILE is still OK" ++ exit 1 ++fi ++ ++rm -f $TMPFILE ++ ++if [ "$ENABLE" = 1 ]; then ++ if [ "$HAVE_MODULE" = 0 ]; then ++ modprobe dm_multipath ++ fi ++ if [ "$HAVE_MULTIPATHD" = 0 ]; then ++ service multipathd start ++ fi ++ if [ "$HAVE_CHKCONFIG" = 0 ]; then ++ chkconfig multipathd on ++ fi ++elif [ "$ENABLE" = 0 ]; then ++ if [ "$HAVE_MULTIPATHD" = 1 ]; then ++ service multipathd stop ++ fi ++ if [ "$HAVE_CHKCONFIG" = 1 ]; then ++ chkconfig multipathd off ++ fi ++elif [ -n "$CHANGED_CONFIG" -a "$HAVE_MULTIPATHD" = 1 ]; then ++ service multipathd reload ++fi +Index: multipath-tools-111219/multipath/mpathconf.8 +=================================================================== +--- /dev/null ++++ multipath-tools-111219/multipath/mpathconf.8 +@@ -0,0 +1,116 @@ ++.TH MPATHCONF 8 "June 2010" "" "Linux Administrator's Manual" ++.SH NAME ++mpathconf - A tool for configuring device-mapper-multipath ++.SH SYNOPSIS ++.B mpathconf ++.RB [\| commands \|] ++.RB [\| options \|] ++.SH DESCRIPTION ++.B mpathconf ++is a utility that creates or modifies ++.B /etc/multipath.conf. ++It can enable or disable multipathing and configure some common options. ++.B mpathconf ++can also load the ++.B dm_multipath ++module, start and stop the ++.B multipathd ++daemon, and configure the ++.B multipathd ++service to start automatically or not. If ++.B mpathconf ++is called with no commands, it will display the current configuration. ++ ++The default options for mpathconf are ++.B --with_module ++and ++.B --with_chkconfig. ++The ++.B --with_multipathd ++option is not set by default. Enabling multipathing will load the ++.B dm_multipath ++module and chkconfig ++.B multipathd ++to start on the next boot, but it will not immediately start it. This is so ++that users can manually edit their config file if necessary, before starting ++.B multipathd. ++ ++If ++.B /etc/multipath.conf ++already exists, mpathconf will edit it. If it does not exist, mpathconf will ++use ++.B /usr/share/doc/device-mapper-multipath-0.4.9/multipath.conf ++as the starting file. This file has ++.B user_friendly_names ++set. If this file does not exist, mpathconf will create ++.B /etc/multipath.conf ++from scratch. For most users, this means that ++.B user_friendly_names ++will be set by default, unless they use the ++.B --user_friendly_names n ++command. ++.SH COMMANDS ++.TP ++.B --enable ++Removes any line that blacklists all device nodes from the ++.B /etc/multipath.conf ++blacklist section. ++.TP ++.B --disable ++Adds a line that blacklists all device nodes to the ++.B /etc/multipath.conf ++blacklist section. If no blacklist section exists, it will create one. ++.TP ++.B --user_friendly_name \fP { \fBy\fP | \fBn\fP } ++If set to \fBy\fP, this adds the line ++.B user_friendly_names yes ++to the ++.B /etc/multipath.conf ++defaults section. If set to \fBn\fP, this removes the line, if present. This ++command can be used along with any other command. ++.TP ++.B --find_multipaths\fP { \fBy\fP | \fBn\fP } ++If set to \fBy\fP, this adds the line ++.B find_multipaths yes ++to the ++.B /etc/multipath.conf ++defaults section. If set to \fBn\fP, this removes the line, if present. This ++command can be used aldong with any other command. ++.SH OPTIONS ++.TP ++.B --with_module\fP { \fBy\fP | \fBn\fP } ++If set to \fBy\fP, this runs ++.B modprobe dm_multipath ++to install the multipath modules. This option only works with the ++.B --enable ++command. This option is set to \fBy\fP by default. ++.TP ++.B --with_multipathd { \fBy\fP | \fBn\fP } ++If set to \fBy\fP, this runs ++.B service multipathd start ++to start the multipathd daemon on \fB--enable\fP, ++.B service multipathd stop ++to start the multipathd daemon on \fB--disable\fP, and ++.B service multipathd reload ++to reconfigure multipathd on \fB--user_frindly_names\fP and ++\fB--find_multipaths\fP. ++This option is set to \fBn\fP by default. ++.TP ++.B --with_chkconfig { \fBy\fP | \fBn\fP } ++If set to \fBy\fP, this runs ++.B chkconfig multipathd on ++to set multipathd to start automatically on \fB--enable\fP and ++.B chkconfig multipathd off ++to stop multipathd for starting automatically on \fB--disable\fP. ++This option is set to \fBy\fP by default. ++.SH FILES ++.BR /etc/multipath.conf ++.SH "SEE ALSO" ++.BR multipath.conf (5), ++.BR chkconfig (8), ++.BR modprobe (8), ++.BR multipath (8), ++.BR multipathd (8), ++.BR service (8), ++.SH AUTHOR ++Benjamin Marzinski <bmarzins@redhat.com> |