Revamp package a bitdevice-mapper-multipath-0_4_9-10_fc13

1 files changed, 0 insertions, 173 deletions

diff --git a/redhatification.patch b/redhatification.patch
deleted file mode 100644
index ae47e2a..0000000
--- a/redhatification.patch
+++ /dev/null
@@ -1,173 +0,0 @@
-Index: multipath-tools/libmultipath/hwtable.c
-===================================================================
---- multipath-tools.orig/libmultipath/hwtable.c
-+++ multipath-tools/libmultipath/hwtable.c
-@@ -589,7 +589,7 @@ static struct hwentry default_hw[] = {
- 		.vendor        = "IBM",
- 		.product       = "S/390 DASD ECKD",
- 		.bl_product       = "S/390.*",
--		.getuid        = "/sbin/dasdinfo -u -b %n",
-+		.getuid        = "/sbin/dasd_id /dev/%n",
- 		.features      = "1 queue_if_no_path",
- 		.hwhandler     = DEFAULT_HWHANDLER,
- 		.selector      = DEFAULT_SELECTOR,
-Index: multipath-tools/Makefile.inc
-===================================================================
---- multipath-tools.orig/Makefile.inc
-+++ multipath-tools/Makefile.inc
-@@ -28,7 +28,7 @@ libudevdir  = ${prefix}/lib/udev
- multipathdir = $(TOPDIR)/libmultipath
- mandir      = $(prefix)/usr/share/man/man8
- man5dir     = $(prefix)/usr/share/man/man5
--rcdir	    = $(prefix)/etc/init.d
-+rcdir	    = $(prefix)/etc/rc.d/init.d
- syslibdir   = $(prefix)/$(LIB)
- libdir	    = $(prefix)/$(LIB)/multipath
- 
-Index: multipath-tools/multipathd/Makefile
-===================================================================
---- multipath-tools.orig/multipathd/Makefile
-+++ multipath-tools/multipathd/Makefile
-@@ -35,6 +35,7 @@ install:
- 	$(INSTALL_PROGRAM) -d $(DESTDIR)$(bindir)
- 	$(INSTALL_PROGRAM) -m 755 $(EXEC) $(DESTDIR)$(bindir)
- 	$(INSTALL_PROGRAM) -d $(DESTDIR)$(rcdir)
-+	$(INSTALL_PROGRAM) -m 755 multipathd.init.redhat $(DESTDIR)$(rcdir)/$(EXEC)
- 	$(INSTALL_PROGRAM) -d $(DESTDIR)$(mandir)
- 	$(INSTALL_PROGRAM) -m 644 $(EXEC).8.gz $(DESTDIR)$(mandir)
- 
-Index: multipath-tools/multipath/Makefile
-===================================================================
---- multipath-tools.orig/multipath/Makefile
-+++ multipath-tools/multipath/Makefile
-@@ -27,6 +27,9 @@ install:
- 	$(INSTALL_PROGRAM) -m 644 $(EXEC).8.gz $(DESTDIR)$(mandir)
- 	$(INSTALL_PROGRAM) -d $(DESTDIR)$(man5dir)
- 	$(INSTALL_PROGRAM) -m 644 $(EXEC).conf.5.gz $(DESTDIR)$(man5dir)
-+	if [ ! -e $(DESTDIR)//etc/multipath.conf ]; then \
-+		$(INSTALL_PROGRAM) -m 644 multipath.conf.redhat $(DESTDIR)/etc/multipath.conf; \
-+	fi
- 
- uninstall:
- 	rm $(DESTDIR)/etc/udev/rules.d/multipath.rules
-Index: multipath-tools/multipath/multipath.conf.redhat
-===================================================================
---- /dev/null
-+++ multipath-tools/multipath/multipath.conf.redhat
-@@ -0,0 +1,97 @@
-+# This is a basic configuration file with some examples, for device mapper
-+# multipath.
-+# For a complete list of the default configuration values, see
-+# /usr/share/doc/device-mapper-multipath-0.4.9/multipath.conf.defaults
-+# For a list of configuration options with descriptions, see
-+# /usr/share/doc/device-mapper-multipath-0.4.9/multipath.conf.annotated
-+
-+
-+# Blacklist all devices by default. Remove this to enable multipathing
-+# on the default devices.
-+blacklist {
-+        devnode "*"
-+}
-+
-+## By default, devices with vendor = "IBM" and product = "S/390.*" are
-+## blacklisted. To enable mulitpathing on these devies, uncomment the
-+## following lines.
-+#blacklist_exceptions {
-+#	device {
-+#		vendor	"IBM"
-+#		product	"S/390.*"
-+#	}
-+#}
-+
-+## Use user friendly names, instead of using WWIDs as names.
-+defaults {
-+	user_friendly_names yes
-+}
-+##
-+## Here is an example of how to configure some standard options.
-+##
-+#
-+#defaults {
-+#	udev_dir		/dev
-+#	polling_interval 	10
-+#	selector		"round-robin 0"
-+#	path_grouping_policy	multibus
-+#	getuid_callout		"/lib/udev/scsi_id --whitelisted --device=/dev/%n"
-+#	prio			alua
-+#	path_checker		readsector0
-+#	rr_min_io		100
-+#	max_fds			8192
-+#	rr_weight		priorities
-+#	failback		immediate
-+#	no_path_retry		fail
-+#	user_friendly_names	yes
-+#}
-+##
-+## The wwid line in the following blacklist section is shown as an example
-+## of how to blacklist devices by wwid.  The 2 devnode lines are the
-+## compiled in default blacklist. If you want to blacklist entire types
-+## of devices, such as all scsi devices, you should use a devnode line.
-+## However, if you want to blacklist specific devices, you should use
-+## a wwid line.  Since there is no guarantee that a specific device will
-+## not change names on reboot (from /dev/sda to /dev/sdb for example)
-+## devnode lines are not recommended for blacklisting specific devices.
-+##
-+#blacklist {
-+#       wwid 26353900f02796769
-+#	devnode "^(ram|raw|loop|fd|md|dm-|sr|scd|st)[0-9]*"
-+#	devnode "^hd[a-z]"
-+#}
-+#multipaths {
-+#	multipath {
-+#		wwid			3600508b4000156d700012000000b0000
-+#		alias			yellow
-+#		path_grouping_policy	multibus
-+#		path_checker		readsector0
-+#		path_selector		"round-robin 0"
-+#		failback		manual
-+#		rr_weight		priorities
-+#		no_path_retry		5
-+#	}
-+#	multipath {
-+#		wwid			1DEC_____321816758474
-+#		alias			red
-+#	}
-+#}
-+#devices {
-+#	device {
-+#		vendor			"COMPAQ  "
-+#		product			"HSV110 (C)COMPAQ"
-+#		path_grouping_policy	multibus
-+#		getuid_callout          "/lib/udev/scsi_id --whitelisted --device=/dev/%n"
-+#		path_checker		readsector0
-+#		path_selector		"round-robin 0"
-+#		hardware_handler	"0"
-+#		failback		15
-+#		rr_weight		priorities
-+#		no_path_retry		queue
-+#	}
-+#	device {
-+#		vendor			"COMPAQ  "
-+#		product			"MSA1000         "
-+#		path_grouping_policy	multibus
-+#	}
-+#}
-Index: multipath-tools/kpartx/Makefile
-===================================================================
---- multipath-tools.orig/kpartx/Makefile
-+++ multipath-tools/kpartx/Makefile
-@@ -20,10 +20,10 @@ $(EXEC): $(OBJS)
- install: $(EXEC) $(EXEC).8
- 	$(INSTALL_PROGRAM) -d $(DESTDIR)$(bindir)
- 	$(INSTALL_PROGRAM) -m 755 $(EXEC) $(DESTDIR)$(bindir)
--	$(INSTALL_PROGRAM) -d $(DESTDIR)$(libudevdir)
--	$(INSTALL_PROGRAM) -m 755 kpartx_id $(DESTDIR)$(libudevdir)
--	$(INSTALL_PROGRAM) -d $(DESTDIR)/etc/udev/rules.d
--	$(INSTALL_PROGRAM) -m 644 kpartx.rules $(DESTDIR)/etc/udev/rules.d/
-+#	$(INSTALL_PROGRAM) -d $(DESTDIR)$(libudevdir)
-+#	$(INSTALL_PROGRAM) -m 755 kpartx_id $(DESTDIR)$(libudevdir)
-+#	$(INSTALL_PROGRAM) -d $(DESTDIR)/etc/udev/rules.d
-+#	$(INSTALL_PROGRAM) -m 644 kpartx.rules $(DESTDIR)/etc/udev/rules.d/
- 	$(INSTALL_PROGRAM) -d $(DESTDIR)$(mandir)
- 	$(INSTALL_PROGRAM) -m 644 $(EXEC).8.gz $(DESTDIR)$(mandir)
-