text unit test should validate using installed mo file

We use custom gettext classes (e.g. GettextFactory &
NGettextFactory). We should exercise those classes with an installed
binary mo file to demonstrate we are actually returning the expected
translated strings for all strings defined as being translatable.

The test logic in install/po/test_i18n.py was recently enhanced to
make this type of testing easier and more complete.
tests/test_ipalib/test_text.py should import the new i18n test support
and run it.

Previously tests/test_ipalib/test_text.py made a feeble but incomplete
attempt to do the above but even that was often not run because the
test would skip because the necessary test files were not available
unless they had been manually created in the install/po subdir. It is
now possible to correct those deficiencies in the test.

This patch does the following:

* Moves the location of i18n test code and adjust references to it.
  install/po/test_i18n.py was moved to tests/i18n.py. This permits
  tests/test_ipalib/test_text.py to import the i18n test utilities
  in a clean fashion. The Makefile in install/po now calls this
  same file.

* Modfies test function in test_i18n.py to accept function pointers
  for retreiving a translation.

* Imports test_i18n.py from the install/po directory in the tree

* Creates a tmp directory for the test localedir

* Parses the current ipa.pot file in install/po and generates
  a test po and mo file with special unicode markers. It installs
  the test mo file in the tmp localedir. This is accomplished by
  calling create_po() from the test_i18n.py file.

* If any of the above does not work it raises nose.SkipTest with
  the reason, and skips the test.

* It sets up functions to get a translation and a plural translation
  via our text.GettextFactory class and text.NGettextFactory class
  respectively. This are the functions we use intenally to get
  translations. It set the localdir and lang which are used by those
  classes to match our test configuration. It then runs a validation
  test on every translation and it's plural found in the test.po file
  by calling po_file_iterate and passed it the function pointers to
  our internal routines.

* At the conclusion of the test it cleans up after itself.

Note: extraneous files are not created in the tree, only a tmp
directory is utilized.

Validating msgid's in C code was insufficient.

* Make the discovery of format conversions much more robust by authoring
  a new function parse_printf_fmt() that is able to discover each
  format conversion in a string and break it into it's individual
  subparts. One of those subparts is the argument selector index. In c
  code we need to know if the argumenet selector index is present to
  know if translator can reorder the substitution strings.

  This replaces the simplistic python_anonymous_substitutions_regexp
  which was insufficient to deal with other programming languages
  (e.g. c).

* Add get_prog_langs() function to return the set of programming
  languages a msgid appears in. This is necessar because the msdid
  validation is programming language specific.

https://fedorahosted.org/freeipa/ticket/2582

2 files changed, 5 insertions, 644 deletions

diff --git a/install/po/Makefile.in b/install/po/Makefile.in
index 4bee861a8..d65ba0c70 100644
--- a/install/po/Makefile.in
+++ b/install/po/Makefile.in
@@ -15,6 +15,7 @@ MSGINIT = @MSGINIT@
 MSGMERGE = @MSGMERGE@
 MSGCMP = @MSGCMP@
 TX = @TX@
+IPA_TEST_I18N = ../../tests/i18n.py
 
 DOMAIN = @GETTEXT_DOMAIN@
 MSGMERGE_UPDATE = $(MSGMERGE) --update
@@ -129,7 +130,7 @@ update-pot:
 	    echo "$(DOMAIN).pot unmodified" ; \
 	fi || :
 	@rm -f $(DOMAIN).pot.update $(DOMAIN).pot.update.tmp $(DOMAIN).pot.tmp
-	./test_i18n.py --show-strings --validate-pot $(DOMAIN).pot
+	$(IPA_TEST_I18N) --show-strings --validate-pot $(DOMAIN).pot
 
 msg-stats:
 	@pot_count=`$(MSGFMT) --statistics $(DOMAIN).pot 2>&1 | \
@@ -169,38 +170,14 @@ distclean: clean
 
 maintainer-clean: distclean
 
-# We test our translations by taking the original untranslated string
-# (e.g. msgid) and prepend a prefix character and then append a suffix
-# character. The test consists of asserting that the first character in the
-# translated string is the prefix, the last character in the translated string
-# is the suffix and the everything between the first and last character exactly
-# matches the original msgid.
-#
-# We use unicode characters not in the ascii character set for the prefix and
-# suffix to enhance the test. To make reading the translated string easier the
-# prefix is the unicode right pointing arrow and the suffix left pointing arrow,
-# thus the translated string looks like the original string enclosed in
-# arrows. In ASCII art the string "foo" would render as:
-# -->foo<--
-#
-# Unicode right pointing arrow: u'\u2192', utf-8 = '\xe2\x86\x92'
-# Unicode left pointing arrow:  u'\u2190', utf-8 = '\xe2\x86\x90'
-#
-# The sed command below performs the prefix and suffix substitution.
-#
-# When msginit is invoked with an English target locale it copies the msgid
-# into the msgstr. This is an undocumented feature of msginit. Otherwise the
-# msgstr will be set to the empty string (i.e. untranslated). We depend on
-# the msgid being copied to the msgstr.
-
 test:
-	./test_i18n.py --test-gettext
+	$(IPA_TEST_I18N) --test-gettext
 
 validate-pot:
-	./test_i18n.py --show-strings --validate-pot $(DOMAIN).pot
+	$(IPA_TEST_I18N) --show-strings --validate-pot $(DOMAIN).pot
 
 validate-po:
-	./test_i18n.py --show-strings --validate-po $(po_files)
+	$(IPA_TEST_I18N) --show-strings --validate-po $(po_files)
 
 debug:
 	@echo Python potfiles:
diff --git a/install/po/test_i18n.py b/install/po/test_i18n.py
deleted file mode 100755
index beb43ccaa..000000000
--- a/install/po/test_i18n.py
+++ /dev/null
@@ -1,616 +0,0 @@
-#!/usr/bin/python
-# Authors:
-#   John Dennis <jdennis@redhat.com>
-#
-# Copyright (C) 2010  Red Hat
-# see file 'COPYING' for use and warranty information
-#
-# This program is free software; you can redistribute it and/or modify
-# it under the terms of the GNU General Public License as published by
-# the Free Software Foundation, either version 3 of the License, or
-# (at your option) any later version.
-#
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-# GNU General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program.  If not, see <http://www.gnu.org/licenses/>.
-#
-
-import optparse
-import sys
-import gettext
-import locale
-import re
-import os
-import traceback
-import polib
-
-'''
-We test our translations by taking the original untranslated string
-(e.g. msgid) and prepend a prefix character and then append a suffix
-character. The test consists of asserting that the first character in the
-translated string is the prefix, the last character in the translated string
-is the suffix and the everything between the first and last character exactly
-matches the original msgid.
-
-We use unicode characters not in the ascii character set for the prefix and
-suffix to enhance the test. To make reading the translated string easier the
-prefix is the unicode right pointing arrow and the suffix left pointing arrow,
-thus the translated string looks like the original string enclosed in
-arrows. In ASCII art the string "foo" would render as:
--->foo<--
-'''
-
-#-------------------------------------------------------------------------------
-
-verbose = False
-print_traceback = False
-pedantic = False
-show_strings = True
-
-# Unicode right pointing arrow
-prefix = u'\u2192'               # utf-8 == '\xe2\x86\x92'
-# Unicode left pointing arrow
-suffix = u'\u2190'               # utf-8 == '\xe2\x86\x90'
-
-page_width = 80
-section_seperator = '=' * page_width
-entry_seperator = '-' * page_width
-
-#-------------------------------------------------------------------------------
-# For efficiency compile these regexps just once
-_substitution_regexps = [re.compile(r'%[srduoxf]\b'),        # e.g. %s
-                         re.compile(r'%\(\w+\)[srduoxf]\b'), # e.g. %(foo)s
-                         re.compile(r'\$\w+'),               # e.g. $foo
-                         re.compile(r'\${\w+}'),             # e.g. ${foo}
-                         re.compile(r'\$\(\w+\)')            # e.g. $(foo)
-                         ]
-# Python style substitution, e.g. %(foo)s
-# where foo is the key and s is the format char
-# group 1: whitespace between % and (
-# group 2: whitespace between ( and key
-# group 3: whitespace between key and )
-# group 4: whitespace between ) and format char
-# group 5: format char
-_python_substitution_regexp = re.compile(r'%(\s*)\((\s*)\w+(\s*)\)(\s*)([srduoxf]\b)?')
-
-# Shell style substitution, e.g. $foo $(foo) ${foo}
-# where foo is the variable
-_shell_substitution_regexp = re.compile(r'\$(\s*)([({]?)(\s*)\w+(\s*)([)}]?)')
-# group 1: whitespace between $ and delimiter
-# group 2: begining delimiter
-# group 3: whitespace between beginning delmiter and variable
-# group 4: whitespace between variable and ending delimiter
-# group 5: ending delimiter
-
-# We do not permit anonymous substitutions in translation strings
-# (e.g. '%s occurred' % error) because they do not provide the
-# necessary context to translators, they would only see
-# '%s occurred'. Instead a keyword substitution should be used
-# (e.g. '%(error)s occurred' % {'error': error_message})
-
-# Python anonymous format substitutions, e.g. %s, %d, %f, etc.
-python_anonymous_substitutions_regexp = re.compile(r'%[srduoxf]\b') # e.g. %s
-
-def validate_substitutions_match(s1, s2, s1_name='string1', s2_name='string2'):
-    '''
-    Validate both s1 and s2 have the same number of substitution strings.
-    A substitution string would be something that looked like this:
-
-    * %(foo)s
-    * $foo
-    * ${foo}
-    * $(foo)
-
-    The substitutions may appear in any order in s1 and s2, however their
-    format must match exactly and the exact same number of each must exist
-    in both s1 and s2.
-
-    A list of error diagnostics is returned explaining how s1 and s2 failed
-    the validation check. If the returned error list is empty then the
-    validation succeeded.
-
-    :param s1:      First string to validate
-    :param s2:      First string to validate
-    :param s1_name: In diagnostic messages the name for s1
-    :param s2_name: In diagnostic messages the name for s2
-    :return:        List of diagnostic error messages, if empty then success
-    '''
-    errors = []
-
-    def get_subs(s):
-        '''
-        Return a dict whoses keys are each unique substitution and whose
-        value is the count of how many times that substitution appeared.
-        '''
-        subs = {}
-        for regexp in _substitution_regexps:
-            for match in regexp.finditer(s):
-                matched = match.group(0)
-                subs[matched] = subs.get(matched, 0) + 1
-        return subs
-
-    # Get the substitutions and their occurance counts
-    subs1 = get_subs(s1)
-    subs2 = get_subs(s2)
-
-    # Form a set for each strings substitutions and
-    # do set subtraction and interesection
-    set1 = set(subs1.keys())
-    set2 = set(subs2.keys())
-
-    missing1 = set2 - set1
-    missing2 = set1 - set2
-    common = set1 & set2
-
-    # Test for substitutions which are absent in either string
-    if missing1:
-        errors.append("The following substitutions are absent in %s: %s" %
-                      (s1_name, ' '.join(missing1)))
-
-    if missing2:
-        errors.append("The following substitutions are absent in %s: %s" %
-                      (s2_name, ' '.join(missing2)))
-
-    if pedantic:
-        # For the substitutions which are shared assure they occur an equal number of times
-        for sub in common:
-            if subs1[sub] != subs2[sub]:
-                errors.append("unequal occurances of '%s', %s has %d occurances, %s has %d occurances" %
-                              (sub, s1_name, subs1[sub], s2_name, subs2[sub]))
-
-    if errors:
-        if show_strings:
-            errors.append('>>> %s <<<' % s1_name)
-            errors.append(s1.rstrip())
-
-            errors.append('>>> %s <<<' % s2_name)
-            errors.append(s2.rstrip())
-    return errors
-
-
-def validate_substitution_syntax(s, s_name='string'):
-    '''
-    If s has one or more substitution variables then validate they
-    are syntactically correct.
-    A substitution string would be something that looked like this:
-
-    * %(foo)s
-    * $foo
-    * ${foo}
-    * $(foo)
-
-    A list of error diagnostics is returned explaining how s1 and s2 failed
-    the validation check. If the returned error list is empty then the
-    validation succeeded.
-
-    :param s:      String to validate
-    :param s_name: In diagnostic messages the name for s
-    :return:       List of diagnostic error messages, if empty then success
-    '''
-    errors = []
-
-    # Look for Python style substitutions, e.g. %(foo)s
-    for match in _python_substitution_regexp.finditer(s):
-        if match.group(1):
-            errors.append("%s has whitespace between %% and key in '%s'" %
-                          (s_name, match.group(0)))
-        if match.group(2) or match.group(3):
-            errors.append("%s has whitespace next to key in '%s'" %
-                          (s_name, match.group(0)))
-        if match.group(4):
-            errors.append("%s has whitespace between key and format character in '%s'" %
-                          (s_name, match.group(0)))
-        if not match.group(5):
-            errors.append("%s has no format character in '%s'" %
-                          (s_name, match.group(0)))
-
-    # Look for shell style substitutions, e.g. $foo $(foo) ${foo}
-    for match in _shell_substitution_regexp.finditer(s):
-        if match.group(1):
-            errors.append("%s has whitespace between $ and variable in '%s'" %
-                          (s_name, match.group(0)))
-        if match.group(3) or (match.group(4) and match.group(5)):
-            errors.append("%s has whitespace next to variable in '%s'" %
-                          (s_name, match.group(0)))
-
-        beg_delimiter = match.group(2)
-        end_delimiter = match.group(5)
-        matched_delimiters = {'': '', '(': ')', '{': '}'}
-        if beg_delimiter is not None or end_delimiter is not None:
-            if matched_delimiters[beg_delimiter] != end_delimiter:
-                errors.append("%s variable delimiters do not match in '%s', begin delimiter='%s' end delimiter='%s'" %
-                              (s_name, match.group(0), beg_delimiter, end_delimiter))
-
-    if errors:
-        if show_strings:
-            errors.append('>>> %s <<<' % s_name)
-            errors.append(s.rstrip())
-
-    return errors
-
-
-def validate_anonymous_substitutions(s, s_name='string'):
-    '''
-    We do not permit multiple anonymous substitutions in translation
-    strings (e.g. '%s') because they do not allow translators to reorder the
-    wording. Instead keyword substitutions should be used when there are
-    more than one.
-    '''
-    errors = []
-
-
-    matches = list(python_anonymous_substitutions_regexp.finditer(s))
-
-    if len(matches) > 1:
-        for match in python_anonymous_substitutions_regexp.finditer(s):
-            errors.append("%s has anonymous substitution '%s', use keyword substitution instead" %
-                          (s_name, match.group(0)))
-
-    if errors:
-        if show_strings:
-            errors.append('>>> %s <<<' % s_name)
-            errors.append(s.rstrip())
-
-    return errors
-
-def validate_file(file_path, validation_mode):
-    '''
-    Given a pot or po file scan all it's entries looking for problems
-    with variable substitutions. See the following functions for
-    details on how the validation is performed.
-
-    * validate_substitutions_match()
-    * validate_substitution_syntax()
-    * validate_anonymous_substitutions()
-
-    Returns the number of entries with errors.
-    '''
-
-    error_lines = []
-    n_entries_with_errors = 0
-
-    if not os.path.isfile(file_path):
-        print >>sys.stderr, 'file does not exist "%s"' % (file_path)
-        return 1
-    try:
-        po = polib.pofile(file_path)
-    except Exception, e:
-        print >>sys.stderr, 'Unable to parse file "%s": %s' % (file_path, e)
-        return 1
-
-    for entry in po:
-        entry_errors = []
-        msgid = entry.msgid
-        msgstr = entry.msgstr
-        have_msgid = msgid.strip() != ''
-        have_msgstr = msgstr.strip() != ''
-        if validation_mode == 'pot':
-            if have_msgid:
-                errors = validate_anonymous_substitutions(msgid, 'msgid')
-                entry_errors.extend(errors)
-        if validation_mode == 'po':
-            if have_msgid and have_msgstr:
-                errors = validate_substitutions_match(msgid, msgstr, 'msgid', 'msgstr')
-                entry_errors.extend(errors)
-        if pedantic:
-            if have_msgid:
-                errors = validate_substitution_syntax(msgid, 'msgid')
-                entry_errors.extend(errors)
-            if have_msgstr:
-                errors = validate_substitution_syntax(msgstr, 'msgstr')
-                entry_errors.extend(errors)
-        if entry_errors:
-            error_lines.append(entry_seperator)
-            error_lines.append('locations: %s' % (', '.join(["%s:%d" % (x[0], int(x[1])) for x in entry.occurrences])))
-            error_lines.extend(entry_errors)
-            n_entries_with_errors += 1
-    if n_entries_with_errors:
-        error_lines.insert(0, section_seperator)
-        error_lines.insert(1, "%d validation errors in %s" % (n_entries_with_errors, file_path))
-        print '\n'.join(error_lines)
-
-    return n_entries_with_errors
-
-
-#----------------------------------------------------------------------
-def create_po(pot_file, po_file, mo_file):
-
-    if not os.path.isfile(pot_file):
-        print >>sys.stderr, 'file does not exist "%s"' % (pot_file)
-        return 1
-    try:
-        po = polib.pofile(pot_file)
-    except Exception, e:
-        print >>sys.stderr, 'Unable to parse file "%s": %s' % (pot_file, e)
-        return 1
-
-    # Update the metadata in the po file header
-    # It's case insensitive so search the keys in a case insensitive manner
-    #
-    # We need to update the Plural-Forms otherwise gettext.py will raise the
-    # following error:
-    #
-    # raise ValueError, 'plural forms expression could be dangerous'
-    #
-    # It is demanding the rhs of plural= only contains the identifer 'n'
-
-    for k,v in po.metadata.items():
-        if k.lower() == 'plural-forms':
-            po.metadata[k] = 'nplurals=2; plural=(n != 1)'
-            break
-
-
-    # Iterate over all msgid's and form a the msgstr by prepending
-    # the prefix and appending the suffix
-    for entry in po:
-        if entry.msgid_plural:
-            entry.msgstr_plural = {0: prefix + entry.msgid + suffix,
-                                   1: prefix + entry.msgid_plural + suffix}
-        else:
-            entry.msgstr = prefix + entry.msgid + suffix
-
-    # Write out the po and mo files
-    po.save(po_file)
-    print "Wrote: %s" % (po_file)
-
-    po.save_as_mofile(mo_file)
-    print "Wrote: %s" % (mo_file)
-
-    return 0
-
-#----------------------------------------------------------------------
-
-def validate_unicode_edit(msgid, msgstr):
-    # Verify the first character is the test prefix
-    if msgstr[0] != prefix:
-        raise ValueError('First char in translated string "%s" not equal to prefix "%s"' %
-                         (msgstr.encode('utf-8'), prefix.encode('utf-8')))
-
-    # Verify the last character is the test suffix
-    if msgstr[-1] != suffix:
-        raise ValueError('Last char in translated string "%s" not equal to suffix "%s"' %
-                         (msgstr.encode('utf-8'), suffix.encode('utf-8')))
-
-    # Verify everything between the first and last character is the
-    # original untranslated string
-    if msgstr[1:-1] != msgid:
-        raise ValueError('Translated string "%s" minus the first & last character is not equal to msgid "%s"' %
-                         (msgstr.encode('utf-8'), msgid))
-
-    if verbose:
-        msg = 'Success: message string "%s" maps to translated string "%s"' % (msgid, msgstr)
-        print msg.encode('utf-8')
-
-
-def test_translations(po_file, lang, domain, locale_dir):
-    try:
-
-        # The test installs the test message catalog under the xh_ZA
-        # (e.g. Zambia Xhosa) language by default. It would be nice to
-        # use a dummy language not associated with any real language,
-        # but the setlocale function demands the locale be a valid
-        # known locale, Zambia Xhosa is a reasonable choice :)
-
-        os.environ['LANG'] = lang
-
-        # Create a gettext translation object specifying our domain as
-        # 'ipa' and the locale_dir as 'test_locale' (i.e. where to
-        # look for the message catalog). Then use that translation
-        # object to obtain the translation functions.
-
-        t = gettext.translation(domain, locale_dir)
-
-        # Iterate over the msgid's
-        if not os.path.isfile(po_file):
-            print >>sys.stderr, 'file does not exist "%s"' % (po_file)
-            return 1
-        try:
-            po = polib.pofile(po_file)
-        except Exception, e:
-            print >>sys.stderr, 'Unable to parse file "%s": %s' % (po_file, e)
-            return 1
-
-        n_entries = 0
-        n_translations = 0
-        n_valid = 0
-        n_fail = 0
-        for entry in po:
-            if entry.msgid_plural:
-                msgid = entry.msgid
-                msgid_plural = entry.msgid_plural
-                msgstr = t.ungettext(msgid, msgid_plural, 1)
-                msgstr_plural = t.ungettext(msgid, msgid_plural, 2)
-
-                try:
-                    n_translations += 1
-                    validate_unicode_edit(msgid, msgstr)
-                    n_valid += 1
-                except Exception, e:
-                    n_fail += 1
-                    if print_traceback:
-                        traceback.print_exc()
-                    print >> sys.stderr, "ERROR: %s" % e
-
-                try:
-                    n_translations += 1
-                    validate_unicode_edit(msgid_plural, msgstr_plural)
-                    n_valid += 1
-                except Exception, e:
-                    n_fail += 1
-                    if print_traceback:
-                        traceback.print_exc()
-                    print >> sys.stderr, "ERROR: %s" % e
-
-
-            else:
-                msgid = entry.msgid
-                msgstr = t.ugettext(msgid)
-
-                try:
-                    n_translations += 1
-                    validate_unicode_edit(msgid, msgstr)
-                    n_valid += 1
-                except Exception, e:
-                    n_fail += 1
-                    if print_traceback:
-                        traceback.print_exc()
-                    print >> sys.stderr, "ERROR: %s" % e
-
-            n_entries += 1
-
-    except Exception, e:
-        if print_traceback:
-            traceback.print_exc()
-        print >> sys.stderr, "ERROR: %s" % e
-        return 1
-
-    if not n_entries:
-        print >> sys.stderr, "ERROR: no translations found in %s" % (po_filename)
-        return 1
-
-    if n_fail:
-        print >> sys.stderr, "ERROR: %d failures out of %d translations" % (n_fail, n_entries)
-        return 1
-
-    print "%d translations in %d messages successfully tested" % (n_translations, n_entries)
-    return 0
-
-#----------------------------------------------------------------------
-
-usage ='''
-
-%prog --test-gettext
-%prog --create-test
-%prog --validate-pot [pot_file1, ...]
-%prog --validate-po po_file1 [po_file2, ...]
-'''
-
-def main():
-    global verbose, print_traceback, pedantic, show_strings
-
-    parser = optparse.OptionParser(usage=usage)
-
-    mode_group = optparse.OptionGroup(parser, 'Operational Mode',
-                                      'You must select one these modes to run in')
-
-    mode_group.add_option('-g', '--test-gettext', action='store_const', const='test_gettext', dest='mode',
-                          help='create the test translation file(s) and exercise them')
-    mode_group.add_option('-c', '--create-test', action='store_const', const='create_test', dest='mode',
-                          help='create the test translation file(s)')
-    mode_group.add_option('-P', '--validate-pot', action='store_const', const='validate_pot', dest='mode',
-                          help='validate pot file(s)')
-    mode_group.add_option('-p', '--validate-po', action='store_const', const='validate_po', dest='mode',
-                          help='validate po file(s)')
-
-    parser.add_option_group(mode_group)
-    parser.set_defaults(mode='')
-
-    parser.add_option('-s', '--show-strings', action='store_true', dest='show_strings', default=False,
-                      help='show the offending string when an error is detected')
-    parser.add_option('--pedantic', action='store_true', dest='pedantic', default=False,
-                      help='be aggressive when validating')
-    parser.add_option('-v', '--verbose', action='store_true', dest='verbose', default=False,
-                      help='be informative')
-    parser.add_option('--traceback', action='store_true', dest='print_traceback', default=False,
-                      help='print the traceback when an exception occurs')
-
-    param_group = optparse.OptionGroup(parser, 'Run Time Parameters',
-                                       'These may be used to modify the run time defaults')
-
-    param_group.add_option('--test-lang', action='store', dest='test_lang', default='test',
-                           help="test po file uses this as it's basename (default=test)")
-    param_group.add_option('--lang', action='store', dest='lang', default='xh_ZA',
-                           help='lang used for locale, MUST be a valid lang (default=xh_ZA)')
-    param_group.add_option('--domain', action='store', dest='domain', default='ipa',
-                           help='translation domain used during test (default=ipa)')
-    param_group.add_option('--locale-dir', action='store', dest='locale_dir', default='test_locale',
-                           help='locale directory used during test (default=test_locale)')
-    param_group.add_option('--pot-file', action='store', dest='pot_file', default='ipa.pot',
-                           help='default pot file, used when validating pot file or generating test po and mo files (default=ipa.pot)')
-
-    parser.add_option_group(param_group)
-
-    options, args = parser.parse_args()
-
-    verbose = options.verbose
-    print_traceback = options.print_traceback
-    pedantic = options.pedantic
-    show_strings = options.show_strings
-
-    if not options.mode:
-        print >> sys.stderr, 'ERROR: no mode specified'
-        return 1
-
-    if options.mode == 'validate_pot' or options.mode == 'validate_po':
-        if options.mode == 'validate_pot':
-            files = args
-            if not files:
-                files = [options.pot_file]
-            validation_mode = 'pot'
-        elif options.mode == 'validate_po':
-            files = args
-            if not files:
-                print >> sys.stderr, 'ERROR: no po files specified'
-                return 1
-            validation_mode = 'po'
-        else:
-            print >> sys.stderr, 'ERROR: unknown validation mode "%s"' % (options.mode)
-            return 1
-
-        total_errors = 0
-        for f in files:
-            n_errors = validate_file(f, validation_mode)
-            total_errors += n_errors
-        if total_errors:
-            print section_seperator
-            print "%d errors in %d files" % (total_errors, len(files))
-            return 1
-        else:
-            return 0
-
-    elif options.mode == 'create_test' or 'test_gettext':
-        po_file = '%s.po' % options.test_lang
-        pot_file = options.pot_file
-
-        msg_dir = os.path.join(options.locale_dir, options.lang, 'LC_MESSAGES')
-        if not os.path.exists(msg_dir):
-            os.makedirs(msg_dir)
-
-        mo_basename = '%s.mo' % options.domain
-        mo_file = os.path.join(msg_dir, mo_basename)
-
-        result = create_po(pot_file, po_file, mo_file)
-        if result:
-            return result
-
-        if options.mode == 'create_test':
-            return result
-
-        # The test installs the test message catalog under the xh_ZA
-        # (e.g. Zambia Xhosa) language by default. It would be nice to
-        # use a dummy language not associated with any real language,
-        # but the setlocale function demands the locale be a valid
-        # known locale, Zambia Xhosa is a reasonable choice :)
-
-        lang = options.lang
-
-        # Create a gettext translation object specifying our domain as
-        # 'ipa' and the locale_dir as 'test_locale' (i.e. where to
-        # look for the message catalog). Then use that translation
-        # object to obtain the translation functions.
-
-        domain = options.domain
-        locale_dir = options.locale_dir
-
-        return test_translations(po_file, lang, domain, locale_dir)
-
-    else:
-        print >> sys.stderr, 'ERROR: unknown mode "%s"' % (options.mode)
-        return 1
-
-if __name__ == "__main__":
-    sys.exit(main())