diff options
Diffstat (limited to 'python34.spec')
| -rw-r--r-- | python34.spec | 2698 |
1 files changed, 2698 insertions, 0 deletions
diff --git a/python34.spec b/python34.spec new file mode 100644 index 0000000..bddbe9e --- /dev/null +++ b/python34.spec @@ -0,0 +1,2698 @@ +# ====================================================== +# Conditionals and other variables controlling the build +# ====================================================== + +# NOTES ON BOOTSTRAPING PYTHON 3.4: +# +# Due to dependency cycle between Python, pip, setuptools and +# wheel caused by the rewheel patch, one has to build in the +# following order: +# +# 1) python3 with with_rewheel set to 0 +# 2) python3-setuptools and python3-pip with with_rewheel set to 0 +# 3) python3-wheel +# 4) python3-setuptools and python3-pip with with_rewheel set to 1 +# 5) python3 with with_rewheel set to 1 + +%global with_rewheel 0 + +%global pybasever 3.4 + +# pybasever without the dot: +%global pyshortver 34 + +# is this the EPEL 7 main Python 3? +%if "%python3_pkgversion" == "%pyshortver" +%global main_python3 1 +%else +%global main_python3 0 +%endif + + +%global pylibdir %{_libdir}/python%{pybasever} +%global dynload_dir %{pylibdir}/lib-dynload + +# SOABI is defined in the upstream configure.in from Python-3.2a2 onwards, +# for PEP 3149: +# http://www.python.org/dev/peps/pep-3149/ + +# ("configure.in" became "configure.ac" in Python 3.3 onwards, and in +# backports) + +# ABIFLAGS, LDVERSION and SOABI are in the upstream Makefile +# With Python 3.3, we lose the "u" suffix due to PEP 393 +%global ABIFLAGS_optimized m +%global ABIFLAGS_debug dm + +%global LDVERSION_optimized %{pybasever}%{ABIFLAGS_optimized} +%global LDVERSION_debug %{pybasever}%{ABIFLAGS_debug} + +%global SOABI_optimized cpython-%{pyshortver}%{ABIFLAGS_optimized} +%global SOABI_debug cpython-%{pyshortver}%{ABIFLAGS_debug} + +# All bytecode files are now in a __pycache__ subdirectory, with a name +# reflecting the version of the bytecode (to permit sharing of python libraries +# between different runtimes) +# See http://www.python.org/dev/peps/pep-3147/ +# For example, +# foo/bar.py +# now has bytecode at: +# foo/__pycache__/bar.cpython-34.pyc +# foo/__pycache__/bar.cpython-34.pyo +%global bytecode_suffixes .cpython-34.py? + +# Python's configure script defines SOVERSION, and this is used in the Makefile +# to determine INSTSONAME, the name of the libpython DSO: +# LDLIBRARY='libpython$(VERSION).so' +# INSTSONAME="$LDLIBRARY".$SOVERSION +# We mirror this here in order to make it easier to add the -gdb.py hooks. +# (if these get out of sync, the payload of the libs subpackage will fail +# and halt the build) +%global py_SOVERSION 1.0 +%global py_INSTSONAME_optimized libpython%{LDVERSION_optimized}.so.%{py_SOVERSION} +%global py_INSTSONAME_debug libpython%{LDVERSION_debug}.so.%{py_SOVERSION} + +%global with_debug_build 1 + +%global with_gdb_hooks 1 + +%global with_systemtap 1 + +# some arches don't have valgrind so we need to disable its support on them +%ifnarch s390 +%global with_valgrind 1 +%else +%global with_valgrind 0 +%endif + +%global with_gdbm 1 + +# Change from yes to no to turn this off +%global with_computed_gotos yes + +# Turn this to 0 to turn off the "check" phase: +%global run_selftest_suite 1 + +# We want to byte-compile the .py files within the packages using the new +# python3 binary. +# +# Unfortunately, rpmbuild's infrastructure requires us to jump through some +# hoops to avoid byte-compiling with the system python 2 version: +# /usr/lib/rpm/redhat/macros sets up build policy that (amongst other things) +# defines __os_install_post. In particular, "brp-python-bytecompile" is +# invoked without an argument thus using the wrong version of python +# (/usr/bin/python, rather than the freshly built python), thus leading to +# numerous syntax errors, and incorrect magic numbers in the .pyc files. We +# thus override __os_install_post to avoid invoking this script: +%global __os_install_post /usr/lib/rpm/brp-compress \ + %{!?__debug_package:/usr/lib/rpm/brp-strip %{__strip}} \ + /usr/lib/rpm/brp-strip-static-archive %{__strip} \ + /usr/lib/rpm/brp-strip-comment-note %{__strip} %{__objdump} \ + /usr/lib/rpm/brp-python-hardlink +# to remove the invocation of brp-python-bytecompile, whilst keeping the +# invocation of brp-python-hardlink (since this should still work for python3 +# pyc/pyo files) + + +# We need to get a newer configure generated out of configure.in for the following +# patches: +# patch 55 (systemtap) +# patch 113 (more config flags) +# +# For patch 55 (systemtap), we need to get a new header for configure to use +# +# configure.in requires autoconf-2.65, but the version in Fedora is currently +# autoconf-2.66 +# +# For now, we'll generate a patch to the generated configure script and +# pyconfig.h.in on a machine that has a local copy of autoconf 2.65 +# +# Instructions on obtaining such a copy can be seen at +# http://bugs.python.org/issue7997 +# +# To make it easy to regenerate the patch, this specfile can be run in two +# ways: +# (i) regenerate_autotooling_patch 0 : the normal approach: prep the +# source tree using a pre-generated patch to the "configure" script, and do a +# full build +# (ii) regenerate_autotooling_patch 1 : intended to be run on a developer's +# workstation: prep the source tree without patching configure, then rerun a +# local copy of autoconf-2.65, regenerate the patch, then exit, without doing +# the rest of the build +%global regenerate_autotooling_patch 0 + + +# ================== +# Top-level metadata +# ================== +Summary: Version 3 of the Python programming language aka Python 3000 +Name: python%{pyshortver} +Version: %{pybasever}.3 +Release: 2%{?dist} +License: Python +Group: Development/Languages + + +# ======================= +# Build-time requirements +# ======================= + +# (keep this list alphabetized) + +BuildRequires: autoconf +BuildRequires: bluez-libs-devel +BuildRequires: bzip2 +BuildRequires: bzip2-devel +BuildRequires: db4-devel >= 4.7 + +# expat 2.1.0 added the symbol XML_SetHashSalt without bumping SONAME. We use +# it (in pyexpat) in order to enable the fix in Python-3.2.3 for CVE-2012-0876: +BuildRequires: expat-devel >= 2.1.0 + +BuildRequires: findutils +BuildRequires: gcc-c++ +%if %{with_gdbm} +BuildRequires: gdbm-devel +%endif +BuildRequires: glibc-devel +BuildRequires: gmp-devel +BuildRequires: libffi-devel +BuildRequires: libGL-devel +BuildRequires: libX11-devel +BuildRequires: ncurses-devel +# workaround http://bugs.python.org/issue19804 (test_uuid requires ifconfig) +BuildRequires: net-tools +BuildRequires: openssl-devel +BuildRequires: pkgconfig +BuildRequires: readline-devel +BuildRequires: sqlite-devel + +%if 0%{?with_systemtap} +BuildRequires: systemtap-sdt-devel +# (this introduces a dependency on "python", in that systemtap-sdt-devel's +# /usr/bin/dtrace is a python 2 script) +%global tapsetdir /usr/share/systemtap/tapset +%endif # with_systemtap + +BuildRequires: tar +BuildRequires: tcl-devel +BuildRequires: tix-devel +BuildRequires: tk-devel + +%if 0%{?with_valgrind} +BuildRequires: valgrind-devel +%endif + +BuildRequires: xz-devel +BuildRequires: zlib-devel + +%if 0%{?with_rewheel} +BuildRequires: python%{pyshortver}-setuptools +BuildRequires: python%{pyshortver}-pip +%endif + + +# ======================= +# Source code and patches +# ======================= + +Source: http://www.python.org/ftp/python/%{version}/Python-%{version}.tar.xz + +# Avoid having various bogus auto-generated Provides lines for the various +# python c modules' SONAMEs: +Source1: find-provides-without-python-sonames.sh +%global _use_internal_dependency_generator 0 +%global __find_provides %{SOURCE1} + +# Supply various useful macros for building python 3 modules: +# __python3, python3_sitelib, python3_sitearch +Source2: macros.python%{pybasever} + +# Supply an RPM macro "py_byte_compile" for the python3-devel subpackage +# to enable specfiles to selectively byte-compile individual files and paths +# with different Python runtimes as necessary: +Source3: macros.pybytecompile%{pybasever} + +# Systemtap tapset to make it easier to use the systemtap static probes +# (actually a template; LIBRARY_PATH will get fixed up during install) +# Written by dmalcolm; not yet sent upstream +Source5: libpython.stp + +# Example systemtap script using the tapset +# Written by wcohen, mjw, dmalcolm; not yet sent upstream +Source6: systemtap-example.stp + +# Another example systemtap script that uses the tapset +# Written by dmalcolm; not yet sent upstream +Source7: pyfuntop.stp + +# A simple script to check timestamps of bytecode files +# Run in check section with Python that is currently being built +# Written by bkabrda +Source8: check-pyc-and-pyo-timestamps.py + +# Fixup distutils/unixccompiler.py to remove standard library path from rpath: +# Was Patch0 in ivazquez' python3000 specfile: +Patch1: Python-3.1.1-rpath.patch + +# Some tests were removed due to audiotest.au not being packaged. This was +# however added to the archive in 3.3.1, so we no longer delete the tests. +# Patch3: 00003-remove-mimeaudio-tests.patch + +# 00055 # +# Systemtap support: add statically-defined probe points +# Patch sent upstream as http://bugs.python.org/issue14776 +# with some subsequent reworking to cope with LANG=C in an rpmbuild +# (where sys.getfilesystemencoding() == 'ascii') +Patch55: 00055-systemtap.patch + +Patch102: 00102-lib64.patch + +# 00104 # +# Only used when "%{_lib}" == "lib64" +# Another lib64 fix, for distutils/tests/test_install.py; not upstream: +Patch104: 00104-lib64-fix-for-test_install.patch + +# 00111 # +# Patch the Makefile.pre.in so that the generated Makefile doesn't try to build +# a libpythonMAJOR.MINOR.a (bug 550692): +# Downstream only: not appropriate for upstream +Patch111: 00111-no-static-lib.patch + +# 00112 # +# Patch112: python-2.7rc1-debug-build.patch: this is not relevant to Python 3, +# for 3.2 onwards + +# 00113 # +# Add configure-time support for the COUNT_ALLOCS and CALL_PROFILE options +# described at http://svn.python.org/projects/python/trunk/Misc/SpecialBuilds.txt +# so that if they are enabled, they will be in that build's pyconfig.h, so that +# extension modules will reliably use them +# Not yet sent upstream +Patch113: 00113-more-configuration-flags.patch + +# 00114 # +# Upstream as of Python 3.4.0.b2 +# Patch114: 00114-statvfs-f_flag-constants.patch + +# 00125 # +# COUNT_ALLOCS is useful for debugging, but the upstream behaviour of always +# emitting debug info to stdout on exit is too verbose and makes it harder to +# use the debug build. Add a "PYTHONDUMPCOUNTS" environment variable which +# must be set to enable the output on exit +# Not yet sent upstream +Patch125: 00125-less-verbose-COUNT_ALLOCS.patch + +# 00130 # +# Python 2's: +# Patch130: python-2.7.2-add-extension-suffix-to-python-config.patch +# is not relevant to Python 3 (for 3.2 onwards) + +# 00131 # +# The four tests in test_io built on top of check_interrupted_write_retry +# fail when built in Koji, for ppc and ppc64; for some reason, the SIGALRM +# handlers are never called, and the call to write runs to completion +# (rhbz#732998) +Patch131: 00131-disable-tests-in-test_io.patch + +# 00132 # +# Add non-standard hooks to unittest for use in the "check" phase below, when +# running selftests within the build: +# @unittest._skipInRpmBuild(reason) +# for tests that hang or fail intermittently within the build environment, and: +# @unittest._expectedFailureInRpmBuild +# for tests that always fail within the build environment +# +# The hooks only take effect if WITHIN_PYTHON_RPM_BUILD is set in the +# environment, which we set manually in the appropriate portion of the "check" +# phase below (and which potentially other python-* rpms could set, to reuse +# these unittest hooks in their own "check" phases) +Patch132: 00132-add-rpmbuild-hooks-to-unittest.patch + +# 00133 # +# 00133-skip-test_dl.patch is not relevant for python3: the "dl" module no +# longer exists + +# 00134 # +# Fix a failure in test_sys.py when configured with COUNT_ALLOCS enabled +# Not yet sent upstream +Patch134: 00134-fix-COUNT_ALLOCS-failure-in-test_sys.patch + +# 00135 # +# test_weakref's test_callback_in_cycle_resurrection doesn't work with +# COUNT_ALLOCS, as the metrics keep "C" alive. Work around this for our +# debug build: +# Not yet sent upstream +Patch135: 00135-fix-test-within-test_weakref-in-debug-build.patch + +# 00136 # +# Patch136: 00136-skip-tests-of-seeking-stdin-in-rpmbuild.patch does not seem +# to be needed by python3 + +# 00137 # +# Some tests within distutils fail when run in an rpmbuild: +Patch137: 00137-skip-distutils-tests-that-fail-in-rpmbuild.patch + +# 00138 # +# Patch138: 00138-fix-distutils-tests-in-debug-build.patch is not relevant for +# python3 + +# 00139 # +# ARM-specific: skip known failure in test_float: +# http://bugs.python.org/issue8265 (rhbz#706253) +Patch139: 00139-skip-test_float-known-failure-on-arm.patch + +# ideally short lived patch disabling a test thats fragile on different arches +Patch140: python3-arm-skip-failing-fragile-test.patch + +# Patch140: 00140-skip-test_ctypes-known-failure-on-sparc.patch does not appear +# to be relevant for python3 + +# 00141 # +# Fix tests for case when tests for case when configured with +# COUNT_ALLOCS (debug build): http://bugs.python.org/issue19527 +# Applies to: test_gc, test_module, test_io, test_logging, test_warnings, +# test_threading +Patch141: 00141-fix-tests_with_COUNT_ALLOCS.patch + +# 00143 # +# Fix the --with-tsc option on ppc64, and rework it on 32-bit ppc to avoid +# aliasing violations (rhbz#698726) +# Sent upstream as http://bugs.python.org/issue12872 +Patch143: 00143-tsc-on-ppc.patch + +# 00144 # +# (Optionally) disable the gdbm module: +# python.spec's +# Patch144: 00144-no-gdbm.patch +# is not needed in python3.spec + +# 00145 # +# python.spec's +# Patch145: 00145-force-sys-platform-to-be-linux2.patch +# is upstream for Python 3 as of 3.2.2 + +# 00146 # +# Support OpenSSL FIPS mode (e.g. when OPENSSL_FORCE_FIPS_MODE=1 is set) +# - handle failures from OpenSSL (e.g. on attempts to use MD5 in a +# FIPS-enforcing environment) +# - add a new "usedforsecurity" keyword argument to the various digest +# algorithms in hashlib so that you can whitelist a callsite with +# "usedforsecurity=False" +# (sent upstream for python 3 as http://bugs.python.org/issue9216 ; see RHEL6 +# python patch 119) +# - enforce usage of the _hashlib implementation: don't fall back to the _md5 +# and _sha* modules (leading to clearer error messages if fips selftests +# fail) +# - don't build the _md5 and _sha* modules; rely on the _hashlib implementation +# of hashlib +# (rhbz#563986) +# Note: Up to Python 3.4.0.b1, upstream had their own implementation of what +# they assumed would become sha3. This patch was adapted to give it the +# usedforsecurity argument, even though it did nothing (OpenSSL didn't have +# sha3 implementation at that time).In 3.4.0.b2, sha3 implementation was reverted +# (see http://bugs.python.org/issue16113), but the alterations were left in the +# patch, since they may be useful again if upstream decides to rerevert sha3 +# implementation and OpenSSL still doesn't support it. For now, they're harmless. +Patch146: 00146-hashlib-fips.patch + +# 00147 # +# Add a sys._debugmallocstats() function +# Sent upstream as http://bugs.python.org/issue14785 +# Upstream as of Python 3.3.0 +# Patch147: 00147-add-debug-malloc-stats.patch + +# 00148 # +# Upstream as of Python 3.2.3: +# Patch148: 00148-gdbm-1.9-magic-values.patch + +# 00149 # +# Upstream as of Python 3.2.3: +# Patch149: 00149-backport-issue11254-pycache-bytecompilation-fix.patch + +# 00150 # +# temporarily disable rAssertAlmostEqual in test_cmath on PPC (bz #750811) +# caused by a glibc bug. This patch can be removed when we have a glibc with +# the patch mentioned here: +# http://sourceware.org/bugzilla/show_bug.cgi?id=13472 +Patch150: 00150-disable-rAssertAlmostEqual-cmath-on-ppc.patch + +# 00151 # +# python.spec had: +# Patch151: 00151-fork-deadlock.patch + +# 00152 # +# Fix a regex in test_gdb so that it doesn't choke when gdb provides a full +# path to Python/bltinmodule.c: +# Committed upstream as 77824:abcd29c9a791 as part of fix for +# http://bugs.python.org/issue12605 +# Patch152: 00152-fix-test-gdb-regex.patch + +# 00153 # +# Strip out lines of the form "warning: Unable to open ..." from gdb's stderr +# when running test_gdb.py; also cope with change to gdb in F17 onwards in +# which values are printed as "v@entry" rather than just "v": +# Upstream as of 3.4.3 +# Patch153: 00153-fix-test_gdb-noise.patch + +# 00154 # +# python3.spec on f15 has: +# Patch154: 00154-skip-urllib-test-requiring-working-DNS.patch + +# 00155 # +# Avoid allocating thunks in ctypes unless absolutely necessary, to avoid +# generating SELinux denials on "import ctypes" and "import uuid" when +# embedding Python within httpd (rhbz#814391) +Patch155: 00155-avoid-ctypes-thunks.patch + +# 00156 # +# Recent builds of gdb will only auto-load scripts from certain safe +# locations. Turn off this protection when running test_gdb in the selftest +# suite to ensure that it can load our -gdb.py script (rhbz#817072): +# Upstream as of 3.4.3 +# Patch156: 00156-gdb-autoload-safepath.patch + +# 00157 # +# Update uid/gid handling throughout the standard library: uid_t and gid_t are +# unsigned 32-bit values, but existing code often passed them through C long +# values, which are signed 32-bit values on 32-bit architectures, leading to +# negative int objects for uid/gid values >= 2^31 on 32-bit architectures. +# +# Introduce _PyObject_FromUid/Gid to convert uid_t/gid_t values to python +# objects, using int objects where the value will fit (long objects otherwise), +# and _PyArg_ParseUid/Gid to convert int/long to uid_t/gid_t, with -1 allowed +# as a special case (since this is given special meaning by the chown syscall) +# +# Update standard library to use this throughout for uid/gid values, so that +# very large uid/gid values are round-trippable, and -1 remains usable. +# (rhbz#697470) +Patch157: 00157-uid-gid-overflows.patch + +# 00158 # +# Upstream as of Python 3.3.1 + +# 00159 # +# Patch159: 00159-correct-libdb-include-path.patch +# in python.spec +# TODO: python3 status? + +# 00160 # +# Python 3.3 added os.SEEK_DATA and os.SEEK_HOLE, which may be present in the +# header files in the build chroot, but may not be supported in the running +# kernel, hence we disable this test in an rpm build. +# Adding these was upstream issue http://bugs.python.org/issue10142 +# Not yet sent upstream +Patch160: 00160-disable-test_fs_holes-in-rpm-build.patch + +# 00161 # +# (Was only needed for Python 3.3.0b1) + +# 00162 # +# (Was only needed for Python 3.3.0b1) + +# 00163 # +# Some tests within test_socket fail intermittently when run inside Koji; +# disable them using unittest._skipInRpmBuild +# Not yet sent upstream +Patch163: 00163-disable-parts-of-test_socket-in-rpm-build.patch + +# 0164 # +# some tests in test._io interrupted_write-* fail on PPC (rhbz#846849) +# testChainingDescriptors test in test_exceptions fails on PPc, too (rhbz#846849) +# disable those tests so that rebuilds on PPC can continue +Patch164: 00164-disable-interrupted_write-tests-on-ppc.patch + +# 00165 # +# python.spec has: +# Patch165: 00165-crypt-module-salt-backport.patch +# which is a backport from 3.3 and thus not relevant to "python3" + +# 00166 # +# Patch166: 00166-fix-fake-repr-in-gdb-hooks.patch +# in python.spec +# TODO: python3 status? + +# 00167 # +# Patch167: 00167-disable-stack-navigation-tests-when-optimized-in-test_gdb.patch +# in python.spec +# TODO: python3 status? + +# 00168 # +# Patch168: 00168-distutils-cflags.patch +# in python.spec +# TODO: python3 status? + +# 00169 # +# Patch169: 00169-avoid-implicit-usage-of-md5-in-multiprocessing.patch +# in python.spec +# TODO: python3 status? + +# 00170 # +# In debug builds, try to print repr() when a C-level assert fails in the +# garbage collector (typically indicating a reference-counting error +# somewhere else e.g in an extension module) +# Backported to 2.7 from a patch I sent upstream for py3k +# http://bugs.python.org/issue9263 (rhbz#614680) +# hiding the proposed new macros/functions within gcmodule.c to avoid exposing +# them within the extension API. +# (rhbz#850013 +Patch170: 00170-gc-assertions.patch + +# 00171 # +# python.spec had: +# Patch171: 00171-raise-correct-exception-when-dev-urandom-is-missing.patch +# TODO: python3 status? + +# 00172 # +# python.spec had: +# Patch172: 00172-use-poll-for-multiprocessing-socket-connection.patch +# TODO: python3 status? + +# 00173 # +# Workaround for ENOPROTOOPT seen in Koji withi test.support.bind_port() +# (rhbz#913732) +Patch173: 00173-workaround-ENOPROTOOPT-in-bind_port.patch + +# 00174 # +# Patch174: 00174-fix-for-usr-move.patch +# TODO: python3 status? + +# 00175 # +# Upstream as of Python 3.3.2 +# Patch175: 00175-fix-configure-Wformat.patch + +# 00176 # +# Fixed upstream as of Python 3.3.1 +# Patch176: 00176-upstream-issue16754-so-extension.patch + +# 00177 # +# Fixed upstream as of Python 3.4.0.b2 +# Patch177: 00177-platform-unicode.patch + +# 00178 # +# Don't duplicate various FLAGS in sysconfig values +# http://bugs.python.org/issue17679 +# Does not affect python2 AFAICS (different sysconfig values initialization) +Patch178: 00178-dont-duplicate-flags-in-sysconfig.patch + +# 00179 # +# Workaround for https://bugzilla.redhat.com/show_bug.cgi?id=951802 +# Reported upstream in http://bugs.python.org/issue17737 +# This patch basically looks at every frame and if it is somehow corrupted, +# it just stops printing the traceback - it doesn't fix the actual bug. +# This bug seems to only affect ARM. +# Doesn't seem to affect Python 2 AFAICS. +Patch179: 00179-dont-raise-error-on-gdb-corrupted-frames-in-backtrace.patch + +# 00180 # +# Enable building on ppc64p7 +# Not appropriate for upstream, Fedora-specific naming +Patch180: 00180-python-add-support-for-ppc64p7.patch + +# 00181 # +# python.spec has +# Patch181: 00181-allow-arbitrary-timeout-in-condition-wait.patch +# Does not affect python3 + +# 00182 # +# Fixed upstream as of Python 3.3.2 +# Patch182: 00182-fix-test_gdb-test_threads.patch + +# 00183 # +# Fixed upstream as of Python 3.4.0a4 +# Patch183: 00183-cve-2013-2099-fix-ssl-match_hostname-dos.patch + +# 00184 # +# Fix for https://bugzilla.redhat.com/show_bug.cgi?id=979696 +# Fixes build of ctypes against libffi with multilib wrapper +# Python recognizes ffi.h only if it contains "#define LIBFFI_H", +# but the wrapper doesn't contain that, which makes the build fail +# We patch this by also accepting "#define ffi_wrapper_h" +Patch184: 00184-ctypes-should-build-with-libffi-multilib-wrapper.patch + +# 00185 # +# Fixed upstream as of Python 3.4.0a4 +# Patch185: 00185-CVE-2013-4238-hostname-check-bypass-in-SSL-module.patch + +# 00186 # +# Fix for https://bugzilla.redhat.com/show_bug.cgi?id=1023607 +# Previously, this fixed a problem where some *.py files were not being +# bytecompiled properly during build. This was result of py_compile.compile +# raising exception when trying to convert test file with bad encoding, and +# thus not continuing bytecompilation for other files. +# This was fixed upstream, but the test hasn't been merged yet, so we keep it +Patch186: 00186-dont-raise-from-py_compile.patch + +# 00187 # +# Fixed upstream as of Python 3.4.0b1 +# Patch187: 00187-remove-pthread-atfork.patch + +# 00188 # +# Downstream only patch that should be removed when we compile all guaranteed +# hashlib algorithms properly. The problem is this: +# - during tests, test_hashlib is imported and executed before test_lib2to3 +# - if at least one hash function has failed, trying to import it triggers an +# exception that is being caught and exception is logged: +# http://hg.python.org/cpython/file/2de806c8b070/Lib/hashlib.py#l217 +# - logging the exception makes logging module run basicConfig +# - when lib2to3 tests are run again, lib2to3 runs basicConfig again, which +# doesn't do anything, because it was run previously +# (logging.root.handlers != []), which means that the default setup +# (most importantly logging level) is not overriden. That means that a test +# relying on this will fail (test_filename_changing_on_output_single_dir) +Patch188: 00188-fix-lib2to3-tests-when-hashlib-doesnt-compile-properly.patch + +# 00189 # +# +# Add the rewheel module, allowing to recreate wheels from already installed +# ones +# https://github.com/bkabrda/rewheel +%if 0%{with_rewheel} +Patch189: 00189-add-rewheel-module.patch +%endif + +# 00190 # +# +# Fix tests with SQLite >= 3.8.4 +# http://bugs.python.org/issue20901 +# http://hg.python.org/cpython/rev/4d626a9df062 +# FIXED UPSTREAM +# Patch190: 00190-fix-tests-with-sqlite-3.8.4.patch + +# 00193 +# +# Skip correct number of *.pyc file bytes in ModuleFinder.load_module +# rhbz#1060338 +# http://bugs.python.org/issue20778 +# FIXED UPSTREAM +# Patch193: 00193-skip-correct-num-of-pycfile-bytes-in-modulefinder.patch + +# Tests requiring SIGHUP to work don't work in Koji +# see rhbz#1088233 +Patch194: temporarily-disable-tests-requiring-SIGHUP.patch + +# 00195 +# +# Don't declare Werror=declaration-after-statement for extension +# modules through setup.py +# http://bugs.python.org/issue21121 +# FIXED UPSTREAM +# Patch195: 00195-dont-add-Werror-declaration-after-statement.patch + +# 00196 +# +# Fix test_gdb failure on ppc64le +Patch196: 00196-test-gdb-match-addr-before-builtin.patch + +# 00197 +# +# The CGIHTTPServer Python module did not properly handle URL-encoded +# path separators in URLs. This may have enabled attackers to disclose a CGI +# script's source code or execute arbitrary scripts in the server's +# document root. +# FIXED UPSTREAM +# Patch197: 00197-fix-CVE-2014-4650.patch + +# OpenSSL disabled SSLv3 in SSLv23 method +# This patch alters python tests to reflect this change +# Issue: http://bugs.python.org/issue22638 Upstream discussion about SSLv3 in Python +# OpenSSL in RHEL has SSLv3 enabled +#Patch199: 00199-alter-tests-to-reflect-sslv3-disabled.patch + +# 00200 # +# Fix for gettext plural form headers (lines that begin with "#") +# Note: Backported from scl +Patch200: 00200-gettext-plural-fix.patch + +# 00201 # +# Fixes memory leak in gdbm module (rhbz#977308) +# This was upstreamed as a part of bigger patch, but for our purposes +# this is ok: http://bugs.python.org/issue18404 +# Note: Backported from scl +Patch201: 00201-fix-memory-leak-in-gdbm.patch + +# 00202 # +# Fixes undefined behaviour in faulthandler which caused tests to hang in on x86_64 +# http://bugs.python.org/issue23433 +Patch202: 00202-fix-undefined-behaviour-in-faulthandler.patch + +# test_threading fails in koji dues to it's handling of signals +Patch203: 00203-disable-threading-test-koji.patch + +# openssl requires DH keys to be > 768bits +Patch204: 00204-increase-dh-keys-size.patch + +# (New patches go here ^^^) +# +# When adding new patches to "python" and "python3" in Fedora 17 onwards, +# please try to keep the patch numbers in-sync between the two specfiles: +# +# - use the same patch number across both specfiles for conceptually-equivalent +# fixes, ideally with the same name +# +# - when a patch is relevant to both specfiles, use the same introductory +# comment in both specfiles where possible (to improve "diff" output when +# comparing them) +# +# - when a patch is only relevant for one of the two specfiles, leave a gap +# in the patch numbering in the other specfile, adding a comment when +# omitting a patch, both in the manifest section here, and in the "prep" +# phase below +# +# Hopefully this will make it easier to ensure that all relevant fixes are +# applied to both versions. + +# This is the generated patch to "configure"; see the description of +# %{regenerate_autotooling_patch} +# above: +Patch5000: 05000-autotool-intermediates.patch + +BuildRoot: %{_tmppath}/%{name}-%{version}-root + +# ====================================================== +# Additional metadata, and subpackages +# ====================================================== + +URL: http://www.python.org/ + +# See notes in bug 532118: +Provides: python(abi) = %{pybasever} + +Requires: %{name}-libs%{?_isa} = %{version}-%{release} + +%if 0%{with_rewheel} +Requires: python%{pyshortver}-setuptools +Requires: python%{pyshortver}-pip +%endif + +%description +Python 3 is a new version of the language that is incompatible with the 2.x +line of releases. The language is mostly the same, but many details, especially +how built-in objects like dictionaries and strings work, have changed +considerably, and a lot of deprecated features have finally been removed. + +%package libs +Summary: Python 3 runtime libraries +Group: Development/Libraries +#Requires: %{name} = %{version}-%{release} + +# expat 2.1.0 added the symbol XML_SetHashSalt without bumping SONAME. We use +# this symbol (in pyexpat), so we must explicitly state this dependency to +# prevent "import pyexpat" from failing with a linker error if someone hasn't +# yet upgraded expat: +Requires: expat >= 2.1.0 + +%description libs +This package contains files used to embed Python 3 into applications. + +%package devel +Summary: Libraries and header files needed for Python 3 development +Group: Development/Libraries +Requires: %{name} = %{version}-%{release} +Requires: %{name}-libs%{?_isa} = %{version}-%{release} +Conflicts: %{name} < %{version}-%{release} + +%description devel +This package contains libraries and header files used to build applications +with and native libraries for Python 3 + +%package tools +Summary: A collection of tools included with Python 3 +Group: Development/Tools +Requires: %{name} = %{version}-%{release} +Requires: %{name}-tkinter = %{version}-%{release} + +%description tools +This package contains several tools included with Python 3 + +%package tkinter +Summary: A GUI toolkit for Python 3 +Group: Development/Languages +Requires: %{name} = %{version}-%{release} + +%description tkinter +The Tkinter (Tk interface) program is an graphical user interface for +the Python scripting language. + +%package test +Summary: The test modules from the main python 3 package +Group: Development/Languages +Requires: %{name} = %{version}-%{release} +Requires: %{name}-tools = %{version}-%{release} + +%description test +The test modules from the main %{name} package. +These are in a separate package to save space, as they are almost never used +in production. + +You might want to install the python%{pyshortver}-test package if you're developing +python 3 code that uses more than just unittest and/or test_support.py. + +%if 0%{?with_debug_build} +%package debug +Summary: Debug version of the Python 3 runtime +Group: Applications/System + +# The debug build is an all-in-one package version of the regular build, and +# shares the same .py/.pyc files and directories as the regular build. Hence +# we depend on all of the subpackages of the regular build: +Requires: %{name}%{?_isa} = %{version}-%{release} +Requires: %{name}-libs%{?_isa} = %{version}-%{release} +Requires: %{name}-devel%{?_isa} = %{version}-%{release} +Requires: %{name}-test%{?_isa} = %{version}-%{release} +Requires: %{name}-tkinter%{?_isa} = %{version}-%{release} +Requires: %{name}-tools%{?_isa} = %{version}-%{release} + +%description debug +python%{pyshortver}-debug provides a version of the Python 3 runtime with numerous debugging +features enabled, aimed at advanced Python users, such as developers of Python +extension modules. + +This version uses more memory and will be slower than the regular Python 3 build, +but is useful for tracking down reference-counting issues, and other bugs. + +The bytecodes are unchanged, so that .pyc files are compatible between the two +versions of Python 3, but the debugging features mean that C/C++ extension +modules are ABI-incompatible with those built for the standard runtime. + +It shares installation directories with the standard Python 3 runtime, so that +.py and .pyc files can be shared. All compiled extension modules gain a "_d" +suffix ("foo_d.so" rather than "foo.so") so that each Python 3 implementation +can load its own extensions. +%endif # with_debug_build + +# ====================================================== +# The prep phase of the build: +# ====================================================== + +%prep +%setup -q -n Python-%{version}%{?prerel} +chmod +x %{SOURCE1} + +%if 0%{?with_systemtap} +# Provide an example of usage of the tapset: +cp -a %{SOURCE6} . +cp -a %{SOURCE7} . +%endif # with_systemtap + +# Ensure that we're using the system copy of various libraries, rather than +# copies shipped by upstream in the tarball: +# Remove embedded copy of expat: +rm -r Modules/expat || exit 1 + +# Remove embedded copy of libffi: +for SUBDIR in darwin libffi libffi_arm_wince libffi_msvc libffi_osx ; do + rm -r Modules/_ctypes/$SUBDIR || exit 1 ; +done + +# Remove embedded copy of zlib: +rm -r Modules/zlib || exit 1 + +# Don't build upstream Python's implementation of these crypto algorithms; +# instead rely on _hashlib and OpenSSL. +# +# For example, in our builds hashlib.md5 is implemented within _hashlib via +# OpenSSL (and thus respects FIPS mode), and does not fall back to _md5 +# TODO: there seems to be no OpenSSL support in Python for sha3 so far +# when it is there, also remove _sha3/ dir +for f in md5module.c sha1module.c sha256module.c sha512module.c; do + rm Modules/$f +done + +# Since we unbundle pip, our version is different from upstream +%if 0%{with_rewheel} +%global pip_version 7.0.3 +sed -r -i s/'_PIP_VERSION = "[0-9.]+"'/'_PIP_VERSION = "%{pip_version}"'/ Lib/ensurepip/__init__.py +%endif + +# +# Apply patches: +# +%patch1 -p1 +# 3: upstream as of Python 3.3.1 + +%if 0%{?with_systemtap} +%patch55 -p1 -b .systemtap +%endif + +%if "%{_lib}" == "lib64" +%patch102 -p1 +%patch104 -p1 +%endif + + +%patch111 -p1 +# 112: not for python3 +%patch113 -p1 +# 00114: Upstream as of Python 3.4.0.b2 + +%patch125 -p1 -b .less-verbose-COUNT_ALLOCS + +%ifarch ppc %{power64} +%patch131 -p1 +%endif + +%patch132 -p1 +# 00133: not for python3 +%patch134 -p1 +%patch135 -p1 +# 00136: not for python3 +%patch137 -p1 +# 00138: not for python3 +%ifarch %{arm} +%patch139 -p1 +%patch140 -p1 +%endif +# 00140: not for python3 +%patch141 -p1 +%patch143 -p1 -b .tsc-on-ppc +# 00144: not for python3 +# 00145: not for python3 +%patch146 -p1 +# 00147: upstream as of Python 3.3.0 +# 00148: upstream as of Python 3.2.3 +# 00149: upstream as of Python 3.2.3 +%ifarch ppc %{power64} +%patch150 -p1 +%endif +# 00151: not for python3 +# 00152: upstream as of Python 3.3.0b2 +# 00153: upstream as of Python 3.4.3 +# 00154: not for this branch +%patch155 -p1 +# 00156: upstream as of 3.4.3 +%patch157 -p1 +#00158: FIXME +#00159: FIXME +%patch160 -p1 +# 00161: was only needed for Python 3.3.0b1 +# 00162: was only needed for Python 3.3.0b1 +%patch163 -p1 +%ifarch ppc %{power64} +%patch164 -p1 +%endif +#00165: TODO +#00166: TODO +#00167: TODO +#00168: TODO +#00169: TODO +#00170: TODO +#00171: TODO +#00172: TODO +%patch173 -p1 +#00174: TODO +# 00175: upstream as of Python 3.3.2 +# 00176: upstream as of Python 3.3.1 +# 00177: upstream as of Python 3.4.0.b2 +%patch178 -p1 +%patch179 -p1 +%patch180 -p1 +# 00181: not for python3 +# 00182: upstream as of Python 3.3.2 +# 00183 upstream as of Python 3.4.0a4 +%patch184 -p1 +# 00185 upstream as of Python 3.4.0a4 +%patch186 -p1 +# 00187: upstream as of Python 3.4.0b1 +%patch188 -p1 + +%if 0%{with_rewheel} +%patch189 -p1 +%endif + +# 00190: upstream as of Python 3.4.1 +# 00193: upstream as of Python 3.4.1 +%patch194 -p1 +# 00195: upstream as of Python 3.4.2 +%patch196 -p1 +# 00197: upstream as of Python 3.4.2 +# 00199: doesn't apply to RHEL 7 +%patch202 -p1 +%patch203 -p1 +%patch204 -p1 + + +# Currently (2010-01-15), http://docs.python.org/library is for 2.6, and there +# are many differences between 2.6 and the Python 3 library. +# +# Fix up the URLs within pydoc to point at the documentation for this +# MAJOR.MINOR version: +# +sed --in-place \ + --expression="s|http://docs.python.org/library|http://docs.python.org/%{pybasever}/library|g" \ + Lib/pydoc.py || exit 1 + +%if ! 0%{regenerate_autotooling_patch} +# Normally we apply the patch to "configure" +# We don't apply the patch if we're working towards regenerating it +%patch5000 -p0 -b .autotool-intermediates +%endif + +# ====================================================== +# Configuring and building the code: +# ====================================================== + +%build +topdir=$(pwd) +export CFLAGS="$RPM_OPT_FLAGS -D_GNU_SOURCE -fPIC -fwrapv" +export CXXFLAGS="$RPM_OPT_FLAGS -D_GNU_SOURCE -fPIC -fwrapv" +export CPPFLAGS="`pkg-config --cflags-only-I libffi`" +export OPT="$RPM_OPT_FLAGS -D_GNU_SOURCE -fPIC -fwrapv" +export LINKCC="gcc" +export CFLAGS="$CFLAGS `pkg-config --cflags openssl`" +export LDFLAGS="$RPM_LD_FLAGS `pkg-config --libs-only-L openssl`" + +%if 0%{regenerate_autotooling_patch} +# If enabled, this code regenerates the patch to "configure", using a +# local copy of autoconf-2.65, then exits the build +# +# The following assumes that the copy is installed to ~/autoconf-2.65/bin +# as per these instructions: +# http://bugs.python.org/issue7997 + +for f in pyconfig.h.in configure ; do + cp $f $f.autotool-intermediates ; +done + +# Rerun the autotools: +autoreconf + +# Regenerate the patch: +gendiff . .autotool-intermediates > %{PATCH5000} + + +# Exit the build +exit 1 +%endif + +# Define a function, for how to perform a "build" of python for a given +# configuration: +BuildPython() { + ConfName=$1 + BinaryName=$2 + SymlinkName=$3 + ExtraConfigArgs=$4 + PathFixWithThisBinary=$5 + MoreCFlags=$6 + + ConfDir=build/$ConfName + + echo STARTING: BUILD OF PYTHON FOR CONFIGURATION: $ConfName - %{_bindir}/$BinaryName + mkdir -p $ConfDir + + pushd $ConfDir + + # Use the freshly created "configure" script, but in the directory two above: + %global _configure $topdir/configure + +%configure \ + --enable-ipv6 \ + --enable-shared \ + --with-computed-gotos=%{with_computed_gotos} \ + --with-dbmliborder=gdbm:ndbm:bdb \ + --with-system-expat \ + --with-system-ffi \ + --enable-loadable-sqlite-extensions \ +%if 0%{?with_systemtap} + --with-systemtap \ +%endif +%if 0%{?with_valgrind} + --with-valgrind \ +%endif + $ExtraConfigArgs \ + %{nil} + + # Set EXTRA_CFLAGS to our CFLAGS (rather than overriding OPT, as we've done + # in the past). + # This should fix a problem with --with-valgrind where it adds + # -DDYNAMIC_ANNOTATIONS_ENABLED=1 + # to OPT which must be passed to all compilation units in the build, + # otherwise leading to linker errors, e.g. + # missing symbol AnnotateRWLockDestroy + # + # Invoke the build: + make EXTRA_CFLAGS="$CFLAGS $MoreCFlags" %{?_smp_mflags} + + popd + echo FINISHED: BUILD OF PYTHON FOR CONFIGURATION: $ConfDir +} + +# Use "BuildPython" to support building with different configurations: + +%if 0%{?with_debug_build} +BuildPython debug \ + python-debug \ + python%{pybasever}-debug \ +%ifarch %{ix86} x86_64 ppc %{power64} + "--with-pydebug --with-tsc --with-count-allocs --with-call-profile --without-ensurepip" \ +%else + "--with-pydebug --with-count-allocs --with-call-profile --without-ensurepip" \ +%endif + false \ + -O0 +%endif # with_debug_build + +BuildPython optimized \ + python \ + python%{pybasever} \ + "--without-ensurepip" \ + true + +# ====================================================== +# Installing the built code: +# ====================================================== + +%install +topdir=$(pwd) +rm -fr %{buildroot} +mkdir -p %{buildroot}%{_prefix} %{buildroot}%{_mandir} + +InstallPython() { + + ConfName=$1 + PyInstSoName=$2 + MoreCFlags=$3 + + ConfDir=build/$ConfName + + echo STARTING: INSTALL OF PYTHON FOR CONFIGURATION: $ConfName + mkdir -p $ConfDir + + pushd $ConfDir + +%if 0%{?main_python3} +make install \ +%else +make altinstall \ +%endif + DESTDIR=%{buildroot} INSTALL="install -p" EXTRA_CFLAGS="$MoreCFlags" + + popd + + # We install a collection of hooks for gdb that make it easier to debug + # executables linked against libpython3* (such as /usr/bin/python3 itself) + # + # These hooks are implemented in Python itself (though they are for the version + # of python that gdb is linked with, in this case Python 2.7) + # + # gdb-archer looks for them in the same path as the ELF file, with a -gdb.py suffix. + # We put them in the debuginfo package by installing them to e.g.: + # /usr/lib/debug/usr/lib/libpython3.2.so.1.0.debug-gdb.py + # + # See https://fedoraproject.org/wiki/Features/EasierPythonDebugging for more + # information + # + # Copy up the gdb hooks into place; the python file will be autoloaded by gdb + # when visiting libpython.so, provided that the python file is installed to the + # same path as the library (or its .debug file) plus a "-gdb.py" suffix, e.g: + # /usr/lib/debug/usr/lib64/libpython3.2.so.1.0.debug-gdb.py + # (note that the debug path is /usr/lib/debug for both 32/64 bit) + # + # Initially I tried: + # /usr/lib/libpython3.1.so.1.0-gdb.py + # but doing so generated noise when ldconfig was rerun (rhbz:562980) + # +%if 0%{?with_gdb_hooks} + DirHoldingGdbPy=%{_prefix}/lib/debug/%{_libdir} + PathOfGdbPy=$DirHoldingGdbPy/$PyInstSoName.debug-gdb.py + + mkdir -p %{buildroot}$DirHoldingGdbPy + cp Tools/gdb/libpython.py %{buildroot}$PathOfGdbPy +%endif # with_gdb_hooks + + echo FINISHED: INSTALL OF PYTHON FOR CONFIGURATION: $ConfName +} + +# Use "InstallPython" to support building with different configurations: + +# Install the "debug" build first, so that we can move some files aside +%if 0%{?with_debug_build} +InstallPython debug \ + %{py_INSTSONAME_debug} \ + -O0 + +%if ! 0%{?main_python3} +# altinstall only creates pkgconfig/python-3.4.pc, not the version with ABIFAGS, +# so we need to move the debug .pc file to not overwrite it by optimized install +mv \ + %{buildroot}%{_libdir}/pkgconfig/python-%{pybasever}.pc \ + %{buildroot}%{_libdir}/pkgconfig/python-%{LDVERSION_debug}.pc +%endif + +%endif # with_debug_build + +# Now the optimized build: +InstallPython optimized \ + %{py_INSTSONAME_optimized} + +install -d -m 0755 ${RPM_BUILD_ROOT}%{pylibdir}/site-packages/__pycache__ + +%if 0%{main_python3} +#TODO: use 2to3-3 in Fedora as well instead of python3-2to3 +mv ${RPM_BUILD_ROOT}%{_bindir}/2to3 ${RPM_BUILD_ROOT}%{_bindir}/2to3-3 +%endif + +# Development tools +install -m755 -d ${RPM_BUILD_ROOT}%{pylibdir}/Tools +install Tools/README ${RPM_BUILD_ROOT}%{pylibdir}/Tools/ +cp -ar Tools/freeze ${RPM_BUILD_ROOT}%{pylibdir}/Tools/ +cp -ar Tools/i18n ${RPM_BUILD_ROOT}%{pylibdir}/Tools/ +cp -ar Tools/pynche ${RPM_BUILD_ROOT}%{pylibdir}/Tools/ +cp -ar Tools/scripts ${RPM_BUILD_ROOT}%{pylibdir}/Tools/ + +# Documentation tools +install -m755 -d %{buildroot}%{pylibdir}/Doc +cp -ar Doc/tools %{buildroot}%{pylibdir}/Doc/ + +# Demo scripts +cp -ar Tools/demo %{buildroot}%{pylibdir}/Tools/ + +# Fix for bug #136654 +rm -f %{buildroot}%{pylibdir}/email/test/data/audiotest.au %{buildroot}%{pylibdir}/test/audiotest.au + +%if "%{_lib}" == "lib64" +install -d -m 0755 %{buildroot}/usr/lib/python%{pybasever}/site-packages/__pycache__ +%endif + +# Make python3-devel multilib-ready (bug #192747, #139911) +%global _pyconfig32_h pyconfig-32.h +%global _pyconfig64_h pyconfig-64.h + +%ifarch %{power64} s390x x86_64 ia64 alpha sparc64 aarch64 +%global _pyconfig_h %{_pyconfig64_h} +%else +%global _pyconfig_h %{_pyconfig32_h} +%endif + +# ABIFLAGS, LDVERSION and SOABI are in the upstream Makefile +%global ABIFLAGS_optimized m +%global ABIFLAGS_debug dm + +%global LDVERSION_optimized %{pybasever}%{ABIFLAGS_optimized} +%global LDVERSION_debug %{pybasever}%{ABIFLAGS_debug} + +%global SOABI_optimized cpython-%{pyshortver}%{ABIFLAGS_optimized} +%global SOABI_debug cpython-%{pyshortver}%{ABIFLAGS_debug} + +%if 0%{?with_debug_build} +%global PyIncludeDirs python%{LDVERSION_optimized} python%{LDVERSION_debug} + +%else +%global PyIncludeDirs python%{LDVERSION_optimized} +%endif + +for PyIncludeDir in %{PyIncludeDirs} ; do + mv %{buildroot}%{_includedir}/$PyIncludeDir/pyconfig.h \ + %{buildroot}%{_includedir}/$PyIncludeDir/%{_pyconfig_h} + cat > %{buildroot}%{_includedir}/$PyIncludeDir/pyconfig.h << EOF +#include <bits/wordsize.h> + +#if __WORDSIZE == 32 +#include "%{_pyconfig32_h}" +#elif __WORDSIZE == 64 +#include "%{_pyconfig64_h}" +#else +#error "Unknown word size" +#endif +EOF +done + +# Fix for bug 201434: make sure distutils looks at the right pyconfig.h file +# Similar for sysconfig: sysconfig.get_config_h_filename tries to locate +# pyconfig.h so it can be parsed, and needs to do this at runtime in site.py +# when python starts up (bug 653058) +# +# Split this out so it goes directly to the pyconfig-32.h/pyconfig-64.h +# variants: +sed -i -e "s/'pyconfig.h'/'%{_pyconfig_h}'/" \ + %{buildroot}%{pylibdir}/distutils/sysconfig.py \ + %{buildroot}%{pylibdir}/sysconfig.py + +# Switch all shebangs to refer to the specific Python version. +LD_LIBRARY_PATH=./build/optimized ./build/optimized/python \ + Tools/scripts/pathfix.py \ + -i "%{_bindir}/python%{pybasever}" \ + %{buildroot} + +# Remove shebang lines from .py files that aren't executable, and +# remove executability from .py files that don't have a shebang line: +find %{buildroot} -name \*.py \ + \( \( \! -perm /u+x,g+x,o+x -exec sed -e '/^#!/Q 0' -e 'Q 1' {} \; \ + -print -exec sed -i '1d' {} \; \) -o \( \ + -perm /u+x,g+x,o+x ! -exec grep -m 1 -q '^#!' {} \; \ + -exec chmod a-x {} \; \) \) + +# .xpm and .xbm files should not be executable: +find %{buildroot} \ + \( -name \*.xbm -o -name \*.xpm -o -name \*.xpm.1 \) \ + -exec chmod a-x {} \; + +# Remove executable flag from files that shouldn't have it: +chmod a-x \ + %{buildroot}%{pylibdir}/distutils/tests/Setup.sample \ + %{buildroot}%{pylibdir}/Tools/README + +# Get rid of DOS batch files: +find %{buildroot} -name \*.bat -exec rm {} \; + +# Get rid of backup files: +find %{buildroot}/ -name "*~" -exec rm -f {} \; +find . -name "*~" -exec rm -f {} \; +rm -f %{buildroot}%{pylibdir}/LICENSE.txt +# Junk, no point in putting in -test sub-pkg +rm -f ${RPM_BUILD_ROOT}/%{pylibdir}/idlelib/testcode.py* + +# Get rid of stray patch file from buildroot: +rm -f %{buildroot}%{pylibdir}/test/test_imp.py.apply-our-changes-to-expected-shebang # from patch 4 + +# Fix end-of-line encodings: +find %{buildroot}/ -name \*.py -exec sed -i 's/\r//' {} \; + +# Fix an encoding: +iconv -f iso8859-1 -t utf-8 %{buildroot}/%{pylibdir}/Demo/rpc/README > README.conv && mv -f README.conv %{buildroot}/%{pylibdir}/Demo/rpc/README + +# Note that +# %{pylibdir}/Demo/distutils/test2to3/setup.py +# is in iso-8859-1 encoding, and that this is deliberate; this is test data +# for the 2to3 tool, and one of the functions of the 2to3 tool is to fixup +# character encodings within python source code + +# Do bytecompilation with the newly installed interpreter. +# This is similar to the script in macros.pybytecompile +# compile *.pyo +find %{buildroot} -type f -a -name "*.py" -print0 | \ + LD_LIBRARY_PATH="%{buildroot}%{dynload_dir}/:%{buildroot}%{_libdir}" \ + PYTHONPATH="%{buildroot}%{_libdir}/python%{pybasever} %{buildroot}%{_libdir}/python%{pybasever}/site-packages" \ + xargs -0 %{buildroot}%{_bindir}/python%{pybasever} -O -c 'import py_compile, sys; [py_compile.compile(f, dfile=f.partition("%{buildroot}")[2]) for f in sys.argv[1:]]' || : +# compile *.pyc +find %{buildroot} -type f -a -name "*.py" -print0 | \ + LD_LIBRARY_PATH="%{buildroot}%{dynload_dir}/:%{buildroot}%{_libdir}" \ + PYTHONPATH="%{buildroot}%{_libdir}/python%{pybasever} %{buildroot}%{_libdir}/python%{pybasever}/site-packages" \ + xargs -0 %{buildroot}%{_bindir}/python%{pybasever} -O -c 'import py_compile, sys; [py_compile.compile(f, dfile=f.partition("%{buildroot}")[2], optimize=0) for f in sys.argv[1:]]' || : + +# Fixup permissions for shared libraries from non-standard 555 to standard 755: +find %{buildroot} \ + -perm 555 -exec chmod 755 {} \; + +# Install macros for rpm: +mkdir -p %{buildroot}/%{_rpmconfigdir}/macros.d/ +install -m 644 %{SOURCE2} %{buildroot}/%{_rpmconfigdir}/macros.d/ +install -m 644 %{SOURCE3} %{buildroot}/%{_rpmconfigdir}/macros.d/ + +# Ensure that the curses module was linked against libncursesw.so, rather than +# libncurses.so (bug 539917) +ldd %{buildroot}/%{dynload_dir}/_curses*.so \ + | grep curses \ + | grep libncurses.so && (echo "_curses.so linked against libncurses.so" ; exit 1) + +# Ensure that the debug modules are linked against the debug libpython, and +# likewise for the optimized modules and libpython: +for Module in %{buildroot}/%{dynload_dir}/*.so ; do + case $Module in + *.%{SOABI_debug}) + ldd $Module | grep %{py_INSTSONAME_optimized} && + (echo Debug module $Module linked against optimized %{py_INSTSONAME_optimized} ; exit 1) + + ;; + *.%{SOABI_optimized}) + ldd $Module | grep %{py_INSTSONAME_debug} && + (echo Optimized module $Module linked against debug %{py_INSTSONAME_debug} ; exit 1) + ;; + esac +done + +# Create "/usr/bin/python3-debug", a symlink to the python3 debug binary, to +# avoid the user having to know the precise version and ABI flags. (see +# e.g. rhbz#676748): +%if 0%{?with_debug_build} +ln -s \ + %{_bindir}/python%{LDVERSION_debug} \ + %{buildroot}%{_bindir}/python%{pybasever}-debug + +%if 0%{main_python3} +ln -s \ + %{_bindir}/python%{pybasever}-debug \ + %{buildroot}%{_bindir}/python3-debug +%endif +%endif + +# +# Systemtap hooks: +# +%if 0%{?with_systemtap} +# Install a tapset for this libpython into tapsetdir, fixing up the path to the +# library: +mkdir -p %{buildroot}%{tapsetdir} +%ifarch %{power64} s390x x86_64 ia64 alpha sparc64 aarch64 +%global libpython_stp_optimized libpython%{pybasever}-64.stp +%global libpython_stp_debug libpython%{pybasever}-debug-64.stp +%else +%global libpython_stp_optimized libpython%{pybasever}-32.stp +%global libpython_stp_debug libpython%{pybasever}-debug-32.stp +%endif + +sed \ + -e "s|LIBRARY_PATH|%{_libdir}/%{py_INSTSONAME_optimized}|" \ + %{_sourcedir}/libpython.stp \ + > %{buildroot}%{tapsetdir}/%{libpython_stp_optimized} + +%if 0%{?with_debug_build} +# In Python 3, python3 and python3-debug don't point to the same binary, +# so we have to replace "python3" with "python3-debug" to get systemtap +# working with debug build +sed \ + -e "s|LIBRARY_PATH|%{_libdir}/%{py_INSTSONAME_debug}|" \ + -e 's|"python3"|"python%{pybasever}-debug"|' \ + %{_sourcedir}/libpython.stp \ + > %{buildroot}%{tapsetdir}/%{libpython_stp_debug} +%endif # with_debug_build + +%endif # with_systemtap + +# Rename the script that differs on different arches to arch specific name +mv %{buildroot}%{_bindir}/python%{LDVERSION_optimized}-{,`uname -m`-}config +echo -e '#!/bin/sh\nexec `dirname $0`/python%{LDVERSION_optimized}-`uname -m`-config "$@"' > \ + %{buildroot}%{_bindir}/python%{LDVERSION_optimized}-config +echo '[ $? -eq 127 ] && echo "Could not find python%{LDVERSION_optimized}-`uname -m`-config. Look around to see available arches." >&2' >> \ + %{buildroot}%{_bindir}/python%{LDVERSION_optimized}-config + chmod +x %{buildroot}%{_bindir}/python%{LDVERSION_optimized}-config + +%if ! 0%{?main_python3} +# make altinstall doesn't create python3.X-config, but we want it +# (we don't want to have just python3.Xm-config, that's a bit confusing) +ln -s \ + %{_bindir}/python%{LDVERSION_optimized}-config \ + %{buildroot}%{_bindir}/python%{pybasever}-config +# make altinstall doesn't create python-3.4m.pc, only python-3.4.pc, but we want both +ln -s \ + %{_libdir}/pkgconfig/python-%{pybasever}.pc \ + %{buildroot}%{_libdir}/pkgconfig/python-%{LDVERSION_optimized}.pc +%endif + +# remove libpython3.so in EPEL non-main python to not cause collision +# between python3X and python3X+1 stacks... +%if ! 0%{?main_python3} +rm -f %{buildroot}%{_libdir}/libpython3.so +%endif + +# ====================================================== +# Running the upstream test suite +# ====================================================== + +%check + +# first of all, check timestamps of bytecode files +find %{buildroot} -type f -a -name "*.py" -print0 | \ + LD_LIBRARY_PATH="%{buildroot}%{dynload_dir}/:%{buildroot}%{_libdir}" \ + PYTHONPATH="%{buildroot}%{_libdir}/python%{pybasever} %{buildroot}%{_libdir}/python%{pybasever}/site-packages" \ + xargs -0 %{buildroot}%{_bindir}/python%{pybasever} %{SOURCE8} + + +topdir=$(pwd) +CheckPython() { + ConfName=$1 + ConfDir=$(pwd)/build/$ConfName + + echo STARTING: CHECKING OF PYTHON FOR CONFIGURATION: $ConfName + + # Note that we're running the tests using the version of the code in the + # builddir, not in the buildroot. + + # Run the upstream test suite, setting "WITHIN_PYTHON_RPM_BUILD" so that the + # our non-standard decorators take effect on the relevant tests: + # @unittest._skipInRpmBuild(reason) + # @unittest._expectedFailureInRpmBuild + # test_faulthandler.test_register_chain currently fails on ppc64le and + # aarch64, see upstream bug http://bugs.python.org/issue21131 + WITHIN_PYTHON_RPM_BUILD= \ + LD_LIBRARY_PATH=$ConfDir $ConfDir/python -m test.regrtest \ + --verbose --findleaks \ + -x test_distutils \ + %if 0%{!with_rewheel} + -x test_ensurepip \ + -x test_venv \ + %endif + %ifarch ppc64le aarch64 + -x test_faulthandler \ + %endif + %ifarch %{power64} s390 s390x + -x test_gdb + %endif + + echo FINISHED: CHECKING OF PYTHON FOR CONFIGURATION: $ConfName + +} + +%if 0%{run_selftest_suite} + +# Check each of the configurations: +%if 0%{?with_debug_build} +CheckPython debug +%endif # with_debug_build +CheckPython optimized + +%endif # run_selftest_suite + + +# ====================================================== +# Cleaning up +# ====================================================== + +%clean +rm -fr %{buildroot} + + +# ====================================================== +# Scriptlets +# ====================================================== + +%post libs -p /sbin/ldconfig + +%postun libs -p /sbin/ldconfig + + + +%files +%defattr(-, root, root) +%doc LICENSE README +%{_bindir}/pydoc* +%if 0%{?main_python3} +%{_bindir}/python3 +%endif +%{_bindir}/python%{pybasever} +%{_bindir}/python%{pybasever}m +%if 0%{?main_python3} +%{_bindir}/pyvenv +%endif +%{_bindir}/pyvenv-%{pybasever} +%{_mandir}/*/* + +%files libs +%defattr(-,root,root,-) +%doc LICENSE README +%dir %{pylibdir} +%dir %{dynload_dir} +%{dynload_dir}/_bisect.%{SOABI_optimized}.so +%{dynload_dir}/_bz2.%{SOABI_optimized}.so +%{dynload_dir}/_codecs_cn.%{SOABI_optimized}.so +%{dynload_dir}/_codecs_hk.%{SOABI_optimized}.so +%{dynload_dir}/_codecs_iso2022.%{SOABI_optimized}.so +%{dynload_dir}/_codecs_jp.%{SOABI_optimized}.so +%{dynload_dir}/_codecs_kr.%{SOABI_optimized}.so +%{dynload_dir}/_codecs_tw.%{SOABI_optimized}.so +%{dynload_dir}/_crypt.%{SOABI_optimized}.so +%{dynload_dir}/_csv.%{SOABI_optimized}.so +%{dynload_dir}/_ctypes.%{SOABI_optimized}.so +%{dynload_dir}/_curses.%{SOABI_optimized}.so +%{dynload_dir}/_curses_panel.%{SOABI_optimized}.so +%{dynload_dir}/_dbm.%{SOABI_optimized}.so +%{dynload_dir}/_decimal.%{SOABI_optimized}.so +%{dynload_dir}/_elementtree.%{SOABI_optimized}.so +%if %{with_gdbm} +%{dynload_dir}/_gdbm.%{SOABI_optimized}.so +%endif +%{dynload_dir}/_hashlib.%{SOABI_optimized}.so +%{dynload_dir}/_heapq.%{SOABI_optimized}.so +%{dynload_dir}/_json.%{SOABI_optimized}.so +%{dynload_dir}/_lsprof.%{SOABI_optimized}.so +%{dynload_dir}/_lzma.%{SOABI_optimized}.so +%{dynload_dir}/_multibytecodec.%{SOABI_optimized}.so +%{dynload_dir}/_multiprocessing.%{SOABI_optimized}.so +%{dynload_dir}/_opcode.%{SOABI_optimized}.so +%{dynload_dir}/_pickle.%{SOABI_optimized}.so +%{dynload_dir}/_posixsubprocess.%{SOABI_optimized}.so +%{dynload_dir}/_random.%{SOABI_optimized}.so +%{dynload_dir}/_socket.%{SOABI_optimized}.so +%{dynload_dir}/_sqlite3.%{SOABI_optimized}.so +%{dynload_dir}/_ssl.%{SOABI_optimized}.so +%{dynload_dir}/_struct.%{SOABI_optimized}.so +%{dynload_dir}/array.%{SOABI_optimized}.so +%{dynload_dir}/audioop.%{SOABI_optimized}.so +%{dynload_dir}/binascii.%{SOABI_optimized}.so +%{dynload_dir}/cmath.%{SOABI_optimized}.so +%{dynload_dir}/_datetime.%{SOABI_optimized}.so +%{dynload_dir}/fcntl.%{SOABI_optimized}.so +%{dynload_dir}/grp.%{SOABI_optimized}.so +%{dynload_dir}/math.%{SOABI_optimized}.so +%{dynload_dir}/mmap.%{SOABI_optimized}.so +%{dynload_dir}/nis.%{SOABI_optimized}.so +%{dynload_dir}/ossaudiodev.%{SOABI_optimized}.so +%{dynload_dir}/parser.%{SOABI_optimized}.so +%{dynload_dir}/pyexpat.%{SOABI_optimized}.so +%{dynload_dir}/readline.%{SOABI_optimized}.so +%{dynload_dir}/resource.%{SOABI_optimized}.so +%{dynload_dir}/select.%{SOABI_optimized}.so +%{dynload_dir}/spwd.%{SOABI_optimized}.so +%{dynload_dir}/syslog.%{SOABI_optimized}.so +%{dynload_dir}/termios.%{SOABI_optimized}.so +%{dynload_dir}/time.%{SOABI_optimized}.so +%{dynload_dir}/unicodedata.%{SOABI_optimized}.so +%{dynload_dir}/xxlimited.%{SOABI_optimized}.so +%{dynload_dir}/zlib.%{SOABI_optimized}.so + +%dir %{pylibdir}/site-packages/ +%dir %{pylibdir}/site-packages/__pycache__/ +%{pylibdir}/site-packages/README +%{pylibdir}/*.py +%dir %{pylibdir}/__pycache__/ +%{pylibdir}/__pycache__/*%{bytecode_suffixes} + +%dir %{pylibdir}/asyncio/ +%dir %{pylibdir}/asyncio/__pycache__/ +%{pylibdir}/asyncio/*.py +%{pylibdir}/asyncio/__pycache__/*%{bytecode_suffixes} + +%dir %{pylibdir}/collections/ +%dir %{pylibdir}/collections/__pycache__/ +%{pylibdir}/collections/*.py +%{pylibdir}/collections/__pycache__/*%{bytecode_suffixes} + +%dir %{pylibdir}/concurrent/ +%dir %{pylibdir}/concurrent/__pycache__/ +%{pylibdir}/concurrent/*.py +%{pylibdir}/concurrent/__pycache__/*%{bytecode_suffixes} + +%dir %{pylibdir}/concurrent/futures/ +%dir %{pylibdir}/concurrent/futures/__pycache__/ +%{pylibdir}/concurrent/futures/*.py +%{pylibdir}/concurrent/futures/__pycache__/*%{bytecode_suffixes} + +%dir %{pylibdir}/ctypes/ +%dir %{pylibdir}/ctypes/__pycache__/ +%{pylibdir}/ctypes/*.py +%{pylibdir}/ctypes/__pycache__/*%{bytecode_suffixes} +%{pylibdir}/ctypes/macholib + +%{pylibdir}/curses + +%dir %{pylibdir}/dbm/ +%dir %{pylibdir}/dbm/__pycache__/ +%{pylibdir}/dbm/*.py +%{pylibdir}/dbm/__pycache__/*%{bytecode_suffixes} + +%dir %{pylibdir}/distutils/ +%dir %{pylibdir}/distutils/__pycache__/ +%{pylibdir}/distutils/*.py +%{pylibdir}/distutils/__pycache__/*%{bytecode_suffixes} +%{pylibdir}/distutils/README +%{pylibdir}/distutils/command + +%dir %{pylibdir}/email/ +%dir %{pylibdir}/email/__pycache__/ +%{pylibdir}/email/*.py +%{pylibdir}/email/__pycache__/*%{bytecode_suffixes} +%{pylibdir}/email/mime +%doc %{pylibdir}/email/architecture.rst + +%{pylibdir}/encodings + +%dir %{pylibdir}/ensurepip/ +%dir %{pylibdir}/ensurepip/__pycache__/ +%{pylibdir}/ensurepip/*.py +%{pylibdir}/ensurepip/__pycache__/*%{bytecode_suffixes} +%exclude %{pylibdir}/ensurepip/_bundled + +%if 0%{?with_rewheel} +%dir %{pylibdir}/ensurepip/rewheel/ +%dir %{pylibdir}/ensurepip/rewheel/__pycache__/ +%{pylibdir}/ensurepip/rewheel/*.py +%{pylibdir}/ensurepip/rewheel/__pycache__/*%{bytecode_suffixes} +%endif + +%{pylibdir}/html +%{pylibdir}/http +%{pylibdir}/idlelib + +%dir %{pylibdir}/importlib/ +%dir %{pylibdir}/importlib/__pycache__/ +%{pylibdir}/importlib/*.py +%{pylibdir}/importlib/__pycache__/*%{bytecode_suffixes} + +%dir %{pylibdir}/json/ +%dir %{pylibdir}/json/__pycache__/ +%{pylibdir}/json/*.py +%{pylibdir}/json/__pycache__/*%{bytecode_suffixes} + +%{pylibdir}/lib2to3 +%exclude %{pylibdir}/lib2to3/tests +%{pylibdir}/logging +%{pylibdir}/multiprocessing +%{pylibdir}/plat-linux +%{pylibdir}/pydoc_data + +%dir %{pylibdir}/sqlite3/ +%dir %{pylibdir}/sqlite3/__pycache__/ +%{pylibdir}/sqlite3/*.py +%{pylibdir}/sqlite3/__pycache__/*%{bytecode_suffixes} + +%dir %{pylibdir}/test/ +%dir %{pylibdir}/test/__pycache__/ +%dir %{pylibdir}/test/support/ +%dir %{pylibdir}/test/support/__pycache__/ +%{pylibdir}/test/__init__.py +%{pylibdir}/test/__pycache__/__init__%{bytecode_suffixes} +%{pylibdir}/test/support/__init__.py +%{pylibdir}/test/support/__pycache__/__init__%{bytecode_suffixes} + +%exclude %{pylibdir}/turtle.py +%exclude %{pylibdir}/__pycache__/turtle*%{bytecode_suffixes} + +%dir %{pylibdir}/unittest/ +%dir %{pylibdir}/unittest/__pycache__/ +%{pylibdir}/unittest/*.py +%{pylibdir}/unittest/__pycache__/*%{bytecode_suffixes} + +%{pylibdir}/urllib + +%dir %{pylibdir}/venv/ +%dir %{pylibdir}/venv/__pycache__/ +%{pylibdir}/venv/*.py +%{pylibdir}/venv/__pycache__/*%{bytecode_suffixes} +%{pylibdir}/venv/scripts + +%{pylibdir}/wsgiref +%{pylibdir}/xml +%{pylibdir}/xmlrpc + +%if "%{_lib}" == "lib64" +%attr(0755,root,root) %dir %{_prefix}/lib/python%{pybasever} +%attr(0755,root,root) %dir %{_prefix}/lib/python%{pybasever}/site-packages +%attr(0755,root,root) %dir %{_prefix}/lib/python%{pybasever}/site-packages/__pycache__/ +%endif + +# "Makefile" and the config-32/64.h file are needed by +# distutils/sysconfig.py:_init_posix(), so we include them in the core +# package, along with their parent directories (bug 531901): +%dir %{pylibdir}/config-%{LDVERSION_optimized}/ +%{pylibdir}/config-%{LDVERSION_optimized}/Makefile +%dir %{_includedir}/python%{LDVERSION_optimized}/ +%{_includedir}/python%{LDVERSION_optimized}/%{_pyconfig_h} + +%{_libdir}/%{py_INSTSONAME_optimized} +# removed in EPEL, see explanation in install section +%if 0%{?main_python3} +%{_libdir}/libpython3.so +%endif +%if 0%{?with_systemtap} +%dir %(dirname %{tapsetdir}) +%dir %{tapsetdir} +%{tapsetdir}/%{libpython_stp_optimized} +%doc systemtap-example.stp pyfuntop.stp +%endif + +%files devel +%defattr(-,root,root) +%{pylibdir}/config-%{LDVERSION_optimized}/* +%exclude %{pylibdir}/config-%{LDVERSION_optimized}/Makefile +%{_includedir}/python%{LDVERSION_optimized}/*.h +%exclude %{_includedir}/python%{LDVERSION_optimized}/%{_pyconfig_h} +%doc Misc/README.valgrind Misc/valgrind-python.supp Misc/gdbinit +%if 0%{?main_python3} +%{_bindir}/python3-config +%endif +%{_bindir}/python%{pybasever}-config +%{_bindir}/python%{LDVERSION_optimized}-config +%{_bindir}/python%{LDVERSION_optimized}-*-config +%{_libdir}/libpython%{LDVERSION_optimized}.so +%{_libdir}/pkgconfig/python-%{LDVERSION_optimized}.pc +%{_libdir}/pkgconfig/python-%{pybasever}.pc +%if 0%{?main_python3} +%{_libdir}/pkgconfig/python3.pc +%endif +%{_rpmconfigdir}/macros.d/macros.python%{pybasever} +%{_rpmconfigdir}/macros.d/macros.pybytecompile%{pybasever} + +%files tools +%defattr(-,root,root,755) +%if 0%{?main_python3} +%{_bindir}/2to3-3 +%endif +%{_bindir}/2to3-%{pybasever} +%{_bindir}/idle* +%{pylibdir}/Tools +%doc %{pylibdir}/Doc + +%files tkinter +%defattr(-,root,root,755) +%{pylibdir}/tkinter +%exclude %{pylibdir}/tkinter/test +%{dynload_dir}/_tkinter.%{SOABI_optimized}.so +%{pylibdir}/turtle.py +%{pylibdir}/__pycache__/turtle*%{bytecode_suffixes} +%dir %{pylibdir}/turtledemo +%{pylibdir}/turtledemo/*.py +%{pylibdir}/turtledemo/*.cfg +%dir %{pylibdir}/turtledemo/__pycache__/ +%{pylibdir}/turtledemo/__pycache__/*%{bytecode_suffixes} + +%files test +%defattr(-, root, root) +%{pylibdir}/ctypes/test +%{pylibdir}/distutils/tests +%{pylibdir}/sqlite3/test +%{pylibdir}/test +%{dynload_dir}/_ctypes_test.%{SOABI_optimized}.so +%{dynload_dir}/_testbuffer.%{SOABI_optimized}.so +%{dynload_dir}/_testcapi.%{SOABI_optimized}.so +%{dynload_dir}/_testimportmultiple.%{SOABI_optimized}.so +%{pylibdir}/lib2to3/tests +%{pylibdir}/tkinter/test +%{pylibdir}/unittest/test + + +# We don't bother splitting the debug build out into further subpackages: +# if you need it, you're probably a developer. + +# Hence the manifest is the combination of analogous files in the manifests of +# all of the other subpackages + +%if 0%{?with_debug_build} +%files debug +%defattr(-,root,root,-) + +# Analog of the core subpackage's files: +%{_bindir}/python%{LDVERSION_debug} +%if 0%{?main_python3} +%{_bindir}/python3-debug +%endif +%{_bindir}/python%{pybasever}-debug + +# Analog of the -libs subpackage's files: +# ...with debug builds of the built-in "extension" modules: +%{dynload_dir}/_bisect.%{SOABI_debug}.so +%{dynload_dir}/_bz2.%{SOABI_debug}.so +%{dynload_dir}/_codecs_cn.%{SOABI_debug}.so +%{dynload_dir}/_codecs_hk.%{SOABI_debug}.so +%{dynload_dir}/_codecs_iso2022.%{SOABI_debug}.so +%{dynload_dir}/_codecs_jp.%{SOABI_debug}.so +%{dynload_dir}/_codecs_kr.%{SOABI_debug}.so +%{dynload_dir}/_codecs_tw.%{SOABI_debug}.so +%{dynload_dir}/_crypt.%{SOABI_debug}.so +%{dynload_dir}/_csv.%{SOABI_debug}.so +%{dynload_dir}/_ctypes.%{SOABI_debug}.so +%{dynload_dir}/_curses.%{SOABI_debug}.so +%{dynload_dir}/_curses_panel.%{SOABI_debug}.so +%{dynload_dir}/_dbm.%{SOABI_debug}.so +%{dynload_dir}/_decimal.%{SOABI_debug}.so +%{dynload_dir}/_elementtree.%{SOABI_debug}.so +%if %{with_gdbm} +%{dynload_dir}/_gdbm.%{SOABI_debug}.so +%endif +%{dynload_dir}/_hashlib.%{SOABI_debug}.so +%{dynload_dir}/_heapq.%{SOABI_debug}.so +%{dynload_dir}/_json.%{SOABI_debug}.so +%{dynload_dir}/_lsprof.%{SOABI_debug}.so +%{dynload_dir}/_lzma.%{SOABI_debug}.so +%{dynload_dir}/_multibytecodec.%{SOABI_debug}.so +%{dynload_dir}/_multiprocessing.%{SOABI_debug}.so +%{dynload_dir}/_opcode.%{SOABI_debug}.so +%{dynload_dir}/_pickle.%{SOABI_debug}.so +%{dynload_dir}/_posixsubprocess.%{SOABI_debug}.so +%{dynload_dir}/_random.%{SOABI_debug}.so +%{dynload_dir}/_socket.%{SOABI_debug}.so +%{dynload_dir}/_sqlite3.%{SOABI_debug}.so +%{dynload_dir}/_ssl.%{SOABI_debug}.so +%{dynload_dir}/_struct.%{SOABI_debug}.so +%{dynload_dir}/array.%{SOABI_debug}.so +%{dynload_dir}/audioop.%{SOABI_debug}.so +%{dynload_dir}/binascii.%{SOABI_debug}.so +%{dynload_dir}/cmath.%{SOABI_debug}.so +%{dynload_dir}/_datetime.%{SOABI_debug}.so +%{dynload_dir}/fcntl.%{SOABI_debug}.so +%{dynload_dir}/grp.%{SOABI_debug}.so +%{dynload_dir}/math.%{SOABI_debug}.so +%{dynload_dir}/mmap.%{SOABI_debug}.so +%{dynload_dir}/nis.%{SOABI_debug}.so +%{dynload_dir}/ossaudiodev.%{SOABI_debug}.so +%{dynload_dir}/parser.%{SOABI_debug}.so +%{dynload_dir}/pyexpat.%{SOABI_debug}.so +%{dynload_dir}/readline.%{SOABI_debug}.so +%{dynload_dir}/resource.%{SOABI_debug}.so +%{dynload_dir}/select.%{SOABI_debug}.so +%{dynload_dir}/spwd.%{SOABI_debug}.so +%{dynload_dir}/syslog.%{SOABI_debug}.so +%{dynload_dir}/termios.%{SOABI_debug}.so +%{dynload_dir}/time.%{SOABI_debug}.so +%{dynload_dir}/unicodedata.%{SOABI_debug}.so +%{dynload_dir}/zlib.%{SOABI_debug}.so + +# No need to split things out the "Makefile" and the config-32/64.h file as we +# do for the regular build above (bug 531901), since they're all in one package +# now; they're listed below, under "-devel": + +%{_libdir}/%{py_INSTSONAME_debug} +%if 0%{?with_systemtap} +%dir %(dirname %{tapsetdir}) +%dir %{tapsetdir} +%{tapsetdir}/%{libpython_stp_debug} +%endif + +# Analog of the -devel subpackage's files: +%{pylibdir}/config-%{LDVERSION_debug} +%{_includedir}/python%{LDVERSION_debug} +%{_bindir}/python%{LDVERSION_debug}-config +%{_libdir}/libpython%{LDVERSION_debug}.so +%{_libdir}/pkgconfig/python-%{LDVERSION_debug}.pc + +# Analog of the -tools subpackage's files: +# None for now; we could build precanned versions that have the appropriate +# shebang if needed + +# Analog of the tkinter subpackage's files: +%{dynload_dir}/_tkinter.%{SOABI_debug}.so + +# Analog of the -test subpackage's files: +%{dynload_dir}/_ctypes_test.%{SOABI_debug}.so +%{dynload_dir}/_testbuffer.%{SOABI_debug}.so +%{dynload_dir}/_testcapi.%{SOABI_debug}.so +%{dynload_dir}/_testimportmultiple.%{SOABI_debug}.so + +%endif # with_debug_build + +# We put the debug-gdb.py file inside /usr/lib/debug to avoid noise from +# ldconfig (rhbz:562980). +# +# The /usr/lib/rpm/redhat/macros defines %__debug_package to use +# debugfiles.list, and it appears that everything below /usr/lib/debug and +# (/usr/src/debug) gets added to this file (via LISTFILES) in +# /usr/lib/rpm/find-debuginfo.sh +# +# Hence by installing it below /usr/lib/debug we ensure it is added to the +# -debuginfo subpackage +# (if it doesn't, then the rpmbuild ought to fail since the debug-gdb.py +# payload file would be unpackaged) + + +# ====================================================== +# Finally, the changelog: +# ====================================================== + +%changelog +* Thu Jun 11 2015 Matej Stuchlik <mstuchli@redhat.com> - 3.4.3-2 +- Review Request fixes + +* Thu Jun 11 2015 Matej Stuchlik <mstuchli@redhat.com> - 3.4.3-1 +- Update to 3.4.3 + +* Thu Feb 26 2015 Slavek Kabrda <bkabrda@redhat.com> - 3.4.2-9 +- Remove libpython3.so + +* Wed Feb 25 2015 Slavek Kabrda <bkabrda@redhat.com> - 3.4.2-8 +- Determine value of main_python3 macro based on python3_pkgversion + from python3-pkgversion-macros package +- Comment out patch 199 which made tests fail +- __python3 macro now points to full versioned binary, e.g. /usr/bin/python3.4, + this makes sure that autogenerated RPM requires for for dependent packages + always point to this package even if it's not the "main_python3" + +* Tue Feb 24 2015 Slavek Kabrda <bkabrda@redhat.com> - 3.4.2-7 +- Rebuilt as python34 for EPEL 7 + +* Sat Feb 21 2015 Till Maas <opensource@till.name> - 3.4.2-6 +- Rebuilt for Fedora 23 Change + https://fedoraproject.org/wiki/Changes/Harden_all_packages_with_position-independent_code + +* Tue Feb 17 2015 Ville Skyttä <ville.skytta@iki.fi> - 3.4.2-5 +- Own systemtap dirs (#710733) + +* Mon Jan 12 2015 Dan Horák <dan[at]danny.cz> - 3.4.2-4 +- build with valgrind on ppc64le +- disable test_gdb on s390(x) until rhbz#1181034 is resolved + +* Tue Dec 16 2014 Robert Kuska <rkuska@redhat.com> - 3.4.2-3 +- New patches: 170 (gc asserts), 200 (gettext headers), + 201 (gdbm memory leak) + +* Thu Dec 11 2014 Robert Kuska <rkuska@redhat.com> - 3.4.2-2 +- OpenSSL disabled SSLv3 in SSLv23 method + +* Thu Nov 13 2014 Matej Stuchlik <mstuchli@redhat.com> - 3.4.2-1 +- Update to 3.4.2 +- Refreshed patches: 156 (gdb autoload) +- Removed: 195 (Werror declaration), 197 (CVE-2014-4650) + +* Mon Nov 03 2014 Slavek Kabrda <bkabrda@redhat.com> - 3.4.1-16 +- Fix CVE-2014-4650 - CGIHTTPServer URL handling +Resolves: rhbz#1113529 + +* Sun Sep 07 2014 Karsten Hopp <karsten@redhat.com> 3.4.1-15 +- exclude test_gdb on ppc* (rhbz#1132488) + +* Thu Aug 21 2014 Slavek Kabrda <bkabrda@redhat.com> - 3.4.1-14 +- Update rewheel patch with fix from https://github.com/bkabrda/rewheel/pull/1 + +* Sun Aug 17 2014 Fedora Release Engineering <rel-eng@lists.fedoraproject.org> - 3.4.1-13 +- Rebuilt for https://fedoraproject.org/wiki/Fedora_21_22_Mass_Rebuild + +* Sun Jun 8 2014 Peter Robinson <pbrobinson@fedoraproject.org> 3.4.1-12 +- aarch64 has valgrind, just list those that don't support it + +* Sun Jun 08 2014 Fedora Release Engineering <rel-eng@lists.fedoraproject.org> - 3.4.1-11 +- Rebuilt for https://fedoraproject.org/wiki/Fedora_21_Mass_Rebuild + +* Wed Jun 04 2014 Karsten Hopp <karsten@redhat.com> 3.4.1-10 +- bump release and rebuild to link with the correct tcl/tk libs on ppcle + +* Tue Jun 03 2014 Matej Stuchlik <mstuchli@redhat.com> - 3.4.1-9 +- Change paths to bundled projects in rewheel patch + +* Fri May 30 2014 Miro Hrončok <mhroncok@redhat.com> - 3.4.1-8 +- In config script, use uname -m to write the arch + +* Thu May 29 2014 Dan Horák <dan[at]danny.cz> - 3.4.1-7 +- update the arch list where valgrind exists - %%power64 includes also + ppc64le which is not supported yet + +* Thu May 29 2014 Miro Hrončok <mhroncok@redhat.com> - 3.4.1-6 +- Forward arguments to the arch specific config script +Resolves: rhbz#1102683 + +* Wed May 28 2014 Miro Hrončok <mhroncok@redhat.com> - 3.4.1-5 +- Rename python3.Xm-config script to arch specific. +Resolves: rhbz#1091815 + +* Tue May 27 2014 Bohuslav Kabrda <bkabrda@redhat.com> - 3.4.1-4 +- Use python3-*, not python-* runtime requires on setuptools and pip +- rebuild for tcl-8.6 + +* Tue May 27 2014 Matej Stuchlik <mstuchli@redhat.com> - 3.4.1-3 +- Update the rewheel module + +* Mon May 26 2014 Miro Hrončok <mhroncok@redhat.com> - 3.4.1-2 +- Fix multilib dependencies. +Resolves: rhbz#1091815 + +* Sun May 25 2014 Matej Stuchlik <mstuchli@redhat.com> - 3.4.1-1 +- Update to Python 3.4.1 + +* Sun May 25 2014 Matej Stuchlik <mstuchli@redhat.com> - 3.4.0-8 +- Fix test_gdb failure on ppc64le +Resolves: rhbz#1095355 + +* Thu May 22 2014 Miro Hrončok <mhroncok@redhat.com> - 3.4.0-7 +- Add macro %%python3_version_nodots + +* Sun May 18 2014 Matej Stuchlik <mstuchli@redhat.com> - 3.4.0-6 +- Disable test_faulthandler, test_gdb on aarch64 +Resolves: rhbz#1045193 + +* Fri May 16 2014 Matej Stuchlik <mstuchli@redhat.com> - 3.4.0-5 +- Don't add Werror=declaration-after-statement for extension + modules through setup.py (PyBT#21121) + +* Mon May 12 2014 Matej Stuchlik <mstuchli@redhat.com> - 3.4.0-4 +- Add setuptools and pip to Requires + +* Tue Apr 29 2014 Matej Stuchlik <mstuchli@redhat.com> - 3.4.0-3 +- Point __os_install_post to correct brp-* files + +* Tue Apr 15 2014 Matej Stuchlik <mstuchli@redhat.com> - 3.4.0-2 +- Temporarily disable tests requiring SIGHUP (rhbz#1088233) + +* Tue Apr 15 2014 Matej Stuchlik <mstuchli@redhat.com> - 3.4.0-1 +- Update to Python 3.4 final +- Add patch adding the rewheel module +- Merge patches from master + +* Wed Jan 08 2014 Bohuslav Kabrda <bkabrda@redhat.com> - 3.4.0-0.1.b2 +- Update to Python 3.4 beta 2. +- Refreshed patches: 55 (systemtap), 146 (hashlib-fips), 154 (test_gdb noise) +- Dropped patches: 114 (statvfs constants), 177 (platform unicode) + +* Mon Nov 25 2013 Bohuslav Kabrda <bkabrda@redhat.com> - 3.4.0-0.1.b1 +- Update to Python 3.4 beta 1. +- Refreshed patches: 102 (lib64), 111 (no static lib), 125 (less verbose COUNT +ALLOCS), 141 (fix COUNT_ALLOCS in test_module), 146 (hashlib fips), +157 (UID+GID overflows), 173 (ENOPROTOOPT in bind_port) +- Removed patch 00187 (remove pthread atfork; upstreamed) + +* Mon Nov 04 2013 Bohuslav Kabrda <bkabrda@redhat.com> - 3.4.0-0.1.a4 +- Update to Python 3.4 alpha 4. +- Refreshed patches: 55 (systemtap), 102 (lib64), 111 (no static lib), +114 (statvfs flags), 132 (unittest rpmbuild hooks), 134 (fix COUNT_ALLOCS in +test_sys), 143 (tsc on ppc64), 146 (hashlib fips), 153 (test gdb noise), +157 (UID+GID overflows), 173 (ENOPROTOOPT in bind_port), 186 (dont raise +from py_compile) +- Removed patches: 129 (test_subprocess nonreadable dir - no longer fails in +Koji), 142 (the mock issue that caused this is fixed) +- Added patch 187 (remove thread atfork) - will be in next version +- Refreshed script for checking pyc and pyo timestamps with new ignored files. +- The fips patch is disabled for now until upstream makes a final decision +what to do with sha3 implementation for 3.4.0. + +* Wed Oct 30 2013 Bohuslav Kabrda <bkabrda@redhat.com> - 3.3.2-7 +- Bytecompile all *.py files properly during build (rhbz#1023607) + +* Fri Aug 23 2013 Matej Stuchlik <mstuchli@redhat.com> - 3.3.2-6 +- Added fix for CVE-2013-4238 (rhbz#996399) + +* Fri Jul 26 2013 Dennis Gilmore <dennis@ausil.us> - 3.3.2-5 +- fix up indentation in arm patch + +* Fri Jul 26 2013 Dennis Gilmore <dennis@ausil.us> - 3.3.2-4 +- disable a test that fails on arm +- enable valgrind support on arm arches + +* Tue Jul 02 2013 Bohuslav Kabrda <bkabrda@redhat.com> - 3.3.2-3 +- Fix build with libffi containing multilib wrapper for ffi.h (rhbz#979696). + +* Mon May 20 2013 Bohuslav Kabrda <bkabrda@redhat.com> - 3.3.2-2 +- Add patch for CVE-2013-2099 (rhbz#963261). + +* Thu May 16 2013 Bohuslav Kabrda <bkabrda@redhat.com> - 3.3.2-1 +- Updated to Python 3.3.2. +- Refreshed patches: 153 (gdb test noise) +- Dropped patches: 175 (configure -Wformat, fixed upstream), 182 (gdb +test threads) +- Synced patch numbers with python.spec. + +* Thu May 9 2013 David Malcolm <dmalcolm@redhat.com> - 3.3.1-4 +- fix test.test_gdb.PyBtTests.test_threads on ppc64 (patch 181; rhbz#960010) + +* Thu May 02 2013 Bohuslav Kabrda <bkabrda@redhat.com> - 3.3.1-3 +- Add patch that enables building on ppc64p7 (replace the sed, so that +we get consistent with python2 spec and it's more obvious that we're doing it. + +* Wed Apr 24 2013 Bohuslav Kabrda <bkabrda@redhat.com> - 3.3.1-2 +- Add fix for gdb tests failing on arm, rhbz#951802. + +* Tue Apr 09 2013 Bohuslav Kabrda <bkabrda@redhat.com> - 3.3.1-1 +- Updated to Python 3.3.1. +- Refreshed patches: 55 (systemtap), 111 (no static lib), 146 (hashlib fips), +153 (fix test_gdb noise), 157 (uid, gid overflow - fixed upstream, just +keeping few more downstream tests) +- Removed patches: 3 (audiotest.au made it to upstream tarball) +- Removed workaround for http://bugs.python.org/issue14774, discussed in +http://bugs.python.org/issue15298 and fixed in revision 24d52d3060e8. + +* Mon Mar 25 2013 David Malcolm <dmalcolm@redhat.com> - 3.3.0-10 +- fix gcc 4.8 incompatibility (rhbz#927358); regenerate autotool intermediates + +* Mon Mar 25 2013 David Malcolm <dmalcolm@redhat.com> - 3.3.0-9 +- renumber patches to keep them in sync with python.spec + +* Fri Mar 15 2013 Toshio Kuratomi <toshio@fedoraproject.org> - 3.3.0-8 +- Fix error in platform.platform() when non-ascii byte strings are decoded to + unicode (rhbz#922149) + +* Thu Mar 14 2013 Toshio Kuratomi <toshio@fedoraproject.org> - 3.3.0-7 +- Fix up shared library extension (rhbz#889784) + +* Thu Mar 07 2013 Karsten Hopp <karsten@redhat.com> 3.3.0-6 +- add ppc64p7 build target, optimized for Power7 + +* Mon Mar 4 2013 David Malcolm <dmalcolm@redhat.com> - 3.3.0-5 +- add workaround for ENOPROTOOPT seen running selftests in Koji +(rhbz#913732) + +* Mon Mar 4 2013 David Malcolm <dmalcolm@redhat.com> - 3.3.0-4 +- remove config flag from /etc/rpm/macros.{python3|pybytecompile} + +* Mon Feb 11 2013 David Malcolm <dmalcolm@redhat.com> - 3.3.0-3 +- add aarch64 (rhbz#909783) + +* Thu Nov 29 2012 David Malcolm <dmalcolm@redhat.com> - 3.3.0-2 +- add BR on bluez-libs-devel (rhbz#879720) + +* Sat Sep 29 2012 David Malcolm <dmalcolm@redhat.com> - 3.3.0-1 +- 3.3.0rc3 -> 3.3.0; drop alphatag + +* Mon Sep 24 2012 David Malcolm <dmalcolm@redhat.com> - 3.3.0-0.6.rc3 +- 3.3.0rc2 -> 3.3.0rc3 + +* Mon Sep 10 2012 David Malcolm <dmalcolm@redhat.com> - 3.3.0-0.5.rc2 +- 3.3.0rc1 -> 3.3.0rc2; refresh patch 55 + +* Mon Aug 27 2012 David Malcolm <dmalcolm@redhat.com> - 3.3.0-0.4.rc1 +- 3.3.0b2 -> 3.3.0rc1; refresh patches 3, 55 + +* Mon Aug 13 2012 David Malcolm <dmalcolm@redhat.com> - 3.3.0-0.3.b2 +- 3.3b1 -> 3.3b2; drop upstreamed patch 152; refresh patches 3, 102, 111, +134, 153, 160; regenenerate autotools patch; rework systemtap patch to work +correctly when LANG=C (patch 55); importlib.test was moved to +test.test_importlib upstream + +* Mon Aug 13 2012 Karsten Hopp <karsten@redhat.com> 3.3.0-0.2.b1 +- disable some failing checks on PPC* (rhbz#846849) + +* Fri Aug 3 2012 David Malcolm <dmalcolm@redhat.com> - 3.3.0-0.1.b1 +- 3.2 -> 3.3: https://fedoraproject.org/wiki/Features/Python_3.3 +- 3.3.0b1: refresh patches 3, 55, 102, 111, 113, 114, 134, 157; drop upstream +patch 147; regenenerate autotools patch; drop "--with-wide-unicode" from +configure (PEP 393); "plat-linux2" -> "plat-linux" (upstream issue 12326); +"bz2" -> "_bz2" and "crypt" -> "_crypt"; egg-info files are no longer shipped +for stdlib (upstream issues 10645 and 12218); email/test moved to +test/test_email; add /usr/bin/pyvenv[-3.3] and venv module (PEP 405); add +_decimal and _lzma modules; make collections modules explicit in payload again +(upstream issue 11085); add _testbuffer module to tests subpackage (added in +upstream commit 3f9b3b6f7ff0); fix test failures (patches 160 and 161); +workaround erroneously shared _sysconfigdata.py upstream issue #14774; fix +distutils.sysconfig traceback (patch 162); add BuildRequires: xz-devel (for +_lzma module); skip some tests within test_socket (patch 163) + +* Sat Jul 21 2012 Fedora Release Engineering <rel-eng@lists.fedoraproject.org> - 3.2.3-11 +- Rebuilt for https://fedoraproject.org/wiki/Fedora_18_Mass_Rebuild + +* Fri Jul 20 2012 David Malcolm <dmalcolm@redhat.com> - 3.3.0-0.1.b1 + +* Fri Jun 22 2012 David Malcolm <dmalcolm@redhat.com> - 3.2.3-10 +- use macro for power64 (rhbz#834653) + +* Mon Jun 18 2012 David Malcolm <dmalcolm@redhat.com> - 3.2.3-9 +- fix missing include in uid/gid handling patch (patch 157; rhbz#830405) + +* Wed May 30 2012 Bohuslav Kabrda <bkabrda@redhat.com> - 3.2.3-8 +- fix tapset for debug build + +* Tue May 15 2012 David Malcolm <dmalcolm@redhat.com> - 3.2.3-7 +- update uid/gid handling to avoid int overflows seen with uid/gid +values >= 2^31 on 32-bit architectures (patch 157; rhbz#697470) + +* Fri May 4 2012 David Malcolm <dmalcolm@redhat.com> - 3.2.3-6 +- renumber autotools patch from 300 to 5000 +- specfile cleanups + +* Mon Apr 30 2012 David Malcolm <dmalcolm@redhat.com> - 3.2.3-5 +- fix test_gdb.py (patch 156; rhbz#817072) + +* Fri Apr 20 2012 David Malcolm <dmalcolm@redhat.com> - 3.2.3-4 +- avoid allocating thunks in ctypes unless absolutely necessary, to avoid +generating SELinux denials on "import ctypes" and "import uuid" when embedding +Python within httpd (patch 155; rhbz#814391) + +* Fri Apr 20 2012 David Malcolm <dmalcolm@redhat.com> - 3.2.3-3 +- add explicit version requirements on expat to avoid linkage problems with +XML_SetHashSalt + +* Thu Apr 12 2012 David Malcolm <dmalcolm@redhat.com> - 3.2.3-2 +- fix test_gdb (patch 153) + +* Wed Apr 11 2012 David Malcolm <dmalcolm@redhat.com> - 3.2.3-1 +- 3.2.3; refresh patch 102 (lib64); drop upstream patches 148 (gdbm magic +values), 149 (__pycache__ fix); add patch 152 (test_gdb regex) + +* Thu Feb 9 2012 Thomas Spura <tomspur@fedoraproject.org> - 3.2.2-13 +- use newly installed python for byte compiling (now for real) + +* Sun Feb 5 2012 Thomas Spura <tomspur@fedoraproject.org> - 3.2.2-12 +- use newly installed python for byte compiling (#787498) + +* Wed Jan 4 2012 Ville Skyttä <ville.skytta@iki.fi> - 3.2.2-11 +- Build with $RPM_LD_FLAGS (#756863). +- Use xz-compressed source tarball. + +* Wed Dec 07 2011 Karsten Hopp <karsten@redhat.com> 3.2.2-10 +- disable rAssertAlmostEqual in test_cmath on PPC (#750811) + +* Mon Oct 17 2011 Rex Dieter <rdieter@fedoraproject.org> - 3.2.2-9 +- python3-devel missing autogenerated pkgconfig() provides (#746751) + +* Mon Oct 10 2011 David Malcolm <dmalcolm@redhat.com> - 3.2.2-8 +- cherrypick fix for distutils not using __pycache__ when byte-compiling +files (rhbz#722578) + +* Fri Sep 30 2011 David Malcolm <dmalcolm@redhat.com> - 3.2.2-7 +- re-enable gdbm (patch 148; rhbz#742242) + +* Fri Sep 16 2011 David Malcolm <dmalcolm@redhat.com> - 3.2.2-6 +- add a sys._debugmallocstats() function (patch 147) + +* Wed Sep 14 2011 David Malcolm <dmalcolm@redhat.com> - 3.2.2-5 +- support OpenSSL FIPS mode in _hashlib and hashlib; don't build the _md5 and +_sha* modules, relying on _hashlib in hashlib (rhbz#563986; patch 146) + +* Tue Sep 13 2011 David Malcolm <dmalcolm@redhat.com> - 3.2.2-4 +- disable gdbm module to prepare for gdbm soname bump + +* Mon Sep 12 2011 David Malcolm <dmalcolm@redhat.com> - 3.2.2-3 +- renumber and rename patches for consistency with python.spec (8 to 55, 106 +to 104, 6 to 111, 104 to 113, 105 to 114, 125, 131, 130 to 143) + +* Sat Sep 10 2011 David Malcolm <dmalcolm@redhat.com> - 3.2.2-2 +- rewrite of "check", introducing downstream-only hooks for skipping specific +cases in an rpmbuild (patch 132), and fixing/skipping failing tests in a more +fine-grained manner than before; (patches 106, 133-142 sparsely, moving +patches for consistency with python.spec: 128 to 134, 126 to 135, 127 to 141) + +* Tue Sep 6 2011 David Malcolm <dmalcolm@redhat.com> - 3.2.2-1 +- 3.2.2 + +* Thu Sep 1 2011 David Malcolm <dmalcolm@redhat.com> - 3.2.1-7 +- run selftests with "--verbose" +- disable parts of test_io on ppc (rhbz#732998) + +* Wed Aug 31 2011 David Malcolm <dmalcolm@redhat.com> - 3.2.1-6 +- use "--findleaks --verbose3" when running test suite + +* Tue Aug 23 2011 David Malcolm <dmalcolm@redhat.com> - 3.2.1-5 +- re-enable and fix the --with-tsc option on ppc64, and rework it on 32-bit +ppc to avoid aliasing violations (patch 130; rhbz#698726) + +* Tue Aug 23 2011 David Malcolm <dmalcolm@redhat.com> - 3.2.1-4 +- don't use --with-tsc on ppc64 debug builds (rhbz#698726) + +* Thu Aug 18 2011 David Malcolm <dmalcolm@redhat.com> - 3.2.1-3 +- add %%python3_version to the rpm macros (rhbz#719082) + +* Mon Jul 11 2011 Dennis Gilmore <dennis@ausil.us> - 3.2.1-2 +- disable some tests on sparc arches + +* Mon Jul 11 2011 David Malcolm <dmalcolm@redhat.com> - 3.2.1-1 +- 3.2.1; refresh lib64 patch (102), subprocess unit test patch (129), disabling +of static library build (due to Modules/_testembed; patch 6), autotool +intermediates (patch 300) + +* Fri Jul 8 2011 David Malcolm <dmalcolm@redhat.com> - 3.2-5 +- use the gdb hooks from the upstream tarball, rather than keeping our own copy + +* Fri Jul 8 2011 David Malcolm <dmalcolm@redhat.com> - 3.2-4 +- don't run test_openpty and test_pty in %%check + +* Fri Jul 8 2011 David Malcolm <dmalcolm@redhat.com> - 3.2-3 +- cleanup of BuildRequires; add comment headings to specfile sections + +* Tue Apr 19 2011 David Malcolm <dmalcolm@redhat.com> - 3.2-2 +- fix the libpython.stp systemtap tapset (rhbz#697730) + +* Mon Feb 21 2011 David Malcolm <dmalcolm@redhat.com> - 3.2-1 +- 3.2 +- drop alphatag +- regenerate autotool patch + +* Mon Feb 14 2011 David Malcolm <dmalcolm@redhat.com> - 3.2-0.13.rc3 +- add a /usr/bin/python3-debug symlink within the debug subpackage + +* Mon Feb 14 2011 David Malcolm <dmalcolm@redhat.com> - 3.2-0.12.rc3 +- 3.2rc3 +- regenerate autotool patch + +* Wed Feb 09 2011 Fedora Release Engineering <rel-eng@lists.fedoraproject.org> - 3.2-0.11.rc2 +- Rebuilt for https://fedoraproject.org/wiki/Fedora_15_Mass_Rebuild + +* Mon Jan 31 2011 David Malcolm <dmalcolm@redhat.com> - 3.2-0.10.rc2 +- 3.2rc2 + +* Mon Jan 17 2011 David Malcolm <dmalcolm@redhat.com> - 3.2-0.9.rc1 +- 3.2rc1 +- rework patch 6 (static lib removal) +- remove upstreamed patch 130 (ppc debug build) +- regenerate patch 300 (autotool intermediates) +- updated packaging to reflect upstream rewrite of "Demo" (issue 7962) +- added libpython3.so and 2to3-3.2 + +* Wed Jan 5 2011 David Malcolm <dmalcolm@redhat.com> - 3.2-0.8.b2 +- set EXTRA_CFLAGS to our CFLAGS, rather than overriding OPT, fixing a linker +error with dynamic annotations (when configured using --with-valgrind) +- fix the ppc build of the debug configuration (patch 130; rhbz#661510) + +* Tue Jan 4 2011 David Malcolm <dmalcolm@redhat.com> - 3.2-0.7.b2 +- add --with-valgrind to configuration (on architectures that support this) + +* Wed Dec 29 2010 David Malcolm <dmalcolm@redhat.com> - 3.2-0.6.b2 +- work around test_subprocess failure seen in koji (patch 129) + +* Tue Dec 28 2010 David Malcolm <dmalcolm@redhat.com> - 3.2-0.5.b2 +- 3.2b2 +- rework patch 3 (removal of mimeaudio tests), patch 6 (no static libs), +patch 8 (systemtap), patch 102 (lib64) +- remove patch 4 (rendered redundant by upstream r85537), patch 103 (PEP 3149), +patch 110 (upstreamed expat fix), patch 111 (parallel build fix for grammar +fixed upstream) +- regenerate patch 300 (autotool intermediates) +- workaround COUNT_ALLOCS weakref issues in test suite (patch 126, patch 127, +patch 128) +- stop using runtest.sh in %%check (dropped by upstream), replacing with +regrtest; fixup list of failing tests +- introduce "pyshortver", "SOABI_optimized" and "SOABI_debug" macros +- rework manifests of shared libraries to use "SOABI_" macros, reflecting +PEP 3149 +- drop itertools, operator and _collections modules from the manifests as py3k +commit r84058 moved these inside libpython; json/tests moved to test/json_tests +- move turtle code into the tkinter subpackage + +* Wed Nov 17 2010 David Malcolm <dmalcolm@redhat.com> - 3.2-0.5.a1 +- fix sysconfig to not rely on the -devel subpackage (rhbz#653058) + +* Thu Sep 9 2010 David Malcolm <dmalcolm@redhat.com> - 3.2-0.4.a1 +- move most of the content of the core package to the libs subpackage, given +that the libs aren't meaningfully usable without the standard libraries + +* Wed Sep 8 2010 David Malcolm <dmalcolm@redhat.com> - 3.2-0.3.a1 +- Move test.support to core package (rhbz#596258) +- Add various missing __pycache__ directories to payload + +* Sun Aug 22 2010 Toshio Kuratomi <toshio@fedoraproject.org> - 3.2-0.2.a1 +- Add __pycache__ directory for site-packages + +* Sun Aug 22 2010 Thomas Spura <tomspur@fedoraproject.org> - 3.2-0.1.a1 +- on 64bit "stdlib" was still "/usr/lib/python*" (modify *lib64.patch) +- make find-provides-without-python-sonames.sh 64bit aware + +* Sat Aug 21 2010 David Malcolm <dmalcolm@redhat.com> - 3.2-0.0.a1 +- 3.2a1; add alphatag +- rework %%files in the light of PEP 3147 (__pycache__) +- drop our configuration patch to Setup.dist (patch 0): setup.py should do a +better job of things, and the %%files explicitly lists our modules (r82746 +appears to break the old way of doing things). This leads to various modules +changing from "foomodule.so" to "foo.so". It also leads to the optimized build +dropping the _sha1, _sha256 and _sha512 modules, but these are provided by +_hashlib; _weakref becomes a builtin module; xxsubtype goes away (it's only for +testing/devel purposes) +- fixup patches 3, 4, 6, 8, 102, 103, 105, 111 for the rebase +- remove upstream patches: 7 (system expat), 106, 107, 108 (audioop reformat +plus CVE-2010-1634 and CVE-2010-2089), 109 (CVE-2008-5983) +- add machinery for rebuilding "configure" and friends, using the correct +version of autoconf (patch 300) +- patch the debug build's usage of COUNT_ALLOCS to be less verbose (patch 125) +- "modulator" was removed upstream +- drop "-b" from patch applications affecting .py files to avoid littering the +installation tree + +* Thu Aug 19 2010 Toshio Kuratomi <toshio@fedoraproject.org> - 3.1.2-13 +- Turn on computed-gotos. +- Fix for parallel make and graminit.c + +* Fri Jul 2 2010 David Malcolm <dmalcolm@redhat.com> - 3.1.2-12 +- rebuild + +* Fri Jul 2 2010 David Malcolm <dmalcolm@redhat.com> - 3.1.2-11 +- Fix an incompatibility between pyexpat and the system expat-2.0.1 that led to +a segfault running test_pyexpat.py (patch 110; upstream issue 9054; rhbz#610312) + +* Fri Jun 4 2010 David Malcolm <dmalcolm@redhat.com> - 3.1.2-10 +- ensure that the compiler is invoked with "-fwrapv" (rhbz#594819) +- reformat whitespace in audioop.c (patch 106) +- CVE-2010-1634: fix various integer overflow checks in the audioop +module (patch 107) +- CVE-2010-2089: further checks within the audioop module (patch 108) +- CVE-2008-5983: the new PySys_SetArgvEx entry point from r81399 (patch 109) + +* Thu May 27 2010 Dan Horák <dan[at]danny.cz> - 3.1.2-9 +- reading the timestamp counter is available only on some arches (see Python/ceval.c) + +* Wed May 26 2010 David Malcolm <dmalcolm@redhat.com> - 3.1.2-8 +- add flags for statvfs.f_flag to the constant list in posixmodule (i.e. "os") +(patch 105) + +* Tue May 25 2010 David Malcolm <dmalcolm@redhat.com> - 3.1.2-7 +- add configure-time support for COUNT_ALLOCS and CALL_PROFILE debug options +(patch 104); enable them and the WITH_TSC option within the debug build + +* Mon May 24 2010 David Malcolm <dmalcolm@redhat.com> - 3.1.2-6 +- build and install two different configurations of Python 3: debug and +standard, packaging the debug build in a new "python3-debug" subpackage +(patch 103) + +* Tue Apr 13 2010 David Malcolm <dmalcolm@redhat.com> - 3.1.2-5 +- exclude test_http_cookies when running selftests, due to hang seen on +http://koji.fedoraproject.org/koji/taskinfo?taskID=2088463 (cancelled after +11 hours) +- update python-gdb.py from v5 to py3k version submitted upstream + +* Wed Mar 31 2010 David Malcolm <dmalcolm@redhat.com> - 3.1.2-4 +- update python-gdb.py from v4 to v5 (improving performance and stability, +adding commands) + +* Thu Mar 25 2010 David Malcolm <dmalcolm@redhat.com> - 3.1.2-3 +- update python-gdb.py from v3 to v4 (fixing infinite recursion on reference +cycles and tracebacks on bytes 0x80-0xff in strings, adding handlers for sets +and exceptions) + +* Wed Mar 24 2010 David Malcolm <dmalcolm@redhat.com> - 3.1.2-2 +- refresh gdb hooks to v3 (reworking how they are packaged) + +* Sun Mar 21 2010 David Malcolm <dmalcolm@redhat.com> - 3.1.2-1 +- update to 3.1.2: http://www.python.org/download/releases/3.1.2/ +- drop upstreamed patch 2 (.pyc permissions handling) +- drop upstream patch 5 (fix for the test_tk and test_ttk_* selftests) +- drop upstreamed patch 200 (path-fixing script) + +* Sat Mar 20 2010 David Malcolm <dmalcolm@redhat.com> - 3.1.1-28 +- fix typo in libpython.stp (rhbz:575336) + +* Fri Mar 12 2010 David Malcolm <dmalcolm@redhat.com> - 3.1.1-27 +- add pyfuntop.stp example (source 7) +- convert usage of $$RPM_BUILD_ROOT to %%{buildroot} throughout, for +consistency with python.spec + +* Mon Feb 15 2010 Thomas Spura <tomspur@fedoraproject.org> - 3.1.1-26 +- rebuild for new package of redhat-rpm-config (rhbz:564527) +- use 'install -p' when running 'make install' + +* Fri Feb 12 2010 David Malcolm <dmalcolm@redhat.com> - 3.1.1-25 +- split configure options into multiple lines for easy of editing +- add systemtap static markers (wcohen, mjw, dmalcolm; patch 8), a systemtap +tapset defining "python.function.entry" and "python.function.return" to make +the markers easy to use (dmalcolm; source 5), and an example of using the +tapset to the docs (dmalcolm; source 6) (rhbz:545179) + +* Mon Feb 8 2010 David Malcolm <dmalcolm@redhat.com> - 3.1.1-24 +- move the -gdb.py file from %%{_libdir}/INSTSONAME-gdb.py to +%%{_prefix}/lib/debug/%%{_libdir}/INSTSONAME.debug-gdb.py to avoid noise from +ldconfig (bug 562980), and which should also ensure it becomes part of the +debuginfo subpackage, rather than the libs subpackage +- introduce %%{py_SOVERSION} and %%{py_INSTSONAME} to reflect the upstream +configure script, and to avoid fragile scripts that try to figure this out +dynamically (e.g. for the -gdb.py change) + +* Mon Feb 8 2010 David Malcolm <dmalcolm@redhat.com> - 3.1.1-23 +- add gdb hooks for easier debugging (Source 4) + +* Thu Jan 28 2010 David Malcolm <dmalcolm@redhat.com> - 3.1.1-22 +- update python-3.1.1-config.patch to remove downstream customization of build +of pyexpat and elementtree modules +- add patch adapted from upstream (patch 7) to add support for building against +system expat; add --with-system-expat to "configure" invocation +- remove embedded copies of expat and zlib from source tree during "prep" + +* Mon Jan 25 2010 David Malcolm <dmalcolm@redhat.com> - 3.1.1-21 +- introduce %%{dynload_dir} macro +- explicitly list all lib-dynload files, rather than dynamically gathering the +payload into a temporary text file, so that we can be sure what we are +shipping +- introduce a macros.pybytecompile source file, to help with packaging python3 +modules (Source3; written by Toshio) +- rename "2to3-3" to "python3-2to3" to better reflect python 3 module packaging +plans + +* Mon Jan 25 2010 David Malcolm <dmalcolm@redhat.com> - 3.1.1-20 +- change python-3.1.1-config.patch to remove our downstream change to curses +configuration in Modules/Setup.dist, so that the curses modules are built using +setup.py with the downstream default (linking against libncursesw.so, rather +than libncurses.so), rather than within the Makefile; add a test to %%install +to verify the dso files that the curses module is linked against the correct +DSO (bug 539917; changes _cursesmodule.so -> _curses.so) + +* Fri Jan 22 2010 David Malcolm <dmalcolm@redhat.com> - 3.1.1-19 +- add %%py3dir macro to macros.python3 (to be used during unified python 2/3 +builds for setting up the python3 copy of the source tree) + +* Wed Jan 20 2010 David Malcolm <dmalcolm@redhat.com> - 3.1.1-18 +- move lib2to3 from -tools subpackage to main package (bug 556667) + +* Sun Jan 17 2010 David Malcolm <dmalcolm@redhat.com> - 3.1.1-17 +- patch Makefile.pre.in to avoid building static library (patch 6, bug 556092) + +* Fri Jan 15 2010 David Malcolm <dmalcolm@redhat.com> - 3.1.1-16 +- use the %%{_isa} macro to ensure that the python-devel dependency on python +is for the correct multilib arch (#555943) +- delete bundled copy of libffi to make sure we use the system one + +* Fri Jan 15 2010 David Malcolm <dmalcolm@redhat.com> - 3.1.1-15 +- fix the URLs output by pydoc so they point at python.org's 3.1 build of the +docs, rather than the 2.6 build + +* Wed Jan 13 2010 David Malcolm <dmalcolm@redhat.com> - 3.1.1-14 +- replace references to /usr with %%{_prefix}; replace references to +/usr/include with %%{_includedir} (Toshio) + +* Mon Jan 11 2010 David Malcolm <dmalcolm@redhat.com> - 3.1.1-13 +- fix permission on find-provides-without-python-sonames.sh from 775 to 755 + +* Mon Jan 11 2010 David Malcolm <dmalcolm@redhat.com> - 3.1.1-12 +- remove build-time requirements on tix and tk, since we already have +build-time requirements on the -devel subpackages for each of these (Thomas +Spura) +- replace usage of %%define with %%global (Thomas Spura) +- remove forcing of CC=gcc as this old workaround for bug 109268 appears to +longer be necessary +- move various test files from the "tools"/"tkinter" subpackages to the "test" +subpackage + +* Thu Jan 7 2010 David Malcolm <dmalcolm@redhat.com> - 3.1.1-11 +- add %%check section (thanks to Thomas Spura) +- update patch 4 to use correct shebang line +- get rid of stray patch file from buildroot + +* Tue Nov 17 2009 Andrew McNabb <amcnabb@mcnabbs.org> - 3.1.1-10 +- switched a few instances of "find |xargs" to "find -exec" for consistency. +- made the description of __os_install_post more accurate. + +* Wed Nov 4 2009 David Malcolm <dmalcolm@redhat.com> - 3.1.1-9 +- add macros.python3 to the -devel subpackage, containing common macros for use +when packaging python3 modules + +* Tue Nov 3 2009 David Malcolm <dmalcolm@redhat.com> - 3.1.1-8 +- add a provides of "python(abi)" (see bug 532118) +- fix issues identified by a.badger in package review (bug 526126, comment 39): + - use "3" thoughout metadata, rather than "3.*" + - remove conditional around "pkg-config openssl" + - use standard cleanup of RPM_BUILD_ROOT + - replace hardcoded references to /usr with _prefix macro + - stop removing egg-info files + - use /usr/bin/python3.1 rather than /use/bin/env python3.1 when fixing +up shebang lines + - stop attempting to remove no-longer-present .cvsignore files + - move the post/postun sections above the "files" sections + +* Thu Oct 29 2009 David Malcolm <dmalcolm@redhat.com> - 3.1.1-7 +- remove commented-away patch 51 (python-2.6-distutils_rpm.patch): the -O1 +flag is used by default in the upstream code +- "Makefile" and the config-32/64.h file are needed by distutils/sysconfig.py +_init_posix(), so we include them in the core package, along with their parent +directories (bug 531901) + +* Tue Oct 27 2009 David Malcolm <dmalcolm@redhat.com> - 3.1.1-6 +- reword description, based on suggestion by amcnabb +- fix the test_email and test_imp selftests (patch 3 and patch 4 respectively) +- fix the test_tk and test_ttk_* selftests (patch 5) +- fix up the specfile's handling of shebang/perms to avoid corrupting +test_httpservers.py (sed command suggested by amcnabb) + +* Thu Oct 22 2009 David Malcolm <dmalcolm@redhat.com> - 3.1.1-5 +- fixup importlib/_bootstrap.py so that it correctly handles being unable to +open .pyc files for writing (patch 2, upstream issue 7187) +- actually apply the rpath patch (patch 1) + +* Thu Oct 22 2009 David Malcolm <dmalcolm@redhat.com> - 3.1.1-4 +- update patch0's setup of the crypt module to link it against libcrypt +- update patch0 to comment "datetimemodule" back out, so that it is built +using setup.py (see Setup, option 3), thus linking it statically against +timemodule.c and thus avoiding a run-time "undefined symbol: +_PyTime_DoubleToTimet" failure on "import datetime" + +* Wed Oct 21 2009 David Malcolm <dmalcolm@redhat.com> - 3.1.1-3 +- remove executable flag from various files that shouldn't have it +- fix end-of-line encodings +- fix a character encoding + +* Tue Oct 20 2009 David Malcolm <dmalcolm@redhat.com> - 3.1.1-2 +- disable invocation of brp-python-bytecompile in postprocessing, since +it would be with the wrong version of python (adapted from ivazquez' +python3000 specfile) +- use a custom implementation of __find_provides in order to filter out bogus +provides lines for the various .so modules +- fixup distutils/unixccompiler.py to remove standard library path from rpath +(patch 1, was Patch0 in ivazquez' python3000 specfile) +- split out libraries into a -libs subpackage +- update summaries and descriptions, basing content on ivazquez' specfile +- fixup executable permissions on .py, .xpm and .xbm files, based on work in +ivazquez's specfile +- get rid of DOS batch files +- fixup permissions for shared libraries from non-standard 555 to standard 755 +- move /usr/bin/python*-config to the -devel subpackage +- mark various directories as being documentation + +* Thu Sep 24 2009 Andrew McNabb <amcnabb@mcnabbs.org> 3.1.1-1 +- Initial package for Python 3. + |