diff options
Diffstat (limited to 'bcm283x-upstream-fixes.patch')
| -rw-r--r-- | bcm283x-upstream-fixes.patch | 194 |
1 files changed, 194 insertions, 0 deletions
diff --git a/bcm283x-upstream-fixes.patch b/bcm283x-upstream-fixes.patch new file mode 100644 index 000000000..c5ee31784 --- /dev/null +++ b/bcm283x-upstream-fixes.patch @@ -0,0 +1,194 @@ +From da77f737f9f5a487f3a1f80f8546585ee18cd7b9 Mon Sep 17 00:00:00 2001 +From: Eric Anholt <eric@anholt.net> +Date: Fri, 4 Mar 2016 10:39:28 -0800 +Subject: [PATCH 27/36] dt-bindings: Add root properties for Raspberry Pi 3 + +Signed-off-by: Eric Anholt <eric@anholt.net> +Acked-by: Rob Herring <robh@kernel.org> +--- + Documentation/devicetree/bindings/arm/bcm/brcm,bcm2835.txt | 4 ++++ + 1 file changed, 4 insertions(+) + +diff --git a/Documentation/devicetree/bindings/arm/bcm/brcm,bcm2835.txt b/Documentation/devicetree/bindings/arm/bcm/brcm,bcm2835.txt +index 11d3056..6ffe087 100644 +--- a/Documentation/devicetree/bindings/arm/bcm/brcm,bcm2835.txt ++++ b/Documentation/devicetree/bindings/arm/bcm/brcm,bcm2835.txt +@@ -30,6 +30,10 @@ Raspberry Pi 2 Model B + Required root node properties: + compatible = "raspberrypi,2-model-b", "brcm,bcm2836"; + ++Raspberry Pi 3 Model B ++Required root node properties: ++compatible = "raspberrypi,3-model-b", "brcm,bcm2837"; ++ + Raspberry Pi Compute Module + Required root node properties: + compatible = "raspberrypi,compute-module", "brcm,bcm2835"; +-- +2.7.3 + +From b76b1cdf2e569cceab41dcf3b3f6a90965d0a02c Mon Sep 17 00:00:00 2001 +From: Eric Anholt <eric@anholt.net> +Date: Fri, 4 Mar 2016 10:39:29 -0800 +Subject: [PATCH 28/36] ARM: bcm2835: Add devicetree for the Raspberry Pi 3. + +For now this doesn't support the new hardware present on the Pi 3 (BT, +wifi, GPIO expander). Since the GPIO expander isn't supported, we +also don't have the LEDs like the other board files do. + +Signed-off-by: Eric Anholt <eric@anholt.net> +Acked-by: Stephen Warren <swarren@wwwdotorg.org> +--- + arch/arm/boot/dts/Makefile | 3 +- + arch/arm/boot/dts/bcm2837-rpi-3-b.dts | 22 ++++++++++++ + arch/arm/boot/dts/bcm2837.dtsi | 68 +++++++++++++++++++++++++++++++++++ + 3 files changed, 92 insertions(+), 1 deletion(-) + create mode 100644 arch/arm/boot/dts/bcm2837-rpi-3-b.dts + create mode 100644 arch/arm/boot/dts/bcm2837.dtsi + +diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile +index d000814..a8a0767 100644 +--- a/arch/arm/boot/dts/Makefile ++++ b/arch/arm/boot/dts/Makefile +@@ -64,7 +64,8 @@ dtb-$(CONFIG_ARCH_BCM2835) += \ + bcm2835-rpi-b-rev2.dtb \ + bcm2835-rpi-b-plus.dtb \ + bcm2835-rpi-a-plus.dtb \ +- bcm2836-rpi-2-b.dtb ++ bcm2836-rpi-2-b.dtb \ ++ bcm2837-rpi-3-b.dtb + dtb-$(CONFIG_ARCH_BCM_5301X) += \ + bcm4708-asus-rt-ac56u.dtb \ + bcm4708-asus-rt-ac68u.dtb \ +diff --git a/arch/arm/boot/dts/bcm2837-rpi-3-b.dts b/arch/arm/boot/dts/bcm2837-rpi-3-b.dts +new file mode 100644 +index 0000000..5e8eafd +--- /dev/null ++++ b/arch/arm/boot/dts/bcm2837-rpi-3-b.dts +@@ -0,0 +1,22 @@ ++/dts-v1/; ++#include "bcm2837.dtsi" ++#include "bcm2835-rpi.dtsi" ++ ++/ { ++ compatible = "raspberrypi,3-model-b", "brcm,bcm2837"; ++ model = "Raspberry Pi 3 Model B"; ++ ++ memory { ++ reg = <0 0x40000000>; ++ }; ++}; ++ ++&gpio { ++ pinctrl-0 = <&gpioout &alt0 &i2s_alt0 &alt3>; ++ ++ /* I2S interface */ ++ i2s_alt0: i2s_alt0 { ++ brcm,pins = <28 29 30 31>; ++ brcm,function = <BCM2835_FSEL_ALT2>; ++ }; ++}; +diff --git a/arch/arm/boot/dts/bcm2837.dtsi b/arch/arm/boot/dts/bcm2837.dtsi +new file mode 100644 +index 0000000..2f36722 +--- /dev/null ++++ b/arch/arm/boot/dts/bcm2837.dtsi +@@ -0,0 +1,68 @@ ++#include "bcm283x.dtsi" ++ ++/ { ++ compatible = "brcm,bcm2836"; ++ ++ soc { ++ ranges = <0x7e000000 0x3f000000 0x1000000>, ++ <0x40000000 0x40000000 0x00001000>; ++ dma-ranges = <0xc0000000 0x00000000 0x3f000000>; ++ ++ local_intc: local_intc { ++ compatible = "brcm,bcm2836-l1-intc"; ++ reg = <0x40000000 0x100>; ++ interrupt-controller; ++ #interrupt-cells = <1>; ++ interrupt-parent = <&local_intc>; ++ }; ++ }; ++ ++ timer { ++ compatible = "arm,armv7-timer"; ++ interrupt-parent = <&local_intc>; ++ interrupts = <0>, // PHYS_SECURE_PPI ++ <1>, // PHYS_NONSECURE_PPI ++ <3>, // VIRT_PPI ++ <2>; // HYP_PPI ++ always-on; ++ }; ++ ++ cpus: cpus { ++ #address-cells = <1>; ++ #size-cells = <0>; ++ ++ cpu0: cpu@0 { ++ device_type = "cpu"; ++ compatible = "arm,cortex-a53"; ++ reg = <0>; ++ }; ++ ++ cpu1: cpu@1 { ++ device_type = "cpu"; ++ compatible = "arm,cortex-a53"; ++ reg = <1>; ++ }; ++ ++ cpu2: cpu@2 { ++ device_type = "cpu"; ++ compatible = "arm,cortex-a53"; ++ reg = <2>; ++ }; ++ ++ cpu3: cpu@3 { ++ device_type = "cpu"; ++ compatible = "arm,cortex-a53"; ++ reg = <3>; ++ }; ++ }; ++}; ++ ++/* Make the BCM2835-style global interrupt controller be a child of the ++ * CPU-local interrupt controller. ++ */ ++&intc { ++ compatible = "brcm,bcm2836-armctrl-ic"; ++ reg = <0x7e00b200 0x200>; ++ interrupt-parent = <&local_intc>; ++ interrupts = <8>; ++}; +-- +2.7.3 + +From 528285e99c25249456023d28f521689bf9e9eb8b Mon Sep 17 00:00:00 2001 +From: Peter Robinson <pbrobinson@gmail.com> +Date: Wed, 30 Mar 2016 09:35:13 +0100 +Subject: [PATCH 32/36] drop usb power domain support for the moment, kills usb + +--- + arch/arm/boot/dts/bcm2835-rpi.dtsi | 4 ---- + 1 file changed, 4 deletions(-) + +diff --git a/arch/arm/boot/dts/bcm2835-rpi.dtsi b/arch/arm/boot/dts/bcm2835-rpi.dtsi +index caf2707..b1e8145 100644 +--- a/arch/arm/boot/dts/bcm2835-rpi.dtsi ++++ b/arch/arm/boot/dts/bcm2835-rpi.dtsi +@@ -71,10 +71,6 @@ + status = "okay"; + }; + +-&usb { +- power-domains = <&power RPI_POWER_DOMAIN_USB>; +-}; +- + &v3d { + power-domains = <&power RPI_POWER_DOMAIN_V3D>; + }; +-- +2.7.3 + |