diff options
| -rw-r--r-- | ARM-mvebu-change-order-of-ethernet-DT-nodes-on-Armada-38x.patch | 101 | ||||
| -rw-r--r-- | Fix-tegra-to-use-stdout-path-for-serial-console.patch | 318 | ||||
| -rw-r--r-- | Geekbox-device-tree-support.patch | 437 | ||||
| -rw-r--r-- | Initial-AllWinner-A64-and-PINE64-support.patch | 1882 | ||||
| -rw-r--r-- | config-arm-generic | 59 | ||||
| -rw-r--r-- | config-arm64 | 28 | ||||
| -rw-r--r-- | config-armv7 | 24 | ||||
| -rw-r--r-- | config-armv7-generic | 78 | ||||
| -rw-r--r-- | config-generic | 6 | ||||
| -rw-r--r-- | config-nodebug | 114 | ||||
| -rw-r--r-- | config-x86-generic | 2 | ||||
| -rw-r--r-- | gitrev | 2 | ||||
| -rw-r--r-- | kernel.spec | 32 | ||||
| -rw-r--r-- | sources | 3 |
14 files changed, 2957 insertions, 129 deletions
diff --git a/ARM-mvebu-change-order-of-ethernet-DT-nodes-on-Armada-38x.patch b/ARM-mvebu-change-order-of-ethernet-DT-nodes-on-Armada-38x.patch new file mode 100644 index 000000000..cff3d3339 --- /dev/null +++ b/ARM-mvebu-change-order-of-ethernet-DT-nodes-on-Armada-38x.patch @@ -0,0 +1,101 @@ +From patchwork Wed Jan 27 15:08:19 2016 +Content-Type: text/plain; charset="utf-8" +MIME-Version: 1.0 +Content-Transfer-Encoding: 7bit +Subject: [1/2] ARM: mvebu: change order of ethernet DT nodes on Armada 38x +From: Thomas Petazzoni <thomas.petazzoni@free-electrons.com> +X-Patchwork-Id: 8134751 +Message-Id: <1453907300-28283-2-git-send-email-thomas.petazzoni@free-electrons.com> +To: Jason Cooper <jason@lakedaemon.net>, Andrew Lunn <andrew@lunn.ch>, + Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com>, + Gregory Clement <gregory.clement@free-electrons.com> +Cc: Nadav Haklai <nadavh@marvell.com>, Lior Amsalem <alior@marvell.com>, + Thomas Petazzoni <thomas.petazzoni@free-electrons.com>, + linux-arm-kernel@lists.infradead.org +Date: Wed, 27 Jan 2016 16:08:19 +0100 + +On Armada 38x, the available network interfaces are: + + - port 0, at 0x70000 + - port 1, at 0x30000 + - port 2, at 0x34000 + +Due to the rule saying that DT nodes should be ordered by register +addresses, the network interfaces are probed in this order: + + - port 1, at 0x30000, which gets named eth0 + - port 2, at 0x34000, which gets named eth1 + - port 0, at 0x70000, which gets named eth2 + +(if all three ports are enabled at the board level) + +Unfortunately, the network subsystem doesn't provide any way to rename +network interfaces from the kernel (it can only be done from +userspace). So, the default naming of the network interfaces is very +confusing as it doesn't match the datasheet, nor the naming of the +interfaces in the bootloader, nor the naming of the interfaces on +labels printed on the board. + +For example, on the Armada 388 GP, the board has two ports, labelled +GE0 and GE1. One has to know that GE0 is eth1 and GE1 is eth0, which +isn't really obvious. + +In order to solve this, this patch proposes to exceptionaly violate +the rule of "order DT nodes by register address", and put the 0x70000 +node before the 0x30000 node, so that network interfaces get named in +a more natural way. + +Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com> + +--- +arch/arm/boot/dts/armada-38x.dtsi | 30 +++++++++++++++++++++--------- + 1 file changed, 21 insertions(+), 9 deletions(-) + +diff --git a/arch/arm/boot/dts/armada-38x.dtsi b/arch/arm/boot/dts/armada-38x.dtsi +index e8b7f67..b50784d 100644 +--- a/arch/arm/boot/dts/armada-38x.dtsi ++++ b/arch/arm/boot/dts/armada-38x.dtsi +@@ -429,6 +429,27 @@ + reg = <0x22000 0x1000>; + }; + ++ /* ++ * As a special exception to the "order by ++ * register address" rule, the eth0 node is ++ * placed here to ensure that it gets ++ * registered as the first interface, since ++ * the network subsystem doesn't allow naming ++ * interfaces using DT aliases. Without this, ++ * the ordering of interfaces is different ++ * from the one used in U-Boot and the ++ * labeling of interfaces on the boards, which ++ * is very confusing for users. ++ */ ++ eth0: ethernet@70000 { ++ compatible = "marvell,armada-370-neta"; ++ reg = <0x70000 0x4000>; ++ interrupts-extended = <&mpic 8>; ++ clocks = <&gateclk 4>; ++ tx-csum-limit = <9800>; ++ status = "disabled"; ++ }; ++ + eth1: ethernet@30000 { + compatible = "marvell,armada-370-neta"; + reg = <0x30000 0x4000>; +@@ -493,15 +514,6 @@ + }; + }; + +- eth0: ethernet@70000 { +- compatible = "marvell,armada-370-neta"; +- reg = <0x70000 0x4000>; +- interrupts-extended = <&mpic 8>; +- clocks = <&gateclk 4>; +- tx-csum-limit = <9800>; +- status = "disabled"; +- }; +- + mdio: mdio@72004 { + #address-cells = <1>; + #size-cells = <0>; diff --git a/Fix-tegra-to-use-stdout-path-for-serial-console.patch b/Fix-tegra-to-use-stdout-path-for-serial-console.patch new file mode 100644 index 000000000..80a2d1b95 --- /dev/null +++ b/Fix-tegra-to-use-stdout-path-for-serial-console.patch @@ -0,0 +1,318 @@ +From 15b8caef5f380d9465876478ff5e365bc6afa5b6 Mon Sep 17 00:00:00 2001 +From: Peter Robinson <pbrobinson@gmail.com> +Date: Sun, 6 Mar 2016 10:59:13 +0000 +Subject: [PATCH] Fix tegra to use stdout-path for serial console + +--- + arch/arm/boot/dts/tegra114-dalmore.dts | 4 ++++ + arch/arm/boot/dts/tegra124-jetson-tk1.dts | 4 ++++ + arch/arm/boot/dts/tegra124-nyan.dtsi | 4 ++++ + arch/arm/boot/dts/tegra124-venice2.dts | 4 ++++ + arch/arm/boot/dts/tegra20-harmony.dts | 4 ++++ + arch/arm/boot/dts/tegra20-iris-512.dts | 4 ++++ + arch/arm/boot/dts/tegra20-medcom-wide.dts | 4 ++++ + arch/arm/boot/dts/tegra20-paz00.dts | 4 ++++ + arch/arm/boot/dts/tegra20-seaboard.dts | 4 ++++ + arch/arm/boot/dts/tegra20-tamonten.dtsi | 4 ++++ + arch/arm/boot/dts/tegra20-trimslice.dts | 4 ++++ + arch/arm/boot/dts/tegra20-ventana.dts | 4 ++++ + arch/arm/boot/dts/tegra20-whistler.dts | 4 ++++ + arch/arm/boot/dts/tegra30-apalis-eval.dts | 4 ++++ + arch/arm/boot/dts/tegra30-beaver.dts | 4 ++++ + arch/arm/boot/dts/tegra30-cardhu.dtsi | 4 ++++ + arch/arm/boot/dts/tegra30-colibri-eval-v3.dts | 4 ++++ + arch/arm64/boot/dts/nvidia/tegra132-norrin.dts | 5 ++++- + arch/arm64/boot/dts/nvidia/tegra210-p2530.dtsi | 4 ++++ + 19 files changed, 76 insertions(+), 1 deletion(-) + +diff --git a/arch/arm/boot/dts/tegra114-dalmore.dts b/arch/arm/boot/dts/tegra114-dalmore.dts +index 8b7aa0d..b5748ee 100644 +--- a/arch/arm/boot/dts/tegra114-dalmore.dts ++++ b/arch/arm/boot/dts/tegra114-dalmore.dts +@@ -18,6 +18,10 @@ + serial0 = &uartd; + }; + ++ chosen { ++ stdout-path = "serial0:115200n8"; ++ }; ++ + memory { + reg = <0x80000000 0x40000000>; + }; +diff --git a/arch/arm/boot/dts/tegra124-jetson-tk1.dts b/arch/arm/boot/dts/tegra124-jetson-tk1.dts +index 66b4451..abf046a 100644 +--- a/arch/arm/boot/dts/tegra124-jetson-tk1.dts ++++ b/arch/arm/boot/dts/tegra124-jetson-tk1.dts +@@ -15,6 +15,10 @@ + serial0 = &uartd; + }; + ++ chosen { ++ stdout-path = "serial0:115200n8"; ++ }; ++ + memory { + reg = <0x0 0x80000000 0x0 0x80000000>; + }; +diff --git a/arch/arm/boot/dts/tegra124-nyan.dtsi b/arch/arm/boot/dts/tegra124-nyan.dtsi +index ec1aa64..e2cd39e 100644 +--- a/arch/arm/boot/dts/tegra124-nyan.dtsi ++++ b/arch/arm/boot/dts/tegra124-nyan.dtsi +@@ -8,6 +8,10 @@ + serial0 = &uarta; + }; + ++ chosen { ++ stdout-path = "serial0:115200n8"; ++ }; ++ + memory { + reg = <0x0 0x80000000 0x0 0x80000000>; + }; +diff --git a/arch/arm/boot/dts/tegra124-venice2.dts b/arch/arm/boot/dts/tegra124-venice2.dts +index cfbdf42..604f4b7 100644 +--- a/arch/arm/boot/dts/tegra124-venice2.dts ++++ b/arch/arm/boot/dts/tegra124-venice2.dts +@@ -13,6 +13,10 @@ + serial0 = &uarta; + }; + ++ chosen { ++ stdout-path = "serial0:115200n8"; ++ }; ++ + memory { + reg = <0x0 0x80000000 0x0 0x80000000>; + }; +diff --git a/arch/arm/boot/dts/tegra20-harmony.dts b/arch/arm/boot/dts/tegra20-harmony.dts +index b926a07..4b73c76 100644 +--- a/arch/arm/boot/dts/tegra20-harmony.dts ++++ b/arch/arm/boot/dts/tegra20-harmony.dts +@@ -13,6 +13,10 @@ + serial0 = &uartd; + }; + ++ chosen { ++ stdout-path = "serial0:115200n8"; ++ }; ++ + memory { + reg = <0x00000000 0x40000000>; + }; +diff --git a/arch/arm/boot/dts/tegra20-iris-512.dts b/arch/arm/boot/dts/tegra20-iris-512.dts +index 1dd7d7b..bb56dfe 100644 +--- a/arch/arm/boot/dts/tegra20-iris-512.dts ++++ b/arch/arm/boot/dts/tegra20-iris-512.dts +@@ -11,6 +11,10 @@ + serial1 = &uartd; + }; + ++ chosen { ++ stdout-path = "serial0:115200n8"; ++ }; ++ + host1x@50000000 { + hdmi@54280000 { + status = "okay"; +diff --git a/arch/arm/boot/dts/tegra20-medcom-wide.dts b/arch/arm/boot/dts/tegra20-medcom-wide.dts +index 9b87526..34c6588 100644 +--- a/arch/arm/boot/dts/tegra20-medcom-wide.dts ++++ b/arch/arm/boot/dts/tegra20-medcom-wide.dts +@@ -10,6 +10,10 @@ + serial0 = &uartd; + }; + ++ chosen { ++ stdout-path = "serial0:115200n8"; ++ }; ++ + pwm@7000a000 { + status = "okay"; + }; +diff --git a/arch/arm/boot/dts/tegra20-paz00.dts b/arch/arm/boot/dts/tegra20-paz00.dts +index ed7e100..81a10a9 100644 +--- a/arch/arm/boot/dts/tegra20-paz00.dts ++++ b/arch/arm/boot/dts/tegra20-paz00.dts +@@ -14,6 +14,10 @@ + serial1 = &uartc; + }; + ++ chosen { ++ stdout-path = "serial0:115200n8"; ++ }; ++ + memory { + reg = <0x00000000 0x20000000>; + }; +diff --git a/arch/arm/boot/dts/tegra20-seaboard.dts b/arch/arm/boot/dts/tegra20-seaboard.dts +index aea8994..0aed748 100644 +--- a/arch/arm/boot/dts/tegra20-seaboard.dts ++++ b/arch/arm/boot/dts/tegra20-seaboard.dts +@@ -13,6 +13,10 @@ + serial0 = &uartd; + }; + ++ chosen { ++ stdout-path = "serial0:115200n8"; ++ }; ++ + memory { + reg = <0x00000000 0x40000000>; + }; +diff --git a/arch/arm/boot/dts/tegra20-tamonten.dtsi b/arch/arm/boot/dts/tegra20-tamonten.dtsi +index 13d4e61..025e9e8 100644 +--- a/arch/arm/boot/dts/tegra20-tamonten.dtsi ++++ b/arch/arm/boot/dts/tegra20-tamonten.dtsi +@@ -10,6 +10,10 @@ + serial0 = &uartd; + }; + ++ chosen { ++ stdout-path = "serial0:115200n8"; ++ }; ++ + memory { + reg = <0x00000000 0x20000000>; + }; +diff --git a/arch/arm/boot/dts/tegra20-trimslice.dts b/arch/arm/boot/dts/tegra20-trimslice.dts +index d99af4e..69d25ca 100644 +--- a/arch/arm/boot/dts/tegra20-trimslice.dts ++++ b/arch/arm/boot/dts/tegra20-trimslice.dts +@@ -13,6 +13,10 @@ + serial0 = &uarta; + }; + ++ chosen { ++ stdout-path = "serial0:115200n8"; ++ }; ++ + memory { + reg = <0x00000000 0x40000000>; + }; +diff --git a/arch/arm/boot/dts/tegra20-ventana.dts b/arch/arm/boot/dts/tegra20-ventana.dts +index 04c58e9..c61533a 100644 +--- a/arch/arm/boot/dts/tegra20-ventana.dts ++++ b/arch/arm/boot/dts/tegra20-ventana.dts +@@ -13,6 +13,10 @@ + serial0 = &uartd; + }; + ++ chosen { ++ stdout-path = "serial0:115200n8"; ++ }; ++ + memory { + reg = <0x00000000 0x40000000>; + }; +diff --git a/arch/arm/boot/dts/tegra20-whistler.dts b/arch/arm/boot/dts/tegra20-whistler.dts +index 340d811..bd76585 100644 +--- a/arch/arm/boot/dts/tegra20-whistler.dts ++++ b/arch/arm/boot/dts/tegra20-whistler.dts +@@ -13,6 +13,10 @@ + serial0 = &uarta; + }; + ++ chosen { ++ stdout-path = "serial0:115200n8"; ++ }; ++ + memory { + reg = <0x00000000 0x20000000>; + }; +diff --git a/arch/arm/boot/dts/tegra30-apalis-eval.dts b/arch/arm/boot/dts/tegra30-apalis-eval.dts +index f2879cf..b914bcb 100644 +--- a/arch/arm/boot/dts/tegra30-apalis-eval.dts ++++ b/arch/arm/boot/dts/tegra30-apalis-eval.dts +@@ -17,6 +17,10 @@ + serial3 = &uartd; + }; + ++ chosen { ++ stdout-path = "serial0:115200n8"; ++ }; ++ + pcie-controller@00003000 { + status = "okay"; + +diff --git a/arch/arm/boot/dts/tegra30-beaver.dts b/arch/arm/boot/dts/tegra30-beaver.dts +index 3dede39..1eca3b2 100644 +--- a/arch/arm/boot/dts/tegra30-beaver.dts ++++ b/arch/arm/boot/dts/tegra30-beaver.dts +@@ -12,6 +12,10 @@ + serial0 = &uarta; + }; + ++ chosen { ++ stdout-path = "serial0:115200n8"; ++ }; ++ + memory { + reg = <0x80000000 0x7ff00000>; + }; +diff --git a/arch/arm/boot/dts/tegra30-cardhu.dtsi b/arch/arm/boot/dts/tegra30-cardhu.dtsi +index bb1ca15..de9d6cc 100644 +--- a/arch/arm/boot/dts/tegra30-cardhu.dtsi ++++ b/arch/arm/boot/dts/tegra30-cardhu.dtsi +@@ -35,6 +35,10 @@ + serial1 = &uartc; + }; + ++ chosen { ++ stdout-path = "serial0:115200n8"; ++ }; ++ + memory { + reg = <0x80000000 0x40000000>; + }; +diff --git a/arch/arm/boot/dts/tegra30-colibri-eval-v3.dts b/arch/arm/boot/dts/tegra30-colibri-eval-v3.dts +index 3ff019f..93e1ffd 100644 +--- a/arch/arm/boot/dts/tegra30-colibri-eval-v3.dts ++++ b/arch/arm/boot/dts/tegra30-colibri-eval-v3.dts +@@ -15,6 +15,10 @@ + serial2 = &uartd; + }; + ++ chosen { ++ stdout-path = "serial0:115200n8"; ++ }; ++ + host1x@50000000 { + dc@54200000 { + rgb { +diff --git a/arch/arm64/boot/dts/nvidia/tegra132-norrin.dts b/arch/arm64/boot/dts/nvidia/tegra132-norrin.dts +index 62f33fc..3c0b4d7 100644 +--- a/arch/arm64/boot/dts/nvidia/tegra132-norrin.dts ++++ b/arch/arm64/boot/dts/nvidia/tegra132-norrin.dts +@@ -10,9 +10,12 @@ + aliases { + rtc0 = "/i2c@0,7000d000/as3722@40"; + rtc1 = "/rtc@0,7000e000"; ++ serial0 = &uarta; + }; + +- chosen { }; ++ chosen { ++ stdout-path = "serial0:115200n8"; ++ }; + + memory { + device_type = "memory"; +diff --git a/arch/arm64/boot/dts/nvidia/tegra210-p2530.dtsi b/arch/arm64/boot/dts/nvidia/tegra210-p2530.dtsi +index ece0dec..73ba582 100644 +--- a/arch/arm64/boot/dts/nvidia/tegra210-p2530.dtsi ++++ b/arch/arm64/boot/dts/nvidia/tegra210-p2530.dtsi +@@ -9,6 +9,10 @@ + serial0 = &uarta; + }; + ++ chosen { ++ stdout-path = "serial0:115200n8"; ++ }; ++ + memory { + device_type = "memory"; + reg = <0x0 0x80000000 0x0 0xc0000000>; +-- +2.5.0 + diff --git a/Geekbox-device-tree-support.patch b/Geekbox-device-tree-support.patch new file mode 100644 index 000000000..51caf8aaf --- /dev/null +++ b/Geekbox-device-tree-support.patch @@ -0,0 +1,437 @@ +From a516bbf04744817e49e173b2a217a2a6366b5f9c Mon Sep 17 00:00:00 2001 +From: Peter Robinson <pbrobinson@gmail.com> +Date: Wed, 2 Mar 2016 18:12:09 +0000 +Subject: [PATCH] Geekbox device tree support + +--- + Documentation/devicetree/bindings/arm/rockchip.txt | 9 + + arch/arm64/boot/dts/rockchip/Makefile | 2 + + .../dts/rockchip/rk3368-geekbox-landingship.dts | 56 ++++ + arch/arm64/boot/dts/rockchip/rk3368-geekbox.dts | 321 +++++++++++++++++++++ + 4 files changed, 388 insertions(+) + create mode 100644 arch/arm64/boot/dts/rockchip/rk3368-geekbox-landingship.dts + create mode 100644 arch/arm64/boot/dts/rockchip/rk3368-geekbox.dts + +diff --git a/Documentation/devicetree/bindings/arm/rockchip.txt b/Documentation/devicetree/bindings/arm/rockchip.txt +index 078c14f..c6d95f2 100644 +--- a/Documentation/devicetree/bindings/arm/rockchip.txt ++++ b/Documentation/devicetree/bindings/arm/rockchip.txt +@@ -87,6 +87,15 @@ Rockchip platforms device tree bindings + "google,veyron-speedy-rev3", "google,veyron-speedy-rev2", + "google,veyron-speedy", "google,veyron", "rockchip,rk3288"; + ++- GeekBuying GeekBox: ++ Required root node properties: ++ - compatible = "geekbuying,geekbox", "rockchip,rk3368"; ++ ++- GeekBuying Landingship: ++ Required root node properties: ++ - compatible = "geekbuying,landingship", ++ "geekbuying,geekbox", "rockchip,rk3368"; ++ + - Rockchip RK3368 evb: + Required root node properties: + - compatible = "rockchip,rk3368-evb-act8846", "rockchip,rk3368"; +diff --git a/arch/arm64/boot/dts/rockchip/Makefile b/arch/arm64/boot/dts/rockchip/Makefile +index e3f0b5f..201bcd9 100644 +--- a/arch/arm64/boot/dts/rockchip/Makefile ++++ b/arch/arm64/boot/dts/rockchip/Makefile +@@ -1,4 +1,6 @@ + dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3368-evb-act8846.dtb ++dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3368-geekbox.dtb ++dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3368-geekbox-landingship.dtb + dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3368-r88.dtb + + always := $(dtb-y) +diff --git a/arch/arm64/boot/dts/rockchip/rk3368-geekbox-landingship.dts b/arch/arm64/boot/dts/rockchip/rk3368-geekbox-landingship.dts +new file mode 100644 +index 0000000..e4a1175 +--- /dev/null ++++ b/arch/arm64/boot/dts/rockchip/rk3368-geekbox-landingship.dts +@@ -0,0 +1,56 @@ ++/* ++ * Copyright (c) 2016 Andreas Färber ++ * ++ * This file is dual-licensed: you can use it either under the terms ++ * of the GPL or the X11 license, at your option. Note that this dual ++ * licensing only applies to this file, and not this project as a ++ * whole. ++ * ++ * a) This file is free software; you can redistribute it and/or ++ * modify it under the terms of the GNU General Public License as ++ * published by the Free Software Foundation; either version 2 of the ++ * License, or (at your option) any later version. ++ * ++ * This file is distributed in the hope that it will be useful, ++ * but WITHOUT ANY WARRANTY; without even the implied warranty of ++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the ++ * GNU General Public License for more details. ++ * ++ * Or, alternatively, ++ * ++ * b) Permission is hereby granted, free of charge, to any person ++ * obtaining a copy of this software and associated documentation ++ * files (the "Software"), to deal in the Software without ++ * restriction, including without limitation the rights to use, ++ * copy, modify, merge, publish, distribute, sublicense, and/or ++ * sell copies of the Software, and to permit persons to whom the ++ * Software is furnished to do so, subject to the following ++ * conditions: ++ * ++ * The above copyright notice and this permission notice shall be ++ * included in all copies or substantial portions of the Software. ++ * ++ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, ++ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES ++ * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND ++ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT ++ * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, ++ * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING ++ * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR ++ * OTHER DEALINGS IN THE SOFTWARE. ++ */ ++ ++#include "rk3368-geekbox.dts" ++ ++/ { ++ model = "GeekBox on Landingship"; ++ compatible = "geekbuying,landingship", "geekbuying,geekbox", "rockchip,rk3368"; ++}; ++ ++&i2c1 { ++ status = "okay"; ++}; ++ ++&i2c2 { ++ status = "okay"; ++}; +diff --git a/arch/arm64/boot/dts/rockchip/rk3368-geekbox.dts b/arch/arm64/boot/dts/rockchip/rk3368-geekbox.dts +new file mode 100644 +index 0000000..7e51876 +--- /dev/null ++++ b/arch/arm64/boot/dts/rockchip/rk3368-geekbox.dts +@@ -0,0 +1,321 @@ ++/* ++ * Copyright (c) 2016 Andreas Färber ++ * ++ * This file is dual-licensed: you can use it either under the terms ++ * of the GPL or the X11 license, at your option. Note that this dual ++ * licensing only applies to this file, and not this project as a ++ * whole. ++ * ++ * a) This file is free software; you can redistribute it and/or ++ * modify it under the terms of the GNU General Public License as ++ * published by the Free Software Foundation; either version 2 of the ++ * License, or (at your option) any later version. ++ * ++ * This file is distributed in the hope that it will be useful, ++ * but WITHOUT ANY WARRANTY; without even the implied warranty of ++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the ++ * GNU General Public License for more details. ++ * ++ * Or, alternatively, ++ * ++ * b) Permission is hereby granted, free of charge, to any person ++ * obtaining a copy of this software and associated documentation ++ * files (the "Software"), to deal in the Software without ++ * restriction, including without limitation the rights to use, ++ * copy, modify, merge, publish, distribute, sublicense, and/or ++ * sell copies of the Software, and to permit persons to whom the ++ * Software is furnished to do so, subject to the following ++ * conditions: ++ * ++ * The above copyright notice and this permission notice shall be ++ * included in all copies or substantial portions of the Software. ++ * ++ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, ++ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES ++ * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND ++ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT ++ * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, ++ * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING ++ * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR ++ * OTHER DEALINGS IN THE SOFTWARE. ++ */ ++ ++/dts-v1/; ++#include "rk3368.dtsi" ++ ++/ { ++ model = "GeekBox"; ++ compatible = "geekbuying,geekbox", "rockchip,rk3368"; ++ ++ chosen { ++ stdout-path = "serial2:115200n8"; ++ }; ++ ++ memory { ++ device_type = "memory"; ++ reg = <0x0 0x0 0x0 0x80000000>; ++ }; ++ ++ ext_gmac: gmac-clk { ++ compatible = "fixed-clock"; ++ clock-frequency = <125000000>; ++ clock-output-names = "ext_gmac"; ++ #clock-cells = <0>; ++ }; ++ ++ ir: ir-receiver { ++ compatible = "gpio-ir-receiver"; ++ gpios = <&gpio3 30 GPIO_ACTIVE_LOW>; ++ pinctrl-names = "default"; ++ pinctrl-0 = <&ir_int>; ++ }; ++ ++ keys: gpio-keys { ++ compatible = "gpio-keys"; ++ pinctrl-names = "default"; ++ pinctrl-0 = <&pwr_key>; ++ #address-cells = <1>; ++ #size-cells = <0>; ++ ++ button@0 { ++ reg = <0>; ++ gpio-key,wakeup = <1>; ++ gpios = <&gpio0 2 GPIO_ACTIVE_LOW>; ++ label = "GPIO Power"; ++ linux,code = <116>; ++ }; ++ }; ++ ++ leds: gpio-leds { ++ compatible = "gpio-leds"; ++ ++ blue { ++ gpios = <&gpio2 2 GPIO_ACTIVE_HIGH>; ++ label = "geekbox:blue:led"; ++ default-state = "on"; ++ }; ++ ++ red { ++ gpios = <&gpio2 3 GPIO_ACTIVE_HIGH>; ++ label = "geekbox:red:led"; ++ default-state = "off"; ++ }; ++ }; ++ ++ vcc_sys: vcc-sys-regulator { ++ compatible = "regulator-fixed"; ++ regulator-name = "vcc_sys"; ++ regulator-min-microvolt = <5000000>; ++ regulator-max-microvolt = <5000000>; ++ regulator-always-on; ++ regulator-boot-on; ++ }; ++}; ++ ++&emmc { ++ status = "okay"; ++ bus-width = <8>; ++ cap-mmc-highspeed; ++ clock-frequency = <150000000>; ++ disable-wp; ++ keep-power-in-suspend; ++ non-removable; ++ num-slots = <1>; ++ vmmc-supply = <&vcc_io>; ++ vqmmc-supply = <&vcc18_flash>; ++ pinctrl-names = "default"; ++ pinctrl-0 = <&emmc_clk>, <&emmc_cmd>, <&emmc_bus8>; ++}; ++ ++&gmac { ++ status = "okay"; ++ phy-supply = <&vcc_lan>; ++ phy-mode = "rgmii"; ++ clock_in_out = "input"; ++ assigned-clocks = <&cru SCLK_MAC>; ++ assigned-clock-parents = <&ext_gmac>; ++ pinctrl-names = "default"; ++ pinctrl-0 = <&rgmii_pins>; ++ tx_delay = <0x30>; ++ rx_delay = <0x10>; ++}; ++ ++&i2c0 { ++ status = "okay"; ++ ++ rk808: pmic@1b { ++ compatible = "rockchip,rk808"; ++ reg = <0x1b>; ++ pinctrl-names = "default"; ++ pinctrl-0 = <&pmic_int>, <&pmic_sleep>; ++ interrupt-parent = <&gpio0>; ++ interrupts = <5 IRQ_TYPE_LEVEL_LOW>; ++ rockchip,system-power-controller; ++ vcc1-supply = <&vcc_sys>; ++ vcc2-supply = <&vcc_sys>; ++ vcc3-supply = <&vcc_sys>; ++ vcc4-supply = <&vcc_sys>; ++ vcc6-supply = <&vcc_sys>; ++ vcc7-supply = <&vcc_sys>; ++ vcc8-supply = <&vcc_io>; ++ vcc9-supply = <&vcc_sys>; ++ vcc10-supply = <&vcc_sys>; ++ vcc11-supply = <&vcc_sys>; ++ vcc12-supply = <&vcc_io>; ++ clock-output-names = "xin32k", "rk808-clkout2"; ++ #clock-cells = <1>; ++ ++ regulators { ++ vdd_cpu: DCDC_REG1 { ++ regulator-always-on; ++ regulator-boot-on; ++ regulator-min-microvolt = <700000>; ++ regulator-max-microvolt = <1500000>; ++ regulator-name = "vdd_cpu"; ++ }; ++ ++ vdd_log: DCDC_REG2 { ++ regulator-always-on; ++ regulator-boot-on; ++ regulator-min-microvolt = <700000>; ++ regulator-max-microvolt = <1500000>; ++ regulator-name = "vdd_log"; ++ }; ++ ++ vcc_ddr: DCDC_REG3 { ++ regulator-always-on; ++ regulator-boot-on; ++ regulator-name = "vcc_ddr"; ++ }; ++ ++ vcc_io: DCDC_REG4 { ++ regulator-always-on; ++ regulator-boot-on; ++ regulator-min-microvolt = <3300000>; ++ regulator-max-microvolt = <3300000>; ++ regulator-name = "vcc_io"; ++ }; ++ ++ vcc18_flash: LDO_REG1 { ++ regulator-always-on; ++ regulator-boot-on; ++ regulator-min-microvolt = <1800000>; ++ regulator-max-microvolt = <1800000>; ++ regulator-name = "vcc18_flash"; ++ }; ++ ++ vcc33_lcd: LDO_REG2 { ++ regulator-always-on; ++ regulator-boot-on; ++ regulator-min-microvolt = <3300000>; ++ regulator-max-microvolt = <3300000>; ++ regulator-name = "vcc33_lcd"; ++ }; ++ ++ vdd_10: LDO_REG3 { ++ regulator-always-on; ++ regulator-boot-on; ++ regulator-min-microvolt = <1000000>; ++ regulator-max-microvolt = <1000000>; ++ regulator-name = "vdd_10"; ++ }; ++ ++ vcca_18: LDO_REG4 { ++ regulator-boot-on; ++ regulator-min-microvolt = <1800000>; ++ regulator-max-microvolt = <1800000>; ++ regulator-name = "vcca_18"; ++ }; ++ ++ vccio_sd: LDO_REG5 { ++ regulator-always-on; ++ regulator-boot-on; ++ regulator-min-microvolt = <1800000>; ++ regulator-max-microvolt = <3300000>; ++ regulator-name = "vccio_sd"; ++ }; ++ ++ vdd10_lcd: LDO_REG6 { ++ regulator-always-on; ++ regulator-boot-on; ++ regulator-min-microvolt = <1000000>; ++ regulator-max-microvolt = <1000000>; ++ regulator-name = "vdd10_lcd"; ++ }; ++ ++ vcc_18: LDO_REG7 { ++ regulator-always-on; ++ regulator-boot-on; ++ regulator-min-microvolt = <1800000>; ++ regulator-max-microvolt = <1800000>; ++ regulator-name = "vcc_18"; ++ }; ++ ++ vcc18_lcd: LDO_REG8 { ++ regulator-always-on; ++ regulator-boot-on; ++ regulator-min-microvolt = <1800000>; ++ regulator-max-microvolt = <1800000>; ++ regulator-name = "vcc18_lcd"; ++ }; ++ ++ vcc_sd: SWITCH_REG1 { ++ regulator-always-on; ++ regulator-boot-on; ++ regulator-name = "vcc_sd"; ++ }; ++ ++ vcc_lan: SWITCH_REG2 { ++ regulator-always-on; ++ regulator-boot-on; ++ regulator-name = "vcc_lan"; ++ }; ++ }; ++ }; ++}; ++ ++&pinctrl { ++ ir { ++ ir_int: ir-int { ++ rockchip,pins = <3 30 RK_FUNC_GPIO &pcfg_pull_up>; ++ }; ++ }; ++ ++ keys { ++ pwr_key: pwr-key { ++ rockchip,pins = <0 2 RK_FUNC_GPIO &pcfg_pull_up>; ++ }; ++ }; ++ ++ pmic { ++ pmic_sleep: pmic-sleep { ++ rockchip,pins = <0 0 RK_FUNC_2 &pcfg_pull_none>; ++ }; ++ ++ pmic_int: pmic-int { ++ rockchip,pins = <0 5 RK_FUNC_GPIO &pcfg_pull_up>; ++ }; ++ }; ++}; ++ ++&tsadc { ++ status = "okay"; ++ rockchip,hw-tshut-mode = <0>; /* CRU */ ++ rockchip,hw-tshut-polarity = <0>; /* low */ ++}; ++ ++&uart2 { ++ status = "okay"; ++}; ++ ++&usb_host0_ehci { ++ status = "okay"; ++}; ++ ++&usb_otg { ++ status = "okay"; ++}; ++ ++&wdt { ++ status = "okay"; ++}; +-- +2.5.0 + diff --git a/Initial-AllWinner-A64-and-PINE64-support.patch b/Initial-AllWinner-A64-and-PINE64-support.patch new file mode 100644 index 000000000..d21cbc1ca --- /dev/null +++ b/Initial-AllWinner-A64-and-PINE64-support.patch @@ -0,0 +1,1882 @@ +From 97f002d28e975991226ab70599731bd2ccc8c060 Mon Sep 17 00:00:00 2001 +From: Peter Robinson <pbrobinson@gmail.com> +Date: Sun, 6 Mar 2016 12:06:41 +0000 +Subject: [PATCH] Initial AllWinner A64 and PINE64 support + +--- + Documentation/devicetree/bindings/arm/sunxi.txt | 1 + + Documentation/devicetree/bindings/clock/sunxi.txt | 7 + + .../bindings/pinctrl/allwinner,sunxi-pinctrl.txt | 1 + + .../devicetree/bindings/vendor-prefixes.txt | 1 + + arch/arm/boot/dts/sun8i-h3.dtsi | 18 +- + arch/arm/mach-sunxi/Kconfig | 7 + + arch/arm64/Kconfig.platforms | 6 + + arch/arm64/boot/dts/Makefile | 1 + + arch/arm64/boot/dts/allwinner/Makefile | 5 + + .../dts/allwinner/sun50i-a64-pine64-common.dtsi | 80 +++ + .../boot/dts/allwinner/sun50i-a64-pine64-plus.dts | 59 ++ + .../arm64/boot/dts/allwinner/sun50i-a64-pine64.dts | 58 ++ + arch/arm64/boot/dts/allwinner/sun50i-a64.dtsi | 624 +++++++++++++++++++++ + drivers/clk/sunxi/Makefile | 1 + + drivers/clk/sunxi/clk-factors.c | 3 +- + drivers/clk/sunxi/clk-factors.h | 1 + + drivers/clk/sunxi/clk-multi-gates.c | 105 ++++ + drivers/clk/sunxi/clk-sunxi.c | 4 +- + drivers/crypto/Kconfig | 2 +- + drivers/pinctrl/sunxi/Kconfig | 4 + + drivers/pinctrl/sunxi/Makefile | 1 + + drivers/pinctrl/sunxi/pinctrl-sun50i-a64.c | 602 ++++++++++++++++++++ + drivers/rtc/Kconfig | 7 +- + 23 files changed, 1582 insertions(+), 16 deletions(-) + create mode 100644 arch/arm64/boot/dts/allwinner/Makefile + create mode 100644 arch/arm64/boot/dts/allwinner/sun50i-a64-pine64-common.dtsi + create mode 100644 arch/arm64/boot/dts/allwinner/sun50i-a64-pine64-plus.dts + create mode 100644 arch/arm64/boot/dts/allwinner/sun50i-a64-pine64.dts + create mode 100644 arch/arm64/boot/dts/allwinner/sun50i-a64.dtsi + create mode 100644 drivers/clk/sunxi/clk-multi-gates.c + create mode 100644 drivers/pinctrl/sunxi/pinctrl-sun50i-a64.c + +diff --git a/Documentation/devicetree/bindings/arm/sunxi.txt b/Documentation/devicetree/bindings/arm/sunxi.txt +index bb9b0faa..8b39d2b 100644 +--- a/Documentation/devicetree/bindings/arm/sunxi.txt ++++ b/Documentation/devicetree/bindings/arm/sunxi.txt +@@ -13,3 +13,4 @@ using one of the following compatible strings: + allwinner,sun8i-a33 + allwinner,sun8i-h3 + allwinner,sun9i-a80 ++ allwinner,sun50i-a64 +diff --git a/Documentation/devicetree/bindings/clock/sunxi.txt b/Documentation/devicetree/bindings/clock/sunxi.txt +index e59f57b..8af12b5 100644 +--- a/Documentation/devicetree/bindings/clock/sunxi.txt ++++ b/Documentation/devicetree/bindings/clock/sunxi.txt +@@ -77,6 +77,8 @@ Required properties: + "allwinner,sun9i-a80-usb-mod-clk" - for usb gates + resets on A80 + "allwinner,sun9i-a80-usb-phy-clk" - for usb phy gates + resets on A80 + "allwinner,sun4i-a10-ve-clk" - for the Video Engine clock ++ "allwinner,sunxi-multi-bus-gates-clk" - for the multi-parent bus gates ++ "allwinner,sun50i-a64-bus-gates-clk" - for the bus gates on A64 + + Required properties for all clocks: + - reg : shall be the control register address for the clock. +@@ -117,6 +119,11 @@ For "allwinner,sun6i-a31-pll6-clk", there are 2 outputs. The first output + is the normal PLL6 output, or "pll6". The second output is rate doubled + PLL6, or "pll6x2". + ++The "allwinner,sunxi-multi-bus-gates-clk" holds the actual clocks in ++child nodes, where each one specifies the parent clock that the particular ++gates are depending from. The child nodes each follow the common clock ++binding as described in this document. ++ + The "allwinner,*-mmc-clk" clocks have three different outputs: the + main clock, with the ID 0, and the output and sample clocks, with the + IDs 1 and 2, respectively. +diff --git a/Documentation/devicetree/bindings/pinctrl/allwinner,sunxi-pinctrl.txt b/Documentation/devicetree/bindings/pinctrl/allwinner,sunxi-pinctrl.txt +index 9213b27..08b2361 100644 +--- a/Documentation/devicetree/bindings/pinctrl/allwinner,sunxi-pinctrl.txt ++++ b/Documentation/devicetree/bindings/pinctrl/allwinner,sunxi-pinctrl.txt +@@ -21,6 +21,7 @@ Required properties: + "allwinner,sun9i-a80-r-pinctrl" + "allwinner,sun8i-a83t-pinctrl" + "allwinner,sun8i-h3-pinctrl" ++ "allwinner,sun50i-a64-pinctrl" + + - reg: Should contain the register physical address and length for the + pin controller. +diff --git a/Documentation/devicetree/bindings/vendor-prefixes.txt b/Documentation/devicetree/bindings/vendor-prefixes.txt +index 72e2c5a..0c22fa9 100644 +--- a/Documentation/devicetree/bindings/vendor-prefixes.txt ++++ b/Documentation/devicetree/bindings/vendor-prefixes.txt +@@ -175,6 +175,7 @@ parade Parade Technologies Inc. + pericom Pericom Technology Inc. + phytec PHYTEC Messtechnik GmbH + picochip Picochip Ltd ++pine64 Pine64 + plathome Plat'Home Co., Ltd. + plda PLDA + pixcir PIXCIR MICROELECTRONICS Co., Ltd +diff --git a/arch/arm/boot/dts/sun8i-h3.dtsi b/arch/arm/boot/dts/sun8i-h3.dtsi +index 1524130e..7c50fa0 100644 +--- a/arch/arm/boot/dts/sun8i-h3.dtsi ++++ b/arch/arm/boot/dts/sun8i-h3.dtsi +@@ -137,12 +137,12 @@ + clock-output-names = "pll6d2"; + }; + +- /* dummy clock until pll6 can be reused */ +- pll8: pll8_clk { +- #clock-cells = <0>; +- compatible = "fixed-clock"; +- clock-frequency = <1>; +- clock-output-names = "pll8"; ++ pll8: clk@c01c20044 { ++ #clock-cells = <1>; ++ compatible = "allwinner,sun6i-a31-pll6-clk"; ++ reg = <0x01c20044 0x4>; ++ clocks = <&osc24M>; ++ clock-output-names = "pll8", "pll8x2"; + }; + + cpu: cpu_clk@01c20050 { +@@ -243,7 +243,7 @@ + #clock-cells = <1>; + compatible = "allwinner,sun4i-a10-mmc-clk"; + reg = <0x01c20088 0x4>; +- clocks = <&osc24M>, <&pll6 0>, <&pll8>; ++ clocks = <&osc24M>, <&pll6 0>, <&pll8 0>; + clock-output-names = "mmc0", + "mmc0_output", + "mmc0_sample"; +@@ -253,7 +253,7 @@ + #clock-cells = <1>; + compatible = "allwinner,sun4i-a10-mmc-clk"; + reg = <0x01c2008c 0x4>; +- clocks = <&osc24M>, <&pll6 0>, <&pll8>; ++ clocks = <&osc24M>, <&pll6 0>, <&pll8 0>; + clock-output-names = "mmc1", + "mmc1_output", + "mmc1_sample"; +@@ -263,7 +263,7 @@ + #clock-cells = <1>; + compatible = "allwinner,sun4i-a10-mmc-clk"; + reg = <0x01c20090 0x4>; +- clocks = <&osc24M>, <&pll6 0>, <&pll8>; ++ clocks = <&osc24M>, <&pll6 0>, <&pll8 0>; + clock-output-names = "mmc2", + "mmc2_output", + "mmc2_sample"; +diff --git a/arch/arm/mach-sunxi/Kconfig b/arch/arm/mach-sunxi/Kconfig +index c124d65..b305f5b 100644 +--- a/arch/arm/mach-sunxi/Kconfig ++++ b/arch/arm/mach-sunxi/Kconfig +@@ -46,4 +46,11 @@ config MACH_SUN9I + default ARCH_SUNXI + select ARM_GIC + ++config MACH_SUN50I ++ bool "Allwinner A64 (sun50i) SoCs support" ++ default ARCH_SUNXI ++ select ARM_GIC ++ select HAVE_ARM_ARCH_TIMER ++ select PINCTRL_SUN50I_A64 ++ + endif +diff --git a/arch/arm64/Kconfig.platforms b/arch/arm64/Kconfig.platforms +index 21074f6..63a690d 100644 +--- a/arch/arm64/Kconfig.platforms ++++ b/arch/arm64/Kconfig.platforms +@@ -72,6 +72,12 @@ config ARCH_SEATTLE + config ARCH_SHMOBILE + bool + ++config ARCH_SUNXI ++ bool "Allwinner sunxi 64-bit SoC Family" ++ select PINCTRL_SUN50I_A64 ++ help ++ This enables support for Allwinner sunxi based SoCs like the A64. ++ + config ARCH_RENESAS + bool "Renesas SoC Platforms" + select ARCH_SHMOBILE +diff --git a/arch/arm64/boot/dts/Makefile b/arch/arm64/boot/dts/Makefile +index f832b8a..3b7428a 100644 +--- a/arch/arm64/boot/dts/Makefile ++++ b/arch/arm64/boot/dts/Makefile +@@ -1,3 +1,4 @@ ++dts-dirs += allwinner + dts-dirs += altera + dts-dirs += amd + dts-dirs += apm +diff --git a/arch/arm64/boot/dts/allwinner/Makefile b/arch/arm64/boot/dts/allwinner/Makefile +new file mode 100644 +index 0000000..1e29a5a +--- /dev/null ++++ b/arch/arm64/boot/dts/allwinner/Makefile +@@ -0,0 +1,5 @@ ++dtb-$(CONFIG_ARCH_SUNXI) += sun50i-a64-pine64-plus.dtb sun50i-a64-pine64.dtb ++ ++always := $(dtb-y) ++subdir-y := $(dts-dirs) ++clean-files := *.dtb +diff --git a/arch/arm64/boot/dts/allwinner/sun50i-a64-pine64-common.dtsi b/arch/arm64/boot/dts/allwinner/sun50i-a64-pine64-common.dtsi +new file mode 100644 +index 0000000..d5a7249 +--- /dev/null ++++ b/arch/arm64/boot/dts/allwinner/sun50i-a64-pine64-common.dtsi +@@ -0,0 +1,80 @@ ++/* ++ * Copyright (c) 2016 ARM Ltd. ++ * ++ * This file is dual-licensed: you can use it either under the terms ++ * of the GPL or the X11 license, at your option. Note that this dual ++ * licensing only applies to this file, and not this project as a ++ * whole. ++ * ++ * a) This library is free software; you can redistribute it and/or ++ * modify it under the terms of the GNU General Public License as ++ * published by the Free Software Foundation; either version 2 of the ++ * License, or (at your option) any later version. ++ * ++ * This library is distributed in the hope that it will be useful, ++ * but WITHOUT ANY WARRANTY; without even the implied warranty of ++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the ++ * GNU General Public License for more details. ++ * ++ * Or, alternatively, ++ * ++ * b) Permission is hereby granted, free of charge, to any person ++ * obtaining a copy of this software and associated documentation ++ * files (the "Software"), to deal in the Software without ++ * restriction, including without limitation the rights to use, ++ * copy, modify, merge, publish, distribute, sublicense, and/or ++ * sell copies of the Software, and to permit persons to whom the ++ * Software is furnished to do so, subject to the following ++ * conditions: ++ * ++ * The above copyright notice and this permission notice shall be ++ * included in all copies or substantial portions of the Software. ++ * ++ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, ++ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES ++ * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND ++ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT ++ * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, ++ * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING ++ * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR ++ * OTHER DEALINGS IN THE SOFTWARE. ++ */ ++ ++#include "sun50i-a64.dtsi" ++ ++/ { ++ ++ aliases { ++ serial0 = &uart0; ++ }; ++ ++ soc { ++ reg_vcc3v3: vcc3v3 { ++ compatible = "regulator-fixed"; ++ regulator-name = "vcc3v3"; ++ regulator-min-microvolt = <3300000>; ++ regulator-max-microvolt = <3300000>; ++ }; ++ }; ++}; ++ ++&mmc0 { ++ pinctrl-names = "default"; ++ pinctrl-0 = <&mmc0_pins>, <&mmc0_default_cd_pin>; ++ vmmc-supply = <®_vcc3v3>; ++ cd-gpios = <&pio 5 6 0>; ++ cd-inverted; ++ status = "okay"; ++}; ++ ++&uart0 { ++ pinctrl-names = "default"; ++ pinctrl-0 = <&uart0_pins_a>; ++ status = "okay"; ++}; ++ ++&i2c1 { ++ pinctrl-names = "default"; ++ pinctrl-0 = <&i2c1_pins>; ++ status = "okay"; ++}; +diff --git a/arch/arm64/boot/dts/allwinner/sun50i-a64-pine64-plus.dts b/arch/arm64/boot/dts/allwinner/sun50i-a64-pine64-plus.dts +new file mode 100644 +index 0000000..549dc15 +--- /dev/null ++++ b/arch/arm64/boot/dts/allwinner/sun50i-a64-pine64-plus.dts +@@ -0,0 +1,59 @@ ++/* ++ * Copyright (c) 2016 ARM Ltd. ++ * ++ * This file is dual-licensed: you can use it either under the terms ++ * of the GPL or the X11 license, at your option. Note that this dual ++ * licensing only applies to this file, and not this project as a ++ * whole. ++ * ++ * a) This library is free software; you can redistribute it and/or ++ * modify it under the terms of the GNU General Public License as ++ * published by the Free Software Foundation; either version 2 of the ++ * License, or (at your option) any later version. ++ * ++ * This library is distributed in the hope that it will be useful, ++ * but WITHOUT ANY WARRANTY; without even the implied warranty of ++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the ++ * GNU General Public License for more details. ++ * ++ * Or, alternatively, ++ * ++ * b) Permission is hereby granted, free of charge, to any person ++ * obtaining a copy of this software and associated documentation ++ * files (the "Software"), to deal in the Software without ++ * restriction, including without limitation the rights to use, ++ * copy, modify, merge, publish, distribute, sublicense, and/or ++ * sell copies of the Software, and to permit persons to whom the ++ * Software is furnished to do so, subject to the following ++ * conditions: ++ * ++ * The above copyright notice and this permission notice shall be ++ * included in all copies or substantial portions of the Software. ++ * ++ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, ++ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES ++ * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND ++ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT ++ * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, ++ * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING ++ * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR ++ * OTHER DEALINGS IN THE SOFTWARE. ++ */ ++ ++/dts-v1/; ++ ++#include "sun50i-a64-pine64-common.dtsi" ++ ++/ { ++ model = "Pine64+"; ++ compatible = "pine64,pine64-plus", "allwinner,sun50i-a64"; ++ ++ chosen { ++ stdout-path = "serial0:115200n8"; ++ }; ++ ++ /* There is a model with 2GB of DRAM, but U-Boot fixes this for us. */ ++ memory { ++ reg = <0x40000000 0x40000000>; ++ }; ++}; +diff --git a/arch/arm64/boot/dts/allwinner/sun50i-a64-pine64.dts b/arch/arm64/boot/dts/allwinner/sun50i-a64-pine64.dts +new file mode 100644 +index 0000000..ebe029e +--- /dev/null ++++ b/arch/arm64/boot/dts/allwinner/sun50i-a64-pine64.dts +@@ -0,0 +1,58 @@ ++/* ++ * Copyright (c) 2016 ARM Ltd. ++ * ++ * This file is dual-licensed: you can use it either under the terms ++ * of the GPL or the X11 license, at your option. Note that this dual ++ * licensing only applies to this file, and not this project as a ++ * whole. ++ * ++ * a) This library is free software; you can redistribute it and/or ++ * modify it under the terms of the GNU General Public License as ++ * published by the Free Software Foundation; either version 2 of the ++ * License, or (at your option) any later version. ++ * ++ * This library is distributed in the hope that it will be useful, ++ * but WITHOUT ANY WARRANTY; without even the implied warranty of ++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the ++ * GNU General Public License for more details. ++ * ++ * Or, alternatively, ++ * ++ * b) Permission is hereby granted, free of charge, to any person ++ * obtaining a copy of this software and associated documentation ++ * files (the "Software"), to deal in the Software without ++ * restriction, including without limitation the rights to use, ++ * copy, modify, merge, publish, distribute, sublicense, and/or ++ * sell copies of the Software, and to permit persons to whom the ++ * Software is furnished to do so, subject to the following ++ * conditions: ++ * ++ * The above copyright notice and this permission notice shall be ++ * included in all copies or substantial portions of the Software. ++ * ++ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, ++ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES ++ * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND ++ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT ++ * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, ++ * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING ++ * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR ++ * OTHER DEALINGS IN THE SOFTWARE. ++ */ ++ ++/dts-v1/; ++ ++#include "sun50i-a64-pine64-common.dtsi" ++ ++/ { ++ model = "Pine64"; ++ compatible = "pine64,pine64", "allwinner,sun50i-a64"; ++ ++ chosen { ++ stdout-path = "serial0:115200n8"; ++ }; ++ ++ memory { ++ reg = <0x40000000 0x20000000>; ++ }; ++}; +diff --git a/arch/arm64/boot/dts/allwinner/sun50i-a64.dtsi b/arch/arm64/boot/dts/allwinner/sun50i-a64.dtsi +new file mode 100644 +index 0000000..1bd436f +--- /dev/null ++++ b/arch/arm64/boot/dts/allwinner/sun50i-a64.dtsi +@@ -0,0 +1,624 @@ ++/* ++ * Copyright (C) 2016 ARM Ltd. ++ * based on the Allwinner H3 dtsi: ++ * Copyright (C) 2015 Jens Kuske <jenskuske@gmail.com> ++ * ++ * This file is dual-licensed: you can use it either under the terms ++ * of the GPL or the X11 license, at your option. Note that this dual ++ * licensing only applies to this file, and not this project as a ++ * whole. ++ * ++ * a) This file is free software; you can redistribute it and/or ++ * modify it under the terms of the GNU General Public License as ++ * published by the Free Software Foundation; either version 2 of the ++ * License, or (at your option) any later version. ++ * ++ * This file is distributed in the hope that it will be useful, ++ * but WITHOUT ANY WARRANTY; without even the implied warranty of ++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the ++ * GNU General Public License for more details. ++ * ++ * Or, alternatively, ++ * ++ * b) Permission is hereby granted, free of charge, to any person ++ * obtaining a copy of this software and associated documentation ++ * files (the "Software"), to deal in the Software without ++ * restriction, including without limitation the rights to use, ++ * copy, modify, merge, publish, distribute, sublicense, and/or ++ * sell copies of the Software, and to permit persons to whom the ++ * Software is furnished to do so, subject to the following ++ * conditions: ++ * ++ * The above copyright notice and this permission notice shall be ++ * included in all copies or substantial portions of the Software. ++ * ++ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, ++ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES ++ * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND ++ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT ++ * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, ++ * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING ++ * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR ++ * OTHER DEALINGS IN THE SOFTWARE. ++ */ ++ ++#include <dt-bindings/interrupt-controller/arm-gic.h> ++#include <dt-bindings/pinctrl/sun4i-a10.h> ++ ++/ { ++ interrupt-parent = <&gic>; ++ #address-cells = <1>; ++ #size-cells = <1>; ++ ++ cpus { ++ #address-cells = <1>; ++ #size-cells = <0>; ++ ++ cpu@0 { ++ compatible = "arm,cortex-a53", "arm,armv8"; ++ device_type = "cpu"; ++ reg = <0>; ++ enable-method = "psci"; ++ }; ++ ++ cpu@1 { ++ compatible = "arm,cortex-a53", "arm,armv8"; ++ device_type = "cpu"; ++ reg = <1>; ++ enable-method = "psci"; ++ }; ++ ++ cpu@2 { ++ compatible = "arm,cortex-a53", "arm,armv8"; ++ device_type = "cpu"; ++ reg = <2>; ++ enable-method = "psci"; ++ }; ++ ++ cpu@3 { ++ compatible = "arm,cortex-a53", "arm,armv8"; ++ device_type = "cpu"; ++ reg = <3>; ++ enable-method = "psci"; ++ }; ++ }; ++ ++ psci { ++ compatible = "arm,psci-0.2"; ++ method = "smc"; ++ }; ++ ++ memory { ++ device_type = "memory"; ++ reg = <0x40000000 0>; ++ }; ++ ++ gic: interrupt-controller@1c81000 { ++ compatible = "arm,gic-400"; ++ interrupt-controller; ++ #interrupt-cells = <3>; ++ #address-cells = <0>; ++ ++ reg = <0x01c81000 0x1000>, ++ <0x01c82000 0x2000>, ++ <0x01c84000 0x2000>, ++ <0x01c86000 0x2000>; ++ interrupts = <GIC_PPI 9 ++ (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>; ++ }; ++ ++ timer { ++ compatible = "arm,armv8-timer"; ++ interrupts = <GIC_PPI 13 ++ (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>, ++ <GIC_PPI 14 ++ (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>, ++ <GIC_PPI 11 ++ (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>, ++ <GIC_PPI 10 ++ (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>; ++ }; ++ ++ clocks { ++ #address-cells = <1>; ++ #size-cells = <1>; ++ ranges; ++ ++ osc24M: osc24M_clk { ++ #clock-cells = <0>; ++ compatible = "fixed-clock"; ++ clock-frequency = <24000000>; ++ clock-output-names = "osc24M"; ++ }; ++ ++ osc32k: osc32k_clk { ++ #clock-cells = <0>; ++ compatible = "fixed-clock"; ++ clock-frequency = <32768>; ++ clock-output-names = "osc32k"; ++ }; ++ ++ pll1: pll1_clk@1c20000 { ++ #clock-cells = <0>; ++ compatible = "allwinner,sun8i-a23-pll1-clk"; ++ reg = <0x01c20000 0x4>; ++ clocks = <&osc24M>; ++ clock-output-names = "pll1"; ++ }; ++ ++ pll6: pll6_clk@1c20028 { ++ #clock-cells = <1>; ++ compatible = "allwinner,sun6i-a31-pll6-clk"; ++ reg = <0x01c20028 0x4>; ++ clocks = <&osc24M>; ++ clock-output-names = "pll6", "pll6x2"; ++ }; ++ ++ pll6d2: pll6d2_clk { ++ #clock-cells = <0>; ++ compatible = "fixed-factor-clock"; ++ clock-div = <2>; ++ clock-mult = <1>; ++ clocks = <&pll6 0>; ++ clock-output-names = "pll6d2"; ++ }; ++ ++ pll7: pll7_clk@1c2002c { ++ #clock-cells = <1>; ++ compatible = "allwinner,sun6i-a31-pll6-clk"; ++ reg = <0x01c2002c 0x4>; ++ clocks = <&osc24M>; ++ clock-output-names = "pll7", "pll7x2"; ++ }; ++ ++ cpu: cpu_clk@1c20050 { ++ #clock-cells = <0>; ++ compatible = "allwinner,sun4i-a10-cpu-clk"; ++ reg = <0x01c20050 0x4>; ++ clocks = <&osc32k>, <&osc24M>, <&pll1>, <&pll1>; ++ clock-output-names = "cpu"; ++ critical-clocks = <0>; ++ }; ++ ++ axi: axi_clk@1c20050 { ++ #clock-cells = <0>; ++ compatible = "allwinner,sun4i-a10-axi-clk"; ++ reg = <0x01c20050 0x4>; ++ clocks = <&cpu>; ++ clock-output-names = "axi"; ++ }; ++ ++ ahb1: ahb1_clk@1c20054 { ++ #clock-cells = <0>; ++ compatible = "allwinner,sun6i-a31-ahb1-clk"; ++ reg = <0x01c20054 0x4>; ++ clocks = <&osc32k>, <&osc24M>, <&axi>, <&pll6 0>; ++ clock-output-names = "ahb1"; ++ }; ++ ++ ahb2: ahb2_clk@1c2005c { ++ #clock-cells = <0>; ++ compatible = "allwinner,sun8i-h3-ahb2-clk"; ++ reg = <0x01c2005c 0x4>; ++ clocks = <&ahb1>, <&pll6d2>; ++ clock-output-names = "ahb2"; ++ }; ++ ++ apb1: apb1_clk@1c20054 { ++ #clock-cells = <0>; ++ compatible = "allwinner,sun4i-a10-apb0-clk"; ++ reg = <0x01c20054 0x4>; ++ clocks = <&ahb1>; ++ clock-output-names = "apb1"; ++ }; ++ ++ apb2: apb2_clk@1c20058 { ++ #clock-cells = <0>; ++ compatible = "allwinner,sun4i-a10-apb1-clk"; ++ reg = <0x01c20058 0x4>; ++ clocks = <&osc32k>, <&osc24M>, <&pll6 1>, <&pll6 1>; ++ clock-output-names = "apb2"; ++ }; ++ ++ bus_gates: bus_gates_clk@1c20060 { ++ #clock-cells = <1>; ++ compatible = "allwinner,sun50i-a64-bus-gates-clk", ++ "allwinner,sunxi-multi-bus-gates-clk"; ++ reg = <0x01c20060 0x14>; ++ ahb1_parent { ++ clocks = <&ahb1>; ++ clock-indices = <1>, <5>, ++ <6>, <8>, ++ <9>, <10>, ++ <13>, <14>, ++ <18>, <19>, ++ <20>, <21>, ++ <23>, <24>, ++ <25>, <28>, ++ <32>, <35>, ++ <36>, <37>, ++ <40>, <43>, ++ <44>, <52>, ++ <53>, <54>, ++ <135>; ++ clock-output-names = "bus_mipidsi", "bus_ce", ++ "bus_dma", "bus_mmc0", ++ "bus_mmc1", "bus_mmc2", ++ "bus_nand", "bus_sdram", ++ "bus_ts", "bus_hstimer", ++ "bus_spi0", "bus_spi1", ++ "bus_otg", "bus_otg_ehci0", ++ "bus_ehci0", "bus_otg_ohci0", ++ "bus_ve", "bus_lcd0", ++ "bus_lcd1", "bus_deint", ++ "bus_csi", "bus_hdmi", ++ "bus_de", "bus_gpu", ++ "bus_msgbox", "bus_spinlock", ++ "bus_dbg"; ++ }; ++ ahb2_parent { ++ clocks = <&ahb2>; ++ clock-indices = <17>, <29>; ++ clock-output-names = "bus_gmac", "bus_ohci0"; ++ }; ++ apb1_parent { ++ clocks = <&apb1>; ++ clock-indices = <64>, <65>, ++ <69>, <72>, ++ <76>, <77>, ++ <78>; ++ clock-output-names = "bus_codec", "bus_spdif", ++ "bus_pio", "bus_ths", ++ "bus_i2s0", "bus_i2s1", ++ "bus_i2s2"; ++ }; ++ abp2_parent { ++ clocks = <&apb2>; ++ clock-indices = <96>, <97>, ++ <98>, <101>, ++ <112>, <113>, ++ <114>, <115>, ++ <116>; ++ clock-output-names = "bus_i2c0", "bus_i2c1", ++ "bus_i2c2", "bus_scr", ++ "bus_uart0", "bus_uart1", ++ "bus_uart2", "bus_uart3", ++ "bus_uart4"; ++ }; ++ }; ++ ++ mmc0_clk: mmc0_clk@1c20088 { ++ #clock-cells = <0>; ++ compatible = "allwinner,sun4i-a10-mod0-clk"; ++ reg = <0x01c20088 0x4>; ++ clocks = <&osc24M>, <&pll6 1>, <&pll7 1>; ++ clock-output-names = "mmc0"; ++ }; ++ ++ mmc1_clk: mmc1_clk@1c2008c { ++ #clock-cells = <0>; ++ compatible = "allwinner,sun4i-a10-mod0-clk"; ++ reg = <0x01c2008c 0x4>; ++ clocks = <&osc24M>, <&pll6 1>, <&pll7 1>; ++ clock-output-names = "mmc1"; ++ }; ++ ++ mmc2_clk: mmc2_clk@1c20090 { ++ #clock-cells = <0>; ++ compatible = "allwinner,sun4i-a10-mod0-clk"; ++ reg = <0x01c20090 0x4>; ++ clocks = <&osc24M>, <&pll6 1>, <&pll7 1>; ++ clock-output-names = "mmc2"; ++ }; ++ }; ++ ++ soc { ++ compatible = "simple-bus"; ++ #address-cells = <1>; ++ #size-cells = <1>; ++ ranges; ++ ++ mmc0: mmc@1c0f000 { ++ compatible = "allwinner,sun50i-a64-mmc", ++ "allwinner,sun5i-a13-mmc"; ++ reg = <0x01c0f000 0x1000>; ++ clocks = <&bus_gates 8>, <&mmc0_clk>, ++ <&mmc0_clk>, <&mmc0_clk>; ++ clock-names = "ahb", "mmc", ++ "output", "sample"; ++ resets = <&ahb_rst 8>; ++ reset-names = "ahb"; ++ interrupts = <GIC_SPI 60 IRQ_TYPE_LEVEL_HIGH>; ++ status = "disabled"; ++ #address-cells = <1>; ++ #size-cells = <0>; ++ }; ++ ++ mmc1: mmc@1c10000 { ++ compatible = "allwinner,sun50i-a64-mmc", ++ "allwinner,sun5i-a13-mmc"; ++ reg = <0x01c10000 0x1000>; ++ clocks = <&bus_gates 9>, <&mmc1_clk>, ++ <&mmc1_clk>, <&mmc1_clk>; ++ clock-names = "ahb", "mmc", ++ "output", "sample"; ++ resets = <&ahb_rst 9>; ++ reset-names = "ahb"; ++ interrupts = <GIC_SPI 61 IRQ_TYPE_LEVEL_HIGH>; ++ status = "disabled"; ++ #address-cells = <1>; ++ #size-cells = <0>; ++ }; ++ ++ mmc2: mmc@1c11000 { ++ compatible = "allwinner,sun50i-a64-mmc", ++ "allwinner,sun5i-a13-mmc"; ++ reg = <0x01c11000 0x1000>; ++ clocks = <&bus_gates 10>, <&mmc2_clk>, ++ <&mmc2_clk>, <&mmc2_clk>; ++ clock-names = "ahb", "mmc", ++ "output", "sample"; ++ resets = <&ahb_rst 10>; ++ reset-names = "ahb"; ++ interrupts = <GIC_SPI 62 IRQ_TYPE_LEVEL_HIGH>; ++ status = "disabled"; ++ #address-cells = <1>; ++ #size-cells = <0>; ++ }; ++ ++ pio: pinctrl@1c20800 { ++ compatible = "allwinner,sun50i-a64-pinctrl"; ++ reg = <0x01c20800 0x400>; ++ interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>, ++ <GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>, ++ <GIC_SPI 21 IRQ_TYPE_LEVEL_HIGH>; ++ clocks = <&bus_gates 69>; ++ gpio-controller; ++ #gpio-cells = <3>; ++ interrupt-controller; ++ #interrupt-cells = <2>; ++ ++ uart0_pins_a: uart0@0 { ++ allwinner,pins = "PB8", "PB9"; ++ allwinner,function = "uart0"; ++ allwinner,drive = <SUN4I_PINCTRL_10_MA>; ++ allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; ++ }; ++ ++ uart0_pins_b: uart0@1 { ++ allwinner,pins = "PF2", "PF3"; ++ allwinner,function = "uart0"; ++ allwinner,drive = <SUN4I_PINCTRL_10_MA>; ++ allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; ++ }; ++ ++ uart1_2pins: uart1_2@0 { ++ allwinner,pins = "PG6", "PG7"; ++ allwinner,function = "uart1"; ++ allwinner,drive = <SUN4I_PINCTRL_10_MA>; ++ allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; ++ }; ++ ++ uart1_4pins: uart1_4@0 { ++ allwinner,pins = "PG6", "PG7", "PG8", "PG9"; ++ allwinner,function = "uart1"; ++ allwinner,drive = <SUN4I_PINCTRL_10_MA>; ++ allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; ++ }; ++ ++ uart2_2pins: uart2_2@0 { ++ allwinner,pins = "PB0", "PB1"; ++ allwinner,function = "uart2"; ++ allwinner,drive = <SUN4I_PINCTRL_10_MA>; ++ allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; ++ }; ++ ++ uart2_4pins: uart2_4@0 { ++ allwinner,pins = "PB0", "PB1", "PB2", "PB3"; ++ allwinner,function = "uart2"; ++ allwinner,drive = <SUN4I_PINCTRL_10_MA>; ++ allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; ++ }; ++ ++ uart3_pins_a: uart3@0 { ++ allwinner,pins = "PD0", "PD1"; ++ allwinner,function = "uart3"; ++ allwinner,drive = <SUN4I_PINCTRL_10_MA>; ++ allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; ++ }; ++ ++ uart3_2pins_b: uart3_2@1 { ++ allwinner,pins = "PH4", "PH5"; ++ allwinner,function = "uart3"; ++ allwinner,drive = <SUN4I_PINCTRL_10_MA>; ++ allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; ++ }; ++ ++ uart3_4pins_b: uart3_4@1 { ++ allwinner,pins = "PH4", "PH5", "PH6", "PH7"; ++ allwinner,function = "uart3"; ++ allwinner,drive = <SUN4I_PINCTRL_10_MA>; ++ allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; ++ }; ++ ++ uart4_2pins: uart4_2@0 { ++ allwinner,pins = "PD2", "PD3"; ++ allwinner,function = "uart4"; ++ allwinner,drive = <SUN4I_PINCTRL_10_MA>; ++ allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; ++ }; ++ ++ uart4_4pins: uart4_4@0 { ++ allwinner,pins = "PD2", "PD3", "PD4", "PD5"; ++ allwinner,function = "uart4"; ++ allwinner,drive = <SUN4I_PINCTRL_10_MA>; ++ allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; ++ }; ++ ++ mmc0_pins: mmc0@0 { ++ allwinner,pins = "PF0", "PF1", "PF2", "PF3", ++ "PF4", "PF5"; ++ allwinner,function = "mmc0"; ++ allwinner,drive = <SUN4I_PINCTRL_30_MA>; ++ allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; ++ }; ++ ++ mmc0_default_cd_pin: mmc0_cd_pin@0 { ++ allwinner,pins = "PF6"; ++ allwinner,function = "gpio_in"; ++ allwinner,drive = <SUN4I_PINCTRL_10_MA>; ++ allwinner,pull = <SUN4I_PINCTRL_PULL_UP>; ++ }; ++ ++ mmc1_pins: mmc1@0 { ++ allwinner,pins = "PG0", "PG1", "PG2", "PG3", ++ "PG4", "PG5"; ++ allwinner,function = "mmc1"; ++ allwinner,drive = <SUN4I_PINCTRL_30_MA>; ++ allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; ++ }; ++ ++ mmc2_pins: mmc2@0 { ++ allwinner,pins = "PC1", "PC5", "PC6", "PC8", ++ "PC9", "PC10"; ++ allwinner,function = "mmc2"; ++ allwinner,drive = <SUN4I_PINCTRL_30_MA>; ++ allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; ++ }; ++ ++ i2c0_pins: i2c0_pins { ++ allwinner,pins = "PH0", "PH1"; ++ allwinner,function = "i2c0"; ++ allwinner,drive = <SUN4I_PINCTRL_10_MA>; ++ allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; ++ }; ++ ++ i2c1_pins: i2c1_pins { ++ allwinner,pins = "PH2", "PH3"; ++ allwinner,function = "i2c1"; ++ allwinner,drive = <SUN4I_PINCTRL_10_MA>; ++ allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; ++ }; ++ ++ i2c2_pins: i2c2_pins { ++ allwinner,pins = "PE14", "PE15"; ++ allwinner,function = "i2c2"; ++ allwinner,drive = <SUN4I_PINCTRL_10_MA>; ++ allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; ++ }; ++ }; ++ ++ ahb_rst: reset@1c202c0 { ++ #reset-cells = <1>; ++ compatible = "allwinner,sun6i-a31-clock-reset"; ++ reg = <0x01c202c0 0xc>; ++ }; ++ ++ apb1_rst: reset@1c202d0 { ++ #reset-cells = <1>; ++ compatible = "allwinner,sun6i-a31-clock-reset"; ++ reg = <0x01c202d0 0x4>; ++ }; ++ ++ apb2_rst: reset@1c202d8 { ++ #reset-cells = <1>; ++ compatible = "allwinner,sun6i-a31-clock-reset"; ++ reg = <0x01c202d8 0x4>; ++ }; ++ ++ uart0: serial@1c28000 { ++ compatible = "snps,dw-apb-uart"; ++ reg = <0x01c28000 0x400>; ++ interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>; ++ reg-shift = <2>; ++ reg-io-width = <4>; ++ clocks = <&bus_gates 112>; ++ resets = <&apb2_rst 16>; ++ status = "disabled"; ++ }; ++ ++ uart1: serial@1c28400 { ++ compatible = "snps,dw-apb-uart"; ++ reg = <0x01c28400 0x400>; ++ interrupts = <GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>; ++ reg-shift = <2>; ++ reg-io-width = <4>; ++ clocks = <&bus_gates 113>; ++ resets = <&apb2_rst 17>; ++ status = "disabled"; ++ }; ++ ++ uart2: serial@1c28800 { ++ compatible = "snps,dw-apb-uart"; ++ reg = <0x01c28800 0x400>; ++ interrupts = <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>; ++ reg-shift = <2>; ++ reg-io-width = <4>; ++ clocks = <&bus_gates 114>; ++ resets = <&apb2_rst 18>; ++ status = "disabled"; ++ }; ++ ++ uart3: serial@1c28c00 { ++ compatible = "snps,dw-apb-uart"; ++ reg = <0x01c28c00 0x400>; ++ interrupts = <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>; ++ reg-shift = <2>; ++ reg-io-width = <4>; ++ clocks = <&bus_gates 115>; ++ resets = <&apb2_rst 19>; ++ status = "disabled"; ++ }; ++ ++ uart4: serial@1c29000 { ++ compatible = "snps,dw-apb-uart"; ++ reg = <0x01c29000 0x400>; ++ interrupts = <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>; ++ reg-shift = <2>; ++ reg-io-width = <4>; ++ clocks = <&bus_gates 116>; ++ resets = <&apb2_rst 20>; ++ status = "disabled"; ++ }; ++ ++ rtc: rtc@1f00000 { ++ compatible = "allwinner,sun6i-a31-rtc"; ++ reg = <0x01f00000 0x54>; ++ interrupts = <GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>, ++ <GIC_SPI 41 IRQ_TYPE_LEVEL_HIGH>; ++ }; ++ ++ i2c0: i2c@1c2ac00 { ++ compatible = "allwinner,sun6i-a31-i2c"; ++ reg = <0x01c2ac00 0x400>; ++ interrupts = <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>; ++ clocks = <&bus_gates 96>; ++ resets = <&apb2_rst 0>; ++ status = "disabled"; ++ #address-cells = <1>; ++ #size-cells = <0>; ++ }; ++ ++ i2c1: i2c@1c2b000 { ++ compatible = "allwinner,sun6i-a31-i2c"; ++ reg = <0x01c2b000 0x400>; ++ interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>; ++ clocks = <&bus_gates 97>; ++ resets = <&apb2_rst 1>; ++ status = "disabled"; ++ #address-cells = <1>; ++ #size-cells = <0>; ++ }; ++ ++ i2c2: i2c@1c2b400 { ++ compatible = "allwinner,sun6i-a31-i2c"; ++ reg = <0x01c2b400 0x400>; ++ interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>; ++ clocks = <&bus_gates 98>; ++ resets = <&apb2_rst 2>; ++ status = "disabled"; ++ #address-cells = <1>; ++ #size-cells = <0>; ++ }; ++ }; ++}; +diff --git a/drivers/clk/sunxi/Makefile b/drivers/clk/sunxi/Makefile +index 3fd7901..3a9dc31 100644 +--- a/drivers/clk/sunxi/Makefile ++++ b/drivers/clk/sunxi/Makefile +@@ -11,6 +11,7 @@ obj-y += clk-a10-ve.o + obj-y += clk-a20-gmac.o + obj-y += clk-mod0.o + obj-y += clk-simple-gates.o ++obj-y += clk-multi-gates.o + obj-y += clk-sun8i-bus-gates.o + obj-y += clk-sun8i-mbus.o + obj-y += clk-sun9i-core.o +diff --git a/drivers/clk/sunxi/clk-factors.c b/drivers/clk/sunxi/clk-factors.c +index 59428db..607ba53 100644 +--- a/drivers/clk/sunxi/clk-factors.c ++++ b/drivers/clk/sunxi/clk-factors.c +@@ -184,7 +184,8 @@ struct clk *sunxi_factors_register(struct device_node *node, + if (data->name) + clk_name = data->name; + else +- of_property_read_string(node, "clock-output-names", &clk_name); ++ of_property_read_string_index(node, "clock-output-names", ++ data->name_idx, &clk_name); + + factors = kzalloc(sizeof(struct clk_factors), GFP_KERNEL); + if (!factors) +diff --git a/drivers/clk/sunxi/clk-factors.h b/drivers/clk/sunxi/clk-factors.h +index 171085a..cc89d1f 100644 +--- a/drivers/clk/sunxi/clk-factors.h ++++ b/drivers/clk/sunxi/clk-factors.h +@@ -26,6 +26,7 @@ struct factors_data { + struct clk_factors_config *table; + void (*getter) (u32 *rate, u32 parent_rate, u8 *n, u8 *k, u8 *m, u8 *p); + const char *name; ++ int name_idx; + }; + + struct clk_factors { +diff --git a/drivers/clk/sunxi/clk-multi-gates.c b/drivers/clk/sunxi/clk-multi-gates.c +new file mode 100644 +index 0000000..76e715a +--- /dev/null ++++ b/drivers/clk/sunxi/clk-multi-gates.c +@@ -0,0 +1,105 @@ ++/* ++ * Copyright (C) 2016 ARM Ltd. ++ * ++ * Based on clk-sun8i-bus-gates.c, which is: ++ * Copyright (C) 2015 Jens Kuske <jenskuske@gmail.com> ++ * Based on clk-simple-gates.c, which is: ++ * Copyright 2015 Maxime Ripard <maxime.ripard@free-electrons.com> ++ * ++ * This program is free software; you can redistribute it and/or modify ++ * it under the terms of the GNU General Public License as published by ++ * the Free Software Foundation; either version 2 of the License, or ++ * (at your option) any later version. ++ * ++ * This program is distributed in the hope that it will be useful, ++ * but WITHOUT ANY WARRANTY; without even the implied warranty of ++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the ++ * GNU General Public License for more details. ++ */ ++ ++#include <linux/clk-provider.h> ++#include <linux/of.h> ++#include <linux/of_address.h> ++#include <linux/slab.h> ++#include <linux/spinlock.h> ++ ++static DEFINE_SPINLOCK(gates_lock); ++ ++static void __init sunxi_parse_parent(struct device_node *node, ++ struct clk_onecell_data *clk_data, ++ void __iomem *reg) ++{ ++ const char *parent = of_clk_get_parent_name(node, 0); ++ const char *clk_name; ++ struct property *prop; ++ struct clk *clk; ++ const __be32 *p; ++ int index, i = 0; ++ ++ of_property_for_each_u32(node, "clock-indices", prop, p, index) { ++ of_property_read_string_index(node, "clock-output-names", ++ i, &clk_name); ++ ++ clk = clk_register_gate(NULL, clk_name, parent, 0, ++ reg + 4 * (index / 32), index % 32, ++ 0, &gates_lock); ++ i++; ++ if (IS_ERR(clk)) { ++ pr_warn("could not register gate clock \"%s\"\n", ++ clk_name); ++ continue; ++ } ++ if (clk_data->clks[index]) ++ pr_warn("bus-gate clock %s: index #%d already registered as %s\n", ++ clk_name, index, "?"); ++ else ++ clk_data->clks[index] = clk; ++ } ++} ++ ++static void __init sunxi_multi_bus_gates_init(struct device_node *node) ++{ ++ struct clk_onecell_data *clk_data; ++ struct device_node *child; ++ struct property *prop; ++ struct resource res; ++ void __iomem *reg; ++ const __be32 *p; ++ int number = 0; ++ int index; ++ ++ reg = of_io_request_and_map(node, 0, of_node_full_name(node)); ++ if (IS_ERR(reg)) ++ return; ++ ++ clk_data = kmalloc(sizeof(struct clk_onecell_data), GFP_KERNEL); ++ if (!clk_data) ++ goto err_unmap; ++ ++ for_each_child_of_node(node, child) ++ of_property_for_each_u32(child, "clock-indices", prop, p, index) ++ number = max(number, index); ++ ++ clk_data->clks = kcalloc(number + 1, sizeof(struct clk *), GFP_KERNEL); ++ if (!clk_data->clks) ++ goto err_free_data; ++ ++ for_each_child_of_node(node, child) ++ sunxi_parse_parent(child, clk_data, reg); ++ ++ clk_data->clk_num = number + 1; ++ if (of_clk_add_provider(node, of_clk_src_onecell_get, clk_data)) ++ pr_err("registering bus-gate clock %s failed\n", node->name); ++ ++ return; ++ ++err_free_data: ++ kfree(clk_data); ++err_unmap: ++ iounmap(reg); ++ of_address_to_resource(node, 0, &res); ++ release_mem_region(res.start, resource_size(&res)); ++} ++ ++CLK_OF_DECLARE(sunxi_multi_bus_gates, "allwinner,sunxi-multi-bus-gates-clk", ++ sunxi_multi_bus_gates_init); +diff --git a/drivers/clk/sunxi/clk-sunxi.c b/drivers/clk/sunxi/clk-sunxi.c +index 5ba2188..ca59458 100644 +--- a/drivers/clk/sunxi/clk-sunxi.c ++++ b/drivers/clk/sunxi/clk-sunxi.c +@@ -711,14 +711,14 @@ static const struct factors_data sun4i_pll6_data __initconst = { + .enable = 31, + .table = &sun4i_pll5_config, + .getter = sun4i_get_pll5_factors, +- .name = "pll6", ++ .name_idx = 2, + }; + + static const struct factors_data sun6i_a31_pll6_data __initconst = { + .enable = 31, + .table = &sun6i_a31_pll6_config, + .getter = sun6i_a31_get_pll6_factors, +- .name = "pll6x2", ++ .name_idx = 1, + }; + + static const struct factors_data sun5i_a13_ahb_data __initconst = { +diff --git a/drivers/crypto/Kconfig b/drivers/crypto/Kconfig +index 07d4942..737200f 100644 +--- a/drivers/crypto/Kconfig ++++ b/drivers/crypto/Kconfig +@@ -487,7 +487,7 @@ config CRYPTO_DEV_IMGTEC_HASH + + config CRYPTO_DEV_SUN4I_SS + tristate "Support for Allwinner Security System cryptographic accelerator" +- depends on ARCH_SUNXI ++ depends on ARCH_SUNXI && !64BIT + select CRYPTO_MD5 + select CRYPTO_SHA1 + select CRYPTO_AES +diff --git a/drivers/pinctrl/sunxi/Kconfig b/drivers/pinctrl/sunxi/Kconfig +index f8dbc8b..c1f970f 100644 +--- a/drivers/pinctrl/sunxi/Kconfig ++++ b/drivers/pinctrl/sunxi/Kconfig +@@ -64,4 +64,8 @@ config PINCTRL_SUN9I_A80_R + depends on RESET_CONTROLLER + select PINCTRL_SUNXI_COMMON + ++config PINCTRL_SUN50I_A64 ++ bool ++ select PINCTRL_SUNXI_COMMON ++ + endif +diff --git a/drivers/pinctrl/sunxi/Makefile b/drivers/pinctrl/sunxi/Makefile +index ef82f22..0ca7681 100644 +--- a/drivers/pinctrl/sunxi/Makefile ++++ b/drivers/pinctrl/sunxi/Makefile +@@ -12,6 +12,7 @@ obj-$(CONFIG_PINCTRL_SUN7I_A20) += pinctrl-sun7i-a20.o + obj-$(CONFIG_PINCTRL_SUN8I_A23) += pinctrl-sun8i-a23.o + obj-$(CONFIG_PINCTRL_SUN8I_A23_R) += pinctrl-sun8i-a23-r.o + obj-$(CONFIG_PINCTRL_SUN8I_A33) += pinctrl-sun8i-a33.o ++obj-$(CONFIG_PINCTRL_SUN50I_A64) += pinctrl-sun50i-a64.o + obj-$(CONFIG_PINCTRL_SUN8I_A83T) += pinctrl-sun8i-a83t.o + obj-$(CONFIG_PINCTRL_SUN8I_H3) += pinctrl-sun8i-h3.o + obj-$(CONFIG_PINCTRL_SUN9I_A80) += pinctrl-sun9i-a80.o +diff --git a/drivers/pinctrl/sunxi/pinctrl-sun50i-a64.c b/drivers/pinctrl/sunxi/pinctrl-sun50i-a64.c +new file mode 100644 +index 0000000..a53cc23 +--- /dev/null ++++ b/drivers/pinctrl/sunxi/pinctrl-sun50i-a64.c +@@ -0,0 +1,602 @@ ++/* ++ * Allwinner A64 SoCs pinctrl driver. ++ * ++ * Copyright (C) 2016 - ARM Ltd. ++ * Author: Andre Przywara <andre.przywara@arm.com> ++ * ++ * Based on pinctrl-sun7i-a20.c, which is: ++ * Copyright (C) 2014 Maxime Ripard <maxime.ripard@free-electrons.com> ++ * ++ * This file is licensed under the terms of the GNU General Public ++ * License version 2. This program is licensed "as is" without any ++ * warranty of any kind, whether express or implied. ++ */ ++ ++#include <linux/module.h> ++#include <linux/platform_device.h> ++#include <linux/of.h> ++#include <linux/of_device.h> ++#include <linux/pinctrl/pinctrl.h> ++ ++#include "pinctrl-sunxi.h" ++ ++static const struct sunxi_desc_pin a64_pins[] = { ++ SUNXI_PIN(SUNXI_PINCTRL_PIN(B, 0), ++ SUNXI_FUNCTION(0x0, "gpio_in"), ++ SUNXI_FUNCTION(0x1, "gpio_out"), ++ SUNXI_FUNCTION(0x2, "uart2"), /* TX */ ++ SUNXI_FUNCTION(0x4, "jtag"), /* MS0 */ ++ SUNXI_FUNCTION_IRQ_BANK(0x6, 0, 0)), /* EINT0 */ ++ SUNXI_PIN(SUNXI_PINCTRL_PIN(B, 1), ++ SUNXI_FUNCTION(0x0, "gpio_in"), ++ SUNXI_FUNCTION(0x1, "gpio_out"), ++ SUNXI_FUNCTION(0x2, "uart2"), /* RX */ ++ SUNXI_FUNCTION(0x4, "jtag"), /* CK0 */ ++ SUNXI_FUNCTION(0x5, "sim"), /* VCCEN */ ++ SUNXI_FUNCTION_IRQ_BANK(0x6, 0, 1)), /* EINT1 */ ++ SUNXI_PIN(SUNXI_PINCTRL_PIN(B, 2), ++ SUNXI_FUNCTION(0x0, "gpio_in"), ++ SUNXI_FUNCTION(0x1, "gpio_out"), ++ SUNXI_FUNCTION(0x2, "uart2"), /* RTS */ ++ SUNXI_FUNCTION(0x4, "jtag"), /* DO0 */ ++ SUNXI_FUNCTION(0x5, "sim"), /* VPPEN */ ++ SUNXI_FUNCTION_IRQ_BANK(0x6, 0, 2)), /* EINT2 */ ++ SUNXI_PIN(SUNXI_PINCTRL_PIN(B, 3), ++ SUNXI_FUNCTION(0x0, "gpio_in"), ++ SUNXI_FUNCTION(0x1, "gpio_out"), ++ SUNXI_FUNCTION(0x2, "uart2"), /* CTS */ ++ SUNXI_FUNCTION(0x3, "i2s0"), /* MCLK */ ++ SUNXI_FUNCTION(0x4, "jtag"), /* DI0 */ ++ SUNXI_FUNCTION(0x5, "sim"), /* VPPPP */ ++ SUNXI_FUNCTION_IRQ_BANK(0x6, 0, 3)), /* EINT3 */ ++ SUNXI_PIN(SUNXI_PINCTRL_PIN(B, 4), ++ SUNXI_FUNCTION(0x0, "gpio_in"), ++ SUNXI_FUNCTION(0x1, "gpio_out"), ++ SUNXI_FUNCTION(0x2, "aif2"), /* SYNC */ ++ SUNXI_FUNCTION(0x3, "i2s0"), /* SYNC */ ++ SUNXI_FUNCTION(0x5, "sim"), /* CLK */ ++ SUNXI_FUNCTION_IRQ_BANK(0x6, 0, 4)), /* EINT4 */ ++ SUNXI_PIN(SUNXI_PINCTRL_PIN(B, 5), ++ SUNXI_FUNCTION(0x0, "gpio_in"), ++ SUNXI_FUNCTION(0x1, "gpio_out"), ++ SUNXI_FUNCTION(0x2, "aif2"), /* BCLK */ ++ SUNXI_FUNCTION(0x3, "i2s0"), /* BCLK */ ++ SUNXI_FUNCTION(0x5, "sim"), /* DATA */ ++ SUNXI_FUNCTION_IRQ_BANK(0x6, 0, 5)), /* EINT5 */ ++ SUNXI_PIN(SUNXI_PINCTRL_PIN(B, 6), ++ SUNXI_FUNCTION(0x0, "gpio_in"), ++ SUNXI_FUNCTION(0x1, "gpio_out"), ++ SUNXI_FUNCTION(0x2, "aif2"), /* DOUT */ ++ SUNXI_FUNCTION(0x3, "i2s0"), /* DOUT */ ++ SUNXI_FUNCTION(0x5, "sim"), /* RST */ ++ SUNXI_FUNCTION_IRQ_BANK(0x6, 0, 6)), /* EINT6 */ ++ SUNXI_PIN(SUNXI_PINCTRL_PIN(B, 7), ++ SUNXI_FUNCTION(0x0, "gpio_in"), ++ SUNXI_FUNCTION(0x1, "gpio_out"), ++ SUNXI_FUNCTION(0x2, "aif2"), /* DIN */ ++ SUNXI_FUNCTION(0x3, "i2s0"), /* DIN */ ++ SUNXI_FUNCTION(0x5, "sim"), /* DET */ ++ SUNXI_FUNCTION_IRQ_BANK(0x6, 0, 7)), /* EINT7 */ ++ SUNXI_PIN(SUNXI_PINCTRL_PIN(B, 8), ++ SUNXI_FUNCTION(0x0, "gpio_in"), ++ SUNXI_FUNCTION(0x1, "gpio_out"), ++ SUNXI_FUNCTION(0x4, "uart0"), /* TX */ ++ SUNXI_FUNCTION_IRQ_BANK(0x6, 0, 8)), /* EINT8 */ ++ SUNXI_PIN(SUNXI_PINCTRL_PIN(B, 9), ++ SUNXI_FUNCTION(0x0, "gpio_in"), ++ SUNXI_FUNCTION(0x1, "gpio_out"), ++ SUNXI_FUNCTION(0x4, "uart0"), /* RX */ ++ SUNXI_FUNCTION_IRQ_BANK(0x6, 0, 9)), /* EINT9 */ ++ /* Hole */ ++ SUNXI_PIN(SUNXI_PINCTRL_PIN(C, 0), ++ SUNXI_FUNCTION(0x0, "gpio_in"), ++ SUNXI_FUNCTION(0x1, "gpio_out"), ++ SUNXI_FUNCTION(0x2, "nand0"), /* NWE */ ++ SUNXI_FUNCTION(0x4, "spi0")), /* MOSI */ ++ SUNXI_PIN(SUNXI_PINCTRL_PIN(C, 1), ++ SUNXI_FUNCTION(0x0, "gpio_in"), ++ SUNXI_FUNCTION(0x1, "gpio_out"), ++ SUNXI_FUNCTION(0x2, "nand0"), /* NALE */ ++ SUNXI_FUNCTION(0x3, "mmc2"), /* DS */ ++ SUNXI_FUNCTION(0x4, "spi0")), /* MISO */ ++ SUNXI_PIN(SUNXI_PINCTRL_PIN(C, 2), ++ SUNXI_FUNCTION(0x0, "gpio_in"), ++ SUNXI_FUNCTION(0x1, "gpio_out"), ++ SUNXI_FUNCTION(0x2, "nand0"), /* NCLE */ ++ SUNXI_FUNCTION(0x4, "spi0")), /* SCK */ ++ SUNXI_PIN(SUNXI_PINCTRL_PIN(C, 3), ++ SUNXI_FUNCTION(0x0, "gpio_in"), ++ SUNXI_FUNCTION(0x1, "gpio_out"), ++ SUNXI_FUNCTION(0x2, "nand0"), /* NCE1 */ ++ SUNXI_FUNCTION(0x4, "spi0")), /* CS */ ++ SUNXI_PIN(SUNXI_PINCTRL_PIN(C, 4), ++ SUNXI_FUNCTION(0x0, "gpio_in"), ++ SUNXI_FUNCTION(0x1, "gpio_out"), ++ SUNXI_FUNCTION(0x2, "nand0")), /* NCE0 */ ++ SUNXI_PIN(SUNXI_PINCTRL_PIN(C, 5), ++ SUNXI_FUNCTION(0x0, "gpio_in"), ++ SUNXI_FUNCTION(0x1, "gpio_out"), ++ SUNXI_FUNCTION(0x2, "nand0"), /* NRE# */ ++ SUNXI_FUNCTION(0x3, "mmc2")), /* CLK */ ++ SUNXI_PIN(SUNXI_PINCTRL_PIN(C, 6), ++ SUNXI_FUNCTION(0x0, "gpio_in"), ++ SUNXI_FUNCTION(0x1, "gpio_out"), ++ SUNXI_FUNCTION(0x2, "nand0"), /* NRB0 */ ++ SUNXI_FUNCTION(0x3, "mmc2")), /* CMD */ ++ SUNXI_PIN(SUNXI_PINCTRL_PIN(C, 7), ++ SUNXI_FUNCTION(0x0, "gpio_in"), ++ SUNXI_FUNCTION(0x1, "gpio_out"), ++ SUNXI_FUNCTION(0x2, "nand0")), /* NRB1 */ ++ SUNXI_PIN(SUNXI_PINCTRL_PIN(C, 8), ++ SUNXI_FUNCTION(0x0, "gpio_in"), ++ SUNXI_FUNCTION(0x1, "gpio_out"), ++ SUNXI_FUNCTION(0x2, "nand0"), /* NDQ0 */ ++ SUNXI_FUNCTION(0x3, "mmc2")), /* D0 */ ++ SUNXI_PIN(SUNXI_PINCTRL_PIN(C, 9), ++ SUNXI_FUNCTION(0x0, "gpio_in"), ++ SUNXI_FUNCTION(0x1, "gpio_out"), ++ SUNXI_FUNCTION(0x2, "nand0"), /* NDQ1 */ ++ SUNXI_FUNCTION(0x3, "mmc2")), /* D1 */ ++ SUNXI_PIN(SUNXI_PINCTRL_PIN(C, 10), ++ SUNXI_FUNCTION(0x0, "gpio_in"), ++ SUNXI_FUNCTION(0x1, "gpio_out"), ++ SUNXI_FUNCTION(0x2, "nand0"), /* NDQ2 */ ++ SUNXI_FUNCTION(0x3, "mmc2")), /* D2 */ ++ SUNXI_PIN(SUNXI_PINCTRL_PIN(C, 11), ++ SUNXI_FUNCTION(0x0, "gpio_in"), ++ SUNXI_FUNCTION(0x1, "gpio_out"), ++ SUNXI_FUNCTION(0x2, "nand0"), /* NDQ3 */ ++ SUNXI_FUNCTION(0x3, "mmc2")), /* D3 */ ++ SUNXI_PIN(SUNXI_PINCTRL_PIN(C, 12), ++ SUNXI_FUNCTION(0x0, "gpio_in"), ++ SUNXI_FUNCTION(0x1, "gpio_out"), ++ SUNXI_FUNCTION(0x2, "nand0"), /* NDQ4 */ ++ SUNXI_FUNCTION(0x3, "mmc2")), /* D4 */ ++ SUNXI_PIN(SUNXI_PINCTRL_PIN(C, 13), ++ SUNXI_FUNCTION(0x0, "gpio_in"), ++ SUNXI_FUNCTION(0x1, "gpio_out"), ++ SUNXI_FUNCTION(0x2, "nand0"), /* NDQ5 */ ++ SUNXI_FUNCTION(0x3, "mmc2")), /* D5 */ ++ SUNXI_PIN(SUNXI_PINCTRL_PIN(C, 14), ++ SUNXI_FUNCTION(0x0, "gpio_in"), ++ SUNXI_FUNCTION(0x1, "gpio_out"), ++ SUNXI_FUNCTION(0x2, "nand0"), /* NDQ6 */ ++ SUNXI_FUNCTION(0x3, "mmc2")), /* D6 */ ++ SUNXI_PIN(SUNXI_PINCTRL_PIN(C, 15), ++ SUNXI_FUNCTION(0x0, "gpio_in"), ++ SUNXI_FUNCTION(0x1, "gpio_out"), ++ SUNXI_FUNCTION(0x2, "nand0"), /* NDQ7 */ ++ SUNXI_FUNCTION(0x3, "mmc2")), /* D7 */ ++ SUNXI_PIN(SUNXI_PINCTRL_PIN(C, 16), ++ SUNXI_FUNCTION(0x0, "gpio_in"), ++ SUNXI_FUNCTION(0x1, "gpio_out"), ++ SUNXI_FUNCTION(0x2, "nand0"), /* NDQS */ ++ SUNXI_FUNCTION(0x3, "mmc2")), /* RST */ ++ /* Hole */ ++ SUNXI_PIN(SUNXI_PINCTRL_PIN(D, 0), ++ SUNXI_FUNCTION(0x0, "gpio_in"), ++ SUNXI_FUNCTION(0x1, "gpio_out"), ++ SUNXI_FUNCTION(0x2, "lcd0"), /* D2 */ ++ SUNXI_FUNCTION(0x3, "uart3"), /* TX */ ++ SUNXI_FUNCTION(0x4, "spi1"), /* CS */ ++ SUNXI_FUNCTION(0x5, "ccir")), /* CLK */ ++ SUNXI_PIN(SUNXI_PINCTRL_PIN(D, 1), ++ SUNXI_FUNCTION(0x0, "gpio_in"), ++ SUNXI_FUNCTION(0x1, "gpio_out"), ++ SUNXI_FUNCTION(0x2, "lcd0"), /* D3 */ ++ SUNXI_FUNCTION(0x3, "uart3"), /* RX */ ++ SUNXI_FUNCTION(0x4, "spi1"), /* CLK */ ++ SUNXI_FUNCTION(0x5, "ccir")), /* DE */ ++ SUNXI_PIN(SUNXI_PINCTRL_PIN(D, 2), ++ SUNXI_FUNCTION(0x0, "gpio_in"), ++ SUNXI_FUNCTION(0x1, "gpio_out"), ++ SUNXI_FUNCTION(0x2, "lcd0"), /* D4 */ ++ SUNXI_FUNCTION(0x3, "uart4"), /* TX */ ++ SUNXI_FUNCTION(0x4, "spi1"), /* MOSI */ ++ SUNXI_FUNCTION(0x5, "ccir")), /* HSYNC */ ++ SUNXI_PIN(SUNXI_PINCTRL_PIN(D, 3), ++ SUNXI_FUNCTION(0x0, "gpio_in"), ++ SUNXI_FUNCTION(0x1, "gpio_out"), ++ SUNXI_FUNCTION(0x2, "lcd0"), /* D5 */ ++ SUNXI_FUNCTION(0x3, "uart4"), /* RX */ ++ SUNXI_FUNCTION(0x4, "spi1"), /* MISO */ ++ SUNXI_FUNCTION(0x5, "ccir")), /* VSYNC */ ++ SUNXI_PIN(SUNXI_PINCTRL_PIN(D, 4), ++ SUNXI_FUNCTION(0x0, "gpio_in"), ++ SUNXI_FUNCTION(0x1, "gpio_out"), ++ SUNXI_FUNCTION(0x2, "lcd0"), /* D6 */ ++ SUNXI_FUNCTION(0x3, "uart4"), /* RTS */ ++ SUNXI_FUNCTION(0x5, "ccir")), /* D0 */ ++ SUNXI_PIN(SUNXI_PINCTRL_PIN(D, 5), ++ SUNXI_FUNCTION(0x0, "gpio_in"), ++ SUNXI_FUNCTION(0x1, "gpio_out"), ++ SUNXI_FUNCTION(0x2, "lcd0"), /* D7 */ ++ SUNXI_FUNCTION(0x3, "uart4"), /* CTS */ ++ SUNXI_FUNCTION(0x5, "ccir")), /* D1 */ ++ SUNXI_PIN(SUNXI_PINCTRL_PIN(D, 6), ++ SUNXI_FUNCTION(0x0, "gpio_in"), ++ SUNXI_FUNCTION(0x1, "gpio_out"), ++ SUNXI_FUNCTION(0x2, "lcd0"), /* D10 */ ++ SUNXI_FUNCTION(0x5, "ccir")), /* D2 */ ++ SUNXI_PIN(SUNXI_PINCTRL_PIN(D, 7), ++ SUNXI_FUNCTION(0x0, "gpio_in"), ++ SUNXI_FUNCTION(0x1, "gpio_out"), ++ SUNXI_FUNCTION(0x2, "lcd0"), /* D11 */ ++ SUNXI_FUNCTION(0x5, "ccir")), /* D3 */ ++ SUNXI_PIN(SUNXI_PINCTRL_PIN(D, 8), ++ SUNXI_FUNCTION(0x0, "gpio_in"), ++ SUNXI_FUNCTION(0x1, "gpio_out"), ++ SUNXI_FUNCTION(0x2, "lcd0"), /* D12 */ ++ SUNXI_FUNCTION(0x4, "emac"), /* ERXD3 */ ++ SUNXI_FUNCTION(0x5, "ccir")), /* D4 */ ++ SUNXI_PIN(SUNXI_PINCTRL_PIN(D, 9), ++ SUNXI_FUNCTION(0x0, "gpio_in"), ++ SUNXI_FUNCTION(0x1, "gpio_out"), ++ SUNXI_FUNCTION(0x2, "lcd0"), /* D13 */ ++ SUNXI_FUNCTION(0x4, "emac"), /* ERXD2 */ ++ SUNXI_FUNCTION(0x5, "ccir")), /* D5 */ ++ SUNXI_PIN(SUNXI_PINCTRL_PIN(D, 10), ++ SUNXI_FUNCTION(0x0, "gpio_in"), ++ SUNXI_FUNCTION(0x1, "gpio_out"), ++ SUNXI_FUNCTION(0x2, "lcd0"), /* D14 */ ++ SUNXI_FUNCTION(0x4, "emac")), /* ERXD1 */ ++ SUNXI_PIN(SUNXI_PINCTRL_PIN(D, 11), ++ SUNXI_FUNCTION(0x0, "gpio_in"), ++ SUNXI_FUNCTION(0x1, "gpio_out"), ++ SUNXI_FUNCTION(0x2, "lcd0"), /* D15 */ ++ SUNXI_FUNCTION(0x4, "emac")), /* ERXD0 */ ++ SUNXI_PIN(SUNXI_PINCTRL_PIN(D, 12), ++ SUNXI_FUNCTION(0x0, "gpio_in"), ++ SUNXI_FUNCTION(0x1, "gpio_out"), ++ SUNXI_FUNCTION(0x2, "lcd0"), /* D18 */ ++ SUNXI_FUNCTION(0x3, "lvds0"), /* VP0 */ ++ SUNXI_FUNCTION(0x4, "emac")), /* ERXCK */ ++ SUNXI_PIN(SUNXI_PINCTRL_PIN(D, 13), ++ SUNXI_FUNCTION(0x0, "gpio_in"), ++ SUNXI_FUNCTION(0x1, "gpio_out"), ++ SUNXI_FUNCTION(0x2, "lcd0"), /* D19 */ ++ SUNXI_FUNCTION(0x3, "lvds0"), /* VN0 */ ++ SUNXI_FUNCTION(0x4, "emac")), /* ERXCTL */ ++ SUNXI_PIN(SUNXI_PINCTRL_PIN(D, 14), ++ SUNXI_FUNCTION(0x0, "gpio_in"), ++ SUNXI_FUNCTION(0x1, "gpio_out"), ++ SUNXI_FUNCTION(0x2, "lcd0"), /* D20 */ ++ SUNXI_FUNCTION(0x3, "lvds0"), /* VP1 */ ++ SUNXI_FUNCTION(0x4, "emac")), /* ENULL */ ++ SUNXI_PIN(SUNXI_PINCTRL_PIN(D, 15), ++ SUNXI_FUNCTION(0x0, "gpio_in"), ++ SUNXI_FUNCTION(0x1, "gpio_out"), ++ SUNXI_FUNCTION(0x2, "lcd0"), /* D21 */ ++ SUNXI_FUNCTION(0x3, "lvds0"), /* VN1 */ ++ SUNXI_FUNCTION(0x4, "emac"), /* ETXD3 */ ++ SUNXI_FUNCTION(0x5, "ccir")), /* D6 */ ++ SUNXI_PIN(SUNXI_PINCTRL_PIN(D, 16), ++ SUNXI_FUNCTION(0x0, "gpio_in"), ++ SUNXI_FUNCTION(0x1, "gpio_out"), ++ SUNXI_FUNCTION(0x2, "lcd0"), /* D22 */ ++ SUNXI_FUNCTION(0x3, "lvds0"), /* VP2 */ ++ SUNXI_FUNCTION(0x4, "emac"), /* ETXD2 */ ++ SUNXI_FUNCTION(0x5, "ccir")), /* D7 */ ++ SUNXI_PIN(SUNXI_PINCTRL_PIN(D, 17), ++ SUNXI_FUNCTION(0x0, "gpio_in"), ++ SUNXI_FUNCTION(0x1, "gpio_out"), ++ SUNXI_FUNCTION(0x2, "lcd0"), /* D23 */ ++ SUNXI_FUNCTION(0x3, "lvds0"), /* VN2 */ ++ SUNXI_FUNCTION(0x4, "emac")), /* ETXD1 */ ++ SUNXI_PIN(SUNXI_PINCTRL_PIN(D, 18), ++ SUNXI_FUNCTION(0x0, "gpio_in"), ++ SUNXI_FUNCTION(0x1, "gpio_out"), ++ SUNXI_FUNCTION(0x2, "lcd0"), /* CLK */ ++ SUNXI_FUNCTION(0x3, "lvds0"), /* VPC */ ++ SUNXI_FUNCTION(0x4, "emac")), /* ETXD0 */ ++ SUNXI_PIN(SUNXI_PINCTRL_PIN(D, 19), ++ SUNXI_FUNCTION(0x0, "gpio_in"), ++ SUNXI_FUNCTION(0x1, "gpio_out"), ++ SUNXI_FUNCTION(0x2, "lcd0"), /* DE */ ++ SUNXI_FUNCTION(0x3, "lvds0"), /* VNC */ ++ SUNXI_FUNCTION(0x4, "emac")), /* ETXCK */ ++ SUNXI_PIN(SUNXI_PINCTRL_PIN(D, 20), ++ SUNXI_FUNCTION(0x0, "gpio_in"), ++ SUNXI_FUNCTION(0x1, "gpio_out"), ++ SUNXI_FUNCTION(0x2, "lcd0"), /* HSYNC */ ++ SUNXI_FUNCTION(0x3, "lvds0"), /* VP3 */ ++ SUNXI_FUNCTION(0x4, "emac")), /* ETXCTL */ ++ SUNXI_PIN(SUNXI_PINCTRL_PIN(D, 21), ++ SUNXI_FUNCTION(0x0, "gpio_in"), ++ SUNXI_FUNCTION(0x1, "gpio_out"), ++ SUNXI_FUNCTION(0x2, "lcd0"), /* VSYNC */ ++ SUNXI_FUNCTION(0x3, "lvds0"), /* VN3 */ ++ SUNXI_FUNCTION(0x4, "emac")), /* ECLKIN */ ++ SUNXI_PIN(SUNXI_PINCTRL_PIN(D, 22), ++ SUNXI_FUNCTION(0x0, "gpio_in"), ++ SUNXI_FUNCTION(0x1, "gpio_out"), ++ SUNXI_FUNCTION(0x2, "pwm"), /* PWM0 */ ++ SUNXI_FUNCTION(0x4, "emac")), /* EMDC */ ++ SUNXI_PIN(SUNXI_PINCTRL_PIN(D, 23), ++ SUNXI_FUNCTION(0x0, "gpio_in"), ++ SUNXI_FUNCTION(0x1, "gpio_out"), ++ SUNXI_FUNCTION(0x4, "emac")), /* EMDIO */ ++ SUNXI_PIN(SUNXI_PINCTRL_PIN(D, 24), ++ SUNXI_FUNCTION(0x0, "gpio_in"), ++ SUNXI_FUNCTION(0x1, "gpio_out")), ++ /* Hole */ ++ SUNXI_PIN(SUNXI_PINCTRL_PIN(E, 0), ++ SUNXI_FUNCTION(0x0, "gpio_in"), ++ SUNXI_FUNCTION(0x1, "gpio_out"), ++ SUNXI_FUNCTION(0x2, "csi0"), /* PCK */ ++ SUNXI_FUNCTION(0x4, "ts0")), /* CLK */ ++ SUNXI_PIN(SUNXI_PINCTRL_PIN(E, 1), ++ SUNXI_FUNCTION(0x0, "gpio_in"), ++ SUNXI_FUNCTION(0x1, "gpio_out"), ++ SUNXI_FUNCTION(0x2, "csi0"), /* CK */ ++ SUNXI_FUNCTION(0x4, "ts0")), /* ERR */ ++ SUNXI_PIN(SUNXI_PINCTRL_PIN(E, 2), ++ SUNXI_FUNCTION(0x0, "gpio_in"), ++ SUNXI_FUNCTION(0x1, "gpio_out"), ++ SUNXI_FUNCTION(0x2, "csi0"), /* HSYNC */ ++ SUNXI_FUNCTION(0x4, "ts0")), /* SYNC */ ++ SUNXI_PIN(SUNXI_PINCTRL_PIN(E, 3), ++ SUNXI_FUNCTION(0x0, "gpio_in"), ++ SUNXI_FUNCTION(0x1, "gpio_out"), ++ SUNXI_FUNCTION(0x2, "csi0"), /* VSYNC */ ++ SUNXI_FUNCTION(0x4, "ts0")), /* DVLD */ ++ SUNXI_PIN(SUNXI_PINCTRL_PIN(E, 4), ++ SUNXI_FUNCTION(0x0, "gpio_in"), ++ SUNXI_FUNCTION(0x1, "gpio_out"), ++ SUNXI_FUNCTION(0x2, "csi0"), /* D0 */ ++ SUNXI_FUNCTION(0x4, "ts0")), /* D0 */ ++ SUNXI_PIN(SUNXI_PINCTRL_PIN(E, 5), ++ SUNXI_FUNCTION(0x0, "gpio_in"), ++ SUNXI_FUNCTION(0x1, "gpio_out"), ++ SUNXI_FUNCTION(0x2, "csi0"), /* D1 */ ++ SUNXI_FUNCTION(0x4, "ts0")), /* D1 */ ++ SUNXI_PIN(SUNXI_PINCTRL_PIN(E, 6), ++ SUNXI_FUNCTION(0x0, "gpio_in"), ++ SUNXI_FUNCTION(0x1, "gpio_out"), ++ SUNXI_FUNCTION(0x2, "csi0"), /* D2 */ ++ SUNXI_FUNCTION(0x4, "ts0")), /* D2 */ ++ SUNXI_PIN(SUNXI_PINCTRL_PIN(E, 7), ++ SUNXI_FUNCTION(0x0, "gpio_in"), ++ SUNXI_FUNCTION(0x1, "gpio_out"), ++ SUNXI_FUNCTION(0x2, "csi0"), /* D3 */ ++ SUNXI_FUNCTION(0x4, "ts0")), /* D3 */ ++ SUNXI_PIN(SUNXI_PINCTRL_PIN(E, 8), ++ SUNXI_FUNCTION(0x0, "gpio_in"), ++ SUNXI_FUNCTION(0x1, "gpio_out"), ++ SUNXI_FUNCTION(0x2, "csi0"), /* D4 */ ++ SUNXI_FUNCTION(0x4, "ts0")), /* D4 */ ++ SUNXI_PIN(SUNXI_PINCTRL_PIN(E, 9), ++ SUNXI_FUNCTION(0x0, "gpio_in"), ++ SUNXI_FUNCTION(0x1, "gpio_out"), ++ SUNXI_FUNCTION(0x2, "csi0"), /* D5 */ ++ SUNXI_FUNCTION(0x4, "ts0")), /* D5 */ ++ SUNXI_PIN(SUNXI_PINCTRL_PIN(E, 10), ++ SUNXI_FUNCTION(0x0, "gpio_in"), ++ SUNXI_FUNCTION(0x1, "gpio_out"), ++ SUNXI_FUNCTION(0x2, "csi0"), /* D6 */ ++ SUNXI_FUNCTION(0x4, "ts0")), /* D6 */ ++ SUNXI_PIN(SUNXI_PINCTRL_PIN(E, 11), ++ SUNXI_FUNCTION(0x0, "gpio_in"), ++ SUNXI_FUNCTION(0x1, "gpio_out"), ++ SUNXI_FUNCTION(0x2, "csi0"), /* D7 */ ++ SUNXI_FUNCTION(0x4, "ts0")), /* D7 */ ++ SUNXI_PIN(SUNXI_PINCTRL_PIN(E, 12), ++ SUNXI_FUNCTION(0x0, "gpio_in"), ++ SUNXI_FUNCTION(0x1, "gpio_out"), ++ SUNXI_FUNCTION(0x2, "csi0")), /* SCK */ ++ SUNXI_PIN(SUNXI_PINCTRL_PIN(E, 13), ++ SUNXI_FUNCTION(0x0, "gpio_in"), ++ SUNXI_FUNCTION(0x1, "gpio_out"), ++ SUNXI_FUNCTION(0x2, "csi0")), /* SDA */ ++ SUNXI_PIN(SUNXI_PINCTRL_PIN(E, 14), ++ SUNXI_FUNCTION(0x0, "gpio_in"), ++ SUNXI_FUNCTION(0x1, "gpio_out"), ++ SUNXI_FUNCTION(0x2, "pll"), /* LOCK_DBG */ ++ SUNXI_FUNCTION(0x3, "i2c2")), /* SCK */ ++ SUNXI_PIN(SUNXI_PINCTRL_PIN(E, 15), ++ SUNXI_FUNCTION(0x0, "gpio_in"), ++ SUNXI_FUNCTION(0x1, "gpio_out"), ++ SUNXI_FUNCTION(0x3, "i2c2")), /* SDA */ ++ SUNXI_PIN(SUNXI_PINCTRL_PIN(E, 16), ++ SUNXI_FUNCTION(0x0, "gpio_in"), ++ SUNXI_FUNCTION(0x1, "gpio_out")), ++ SUNXI_PIN(SUNXI_PINCTRL_PIN(E, 17), ++ SUNXI_FUNCTION(0x0, "gpio_in"), ++ SUNXI_FUNCTION(0x1, "gpio_out")), ++ /* Hole */ ++ SUNXI_PIN(SUNXI_PINCTRL_PIN(F, 0), ++ SUNXI_FUNCTION(0x0, "gpio_in"), ++ SUNXI_FUNCTION(0x1, "gpio_out"), ++ SUNXI_FUNCTION(0x2, "mmc0"), /* D1 */ ++ SUNXI_FUNCTION(0x3, "jtag")), /* MSI */ ++ SUNXI_PIN(SUNXI_PINCTRL_PIN(F, 1), ++ SUNXI_FUNCTION(0x0, "gpio_in"), ++ SUNXI_FUNCTION(0x1, "gpio_out"), ++ SUNXI_FUNCTION(0x2, "mmc0"), /* D0 */ ++ SUNXI_FUNCTION(0x3, "jtag")), /* DI1 */ ++ SUNXI_PIN(SUNXI_PINCTRL_PIN(F, 2), ++ SUNXI_FUNCTION(0x0, "gpio_in"), ++ SUNXI_FUNCTION(0x1, "gpio_out"), ++ SUNXI_FUNCTION(0x2, "mmc0"), /* CLK */ ++ SUNXI_FUNCTION(0x3, "uart0")), /* TX */ ++ SUNXI_PIN(SUNXI_PINCTRL_PIN(F, 3), ++ SUNXI_FUNCTION(0x0, "gpio_in"), ++ SUNXI_FUNCTION(0x1, "gpio_out"), ++ SUNXI_FUNCTION(0x2, "mmc0"), /* CMD */ ++ SUNXI_FUNCTION(0x3, "jtag")), /* DO1 */ ++ SUNXI_PIN(SUNXI_PINCTRL_PIN(F, 4), ++ SUNXI_FUNCTION(0x0, "gpio_in"), ++ SUNXI_FUNCTION(0x1, "gpio_out"), ++ SUNXI_FUNCTION(0x2, "mmc0"), /* D3 */ ++ SUNXI_FUNCTION(0x4, "uart0")), /* RX */ ++ SUNXI_PIN(SUNXI_PINCTRL_PIN(F, 5), ++ SUNXI_FUNCTION(0x0, "gpio_in"), ++ SUNXI_FUNCTION(0x1, "gpio_out"), ++ SUNXI_FUNCTION(0x2, "mmc0"), /* D2 */ ++ SUNXI_FUNCTION(0x3, "jtag")), /* CK1 */ ++ SUNXI_PIN(SUNXI_PINCTRL_PIN(F, 6), ++ SUNXI_FUNCTION(0x0, "gpio_in"), ++ SUNXI_FUNCTION(0x1, "gpio_out")), ++ /* Hole */ ++ SUNXI_PIN(SUNXI_PINCTRL_PIN(G, 0), ++ SUNXI_FUNCTION(0x0, "gpio_in"), ++ SUNXI_FUNCTION(0x1, "gpio_out"), ++ SUNXI_FUNCTION(0x2, "mmc1"), /* CLK */ ++ SUNXI_FUNCTION_IRQ_BANK(0x6, 1, 0)), /* EINT0 */ ++ SUNXI_PIN(SUNXI_PINCTRL_PIN(G, 1), ++ SUNXI_FUNCTION(0x0, "gpio_in"), ++ SUNXI_FUNCTION(0x1, "gpio_out"), ++ SUNXI_FUNCTION(0x2, "mmc1"), /* CMD */ ++ SUNXI_FUNCTION_IRQ_BANK(0x6, 1, 1)), /* EINT1 */ ++ SUNXI_PIN(SUNXI_PINCTRL_PIN(G, 2), ++ SUNXI_FUNCTION(0x0, "gpio_in"), ++ SUNXI_FUNCTION(0x1, "gpio_out"), ++ SUNXI_FUNCTION(0x2, "mmc1"), /* D0 */ ++ SUNXI_FUNCTION_IRQ_BANK(0x6, 1, 2)), /* EINT2 */ ++ SUNXI_PIN(SUNXI_PINCTRL_PIN(G, 3), ++ SUNXI_FUNCTION(0x0, "gpio_in"), ++ SUNXI_FUNCTION(0x1, "gpio_out"), ++ SUNXI_FUNCTION(0x2, "mmc1"), /* D1 */ ++ SUNXI_FUNCTION_IRQ_BANK(0x6, 1, 3)), /* EINT3 */ ++ SUNXI_PIN(SUNXI_PINCTRL_PIN(G, 4), ++ SUNXI_FUNCTION(0x0, "gpio_in"), ++ SUNXI_FUNCTION(0x1, "gpio_out"), ++ SUNXI_FUNCTION(0x2, "mmc1"), /* D2 */ ++ SUNXI_FUNCTION_IRQ_BANK(0x6, 1, 4)), /* EINT4 */ ++ SUNXI_PIN(SUNXI_PINCTRL_PIN(G, 5), ++ SUNXI_FUNCTION(0x0, "gpio_in"), ++ SUNXI_FUNCTION(0x1, "gpio_out"), ++ SUNXI_FUNCTION(0x2, "mmc1"), /* D3 */ ++ SUNXI_FUNCTION_IRQ_BANK(0x6, 1, 5)), /* EINT5 */ ++ SUNXI_PIN(SUNXI_PINCTRL_PIN(G, 6), ++ SUNXI_FUNCTION(0x0, "gpio_in"), ++ SUNXI_FUNCTION(0x1, "gpio_out"), ++ SUNXI_FUNCTION(0x2, "uart1"), /* TX */ ++ SUNXI_FUNCTION_IRQ_BANK(0x6, 1, 6)), /* EINT6 */ ++ SUNXI_PIN(SUNXI_PINCTRL_PIN(G, 7), ++ SUNXI_FUNCTION(0x0, "gpio_in"), ++ SUNXI_FUNCTION(0x1, "gpio_out"), ++ SUNXI_FUNCTION(0x2, "uart1"), /* RX */ ++ SUNXI_FUNCTION_IRQ_BANK(0x6, 1, 7)), /* EINT7 */ ++ SUNXI_PIN(SUNXI_PINCTRL_PIN(G, 8), ++ SUNXI_FUNCTION(0x0, "gpio_in"), ++ SUNXI_FUNCTION(0x1, "gpio_out"), ++ SUNXI_FUNCTION(0x2, "uart1"), /* RTS */ ++ SUNXI_FUNCTION_IRQ_BANK(0x6, 1, 8)), /* EINT8 */ ++ SUNXI_PIN(SUNXI_PINCTRL_PIN(G, 9), ++ SUNXI_FUNCTION(0x0, "gpio_in"), ++ SUNXI_FUNCTION(0x1, "gpio_out"), ++ SUNXI_FUNCTION(0x2, "uart1"), /* CTS */ ++ SUNXI_FUNCTION_IRQ_BANK(0x6, 1, 9)), /* EINT9 */ ++ SUNXI_PIN(SUNXI_PINCTRL_PIN(G, 10), ++ SUNXI_FUNCTION(0x0, "gpio_in"), ++ SUNXI_FUNCTION(0x1, "gpio_out"), ++ SUNXI_FUNCTION(0x2, "aif3"), /* SYNC */ ++ SUNXI_FUNCTION(0x3, "i2s1"), /* SYNC */ ++ SUNXI_FUNCTION_IRQ_BANK(0x6, 1, 10)), /* EINT10 */ ++ SUNXI_PIN(SUNXI_PINCTRL_PIN(G, 11), ++ SUNXI_FUNCTION(0x0, "gpio_in"), ++ SUNXI_FUNCTION(0x1, "gpio_out"), ++ SUNXI_FUNCTION(0x2, "aif3"), /* BCLK */ ++ SUNXI_FUNCTION(0x3, "i2s1"), /* BCLK */ ++ SUNXI_FUNCTION_IRQ_BANK(0x6, 1, 11)), /* EINT11 */ ++ SUNXI_PIN(SUNXI_PINCTRL_PIN(G, 12), ++ SUNXI_FUNCTION(0x0, "gpio_in"), ++ SUNXI_FUNCTION(0x1, "gpio_out"), ++ SUNXI_FUNCTION(0x2, "aif3"), /* DOUT */ ++ SUNXI_FUNCTION(0x3, "i2s1"), /* DOUT */ ++ SUNXI_FUNCTION_IRQ_BANK(0x6, 1, 12)), /* EINT12 */ ++ SUNXI_PIN(SUNXI_PINCTRL_PIN(G, 13), ++ SUNXI_FUNCTION(0x0, "gpio_in"), ++ SUNXI_FUNCTION(0x1, "gpio_out"), ++ SUNXI_FUNCTION(0x2, "aif3"), /* DIN */ ++ SUNXI_FUNCTION(0x3, "i2s1"), /* DIN */ ++ SUNXI_FUNCTION_IRQ_BANK(0x6, 1, 13)), /* EINT13 */ ++ /* Hole */ ++ SUNXI_PIN(SUNXI_PINCTRL_PIN(H, 0), ++ SUNXI_FUNCTION(0x0, "gpio_in"), ++ SUNXI_FUNCTION(0x1, "gpio_out"), ++ SUNXI_FUNCTION(0x2, "i2c0"), /* SCK */ ++ SUNXI_FUNCTION_IRQ_BANK(0x6, 2, 0)), /* EINT0 */ ++ SUNXI_PIN(SUNXI_PINCTRL_PIN(H, 1), ++ SUNXI_FUNCTION(0x0, "gpio_in"), ++ SUNXI_FUNCTION(0x1, "gpio_out"), ++ SUNXI_FUNCTION(0x2, "i2c0"), /* SDA */ ++ SUNXI_FUNCTION_IRQ_BANK(0x6, 2, 1)), /* EINT1 */ ++ SUNXI_PIN(SUNXI_PINCTRL_PIN(H, 2), ++ SUNXI_FUNCTION(0x0, "gpio_in"), ++ SUNXI_FUNCTION(0x1, "gpio_out"), ++ SUNXI_FUNCTION(0x2, "i2c1"), /* SCK */ ++ SUNXI_FUNCTION_IRQ_BANK(0x6, 2, 2)), /* EINT2 */ ++ SUNXI_PIN(SUNXI_PINCTRL_PIN(H, 3), ++ SUNXI_FUNCTION(0x0, "gpio_in"), ++ SUNXI_FUNCTION(0x1, "gpio_out"), ++ SUNXI_FUNCTION(0x2, "i2c1"), /* SDA */ ++ SUNXI_FUNCTION_IRQ_BANK(0x6, 2, 3)), /* EINT3 */ ++ SUNXI_PIN(SUNXI_PINCTRL_PIN(H, 4), ++ SUNXI_FUNCTION(0x0, "gpio_in"), ++ SUNXI_FUNCTION(0x1, "gpio_out"), ++ SUNXI_FUNCTION(0x2, "uart3"), /* TX */ ++ SUNXI_FUNCTION_IRQ_BANK(0x6, 2, 4)), /* EINT4 */ ++ SUNXI_PIN(SUNXI_PINCTRL_PIN(H, 5), ++ SUNXI_FUNCTION(0x0, "gpio_in"), ++ SUNXI_FUNCTION(0x1, "gpio_out"), ++ SUNXI_FUNCTION(0x2, "uart3"), /* RX */ ++ SUNXI_FUNCTION_IRQ_BANK(0x6, 2, 5)), /* EINT5 */ ++ SUNXI_PIN(SUNXI_PINCTRL_PIN(H, 6), ++ SUNXI_FUNCTION(0x0, "gpio_in"), ++ SUNXI_FUNCTION(0x1, "gpio_out"), ++ SUNXI_FUNCTION(0x2, "uart3"), /* RTS */ ++ SUNXI_FUNCTION_IRQ_BANK(0x6, 2, 6)), /* EINT6 */ ++ SUNXI_PIN(SUNXI_PINCTRL_PIN(H, 7), ++ SUNXI_FUNCTION(0x0, "gpio_in"), ++ SUNXI_FUNCTION(0x1, "gpio_out"), ++ SUNXI_FUNCTION(0x2, "uart3"), /* CTS */ ++ SUNXI_FUNCTION_IRQ_BANK(0x6, 2, 7)), /* EINT7 */ ++ SUNXI_PIN(SUNXI_PINCTRL_PIN(H, 8), ++ SUNXI_FUNCTION(0x0, "gpio_in"), ++ SUNXI_FUNCTION(0x1, "gpio_out"), ++ SUNXI_FUNCTION(0x2, "spdif"), /* OUT */ ++ SUNXI_FUNCTION_IRQ_BANK(0x6, 2, 8)), /* EINT8 */ ++ SUNXI_PIN(SUNXI_PINCTRL_PIN(H, 9), ++ SUNXI_FUNCTION(0x0, "gpio_in"), ++ SUNXI_FUNCTION(0x1, "gpio_out"), ++ SUNXI_FUNCTION_IRQ_BANK(0x6, 2, 9)), /* EINT9 */ ++ SUNXI_PIN(SUNXI_PINCTRL_PIN(H, 10), ++ SUNXI_FUNCTION(0x0, "gpio_in"), ++ SUNXI_FUNCTION(0x1, "gpio_out"), ++ SUNXI_FUNCTION(0x2, "mic"), /* CLK */ ++ SUNXI_FUNCTION_IRQ_BANK(0x6, 2, 10)), /* EINT10 */ ++ SUNXI_PIN(SUNXI_PINCTRL_PIN(H, 11), ++ SUNXI_FUNCTION(0x0, "gpio_in"), ++ SUNXI_FUNCTION(0x1, "gpio_out"), ++ SUNXI_FUNCTION(0x2, "mic"), /* DATA */ ++ SUNXI_FUNCTION_IRQ_BANK(0x6, 2, 11)), /* EINT11 */ ++}; ++ ++static const struct sunxi_pinctrl_desc a64_pinctrl_data = { ++ .pins = a64_pins, ++ .npins = ARRAY_SIZE(a64_pins), ++ .irq_banks = 3, ++}; ++ ++static int a64_pinctrl_probe(struct platform_device *pdev) ++{ ++ return sunxi_pinctrl_init(pdev, ++ &a64_pinctrl_data); ++} ++ ++static const struct of_device_id a64_pinctrl_match[] = { ++ { .compatible = "allwinner,sun50i-a64-pinctrl", }, ++ {} ++}; ++MODULE_DEVICE_TABLE(of, a64_pinctrl_match); ++ ++static struct platform_driver a64_pinctrl_driver = { ++ .probe = a64_pinctrl_probe, ++ .driver = { ++ .name = "sun50i-a64-pinctrl", ++ .of_match_table = a64_pinctrl_match, ++ }, ++}; ++builtin_platform_driver(a64_pinctrl_driver); +diff --git a/drivers/rtc/Kconfig b/drivers/rtc/Kconfig +index 376322f..526eaf4 100644 +--- a/drivers/rtc/Kconfig ++++ b/drivers/rtc/Kconfig +@@ -1360,10 +1360,11 @@ config RTC_DRV_SUN4V + + config RTC_DRV_SUN6I + tristate "Allwinner A31 RTC" +- depends on MACH_SUN6I || MACH_SUN8I ++ default MACH_SUN6I || MACH_SUN8I ++ depends on ARCH_SUNXI + help +- If you say Y here you will get support for the RTC found on +- Allwinner A31. ++ If you say Y here you will get support for the RTC found in ++ some Allwinner SoCs like the A31 or the A64. + + config RTC_DRV_SUNXI + tristate "Allwinner sun4i/sun7i RTC" +-- +2.5.0 + diff --git a/config-arm-generic b/config-arm-generic index 987695636..8215a36a8 100644 --- a/config-arm-generic +++ b/config-arm-generic @@ -79,6 +79,11 @@ CONFIG_CRYPTO_SHA1_ARM_NEON=y CONFIG_CRYPTO_SHA512_ARM_NEON=y CONFIG_CRYPTO_SHA512_ARM=y +# EDAC +CONFIG_EDAC=y +CONFIG_EDAC_MM_EDAC=m +CONFIG_EDAC_LEGACY_SYSFS=y + # ARM VExpress CONFIG_ARCH_VEXPRESS=y CONFIG_MFD_VEXPRESS_SYSREG=y @@ -128,8 +133,41 @@ CONFIG_CRYPTO_DEV_ROCKCHIP=m CONFIG_ROCKCHIP_EFUSE=m # Tegra -# CONFIG_TEGRA_AHB is not set -# +CONFIG_ARM_TEGRA_CPUFREQ=y +CONFIG_TEGRA_MC=y +CONFIG_TEGRA124_EMC=y +CONFIG_TEGRA_IOMMU_SMMU=y +CONFIG_TEGRA_AHB=y +CONFIG_TEGRA20_APB_DMA=y +CONFIG_TRUSTED_FOUNDATIONS=y +CONFIG_SERIAL_TEGRA=y +CONFIG_PCI_TEGRA=y +CONFIG_AHCI_TEGRA=m +CONFIG_MMC_SDHCI_TEGRA=m +CONFIG_TEGRA_WATCHDOG=m +CONFIG_I2C_TEGRA=m +CONFIG_SPI_TEGRA114=m +CONFIG_PWM_TEGRA=m +CONFIG_KEYBOARD_TEGRA=m +CONFIG_USB_EHCI_TEGRA=m +CONFIG_RTC_DRV_TEGRA=m +CONFIG_ARM_TEGRA_DEVFREQ=m +CONFIG_ARM_TEGRA124_CPUFREQ=m +CONFIG_TEGRA_SOCTHERM=m + +CONFIG_TEGRA_HOST1X=m +CONFIG_TEGRA_HOST1X_FIREWALL=y +CONFIG_DRM_TEGRA=m +CONFIG_DRM_TEGRA_FBDEV=y +# CONFIG_DRM_TEGRA_DEBUG is not set +CONFIG_DRM_TEGRA_STAGING=y +CONFIG_NOUVEAU_PLATFORM_DRIVER=y +CONFIG_SND_HDA_TEGRA=m + +# CONFIG_ARM_TEGRA20_CPUFREQ is not set +# CONFIG_MFD_NVEC is not set +# CONFIG_TEGRA20_APB_DMA is not set + # Virt CONFIG_PARAVIRT=y CONFIG_PARAVIRT_TIME_ACCOUNTING=y @@ -248,6 +286,18 @@ CONFIG_USB_CONFIGFS_SERIAL=y CONFIG_MMC_SPI=m CONFIG_MMC_SDHCI_OF_ARASAN=m +# LCD Panels +CONFIG_DRM_PANEL=y +CONFIG_DRM_PANEL_SIMPLE=m +CONFIG_DRM_PANEL_LD9040=m +CONFIG_DRM_PANEL_LG_LG4573=m +CONFIG_DRM_PANEL_PANASONIC_VVX10F034N00=m +CONFIG_DRM_PANEL_S6E8AA0=m +CONFIG_DRM_PANEL_SHARP_LQ101R1SX01=m +CONFIG_DRM_PANEL_SHARP_LS043T1LE01=m +CONFIG_DRM_PANEL_SAMSUNG_LD9040=m +CONFIG_DRM_PANEL_SAMSUNG_S6E8AA0=m + # Designware (used by numerous devices) CONFIG_MMC_DW=m CONFIG_MMC_DW_PLTFM=m @@ -367,11 +417,6 @@ CONFIG_CMA_SIZE_SEL_MBYTES=y CONFIG_CMA_ALIGNMENT=8 CONFIG_CMA_AREAS=7 -# EDAC -CONFIG_EDAC=y -CONFIG_EDAC_MM_EDAC=m -CONFIG_EDAC_LEGACY_SYSFS=y - # VFIO CONFIG_VFIO_PLATFORM=m CONFIG_VFIO_AMBA=m diff --git a/config-arm64 b/config-arm64 index 1ef481a75..773a35ee5 100644 --- a/config-arm64 +++ b/config-arm64 @@ -9,6 +9,8 @@ CONFIG_SCHED_SMT=y # arm64 only SoCs CONFIG_ARCH_HISI=y CONFIG_ARCH_SEATTLE=y +CONFIG_ARCH_SUNXI=y +CONFIG_ARCH_TEGRA=y CONFIG_ARCH_XGENE=y # CONFIG_ARCH_BCM_IPROC is not set # CONFIG_ARCH_BERLIN is not set @@ -20,7 +22,6 @@ CONFIG_ARCH_XGENE=y # CONFIG_ARCH_RENESAS is not set # CONFIG_ARCH_SPRD is not set # CONFIG_ARCH_STRATIX10 is not set -# CONFIG_ARCH_TEGRA is not set # CONFIG_ARCH_THUNDER is not set # CONFIG_ARCH_ZYNQMP is not set # CONFIG_ARCH_UNIPHIER is not set @@ -142,6 +143,31 @@ CONFIG_STUB_CLK_HI6220=y CONFIG_PHY_HI6220_USB=m CONFIG_COMMON_RESET_HI6220=m +# Tegra +CONFIG_ARCH_TEGRA_132_SOC=y +CONFIG_ARCH_TEGRA_210_SOC=y + +# AllWinner +CONFIG_MACH_SUN50I=y +CONFIG_SUNXI_RSB=m +CONFIG_AHCI_SUNXI=m +CONFIG_NET_VENDOR_ALLWINNER=y +# CONFIG_SUN4I_EMAC is not set +# CONFIG_MDIO_SUN4I is not set +# CONFIG_KEYBOARD_SUN4I_LRADC is not set +# CONFIG_TOUCHSCREEN_SUN4I is not set +# CONFIG_SERIO_SUN4I_PS2 is not set +CONFIG_I2C_MV64XXX=m +CONFIG_SUNXI_WATCHDOG=m +CONFIG_MFD_SUN6I_PRCM=y +CONFIG_IR_SUNXI=m +CONFIG_MMC_SUNXI=m +CONFIG_RTC_DRV_SUN6I=m +CONFIG_PWM_SUN4I=m +# CONFIG_PHY_SUN4I_USB is not set +# CONFIG_PHY_SUN9I_USB is not set +CONFIG_NVMEM_SUNXI_SID=m + # ThunderX # CONFIG_MDIO_OCTEON is not set diff --git a/config-armv7 b/config-armv7 index bf1742e09..0cce9bc04 100644 --- a/config-armv7 +++ b/config-armv7 @@ -3,6 +3,7 @@ # CONFIG_ARCH_BERLIN is not set # CONFIG_ARCH_KEYSTONE is not set CONFIG_ARCH_MXC=y +CONFIG_ARCH_MMP=y CONFIG_ARCH_OMAP3=y CONFIG_ARCH_OMAP4=y CONFIG_ARCH_QCOM=y @@ -510,6 +511,24 @@ CONFIG_REGULATOR_DA9055=m # picoxcell # CONFIG_CRYPTO_DEV_PICOXCELL is not set +# MMP XO 1.75 +# CONFIG_MACH_BROWNSTONE is not set +# CONFIG_MACH_FLINT is not set +# CONFIG_MACH_MARVELL_JASPER is not set +CONFIG_MACH_MMP2_DT=y +CONFIG_SERIAL_PXA=y +CONFIG_SERIAL_PXA_CONSOLE=y +CONFIG_KEYBOARD_PXA27x=y +CONFIG_I2C_PXA=m +# CONFIG_I2C_PXA_SLAVE is not set +CONFIG_SND_MMP_SOC=y +CONFIG_SND_PXA910_SOC=m +CONFIG_MMC_SDHCI_PXAV2=m +CONFIG_MMP_PDMA=y +CONFIG_MMP_TDMA=y +CONFIG_PXA_DMA=y +CONFIG_SERIO_OLPC_APSP=m + # Exynos 4 CONFIG_ARCH_EXYNOS4=y CONFIG_SOC_EXYNOS4212=y @@ -591,9 +610,6 @@ CONFIG_MFD_TPS6586X=y CONFIG_GPIO_TPS6586X=y CONFIG_RTC_DRV_TPS6586X=m -# OLPC XO -CONFIG_SERIO_OLPC_APSP=m - # Zynq-7xxx CONFIG_SERIAL_UARTLITE=y CONFIG_SERIAL_UARTLITE_CONSOLE=y @@ -626,9 +642,9 @@ CONFIG_USB_GADGET_XILINX=m CONFIG_PCIE_XILINX=y CONFIG_CADENCE_WATCHDOG=m CONFIG_REGULATOR_ISL9305=m -CONFIG_EDAC_SYNOPSYS=m CONFIG_PINCTRL_ZYNQ=y CONFIG_AXI_DMAC=m +CONFIG_EDAC_SYNOPSYS=m # Multi function devices CONFIG_MFD_88PM800=m diff --git a/config-armv7-generic b/config-armv7-generic index d845e63c0..563811d20 100644 --- a/config-armv7-generic +++ b/config-armv7-generic @@ -19,7 +19,8 @@ CONFIG_ARM_UNWIND=y CONFIG_ARM_THUMB=y CONFIG_ARM_THUMBEE=y CONFIG_ARM_ASM_UNIFIED=y -CONFIG_ARM_PATCH_IDIV=y +# see rhbz 1303147 +# CONFIG_ARM_PATCH_IDIV is not set CONFIG_ARM_CPU_TOPOLOGY=y CONFIG_ARM_DMA_MEM_BUFFERABLE=y CONFIG_SWP_EMULATE=y @@ -49,6 +50,7 @@ CONFIG_CPU_SW_DOMAIN_PAN=y # CONFIG_ARM_VIRT_EXT is not set # Platforms enabled/disabled globally on ARMv7 +CONFIG_ARCH_BCM2835=y CONFIG_ARCH_EXYNOS=y CONFIG_ARCH_HIGHBANK=y CONFIG_ARCH_SUNXI=y @@ -170,8 +172,6 @@ CONFIG_RTC_DRV_PL030=y CONFIG_AMBA_PL08X=y CONFIG_SND_ARMAACI=m -CONFIG_EDAC=y - # highbank CONFIG_EDAC_HIGHBANK_MC=m CONFIG_EDAC_HIGHBANK_L2=m @@ -188,6 +188,7 @@ CONFIG_MACH_SUN6I=y CONFIG_MACH_SUN7I=y CONFIG_MACH_SUN8I=y # CONFIG_MACH_SUN9I is not set +# CONFIG_MACH_SUN50I is not set CONFIG_SUNXI_SRAM=y CONFIG_DMA_SUN4I=m CONFIG_DMA_SUN6I=m @@ -229,6 +230,22 @@ CONFIG_SND_SUN4I_CODEC=m CONFIG_SUNXI_RSB=m CONFIG_NVMEM_SUNXI_SID=m +# BCM 283x +CONFIG_SERIAL_AMBA_PL011=y +CONFIG_SERIAL_AMBA_PL011_CONSOLE=y +CONFIG_DMA_BCM2835=m +CONFIG_MMC_SDHCI_BCM2835=m +CONFIG_BCM2835_MBOX=m +CONFIG_PWM_BCM2835=m +CONFIG_HW_RANDOM_BCM2835=m +CONFIG_I2C_BCM2835=m +CONFIG_SPI_BCM2835=m +CONFIG_SPI_BCM2835AUX=m +CONFIG_BCM2835_WDT=m +CONFIG_SND_BCM2835_SOC_I2S=m +CONFIG_DRM_VC4=m +CONFIG_RASPBERRYPI_FIRMWARE=m + # Exynos CONFIG_ARCH_EXYNOS3=y # CONFIG_ARCH_EXYNOS4 is not set @@ -344,52 +361,15 @@ CONFIG_EXTCON_MAX8997=m # Tegra CONFIG_ARCH_TEGRA_114_SOC=y CONFIG_ARCH_TEGRA_124_SOC=y -CONFIG_ARM_TEGRA_CPUFREQ=y -CONFIG_TRUSTED_FOUNDATIONS=y -CONFIG_SERIAL_TEGRA=y -CONFIG_PCI_TEGRA=y -CONFIG_AHCI_TEGRA=m -CONFIG_TEGRA_IOMMU_SMMU=y -CONFIG_MMC_SDHCI_TEGRA=m -CONFIG_TEGRA_WATCHDOG=m -CONFIG_I2C_TEGRA=m -CONFIG_TEGRA_AHB=y -CONFIG_TEGRA20_APB_DMA=y -CONFIG_SPI_TEGRA114=m -CONFIG_PWM_TEGRA=m -CONFIG_KEYBOARD_TEGRA=m -CONFIG_USB_EHCI_TEGRA=m -CONFIG_RTC_DRV_TEGRA=m CONFIG_SND_SOC_TEGRA=m -CONFIG_SND_SOC_TEGRA_MAX98090=m -CONFIG_SND_SOC_TEGRA_RT5640=m CONFIG_SND_SOC_TEGRA30_AHUB=m CONFIG_SND_SOC_TEGRA30_I2S=m +CONFIG_SND_SOC_TEGRA_MAX98090=m +CONFIG_SND_SOC_TEGRA_RT5640=m CONFIG_SND_SOC_TEGRA_RT5677=m -CONFIG_SND_HDA_TEGRA=m -CONFIG_TEGRA_HOST1X=m -CONFIG_TEGRA_HOST1X_FIREWALL=y -CONFIG_DRM_TEGRA=m -CONFIG_DRM_TEGRA_FBDEV=y -# CONFIG_DRM_TEGRA_DEBUG is not set -CONFIG_DRM_TEGRA_STAGING=y -CONFIG_NOUVEAU_PLATFORM_DRIVER=y CONFIG_AD525X_DPOT=m CONFIG_AD525X_DPOT_I2C=m CONFIG_AD525X_DPOT_SPI=m -CONFIG_TEGRA_SOCTHERM=m -CONFIG_TEGRA_MC=y -CONFIG_TEGRA124_EMC=y -CONFIG_ARM_TEGRA_DEVFREQ=m -# CONFIG_ARM_TEGRA20_CPUFREQ is not set -CONFIG_ARM_TEGRA124_CPUFREQ=m - -# Jetson TK1 -CONFIG_PINCTRL_AS3722=y -CONFIG_POWER_RESET_AS3722=y -CONFIG_MFD_AS3722=y -CONFIG_REGULATOR_AS3722=m -CONFIG_RTC_DRV_AS3722=y # TI Generic CONFIG_TI_SOC_THERMAL=m @@ -853,18 +833,18 @@ CONFIG_R8188EU=m # CONFIG_SND_SOC_APQ8016_SBC is not set # CONFIG_SND_SOC_TAS571X is not set +# CONFIG_VFIO_PLATFORM_AMDXGBE_RESET is not set + +# Altera? +# CONFIG_PCIE_ALTERA is not set + # Debug options. We need to deal with them at some point like x86 # CONFIG_DEBUG_USER is not set -# CONFIG_DEBUG_LL is not set -# CONFIG_DEBUG_PINCTRL is not set # CONFIG_DMADEVICES_VDEBUG is not set # CONFIG_DMADEVICES_DEBUG is not set +# CONFIG_SERIAL_SAMSUNG_DEBUG is not set # CONFIG_OMAP2_DSS_DEBUG is not set # CONFIG_CRYPTO_DEV_UX500_DEBUG is not set # CONFIG_AB8500_DEBUG is not set # CONFIG_ARM_KERNMEM_PERMS is not set - -# CONFIG_VFIO_PLATFORM_AMDXGBE_RESET is not set - -# Altera? -# CONFIG_PCIE_ALTERA is not set +# CONFIG_DEBUG_LL is not set diff --git a/config-generic b/config-generic index 30f00b23b..1300bd015 100644 --- a/config-generic +++ b/config-generic @@ -1825,13 +1825,13 @@ CONFIG_B43_PCMCIA=y CONFIG_B43_SDIO=y CONFIG_B43_BCMA=y CONFIG_B43_BCMA_PIO=y -CONFIG_B43_DEBUG=y +# CONFIG_B43_DEBUG is not set CONFIG_B43_PHY_LP=y CONFIG_B43_PHY_N=y CONFIG_B43_PHY_HT=y CONFIG_B43_PHY_G=y CONFIG_B43LEGACY=m -CONFIG_B43LEGACY_DEBUG=y +# CONFIG_B43LEGACY_DEBUG is not set CONFIG_B43LEGACY_DMA=y CONFIG_B43LEGACY_PIO=y CONFIG_B43LEGACY_DMA_AND_PIO_MODE=y @@ -5132,7 +5132,7 @@ CONFIG_PM_DEBUG=y # CONFIG_DPM_WATCHDOG is not set # revisit this in debug CONFIG_PM_TRACE=y CONFIG_PM_TRACE_RTC=y -CONFIG_PM_TEST_SUSPEND=y +# CONFIG_PM_TEST_SUSPEND is not set # CONFIG_PM_OPP is not set # CONFIG_PM_AUTOSLEEP is not set # CONFIG_PM_WAKELOCKS is not set diff --git a/config-nodebug b/config-nodebug index 3a2eee381..c173637a2 100644 --- a/config-nodebug +++ b/config-nodebug @@ -2,101 +2,101 @@ CONFIG_SND_VERBOSE_PRINTK=y CONFIG_SND_DEBUG=y CONFIG_SND_PCM_XRUN_DEBUG=y -CONFIG_DEBUG_ATOMIC_SLEEP=y - -CONFIG_DEBUG_MUTEXES=y -CONFIG_DEBUG_RT_MUTEXES=y -CONFIG_DEBUG_LOCK_ALLOC=y -CONFIG_LOCK_TORTURE_TEST=m -CONFIG_PROVE_LOCKING=y -CONFIG_DEBUG_SPINLOCK=y -CONFIG_PROVE_RCU=y +# CONFIG_DEBUG_ATOMIC_SLEEP is not set + +# CONFIG_DEBUG_MUTEXES is not set +# CONFIG_DEBUG_RT_MUTEXES is not set +# CONFIG_DEBUG_LOCK_ALLOC is not set +# CONFIG_LOCK_TORTURE_TEST is not set +# CONFIG_PROVE_LOCKING is not set +# CONFIG_DEBUG_SPINLOCK is not set +# CONFIG_PROVE_RCU is not set # CONFIG_PROVE_RCU_REPEATEDLY is not set -CONFIG_DEBUG_PER_CPU_MAPS=y +# CONFIG_DEBUG_PER_CPU_MAPS is not set CONFIG_CPUMASK_OFFSTACK=y -CONFIG_CPU_NOTIFIER_ERROR_INJECT=m +# CONFIG_CPU_NOTIFIER_ERROR_INJECT is not set -CONFIG_FAULT_INJECTION=y -CONFIG_FAILSLAB=y -CONFIG_FAIL_PAGE_ALLOC=y -CONFIG_FAIL_MAKE_REQUEST=y -CONFIG_FAULT_INJECTION_DEBUG_FS=y -CONFIG_FAULT_INJECTION_STACKTRACE_FILTER=y -CONFIG_FAIL_IO_TIMEOUT=y -CONFIG_FAIL_MMC_REQUEST=y +# CONFIG_FAULT_INJECTION is not set +# CONFIG_FAILSLAB is not set +# CONFIG_FAIL_PAGE_ALLOC is not set +# CONFIG_FAIL_MAKE_REQUEST is not set +# CONFIG_FAULT_INJECTION_DEBUG_FS is not set +# CONFIG_FAULT_INJECTION_STACKTRACE_FILTER is not set +# CONFIG_FAIL_IO_TIMEOUT is not set +# CONFIG_FAIL_MMC_REQUEST is not set -CONFIG_LOCK_STAT=y +# CONFIG_LOCK_STAT is not set -CONFIG_DEBUG_STACK_USAGE=y +# CONFIG_DEBUG_STACK_USAGE is not set -CONFIG_ACPI_DEBUG=y +# CONFIG_ACPI_DEBUG is not set # CONFIG_ACPI_DEBUGGER is not set -CONFIG_DEBUG_SG=y -CONFIG_DEBUG_PI_LIST=y +# CONFIG_DEBUG_SG is not set +# CONFIG_DEBUG_PI_LIST is not set # CONFIG_PAGE_EXTENSION is not set # CONFIG_PAGE_OWNER is not set # CONFIG_DEBUG_PAGEALLOC is not set -CONFIG_DEBUG_OBJECTS=y +# CONFIG_DEBUG_OBJECTS is not set # CONFIG_DEBUG_OBJECTS_SELFTEST is not set -CONFIG_DEBUG_OBJECTS_FREE=y -CONFIG_DEBUG_OBJECTS_TIMERS=y -CONFIG_DEBUG_OBJECTS_RCU_HEAD=y +# CONFIG_DEBUG_OBJECTS_FREE is not set +# CONFIG_DEBUG_OBJECTS_TIMERS is not set +# CONFIG_DEBUG_OBJECTS_RCU_HEAD is not set CONFIG_DEBUG_OBJECTS_ENABLE_DEFAULT=1 CONFIG_X86_PTDUMP=y -CONFIG_ARM64_PTDUMP=y -CONFIG_EFI_PGT_DUMP=y +# CONFIG_ARM64_PTDUMP is not set +# CONFIG_EFI_PGT_DUMP is not set -CONFIG_CAN_DEBUG_DEVICES=y +# CONFIG_CAN_DEBUG_DEVICES is not set -CONFIG_MODULE_FORCE_UNLOAD=y +# CONFIG_MODULE_FORCE_UNLOAD is not set -CONFIG_DEBUG_NOTIFIERS=y +# CONFIG_DEBUG_NOTIFIERS is not set -CONFIG_DMA_API_DEBUG=y +# CONFIG_DMA_API_DEBUG is not set -CONFIG_MMIOTRACE=y +# CONFIG_MMIOTRACE is not set -CONFIG_DEBUG_CREDENTIALS=y +# CONFIG_DEBUG_CREDENTIALS is not set # off in both production debug and nodebug builds, # on in rawhide nodebug builds -CONFIG_DEBUG_FORCE_WEAK_PER_CPU=y +# CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set -CONFIG_EXT4_DEBUG=y +# CONFIG_EXT4_DEBUG is not set # CONFIG_XFS_WARN is not set -CONFIG_DEBUG_PERF_USE_VMALLOC=y +# CONFIG_DEBUG_PERF_USE_VMALLOC is not set -CONFIG_JBD2_DEBUG=y +# CONFIG_JBD2_DEBUG is not set -CONFIG_NFSD_FAULT_INJECTION=y +# CONFIG_NFSD_FAULT_INJECTION is not set -CONFIG_DEBUG_BLK_CGROUP=y +# CONFIG_DEBUG_BLK_CGROUP is not set -CONFIG_DRBD_FAULT_INJECTION=y +# CONFIG_DRBD_FAULT_INJECTION is not set -CONFIG_ATH_DEBUG=y -CONFIG_CARL9170_DEBUGFS=y -CONFIG_IWLWIFI_DEVICE_TRACING=y +# CONFIG_ATH_DEBUG is not set +# CONFIG_CARL9170_DEBUGFS is not set +# CONFIG_IWLWIFI_DEVICE_TRACING is not set # CONFIG_RTLWIFI_DEBUG is not set -CONFIG_DEBUG_OBJECTS_WORK=y +# CONFIG_DEBUG_OBJECTS_WORK is not set -CONFIG_DMADEVICES_DEBUG=y +# CONFIG_DMADEVICES_DEBUG is not set # CONFIG_DMADEVICES_VDEBUG is not set CONFIG_PM_ADVANCED_DEBUG=y -CONFIG_CEPH_LIB_PRETTYDEBUG=y -CONFIG_QUOTA_DEBUG=y +# CONFIG_CEPH_LIB_PRETTYDEBUG is not set +# CONFIG_QUOTA_DEBUG is not set CONFIG_KGDB_KDB=y @@ -104,19 +104,19 @@ CONFIG_KDB_DEFAULT_ENABLE=0x0 CONFIG_KDB_KEYBOARD=y CONFIG_KDB_CONTINUE_CATASTROPHIC=0 -CONFIG_DEBUG_OBJECTS_PERCPU_COUNTER=y +# CONFIG_DEBUG_OBJECTS_PERCPU_COUNTER is not set # CONFIG_PERCPU_TEST is not set -CONFIG_TEST_LIST_SORT=y +# CONFIG_TEST_LIST_SORT is not set # CONFIG_TEST_STRING_HELPERS is not set -CONFIG_DETECT_HUNG_TASK=y +# CONFIG_DETECT_HUNG_TASK is not set CONFIG_DEFAULT_HUNG_TASK_TIMEOUT=120 # CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set -CONFIG_WQ_WATCHDOG=y +# CONFIG_WQ_WATCHDOG is not set -CONFIG_X86_BOOTPARAM_MEMORY_CORRUPTION_CHECK=y +# CONFIG_X86_BOOTPARAM_MEMORY_CORRUPTION_CHECK is not set -CONFIG_DEBUG_KMEMLEAK=y +# CONFIG_DEBUG_KMEMLEAK is not set CONFIG_DEBUG_KMEMLEAK_EARLY_LOG_SIZE=1024 # CONFIG_DEBUG_KMEMLEAK_TEST is not set CONFIG_DEBUG_KMEMLEAK_DEFAULT_OFF=y @@ -127,4 +127,4 @@ CONFIG_DEBUG_KMEMLEAK_DEFAULT_OFF=y # CONFIG_SPI_DEBUG is not set -CONFIG_X86_DEBUG_STATIC_CPU_HAS=y +# CONFIG_X86_DEBUG_STATIC_CPU_HAS is not set diff --git a/config-x86-generic b/config-x86-generic index 33b55f3a1..f54836a6d 100644 --- a/config-x86-generic +++ b/config-x86-generic @@ -377,7 +377,7 @@ CONFIG_SP5100_TCO=m # CONFIG_MEMTEST is not set # CONFIG_DEBUG_TLBFLUSH is not set -CONFIG_MAXSMP=y +# CONFIG_MAXSMP is not set CONFIG_HP_ILO=m @@ -1 +1 @@ -e3c2ef41f88e50c8557270868600d3132028af3b +f6cede5b49e822ebc41a099fe41ab4989f64e2cb diff --git a/kernel.spec b/kernel.spec index cf6d91214..51d5afcff 100644 --- a/kernel.spec +++ b/kernel.spec @@ -42,7 +42,7 @@ Summary: The Linux kernel # For non-released -rc kernels, this will be appended after the rcX and # gitX tags, so a 3 here would become part of release "0.rcX.gitX.3" # -%global baserelease 1 +%global baserelease 2 %global fedora_build %{baserelease} # base_sublevel is the kernel version we're starting with and patching @@ -73,9 +73,9 @@ Summary: The Linux kernel # The next upstream release sublevel (base_sublevel+1) %define upstream_sublevel %(echo $((%{base_sublevel} + 1))) # The rc snapshot level -%define rcrev 6 +%define rcrev 7 # The git snapshot level -%define gitrev 3 +%define gitrev 0 # Set rpm version accordingly %define rpmversion 4.%{upstream_sublevel}.0 %endif @@ -131,7 +131,7 @@ Summary: The Linux kernel # Set debugbuildsenabled to 1 for production (build separate debug kernels) # and 0 for rawhide (all kernels are debug kernels). # See also 'make debug' and 'make release'. -%define debugbuildsenabled 0 +%define debugbuildsenabled 1 # Want to build a vanilla kernel build without any non-upstream patches? %define with_vanilla %{?_without_vanilla: 0} %{?!_without_vanilla: 1} @@ -523,6 +523,17 @@ Patch456: arm64-acpi-drop-expert-patch.patch # http://patchwork.ozlabs.org/patch/587554/ Patch457: ARM-tegra-usb-no-reset.patch +Patch458: ARM-mvebu-change-order-of-ethernet-DT-nodes-on-Armada-38x.patch + +# http://www.spinics.net/lists/arm-kernel/msg480703.html +Patch459: Geekbox-device-tree-support.patch + +# http://www.spinics.net/lists/arm-kernel/msg483898.html +Patch460: Initial-AllWinner-A64-and-PINE64-support.patch + +# http://www.spinics.net/lists/linux-tegra/msg25152.html +Patch461: Fix-tegra-to-use-stdout-path-for-serial-console.patch + Patch463: arm-i.MX6-Utilite-device-dtb.patch Patch466: input-kill-stupid-messages.patch @@ -2147,6 +2158,19 @@ fi # # %changelog +* Mon Mar 7 2016 Peter Robinson <pbrobinson@fedoraproject.org> 4.5.0-0.rc7.git0.2 +- Disble ARM_PATCH_IDIV as a work around to fix rhbz 1303147 + +* Mon Mar 07 2016 Justin M. Forbes <jforbes@fedoraproject.org> - 4.5.0-0.rc7.git0.1 +- Disable debugging options. +- Linux v4.5-rc7 + +* Sat Mar 5 2016 Peter Robinson <pbrobinson@fedoraproject.org> +- Updates and new SoCs for aarch64 and ARMv7 +- Add aarch64 support for PINE64 and Geekbox devices +- Fix ethernet naming on Armada 38x devices +- Serial console fixes for Tegra + * Fri Mar 04 2016 Justin M. Forbes <jforbes@fedoraproject.org> - 4.5.0-0.rc6.git3.1 - Linux v4.5-rc6-41-ge3c2ef4 @@ -1,4 +1,3 @@ 9a78fa2eb6c68ca5a40ed5af08142599 linux-4.4.tar.xz dcbc8fe378a676d5d0dd208cf524e144 perf-man-4.4.tar.gz -cb386089b7af5ea8eab95b5975142529 patch-4.5-rc6.xz -70db20ea509a88291b90141d5755b57d patch-4.5-rc6-git3.xz +78a23c8a117f99bbe8f45bdd0183cf18 patch-4.5-rc7.xz |