summaryrefslogtreecommitdiffstats
diff options
context:
space:
mode:
authorKyle McMartin <kmcmarti@redhat.com>2014-08-05 10:24:31 -0400
committerKyle McMartin <kmcmarti@redhat.com>2014-08-05 10:24:31 -0400
commitd2b85a675da297656fe1fc09f93da2ae7f73e6e1 (patch)
treee19086a0029f68be8ef572ee8377582386b736b1
parent10100651485257bf28bc98647e491bb90631b030 (diff)
downloadkernel-d2b85a675da297656fe1fc09f93da2ae7f73e6e1.tar.gz
kernel-d2b85a675da297656fe1fc09f93da2ae7f73e6e1.tar.xz
kernel-d2b85a675da297656fe1fc09f93da2ae7f73e6e1.zip
kernel-arm64.patch: fix up merge conflict and re-enable
-rw-r--r--kernel-arm64.patch3266
-rw-r--r--kernel.spec5
2 files changed, 103 insertions, 3168 deletions
diff --git a/kernel-arm64.patch b/kernel-arm64.patch
index 25f0479c8..6fb01f64c 100644
--- a/kernel-arm64.patch
+++ b/kernel-arm64.patch
@@ -1,969 +1,8 @@
-commit db044807ca763c21bae298388239be6177c6ccec
-Merge: 649c9e3 26bcd8b
-Author: Kyle McMartin <kmcmarti@redhat.com>
-Date: Wed Jul 30 14:31:24 2014 -0400
-
- Merge branch 'master' into devel
-
- Conflicts:
- virt/kvm/arm/vgic.c
-
-commit 649c9e3a45e81852daf80c126a332297b75cb109
-Author: Ard Biesheuvel <ard.biesheuvel@linaro.org>
-Date: Tue Jul 29 12:49:10 2014 +0200
-
- arm64/efi: efistub: don't abort if base of DRAM is occupied
-
- If we cannot relocate the kernel Image to its preferred offset of base of DRAM
- plus TEXT_OFFSET, instead relocate it to the lowest available 2 MB boundary plus
- TEXT_OFFSET. We may lose a bit of memory at the low end, but we can still
- proceed normally otherwise.
-
- Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
-
-commit 5102fd06b12467a0518537061805483a759bc856
-Author: Ard Biesheuvel <ard.biesheuvel@linaro.org>
-Date: Tue Jul 29 12:49:09 2014 +0200
-
- arm64/efi: efistub: cover entire static mem footprint in PE/COFF .text
-
- The static memory footprint of a kernel Image at boot is larger than the
- Image file itself. Things like .bss data and initial page tables are allocated
- statically but populated dynamically so their content is not contained in the
- Image file.
-
- However, if EFI (or GRUB) has loaded the Image at precisely the desired offset
- of base of DRAM + TEXT_OFFSET, the Image will be booted in place, and we have
- to make sure that the allocation done by the PE/COFF loader is large enough.
-
- Fix this by growing the PE/COFF .text section to cover the entire static
- memory footprint. The part of the section that is not covered by the payload
- will be zero initialised by the PE/COFF loader.
-
- Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
-
-commit 3b4dfb00a401b7fecf01d3c89b154907167dff52
-Author: Mark Rutland <mark.rutland@arm.com>
-Date: Tue Jul 29 12:49:08 2014 +0200
-
- arm64: spin-table: handle unmapped cpu-release-addrs
-
- In certain cases the cpu-release-addr of a CPU may not fall in the
- linear mapping (e.g. when the kernel is loaded above this address due to
- the presence of other images in memory). This is problematic for the
- spin-table code as it assumes that it can trivially convert a
- cpu-release-addr to a valid VA in the linear map.
-
- This patch modifies the spin-table code to use a temporary cached
- mapping to write to a given cpu-release-addr, enabling us to support
- addresses regardless of whether they are covered by the linear mapping.
-
- Signed-off-by: Mark Rutland <mark.rutland@arm.com>
-
-commit a49ad891b2e91338587dc5576c9da73b249a9d13
-Author: Mark Salter <msalter@redhat.com>
-Date: Mon Jul 14 15:52:06 2014 -0400
-
- pci/xgene: use pci_remap_iospace() instead of pci_ioremap_io()
-
- Signed-off-by: Mark Salter <msalter@redhat.com>
-
-commit 1a958ec71db226d35ed51756b7164142bb0a60a3
-Author: Tanmay Inamdar <tinamdar@apm.com>
-Date: Wed Mar 19 16:12:42 2014 -0700
-
- MAINTAINERS: entry for APM X-Gene PCIe host driver
-
- Add entry for AppliedMicro X-Gene PCIe host driver.
-
- Signed-off-by: Tanmay Inamdar <tinamdar@apm.com>
-
-commit 03dc92f35b8f8be898ca12e3dc7c15961f414907
-Author: Tanmay Inamdar <tinamdar@apm.com>
-Date: Wed Mar 19 16:12:41 2014 -0700
-
- dt-bindings: pci: xgene pcie device tree bindings
-
- This patch adds the bindings for X-Gene PCIe driver. The driver resides
- under 'drivers/pci/host/pci-xgene.c' file.
-
- Signed-off-by: Tanmay Inamdar <tinamdar@apm.com>
-
-commit 1f8d894f2066d9db2b251d512f6f6f772ae7147f
-Author: Tanmay Inamdar <tinamdar@apm.com>
-Date: Wed Mar 19 16:12:40 2014 -0700
-
- arm64: dts: APM X-Gene PCIe device tree nodes
-
- This patch adds the device tree nodes for APM X-Gene PCIe controller and
- PCIe clock interface. Since X-Gene SOC supports maximum 5 ports, 5 dts
- nodes are added.
-
- Signed-off-by: Tanmay Inamdar <tinamdar@apm.com>
-
-commit c0855fcf0cc9adcb1ba5e6b1318536c56244796d
-Author: Tanmay Inamdar <tinamdar@apm.com>
-Date: Wed Mar 19 16:12:39 2014 -0700
-
- pci: APM X-Gene PCIe controller driver
-
- This patch adds the AppliedMicro X-Gene SOC PCIe controller driver.
- X-Gene PCIe controller supports maximum up to 8 lanes and GEN3 speed.
- X-Gene SOC supports maximum 5 PCIe ports.
-
- Signed-off-by: Tanmay Inamdar <tinamdar@apm.com>
-
-commit 1cc0c322237d3b58b08fe39e79e6c2e2f90a8c98
-Author: Liviu Dudau <Liviu.Dudau@arm.com>
-Date: Tue Jul 1 19:44:00 2014 +0100
-
- arm64: Add architectural support for PCI
-
- Use the generic host bridge functions to provide support for
- PCI Express on arm64.
-
- Signed-off-by: Liviu Dudau <Liviu.Dudau@arm.com>
-
-commit aba1eca911a87959eb4be515110f7a6b8692e9a4
-Author: Liviu Dudau <Liviu.Dudau@arm.com>
-Date: Tue Jul 1 19:43:34 2014 +0100
-
- pci: Remap I/O bus resources into CPU space with pci_remap_iospace()
-
- Introduce a default implementation for remapping PCI bus I/O resources
- onto the CPU address space. Architectures with special needs may
- provide their own version, but most should be able to use this one.
-
- Signed-off-by: Liviu Dudau <Liviu.Dudau@arm.com>
-
-commit e1eacc3da10ca19eff1f88fb342a13586092b613
-Author: Liviu Dudau <liviu@dudau.co.uk>
-Date: Tue Jul 1 21:50:50 2014 +0100
-
- pci: Add support for creating a generic host_bridge from device tree
-
- Several platforms use a rather generic version of parsing
- the device tree to find the host bridge ranges. Move the common code
- into the generic PCI code and use it to create a pci_host_bridge
- structure that can be used by arch code.
-
- Based on early attempts by Andrew Murray to unify the code.
- Used powerpc and microblaze PCI code as starting point.
-
- Signed-off-by: Liviu Dudau <Liviu.Dudau@arm.com>
- Tested-by: Tanmay Inamdar <tinamdar@apm.com>
-
-commit aee55d507eb451223b51b52e6617b06b8e518ea6
-Author: Liviu Dudau <Liviu.Dudau@arm.com>
-Date: Tue Jul 1 19:43:32 2014 +0100
-
- pci: of: Parse and map the IRQ when adding the PCI device.
-
- Enhance the default implementation of pcibios_add_device() to
- parse and map the IRQ of the device if a DT binding is available.
-
- Signed-off-by: Liviu Dudau <Liviu.Dudau@arm.com>
-
-commit 0cf0470962f0498b598ff44e0c671407df54b22e
-Author: Liviu Dudau <Liviu.Dudau@arm.com>
-Date: Tue Jul 1 19:43:31 2014 +0100
-
- pci: Introduce a domain number for pci_host_bridge.
-
- Make it easier to discover the domain number of a bus by storing
- the number in pci_host_bridge for the root bus. Several architectures
- have their own way of storing this information, so it makes sense
- to try to unify the code. While at this, add a new function that
- creates a root bus in a given domain and make pci_create_root_bus()
- a wrapper around this function.
-
- Signed-off-by: Liviu Dudau <Liviu.Dudau@arm.com>
- Tested-by: Tanmay Inamdar <tinamdar@apm.com>
-
-commit 1bc8fcf01469c202b4aea5f1d0a3a75c9302f3e2
-Author: Liviu Dudau <Liviu.Dudau@arm.com>
-Date: Tue Jul 1 19:43:30 2014 +0100
-
- pci: Create pci_host_bridge before its associated bus in pci_create_root_bus.
-
- Before commit 7b5436635800 the pci_host_bridge was created before the root bus.
- As that commit has added a needless dependency on the bus for pci_alloc_host_bridge()
- the creation order has been changed for no good reason. Revert the order of
- creation as we are going to depend on the pci_host_bridge structure to retrieve the
- domain number of the root bus.
-
- Signed-off-by: Liviu Dudau <Liviu.Dudau@arm.com>
- Acked-by: Grant Likely <grant.likely@linaro.org>
- Tested-by: Tanmay Inamdar <tinamdar@apm.com>
-
-commit 55353327169dc08c1047d994e00b8a38630f5a8d
-Author: Liviu Dudau <Liviu.Dudau@arm.com>
-Date: Tue Jul 1 19:43:29 2014 +0100
-
- pci: OF: Fix the conversion of IO ranges into IO resources.
-
- The ranges property for a host bridge controller in DT describes
- the mapping between the PCI bus address and the CPU physical address.
- The resources framework however expects that the IO resources start
- at a pseudo "port" address 0 (zero) and have a maximum size of IO_SPACE_LIMIT.
- The conversion from pci ranges to resources failed to take that into account.
-
- In the process move the function into drivers/of/address.c as it now
- depends on pci_address_to_pio() code and make it return an error message.
-
- Signed-off-by: Liviu Dudau <Liviu.Dudau@arm.com>
- Tested-by: Tanmay Inamdar <tinamdar@apm.com>
-
-commit 34079a20796d5c74e2984c37a99baef4871709a6
-Author: Liviu Dudau <Liviu.Dudau@arm.com>
-Date: Tue Jul 1 19:43:28 2014 +0100
-
- pci: Introduce pci_register_io_range() helper function.
-
- Some architectures do not have a simple view of the PCI I/O space
- and instead use a range of CPU addresses that map to bus addresses. For
- some architectures these ranges will be expressed by OF bindings
- in a device tree file.
-
- Introduce a pci_register_io_range() helper function with a generic
- implementation that can be used by such architectures to keep track
- of the I/O ranges described by the PCI bindings. If the PCI_IOBASE
- macro is not defined that signals lack of support for PCI and we
- return an error.
-
- Signed-off-by: Liviu Dudau <Liviu.Dudau@arm.com>
-
-commit a81abc095ab4b9b90e446ddbd59247e23df9d4ad
-Author: Liviu Dudau <Liviu.Dudau@arm.com>
-Date: Tue Jul 1 19:43:27 2014 +0100
-
- pci: Export find_pci_host_bridge() function.
-
- This is a useful function and we should make it visible outside the
- generic PCI code. Export it as a GPL symbol.
-
- Signed-off-by: Liviu Dudau <Liviu.Dudau@arm.com>
- Tested-by: Tanmay Inamdar <tinamdar@apm.com>
-
-commit 78361698444e81bedbf30ec2b7aae1afd110d11f
-Author: Liviu Dudau <Liviu.Dudau@arm.com>
-Date: Tue Jul 1 19:43:26 2014 +0100
-
- Fix ioport_map() for !CONFIG_GENERIC_IOMAP cases.
-
- The inline version of ioport_map() that gets used when !CONFIG_GENERIC_IOMAP
- is wrong. It returns a mapped (i.e. virtual) address that can start from
- zero and completely ignores the PCI_IOBASE and IO_SPACE_LIMIT that most
- architectures that use !CONFIG_GENERIC_MAP define.
-
- Signed-off-by: Liviu Dudau <Liviu.Dudau@arm.com>
- Acked-by: Arnd Bergmann <arnd@arndb.de>
- Tested-by: Tanmay Inamdar <tinamdar@apm.com>
-
-commit 5540bbe2eca72e37be2e6a1c18e2fc7e73f0eab6
-Author: Marc Zyngier <marc.zyngier@arm.com>
-Date: Mon Jun 30 16:01:50 2014 +0100
-
- arm64: KVM: vgic: enable GICv2 emulation on top on GICv3 hardware
-
- Add the last missing bits that enable GICv2 emulation on top of
- GICv3 hardware.
-
- Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
-
-commit f057aaf81a7df641bcaa992965a257e3260ad36e
-Author: Marc Zyngier <marc.zyngier@arm.com>
-Date: Mon Jun 30 16:01:49 2014 +0100
-
- arm64: KVM: vgic: add GICv3 world switch
-
- Introduce the GICv3 world switch code used to save/restore the
- GICv3 context.
-
- Acked-by: Catalin Marinas <catalin.marinas@arm.com>
- Reviewed-by: Christoffer Dall <christoffer.dall@linaro.org>
- Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
-
-commit 7f1b8a791bb375933fdc8420cd08f127d07dd259
-Author: Marc Zyngier <marc.zyngier@arm.com>
-Date: Mon Jun 30 16:01:48 2014 +0100
-
- KVM: ARM: vgic: add the GICv3 backend
-
- Introduce the support code for emulating a GICv2 on top of GICv3
- hardware.
-
- Acked-by: Catalin Marinas <catalin.marinas@arm.com>
- Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
-
-commit 74428905c3b450eab53a21bee74236501629a443
-Author: Marc Zyngier <marc.zyngier@arm.com>
-Date: Mon Jun 30 16:01:47 2014 +0100
-
- arm64: KVM: move HCR_EL2.{IMO, FMO} manipulation into the vgic switch code
-
- GICv3 requires the IMO and FMO bits to be tightly coupled with some
- of the interrupt controller's register switch.
-
- In order to have similar code paths, move the manipulation of these
- bits to the GICv2 switch code.
-
- Acked-by: Catalin Marinas <catalin.marinas@arm.com>
- Reviewed-by: Christoffer Dall <christoffer.dall@linaro.org>
- Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
-
-commit b691c1f97f1fb5b29c3ae4cc836fdbefe61a11ff
-Author: Marc Zyngier <marc.zyngier@arm.com>
-Date: Mon Jun 30 16:01:46 2014 +0100
-
- arm64: KVM: split GICv2 world switch from hyp code
-
- Move the GICv2 world switch code into its own file, and add the
- necessary indirection to the arm64 switch code.
-
- Also introduce a new type field to the vgic_params structure.
-
- Acked-by: Catalin Marinas <catalin.marinas@arm.com>
- Reviewed-by: Christoffer Dall <christoffer.dall@linaro.org>
- Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
-
-commit d3f4563f1bebed7f60f714bdab640e477a081c4b
-Author: Marc Zyngier <marc.zyngier@arm.com>
-Date: Mon Jun 30 16:01:45 2014 +0100
-
- arm64: KVM: remove __kvm_hyp_code_{start, end} from hyp.S
-
- We already have __hyp_text_{start,end} to express the boundaries
- of the HYP text section, and __kvm_hyp_code_{start,end} are getting
- in the way of a more modular world switch code.
-
- Just turn __kvm_hyp_code_{start,end} into #defines mapping the
- linker-emited symbols.
-
- Acked-by: Catalin Marinas <catalin.marinas@arm.com>
- Reviewed-by: Christoffer Dall <christoffer.dall@linaro.org>
- Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
-
-commit 8ede261e09ad25ab8229d5efb476d5b4f6dc6434
-Author: Marc Zyngier <marc.zyngier@arm.com>
-Date: Mon Jun 30 16:01:44 2014 +0100
-
- KVM: ARM: vgic: revisit implementation of irqchip_in_kernel
-
- So far, irqchip_in_kernel() was implemented by testing the value of
- vctrl_base, which worked fine with GICv2.
-
- With GICv3, this field is useless, as we're using system registers
- instead of a emmory mapped interface. To solve this, add a boolean
- flag indicating if the we're using a vgic or not.
-
- Reviewed-by: Christoffer Dall <christoffer.dall@linaro.org>
- Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
-
-commit ff7faf70feb47e5f1cf1e0f0d02e0f2807da11f5
-Author: Marc Zyngier <marc.zyngier@arm.com>
-Date: Mon Jun 30 16:01:43 2014 +0100
-
- KVM: ARM: vgic: split GICv2 backend from the main vgic code
-
- Brutally hack the innocent vgic code, and move the GICv2 specific code
- to its own file, using vgic_ops and vgic_params as a way to pass
- information between the two blocks.
-
- Acked-by: Catalin Marinas <catalin.marinas@arm.com>
- Reviewed-by: Christoffer Dall <christoffer.dall@linaro.org>
- Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
-
-commit 63480283c0e1dc92f506e5e5306be0ac9b239499
-Author: Marc Zyngier <marc.zyngier@arm.com>
-Date: Mon Jun 30 16:01:42 2014 +0100
-
- KVM: ARM: introduce vgic_params structure
-
- Move all the data specific to a given GIC implementation into its own
- little structure.
-
- Acked-by: Catalin Marinas <catalin.marinas@arm.com>
- Reviewed-by: Christoffer Dall <christoffer.dall@linaro.org>
- Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
-
-commit dcb20f9b66d5615a3e7e492424fa7953c1fe9f01
-Author: Marc Zyngier <marc.zyngier@arm.com>
-Date: Mon Jun 30 16:01:41 2014 +0100
-
- KVM: ARM: vgic: introduce vgic_enable
-
- Move the code dealing with enabling the VGIC on to vgic_ops.
-
- Acked-by: Catalin Marinas <catalin.marinas@arm.com>
- Reviewed-by: Christoffer Dall <christoffer.dall@linaro.org>
- Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
-
-commit 67e3bcf8dd823eec79c74bc993fa62fb08b1acea
-Author: Marc Zyngier <marc.zyngier@arm.com>
-Date: Mon Jun 30 16:01:40 2014 +0100
-
- KVM: ARM: vgic: abstract VMCR access
-
- Instead of directly messing with with the GICH_VMCR bits for the CPU
- interface save/restore code, add accessors that encode/decode the
- entire set of registers exposed by VMCR.
-
- Not the most efficient thing, but given that this code is only used
- by the save/restore code, performance is far from being critical.
-
- Reviewed-by: Christoffer Dall <christoffer.dall@linaro.org>
- Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
-
-commit 67caf34f138a4f2516a2afcd5657add2eaaf0ab4
-Author: Marc Zyngier <marc.zyngier@arm.com>
-Date: Mon Jun 30 16:01:39 2014 +0100
-
- KVM: ARM: vgic: move underflow handling to vgic_ops
-
- Move the code dealing with LR underflow handling to its own functions,
- and make them accessible through vgic_ops.
-
- Acked-by: Catalin Marinas <catalin.marinas@arm.com>
- Reviewed-by: Christoffer Dall <christoffer.dall@linaro.org>
- Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
-
-commit 30acb0a340d388135ae89bed7e248bad203ec876
-Author: Marc Zyngier <marc.zyngier@arm.com>
-Date: Mon Jun 30 16:01:38 2014 +0100
-
- KVM: ARM: vgic: abstract MISR decoding
-
- Instead of directly dealing with the GICH_MISR bits, move the code to
- its own function and use a couple of public flags to represent the
- actual state.
-
- Acked-by: Catalin Marinas <catalin.marinas@arm.com>
- Reviewed-by: Christoffer Dall <christoffer.dall@linaro.org>
- Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
-
-commit 464cbe47011e07b654d161ab4d4bdd05b4d025b3
-Author: Marc Zyngier <marc.zyngier@arm.com>
-Date: Mon Jun 30 16:01:37 2014 +0100
-
- KVM: ARM: vgic: abstract EISR bitmap access
-
- Move the GICH_EISR access to its own function.
-
- Acked-by: Catalin Marinas <catalin.marinas@arm.com>
- Reviewed-by: Christoffer Dall <christoffer.dall@linaro.org>
- Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
-
-commit 33930dc5f401e9fc2268c2f128853eb5275e7ab1
-Author: Marc Zyngier <marc.zyngier@arm.com>
-Date: Mon Jun 30 16:01:36 2014 +0100
-
- KVM: ARM: vgic: abstract access to the ELRSR bitmap
-
- Move the GICH_ELRSR access to its own functions, and add them to
- the vgic_ops structure.
-
- Acked-by: Catalin Marinas <catalin.marinas@arm.com>
- Reviewed-by: Christoffer Dall <christoffer.dall@linaro.org>
- Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
-
-commit 0dca962ccd5b96fb7174880c1bc25085dcc09927
-Author: Marc Zyngier <marc.zyngier@arm.com>
-Date: Mon Jun 30 16:01:35 2014 +0100
-
- KVM: ARM: vgic: introduce vgic_ops and LR manipulation primitives
-
- In order to split the various register manipulation from the main vgic
- code, introduce a vgic_ops structure, and start by abstracting the
- LR manipulation code with a couple of accessors.
-
- Reviewed-by: Christoffer Dall <christoffer.dall@linaro.org>
- Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
-
-commit e66aa6cbdaa25764c58ba8d21da8d1b7d75e7570
-Author: Marc Zyngier <marc.zyngier@arm.com>
-Date: Mon Jun 30 16:01:34 2014 +0100
-
- KVM: arm/arm64: vgic: move GICv2 registers to their own structure
-
- In order to make way for the GICv3 registers, move the v2-specific
- registers to their own structure.
-
- Acked-by: Catalin Marinas <catalin.marinas@arm.com>
- Reviewed-by: Christoffer Dall <christoffer.dall@linaro.org>
- Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
-
-commit b04259737c6bb38592c02c93e939fd53909dad04
-Author: Marc Zyngier <marc.zyngier@arm.com>
-Date: Mon Jun 30 16:01:33 2014 +0100
-
- arm64: boot protocol documentation update for GICv3
-
- Linux has some requirements that must be satisfied in order to boot
- on a system built with a GICv3.
-
- Acked-by: Christoffer Dall <christoffer.dall@linaro.org>
- Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
-
-commit a864693311bd4305214d966b7ca0e0015216c2c4
-Author: Marc Zyngier <marc.zyngier@arm.com>
-Date: Mon Jun 30 16:01:32 2014 +0100
-
- arm64: GICv3 device tree binding documentation
-
- Add the necessary documentation to support GICv3.
-
- Cc: Thomas Gleixner <tglx@linutronix.de>
- Cc: Mark Rutland <mark.rutland@arm.com>
- Acked-by: Catalin Marinas <catalin.marinas@arm.com>
- Acked-by: Rob Herring <robh@kernel.org>
- Acked-by: Christoffer Dall <christoffer.dall@linaro.org>
- Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
-
-commit af3035d3ddddb6e19bac9295f0c785bb2c8e718c
-Author: Marc Zyngier <marc.zyngier@arm.com>
-Date: Mon Jun 30 16:01:31 2014 +0100
-
- irqchip: arm64: Initial support for GICv3
-
- The Generic Interrupt Controller (version 3) offers services that are
- similar to GICv2, with a number of additional features:
- - Affinity routing based on the CPU MPIDR (ARE)
- - System register for the CPU interfaces (SRE)
- - Support for more that 8 CPUs
- - Locality-specific Peripheral Interrupts (LPIs)
- - Interrupt Translation Services (ITS)
-
- This patch adds preliminary support for GICv3 with ARE and SRE,
- non-secure mode only. It relies on higher exception levels to grant ARE
- and SRE access.
-
- Support for LPI and ITS will be added at a later time.
-
- Cc: Thomas Gleixner <tglx@linutronix.de>
- Cc: Jason Cooper <jason@lakedaemon.net>
- Reviewed-by: Zi Shen Lim <zlim@broadcom.com>
- Reviewed-by: Christoffer Dall <christoffer.dall@linaro.org>
- Reviewed-by: Tirumalesh Chalamarla <tchalamarla@cavium.com>
- Reviewed-by: Yun Wu <wuyun.wu@huawei.com>
- Reviewed-by: Zhen Lei <thunder.leizhen@huawei.com>
- Tested-by: Tirumalesh Chalamarla<tchalamarla@cavium.com>
- Tested-by: Radha Mohan Chintakuntla <rchintakuntla@cavium.com>
- Acked-by: Radha Mohan Chintakuntla <rchintakuntla@cavium.com>
- Acked-by: Catalin Marinas <catalin.marinas@arm.com>
- Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
-
-commit c50b02761c3ad5d37ce8fffe7c0bf6b46d23109e
-Author: Marc Zyngier <marc.zyngier@arm.com>
-Date: Mon Jun 30 16:01:30 2014 +0100
-
- irqchip: ARM: GIC: Move some bits of GICv2 to a library-type file
-
- A few GICv2 low-level function are actually very useful to GICv3,
- and it makes some sense to share them across the two drivers.
- They end-up in their own file, with an additional parameter used
- to ensure an optional synchronization (unused on GICv2).
-
- Cc: Thomas Gleixner <tglx@linutronix.de>
- Cc: Jason Cooper <jason@lakedaemon.net>
- Acked-by: Christoffer Dall <christoffer.dall@linaro.org>
- Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
-
-commit 6a6033cdcbf6022c2848e2181ed6d8b7545af02e
-Author: Mark Salter <msalter@redhat.com>
-Date: Tue Jun 24 23:16:45 2014 -0400
-
- perf: fix arm64 build error
-
- I'm seeing the following build error on arm64:
-
- In file included from util/event.c:3:0:
- util/event.h:95:17: error: 'PERF_REGS_MAX' undeclared here (not in a function)
- u64 cache_regs[PERF_REGS_MAX];
- ^
-
- This patch adds a PEFF_REGS_MAX definition for arm64.
-
- Signed-off-by: Mark Salter <msalter@redhat.com>
-
-commit 1de8987fa549d421576c1b61282c4041c8c78a5f
-Author: Mark Salter <msalter@redhat.com>
-Date: Tue Jun 24 09:50:28 2014 -0400
-
- arm64: use EFI as last resort for reboot and poweroff
-
- Wire in support for EFI reboot and poweroff functions. We use these
- only if no other mechanism has been registered with arm_pm_reboot
- and/or pm_power_off respectively.
-
- Signed-off-by: Mark Salter <msalter@redhat.com>
-
-commit 1c973051e86625be7ffb3db90d4a70b9ca4199c6
-Author: Matt Fleming <matt.fleming@intel.com>
-Date: Fri Jun 13 12:39:55 2014 +0100
-
- x86/reboot: Add EFI reboot quirk for ACPI Hardware Reduced flag
-
- It appears that the BayTrail-T class of hardware requires EFI in order
- to powerdown and reboot and no other reliable method exists.
-
- This quirk is generally applicable to all hardware that has the ACPI
- Hardware Reduced bit set, since usually ACPI would be the preferred
- method.
-
- Cc: Len Brown <len.brown@intel.com>
- Cc: Mark Salter <msalter@redhat.com>
- Cc: "Rafael J. Wysocki" <rafael.j.wysocki@intel.com>
- Signed-off-by: Matt Fleming <matt.fleming@intel.com>
-
-commit 621b2a0f1df86bd2f147799303b94575f3acee95
-Author: Matt Fleming <matt.fleming@intel.com>
-Date: Fri Jun 13 12:35:21 2014 +0100
-
- efi/reboot: Allow powering off machines using EFI
-
- Not only can EfiResetSystem() be used to reboot, it can also be used to
- power down machines.
-
- By and large, this functionality doesn't work very well across the range
- of EFI machines in the wild, so it should definitely only be used as a
- last resort. In an ideal world, this wouldn't be needed at all.
-
- Unfortunately, we're starting to see machines where EFI is the *only*
- reliable way to power down, and nothing else, not PCI, not ACPI, works.
-
- efi_poweroff_required() should be implemented on a per-architecture
- basis, since exactly when we should be using EFI runtime services is a
- platform-specific decision. There's no analogue for reboot because each
- architecture handles reboot very differently - the x86 code in
- particular is pretty complex.
-
- Patches to enable this for specific classes of hardware will be
- submitted separately.
-
- Cc: Mark Salter <msalter@redhat.com>
- Signed-off-by: Matt Fleming <matt.fleming@intel.com>
-
-commit 6b2e219b20933cad5d5ba34f7af4efc5317c0fb9
-Author: Matt Fleming <matt.fleming@intel.com>
-Date: Fri Jun 13 12:22:22 2014 +0100
-
- efi/reboot: Add generic wrapper around EfiResetSystem()
-
- Implement efi_reboot(), which is really just a wrapper around the
- EfiResetSystem() EFI runtime service, but it does at least allow us to
- funnel all callers through a single location.
-
- It also simplifies the callsites since users no longer need to check to
- see whether EFI_RUNTIME_SERVICES are enabled.
-
- Cc: Tony Luck <tony.luck@intel.com>
- Cc: Mark Salter <msalter@redhat.com>
- Signed-off-by: Matt Fleming <matt.fleming@intel.com>
-
-commit d0d41b99122d97f81ad05868dff38ccf0a3ffd33
-Author: Saurabh Tangri <saurabh.tangri@intel.com>
-Date: Mon Jun 2 05:18:35 2014 -0700
-
- x86/efi: Move all workarounds to a separate file quirks.c
-
- Currently, it's difficult to find all the workarounds that are
- applied when running on EFI, because they're littered throughout
- various code paths. This change moves all of them into a separate
- file with the hope that it will be come the single location for all
- our well documented quirks.
-
- Signed-off-by: Saurabh Tangri <saurabh.tangri@intel.com>
- Signed-off-by: Matt Fleming <matt.fleming@intel.com>
-
-commit b5e3a1e8825abb0406ead0e85436df4df20ddcdb
-Author: Don Dutile <ddutile@redhat.com>
-Date: Tue Mar 25 20:22:26 2014 -0400
-
- pmu: Adding support for Xgene PMUs
-
- Message-id: <1395778948-47814-2-git-send-email-ddutile@redhat.com>
- Patchwork-id: 78602
- O-Subject: [PATCH 1/3] pmu: Adding support for Xgene PMUs
- Bugzilla: 1079110
-
- Backport of these two posted (but not upstream) patches.
- Combined into single patch due to gic-patch dependency.
-
- Signed-off-by: Donald Dutile <ddutile@redhat.com>
-
-commit 9f4c27693bb120a3134e3e7e8d452fb02d023e2b
-Author: Mark Salter <msalter@redhat.com>
-Date: Sun Jun 15 09:06:55 2014 -0400
-
- arm64: fix up APM Mustang devicetree
-
- These are changes needed when loading device tree blob built with
- kernel. i.e. with grub. These are not needed when using devicetree
- from Tianocore which will be fixed up at tianocore runtime.
-
- Signed-off-by: Mark Salter <msalter@redhat.com>
-
-commit 1f3a5b228be88be3f734d7a43db3b3f81e160443
-Author: Iyappan Subramanian <isubramanian@apm.com>
-Date: Mon Jul 14 15:18:05 2014 -0700
-
- drivers: net: Add APM X-Gene SoC ethernet driver support.
-
- This patch adds network driver for APM X-Gene SoC ethernet.
-
- Signed-off-by: Iyappan Subramanian <isubramanian@apm.com>
- Signed-off-by: Ravi Patel <rapatel@apm.com>
- Signed-off-by: Keyur Chudgar <kchudgar@apm.com>
-
-commit 54b3fe04c4a953eeb6907ffe9f57aae282f59457
-Author: Iyappan Subramanian <isubramanian@apm.com>
-Date: Mon Jul 14 15:18:04 2014 -0700
-
- dts: Add bindings for APM X-Gene SoC ethernet driver
-
- This patch adds bindings for APM X-Gene SoC ethernet driver.
-
- Signed-off-by: Iyappan Subramanian <isubramanian@apm.com>
- Signed-off-by: Ravi Patel <rapatel@apm.com>
- Signed-off-by: Keyur Chudgar <kchudgar@apm.com>
-
-commit 85125c4e1c1b1ef53d6cb77966efa89062540f43
-Author: Iyappan Subramanian <isubramanian@apm.com>
-Date: Mon Jul 14 15:18:03 2014 -0700
-
- Documentation: dts: Add bindings for APM X-Gene SoC ethernet driver
-
- This patch adds documentation for APM X-Gene SoC ethernet DTS binding.
-
- Signed-off-by: Iyappan Subramanian <isubramanian@apm.com>
- Signed-off-by: Ravi Patel <rapatel@apm.com>
- Signed-off-by: Keyur Chudgar <kchudgar@apm.com>
-
-commit fe8ec437eedc45384c23e1e12a09baa82d24fa16
-Author: Iyappan Subramanian <isubramanian@apm.com>
-Date: Mon Jul 14 15:18:02 2014 -0700
-
- MAINTAINERS: Add entry for APM X-Gene SoC ethernet driver
-
- This patch adds a MAINTAINERS entry for APM X-Gene SoC
- ethernet driver.
-
- Signed-off-by: Iyappan Subramanian <isubramanian@apm.com>
- Signed-off-by: Ravi Patel <rapatel@apm.com>
- Signed-off-by: Keyur Chudgar <kchudgar@apm.com>
-
-commit 237639e43c3d6587985a736f33264e129123d7a5
-Author: Mark Salter <msalter@redhat.com>
-Date: Fri Jul 25 15:14:32 2014 -0400
-
- arm/kvm: WIP fix for stage2 pgd memory leak
-
- Signed-off-by: Mark Salter <msalter@redhat.com>
-
-commit 0794e2900e5e4be4b7aa0b389e6b0bf8b55c5cd7
-Author: Mark Salter <msalter@redhat.com>
-Date: Thu Jul 17 13:34:50 2014 -0400
-
- ahci_xgene: add errata workaround for ATA_CMD_SMART
-
- commit 2a0bdff6b958d1b2:
-
- ahci_xgene: fix the dma state machine lockup for the IDENTIFY DEVICE PIO mode command.
-
- added a workaround for X-Gene AHCI controller errata. This was done
- for all ATA_CMD_ID_ATA commands. The errata also appears to affect
- ATA_CMD_SMART commands as well. This was discovered when running
- smartd or just smartctl -x. This patch adds a dma engine restart for
- ATA_CMD_SMART commands which clears up the issues seen with smartd.
-
- Signed-off-by: Mark Salter <msalter@redhat.com>
-
-commit 7adf85b63608b8bea1148f2faa84f475252a9e43
-Author: Mark Salter <msalter@redhat.com>
-Date: Fri Jul 25 15:32:05 2014 -0400
-
- rtc: ia64: allow other architectures to use EFI RTC
-
- Currently, the rtc-efi driver is restricted to ia64 only. Newer
- architectures with EFI support may want to also use that driver. This
- patch moves the platform device setup from ia64 into drivers/rtc and allow
- any architecture with CONFIG_EFI=y to use the rtc-efi driver.
-
- Signed-off-by: Mark Salter <msalter@redhat.com>
- Cc: Alessandro Zummo <a.zummo@towertech.it>
- Cc: Tony Luck <tony.luck@intel.com>
- Cc: Fenghua Yu <fenghua.yu@intel.com>
- Cc: Andrew Morton <akpm@linux-foundation.org>
-
-commit 3b2f96c7a6bfbd46e7dee1d7000081422a7983ce
-Author: Kyle McMartin <kmcmarti@redhat.com>
-Date: Tue May 13 22:25:26 2014 -0400
-
- arm64: don't set READ_IMPLIES_EXEC for EM_AARCH64 ELF objects
-
- Message-id: <20140513222526.GC26038@redacted.bos.redhat.com>
- Patchwork-id: 79789
- O-Subject: [ACADIA PATCH] arm64: don't set READ_IMPLIES_EXEC for EM_AARCH64 ELF objects
- Bugzilla: 1085528
-
- BZ: https://bugzilla.redhat.com/show_bug.cgi?id=1085528
- Upstream: submitted soon
-
- [Sadly this isn't (yet) sufficient... but it fixes at least one issue
- here... cat /proc/$$/personality shows READ_IMPLIES_EXEC before. I'll
- try to figure the rest out tomorrow.]
-
- Currently, we're accidentally ending up with executable stacks on
- AArch64 when the ABI says we shouldn't be, and relying on glibc to fix
- things up for us when we're loaded. However, SELinux will deny us
- mucking with the stack, and hit us with execmem AVCs.
-
- The reason this is happening is somewhat complex:
-
- fs/binfmt_elf.c:load_elf_binary()
- - initializes executable_stack = EXSTACK_DEFAULT implying the
- architecture should make up its mind.
- - does a pile of loading goo
- - runs through the program headers, looking for PT_GNU_STACK
- and setting (or unsetting) executable_stack if it finds it.
-
- This is our first problem, we won't generate these unless an
- executable stack is explicitly requested.
-
- - more ELF loading goo
- - sets whether we're a compat task or not (TIF_32BIT) based on compat.h
- - for compat reasons (pre-GNU_STACK) checks if the READ_IMPLIES_EXEC
- flag should be set for ancient toolchains
-
- Here's our second problem, we test if read_implies_exec based on
- stk != EXSTACK_DISABLE_X, which is true since stk == EXSTACK_DEFAULT.
-
- So we set current->personality |= READ_IMPLIES_EXEC like a broken
- legacy toolchain would want.
-
- - Now we call setup_arg_pages to set up the stack...
-
- fs/exec.c:setup_arg_pages()
- - lots of magic happens here
- - vm_flags gets initialized to VM_STACK_FLAGS
-
- Here's our third problem, VM_STACK_FLAGS on arm64 is
- VM_DEFAULT_DATA_FLAG which tests READ_IMPLIES_EXEC and sets VM_EXEC
- if it's true. So we end up with an executable stack mapping, since we
- don't have executable_stack set (it's still EXSTACK_DEFAULT at this
- point) to unset it anywhere.
-
- Bang. execstack AVC when the program starts running.
-
- The easiest way I can see to fix this is to test if we're a legacy task
- and fix it up there. But that's not as simple as it sounds, because
- the 32-bit ABI depends on what revision of the CPU we've enabled (not
- that it matters since we're ARMv8...) Regardless, in the compat case,
- set READ_IMPLIES_EXEC if we've found a GNU_STACK header which explicitly
- requested it as in arch/arm/kernel/elf.c:arm_elf_read_implies_exec().
-
- Signed-off-by: Kyle McMartin <kmcmarti@redhat.com>
- Signed-off-by: Donald Dutile <ddutile@redhat.com>
-
-commit 4b866971e92b925a44da8d876cb57864942a90b8
-Author: Mark Salter <msalter@redhat.com>
-Date: Thu Jul 24 15:56:15 2014 +0100
-
- arm64: fix soft lockup due to large tlb flush range
-
- Under certain loads, this soft lockup has been observed:
-
- BUG: soft lockup - CPU#2 stuck for 22s! [ip6tables:1016]
- Modules linked in: ip6t_rpfilter ip6t_REJECT cfg80211 rfkill xt_conntrack ebtable_nat ebtable_broute bridge stp llc ebtable_filter ebtables ip6table_nat nf_conntrack_ipv6 nf_defrag_ipv6 nf_nat_ipv6 ip6table_mangle ip6table_security ip6table_raw ip6table_filter ip6_tables iptable_nat nf_conntrack_ipv4 nf_defrag_ipv4 nf_nat_ipv4 nf_nat nf_conntrack iptable_mangle iptable_security iptable_raw vfat fat efivarfs xfs libcrc32c
-
- CPU: 2 PID: 1016 Comm: ip6tables Not tainted 3.13.0-0.rc7.30.sa2.aarch64 #1
- task: fffffe03e81d1400 ti: fffffe03f01f8000 task.ti: fffffe03f01f8000
- PC is at __cpu_flush_kern_tlb_range+0xc/0x40
- LR is at __purge_vmap_area_lazy+0x28c/0x3ac
- pc : [<fffffe000009c5cc>] lr : [<fffffe0000182710>] pstate: 80000145
- sp : fffffe03f01fbb70
- x29: fffffe03f01fbb70 x28: fffffe03f01f8000
- x27: fffffe0000b19000 x26: 00000000000000d0
- x25: 000000000000001c x24: fffffe03f01fbc50
- x23: fffffe03f01fbc58 x22: fffffe03f01fbc10
- x21: fffffe0000b2a3f8 x20: 0000000000000802
- x19: fffffe0000b2a3c8 x18: 000003fffdf52710
- x17: 000003ff9d8bb910 x16: fffffe000050fbfc
- x15: 0000000000005735 x14: 000003ff9d7e1a5c
- x13: 0000000000000000 x12: 000003ff9d7e1a5c
- x11: 0000000000000007 x10: fffffe0000c09af0
- x9 : fffffe0000ad1000 x8 : 000000000000005c
- x7 : fffffe03e8624000 x6 : 0000000000000000
- x5 : 0000000000000000 x4 : 0000000000000000
- x3 : fffffe0000c09cc8 x2 : 0000000000000000
- x1 : 000fffffdfffca80 x0 : 000fffffcd742150
-
- The __cpu_flush_kern_tlb_range() function looks like:
-
- ENTRY(__cpu_flush_kern_tlb_range)
- dsb sy
- lsr x0, x0, #12
- lsr x1, x1, #12
- 1: tlbi vaae1is, x0
- add x0, x0, #1
- cmp x0, x1
- b.lo 1b
- dsb sy
- isb
- ret
- ENDPROC(__cpu_flush_kern_tlb_range)
-
- The above soft lockup shows the PC at tlbi insn with:
-
- x0 = 0x000fffffcd742150
- x1 = 0x000fffffdfffca80
-
- So __cpu_flush_kern_tlb_range has 0x128ba930 tlbi flushes left
- after it has already been looping for 23 seconds!.
-
- Looking up one frame at __purge_vmap_area_lazy(), there is:
-
- ...
- list_for_each_entry_rcu(va, &vmap_area_list, list) {
- if (va->flags & VM_LAZY_FREE) {
- if (va->va_start < *start)
- *start = va->va_start;
- if (va->va_end > *end)
- *end = va->va_end;
- nr += (va->va_end - va->va_start) >> PAGE_SHIFT;
- list_add_tail(&va->purge_list, &valist);
- va->flags |= VM_LAZY_FREEING;
- va->flags &= ~VM_LAZY_FREE;
- }
- }
- ...
- if (nr || force_flush)
- flush_tlb_kernel_range(*start, *end);
-
- So if two areas are being freed, the range passed to
- flush_tlb_kernel_range() may be as large as the vmalloc
- space. For arm64, this is ~240GB for 4k pagesize and ~2TB
- for 64kpage size.
-
- This patch works around this problem by adding a loop limit.
- If the range is larger than the limit, use flush_tlb_all()
- rather than flushing based on individual pages. The limit
- chosen is arbitrary as the TLB size is implementation
- specific and not accessible in an architected way. The aim
- of the arbitrary limit is to avoid soft lockup.
-
- Signed-off-by: Mark Salter <msalter@redhat.com>
- [catalin.marinas@arm.com: commit log update]
- [catalin.marinas@arm.com: marginal optimisation]
- [catalin.marinas@arm.com: changed to MAX_TLB_RANGE and added comment]
- Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
-
diff --git a/Documentation/arm64/booting.txt b/Documentation/arm64/booting.txt
-index 37fc4f6..da1d4bf 100644
+index 85af34d..f3c05b5 100644
--- a/Documentation/arm64/booting.txt
+++ b/Documentation/arm64/booting.txt
-@@ -141,6 +141,14 @@ Before jumping into the kernel, the following conditions must be met:
+@@ -168,6 +168,14 @@ Before jumping into the kernel, the following conditions must be met:
the kernel image will be entered must be initialised by software at a
higher exception level to prevent execution in an UNKNOWN state.
@@ -1200,10 +239,10 @@ index 0000000..e19fdb8
+ status = "ok";
+ };
diff --git a/MAINTAINERS b/MAINTAINERS
-index 86efa7e..14a3ef1 100644
+index 0f066dd..5a10717 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
-@@ -699,6 +699,14 @@ S: Maintained
+@@ -701,6 +701,14 @@ S: Maintained
F: drivers/net/appletalk/
F: net/appletalk/
@@ -1218,7 +257,7 @@ index 86efa7e..14a3ef1 100644
APTINA CAMERA SENSOR PLL
M: Laurent Pinchart <Laurent.pinchart@ideasonboard.com>
L: linux-media@vger.kernel.org
-@@ -6851,6 +6859,13 @@ S: Maintained
+@@ -6861,6 +6869,13 @@ S: Maintained
F: Documentation/devicetree/bindings/pci/host-generic-pci.txt
F: drivers/pci/host/pci-host-generic.c
@@ -1342,18 +381,10 @@ index 76af9302..e4eaf30 100644
1: ldr r6, [r3], #4
str r6, [r2], #4
diff --git a/arch/arm64/Kconfig b/arch/arm64/Kconfig
-index 839f48c..23871dd 100644
+index b0f9c9d..be54ce2 100644
--- a/arch/arm64/Kconfig
+++ b/arch/arm64/Kconfig
-@@ -11,6 +11,7 @@ config ARM64
- select ARM_AMBA
- select ARM_ARCH_TIMER
- select ARM_GIC
-+ select ARM_GIC_V3
- select BUILDTIME_EXTABLE_SORT
- select CLONE_BACKWARDS
- select COMMON_CLK
-@@ -76,7 +77,7 @@ config MMU
+@@ -80,7 +80,7 @@ config MMU
def_bool y
config NO_IOPORT_MAP
@@ -1362,7 +393,7 @@ index 839f48c..23871dd 100644
config STACKTRACE_SUPPORT
def_bool y
-@@ -151,6 +152,23 @@ menu "Bus support"
+@@ -155,6 +155,23 @@ menu "Bus support"
config ARM_AMBA
bool
@@ -1915,60 +946,6 @@ index 0000000..3f7856e
+
+#endif /* __KERNEL__ */
+#endif /* __ASM_PCI_H */
-diff --git a/arch/arm64/include/asm/tlbflush.h b/arch/arm64/include/asm/tlbflush.h
-index b9349c4..ecbd081 100644
---- a/arch/arm64/include/asm/tlbflush.h
-+++ b/arch/arm64/include/asm/tlbflush.h
-@@ -98,8 +98,8 @@ static inline void flush_tlb_page(struct vm_area_struct *vma,
- dsb(ish);
- }
-
--static inline void flush_tlb_range(struct vm_area_struct *vma,
-- unsigned long start, unsigned long end)
-+static inline void __flush_tlb_range(struct vm_area_struct *vma,
-+ unsigned long start, unsigned long end)
- {
- unsigned long asid = (unsigned long)ASID(vma->vm_mm) << 48;
- unsigned long addr;
-@@ -112,7 +112,7 @@ static inline void flush_tlb_range(struct vm_area_struct *vma,
- dsb(ish);
- }
-
--static inline void flush_tlb_kernel_range(unsigned long start, unsigned long end)
-+static inline void __flush_tlb_kernel_range(unsigned long start, unsigned long end)
- {
- unsigned long addr;
- start >>= 12;
-@@ -125,6 +125,29 @@ static inline void flush_tlb_kernel_range(unsigned long start, unsigned long end
- }
-
- /*
-+ * This is meant to avoid soft lock-ups on large TLB flushing ranges and not
-+ * necessarily a performance improvement.
-+ */
-+#define MAX_TLB_RANGE (1024UL << PAGE_SHIFT)
-+
-+static inline void flush_tlb_range(struct vm_area_struct *vma,
-+ unsigned long start, unsigned long end)
-+{
-+ if ((end - start) <= MAX_TLB_RANGE)
-+ __flush_tlb_range(vma, start, end);
-+ else
-+ flush_tlb_mm(vma->vm_mm);
-+}
-+
-+static inline void flush_tlb_kernel_range(unsigned long start, unsigned long end)
-+{
-+ if ((end - start) <= MAX_TLB_RANGE)
-+ __flush_tlb_kernel_range(start, end);
-+ else
-+ flush_tlb_all();
-+}
-+
-+/*
- * On AArch64, the cache coherency is handled via the set_pte_at() function.
- */
- static inline void update_mmu_cache(struct vm_area_struct *vma,
diff --git a/arch/arm64/include/asm/virt.h b/arch/arm64/include/asm/virt.h
index 215ad46..7a5df52 100644
--- a/arch/arm64/include/asm/virt.h
@@ -1985,7 +962,7 @@ index 215ad46..7a5df52 100644
#endif /* ! __ASM__VIRT_H */
diff --git a/arch/arm64/kernel/Makefile b/arch/arm64/kernel/Makefile
-index cdaedad..36b117a 100644
+index df7ef87..1ed5a06 100644
--- a/arch/arm64/kernel/Makefile
+++ b/arch/arm64/kernel/Makefile
@@ -29,6 +29,7 @@ arm64-obj-$(CONFIG_ARM64_CPU_SUSPEND) += sleep.o suspend.o
@@ -2033,10 +1010,10 @@ index 646f888..e74654c 100644
DEFINE(KVM_VTTBR, offsetof(struct kvm, arch.vttbr));
DEFINE(KVM_VGIC_VCTRL, offsetof(struct kvm, arch.vgic.vctrl_base));
diff --git a/arch/arm64/kernel/efi-stub.c b/arch/arm64/kernel/efi-stub.c
-index e786e6c..320ef48 100644
+index 1317fef..d27dd98 100644
--- a/arch/arm64/kernel/efi-stub.c
+++ b/arch/arm64/kernel/efi-stub.c
-@@ -58,20 +58,16 @@ static efi_status_t handle_kernel_image(efi_system_table_t *sys_table,
+@@ -28,20 +28,16 @@ efi_status_t handle_kernel_image(efi_system_table_t *sys_table,
kernel_size = _edata - _text;
if (*image_addr != (dram_base + TEXT_OFFSET)) {
kernel_memsize = kernel_size + (_end - _edata);
@@ -2053,7 +1030,7 @@ index e786e6c..320ef48 100644
- if (*image_addr != (dram_base + TEXT_OFFSET)) {
- pr_efi_err(sys_table, "Failed to alloc kernel memory\n");
- efi_free(sys_table, kernel_memsize, *image_addr);
-- return EFI_ERROR;
+- return EFI_LOAD_ERROR;
- }
- *image_size = kernel_memsize;
+ memcpy((void *)*reserve_addr + TEXT_OFFSET, (void *)*image_addr,
@@ -2064,11 +1041,11 @@ index e786e6c..320ef48 100644
diff --git a/arch/arm64/kernel/efi.c b/arch/arm64/kernel/efi.c
-index 14db1f6..453b7f8 100644
+index e72f310..72ee260 100644
--- a/arch/arm64/kernel/efi.c
+++ b/arch/arm64/kernel/efi.c
-@@ -467,3 +467,14 @@ static int __init arm64_enter_virtual_mode(void)
- return 0;
+@@ -475,3 +475,14 @@ err_unmap:
+ return -1;
}
early_initcall(arm64_enter_virtual_mode);
+
@@ -2083,18 +1060,10 @@ index 14db1f6..453b7f8 100644
+ return pm_power_off == NULL;
+}
diff --git a/arch/arm64/kernel/head.S b/arch/arm64/kernel/head.S
-index a2c1195..8df59be 100644
+index 144f105..b6ca95a 100644
--- a/arch/arm64/kernel/head.S
+++ b/arch/arm64/kernel/head.S
-@@ -22,6 +22,7 @@
-
- #include <linux/linkage.h>
- #include <linux/init.h>
-+#include <linux/irqchip/arm-gic-v3.h>
-
- #include <asm/assembler.h>
- #include <asm/ptrace.h>
-@@ -156,7 +157,7 @@ optional_header:
+@@ -151,7 +151,7 @@ optional_header:
.short 0x20b // PE32+ format
.byte 0x02 // MajorLinkerVersion
.byte 0x14 // MinorLinkerVersion
@@ -2103,7 +1072,7 @@ index a2c1195..8df59be 100644
.long 0 // SizeOfInitializedData
.long 0 // SizeOfUninitializedData
.long efi_stub_entry - efi_head // AddressOfEntryPoint
-@@ -174,7 +175,7 @@ extra_header_fields:
+@@ -169,7 +169,7 @@ extra_header_fields:
.short 0 // MinorSubsystemVersion
.long 0 // Win32VersionValue
@@ -2112,7 +1081,7 @@ index a2c1195..8df59be 100644
// Everything before the kernel image is considered part of the header
.long stext - efi_head // SizeOfHeaders
-@@ -221,7 +222,7 @@ section_table:
+@@ -216,7 +216,7 @@ section_table:
.byte 0
.byte 0
.byte 0 // end of 0 padding of section name
@@ -2121,42 +1090,6 @@ index a2c1195..8df59be 100644
.long stext - efi_head // VirtualAddress
.long _edata - stext // SizeOfRawData
.long stext - efi_head // PointerToRawData
-@@ -295,6 +296,23 @@ CPU_LE( bic x0, x0, #(3 << 24) ) // Clear the EE and E0E bits for EL1
- msr cnthctl_el2, x0
- msr cntvoff_el2, xzr // Clear virtual offset
-
-+#ifdef CONFIG_ARM_GIC_V3
-+ /* GICv3 system register access */
-+ mrs x0, id_aa64pfr0_el1
-+ ubfx x0, x0, #24, #4
-+ cmp x0, #1
-+ b.ne 3f
-+
-+ mrs x0, ICC_SRE_EL2
-+ orr x0, x0, #ICC_SRE_EL2_SRE // Set ICC_SRE_EL2.SRE==1
-+ orr x0, x0, #ICC_SRE_EL2_ENABLE // Set ICC_SRE_EL2.Enable==1
-+ msr ICC_SRE_EL2, x0
-+ isb // Make sure SRE is now set
-+ msr ICH_HCR_EL2, xzr // Reset ICC_HCR_EL2 to defaults
-+
-+3:
-+#endif
-+
- /* Populate ID registers. */
- mrs x0, midr_el1
- mrs x1, mpidr_el1
-diff --git a/arch/arm64/kernel/hyp-stub.S b/arch/arm64/kernel/hyp-stub.S
-index 0959611..a272f33 100644
---- a/arch/arm64/kernel/hyp-stub.S
-+++ b/arch/arm64/kernel/hyp-stub.S
-@@ -19,6 +19,7 @@
-
- #include <linux/init.h>
- #include <linux/linkage.h>
-+#include <linux/irqchip/arm-gic-v3.h>
-
- #include <asm/assembler.h>
- #include <asm/ptrace.h>
diff --git a/arch/arm64/kernel/pci.c b/arch/arm64/kernel/pci.c
new file mode 100644
index 0000000..955d6d1
@@ -2202,7 +1135,7 @@ index 0000000..955d6d1
+ return res->start;
+}
diff --git a/arch/arm64/kernel/process.c b/arch/arm64/kernel/process.c
-index 43b7c34..ec5cbbe 100644
+index 1309d64..8ff5208 100644
--- a/arch/arm64/kernel/process.c
+++ b/arch/arm64/kernel/process.c
@@ -43,6 +43,7 @@
@@ -2213,7 +1146,7 @@ index 43b7c34..ec5cbbe 100644
#include <asm/compat.h>
#include <asm/cacheflush.h>
-@@ -176,6 +177,11 @@ void machine_restart(char *cmd)
+@@ -182,6 +183,11 @@ void machine_restart(char *cmd)
arm_pm_restart(reboot_mode, cmd);
/*
@@ -2613,7 +1546,7 @@ index 0000000..ae21177
+ .popsection
diff --git a/arch/arm64/kvm/vgic-v3-switch.S b/arch/arm64/kvm/vgic-v3-switch.S
new file mode 100644
-index 0000000..21e68f6
+index 0000000..d160469
--- /dev/null
+++ b/arch/arm64/kvm/vgic-v3-switch.S
@@ -0,0 +1,267 @@
@@ -2667,11 +1600,11 @@ index 0000000..21e68f6
+ dsb st
+
+ // Save all interesting registers
-+ mrs x4, ICH_HCR_EL2
-+ mrs x5, ICH_VMCR_EL2
-+ mrs x6, ICH_MISR_EL2
-+ mrs x7, ICH_EISR_EL2
-+ mrs x8, ICH_ELSR_EL2
++ mrs_s x4, ICH_HCR_EL2
++ mrs_s x5, ICH_VMCR_EL2
++ mrs_s x6, ICH_MISR_EL2
++ mrs_s x7, ICH_EISR_EL2
++ mrs_s x8, ICH_ELSR_EL2
+
+ str w4, [x3, #VGIC_V3_CPU_HCR]
+ str w5, [x3, #VGIC_V3_CPU_VMCR]
@@ -2679,9 +1612,9 @@ index 0000000..21e68f6
+ str w7, [x3, #VGIC_V3_CPU_EISR]
+ str w8, [x3, #VGIC_V3_CPU_ELRSR]
+
-+ msr ICH_HCR_EL2, xzr
++ msr_s ICH_HCR_EL2, xzr
+
-+ mrs x21, ICH_VTR_EL2
++ mrs_s x21, ICH_VTR_EL2
+ mvn w22, w21
+ ubfiz w23, w22, 2, 4 // w23 = (15 - ListRegs) * 4
+
@@ -2690,22 +1623,22 @@ index 0000000..21e68f6
+ br x24
+
+1:
-+ mrs x20, ICH_LR15_EL2
-+ mrs x19, ICH_LR14_EL2
-+ mrs x18, ICH_LR13_EL2
-+ mrs x17, ICH_LR12_EL2
-+ mrs x16, ICH_LR11_EL2
-+ mrs x15, ICH_LR10_EL2
-+ mrs x14, ICH_LR9_EL2
-+ mrs x13, ICH_LR8_EL2
-+ mrs x12, ICH_LR7_EL2
-+ mrs x11, ICH_LR6_EL2
-+ mrs x10, ICH_LR5_EL2
-+ mrs x9, ICH_LR4_EL2
-+ mrs x8, ICH_LR3_EL2
-+ mrs x7, ICH_LR2_EL2
-+ mrs x6, ICH_LR1_EL2
-+ mrs x5, ICH_LR0_EL2
++ mrs_s x20, ICH_LR15_EL2
++ mrs_s x19, ICH_LR14_EL2
++ mrs_s x18, ICH_LR13_EL2
++ mrs_s x17, ICH_LR12_EL2
++ mrs_s x16, ICH_LR11_EL2
++ mrs_s x15, ICH_LR10_EL2
++ mrs_s x14, ICH_LR9_EL2
++ mrs_s x13, ICH_LR8_EL2
++ mrs_s x12, ICH_LR7_EL2
++ mrs_s x11, ICH_LR6_EL2
++ mrs_s x10, ICH_LR5_EL2
++ mrs_s x9, ICH_LR4_EL2
++ mrs_s x8, ICH_LR3_EL2
++ mrs_s x7, ICH_LR2_EL2
++ mrs_s x6, ICH_LR1_EL2
++ mrs_s x5, ICH_LR0_EL2
+
+ adr x24, 1f
+ add x24, x24, x23
@@ -2732,34 +1665,34 @@ index 0000000..21e68f6
+ tbnz w21, #29, 6f // 6 bits
+ tbz w21, #30, 5f // 5 bits
+ // 7 bits
-+ mrs x20, ICH_AP0R3_EL2
++ mrs_s x20, ICH_AP0R3_EL2
+ str w20, [x3, #(VGIC_V3_CPU_AP0R + 3*4)]
-+ mrs x19, ICH_AP0R2_EL2
++ mrs_s x19, ICH_AP0R2_EL2
+ str w19, [x3, #(VGIC_V3_CPU_AP0R + 2*4)]
-+6: mrs x18, ICH_AP0R1_EL2
++6: mrs_s x18, ICH_AP0R1_EL2
+ str w18, [x3, #(VGIC_V3_CPU_AP0R + 1*4)]
-+5: mrs x17, ICH_AP0R0_EL2
++5: mrs_s x17, ICH_AP0R0_EL2
+ str w17, [x3, #VGIC_V3_CPU_AP0R]
+
+ tbnz w21, #29, 6f // 6 bits
+ tbz w21, #30, 5f // 5 bits
+ // 7 bits
-+ mrs x20, ICH_AP1R3_EL2
++ mrs_s x20, ICH_AP1R3_EL2
+ str w20, [x3, #(VGIC_V3_CPU_AP1R + 3*4)]
-+ mrs x19, ICH_AP1R2_EL2
++ mrs_s x19, ICH_AP1R2_EL2
+ str w19, [x3, #(VGIC_V3_CPU_AP1R + 2*4)]
-+6: mrs x18, ICH_AP1R1_EL2
++6: mrs_s x18, ICH_AP1R1_EL2
+ str w18, [x3, #(VGIC_V3_CPU_AP1R + 1*4)]
-+5: mrs x17, ICH_AP1R0_EL2
++5: mrs_s x17, ICH_AP1R0_EL2
+ str w17, [x3, #VGIC_V3_CPU_AP1R]
+
+ // Restore SRE_EL1 access and re-enable SRE at EL1.
-+ mrs x5, ICC_SRE_EL2
++ mrs_s x5, ICC_SRE_EL2
+ orr x5, x5, #ICC_SRE_EL2_ENABLE
-+ msr ICC_SRE_EL2, x5
++ msr_s ICC_SRE_EL2, x5
+ isb
+ mov x5, #1
-+ msr ICC_SRE_EL1, x5
++ msr_s ICC_SRE_EL1, x5
+.endm
+
+/*
@@ -2769,7 +1702,7 @@ index 0000000..21e68f6
+.macro restore_vgic_v3_state
+ // Disable SRE_EL1 access. Necessary, otherwise
+ // ICH_VMCR_EL2.VFIQEn becomes one, and FIQ happens...
-+ msr ICC_SRE_EL1, xzr
++ msr_s ICC_SRE_EL1, xzr
+ isb
+
+ // Compute the address of struct vgic_cpu
@@ -2779,34 +1712,34 @@ index 0000000..21e68f6
+ ldr w4, [x3, #VGIC_V3_CPU_HCR]
+ ldr w5, [x3, #VGIC_V3_CPU_VMCR]
+
-+ msr ICH_HCR_EL2, x4
-+ msr ICH_VMCR_EL2, x5
++ msr_s ICH_HCR_EL2, x4
++ msr_s ICH_VMCR_EL2, x5
+
-+ mrs x21, ICH_VTR_EL2
++ mrs_s x21, ICH_VTR_EL2
+
+ tbnz w21, #29, 6f // 6 bits
+ tbz w21, #30, 5f // 5 bits
+ // 7 bits
+ ldr w20, [x3, #(VGIC_V3_CPU_AP1R + 3*4)]
-+ msr ICH_AP1R3_EL2, x20
++ msr_s ICH_AP1R3_EL2, x20
+ ldr w19, [x3, #(VGIC_V3_CPU_AP1R + 2*4)]
-+ msr ICH_AP1R2_EL2, x19
++ msr_s ICH_AP1R2_EL2, x19
+6: ldr w18, [x3, #(VGIC_V3_CPU_AP1R + 1*4)]
-+ msr ICH_AP1R1_EL2, x18
++ msr_s ICH_AP1R1_EL2, x18
+5: ldr w17, [x3, #VGIC_V3_CPU_AP1R]
-+ msr ICH_AP1R0_EL2, x17
++ msr_s ICH_AP1R0_EL2, x17
+
+ tbnz w21, #29, 6f // 6 bits
+ tbz w21, #30, 5f // 5 bits
+ // 7 bits
+ ldr w20, [x3, #(VGIC_V3_CPU_AP0R + 3*4)]
-+ msr ICH_AP0R3_EL2, x20
++ msr_s ICH_AP0R3_EL2, x20
+ ldr w19, [x3, #(VGIC_V3_CPU_AP0R + 2*4)]
-+ msr ICH_AP0R2_EL2, x19
++ msr_s ICH_AP0R2_EL2, x19
+6: ldr w18, [x3, #(VGIC_V3_CPU_AP0R + 1*4)]
-+ msr ICH_AP0R1_EL2, x18
++ msr_s ICH_AP0R1_EL2, x18
+5: ldr w17, [x3, #VGIC_V3_CPU_AP0R]
-+ msr ICH_AP0R0_EL2, x17
++ msr_s ICH_AP0R0_EL2, x17
+
+ and w22, w21, #0xf
+ mvn w22, w21
@@ -2839,22 +1772,22 @@ index 0000000..21e68f6
+ br x24
+
+1:
-+ msr ICH_LR15_EL2, x20
-+ msr ICH_LR14_EL2, x19
-+ msr ICH_LR13_EL2, x18
-+ msr ICH_LR12_EL2, x17
-+ msr ICH_LR11_EL2, x16
-+ msr ICH_LR10_EL2, x15
-+ msr ICH_LR9_EL2, x14
-+ msr ICH_LR8_EL2, x13
-+ msr ICH_LR7_EL2, x12
-+ msr ICH_LR6_EL2, x11
-+ msr ICH_LR5_EL2, x10
-+ msr ICH_LR4_EL2, x9
-+ msr ICH_LR3_EL2, x8
-+ msr ICH_LR2_EL2, x7
-+ msr ICH_LR1_EL2, x6
-+ msr ICH_LR0_EL2, x5
++ msr_s ICH_LR15_EL2, x20
++ msr_s ICH_LR14_EL2, x19
++ msr_s ICH_LR13_EL2, x18
++ msr_s ICH_LR12_EL2, x17
++ msr_s ICH_LR11_EL2, x16
++ msr_s ICH_LR10_EL2, x15
++ msr_s ICH_LR9_EL2, x14
++ msr_s ICH_LR8_EL2, x13
++ msr_s ICH_LR7_EL2, x12
++ msr_s ICH_LR6_EL2, x11
++ msr_s ICH_LR5_EL2, x10
++ msr_s ICH_LR4_EL2, x9
++ msr_s ICH_LR3_EL2, x8
++ msr_s ICH_LR2_EL2, x7
++ msr_s ICH_LR1_EL2, x6
++ msr_s ICH_LR0_EL2, x5
+
+ // Ensure that the above will have reached the
+ // (re)distributors. This ensure the guest will read
@@ -2863,9 +1796,9 @@ index 0000000..21e68f6
+ dsb sy
+
+ // Prevent the guest from touching the GIC system registers
-+ mrs x5, ICC_SRE_EL2
++ mrs_s x5, ICC_SRE_EL2
+ and x5, x5, #~ICC_SRE_EL2_ENABLE
-+ msr ICC_SRE_EL2, x5
++ msr_s ICC_SRE_EL2, x5
+.endm
+
+ENTRY(__save_vgic_v3_state)
@@ -2879,24 +1812,11 @@ index 0000000..21e68f6
+ENDPROC(__restore_vgic_v3_state)
+
+ENTRY(__vgic_v3_get_ich_vtr_el2)
-+ mrs x0, ICH_VTR_EL2
++ mrs_s x0, ICH_VTR_EL2
+ ret
+ENDPROC(__vgic_v3_get_ich_vtr_el2)
+
+ .popsection
-diff --git a/arch/ia64/kernel/process.c b/arch/ia64/kernel/process.c
-index 55d4ba4..deed6fa 100644
---- a/arch/ia64/kernel/process.c
-+++ b/arch/ia64/kernel/process.c
-@@ -662,7 +662,7 @@ void
- machine_restart (char *restart_cmd)
- {
- (void) notify_die(DIE_MACHINE_RESTART, restart_cmd, NULL, 0, 0, 0);
-- (*efi.reset_system)(EFI_RESET_WARM, 0, 0, NULL);
-+ efi_reboot(REBOOT_WARM, NULL);
- }
-
- void
diff --git a/arch/ia64/kernel/time.c b/arch/ia64/kernel/time.c
index 71c52bc..a149c67 100644
--- a/arch/ia64/kernel/time.c
@@ -2923,704 +1843,11 @@ index 71c52bc..a149c67 100644
void read_persistent_clock(struct timespec *ts)
{
efi_gettimeofday(ts);
-diff --git a/arch/x86/include/asm/efi.h b/arch/x86/include/asm/efi.h
-index 1eb5f64..5d71d0e 100644
---- a/arch/x86/include/asm/efi.h
-+++ b/arch/x86/include/asm/efi.h
-@@ -104,6 +104,8 @@ extern void __init runtime_code_page_mkexec(void);
- extern void __init efi_runtime_mkexec(void);
- extern void __init efi_dump_pagetable(void);
- extern void __init efi_apply_memmap_quirks(void);
-+extern int __init efi_reuse_config(u64 tables, int nr_tables);
-+extern void efi_delete_dummy_variable(void);
-
- struct efi_setup_data {
- u64 fw_vendor;
-@@ -156,6 +158,8 @@ static inline efi_status_t efi_thunk_set_virtual_address_map(
- return EFI_SUCCESS;
- }
- #endif /* CONFIG_EFI_MIXED */
-+
-+extern bool efi_reboot_required(void);
- #else
- /*
- * IF EFI is not configured, have the EFI calls return -ENOSYS.
-@@ -168,6 +172,10 @@ static inline efi_status_t efi_thunk_set_virtual_address_map(
- #define efi_call5(_f, _a1, _a2, _a3, _a4, _a5) (-ENOSYS)
- #define efi_call6(_f, _a1, _a2, _a3, _a4, _a5, _a6) (-ENOSYS)
- static inline void parse_efi_setup(u64 phys_addr, u32 data_len) {}
-+static inline bool efi_reboot_required(void)
-+{
-+ return false;
-+}
- #endif /* CONFIG_EFI */
-
- #endif /* _ASM_X86_EFI_H */
-diff --git a/arch/x86/kernel/reboot.c b/arch/x86/kernel/reboot.c
-index 52b1157..17962e6 100644
---- a/arch/x86/kernel/reboot.c
-+++ b/arch/x86/kernel/reboot.c
-@@ -28,6 +28,7 @@
- #include <linux/mc146818rtc.h>
- #include <asm/realmode.h>
- #include <asm/x86_init.h>
-+#include <asm/efi.h>
-
- /*
- * Power off function, if any
-@@ -401,12 +402,25 @@ static struct dmi_system_id __initdata reboot_dmi_table[] = {
-
- static int __init reboot_init(void)
- {
-+ int rv;
-+
- /*
- * Only do the DMI check if reboot_type hasn't been overridden
- * on the command line
- */
-- if (reboot_default)
-- dmi_check_system(reboot_dmi_table);
-+ if (!reboot_default)
-+ return 0;
-+
-+ /*
-+ * The DMI quirks table takes precedence. If no quirks entry
-+ * matches and the ACPI Hardware Reduced bit is set, force EFI
-+ * reboot.
-+ */
-+ rv = dmi_check_system(reboot_dmi_table);
-+
-+ if (!rv && efi_reboot_required())
-+ reboot_type = BOOT_EFI;
-+
- return 0;
- }
- core_initcall(reboot_init);
-@@ -528,11 +542,7 @@ static void native_machine_emergency_restart(void)
- break;
-
- case BOOT_EFI:
-- if (efi_enabled(EFI_RUNTIME_SERVICES))
-- efi.reset_system(reboot_mode == REBOOT_WARM ?
-- EFI_RESET_WARM :
-- EFI_RESET_COLD,
-- EFI_SUCCESS, 0, NULL);
-+ efi_reboot(reboot_mode, NULL);
- reboot_type = BOOT_BIOS;
- break;
-
-diff --git a/arch/x86/platform/efi/Makefile b/arch/x86/platform/efi/Makefile
-index d51045a..2846aaa 100644
---- a/arch/x86/platform/efi/Makefile
-+++ b/arch/x86/platform/efi/Makefile
-@@ -1,4 +1,4 @@
--obj-$(CONFIG_EFI) += efi.o efi_$(BITS).o efi_stub_$(BITS).o
-+obj-$(CONFIG_EFI) += quirks.o efi.o efi_$(BITS).o efi_stub_$(BITS).o
- obj-$(CONFIG_ACPI_BGRT) += efi-bgrt.o
- obj-$(CONFIG_EARLY_PRINTK_EFI) += early_printk.o
- obj-$(CONFIG_EFI_MIXED) += efi_thunk_$(BITS).o
-diff --git a/arch/x86/platform/efi/efi.c b/arch/x86/platform/efi/efi.c
-index 87fc96b..f852443 100644
---- a/arch/x86/platform/efi/efi.c
-+++ b/arch/x86/platform/efi/efi.c
-@@ -56,13 +56,6 @@
-
- #define EFI_DEBUG
-
--#define EFI_MIN_RESERVE 5120
--
--#define EFI_DUMMY_GUID \
-- EFI_GUID(0x4424ac57, 0xbe4b, 0x47dd, 0x9e, 0x97, 0xed, 0x50, 0xf0, 0x9f, 0x92, 0xa9)
--
--static efi_char16_t efi_dummy_name[6] = { 'D', 'U', 'M', 'M', 'Y', 0 };
--
- struct efi_memory_map memmap;
-
- static struct efi efi_phys __initdata;
-@@ -95,15 +88,6 @@ static int __init setup_add_efi_memmap(char *arg)
- }
- early_param("add_efi_memmap", setup_add_efi_memmap);
-
--static bool efi_no_storage_paranoia;
--
--static int __init setup_storage_paranoia(char *arg)
--{
-- efi_no_storage_paranoia = true;
-- return 0;
--}
--early_param("efi_no_storage_paranoia", setup_storage_paranoia);
--
- static efi_status_t virt_efi_get_time(efi_time_t *tm, efi_time_cap_t *tc)
- {
- unsigned long flags;
-@@ -392,37 +376,6 @@ static void __init print_efi_memmap(void)
- #endif /* EFI_DEBUG */
- }
-
--void __init efi_reserve_boot_services(void)
--{
-- void *p;
--
-- for (p = memmap.map; p < memmap.map_end; p += memmap.desc_size) {
-- efi_memory_desc_t *md = p;
-- u64 start = md->phys_addr;
-- u64 size = md->num_pages << EFI_PAGE_SHIFT;
--
-- if (md->type != EFI_BOOT_SERVICES_CODE &&
-- md->type != EFI_BOOT_SERVICES_DATA)
-- continue;
-- /* Only reserve where possible:
-- * - Not within any already allocated areas
-- * - Not over any memory area (really needed, if above?)
-- * - Not within any part of the kernel
-- * - Not the bios reserved area
-- */
-- if ((start + size > __pa_symbol(_text)
-- && start <= __pa_symbol(_end)) ||
-- !e820_all_mapped(start, start+size, E820_RAM) ||
-- memblock_is_region_reserved(start, size)) {
-- /* Could not reserve, skip it */
-- md->num_pages = 0;
-- memblock_dbg("Could not reserve boot range [0x%010llx-0x%010llx]\n",
-- start, start+size-1);
-- } else
-- memblock_reserve(start, size);
-- }
--}
--
- void __init efi_unmap_memmap(void)
- {
- clear_bit(EFI_MEMMAP, &efi.flags);
-@@ -432,29 +385,6 @@ void __init efi_unmap_memmap(void)
- }
- }
-
--void __init efi_free_boot_services(void)
--{
-- void *p;
--
-- for (p = memmap.map; p < memmap.map_end; p += memmap.desc_size) {
-- efi_memory_desc_t *md = p;
-- unsigned long long start = md->phys_addr;
-- unsigned long long size = md->num_pages << EFI_PAGE_SHIFT;
--
-- if (md->type != EFI_BOOT_SERVICES_CODE &&
-- md->type != EFI_BOOT_SERVICES_DATA)
-- continue;
--
-- /* Could not reserve boot area */
-- if (!size)
-- continue;
--
-- free_bootmem_late(start, size);
-- }
--
-- efi_unmap_memmap();
--}
--
- static int __init efi_systab_init(void *phys)
- {
- if (efi_enabled(EFI_64BIT)) {
-@@ -649,62 +579,6 @@ static int __init efi_memmap_init(void)
- return 0;
- }
-
--/*
-- * A number of config table entries get remapped to virtual addresses
-- * after entering EFI virtual mode. However, the kexec kernel requires
-- * their physical addresses therefore we pass them via setup_data and
-- * correct those entries to their respective physical addresses here.
-- *
-- * Currently only handles smbios which is necessary for some firmware
-- * implementation.
-- */
--static int __init efi_reuse_config(u64 tables, int nr_tables)
--{
-- int i, sz, ret = 0;
-- void *p, *tablep;
-- struct efi_setup_data *data;
--
-- if (!efi_setup)
-- return 0;
--
-- if (!efi_enabled(EFI_64BIT))
-- return 0;
--
-- data = early_memremap(efi_setup, sizeof(*data));
-- if (!data) {
-- ret = -ENOMEM;
-- goto out;
-- }
--
-- if (!data->smbios)
-- goto out_memremap;
--
-- sz = sizeof(efi_config_table_64_t);
--
-- p = tablep = early_memremap(tables, nr_tables * sz);
-- if (!p) {
-- pr_err("Could not map Configuration table!\n");
-- ret = -ENOMEM;
-- goto out_memremap;
-- }
--
-- for (i = 0; i < efi.systab->nr_tables; i++) {
-- efi_guid_t guid;
--
-- guid = ((efi_config_table_64_t *)p)->guid;
--
-- if (!efi_guidcmp(guid, SMBIOS_TABLE_GUID))
-- ((efi_config_table_64_t *)p)->table = data->smbios;
-- p += sz;
-- }
-- early_iounmap(tablep, nr_tables * sz);
--
--out_memremap:
-- early_iounmap(data, sizeof(*data));
--out:
-- return ret;
--}
--
- void __init efi_init(void)
- {
- efi_char16_t *c16;
-@@ -1057,11 +931,7 @@ static void __init kexec_enter_virtual_mode(void)
- runtime_code_page_mkexec();
-
- /* clean DUMMY object */
-- efi.set_variable(efi_dummy_name, &EFI_DUMMY_GUID,
-- EFI_VARIABLE_NON_VOLATILE |
-- EFI_VARIABLE_BOOTSERVICE_ACCESS |
-- EFI_VARIABLE_RUNTIME_ACCESS,
-- 0, NULL);
-+ efi_delete_dummy_variable();
- #endif
- }
-
-@@ -1179,11 +1049,7 @@ static void __init __efi_enter_virtual_mode(void)
- free_pages((unsigned long)new_memmap, pg_shift);
-
- /* clean DUMMY object */
-- efi.set_variable(efi_dummy_name, &EFI_DUMMY_GUID,
-- EFI_VARIABLE_NON_VOLATILE |
-- EFI_VARIABLE_BOOTSERVICE_ACCESS |
-- EFI_VARIABLE_RUNTIME_ACCESS,
-- 0, NULL);
-+ efi_delete_dummy_variable();
- }
-
- void __init efi_enter_virtual_mode(void)
-@@ -1230,86 +1096,6 @@ u64 efi_mem_attributes(unsigned long phys_addr)
- return 0;
- }
-
--/*
-- * Some firmware implementations refuse to boot if there's insufficient space
-- * in the variable store. Ensure that we never use more than a safe limit.
-- *
-- * Return EFI_SUCCESS if it is safe to write 'size' bytes to the variable
-- * store.
-- */
--efi_status_t efi_query_variable_store(u32 attributes, unsigned long size)
--{
-- efi_status_t status;
-- u64 storage_size, remaining_size, max_size;
--
-- if (!(attributes & EFI_VARIABLE_NON_VOLATILE))
-- return 0;
--
-- status = efi.query_variable_info(attributes, &storage_size,
-- &remaining_size, &max_size);
-- if (status != EFI_SUCCESS)
-- return status;
--
-- /*
-- * We account for that by refusing the write if permitting it would
-- * reduce the available space to under 5KB. This figure was provided by
-- * Samsung, so should be safe.
-- */
-- if ((remaining_size - size < EFI_MIN_RESERVE) &&
-- !efi_no_storage_paranoia) {
--
-- /*
-- * Triggering garbage collection may require that the firmware
-- * generate a real EFI_OUT_OF_RESOURCES error. We can force
-- * that by attempting to use more space than is available.
-- */
-- unsigned long dummy_size = remaining_size + 1024;
-- void *dummy = kzalloc(dummy_size, GFP_ATOMIC);
--
-- if (!dummy)
-- return EFI_OUT_OF_RESOURCES;
--
-- status = efi.set_variable(efi_dummy_name, &EFI_DUMMY_GUID,
-- EFI_VARIABLE_NON_VOLATILE |
-- EFI_VARIABLE_BOOTSERVICE_ACCESS |
-- EFI_VARIABLE_RUNTIME_ACCESS,
-- dummy_size, dummy);
--
-- if (status == EFI_SUCCESS) {
-- /*
-- * This should have failed, so if it didn't make sure
-- * that we delete it...
-- */
-- efi.set_variable(efi_dummy_name, &EFI_DUMMY_GUID,
-- EFI_VARIABLE_NON_VOLATILE |
-- EFI_VARIABLE_BOOTSERVICE_ACCESS |
-- EFI_VARIABLE_RUNTIME_ACCESS,
-- 0, dummy);
-- }
--
-- kfree(dummy);
--
-- /*
-- * The runtime code may now have triggered a garbage collection
-- * run, so check the variable info again
-- */
-- status = efi.query_variable_info(attributes, &storage_size,
-- &remaining_size, &max_size);
--
-- if (status != EFI_SUCCESS)
-- return status;
--
-- /*
-- * There still isn't enough room, so return an error
-- */
-- if (remaining_size - size < EFI_MIN_RESERVE)
-- return EFI_OUT_OF_RESOURCES;
-- }
--
-- return EFI_SUCCESS;
--}
--EXPORT_SYMBOL_GPL(efi_query_variable_store);
--
- static int __init parse_efi_cmdline(char *str)
- {
- if (*str == '=')
-@@ -1321,22 +1107,3 @@ static int __init parse_efi_cmdline(char *str)
- return 0;
- }
- early_param("efi", parse_efi_cmdline);
--
--void __init efi_apply_memmap_quirks(void)
--{
-- /*
-- * Once setup is done earlier, unmap the EFI memory map on mismatched
-- * firmware/kernel architectures since there is no support for runtime
-- * services.
-- */
-- if (!efi_runtime_supported()) {
-- pr_info("efi: Setup done, disabling due to 32/64-bit mismatch\n");
-- efi_unmap_memmap();
-- }
--
-- /*
-- * UV doesn't support the new EFI pagetable mapping yet.
-- */
-- if (is_uv_system())
-- set_bit(EFI_OLD_MEMMAP, &efi.flags);
--}
-diff --git a/arch/x86/platform/efi/quirks.c b/arch/x86/platform/efi/quirks.c
-new file mode 100644
-index 0000000..1b9c4c3
---- /dev/null
-+++ b/arch/x86/platform/efi/quirks.c
-@@ -0,0 +1,290 @@
-+#include <linux/init.h>
-+#include <linux/kernel.h>
-+#include <linux/string.h>
-+#include <linux/time.h>
-+#include <linux/types.h>
-+#include <linux/efi.h>
-+#include <linux/slab.h>
-+#include <linux/memblock.h>
-+#include <linux/bootmem.h>
-+#include <linux/acpi.h>
-+#include <asm/efi.h>
-+#include <asm/uv/uv.h>
-+
-+#define EFI_MIN_RESERVE 5120
-+
-+#define EFI_DUMMY_GUID \
-+ EFI_GUID(0x4424ac57, 0xbe4b, 0x47dd, 0x9e, 0x97, 0xed, 0x50, 0xf0, 0x9f, 0x92, 0xa9)
-+
-+static efi_char16_t efi_dummy_name[6] = { 'D', 'U', 'M', 'M', 'Y', 0 };
-+
-+static bool efi_no_storage_paranoia;
-+
-+/*
-+ * Some firmware implementations refuse to boot if there's insufficient
-+ * space in the variable store. The implementation of garbage collection
-+ * in some FW versions causes stale (deleted) variables to take up space
-+ * longer than intended and space is only freed once the store becomes
-+ * almost completely full.
-+ *
-+ * Enabling this option disables the space checks in
-+ * efi_query_variable_store() and forces garbage collection.
-+ *
-+ * Only enable this option if deleting EFI variables does not free up
-+ * space in your variable store, e.g. if despite deleting variables
-+ * you're unable to create new ones.
-+ */
-+static int __init setup_storage_paranoia(char *arg)
-+{
-+ efi_no_storage_paranoia = true;
-+ return 0;
-+}
-+early_param("efi_no_storage_paranoia", setup_storage_paranoia);
-+
-+/*
-+ * Deleting the dummy variable which kicks off garbage collection
-+*/
-+void efi_delete_dummy_variable(void)
-+{
-+ efi.set_variable(efi_dummy_name, &EFI_DUMMY_GUID,
-+ EFI_VARIABLE_NON_VOLATILE |
-+ EFI_VARIABLE_BOOTSERVICE_ACCESS |
-+ EFI_VARIABLE_RUNTIME_ACCESS,
-+ 0, NULL);
-+}
-+
-+/*
-+ * Some firmware implementations refuse to boot if there's insufficient space
-+ * in the variable store. Ensure that we never use more than a safe limit.
-+ *
-+ * Return EFI_SUCCESS if it is safe to write 'size' bytes to the variable
-+ * store.
-+ */
-+efi_status_t efi_query_variable_store(u32 attributes, unsigned long size)
-+{
-+ efi_status_t status;
-+ u64 storage_size, remaining_size, max_size;
-+
-+ if (!(attributes & EFI_VARIABLE_NON_VOLATILE))
-+ return 0;
-+
-+ status = efi.query_variable_info(attributes, &storage_size,
-+ &remaining_size, &max_size);
-+ if (status != EFI_SUCCESS)
-+ return status;
-+
-+ /*
-+ * We account for that by refusing the write if permitting it would
-+ * reduce the available space to under 5KB. This figure was provided by
-+ * Samsung, so should be safe.
-+ */
-+ if ((remaining_size - size < EFI_MIN_RESERVE) &&
-+ !efi_no_storage_paranoia) {
-+
-+ /*
-+ * Triggering garbage collection may require that the firmware
-+ * generate a real EFI_OUT_OF_RESOURCES error. We can force
-+ * that by attempting to use more space than is available.
-+ */
-+ unsigned long dummy_size = remaining_size + 1024;
-+ void *dummy = kzalloc(dummy_size, GFP_ATOMIC);
-+
-+ if (!dummy)
-+ return EFI_OUT_OF_RESOURCES;
-+
-+ status = efi.set_variable(efi_dummy_name, &EFI_DUMMY_GUID,
-+ EFI_VARIABLE_NON_VOLATILE |
-+ EFI_VARIABLE_BOOTSERVICE_ACCESS |
-+ EFI_VARIABLE_RUNTIME_ACCESS,
-+ dummy_size, dummy);
-+
-+ if (status == EFI_SUCCESS) {
-+ /*
-+ * This should have failed, so if it didn't make sure
-+ * that we delete it...
-+ */
-+ efi_delete_dummy_variable();
-+ }
-+
-+ kfree(dummy);
-+
-+ /*
-+ * The runtime code may now have triggered a garbage collection
-+ * run, so check the variable info again
-+ */
-+ status = efi.query_variable_info(attributes, &storage_size,
-+ &remaining_size, &max_size);
-+
-+ if (status != EFI_SUCCESS)
-+ return status;
-+
-+ /*
-+ * There still isn't enough room, so return an error
-+ */
-+ if (remaining_size - size < EFI_MIN_RESERVE)
-+ return EFI_OUT_OF_RESOURCES;
-+ }
-+
-+ return EFI_SUCCESS;
-+}
-+EXPORT_SYMBOL_GPL(efi_query_variable_store);
-+
-+/*
-+ * The UEFI specification makes it clear that the operating system is free to do
-+ * whatever it wants with boot services code after ExitBootServices() has been
-+ * called. Ignoring this recommendation a significant bunch of EFI implementations
-+ * continue calling into boot services code (SetVirtualAddressMap). In order to
-+ * work around such buggy implementations we reserve boot services region during
-+ * EFI init and make sure it stays executable. Then, after SetVirtualAddressMap(), it
-+* is discarded.
-+*/
-+void __init efi_reserve_boot_services(void)
-+{
-+ void *p;
-+
-+ for (p = memmap.map; p < memmap.map_end; p += memmap.desc_size) {
-+ efi_memory_desc_t *md = p;
-+ u64 start = md->phys_addr;
-+ u64 size = md->num_pages << EFI_PAGE_SHIFT;
-+
-+ if (md->type != EFI_BOOT_SERVICES_CODE &&
-+ md->type != EFI_BOOT_SERVICES_DATA)
-+ continue;
-+ /* Only reserve where possible:
-+ * - Not within any already allocated areas
-+ * - Not over any memory area (really needed, if above?)
-+ * - Not within any part of the kernel
-+ * - Not the bios reserved area
-+ */
-+ if ((start + size > __pa_symbol(_text)
-+ && start <= __pa_symbol(_end)) ||
-+ !e820_all_mapped(start, start+size, E820_RAM) ||
-+ memblock_is_region_reserved(start, size)) {
-+ /* Could not reserve, skip it */
-+ md->num_pages = 0;
-+ memblock_dbg("Could not reserve boot range [0x%010llx-0x%010llx]\n",
-+ start, start+size-1);
-+ } else
-+ memblock_reserve(start, size);
-+ }
-+}
-+
-+void __init efi_free_boot_services(void)
-+{
-+ void *p;
-+
-+ for (p = memmap.map; p < memmap.map_end; p += memmap.desc_size) {
-+ efi_memory_desc_t *md = p;
-+ unsigned long long start = md->phys_addr;
-+ unsigned long long size = md->num_pages << EFI_PAGE_SHIFT;
-+
-+ if (md->type != EFI_BOOT_SERVICES_CODE &&
-+ md->type != EFI_BOOT_SERVICES_DATA)
-+ continue;
-+
-+ /* Could not reserve boot area */
-+ if (!size)
-+ continue;
-+
-+ free_bootmem_late(start, size);
-+ }
-+
-+ efi_unmap_memmap();
-+}
-+
-+/*
-+ * A number of config table entries get remapped to virtual addresses
-+ * after entering EFI virtual mode. However, the kexec kernel requires
-+ * their physical addresses therefore we pass them via setup_data and
-+ * correct those entries to their respective physical addresses here.
-+ *
-+ * Currently only handles smbios which is necessary for some firmware
-+ * implementation.
-+ */
-+int __init efi_reuse_config(u64 tables, int nr_tables)
-+{
-+ int i, sz, ret = 0;
-+ void *p, *tablep;
-+ struct efi_setup_data *data;
-+
-+ if (!efi_setup)
-+ return 0;
-+
-+ if (!efi_enabled(EFI_64BIT))
-+ return 0;
-+
-+ data = early_memremap(efi_setup, sizeof(*data));
-+ if (!data) {
-+ ret = -ENOMEM;
-+ goto out;
-+ }
-+
-+ if (!data->smbios)
-+ goto out_memremap;
-+
-+ sz = sizeof(efi_config_table_64_t);
-+
-+ p = tablep = early_memremap(tables, nr_tables * sz);
-+ if (!p) {
-+ pr_err("Could not map Configuration table!\n");
-+ ret = -ENOMEM;
-+ goto out_memremap;
-+ }
-+
-+ for (i = 0; i < efi.systab->nr_tables; i++) {
-+ efi_guid_t guid;
-+
-+ guid = ((efi_config_table_64_t *)p)->guid;
-+
-+ if (!efi_guidcmp(guid, SMBIOS_TABLE_GUID))
-+ ((efi_config_table_64_t *)p)->table = data->smbios;
-+ p += sz;
-+ }
-+ early_iounmap(tablep, nr_tables * sz);
-+
-+out_memremap:
-+ early_iounmap(data, sizeof(*data));
-+out:
-+ return ret;
-+}
-+
-+void __init efi_apply_memmap_quirks(void)
-+{
-+ /*
-+ * Once setup is done earlier, unmap the EFI memory map on mismatched
-+ * firmware/kernel architectures since there is no support for runtime
-+ * services.
-+ */
-+ if (!efi_runtime_supported()) {
-+ pr_info("efi: Setup done, disabling due to 32/64-bit mismatch\n");
-+ efi_unmap_memmap();
-+ }
-+
-+ /*
-+ * UV doesn't support the new EFI pagetable mapping yet.
-+ */
-+ if (is_uv_system())
-+ set_bit(EFI_OLD_MEMMAP, &efi.flags);
-+}
-+
-+/*
-+ * For most modern platforms the preferred method of powering off is via
-+ * ACPI. However, there are some that are known to require the use of
-+ * EFI runtime services and for which ACPI does not work at all.
-+ *
-+ * Using EFI is a last resort, to be used only if no other option
-+ * exists.
-+ */
-+bool efi_reboot_required(void)
-+{
-+ if (!acpi_gbl_reduced_hardware)
-+ return false;
-+
-+ efi_reboot_quirk_mode = EFI_RESET_WARM;
-+ return true;
-+}
-+
-+bool efi_poweroff_required(void)
-+{
-+ return !!acpi_gbl_reduced_hardware;
-+}
diff --git a/drivers/ata/ahci_xgene.c b/drivers/ata/ahci_xgene.c
-index ee3a365..f9431b4 100644
+index bc28111..00e5a0c 100644
--- a/drivers/ata/ahci_xgene.c
+++ b/drivers/ata/ahci_xgene.c
-@@ -131,7 +131,8 @@ static unsigned int xgene_ahci_qc_issue(struct ata_queued_cmd *qc)
+@@ -134,7 +134,8 @@ static unsigned int xgene_ahci_qc_issue(struct ata_queued_cmd *qc)
struct xgene_ahci_context *ctx = hpriv->plat_data;
int rc = 0;
@@ -3630,1050 +1857,11 @@ index ee3a365..f9431b4 100644
xgene_ahci_restart_engine(ap);
rc = ahci_qc_issue(qc);
-diff --git a/drivers/firmware/efi/Makefile b/drivers/firmware/efi/Makefile
-index 9553496..c135154 100644
---- a/drivers/firmware/efi/Makefile
-+++ b/drivers/firmware/efi/Makefile
-@@ -1,7 +1,7 @@
- #
- # Makefile for linux kernel
- #
--obj-$(CONFIG_EFI) += efi.o vars.o
-+obj-$(CONFIG_EFI) += efi.o vars.o reboot.o
- obj-$(CONFIG_EFI_VARS) += efivars.o
- obj-$(CONFIG_EFI_VARS_PSTORE) += efi-pstore.o
- obj-$(CONFIG_UEFI_CPER) += cper.o
-diff --git a/drivers/firmware/efi/reboot.c b/drivers/firmware/efi/reboot.c
-new file mode 100644
-index 0000000..f94fb95
---- /dev/null
-+++ b/drivers/firmware/efi/reboot.c
-@@ -0,0 +1,55 @@
-+/*
-+ * Copyright (C) 2014 Intel Corporation; author Matt Fleming
-+ */
-+#include <linux/efi.h>
-+#include <linux/reboot.h>
-+
-+int efi_reboot_quirk_mode = -1;
-+
-+void efi_reboot(enum reboot_mode reboot_mode, const char *__unused)
-+{
-+ int efi_mode;
-+
-+ if (!efi_enabled(EFI_RUNTIME_SERVICES))
-+ return;
-+
-+ switch (reboot_mode) {
-+ case REBOOT_WARM:
-+ case REBOOT_SOFT:
-+ efi_mode = EFI_RESET_WARM;
-+ break;
-+ default:
-+ efi_mode = EFI_RESET_COLD;
-+ break;
-+ }
-+
-+ /*
-+ * If a quirk forced an EFI reset mode, always use that.
-+ */
-+ if (efi_reboot_quirk_mode != -1)
-+ efi_mode = efi_reboot_quirk_mode;
-+
-+ efi.reset_system(efi_mode, EFI_SUCCESS, 0, NULL);
-+}
-+
-+bool __weak efi_poweroff_required(void)
-+{
-+ return false;
-+}
-+
-+static void efi_power_off(void)
-+{
-+ efi.reset_system(EFI_RESET_SHUTDOWN, EFI_SUCCESS, 0, NULL);
-+}
-+
-+static int __init efi_shutdown_init(void)
-+{
-+ if (!efi_enabled(EFI_RUNTIME_SERVICES))
-+ return -ENODEV;
-+
-+ if (efi_poweroff_required())
-+ pm_power_off = efi_power_off;
-+
-+ return 0;
-+}
-+late_initcall(efi_shutdown_init);
-diff --git a/drivers/irqchip/Kconfig b/drivers/irqchip/Kconfig
-index bbb746e..7f0c2a3 100644
---- a/drivers/irqchip/Kconfig
-+++ b/drivers/irqchip/Kconfig
-@@ -10,6 +10,11 @@ config ARM_GIC
- config GIC_NON_BANKED
- bool
-
-+config ARM_GIC_V3
-+ bool
-+ select IRQ_DOMAIN
-+ select MULTI_IRQ_HANDLER
-+
- config ARM_NVIC
- bool
- select IRQ_DOMAIN
-diff --git a/drivers/irqchip/Makefile b/drivers/irqchip/Makefile
-index 62a13e5..c57e642 100644
---- a/drivers/irqchip/Makefile
-+++ b/drivers/irqchip/Makefile
-@@ -15,7 +15,8 @@ obj-$(CONFIG_ORION_IRQCHIP) += irq-orion.o
- obj-$(CONFIG_ARCH_SUNXI) += irq-sun4i.o
- obj-$(CONFIG_ARCH_SUNXI) += irq-sunxi-nmi.o
- obj-$(CONFIG_ARCH_SPEAR3XX) += spear-shirq.o
--obj-$(CONFIG_ARM_GIC) += irq-gic.o
-+obj-$(CONFIG_ARM_GIC) += irq-gic.o irq-gic-common.o
-+obj-$(CONFIG_ARM_GIC_V3) += irq-gic-v3.o irq-gic-common.o
- obj-$(CONFIG_ARM_NVIC) += irq-nvic.o
- obj-$(CONFIG_ARM_VIC) += irq-vic.o
- obj-$(CONFIG_IMGPDC_IRQ) += irq-imgpdc.o
-diff --git a/drivers/irqchip/irq-gic-common.c b/drivers/irqchip/irq-gic-common.c
-new file mode 100644
-index 0000000..60ac704
---- /dev/null
-+++ b/drivers/irqchip/irq-gic-common.c
-@@ -0,0 +1,115 @@
-+/*
-+ * Copyright (C) 2002 ARM Limited, All Rights Reserved.
-+ *
-+ * This program is free software; you can redistribute it and/or modify
-+ * it under the terms of the GNU General Public License version 2 as
-+ * published by the Free Software Foundation.
-+ *
-+ * This program is distributed in the hope that it will be useful,
-+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
-+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-+ * GNU General Public License for more details.
-+ *
-+ * You should have received a copy of the GNU General Public License
-+ * along with this program. If not, see <http://www.gnu.org/licenses/>.
-+ */
-+
-+#include <linux/interrupt.h>
-+#include <linux/io.h>
-+#include <linux/irq.h>
-+#include <linux/irqchip/arm-gic.h>
-+
-+#include "irq-gic-common.h"
-+
-+void gic_configure_irq(unsigned int irq, unsigned int type,
-+ void __iomem *base, void (*sync_access)(void))
-+{
-+ u32 enablemask = 1 << (irq % 32);
-+ u32 enableoff = (irq / 32) * 4;
-+ u32 confmask = 0x2 << ((irq % 16) * 2);
-+ u32 confoff = (irq / 16) * 4;
-+ bool enabled = false;
-+ u32 val;
-+
-+ /*
-+ * Read current configuration register, and insert the config
-+ * for "irq", depending on "type".
-+ */
-+ val = readl_relaxed(base + GIC_DIST_CONFIG + confoff);
-+ if (type == IRQ_TYPE_LEVEL_HIGH)
-+ val &= ~confmask;
-+ else if (type == IRQ_TYPE_EDGE_RISING)
-+ val |= confmask;
-+
-+ /*
-+ * As recommended by the spec, disable the interrupt before changing
-+ * the configuration
-+ */
-+ if (readl_relaxed(base + GIC_DIST_ENABLE_SET + enableoff) & enablemask) {
-+ writel_relaxed(enablemask, base + GIC_DIST_ENABLE_CLEAR + enableoff);
-+ if (sync_access)
-+ sync_access();
-+ enabled = true;
-+ }
-+
-+ /*
-+ * Write back the new configuration, and possibly re-enable
-+ * the interrupt.
-+ */
-+ writel_relaxed(val, base + GIC_DIST_CONFIG + confoff);
-+
-+ if (enabled)
-+ writel_relaxed(enablemask, base + GIC_DIST_ENABLE_SET + enableoff);
-+
-+ if (sync_access)
-+ sync_access();
-+}
-+
-+void __init gic_dist_config(void __iomem *base, int gic_irqs,
-+ void (*sync_access)(void))
-+{
-+ unsigned int i;
-+
-+ /*
-+ * Set all global interrupts to be level triggered, active low.
-+ */
-+ for (i = 32; i < gic_irqs; i += 16)
-+ writel_relaxed(0, base + GIC_DIST_CONFIG + i / 4);
-+
-+ /*
-+ * Set priority on all global interrupts.
-+ */
-+ for (i = 32; i < gic_irqs; i += 4)
-+ writel_relaxed(0xa0a0a0a0, base + GIC_DIST_PRI + i);
-+
-+ /*
-+ * Disable all interrupts. Leave the PPI and SGIs alone
-+ * as they are enabled by redistributor registers.
-+ */
-+ for (i = 32; i < gic_irqs; i += 32)
-+ writel_relaxed(0xffffffff, base + GIC_DIST_ENABLE_CLEAR + i / 8);
-+
-+ if (sync_access)
-+ sync_access();
-+}
-+
-+void gic_cpu_config(void __iomem *base, void (*sync_access)(void))
-+{
-+ int i;
-+
-+ /*
-+ * Deal with the banked PPI and SGI interrupts - disable all
-+ * PPI interrupts, ensure all SGI interrupts are enabled.
-+ */
-+ writel_relaxed(0xffff0000, base + GIC_DIST_ENABLE_CLEAR);
-+ writel_relaxed(0x0000ffff, base + GIC_DIST_ENABLE_SET);
-+
-+ /*
-+ * Set priority on PPI and SGI interrupts
-+ */
-+ for (i = 0; i < 32; i += 4)
-+ writel_relaxed(0xa0a0a0a0, base + GIC_DIST_PRI + i * 4 / 4);
-+
-+ if (sync_access)
-+ sync_access();
-+}
-diff --git a/drivers/irqchip/irq-gic-common.h b/drivers/irqchip/irq-gic-common.h
-new file mode 100644
-index 0000000..b41f024
---- /dev/null
-+++ b/drivers/irqchip/irq-gic-common.h
-@@ -0,0 +1,29 @@
-+/*
-+ * Copyright (C) 2002 ARM Limited, All Rights Reserved.
-+ *
-+ * This program is free software; you can redistribute it and/or modify
-+ * it under the terms of the GNU General Public License version 2 as
-+ * published by the Free Software Foundation.
-+ *
-+ * This program is distributed in the hope that it will be useful,
-+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
-+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-+ * GNU General Public License for more details.
-+ *
-+ * You should have received a copy of the GNU General Public License
-+ * along with this program. If not, see <http://www.gnu.org/licenses/>.
-+ */
-+
-+#ifndef _IRQ_GIC_COMMON_H
-+#define _IRQ_GIC_COMMON_H
-+
-+#include <linux/of.h>
-+#include <linux/irqdomain.h>
-+
-+void gic_configure_irq(unsigned int irq, unsigned int type,
-+ void __iomem *base, void (*sync_access)(void));
-+void gic_dist_config(void __iomem *base, int gic_irqs,
-+ void (*sync_access)(void));
-+void gic_cpu_config(void __iomem *base, void (*sync_access)(void));
-+
-+#endif /* _IRQ_GIC_COMMON_H */
-diff --git a/drivers/irqchip/irq-gic-v3.c b/drivers/irqchip/irq-gic-v3.c
-new file mode 100644
-index 0000000..81519ba
---- /dev/null
-+++ b/drivers/irqchip/irq-gic-v3.c
-@@ -0,0 +1,692 @@
-+/*
-+ * Copyright (C) 2013, 2014 ARM Limited, All Rights Reserved.
-+ * Author: Marc Zyngier <marc.zyngier@arm.com>
-+ *
-+ * This program is free software; you can redistribute it and/or modify
-+ * it under the terms of the GNU General Public License version 2 as
-+ * published by the Free Software Foundation.
-+ *
-+ * This program is distributed in the hope that it will be useful,
-+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
-+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-+ * GNU General Public License for more details.
-+ *
-+ * You should have received a copy of the GNU General Public License
-+ * along with this program. If not, see <http://www.gnu.org/licenses/>.
-+ */
-+
-+#include <linux/cpu.h>
-+#include <linux/delay.h>
-+#include <linux/interrupt.h>
-+#include <linux/of.h>
-+#include <linux/of_address.h>
-+#include <linux/of_irq.h>
-+#include <linux/percpu.h>
-+#include <linux/slab.h>
-+
-+#include <linux/irqchip/arm-gic-v3.h>
-+
-+#include <asm/cputype.h>
-+#include <asm/exception.h>
-+#include <asm/smp_plat.h>
-+
-+#include "irq-gic-common.h"
-+#include "irqchip.h"
-+
-+struct gic_chip_data {
-+ void __iomem *dist_base;
-+ void __iomem **redist_base;
-+ void __percpu __iomem **rdist;
-+ struct irq_domain *domain;
-+ u64 redist_stride;
-+ u32 redist_regions;
-+ unsigned int irq_nr;
-+};
-+
-+static struct gic_chip_data gic_data __read_mostly;
-+
-+#define gic_data_rdist() (this_cpu_ptr(gic_data.rdist))
-+#define gic_data_rdist_rd_base() (*gic_data_rdist())
-+#define gic_data_rdist_sgi_base() (gic_data_rdist_rd_base() + SZ_64K)
-+
-+/* Our default, arbitrary priority value. Linux only uses one anyway. */
-+#define DEFAULT_PMR_VALUE 0xf0
-+
-+static inline unsigned int gic_irq(struct irq_data *d)
-+{
-+ return d->hwirq;
-+}
-+
-+static inline int gic_irq_in_rdist(struct irq_data *d)
-+{
-+ return gic_irq(d) < 32;
-+}
-+
-+static inline void __iomem *gic_dist_base(struct irq_data *d)
-+{
-+ if (gic_irq_in_rdist(d)) /* SGI+PPI -> SGI_base for this CPU */
-+ return gic_data_rdist_sgi_base();
-+
-+ if (d->hwirq <= 1023) /* SPI -> dist_base */
-+ return gic_data.dist_base;
-+
-+ if (d->hwirq >= 8192)
-+ BUG(); /* LPI Detected!!! */
-+
-+ return NULL;
-+}
-+
-+static void gic_do_wait_for_rwp(void __iomem *base)
-+{
-+ u32 count = 1000000; /* 1s! */
-+
-+ while (readl_relaxed(base + GICD_CTLR) & GICD_CTLR_RWP) {
-+ count--;
-+ if (!count) {
-+ pr_err_ratelimited("RWP timeout, gone fishing\n");
-+ return;
-+ }
-+ cpu_relax();
-+ udelay(1);
-+ };
-+}
-+
-+/* Wait for completion of a distributor change */
-+static void gic_dist_wait_for_rwp(void)
-+{
-+ gic_do_wait_for_rwp(gic_data.dist_base);
-+}
-+
-+/* Wait for completion of a redistributor change */
-+static void gic_redist_wait_for_rwp(void)
-+{
-+ gic_do_wait_for_rwp(gic_data_rdist_rd_base());
-+}
-+
-+/* Low level accessors */
-+static u64 gic_read_iar(void)
-+{
-+ u64 irqstat;
-+
-+ asm volatile("mrs %0, " __stringify(ICC_IAR1_EL1) : "=r" (irqstat));
-+ return irqstat;
-+}
-+
-+static void gic_write_pmr(u64 val)
-+{
-+ asm volatile("msr " __stringify(ICC_PMR_EL1) ", %0" : : "r" (val));
-+}
-+
-+static void gic_write_ctlr(u64 val)
-+{
-+ asm volatile("msr " __stringify(ICC_CTLR_EL1) ", %0" : : "r" (val));
-+ isb();
-+}
-+
-+static void gic_write_grpen1(u64 val)
-+{
-+ asm volatile("msr " __stringify(ICC_GRPEN1_EL1) ", %0" : : "r" (val));
-+ isb();
-+}
-+
-+static void gic_write_sgi1r(u64 val)
-+{
-+ asm volatile("msr " __stringify(ICC_SGI1R_EL1) ", %0" : : "r" (val));
-+}
-+
-+static void gic_enable_sre(void)
-+{
-+ u64 val;
-+
-+ asm volatile("mrs %0, " __stringify(ICC_SRE_EL1) : "=r" (val));
-+ val |= ICC_SRE_EL1_SRE;
-+ asm volatile("msr " __stringify(ICC_SRE_EL1) ", %0" : : "r" (val));
-+ isb();
-+
-+ /*
-+ * Need to check that the SRE bit has actually been set. If
-+ * not, it means that SRE is disabled at EL2. We're going to
-+ * die painfully, and there is nothing we can do about it.
-+ *
-+ * Kindly inform the luser.
-+ */
-+ asm volatile("mrs %0, " __stringify(ICC_SRE_EL1) : "=r" (val));
-+ if (!(val & ICC_SRE_EL1_SRE))
-+ pr_err("GIC: unable to set SRE (disabled at EL2), panic ahead\n");
-+}
-+
-+static void gic_enable_redist(void)
-+{
-+ void __iomem *rbase;
-+ u32 count = 1000000; /* 1s! */
-+ u32 val;
-+
-+ rbase = gic_data_rdist_rd_base();
-+
-+ /* Wake up this CPU redistributor */
-+ val = readl_relaxed(rbase + GICR_WAKER);
-+ val &= ~GICR_WAKER_ProcessorSleep;
-+ writel_relaxed(val, rbase + GICR_WAKER);
-+
-+ while (readl_relaxed(rbase + GICR_WAKER) & GICR_WAKER_ChildrenAsleep) {
-+ count--;
-+ if (!count) {
-+ pr_err_ratelimited("redist didn't wake up...\n");
-+ return;
-+ }
-+ cpu_relax();
-+ udelay(1);
-+ };
-+}
-+
-+/*
-+ * Routines to disable, enable, EOI and route interrupts
-+ */
-+static void gic_poke_irq(struct irq_data *d, u32 offset)
-+{
-+ u32 mask = 1 << (gic_irq(d) % 32);
-+ void (*rwp_wait)(void);
-+ void __iomem *base;
-+
-+ if (gic_irq_in_rdist(d)) {
-+ base = gic_data_rdist_sgi_base();
-+ rwp_wait = gic_redist_wait_for_rwp;
-+ } else {
-+ base = gic_data.dist_base;
-+ rwp_wait = gic_dist_wait_for_rwp;
-+ }
-+
-+ writel_relaxed(mask, base + offset + (gic_irq(d) / 32) * 4);
-+ rwp_wait();
-+}
-+
-+static int gic_peek_irq(struct irq_data *d, u32 offset)
-+{
-+ u32 mask = 1 << (gic_irq(d) % 32);
-+ void __iomem *base;
-+
-+ if (gic_irq_in_rdist(d))
-+ base = gic_data_rdist_sgi_base();
-+ else
-+ base = gic_data.dist_base;
-+
-+ return !!(readl_relaxed(base + offset + (gic_irq(d) / 32) * 4) & mask);
-+}
-+
-+static void gic_mask_irq(struct irq_data *d)
-+{
-+ gic_poke_irq(d, GICD_ICENABLER);
-+}
-+
-+static void gic_unmask_irq(struct irq_data *d)
-+{
-+ gic_poke_irq(d, GICD_ISENABLER);
-+}
-+
-+static void gic_eoi_irq(struct irq_data *d)
-+{
-+ gic_write_eoir(gic_irq(d));
-+}
-+
-+static int gic_set_type(struct irq_data *d, unsigned int type)
-+{
-+ unsigned int irq = gic_irq(d);
-+ void (*rwp_wait)(void);
-+ void __iomem *base;
-+
-+ /* Interrupt configuration for SGIs can't be changed */
-+ if (irq < 16)
-+ return -EINVAL;
-+
-+ if (type != IRQ_TYPE_LEVEL_HIGH && type != IRQ_TYPE_EDGE_RISING)
-+ return -EINVAL;
-+
-+ if (gic_irq_in_rdist(d)) {
-+ base = gic_data_rdist_sgi_base();
-+ rwp_wait = gic_redist_wait_for_rwp;
-+ } else {
-+ base = gic_data.dist_base;
-+ rwp_wait = gic_dist_wait_for_rwp;
-+ }
-+
-+ gic_configure_irq(irq, type, base, rwp_wait);
-+
-+ return 0;
-+}
-+
-+static u64 gic_mpidr_to_affinity(u64 mpidr)
-+{
-+ u64 aff;
-+
-+ aff = (MPIDR_AFFINITY_LEVEL(mpidr, 3) << 32 |
-+ MPIDR_AFFINITY_LEVEL(mpidr, 2) << 16 |
-+ MPIDR_AFFINITY_LEVEL(mpidr, 1) << 8 |
-+ MPIDR_AFFINITY_LEVEL(mpidr, 0));
-+
-+ return aff;
-+}
-+
-+static asmlinkage void __exception_irq_entry gic_handle_irq(struct pt_regs *regs)
-+{
-+ u64 irqnr;
-+
-+ do {
-+ irqnr = gic_read_iar();
-+
-+ if (likely(irqnr > 15 && irqnr < 1020)) {
-+ u64 irq = irq_find_mapping(gic_data.domain, irqnr);
-+ if (likely(irq)) {
-+ handle_IRQ(irq, regs);
-+ continue;
-+ }
-+
-+ WARN_ONCE(true, "Unexpected SPI received!\n");
-+ gic_write_eoir(irqnr);
-+ }
-+ if (irqnr < 16) {
-+ gic_write_eoir(irqnr);
-+#ifdef CONFIG_SMP
-+ handle_IPI(irqnr, regs);
-+#else
-+ WARN_ONCE(true, "Unexpected SGI received!\n");
-+#endif
-+ continue;
-+ }
-+ } while (irqnr != ICC_IAR1_EL1_SPURIOUS);
-+}
-+
-+static void __init gic_dist_init(void)
-+{
-+ unsigned int i;
-+ u64 affinity;
-+ void __iomem *base = gic_data.dist_base;
-+
-+ /* Disable the distributor */
-+ writel_relaxed(0, base + GICD_CTLR);
-+ gic_dist_wait_for_rwp();
-+
-+ gic_dist_config(base, gic_data.irq_nr, gic_dist_wait_for_rwp);
-+
-+ /* Enable distributor with ARE, Group1 */
-+ writel_relaxed(GICD_CTLR_ARE_NS | GICD_CTLR_ENABLE_G1A | GICD_CTLR_ENABLE_G1,
-+ base + GICD_CTLR);
-+
-+ /*
-+ * Set all global interrupts to the boot CPU only. ARE must be
-+ * enabled.
-+ */
-+ affinity = gic_mpidr_to_affinity(cpu_logical_map(smp_processor_id()));
-+ for (i = 32; i < gic_data.irq_nr; i++)
-+ writeq_relaxed(affinity, base + GICD_IROUTER + i * 8);
-+}
-+
-+static int gic_populate_rdist(void)
-+{
-+ u64 mpidr = cpu_logical_map(smp_processor_id());
-+ u64 typer;
-+ u32 aff;
-+ int i;
-+
-+ /*
-+ * Convert affinity to a 32bit value that can be matched to
-+ * GICR_TYPER bits [63:32].
-+ */
-+ aff = (MPIDR_AFFINITY_LEVEL(mpidr, 3) << 24 |
-+ MPIDR_AFFINITY_LEVEL(mpidr, 2) << 16 |
-+ MPIDR_AFFINITY_LEVEL(mpidr, 1) << 8 |
-+ MPIDR_AFFINITY_LEVEL(mpidr, 0));
-+
-+ for (i = 0; i < gic_data.redist_regions; i++) {
-+ void __iomem *ptr = gic_data.redist_base[i];
-+ u32 reg;
-+
-+ reg = readl_relaxed(ptr + GICR_PIDR2) & GIC_PIDR2_ARCH_MASK;
-+ if (reg != GIC_PIDR2_ARCH_GICv3 &&
-+ reg != GIC_PIDR2_ARCH_GICv4) { /* We're in trouble... */
-+ pr_warn("No redistributor present @%p\n", ptr);
-+ break;
-+ }
-+
-+ do {
-+ typer = readq_relaxed(ptr + GICR_TYPER);
-+ if ((typer >> 32) == aff) {
-+ gic_data_rdist_rd_base() = ptr;
-+ pr_info("CPU%d: found redistributor %llx @%p\n",
-+ smp_processor_id(),
-+ (unsigned long long)mpidr, ptr);
-+ return 0;
-+ }
-+
-+ if (gic_data.redist_stride) {
-+ ptr += gic_data.redist_stride;
-+ } else {
-+ ptr += SZ_64K * 2; /* Skip RD_base + SGI_base */
-+ if (typer & GICR_TYPER_VLPIS)
-+ ptr += SZ_64K * 2; /* Skip VLPI_base + reserved page */
-+ }
-+ } while (!(typer & GICR_TYPER_LAST));
-+ }
-+
-+ /* We couldn't even deal with ourselves... */
-+ WARN(true, "CPU%d: mpidr %llx has no re-distributor!\n",
-+ smp_processor_id(), (unsigned long long)mpidr);
-+ return -ENODEV;
-+}
-+
-+static void gic_cpu_init(void)
-+{
-+ void __iomem *rbase;
-+
-+ /* Register ourselves with the rest of the world */
-+ if (gic_populate_rdist())
-+ return;
-+
-+ gic_enable_redist();
-+
-+ rbase = gic_data_rdist_sgi_base();
-+
-+ gic_cpu_config(rbase, gic_redist_wait_for_rwp);
-+
-+ /* Enable system registers */
-+ gic_enable_sre();
-+
-+ /* Set priority mask register */
-+ gic_write_pmr(DEFAULT_PMR_VALUE);
-+
-+ /* EOI deactivates interrupt too (mode 0) */
-+ gic_write_ctlr(ICC_CTLR_EL1_EOImode_drop_dir);
-+
-+ /* ... and let's hit the road... */
-+ gic_write_grpen1(1);
-+}
-+
-+#ifdef CONFIG_SMP
-+static int gic_secondary_init(struct notifier_block *nfb,
-+ unsigned long action, void *hcpu)
-+{
-+ if (action == CPU_STARTING || action == CPU_STARTING_FROZEN)
-+ gic_cpu_init();
-+ return NOTIFY_OK;
-+}
-+
-+/*
-+ * Notifier for enabling the GIC CPU interface. Set an arbitrarily high
-+ * priority because the GIC needs to be up before the ARM generic timers.
-+ */
-+static struct notifier_block gic_cpu_notifier = {
-+ .notifier_call = gic_secondary_init,
-+ .priority = 100,
-+};
-+
-+static u16 gic_compute_target_list(int *base_cpu, const struct cpumask *mask,
-+ u64 cluster_id)
-+{
-+ int cpu = *base_cpu;
-+ u64 mpidr = cpu_logical_map(cpu);
-+ u16 tlist = 0;
-+
-+ while (cpu < nr_cpu_ids) {
-+ /*
-+ * If we ever get a cluster of more than 16 CPUs, just
-+ * scream and skip that CPU.
-+ */
-+ if (WARN_ON((mpidr & 0xff) >= 16))
-+ goto out;
-+
-+ tlist |= 1 << (mpidr & 0xf);
-+
-+ cpu = cpumask_next(cpu, mask);
-+ if (cpu == nr_cpu_ids)
-+ goto out;
-+
-+ mpidr = cpu_logical_map(cpu);
-+
-+ if (cluster_id != (mpidr & ~0xffUL)) {
-+ cpu--;
-+ goto out;
-+ }
-+ }
-+out:
-+ *base_cpu = cpu;
-+ return tlist;
-+}
-+
-+static void gic_send_sgi(u64 cluster_id, u16 tlist, unsigned int irq)
-+{
-+ u64 val;
-+
-+ val = (MPIDR_AFFINITY_LEVEL(cluster_id, 3) << 48 |
-+ MPIDR_AFFINITY_LEVEL(cluster_id, 2) << 32 |
-+ irq << 24 |
-+ MPIDR_AFFINITY_LEVEL(cluster_id, 1) << 16 |
-+ tlist);
-+
-+ pr_debug("CPU%d: ICC_SGI1R_EL1 %llx\n", smp_processor_id(), val);
-+ gic_write_sgi1r(val);
-+}
-+
-+static void gic_raise_softirq(const struct cpumask *mask, unsigned int irq)
-+{
-+ int cpu;
-+
-+ if (WARN_ON(irq >= 16))
-+ return;
-+
-+ /*
-+ * Ensure that stores to Normal memory are visible to the
-+ * other CPUs before issuing the IPI.
-+ */
-+ smp_wmb();
-+
-+ for_each_cpu_mask(cpu, *mask) {
-+ u64 cluster_id = cpu_logical_map(cpu) & ~0xffUL;
-+ u16 tlist;
-+
-+ tlist = gic_compute_target_list(&cpu, mask, cluster_id);
-+ gic_send_sgi(cluster_id, tlist, irq);
-+ }
-+
-+ /* Force the above writes to ICC_SGI1R_EL1 to be executed */
-+ isb();
-+}
-+
-+static void gic_smp_init(void)
-+{
-+ set_smp_cross_call(gic_raise_softirq);
-+ register_cpu_notifier(&gic_cpu_notifier);
-+}
-+
-+static int gic_set_affinity(struct irq_data *d, const struct cpumask *mask_val,
-+ bool force)
-+{
-+ unsigned int cpu = cpumask_any_and(mask_val, cpu_online_mask);
-+ void __iomem *reg;
-+ int enabled;
-+ u64 val;
-+
-+ if (gic_irq_in_rdist(d))
-+ return -EINVAL;
-+
-+ /* If interrupt was enabled, disable it first */
-+ enabled = gic_peek_irq(d, GICD_ISENABLER);
-+ if (enabled)
-+ gic_mask_irq(d);
-+
-+ reg = gic_dist_base(d) + GICD_IROUTER + (gic_irq(d) * 8);
-+ val = gic_mpidr_to_affinity(cpu_logical_map(cpu));
-+
-+ writeq_relaxed(val, reg);
-+
-+ /*
-+ * If the interrupt was enabled, enabled it again. Otherwise,
-+ * just wait for the distributor to have digested our changes.
-+ */
-+ if (enabled)
-+ gic_unmask_irq(d);
-+ else
-+ gic_dist_wait_for_rwp();
-+
-+ return IRQ_SET_MASK_OK;
-+}
-+#else
-+#define gic_set_affinity NULL
-+#define gic_smp_init() do { } while(0)
-+#endif
-+
-+static struct irq_chip gic_chip = {
-+ .name = "GICv3",
-+ .irq_mask = gic_mask_irq,
-+ .irq_unmask = gic_unmask_irq,
-+ .irq_eoi = gic_eoi_irq,
-+ .irq_set_type = gic_set_type,
-+ .irq_set_affinity = gic_set_affinity,
-+};
-+
-+static int gic_irq_domain_map(struct irq_domain *d, unsigned int irq,
-+ irq_hw_number_t hw)
-+{
-+ /* SGIs are private to the core kernel */
-+ if (hw < 16)
-+ return -EPERM;
-+ /* PPIs */
-+ if (hw < 32) {
-+ irq_set_percpu_devid(irq);
-+ irq_set_chip_and_handler(irq, &gic_chip,
-+ handle_percpu_devid_irq);
-+ set_irq_flags(irq, IRQF_VALID | IRQF_NOAUTOEN);
-+ }
-+ /* SPIs */
-+ if (hw >= 32 && hw < gic_data.irq_nr) {
-+ irq_set_chip_and_handler(irq, &gic_chip,
-+ handle_fasteoi_irq);
-+ set_irq_flags(irq, IRQF_VALID | IRQF_PROBE);
-+ }
-+ irq_set_chip_data(irq, d->host_data);
-+ return 0;
-+}
-+
-+static int gic_irq_domain_xlate(struct irq_domain *d,
-+ struct device_node *controller,
-+ const u32 *intspec, unsigned int intsize,
-+ unsigned long *out_hwirq, unsigned int *out_type)
-+{
-+ if (d->of_node != controller)
-+ return -EINVAL;
-+ if (intsize < 3)
-+ return -EINVAL;
-+
-+ switch(intspec[0]) {
-+ case 0: /* SPI */
-+ *out_hwirq = intspec[1] + 32;
-+ break;
-+ case 1: /* PPI */
-+ *out_hwirq = intspec[1] + 16;
-+ break;
-+ default:
-+ return -EINVAL;
-+ }
-+
-+ *out_type = intspec[2] & IRQ_TYPE_SENSE_MASK;
-+ return 0;
-+}
-+
-+static const struct irq_domain_ops gic_irq_domain_ops = {
-+ .map = gic_irq_domain_map,
-+ .xlate = gic_irq_domain_xlate,
-+};
-+
-+static int __init gic_of_init(struct device_node *node, struct device_node *parent)
-+{
-+ void __iomem *dist_base;
-+ void __iomem **redist_base;
-+ u64 redist_stride;
-+ u32 redist_regions;
-+ u32 reg;
-+ int gic_irqs;
-+ int err;
-+ int i;
-+
-+ dist_base = of_iomap(node, 0);
-+ if (!dist_base) {
-+ pr_err("%s: unable to map gic dist registers\n",
-+ node->full_name);
-+ return -ENXIO;
-+ }
-+
-+ reg = readl_relaxed(dist_base + GICD_PIDR2) & GIC_PIDR2_ARCH_MASK;
-+ if (reg != GIC_PIDR2_ARCH_GICv3 && reg != GIC_PIDR2_ARCH_GICv4) {
-+ pr_err("%s: no distributor detected, giving up\n",
-+ node->full_name);
-+ err = -ENODEV;
-+ goto out_unmap_dist;
-+ }
-+
-+ if (of_property_read_u32(node, "#redistributor-regions", &redist_regions))
-+ redist_regions = 1;
-+
-+ redist_base = kzalloc(sizeof(*redist_base) * redist_regions, GFP_KERNEL);
-+ if (!redist_base) {
-+ err = -ENOMEM;
-+ goto out_unmap_dist;
-+ }
-+
-+ for (i = 0; i < redist_regions; i++) {
-+ redist_base[i] = of_iomap(node, 1 + i);
-+ if (!redist_base[i]) {
-+ pr_err("%s: couldn't map region %d\n",
-+ node->full_name, i);
-+ err = -ENODEV;
-+ goto out_unmap_rdist;
-+ }
-+ }
-+
-+ if (of_property_read_u64(node, "redistributor-stride", &redist_stride))
-+ redist_stride = 0;
-+
-+ gic_data.dist_base = dist_base;
-+ gic_data.redist_base = redist_base;
-+ gic_data.redist_regions = redist_regions;
-+ gic_data.redist_stride = redist_stride;
-+
-+ /*
-+ * Find out how many interrupts are supported.
-+ * The GIC only supports up to 1020 interrupt sources (SGI+PPI+SPI)
-+ */
-+ gic_irqs = readl_relaxed(gic_data.dist_base + GICD_TYPER) & 0x1f;
-+ gic_irqs = (gic_irqs + 1) * 32;
-+ if (gic_irqs > 1020)
-+ gic_irqs = 1020;
-+ gic_data.irq_nr = gic_irqs;
-+
-+ gic_data.domain = irq_domain_add_tree(node, &gic_irq_domain_ops,
-+ &gic_data);
-+ gic_data.rdist = alloc_percpu(typeof(*gic_data.rdist));
-+
-+ if (WARN_ON(!gic_data.domain) || WARN_ON(!gic_data.rdist)) {
-+ err = -ENOMEM;
-+ goto out_free;
-+ }
-+
-+ set_handle_irq(gic_handle_irq);
-+
-+ gic_smp_init();
-+ gic_dist_init();
-+ gic_cpu_init();
-+
-+ return 0;
-+
-+out_free:
-+ if (gic_data.domain)
-+ irq_domain_remove(gic_data.domain);
-+ free_percpu(gic_data.rdist);
-+out_unmap_rdist:
-+ for (i = 0; i < redist_regions; i++)
-+ if (redist_base[i])
-+ iounmap(redist_base[i]);
-+ kfree(redist_base);
-+out_unmap_dist:
-+ iounmap(dist_base);
-+ return err;
-+}
-+
-+IRQCHIP_DECLARE(gic_v3, "arm,gic-v3", gic_of_init);
diff --git a/drivers/irqchip/irq-gic.c b/drivers/irqchip/irq-gic.c
-index 7c131cf..1ddfdde 100644
+index 9c1f883..1ddfdde 100644
--- a/drivers/irqchip/irq-gic.c
+++ b/drivers/irqchip/irq-gic.c
-@@ -47,6 +47,7 @@
- #include <asm/exception.h>
- #include <asm/smp_plat.h>
-
-+#include "irq-gic-common.h"
- #include "irqchip.h"
-
- union gic_base {
-@@ -189,12 +190,6 @@ static int gic_set_type(struct irq_data *d, unsigned int type)
- {
- void __iomem *base = gic_dist_base(d);
- unsigned int gicirq = gic_irq(d);
-- u32 enablemask = 1 << (gicirq % 32);
-- u32 enableoff = (gicirq / 32) * 4;
-- u32 confmask = 0x2 << ((gicirq % 16) * 2);
-- u32 confoff = (gicirq / 16) * 4;
-- bool enabled = false;
-- u32 val;
-
- /* Interrupt configuration for SGIs can't be changed */
- if (gicirq < 16)
-@@ -208,25 +203,7 @@ static int gic_set_type(struct irq_data *d, unsigned int type)
- if (gic_arch_extn.irq_set_type)
- gic_arch_extn.irq_set_type(d, type);
-
-- val = readl_relaxed(base + GIC_DIST_CONFIG + confoff);
-- if (type == IRQ_TYPE_LEVEL_HIGH)
-- val &= ~confmask;
-- else if (type == IRQ_TYPE_EDGE_RISING)
-- val |= confmask;
--
-- /*
-- * As recommended by the spec, disable the interrupt before changing
-- * the configuration
-- */
-- if (readl_relaxed(base + GIC_DIST_ENABLE_SET + enableoff) & enablemask) {
-- writel_relaxed(enablemask, base + GIC_DIST_ENABLE_CLEAR + enableoff);
-- enabled = true;
-- }
--
-- writel_relaxed(val, base + GIC_DIST_CONFIG + confoff);
--
-- if (enabled)
-- writel_relaxed(enablemask, base + GIC_DIST_ENABLE_SET + enableoff);
-+ gic_configure_irq(gicirq, type, base, NULL);
-
- raw_spin_unlock(&irq_controller_lock);
-
-@@ -388,12 +365,6 @@ static void __init gic_dist_init(struct gic_chip_data *gic)
- writel_relaxed(0, base + GIC_DIST_CTRL);
-
- /*
-- * Set all global interrupts to be level triggered, active low.
-- */
-- for (i = 32; i < gic_irqs; i += 16)
-- writel_relaxed(0, base + GIC_DIST_CONFIG + i * 4 / 16);
--
-- /*
- * Set all global interrupts to this CPU only.
- */
- cpumask = gic_get_cpumask(gic);
-@@ -402,18 +373,7 @@ static void __init gic_dist_init(struct gic_chip_data *gic)
- for (i = 32; i < gic_irqs; i += 4)
- writel_relaxed(cpumask, base + GIC_DIST_TARGET + i * 4 / 4);
-
-- /*
-- * Set priority on all global interrupts.
-- */
-- for (i = 32; i < gic_irqs; i += 4)
-- writel_relaxed(0xa0a0a0a0, base + GIC_DIST_PRI + i * 4 / 4);
--
-- /*
-- * Disable all interrupts. Leave the PPI and SGIs alone
-- * as these enables are banked registers.
-- */
-- for (i = 32; i < gic_irqs; i += 32)
-- writel_relaxed(0xffffffff, base + GIC_DIST_ENABLE_CLEAR + i * 4 / 32);
-+ gic_dist_config(base, gic_irqs, NULL);
-
- writel_relaxed(1, base + GIC_DIST_CTRL);
- }
-@@ -423,6 +383,7 @@ static void gic_cpu_init(struct gic_chip_data *gic)
+@@ -383,6 +383,7 @@ static void gic_cpu_init(struct gic_chip_data *gic)
void __iomem *dist_base = gic_data_dist_base(gic);
void __iomem *base = gic_data_cpu_base(gic);
unsigned int cpu_mask, cpu = smp_processor_id();
@@ -4681,23 +1869,8 @@ index 7c131cf..1ddfdde 100644
int i;
/*
-@@ -440,27 +401,32 @@ static void gic_cpu_init(struct gic_chip_data *gic)
- if (i != cpu)
- gic_cpu_map[i] &= ~cpu_mask;
-
-- /*
-- * Deal with the banked PPI and SGI interrupts - disable all
-- * PPI interrupts, ensure all SGI interrupts are enabled.
-- */
-- writel_relaxed(0xffff0000, dist_base + GIC_DIST_ENABLE_CLEAR);
-- writel_relaxed(0x0000ffff, dist_base + GIC_DIST_ENABLE_SET);
--
-- /*
-- * Set priority on PPI and SGI interrupts
-- */
-- for (i = 0; i < 32; i += 4)
-- writel_relaxed(0xa0a0a0a0, dist_base + GIC_DIST_PRI + i * 4 / 4);
-+ gic_cpu_config(dist_base, NULL);
+@@ -403,13 +404,29 @@ static void gic_cpu_init(struct gic_chip_data *gic)
+ gic_cpu_config(dist_base, NULL);
writel_relaxed(0xf0, base + GIC_CPU_PRIMASK);
- writel_relaxed(1, base + GIC_CPU_CTRL);
@@ -4728,7 +1901,7 @@ index 7c131cf..1ddfdde 100644
}
#ifdef CONFIG_CPU_PM
-@@ -571,6 +537,7 @@ static void gic_cpu_restore(unsigned int gic_nr)
+@@ -520,6 +537,7 @@ static void gic_cpu_restore(unsigned int gic_nr)
{
int i;
u32 *ptr;
@@ -4736,7 +1909,7 @@ index 7c131cf..1ddfdde 100644
void __iomem *dist_base;
void __iomem *cpu_base;
-@@ -595,7 +562,15 @@ static void gic_cpu_restore(unsigned int gic_nr)
+@@ -544,7 +562,15 @@ static void gic_cpu_restore(unsigned int gic_nr)
writel_relaxed(0xa0a0a0a0, dist_base + GIC_DIST_PRI + i * 4);
writel_relaxed(0xf0, cpu_base + GIC_CPU_PRIMASK);
@@ -8256,7 +5429,7 @@ index 0000000..7bf4ac7
+MODULE_DESCRIPTION("APM X-Gene PCIe driver");
+MODULE_LICENSE("GPL v2");
diff --git a/drivers/pci/pci.c b/drivers/pci/pci.c
-index 1c8592b..b81dc68 100644
+index 2c9ac70..7bae0f9 100644
--- a/drivers/pci/pci.c
+++ b/drivers/pci/pci.c
@@ -17,6 +17,7 @@
@@ -8703,247 +5876,6 @@ index f27000f..35b0c12 100644
#else
static inline int kvm_vgic_hyp_init(void)
{
-diff --git a/include/linux/efi.h b/include/linux/efi.h
-index 41bbf8b..b3fac7c 100644
---- a/include/linux/efi.h
-+++ b/include/linux/efi.h
-@@ -20,6 +20,7 @@
- #include <linux/ioport.h>
- #include <linux/pfn.h>
- #include <linux/pstore.h>
-+#include <linux/reboot.h>
-
- #include <asm/page.h>
-
-@@ -875,6 +876,9 @@ extern void efi_reserve_boot_services(void);
- extern int efi_get_fdt_params(struct efi_fdt_params *params, int verbose);
- extern struct efi_memory_map memmap;
-
-+extern int efi_reboot_quirk_mode;
-+extern bool efi_poweroff_required(void);
-+
- /* Iterate through an efi_memory_map */
- #define for_each_efi_memory_desc(m, md) \
- for ((md) = (m)->map; \
-@@ -926,11 +930,14 @@ static inline bool efi_enabled(int feature)
- {
- return test_bit(feature, &efi.flags) != 0;
- }
-+extern void efi_reboot(enum reboot_mode reboot_mode, const char *__unused);
- #else
- static inline bool efi_enabled(int feature)
- {
- return false;
- }
-+static inline void
-+efi_reboot(enum reboot_mode reboot_mode, const char *__unused) {}
- #endif
-
- /*
-diff --git a/include/linux/irqchip/arm-gic-v3.h b/include/linux/irqchip/arm-gic-v3.h
-new file mode 100644
-index 0000000..30cb755
---- /dev/null
-+++ b/include/linux/irqchip/arm-gic-v3.h
-@@ -0,0 +1,198 @@
-+/*
-+ * Copyright (C) 2013, 2014 ARM Limited, All Rights Reserved.
-+ * Author: Marc Zyngier <marc.zyngier@arm.com>
-+ *
-+ *
-+ * This program is free software; you can redistribute it and/or modify
-+ * it under the terms of the GNU General Public License version 2 as
-+ * published by the Free Software Foundation.
-+ *
-+ * This program is distributed in the hope that it will be useful,
-+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
-+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-+ * GNU General Public License for more details.
-+ *
-+ * You should have received a copy of the GNU General Public License
-+ * along with this program. If not, see <http://www.gnu.org/licenses/>.
-+ */
-+#ifndef __LINUX_IRQCHIP_ARM_GIC_V3_H
-+#define __LINUX_IRQCHIP_ARM_GIC_V3_H
-+
-+/*
-+ * Distributor registers. We assume we're running non-secure, with ARE
-+ * being set. Secure-only and non-ARE registers are not described.
-+ */
-+#define GICD_CTLR 0x0000
-+#define GICD_TYPER 0x0004
-+#define GICD_IIDR 0x0008
-+#define GICD_STATUSR 0x0010
-+#define GICD_SETSPI_NSR 0x0040
-+#define GICD_CLRSPI_NSR 0x0048
-+#define GICD_SETSPI_SR 0x0050
-+#define GICD_CLRSPI_SR 0x0058
-+#define GICD_SEIR 0x0068
-+#define GICD_ISENABLER 0x0100
-+#define GICD_ICENABLER 0x0180
-+#define GICD_ISPENDR 0x0200
-+#define GICD_ICPENDR 0x0280
-+#define GICD_ISACTIVER 0x0300
-+#define GICD_ICACTIVER 0x0380
-+#define GICD_IPRIORITYR 0x0400
-+#define GICD_ICFGR 0x0C00
-+#define GICD_IROUTER 0x6000
-+#define GICD_PIDR2 0xFFE8
-+
-+#define GICD_CTLR_RWP (1U << 31)
-+#define GICD_CTLR_ARE_NS (1U << 4)
-+#define GICD_CTLR_ENABLE_G1A (1U << 1)
-+#define GICD_CTLR_ENABLE_G1 (1U << 0)
-+
-+#define GICD_IROUTER_SPI_MODE_ONE (0U << 31)
-+#define GICD_IROUTER_SPI_MODE_ANY (1U << 31)
-+
-+#define GIC_PIDR2_ARCH_MASK 0xf0
-+#define GIC_PIDR2_ARCH_GICv3 0x30
-+#define GIC_PIDR2_ARCH_GICv4 0x40
-+
-+/*
-+ * Re-Distributor registers, offsets from RD_base
-+ */
-+#define GICR_CTLR GICD_CTLR
-+#define GICR_IIDR 0x0004
-+#define GICR_TYPER 0x0008
-+#define GICR_STATUSR GICD_STATUSR
-+#define GICR_WAKER 0x0014
-+#define GICR_SETLPIR 0x0040
-+#define GICR_CLRLPIR 0x0048
-+#define GICR_SEIR GICD_SEIR
-+#define GICR_PROPBASER 0x0070
-+#define GICR_PENDBASER 0x0078
-+#define GICR_INVLPIR 0x00A0
-+#define GICR_INVALLR 0x00B0
-+#define GICR_SYNCR 0x00C0
-+#define GICR_MOVLPIR 0x0100
-+#define GICR_MOVALLR 0x0110
-+#define GICR_PIDR2 GICD_PIDR2
-+
-+#define GICR_WAKER_ProcessorSleep (1U << 1)
-+#define GICR_WAKER_ChildrenAsleep (1U << 2)
-+
-+/*
-+ * Re-Distributor registers, offsets from SGI_base
-+ */
-+#define GICR_ISENABLER0 GICD_ISENABLER
-+#define GICR_ICENABLER0 GICD_ICENABLER
-+#define GICR_ISPENDR0 GICD_ISPENDR
-+#define GICR_ICPENDR0 GICD_ICPENDR
-+#define GICR_ISACTIVER0 GICD_ISACTIVER
-+#define GICR_ICACTIVER0 GICD_ICACTIVER
-+#define GICR_IPRIORITYR0 GICD_IPRIORITYR
-+#define GICR_ICFGR0 GICD_ICFGR
-+
-+#define GICR_TYPER_VLPIS (1U << 1)
-+#define GICR_TYPER_LAST (1U << 4)
-+
-+/*
-+ * CPU interface registers
-+ */
-+#define ICC_CTLR_EL1_EOImode_drop_dir (0U << 1)
-+#define ICC_CTLR_EL1_EOImode_drop (1U << 1)
-+#define ICC_SRE_EL1_SRE (1U << 0)
-+
-+/*
-+ * Hypervisor interface registers (SRE only)
-+ */
-+#define ICH_LR_VIRTUAL_ID_MASK ((1UL << 32) - 1)
-+
-+#define ICH_LR_EOI (1UL << 41)
-+#define ICH_LR_GROUP (1UL << 60)
-+#define ICH_LR_STATE (3UL << 62)
-+#define ICH_LR_PENDING_BIT (1UL << 62)
-+#define ICH_LR_ACTIVE_BIT (1UL << 63)
-+
-+#define ICH_MISR_EOI (1 << 0)
-+#define ICH_MISR_U (1 << 1)
-+
-+#define ICH_HCR_EN (1 << 0)
-+#define ICH_HCR_UIE (1 << 1)
-+
-+#define ICH_VMCR_CTLR_SHIFT 0
-+#define ICH_VMCR_CTLR_MASK (0x21f << ICH_VMCR_CTLR_SHIFT)
-+#define ICH_VMCR_BPR1_SHIFT 18
-+#define ICH_VMCR_BPR1_MASK (7 << ICH_VMCR_BPR1_SHIFT)
-+#define ICH_VMCR_BPR0_SHIFT 21
-+#define ICH_VMCR_BPR0_MASK (7 << ICH_VMCR_BPR0_SHIFT)
-+#define ICH_VMCR_PMR_SHIFT 24
-+#define ICH_VMCR_PMR_MASK (0xffUL << ICH_VMCR_PMR_SHIFT)
-+
-+#define ICC_EOIR1_EL1 S3_0_C12_C12_1
-+#define ICC_IAR1_EL1 S3_0_C12_C12_0
-+#define ICC_SGI1R_EL1 S3_0_C12_C11_5
-+#define ICC_PMR_EL1 S3_0_C4_C6_0
-+#define ICC_CTLR_EL1 S3_0_C12_C12_4
-+#define ICC_SRE_EL1 S3_0_C12_C12_5
-+#define ICC_GRPEN1_EL1 S3_0_C12_C12_7
-+
-+#define ICC_IAR1_EL1_SPURIOUS 0x3ff
-+
-+#define ICC_SRE_EL2 S3_4_C12_C9_5
-+
-+#define ICC_SRE_EL2_SRE (1 << 0)
-+#define ICC_SRE_EL2_ENABLE (1 << 3)
-+
-+/*
-+ * System register definitions
-+ */
-+#define ICH_VSEIR_EL2 S3_4_C12_C9_4
-+#define ICH_HCR_EL2 S3_4_C12_C11_0
-+#define ICH_VTR_EL2 S3_4_C12_C11_1
-+#define ICH_MISR_EL2 S3_4_C12_C11_2
-+#define ICH_EISR_EL2 S3_4_C12_C11_3
-+#define ICH_ELSR_EL2 S3_4_C12_C11_5
-+#define ICH_VMCR_EL2 S3_4_C12_C11_7
-+
-+#define __LR0_EL2(x) S3_4_C12_C12_ ## x
-+#define __LR8_EL2(x) S3_4_C12_C13_ ## x
-+
-+#define ICH_LR0_EL2 __LR0_EL2(0)
-+#define ICH_LR1_EL2 __LR0_EL2(1)
-+#define ICH_LR2_EL2 __LR0_EL2(2)
-+#define ICH_LR3_EL2 __LR0_EL2(3)
-+#define ICH_LR4_EL2 __LR0_EL2(4)
-+#define ICH_LR5_EL2 __LR0_EL2(5)
-+#define ICH_LR6_EL2 __LR0_EL2(6)
-+#define ICH_LR7_EL2 __LR0_EL2(7)
-+#define ICH_LR8_EL2 __LR8_EL2(0)
-+#define ICH_LR9_EL2 __LR8_EL2(1)
-+#define ICH_LR10_EL2 __LR8_EL2(2)
-+#define ICH_LR11_EL2 __LR8_EL2(3)
-+#define ICH_LR12_EL2 __LR8_EL2(4)
-+#define ICH_LR13_EL2 __LR8_EL2(5)
-+#define ICH_LR14_EL2 __LR8_EL2(6)
-+#define ICH_LR15_EL2 __LR8_EL2(7)
-+
-+#define __AP0Rx_EL2(x) S3_4_C12_C8_ ## x
-+#define ICH_AP0R0_EL2 __AP0Rx_EL2(0)
-+#define ICH_AP0R1_EL2 __AP0Rx_EL2(1)
-+#define ICH_AP0R2_EL2 __AP0Rx_EL2(2)
-+#define ICH_AP0R3_EL2 __AP0Rx_EL2(3)
-+
-+#define __AP1Rx_EL2(x) S3_4_C12_C9_ ## x
-+#define ICH_AP1R0_EL2 __AP1Rx_EL2(0)
-+#define ICH_AP1R1_EL2 __AP1Rx_EL2(1)
-+#define ICH_AP1R2_EL2 __AP1Rx_EL2(2)
-+#define ICH_AP1R3_EL2 __AP1Rx_EL2(3)
-+
-+#ifndef __ASSEMBLY__
-+
-+#include <linux/stringify.h>
-+
-+static inline void gic_write_eoir(u64 irq)
-+{
-+ asm volatile("msr " __stringify(ICC_EOIR1_EL1) ", %0" : : "r" (irq));
-+ isb();
-+}
-+
-+#endif
-+
-+#endif
diff --git a/include/linux/of_address.h b/include/linux/of_address.h
index c13b878..33c0420 100644
--- a/include/linux/of_address.h
@@ -9005,7 +5937,7 @@ index dde3a4a..71e36d0 100644
#if defined(CONFIG_OF) && defined(CONFIG_PCI_MSI)
diff --git a/include/linux/pci.h b/include/linux/pci.h
-index 466bcd1..65fb1fc 100644
+index 61978a4..f582746 100644
--- a/include/linux/pci.h
+++ b/include/linux/pci.h
@@ -401,6 +401,8 @@ struct pci_host_bridge_window {
@@ -9027,7 +5959,7 @@ index 466bcd1..65fb1fc 100644
int pci_bus_insert_busn_res(struct pci_bus *b, int bus, int busmax);
int pci_bus_update_busn_res_end(struct pci_bus *b, int busmax);
void pci_bus_release_busn_res(struct pci_bus *b);
-@@ -1095,6 +1100,9 @@ int __must_check pci_bus_alloc_resource(struct pci_bus *bus,
+@@ -1097,6 +1102,9 @@ int __must_check pci_bus_alloc_resource(struct pci_bus *bus,
resource_size_t),
void *alignf_data);
@@ -9037,7 +5969,7 @@ index 466bcd1..65fb1fc 100644
static inline dma_addr_t pci_bus_address(struct pci_dev *pdev, int bar)
{
struct pci_bus_region region;
-@@ -1805,8 +1813,15 @@ static inline void pci_set_of_node(struct pci_dev *dev) { }
+@@ -1815,8 +1823,15 @@ static inline void pci_set_of_node(struct pci_dev *dev) { }
static inline void pci_release_of_node(struct pci_dev *dev) { }
static inline void pci_set_bus_of_node(struct pci_bus *bus) { }
static inline void pci_release_bus_of_node(struct pci_bus *bus) { }
diff --git a/kernel.spec b/kernel.spec
index acbeacf15..e82823133 100644
--- a/kernel.spec
+++ b/kernel.spec
@@ -8,7 +8,7 @@ Summary: The Linux kernel
# be 0.
%global released_kernel 0
-%global aarch64patches 0
+%global aarch64patches 1
# Sign modules on x86. Make sure the config files match this setting if more
# architectures are added.
@@ -2247,6 +2247,9 @@ fi
# ||----w |
# || ||
%changelog
+* Tue Aug 05 2014 Kyle McMartin <kyle@fedoraproject.org>
+- kernel-arm64.patch: fix up merge conflict and re-enable
+
* Tue Aug 05 2014 Josh Boyer <jwboyer@gmail.com> - 3.17.0-0.rc0.git1.1
- Linux v3.16-3652-gf19107379dbc
- Reenable debugging options.