summaryrefslogtreecommitdiffstats
diff options
context:
space:
mode:
authorPeter Robinson <pbrobinson@gmail.com>2015-03-26 01:14:45 +0000
committerPeter Robinson <pbrobinson@gmail.com>2015-03-26 01:14:45 +0000
commitb4512393acd627e61019975bcf6084a0ebd25439 (patch)
tree128ea7f7e9b29a46bff5c5be2e37af04c65f6e7d
parentb6d84528bca03e062e1108865cc293026c5a3298 (diff)
downloadkernel-b4512393acd627e61019975bcf6084a0ebd25439.tar.gz
kernel-b4512393acd627e61019975bcf6084a0ebd25439.tar.xz
kernel-b4512393acd627e61019975bcf6084a0ebd25439.zip
Add aarch64 patches to fix mustang usb, seattle eth, and console settings
-rw-r--r--amd-xgbe-phy-a0-Add-support-for-XGBE-PHY-on-A0.patch1847
-rw-r--r--arm64-avoid-needing-console-to-enable-serial-console.patch46
-rw-r--r--kernel.spec9
-rw-r--r--usb-make-xhci-platform-driver-use-64-bit-or-32-bit-D.patch44
4 files changed, 1946 insertions, 0 deletions
diff --git a/amd-xgbe-phy-a0-Add-support-for-XGBE-PHY-on-A0.patch b/amd-xgbe-phy-a0-Add-support-for-XGBE-PHY-on-A0.patch
new file mode 100644
index 000000000..a92564575
--- /dev/null
+++ b/amd-xgbe-phy-a0-Add-support-for-XGBE-PHY-on-A0.patch
@@ -0,0 +1,1847 @@
+From 12d65e98ceb4238b749feeb56523b90f19396820 Mon Sep 17 00:00:00 2001
+From: Tom Lendacky <thomas.lendacky@amd.com>
+Date: Tue, 17 Mar 2015 10:58:38 -0500
+Subject: [PATCH 2/4] amd-xgbe-phy-a0: Add support for XGBE PHY on A0
+
+Add XGBE phy driver support for A0 hardware.
+
+Signed-off-by: Tom Lendacky <thomas.lendacky@amd.com>
+---
+ drivers/net/phy/Makefile | 1 +
+ drivers/net/phy/amd-xgbe-phy-a0.c | 1814 +++++++++++++++++++++++++++++++++++++
+ 2 files changed, 1815 insertions(+)
+ create mode 100644 drivers/net/phy/amd-xgbe-phy-a0.c
+
+diff --git a/drivers/net/phy/Makefile b/drivers/net/phy/Makefile
+index 501ea76..92e7644 100644
+--- a/drivers/net/phy/Makefile
++++ b/drivers/net/phy/Makefile
+@@ -34,4 +34,5 @@ obj-$(CONFIG_MDIO_BUS_MUX_MMIOREG) += mdio-mux-mmioreg.o
+ obj-$(CONFIG_MDIO_SUN4I) += mdio-sun4i.o
+ obj-$(CONFIG_MDIO_MOXART) += mdio-moxart.o
+ obj-$(CONFIG_AMD_XGBE_PHY) += amd-xgbe-phy.o
++obj-$(CONFIG_AMD_XGBE_PHY) += amd-xgbe-phy-a0.o
+ obj-$(CONFIG_MDIO_BCM_UNIMAC) += mdio-bcm-unimac.o
+diff --git a/drivers/net/phy/amd-xgbe-phy-a0.c b/drivers/net/phy/amd-xgbe-phy-a0.c
+new file mode 100644
+index 0000000..c352d5c
+--- /dev/null
++++ b/drivers/net/phy/amd-xgbe-phy-a0.c
+@@ -0,0 +1,1814 @@
++/*
++ * AMD 10Gb Ethernet PHY driver
++ *
++ * This file is available to you under your choice of the following two
++ * licenses:
++ *
++ * License 1: GPLv2
++ *
++ * Copyright (c) 2014 Advanced Micro Devices, Inc.
++ *
++ * This file is free software; you may copy, redistribute and/or modify
++ * it under the terms of the GNU General Public License as published by
++ * the Free Software Foundation, either version 2 of the License, or (at
++ * your option) any later version.
++ *
++ * This file is distributed in the hope that it will be useful, but
++ * WITHOUT ANY WARRANTY; without even the implied warranty of
++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
++ * General Public License for more details.
++ *
++ * You should have received a copy of the GNU General Public License
++ * along with this program. If not, see <http://www.gnu.org/licenses/>.
++ *
++ *
++ * License 2: Modified BSD
++ *
++ * Copyright (c) 2014 Advanced Micro Devices, Inc.
++ * All rights reserved.
++ *
++ * Redistribution and use in source and binary forms, with or without
++ * modification, are permitted provided that the following conditions are met:
++ * * Redistributions of source code must retain the above copyright
++ * notice, this list of conditions and the following disclaimer.
++ * * Redistributions in binary form must reproduce the above copyright
++ * notice, this list of conditions and the following disclaimer in the
++ * documentation and/or other materials provided with the distribution.
++ * * Neither the name of Advanced Micro Devices, Inc. nor the
++ * names of its contributors may be used to endorse or promote products
++ * derived from this software without specific prior written permission.
++ *
++ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
++ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
++ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
++ * ARE DISCLAIMED. IN NO EVENT SHALL <COPYRIGHT HOLDER> BE LIABLE FOR ANY
++ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
++ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
++ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
++ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
++ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
++ * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
++ */
++
++#include <linux/kernel.h>
++#include <linux/device.h>
++#include <linux/platform_device.h>
++#include <linux/string.h>
++#include <linux/errno.h>
++#include <linux/unistd.h>
++#include <linux/slab.h>
++#include <linux/interrupt.h>
++#include <linux/init.h>
++#include <linux/delay.h>
++#include <linux/workqueue.h>
++#include <linux/netdevice.h>
++#include <linux/etherdevice.h>
++#include <linux/skbuff.h>
++#include <linux/mm.h>
++#include <linux/module.h>
++#include <linux/mii.h>
++#include <linux/ethtool.h>
++#include <linux/phy.h>
++#include <linux/mdio.h>
++#include <linux/io.h>
++#include <linux/of.h>
++#include <linux/of_platform.h>
++#include <linux/of_device.h>
++#include <linux/uaccess.h>
++#include <linux/bitops.h>
++#include <linux/property.h>
++#include <linux/acpi.h>
++#include <linux/irq.h>
++
++MODULE_AUTHOR("Tom Lendacky <thomas.lendacky@amd.com>");
++MODULE_LICENSE("Dual BSD/GPL");
++MODULE_VERSION("0.0.0-a");
++MODULE_DESCRIPTION("AMD 10GbE (amd-xgbe) PHY driver");
++
++#define XGBE_PHY_ID 0x7996ced0
++#define XGBE_PHY_MASK 0xfffffff0
++
++#define XGBE_PHY_SERDES_RETRY 32
++#define XGBE_PHY_CHANNEL_PROPERTY "amd,serdes-channel"
++#define XGBE_PHY_SPEEDSET_PROPERTY "amd,speed-set"
++#define XGBE_PHY_BLWC_PROPERTY "amd,serdes-blwc"
++#define XGBE_PHY_CDR_RATE_PROPERTY "amd,serdes-cdr-rate"
++#define XGBE_PHY_PQ_SKEW_PROPERTY "amd,serdes-pq-skew"
++#define XGBE_PHY_TX_AMP_PROPERTY "amd,serdes-tx-amp"
++
++#define XGBE_PHY_SPEEDS 3
++#define XGBE_PHY_SPEED_1000 0
++#define XGBE_PHY_SPEED_2500 1
++#define XGBE_PHY_SPEED_10000 2
++
++#define XGBE_AN_INT_CMPLT 0x01
++#define XGBE_AN_INC_LINK 0x02
++#define XGBE_AN_PG_RCV 0x04
++#define XGBE_AN_INT_MASK 0x07
++
++#define XNP_MCF_NULL_MESSAGE 0x001
++#define XNP_ACK_PROCESSED BIT(12)
++#define XNP_MP_FORMATTED BIT(13)
++#define XNP_NP_EXCHANGE BIT(15)
++
++#define XGBE_PHY_RATECHANGE_COUNT 500
++
++#define XGBE_PHY_KR_TRAINING_START 0x01
++#define XGBE_PHY_KR_TRAINING_ENABLE 0x02
++
++#define XGBE_PHY_FEC_ENABLE 0x01
++#define XGBE_PHY_FEC_FORWARD 0x02
++#define XGBE_PHY_FEC_MASK 0x03
++
++#ifndef MDIO_PMA_10GBR_PMD_CTRL
++#define MDIO_PMA_10GBR_PMD_CTRL 0x0096
++#endif
++
++#ifndef MDIO_PMA_10GBR_FEC_ABILITY
++#define MDIO_PMA_10GBR_FEC_ABILITY 0x00aa
++#endif
++
++#ifndef MDIO_PMA_10GBR_FEC_CTRL
++#define MDIO_PMA_10GBR_FEC_CTRL 0x00ab
++#endif
++
++#ifndef MDIO_AN_XNP
++#define MDIO_AN_XNP 0x0016
++#endif
++
++#ifndef MDIO_AN_LPX
++#define MDIO_AN_LPX 0x0019
++#endif
++
++#ifndef MDIO_AN_INTMASK
++#define MDIO_AN_INTMASK 0x8001
++#endif
++
++#ifndef MDIO_AN_INT
++#define MDIO_AN_INT 0x8002
++#endif
++
++#ifndef MDIO_AN_KR_CTRL
++#define MDIO_AN_KR_CTRL 0x8003
++#endif
++
++#ifndef MDIO_CTRL1_SPEED1G
++#define MDIO_CTRL1_SPEED1G (MDIO_CTRL1_SPEED10G & ~BMCR_SPEED100)
++#endif
++
++#ifndef MDIO_KR_CTRL_PDETECT
++#define MDIO_KR_CTRL_PDETECT 0x01
++#endif
++
++#define GET_BITS(_var, _index, _width) \
++ (((_var) >> (_index)) & ((0x1 << (_width)) - 1))
++
++#define SET_BITS(_var, _index, _width, _val) \
++do { \
++ (_var) &= ~(((0x1 << (_width)) - 1) << (_index)); \
++ (_var) |= (((_val) & ((0x1 << (_width)) - 1)) << (_index)); \
++} while (0)
++
++#define XCMU_IOREAD(_priv, _reg) \
++ ioread16((_priv)->cmu_regs + _reg)
++
++#define XCMU_IOWRITE(_priv, _reg, _val) \
++ iowrite16((_val), (_priv)->cmu_regs + _reg)
++
++#define XRXTX_IOREAD(_priv, _reg) \
++ ioread16((_priv)->rxtx_regs + _reg)
++
++#define XRXTX_IOREAD_BITS(_priv, _reg, _field) \
++ GET_BITS(XRXTX_IOREAD((_priv), _reg), \
++ _reg##_##_field##_INDEX, \
++ _reg##_##_field##_WIDTH)
++
++#define XRXTX_IOWRITE(_priv, _reg, _val) \
++ iowrite16((_val), (_priv)->rxtx_regs + _reg)
++
++#define XRXTX_IOWRITE_BITS(_priv, _reg, _field, _val) \
++do { \
++ u16 reg_val = XRXTX_IOREAD((_priv), _reg); \
++ SET_BITS(reg_val, \
++ _reg##_##_field##_INDEX, \
++ _reg##_##_field##_WIDTH, (_val)); \
++ XRXTX_IOWRITE((_priv), _reg, reg_val); \
++} while (0)
++
++/* SerDes CMU register offsets */
++#define CMU_REG15 0x003c
++#define CMU_REG16 0x0040
++
++/* SerDes CMU register entry bit positions and sizes */
++#define CMU_REG16_TX_RATE_CHANGE_BASE 15
++#define CMU_REG16_RX_RATE_CHANGE_BASE 14
++#define CMU_REG16_RATE_CHANGE_DECR 2
++
++/* SerDes RxTx register offsets */
++#define RXTX_REG2 0x0008
++#define RXTX_REG3 0x000c
++#define RXTX_REG5 0x0014
++#define RXTX_REG6 0x0018
++#define RXTX_REG20 0x0050
++#define RXTX_REG53 0x00d4
++#define RXTX_REG114 0x01c8
++#define RXTX_REG115 0x01cc
++#define RXTX_REG142 0x0238
++
++/* SerDes RxTx register entry bit positions and sizes */
++#define RXTX_REG2_RESETB_INDEX 15
++#define RXTX_REG2_RESETB_WIDTH 1
++#define RXTX_REG3_TX_DATA_RATE_INDEX 14
++#define RXTX_REG3_TX_DATA_RATE_WIDTH 2
++#define RXTX_REG3_TX_WORD_MODE_INDEX 11
++#define RXTX_REG3_TX_WORD_MODE_WIDTH 3
++#define RXTX_REG5_TXAMP_CNTL_INDEX 7
++#define RXTX_REG5_TXAMP_CNTL_WIDTH 4
++#define RXTX_REG6_RX_DATA_RATE_INDEX 9
++#define RXTX_REG6_RX_DATA_RATE_WIDTH 2
++#define RXTX_REG6_RX_WORD_MODE_INDEX 11
++#define RXTX_REG6_RX_WORD_MODE_WIDTH 3
++#define RXTX_REG20_BLWC_ENA_INDEX 2
++#define RXTX_REG20_BLWC_ENA_WIDTH 1
++#define RXTX_REG53_RX_PLLSELECT_INDEX 15
++#define RXTX_REG53_RX_PLLSELECT_WIDTH 1
++#define RXTX_REG53_TX_PLLSELECT_INDEX 14
++#define RXTX_REG53_TX_PLLSELECT_WIDTH 1
++#define RXTX_REG53_PI_SPD_SEL_CDR_INDEX 10
++#define RXTX_REG53_PI_SPD_SEL_CDR_WIDTH 4
++#define RXTX_REG114_PQ_REG_INDEX 9
++#define RXTX_REG114_PQ_REG_WIDTH 7
++#define RXTX_REG115_FORCE_LAT_CAL_START_INDEX 2
++#define RXTX_REG115_FORCE_LAT_CAL_START_WIDTH 1
++#define RXTX_REG115_FORCE_SUM_CAL_START_INDEX 1
++#define RXTX_REG115_FORCE_SUM_CAL_START_WIDTH 1
++#define RXTX_REG142_SUM_CALIB_DONE_INDEX 15
++#define RXTX_REG142_SUM_CALIB_DONE_WIDTH 1
++#define RXTX_REG142_SUM_CALIB_ERR_INDEX 14
++#define RXTX_REG142_SUM_CALIB_ERR_WIDTH 1
++#define RXTX_REG142_LAT_CALIB_DONE_INDEX 11
++#define RXTX_REG142_LAT_CALIB_DONE_WIDTH 1
++
++#define RXTX_FULL_RATE 0x0
++#define RXTX_HALF_RATE 0x1
++#define RXTX_FIFTH_RATE 0x3
++#define RXTX_66BIT_WORD 0x7
++#define RXTX_10BIT_WORD 0x1
++#define RXTX_10G_BLWC 0x0
++#define RXTX_1G_BLWC 0x1
++#define RXTX_10G_TX_AMP 0xa
++#define RXTX_1G_TX_AMP 0xf
++#define RXTX_10G_CDR 0x7
++#define RXTX_1G_CDR 0x2
++#define RXTX_10G_PLL 0x1
++#define RXTX_1G_PLL 0x0
++#define RXTX_10G_PQ 0x1e
++#define RXTX_1G_PQ 0xa
++
++DEFINE_SPINLOCK(cmu_lock);
++
++static const u32 amd_xgbe_phy_serdes_blwc[] = {
++ RXTX_1G_BLWC,
++ RXTX_1G_BLWC,
++ RXTX_10G_BLWC,
++};
++
++static const u32 amd_xgbe_phy_serdes_cdr_rate[] = {
++ RXTX_1G_CDR,
++ RXTX_1G_CDR,
++ RXTX_10G_CDR,
++};
++
++static const u32 amd_xgbe_phy_serdes_pq_skew[] = {
++ RXTX_1G_PQ,
++ RXTX_1G_PQ,
++ RXTX_10G_PQ,
++};
++
++static const u32 amd_xgbe_phy_serdes_tx_amp[] = {
++ RXTX_1G_TX_AMP,
++ RXTX_1G_TX_AMP,
++ RXTX_10G_TX_AMP,
++};
++
++enum amd_xgbe_phy_an {
++ AMD_XGBE_AN_READY = 0,
++ AMD_XGBE_AN_PAGE_RECEIVED,
++ AMD_XGBE_AN_INCOMPAT_LINK,
++ AMD_XGBE_AN_COMPLETE,
++ AMD_XGBE_AN_NO_LINK,
++ AMD_XGBE_AN_ERROR,
++};
++
++enum amd_xgbe_phy_rx {
++ AMD_XGBE_RX_BPA = 0,
++ AMD_XGBE_RX_XNP,
++ AMD_XGBE_RX_COMPLETE,
++ AMD_XGBE_RX_ERROR,
++};
++
++enum amd_xgbe_phy_mode {
++ AMD_XGBE_MODE_KR,
++ AMD_XGBE_MODE_KX,
++};
++
++enum amd_xgbe_phy_speedset {
++ AMD_XGBE_PHY_SPEEDSET_1000_10000 = 0,
++ AMD_XGBE_PHY_SPEEDSET_2500_10000,
++};
++
++struct amd_xgbe_phy_priv {
++ struct platform_device *pdev;
++ struct acpi_device *adev;
++ struct device *dev;
++
++ struct phy_device *phydev;
++
++ /* SerDes related mmio resources */
++ struct resource *rxtx_res;
++ struct resource *cmu_res;
++
++ /* SerDes related mmio registers */
++ void __iomem *rxtx_regs; /* SerDes Rx/Tx CSRs */
++ void __iomem *cmu_regs; /* SerDes CMU CSRs */
++
++ int an_irq;
++ char an_irq_name[IFNAMSIZ + 32];
++ struct work_struct an_irq_work;
++ unsigned int an_irq_allocated;
++
++ unsigned int serdes_channel;
++ unsigned int speed_set;
++
++ /* Maintain link status for re-starting auto-negotiation */
++ unsigned int link;
++
++ /* SerDes UEFI configurable settings.
++ * Switching between modes/speeds requires new values for some
++ * SerDes settings. The values can be supplied as device
++ * properties in array format. The first array entry is for
++ * 1GbE, second for 2.5GbE and third for 10GbE
++ */
++ u32 serdes_blwc[XGBE_PHY_SPEEDS];
++ u32 serdes_cdr_rate[XGBE_PHY_SPEEDS];
++ u32 serdes_pq_skew[XGBE_PHY_SPEEDS];
++ u32 serdes_tx_amp[XGBE_PHY_SPEEDS];
++
++ /* Auto-negotiation state machine support */
++ struct mutex an_mutex;
++ enum amd_xgbe_phy_an an_result;
++ enum amd_xgbe_phy_an an_state;
++ enum amd_xgbe_phy_rx kr_state;
++ enum amd_xgbe_phy_rx kx_state;
++ struct work_struct an_work;
++ struct workqueue_struct *an_workqueue;
++ unsigned int an_supported;
++ unsigned int parallel_detect;
++ unsigned int fec_ability;
++
++ unsigned int lpm_ctrl; /* CTRL1 for resume */
++};
++
++static int amd_xgbe_an_disable_kr_training(struct phy_device *phydev)
++{
++ int ret;
++
++ ret = phy_read_mmd(phydev, MDIO_MMD_PMAPMD, MDIO_PMA_10GBR_PMD_CTRL);
++ if (ret < 0)
++ return ret;
++
++ ret &= ~XGBE_PHY_KR_TRAINING_ENABLE;
++ phy_write_mmd(phydev, MDIO_MMD_PMAPMD, MDIO_PMA_10GBR_PMD_CTRL, ret);
++
++ return 0;
++}
++
++static int amd_xgbe_phy_pcs_power_cycle(struct phy_device *phydev)
++{
++ int ret;
++
++ ret = phy_read_mmd(phydev, MDIO_MMD_PCS, MDIO_CTRL1);
++ if (ret < 0)
++ return ret;
++
++ ret |= MDIO_CTRL1_LPOWER;
++ phy_write_mmd(phydev, MDIO_MMD_PCS, MDIO_CTRL1, ret);
++
++ usleep_range(75, 100);
++
++ ret &= ~MDIO_CTRL1_LPOWER;
++ phy_write_mmd(phydev, MDIO_MMD_PCS, MDIO_CTRL1, ret);
++
++ return 0;
++}
++
++static void amd_xgbe_phy_serdes_start_ratechange(struct phy_device *phydev)
++{
++ struct amd_xgbe_phy_priv *priv = phydev->priv;
++ u16 val, mask;
++
++ /* Assert Rx and Tx ratechange in CMU_reg16 */
++ val = XCMU_IOREAD(priv, CMU_REG16);
++
++ mask = (1 << (CMU_REG16_TX_RATE_CHANGE_BASE -
++ (priv->serdes_channel * CMU_REG16_RATE_CHANGE_DECR))) |
++ (1 << (CMU_REG16_RX_RATE_CHANGE_BASE -
++ (priv->serdes_channel * CMU_REG16_RATE_CHANGE_DECR)));
++ val |= mask;
++
++ XCMU_IOWRITE(priv, CMU_REG16, val);
++}
++
++static void amd_xgbe_phy_serdes_complete_ratechange(struct phy_device *phydev)
++{
++ struct amd_xgbe_phy_priv *priv = phydev->priv;
++ u16 val, mask;
++ unsigned int wait;
++
++ /* Release Rx and Tx ratechange for proper channel in CMU_reg16 */
++ val = XCMU_IOREAD(priv, CMU_REG16);
++
++ mask = (1 << (CMU_REG16_TX_RATE_CHANGE_BASE -
++ (priv->serdes_channel * CMU_REG16_RATE_CHANGE_DECR))) |
++ (1 << (CMU_REG16_RX_RATE_CHANGE_BASE -
++ (priv->serdes_channel * CMU_REG16_RATE_CHANGE_DECR)));
++ val &= ~mask;
++
++ XCMU_IOWRITE(priv, CMU_REG16, val);
++
++ /* Wait for Rx and Tx ready in CMU_reg15 */
++ mask = (1 << priv->serdes_channel) |
++ (1 << (priv->serdes_channel + 8));
++ wait = XGBE_PHY_RATECHANGE_COUNT;
++ while (wait--) {
++ udelay(50);
++
++ val = XCMU_IOREAD(priv, CMU_REG15);
++ if ((val & mask) == mask)
++ return;
++ }
++
++ netdev_dbg(phydev->attached_dev, "SerDes rx/tx not ready (%#hx)\n",
++ val);
++}
++
++static int amd_xgbe_phy_xgmii_mode(struct phy_device *phydev)
++{
++ struct amd_xgbe_phy_priv *priv = phydev->priv;
++ int ret;
++
++ /* Disable KR training */
++ ret = amd_xgbe_an_disable_kr_training(phydev);
++ if (ret < 0)
++ return ret;
++
++ /* Set PCS to KR/10G speed */
++ ret = phy_read_mmd(phydev, MDIO_MMD_PCS, MDIO_CTRL2);
++ if (ret < 0)
++ return ret;
++
++ ret &= ~MDIO_PCS_CTRL2_TYPE;
++ ret |= MDIO_PCS_CTRL2_10GBR;
++ phy_write_mmd(phydev, MDIO_MMD_PCS, MDIO_CTRL2, ret);
++
++ ret = phy_read_mmd(phydev, MDIO_MMD_PCS, MDIO_CTRL1);
++ if (ret < 0)
++ return ret;
++
++ ret &= ~MDIO_CTRL1_SPEEDSEL;
++ ret |= MDIO_CTRL1_SPEED10G;
++ phy_write_mmd(phydev, MDIO_MMD_PCS, MDIO_CTRL1, ret);
++
++ ret = amd_xgbe_phy_pcs_power_cycle(phydev);
++ if (ret < 0)
++ return ret;
++
++ /* Set SerDes to 10G speed */
++ spin_lock(&cmu_lock);
++
++ amd_xgbe_phy_serdes_start_ratechange(phydev);
++
++ XRXTX_IOWRITE_BITS(priv, RXTX_REG3, TX_DATA_RATE, RXTX_FULL_RATE);
++ XRXTX_IOWRITE_BITS(priv, RXTX_REG3, TX_WORD_MODE, RXTX_66BIT_WORD);
++
++ XRXTX_IOWRITE_BITS(priv, RXTX_REG5, TXAMP_CNTL,
++ priv->serdes_tx_amp[XGBE_PHY_SPEED_10000]);
++
++ XRXTX_IOWRITE_BITS(priv, RXTX_REG6, RX_DATA_RATE, RXTX_FULL_RATE);
++ XRXTX_IOWRITE_BITS(priv, RXTX_REG6, RX_WORD_MODE, RXTX_66BIT_WORD);
++
++ XRXTX_IOWRITE_BITS(priv, RXTX_REG20, BLWC_ENA,
++ priv->serdes_blwc[XGBE_PHY_SPEED_10000]);
++
++ XRXTX_IOWRITE_BITS(priv, RXTX_REG53, RX_PLLSELECT, RXTX_10G_PLL);
++ XRXTX_IOWRITE_BITS(priv, RXTX_REG53, TX_PLLSELECT, RXTX_10G_PLL);
++ XRXTX_IOWRITE_BITS(priv, RXTX_REG53, PI_SPD_SEL_CDR,
++ priv->serdes_cdr_rate[XGBE_PHY_SPEED_10000]);
++
++ XRXTX_IOWRITE_BITS(priv, RXTX_REG114, PQ_REG,
++ priv->serdes_pq_skew[XGBE_PHY_SPEED_10000]);
++
++ amd_xgbe_phy_serdes_complete_ratechange(phydev);
++
++ spin_unlock(&cmu_lock);
++
++ return 0;
++}
++
++static int amd_xgbe_phy_gmii_2500_mode(struct phy_device *phydev)
++{
++ struct amd_xgbe_phy_priv *priv = phydev->priv;
++ int ret;
++
++ /* Disable KR training */
++ ret = amd_xgbe_an_disable_kr_training(phydev);
++ if (ret < 0)
++ return ret;
++
++ /* Set PCS to KX/1G speed */
++ ret = phy_read_mmd(phydev, MDIO_MMD_PCS, MDIO_CTRL2);
++ if (ret < 0)
++ return ret;
++
++ ret &= ~MDIO_PCS_CTRL2_TYPE;
++ ret |= MDIO_PCS_CTRL2_10GBX;
++ phy_write_mmd(phydev, MDIO_MMD_PCS, MDIO_CTRL2, ret);
++
++ ret = phy_read_mmd(phydev, MDIO_MMD_PCS, MDIO_CTRL1);
++ if (ret < 0)
++ return ret;
++
++ ret &= ~MDIO_CTRL1_SPEEDSEL;
++ ret |= MDIO_CTRL1_SPEED1G;
++ phy_write_mmd(phydev, MDIO_MMD_PCS, MDIO_CTRL1, ret);
++
++ ret = amd_xgbe_phy_pcs_power_cycle(phydev);
++ if (ret < 0)
++ return ret;
++
++ /* Set SerDes to 2.5G speed */
++ spin_lock(&cmu_lock);
++
++ amd_xgbe_phy_serdes_start_ratechange(phydev);
++
++ XRXTX_IOWRITE_BITS(priv, RXTX_REG3, TX_DATA_RATE, RXTX_HALF_RATE);
++ XRXTX_IOWRITE_BITS(priv, RXTX_REG3, TX_WORD_MODE, RXTX_10BIT_WORD);
++
++ XRXTX_IOWRITE_BITS(priv, RXTX_REG5, TXAMP_CNTL,
++ priv->serdes_tx_amp[XGBE_PHY_SPEED_2500]);
++
++ XRXTX_IOWRITE_BITS(priv, RXTX_REG6, RX_DATA_RATE, RXTX_HALF_RATE);
++ XRXTX_IOWRITE_BITS(priv, RXTX_REG6, RX_WORD_MODE, RXTX_10BIT_WORD);
++
++ XRXTX_IOWRITE_BITS(priv, RXTX_REG20, BLWC_ENA,
++ priv->serdes_blwc[XGBE_PHY_SPEED_2500]);
++
++ XRXTX_IOWRITE_BITS(priv, RXTX_REG53, RX_PLLSELECT, RXTX_1G_PLL);
++ XRXTX_IOWRITE_BITS(priv, RXTX_REG53, TX_PLLSELECT, RXTX_1G_PLL);
++ XRXTX_IOWRITE_BITS(priv, RXTX_REG53, PI_SPD_SEL_CDR,
++ priv->serdes_cdr_rate[XGBE_PHY_SPEED_2500]);
++
++ XRXTX_IOWRITE_BITS(priv, RXTX_REG114, PQ_REG,
++ priv->serdes_pq_skew[XGBE_PHY_SPEED_2500]);
++
++ amd_xgbe_phy_serdes_complete_ratechange(phydev);
++
++ spin_unlock(&cmu_lock);
++
++ return 0;
++}
++
++static int amd_xgbe_phy_gmii_mode(struct phy_device *phydev)
++{
++ struct amd_xgbe_phy_priv *priv = phydev->priv;
++ int ret;
++
++ /* Disable KR training */
++ ret = amd_xgbe_an_disable_kr_training(phydev);
++ if (ret < 0)
++ return ret;
++
++ /* Set PCS to KX/1G speed */
++ ret = phy_read_mmd(phydev, MDIO_MMD_PCS, MDIO_CTRL2);
++ if (ret < 0)
++ return ret;
++
++ ret &= ~MDIO_PCS_CTRL2_TYPE;
++ ret |= MDIO_PCS_CTRL2_10GBX;
++ phy_write_mmd(phydev, MDIO_MMD_PCS, MDIO_CTRL2, ret);
++
++ ret = phy_read_mmd(phydev, MDIO_MMD_PCS, MDIO_CTRL1);
++ if (ret < 0)
++ return ret;
++
++ ret &= ~MDIO_CTRL1_SPEEDSEL;
++ ret |= MDIO_CTRL1_SPEED1G;
++ phy_write_mmd(phydev, MDIO_MMD_PCS, MDIO_CTRL1, ret);
++
++ ret = amd_xgbe_phy_pcs_power_cycle(phydev);
++ if (ret < 0)
++ return ret;
++
++ /* Set SerDes to 1G speed */
++ spin_lock(&cmu_lock);
++
++ amd_xgbe_phy_serdes_start_ratechange(phydev);
++
++ XRXTX_IOWRITE_BITS(priv, RXTX_REG3, TX_DATA_RATE, RXTX_FIFTH_RATE);
++ XRXTX_IOWRITE_BITS(priv, RXTX_REG3, TX_WORD_MODE, RXTX_10BIT_WORD);
++
++ XRXTX_IOWRITE_BITS(priv, RXTX_REG5, TXAMP_CNTL,
++ priv->serdes_tx_amp[XGBE_PHY_SPEED_1000]);
++
++ XRXTX_IOWRITE_BITS(priv, RXTX_REG6, RX_DATA_RATE, RXTX_FIFTH_RATE);
++ XRXTX_IOWRITE_BITS(priv, RXTX_REG6, RX_WORD_MODE, RXTX_10BIT_WORD);
++
++ XRXTX_IOWRITE_BITS(priv, RXTX_REG20, BLWC_ENA,
++ priv->serdes_blwc[XGBE_PHY_SPEED_1000]);
++
++ XRXTX_IOWRITE_BITS(priv, RXTX_REG53, RX_PLLSELECT, RXTX_1G_PLL);
++ XRXTX_IOWRITE_BITS(priv, RXTX_REG53, TX_PLLSELECT, RXTX_1G_PLL);
++ XRXTX_IOWRITE_BITS(priv, RXTX_REG53, PI_SPD_SEL_CDR,
++ priv->serdes_cdr_rate[XGBE_PHY_SPEED_1000]);
++
++ XRXTX_IOWRITE_BITS(priv, RXTX_REG114, PQ_REG,
++ priv->serdes_pq_skew[XGBE_PHY_SPEED_1000]);
++
++ amd_xgbe_phy_serdes_complete_ratechange(phydev);
++
++ spin_unlock(&cmu_lock);
++
++ return 0;
++}
++
++static int amd_xgbe_phy_cur_mode(struct phy_device *phydev,
++ enum amd_xgbe_phy_mode *mode)
++{
++ int ret;
++
++ ret = phy_read_mmd(phydev, MDIO_MMD_PCS, MDIO_CTRL2);
++ if (ret < 0)
++ return ret;
++
++ if ((ret & MDIO_PCS_CTRL2_TYPE) == MDIO_PCS_CTRL2_10GBR)
++ *mode = AMD_XGBE_MODE_KR;
++ else
++ *mode = AMD_XGBE_MODE_KX;
++
++ return 0;
++}
++
++static bool amd_xgbe_phy_in_kr_mode(struct phy_device *phydev)
++{
++ enum amd_xgbe_phy_mode mode;
++
++ if (amd_xgbe_phy_cur_mode(phydev, &mode))
++ return false;
++
++ return (mode == AMD_XGBE_MODE_KR);
++}
++
++static int amd_xgbe_phy_switch_mode(struct phy_device *phydev)
++{
++ struct amd_xgbe_phy_priv *priv = phydev->priv;
++ int ret;
++
++ /* If we are in KR switch to KX, and vice-versa */
++ if (amd_xgbe_phy_in_kr_mode(phydev)) {
++ if (priv->speed_set == AMD_XGBE_PHY_SPEEDSET_1000_10000)
++ ret = amd_xgbe_phy_gmii_mode(phydev);
++ else
++ ret = amd_xgbe_phy_gmii_2500_mode(phydev);
++ } else {
++ ret = amd_xgbe_phy_xgmii_mode(phydev);
++ }
++
++ return ret;
++}
++
++static int amd_xgbe_phy_set_mode(struct phy_device *phydev,
++ enum amd_xgbe_phy_mode mode)
++{
++ enum amd_xgbe_phy_mode cur_mode;
++ int ret;
++
++ ret = amd_xgbe_phy_cur_mode(phydev, &cur_mode);
++ if (ret)
++ return ret;
++
++ if (mode != cur_mode)
++ ret = amd_xgbe_phy_switch_mode(phydev);
++
++ return ret;
++}
++
++static int amd_xgbe_phy_set_an(struct phy_device *phydev, bool enable,
++ bool restart)
++{
++ int ret;
++
++ ret = phy_read_mmd(phydev, MDIO_MMD_AN, MDIO_CTRL1);
++ if (ret < 0)
++ return ret;
++
++ ret &= ~MDIO_AN_CTRL1_ENABLE;
++
++ if (enable)
++ ret |= MDIO_AN_CTRL1_ENABLE;
++
++ if (restart)
++ ret |= MDIO_AN_CTRL1_RESTART;
++
++ phy_write_mmd(phydev, MDIO_MMD_AN, MDIO_CTRL1, ret);
++
++ return 0;
++}
++
++static int amd_xgbe_phy_restart_an(struct phy_device *phydev)
++{
++ return amd_xgbe_phy_set_an(phydev, true, true);
++}
++
++static int amd_xgbe_phy_disable_an(struct phy_device *phydev)
++{
++ return amd_xgbe_phy_set_an(phydev, false, false);
++}
++
++static enum amd_xgbe_phy_an amd_xgbe_an_tx_training(struct phy_device *phydev,
++ enum amd_xgbe_phy_rx *state)
++{
++ struct amd_xgbe_phy_priv *priv = phydev->priv;
++ int ad_reg, lp_reg, ret;
++
++ *state = AMD_XGBE_RX_COMPLETE;
++
++ /* If we're not in KR mode then we're done */
++ if (!amd_xgbe_phy_in_kr_mode(phydev))
++ return AMD_XGBE_AN_PAGE_RECEIVED;
++
++ /* Enable/Disable FEC */
++ ad_reg = phy_read_mmd(phydev, MDIO_MMD_AN, MDIO_AN_ADVERTISE + 2);
++ if (ad_reg < 0)
++ return AMD_XGBE_AN_ERROR;
++
++ lp_reg = phy_read_mmd(phydev, MDIO_MMD_AN, MDIO_AN_LPA + 2);
++ if (lp_reg < 0)
++ return AMD_XGBE_AN_ERROR;
++
++ ret = phy_read_mmd(phydev, MDIO_MMD_PMAPMD, MDIO_PMA_10GBR_FEC_CTRL);
++ if (ret < 0)
++ return AMD_XGBE_AN_ERROR;
++
++ ret &= ~XGBE_PHY_FEC_MASK;
++ if ((ad_reg & 0xc000) && (lp_reg & 0xc000))
++ ret |= priv->fec_ability;
++
++ phy_write_mmd(phydev, MDIO_MMD_PMAPMD, MDIO_PMA_10GBR_FEC_CTRL, ret);
++
++ /* Start KR training */
++ ret = phy_read_mmd(phydev, MDIO_MMD_PMAPMD, MDIO_PMA_10GBR_PMD_CTRL);
++ if (ret < 0)
++ return AMD_XGBE_AN_ERROR;
++
++ if (ret & XGBE_PHY_KR_TRAINING_ENABLE) {
++ ret |= XGBE_PHY_KR_TRAINING_START;
++ phy_write_mmd(phydev, MDIO_MMD_PMAPMD, MDIO_PMA_10GBR_PMD_CTRL,
++ ret);
++ }
++
++ return AMD_XGBE_AN_PAGE_RECEIVED;
++}
++
++static enum amd_xgbe_phy_an amd_xgbe_an_tx_xnp(struct phy_device *phydev,
++ enum amd_xgbe_phy_rx *state)
++{
++ u16 msg;
++
++ *state = AMD_XGBE_RX_XNP;
++
++ msg = XNP_MCF_NULL_MESSAGE;
++ msg |= XNP_MP_FORMATTED;
++
++ phy_write_mmd(phydev, MDIO_MMD_AN, MDIO_AN_XNP + 2, 0);
++ phy_write_mmd(phydev, MDIO_MMD_AN, MDIO_AN_XNP + 1, 0);
++ phy_write_mmd(phydev, MDIO_MMD_AN, MDIO_AN_XNP, msg);
++
++ return AMD_XGBE_AN_PAGE_RECEIVED;
++}
++
++static enum amd_xgbe_phy_an amd_xgbe_an_rx_bpa(struct phy_device *phydev,
++ enum amd_xgbe_phy_rx *state)
++{
++ unsigned int link_support;
++ int ret, ad_reg, lp_reg;
++
++ /* Read Base Ability register 2 first */
++ ret = phy_read_mmd(phydev, MDIO_MMD_AN, MDIO_AN_LPA + 1);
++ if (ret < 0)
++ return AMD_XGBE_AN_ERROR;
++
++ /* Check for a supported mode, otherwise restart in a different one */
++ link_support = amd_xgbe_phy_in_kr_mode(phydev) ? 0x80 : 0x20;
++ if (!(ret & link_support))
++ return AMD_XGBE_AN_INCOMPAT_LINK;
++
++ /* Check Extended Next Page support */
++ ad_reg = phy_read_mmd(phydev, MDIO_MMD_AN, MDIO_AN_ADVERTISE);
++ if (ad_reg < 0)
++ return AMD_XGBE_AN_ERROR;
++
++ lp_reg = phy_read_mmd(phydev, MDIO_MMD_AN, MDIO_AN_LPA);
++ if (lp_reg < 0)
++ return AMD_XGBE_AN_ERROR;
++
++ return ((ad_reg & XNP_NP_EXCHANGE) || (lp_reg & XNP_NP_EXCHANGE)) ?
++ amd_xgbe_an_tx_xnp(phydev, state) :
++ amd_xgbe_an_tx_training(phydev, state);
++}
++
++static enum amd_xgbe_phy_an amd_xgbe_an_rx_xnp(struct phy_device *phydev,
++ enum amd_xgbe_phy_rx *state)
++{
++ int ad_reg, lp_reg;
++
++ /* Check Extended Next Page support */
++ ad_reg = phy_read_mmd(phydev, MDIO_MMD_AN, MDIO_AN_XNP);
++ if (ad_reg < 0)
++ return AMD_XGBE_AN_ERROR;
++
++ lp_reg = phy_read_mmd(phydev, MDIO_MMD_AN, MDIO_AN_LPX);
++ if (lp_reg < 0)
++ return AMD_XGBE_AN_ERROR;
++
++ return ((ad_reg & XNP_NP_EXCHANGE) || (lp_reg & XNP_NP_EXCHANGE)) ?
++ amd_xgbe_an_tx_xnp(phydev, state) :
++ amd_xgbe_an_tx_training(phydev, state);
++}
++
++static enum amd_xgbe_phy_an amd_xgbe_an_page_received(struct phy_device *phydev)
++{
++ struct amd_xgbe_phy_priv *priv = phydev->priv;
++ enum amd_xgbe_phy_rx *state;
++ int ret;
++
++ state = amd_xgbe_phy_in_kr_mode(phydev) ? &priv->kr_state
++ : &priv->kx_state;
++
++ switch (*state) {
++ case AMD_XGBE_RX_BPA:
++ ret = amd_xgbe_an_rx_bpa(phydev, state);
++ break;
++
++ case AMD_XGBE_RX_XNP:
++ ret = amd_xgbe_an_rx_xnp(phydev, state);
++ break;
++
++ default:
++ ret = AMD_XGBE_AN_ERROR;
++ }
++
++ return ret;
++}
++
++static enum amd_xgbe_phy_an amd_xgbe_an_incompat_link(struct phy_device *phydev)
++{
++ struct amd_xgbe_phy_priv *priv = phydev->priv;
++ int ret;
++
++ /* Be sure we aren't looping trying to negotiate */
++ if (amd_xgbe_phy_in_kr_mode(phydev)) {
++ priv->kr_state = AMD_XGBE_RX_ERROR;
++
++ if (!(phydev->supported & SUPPORTED_1000baseKX_Full) &&
++ !(phydev->supported & SUPPORTED_2500baseX_Full))
++ return AMD_XGBE_AN_NO_LINK;
++
++ if (priv->kx_state != AMD_XGBE_RX_BPA)
++ return AMD_XGBE_AN_NO_LINK;
++ } else {
++ priv->kx_state = AMD_XGBE_RX_ERROR;
++
++ if (!(phydev->supported & SUPPORTED_10000baseKR_Full))
++ return AMD_XGBE_AN_NO_LINK;
++
++ if (priv->kr_state != AMD_XGBE_RX_BPA)
++ return AMD_XGBE_AN_NO_LINK;
++ }
++
++ ret = amd_xgbe_phy_disable_an(phydev);
++ if (ret)
++ return AMD_XGBE_AN_ERROR;
++
++ ret = amd_xgbe_phy_switch_mode(phydev);
++ if (ret)
++ return AMD_XGBE_AN_ERROR;
++
++ ret = amd_xgbe_phy_restart_an(phydev);
++ if (ret)
++ return AMD_XGBE_AN_ERROR;
++
++ return AMD_XGBE_AN_INCOMPAT_LINK;
++}
++
++static irqreturn_t amd_xgbe_an_isr(int irq, void *data)
++{
++ struct amd_xgbe_phy_priv *priv = (struct amd_xgbe_phy_priv *)data;
++
++ /* Interrupt reason must be read and cleared outside of IRQ context */
++ disable_irq_nosync(priv->an_irq);
++
++ queue_work(priv->an_workqueue, &priv->an_irq_work);
++
++ return IRQ_HANDLED;
++}
++
++static void amd_xgbe_an_irq_work(struct work_struct *work)
++{
++ struct amd_xgbe_phy_priv *priv = container_of(work,
++ struct amd_xgbe_phy_priv,
++ an_irq_work);
++
++ /* Avoid a race between enabling the IRQ and exiting the work by
++ * waiting for the work to finish and then queueing it
++ */
++ flush_work(&priv->an_work);
++ queue_work(priv->an_workqueue, &priv->an_work);
++}
++
++static void amd_xgbe_an_state_machine(struct work_struct *work)
++{
++ struct amd_xgbe_phy_priv *priv = container_of(work,
++ struct amd_xgbe_phy_priv,
++ an_work);
++ struct phy_device *phydev = priv->phydev;
++ enum amd_xgbe_phy_an cur_state = priv->an_state;
++ int int_reg, int_mask;
++
++ mutex_lock(&priv->an_mutex);
++
++ /* Read the interrupt */
++ int_reg = phy_read_mmd(phydev, MDIO_MMD_AN, MDIO_AN_INT);
++ if (!int_reg)
++ goto out;
++
++next_int:
++ if (int_reg < 0) {
++ priv->an_state = AMD_XGBE_AN_ERROR;
++ int_mask = XGBE_AN_INT_MASK;
++ } else if (int_reg & XGBE_AN_PG_RCV) {
++ priv->an_state = AMD_XGBE_AN_PAGE_RECEIVED;
++ int_mask = XGBE_AN_PG_RCV;
++ } else if (int_reg & XGBE_AN_INC_LINK) {
++ priv->an_state = AMD_XGBE_AN_INCOMPAT_LINK;
++ int_mask = XGBE_AN_INC_LINK;
++ } else if (int_reg & XGBE_AN_INT_CMPLT) {
++ priv->an_state = AMD_XGBE_AN_COMPLETE;
++ int_mask = XGBE_AN_INT_CMPLT;
++ } else {
++ priv->an_state = AMD_XGBE_AN_ERROR;
++ int_mask = 0;
++ }
++
++ /* Clear the interrupt to be processed */
++ int_reg &= ~int_mask;
++ phy_write_mmd(phydev, MDIO_MMD_AN, MDIO_AN_INT, int_reg);
++
++ priv->an_result = priv->an_state;
++
++again:
++ cur_state = priv->an_state;
++
++ switch (priv->an_state) {
++ case AMD_XGBE_AN_READY:
++ priv->an_supported = 0;
++ break;
++
++ case AMD_XGBE_AN_PAGE_RECEIVED:
++ priv->an_state = amd_xgbe_an_page_received(phydev);
++ priv->an_supported++;
++ break;
++
++ case AMD_XGBE_AN_INCOMPAT_LINK:
++ priv->an_supported = 0;
++ priv->parallel_detect = 0;
++ priv->an_state = amd_xgbe_an_incompat_link(phydev);
++ break;
++
++ case AMD_XGBE_AN_COMPLETE:
++ priv->parallel_detect = priv->an_supported ? 0 : 1;
++ netdev_dbg(phydev->attached_dev, "%s successful\n",
++ priv->an_supported ? "Auto negotiation"
++ : "Parallel detection");
++ break;
++
++ case AMD_XGBE_AN_NO_LINK:
++ break;
++
++ default:
++ priv->an_state = AMD_XGBE_AN_ERROR;
++ }
++
++ if (priv->an_state == AMD_XGBE_AN_NO_LINK) {
++ /* Disable auto-negotiation for now - it will be
++ * re-enabled once a link is established
++ */
++ amd_xgbe_phy_disable_an(phydev);
++
++ int_reg = 0;
++ phy_write_mmd(phydev, MDIO_MMD_AN, MDIO_AN_INT, 0);
++ } else if (priv->an_state == AMD_XGBE_AN_ERROR) {
++ netdev_err(phydev->attached_dev,
++ "error during auto-negotiation, state=%u\n",
++ cur_state);
++
++ int_reg = 0;
++ phy_write_mmd(phydev, MDIO_MMD_AN, MDIO_AN_INT, 0);
++ }
++
++ if (priv->an_state >= AMD_XGBE_AN_COMPLETE) {
++ priv->an_result = priv->an_state;
++ priv->an_state = AMD_XGBE_AN_READY;
++ priv->kr_state = AMD_XGBE_RX_BPA;
++ priv->kx_state = AMD_XGBE_RX_BPA;
++ }
++
++ if (cur_state != priv->an_state)
++ goto again;
++
++ if (int_reg)
++ goto next_int;
++
++out:
++ enable_irq(priv->an_irq);
++
++ mutex_unlock(&priv->an_mutex);
++}
++
++static int amd_xgbe_an_init(struct phy_device *phydev)
++{
++ int ret;
++
++ /* Set up Advertisement register 3 first */
++ ret = phy_read_mmd(phydev, MDIO_MMD_AN, MDIO_AN_ADVERTISE + 2);
++ if (ret < 0)
++ return ret;
++
++ if (phydev->supported & SUPPORTED_10000baseR_FEC)
++ ret |= 0xc000;
++ else
++ ret &= ~0xc000;
++
++ phy_write_mmd(phydev, MDIO_MMD_AN, MDIO_AN_ADVERTISE + 2, ret);
++
++ /* Set up Advertisement register 2 next */
++ ret = phy_read_mmd(phydev, MDIO_MMD_AN, MDIO_AN_ADVERTISE + 1);
++ if (ret < 0)
++ return ret;
++
++ if (phydev->supported & SUPPORTED_10000baseKR_Full)
++ ret |= 0x80;
++ else
++ ret &= ~0x80;
++
++ if ((phydev->supported & SUPPORTED_1000baseKX_Full) ||
++ (phydev->supported & SUPPORTED_2500baseX_Full))
++ ret |= 0x20;
++ else
++ ret &= ~0x20;
++
++ phy_write_mmd(phydev, MDIO_MMD_AN, MDIO_AN_ADVERTISE + 1, ret);
++
++ /* Set up Advertisement register 1 last */
++ ret = phy_read_mmd(phydev, MDIO_MMD_AN, MDIO_AN_ADVERTISE);
++ if (ret < 0)
++ return ret;
++
++ if (phydev->supported & SUPPORTED_Pause)
++ ret |= 0x400;
++ else
++ ret &= ~0x400;
++
++ if (phydev->supported & SUPPORTED_Asym_Pause)
++ ret |= 0x800;
++ else
++ ret &= ~0x800;
++
++ /* We don't intend to perform XNP */
++ ret &= ~XNP_NP_EXCHANGE;
++
++ phy_write_mmd(phydev, MDIO_MMD_AN, MDIO_AN_ADVERTISE, ret);
++
++ return 0;
++}
++
++static int amd_xgbe_phy_soft_reset(struct phy_device *phydev)
++{
++ int count, ret;
++
++ ret = phy_read_mmd(phydev, MDIO_MMD_PCS, MDIO_CTRL1);
++ if (ret < 0)
++ return ret;
++
++ ret |= MDIO_CTRL1_RESET;
++ phy_write_mmd(phydev, MDIO_MMD_PCS, MDIO_CTRL1, ret);
++
++ count = 50;
++ do {
++ msleep(20);
++ ret = phy_read_mmd(phydev, MDIO_MMD_PCS, MDIO_CTRL1);
++ if (ret < 0)
++ return ret;
++ } while ((ret & MDIO_CTRL1_RESET) && --count);
++
++ if (ret & MDIO_CTRL1_RESET)
++ return -ETIMEDOUT;
++
++ /* Disable auto-negotiation for now */
++ ret = amd_xgbe_phy_disable_an(phydev);
++ if (ret < 0)
++ return ret;
++
++ /* Clear auto-negotiation interrupts */
++ phy_write_mmd(phydev, MDIO_MMD_AN, MDIO_AN_INT, 0);
++
++ return 0;
++}
++
++static int amd_xgbe_phy_config_init(struct phy_device *phydev)
++{
++ struct amd_xgbe_phy_priv *priv = phydev->priv;
++ struct net_device *netdev = phydev->attached_dev;
++ int ret;
++
++ if (!priv->an_irq_allocated) {
++ /* Allocate the auto-negotiation workqueue and interrupt */
++ snprintf(priv->an_irq_name, sizeof(priv->an_irq_name) - 1,
++ "%s-pcs", netdev_name(netdev));
++
++ priv->an_workqueue =
++ create_singlethread_workqueue(priv->an_irq_name);
++ if (!priv->an_workqueue) {
++ netdev_err(netdev, "phy workqueue creation failed\n");
++ return -ENOMEM;
++ }
++
++ ret = devm_request_irq(priv->dev, priv->an_irq,
++ amd_xgbe_an_isr, 0, priv->an_irq_name,
++ priv);
++ if (ret) {
++ netdev_err(netdev, "phy irq request failed\n");
++ destroy_workqueue(priv->an_workqueue);
++ return ret;
++ }
++
++ priv->an_irq_allocated = 1;
++ }
++
++ ret = phy_read_mmd(phydev, MDIO_MMD_PMAPMD, MDIO_PMA_10GBR_FEC_ABILITY);
++ if (ret < 0)
++ return ret;
++ priv->fec_ability = ret & XGBE_PHY_FEC_MASK;
++
++ /* Initialize supported features */
++ phydev->supported = SUPPORTED_Autoneg;
++ phydev->supported |= SUPPORTED_Pause | SUPPORTED_Asym_Pause;
++ phydev->supported |= SUPPORTED_Backplane;
++ phydev->supported |= SUPPORTED_10000baseKR_Full;
++ switch (priv->speed_set) {
++ case AMD_XGBE_PHY_SPEEDSET_1000_10000:
++ phydev->supported |= SUPPORTED_1000baseKX_Full;
++ break;
++ case AMD_XGBE_PHY_SPEEDSET_2500_10000:
++ phydev->supported |= SUPPORTED_2500baseX_Full;
++ break;
++ }
++
++ if (priv->fec_ability & XGBE_PHY_FEC_ENABLE)
++ phydev->supported |= SUPPORTED_10000baseR_FEC;
++
++ phydev->advertising = phydev->supported;
++
++ /* Set initial mode - call the mode setting routines
++ * directly to insure we are properly configured
++ */
++ if (phydev->supported & SUPPORTED_10000baseKR_Full)
++ ret = amd_xgbe_phy_xgmii_mode(phydev);
++ else if (phydev->supported & SUPPORTED_1000baseKX_Full)
++ ret = amd_xgbe_phy_gmii_mode(phydev);
++ else if (phydev->supported & SUPPORTED_2500baseX_Full)
++ ret = amd_xgbe_phy_gmii_2500_mode(phydev);
++ else
++ ret = -EINVAL;
++ if (ret < 0)
++ return ret;
++
++ /* Set up advertisement registers based on current settings */
++ ret = amd_xgbe_an_init(phydev);
++ if (ret)
++ return ret;
++
++ /* Enable auto-negotiation interrupts */
++ phy_write_mmd(phydev, MDIO_MMD_AN, MDIO_AN_INTMASK, 0x07);
++
++ return 0;
++}
++
++static int amd_xgbe_phy_setup_forced(struct phy_device *phydev)
++{
++ int ret;
++
++ /* Disable auto-negotiation */
++ ret = amd_xgbe_phy_disable_an(phydev);
++ if (ret < 0)
++ return ret;
++
++ /* Validate/Set specified speed */
++ switch (phydev->speed) {
++ case SPEED_10000:
++ ret = amd_xgbe_phy_set_mode(phydev, AMD_XGBE_MODE_KR);
++ break;
++
++ case SPEED_2500:
++ case SPEED_1000:
++ ret = amd_xgbe_phy_set_mode(phydev, AMD_XGBE_MODE_KX);
++ break;
++
++ default:
++ ret = -EINVAL;
++ }
++
++ if (ret < 0)
++ return ret;
++
++ /* Validate duplex mode */
++ if (phydev->duplex != DUPLEX_FULL)
++ return -EINVAL;
++
++ phydev->pause = 0;
++ phydev->asym_pause = 0;
++
++ return 0;
++}
++
++static int __amd_xgbe_phy_config_aneg(struct phy_device *phydev)
++{
++ struct amd_xgbe_phy_priv *priv = phydev->priv;
++ u32 mmd_mask = phydev->c45_ids.devices_in_package;
++ int ret;
++
++ if (phydev->autoneg != AUTONEG_ENABLE)
++ return amd_xgbe_phy_setup_forced(phydev);
++
++ /* Make sure we have the AN MMD present */
++ if (!(mmd_mask & MDIO_DEVS_AN))
++ return -EINVAL;
++
++ /* Disable auto-negotiation interrupt */
++ disable_irq(priv->an_irq);
++
++ /* Start auto-negotiation in a supported mode */
++ if (phydev->supported & SUPPORTED_10000baseKR_Full)
++ ret = amd_xgbe_phy_set_mode(phydev, AMD_XGBE_MODE_KR);
++ else if ((phydev->supported & SUPPORTED_1000baseKX_Full) ||
++ (phydev->supported & SUPPORTED_2500baseX_Full))
++ ret = amd_xgbe_phy_set_mode(phydev, AMD_XGBE_MODE_KX);
++ else
++ ret = -EINVAL;
++ if (ret < 0) {
++ enable_irq(priv->an_irq);
++ return ret;
++ }
++
++ /* Disable and stop any in progress auto-negotiation */
++ ret = amd_xgbe_phy_disable_an(phydev);
++ if (ret < 0)
++ return ret;
++
++ /* Clear any auto-negotitation interrupts */
++ phy_write_mmd(phydev, MDIO_MMD_AN, MDIO_AN_INT, 0);
++
++ priv->an_result = AMD_XGBE_AN_READY;
++ priv->an_state = AMD_XGBE_AN_READY;
++ priv->kr_state = AMD_XGBE_RX_BPA;
++ priv->kx_state = AMD_XGBE_RX_BPA;
++
++ /* Re-enable auto-negotiation interrupt */
++ enable_irq(priv->an_irq);
++
++ /* Set up advertisement registers based on current settings */
++ ret = amd_xgbe_an_init(phydev);
++ if (ret)
++ return ret;
++
++ /* Enable and start auto-negotiation */
++ ret = phy_read_mmd(phydev, MDIO_MMD_AN, MDIO_AN_KR_CTRL);
++ if (ret < 0)
++ return ret;
++
++ ret |= MDIO_KR_CTRL_PDETECT;
++ phy_write_mmd(phydev, MDIO_MMD_AN, MDIO_AN_KR_CTRL, ret);
++
++ return amd_xgbe_phy_restart_an(phydev);
++}
++
++static int amd_xgbe_phy_config_aneg(struct phy_device *phydev)
++{
++ struct amd_xgbe_phy_priv *priv = phydev->priv;
++ int ret;
++
++ mutex_lock(&priv->an_mutex);
++
++ ret = __amd_xgbe_phy_config_aneg(phydev);
++
++ mutex_unlock(&priv->an_mutex);
++
++ return ret;
++}
++
++static int amd_xgbe_phy_aneg_done(struct phy_device *phydev)
++{
++ struct amd_xgbe_phy_priv *priv = phydev->priv;
++
++ return (priv->an_result == AMD_XGBE_AN_COMPLETE);
++}
++
++static int amd_xgbe_phy_update_link(struct phy_device *phydev)
++{
++ struct amd_xgbe_phy_priv *priv = phydev->priv;
++ unsigned int check_again, autoneg;
++ int ret;
++
++ /* If we're doing auto-negotiation don't report link down */
++ if (priv->an_state != AMD_XGBE_AN_READY) {
++ phydev->link = 1;
++ return 0;
++ }
++
++ /* Since the device can be in the wrong mode when a link is
++ * (re-)established (cable connected after the interface is
++ * up, etc.), the link status may report no link. If there
++ * is no link, try switching modes and checking the status
++ * again if auto negotiation is enabled.
++ */
++ check_again = (phydev->autoneg == AUTONEG_ENABLE) ? 1 : 0;
++again:
++ /* Link status is latched low, so read once to clear
++ * and then read again to get current state
++ */
++ ret = phy_read_mmd(phydev, MDIO_MMD_PCS, MDIO_STAT1);
++ if (ret < 0)
++ return ret;
++
++ ret = phy_read_mmd(phydev, MDIO_MMD_PCS, MDIO_STAT1);
++ if (ret < 0)
++ return ret;
++
++ phydev->link = (ret & MDIO_STAT1_LSTATUS) ? 1 : 0;
++
++ if (!phydev->link) {
++ if (check_again) {
++ ret = amd_xgbe_phy_switch_mode(phydev);
++ if (ret < 0)
++ return ret;
++ check_again = 0;
++ goto again;
++ }
++ }
++
++ autoneg = (phydev->link && !priv->link) ? 1 : 0;
++ priv->link = phydev->link;
++ if (autoneg) {
++ /* Link is (back) up, re-start auto-negotiation */
++ ret = amd_xgbe_phy_config_aneg(phydev);
++ if (ret < 0)
++ return ret;
++ }
++
++ return 0;
++}
++
++static int amd_xgbe_phy_read_status(struct phy_device *phydev)
++{
++ struct amd_xgbe_phy_priv *priv = phydev->priv;
++ u32 mmd_mask = phydev->c45_ids.devices_in_package;
++ int ret, ad_ret, lp_ret;
++
++ ret = amd_xgbe_phy_update_link(phydev);
++ if (ret)
++ return ret;
++
++ if ((phydev->autoneg == AUTONEG_ENABLE) &&
++ !priv->parallel_detect) {
++ if (!(mmd_mask & MDIO_DEVS_AN))
++ return -EINVAL;
++
++ if (!amd_xgbe_phy_aneg_done(phydev))
++ return 0;
++
++ /* Compare Advertisement and Link Partner register 1 */
++ ad_ret = phy_read_mmd(phydev, MDIO_MMD_AN, MDIO_AN_ADVERTISE);
++ if (ad_ret < 0)
++ return ad_ret;
++ lp_ret = phy_read_mmd(phydev, MDIO_MMD_AN, MDIO_AN_LPA);
++ if (lp_ret < 0)
++ return lp_ret;
++
++ ad_ret &= lp_ret;
++ phydev->pause = (ad_ret & 0x400) ? 1 : 0;
++ phydev->asym_pause = (ad_ret & 0x800) ? 1 : 0;
++
++ /* Compare Advertisement and Link Partner register 2 */
++ ad_ret = phy_read_mmd(phydev, MDIO_MMD_AN,
++ MDIO_AN_ADVERTISE + 1);
++ if (ad_ret < 0)
++ return ad_ret;
++ lp_ret = phy_read_mmd(phydev, MDIO_MMD_AN, MDIO_AN_LPA + 1);
++ if (lp_ret < 0)
++ return lp_ret;
++
++ ad_ret &= lp_ret;
++ if (ad_ret & 0x80) {
++ phydev->speed = SPEED_10000;
++ ret = amd_xgbe_phy_set_mode(phydev, AMD_XGBE_MODE_KR);
++ if (ret)
++ return ret;
++ } else {
++ switch (priv->speed_set) {
++ case AMD_XGBE_PHY_SPEEDSET_1000_10000:
++ phydev->speed = SPEED_1000;
++ break;
++
++ case AMD_XGBE_PHY_SPEEDSET_2500_10000:
++ phydev->speed = SPEED_2500;
++ break;
++ }
++
++ ret = amd_xgbe_phy_set_mode(phydev, AMD_XGBE_MODE_KX);
++ if (ret)
++ return ret;
++ }
++
++ phydev->duplex = DUPLEX_FULL;
++ } else {
++ if (amd_xgbe_phy_in_kr_mode(phydev)) {
++ phydev->speed = SPEED_10000;
++ } else {
++ switch (priv->speed_set) {
++ case AMD_XGBE_PHY_SPEEDSET_1000_10000:
++ phydev->speed = SPEED_1000;
++ break;
++
++ case AMD_XGBE_PHY_SPEEDSET_2500_10000:
++ phydev->speed = SPEED_2500;
++ break;
++ }
++ }
++ phydev->duplex = DUPLEX_FULL;
++ phydev->pause = 0;
++ phydev->asym_pause = 0;
++ }
++
++ return 0;
++}
++
++static int amd_xgbe_phy_suspend(struct phy_device *phydev)
++{
++ struct amd_xgbe_phy_priv *priv = phydev->priv;
++ int ret;
++
++ mutex_lock(&phydev->lock);
++
++ ret = phy_read_mmd(phydev, MDIO_MMD_PCS, MDIO_CTRL1);
++ if (ret < 0)
++ goto unlock;
++
++ priv->lpm_ctrl = ret;
++
++ ret |= MDIO_CTRL1_LPOWER;
++ phy_write_mmd(phydev, MDIO_MMD_PCS, MDIO_CTRL1, ret);
++
++ ret = 0;
++
++unlock:
++ mutex_unlock(&phydev->lock);
++
++ return ret;
++}
++
++static int amd_xgbe_phy_resume(struct phy_device *phydev)
++{
++ struct amd_xgbe_phy_priv *priv = phydev->priv;
++
++ mutex_lock(&phydev->lock);
++
++ priv->lpm_ctrl &= ~MDIO_CTRL1_LPOWER;
++ phy_write_mmd(phydev, MDIO_MMD_PCS, MDIO_CTRL1, priv->lpm_ctrl);
++
++ mutex_unlock(&phydev->lock);
++
++ return 0;
++}
++
++static unsigned int amd_xgbe_phy_resource_count(struct platform_device *pdev,
++ unsigned int type)
++{
++ unsigned int count;
++ int i;
++
++ for (i = 0, count = 0; i < pdev->num_resources; i++) {
++ struct resource *r = &pdev->resource[i];
++
++ if (type == resource_type(r))
++ count++;
++ }
++
++ return count;
++}
++
++static int amd_xgbe_phy_probe(struct phy_device *phydev)
++{
++ struct amd_xgbe_phy_priv *priv;
++ struct platform_device *phy_pdev;
++ struct device *dev, *phy_dev;
++ unsigned int phy_resnum, phy_irqnum;
++ int ret;
++
++ if (!phydev->bus || !phydev->bus->parent)
++ return -EINVAL;
++
++ dev = phydev->bus->parent;
++
++ priv = devm_kzalloc(dev, sizeof(*priv), GFP_KERNEL);
++ if (!priv)
++ return -ENOMEM;
++
++ priv->pdev = to_platform_device(dev);
++ priv->adev = ACPI_COMPANION(dev);
++ priv->dev = dev;
++ priv->phydev = phydev;
++ mutex_init(&priv->an_mutex);
++ INIT_WORK(&priv->an_irq_work, amd_xgbe_an_irq_work);
++ INIT_WORK(&priv->an_work, amd_xgbe_an_state_machine);
++
++ if (!priv->adev || acpi_disabled) {
++ struct device_node *bus_node;
++ struct device_node *phy_node;
++
++ bus_node = priv->dev->of_node;
++ phy_node = of_parse_phandle(bus_node, "phy-handle", 0);
++ if (!phy_node) {
++ dev_err(dev, "unable to parse phy-handle\n");
++ ret = -EINVAL;
++ goto err_priv;
++ }
++
++ phy_pdev = of_find_device_by_node(phy_node);
++ of_node_put(phy_node);
++
++ if (!phy_pdev) {
++ dev_err(dev, "unable to obtain phy device\n");
++ ret = -EINVAL;
++ goto err_priv;
++ }
++
++ phy_resnum = 0;
++ phy_irqnum = 0;
++ } else {
++ /* In ACPI, the XGBE and PHY resources are the grouped
++ * together with the PHY resources at the end
++ */
++ phy_pdev = priv->pdev;
++ phy_resnum = amd_xgbe_phy_resource_count(phy_pdev,
++ IORESOURCE_MEM) - 2;
++ phy_irqnum = amd_xgbe_phy_resource_count(phy_pdev,
++ IORESOURCE_IRQ) - 1;
++ }
++ phy_dev = &phy_pdev->dev;
++
++ /* Get the device mmio areas */
++ priv->rxtx_res = platform_get_resource(phy_pdev, IORESOURCE_MEM,
++ phy_resnum++);
++ priv->rxtx_regs = devm_ioremap_resource(dev, priv->rxtx_res);
++ if (IS_ERR(priv->rxtx_regs)) {
++ dev_err(dev, "rxtx ioremap failed\n");
++ ret = PTR_ERR(priv->rxtx_regs);
++ goto err_put;
++ }
++
++ /* All xgbe phy devices share the CMU registers so retrieve
++ * the resource and do the ioremap directly rather than
++ * the devm_ioremap_resource call
++ */
++ priv->cmu_res = platform_get_resource(phy_pdev, IORESOURCE_MEM,
++ phy_resnum++);
++ if (!priv->cmu_res) {
++ dev_err(dev, "cmu invalid resource\n");
++ ret = -EINVAL;
++ goto err_rxtx;
++ }
++ priv->cmu_regs = devm_ioremap_nocache(dev, priv->cmu_res->start,
++ resource_size(priv->cmu_res));
++ if (!priv->cmu_regs) {
++ dev_err(dev, "cmu ioremap failed\n");
++ ret = -ENOMEM;
++ goto err_rxtx;
++ }
++
++ /* Get the auto-negotiation interrupt */
++ ret = platform_get_irq(phy_pdev, phy_irqnum);
++ if (ret < 0) {
++ dev_err(dev, "platform_get_irq failed\n");
++ goto err_cmu;
++ }
++ if (priv->adev && !acpi_disabled && !phy_irqnum) {
++ struct irq_data *d = irq_get_irq_data(ret);
++ if (!d) {
++ dev_err(dev, "unable to set AN interrupt\n");
++ ret = -EINVAL;
++ goto err_cmu;
++ }
++
++#ifdef CONFIG_ACPI
++ ret = acpi_register_gsi(dev, d->hwirq - 2,
++ ACPI_LEVEL_SENSITIVE, ACPI_ACTIVE_HIGH);
++#else
++ ret = -EINVAL;
++#endif
++ if (ret < 0) {
++ dev_err(dev, "unable to set AN interrupt\n");
++ goto err_cmu;
++ }
++ }
++ priv->an_irq = ret;
++
++ /* Get the device serdes channel property */
++ ret = device_property_read_u32(phy_dev, XGBE_PHY_CHANNEL_PROPERTY,
++ &priv->serdes_channel);
++ if (ret) {
++ dev_err(dev, "invalid %s property\n",
++ XGBE_PHY_CHANNEL_PROPERTY);
++ goto err_cmu;
++ }
++
++ /* Get the device speed set property */
++ ret = device_property_read_u32(phy_dev, XGBE_PHY_SPEEDSET_PROPERTY,
++ &priv->speed_set);
++ if (ret) {
++ dev_err(dev, "invalid %s property\n",
++ XGBE_PHY_SPEEDSET_PROPERTY);
++ goto err_cmu;
++ }
++
++ switch (priv->speed_set) {
++ case AMD_XGBE_PHY_SPEEDSET_1000_10000:
++ case AMD_XGBE_PHY_SPEEDSET_2500_10000:
++ break;
++ default:
++ dev_err(dev, "invalid %s property\n",
++ XGBE_PHY_SPEEDSET_PROPERTY);
++ ret = -EINVAL;
++ goto err_cmu;
++ }
++
++ if (device_property_present(phy_dev, XGBE_PHY_BLWC_PROPERTY)) {
++ ret = device_property_read_u32_array(phy_dev,
++ XGBE_PHY_BLWC_PROPERTY,
++ priv->serdes_blwc,
++ XGBE_PHY_SPEEDS);
++ if (ret) {
++ dev_err(dev, "invalid %s property\n",
++ XGBE_PHY_BLWC_PROPERTY);
++ goto err_cmu;
++ }
++ } else {
++ memcpy(priv->serdes_blwc, amd_xgbe_phy_serdes_blwc,
++ sizeof(priv->serdes_blwc));
++ }
++
++ if (device_property_present(phy_dev, XGBE_PHY_CDR_RATE_PROPERTY)) {
++ ret = device_property_read_u32_array(phy_dev,
++ XGBE_PHY_CDR_RATE_PROPERTY,
++ priv->serdes_cdr_rate,
++ XGBE_PHY_SPEEDS);
++ if (ret) {
++ dev_err(dev, "invalid %s property\n",
++ XGBE_PHY_CDR_RATE_PROPERTY);
++ goto err_cmu;
++ }
++ } else {
++ memcpy(priv->serdes_cdr_rate, amd_xgbe_phy_serdes_cdr_rate,
++ sizeof(priv->serdes_cdr_rate));
++ }
++
++ if (device_property_present(phy_dev, XGBE_PHY_PQ_SKEW_PROPERTY)) {
++ ret = device_property_read_u32_array(phy_dev,
++ XGBE_PHY_PQ_SKEW_PROPERTY,
++ priv->serdes_pq_skew,
++ XGBE_PHY_SPEEDS);
++ if (ret) {
++ dev_err(dev, "invalid %s property\n",
++ XGBE_PHY_PQ_SKEW_PROPERTY);
++ goto err_cmu;
++ }
++ } else {
++ memcpy(priv->serdes_pq_skew, amd_xgbe_phy_serdes_pq_skew,
++ sizeof(priv->serdes_pq_skew));
++ }
++
++ if (device_property_present(phy_dev, XGBE_PHY_TX_AMP_PROPERTY)) {
++ ret = device_property_read_u32_array(phy_dev,
++ XGBE_PHY_TX_AMP_PROPERTY,
++ priv->serdes_tx_amp,
++ XGBE_PHY_SPEEDS);
++ if (ret) {
++ dev_err(dev, "invalid %s property\n",
++ XGBE_PHY_TX_AMP_PROPERTY);
++ goto err_cmu;
++ }
++ } else {
++ memcpy(priv->serdes_tx_amp, amd_xgbe_phy_serdes_tx_amp,
++ sizeof(priv->serdes_tx_amp));
++ }
++
++ priv->link = 1;
++
++ phydev->priv = priv;
++
++ if (!priv->adev || acpi_disabled)
++ platform_device_put(phy_pdev);
++
++ return 0;
++
++err_cmu:
++ devm_iounmap(dev, priv->cmu_regs);
++
++err_rxtx:
++ devm_iounmap(dev, priv->rxtx_regs);
++ devm_release_mem_region(dev, priv->rxtx_res->start,
++ resource_size(priv->rxtx_res));
++
++err_put:
++ if (!priv->adev || acpi_disabled)
++ platform_device_put(phy_pdev);
++
++err_priv:
++ devm_kfree(dev, priv);
++
++ return ret;
++}
++
++static void amd_xgbe_phy_remove(struct phy_device *phydev)
++{
++ struct amd_xgbe_phy_priv *priv = phydev->priv;
++ struct device *dev = priv->dev;
++
++ if (priv->an_irq_allocated) {
++ devm_free_irq(dev, priv->an_irq, priv);
++
++ flush_workqueue(priv->an_workqueue);
++ destroy_workqueue(priv->an_workqueue);
++ }
++
++ devm_iounmap(dev, priv->cmu_regs);
++
++ devm_iounmap(dev, priv->rxtx_regs);
++ devm_release_mem_region(dev, priv->rxtx_res->start,
++ resource_size(priv->rxtx_res));
++
++ devm_kfree(dev, priv);
++}
++
++static int amd_xgbe_match_phy_device(struct phy_device *phydev)
++{
++ return phydev->c45_ids.device_ids[MDIO_MMD_PCS] == XGBE_PHY_ID;
++}
++
++static struct phy_driver amd_xgbe_phy_a0_driver[] = {
++ {
++ .phy_id = XGBE_PHY_ID,
++ .phy_id_mask = XGBE_PHY_MASK,
++ .name = "AMD XGBE PHY A0",
++ .features = 0,
++ .probe = amd_xgbe_phy_probe,
++ .remove = amd_xgbe_phy_remove,
++ .soft_reset = amd_xgbe_phy_soft_reset,
++ .config_init = amd_xgbe_phy_config_init,
++ .suspend = amd_xgbe_phy_suspend,
++ .resume = amd_xgbe_phy_resume,
++ .config_aneg = amd_xgbe_phy_config_aneg,
++ .aneg_done = amd_xgbe_phy_aneg_done,
++ .read_status = amd_xgbe_phy_read_status,
++ .match_phy_device = amd_xgbe_match_phy_device,
++ .driver = {
++ .owner = THIS_MODULE,
++ },
++ },
++};
++
++module_phy_driver(amd_xgbe_phy_a0_driver);
++
++static struct mdio_device_id __maybe_unused amd_xgbe_phy_a0_ids[] = {
++ { XGBE_PHY_ID, XGBE_PHY_MASK },
++ { }
++};
++MODULE_DEVICE_TABLE(mdio, amd_xgbe_phy_a0_ids);
+--
+1.9.3
+
diff --git a/arm64-avoid-needing-console-to-enable-serial-console.patch b/arm64-avoid-needing-console-to-enable-serial-console.patch
new file mode 100644
index 000000000..b9b11072c
--- /dev/null
+++ b/arm64-avoid-needing-console-to-enable-serial-console.patch
@@ -0,0 +1,46 @@
+From 3bba3a1990d065e30630c5c67ed32689106aef57 Mon Sep 17 00:00:00 2001
+From: Mark Salter <msalter@redhat.com>
+Date: Wed, 25 Mar 2015 14:17:50 -0400
+Subject: [PATCH 4/4] arm64: avoid needing console= to enable serial console
+
+Tell kernel to prefer one of the serial ports for console on
+platforms currently supported (pl011 or 8250). console= on
+command line will override these assumed preferences. This is
+just a hack to get the behavior we want from DT provided by
+firmware.
+
+Signed-off-by: Mark Salter <msalter@redhat.com>
+---
+ arch/arm64/kernel/setup.c | 19 +++++++++++++++++++
+ 1 file changed, 19 insertions(+)
+
+diff --git a/arch/arm64/kernel/setup.c b/arch/arm64/kernel/setup.c
+index e8420f6..8473381 100644
+--- a/arch/arm64/kernel/setup.c
++++ b/arch/arm64/kernel/setup.c
+@@ -547,3 +547,22 @@ const struct seq_operations cpuinfo_op = {
+ .stop = c_stop,
+ .show = c_show
+ };
++
++/*
++ * Temporary hack to avoid need for console= on command line
++ */
++static int __init arm64_console_setup(void)
++{
++ /* Allow cmdline to override our assumed preferences */
++ if (console_set_on_cmdline)
++ return 0;
++
++ if (IS_ENABLED(CONFIG_SERIAL_AMBA_PL011))
++ add_preferred_console("ttyAMA", 0, "115200");
++
++ if (IS_ENABLED(CONFIG_SERIAL_8250))
++ add_preferred_console("ttyS", 0, "115200");
++
++ return 0;
++}
++early_initcall(arm64_console_setup);
+--
+1.9.3
+
diff --git a/kernel.spec b/kernel.spec
index caa995802..b90b365ca 100644
--- a/kernel.spec
+++ b/kernel.spec
@@ -578,6 +578,9 @@ Patch15000: watchdog-Disable-watchdog-on-virtual-machines.patch
# ARM64
Patch21000: net-amd-Add-xgbe-a0-driver.patch
+Patch21001: amd-xgbe-phy-a0-Add-support-for-XGBE-PHY-on-A0.patch
+Patch21002: arm64-avoid-needing-console-to-enable-serial-console.patch
+Patch21003: usb-make-xhci-platform-driver-use-64-bit-or-32-bit-D.patch
# ARMv7
Patch21020: ARM-tegra-usb-no-reset.patch
@@ -1211,6 +1214,9 @@ ApplyPatch lib-cpumask-Make-CPUMASK_OFFSTACK-usable-without-deb.patch
# ARM64
ApplyPatch net-amd-Add-xgbe-a0-driver.patch
+ApplyPatch amd-xgbe-phy-a0-Add-support-for-XGBE-PHY-on-A0.patch
+ApplyPatch arm64-avoid-needing-console-to-enable-serial-console.patch
+ApplyPatch usb-make-xhci-platform-driver-use-64-bit-or-32-bit-D.patch
#
# ARM
@@ -2227,6 +2233,9 @@ fi
#
#
%changelog
+* Wed Mar 25 2015 Peter Robinson <pbrobinson@fedoraproject.org>
+- Add aarch64 patches to fix mustang usb, seattle eth, and console settings
+
* Wed Mar 25 2015 Josh Boyer <jwboyer@fedoraproject.org> - 4.0.0-0.rc5.git2.4
- Add patches to fix a few more i915 hangs/oopses
diff --git a/usb-make-xhci-platform-driver-use-64-bit-or-32-bit-D.patch b/usb-make-xhci-platform-driver-use-64-bit-or-32-bit-D.patch
new file mode 100644
index 000000000..37ada093b
--- /dev/null
+++ b/usb-make-xhci-platform-driver-use-64-bit-or-32-bit-D.patch
@@ -0,0 +1,44 @@
+From 30b01a7a85c0a2993870f7ed93059f9957bff59f Mon Sep 17 00:00:00 2001
+From: Mark Langsdorf <mlangsdo@redhat.com>
+Date: Wed, 25 Mar 2015 14:12:51 -0400
+Subject: [PATCH 3/4] usb: make xhci platform driver use 64 bit or 32 bit DMA
+
+The xhci platform driver needs to work on systems that either only
+support 64-bit DMA or only support 32-bit DMA. Attempt to set a
+coherent dma mask for 64-bit DMA, and attempt again with 32-bit
+DMA if that fails.
+
+Signed-off-by: Mark Langsdorf <mlangsdo@redhat.com>
+---
+ drivers/usb/host/xhci-plat.c | 15 +++++++--------
+ 1 file changed, 7 insertions(+), 8 deletions(-)
+
+diff --git a/drivers/usb/host/xhci-plat.c b/drivers/usb/host/xhci-plat.c
+index 0e11d61..cc5ca2c 100644
+--- a/drivers/usb/host/xhci-plat.c
++++ b/drivers/usb/host/xhci-plat.c
+@@ -83,14 +83,13 @@ static int xhci_plat_probe(struct platform_device *pdev)
+ if (irq < 0)
+ return -ENODEV;
+
+- /* Initialize dma_mask and coherent_dma_mask to 32-bits */
+- ret = dma_set_coherent_mask(&pdev->dev, DMA_BIT_MASK(32));
+- if (ret)
+- return ret;
+- if (!pdev->dev.dma_mask)
+- pdev->dev.dma_mask = &pdev->dev.coherent_dma_mask;
+- else
+- dma_set_mask(&pdev->dev, DMA_BIT_MASK(32));
++ /* Try setting the coherent_dma_mask to 64 bits, then try 32 bits */
++ ret = dma_set_mask_and_coherent(&pdev->dev, DMA_BIT_MASK(64));
++ if (ret) {
++ ret = dma_set_mask_and_coherent(&pdev->dev, DMA_BIT_MASK(32));
++ if (ret)
++ return ret;
++ }
+
+ hcd = usb_create_hcd(driver, &pdev->dev, dev_name(&pdev->dev));
+ if (!hcd)
+--
+1.9.3
+