Merge remote-tracking branch 'origin/master' into rawhide-user-thl-vanilla-fedorakernel-4.18.0-0.rc0.git7.1.vanilla.knurd.1.fc29kernel-4.18.0-0.rc0.git7.1.vanilla.knurd.1.fc28kernel-4.18.0-0.rc0.git7.1.vanilla.knurd.1.fc27

27 files changed, 80 insertions, 1133 deletions

diff --git a/0001-Revert-debugfs-inode-debugfs_create_dir-uses-mode-pe.patch b/0001-Revert-debugfs-inode-debugfs_create_dir-uses-mode-pe.patch
new file mode 100644
index 000000000..7297c8bff
--- /dev/null
+++ b/0001-Revert-debugfs-inode-debugfs_create_dir-uses-mode-pe.patch
@@ -0,0 +1,33 @@
+From 9c625d3a4eb215369b10b075b2006f9c3035c93f Mon Sep 17 00:00:00 2001
+From: Laura Abbott <labbott@redhat.com>
+Date: Tue, 12 Jun 2018 08:48:18 -0700
+Subject: [PATCH] Revert "debugfs: inode: debugfs_create_dir uses mode
+ permission from parent"
+
+This reverts commit 95cde3c59966f6371b6bcd9e4e2da2ba64ee9775.
+
+A custom revert due to secure boot lockdown conflicts.
+
+Signed-off-by: Laura Abbott <labbott@redhat.com>
+---
+ fs/debugfs/inode.c | 4 +---
+ 1 file changed, 1 insertion(+), 3 deletions(-)
+
+diff --git a/fs/debugfs/inode.c b/fs/debugfs/inode.c
+index e392ca19bdd4..4daec17b8215 100644
+--- a/fs/debugfs/inode.c
++++ b/fs/debugfs/inode.c
+@@ -538,9 +538,7 @@ struct dentry *debugfs_create_dir(const char *name, struct dentry *parent)
+ 	if (unlikely(!inode))
+ 		return failed_creating(dentry);
+ 
+-	if (!parent)
+-		parent = debugfs_mount->mnt_root;
+-	inode->i_mode = S_IFDIR | ((d_inode(parent)->i_mode & 0770));
++	inode->i_mode = S_IFDIR | S_IRWXU | S_IRUGO | S_IXUGO;
+ 	inode->i_op = &debugfs_dir_inode_operations;
+ 	inode->i_fop = &simple_dir_operations;
+ 
+-- 
+2.17.0
+
diff --git a/arm-dts-Add-am335x-pocketbeagle.patch b/arm-dts-Add-am335x-pocketbeagle.patch
deleted file mode 100644
index 76fab6b55..000000000
--- a/arm-dts-Add-am335x-pocketbeagle.patch
+++ /dev/null
@@ -1,432 +0,0 @@
-From patchwork Tue Apr 17 17:14:04 2018
-Content-Type: text/plain; charset="utf-8"
-MIME-Version: 1.0
-Content-Transfer-Encoding: 7bit
-Subject: [v3] ARM: dts: Add am335x-pocketbeagle
-From: Robert Nelson <robertcnelson@gmail.com>
-X-Patchwork-Id: 10346089
-Message-Id: <20180417171404.13624-1-robertcnelson@gmail.com>
-To: tony@atomide.com,
-	devicetree@vger.kernel.org
-Cc: Drew Fustini <drew@beagleboard.org>,
- Peter Robinson <pbrobinson@redhat.com>, 
- Jason Kridner <jkridner@beagleboard.org>, linux-omap@vger.kernel.org, 
- Robert Nelson <robertcnelson@gmail.com>,
- linux-arm-kernel@lists.infradead.org
-Date: Tue, 17 Apr 2018 12:14:04 -0500
-
-PocketBeagle is an ultra-tiny-yet-complete open-source USB-key-fob computer.
-
-This board family can be indentified by the A335PBGL in the at24 eeprom:
-A2: [aa 55 33 ee 41 33 33 35  50 42 47 4c 30 30 41 32 |.U3.A335PBGL00A2|]
-
-http://beagleboard.org/pocket
-https://github.com/beagleboard/pocketbeagle
-
-Signed-off-by: Robert Nelson <robertcnelson@gmail.com>
-CC: Tony Lindgren <tony@atomide.com>
-CC: Jason Kridner <jkridner@beagleboard.org>
-CC: Drew Fustini <drew@beagleboard.org>
-CC: Peter Robinson <pbrobinson@redhat.com>
----
-Changes in v3:
-- Fix: Board eeprom in subject message. (accidently copied PocketBone)
-Changes in v2:
-- Use SPDX tags.
-- Use eeprom@50, remove repeated node and fix  and remove '_' to fix node_name_chars_strict Warning
-- Fix: PocketBeagle Name in Subject (not PocketBeagle Blue)
-- Fix: leds remove '_' to fix node_name_chars_strict warning
-- Fix: node_name_chars_strict pinmux_*_pins label's.
----
- arch/arm/boot/dts/Makefile                   |   1 +
- arch/arm/boot/dts/am335x-osd335x-common.dtsi | 124 ++++++++++
- arch/arm/boot/dts/am335x-pocketbeagle.dts    | 237 +++++++++++++++++++
- 3 files changed, 362 insertions(+)
- create mode 100644 arch/arm/boot/dts/am335x-osd335x-common.dtsi
- create mode 100644 arch/arm/boot/dts/am335x-pocketbeagle.dts
-
-diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
-index 7e2424957809..5a09ff15743b 100644
---- a/arch/arm/boot/dts/Makefile
-+++ b/arch/arm/boot/dts/Makefile
-@@ -688,6 +688,7 @@ dtb-$(CONFIG_SOC_AM33XX) += \
- 	am335x-pdu001.dtb \
- 	am335x-pepper.dtb \
- 	am335x-phycore-rdk.dtb \
-+	am335x-pocketbeagle.dtb \
- 	am335x-shc.dtb \
- 	am335x-sbc-t335.dtb \
- 	am335x-sl50.dtb \
-diff --git a/arch/arm/boot/dts/am335x-osd335x-common.dtsi b/arch/arm/boot/dts/am335x-osd335x-common.dtsi
-new file mode 100644
-index 000000000000..d2150d207b7a
---- /dev/null
-+++ b/arch/arm/boot/dts/am335x-osd335x-common.dtsi
-@@ -0,0 +1,124 @@
-+// SPDX-License-Identifier: GPL-2.0
-+/*
-+ * Copyright (C) 2012 Texas Instruments Incorporated - http://www.ti.com/
-+ *
-+ * Author: Robert Nelson <robertcnelson@gmail.com>
-+ */
-+
-+/ {
-+	cpus {
-+		cpu@0 {
-+			cpu0-supply = <&dcdc2_reg>;
-+		};
-+	};
-+
-+	memory@80000000 {
-+		device_type = "memory";
-+		reg = <0x80000000 0x20000000>; /* 512 MB */
-+	};
-+};
-+
-+&cpu0_opp_table {
-+	/*
-+	* Octavo Systems:
-+	* The EFUSE_SMA register is not programmed for any of the AM335x wafers
-+	* we get and we are not programming them during our production test.
-+	* Therefore, from a DEVICE_ID revision point of view, the silicon looks
-+	* like it is Revision 2.1.  However, from an EFUSE_SMA point of view for
-+	* the HW OPP table, the silicon looks like it is Revision 1.0 (ie the
-+	* EFUSE_SMA register reads as all zeros).
-+	*/
-+	oppnitro-1000000000 {
-+		opp-supported-hw = <0x06 0x0100>;
-+	};
-+};
-+
-+&am33xx_pinmux {
-+	i2c0_pins: pinmux-i2c0-pins {
-+		pinctrl-single,pins = <
-+			AM33XX_IOPAD(0x988, PIN_INPUT_PULLUP | MUX_MODE0)	/* (C17) I2C0_SDA.I2C0_SDA */
-+			AM33XX_IOPAD(0x98c, PIN_INPUT_PULLUP | MUX_MODE0)	/* (C16) I2C0_SCL.I2C0_SCL */
-+		>;
-+	};
-+};
-+
-+&i2c0 {
-+	pinctrl-names = "default";
-+	pinctrl-0 = <&i2c0_pins>;
-+
-+	status = "okay";
-+	clock-frequency = <400000>;
-+
-+	tps: tps@24 {
-+		reg = <0x24>;
-+	};
-+};
-+
-+/include/ "tps65217.dtsi"
-+
-+&tps {
-+	interrupts = <7>; /* NMI */
-+	interrupt-parent = <&intc>;
-+
-+	ti,pmic-shutdown-controller;
-+
-+	pwrbutton {
-+		interrupts = <2>;
-+		status = "okay";
-+	};
-+
-+	regulators {
-+		dcdc1_reg: regulator@0 {
-+			regulator-name = "vdds_dpr";
-+			regulator-always-on;
-+		};
-+
-+		dcdc2_reg: regulator@1 {
-+			/* VDD_MPU voltage limits 0.95V - 1.26V with +/-4% tolerance */
-+			regulator-name = "vdd_mpu";
-+			regulator-min-microvolt = <925000>;
-+			regulator-max-microvolt = <1351500>;
-+			regulator-boot-on;
-+			regulator-always-on;
-+		};
-+
-+		dcdc3_reg: regulator@2 {
-+			/* VDD_CORE voltage limits 0.95V - 1.1V with +/-4% tolerance */
-+			regulator-name = "vdd_core";
-+			regulator-min-microvolt = <925000>;
-+			regulator-max-microvolt = <1150000>;
-+			regulator-boot-on;
-+			regulator-always-on;
-+		};
-+
-+		ldo1_reg: regulator@3 {
-+			regulator-name = "vio,vrtc,vdds";
-+			regulator-always-on;
-+		};
-+
-+		ldo2_reg: regulator@4 {
-+			regulator-name = "vdd_3v3aux";
-+			regulator-always-on;
-+		};
-+
-+		ldo3_reg: regulator@5 {
-+			regulator-name = "vdd_1v8";
-+			regulator-min-microvolt = <1800000>;
-+			regulator-max-microvolt = <1800000>;
-+			regulator-always-on;
-+		};
-+
-+		ldo4_reg: regulator@6 {
-+			regulator-name = "vdd_3v3a";
-+			regulator-always-on;
-+		};
-+	};
-+};
-+
-+&aes {
-+	status = "okay";
-+};
-+
-+&sham {
-+	status = "okay";
-+};
-diff --git a/arch/arm/boot/dts/am335x-pocketbeagle.dts b/arch/arm/boot/dts/am335x-pocketbeagle.dts
-new file mode 100644
-index 000000000000..62fe5cab9fae
---- /dev/null
-+++ b/arch/arm/boot/dts/am335x-pocketbeagle.dts
-@@ -0,0 +1,237 @@
-+// SPDX-License-Identifier: GPL-2.0
-+/*
-+ * Copyright (C) 2012 Texas Instruments Incorporated - http://www.ti.com/
-+ *
-+ * Author: Robert Nelson <robertcnelson@gmail.com>
-+ */
-+/dts-v1/;
-+
-+#include "am33xx.dtsi"
-+#include "am335x-osd335x-common.dtsi"
-+
-+/ {
-+	model = "TI AM335x PocketBeagle";
-+	compatible = "ti,am335x-pocketbeagle", "ti,am335x-bone", "ti,am33xx";
-+
-+	chosen {
-+		stdout-path = &uart0;
-+	};
-+
-+	leds {
-+		pinctrl-names = "default";
-+		pinctrl-0 = <&usr_leds_pins>;
-+
-+		compatible = "gpio-leds";
-+
-+		usr0 {
-+			label = "beaglebone:green:usr0";
-+			gpios = <&gpio1 21 GPIO_ACTIVE_HIGH>;
-+			linux,default-trigger = "heartbeat";
-+			default-state = "off";
-+		};
-+
-+		usr1 {
-+			label = "beaglebone:green:usr1";
-+			gpios = <&gpio1 22 GPIO_ACTIVE_HIGH>;
-+			linux,default-trigger = "mmc0";
-+			default-state = "off";
-+		};
-+
-+		usr2 {
-+			label = "beaglebone:green:usr2";
-+			gpios = <&gpio1 23 GPIO_ACTIVE_HIGH>;
-+			linux,default-trigger = "cpu0";
-+			default-state = "off";
-+		};
-+
-+		usr3 {
-+			label = "beaglebone:green:usr3";
-+			gpios = <&gpio1 24 GPIO_ACTIVE_HIGH>;
-+			default-state = "off";
-+		};
-+	};
-+
-+	vmmcsd_fixed: fixedregulator0 {
-+		compatible = "regulator-fixed";
-+		regulator-name = "vmmcsd_fixed";
-+		regulator-min-microvolt = <3300000>;
-+		regulator-max-microvolt = <3300000>;
-+	};
-+};
-+
-+&am33xx_pinmux {
-+	i2c2_pins: pinmux-i2c2-pins {
-+		pinctrl-single,pins = <
-+			AM33XX_IOPAD(0x97c, PIN_INPUT_PULLUP | MUX_MODE3)	/* (D17) uart1_rtsn.I2C2_SCL */
-+			AM33XX_IOPAD(0x978, PIN_INPUT_PULLUP | MUX_MODE3)	/* (D18) uart1_ctsn.I2C2_SDA */
-+		>;
-+	};
-+
-+	ehrpwm0_pins: pinmux-ehrpwm0-pins {
-+		pinctrl-single,pins = <
-+			AM33XX_IOPAD(0x990, PIN_OUTPUT_PULLDOWN | MUX_MODE1)	/* (A13) mcasp0_aclkx.ehrpwm0A */
-+		>;
-+	};
-+
-+	ehrpwm1_pins: pinmux-ehrpwm1-pins {
-+		pinctrl-single,pins = <
-+			AM33XX_IOPAD(0x848, PIN_OUTPUT_PULLDOWN | MUX_MODE6)	/* (U14) gpmc_a2.ehrpwm1A */
-+		>;
-+	};
-+
-+	mmc0_pins: pinmux-mmc0-pins {
-+		pinctrl-single,pins = <
-+			AM33XX_IOPAD(0x960, PIN_INPUT | MUX_MODE7)		/* (C15) spi0_cs1.gpio0[6] */
-+			AM33XX_IOPAD(0x8fc, PIN_INPUT_PULLUP | MUX_MODE0)	/* (G16) mmc0_dat0.mmc0_dat0 */
-+			AM33XX_IOPAD(0x8f8, PIN_INPUT_PULLUP | MUX_MODE0)	/* (G15) mmc0_dat1.mmc0_dat1 */
-+			AM33XX_IOPAD(0x8f4, PIN_INPUT_PULLUP | MUX_MODE0)	/* (F18) mmc0_dat2.mmc0_dat2 */
-+			AM33XX_IOPAD(0x8f0, PIN_INPUT_PULLUP | MUX_MODE0)	/* (F17) mmc0_dat3.mmc0_dat3 */
-+			AM33XX_IOPAD(0x904, PIN_INPUT_PULLUP | MUX_MODE0)	/* (G18) mmc0_cmd.mmc0_cmd */
-+			AM33XX_IOPAD(0x900, PIN_INPUT_PULLUP | MUX_MODE0)	/* (G17) mmc0_clk.mmc0_clk */
-+			AM33XX_IOPAD(0x9a0, PIN_INPUT | MUX_MODE4)		/* (B12) mcasp0_aclkr.mmc0_sdwp */
-+		>;
-+	};
-+
-+	spi0_pins: pinmux-spi0-pins {
-+		pinctrl-single,pins = <
-+			AM33XX_IOPAD(0x950, PIN_INPUT_PULLUP | MUX_MODE0)	/* (A17) spi0_sclk.spi0_sclk */
-+			AM33XX_IOPAD(0x954, PIN_INPUT_PULLUP | MUX_MODE0)	/* (B17) spi0_d0.spi0_d0 */
-+			AM33XX_IOPAD(0x958, PIN_INPUT_PULLUP | MUX_MODE0)	/* (B16) spi0_d1.spi0_d1 */
-+			AM33XX_IOPAD(0x95c, PIN_INPUT_PULLUP | MUX_MODE0)	/* (A16) spi0_cs0.spi0_cs0 */
-+		>;
-+	};
-+
-+	spi1_pins: pinmux-spi1-pins {
-+		pinctrl-single,pins = <
-+			AM33XX_IOPAD(0x964, PIN_INPUT_PULLUP | MUX_MODE4)	/* (C18) eCAP0_in_PWM0_out.spi1_sclk */
-+			AM33XX_IOPAD(0x968, PIN_INPUT_PULLUP | MUX_MODE4)	/* (E18) uart0_ctsn.spi1_d0 */
-+			AM33XX_IOPAD(0x96c, PIN_INPUT_PULLUP | MUX_MODE4)	/* (E17) uart0_rtsn.spi1_d1 */
-+			AM33XX_IOPAD(0x9b0, PIN_INPUT_PULLUP | MUX_MODE4)	/* (A15) xdma_event_intr0.spi1_cs1 */
-+		>;
-+	};
-+
-+	usr_leds_pins: pinmux-usr-leds-pins {
-+		pinctrl-single,pins = <
-+			AM33XX_IOPAD(0x854, PIN_OUTPUT | MUX_MODE7)		/* (V15) gpmc_a5.gpio1[21] - USR_LED_0 */
-+			AM33XX_IOPAD(0x858, PIN_OUTPUT | MUX_MODE7)		/* (U15) gpmc_a6.gpio1[22] - USR_LED_1 */
-+			AM33XX_IOPAD(0x85c, PIN_OUTPUT | MUX_MODE7)		/* (T15) gpmc_a7.gpio1[23] - USR_LED_2 */
-+			AM33XX_IOPAD(0x860, PIN_OUTPUT | MUX_MODE7)		/* (V16) gpmc_a8.gpio1[24] - USR_LED_3 */
-+		>;
-+	};
-+
-+	uart0_pins: pinmux-uart0-pins {
-+		pinctrl-single,pins = <
-+			AM33XX_IOPAD(0x970, PIN_INPUT_PULLUP | MUX_MODE0)	/* (E15) uart0_rxd.uart0_rxd */
-+			AM33XX_IOPAD(0x974, PIN_OUTPUT_PULLDOWN | MUX_MODE0)	/* (E16) uart0_txd.uart0_txd */
-+		>;
-+	};
-+
-+	uart4_pins: pinmux-uart4-pins {
-+		pinctrl-single,pins = <
-+			AM33XX_IOPAD(0x870, PIN_INPUT_PULLUP | MUX_MODE6)	/* (T17) gpmc_wait0.uart4_rxd */
-+			AM33XX_IOPAD(0x874, PIN_OUTPUT_PULLDOWN | MUX_MODE6)	/* (U17) gpmc_wpn.uart4_txd */
-+		>;
-+	};
-+};
-+
-+&epwmss0 {
-+	status = "okay";
-+};
-+
-+&ehrpwm0 {
-+	status = "okay";
-+	pinctrl-names = "default";
-+	pinctrl-0 = <&ehrpwm0_pins>;
-+};
-+
-+&epwmss1 {
-+	status = "okay";
-+};
-+
-+&ehrpwm1 {
-+	status = "okay";
-+	pinctrl-names = "default";
-+	pinctrl-0 = <&ehrpwm1_pins>;
-+};
-+
-+&i2c0 {
-+	eeprom: eeprom@50 {
-+		compatible = "atmel,24c256";
-+		reg = <0x50>;
-+	};
-+};
-+
-+&i2c2 {
-+	pinctrl-names = "default";
-+	pinctrl-0 = <&i2c2_pins>;
-+
-+	status = "okay";
-+	clock-frequency = <400000>;
-+};
-+
-+&mmc1 {
-+	status = "okay";
-+	vmmc-supply = <&vmmcsd_fixed>;
-+	bus-width = <4>;
-+	pinctrl-names = "default";
-+	pinctrl-0 = <&mmc0_pins>;
-+	cd-gpios = <&gpio0 6 GPIO_ACTIVE_LOW>;
-+};
-+
-+&rtc {
-+	system-power-controller;
-+};
-+
-+&tscadc {
-+	status = "okay";
-+	adc {
-+		ti,adc-channels = <0 1 2 3 4 5 6 7>;
-+		ti,chan-step-avg = <16 16 16 16 16 16 16 16>;
-+		ti,chan-step-opendelay = <0x98 0x98 0x98 0x98 0x98 0x98 0x98 0x98>;
-+		ti,chan-step-sampledelay = <0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0>;
-+	};
-+};
-+
-+&uart0 {
-+	pinctrl-names = "default";
-+	pinctrl-0 = <&uart0_pins>;
-+
-+	status = "okay";
-+};
-+
-+&uart4 {
-+	pinctrl-names = "default";
-+	pinctrl-0 = <&uart4_pins>;
-+
-+	status = "okay";
-+};
-+
-+&usb {
-+	status = "okay";
-+};
-+
-+&usb_ctrl_mod {
-+	status = "okay";
-+};
-+
-+&usb0_phy {
-+	status = "okay";
-+};
-+
-+&usb0 {
-+	status = "okay";
-+	dr_mode = "otg";
-+};
-+
-+&usb1_phy {
-+	status = "okay";
-+};
-+
-+&usb1 {
-+	status = "okay";
-+	dr_mode = "host";
-+};
-+
-+&cppi41dma  {
-+	status = "okay";
-+};
diff --git a/bcm2837-rpi-initial-3plus-support.patch b/bcm2837-rpi-initial-3plus-support.patch
deleted file mode 100644
index e69303ada..000000000
--- a/bcm2837-rpi-initial-3plus-support.patch
+++ /dev/null
@@ -1,560 +0,0 @@
-From patchwork Sat Apr 21 11:28:34 2018
-Content-Type: text/plain; charset="utf-8"
-MIME-Version: 1.0
-Content-Transfer-Encoding: 7bit
-Subject: [V2,1/9] ARM: dts: bcm283x: Fix PWM pin assignment
-From: Stefan Wahren <stefan.wahren@i2se.com>
-X-Patchwork-Id: 10354085
-Message-Id: <1524310122-9439-2-git-send-email-stefan.wahren@i2se.com>
-To: Rob Herring <robh+dt@kernel.org>, Mark Rutland <mark.rutland@arm.com>,
- Eric Anholt <eric@anholt.net>, Catalin Marinas <catalin.marinas@arm.com>, 
- Will Deacon <will.deacon@arm.com>
-Cc: Stefan Wahren <stefan.wahren@i2se.com>, devicetree@vger.kernel.org,
- Florian Fainelli <f.fainelli@gmail.com>, Arnd Bergmann <arnd@arndb.de>,
- Scott Branden <sbranden@broadcom.com>, Ray Jui <rjui@broadcom.com>,
- Phil Elwell <phil@raspberrypi.org>, Alexander Graf <agraf@suse.de>,
- bcm-kernel-feedback-list@broadcom.com,
- linux-rpi-kernel@lists.infradead.org, linux-arm-kernel@lists.infradead.org
-Date: Sat, 21 Apr 2018 13:28:34 +0200
-
-All RPi 1 and 2 boards used the PWM (audio out) on pin 40 and 45.
-So it was easy to define them in bcm2835-rpi.dtsi. Starting with RPi 3
-this wont work anymore, because it uses pin 40 and 41. Furthermore the
-Zero variants doesn't have audio out.
-
-This patch fixes this pin conflict by moving the PWM node to the board-level.
-
-Change summary:
-RPi 3 B:      PWM1 45 -> 41
-Zero, Zero W: PWM disabled
-all other:    no functional change
-
-Reported-by: Baruch Siach <baruch@tkos.co.il>
-Signed-off-by: Stefan Wahren <stefan.wahren@i2se.com>
-Reviewed-by: Eric Anholt <eric@anholt.net>
----
- arch/arm/boot/dts/bcm2835-rpi-a-plus.dts | 6 ++++++
- arch/arm/boot/dts/bcm2835-rpi-a.dts      | 6 ++++++
- arch/arm/boot/dts/bcm2835-rpi-b-plus.dts | 6 ++++++
- arch/arm/boot/dts/bcm2835-rpi-b-rev2.dts | 6 ++++++
- arch/arm/boot/dts/bcm2835-rpi-b.dts      | 6 ++++++
- arch/arm/boot/dts/bcm2835-rpi.dtsi       | 6 ------
- arch/arm/boot/dts/bcm2836-rpi-2-b.dts    | 6 ++++++
- arch/arm/boot/dts/bcm2837-rpi-3-b.dts    | 6 ++++++
- 8 files changed, 42 insertions(+), 6 deletions(-)
-
-diff --git a/arch/arm/boot/dts/bcm2835-rpi-a-plus.dts b/arch/arm/boot/dts/bcm2835-rpi-a-plus.dts
-index aa1fc7b..2cd9c5e 100644
---- a/arch/arm/boot/dts/bcm2835-rpi-a-plus.dts
-+++ b/arch/arm/boot/dts/bcm2835-rpi-a-plus.dts
-@@ -101,6 +101,12 @@
- 	hpd-gpios = <&gpio 46 GPIO_ACTIVE_LOW>;
- };
- 
-+&pwm {
-+	pinctrl-names = "default";
-+	pinctrl-0 = <&pwm0_gpio40 &pwm1_gpio45>;
-+	status = "okay";
-+};
-+
- &uart0 {
- 	pinctrl-names = "default";
- 	pinctrl-0 = <&uart0_gpio14>;
-diff --git a/arch/arm/boot/dts/bcm2835-rpi-a.dts b/arch/arm/boot/dts/bcm2835-rpi-a.dts
-index 425f6b0..067d1f0 100644
---- a/arch/arm/boot/dts/bcm2835-rpi-a.dts
-+++ b/arch/arm/boot/dts/bcm2835-rpi-a.dts
-@@ -96,6 +96,12 @@
- 	hpd-gpios = <&gpio 46 GPIO_ACTIVE_HIGH>;
- };
- 
-+&pwm {
-+	pinctrl-names = "default";
-+	pinctrl-0 = <&pwm0_gpio40 &pwm1_gpio45>;
-+	status = "okay";
-+};
-+
- &uart0 {
- 	pinctrl-names = "default";
- 	pinctrl-0 = <&uart0_gpio14>;
-diff --git a/arch/arm/boot/dts/bcm2835-rpi-b-plus.dts b/arch/arm/boot/dts/bcm2835-rpi-b-plus.dts
-index effa195..cfbdaac 100644
---- a/arch/arm/boot/dts/bcm2835-rpi-b-plus.dts
-+++ b/arch/arm/boot/dts/bcm2835-rpi-b-plus.dts
-@@ -103,6 +103,12 @@
- 	hpd-gpios = <&gpio 46 GPIO_ACTIVE_LOW>;
- };
- 
-+&pwm {
-+	pinctrl-names = "default";
-+	pinctrl-0 = <&pwm0_gpio40 &pwm1_gpio45>;
-+	status = "okay";
-+};
-+
- &uart0 {
- 	pinctrl-names = "default";
- 	pinctrl-0 = <&uart0_gpio14>;
-diff --git a/arch/arm/boot/dts/bcm2835-rpi-b-rev2.dts b/arch/arm/boot/dts/bcm2835-rpi-b-rev2.dts
-index 772ec3b..5641d16 100644
---- a/arch/arm/boot/dts/bcm2835-rpi-b-rev2.dts
-+++ b/arch/arm/boot/dts/bcm2835-rpi-b-rev2.dts
-@@ -96,6 +96,12 @@
- 	hpd-gpios = <&gpio 46 GPIO_ACTIVE_LOW>;
- };
- 
-+&pwm {
-+	pinctrl-names = "default";
-+	pinctrl-0 = <&pwm0_gpio40 &pwm1_gpio45>;
-+	status = "okay";
-+};
-+
- &uart0 {
- 	pinctrl-names = "default";
- 	pinctrl-0 = <&uart0_gpio14>;
-diff --git a/arch/arm/boot/dts/bcm2835-rpi-b.dts b/arch/arm/boot/dts/bcm2835-rpi-b.dts
-index 434483d..31ff602 100644
---- a/arch/arm/boot/dts/bcm2835-rpi-b.dts
-+++ b/arch/arm/boot/dts/bcm2835-rpi-b.dts
-@@ -91,6 +91,12 @@
- 	hpd-gpios = <&gpio 46 GPIO_ACTIVE_HIGH>;
- };
- 
-+&pwm {
-+	pinctrl-names = "default";
-+	pinctrl-0 = <&pwm0_gpio40 &pwm1_gpio45>;
-+	status = "okay";
-+};
-+
- &uart0 {
- 	pinctrl-names = "default";
- 	pinctrl-0 = <&uart0_gpio14>;
-diff --git a/arch/arm/boot/dts/bcm2835-rpi.dtsi b/arch/arm/boot/dts/bcm2835-rpi.dtsi
-index 6c3cfaa..cb2d6d7 100644
---- a/arch/arm/boot/dts/bcm2835-rpi.dtsi
-+++ b/arch/arm/boot/dts/bcm2835-rpi.dtsi
-@@ -83,12 +83,6 @@
- 	bus-width = <4>;
- };
- 
--&pwm {
--	pinctrl-names = "default";
--	pinctrl-0 = <&pwm0_gpio40 &pwm1_gpio45>;
--	status = "okay";
--};
--
- &usb {
- 	power-domains = <&power RPI_POWER_DOMAIN_USB>;
- };
-diff --git a/arch/arm/boot/dts/bcm2836-rpi-2-b.dts b/arch/arm/boot/dts/bcm2836-rpi-2-b.dts
-index 5c339ad..2fef70a 100644
---- a/arch/arm/boot/dts/bcm2836-rpi-2-b.dts
-+++ b/arch/arm/boot/dts/bcm2836-rpi-2-b.dts
-@@ -41,6 +41,12 @@
- 	hpd-gpios = <&gpio 46 GPIO_ACTIVE_LOW>;
- };
- 
-+&pwm {
-+	pinctrl-names = "default";
-+	pinctrl-0 = <&pwm0_gpio40 &pwm1_gpio45>;
-+	status = "okay";
-+};
-+
- &uart0 {
- 	pinctrl-names = "default";
- 	pinctrl-0 = <&uart0_gpio14>;
-diff --git a/arch/arm/boot/dts/bcm2837-rpi-3-b.dts b/arch/arm/boot/dts/bcm2837-rpi-3-b.dts
-index 0b31d99..cc39b6f 100644
---- a/arch/arm/boot/dts/bcm2837-rpi-3-b.dts
-+++ b/arch/arm/boot/dts/bcm2837-rpi-3-b.dts
-@@ -42,6 +42,12 @@
- 	};
- };
- 
-+&pwm {
-+	pinctrl-names = "default";
-+	pinctrl-0 = <&pwm0_gpio40 &pwm1_gpio41>;
-+	status = "okay";
-+};
-+
- /* uart0 communicates with the BT module */
- &uart0 {
- 	pinctrl-names = "default";
-From patchwork Sat Apr 21 11:28:35 2018
-Content-Type: text/plain; charset="utf-8"
-MIME-Version: 1.0
-Content-Transfer-Encoding: 7bit
-Subject: [V2,2/9] ARM: dts: bcm2837: Add missing GPIOs of Expander
-From: Stefan Wahren <stefan.wahren@i2se.com>
-X-Patchwork-Id: 10354079
-Message-Id: <1524310122-9439-3-git-send-email-stefan.wahren@i2se.com>
-To: Rob Herring <robh+dt@kernel.org>, Mark Rutland <mark.rutland@arm.com>,
- Eric Anholt <eric@anholt.net>, Catalin Marinas <catalin.marinas@arm.com>, 
- Will Deacon <will.deacon@arm.com>
-Cc: Stefan Wahren <stefan.wahren@i2se.com>, devicetree@vger.kernel.org,
- Florian Fainelli <f.fainelli@gmail.com>, Arnd Bergmann <arnd@arndb.de>,
- Scott Branden <sbranden@broadcom.com>, Ray Jui <rjui@broadcom.com>,
- Phil Elwell <phil@raspberrypi.org>, Alexander Graf <agraf@suse.de>,
- bcm-kernel-feedback-list@broadcom.com,
- linux-rpi-kernel@lists.infradead.org, linux-arm-kernel@lists.infradead.org
-Date: Sat, 21 Apr 2018 13:28:35 +0200
-
-After commit a98d90e7d588 ("gpio: raspberrypi-exp: Driver for RPi3 GPIO
-expander via mailbox service") we are able to control the rest of the
-GPIOs of the RPi 3. So add all the missing parts (ACT LED,
-Wifi & BT control, HDMI detect) to the DT.
-
-Signed-off-by: Stefan Wahren <stefan.wahren@i2se.com>
-Reviewed-by: Eric Anholt <eric@anholt.net>
----
- arch/arm/boot/dts/bcm2837-rpi-3-b.dts | 20 +++++++++++++++++++-
- 1 file changed, 19 insertions(+), 1 deletion(-)
-
-diff --git a/arch/arm/boot/dts/bcm2837-rpi-3-b.dts b/arch/arm/boot/dts/bcm2837-rpi-3-b.dts
-index cc39b6f..c318bcb 100644
---- a/arch/arm/boot/dts/bcm2837-rpi-3-b.dts
-+++ b/arch/arm/boot/dts/bcm2837-rpi-3-b.dts
-@@ -20,9 +20,14 @@
- 
- 	leds {
- 		act {
--			gpios = <&gpio 47 GPIO_ACTIVE_HIGH>;
-+			gpios = <&expgpio 2 GPIO_ACTIVE_HIGH>;
- 		};
- 	};
-+
-+	wifi_pwrseq: wifi-pwrseq {
-+		compatible = "mmc-pwrseq-simple";
-+		reset-gpios = <&expgpio 1 GPIO_ACTIVE_HIGH>;
-+	};
- };
- 
- &firmware {
-@@ -48,6 +53,10 @@
- 	status = "okay";
- };
- 
-+&hdmi {
-+	hpd-gpios = <&expgpio 4 GPIO_ACTIVE_LOW>;
-+};
-+
- /* uart0 communicates with the BT module */
- &uart0 {
- 	pinctrl-names = "default";
-@@ -57,6 +66,7 @@
- 	bluetooth {
- 		compatible = "brcm,bcm43438-bt";
- 		max-speed = <2000000>;
-+		shutdown-gpios = <&expgpio 0 GPIO_ACTIVE_HIGH>;
- 	};
- };
- 
-@@ -69,11 +79,19 @@
- 
- /* SDHCI is used to control the SDIO for wireless */
- &sdhci {
-+	#address-cells = <1>;
-+	#size-cells = <0>;
- 	pinctrl-names = "default";
- 	pinctrl-0 = <&emmc_gpio34>;
- 	status = "okay";
- 	bus-width = <4>;
- 	non-removable;
-+	mmc-pwrseq = <&wifi_pwrseq>;
-+
-+	brcmf: wifi@1 {
-+		reg = <1>;
-+		compatible = "brcm,bcm4329-fmac";
-+	};
- };
- 
- /* SDHOST is used to drive the SD card */
-From patchwork Sat Apr 21 11:28:36 2018
-Content-Type: text/plain; charset="utf-8"
-MIME-Version: 1.0
-Content-Transfer-Encoding: 7bit
-Subject: [V2,3/9] dt-bindings: bcm: Add Raspberry Pi 3 B+
-From: Stefan Wahren <stefan.wahren@i2se.com>
-X-Patchwork-Id: 10354081
-Message-Id: <1524310122-9439-4-git-send-email-stefan.wahren@i2se.com>
-To: Rob Herring <robh+dt@kernel.org>, Mark Rutland <mark.rutland@arm.com>,
- Eric Anholt <eric@anholt.net>, Catalin Marinas <catalin.marinas@arm.com>, 
- Will Deacon <will.deacon@arm.com>
-Cc: Stefan Wahren <stefan.wahren@i2se.com>, devicetree@vger.kernel.org,
- Florian Fainelli <f.fainelli@gmail.com>, Arnd Bergmann <arnd@arndb.de>,
- Scott Branden <sbranden@broadcom.com>, Ray Jui <rjui@broadcom.com>,
- Phil Elwell <phil@raspberrypi.org>, Alexander Graf <agraf@suse.de>,
- bcm-kernel-feedback-list@broadcom.com,
- linux-rpi-kernel@lists.infradead.org, linux-arm-kernel@lists.infradead.org
-Date: Sat, 21 Apr 2018 13:28:36 +0200
-
-This adds the root properties for the Raspberry Pi 3 B+
-
-Signed-off-by: Stefan Wahren <stefan.wahren@i2se.com>
-Reviewed-by: Eric Anholt <eric@anholt.net>
-Reviewed-by: Rob Herring <robh@kernel.org>
----
- Documentation/devicetree/bindings/arm/bcm/brcm,bcm2835.txt | 4 ++++
- 1 file changed, 4 insertions(+)
-
-diff --git a/Documentation/devicetree/bindings/arm/bcm/brcm,bcm2835.txt b/Documentation/devicetree/bindings/arm/bcm/brcm,bcm2835.txt
-index 3e3efa0..1e3e29a 100644
---- a/Documentation/devicetree/bindings/arm/bcm/brcm,bcm2835.txt
-+++ b/Documentation/devicetree/bindings/arm/bcm/brcm,bcm2835.txt
-@@ -34,6 +34,10 @@ Raspberry Pi 3 Model B
- Required root node properties:
- compatible = "raspberrypi,3-model-b", "brcm,bcm2837";
- 
-+Raspberry Pi 3 Model B+
-+Required root node properties:
-+compatible = "raspberrypi,3-model-b-plus", "brcm,bcm2837";
-+
- Raspberry Pi Compute Module
- Required root node properties:
- compatible = "raspberrypi,compute-module", "brcm,bcm2835";
-From patchwork Sat Apr 21 11:28:37 2018
-Content-Type: text/plain; charset="utf-8"
-MIME-Version: 1.0
-Content-Transfer-Encoding: 7bit
-Subject: [V2,4/9] ARM: dts: bcm2837: Add Raspberry Pi 3 B+
-From: Stefan Wahren <stefan.wahren@i2se.com>
-X-Patchwork-Id: 10354075
-Message-Id: <1524310122-9439-5-git-send-email-stefan.wahren@i2se.com>
-To: Rob Herring <robh+dt@kernel.org>, Mark Rutland <mark.rutland@arm.com>,
- Eric Anholt <eric@anholt.net>, Catalin Marinas <catalin.marinas@arm.com>, 
- Will Deacon <will.deacon@arm.com>
-Cc: Stefan Wahren <stefan.wahren@i2se.com>, devicetree@vger.kernel.org,
- Florian Fainelli <f.fainelli@gmail.com>, Arnd Bergmann <arnd@arndb.de>,
- Scott Branden <sbranden@broadcom.com>, Ray Jui <rjui@broadcom.com>,
- Phil Elwell <phil@raspberrypi.org>, Alexander Graf <agraf@suse.de>,
- bcm-kernel-feedback-list@broadcom.com,
- linux-rpi-kernel@lists.infradead.org, linux-arm-kernel@lists.infradead.org
-Date: Sat, 21 Apr 2018 13:28:37 +0200
-
-The Raspberry Pi 3 B+ has the following major differences compared
-to the model 3 B:
-* Microchip LAN7515 (Gigabit Ethernet with integrated USB 2.0 HUB)
-* Cypress CYW43455 (802.11n/ac and BT 4.2)
-
-We need to add the USB LAN chip so the bootloader can add the MAC address.
-This is necessary because there ain't an EEPROM or a valid OTP.
-
-Signed-off-by: Phil Elwell <phil@raspberrypi.org>
-Signed-off-by: Stefan Wahren <stefan.wahren@i2se.com>
-Reviewed-by: Eric Anholt <eric@anholt.net>
----
- arch/arm/boot/dts/Makefile                 |   1 +
- arch/arm/boot/dts/bcm2837-rpi-3-b-plus.dts | 108 +++++++++++++++++++++++++++++
- arch/arm/boot/dts/bcm283x-rpi-lan7515.dtsi |  27 ++++++++
- 3 files changed, 136 insertions(+)
- create mode 100644 arch/arm/boot/dts/bcm2837-rpi-3-b-plus.dts
- create mode 100644 arch/arm/boot/dts/bcm283x-rpi-lan7515.dtsi
-
-diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
-index 7e24249..a300a35 100644
---- a/arch/arm/boot/dts/Makefile
-+++ b/arch/arm/boot/dts/Makefile
-@@ -75,6 +75,7 @@ dtb-$(CONFIG_ARCH_BCM2835) += \
- 	bcm2835-rpi-a-plus.dtb \
- 	bcm2836-rpi-2-b.dtb \
- 	bcm2837-rpi-3-b.dtb \
-+	bcm2837-rpi-3-b-plus.dtb \
- 	bcm2835-rpi-zero.dtb \
- 	bcm2835-rpi-zero-w.dtb
- dtb-$(CONFIG_ARCH_BCM_5301X) += \
-diff --git a/arch/arm/boot/dts/bcm2837-rpi-3-b-plus.dts b/arch/arm/boot/dts/bcm2837-rpi-3-b-plus.dts
-new file mode 100644
-index 0000000..4adb85e
---- /dev/null
-+++ b/arch/arm/boot/dts/bcm2837-rpi-3-b-plus.dts
-@@ -0,0 +1,108 @@
-+// SPDX-License-Identifier: GPL-2.0
-+/dts-v1/;
-+#include "bcm2837.dtsi"
-+#include "bcm2835-rpi.dtsi"
-+#include "bcm283x-rpi-lan7515.dtsi"
-+#include "bcm283x-rpi-usb-host.dtsi"
-+
-+/ {
-+	compatible = "raspberrypi,3-model-b-plus", "brcm,bcm2837";
-+	model = "Raspberry Pi 3 Model B+";
-+
-+	chosen {
-+		/* 8250 auxiliary UART instead of pl011 */
-+		stdout-path = "serial1:115200n8";
-+	};
-+
-+	memory {
-+		reg = <0 0x40000000>;
-+	};
-+
-+	leds {
-+		act {
-+			gpios = <&gpio 29 GPIO_ACTIVE_HIGH>;
-+		};
-+
-+		pwr {
-+			label = "PWR";
-+			gpios = <&expgpio 2 GPIO_ACTIVE_LOW>;
-+		};
-+	};
-+
-+	wifi_pwrseq: wifi-pwrseq {
-+		compatible = "mmc-pwrseq-simple";
-+		reset-gpios = <&expgpio 1 GPIO_ACTIVE_HIGH>;
-+	};
-+};
-+
-+&firmware {
-+	expgpio: gpio {
-+		compatible = "raspberrypi,firmware-gpio";
-+		gpio-controller;
-+		#gpio-cells = <2>;
-+		gpio-line-names = "BT_ON",
-+				  "WL_ON",
-+				  "STATUS_LED",
-+				  "LAN_RUN",
-+				  "",
-+				  "CAM_GPIO0",
-+				  "CAM_GPIO1",
-+				  "";
-+		status = "okay";
-+	};
-+};
-+
-+&hdmi {
-+	hpd-gpios = <&gpio 28 GPIO_ACTIVE_LOW>;
-+};
-+
-+&pwm {
-+	pinctrl-names = "default";
-+	pinctrl-0 = <&pwm0_gpio40 &pwm1_gpio41>;
-+	status = "okay";
-+};
-+
-+/* SDHCI is used to control the SDIO for wireless */
-+&sdhci {
-+	#address-cells = <1>;
-+	#size-cells = <0>;
-+	pinctrl-names = "default";
-+	pinctrl-0 = <&emmc_gpio34>;
-+	status = "okay";
-+	bus-width = <4>;
-+	non-removable;
-+	mmc-pwrseq = <&wifi_pwrseq>;
-+
-+	brcmf: wifi@1 {
-+		reg = <1>;
-+		compatible = "brcm,bcm4329-fmac";
-+	};
-+};
-+
-+/* SDHOST is used to drive the SD card */
-+&sdhost {
-+	pinctrl-names = "default";
-+	pinctrl-0 = <&sdhost_gpio48>;
-+	status = "okay";
-+	bus-width = <4>;
-+};
-+
-+/* uart0 communicates with the BT module */
-+&uart0 {
-+	pinctrl-names = "default";
-+	pinctrl-0 = <&uart0_ctsrts_gpio30 &uart0_gpio32 &gpclk2_gpio43>;
-+	status = "okay";
-+
-+	bluetooth {
-+		compatible = "brcm,bcm43438-bt";
-+		max-speed = <2000000>;
-+		shutdown-gpios = <&expgpio 0 GPIO_ACTIVE_HIGH>;
-+	};
-+};
-+
-+/* uart1 is mapped to the pin header */
-+&uart1 {
-+	pinctrl-names = "default";
-+	pinctrl-0 = <&uart1_gpio14>;
-+	status = "okay";
-+};
-diff --git a/arch/arm/boot/dts/bcm283x-rpi-lan7515.dtsi b/arch/arm/boot/dts/bcm283x-rpi-lan7515.dtsi
-new file mode 100644
-index 0000000..9403da0
---- /dev/null
-+++ b/arch/arm/boot/dts/bcm283x-rpi-lan7515.dtsi
-@@ -0,0 +1,27 @@
-+// SPDX-License-Identifier: GPL-2.0
-+/ {
-+	aliases {
-+		ethernet0 = &ethernet;
-+	};
-+};
-+
-+&usb {
-+	usb-port@1 {
-+		compatible = "usb424,2514";
-+		reg = <1>;
-+		#address-cells = <1>;
-+		#size-cells = <0>;
-+
-+		usb-port@1 {
-+			compatible = "usb424,2514";
-+			reg = <1>;
-+			#address-cells = <1>;
-+			#size-cells = <0>;
-+
-+			ethernet: ethernet@1 {
-+				compatible = "usb424,7800";
-+				reg = <1>;
-+			};
-+		};
-+	};
-+};
-From patchwork Sat Apr 21 11:28:42 2018
-Content-Type: text/plain; charset="utf-8"
-MIME-Version: 1.0
-Content-Transfer-Encoding: 7bit
-Subject: [V2,9/9] arm64: dts: broadcom: Add reference to Raspberry Pi 3 B+
-From: Stefan Wahren <stefan.wahren@i2se.com>
-X-Patchwork-Id: 10354077
-Message-Id: <1524310122-9439-10-git-send-email-stefan.wahren@i2se.com>
-To: Rob Herring <robh+dt@kernel.org>, Mark Rutland <mark.rutland@arm.com>,
- Eric Anholt <eric@anholt.net>, Catalin Marinas <catalin.marinas@arm.com>, 
- Will Deacon <will.deacon@arm.com>
-Cc: Stefan Wahren <stefan.wahren@i2se.com>, devicetree@vger.kernel.org,
- Florian Fainelli <f.fainelli@gmail.com>, Arnd Bergmann <arnd@arndb.de>,
- Scott Branden <sbranden@broadcom.com>, Ray Jui <rjui@broadcom.com>,
- Phil Elwell <phil@raspberrypi.org>, Alexander Graf <agraf@suse.de>,
- bcm-kernel-feedback-list@broadcom.com,
- linux-rpi-kernel@lists.infradead.org, linux-arm-kernel@lists.infradead.org
-Date: Sat, 21 Apr 2018 13:28:42 +0200
-
-This adds a reference to the dts of the Raspberry Pi 3 B+
-in arm, so don't need to maintain the content in arm64.
-
-Signed-off-by: Stefan Wahren <stefan.wahren@i2se.com>
-Reviewed-by: Eric Anholt <eric@anholt.net>
----
- arch/arm64/boot/dts/broadcom/Makefile                 | 3 ++-
- arch/arm64/boot/dts/broadcom/bcm2837-rpi-3-b-plus.dts | 2 ++
- 2 files changed, 4 insertions(+), 1 deletion(-)
- create mode 100644 arch/arm64/boot/dts/broadcom/bcm2837-rpi-3-b-plus.dts
-
-diff --git a/arch/arm64/boot/dts/broadcom/Makefile b/arch/arm64/boot/dts/broadcom/Makefile
-index 2a2591e..1193a9e 100644
---- a/arch/arm64/boot/dts/broadcom/Makefile
-+++ b/arch/arm64/boot/dts/broadcom/Makefile
-@@ -1,5 +1,6 @@
- # SPDX-License-Identifier: GPL-2.0
--dtb-$(CONFIG_ARCH_BCM2835) += bcm2837-rpi-3-b.dtb
-+dtb-$(CONFIG_ARCH_BCM2835) += bcm2837-rpi-3-b.dtb \
-+			      bcm2837-rpi-3-b-plus.dtb
- 
- subdir-y	+= northstar2
- subdir-y	+= stingray
-diff --git a/arch/arm64/boot/dts/broadcom/bcm2837-rpi-3-b-plus.dts b/arch/arm64/boot/dts/broadcom/bcm2837-rpi-3-b-plus.dts
-new file mode 100644
-index 0000000..46ad202
---- /dev/null
-+++ b/arch/arm64/boot/dts/broadcom/bcm2837-rpi-3-b-plus.dts
-@@ -0,0 +1,2 @@
-+// SPDX-License-Identifier: GPL-2.0
-+#include "arm/bcm2837-rpi-3-b-plus.dts"
diff --git a/configs/fedora/generic/CONFIG_QCOM_COMMAND_DB b/configs/fedora/generic/CONFIG_QCOM_COMMAND_DB
new file mode 100644
index 000000000..50311c7b5
--- /dev/null
+++ b/configs/fedora/generic/CONFIG_QCOM_COMMAND_DB
@@ -0,0 +1 @@
+# CONFIG_QCOM_COMMAND_DB is not set
diff --git a/configs/fedora/generic/CONFIG_QCOM_GENI_SE b/configs/fedora/generic/CONFIG_QCOM_GENI_SE
new file mode 100644
index 000000000..ac6e62679
--- /dev/null
+++ b/configs/fedora/generic/CONFIG_QCOM_GENI_SE
@@ -0,0 +1 @@
+# CONFIG_QCOM_GENI_SE is not set
diff --git a/gitrev b/gitrev
index 1d05b8e9a..8f79e552a 100644
--- a/gitrev
+++ b/gitrev
@@ -1 +1 @@
-a2225d931f75ddd3c39f4d0d195fad99dfd68671
+8efcf34a263965e471e3999904f94d1f6799d42a
diff --git a/kernel-aarch64-debug.config b/kernel-aarch64-debug.config
index 37252dd89..ffbd66421 100644
--- a/kernel-aarch64-debug.config
+++ b/kernel-aarch64-debug.config
@@ -4563,11 +4563,13 @@ CONFIG_QCOM_CLK_APCS_MSM8916=m
 CONFIG_QCOM_CLK_RPM=m
 CONFIG_QCOM_CLK_SMD_RPM=m
 CONFIG_QCOM_COINCELL=m
+# CONFIG_QCOM_COMMAND_DB is not set
 # CONFIG_QCOM_EBI2 is not set
 CONFIG_QCOM_EMAC=m
 # CONFIG_QCOM_FALKOR_ERRATUM_1003 is not set
 CONFIG_QCOM_FALKOR_ERRATUM_1009=y
 CONFIG_QCOM_FALKOR_ERRATUM_E1041=y
+# CONFIG_QCOM_GENI_SE is not set
 # CONFIG_QCOM_GLINK_SSR is not set
 CONFIG_QCOM_GSBI=y
 CONFIG_QCOM_HIDMA=m
diff --git a/kernel-aarch64.config b/kernel-aarch64.config
index 3d90d9ea7..25c8d1649 100644
--- a/kernel-aarch64.config
+++ b/kernel-aarch64.config
@@ -4540,11 +4540,13 @@ CONFIG_QCOM_CLK_APCS_MSM8916=m
 CONFIG_QCOM_CLK_RPM=m
 CONFIG_QCOM_CLK_SMD_RPM=m
 CONFIG_QCOM_COINCELL=m
+# CONFIG_QCOM_COMMAND_DB is not set
 # CONFIG_QCOM_EBI2 is not set
 CONFIG_QCOM_EMAC=m
 # CONFIG_QCOM_FALKOR_ERRATUM_1003 is not set
 CONFIG_QCOM_FALKOR_ERRATUM_1009=y
 CONFIG_QCOM_FALKOR_ERRATUM_E1041=y
+# CONFIG_QCOM_GENI_SE is not set
 # CONFIG_QCOM_GLINK_SSR is not set
 CONFIG_QCOM_GSBI=y
 CONFIG_QCOM_HIDMA=m
diff --git a/kernel-armv7hl-debug.config b/kernel-armv7hl-debug.config
index a9c859299..f34e9c1e5 100644
--- a/kernel-armv7hl-debug.config
+++ b/kernel-armv7hl-debug.config
@@ -4851,8 +4851,10 @@ CONFIG_QCOM_CLK_APCS_MSM8916=m
 CONFIG_QCOM_CLK_RPM=m
 CONFIG_QCOM_CLK_SMD_RPM=m
 CONFIG_QCOM_COINCELL=m
+# CONFIG_QCOM_COMMAND_DB is not set
 # CONFIG_QCOM_EBI2 is not set
 # CONFIG_QCOM_EMAC is not set
+# CONFIG_QCOM_GENI_SE is not set
 # CONFIG_QCOM_GLINK_SSR is not set
 CONFIG_QCOM_GSBI=m
 # CONFIG_QCOM_HIDMA is not set
diff --git a/kernel-armv7hl-lpae-debug.config b/kernel-armv7hl-lpae-debug.config
index 7117843fa..c81fc9623 100644
--- a/kernel-armv7hl-lpae-debug.config
+++ b/kernel-armv7hl-lpae-debug.config
@@ -4592,8 +4592,10 @@ CONFIG_PWRSEQ_SIMPLE=y
 CONFIG_QCOM_A53PLL=m
 # CONFIG_QCOM_APR is not set
 CONFIG_QCOM_CLK_APCS_MSM8916=m
+# CONFIG_QCOM_COMMAND_DB is not set
 # CONFIG_QCOM_EBI2 is not set
 # CONFIG_QCOM_EMAC is not set
+# CONFIG_QCOM_GENI_SE is not set
 # CONFIG_QCOM_GLINK_SSR is not set
 # CONFIG_QCOM_HIDMA is not set
 # CONFIG_QCOM_HIDMA_MGMT is not set
diff --git a/kernel-armv7hl-lpae.config b/kernel-armv7hl-lpae.config
index 978f31b63..135d6d35b 100644
--- a/kernel-armv7hl-lpae.config
+++ b/kernel-armv7hl-lpae.config
@@ -4569,8 +4569,10 @@ CONFIG_PWRSEQ_SIMPLE=y
 CONFIG_QCOM_A53PLL=m
 # CONFIG_QCOM_APR is not set
 CONFIG_QCOM_CLK_APCS_MSM8916=m
+# CONFIG_QCOM_COMMAND_DB is not set
 # CONFIG_QCOM_EBI2 is not set
 # CONFIG_QCOM_EMAC is not set
+# CONFIG_QCOM_GENI_SE is not set
 # CONFIG_QCOM_GLINK_SSR is not set
 # CONFIG_QCOM_HIDMA is not set
 # CONFIG_QCOM_HIDMA_MGMT is not set
diff --git a/kernel-armv7hl.config b/kernel-armv7hl.config
index 447d1b4a8..0bfdb8c8b 100644
--- a/kernel-armv7hl.config
+++ b/kernel-armv7hl.config
@@ -4828,8 +4828,10 @@ CONFIG_QCOM_CLK_APCS_MSM8916=m
 CONFIG_QCOM_CLK_RPM=m
 CONFIG_QCOM_CLK_SMD_RPM=m
 CONFIG_QCOM_COINCELL=m
+# CONFIG_QCOM_COMMAND_DB is not set
 # CONFIG_QCOM_EBI2 is not set
 # CONFIG_QCOM_EMAC is not set
+# CONFIG_QCOM_GENI_SE is not set
 # CONFIG_QCOM_GLINK_SSR is not set
 CONFIG_QCOM_GSBI=m
 # CONFIG_QCOM_HIDMA is not set
diff --git a/kernel-i686-PAE.config b/kernel-i686-PAE.config
index 347e7f44f..d669d910c 100644
--- a/kernel-i686-PAE.config
+++ b/kernel-i686-PAE.config
@@ -4330,7 +4330,9 @@ CONFIG_PWRSEQ_SIMPLE=m
 # CONFIG_QCA7000_SPI is not set
 # CONFIG_QCA7000_UART is not set
 # CONFIG_QCOM_APR is not set
+# CONFIG_QCOM_COMMAND_DB is not set
 # CONFIG_QCOM_EMAC is not set
+# CONFIG_QCOM_GENI_SE is not set
 # CONFIG_QCOM_GLINK_SSR is not set
 # CONFIG_QCOM_HIDMA is not set
 # CONFIG_QCOM_HIDMA_MGMT is not set
diff --git a/kernel-i686-PAEdebug.config b/kernel-i686-PAEdebug.config
index 4e18d7640..d6ff03e68 100644
--- a/kernel-i686-PAEdebug.config
+++ b/kernel-i686-PAEdebug.config
@@ -4354,7 +4354,9 @@ CONFIG_PWRSEQ_SIMPLE=m
 # CONFIG_QCA7000_SPI is not set
 # CONFIG_QCA7000_UART is not set
 # CONFIG_QCOM_APR is not set
+# CONFIG_QCOM_COMMAND_DB is not set
 # CONFIG_QCOM_EMAC is not set
+# CONFIG_QCOM_GENI_SE is not set
 # CONFIG_QCOM_GLINK_SSR is not set
 # CONFIG_QCOM_HIDMA is not set
 # CONFIG_QCOM_HIDMA_MGMT is not set
diff --git a/kernel-i686-debug.config b/kernel-i686-debug.config
index 09d0e9c0f..f98911f1d 100644
--- a/kernel-i686-debug.config
+++ b/kernel-i686-debug.config
@@ -4354,7 +4354,9 @@ CONFIG_PWRSEQ_SIMPLE=m
 # CONFIG_QCA7000_SPI is not set
 # CONFIG_QCA7000_UART is not set
 # CONFIG_QCOM_APR is not set
+# CONFIG_QCOM_COMMAND_DB is not set
 # CONFIG_QCOM_EMAC is not set
+# CONFIG_QCOM_GENI_SE is not set
 # CONFIG_QCOM_GLINK_SSR is not set
 # CONFIG_QCOM_HIDMA is not set
 # CONFIG_QCOM_HIDMA_MGMT is not set
diff --git a/kernel-i686.config b/kernel-i686.config
index 393b469e3..d7f3bd510 100644
--- a/kernel-i686.config
+++ b/kernel-i686.config
@@ -4330,7 +4330,9 @@ CONFIG_PWRSEQ_SIMPLE=m
 # CONFIG_QCA7000_SPI is not set
 # CONFIG_QCA7000_UART is not set
 # CONFIG_QCOM_APR is not set
+# CONFIG_QCOM_COMMAND_DB is not set
 # CONFIG_QCOM_EMAC is not set
+# CONFIG_QCOM_GENI_SE is not set
 # CONFIG_QCOM_GLINK_SSR is not set
 # CONFIG_QCOM_HIDMA is not set
 # CONFIG_QCOM_HIDMA_MGMT is not set
diff --git a/kernel-ppc64-debug.config b/kernel-ppc64-debug.config
index 44b914d0c..e4108e807 100644
--- a/kernel-ppc64-debug.config
+++ b/kernel-ppc64-debug.config
@@ -4162,7 +4162,9 @@ CONFIG_PWRSEQ_SIMPLE=m
 # CONFIG_QCA7000_SPI is not set
 # CONFIG_QCA7000_UART is not set
 # CONFIG_QCOM_APR is not set
+# CONFIG_QCOM_COMMAND_DB is not set
 # CONFIG_QCOM_EMAC is not set
+# CONFIG_QCOM_GENI_SE is not set
 # CONFIG_QCOM_GLINK_SSR is not set
 # CONFIG_QCOM_HIDMA is not set
 # CONFIG_QCOM_HIDMA_MGMT is not set
diff --git a/kernel-ppc64.config b/kernel-ppc64.config
index 1cc874ff0..380293563 100644
--- a/kernel-ppc64.config
+++ b/kernel-ppc64.config
@@ -4136,7 +4136,9 @@ CONFIG_PWRSEQ_SIMPLE=m
 # CONFIG_QCA7000_SPI is not set
 # CONFIG_QCA7000_UART is not set
 # CONFIG_QCOM_APR is not set
+# CONFIG_QCOM_COMMAND_DB is not set
 # CONFIG_QCOM_EMAC is not set
+# CONFIG_QCOM_GENI_SE is not set
 # CONFIG_QCOM_GLINK_SSR is not set
 # CONFIG_QCOM_HIDMA is not set
 # CONFIG_QCOM_HIDMA_MGMT is not set
diff --git a/kernel-ppc64le-debug.config b/kernel-ppc64le-debug.config
index 3f88fac82..bc918aa5c 100644
--- a/kernel-ppc64le-debug.config
+++ b/kernel-ppc64le-debug.config
@@ -4100,7 +4100,9 @@ CONFIG_PWRSEQ_SIMPLE=m
 # CONFIG_QCA7000_SPI is not set
 # CONFIG_QCA7000_UART is not set
 # CONFIG_QCOM_APR is not set
+# CONFIG_QCOM_COMMAND_DB is not set
 # CONFIG_QCOM_EMAC is not set
+# CONFIG_QCOM_GENI_SE is not set
 # CONFIG_QCOM_GLINK_SSR is not set
 # CONFIG_QCOM_HIDMA is not set
 # CONFIG_QCOM_HIDMA_MGMT is not set
diff --git a/kernel-ppc64le.config b/kernel-ppc64le.config
index 73479b83c..fc2b38444 100644
--- a/kernel-ppc64le.config
+++ b/kernel-ppc64le.config
@@ -4074,7 +4074,9 @@ CONFIG_PWRSEQ_SIMPLE=m
 # CONFIG_QCA7000_SPI is not set
 # CONFIG_QCA7000_UART is not set
 # CONFIG_QCOM_APR is not set
+# CONFIG_QCOM_COMMAND_DB is not set
 # CONFIG_QCOM_EMAC is not set
+# CONFIG_QCOM_GENI_SE is not set
 # CONFIG_QCOM_GLINK_SSR is not set
 # CONFIG_QCOM_HIDMA is not set
 # CONFIG_QCOM_HIDMA_MGMT is not set
diff --git a/kernel-s390x-debug.config b/kernel-s390x-debug.config
index 4cab386a8..69b449fa5 100644
--- a/kernel-s390x-debug.config
+++ b/kernel-s390x-debug.config
@@ -3987,7 +3987,9 @@ CONFIG_PWRSEQ_SIMPLE=m
 # CONFIG_QCA7000_SPI is not set
 # CONFIG_QCA7000_UART is not set
 # CONFIG_QCOM_APR is not set
+# CONFIG_QCOM_COMMAND_DB is not set
 # CONFIG_QCOM_EMAC is not set
+# CONFIG_QCOM_GENI_SE is not set
 # CONFIG_QCOM_GLINK_SSR is not set
 # CONFIG_QCOM_HIDMA is not set
 # CONFIG_QCOM_HIDMA_MGMT is not set
diff --git a/kernel-s390x.config b/kernel-s390x.config
index 67f40d76a..d4474b15d 100644
--- a/kernel-s390x.config
+++ b/kernel-s390x.config
@@ -3961,7 +3961,9 @@ CONFIG_PWRSEQ_SIMPLE=m
 # CONFIG_QCA7000_SPI is not set
 # CONFIG_QCA7000_UART is not set
 # CONFIG_QCOM_APR is not set
+# CONFIG_QCOM_COMMAND_DB is not set
 # CONFIG_QCOM_EMAC is not set
+# CONFIG_QCOM_GENI_SE is not set
 # CONFIG_QCOM_GLINK_SSR is not set
 # CONFIG_QCOM_HIDMA is not set
 # CONFIG_QCOM_HIDMA_MGMT is not set
diff --git a/kernel-x86_64-debug.config b/kernel-x86_64-debug.config
index 9eb25e537..4e9040041 100644
--- a/kernel-x86_64-debug.config
+++ b/kernel-x86_64-debug.config
@@ -4397,7 +4397,9 @@ CONFIG_PWRSEQ_SIMPLE=m
 # CONFIG_QCA7000_SPI is not set
 # CONFIG_QCA7000_UART is not set
 # CONFIG_QCOM_APR is not set
+# CONFIG_QCOM_COMMAND_DB is not set
 # CONFIG_QCOM_EMAC is not set
+# CONFIG_QCOM_GENI_SE is not set
 # CONFIG_QCOM_GLINK_SSR is not set
 # CONFIG_QCOM_HIDMA is not set
 # CONFIG_QCOM_HIDMA_MGMT is not set
diff --git a/kernel-x86_64.config b/kernel-x86_64.config
index 43a9a6461..b72351703 100644
--- a/kernel-x86_64.config
+++ b/kernel-x86_64.config
@@ -4373,7 +4373,9 @@ CONFIG_PWRSEQ_SIMPLE=m
 # CONFIG_QCA7000_SPI is not set
 # CONFIG_QCA7000_UART is not set
 # CONFIG_QCOM_APR is not set
+# CONFIG_QCOM_COMMAND_DB is not set
 # CONFIG_QCOM_EMAC is not set
+# CONFIG_QCOM_GENI_SE is not set
 # CONFIG_QCOM_GLINK_SSR is not set
 # CONFIG_QCOM_HIDMA is not set
 # CONFIG_QCOM_HIDMA_MGMT is not set
diff --git a/kernel.spec b/kernel.spec
index 8467a8724..d56797d16 100644
--- a/kernel.spec
+++ b/kernel.spec
@@ -77,7 +77,7 @@ Summary: The Linux kernel
 # The rc snapshot level
 %global rcrev 0
 # The git snapshot level
-%define gitrev 6
+%define gitrev 7
 # Set rpm version accordingly
 %define rpmversion 4.%{upstream_sublevel}.0
 %endif
@@ -600,19 +600,9 @@ Patch306: arm-dts-imx6qdl-udoo-Disable-usbh1-to-avoid-kernel-hang.patch
 
 Patch309: arm-tegra-fix-nouveau-crash.patch
 
-# https://patchwork.kernel.org/patch/10346089/
-Patch310: arm-dts-Add-am335x-pocketbeagle.patch
-
-# https://patchwork.kernel.org/patch/10354521/
-# https://patchwork.kernel.org/patch/10354187/
-# https://patchwork.kernel.org/patch/10306793/
-# https://patchwork.kernel.org/patch/10133165/
-Patch313: mvebu-a37xx-fixes.patch
-
 Patch324: bcm283x-clk-audio-fixes.patch
 
 # Enabling Patches for the RPi3+
-Patch330: bcm2837-rpi-initial-3plus-support.patch
 Patch332: bcm2837-enable-pmu.patch
 Patch333: bcm2837-lan78xx-fixes.patch
 
@@ -628,6 +618,9 @@ Patch501: Fix-for-module-sig-verification.patch
 # rhbz 1431375
 Patch502: input-rmi4-remove-the-need-for-artifical-IRQ.patch
 
+# rhbz 1589855
+Patch503: 0001-Revert-debugfs-inode-debugfs_create_dir-uses-mode-pe.patch
+
 # END OF PATCH DEFINITIONS
 
 %endif
@@ -1866,6 +1859,9 @@ fi
 #
 #
 %changelog
+* Tue Jun 12 2018 Laura Abbott <labbott@redhat.com> - 4.18.0-0.rc0.git7.1
+- Linux v4.17-11346-g8efcf34a2639
+
 * Mon Jun 11 2018 Justin M. Forbes <jforbes@fedoraproject.org>
 - Secure Boot updates
 
diff --git a/mvebu-a37xx-fixes.patch b/mvebu-a37xx-fixes.patch
deleted file mode 100644
index 0c04e8b00..000000000
--- a/mvebu-a37xx-fixes.patch
+++ /dev/null
@@ -1,128 +0,0 @@
-From patchwork Sun Mar 25 19:57:36 2018
-Content-Type: text/plain; charset="utf-8"
-MIME-Version: 1.0
-Content-Transfer-Encoding: 8bit
-Subject: arm64: dts: armada-3720-espressobin: wire up spi flash
-From: =?utf-8?q?Uwe_Kleine-K=C3=B6nig?= <u.kleine-koenig@pengutronix.de>
-X-Patchwork-Id: 10306793
-Message-Id: <20180325195736.19782-1-u.kleine-koenig@pengutronix.de>
-To: Jason Cooper <jason@lakedaemon.net>, Andrew Lunn <andrew@lunn.ch>,
- Gregory Clement <gregory.clement@bootlin.com>,
- Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com>
-Cc: Ellie Reeves <ellierevves@gmail.com>,
- linux-arm-kernel@lists.infradead.org, kernel@pengutronix.de
-Date: Sun, 25 Mar 2018 21:57:36 +0200
-
-From: Ellie Reeves <ellierevves@gmail.com>
-
-This is the storage the machine boots from by default. The partitioning
-is taken from the U-Boot that is shipped with the board. There is some
-more space on the flash that isn't used.
-
-Signed-off-by: Ellie Reeves <ellierevves@gmail.com>
-Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
----
- .../boot/dts/marvell/armada-3720-espressobin.dts   | 27 ++++++++++++++++++++++
- 1 file changed, 27 insertions(+)
-
-diff --git a/arch/arm64/boot/dts/marvell/armada-3720-espressobin.dts b/arch/arm64/boot/dts/marvell/armada-3720-espressobin.dts
-index 882d6e4a04e4..5f98c2fecca4 100644
---- a/arch/arm64/boot/dts/marvell/armada-3720-espressobin.dts
-+++ b/arch/arm64/boot/dts/marvell/armada-3720-espressobin.dts
-@@ -108,6 +108,33 @@
- 	status = "okay";
- };
- 
-+&spi0 {
-+	status = "okay";
-+
-+	flash@0 {
-+		reg = <0>;
-+		compatible = "winbond,w25q32dw", "jedec,spi-flash";
-+		spi-max-frequency = <104000000>;
-+		m25p,fast-read;
-+
-+		partitions {
-+			compatible = "fixed-partitions";
-+			#address-cells = <1>;
-+			#size-cells = <1>;
-+
-+			partition@0 {
-+				label = "uboot";
-+				reg = <0 0x180000>;
-+			};
-+
-+			partition@180000 {
-+				label = "ubootenv";
-+				reg = <0x180000 0x10000>;
-+			};
-+		};
-+	};
-+};
-+
- /* Exported on the micro USB connector J5 through an FTDI */
- &uart0 {
- 	pinctrl-names = "default";
-From patchwork Sat Apr 21 14:03:42 2018
-Content-Type: text/plain; charset="utf-8"
-MIME-Version: 1.0
-Content-Transfer-Encoding: 7bit
-Subject: arm64: dts: marvell: armada-37xx: reserve memory for ATF
-From: Miquel Raynal <miquel.raynal@bootlin.com>
-X-Patchwork-Id: 10354187
-Message-Id: <20180421140342.25082-1-miquel.raynal@bootlin.com>
-To: Gregory Clement <gregory.clement@bootlin.com>,
- Jason Cooper <jason@lakedaemon.net>, Andrew Lunn <andrew@lunn.ch>,
- Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com>
-Cc: Mark Rutland <mark.rutland@arm.com>, devicetree@vger.kernel.org,
- Antoine Tenart <antoine.tenart@bootlin.com>,
- Catalin Marinas <catalin.marinas@arm.com>,
- Will Deacon <will.deacon@arm.com>, 
- Maxime Chevallier <maxime.chevallier@bootlin.com>,
- Nadav Haklai <nadavh@marvell.com>, Rob Herring <robh+dt@kernel.org>, 
- Thomas Petazzoni <thomas.petazzoni@bootlin.com>,
- Miquel Raynal <miquel.raynal@bootlin.com>, Victor Gu <xigu@marvell.com>, 
- linux-arm-kernel@lists.infradead.org
-Date: Sat, 21 Apr 2018 16:03:42 +0200
-
-From: Victor Gu <xigu@marvell.com>
-
-The PSCI area should be reserved in Linux for PSCI operations such as
-suspend/resume.
-
-Reserve 2MiB of memory which matches the area used by ATF (BL1, BL2,
-BL3x, see [1] in ATF source code). This covers all PSCI code and data
-area and is 2MiB aligned, which is required by Linux for huge pages
-handling.
-
-[1] plat/marvell/a3700/common/include/platform_def.h
-
-Signed-off-by: Victor Gu <xigu@marvell.com>
-[miquel.raynal@bootlin.com: reword of commit message]
-Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
----
- arch/arm64/boot/dts/marvell/armada-37xx.dtsi | 11 +++++++++++
- 1 file changed, 11 insertions(+)
-
-diff --git a/arch/arm64/boot/dts/marvell/armada-37xx.dtsi b/arch/arm64/boot/dts/marvell/armada-37xx.dtsi
-index 97207a61bc79..429ce91bfc39 100644
---- a/arch/arm64/boot/dts/marvell/armada-37xx.dtsi
-+++ b/arch/arm64/boot/dts/marvell/armada-37xx.dtsi
-@@ -22,6 +22,17 @@
- 		serial1 = &uart1;
- 	};
- 
-+	reserved-memory {
-+		#address-cells = <2>;
-+		#size-cells = <2>;
-+		ranges;
-+
-+		psci-area@4000000 {
-+			reg = <0 0x4000000 0 0x200000>;
-+			no-map;
-+		};
-+	};
-+
- 	cpus {
- 		#address-cells = <1>;
- 		#size-cells = <0>;
diff --git a/sources b/sources
index 8cef2bf14..db3631f9e 100644
--- a/sources
+++ b/sources
@@ -1,2 +1,2 @@
 SHA512 (linux-4.17.tar.xz) = 4d9de340a26155a89ea8773131c76220cc2057f2b5d031b467b60e8b14c1842518e2d60a863d8c695f0f7640f3f18d43826201984a238dade857b6cef79837db
-SHA512 (patch-4.17-git6.xz) = a40b0435f65ba46eaddfd7245c2c66db3c865367aed0f7a933ae07bfad09830318aec007adcff1e367da4741cfdb71c2ecc341d246d6957354b70e23ede03731
+SHA512 (patch-4.17-git7.xz) = 5f191dfe18e0de3433aec757a994d768ce67e2661c15feb06ddf64bbe0074436ddf6c21354b95c7eebd725dc8b5bfe82555212a431a937909d55d2afd122757e