kernel-5.9.0-0.rc0.20200813gitdc06fe51d26e.1

* Thu Aug 13 2020 Fedora Kernel Team <kernel-team@fedoraproject.org> [5.9.0-0.rc0.20200813gitdc06fe51d26e.1]
- dc06fe51d26e rebase
- More mismatches ("Justin M. Forbes")
- Fedora config change due to deps ("Justin M. Forbes")
- CONFIG_SND_SOC_MAX98390 is now selected by SND_SOC_INTEL_DA7219_MAX98357A_GENERIC ("Justin M. Forbes")
- Config change required for build part 2 ("Justin M. Forbes")
- Config change required for build ("Justin M. Forbes")
- Fedora config update ("Justin M. Forbes")
- Revert "Merge branch 'make_configs_fix' into 'os-build'" (Justin Forbes)
- redhat/configs/process_configs.sh: Remove *.config.orig files (Prarit Bhargava)
- redhat/configs/process_configs.sh: Add process_configs_known_broken flag (Prarit Bhargava)
- redhat/Makefile: Fix '*-configs' targets (Prarit Bhargava)
- Updated changelog for the release based on v5.8 (Fedora Kernel Team)
- Add ability to sync upstream through Makefile (Don Zickus)
- Add master merge check (Don Zickus)
- Replace hardcoded values 'os-build' and project id with variables (Don Zickus)
- gitattributes: Remove unnecesary export restrictions (Prarit Bhargava)
- redhat/Makefile.common: Fix MARKER (Prarit Bhargava)
Resolves: rhbz#

Signed-off-by: Justin M. Forbes <jforbes@fedoraproject.org>

1 files changed, 0 insertions, 112 deletions

diff --git a/0001-arm64-dts-sun50i-a64-pinephone-Enable-LCD-support-on.patch b/0001-arm64-dts-sun50i-a64-pinephone-Enable-LCD-support-on.patch
deleted file mode 100644
index a38cd7250..000000000
--- a/0001-arm64-dts-sun50i-a64-pinephone-Enable-LCD-support-on.patch
+++ /dev/null
@@ -1,112 +0,0 @@
-From 0000000000000000000000000000000000000000 Mon Sep 17 00:00:00 2001
-From: Icenowy Zheng <icenowy@aosc.io>
-Date: Fri, 26 Jun 2020 02:56:00 +0200
-Subject: [PATCH] arm64: dts: sun50i-a64-pinephone: Enable LCD support on
- PinePhone
-
-PinePhone uses PWM backlight and a XBD599 LCD panel over DSI for
-display.
-
-Backlight levels curve was optimized by Martijn Braam using a
-lux meter.
-
-Add its device nodes.
-
-Signed-off-by: Icenowy Zheng <icenowy@aosc.io>
-Signed-off-by: Martijn Braam <martijn@brixit.nl>
-Signed-off-by: Ondrej Jirman <megous@megous.com>
----
- .../allwinner/sun50i-a64-pinephone-1.1.dts    | 19 ++++++++++
- .../dts/allwinner/sun50i-a64-pinephone.dtsi   | 35 +++++++++++++++++++
- 2 files changed, 54 insertions(+)
-
-diff --git a/arch/arm64/boot/dts/allwinner/sun50i-a64-pinephone-1.1.dts b/arch/arm64/boot/dts/allwinner/sun50i-a64-pinephone-1.1.dts
-index 06a775c41664..3e99a87e9ce5 100644
---- a/arch/arm64/boot/dts/allwinner/sun50i-a64-pinephone-1.1.dts
-+++ b/arch/arm64/boot/dts/allwinner/sun50i-a64-pinephone-1.1.dts
-@@ -9,3 +9,22 @@ / {
- 	model = "Pine64 PinePhone Braveheart (1.1)";
- 	compatible = "pine64,pinephone-1.1", "allwinner,sun50i-a64";
- };
-+
-+&backlight {
-+	power-supply = <&reg_ldo_io0>;
-+	/*
-+	 * PWM backlight circuit on this PinePhone revision was changed since
-+	 * 1.0, and the lowest PWM duty cycle that doesn't lead to backlight
-+	 * being off is around 20%. Duty cycle for the lowest brightness level
-+	 * also varries quite a bit between individual boards, so the lowest
-+	 * value here was chosen as a safe default.
-+	 */
-+	brightness-levels = <
-+		774  793  814  842
-+		882  935  1003 1088
-+		1192 1316 1462 1633
-+		1830 2054 2309 2596
-+		2916 3271 3664 4096>;
-+	num-interpolated-steps = <50>;
-+	default-brightness-level = <400>;
-+};
-diff --git a/arch/arm64/boot/dts/allwinner/sun50i-a64-pinephone.dtsi b/arch/arm64/boot/dts/allwinner/sun50i-a64-pinephone.dtsi
-index cefda145c3c9..85a7aa5efd32 100644
---- a/arch/arm64/boot/dts/allwinner/sun50i-a64-pinephone.dtsi
-+++ b/arch/arm64/boot/dts/allwinner/sun50i-a64-pinephone.dtsi
-@@ -16,6 +16,13 @@ aliases {
- 		serial0 = &uart0;
- 	};
-
-+	backlight: backlight {
-+		compatible = "pwm-backlight";
-+		pwms = <&r_pwm 0 50000 PWM_POLARITY_INVERTED>;
-+		enable-gpios = <&pio 7 10 GPIO_ACTIVE_HIGH>; /* PH10 */
-+		/* Backlight configuration differs per PinePhone revision. */
-+	};
-+
- 	chosen {
- 		stdout-path = "serial0:115200n8";
- 	};
-@@ -84,6 +91,30 @@ &dai {
- 	status = "okay";
- };
-
-+&de {
-+	status = "okay";
-+};
-+
-+&dphy {
-+	status = "okay";
-+};
-+
-+&dsi {
-+	vcc-dsi-supply = <&reg_dldo1>;
-+	#address-cells = <1>;
-+	#size-cells = <0>;
-+	status = "okay";
-+
-+	panel@0 {
-+		compatible = "xingbangda,xbd599";
-+		reg = <0>;
-+		reset-gpios = <&pio 3 23 GPIO_ACTIVE_LOW>; /* PD23 */
-+		iovcc-supply = <&reg_dldo2>;
-+		vcc-supply = <&reg_ldo_io0>;
-+		backlight = <&backlight>;
-+	};
-+};
-+
- &ehci0 {
- 	status = "okay";
- };
-@@ -188,6 +219,10 @@ &r_pio {
- 	 */
- };
-
-+&r_pwm {
-+	status = "okay";
-+};
-+
- &r_rsb {
- 	status = "okay";
-
--- 
-2.26.2
-