From f7a3bf654752fa0e92c7ab3e57e48d3415632852 Mon Sep 17 00:00:00 2001 From: "Justin M. Forbes" Date: Thu, 13 Aug 2020 12:44:32 -0500 Subject: kernel-5.9.0-0.rc0.20200813gitdc06fe51d26e.1 * Thu Aug 13 2020 Fedora Kernel Team [5.9.0-0.rc0.20200813gitdc06fe51d26e.1] - dc06fe51d26e rebase - More mismatches ("Justin M. Forbes") - Fedora config change due to deps ("Justin M. Forbes") - CONFIG_SND_SOC_MAX98390 is now selected by SND_SOC_INTEL_DA7219_MAX98357A_GENERIC ("Justin M. Forbes") - Config change required for build part 2 ("Justin M. Forbes") - Config change required for build ("Justin M. Forbes") - Fedora config update ("Justin M. Forbes") - Revert "Merge branch 'make_configs_fix' into 'os-build'" (Justin Forbes) - redhat/configs/process_configs.sh: Remove *.config.orig files (Prarit Bhargava) - redhat/configs/process_configs.sh: Add process_configs_known_broken flag (Prarit Bhargava) - redhat/Makefile: Fix '*-configs' targets (Prarit Bhargava) - Updated changelog for the release based on v5.8 (Fedora Kernel Team) - Add ability to sync upstream through Makefile (Don Zickus) - Add master merge check (Don Zickus) - Replace hardcoded values 'os-build' and project id with variables (Don Zickus) - gitattributes: Remove unnecesary export restrictions (Prarit Bhargava) - redhat/Makefile.common: Fix MARKER (Prarit Bhargava) Resolves: rhbz# Signed-off-by: Justin M. Forbes --- ...un50i-a64-pinephone-Enable-LCD-support-on.patch | 112 --------------------- 1 file changed, 112 deletions(-) delete mode 100644 0001-arm64-dts-sun50i-a64-pinephone-Enable-LCD-support-on.patch (limited to '0001-arm64-dts-sun50i-a64-pinephone-Enable-LCD-support-on.patch') diff --git a/0001-arm64-dts-sun50i-a64-pinephone-Enable-LCD-support-on.patch b/0001-arm64-dts-sun50i-a64-pinephone-Enable-LCD-support-on.patch deleted file mode 100644 index a38cd7250..000000000 --- a/0001-arm64-dts-sun50i-a64-pinephone-Enable-LCD-support-on.patch +++ /dev/null @@ -1,112 +0,0 @@ -From 0000000000000000000000000000000000000000 Mon Sep 17 00:00:00 2001 -From: Icenowy Zheng -Date: Fri, 26 Jun 2020 02:56:00 +0200 -Subject: [PATCH] arm64: dts: sun50i-a64-pinephone: Enable LCD support on - PinePhone - -PinePhone uses PWM backlight and a XBD599 LCD panel over DSI for -display. - -Backlight levels curve was optimized by Martijn Braam using a -lux meter. - -Add its device nodes. - -Signed-off-by: Icenowy Zheng -Signed-off-by: Martijn Braam -Signed-off-by: Ondrej Jirman ---- - .../allwinner/sun50i-a64-pinephone-1.1.dts | 19 ++++++++++ - .../dts/allwinner/sun50i-a64-pinephone.dtsi | 35 +++++++++++++++++++ - 2 files changed, 54 insertions(+) - -diff --git a/arch/arm64/boot/dts/allwinner/sun50i-a64-pinephone-1.1.dts b/arch/arm64/boot/dts/allwinner/sun50i-a64-pinephone-1.1.dts -index 06a775c41664..3e99a87e9ce5 100644 ---- a/arch/arm64/boot/dts/allwinner/sun50i-a64-pinephone-1.1.dts -+++ b/arch/arm64/boot/dts/allwinner/sun50i-a64-pinephone-1.1.dts -@@ -9,3 +9,22 @@ / { - model = "Pine64 PinePhone Braveheart (1.1)"; - compatible = "pine64,pinephone-1.1", "allwinner,sun50i-a64"; - }; -+ -+&backlight { -+ power-supply = <®_ldo_io0>; -+ /* -+ * PWM backlight circuit on this PinePhone revision was changed since -+ * 1.0, and the lowest PWM duty cycle that doesn't lead to backlight -+ * being off is around 20%. Duty cycle for the lowest brightness level -+ * also varries quite a bit between individual boards, so the lowest -+ * value here was chosen as a safe default. -+ */ -+ brightness-levels = < -+ 774 793 814 842 -+ 882 935 1003 1088 -+ 1192 1316 1462 1633 -+ 1830 2054 2309 2596 -+ 2916 3271 3664 4096>; -+ num-interpolated-steps = <50>; -+ default-brightness-level = <400>; -+}; -diff --git a/arch/arm64/boot/dts/allwinner/sun50i-a64-pinephone.dtsi b/arch/arm64/boot/dts/allwinner/sun50i-a64-pinephone.dtsi -index cefda145c3c9..85a7aa5efd32 100644 ---- a/arch/arm64/boot/dts/allwinner/sun50i-a64-pinephone.dtsi -+++ b/arch/arm64/boot/dts/allwinner/sun50i-a64-pinephone.dtsi -@@ -16,6 +16,13 @@ aliases { - serial0 = &uart0; - }; - -+ backlight: backlight { -+ compatible = "pwm-backlight"; -+ pwms = <&r_pwm 0 50000 PWM_POLARITY_INVERTED>; -+ enable-gpios = <&pio 7 10 GPIO_ACTIVE_HIGH>; /* PH10 */ -+ /* Backlight configuration differs per PinePhone revision. */ -+ }; -+ - chosen { - stdout-path = "serial0:115200n8"; - }; -@@ -84,6 +91,30 @@ &dai { - status = "okay"; - }; - -+&de { -+ status = "okay"; -+}; -+ -+&dphy { -+ status = "okay"; -+}; -+ -+&dsi { -+ vcc-dsi-supply = <®_dldo1>; -+ #address-cells = <1>; -+ #size-cells = <0>; -+ status = "okay"; -+ -+ panel@0 { -+ compatible = "xingbangda,xbd599"; -+ reg = <0>; -+ reset-gpios = <&pio 3 23 GPIO_ACTIVE_LOW>; /* PD23 */ -+ iovcc-supply = <®_dldo2>; -+ vcc-supply = <®_ldo_io0>; -+ backlight = <&backlight>; -+ }; -+}; -+ - &ehci0 { - status = "okay"; - }; -@@ -188,6 +219,10 @@ &r_pio { - */ - }; - -+&r_pwm { -+ status = "okay"; -+}; -+ - &r_rsb { - status = "okay"; - --- -2.26.2 - -- cgit