krb5.git - MIT Kerberos patches

diff options

Diffstat (limited to 'src/plugins/locate')

0 files changed, 0 insertions, 0 deletions

/* SPDX-License-Identifier: GPL-2.0+ */ /* * DHCOM DH-iMX6 PDK board configuration * * Copyright (C) 2017 Marek Vasut <marex@denx.de> */ #ifndef __DH_IMX6_CONFIG_H #define __DH_IMX6_CONFIG_H #include <asm/arch/imx-regs.h> #include "mx6_common.h" /* * SPI NOR layout: * 0x00_0000-0x00_ffff ... U-Boot SPL * 0x01_0000-0x0f_ffff ... U-Boot * 0x10_0000-0x10_ffff ... U-Boot env #1 * 0x11_0000-0x11_ffff ... U-Boot env #2 * 0x12_0000-0x1f_ffff ... UNUSED */ /* SPL */ #include "imx6_spl.h" /* common IMX6 SPL configuration */ #define CONFIG_SYS_SPI_U_BOOT_OFFS 0x11400 #define CONFIG_SPL_TARGET "u-boot-with-spl.imx" /* Miscellaneous configurable options */ #define CONFIG_CMDLINE_TAG #define CONFIG_SETUP_MEMORY_TAGS #define CONFIG_INITRD_TAG #define CONFIG_REVISION_TAG #define CONFIG_BZIP2 /* Size of malloc() pool */ #define CONFIG_SYS_MALLOC_LEN (4 * SZ_1M) /* Bootcounter */ #define CONFIG_SYS_BOOTCOUNT_BE /* FEC ethernet */ #define CONFIG_MII #define IMX_FEC_BASE ENET_BASE_ADDR #define CONFIG_FEC_XCV_TYPE RMII #define CONFIG_ETHPRIME "FEC" #define CONFIG_FEC_MXC_PHYADDR 0 #define CONFIG_ARP_TIMEOUT 200UL /* Fuses */ #ifdef CONFIG_CMD_FUSE #define CONFIG_MXC_OCOTP #endif /* I2C Configs */ #define CONFIG_SYS_I2C #define CONFIG_SYS_I2C_MXC #define CONFIG_SYS_I2C_MXC_I2C1 /* enable I2C bus 1 */ #define CONFIG_SYS_I2C_MXC_I2C2 /* enable I2C bus 2 */ #define CONFIG_SYS_I2C_MXC_I2C3 /* enable I2C bus 3 */ #define CONFIG_SYS_I2C_SPEED 100000 /* MMC Configs */ #define CONFIG_FSL_USDHC #define CONFIG_SYS_FSL_ESDHC_ADDR 0 #define CONFIG_SYS_FSL_USDHC_NUM 3 #define CONFIG_SYS_MMC_ENV_DEV 2 /* 1 = SDHC3, 2 = SDHC4 (eMMC) */ /* SATA Configs */ #ifdef CONFIG_CMD_SATA #define CONFIG_SYS_SATA_MAX_DEVICE 1 #define CONFIG_DWC_AHSATA_PORT_ID 0 #define CONFIG_DWC_AHSATA_BASE_ADDR SATA_ARB_BASE_ADDR #define CONFIG_LBA48 #endif /* SPI Flash Configs */ #ifdef CONFIG_CMD_SF #define CONFIG_SF_DEFAULT_BUS 0 #define CONFIG_SF_DEFAULT_CS 0 #define CONFIG_SF_DEFAULT_SPEED 25000000 #define CONFIG_SF_DEFAULT_MODE (SPI_MODE_0) #endif /* UART */ #define CONFIG_MXC_UART #define CONFIG_MXC_UART_BASE UART1_BASE #define CONFIG_BAUDRATE 115200 /* USB Configs */ #ifdef CONFIG_CMD_USB #define CONFIG_EHCI_HCD_INIT_AFTER_RESET #define CONFIG_USB_HOST_ETHER #define CONFIG_USB_ETHER_ASIX #define CONFIG_MXC_USB_PORTSC (PORT_PTS_UTMI | PORT_PTS_PTW) #define CONFIG_MXC_USB_FLAGS 0 #define CONFIG_USB_MAX_CONTROLLER_COUNT 2 /* Enabled USB controller number */ /* USB Gadget (DFU, UMS) */ #if defined(CONFIG_CMD_DFU) || defined(CONFIG_CMD_USB_MASS_STORAGE) #define CONFIG_SYS_DFU_DATA_BUF_SIZE (16 * 1024 * 1024) #define DFU_DEFAULT_POLL_TIMEOUT 300 /* USB IDs */ #define CONFIG_G_DNL_UMS_VENDOR_NUM 0x0525 #define CONFIG_G_DNL_UMS_PRODUCT_NUM 0xA4A5 #endif #endif /* Watchdog */ #define CONFIG_HW_WATCHDOG #define CONFIG_IMX_WATCHDOG #define CONFIG_WATCHDOG_TIMEOUT_MSECS 60000 /* allow to overwrite serial and ethaddr */ #define CONFIG_ENV_OVERWRITE #define CONFIG_LOADADDR 0x12000000 #define CONFIG_SYS_LOAD_ADDR CONFIG_LOADADDR #ifndef CONFIG_SPL_BUILD #define CONFIG_EXTRA_ENV_SETTINGS \ "console=ttymxc0,115200\0" \ "fdt_addr=0x18000000\0" \ "fdt_high=0xffffffff\0" \ "initrd_high=0xffffffff\0" \ "kernel_addr_r=0x10008000\0" \ "fdt_addr_r=0x13000000\0" \ "ramdisk_addr_r=0x18000000\0" \ "scriptaddr=0x14000000\0" \ "fdtfile=imx6q-dhcom-pdk2.dtb\0"\ BOOTENV #define CONFIG_BOOTCOMMAND "run distro_bootcmd" #define BOOT_TARGET_DEVICES(func) \ func(MMC, mmc, 0) \ func(MMC, mmc, 2) \ func(USB, usb, 1) \ func(SATA, sata, 0) \ func(DHCP, dhcp, na) #include <config_distro_bootcmd.h> #endif


context:
space:
mode: