Move selftest code to top-level.

22 files changed, 165 insertions, 3637 deletions

diff --git a/source4/selftest/README b/source4/selftest/README
deleted file mode 100644
index f8be20a569c..00000000000
--- a/source4/selftest/README
+++ /dev/null
@@ -1,119 +0,0 @@
-# vim: ft=rst
-
-This directory contains test scripts that are useful for running a
-bunch of tests all at once. 
-
-Available testsuites
-====================
-The available testsuites are obtained from a script, usually 
-selftest/samba{3,4}_tests.sh. This script should for each testsuite output 
-the name of the test, the command to run and the environment that should be 
-provided. Use the included "plantest" function to generate the required output.
-
-Testsuite behaviour
-================================
-
-Exit code
-------------
-The testsuites should exit with a non-zero exit code if at least one 
-test failed. Skipped tests should not influence the exit code.
-
-Output format
--------------
-Testsuites can simply use the exit code to indicate whether all of their 
-tests have succeeded or one or more have failed. It is also possible to 
-provide more granular information using the Subunit protocol. 
-
-This protocol works by writing simple messages to standard output. Any 
-messages that can not be interpreted by this protocol are considered comments 
-for the last announced test.
-
-Accepted commands are:
-
-test
-~~~~~~~~~~~~
-test: <NAME>
-
-Announce that a new test with the specified name is starting
-
-success
-~~~~~~~~~~~~~~~
-success: <NAME> 
-
-Announce that the test with the specified name is done and ran successfully.
-
-failure
-~~~~~~~~~~~~~~~
-failure: <NAME> 
-failure: <NAME> [ REASON ]
-
-Announce that the test with the specified name failed. Optionally, it is 
-possible to specify a reason it failed.
-
-skip
-~~~~~~~~~~~~
-skip: <NAME>
-skip: <NAME> [ REASON ]
-
-Announce that the test with the specified name was skipped. Optionally a 
-reason can be specified.
-
-knownfail
-~~~~~~~~~~~~~~~~~~~~~~~~~~~~
-knownfail: <NAME>
-knownfail: <NAME> [ REASON ]
-
-Announce that the test with the specified name was run and failed as expected.
-Alternatively it is also possible to simply return "failure:" here but 
-specify in the samba4-knownfailures file that it is failing.
-
-Environments
-============
-Tests often need to run against a server with particular things set up, 
-a "environment". This environment is provided by the test "target": Samba 3, 
-Samba 4 or Windows.
-
-The following environments are currently available:
-
- - none: No server set up, no variables set.
- - dc: Domain controller set up. The following environment variables will 
-   be set:
-
-     * USERNAME: Administrator user name
-	 * PASSWORD: Administrator password
-	 * DOMAIN: Domain name
-	 * REALM: Realm name
-	 * SERVER: DC host name 
-	 * SERVER_IP: DC IPv4 address
-	 * NETBIOSNAME: DC NetBIOS name
-	 * NETIOSALIAS: DC NetBIOS alias
-
- - member: Domain controller and member server that is joined to it set up. The
-   following environment variables will be set:
-
-     * USERNAME: Domain administrator user name
-	 * PASSWORD: Domain administrator password
-	 * DOMAIN: Domain name
-	 * REALM: Realm name
-	 * SERVER: Name of the member server
-
-
-Running tests
-=============
-
-To run all the tests use::
-
-   make test
-
-To run a quick subset (aiming for about 1 minute of testing) run::
-
-   make quicktest
-
-To run a specific test, use this syntax::
-
-   make test TESTS=testname
-
-for example::
-
-   make test TESTS=samba4.BASE-DELETE
-
diff --git a/source4/selftest/SocketWrapper.pm b/source4/selftest/SocketWrapper.pm
deleted file mode 100644
index e63605b8dfd..00000000000
--- a/source4/selftest/SocketWrapper.pm
+++ /dev/null
@@ -1,66 +0,0 @@
-#!/usr/bin/perl
-# Bootstrap Samba and run a number of tests against it.
-# Copyright (C) 2005-2007 Jelmer Vernooij <jelmer@samba.org>
-# Published under the GNU GPL, v3 or later.
-
-package SocketWrapper;
-
-use Exporter;
-@ISA = qw(Exporter);
-@EXPORT_OK = qw(setup_dir setup_pcap set_default_iface);
-
-use strict;
-use FindBin qw($RealBin);
-
-sub setup_dir($$)
-{
-	my ($dir, $pcap) = @_;
-	my $pcap_dir = undef;
-
-	if (defined($dir)) {
-		if ( -d $dir ) {
-			unlink <$dir/*>;
-		} else {
-			mkdir($dir, 0777);
-		}
-
-		if ($pcap) {
-			$pcap_dir = $dir."/pcap";
-
-			if ( -d $pcap_dir ) {
-				unlink <$pcap_dir/*>;
-			} else {
-				mkdir($pcap_dir, 0777);
-			}
-		}
-	}
-
-	if (defined($pcap_dir)) {
-		$ENV{SOCKET_WRAPPER_PCAP_DIR} = $pcap_dir;
-	} else {
-		delete $ENV{SOCKET_WRAPPER_PCAP_DIR};
-	}
-
-	if (defined($dir)) {
-		$ENV{SOCKET_WRAPPER_DIR} = $dir;
-	} else {
-		delete $ENV{SOCKET_WRAPPER_DIR};
-	}
-
-	return $dir;
-}
-
-sub setup_pcap($)
-{
-	my ($pcap_file) = @_;
-
-	$ENV{SOCKET_WRAPPER_PCAP_FILE} = $pcap_file;
-}
-
-sub set_default_iface($)
-{
-	my ($i) = @_;
-	$ENV{SOCKET_WRAPPER_DEFAULT_IFACE} = $i;
-}
-
-1;
diff --git a/source4/selftest/Subunit.pm b/source4/selftest/Subunit.pm
deleted file mode 100644
index 05e51da5412..00000000000
--- a/source4/selftest/Subunit.pm
+++ /dev/null
@@ -1,97 +0,0 @@
-package Subunit;
-
-require Exporter;
-@ISA = qw(Exporter);
-@EXPORT_OK = qw(parse_results);
-
-use strict;
-
-sub parse_results($$$$$)
-{
-	my ($msg_ops, $statistics, $fh, $expecting_failure, $open_tests) = @_;
-	my $unexpected_ok = 0;
-	my $expected_fail = 0;
-	my $unexpected_fail = 0;
-	my $unexpected_err = 0;
-	my $orig_open_len = $#$open_tests;
-
-	while(<$fh>) {
-		if (/^test: (.+)\n/) {
-			$msg_ops->control_msg($_);
-			$msg_ops->start_test($open_tests, $1);
-			push (@$open_tests, $1);
-		} elsif (/^(success|successful|failure|skip|knownfail|error): (.*?)( \[)?([ \t]*)\n/) {
-			$msg_ops->control_msg($_);
-			my $reason = undef;
-			if ($3) {
-				$reason = "";
-				# reason may be specified in next lines
-				my $terminated = 0;
-				while(<$fh>) {
-					$msg_ops->control_msg($_);
-					if ($_ eq "]\n") { $terminated = 1; last; } else { $reason .= $_; }
-				}
-				
-				unless ($terminated) {
-					$statistics->{TESTS_ERROR}++;
-					$msg_ops->end_test($open_tests, $2, $1, 1, "reason interrupted");
-					return 1;
-				}
-			}
-			my $result = $1;
-			if ($1 eq "success" or $1 eq "successful") {
-				pop(@$open_tests); #FIXME: Check that popped value == $2
-				if ($expecting_failure->(join(".", @$open_tests) . ".$2")) {
-					$statistics->{TESTS_UNEXPECTED_OK}++;
-					$msg_ops->end_test($open_tests, $2, $1, 1, $reason);
-					$unexpected_ok++;
-				} else {
-					$statistics->{TESTS_EXPECTED_OK}++;
-					$msg_ops->end_test($open_tests, $2, $1, 0, $reason);
-				}
-			} elsif ($1 eq "failure") {
-				pop(@$open_tests); #FIXME: Check that popped value == $2
-				if ($expecting_failure->(join(".", @$open_tests) . ".$2")) {
-					$statistics->{TESTS_EXPECTED_FAIL}++;
-					$msg_ops->end_test($open_tests, $2, $1, 0, $reason);
-					$expected_fail++;
-				} else {
-					$statistics->{TESTS_UNEXPECTED_FAIL}++;
-					$msg_ops->end_test($open_tests, $2, $1, 1, $reason);
-					$unexpected_fail++;
-				}
-			} elsif ($1 eq "knownfail") {
-				pop(@$open_tests); #FIXME: Check that popped value == $2
-				$statistics->{TESTS_EXPECTED_FAIL}++;
-				$msg_ops->end_test($open_tests, $2, $1, 0, $reason);
-			} elsif ($1 eq "skip") {
-				$statistics->{TESTS_SKIP}++;
-				pop(@$open_tests); #FIXME: Check that popped value == $2
-				$msg_ops->end_test($open_tests, $2, $1, 0, $reason);
-			} elsif ($1 eq "error") {
-				$statistics->{TESTS_ERROR}++;
-				pop(@$open_tests); #FIXME: Check that popped value == $2
-				$msg_ops->end_test($open_tests, $2, $1, 1, $reason);
-				$unexpected_err++;
-			}
-		} else {
-			$msg_ops->output_msg($_);
-		}
-	}
-
-	while ($#$open_tests > $orig_open_len) {
-		$msg_ops->end_test($open_tests, pop(@$open_tests), "error", 1,
-				   "was started but never finished!");
-		$statistics->{TESTS_ERROR}++;
-		$unexpected_err++;
-	}
-
-	return 1 if $unexpected_err > 0;
-	return 1 if $unexpected_fail > 0;
-	return 1 if $unexpected_ok > 0 and $expected_fail > 0;
-	return 0 if $unexpected_ok > 0 and $expected_fail == 0;
-	return 0 if $expected_fail > 0;
-	return 1;
-}
-
-1;
diff --git a/source4/selftest/TODO b/source4/selftest/TODO
deleted file mode 100644
index 67776ffc766..00000000000
--- a/source4/selftest/TODO
+++ /dev/null
@@ -1,2 +0,0 @@
-- warn about unexpected successes
-- better way to detect that smbd has finished initialization
diff --git a/source4/selftest/config.mk b/source4/selftest/config.mk
index 5503a42cddf..9e5983d026b 100644
--- a/source4/selftest/config.mk
+++ b/source4/selftest/config.mk
@@ -2,12 +2,12 @@ TEST_FORMAT = plain
 
 SELFTEST = $(LD_LIBPATH_OVERRIDE) $(PERL) $(selftestdir)/selftest.pl --prefix=${selftest_prefix} \
     --builddir=$(builddir) --srcdir=$(srcdir) \
-    --expected-failures=$(srcdir)/samba4-knownfail \
+    --expected-failures=$(srcdir)/selftest/knownfail \
 	--format=$(TEST_FORMAT) \
-    --exclude=$(srcdir)/samba4-skip --testlist="./selftest/samba4_tests.sh|" \
+    --exclude=$(srcdir)/selftest/skip --testlist="./selftest/tests.sh|" \
     $(TEST_OPTIONS) 
 
-SELFTEST_NOSLOW_OPTS = --exclude=$(srcdir)/samba4-slow
+SELFTEST_NOSLOW_OPTS = --exclude=$(srcdir)/selftest/slow
 SELFTEST_QUICK_OPTS = $(SELFTEST_NOSLOW_OPTS) --quick 
 
 slowtest:: everything
diff --git a/source4/selftest/knownfail b/source4/selftest/knownfail
new file mode 100644
index 00000000000..f99db4fb1b0
--- /dev/null
+++ b/source4/selftest/knownfail
@@ -0,0 +1,52 @@
+# This file contains a list of regular expressions matching the names of 
+# tests that are expected to fail. 
+#
+# "make test" will not report failures for tests listed here and will consider
+# a successful run for any of these tests an error.
+local.resolve.*.async
+local.iconv.*.next_codepoint()
+base.delete.*.deltest20a
+base.delete.*.deltest20b
+rpc.winreg.*security
+samba4.local.registry.(dir|ldb).check hive security
+samba4.local.registry.local.security
+rpc.wkssvc
+rpc.handles.*.lsarpc-shared
+rpc.handles.*.mixed-shared
+rpc.epmapper.*.Insert
+rpc.epmapper.*.InqObject
+rpc.dfs.*
+rpc.drsuapi.*
+rpc.lsalookup
+rpc.cracknames
+rpc.netlogon.*.LogonUasLogon
+rpc.netlogon.*.LogonUasLogoff
+rpc.netlogon.*.DatabaseSync
+rpc.netlogon.*.DatabaseSync2
+rpc.netlogon.*.GetDcName
+rpc.netlogon.*.LogonControl
+rpc.netlogon.*.LogonControl2
+rpc.netlogon.*.GetAnyDCName
+rpc.netlogon.*.DsrEnumerateDomainTrusts
+rpc.netlogon.*.NetrEnumerateTrustedDomains
+rpc.netlogon.*.NetrEnumerateTrustedDomainsEx
+rpc.netlogon.*.DsrGetDcSiteCoverageW
+rpc.netlogon.*.DsRAddressToSitenamesW
+rpc.netlogon.*.DsRAddressToSitenamesExW
+rpc.netlogon.*.GetPassword
+rpc.netlogon.*.GetTrustPasswords
+base.charset.*.Testing partial surrogate
+.*net.api.delshare.*				# DelShare isn't implemented yet
+rap.*netservergetinfo
+smb2.persistent.handles1
+samba4.winbind.struct.*.LIST_GROUPS       # Not yet working in winbind
+samba4.winbind.struct.*.SHOW_SEQUENCE     # Not yet working in winbind
+samba4.winbind.struct.*.GETPWENT          # Not yet working in winbind
+samba4.winbind.struct.*.SETPWENT          # Not yet working in winbind
+samba4.winbind.struct.*.LOOKUP_NAME_SID   # Not yet working in winbind
+^samba4.*base.delaywrite.*update of write time and SMBwrite truncate$
+^samba4.*base.delaywrite.*update of write time and SMBwrite truncate expand$
+^samba4.*base.delaywrite.*delayed update of write time 3a$
+^samba4.*base.delaywrite.*delayed update of write time 3c$
+^samba4.*base.delaywrite.*update of write time using SET_END_OF_FILE$
+^samba4.*base.delaywrite.*update of write time using SET_ALLOCATION_SIZE$
diff --git a/source4/selftest/output/buildfarm.pm b/source4/selftest/output/buildfarm.pm
deleted file mode 100644
index cee6c1e63a8..00000000000
--- a/source4/selftest/output/buildfarm.pm
+++ /dev/null
@@ -1,120 +0,0 @@
-#!/usr/bin/perl
-
-package output::buildfarm;
-
-use Exporter;
-@ISA = qw(Exporter);
-
-use FindBin qw($RealBin);
-use lib "$RealBin/..";
-
-use Subunit qw(parse_results);
-
-use strict;
-
-sub new($$$) {
-	my ($class) = @_;
-	my $self = {
-		test_output => {},
-		start_time => time()
-	};
-	bless($self, $class);
-}
-
-sub start_testsuite($$)
-{
-	my ($self, $name) = @_;
-	my $out = "";
-
-	$self->{NAME} = $name;
-	$self->{START_TIME} = time();
-
-	my $duration = $self->{START_TIME} - $self->{start_time};
-	$out .= "--==--==--==--==--==--==--==--==--==--==--\n";
-	$out .= "Running test $name (level 0 stdout)\n";
-	$out .= "--==--==--==--==--==--==--==--==--==--==--\n";
-	$out .= scalar(localtime())."\n";
-	$out .= "SELFTEST RUNTIME: " . $duration . "s\n";
-	$out .= "NAME: $name\n";
-
-	$self->{test_output}->{$name} = "";
-
-	print $out;
-}
-
-sub output_msg($$)
-{
-	my ($self, $output) = @_;
-
-	$self->{test_output}->{$self->{NAME}} .= $output;
-}
-
-sub control_msg($$)
-{
-	my ($self, $output) = @_;
-
-	$self->{test_output}->{$self->{NAME}} .= $output;
-}
-
-sub end_testsuite($$$$$$)
-{
-	my ($self, $name, $result, $unexpected, $reason) = @_;
-	my $out = "";
-
-	$out .= "TEST RUNTIME: " . (time() - $self->{START_TIME}) . "s\n";
-
-	if (not $unexpected) {
-		$out .= "ALL OK\n";
-	} else {
-		$out .= "ERROR: $reason\n";
-		$out .= $self->{test_output}->{$name};
-	}
-
-	$out .= "==========================================\n";
-	if (not $unexpected) {
-		$out .= "TEST PASSED: $name\n";
-	} else {
-		$out .= "TEST FAILED: $name (status $reason)\n";
-	}
-	$out .= "==========================================\n";
-
-	print $out;
-}
-
-sub start_test($$$)
-{
-	my ($self, $parents, $testname) = @_;
-
-	if ($#$parents == -1) {
-		$self->start_testsuite($testname);
-	}
-}
-
-sub end_test($$$$$)
-{
-	my ($self, $parents, $testname, $result, $unexpected, $reason) = @_;
-
-	if ($unexpected) {
-		$self->{test_output}->{$self->{NAME}} .= "UNEXPECTED($result): $testname\n";
-	}
-
-	if ($#$parents == -1) {
-		$self->end_testsuite($testname, $result, $unexpected, $reason); 
-	}
-}
-
-sub summary($)
-{
-	my ($self) = @_;
-
-	print "DURATION: " . (time() - $self->{start_time}) . " seconds\n";
-}
-
-sub skip_testsuite($$$$)
-{
-	my ($self, $name, $reason) = @_;
-
-	print "SKIPPED: $name\n";
-}
-
-1;
diff --git a/source4/selftest/output/html.pm b/source4/selftest/output/html.pm
deleted file mode 100644
index 1049527129c..00000000000
--- a/source4/selftest/output/html.pm
+++ /dev/null
@@ -1,354 +0,0 @@
-#!/usr/bin/perl
-
-package output::html;
-use Exporter;
-@ISA = qw(Exporter);
-
-use strict;
-use warnings;
-
-use FindBin qw($RealBin);
-use lib "$RealBin/..";
-
-use Subunit qw(parse_results);
-
-sub new($$$) {
-	my ($class, $dirname, $statistics) = @_;
-	my $self = { 
-		dirname => $dirname,
-		active_test => undef,
-		local_statistics => {},
-		statistics => $statistics,
-		msg => "",
-		error_summary => { 
-			skip => [],
-			expected_success => [],
-			unexpected_success => [],
-			expected_failure => [],
-			unexpected_failure => [],
-			skip_testsuites => [],
-			error => []
-		}
-	};
-
-	link("$RealBin/output/testresults.css", "$dirname/testresults.css");
-
-	open(INDEX, ">$dirname/index.html");
-
-	bless($self, $class);
-
-	$self->print_html_header("Samba Testsuite Run", *INDEX);
-
-	print INDEX "  <center>";
-	print INDEX "  <table>\n";
-	print INDEX "  <tr>\n";
-	print INDEX "    <td class=\"tableHead\">Test</td>\n";
-	print INDEX "    <td class=\"tableHead\">Result</td>\n";
-	print INDEX "  </tr>\n";
-
-	return $self;
-}
-
-sub print_html_header($$$)
-{
-	my ($self, $title, $fh) = @_;
-
-	print $fh "<html lang=\"en\">\n";
-	print $fh "<head>\n";
-	print $fh "  <title>$title</title>\n";
-	print $fh "  <link rel=\"stylesheet\" type=\"text/css\" href=\"testresults.css\"/>\n";
-	print $fh "</head>\n";
-	print $fh "<body>\n";
-	print $fh "<table width=\"100%\" border=\"0\" cellspacing=\"0\">\n";
-	print $fh "  <tr><td class=\"title\">$title</td></tr>\n";
-	print $fh "  <tr><td>\n";
-}
-
-sub print_html_footer($$)
-{
-	my ($self, $fh) = @_;
-
-	print $fh "</td></tr>\n";
-	print $fh "</table>\n";
-	print $fh "</body>\n";
-	print $fh "</html>\n";
-}
-
-sub output_msg($$);
-
-sub start_testsuite($$)
-{
-	my ($self, $name) = @_;
-
-	$self->{local_statistics} = {
-		success => 0,
-		skip => 0,
-		error => 0,
-		failure => 0
-	};
-
-	$self->{NAME} = $name;
-	$self->{HTMLFILE} = "$name.html";
-	$self->{HTMLFILE} =~ s/[:\t\n \/]/_/g;
-
-	open(TEST, ">$self->{dirname}/$self->{HTMLFILE}") or die("Unable to open $self->{HTMLFILE} for writing");
-
-	$self->print_html_header("Test Results for $name", *TEST);
-
-	print TEST "<h2>Tests</h2>\n";
-
-	print TEST "  <table>\n";
-}
-
-sub control_msg($$)
-{
-	my ($self, $output) = @_;
-
-	$self->{msg} .=  "<span class=\"control\">$output<br/></span>\n";
-}
-
-sub output_msg($$)
-{
-	my ($self, $output) = @_;
-
-	unless (defined($self->{active_test})) {
-		print TEST "$output<br/>";
-	} else {
-		$self->{msg} .= "$output<br/>";
-	}
-}
-
-sub end_testsuite($$$$)
-{
-	my ($self, $name, $result, $unexpected, $reason) = @_;
-
-	print TEST "</table>\n";
-
-	print TEST "<div class=\"duration\">Duration: " . (time() - $self->{START_TIME}) . "s</div>\n";
-
-	$self->print_html_footer(*TEST);
-
-	close(TEST);
-
-	print INDEX "<tr>\n";
-	print INDEX "  <td class=\"testSuite\"><a href=\"$self->{HTMLFILE}\">$name</a></td>\n";
-	my $st = $self->{local_statistics};
-
-	if (not $unexpected) {
-		if ($result eq "failure") {
-			print INDEX "  <td class=\"resultExpectedFailure\">";
-		} else {
-			print INDEX "  <td class=\"resultOk\">";
-		}
-	} else {
-		print INDEX "  <td class=\"resultFailure\">";
-	}
-
-	my $l = 0;
-	if ($st->{success} > 0) {
-		print INDEX "$st->{success} ok";
-		$l++;
-	}
-	if ($st->{skip} > 0) {
-		print INDEX ", " if ($l);
-		print INDEX "$st->{skip} skipped";
-		$l++;
-	}
-	if ($st->{failure} > 0) {
-		print INDEX ", " if ($l);
-		print INDEX "$st->{failure} failures";
-		$l++;
-	}
-	if ($st->{error} > 0) {
-		print INDEX ", " if ($l);
-		print INDEX "$st->{error} errors";
-		$l++;
-	}
-
-	if ($l == 0) {
-		if (not $unexpected) {
-			print INDEX "OK";
-		} else {
-			print INDEX "FAIL";
-		}
-	}
-
-	print INDEX "</td>";
-		
-	print INDEX "</tr>\n";
-}
-
-sub start_test($$)
-{
-	my ($self, $parents, $testname) = @_;
-
-	if ($#$parents == -1) {
-		$self->{START_TIME} = time();
-		$self->start_testsuite($testname);
-		return;
-	}
-
-	$self->{active_test} = $testname;
-	$self->{msg} = "";
-}
-
-sub end_test($$$$$$)
-{
-	my ($self, $parents, $testname, $result, $unexpected, $reason) = @_;
-
-	if ($#$parents == -1) {
-		$self->end_testsuite($testname, $result, $unexpected, $reason);
-		return;
-	}
-
-	print TEST "<tr>";
-
-	$self->{local_statistics}->{$result}++;
-
-	my $track_class;
-
-	if ($result eq "skip") {
-		print TEST "<td class=\"outputSkipped\">\n";
-		$track_class = "skip";
-	} elsif ($unexpected) {
-		print TEST "<td class=\"outputFailure\">\n";
-		if ($result eq "error") {
-			$track_class = "error";
-		} else {
-			$track_class = "unexpected_$result";
-		}
-	} else {
-		if ($result eq "failure") {
-			print TEST "<td class=\"outputExpectedFailure\">\n";
-		} else {
-			print TEST "<td class=\"outputOk\">\n";
-		}
-		$track_class = "expected_$result";
-	}
-
-	push(@{$self->{error_summary}->{$track_class}}, ,
-		 [$self->{HTMLFILE}, $testname, $self->{NAME}, 
-		  $reason]);
-
-	print TEST "<a name=\"$testname\"><h3>$testname</h3></a>\n";
-
-	print TEST $self->{msg};
-
-	if (defined($reason)) {
-		print TEST "<div class=\"reason\">$reason</div>\n";
-	}
-
-	print TEST "</td></tr>\n";
-
-	$self->{active_test} = undef;
-}
-
-sub summary($)
-{
-	my ($self) = @_;
-
-	my $st = $self->{statistics};
-	print INDEX "<tr>\n";
-	print INDEX "  <td class=\"testSuiteTotal\">Total</td>\n";
-
-	if ($st->{TESTS_UNEXPECTED_OK} == 0 and 
-	    $st->{TESTS_UNEXPECTED_FAIL} == 0 and
-		$st->{TESTS_ERROR} == 0) {
-		print INDEX "  <td class=\"resultOk\">";
-	} else {
-		print INDEX "  <td class=\"resultFailure\">";
-	}
-	print INDEX ($st->{TESTS_EXPECTED_OK} + $st->{TESTS_UNEXPECTED_OK}) . " ok";
-	if ($st->{TESTS_UNEXPECTED_OK} > 0) {
-		print INDEX " ($st->{TESTS_UNEXPECTED_OK} unexpected)";
-	}
-	if ($st->{TESTS_SKIP} > 0) {
-		print INDEX ", $st->{TESTS_SKIP} skipped";
-	}
-	if (($st->{TESTS_UNEXPECTED_FAIL} + $st->{TESTS_EXPECTED_FAIL}) > 0) {
-		print INDEX ", " . ($st->{TESTS_UNEXPECTED_FAIL} + $st->{TESTS_EXPECTED_FAIL}) . " failures";
-		if ($st->{TESTS_UNEXPECTED_FAIL} > 0) {
-			print INDEX " ($st->{TESTS_EXPECTED_FAIL} expected)";
-		}
-	}
-	if ($st->{TESTS_ERROR} > 0) {
-		print INDEX ", $st->{TESTS_ERROR} errors";
-	}
-
-	print INDEX "</td>";
-
-	print INDEX "</tr>\n";
-
-	print INDEX "</table>\n";
-	print INDEX "<a href=\"summary.html\">Summary</a>\n";
-	print INDEX "</center>\n";
-	$self->print_html_footer(*INDEX);
-	close(INDEX);
-
-	my $summ = $self->{error_summary};
-	open(SUMMARY, ">$self->{dirname}/summary.html");
-	$self->print_html_header("Summary", *SUMMARY);
-	sub print_table($$) {
-		my ($title, $list) = @_;
-		return if ($#$list == -1);
-		print SUMMARY "<h3>$title</h3>\n";
-		print SUMMARY "<table>\n";
-		print SUMMARY "<tr>\n";
-		print SUMMARY "  <td class=\"tableHead\">Testsuite</td>\n";
-		print SUMMARY "  <td class=\"tableHead\">Test</td>\n";
-		print SUMMARY "  <td class=\"tableHead\">Reason</td>\n";
-		print SUMMARY "</tr>\n";
-
-		foreach (@$list) {
-			print SUMMARY "<tr>\n";
-			print SUMMARY "  <td><a href=\"" . $$_[0] . "\">$$_[2]</a></td>\n";
-			print SUMMARY "  <td><a href=\"" . $$_[0] . "#$$_[1]\">$$_[1]</a></td>\n";
-			if (defined($$_[3])) {
-				print SUMMARY "  <td>$$_[3]</td>\n";
-			} else {
-				print SUMMARY "  <td></td>\n";
-			}
-			print SUMMARY "</tr>\n";
-		}
-
-		print SUMMARY "</table>";
-	}
-	print_table("Errors", $summ->{error});
-	print_table("Unexpected successes", $summ->{unexpected_success});
-	print_table("Unexpected failures", $summ->{unexpected_failure});
-	print_table("Skipped tests", $summ->{skip});
-	print_table("Expected failures", $summ->{expected_failure});
-
-	print SUMMARY "<h3>Skipped testsuites</h3>\n";
-	print SUMMARY "<table>\n";
-	print SUMMARY "<tr>\n";
-	print SUMMARY "  <td class=\"tableHead\">Testsuite</td>\n";
-	print SUMMARY "  <td class=\"tableHead\">Reason</td>\n";
-	print SUMMARY "</tr>\n";
-
-	foreach (@{$summ->{skip_testsuites}}) {
-		print SUMMARY "<tr>\n";
-		print SUMMARY "  <td>$$_[0]</td>\n";
-		if (defined($$_[1])) {
-			print SUMMARY "  <td>$$_[1]</td>\n";
-		} else {
-			print SUMMARY "  <td></td>\n";
-		}
-		print SUMMARY "</tr>\n";
-	}
-
-	print SUMMARY "</table>";
-
-	$self->print_html_footer(*SUMMARY);
-	close(SUMMARY);
-}
-
-sub skip_testsuite($$$$)
-{
-	my ($self, $name, $reason) = @_;
-
-	push (@{$self->{error_summary}->{skip_testsuites}}, 
-		  [$name, $reason]);
-}
-
-1;
diff --git a/source4/selftest/output/plain.pm b/source4/selftest/output/plain.pm
deleted file mode 100644
index 4bec4e0fdc1..00000000000
--- a/source4/selftest/output/plain.pm
+++ /dev/null
@@ -1,195 +0,0 @@
-#!/usr/bin/perl
-
-package output::plain;
-use Exporter;
-@ISA = qw(Exporter);
-
-use FindBin qw($RealBin);
-use lib "$RealBin/..";
-
-use strict;
-
-sub new($$$$$$$) {
-	my ($class, $summaryfile, $verbose, $immediate, $statistics, $totaltests) = @_;
-	my $self = { 
-		verbose => $verbose, 
-		immediate => $immediate, 
-		statistics => $statistics,
-		start_time => time(),
-		test_output => {},
-		suitesfailed => [],
-		suites_ok => 0,
-		skips => {},
-		summaryfile => $summaryfile,
-		index => 0,
-		totalsuites => $totaltests,
-	};
-	bless($self, $class);
-}
-
-sub output_msg($$);
-
-sub start_testsuite($$)
-{
-	my ($self, $name) = @_;
-
-	$self->{index}++;
-	$self->{NAME} = $name;
-	$self->{START_TIME} = time();
-
-	my $duration = $self->{START_TIME} - $self->{start_time};
-
-	$self->{test_output}->{$name} = "" unless($self->{verbose});
-
-	my $out = "";
-	$out .= "[$self->{index}/$self->{totalsuites} in ".$duration."s";
-	$out .= sprintf(", %d errors", ($#{$self->{suitesfailed}}+1)) if ($#{$self->{suitesfailed}} > -1);
-	$out .= "] $name"; 
-	if ($self->{immediate}) {
-		print "$out\n";
-	} else {
-		require Term::ReadKey;
-		my ($wchar, $hchar, $wpixels, $hpixels) = Term::ReadKey::GetTerminalSize();
-		foreach (1..$wchar) { $out.= " "; }
-		print "\r".substr($out, 0, $wchar);
-	}
-}
-
-sub output_msg($$)
-{
-	my ($self, $output) = @_;
-
-	if ($self->{verbose}) {
-		require FileHandle;
-		print $output;
-		STDOUT->flush();
-	} else {
-		$self->{test_output}->{$self->{NAME}} .= $output;
-	}
-}
-
-sub control_msg($$)
-{
-	my ($self, $output) = @_;
-
-	$self->output_msg($output);
-}
-
-sub end_testsuite($$$$$)
-{
-	my ($self, $name, $result, $unexpected, $reason) = @_;
-	my $out = "";
-
-	if ($unexpected) {
-		if ($result eq "success" and not defined($reason)) {
-			$reason = "Expected negative exit code, got positive exit code";
-		} 
-		$self->output_msg("ERROR: $reason\n");
-		push (@{$self->{suitesfailed}}, $name);
-	} else {
-		$self->{suites_ok}++;
-	}
-
-	if ($unexpected and $self->{immediate} and not $self->{verbose}) {
-		$out .= $self->{test_output}->{$name};
-	}
-
-
-	print $out;
-}
-
-sub start_test($$$)
-{
-	my ($self, $parents, $testname) = @_;
-
-	if ($#$parents == -1) {
-		$self->start_testsuite($testname);
-	}
-}
-
-sub end_test($$$$$)
-{
-	my ($self, $parents, $testname, $result, $unexpected, $reason) = @_;
-	
-	if ($#$parents == -1) {
-		$self->end_testsuite($testname, $result, $unexpected, $reason);
-		return;
-	}
-
-	my $append = "";
-
-	unless ($unexpected) {
-		$self->{test_output}->{$self->{NAME}} = "";
-		return;
-	}
-
-	my $fullname = join(".", @$parents).".$testname";
-
-	$append = "UNEXPECTED($result): $testname ($fullname)\n";
-
-	$self->{test_output}->{$self->{NAME}} .= $append;
-
-	if ($self->{immediate} and not $self->{verbose}) {
-		print $self->{test_output}->{$self->{NAME}};
-		$self->{test_output}->{$self->{NAME}} = "";
-	}
-}
-
-sub summary($)
-{
-	my ($self) = @_;
-
-	open(SUMMARY, ">$self->{summaryfile}");
-
-	if ($#{$self->{suitesfailed}} > -1) {
-		print SUMMARY "= Failed tests =\n";
-
-		foreach (@{$self->{suitesfailed}}) {
-			print SUMMARY "== $_ ==\n";
-			print SUMMARY $self->{test_output}->{$_}."\n\n";
-		}
-
-		print SUMMARY "\n";
-	}
-
-	if (not $self->{immediate} and not $self->{verbose}) {
-		foreach (@{$self->{suitesfailed}}) {
-			print "===============================================================================\n";
-			print "FAIL: $_\n";
-			print $self->{test_output}->{$_};
-			print "\n";
-		}
-	}
-
-	print SUMMARY "= Skipped tests =\n";
-	foreach my $reason (keys %{$self->{skips}}) {
-		print SUMMARY "$reason\n";
-		foreach my $name (@{$self->{skips}->{$reason}}) {
-			print SUMMARY "\t$name\n";
-		}
-		print SUMMARY "\n";
-	}
-	close(SUMMARY);
-
-	print "\nA summary with detailed informations can be found in:\n  $self->{summaryfile}\n";
-
-	if ($#{$self->{suitesfailed}} == -1) {
-		my $ok = $self->{statistics}->{TESTS_EXPECTED_OK} + 
-				 $self->{statistics}->{TESTS_EXPECTED_FAIL};
-		print "\nALL OK ($ok tests in $self->{suites_ok} testsuites)\n";
-	} else {
-		print "\nFAILED ($self->{statistics}->{TESTS_UNEXPECTED_FAIL} failures and $self->{statistics}->{TESTS_ERROR} errors in ". ($#{$self->{suitesfailed}}+1) ." testsuites)\n";
-	}
-
-}
-
-sub skip_testsuite($$)
-{
-	my ($self, $name, $reason) = @_;
-
-	push (@{$self->{skips}->{$reason}}, $name);
-
-	$self->{totalsuites}--;
-}
-
-1;
diff --git a/source4/selftest/output/testresults.css b/source4/selftest/output/testresults.css
deleted file mode 100644
index 66d1d6b2ad2..00000000000
--- a/source4/selftest/output/testresults.css
+++ /dev/null
@@ -1,129 +0,0 @@
-/* Stylesheet for Samba test results. 
- *
- * Partially based on the CSS file from lcov.
- */
-
-/* All views: main title format */
-td.title
-{
-	text-align:     center;
-	padding-bottom: 10px;
-	font-family:    sans-serif;
-	font-size:      20pt;
-	font-style:     italic;
-	font-weight:    bold;
-}
-
-/* Index table headers */
-td.tableHead
-{
-	text-align:       center;
-	color:            #FFFFFF;
-	background-color: #6688D4;
-	font-family:      sans-serif;
-	font-size:        120%;
-	font-weight:      bold;
-}
-
-/* Testsuite names */
-td.testSuite
-{
-	text-align:       left;
-	padding-left:     10px;
-	padding-right:    20px; 
-	color:            #284FA8;
-	background-color: #DAE7FE;
-	font-family:      monospace;
-}
-
-/* Successful */
-td.resultOk
-{
-	text-align:       right;
-	padding-left:     10px;
-	padding-right:    10px;
-	background-color: #A7FC9D;
-	font-weight:      bold;
-}
-
-/* Failure */
-td.resultFailure
-{
-	text-align:       right;
-	padding-left:     10px;
-	padding-right:    10px;
-	background-color: #FF0000;
-	font-weight:      bold;
-}
-
-/* Expected failure */
-td.resultExpectedFailure
-{
-	text-align:       right;
-	padding-left:     10px;
-	padding-right:    10px;
-	background-color: #FFA500;
-	font-weight:      bold;
-}
-
-/* Skipped */
-td.resultSkipped
-{
-	text-align:       center;
-	padding-left:     10px;
-	padding-right:    10px;
-	background-color: #FFEA20;
-	font-weight:      bold;
-}
-
-td.duration
-{
-	text-align: right;
-}
-
-td.durationSkipped
-{
-	text-align: right;
-}
-
-td.outputSkipped
-{
-	background-color: #FFEA20;
-}
-
-td.outputOk
-{
-	background-color: #A7FC9D;
-}
-
-td.outputFailure
-{
-	background-color: #FF0000;
-}
-
-td.outputExpectedFailure
-{
-	background-color: #FFA500;
-}
-
-div.reason
-{
-	text-align: center;
-	font-weight: bold;
-}
-
-span.control
-{
-	display: none;
-}
-
-div.duration
-{
-	text-align: right;
-	font-weight: bold;
-}
-
-div.command
-{
-	background-color: gray;
-}
diff --git a/source4/selftest/quick b/source4/selftest/quick
new file mode 100644
index 00000000000..3627a87bbe5
--- /dev/null
+++ b/source4/selftest/quick
@@ -0,0 +1,37 @@
+# This file contains regexes matching the tests that should be run 
+# when doing a "quicktest" - verifying whether the build is working 
+# rather than trying to see what exactly is broken.
+#
+# This should be as quick as possible but cover as much code as possible.
+base.unlink
+base.attr
+base.delete
+base.tcon
+base.open
+base.chkpath
+raw.qfsinfo
+raw.qfileinfo
+raw.sfileinfo
+raw.mkdir
+raw.seek
+raw.open
+raw.write
+raw.unlink
+raw.read
+raw.close
+raw.ioctl
+raw.rename
+raw.eas
+raw.streams
+base.open 
+rpc.altercontext
+rpc.join
+rpc.echo
+rpc.schannel
+rpc.netlogon
+rpc.unixinfo
+rpc.handles
+rpc.altercontext
+rpc.join
+rpc.handles
+rpc.echo
diff --git a/source4/selftest/selftest.pl b/source4/selftest/selftest.pl
deleted file mode 100755
index e86ccbe468c..00000000000
--- a/source4/selftest/selftest.pl
+++ /dev/null
@@ -1,874 +0,0 @@
-#!/usr/bin/perl
-# Bootstrap Samba and run a number of tests against it.
-# Copyright (C) 2005-2008 Jelmer Vernooij <jelmer@samba.org>
-# Published under the GNU GPL, v3 or later.
-
-=pod
-
-=head1 NAME
-
-selftest - Samba test runner
-
-=head1 SYNOPSIS
-
-selftest --help
-
-selftest [--srcdir=DIR] [--builddir=DIR] [--target=samba4|samba3|win|kvm] [--socket-wrapper] [--quick] [--exclude=FILE] [--include=FILE] [--one] [--prefix=prefix] [--immediate] [--testlist=FILE] [TESTS]
-
-=head1 DESCRIPTION
-
-A simple test runner. TESTS is a regular expression with tests to run.
-
-=head1 OPTIONS
-
-=over 4
-
-=item I<--help>
-
-Show list of available options.
-
-=item I<--srcdir=DIR>
-
-Source directory.
-
-=item I<--builddir=DIR>
-
-Build directory.
-
-=item I<--prefix=DIR>
-
-Change directory to run tests in. Default is 'st'.
-
-=item I<--immediate>
-
-Show errors as soon as they happen rather than at the end of the test run.
-		
-=item I<--target samba4|samba3|win|kvm>
-
-Specify test target against which to run. Default is 'samba4'.
-
-=item I<--quick>
-
-Run only a limited number of tests. Intended to run in about 30 seconds on 
-moderately recent systems.
-		
-=item I<--socket-wrapper>
-
-Use socket wrapper library for communication with server. Only works 
-when the server is running locally.
-
-Will prevent TCP and UDP ports being opened on the local host but 
-(transparently) redirects these calls to use unix domain sockets.
-
-=item I<--expected-failures>
-
-Specify a file containing a list of tests that are expected to fail. Failures for 
-these tests will be counted as successes, successes will be counted as failures.
-
-The format for the file is, one entry per line:
-
-TESTSUITE-NAME.TEST-NAME
-
-The reason for a test can also be specified, by adding a hash sign (#) and the reason 
-after the test name.
-
-=item I<--exclude>
-
-Specify a file containing a list of tests that should be skipped. Possible 
-candidates are tests that segfault the server, flip or don't end. The format of this file is the same as 
-for the --expected-failures flag.
-
-=item I<--include>
-
-Specify a file containing a list of tests that should be run. Same format 
-as the --exclude flag.
-
-Not includes specified means all tests will be run.
-
-=item I<--one>
-
-Abort as soon as one test fails.
-
-=item I<--testlist>
-
-Load a list of tests from the specified location.
-
-=back
-
-=head1 ENVIRONMENT
-
-=over 4
-
-=item I<SMBD_VALGRIND>
-
-=item I<TORTURE_MAXTIME>
-
-=item I<VALGRIND>
-
-=item I<TLS_ENABLED>
-
-=item I<srcdir>
-
-=back
-
-=head1 LICENSE
-
-selftest is licensed under the GNU General Public License L<http://www.gnu.org/licenses/gpl.html>.
-
-=head1 AUTHOR
-
-Jelmer Vernooij
-
-=cut
-
-use strict;
-
-use FindBin qw($RealBin $Script);
-use File::Spec;
-use Getopt::Long;
-use POSIX;
-use Cwd qw(abs_path);
-use lib "$RealBin";
-use Subunit qw(parse_results);
-use SocketWrapper;
-
-my $opt_help = 0;
-my $opt_target = "samba4";
-my $opt_quick = 0;
-my $opt_socket_wrapper = 0;
-my $opt_socket_wrapper_pcap = undef;
-my $opt_socket_wrapper_keep_pcap = undef;
-my $opt_one = 0;
-my $opt_immediate = 0;
-my $opt_expected_failures = undef;
-my @opt_exclude = ();
-my @opt_include = ();
-my $opt_verbose = 0;
-my $opt_image = undef;
-my $opt_testenv = 0;
-my $ldap = undef;
-my $opt_analyse_cmd = undef;
-my $opt_resetup_env = undef;
-my $opt_bindir = undef;
-my $opt_no_lazy_setup = undef;
-my $opt_format = "plain";
-my @testlists = ();
-
-my $srcdir = ".";
-my $builddir = ".";
-my $prefix = "./st";
-
-my @expected_failures = ();
-my @includes = ();
-my @excludes = ();
-
-my $statistics = {
-	SUITES_FAIL => 0,
-
-	TESTS_UNEXPECTED_OK => 0,
-	TESTS_EXPECTED_OK => 0,
-	TESTS_UNEXPECTED_FAIL => 0,
-	TESTS_EXPECTED_FAIL => 0,
-	TESTS_ERROR => 0,
-	TESTS_SKIP => 0,
-};
-
-sub find_in_list($$)
-{
-	my ($list, $fullname) = @_;
-
-	foreach (@$list) {
-		if ($fullname =~ /$$_[0]/) {
-			 return ($$_[1]) if ($$_[1]);
-			 return "NO REASON SPECIFIED";
-		}
-	}
-
-	return undef;
-}
-
-sub expecting_failure($)
-{
-	my ($name) = @_;
-	return find_in_list(\@expected_failures, $name);
-}
-
-sub skip($)
-{
-	my ($name) = @_;
-
-	return find_in_list(\@excludes, $name);
-}
-
-sub getlog_env($);
-
-sub setup_pcap($)
-{
-	my ($name) = @_;
-
-	return unless ($opt_socket_wrapper_pcap);
-	return unless defined($ENV{SOCKET_WRAPPER_PCAP_DIR});
-
-	my $fname = $name;
-	$fname =~ s%[^abcdefghijklmnopqrstuvwxyzABCDEFGHIJKLMNOPQRSTUVWXYZ0123456789\-]%_%g;
-
-	my $pcap_file = "$ENV{SOCKET_WRAPPER_PCAP_DIR}/$fname.pcap";
-
-	SocketWrapper::setup_pcap($pcap_file);
-
-	return $pcap_file;
-}
-
-sub cleanup_pcap($$$)
-{
-	my ($pcap_file, $expected_ret, $ret) = @_;
-
-	return unless ($opt_socket_wrapper_pcap);
-	return if ($opt_socket_wrapper_keep_pcap);
-	return unless ($expected_ret == $ret);
-	return unless defined($pcap_file);
-
-	unlink($pcap_file);
-}
-
-sub run_testsuite($$$$$$)
-{
-	my ($envname, $name, $cmd, $i, $totalsuites, $msg_ops) = @_;
-	my $pcap_file = setup_pcap($name);
-
-	$msg_ops->start_test([], $name);
-
-	unless (open(RESULT, "$cmd 2>&1|")) {
-		$statistics->{TESTS_ERROR}++;
-		$msg_ops->end_test([], $name, "error", 1, "Unable to run $cmd: $!");
-		$statistics->{SUITES_FAIL}++;
-		return 0;
-	}
-
-	my $expected_ret = parse_results(
-		$msg_ops, $statistics, *RESULT, \&expecting_failure, [$name]);
-
-	my $envlog = getlog_env($envname);
-	$msg_ops->output_msg("ENVLOG: $envlog\n") if ($envlog ne "");
-
-	$msg_ops->output_msg("CMD: $cmd\n");
-
-	my $ret = close(RESULT);
-	$ret = 0 unless $ret == 1;
-
-	my $exitcode = $? >> 8;
-
-	if ($ret == 1) {
-		$msg_ops->end_test([], $name, "success", $expected_ret != $ret, undef); 
-	} else {
-		$msg_ops->end_test([], $name, "failure", $expected_ret != $ret, "Exit code was $exitcode");
-	}
-
-	cleanup_pcap($pcap_file, $expected_ret, $ret);
-
-	if (not $opt_socket_wrapper_keep_pcap and defined($pcap_file)) {
-		$msg_ops->output_msg("PCAP FILE: $pcap_file\n");
-	}
-
-	if ($ret != $expected_ret) {
-		$statistics->{SUITES_FAIL}++;
-		exit(1) if ($opt_one);
-	}
-
-	return ($ret == $expected_ret);
-}
-
-sub ShowHelp()
-{
-	print "Samba test runner
-Copyright (C) Jelmer Vernooij <jelmer\@samba.org>
-
-Usage: $Script [OPTIONS] PREFIX
-
-Generic options:
- --help                     this help page
- --target=samba[34]|win|kvm Samba version to target
- --testlist=FILE			file to read available tests from
-
-Paths:
- --prefix=DIR               prefix to run tests in [st]
- --srcdir=DIR               source directory [.]
- --builddir=DIR             output directory [.]
-
-Target Specific:
- --socket-wrapper-pcap		save traffic to pcap directories
- --socket-wrapper-keep-pcap keep all pcap files, not just those for tests that 
-                            failed
- --socket-wrapper           enable socket wrapper
- --expected-failures=FILE   specify list of tests that is guaranteed to fail
-
-Samba4 Specific:
- --ldap=openldap|fedora-ds     back smbd onto specified ldap server
-
-Samba3 Specific:
- --bindir=PATH              path to binaries
-
-Kvm Specific:
- --image=PATH               path to KVM image
-
-Behaviour:
- --quick                    run quick overall test
- --one                      abort when the first test fails
- --immediate                print test output for failed tests during run
- --verbose                  be verbose
- --analyse-cmd CMD          command to run after each test
-";
-	exit(0);
-}
-
-my $result = GetOptions (
-		'help|h|?' => \$opt_help,
-		'target=s' => \$opt_target,
-		'prefix=s' => \$prefix,
-		'socket-wrapper' => \$opt_socket_wrapper,
-		'socket-wrapper-pcap' => \$opt_socket_wrapper_pcap,
-		'socket-wrapper-keep-pcap' => \$opt_socket_wrapper_keep_pcap,
-		'quick' => \$opt_quick,
-		'one' => \$opt_one,
-		'immediate' => \$opt_immediate,
-		'expected-failures=s' => \$opt_expected_failures,
-		'exclude=s' => \@opt_exclude,
-		'include=s' => \@opt_include,
-		'srcdir=s' => \$srcdir,
-		'builddir=s' => \$builddir,
-		'verbose' => \$opt_verbose,
-		'testenv' => \$opt_testenv,
-		'ldap:s' => \$ldap,
-		'analyse-cmd=s' => \$opt_analyse_cmd,
-		'no-lazy-setup' => \$opt_no_lazy_setup,
-		'resetup-environment' => \$opt_resetup_env,
-		'bindir:s' => \$opt_bindir,
-		'format=s' => \$opt_format,
-		'image=s' => \$opt_image,
-		'testlist=s' => \@testlists
-	    );
-
-exit(1) if (not $result);
-
-ShowHelp() if ($opt_help);
-
-my $tests = shift;
-
-# quick hack to disable rpc validation when using valgrind - its way too slow
-unless (defined($ENV{VALGRIND})) {
-	$ENV{VALIDATE} = "validate";
-	$ENV{MALLOC_CHECK_} = 2;
-}
-
-my $old_pwd = "$RealBin/..";
-
-# Backwards compatibility:
-if (defined($ENV{TEST_LDAP}) and $ENV{TEST_LDAP} eq "yes") {
-	if (defined($ENV{FEDORA_DS_ROOT})) {
-		$ldap = "fedora-ds";
-	} else {
-		$ldap = "openldap";
-	}
-}
-
-my $torture_maxtime = ($ENV{TORTURE_MAXTIME} or 1200);
-if ($ldap) {
-	# LDAP is slow
-	$torture_maxtime *= 2;
-}
-
-$prefix =~ s+//+/+;
-$prefix =~ s+/./+/+;
-$prefix =~ s+/$++;
-
-die("using an empty prefix isn't allowed") unless $prefix ne "";
-
-#Ensure we have the test prefix around
-mkdir($prefix, 0777) unless -d $prefix;
-
-my $prefix_abs = abs_path($prefix);
-my $srcdir_abs = abs_path($srcdir);
-
-die("using an empty absolute prefix isn't allowed") unless $prefix_abs ne "";
-die("using '/' as absolute prefix isn't allowed") unless $prefix_abs ne "/";
-
-$ENV{PREFIX} = $prefix;
-$ENV{KRB5CCNAME} = "$prefix/krb5ticket";
-$ENV{PREFIX_ABS} = $prefix_abs;
-$ENV{SRCDIR} = $srcdir;
-$ENV{SRCDIR_ABS} = $srcdir_abs;
-
-if (defined($ENV{RUN_FROM_BUILD_FARM}) and 
-	($ENV{RUN_FROM_BUILD_FARM} eq "yes")) {
-	$opt_format = "buildfarm";
-}
-
-my $tls_enabled = not $opt_quick;
-$ENV{TLS_ENABLED} = ($tls_enabled?"yes":"no");
-$ENV{LDB_MODULES_PATH} = "$old_pwd/bin/modules/ldb";
-$ENV{LD_SAMBA_MODULE_PATH} = "$old_pwd/bin/modules";
-sub prefix_pathvar($$)
-{
-	my ($name, $newpath) = @_;
-	if (defined($ENV{$name})) {
-		$ENV{$name} = "$newpath:$ENV{$name}";
-	} else {
-		$ENV{$name} = $newpath;
-	}
-}
-prefix_pathvar("PKG_CONFIG_PATH", "$old_pwd/bin/pkgconfig");
-# Required for smbscript:
-prefix_pathvar("PATH", "$old_pwd/bin");
-prefix_pathvar("PYTHONPATH", "$old_pwd/bin/python");
-
-if ($opt_socket_wrapper_keep_pcap) {
-	# Socket wrapper keep pcap implies socket wrapper pcap
-	$opt_socket_wrapper_pcap = 1;
-}
-
-if ($opt_socket_wrapper_pcap) {
-	# Socket wrapper pcap implies socket wrapper
-	$opt_socket_wrapper = 1;
-}
-
-my $socket_wrapper_dir;
-if ($opt_socket_wrapper) {
-	$socket_wrapper_dir = SocketWrapper::setup_dir("$prefix/w", $opt_socket_wrapper_pcap);
-	print "SOCKET_WRAPPER_DIR=$socket_wrapper_dir\n";
-} else {
-	warn("Not using socket wrapper, but also not running as root. Will not be able to listen on proper ports") unless $< == 0;
-}
-
-my $target;
-my $testenv_default = "none";
-
-if ($opt_target eq "samba4") {
-	$testenv_default = "member";
-	require target::Samba4;
-	$target = new Samba4($opt_bindir or "$srcdir/bin", $ldap, "$srcdir/setup");
-} elsif ($opt_target eq "samba3") {
-	if ($opt_socket_wrapper and `$opt_bindir/smbd -b | grep SOCKET_WRAPPER` eq "") {
-		die("You must include --enable-socket-wrapper when compiling Samba in order to execute 'make test'.  Exiting....");
-	}
-	$testenv_default = "dc";
-	require target::Samba3;
-	$target = new Samba3($opt_bindir);
-} elsif ($opt_target eq "win") {
-	die("Windows tests will not run with socket wrapper enabled.") 
-		if ($opt_socket_wrapper);
-	$testenv_default = "dc";
-	require target::Windows;
-	$target = new Windows();
-} elsif ($opt_target eq "kvm") {
-	die("Kvm tests will not run with socket wrapper enabled.") 
-		if ($opt_socket_wrapper);
-	require target::Kvm;
-	die("No image specified") unless ($opt_image);
-	$target = new Kvm($opt_image, undef);
-}
-
-#
-# Start a Virtual Distributed Ethernet Switch
-# Returns the pid of the switch.
-#
-sub start_vde_switch($)
-{
-	my ($path) = @_;
-
-	system("vde_switch --pidfile $path/vde.pid --sock $path/vde.sock --daemon");
-
-	open(PID, "$path/vde.pid");
-	<PID> =~ /([0-9]+)/;
-	my $pid = $1;
-	close(PID);
-
-	return $pid;
-}
-
-# Stop a Virtual Distributed Ethernet Switch
-sub stop_vde_switch($)
-{
-	my ($pid) = @_;
-	kill 9, $pid;
-}
-
-sub read_test_regexes($)
-{
-	my ($name) = @_;
-	my @ret = ();
-	open(LF, "<$name") or die("unable to read $name: $!");
-	while (<LF>) { 
-		chomp; 
-		next if (/^#/);
-		if (/^(.*?)([ \t]+)\#([\t ]*)(.*?)$/) {
-			push (@ret, [$1, $4]);
-		} else {
-			s/^(.*?)([ \t]+)\#([\t ]*)(.*?)$//;
-			push (@ret, [$_, undef]); 
-		}
-	}
-	close(LF);
-	return @ret;
-}
-
-if (defined($opt_expected_failures)) {
-	@expected_failures = read_test_regexes($opt_expected_failures);
-}
-
-foreach (@opt_exclude) {
-	push (@excludes, read_test_regexes($_));
-}
-
-if ($opt_quick) {
-	push (@includes, read_test_regexes("samba4-quick"));
-}
-
-foreach (@opt_include) {
-	push (@includes, read_test_regexes($_));
-}
-
-my $interfaces = join(',', ("127.0.0.6/8", 
-			    "127.0.0.7/8",
-			    "127.0.0.8/8",
-			    "127.0.0.9/8",
-			    "127.0.0.10/8",
-			    "127.0.0.11/8"));
-
-my $conffile = "$prefix_abs/client/client.conf";
-
-sub write_clientconf($$)
-{
-	my ($conffile, $vars) = @_;
-
-	mkdir("$prefix/client", 0777) unless -d "$prefix/client";
-	
-	if ( -d "$prefix/client/private" ) {
-	        unlink <$prefix/client/private/*>;
-	} else {
-	        mkdir("$prefix/client/private", 0777);
-	}
-
-	open(CF, ">$conffile");
-	print CF "[global]\n";
-	if (defined($ENV{VALGRIND})) {
-		print CF "\ticonv:native = true\n";
-	} else {
-		print CF "\ticonv:native = false\n";
-	}
-	print CF "\tnetbios name = client\n";
-	if (defined($vars->{DOMAIN})) {
-		print CF "\tworkgroup = $vars->{DOMAIN}\n";
-	}
-	if (defined($vars->{REALM})) {
-		print CF "\trealm = $vars->{REALM}\n";
-	}
-	if (defined($vars->{NCALRPCDIR})) {
-		print CF "\tncalrpc dir = $vars->{NCALRPCDIR}\n";
-	}
-	if (defined($vars->{PIDDIR})) {
-		print CF "\tpid directory = $vars->{PIDDIR}\n";
-	}
-	if (defined($vars->{WINBINDD_SOCKET_DIR})) {
-		print CF "\twinbindd socket directory = $vars->{WINBINDD_SOCKET_DIR}\n";
-	}
-	if ($opt_socket_wrapper) {
-		print CF "\tinterfaces = $interfaces\n";
-	}
-	print CF "
-	private dir = $prefix_abs/client/private
-	js include = $srcdir_abs/scripting/libjs
-	name resolve order = bcast
-	panic action = $srcdir_abs/script/gdb_backtrace \%PID\% \%PROG\%
-	max xmit = 32K
-	notify:inotify = false
-	ldb:nosync = true
-	system:anonymous = true
-	torture:basedir = $prefix_abs/client
-#We don't want to pass our self-tests if the PAC code is wrong
-	gensec:require_pac = true
-	modules dir = $ENV{LD_SAMBA_MODULE_PATH}
-";
-	close(CF);
-}
-
-my @torture_options = ();
-push (@torture_options, "--configfile=$conffile");
-# ensure any one smbtorture call doesn't run too long
-push (@torture_options, "--maximum-runtime=$torture_maxtime");
-push (@torture_options, "--target=$opt_target");
-push (@torture_options, "--basedir=$prefix_abs");
-push (@torture_options, "--option=torture:progress=no") unless ($opt_verbose);
-push (@torture_options, "--format=subunit");
-push (@torture_options, "--option=torture:quick=yes") if ($opt_quick);
-
-$ENV{TORTURE_OPTIONS} = join(' ', @torture_options);
-print "OPTIONS $ENV{TORTURE_OPTIONS}\n";
-
-my @todo = ();
-
-my $testsdir = "$srcdir/selftest";
-$ENV{SMB_CONF_PATH} = "$conffile";
-$ENV{CONFIGURATION} = "--configfile=$conffile";
-
-my %required_envs = ();
-
-sub read_testlist($)
-{
-	my ($filename) = @_;
-
-	my @ret = ();
-	open(IN, $filename) or die("Unable to open $filename: $!");
-
-	while (<IN>) {
-		if ($_ eq "-- TEST --\n") {
-			my $name = <IN>;
-			$name =~ s/\n//g;
-			my $env = <IN>;
-			$env =~ s/\n//g;
-			my $cmdline = <IN>;
-			$cmdline =~ s/\n//g;
-			if (not defined($tests) or $name =~ /$tests/) {
-				$required_envs{$env} = 1;
-				push (@ret, [$name, $env, $cmdline]);
-			}
-		} else {
-			print;
-		}
-	}
-	close(IN) or die("Error creating recipe");
-	return @ret;
-}
-
-if ($#testlists == -1) {
-	die("No testlists specified");
-}
-
-my @available = ();
-foreach my $fn (@testlists) {
-	foreach (read_testlist($fn)) {
-		my $name = $$_[0];
-		next if (@includes and not find_in_list(\@includes, $name));
-		push (@available, $_);
-	}
-}
-
-my $msg_ops;
-if ($opt_format eq "buildfarm") {
-	require output::buildfarm;
-	$msg_ops = new output::buildfarm($statistics);
-} elsif ($opt_format eq "plain") {
-	require output::plain;
-	$msg_ops = new output::plain("$prefix/summary", $opt_verbose, $opt_immediate, $statistics, $#available+1);
-} elsif ($opt_format eq "html") {
-	require output::html;
-	mkdir("test-results", 0777);
-	$msg_ops = new output::html("test-results", $statistics);
-} else {
-	die("Invalid output format '$opt_format'");
-}
-
-
-foreach (@available) {
-	my $name = $$_[0];
-	my $skipreason = skip($name);
-	if ($skipreason) {
-		$msg_ops->skip_testsuite($name, $skipreason);
-	} else {
-		push(@todo, $_); 
-	}
-}
-
-if ($#todo == -1) {
-	print STDERR "No tests to run\n";
-	exit(1);
-	}
-
-my $suitestotal = $#todo + 1;
-my $i = 0;
-$| = 1;
-
-my %running_envs = ();
-
-my @exported_envvars = (
-	# domain stuff
-	"DOMAIN",
-	"REALM",
-
-	# domain controller stuff
-	"DC_SERVER",
-	"DC_SERVER_IP",
-	"DC_NETBIOSNAME",
-	"DC_NETBIOSALIAS",
-
-	# server stuff
-	"SERVER",
-	"SERVER_IP",
-	"NETBIOSNAME",
-	"NETBIOSALIAS",
-
-	# user stuff
-	"USERNAME",
-	"PASSWORD",
-	"DC_USERNAME",
-	"DC_PASSWORD",
-
-	# misc stuff
-	"KRB5_CONFIG",
-	"WINBINDD_SOCKET_DIR",
-	"WINBINDD_PRIV_PIPE_DIR"
-);
-
-$SIG{INT} = $SIG{QUIT} = $SIG{TERM} = sub { 
-	my $signame = shift;
-	teardown_env($_) foreach(keys %running_envs);
-	die("Received signal $signame");
-};
-
-sub setup_env($)
-{
-	my ($envname) = @_;
-
-	my $testenv_vars;
-	if ($envname eq "none") {
-		$testenv_vars = {};
-	} elsif (defined($running_envs{$envname})) {
-		$testenv_vars = $running_envs{$envname};
-		if (not $target->check_env($testenv_vars)) {
-			$testenv_vars = undef;
-		}
-	} else {
-		$testenv_vars = $target->setup_env($envname, $prefix);
-	}
-
-	return undef unless defined($testenv_vars);
-
-	$running_envs{$envname} = $testenv_vars;
-
-	SocketWrapper::set_default_iface(6);
-	write_clientconf($conffile, $testenv_vars);
-
-	foreach (@exported_envvars) {
-		if (defined($testenv_vars->{$_})) {
-			$ENV{$_} = $testenv_vars->{$_};
-		} else {
-			delete $ENV{$_};
-		}
-	}
-
-	return $testenv_vars;
-}
-
-sub exported_envvars_str($)
-{
-	my ($testenv_vars) = @_;
-	my $out = "";
-
-	foreach (@exported_envvars) {
-		next unless defined($testenv_vars->{$_});
-		$out .= $_."=".$testenv_vars->{$_}."\n";
-	}
-
-	return $out;
-}
-
-sub getlog_env($)
-{
-	my ($envname) = @_;
-	return "" if ($envname eq "none");
-	return $target->getlog_env($running_envs{$envname});
-}
-
-sub check_env($)
-{
-	my ($envname) = @_;
-	return 1 if ($envname eq "none");
-	return $target->check_env($running_envs{$envname});
-}
-
-sub teardown_env($)
-{
-	my ($envname) = @_;
-	return if ($envname eq "none");
-	$target->teardown_env($running_envs{$envname});
-	delete $running_envs{$envname};
-}
-
-if ($opt_no_lazy_setup) {
-	setup_env($_) foreach (keys %required_envs);
-}
-
-if ($opt_testenv) {
-	my $testenv_name = $ENV{SELFTEST_TESTENV};
-	$testenv_name = $testenv_default unless defined($testenv_name);
-
-	my $testenv_vars = setup_env($testenv_name);
-
-	$ENV{PIDDIR} = $testenv_vars->{PIDDIR};
-
-	my $envvarstr = exported_envvars_str($testenv_vars);
-
-	my $term = ($ENV{TERM} or "xterm");
-	system("$term -e 'echo -e \"
-Welcome to the Samba4 Test environment '$testenv_name'
-
-This matches the client environment used in make test
-smbd is pid `cat \$PIDDIR/smbd.pid`
-
-Some useful environment variables:
-TORTURE_OPTIONS=\$TORTURE_OPTIONS
-CONFIGURATION=\$CONFIGURATION
-
-$envvarstr
-\" && LD_LIBRARY_PATH=$ENV{LD_LIBRARY_PATH} bash'");
-	teardown_env($testenv_name);
-} else {
-	foreach (@todo) {
-		$i++;
-		my $cmd = $$_[2];
-		$cmd =~ s/([\(\)])/\\$1/g;
-		my $name = $$_[0];
-		my $envname = $$_[1];
-		
-		my $envvars = setup_env($envname);
-		if (not defined($envvars)) {
-			$msg_ops->skip_testsuite($name, "unable to set up environment $envname");
-			next;
-		}
-
-		run_testsuite($envname, $name, $cmd, $i, $suitestotal, 
-		              $msg_ops);
-
-		if (defined($opt_analyse_cmd)) {
-			system("$opt_analyse_cmd \"$name\"");
-		}
-
-		teardown_env($envname) if ($opt_resetup_env);
-	}
-}
-
-print "\n";
-
-teardown_env($_) foreach (keys %running_envs);
-
-$target->stop();
-
-$msg_ops->summary();
-
-my $failed = 0;
-
-# if there were any valgrind failures, show them
-foreach (<$prefix/valgrind.log*>) {
-	next unless (-s $_);
-	system("grep DWARF2.CFI.reader $_ > /dev/null");
-	if ($? >> 8 == 0) {
-	    print "VALGRIND FAILURE\n";
-	    $failed++;
-	    system("cat $_");
-	}
-}
-
-if ($opt_format eq "buildfarm") {
-	print "TEST STATUS: $statistics->{SUITES_FAIL}\n";
-}
-
-exit $statistics->{SUITES_FAIL};
diff --git a/source4/selftest/skip b/source4/selftest/skip
new file mode 100644
index 00000000000..b1313adea0c
--- /dev/null
+++ b/source4/selftest/skip
@@ -0,0 +1,63 @@
+# This file contains a list of regular expressions matching testsuites that 
+# should be skipped during "make test".
+#
+# Possible reasons for adding a testsuite here:
+# * Testsuite functionality not implemented on the server side
+# * Testsuite crashes during run
+# * Testsuite crashes server
+# * Testsuite contains "flapping" tests (sometimes success, sometimes failure)
+# * Testsuite hangs indefinitely
+#
+# If a testsuite is partially succeeding, please list the failing bits 
+# in the samba4-knownfail file rather than disabling the testsuite completely.
+#
+# If a testsuite is very slow, please add it to samba4-slow instead.
+#
+# Please add a comment for each testsuite you disable explaining why 
+# it is being skipped.
+raw.composite
+base.iometer
+base.casetable
+base.nttrans
+base.scan.maxfid
+raw.hold.oplock		# Not a test, but a way to block other clients for a test
+raw.ping.pong		# Needs second server to test
+rpc.samr_accessmask
+raw.scan.eamax
+samba4.ntvfs.cifs.raw.qfileinfo.ipc
+smb2.notify
+smb2.scan
+ntvfs.cifs.base.charset
+ntvfs.cifs.base.iometer
+ntvfs.cifs.base.casetable
+ntvfs.cifs.base.nttrans
+ntvfs.cifs.base.scan-maxfid
+ntvfs.cifs.base.utable
+ntvfs.cifs.base.smb
+ntvfs.cifs.raw.composite
+ntvfs.cifs.raw.notify
+ntvfs.cifs.raw.scan-eamax
+ntvfs.cifs.raw.context
+ntvfs.cifs.raw.qfileinfo.ipc
+rpc.dssync
+rpc.samsync
+ldap.uptodatevector					# Segfaults
+rpc.remact							# Not provided by Samba 4
+rpc.oxidresolve						# Not provided by Samba 4
+rpc.eventlog						# Not provided by Samba 4
+rpc.initshutdown					# Not provided by Samba 4
+rpc.svcctl							# Not provided by Samba 4
+rpc.atsvc							# Not provided by Samba 4
+rpc.frsapi							# Not provided by Samba 4
+^samba4.base.samba3.*						# Samba3-specific test
+^samba4.ntvfs.cifs.base.samba3.*				# Samba3-specific test
+^samba4.raw.samba3.*						# Samba3-specific test
+^samba4.ntvfs.cifs.raw.samba3.*					# Samba3-specific test
+samba4.ntvfs.cifs.raw.
+^samba4.rpc..*samba3.*						# Samba3-specific test
+^samba4.net.domopen.*$				# Hangs for some reason
+^samba4.net.api.become.dc.*$			# Fails
+nss.test						# Fails
+samba4.samba3sam.python		# Conversion from EJS not yet finished
+raw.offline 			# Samba 4 doesn't have much offline support yet
+winreg*  #Does not authenticate against the target server
diff --git a/source4/selftest/slow b/source4/selftest/slow
new file mode 100644
index 00000000000..d414368de89
--- /dev/null
+++ b/source4/selftest/slow
@@ -0,0 +1,7 @@
+# This file contains regexes matching tests that are very slow and 
+# should be skipped during a normal test run.
+.*base.bench.holdcon.*			# Slow
+raw.bench.lookup				# Slow
+base.utable						# Slow
+base.smb						# Slow
+rpc.scanner						# Slow
diff --git a/source4/selftest/target/Kvm.pm b/source4/selftest/target/Kvm.pm
deleted file mode 100644
index 3b17a2909c6..00000000000
--- a/source4/selftest/target/Kvm.pm
+++ /dev/null
@@ -1,167 +0,0 @@
-#!/usr/bin/perl
-# Start a KVM machine and run a number of tests against it.
-# Copyright (C) 2005-2008 Jelmer Vernooij <jelmer@samba.org>
-# Published under the GNU GPL, v3 or later.
-
-package Kvm;
-
-use strict;
-use Cwd qw(abs_path);
-use FindBin qw($RealBin);
-use POSIX;
-
-sub new($$$$) {
-	my ($classname, $dc_image, $vdesocket) = @_;
-	my $self = { 
-		dc_image => $dc_image,
-		vdesocket => $vdesocket,
-	};
-	bless $self;
-	return $self;
-}
-
-sub write_kvm_ifup($$$)
-{
-	my ($self, $path, $ip_prefix) = @_;
-	open(SCRIPT, ">$path/kvm-ifup");
-
-	print SCRIPT <<__EOF__;
-#!/bin/sh
-
-PREFIX=$ip_prefix
-
-/sbin/ifconfig \$1 \$PREFIX.1 up
-
-cat <<EOF>$path/udhcpd.conf
-interface \$1
-start 		\$PREFIX.20
-end		\$PREFIX.20
-max_leases 1
-lease_file	$path/udhcpd.leases
-pidfile	$path/udhcpd.pid
-EOF
-
-touch $path/udhcpd.leases
-
-/usr/sbin/udhcpd $path/udhcpd.conf
-
-exit 0
-__EOF__
-	close(SCRIPT);
-	chmod(0755, "$path/kvm-ifup");
-
-	return ("$path/kvm-ifup", "$path/udhcpd.pid", "$ip_prefix.20");
-}
-
-sub teardown_env($$)
-{
-	my ($self, $envvars) = @_;
-
-	print "Killing kvm instance $envvars->{KVM_PID}\n";
-
-	kill 9, $envvars->{KVM_PID};
-
-	if (defined($envvars->{DHCPD_PID})) {
-		print "Killing dhcpd instance $envvars->{DHCPD_PID}\n";
-		kill 9, $envvars->{DHCPD_PID};
-	}
-
-	return 0;
-}
-
-sub getlog_env($$)
-{
-	my ($self, $envvars) = @_;
-
-	return "";
-}
-
-sub check_env($$)
-{
-	my ($self, $envvars) = @_;
-
-	# FIXME: Check whether $self->{pid} is still running
-
-	return 1;
-}
-
-sub read_pidfile($)
-{
-	my ($path) = @_;
-
-	open(PID, $path);
-	<PID> =~ /([0-9]+)/;
-	my ($pid) = $1;
-	close(PID);
-	return $pid;
-}
-
-sub start($$$)
-{
-	my ($self, $path, $image) = @_;
-
-	my $pidfile = "$path/kvm.pid";
-
-	my $opts = (defined($ENV{KVM_OPTIONS})?$ENV{KVM_OPTIONS}:"-nographic");
-
-	if (defined($ENV{KVM_SNAPSHOT})) {
-		$opts .= " -loadvm $ENV{KVM_SNAPSHOT}";
-	}
-
-	my $netopts;
-	my $dhcp_pid;
-	my $ip_address;
-
-	if ($self->{vdesocket}) {
-		$netopts = "vde,socket=$self->{vdesocket}";
-	} else {
-		my $ifup_script, $dhcpd_pidfile;
-		($ifup_script, $dhcpd_pidfile, $ip_address) = $self->write_kvm_ifup($path, "192.168.9");
-		$netopts = "tap,script=$ifup_script";
-		$dhcp_pid = read_pidfile($dhcpd_pidfile);
-	}
-
-	system("kvm -name \"Samba 4 Test Subject\" $opts -monitor unix:$path/kvm.monitor,server,nowait -daemonize -pidfile $pidfile -snapshot $image -net nic -net $netopts");
-
-	return (read_pidfile($pidfile), $dhcp_pid, $ip_address);
-}
-
-sub setup_env($$$)
-{
-	my ($self, $envname, $path) = @_;
-
-	if ($envname eq "dc") {
-		($self->{dc_pid}, $self->{dc_dhcpd_pid}, $self->{dc_ip}) = $self->start($path, $self->{dc_image});
-
-		sub choose_var($$) { 
-			my ($name, $default) = @_; 
-			return defined($ENV{"KVM_DC_$name"})?$ENV{"KVM_DC_$name"}:$default; 
-		}
-
-		if ($envname eq "dc") {
-			return {
-				KVM_PID => $self->{dc_pid},
-				DHCPD_PID => $self->{dc_dhcpd_pid},
-				USERNAME => choose_var("USERNAME", "Administrator"),
-				PASSWORD => choose_var("PASSWORD", "penguin"),
-				DOMAIN => choose_var("DOMAIN", "SAMBA"), 
-				REALM => choose_var("REALM", "SAMBA"), 
-				SERVER => choose_var("SERVER", "DC"), 
-				SERVER_IP => $self->{dc_ip},
-				NETBIOSNAME => choose_var("NETBIOSNAME", "DC"), 
-				NETBIOSALIAS => choose_var("NETBIOSALIAS", "DC"), 
-			};
-		} else {
-			return undef;
-		}
-	} else {
-		return undef;
-	}
-}
-
-sub stop($)
-{
-	my ($self) = @_;
-}
-
-1;
diff --git a/source4/selftest/target/Samba3.pm b/source4/selftest/target/Samba3.pm
deleted file mode 100644
index b0c4eb22bd0..00000000000
--- a/source4/selftest/target/Samba3.pm
+++ /dev/null
@@ -1,434 +0,0 @@
-#!/usr/bin/perl
-# Bootstrap Samba and run a number of tests against it.
-# Copyright (C) 2005-2007 Jelmer Vernooij <jelmer@samba.org>
-# Published under the GNU GPL, v3 or later.
-
-package Samba3;
-
-use strict;
-use Cwd qw(abs_path);
-use FindBin qw($RealBin);
-use POSIX;
-
-sub binpath($$)
-{
-	my ($self, $binary) = @_;
-
-	if (defined($self->{bindir})) {
-		my $path = "$self->{bindir}/$binary";
-		-f $path or die("File $path doesn't exist");
-		return $path;
-	}
-
-	return $binary;
-}
-
-sub new($$) {
-	my ($classname, $bindir) = @_;
-	my $self = { bindir => $bindir };
-	bless $self;
-	return $self;
-}
-
-sub teardown_env($$)
-{
-	my ($self, $envvars) = @_;
-
-	my $smbdpid = read_pid($envvars, "smbd");
-	my $nmbdpid = read_pid($envvars, "nmbd");
-#	my $winbinddpid = read_pid($envvars, "winbindd");
-
-	$self->stop_sig_term($smbdpid);
-	$self->stop_sig_term($nmbdpid);
-#	$self->stop_sig_term($winbinddpid);
-	$self->stop_sig_kill($smbdpid);
-	$self->stop_sig_kill($nmbdpid);
-#	$self->stop_sig_kill($winbinddpid);
-
-	return 0;
-}
-
-sub getlog_env_app($$$)
-{
-	my ($self, $envvars, $name) = @_;
-
-	my $title = "$name LOG of: $envvars->{NETBIOSNAME}\n";
-	my $out = $title;
-
-	open(LOG, "<".$envvars->{$name."_TEST_LOG"});
-
-	seek(LOG, $envvars->{$name."_TEST_LOG_POS"}, SEEK_SET);
-	while (<LOG>) {
-		$out .= $_;
-	}
-	$envvars->{$name."_TEST_LOG_POS"} = tell(LOG);
-	close(LOG);
-
-	return "" if $out eq $title;
- 
-	return $out;
-}
-
-sub getlog_env($$)
-{
-	my ($self, $envvars) = @_;
-	my $ret = "";
-
-	$ret .= $self->getlog_env_app($envvars, "SMBD");
-	$ret .= $self->getlog_env_app($envvars, "NMBD");
-#	$ret .= $self->getlog_env_app($envvars, "WINBINDD");
-
-	return $ret;
-}
-
-sub check_env($$)
-{
-	my ($self, $envvars) = @_;
-
-	# TODO ...
-	return 1;
-}
-
-sub setup_env($$$)
-{
-	my ($self, $envname, $path) = @_;
-	
-	if ($envname eq "dc") {
-		return $self->setup_dc("$path/dc");
-	} else {
-		return undef;
-	}
-}
-
-sub setup_dc($$)
-{
-	my ($self, $path) = @_;
-
-	my $vars = $self->provision($path, "dc");
-
-	$self->check_or_start($vars,
-			      ($ENV{NMBD_MAXTIME} or 2700),
-			      ($ENV{WINBINDD_MAXTIME} or 2700),
-			      ($ENV{SMBD_MAXTIME} or 2700));
-
-	$self->wait_for_start($vars);
-
-	return $vars;
-}
-
-sub stop($)
-{
-	my ($self) = @_;
-}
-
-sub stop_sig_term($$) {
-	my ($self, $pid) = @_;
-	kill("USR1", $pid) or kill("ALRM", $pid) or warn("Unable to kill $pid: $!");
-}
-
-sub stop_sig_kill($$) {
-	my ($self, $pid) = @_;
-	kill("ALRM", $pid) or warn("Unable to kill $pid: $!");
-}
-
-sub write_pid($$$)
-{
-	my ($env_vars, $app, $pid) = @_;
-
-	open(PID, ">$env_vars->{PIDDIR}/timelimit.$app.pid");
-	print PID $pid;
-	close(PID);
-}
-
-sub read_pid($$)
-{
-	my ($env_vars, $app) = @_;
-
-	open(PID, "<$env_vars->{PIDDIR}/timelimit.$app.pid");
-	my $pid = <PID>;
-	close(PID);
-	return $pid;
-}
-
-sub check_or_start($$$$) {
-	my ($self, $env_vars, $nmbd_maxtime, $winbindd_maxtime, $smbd_maxtime) = @_;
-
-	unlink($env_vars->{NMBD_TEST_LOG});
-	print "STARTING NMBD...";
-	my $pid = fork();
-	if ($pid == 0) {
-		open STDOUT, ">$env_vars->{NMBD_TEST_LOG}";
-		open STDERR, '>&STDOUT';
-
-		$ENV{WINBINDD_SOCKET_DIR} = $env_vars->{WINBINDD_SOCKET_DIR};
-
-		my @optargs = ("-d0");
-		if (defined($ENV{NMBD_OPTIONS})) {
-			@optargs = split(/ /, $ENV{NMBD_OPTIONS});
-		}
-
-		$ENV{MAKE_TEST_BINARY} = $self->binpath("nmbd");
-
-		my @preargs = ($self->binpath("timelimit"), $nmbd_maxtime);
-		if(defined($ENV{NMBD_VALGRIND})) { 
-			@preargs = split(/ /, $ENV{NMBD_VALGRIND});
-		}
-
-		exec(@preargs, $self->binpath("nmbd"), "-F", "-S", "--no-process-group", "-s", $env_vars->{SERVERCONFFILE}, @optargs) or die("Unable to start nmbd: $!");
-	}
-	write_pid($env_vars, "nmbd", $pid);
-	print "DONE\n";
-
-# disable winbindd until the build-farm faked_users work with it
-#	unlink($env_vars->{WINBINDD_TEST_LOG});
-#	print "STARTING WINBINDD...";
-#	$pid = fork();
-#	if ($pid == 0) {
-#		open STDOUT, ">$env_vars->{WINBINDD_TEST_LOG}";
-#		open STDERR, '>&STDOUT';
-#
-#		$ENV{WINBINDD_SOCKET_DIR} = $env_vars->{WINBINDD_SOCKET_DIR};
-#
-#		my @optargs = ("-d0");
-#		if (defined($ENV{WINBINDD_OPTIONS})) {
-#			@optargs = split(/ /, $ENV{WINBINDD_OPTIONS});
-#		}
-#
-#		$ENV{MAKE_TEST_BINARY} = $self->binpath("winbindd");
-#		exec($self->binpath("timelimit"), $winbindd_maxtime, $ENV{WINBINDD_VALGRIND}, $self->binpath("winbindd"), "-F", "-S", "--no-process-group", "-s", $env_vars->{SERVERCONFFILE}, @optargs) or die("Unable to start winbindd: $!");
-#	}
-#	write_pid($env_vars, "winbindd", $pid);
-#	print "DONE\n";
-
-	unlink($env_vars->{SMBD_TEST_LOG});
-	print "STARTING SMBD...";
-	$pid = fork();
-	if ($pid == 0) {
-		open STDOUT, ">$env_vars->{SMBD_TEST_LOG}";
-		open STDERR, '>&STDOUT';
-
-		$ENV{WINBINDD_SOCKET_DIR} = $env_vars->{WINBINDD_SOCKET_DIR};
-
-		$ENV{MAKE_TEST_BINARY} = $self->binpath("smbd");
-		my @optargs = ("-d0");
-		if (defined($ENV{SMBD_OPTIONS})) {
-			@optargs = split(/ /, $ENV{SMBD_OPTIONS});
-		}
-		my @preargs = ($self->binpath("timelimit"), $smbd_maxtime);
-		if(defined($ENV{SMBD_VALGRIND})) {
-			@preargs = split(/ /,$ENV{SMBD_VALGRIND});
-		}
-		exec(@preargs, $self->binpath("smbd"), "-F", "-S", "--no-process-group", "-s", $env_vars->{SERVERCONFFILE}, @optargs) or die("Unable to start smbd: $!");
-	}
-	write_pid($env_vars, "smbd", $pid);
-	print "DONE\n";
-
-	return 0;
-}
-
-sub create_clientconf($$$)
-{
-	my ($self, $prefix, $domain) = @_;
-
-	my $lockdir = "$prefix/locks";
-	my $logdir = "$prefix/logs";
-	my $piddir = "$prefix/pid";
-	my $privatedir = "$prefix/private";
-	my $scriptdir = "$RealBin/..";
-	my $conffile = "$prefix/smb.conf";
-
-	my $torture_interfaces='127.0.0.6/8,127.0.0.7/8,127.0.0.8/8,127.0.0.9/8,127.0.0.10/8,127.0.0.11/8';
-	open(CONF, ">$conffile");
-	print CONF "
-[global]
-	workgroup = $domain
-
-	private dir = $privatedir
-	pid directory = $piddir
-	lock directory = $lockdir
-	log file = $logdir/log.\%m
-	log level = 0
-
-	name resolve order = bcast
-
-	netbios name = TORTURE_6
-	interfaces = $torture_interfaces
-	panic action = $scriptdir/gdb_backtrace \%d %\$(MAKE_TEST_BINARY)
-
-	passdb backend = tdbsam
-	";
-	close(CONF);
-}
-
-sub provision($$$)
-{
-	my ($self, $prefix, $role) = @_;
-
-	##
-	## setup the various environment variables we need
-	##
-
-	my %ret = ();
-	my $server = "LOCALHOST2";
-	my $server_ip = "127.0.0.2";
-	my $domain = "SAMBA-TEST";
-
-	my $username = `PATH=/usr/ucb:$ENV{PATH} whoami`;
-	chomp $username;
-	my $password = "test";
-
-	my $srcdir="$RealBin/..";
-	my $scriptdir="$srcdir/selftest";
-	my $prefix_abs = abs_path($prefix);
-
-	my @dirs = ();
-
-	my $shrdir="$prefix_abs/share";
-	push(@dirs,$shrdir);
-
-	my $libdir="$prefix_abs/lib";
-	push(@dirs,$libdir);
-
-	my $piddir="$prefix_abs/pid";
-	push(@dirs,$piddir);
-
-	my $privatedir="$prefix_abs/private";
-	push(@dirs,$privatedir);
-
-	my $lockdir="$prefix_abs/lockdir";
-	push(@dirs,$lockdir);
-
-	my $logdir="$prefix_abs/logs";
-	push(@dirs,$logdir);
-
-	# this gets autocreated by winbindd
-	my $wbsockdir="$prefix_abs/winbindd";
-	my $wbsockprivdir="$lockdir/winbindd_privileged";
-
-	## 
-	## create the test directory layout
-	##
-	mkdir($prefix_abs, 0777);
-	print "CREATE TEST ENVIRONMENT IN '$prefix'...";
-	system("rm -rf $prefix_abs/*");
-	mkdir($_, 0777) foreach(@dirs);
-
-	my $conffile="$libdir/server.conf";
-
-	open(CONF, ">$conffile") or die("Unable to open $conffile");
-	print CONF "
-[global]
-	workgroup = $domain
-
-	private dir = $privatedir
-	pid directory = $piddir
-	lock directory = $lockdir
-	log file = $logdir/log.\%m
-	log level = 0
-
-	name resolve order = bcast
-
-	netbios name = $server
-	interfaces = $server_ip/8
-	bind interfaces only = yes
-	panic action = $scriptdir/gdb_backtrace %d %\$(MAKE_TEST_BINARY)
-
-	passdb backend = tdbsam
-
-	; Necessary to add the build farm hacks
-	add user script = /bin/false
-	add machine script = /bin/false
-
-	kernel oplocks = no
-	kernel change notify = no
-
-	syslog = no
-	printing = bsd
-	printcap name = /dev/null
-
-";
-
-	if ($role eq "dc") {
-		print CONF "\tdomain logons = yes\n";
-		print CONF "\tdomain master = yes\n";
-	}
-
-print CONF "
-
-	winbindd:socket dir = $wbsockdir
-
-[tmp]
-	path = $shrdir
-	read only = no
-	smbd:sharedelay = 100000
-	map hidden = yes
-	map system = yes
-	create mask = 755
-[hideunread]
-	copy = tmp
-	hide unreadable = yes
-[hideunwrite]
-	copy = tmp
-	hide unwriteable files = yes
-[print1]
-	copy = tmp
-	printable = yes
-	printing = test
-[print2]
-	copy = print1
-[print3]
-	copy = print1
-[print4]
-	copy = print1
-	";
-	close(CONF);
-
-	##
-	## create a test account
-	##
-
-	open(PWD, "|".$self->binpath("smbpasswd")." -c $conffile -L -s -a $username");
-	print PWD "$password\n$password\n";
-	close(PWD) or die("Unable to set password for test account");
-
-	print "DONE\n";
-
-	$ret{SERVER_IP} = $server_ip;
-	$ret{NMBD_TEST_LOG} = "$prefix/nmbd_test.log";
-	$ret{WINBINDD_TEST_LOG} = "$prefix/winbindd_test.log";
-	$ret{SMBD_TEST_LOG} = "$prefix/smbd_test.log";
-	$ret{SERVERCONFFILE} = $conffile;
-	$ret{CONFIGURATION} ="-s $conffile";
-	$ret{SERVER} = $server;
-	$ret{USERNAME} = $username;
-	$ret{DOMAIN} = $domain;
-	$ret{NETBIOSNAME} = $server;
-	$ret{PASSWORD} = $password;
-	$ret{PIDDIR} = $piddir;
-	$ret{WINBINDD_SOCKET_DIR} = $wbsockdir;
-	$ret{WINBINDD_PRIV_PIPE_DIR} = $wbsockprivdir;
-	return \%ret;
-}
-
-sub wait_for_start($$)
-{
-	my ($self, $envvars) = @_;
-
-	# give time for nbt server to register its names
-	print "delaying for nbt name registration\n";
-	sleep(10);
-	# This will return quickly when things are up, but be slow if we need to wait for (eg) SSL init 
-	system($self->binpath("nmblookup") ." $envvars->{CONFIGURATION} -U $envvars->{SERVER_IP} __SAMBA__");
-	system($self->binpath("nmblookup") ." $envvars->{CONFIGURATION} __SAMBA__");
-	system($self->binpath("nmblookup") ." $envvars->{CONFIGURATION} -U 127.255.255.255 __SAMBA__");
-	system($self->binpath("nmblookup") ." $envvars->{CONFIGURATION} -U $envvars->{SERVER_IP} $envvars->{SERVER}");
-	system($self->binpath("nmblookup") ." $envvars->{CONFIGURATION} $envvars->{SERVER}");
-	# make sure smbd is also up set
-	print "wait for smbd\n";
-	system($self->binpath("smbclient") ." $envvars->{CONFIGURATION} -L $envvars->{SERVER_IP} -U% -p 139 | head -2");
-	system($self->binpath("smbclient") ." $envvars->{CONFIGURATION} -L $envvars->{SERVER_IP} -U% -p 139 | head -2");
-
-	print $self->getlog_env($envvars);
-}
-
-1;
diff --git a/source4/selftest/target/Samba4.pm b/source4/selftest/target/Samba4.pm
deleted file mode 100644
index 8835f69c6c5..00000000000
--- a/source4/selftest/target/Samba4.pm
+++ /dev/null
@@ -1,957 +0,0 @@
-#!/usr/bin/perl
-# Bootstrap Samba and run a number of tests against it.
-# Copyright (C) 2005-2007 Jelmer Vernooij <jelmer@samba.org>
-# Published under the GNU GPL, v3 or later.
-
-package Samba4;
-
-use strict;
-use Cwd qw(abs_path);
-use FindBin qw($RealBin);
-use POSIX;
-
-sub new($$$$) {
-	my ($classname, $bindir, $ldap, $setupdir) = @_;
-	my $self = { 
-		vars => {}, 
-		ldap => $ldap, 
-		bindir => $bindir, 
-		setupdir => $setupdir 
-	};
-	bless $self;
-	return $self;
-}
-
-sub openldap_start($$$) {
-        my ($slapd_conf, $uri, $logs) = @_;
-  	my $oldpath = $ENV{PATH};
-	my $olroot = "";
-	my $olpath = "";
-	if (defined $ENV{OPENLDAP_ROOT}) {
-	    $olroot = "$ENV{OPENLDAP_ROOT}";
-	    $olpath = "$olroot/libexec:$olroot/sbin:";
-	}
-	$ENV{PATH} = "$olpath/usr/local/sbin:/usr/sbin:/sbin:$ENV{PATH}";
-        system("slapd -d63 -f $slapd_conf -h $uri > $logs 2>&1 &");
-        $ENV{PATH} = $oldpath;
-}
-
-sub slapd_start($$)
-{
-	my $count = 0;
-	my ($self, $env_vars) = @_;
-
-	my $uri = $env_vars->{LDAP_URI};
-
-	# running slapd in the background means it stays in the same process group, so it can be
-	# killed by timelimit
-	if ($self->{ldap} eq "fedora-ds") {
-	        system("$ENV{FEDORA_DS_ROOT}/sbin/ns-slapd -D $env_vars->{FEDORA_DS_DIR} -d0 -i $env_vars->{FEDORA_DS_PIDFILE}> $env_vars->{LDAPDIR}/logs 2>&1 &");
-	} elsif ($self->{ldap} eq "openldap") {
-	        openldap_start($env_vars->{SLAPD_CONF}, $uri, "$env_vars->{LDAPDIR}/logs");
-	}
-	while (system("$self->{bindir}/ldbsearch -H $uri -s base -b \"\" supportedLDAPVersion > /dev/null") != 0) {
-	        $count++;
-		if ($count > 40) {
-		    $self->slapd_stop($env_vars);
-		    return 0;
-		}
-		sleep(1);
-	}
-	return 1;
-}
-
-sub slapd_stop($$)
-{
-	my ($self, $envvars) = @_;
-	if ($self->{ldap} eq "fedora-ds") {
-		system("$envvars->{LDAPDIR}/slapd-samba4/stop-slapd");
-	} elsif ($self->{ldap} eq "openldap") {
-		open(IN, "<$envvars->{OPENLDAP_PIDFILE}") or 
-			die("unable to open slapd pid file: $envvars->{OPENLDAP_PIDFILE}");
-		kill 9, <IN>;
-		close(IN);
-	}
-	return 1;
-}
-
-sub check_or_start($$$) 
-{
-	my ($self, $env_vars, $max_time) = @_;
-	return 0 if ( -p $env_vars->{SMBD_TEST_FIFO});
-
-	unlink($env_vars->{SMBD_TEST_FIFO});
-	POSIX::mkfifo($env_vars->{SMBD_TEST_FIFO}, 0700);
-	unlink($env_vars->{SMBD_TEST_LOG});
-	
-	print "STARTING SMBD... ";
-	my $pid = fork();
-	if ($pid == 0) {
-		open STDIN, $env_vars->{SMBD_TEST_FIFO};
-		open STDOUT, ">$env_vars->{SMBD_TEST_LOG}";
-		open STDERR, '>&STDOUT';
-		
-		SocketWrapper::set_default_iface($env_vars->{SOCKET_WRAPPER_DEFAULT_IFACE});
-
-		my $valgrind = "";
-		if (defined($ENV{SMBD_VALGRIND})) {
-		    $valgrind = $ENV{SMBD_VALGRIND};
-		} 
-
-		$ENV{KRB5_CONFIG} = $env_vars->{KRB5_CONFIG}; 
-
-		$ENV{NSS_WRAPPER_PASSWD} = $env_vars->{NSS_WRAPPER_PASSWD};
-		$ENV{NSS_WRAPPER_GROUP} = $env_vars->{NSS_WRAPPER_GROUP};
-
-		# Start slapd before smbd, but with the fifo on stdin
-		if (defined($self->{ldap})) {
-		    $self->slapd_start($env_vars) or 
-			die("couldn't start slapd (2nd time)");
-		}
-
-		my $optarg = "";
-		if (defined($max_time)) {
-			$optarg = "--maximum-runtime=$max_time ";
-		}
-		if (defined($ENV{SMBD_OPTIONS})) {
-			$optarg.= " $ENV{SMBD_OPTIONS}";
-		}
-		my $ret = system("$valgrind $self->{bindir}/smbd $optarg $env_vars->{CONFIGURATION} -M single -i --leak-report-full");
-		if ($? == -1) {
-			print "Unable to start smbd: $ret: $!\n";
-			exit 1;
-		}
-		unlink($env_vars->{SMBD_TEST_FIFO});
-		my $exit = $? >> 8;
-		if ( $ret == 0 ) {
-			print "smbd exits with status $exit\n";
-		} elsif ( $ret & 127 ) {
-			print "smbd got signal ".($ret & 127)." and exits with $exit!\n";
-		} else {
-			$ret = $? >> 8;
-			print "smbd failed with status $exit!\n";
-		}
-		exit $exit;
-	}
-	print "DONE\n";
-
-	open(DATA, ">$env_vars->{SMBD_TEST_FIFO}");
-
-	return $pid;
-}
-
-sub wait_for_start($$)
-{
-	my ($self, $testenv_vars) = @_;
-	# give time for nbt server to register its names
-	print "delaying for nbt name registration\n";
-	sleep 2;
-
-	# This will return quickly when things are up, but be slow if we 
-	# need to wait for (eg) SSL init 
-	system("bin/nmblookup $testenv_vars->{CONFIGURATION} $testenv_vars->{SERVER}");
-	system("bin/nmblookup $testenv_vars->{CONFIGURATION} -U $testenv_vars->{SERVER_IP} $testenv_vars->{SERVER}");
-	system("bin/nmblookup $testenv_vars->{CONFIGURATION} $testenv_vars->{NETBIOSNAME}");
-	system("bin/nmblookup $testenv_vars->{CONFIGURATION} -U $testenv_vars->{SERVER_IP} $testenv_vars->{NETBIOSNAME}");
-	system("bin/nmblookup $testenv_vars->{CONFIGURATION} $testenv_vars->{NETBIOSALIAS}");
-	system("bin/nmblookup $testenv_vars->{CONFIGURATION} -U $testenv_vars->{SERVER_IP} $testenv_vars->{NETBIOSALIAS}");
-	system("bin/nmblookup $testenv_vars->{CONFIGURATION} $testenv_vars->{SERVER}");
-	system("bin/nmblookup $testenv_vars->{CONFIGURATION} -U $testenv_vars->{SERVER_IP} $testenv_vars->{SERVER}");
-	system("bin/nmblookup $testenv_vars->{CONFIGURATION} $testenv_vars->{NETBIOSNAME}");
-	system("bin/nmblookup $testenv_vars->{CONFIGURATION} -U $testenv_vars->{SERVER_IP} $testenv_vars->{NETBIOSNAME}");
-	system("bin/nmblookup $testenv_vars->{CONFIGURATION} $testenv_vars->{NETBIOSALIAS}");
-	system("bin/nmblookup $testenv_vars->{CONFIGURATION} -U $testenv_vars->{SERVER_IP} $testenv_vars->{NETBIOSALIAS}");
-
-	print $self->getlog_env($testenv_vars);
-}
-
-sub write_ldb_file($$$)
-{
-	my ($self, $file, $ldif) = @_;
-
-	open(LDIF, "|$self->{bindir}/ldbadd -H $file >/dev/null");
-	print LDIF $ldif;
-	return close(LDIF);
-}
-
-sub add_wins_config($$)
-{
-	my ($self, $privatedir) = @_;
-
-	return $self->write_ldb_file("$privatedir/wins_config.ldb", "
-dn: name=TORTURE_6,CN=PARTNERS
-objectClass: wreplPartner
-name: TORTURE_6
-address: 127.0.0.6
-pullInterval: 0
-pushChangeCount: 0
-type: 0x3
-");
-}
-
-sub mk_fedora_ds($$$)
-{
-	my ($self, $ldapdir, $configuration) = @_;
-
-	my $fedora_ds_inf = "$ldapdir/fedorads.inf";
-	my $fedora_ds_extra_ldif = "$ldapdir/fedorads-partitions.ldif";
-
-	#Make the subdirectory be as fedora DS would expect
-	my $fedora_ds_dir = "$ldapdir/slapd-samba4";
-
-	my $pidfile = "$fedora_ds_dir/logs/slapd-samba4.pid";
-
-my $dir = getcwd();
-chdir "$ENV{FEDORA_DS_ROOT}/bin" || die;
-	if (system("perl $ENV{FEDORA_DS_ROOT}/sbin/setup-ds.pl --silent --file=$fedora_ds_inf >&2") != 0) {
-            chdir $dir;
-            die("perl $ENV{FEDORA_DS_ROOT}/sbin/setup-ds.pl --silent --file=$fedora_ds_inf FAILED: $?");
-        }
-        chdir $dir || die;
-
-	return ($fedora_ds_dir, $pidfile);
-}
-
-sub mk_openldap($$$)
-{
-	my ($self, $ldapdir, $configuration) = @_;
-
-	my $slapd_conf = "$ldapdir/slapd.conf";
-	my $pidfile = "$ldapdir/slapd.pid";
-	my $modconf = "$ldapdir/modules.conf";
-
-	my $oldpath = $ENV{PATH};
-	my $olpath = "";
-	my $olroot = "";
-	if (defined $ENV{OPENLDAP_ROOT}) {
-               $olroot = "$ENV{OPENLDAP_ROOT}";
-	       $olpath = "$olroot/libexec:$olroot/sbin:";
-	}
-	$ENV{PATH} = "$olpath/usr/local/sbin:/usr/sbin:/sbin:$ENV{PATH}";
-
-	unlink($modconf);
-	open(CONF, ">$modconf"); close(CONF);
-
-	if (system("slaptest -u -f $slapd_conf >&2") != 0) {
-		open(CONF, ">$modconf"); 
-		# enable slapd modules
-		print CONF "
-modulepath      $olroot/libexec/openldap
-moduleload	syncprov
-moduleload      memberof
-moduleload      refint
-";
-		close(CONF);
-	}
-	if (system("slaptest -u -f $slapd_conf >&2") != 0) {
-		open(CONF, ">$modconf"); 
-		# enable slapd modules
-		print CONF "
-modulepath      $olroot/libexec/openldap
-moduleload	back_hdb
-moduleload	syncprov
-moduleload      memberof
-moduleload      refint
-";
-		close(CONF);
-	}
-
-	if (system("slaptest -u -f $slapd_conf >&2") != 0) {
-		open(CONF, ">$modconf"); 
-		# enable slapd modules
-		print CONF "
-moduleload	back_hdb
-moduleload	syncprov
-moduleload      memberof
-moduleload      refint
-";
-		close(CONF);
-	}
-
-	if (system("slaptest -u -f $slapd_conf >&2") != 0) {
-		open(CONF, ">$modconf"); 
-		# enable slapd modules
-		print CONF "
-modulepath	/usr/lib/ldap
-moduleload	back_hdb
-moduleload	syncprov
-moduleload      memberof
-moduleload      refint
-";
-		close(CONF);
-	}
-
-	if (system("slaptest -u -f $slapd_conf >&2") != 0) {
-		open(CONF, ">$modconf"); 
-		# enable slapd modules (Fedora layout)
-		print CONF "
-modulepath	/usr/lib/openldap
-moduleload	syncprov
-moduleload      memberof
-moduleload      refint
-";
-		close(CONF);
-	}
-
-	if (system("slaptest -u -f $slapd_conf >&2") != 0) {
-		open(CONF, ">$modconf"); 
-		# enable slapd modules (Fedora x86_64 layout)
-		print CONF "
-modulepath	/usr/lib64/openldap
-moduleload	syncprov
-moduleload      memberof
-moduleload      refint
-";
-		close(CONF);
-	}
-
-	system("slaptest -u -f $slapd_conf") == 0 or die("slaptest still fails after adding modules");
-
-    
-	$ENV{PATH} = $oldpath;
-
-	return ($slapd_conf, $pidfile);
-}
-
-sub mk_keyblobs($$)
-{
-	my ($self, $tlsdir) = @_;
-
-	#TLS and PKINIT crypto blobs
-	my $dhfile = "$tlsdir/dhparms.pem";
-	my $cafile = "$tlsdir/ca.pem";
-	my $certfile = "$tlsdir/cert.pem";
-	my $reqkdc = "$tlsdir/req-kdc.der";
-	my $kdccertfile = "$tlsdir/kdc.pem";
-	my $keyfile = "$tlsdir/key.pem";
-	my $adminkeyfile = "$tlsdir/adminkey.pem";
-	my $reqadmin = "$tlsdir/req-admin.der";
-	my $admincertfile = "$tlsdir/admincert.pem";
-
-	mkdir($tlsdir, 0777);
-
-	#This is specified here to avoid draining entropy on every run
-	open(DHFILE, ">$dhfile");
-	print DHFILE <<EOF;
------BEGIN DH PARAMETERS-----
-MGYCYQC/eWD2xkb7uELmqLi+ygPMKyVcpHUo2yCluwnbPutEueuxrG/Cys8j8wLO
-svCN/jYNyR2NszOmg7ZWcOC/4z/4pWDVPUZr8qrkhj5MRKJc52MncfaDglvEdJrv
-YX70obsCAQI=
------END DH PARAMETERS-----
-EOF
-	close(DHFILE);
-
-	#Likewise, we pregenerate the key material.  This allows the 
-	#other certificates to be pre-generated
-	open(KEYFILE, ">$keyfile");
-	print KEYFILE <<EOF;
------BEGIN RSA PRIVATE KEY-----
-MIICXQIBAAKBgQDKg6pAwCHUMA1DfHDmWhZfd+F0C+9Jxcqvpw9ii9En3E1uflpc
-ol3+S9/6I/uaTmJHZre+DF3dTzb/UOZo0Zem8N+IzzkgoGkFafjXuT3BL5UPY2/H
-6H+pPqVIRLOmrWImai359YyoKhFyo37Y6HPeU8QcZ+u2rS9geapIWfeuowIDAQAB
-AoGAAqDLzFRR/BF1kpsiUfL4WFvTarCe9duhwj7ORc6fs785qAXuwUYAJ0Uvzmy6
-HqoGv3t3RfmeHDmjcpPHsbOKnsOQn2MgmthidQlPBMWtQMff5zdoYNUFiPS0XQBq
-szNW4PRjaA9KkLQVTwnzdXGkBSkn/nGxkaVu7OR3vJOBoo0CQQDO4upypesnbe6p
-9/xqfZ2uim8IwV1fLlFClV7WlCaER8tsQF4lEi0XSzRdXGUD/dilpY88Nb+xok/X
-8Z8OvgAXAkEA+pcLsx1gN7kxnARxv54jdzQjC31uesJgMKQXjJ0h75aUZwTNHmZQ
-vPxi6u62YiObrN5oivkixwFNncT9MxTxVQJBAMaWUm2SjlLe10UX4Zdm1MEB6OsC
-kVoX37CGKO7YbtBzCfTzJGt5Mwc1DSLA2cYnGJqIfSFShptALlwedot0HikCQAJu
-jNKEKnbf+TdGY8Q0SKvTebOW2Aeg80YFkaTvsXCdyXrmdQcifw4WdO9KucJiDhSz
-Y9hVapz7ykEJtFtWjLECQQDIlfc63I5ZpXfg4/nN4IJXUW6AmPVOYIA5215itgki
-cSlMYli1H9MEXH0pQMGv5Qyd0OYIx2DDg96mZ+aFvqSG
------END RSA PRIVATE KEY-----
-EOF
-	close(KEYFILE);
-
-	open(ADMINKEYFILE, ">$adminkeyfile");
-
-	print ADMINKEYFILE <<EOF;
------BEGIN RSA PRIVATE KEY-----
-MIICXQIBAAKBgQD0+OL7TQBj0RejbIH1+g5GeRaWaM9xF43uE5y7jUHEsi5owhZF
-5iIoHZeeL6cpDF5y1BZRs0JlA1VqMry1jjKlzFYVEMMFxB6esnXhl0Jpip1JkUMM
-XLOP1m/0dqayuHBWozj9f/cdyCJr0wJIX1Z8Pr+EjYRGPn/MF0xdl3JRlwIDAQAB
-AoGAP8mjCP628Ebc2eACQzOWjgEvwYCPK4qPmYOf1zJkArzG2t5XAGJ5WGrENRuB
-cm3XFh1lpmaADl982UdW3gul4gXUy6w4XjKK4vVfhyHj0kZ/LgaXUK9BAGhroJ2L
-osIOUsaC6jdx9EwSRctwdlF3wWJ8NK0g28AkvIk+FlolW4ECQQD7w5ouCDnf58CN
-u4nARx4xv5XJXekBvOomkCQAmuOsdOb6b9wn3mm2E3au9fueITjb3soMR31AF6O4
-eAY126rXAkEA+RgHzybzZEP8jCuznMqoN2fq/Vrs6+W3M8/G9mzGEMgLLpaf2Jiz
-I9tLZ0+OFk9tkRaoCHPfUOCrVWJZ7Y53QQJBAMhoA6rw0WDyUcyApD5yXg6rusf4
-ASpo/tqDkqUIpoL464Qe1tjFqtBM3gSXuhs9xsz+o0bzATirmJ+WqxrkKTECQHt2
-OLCpKqwAspU7N+w32kaUADoRLisCEdrhWklbwpQgwsIVsCaoEOpt0CLloJRYTANE
-yoZeAErTALjyZYZEPcECQQDlUi0N8DFxQ/lOwWyR3Hailft+mPqoPCa8QHlQZnlG
-+cfgNl57YHMTZFwgUVFRdJNpjH/WdZ5QxDcIVli0q+Ko
------END RSA PRIVATE KEY-----
-EOF
-
-	#generated with 
-	# hxtool issue-certificate --self-signed --issue-ca \
-	# --ca-private-key="FILE:$KEYFILE" \
-	# --subject="CN=CA,DC=samba,DC=example,DC=com" \
-	# --certificate="FILE:$CAFILE" --lifetime="25 years"
-
-	open(CAFILE, ">$cafile");
-	print CAFILE <<EOF;
------BEGIN CERTIFICATE-----
-MIICcTCCAdqgAwIBAgIUaBPmjnPVqyFqR5foICmLmikJTzgwCwYJKoZIhvcNAQEFMFIxEzAR
-BgoJkiaJk/IsZAEZDANjb20xFzAVBgoJkiaJk/IsZAEZDAdleGFtcGxlMRUwEwYKCZImiZPy
-LGQBGQwFc2FtYmExCzAJBgNVBAMMAkNBMCIYDzIwMDgwMzAxMTIyMzEyWhgPMjAzMzAyMjQx
-MjIzMTJaMFIxEzARBgoJkiaJk/IsZAEZDANjb20xFzAVBgoJkiaJk/IsZAEZDAdleGFtcGxl
-MRUwEwYKCZImiZPyLGQBGQwFc2FtYmExCzAJBgNVBAMMAkNBMIGfMA0GCSqGSIb3DQEBAQUA
-A4GNADCBiQKBgQDKg6pAwCHUMA1DfHDmWhZfd+F0C+9Jxcqvpw9ii9En3E1uflpcol3+S9/6
-I/uaTmJHZre+DF3dTzb/UOZo0Zem8N+IzzkgoGkFafjXuT3BL5UPY2/H6H+pPqVIRLOmrWIm
-ai359YyoKhFyo37Y6HPeU8QcZ+u2rS9geapIWfeuowIDAQABo0IwQDAOBgNVHQ8BAf8EBAMC
-AaYwHQYDVR0OBBYEFMLZufegDKLZs0VOyFXYK1L6M8oyMA8GA1UdEwEB/wQFMAMBAf8wDQYJ
-KoZIhvcNAQEFBQADgYEAAZJbCAAkaqgFJ0xgNovn8Ydd0KswQPjicwiODPgw9ZPoD2HiOUVO
-yYDRg/dhFF9y656OpcHk4N7qZ2sl3RlHkzDu+dseETW+CnKvQIoXNyeARRJSsSlwrwcoD4JR
-HTLk2sGigsWwrJ2N99sG/cqSJLJ1MFwLrs6koweBnYU0f/g=
------END CERTIFICATE-----
-EOF
-
-	#generated with GNUTLS internally in Samba.  
-
-	open(CERTFILE, ">$certfile");
-	print CERTFILE <<EOF;
------BEGIN CERTIFICATE-----
-MIICYTCCAcygAwIBAgIE5M7SRDALBgkqhkiG9w0BAQUwZTEdMBsGA1UEChMUU2Ft
-YmEgQWRtaW5pc3RyYXRpb24xNDAyBgNVBAsTK1NhbWJhIC0gdGVtcG9yYXJ5IGF1
-dG9nZW5lcmF0ZWQgY2VydGlmaWNhdGUxDjAMBgNVBAMTBVNhbWJhMB4XDTA2MDgw
-NDA0MzY1MloXDTA4MDcwNDA0MzY1MlowZTEdMBsGA1UEChMUU2FtYmEgQWRtaW5p
-c3RyYXRpb24xNDAyBgNVBAsTK1NhbWJhIC0gdGVtcG9yYXJ5IGF1dG9nZW5lcmF0
-ZWQgY2VydGlmaWNhdGUxDjAMBgNVBAMTBVNhbWJhMIGcMAsGCSqGSIb3DQEBAQOB
-jAAwgYgCgYDKg6pAwCHUMA1DfHDmWhZfd+F0C+9Jxcqvpw9ii9En3E1uflpcol3+
-S9/6I/uaTmJHZre+DF3dTzb/UOZo0Zem8N+IzzkgoGkFafjXuT3BL5UPY2/H6H+p
-PqVIRLOmrWImai359YyoKhFyo37Y6HPeU8QcZ+u2rS9geapIWfeuowIDAQABoyUw
-IzAMBgNVHRMBAf8EAjAAMBMGA1UdJQQMMAoGCCsGAQUFBwMBMAsGCSqGSIb3DQEB
-BQOBgQAmkN6XxvDnoMkGcWLCTwzxGfNNSVcYr7TtL2aJh285Xw9zaxcm/SAZBFyG
-LYOChvh6hPU7joMdDwGfbiLrBnMag+BtGlmPLWwp/Kt1wNmrRhduyTQFhN3PP6fz
-nBr9vVny2FewB2gHmelaPS//tXdxivSXKz3NFqqXLDJjq7P8wA==
------END CERTIFICATE-----
-EOF
-	close(CERTFILE);
-
-	#KDC certificate
-	# hxtool request-create \
-	# --subject="CN=krbtgt,CN=users,DC=samba,DC=example,DC=com" \
-	# --key="FILE:$KEYFILE" $KDCREQ
-
-	# hxtool issue-certificate --ca-certificate=FILE:$CAFILE,$KEYFILE \
-	# --type="pkinit-kdc" \
-	# --pk-init-principal="krbtgt/SAMBA.EXAMPLE.COM@SAMBA.EXAMPLE.COM" \
-	# --req="PKCS10:$KDCREQ" --certificate="FILE:$KDCCERTFILE" \
-	# --lifetime="25 years"
-
-	open(KDCCERTFILE, ">$kdccertfile");
-	print KDCCERTFILE <<EOF;
------BEGIN CERTIFICATE-----
-MIIDDDCCAnWgAwIBAgIUI2Tzj+JnMzMcdeabcNo30rovzFAwCwYJKoZIhvcNAQEFMFIxEzAR
-BgoJkiaJk/IsZAEZDANjb20xFzAVBgoJkiaJk/IsZAEZDAdleGFtcGxlMRUwEwYKCZImiZPy
-LGQBGQwFc2FtYmExCzAJBgNVBAMMAkNBMCIYDzIwMDgwMzAxMTMxOTIzWhgPMjAzMzAyMjQx
-MzE5MjNaMGYxEzARBgoJkiaJk/IsZAEZDANjb20xFzAVBgoJkiaJk/IsZAEZDAdleGFtcGxl
-MRUwEwYKCZImiZPyLGQBGQwFc2FtYmExDjAMBgNVBAMMBXVzZXJzMQ8wDQYDVQQDDAZrcmJ0
-Z3QwgZ8wDQYJKoZIhvcNAQEBBQADgY0AMIGJAoGBAMqDqkDAIdQwDUN8cOZaFl934XQL70nF
-yq+nD2KL0SfcTW5+WlyiXf5L3/oj+5pOYkdmt74MXd1PNv9Q5mjRl6bw34jPOSCgaQVp+Ne5
-PcEvlQ9jb8fof6k+pUhEs6atYiZqLfn1jKgqEXKjftjoc95TxBxn67atL2B5qkhZ966jAgMB
-AAGjgcgwgcUwDgYDVR0PAQH/BAQDAgWgMBIGA1UdJQQLMAkGBysGAQUCAwUwVAYDVR0RBE0w
-S6BJBgYrBgEFAgKgPzA9oBMbEVNBTUJBLkVYQU1QTEUuQ09NoSYwJKADAgEBoR0wGxsGa3Ji
-dGd0GxFTQU1CQS5FWEFNUExFLkNPTTAfBgNVHSMEGDAWgBTC2bn3oAyi2bNFTshV2CtS+jPK
-MjAdBgNVHQ4EFgQUwtm596AMotmzRU7IVdgrUvozyjIwCQYDVR0TBAIwADANBgkqhkiG9w0B
-AQUFAAOBgQBmrVD5MCmZjfHp1nEnHqTIh8r7lSmVtDx4s9MMjxm9oNrzbKXynvdhwQYFVarc
-ge4yRRDXtSebErOl71zVJI9CVeQQpwcH+tA85oGA7oeFtO/S7ls581RUU6tGgyxV4veD+lJv
-KPH5LevUtgD+q9H4LU4Sq5N3iFwBaeryB0g2wg==
------END CERTIFICATE-----
-EOF
-
-	# hxtool request-create \
-	# --subject="CN=Administrator,CN=users,DC=samba,DC=example,DC=com" \
-	# --key="FILE:$ADMINKEYFILE" $ADMINREQFILE
-
-	# hxtool issue-certificate --ca-certificate=FILE:$CAFILE,$KEYFILE \
-	# --type="pkinit-client" \
-	# --pk-init-principal="administrator@SAMBA.EXAMPLE.COM" \
-	# --req="PKCS10:$ADMINREQFILE" --certificate="FILE:$ADMINCERTFILE" \
-	# --lifetime="25 years"
-	
-	open(ADMINCERTFILE, ">$admincertfile");
-	print ADMINCERTFILE <<EOF;
------BEGIN CERTIFICATE-----
-MIIDHTCCAoagAwIBAgIUC0W5dW/N9kE+NgD0mKK34YgyqQ0wCwYJKoZIhvcNAQEFMFIxEzAR
-BgoJkiaJk/IsZAEZDANjb20xFzAVBgoJkiaJk/IsZAEZDAdleGFtcGxlMRUwEwYKCZImiZPy
-LGQBGQwFc2FtYmExCzAJBgNVBAMMAkNBMCIYDzIwMDgwMzAxMTMyMzAwWhgPMjAzMzAyMjQx
-MzIzMDBaMG0xEzARBgoJkiaJk/IsZAEZDANjb20xFzAVBgoJkiaJk/IsZAEZDAdleGFtcGxl
-MRUwEwYKCZImiZPyLGQBGQwFc2FtYmExDjAMBgNVBAMMBXVzZXJzMRYwFAYDVQQDDA1BZG1p
-bmlzdHJhdG9yMIGfMA0GCSqGSIb3DQEBAQUAA4GNADCBiQKBgQD0+OL7TQBj0RejbIH1+g5G
-eRaWaM9xF43uE5y7jUHEsi5owhZF5iIoHZeeL6cpDF5y1BZRs0JlA1VqMry1jjKlzFYVEMMF
-xB6esnXhl0Jpip1JkUMMXLOP1m/0dqayuHBWozj9f/cdyCJr0wJIX1Z8Pr+EjYRGPn/MF0xd
-l3JRlwIDAQABo4HSMIHPMA4GA1UdDwEB/wQEAwIFoDAoBgNVHSUEITAfBgcrBgEFAgMEBggr
-BgEFBQcDAgYKKwYBBAGCNxQCAjBIBgNVHREEQTA/oD0GBisGAQUCAqAzMDGgExsRU0FNQkEu
-RVhBTVBMRS5DT02hGjAYoAMCAQGhETAPGw1hZG1pbmlzdHJhdG9yMB8GA1UdIwQYMBaAFMLZ
-ufegDKLZs0VOyFXYK1L6M8oyMB0GA1UdDgQWBBQg81bLyfCA88C2B/BDjXlGuaFaxjAJBgNV
-HRMEAjAAMA0GCSqGSIb3DQEBBQUAA4GBAHsqSqul0hZCXn4t8Kfp3v/JLMiUMJihR1XOgzoa
-ufLOQ1HNzFUHKuo1JEQ1+i5gHT/arLu/ZBF4BfQol7vW27gKIEt0fkRV8EvoPxXvSokHq0Ku
-HCuPOhYNEP3wYiwB3g93NMCinWVlz0mh5aijEU7y/XrjlZxBKFFrTE+BJi1o
------END CERTIFICATE-----
-EOF
-	close(ADMINCERTFILE);
-}
-
-sub provision($$$$$$)
-{
-	my ($self, $prefix, $server_role, $netbiosname, $netbiosalias, $swiface, $password) = @_;
-
-	my $smbd_loglevel = 1;
-	my $username = "administrator";
-	my $domain = "SAMBADOMAIN";
-	my $realm = "SAMBA.EXAMPLE.COM";
-	my $dnsname = "samba.example.com";
-	my $basedn = "dc=samba,dc=example,dc=com";
-	my $unix_name = ($ENV{USER} or $ENV{LOGNAME} or `whoami`);
-	chomp $unix_name;
-	my $unix_uid = $>;
-	my $unix_gids_str = $);
-	my @unix_gids = split(" ", $unix_gids_str);
-	my $srcdir="$RealBin/..";
-	-d $prefix or mkdir($prefix, 0777) or die("Unable to create $prefix");
-	my $prefix_abs = abs_path($prefix);
-	my $tmpdir = "$prefix_abs/tmp";
-	my $etcdir = "$prefix_abs/etc";
-	my $piddir = "$prefix_abs/pid";
-	my $conffile = "$etcdir/smb.conf";
-	my $krb5_config = "$etcdir/krb5.conf";
-	my $privatedir = "$prefix_abs/private";
-	my $ncalrpcdir = "$prefix_abs/ncalrpc";
-	my $lockdir = "$prefix_abs/lockdir";
-	my $winbindd_socket_dir = "$prefix_abs/winbindd_socket";
-	my $winbindd_privileged_socket_dir = "$prefix_abs/winbindd_privileged_socket";
-	my $ntp_signd_socket_dir = "$prefix_abs/ntp_signd_socket";
-	my $nsswrap_passwd = "$etcdir/passwd";
-	my $nsswrap_group = "$etcdir/group";
-
-	my $configuration = "--configfile=$conffile";
-	my $ldapdir = "$privatedir/ldap";
-
-	my $tlsdir = "$privatedir/tls";
-
-	my $ifaceipv4 = "127.0.0.$swiface";
-	my $interfaces = "$ifaceipv4/8";
-
-	(system("rm -rf $prefix/*") == 0) or die("Unable to clean up");
-	mkdir($_, 0777) foreach ($privatedir, $etcdir, $piddir, $ncalrpcdir, $lockdir, 
-		$tmpdir, "$tmpdir/test1", "$tmpdir/test2");
-
-
-	my $localbasedn = $basedn;
-	$localbasedn = "CN=$netbiosname" if $server_role eq "member server";
-
-	open(CONFFILE, ">$conffile");
-	print CONFFILE "
-[global]
-	netbios name = $netbiosname
-	netbios aliases = $netbiosalias
-	workgroup = $domain
-	realm = $realm
-	private dir = $privatedir
-	pid directory = $piddir
-	ncalrpc dir = $ncalrpcdir
-	lock dir = $lockdir
-	setup directory = $self->{setupdir}
-	modules dir = $self->{bindir}/modules
-	js include = $srcdir/scripting/libjs
-	winbindd socket directory = $winbindd_socket_dir
-	winbindd privileged socket directory = $winbindd_privileged_socket_dir
-	ntp signd socket directory = $ntp_signd_socket_dir
-        winbind separator = /
-	name resolve order = bcast
-	interfaces = $interfaces
-	tls dh params file = $tlsdir/dhparms.pem
-	panic action = $srcdir/script/gdb_backtrace \%PID% \%PROG%
-	wins support = yes
-	server role = $server_role
-	max xmit = 32K
-	server max protocol = SMB2
-	notify:inotify = false
-	ldb:nosync = true
-#We don't want to pass our self-tests if the PAC code is wrong
-	gensec:require_pac = true
-	log level = $smbd_loglevel
-
-[tmp]
-	path = $tmpdir
-	read only = no
-	ntvfs handler = posix
-	posix:sharedelay = 100000
-	posix:eadb = $lockdir/eadb.tdb
-	posix:oplocktimeout = 3
-	posix:writetimeupdatedelay = 500000
-
-[test1]
-	path = $tmpdir/test1
-	read only = no
-	ntvfs handler = posix
-	posix:sharedelay = 100000
-	posix:eadb = $lockdir/eadb.tdb
-	posix:oplocktimeout = 3
-	posix:writetimeupdatedelay = 500000
-
-[test2]
-	path = $tmpdir/test2
-	read only = no
-	ntvfs handler = posix
-	posix:sharedelay = 100000
-	posix:eadb = $lockdir/eadb.tdb
-	posix:oplocktimeout = 3
-	posix:writetimeupdatedelay = 500000
-
-[cifs]
-	read only = no
-	ntvfs handler = cifs
-	cifs:server = $netbiosname
-	cifs:share = tmp
-#There is no username specified here, instead the client is expected
-#to log in with kerberos, and smbd will used delegated credentials.
-
-[simple]
-	path = $tmpdir
-	read only = no
-	ntvfs handler = simple
-
-[sysvol]
-	path = $lockdir/sysvol
-	read only = yes
-
-[netlogon]
-	path = $lockdir/sysvol/$dnsname/scripts
-	read only = no
-
-[cifsposix]
-	copy = simple
-	ntvfs handler = cifsposix   
-";
-	close(CONFFILE);
-
-	$self->mk_keyblobs($tlsdir);
-
-	open(KRB5CONF, ">$krb5_config");
-	print KRB5CONF "
-#Generated krb5.conf for $realm
-
-[libdefaults]
- default_realm = $realm
- dns_lookup_realm = false
- dns_lookup_kdc = false
- ticket_lifetime = 24h
- forwardable = yes
-
-[realms]
- $realm = {
-  kdc = 127.0.0.1:88
-  admin_server = 127.0.0.1:88
-  default_domain = $dnsname
- }
- $dnsname = {
-  kdc = 127.0.0.1:88
-  admin_server = 127.0.0.1:88
-  default_domain = $dnsname
- }
- $domain = {
-  kdc = 127.0.0.1:88
-  admin_server = 127.0.0.1:88
-  default_domain = $dnsname
- }
-
-[appdefaults]
-	pkinit_anchors = FILE:$tlsdir/ca.pem
-
-[kdc]
-	enable-pkinit = true
-	pkinit_identity = FILE:$tlsdir/kdc.pem,$tlsdir/key.pem
-	pkinit_anchors = FILE:$tlsdir/ca.pem
-
-[domain_realm]
- .$dnsname = $realm
-";
-	close(KRB5CONF);
-
-	open(PWD, ">$nsswrap_passwd");
-	print PWD "
-root:x:0:0:root gecos:$prefix_abs:/bin/false
-$unix_name:x:$unix_uid:$unix_gids[0]:$unix_name gecos:$prefix_abs:/bin/false
-nobody:x:65534:65533:nobody gecos:$prefix_abs:/bin/false
-";
-	close(PWD);
-
-	open(GRP, ">$nsswrap_group");
-	print GRP "
-root:x:0:
-wheel:x:10:
-users:x:100:
-nobody:x:65533:
-nogroup:x:65534:nobody
-";
-	close(GRP);
-
-#Ensure the config file is valid before we start
-	if (system("$self->{bindir}/testparm $configuration -v --suppress-prompt >/dev/null 2>&1") != 0) {
-		system("$self->{bindir}/testparm -v --suppress-prompt $configuration >&2");
-		die("Failed to create a valid smb.conf configuration!");
-	}
-
-	(system("($self->{bindir}/testparm $configuration -v --suppress-prompt --parameter-name=\"netbios name\" --section-name=global 2> /dev/null | grep -i \"^$netbiosname\" ) >/dev/null 2>&1") == 0) or die("Failed to create a valid smb.conf configuration! $self->{bindir}/testparm $configuration -v --suppress-prompt --parameter-name=\"netbios name\" --section-name=global");
-
-	my @provision_options = ();
-	push (@provision_options, "NSS_WRAPPER_PASSWD=\"$nsswrap_passwd\"");
-	push (@provision_options, "NSS_WRAPPER_GROUP=\"$nsswrap_group\"");
-	if (defined($ENV{GDB_PROVISION})) {
-		push (@provision_options, "gdb --args python");
-	}
-	if (defined($ENV{VALGRIND_PROVISION})) {
-		push (@provision_options, "valgrind");
-	}
-	push (@provision_options, "$self->{setupdir}/provision");
-	push (@provision_options, split(' ', $configuration));
-	push (@provision_options, "--host-name=$netbiosname");
-	push (@provision_options, "--host-ip=$ifaceipv4");
-	push (@provision_options, "--quiet");
-	push (@provision_options, "--domain=$domain");
-	push (@provision_options, "--realm=$realm");
-	push (@provision_options, "--adminpass=$password");
-	push (@provision_options, "--krbtgtpass=krbtgt$password");
-	push (@provision_options, "--machinepass=machine$password");
-	push (@provision_options, "--root=$unix_name");
-
-	push (@provision_options, "--server-role=\"$server_role\"");
-
-	my $ldap_uri= "$ldapdir/ldapi";
-	$ldap_uri =~ s|/|%2F|g;
-	$ldap_uri = "ldapi://$ldap_uri";
-
-	my $ret = {
-		KRB5_CONFIG => $krb5_config,
-		PIDDIR => $piddir,
-		SERVER => $netbiosname,
-		SERVER_IP => $ifaceipv4,
-		NETBIOSNAME => $netbiosname,
-		NETBIOSALIAS => $netbiosalias,
-		LDAP_URI => $ldap_uri,
-		DOMAIN => $domain,
-		USERNAME => $username,
-		REALM => $realm,
-		PASSWORD => $password,
-		LDAPDIR => $ldapdir,
-		WINBINDD_SOCKET_DIR => $winbindd_socket_dir,
-		NCALRPCDIR => $ncalrpcdir,
-		LOCKDIR => $lockdir,
-		CONFIGURATION => $configuration,
-		SOCKET_WRAPPER_DEFAULT_IFACE => $swiface,
-		NSS_WRAPPER_PASSWD => $nsswrap_passwd,
-		NSS_WRAPPER_GROUP => $nsswrap_group,
-	};
-
-	if (defined($self->{ldap})) {
-
-                push (@provision_options, "--ldap-backend=$ldap_uri");
-	        system("$self->{setupdir}/provision-backend $configuration --ldap-admin-pass=$password --root=$unix_name --realm=$realm --domain=$domain --host-name=$netbiosname --ldap-backend-type=$self->{ldap}>&2") == 0 or die("backend provision failed");
-
-	        push (@provision_options, "--password=$password");
-
-	        if ($self->{ldap} eq "openldap") {
-	               push (@provision_options, "--username=samba-admin");
-		       ($ret->{SLAPD_CONF}, $ret->{OPENLDAP_PIDFILE}) = $self->mk_openldap($ldapdir, $configuration) or die("Unable to create openldap directories");
-		       push (@provision_options, "--ldap-backend-type=openldap");
-	        } elsif ($self->{ldap} eq "fedora-ds") {
-	               push (@provision_options, "--simple-bind-dn=cn=Manager,$localbasedn");
-		       ($ret->{FEDORA_DS_DIR}, $ret->{FEDORA_DS_PIDFILE}) = $self->mk_fedora_ds($ldapdir, $configuration) or die("Unable to create fedora ds directories");
-		       push (@provision_options, "--ldap-backend-type=fedora-ds");
-                 }
-
-		$self->slapd_start($ret) or 
-			die("couldn't start slapd");
-	}
-
-	my $provision_cmd = join(" ", @provision_options);
-	(system($provision_cmd) == 0) or die("Unable to provision: \n$provision_cmd\n");
-
-	if (defined($self->{ldap})) {
-		$self->slapd_stop($ret) or 
-			die("couldn't stop slapd");
-        }
-
-	return $ret; 
-}
-
-sub provision_member($$$)
-{
-	my ($self, $prefix, $dcvars) = @_;
-	print "PROVISIONING MEMBER...";
-
-	my $ret = $self->provision($prefix,
-				   "member server",
-				   "localmember3",
-				   "localmember",
-				   3,
-				   "localmemberpass");
-
-	$ret or die("Unable to provision");
-
-	my $cmd = "";
-	$cmd .= "SOCKET_WRAPPER_DEFAULT_IFACE=\"$ret->{SOCKET_WRAPPER_DEFAULT_IFACE}\" ";
-	$cmd .= "KRB5_CONFIG=\"$ret->{KRB5_CONFIG}\" ";
-	$cmd .= "$self->{bindir}/net join $ret->{CONFIGURATION} $dcvars->{DOMAIN} member";
-	$cmd .= " -U$dcvars->{USERNAME}\%$dcvars->{PASSWORD}";
-
-	system($cmd) == 0 or die("Join failed\n$cmd");
-
-	$ret->{SMBD_TEST_FIFO} = "$prefix/smbd_test.fifo";
-	$ret->{SMBD_TEST_LOG} = "$prefix/smbd_test.log";
-	$ret->{SMBD_TEST_LOG_POS} = 0;
-
-	$ret->{DC_SERVER} = $dcvars->{SERVER};
-	$ret->{DC_SERVER_IP} = $dcvars->{SERVER_IP};
-	$ret->{DC_NETBIOSNAME} = $dcvars->{NETBIOSNAME};
-	$ret->{DC_NETBIOSALIAS} = $dcvars->{NETBIOSALIAS};
-	$ret->{DC_USERNAME} = $dcvars->{USERNAME};
-	$ret->{DC_PASSWORD} = $dcvars->{PASSWORD};
-
-	return $ret;
-}
-
-sub provision_dc($$)
-{
-	my ($self, $prefix) = @_;
-
-	print "PROVISIONING DC...";
-	my $ret = $self->provision($prefix,
-				   "domain controller",
-				   "localdc1",
-				   "localdc",
-				   1,
-				   "localdcpass");
-
-	$self->add_wins_config("$prefix/private") or 
-		die("Unable to add wins configuration");
-
-	$ret->{SMBD_TEST_FIFO} = "$prefix/smbd_test.fifo";
-	$ret->{SMBD_TEST_LOG} = "$prefix/smbd_test.log";
-	$ret->{SMBD_TEST_LOG_POS} = 0;
-	return $ret;
-}
-
-sub teardown_env($$)
-{
-	my ($self, $envvars) = @_;
-	my $pid;
-
-	close(DATA);
-
-	if (-f "$envvars->{PIDDIR}/smbd.pid" ) {
-		open(IN, "<$envvars->{PIDDIR}/smbd.pid") or die("unable to open smbd pid file");
-		$pid = <IN>;
-		close(IN);
-
-		# Give the process 20 seconds to exit.  gcov needs
-		# this time to write out the covarge data
-		my $count = 0;
-		until (kill(0, $pid) == 0) {
-		    # if no process sucessfully signalled, then we are done
-		    sleep(1);
-		    $count++;
-		    last if $count > 20;
-		}
-		
-		# If it is still around, kill it
-		if ($count > 20) {
-		    print "smbd process $pid took more than $count seconds to exit, killing\n";
-		    kill 9, $pid;
-		}
-	}
-
-	my $failed = $? >> 8;
-
-	$self->slapd_stop($envvars) if ($self->{ldap});
-
-	print $self->getlog_env($envvars);
-
-	return $failed;
-}
-
-sub getlog_env($$)
-{
-	my ($self, $envvars) = @_;
-	my $title = "SMBD LOG of: $envvars->{NETBIOSNAME}\n";
-	my $out = $title;
-
-	open(LOG, "<$envvars->{SMBD_TEST_LOG}");
-
-	seek(LOG, $envvars->{SMBD_TEST_LOG_POS}, SEEK_SET);
-	while (<LOG>) {
-		$out .= $_;
-	}
-	$envvars->{SMBD_TEST_LOG_POS} = tell(LOG);
-	close(LOG);
-
-	return "" if $out eq $title;
- 
-	return $out;
-}
-
-sub check_env($$)
-{
-	my ($self, $envvars) = @_;
-
-	return 1 if (-p $envvars->{SMBD_TEST_FIFO});
-
-	print $self->getlog_env($envvars);
-
-	return 0;
-}
-
-sub setup_env($$$)
-{
-	my ($self, $envname, $path) = @_;
-
-	if ($envname eq "dc") {
-		return $self->setup_dc("$path/dc");
-	} elsif ($envname eq "member") {
-		if (not defined($self->{vars}->{dc})) {
-			$self->setup_dc("$path/dc");
-		}
-		return $self->setup_member("$path/member", $self->{vars}->{dc});
-	} else {
-		die("Samba4 can't provide environment '$envname'");
-	}
-}
-
-sub setup_member($$$$)
-{
-	my ($self, $path, $dc_vars) = @_;
-
-	my $env = $self->provision_member($path, $dc_vars);
-
-	$self->check_or_start($env, ($ENV{SMBD_MAXTIME} or 7500));
-
-	$self->wait_for_start($env);
-
-	return $env;
-}
-
-sub setup_dc($$)
-{
-	my ($self, $path) = @_;
-
-	my $env = $self->provision_dc($path);
-
-	$self->check_or_start($env, 
-		($ENV{SMBD_MAXTIME} or 7500));
-
-	$self->wait_for_start($env);
-
-	$self->{vars}->{dc} = $env;
-
-	return $env;
-}
-
-sub stop($)
-{
-	my ($self) = @_;
-}
-
-1;
diff --git a/source4/selftest/target/Windows.pm b/source4/selftest/target/Windows.pm
deleted file mode 100644
index d0c90d7f7b5..00000000000
--- a/source4/selftest/target/Windows.pm
+++ /dev/null
@@ -1,40 +0,0 @@
-#!/usr/bin/perl
-# Bootstrap Samba and run a number of tests against it.
-# Copyright (C) 2005-2007 Jelmer Vernooij <jelmer@samba.org>
-# Published under the GNU GPL, v3 or later.
-
-package Windows;
-
-use strict;
-use FindBin qw($RealBin);
-use POSIX;
-
-sub new($)
-{
-	my ($classname) = @_;
-	my $self = { };
-	bless $self;
-	return $self;
-}
-
-sub provision($$$)
-{
-	my ($self, $environment, $prefix) = @_;
-
-	die ("Windows tests will not run without root privileges.") 
-		if (`whoami` ne "root");
-
-	die("Environment variable WINTESTCONF has not been defined.\n".
-		"Windows tests will not run unconfigured.") if (not defined($ENV{WINTESTCONF}));
-
-	die ("$ENV{WINTESTCONF} could not be read.") if (! -r $ENV{WINTESTCONF});
-
-	$ENV{WINTEST_DIR}="$ENV{SRCDIR}/selftest/win";
-}
-
-sub setup_env($$)
-{
-	my ($self, $name) = @_;
-}
-
-1;
diff --git a/source4/selftest/test_samba4.pl b/source4/selftest/test_samba4.pl
deleted file mode 100755
index f2935be66bc..00000000000
--- a/source4/selftest/test_samba4.pl
+++ /dev/null
@@ -1,20 +0,0 @@
-#!/usr/bin/perl
-
-use Test::More tests => 3;
-use FindBin qw($RealBin);
-use lib $RealBin;
-use Samba4;
-
-my $s = new Samba4($RealBin."/../bin", undef, $RealBin."/../setup");
-
-ok($s);
-
-is($RealBin."/../bin", $s->{bindir});
-
-ok($s->write_ldb_file("tmpldb", "
-dn: a=b
-a: b
-c: d
-"));
-
-unlink("tmpldb");
diff --git a/source4/selftest/test_subunit.pl b/source4/selftest/test_subunit.pl
deleted file mode 100755
index 28522ed49f3..00000000000
--- a/source4/selftest/test_subunit.pl
+++ /dev/null
@@ -1,7 +0,0 @@
-#!/usr/bin/perl
-
-use Test::More tests => 0;
-use FindBin qw($RealBin);
-use lib $RealBin;
-use Subunit qw(parse_results);
-
diff --git a/source4/selftest/test_w2k3.sh b/source4/selftest/test_w2k3.sh
deleted file mode 100755
index 3cd034d0003..00000000000
--- a/source4/selftest/test_w2k3.sh
+++ /dev/null
@@ -1,48 +0,0 @@
-#!/bin/sh
-
-# tests that should pass against a w2k3 DC, as administrator
-
-# add tests to this list as they start passing, so we test
-# that they stay passing
-ncacn_np_tests="RPC-SCHANNEL RPC-DSSETUP RPC-EPMAPPER RPC-SAMR RPC-WKSSVC RPC-SRVSVC RPC-EVENTLOG RPC-NETLOGON RPC-LSA RPC-SAMLOGON RPC-SAMSYNC RPC-MULTIBIND RPC-WINREG RPC-SPOOLSS RPC-SPOOLSS-WIN"
-ncacn_ip_tcp_tests="RPC-SCHANNEL RPC-EPMAPPER RPC-SAMR RPC-NETLOGON RPC-LSA RPC-SAMLOGON RPC-SAMSYNC RPC-MULTIBIND"
-
-if [ $# -lt 4 ]; then
-cat <<EOF
-Usage: test_w2k3.sh SERVER USERNAME PASSWORD DOMAIN REALM
-EOF
-exit 1;
-fi
-
-server="$1"
-username="$2"
-password="$3"
-domain="$4"
-realm="$5"
-shift 5
-
-incdir=`dirname $0`
-. $incdir/test_functions.sh
-
-OPTIONS="-U$username%$password -W $domain --option realm=$realm"
-
-name="RPC-SPOOLSS on ncacn_np"
-testit "$name" rpc bin/smbtorture $TORTURE_OPTIONS ncacn_np:"$server" $OPTIONS RPC-SPOOLSS "$*"
-
-for bindoptions in padcheck connect sign seal ntlm,sign ntlm,seal $VALIDATE bigendian; do
-   for transport in ncacn_ip_tcp ncacn_np; do
-     case $transport in
-	 ncacn_np) tests=$ncacn_np_tests ;;
-	 ncacn_ip_tcp) tests=$ncacn_ip_tcp_tests ;;
-     esac
-   for t in $tests; do
-    name="$t on $transport with $bindoptions"
-    testit "$name" rpc bin/smbtorture $TORTURE_OPTIONS $transport:"$server[$bindoptions]" $OPTIONS $t "$*"
-   done
- done
-done
-
-name="RPC-DRSUAPI on ncacn_ip_tcp with seal"
-testit "$name" rpc bin/smbtorture $TORTURE_OPTIONS ncacn_ip_tcp:"$server[seal]" $OPTIONS RPC-DRSUAPI "$*"
-name="RPC-DRSUAPI on ncacn_ip_tcp with seal,bigendian"
-testit "$name" rpc bin/smbtorture $TORTURE_OPTIONS ncacn_ip_tcp:"$server[seal,bigendian]" $OPTIONS RPC-DRSUAPI "$*"
diff --git a/source4/selftest/samba4_tests.sh b/source4/selftest/tests.sh
index 3c2bb134b0a..eff06f588e0 100755
--- a/source4/selftest/samba4_tests.sh
+++ b/source4/selftest/tests.sh
@@ -23,8 +23,6 @@ then
 	PERL=perl
 fi
 
-incdir=`dirname $0`
-
 plantest() {
 	name=$1
 	env=$2
@@ -56,9 +54,9 @@ plansmbtorturetest() {
 	plantest "$modname" "$env" $cmdline
 }
 
-$incdir/../bin/smbtorture -V
+bin/smbtorture -V
 
-samba4srcdir=$incdir/..
+samba4srcdir=.
 samba4bindir=$samba4srcdir/bin
 SCRIPTDIR=$samba4srcdir/../testprogs/ejs
 smb4torture="$samba4bindir/smbtorture $TORTURE_OPTIONS"
@@ -267,7 +265,7 @@ fi
 # the API. These mainly test that the various command-line options of commands 
 # work correctly.
 
-bbdir=$incdir/../../testprogs/blackbox
+bbdir=../testprogs/blackbox
 
 plantest "blackbox.ndrdump" dc $samba4srcdir/librpc/tests/test_ndrdump.sh
 plantest "blackbox.net" dc $samba4srcdir/utils/tests/test_net.sh "\$SERVER" "\$USERNAME" "\$PASSWORD" "\$DOMAIN"