build: Remove unused install*.sh scripts

Reviewed-by: Jelmer Vernooij <jelmer@samba.org>

Reviewed-by: David Disseldorp <ddiss@samba.org>

7 files changed, 0 insertions, 380 deletions

diff --git a/source3/script/installbin.sh.in b/source3/script/installbin.sh.in
deleted file mode 100755
index c607d9e445..0000000000
--- a/source3/script/installbin.sh.in
+++ /dev/null
@@ -1,34 +0,0 @@
-#!/bin/sh
-
-INSTALLPERMS=$1
-DESTDIR=$2
-prefix=`echo $3 | sed 's/\/\//\//g'`
-BINDIR=`echo $4 | sed 's/\/\//\//g'`
-SBINDIR=@sbindir@
-shift
-shift
-shift
-shift
-
-for p in $*; do
- p2=`basename $p`
- echo "Installing $p as $DESTDIR/$BINDIR/$p2 "
- if [ -f $DESTDIR/$BINDIR/$p2 ]; then
-   rm -f $DESTDIR/$BINDIR/$p2.old
-   mv $DESTDIR/$BINDIR/$p2 $DESTDIR/$BINDIR/$p2.old
- fi
- cp $p $DESTDIR/$BINDIR/
- chmod $INSTALLPERMS $DESTDIR/$BINDIR/$p2
-done
-
-
-cat << EOF
-======================================================================
-The binaries are installed. You may restore the old binaries (if there
-were any) using the command "make revert". You may uninstall the binaries
-using the command "make uninstallbin" or "make uninstall" to uninstall
-binaries, man pages and shell scripts.
-======================================================================
-EOF
-
-exit 0
diff --git a/source3/script/installdat.sh b/source3/script/installdat.sh
deleted file mode 100755
index 2cc3677fba..0000000000
--- a/source3/script/installdat.sh
+++ /dev/null
@@ -1,65 +0,0 @@
-#!/bin/sh
-#fist version March 2002, Herb  Lewis
-
-DESTDIR=$1
-DATDIR=`echo $2 | sed 's/\/\//\//g'`
-SRCDIR=$3/
-shift
-shift
-shift
-
-case $0 in
-	*uninstall*)
-		if test ! -d "$DESTDIR/$DATDIR"; then
-			echo "Directory $DESTDIR/$DATDIR does not exist! "
-			echo "Do a "make installmsg" or "make install" first. "
-			exit 1
-		fi
-		mode='uninstall'
-		;;
-	*) mode='install' ;;    
-esac
-
-for f in $SRCDIR/../codepages/*.dat; do
-	FNAME="$DESTDIR/$DATDIR/`basename $f`"
-	if test "$mode" = 'install'; then
-		echo "Installing $f as $FNAME "
-		cp "$f" "$FNAME"
-		if test ! -f "$FNAME"; then
-			echo "Cannot install $FNAME.  Does $USER have privileges? "
-			exit 1
-		fi
-		chmod 0644 "$FNAME"
-	elif test "$mode" = 'uninstall'; then
-		echo "Removing $FNAME "
-		rm -f "$FNAME"
-		if test -f "$FNAME"; then
-			echo "Cannot remove $FNAME.  Does $USER have privileges? "
-			exit 1
-		fi
-	else
-		echo "Unknown mode, $mode.  Script called as $0 "
-		exit 1
-	fi
-done
-
-if test "$mode" = 'install'; then
-	cat << EOF
-======================================================================
-The dat files have been installed.  You may uninstall the dat files
-using the command "make uninstalldat" or "make uninstall" to uninstall
-binaries, man pages, dat files, and shell scripts.
-======================================================================
-EOF
-else
-	cat << EOF
-======================================================================
-The dat files have been removed.  You may restore these files using
-the command "make installdat" or "make install" to install binaries, 
-man pages, modules, dat files, and shell scripts.
-======================================================================
-EOF
-fi
-
-exit 0
-
diff --git a/source3/script/installdirs.sh b/source3/script/installdirs.sh
deleted file mode 100755
index 062b34b8c6..0000000000
--- a/source3/script/installdirs.sh
+++ /dev/null
@@ -1,18 +0,0 @@
-#!/bin/sh
-
-INSTALLPERMS=$1
-DESTDIR=`echo $2 | sed 's/\/\//\//g'`
-shift
-shift
-
-for dir in $@; do
-	DIRNAME=`echo $dir | sed 's/\/\//\//g'`
-	if [ ! -d $DESTDIR/$DIRNAME ]; then
-		mkdir -m $INSTALLPERMS -p $DESTDIR/$DIRNAME
-	fi
-
-	if [ ! -d $DESTDIR/$DIRNAME ]; then
-		echo "Failed to make directory $DESTDIR/$DIRNAME "
-		exit 1
-	fi
-done
diff --git a/source3/script/installman.sh b/source3/script/installman.sh
deleted file mode 100755
index b029089ab2..0000000000
--- a/source3/script/installman.sh
+++ /dev/null
@@ -1,87 +0,0 @@
-#!/bin/sh
-#5 July 96 Dan.Shearer@unisa.edu.au  removed hardcoded values
-#
-# 13 Aug 2001  Rafal Szczesniak <mimir@spin.ict.pwr.wroc.pl>
-#   modified to accomodate international man pages (inspired
-#   by Japanese edition's approach)
-
-MANDIR=`echo $1 | sed 's/\/\//\//g'`
-SRCDIR=$2/
-langs=$3
-
-if [ $# -ge 4 ] ; then
-  GROFF=$4                    # sh cmd line, including options 
-fi
-
-if test ! -d $SRCDIR../bin/docs/manpages; then
-	echo "No manpages present.  Development version maybe?"
-	exit 0
-fi
-
-# Get the configured feature set
-test -f "${SRCDIR}/config.log" && \
-	eval `grep "^[[:alnum:]]*=.*" "${SRCDIR}/config.log" |
-	      grep -v ^MANDIR | grep -v ^SRCDIR`
-
-for lang in $langs; do
-    if [ "X$lang" = XC ]; then
-	echo Installing default man pages in $MANDIR/
-	lang=.
-    else
-	echo Installing \"$lang\" man pages in $MANDIR/lang/$lang
-    fi
-
-    langdir=$MANDIR/$lang
-    for d in $MANDIR $langdir $langdir/man1 $langdir/man5 $langdir/man7 $langdir/man8; do
-	if [ ! -d $d ]; then
-	    mkdir $d
-	    if [ ! -d $d ]; then
-		echo Failed to make directory $d, does $USER have privileges?
-		exit 1
-	    fi
-	fi
-    done
-
-    for sect in 1 5 7 8 ; do
-	for m in $langdir/man$sect ; do
-	    for s in $SRCDIR../bin/docs/manpages/$lang/*$sect; do
-	    MP_BASENAME=`basename $s`
-
-	    # Check if this man page if required by the configured feature set
-	    case "${MP_BASENAME}" in
-	    	smbsh.1) test -z "${SMBWRAPPER}" && continue ;;
-		*) ;;
-	    esac
-
-	    FNAME="$m/${MP_BASENAME}"
-
-	    # Test for writability.  Involves 
-	    # blowing away existing files.
- 
-	    if (rm -f $FNAME && touch $FNAME); then
-		if [ "x$GROFF" = x ] ; then
-		    cp $s $m            # Copy raw nroff 
-		else
-		    echo "\t$FNAME"     # groff'ing can be slow, give the user
-					#   a warm fuzzy.
-		    $GROFF $s > $FNAME  # Process nroff, because man(1) (on
-					#   this system) doesn't .
-		fi
-		chmod 0644 $FNAME
-	    else
-		echo Cannot create $FNAME... does $USER have privileges?
-	    fi
-	    done
-	done
-    done
-done
-cat << EOF
-======================================================================
-The man pages have been installed. You may uninstall them using the command
-the command "make uninstallman" or make "uninstall" to uninstall binaries,
-man pages and shell scripts.
-======================================================================
-EOF
-
-exit 0
-
diff --git a/source3/script/installmo.sh b/source3/script/installmo.sh
deleted file mode 100755
index 5ca3371d80..0000000000
--- a/source3/script/installmo.sh
+++ /dev/null
@@ -1,87 +0,0 @@
-#!/bin/sh
-
-DESTDIR=$1
-LOCALEDIR=`echo $2 | sed 's/\/\//\//g'`
-SRCDIR=$3/
-MSGFMT=msgfmt
-
-case $0 in
-	*uninstall*)
-		if test ! -d "$DESTDIR/$LOCALEDIR"; then
-			echo "Directory $DESTDIR/$LOCALEDIR doesn't exist!"
-			echo "Do a \"make installmo\" or \"make install\" first."
-			exit 1
-		fi
-		mode='uninstall'
-	;;
-	*)
-		mode='install'
-	;;
-esac
-
-for dir in $SRCDIR/locale/*; do
-	MODULE=`basename $dir`
-	for f in $SRCDIR/locale/$MODULE/*.po; do
-		BASE=`basename $f`
-		LANGUAGE=`echo $BASE | sed 's/\.po//g'`
-		if test "$LANGUAGE" = '*'; then
-			echo "No .po file exists!"
-			exit 0
-		fi
-		FNAME="$DESTDIR/$LOCALEDIR/$LANGUAGE/LC_MESSAGES/$MODULE.mo"
-		if test ! -d "$DESTDIR/$LOCALEDIR/$LANGUAGE/LC_MESSAGES/"; then
-			mkdir -p "$DESTDIR/$LOCALEDIR/$LANGUAGE/LC_MESSAGES/"
-		fi
-		if test "$mode" = 'install'; then
-			echo "Installing $f as $FNAME"
-			touch "$FNAME"
-			$MSGFMT -f -o "$FNAME" "$f"
-			if test ! -f "$FNAME"; then
-				echo "Cannot install $FNAME. Does $USER have privileges?"
-				exit 1
-			fi
-			chmod 0644 "$FNAME"
-		elif test "$mode" = 'uninstall'; then
-			echo "removing $FNAME"
-			rm -f "$FNAME"
-			if test -f "$FNAME"; then
-				echo "Cannot remove $FNAME. Does $USER have privileges?"
-				exit 1
-			fi
-		else
-			echo "Unknown mode $mode. script called as $0."
-			exit 1
-		fi
-	done
-	if test "$mode" = 'install'; then
-		cat << EOF
-==============================================================
-MO files for $MODULE are installed.
-==============================================================
-EOF
-	else
-		cat << EOF
-==============================================================
-MO files for $MODULE are removed.
-==============================================================
-EOF
-	fi
-done
-
-if test "$mode" = 'install'; then
-	cat << EOF
-==============================================================
-All MO files for Samba are installed. You can use "make uninstall"
-or "make uninstallmo" to remove them.
-==============================================================
-EOF
-else
-	cat << EOF
-==============================================================
-All MO files for Samba are removed. you can use "make install"
-or "make installmo" to install them.
-==============================================================
-EOF
-fi
-
-exit 0
diff --git a/source3/script/installmodules.sh b/source3/script/installmodules.sh
deleted file mode 100755
index 127091d808..0000000000
--- a/source3/script/installmodules.sh
+++ /dev/null
@@ -1,42 +0,0 @@
-#!/bin/sh
-
-INSTALLPERMS=$1
-DESTDIR=$2
-prefix=`echo $3 | sed 's/\/\//\//g'`
-LIBDIR=`echo $4 | sed 's/\/\//\//g'`
-shift
-shift
-shift
-shift
-
-for d in $prefix $LIBDIR; do
-if [ ! -d $DESTDIR/$d ]; then
-mkdir $DESTDIR/$d
-if [ ! -d $DESTDIR/$d ]; then
-  echo Failed to make directory $DESTDIR/$d
-  exit 1
-fi
-fi
-done
-
-# We expect the last component of LIBDIR to be the module type, eg. idmap,
-# pdb. By stripping this from the installation name, you can have multiple
-# modules of the same name but different types by creating eg. idmap_foo
-# and pdb_foo. This makes the most sense for idmap and pdb module, where
-# they need to be consistent.
-mtype=`basename $LIBDIR`
-
-for p in $*; do
- p2=`basename $p`
- name=`echo $p2 | sed -es/${mtype}_//`
- echo Preserving old module as $DESTDIR/$LIBDIR/$name.old
- if [ -f $DESTDIR/$LIBDIR/$name ]; then
-   rm -f $DESTDIR/$LIBDIR/$name.old
-   mv $DESTDIR/$LIBDIR/$name $DESTDIR/$LIBDIR/$name.old
- fi
- echo Installing $p as $DESTDIR/$LIBDIR/$name
- cp -f $p $DESTDIR/$LIBDIR/$name
- chmod $INSTALLPERMS $DESTDIR/$LIBDIR/$name
-done
-
-exit 0
diff --git a/source3/script/installscripts.sh b/source3/script/installscripts.sh
deleted file mode 100755
index 81608c3682..0000000000
--- a/source3/script/installscripts.sh
+++ /dev/null
@@ -1,47 +0,0 @@
-#!/bin/sh
-# this script courtesy of James_K._Foote.PARC@xerox.com
-# 5 July 96 Dan.Shearer@UniSA.Edu.Au  Don't hardcode script names, get from Make
-
-INSTALLPERMS=$1
-BINDIR=`echo $2 | sed 's/\/\//\//g'`
-
-shift
-shift
-
-echo Installing scripts in $BINDIR
-
-for d in $BINDIR; do
- if [ ! -d $d ]; then
-  mkdir $d
-  if [ ! -d $d ]; then
-    echo Failed to make directory $d
-    echo Have you run installbin first?
-    exit 1
-  fi
- fi
-done
-
-for p in $*; do
-  p2=`basename $p`
-  echo Installing $BINDIR/$p2
-  if [ -f $BINDIR/$p2 ]; then
-    rm -f $BINDIR/$p2.old
-    mv $BINDIR/$p2 $BINDIR/$p2.old
-  fi
-  cp $p $BINDIR/
-  chmod $INSTALLPERMS $BINDIR/$p2
-  if [ ! -f $BINDIR/$p2 ]; then
-    echo Cannot copy $p2... does $USER have privileges?
-  fi
-done
-
-cat << EOF
-======================================================================
-The scripts have been installed. You may uninstall them using
-the command "make uninstallscripts" or "make install" to install binaries,
-man pages and shell scripts. You may recover the previous version (if any
-by "make revert".
-======================================================================
-EOF
-
-exit 0