Replace all Linux_ prefixes with Cura_ prefixes.

1 files changed, 0 insertions, 112 deletions

diff --git a/mof/Linux_Fan.mof b/mof/Linux_Fan.mof
deleted file mode 100644
index 33dc7d1..0000000
--- a/mof/Linux_Fan.mof
+++ /dev/null
@@ -1,112 +0,0 @@
-//
-// Linux_Fan.mof
-//
-
-#pragma locale ("en_US")
-//#pragma namespace ("root/cimv2")
-
-// ===================================================================
-// 	Linux_Fan
-// ===================================================================
-
-[ Provider("cmpi:cmpiLinux_FanProvider") ]
-class Linux_Fan : CIM_Fan {
-
-     [ Key, Override("DeviceID"),
-       Description("Uniquely identifies fan. It is a composition of
-       SysPath and Name glued with slash ('/').") ]
-     string DeviceID;
-
-     [ Override("Name"),
-       Description("Name of fan provided by system.") ]
-    string Name;
-
-     [ Description("Array of fan features, that are exposed through system
-     interface. In other words: those that are readible/writable."),
-       ValueMap { "1", "2", "3", "4", "5", "6", "7", "8" },
-       Values { "MinSpeed", "MaxSpeed", "Divisor", "Pulses", "Beep", 
-	"Alarm", "MinAlarm", "MaxAlarm" }
-     ]
-    uint16 AccessibleFeatures[];
-
-     [ Description("Minimum speed value."),
-       Write,
-       Units("Revolutions per Minute") ]
-    uint64 MinSpeed;
-
-     [ Description("Maximum speed value."),
-       Write,
-       Units("Revolutions per Minute") ]
-    uint64 MaxSpeed;
-
-     [ Description("Fan divisisor. It affects Minimum and Maximum speed value
-     and accuracy of readings. 
-     The drivers account for the 'fan divisor' in their calculation
-     of RPM. So changing the fan divisor will NOT change the
-     nominal RPM reading, it will only affect the minimum and maximum
-     readings and the accuracy of the readings.
-     The actual formula is RPM = (60 * 22500) / (count * divisor)"),
-       Write ]
-    uint32 Divisor;
-
-    [ Description("Number of tachometer pulses per fan revolution.
-      Integer value, typically between 1 and 4.
-      This value is a characteristic of the fan connected to the
-      device's input, so it has to be set in accordance with the fan
-      model."),
-      Write ]
-    uint32 Pulses;
-
-    [ Description("This indicates, whether a PC's speaker should beep
-    when an alarm occurs."),
-      Write ]
-    boolean Beep;
-
-     [ Description("ALARM warning indicating, that current speed is out of
-     range. This information is supplied by fan's chip driver.") ]
-    boolean Alarm;
-
-     [ Description("ALARM warning indicating, that current speed is below
-       the critical level. This information is supplied by fan's chip driver.")
-     ]
-    boolean MinAlarm;
-
-     [ Description("ALARM warning indicating, that current speed is above
-       the critical level. This information is supplied by fan's chip driver.")
-     ]
-    boolean MaxAlarm;
-
-};
-
-// ===================================================================
-// 	Linux_FanSensor
-// ===================================================================
-[ Provider("cmpi:cmpiLinux_FanSensorProvider") ]
-class Linux_FanSensor : CIM_NumericSensor {
-
-     [ Key, Override("DeviceID"),
-       Description("Uniquely identifies fan. It is a composition of
-       SysPath and Name glued with slash ('/').") ]
-     string DeviceID;
-
-     [ Override("Name"),
-       Description("Name of fan provided by system.") ]
-    string Name;
-
-};
-
-
-// ===================================================================
-// 	Associations
-// ===================================================================
-[ Association,
-  Provider("cmpi:cmpiLinux_FanAssociatedSensorProvider") ]
-class Linux_FanAssociatedSensor : CIM_AssociatedSensor {
-
-    [ Override("Antecedent") ]
-    Linux_FanSensor REF Antecedent;
-
-    [ Override("Dependent") ]
-    Linux_Fan REF Dependent;
-
-};