path: root/loader2/linuxrc.s390

#! /bin/sh
#
# Copyright (C) 2000-2003 by
#        Bernhard Rosenkraenzer <bero@redhat.com>
#        Oliver Paukstadt <opaukstadt@millenux.com>
#        Karsten Hopp <karsten@redhat.de>
#        Florian La Roche <laroche@redhat.com>
#        Nils Philippsen <nils@redhat.de>
#        Helge Deller <hdeller@redhat.de>
#        David Sainty <dsainty@redhat.com>
#
#    This program is free software; you can redistribute it and/or modify
#    it under the terms of the GNU General Public License as published by
#    the Free Software Foundation; either version 2 of the License, or
#    (at your option) any later version.
#
#    This program is distributed in the hope that it will be useful,
#    but WITHOUT ANY WARRANTY; without even the implied warranty of
#    MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
#    GNU General Public License for more details.
#
#    You should have received a copy of the GNU General Public License
#    along with this program; if not, write to the Free Software
#    Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
#
VERSION=1.01

export TEXTDOMAIN=s390installer
export TEXTDOMAINDIR=/usr/lib/locale

doshutdown()
{
	 exec /sbin/shutdown
	 exit 0
}

doreboot()
{
	 exec /sbin/shutdown -r
	 exit 0
}

startinetd()
{
	echo
	echo $"Starting telnetd and sshd to allow login over the network."
   echo $"Welcome to the Red Hat Linux install environment $VERSION for $S390ARCH" > /etc/issue.net
   echo $"Welcome to the Red Hat Linux install environment $VERSION for $S390ARCH" > /etc/motd
   echo >> /etc/motd

	/sbin/xinetd -stayalive -reuse -pidfile /tmp/xinetd.pid
	/sbin/sshd
	if [ -z "$RUNKS" ]; then
	  echo 
	  echo $"Connect now to $IPADDR to start the installation."
	  read
  	  while : ; do
			/bin/sh --login
			[ $? = 0 ] || break
	  done
	fi
}

S390ARCH=`uname -m`
if [ "$S390ARCH" = "s390" ]; then
   export S390ARCH="S/390"
else
   export S390ARCH="zSeries"
fi

echo $"Starting the $S390ARCH initrd to configure networking. Version is $VERSION"


# set up env vars as we do in init.c
if [ `uname -m` = "s390x" ]; then
	 LD_LIBRARY_PATH=/lib64:/usr/lib64:/usr/X11R6/lib64:/usr/kerberos/lib64:/lib:/usr/lib:/usr/X11R6/lib:/usr/kerberos/lib
else
	 LD_LIBRARY_PATH=/lib:/usr/lib:/usr/X11R6/lib:/usr/kerberos/lib
fi
export LD_LIBRARY_PATH

PATH="PATH=/usr/bin:/bin:/sbin:/usr/sbin:/mnt/sysimage/bin:/mnt/sysimage/usr/bin:/mnt/sysimage/usr/sbin:/mnt/sysimage/sbin:/mnt/sysimage/usr/X11R6/bin"
export PATH
HOME=/
export HOME
PYTHONPATH=/tmp/updates
export PYTHONPATH

# remount root fs rw
mount /dev/root /  -o remount,rw

mount -t proc none /proc
mount -t devpts /dev/pts /dev/pts
# limit output on x3270 console (well, not really -- need debugging now)
echo "8 4 1 1" > /proc/sys/kernel/printk

# make /tmp/ramfs
mount -t ramfs none /tmp

ifconfig lo 127.0.0.1 netmask 255.0.0.0
route add -host 127.0.0.1 dev lo 2>/dev/null

LO=""

[ -L /sbin/insmod ] && LO=".o"

# Parse configuration
# Check for missing parameters, prompt for them if necessary
while [ -z "$HOSTNAME" -o "$HOSTNAME" = "(none)" ]; do
	echo $"Enter the FQDN of your new Linux guest (e.g. s390.redhat.com):"
	read HOSTNAME
done
while [ -z "$NETTYPE" ]; do
	echo $"Enter which kind of network device do you intend to use"
   echo " (e.g. ctc, escon, iucv, eth, hsi, tr):"
	read NETTYPE
done
DEVICE=${NETTYPE}0
if [ ":$NETTYPE" != ":iucv" ]; then   # iucv is the only interface without chandev config
   while [ -z "$CHANDEV" ]; do
		echo $"Enter parameters you need to pass to the channel device layer."
		echo $"This includes the I/O ports of your ctc, escon, qeth, hsi and lcs devices."
		echo $"(e.g. \"ctc0,0x600,0x601\" will activate the ctc0 interface at I/O"
		echo $"ports 0x600,0x601)"
		echo $"Hipersocket interfaces need to be configured like qeth devices,"
		echo $"p.e. qeth0,0x3000,0x3001,0x3002"
		echo $"Additional parameters for QETH devices such as the portname"
		echo $"should be entered at the next prompt, not here !"
		read CHANDEV
   done
   echo "$CHANDEV" |grep -q "qeth"
	if [ "$?" = "0" ]; then
		if [ -z "$QETHPARM" ]; then
			echo $"Each OSA-Express feature in QDIO mode must be associated with a port name"
			echo $"Enter additional parameters for your QETH device"
			echo $"(e.g. \"add_parms,0x10,{lo_devno,hi_devno},portname:port_name\")"
			echo $"Press enter if you don't want to enter additional parameters"
			read QETHPARM
			if [ -z "$QETHPARM" ]; then
				echo $"You have been warned, but this will not work without an associated portname"
			fi
		fi
   fi
   echo "$CHANDEV" |grep -q "hsi"
	if [ "$?" = "0" ]; then
		if [ -z "$QETHPARM" ]; then
			echo $"Enter additional parameters for your HSI device"
			echo $"(e.g. \"add_parms,0x10,{lo_devno,hi_devno},portname:port_name\")"
			echo $"Press enter if you don't want to enter additional parameters"
			read QETHPARM
		fi
	fi
	[ -n "$CHANDEV" ]  && echo "noauto" >/proc/chandev
	[ -n "$CHANDEV" ]  && echo "$CHANDEV"  >/proc/chandev
   [ -n "$QETHPARM" ] && echo "$QETHPARM" >/proc/chandev
	[ -n "$CHANDEV" ]  && echo "reprobe" >/proc/chandev
fi
while [ -z "$IPADDR" ]; do
  echo $"Enter the IP address of your new Linux guest:"
  read IPADDR
done
while [ -z "$NETWORK" ]; do
  echo $"Enter the network address of the new Linux guest:"
  read NETWORK
done
if [ ":$NETTYPE" = ":eth" ] || [ ":$NETTYPE" = ":tr" ] || [ ":$NETTYPE" = ":hsi" ] || [ ":$NETTYPE" = ":lcs" ]; then
	 while [ -z "$NETMASK" ]; do
		  echo $"Enter the netmask for the new Linux guest (e.g. 255.255.255.0):"
		  read NETMASK
	 done
	 while [ -z "$BROADCAST" ]; do
		  echo $"Enter the broadcast address for the new Linux guest:"
		  read BROADCAST
	 done
	 while [ -z "$GATEWAY" ]; do
		  echo $"Enter your default gateway:"
		  read GATEWAY
	 done
    if echo "$CHANDEV" |grep -q "lcs"; then
		  if [ ":$NETTYPE" = ":tr" ]; then
			   TR="on"
        else
            LCS="on"
        fi
    fi
    # qeth and nettype!= eth  is hipersockets ! 
    if echo "$CHANDEV" |grep -q "qeth"; then
        if [ ":$NETTYPE" = ":eth" ]; then
            QETH="on"
		  elif [ ":$NETTYPE" = ":hsi" ]; then
			   HSI="on"
		  fi
    fi
else  # ctc0, escon0, iucv0
    if [ -z "$NETMASK" ]; then
        # If the user did not supply netmask, we add the right one.
        # Netmask MUST be present, or pumpSetupInterface() blows routes.
        NETMASK="255.255.255.255"
    fi
	 while [ -z "$GATEWAY" ]; do
		  echo $"Enter the IP of your ctc/escon/iucv point-to-point partner:"
		  read GATEWAY
	 done

	 if [ "$NETTYPE" = "ctc" -a -z "$MTU" ]; then
		  MTU="1500"
	 fi
	 if [ ":$NETTYPE" = ":iucv" ]; then
		  while [ -z "$IUCV" ]; do
			   echo $"Enter iucv kernel module options (usually iucv=HOST,"
			   echo $"where HOST is TCPIP for the VM TCP/IP service machine"
				echo $"or the name (in capital letters) of another"
				echo $"Linux guest:"
			   read IUCV
		  done
		  if [ $(echo "$IUCV" |cut -c 1-5) != "iucv=" ]; then
				IUCV="iucv=$IUCV"
		  fi
	 fi
fi
# don't ask for MTU, but use it if it has been set in the .parm file
# don't overwrite MMTU if it has been set for CTC
if [ -n "$MTU" -a -z "$MMTU" ]; then
	 MMTU="mtu $MTU"
fi

# configure network-interface
KERNELVERSION=`cat /proc/version | awk '{ print $3 }'`
if [ ":$NETTYPE" = ":ctc" -o ":$NETTYPE" = ":escon" ]; then
	insmod fsm$LO
	insmod ctc$LO
	ifconfig $DEVICE $IPADDR $MMTU pointopoint $GATEWAY
elif [ ":$NETTYPE" = ":iucv" ]; then
	insmod fsm$LO
	insmod iucv$LO
	insmod netiucv$LO $IUCV
	ifconfig $DEVICE $IPADDR $MMTU pointopoint $GATEWAY
	if [ -n "$IUCV" ]; then
		 echo "options netiucv $IUCV" >> /tmp/modules.conf
	fi
elif [ -n "$LCS" -o -n "$TR" ]; then
	insmod lcs$LO
	ifconfig $DEVICE $IPADDR $MMTU netmask $NETMASK broadcast $BROADCAST
	route add -net $NETWORK netmask $NETMASK dev $DEVICE 2>/dev/null
   echo "alias $DEVICE lcs" >> /tmp/modules.conf
elif [ -n "$QETH" -o -n "$HSI" ]; then
	if [ "$DEVICE" = "eth0" -a "$HSI" = "on" ]; then
		DEVICE="hsi0"
	fi
	insmod qdio$LO
	insmod qeth$LO
	ifconfig $DEVICE $IPADDR $MMTU netmask $NETMASK broadcast $BROADCAST
	route add -net $NETWORK netmask $NETMASK dev $DEVICE 2>/dev/null
	echo "alias $DEVICE qeth" >> /tmp/modules.conf
else
   echo $"Unknown network device, aborting installation"
   exit 1
fi

route add default gw $GATEWAY dev $DEVICE 2>/dev/null

if [ -z "$DNS" ]; then
	echo $"Enter your DNS server(s), separated by colons (:):"
	read DNS
fi
if [ -z "$DNS" ]; then
	echo $"You might encounter problems without a nameserver, especially"
	echo $"with FTP installs"
fi

if [ -n "$DNS" -a -z "$SEARCHDNS" ]; then
	echo $"Enter your DNS search domain(s) (if any), separated by colons (:):"
	read SEARCHDNS
fi

[ -n "$HOSTNAME" ] && hostname $HOSTNAME

# show interfaces and routing table
ifconfig -a
route -n

echo $"Starting portmap."
portmap

# convert to space-separated lists
if [ -n "$SEARCHDNS" ]; then
	SEARCHDNS=`echo $SEARCHDNS |sed -e 's/:/ /g'`
	for i in "$SEARCHDNS"; do echo "search $i"; done >> /etc/resolv.conf
fi
if [ -n "$DNS" ]; then
	DNS=`echo $DNS |sed -e 's/:/ /g'`
	for i in "$DNS"; do echo "nameserver $i"; done   >> /etc/resolv.conf
fi

if [ -z "$DASD" ]; then
   echo
   echo $"Enter DASD range (e.g. 200-203   or  200,201,202,203)"
   echo $"Press <Enter> for autoprobing (not recommended):"
   echo
   read DASD
fi
if [ -n "$DASD" ]; then
       echo "DASD=$DASD" > /tmp/dasd_ports
fi

grep -q ext3 /proc/filesystems
if [ "$?" != "0" ]; then
  insmod jbd$LO
  insmod ext3$LO
fi

# transfer options into install environment
cat > /tmp/install.cfg << EOF
LANG="$LANG"
S390ARCH="$S390ARCH"
TEXTDOMAIN="$TEXTDOMAIN"
TEXTDOMAINDIR="$TEXTDOMAINDIR"
CHANDEV="$CHANDEV"
QETHPARM="$QETHPARM"
HOSTNAME="$HOSTNAME"
DEVICE="$DEVICE"
NETTYPE="$NETTYPE"
IPADDR="$IPADDR"
GATEWAY="$GATEWAY"
MTU="$MTU"
NETWORK="$NETWORK"
NETMASK="$NETMASK"
BROADCAST="$BROADCAST"
DNS="$DNS"
SEARCHDNS="$SEARCHDNS"
LCS="$LCS"
QETH="$QETH"
HSI="$HSI"
TR="$TR"
IUCV="$IUCV"
ONBOOT="yes"
export LANG CHANDEV QETHPARM S390ARCH TEXTDOMAIN TEXTDOMAINDIR HSI
export HOSTNAME DEVICE NETTYPE IPADDR GATEWAY MTU
export NETWORK NETMASK BROADCAST DNS SEARCHDNS
export LCS QETH IUCV ONBOOT
export TR
EOF
# immediately read it in again to export these into the shell below
. /tmp/install.cfg
cat /tmp/install.cfg >> /etc/profile
cat > /tmp/netinfo << EOF
DEVICE=$DEVICE
ONBOOT=yes
BOOTPROTO=static
IPADDR=$IPADDR
NETMASK=$NETMASK
GATEWAY=$GATEWAY
BROADCAST=$BROADCAST
HOSTNAME=$HOSTNAME
DOMAIN=
MTU=$MTU
EOF

# so that the vars get propagated into the sshd shells
mkdir /.ssh
cat >> /.ssh/environment <<EOF
LD_LIBRARY_PATH=$LD_LIBRARY_PATH
PATH=$PATH
HOME=$HOME
PYTHONPATH=$PYTHONPATH
EOF

cat >> /etc/profile <<EOF
LD_LIBRARY_PATH=$LD_LIBRARY_PATH
PATH=$PATH
HOME=$HOME
PYTHONPATH=$PYTHONPATH
export LD_LIBRARY_PATH PATH HOME PYTHONPATH
EOF

if [ -n "$DISPLAY" ]; then
	 echo "export DISPLAY=$DISPLAY" >> /etc/profile
fi


if [ "$NETTYPE" = "ctc" -o "$NETTYPE" = "escon" -o "$NETTYPE" = "iucv" ]; then
   echo "REMIP=$GATEWAY" >> /tmp/netinfo 
   echo "export REMIP=$GATEWAY" >> /etc/profile
fi

# I'm tired of typing this out...
echo "loader" >> /.bash_history

echo -n $$ > /var/run/init.pid
# shutdown (halt) on SIGUSR1
trap doshutdown SIGUSR1
# reboot on SIGUSR2
trap doreboot SIGUSR2

startinetd

if [ -n "$RUNKS" ]; then
	 /sbin/loader
fi

doshutdown

# ;;; Local Variables: ***
# ;;; mode: sh ***
# ;;; tab-width:3 ***
# ;;; end: ***
# vim:ts=3:sw=3