diff options
author | Brian C. Lane <bcl@redhat.com> | 2012-06-20 15:34:11 -0700 |
---|---|---|
committer | Brian C. Lane <bcl@redhat.com> | 2012-06-20 15:34:11 -0700 |
commit | 7e1b1abc04a7dde1a4153d5e61bf0207f77d583c (patch) | |
tree | 5a184496f757df6a61c5fd423667b94ecdb04859 /data | |
parent | cbebb0210fba5ed5e74e01715f832d5e5929a8d5 (diff) | |
parent | 11b3901231af7e8f57aa362873d5d18caee14386 (diff) | |
download | anaconda-7e1b1abc04a7dde1a4153d5e61bf0207f77d583c.tar.gz anaconda-7e1b1abc04a7dde1a4153d5e61bf0207f77d583c.tar.xz anaconda-7e1b1abc04a7dde1a4153d5e61bf0207f77d583c.zip |
Merge branch 'master' into newui-merge
Conflicts:
Makefile.am
anaconda
anaconda.spec.in
loader/loader.c
loader/net.c
loader/unpack.c
po/POTFILES.in
pyanaconda/__init__.py
pyanaconda/bootloader.py
pyanaconda/cmdline.py
pyanaconda/constants.py
pyanaconda/dispatch.py
pyanaconda/errors.py
pyanaconda/flags.py
pyanaconda/iutil.py
pyanaconda/kickstart.py
pyanaconda/platform.py
pyanaconda/storage/__init__.py
pyanaconda/storage/devicetree.py
pyanaconda/storage/fcoe.py
pyanaconda/storage/formats/swap.py
pyanaconda/storage/iscsi.py
pyanaconda/storage/partitioning.py
pyanaconda/yuminstall.py
scripts/makeupdates
Diffstat (limited to 'data')
24 files changed, 3640 insertions, 73 deletions
diff --git a/data/70-anaconda.rules b/data/70-anaconda.rules index 139c1f5e6..a70225ed5 100644 --- a/data/70-anaconda.rules +++ b/data/70-anaconda.rules @@ -23,5 +23,7 @@ ENV{ID_FS_TYPE}=="isw_raid_member", IMPORT{program}="$env{ANACBIN}/mdadm --exami ENV{ID_FS_TYPE}=="LVM2_member", IMPORT{program}="$env{ANACBIN}/lvm pvs --config 'global {locking_type=4}' --units k --nosuffix --nameprefixes --rows --unquoted --noheadings -opv_name,pv_uuid,pv_size,pv_pe_count,pv_pe_alloc_count,pe_start,vg_name,vg_uuid,vg_size,vg_free,vg_extent_size,vg_extent_count,vg_free_count,pv_count $tempnode" ENV{ID_FS_TYPE}=="LVM2_member", IMPORT{program}="$env{ANACBIN}/lvm pvs --config 'global {locking_type=4}' --units k --nosuffix --nameprefixes --rows --unquoted --noheadings -olv_name,lv_uuid,lv_size,lv_attr $tempnode" +ENV{ID_FS_TYPE}=="btrfs", PROGRAM="$env{ANACBIN}/btrfs device scan $tempnode" + LABEL="anaconda_end" diff --git a/data/Makefile.am b/data/Makefile.am index 1ba03f5c8..c3bd58b62 100644 --- a/data/Makefile.am +++ b/data/Makefile.am @@ -29,6 +29,11 @@ langdir = $(datadir)/$(PACKAGE_NAME) lang_DATA = lang-names dist_lang_DATA = lang-table +if IS_S390 +shareddir = $(datadir)/$(PACKAGE_NAME) +dist_shared_SCRIPTS = linuxrc.s390 +endif + MAINTAINERCLEANFILES = Makefile.in lang-names: lang-table diff --git a/data/command-stubs/loadkeys-stub b/data/command-stubs/loadkeys-stub deleted file mode 100755 index 1fdc2c984..000000000 --- a/data/command-stubs/loadkeys-stub +++ /dev/null @@ -1,41 +0,0 @@ -#!/usr/bin/python -# -# loadkeys-stub -# -# Copyright (C) 2007 Red Hat, Inc. All rights reserved. -# -# This program is free software; you can redistribute it and/or modify -# it under the terms of the GNU General Public License as published by -# the Free Software Foundation; either version 2 of the License, or -# (at your option) any later version. -# -# This program is distributed in the hope that it will be useful, -# but WITHOUT ANY WARRANTY; without even the implied warranty of -# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -# GNU General Public License for more details. -# -# You should have received a copy of the GNU General Public License -# along with this program. If not, see <http://www.gnu.org/licenses/>. -# - -import os -import sys - -from pyanaconda import isys - -def usage(): - print "usage: %s keymap" %(sys.argv[0],) - sys.exit(1) - -def main(): - if len(sys.argv) != 2: - usage() - - try: - isys.loadKeymap(sys.argv[1]) - except SystemError: - pass - sys.exit(0) - -if __name__ == "__main__": - main() diff --git a/data/linuxrc.s390 b/data/linuxrc.s390 new file mode 100644 index 000000000..328049831 --- /dev/null +++ b/data/linuxrc.s390 @@ -0,0 +1,3079 @@ +#! /bin/bash + +# linuxrc.s390: init process of Red Hat's installer initrd for s390(x) +# Copyright (C) 2000-2004 by +# Bernhard Rosenkraenzer <bero@redhat.com> +# Oliver Paukstadt <opaukstadt@millenux.com> +# Karsten Hopp <karsten@redhat.de> +# Florian La Roche <laroche@redhat.com> +# Nils Philippsen <nils@redhat.de> +# Helge Deller <hdeller@redhat.de> +# David Sainty <dsainty@redhat.com> +# Copyright (C) IBM Corp. 2008,2009 +# Author: Steffen Maier <maier@de.ibm.com> +# +# This program is free software; you can redistribute it and/or modify +# it under the terms of the GNU General Public License as published by +# the Free Software Foundation; either version 2 of the License, or +# (at your option) any later version. +# +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program; if not, write to the Free Software +# Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA +# + +# prerequisites of this script to run inside the installer initrd: +# - udevadm and udevd need to be there +# - have /etc/udev/udev.conf with at least one comment line as content +# - if necessary, have udev rules +# - lsznet.raw and znetcontrolunits from s390utils-base in /lib/s390-tools +# - pack kernel modules and module-init-tools (no longer use busybox for that) +# - "multi on" in /etc/host.conf [RH bugs 486457,486461,483244] + +# TODOs: +# - make sure driver modules get loaded automatically +# - udev rule for lcs/ctcm vs. cu3088 + +# debug: set -x + +if [ "${0##*/}" = "reboot" ]; then + kill -USR2 1 + exit +elif [ "${0##*/}" = "halt" ]; then + kill -USR1 1 + exit +fi + +VERSION=1.2 + +export TEXTDOMAIN=s390installer +export TEXTDOMAINDIR=/usr/lib/locale + +# helper function to execute command in arguments and print command on stdout +function debug() { + # uncomment the following echo "$*" to enable debug output + #echo "$*" + $* +} + +# FIXME: maybe change to "$$" for production use, in case it wouldn't be init +declare -r INITPID="1" + +unset testing +[ "$$" != "$INITPID" ] && testing="1" +# uncomment the following test="1" to never execute sensitive commands +#testing="1" + +if [ "$RUNKS" = "0" ]; then + RUNKS="" +fi + +# ping command to use to test host availability (for gateway & dns servers) +PINGOPTS="-c 3 -w 30" +PING="ping $PINGOPTS" +PING6="ping6 $PINGOPTS" + +# helper function to disable commands while running outside the initrd +function tv() { + if [ -z "$testing" ]; then + $* + else + return 0 + fi +} + +function checkipv6() +{ + local ip=$1 + [ -z "$ip" ] && return 1 + /bin/ipcalc -c -6 "$ip" >/dev/null 2>&1 + return $? +} + +function checkipv4() +{ + local ip=$1 + [ -z "$ip" ] && return 1 + /bin/ipcalc -c -4 "$ip" >/dev/null 2>&1 + return $? +} + +function doshutdown() +{ + echo $"about to exec shutdown" + /sbin/umount -a -d -n >/dev/null 2>&1 + exec /sbin/shutdown + exit 0 +} + +function doreboot() +{ + if [ -e "/sys/firmware/reipl" ]; then + read REIPL_TYPE < /sys/firmware/reipl/reipl_type + echo "reipl_type=$REIPL_TYPE" + pushd /sys/firmware/reipl/$REIPL_TYPE >/dev/null 2>&1 + for i in *; do + echo "$i=`cat $i`" + done + popd >/dev/null 2>&1 + fi + + echo $"about to exec shutdown -r" + /sbin/umount -a -d -n >/dev/null 2>&1 + exec /sbin/shutdown -r + exit 0 +} + +function sysecho () { + file=$1 + shift + local i=1 + while [ $i -le 10 ] ; do + if [ ! -f "$file" ]; then + sleep 1 + i=$((i+1)) + else + break + fi + done + [ -f "$file" ] && echo $* > $file +} + +function dasd_settle() { + local dasd_status=/sys/bus/ccw/devices/$1/status + if [ ! -f $dasd_status ]; then + return 1 + fi + local i=1 + while [ $i -le 30 ] ; do + local status + read status < $dasd_status + case $status in + online|unformatted) + return 0 ;; + *) + sleep 0.1 + i=$((i+1)) ;; + esac + done + return 1 +} + +function dasd_settle_all() { + for dasdccw in $(cut -d '(' -f 1 /proc/dasd/devices) ; do + if ! dasd_settle $dasdccw ; then + echo $"Could not access DASD $dasdccw in time" + return 1 + fi + done + return 0 +} + +function startinetd() +{ + echo + echo $"Starting sshd to allow login over the network." + if [ -z "$testing" ]; then + echo $"Welcome to the anaconda install environment $VERSION for $S390ARCH" > /etc/issue.net + echo $"Welcome to the anaconda install environment $VERSION for $S390ARCH" > /etc/motd + echo >> /etc/motd + fi # testing + + /usr/sbin/sshd -f /etc/ssh/sshd_config.anaconda + if [ -z "$RUNKS" ]; then + echo + echo $"Connect now to $IPADDR and log in as user 'install' to start the installation." + echo $"E.g. using: ssh -x install@$IPADDR" + echo $"For VNC or text mode, disable X11 forwarding (recommended) with 'ssh -x'." + echo $"For X11, enable X11 forwarding with 'ssh -X'." + echo + echo $"You may log in as the root user to start an interactive shell." + read + while : ; do + /bin/sh --login + [ $? = 0 ] || break + done + fi +} + +# prints a canonocalized device bus ID for a given devno of any format +function canonicalize_devno() +{ + case ${#1} in + 3) echo "0.0.0${1}" ;; + 4) echo "0.0.${1}" ;; + *) echo "${1}" ;; + esac + return 0 +} + +# read file from CMS and write it to /tmp +function readcmsfile() # $1=dasdport $2=filename +{ + local dev + if [ $# -ne 2 ]; then return; fi + # precondition: udevd created dasda block device node + if ! dasd_cio_free -d $1 ; then + echo $"DASD $1 could not be cleared from device blacklist" + return 1 + fi + # precondition: dasd_eckd_mod driver incl. dependencies loaded, + # dasd_mod must be loaded without setting any DASD online + dev=$(canonicalize_devno $1) + if ! sysecho /sys/bus/ccw/devices/$dev/online 1; then + echo $"DASD $dev could not be set online" + return 1 + fi + udevadm settle + if ! dasd_settle $dev ; then + echo $"Could not access DASD $dev in time" + return 1 + fi + udevadm settle + if ! cmsfscat -d /dev/dasda -a $2 > /tmp/$2; then + echo $"Could not read conf file $2 on CMS DASD $1." + fi + if ! sysecho /sys/bus/ccw/devices/$dev/online 0; then + echo $"DASD $dev could not be set offline again" + return 1 + fi + udevadm settle + # consequences of no more module unload: loader can no longer + # use DASD module option to online DASDs and set other DASD parameters! +} + +# adaption of the same function in init.c (udevd gets started later) +function createDevices() +{ + awk '{ printf("mknod /dev/%s %s %s %s\n", $1, $2, $3, $4); + printf("chmod %s /dev/%s\n", $5, $1); + printf("chown %s /dev/%s\n", $6, $1); + }' <<EOF | sh +console c 5 1 600 root:root +null c 1 3 666 root:root +zero c 1 5 666 root:root +mem c 1 1 600 root:root +ptmx c 5 2 666 root:root +tty c 5 0 666 root:root +tty0 c 4 0 600 root:tty +tty1 c 4 1 600 root:tty +random c 1 8 644 root:root +urandom c 1 9 644 root:root +rtc c 10 135 644 root:root +EOF + # tty handling is different from init.c since s390 does not have all + for i in 2 3 4 5 6 7 8 9 ; do + ln -s console /dev/tty$i + done + mkdir /dev/pts + ln -s /proc/self/fd /dev/fd +} + +# approximately the main() function of init.c +function init_main() { + S390ARCH=$(uname -m) + if [ "$S390ARCH" = "s390" ]; then + export S390ARCH="S/390" + else + export S390ARCH="zSeries" + fi + + echo + echo $"Starting the $S390ARCH initrd to configure networking. Version is $VERSION" + + # set up env vars as we do in init.c + if [ $(uname -m) = "s390x" ]; then + LD_LIBRARY_PATH=/lib64:/usr/lib64:/usr/X11R6/lib64:/usr/kerberos/lib64:/lib:/usr/lib:/usr/X11R6/lib:/usr/kerberos/lib + else + LD_LIBRARY_PATH=/lib:/usr/lib:/usr/X11R6/lib:/usr/kerberos/lib + fi + export LD_LIBRARY_PATH + + PATH="$PATH:/usr/bin:/bin:/sbin:/usr/sbin:/mnt/sysimage/bin:/mnt/sysimage/usr/bin:/mnt/sysimage/usr/sbin:/mnt/sysimage/sbin:/mnt/sysimage/usr/X11R6/bin" + export PATH + HOME=/ + export HOME + PYTHONPATH=/tmp/updates + export PYTHONPATH + + if [ -z "$testing" ]; then + + mount -t proc none /proc + + mount -t tmpfs none /dev + createDevices + # udevd req'd by udevadm settle (/dev/.udev/queue) + # in readcmsfile, dialog_network_table, semantic_check_subchannels. + # (important: start udevd at the right time, e.g. after setup of /dev) + echo $"Starting udev..." + udevd --daemon + # debug: udevadm control --log-priority=debug + + udevadm control --env=ANACONDA=1 + + mount -t devpts /dev/pts /dev/pts + mount -t sysfs none /sys + + # remount root fs rw + mount /dev/root / -o remount,rw + + # limit output on 3270 console + # (console_loglevel of 4 is just right to not get driver info, + # e.g. from qeth, since that would mix up with the user dialog) + echo "4 4 1 7" > /proc/sys/kernel/printk + + # make /tmp/ramfs + mount -t ramfs none /tmp + + # start rsyslogd after mount of /tmp ramfs since it logs to /tmp/syslog + echo $"Starting rsyslogd..." + rsyslogd -c 4 + + ifconfig lo 127.0.0.1 netmask 255.0.0.0 + route add -host 127.0.0.1 dev lo + + echo -e "127.0.0.1\tlocalhost.localdomain localhost localhost4 localhost4.localdomain4" > /etc/hosts + echo -e "::1\t\tlocalhost.localdomain localhost localhost6 localhost6.localdomain6" >> /etc/hosts + + /bin/dbus-uuidgen --ensure & + [ $? != 0 ] && echo "error on calling /bin/dbus-uuidgen --ensure" + /bin/dbus-daemon --system & + [ $? != 0 ] && echo "error on calling /bin/dbus-daemon --system" + + fi # testing +} + +# trigger udev to automatically load device drivers +function udev_setup() { + if [ -z "$testing" ]; then + # debug: udevadm monitor & + udevadm trigger + udevadm settle + fi # testing +} + +# from here on accesses to sysfs try to follow +# linux/Documentation/sysfs-rules.txt + +### lsznet.raw integration + +declare -a nettable + +function read_lsznet_output() { + count=0 + local line + while read line; do + nettable[$count]="$line" + count=$((count + 1)) + # using the more sophisticated process substitution instead of temp file + # requires the symlink /dev/fd -> /proc/self/fd => createDevices + done < <(/lib/s390-tools/lsznet.raw) +} + +function print_nettable() { + local fmtstring="%3s %-14s %-7s %-5s %-4s %-6s %-7s %s\n" + printf "$fmtstring" \ + "NUM" "CARD" "CU" "CHPID" "TYPE" "DRIVER" "IF" "DEVICES" + local i + for ((i=0; i < count; i++)); do + local item cutype chp chpidtype devdrv devname chlist cardtype + read item cutype chp chpidtype devdrv devname chlist cardtype <<< ${nettable[$i]} + printf "$fmtstring" \ + $item "$cardtype" $cutype $chp "$chpidtype" $devdrv $devname $chlist + done +} + +function clear_screen() { + # FIXME: find a way to clear screen despite 3215 line mode terminal + echo +} + +function dialog_network_table() { + while : ; do + echo $"Scanning for available network devices..." + # This may take a long time so we show "progress": + #( while true; do echo -n "."; sleep 1; done ) & + #local childpid=$! + read_lsznet_output + #kill $childpid + #echo + echo $"Autodetection found ${count} devices." + # count==0: there might still be a blacklist the user wants to clear. + # do not flood user with long list if there are many devices + if [ "$count" -le 15 ]; then + # Show list + answer=s + else # [ $count -gt 15 ] + echo + while : ; do + echo $"s) show all, m) manual config:" + local answer + read answer + case $answer in + s|m) break ;; + esac + done + fi + [ "$answer" = "m" ] && break + # show network table to select network hardware configuration from + if [ "$count" -gt 0 ]; then + clear_screen + print_nettable + echo + fi + # account for possibly ignored common I/O devices + # cio_wc_bytes is NOT local so it can be re-used outside this function + cio_wc_bytes=0 + local cio_wc_filename cio_wc_foo + if [ -f /proc/cio_ignore ]; then + local cio_wc=$(wc -c /proc/cio_ignore) + read cio_wc_bytes cio_wc_filename cio_wc_foo <<< "$cio_wc" + if [ "$cio_wc_bytes" != "0" ]; then + echo $"Note: There is a device blacklist active! (Clearing might take long)" + #cat /proc/cio_ignore | tr '\n' ',' + #echo + else + if [ "$count" -eq 0 ]; then + # count==0 AND no device blacklist => manual mode + echo $"Entering manual configuration mode." + break + fi + fi + fi + # selection dialog + while : ; do + [ "$count" -gt 0 ] && echo -n $"<num>) use config, " + [ "$cio_wc_bytes" != "0" ] && echo -n $"c) clear blacklist, " + echo $"m) manual config, r) rescan, s) shell:" + local choice + read choice + [ -z "$choice" ] && continue + if [ "$choice" = "s" ]; then + echo $"Enter 'exit' at the shell prompt to get back to the installation dialog." + /bin/bash + continue 2 + fi + [ "$choice" = "m" ] && break + [ "$choice" = "r" ] && continue 2 + [ "$cio_wc_bytes" != "0" -a "$choice" = "c" ] && break + [[ "$choice" =~ ^[[:digit:]]+$ ]] + case $? in + 0) + # string matched the pattern + [ "$choice" -ge 1 -a "$choice" -le "$count" ] && break + ;; + 1) + # string did not match the pattern + continue + ;; + 2) + echo "l.$LINENO: syntax error in regex of match operator =~, code needs to be fixed" 1>&2 + ;; + *) + echo "l.$LINENO: unexpected return code of regex match operator =~, code needs to be fixed" 1>&2 + ;; + esac + done + if [ "$choice" = "c" ]; then + echo $"Clearing device blacklist..." + cio_ignore -R || echo $"Device blacklist could not be cleared" + fi + [ "$choice" = "m" ] && break + # finally extract config info from selected item + # array nettable starts at index zero, user input starts at index one + choice=$((choice - 1)) + local item cutype chp chpidtype devdrv devname chlist cardtype + read item cutype chp chpidtype devdrv devname chlist cardtype <<< ${nettable[$choice]} + # $NETTYPE happens to be exactly the network driver name + if [ "$devdrv" = "ctcm" ]; then + NETTYPE="ctc" + else + NETTYPE=$devdrv + fi + SUBCHANNELS=$chlist + break + done + echo +} + +declare -r PREFIXFORMAT=[[:xdigit:]]* +declare -r SSIDFORMAT=[0-3] +declare -r BUSIDFORMAT=[[:xdigit:]][[:xdigit:]][[:xdigit:]][[:xdigit:]] +declare -r IDFORMAT=$PREFIXFORMAT.$SSIDFORMAT.$BUSIDFORMAT +declare -r SUBCHANNEL_TYPE_IO=0 + +. /lib/s390-tools/znetcontrolunits + +function cardtype2cleartext() { + local cardtype=$1 + case $cardtype in + OSD_10GIG) echo "OSA card in OSD mode, 10 Gigabit Ethernet" ;; + OSD_1000) echo "OSA card in OSD mode, Gigabit Ethernet" ;; + OSD_100) echo "OSA card in OSD mode, Fast Ethernet" ;; + OSD_GbE_LANE) echo "OSA card in OSD mode, Gigabit Ethernet, LAN Emulation" ;; + OSD_FE_LANE) echo "OSA card in OSD mode, Fast Ethernet, LAN Emulation" ;; + OSD_TR_LANE) echo "OSA card in OSD mode, Token Ring, LAN Emulation" ;; + OSD_ATM_LANE) echo "OSA card in OSD mode, ATM, LAN Emulation" ;; + OSD_Express) echo "OSA card in OSD mode, unknown link type" ;; + HSTR) echo "OSA card in OSD mode, High Speed Token Ring" ;; + OSN) echo "OSA for NCP, ESCON/CDLC bridge" ;; + HiperSockets) echo "HiperSockets with CHPID type IQD" ;; + "GuestLAN QDIO") echo "GuestLAN based on OSA (QDIO)" ;; + "GuestLAN Hiper") echo "GuestLAN based on HiperSockets" ;; + unknown) echo "other" ;; + *) echo "unknown" + echo "l.$LINENO: found unknown card_type, code needs to be fixed" 1>&2 + ;; + esac +} + +# returns true iff running under z/VM +function isVM() { + local cpu_version=$(cat /proc/cpuinfo |grep "^processor " | head -n1 | sed 's/.*version = \([[:xdigit:]][[:xdigit:]]\).*/\1/' | tr '[:lower:]' '[:upper:]') + if [ "$cpu_version" = "FF" ]; then + return 0 + else + return 1 + fi +} + +# watch out: potential error message as side effect +function isLayer2Default() { + # Read default from sysfs because according to device + # drivers book there are differences in the default between + # OSA (l2), hipersockets (l3). + # This only works here in installer where nobody has overwritten + # the default setting with another custom value already! + if [ ! -f /sys/devices/${NETTYPE}/$SCH_R_DEVBUSID/layer2 ]; then + echo $"Could not read layer mode from sysfs" + return 1 + fi + local layer2 + read layer2 < /sys/devices/${NETTYPE}/$SCH_R_DEVBUSID/layer2 + if [ "$layer2" = "1" ]; then + return 0 + else + return 1 + fi +} + +# returns true iff either LAYER2 has been set to 1 or is the default +# watch out: potential error message as side effect +function isLayer2() { + case "x$LAYER2" in + x0) return 1 ;; # layer 3 + x1) return 0 ;; # layer 2 + x) # LAYER2 is unset or empty => qeth driver default applies. + isLayer2Default + return $? + ;; + *) echo "l.$LINENO: unknown value \"$LAYER2\" for LAYER2, code needs to be fixed" 1>&2 + return 2 ;; + esac +} + +# returns true iff qeth device $SCH_R_DEVBUSID +# is capable of supporting IPv6 +# watch out: potential error message as side effect +function ipv6_capable() { + [ "$NETTYPE" = "qeth" ] || return 1 + case $cardtype in + OSD_10GIG|OSD_1000|OSD_100|OSD_Express|HiperSockets|"GuestLAN QDIO") + return 0 ;; + OSD_GbE_LANE|OSD_FE_LANE|OSD_TR_LANE|OSD_ATM_LANE) return 1 ;; + HSTR|OSN|unknown) return 1 ;; + "GuestLAN Hiper") return 1 ;; + *) echo $"Unknown card_type to determine IPv6 support" + return 1 ;; + esac +} + +# sets device online _and_ retrieves DEVICE at the same time +function set_device_online() { + echo $"Activating network device..." + local sysnettype + case "${NETTYPE}" in + qeth|lcs) sysnettype=${NETTYPE} ;; + ctc) sysnettype=ctcm ;; + esac + if ! [ -f /sys/devices/${sysnettype}/$SCH_R_DEVBUSID/online ]; then + echo $"Sysfs path to set device online does not exist." + return 1 + fi + if ! sysecho /sys/devices/${sysnettype}/$SCH_R_DEVBUSID/online "1"; then + echo $"Could not set device ($SUBCHANNELS) online" + return 1 + fi + udevadm settle + local i=1 + while : ; do + local online + read online < /sys/devices/${sysnettype}/$SCH_R_DEVBUSID/online + [ "$online" == "1" ] && break + sleep 1 + i=$((i+1)) + if [ "$i" -gt 10 ]; then + echo $"Could not set device ($SUBCHANNELS) online within timeout" + return 1 + fi + done + if [ "$NETTYPE" = "lcs" -o "$NETTYPE" = "ctc" ]; then + if [ ! -d /sys/devices/${sysnettype}/$SCH_R_DEVBUSID/net ]; then + echo $"Device $SUBCHANNELS does not have required sysfs directory 'net'" + return 1 + fi + DEVICE=$(ls /sys/devices/${sysnettype}/$SCH_R_DEVBUSID/net/) + if [ "$DEVICE" = "" ]; then + echo $"Could not get device name for $SUBCHANNELS" + return 1 + fi + else # qeth + if [ ! -f /sys/devices/qeth/$SCH_R_DEVBUSID/if_name ]; then + echo $"Device $SUBCHANNELS does not have required sysfs attribute 'if_name'" + return 1 + fi + # (device needs to be online to read if_name from sysfs attribute!) + read DEVICE < /sys/devices/qeth/$SCH_R_DEVBUSID/if_name + if [ "$DEVICE" = "" ]; then + echo $"Could not get device name for $SUBCHANNELS" + return 1 + fi + if [ -f /sys/devices/qeth/$SCH_R_DEVBUSID/card_type ]; then + read cardtype < /sys/devices/qeth/$SCH_R_DEVBUSID/card_type + #debug echo "$cardtype" + # device is now online and link type will be known + echo -n $"Detected: " + cardtype2cleartext "$cardtype" + else + echo $"Could not read qeth network card type from sysfs." + fi + fi +} + +# sets device up and blocks until device appears to be up +function set_device_up() { + if [ -z "$DEVICE" ]; then + echo $"Could not determine interface name to bring up device $SUBCHANNELS" + return 1 + fi + # Device does not come up fast enough to use "ip" to configure, so block. + # While OSA come up themselves after setting online, + # e.g. HiperSockets won't => set them up explicitly for the following check + debug ip link set up $DEVICE + local i=1 + while : ; do + local tst=$(ip -o link show up dev $DEVICE) + [ -n "$tst" ] && break + sleep 1 + i=$((i+1)) + if [ "$i" -gt 10 ]; then + echo $"Could not bring up device $DEVICE within timeout" + return 1 + fi + done + return 0 +} + +function syntax_check_domainname() { + # - match against regex adopted from RFC1035,sec.2.3.1 or RFC1034,sec.3.5 + # (Internationalized Domain Names in Applications (IDNA) [RFC4690] + # have to be entered after encoding by punycode [RFC3492]) + [[ "$1" =~ ^[[:alpha:]]([[:alnum:]-]{0,61}[[:alnum:]])?(\.[[:alpha:]]([[:alnum:]-]{0,61}[[:alnum:]])?)*$ ]] + case $? in + 0) + # string matched the pattern + return 0 + ;; + 1) + # string did not match the pattern + echo "$2" + ;; + 2) + echo "l.$LINENO: syntax error in regex of match operator =~, code needs to be fixed" 1>&2 + ;; + *) + echo "l.$LINENO: unexpected return code of regex match operator =~, code needs to be fixed" 1>&2 + ;; + esac + return 1 +} + +function disable_ipv6_autoconf() { + sysctl -w net.ipv6.conf.all.accept_ra=0 > /dev/null + sysctl -w net.ipv6.conf.all.accept_redirects=0 > /dev/null + sysctl -w net.ipv6.conf.all.autoconf=0 > /dev/null + sysctl -w net.ipv6.conf.default.accept_ra=0 > /dev/null + sysctl -w net.ipv6.conf.default.accept_redirects=0 > /dev/null + sysctl -w net.ipv6.conf.default.autoconf=0 > /dev/null +} + +function configure_ipv6_address() { + # device needs to be online + # arp flag needs to be on for ipv6 over osa because of ndisc. + # happens automatically by the driver. do NOT mess with default setting. + #NO#debug ip link set dev $DEVICE arp on + if ! debug ip -6 address add $IPADDR/$NETMASK dev $DEVICE; then + echo $"Could net set IPv6 address $IPADDR/$NETMASK for device $DEVICE" + return 1 + fi + # network route has been set by above "ip address add" already + # take care of MTU, which is bundled with ifconfig in the other IPv4 cases + if [ -n "$MMTU" ]; then + if ! debug ip link set $DEVICE $MMTU; then + echo $"Could net set maximum transfer unit ($MMTU) for device $DEVICE" + return 1 + fi + fi + return 0 +} + +function configure_ipv4_address() { + # it's IPv4 and we can make use of ipcalc for better usability + if ipcalc -bmnp $ipcalc_arg > /tmp/ipcalc.$$.out 2> /dev/null; then + . /tmp/ipcalc.$$.out + else + echo $"Could not calculate network address and broadcast address from" + echo $" IPv4 address $IPADDR and netmask $NETMASK" + return 1 + fi + rm /tmp/ipcalc.$$.out + # device needs to be online + if ! debug ifconfig $DEVICE $IPADDR $MMTU netmask $NETMASK broadcast $BROADCAST; then + echo $"Could not set IPv4 address $IPADDR for device $DEVICE" + echo $" with network mask $NETMASK and broadcast address $BROADCAST" + [ -n "$MMTU" ] && echo $" and maximum transfer unit: $MMTU" + return 1 + fi + # This network route is already there after ifconfig! + #if ! debug route add -net $NETWORK netmask $NETMASK dev $DEVICE; then + # echo $"Could not add network route to $NETWORK/$NETMASK on device $DEVICE" + # return 1 + #fi + return 0 +} + +function handle_mtu() { + # don't ask for MTU, but use it if it has been set in the .parm file + # don't overwrite MMTU if it has been set for CTC + [ -n "$MTU" -a -z "$MMTU" ] && MMTU="mtu $MTU" +} + +function rollback_config() { + # each transaction to roll back may fail, if previous setup has not + # made progress that far to reach a certain transation + # => error output is misleading and should be avoided + [ -n "$DEVICE" ] && tv ip -4 route flush default dev $DEVICE + [ -n "$DEVICE" ] && tv ip -6 route flush default dev $DEVICE + # address flush seems to be effective for all address families + [ -n "$DEVICE" ] && ip address flush dev $DEVICE + if [ -n "$NETTYPE" ]; then + if [ -n "$SCH_R_DEVBUSID" ]; then + local sysnettype + case "${NETTYPE}" in + qeth|lcs) sysnettype=${NETTYPE} ;; + ctcm) sysnettype=ctcm ;; + esac + [ -f /sys/devices/${sysnettype}/$SCH_R_DEVBUSID/online ] && \ + sysecho /sys/devices/${sysnettype}/$SCH_R_DEVBUSID/online "0" + udevadm settle + [ -f /sys/devices/${sysnettype}/$SCH_R_DEVBUSID/ungroup ] && \ + sysecho /sys/devices/${sysnettype}/$SCH_R_DEVBUSID/ungroup "1" + udevadm settle + fi + fi + [ -z "$mtu_was_set" ] && unset MTU + [ -z "$mmtu_was_set" ] && unset MMTU + [ -z "$vswitch_was_set" ] && unset VSWITCH + # prevent possible reuse of an old DEVICE on restarting dialog + unset DEVICE + # set activated DASDs offline again + local dasd + while read dasd < /proc/dasd/devices; do + dasd=${dasd%%(*} + sysecho /sys/bus/ccw/devices/$dasd/online 0 + done + udevadm settle +} + +### workflow helper functions + +# workflow ideas: +# - setting/applying single configuration steps right away save us explicit +# syntactical & semantic checks PLUS we get direct feedback on error +# - check error level of forked external programs and react on errors + +unset reenter +unset redoitem +unset interaction_happened + +function reenter() { + [ -z "$reenter" ] && return 1 + # reenter menu should only be shown if NOT redoing item + if [ -n "$redoitem" ]; then + # unset redoitem # wrong => do NOT do this here + return 1 + fi + return 0 +} + +function reenter_menu() { + local oldvalue=$1 + interaction_happened="yes" + # unsetting input here is not sufficient, since reenter_menu + # is not called for predefined parameters + # which then might get assigned a previous old input of another parameter! + #unset input + reenter || return 0 + # don't present reenter menu for empty parameters + # (currently ignoring parameters that are allowed to be empty!) + # this could be improved by checking if variable has been set/defined + #[ -z "$1" ] && return 0 + while : ; do + if [ -n "$helptext" ]; then + echo $"0) default is previous \"$oldvalue\", 1) new value, ?) help" + else + echo $"0) default is previous \"$oldvalue\", 1) new value" + fi + # uncoded alternative: 2) skip parameter + local answer + read answer + [ -z "$answer" ] && return 1 + case $answer in + 0) return 1 ;; + 1) # Deciding to enter new value gets user out of reenter-mode + # temporarily for this parameter. + # To put it differently: redoing does NOT present old values. + redoitem="yes" + echo -n $"new value: " + return 0 + ;; + "?") input="?" + return 1 + ;; + esac + done +} + +function workflow_item_menu() { + local noredo=$1 + # default is to continue if running kickstart to prevent interaction + [ -n "$RUNKS" ] && return 0 + interaction_happened="yes" + while : ; do + unset redoitem + if [ "$noredo" = "noredo" ]; then + echo $"1) continue, 2) restart dialog, 3) halt, 4) shell" + else + echo $"0) redo this parameter, 1) continue, 2) restart dialog, 3) halt, 4) shell" + fi + local answer + read answer + case $answer in + 0) [ "$noredo" = "noredo" ] && continue + redoitem="yes" + continue 2 + ;; + 1) return 0 ;; # can be used to break at caller on ignore + 2) reenter="yes" + rollback_config + continue 3 + ;; + 3) tv doshutdown + exit 0 + ;; + 4) echo $"Enter 'exit' at the shell prompt to get back to the installation dialog." + /bin/bash + if [ "$noredo" != "noredo" ] && [ -n "$question_prefix" ]; then + $question_prefix + echo + fi + ;; # stay in workflow item menu + esac + done +} + +# input variables: PARMNAME, question_prefix, question_choices, +# "options" ... +# output variables: $question_prefix, $helptext +# modifies: the variable named $PARMNAME, $OPTIND +function ask() { + [ $# -lt 3 ] && echo "l.$LINENO: too few arguments (<3), please fix calling code." 1>&2 + local PARMNAME=$1 + shift + question_prefix=$1 + shift + local question_choices=$1 + shift + local exception + local syntax_check + unset helptext + local handle + local finish + local optname + OPTIND=1 + while getopts ":e:s:h:c:f:" optname; do + case $optname in + e) exception=$OPTARG ;; + s) syntax_check=$OPTARG ;; + h) helptext=$OPTARG ;; + c) handle=$OPTARG ;; + f) finish=$OPTARG ;; + "?") ;; # ignore invalid option + :) echo "l.$LINENO: Missing parameter to option -$OPTARG" 1>&2 ;; + esac + done + while : ; do + unset input + local input + # actually ask question if one of the following is true: + # - $PARMNAME parameter has not been set yet, e.g. not in parm file + # - on 2nd and further attempts, i.e. redoing the parameter + # - on having restarted the whole dialog + # describing the same from another viewpoint: + # - if $PARMNAME has been set, try to check syntax and apply + # - on redo, $PARMNAME has been set and reenter is false, + # but still ask question again + # - on reenter, $PARMNAME might have been set, but still ask question + if [ -z "${!PARMNAME}" -o -n "$redoitem" -o -n "$reenter" ]; then + # one empty line to separate parameter questions from each other + echo + $question_prefix + if reenter; then + echo + else + $question_choices + fi + # on reenter, give choice between old value and entering new one + reenter_menu ${!PARMNAME} && read input \ + && [ "$input" != "?" ] && eval ${PARMNAME}=\$input + # escaping the $ in the RHS of the eval statement makes it safe + fi + if [ -n "$helptext" ] && [ "$input" = "?" ]; then + $helptext + continue + fi + # optional: default or exceptional handling + [ -n "$exception" ] && $exception + if [ -n "$syntax_check" -a -z "$handle" ]; then + # some parameters have only syntax check (and deferred config): + if $syntax_check; then + break + else + workflow_item_menu && break + fi + elif [ -n "$syntax_check" -a -n "$handle" ]; then + # most common parameters have syntax and configuration: + # user might still continue on syntax error + $syntax_check || workflow_item_menu + # optional: actual configuration + if $handle; then + # parmname has been configured successfully + break + else + # user might still continue on configuration failure + workflow_item_menu && break + fi + elif [ -n "$finish" ]; then + # few parameters need special handling done by their own function: + $finish + else + echo $"Unsupported calling of ask function, please fix calling code" + fi + done # PARMNAME + # disable potential temporary redoing-mode during reenter-mode + unset redoitem +} + +### NETTYPE + +function syntax_check_nettype() { + # - NETTYPE \in {qeth,lcs,ctc} + [[ "$NETTYPE" =~ (^qeth$)|(^lcs$)|(^ctc$) ]] + case $? in + 0) + # string matched the pattern + return 0 + ;; + 1) + # string did not match the pattern + ;; + 2) + echo "l.$LINENO: syntax error in regex of match operator =~, code needs to be fixed" 1>&2 + ;; + *) + echo "l.$LINENO: unexpected return code of regex match operator =~, code needs to be fixed" 1>&2 + ;; + esac + echo $"Incorrect format or value for network type (NETTYPE): $NETTYPE" + return 1 +} + +function question_prefix_nettype() { + echo -n $"Network type" +} + +function question_choices_nettype() { + echo $" (qeth, lcs, ctc, ? for help). Default is qeth:" +} + +function helptext_nettype() { + echo $" Help text for network type:" + echo $" qeth: OSA-Express Fast Ethernet, Gigabit Ethernet (including 1000Base-T)," + echo $" High Speed Token Ring, Hipersockets, and ATM (running Ethernet LAN emulation)" + echo $" features in QDIO mode." + echo $" [default]" + echo $" lcs: OSA-2 Ethernet/Token Ring, OSA-Express Fast Ethernet in non-QDIO mode," + echo $" OSA-Express High Speed Token Ring in non-QDIO mode and Gigabit Ethernet" + echo $" in non-QDIO mode." + echo $" ctc: Deprecated, useful for migration." +} + +function exception_nettype() { + # - default is qeth since it should be common + if [ -z "$NETTYPE" ]; then + NETTYPE=qeth + break + fi +} + +function finish_nettype() { + if syntax_check_nettype; then + break + else + # necessary parts which would otherwise be done by workflow_item_menu + interaction_happened="yes" + redoitem="yes" + fi +} + +function do_nettype() { + ask NETTYPE \ + question_prefix_nettype question_choices_nettype \ + -h helptext_nettype -e exception_nettype -f finish_nettype +} + +### CHANDEV + +function do_chandev() { + echo + echo $"The CHANDEV variable isn't used anymore, please update your " + echo $".parm or the .conf file to use NETTYPE, SUBCHANNELS, etc. instead." + echo +} + +### SUBCHANNELS + +function syntax_check_subchannels() { + SUBCHANNELS=$(echo $SUBCHANNELS | tr ABCDEF abcdef) + # - make subchannel question dependent on NETTYPE (2 vs. 3 subchannels) + if [ "$NETTYPE" = "qeth" ]; then + # - match against regex, depending on qeth + [[ "$SUBCHANNELS" =~ ^[[:xdigit:]]+\.[0-3]\.[[:xdigit:]]{4},[[:xdigit:]]+\.[0-3]\.[[:xdigit:]]{4},[[:xdigit:]]+\.[0-3]\.[[:xdigit:]]{4}$ ]] + else + # - match against regex, depending on lcs/ctc + [[ "$SUBCHANNELS" =~ ^[[:xdigit:]]+\.[0-3]\.[[:xdigit:]]{4},[[:xdigit:]]+\.[0-3]\.[[:xdigit:]]{4}$ ]] + fi + case $? in + 0) + # string matched the pattern + return 0 + ;; + 1) + # string did not match the pattern + echo $"Incorrect format for channels (SUBCHANNELS): $SUBCHANNELS" + ;; + 2) + echo "l.$LINENO: syntax error in regex of match operator =~, code needs to be fixed" 1>&2 + ;; + *) + echo "l.$LINENO: unexpected return code of regex match operator =~, code needs to be fixed" 1>&2 + ;; + esac + return 1 +} + +function semantic_check_subchannels() { + local subch_count + if [ "$NETTYPE" = "qeth" ]; then + subch_count=3 + else + subch_count=2 + fi + # done: make subchannel handling more robust by not relying on REMATCH + local -a subch_array + IFS=, + read -a subch_array <<< "indexzero,$SUBCHANNELS" + unset IFS + local i + local all_subch_good=0 + for ((i=1; i <= $subch_count; i++)); do + local devbusid=${subch_array[$i]} + # remember first subchannel for potential undo of ccwgroup + # (via /sys/devices/qeth/$SCH_R_DEVBUSID/ungroup) + [ "$i" -eq 1 ] && SCH_R_DEVBUSID=$devbusid + local prefix ssid devno foo + IFS=. + read prefix ssid devno foo <<< "$devbusid" + unset IFS + local dev_p=$(echo /sys/devices/css$prefix/$IDFORMAT/$devbusid) + # - check for existence of devnos in sysfs + if [ ! -d "$dev_p" -a "$cio_wc_bytes" != "0" ]; then + # - try to free from /proc/cio_ignore if they don't exist + echo $"Device $devbusid not present, trying to clear from blacklist and resense..." + if ! znet_cio_free -d $devbusid; then + echo $"Device $devbusid could not be cleared from device blacklist" + fi + fi + # reevaluate since globbing might not have worked before device existed + dev_p=$(echo /sys/devices/css$prefix/$IDFORMAT/$devbusid) + if [ ! -d "$dev_p" ]; then + echo $"Device $devbusid does not exist" + all_subch_good=1 + continue + fi + # devno does exist now + local subch_p=${dev_p%/*} + local subch=${subch_p##*/} + # filter definitely unusable subchannels ... + # - check for subchannel type I/O + if [ -f $subch_p/type ]; then + local type + read type < $subch_p/type + if [ "$type" != "$SUBCHANNEL_TYPE_IO" ]; then + echo $"Channel $subch (device $devbusid) is not of type I/O" + all_subch_good=1 + continue + fi + fi + # - check for correct CU type/model, depending on qeth/lcs/ctc + if [ ! -f $dev_p/cutype ]; then + echo $"Device $devbusid does not have required sysfs attribute 'cutype'" + all_subch_good=1 + continue + fi + local cutype + read cutype < $dev_p/cutype + if search_cu $cutype; then + local driver + if [ "$NETTYPE" = "ctc" ]; then + driver="ctcm" + else + driver=$NETTYPE + fi + if [ "${CU_DEVDRV[$cu_idx]}" != "$driver" ]; then + echo $"Device $devbusid has control unit type $cutype," + echo $" which does not match your selected network type $NETTYPE" + all_subch_good=1 + continue + fi + else + echo $"Device $devbusid has control unit type $cutype which is unknown" + all_subch_good=1 + continue + fi + # read CHPIDs information about subchannels + if [ ! -f $subch_p/chpids ]; then + echo $"Channel $subch (device $devbusid) does not have required sysfs attribute 'chpids'" + all_subch_good=1 + continue + fi + local chpid_list + read chpid_list < $subch_p/chpids + local -a chpids + read -a chpids <<< "$chpid_list" + if [ ${#chpids[@]} -ne 8 ]; then + echo $"sysfs reported ${#chpids[@]} CHPIDs instead of expected 8, code needs fix" + fi + if [ ! -f $subch_p/pimpampom ]; then + echo $"Channel $subch (device $devbusid) does not have required sysfs attribute 'pimpampom'" + all_subch_good=1 + continue + fi + local pim pam pom foo + read pim pam pom foo < $subch_p/pimpampom + local pimchpidZ="" + for ((chp=0; chp < 8; chp++)); do + local mask=$((0x80 >> chp)) + if (( 0x$pim & $mask )); then + pimchpidZ=${pimchpidZ}${chpids[chp]} + else + pimchpidZ=${pimchpidZ}"ZZ" + fi + done + local pimchpids=${pimchpidZ//ZZ/} + if [ "x$pimchpids" == "x" ]; then + echo $"Channel $subch (device $devbusid) does not have any installed channel path" + all_subch_good=1 + continue + fi + # compare parts of different subchannels for required matches + if [ "$i" -eq 1 ]; then + # remember parts of first subchannel for comparison + local sch_r_prefix=$prefix + local sch_r_ssid=$ssid + local sch_r_devno=$devno + local sch_r_pimchipidZ=$pimchpidZ + local sch_r_cutype=$cutype + else + local comparison=0 + # $sch_r_... might be empty if first channel was wrong + # => be sure to quote all variable accesses in test statements. + # - all subchannels must be of same CU type/model + if [ "$cutype" != "$sch_r_cutype" ]; then + echo $"Device $devbusid does not have the same control unit type as device $SCH_R_DEVBUSID" + comparison=1 + fi + # - all subchannels must have same CHPIDs + if [ "$pimchpidZ" != "$sch_r_pimchipidZ" ]; then + echo $"Device $devbusid does not have the same CHPIDs as device $SCH_R_DEVBUSID" + comparison=1 + fi + # - all subchannels should have same prefix & ssid ? + if [ "$prefix" != "$sch_r_prefix" \ + -o "$ssid" != "$sch_r_ssid" ]; then + echo $"Device $devbusid does not have the same prefix and subchannel set ID as device $SCH_R_DEVBUSID" + comparison=1 + fi + if [ "$i" -eq 2 ]; then + local sch_w_devbusid=$devbusid + local sch_w_devno=$devno + # TODO: not true for CTCM => relax + # - write_devbusid == read_devbusid+1 + if [ $((0x$devno)) -ne $((0x$sch_r_devno + 1)) ]; then + echo $"Device bus ID of write channel (dev $devbusid) must be one larger than" + echo $" that of read channel (dev $SCH_R_DEVBUSID)" + comparison=1 + fi + elif [ "$i" -eq 3 ]; then + # check data subchannel unequal to read/write subchannel + # (also seems to be handled by ccwgroup kernel subsystem) + if [ "$devbusid" = "$sch_w_devbusid" \ + -o "$devbusid" = "$SCH_R_DEVBUSID" ]; then + echo $"Device bus ID of data channel (dev $devbusid) must be different to that of" + echo $" read channel ($SCH_R_DEVBUSID) and write channel ($sch_w_devbusid)" + comparison=1 + fi + fi + if [ "$comparison" != 0 ]; then + all_subch_good=1 + continue + fi + fi + # filter potentially good subchannels ... + if [ -h $dev_p/group_device ]; then + echo $"Device $devbusid is already in a ccwgroup and thus unavailable" + all_subch_good=1 + continue + fi + if [ ! -f $dev_p/online ]; then + echo $"Device $devbusid does not have required sysfs attribute 'online'" + all_subch_good=1 + continue + fi + local online + read online < $dev_p/online + if [ "$online" = "1" ]; then + echo $"Device $devbusid is already in use and thus unavailable" + all_subch_good=1 + continue + fi + # - check availability + if [ ! -f $dev_p/availability ]; then + echo $"Device $devbusid does not have required sysfs attribute 'availability'" + all_subch_good=1 + continue + fi + local availability + read availability < $dev_p/availability + if [ "$availability" != "good" ]; then + echo $"Device $devbusid is not available but '$availiability'" + all_subch_good=1 + continue + fi + + done # for ((i=1; i <= $subch_count; i++)) + if [ "$all_subch_good" = "0" ]; then + return 0 + fi + return 1 +} + +function handle_subchannels() { + # - try to establish ccwgroup right here and fail out on error + local driver + if [ "$NETTYPE" = "ctc" ]; then + driver="ctcm" + else + driver=$NETTYPE + fi + # if necessary, + # rebind hybrid devices (3088/08 and 3088/1f) to user specified driver + local curdrv + curdrv=$(readlink /sys/bus/ccw/devices/$SCH_R_DEVBUSID/driver) + curdrv=${curdrv##*/} + if [ "$curdrv" = "lcs" -a "$NETTYPE" = "ctc" ]; then + sysecho /sys/bus/ccw/drivers/lcs/unbind "$SCH_R_DEVBUSID" + sysecho /sys/bus/ccw/drivers/ctcm/bind "$SCH_R_DEVBUSID" + fi + if [ "$curdrv" = "ctcm" -a "$NETTYPE" = "lcs" ]; then + sysecho /sys/bus/ccw/drivers/ctcm/unbind "$SCH_R_DEVBUSID" + sysecho /sys/bus/ccw/drivers/lcs/bind "$SCH_R_DEVBUSID" + fi + local channel2 + channel2=${SUBCHANNELS##*,} + curdrv=$(readlink /sys/bus/ccw/devices/$channel2/driver) + curdrv=${curdrv##*/} + if [ "$curdrv" = "lcs" -a "$NETTYPE" = "ctc" ]; then + sysecho /sys/bus/ccw/drivers/lcs/unbind "$channel2" + sysecho /sys/bus/ccw/drivers/ctcm/bind "$channel2" + fi + if [ "$curdrv" = "ctcm" -a "$NETTYPE" = "lcs" ]; then + sysecho /sys/bus/ccw/drivers/ctcm/unbind "$channel2" + sysecho /sys/bus/ccw/drivers/lcs/bind "$channel2" + fi + # create ccwgroup + if sysecho /sys/bus/ccwgroup/drivers/${driver}/group "$SUBCHANNELS"; then + udevadm settle + case "$NETTYPE" in + qeth) + # Just preliminary card_type info until device goes online! + # In fact it seems enough to separate OSA from HiperSockets. + if [ -f /sys/devices/qeth/$SCH_R_DEVBUSID/card_type ]; then + read cardtype < /sys/devices/qeth/$SCH_R_DEVBUSID/card_type + else + echo $"Could not read qeth network card type from sysfs." + fi + ;; + ctc|lcs) + if [ -f /sys/devices/$driver/$SCH_R_DEVBUSID/type ]; then + local type + read type < /sys/devices/$driver/$SCH_R_DEVBUSID/type + [ "$type" = "CTC/A" ] && \ + type="channel-to-channel adapter (CTC/A)" + echo $"Detected: $type" + else + echo $"Could not read ctc network card type from sysfs." + fi + ;; + esac + return 0 + else + echo $"Channels $SUBCHANNELS could not be grouped" + fi + return 1 +} + +function question_prefix_subchannels() { + if [ "$NETTYPE" = "qeth" ]; then + echo -n $"Read,write,data channel" + else + echo -n $"Read,write channel" + fi +} + +function question_choices_subchannels() { + if [ "$NETTYPE" = "qeth" ]; then + echo $" (e.g. 0.0.0300,0.0.0301,0.0.0302 or ? for help)." + else + echo $" (e.g. 0.0.0600,0.0.0601 or ? for help)" + fi +} + +function helptext_subchannels() { + if [ "$NETTYPE" = "qeth" ]; then + echo $" Help text for qeth channels:" + echo $" Enter the device bus ID of your CCW devices." + echo $" QETH needs three channels for read, write, and data," + echo $" e.g. 0.0.0300,0.0.0301,0.0.0302" + else + echo $" Help text for lcs/ctc channels:" + echo $" Enter the device bus ID of your CCW devices." + echo $" CTC/ESCON and LCS need two channels for read and write," + echo $" e.g. 0.0.0600,0.0.0601 will configure the CTC or ESCON interface" + echo $" with the channels 0x600 and 0x601" + fi +} + +function finish_subchannels() { + syntax_check_subchannels || workflow_item_menu + # continuing on syntax error is doomed to fail, + # since handle_subchannels relies on the regex-based strict parsing + # in syntax_check_subchannels which does not match anything then + # news: relaxed by splitting semantic check and actual handling + semantic_check_subchannels || workflow_item_menu + if handle_subchannels; then + break + else + workflow_item_menu && break + fi +} + +function do_subchannels() { + ask SUBCHANNELS \ + question_prefix_subchannels question_choices_subchannels \ + -h helptext_subchannels -f finish_subchannels +} + +### PORTNAME (qeth) + +function syntax_check_portname() { + # - 1-8 characters, we convert it to upper case + PORTNAME=$(echo $PORTNAME | tr '[:lower:]' '[:upper:]') + local portname_len=${#PORTNAME} + if [ "$portname_len" -ge 1 -a "$portname_len" -le 8 ]; then + return 0 + fi + echo $"Incorrect string length [1..8] for portname (PORTNAME): $PORTNAME" + return 1 +} + +function handle_portname() { + [ -n "$PORTNAME" ] || return 0 + # - try to set portname right here w/ error handling + if sysecho /sys/devices/${NETTYPE}/$SCH_R_DEVBUSID/portname "$PORTNAME"; then + return 0 + else + echo $"Portname '$PORTNAME' could not be configured for $SUBCHANNELS" + fi + return 1 +} + +function hint_portname() { + if [ -f /sys/devices/${NETTYPE}/$SCH_R_DEVBUSID/portname ]; then + local pname_hint + read pname_hint < /sys/devices/${NETTYPE}/$SCH_R_DEVBUSID/portname + if [ "$pname_hint" = "no portname required" ]; then + echo $" * Your configuration does not require a portname. *" + fi + fi +} + +function question_prefix_portname(){ + echo -n $"Portname" +} + +function question_choices_portname(){ + echo $" (1..8 characters, or ? for help). Default is no portname:" +} + +function helptext_portname(){ + echo $" Help text for portname:" + # updated text describing when portname is obsolete; + # taken from: + # SA22-7935-09, Open Systems Adapter-Express Customer's + # Guide and Reference, 10th ed. May 2008, IBM, p.17f. + # SC33-8411-00, Device Drivers, Features, and Commands, + # 1st ed. May 2008, IBM, p.116. + echo $" Portname of the OSA-Express feature in QDIO mode and z/VM Guest LAN." + echo $" This parameter is optional with:" + echo $" - z/VM 4.4.0 or z/VM 4.3.0 with APARs VM63308 and PQ73878" + echo $" - z800, z900 with >= Driver 3G - EC stream J11204, MCL032 (OSA level 3.33)" + echo $" - z890, z990, z9, z10 mainframes" + hint_portname + echo $" If portname is used, all operating systems sharing port must use same name." + echo $" Input empty string if you don't want to enter a portname. [default]" +} + +function exception_portname(){ + [ -z "$PORTNAME" ] && break +} + +function do_portname() { + ask PORTNAME \ + question_prefix_portname question_choices_portname \ + -h helptext_portname \ + -e exception_portname -s syntax_check_portname -c handle_portname +} + +### PORTNO (qeth) + +function syntax_check_qeth_portno() { + case $PORTNO in + 0|1) + return 0 + ;; + esac + echo $"Incorrect format or value for relative port number (PORTNO): $PORTNO" + return 1 +} + +function handle_qeth_portno() { + if sysecho /sys/devices/qeth/$SCH_R_DEVBUSID/portno "$PORTNO"; then + return 0 + fi + echo $"Could not configure relative port number $PORTNO for $SUBCHANNELS" + return 1 +} + +function question_prefix_portno() { + echo -n $"Relative port number for OSA" +} + +function question_choices_portno() { + echo $" (0, 1, or ? for help). Default is 0:" +} + +function helptext_portno() { + echo $" Help text for relative port number for OSA with 2 ports per CHPID:" + echo $" This applies to:" + echo $" - OSA-Express3 Gigabit Ethernet on z10 systems" + echo $" - OSA-Express ATM on zSeries 800 and 900 systems" + echo $" 0 for relative port number 0 [default]" + echo $" 1 for relative port number 1" + echo $" Input empty string to not modify the default configuration." +} + +function exception_portno() { + # Writing portno of e.g. hipersockets device fails. + # Therefore, do not configure on empty default value. + [ -z "$PORTNO" ] && break +} + +function do_portno() { + ask PORTNO \ + question_prefix_portno question_choices_portno \ + -h helptext_portno -e exception_portno \ + -s syntax_check_qeth_portno -c handle_qeth_portno +} + +### LAYER2 + +function syntax_check_layer2() { + # - $LAYER2 \in {0,1} + case $LAYER2 in + 0|1) + return 0 + ;; + esac + echo $"Incorrect format or value for layer2 mode (LAYER2): $LAYER2" + return 1 +} + +function handle_layer2() { + [ "$NETTYPE" == "qeth" ] || return 0 + [ -n "$LAYER2" ] || return 0 + # - try to set layer2 mode right here w/ error handling + if sysecho /sys/devices/${NETTYPE}/$SCH_R_DEVBUSID/layer2 "$LAYER2"; then + return 0 + else + echo $"Layer2 mode '$LAYER2' could not be configured for $SUBCHANNELS" + fi + return 1 +} + +function question_prefix_layer2() { + echo -n $"Layer mode" +} + +function question_choices_layer2() { + echo -n $" (0 for layer3, 1 for layer2, or ? for help)." + if [ "$isLayer2Default" = "yes" ]; then + echo $" Default is 1:" + else + echo $" Default is 0:" + fi +} + +function helptext_layer2() { + echo $" Help text for OSA mode of operation: layer 2 vs. layer 3" + if [ "$isLayer2Default" = "yes" ]; then + echo $" 0 for layer 3 mode (may not work with dhcp, tcpdump, etc.)" + echo $" 1 for layer 2 mode [default]" + else + echo $" 0 for layer 3 mode [default] (may not work with dhcp, tcpdump, etc.)" + echo $" 1 for layer 2 mode" + fi +} + +function exception_layer2() { + if [ -z "$LAYER2" ]; then + isLayer2Default && LAYER2=1 || LAYER2=0 + # do not break, always apply, default may differ from online layer mode + #break + fi +} + +function do_layer2() { + isLayer2Default && isLayer2Default=yes || isLayer2Default=no + ask LAYER2 \ + question_prefix_layer2 question_choices_layer2 \ + -h helptext_layer2 -e exception_layer2 \ + -s syntax_check_layer2 -c handle_layer2 +} + +### MACADDR + +function syntax_check_macaddr() { + # - match against regex + [[ "$MACADDR" =~ ^[[:xdigit:]][[:xdigit:]]:[[:xdigit:]][[:xdigit:]]:[[:xdigit:]][[:xdigit:]]:[[:xdigit:]][[:xdigit:]]:[[:xdigit:]][[:xdigit:]]:[[:xdigit:]][[:xdigit:]]$ ]] + case $? in + 0) + # string matched the pattern + return 0 + ;; + 1) + # string did not match the pattern + echo $"Incorrect format for mac address (MACADDR): $MACADDR" + ;; + 2) + echo "l.$LINENO: syntax error in regex of match operator =~, code needs to be fixed" 1>&2 + ;; + *) + echo "l.$LINENO: unexpected return code of regex match operator =~, code needs to be fixed" 1>&2 + ;; + esac + return 1 +} + +function handle_macaddr() { + # - try to set macaddr right here w/ error handlg. + # device needs to be online + if debug ifconfig $DEVICE hw ether $MACADDR; then + return 0 + fi + echo $"MAC address $MACADDR could not be configured for" + echo $" $SUBCHANNELS (network device $DEVICE)" + return 1 +} + +function question_prefix_macaddr() { + echo -n $"Unique MAC address" +} + +function question_choices_macaddr() { + macaddr_default=$(ifconfig $DEVICE | grep 'HWaddr' | sed 's/.*HWaddr \([[:xdigit:]][[:xdigit:]]:[[:xdigit:]][[:xdigit:]]:[[:xdigit:]][[:xdigit:]]:[[:xdigit:]][[:xdigit:]]:[[:xdigit:]][[:xdigit:]]:[[:xdigit:]][[:xdigit:]]\).*/\1/') + echo $" (e.g. 02:00:00:00:00:00, ? for help). Default is $macaddr_default:" +} + +function helptext_macaddr() { + echo $" Help text for MAC address:" + if [ -z "${cardtype//OSD_*/}" ]; then + echo $" For real OSA in layer 2 mode, a random MAC address is automatically assigned." + else + echo $" If connecting to a layer 2 VSWITCH, a MAC address is automatically assigned." + fi + echo $" You may accept the automatic MAC address with an empty input. [default]" + echo $" If the automatic address is not unique, please provide a MAC address." + [ -z "${cardtype//OSD_*/}" ] && \ + echo $" For real OSA, the provided address must be different from that of the OSA." + echo $" You may override the automatic MAC address with non-empty input." + echo $" An example MAC address would be: 02:00:00:00:00:00" +} + +function exception_macaddr() { + if [ -z "$MACADDR" ]; then + if [ -z "${cardtype//OSD_*/}" ]; then + # keep random default MAC address of real OSA, + # so the OSA comes up with the same MAC each time in the future + MACADDR=$macaddr_default + else + # virtual OSA in layer2 is GuestLAN or VSWITCH + VSWITCH=1 + fi + break + fi +} + +function do_macaddr() { + ask MACADDR \ + question_prefix_macaddr question_choices_macaddr \ + -h helptext_macaddr -e exception_macaddr \ + -s syntax_check_macaddr -c handle_macaddr +} + +### CTCPROT + +function syntax_check_ctcprot() { + case "x$CTCPROT" in + x|x0) + unset CTCPROT + return 0 + ;; + x1|x3) + return 0 + ;; + x2) + echo $"CTC tty's are not usable for this installation (CTCPROT)" + ;; + *) + echo $"Incorrect format or value for CTC protocol (CTCPROT): $CTCPROT" + ;; + esac + return 1 +} + +function handle_ctcprot() { + [ -n "$CTCPROT" ] || return 0 + if sysecho /sys/devices/ctcm/${SCH_R_DEVBUSID}/protocol "$CTCPROT"; then + return 0 + fi + echo $"Could not configure CTC protocol $CTCPROT for $SUBCHANNELS" + return 1 +} + +function question_prefix_ctcprot() { + echo -n $"CTC protocol" +} + +function question_choices_ctcprot() { + echo $" (0, 1, 3, or ? for help). Default is 0:" +} + +function helptext_ctcprot() { + echo $" Help text for CTC protocol:" + echo $" Protocol which should be used for the CTC interface" + echo $" 0 for compatibility with p.e. VM TCP service machine [default]" + echo $" 1 for enhanced package checking for Linux peers" + echo $" 3 for compatibility with OS/390 or z/OS peers" +} + +function do_ctcprot() { + ask CTCPROT \ + question_prefix_ctcprot question_choices_ctcprot \ + -h helptext_ctcprot -s syntax_check_ctcprot -c handle_ctcprot +} + +### PORTNAME (LCS portno) + +function syntax_check_lcs_portno() { + [[ "$PORTNAME" =~ ^[[:digit:]]+$ ]] + case $? in + 0) + # string matched the pattern + return 0 + ;; + 1) + # string did not match the pattern + ;; + 2) + echo "l.$LINENO: syntax error in regex of match operator =~, code needs to be fixed" 1>&2 + ;; + *) + echo "l.$LINENO: unexpected return code of regex match operator =~, code needs to be fixed" 1>&2 + ;; + esac + echo $"Incorrect format for LCS port number (PORTNAME): $PORTNAME" + return 1 +} + +function handle_lcs_portno() { + [ -n "$PORTNAME" ] || return 0 + if sysecho /sys/devices/lcs/$SCH_R_DEVBUSID/portno "$PORTNAME"; then + return 0 + fi + echo $"Could not configure relative port number $PORTNAME for $SUBCHANNELS" + return 1 +} + +function question_prefix_lcs_portno() { + echo -n $"Relative port number of your LCS device" +} + +function question_choices_lcs_portno() { + echo $" (number or ? for help). Default is 0:" +} + +function helptext_lcs_portno() { + echo $" Help text for relative port number of LCS device:" + echo $" Required for OSA-Express ATM cards only." +} + +function exception_lcs_portno() { + [ -z "$PORTNAME" ] && break +} + +function do_lcs_portno() { + # LCS portno and QETH portname share the parameter variable PORTNAME. + # For compatibility with existing parm files we keep this scheme. + ask PORTNAME \ + question_prefix_lcs_portno question_choices_lcs_portno \ + -e exception_lcs_portno \ + -h helptext_lcs_portno -s syntax_check_lcs_portno -c handle_lcs_portno +} + +### HOSTNAME + +function syntax_check_hostname() { + syntax_check_domainname "$HOSTNAME" "Incorrect format for hostname (HOSTNAME): $HOSTNAME" +} + +function handle_hostname() { + if ! hostname $HOSTNAME; then + echo $"Could not configure hostname $HOSTNAME" + return 1 + fi + return 0 +} + +function question_prefix_hostname() { + echo -n $"Hostname of your new Linux guest" +} + +function question_choices_hostname() { + echo $" (FQDN e.g. s390.redhat.com or ? for help):" +} + +function helptext_hostname() { + echo $" Help text for hostname:" + echo $" Enter the full qualified domain name of your host." +} + +function do_hostname() { + ask HOSTNAME \ + question_prefix_hostname question_choices_hostname \ + -h helptext_hostname -s syntax_check_hostname -c handle_hostname +} + +### IPADDR + +function syntax_check_ipaddr() { + unset ipv4 + unset ipv6 + if checkipv4 $IPADDR; then + ipv4="yes" + return 0 + elif [ "$ipv6_capable" = "yes" ] && checkipv6 $IPADDR; then + ipv6="yes" + return 0 + fi + echo $"Incorrect format for IP address (IPADDR): $IPADDR" + return 1 +} + +function question_prefix_ipaddr() { + echo -n $"IPv4 address" + [ "$ipv6_capable" = "yes" ] && echo -n $" / IPv6 addr." +} + +function question_choices_ipaddr() { + echo -n $" (e.g. 10.0.0.2" + [ "$ipv6_capable" = "yes" ] && echo -n $" / 2001:0DB8::" + echo $" or ? for help)" +} + +function helptext_ipaddr() { + echo $" Help text for IP address:" + echo $" Enter a valid IPv4 address of your new Linux guest (e.g. 10.0.0.2)" + if [ "$ipv6_capable" = "yes" ]; then + echo $" or alternatively a valid IPv6 address without CIDR prefix (e.g. 2001:0DB8::)" + echo $" IPv6 is supported on:" + echo $" - Ethernet interfaces of the OSA-Express adapter running in QDIO mode." + echo $" - HiperSockets interfaces" + echo $" - z/VM guest LAN interfaces running in QDIO mode." + echo $" IPv6 is not supported on HiperSockets guest LAN, OSA-Express Token Ring, ATM." + fi +} + +function do_ipaddr() { + ipv6_capable && ipv6_capable=yes || ipv6_capable=no + ask IPADDR \ + question_prefix_ipaddr question_choices_ipaddr \ + -h helptext_ipaddr -s syntax_check_ipaddr + if [ "$ipv6" ]; then + # qeth_l3 would load ipv6 automatically but not qeth_l2 + modprobe ipv6 + tv disable_ipv6_autoconf + fi + + # no handling/configuring of IPADDR yet, since more parameters needed +} + +### NETMASK (IPv4) + +function syntax_check_netmask_v4() { + # also support CIDR prefix + if [[ "$NETMASK" =~ ^[[:digit:]]+$ ]]; then + if [ "$NETMASK" -ge 1 -a "$NETMASK" -le 32 ]; then + ipcalc_arg="$IPADDR/$NETMASK" + return 0 + fi + echo $"Incorrect value for network prefix [1..32] (NETMASK): $NETMASK" + return 1 + elif checkipv4 $NETMASK; then + ipcalc_arg="$IPADDR $NETMASK" + return 0 + fi + echo $"Incorrect format or value for network mask (NETMASK): $NETMASK" + return 1 +} + +function question_prefix_netmask() { + echo -n $"IPv4 netmask or CIDR prefix" +} + +function hint_netmask_v4() { + # default based on class a/b/c address + local a b c d + IFS=. + read a b c d <<< "$IPADDR" + unset IFS + local ip=$(( ( a << 24 ) + ( b << 16 ) + ( c << 8 ) + ( d ) )) + # <<EOF convince syntax highlighter that above shifts are no here documents + if [ $(( ip & 0x80000000 )) -eq $(( 0x00000000 )) ]; then + # class a + echo "255.0.0.0" + elif [ $(( ip & 0xC0000000 )) -eq $(( 0x80000000 )) ]; then + # class b + echo "255.255.0.0" + elif [ $(( ip & 0xE0000000 )) -eq $(( 0xC0000000 )) ]; then + # class c + echo "255.255.255.0" + else + # some other class that should not be used as host address + return 1 + fi + return 0 +} + +function question_choices_netmask() { + echo -n $" (e.g. 255.255.255.0 or 1..32 or ? for help)" + local default=$(hint_netmask_v4) + if [ -n "$default" ]; then + echo $". Default is $default:" + else + echo $":" + echo $"The IP address you entered previously should probably not be used for a host." + fi +} + +function helptext_netmask() { + echo $" Help text for IPv4 netmask or CIDR prefix:" + echo $" Enter a valid IPv4 netmask or CIDR prefix (e.g. 255.255.255.0 or 1..32)" + local default=$(hint_netmask_v4) + if [ -n "$default" ]; then + echo $" Default is $default" + else + echo $"The IP address you entered previously should probably not be used for a host." + fi +} + +function exception_netmask() { + if [ -z "$NETMASK" ]; then + NETMASK=$(hint_netmask_v4) + fi +} + +function do_netmask() { + ask NETMASK \ + question_prefix_netmask question_choices_netmask \ + -h helptext_netmask \ + -s syntax_check_netmask_v4 -e exception_netmask + # no handling/configuring of NETMASK yet, since more parameters needed +} + +### NETWORK + +function do_network() { + echo + echo $"The NETWORK parameter isn't used anymore and will be ignored." + echo $" It is sufficient to specify IPADDR and NETMASK." + echo + unset NETWORK +} + +### BROADCAST + +function do_broadcast() { + echo + echo $"The BROADCAST parameter isn't used anymore and will be ignored." + echo $" It is sufficient to specify IPADDR and NETMASK." + echo + unset BROADCAST +} + +### NETMASK (IPv6) + +function syntax_check_prefix_v6() { + if [[ "$NETMASK" =~ ^[[:digit:]]+$ ]]; then + if [ "$NETMASK" -ge 1 -a "$NETMASK" -le 128 ]; then + return 0 + fi + fi + echo $"Incorrect value for network prefix [1..128] (NETMASK): $NETMASK" + return 1 +} + +function question_prefix_netmask_v6() { + echo -n $"CIDR prefix for the IPv6 address" +} + +function question_choices_netmask_v6() { + echo $" (1..128):" +} + +function do_netmask_v6() { + ask NETMASK \ + question_prefix_netmask_v6 question_choices_netmask_v6 \ + -s syntax_check_prefix_v6 + # no handling/configuring of NETMASK yet, since more parameters needed +} + +### GATEWAY (IPv4) + +function configure_ipv4_gateway() { + # FIXME: + # - Strictly speaking we should first check reachability of gateway + # and then configure the gateway route. + # This would require a new intermediate workflow_item step + # so that the user might continue despite unreachable gateway. + # done: Only adding default route might add multiple undesired default + # routes on redoing the parameter item, so delete default route + # before adding a new one. + ip -4 route del default dev $DEVICE >& /dev/null + [ -z "$GATEWAY" ] && return 0 + if ! tv route add default gw $GATEWAY dev $DEVICE; then + echo $"Could net set default route on device $DEVICE via gateway $GATEWAY" + return 1 + fi + # BH FIXME: Workaround for manual MACADDR, need ping to update arp table + echo $"Trying to reach gateway $GATEWAY..." + if [ "$NETTYPE" = "ctc" ]; then + # (virtual) CTC(/A) seems to need some time to get functional + local i=1 + while : ; do + $PING $GATEWAY >& /dev/null && break + i=$((i+1)) + if [ "$i" -gt 3 ]; then + echo $"Could not reach gateway $GATEWAY within timeout" + return 1 + fi + done + else + if ! $PING $GATEWAY >& /dev/null; then + echo $"Could not reach your default gateway $GATEWAY" + return 1 + fi + fi + return 0 +} + +function hint_ipv4_gateway() { + # - provide default suggestion based on network, + # for a class C network this would be either .1 or .254 at the end + local a b c d + IFS=. + read a b c d <<< "$NETWORK" + unset IFS + local ip=$(( ( a << 24 ) + ( b << 16 ) + ( c << 8 ) + ( d ) )) + # <<EOF convince syntax highlighter that above shifts are no here documents + local lo=$(( ip | 1 )) + local lo_a=$(( (lo & 0xFF000000) >> 24 )) + local lo_b=$(( (lo & 0x00FF0000) >> 16 )) + local lo_c=$(( (lo & 0x0000FF00) >> 8 )) + local lo_d=$(( (lo & 0x000000FF) )) + local hi=$(( ip | ( (2**(32 - PREFIX)) - 1 ) )) + local hi_a=$(( (hi & 0xFF000000) >> 24 )) + local hi_b=$(( (hi & 0x00FF0000) >> 16 )) + local hi_c=$(( (hi & 0x0000FF00) >> 8 )) + local hi_d=$(( (hi & 0x000000FE) )) + echo $" Depending on your network design patterns, the default gateway" + echo $" might be $lo_a.$lo_b.$lo_c.$lo_d or $hi_a.$hi_b.$hi_c.$hi_d" +} + +function question_prefix_gateway() { + echo -n $"IPv4 address of your default gateway" +} + +function question_choices_gateway() { + echo $" or ? for help:" +} + +function helptext_gateway() { + echo $" Help text for IPv4 default gateway:" + echo $" For HiperSockets with internal traffic only you may want to leave this empty" + echo $" and choose continue afterwards to go on without gateway." + hint_ipv4_gateway +} + +function finish_gateway() { + if ! checkipv4 $GATEWAY; then + # above checkipv4 is silent, so make up for syntax error + echo $"Incorrect format for IPv4 address of gateway (GATEWAY): $GATEWAY" + workflow_item_menu + fi + if configure_ipv4_gateway; then + break + else + workflow_item_menu && break + fi +} + +# FIXME: allow empty/no gateway? + +function do_gateway() { + ask GATEWAY \ + question_prefix_gateway question_choices_gateway \ + -h helptext_gateway -f finish_gateway +} + +### GATEWAY (IPv6) + +function configure_ipv6_gateway() { + # FIXME: + # - Strictly speaking we should first check reachability of gateway + # and then configure the gateway route. + # This would require a new intermediate workflow_item step + # so that the user might continue despite unreachable gateway. + # done: Only adding default route might add multiple undesired default + # routes on redoing the parameter item, so delete default route + # before adding a new one. + ip -6 route del default dev $DEVICE >& /dev/null + [ -z "$GATEWAY" ] && return 0 + # IPv6 http://www.ibiblio.org/pub/Linux/docs/HOWTO/other-formats/html_single/Linux+IPv6-HOWTO.html#AEN1147 + # ip -6 route add ::/0 dev $DEVICE via $GATEWAY + # (Could also be learned by autoconfiguration on the link: + # after IP address setup and device up, + # see if default route has been learned + # ip -6 route show | grep ^default + # However, we currently use manual IPv6 configuration only.) + if ! debug ip -6 route add ::/0 dev $DEVICE via $GATEWAY; then + echo $"Could net set default route on device $DEVICE" + echo $" via gateway $GATEWAY" + return 1 + fi + # BH FIXME: Workaround for manual MACADDR, need ping to update arp table + echo $"Trying to reach gateway $GATEWAY..." + if ! $PING6 $GATEWAY >& /dev/null; then + echo $"Could not reach your default gateway $GATEWAY" + return 1 + fi + return 0 +} + +function question_prefix_gateway_v6() { + echo -n $"IPv6 address of your default gateway" +} + +function question_choices_gateway_v6() { + echo $":" +} + +function helptext_gateway_v6() { + echo $" Help text for IPv6 default gateway:" + echo $" For HiperSockets with internal traffic only you may want to leave this empty" + echo $" and choose continue afterwards to go on without gateway." +} + +function finish_gateway_v6() { + if ! checkipv6 $GATEWAY; then + # above checkipv6 is silent, so make up for syntax error + echo $"Incorrect format for IPv6 address of gateway (GATEWAY): $GATEWAY" + workflow_item_menu + fi + if configure_ipv6_gateway; then + break + else + workflow_item_menu && break + fi +} + +# FIXME: allow empty/no gateway? + +function do_gateway_v6() { + ask GATEWAY \ + question_prefix_gateway_v6 question_choices_gateway_v6 \ + -h helptext_gateway_v6 -f finish_gateway_v6 +} + +### GATEWAY (IPv4, point-to-point) + +function configure_ipv4_ptp() { + # device needs to be online + if debug ifconfig $DEVICE $IPADDR $MMTU pointopoint $GATEWAY; then + configure_ipv4_gateway + return $? + fi + echo $"Could not set IPv4 address $IPADDR for device $DEVICE" + echo $" to peer $GATEWAY" + [ -n "$MMTU" ] && echo $" and maximum transfer unit: $MMTU" + return 1 +} + +function question_prefix_ptp_gateway() { + echo -n $"IPv4 address of your point-to-point partner" +} + +function question_choices_ptp_gateway() { + echo $" or ? for help:" + # no hinting possible here +} + +function helptext_ptp_gateway() { + echo $" Help text for point-to-point partner:" + echo $" IPv4 address of your CTC or ESCON point-to-point partner." +} + +function finish_ptp_gateway() { + if checkipv4 $GATEWAY; then + if [ "$GATEWAY" = "$IPADDR" ]; then + echo $"IPv4 address of partner should probably be different from the guest's address" + workflow_item_menu && break + else + break + fi + else + # above checkipv4 is silent, so make up for syntax error + echo $"Incorrect format for IPv4 address of partner (GATEWAY): $GATEWAY" + workflow_item_menu && break + fi + # too early to actually configure gateway +} + +function do_ptp_gateway() { + ask GATEWAY \ + question_prefix_ptp_gateway question_choices_ptp_gateway \ + -h helptext_ptp_gateway -f finish_ptp_gateway +} + +### DNS + +function syntax_check_dns() { + if [ -z "$DNS" ]; then + echo $"You might encounter problems without a nameserver, especially with FTP installs" + return 1 + fi + local dnsitem + local allgood="yes" + if [ "$ipv6" ]; then + while read dnsitem; do + if ! checkipv6 $dnsitem; then + echo $"Not a valid IPv6 address for DNS server: $dnsitem" + allgood="no" + fi + done < <(echo $DNS | sed 's/,/\n/g') + else + while read dnsitem; do + if ! checkipv4 $dnsitem; then + echo $"Not a valid IPv4 address for DNS server: $dnsitem" + allgood="no" + fi + done < <(echo $DNS | sed 's/:/\n/g') + fi + if [ "$allgood" = "yes" ]; then + return 0 + else + return 1 + fi +} + +function handle_dns() { + # - foreach DNS try if server is reachable by one ping + [ -z "$DNS" ] && return 0 + local dnsitem + local allgood="yes" + echo $"Trying to reach DNS servers..." + if [ "$ipv6" ]; then + while read dnsitem; do + if ! $PING6 $dnsitem >& /dev/null; then + echo $"Could not ping DNS server (might still serve DNS requests): $dnsitem" + allgood="no" + # this should not be a hard failure since some network + # environments may prevent pings to DNS servers + # => prevent workflow_item_menu in kickstart mode + fi + done < <(echo $DNS | sed 's/,/\n/g') + else + while read dnsitem; do + # Some network environment may prevent a DNS server from being + # reachable by ping, so it would make sense to use nslookup. + # However, nslookup fails with "Resolver Error 0 (no error)" + # at this stage of the setup progress => not useful + if ! $PING $dnsitem >& /dev/null; then + echo $"Could not ping DNS server: $dnsitem" +# if nslookup $dnsitem $dnsitem >& /dev/null; then +# echo $" but could resolve DNS server with itself: $dnsitem" +# else +# echo $"Could not resolve DNS server with itself: $dnsitem" +# allgood="no" +# fi +# elif ! nslookup $dnsitem $dnsitem >& /dev/null; then +# echo $"Could not resolve DNS server with itself: $dnsitem" + allgood="no" + fi + done < <(echo $DNS | sed 's/:/\n/g') + fi + if [ "$allgood" = "yes" ]; then + return 0 + else + return 1 + fi +} + +function question_prefix_dns() { + if [ "$ipv6" ]; then + echo -n $"IPv6 addresses of DNS servers" + else + echo -n $"IPv4 addresses of DNS servers" + fi +} + +function question_choices_dns() { + if [ "$ipv6" ]; then + echo $" (separated by commas ',' or ? for help):" + else + echo $" (separated by colons ':' or ? for help):" + fi +} + +function helptext_dns() { + echo $" Help text for DNS servers:" + if [ "$ipv6" ]; then + echo $" Enter IPv6 addresses of DNS servers separated by commas ','" + else + echo $" Enter IPv4 addresses of DNS servers separated by colons ':'" + fi + echo $" Default are no DNS servers at all." + echo $" However, you might encounter problems without a nameserver," + echo $" especially with FTP installs." + if [ "$ipv6" ]; then + echo $" An example with 2 servers would be: 2001:0DB8::42,2001:0DB8::BE:AF" + else + echo $" An example with 2 servers would be: 10.0.0.250:10.1.1.1" + fi +} + +function do_dns() { + ask DNS \ + question_prefix_dns question_choices_dns \ + -h helptext_dns -s syntax_check_dns -c handle_dns +} + +### SEARCHDNS + +function syntax_check_searchdns() { + [ -z "$SEARCHDNS" ] && return 0 + local dnsitem + local allgood="yes" + while read dnsitem; do + syntax_check_domainname "$dnsitem" $"Not a valid DNS search domain: $dnsitem" || allgood="no" + done < <(echo $SEARCHDNS | sed 's/:/\n/g') + if [ "$allgood" = "yes" ]; then + return 0 + else + return 1 + fi +} + +function question_prefix_searchdns() { + echo -n $"DNS search domains" +} + +function question_choices_searchdns() { + echo $" (separated by colons ':' or ? for help):" +} + +function helptext_searchdns() { + echo $" Help text for DNS search domains:" + echo $" Enter search domains according to hostname syntax separated by colons." + echo $" Default are no DNS search domains at all." + echo $" An example would be: subdomain.domain.com:domain.com" +} + +function do_searchdns() { + ask SEARCHDNS \ + question_prefix_searchdns question_choices_searchdns \ + -h helptext_searchdns -s syntax_check_searchdns +} + +### DASD + +function parse_dasd() { + local handle + [ "$1" = "-h" ] && handle=yes || unset handle + local dasditem + local allgood="yes" + local cio_wc=$(wc -c /proc/cio_ignore) + read cio_wc_bytes cio_wc_filename cio_wc_foo <<< "$cio_wc" + if [ "$handle" = "yes" -a "$cio_wc_bytes" != "0" ]; then + echo $"Trying to clear specified DASDs from device blacklist..." + mkdir -p /etc/modprobe.d + echo "options dasd_mod dasd=$DASD" > /etc/modprobe.d/dasd_mod.conf + if ! dasd_cio_free; then + echo $"Not all specified DASDs could be detected within timeout." + allgood="no" + fi + fi + while read dasditem; do + unset range features range lo hi rangegood \ + attrs devno lodevno hidevno devbusid sys + case $dasditem in + autodetect) + [ -z "$handle" ] && continue + cio_wc=$(wc -c /proc/cio_ignore) + read cio_wc_bytes cio_wc_filename cio_wc_foo <<< "$cio_wc" + # above we only freed the devices specified in $DASD, + # so there might still be other DASDs in the blacklist + if [ "$cio_wc_bytes" != "0" ]; then + echo $"Note: There is a device blacklist active! Only activating visible DASDs." + fi + local sys + while read sys; do + if ! sysecho $sys/online 1; then + echo $"Could not set DASD ${sys##*/} online" + fi + done < <(find /sys/bus/ccw/drivers/dasd-eckd/ -name "*.?.????" 2>/dev/null;\ + find /sys/bus/ccw/drivers/dasd-fba/ -name "*.?.????" 2>/dev/null) + ;; + probeonly|nopav|nofcx) + if [ -z "$handle" ]; then + echo $"DASD option $dasditem not supported by installer" + fi + ;; + "") continue ;; # empty range + *) local range features rangegood="yes" + IFS='(' + read range features <<< "$dasditem" + unset IFS + # parse: dev OR dev'-'dev + local lo=${range%%-*} + [[ "$lo" =~ (^[[:xdigit:]]+\.[0-3]\.[[:xdigit:]]{4}$)|(^[[:xdigit:]]{3,4}$) ]] + case $? in + 0) # string matched the pattern + lo=$(canonicalize_devno $lo) ;; + 1) # string did not match the pattern + rangegood="no" + if [ -z "$handle" ]; then + echo $"Incorrect format for lower bound of DASD range $range: $lo" + allgood="no" + fi + ;; + 2) echo "l.$LINENO: syntax error in regex of match operator =~, code needs to be fixed" 1>&2 ;; + *) echo "l.$LINENO: unexpected return code of regex match operator =~, code needs to be fixed" 1>&2 ;; + esac + if [ "${range//*-*/}" = "" ]; then + local hi=${range##*-} + [[ "$hi" =~ (^[[:xdigit:]]+\.[0-3]\.[[:xdigit:]]{4}$)|(^[[:xdigit:]]{3,4}$) ]] + case $? in + 0) # string matched the pattern + hi=$(canonicalize_devno $hi) + if [ "${lo%.*}" != "${hi%.*}" ]; then + echo $"Prefixes of DASD range $range do not match: ${lo%.*} != ${hi%.*}" + rangegood="no" + allgood="no" + fi + ;; + 1) # string did not match the pattern + rangegood="no" + if [ -z "$handle" ]; then + echo $"Incorrect format for upper bound of DASD range $range: $hi" + allgood="no" + fi + ;; + 2) echo "l.$LINENO: syntax error in regex of match operator =~, code needs to be fixed" 1>&2 ;; + *) echo "l.$LINENO: unexpected return code of regex match operator =~, code needs to be fixed" 1>&2 ;; + esac + fi + if [ "${features//*)/}" != "" ]; then + if [ -z "$handle" ]; then + echo $"Missing closing parenthesis at features of DASD range $range: ($features" + allgood="no" + fi + fi + local attrs="" + if [ -n "$features" ]; then + features="${features%)}" + while read feature; do + case $feature in + ro) attrs=$attrs" readonly" ;; + diag) attrs=$attrs" use_diag" ;; + erplog|failfast) attrs=$attrs" "$feature ;; + *) if [ -z "$handle" ]; then + echo $"Unknown DASD feature for device range $range: $feature" + allgood="no" + fi + ;; + esac + done < <(echo $features | sed 's/:/\n/g') + fi + [ "$rangegood" = "yes" ] || continue + [ "$handle" = "yes" ] || continue + # now apply $attrs and set DASDs $lo to $hi online + [ -z "$hi" ] && hi=$lo + local devno lodevno=$((0x${lo##*.})) hidevno=$((0x${hi##*.})) + local dasdconf="/etc/dasd.conf" + for ((devno=$lodevno; $devno <= $hidevno; ++devno)); do + local devbusid=$(printf "%s.%04x" ${lo%.*} $devno) + local sys="/sys/bus/ccw/devices/"$devbusid + echo -n "$devbusid" >> $dasdconf + for attr in $attrs; do + if [ "$attr" = "use_diag" ]; then + # diag discipline cannot be auto-loaded + modprobe dasd_diag_mod + fi + if [ ! -f $sys/$attr ]; then + echo $"DASD $devbusid does not provide attribute $attr" + continue + fi + if ! sysecho $sys/$attr 1; then + echo $"Could not set attribute $attr for DASD $devbusid" + fi + echo -n " $attr=1" >> $dasdconf + done + if [ ! -f $sys/online ]; then + echo $"DASD $devbusid not found" + continue + fi + if ! sysecho $sys/online 1; then + echo $"Could not set DASD $devbusid online" + fi + echo >> $dasdconf + done + ;; + esac + done < <(echo $DASD | sed 's/,/\n/g') + if [ "$handle" = "yes" ]; then + udevadm settle + dasd_settle_all || return 1 + echo $"Activated DASDs:" + cat /proc/dasd/devices | sed -e 's/ at ([^)]*) is//' -e 's/ at/,/' + fi + if [ "$allgood" = "yes" ]; then + return 0 + else + return 1 + fi +} + +function syntax_check_dasd() { + parse_dasd + return $? +} + +function handle_dasd() { + parse_dasd -h + return $? +} + +function question_prefix_dasd() { + echo -n $"DASD range" +} + +function question_choices_dasd() { + echo $" (e.g. 200-203,205 or ? for help). Default is autoprobing:" +} + +function helptext_dasd() { + echo $" Help text for DASD range:" + echo $" Comma separated list of ranges of device bus IDs." + echo $" Default is autoprobing (not recommended)." + echo $" Examples would be: 200-203 or 200,201,202,203 or 0.0.0200-0.0.0203,0.0.0205" +} + +function exception_dasd() { + [ -z "$DASD" ] && DASD="autodetect" +} + +function do_dasd() { + ask DASD \ + question_prefix_dasd question_choices_dasd \ + -h helptext_dasd -e exception_dasd -s syntax_check_dasd -c handle_dasd +} + +### FCP + +function syntax_check_fcp() { + local allgood="yes" + local i + for i in ${!FCP_*}; do + local -a fcp + local devno wwpn lun + read -a fcp <<< "${!i}" + case ${#fcp[@]} in + 3) + devno=${fcp[0]} + wwpn=${fcp[1]} + lun=${fcp[2]} + ;; + 5) + devno=${fcp[0]} + wwpn=${fcp[2]} + lun=${fcp[4]} + echo $"Deprecated number of FCP arguments (5 instead of 3): " + echo $" $i=\"${!i}\"" + echo $" should instead be: " + echo $" $i=\"$devno $wwpn $lun\"" + ;; + *) + echo $"Unsupported number of FCP arguments (${#fcp[@]} instead of 3) in:" + echo $" $i=\"${!i}\"" + allgood="no" + continue + ;; + esac + [[ "$devno" =~ (^[[:xdigit:]]+\.[0-3]\.[[:xdigit:]]{4}$)|(^[[:xdigit:]]{3,4}$) ]] + case $? in + 0) ;; # string matched the pattern + 1) # string did not match the pattern + echo $"Incorrect format for FCP device $devno in:" + echo $" $i=\"${!i}\"" + allgood="no" + ;; + 2) + echo "l.$LINENO: syntax error in regex of match operator =~, code needs to be fixed" 1>&2 + ;; + *) + echo "l.$LINENO: unexpected return code of regex match operator =~, code needs to be fixed" 1>&2 + ;; + esac + # zfcp.py:class ZFCPDevice would also accept WWPN without leading 0x + [[ "$wwpn" =~ ^0x[[:xdigit:]]{16}$ ]] + case $? in + 0) ;; # string matched the pattern + 1) # string did not match the pattern + echo $"Incorrect format for FCP WWPN $wwpn in:" + echo $" $i=\"${!i}\"" + allgood="no" + ;; + 2) echo "l.$LINENO: syntax error in regex of match operator =~, code needs to be fixed" 1>&2 ;; + *) echo "l.$LINENO: unexpected return code of regex match operator =~, code needs to be fixed" 1>&2 ;; + esac + # zfcp.py:class ZFCPDevice would also accept LUN without leading 0x + # zfcp.py:class ZFCPDevice would also accept 16 bit LUN and pads with 0 + [[ "$lun" =~ ^0x[[:xdigit:]]{8}0{8}$ ]] + case $? in + 0) ;; # string matched the pattern + 1) # string did not match the pattern + echo $"Incorrect format for FCP LUN $lun in:" + echo $" $i=\"${!i}\"" + allgood="no" + ;; + 2) + echo "l.$LINENO: syntax error in regex of match operator =~, code needs to be fixed" 1>&2 + ;; + *) + echo "l.$LINENO: unexpected return code of regex match operator =~, code needs to be fixed" 1>&2 + ;; + esac + done + if [ "$allgood" = "yes" ]; then + return 0 + else + return 1 + fi +} + +### + +function show_parms() { + # The only issue with this stateless approach to showing parameters based + # on their content being non-empty is, that parameters with defaults + # such as LAYER2, (PORTNAME,) CTCPROT, PORTNO (,MACADDR) won't be shown + # if the user just hit enter, so the parm file would be "incomplete". + # However this is not easy to fix in here, since it would require the + # inter-parameter dependenies coded below in the main part, e.g. an + # empty LAYER2 should only be printed with default value if $NETTYPE=qeth. + # For the time being, at least the parameters LAYER2, PORTNAME, and CTCPROT + # only get asked on being empty if not running in kickstart mode. + cat << EOF +NETTYPE=$NETTYPE +IPADDR=$IPADDR +NETMASK=$NETMASK +GATEWAY=$GATEWAY +HOSTNAME=$HOSTNAME +EOF + [ "$SUBCHANNELS" ] && echo "SUBCHANNELS=$SUBCHANNELS" + [ "$LAYER2" ] && echo "LAYER2=$LAYER2" + [ "$VSWITCH" ] && echo "VSWITCH=$VSWITCH" + [ "$MACADDR" ] && echo "MACADDR=$MACADDR" + [ "$PORTNAME" ] && echo "PORTNAME=$PORTNAME" + [ "$PORTNO" ] && echo "PORTNO=$PORTNO" + [ "$PEERID" ] && echo "PEERID=$PEERID" + [ "$CTCPROT" ] && echo "CTCPROT=$CTCPROT" + if [ -n "$mmtu_was_set" ]; then + echo "MMTU=\"$MMTU\"" + elif [ -n "$mtu_was_set" ]; then + echo "MTU=$MTU" + fi + [ "$DNS" ] && echo "DNS=$DNS" + [ "$SEARCHDNS" ] && echo "SEARCHDNS=$SEARCHDNS" + [ "$DASD" ] && echo "DASD=$DASD" +} + +function final_check() { + # final check && break + if [ -z "$interaction_happened" ]; then + # if parm file was good enough just continue without interaction + break + return 0 + fi + while : ; do + # optionally consider "continue" as default + # but then again the user may inadvertently continue + echo + echo $"c) continue, p) parm file/configuration, n) network state, r) restart, s) shell" + local answer + read answer + case $answer in + c) return 0 ;; + p) echo + show_parms ;; + n) # show interfaces and routing table + ifconfig -a + if [ "$ipv6" ]; then + #route -n -A inet6 + # the following produces more compact output for 80 columns + ip -6 route show | grep -v "^unreachable " + else + route -n + fi + ;; + d) # show active DASDs with some useful details + echo $"Activated DASDs:" + cat /proc/dasd/devices|sed -e 's/ at ([^)]*) is//' -e 's/ at/,/' + ;; + r) break ;; + s) echo $"Enter 'exit' at the shell prompt to get back to the installation dialog." + /bin/bash + ;; + esac + done + return 1 +} + +### MAIN ### + +init_main +udev_setup + +# Parse configuration +if [ -n "$CMSDASD" -a -n "$CMSCONFFILE" ]; then + readcmsfile $CMSDASD $CMSCONFFILE + source /tmp/$CMSCONFFILE #2>/dev/null +fi + +if [ -r /sys/firmware/ipl/ipl_type ]; then + #local ipl_type + read ipl_type < /sys/firmware/ipl/ipl_type + if [ "$ipl_type" = "fcp" ]; then + while : ; do + echo $"Your IPL device is set to FCP." + echo $"Would you like to perform a CD-ROM/DVD-ROM installation? (y/n)" + #local do_cd_install + read do_cd_install + case $do_cd_install in + y|Y|[Yy][Ee][Ss]) + # precondition: zfcp driver incl. dependencies loaded + #local CD_DEVICE WWPN LUN + read CD_DEVICE < /sys/firmware/ipl/device + read WWPN < /sys/firmware/ipl/wwpn + read LUN < /sys/firmware/ipl/lun + zfcp_cio_free -d $CD_DEVICE \ + || echo $"Device $CD_DEVICE could not be cleared from device blacklist" + sysecho /sys/bus/ccw/drivers/zfcp/$CD_DEVICE/online 1 \ + || echo $"Could not set FCP device $CD_DEVICE online" + udevadm settle + # port (WWPN) appears automatically + sysecho /sys/bus/ccw/drivers/zfcp/$CD_DEVICE/$WWPN/unit_add $LUN \ + || echo $"Could not add LUN $LUN at WWPN $WWPN on FCP device $CD_DEVICE" + udevadm settle + break + ;; + n|N|[Nn][Oo]) + break + ;; + *) + echo + echo $"*** INVALID ANSWER: $do_cd_install" + echo + unset do_cd_install + ;; + esac + done + fi +fi + +# Perform a network installation + +[ -n "$MTU" ] && mtu_was_set=$MTU +[ -n "$MMTU" ] && mmtu_was_set=$MMTU +[ -n "$VSWITCH" ] && vswitch_was_set=$VSWITCH + +[ -n "$CHANDEV" ] && do_chandev +[ -n "$NETWORK" ] && do_network +[ -n "$BROADCAST" ] && do_broadcast + +# [ -z "${cardtype//OSD_*/}" ] can be used to check for real OSA + +# Check for missing parameters, prompt for them if necessary +while : ; do + + # do not show list of possible network device configurations, if: + # - running unattended install with kickstart + # - relevant parameters have already been specified in parm file + # (a possible optimization would be matching those parms to table entry) + # - dialog has not been restarted + [ -n "$reenter" \ + -o -z "$RUNKS" -a \( -z "$NETTYPE" -o -z "$SUBCHANNELS" \) ] && \ + dialog_network_table + if isVM; then + echo $"* NOTE: To enter default or empty values press enter twice. *" + fi + do_nettype + + # precondition: driver (qeth/lcs/ctcm) loaded incl. dependencies + do_subchannels + if [ "$NETTYPE" = "qeth" ]; then + [ -z "$reenter" -a -n "$RUNKS" -a -z "$PORTNAME" ] || \ + [ -n "${cardtype//OSD_*/}" ] || do_portname + # See also https://bugzilla.redhat.com/show_bug.cgi?id=439461 + # + # If running in kickstart mode (unattended), we assume no + # interaction and the user won't get asked for PORTNO. + # Otherwise the user will be asked for PORTNO. + # If the user specified PORTNO in parm/conf file, PORTNO gets + # respected (or the user will be asked if it was wrong). + if [ -f /sys/devices/qeth/$SCH_R_DEVBUSID/portno ]; then + # driver support exists since RHEL5.2 + [ -z "$reenter" -a -n "$RUNKS" -a -z "$PORTNO" ] || \ + [ -n "${cardtype//OSD_*/}" ] || do_portno + fi + do_layer2 + # set device online to know the device name + # and to know if it's OSD/HiperSockets/GuestLAN BUT do not + # try to ifconfig the device up since that requires + # setting the mac address before (if applicable). + set_device_online || workflow_item_menu noredo + # MAC address handling is not part of + # https://bugzilla.redhat.com/show_bug.cgi?id=233376 + # Instead the additions come from + # https://bugzilla.redhat.com/show_bug.cgi?id=248049 + # The new parms VSWITCH and MACADDR are described in + # the RHEL 5.1 release notes. + if isLayer2; then + if [ -z "$VSWITCH" -o "$VSWITCH" == 0 ]; then + do_macaddr + fi + fi + elif [ "$NETTYPE" = "ctc" ]; then + [ -z "$reenter" -a -n "$RUNKS" -a -z "$CTCPROT" ] || do_ctcprot + set_device_online || workflow_item_menu noredo + elif [ "$NETTYPE" = "lcs" ]; then + [ -n "$RUNKS" -a -z "$PORTNAME" ] && PORTNAME=0 + do_lcs_portno + set_device_online || workflow_item_menu noredo + fi + + # device needs to be up before configuring with ifconfig/ip in + # configure_ipv6_address/configure_ipv4_address/configure_ipv4_address + set_device_up || workflow_item_menu noredo + + [ "$HOSTNAME" = "(none)" ] && unset HOSTNAME + do_hostname + + # Note: The workflow_item_menu does a rollback_config on restart + # dialog, i.e. hardware config has been reset and it is impossible to + # only restart halfway at IPADDR. + do_ipaddr + if [ "$ipv6" ]; then + # this branch is all IPv6 and at the same time also NETTYPE==qeth + do_netmask_v6 + handle_mtu + configure_ipv6_address || workflow_item_menu noredo + do_gateway_v6 + else + # Consider IPv4 as default, even for unknown IP versions + # due to invalid input for IPADDR ignored by the user previously + # (neither ipv6 nor ipv4 is set). + # Otherwise we would skip things like NETMASK or GATEWAY + # and jump forward to DNS which is probably not what we want. + if [ "$NETTYPE" = "qeth" ] || [ "$NETTYPE" = "lcs" ]; then + do_netmask + handle_mtu + configure_ipv4_address || workflow_item_menu noredo + do_gateway + else # ctc0 + if [ -z "$NETMASK" ]; then + # If the user did not supply netmask, we add the right one. + # Netmask MUST be present, + # or pumpSetupInterface() blows routes. + NETMASK="255.255.255.255" + fi + # don't ask for MTU, but use it if set in the parm file + # don't overwrite MMTU if it has been set for CTC + [ "$NETTYPE" = "ctc" -a -z "$MTU" -a -z "$MMTU" ] && \ + MMTU="mtu 1500" + do_ptp_gateway + configure_ipv4_ptp || workflow_item_menu noredo + fi + fi + + do_dns + [ -n "$DNS" ] && do_searchdns + + do_dasd + + echo $"Initial configuration completed." + final_check && break + rollback_config + reenter="yes" + +done # outer dialog loop + +if [ -z "$testing" ]; then + + # convert to space-separated lists + if [ -n "$SEARCHDNS" ]; then + SEARCHDNS=$(echo $SEARCHDNS |sed -e 's/:/ /g') + for i in "$SEARCHDNS"; do echo "search $i"; done >> /etc/resolv.conf + fi + if [ -n "$DNS" ]; then + if [ "$ipv6" ]; then + RESOLVDNS=$(echo $DNS |sed -e 's/,/ /g') + else + RESOLVDNS=$(echo $DNS |sed -e 's/:/ /g') + fi + for i in $RESOLVDNS; do echo "nameserver $i"; done >> /etc/resolv.conf + fi + + # make sure we have an /etc/hosts file (originally required for telnetd, + # which is no longer included) + if [ ! -z "$HOSTNAME" -a ! -z "$IPADDR" ]; then + echo -e "$IPADDR\t$HOSTNAME $(echo $HOSTNAME | cut -d '.' -f 1)" >> /etc/hosts + fi + +fi # testing + +# syntax check to give user early feedback on parameters provided in parm file +# (he probably won't notice the logs written by anaconda later on) +syntax_check_fcp +# currently we ignore failed syntax checks since FCP parms are non-interactive +for i in ${!FCP_*}; do + echo "${!i}" >> /etc/zfcp.conf +done +# cio_ignore handling for FCP should happen when the content of /etc/zfcp.conf +# will actually be processed which is in anaconda's zfcp.py ZFCP::readConfig() + +# TODO/FIXME: also need to pass IPv6 decision to loader/anaconda +# [ "$ipv6" ] && echo "IPV6=yes" + +# transfer options into install environment +# loader now uses ifcfg instead of install.cfg to receive our network config + +# additionally, loader's readNetInfo needs to know our DEVICE name +echo $DEVICE > /tmp/s390net + +if [ "$ipv6" ]; then + DNS1=$(echo $DNS | cut -d ',' -f 1) + DNS2=$(echo $DNS | cut -d ',' -f 2) +else + DNS1=$(echo $DNS | cut -d ':' -f 1) + DNS2=$(echo $DNS | cut -d ':' -f 2) +fi + +NETSCRIPTS="/etc/sysconfig/network-scripts" +IFCFGFILE="$NETSCRIPTS/ifcfg-$DEVICE" +if [ ! -d "$NETSCRIPTS" ]; then + mkdir -p $NETSCRIPTS +fi + +# to please NetworkManager on startup in loader before loader reconfigures net +cat > /etc/sysconfig/network << EOF +HOSTNAME=$HOSTNAME +EOF +if [ "$ipv6" ]; then + echo "NETWORKING_IPV6=yes" >> /etc/sysconfig/network +else + echo "NETWORKING=yes" >> /etc/sysconfig/network +fi + +cat > $IFCFGFILE << EOF +DEVICE=$DEVICE +ONBOOT=yes +BOOTPROTO=static +MTU=$MTU +SUBCHANNELS=$SUBCHANNELS +EOF +if [ "$ipv6" ]; then + cat >> $IFCFGFILE << EOF +IPV6INIT=yes +IPV6_AUTOCONF=no +IPV6ADDR=$IPADDR/$NETMASK +IPV6_DEFAULTGW=$GATEWAY +EOF +else + cat >> $IFCFGFILE << EOF +IPADDR=$IPADDR +NETMASK=$NETMASK +BROADCAST=$BROADCAST +GATEWAY=$GATEWAY +EOF +fi +# real DNS config for NetworkManager to generate /etc/resolv.conf +[ "$DNS1" != "" ] && echo "DNS1=$DNS1" >> $IFCFGFILE +[ "$DNS2" != "" ] && echo "DNS2=$DNS2" >> $IFCFGFILE +# just to please loader's readNetInfo && writeEnabledNetInfo +# which eats DNS1,DNS2,... and generates it themselves based on DNS +if [ "$ipv6" ]; then + [ "$DNS" != "" ] && echo "DNS=\"$DNS\"" >> $IFCFGFILE +else + [ "$DNS" != "" ] && echo "DNS=\"$(echo $DNS|sed -e 's/:/,/g')\"" >> $IFCFGFILE +fi +# colons in SEARCHDNS already replaced with spaces above for /etc/resolv.conf +[ "$SEARCHDNS" != "" ] && echo "DOMAIN=\"$SEARCHDNS\"" >> $IFCFGFILE +[ "$NETTYPE" != "" ] && echo "NETTYPE=$NETTYPE" >> $IFCFGFILE +[ "$PEERID" != "" ] && echo "PEERID=$PEERID" >> $IFCFGFILE +[ "$PORTNAME" != "" ] && echo "PORTNAME=$PORTNAME" >> $IFCFGFILE +[ "$CTCPROT" != "" ] && echo "CTCPROT=$CTCPROT" >> $IFCFGFILE +[ "$MACADDR" != "" ] && echo "MACADDR=$MACADDR" >> $IFCFGFILE +optstr="" +for option in LAYER2 PORTNO; do + [ -z "${!option}" ] && continue + [ -n "$optstr" ] && optstr=${optstr}" " + optstr=${optstr}$(echo ${option} | tr [[:upper:]] [[:lower:]])"="${!option} +done +# write single quotes since network.py removes double quotes but we need quotes +echo "OPTIONS='$optstr'" >> $IFCFGFILE +unset option +unset optstr + +if [ -z "$testing" ]; then + + # so that the vars get propagated into the sshd shells + mkdir /.ssh + cat >> /.ssh/environment <<EOF +LD_LIBRARY_PATH=$LD_LIBRARY_PATH +PATH=$PATH +HOME=$HOME +PYTHONPATH=$PYTHONPATH +EOF + + cat >> /etc/profile <<EOF +LD_LIBRARY_PATH=$LD_LIBRARY_PATH +PATH=$PATH +HOME=$HOME +PYTHONPATH=$PYTHONPATH +export LD_LIBRARY_PATH PATH HOME PYTHONPATH +EOF + + if [ -n "$DISPLAY" ]; then + echo "export DISPLAY=$DISPLAY" >> /etc/profile + fi + + # I'm tired of typing this out... + echo "loader" >> /.bash_history + + echo -n $$ > /var/run/init.pid + + # shutdown (halt) on SIGUSR1 + trap doshutdown SIGUSR1 + # reboot on SIGUSR2 + trap doreboot SIGUSR2 + + startinetd + + if [ -n "$RUNKS" ]; then + /sbin/loader + fi + + doshutdown + +fi # testing + +# ;;; Local Variables: *** +# ;;; mode: sh *** +# ;;; end: *** diff --git a/data/liveinst/Makefile.am b/data/liveinst/Makefile.am index 2f51dfa5e..0da8c6c1c 100644 --- a/data/liveinst/Makefile.am +++ b/data/liveinst/Makefile.am @@ -17,7 +17,7 @@ # # Author: David Cantrell <dcantrell@redhat.com> -SUBDIRS = console.apps pam.d +SUBDIRS = console.apps gnome pam.d if IS_LIVEINST_ARCH dist_sbin_SCRIPTS = liveinst diff --git a/data/liveinst/gnome/Makefile.am b/data/liveinst/gnome/Makefile.am new file mode 100644 index 000000000..174a04fc5 --- /dev/null +++ b/data/liveinst/gnome/Makefile.am @@ -0,0 +1,35 @@ +# liveinst/gnome/Makefile.am for anaconda +# +# Copyright (C) 2012 Red Hat, Inc. +# +# This program is free software; you can redistribute it and/or modify +# it under the terms of the GNU Lesser General Public License as published +# by the Free Software Foundation; either version 2.1 of the License, or +# (at your option) any later version. +# +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU Lesser General Public License for more details. +# +# You should have received a copy of the GNU Lesser General Public License +# along with this program. If not, see <http://www.gnu.org/licenses/>. +# +# Author: Kalev Lember <kalevlember@gmail.com> + +welcomedir = $(datadir)/$(PACKAGE_NAME)/gnome +dist_welcome_DATA = fedora-welcome.desktop install-button.png +dist_welcome_SCRIPTS = fedora-welcome + +EXTRA_DIST = fedora-welcome.desktop.in + +CLEANFILES = fedora-welcome.desktop + +MAINTAINERCLEANFILES = Makefile.in + +intltool_merge_verbose = $(intltool_merge_verbose_$(V)) +intltool_merge_verbose_ = $(intltool_merge_verbose_$(AM_DEFAULT_VERBOSITY)) +intltool_merge_verbose_0 = @echo " MERGE "$@; + +fedora-welcome.desktop: fedora-welcome.desktop.in + $(intltool_merge_verbose)LC_ALL=C intltool-merge -q -d -u $(top_srcdir)/po fedora-welcome.desktop.in fedora-welcome.desktop diff --git a/data/liveinst/gnome/fedora-welcome b/data/liveinst/gnome/fedora-welcome new file mode 100755 index 000000000..878094193 --- /dev/null +++ b/data/liveinst/gnome/fedora-welcome @@ -0,0 +1,174 @@ +#!/usr/bin/env gjs-console + +/* + * Copyright (C) 2012 Red Hat, Inc. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of the + * License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + * General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA. + * + * Authors: Cosimo Cecchi <cosimoc@redhat.com> + * + */ + +const Gdk = imports.gi.Gdk; +const GdkPixbuf = imports.gi.GdkPixbuf; +const Gio = imports.gi.Gio; +const GLib = imports.gi.GLib; +const Gtk = imports.gi.Gtk; +const Lang = imports.lang; +const Pango = imports.gi.Pango; + +const Gettext = imports.gettext; +const _ = imports.gettext.gettext; + +const LOCALE_DIR = '/usr/share/locale'; + +let anacondaApp = null; + +function makeLabel(label, button) { + let widget = new Gtk.Label(); + + if (button) + widget.set_markup('<b><span size="x-large" color="white">' + label + '</span></b>'); + else { + widget.set_line_wrap(true); + widget.set_justify(Gtk.Justification.CENTER); + widget.set_margin_top(32); + widget.set_margin_bottom(32); + + widget.set_markup('<span size="large" color="white">' + label + '</span>'); + } + + return widget; +} + +const WelcomeWindow = new Lang.Class({ + Name: 'WelcomeWindow', + + _init: function(application) { + this.window = new Gtk.ApplicationWindow({ application: application, + type: Gtk.WindowType.TOPLEVEL, + default_width: 600, + default_height: 550, + title: _("Welcome to Fedora"), + window_position: Gtk.WindowPosition.CENTER }); + this.window.connect('key-press-event', Lang.bind(this, + function(w, event) { + let key = event.get_keyval()[1]; + + if (key == Gdk.KEY_Escape) + this.window.destroy(); + + return false; + })); + + let mainGrid = new Gtk.Grid({ orientation: Gtk.Orientation.VERTICAL, + row_spacing: 16, + vexpand: true, + hexpand: true, + halign: Gtk.Align.CENTER, + valign: Gtk.Align.CENTER }); + this.window.add(mainGrid); + + let buttonBox = new Gtk.Grid({ orientation: Gtk.Orientation.HORIZONTAL, + column_spacing: 16, + halign: Gtk.Align.CENTER }); + mainGrid.add(buttonBox); + + let tryContent = new Gtk.Box({ orientation: Gtk.Orientation.VERTICAL, + spacing: 16 }); + tryContent.add(new Gtk.Image({ icon_name: 'media-cdrom', + pixel_size: 256 })); + tryContent.add(makeLabel(_("Try Fedora"), true)); + + let tryButton = new Gtk.Button({ child: tryContent }); + buttonBox.add(tryButton); + + let installContent = new Gtk.Box({ orientation: Gtk.Orientation.VERTICAL, + spacing: 16 }); + + // provided by the 'fedora-logos' package + let pix = GdkPixbuf.Pixbuf.new_from_file_at_size( + '/usr/share/icons/Fedora/scalable/apps/anaconda.svg', + 256, 256); + installContent.add(new Gtk.Image({ pixbuf: pix })); + installContent.add(makeLabel(anacondaApp.get_name(), true)); + + let installButton = new Gtk.Button({ child: installContent }); + buttonBox.add(installButton); + + this._label = makeLabel(_("You are currently running Fedora from live media.\nYou can install Fedora now, or choose \"Install to Hard Drive\" in the Activities Overview at any later time."), false); + mainGrid.add(this._label); + + installButton.connect('clicked', Lang.bind(this, + function() { + GLib.spawn_command_line_async('liveinst'); + this.window.destroy(); + })); + + tryButton.connect('clicked', Lang.bind(this, + function() { + buttonBox.destroy(); + this._label.destroy(); + + let image = new Gtk.Image({ file: '/usr/share/anaconda/gnome/install-button.png', + halign: Gtk.Align.CENTER }); + mainGrid.add(image); + + this._label = makeLabel(_("You can choose \"Install to Hard Drive\"\nin the Activities Overview at any later time."), false); + mainGrid.add(this._label); + + let closeLabel = makeLabel(_("Close"), true); + closeLabel.margin = 10; + let button = new Gtk.Button({ child: closeLabel, + halign: Gtk.Align.CENTER }); + button.connect('clicked', Lang.bind(this, + function() { + this.window.destroy(); + })); + mainGrid.add(button); + + mainGrid.show_all(); + })); + } +}); + +Gettext.bindtextdomain('anaconda', LOCALE_DIR); +Gettext.textdomain('anaconda'); + +GLib.set_prgname('fedora-welcome'); +Gtk.init(null, null); +Gtk.Settings.get_default().gtk_application_prefer_dark_theme = true; + +// provided by the 'anaconda' package +anacondaApp = Gio.DesktopAppInfo.new('anaconda.desktop'); +if (!anacondaApp) + anacondaApp = Gio.DesktopAppInfo.new('liveinst.desktop'); + +if (anacondaApp) { + let application = new Gtk.Application({ application_id: 'org.fedoraproject.welcome-screen', + flags: Gio.ApplicationFlags.FLAGS_NONE }); + let welcomeWindow = null; + + application.connect('startup', Lang.bind(this, + function() { + welcomeWindow = new WelcomeWindow(application); + })); + application.connect('activate', Lang.bind(this, + function() { + welcomeWindow.window.show_all(); + })); + + application.run(ARGV); +} diff --git a/data/liveinst/gnome/fedora-welcome.desktop.in b/data/liveinst/gnome/fedora-welcome.desktop.in new file mode 100644 index 000000000..bac0e0a15 --- /dev/null +++ b/data/liveinst/gnome/fedora-welcome.desktop.in @@ -0,0 +1,9 @@ +[Desktop Entry] +_Name=Welcome to Fedora +Exec=/usr/share/anaconda/gnome/fedora-welcome +Icon=/usr/share/icons/Fedora/256x256/places/start-here.png +Terminal=false +Type=Application +StartupNotify=true +NoDisplay=true +X-GNOME-Autostart-enabled=true diff --git a/data/liveinst/gnome/install-button.png b/data/liveinst/gnome/install-button.png Binary files differnew file mode 100644 index 000000000..b7901ff1e --- /dev/null +++ b/data/liveinst/gnome/install-button.png diff --git a/data/liveinst/liveinst b/data/liveinst/liveinst index 930461fec..6c001009b 100755 --- a/data/liveinst/liveinst +++ b/data/liveinst/liveinst @@ -41,16 +41,18 @@ if [[ "$LIVECMD $*" =~ "--liveinst" ]]; then LIVE_INSTALL=1 fi - +# Try to sort out where the live device is if [ -z "$LIVE_BLOCK" ]; then - if [ -b "/dev/mapper/live-osimg-min" ]; then + if [ -b "/run/initramfs/live-baseloop" ]; then + LIVE_BLOCK=`readlink -f /run/initramfs/live-baseloop` + elif [ -b "/dev/mapper/live-osimg-min" ]; then LIVE_BLOCK="/dev/mapper/live-osimg-min" - else + elif [ -b "/dev/live-osimg" ]; then LIVE_BLOCK="/dev/live-osimg" fi fi -if [ $LIVE_INSTALL = 1 -a ! -b $LIVE_BLOCK ]; then +if [ $LIVE_INSTALL = 1 -a ! -b "$LIVE_BLOCK" ]; then zenity --error --title="Not a Live image" --text "Can't do live image installation unless running from a live image" exit 1 fi @@ -60,7 +62,7 @@ fi # loading and lvm control in this file, too. ANACONDA=${LIVECMD:=anaconda --liveinst --method=livecd://$LIVE_BLOCK $INSTLANG} -# load modules that would get loaded by the loader... (#230945) +# load modules that would get loaded by the initramfs (#230945) for i in raid0 raid1 raid5 raid6 raid456 raid10 dm-mod dm-zero dm-mirror dm-snapshot dm-multipath dm-round-robin vfat dm-crypt cbc sha256 lrw xts iscsi_tcp iscsi_ibft; do /sbin/modprobe $i 2>/dev/null ; done export ANACONDA_PRODUCTNAME=$( cat /etc/system-release | sed -r -e 's/ *release.*//' ) @@ -117,14 +119,17 @@ if [ ! -z "$UPDATES" ]; then fi curl -o /tmp/updates.img $UPDATES - mkdir /tmp/updates # We officially support two updates.img formats: a filesystem image, and # a compressed cpio blob. if [ ! -z "$(file /tmp/updates.img | grep 'gzip compressed data')" ]; then - ( cd /tmp/updates ; gzip -dc /tmp/updates.img | cpio -id ) + ( cd / ; gzip -dc /tmp/updates.img | cpio -id ) else - mount -t auto /tmp/updates.img /tmp/updates + mkdir /tmp/updates.disk + mount -t auto /tmp/updates.img /tmp/updates.disk + cp -Rt / /tmp/updates.disk/* + umount /tmp/updates.disk + rmdir /tmp/updates.disk fi export PYTHONPATH=/tmp/updates:$PYTHONPATH diff --git a/data/systemd/Makefile.am b/data/systemd/Makefile.am index 37a5eb1fc..8579ece04 100644 --- a/data/systemd/Makefile.am +++ b/data/systemd/Makefile.am @@ -18,5 +18,17 @@ # Author: Chris Lumens <clumens@redhat.com> systemddir = /lib/systemd/system -dist_systemd_DATA = anaconda-shell@.service anaconda.target loader.service instperf.service +generatordir = /lib/systemd/system-generators + +dist_systemd_DATA = anaconda@.service \ + anaconda.target \ + anaconda-shell@.service \ + instperf.service \ + anaconda-sshd.service \ + anaconda-cleanup-initramfs.service + +dist_generator_SCRIPTS = anaconda-generator + +dist_sbin_SCRIPTS = anaconda-cleanup-initramfs + MAINTAINERCLEANFILES = Makefile.in diff --git a/data/systemd/anaconda-cleanup-initramfs b/data/systemd/anaconda-cleanup-initramfs new file mode 100755 index 000000000..f2bd27440 --- /dev/null +++ b/data/systemd/anaconda-cleanup-initramfs @@ -0,0 +1,35 @@ +#!/bin/bash +# anaconda-cleanup-initramfs - clean up initramfs to save RAM. +# +# Normal systems just throw away the initramfs after boot, since they have a +# copy of it in /boot/initramfs-$(uname -r).img that they can unpack and use +# to shut down the system cleanly. (See dracut-shutdown.service.) +# +# We have to keep initramfs because we don't have it laying around in /boot, +# and we might want to read some files out of it (e.g. /etc/cmdline*) +# +# There are still redundant/unneeded files, though, and we can save RAM by +# cleaning those up. + +systemd-notify --pid --status="Removing unneeded files..." +# the runtime has all the firmware/modules we need. +# removing the ssl certs saves another easy ~1MB. +rm -rf /run/initramfs/usr/lib/{firmware,modules} \ + /run/initramfs/etc/ssl + +# Try to compress the remaining initramfs contents. +# 99% of the RAM used by initramfs is in usr/, so just compress/remove that. +# (this also means we save etc/cmdline* and we don't have to move mounts) + +# check for cpio and pigz/gzip. +# (xz would be ~4MB smaller but uses 100MB RAM (!). gzip uses ~2MB.) +type -P cpio >/dev/null || exit 0 +gzip=$(type -P pigz || type -P gzip) || exit 0 + +# systemd-notify --ready --> continue startup, do the rest in the background +systemd-notify --ready --status="Compressing initramfs contents..." + +mkdir -p /boot +initramfs=/boot/initramfs-$(uname -r).img +find /run/initramfs/usr | cpio -co 2>/dev/null | $gzip -c > $initramfs +rm -rf /run/initramfs/usr diff --git a/data/systemd/anaconda-cleanup-initramfs.service b/data/systemd/anaconda-cleanup-initramfs.service new file mode 100644 index 000000000..1d10bfc7a --- /dev/null +++ b/data/systemd/anaconda-cleanup-initramfs.service @@ -0,0 +1,11 @@ +[Unit] +Description=Clean Up Initramfs +Before=anaconda@.service +ConditionPathIsDirectory=/run/initramfs/usr/lib/modules + +[Service] +Type=notify +NotifyAccess=all +RemainAfterExit=yes +Nice=19 +ExecStart=/usr/sbin/anaconda-cleanup-initramfs diff --git a/data/systemd/anaconda-generator b/data/systemd/anaconda-generator new file mode 100755 index 000000000..cb4704023 --- /dev/null +++ b/data/systemd/anaconda-generator @@ -0,0 +1,46 @@ +#!/bin/bash +# anaconda-generator: generate services needed for anaconda operation + +# Source in the dracut lib so we can parse cmd line arguments +. /run/initramfs/usr/lib/dracut-lib.sh + +# set up dirs +systemd_dir=/lib/systemd/system +target_dir=$systemd_dir/anaconda.target.wants +mkdir -p $target_dir + +# create symlink anaconda.target.wants/SERVICE@TTY.service +service_on_tty() { + local service="$1" tty="$2" + local service_instance="${service/@.service/@$tty.service}" + ln -sf $systemd_dir/$service $target_dir/$service_instance +} + +# find the real tty for /dev/console +tty="console" +while [ -f /sys/class/tty/$tty/active ]; do + tty=$(< /sys/class/tty/$tty/active) + tty=${tty##* } # last item in the list +done +consoletty="$tty" + +# put anaconda on the real console +service_on_tty anaconda@.service $consoletty + +# put a shell on tty2 and the first virtualization console we find +for tty in tty2 hvc0 hvc1 xvc0 hvsi0 hvsi1 hvsi2; do + [ "$tty" = "$consoletty" ] && continue + if [ -d /sys/class/tty/$tty ]; then + service_on_tty anaconda-shell@.service $tty + [ "$tty" != "tty2" ] && break + fi +done + +# enable the ssh service +# NOTE: We have a match for s390x here because the console sucks on that +# platform. Really any platform with a crappy console that can't do curses +# or have multiple VTs should get sshd spawned automatically, but we don't +# yet have a good way of detecting these platforms. +if getargbool 0 inst.sshd || [ $(uname -m) = "s390x" ]; then + ln -sf $systemd_dir/anaconda-sshd.service $target_dir/anaconda-sshd.service +fi diff --git a/data/systemd/anaconda-shell@.service b/data/systemd/anaconda-shell@.service index d845cde22..41c4469a3 100644 --- a/data/systemd/anaconda-shell@.service +++ b/data/systemd/anaconda-shell@.service @@ -2,18 +2,16 @@ # This is roughly equivalent to getty@.service, except we go straight to bash [Unit] Description=Shell on %I -BindTo=dev-%i.device -After=dev-%i.device +After=systemd-user-sessions.service plymouth-quit-wait.service [Service] -Environment=TERM=linux WorkingDirectory=/ ExecStart=-/sbin/agetty -n -l /bin/bash -o '--login' %I 38400 Restart=always RestartSec=0 -TimeoutSec=0 -TTYPath=/dev/%i +TTYPath=/dev/%I TTYReset=yes TTYVHangup=yes TTYVTDisallocate=yes +KillMode=process KillSignal=SIGHUP diff --git a/data/systemd/anaconda-sshd.service b/data/systemd/anaconda-sshd.service new file mode 100644 index 000000000..2588a533a --- /dev/null +++ b/data/systemd/anaconda-sshd.service @@ -0,0 +1,11 @@ +[Unit] +Description=OpenSSH server daemon +Before=anaconda.target +After=syslog.target network.target + +[Service] +EnvironmentFile=/etc/sysconfig/sshd +ExecStartPre=/usr/sbin/sshd-keygen +ExecStartPre=/usr/sbin/handle-sshpw +ExecStart=/usr/sbin/sshd -D $OPTIONS -f /etc/ssh/sshd_config.anaconda +ExecReload=/bin/kill -HUP $MAINPID diff --git a/data/systemd/anaconda.target b/data/systemd/anaconda.target index 844999e29..983ff3b77 100644 --- a/data/systemd/anaconda.target +++ b/data/systemd/anaconda.target @@ -1,7 +1,11 @@ [Unit] -Description=The anaconda installation program +Description=Anaconda System Services Requires=basic.target -Conflicts=rescue.service rescue.target -After=basic.target rescue.service rescue.target +After=basic.target AllowIsolate=yes -Wants=loader.service anaconda-shell@tty2.service anaconda-shell@hvc1.service +Before=anaconda@.service +Wants=instperf.service +Wants=rsyslog.service +Wants=udev-settle.service +Wants=NetworkManager.service +Wants=plymouth-quit.service plymouth-quit-wait.service diff --git a/data/systemd/anaconda@.service b/data/systemd/anaconda@.service new file mode 100644 index 000000000..03ecabb17 --- /dev/null +++ b/data/systemd/anaconda@.service @@ -0,0 +1,13 @@ +[Unit] +Description=Anaconda +After=anaconda.target + +[Service] +Environment=HOME=/root MALLOC_CHECK_=2 MALLOC_PERTURB_=204 PATH=/usr/bin:/bin:/sbin:/usr/sbin:/mnt/sysimage/bin:/mnt/sysimage/usr/bin:/mnt/sysimage/usr/sbin:/mnt/sysimage/sbin +Type=oneshot +WorkingDirectory=/root +ExecStart=/usr/sbin/anaconda +StandardInput=tty-force +TTYPath=/dev/%I +TTYReset=yes +TimeoutSec=0 diff --git a/data/systemd/fedora-import-state b/data/systemd/fedora-import-state new file mode 100644 index 000000000..a853ab9cd --- /dev/null +++ b/data/systemd/fedora-import-state @@ -0,0 +1,14 @@ +#!/bin/bash +# fedora-import-state: import state files from initramfs (e.g. network config) + +# exit early if root isn't writeable +[ -w / ] || exit 0 + +# copy state into root +cd /run/initramfs/state +cp -a -t / . + +# run restorecon on the copied files +if [ -e /sys/fs/selinux/enforce ]; then + find . | ( cd /; restorecon -i -f -; ) || : +fi diff --git a/data/systemd/fedora-import-state.service b/data/systemd/fedora-import-state.service new file mode 100644 index 000000000..5294fe172 --- /dev/null +++ b/data/systemd/fedora-import-state.service @@ -0,0 +1,13 @@ +[Unit] +Description=Import network configuration from initramfs +DefaultDependencies=no +ConditionDirectoryNotEmpty=/run/initramfs/state +Conflicts=shutdown.target +Before=shutdown.target emergency.service emergency.target systemd-tmpfiles-setup.service +After=remount-rootfs.service + +[Service] +ExecStart=/lib/systemd/fedora-import-state +Type=oneshot +TimeoutSec=0 +RemainAfterExit=yes diff --git a/data/systemd/instperf.service b/data/systemd/instperf.service index 1e4430bae..df275ba68 100644 --- a/data/systemd/instperf.service +++ b/data/systemd/instperf.service @@ -1,7 +1,7 @@ [Unit] ConditionKernelCommandLine=debug Description=anaconda performance monitor -Before=loader.service +Before=anaconda.service [Service] WorkingDirectory=/ diff --git a/data/systemd/loader.service b/data/systemd/loader.service deleted file mode 100644 index b6d9f4395..000000000 --- a/data/systemd/loader.service +++ /dev/null @@ -1,12 +0,0 @@ -[Unit] -Description=The anaconda loader -Wants=instperf.service rsyslog.service udev-settle.service -After=instperf.service rsyslog.service udev-settle.service - -[Service] -Environment=HOME=/root MALLOC_CHECK_=2 MALLOC_PERTURB_=204 PATH=/usr/bin:/bin:/sbin:/usr/sbin:/mnt/sysimage/bin:/mnt/sysimage/usr/bin:/mnt/sysimage/usr/sbin:/mnt/sysimage/sbin PYTHONPATH=/tmp/updates TERM=linux -Type=oneshot -WorkingDirectory=/root -ExecStart=/sbin/loader -StandardInput=tty-force -TimeoutSec=0 diff --git a/data/ui/adddrive.glade b/data/ui/adddrive.glade index cf8ad47ce..bfce9ee6c 100644 --- a/data/ui/adddrive.glade +++ b/data/ui/adddrive.glade @@ -140,6 +140,39 @@ </child> <child> + <widget class="GtkAlignment" id="alignment2"> + <property name="visible">True</property> + <property name="xalign">0.5</property> + <property name="yalign">0.5</property> + <property name="xscale">1</property> + <property name="yscale">1</property> + <property name="top_padding">0</property> + <property name="bottom_padding">0</property> + <property name="left_padding">18</property> + <property name="right_padding">0</property> + + <child> + <widget class="GtkCheckButton" id="iscsiBindCheck"> + <property name="visible">True</property> + <property name="can_focus">True</property> + <property name="label" translatable="yes">_Bind targets to network interfaces</property> + <property name="use_underline">True</property> + <property name="relief">GTK_RELIEF_NORMAL</property> + <property name="focus_on_click">True</property> + <property name="active">False</property> + <property name="inconsistent">False</property> + <property name="draw_indicator">True</property> + </widget> + </child> + </widget> + <packing> + <property name="padding">0</property> + <property name="expand">False</property> + <property name="fill">False</property> + </packing> + </child> + + <child> <widget class="GtkRadioButton" id="zfcpRadio"> <property name="visible">True</property> <property name="label" translatable="yes">Add _ZFCP LUN</property> @@ -183,6 +216,113 @@ <property name="fill">True</property> </packing> </child> + + <child> + <widget class="GtkHSeparator" id="hseparator1"> + <property name="visible">True</property> + </widget> + <packing> + <property name="padding">0</property> + <property name="expand">True</property> + <property name="fill">True</property> + </packing> + </child> + + <child> + <widget class="GtkHBox" id="hbox2"> + <property name="visible">True</property> + <property name="homogeneous">False</property> + <property name="spacing">7</property> + + <child> + <widget class="GtkLabel" id="label3"> + <property name="visible">True</property> + <property name="label" translatable="yes">Active network interfaces:</property> + <property name="use_underline">False</property> + <property name="use_markup">False</property> + <property name="justify">GTK_JUSTIFY_LEFT</property> + <property name="wrap">False</property> + <property name="selectable">False</property> + <property name="xalign">0.5</property> + <property name="yalign">0.5</property> + <property name="xpad">0</property> + <property name="ypad">0</property> + <property name="ellipsize">PANGO_ELLIPSIZE_NONE</property> + <property name="width_chars">-1</property> + <property name="single_line_mode">False</property> + <property name="angle">0</property> + </widget> + <packing> + <property name="padding">0</property> + <property name="expand">False</property> + <property name="fill">False</property> + </packing> + </child> + + <child> + <widget class="GtkLabel" id="ifaceLabel"> + <property name="visible">True</property> + <property name="label" translatable="yes">None</property> + <property name="use_underline">False</property> + <property name="use_markup">False</property> + <property name="justify">GTK_JUSTIFY_LEFT</property> + <property name="wrap">False</property> + <property name="selectable">False</property> + <property name="xalign">0.5</property> + <property name="yalign">0.5</property> + <property name="xpad">0</property> + <property name="ypad">0</property> + <property name="ellipsize">PANGO_ELLIPSIZE_NONE</property> + <property name="width_chars">-1</property> + <property name="single_line_mode">False</property> + <property name="angle">0</property> + </widget> + <packing> + <property name="padding">0</property> + <property name="expand">False</property> + <property name="fill">False</property> + </packing> + </child> + </widget> + <packing> + <property name="padding">0</property> + <property name="expand">True</property> + <property name="fill">True</property> + </packing> + </child> + + <child> + <widget class="GtkHBox" id="hbox3"> + <property name="visible">True</property> + <property name="homogeneous">False</property> + <property name="spacing">0</property> + + <child> + <placeholder/> + </child> + + <child> + <widget class="GtkButton" id="netconfButton"> + <property name="visible">True</property> + <property name="can_focus">True</property> + <property name="label" translatable="yes">C_onfigure Network</property> + <property name="use_underline">True</property> + <property name="relief">GTK_RELIEF_NORMAL</property> + <property name="focus_on_click">True</property> + </widget> + <packing> + <property name="padding">0</property> + <property name="expand">False</property> + <property name="fill">False</property> + </packing> + </child> + </widget> + <packing> + <property name="padding">0</property> + <property name="expand">False</property> + <property name="fill">False</property> + </packing> + </child> </widget> <packing> <property name="padding">0</property> diff --git a/data/ui/fcoe-config.glade b/data/ui/fcoe-config.glade index 57c72ab8a..dab0fffa4 100644 --- a/data/ui/fcoe-config.glade +++ b/data/ui/fcoe-config.glade @@ -71,6 +71,20 @@ your FCoE switch.</property> <property name="position">2</property> </packing> </child> + <child> + <widget class="GtkCheckButton" id="autovlanCheckbutton"> + <property name="label" translatable="yes">Use auto vlan</property> + <property name="visible">True</property> + <property name="can_focus">True</property> + <property name="receives_default">False</property> + <property name="active">True</property> + <property name="draw_indicator">True</property> + </widget> + <packing> + <property name="expand">False</property> + <property name="position">3</property> + </packing> + </child> </widget> <packing> <property name="position">2</property> |