summaryrefslogtreecommitdiffstats
diff options
context:
space:
mode:
-rw-r--r--debian/Makefile1
-rw-r--r--freebsd/Makefile111
-rw-r--r--linux/Makefile118
-rw-r--r--master.make105
-rw-r--r--redhat/Makefile1
-rw-r--r--slackware/Makefile1
-rw-r--r--solaris/Makefile116
7 files changed, 0 insertions, 453 deletions
diff --git a/debian/Makefile b/debian/Makefile
deleted file mode 100644
index 7ee2460..0000000
--- a/debian/Makefile
+++ /dev/null
@@ -1 +0,0 @@
-include ../linux/Makefile
diff --git a/freebsd/Makefile b/freebsd/Makefile
deleted file mode 100644
index 5bb6523..0000000
--- a/freebsd/Makefile
+++ /dev/null
@@ -1,111 +0,0 @@
-# Makefile for rsyslog
-# Copyright (C) 2004-2007 Rainer Gerhards and Adiscon GmbH
-# This is the distro-specifc part of the Makefile.
-# For details, see http://www.rsyslog.com/doc
-
-#############################################################
-# USER SETTINGS #
-# ------------- #
-# The following lines allow you to customize the way #
-# rsyslog is build. All variables take a value of 0 or zero #
-# with 1 meaning true and 0 meaning false (in most cases #
-# equivalent to "disabled"). If you need to customize any- #
-# thing do it here - and stay away from all other parts #
-# of this file! #
-# #
-# IMPORTANT: after you have made changes, run "make clean" #
-# before any other command! #
-#############################################################
-
-# Enable large file support (typically on, not needed on
-# 64 bit operating systems)
-FEATURE_LARGEFILE=1
-
-# Enable database support (off by default, must be turned
-# on when support for MySQL is desired).
-FEATURE_DB=1
-
-# Enable regular expressions
-FEATURE_REGEXP=1
-
-# Enable RFC 3195 support (REQUIRES LIBLOGGING 0.6.0 or above!)
-FEATURE_RFC3195=0
-
-# Enable multithreading via pthreads (experimental!)
-FEATURE_PTHREADS=1
-
-# Enable zlib compression
-# Depending on the messages, turning zlib compression on
-# results in moderate savings of network traffic.
-FEATURE_NETZIP=1
-
-# For Freebsd, we disable klogd
-FEATURE_KLOGD=0
-
-# Enable debug mode (much slower code)
-FEATURE_DEBUG=0
-
-# The following defines tell us where liblogging is located. This
-# is only needed if we build with RFC 3195 support. By default,
-# liblogging is expected to be present in the our parent directory.
-#
-# THESE PATHES MUST ONLY BE SET IF RSYSLOG IS BUILD WITH
-# RFC 3195 SUPPORT!
-LIBLOGGING_INC=-I../../liblogging/src
-LIBLOGGING_BIN=../../liblogging/src/linux/liblogging.a
-
-#############################################################
-# END OF USER SETTINGS #
-# -------------------- #
-# DO NOT MAKE ANY MODIFICATIONS BELOW THIS POINT! #
-#############################################################
-
-INSTALL = install
-BINDIR = /usr/sbin
-MANDIR = /usr/share/man
-
-
-# now comes the evaluation of the FEATURE_* settings
-.if $(FEATURE_LARGEFILE) == 0
- NOLARGEFILE = -DNOLARGEFILE
-.endif
-
-.if $(FEATURE_DB) == 1
- WITHDB=-DWITH_DB
-.endif
-
-.if $(FEATURE_KLOGD) == 1
- FEATKLOGD=-DFEATURE_KLOGD
-.endif
-
-.if $(FEATURE_NETZIP) == 1
- NETZIP=-DWITH_DB
-.endif
-
-.if $(FEATURE_REGEXP) == 1
- F_REGEXP=-DFEATURE_REGEXP
-.endif
-
-.if $(FEATURE_RFC3195) == 1
- F_RFC3195=-DFEATURE_RFC3195
-.else
- LIBLOGGING_INC=
- LIBLOGGING_BIN=
-.endif
-
-.if $(FEATURE_PTHREADS) == 1
- F_PTHREADS=-DUSE_PTHREADS
- LPTHREAD=-lpthread
-.endif
-
-.if $(FEATURE_DEBUG) == 0
- DBG=-DNDEBUG
-.endif
-
-# Include MySQL client lib if DB is selected
-.ifdef WITHDB
-LIBS = -lmysqlclient -L/usr/local/lib/mysql
-.endif
-
-VPATH = ../
-.include "../master.make"
diff --git a/linux/Makefile b/linux/Makefile
deleted file mode 100644
index 5bd22e0..0000000
--- a/linux/Makefile
+++ /dev/null
@@ -1,118 +0,0 @@
-# Makefile for rsyslog
-# Copyright (C) 2004-2007 Rainer Gerhards and Adiscon GmbH
-# This is the distro-specific part of the Makefile.
-# This makefile here should be suitable for all flavours
-# of linux.
-# For details, see http://www.rsyslog.com/doc
-
-#############################################################
-# USER SETTINGS #
-# ------------- #
-# The following lines allow you to customize the way #
-# rsyslog is build. All variables take a value of 0 or zero #
-# with 1 meaning true and 0 meaning false (in most cases #
-# equivalent to "disabled"). If you need to customize any- #
-# thing do it here - and stay away from all other parts #
-# of this file! #
-# #
-# IMPORTANT: after you have made changes, run "make clean" #
-# before any other command! #
-#############################################################
-
-# Enable large file support (typically on, not needed for
-# 64 bit operating systems)
-FEATURE_LARGEFILE=1
-
-# Enable database support (off by default, must be turned
-# on when support for MySQL is desired).
-FEATURE_DB=0
-
-# Enable regular expressions
-FEATURE_REGEXP=1
-
-# Enable zlib compression
-# Depending on the messages, turning zlib compression on
-# results in moderate savings of network traffic.
-FEATURE_NETZIP=1
-
-# Enable RFC 3195 support (REQUIRES LIBLOGGING 0.6.0 or above!)
-FEATURE_RFC3195=0
-
-# Enable multithreading via pthreads (experimental!)
-FEATURE_PTHREADS=1
-
-# This feature indicates if klogd functionality
-# should be integrated. If it is switched off, klogd
-# is still compiled, but it is an empty shell.
-FEATURE_KLOGD=1
-
-# Enable debug mode (much slower code)
-FEATURE_DEBUG=0
-
-# The following defines tell us where liblogging is located. This
-# is only needed if we build with RFC 3195 support. By default,
-# liblogging is expected to be present in the our parent directory.
-#
-# THESE PATHES MUST ONLY BE SET IF RSYSLOG IS BUILD WITH
-# RFC 3195 SUPPORT!
-LIBLOGGING_INC=-I../../liblogging-0.6.0/src
-LIBLOGGING_BIN=../../liblogging-0.6.0/src/linux/liblogging.a
-
-#############################################################
-# END OF USER SETTINGS #
-# -------------------- #
-# DO NOT MAKE ANY MODIFICATIONS BELOW THIS POINT! #
-#############################################################
-
-INSTALL = install
-BINDIR = /usr/sbin
-MANDIR = /usr/share/man
-
-# now comes the evaluation of the FEATURE_* settings
-ifeq ($(strip $(FEATURE_LARGEFILE)), 0)
- NOLARGEFILE = -DNOLARGEFILE
-endif
-
-ifeq ($(strip $(FEATURE_DB)), 1)
- WITHDB=-DWITH_DB
-endif
-
-ifeq ($(strip $(FEATURE_KLOGD)), 1)
- FEATKLOGD=-DFEATURE_KLOGD
-endif
-
-ifeq ($(strip $(FEATURE_REGEXP)), 1)
- F_REGEXP=-DFEATURE_REGEXP
-endif
-
-ifeq ($(strip $(FEATURE_NETZIP)), 1)
- NETZIP=-DUSE_NETZIP
- LZ=-lz
-endif
-
-ifeq ($(strip $(FEATURE_PTHREADS)), 1)
- F_PTHREADS=-DUSE_PTHREADS
- LPTHREAD=-lpthread
-endif
-
-ifeq ($(strip $(FEATURE_RFC3195)), 1)
- F_RFC3195=-DFEATURE_RFC3195
-else
- LIBLOGGING_INC=
- LIBLOGGING_BIN=
-endif
-
-ifeq ($(strip $(FEATURE_DEBUG)), 0)
- DBG=-DNDEBUG
-endif
-
-# Include MySQL client lib if DB is selected
-ifdef WITHDB
-# use the line below for Linux OTHER than Fedora
-#LIBS = -lmysqlclient -L/usr/local/lib/mysql
-# use the line below for Fedora
-LIBS = -lmysqlclient -L/usr/lib/mysql
-endif
-
-VPATH = ../
-include ../master.make
diff --git a/master.make b/master.make
deleted file mode 100644
index 8c3ab5d..0000000
--- a/master.make
+++ /dev/null
@@ -1,105 +0,0 @@
-# master makefile for rsyslog
-# Copyright (C) 2004-2007 Rainer Gerhards and Adiscon GmbH
-# This is the part of the makefile common to all distros.
-# For details, see http://www.rsyslog.com/doc
-
-CC= gcc
-#CFLAGS= -g -DSYSV -Wall
-# Add the -DMTRACE macro if you would like to use mtrace()
-# to hunt for memory leaks
-# next 2 lines are debug settings
-#LDFLAGS= -g -Wall -fno-omit-frame-pointer
-#CFLAGS= -DSYSV -g -Wall -fno-omit-frame-pointer
-
-CFLAGS= $(RPM_OPT_FLAGS) -O3 -DSYSV -fomit-frame-pointer -Wall -fno-strength-reduce -I/usr/local/include $(NOLARGEFILE) $(WITHDB) $(F_REGEXP) $(DBG) $(F_RFC3195) $(F_PTHREADS)
-#LDFLAGS= -s
-
-# There is one report that under an all ELF system there may be a need to
-# explicilty link with libresolv.a. If linking syslogd fails you may wish
-# to try uncommenting the following define.
-# LIBS = /usr/lib/libresolv.a
-
-# The following define determines whether the package adheres to the
-# file system standard.
-FSSTND = -DFSSTND
-
-# The following define establishes the name of the pid file for the
-# rsyslogd daemon. The library include file (paths.h) defines the
-# name for the rsyslogd pid to be rsyslog.pid.
-SYSLOGD_PIDNAME = -DSYSLOGD_PIDNAME=\"rsyslogd.pid\"
-
-SYSLOGD_FLAGS= -DSYSLOG_INET -DSYSLOG_UNIXAF ${FSSTND} \
- ${SYSLOGD_PIDNAME}
-SYSLOG_FLAGS= -DALLOW_KERNEL_LOGGING
-KLOGD_FLAGS = ${FSSTND} ${KLOGD_START_DELAY}
-
-.c.o:
- ${CC} ${CFLAGS} ${NETZIP} ${LIBLOGGING_INC} -c $(VPATH)$*.c
-
-all: klogd rfc3195d syslogd
-
-test: syslog_tst tsyslogd
-
-install: install_man install_exec
-
-syslogd: syslogd.o pidfile.o template.o stringbuf.o srUtils.o outchannel.o parse.o
- ${CC} ${LDFLAGS} $(LPTHREAD) -o syslogd syslogd.o pidfile.o template.o outchannel.o stringbuf.o srUtils.o parse.o ${LIBS} ${LZ} ${EXTRALIB}
-
-rfc3195d: rfc3195d.o
- ${CC} ${LDFLAGS} -o rfc3195d rfc3195d.o ${LIBLOGGING_BIN}
-
-srUtils.o: srUtils.c srUtils.h liblogging-stub.h rsyslog.h
-stringbuf.o: stringbuf.c stringbuf.h rsyslog.h
-parse.o: parse.c parse.h rsyslog.h
-template.o: template.c template.h stringbuf.h rsyslog.h
-outchannel.o: outchannel.c outchannel.h stringbuf.h syslogd.h rsyslog.h
-rfc3195d.o: rfc3195d.c rsyslog.h
-
-syslogd.o: syslogd.c parse.h template.h stringbuf.h outchannel.h syslogd.h rsyslog.h
- ${CC} ${CFLAGS} ${NETZIP} ${SYSLOGD_FLAGS} -c $(VPATH)syslogd.c
-
-klogd: klogd.o syslog.o pidfile.o ksym.o ksym_mod.o
- ${CC} ${LDFLAGS} -o klogd klogd.o syslog.o pidfile.o ksym.o \
- ksym_mod.o ${LIBS}
-
-syslog.o: syslog.c
- ${CC} ${CFLAGS} ${SYSLOG_FLAGS} -c $(VPATH)syslog.c
-
-klogd.o: klogd.c klogd.h
- ${CC} ${CFLAGS} ${KLOGD_FLAGS} ${FEATKLOGD} $(DEB) -c $(VPATH)klogd.c
-
-ksym.o: ksym.c klogd.h
- ${CC} ${CFLAGS} ${KLOGD_FLAGS} ${FEATKLOGD} -c $(VPATH)ksym.c
-
-ksym_mod.o: ksym_mod.c klogd.h
- ${CC} ${CFLAGS} ${KLOGD_FLAGS} ${FEATKLOGD} -c $(VPATH)ksym_mod.c
-
-clean:
- rm -f *.o *.log *~ *.orig syslogd rfc3195d
-
-clobber: clean
- rm -f syslogd ksym syslog_tst oops_test TAGS tsyslogd tklogd
-
-install_exec: syslogd rfc3195d
- ${INSTALL} -b klogd ${DESTDIR}${BINDIR}/rklogd
- ${INSTALL} -b syslogd ${DESTDIR}${BINDIR}/rsyslogd
- ${INSTALL} -b rfc3195d ${DESTDIR}${BINDIR}/rfc3195d
-
-install_man:
- ${INSTALL} -m 644 $(VPATH)rfc3195d.8 ${DESTDIR}${MANDIR}/man8/rfc3195d.8
- ${INSTALL} -m 644 $(VPATH)rsyslogd.8 ${DESTDIR}${MANDIR}/man8/rsyslogd.8
- ${INSTALL} -m 644 $(VPATH)rklogd.8 ${DESTDIR}${MANDIR}/man8/rklogd.8
- ${INSTALL} -m 644 $(VPATH)rsyslog.conf.5 ${DESTDIR}${MANDIR}/man5/rsyslog.conf.5
-
-# The following lines are some legacy from sysklogd, which we might need
-# again in the future. So it is just commented out for now, eventually
-# to be revived. rgerhards 2005-08-09
-
-#syslog_tst: syslog_tst.o
-# ${CC} ${LDFLAGS} -o syslog_tst syslog_tst.o
-
-#tsyslogd: syslogd.c syslogd.h version.h template.o outchannel.o stringbuf.o srUtils.o
-# $(CC) $(CFLAGS) -g -DTESTING $(SYSLOGD_FLAGS) -o tsyslogd syslogd.c pidfile.o template.o outchannel.o stringbuf.o srUtils.o $(LIBS)
-#syslog_tst.o: syslog_tst.c
-# ${CC} ${CFLAGS} -c syslog_tst.c
-
diff --git a/redhat/Makefile b/redhat/Makefile
deleted file mode 100644
index 7ee2460..0000000
--- a/redhat/Makefile
+++ /dev/null
@@ -1 +0,0 @@
-include ../linux/Makefile
diff --git a/slackware/Makefile b/slackware/Makefile
deleted file mode 100644
index 7ee2460..0000000
--- a/slackware/Makefile
+++ /dev/null
@@ -1 +0,0 @@
-include ../linux/Makefile
diff --git a/solaris/Makefile b/solaris/Makefile
deleted file mode 100644
index 57b75d3..0000000
--- a/solaris/Makefile
+++ /dev/null
@@ -1,116 +0,0 @@
-# Makefile for rsyslog
-# Copyright (C) 2004-2007 Rainer Gerhards and Adiscon GmbH
-# This is the Solaris part of the Makefile.
-# For details, see http://www.rsyslog.com/doc
-#
-# C A U T I O N
-# So far, I have just make sure that rsyslog compiles under
-# Solaris. I have NOT used the RFC 3195 options, but that
-# should work, too, as liblogging cleanly compiles under
-# Solaris. I have done only very limited testing. From that,
-# it *seems* to work, but Solaris support is still experimental.
-# IT IS KNOWN THAT THE LOCAL LOG SOCKET SEEMS **NOT** TO WORK.
-# This seems to be related to using a different interface for
-# /dev/log than Linux and BSD. I am evaluating this problem,
-# but for the time being rsyslogd seems to be unable to act
-# as a local logger. But you can run it alongside the Solaris
-# stock syslogd.
-#
-# I will only look into this issue if people show up that
-# ask for local logging under Solaris. So please speak up
-# if you would like to see it!
-#
-
-#############################################################
-# USER SETTINGS #
-# ------------- #
-# The following lines allow you to customize the way #
-# rsyslog is build. All variables take a value of 0 or zero #
-# with 1 meaning true and 0 meaning false (in most cases #
-# equivalent to "disabled"). If you need to customize any- #
-# thing do it here - and stay away from all other parts #
-# of this file! #
-# #
-# IMPORTANT: after you have made changes, run "make clean" #
-# before any other command! #
-#############################################################
-
-# Enable large file support (typically on, not needed for
-# 64 bit operating systems)
-FEATURE_LARGEFILE=1
-
-# Enable database support (off by default, must be turned
-# on when support for MySQL is desired).
-FEATURE_DB=0
-
-# Enable regular expressions
-FEATURE_REGEXP=1
-
-# Enable RFC 3195 support (REQUIRES LIBLOGGING 0.6.0 or above!)
-FEATURE_RFC3195=0
-
-# Enable multithreading via pthreads (experimental!)
-FEATURE_PTHREADS=1
-
-# Enable debug mode (much slower code)
-FEATURE_DEBUG=1
-
-# The following defines tell us where liblogging is located. This
-# is only needed if we build with RFC 3195 support. By default,
-# liblogging is expected to be present in the our parent directory.
-#
-# THESE PATHES MUST ONLY BE SET IF RSYSLOG IS BUILD WITH
-# RFC 3195 SUPPORT!
-LIBLOGGING_INC=-I../../liblogging/src
-LIBLOGGING_BIN=../../liblogging/src/linux/liblogging.a
-
-#############################################################
-# END OF USER SETTINGS #
-# -------------------- #
-# DO NOT MAKE ANY MODIFICATIONS BELOW THIS POINT! #
-#############################################################
-
-INSTALL = install
-BINDIR = /usr/sbin
-MANDIR = /usr/share/man
-
-# now comes the evaluation of the FEATURE_* settings
-ifeq ($(strip $(FEATURE_LARGEFILE)), 0)
- NOLARGEFILE = -DNOLARGEFILE
-endif
-
-ifeq ($(strip $(FEATURE_DB)), 1)
- WITHDB=-DWITH_DB
-endif
-
-ifeq ($(strip $(FEATURE_REGEXP)), 1)
- F_REGEXP=-DFEATURE_REGEXP
-endif
-
-ifeq ($(strip $(FEATURE_PTHREADS)), 1)
- F_PTHREADS=-DUSE_PTHREADS
- LPTHREAD=-lpthread
-endif
-
-ifeq ($(strip $(FEATURE_RFC3195)), 1)
- F_RFC3195=-DFEATURE_RFC3195
-else
- LIBLOGGING_INC=
- LIBLOGGING_BIN=
-endif
-
-ifeq ($(strip $(FEATURE_DEBUG)), 0)
- DBG=-DNDEBUG
-endif
-
-# Include MySQL client lib if DB is selected
-ifdef WITHDB
-LIBS = -lmysqlclient -L/usr/local/lib/mysql
-endif
-
-# we use gcc under Solaris (mostly because that was the easiest for me ;))
-CC=gcc
-EXTRALIB=-lsocket -lnsl
-
-VPATH = ../
-include ../master.make