summaryrefslogtreecommitdiffstats
path: root/drivers/pci/pci.c
Commit message (Collapse)AuthorAgeFilesLines
* PCI: Ensure we re-enable devices on resumeMatthew Garrett2010-05-121-5/+1
| | | | | | | | | | | | | | | | | | | commit cc2893b6af5265baa1d68b17b136cffca9e40cfa upstream. If the firmware puts a device back into D0 state at resume time, we'll update its state in resume_noirq and thus skip the platform resume code. Calling that code twice should be safe and we ought to avoid getting to that point anyway, so remove the check and also allow the platform pci code to be called for D0. Fixes USB not being powered after resume on recent Lenovo machines. Acked-by: Alex Chiang <achiang@canonical.com> Acked-by: Rafael J. Wysocki <rjw@sisk.pl> Signed-off-by: Matthew Garrett <mjg@redhat.com> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* PCI: kill off pci_register_set_vga_state() symbol export.Paul Mundt2010-04-261-1/+0
| | | | | | | | | | | | | | | commit ded1d8f29b4d315a2093cafc3ee17ac870a87972 upstream. When pci_register_set_vga_state() was made __init, the EXPORT_SYMBOL() was retained, which now leaves us with a section mismatch. Signed-off-by: Paul Mundt <lethal@linux-sh.org> Cc: Mike Travis <travis@sgi.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org> Cc: maximilian attems <max@stro.at> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* pci: Update pci_set_vga_state() to call arch functionsMike Travis2010-04-261-1/+24
| | | | | | | | | | | | | | | | | | | | | | commit 95a8b6efc5d07103583f706c8a5889437d537939 upstream. Update pci_set_vga_state to call arch dependent functions to enable Legacy VGA I/O transactions to be redirected to correct target. [akpm@linux-foundation.org: make pci_register_set_vga_state() __init] Signed-off-by: Mike Travis <travis@sgi.com> LKML-Reference: <201002022238.o12McE1J018723@imap1.linux-foundation.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Robin Holt <holt@sgi.com> Cc: Jack Steiner <steiner@sgi.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Jesse Barnes <jbarnes@virtuousgeek.org> Cc: David Airlie <airlied@linux.ie> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: H. Peter Anvin <hpa@zytor.com> Cc: maximilian attems <max@stro.at> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* PCI: cleanup error return for pcix get and set mmrbc functionsDean Nelson2010-04-011-20/+16
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | commit 7c9e2b1c4784c6e574f69dbd904b2822f2e04d6e upstream. pcix_get_mmrbc() returns the maximum memory read byte count (mmrbc), if successful, or an appropriate error value, if not. Distinguishing errors from correct values and understanding the meaning of an error can be somewhat confusing in that: correct values: 512, 1024, 2048, 4096 errors: -EINVAL -22 PCIBIOS_FUNC_NOT_SUPPORTED 0x81 PCIBIOS_BAD_VENDOR_ID 0x83 PCIBIOS_DEVICE_NOT_FOUND 0x86 PCIBIOS_BAD_REGISTER_NUMBER 0x87 PCIBIOS_SET_FAILED 0x88 PCIBIOS_BUFFER_TOO_SMALL 0x89 The PCIBIOS_ errors are returned from the PCI functions generated by the PCI_OP_READ() and PCI_OP_WRITE() macros. In a similar manner, pcix_set_mmrbc() also returns the PCIBIOS_ error values returned from pci_read_config_[word|dword]() and pci_write_config_word(). Following pcix_get_max_mmrbc()'s example, the following patch simply returns -EINVAL for all PCIBIOS_ errors encountered by pcix_get_mmrbc(), and -EINVAL or -EIO for those encountered by pcix_set_mmrbc(). This simplification was chosen in light of the fact that none of the current callers of these functions are interested in the specific type of error encountered. In the future, should this change, one could simply create a function that maps each PCIBIOS_ error to a corresponding unique errno value, which could be called by pcix_get_max_mmrbc(), pcix_get_mmrbc(), and pcix_set_mmrbc(). Additionally, this patch eliminates some unnecessary variables. Signed-off-by: Dean Nelson <dnelson@redhat.com> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* PCI: fix access of PCI_X_CMD by pcix get and set mmrbc functionsDean Nelson2010-04-011-5/+6
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | commit bdc2bda7c4dd253026cc1fce45fc939304749029 upstream. An e1000 driver on a system with a PCI-X bus was always being returned a value of 135 from both pcix_get_mmrbc() and pcix_set_mmrbc(). This value reflects an error return of PCIBIOS_BAD_REGISTER_NUMBER from pci_bus_read_config_dword(,, cap + PCI_X_CMD,). This is because for a dword, the following portion of the PCI_OP_READ() macro: if (PCI_##size##_BAD) return PCIBIOS_BAD_REGISTER_NUMBER; expands to: if (pos & 3) return PCIBIOS_BAD_REGISTER_NUMBER; And is always true for 'cap + PCI_X_CMD', which is 0xe4 + 2 = 0xe6. ('cap' is the result of calling pci_find_capability(, PCI_CAP_ID_PCIX).) The same problem exists for pci_bus_write_config_dword(,, cap + PCI_X_CMD,). In both cases, instead of calling _dword(), _word() should be called. Signed-off-by: Dean Nelson <dnelson@redhat.com> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* PCI: fix return value from pcix_get_max_mmrbc()Dean Nelson2010-04-011-1/+1
| | | | | | | | | | | | | | | | | | | | | | | commit 25daeb550b69e89aff59bc6a84218a12b5203531 upstream. For the PCI_X_STATUS register, pcix_get_max_mmrbc() is returning an incorrect value, which is based on: (stat & PCI_X_STATUS_MAX_READ) >> 12 Valid return values are 512, 1024, 2048, 4096, which correspond to a 'stat' (masked and right shifted by 21) of 0, 1, 2, 3, respectively. A right shift by 11 would generate the correct return value when 'stat' (masked and right shifted by 21) has a value of 1 or 2. But for a value of 0 or 3 it's not possible to generate the correct return value by only right shifting. Fix is based on pcix_get_mmrbc()'s similar dealings with the PCI_X_CMD register. Signed-off-by: Dean Nelson <dnelson@redhat.com> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* PCI/PM: Use per-device D3 delaysRafael J. Wysocki2010-01-041-4/+15
| | | | | | | | | | | | | | | | | | | | | | | | It turns out that some PCI devices require extra delays when changing power state from D3 to D0 (and the other way around). Although this is against the PCI specification, we can handle it quite easily by allowing drivers to define arbitrary D3 delays for devices known to require extra time for switching power states. Introduce additional field d3_delay in struct pci_dev and use it to store the value of the device's D0->D3 delay, in miliseconds. Make the PCI PM core code use the per-device d3_delay unless pci_pm_d3_delay is greater (in which case the latter is used). [This also allows the driver to specify d3_delay shorter than the 10 ms required by the PCI standard if the device is known to be able to handle that.] Make the sky2 driver set d3_delay to 150 for devices handled by it. Fixes http://bugzilla.kernel.org/show_bug.cgi?id=14730 which is a listed regression from 2.6.30. Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
* PCI: Fix build if quirks are not enabledRafael J. Wysocki2009-12-311-15/+0
| | | | | | | | | | | | | After commit b9c3b266411d27f1a6466c19d146d08db576bfea ("PCI: support device-specific reset methods") the kernel build is broken if CONFIG_PCI_QUIRKS is unset. Fix this by moving pci_dev_specific_reset() to drivers/pci/quirks.c and providing an empty replacement for !CONFIG_PCI_QUIRKS builds. Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl> Reported-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* PCI/cardbus: Add a fixup hook and fix powerpcBenjamin Herrenschmidt2009-12-161-0/+5
| | | | | | | | | | | | | | | | | | | | | The cardbus code creates PCI devices without ever going through the necessary fixup bits and pieces that normal PCI devices go through. There's in fact a commented out call to pcibios_fixup_bus() in there, it's commented because ... it doesn't work. I could make pcibios_fixup_bus() do the right thing on powerpc easily but I felt it cleaner instead to provide a specific hook pci_fixup_cardbus for which a weak empty implementation is provided by the PCI core. This fixes cardbus on powerbooks and probably all other PowerPC platforms which was broken completely for ever on some platforms and since 2.6.31 on others such as PowerBooks when we made the DMA ops mandatory (since those are setup by the fixups). Acked-by: Dominik Brodowski <linux@dominikbrodowski.net> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
* PCI: change PCI nomenclature in drivers/pci/ (comment changes)Stefan Assmann2009-12-161-3/+3
| | | | | | | | | | | Changing occurrences of variants of PCI-X and PCIe to the PCI-SIG terms listed in the "Trademark and Logo Usage Guidelines". http://www.pcisig.com/developers/procedures/logos/Trademark_and_Logo_Usage_Guidelines_updated_112206.pdf Patch is limited to drivers/pci/ and changes concern comments only. Signed-off-by: Stefan Assmann <sassmann@redhat.com> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
* PCI: support device-specific reset methodsDexuan Cui2009-12-161-0/+19
| | | | | | | | | | Add a new type of quirk for resetting devices at pci_dev_reset time. This is necessary to handle device with nonstandard reset procedures, especially useful for guest drivers. Signed-off-by: Yu Zhao <yu.zhao@intel.com> Signed-off-by: Dexuan Cui <dexuan.cui@intel.com> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
* PCI: fix coding style issue in pci_save_state()Kleber Sacilotto de Souza2009-12-041-1/+1
| | | | | | | Remove a stray space in pci_save_state(). Signed-off-by: Kleber Sacilotto de Souza <klebers@linux.vnet.ibm.com> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
* PCI: add pci_request_acsChris Wright2009-12-041-0/+13
| | | | | | | | | | | | | | | | | | | | Commit ae21ee65e8bc228416bbcc8a1da01c56a847a60c "PCI: acs p2p upsteram forwarding enabling" doesn't actually enable ACS. Add a function to pci core to allow an IOMMU to request that ACS be enabled. The existing mechanism of using iommu_found() in the pci core to know when ACS should be enabled doesn't actually work due to initialization order; iommu has only been detected not initialized. Have Intel and AMD IOMMUs request ACS, and Xen does as well during early init of dom0. Cc: Allen Kay <allen.m.kay@intel.com> Cc: David Woodhouse <dwmw2@infradead.org> Cc: Jeremy Fitzhardinge <jeremy@goop.org> Cc: Joerg Roedel <joerg.roedel@amd.com> Signed-off-by: Chris Wright <chrisw@sous-sol.org> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
* PCI: read-modify-write the pcie device control register when initiating pcie flrShmulik Ravid2009-12-041-3/+5
| | | | | | | | | | | | The pcie_flr routine writes the device control register with the FLR bit set clearing all other fields for the FLR duration. Among other fields, the Max_Payload_Size is also cleared which can cause errors if there are transactions lurking in the HW pipeline. The patch replaces the blank write with read-modify-write of the control register keeping the other fields intact. Signed-off-by: Shmulik Ravid <shmulikr@broadcom.com> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
* PCI: add debug output for DMA mask infoYinghai Lu2009-12-041-0/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This allows us to find out what DMA mask is used for each PCI device at boot time; useful for debugging. After the patch: ehci_hcd 0000:00:02.1: using 31bit consistent DMA mask e1000 0000:0b:01.0: using 64bit DMA mask e1000 0000:0b:01.0: using 64bit consistent DMA mask e1000e 0000:04:00.0: using 64bit DMA mask e1000e 0000:04:00.0: using 64bit consistent DMA mask ixgb 0000:0c:01.0: using 64bit DMA mask ixgb 0000:0c:01.0: using 64bit consistent DMA mask aacraid 0000:86:00.0: using 32bit DMA mask aacraid 0000:86:00.0: using 32bit consistent DMA mask aacraid 0000:86:00.0: using 64bit DMA mask aacraid 0000:86:00.0: using 64bit consistent DMA mask qla2xxx 0000:0c:02.0: using 64bit consistent DMA mask qla2xxx 0000:0c:02.1: using 64bit consistent DMA mask lpfc 0000:06:00.0: using 64bit DMA mask lpfc 0000:06:00.1: using 64bit DMA mask pata_amd 0000:00:06.0: using 32bit DMA mask pata_amd 0000:00:06.0: using 32bit consistent DMA mask mptsas 0000:0c:04.0: using 64bit DMA mask mptsas 0000:0c:04.0: using 64bit consistent DMA mask forcedeth 0000:00:08.0: using 39bit DMA mask forcedeth 0000:00:08.0: using 39bit consistent DMA mask niu 0000:02:00.0: using 44bit DMA mask niu 0000:02:00.0: using 44bit consistent DMA mask sata_nv 0000:00:05.0: using 32bit DMA mask sata_nv 0000:00:05.0: using 32bit consistent DMA mask ib_mthca 0000:03:00.0: using 64bit DMA mask ib_mthca 0000:03:00.0: using 64bit consistent DMA mask Reviewed-by: Grant Grundler <grundler@google.com> Signed-off-by: Yinghai Lu <yinghai@kernel.org> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
* PCI: use pci_is_pcie() in pci coreKenji Kaneshige2009-11-241-3/+3
| | | | | | | | Change for PCI core to use pci_is_pcie() instead of checking pci_dev->is_pcie. Signed-off-by: Kenji Kaneshige <kaneshige.kenji@jp.fujitsu.com> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
* PCI: use pci_pcie_cap() in pci coreKenji Kaneshige2009-11-241-6/+6
| | | | | | | | | Use pcie_cap() instead of pci_find_capability() to get PCIe capability offset in PCI core code. This avoids unnecessary search in PCI configuration space. Signed-off-by: Kenji Kaneshige <kaneshige.kenji@jp.fujitsu.com> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
* PCI: allow matching of prefetchable resources to non-prefetchable windowsLinus Torvalds2009-11-111-2/+6
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | I'm not entirely sure it needs to go into 32, but it's probably the right thing to do. Another way of explaining the patch is: - we currently pick the _first_ exactly matching bus resource entry, but the _last_ inexactly matching one. Normally first/last shouldn't matter, but bus resource entries aren't actually all created equal: in a transparent bus, the last resources will be the parent resources, which we should generally try to avoid unless we have no choice. So "first matching" is the thing we should always aim for. - the patch is a bit bigger than it needs to be, because I simplified the logic at the same time. It used to be a fairly incomprehensible if ((res->flags & IORESOURCE_PREFETCH) && !(r->flags & IORESOURCE_PREFETCH)) best = r; /* Approximating prefetchable by non-prefetchable */ and technically, all the patch did was to make that complex choice be even more complex (it basically added a "&& !best" to say that if we already gound a non-prefetchable window for the prefetchable resource, then we won't override an earlier one with that later one: remember "first matching"). - So instead of that complex one with three separate conditionals in one, I split it up a bit, and am taking advantage of the fact that we already handled the exact case, so if 'res->flags' has the PREFETCH bit, then we already know that 'r->flags' will _not_ have it. So the simplified code drops the redundant test, and does the new '!best' test separately. It also uses 'continue' as a way to ignore the bus resource we know doesn't work (ie a prefetchable bus resource is _not_ acceptable for anything but an exact match), so it turns into: /* We can't insert a non-prefetch resource inside a prefetchable parent .. */ if (r->flags & IORESOURCE_PREFETCH) continue; /* .. but we can put a prefetchable resource inside a non-prefetchable one */ if (!best) best = r; instead. With the comments, it's now six lines instead of two, but it's conceptually simpler, and I _could_ have written it as two lines: if ((res->flags & IORESOURCE_PREFETCH) && !best) best = r; /* Approximating prefetchable by non-prefetchable */ but I thought that was too damn subtle. Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
* PCI: Replace old style lock initializerThomas Gleixner2009-11-061-1/+1
| | | | | | | | | SPIN_LOCK_UNLOCKED is deprecated. Use DEFINE_SPINLOCK instead. Make the lock static while at it. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
* PCI: improve discovery/configuration messagesBjorn Helgaas2009-11-041-1/+1
| | | | | | | | | | | This makes PCI resource management messages more consistent and adds a few new messages to aid debugging. Whenever we assign resources to a device, update a BAR, or change a bridge aperture, it's worth noting it. Signed-off-by: Bjorn Helgaas <bjorn.helgaas@hp.com> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
* PCI: make PME# messages KERN_DEBUGBjorn Helgaas2009-11-041-2/+3
| | | | | | | | Messages about PME# being supported and enabled/disabled are probably useful for debug, but maybe don't need to be on the console. Signed-off-by: Bjorn Helgaas <bjorn.helgaas@hp.com> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
* vsprintf: use %pR, %pr instead of %pRt, %pRfBjorn Helgaas2009-11-041-1/+1
| | | | | | | | | | | | | | | | | Jesse accidentally applied v1 [1] of the patchset instead of v2 [2]. This is the diff between v1 and v2. The changes in this patch are: - tidied vsprintf stack buffer to shrink and compute size more accurately - use %pR for decoding and %pr for "raw" (with type and flags) instead of adding %pRt and %pRf [1] http://lkml.org/lkml/2009/10/6/491 [2] http://lkml.org/lkml/2009/10/13/441 Signed-off-by: Bjorn Helgaas <bjorn.helgaas@hp.com> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
* PCI: acs p2p upsteram forwarding enablingAllen Kay2009-11-041-0/+35
| | | | | | | | | | | | | | | | | | | | | | | | | | | | Note: dom0 checking in v4 has been separated out into 2/2. This patch enables P2P upstream forwarding in ACS capable PCIe switches. It solves two potential problems in virtualization environment where a PCIe device is assigned to a guest domain using a HW iommu such as VT-d: 1) Unintentional failure caused by guest physical address programmed into the device's DMA that happens to match the memory address range of other downstream ports in the same PCIe switch. This causes the PCI transaction to go to the matching downstream port instead of go to the root complex to get translated by VT-d as it should be. 2) Malicious guest software intentionally attacks another downstream PCIe device by programming the DMA address into the assigned device that matches memory address range of the downstream PCIe port. We are in process of implementing device filtering software in KVM/XEN management software to allow device assignment of PCIe devices behind a PCIe switch only if it has ACS capability and with the P2P upstream forwarding bits enabled. This patch is intended to work for both KVM and Xen environments. Signed-off-by: Allen Kay <allen.m.kay@intel.com> Reviewed-by: Mathew Wilcox <willy@linux.intel.com> Reviewed-by: Chris Wright <chris@sous-sol.org> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
* PCI: print resources consistently with %pRtBjorn Helgaas2009-11-041-3/+1
| | | | | | | | This uses %pRt to print additional resource information (type, size, prefetchability, etc.) consistently. Signed-off-by: Bjorn Helgaas <bjorn.helgaas@hp.com> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
* PCI: pci_dfl_cache_line_size is __devinitdataTejun Heo2009-11-041-1/+1
| | | | | | | | | | pci_dfl_cache_line_size is marked as __initdata but referenced by pci_init() which is __devinit. Make it __devinitdata instead of __initdata. Signed-off-by: Tejun Heo <tj@kernel.org> Reported-by: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
* pccard: configure CLS on attachTejun Heo2009-11-041-20/+20
| | | | | | | | | | | | | | | | | | | | | | | For non hotplug PCI devices, the system firmware usually configures CLS correctly. For pccard devices system firmware can't do it and Linux PCI layer doesn't do it either. Unfortunately this leads to poor performance for certain devices (sata_sil). Unless MWI, which requires separate configuration, is to be used, CLS doesn't affect correctness, so the configuration should be harmless. This patch makes pci_set_cacheline_size() always built and export it and make pccard call it during attach. Please note that some other PCI hotplug drivers (shpchp and pciehp) also configure CLS on hotplug. Signed-off-by: Tejun Heo <tj@kernel.org> Cc: Daniel Ritz <daniel.ritz@gmx.ch> Cc: Dominik Brodowski <linux@dominikbrodowski.net> Cc: Greg KH <greg@kroah.com> Cc: Kenji Kaneshige <kaneshige.kenji@jp.fujitsu.com> Cc: Axel Birndt <towerlexa@gmx.de> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
* sparc64/PCI: drop PCI_CACHE_LINE_BYTESTejun Heo2009-11-041-5/+1
| | | | | | | | | | sparc64 is now the only user of PCI_CACHE_LINE_BYTES. Drop it and set pci_dfl_cache_line_size from pcibios_init() instead and drop PCI_CACHE_LINE_BYTES handling from generic pci code. Orignally-From: David Miller <davem@davemloft.net> Signed-off-by: Tejun Heo <tj@kernel.org> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
* PCI: determine CLS more intelligentlyJesse Barnes2009-11-041-8/+13
| | | | | | | | | | | | | | | | | | | | | | | | | | | | Till now, CLS has been determined either by arch code or as L1_CACHE_BYTES. Only x86 and ia64 set CLS explicitly and x86 doesn't always get it right. On most configurations, the chance is that firmware configures the correct value during boot. This patch makes pci_init() determine CLS by looking at what firmware has configured. It scans all devices and if all non-zero values agree, the value is used. If none is configured or there is a disagreement, pci_dfl_cache_line_size is used. arch can set the dfl value (via PCI_CACHE_LINE_BYTES or pci_dfl_cache_line_size) or override the actual one. ia64, x86 and sparc64 updated to set the default cls instead of the actual one. While at it, declare pci_cache_line_size and pci_dfl_cache_line_size in pci.h and drop private declarations from arch code. Signed-off-by: Tejun Heo <tj@kernel.org> Acked-by: David Miller <davem@davemloft.net> Acked-by: Greg KH <gregkh@suse.de> Cc: Ingo Molnar <mingo@elte.hu> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Tony Luck <tony.luck@intel.com> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
* Merge git://git.infradead.org/~dwmw2/iommu-2.6.32Linus Torvalds2009-10-131-13/+0
|\ | | | | | | | | | | | | | | | | | | | | * git://git.infradead.org/~dwmw2/iommu-2.6.32: x86: Move pci_iommu_init to rootfs_initcall() Run pci_apply_final_quirks() sooner. Mark pci_apply_final_quirks() __init rather than __devinit Rename pci_init() to pci_apply_final_quirks(), move it to quirks.c intel-iommu: Yet another BIOS workaround: Isoch DMAR unit with no TLB space intel-iommu: Decode (and ignore) RHSA entries intel-iommu: Make "Unknown DMAR structure" message more informative
| * Rename pci_init() to pci_apply_final_quirks(), move it to quirks.cDavid Woodhouse2009-10-121-13/+0
| | | | | | | | | | | | | | | | This function may have done more in the past, but all it does now is apply the PCI_FIXUP_FINAL quirks. So name it sensibly and put it where it belongs. Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
* | PCI: pci.c: fix kernel-doc notationRandy Dunlap2009-10-071-4/+4
| | | | | | | | | | | | | | Fix kernel-doc notation (& warnings) in pci/pci.c. Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
* | PCI PM: Read device power state from register after updating itRafael J. Wysocki2009-10-061-1/+5
|/ | | | | | | | | | | | | | | | | | | | | | | After attempting to change the power state of a PCI device pci_raw_set_power_state() doesn't check if the value it wrote into the device's PCI_PM_CTRL register has been stored in there, but unconditionally modifies the device's current_state field to reflect the change. This may cause problems to happen if the power state of the device hasn't been changed in fact, because it will make the PCI PM core make a wrong assumption. To prevent such situations from happening modify pci_raw_set_power_state() so that it reads the device's PCI_PM_CTRL register after writing into it and uses the value read from the register to update the device's current_state field. Also make it print a message saying that the device refused to change its power state as requested (returning an error code in such cases would cause suspend regressions to appear on some systems, where device drivers' suspend routines return error codes if pci_set_power_state() fails). Reviewed-by: Alex Chiang <achiang@hp.com> Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
* PCI: Clear saved_state after the state has been restoredRafael J. Wysocki2009-09-141-0/+3
| | | | | | | | | | | | | | | | Some PCI devices fail if their standard configuration registers are restored twice in a row. Prevent this from happening by making pci_restore_state() clear the saved_state flag of the device right after the device's standard configuration registers have been populated with the previously saved values. Simplify PCI PM callbacks by removing the direct clearing of state_saved from them, as it shouldn't be necessary any more (except in pci_pm_thaw(), where it has to be cleared, so that the values saved during the "freeze" phase of hibernation are not used later by mistake). Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
* PCI PM: Introduce device flag wakeup_preparedRafael J. Wysocki2009-09-091-0/+8
| | | | | | | | | | Introduce a new PCI device flag, wakeup_prepared, to prevent PCI wake-up preparation code from being executed twice in a row for the same device and for the same purpose. Reviewed-by: Matthew Garrett <mjg59@srcf.ucam.org> Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
* PCI PM: Simplify PCI wake-up codeRafael J. Wysocki2009-09-091-11/+14
| | | | | | | | | Rework the PCI wake-up code so that it's easier to read without changing the functionality. Reviewed-by: Matthew Garrett <mjg59@srcf.ucam.org> Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
* PCI: pcie: Ensure hotplug ports have a minimum number of resourcesEric W. Biederman2009-09-091-0/+10
| | | | | | | | | | | | | | | | | | | In general a BIOS may goof or we may hotplug in a hotplug controller. In either case the kernel needs to reserve resources for plugging in more devices in the future instead of creating a minimal resource assignment. We already do this for cardbus bridges I am just adding a variant for pcie bridges. v2: Make testing for pcie hotplug bridges based on a flag. So far we only set the flag for pcie but a header_quirk could easily be added for the non-standard pci hotplug bridges. Signed-off-by: Eric W. Biederman <ebiederm@aristanetworks.com> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
* PCI/GPU: implement VGA arbitration on LinuxBenjamin Herrenschmidt2009-09-091-0/+44
| | | | | | | | | | | | | | | | | | | | | | | Background: Graphic devices are accessed through ranges in I/O or memory space. While most modern devices allow relocation of such ranges, some "Legacy" VGA devices implemented on PCI will typically have the same "hard-decoded" addresses as they did on ISA. For more details see "PCI Bus Binding to IEEE Std 1275-1994 Standard for Boot (Initialization Configuration) Firmware Revision 2.1" Section 7, Legacy Devices. The Resource Access Control (RAC) module inside the X server currently does the task of arbitration when more than one legacy device co-exists on the same machine. But the problem happens when these devices are trying to be accessed by different userspace clients (e.g. two server in parallel). Their address assignments conflict. Therefore an arbitration scheme _outside_ of the X server is needed to control the sharing of these resources. This document introduces the operation of the VGA arbiter implemented for Linux kernel. Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Tiago Vignatti <tiago.vignatti@nokia.com> Signed-off-by: Dave Airlie <airlied@redhat.com> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
* PCI: expose function reset capability in sysfsMichael S. Tsirkin2009-09-091-0/+16
| | | | | | | | | | | | | | Some devices allow an individual function to be reset without affecting other functions in the same device: that's what pci_reset_function does. For devices that have this support, expose reset attribite in sysfs. This is useful e.g. for virtualization, where a qemu userspace process wants to reset the device when the guest is reset, to emulate machine reboot as closely as possible. Acked-by: Greg Kroah-Hartman <gregkh@suse.de> Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
* PCI: check saved state before restoreAlek Du2009-08-201-0/+2
| | | | | | | | | | | | | Without the check, the config space may be filled with zeros. Though the driver should try to avoid call restoring before saving, but the pci layer also should check this. Also removes the existing check in pci_restore_standard_config, since it's superfluous with the new check in restore_state. Acked-by: Rafael J. Wysocki <rjw@sisk.pl> Signed-off-by: Alek Du <alek.du@intel.com> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
* PCI: Fix IRQ swizzling for ARI-enabled devicesMatthew Wilcox2009-07-011-2/+11
| | | | | | | | | | | | For many purposes, including interrupt-swizzling, devices with ARI enabled behave as if they have one device (number 0) and 256 functions. This probably hasn't bitten us in practice because all ARI devices I've seen are also IOV devices, and IOV devices are required to use MSI. This isn't guaranteed, and there are legitimate reasons to use ARI without IOV, and hence potentially use pin-based interrupts. Signed-off-by: Matthew Wilcox <willy@linux.intel.com> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
* PCI: check if bus has a proper bridge device before triggering SBRYu Zhao2009-06-291-1/+1
| | | | | | | | | | For devices attached to the root bus, we can't trigger Secondary Bus Reset because there is no bridge device associated with the bus. So need to check bus->self again NULL first before using it. Reviewed-by: Kenji Kaneshige <kaneshige.kenji@jp.fujitsu.com> Signed-off-by: Yu Zhao <yu.zhao@intel.com> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
* Merge branch 'linux-next' of ↵Linus Torvalds2009-06-221-88/+158
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/jbarnes/pci-2.6 * 'linux-next' of git://git.kernel.org/pub/scm/linux/kernel/git/jbarnes/pci-2.6: (74 commits) PCI: make msi_free_irqs() to use msix_mask_irq() instead of open coded write PCI: Fix the NIU MSI-X problem in a better way PCI ASPM: remove get_root_port_link PCI ASPM: cleanup pcie_aspm_sanity_check PCI ASPM: remove has_switch field PCI ASPM: cleanup calc_Lx_latency PCI ASPM: cleanup pcie_aspm_get_cap_device PCI ASPM: cleanup clkpm checks PCI ASPM: cleanup __pcie_aspm_check_state_one PCI ASPM: cleanup initialization PCI ASPM: cleanup change input argument of aspm functions PCI ASPM: cleanup misc in struct pcie_link_state PCI ASPM: cleanup clkpm state in struct pcie_link_state PCI ASPM: cleanup latency field in struct pcie_link_state PCI ASPM: cleanup aspm state field in struct pcie_link_state PCI ASPM: fix typo in struct pcie_link_state PCI: drivers/pci/slot.c should depend on CONFIG_SYSFS PCI: remove redundant __msi_set_enable() PCI PM: consistently use type bool for wake enable variable x86/ACPI: Correct maximum allowed _CRS returned resources and warn if exceeded ...
| * PCI PM: consistently use type bool for wake enable variableFrans Pop2009-06-161-1/+1
| | | | | | | | | | | | | | Other functions use type bool, so use that for pci_enable_wake as well. Signed-off-by: Frans Pop <elendil@planet.nl> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
| * PCI PM: Fix handling of devices without PM support by pci_target_state()Rafael J. Wysocki2009-06-161-3/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | If a PCI device is not power-manageable either by the platform, or with the help of the native PCI PM interface, pci_target_state() will return either PCI_D3hot, or PCI_POWER_ERROR for it, depending on whether or not the device is configured to wake up the system. Alas, none of these return values is correct, because each of them causes pci_prepare_to_sleep() to return error code, although it should complete successfully in such a case. Fix this problem by making pci_target_state() always return PCI_D0 for devices that cannot be power managed. Cc: stable@kernel.org Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
| * PCI: support Secondary Bus ResetYu Zhao2009-06-161-0/+31
| | | | | | | | | | | | | | | | | | | | | | | | PCI-to-PCI Bridge 1.2 specifies that the Secondary Bus Reset bit can force the assertion of RST# on the secondary interface, which can be used to reset all devices including subordinates under this bus. This can be used to reset a function if this function is the only device under this bus. Reviewed-by: Kenji Kaneshige <kaneshige.kenji@jp.fujitsu.com> Signed-off-by: Yu Zhao <yu.zhao@intel.com> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
| * PCI: support PM D0hot->D3 transition resetYu Zhao2009-06-161-0/+34
| | | | | | | | | | | | | | | | | | | | | | PCI PM 1.2 specifies that the device will perform an internal reset upon transitioning from D3hot to D0 when the NO_SOFT_RESET bit is clear. This method can be used to reset a function if neither PCIe FLR nor PCI AF FLR are supported. Reviewed-by: Kenji Kaneshige <kaneshige.kenji@jp.fujitsu.com> Signed-off-by: Yu Zhao <yu.zhao@intel.com> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
| * PCI: cleanup Function Level ResetYu Zhao2009-06-161-82/+84
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch enhances the FLR functions: 1) remove disable_irq() so the shared IRQ won't be disabled. 2) replace the 1s wait with 100, 200 and 400ms wait intervals for the Pending Transaction. 3) replace mdelay() with msleep(). 4) add might_sleep(). 5) lock the device to prevent PM suspend from accessing the CSRs during the reset. 6) coding style fixes. Reviewed-by: Kenji Kaneshige <kaneshige.kenji@jp.fujitsu.com> Signed-off-by: Yu Zhao <yu.zhao@intel.com> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
| * PCI: use pci_is_root_bus() in pci_common_swizzle()Kenji Kaneshige2009-06-161-1/+1
| | | | | | | | | | | | | | | | | | | | Use pci_is_root_bus() in pci_common_swizzle() for checking if the pci bus is root, for code consistency. Reviewed-by: Alex Chiang <achiang@hp.com> Reviewed-by: Grant Grundler <grundler@parisc-linux.org> Signed-off-by: Kenji Kaneshige <kaneshige.kenji@jp.fujitsu.com> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
| * PCI: use pci_is_root_bus() in pci_get_interrupt_pin()Kenji Kaneshige2009-06-161-1/+1
| | | | | | | | | | | | | | | | | | | | Use pci_is_root_bus() in pci_get_interrupt_pin() for checking if the pci bus is root, for code consistency. Reviewed-by: Alex Chiang <achiang@hp.com> Reviewed-by: Grant Grundler <grundler@parisc-linux.org> Signed-off-by: Kenji Kaneshige <kaneshige.kenji@jp.fujitsu.com> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
| * PCI: Add support for turning PCIe ECRC on or offAndrew Patterson2009-06-111-0/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Adds support for PCI Express transaction layer end-to-end CRC checking (ECRC). This patch will enable/disable ECRC checking by setting/clearing the ECRC Check Enable and/or ECRC Generation Enable bits for devices that support ECRC. The ECRC setting is controlled by the "pci=ecrc=<policy>" command-line option. If this option is not set or is set to 'bios", the enable and generation bits are left in whatever state that firmware/BIOS set them to. The "off" setting turns them off, and the "on" option turns them on (if the device supports it). Turning ECRC on or off can be a data integrity versus performance tradeoff. In theory, turning it on will catch more data errors, turning it off means possibly better performance since CRC does not need to be calculated by the PCIe hardware and packet sizes are reduced. Signed-off-by: Andrew Patterson <andrew.patterson@hp.com> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
generated by cgit (git 2.34.1) at 2024-09-21 07:34:44 +0000