summaryrefslogtreecommitdiffstats
path: root/sound/soc/at32/at32-ssc.c
diff options
context:
space:
mode:
Diffstat (limited to 'sound/soc/at32/at32-ssc.c')
-rw-r--r--sound/soc/at32/at32-ssc.c849
1 files changed, 0 insertions, 849 deletions
diff --git a/sound/soc/at32/at32-ssc.c b/sound/soc/at32/at32-ssc.c
deleted file mode 100644
index 4ef6492c902..00000000000
--- a/sound/soc/at32/at32-ssc.c
+++ /dev/null
@@ -1,849 +0,0 @@
-/* sound/soc/at32/at32-ssc.c
- * ASoC platform driver for AT32 using SSC as DAI
- *
- * Copyright (C) 2008 Long Range Systems
- * Geoffrey Wossum <gwossum@acm.org>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- * Note that this is basically a port of the sound/soc/at91-ssc.c to
- * the AVR32 kernel. Thanks to Frank Mandarino for that code.
- */
-
-/* #define DEBUG */
-
-#include <linux/init.h>
-#include <linux/module.h>
-#include <linux/interrupt.h>
-#include <linux/device.h>
-#include <linux/delay.h>
-#include <linux/clk.h>
-#include <linux/io.h>
-#include <linux/atmel_pdc.h>
-#include <linux/atmel-ssc.h>
-
-#include <sound/core.h>
-#include <sound/pcm.h>
-#include <sound/pcm_params.h>
-#include <sound/initval.h>
-#include <sound/soc.h>
-
-#include "at32-pcm.h"
-#include "at32-ssc.h"
-
-
-
-/*-------------------------------------------------------------------------*\
- * Constants
-\*-------------------------------------------------------------------------*/
-#define NUM_SSC_DEVICES 3
-
-/*
- * SSC direction masks
- */
-#define SSC_DIR_MASK_UNUSED 0
-#define SSC_DIR_MASK_PLAYBACK 1
-#define SSC_DIR_MASK_CAPTURE 2
-
-/*
- * SSC register values that Atmel left out of <linux/atmel-ssc.h>. These
- * are expected to be used with SSC_BF
- */
-/* START bit field values */
-#define SSC_START_CONTINUOUS 0
-#define SSC_START_TX_RX 1
-#define SSC_START_LOW_RF 2
-#define SSC_START_HIGH_RF 3
-#define SSC_START_FALLING_RF 4
-#define SSC_START_RISING_RF 5
-#define SSC_START_LEVEL_RF 6
-#define SSC_START_EDGE_RF 7
-#define SSS_START_COMPARE_0 8
-
-/* CKI bit field values */
-#define SSC_CKI_FALLING 0
-#define SSC_CKI_RISING 1
-
-/* CKO bit field values */
-#define SSC_CKO_NONE 0
-#define SSC_CKO_CONTINUOUS 1
-#define SSC_CKO_TRANSFER 2
-
-/* CKS bit field values */
-#define SSC_CKS_DIV 0
-#define SSC_CKS_CLOCK 1
-#define SSC_CKS_PIN 2
-
-/* FSEDGE bit field values */
-#define SSC_FSEDGE_POSITIVE 0
-#define SSC_FSEDGE_NEGATIVE 1
-
-/* FSOS bit field values */
-#define SSC_FSOS_NONE 0
-#define SSC_FSOS_NEGATIVE 1
-#define SSC_FSOS_POSITIVE 2
-#define SSC_FSOS_LOW 3
-#define SSC_FSOS_HIGH 4
-#define SSC_FSOS_TOGGLE 5
-
-#define START_DELAY 1
-
-
-
-/*-------------------------------------------------------------------------*\
- * Module data
-\*-------------------------------------------------------------------------*/
-/*
- * SSC PDC registered required by the PCM DMA engine
- */
-static struct at32_pdc_regs pdc_tx_reg = {
- .xpr = SSC_PDC_TPR,
- .xcr = SSC_PDC_TCR,
- .xnpr = SSC_PDC_TNPR,
- .xncr = SSC_PDC_TNCR,
-};
-
-
-
-static struct at32_pdc_regs pdc_rx_reg = {
- .xpr = SSC_PDC_RPR,
- .xcr = SSC_PDC_RCR,
- .xnpr = SSC_PDC_RNPR,
- .xncr = SSC_PDC_RNCR,
-};
-
-
-
-/*
- * SSC and PDC status bits for transmit and receive
- */
-static struct at32_ssc_mask ssc_tx_mask = {
- .ssc_enable = SSC_BIT(CR_TXEN),
- .ssc_disable = SSC_BIT(CR_TXDIS),
- .ssc_endx = SSC_BIT(SR_ENDTX),
- .ssc_endbuf = SSC_BIT(SR_TXBUFE),
- .pdc_enable = SSC_BIT(PDC_PTCR_TXTEN),
- .pdc_disable = SSC_BIT(PDC_PTCR_TXTDIS),
-};
-
-
-
-static struct at32_ssc_mask ssc_rx_mask = {
- .ssc_enable = SSC_BIT(CR_RXEN),
- .ssc_disable = SSC_BIT(CR_RXDIS),
- .ssc_endx = SSC_BIT(SR_ENDRX),
- .ssc_endbuf = SSC_BIT(SR_RXBUFF),
- .pdc_enable = SSC_BIT(PDC_PTCR_RXTEN),
- .pdc_disable = SSC_BIT(PDC_PTCR_RXTDIS),
-};
-
-
-
-/*
- * DMA parameters for each SSC
- */
-static struct at32_pcm_dma_params ssc_dma_params[NUM_SSC_DEVICES][2] = {
- {
- {
- .name = "SSC0 PCM out",
- .pdc = &pdc_tx_reg,
- .mask = &ssc_tx_mask,
- },
- {
- .name = "SSC0 PCM in",
- .pdc = &pdc_rx_reg,
- .mask = &ssc_rx_mask,
- },
- },
- {
- {
- .name = "SSC1 PCM out",
- .pdc = &pdc_tx_reg,
- .mask = &ssc_tx_mask,
- },
- {
- .name = "SSC1 PCM in",
- .pdc = &pdc_rx_reg,
- .mask = &ssc_rx_mask,
- },
- },
- {
- {
- .name = "SSC2 PCM out",
- .pdc = &pdc_tx_reg,
- .mask = &ssc_tx_mask,
- },
- {
- .name = "SSC2 PCM in",
- .pdc = &pdc_rx_reg,
- .mask = &ssc_rx_mask,
- },
- },
-};
-
-
-
-static struct at32_ssc_info ssc_info[NUM_SSC_DEVICES] = {
- {
- .name = "ssc0",
- .lock = __SPIN_LOCK_UNLOCKED(ssc_info[0].lock),
- .dir_mask = SSC_DIR_MASK_UNUSED,
- .initialized = 0,
- },
- {
- .name = "ssc1",
- .lock = __SPIN_LOCK_UNLOCKED(ssc_info[1].lock),
- .dir_mask = SSC_DIR_MASK_UNUSED,
- .initialized = 0,
- },
- {
- .name = "ssc2",
- .lock = __SPIN_LOCK_UNLOCKED(ssc_info[2].lock),
- .dir_mask = SSC_DIR_MASK_UNUSED,
- .initialized = 0,
- },
-};
-
-
-
-
-/*-------------------------------------------------------------------------*\
- * ISR
-\*-------------------------------------------------------------------------*/
-/*
- * SSC interrupt handler. Passes PDC interrupts to the DMA interrupt
- * handler in the PCM driver.
- */
-static irqreturn_t at32_ssc_interrupt(int irq, void *dev_id)
-{
- struct at32_ssc_info *ssc_p = dev_id;
- struct at32_pcm_dma_params *dma_params;
- u32 ssc_sr;
- u32 ssc_substream_mask;
- int i;
-
- ssc_sr = (ssc_readl(ssc_p->ssc->regs, SR) &
- ssc_readl(ssc_p->ssc->regs, IMR));
-
- /*
- * Loop through substreams attached to this SSC. If a DMA-related
- * interrupt occured on that substream, call the DMA interrupt
- * handler function, if one has been registered in the dma_param
- * structure by the PCM driver.
- */
- for (i = 0; i < ARRAY_SIZE(ssc_p->dma_params); i++) {
- dma_params = ssc_p->dma_params[i];
-
- if ((dma_params != NULL) &&
- (dma_params->dma_intr_handler != NULL)) {
- ssc_substream_mask = (dma_params->mask->ssc_endx |
- dma_params->mask->ssc_endbuf);
- if (ssc_sr & ssc_substream_mask) {
- dma_params->dma_intr_handler(ssc_sr,
- dma_params->
- substream);
- }
- }
- }
-
-
- return IRQ_HANDLED;
-}
-
-/*-------------------------------------------------------------------------*\
- * DAI functions
-\*-------------------------------------------------------------------------*/
-/*
- * Startup. Only that one substream allowed in each direction.
- */
-static int at32_ssc_startup(struct snd_pcm_substream *substream)
-{
- struct snd_soc_pcm_runtime *rtd = substream->private_data;
- struct at32_ssc_info *ssc_p = &ssc_info[rtd->dai->cpu_dai->id];
- int dir_mask;
-
- dir_mask = ((substream->stream == SNDRV_PCM_STREAM_PLAYBACK) ?
- SSC_DIR_MASK_PLAYBACK : SSC_DIR_MASK_CAPTURE);
-
- spin_lock_irq(&ssc_p->lock);
- if (ssc_p->dir_mask & dir_mask) {
- spin_unlock_irq(&ssc_p->lock);
- return -EBUSY;
- }
- ssc_p->dir_mask |= dir_mask;
- spin_unlock_irq(&ssc_p->lock);
-
- return 0;
-}
-
-
-
-/*
- * Shutdown. Clear DMA parameters and shutdown the SSC if there
- * are no other substreams open.
- */
-static void at32_ssc_shutdown(struct snd_pcm_substream *substream)
-{
- struct snd_soc_pcm_runtime *rtd = substream->private_data;
- struct at32_ssc_info *ssc_p = &ssc_info[rtd->dai->cpu_dai->id];
- struct at32_pcm_dma_params *dma_params;
- int dir_mask;
-
- dma_params = ssc_p->dma_params[substream->stream];
-
- if (dma_params != NULL) {
- ssc_writel(dma_params->ssc->regs, CR,
- dma_params->mask->ssc_disable);
- pr_debug("%s disabled SSC_SR=0x%08x\n",
- (substream->stream ? "receiver" : "transmit"),
- ssc_readl(ssc_p->ssc->regs, SR));
-
- dma_params->ssc = NULL;
- dma_params->substream = NULL;
- ssc_p->dma_params[substream->stream] = NULL;
- }
-
-
- dir_mask = 1 << substream->stream;
- spin_lock_irq(&ssc_p->lock);
- ssc_p->dir_mask &= ~dir_mask;
- if (!ssc_p->dir_mask) {
- /* Shutdown the SSC clock */
- pr_debug("at32-ssc: Stopping user %d clock\n",
- ssc_p->ssc->user);
- clk_disable(ssc_p->ssc->clk);
-
- if (ssc_p->initialized) {
- free_irq(ssc_p->ssc->irq, ssc_p);
- ssc_p->initialized = 0;
- }
-
- /* Reset the SSC */
- ssc_writel(ssc_p->ssc->regs, CR, SSC_BIT(CR_SWRST));
-
- /* clear the SSC dividers */
- ssc_p->cmr_div = 0;
- ssc_p->tcmr_period = 0;
- ssc_p->rcmr_period = 0;
- }
- spin_unlock_irq(&ssc_p->lock);
-}
-
-
-
-/*
- * Set the SSC system clock rate
- */
-static int at32_ssc_set_dai_sysclk(struct snd_soc_dai *cpu_dai,
- int clk_id, unsigned int freq, int dir)
-{
- /* TODO: What the heck do I do here? */
- return 0;
-}
-
-
-
-/*
- * Record DAI format for use by hw_params()
- */
-static int at32_ssc_set_dai_fmt(struct snd_soc_dai *cpu_dai,
- unsigned int fmt)
-{
- struct at32_ssc_info *ssc_p = &ssc_info[cpu_dai->id];
-
- ssc_p->daifmt = fmt;
- return 0;
-}
-
-
-
-/*
- * Record SSC clock dividers for use in hw_params()
- */
-static int at32_ssc_set_dai_clkdiv(struct snd_soc_dai *cpu_dai,
- int div_id, int div)
-{
- struct at32_ssc_info *ssc_p = &ssc_info[cpu_dai->id];
-
- switch (div_id) {
- case AT32_SSC_CMR_DIV:
- /*
- * The same master clock divider is used for both
- * transmit and receive, so if a value has already
- * been set, it must match this value
- */
- if (ssc_p->cmr_div == 0)
- ssc_p->cmr_div = div;
- else if (div != ssc_p->cmr_div)
- return -EBUSY;
- break;
-
- case AT32_SSC_TCMR_PERIOD:
- ssc_p->tcmr_period = div;
- break;
-
- case AT32_SSC_RCMR_PERIOD:
- ssc_p->rcmr_period = div;
- break;
-
- default:
- return -EINVAL;
- }
-
- return 0;
-}
-
-
-
-/*
- * Configure the SSC
- */
-static int at32_ssc_hw_params(struct snd_pcm_substream *substream,
- struct snd_pcm_hw_params *params)
-{
- struct snd_soc_pcm_runtime *rtd = substream->private_data;
- int id = rtd->dai->cpu_dai->id;
- struct at32_ssc_info *ssc_p = &ssc_info[id];
- struct at32_pcm_dma_params *dma_params;
- int channels, bits;
- u32 tfmr, rfmr, tcmr, rcmr;
- int start_event;
- int ret;
-
-
- /*
- * Currently, there is only one set of dma_params for each direction.
- * If more are added, this code will have to be changed to select
- * the proper set
- */
- dma_params = &ssc_dma_params[id][substream->stream];
- dma_params->ssc = ssc_p->ssc;
- dma_params->substream = substream;
-
- ssc_p->dma_params[substream->stream] = dma_params;
-
-
- /*
- * The cpu_dai->dma_data field is only used to communicate the
- * appropriate DMA parameters to the PCM driver's hw_params()
- * function. It should not be used for other purposes as it
- * is common to all substreams.
- */
- rtd->dai->cpu_dai->dma_data = dma_params;
-
- channels = params_channels(params);
-
-
- /*
- * Determine sample size in bits and the PDC increment
- */
- switch (params_format(params)) {
- case SNDRV_PCM_FORMAT_S8:
- bits = 8;
- dma_params->pdc_xfer_size = 1;
- break;
-
- case SNDRV_PCM_FORMAT_S16:
- bits = 16;
- dma_params->pdc_xfer_size = 2;
- break;
-
- case SNDRV_PCM_FORMAT_S24:
- bits = 24;
- dma_params->pdc_xfer_size = 4;
- break;
-
- case SNDRV_PCM_FORMAT_S32:
- bits = 32;
- dma_params->pdc_xfer_size = 4;
- break;
-
- default:
- pr_warning("at32-ssc: Unsupported PCM format %d",
- params_format(params));
- return -EINVAL;
- }
- pr_debug("at32-ssc: bits = %d, pdc_xfer_size = %d, channels = %d\n",
- bits, dma_params->pdc_xfer_size, channels);
-
-
- /*
- * The SSC only supports up to 16-bit samples in I2S format, due
- * to the size of the Frame Mode Register FSLEN field.
- */
- if ((ssc_p->daifmt & SND_SOC_DAIFMT_FORMAT_MASK) == SND_SOC_DAIFMT_I2S)
- if (bits > 16) {
- pr_warning("at32-ssc: "
- "sample size %d is too large for I2S\n",
- bits);
- return -EINVAL;
- }
-
-
- /*
- * Compute the SSC register settings
- */
- switch (ssc_p->daifmt & (SND_SOC_DAIFMT_FORMAT_MASK |
- SND_SOC_DAIFMT_MASTER_MASK)) {
- case SND_SOC_DAIFMT_I2S | SND_SOC_DAIFMT_CBS_CFS:
- /*
- * I2S format, SSC provides BCLK and LRS clocks.
- *
- * The SSC transmit and receive clocks are generated from the
- * MCK divider, and the BCLK signal is output on the SSC TK line
- */
- pr_debug("at32-ssc: SSC mode is I2S BCLK / FRAME master\n");
- rcmr = (SSC_BF(RCMR_PERIOD, ssc_p->rcmr_period) |
- SSC_BF(RCMR_STTDLY, START_DELAY) |
- SSC_BF(RCMR_START, SSC_START_FALLING_RF) |
- SSC_BF(RCMR_CKI, SSC_CKI_RISING) |
- SSC_BF(RCMR_CKO, SSC_CKO_NONE) |
- SSC_BF(RCMR_CKS, SSC_CKS_DIV));
-
- rfmr = (SSC_BF(RFMR_FSEDGE, SSC_FSEDGE_POSITIVE) |
- SSC_BF(RFMR_FSOS, SSC_FSOS_NEGATIVE) |
- SSC_BF(RFMR_FSLEN, bits - 1) |
- SSC_BF(RFMR_DATNB, channels - 1) |
- SSC_BIT(RFMR_MSBF) | SSC_BF(RFMR_DATLEN, bits - 1));
-
- tcmr = (SSC_BF(TCMR_PERIOD, ssc_p->tcmr_period) |
- SSC_BF(TCMR_STTDLY, START_DELAY) |
- SSC_BF(TCMR_START, SSC_START_FALLING_RF) |
- SSC_BF(TCMR_CKI, SSC_CKI_FALLING) |
- SSC_BF(TCMR_CKO, SSC_CKO_CONTINUOUS) |
- SSC_BF(TCMR_CKS, SSC_CKS_DIV));
-
- tfmr = (SSC_BF(TFMR_FSEDGE, SSC_FSEDGE_POSITIVE) |
- SSC_BF(TFMR_FSOS, SSC_FSOS_NEGATIVE) |
- SSC_BF(TFMR_FSLEN, bits - 1) |
- SSC_BF(TFMR_DATNB, channels - 1) | SSC_BIT(TFMR_MSBF) |
- SSC_BF(TFMR_DATLEN, bits - 1));
- break;
-
-
- case SND_SOC_DAIFMT_I2S | SND_SOC_DAIFMT_CBM_CFM:
- /*
- * I2S format, CODEC supplies BCLK and LRC clock.
- *
- * The SSC transmit clock is obtained from the BCLK signal
- * on the TK line, and the SSC receive clock is generated from
- * the transmit clock.
- *
- * For single channel data, one sample is transferred on the
- * falling edge of the LRC clock. For two channel data, one
- * sample is transferred on both edges of the LRC clock.
- */
- pr_debug("at32-ssc: SSC mode is I2S BCLK / FRAME slave\n");
- start_event = ((channels == 1) ?
- SSC_START_FALLING_RF : SSC_START_EDGE_RF);
-
- rcmr = (SSC_BF(RCMR_STTDLY, START_DELAY) |
- SSC_BF(RCMR_START, start_event) |
- SSC_BF(RCMR_CKI, SSC_CKI_RISING) |
- SSC_BF(RCMR_CKO, SSC_CKO_NONE) |
- SSC_BF(RCMR_CKS, SSC_CKS_CLOCK));
-
- rfmr = (SSC_BF(RFMR_FSEDGE, SSC_FSEDGE_POSITIVE) |
- SSC_BF(RFMR_FSOS, SSC_FSOS_NONE) |
- SSC_BIT(RFMR_MSBF) | SSC_BF(RFMR_DATLEN, bits - 1));
-
- tcmr = (SSC_BF(TCMR_STTDLY, START_DELAY) |
- SSC_BF(TCMR_START, start_event) |
- SSC_BF(TCMR_CKI, SSC_CKI_FALLING) |
- SSC_BF(TCMR_CKO, SSC_CKO_NONE) |
- SSC_BF(TCMR_CKS, SSC_CKS_PIN));
-
- tfmr = (SSC_BF(TFMR_FSEDGE, SSC_FSEDGE_POSITIVE) |
- SSC_BF(TFMR_FSOS, SSC_FSOS_NONE) |
- SSC_BIT(TFMR_MSBF) | SSC_BF(TFMR_DATLEN, bits - 1));
- break;
-
-
- case SND_SOC_DAIFMT_DSP_A | SND_SOC_DAIFMT_CBS_CFS:
- /*
- * DSP/PCM Mode A format, SSC provides BCLK and LRC clocks.
- *
- * The SSC transmit and receive clocks are generated from the
- * MCK divider, and the BCLK signal is output on the SSC TK line
- */
- pr_debug("at32-ssc: SSC mode is DSP A BCLK / FRAME master\n");
- rcmr = (SSC_BF(RCMR_PERIOD, ssc_p->rcmr_period) |
- SSC_BF(RCMR_STTDLY, 1) |
- SSC_BF(RCMR_START, SSC_START_RISING_RF) |
- SSC_BF(RCMR_CKI, SSC_CKI_RISING) |
- SSC_BF(RCMR_CKO, SSC_CKO_NONE) |
- SSC_BF(RCMR_CKS, SSC_CKS_DIV));
-
- rfmr = (SSC_BF(RFMR_FSEDGE, SSC_FSEDGE_POSITIVE) |
- SSC_BF(RFMR_FSOS, SSC_FSOS_POSITIVE) |
- SSC_BF(RFMR_DATNB, channels - 1) |
- SSC_BIT(RFMR_MSBF) | SSC_BF(RFMR_DATLEN, bits - 1));
-
- tcmr = (SSC_BF(TCMR_PERIOD, ssc_p->tcmr_period) |
- SSC_BF(TCMR_STTDLY, 1) |
- SSC_BF(TCMR_START, SSC_START_RISING_RF) |
- SSC_BF(TCMR_CKI, SSC_CKI_RISING) |
- SSC_BF(TCMR_CKO, SSC_CKO_CONTINUOUS) |
- SSC_BF(TCMR_CKS, SSC_CKS_DIV));
-
- tfmr = (SSC_BF(TFMR_FSEDGE, SSC_FSEDGE_POSITIVE) |
- SSC_BF(TFMR_FSOS, SSC_FSOS_POSITIVE) |
- SSC_BF(TFMR_DATNB, channels - 1) |
- SSC_BIT(TFMR_MSBF) | SSC_BF(TFMR_DATLEN, bits - 1));
- break;
-
-
- case SND_SOC_DAIFMT_DSP_A | SND_SOC_DAIFMT_CBM_CFM:
- default:
- pr_warning("at32-ssc: unsupported DAI format 0x%x\n",
- ssc_p->daifmt);
- return -EINVAL;
- break;
- }
- pr_debug("at32-ssc: RCMR=%08x RFMR=%08x TCMR=%08x TFMR=%08x\n",
- rcmr, rfmr, tcmr, tfmr);
-
-
- if (!ssc_p->initialized) {
- /* enable peripheral clock */
- pr_debug("at32-ssc: Starting clock\n");
- clk_enable(ssc_p->ssc->clk);
-
- /* Reset the SSC and its PDC registers */
- ssc_writel(ssc_p->ssc->regs, CR, SSC_BIT(CR_SWRST));
-
- ssc_writel(ssc_p->ssc->regs, PDC_RPR, 0);
- ssc_writel(ssc_p->ssc->regs, PDC_RCR, 0);
- ssc_writel(ssc_p->ssc->regs, PDC_RNPR, 0);
- ssc_writel(ssc_p->ssc->regs, PDC_RNCR, 0);
-
- ssc_writel(ssc_p->ssc->regs, PDC_TPR, 0);
- ssc_writel(ssc_p->ssc->regs, PDC_TCR, 0);
- ssc_writel(ssc_p->ssc->regs, PDC_TNPR, 0);
- ssc_writel(ssc_p->ssc->regs, PDC_TNCR, 0);
-
- ret = request_irq(ssc_p->ssc->irq, at32_ssc_interrupt, 0,
- ssc_p->name, ssc_p);
- if (ret < 0) {
- pr_warning("at32-ssc: request irq failed (%d)\n", ret);
- pr_debug("at32-ssc: Stopping clock\n");
- clk_disable(ssc_p->ssc->clk);
- return ret;
- }
-
- ssc_p->initialized = 1;
- }
-
- /* Set SSC clock mode register */
- ssc_writel(ssc_p->ssc->regs, CMR, ssc_p->cmr_div);
-
- /* set receive clock mode and format */
- ssc_writel(ssc_p->ssc->regs, RCMR, rcmr);
- ssc_writel(ssc_p->ssc->regs, RFMR, rfmr);
-
- /* set transmit clock mode and format */
- ssc_writel(ssc_p->ssc->regs, TCMR, tcmr);
- ssc_writel(ssc_p->ssc->regs, TFMR, tfmr);
-
- pr_debug("at32-ssc: SSC initialized\n");
- return 0;
-}
-
-
-
-static int at32_ssc_prepare(struct snd_pcm_substream *substream)
-{
- struct snd_soc_pcm_runtime *rtd = substream->private_data;
- struct at32_ssc_info *ssc_p = &ssc_info[rtd->dai->cpu_dai->id];
- struct at32_pcm_dma_params *dma_params;
-
- dma_params = ssc_p->dma_params[substream->stream];
-
- ssc_writel(dma_params->ssc->regs, CR, dma_params->mask->ssc_enable);
-
- return 0;
-}
-
-
-
-#ifdef CONFIG_PM
-static int at32_ssc_suspend(struct platform_device *pdev,
- struct snd_soc_dai *cpu_dai)
-{
- struct at32_ssc_info *ssc_p;
-
- if (!cpu_dai->active)
- return 0;
-
- ssc_p = &ssc_info[cpu_dai->id];
-
- /* Save the status register before disabling transmit and receive */
- ssc_p->ssc_state.ssc_sr = ssc_readl(ssc_p->ssc->regs, SR);
- ssc_writel(ssc_p->ssc->regs, CR, SSC_BIT(CR_TXDIS) | SSC_BIT(CR_RXDIS));
-
- /* Save the current interrupt mask, then disable unmasked interrupts */
- ssc_p->ssc_state.ssc_imr = ssc_readl(ssc_p->ssc->regs, IMR);
- ssc_writel(ssc_p->ssc->regs, IDR, ssc_p->ssc_state.ssc_imr);
-
- ssc_p->ssc_state.ssc_cmr = ssc_readl(ssc_p->ssc->regs, CMR);
- ssc_p->ssc_state.ssc_rcmr = ssc_readl(ssc_p->ssc->regs, RCMR);
- ssc_p->ssc_state.ssc_rfmr = ssc_readl(ssc_p->ssc->regs, RFMR);
- ssc_p->ssc_state.ssc_tcmr = ssc_readl(ssc_p->ssc->regs, TCMR);
- ssc_p->ssc_state.ssc_tfmr = ssc_readl(ssc_p->ssc->regs, TFMR);
-
- return 0;
-}
-
-
-
-static int at32_ssc_resume(struct platform_device *pdev,
- struct snd_soc_dai *cpu_dai)
-{
- struct at32_ssc_info *ssc_p;
- u32 cr;
-
- if (!cpu_dai->active)
- return 0;
-
- ssc_p = &ssc_info[cpu_dai->id];
-
- /* restore SSC register settings */
- ssc_writel(ssc_p->ssc->regs, TFMR, ssc_p->ssc_state.ssc_tfmr);
- ssc_writel(ssc_p->ssc->regs, TCMR, ssc_p->ssc_state.ssc_tcmr);
- ssc_writel(ssc_p->ssc->regs, RFMR, ssc_p->ssc_state.ssc_rfmr);
- ssc_writel(ssc_p->ssc->regs, RCMR, ssc_p->ssc_state.ssc_rcmr);
- ssc_writel(ssc_p->ssc->regs, CMR, ssc_p->ssc_state.ssc_cmr);
-
- /* re-enable interrupts */
- ssc_writel(ssc_p->ssc->regs, IER, ssc_p->ssc_state.ssc_imr);
-
- /* Re-enable recieve and transmit as appropriate */
- cr = 0;
- cr |=
- (ssc_p->ssc_state.ssc_sr & SSC_BIT(SR_RXEN)) ? SSC_BIT(CR_RXEN) : 0;
- cr |=
- (ssc_p->ssc_state.ssc_sr & SSC_BIT(SR_TXEN)) ? SSC_BIT(CR_TXEN) : 0;
- ssc_writel(ssc_p->ssc->regs, CR, cr);
-
- return 0;
-}
-#else /* CONFIG_PM */
-# define at32_ssc_suspend NULL
-# define at32_ssc_resume NULL
-#endif /* CONFIG_PM */
-
-
-#define AT32_SSC_RATES \
- (SNDRV_PCM_RATE_8000 | SNDRV_PCM_RATE_11025 | SNDRV_PCM_RATE_16000 | \
- SNDRV_PCM_RATE_22050 | SNDRV_PCM_RATE_32000 | SNDRV_PCM_RATE_44100 | \
- SNDRV_PCM_RATE_48000 | SNDRV_PCM_RATE_88200 | SNDRV_PCM_RATE_96000)
-
-
-#define AT32_SSC_FORMATS \
- (SNDRV_PCM_FMTBIT_S8 | SNDRV_PCM_FMTBIT_S16 | \
- SNDRV_PCM_FMTBIT_S24 | SNDRV_PCM_FMTBIT_S32)
-
-
-struct snd_soc_dai at32_ssc_dai[NUM_SSC_DEVICES] = {
- {
- .name = "at32-ssc0",
- .id = 0,
- .type = SND_SOC_DAI_PCM,
- .suspend = at32_ssc_suspend,
- .resume = at32_ssc_resume,
- .playback = {
- .channels_min = 1,
- .channels_max = 2,
- .rates = AT32_SSC_RATES,
- .formats = AT32_SSC_FORMATS,
- },
- .capture = {
- .channels_min = 1,
- .channels_max = 2,
- .rates = AT32_SSC_RATES,
- .formats = AT32_SSC_FORMATS,
- },
- .ops = {
- .startup = at32_ssc_startup,
- .shutdown = at32_ssc_shutdown,
- .prepare = at32_ssc_prepare,
- .hw_params = at32_ssc_hw_params,
- },
- .dai_ops = {
- .set_sysclk = at32_ssc_set_dai_sysclk,
- .set_fmt = at32_ssc_set_dai_fmt,
- .set_clkdiv = at32_ssc_set_dai_clkdiv,
- },
- .private_data = &ssc_info[0],
- },
- {
- .name = "at32-ssc1",
- .id = 1,
- .type = SND_SOC_DAI_PCM,
- .suspend = at32_ssc_suspend,
- .resume = at32_ssc_resume,
- .playback = {
- .channels_min = 1,
- .channels_max = 2,
- .rates = AT32_SSC_RATES,
- .formats = AT32_SSC_FORMATS,
- },
- .capture = {
- .channels_min = 1,
- .channels_max = 2,
- .rates = AT32_SSC_RATES,
- .formats = AT32_SSC_FORMATS,
- },
- .ops = {
- .startup = at32_ssc_startup,
- .shutdown = at32_ssc_shutdown,
- .prepare = at32_ssc_prepare,
- .hw_params = at32_ssc_hw_params,
- },
- .dai_ops = {
- .set_sysclk = at32_ssc_set_dai_sysclk,
- .set_fmt = at32_ssc_set_dai_fmt,
- .set_clkdiv = at32_ssc_set_dai_clkdiv,
- },
- .private_data = &ssc_info[1],
- },
- {
- .name = "at32-ssc2",
- .id = 2,
- .type = SND_SOC_DAI_PCM,
- .suspend = at32_ssc_suspend,
- .resume = at32_ssc_resume,
- .playback = {
- .channels_min = 1,
- .channels_max = 2,
- .rates = AT32_SSC_RATES,
- .formats = AT32_SSC_FORMATS,
- },
- .capture = {
- .channels_min = 1,
- .channels_max = 2,
- .rates = AT32_SSC_RATES,
- .formats = AT32_SSC_FORMATS,
- },
- .ops = {
- .startup = at32_ssc_startup,
- .shutdown = at32_ssc_shutdown,
- .prepare = at32_ssc_prepare,
- .hw_params = at32_ssc_hw_params,
- },
- .dai_ops = {
- .set_sysclk = at32_ssc_set_dai_sysclk,
- .set_fmt = at32_ssc_set_dai_fmt,
- .set_clkdiv = at32_ssc_set_dai_clkdiv,
- },
- .private_data = &ssc_info[2],
- },
-};
-EXPORT_SYMBOL_GPL(at32_ssc_dai);
-
-
-MODULE_AUTHOR("Geoffrey Wossum <gwossum@acm.org>");
-MODULE_DESCRIPTION("AT32 SSC ASoC Interface");
-MODULE_LICENSE("GPL");