summaryrefslogtreecommitdiffstats
path: root/include/asm-m68knommu/m5249sim.h
diff options
context:
space:
mode:
Diffstat (limited to 'include/asm-m68knommu/m5249sim.h')
-rw-r--r--include/asm-m68knommu/m5249sim.h209
1 files changed, 0 insertions, 209 deletions
diff --git a/include/asm-m68knommu/m5249sim.h b/include/asm-m68knommu/m5249sim.h
deleted file mode 100644
index 366eb8602d2..00000000000
--- a/include/asm-m68knommu/m5249sim.h
+++ /dev/null
@@ -1,209 +0,0 @@
-/****************************************************************************/
-
-/*
- * m5249sim.h -- ColdFire 5249 System Integration Module support.
- *
- * (C) Copyright 2002, Greg Ungerer (gerg@snapgear.com)
- */
-
-/****************************************************************************/
-#ifndef m5249sim_h
-#define m5249sim_h
-/****************************************************************************/
-
-/*
- * Define the 5249 SIM register set addresses.
- */
-#define MCFSIM_RSR 0x00 /* Reset Status reg (r/w) */
-#define MCFSIM_SYPCR 0x01 /* System Protection reg (r/w)*/
-#define MCFSIM_SWIVR 0x02 /* SW Watchdog intr reg (r/w) */
-#define MCFSIM_SWSR 0x03 /* SW Watchdog service (r/w) */
-#define MCFSIM_PAR 0x04 /* Pin Assignment reg (r/w) */
-#define MCFSIM_IRQPAR 0x06 /* Interrupt Assignment reg (r/w) */
-#define MCFSIM_MPARK 0x0C /* BUS Master Control Reg*/
-#define MCFSIM_IPR 0x40 /* Interrupt Pend reg (r/w) */
-#define MCFSIM_IMR 0x44 /* Interrupt Mask reg (r/w) */
-#define MCFSIM_AVR 0x4b /* Autovector Ctrl reg (r/w) */
-#define MCFSIM_ICR0 0x4c /* Intr Ctrl reg 0 (r/w) */
-#define MCFSIM_ICR1 0x4d /* Intr Ctrl reg 1 (r/w) */
-#define MCFSIM_ICR2 0x4e /* Intr Ctrl reg 2 (r/w) */
-#define MCFSIM_ICR3 0x4f /* Intr Ctrl reg 3 (r/w) */
-#define MCFSIM_ICR4 0x50 /* Intr Ctrl reg 4 (r/w) */
-#define MCFSIM_ICR5 0x51 /* Intr Ctrl reg 5 (r/w) */
-#define MCFSIM_ICR6 0x52 /* Intr Ctrl reg 6 (r/w) */
-#define MCFSIM_ICR7 0x53 /* Intr Ctrl reg 7 (r/w) */
-#define MCFSIM_ICR8 0x54 /* Intr Ctrl reg 8 (r/w) */
-#define MCFSIM_ICR9 0x55 /* Intr Ctrl reg 9 (r/w) */
-#define MCFSIM_ICR10 0x56 /* Intr Ctrl reg 10 (r/w) */
-#define MCFSIM_ICR11 0x57 /* Intr Ctrl reg 11 (r/w) */
-
-#define MCFSIM_CSAR0 0x80 /* CS 0 Address 0 reg (r/w) */
-#define MCFSIM_CSMR0 0x84 /* CS 0 Mask 0 reg (r/w) */
-#define MCFSIM_CSCR0 0x8a /* CS 0 Control reg (r/w) */
-#define MCFSIM_CSAR1 0x8c /* CS 1 Address reg (r/w) */
-#define MCFSIM_CSMR1 0x90 /* CS 1 Mask reg (r/w) */
-#define MCFSIM_CSCR1 0x96 /* CS 1 Control reg (r/w) */
-#define MCFSIM_CSAR2 0x98 /* CS 2 Address reg (r/w) */
-#define MCFSIM_CSMR2 0x9c /* CS 2 Mask reg (r/w) */
-#define MCFSIM_CSCR2 0xa2 /* CS 2 Control reg (r/w) */
-#define MCFSIM_CSAR3 0xa4 /* CS 3 Address reg (r/w) */
-#define MCFSIM_CSMR3 0xa8 /* CS 3 Mask reg (r/w) */
-#define MCFSIM_CSCR3 0xae /* CS 3 Control reg (r/w) */
-
-#define MCFSIM_DCR 0x100 /* DRAM Control reg (r/w) */
-#define MCFSIM_DACR0 0x108 /* DRAM 0 Addr and Ctrl (r/w) */
-#define MCFSIM_DMR0 0x10c /* DRAM 0 Mask reg (r/w) */
-#define MCFSIM_DACR1 0x110 /* DRAM 1 Addr and Ctrl (r/w) */
-#define MCFSIM_DMR1 0x114 /* DRAM 1 Mask reg (r/w) */
-
-
-/*
- * Some symbol defines for the above...
- */
-#define MCFSIM_SWDICR MCFSIM_ICR0 /* Watchdog timer ICR */
-#define MCFSIM_TIMER1ICR MCFSIM_ICR1 /* Timer 1 ICR */
-#define MCFSIM_TIMER2ICR MCFSIM_ICR2 /* Timer 2 ICR */
-#define MCFSIM_UART1ICR MCFSIM_ICR4 /* UART 1 ICR */
-#define MCFSIM_UART2ICR MCFSIM_ICR5 /* UART 2 ICR */
-#define MCFSIM_DMA0ICR MCFSIM_ICR6 /* DMA 0 ICR */
-#define MCFSIM_DMA1ICR MCFSIM_ICR7 /* DMA 1 ICR */
-#define MCFSIM_DMA2ICR MCFSIM_ICR8 /* DMA 2 ICR */
-#define MCFSIM_DMA3ICR MCFSIM_ICR9 /* DMA 3 ICR */
-
-/*
- * General purpose IO registers (in MBAR2).
- */
-#define MCFSIM2_GPIOREAD 0x0 /* GPIO read values */
-#define MCFSIM2_GPIOWRITE 0x4 /* GPIO write values */
-#define MCFSIM2_GPIOENABLE 0x8 /* GPIO enabled */
-#define MCFSIM2_GPIOFUNC 0xc /* GPIO function */
-#define MCFSIM2_GPIO1READ 0xb0 /* GPIO1 read values */
-#define MCFSIM2_GPIO1WRITE 0xb4 /* GPIO1 write values */
-#define MCFSIM2_GPIO1ENABLE 0xb8 /* GPIO1 enabled */
-#define MCFSIM2_GPIO1FUNC 0xbc /* GPIO1 function */
-
-#define MCFSIM2_GPIOINTSTAT 0xc0 /* GPIO interrupt status */
-#define MCFSIM2_GPIOINTCLEAR 0xc0 /* GPIO interrupt clear */
-#define MCFSIM2_GPIOINTENABLE 0xc4 /* GPIO interrupt enable */
-
-#define MCFSIM2_INTLEVEL1 0x140 /* Interrupt level reg 1 */
-#define MCFSIM2_INTLEVEL2 0x144 /* Interrupt level reg 2 */
-#define MCFSIM2_INTLEVEL3 0x148 /* Interrupt level reg 3 */
-#define MCFSIM2_INTLEVEL4 0x14c /* Interrupt level reg 4 */
-#define MCFSIM2_INTLEVEL5 0x150 /* Interrupt level reg 5 */
-#define MCFSIM2_INTLEVEL6 0x154 /* Interrupt level reg 6 */
-#define MCFSIM2_INTLEVEL7 0x158 /* Interrupt level reg 7 */
-#define MCFSIM2_INTLEVEL8 0x15c /* Interrupt level reg 8 */
-
-#define MCFSIM2_DMAROUTE 0x188 /* DMA routing */
-
-#define MCFSIM2_IDECONFIG1 0x18c /* IDEconfig1 */
-#define MCFSIM2_IDECONFIG2 0x190 /* IDEconfig2 */
-
-
-/*
- * Macro to set IMR register. It is 32 bits on the 5249.
- */
-#define MCFSIM_IMR_MASKALL 0x7fffe /* All SIM intr sources */
-
-#define mcf_getimr() \
- *((volatile unsigned long *) (MCF_MBAR + MCFSIM_IMR))
-
-#define mcf_setimr(imr) \
- *((volatile unsigned long *) (MCF_MBAR + MCFSIM_IMR)) = (imr);
-
-#define mcf_getipr() \
- *((volatile unsigned long *) (MCF_MBAR + MCFSIM_IPR))
-
-/****************************************************************************/
-
-#ifdef __ASSEMBLER__
-
-/*
- * The M5249C3 board needs a little help getting all its SIM devices
- * initialized at kernel start time. dBUG doesn't set much up, so
- * we need to do it manually.
- */
-.macro m5249c3_setup
- /*
- * Set MBAR1 and MBAR2, just incase they are not set.
- */
- movel #0x10000001,%a0
- movec %a0,%MBAR /* map MBAR region */
- subql #1,%a0 /* get MBAR address in a0 */
-
- movel #0x80000001,%a1
- movec %a1,#3086 /* map MBAR2 region */
- subql #1,%a1 /* get MBAR2 address in a1 */
-
- /*
- * Move secondary interrupts to base at 128.
- */
- moveb #0x80,%d0
- moveb %d0,0x16b(%a1) /* interrupt base register */
-
- /*
- * Work around broken CSMR0/DRAM vector problem.
- */
- movel #0x001F0021,%d0 /* disable C/I bit */
- movel %d0,0x84(%a0) /* set CSMR0 */
-
- /*
- * Disable the PLL firstly. (Who knows what state it is
- * in here!).
- */
- movel 0x180(%a1),%d0 /* get current PLL value */
- andl #0xfffffffe,%d0 /* PLL bypass first */
- movel %d0,0x180(%a1) /* set PLL register */
- nop
-
-#if CONFIG_CLOCK_FREQ == 140000000
- /*
- * Set initial clock frequency. This assumes M5249C3 board
- * is fitted with 11.2896MHz crystal. It will program the
- * PLL for 140MHz. Lets go fast :-)
- */
- movel #0x125a40f0,%d0 /* set for 140MHz */
- movel %d0,0x180(%a1) /* set PLL register */
- orl #0x1,%d0
- movel %d0,0x180(%a1) /* set PLL register */
-#endif
-
- /*
- * Setup CS1 for ethernet controller.
- * (Setup as per M5249C3 doco).
- */
- movel #0xe0000000,%d0 /* CS1 mapped at 0xe0000000 */
- movel %d0,0x8c(%a0)
- movel #0x001f0021,%d0 /* CS1 size of 1Mb */
- movel %d0,0x90(%a0)
- movew #0x0080,%d0 /* CS1 = 16bit port, AA */
- movew %d0,0x96(%a0)
-
- /*
- * Setup CS2 for IDE interface.
- */
- movel #0x50000000,%d0 /* CS2 mapped at 0x50000000 */
- movel %d0,0x98(%a0)
- movel #0x001f0001,%d0 /* CS2 size of 1MB */
- movel %d0,0x9c(%a0)
- movew #0x0080,%d0 /* CS2 = 16bit, TA */
- movew %d0,0xa2(%a0)
-
- movel #0x00107000,%d0 /* IDEconfig1 */
- movel %d0,0x18c(%a1)
- movel #0x000c0400,%d0 /* IDEconfig2 */
- movel %d0,0x190(%a1)
-
- movel #0x00080000,%d0 /* GPIO19, IDE reset bit */
- orl %d0,0xc(%a1) /* function GPIO19 */
- orl %d0,0x8(%a1) /* enable GPIO19 as output */
- orl %d0,0x4(%a1) /* de-assert IDE reset */
-.endm
-
-#define PLATFORM_SETUP m5249c3_setup
-
-#endif /* __ASSEMBLER__ */
-
-/****************************************************************************/
-#endif /* m5249sim_h */