diff options
Diffstat (limited to 'include/asm-arm/arch-at91rm9200/at91rm9200_udp.h')
| -rw-r--r-- | include/asm-arm/arch-at91rm9200/at91rm9200_udp.h | 77 |
1 files changed, 0 insertions, 77 deletions
diff --git a/include/asm-arm/arch-at91rm9200/at91rm9200_udp.h b/include/asm-arm/arch-at91rm9200/at91rm9200_udp.h deleted file mode 100644 index 951e3f61cef..00000000000 --- a/include/asm-arm/arch-at91rm9200/at91rm9200_udp.h +++ /dev/null @@ -1,77 +0,0 @@ -/* - * include/asm-arm/arch-at91rm9200/at91rm9200_udp.h - * - * Copyright (C) 2005 Ivan Kokshaysky - * Copyright (C) SAN People - * - * USB Device Port (UDP) registers. - * Based on AT91RM9200 datasheet revision E. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - */ - -#ifndef AT91RM9200_UDP_H -#define AT91RM9200_UDP_H - -#define AT91_UDP_FRM_NUM 0x00 /* Frame Number Register */ -#define AT91_UDP_NUM (0x7ff << 0) /* Frame Number */ -#define AT91_UDP_FRM_ERR (1 << 16) /* Frame Error */ -#define AT91_UDP_FRM_OK (1 << 17) /* Frame OK */ - -#define AT91_UDP_GLB_STAT 0x04 /* Global State Register */ -#define AT91_UDP_FADDEN (1 << 0) /* Function Address Enable */ -#define AT91_UDP_CONFG (1 << 1) /* Configured */ -#define AT91_UDP_ESR (1 << 2) /* Enable Send Resume */ -#define AT91_UDP_RSMINPR (1 << 3) /* Resume has been sent */ -#define AT91_UDP_RMWUPE (1 << 4) /* Remote Wake Up Enable */ - -#define AT91_UDP_FADDR 0x08 /* Function Address Register */ -#define AT91_UDP_FADD (0x7f << 0) /* Function Address Value */ -#define AT91_UDP_FEN (1 << 8) /* Function Enable */ - -#define AT91_UDP_IER 0x10 /* Interrupt Enable Register */ -#define AT91_UDP_IDR 0x14 /* Interrupt Disable Register */ -#define AT91_UDP_IMR 0x18 /* Interrupt Mask Register */ - -#define AT91_UDP_ISR 0x1c /* Interrupt Status Register */ -#define AT91_UDP_EP(n) (1 << (n)) /* Endpoint Interrupt Status */ -#define AT91_UDP_RXSUSP (1 << 8) /* USB Suspend Interrupt Status */ -#define AT91_UDP_RXRSM (1 << 9) /* USB Resume Interrupt Status */ -#define AT91_UDP_EXTRSM (1 << 10) /* External Resume Interrupt Status */ -#define AT91_UDP_SOFINT (1 << 11) /* Start of Frame Interrupt Status */ -#define AT91_UDP_ENDBUSRES (1 << 12) /* End of Bus Reset Interrpt Status */ -#define AT91_UDP_WAKEUP (1 << 13) /* USB Wakeup Interrupt Status */ - -#define AT91_UDP_ICR 0x20 /* Interrupt Clear Register */ -#define AT91_UDP_RST_EP 0x28 /* Reset Endpoint Register */ - -#define AT91_UDP_CSR(n) (0x30 + ((n) * 4)) /* Endpoint Control/Status Registers 0-7 */ -#define AT91_UDP_TXCOMP (1 << 0) /* Generates IN packet with data previously written in DPR */ -#define AT91_UDP_RX_DATA_BK0 (1 << 1) /* Receive Data Bank 0 */ -#define AT91_UDP_RXSETUP (1 << 2) /* Send STALL to the host */ -#define AT91_UDP_STALLSENT (1 << 3) /* Stall Sent / Isochronous error (Isochronous endpoints) */ -#define AT91_UDP_TXPKTRDY (1 << 4) /* Transmit Packet Ready */ -#define AT91_UDP_FORCESTALL (1 << 5) /* Force Stall */ -#define AT91_UDP_RX_DATA_BK1 (1 << 6) /* Receive Data Bank 1 */ -#define AT91_UDP_DIR (1 << 7) /* Transfer Direction */ -#define AT91_UDP_EPTYPE (7 << 8) /* Endpoint Type */ -#define AT91_UDP_EPTYPE_CTRL (0 << 8) -#define AT91_UDP_EPTYPE_ISO_OUT (1 << 8) -#define AT91_UDP_EPTYPE_BULK_OUT (2 << 8) -#define AT91_UDP_EPTYPE_INT_OUT (3 << 8) -#define AT91_UDP_EPTYPE_ISO_IN (5 << 8) -#define AT91_UDP_EPTYPE_BULK_IN (6 << 8) -#define AT91_UDP_EPTYPE_INT_IN (7 << 8) -#define AT91_UDP_DTGLE (1 << 11) /* Data Toggle */ -#define AT91_UDP_EPEDS (1 << 15) /* Endpoint Enable/Disable */ -#define AT91_UDP_RXBYTECNT (0x7ff << 16) /* Number of bytes in FIFO */ - -#define AT91_UDP_FDR(n) (0x50 + ((n) * 4)) /* Endpoint FIFO Data Registers 0-7 */ - -#define AT91_UDP_TXVC 0x74 /* Transceiver Control Register */ -#define AT91_UDP_TXVC_TXVDIS (1 << 8) /* Transceiver Disable */ - -#endif |