diff options
Diffstat (limited to 'drivers/usb')
149 files changed, 19894 insertions, 3945 deletions
diff --git a/drivers/usb/Kconfig b/drivers/usb/Kconfig index 00504319752..f9b1719b9a3 100644 --- a/drivers/usb/Kconfig +++ b/drivers/usb/Kconfig @@ -25,6 +25,7 @@ config USB_ARCH_HAS_OHCI default y if PXA27x default y if ARCH_EP93XX default y if (ARCH_AT91RM9200 || ARCH_AT91SAM9261) + default y if ARCH_PNX4008 # PPC: default y if STB03xxx default y if PPC_MPC52xx diff --git a/drivers/usb/Makefile b/drivers/usb/Makefile index 4710eb02ed6..97d57cfc343 100644 --- a/drivers/usb/Makefile +++ b/drivers/usb/Makefile @@ -14,6 +14,7 @@ obj-$(CONFIG_USB_ISP116X_HCD) += host/ obj-$(CONFIG_USB_OHCI_HCD) += host/ obj-$(CONFIG_USB_UHCI_HCD) += host/ obj-$(CONFIG_USB_SL811_HCD) += host/ +obj-$(CONFIG_USB_U132_HCD) += host/ obj-$(CONFIG_ETRAX_USB_HOST) += host/ obj-$(CONFIG_USB_OHCI_AT91) += host/ @@ -23,6 +24,7 @@ obj-$(CONFIG_USB_PRINTER) += class/ obj-$(CONFIG_USB_STORAGE) += storage/ obj-$(CONFIG_USB) += storage/ +obj-$(CONFIG_USB_ACECAD) += input/ obj-$(CONFIG_USB_AIPTEK) += input/ obj-$(CONFIG_USB_ATI_REMOTE) += input/ obj-$(CONFIG_USB_HID) += input/ @@ -31,8 +33,8 @@ obj-$(CONFIG_USB_KBTAB) += input/ obj-$(CONFIG_USB_MOUSE) += input/ obj-$(CONFIG_USB_MTOUCH) += input/ obj-$(CONFIG_USB_POWERMATE) += input/ +obj-$(CONFIG_USB_TRANCEVIBRATOR)+= input/ obj-$(CONFIG_USB_WACOM) += input/ -obj-$(CONFIG_USB_ACECAD) += input/ obj-$(CONFIG_USB_XPAD) += input/ obj-$(CONFIG_USB_CATC) += net/ @@ -47,22 +49,24 @@ obj-$(CONFIG_USB_MICROTEK) += image/ obj-$(CONFIG_USB_SERIAL) += serial/ +obj-$(CONFIG_USB_ADUTUX) += misc/ +obj-$(CONFIG_USB_APPLEDISPLAY) += misc/ obj-$(CONFIG_USB_AUERSWALD) += misc/ obj-$(CONFIG_USB_CYPRESS_CY7C63)+= misc/ obj-$(CONFIG_USB_CYTHERM) += misc/ obj-$(CONFIG_USB_EMI26) += misc/ obj-$(CONFIG_USB_EMI62) += misc/ +obj-$(CONFIG_USB_FTDI_ELAN) += misc/ obj-$(CONFIG_USB_IDMOUSE) += misc/ obj-$(CONFIG_USB_LCD) += misc/ obj-$(CONFIG_USB_LD) += misc/ obj-$(CONFIG_USB_LED) += misc/ obj-$(CONFIG_USB_LEGOTOWER) += misc/ +obj-$(CONFIG_USB_PHIDGETSERVO) += misc/ obj-$(CONFIG_USB_RIO500) += misc/ +obj-$(CONFIG_USB_SISUSBVGA) += misc/ obj-$(CONFIG_USB_TEST) += misc/ obj-$(CONFIG_USB_USS720) += misc/ -obj-$(CONFIG_USB_PHIDGETSERVO) += misc/ -obj-$(CONFIG_USB_SISUSBVGA) += misc/ -obj-$(CONFIG_USB_APPLEDISPLAY) += misc/ obj-$(CONFIG_USB_ATM) += atm/ obj-$(CONFIG_USB_SPEEDTOUCH) += atm/ diff --git a/drivers/usb/atm/ueagle-atm.c b/drivers/usb/atm/ueagle-atm.c index b38990adf1c..465961a26e4 100644 --- a/drivers/usb/atm/ueagle-atm.c +++ b/drivers/usb/atm/ueagle-atm.c @@ -1621,26 +1621,32 @@ static int claim_interface(struct usb_device *usb_dev, return ret; } -static void create_fs_entries(struct uea_softc *sc, struct usb_interface *intf) +static struct attribute *attrs[] = { + &dev_attr_stat_status.attr, + &dev_attr_stat_mflags.attr, + &dev_attr_stat_human_status.attr, + &dev_attr_stat_delin.attr, + &dev_attr_stat_vidcpe.attr, + &dev_attr_stat_usrate.attr, + &dev_attr_stat_dsrate.attr, + &dev_attr_stat_usattenuation.attr, + &dev_attr_stat_dsattenuation.attr, + &dev_attr_stat_usmargin.attr, + &dev_attr_stat_dsmargin.attr, + &dev_attr_stat_txflow.attr, + &dev_attr_stat_rxflow.attr, + &dev_attr_stat_uscorr.attr, + &dev_attr_stat_dscorr.attr, + &dev_attr_stat_usunc.attr, + &dev_attr_stat_dsunc.attr, +}; +static struct attribute_group attr_grp = { + .attrs = attrs, +}; + +static int create_fs_entries(struct usb_interface *intf) { - /* sysfs interface */ - device_create_file(&intf->dev, &dev_attr_stat_status); - device_create_file(&intf->dev, &dev_attr_stat_mflags); - device_create_file(&intf->dev, &dev_attr_stat_human_status); - device_create_file(&intf->dev, &dev_attr_stat_delin); - device_create_file(&intf->dev, &dev_attr_stat_vidcpe); - device_create_file(&intf->dev, &dev_attr_stat_usrate); - device_create_file(&intf->dev, &dev_attr_stat_dsrate); - device_create_file(&intf->dev, &dev_attr_stat_usattenuation); - device_create_file(&intf->dev, &dev_attr_stat_dsattenuation); - device_create_file(&intf->dev, &dev_attr_stat_usmargin); - device_create_file(&intf->dev, &dev_attr_stat_dsmargin); - device_create_file(&intf->dev, &dev_attr_stat_txflow); - device_create_file(&intf->dev, &dev_attr_stat_rxflow); - device_create_file(&intf->dev, &dev_attr_stat_uscorr); - device_create_file(&intf->dev, &dev_attr_stat_dscorr); - device_create_file(&intf->dev, &dev_attr_stat_usunc); - device_create_file(&intf->dev, &dev_attr_stat_dsunc); + return sysfs_create_group(&intf->dev.kobj, &attr_grp); } static int uea_bind(struct usbatm_data *usbatm, struct usb_interface *intf, @@ -1708,37 +1714,25 @@ static int uea_bind(struct usbatm_data *usbatm, struct usb_interface *intf, return ret; } - create_fs_entries(sc, intf); + ret = create_fs_entries(intf); + if (ret) { + uea_stop(sc); + kfree(sc); + return ret; + } return 0; } -static void destroy_fs_entries(struct uea_softc *sc, struct usb_interface *intf) +static void destroy_fs_entries(struct usb_interface *intf) { - /* sysfs interface */ - device_remove_file(&intf->dev, &dev_attr_stat_status); - device_remove_file(&intf->dev, &dev_attr_stat_mflags); - device_remove_file(&intf->dev, &dev_attr_stat_human_status); - device_remove_file(&intf->dev, &dev_attr_stat_delin); - device_remove_file(&intf->dev, &dev_attr_stat_vidcpe); - device_remove_file(&intf->dev, &dev_attr_stat_usrate); - device_remove_file(&intf->dev, &dev_attr_stat_dsrate); - device_remove_file(&intf->dev, &dev_attr_stat_usattenuation); - device_remove_file(&intf->dev, &dev_attr_stat_dsattenuation); - device_remove_file(&intf->dev, &dev_attr_stat_usmargin); - device_remove_file(&intf->dev, &dev_attr_stat_dsmargin); - device_remove_file(&intf->dev, &dev_attr_stat_txflow); - device_remove_file(&intf->dev, &dev_attr_stat_rxflow); - device_remove_file(&intf->dev, &dev_attr_stat_uscorr); - device_remove_file(&intf->dev, &dev_attr_stat_dscorr); - device_remove_file(&intf->dev, &dev_attr_stat_usunc); - device_remove_file(&intf->dev, &dev_attr_stat_dsunc); + sysfs_remove_group(&intf->dev.kobj, &attr_grp); } static void uea_unbind(struct usbatm_data *usbatm, struct usb_interface *intf) { struct uea_softc *sc = usbatm->driver_data; - destroy_fs_entries(sc, intf); + destroy_fs_entries(intf); uea_stop(sc); kfree(sc); } diff --git a/drivers/usb/class/usblp.c b/drivers/usb/class/usblp.c index 48dee4b8d8e..9cac11ca1bb 100644 --- a/drivers/usb/class/usblp.c +++ b/drivers/usb/class/usblp.c @@ -813,7 +813,7 @@ static unsigned int usblp_quirks (__u16 vendor, __u16 product) return 0; } -static struct file_operations usblp_fops = { +static const struct file_operations usblp_fops = { .owner = THIS_MODULE, .read = usblp_read, .write = usblp_write, @@ -927,7 +927,9 @@ static int usblp_probe(struct usb_interface *intf, /* Retrieve and store the device ID string. */ usblp_cache_device_id_string(usblp); - device_create_file(&intf->dev, &dev_attr_ieee1284_id); + retval = device_create_file(&intf->dev, &dev_attr_ieee1284_id); + if (retval) + goto abort_intfdata; #ifdef DEBUG usblp_check_status(usblp, 0); @@ -1021,18 +1023,13 @@ static int usblp_select_alts(struct usblp *usblp) for (e = 0; e < ifd->desc.bNumEndpoints; e++) { epd = &ifd->endpoint[e].desc; - if ((epd->bmAttributes&USB_ENDPOINT_XFERTYPE_MASK)!= - USB_ENDPOINT_XFER_BULK) - continue; - - if (!(epd->bEndpointAddress & USB_ENDPOINT_DIR_MASK)) { + if (usb_endpoint_is_bulk_out(epd)) if (!epwrite) epwrite = epd; - } else { + if (usb_endpoint_is_bulk_in(epd)) if (!epread) epread = epd; - } } /* Ignore buggy hardware without the right endpoints. */ diff --git a/drivers/usb/core/Makefile b/drivers/usb/core/Makefile index ec510922af6..34e9bac319b 100644 --- a/drivers/usb/core/Makefile +++ b/drivers/usb/core/Makefile @@ -4,7 +4,7 @@ usbcore-objs := usb.o hub.o hcd.o urb.o message.o driver.o \ config.o file.o buffer.o sysfs.o endpoint.o \ - devio.o notify.o + devio.o notify.o generic.o ifeq ($(CONFIG_PCI),y) usbcore-objs += hcd-pci.o diff --git a/drivers/usb/core/buffer.c b/drivers/usb/core/buffer.c index f4f4ef0f377..840442a25b6 100644 --- a/drivers/usb/core/buffer.c +++ b/drivers/usb/core/buffer.c @@ -104,7 +104,7 @@ void *hcd_buffer_alloc ( dma_addr_t *dma ) { - struct usb_hcd *hcd = bus->hcpriv; + struct usb_hcd *hcd = bus_to_hcd(bus); int i; /* some USB hosts just use PIO */ @@ -127,7 +127,7 @@ void hcd_buffer_free ( dma_addr_t dma ) { - struct usb_hcd *hcd = bus->hcpriv; + struct usb_hcd *hcd = bus_to_hcd(bus); int i; if (!addr) diff --git a/drivers/usb/core/config.c b/drivers/usb/core/config.c index 4c9e63e665b..bfb3731d42d 100644 --- a/drivers/usb/core/config.c +++ b/drivers/usb/core/config.c @@ -475,7 +475,9 @@ int usb_get_configuration(struct usb_device *dev) if (result < 0) { dev_err(ddev, "unable to read config index %d " "descriptor/%s\n", cfgno, "start"); - goto err; + dev_err(ddev, "chopping to %d config(s)\n", cfgno); + dev->descriptor.bNumConfigurations = cfgno; + break; } else if (result < 4) { dev_err(ddev, "config index %d descriptor too short " "(expected %i, got %i)\n", cfgno, diff --git a/drivers/usb/core/devices.c b/drivers/usb/core/devices.c index c0f37343a27..3538c2fdadf 100644 --- a/drivers/usb/core/devices.c +++ b/drivers/usb/core/devices.c @@ -593,7 +593,7 @@ static ssize_t usb_device_read(struct file *file, char __user *buf, size_t nbyte /* Kernel lock for "lastev" protection */ static unsigned int usb_device_poll(struct file *file, struct poll_table_struct *wait) { - struct usb_device_status *st = (struct usb_device_status *)file->private_data; + struct usb_device_status *st = file->private_data; unsigned int mask = 0; lock_kernel(); @@ -603,7 +603,7 @@ static unsigned int usb_device_poll(struct file *file, struct poll_table_struct unlock_kernel(); return POLLIN; } - + /* we may have dropped BKL - need to check for having lost the race */ if (file->private_data) { kfree(st); @@ -667,7 +667,7 @@ static loff_t usb_device_lseek(struct file * file, loff_t offset, int orig) return ret; } -struct file_operations usbfs_devices_fops = { +const struct file_operations usbfs_devices_fops = { .llseek = usb_device_lseek, .read = usb_device_read, .poll = usb_device_poll, diff --git a/drivers/usb/core/devio.c b/drivers/usb/core/devio.c index 218621b9958..a94c63bef63 100644 --- a/drivers/usb/core/devio.c +++ b/drivers/usb/core/devio.c @@ -59,6 +59,9 @@ #define USB_DEVICE_MAX USB_MAXBUS * 128 static struct class *usb_device_class; +/* Mutual exclusion for removal, open, and release */ +DEFINE_MUTEX(usbfs_mutex); + struct async { struct list_head asynclist; struct dev_state *ps; @@ -87,9 +90,10 @@ MODULE_PARM_DESC (usbfs_snoop, "true to log all usbfs traffic"); #define MAX_USBFS_BUFFER_SIZE 16384 -static inline int connected (struct usb_device *dev) +static inline int connected (struct dev_state *ps) { - return dev->state != USB_STATE_NOTATTACHED; + return (!list_empty(&ps->list) && + ps->dev->state != USB_STATE_NOTATTACHED); } static loff_t usbdev_lseek(struct file *file, loff_t offset, int orig) @@ -118,7 +122,7 @@ static loff_t usbdev_lseek(struct file *file, loff_t offset, int orig) static ssize_t usbdev_read(struct file *file, char __user *buf, size_t nbytes, loff_t *ppos) { - struct dev_state *ps = (struct dev_state *)file->private_data; + struct dev_state *ps = file->private_data; struct usb_device *dev = ps->dev; ssize_t ret = 0; unsigned len; @@ -127,7 +131,7 @@ static ssize_t usbdev_read(struct file *file, char __user *buf, size_t nbytes, l pos = *ppos; usb_lock_device(dev); - if (!connected(dev)) { + if (!connected(ps)) { ret = -ENODEV; goto err; } else if (pos < 0) { @@ -301,7 +305,7 @@ static void snoop_urb(struct urb *urb, void __user *userurb) static void async_completed(struct urb *urb, struct pt_regs *regs) { - struct async *as = (struct async *)urb->context; + struct async *as = urb->context; struct dev_state *ps = as->ps; struct siginfo sinfo; @@ -541,25 +545,25 @@ static int usbdev_open(struct inode *inode, struct file *file) struct dev_state *ps; int ret; - /* - * no locking necessary here, as chrdev_open has the kernel lock - * (still acquire the kernel lock for safety) - */ + /* Protect against simultaneous removal or release */ + mutex_lock(&usbfs_mutex); + ret = -ENOMEM; if (!(ps = kmalloc(sizeof(struct dev_state), GFP_KERNEL))) - goto out_nolock; + goto out; - lock_kernel(); ret = -ENOENT; /* check if we are called from a real node or usbfs */ if (imajor(inode) == USB_DEVICE_MAJOR) dev = usbdev_lookup_minor(iminor(inode)); if (!dev) - dev = inode->u.generic_ip; - if (!dev) { - kfree(ps); + dev = inode->i_private; + if (!dev) goto out; - } + ret = usb_autoresume_device(dev, 1); + if (ret) + goto out; + usb_get_dev(dev); ret = 0; ps->dev = dev; @@ -579,30 +583,36 @@ static int usbdev_open(struct inode *inode, struct file *file) list_add_tail(&ps->list, &dev->filelist); file->private_data = ps; out: - unlock_kernel(); - out_nolock: - return ret; + if (ret) + kfree(ps); + mutex_unlock(&usbfs_mutex); + return ret; } static int usbdev_release(struct inode *inode, struct file *file) { - struct dev_state *ps = (struct dev_state *)file->private_data; + struct dev_state *ps = file->private_data; struct usb_device *dev = ps->dev; unsigned int ifnum; usb_lock_device(dev); + + /* Protect against simultaneous open */ + mutex_lock(&usbfs_mutex); list_del_init(&ps->list); + mutex_unlock(&usbfs_mutex); + for (ifnum = 0; ps->ifclaimed && ifnum < 8*sizeof(ps->ifclaimed); ifnum++) { if (test_bit(ifnum, &ps->ifclaimed)) releaseintf(ps, ifnum); } destroy_all_async(ps); + usb_autosuspend_device(dev, 1); usb_unlock_device(dev); usb_put_dev(dev); - ps->dev = NULL; kfree(ps); - return 0; + return 0; } static int proc_control(struct dev_state *ps, void __user *arg) @@ -1322,7 +1332,7 @@ static int proc_ioctl(struct dev_state *ps, struct usbdevfs_ioctl *ctl) } } - if (!connected(ps->dev)) { + if (!connected(ps)) { kfree(buf); return -ENODEV; } @@ -1349,7 +1359,7 @@ static int proc_ioctl(struct dev_state *ps, struct usbdevfs_ioctl *ctl) /* let kernel drivers try to (re)bind to the interface */ case USBDEVFS_CONNECT: usb_unlock_device(ps->dev); - bus_rescan_devices(intf->dev.bus); + retval = bus_rescan_devices(intf->dev.bus); usb_lock_device(ps->dev); break; @@ -1413,7 +1423,7 @@ static int proc_ioctl_compat(struct dev_state *ps, compat_uptr_t arg) */ static int usbdev_ioctl(struct inode *inode, struct file *file, unsigned int cmd, unsigned long arg) { - struct dev_state *ps = (struct dev_state *)file->private_data; + struct dev_state *ps = file->private_data; struct usb_device *dev = ps->dev; void __user *p = (void __user *)arg; int ret = -ENOTTY; @@ -1421,7 +1431,7 @@ static int usbdev_ioctl(struct inode *inode, struct file *file, unsigned int cmd if (!(file->f_mode & FMODE_WRITE)) return -EPERM; usb_lock_device(dev); - if (!connected(dev)) { + if (!connected(ps)) { usb_unlock_device(dev); return -ENODEV; } @@ -1556,18 +1566,18 @@ static int usbdev_ioctl(struct inode *inode, struct file *file, unsigned int cmd /* No kernel lock - fine */ static unsigned int usbdev_poll(struct file *file, struct poll_table_struct *wait) { - struct dev_state *ps = (struct dev_state *)file->private_data; - unsigned int mask = 0; + struct dev_state *ps = file->private_data; + unsigned int mask = 0; poll_wait(file, &ps->wait, wait); if (file->f_mode & FMODE_WRITE && !list_empty(&ps->async_completed)) mask |= POLLOUT | POLLWRNORM; - if (!connected(ps->dev)) + if (!connected(ps)) mask |= POLLERR | POLLHUP; return mask; } -struct file_operations usbfs_device_file_operations = { +const struct file_operations usbfs_device_file_operations = { .llseek = usbdev_lseek, .read = usbdev_read, .poll = usbdev_poll, diff --git a/drivers/usb/core/driver.c b/drivers/usb/core/driver.c index ec890650141..b1046324441 100644 --- a/drivers/usb/core/driver.c +++ b/drivers/usb/core/driver.c @@ -17,7 +17,8 @@ * * NOTE! This is not actually a driver at all, rather this is * just a collection of helper routines that implement the - * generic USB things that the real drivers can use.. + * matching, probing, releasing, suspending and resuming for + * real drivers. * */ @@ -34,38 +35,6 @@ struct usb_dynid { struct usb_device_id id; }; - -static int generic_probe(struct device *dev) -{ - return 0; -} -static int generic_remove(struct device *dev) -{ - struct usb_device *udev = to_usb_device(dev); - - /* if this is only an unbind, not a physical disconnect, then - * unconfigure the device */ - if (udev->state == USB_STATE_CONFIGURED) - usb_set_configuration(udev, 0); - - /* in case the call failed or the device was suspended */ - if (udev->state >= USB_STATE_CONFIGURED) - usb_disable_device(udev, 0); - return 0; -} - -struct device_driver usb_generic_driver = { - .owner = THIS_MODULE, - .name = "usb", - .bus = &usb_bus_type, - .probe = generic_probe, - .remove = generic_remove, -}; - -/* Fun hack to determine if the struct device is a - * usb device or a usb interface. */ -int usb_generic_driver_data; - #ifdef CONFIG_HOTPLUG /* @@ -80,6 +49,7 @@ static ssize_t store_new_id(struct device_driver *driver, u32 idVendor = 0; u32 idProduct = 0; int fields = 0; + int retval = 0; fields = sscanf(buf, "%x %x", &idVendor, &idProduct); if (fields < 2) @@ -99,10 +69,12 @@ static ssize_t store_new_id(struct device_driver *driver, spin_unlock(&usb_drv->dynids.lock); if (get_driver(driver)) { - driver_attach(driver); + retval = driver_attach(driver); put_driver(driver); } + if (retval) + return retval; return count; } static DRIVER_ATTR(new_id, S_IWUSR, NULL, store_new_id); @@ -115,7 +87,7 @@ static int usb_create_newid_file(struct usb_driver *usb_drv) goto exit; if (usb_drv->probe != NULL) - error = sysfs_create_file(&usb_drv->driver.kobj, + error = sysfs_create_file(&usb_drv->drvwrap.driver.kobj, &driver_attr_new_id.attr); exit: return error; @@ -127,7 +99,7 @@ static void usb_remove_newid_file(struct usb_driver *usb_drv) return; if (usb_drv->probe != NULL) - sysfs_remove_file(&usb_drv->driver.kobj, + sysfs_remove_file(&usb_drv->drvwrap.driver.kobj, &driver_attr_new_id.attr); } @@ -174,21 +146,57 @@ static const struct usb_device_id *usb_match_dynamic_id(struct usb_interface *in } -/* called from driver core with usb_bus_type.subsys writelock */ +/* called from driver core with dev locked */ +static int usb_probe_device(struct device *dev) +{ + struct usb_device_driver *udriver = to_usb_device_driver(dev->driver); + struct usb_device *udev; + int error = -ENODEV; + + dev_dbg(dev, "%s\n", __FUNCTION__); + + if (!is_usb_device(dev)) /* Sanity check */ + return error; + + udev = to_usb_device(dev); + + /* TODO: Add real matching code */ + + /* The device should always appear to be in use + * unless the driver suports autosuspend. + */ + udev->pm_usage_cnt = !(udriver->supports_autosuspend); + + error = udriver->probe(udev); + return error; +} + +/* called from driver core with dev locked */ +static int usb_unbind_device(struct device *dev) +{ + struct usb_device_driver *udriver = to_usb_device_driver(dev->driver); + + udriver->disconnect(to_usb_device(dev)); + return 0; +} + + +/* called from driver core with dev locked */ static int usb_probe_interface(struct device *dev) { - struct usb_interface * intf = to_usb_interface(dev); - struct usb_driver * driver = to_usb_driver(dev->driver); + struct usb_driver *driver = to_usb_driver(dev->driver); + struct usb_interface *intf; + struct usb_device *udev; const struct usb_device_id *id; int error = -ENODEV; dev_dbg(dev, "%s\n", __FUNCTION__); - if (!driver->probe) + if (is_usb_device(dev)) /* Sanity check */ return error; - /* FIXME we'd much prefer to just resume it ... */ - if (interface_to_usbdev(intf)->state == USB_STATE_SUSPENDED) - return -EHOSTUNREACH; + + intf = to_usb_interface(dev); + udev = interface_to_usbdev(intf); id = usb_match_id(intf, driver->id_table); if (!id) @@ -196,48 +204,165 @@ static int usb_probe_interface(struct device *dev) if (id) { dev_dbg(dev, "%s - got id\n", __FUNCTION__); + error = usb_autoresume_device(udev, 1); + if (error) + return error; + /* Interface "power state" doesn't correspond to any hardware * state whatsoever. We use it to record when it's bound to * a driver that may start I/0: it's not frozen/quiesced. */ mark_active(intf); intf->condition = USB_INTERFACE_BINDING; + + /* The interface should always appear to be in use + * unless the driver suports autosuspend. + */ + intf->pm_usage_cnt = !(driver->supports_autosuspend); + error = driver->probe(intf, id); if (error) { mark_quiesced(intf); + intf->needs_remote_wakeup = 0; intf->condition = USB_INTERFACE_UNBOUND; } else intf->condition = USB_INTERFACE_BOUND; + + usb_autosuspend_device(udev, 1); } return error; } -/* called from driver core with usb_bus_type.subsys writelock */ +/* called from driver core with dev locked */ static int usb_unbind_interface(struct device *dev) { + struct usb_driver *driver = to_usb_driver(dev->driver); struct usb_interface *intf = to_usb_interface(dev); - struct usb_driver *driver = to_usb_driver(intf->dev.driver); + struct usb_device *udev; + int error; intf->condition = USB_INTERFACE_UNBINDING; + /* Autoresume for set_interface call below */ + udev = interface_to_usbdev(intf); + error = usb_autoresume_device(udev, 1); + /* release all urbs for this interface */ usb_disable_interface(interface_to_usbdev(intf), intf); - if (driver && driver->disconnect) - driver->disconnect(intf); + driver->disconnect(intf); /* reset other interface state */ usb_set_interface(interface_to_usbdev(intf), intf->altsetting[0].desc.bInterfaceNumber, 0); usb_set_intfdata(intf, NULL); + intf->condition = USB_INTERFACE_UNBOUND; mark_quiesced(intf); + intf->needs_remote_wakeup = 0; + + if (!error) + usb_autosuspend_device(udev, 1); return 0; } +/** + * usb_driver_claim_interface - bind a driver to an interface + * @driver: the driver to be bound + * @iface: the interface to which it will be bound; must be in the + * usb device's active configuration + * @priv: driver data associated with that interface + * + * This is used by usb device drivers that need to claim more than one + * interface on a device when probing (audio and acm are current examples). + * No device driver should directly modify internal usb_interface or + * usb_device structure members. + * + * Few drivers should need to use this routine, since the most natural + * way to bind to an interface is to return the private data from + * the driver's probe() method. + * + * Callers must own the device lock and the driver model's usb_bus_type.subsys + * writelock. So driver probe() entries don't need extra locking, + * but other call contexts may need to explicitly claim those locks. + */ +int usb_driver_claim_interface(struct usb_driver *driver, + struct usb_interface *iface, void* priv) +{ + struct device *dev = &iface->dev; + struct usb_device *udev = interface_to_usbdev(iface); + int retval = 0; + + if (dev->driver) + return -EBUSY; + + dev->driver = &driver->drvwrap.driver; + usb_set_intfdata(iface, priv); + + mutex_lock_nested(&udev->pm_mutex, udev->level); + iface->condition = USB_INTERFACE_BOUND; + mark_active(iface); + iface->pm_usage_cnt = !(driver->supports_autosuspend); + mutex_unlock(&udev->pm_mutex); + + /* if interface was already added, bind now; else let + * the future device_add() bind it, bypassing probe() + */ + if (device_is_registered(dev)) + retval = device_bind_driver(dev); + + return retval; +} +EXPORT_SYMBOL(usb_driver_claim_interface); + +/** + * usb_driver_release_interface - unbind a driver from an interface + * @driver: the driver to be unbound + * @iface: the interface from which it will be unbound + * + * This can be used by drivers to release an interface without waiting + * for their disconnect() methods to be called. In typical cases this + * also causes the driver disconnect() method to be called. + * + * This call is synchronous, and may not be used in an interrupt context. + * Callers must own the device lock and the driver model's usb_bus_type.subsys + * writelock. So driver disconnect() entries don't need extra locking, + * but other call contexts may need to explicitly claim those locks. + */ +void usb_driver_release_interface(struct usb_driver *driver, + struct usb_interface *iface) +{ + struct device *dev = &iface->dev; + struct usb_device *udev = interface_to_usbdev(iface); + + /* this should never happen, don't release something that's not ours */ + if (!dev->driver || dev->driver != &driver->drvwrap.driver) + return; + + /* don't release from within disconnect() */ + if (iface->condition != USB_INTERFACE_BOUND) + return; + + /* don't release if the interface hasn't been added yet */ + if (device_is_registered(dev)) { + iface->condition = USB_INTERFACE_UNBINDING; + device_release_driver(dev); + } + + dev->driver = NULL; + usb_set_intfdata(iface, NULL); + + mutex_lock_nested(&udev->pm_mutex, udev->level); + iface->condition = USB_INTERFACE_UNBOUND; + mark_quiesced(iface); + iface->needs_remote_wakeup = 0; + mutex_unlock(&udev->pm_mutex); +} +EXPORT_SYMBOL(usb_driver_release_interface); + /* returns 0 if no match, 1 if match */ static int usb_match_one_id(struct usb_interface *interface, const struct usb_device_id *id) @@ -381,35 +506,223 @@ EXPORT_SYMBOL_GPL_FUTURE(usb_match_id); int usb_device_match(struct device *dev, struct device_driver *drv) { + /* devices and interfaces are handled separately */ + if (is_usb_device(dev)) { + + /* interface drivers never match devices */ + if (!is_usb_device_driver(drv)) + return 0; + + /* TODO: Add real matching code */ + return 1; + + } else { + struct usb_interface *intf; + struct usb_driver *usb_drv; + const struct usb_device_id *id; + + /* device drivers never match interfaces */ + if (is_usb_device_driver(drv)) + return 0; + + intf = to_usb_interface(dev); + usb_drv = to_usb_driver(drv); + + id = usb_match_id(intf, usb_drv->id_table); + if (id) + return 1; + + id = usb_match_dynamic_id(intf, usb_drv); + if (id) + return 1; + } + + return 0; +} + +#ifdef CONFIG_HOTPLUG + +/* + * This sends an uevent to userspace, typically helping to load driver + * or other modules, configure the device, and more. Drivers can provide + * a MODULE_DEVICE_TABLE to help with module loading subtasks. + * + * We're called either from khubd (the typical case) or from root hub + * (init, kapmd, modprobe, rmmod, etc), but the agents need to handle + * delays in event delivery. Use sysfs (and DEVPATH) to make sure the + * device (and this configuration!) are still present. + */ +static int usb_uevent(struct device *dev, char **envp, int num_envp, + char *buffer, int buffer_size) +{ struct usb_interface *intf; - struct usb_driver *usb_drv; - const struct usb_device_id *id; + struct usb_device *usb_dev; + struct usb_host_interface *alt; + int i = 0; + int length = 0; - /* check for generic driver, which we don't match any device with */ - if (drv == &usb_generic_driver) - return 0; + if (!dev) + return -ENODEV; - intf = to_usb_interface(dev); - usb_drv = to_usb_driver(drv); + /* driver is often null here; dev_dbg() would oops */ + pr_debug ("usb %s: uevent\n", dev->bus_id); - id = usb_match_id(intf, usb_drv->id_table); - if (id) - return 1; + if (is_usb_device(dev)) { + usb_dev = to_usb_device(dev); + alt = NULL; + } else { + intf = to_usb_interface(dev); + usb_dev = interface_to_usbdev(intf); + alt = intf->cur_altsetting; + } + + if (usb_dev->devnum < 0) { + pr_debug ("usb %s: already deleted?\n", dev->bus_id); + return -ENODEV; + } + if (!usb_dev->bus) { + pr_debug ("usb %s: bus removed?\n", dev->bus_id); + return -ENODEV; + } + +#ifdef CONFIG_USB_DEVICEFS + /* If this is available, userspace programs can directly read + * all the device descriptors we don't tell them about. Or + * even act as usermode drivers. + * + * FIXME reduce hardwired intelligence here + */ + if (add_uevent_var(envp, num_envp, &i, + buffer, buffer_size, &length, + "DEVICE=/proc/bus/usb/%03d/%03d", + usb_dev->bus->busnum, usb_dev->devnum)) + return -ENOMEM; +#endif + + /* per-device configurations are common */ + if (add_uevent_var(envp, num_envp, &i, + buffer, buffer_size, &length, + "PRODUCT=%x/%x/%x", + le16_to_cpu(usb_dev->descriptor.idVendor), + le16_to_cpu(usb_dev->descriptor.idProduct), + le16_to_cpu(usb_dev->descriptor.bcdDevice))) + return -ENOMEM; + + /* class-based driver binding models */ + if (add_uevent_var(envp, num_envp, &i, + buffer, buffer_size, &length, + "TYPE=%d/%d/%d", + usb_dev->descriptor.bDeviceClass, + usb_dev->descriptor.bDeviceSubClass, + usb_dev->descriptor.bDeviceProtocol)) + return -ENOMEM; + + if (!is_usb_device(dev)) { + + if (add_uevent_var(envp, num_envp, &i, + buffer, buffer_size, &length, + "INTERFACE=%d/%d/%d", + alt->desc.bInterfaceClass, + alt->desc.bInterfaceSubClass, + alt->desc.bInterfaceProtocol)) + return -ENOMEM; + + if (add_uevent_var(envp, num_envp, &i, + buffer, buffer_size, &length, + "MODALIAS=usb:v%04Xp%04Xd%04Xdc%02Xdsc%02Xdp%02Xic%02Xisc%02Xip%02X", + le16_to_cpu(usb_dev->descriptor.idVendor), + le16_to_cpu(usb_dev->descriptor.idProduct), + le16_to_cpu(usb_dev->descriptor.bcdDevice), + usb_dev->descriptor.bDeviceClass, + usb_dev->descriptor.bDeviceSubClass, + usb_dev->descriptor.bDeviceProtocol, + alt->desc.bInterfaceClass, + alt->desc.bInterfaceSubClass, + alt->desc.bInterfaceProtocol)) + return -ENOMEM; + } + + envp[i] = NULL; - id = usb_match_dynamic_id(intf, usb_drv); - if (id) - return 1; return 0; } +#else + +static int usb_uevent(struct device *dev, char **envp, + int num_envp, char *buffer, int buffer_size) +{ + return -ENODEV; +} + +#endif /* CONFIG_HOTPLUG */ + +/** + * usb_register_device_driver - register a USB device (not interface) driver + * @new_udriver: USB operations for the device driver + * @owner: module owner of this driver. + * + * Registers a USB device driver with the USB core. The list of + * unattached devices will be rescanned whenever a new driver is + * added, allowing the new driver to attach to any recognized devices. + * Returns a negative error code on failure and 0 on success. + */ +int usb_register_device_driver(struct usb_device_driver *new_udriver, + struct module *owner) +{ + int retval = 0; + + if (usb_disabled()) + return -ENODEV; + + new_udriver->drvwrap.for_devices = 1; + new_udriver->drvwrap.driver.name = (char *) new_udriver->name; + new_udriver->drvwrap.driver.bus = &usb_bus_type; + new_udriver->drvwrap.driver.probe = usb_probe_device; + new_udriver->drvwrap.driver.remove = usb_unbind_device; + new_udriver->drvwrap.driver.owner = owner; + + retval = driver_register(&new_udriver->drvwrap.driver); + + if (!retval) { + pr_info("%s: registered new device driver %s\n", + usbcore_name, new_udriver->name); + usbfs_update_special(); + } else { + printk(KERN_ERR "%s: error %d registering device " + " driver %s\n", + usbcore_name, retval, new_udriver->name); + } + + return retval; +} +EXPORT_SYMBOL_GPL(usb_register_device_driver); + +/** + * usb_deregister_device_driver - unregister a USB device (not interface) driver + * @udriver: USB operations of the device driver to unregister + * Context: must be able to sleep + * + * Unlinks the specified driver from the internal USB driver list. + */ +void usb_deregister_device_driver(struct usb_device_driver *udriver) +{ + pr_info("%s: deregistering device driver %s\n", + usbcore_name, udriver->name); + + driver_unregister(&udriver->drvwrap.driver); + usbfs_update_special(); +} +EXPORT_SYMBOL_GPL(usb_deregister_device_driver); + /** - * usb_register_driver - register a USB driver - * @new_driver: USB operations for the driver + * usb_register_driver - register a USB interface driver + * @new_driver: USB operations for the interface driver * @owner: module owner of this driver. * - * Registers a USB driver with the USB core. The list of unattached - * interfaces will be rescanned whenever a new driver is added, allowing - * the new driver to attach to any recognized devices. + * Registers a USB interface driver with the USB core. The list of + * unattached interfaces will be rescanned whenever a new driver is + * added, allowing the new driver to attach to any recognized interfaces. * Returns a negative error code on failure and 0 on success. * * NOTE: if you want your driver to use the USB major number, you must call @@ -423,23 +736,25 @@ int usb_register_driver(struct usb_driver *new_driver, struct module *owner) if (usb_disabled()) return -ENODEV; - new_driver->driver.name = (char *)new_driver->name; - new_driver->driver.bus = &usb_bus_type; - new_driver->driver.probe = usb_probe_interface; - new_driver->driver.remove = usb_unbind_interface; - new_driver->driver.owner = owner; + new_driver->drvwrap.for_devices = 0; + new_driver->drvwrap.driver.name = (char *) new_driver->name; + new_driver->drvwrap.driver.bus = &usb_bus_type; + new_driver->drvwrap.driver.probe = usb_probe_interface; + new_driver->drvwrap.driver.remove = usb_unbind_interface; + new_driver->drvwrap.driver.owner = owner; spin_lock_init(&new_driver->dynids.lock); INIT_LIST_HEAD(&new_driver->dynids.list); - retval = driver_register(&new_driver->driver); + retval = driver_register(&new_driver->drvwrap.driver); if (!retval) { - pr_info("%s: registered new driver %s\n", + pr_info("%s: registered new interface driver %s\n", usbcore_name, new_driver->name); usbfs_update_special(); usb_create_newid_file(new_driver); } else { - printk(KERN_ERR "%s: error %d registering driver %s\n", + printk(KERN_ERR "%s: error %d registering interface " + " driver %s\n", usbcore_name, retval, new_driver->name); } @@ -448,8 +763,8 @@ int usb_register_driver(struct usb_driver *new_driver, struct module *owner) EXPORT_SYMBOL_GPL_FUTURE(usb_register_driver); /** - * usb_deregister - unregister a USB driver - * @driver: USB operations of the driver to unregister + * usb_deregister - unregister a USB interface driver + * @driver: USB operations of the interface driver to unregister * Context: must be able to sleep * * Unlinks the specified driver from the internal USB driver list. @@ -460,12 +775,554 @@ EXPORT_SYMBOL_GPL_FUTURE(usb_register_driver); */ void usb_deregister(struct usb_driver *driver) { - pr_info("%s: deregistering driver %s\n", usbcore_name, driver->name); + pr_info("%s: deregistering interface driver %s\n", + usbcore_name, driver->name); usb_remove_newid_file(driver); usb_free_dynids(driver); - driver_unregister(&driver->driver); + driver_unregister(&driver->drvwrap.driver); usbfs_update_special(); } EXPORT_SYMBOL_GPL_FUTURE(usb_deregister); + +#ifdef CONFIG_PM + +/* Caller has locked udev->pm_mutex */ +static int suspend_device(struct usb_device *udev, pm_message_t msg) +{ + struct usb_device_driver *udriver; + int status = 0; + + if (udev->state == USB_STATE_NOTATTACHED || + udev->state == USB_STATE_SUSPENDED) + goto done; + + /* For devices that don't have a driver, we do a standard suspend. */ + if (udev->dev.driver == NULL) { + udev->do_remote_wakeup = 0; + status = usb_port_suspend(udev); + goto done; + } + + udriver = to_usb_device_driver(udev->dev.driver); + status = udriver->suspend(udev, msg); + +done: + // dev_dbg(&udev->dev, "%s: status %d\n", __FUNCTION__, status); + if (status == 0) + udev->dev.power.power_state.event = msg.event; + return status; +} + +/* Caller has locked udev->pm_mutex */ +static int resume_device(struct usb_device *udev) +{ + struct usb_device_driver *udriver; + int status = 0; + + if (udev->state == USB_STATE_NOTATTACHED || + udev->state != USB_STATE_SUSPENDED) + goto done; + + /* Can't resume it if it doesn't have a driver. */ + if (udev->dev.driver == NULL) { + status = -ENOTCONN; + goto done; + } + + udriver = to_usb_device_driver(udev->dev.driver); + status = udriver->resume(udev); + +done: + // dev_dbg(&udev->dev, "%s: status %d\n", __FUNCTION__, status); + if (status == 0) + udev->dev.power.power_state.event = PM_EVENT_ON; + return status; +} + +/* Caller has locked intf's usb_device's pm_mutex */ +static int suspend_interface(struct usb_interface *intf, pm_message_t msg) +{ + struct usb_driver *driver; + int status = 0; + + /* with no hardware, USB interfaces only use FREEZE and ON states */ + if (interface_to_usbdev(intf)->state == USB_STATE_NOTATTACHED || + !is_active(intf)) + goto done; + + if (intf->condition == USB_INTERFACE_UNBOUND) /* This can't happen */ + goto done; + driver = to_usb_driver(intf->dev.driver); + + if (driver->suspend && driver->resume) { + status = driver->suspend(intf, msg); + if (status == 0) + mark_quiesced(intf); + else if (!interface_to_usbdev(intf)->auto_pm) + dev_err(&intf->dev, "%s error %d\n", + "suspend", status); + } else { + // FIXME else if there's no suspend method, disconnect... + // Not possible if auto_pm is set... + dev_warn(&intf->dev, "no suspend for driver %s?\n", + driver->name); + mark_quiesced(intf); + } + +done: + // dev_dbg(&intf->dev, "%s: status %d\n", __FUNCTION__, status); + if (status == 0) + intf->dev.power.power_state.event = msg.event; + return status; +} + +/* Caller has locked intf's usb_device's pm_mutex */ +static int resume_interface(struct usb_interface *intf) +{ + struct usb_driver *driver; + int status = 0; + + if (interface_to_usbdev(intf)->state == USB_STATE_NOTATTACHED || + is_active(intf)) + goto done; + + /* Don't let autoresume interfere with unbinding */ + if (intf->condition == USB_INTERFACE_UNBINDING) + goto done; + + /* Can't resume it if it doesn't have a driver. */ + if (intf->condition == USB_INTERFACE_UNBOUND) { + status = -ENOTCONN; + goto done; + } + driver = to_usb_driver(intf->dev.driver); + + if (driver->resume) { + status = driver->resume(intf); + if (status) + dev_err(&intf->dev, "%s error %d\n", + "resume", status); + else + mark_active(intf); + } else { + dev_warn(&intf->dev, "no resume for driver %s?\n", + driver->name); + mark_active(intf); + } + +done: + // dev_dbg(&intf->dev, "%s: status %d\n", __FUNCTION__, status); + if (status == 0) + intf->dev.power.power_state.event = PM_EVENT_ON; + return status; +} + +/** + * usb_suspend_both - suspend a USB device and its interfaces + * @udev: the usb_device to suspend + * @msg: Power Management message describing this state transition + * + * This is the central routine for suspending USB devices. It calls the + * suspend methods for all the interface drivers in @udev and then calls + * the suspend method for @udev itself. If an error occurs at any stage, + * all the interfaces which were suspended are resumed so that they remain + * in the same state as the device. + * + * If an autosuspend is in progress (@udev->auto_pm is set), the routine + * checks first to make sure that neither the device itself or any of its + * active interfaces is in use (pm_usage_cnt is greater than 0). If they + * are, the autosuspend fails. + * + * If the suspend succeeds, the routine recursively queues an autosuspend + * request for @udev's parent device, thereby propagating the change up + * the device tree. If all of the parent's children are now suspended, + * the parent will autosuspend in turn. + * + * The suspend method calls are subject to mutual exclusion under control + * of @udev's pm_mutex. Many of these calls are also under the protection + * of @udev's device lock (including all requests originating outside the + * USB subsystem), but autosuspend requests generated by a child device or + * interface driver may not be. Usbcore will insure that the method calls + * do not arrive during bind, unbind, or reset operations. However, drivers + * must be prepared to handle suspend calls arriving at unpredictable times. + * The only way to block such calls is to do an autoresume (preventing + * autosuspends) while holding @udev's device lock (preventing outside + * suspends). + * + * The caller must hold @udev->pm_mutex. + * + * This routine can run only in process context. + */ +int usb_suspend_both(struct usb_device *udev, pm_message_t msg) +{ + int status = 0; + int i = 0; + struct usb_interface *intf; + struct usb_device *parent = udev->parent; + + cancel_delayed_work(&udev->autosuspend); + if (udev->state == USB_STATE_NOTATTACHED) + return 0; + if (udev->state == USB_STATE_SUSPENDED) + return 0; + + udev->do_remote_wakeup = device_may_wakeup(&udev->dev); + + /* For autosuspend, fail fast if anything is in use. + * Also fail if any interfaces require remote wakeup but it + * isn't available. */ + if (udev->auto_pm) { + if (udev->pm_usage_cnt > 0) + return -EBUSY; + if (udev->actconfig) { + for (; i < udev->actconfig->desc.bNumInterfaces; i++) { + intf = udev->actconfig->interface[i]; + if (!is_active(intf)) + continue; + if (intf->pm_usage_cnt > 0) + return -EBUSY; + if (intf->needs_remote_wakeup && + !udev->do_remote_wakeup) { + dev_dbg(&udev->dev, + "remote wakeup needed for autosuspend\n"); + return -EOPNOTSUPP; + } + } + i = 0; + } + } + + /* Suspend all the interfaces and then udev itself */ + if (udev->actconfig) { + for (; i < udev->actconfig->desc.bNumInterfaces; i++) { + intf = udev->actconfig->interface[i]; + status = suspend_interface(intf, msg); + if (status != 0) + break; + } + } + if (status == 0) + status = suspend_device(udev, msg); + + /* If the suspend failed, resume interfaces that did get suspended */ + if (status != 0) { + while (--i >= 0) { + intf = udev->actconfig->interface[i]; + resume_interface(intf); + } + + /* If the suspend succeeded, propagate it up the tree */ + } else if (parent) + usb_autosuspend_device(parent, 0); + + // dev_dbg(&udev->dev, "%s: status %d\n", __FUNCTION__, status); + return status; +} + +/** + * usb_resume_both - resume a USB device and its interfaces + * @udev: the usb_device to resume + * + * This is the central routine for resuming USB devices. It calls the + * the resume method for @udev and then calls the resume methods for all + * the interface drivers in @udev. + * + * Before starting the resume, the routine calls itself recursively for + * the parent device of @udev, thereby propagating the change up the device + * tree and assuring that @udev will be able to resume. If the parent is + * unable to resume successfully, the routine fails. + * + * The resume method calls are subject to mutual exclusion under control + * of @udev's pm_mutex. Many of these calls are also under the protection + * of @udev's device lock (including all requests originating outside the + * USB subsystem), but autoresume requests generated by a child device or + * interface driver may not be. Usbcore will insure that the method calls + * do not arrive during bind, unbind, or reset operations. However, drivers + * must be prepared to handle resume calls arriving at unpredictable times. + * The only way to block such calls is to do an autoresume (preventing + * other autoresumes) while holding @udev's device lock (preventing outside + * resumes). + * + * The caller must hold @udev->pm_mutex. + * + * This routine can run only in process context. + */ +int usb_resume_both(struct usb_device *udev) +{ + int status = 0; + int i; + struct usb_interface *intf; + struct usb_device *parent = udev->parent; + + cancel_delayed_work(&udev->autosuspend); + if (udev->state == USB_STATE_NOTATTACHED) + return -ENODEV; + + /* Propagate the resume up the tree, if necessary */ + if (udev->state == USB_STATE_SUSPENDED) { + if (parent) { + mutex_lock_nested(&parent->pm_mutex, parent->level); + parent->auto_pm = 1; + status = usb_resume_both(parent); + } else { + + /* We can't progagate beyond the USB subsystem, + * so if a root hub's controller is suspended + * then we're stuck. */ + if (udev->dev.parent->power.power_state.event != + PM_EVENT_ON) + status = -EHOSTUNREACH; + } + if (status == 0) + status = resume_device(udev); + if (parent) + mutex_unlock(&parent->pm_mutex); + } else { + + /* Needed only for setting udev->dev.power.power_state.event + * and for possible debugging message. */ + status = resume_device(udev); + } + + /* Now the parent won't suspend until we are finished */ + + if (status == 0 && udev->actconfig) { + for (i = 0; i < udev->actconfig->desc.bNumInterfaces; i++) { + intf = udev->actconfig->interface[i]; + resume_interface(intf); + } + } + + // dev_dbg(&udev->dev, "%s: status %d\n", __FUNCTION__, status); + return status; +} + +#ifdef CONFIG_USB_SUSPEND + +/** + * usb_autosuspend_device - delayed autosuspend of a USB device and its interfaces + * @udev - the usb_device to autosuspend + * @dec_usage_cnt - flag to decrement @udev's PM-usage counter + * + * This routine should be called when a core subsystem is finished using + * @udev and wants to allow it to autosuspend. Examples would be when + * @udev's device file in usbfs is closed or after a configuration change. + * + * @dec_usage_cnt should be 1 if the subsystem previously incremented + * @udev's usage counter (such as by passing 1 to usb_autoresume_device); + * otherwise it should be 0. + * + * If the usage counter for @udev or any of its active interfaces is greater + * than 0, the autosuspend request will not be queued. (If an interface + * driver does not support autosuspend then its usage counter is permanently + * positive.) Likewise, if an interface driver requires remote-wakeup + * capability during autosuspend but remote wakeup is disabled, the + * autosuspend will fail. + * + * Often the caller will hold @udev's device lock, but this is not + * necessary. + * + * This routine can run only in process context. + */ +void usb_autosuspend_device(struct usb_device *udev, int dec_usage_cnt) +{ + mutex_lock_nested(&udev->pm_mutex, udev->level); + udev->pm_usage_cnt -= dec_usage_cnt; + if (udev->pm_usage_cnt <= 0) + schedule_delayed_work(&udev->autosuspend, + USB_AUTOSUSPEND_DELAY); + mutex_unlock(&udev->pm_mutex); + // dev_dbg(&udev->dev, "%s: cnt %d\n", + // __FUNCTION__, udev->pm_usage_cnt); +} + +/** + * usb_autoresume_device - immediately autoresume a USB device and its interfaces + * @udev - the usb_device to autoresume + * @inc_usage_cnt - flag to increment @udev's PM-usage counter + * + * This routine should be called when a core subsystem wants to use @udev + * and needs to guarantee that it is not suspended. In addition, the + * caller can prevent @udev from being autosuspended subsequently. (Note + * that this will not prevent suspend events originating in the PM core.) + * Examples would be when @udev's device file in usbfs is opened (autosuspend + * should be prevented until the file is closed) or when a remote-wakeup + * request is received (later autosuspends should not be prevented). + * + * @inc_usage_cnt should be 1 to increment @udev's usage counter and prevent + * autosuspends. This prevention will persist until the usage counter is + * decremented again (such as by passing 1 to usb_autosuspend_device). + * Otherwise @inc_usage_cnt should be 0 to leave the usage counter unchanged. + * Regardless, if the autoresume fails then the usage counter is not + * incremented. + * + * Often the caller will hold @udev's device lock, but this is not + * necessary (and attempting it might cause deadlock). + * + * This routine can run only in process context. + */ +int usb_autoresume_device(struct usb_device *udev, int inc_usage_cnt) +{ + int status; + + mutex_lock_nested(&udev->pm_mutex, udev->level); + udev->pm_usage_cnt += inc_usage_cnt; + udev->auto_pm = 1; + status = usb_resume_both(udev); + if (status != 0) + udev->pm_usage_cnt -= inc_usage_cnt; + mutex_unlock(&udev->pm_mutex); + // dev_dbg(&udev->dev, "%s: status %d cnt %d\n", + // __FUNCTION__, status, udev->pm_usage_cnt); + return status; +} + +/** + * usb_autopm_put_interface - decrement a USB interface's PM-usage counter + * @intf - the usb_interface whose counter should be decremented + * + * This routine should be called by an interface driver when it is + * finished using @intf and wants to allow it to autosuspend. A typical + * example would be a character-device driver when its device file is + * closed. + * + * The routine decrements @intf's usage counter. When the counter reaches + * 0, a delayed autosuspend request for @intf's device is queued. When + * the delay expires, if @intf->pm_usage_cnt is still <= 0 along with all + * the other usage counters for the sibling interfaces and @intf's + * usb_device, the device and all its interfaces will be autosuspended. + * + * Note that @intf->pm_usage_cnt is owned by the interface driver. The + * core will not change its value other than the increment and decrement + * in usb_autopm_get_interface and usb_autopm_put_interface. The driver + * may use this simple counter-oriented discipline or may set the value + * any way it likes. + * + * If the driver has set @intf->needs_remote_wakeup then autosuspend will + * take place only if the device's remote-wakeup facility is enabled. + * + * Suspend method calls queued by this routine can arrive at any time + * while @intf is resumed and its usage counter is equal to 0. They are + * not protected by the usb_device's lock but only by its pm_mutex. + * Drivers must provide their own synchronization. + * + * This routine can run only in process context. + */ +void usb_autopm_put_interface(struct usb_interface *intf) +{ + struct usb_device *udev = interface_to_usbdev(intf); + + mutex_lock_nested(&udev->pm_mutex, udev->level); + if (intf->condition != USB_INTERFACE_UNBOUND) { + if (--intf->pm_usage_cnt <= 0) + schedule_delayed_work(&udev->autosuspend, + USB_AUTOSUSPEND_DELAY); + } + mutex_unlock(&udev->pm_mutex); + // dev_dbg(&intf->dev, "%s: cnt %d\n", + // __FUNCTION__, intf->pm_usage_cnt); +} +EXPORT_SYMBOL_GPL(usb_autopm_put_interface); + +/** + * usb_autopm_get_interface - increment a USB interface's PM-usage counter + * @intf - the usb_interface whose counter should be incremented + * + * This routine should be called by an interface driver when it wants to + * use @intf and needs to guarantee that it is not suspended. In addition, + * the routine prevents @intf from being autosuspended subsequently. (Note + * that this will not prevent suspend events originating in the PM core.) + * This prevention will persist until usb_autopm_put_interface() is called + * or @intf is unbound. A typical example would be a character-device + * driver when its device file is opened. + * + * The routine increments @intf's usage counter. So long as the counter + * is greater than 0, autosuspend will not be allowed for @intf or its + * usb_device. When the driver is finished using @intf it should call + * usb_autopm_put_interface() to decrement the usage counter and queue + * a delayed autosuspend request (if the counter is <= 0). + * + * Note that @intf->pm_usage_cnt is owned by the interface driver. The + * core will not change its value other than the increment and decrement + * in usb_autopm_get_interface and usb_autopm_put_interface. The driver + * may use this simple counter-oriented discipline or may set the value + * any way it likes. + * + * Resume method calls generated by this routine can arrive at any time + * while @intf is suspended. They are not protected by the usb_device's + * lock but only by its pm_mutex. Drivers must provide their own + * synchronization. + * + * This routine can run only in process context. + */ +int usb_autopm_get_interface(struct usb_interface *intf) +{ + struct usb_device *udev = interface_to_usbdev(intf); + int status; + + mutex_lock_nested(&udev->pm_mutex, udev->level); + if (intf->condition == USB_INTERFACE_UNBOUND) + status = -ENODEV; + else { + ++intf->pm_usage_cnt; + udev->auto_pm = 1; + status = usb_resume_both(udev); + if (status != 0) + --intf->pm_usage_cnt; + } + mutex_unlock(&udev->pm_mutex); + // dev_dbg(&intf->dev, "%s: status %d cnt %d\n", + // __FUNCTION__, status, intf->pm_usage_cnt); + return status; +} +EXPORT_SYMBOL_GPL(usb_autopm_get_interface); + +#endif /* CONFIG_USB_SUSPEND */ + +static int usb_suspend(struct device *dev, pm_message_t message) +{ + int status; + + if (is_usb_device(dev)) { + struct usb_device *udev = to_usb_device(dev); + + mutex_lock_nested(&udev->pm_mutex, udev->level); + udev->auto_pm = 0; + status = usb_suspend_both(udev, message); + mutex_unlock(&udev->pm_mutex); + } else + status = 0; + return status; +} + +static int usb_resume(struct device *dev) +{ + int status; + + if (is_usb_device(dev)) { + struct usb_device *udev = to_usb_device(dev); + + mutex_lock_nested(&udev->pm_mutex, udev->level); + udev->auto_pm = 0; + status = usb_resume_both(udev); + mutex_unlock(&udev->pm_mutex); + + /* Rebind drivers that had no suspend method? */ + } else + status = 0; + return status; +} + +#endif /* CONFIG_PM */ + +struct bus_type usb_bus_type = { + .name = "usb", + .match = usb_device_match, + .uevent = usb_uevent, +#ifdef CONFIG_PM + .suspend = usb_suspend, + .resume = usb_resume, +#endif +}; diff --git a/drivers/usb/core/endpoint.c b/drivers/usb/core/endpoint.c index 247b5a4913a..3ebb90149e9 100644 --- a/drivers/usb/core/endpoint.c +++ b/drivers/usb/core/endpoint.c @@ -207,9 +207,9 @@ static void ep_device_release(struct device *dev) kfree(ep_dev); } -void usb_create_ep_files(struct device *parent, - struct usb_host_endpoint *endpoint, - struct usb_device *udev) +int usb_create_ep_files(struct device *parent, + struct usb_host_endpoint *endpoint, + struct usb_device *udev) { char name[8]; struct ep_device *ep_dev; @@ -242,19 +242,33 @@ void usb_create_ep_files(struct device *parent, retval = device_register(&ep_dev->dev); if (retval) goto error; - sysfs_create_group(&ep_dev->dev.kobj, &ep_dev_attr_grp); + retval = sysfs_create_group(&ep_dev->dev.kobj, &ep_dev_attr_grp); + if (retval) + goto error_group; endpoint->ep_dev = ep_dev; /* create the symlink to the old-style "ep_XX" directory */ sprintf(name, "ep_%02x", endpoint->desc.bEndpointAddress); - sysfs_create_link(&parent->kobj, &endpoint->ep_dev->dev.kobj, name); - + retval = sysfs_create_link(&parent->kobj, + &endpoint->ep_dev->dev.kobj, name); + if (retval) + goto error_link; exit: - return; + return retval; + +error_link: + sysfs_remove_group(&ep_dev->dev.kobj, &ep_dev_attr_grp); + +error_group: + device_unregister(&ep_dev->dev); + endpoint->ep_dev = NULL; + destroy_endpoint_class(); + return retval; error: kfree(ep_dev); - return; + destroy_endpoint_class(); + return retval; } void usb_remove_ep_files(struct usb_host_endpoint *endpoint) diff --git a/drivers/usb/core/file.c b/drivers/usb/core/file.c index 8de4f8c99d6..c376c655c5d 100644 --- a/drivers/usb/core/file.c +++ b/drivers/usb/core/file.c @@ -55,7 +55,7 @@ static int usb_open(struct inode * inode, struct file * file) return err; } -static struct file_operations usb_fops = { +static const struct file_operations usb_fops = { .owner = THIS_MODULE, .open = usb_open, }; diff --git a/drivers/usb/core/generic.c b/drivers/usb/core/generic.c new file mode 100644 index 00000000000..16332cc5794 --- /dev/null +++ b/drivers/usb/core/generic.c @@ -0,0 +1,208 @@ +/* + * drivers/usb/generic.c - generic driver for USB devices (not interfaces) + * + * (C) Copyright 2005 Greg Kroah-Hartman <gregkh@suse.de> + * + * based on drivers/usb/usb.c which had the following copyrights: + * (C) Copyright Linus Torvalds 1999 + * (C) Copyright Johannes Erdfelt 1999-2001 + * (C) Copyright Andreas Gal 1999 + * (C) Copyright Gregory P. Smith 1999 + * (C) Copyright Deti Fliegl 1999 (new USB architecture) + * (C) Copyright Randy Dunlap 2000 + * (C) Copyright David Brownell 2000-2004 + * (C) Copyright Yggdrasil Computing, Inc. 2000 + * (usb_device_id matching changes by Adam J. Richter) + * (C) Copyright Greg Kroah-Hartman 2002-2003 + * + */ + +#include <linux/config.h> +#include <linux/usb.h> +#include "usb.h" + +static inline const char *plural(int n) +{ + return (n == 1 ? "" : "s"); +} + +static int choose_configuration(struct usb_device *udev) +{ + int i; + int num_configs; + int insufficient_power = 0; + struct usb_host_config *c, *best; + + best = NULL; + c = udev->config; + num_configs = udev->descriptor.bNumConfigurations; + for (i = 0; i < num_configs; (i++, c++)) { + struct usb_interface_descriptor *desc = NULL; + + /* It's possible that a config has no interfaces! */ + if (c->desc.bNumInterfaces > 0) + desc = &c->intf_cache[0]->altsetting->desc; + + /* + * HP's USB bus-powered keyboard has only one configuration + * and it claims to be self-powered; other devices may have + * similar errors in their descriptors. If the next test + * were allowed to execute, such configurations would always + * be rejected and the devices would not work as expected. + * In the meantime, we run the risk of selecting a config + * that requires external power at a time when that power + * isn't available. It seems to be the lesser of two evils. + * + * Bugzilla #6448 reports a device that appears to crash + * when it receives a GET_DEVICE_STATUS request! We don't + * have any other way to tell whether a device is self-powered, + * but since we don't use that information anywhere but here, + * the call has been removed. + * + * Maybe the GET_DEVICE_STATUS call and the test below can + * be reinstated when device firmwares become more reliable. + * Don't hold your breath. + */ +#if 0 + /* Rule out self-powered configs for a bus-powered device */ + if (bus_powered && (c->desc.bmAttributes & + USB_CONFIG_ATT_SELFPOWER)) + continue; +#endif + + /* + * The next test may not be as effective as it should be. + * Some hubs have errors in their descriptor, claiming + * to be self-powered when they are really bus-powered. + * We will overestimate the amount of current such hubs + * make available for each port. + * + * This is a fairly benign sort of failure. It won't + * cause us to reject configurations that we should have + * accepted. + */ + + /* Rule out configs that draw too much bus current */ + if (c->desc.bMaxPower * 2 > udev->bus_mA) { + insufficient_power++; + continue; + } + + /* If the first config's first interface is COMM/2/0xff + * (MSFT RNDIS), rule it out unless Linux has host-side + * RNDIS support. */ + if (i == 0 && desc + && desc->bInterfaceClass == USB_CLASS_COMM + && desc->bInterfaceSubClass == 2 + && desc->bInterfaceProtocol == 0xff) { +#ifndef CONFIG_USB_NET_RNDIS_HOST + continue; +#else + best = c; +#endif + } + + /* From the remaining configs, choose the first one whose + * first interface is for a non-vendor-specific class. + * Reason: Linux is more likely to have a class driver + * than a vendor-specific driver. */ + else if (udev->descriptor.bDeviceClass != + USB_CLASS_VENDOR_SPEC && + (!desc || desc->bInterfaceClass != + USB_CLASS_VENDOR_SPEC)) { + best = c; + break; + } + + /* If all the remaining configs are vendor-specific, + * choose the first one. */ + else if (!best) + best = c; + } + + if (insufficient_power > 0) + dev_info(&udev->dev, "rejected %d configuration%s " + "due to insufficient available bus power\n", + insufficient_power, plural(insufficient_power)); + + if (best) { + i = best->desc.bConfigurationValue; + dev_info(&udev->dev, + "configuration #%d chosen from %d choice%s\n", + i, num_configs, plural(num_configs)); + } else { + i = -1; + dev_warn(&udev->dev, + "no configuration chosen from %d choice%s\n", + num_configs, plural(num_configs)); + } + return i; +} + +static int generic_probe(struct usb_device *udev) +{ + int err, c; + + /* put device-specific files into sysfs */ + usb_create_sysfs_dev_files(udev); + + /* Choose and set the configuration. This registers the interfaces + * with the driver core and lets interface drivers bind to them. + */ + c = choose_configuration(udev); + if (c >= 0) { + err = usb_set_configuration(udev, c); + if (err) { + dev_err(&udev->dev, "can't set config #%d, error %d\n", + c, err); + /* This need not be fatal. The user can try to + * set other configurations. */ + } + } + + /* USB device state == configured ... usable */ + usb_notify_add_device(udev); + + return 0; +} + +static void generic_disconnect(struct usb_device *udev) +{ + usb_notify_remove_device(udev); + + /* if this is only an unbind, not a physical disconnect, then + * unconfigure the device */ + if (udev->actconfig) + usb_set_configuration(udev, 0); + + usb_remove_sysfs_dev_files(udev); +} + +#ifdef CONFIG_PM + +static int generic_suspend(struct usb_device *udev, pm_message_t msg) +{ + /* USB devices enter SUSPEND state through their hubs, but can be + * marked for FREEZE as soon as their children are already idled. + * But those semantics are useless, so we equate the two (sigh). + */ + return usb_port_suspend(udev); +} + +static int generic_resume(struct usb_device *udev) +{ + return usb_port_resume(udev); +} + +#endif /* CONFIG_PM */ + +struct usb_device_driver usb_generic_driver = { + .name = "usb", + .probe = generic_probe, + .disconnect = generic_disconnect, +#ifdef CONFIG_PM + .suspend = generic_suspend, + .resume = generic_resume, +#endif + .supports_autosuspend = 1, +}; diff --git a/drivers/usb/core/hcd-pci.c b/drivers/usb/core/hcd-pci.c index 5078fb3375e..edf4300a3f7 100644 --- a/drivers/usb/core/hcd-pci.c +++ b/drivers/usb/core/hcd-pci.c @@ -281,7 +281,7 @@ int usb_hcd_pci_suspend (struct pci_dev *dev, pm_message_t message) (void) usb_hcd_pci_resume (dev); } - } else { + } else if (hcd->state != HC_STATE_HALT) { dev_dbg (hcd->self.controller, "hcd state %d; not suspended\n", hcd->state); WARN_ON(1); @@ -413,4 +413,20 @@ EXPORT_SYMBOL (usb_hcd_pci_resume); #endif /* CONFIG_PM */ +/** + * usb_hcd_pci_shutdown - shutdown host controller + * @dev: USB Host Controller being shutdown + */ +void usb_hcd_pci_shutdown (struct pci_dev *dev) +{ + struct usb_hcd *hcd; + + hcd = pci_get_drvdata(dev); + if (!hcd) + return; + + if (hcd->driver->shutdown) + hcd->driver->shutdown(hcd); +} +EXPORT_SYMBOL (usb_hcd_pci_shutdown); diff --git a/drivers/usb/core/hcd.c b/drivers/usb/core/hcd.c index fb4d058bbde..e86f6295708 100644 --- a/drivers/usb/core/hcd.c +++ b/drivers/usb/core/hcd.c @@ -36,6 +36,7 @@ #include <linux/mutex.h> #include <asm/irq.h> #include <asm/byteorder.h> +#include <linux/platform_device.h> #include <linux/usb.h> @@ -632,31 +633,20 @@ static int rh_urb_enqueue (struct usb_hcd *hcd, struct urb *urb) /*-------------------------------------------------------------------------*/ -/* Asynchronous unlinks of root-hub control URBs are legal, but they - * don't do anything. Status URB unlinks must be made in process context - * with interrupts enabled. +/* Unlinks of root-hub control URBs are legal, but they don't do anything + * since these URBs always execute synchronously. */ static int usb_rh_urb_dequeue (struct usb_hcd *hcd, struct urb *urb) { - if (usb_pipeendpoint(urb->pipe) == 0) { /* Control URB */ - if (in_interrupt()) - return 0; /* nothing to do */ - - spin_lock_irq(&urb->lock); /* from usb_kill_urb */ - ++urb->reject; - spin_unlock_irq(&urb->lock); - - wait_event(usb_kill_urb_queue, - atomic_read(&urb->use_count) == 0); + unsigned long flags; - spin_lock_irq(&urb->lock); - --urb->reject; - spin_unlock_irq(&urb->lock); + if (usb_pipeendpoint(urb->pipe) == 0) { /* Control URB */ + ; /* Do nothing */ } else { /* Status URB */ if (!hcd->uses_new_polling) - del_timer_sync (&hcd->rh_timer); - local_irq_disable (); + del_timer (&hcd->rh_timer); + local_irq_save (flags); spin_lock (&hcd_root_hub_lock); if (urb == hcd->status_urb) { hcd->status_urb = NULL; @@ -666,7 +656,7 @@ static int usb_rh_urb_dequeue (struct usb_hcd *hcd, struct urb *urb) spin_unlock (&hcd_root_hub_lock); if (urb) usb_hcd_giveback_urb (hcd, urb, NULL); - local_irq_enable (); + local_irq_restore (flags); } return 0; @@ -674,31 +664,6 @@ static int usb_rh_urb_dequeue (struct usb_hcd *hcd, struct urb *urb) /*-------------------------------------------------------------------------*/ -/* exported only within usbcore */ -struct usb_bus *usb_bus_get(struct usb_bus *bus) -{ - if (bus) - kref_get(&bus->kref); - return bus; -} - -static void usb_host_release(struct kref *kref) -{ - struct usb_bus *bus = container_of(kref, struct usb_bus, kref); - - if (bus->release) - bus->release(bus); -} - -/* exported only within usbcore */ -void usb_bus_put(struct usb_bus *bus) -{ - if (bus) - kref_put(&bus->kref, usb_host_release); -} - -/*-------------------------------------------------------------------------*/ - static struct class *usb_host_class; int usb_host_init(void) @@ -730,39 +695,12 @@ static void usb_bus_init (struct usb_bus *bus) bus->devnum_next = 1; bus->root_hub = NULL; - bus->hcpriv = NULL; bus->busnum = -1; bus->bandwidth_allocated = 0; bus->bandwidth_int_reqs = 0; bus->bandwidth_isoc_reqs = 0; INIT_LIST_HEAD (&bus->bus_list); - - kref_init(&bus->kref); -} - -/** - * usb_alloc_bus - creates a new USB host controller structure - * @op: pointer to a struct usb_operations that this bus structure should use - * Context: !in_interrupt() - * - * Creates a USB host controller bus structure with the specified - * usb_operations and initializes all the necessary internal objects. - * - * If no memory is available, NULL is returned. - * - * The caller should call usb_put_bus() when it is finished with the structure. - */ -struct usb_bus *usb_alloc_bus (struct usb_operations *op) -{ - struct usb_bus *bus; - - bus = kzalloc (sizeof *bus, GFP_KERNEL); - if (!bus) - return NULL; - usb_bus_init (bus); - bus->op = op; - return bus; } /*-------------------------------------------------------------------------*/ @@ -1112,10 +1050,10 @@ static void urb_unlink (struct urb *urb) * expects usb_submit_urb() to have sanity checked and conditioned all * inputs in the urb */ -static int hcd_submit_urb (struct urb *urb, gfp_t mem_flags) +int usb_hcd_submit_urb (struct urb *urb, gfp_t mem_flags) { int status; - struct usb_hcd *hcd = urb->dev->bus->hcpriv; + struct usb_hcd *hcd = bus_to_hcd(urb->dev->bus); struct usb_host_endpoint *ep; unsigned long flags; @@ -1186,7 +1124,7 @@ doit: /* lower level hcd code should use *_dma exclusively, * unless it uses pio or talks to another transport. */ - if (hcd->self.controller->dma_mask) { + if (hcd->self.uses_dma) { if (usb_pipecontrol (urb->pipe) && !(urb->transfer_flags & URB_NO_SETUP_DMA_MAP)) urb->setup_dma = dma_map_single ( @@ -1221,9 +1159,10 @@ done: /*-------------------------------------------------------------------------*/ /* called in any context */ -static int hcd_get_frame_number (struct usb_device *udev) +int usb_hcd_get_frame_number (struct usb_device *udev) { - struct usb_hcd *hcd = (struct usb_hcd *)udev->bus->hcpriv; + struct usb_hcd *hcd = bus_to_hcd(udev->bus); + if (!HC_IS_RUNNING (hcd->state)) return -ESHUTDOWN; return hcd->driver->get_frame_number (hcd); @@ -1263,7 +1202,7 @@ unlink1 (struct usb_hcd *hcd, struct urb *urb) * caller guarantees urb won't be recycled till both unlink() * and the urb's completion function return */ -static int hcd_unlink_urb (struct urb *urb, int status) +int usb_hcd_unlink_urb (struct urb *urb, int status) { struct usb_host_endpoint *ep; struct usb_hcd *hcd = NULL; @@ -1296,7 +1235,7 @@ static int hcd_unlink_urb (struct urb *urb, int status) spin_lock (&hcd_data_lock); sys = &urb->dev->dev; - hcd = urb->dev->bus->hcpriv; + hcd = bus_to_hcd(urb->dev->bus); if (hcd == NULL) { retval = -ENODEV; goto done; @@ -1354,41 +1293,33 @@ done: /*-------------------------------------------------------------------------*/ /* disables the endpoint: cancels any pending urbs, then synchronizes with - * the hcd to make sure all endpoint state is gone from hardware. use for + * the hcd to make sure all endpoint state is gone from hardware, and then + * waits until the endpoint's queue is completely drained. use for * set_configuration, set_interface, driver removal, physical disconnect. * * example: a qh stored in ep->hcpriv, holding state related to endpoint * type, maxpacket size, toggle, halt status, and scheduling. */ -static void -hcd_endpoint_disable (struct usb_device *udev, struct usb_host_endpoint *ep) +void usb_hcd_endpoint_disable (struct usb_device *udev, + struct usb_host_endpoint *ep) { struct usb_hcd *hcd; struct urb *urb; - hcd = udev->bus->hcpriv; + hcd = bus_to_hcd(udev->bus); WARN_ON (!HC_IS_RUNNING (hcd->state) && hcd->state != HC_STATE_HALT && udev->state != USB_STATE_NOTATTACHED); local_irq_disable (); - /* FIXME move most of this into message.c as part of its - * endpoint disable logic - */ - /* ep is already gone from udev->ep_{in,out}[]; no more submits */ rescan: spin_lock (&hcd_data_lock); list_for_each_entry (urb, &ep->urb_list, urb_list) { int tmp; - /* another cpu may be in hcd, spinning on hcd_data_lock - * to giveback() this urb. the races here should be - * small, but a full fix needs a new "can't submit" - * urb state. - * FIXME urb->reject should allow that... - */ + /* the urb may already have been unlinked */ if (urb->status != -EINPROGRESS) continue; usb_get_urb (urb); @@ -1430,6 +1361,30 @@ rescan: might_sleep (); if (hcd->driver->endpoint_disable) hcd->driver->endpoint_disable (hcd, ep); + + /* Wait until the endpoint queue is completely empty. Most HCDs + * will have done this already in their endpoint_disable method, + * but some might not. And there could be root-hub control URBs + * still pending since they aren't affected by the HCDs' + * endpoint_disable methods. + */ + while (!list_empty (&ep->urb_list)) { + spin_lock_irq (&hcd_data_lock); + + /* The list may have changed while we acquired the spinlock */ + urb = NULL; + if (!list_empty (&ep->urb_list)) { + urb = list_entry (ep->urb_list.prev, struct urb, + urb_list); + usb_get_urb (urb); + } + spin_unlock_irq (&hcd_data_lock); + + if (urb) { + usb_kill_urb (urb); + usb_put_urb (urb); + } + } } /*-------------------------------------------------------------------------*/ @@ -1476,50 +1431,6 @@ int hcd_bus_resume (struct usb_bus *bus) return status; } -/* - * usb_hcd_suspend_root_hub - HCD autosuspends downstream ports - * @hcd: host controller for this root hub - * - * This call arranges that usb_hcd_resume_root_hub() is safe to call later; - * that the HCD's root hub polling is deactivated; and that the root's hub - * driver is suspended. HCDs may call this to autosuspend when their root - * hub's downstream ports are all inactive: unpowered, disconnected, - * disabled, or suspended. - * - * The HCD will autoresume on device connect change detection (using SRP - * or a D+/D- pullup). The HCD also autoresumes on remote wakeup signaling - * from any ports that are suspended (if that is enabled). In most cases, - * overcurrent signaling (on powered ports) will also start autoresume. - * - * Always called with IRQs blocked. - */ -void usb_hcd_suspend_root_hub (struct usb_hcd *hcd) -{ - struct urb *urb; - - spin_lock (&hcd_root_hub_lock); - usb_suspend_root_hub (hcd->self.root_hub); - - /* force status urb to complete/unlink while suspended */ - if (hcd->status_urb) { - urb = hcd->status_urb; - urb->status = -ECONNRESET; - urb->hcpriv = NULL; - urb->actual_length = 0; - - del_timer (&hcd->rh_timer); - hcd->poll_pending = 0; - hcd->status_urb = NULL; - } else - urb = NULL; - spin_unlock (&hcd_root_hub_lock); - hcd->state = HC_STATE_SUSPENDED; - - if (urb) - usb_hcd_giveback_urb (hcd, urb, NULL); -} -EXPORT_SYMBOL_GPL(usb_hcd_suspend_root_hub); - /** * usb_hcd_resume_root_hub - called by HCD to resume its root hub * @hcd: host controller for this root hub @@ -1583,20 +1494,6 @@ EXPORT_SYMBOL (usb_bus_start_enum); /*-------------------------------------------------------------------------*/ -/* - * usb_hcd_operations - adapts usb_bus framework to HCD framework (bus glue) - */ -static struct usb_operations usb_hcd_operations = { - .get_frame_number = hcd_get_frame_number, - .submit_urb = hcd_submit_urb, - .unlink_urb = hcd_unlink_urb, - .buffer_alloc = hcd_buffer_alloc, - .buffer_free = hcd_buffer_free, - .disable = hcd_endpoint_disable, -}; - -/*-------------------------------------------------------------------------*/ - /** * usb_hcd_giveback_urb - return URB from HCD to device driver * @hcd: host controller returning the URB @@ -1617,8 +1514,9 @@ void usb_hcd_giveback_urb (struct usb_hcd *hcd, struct urb *urb, struct pt_regs at_root_hub = (urb->dev == hcd->self.root_hub); urb_unlink (urb); - /* lower level hcd code should use *_dma exclusively */ - if (hcd->self.controller->dma_mask && !at_root_hub) { + /* lower level hcd code should use *_dma exclusively if the + * host controller does DMA */ + if (hcd->self.uses_dma && !at_root_hub) { if (usb_pipecontrol (urb->pipe) && !(urb->transfer_flags & URB_NO_SETUP_DMA_MAP)) dma_unmap_single (hcd->self.controller, urb->setup_dma, @@ -1704,14 +1602,6 @@ EXPORT_SYMBOL_GPL (usb_hc_died); /*-------------------------------------------------------------------------*/ -static void hcd_release (struct usb_bus *bus) -{ - struct usb_hcd *hcd; - - hcd = container_of(bus, struct usb_hcd, self); - kfree(hcd); -} - /** * usb_create_hcd - create and initialize an HCD structure * @driver: HC driver that will use this hcd @@ -1736,13 +1626,12 @@ struct usb_hcd *usb_create_hcd (const struct hc_driver *driver, return NULL; } dev_set_drvdata(dev, hcd); + kref_init(&hcd->kref); usb_bus_init(&hcd->self); - hcd->self.op = &usb_hcd_operations; - hcd->self.hcpriv = hcd; - hcd->self.release = &hcd_release; hcd->self.controller = dev; hcd->self.bus_name = bus_name; + hcd->self.uses_dma = (dev->dma_mask != NULL); init_timer(&hcd->rh_timer); hcd->rh_timer.function = rh_timer_func; @@ -1756,10 +1645,25 @@ struct usb_hcd *usb_create_hcd (const struct hc_driver *driver, } EXPORT_SYMBOL (usb_create_hcd); +static void hcd_release (struct kref *kref) +{ + struct usb_hcd *hcd = container_of (kref, struct usb_hcd, kref); + + kfree(hcd); +} + +struct usb_hcd *usb_get_hcd (struct usb_hcd *hcd) +{ + if (hcd) + kref_get (&hcd->kref); + return hcd; +} +EXPORT_SYMBOL (usb_get_hcd); + void usb_put_hcd (struct usb_hcd *hcd) { - dev_set_drvdata(hcd->self.controller, NULL); - usb_bus_put(&hcd->self); + if (hcd) + kref_put (&hcd->kref, hcd_release); } EXPORT_SYMBOL (usb_put_hcd); @@ -1915,6 +1819,16 @@ void usb_remove_hcd(struct usb_hcd *hcd) } EXPORT_SYMBOL (usb_remove_hcd); +void +usb_hcd_platform_shutdown(struct platform_device* dev) +{ + struct usb_hcd *hcd = platform_get_drvdata(dev); + + if (hcd->driver->shutdown) + hcd->driver->shutdown(hcd); +} +EXPORT_SYMBOL (usb_hcd_platform_shutdown); + /*-------------------------------------------------------------------------*/ #if defined(CONFIG_USB_MON) diff --git a/drivers/usb/core/hcd.h b/drivers/usb/core/hcd.h index 7022aafb2ae..676877c15f8 100644 --- a/drivers/usb/core/hcd.h +++ b/drivers/usb/core/hcd.h @@ -55,12 +55,13 @@ /*-------------------------------------------------------------------------*/ -struct usb_hcd { /* usb_bus.hcpriv points to this */ +struct usb_hcd { /* * housekeeping */ struct usb_bus self; /* hcd is-a bus */ + struct kref kref; /* reference counter */ const char *product_desc; /* product/vendor string */ char irq_descr[24]; /* driver + bus # */ @@ -85,6 +86,7 @@ struct usb_hcd { /* usb_bus.hcpriv points to this */ unsigned uses_new_polling:1; unsigned poll_rh:1; /* poll for rh status? */ unsigned poll_pending:1; /* status has changed? */ + unsigned wireless:1; /* Wireless USB HCD */ int irq; /* irq allocated */ void __iomem *regs; /* device memory/io */ @@ -128,8 +130,10 @@ static inline struct usb_bus *hcd_to_bus (struct usb_hcd *hcd) return &hcd->self; } - -// urb.hcpriv is really hardware-specific +static inline struct usb_hcd *bus_to_hcd (struct usb_bus *bus) +{ + return container_of(bus, struct usb_hcd, self); +} struct hcd_timeout { /* timeouts we allocate */ struct list_head timeout_list; @@ -138,28 +142,6 @@ struct hcd_timeout { /* timeouts we allocate */ /*-------------------------------------------------------------------------*/ -/* - * FIXME usb_operations should vanish or become hc_driver, - * when usb_bus and usb_hcd become the same thing. - */ - -struct usb_operations { - int (*get_frame_number) (struct usb_device *usb_dev); - int (*submit_urb) (struct urb *urb, gfp_t mem_flags); - int (*unlink_urb) (struct urb *urb, int status); - - /* allocate dma-consistent buffer for URB_DMA_NOMAPPING */ - void *(*buffer_alloc)(struct usb_bus *bus, size_t size, - gfp_t mem_flags, - dma_addr_t *dma); - void (*buffer_free)(struct usb_bus *bus, size_t size, - void *addr, dma_addr_t dma); - - void (*disable)(struct usb_device *udev, - struct usb_host_endpoint *ep); -}; - -/* each driver provides one of these, and hardware init support */ struct pt_regs; @@ -192,6 +174,9 @@ struct hc_driver { /* cleanly make HCD stop writing memory and doing I/O */ void (*stop) (struct usb_hcd *hcd); + /* shutdown HCD */ + void (*shutdown) (struct usb_hcd *hcd); + /* return current frame number */ int (*get_frame_number) (struct usb_hcd *hcd); @@ -218,15 +203,25 @@ struct hc_driver { /* Needed only if port-change IRQs are level-triggered */ }; -extern void usb_hcd_giveback_urb (struct usb_hcd *hcd, struct urb *urb, struct pt_regs *regs); +extern int usb_hcd_submit_urb (struct urb *urb, gfp_t mem_flags); +extern int usb_hcd_unlink_urb (struct urb *urb, int status); +extern void usb_hcd_giveback_urb (struct usb_hcd *hcd, struct urb *urb, + struct pt_regs *regs); +extern void usb_hcd_endpoint_disable (struct usb_device *udev, + struct usb_host_endpoint *ep); +extern int usb_hcd_get_frame_number (struct usb_device *udev); extern struct usb_hcd *usb_create_hcd (const struct hc_driver *driver, struct device *dev, char *bus_name); +extern struct usb_hcd *usb_get_hcd (struct usb_hcd *hcd); extern void usb_put_hcd (struct usb_hcd *hcd); extern int usb_add_hcd(struct usb_hcd *hcd, unsigned int irqnum, unsigned long irqflags); extern void usb_remove_hcd(struct usb_hcd *hcd); +struct platform_device; +extern void usb_hcd_platform_shutdown(struct platform_device* dev); + #ifdef CONFIG_PCI struct pci_dev; struct pci_device_id; @@ -239,6 +234,8 @@ extern int usb_hcd_pci_suspend (struct pci_dev *dev, pm_message_t state); extern int usb_hcd_pci_resume (struct pci_dev *dev); #endif /* CONFIG_PM */ +extern void usb_hcd_pci_shutdown (struct pci_dev *dev); + #endif /* CONFIG_PCI */ /* pci-ish (pdev null is ok) buffer alloc/mapping support */ @@ -352,8 +349,6 @@ extern long usb_calc_bus_time (int speed, int is_input, /*-------------------------------------------------------------------------*/ -extern struct usb_bus *usb_alloc_bus (struct usb_operations *); - extern void usb_set_device_state(struct usb_device *udev, enum usb_device_state new_state); @@ -365,9 +360,6 @@ extern struct list_head usb_bus_list; extern struct mutex usb_bus_list_lock; extern wait_queue_head_t usb_kill_urb_queue; -extern struct usb_bus *usb_bus_get (struct usb_bus *bus); -extern void usb_bus_put (struct usb_bus *bus); - extern void usb_enable_root_hub_irq (struct usb_bus *bus); extern int usb_find_interface_driver (struct usb_device *dev, @@ -376,17 +368,11 @@ extern int usb_find_interface_driver (struct usb_device *dev, #define usb_endpoint_out(ep_dir) (!((ep_dir) & USB_DIR_IN)) #ifdef CONFIG_PM -extern void usb_hcd_suspend_root_hub (struct usb_hcd *hcd); extern void usb_hcd_resume_root_hub (struct usb_hcd *hcd); extern void usb_root_hub_lost_power (struct usb_device *rhdev); extern int hcd_bus_suspend (struct usb_bus *bus); extern int hcd_bus_resume (struct usb_bus *bus); #else -static inline void usb_hcd_suspend_root_hub(struct usb_hcd *hcd) -{ - return; -} - static inline void usb_hcd_resume_root_hub(struct usb_hcd *hcd) { return; diff --git a/drivers/usb/core/hub.c b/drivers/usb/core/hub.c index 26c8cb5f3e6..2a8cb3c2b19 100644 --- a/drivers/usb/core/hub.c +++ b/drivers/usb/core/hub.c @@ -293,7 +293,7 @@ void usb_kick_khubd(struct usb_device *hdev) /* completion function, fires on port status changes and various faults */ static void hub_irq(struct urb *urb, struct pt_regs *regs) { - struct usb_hub *hub = (struct usb_hub *)urb->context; + struct usb_hub *hub = urb->context; int status; int i; unsigned long bits; @@ -311,7 +311,7 @@ static void hub_irq(struct urb *urb, struct pt_regs *regs) goto resubmit; hub->error = urb->status; /* FALL THROUGH */ - + /* let khubd handle things */ case 0: /* we got data: port status changed */ bits = 0; @@ -452,18 +452,14 @@ static void hub_power_on(struct usb_hub *hub) msleep(max(pgood_delay, (unsigned) 100)); } -static inline void __hub_quiesce(struct usb_hub *hub) +static void hub_quiesce(struct usb_hub *hub) { /* (nonblocking) khubd and related activity won't re-trigger */ hub->quiescing = 1; hub->activating = 0; hub->resume_root_hub = 0; -} -static void hub_quiesce(struct usb_hub *hub) -{ /* (blocking) stop khubd and related activity */ - __hub_quiesce(hub); usb_kill_urb(hub->urb); if (hub->has_indicators) cancel_delayed_work(&hub->leds); @@ -868,13 +864,8 @@ descriptor_error: endpoint = &desc->endpoint[0].desc; - /* Output endpoint? Curiouser and curiouser.. */ - if (!(endpoint->bEndpointAddress & USB_DIR_IN)) - goto descriptor_error; - - /* If it's not an interrupt endpoint, we'd better punt! */ - if ((endpoint->bmAttributes & USB_ENDPOINT_XFERTYPE_MASK) - != USB_ENDPOINT_XFER_INT) + /* If it's not an interrupt in endpoint, we'd better punt! */ + if (!usb_endpoint_is_int_in(endpoint)) goto descriptor_error; /* We found a hub */ @@ -1022,26 +1013,29 @@ void usb_set_device_state(struct usb_device *udev, if (udev->state == USB_STATE_NOTATTACHED) ; /* do nothing */ else if (new_state != USB_STATE_NOTATTACHED) { - udev->state = new_state; /* root hub wakeup capabilities are managed out-of-band * and may involve silicon errata ... ignore them here. */ if (udev->parent) { - if (new_state == USB_STATE_CONFIGURED) + if (udev->state == USB_STATE_SUSPENDED + || new_state == USB_STATE_SUSPENDED) + ; /* No change to wakeup settings */ + else if (new_state == USB_STATE_CONFIGURED) device_init_wakeup(&udev->dev, (udev->actconfig->desc.bmAttributes & USB_CONFIG_ATT_WAKEUP)); - else if (new_state != USB_STATE_SUSPENDED) + else device_init_wakeup(&udev->dev, 0); } + udev->state = new_state; } else recursively_mark_NOTATTACHED(udev); spin_unlock_irqrestore(&device_state_lock, flags); } -#ifdef CONFIG_PM +#ifdef CONFIG_PM /** * usb_root_hub_lost_power - called by HCD if the root hub lost Vbus power @@ -1059,6 +1053,12 @@ void usb_root_hub_lost_power(struct usb_device *rhdev) unsigned long flags; dev_warn(&rhdev->dev, "root hub lost power or was reset\n"); + + /* Make sure no potential wakeup events get lost, + * by forcing the root hub to be resumed. + */ + rhdev->dev.power.prev_state.event = PM_EVENT_ON; + spin_lock_irqsave(&device_state_lock, flags); hub = hdev_to_hub(rhdev); for (port1 = 1; port1 <= rhdev->maxchild; ++port1) { @@ -1072,7 +1072,7 @@ void usb_root_hub_lost_power(struct usb_device *rhdev) } EXPORT_SYMBOL_GPL(usb_root_hub_lost_power); -#endif +#endif /* CONFIG_PM */ static void choose_address(struct usb_device *udev) { @@ -1148,144 +1148,28 @@ void usb_disconnect(struct usb_device **pdev) * cleaning up all state associated with the current configuration * so that the hardware is now fully quiesced. */ + dev_dbg (&udev->dev, "unregistering device\n"); usb_disable_device(udev, 0); - usb_notify_remove_device(udev); + usb_unlock_device(udev); - /* Free the device number, remove the /proc/bus/usb entry and - * the sysfs attributes, and delete the parent's children[] + /* Unregister the device. The device driver is responsible + * for removing the device files from usbfs and sysfs and for + * de-configuring the device. + */ + device_del(&udev->dev); + + /* Free the device number and delete the parent's children[] * (or root_hub) pointer. */ - dev_dbg (&udev->dev, "unregistering device\n"); release_address(udev); - usb_remove_sysfs_dev_files(udev); /* Avoid races with recursively_mark_NOTATTACHED() */ spin_lock_irq(&device_state_lock); *pdev = NULL; spin_unlock_irq(&device_state_lock); - usb_unlock_device(udev); - - device_unregister(&udev->dev); -} - -static inline const char *plural(int n) -{ - return (n == 1 ? "" : "s"); -} - -static int choose_configuration(struct usb_device *udev) -{ - int i; - int num_configs; - int insufficient_power = 0; - struct usb_host_config *c, *best; - - best = NULL; - c = udev->config; - num_configs = udev->descriptor.bNumConfigurations; - for (i = 0; i < num_configs; (i++, c++)) { - struct usb_interface_descriptor *desc = NULL; - - /* It's possible that a config has no interfaces! */ - if (c->desc.bNumInterfaces > 0) - desc = &c->intf_cache[0]->altsetting->desc; - - /* - * HP's USB bus-powered keyboard has only one configuration - * and it claims to be self-powered; other devices may have - * similar errors in their descriptors. If the next test - * were allowed to execute, such configurations would always - * be rejected and the devices would not work as expected. - * In the meantime, we run the risk of selecting a config - * that requires external power at a time when that power - * isn't available. It seems to be the lesser of two evils. - * - * Bugzilla #6448 reports a device that appears to crash - * when it receives a GET_DEVICE_STATUS request! We don't - * have any other way to tell whether a device is self-powered, - * but since we don't use that information anywhere but here, - * the call has been removed. - * - * Maybe the GET_DEVICE_STATUS call and the test below can - * be reinstated when device firmwares become more reliable. - * Don't hold your breath. - */ -#if 0 - /* Rule out self-powered configs for a bus-powered device */ - if (bus_powered && (c->desc.bmAttributes & - USB_CONFIG_ATT_SELFPOWER)) - continue; -#endif - - /* - * The next test may not be as effective as it should be. - * Some hubs have errors in their descriptor, claiming - * to be self-powered when they are really bus-powered. - * We will overestimate the amount of current such hubs - * make available for each port. - * - * This is a fairly benign sort of failure. It won't - * cause us to reject configurations that we should have - * accepted. - */ - - /* Rule out configs that draw too much bus current */ - if (c->desc.bMaxPower * 2 > udev->bus_mA) { - insufficient_power++; - continue; - } - - /* If the first config's first interface is COMM/2/0xff - * (MSFT RNDIS), rule it out unless Linux has host-side - * RNDIS support. */ - if (i == 0 && desc - && desc->bInterfaceClass == USB_CLASS_COMM - && desc->bInterfaceSubClass == 2 - && desc->bInterfaceProtocol == 0xff) { -#ifndef CONFIG_USB_NET_RNDIS_HOST - continue; -#else - best = c; -#endif - } - - /* From the remaining configs, choose the first one whose - * first interface is for a non-vendor-specific class. - * Reason: Linux is more likely to have a class driver - * than a vendor-specific driver. */ - else if (udev->descriptor.bDeviceClass != - USB_CLASS_VENDOR_SPEC && - (!desc || desc->bInterfaceClass != - USB_CLASS_VENDOR_SPEC)) { - best = c; - break; - } - - /* If all the remaining configs are vendor-specific, - * choose the first one. */ - else if (!best) - best = c; - } - - if (insufficient_power > 0) - dev_info(&udev->dev, "rejected %d configuration%s " - "due to insufficient available bus power\n", - insufficient_power, plural(insufficient_power)); - - if (best) { - i = best->desc.bConfigurationValue; - dev_info(&udev->dev, - "configuration #%d chosen from %d choice%s\n", - i, num_configs, plural(num_configs)); - } else { - i = -1; - dev_warn(&udev->dev, - "no configuration chosen from %d choice%s\n", - num_configs, plural(num_configs)); - } - return i; + put_device(&udev->dev); } #ifdef DEBUG @@ -1328,7 +1212,6 @@ static inline void show_string(struct usb_device *udev, char *id, char *string) int usb_new_device(struct usb_device *udev) { int err; - int c; err = usb_get_configuration(udev); if (err < 0) { @@ -1371,8 +1254,7 @@ int usb_new_device(struct usb_device *udev) USB_DT_OTG, (void **) &desc) == 0) { if (desc->bmAttributes & USB_OTG_HNP) { unsigned port1 = udev->portnum; - struct usb_device *root = udev->parent; - + dev_info(&udev->dev, "Dual-Role OTG device on %sHNP port\n", (port1 == bus->otg_port) @@ -1407,9 +1289,9 @@ int usb_new_device(struct usb_device *udev) * (Includes HNP test device.) */ if (udev->bus->b_hnp_enable || udev->bus->is_b_host) { - static int __usb_suspend_device(struct usb_device *, + static int __usb_port_suspend(struct usb_device *, int port1); - err = __usb_suspend_device(udev, udev->bus->otg_port); + err = __usb_port_suspend(udev, udev->bus->otg_port); if (err < 0) dev_dbg(&udev->dev, "HNP fail, %d\n", err); } @@ -1418,34 +1300,15 @@ int usb_new_device(struct usb_device *udev) } #endif - /* put device-specific files into sysfs */ + /* Register the device. The device driver is responsible + * for adding the device files to usbfs and sysfs and for + * configuring the device. + */ err = device_add (&udev->dev); if (err) { dev_err(&udev->dev, "can't device_add, error %d\n", err); goto fail; } - usb_create_sysfs_dev_files (udev); - - usb_lock_device(udev); - - /* choose and set the configuration. that registers the interfaces - * with the driver core, and lets usb device drivers bind to them. - */ - c = choose_configuration(udev); - if (c >= 0) { - err = usb_set_configuration(udev, c); - if (err) { - dev_err(&udev->dev, "can't set config #%d, error %d\n", - c, err); - /* This need not be fatal. The user can try to - * set other configurations. */ - } - } - - /* USB device state == configured ... usable */ - usb_notify_add_device(udev); - - usb_unlock_device(udev); return 0; @@ -1472,6 +1335,18 @@ static int hub_port_status(struct usb_hub *hub, int port1, return ret; } + +/* Returns 1 if @hub is a WUSB root hub, 0 otherwise */ +static unsigned hub_is_wusb(struct usb_hub *hub) +{ + struct usb_hcd *hcd; + if (hub->hdev->parent != NULL) /* not a root hub? */ + return 0; + hcd = container_of(hub->hdev->bus, struct usb_hcd, self); + return hcd->wireless; +} + + #define PORT_RESET_TRIES 5 #define SET_ADDRESS_TRIES 2 #define GET_DESCRIPTOR_TRIES 2 @@ -1512,7 +1387,9 @@ static int hub_port_wait_reset(struct usb_hub *hub, int port1, /* if we`ve finished resetting, then break out of the loop */ if (!(portstatus & USB_PORT_STAT_RESET) && (portstatus & USB_PORT_STAT_ENABLE)) { - if (portstatus & USB_PORT_STAT_HIGH_SPEED) + if (hub_is_wusb(hub)) + udev->speed = USB_SPEED_VARIABLE; + else if (portstatus & USB_PORT_STAT_HIGH_SPEED) udev->speed = USB_SPEED_HIGH; else if (portstatus & USB_PORT_STAT_LOW_SPEED) udev->speed = USB_SPEED_LOW; @@ -1607,6 +1484,7 @@ static void hub_port_logical_disconnect(struct usb_hub *hub, int port1) kick_khubd(hub); } +#ifdef CONFIG_PM #ifdef CONFIG_USB_SUSPEND @@ -1633,7 +1511,7 @@ static int hub_port_suspend(struct usb_hub *hub, int port1, * NOTE: OTG devices may issue remote wakeup (or SRP) even when * we don't explicitly enable it here. */ - if (device_may_wakeup(&udev->dev)) { + if (udev->do_remote_wakeup) { status = usb_control_msg(udev, usb_sndctrlpipe(udev, 0), USB_REQ_SET_FEATURE, USB_RECIP_DEVICE, USB_DEVICE_REMOTE_WAKEUP, 0, @@ -1659,7 +1537,8 @@ static int hub_port_suspend(struct usb_hub *hub, int port1, USB_CTRL_SET_TIMEOUT); } else { /* device has up to 10 msec to fully suspend */ - dev_dbg(&udev->dev, "usb suspend\n"); + dev_dbg(&udev->dev, "usb %ssuspend\n", + udev->auto_pm ? "auto-" : ""); usb_set_device_state(udev, USB_STATE_SUSPENDED); msleep(10); } @@ -1684,7 +1563,7 @@ static int hub_port_suspend(struct usb_hub *hub, int port1, * the root hub for their bus goes into global suspend ... so we don't * (falsely) update the device power state to say it suspended. */ -static int __usb_suspend_device (struct usb_device *udev, int port1) +static int __usb_port_suspend (struct usb_device *udev, int port1) { int status = 0; @@ -1692,49 +1571,29 @@ static int __usb_suspend_device (struct usb_device *udev, int port1) if (port1 < 0) return port1; - if (udev->state == USB_STATE_SUSPENDED - || udev->state == USB_STATE_NOTATTACHED) { - return 0; - } - - /* all interfaces must already be suspended */ - if (udev->actconfig) { - int i; - - for (i = 0; i < udev->actconfig->desc.bNumInterfaces; i++) { - struct usb_interface *intf; - - intf = udev->actconfig->interface[i]; - if (is_active(intf)) { - dev_dbg(&intf->dev, "nyet suspended\n"); - return -EBUSY; - } - } - } - - /* we only change a device's upstream USB link. - * root hubs have no upstream USB link. + /* we change the device's upstream USB link, + * but root hubs have no upstream USB link. */ if (udev->parent) status = hub_port_suspend(hdev_to_hub(udev->parent), port1, udev); - - if (status == 0) - udev->dev.power.power_state = PMSG_SUSPEND; + else { + dev_dbg(&udev->dev, "usb %ssuspend\n", + udev->auto_pm ? "auto-" : ""); + usb_set_device_state(udev, USB_STATE_SUSPENDED); + } return status; } -#endif - /* - * usb_suspend_device - suspend a usb device + * usb_port_suspend - suspend a usb device's upstream port * @udev: device that's no longer in active use * Context: must be able to sleep; device not locked; pm locks held * * Suspends a USB device that isn't in active use, conserving power. * Devices may wake out of a suspend, if anything important happens, * using the remote wakeup mechanism. They may also be taken out of - * suspend by the host, using usb_resume_device(). It's also routine + * suspend by the host, using usb_port_resume(). It's also routine * to disconnect devices while they are suspended. * * This only affects the USB hardware for a device; its interfaces @@ -1746,17 +1605,9 @@ static int __usb_suspend_device (struct usb_device *udev, int port1) * * Returns 0 on success, else negative errno. */ -int usb_suspend_device(struct usb_device *udev) +int usb_port_suspend(struct usb_device *udev) { -#ifdef CONFIG_USB_SUSPEND - if (udev->state == USB_STATE_NOTATTACHED) - return -ENODEV; - return __usb_suspend_device(udev, udev->portnum); -#else - /* NOTE: udev->state unchanged, it's not lying ... */ - udev->dev.power.power_state = PMSG_SUSPEND; - return 0; -#endif + return __usb_port_suspend(udev, udev->portnum); } /* @@ -1767,7 +1618,7 @@ int usb_suspend_device(struct usb_device *udev) * resume (by host) or remote wakeup (by device) ... now see what changed * in the tree that's rooted at this device. */ -static int finish_device_resume(struct usb_device *udev) +static int finish_port_resume(struct usb_device *udev) { int status; u16 devstatus; @@ -1783,7 +1634,6 @@ static int finish_device_resume(struct usb_device *udev) usb_set_device_state(udev, udev->actconfig ? USB_STATE_CONFIGURED : USB_STATE_ADDRESS); - udev->dev.power.power_state = PMSG_ON; /* 10.5.4.5 says be sure devices in the tree are still there. * For now let's assume the device didn't go crazy on resume, @@ -1798,9 +1648,6 @@ static int finish_device_resume(struct usb_device *udev) "gone after usb resume? status %d\n", status); else if (udev->actconfig) { - unsigned i; - int (*resume)(struct device *); - le16_to_cpus(&devstatus); if ((devstatus & (1 << USB_DEVICE_REMOTE_WAKEUP)) && udev->parent) { @@ -1811,24 +1658,9 @@ static int finish_device_resume(struct usb_device *udev) USB_DEVICE_REMOTE_WAKEUP, 0, NULL, 0, USB_CTRL_SET_TIMEOUT); - if (status) { + if (status) dev_dbg(&udev->dev, "disable remote " "wakeup, status %d\n", status); - status = 0; - } - } - - /* resume interface drivers; if this is a hub, it - * may have a child resume event to deal with soon - */ - resume = udev->dev.bus->resume; - for (i = 0; i < udev->actconfig->desc.bNumInterfaces; i++) { - struct device *dev = - &udev->actconfig->interface[i]->dev; - - down(&dev->sem); - (void) resume(dev); - up(&dev->sem); } status = 0; @@ -1839,8 +1671,6 @@ static int finish_device_resume(struct usb_device *udev) return status; } -#ifdef CONFIG_USB_SUSPEND - static int hub_port_resume(struct usb_hub *hub, int port1, struct usb_device *udev) { @@ -1848,6 +1678,8 @@ hub_port_resume(struct usb_hub *hub, int port1, struct usb_device *udev) // dev_dbg(hub->intfdev, "resume port %d\n", port1); + set_bit(port1, hub->busy_bits); + /* see 7.1.7.7; affects power usage, but not budgeting */ status = clear_port_feature(hub->hdev, port1, USB_PORT_FEAT_SUSPEND); @@ -1861,7 +1693,8 @@ hub_port_resume(struct usb_hub *hub, int port1, struct usb_device *udev) /* drive resume for at least 20 msec */ if (udev) - dev_dbg(&udev->dev, "RESUME\n"); + dev_dbg(&udev->dev, "usb %sresume\n", + udev->auto_pm ? "auto-" : ""); msleep(25); #define LIVE_FLAGS ( USB_PORT_STAT_POWER \ @@ -1891,19 +1724,21 @@ hub_port_resume(struct usb_hub *hub, int port1, struct usb_device *udev) /* TRSMRCY = 10 msec */ msleep(10); if (udev) - status = finish_device_resume(udev); + status = finish_port_resume(udev); } } if (status < 0) hub_port_logical_disconnect(hub, port1); + clear_bit(port1, hub->busy_bits); + if (!hub->hdev->parent && !hub->busy_bits[0]) + usb_enable_root_hub_irq(hub->hdev->bus); + return status; } -#endif - /* - * usb_resume_device - re-activate a suspended usb device + * usb_port_resume - re-activate a suspended usb device's upstream port * @udev: device to re-activate * Context: must be able to sleep; device not locked; pm locks held * @@ -1915,36 +1750,24 @@ hub_port_resume(struct usb_hub *hub, int port1, struct usb_device *udev) * * Returns 0 on success, else negative errno. */ -int usb_resume_device(struct usb_device *udev) +int usb_port_resume(struct usb_device *udev) { int status; - if (udev->state == USB_STATE_NOTATTACHED) - return -ENODEV; - - /* selective resume of one downstream hub-to-device port */ + /* we change the device's upstream USB link, + * but root hubs have no upstream USB link. + */ if (udev->parent) { -#ifdef CONFIG_USB_SUSPEND - if (udev->state == USB_STATE_SUSPENDED) { - // NOTE swsusp may bork us, device state being wrong... - // NOTE this fails if parent is also suspended... - status = hub_port_resume(hdev_to_hub(udev->parent), - udev->portnum, udev); - } else -#endif - status = 0; - } else - status = finish_device_resume(udev); - if (status < 0) - dev_dbg(&udev->dev, "can't resume, status %d\n", - status); - - /* rebind drivers that had no suspend() */ - if (status == 0) { - usb_unlock_device(udev); - bus_rescan_devices(&usb_bus_type); - usb_lock_device(udev); + // NOTE this fails if parent is also suspended... + status = hub_port_resume(hdev_to_hub(udev->parent), + udev->portnum, udev); + } else { + dev_dbg(&udev->dev, "usb %sresume\n", + udev->auto_pm ? "auto-" : ""); + status = finish_port_resume(udev); } + if (status < 0) + dev_dbg(&udev->dev, "can't resume, status %d\n", status); return status; } @@ -1952,23 +1775,60 @@ static int remote_wakeup(struct usb_device *udev) { int status = 0; -#ifdef CONFIG_USB_SUSPEND + /* All this just to avoid sending a port-resume message + * to the parent hub! */ - /* don't repeat RESUME sequence if this device - * was already woken up by some other task - */ usb_lock_device(udev); + mutex_lock_nested(&udev->pm_mutex, udev->level); if (udev->state == USB_STATE_SUSPENDED) { - dev_dbg(&udev->dev, "RESUME (wakeup)\n"); + dev_dbg(&udev->dev, "usb %sresume\n", "wakeup-"); /* TRSMRCY = 10 msec */ msleep(10); - status = finish_device_resume(udev); + status = finish_port_resume(udev); + if (status == 0) + udev->dev.power.power_state.event = PM_EVENT_ON; } + mutex_unlock(&udev->pm_mutex); + + if (status == 0) + usb_autoresume_device(udev, 0); usb_unlock_device(udev); -#endif return status; } +#else /* CONFIG_USB_SUSPEND */ + +/* When CONFIG_USB_SUSPEND isn't set, we never suspend or resume any ports. */ + +int usb_port_suspend(struct usb_device *udev) +{ + return 0; +} + +static inline int +finish_port_resume(struct usb_device *udev) +{ + return 0; +} + +static inline int +hub_port_resume(struct usb_hub *hub, int port1, struct usb_device *udev) +{ + return 0; +} + +int usb_port_resume(struct usb_device *udev) +{ + return 0; +} + +static inline int remote_wakeup(struct usb_device *udev) +{ + return 0; +} + +#endif + static int hub_suspend(struct usb_interface *intf, pm_message_t msg) { struct usb_hub *hub = usb_get_intfdata (intf); @@ -1980,13 +1840,17 @@ static int hub_suspend(struct usb_interface *intf, pm_message_t msg) struct usb_device *udev; udev = hdev->children [port1-1]; - if (udev && (udev->dev.power.power_state.event - == PM_EVENT_ON + if (udev && msg.event == PM_EVENT_SUSPEND && #ifdef CONFIG_USB_SUSPEND - || udev->state != USB_STATE_SUSPENDED + udev->state != USB_STATE_SUSPENDED +#else + udev->dev.power.power_state.event + == PM_EVENT_ON #endif - )) { - dev_dbg(&intf->dev, "port %d nyet suspended\n", port1); + ) { + if (!hdev->auto_pm) + dev_dbg(&intf->dev, "port %d nyet suspended\n", + port1); return -EBUSY; } } @@ -2035,66 +1899,22 @@ static int hub_resume(struct usb_interface *intf) } } + /* tell khubd to look for changes on this hub */ hub_activate(hub); - - /* REVISIT: this recursion probably shouldn't exist. Remove - * this code sometime, after retesting with different root and - * external hubs. - */ -#ifdef CONFIG_USB_SUSPEND - { - unsigned port1; - - for (port1 = 1; port1 <= hdev->maxchild; port1++) { - struct usb_device *udev; - u16 portstat, portchange; - - udev = hdev->children [port1-1]; - status = hub_port_status(hub, port1, &portstat, &portchange); - if (status == 0) { - if (portchange & USB_PORT_STAT_C_SUSPEND) { - clear_port_feature(hdev, port1, - USB_PORT_FEAT_C_SUSPEND); - portchange &= ~USB_PORT_STAT_C_SUSPEND; - } - - /* let khubd handle disconnects etc */ - if (portchange) - continue; - } - - if (!udev || status < 0) - continue; - usb_lock_device(udev); - if (portstat & USB_PORT_STAT_SUSPEND) - status = hub_port_resume(hub, port1, udev); - else { - status = finish_device_resume(udev); - if (status < 0) { - dev_dbg(&intf->dev, "resume port %d --> %d\n", - port1, status); - hub_port_logical_disconnect(hub, port1); - } - } - usb_unlock_device(udev); - } - } -#endif return 0; } -void usb_suspend_root_hub(struct usb_device *hdev) -{ - struct usb_hub *hub = hdev_to_hub(hdev); +#else /* CONFIG_PM */ - /* This also makes any led blinker stop retriggering. We're called - * from irq, so the blinker might still be scheduled. Caller promises - * that the root hub status URB will be canceled. - */ - __hub_quiesce(hub); - mark_quiesced(to_usb_interface(hub->intfdev)); +static inline int remote_wakeup(struct usb_device *udev) +{ + return 0; } +#define hub_suspend NULL +#define hub_resume NULL +#endif + void usb_resume_root_hub(struct usb_device *hdev) { struct usb_hub *hub = hdev_to_hub(hdev); @@ -2214,6 +2034,7 @@ hub_port_init (struct usb_hub *hub, struct usb_device *udev, int port1, int i, j, retval; unsigned delay = HUB_SHORT_RESET_TIME; enum usb_device_speed oldspeed = udev->speed; + char *speed, *type; /* root hub ports have a slightly longer reset period * (from USB 2.0 spec, section 7.1.7.5) @@ -2246,8 +2067,13 @@ hub_port_init (struct usb_hub *hub, struct usb_device *udev, int port1, /* USB 2.0 section 5.5.3 talks about ep0 maxpacket ... * it's fixed size except for full speed devices. + * For Wireless USB devices, ep0 max packet is always 512 (tho + * reported as 0xff in the device descriptor). WUSB1.0[4.8.1]. */ switch (udev->speed) { + case USB_SPEED_VARIABLE: /* fixed at 512 */ + udev->ep0.desc.wMaxPacketSize = __constant_cpu_to_le16(512); + break; case USB_SPEED_HIGH: /* fixed at 64 */ udev->ep0.desc.wMaxPacketSize = __constant_cpu_to_le16(64); break; @@ -2265,17 +2091,21 @@ hub_port_init (struct usb_hub *hub, struct usb_device *udev, int port1, goto fail; } + type = ""; + switch (udev->speed) { + case USB_SPEED_LOW: speed = "low"; break; + case USB_SPEED_FULL: speed = "full"; break; + case USB_SPEED_HIGH: speed = "high"; break; + case USB_SPEED_VARIABLE: + speed = "variable"; + type = "Wireless "; + break; + default: speed = "?"; break; + } dev_info (&udev->dev, - "%s %s speed USB device using %s and address %d\n", - (udev->config) ? "reset" : "new", - ({ char *speed; switch (udev->speed) { - case USB_SPEED_LOW: speed = "low"; break; - case USB_SPEED_FULL: speed = "full"; break; - case USB_SPEED_HIGH: speed = "high"; break; - default: speed = "?"; break; - }; speed;}), - udev->bus->controller->driver->name, - udev->devnum); + "%s %s speed %sUSB device using %s and address %d\n", + (udev->config) ? "reset" : "new", speed, type, + udev->bus->controller->driver->name, udev->devnum); /* Set up TT records, if needed */ if (hdev->tt) { @@ -2317,6 +2147,8 @@ hub_port_init (struct usb_hub *hub, struct usb_device *udev, int port1, * down tremendously by NAKing the unexpectedly * early status stage. Also, retry on all errors; * some devices are flakey. + * 255 is for WUSB devices, we actually need to use 512. + * WUSB1.0[4.8.1]. */ for (j = 0; j < 3; ++j) { buf->bMaxPacketSize0 = 0; @@ -2326,7 +2158,7 @@ hub_port_init (struct usb_hub *hub, struct usb_device *udev, int port1, buf, GET_DESCRIPTOR_BUFSIZE, (i ? USB_CTRL_GET_TIMEOUT : 1000)); switch (buf->bMaxPacketSize0) { - case 8: case 16: case 32: case 64: + case 8: case 16: case 32: case 64: case 255: if (buf->bDescriptorType == USB_DT_DEVICE) { r = 0; @@ -2400,7 +2232,8 @@ hub_port_init (struct usb_hub *hub, struct usb_device *udev, int port1, if (retval) goto fail; - i = udev->descriptor.bMaxPacketSize0; + i = udev->descriptor.bMaxPacketSize0 == 0xff? + 512 : udev->descriptor.bMaxPacketSize0; if (le16_to_cpu(udev->ep0.desc.wMaxPacketSize) != i) { if (udev->speed != USB_SPEED_FULL || !(i == 8 || i == 16 || i == 32 || i == 64)) { @@ -2585,6 +2418,7 @@ static void hub_port_connect_change(struct usb_hub *hub, int port1, usb_set_device_state(udev, USB_STATE_POWERED); udev->speed = USB_SPEED_UNKNOWN; udev->bus_mA = hub->mA_per_port; + udev->level = hdev->level + 1; /* set the address */ choose_address(udev); @@ -2736,17 +2570,6 @@ static void hub_events(void) usb_get_intf(intf); spin_unlock_irq(&hub_event_lock); - /* Is this is a root hub wanting to reactivate the downstream - * ports? If so, be sure the interface resumes even if its - * stub "device" node was never suspended. - */ - if (i) { - dpm_runtime_resume(&hdev->dev); - dpm_runtime_resume(&intf->dev); - usb_put_intf(intf); - continue; - } - /* Lock the device, then check to see if we were * disconnected while waiting for the lock to succeed. */ if (locktree(hdev) < 0) { @@ -2763,6 +2586,13 @@ static void hub_events(void) goto loop; } + /* Is this is a root hub wanting to reactivate the downstream + * ports? If so, be sure the interface resumes even if its + * stub "device" node was never suspended. + */ + if (i) + usb_autoresume_device(hdev, 0); + /* If this is an inactive or suspended hub, do nothing */ if (hub->quiescing) goto loop; @@ -2900,7 +2730,7 @@ static void hub_events(void) /* If this is a root hub, tell the HCD it's okay to * re-enable port-change interrupts now. */ - if (!hdev->parent) + if (!hdev->parent && !hub->busy_bits[0]) usb_enable_root_hub_irq(hdev->bus); loop: @@ -3075,6 +2905,9 @@ int usb_reset_device(struct usb_device *udev) break; } clear_bit(port1, parent_hub->busy_bits); + if (!parent_hdev->parent && !parent_hub->busy_bits[0]) + usb_enable_root_hub_irq(parent_hdev->bus); + if (ret < 0) goto re_enumerate; @@ -3128,6 +2961,7 @@ re_enumerate: hub_port_logical_disconnect(parent_hub, port1); return -ENODEV; } +EXPORT_SYMBOL(usb_reset_device); /** * usb_reset_composite_device - warn interface drivers and perform a USB port reset @@ -3163,6 +2997,9 @@ int usb_reset_composite_device(struct usb_device *udev, return -EINVAL; } + /* Prevent autosuspend during the reset */ + usb_autoresume_device(udev, 1); + if (iface && iface->condition != USB_INTERFACE_BINDING) iface = NULL; @@ -3204,5 +3041,7 @@ int usb_reset_composite_device(struct usb_device *udev, } } + usb_autosuspend_device(udev, 1); return ret; } +EXPORT_SYMBOL(usb_reset_composite_device); diff --git a/drivers/usb/core/hub.h b/drivers/usb/core/hub.h index 29d5f45a845..0f8e82a4d48 100644 --- a/drivers/usb/core/hub.h +++ b/drivers/usb/core/hub.h @@ -212,7 +212,8 @@ struct usb_hub { unsigned long event_bits[1]; /* status change bitmask */ unsigned long change_bits[1]; /* ports with logical connect status change */ - unsigned long busy_bits[1]; /* ports being reset */ + unsigned long busy_bits[1]; /* ports being reset or + resumed */ #if USB_MAXCHILDREN > 31 /* 8*sizeof(unsigned long) - 1 */ #error event_bits[] is too short! #endif diff --git a/drivers/usb/core/inode.c b/drivers/usb/core/inode.c index 3182c2224ba..df3d152f049 100644 --- a/drivers/usb/core/inode.c +++ b/drivers/usb/core/inode.c @@ -44,7 +44,7 @@ #include "hcd.h" static struct super_operations usbfs_ops; -static struct file_operations default_file_operations; +static const struct file_operations default_file_operations; static struct vfsmount *usbfs_mount; static int usbfs_mount_count; /* = 0 */ static int ignore_mount = 0; @@ -249,7 +249,6 @@ static struct inode *usbfs_get_inode (struct super_block *sb, int mode, dev_t de inode->i_mode = mode; inode->i_uid = current->fsuid; inode->i_gid = current->fsgid; - inode->i_blksize = PAGE_CACHE_SIZE; inode->i_blocks = 0; inode->i_atime = inode->i_mtime = inode->i_ctime = CURRENT_TIME; switch (mode & S_IFMT) { @@ -402,13 +401,13 @@ static loff_t default_file_lseek (struct file *file, loff_t offset, int orig) static int default_open (struct inode *inode, struct file *file) { - if (inode->u.generic_ip) - file->private_data = inode->u.generic_ip; + if (inode->i_private) + file->private_data = inode->i_private; return 0; } -static struct file_operations default_file_operations = { +static const struct file_operations default_file_operations = { .read = default_read_file, .write = default_write_file, .open = default_open, @@ -495,7 +494,7 @@ static int fs_create_by_name (const char *name, mode_t mode, static struct dentry *fs_create_file (const char *name, mode_t mode, struct dentry *parent, void *data, - struct file_operations *fops, + const struct file_operations *fops, uid_t uid, gid_t gid) { struct dentry *dentry; @@ -509,7 +508,7 @@ static struct dentry *fs_create_file (const char *name, mode_t mode, } else { if (dentry->d_inode) { if (data) - dentry->d_inode->u.generic_ip = data; + dentry->d_inode->i_private = data; if (fops) dentry->d_inode->i_fop = fops; dentry->d_inode->i_uid = uid; diff --git a/drivers/usb/core/message.c b/drivers/usb/core/message.c index 4cc8d3e67db..85b1cd18336 100644 --- a/drivers/usb/core/message.c +++ b/drivers/usb/core/message.c @@ -23,59 +23,44 @@ static void usb_api_blocking_completion(struct urb *urb, struct pt_regs *regs) } -static void timeout_kill(unsigned long data) -{ - struct urb *urb = (struct urb *) data; - - usb_unlink_urb(urb); -} - -// Starts urb and waits for completion or timeout -// note that this call is NOT interruptible, while -// many device driver i/o requests should be interruptible -static int usb_start_wait_urb(struct urb *urb, int timeout, int* actual_length) +/* + * Starts urb and waits for completion or timeout. Note that this call + * is NOT interruptible. Many device driver i/o requests should be + * interruptible and therefore these drivers should implement their + * own interruptible routines. + */ +static int usb_start_wait_urb(struct urb *urb, int timeout, int *actual_length) { - struct completion done; - struct timer_list timer; - int status; + struct completion done; + unsigned long expire; + int status; init_completion(&done); urb->context = &done; urb->actual_length = 0; status = usb_submit_urb(urb, GFP_NOIO); - - if (status == 0) { - if (timeout > 0) { - init_timer(&timer); - timer.expires = jiffies + msecs_to_jiffies(timeout); - timer.data = (unsigned long)urb; - timer.function = timeout_kill; - /* grr. timeout _should_ include submit delays. */ - add_timer(&timer); - } - wait_for_completion(&done); + if (unlikely(status)) + goto out; + + expire = timeout ? msecs_to_jiffies(timeout) : MAX_SCHEDULE_TIMEOUT; + if (!wait_for_completion_timeout(&done, expire)) { + + dev_dbg(&urb->dev->dev, + "%s timed out on ep%d%s len=%d/%d\n", + current->comm, + usb_pipeendpoint(urb->pipe), + usb_pipein(urb->pipe) ? "in" : "out", + urb->actual_length, + urb->transfer_buffer_length); + + usb_kill_urb(urb); + status = urb->status == -ENOENT ? -ETIMEDOUT : urb->status; + } else status = urb->status; - /* note: HCDs return ETIMEDOUT for other reasons too */ - if (status == -ECONNRESET) { - dev_dbg(&urb->dev->dev, - "%s timed out on ep%d%s len=%d/%d\n", - current->comm, - usb_pipeendpoint(urb->pipe), - usb_pipein(urb->pipe) ? "in" : "out", - urb->actual_length, - urb->transfer_buffer_length - ); - if (urb->actual_length > 0) - status = 0; - else - status = -ETIMEDOUT; - } - if (timeout > 0) - del_timer_sync(&timer); - } - +out: if (actual_length) *actual_length = urb->actual_length; + usb_free_urb(urb); return status; } @@ -263,7 +248,7 @@ static void sg_clean (struct usb_sg_request *io) static void sg_complete (struct urb *urb, struct pt_regs *regs) { - struct usb_sg_request *io = (struct usb_sg_request *) urb->context; + struct usb_sg_request *io = urb->context; spin_lock (&io->lock); @@ -999,8 +984,8 @@ void usb_disable_endpoint(struct usb_device *dev, unsigned int epaddr) ep = dev->ep_in[epnum]; dev->ep_in[epnum] = NULL; } - if (ep && dev->bus && dev->bus->op && dev->bus->op->disable) - dev->bus->op->disable(dev, ep); + if (ep && dev->bus) + usb_hcd_endpoint_disable(dev, ep); } /** @@ -1381,9 +1366,6 @@ int usb_set_configuration(struct usb_device *dev, int configuration) if (cp && configuration == 0) dev_warn(&dev->dev, "config 0 descriptor??\n"); - if (dev->state == USB_STATE_SUSPENDED) - return -EHOSTUNREACH; - /* Allocate memory for new interfaces before doing anything else, * so that if we run out then nothing will have changed. */ n = nintf = 0; @@ -1418,6 +1400,11 @@ free_interfaces: configuration, -i); } + /* Wake up the device so we can send it the Set-Config request */ + ret = usb_autoresume_device(dev, 1); + if (ret) + goto free_interfaces; + /* if it's already configured, clear out old state first. * getting rid of old interfaces means unbinding their drivers. */ @@ -1437,6 +1424,7 @@ free_interfaces: dev->actconfig = cp; if (!cp) { usb_set_device_state(dev, USB_STATE_ADDRESS); + usb_autosuspend_device(dev, 1); goto free_interfaces; } usb_set_device_state(dev, USB_STATE_CONFIGURED); @@ -1505,8 +1493,68 @@ free_interfaces: usb_create_sysfs_intf_files (intf); } + usb_autosuspend_device(dev, 1); + return 0; +} + +struct set_config_request { + struct usb_device *udev; + int config; + struct work_struct work; +}; + +/* Worker routine for usb_driver_set_configuration() */ +static void driver_set_config_work(void *_req) +{ + struct set_config_request *req = _req; + + usb_lock_device(req->udev); + usb_set_configuration(req->udev, req->config); + usb_unlock_device(req->udev); + usb_put_dev(req->udev); + kfree(req); +} + +/** + * usb_driver_set_configuration - Provide a way for drivers to change device configurations + * @udev: the device whose configuration is being updated + * @config: the configuration being chosen. + * Context: In process context, must be able to sleep + * + * Device interface drivers are not allowed to change device configurations. + * This is because changing configurations will destroy the interface the + * driver is bound to and create new ones; it would be like a floppy-disk + * driver telling the computer to replace the floppy-disk drive with a + * tape drive! + * + * Still, in certain specialized circumstances the need may arise. This + * routine gets around the normal restrictions by using a work thread to + * submit the change-config request. + * + * Returns 0 if the request was succesfully queued, error code otherwise. + * The caller has no way to know whether the queued request will eventually + * succeed. + */ +int usb_driver_set_configuration(struct usb_device *udev, int config) +{ + struct set_config_request *req; + + req = kmalloc(sizeof(*req), GFP_KERNEL); + if (!req) + return -ENOMEM; + req->udev = udev; + req->config = config; + INIT_WORK(&req->work, driver_set_config_work, req); + + usb_get_dev(udev); + if (!schedule_work(&req->work)) { + usb_put_dev(udev); + kfree(req); + return -EINVAL; + } return 0; } +EXPORT_SYMBOL_GPL(usb_driver_set_configuration); // synchronous request completion model EXPORT_SYMBOL(usb_control_msg); diff --git a/drivers/usb/core/notify.c b/drivers/usb/core/notify.c index b042676af0a..6b36897ca15 100644 --- a/drivers/usb/core/notify.c +++ b/drivers/usb/core/notify.c @@ -50,8 +50,11 @@ void usb_notify_add_device(struct usb_device *udev) void usb_notify_remove_device(struct usb_device *udev) { + /* Protect against simultaneous usbfs open */ + mutex_lock(&usbfs_mutex); blocking_notifier_call_chain(&usb_notifier_list, USB_DEVICE_REMOVE, udev); + mutex_unlock(&usbfs_mutex); } void usb_notify_add_bus(struct usb_bus *ubus) diff --git a/drivers/usb/core/sysfs.c b/drivers/usb/core/sysfs.c index dec973affb0..55d8f575206 100644 --- a/drivers/usb/core/sysfs.c +++ b/drivers/usb/core/sysfs.c @@ -60,7 +60,7 @@ static ssize_t set_bConfigurationValue (struct device *dev, struct device_attribute *attr, const char *buf, size_t count) { - struct usb_device *udev = udev = to_usb_device (dev); + struct usb_device *udev = to_usb_device (dev); int config, value; if (sscanf (buf, "%u", &config) != 1 || config > 255) @@ -186,6 +186,7 @@ usb_descriptor_attr (bMaxPacketSize0, "%d\n") static struct attribute *dev_attrs[] = { /* current configuration's attributes */ + &dev_attr_configuration.attr, &dev_attr_bNumInterfaces.attr, &dev_attr_bConfigurationValue.attr, &dev_attr_bmAttributes.attr, @@ -209,20 +210,40 @@ static struct attribute_group dev_attr_grp = { .attrs = dev_attrs, }; -void usb_create_sysfs_dev_files (struct usb_device *udev) +int usb_create_sysfs_dev_files(struct usb_device *udev) { struct device *dev = &udev->dev; + int retval; - sysfs_create_group(&dev->kobj, &dev_attr_grp); + retval = sysfs_create_group(&dev->kobj, &dev_attr_grp); + if (retval) + return retval; - if (udev->manufacturer) - device_create_file (dev, &dev_attr_manufacturer); - if (udev->product) - device_create_file (dev, &dev_attr_product); - if (udev->serial) - device_create_file (dev, &dev_attr_serial); - device_create_file (dev, &dev_attr_configuration); - usb_create_ep_files(dev, &udev->ep0, udev); + if (udev->manufacturer) { + retval = device_create_file (dev, &dev_attr_manufacturer); + if (retval) + goto error; + } + if (udev->product) { + retval = device_create_file (dev, &dev_attr_product); + if (retval) + goto error; + } + if (udev->serial) { + retval = device_create_file (dev, &dev_attr_serial); + if (retval) + goto error; + } + retval = usb_create_ep_files(dev, &udev->ep0, udev); + if (retval) + goto error; + return 0; +error: + usb_remove_ep_files(&udev->ep0); + device_remove_file(dev, &dev_attr_manufacturer); + device_remove_file(dev, &dev_attr_product); + device_remove_file(dev, &dev_attr_serial); + return retval; } void usb_remove_sysfs_dev_files (struct usb_device *udev) @@ -238,7 +259,6 @@ void usb_remove_sysfs_dev_files (struct usb_device *udev) device_remove_file(dev, &dev_attr_product); if (udev->serial) device_remove_file(dev, &dev_attr_serial); - device_remove_file (dev, &dev_attr_configuration); } /* Interface fields */ @@ -340,18 +360,28 @@ static inline void usb_remove_intf_ep_files(struct usb_interface *intf) usb_remove_ep_files(&iface_desc->endpoint[i]); } -void usb_create_sysfs_intf_files (struct usb_interface *intf) +int usb_create_sysfs_intf_files(struct usb_interface *intf) { struct usb_device *udev = interface_to_usbdev(intf); struct usb_host_interface *alt = intf->cur_altsetting; + int retval; - sysfs_create_group(&intf->dev.kobj, &intf_attr_grp); + retval = sysfs_create_group(&intf->dev.kobj, &intf_attr_grp); + if (retval) + goto error; if (alt->string == NULL) alt->string = usb_cache_string(udev, alt->desc.iInterface); if (alt->string) - device_create_file(&intf->dev, &dev_attr_interface); + retval = device_create_file(&intf->dev, &dev_attr_interface); usb_create_intf_ep_files(intf, udev); + return 0; +error: + if (alt->string) + device_remove_file(&intf->dev, &dev_attr_interface); + sysfs_remove_group(&intf->dev.kobj, &intf_attr_grp); + usb_remove_intf_ep_files(intf); + return retval; } void usb_remove_sysfs_intf_files (struct usb_interface *intf) diff --git a/drivers/usb/core/urb.c b/drivers/usb/core/urb.c index 9864988377c..9801d08edac 100644 --- a/drivers/usb/core/urb.c +++ b/drivers/usb/core/urb.c @@ -57,7 +57,7 @@ struct urb *usb_alloc_urb(int iso_packets, gfp_t mem_flags) { struct urb *urb; - urb = (struct urb *)kmalloc(sizeof(struct urb) + + urb = kmalloc(sizeof(struct urb) + iso_packets * sizeof(struct usb_iso_packet_descriptor), mem_flags); if (!urb) { @@ -221,7 +221,6 @@ int usb_submit_urb(struct urb *urb, gfp_t mem_flags) { int pipe, temp, max; struct usb_device *dev; - struct usb_operations *op; int is_out; if (!urb || urb->hcpriv || !urb->complete) @@ -233,8 +232,6 @@ int usb_submit_urb(struct urb *urb, gfp_t mem_flags) if (dev->bus->controller->power.power_state.event != PM_EVENT_ON || dev->state == USB_STATE_SUSPENDED) return -EHOSTUNREACH; - if (!(op = dev->bus->op) || !op->submit_urb) - return -ENODEV; urb->status = -EINPROGRESS; urb->actual_length = 0; @@ -376,7 +373,7 @@ int usb_submit_urb(struct urb *urb, gfp_t mem_flags) urb->interval = temp; } - return op->submit_urb (urb, mem_flags); + return usb_hcd_submit_urb (urb, mem_flags); } /*-------------------------------------------------------------------*/ @@ -440,9 +437,9 @@ int usb_unlink_urb(struct urb *urb) { if (!urb) return -EINVAL; - if (!(urb->dev && urb->dev->bus && urb->dev->bus->op)) + if (!(urb->dev && urb->dev->bus)) return -ENODEV; - return urb->dev->bus->op->unlink_urb(urb, -ECONNRESET); + return usb_hcd_unlink_urb(urb, -ECONNRESET); } /** @@ -468,13 +465,13 @@ int usb_unlink_urb(struct urb *urb) void usb_kill_urb(struct urb *urb) { might_sleep(); - if (!(urb && urb->dev && urb->dev->bus && urb->dev->bus->op)) + if (!(urb && urb->dev && urb->dev->bus)) return; spin_lock_irq(&urb->lock); ++urb->reject; spin_unlock_irq(&urb->lock); - urb->dev->bus->op->unlink_urb(urb, -ENOENT); + usb_hcd_unlink_urb(urb, -ENOENT); wait_event(usb_kill_urb_queue, atomic_read(&urb->use_count) == 0); spin_lock_irq(&urb->lock); diff --git a/drivers/usb/core/usb.c b/drivers/usb/core/usb.c index 184c24660a4..60ef4ef0101 100644 --- a/drivers/usb/core/usb.c +++ b/drivers/usb/core/usb.c @@ -67,7 +67,8 @@ static int nousb; /* Disable USB when built into kernel image */ * Don't call this function unless you are bound to one of the interfaces * on this device or you have locked the device! */ -struct usb_interface *usb_ifnum_to_if(struct usb_device *dev, unsigned ifnum) +struct usb_interface *usb_ifnum_to_if(const struct usb_device *dev, + unsigned ifnum) { struct usb_host_config *config = dev->actconfig; int i; @@ -100,8 +101,8 @@ struct usb_interface *usb_ifnum_to_if(struct usb_device *dev, unsigned ifnum) * Don't call this function unless you are bound to the intf interface * or you have locked the device! */ -struct usb_host_interface *usb_altnum_to_altsetting(struct usb_interface *intf, - unsigned int altnum) +struct usb_host_interface *usb_altnum_to_altsetting(const struct usb_interface *intf, + unsigned int altnum) { int i; @@ -112,87 +113,6 @@ struct usb_host_interface *usb_altnum_to_altsetting(struct usb_interface *intf, return NULL; } -/** - * usb_driver_claim_interface - bind a driver to an interface - * @driver: the driver to be bound - * @iface: the interface to which it will be bound; must be in the - * usb device's active configuration - * @priv: driver data associated with that interface - * - * This is used by usb device drivers that need to claim more than one - * interface on a device when probing (audio and acm are current examples). - * No device driver should directly modify internal usb_interface or - * usb_device structure members. - * - * Few drivers should need to use this routine, since the most natural - * way to bind to an interface is to return the private data from - * the driver's probe() method. - * - * Callers must own the device lock and the driver model's usb_bus_type.subsys - * writelock. So driver probe() entries don't need extra locking, - * but other call contexts may need to explicitly claim those locks. - */ -int usb_driver_claim_interface(struct usb_driver *driver, - struct usb_interface *iface, void* priv) -{ - struct device *dev = &iface->dev; - - if (dev->driver) - return -EBUSY; - - dev->driver = &driver->driver; - usb_set_intfdata(iface, priv); - iface->condition = USB_INTERFACE_BOUND; - mark_active(iface); - - /* if interface was already added, bind now; else let - * the future device_add() bind it, bypassing probe() - */ - if (device_is_registered(dev)) - device_bind_driver(dev); - - return 0; -} - -/** - * usb_driver_release_interface - unbind a driver from an interface - * @driver: the driver to be unbound - * @iface: the interface from which it will be unbound - * - * This can be used by drivers to release an interface without waiting - * for their disconnect() methods to be called. In typical cases this - * also causes the driver disconnect() method to be called. - * - * This call is synchronous, and may not be used in an interrupt context. - * Callers must own the device lock and the driver model's usb_bus_type.subsys - * writelock. So driver disconnect() entries don't need extra locking, - * but other call contexts may need to explicitly claim those locks. - */ -void usb_driver_release_interface(struct usb_driver *driver, - struct usb_interface *iface) -{ - struct device *dev = &iface->dev; - - /* this should never happen, don't release something that's not ours */ - if (!dev->driver || dev->driver != &driver->driver) - return; - - /* don't release from within disconnect() */ - if (iface->condition != USB_INTERFACE_BOUND) - return; - - /* don't release if the interface hasn't been added yet */ - if (device_is_registered(dev)) { - iface->condition = USB_INTERFACE_UNBINDING; - device_release_driver(dev); - } - - dev->driver = NULL; - usb_set_intfdata(iface, NULL); - iface->condition = USB_INTERFACE_UNBOUND; - mark_quiesced(iface); -} - struct find_interface_arg { int minor; struct usb_interface *interface; @@ -204,7 +124,7 @@ static int __find_interface(struct device * dev, void * data) struct usb_interface *intf; /* can't look at usb devices, only interfaces */ - if (dev->driver == &usb_generic_driver) + if (is_usb_device(dev)) return 0; intf = to_usb_interface(dev); @@ -227,127 +147,16 @@ static int __find_interface(struct device * dev, void * data) struct usb_interface *usb_find_interface(struct usb_driver *drv, int minor) { struct find_interface_arg argb; + int retval; argb.minor = minor; argb.interface = NULL; - driver_for_each_device(&drv->driver, NULL, &argb, __find_interface); + /* eat the error, it will be in argb.interface */ + retval = driver_for_each_device(&drv->drvwrap.driver, NULL, &argb, + __find_interface); return argb.interface; } -#ifdef CONFIG_HOTPLUG - -/* - * This sends an uevent to userspace, typically helping to load driver - * or other modules, configure the device, and more. Drivers can provide - * a MODULE_DEVICE_TABLE to help with module loading subtasks. - * - * We're called either from khubd (the typical case) or from root hub - * (init, kapmd, modprobe, rmmod, etc), but the agents need to handle - * delays in event delivery. Use sysfs (and DEVPATH) to make sure the - * device (and this configuration!) are still present. - */ -static int usb_uevent(struct device *dev, char **envp, int num_envp, - char *buffer, int buffer_size) -{ - struct usb_interface *intf; - struct usb_device *usb_dev; - struct usb_host_interface *alt; - int i = 0; - int length = 0; - - if (!dev) - return -ENODEV; - - /* driver is often null here; dev_dbg() would oops */ - pr_debug ("usb %s: uevent\n", dev->bus_id); - - /* Must check driver_data here, as on remove driver is always NULL */ - if ((dev->driver == &usb_generic_driver) || - (dev->driver_data == &usb_generic_driver_data)) - return 0; - - intf = to_usb_interface(dev); - usb_dev = interface_to_usbdev (intf); - alt = intf->cur_altsetting; - - if (usb_dev->devnum < 0) { - pr_debug ("usb %s: already deleted?\n", dev->bus_id); - return -ENODEV; - } - if (!usb_dev->bus) { - pr_debug ("usb %s: bus removed?\n", dev->bus_id); - return -ENODEV; - } - -#ifdef CONFIG_USB_DEVICEFS - /* If this is available, userspace programs can directly read - * all the device descriptors we don't tell them about. Or - * even act as usermode drivers. - * - * FIXME reduce hardwired intelligence here - */ - if (add_uevent_var(envp, num_envp, &i, - buffer, buffer_size, &length, - "DEVICE=/proc/bus/usb/%03d/%03d", - usb_dev->bus->busnum, usb_dev->devnum)) - return -ENOMEM; -#endif - - /* per-device configurations are common */ - if (add_uevent_var(envp, num_envp, &i, - buffer, buffer_size, &length, - "PRODUCT=%x/%x/%x", - le16_to_cpu(usb_dev->descriptor.idVendor), - le16_to_cpu(usb_dev->descriptor.idProduct), - le16_to_cpu(usb_dev->descriptor.bcdDevice))) - return -ENOMEM; - - /* class-based driver binding models */ - if (add_uevent_var(envp, num_envp, &i, - buffer, buffer_size, &length, - "TYPE=%d/%d/%d", - usb_dev->descriptor.bDeviceClass, - usb_dev->descriptor.bDeviceSubClass, - usb_dev->descriptor.bDeviceProtocol)) - return -ENOMEM; - - if (add_uevent_var(envp, num_envp, &i, - buffer, buffer_size, &length, - "INTERFACE=%d/%d/%d", - alt->desc.bInterfaceClass, - alt->desc.bInterfaceSubClass, - alt->desc.bInterfaceProtocol)) - return -ENOMEM; - - if (add_uevent_var(envp, num_envp, &i, - buffer, buffer_size, &length, - "MODALIAS=usb:v%04Xp%04Xd%04Xdc%02Xdsc%02Xdp%02Xic%02Xisc%02Xip%02X", - le16_to_cpu(usb_dev->descriptor.idVendor), - le16_to_cpu(usb_dev->descriptor.idProduct), - le16_to_cpu(usb_dev->descriptor.bcdDevice), - usb_dev->descriptor.bDeviceClass, - usb_dev->descriptor.bDeviceSubClass, - usb_dev->descriptor.bDeviceProtocol, - alt->desc.bInterfaceClass, - alt->desc.bInterfaceSubClass, - alt->desc.bInterfaceProtocol)) - return -ENOMEM; - - envp[i] = NULL; - - return 0; -} - -#else - -static int usb_uevent(struct device *dev, char **envp, - int num_envp, char *buffer, int buffer_size) -{ - return -ENODEV; -} - -#endif /* CONFIG_HOTPLUG */ - /** * usb_release_dev - free a usb device structure when all users of it are finished. * @dev: device that's been disconnected @@ -361,14 +170,33 @@ static void usb_release_dev(struct device *dev) udev = to_usb_device(dev); +#ifdef CONFIG_PM + cancel_delayed_work(&udev->autosuspend); + flush_scheduled_work(); +#endif usb_destroy_configuration(udev); - usb_bus_put(udev->bus); + usb_put_hcd(bus_to_hcd(udev->bus)); kfree(udev->product); kfree(udev->manufacturer); kfree(udev->serial); kfree(udev); } +#ifdef CONFIG_PM + +/* usb_autosuspend_work - callback routine to autosuspend a USB device */ +static void usb_autosuspend_work(void *_udev) +{ + struct usb_device *udev = _udev; + + mutex_lock_nested(&udev->pm_mutex, udev->level); + udev->auto_pm = 1; + usb_suspend_both(udev, PMSG_SUSPEND); + mutex_unlock(&udev->pm_mutex); +} + +#endif + /** * usb_alloc_dev - usb device constructor (usbcore-internal) * @parent: hub to which device is connected; null to allocate a root hub @@ -390,8 +218,7 @@ usb_alloc_dev(struct usb_device *parent, struct usb_bus *bus, unsigned port1) if (!dev) return NULL; - bus = usb_bus_get(bus); - if (!bus) { + if (!usb_get_hcd(bus_to_hcd(bus))) { kfree(dev); return NULL; } @@ -399,11 +226,12 @@ usb_alloc_dev(struct usb_device *parent, struct usb_bus *bus, unsigned port1) device_initialize(&dev->dev); dev->dev.bus = &usb_bus_type; dev->dev.dma_mask = bus->controller->dma_mask; - dev->dev.driver_data = &usb_generic_driver_data; - dev->dev.driver = &usb_generic_driver; dev->dev.release = usb_release_dev; dev->state = USB_STATE_ATTACHED; + /* This magic assignment distinguishes devices from interfaces */ + dev->dev.platform_data = &usb_generic_driver; + INIT_LIST_HEAD(&dev->ep0.urb_list); dev->ep0.desc.bLength = USB_DT_ENDPOINT_SIZE; dev->ep0.desc.bDescriptorType = USB_DT_ENDPOINT; @@ -444,6 +272,10 @@ usb_alloc_dev(struct usb_device *parent, struct usb_bus *bus, unsigned port1) dev->parent = parent; INIT_LIST_HEAD(&dev->filelist); +#ifdef CONFIG_PM + mutex_init(&dev->pm_mutex); + INIT_WORK(&dev->autosuspend, usb_autosuspend_work, dev); +#endif return dev; } @@ -549,7 +381,7 @@ void usb_put_intf(struct usb_interface *intf) * case the driver already owns the device lock.) */ int usb_lock_device_for_reset(struct usb_device *udev, - struct usb_interface *iface) + const struct usb_interface *iface) { unsigned long jiffies_expire = jiffies + HZ; @@ -672,7 +504,139 @@ exit: */ int usb_get_current_frame_number(struct usb_device *dev) { - return dev->bus->op->get_frame_number (dev); + return usb_hcd_get_frame_number (dev); +} + +/** + * usb_endpoint_dir_in - check if the endpoint has IN direction + * @epd: endpoint to be checked + * + * Returns true if the endpoint is of type IN, otherwise it returns false. + */ +int usb_endpoint_dir_in(const struct usb_endpoint_descriptor *epd) +{ + return ((epd->bEndpointAddress & USB_ENDPOINT_DIR_MASK) == USB_DIR_IN); +} + +/** + * usb_endpoint_dir_out - check if the endpoint has OUT direction + * @epd: endpoint to be checked + * + * Returns true if the endpoint is of type OUT, otherwise it returns false. + */ +int usb_endpoint_dir_out(const struct usb_endpoint_descriptor *epd) +{ + return ((epd->bEndpointAddress & USB_ENDPOINT_DIR_MASK) == USB_DIR_OUT); +} + +/** + * usb_endpoint_xfer_bulk - check if the endpoint has bulk transfer type + * @epd: endpoint to be checked + * + * Returns true if the endpoint is of type bulk, otherwise it returns false. + */ +int usb_endpoint_xfer_bulk(const struct usb_endpoint_descriptor *epd) +{ + return ((epd->bmAttributes & USB_ENDPOINT_XFERTYPE_MASK) == + USB_ENDPOINT_XFER_BULK); +} + +/** + * usb_endpoint_xfer_int - check if the endpoint has interrupt transfer type + * @epd: endpoint to be checked + * + * Returns true if the endpoint is of type interrupt, otherwise it returns + * false. + */ +int usb_endpoint_xfer_int(const struct usb_endpoint_descriptor *epd) +{ + return ((epd->bmAttributes & USB_ENDPOINT_XFERTYPE_MASK) == + USB_ENDPOINT_XFER_INT); +} + +/** + * usb_endpoint_xfer_isoc - check if the endpoint has isochronous transfer type + * @epd: endpoint to be checked + * + * Returns true if the endpoint is of type isochronous, otherwise it returns + * false. + */ +int usb_endpoint_xfer_isoc(const struct usb_endpoint_descriptor *epd) +{ + return ((epd->bmAttributes & USB_ENDPOINT_XFERTYPE_MASK) == + USB_ENDPOINT_XFER_ISOC); +} + +/** + * usb_endpoint_is_bulk_in - check if the endpoint is bulk IN + * @epd: endpoint to be checked + * + * Returns true if the endpoint has bulk transfer type and IN direction, + * otherwise it returns false. + */ +int usb_endpoint_is_bulk_in(const struct usb_endpoint_descriptor *epd) +{ + return (usb_endpoint_xfer_bulk(epd) && usb_endpoint_dir_in(epd)); +} + +/** + * usb_endpoint_is_bulk_out - check if the endpoint is bulk OUT + * @epd: endpoint to be checked + * + * Returns true if the endpoint has bulk transfer type and OUT direction, + * otherwise it returns false. + */ +int usb_endpoint_is_bulk_out(const struct usb_endpoint_descriptor *epd) +{ + return (usb_endpoint_xfer_bulk(epd) && usb_endpoint_dir_out(epd)); +} + +/** + * usb_endpoint_is_int_in - check if the endpoint is interrupt IN + * @epd: endpoint to be checked + * + * Returns true if the endpoint has interrupt transfer type and IN direction, + * otherwise it returns false. + */ +int usb_endpoint_is_int_in(const struct usb_endpoint_descriptor *epd) +{ + return (usb_endpoint_xfer_int(epd) && usb_endpoint_dir_in(epd)); +} + +/** + * usb_endpoint_is_int_out - check if the endpoint is interrupt OUT + * @epd: endpoint to be checked + * + * Returns true if the endpoint has interrupt transfer type and OUT direction, + * otherwise it returns false. + */ +int usb_endpoint_is_int_out(const struct usb_endpoint_descriptor *epd) +{ + return (usb_endpoint_xfer_int(epd) && usb_endpoint_dir_out(epd)); +} + +/** + * usb_endpoint_is_isoc_in - check if the endpoint is isochronous IN + * @epd: endpoint to be checked + * + * Returns true if the endpoint has isochronous transfer type and IN direction, + * otherwise it returns false. + */ +int usb_endpoint_is_isoc_in(const struct usb_endpoint_descriptor *epd) +{ + return (usb_endpoint_xfer_isoc(epd) && usb_endpoint_dir_in(epd)); +} + +/** + * usb_endpoint_is_isoc_out - check if the endpoint is isochronous OUT + * @epd: endpoint to be checked + * + * Returns true if the endpoint has isochronous transfer type and OUT direction, + * otherwise it returns false. + */ +int usb_endpoint_is_isoc_out(const struct usb_endpoint_descriptor *epd) +{ + return (usb_endpoint_xfer_isoc(epd) && usb_endpoint_dir_out(epd)); } /*-------------------------------------------------------------------*/ @@ -737,9 +701,9 @@ void *usb_buffer_alloc ( dma_addr_t *dma ) { - if (!dev || !dev->bus || !dev->bus->op || !dev->bus->op->buffer_alloc) + if (!dev || !dev->bus) return NULL; - return dev->bus->op->buffer_alloc (dev->bus, size, mem_flags, dma); + return hcd_buffer_alloc (dev->bus, size, mem_flags, dma); } /** @@ -760,9 +724,11 @@ void usb_buffer_free ( dma_addr_t dma ) { - if (!dev || !dev->bus || !dev->bus->op || !dev->bus->op->buffer_free) - return; - dev->bus->op->buffer_free (dev->bus, size, addr, dma); + if (!dev || !dev->bus) + return; + if (!addr) + return; + hcd_buffer_free (dev->bus, size, addr, dma); } /** @@ -911,8 +877,8 @@ void usb_buffer_unmap (struct urb *urb) * * Reverse the effect of this call with usb_buffer_unmap_sg(). */ -int usb_buffer_map_sg (struct usb_device *dev, unsigned pipe, - struct scatterlist *sg, int nents) +int usb_buffer_map_sg(const struct usb_device *dev, unsigned pipe, + struct scatterlist *sg, int nents) { struct usb_bus *bus; struct device *controller; @@ -946,8 +912,8 @@ int usb_buffer_map_sg (struct usb_device *dev, unsigned pipe, * Use this when you are re-using a scatterlist's data buffers for * another USB request. */ -void usb_buffer_dmasync_sg (struct usb_device *dev, unsigned pipe, - struct scatterlist *sg, int n_hw_ents) +void usb_buffer_dmasync_sg(const struct usb_device *dev, unsigned pipe, + struct scatterlist *sg, int n_hw_ents) { struct usb_bus *bus; struct device *controller; @@ -972,8 +938,8 @@ void usb_buffer_dmasync_sg (struct usb_device *dev, unsigned pipe, * * Reverses the effect of usb_buffer_map_sg(). */ -void usb_buffer_unmap_sg (struct usb_device *dev, unsigned pipe, - struct scatterlist *sg, int n_hw_ents) +void usb_buffer_unmap_sg(const struct usb_device *dev, unsigned pipe, + struct scatterlist *sg, int n_hw_ents) { struct usb_bus *bus; struct device *controller; @@ -988,116 +954,6 @@ void usb_buffer_unmap_sg (struct usb_device *dev, unsigned pipe, usb_pipein (pipe) ? DMA_FROM_DEVICE : DMA_TO_DEVICE); } -static int verify_suspended(struct device *dev, void *unused) -{ - if (dev->driver == NULL) - return 0; - return (dev->power.power_state.event == PM_EVENT_ON) ? -EBUSY : 0; -} - -static int usb_generic_suspend(struct device *dev, pm_message_t message) -{ - struct usb_interface *intf; - struct usb_driver *driver; - int status; - - /* USB devices enter SUSPEND state through their hubs, but can be - * marked for FREEZE as soon as their children are already idled. - * But those semantics are useless, so we equate the two (sigh). - */ - if (dev->driver == &usb_generic_driver) { - if (dev->power.power_state.event == message.event) - return 0; - /* we need to rule out bogus requests through sysfs */ - status = device_for_each_child(dev, NULL, verify_suspended); - if (status) - return status; - return usb_suspend_device (to_usb_device(dev)); - } - - if ((dev->driver == NULL) || - (dev->driver_data == &usb_generic_driver_data)) - return 0; - - intf = to_usb_interface(dev); - driver = to_usb_driver(dev->driver); - - /* with no hardware, USB interfaces only use FREEZE and ON states */ - if (!is_active(intf)) - return 0; - - if (driver->suspend && driver->resume) { - status = driver->suspend(intf, message); - if (status) - dev_err(dev, "%s error %d\n", "suspend", status); - else - mark_quiesced(intf); - } else { - // FIXME else if there's no suspend method, disconnect... - dev_warn(dev, "no suspend for driver %s?\n", driver->name); - mark_quiesced(intf); - status = 0; - } - return status; -} - -static int usb_generic_resume(struct device *dev) -{ - struct usb_interface *intf; - struct usb_driver *driver; - struct usb_device *udev; - int status; - - if (dev->power.power_state.event == PM_EVENT_ON) - return 0; - - /* mark things as "on" immediately, no matter what errors crop up */ - dev->power.power_state.event = PM_EVENT_ON; - - /* devices resume through their hubs */ - if (dev->driver == &usb_generic_driver) { - udev = to_usb_device(dev); - if (udev->state == USB_STATE_NOTATTACHED) - return 0; - return usb_resume_device (to_usb_device(dev)); - } - - if ((dev->driver == NULL) || - (dev->driver_data == &usb_generic_driver_data)) { - dev->power.power_state.event = PM_EVENT_FREEZE; - return 0; - } - - intf = to_usb_interface(dev); - driver = to_usb_driver(dev->driver); - - udev = interface_to_usbdev(intf); - if (udev->state == USB_STATE_NOTATTACHED) - return 0; - - /* if driver was suspended, it has a resume method; - * however, sysfs can wrongly mark things as suspended - * (on the "no suspend method" FIXME path above) - */ - if (driver->resume) { - status = driver->resume(intf); - if (status) { - dev_err(dev, "%s error %d\n", "resume", status); - mark_quiesced(intf); - } - } else - dev_warn(dev, "no resume for driver %s?\n", driver->name); - return 0; -} - -struct bus_type usb_bus_type = { - .name = "usb", - .match = usb_device_match, - .uevent = usb_uevent, - .suspend = usb_generic_suspend, - .resume = usb_generic_resume, -}; - /* format to disable USB on kernel command line is: nousb */ __module_param_call("", nousb, param_set_bool, param_get_bool, &nousb, 0444); @@ -1141,7 +997,7 @@ static int __init usb_init(void) retval = usb_hub_init(); if (retval) goto hub_init_failed; - retval = driver_register(&usb_generic_driver); + retval = usb_register_device_driver(&usb_generic_driver, THIS_MODULE); if (!retval) goto out; @@ -1171,7 +1027,7 @@ static void __exit usb_exit(void) if (nousb) return; - driver_unregister(&usb_generic_driver); + usb_deregister_device_driver(&usb_generic_driver); usb_major_cleanup(); usbfs_cleanup(); usb_deregister(&usbfs_driver); @@ -1201,20 +1057,27 @@ EXPORT_SYMBOL(usb_hub_tt_clear_buffer); EXPORT_SYMBOL(usb_lock_device_for_reset); -EXPORT_SYMBOL(usb_driver_claim_interface); -EXPORT_SYMBOL(usb_driver_release_interface); EXPORT_SYMBOL(usb_find_interface); EXPORT_SYMBOL(usb_ifnum_to_if); EXPORT_SYMBOL(usb_altnum_to_altsetting); -EXPORT_SYMBOL(usb_reset_device); -EXPORT_SYMBOL(usb_reset_composite_device); - EXPORT_SYMBOL(__usb_get_extra_descriptor); EXPORT_SYMBOL(usb_find_device); EXPORT_SYMBOL(usb_get_current_frame_number); +EXPORT_SYMBOL_GPL(usb_endpoint_dir_in); +EXPORT_SYMBOL_GPL(usb_endpoint_dir_out); +EXPORT_SYMBOL_GPL(usb_endpoint_xfer_bulk); +EXPORT_SYMBOL_GPL(usb_endpoint_xfer_int); +EXPORT_SYMBOL_GPL(usb_endpoint_xfer_isoc); +EXPORT_SYMBOL_GPL(usb_endpoint_is_bulk_in); +EXPORT_SYMBOL_GPL(usb_endpoint_is_bulk_out); +EXPORT_SYMBOL_GPL(usb_endpoint_is_int_in); +EXPORT_SYMBOL_GPL(usb_endpoint_is_int_out); +EXPORT_SYMBOL_GPL(usb_endpoint_is_isoc_in); +EXPORT_SYMBOL_GPL(usb_endpoint_is_isoc_out); + EXPORT_SYMBOL (usb_buffer_alloc); EXPORT_SYMBOL (usb_buffer_free); diff --git a/drivers/usb/core/usb.h b/drivers/usb/core/usb.h index 49f69236b42..0c09ecced6e 100644 --- a/drivers/usb/core/usb.h +++ b/drivers/usb/core/usb.h @@ -1,10 +1,10 @@ /* Functions local to drivers/usb/core/ */ -extern void usb_create_sysfs_dev_files (struct usb_device *dev); +extern int usb_create_sysfs_dev_files (struct usb_device *dev); extern void usb_remove_sysfs_dev_files (struct usb_device *dev); -extern void usb_create_sysfs_intf_files (struct usb_interface *intf); +extern int usb_create_sysfs_intf_files (struct usb_interface *intf); extern void usb_remove_sysfs_intf_files (struct usb_interface *intf); -extern void usb_create_ep_files(struct device *parent, struct usb_host_endpoint *endpoint, +extern int usb_create_ep_files(struct device *parent, struct usb_host_endpoint *endpoint, struct usb_device *udev); extern void usb_remove_ep_files(struct usb_host_endpoint *endpoint); @@ -20,7 +20,6 @@ extern char *usb_cache_string(struct usb_device *udev, int index); extern int usb_set_configuration(struct usb_device *dev, int configuration); extern void usb_kick_khubd(struct usb_device *dev); -extern void usb_suspend_root_hub(struct usb_device *hdev); extern void usb_resume_root_hub(struct usb_device *dev); extern int usb_hub_init(void); @@ -30,28 +29,74 @@ extern void usb_major_cleanup(void); extern int usb_host_init(void); extern void usb_host_cleanup(void); -extern int usb_suspend_device(struct usb_device *dev); -extern int usb_resume_device(struct usb_device *dev); +#ifdef CONFIG_PM -extern struct device_driver usb_generic_driver; -extern int usb_generic_driver_data; -extern int usb_device_match(struct device *dev, struct device_driver *drv); +extern int usb_suspend_both(struct usb_device *udev, pm_message_t msg); +extern int usb_resume_both(struct usb_device *udev); +extern int usb_port_suspend(struct usb_device *dev); +extern int usb_port_resume(struct usb_device *dev); + +#else + +#define usb_suspend_both(udev, msg) 0 +static inline int usb_resume_both(struct usb_device *udev) +{ + return 0; +} +#define usb_port_suspend(dev) 0 +#define usb_port_resume(dev) 0 + +#endif + +#ifdef CONFIG_USB_SUSPEND + +#define USB_AUTOSUSPEND_DELAY (HZ*2) + +extern void usb_autosuspend_device(struct usb_device *udev, int dec_busy_cnt); +extern int usb_autoresume_device(struct usb_device *udev, int inc_busy_cnt); + +#else + +#define usb_autosuspend_device(udev, dec_busy_cnt) do {} while (0) +#define usb_autoresume_device(udev, inc_busy_cnt) 0 + +#endif + +extern struct bus_type usb_bus_type; +extern struct usb_device_driver usb_generic_driver; + +/* Here's how we tell apart devices and interfaces. Luckily there's + * no such thing as a platform USB device, so we can steal the use + * of the platform_data field. */ + +static inline int is_usb_device(const struct device *dev) +{ + return dev->platform_data == &usb_generic_driver; +} + +/* Do the same for device drivers and interface drivers. */ + +static inline int is_usb_device_driver(struct device_driver *drv) +{ + return container_of(drv, struct usbdrv_wrap, driver)-> + for_devices; +} /* Interfaces and their "power state" are owned by usbcore */ static inline void mark_active(struct usb_interface *f) { - f->dev.power.power_state.event = PM_EVENT_ON; + f->is_active = 1; } static inline void mark_quiesced(struct usb_interface *f) { - f->dev.power.power_state.event = PM_EVENT_FREEZE; + f->is_active = 0; } -static inline int is_active(struct usb_interface *f) +static inline int is_active(const struct usb_interface *f) { - return f->dev.power.power_state.event == PM_EVENT_ON; + return f->is_active; } @@ -59,9 +104,10 @@ static inline int is_active(struct usb_interface *f) extern const char *usbcore_name; /* usbfs stuff */ +extern struct mutex usbfs_mutex; extern struct usb_driver usbfs_driver; -extern struct file_operations usbfs_devices_fops; -extern struct file_operations usbfs_device_file_operations; +extern const struct file_operations usbfs_devices_fops; +extern const struct file_operations usbfs_device_file_operations; extern void usbfs_conn_disc_event(void); extern int usbdev_init(void); diff --git a/drivers/usb/gadget/Kconfig b/drivers/usb/gadget/Kconfig index 1a32d96774b..8e5dd6f29d0 100644 --- a/drivers/usb/gadget/Kconfig +++ b/drivers/usb/gadget/Kconfig @@ -26,7 +26,7 @@ config USB_GADGET you need a low level bus controller driver, and some software talking to it. Peripheral controllers are often discrete silicon, or are integrated with the CPU in a microcontroller. The more - familiar host side controllers have names like like "EHCI", "OHCI", + familiar host side controllers have names like "EHCI", "OHCI", or "UHCI", and are usually integrated into southbridges on PC motherboards. @@ -404,6 +404,20 @@ config USB_G_SERIAL which includes instructions and a "driver info file" needed to make MS-Windows work with this driver. +config USB_MIDI_GADGET + tristate "MIDI Gadget (EXPERIMENTAL)" + depends on SND && EXPERIMENTAL + select SND_RAWMIDI + help + The MIDI Gadget acts as a USB Audio device, with one MIDI + input and one MIDI output. These MIDI jacks appear as + a sound "card" in the ALSA sound system. Other MIDI + connections can then be made on the gadget system, using + ALSA's aconnect utility etc. + + Say "y" to link the driver statically, or "m" to build a + dynamically linked module called "g_midi". + # put drivers that need isochronous transfer support (for audio # or video class gadget drivers), or specific hardware, here. diff --git a/drivers/usb/gadget/Makefile b/drivers/usb/gadget/Makefile index 5a28e61392e..e71e086a1cf 100644 --- a/drivers/usb/gadget/Makefile +++ b/drivers/usb/gadget/Makefile @@ -15,6 +15,7 @@ obj-$(CONFIG_USB_AT91) += at91_udc.o g_zero-objs := zero.o usbstring.o config.o epautoconf.o g_ether-objs := ether.o usbstring.o config.o epautoconf.o g_serial-objs := serial.o usbstring.o config.o epautoconf.o +g_midi-objs := gmidi.o usbstring.o config.o epautoconf.o gadgetfs-objs := inode.o g_file_storage-objs := file_storage.o usbstring.o config.o \ epautoconf.o @@ -28,4 +29,5 @@ obj-$(CONFIG_USB_ETH) += g_ether.o obj-$(CONFIG_USB_GADGETFS) += gadgetfs.o obj-$(CONFIG_USB_FILE_STORAGE) += g_file_storage.o obj-$(CONFIG_USB_G_SERIAL) += g_serial.o +obj-$(CONFIG_USB_MIDI_GADGET) += g_midi.o diff --git a/drivers/usb/gadget/at91_udc.c b/drivers/usb/gadget/at91_udc.c index cfebca05ead..d00958a01cf 100644 --- a/drivers/usb/gadget/at91_udc.c +++ b/drivers/usb/gadget/at91_udc.c @@ -247,7 +247,7 @@ static int proc_udc_open(struct inode *inode, struct file *file) return single_open(file, proc_udc_show, PDE(inode)->data); } -static struct file_operations proc_ops = { +static const struct file_operations proc_ops = { .open = proc_udc_open, .read = seq_read, .llseek = seq_lseek, diff --git a/drivers/usb/gadget/dummy_hcd.c b/drivers/usb/gadget/dummy_hcd.c index 7d1c22c3495..fdab97a27c0 100644 --- a/drivers/usb/gadget/dummy_hcd.c +++ b/drivers/usb/gadget/dummy_hcd.c @@ -889,11 +889,9 @@ EXPORT_SYMBOL (net2280_set_fifo_mode); static void dummy_gadget_release (struct device *dev) { -#if 0 /* usb_bus_put isn't EXPORTed! */ struct dummy *dum = gadget_dev_to_dummy (dev); - usb_bus_put (&dummy_to_hcd (dum)->self); -#endif + usb_put_hcd (dummy_to_hcd (dum)); } static int dummy_udc_probe (struct platform_device *pdev) @@ -915,9 +913,7 @@ static int dummy_udc_probe (struct platform_device *pdev) if (rc < 0) return rc; -#if 0 /* usb_bus_get isn't EXPORTed! */ - usb_bus_get (&dummy_to_hcd (dum)->self); -#endif + usb_get_hcd (dummy_to_hcd (dum)); platform_set_drvdata (pdev, dum); device_create_file (&dum->gadget.dev, &dev_attr_function); diff --git a/drivers/usb/gadget/ether.c b/drivers/usb/gadget/ether.c index 30299c620d9..366dc0a9e52 100644 --- a/drivers/usb/gadget/ether.c +++ b/drivers/usb/gadget/ether.c @@ -262,7 +262,7 @@ MODULE_PARM_DESC(host_addr, "Host Ethernet Address"); #define DEV_CONFIG_CDC #endif -#ifdef CONFIG_USB_GADGET_MUSBHDRC +#ifdef CONFIG_USB_GADGET_MUSB_HDRC #define DEV_CONFIG_CDC #endif @@ -2014,7 +2014,7 @@ rndis_control_ack_complete (struct usb_ep *ep, struct usb_request *req) static int rndis_control_ack (struct net_device *net) { struct eth_dev *dev = netdev_priv(net); - u32 length; + int length; struct usb_request *resp = dev->stat_req; /* in case RNDIS calls this after disconnect */ @@ -2230,6 +2230,9 @@ eth_bind (struct usb_gadget *gadget) if (gadget_is_pxa (gadget)) { /* pxa doesn't support altsettings */ cdc = 0; + } else if (gadget_is_musbhdrc(gadget)) { + /* reduce tx dma overhead by avoiding special cases */ + zlp = 0; } else if (gadget_is_sh(gadget)) { /* sh doesn't support multiple interfaces or configs */ cdc = 0; @@ -2564,7 +2567,7 @@ static struct usb_gadget_driver eth_driver = { .function = (char *) driver_desc, .bind = eth_bind, - .unbind = __exit_p(eth_unbind), + .unbind = eth_unbind, .setup = eth_setup, .disconnect = eth_disconnect, diff --git a/drivers/usb/gadget/gmidi.c b/drivers/usb/gadget/gmidi.c new file mode 100644 index 00000000000..b68cecd5741 --- /dev/null +++ b/drivers/usb/gadget/gmidi.c @@ -0,0 +1,1337 @@ +/* + * gmidi.c -- USB MIDI Gadget Driver + * + * Copyright (C) 2006 Thumtronics Pty Ltd. + * Developed for Thumtronics by Grey Innovation + * Ben Williamson <ben.williamson@greyinnovation.com> + * + * This software is distributed under the terms of the GNU General Public + * License ("GPL") version 2, as published by the Free Software Foundation. + * + * This code is based in part on: + * + * Gadget Zero driver, Copyright (C) 2003-2004 David Brownell. + * USB Audio driver, Copyright (C) 2002 by Takashi Iwai. + * USB MIDI driver, Copyright (C) 2002-2005 Clemens Ladisch. + * + * Refer to the USB Device Class Definition for MIDI Devices: + * http://www.usb.org/developers/devclass_docs/midi10.pdf + */ + +#define DEBUG 1 +// #define VERBOSE + +#include <linux/config.h> +#include <linux/module.h> +#include <linux/kernel.h> +#include <linux/delay.h> +#include <linux/errno.h> +#include <linux/init.h> +#include <linux/utsname.h> +#include <linux/device.h> +#include <linux/moduleparam.h> + +#include <sound/driver.h> +#include <sound/core.h> +#include <sound/initval.h> +#include <sound/rawmidi.h> + +#include <linux/usb_ch9.h> +#include <linux/usb_gadget.h> +#include <linux/usb/audio.h> +#include <linux/usb/midi.h> + +#include "gadget_chips.h" + +MODULE_AUTHOR("Ben Williamson"); +MODULE_LICENSE("GPL v2"); + +#define DRIVER_VERSION "25 Jul 2006" + +static const char shortname[] = "g_midi"; +static const char longname[] = "MIDI Gadget"; + +static int index = SNDRV_DEFAULT_IDX1; +static char *id = SNDRV_DEFAULT_STR1; + +module_param(index, int, 0444); +MODULE_PARM_DESC(index, "Index value for the USB MIDI Gadget adapter."); +module_param(id, charp, 0444); +MODULE_PARM_DESC(id, "ID string for the USB MIDI Gadget adapter."); + +/* Some systems will want different product identifers published in the + * device descriptor, either numbers or strings or both. These string + * parameters are in UTF-8 (superset of ASCII's 7 bit characters). + */ + +static ushort idVendor; +module_param(idVendor, ushort, S_IRUGO); +MODULE_PARM_DESC(idVendor, "USB Vendor ID"); + +static ushort idProduct; +module_param(idProduct, ushort, S_IRUGO); +MODULE_PARM_DESC(idProduct, "USB Product ID"); + +static ushort bcdDevice; +module_param(bcdDevice, ushort, S_IRUGO); +MODULE_PARM_DESC(bcdDevice, "USB Device version (BCD)"); + +static char *iManufacturer; +module_param(iManufacturer, charp, S_IRUGO); +MODULE_PARM_DESC(iManufacturer, "USB Manufacturer string"); + +static char *iProduct; +module_param(iProduct, charp, S_IRUGO); +MODULE_PARM_DESC(iProduct, "USB Product string"); + +static char *iSerialNumber; +module_param(iSerialNumber, charp, S_IRUGO); +MODULE_PARM_DESC(iSerialNumber, "SerialNumber"); + +/* + * this version autoconfigures as much as possible, + * which is reasonable for most "bulk-only" drivers. + */ +static const char *EP_IN_NAME; +static const char *EP_OUT_NAME; + + +/* big enough to hold our biggest descriptor */ +#define USB_BUFSIZ 256 + + +/* This is a gadget, and the IN/OUT naming is from the host's perspective. + USB -> OUT endpoint -> rawmidi + USB <- IN endpoint <- rawmidi */ +struct gmidi_in_port { + struct gmidi_device* dev; + int active; + uint8_t cable; /* cable number << 4 */ + uint8_t state; +#define STATE_UNKNOWN 0 +#define STATE_1PARAM 1 +#define STATE_2PARAM_1 2 +#define STATE_2PARAM_2 3 +#define STATE_SYSEX_0 4 +#define STATE_SYSEX_1 5 +#define STATE_SYSEX_2 6 + uint8_t data[2]; +}; + +struct gmidi_device { + spinlock_t lock; + struct usb_gadget *gadget; + struct usb_request *req; /* for control responses */ + u8 config; + struct usb_ep *in_ep, *out_ep; + struct snd_card *card; + struct snd_rawmidi *rmidi; + struct snd_rawmidi_substream *in_substream; + struct snd_rawmidi_substream *out_substream; + + /* For the moment we only support one port in + each direction, but in_port is kept as a + separate struct so we can have more later. */ + struct gmidi_in_port in_port; + unsigned long out_triggered; + struct tasklet_struct tasklet; +}; + +static void gmidi_transmit(struct gmidi_device* dev, struct usb_request* req); + + +#define xprintk(d,level,fmt,args...) \ + dev_printk(level , &(d)->gadget->dev , fmt , ## args) + +#ifdef DEBUG +#define DBG(dev,fmt,args...) \ + xprintk(dev , KERN_DEBUG , fmt , ## args) +#else +#define DBG(dev,fmt,args...) \ + do { } while (0) +#endif /* DEBUG */ + +#ifdef VERBOSE +#define VDBG DBG +#else +#define VDBG(dev,fmt,args...) \ + do { } while (0) +#endif /* VERBOSE */ + +#define ERROR(dev,fmt,args...) \ + xprintk(dev , KERN_ERR , fmt , ## args) +#define WARN(dev,fmt,args...) \ + xprintk(dev , KERN_WARNING , fmt , ## args) +#define INFO(dev,fmt,args...) \ + xprintk(dev , KERN_INFO , fmt , ## args) + + +static unsigned buflen = 256; +static unsigned qlen = 32; + +module_param(buflen, uint, S_IRUGO); +module_param(qlen, uint, S_IRUGO); + + +/* Thanks to Grey Innovation for donating this product ID. + * + * DO NOT REUSE THESE IDs with a protocol-incompatible driver!! Ever!! + * Instead: allocate your own, using normal USB-IF procedures. + */ +#define DRIVER_VENDOR_NUM 0x17b3 /* Grey Innovation */ +#define DRIVER_PRODUCT_NUM 0x0004 /* Linux-USB "MIDI Gadget" */ + + +/* + * DESCRIPTORS ... most are static, but strings and (full) + * configuration descriptors are built on demand. + */ + +#define STRING_MANUFACTURER 25 +#define STRING_PRODUCT 42 +#define STRING_SERIAL 101 +#define STRING_MIDI_GADGET 250 + +/* We only have the one configuration, it's number 1. */ +#define GMIDI_CONFIG 1 + +/* We have two interfaces- AudioControl and MIDIStreaming */ +#define GMIDI_AC_INTERFACE 0 +#define GMIDI_MS_INTERFACE 1 +#define GMIDI_NUM_INTERFACES 2 + +DECLARE_USB_AC_HEADER_DESCRIPTOR(1); +DECLARE_USB_MIDI_OUT_JACK_DESCRIPTOR(1); +DECLARE_USB_MS_ENDPOINT_DESCRIPTOR(1); + +/* B.1 Device Descriptor */ +static struct usb_device_descriptor device_desc = { + .bLength = USB_DT_DEVICE_SIZE, + .bDescriptorType = USB_DT_DEVICE, + .bcdUSB = __constant_cpu_to_le16(0x0200), + .bDeviceClass = USB_CLASS_PER_INTERFACE, + .idVendor = __constant_cpu_to_le16(DRIVER_VENDOR_NUM), + .idProduct = __constant_cpu_to_le16(DRIVER_PRODUCT_NUM), + .iManufacturer = STRING_MANUFACTURER, + .iProduct = STRING_PRODUCT, + .bNumConfigurations = 1, +}; + +/* B.2 Configuration Descriptor */ +static struct usb_config_descriptor config_desc = { + .bLength = USB_DT_CONFIG_SIZE, + .bDescriptorType = USB_DT_CONFIG, + /* compute wTotalLength on the fly */ + .bNumInterfaces = GMIDI_NUM_INTERFACES, + .bConfigurationValue = GMIDI_CONFIG, + .iConfiguration = STRING_MIDI_GADGET, + /* + * FIXME: When embedding this driver in a device, + * these need to be set to reflect the actual + * power properties of the device. Is it selfpowered? + */ + .bmAttributes = USB_CONFIG_ATT_ONE, + .bMaxPower = 1, +}; + +/* B.3.1 Standard AC Interface Descriptor */ +static const struct usb_interface_descriptor ac_interface_desc = { + .bLength = USB_DT_INTERFACE_SIZE, + .bDescriptorType = USB_DT_INTERFACE, + .bInterfaceNumber = GMIDI_AC_INTERFACE, + .bNumEndpoints = 0, + .bInterfaceClass = USB_CLASS_AUDIO, + .bInterfaceSubClass = USB_SUBCLASS_AUDIOCONTROL, + .iInterface = STRING_MIDI_GADGET, +}; + +/* B.3.2 Class-Specific AC Interface Descriptor */ +static const struct usb_ac_header_descriptor_1 ac_header_desc = { + .bLength = USB_DT_AC_HEADER_SIZE(1), + .bDescriptorType = USB_DT_CS_INTERFACE, + .bDescriptorSubtype = USB_MS_HEADER, + .bcdADC = __constant_cpu_to_le16(0x0100), + .wTotalLength = USB_DT_AC_HEADER_SIZE(1), + .bInCollection = 1, + .baInterfaceNr = { + [0] = GMIDI_MS_INTERFACE, + } +}; + +/* B.4.1 Standard MS Interface Descriptor */ +static const struct usb_interface_descriptor ms_interface_desc = { + .bLength = USB_DT_INTERFACE_SIZE, + .bDescriptorType = USB_DT_INTERFACE, + .bInterfaceNumber = GMIDI_MS_INTERFACE, + .bNumEndpoints = 2, + .bInterfaceClass = USB_CLASS_AUDIO, + .bInterfaceSubClass = USB_SUBCLASS_MIDISTREAMING, + .iInterface = STRING_MIDI_GADGET, +}; + +/* B.4.2 Class-Specific MS Interface Descriptor */ +static const struct usb_ms_header_descriptor ms_header_desc = { + .bLength = USB_DT_MS_HEADER_SIZE, + .bDescriptorType = USB_DT_CS_INTERFACE, + .bDescriptorSubtype = USB_MS_HEADER, + .bcdMSC = __constant_cpu_to_le16(0x0100), + .wTotalLength = USB_DT_MS_HEADER_SIZE + + 2*USB_DT_MIDI_IN_SIZE + + 2*USB_DT_MIDI_OUT_SIZE(1), +}; + +#define JACK_IN_EMB 1 +#define JACK_IN_EXT 2 +#define JACK_OUT_EMB 3 +#define JACK_OUT_EXT 4 + +/* B.4.3 MIDI IN Jack Descriptors */ +static const struct usb_midi_in_jack_descriptor jack_in_emb_desc = { + .bLength = USB_DT_MIDI_IN_SIZE, + .bDescriptorType = USB_DT_CS_INTERFACE, + .bDescriptorSubtype = USB_MS_MIDI_IN_JACK, + .bJackType = USB_MS_EMBEDDED, + .bJackID = JACK_IN_EMB, +}; + +static const struct usb_midi_in_jack_descriptor jack_in_ext_desc = { + .bLength = USB_DT_MIDI_IN_SIZE, + .bDescriptorType = USB_DT_CS_INTERFACE, + .bDescriptorSubtype = USB_MS_MIDI_IN_JACK, + .bJackType = USB_MS_EXTERNAL, + .bJackID = JACK_IN_EXT, +}; + +/* B.4.4 MIDI OUT Jack Descriptors */ +static const struct usb_midi_out_jack_descriptor_1 jack_out_emb_desc = { + .bLength = USB_DT_MIDI_OUT_SIZE(1), + .bDescriptorType = USB_DT_CS_INTERFACE, + .bDescriptorSubtype = USB_MS_MIDI_OUT_JACK, + .bJackType = USB_MS_EMBEDDED, + .bJackID = JACK_OUT_EMB, + .bNrInputPins = 1, + .pins = { + [0] = { + .baSourceID = JACK_IN_EXT, + .baSourcePin = 1, + } + } +}; + +static const struct usb_midi_out_jack_descriptor_1 jack_out_ext_desc = { + .bLength = USB_DT_MIDI_OUT_SIZE(1), + .bDescriptorType = USB_DT_CS_INTERFACE, + .bDescriptorSubtype = USB_MS_MIDI_OUT_JACK, + .bJackType = USB_MS_EXTERNAL, + .bJackID = JACK_OUT_EXT, + .bNrInputPins = 1, + .pins = { + [0] = { + .baSourceID = JACK_IN_EMB, + .baSourcePin = 1, + } + } +}; + +/* B.5.1 Standard Bulk OUT Endpoint Descriptor */ +static struct usb_endpoint_descriptor bulk_out_desc = { + .bLength = USB_DT_ENDPOINT_AUDIO_SIZE, + .bDescriptorType = USB_DT_ENDPOINT, + .bEndpointAddress = USB_DIR_OUT, + .bmAttributes = USB_ENDPOINT_XFER_BULK, +}; + +/* B.5.2 Class-specific MS Bulk OUT Endpoint Descriptor */ +static const struct usb_ms_endpoint_descriptor_1 ms_out_desc = { + .bLength = USB_DT_MS_ENDPOINT_SIZE(1), + .bDescriptorType = USB_DT_CS_ENDPOINT, + .bDescriptorSubtype = USB_MS_GENERAL, + .bNumEmbMIDIJack = 1, + .baAssocJackID = { + [0] = JACK_IN_EMB, + } +}; + +/* B.6.1 Standard Bulk IN Endpoint Descriptor */ +static struct usb_endpoint_descriptor bulk_in_desc = { + .bLength = USB_DT_ENDPOINT_AUDIO_SIZE, + .bDescriptorType = USB_DT_ENDPOINT, + .bEndpointAddress = USB_DIR_IN, + .bmAttributes = USB_ENDPOINT_XFER_BULK, +}; + +/* B.6.2 Class-specific MS Bulk IN Endpoint Descriptor */ +static const struct usb_ms_endpoint_descriptor_1 ms_in_desc = { + .bLength = USB_DT_MS_ENDPOINT_SIZE(1), + .bDescriptorType = USB_DT_CS_ENDPOINT, + .bDescriptorSubtype = USB_MS_GENERAL, + .bNumEmbMIDIJack = 1, + .baAssocJackID = { + [0] = JACK_OUT_EMB, + } +}; + +static const struct usb_descriptor_header *gmidi_function [] = { + (struct usb_descriptor_header *)&ac_interface_desc, + (struct usb_descriptor_header *)&ac_header_desc, + (struct usb_descriptor_header *)&ms_interface_desc, + + (struct usb_descriptor_header *)&ms_header_desc, + (struct usb_descriptor_header *)&jack_in_emb_desc, + (struct usb_descriptor_header *)&jack_in_ext_desc, + (struct usb_descriptor_header *)&jack_out_emb_desc, + (struct usb_descriptor_header *)&jack_out_ext_desc, + /* If you add more jacks, update ms_header_desc.wTotalLength */ + + (struct usb_descriptor_header *)&bulk_out_desc, + (struct usb_descriptor_header *)&ms_out_desc, + (struct usb_descriptor_header *)&bulk_in_desc, + (struct usb_descriptor_header *)&ms_in_desc, + NULL, +}; + +static char manufacturer[50]; +static char product_desc[40] = "MIDI Gadget"; +static char serial_number[20]; + +/* static strings, in UTF-8 */ +static struct usb_string strings [] = { + { STRING_MANUFACTURER, manufacturer, }, + { STRING_PRODUCT, product_desc, }, + { STRING_SERIAL, serial_number, }, + { STRING_MIDI_GADGET, longname, }, + { } /* end of list */ +}; + +static struct usb_gadget_strings stringtab = { + .language = 0x0409, /* en-us */ + .strings = strings, +}; + +static int config_buf(struct usb_gadget *gadget, + u8 *buf, u8 type, unsigned index) +{ + int len; + + /* only one configuration */ + if (index != 0) { + return -EINVAL; + } + len = usb_gadget_config_buf(&config_desc, + buf, USB_BUFSIZ, gmidi_function); + if (len < 0) { + return len; + } + ((struct usb_config_descriptor *)buf)->bDescriptorType = type; + return len; +} + +static struct usb_request* alloc_ep_req(struct usb_ep *ep, unsigned length) +{ + struct usb_request *req; + + req = usb_ep_alloc_request(ep, GFP_ATOMIC); + if (req) { + req->length = length; + req->buf = kmalloc(length, GFP_ATOMIC); + if (!req->buf) { + usb_ep_free_request(ep, req); + req = NULL; + } + } + return req; +} + +static void free_ep_req(struct usb_ep *ep, struct usb_request *req) +{ + kfree(req->buf); + usb_ep_free_request(ep, req); +} + +static const uint8_t gmidi_cin_length[] = { + 0, 0, 2, 3, 3, 1, 2, 3, 3, 3, 3, 3, 2, 2, 3, 1 +}; + +/* + * Receives a chunk of MIDI data. + */ +static void gmidi_read_data(struct usb_ep *ep, int cable, + uint8_t* data, int length) +{ + struct gmidi_device *dev = ep->driver_data; + /* cable is ignored, because for now we only have one. */ + + if (!dev->out_substream) { + /* Nobody is listening - throw it on the floor. */ + return; + } + if (!test_bit(dev->out_substream->number, &dev->out_triggered)) { + return; + } + snd_rawmidi_receive(dev->out_substream, data, length); +} + +static void gmidi_handle_out_data(struct usb_ep *ep, struct usb_request *req) +{ + unsigned i; + u8 *buf = req->buf; + + for (i = 0; i + 3 < req->actual; i += 4) { + if (buf[i] != 0) { + int cable = buf[i] >> 4; + int length = gmidi_cin_length[buf[i] & 0x0f]; + gmidi_read_data(ep, cable, &buf[i + 1], length); + } + } +} + +static void gmidi_complete(struct usb_ep *ep, struct usb_request *req) +{ + struct gmidi_device *dev = ep->driver_data; + int status = req->status; + + switch (status) { + case 0: /* normal completion */ + if (ep == dev->out_ep) { + /* we received stuff. + req is queued again, below */ + gmidi_handle_out_data(ep, req); + } else if (ep == dev->in_ep) { + /* our transmit completed. + see if there's more to go. + gmidi_transmit eats req, don't queue it again. */ + gmidi_transmit(dev, req); + return; + } + break; + + /* this endpoint is normally active while we're configured */ + case -ECONNABORTED: /* hardware forced ep reset */ + case -ECONNRESET: /* request dequeued */ + case -ESHUTDOWN: /* disconnect from host */ + VDBG(dev, "%s gone (%d), %d/%d\n", ep->name, status, + req->actual, req->length); + if (ep == dev->out_ep) { + gmidi_handle_out_data(ep, req); + } + free_ep_req(ep, req); + return; + + case -EOVERFLOW: /* buffer overrun on read means that + * we didn't provide a big enough + * buffer. + */ + default: + DBG(dev, "%s complete --> %d, %d/%d\n", ep->name, + status, req->actual, req->length); + break; + case -EREMOTEIO: /* short read */ + break; + } + + status = usb_ep_queue(ep, req, GFP_ATOMIC); + if (status) { + ERROR(dev, "kill %s: resubmit %d bytes --> %d\n", + ep->name, req->length, status); + usb_ep_set_halt(ep); + /* FIXME recover later ... somehow */ + } +} + +static int set_gmidi_config(struct gmidi_device *dev, gfp_t gfp_flags) +{ + int err = 0; + struct usb_request *req; + struct usb_ep* ep; + unsigned i; + + err = usb_ep_enable(dev->in_ep, &bulk_in_desc); + if (err) { + ERROR(dev, "can't start %s: %d\n", dev->in_ep->name, err); + goto fail; + } + dev->in_ep->driver_data = dev; + + err = usb_ep_enable(dev->out_ep, &bulk_out_desc); + if (err) { + ERROR(dev, "can't start %s: %d\n", dev->out_ep->name, err); + goto fail; + } + dev->out_ep->driver_data = dev; + + /* allocate a bunch of read buffers and queue them all at once. */ + ep = dev->out_ep; + for (i = 0; i < qlen && err == 0; i++) { + req = alloc_ep_req(ep, buflen); + if (req) { + req->complete = gmidi_complete; + err = usb_ep_queue(ep, req, GFP_ATOMIC); + if (err) { + DBG(dev, "%s queue req: %d\n", ep->name, err); + } + } else { + err = -ENOMEM; + } + } +fail: + /* caller is responsible for cleanup on error */ + return err; +} + + +static void gmidi_reset_config(struct gmidi_device *dev) +{ + if (dev->config == 0) { + return; + } + + DBG(dev, "reset config\n"); + + /* just disable endpoints, forcing completion of pending i/o. + * all our completion handlers free their requests in this case. + */ + usb_ep_disable(dev->in_ep); + usb_ep_disable(dev->out_ep); + dev->config = 0; +} + +/* change our operational config. this code must agree with the code + * that returns config descriptors, and altsetting code. + * + * it's also responsible for power management interactions. some + * configurations might not work with our current power sources. + * + * note that some device controller hardware will constrain what this + * code can do, perhaps by disallowing more than one configuration or + * by limiting configuration choices (like the pxa2xx). + */ +static int +gmidi_set_config(struct gmidi_device *dev, unsigned number, gfp_t gfp_flags) +{ + int result = 0; + struct usb_gadget *gadget = dev->gadget; + +#if 0 + /* FIXME */ + /* Hacking this bit out fixes a bug where on receipt of two + USB_REQ_SET_CONFIGURATION messages, we end up with no + buffered OUT requests waiting for data. This is clearly + hiding a bug elsewhere, because if the config didn't + change then we really shouldn't do anything. */ + /* Having said that, when we do "change" from config 1 + to config 1, we at least gmidi_reset_config() which + clears out any requests on endpoints, so it's not like + we leak or anything. */ + if (number == dev->config) { + return 0; + } +#endif + + if (gadget_is_sa1100(gadget) && dev->config) { + /* tx fifo is full, but we can't clear it...*/ + INFO(dev, "can't change configurations\n"); + return -ESPIPE; + } + gmidi_reset_config(dev); + + switch (number) { + case GMIDI_CONFIG: + result = set_gmidi_config(dev, gfp_flags); + break; + default: + result = -EINVAL; + /* FALL THROUGH */ + case 0: + return result; + } + + if (!result && (!dev->in_ep || !dev->out_ep)) { + result = -ENODEV; + } + if (result) { + gmidi_reset_config(dev); + } else { + char *speed; + + switch (gadget->speed) { + case USB_SPEED_LOW: speed = "low"; break; + case USB_SPEED_FULL: speed = "full"; break; + case USB_SPEED_HIGH: speed = "high"; break; + default: speed = "?"; break; + } + + dev->config = number; + INFO(dev, "%s speed\n", speed); + } + return result; +} + + +static void gmidi_setup_complete(struct usb_ep *ep, struct usb_request *req) +{ + if (req->status || req->actual != req->length) { + DBG((struct gmidi_device *) ep->driver_data, + "setup complete --> %d, %d/%d\n", + req->status, req->actual, req->length); + } +} + +/* + * The setup() callback implements all the ep0 functionality that's + * not handled lower down, in hardware or the hardware driver (like + * device and endpoint feature flags, and their status). It's all + * housekeeping for the gadget function we're implementing. Most of + * the work is in config-specific setup. + */ +static int gmidi_setup(struct usb_gadget *gadget, + const struct usb_ctrlrequest *ctrl) +{ + struct gmidi_device *dev = get_gadget_data(gadget); + struct usb_request *req = dev->req; + int value = -EOPNOTSUPP; + u16 w_index = le16_to_cpu(ctrl->wIndex); + u16 w_value = le16_to_cpu(ctrl->wValue); + u16 w_length = le16_to_cpu(ctrl->wLength); + + /* usually this stores reply data in the pre-allocated ep0 buffer, + * but config change events will reconfigure hardware. + */ + req->zero = 0; + switch (ctrl->bRequest) { + + case USB_REQ_GET_DESCRIPTOR: + if (ctrl->bRequestType != USB_DIR_IN) { + goto unknown; + } + switch (w_value >> 8) { + + case USB_DT_DEVICE: + value = min(w_length, (u16) sizeof(device_desc)); + memcpy(req->buf, &device_desc, value); + break; + case USB_DT_CONFIG: + value = config_buf(gadget, req->buf, + w_value >> 8, + w_value & 0xff); + if (value >= 0) { + value = min(w_length, (u16)value); + } + break; + + case USB_DT_STRING: + /* wIndex == language code. + * this driver only handles one language, you can + * add string tables for other languages, using + * any UTF-8 characters + */ + value = usb_gadget_get_string(&stringtab, + w_value & 0xff, req->buf); + if (value >= 0) { + value = min(w_length, (u16)value); + } + break; + } + break; + + /* currently two configs, two speeds */ + case USB_REQ_SET_CONFIGURATION: + if (ctrl->bRequestType != 0) { + goto unknown; + } + if (gadget->a_hnp_support) { + DBG(dev, "HNP available\n"); + } else if (gadget->a_alt_hnp_support) { + DBG(dev, "HNP needs a different root port\n"); + } else { + VDBG(dev, "HNP inactive\n"); + } + spin_lock(&dev->lock); + value = gmidi_set_config(dev, w_value, GFP_ATOMIC); + spin_unlock(&dev->lock); + break; + case USB_REQ_GET_CONFIGURATION: + if (ctrl->bRequestType != USB_DIR_IN) { + goto unknown; + } + *(u8 *)req->buf = dev->config; + value = min(w_length, (u16)1); + break; + + /* until we add altsetting support, or other interfaces, + * only 0/0 are possible. pxa2xx only supports 0/0 (poorly) + * and already killed pending endpoint I/O. + */ + case USB_REQ_SET_INTERFACE: + if (ctrl->bRequestType != USB_RECIP_INTERFACE) { + goto unknown; + } + spin_lock(&dev->lock); + if (dev->config && w_index < GMIDI_NUM_INTERFACES + && w_value == 0) + { + u8 config = dev->config; + + /* resets interface configuration, forgets about + * previous transaction state (queued bufs, etc) + * and re-inits endpoint state (toggle etc) + * no response queued, just zero status == success. + * if we had more than one interface we couldn't + * use this "reset the config" shortcut. + */ + gmidi_reset_config(dev); + gmidi_set_config(dev, config, GFP_ATOMIC); + value = 0; + } + spin_unlock(&dev->lock); + break; + case USB_REQ_GET_INTERFACE: + if (ctrl->bRequestType != (USB_DIR_IN|USB_RECIP_INTERFACE)) { + goto unknown; + } + if (!dev->config) { + break; + } + if (w_index >= GMIDI_NUM_INTERFACES) { + value = -EDOM; + break; + } + *(u8 *)req->buf = 0; + value = min(w_length, (u16)1); + break; + + default: +unknown: + VDBG(dev, "unknown control req%02x.%02x v%04x i%04x l%d\n", + ctrl->bRequestType, ctrl->bRequest, + w_value, w_index, w_length); + } + + /* respond with data transfer before status phase? */ + if (value >= 0) { + req->length = value; + req->zero = value < w_length; + value = usb_ep_queue(gadget->ep0, req, GFP_ATOMIC); + if (value < 0) { + DBG(dev, "ep_queue --> %d\n", value); + req->status = 0; + gmidi_setup_complete(gadget->ep0, req); + } + } + + /* device either stalls (value < 0) or reports success */ + return value; +} + +static void gmidi_disconnect(struct usb_gadget *gadget) +{ + struct gmidi_device *dev = get_gadget_data(gadget); + unsigned long flags; + + spin_lock_irqsave(&dev->lock, flags); + gmidi_reset_config(dev); + + /* a more significant application might have some non-usb + * activities to quiesce here, saving resources like power + * or pushing the notification up a network stack. + */ + spin_unlock_irqrestore(&dev->lock, flags); + + /* next we may get setup() calls to enumerate new connections; + * or an unbind() during shutdown (including removing module). + */ +} + +static void /* __init_or_exit */ gmidi_unbind(struct usb_gadget *gadget) +{ + struct gmidi_device *dev = get_gadget_data(gadget); + struct snd_card* card; + + DBG(dev, "unbind\n"); + + card = dev->card; + dev->card = NULL; + if (card) { + snd_card_free(card); + } + + /* we've already been disconnected ... no i/o is active */ + if (dev->req) { + dev->req->length = USB_BUFSIZ; + free_ep_req(gadget->ep0, dev->req); + } + kfree(dev); + set_gadget_data(gadget, NULL); +} + +static int gmidi_snd_free(struct snd_device *device) +{ + return 0; +} + +static void gmidi_transmit_packet(struct usb_request* req, uint8_t p0, + uint8_t p1, uint8_t p2, uint8_t p3) +{ + unsigned length = req->length; + + uint8_t* buf = (uint8_t*)req->buf + length; + buf[0] = p0; + buf[1] = p1; + buf[2] = p2; + buf[3] = p3; + req->length = length + 4; +} + +/* + * Converts MIDI commands to USB MIDI packets. + */ +static void gmidi_transmit_byte(struct usb_request* req, + struct gmidi_in_port* port, uint8_t b) +{ + uint8_t p0 = port->cable; + + if (b >= 0xf8) { + gmidi_transmit_packet(req, p0 | 0x0f, b, 0, 0); + } else if (b >= 0xf0) { + switch (b) { + case 0xf0: + port->data[0] = b; + port->state = STATE_SYSEX_1; + break; + case 0xf1: + case 0xf3: + port->data[0] = b; + port->state = STATE_1PARAM; + break; + case 0xf2: + port->data[0] = b; + port->state = STATE_2PARAM_1; + break; + case 0xf4: + case 0xf5: + port->state = STATE_UNKNOWN; + break; + case 0xf6: + gmidi_transmit_packet(req, p0 | 0x05, 0xf6, 0, 0); + port->state = STATE_UNKNOWN; + break; + case 0xf7: + switch (port->state) { + case STATE_SYSEX_0: + gmidi_transmit_packet(req, + p0 | 0x05, 0xf7, 0, 0); + break; + case STATE_SYSEX_1: + gmidi_transmit_packet(req, + p0 | 0x06, port->data[0], 0xf7, 0); + break; + case STATE_SYSEX_2: + gmidi_transmit_packet(req, + p0 | 0x07, port->data[0], + port->data[1], 0xf7); + break; + } + port->state = STATE_UNKNOWN; + break; + } + } else if (b >= 0x80) { + port->data[0] = b; + if (b >= 0xc0 && b <= 0xdf) + port->state = STATE_1PARAM; + else + port->state = STATE_2PARAM_1; + } else { /* b < 0x80 */ + switch (port->state) { + case STATE_1PARAM: + if (port->data[0] < 0xf0) { + p0 |= port->data[0] >> 4; + } else { + p0 |= 0x02; + port->state = STATE_UNKNOWN; + } + gmidi_transmit_packet(req, p0, port->data[0], b, 0); + break; + case STATE_2PARAM_1: + port->data[1] = b; + port->state = STATE_2PARAM_2; + break; + case STATE_2PARAM_2: + if (port->data[0] < 0xf0) { + p0 |= port->data[0] >> 4; + port->state = STATE_2PARAM_1; + } else { + p0 |= 0x03; + port->state = STATE_UNKNOWN; + } + gmidi_transmit_packet(req, + p0, port->data[0], port->data[1], b); + break; + case STATE_SYSEX_0: + port->data[0] = b; + port->state = STATE_SYSEX_1; + break; + case STATE_SYSEX_1: + port->data[1] = b; + port->state = STATE_SYSEX_2; + break; + case STATE_SYSEX_2: + gmidi_transmit_packet(req, + p0 | 0x04, port->data[0], port->data[1], b); + port->state = STATE_SYSEX_0; + break; + } + } +} + +static void gmidi_transmit(struct gmidi_device* dev, struct usb_request* req) +{ + struct usb_ep* ep = dev->in_ep; + struct gmidi_in_port* port = &dev->in_port; + + if (!ep) { + return; + } + if (!req) { + req = alloc_ep_req(ep, buflen); + } + if (!req) { + ERROR(dev, "gmidi_transmit: alloc_ep_request failed\n"); + return; + } + req->length = 0; + req->complete = gmidi_complete; + + if (port->active) { + while (req->length + 3 < buflen) { + uint8_t b; + if (snd_rawmidi_transmit(dev->in_substream, &b, 1) + != 1) + { + port->active = 0; + break; + } + gmidi_transmit_byte(req, port, b); + } + } + if (req->length > 0) { + usb_ep_queue(ep, req, GFP_ATOMIC); + } else { + free_ep_req(ep, req); + } +} + +static void gmidi_in_tasklet(unsigned long data) +{ + struct gmidi_device* dev = (struct gmidi_device*)data; + + gmidi_transmit(dev, NULL); +} + +static int gmidi_in_open(struct snd_rawmidi_substream *substream) +{ + struct gmidi_device* dev = substream->rmidi->private_data; + + VDBG(dev, "gmidi_in_open\n"); + dev->in_substream = substream; + dev->in_port.state = STATE_UNKNOWN; + return 0; +} + +static int gmidi_in_close(struct snd_rawmidi_substream *substream) +{ + VDBG(dev, "gmidi_in_close\n"); + return 0; +} + +static void gmidi_in_trigger(struct snd_rawmidi_substream *substream, int up) +{ + struct gmidi_device* dev = substream->rmidi->private_data; + + VDBG(dev, "gmidi_in_trigger %d\n", up); + dev->in_port.active = up; + if (up) { + tasklet_hi_schedule(&dev->tasklet); + } +} + +static int gmidi_out_open(struct snd_rawmidi_substream *substream) +{ + struct gmidi_device* dev = substream->rmidi->private_data; + + VDBG(dev, "gmidi_out_open\n"); + dev->out_substream = substream; + return 0; +} + +static int gmidi_out_close(struct snd_rawmidi_substream *substream) +{ + VDBG(dev, "gmidi_out_close\n"); + return 0; +} + +static void gmidi_out_trigger(struct snd_rawmidi_substream *substream, int up) +{ + struct gmidi_device* dev = substream->rmidi->private_data; + + VDBG(dev, "gmidi_out_trigger %d\n", up); + if (up) { + set_bit(substream->number, &dev->out_triggered); + } else { + clear_bit(substream->number, &dev->out_triggered); + } +} + +static struct snd_rawmidi_ops gmidi_in_ops = { + .open = gmidi_in_open, + .close = gmidi_in_close, + .trigger = gmidi_in_trigger, +}; + +static struct snd_rawmidi_ops gmidi_out_ops = { + .open = gmidi_out_open, + .close = gmidi_out_close, + .trigger = gmidi_out_trigger +}; + +/* register as a sound "card" */ +static int gmidi_register_card(struct gmidi_device *dev) +{ + struct snd_card *card; + struct snd_rawmidi *rmidi; + int err; + int out_ports = 1; + int in_ports = 1; + static struct snd_device_ops ops = { + .dev_free = gmidi_snd_free, + }; + + card = snd_card_new(index, id, THIS_MODULE, 0); + if (!card) { + ERROR(dev, "snd_card_new failed\n"); + err = -ENOMEM; + goto fail; + } + dev->card = card; + + err = snd_device_new(card, SNDRV_DEV_LOWLEVEL, dev, &ops); + if (err < 0) { + ERROR(dev, "snd_device_new failed: error %d\n", err); + goto fail; + } + + strcpy(card->driver, longname); + strcpy(card->longname, longname); + strcpy(card->shortname, shortname); + + /* Set up rawmidi */ + dev->in_port.dev = dev; + dev->in_port.active = 0; + snd_component_add(card, "MIDI"); + err = snd_rawmidi_new(card, "USB MIDI Gadget", 0, + out_ports, in_ports, &rmidi); + if (err < 0) { + ERROR(dev, "snd_rawmidi_new failed: error %d\n", err); + goto fail; + } + dev->rmidi = rmidi; + strcpy(rmidi->name, card->shortname); + rmidi->info_flags = SNDRV_RAWMIDI_INFO_OUTPUT | + SNDRV_RAWMIDI_INFO_INPUT | + SNDRV_RAWMIDI_INFO_DUPLEX; + rmidi->private_data = dev; + + /* Yes, rawmidi OUTPUT = USB IN, and rawmidi INPUT = USB OUT. + It's an upside-down world being a gadget. */ + snd_rawmidi_set_ops(rmidi, SNDRV_RAWMIDI_STREAM_OUTPUT, &gmidi_in_ops); + snd_rawmidi_set_ops(rmidi, SNDRV_RAWMIDI_STREAM_INPUT, &gmidi_out_ops); + + snd_card_set_dev(card, &dev->gadget->dev); + + /* register it - we're ready to go */ + err = snd_card_register(card); + if (err < 0) { + ERROR(dev, "snd_card_register failed\n"); + goto fail; + } + + VDBG(dev, "gmidi_register_card finished ok\n"); + return 0; + +fail: + if (dev->card) { + snd_card_free(dev->card); + dev->card = NULL; + } + return err; +} + +/* + * Creates an output endpoint, and initializes output ports. + */ +static int __devinit gmidi_bind(struct usb_gadget *gadget) +{ + struct gmidi_device *dev; + struct usb_ep *in_ep, *out_ep; + int gcnum, err = 0; + + /* support optional vendor/distro customization */ + if (idVendor) { + if (!idProduct) { + printk(KERN_ERR "idVendor needs idProduct!\n"); + return -ENODEV; + } + device_desc.idVendor = cpu_to_le16(idVendor); + device_desc.idProduct = cpu_to_le16(idProduct); + if (bcdDevice) { + device_desc.bcdDevice = cpu_to_le16(bcdDevice); + } + } + if (iManufacturer) { + strlcpy(manufacturer, iManufacturer, sizeof(manufacturer)); + } else { + snprintf(manufacturer, sizeof(manufacturer), "%s %s with %s", + system_utsname.sysname, system_utsname.release, + gadget->name); + } + if (iProduct) { + strlcpy(product_desc, iProduct, sizeof(product_desc)); + } + if (iSerialNumber) { + device_desc.iSerialNumber = STRING_SERIAL, + strlcpy(serial_number, iSerialNumber, sizeof(serial_number)); + } + + /* Bulk-only drivers like this one SHOULD be able to + * autoconfigure on any sane usb controller driver, + * but there may also be important quirks to address. + */ + usb_ep_autoconfig_reset(gadget); + in_ep = usb_ep_autoconfig(gadget, &bulk_in_desc); + if (!in_ep) { +autoconf_fail: + printk(KERN_ERR "%s: can't autoconfigure on %s\n", + shortname, gadget->name); + return -ENODEV; + } + EP_IN_NAME = in_ep->name; + in_ep->driver_data = in_ep; /* claim */ + + out_ep = usb_ep_autoconfig(gadget, &bulk_out_desc); + if (!out_ep) { + goto autoconf_fail; + } + EP_OUT_NAME = out_ep->name; + out_ep->driver_data = out_ep; /* claim */ + + gcnum = usb_gadget_controller_number(gadget); + if (gcnum >= 0) { + device_desc.bcdDevice = cpu_to_le16(0x0200 + gcnum); + } else { + /* gmidi is so simple (no altsettings) that + * it SHOULD NOT have problems with bulk-capable hardware. + * so warn about unrecognized controllers, don't panic. + */ + printk(KERN_WARNING "%s: controller '%s' not recognized\n", + shortname, gadget->name); + device_desc.bcdDevice = __constant_cpu_to_le16(0x9999); + } + + + /* ok, we made sense of the hardware ... */ + dev = kzalloc(sizeof(*dev), SLAB_KERNEL); + if (!dev) { + return -ENOMEM; + } + spin_lock_init(&dev->lock); + dev->gadget = gadget; + dev->in_ep = in_ep; + dev->out_ep = out_ep; + set_gadget_data(gadget, dev); + tasklet_init(&dev->tasklet, gmidi_in_tasklet, (unsigned long)dev); + + /* preallocate control response and buffer */ + dev->req = usb_ep_alloc_request(gadget->ep0, GFP_KERNEL); + if (!dev->req) { + err = -ENOMEM; + goto fail; + } + dev->req->buf = usb_ep_alloc_buffer(gadget->ep0, USB_BUFSIZ, + &dev->req->dma, GFP_KERNEL); + if (!dev->req->buf) { + err = -ENOMEM; + goto fail; + } + + dev->req->complete = gmidi_setup_complete; + + device_desc.bMaxPacketSize0 = gadget->ep0->maxpacket; + + gadget->ep0->driver_data = dev; + + INFO(dev, "%s, version: " DRIVER_VERSION "\n", longname); + INFO(dev, "using %s, OUT %s IN %s\n", gadget->name, + EP_OUT_NAME, EP_IN_NAME); + + /* register as an ALSA sound card */ + err = gmidi_register_card(dev); + if (err < 0) { + goto fail; + } + + VDBG(dev, "gmidi_bind finished ok\n"); + return 0; + +fail: + gmidi_unbind(gadget); + return err; +} + + +static void gmidi_suspend(struct usb_gadget *gadget) +{ + struct gmidi_device *dev = get_gadget_data(gadget); + + if (gadget->speed == USB_SPEED_UNKNOWN) { + return; + } + + DBG(dev, "suspend\n"); +} + +static void gmidi_resume(struct usb_gadget *gadget) +{ + struct gmidi_device *dev = get_gadget_data(gadget); + + DBG(dev, "resume\n"); +} + + +static struct usb_gadget_driver gmidi_driver = { + .speed = USB_SPEED_FULL, + .function = (char *)longname, + .bind = gmidi_bind, + .unbind = __exit_p(gmidi_unbind), + + .setup = gmidi_setup, + .disconnect = gmidi_disconnect, + + .suspend = gmidi_suspend, + .resume = gmidi_resume, + + .driver = { + .name = (char *)shortname, + .owner = THIS_MODULE, + }, +}; + +static int __init gmidi_init(void) +{ + return usb_gadget_register_driver(&gmidi_driver); +} +module_init(gmidi_init); + +static void __exit gmidi_cleanup(void) +{ + usb_gadget_unregister_driver(&gmidi_driver); +} +module_exit(gmidi_cleanup); + diff --git a/drivers/usb/gadget/inode.c b/drivers/usb/gadget/inode.c index 3bdc5e3ba23..4655522a08d 100644 --- a/drivers/usb/gadget/inode.c +++ b/drivers/usb/gadget/inode.c @@ -32,6 +32,7 @@ #include <linux/compiler.h> #include <asm/uaccess.h> #include <linux/slab.h> +#include <linux/poll.h> #include <linux/device.h> #include <linux/moduleparam.h> @@ -222,7 +223,6 @@ static void put_ep (struct ep_data *data) /* needs no more cleanup */ BUG_ON (!list_empty (&data->epfiles)); BUG_ON (waitqueue_active (&data->wait)); - BUG_ON (down_trylock (&data->lock) != 0); kfree (data); } @@ -477,6 +477,10 @@ static int ep_release (struct inode *inode, struct file *fd) { struct ep_data *data = fd->private_data; + int value; + + if ((value = down_interruptible(&data->lock)) < 0) + return value; /* clean up if this can be reopened */ if (data->state != STATE_EP_UNBOUND) { @@ -485,6 +489,7 @@ ep_release (struct inode *inode, struct file *fd) data->hs_desc.bDescriptorType = 0; usb_ep_disable(data->ep); } + up (&data->lock); put_ep (data); return 0; } @@ -709,7 +714,7 @@ ep_aio_write(struct kiocb *iocb, const char __user *ubuf, size_t len, loff_t o) /*----------------------------------------------------------------------*/ /* used after endpoint configuration */ -static struct file_operations ep_io_operations = { +static const struct file_operations ep_io_operations = { .owner = THIS_MODULE, .llseek = no_llseek, @@ -741,7 +746,7 @@ ep_config (struct file *fd, const char __user *buf, size_t len, loff_t *ptr) struct ep_data *data = fd->private_data; struct usb_ep *ep; u32 tag; - int value; + int value, length = len; if ((value = down_interruptible (&data->lock)) < 0) return value; @@ -792,7 +797,6 @@ ep_config (struct file *fd, const char __user *buf, size_t len, loff_t *ptr) goto fail0; } } - value = len; spin_lock_irq (&data->dev->lock); if (data->dev->state == STATE_DEV_UNBOUND) { @@ -822,8 +826,10 @@ ep_config (struct file *fd, const char __user *buf, size_t len, loff_t *ptr) data->name); data->state = STATE_EP_DEFER_ENABLE; } - if (value == 0) + if (value == 0) { fd->f_op = &ep_io_operations; + value = length; + } gone: spin_unlock_irq (&data->dev->lock); if (value < 0) { @@ -844,7 +850,7 @@ fail1: static int ep_open (struct inode *inode, struct file *fd) { - struct ep_data *data = inode->u.generic_ip; + struct ep_data *data = inode->i_private; int value = -EBUSY; if (down_interruptible (&data->lock) != 0) @@ -867,7 +873,7 @@ ep_open (struct inode *inode, struct file *fd) } /* used before endpoint configuration */ -static struct file_operations ep_config_operations = { +static const struct file_operations ep_config_operations = { .owner = THIS_MODULE, .llseek = no_llseek, @@ -1009,7 +1015,7 @@ ep0_read (struct file *fd, char __user *buf, size_t len, loff_t *ptr) else { len = min (len, (size_t)dev->req->actual); // FIXME don't call this with the spinlock held ... - if (copy_to_user (buf, &dev->req->buf, len)) + if (copy_to_user (buf, dev->req->buf, len)) retval = -EFAULT; clean_req (dev->gadget->ep0, dev->req); /* NOTE userspace can't yet choose to stall */ @@ -1229,6 +1235,35 @@ dev_release (struct inode *inode, struct file *fd) return 0; } +static unsigned int +ep0_poll (struct file *fd, poll_table *wait) +{ + struct dev_data *dev = fd->private_data; + int mask = 0; + + poll_wait(fd, &dev->wait, wait); + + spin_lock_irq (&dev->lock); + + /* report fd mode change before acting on it */ + if (dev->setup_abort) { + dev->setup_abort = 0; + mask = POLLHUP; + goto out; + } + + if (dev->state == STATE_SETUP) { + if (dev->setup_in || dev->setup_can_stall) + mask = POLLOUT; + } else { + if (dev->ev_next != 0) + mask = POLLIN; + } +out: + spin_unlock_irq(&dev->lock); + return mask; +} + static int dev_ioctl (struct inode *inode, struct file *fd, unsigned code, unsigned long value) { @@ -1241,14 +1276,14 @@ static int dev_ioctl (struct inode *inode, struct file *fd, } /* used after device configuration */ -static struct file_operations ep0_io_operations = { +static const struct file_operations ep0_io_operations = { .owner = THIS_MODULE, .llseek = no_llseek, .read = ep0_read, .write = ep0_write, .fasync = ep0_fasync, - // .poll = ep0_poll, + .poll = ep0_poll, .ioctl = dev_ioctl, .release = dev_release, }; @@ -1696,16 +1731,17 @@ gadgetfs_disconnect (struct usb_gadget *gadget) { struct dev_data *dev = get_gadget_data (gadget); + spin_lock (&dev->lock); if (dev->state == STATE_UNCONNECTED) { DBG (dev, "already unconnected\n"); - return; + goto exit; } dev->state = STATE_UNCONNECTED; INFO (dev, "disconnected\n"); - spin_lock (&dev->lock); next_event (dev, GADGETFS_DISCONNECT); ep0_readable (dev); +exit: spin_unlock (&dev->lock); } @@ -1909,7 +1945,7 @@ fail: static int dev_open (struct inode *inode, struct file *fd) { - struct dev_data *dev = inode->u.generic_ip; + struct dev_data *dev = inode->i_private; int value = -EBUSY; if (dev->state == STATE_DEV_DISABLED) { @@ -1922,7 +1958,7 @@ dev_open (struct inode *inode, struct file *fd) return value; } -static struct file_operations dev_init_operations = { +static const struct file_operations dev_init_operations = { .owner = THIS_MODULE, .llseek = no_llseek, @@ -1966,11 +2002,10 @@ gadgetfs_make_inode (struct super_block *sb, inode->i_mode = mode; inode->i_uid = default_uid; inode->i_gid = default_gid; - inode->i_blksize = PAGE_CACHE_SIZE; inode->i_blocks = 0; inode->i_atime = inode->i_mtime = inode->i_ctime = CURRENT_TIME; - inode->u.generic_ip = data; + inode->i_private = data; inode->i_fop = fops; } return inode; diff --git a/drivers/usb/gadget/net2280.c b/drivers/usb/gadget/net2280.c index 09243239d94..3bda37f9a35 100644 --- a/drivers/usb/gadget/net2280.c +++ b/drivers/usb/gadget/net2280.c @@ -2,7 +2,7 @@ * Driver for the PLX NET2280 USB device controller. * Specs and errata are available from <http://www.plxtech.com>. * - * PLX Technology Inc. (formerly NetChip Technology) supported the + * PLX Technology Inc. (formerly NetChip Technology) supported the * development of this driver. * * @@ -26,7 +26,8 @@ * Copyright (C) 2003 David Brownell * Copyright (C) 2003-2005 PLX Technology, Inc. * - * Modified Seth Levy 2005 PLX Technology, Inc. to provide compatibility with 2282 chip + * Modified Seth Levy 2005 PLX Technology, Inc. to provide compatibility + * with 2282 chip * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by @@ -85,7 +86,7 @@ static const char driver_name [] = "net2280"; static const char driver_desc [] = DRIVER_DESC; static const char ep0name [] = "ep0"; -static const char *ep_name [] = { +static const char *const ep_name [] = { ep0name, "ep-a", "ep-b", "ep-c", "ep-d", "ep-e", "ep-f", @@ -225,7 +226,9 @@ net2280_enable (struct usb_ep *_ep, const struct usb_endpoint_descriptor *desc) if (!ep->is_in) writel ((1 << SET_NAK_OUT_PACKETS), &ep->regs->ep_rsp); else if (dev->pdev->device != 0x2280) { - /* Added for 2282, Don't use nak packets on an in endpoint, this was ignored on 2280 */ + /* Added for 2282, Don't use nak packets on an in endpoint, + * this was ignored on 2280 + */ writel ((1 << CLEAR_NAK_OUT_PACKETS) | (1 << CLEAR_NAK_OUT_PACKETS_MODE), &ep->regs->ep_rsp); } @@ -288,7 +291,7 @@ static int handshake (u32 __iomem *ptr, u32 mask, u32 done, int usec) return -ETIMEDOUT; } -static struct usb_ep_ops net2280_ep_ops; +static const struct usb_ep_ops net2280_ep_ops; static void ep_reset (struct net2280_regs __iomem *regs, struct net2280_ep *ep) { @@ -449,34 +452,15 @@ net2280_free_request (struct usb_ep *_ep, struct usb_request *_req) /*-------------------------------------------------------------------------*/ -#undef USE_KMALLOC - -/* many common platforms have dma-coherent caches, which means that it's - * safe to use kmalloc() memory for all i/o buffers without using any - * cache flushing calls. (unless you're trying to share cache lines - * between dma and non-dma activities, which is a slow idea in any case.) +/* + * dma-coherent memory allocation (for dma-capable endpoints) * - * other platforms need more care, with 2.5 having a moderately general - * solution (which falls down for allocations smaller than one page) - * that improves significantly on the 2.4 PCI allocators by removing - * the restriction that memory never be freed in_interrupt(). + * NOTE: the dma_*_coherent() API calls suck. Most implementations are + * (a) page-oriented, so small buffers lose big; and (b) asymmetric with + * respect to calls with irqs disabled: alloc is safe, free is not. + * We currently work around (b), but not (a). */ -#if defined(CONFIG_X86) -#define USE_KMALLOC - -#elif defined(CONFIG_PPC) && !defined(CONFIG_NOT_COHERENT_CACHE) -#define USE_KMALLOC -#elif defined(CONFIG_MIPS) && !defined(CONFIG_DMA_NONCOHERENT) -#define USE_KMALLOC - -/* FIXME there are other cases, including an x86-64 one ... */ -#endif - -/* allocating buffers this way eliminates dma mapping overhead, which - * on some platforms will mean eliminating a per-io buffer copy. with - * some kinds of system caches, further tweaks may still be needed. - */ static void * net2280_alloc_buffer ( struct usb_ep *_ep, @@ -493,43 +477,71 @@ net2280_alloc_buffer ( return NULL; *dma = DMA_ADDR_INVALID; -#if defined(USE_KMALLOC) - retval = kmalloc(bytes, gfp_flags); - if (retval) - *dma = virt_to_phys(retval); -#else - if (ep->dma) { - /* the main problem with this call is that it wastes memory - * on typical 1/N page allocations: it allocates 1-N pages. - */ -#warning Using dma_alloc_coherent even with buffers smaller than a page. + if (ep->dma) retval = dma_alloc_coherent(&ep->dev->pdev->dev, bytes, dma, gfp_flags); - } else + else retval = kmalloc(bytes, gfp_flags); -#endif return retval; } +static DEFINE_SPINLOCK(buflock); +static LIST_HEAD(buffers); + +struct free_record { + struct list_head list; + struct device *dev; + unsigned bytes; + dma_addr_t dma; +}; + +static void do_free(unsigned long ignored) +{ + spin_lock_irq(&buflock); + while (!list_empty(&buffers)) { + struct free_record *buf; + + buf = list_entry(buffers.next, struct free_record, list); + list_del(&buf->list); + spin_unlock_irq(&buflock); + + dma_free_coherent(buf->dev, buf->bytes, buf, buf->dma); + + spin_lock_irq(&buflock); + } + spin_unlock_irq(&buflock); +} + +static DECLARE_TASKLET(deferred_free, do_free, 0); + static void net2280_free_buffer ( struct usb_ep *_ep, - void *buf, + void *address, dma_addr_t dma, unsigned bytes ) { /* free memory into the right allocator */ -#ifndef USE_KMALLOC if (dma != DMA_ADDR_INVALID) { struct net2280_ep *ep; + struct free_record *buf = address; + unsigned long flags; ep = container_of(_ep, struct net2280_ep, ep); if (!_ep) return; - dma_free_coherent(&ep->dev->pdev->dev, bytes, buf, dma); + + ep = container_of (_ep, struct net2280_ep, ep); + buf->dev = &ep->dev->pdev->dev; + buf->bytes = bytes; + buf->dma = dma; + + spin_lock_irqsave(&buflock, flags); + list_add_tail(&buf->list, &buffers); + tasklet_schedule(&deferred_free); + spin_unlock_irqrestore(&buflock, flags); } else -#endif - kfree (buf); + kfree (address); } /*-------------------------------------------------------------------------*/ @@ -737,7 +749,8 @@ fill_dma_desc (struct net2280_ep *ep, struct net2280_request *req, int valid) */ if (ep->is_in) dmacount |= (1 << DMA_DIRECTION); - if ((!ep->is_in && (dmacount % ep->ep.maxpacket) != 0) || ep->dev->pdev->device != 0x2280) + if ((!ep->is_in && (dmacount % ep->ep.maxpacket) != 0) + || ep->dev->pdev->device != 0x2280) dmacount |= (1 << END_OF_CHAIN); req->valid = valid; @@ -812,7 +825,7 @@ static void start_dma (struct net2280_ep *ep, struct net2280_request *req) /* previous OUT packet might have been short */ if (!ep->is_in && ((tmp = readl (&ep->regs->ep_stat)) - & (1 << NAK_OUT_PACKETS)) != 0) { + & (1 << NAK_OUT_PACKETS)) != 0) { writel ((1 << SHORT_PACKET_TRANSFERRED_INTERRUPT), &ep->regs->ep_stat); @@ -1373,7 +1386,7 @@ net2280_fifo_flush (struct usb_ep *_ep) (void) readl (&ep->regs->ep_rsp); } -static struct usb_ep_ops net2280_ep_ops = { +static const struct usb_ep_ops net2280_ep_ops = { .enable = net2280_enable, .disable = net2280_disable, @@ -1631,7 +1644,7 @@ show_registers (struct device *_dev, struct device_attribute *attr, char *buf) } /* Indexed Registers */ - // none yet + // none yet /* Statistics */ t = scnprintf (next, size, "\nirqs: "); @@ -1691,11 +1704,11 @@ show_queues (struct device *_dev, struct device_attribute *attr, char *buf) ({ char *val; switch (d->bmAttributes & 0x03) { case USB_ENDPOINT_XFER_BULK: - val = "bulk"; break; + val = "bulk"; break; case USB_ENDPOINT_XFER_INT: - val = "intr"; break; + val = "intr"; break; default: - val = "iso"; break; + val = "iso"; break; }; val; }), le16_to_cpu (d->wMaxPacketSize) & 0x1fff, ep->dma ? "dma" : "pio", ep->fifo_size @@ -1808,8 +1821,8 @@ extern int net2280_set_fifo_mode (struct usb_gadget *gadget, int mode); * net2280_set_fifo_mode - change allocation of fifo buffers * @gadget: access to the net2280 device that will be updated * @mode: 0 for default, four 1kB buffers (ep-a through ep-d); - * 1 for two 2kB buffers (ep-a and ep-b only); - * 2 for one 2kB buffer (ep-a) and two 1kB ones (ep-b, ep-c). + * 1 for two 2kB buffers (ep-a and ep-b only); + * 2 for one 2kB buffer (ep-a) and two 1kB ones (ep-b, ep-c). * * returns zero on success, else negative errno. when this succeeds, * the contents of gadget->ep_list may have changed. @@ -2241,7 +2254,8 @@ static void handle_ep_small (struct net2280_ep *ep) req->td->dmacount = 0; t = readl (&ep->regs->ep_avail); dma_done (ep, req, count, - (ep->out_overflow || t) ? -EOVERFLOW : 0); + (ep->out_overflow || t) + ? -EOVERFLOW : 0); } /* also flush to prevent erratum 0106 trouble */ @@ -2411,7 +2425,7 @@ static void handle_stat0_irqs (struct net2280 *dev, u32 stat) , &ep->regs->ep_stat); u.raw [0] = readl (&dev->usb->setup0123); u.raw [1] = readl (&dev->usb->setup4567); - + cpu_to_le32s (&u.raw [0]); cpu_to_le32s (&u.raw [1]); @@ -2578,14 +2592,16 @@ static void handle_stat1_irqs (struct net2280 *dev, u32 stat) /* VBUS disconnect is indicated by VBUS_PIN and VBUS_INTERRUPT set. * Root Port Reset is indicated by ROOT_PORT_RESET_INTERRRUPT set and - * both HIGH_SPEED and FULL_SPEED clear (as ROOT_PORT_RESET_INTERRUPT + * both HIGH_SPEED and FULL_SPEED clear (as ROOT_PORT_RESET_INTERRUPT * only indicates a change in the reset state). */ if (stat & tmp) { writel (tmp, &dev->regs->irqstat1); - if ((((stat & (1 << ROOT_PORT_RESET_INTERRUPT)) && - ((readl (&dev->usb->usbstat) & mask) == 0)) - || ((readl (&dev->usb->usbctl) & (1 << VBUS_PIN)) == 0) + if ((((stat & (1 << ROOT_PORT_RESET_INTERRUPT)) + && ((readl (&dev->usb->usbstat) & mask) + == 0)) + || ((readl (&dev->usb->usbctl) + & (1 << VBUS_PIN)) == 0) ) && ( dev->gadget.speed != USB_SPEED_UNKNOWN)) { DEBUG (dev, "disconnect %s\n", dev->driver->driver.name); @@ -2852,7 +2868,7 @@ static int net2280_probe (struct pci_dev *pdev, const struct pci_device_id *id) /* now all the pci goodies ... */ if (pci_enable_device (pdev) < 0) { - retval = -ENODEV; + retval = -ENODEV; goto done; } dev->enabled = 1; @@ -2870,6 +2886,10 @@ static int net2280_probe (struct pci_dev *pdev, const struct pci_device_id *id) } dev->region = 1; + /* FIXME provide firmware download interface to put + * 8051 code into the chip, e.g. to turn on PCI PM. + */ + base = ioremap_nocache (resource, len); if (base == NULL) { DEBUG (dev, "can't map memory\n"); @@ -2984,16 +3004,16 @@ static void net2280_shutdown (struct pci_dev *pdev) /*-------------------------------------------------------------------------*/ -static struct pci_device_id pci_ids [] = { { - .class = ((PCI_CLASS_SERIAL_USB << 8) | 0xfe), - .class_mask = ~0, +static const struct pci_device_id pci_ids [] = { { + .class = ((PCI_CLASS_SERIAL_USB << 8) | 0xfe), + .class_mask = ~0, .vendor = 0x17cc, .device = 0x2280, .subvendor = PCI_ANY_ID, .subdevice = PCI_ANY_ID, }, { - .class = ((PCI_CLASS_SERIAL_USB << 8) | 0xfe), - .class_mask = ~0, + .class = ((PCI_CLASS_SERIAL_USB << 8) | 0xfe), + .class_mask = ~0, .vendor = 0x17cc, .device = 0x2282, .subvendor = PCI_ANY_ID, diff --git a/drivers/usb/gadget/omap_udc.c b/drivers/usb/gadget/omap_udc.c index 2de9748ee67..0a64504c254 100644 --- a/drivers/usb/gadget/omap_udc.c +++ b/drivers/usb/gadget/omap_udc.c @@ -40,7 +40,7 @@ #include <linux/platform_device.h> #include <linux/usb_ch9.h> #include <linux/usb_gadget.h> -#include <linux/usb_otg.h> +#include <linux/usb/otg.h> #include <linux/dma-mapping.h> #include <asm/byteorder.h> @@ -2437,7 +2437,7 @@ static int proc_udc_open(struct inode *inode, struct file *file) return single_open(file, proc_udc_show, NULL); } -static struct file_operations proc_ops = { +static const struct file_operations proc_ops = { .open = proc_udc_open, .read = seq_read, .llseek = seq_lseek, diff --git a/drivers/usb/gadget/pxa2xx_udc.c b/drivers/usb/gadget/pxa2xx_udc.c index fff027d30a0..f1adcf8b202 100644 --- a/drivers/usb/gadget/pxa2xx_udc.c +++ b/drivers/usb/gadget/pxa2xx_udc.c @@ -150,6 +150,39 @@ MODULE_PARM_DESC (fifo_mode, "pxa2xx udc fifo mode"); static void pxa2xx_ep_fifo_flush (struct usb_ep *ep); static void nuke (struct pxa2xx_ep *, int status); +/* one GPIO should be used to detect VBUS from the host */ +static int is_vbus_present(void) +{ + struct pxa2xx_udc_mach_info *mach = the_controller->mach; + + if (mach->gpio_vbus) + return pxa_gpio_get(mach->gpio_vbus); + if (mach->udc_is_connected) + return mach->udc_is_connected(); + return 1; +} + +/* one GPIO should control a D+ pullup, so host sees this device (or not) */ +static void pullup_off(void) +{ + struct pxa2xx_udc_mach_info *mach = the_controller->mach; + + if (mach->gpio_pullup) + pxa_gpio_set(mach->gpio_pullup, 0); + else if (mach->udc_command) + mach->udc_command(PXA2XX_UDC_CMD_DISCONNECT); +} + +static void pullup_on(void) +{ + struct pxa2xx_udc_mach_info *mach = the_controller->mach; + + if (mach->gpio_pullup) + pxa_gpio_set(mach->gpio_pullup, 1); + else if (mach->udc_command) + mach->udc_command(PXA2XX_UDC_CMD_CONNECT); +} + static void pio_irq_enable(int bEndpointAddress) { bEndpointAddress &= 0xf; @@ -1721,6 +1754,16 @@ lubbock_vbus_irq(int irq, void *_dev, struct pt_regs *r) #endif +static irqreturn_t +udc_vbus_irq(int irq, void *_dev, struct pt_regs *r) +{ + struct pxa2xx_udc *dev = _dev; + int vbus = pxa_gpio_get(dev->mach->gpio_vbus); + + pxa2xx_udc_vbus_session(&dev->gadget, vbus); + return IRQ_HANDLED; +} + /*-------------------------------------------------------------------------*/ @@ -2438,7 +2481,7 @@ static struct pxa2xx_udc memory = { static int __init pxa2xx_udc_probe(struct platform_device *pdev) { struct pxa2xx_udc *dev = &memory; - int retval, out_dma = 1; + int retval, out_dma = 1, vbus_irq; u32 chiprev; /* insist on Intel/ARM/XScale */ @@ -2502,6 +2545,16 @@ static int __init pxa2xx_udc_probe(struct platform_device *pdev) /* other non-static parts of init */ dev->dev = &pdev->dev; dev->mach = pdev->dev.platform_data; + if (dev->mach->gpio_vbus) { + vbus_irq = IRQ_GPIO(dev->mach->gpio_vbus & GPIO_MD_MASK_NR); + pxa_gpio_mode((dev->mach->gpio_vbus & GPIO_MD_MASK_NR) + | GPIO_IN); + set_irq_type(vbus_irq, IRQT_BOTHEDGE); + } else + vbus_irq = 0; + if (dev->mach->gpio_pullup) + pxa_gpio_mode((dev->mach->gpio_pullup & GPIO_MD_MASK_NR) + | GPIO_OUT | GPIO_DFLT_LOW); init_timer(&dev->timer); dev->timer.function = udc_watchdog; @@ -2557,8 +2610,19 @@ lubbock_fail0: HEX_DISPLAY(dev->stats.irqs); LUB_DISC_BLNK_LED &= 0xff; #endif - } + } else #endif + if (vbus_irq) { + retval = request_irq(vbus_irq, udc_vbus_irq, + SA_INTERRUPT | SA_SAMPLE_RANDOM, + driver_name, dev); + if (retval != 0) { + printk(KERN_ERR "%s: can't get irq %i, err %d\n", + driver_name, vbus_irq, retval); + free_irq(IRQ_USB, dev); + return -EBUSY; + } + } create_proc_files(); return 0; @@ -2587,6 +2651,8 @@ static int __exit pxa2xx_udc_remove(struct platform_device *pdev) free_irq(LUBBOCK_USB_IRQ, dev); } #endif + if (dev->mach->gpio_vbus) + free_irq(IRQ_GPIO(dev->mach->gpio_vbus), dev); platform_set_drvdata(pdev, NULL); the_controller = NULL; return 0; diff --git a/drivers/usb/gadget/pxa2xx_udc.h b/drivers/usb/gadget/pxa2xx_udc.h index 19a883f7d1b..8e598c8bf4e 100644 --- a/drivers/usb/gadget/pxa2xx_udc.h +++ b/drivers/usb/gadget/pxa2xx_udc.h @@ -177,27 +177,19 @@ struct pxa2xx_udc { static struct pxa2xx_udc *the_controller; -/* one GPIO should be used to detect VBUS from the host */ -static inline int is_vbus_present(void) +static inline int pxa_gpio_get(unsigned gpio) { - if (!the_controller->mach->udc_is_connected) - return 1; - return the_controller->mach->udc_is_connected(); + return (GPLR(gpio) & GPIO_bit(gpio)) != 0; } -/* one GPIO should control a D+ pullup, so host sees this device (or not) */ -static inline void pullup_off(void) +static inline void pxa_gpio_set(unsigned gpio, int is_on) { - if (!the_controller->mach->udc_command) - return; - the_controller->mach->udc_command(PXA2XX_UDC_CMD_DISCONNECT); -} + int mask = GPIO_bit(gpio); -static inline void pullup_on(void) -{ - if (!the_controller->mach->udc_command) - return; - the_controller->mach->udc_command(PXA2XX_UDC_CMD_CONNECT); + if (is_on) + GPSR(gpio) = mask; + else + GPCR(gpio) = mask; } /*-------------------------------------------------------------------------*/ diff --git a/drivers/usb/gadget/serial.c b/drivers/usb/gadget/serial.c index e762aa19ab0..b893e3118e1 100644 --- a/drivers/usb/gadget/serial.c +++ b/drivers/usb/gadget/serial.c @@ -1120,12 +1120,15 @@ static int gs_send(struct gs_dev *dev) gs_debug_level(3, "gs_send: len=%d, 0x%2.2x 0x%2.2x 0x%2.2x ...\n", len, *((unsigned char *)req->buf), *((unsigned char *)req->buf+1), *((unsigned char *)req->buf+2)); list_del(&req_entry->re_entry); req->length = len; + spin_unlock_irqrestore(&dev->dev_lock, flags); if ((ret=usb_ep_queue(ep, req, GFP_ATOMIC))) { printk(KERN_ERR "gs_send: cannot queue read request, ret=%d\n", ret); + spin_lock_irqsave(&dev->dev_lock, flags); break; } + spin_lock_irqsave(&dev->dev_lock, flags); } else { break; } diff --git a/drivers/usb/host/Kconfig b/drivers/usb/host/Kconfig index b93d71d28db..cf10cbc98f8 100644 --- a/drivers/usb/host/Kconfig +++ b/drivers/usb/host/Kconfig @@ -83,6 +83,7 @@ config USB_OHCI_HCD tristate "OHCI HCD support" depends on USB && USB_ARCH_HAS_OHCI select ISP1301_OMAP if MACH_OMAP_H2 || MACH_OMAP_H3 + select I2C if ARCH_PNX4008 ---help--- The Open Host Controller Interface (OHCI) is a standard for accessing USB 1.1 host controller hardware. It does more in hardware than Intel's @@ -141,6 +142,34 @@ config USB_UHCI_HCD To compile this driver as a module, choose M here: the module will be called uhci-hcd. +config USB_U132_HCD + tristate "Elan U132 Adapter Host Controller" + depends on USB && USB_FTDI_ELAN + default M + help + The U132 adapter is a USB to CardBus adapter specifically designed + for PC cards that contain an OHCI host controller. Typical PC cards + are the Orange Mobile 3G Option GlobeTrotter Fusion card. The U132 + adapter will *NOT* work with PC cards that do not contain an OHCI + controller. + + For those PC cards that contain multiple OHCI controllers only ther + first one is used. + + The driver consists of two modules, the "ftdi-elan" module is a + USB client driver that interfaces to the FTDI chip within ELAN's + USB-to-PCMCIA adapter, and this "u132-hcd" module is a USB host + controller driver that talks to the OHCI controller within the + CardBus cards that are inserted in the U132 adapter. + + This driver has been tested with a CardBus OHCI USB adapter, and + worked with a USB PEN Drive inserted into the first USB port of + the PCCARD. A rather pointless thing to do, but useful for testing. + + It is safe to say M here. + + See also <http://www.elandigitalsystems.com/support/ufaq/u132linux.php> + config USB_SL811_HCD tristate "SL811HS HCD support" depends on USB diff --git a/drivers/usb/host/Makefile b/drivers/usb/host/Makefile index e3020f4b17b..a2e58c86849 100644 --- a/drivers/usb/host/Makefile +++ b/drivers/usb/host/Makefile @@ -14,4 +14,5 @@ obj-$(CONFIG_USB_OHCI_HCD) += ohci-hcd.o obj-$(CONFIG_USB_UHCI_HCD) += uhci-hcd.o obj-$(CONFIG_USB_SL811_HCD) += sl811-hcd.o obj-$(CONFIG_USB_SL811_CS) += sl811_cs.o +obj-$(CONFIG_USB_U132_HCD) += u132-hcd.o obj-$(CONFIG_ETRAX_ARCH_V10) += hc_crisv10.o diff --git a/drivers/usb/host/ehci-au1xxx.c b/drivers/usb/host/ehci-au1xxx.c index 26ed757d22a..5d1b12aad77 100644 --- a/drivers/usb/host/ehci-au1xxx.c +++ b/drivers/usb/host/ehci-au1xxx.c @@ -200,6 +200,7 @@ static const struct hc_driver ehci_au1xxx_hc_driver = { .reset = ehci_init, .start = ehci_run, .stop = ehci_stop, + .shutdown = ehci_shutdown, /* * managing i/o requests and associated device resources @@ -268,6 +269,7 @@ MODULE_ALIAS("au1xxx-ehci"); static struct platform_driver ehci_hcd_au1xxx_driver = { .probe = ehci_hcd_au1xxx_drv_probe, .remove = ehci_hcd_au1xxx_drv_remove, + .shutdown = usb_hcd_platform_shutdown, /*.suspend = ehci_hcd_au1xxx_drv_suspend, */ /*.resume = ehci_hcd_au1xxx_drv_resume, */ .driver = { diff --git a/drivers/usb/host/ehci-dbg.c b/drivers/usb/host/ehci-dbg.c index 65ac9fef3a7..23b95b2bfe1 100644 --- a/drivers/usb/host/ehci-dbg.c +++ b/drivers/usb/host/ehci-dbg.c @@ -1,6 +1,6 @@ /* * Copyright (c) 2001-2002 by David Brownell - * + * * This program is free software; you can redistribute it and/or modify it * under the terms of the GNU General Public License as published by the * Free Software Foundation; either version 2 of the License, or (at your @@ -65,7 +65,7 @@ static void dbg_hcs_params (struct ehci_hcd *ehci, char *label) for (i = 0; i < HCS_N_PORTS (params); i++) { // FIXME MIPS won't readb() ... byte = readb (&ehci->caps->portroute[(i>>1)]); - sprintf(tmp, "%d ", + sprintf(tmp, "%d ", ((i & 0x1) ? ((byte)&0xf) : ((byte>>4)&0xf))); strcat(buf, tmp); } @@ -141,12 +141,12 @@ dbg_qh (const char *label, struct ehci_hcd *ehci, struct ehci_qh *qh) } static void __attribute__((__unused__)) -dbg_itd (const char *label, struct ehci_hcd *ehci, struct ehci_itd *itd) +dbg_itd (const char *label, struct ehci_hcd *ehci, struct ehci_itd *itd) { ehci_dbg (ehci, "%s [%d] itd %p, next %08x, urb %p\n", label, itd->frame, itd, le32_to_cpu(itd->hw_next), itd->urb); ehci_dbg (ehci, - " trans: %08x %08x %08x %08x %08x %08x %08x %08x\n", + " trans: %08x %08x %08x %08x %08x %08x %08x %08x\n", le32_to_cpu(itd->hw_transaction[0]), le32_to_cpu(itd->hw_transaction[1]), le32_to_cpu(itd->hw_transaction[2]), @@ -156,7 +156,7 @@ dbg_itd (const char *label, struct ehci_hcd *ehci, struct ehci_itd *itd) le32_to_cpu(itd->hw_transaction[6]), le32_to_cpu(itd->hw_transaction[7])); ehci_dbg (ehci, - " buf: %08x %08x %08x %08x %08x %08x %08x\n", + " buf: %08x %08x %08x %08x %08x %08x %08x\n", le32_to_cpu(itd->hw_bufp[0]), le32_to_cpu(itd->hw_bufp[1]), le32_to_cpu(itd->hw_bufp[2]), @@ -171,12 +171,12 @@ dbg_itd (const char *label, struct ehci_hcd *ehci, struct ehci_itd *itd) } static void __attribute__((__unused__)) -dbg_sitd (const char *label, struct ehci_hcd *ehci, struct ehci_sitd *sitd) +dbg_sitd (const char *label, struct ehci_hcd *ehci, struct ehci_sitd *sitd) { ehci_dbg (ehci, "%s [%d] sitd %p, next %08x, urb %p\n", label, sitd->frame, sitd, le32_to_cpu(sitd->hw_next), sitd->urb); ehci_dbg (ehci, - " addr %08x sched %04x result %08x buf %08x %08x\n", + " addr %08x sched %04x result %08x buf %08x %08x\n", le32_to_cpu(sitd->hw_fullspeed_ep), le32_to_cpu(sitd->hw_uframe), le32_to_cpu(sitd->hw_results), @@ -451,7 +451,7 @@ show_async (struct class_device *class_dev, char *buf) *buf = 0; bus = class_get_devdata(class_dev); - hcd = bus->hcpriv; + hcd = bus_to_hcd(bus); ehci = hcd_to_ehci (hcd); next = buf; size = PAGE_SIZE; @@ -497,7 +497,7 @@ show_periodic (struct class_device *class_dev, char *buf) seen_count = 0; bus = class_get_devdata(class_dev); - hcd = bus->hcpriv; + hcd = bus_to_hcd(bus); ehci = hcd_to_ehci (hcd); next = buf; size = PAGE_SIZE; @@ -634,7 +634,7 @@ show_registers (struct class_device *class_dev, char *buf) static char label [] = ""; bus = class_get_devdata(class_dev); - hcd = bus->hcpriv; + hcd = bus_to_hcd(bus); ehci = hcd_to_ehci (hcd); next = buf; size = PAGE_SIZE; @@ -754,9 +754,7 @@ show_registers (struct class_device *class_dev, char *buf) } if (ehci->reclaim) { - temp = scnprintf (next, size, "reclaim qh %p%s\n", - ehci->reclaim, - ehci->reclaim_ready ? " ready" : ""); + temp = scnprintf (next, size, "reclaim qh %p\n", ehci->reclaim); size -= temp; next += temp; } @@ -785,10 +783,11 @@ static CLASS_DEVICE_ATTR (registers, S_IRUGO, show_registers, NULL); static inline void create_debug_files (struct ehci_hcd *ehci) { struct class_device *cldev = ehci_to_hcd(ehci)->self.class_dev; + int retval; - class_device_create_file(cldev, &class_device_attr_async); - class_device_create_file(cldev, &class_device_attr_periodic); - class_device_create_file(cldev, &class_device_attr_registers); + retval = class_device_create_file(cldev, &class_device_attr_async); + retval = class_device_create_file(cldev, &class_device_attr_periodic); + retval = class_device_create_file(cldev, &class_device_attr_registers); } static inline void remove_debug_files (struct ehci_hcd *ehci) diff --git a/drivers/usb/host/ehci-fsl.c b/drivers/usb/host/ehci-fsl.c index d030516edfb..1a915e982c1 100644 --- a/drivers/usb/host/ehci-fsl.c +++ b/drivers/usb/host/ehci-fsl.c @@ -285,6 +285,7 @@ static const struct hc_driver ehci_fsl_hc_driver = { .resume = ehci_bus_resume, #endif .stop = ehci_stop, + .shutdown = ehci_shutdown, /* * managing i/o requests and associated device resources @@ -329,6 +330,7 @@ MODULE_ALIAS("fsl-ehci"); static struct platform_driver ehci_fsl_driver = { .probe = ehci_fsl_drv_probe, .remove = ehci_fsl_drv_remove, + .shutdown = usb_hcd_platform_shutdown, .driver = { .name = "fsl-ehci", }, diff --git a/drivers/usb/host/ehci-hcd.c b/drivers/usb/host/ehci-hcd.c index d63177a8eae..5ac91859113 100644 --- a/drivers/usb/host/ehci-hcd.c +++ b/drivers/usb/host/ehci-hcd.c @@ -1,6 +1,6 @@ /* * Copyright (c) 2000-2004 by David Brownell - * + * * This program is free software; you can redistribute it and/or modify it * under the terms of the GNU General Public License as published by the * Free Software Foundation; either version 2 of the License, or (at your @@ -70,7 +70,7 @@ * 2002-08-06 Handling for bulk and interrupt transfers is mostly shared; * only scheduling is different, no arbitrary limitations. * 2002-07-25 Sanity check PCI reads, mostly for better cardbus support, - * clean up HC run state handshaking. + * clean up HC run state handshaking. * 2002-05-24 Preliminary FS/LS interrupts, using scheduling shortcuts * 2002-05-11 Clear TT errors for FS/LS ctrl/bulk. Fill in some other * missing pieces: enabling 64bit dma, handoff from BIOS/SMM. @@ -111,7 +111,7 @@ static const char hcd_name [] = "ehci_hcd"; #define EHCI_TUNE_MULT_TT 1 #define EHCI_TUNE_FLS 2 /* (small) 256 frame schedule */ -#define EHCI_IAA_JIFFIES (HZ/100) /* arbitrary; ~10 msec */ +#define EHCI_IAA_MSECS 10 /* arbitrary */ #define EHCI_IO_JIFFIES (HZ/10) /* io watchdog > irq_thresh */ #define EHCI_ASYNC_JIFFIES (HZ/20) /* async idle timeout */ #define EHCI_SHRINK_JIFFIES (HZ/200) /* async qh unlink delay */ @@ -254,6 +254,7 @@ static void ehci_quiesce (struct ehci_hcd *ehci) /*-------------------------------------------------------------------------*/ +static void end_unlink_async (struct ehci_hcd *ehci, struct pt_regs *regs); static void ehci_work(struct ehci_hcd *ehci, struct pt_regs *regs); #include "ehci-hub.c" @@ -263,28 +264,39 @@ static void ehci_work(struct ehci_hcd *ehci, struct pt_regs *regs); /*-------------------------------------------------------------------------*/ -static void ehci_watchdog (unsigned long param) +static void ehci_iaa_watchdog (unsigned long param) { struct ehci_hcd *ehci = (struct ehci_hcd *) param; unsigned long flags; + u32 status; spin_lock_irqsave (&ehci->lock, flags); + WARN_ON(!ehci->reclaim); - /* lost IAA irqs wedge things badly; seen with a vt8235 */ + /* lost IAA irqs wedge things badly; seen first with a vt8235 */ if (ehci->reclaim) { - u32 status = readl (&ehci->regs->status); - + status = readl (&ehci->regs->status); if (status & STS_IAA) { ehci_vdbg (ehci, "lost IAA\n"); COUNT (ehci->stats.lost_iaa); writel (STS_IAA, &ehci->regs->status); - ehci->reclaim_ready = 1; + end_unlink_async (ehci, NULL); } } - /* stop async processing after it's idled a bit */ + spin_unlock_irqrestore (&ehci->lock, flags); +} + +static void ehci_watchdog (unsigned long param) +{ + struct ehci_hcd *ehci = (struct ehci_hcd *) param; + unsigned long flags; + + spin_lock_irqsave (&ehci->lock, flags); + + /* stop async processing after it's idled a bit */ if (test_bit (TIMER_ASYNC_OFF, &ehci->actions)) - start_unlink_async (ehci, ehci->async); + start_unlink_async (ehci, ehci->async); /* ehci could run by timer, without IRQs ... */ ehci_work (ehci, NULL); @@ -292,21 +304,20 @@ static void ehci_watchdog (unsigned long param) spin_unlock_irqrestore (&ehci->lock, flags); } -/* Reboot notifiers kick in for silicon on any bus (not just pci, etc). +/* ehci_shutdown kick in for silicon on any bus (not just pci, etc). * This forcibly disables dma and IRQs, helping kexec and other cases * where the next system software may expect clean state. */ -static int -ehci_reboot (struct notifier_block *self, unsigned long code, void *null) +static void +ehci_shutdown (struct usb_hcd *hcd) { - struct ehci_hcd *ehci; + struct ehci_hcd *ehci; - ehci = container_of (self, struct ehci_hcd, reboot_notifier); + ehci = hcd_to_ehci (hcd); (void) ehci_halt (ehci); /* make BIOS/etc use companion controller during reboot */ writel (0, &ehci->regs->configured_flag); - return 0; } static void ehci_port_power (struct ehci_hcd *ehci, int is_on) @@ -334,8 +345,6 @@ static void ehci_port_power (struct ehci_hcd *ehci, int is_on) static void ehci_work (struct ehci_hcd *ehci, struct pt_regs *regs) { timer_action_done (ehci, TIMER_IO_WATCHDOG); - if (ehci->reclaim_ready) - end_unlink_async (ehci, regs); /* another CPU may drop ehci->lock during a schedule scan while * it reports urb completions. this flag guards against bogus @@ -370,6 +379,7 @@ static void ehci_stop (struct usb_hcd *hcd) /* no more interrupts ... */ del_timer_sync (&ehci->watchdog); + del_timer_sync (&ehci->iaa_watchdog); spin_lock_irq(&ehci->lock); if (HC_IS_RUNNING (hcd->state)) @@ -381,7 +391,6 @@ static void ehci_stop (struct usb_hcd *hcd) /* let companion controllers work when we aren't */ writel (0, &ehci->regs->configured_flag); - unregister_reboot_notifier (&ehci->reboot_notifier); remove_debug_files (ehci); @@ -417,6 +426,10 @@ static int ehci_init(struct usb_hcd *hcd) ehci->watchdog.function = ehci_watchdog; ehci->watchdog.data = (unsigned long) ehci; + init_timer(&ehci->iaa_watchdog); + ehci->iaa_watchdog.function = ehci_iaa_watchdog; + ehci->iaa_watchdog.data = (unsigned long) ehci; + /* * hw default: 1K periodic list heads, one per frame. * periodic_size can shrink by USBCMD update if hcc_params allows. @@ -427,13 +440,12 @@ static int ehci_init(struct usb_hcd *hcd) /* controllers may cache some of the periodic schedule ... */ hcc_params = readl(&ehci->caps->hcc_params); - if (HCC_ISOC_CACHE(hcc_params)) // full frame cache + if (HCC_ISOC_CACHE(hcc_params)) // full frame cache ehci->i_thresh = 8; else // N microframes cached ehci->i_thresh = 2 + HCC_ISOC_THRES(hcc_params); ehci->reclaim = NULL; - ehci->reclaim_ready = 0; ehci->next_uframe = -1; /* @@ -483,9 +495,6 @@ static int ehci_init(struct usb_hcd *hcd) } ehci->command = temp; - ehci->reboot_notifier.notifier_call = ehci_reboot; - register_reboot_notifier(&ehci->reboot_notifier); - return 0; } @@ -499,7 +508,6 @@ static int ehci_run (struct usb_hcd *hcd) /* EHCI spec section 4.1 */ if ((retval = ehci_reset(ehci)) != 0) { - unregister_reboot_notifier(&ehci->reboot_notifier); ehci_mem_cleanup(ehci); return retval; } @@ -611,7 +619,7 @@ static irqreturn_t ehci_irq (struct usb_hcd *hcd, struct pt_regs *regs) /* complete the unlinking of some qh [4.15.2.3] */ if (status & STS_IAA) { COUNT (ehci->stats.reclaim); - ehci->reclaim_ready = 1; + end_unlink_async (ehci, regs); bh = 1; } @@ -715,10 +723,14 @@ static int ehci_urb_enqueue ( static void unlink_async (struct ehci_hcd *ehci, struct ehci_qh *qh) { - /* if we need to use IAA and it's busy, defer */ - if (qh->qh_state == QH_STATE_LINKED - && ehci->reclaim - && HC_IS_RUNNING (ehci_to_hcd(ehci)->state)) { + // BUG_ON(qh->qh_state != QH_STATE_LINKED); + + /* failfast */ + if (!HC_IS_RUNNING (ehci_to_hcd(ehci)->state)) + end_unlink_async (ehci, NULL); + + /* defer till later if busy */ + else if (ehci->reclaim) { struct ehci_qh *last; for (last = ehci->reclaim; @@ -728,12 +740,8 @@ static void unlink_async (struct ehci_hcd *ehci, struct ehci_qh *qh) qh->qh_state = QH_STATE_UNLINK_WAIT; last->reclaim = qh; - /* bypass IAA if the hc can't care */ - } else if (!HC_IS_RUNNING (ehci_to_hcd(ehci)->state) && ehci->reclaim) - end_unlink_async (ehci, NULL); - - /* something else might have unlinked the qh by now */ - if (qh->qh_state == QH_STATE_LINKED) + /* start IAA cycle */ + } else start_unlink_async (ehci, qh); } @@ -755,7 +763,19 @@ static int ehci_urb_dequeue (struct usb_hcd *hcd, struct urb *urb) qh = (struct ehci_qh *) urb->hcpriv; if (!qh) break; - unlink_async (ehci, qh); + switch (qh->qh_state) { + case QH_STATE_LINKED: + case QH_STATE_COMPLETING: + unlink_async (ehci, qh); + break; + case QH_STATE_UNLINK: + case QH_STATE_UNLINK_WAIT: + /* already started */ + break; + case QH_STATE_IDLE: + WARN_ON(1); + break; + } break; case PIPE_INTERRUPT: @@ -847,6 +867,7 @@ rescan: unlink_async (ehci, qh); /* FALL THROUGH */ case QH_STATE_UNLINK: /* wait for hw to finish? */ + case QH_STATE_UNLINK_WAIT: idle_timeout: spin_unlock_irqrestore (&ehci->lock, flags); schedule_timeout_uninterruptible(1); diff --git a/drivers/usb/host/ehci-hub.c b/drivers/usb/host/ehci-hub.c index d03e3cad5ca..b2ee13c5851 100644 --- a/drivers/usb/host/ehci-hub.c +++ b/drivers/usb/host/ehci-hub.c @@ -1,6 +1,6 @@ /* * Copyright (C) 2001-2004 by David Brownell - * + * * This program is free software; you can redistribute it and/or modify it * under the terms of the GNU General Public License as published by the * Free Software Foundation; either version 2 of the License, or (at your @@ -48,7 +48,7 @@ static int ehci_bus_suspend (struct usb_hcd *hcd) } ehci->command = readl (&ehci->regs->command); if (ehci->reclaim) - ehci->reclaim_ready = 1; + end_unlink_async (ehci, NULL); ehci_work(ehci, NULL); /* suspend any active/unsuspended ports, maybe allow wakeup */ @@ -103,10 +103,10 @@ static int ehci_bus_resume (struct usb_hcd *hcd) /* re-init operational registers in case we lost power */ if (readl (&ehci->regs->intr_enable) == 0) { - /* at least some APM implementations will try to deliver + /* at least some APM implementations will try to deliver * IRQs right away, so delay them until we're ready. - */ - intr_enable = 1; + */ + intr_enable = 1; writel (0, &ehci->regs->segment); writel (ehci->periodic_dma, &ehci->regs->frame_list); writel ((u32)ehci->async->qh_dma, &ehci->regs->async_next); @@ -232,7 +232,7 @@ ehci_hub_status_data (struct usb_hcd *hcd, char *buf) buf [1] = 0; retval++; } - + /* no hub change reports (bit 0) for now (power, ...) */ /* port N changes (bit N)? */ @@ -304,7 +304,7 @@ ehci_hub_descriptor ( /*-------------------------------------------------------------------------*/ -#define PORT_WAKE_BITS (PORT_WKOC_E|PORT_WKDISC_E|PORT_WKCONN_E) +#define PORT_WAKE_BITS (PORT_WKOC_E|PORT_WKDISC_E|PORT_WKCONN_E) static int ehci_hub_control ( struct usb_hcd *hcd, diff --git a/drivers/usb/host/ehci-mem.c b/drivers/usb/host/ehci-mem.c index 766061e0260..a8ba2e1497a 100644 --- a/drivers/usb/host/ehci-mem.c +++ b/drivers/usb/host/ehci-mem.c @@ -1,6 +1,6 @@ /* * Copyright (c) 2001 by David Brownell - * + * * This program is free software; you can redistribute it and/or modify it * under the terms of the GNU General Public License as published by the * Free Software Foundation; either version 2 of the License, or (at your @@ -25,7 +25,7 @@ * - data used only by the HCD ... kmalloc is fine * - async and periodic schedules, shared by HC and HCD ... these * need to use dma_pool or dma_alloc_coherent - * - driver buffers, read/written by HC ... single shot DMA mapped + * - driver buffers, read/written by HC ... single shot DMA mapped * * There's also PCI "register" data, which is memory mapped. * No memory seen by this driver is pageable. @@ -119,7 +119,7 @@ static inline void qh_put (struct ehci_qh *qh) /*-------------------------------------------------------------------------*/ -/* The queue heads and transfer descriptors are managed from pools tied +/* The queue heads and transfer descriptors are managed from pools tied * to each of the "per device" structures. * This is the initialisation and cleanup code. */ @@ -165,7 +165,7 @@ static int ehci_mem_init (struct ehci_hcd *ehci, gfp_t flags) int i; /* QTDs for control/bulk/intr transfers */ - ehci->qtd_pool = dma_pool_create ("ehci_qtd", + ehci->qtd_pool = dma_pool_create ("ehci_qtd", ehci_to_hcd(ehci)->self.controller, sizeof (struct ehci_qtd), 32 /* byte alignment (for hw parts) */, @@ -175,7 +175,7 @@ static int ehci_mem_init (struct ehci_hcd *ehci, gfp_t flags) } /* QHs for control/bulk/intr transfers */ - ehci->qh_pool = dma_pool_create ("ehci_qh", + ehci->qh_pool = dma_pool_create ("ehci_qh", ehci_to_hcd(ehci)->self.controller, sizeof (struct ehci_qh), 32 /* byte alignment (for hw parts) */, @@ -189,7 +189,7 @@ static int ehci_mem_init (struct ehci_hcd *ehci, gfp_t flags) } /* ITD for high speed ISO transfers */ - ehci->itd_pool = dma_pool_create ("ehci_itd", + ehci->itd_pool = dma_pool_create ("ehci_itd", ehci_to_hcd(ehci)->self.controller, sizeof (struct ehci_itd), 32 /* byte alignment (for hw parts) */, @@ -199,7 +199,7 @@ static int ehci_mem_init (struct ehci_hcd *ehci, gfp_t flags) } /* SITD for full/low speed split ISO transfers */ - ehci->sitd_pool = dma_pool_create ("ehci_sitd", + ehci->sitd_pool = dma_pool_create ("ehci_sitd", ehci_to_hcd(ehci)->self.controller, sizeof (struct ehci_sitd), 32 /* byte alignment (for hw parts) */, diff --git a/drivers/usb/host/ehci-pci.c b/drivers/usb/host/ehci-pci.c index cadffacd945..08d0472d4f5 100644 --- a/drivers/usb/host/ehci-pci.c +++ b/drivers/usb/host/ehci-pci.c @@ -238,6 +238,12 @@ static int ehci_pci_suspend(struct usb_hcd *hcd, pm_message_t message) writel (0, &ehci->regs->intr_enable); (void)readl(&ehci->regs->intr_enable); + /* make sure snapshot being resumed re-enumerates everything */ + if (message.event == PM_EVENT_PRETHAW) { + ehci_halt(ehci); + ehci_reset(ehci); + } + clear_bit(HCD_FLAG_HW_ACCESSIBLE, &hcd->flags); bail: spin_unlock_irqrestore (&ehci->lock, flags); @@ -297,7 +303,7 @@ restart: /* emptying the schedule aborts any urbs */ spin_lock_irq(&ehci->lock); if (ehci->reclaim) - ehci->reclaim_ready = 1; + end_unlink_async (ehci, NULL); ehci_work(ehci, NULL); spin_unlock_irq(&ehci->lock); @@ -332,6 +338,7 @@ static const struct hc_driver ehci_pci_hc_driver = { .resume = ehci_pci_resume, #endif .stop = ehci_stop, + .shutdown = ehci_shutdown, /* * managing i/o requests and associated device resources @@ -378,4 +385,5 @@ static struct pci_driver ehci_pci_driver = { .suspend = usb_hcd_pci_suspend, .resume = usb_hcd_pci_resume, #endif + .shutdown = usb_hcd_pci_shutdown, }; diff --git a/drivers/usb/host/ehci-q.c b/drivers/usb/host/ehci-q.c index e469221e7ec..7fc25b6bd7d 100644 --- a/drivers/usb/host/ehci-q.c +++ b/drivers/usb/host/ehci-q.c @@ -1,6 +1,6 @@ /* * Copyright (C) 2001-2004 by David Brownell - * + * * This program is free software; you can redistribute it and/or modify it * under the terms of the GNU General Public License as published by the * Free Software Foundation; either version 2 of the License, or (at your @@ -31,7 +31,7 @@ * ISO traffic uses "ISO TD" (itd, and sitd) records, and (along with * interrupts) needs careful scheduling. Performance improvements can be * an ongoing challenge. That's in "ehci-sched.c". - * + * * USB 1.1 devices are handled (a) by "companion" OHCI or UHCI root hubs, * or otherwise through transaction translators (TTs) in USB 2.0 hubs using * (b) special fields in qh entries or (c) split iso entries. TTs will @@ -199,7 +199,7 @@ static void qtd_copy_status ( && ((token & QTD_STS_MMF) != 0 || QTD_CERR(token) == 0) && (!ehci_is_TDI(ehci) - || urb->dev->tt->hub != + || urb->dev->tt->hub != ehci_to_hcd(ehci)->self.root_hub)) { #ifdef DEBUG struct usb_device *tt = urb->dev->tt->hub; @@ -364,7 +364,7 @@ qh_completions (struct ehci_hcd *ehci, struct ehci_qh *qh, struct pt_regs *regs) */ if (likely (urb->status == -EINPROGRESS)) continue; - + /* issue status after short control reads */ if (unlikely (do_status != 0) && QTD_PID (token) == 0 /* OUT */) { @@ -388,7 +388,7 @@ halt: wmb (); } } - + /* remove it from the queue */ spin_lock (&urb->lock); qtd_copy_status (ehci, urb, qtd->length, token); @@ -518,7 +518,7 @@ qh_urb_transaction ( /* for zero length DATA stages, STATUS is always IN */ if (len == 0) token |= (1 /* "in" */ << 8); - } + } /* * data transfer stage: buffer setup @@ -759,7 +759,7 @@ qh_make ( } break; default: - dbg ("bogus dev %p speed %d", urb->dev, urb->dev->speed); + dbg ("bogus dev %p speed %d", urb->dev, urb->dev->speed); done: qh_put (qh); return NULL; @@ -967,17 +967,16 @@ static void end_unlink_async (struct ehci_hcd *ehci, struct pt_regs *regs) struct ehci_qh *qh = ehci->reclaim; struct ehci_qh *next; - timer_action_done (ehci, TIMER_IAA_WATCHDOG); + iaa_watchdog_done (ehci); // qh->hw_next = cpu_to_le32 (qh->qh_dma); qh->qh_state = QH_STATE_IDLE; qh->qh_next.qh = NULL; - qh_put (qh); // refcount from reclaim + qh_put (qh); // refcount from reclaim /* other unlink(s) may be pending (in QH_STATE_UNLINK_WAIT) */ next = qh->reclaim; ehci->reclaim = next; - ehci->reclaim_ready = 0; qh->reclaim = NULL; qh_completions (ehci, qh, regs); @@ -1031,7 +1030,7 @@ static void start_unlink_async (struct ehci_hcd *ehci, struct ehci_qh *qh) timer_action_done (ehci, TIMER_ASYNC_OFF); } return; - } + } qh->qh_state = QH_STATE_UNLINK; ehci->reclaim = qh = qh_get (qh); @@ -1046,17 +1045,16 @@ static void start_unlink_async (struct ehci_hcd *ehci, struct ehci_qh *qh) if (unlikely (ehci_to_hcd(ehci)->state == HC_STATE_HALT)) { /* if (unlikely (qh->reclaim != 0)) - * this will recurse, probably not much + * this will recurse, probably not much */ end_unlink_async (ehci, NULL); return; } - ehci->reclaim_ready = 0; cmd |= CMD_IAAD; writel (cmd, &ehci->regs->command); (void) readl (&ehci->regs->command); - timer_action (ehci, TIMER_IAA_WATCHDOG); + iaa_watchdog_start (ehci); } /*-------------------------------------------------------------------------*/ diff --git a/drivers/usb/host/ehci-sched.c b/drivers/usb/host/ehci-sched.c index 4859900bd13..e5e9c653c90 100644 --- a/drivers/usb/host/ehci-sched.c +++ b/drivers/usb/host/ehci-sched.c @@ -1,7 +1,7 @@ /* * Copyright (c) 2001-2004 by David Brownell * Copyright (c) 2003 Michal Sojka, for high-speed iso transfers - * + * * This program is free software; you can redistribute it and/or modify it * under the terms of the GNU General Public License as published by the * Free Software Foundation; either version 2 of the License, or (at your @@ -613,7 +613,7 @@ static void intr_deschedule (struct ehci_hcd *ehci, struct ehci_qh *qh) /*-------------------------------------------------------------------------*/ static int check_period ( - struct ehci_hcd *ehci, + struct ehci_hcd *ehci, unsigned frame, unsigned uframe, unsigned period, @@ -629,7 +629,7 @@ static int check_period ( /* * 80% periodic == 100 usec/uframe available - * convert "usecs we need" to "max already claimed" + * convert "usecs we need" to "max already claimed" */ usecs = 100 - usecs; @@ -659,14 +659,14 @@ static int check_period ( } static int check_intr_schedule ( - struct ehci_hcd *ehci, + struct ehci_hcd *ehci, unsigned frame, unsigned uframe, const struct ehci_qh *qh, __le32 *c_maskp ) { - int retval = -ENOSPC; + int retval = -ENOSPC; u8 mask = 0; if (qh->c_usecs && uframe >= 6) /* FSTN territory? */ @@ -701,7 +701,7 @@ static int check_intr_schedule ( /* Make sure this tt's buffer is also available for CSPLITs. * We pessimize a bit; probably the typical full speed case * doesn't need the second CSPLIT. - * + * * NOTE: both SPLIT and CSPLIT could be checked in just * one smart pass... */ @@ -728,7 +728,7 @@ done: */ static int qh_schedule (struct ehci_hcd *ehci, struct ehci_qh *qh) { - int status; + int status; unsigned uframe; __le32 c_mask; unsigned frame; /* 0..(qh->period - 1), or NO_FRAME */ @@ -784,7 +784,7 @@ static int qh_schedule (struct ehci_hcd *ehci, struct ehci_qh *qh) ehci_dbg (ehci, "reused qh %p schedule\n", qh); /* stuff into the periodic schedule */ - status = qh_link_periodic (ehci, qh); + status = qh_link_periodic (ehci, qh); done: return status; } @@ -1681,7 +1681,7 @@ static int itd_submit (struct ehci_hcd *ehci, struct urb *urb, status = -ESHUTDOWN; else status = iso_stream_schedule (ehci, urb, stream); - if (likely (status == 0)) + if (likely (status == 0)) itd_link_urb (ehci, urb, ehci->periodic_size << 3, stream); spin_unlock_irqrestore (&ehci->lock, flags); @@ -1738,7 +1738,7 @@ sitd_sched_init ( if (packet->buf1 != (buf & ~(u64)0x0fff)) packet->cross = 1; - /* OUT uses multiple start-splits */ + /* OUT uses multiple start-splits */ if (stream->bEndpointAddress & USB_DIR_IN) continue; length = (length + 187) / 188; @@ -1925,7 +1925,7 @@ sitd_link_urb ( /*-------------------------------------------------------------------------*/ #define SITD_ERRS (SITD_STS_ERR | SITD_STS_DBE | SITD_STS_BABBLE \ - | SITD_STS_XACT | SITD_STS_MMF) + | SITD_STS_XACT | SITD_STS_MMF) static unsigned sitd_complete ( @@ -2043,7 +2043,7 @@ static int sitd_submit (struct ehci_hcd *ehci, struct urb *urb, status = -ESHUTDOWN; else status = iso_stream_schedule (ehci, urb, stream); - if (status == 0) + if (status == 0) sitd_link_urb (ehci, urb, ehci->periodic_size << 3, stream); spin_unlock_irqrestore (&ehci->lock, flags); @@ -2226,5 +2226,5 @@ restart: now_uframe++; now_uframe %= mod; } - } + } } diff --git a/drivers/usb/host/ehci.h b/drivers/usb/host/ehci.h index 679c1cdcc91..6aac39f50e0 100644 --- a/drivers/usb/host/ehci.h +++ b/drivers/usb/host/ehci.h @@ -1,6 +1,6 @@ /* * Copyright (c) 2001-2002 by David Brownell - * + * * This program is free software; you can redistribute it and/or modify it * under the terms of the GNU General Public License as published by the * Free Software Foundation; either version 2 of the License, or (at your @@ -58,7 +58,6 @@ struct ehci_hcd { /* one per controller */ /* async schedule support */ struct ehci_qh *async; struct ehci_qh *reclaim; - unsigned reclaim_ready : 1; unsigned scanning : 1; /* periodic schedule support */ @@ -81,8 +80,8 @@ struct ehci_hcd { /* one per controller */ struct dma_pool *itd_pool; /* itd per iso urb */ struct dma_pool *sitd_pool; /* sitd per split iso urb */ + struct timer_list iaa_watchdog; struct timer_list watchdog; - struct notifier_block reboot_notifier; unsigned long actions; unsigned stamp; unsigned long next_statechange; @@ -104,7 +103,7 @@ struct ehci_hcd { /* one per controller */ #endif }; -/* convert between an HCD pointer and the corresponding EHCI_HCD */ +/* convert between an HCD pointer and the corresponding EHCI_HCD */ static inline struct ehci_hcd *hcd_to_ehci (struct usb_hcd *hcd) { return (struct ehci_hcd *) (hcd->hcd_priv); @@ -115,9 +114,21 @@ static inline struct usb_hcd *ehci_to_hcd (struct ehci_hcd *ehci) } +static inline void +iaa_watchdog_start (struct ehci_hcd *ehci) +{ + WARN_ON(timer_pending(&ehci->iaa_watchdog)); + mod_timer (&ehci->iaa_watchdog, + jiffies + msecs_to_jiffies(EHCI_IAA_MSECS)); +} + +static inline void iaa_watchdog_done (struct ehci_hcd *ehci) +{ + del_timer (&ehci->iaa_watchdog); +} + enum ehci_timer_action { TIMER_IO_WATCHDOG, - TIMER_IAA_WATCHDOG, TIMER_ASYNC_SHRINK, TIMER_ASYNC_OFF, }; @@ -135,9 +146,6 @@ timer_action (struct ehci_hcd *ehci, enum ehci_timer_action action) unsigned long t; switch (action) { - case TIMER_IAA_WATCHDOG: - t = EHCI_IAA_JIFFIES; - break; case TIMER_IO_WATCHDOG: t = EHCI_IO_JIFFIES; break; @@ -154,8 +162,7 @@ timer_action (struct ehci_hcd *ehci, enum ehci_timer_action action) // async queue SHRINK often precedes IAA. while it's ready // to go OFF neither can matter, and afterwards the IO // watchdog stops unless there's still periodic traffic. - if (action != TIMER_IAA_WATCHDOG - && t > ehci->watchdog.expires + if (time_before_eq(t, ehci->watchdog.expires) && timer_pending (&ehci->watchdog)) return; mod_timer (&ehci->watchdog, t); @@ -179,8 +186,8 @@ struct ehci_caps { #define HCS_INDICATOR(p) ((p)&(1 << 16)) /* true: has port indicators */ #define HCS_N_CC(p) (((p)>>12)&0xf) /* bits 15:12, #companion HCs */ #define HCS_N_PCC(p) (((p)>>8)&0xf) /* bits 11:8, ports per CC */ -#define HCS_PORTROUTED(p) ((p)&(1 << 7)) /* true: port routing */ -#define HCS_PPC(p) ((p)&(1 << 4)) /* true: port power control */ +#define HCS_PORTROUTED(p) ((p)&(1 << 7)) /* true: port routing */ +#define HCS_PPC(p) ((p)&(1 << 4)) /* true: port power control */ #define HCS_N_PORTS(p) (((p)>>0)&0xf) /* bits 3:0, ports on HC */ u32 hcc_params; /* HCCPARAMS - offset 0x8 */ @@ -205,7 +212,7 @@ struct ehci_regs { #define CMD_LRESET (1<<7) /* partial reset (no ports, etc) */ #define CMD_IAAD (1<<6) /* "doorbell" interrupt async advance */ #define CMD_ASE (1<<5) /* async schedule enable */ -#define CMD_PSE (1<<4) /* periodic schedule enable */ +#define CMD_PSE (1<<4) /* periodic schedule enable */ /* 3:2 is periodic frame list size */ #define CMD_RESET (1<<1) /* reset HC not bus */ #define CMD_RUN (1<<0) /* start/stop HC */ @@ -231,9 +238,9 @@ struct ehci_regs { /* FRINDEX: offset 0x0C */ u32 frame_index; /* current microframe number */ /* CTRLDSSEGMENT: offset 0x10 */ - u32 segment; /* address bits 63:32 if needed */ + u32 segment; /* address bits 63:32 if needed */ /* PERIODICLISTBASE: offset 0x14 */ - u32 frame_list; /* points to periodic list */ + u32 frame_list; /* points to periodic list */ /* ASYNCLISTADDR: offset 0x18 */ u32 async_next; /* address of next async queue head */ @@ -302,7 +309,7 @@ struct ehci_dbg_port { /* * EHCI Specification 0.95 Section 3.5 - * QTD: describe data transfer components (buffer, direction, ...) + * QTD: describe data transfer components (buffer, direction, ...) * See Fig 3-6 "Queue Element Transfer Descriptor Block Diagram". * * These are associated only with "QH" (Queue Head) structures, @@ -312,7 +319,7 @@ struct ehci_qtd { /* first part defined by EHCI spec */ __le32 hw_next; /* see EHCI 3.5.1 */ __le32 hw_alt_next; /* see EHCI 3.5.2 */ - __le32 hw_token; /* see EHCI 3.5.3 */ + __le32 hw_token; /* see EHCI 3.5.3 */ #define QTD_TOGGLE (1 << 31) /* data toggle */ #define QTD_LENGTH(tok) (((tok)>>16) & 0x7fff) #define QTD_IOC (1 << 15) /* interrupt on complete */ @@ -349,8 +356,8 @@ struct ehci_qtd { /* values for that type tag */ #define Q_TYPE_ITD __constant_cpu_to_le32 (0 << 1) #define Q_TYPE_QH __constant_cpu_to_le32 (1 << 1) -#define Q_TYPE_SITD __constant_cpu_to_le32 (2 << 1) -#define Q_TYPE_FSTN __constant_cpu_to_le32 (3 << 1) +#define Q_TYPE_SITD __constant_cpu_to_le32 (2 << 1) +#define Q_TYPE_FSTN __constant_cpu_to_le32 (3 << 1) /* next async queue entry, or pointer to interrupt/periodic QH */ #define QH_NEXT(dma) (cpu_to_le32(((u32)dma)&~0x01f)|Q_TYPE_QH) @@ -367,7 +374,7 @@ struct ehci_qtd { * For entries in the async schedule, the type tag always says "qh". */ union ehci_shadow { - struct ehci_qh *qh; /* Q_TYPE_QH */ + struct ehci_qh *qh; /* Q_TYPE_QH */ struct ehci_itd *itd; /* Q_TYPE_ITD */ struct ehci_sitd *sitd; /* Q_TYPE_SITD */ struct ehci_fstn *fstn; /* Q_TYPE_FSTN */ @@ -397,7 +404,7 @@ struct ehci_qh { #define QH_HUBPORT 0x3f800000 #define QH_MULT 0xc0000000 __le32 hw_current; /* qtd list - see EHCI 3.6.4 */ - + /* qtd overlay (hardware parts of a struct ehci_qtd) */ __le32 hw_qtd_next; __le32 hw_alt_next; @@ -472,7 +479,7 @@ struct ehci_iso_stream { struct list_head td_list; /* queued itds/sitds */ struct list_head free_list; /* list of unused itds/sitds */ struct usb_device *udev; - struct usb_host_endpoint *ep; + struct usb_host_endpoint *ep; /* output of (re)scheduling */ unsigned long start; /* jiffies */ @@ -492,8 +499,8 @@ struct ehci_iso_stream { unsigned bandwidth; /* This is used to initialize iTD's hw_bufp fields */ - __le32 buf0; - __le32 buf1; + __le32 buf0; + __le32 buf1; __le32 buf2; /* this is used to initialize sITD's tt info */ @@ -521,7 +528,7 @@ struct ehci_itd { #define ITD_ACTIVE __constant_cpu_to_le32(EHCI_ISOC_ACTIVE) - __le32 hw_bufp [7]; /* see EHCI 3.3.3 */ + __le32 hw_bufp [7]; /* see EHCI 3.3.3 */ __le32 hw_bufp_hi [7]; /* Appendix B */ /* the rest is HCD-private */ @@ -542,7 +549,7 @@ struct ehci_itd { /*-------------------------------------------------------------------------*/ /* - * EHCI Specification 0.95 Section 3.4 + * EHCI Specification 0.95 Section 3.4 * siTD, aka split-transaction isochronous Transfer Descriptor * ... describe full speed iso xfers through TT in hubs * see Figure 3-5 "Split-transaction Isochronous Transaction Descriptor (siTD) diff --git a/drivers/usb/host/isp116x-hcd.c b/drivers/usb/host/isp116x-hcd.c index 5147ed4a666..a72e041df8e 100644 --- a/drivers/usb/host/isp116x-hcd.c +++ b/drivers/usb/host/isp116x-hcd.c @@ -1204,10 +1204,10 @@ static int isp116x_show_dbg(struct seq_file *s, void *unused) static int isp116x_open_seq(struct inode *inode, struct file *file) { - return single_open(file, isp116x_show_dbg, inode->u.generic_ip); + return single_open(file, isp116x_show_dbg, inode->i_private); } -static struct file_operations isp116x_debug_fops = { +static const struct file_operations isp116x_debug_fops = { .open = isp116x_open_seq, .read = seq_read, .llseek = seq_lseek, diff --git a/drivers/usb/host/isp116x.h b/drivers/usb/host/isp116x.h index a1b7c3813d3..b91e2edd9c5 100644 --- a/drivers/usb/host/isp116x.h +++ b/drivers/usb/host/isp116x.h @@ -233,7 +233,7 @@ static const int cc_to_error[16] = { /* Bit Stuff */ -EPROTO, /* Data Togg */ -EILSEQ, /* Stall */ -EPIPE, - /* DevNotResp */ -ETIMEDOUT, + /* DevNotResp */ -ETIME, /* PIDCheck */ -EPROTO, /* UnExpPID */ -EPROTO, /* DataOver */ -EOVERFLOW, diff --git a/drivers/usb/host/ohci-at91.c b/drivers/usb/host/ohci-at91.c index 85cc059705a..b466581beb4 100644 --- a/drivers/usb/host/ohci-at91.c +++ b/drivers/usb/host/ohci-at91.c @@ -193,7 +193,7 @@ ohci_at91_start (struct usb_hcd *hcd) if ((ret = ohci_init(ohci)) < 0) return ret; - root->maxchild = board->ports; + ohci->num_ports = board->ports; if ((ret = ohci_run(ohci)) < 0) { err("can't start %s", hcd->self.bus_name); @@ -221,6 +221,7 @@ static const struct hc_driver ohci_at91_hc_driver = { */ .start = ohci_at91_start, .stop = ohci_stop, + .shutdown = ohci_shutdown, /* * managing i/o requests and associated device resources @@ -239,7 +240,7 @@ static const struct hc_driver ohci_at91_hc_driver = { */ .hub_status_data = ohci_hub_status_data, .hub_control = ohci_hub_control, - + .hub_irq_enable = ohci_rhsc_enable, #ifdef CONFIG_PM .bus_suspend = ohci_bus_suspend, .bus_resume = ohci_bus_resume, @@ -296,6 +297,7 @@ static int ohci_hcd_at91_drv_resume(struct platform_device *pdev) if (!clocked) { clk_enable(iclk); clk_enable(fclk); + clocked = 1; } return 0; @@ -310,6 +312,7 @@ MODULE_ALIAS("at91_ohci"); static struct platform_driver ohci_hcd_at91_driver = { .probe = ohci_hcd_at91_drv_probe, .remove = ohci_hcd_at91_drv_remove, + .shutdown = usb_hcd_platform_shutdown, .suspend = ohci_hcd_at91_drv_suspend, .resume = ohci_hcd_at91_drv_resume, .driver = { diff --git a/drivers/usb/host/ohci-au1xxx.c b/drivers/usb/host/ohci-au1xxx.c index f7a975d5db0..24e23c5783d 100644 --- a/drivers/usb/host/ohci-au1xxx.c +++ b/drivers/usb/host/ohci-au1xxx.c @@ -268,11 +268,8 @@ static const struct hc_driver ohci_au1xxx_hc_driver = { * basic lifecycle operations */ .start = ohci_au1xxx_start, -#ifdef CONFIG_PM - /* suspend: ohci_au1xxx_suspend, -- tbd */ - /* resume: ohci_au1xxx_resume, -- tbd */ -#endif /*CONFIG_PM*/ .stop = ohci_stop, + .shutdown = ohci_shutdown, /* * managing i/o requests and associated device resources @@ -291,6 +288,7 @@ static const struct hc_driver ohci_au1xxx_hc_driver = { */ .hub_status_data = ohci_hub_status_data, .hub_control = ohci_hub_control, + .hub_irq_enable = ohci_rhsc_enable, #ifdef CONFIG_PM .bus_suspend = ohci_bus_suspend, .bus_resume = ohci_bus_resume, @@ -338,6 +336,7 @@ static int ohci_hcd_au1xxx_drv_resume(struct platform_device *dev) static struct platform_driver ohci_hcd_au1xxx_driver = { .probe = ohci_hcd_au1xxx_drv_probe, .remove = ohci_hcd_au1xxx_drv_remove, + .shutdown = usb_hcd_platform_shutdown, /*.suspend = ohci_hcd_au1xxx_drv_suspend, */ /*.resume = ohci_hcd_au1xxx_drv_resume, */ .driver = { diff --git a/drivers/usb/host/ohci-dbg.c b/drivers/usb/host/ohci-dbg.c index 7bfffcbbd22..8293c1d4be3 100644 --- a/drivers/usb/host/ohci-dbg.c +++ b/drivers/usb/host/ohci-dbg.c @@ -477,7 +477,7 @@ show_async (struct class_device *class_dev, char *buf) unsigned long flags; bus = class_get_devdata(class_dev); - hcd = bus->hcpriv; + hcd = bus_to_hcd(bus); ohci = hcd_to_ohci(hcd); /* display control and bulk lists together, for simplicity */ @@ -510,7 +510,7 @@ show_periodic (struct class_device *class_dev, char *buf) seen_count = 0; bus = class_get_devdata(class_dev); - hcd = bus->hcpriv; + hcd = bus_to_hcd(bus); ohci = hcd_to_ohci(hcd); next = buf; size = PAGE_SIZE; @@ -607,7 +607,7 @@ show_registers (struct class_device *class_dev, char *buf) u32 rdata; bus = class_get_devdata(class_dev); - hcd = bus->hcpriv; + hcd = bus_to_hcd(bus); ohci = hcd_to_ohci(hcd); regs = ohci->regs; next = buf; @@ -667,6 +667,11 @@ show_registers (struct class_device *class_dev, char *buf) size -= temp; next += temp; + temp = scnprintf (next, size, "hub poll timer %s\n", + ohci_to_hcd(ohci)->poll_rh ? "ON" : "off"); + size -= temp; + next += temp; + /* roothub */ ohci_dump_roothub (ohci, 1, &next, &size); @@ -680,10 +685,11 @@ static CLASS_DEVICE_ATTR (registers, S_IRUGO, show_registers, NULL); static inline void create_debug_files (struct ohci_hcd *ohci) { struct class_device *cldev = ohci_to_hcd(ohci)->self.class_dev; + int retval; - class_device_create_file(cldev, &class_device_attr_async); - class_device_create_file(cldev, &class_device_attr_periodic); - class_device_create_file(cldev, &class_device_attr_registers); + retval = class_device_create_file(cldev, &class_device_attr_async); + retval = class_device_create_file(cldev, &class_device_attr_periodic); + retval = class_device_create_file(cldev, &class_device_attr_registers); ohci_dbg (ohci, "created debug files\n"); } diff --git a/drivers/usb/host/ohci-ep93xx.c b/drivers/usb/host/ohci-ep93xx.c index 6531c4d2652..1bf5e7a4e73 100644 --- a/drivers/usb/host/ohci-ep93xx.c +++ b/drivers/usb/host/ohci-ep93xx.c @@ -128,12 +128,14 @@ static struct hc_driver ohci_ep93xx_hc_driver = { .flags = HCD_USB11 | HCD_MEMORY, .start = ohci_ep93xx_start, .stop = ohci_stop, + .shutdown = ohci_shutdown, .urb_enqueue = ohci_urb_enqueue, .urb_dequeue = ohci_urb_dequeue, .endpoint_disable = ohci_endpoint_disable, .get_frame_number = ohci_get_frame, .hub_status_data = ohci_hub_status_data, .hub_control = ohci_hub_control, + .hub_irq_enable = ohci_rhsc_enable, #ifdef CONFIG_PM .bus_suspend = ohci_bus_suspend, .bus_resume = ohci_bus_resume, @@ -202,6 +204,7 @@ static int ohci_hcd_ep93xx_drv_resume(struct platform_device *pdev) static struct platform_driver ohci_hcd_ep93xx_driver = { .probe = ohci_hcd_ep93xx_drv_probe, .remove = ohci_hcd_ep93xx_drv_remove, + .shutdown = usb_hcd_platform_shutdown, #ifdef CONFIG_PM .suspend = ohci_hcd_ep93xx_drv_suspend, .resume = ohci_hcd_ep93xx_drv_resume, diff --git a/drivers/usb/host/ohci-hcd.c b/drivers/usb/host/ohci-hcd.c index 94d8cf4b36c..1027aa04583 100644 --- a/drivers/usb/host/ohci-hcd.c +++ b/drivers/usb/host/ohci-hcd.c @@ -88,7 +88,7 @@ #include <linux/timer.h> #include <linux/list.h> #include <linux/usb.h> -#include <linux/usb_otg.h> +#include <linux/usb/otg.h> #include <linux/dma-mapping.h> #include <linux/dmapool.h> #include <linux/reboot.h> @@ -101,7 +101,7 @@ #include "../core/hcd.h" -#define DRIVER_VERSION "2005 April 22" +#define DRIVER_VERSION "2006 August 04" #define DRIVER_AUTHOR "Roman Weissgaerber, David Brownell" #define DRIVER_DESC "USB 1.1 'Open' Host Controller (OHCI) Driver" @@ -110,9 +110,10 @@ #undef OHCI_VERBOSE_DEBUG /* not always helpful */ /* For initializing controller (mask in an HCFS mode too) */ -#define OHCI_CONTROL_INIT OHCI_CTRL_CBSR +#define OHCI_CONTROL_INIT OHCI_CTRL_CBSR #define OHCI_INTR_INIT \ - (OHCI_INTR_MIE | OHCI_INTR_UE | OHCI_INTR_RD | OHCI_INTR_WDH) + (OHCI_INTR_MIE | OHCI_INTR_RHSC | OHCI_INTR_UE \ + | OHCI_INTR_RD | OHCI_INTR_WDH) #ifdef __hppa__ /* On PA-RISC, PDC can leave IR set incorrectly; ignore it there. */ @@ -128,12 +129,13 @@ static const char hcd_name [] = "ohci_hcd"; +#define STATECHANGE_DELAY msecs_to_jiffies(300) + #include "ohci.h" static void ohci_dump (struct ohci_hcd *ohci, int verbose); static int ohci_init (struct ohci_hcd *ohci); static void ohci_stop (struct usb_hcd *hcd); -static int ohci_reboot (struct notifier_block *, unsigned long , void *); #include "ohci-hub.c" #include "ohci-dbg.c" @@ -416,21 +418,20 @@ static void ohci_usb_reset (struct ohci_hcd *ohci) ohci_writel (ohci, ohci->hc_control, &ohci->regs->control); } -/* reboot notifier forcibly disables IRQs and DMA, helping kexec and +/* ohci_shutdown forcibly disables IRQs and DMA, helping kexec and * other cases where the next software may expect clean state from the * "firmware". this is bus-neutral, unlike shutdown() methods. */ -static int -ohci_reboot (struct notifier_block *block, unsigned long code, void *null) +static void +ohci_shutdown (struct usb_hcd *hcd) { struct ohci_hcd *ohci; - ohci = container_of (block, struct ohci_hcd, reboot_notifier); + ohci = hcd_to_ohci (hcd); ohci_writel (ohci, OHCI_INTR_MIE, &ohci->regs->intrdisable); ohci_usb_reset (ohci); /* flush the writes */ (void) ohci_readl (ohci, &ohci->regs->control); - return 0; } /*-------------------------------------------------------------------------* @@ -446,7 +447,6 @@ static int ohci_init (struct ohci_hcd *ohci) disable (ohci); ohci->regs = hcd->regs; - ohci->next_statechange = jiffies; /* REVISIT this BIOS handshake is now moved into PCI "quirks", and * was never needed for most non-PCI systems ... remove the code? @@ -502,7 +502,6 @@ static int ohci_init (struct ohci_hcd *ohci) if ((ret = ohci_mem_init (ohci)) < 0) ohci_stop (hcd); else { - register_reboot_notifier (&ohci->reboot_notifier); create_debug_files (ohci); } @@ -637,10 +636,14 @@ retry: return -EOVERFLOW; } - /* start controller operations */ + /* use rhsc irqs after khubd is fully initialized */ + hcd->poll_rh = 1; + hcd->uses_new_polling = 1; + + /* start controller operations */ ohci->hc_control &= OHCI_CTRL_RWC; - ohci->hc_control |= OHCI_CONTROL_INIT | OHCI_USB_OPER; - ohci_writel (ohci, ohci->hc_control, &ohci->regs->control); + ohci->hc_control |= OHCI_CONTROL_INIT | OHCI_USB_OPER; + ohci_writel (ohci, ohci->hc_control, &ohci->regs->control); hcd->state = HC_STATE_RUNNING; /* wake on ConnectStatusChange, matching external hubs */ @@ -648,7 +651,7 @@ retry: /* Choose the interrupts we care about now, others later on demand */ mask = OHCI_INTR_INIT; - ohci_writel (ohci, mask, &ohci->regs->intrstatus); + ohci_writel (ohci, ~0, &ohci->regs->intrstatus); ohci_writel (ohci, mask, &ohci->regs->intrenable); /* handle root hub init quirks ... */ @@ -672,6 +675,7 @@ retry: // flush those writes (void) ohci_readl (ohci, &ohci->regs->control); + ohci->next_statechange = jiffies + STATECHANGE_DELAY; spin_unlock_irq (&ohci->lock); // POTPGT delay is bits 24-31, in 2 ms units. @@ -709,7 +713,23 @@ static irqreturn_t ohci_irq (struct usb_hcd *hcd, struct pt_regs *ptregs) /* interrupt for some other device? */ } else if ((ints &= ohci_readl (ohci, ®s->intrenable)) == 0) { return IRQ_NOTMINE; - } + } + + /* NOTE: vendors didn't always make the same implementation + * choices for RHSC. Sometimes it triggers on an edge (like + * setting and maybe clearing a port status change bit); and + * it's level-triggered on other silicon, active until khubd + * clears all active port status change bits. Poll by timer + * til it's fully debounced and the difference won't matter. + */ + if (ints & OHCI_INTR_RHSC) { + ohci_vdbg (ohci, "rhsc\n"); + ohci_writel (ohci, OHCI_INTR_RHSC, ®s->intrdisable); + hcd->poll_rh = 1; + ohci->next_statechange = jiffies + STATECHANGE_DELAY; + ohci_writel (ohci, OHCI_INTR_RHSC, ®s->intrstatus); + usb_hcd_poll_rh_status(hcd); + } if (ints & OHCI_INTR_UE) { disable (ohci); @@ -775,9 +795,10 @@ static void ohci_stop (struct usb_hcd *hcd) ohci_usb_reset (ohci); ohci_writel (ohci, OHCI_INTR_MIE, &ohci->regs->intrdisable); - + free_irq(hcd->irq, hcd); + hcd->irq = -1; + remove_debug_files (ohci); - unregister_reboot_notifier (&ohci->reboot_notifier); ohci_mem_cleanup (ohci); if (ohci->hcca) { dma_free_coherent (hcd->self.controller, @@ -917,6 +938,10 @@ MODULE_LICENSE ("GPL"); #include "ohci-at91.c" #endif +#ifdef CONFIG_ARCH_PNX4008 +#include "ohci-pnx4008.c" +#endif + #if !(defined(CONFIG_PCI) \ || defined(CONFIG_SA1111) \ || defined(CONFIG_ARCH_S3C2410) \ @@ -928,6 +953,7 @@ MODULE_LICENSE ("GPL"); || defined (CONFIG_USB_OHCI_HCD_PPC_SOC) \ || defined (CONFIG_ARCH_AT91RM9200) \ || defined (CONFIG_ARCH_AT91SAM9261) \ + || defined (CONFIG_ARCH_PNX4008) \ ) #error "missing bus glue for ohci-hcd" #endif diff --git a/drivers/usb/host/ohci-hub.c b/drivers/usb/host/ohci-hub.c index 5b0a23fd798..0b899339cac 100644 --- a/drivers/usb/host/ohci-hub.c +++ b/drivers/usb/host/ohci-hub.c @@ -36,6 +36,14 @@ /*-------------------------------------------------------------------------*/ +/* hcd->hub_irq_enable() */ +static void ohci_rhsc_enable (struct usb_hcd *hcd) +{ + struct ohci_hcd *ohci = hcd_to_ohci (hcd); + + ohci_writel (ohci, OHCI_INTR_RHSC, &ohci->regs->intrenable); +} + #ifdef CONFIG_PM #define OHCI_SCHED_ENABLES \ @@ -123,10 +131,10 @@ static int ohci_bus_suspend (struct usb_hcd *hcd) /* no resumes until devices finish suspending */ ohci->next_statechange = jiffies + msecs_to_jiffies (5); + /* no timer polling */ + hcd->poll_rh = 0; + done: - /* external suspend vs self autosuspend ... same effect */ - if (status == 0) - usb_hcd_suspend_root_hub(hcd); spin_unlock_irqrestore (&ohci->lock, flags); return status; } @@ -256,8 +264,8 @@ static int ohci_bus_resume (struct usb_hcd *hcd) /* TRSMRCY */ msleep (10); - /* keep it alive for ~5x suspend + resume costs */ - ohci->next_statechange = jiffies + msecs_to_jiffies (250); + /* keep it alive for more than ~5x suspend + resume costs */ + ohci->next_statechange = jiffies + STATECHANGE_DELAY; /* maybe turn schedules back on */ enables = 0; @@ -302,9 +310,10 @@ ohci_hub_status_data (struct usb_hcd *hcd, char *buf) { struct ohci_hcd *ohci = hcd_to_ohci (hcd); int i, changed = 0, length = 1; - int can_suspend = device_may_wakeup(&hcd->self.root_hub->dev); + int can_suspend; unsigned long flags; + can_suspend = device_may_wakeup(&hcd->self.root_hub->dev); spin_lock_irqsave (&ohci->lock, flags); /* handle autosuspended root: finish resuming before @@ -339,6 +348,10 @@ ohci_hub_status_data (struct usb_hcd *hcd, char *buf) for (i = 0; i < ohci->num_ports; i++) { u32 status = roothub_portstatus (ohci, i); + /* can't autosuspend with active ports */ + if ((status & RH_PS_PES) && !(status & RH_PS_PSS)) + can_suspend = 0; + if (status & (RH_PS_CSC | RH_PS_PESC | RH_PS_PSSC | RH_PS_OCIC | RH_PS_PRSC)) { changed = 1; @@ -348,32 +361,41 @@ ohci_hub_status_data (struct usb_hcd *hcd, char *buf) buf [1] |= 1 << (i - 7); continue; } + } - /* can suspend if no ports are enabled; or if all all - * enabled ports are suspended AND remote wakeup is on. - */ - if (!(status & RH_PS_CCS)) - continue; - if ((status & RH_PS_PSS) && can_suspend) - continue; + /* after root hub changes, stop polling after debouncing + * for a while and maybe kicking in autosuspend + */ + if (changed) { + ohci->next_statechange = jiffies + STATECHANGE_DELAY; can_suspend = 0; + } else if (time_before (jiffies, ohci->next_statechange)) { + can_suspend = 0; + } else { +#ifdef CONFIG_PM + can_suspend = can_suspend + && !ohci->ed_rm_list + && ((OHCI_CTRL_HCFS | OHCI_SCHED_ENABLES) + & ohci->hc_control) + == OHCI_USB_OPER; +#endif + if (hcd->uses_new_polling) { + hcd->poll_rh = 0; + /* use INTR_RHSC iff INTR_RD won't apply */ + if (!can_suspend) + ohci_writel (ohci, OHCI_INTR_RHSC, + &ohci->regs->intrenable); + } } + done: spin_unlock_irqrestore (&ohci->lock, flags); -#ifdef CONFIG_PM - /* save power by suspending idle root hubs; +#ifdef CONFIG_PM + /* save power by autosuspending idle root hubs; * INTR_RD wakes us when there's work */ - if (can_suspend - && !changed - && !ohci->ed_rm_list - && ((OHCI_CTRL_HCFS | OHCI_SCHED_ENABLES) - & ohci->hc_control) - == OHCI_USB_OPER - && time_after (jiffies, ohci->next_statechange) - && usb_trylock_device (hcd->self.root_hub) == 0 - ) { + if (can_suspend && usb_trylock_device (hcd->self.root_hub) == 0) { ohci_vdbg (ohci, "autosuspend\n"); (void) ohci_bus_suspend (hcd); usb_unlock_device (hcd->self.root_hub); diff --git a/drivers/usb/host/ohci-lh7a404.c b/drivers/usb/host/ohci-lh7a404.c index 5602da9bd52..e121d97ed91 100644 --- a/drivers/usb/host/ohci-lh7a404.c +++ b/drivers/usb/host/ohci-lh7a404.c @@ -173,11 +173,8 @@ static const struct hc_driver ohci_lh7a404_hc_driver = { * basic lifecycle operations */ .start = ohci_lh7a404_start, -#ifdef CONFIG_PM - /* suspend: ohci_lh7a404_suspend, -- tbd */ - /* resume: ohci_lh7a404_resume, -- tbd */ -#endif /*CONFIG_PM*/ .stop = ohci_stop, + .shutdown = ohci_shutdown, /* * managing i/o requests and associated device resources @@ -196,6 +193,7 @@ static const struct hc_driver ohci_lh7a404_hc_driver = { */ .hub_status_data = ohci_hub_status_data, .hub_control = ohci_hub_control, + .hub_irq_enable = ohci_rhsc_enable, #ifdef CONFIG_PM .bus_suspend = ohci_bus_suspend, .bus_resume = ohci_bus_resume, @@ -244,6 +242,7 @@ static int ohci_hcd_lh7a404_drv_resume(struct platform_device *dev) static struct platform_driver ohci_hcd_lh7a404_driver = { .probe = ohci_hcd_lh7a404_drv_probe, .remove = ohci_hcd_lh7a404_drv_remove, + .shutdown = usb_hcd_platform_shutdown, /*.suspend = ohci_hcd_lh7a404_drv_suspend, */ /*.resume = ohci_hcd_lh7a404_drv_resume, */ .driver = { diff --git a/drivers/usb/host/ohci-mem.c b/drivers/usb/host/ohci-mem.c index bfbe328a478..d976614eebd 100644 --- a/drivers/usb/host/ohci-mem.c +++ b/drivers/usb/host/ohci-mem.c @@ -28,7 +28,6 @@ static void ohci_hcd_init (struct ohci_hcd *ohci) ohci->next_statechange = jiffies; spin_lock_init (&ohci->lock); INIT_LIST_HEAD (&ohci->pending); - ohci->reboot_notifier.notifier_call = ohci_reboot; } /*-------------------------------------------------------------------------*/ diff --git a/drivers/usb/host/ohci-omap.c b/drivers/usb/host/ohci-omap.c index c4c4babd476..9c02177de50 100644 --- a/drivers/usb/host/ohci-omap.c +++ b/drivers/usb/host/ohci-omap.c @@ -4,7 +4,7 @@ * (C) Copyright 1999 Roman Weissgaerber <weissg@vienna.at> * (C) Copyright 2000-2005 David Brownell * (C) Copyright 2002 Hewlett-Packard Company - * + * * OMAP Bus Glue * * Modified for OMAP by Tony Lindgren <tony@atomide.com> @@ -66,15 +66,20 @@ extern int usb_disabled(void); extern int ocpi_enable(void); static struct clk *usb_host_ck; +static struct clk *usb_dc_ck; +static int host_enabled; +static int host_initialized; static void omap_ohci_clock_power(int on) { if (on) { + clk_enable(usb_dc_ck); clk_enable(usb_host_ck); /* guesstimate for T5 == 1x 32K clock + APLL lock time */ udelay(100); } else { clk_disable(usb_host_ck); + clk_disable(usb_dc_ck); } } @@ -87,14 +92,14 @@ static int omap_ohci_transceiver_power(int on) if (on) { if (machine_is_omap_innovator() && cpu_is_omap1510()) fpga_write(fpga_read(INNOVATOR_FPGA_CAM_USB_CONTROL) - | ((1 << 5/*usb1*/) | (1 << 3/*usb2*/)), + | ((1 << 5/*usb1*/) | (1 << 3/*usb2*/)), INNOVATOR_FPGA_CAM_USB_CONTROL); else if (machine_is_omap_osk()) tps65010_set_gpio_out_value(GPIO1, LOW); } else { if (machine_is_omap_innovator() && cpu_is_omap1510()) fpga_write(fpga_read(INNOVATOR_FPGA_CAM_USB_CONTROL) - & ~((1 << 5/*usb1*/) | (1 << 3/*usb2*/)), + & ~((1 << 5/*usb1*/) | (1 << 3/*usb2*/)), INNOVATOR_FPGA_CAM_USB_CONTROL); else if (machine_is_omap_osk()) tps65010_set_gpio_out_value(GPIO1, HIGH); @@ -103,6 +108,7 @@ static int omap_ohci_transceiver_power(int on) return 0; } +#ifdef CONFIG_ARCH_OMAP15XX /* * OMAP-1510 specific Local Bus clock on/off */ @@ -121,8 +127,8 @@ static int omap_1510_local_bus_power(int on) /* * OMAP-1510 specific Local Bus initialization * NOTE: This assumes 32MB memory size in OMAP1510LB_MEMSIZE. - * See also arch/mach-omap/memory.h for __virt_to_dma() and - * __dma_to_virt() which need to match with the physical + * See also arch/mach-omap/memory.h for __virt_to_dma() and + * __dma_to_virt() which need to match with the physical * Local Bus address below. */ static int omap_1510_local_bus_init(void) @@ -130,7 +136,7 @@ static int omap_1510_local_bus_init(void) unsigned int tlb; unsigned long lbaddr, physaddr; - omap_writel((omap_readl(OMAP1510_LB_CLOCK_DIV) & 0xfffffff8) | 0x4, + omap_writel((omap_readl(OMAP1510_LB_CLOCK_DIV) & 0xfffffff8) | 0x4, OMAP1510_LB_CLOCK_DIV); /* Configure the Local Bus MMU table */ @@ -138,7 +144,7 @@ static int omap_1510_local_bus_init(void) lbaddr = tlb * 0x00100000 + OMAP1510_LB_OFFSET; physaddr = tlb * 0x00100000 + PHYS_OFFSET; omap_writel((lbaddr & 0x0fffffff) >> 22, OMAP1510_LB_MMU_CAM_H); - omap_writel(((lbaddr & 0x003ffc00) >> 6) | 0xc, + omap_writel(((lbaddr & 0x003ffc00) >> 6) | 0xc, OMAP1510_LB_MMU_CAM_L); omap_writel(physaddr >> 16, OMAP1510_LB_MMU_RAM_H); omap_writel((physaddr & 0x0000fc00) | 0x300, OMAP1510_LB_MMU_RAM_L); @@ -152,6 +158,10 @@ static int omap_1510_local_bus_init(void) return 0; } +#else +#define omap_1510_local_bus_power(x) {} +#define omap_1510_local_bus_init() {} +#endif #ifdef CONFIG_USB_OTG @@ -173,13 +183,14 @@ static void start_hnp(struct ohci_hcd *ohci) /*-------------------------------------------------------------------------*/ -static int omap_start_hc(struct ohci_hcd *ohci, struct platform_device *pdev) +static int ohci_omap_init(struct usb_hcd *hcd) { - struct omap_usb_config *config = pdev->dev.platform_data; + struct ohci_hcd *ohci = hcd_to_ohci(hcd); + struct omap_usb_config *config = hcd->self.controller->platform_data; int need_transceiver = (config->otg != 0); int ret; - dev_dbg(&pdev->dev, "starting USB Controller\n"); + dev_dbg(hcd->self.controller, "starting USB Controller\n"); if (config->otg) { ohci_to_hcd(ohci)->self.otg_port = config->otg; @@ -200,7 +211,7 @@ static int omap_start_hc(struct ohci_hcd *ohci, struct platform_device *pdev) if (ohci->transceiver) { int status = otg_set_host(ohci->transceiver, &ohci_to_hcd(ohci)->self); - dev_dbg(&pdev->dev, "init %s transceiver, status %d\n", + dev_dbg(hcd->self.controller, "init %s transceiver, status %d\n", ohci->transceiver->label, status); if (status) { if (ohci->transceiver) @@ -208,7 +219,7 @@ static int omap_start_hc(struct ohci_hcd *ohci, struct platform_device *pdev) return status; } } else { - dev_err(&pdev->dev, "can't find transceiver\n"); + dev_err(hcd->self.controller, "can't find transceiver\n"); return -ENODEV; } } @@ -247,6 +258,10 @@ static int omap_start_hc(struct ohci_hcd *ohci, struct platform_device *pdev) } ohci_writel(ohci, rh, &ohci->regs->roothub.a); distrust_firmware = 0; + } else if (machine_is_nokia770()) { + /* We require a self-powered hub, which should have + * plenty of power. */ + ohci_to_hcd(ohci)->power_budget = 0; } /* FIXME khubd hub requests should manage power switching */ @@ -260,21 +275,15 @@ static int omap_start_hc(struct ohci_hcd *ohci, struct platform_device *pdev) return 0; } -static void omap_stop_hc(struct platform_device *pdev) +static void ohci_omap_stop(struct usb_hcd *hcd) { - dev_dbg(&pdev->dev, "stopping USB Controller\n"); + dev_dbg(hcd->self.controller, "stopping USB Controller\n"); omap_ohci_clock_power(0); } /*-------------------------------------------------------------------------*/ -void usb_hcd_omap_remove (struct usb_hcd *, struct platform_device *); - -/* configure so an HC device and id are always provided */ -/* always called with process context; sleeping is OK */ - - /** * usb_hcd_omap_probe - initialize OMAP-based HCDs * Context: !in_interrupt() @@ -283,7 +292,7 @@ void usb_hcd_omap_remove (struct usb_hcd *, struct platform_device *); * then invokes the start() method for the HCD associated with it * through the hotplug entry's driver_data. */ -int usb_hcd_omap_probe (const struct hc_driver *driver, +static int usb_hcd_omap_probe (const struct hc_driver *driver, struct platform_device *pdev) { int retval, irq; @@ -291,12 +300,12 @@ int usb_hcd_omap_probe (const struct hc_driver *driver, struct ohci_hcd *ohci; if (pdev->num_resources != 2) { - printk(KERN_ERR "hcd probe: invalid num_resources: %i\n", + printk(KERN_ERR "hcd probe: invalid num_resources: %i\n", pdev->num_resources); return -ENODEV; } - if (pdev->resource[0].flags != IORESOURCE_MEM + if (pdev->resource[0].flags != IORESOURCE_MEM || pdev->resource[1].flags != IORESOURCE_IRQ) { printk(KERN_ERR "hcd probe: invalid resource type\n"); return -ENODEV; @@ -306,6 +315,17 @@ int usb_hcd_omap_probe (const struct hc_driver *driver, if (IS_ERR(usb_host_ck)) return PTR_ERR(usb_host_ck); + if (!cpu_is_omap1510()) + usb_dc_ck = clk_get(0, "usb_dc_ck"); + else + usb_dc_ck = clk_get(0, "lb_ck"); + + if (IS_ERR(usb_dc_ck)) { + clk_put(usb_host_ck); + return PTR_ERR(usb_dc_ck); + } + + hcd = usb_create_hcd (driver, &pdev->dev, pdev->dev.bus_id); if (!hcd) { retval = -ENOMEM; @@ -325,9 +345,8 @@ int usb_hcd_omap_probe (const struct hc_driver *driver, ohci = hcd_to_ohci(hcd); ohci_hcd_init(ohci); - retval = omap_start_hc(ohci, pdev); - if (retval < 0) - goto err2; + host_initialized = 0; + host_enabled = 1; irq = platform_get_irq(pdev, 0); if (irq < 0) { @@ -335,15 +354,21 @@ int usb_hcd_omap_probe (const struct hc_driver *driver, goto err2; } retval = usb_add_hcd(hcd, irq, IRQF_DISABLED); - if (retval == 0) - return retval; + if (retval) + goto err2; + + host_initialized = 1; + + if (!host_enabled) + omap_ohci_clock_power(0); - omap_stop_hc(pdev); + return 0; err2: release_mem_region(hcd->rsrc_start, hcd->rsrc_len); err1: usb_put_hcd(hcd); err0: + clk_put(usb_dc_ck); clk_put(usb_host_ck); return retval; } @@ -359,31 +384,41 @@ err0: * Reverses the effect of usb_hcd_omap_probe(), first invoking * the HCD's stop() method. It is always called from a thread * context, normally "rmmod", "apmd", or something similar. - * */ -void usb_hcd_omap_remove (struct usb_hcd *hcd, struct platform_device *pdev) +static inline void +usb_hcd_omap_remove (struct usb_hcd *hcd, struct platform_device *pdev) { + struct ohci_hcd *ohci = hcd_to_ohci (hcd); + usb_remove_hcd(hcd); + if (ohci->transceiver) { + (void) otg_set_host(ohci->transceiver, 0); + put_device(ohci->transceiver->dev); + } if (machine_is_omap_osk()) omap_free_gpio(9); - omap_stop_hc(pdev); release_mem_region(hcd->rsrc_start, hcd->rsrc_len); usb_put_hcd(hcd); + clk_put(usb_dc_ck); clk_put(usb_host_ck); } /*-------------------------------------------------------------------------*/ -static int __devinit +static int ohci_omap_start (struct usb_hcd *hcd) { struct omap_usb_config *config; struct ohci_hcd *ohci = hcd_to_ohci (hcd); int ret; + if (!host_enabled) + return 0; config = hcd->self.controller->platform_data; - if (config->otg || config->rwc) + if (config->otg || config->rwc) { + ohci->hc_control = OHCI_CTRL_RWC; writel(OHCI_CTRL_RWC, &ohci->regs->control); + } if ((ret = ohci_run (ohci)) < 0) { dev_err(hcd->self.controller, "can't start\n"); @@ -409,8 +444,10 @@ static const struct hc_driver ohci_omap_hc_driver = { /* * basic lifecycle operations */ + .reset = ohci_omap_init, .start = ohci_omap_start, - .stop = ohci_stop, + .stop = ohci_omap_stop, + .shutdown = ohci_shutdown, /* * managing i/o requests and associated device resources @@ -429,6 +466,7 @@ static const struct hc_driver ohci_omap_hc_driver = { */ .hub_status_data = ohci_hub_status_data, .hub_control = ohci_hub_control, + .hub_irq_enable = ohci_rhsc_enable, #ifdef CONFIG_PM .bus_suspend = ohci_bus_suspend, .bus_resume = ohci_bus_resume, @@ -446,13 +484,8 @@ static int ohci_hcd_omap_drv_probe(struct platform_device *dev) static int ohci_hcd_omap_drv_remove(struct platform_device *dev) { struct usb_hcd *hcd = platform_get_drvdata(dev); - struct ohci_hcd *ohci = hcd_to_ohci (hcd); usb_hcd_omap_remove(hcd, dev); - if (ohci->transceiver) { - (void) otg_set_host(ohci->transceiver, 0); - put_device(ohci->transceiver->dev); - } platform_set_drvdata(dev, NULL); return 0; @@ -472,7 +505,7 @@ static int ohci_omap_suspend(struct platform_device *dev, pm_message_t message) omap_ohci_clock_power(0); ohci_to_hcd(ohci)->state = HC_STATE_SUSPENDED; - dev->power.power_state = PMSG_SUSPEND; + dev->dev.power.power_state = PMSG_SUSPEND; return 0; } @@ -485,8 +518,8 @@ static int ohci_omap_resume(struct platform_device *dev) ohci->next_statechange = jiffies; omap_ohci_clock_power(1); - dev->power.power_state = PMSG_ON; - usb_hcd_resume_root_hub(dev_get_drvdata(dev)); + dev->dev.power.power_state = PMSG_ON; + usb_hcd_resume_root_hub(platform_get_drvdata(dev)); return 0; } @@ -500,6 +533,7 @@ static int ohci_omap_resume(struct platform_device *dev) static struct platform_driver ohci_hcd_omap_driver = { .probe = ohci_hcd_omap_drv_probe, .remove = ohci_hcd_omap_drv_remove, + .shutdown = usb_hcd_platform_shutdown, #ifdef CONFIG_PM .suspend = ohci_omap_suspend, .resume = ohci_omap_resume, diff --git a/drivers/usb/host/ohci-pci.c b/drivers/usb/host/ohci-pci.c index b268537e389..3732db7d68e 100644 --- a/drivers/usb/host/ohci-pci.c +++ b/drivers/usb/host/ohci-pci.c @@ -135,6 +135,11 @@ static int ohci_pci_suspend (struct usb_hcd *hcd, pm_message_t message) } ohci_writel(ohci, OHCI_INTR_MIE, &ohci->regs->intrdisable); (void)ohci_readl(ohci, &ohci->regs->intrdisable); + + /* make sure snapshot being resumed re-enumerates everything */ + if (message.event == PM_EVENT_PRETHAW) + ohci_usb_reset(ohci); + clear_bit(HCD_FLAG_HW_ACCESSIBLE, &hcd->flags); bail: spin_unlock_irqrestore (&ohci->lock, flags); @@ -171,11 +176,14 @@ static const struct hc_driver ohci_pci_hc_driver = { */ .reset = ohci_pci_reset, .start = ohci_pci_start, + .stop = ohci_stop, + .shutdown = ohci_shutdown, + #ifdef CONFIG_PM + /* these suspend/resume entries are for upstream PCI glue ONLY */ .suspend = ohci_pci_suspend, .resume = ohci_pci_resume, #endif - .stop = ohci_stop, /* * managing i/o requests and associated device resources @@ -194,6 +202,7 @@ static const struct hc_driver ohci_pci_hc_driver = { */ .hub_status_data = ohci_hub_status_data, .hub_control = ohci_hub_control, + .hub_irq_enable = ohci_rhsc_enable, #ifdef CONFIG_PM .bus_suspend = ohci_bus_suspend, .bus_resume = ohci_bus_resume, @@ -224,6 +233,8 @@ static struct pci_driver ohci_pci_driver = { .suspend = usb_hcd_pci_suspend, .resume = usb_hcd_pci_resume, #endif + + .shutdown = usb_hcd_pci_shutdown, }; diff --git a/drivers/usb/host/ohci-pnx4008.c b/drivers/usb/host/ohci-pnx4008.c new file mode 100644 index 00000000000..82cb22f002e --- /dev/null +++ b/drivers/usb/host/ohci-pnx4008.c @@ -0,0 +1,476 @@ +/* + * drivers/usb/host/ohci-pnx4008.c + * + * driver for Philips PNX4008 USB Host + * + * Authors: Dmitry Chigirev <source@mvista.com> + * Vitaly Wool <vitalywool@gmail.com> + * + * register initialization is based on code examples provided by Philips + * Copyright (c) 2005 Koninklijke Philips Electronics N.V. + * + * NOTE: This driver does not have suspend/resume functionality + * This driver is intended for engineering development purposes only + * + * 2005-2006 (c) MontaVista Software, Inc. This file is licensed under + * the terms of the GNU General Public License version 2. This program + * is licensed "as is" without any warranty of any kind, whether express + * or implied. + */ +#include <linux/clk.h> +#include <linux/platform_device.h> +#include <linux/i2c.h> + +#include <asm/hardware.h> +#include <asm/io.h> +#include <asm/mach-types.h> + +#include <asm/arch/platform.h> +#include <asm/arch/irqs.h> +#include <asm/arch/gpio.h> + +#define USB_CTRL IO_ADDRESS(PNX4008_PWRMAN_BASE + 0x64) + +/* USB_CTRL bit defines */ +#define USB_SLAVE_HCLK_EN (1 << 24) +#define USB_HOST_NEED_CLK_EN (1 << 21) + +#define USB_OTG_CLK_CTRL IO_ADDRESS(PNX4008_USB_CONFIG_BASE + 0xFF4) +#define USB_OTG_CLK_STAT IO_ADDRESS(PNX4008_USB_CONFIG_BASE + 0xFF8) + +/* USB_OTG_CLK_CTRL bit defines */ +#define AHB_M_CLOCK_ON (1 << 4) +#define OTG_CLOCK_ON (1 << 3) +#define I2C_CLOCK_ON (1 << 2) +#define DEV_CLOCK_ON (1 << 1) +#define HOST_CLOCK_ON (1 << 0) + +#define USB_OTG_STAT_CONTROL IO_ADDRESS(PNX4008_USB_CONFIG_BASE + 0x110) + +/* USB_OTG_STAT_CONTROL bit defines */ +#define TRANSPARENT_I2C_EN (1 << 7) +#define HOST_EN (1 << 0) + +/* ISP1301 USB transceiver I2C registers */ +#define ISP1301_MODE_CONTROL_1 0x04 /* u8 read, set, +1 clear */ + +#define MC1_SPEED_REG (1 << 0) +#define MC1_SUSPEND_REG (1 << 1) +#define MC1_DAT_SE0 (1 << 2) +#define MC1_TRANSPARENT (1 << 3) +#define MC1_BDIS_ACON_EN (1 << 4) +#define MC1_OE_INT_EN (1 << 5) +#define MC1_UART_EN (1 << 6) +#define MC1_MASK 0x7f + +#define ISP1301_MODE_CONTROL_2 0x12 /* u8 read, set, +1 clear */ + +#define MC2_GLOBAL_PWR_DN (1 << 0) +#define MC2_SPD_SUSP_CTRL (1 << 1) +#define MC2_BI_DI (1 << 2) +#define MC2_TRANSP_BDIR0 (1 << 3) +#define MC2_TRANSP_BDIR1 (1 << 4) +#define MC2_AUDIO_EN (1 << 5) +#define MC2_PSW_EN (1 << 6) +#define MC2_EN2V7 (1 << 7) + +#define ISP1301_OTG_CONTROL_1 0x06 /* u8 read, set, +1 clear */ +# define OTG1_DP_PULLUP (1 << 0) +# define OTG1_DM_PULLUP (1 << 1) +# define OTG1_DP_PULLDOWN (1 << 2) +# define OTG1_DM_PULLDOWN (1 << 3) +# define OTG1_ID_PULLDOWN (1 << 4) +# define OTG1_VBUS_DRV (1 << 5) +# define OTG1_VBUS_DISCHRG (1 << 6) +# define OTG1_VBUS_CHRG (1 << 7) +#define ISP1301_OTG_STATUS 0x10 /* u8 readonly */ +# define OTG_B_SESS_END (1 << 6) +# define OTG_B_SESS_VLD (1 << 7) + +#define ISP1301_I2C_ADDR 0x2C + +#define ISP1301_I2C_MODE_CONTROL_1 0x4 +#define ISP1301_I2C_MODE_CONTROL_2 0x12 +#define ISP1301_I2C_OTG_CONTROL_1 0x6 +#define ISP1301_I2C_OTG_CONTROL_2 0x10 +#define ISP1301_I2C_INTERRUPT_SOURCE 0x8 +#define ISP1301_I2C_INTERRUPT_LATCH 0xA +#define ISP1301_I2C_INTERRUPT_FALLING 0xC +#define ISP1301_I2C_INTERRUPT_RISING 0xE +#define ISP1301_I2C_REG_CLEAR_ADDR 1 + +struct i2c_driver isp1301_driver; +struct i2c_client *isp1301_i2c_client; + +extern int usb_disabled(void); +extern int ocpi_enable(void); + +static struct clk *usb_clk; + +static int isp1301_probe(struct i2c_adapter *adap); +static int isp1301_detach(struct i2c_client *client); +static int isp1301_command(struct i2c_client *client, unsigned int cmd, + void *arg); + +static unsigned short normal_i2c[] = + { ISP1301_I2C_ADDR, ISP1301_I2C_ADDR + 1, I2C_CLIENT_END }; +static unsigned short dummy_i2c_addrlist[] = { I2C_CLIENT_END }; + +static struct i2c_client_address_data addr_data = { + .normal_i2c = normal_i2c, + .probe = dummy_i2c_addrlist, + .ignore = dummy_i2c_addrlist, +}; + +struct i2c_driver isp1301_driver = { + .id = I2C_DRIVERID_I2CDEV, /* Fake Id */ + .class = I2C_CLASS_HWMON, + .attach_adapter = isp1301_probe, + .detach_client = isp1301_detach, + .command = isp1301_command +}; + +static int isp1301_attach(struct i2c_adapter *adap, int addr, int kind) +{ + struct i2c_client *c; + + c = (struct i2c_client *)kzalloc(sizeof(*c), SLAB_KERNEL); + + if (!c) + return -ENOMEM; + + strcpy(c->name, "isp1301"); + c->flags = 0; + c->addr = addr; + c->adapter = adap; + c->driver = &isp1301_driver; + + isp1301_i2c_client = c; + + return i2c_attach_client(c); +} + +static int isp1301_probe(struct i2c_adapter *adap) +{ + return i2c_probe(adap, &addr_data, isp1301_attach); +} + +static int isp1301_detach(struct i2c_client *client) +{ + i2c_detach_client(client); + kfree(isp1301_i2c_client); + return 0; +} + +/* No commands defined */ +static int isp1301_command(struct i2c_client *client, unsigned int cmd, + void *arg) +{ + return 0; +} + +static void i2c_write(u8 buf, u8 subaddr) +{ + char tmpbuf[2]; + + tmpbuf[0] = subaddr; /*register number */ + tmpbuf[1] = buf; /*register data */ + i2c_master_send(isp1301_i2c_client, &tmpbuf[0], 2); +} + +static void isp1301_configure(void) +{ + /* PNX4008 only supports DAT_SE0 USB mode */ + /* PNX4008 R2A requires setting the MAX603 to output 3.6V */ + /* Power up externel charge-pump */ + + i2c_write(MC1_DAT_SE0 | MC1_SPEED_REG, ISP1301_I2C_MODE_CONTROL_1); + i2c_write(~(MC1_DAT_SE0 | MC1_SPEED_REG), + ISP1301_I2C_MODE_CONTROL_1 | ISP1301_I2C_REG_CLEAR_ADDR); + i2c_write(MC2_BI_DI | MC2_PSW_EN | MC2_SPD_SUSP_CTRL, + ISP1301_I2C_MODE_CONTROL_2); + i2c_write(~(MC2_BI_DI | MC2_PSW_EN | MC2_SPD_SUSP_CTRL), + ISP1301_I2C_MODE_CONTROL_2 | ISP1301_I2C_REG_CLEAR_ADDR); + i2c_write(OTG1_DM_PULLDOWN | OTG1_DP_PULLDOWN, + ISP1301_I2C_OTG_CONTROL_1); + i2c_write(~(OTG1_DM_PULLDOWN | OTG1_DP_PULLDOWN), + ISP1301_I2C_OTG_CONTROL_1 | ISP1301_I2C_REG_CLEAR_ADDR); + i2c_write(0xFF, + ISP1301_I2C_INTERRUPT_LATCH | ISP1301_I2C_REG_CLEAR_ADDR); + i2c_write(0xFF, + ISP1301_I2C_INTERRUPT_FALLING | ISP1301_I2C_REG_CLEAR_ADDR); + i2c_write(0xFF, + ISP1301_I2C_INTERRUPT_RISING | ISP1301_I2C_REG_CLEAR_ADDR); + +} + +static inline void isp1301_vbus_on(void) +{ + i2c_write(OTG1_VBUS_DRV, ISP1301_I2C_OTG_CONTROL_1); +} + +static inline void isp1301_vbus_off(void) +{ + i2c_write(OTG1_VBUS_DRV, + ISP1301_I2C_OTG_CONTROL_1 | ISP1301_I2C_REG_CLEAR_ADDR); +} + +static void pnx4008_start_hc(void) +{ + unsigned long tmp = __raw_readl(USB_OTG_STAT_CONTROL) | HOST_EN; + __raw_writel(tmp, USB_OTG_STAT_CONTROL); + isp1301_vbus_on(); +} + +static void pnx4008_stop_hc(void) +{ + unsigned long tmp; + isp1301_vbus_off(); + tmp = __raw_readl(USB_OTG_STAT_CONTROL) & ~HOST_EN; + __raw_writel(tmp, USB_OTG_STAT_CONTROL); +} + +static int __devinit ohci_pnx4008_start(struct usb_hcd *hcd) +{ + struct ohci_hcd *ohci = hcd_to_ohci(hcd); + int ret; + + if ((ret = ohci_init(ohci)) < 0) + return ret; + + if ((ret = ohci_run(ohci)) < 0) { + dev_err(hcd->self.controller, "can't start\n"); + ohci_stop(hcd); + return ret; + } + return 0; +} + +static const struct hc_driver ohci_pnx4008_hc_driver = { + .description = hcd_name, + .product_desc = "pnx4008 OHCI", + + /* + * generic hardware linkage + */ + .irq = ohci_irq, + .flags = HCD_USB11 | HCD_MEMORY, + + .hcd_priv_size = sizeof(struct ohci_hcd), + /* + * basic lifecycle operations + */ + .start = ohci_pnx4008_start, + .stop = ohci_stop, + + /* + * managing i/o requests and associated device resources + */ + .urb_enqueue = ohci_urb_enqueue, + .urb_dequeue = ohci_urb_dequeue, + .endpoint_disable = ohci_endpoint_disable, + + /* + * scheduling support + */ + .get_frame_number = ohci_get_frame, + + /* + * root hub support + */ + .hub_status_data = ohci_hub_status_data, + .hub_control = ohci_hub_control, + + .start_port_reset = ohci_start_port_reset, +}; + +#define USB_CLOCK_MASK (AHB_M_CLOCK_ON| OTG_CLOCK_ON | HOST_CLOCK_ON | I2C_CLOCK_ON) + +static void pnx4008_set_usb_bits(void) +{ + start_int_set_falling_edge(SE_USB_OTG_ATX_INT_N); + start_int_ack(SE_USB_OTG_ATX_INT_N); + start_int_umask(SE_USB_OTG_ATX_INT_N); + + start_int_set_rising_edge(SE_USB_OTG_TIMER_INT); + start_int_ack(SE_USB_OTG_TIMER_INT); + start_int_umask(SE_USB_OTG_TIMER_INT); + + start_int_set_rising_edge(SE_USB_I2C_INT); + start_int_ack(SE_USB_I2C_INT); + start_int_umask(SE_USB_I2C_INT); + + start_int_set_rising_edge(SE_USB_INT); + start_int_ack(SE_USB_INT); + start_int_umask(SE_USB_INT); + + start_int_set_rising_edge(SE_USB_NEED_CLK_INT); + start_int_ack(SE_USB_NEED_CLK_INT); + start_int_umask(SE_USB_NEED_CLK_INT); + + start_int_set_rising_edge(SE_USB_AHB_NEED_CLK_INT); + start_int_ack(SE_USB_AHB_NEED_CLK_INT); + start_int_umask(SE_USB_AHB_NEED_CLK_INT); +} + +static void pnx4008_unset_usb_bits(void) +{ + start_int_mask(SE_USB_OTG_ATX_INT_N); + start_int_mask(SE_USB_OTG_TIMER_INT); + start_int_mask(SE_USB_I2C_INT); + start_int_mask(SE_USB_INT); + start_int_mask(SE_USB_NEED_CLK_INT); + start_int_mask(SE_USB_AHB_NEED_CLK_INT); +} + +static int __devinit usb_hcd_pnx4008_probe(struct platform_device *pdev) +{ + struct usb_hcd *hcd = 0; + struct ohci_hcd *ohci; + const struct hc_driver *driver = &ohci_pnx4008_hc_driver; + + int ret = 0, irq; + + dev_dbg(&pdev->dev, "%s: " DRIVER_INFO " (pnx4008)\n", hcd_name); + if (usb_disabled()) { + err("USB is disabled"); + ret = -ENODEV; + goto out; + } + + if (pdev->num_resources != 2 + || pdev->resource[0].flags != IORESOURCE_MEM + || pdev->resource[1].flags != IORESOURCE_IRQ) { + err("Invalid resource configuration"); + ret = -ENODEV; + goto out; + } + + /* Enable AHB slave USB clock, needed for further USB clock control */ + __raw_writel(USB_SLAVE_HCLK_EN | (1 << 19), USB_CTRL); + + ret = i2c_add_driver(&isp1301_driver); + if (ret < 0) { + err("failed to connect I2C to ISP1301 USB Transceiver"); + goto out; + } + + isp1301_configure(); + + /* Enable USB PLL */ + usb_clk = clk_get(&pdev->dev, "ck_pll5"); + if (IS_ERR(usb_clk)) { + err("failed to acquire USB PLL"); + ret = PTR_ERR(usb_clk); + goto out1; + } + + ret = clk_enable(usb_clk); + if (ret < 0) { + err("failed to start USB PLL"); + goto out2; + } + + ret = clk_set_rate(usb_clk, 48000); + if (ret < 0) { + err("failed to set USB clock rate"); + goto out3; + } + + __raw_writel(__raw_readl(USB_CTRL) | USB_HOST_NEED_CLK_EN, USB_CTRL); + + /* Set to enable all needed USB clocks */ + __raw_writel(USB_CLOCK_MASK, USB_OTG_CLK_CTRL); + + while ((__raw_readl(USB_OTG_CLK_STAT) & USB_CLOCK_MASK) != + USB_CLOCK_MASK) ; + + hcd = usb_create_hcd (driver, &pdev->dev, pdev->dev.bus_id); + if (!hcd) { + err("Failed to allocate HC buffer"); + ret = -ENOMEM; + goto out3; + } + + /* Set all USB bits in the Start Enable register */ + pnx4008_set_usb_bits(); + + hcd->rsrc_start = pdev->resource[0].start; + hcd->rsrc_len = pdev->resource[0].end - pdev->resource[0].start + 1; + if (!request_mem_region(hcd->rsrc_start, hcd->rsrc_len, hcd_name)) { + dev_dbg(&pdev->dev, "request_mem_region failed\n"); + ret = -ENOMEM; + goto out4; + } + hcd->regs = (void __iomem *)pdev->resource[0].start; + + irq = platform_get_irq(pdev, 0); + if (irq < 0) { + ret = -ENXIO; + goto out4; + } + + hcd->self.hcpriv = (void *)hcd; + + pnx4008_start_hc(); + platform_set_drvdata(pdev, hcd); + ohci = hcd_to_ohci(hcd); + ohci_hcd_init(ohci); + + dev_info(&pdev->dev, "at 0x%p, irq %d\n", hcd->regs, hcd->irq); + ret = usb_add_hcd(hcd, irq, SA_INTERRUPT); + if (ret == 0) + return ret; + + pnx4008_stop_hc(); +out4: + pnx4008_unset_usb_bits(); + usb_put_hcd(hcd); +out3: + clk_disable(usb_clk); +out2: + clk_put(usb_clk); +out1: + i2c_del_driver(&isp1301_driver); +out: + return ret; +} + +static int usb_hcd_pnx4008_remove(struct platform_device *pdev) +{ + struct usb_hcd *hcd = platform_get_drvdata(pdev); + + usb_remove_hcd(hcd); + pnx4008_stop_hc(); + release_mem_region(hcd->rsrc_start, hcd->rsrc_len); + usb_put_hcd(hcd); + pnx4008_unset_usb_bits(); + clk_disable(usb_clk); + clk_put(usb_clk); + i2c_del_driver(&isp1301_driver); + + platform_set_drvdata(pdev, NULL); + + return 0; +} + +static struct platform_driver usb_hcd_pnx4008_driver = { + .driver = { + .name = "usb-ohci", + }, + .probe = usb_hcd_pnx4008_probe, + .remove = usb_hcd_pnx4008_remove, +}; + +static int __init usb_hcd_pnx4008_init(void) +{ + return platform_driver_register(&usb_hcd_pnx4008_driver); +} + +static void __exit usb_hcd_pnx4008_cleanup(void) +{ + return platform_driver_unregister(&usb_hcd_pnx4008_driver); +} + +module_init(usb_hcd_pnx4008_init); +module_exit(usb_hcd_pnx4008_cleanup); diff --git a/drivers/usb/host/ohci-ppc-soc.c b/drivers/usb/host/ohci-ppc-soc.c index 9fe56ff1615..d9d1ae236bd 100644 --- a/drivers/usb/host/ohci-ppc-soc.c +++ b/drivers/usb/host/ohci-ppc-soc.c @@ -148,6 +148,7 @@ static const struct hc_driver ohci_ppc_soc_hc_driver = { */ .start = ohci_ppc_soc_start, .stop = ohci_stop, + .shutdown = ohci_shutdown, /* * managing i/o requests and associated device resources @@ -166,6 +167,7 @@ static const struct hc_driver ohci_ppc_soc_hc_driver = { */ .hub_status_data = ohci_hub_status_data, .hub_control = ohci_hub_control, + .hub_irq_enable = ohci_rhsc_enable, #ifdef CONFIG_PM .bus_suspend = ohci_bus_suspend, .bus_resume = ohci_bus_resume, @@ -195,6 +197,7 @@ static int ohci_hcd_ppc_soc_drv_remove(struct platform_device *pdev) static struct platform_driver ohci_hcd_ppc_soc_driver = { .probe = ohci_hcd_ppc_soc_drv_probe, .remove = ohci_hcd_ppc_soc_drv_remove, + .shutdown = usb_hcd_platform_shutdown, #ifdef CONFIG_PM /*.suspend = ohci_hcd_ppc_soc_drv_suspend,*/ /*.resume = ohci_hcd_ppc_soc_drv_resume,*/ diff --git a/drivers/usb/host/ohci-pxa27x.c b/drivers/usb/host/ohci-pxa27x.c index 6f559e10278..e176b04d7ae 100644 --- a/drivers/usb/host/ohci-pxa27x.c +++ b/drivers/usb/host/ohci-pxa27x.c @@ -270,6 +270,7 @@ static const struct hc_driver ohci_pxa27x_hc_driver = { */ .start = ohci_pxa27x_start, .stop = ohci_stop, + .shutdown = ohci_shutdown, /* * managing i/o requests and associated device resources @@ -288,6 +289,7 @@ static const struct hc_driver ohci_pxa27x_hc_driver = { */ .hub_status_data = ohci_hub_status_data, .hub_control = ohci_hub_control, + .hub_irq_enable = ohci_rhsc_enable, #ifdef CONFIG_PM .bus_suspend = ohci_bus_suspend, .bus_resume = ohci_bus_resume, @@ -357,6 +359,7 @@ static int ohci_hcd_pxa27x_drv_resume(struct platform_device *pdev) static struct platform_driver ohci_hcd_pxa27x_driver = { .probe = ohci_hcd_pxa27x_drv_probe, .remove = ohci_hcd_pxa27x_drv_remove, + .shutdown = usb_hcd_platform_shutdown, #ifdef CONFIG_PM .suspend = ohci_hcd_pxa27x_drv_suspend, .resume = ohci_hcd_pxa27x_drv_resume, diff --git a/drivers/usb/host/ohci-s3c2410.c b/drivers/usb/host/ohci-s3c2410.c index d2fc6969a9f..59e436424d4 100644 --- a/drivers/usb/host/ohci-s3c2410.c +++ b/drivers/usb/host/ohci-s3c2410.c @@ -370,7 +370,7 @@ static int usb_hcd_s3c2410_probe (const struct hc_driver *driver, goto err_mem; } - usb_clk = clk_get(&dev->dev, "upll"); + usb_clk = clk_get(&dev->dev, "usb-bus-host"); if (IS_ERR(usb_clk)) { dev_err(&dev->dev, "cannot get usb-host clock\n"); retval = -ENOENT; @@ -447,6 +447,7 @@ static const struct hc_driver ohci_s3c2410_hc_driver = { */ .start = ohci_s3c2410_start, .stop = ohci_stop, + .shutdown = ohci_shutdown, /* * managing i/o requests and associated device resources @@ -465,6 +466,7 @@ static const struct hc_driver ohci_s3c2410_hc_driver = { */ .hub_status_data = ohci_s3c2410_hub_status_data, .hub_control = ohci_s3c2410_hub_control, + .hub_irq_enable = ohci_rhsc_enable, #ifdef CONFIG_PM .bus_suspend = ohci_bus_suspend, .bus_resume = ohci_bus_resume, @@ -490,6 +492,7 @@ static int ohci_hcd_s3c2410_drv_remove(struct platform_device *pdev) static struct platform_driver ohci_hcd_s3c2410_driver = { .probe = ohci_hcd_s3c2410_drv_probe, .remove = ohci_hcd_s3c2410_drv_remove, + .shutdown = usb_hcd_platform_shutdown, /*.suspend = ohci_hcd_s3c2410_drv_suspend, */ /*.resume = ohci_hcd_s3c2410_drv_resume, */ .driver = { diff --git a/drivers/usb/host/ohci-sa1111.c b/drivers/usb/host/ohci-sa1111.c index ce3de106cad..71371de32ad 100644 --- a/drivers/usb/host/ohci-sa1111.c +++ b/drivers/usb/host/ohci-sa1111.c @@ -212,10 +212,6 @@ static const struct hc_driver ohci_sa1111_hc_driver = { * basic lifecycle operations */ .start = ohci_sa1111_start, -#ifdef CONFIG_PM - /* suspend: ohci_sa1111_suspend, -- tbd */ - /* resume: ohci_sa1111_resume, -- tbd */ -#endif .stop = ohci_stop, /* @@ -235,6 +231,7 @@ static const struct hc_driver ohci_sa1111_hc_driver = { */ .hub_status_data = ohci_hub_status_data, .hub_control = ohci_hub_control, + .hub_irq_enable = ohci_rhsc_enable, #ifdef CONFIG_PM .bus_suspend = ohci_bus_suspend, .bus_resume = ohci_bus_resume, diff --git a/drivers/usb/host/ohci.h b/drivers/usb/host/ohci.h index caacf14371f..93fdc3c3534 100644 --- a/drivers/usb/host/ohci.h +++ b/drivers/usb/host/ohci.h @@ -159,7 +159,7 @@ static const int cc_to_error [16] = { /* Bit Stuff */ -EPROTO, /* Data Togg */ -EILSEQ, /* Stall */ -EPIPE, - /* DevNotResp */ -ETIMEDOUT, + /* DevNotResp */ -ETIME, /* PIDCheck */ -EPROTO, /* UnExpPID */ -EPROTO, /* DataOver */ -EOVERFLOW, @@ -389,8 +389,6 @@ struct ohci_hcd { unsigned long next_statechange; /* suspend/resume */ u32 fminterval; /* saved register */ - struct notifier_block reboot_notifier; - unsigned long flags; /* for HC bugs */ #define OHCI_QUIRK_AMD756 0x01 /* erratum #4 */ #define OHCI_QUIRK_SUPERIO 0x02 /* natsemi */ diff --git a/drivers/usb/host/sl811-hcd.c b/drivers/usb/host/sl811-hcd.c index fa34092bbcd..3a586aab393 100644 --- a/drivers/usb/host/sl811-hcd.c +++ b/drivers/usb/host/sl811-hcd.c @@ -597,7 +597,7 @@ done(struct sl811 *sl811, struct sl811h_ep *ep, u8 bank, struct pt_regs *regs) /* error? retry, until "3 strikes" */ } else if (++ep->error_count >= 3) { if (status & SL11H_STATMASK_TMOUT) - urbstat = -ETIMEDOUT; + urbstat = -ETIME; else if (status & SL11H_STATMASK_OVF) urbstat = -EOVERFLOW; else @@ -1517,7 +1517,7 @@ static int proc_sl811h_open(struct inode *inode, struct file *file) return single_open(file, proc_sl811h_show, PDE(inode)->data); } -static struct file_operations proc_ops = { +static const struct file_operations proc_ops = { .open = proc_sl811h_open, .read = seq_read, .llseek = seq_lseek, @@ -1783,10 +1783,15 @@ sl811h_suspend(struct platform_device *dev, pm_message_t state) struct sl811 *sl811 = hcd_to_sl811(hcd); int retval = 0; - if (state.event == PM_EVENT_FREEZE) + switch (state.event) { + case PM_EVENT_FREEZE: retval = sl811h_bus_suspend(hcd); - else if (state.event == PM_EVENT_SUSPEND) + break; + case PM_EVENT_SUSPEND: + case PM_EVENT_PRETHAW: /* explicitly discard hw state */ port_power(sl811, 0); + break; + } if (retval == 0) dev->dev.power.power_state = state; return retval; diff --git a/drivers/usb/host/u132-hcd.c b/drivers/usb/host/u132-hcd.c new file mode 100644 index 00000000000..cb2e2a604d1 --- /dev/null +++ b/drivers/usb/host/u132-hcd.c @@ -0,0 +1,3295 @@ +/* +* Host Controller Driver for the Elan Digital Systems U132 adapter +* +* Copyright(C) 2006 Elan Digital Systems Limited +* http://www.elandigitalsystems.com +* +* Author and Maintainer - Tony Olech - Elan Digital Systems +* tony.olech@elandigitalsystems.com +* +* This program is free software;you can redistribute it and/or +* modify it under the terms of the GNU General Public License as +* published by the Free Software Foundation, version 2. +* +* +* This driver was written by Tony Olech(tony.olech@elandigitalsystems.com) +* based on various USB host drivers in the 2.6.15 linux kernel +* with constant reference to the 3rd Edition of Linux Device Drivers +* published by O'Reilly +* +* The U132 adapter is a USB to CardBus adapter specifically designed +* for PC cards that contain an OHCI host controller. Typical PC cards +* are the Orange Mobile 3G Option GlobeTrotter Fusion card. +* +* The U132 adapter will *NOT *work with PC cards that do not contain +* an OHCI controller. A simple way to test whether a PC card has an +* OHCI controller as an interface is to insert the PC card directly +* into a laptop(or desktop) with a CardBus slot and if "lspci" shows +* a new USB controller and "lsusb -v" shows a new OHCI Host Controller +* then there is a good chance that the U132 adapter will support the +* PC card.(you also need the specific client driver for the PC card) +* +* Please inform the Author and Maintainer about any PC cards that +* contain OHCI Host Controller and work when directly connected to +* an embedded CardBus slot but do not work when they are connected +* via an ELAN U132 adapter. +* +*/ +#include <linux/config.h> +#include <linux/kernel.h> +#include <linux/module.h> +#include <linux/moduleparam.h> +#include <linux/delay.h> +#include <linux/ioport.h> +#include <linux/sched.h> +#include <linux/slab.h> +#include <linux/smp_lock.h> +#include <linux/errno.h> +#include <linux/init.h> +#include <linux/timer.h> +#include <linux/list.h> +#include <linux/interrupt.h> +#include <linux/usb.h> +#include <linux/workqueue.h> +#include <linux/platform_device.h> +#include <linux/pci_ids.h> +#include <asm/io.h> +#include <asm/irq.h> +#include <asm/system.h> +#include <asm/byteorder.h> +#include "../core/hcd.h" +#include "ohci.h" +#define OHCI_CONTROL_INIT OHCI_CTRL_CBSR +#define OHCI_INTR_INIT (OHCI_INTR_MIE | OHCI_INTR_UE | OHCI_INTR_RD | \ + OHCI_INTR_WDH) +MODULE_AUTHOR("Tony Olech - Elan Digital Systems Limited"); +MODULE_DESCRIPTION("U132 USB Host Controller Driver"); +MODULE_LICENSE("GPL"); +#define INT_MODULE_PARM(n, v) static int n = v;module_param(n, int, 0444) +INT_MODULE_PARM(testing, 0); +/* Some boards misreport power switching/overcurrent*/ +static int distrust_firmware = 1; +module_param(distrust_firmware, bool, 0); +MODULE_PARM_DESC(distrust_firmware, "true to distrust firmware power/overcurren" + "t setup"); +DECLARE_WAIT_QUEUE_HEAD(u132_hcd_wait); +/* +* u132_module_lock exists to protect access to global variables +* +*/ +static struct semaphore u132_module_lock; +static int u132_exiting = 0; +static int u132_instances = 0; +static struct list_head u132_static_list; +/* +* end of the global variables protected by u132_module_lock +*/ +static struct workqueue_struct *workqueue; +#define MAX_U132_PORTS 7 +#define MAX_U132_ADDRS 128 +#define MAX_U132_UDEVS 4 +#define MAX_U132_ENDPS 100 +#define MAX_U132_RINGS 4 +static const char *cc_to_text[16] = { + "No Error ", + "CRC Error ", + "Bit Stuff ", + "Data Togg ", + "Stall ", + "DevNotResp ", + "PIDCheck ", + "UnExpPID ", + "DataOver ", + "DataUnder ", + "(for hw) ", + "(for hw) ", + "BufferOver ", + "BuffUnder ", + "(for HCD) ", + "(for HCD) " +}; +struct u132_port { + struct u132 *u132; + int reset; + int enable; + int power; + int Status; +}; +struct u132_addr { + u8 address; +}; +struct u132_udev { + struct kref kref; + struct usb_device *usb_device; + u8 enumeration; + u8 udev_number; + u8 usb_addr; + u8 portnumber; + u8 endp_number_in[16]; + u8 endp_number_out[16]; +}; +#define ENDP_QUEUE_SHIFT 3 +#define ENDP_QUEUE_SIZE (1<<ENDP_QUEUE_SHIFT) +#define ENDP_QUEUE_MASK (ENDP_QUEUE_SIZE-1) +struct u132_urbq { + struct list_head urb_more; + struct urb *urb; +}; +struct u132_spin { + spinlock_t slock; +}; +struct u132_endp { + struct kref kref; + u8 udev_number; + u8 endp_number; + u8 usb_addr; + u8 usb_endp; + struct u132 *u132; + struct list_head endp_ring; + struct u132_ring *ring; + unsigned toggle_bits:2; + unsigned active:1; + unsigned delayed:1; + unsigned input:1; + unsigned output:1; + unsigned pipetype:2; + unsigned dequeueing:1; + unsigned edset_flush:1; + unsigned spare_bits:14; + unsigned long jiffies; + struct usb_host_endpoint *hep; + struct u132_spin queue_lock; + u16 queue_size; + u16 queue_last; + u16 queue_next; + struct urb *urb_list[ENDP_QUEUE_SIZE]; + struct list_head urb_more; + struct work_struct scheduler; +}; +struct u132_ring { + unsigned in_use:1; + unsigned length:7; + u8 number; + struct u132 *u132; + struct u132_endp *curr_endp; + struct work_struct scheduler; +}; +#define OHCI_QUIRK_AMD756 0x01 +#define OHCI_QUIRK_SUPERIO 0x02 +#define OHCI_QUIRK_INITRESET 0x04 +#define OHCI_BIG_ENDIAN 0x08 +#define OHCI_QUIRK_ZFMICRO 0x10 +struct u132 { + struct kref kref; + struct list_head u132_list; + struct semaphore sw_lock; + struct semaphore scheduler_lock; + struct u132_platform_data *board; + struct platform_device *platform_dev; + struct u132_ring ring[MAX_U132_RINGS]; + int sequence_num; + int going; + int power; + int reset; + int num_ports; + u32 hc_control; + u32 hc_fminterval; + u32 hc_roothub_status; + u32 hc_roothub_a; + u32 hc_roothub_portstatus[MAX_ROOT_PORTS]; + int flags; + unsigned long next_statechange; + struct work_struct monitor; + int num_endpoints; + struct u132_addr addr[MAX_U132_ADDRS]; + struct u132_udev udev[MAX_U132_UDEVS]; + struct u132_port port[MAX_U132_PORTS]; + struct u132_endp *endp[MAX_U132_ENDPS]; +}; +int usb_ftdi_elan_read_reg(struct platform_device *pdev, u32 *data); +int usb_ftdi_elan_read_pcimem(struct platform_device *pdev, u8 addressofs, + u8 width, u32 *data); +int usb_ftdi_elan_write_pcimem(struct platform_device *pdev, u8 addressofs, + u8 width, u32 data); +/* +* these can not be inlines because we need the structure offset!! +* Does anyone have a better way????? +*/ +#define u132_read_pcimem(u132, member, data) \ + usb_ftdi_elan_read_pcimem(u132->platform_dev, offsetof(struct \ + ohci_regs, member), 0, data); +#define u132_write_pcimem(u132, member, data) \ + usb_ftdi_elan_write_pcimem(u132->platform_dev, offsetof(struct \ + ohci_regs, member), 0, data); +#define u132_write_pcimem_byte(u132, member, data) \ + usb_ftdi_elan_write_pcimem(u132->platform_dev, offsetof(struct \ + ohci_regs, member), 0x0e, data); +static inline struct u132 *udev_to_u132(struct u132_udev *udev) +{ + u8 udev_number = udev->udev_number; + return container_of(udev, struct u132, udev[udev_number]); +} + +static inline struct u132 *hcd_to_u132(struct usb_hcd *hcd) +{ + return (struct u132 *)(hcd->hcd_priv); +} + +static inline struct usb_hcd *u132_to_hcd(struct u132 *u132) +{ + return container_of((void *)u132, struct usb_hcd, hcd_priv); +} + +static inline void u132_disable(struct u132 *u132) +{ + u132_to_hcd(u132)->state = HC_STATE_HALT; +} + + +#define kref_to_u132(d) container_of(d, struct u132, kref) +#define kref_to_u132_endp(d) container_of(d, struct u132_endp, kref) +#define kref_to_u132_udev(d) container_of(d, struct u132_udev, kref) +#include "../misc/usb_u132.h" +static const char hcd_name[] = "u132_hcd"; +#define PORT_C_MASK ((USB_PORT_STAT_C_CONNECTION | USB_PORT_STAT_C_ENABLE | \ + USB_PORT_STAT_C_SUSPEND | USB_PORT_STAT_C_OVERCURRENT | \ + USB_PORT_STAT_C_RESET) << 16) +static void u132_hcd_delete(struct kref *kref) +{ + struct u132 *u132 = kref_to_u132(kref); + struct platform_device *pdev = u132->platform_dev; + struct usb_hcd *hcd = u132_to_hcd(u132); + u132->going += 1; + down(&u132_module_lock); + list_del_init(&u132->u132_list); + u132_instances -= 1; + up(&u132_module_lock); + dev_warn(&u132->platform_dev->dev, "FREEING the hcd=%p and thus the u13" + "2=%p going=%d pdev=%p\n", hcd, u132, u132->going, pdev); + usb_put_hcd(hcd); +} + +static inline void u132_u132_put_kref(struct u132 *u132) +{ + kref_put(&u132->kref, u132_hcd_delete); +} + +static inline void u132_u132_init_kref(struct u132 *u132) +{ + kref_init(&u132->kref); +} + +static void u132_udev_delete(struct kref *kref) +{ + struct u132_udev *udev = kref_to_u132_udev(kref); + udev->udev_number = 0; + udev->usb_device = NULL; + udev->usb_addr = 0; + udev->enumeration = 0; +} + +static inline void u132_udev_put_kref(struct u132 *u132, struct u132_udev *udev) +{ + kref_put(&udev->kref, u132_udev_delete); +} + +static inline void u132_udev_get_kref(struct u132 *u132, struct u132_udev *udev) +{ + kref_get(&udev->kref); +} + +static inline void u132_udev_init_kref(struct u132 *u132, + struct u132_udev *udev) +{ + kref_init(&udev->kref); +} + +static inline void u132_ring_put_kref(struct u132 *u132, struct u132_ring *ring) +{ + kref_put(&u132->kref, u132_hcd_delete); +} + +static void u132_ring_requeue_work(struct u132 *u132, struct u132_ring *ring, + unsigned int delta) +{ + if (delta > 0) { + if (queue_delayed_work(workqueue, &ring->scheduler, delta)) + return; + } else if (queue_work(workqueue, &ring->scheduler)) + return; + kref_put(&u132->kref, u132_hcd_delete); + return; +} + +static void u132_ring_queue_work(struct u132 *u132, struct u132_ring *ring, + unsigned int delta) +{ + kref_get(&u132->kref); + u132_ring_requeue_work(u132, ring, delta); + return; +} + +static void u132_ring_cancel_work(struct u132 *u132, struct u132_ring *ring) +{ + if (cancel_delayed_work(&ring->scheduler)) { + kref_put(&u132->kref, u132_hcd_delete); + } +} + +static void u132_endp_delete(struct kref *kref) +{ + struct u132_endp *endp = kref_to_u132_endp(kref); + struct u132 *u132 = endp->u132; + u8 usb_addr = endp->usb_addr; + u8 usb_endp = endp->usb_endp; + u8 address = u132->addr[usb_addr].address; + struct u132_udev *udev = &u132->udev[address]; + u8 endp_number = endp->endp_number; + struct usb_host_endpoint *hep = endp->hep; + struct u132_ring *ring = endp->ring; + struct list_head *head = &endp->endp_ring; + ring->length -= 1; + if (endp == ring->curr_endp) { + if (list_empty(head)) { + ring->curr_endp = NULL; + list_del(head); + } else { + struct u132_endp *next_endp = list_entry(head->next, + struct u132_endp, endp_ring); + ring->curr_endp = next_endp; + list_del(head); + }} else + list_del(head); + if (endp->input) { + udev->endp_number_in[usb_endp] = 0; + u132_udev_put_kref(u132, udev); + } + if (endp->output) { + udev->endp_number_out[usb_endp] = 0; + u132_udev_put_kref(u132, udev); + } + u132->endp[endp_number - 1] = NULL; + hep->hcpriv = NULL; + kfree(endp); + u132_u132_put_kref(u132); +} + +static inline void u132_endp_put_kref(struct u132 *u132, struct u132_endp *endp) +{ + kref_put(&endp->kref, u132_endp_delete); +} + +static inline void u132_endp_get_kref(struct u132 *u132, struct u132_endp *endp) +{ + kref_get(&endp->kref); +} + +static inline void u132_endp_init_kref(struct u132 *u132, + struct u132_endp *endp) +{ + kref_init(&endp->kref); + kref_get(&u132->kref); +} + +static void u132_endp_queue_work(struct u132 *u132, struct u132_endp *endp, + unsigned int delta) +{ + if (delta > 0) { + if (queue_delayed_work(workqueue, &endp->scheduler, delta)) + kref_get(&endp->kref); + } else if (queue_work(workqueue, &endp->scheduler)) + kref_get(&endp->kref); + return; +} + +static void u132_endp_cancel_work(struct u132 *u132, struct u132_endp *endp) +{ + if (cancel_delayed_work(&endp->scheduler)) + kref_put(&endp->kref, u132_endp_delete); +} + +static inline void u132_monitor_put_kref(struct u132 *u132) +{ + kref_put(&u132->kref, u132_hcd_delete); +} + +static void u132_monitor_queue_work(struct u132 *u132, unsigned int delta) +{ + if (delta > 0) { + if (queue_delayed_work(workqueue, &u132->monitor, delta)) { + kref_get(&u132->kref); + } + } else if (queue_work(workqueue, &u132->monitor)) + kref_get(&u132->kref); + return; +} + +static void u132_monitor_requeue_work(struct u132 *u132, unsigned int delta) +{ + if (delta > 0) { + if (queue_delayed_work(workqueue, &u132->monitor, delta)) + return; + } else if (queue_work(workqueue, &u132->monitor)) + return; + kref_put(&u132->kref, u132_hcd_delete); + return; +} + +static void u132_monitor_cancel_work(struct u132 *u132) +{ + if (cancel_delayed_work(&u132->monitor)) + kref_put(&u132->kref, u132_hcd_delete); +} + +static int read_roothub_info(struct u132 *u132) +{ + u32 revision; + int retval; + retval = u132_read_pcimem(u132, revision, &revision); + if (retval) { + dev_err(&u132->platform_dev->dev, "error %d accessing device co" + "ntrol\n", retval); + return retval; + } else if ((revision & 0xFF) == 0x10) { + } else if ((revision & 0xFF) == 0x11) { + } else { + dev_err(&u132->platform_dev->dev, "device revision is not valid" + " %08X\n", revision); + return -ENODEV; + } + retval = u132_read_pcimem(u132, control, &u132->hc_control); + if (retval) { + dev_err(&u132->platform_dev->dev, "error %d accessing device co" + "ntrol\n", retval); + return retval; + } + retval = u132_read_pcimem(u132, roothub.status, + &u132->hc_roothub_status); + if (retval) { + dev_err(&u132->platform_dev->dev, "error %d accessing device re" + "g roothub.status\n", retval); + return retval; + } + retval = u132_read_pcimem(u132, roothub.a, &u132->hc_roothub_a); + if (retval) { + dev_err(&u132->platform_dev->dev, "error %d accessing device re" + "g roothub.a\n", retval); + return retval; + } + { + int I = u132->num_ports; + int i = 0; + while (I-- > 0) { + retval = u132_read_pcimem(u132, roothub.portstatus[i], + &u132->hc_roothub_portstatus[i]); + if (retval) { + dev_err(&u132->platform_dev->dev, "error %d acc" + "essing device roothub.portstatus[%d]\n" + , retval, i); + return retval; + } else + i += 1; + } + } + return 0; +} + +static void u132_hcd_monitor_work(void *data) +{ + struct u132 *u132 = data; + if (u132->going > 1) { + dev_err(&u132->platform_dev->dev, "device has been removed %d\n" + , u132->going); + u132_monitor_put_kref(u132); + return; + } else if (u132->going > 0) { + dev_err(&u132->platform_dev->dev, "device is being removed\n"); + u132_monitor_put_kref(u132); + return; + } else { + int retval; + down(&u132->sw_lock); + retval = read_roothub_info(u132); + if (retval) { + struct usb_hcd *hcd = u132_to_hcd(u132); + u132_disable(u132); + u132->going = 1; + up(&u132->sw_lock); + usb_hc_died(hcd); + ftdi_elan_gone_away(u132->platform_dev); + u132_monitor_put_kref(u132); + return; + } else { + u132_monitor_requeue_work(u132, 500); + up(&u132->sw_lock); + return; + } + } +} + +static void u132_hcd_giveback_urb(struct u132 *u132, struct u132_endp *endp, + struct urb *urb, int status) +{ + struct u132_ring *ring; + unsigned long irqs; + struct usb_hcd *hcd = u132_to_hcd(u132); + urb->error_count = 0; + urb->status = status; + urb->hcpriv = NULL; + spin_lock_irqsave(&endp->queue_lock.slock, irqs); + endp->queue_next += 1; + if (ENDP_QUEUE_SIZE > --endp->queue_size) { + endp->active = 0; + spin_unlock_irqrestore(&endp->queue_lock.slock, irqs); + } else { + struct list_head *next = endp->urb_more.next; + struct u132_urbq *urbq = list_entry(next, struct u132_urbq, + urb_more); + list_del(next); + endp->urb_list[ENDP_QUEUE_MASK & endp->queue_last++] = + urbq->urb; + endp->active = 0; + spin_unlock_irqrestore(&endp->queue_lock.slock, irqs); + kfree(urbq); + } down(&u132->scheduler_lock); + ring = endp->ring; + ring->in_use = 0; + u132_ring_cancel_work(u132, ring); + u132_ring_queue_work(u132, ring, 0); + up(&u132->scheduler_lock); + u132_endp_put_kref(u132, endp); + usb_hcd_giveback_urb(hcd, urb, NULL); + return; +} + +static void u132_hcd_forget_urb(struct u132 *u132, struct u132_endp *endp, + struct urb *urb, int status) +{ + u132_endp_put_kref(u132, endp); +} + +static void u132_hcd_abandon_urb(struct u132 *u132, struct u132_endp *endp, + struct urb *urb, int status) +{ + unsigned long irqs; + struct usb_hcd *hcd = u132_to_hcd(u132); + urb->error_count = 0; + urb->status = status; + urb->hcpriv = NULL; + spin_lock_irqsave(&endp->queue_lock.slock, irqs); + endp->queue_next += 1; + if (ENDP_QUEUE_SIZE > --endp->queue_size) { + endp->active = 0; + spin_unlock_irqrestore(&endp->queue_lock.slock, irqs); + } else { + struct list_head *next = endp->urb_more.next; + struct u132_urbq *urbq = list_entry(next, struct u132_urbq, + urb_more); + list_del(next); + endp->urb_list[ENDP_QUEUE_MASK & endp->queue_last++] = + urbq->urb; + endp->active = 0; + spin_unlock_irqrestore(&endp->queue_lock.slock, irqs); + kfree(urbq); + } usb_hcd_giveback_urb(hcd, urb, NULL); + return; +} + +static inline int edset_input(struct u132 *u132, struct u132_ring *ring, + struct u132_endp *endp, struct urb *urb, u8 address, u8 toggle_bits, + void (*callback) (void *endp, struct urb *urb, u8 *buf, int len, + int toggle_bits, int error_count, int condition_code, int repeat_number, + int halted, int skipped, int actual, int non_null)) +{ + return usb_ftdi_elan_edset_input(u132->platform_dev, ring->number, endp, + urb, address, endp->usb_endp, toggle_bits, callback); +} + +static inline int edset_setup(struct u132 *u132, struct u132_ring *ring, + struct u132_endp *endp, struct urb *urb, u8 address, u8 toggle_bits, + void (*callback) (void *endp, struct urb *urb, u8 *buf, int len, + int toggle_bits, int error_count, int condition_code, int repeat_number, + int halted, int skipped, int actual, int non_null)) +{ + return usb_ftdi_elan_edset_setup(u132->platform_dev, ring->number, endp, + urb, address, endp->usb_endp, toggle_bits, callback); +} + +static inline int edset_single(struct u132 *u132, struct u132_ring *ring, + struct u132_endp *endp, struct urb *urb, u8 address, u8 toggle_bits, + void (*callback) (void *endp, struct urb *urb, u8 *buf, int len, + int toggle_bits, int error_count, int condition_code, int repeat_number, + int halted, int skipped, int actual, int non_null)) +{ + return usb_ftdi_elan_edset_single(u132->platform_dev, ring->number, + endp, urb, address, endp->usb_endp, toggle_bits, callback); +} + +static inline int edset_output(struct u132 *u132, struct u132_ring *ring, + struct u132_endp *endp, struct urb *urb, u8 address, u8 toggle_bits, + void (*callback) (void *endp, struct urb *urb, u8 *buf, int len, + int toggle_bits, int error_count, int condition_code, int repeat_number, + int halted, int skipped, int actual, int non_null)) +{ + return usb_ftdi_elan_edset_output(u132->platform_dev, ring->number, + endp, urb, address, endp->usb_endp, toggle_bits, callback); +} + + +/* +* must not LOCK sw_lock +* +*/ +static void u132_hcd_interrupt_recv(void *data, struct urb *urb, u8 *buf, + int len, int toggle_bits, int error_count, int condition_code, + int repeat_number, int halted, int skipped, int actual, int non_null) +{ + struct u132_endp *endp = data; + struct u132 *u132 = endp->u132; + u8 address = u132->addr[endp->usb_addr].address; + struct u132_udev *udev = &u132->udev[address]; + down(&u132->scheduler_lock); + if (u132->going > 1) { + dev_err(&u132->platform_dev->dev, "device has been removed %d\n" + , u132->going); + up(&u132->scheduler_lock); + u132_hcd_forget_urb(u132, endp, urb, -ENODEV); + return; + } else if (endp->dequeueing) { + endp->dequeueing = 0; + up(&u132->scheduler_lock); + u132_hcd_giveback_urb(u132, endp, urb, -EINTR); + return; + } else if (u132->going > 0) { + dev_err(&u132->platform_dev->dev, "device is being removed urb=" + "%p status=%d\n", urb, urb->status); + up(&u132->scheduler_lock); + u132_hcd_giveback_urb(u132, endp, urb, -ENODEV); + return; + } else if (urb->status == -EINPROGRESS) { + struct u132_ring *ring = endp->ring; + u8 *u = urb->transfer_buffer + urb->actual_length; + u8 *b = buf; + int L = len; + while (L-- > 0) { + *u++ = *b++; + } + urb->actual_length += len; + if ((condition_code == TD_CC_NOERROR) && + (urb->transfer_buffer_length > urb->actual_length)) { + endp->toggle_bits = toggle_bits; + usb_settoggle(udev->usb_device, endp->usb_endp, 0, + 1 & toggle_bits); + if (urb->actual_length > 0) { + int retval; + up(&u132->scheduler_lock); + retval = edset_single(u132, ring, endp, urb, + address, endp->toggle_bits, + u132_hcd_interrupt_recv); + if (retval == 0) { + } else + u132_hcd_giveback_urb(u132, endp, urb, + retval); + } else { + ring->in_use = 0; + endp->active = 0; + endp->jiffies = jiffies + + msecs_to_jiffies(urb->interval); + u132_ring_cancel_work(u132, ring); + u132_ring_queue_work(u132, ring, 0); + up(&u132->scheduler_lock); + u132_endp_put_kref(u132, endp); + } + return; + } else if ((condition_code == TD_DATAUNDERRUN) && + ((urb->transfer_flags & URB_SHORT_NOT_OK) == 0)) { + endp->toggle_bits = toggle_bits; + usb_settoggle(udev->usb_device, endp->usb_endp, 0, + 1 & toggle_bits); + up(&u132->scheduler_lock); + u132_hcd_giveback_urb(u132, endp, urb, 0); + return; + } else { + if (condition_code == TD_CC_NOERROR) { + endp->toggle_bits = toggle_bits; + usb_settoggle(udev->usb_device, endp->usb_endp, + 0, 1 & toggle_bits); + } else if (condition_code == TD_CC_STALL) { + endp->toggle_bits = 0x2; + usb_settoggle(udev->usb_device, endp->usb_endp, + 0, 0); + } else { + endp->toggle_bits = 0x2; + usb_settoggle(udev->usb_device, endp->usb_endp, + 0, 0); + dev_err(&u132->platform_dev->dev, "urb=%p givin" + "g back INTERRUPT %s\n", urb, + cc_to_text[condition_code]); + } + up(&u132->scheduler_lock); + u132_hcd_giveback_urb(u132, endp, urb, + cc_to_error[condition_code]); + return; + } + } else { + dev_err(&u132->platform_dev->dev, "CALLBACK called urb=%p statu" + "s=%d\n", urb, urb->status); + up(&u132->scheduler_lock); + u132_hcd_giveback_urb(u132, endp, urb, urb->status); + return; + } +} + +static void u132_hcd_bulk_output_sent(void *data, struct urb *urb, u8 *buf, + int len, int toggle_bits, int error_count, int condition_code, + int repeat_number, int halted, int skipped, int actual, int non_null) +{ + struct u132_endp *endp = data; + struct u132 *u132 = endp->u132; + u8 address = u132->addr[endp->usb_addr].address; + down(&u132->scheduler_lock); + if (u132->going > 1) { + dev_err(&u132->platform_dev->dev, "device has been removed %d\n" + , u132->going); + up(&u132->scheduler_lock); + u132_hcd_forget_urb(u132, endp, urb, -ENODEV); + return; + } else if (endp->dequeueing) { + endp->dequeueing = 0; + up(&u132->scheduler_lock); + u132_hcd_giveback_urb(u132, endp, urb, -EINTR); + return; + } else if (u132->going > 0) { + dev_err(&u132->platform_dev->dev, "device is being removed urb=" + "%p status=%d\n", urb, urb->status); + up(&u132->scheduler_lock); + u132_hcd_giveback_urb(u132, endp, urb, -ENODEV); + return; + } else if (urb->status == -EINPROGRESS) { + struct u132_ring *ring = endp->ring; + urb->actual_length += len; + endp->toggle_bits = toggle_bits; + if (urb->transfer_buffer_length > urb->actual_length) { + int retval; + up(&u132->scheduler_lock); + retval = edset_output(u132, ring, endp, urb, address, + endp->toggle_bits, u132_hcd_bulk_output_sent); + if (retval == 0) { + } else + u132_hcd_giveback_urb(u132, endp, urb, retval); + return; + } else { + up(&u132->scheduler_lock); + u132_hcd_giveback_urb(u132, endp, urb, 0); + return; + } + } else { + dev_err(&u132->platform_dev->dev, "CALLBACK called urb=%p statu" + "s=%d\n", urb, urb->status); + up(&u132->scheduler_lock); + u132_hcd_giveback_urb(u132, endp, urb, urb->status); + return; + } +} + +static void u132_hcd_bulk_input_recv(void *data, struct urb *urb, u8 *buf, + int len, int toggle_bits, int error_count, int condition_code, + int repeat_number, int halted, int skipped, int actual, int non_null) +{ + struct u132_endp *endp = data; + struct u132 *u132 = endp->u132; + u8 address = u132->addr[endp->usb_addr].address; + struct u132_udev *udev = &u132->udev[address]; + down(&u132->scheduler_lock); + if (u132->going > 1) { + dev_err(&u132->platform_dev->dev, "device has been removed %d\n" + , u132->going); + up(&u132->scheduler_lock); + u132_hcd_forget_urb(u132, endp, urb, -ENODEV); + return; + } else if (endp->dequeueing) { + endp->dequeueing = 0; + up(&u132->scheduler_lock); + u132_hcd_giveback_urb(u132, endp, urb, -EINTR); + return; + } else if (u132->going > 0) { + dev_err(&u132->platform_dev->dev, "device is being removed urb=" + "%p status=%d\n", urb, urb->status); + up(&u132->scheduler_lock); + u132_hcd_giveback_urb(u132, endp, urb, -ENODEV); + return; + } else if (urb->status == -EINPROGRESS) { + struct u132_ring *ring = endp->ring; + u8 *u = urb->transfer_buffer + urb->actual_length; + u8 *b = buf; + int L = len; + while (L-- > 0) { + *u++ = *b++; + } + urb->actual_length += len; + if ((condition_code == TD_CC_NOERROR) && + (urb->transfer_buffer_length > urb->actual_length)) { + int retval; + endp->toggle_bits = toggle_bits; + usb_settoggle(udev->usb_device, endp->usb_endp, 0, + 1 & toggle_bits); + up(&u132->scheduler_lock); + retval = usb_ftdi_elan_edset_input(u132->platform_dev, + ring->number, endp, urb, address, + endp->usb_endp, endp->toggle_bits, + u132_hcd_bulk_input_recv); + if (retval == 0) { + } else + u132_hcd_giveback_urb(u132, endp, urb, retval); + return; + } else if (condition_code == TD_CC_NOERROR) { + endp->toggle_bits = toggle_bits; + usb_settoggle(udev->usb_device, endp->usb_endp, 0, + 1 & toggle_bits); + up(&u132->scheduler_lock); + u132_hcd_giveback_urb(u132, endp, urb, + cc_to_error[condition_code]); + return; + } else if ((condition_code == TD_DATAUNDERRUN) && + ((urb->transfer_flags & URB_SHORT_NOT_OK) == 0)) { + endp->toggle_bits = toggle_bits; + usb_settoggle(udev->usb_device, endp->usb_endp, 0, + 1 & toggle_bits); + up(&u132->scheduler_lock); + u132_hcd_giveback_urb(u132, endp, urb, 0); + return; + } else if (condition_code == TD_DATAUNDERRUN) { + endp->toggle_bits = toggle_bits; + usb_settoggle(udev->usb_device, endp->usb_endp, 0, + 1 & toggle_bits); + dev_warn(&u132->platform_dev->dev, "urb=%p(SHORT NOT OK" + ") giving back BULK IN %s\n", urb, + cc_to_text[condition_code]); + up(&u132->scheduler_lock); + u132_hcd_giveback_urb(u132, endp, urb, 0); + return; + } else if (condition_code == TD_CC_STALL) { + endp->toggle_bits = 0x2; + usb_settoggle(udev->usb_device, endp->usb_endp, 0, 0); + up(&u132->scheduler_lock); + u132_hcd_giveback_urb(u132, endp, urb, + cc_to_error[condition_code]); + return; + } else { + endp->toggle_bits = 0x2; + usb_settoggle(udev->usb_device, endp->usb_endp, 0, 0); + dev_err(&u132->platform_dev->dev, "urb=%p giving back B" + "ULK IN code=%d %s\n", urb, condition_code, + cc_to_text[condition_code]); + up(&u132->scheduler_lock); + u132_hcd_giveback_urb(u132, endp, urb, + cc_to_error[condition_code]); + return; + } + } else { + dev_err(&u132->platform_dev->dev, "CALLBACK called urb=%p statu" + "s=%d\n", urb, urb->status); + up(&u132->scheduler_lock); + u132_hcd_giveback_urb(u132, endp, urb, urb->status); + return; + } +} + +static void u132_hcd_configure_empty_sent(void *data, struct urb *urb, u8 *buf, + int len, int toggle_bits, int error_count, int condition_code, + int repeat_number, int halted, int skipped, int actual, int non_null) +{ + struct u132_endp *endp = data; + struct u132 *u132 = endp->u132; + down(&u132->scheduler_lock); + if (u132->going > 1) { + dev_err(&u132->platform_dev->dev, "device has been removed %d\n" + , u132->going); + up(&u132->scheduler_lock); + u132_hcd_forget_urb(u132, endp, urb, -ENODEV); + return; + } else if (endp->dequeueing) { + endp->dequeueing = 0; + up(&u132->scheduler_lock); + u132_hcd_giveback_urb(u132, endp, urb, -EINTR); + return; + } else if (u132->going > 0) { + dev_err(&u132->platform_dev->dev, "device is being removed urb=" + "%p status=%d\n", urb, urb->status); + up(&u132->scheduler_lock); + u132_hcd_giveback_urb(u132, endp, urb, -ENODEV); + return; + } else if (urb->status == -EINPROGRESS) { + up(&u132->scheduler_lock); + u132_hcd_giveback_urb(u132, endp, urb, 0); + return; + } else { + dev_err(&u132->platform_dev->dev, "CALLBACK called urb=%p statu" + "s=%d\n", urb, urb->status); + up(&u132->scheduler_lock); + u132_hcd_giveback_urb(u132, endp, urb, urb->status); + return; + } +} + +static void u132_hcd_configure_input_recv(void *data, struct urb *urb, u8 *buf, + int len, int toggle_bits, int error_count, int condition_code, + int repeat_number, int halted, int skipped, int actual, int non_null) +{ + struct u132_endp *endp = data; + struct u132 *u132 = endp->u132; + u8 address = u132->addr[endp->usb_addr].address; + down(&u132->scheduler_lock); + if (u132->going > 1) { + dev_err(&u132->platform_dev->dev, "device has been removed %d\n" + , u132->going); + up(&u132->scheduler_lock); + u132_hcd_forget_urb(u132, endp, urb, -ENODEV); + return; + } else if (endp->dequeueing) { + endp->dequeueing = 0; + up(&u132->scheduler_lock); + u132_hcd_giveback_urb(u132, endp, urb, -EINTR); + return; + } else if (u132->going > 0) { + dev_err(&u132->platform_dev->dev, "device is being removed urb=" + "%p status=%d\n", urb, urb->status); + up(&u132->scheduler_lock); + u132_hcd_giveback_urb(u132, endp, urb, -ENODEV); + return; + } else if (urb->status == -EINPROGRESS) { + struct u132_ring *ring = endp->ring; + u8 *u = urb->transfer_buffer; + u8 *b = buf; + int L = len; + while (L-- > 0) { + *u++ = *b++; + } + urb->actual_length = len; + if ((condition_code == TD_CC_NOERROR) || ((condition_code == + TD_DATAUNDERRUN) && ((urb->transfer_flags & + URB_SHORT_NOT_OK) == 0))) { + int retval; + up(&u132->scheduler_lock); + retval = usb_ftdi_elan_edset_empty(u132->platform_dev, + ring->number, endp, urb, address, + endp->usb_endp, 0x3, + u132_hcd_configure_empty_sent); + if (retval == 0) { + } else + u132_hcd_giveback_urb(u132, endp, urb, retval); + return; + } else if (condition_code == TD_CC_STALL) { + up(&u132->scheduler_lock); + dev_warn(&u132->platform_dev->dev, "giving back SETUP I" + "NPUT STALL urb %p\n", urb); + u132_hcd_giveback_urb(u132, endp, urb, + cc_to_error[condition_code]); + return; + } else { + up(&u132->scheduler_lock); + dev_err(&u132->platform_dev->dev, "giving back SETUP IN" + "PUT %s urb %p\n", cc_to_text[condition_code], + urb); + u132_hcd_giveback_urb(u132, endp, urb, + cc_to_error[condition_code]); + return; + } + } else { + dev_err(&u132->platform_dev->dev, "CALLBACK called urb=%p statu" + "s=%d\n", urb, urb->status); + up(&u132->scheduler_lock); + u132_hcd_giveback_urb(u132, endp, urb, urb->status); + return; + } +} + +static void u132_hcd_configure_empty_recv(void *data, struct urb *urb, u8 *buf, + int len, int toggle_bits, int error_count, int condition_code, + int repeat_number, int halted, int skipped, int actual, int non_null) +{ + struct u132_endp *endp = data; + struct u132 *u132 = endp->u132; + down(&u132->scheduler_lock); + if (u132->going > 1) { + dev_err(&u132->platform_dev->dev, "device has been removed %d\n" + , u132->going); + up(&u132->scheduler_lock); + u132_hcd_forget_urb(u132, endp, urb, -ENODEV); + return; + } else if (endp->dequeueing) { + endp->dequeueing = 0; + up(&u132->scheduler_lock); + u132_hcd_giveback_urb(u132, endp, urb, -EINTR); + return; + } else if (u132->going > 0) { + dev_err(&u132->platform_dev->dev, "device is being removed urb=" + "%p status=%d\n", urb, urb->status); + up(&u132->scheduler_lock); + u132_hcd_giveback_urb(u132, endp, urb, -ENODEV); + return; + } else if (urb->status == -EINPROGRESS) { + up(&u132->scheduler_lock); + u132_hcd_giveback_urb(u132, endp, urb, 0); + return; + } else { + dev_err(&u132->platform_dev->dev, "CALLBACK called urb=%p statu" + "s=%d\n", urb, urb->status); + up(&u132->scheduler_lock); + u132_hcd_giveback_urb(u132, endp, urb, urb->status); + return; + } +} + +static void u132_hcd_configure_setup_sent(void *data, struct urb *urb, u8 *buf, + int len, int toggle_bits, int error_count, int condition_code, + int repeat_number, int halted, int skipped, int actual, int non_null) +{ + struct u132_endp *endp = data; + struct u132 *u132 = endp->u132; + u8 address = u132->addr[endp->usb_addr].address; + down(&u132->scheduler_lock); + if (u132->going > 1) { + dev_err(&u132->platform_dev->dev, "device has been removed %d\n" + , u132->going); + up(&u132->scheduler_lock); + u132_hcd_forget_urb(u132, endp, urb, -ENODEV); + return; + } else if (endp->dequeueing) { + endp->dequeueing = 0; + up(&u132->scheduler_lock); + u132_hcd_giveback_urb(u132, endp, urb, -EINTR); + return; + } else if (u132->going > 0) { + dev_err(&u132->platform_dev->dev, "device is being removed urb=" + "%p status=%d\n", urb, urb->status); + up(&u132->scheduler_lock); + u132_hcd_giveback_urb(u132, endp, urb, -ENODEV); + return; + } else if (urb->status == -EINPROGRESS) { + if (usb_pipein(urb->pipe)) { + int retval; + struct u132_ring *ring = endp->ring; + up(&u132->scheduler_lock); + retval = usb_ftdi_elan_edset_input(u132->platform_dev, + ring->number, endp, urb, address, + endp->usb_endp, 0, + u132_hcd_configure_input_recv); + if (retval == 0) { + } else + u132_hcd_giveback_urb(u132, endp, urb, retval); + return; + } else { + int retval; + struct u132_ring *ring = endp->ring; + up(&u132->scheduler_lock); + retval = usb_ftdi_elan_edset_input(u132->platform_dev, + ring->number, endp, urb, address, + endp->usb_endp, 0, + u132_hcd_configure_empty_recv); + if (retval == 0) { + } else + u132_hcd_giveback_urb(u132, endp, urb, retval); + return; + } + } else { + dev_err(&u132->platform_dev->dev, "CALLBACK called urb=%p statu" + "s=%d\n", urb, urb->status); + up(&u132->scheduler_lock); + u132_hcd_giveback_urb(u132, endp, urb, urb->status); + return; + } +} + +static void u132_hcd_enumeration_empty_recv(void *data, struct urb *urb, + u8 *buf, int len, int toggle_bits, int error_count, int condition_code, + int repeat_number, int halted, int skipped, int actual, int non_null) +{ + struct u132_endp *endp = data; + struct u132 *u132 = endp->u132; + u8 address = u132->addr[endp->usb_addr].address; + struct u132_udev *udev = &u132->udev[address]; + down(&u132->scheduler_lock); + if (u132->going > 1) { + dev_err(&u132->platform_dev->dev, "device has been removed %d\n" + , u132->going); + up(&u132->scheduler_lock); + u132_hcd_forget_urb(u132, endp, urb, -ENODEV); + return; + } else if (endp->dequeueing) { + endp->dequeueing = 0; + up(&u132->scheduler_lock); + u132_hcd_giveback_urb(u132, endp, urb, -EINTR); + return; + } else if (u132->going > 0) { + dev_err(&u132->platform_dev->dev, "device is being removed urb=" + "%p status=%d\n", urb, urb->status); + up(&u132->scheduler_lock); + u132_hcd_giveback_urb(u132, endp, urb, -ENODEV); + return; + } else if (urb->status == -EINPROGRESS) { + u132->addr[0].address = 0; + endp->usb_addr = udev->usb_addr; + up(&u132->scheduler_lock); + u132_hcd_giveback_urb(u132, endp, urb, 0); + return; + } else { + dev_err(&u132->platform_dev->dev, "CALLBACK called urb=%p statu" + "s=%d\n", urb, urb->status); + up(&u132->scheduler_lock); + u132_hcd_giveback_urb(u132, endp, urb, urb->status); + return; + } +} + +static void u132_hcd_enumeration_address_sent(void *data, struct urb *urb, + u8 *buf, int len, int toggle_bits, int error_count, int condition_code, + int repeat_number, int halted, int skipped, int actual, int non_null) +{ + struct u132_endp *endp = data; + struct u132 *u132 = endp->u132; + down(&u132->scheduler_lock); + if (u132->going > 1) { + dev_err(&u132->platform_dev->dev, "device has been removed %d\n" + , u132->going); + up(&u132->scheduler_lock); + u132_hcd_forget_urb(u132, endp, urb, -ENODEV); + return; + } else if (endp->dequeueing) { + endp->dequeueing = 0; + up(&u132->scheduler_lock); + u132_hcd_giveback_urb(u132, endp, urb, -EINTR); + return; + } else if (u132->going > 0) { + dev_err(&u132->platform_dev->dev, "device is being removed urb=" + "%p status=%d\n", urb, urb->status); + up(&u132->scheduler_lock); + u132_hcd_giveback_urb(u132, endp, urb, -ENODEV); + return; + } else if (urb->status == -EINPROGRESS) { + int retval; + struct u132_ring *ring = endp->ring; + up(&u132->scheduler_lock); + retval = usb_ftdi_elan_edset_input(u132->platform_dev, + ring->number, endp, urb, 0, endp->usb_endp, 0, + u132_hcd_enumeration_empty_recv); + if (retval == 0) { + } else + u132_hcd_giveback_urb(u132, endp, urb, retval); + return; + } else { + dev_err(&u132->platform_dev->dev, "CALLBACK called urb=%p statu" + "s=%d\n", urb, urb->status); + up(&u132->scheduler_lock); + u132_hcd_giveback_urb(u132, endp, urb, urb->status); + return; + } +} + +static void u132_hcd_initial_empty_sent(void *data, struct urb *urb, u8 *buf, + int len, int toggle_bits, int error_count, int condition_code, + int repeat_number, int halted, int skipped, int actual, int non_null) +{ + struct u132_endp *endp = data; + struct u132 *u132 = endp->u132; + down(&u132->scheduler_lock); + if (u132->going > 1) { + dev_err(&u132->platform_dev->dev, "device has been removed %d\n" + , u132->going); + up(&u132->scheduler_lock); + u132_hcd_forget_urb(u132, endp, urb, -ENODEV); + return; + } else if (endp->dequeueing) { + endp->dequeueing = 0; + up(&u132->scheduler_lock); + u132_hcd_giveback_urb(u132, endp, urb, -EINTR); + return; + } else if (u132->going > 0) { + dev_err(&u132->platform_dev->dev, "device is being removed urb=" + "%p status=%d\n", urb, urb->status); + up(&u132->scheduler_lock); + u132_hcd_giveback_urb(u132, endp, urb, -ENODEV); + return; + } else if (urb->status == -EINPROGRESS) { + up(&u132->scheduler_lock); + u132_hcd_giveback_urb(u132, endp, urb, 0); + return; + } else { + dev_err(&u132->platform_dev->dev, "CALLBACK called urb=%p statu" + "s=%d\n", urb, urb->status); + up(&u132->scheduler_lock); + u132_hcd_giveback_urb(u132, endp, urb, urb->status); + return; + } +} + +static void u132_hcd_initial_input_recv(void *data, struct urb *urb, u8 *buf, + int len, int toggle_bits, int error_count, int condition_code, + int repeat_number, int halted, int skipped, int actual, int non_null) +{ + struct u132_endp *endp = data; + struct u132 *u132 = endp->u132; + u8 address = u132->addr[endp->usb_addr].address; + down(&u132->scheduler_lock); + if (u132->going > 1) { + dev_err(&u132->platform_dev->dev, "device has been removed %d\n" + , u132->going); + up(&u132->scheduler_lock); + u132_hcd_forget_urb(u132, endp, urb, -ENODEV); + return; + } else if (endp->dequeueing) { + endp->dequeueing = 0; + up(&u132->scheduler_lock); + u132_hcd_giveback_urb(u132, endp, urb, -EINTR); + return; + } else if (u132->going > 0) { + dev_err(&u132->platform_dev->dev, "device is being removed urb=" + "%p status=%d\n", urb, urb->status); + up(&u132->scheduler_lock); + u132_hcd_giveback_urb(u132, endp, urb, -ENODEV); + return; + } else if (urb->status == -EINPROGRESS) { + int retval; + struct u132_ring *ring = endp->ring; + u8 *u = urb->transfer_buffer; + u8 *b = buf; + int L = len; + while (L-- > 0) { + *u++ = *b++; + } + urb->actual_length = len; + up(&u132->scheduler_lock); + retval = usb_ftdi_elan_edset_empty(u132->platform_dev, + ring->number, endp, urb, address, endp->usb_endp, 0x3, + u132_hcd_initial_empty_sent); + if (retval == 0) { + } else + u132_hcd_giveback_urb(u132, endp, urb, retval); + return; + } else { + dev_err(&u132->platform_dev->dev, "CALLBACK called urb=%p statu" + "s=%d\n", urb, urb->status); + up(&u132->scheduler_lock); + u132_hcd_giveback_urb(u132, endp, urb, urb->status); + return; + } +} + +static void u132_hcd_initial_setup_sent(void *data, struct urb *urb, u8 *buf, + int len, int toggle_bits, int error_count, int condition_code, + int repeat_number, int halted, int skipped, int actual, int non_null) +{ + struct u132_endp *endp = data; + struct u132 *u132 = endp->u132; + u8 address = u132->addr[endp->usb_addr].address; + down(&u132->scheduler_lock); + if (u132->going > 1) { + dev_err(&u132->platform_dev->dev, "device has been removed %d\n" + , u132->going); + up(&u132->scheduler_lock); + u132_hcd_forget_urb(u132, endp, urb, -ENODEV); + return; + } else if (endp->dequeueing) { + endp->dequeueing = 0; + up(&u132->scheduler_lock); + u132_hcd_giveback_urb(u132, endp, urb, -EINTR); + return; + } else if (u132->going > 0) { + dev_err(&u132->platform_dev->dev, "device is being removed urb=" + "%p status=%d\n", urb, urb->status); + up(&u132->scheduler_lock); + u132_hcd_giveback_urb(u132, endp, urb, -ENODEV); + return; + } else if (urb->status == -EINPROGRESS) { + int retval; + struct u132_ring *ring = endp->ring; + up(&u132->scheduler_lock); + retval = usb_ftdi_elan_edset_input(u132->platform_dev, + ring->number, endp, urb, address, endp->usb_endp, 0, + u132_hcd_initial_input_recv); + if (retval == 0) { + } else + u132_hcd_giveback_urb(u132, endp, urb, retval); + return; + } else { + dev_err(&u132->platform_dev->dev, "CALLBACK called urb=%p statu" + "s=%d\n", urb, urb->status); + up(&u132->scheduler_lock); + u132_hcd_giveback_urb(u132, endp, urb, urb->status); + return; + } +} + +static void u132_hcd_ring_work_scheduler(void *data); +static void u132_hcd_endp_work_scheduler(void *data); +/* +* this work function is only executed from the work queue +* +*/ +static void u132_hcd_ring_work_scheduler(void *data) +{ + struct u132_ring *ring = data; + struct u132 *u132 = ring->u132; + down(&u132->scheduler_lock); + if (ring->in_use) { + up(&u132->scheduler_lock); + u132_ring_put_kref(u132, ring); + return; + } else if (ring->curr_endp) { + struct u132_endp *last_endp = ring->curr_endp; + struct list_head *scan; + struct list_head *head = &last_endp->endp_ring; + unsigned long wakeup = 0; + list_for_each(scan, head) { + struct u132_endp *endp = list_entry(scan, + struct u132_endp, endp_ring); + if (endp->queue_next == endp->queue_last) { + } else if ((endp->delayed == 0) + || time_after_eq(jiffies, endp->jiffies)) { + ring->curr_endp = endp; + u132_endp_cancel_work(u132, last_endp); + u132_endp_queue_work(u132, last_endp, 0); + up(&u132->scheduler_lock); + u132_ring_put_kref(u132, ring); + return; + } else { + unsigned long delta = endp->jiffies - jiffies; + if (delta > wakeup) + wakeup = delta; + } + } + if (last_endp->queue_next == last_endp->queue_last) { + } else if ((last_endp->delayed == 0) || time_after_eq(jiffies, + last_endp->jiffies)) { + u132_endp_cancel_work(u132, last_endp); + u132_endp_queue_work(u132, last_endp, 0); + up(&u132->scheduler_lock); + u132_ring_put_kref(u132, ring); + return; + } else { + unsigned long delta = last_endp->jiffies - jiffies; + if (delta > wakeup) + wakeup = delta; + } + if (wakeup > 0) { + u132_ring_requeue_work(u132, ring, wakeup); + up(&u132->scheduler_lock); + return; + } else { + up(&u132->scheduler_lock); + u132_ring_put_kref(u132, ring); + return; + } + } else { + up(&u132->scheduler_lock); + u132_ring_put_kref(u132, ring); + return; + } +} + +static void u132_hcd_endp_work_scheduler(void *data) +{ + struct u132_ring *ring; + struct u132_endp *endp = data; + struct u132 *u132 = endp->u132; + down(&u132->scheduler_lock); + ring = endp->ring; + if (endp->edset_flush) { + endp->edset_flush = 0; + if (endp->dequeueing) + usb_ftdi_elan_edset_flush(u132->platform_dev, + ring->number, endp); + up(&u132->scheduler_lock); + u132_endp_put_kref(u132, endp); + return; + } else if (endp->active) { + up(&u132->scheduler_lock); + u132_endp_put_kref(u132, endp); + return; + } else if (ring->in_use) { + up(&u132->scheduler_lock); + u132_endp_put_kref(u132, endp); + return; + } else if (endp->queue_next == endp->queue_last) { + up(&u132->scheduler_lock); + u132_endp_put_kref(u132, endp); + return; + } else if (endp->pipetype == PIPE_INTERRUPT) { + u8 address = u132->addr[endp->usb_addr].address; + if (ring->in_use) { + up(&u132->scheduler_lock); + u132_endp_put_kref(u132, endp); + return; + } else { + int retval; + struct urb *urb = endp->urb_list[ENDP_QUEUE_MASK & + endp->queue_next]; + endp->active = 1; + ring->curr_endp = endp; + ring->in_use = 1; + up(&u132->scheduler_lock); + retval = edset_single(u132, ring, endp, urb, address, + endp->toggle_bits, u132_hcd_interrupt_recv); + if (retval == 0) { + } else + u132_hcd_giveback_urb(u132, endp, urb, retval); + return; + } + } else if (endp->pipetype == PIPE_CONTROL) { + u8 address = u132->addr[endp->usb_addr].address; + if (ring->in_use) { + up(&u132->scheduler_lock); + u132_endp_put_kref(u132, endp); + return; + } else if (address == 0) { + int retval; + struct urb *urb = endp->urb_list[ENDP_QUEUE_MASK & + endp->queue_next]; + endp->active = 1; + ring->curr_endp = endp; + ring->in_use = 1; + up(&u132->scheduler_lock); + retval = edset_setup(u132, ring, endp, urb, address, + 0x2, u132_hcd_initial_setup_sent); + if (retval == 0) { + } else + u132_hcd_giveback_urb(u132, endp, urb, retval); + return; + } else if (endp->usb_addr == 0) { + int retval; + struct urb *urb = endp->urb_list[ENDP_QUEUE_MASK & + endp->queue_next]; + endp->active = 1; + ring->curr_endp = endp; + ring->in_use = 1; + up(&u132->scheduler_lock); + retval = edset_setup(u132, ring, endp, urb, 0, 0x2, + u132_hcd_enumeration_address_sent); + if (retval == 0) { + } else + u132_hcd_giveback_urb(u132, endp, urb, retval); + return; + } else { + int retval; + u8 address = u132->addr[endp->usb_addr].address; + struct urb *urb = endp->urb_list[ENDP_QUEUE_MASK & + endp->queue_next]; + endp->active = 1; + ring->curr_endp = endp; + ring->in_use = 1; + up(&u132->scheduler_lock); + retval = edset_setup(u132, ring, endp, urb, address, + 0x2, u132_hcd_configure_setup_sent); + if (retval == 0) { + } else + u132_hcd_giveback_urb(u132, endp, urb, retval); + return; + } + } else { + if (endp->input) { + u8 address = u132->addr[endp->usb_addr].address; + if (ring->in_use) { + up(&u132->scheduler_lock); + u132_endp_put_kref(u132, endp); + return; + } else { + int retval; + struct urb *urb = endp->urb_list[ + ENDP_QUEUE_MASK & endp->queue_next]; + endp->active = 1; + ring->curr_endp = endp; + ring->in_use = 1; + up(&u132->scheduler_lock); + retval = edset_input(u132, ring, endp, urb, + address, endp->toggle_bits, + u132_hcd_bulk_input_recv); + if (retval == 0) { + } else + u132_hcd_giveback_urb(u132, endp, urb, + retval); + return; + } + } else { /* output pipe */ + u8 address = u132->addr[endp->usb_addr].address; + if (ring->in_use) { + up(&u132->scheduler_lock); + u132_endp_put_kref(u132, endp); + return; + } else { + int retval; + struct urb *urb = endp->urb_list[ + ENDP_QUEUE_MASK & endp->queue_next]; + endp->active = 1; + ring->curr_endp = endp; + ring->in_use = 1; + up(&u132->scheduler_lock); + retval = edset_output(u132, ring, endp, urb, + address, endp->toggle_bits, + u132_hcd_bulk_output_sent); + if (retval == 0) { + } else + u132_hcd_giveback_urb(u132, endp, urb, + retval); + return; + } + } + } +} + +static void port_power(struct u132 *u132, int pn, int is_on) +{ + u132->port[pn].power = is_on; +} + +static void u132_power(struct u132 *u132, int is_on) +{ + struct usb_hcd *hcd = u132_to_hcd(u132) + ; /* hub is inactive unless the port is powered */ + if (is_on) { + if (u132->power) + return; + u132->power = 1; + hcd->self.controller->power.power_state = PMSG_ON; + } else { + u132->power = 0; + hcd->state = HC_STATE_HALT; + hcd->self.controller->power.power_state = PMSG_SUSPEND; + } +} + +static int u132_periodic_reinit(struct u132 *u132) +{ + int retval; + u32 fi = u132->hc_fminterval & 0x03fff; + u32 fit; + u32 fminterval; + retval = u132_read_pcimem(u132, fminterval, &fminterval); + if (retval) + return retval; + fit = fminterval & FIT; + retval = u132_write_pcimem(u132, fminterval, + (fit ^ FIT) | u132->hc_fminterval); + if (retval) + return retval; + retval = u132_write_pcimem(u132, periodicstart, + ((9 *fi) / 10) & 0x3fff); + if (retval) + return retval; + return 0; +} + +static char *hcfs2string(int state) +{ + switch (state) { + case OHCI_USB_RESET: + return "reset"; + case OHCI_USB_RESUME: + return "resume"; + case OHCI_USB_OPER: + return "operational"; + case OHCI_USB_SUSPEND: + return "suspend"; + } + return "?"; +} + +static int u132_usb_reset(struct u132 *u132) +{ + int retval; + retval = u132_read_pcimem(u132, control, &u132->hc_control); + if (retval) + return retval; + u132->hc_control &= OHCI_CTRL_RWC; + retval = u132_write_pcimem(u132, control, u132->hc_control); + if (retval) + return retval; + return 0; +} + +static int u132_init(struct u132 *u132) +{ + int retval; + u32 control; + u132_disable(u132); + u132->next_statechange = + jiffies; /* SMM owns the HC? not for long! */ { + u32 control; + retval = u132_read_pcimem(u132, control, &control); + if (retval) + return retval; + if (control & OHCI_CTRL_IR) { + u32 temp = 50; + retval = u132_write_pcimem(u132, intrenable, + OHCI_INTR_OC); + if (retval) + return retval; + retval = u132_write_pcimem_byte(u132, cmdstatus, + OHCI_OCR); + if (retval) + return retval; + check:{ + retval = u132_read_pcimem(u132, control, + &control); + if (retval) + return retval; + } + if (control & OHCI_CTRL_IR) { + msleep(10); + if (--temp == 0) { + dev_err(&u132->platform_dev->dev, "USB " + "HC takeover failed!(BIOS/SMM b" + "ug) control=%08X\n", control); + return -EBUSY; + } + goto check; + } + u132_usb_reset(u132); + } + } + retval = u132_write_pcimem(u132, intrdisable, OHCI_INTR_MIE); + if (retval) + return retval; + retval = u132_read_pcimem(u132, control, &control); + if (retval) + return retval; + if (u132->num_ports == 0) { + u32 rh_a = -1; + retval = u132_read_pcimem(u132, roothub.a, &rh_a); + if (retval) + return retval; + u132->num_ports = rh_a & RH_A_NDP; + retval = read_roothub_info(u132); + if (retval) + return retval; + } + if (u132->num_ports > MAX_U132_PORTS) { + return -EINVAL; + } + return 0; +} + + +/* Start an OHCI controller, set the BUS operational +* resets USB and controller +* enable interrupts +*/ +static int u132_run(struct u132 *u132) +{ + int retval; + u32 control; + u32 status; + u32 fminterval; + u32 periodicstart; + u32 cmdstatus; + u32 roothub_a; + int mask = OHCI_INTR_INIT; + int first = u132->hc_fminterval == 0; + int sleep_time = 0; + int reset_timeout = 30; /* ... allow extra time */ + u132_disable(u132); + if (first) { + u32 temp; + retval = u132_read_pcimem(u132, fminterval, &temp); + if (retval) + return retval; + u132->hc_fminterval = temp & 0x3fff; + if (u132->hc_fminterval != FI) { + } + u132->hc_fminterval |= FSMP(u132->hc_fminterval) << 16; + } + retval = u132_read_pcimem(u132, control, &u132->hc_control); + if (retval) + return retval; + dev_info(&u132->platform_dev->dev, "resetting from state '%s', control " + "= %08X\n", hcfs2string(u132->hc_control & OHCI_CTRL_HCFS), + u132->hc_control); + switch (u132->hc_control & OHCI_CTRL_HCFS) { + case OHCI_USB_OPER: + sleep_time = 0; + break; + case OHCI_USB_SUSPEND: + case OHCI_USB_RESUME: + u132->hc_control &= OHCI_CTRL_RWC; + u132->hc_control |= OHCI_USB_RESUME; + sleep_time = 10; + break; + default: + u132->hc_control &= OHCI_CTRL_RWC; + u132->hc_control |= OHCI_USB_RESET; + sleep_time = 50; + break; + } + retval = u132_write_pcimem(u132, control, u132->hc_control); + if (retval) + return retval; + retval = u132_read_pcimem(u132, control, &control); + if (retval) + return retval; + msleep(sleep_time); + retval = u132_read_pcimem(u132, roothub.a, &roothub_a); + if (retval) + return retval; + if (!(roothub_a & RH_A_NPS)) { + int temp; /* power down each port */ + for (temp = 0; temp < u132->num_ports; temp++) { + retval = u132_write_pcimem(u132, + roothub.portstatus[temp], RH_PS_LSDA); + if (retval) + return retval; + } + } + retval = u132_read_pcimem(u132, control, &control); + if (retval) + return retval; + retry:retval = u132_read_pcimem(u132, cmdstatus, &status); + if (retval) + return retval; + retval = u132_write_pcimem_byte(u132, cmdstatus, OHCI_HCR); + if (retval) + return retval; + extra:{ + retval = u132_read_pcimem(u132, cmdstatus, &status); + if (retval) + return retval; + if (0 != (status & OHCI_HCR)) { + if (--reset_timeout == 0) { + dev_err(&u132->platform_dev->dev, "USB HC reset" + " timed out!\n"); + return -ENODEV; + } else { + msleep(5); + goto extra; + } + } + } + if (u132->flags & OHCI_QUIRK_INITRESET) { + retval = u132_write_pcimem(u132, control, u132->hc_control); + if (retval) + return retval; + retval = u132_read_pcimem(u132, control, &control); + if (retval) + return retval; + } + retval = u132_write_pcimem(u132, ed_controlhead, 0x00000000); + if (retval) + return retval; + retval = u132_write_pcimem(u132, ed_bulkhead, 0x11000000); + if (retval) + return retval; + retval = u132_write_pcimem(u132, hcca, 0x00000000); + if (retval) + return retval; + retval = u132_periodic_reinit(u132); + if (retval) + return retval; + retval = u132_read_pcimem(u132, fminterval, &fminterval); + if (retval) + return retval; + retval = u132_read_pcimem(u132, periodicstart, &periodicstart); + if (retval) + return retval; + if (0 == (fminterval & 0x3fff0000) || 0 == periodicstart) { + if (!(u132->flags & OHCI_QUIRK_INITRESET)) { + u132->flags |= OHCI_QUIRK_INITRESET; + goto retry; + } else + dev_err(&u132->platform_dev->dev, "init err(%08x %04x)" + "\n", fminterval, periodicstart); + } /* start controller operations */ + u132->hc_control &= OHCI_CTRL_RWC; + u132->hc_control |= OHCI_CONTROL_INIT | OHCI_CTRL_BLE | OHCI_USB_OPER; + retval = u132_write_pcimem(u132, control, u132->hc_control); + if (retval) + return retval; + retval = u132_write_pcimem_byte(u132, cmdstatus, OHCI_BLF); + if (retval) + return retval; + retval = u132_read_pcimem(u132, cmdstatus, &cmdstatus); + if (retval) + return retval; + retval = u132_read_pcimem(u132, control, &control); + if (retval) + return retval; + u132_to_hcd(u132)->state = HC_STATE_RUNNING; + retval = u132_write_pcimem(u132, roothub.status, RH_HS_DRWE); + if (retval) + return retval; + retval = u132_write_pcimem(u132, intrstatus, mask); + if (retval) + return retval; + retval = u132_write_pcimem(u132, intrdisable, + OHCI_INTR_MIE | OHCI_INTR_OC | OHCI_INTR_RHSC | OHCI_INTR_FNO | + OHCI_INTR_UE | OHCI_INTR_RD | OHCI_INTR_SF | OHCI_INTR_WDH | + OHCI_INTR_SO); + if (retval) + return retval; /* handle root hub init quirks ... */ + retval = u132_read_pcimem(u132, roothub.a, &roothub_a); + if (retval) + return retval; + roothub_a &= ~(RH_A_PSM | RH_A_OCPM); + if (u132->flags & OHCI_QUIRK_SUPERIO) { + roothub_a |= RH_A_NOCP; + roothub_a &= ~(RH_A_POTPGT | RH_A_NPS); + retval = u132_write_pcimem(u132, roothub.a, roothub_a); + if (retval) + return retval; + } else if ((u132->flags & OHCI_QUIRK_AMD756) || distrust_firmware) { + roothub_a |= RH_A_NPS; + retval = u132_write_pcimem(u132, roothub.a, roothub_a); + if (retval) + return retval; + } + retval = u132_write_pcimem(u132, roothub.status, RH_HS_LPSC); + if (retval) + return retval; + retval = u132_write_pcimem(u132, roothub.b, + (roothub_a & RH_A_NPS) ? 0 : RH_B_PPCM); + if (retval) + return retval; + retval = u132_read_pcimem(u132, control, &control); + if (retval) + return retval; + mdelay((roothub_a >> 23) & 0x1fe); + u132_to_hcd(u132)->state = HC_STATE_RUNNING; + return 0; +} + +static void u132_hcd_stop(struct usb_hcd *hcd) +{ + struct u132 *u132 = hcd_to_u132(hcd); + if (u132->going > 1) { + dev_err(&u132->platform_dev->dev, "device has been removed %d\n" + , u132->going); + } else if (u132->going > 0) { + dev_err(&u132->platform_dev->dev, "device hcd=%p is being remov" + "ed\n", hcd); + } else { + down(&u132->sw_lock); + msleep(100); + u132_power(u132, 0); + up(&u132->sw_lock); + } +} + +static int u132_hcd_start(struct usb_hcd *hcd) +{ + struct u132 *u132 = hcd_to_u132(hcd); + if (u132->going > 1) { + dev_err(&u132->platform_dev->dev, "device has been removed %d\n" + , u132->going); + return -ENODEV; + } else if (u132->going > 0) { + dev_err(&u132->platform_dev->dev, "device is being removed\n"); + return -ESHUTDOWN; + } else if (hcd->self.controller) { + int retval; + struct platform_device *pdev = + to_platform_device(hcd->self.controller); + u16 vendor = ((struct u132_platform_data *) + (pdev->dev.platform_data))->vendor; + u16 device = ((struct u132_platform_data *) + (pdev->dev.platform_data))->device; + down(&u132->sw_lock); + msleep(10); + if (vendor == PCI_VENDOR_ID_AMD && device == 0x740c) { + u132->flags = OHCI_QUIRK_AMD756; + } else if (vendor == PCI_VENDOR_ID_OPTI && device == 0xc861) { + dev_err(&u132->platform_dev->dev, "WARNING: OPTi workar" + "ounds unavailable\n"); + } else if (vendor == PCI_VENDOR_ID_COMPAQ && device == 0xa0f8) + u132->flags |= OHCI_QUIRK_ZFMICRO; + retval = u132_run(u132); + if (retval) { + u132_disable(u132); + u132->going = 1; + } + msleep(100); + up(&u132->sw_lock); + return retval; + } else { + dev_err(&u132->platform_dev->dev, "platform_device missing\n"); + return -ENODEV; + } +} + +static int u132_hcd_reset(struct usb_hcd *hcd) +{ + struct u132 *u132 = hcd_to_u132(hcd); + if (u132->going > 1) { + dev_err(&u132->platform_dev->dev, "device has been removed %d\n" + , u132->going); + return -ENODEV; + } else if (u132->going > 0) { + dev_err(&u132->platform_dev->dev, "device is being removed\n"); + return -ESHUTDOWN; + } else { + int retval; + down(&u132->sw_lock); + retval = u132_init(u132); + if (retval) { + u132_disable(u132); + u132->going = 1; + } + up(&u132->sw_lock); + return retval; + } +} + +static int create_endpoint_and_queue_int(struct u132 *u132, + struct u132_udev *udev, struct usb_host_endpoint *hep, struct urb *urb, + struct usb_device *usb_dev, u8 usb_addr, u8 usb_endp, u8 address, + gfp_t mem_flags) +{ + struct u132_ring *ring; + unsigned long irqs; + u8 endp_number = ++u132->num_endpoints; + struct u132_endp *endp = hep->hcpriv = u132->endp[endp_number - 1] = + kmalloc(sizeof(struct u132_endp), mem_flags); + if (!endp) { + return -ENOMEM; + } + INIT_WORK(&endp->scheduler, u132_hcd_endp_work_scheduler, (void *)endp); + spin_lock_init(&endp->queue_lock.slock); + INIT_LIST_HEAD(&endp->urb_more); + ring = endp->ring = &u132->ring[0]; + if (ring->curr_endp) { + list_add_tail(&endp->endp_ring, &ring->curr_endp->endp_ring); + } else { + INIT_LIST_HEAD(&endp->endp_ring); + ring->curr_endp = endp; + } + ring->length += 1; + endp->dequeueing = 0; + endp->edset_flush = 0; + endp->active = 0; + endp->delayed = 0; + endp->endp_number = endp_number; + endp->u132 = u132; + endp->hep = hep; + endp->pipetype = usb_pipetype(urb->pipe); + u132_endp_init_kref(u132, endp); + if (usb_pipein(urb->pipe)) { + endp->toggle_bits = 0x2; + usb_settoggle(udev->usb_device, usb_endp, 0, 0); + endp->input = 1; + endp->output = 0; + udev->endp_number_in[usb_endp] = endp_number; + u132_udev_get_kref(u132, udev); + } else { + endp->toggle_bits = 0x2; + usb_settoggle(udev->usb_device, usb_endp, 1, 0); + endp->input = 0; + endp->output = 1; + udev->endp_number_out[usb_endp] = endp_number; + u132_udev_get_kref(u132, udev); + } + urb->hcpriv = u132; + spin_lock_irqsave(&endp->queue_lock.slock, irqs); + endp->delayed = 1; + endp->jiffies = jiffies + msecs_to_jiffies(urb->interval); + endp->udev_number = address; + endp->usb_addr = usb_addr; + endp->usb_endp = usb_endp; + endp->queue_size = 1; + endp->queue_last = 0; + endp->queue_next = 0; + endp->urb_list[ENDP_QUEUE_MASK & endp->queue_last++] = urb; + spin_unlock_irqrestore(&endp->queue_lock.slock, irqs); + u132_endp_queue_work(u132, endp, msecs_to_jiffies(urb->interval)); + return 0; +} + +static int queue_int_on_old_endpoint(struct u132 *u132, struct u132_udev *udev, + struct usb_host_endpoint *hep, struct urb *urb, + struct usb_device *usb_dev, struct u132_endp *endp, u8 usb_addr, + u8 usb_endp, u8 address) +{ + urb->hcpriv = u132; + endp->delayed = 1; + endp->jiffies = jiffies + msecs_to_jiffies(urb->interval); + if (endp->queue_size++ < ENDP_QUEUE_SIZE) { + endp->urb_list[ENDP_QUEUE_MASK & endp->queue_last++] = urb; + } else { + struct u132_urbq *urbq = kmalloc(sizeof(struct u132_urbq), + GFP_ATOMIC); + if (urbq == NULL) { + endp->queue_size -= 1; + return -ENOMEM; + } else { + list_add_tail(&urbq->urb_more, &endp->urb_more); + urbq->urb = urb; + } + } + return 0; +} + +static int create_endpoint_and_queue_bulk(struct u132 *u132, + struct u132_udev *udev, struct usb_host_endpoint *hep, struct urb *urb, + struct usb_device *usb_dev, u8 usb_addr, u8 usb_endp, u8 address, + gfp_t mem_flags) +{ + int ring_number; + struct u132_ring *ring; + unsigned long irqs; + u8 endp_number = ++u132->num_endpoints; + struct u132_endp *endp = hep->hcpriv = u132->endp[endp_number - 1] = + kmalloc(sizeof(struct u132_endp), mem_flags); + if (!endp) { + return -ENOMEM; + } + INIT_WORK(&endp->scheduler, u132_hcd_endp_work_scheduler, (void *)endp); + spin_lock_init(&endp->queue_lock.slock); + INIT_LIST_HEAD(&endp->urb_more); + endp->dequeueing = 0; + endp->edset_flush = 0; + endp->active = 0; + endp->delayed = 0; + endp->endp_number = endp_number; + endp->u132 = u132; + endp->hep = hep; + endp->pipetype = usb_pipetype(urb->pipe); + u132_endp_init_kref(u132, endp); + if (usb_pipein(urb->pipe)) { + endp->toggle_bits = 0x2; + usb_settoggle(udev->usb_device, usb_endp, 0, 0); + ring_number = 3; + endp->input = 1; + endp->output = 0; + udev->endp_number_in[usb_endp] = endp_number; + u132_udev_get_kref(u132, udev); + } else { + endp->toggle_bits = 0x2; + usb_settoggle(udev->usb_device, usb_endp, 1, 0); + ring_number = 2; + endp->input = 0; + endp->output = 1; + udev->endp_number_out[usb_endp] = endp_number; + u132_udev_get_kref(u132, udev); + } + ring = endp->ring = &u132->ring[ring_number - 1]; + if (ring->curr_endp) { + list_add_tail(&endp->endp_ring, &ring->curr_endp->endp_ring); + } else { + INIT_LIST_HEAD(&endp->endp_ring); + ring->curr_endp = endp; + } + ring->length += 1; + urb->hcpriv = u132; + spin_lock_irqsave(&endp->queue_lock.slock, irqs); + endp->udev_number = address; + endp->usb_addr = usb_addr; + endp->usb_endp = usb_endp; + endp->queue_size = 1; + endp->queue_last = 0; + endp->queue_next = 0; + endp->urb_list[ENDP_QUEUE_MASK & endp->queue_last++] = urb; + spin_unlock_irqrestore(&endp->queue_lock.slock, irqs); + u132_endp_queue_work(u132, endp, 0); + return 0; +} + +static int queue_bulk_on_old_endpoint(struct u132 *u132, struct u132_udev *udev, + struct usb_host_endpoint *hep, struct urb *urb, + struct usb_device *usb_dev, struct u132_endp *endp, u8 usb_addr, + u8 usb_endp, u8 address) +{ + urb->hcpriv = u132; + if (endp->queue_size++ < ENDP_QUEUE_SIZE) { + endp->urb_list[ENDP_QUEUE_MASK & endp->queue_last++] = urb; + } else { + struct u132_urbq *urbq = kmalloc(sizeof(struct u132_urbq), + GFP_ATOMIC); + if (urbq == NULL) { + endp->queue_size -= 1; + return -ENOMEM; + } else { + list_add_tail(&urbq->urb_more, &endp->urb_more); + urbq->urb = urb; + } + } + return 0; +} + +static int create_endpoint_and_queue_control(struct u132 *u132, + struct usb_host_endpoint *hep, struct urb *urb, + struct usb_device *usb_dev, u8 usb_addr, u8 usb_endp, + gfp_t mem_flags) +{ + struct u132_ring *ring; + u8 endp_number = ++u132->num_endpoints; + struct u132_endp *endp = hep->hcpriv = u132->endp[endp_number - 1] = + kmalloc(sizeof(struct u132_endp), mem_flags); + if (!endp) { + return -ENOMEM; + } + INIT_WORK(&endp->scheduler, u132_hcd_endp_work_scheduler, (void *)endp); + spin_lock_init(&endp->queue_lock.slock); + INIT_LIST_HEAD(&endp->urb_more); + ring = endp->ring = &u132->ring[0]; + if (ring->curr_endp) { + list_add_tail(&endp->endp_ring, &ring->curr_endp->endp_ring); + } else { + INIT_LIST_HEAD(&endp->endp_ring); + ring->curr_endp = endp; + } + ring->length += 1; + endp->dequeueing = 0; + endp->edset_flush = 0; + endp->active = 0; + endp->delayed = 0; + endp->endp_number = endp_number; + endp->u132 = u132; + endp->hep = hep; + u132_endp_init_kref(u132, endp); + u132_endp_get_kref(u132, endp); + if (usb_addr == 0) { + unsigned long irqs; + u8 address = u132->addr[usb_addr].address; + struct u132_udev *udev = &u132->udev[address]; + endp->udev_number = address; + endp->usb_addr = usb_addr; + endp->usb_endp = usb_endp; + endp->input = 1; + endp->output = 1; + endp->pipetype = usb_pipetype(urb->pipe); + u132_udev_init_kref(u132, udev); + u132_udev_get_kref(u132, udev); + udev->endp_number_in[usb_endp] = endp_number; + udev->endp_number_out[usb_endp] = endp_number; + urb->hcpriv = u132; + spin_lock_irqsave(&endp->queue_lock.slock, irqs); + endp->queue_size = 1; + endp->queue_last = 0; + endp->queue_next = 0; + endp->urb_list[ENDP_QUEUE_MASK & endp->queue_last++] = urb; + spin_unlock_irqrestore(&endp->queue_lock.slock, irqs); + u132_endp_queue_work(u132, endp, 0); + return 0; + } else { /*(usb_addr > 0) */ + unsigned long irqs; + u8 address = u132->addr[usb_addr].address; + struct u132_udev *udev = &u132->udev[address]; + endp->udev_number = address; + endp->usb_addr = usb_addr; + endp->usb_endp = usb_endp; + endp->input = 1; + endp->output = 1; + endp->pipetype = usb_pipetype(urb->pipe); + u132_udev_get_kref(u132, udev); + udev->enumeration = 2; + udev->endp_number_in[usb_endp] = endp_number; + udev->endp_number_out[usb_endp] = endp_number; + urb->hcpriv = u132; + spin_lock_irqsave(&endp->queue_lock.slock, irqs); + endp->queue_size = 1; + endp->queue_last = 0; + endp->queue_next = 0; + endp->urb_list[ENDP_QUEUE_MASK & endp->queue_last++] = urb; + spin_unlock_irqrestore(&endp->queue_lock.slock, irqs); + u132_endp_queue_work(u132, endp, 0); + return 0; + } +} + +static int queue_control_on_old_endpoint(struct u132 *u132, + struct usb_host_endpoint *hep, struct urb *urb, + struct usb_device *usb_dev, struct u132_endp *endp, u8 usb_addr, + u8 usb_endp) +{ + if (usb_addr == 0) { + if (usb_pipein(urb->pipe)) { + urb->hcpriv = u132; + if (endp->queue_size++ < ENDP_QUEUE_SIZE) { + endp->urb_list[ENDP_QUEUE_MASK & + endp->queue_last++] = urb; + } else { + struct u132_urbq *urbq = + kmalloc(sizeof(struct u132_urbq), + GFP_ATOMIC); + if (urbq == NULL) { + endp->queue_size -= 1; + return -ENOMEM; + } else { + list_add_tail(&urbq->urb_more, + &endp->urb_more); + urbq->urb = urb; + } + } + return 0; + } else { /* usb_pipeout(urb->pipe) */ + struct u132_addr *addr = &u132->addr[usb_dev->devnum]; + int I = MAX_U132_UDEVS; + int i = 0; + while (--I > 0) { + struct u132_udev *udev = &u132->udev[++i]; + if (udev->usb_device) { + continue; + } else { + udev->enumeration = 1; + u132->addr[0].address = i; + endp->udev_number = i; + udev->udev_number = i; + udev->usb_addr = usb_dev->devnum; + u132_udev_init_kref(u132, udev); + udev->endp_number_in[usb_endp] = + endp->endp_number; + u132_udev_get_kref(u132, udev); + udev->endp_number_out[usb_endp] = + endp->endp_number; + udev->usb_device = usb_dev; + ((u8 *) (urb->setup_packet))[2] = + addr->address = i; + u132_udev_get_kref(u132, udev); + break; + } + } + if (I == 0) { + dev_err(&u132->platform_dev->dev, "run out of d" + "evice space\n"); + return -EINVAL; + } + urb->hcpriv = u132; + if (endp->queue_size++ < ENDP_QUEUE_SIZE) { + endp->urb_list[ENDP_QUEUE_MASK & + endp->queue_last++] = urb; + } else { + struct u132_urbq *urbq = + kmalloc(sizeof(struct u132_urbq), + GFP_ATOMIC); + if (urbq == NULL) { + endp->queue_size -= 1; + return -ENOMEM; + } else { + list_add_tail(&urbq->urb_more, + &endp->urb_more); + urbq->urb = urb; + } + } + return 0; + } + } else { /*(usb_addr > 0) */ + u8 address = u132->addr[usb_addr].address; + struct u132_udev *udev = &u132->udev[address]; + urb->hcpriv = u132; + if (udev->enumeration == 2) { + } else + udev->enumeration = 2; + if (endp->queue_size++ < ENDP_QUEUE_SIZE) { + endp->urb_list[ENDP_QUEUE_MASK & endp->queue_last++] = + urb; + } else { + struct u132_urbq *urbq = + kmalloc(sizeof(struct u132_urbq), GFP_ATOMIC); + if (urbq == NULL) { + endp->queue_size -= 1; + return -ENOMEM; + } else { + list_add_tail(&urbq->urb_more, &endp->urb_more); + urbq->urb = urb; + } + } + return 0; + } +} + +static int u132_urb_enqueue(struct usb_hcd *hcd, struct usb_host_endpoint *hep, + struct urb *urb, gfp_t mem_flags) +{ + struct u132 *u132 = hcd_to_u132(hcd); + if (irqs_disabled()) { + if (__GFP_WAIT & mem_flags) { + printk(KERN_ERR "invalid context for function that migh" + "t sleep\n"); + return -EINVAL; + } + } + if (u132->going > 1) { + dev_err(&u132->platform_dev->dev, "device has been removed %d\n" + , u132->going); + return -ENODEV; + } else if (u132->going > 0) { + dev_err(&u132->platform_dev->dev, "device is being removed urb=" + "%p status=%d\n", urb, urb->status); + return -ESHUTDOWN; + } else { + u8 usb_addr = usb_pipedevice(urb->pipe); + u8 usb_endp = usb_pipeendpoint(urb->pipe); + struct usb_device *usb_dev = urb->dev; + if (usb_pipetype(urb->pipe) == PIPE_INTERRUPT) { + u8 address = u132->addr[usb_addr].address; + struct u132_udev *udev = &u132->udev[address]; + struct u132_endp *endp = hep->hcpriv; + urb->actual_length = 0; + if (endp) { + unsigned long irqs; + int retval; + spin_lock_irqsave(&endp->queue_lock.slock, + irqs); + retval = queue_int_on_old_endpoint(u132, udev, + hep, urb, usb_dev, endp, usb_addr, + usb_endp, address); + spin_unlock_irqrestore(&endp->queue_lock.slock, + irqs); + if (retval) { + return retval; + } else { + u132_endp_queue_work(u132, endp, + msecs_to_jiffies(urb->interval)) + ; + return 0; + } + } else if (u132->num_endpoints == MAX_U132_ENDPS) { + return -EINVAL; + } else { /*(endp == NULL) */ + return create_endpoint_and_queue_int(u132, udev, + hep, urb, usb_dev, usb_addr, usb_endp, + address, mem_flags); + } + } else if (usb_pipetype(urb->pipe) == PIPE_ISOCHRONOUS) { + dev_err(&u132->platform_dev->dev, "the hardware does no" + "t support PIPE_ISOCHRONOUS\n"); + return -EINVAL; + } else if (usb_pipetype(urb->pipe) == PIPE_BULK) { + u8 address = u132->addr[usb_addr].address; + struct u132_udev *udev = &u132->udev[address]; + struct u132_endp *endp = hep->hcpriv; + urb->actual_length = 0; + if (endp) { + unsigned long irqs; + int retval; + spin_lock_irqsave(&endp->queue_lock.slock, + irqs); + retval = queue_bulk_on_old_endpoint(u132, udev, + hep, urb, usb_dev, endp, usb_addr, + usb_endp, address); + spin_unlock_irqrestore(&endp->queue_lock.slock, + irqs); + if (retval) { + return retval; + } else { + u132_endp_queue_work(u132, endp, 0); + return 0; + } + } else if (u132->num_endpoints == MAX_U132_ENDPS) { + return -EINVAL; + } else + return create_endpoint_and_queue_bulk(u132, + udev, hep, urb, usb_dev, usb_addr, + usb_endp, address, mem_flags); + } else { + struct u132_endp *endp = hep->hcpriv; + u16 urb_size = 8; + u8 *b = urb->setup_packet; + int i = 0; + char data[30 *3 + 4]; + char *d = data; + int m = (sizeof(data) - 1) / 3; + int l = 0; + data[0] = 0; + while (urb_size-- > 0) { + if (i > m) { + } else if (i++ < m) { + int w = sprintf(d, " %02X", *b++); + d += w; + l += w; + } else + d += sprintf(d, " .."); + } + if (endp) { + unsigned long irqs; + int retval; + spin_lock_irqsave(&endp->queue_lock.slock, + irqs); + retval = queue_control_on_old_endpoint(u132, + hep, urb, usb_dev, endp, usb_addr, + usb_endp); + spin_unlock_irqrestore(&endp->queue_lock.slock, + irqs); + if (retval) { + return retval; + } else { + u132_endp_queue_work(u132, endp, 0); + return 0; + } + } else if (u132->num_endpoints == MAX_U132_ENDPS) { + return -EINVAL; + } else + return create_endpoint_and_queue_control(u132, + hep, urb, usb_dev, usb_addr, usb_endp, + mem_flags); + } + } +} + +static int dequeue_from_overflow_chain(struct u132 *u132, + struct u132_endp *endp, struct urb *urb) +{ + struct list_head *scan; + struct list_head *head = &endp->urb_more; + list_for_each(scan, head) { + struct u132_urbq *urbq = list_entry(scan, struct u132_urbq, + urb_more); + if (urbq->urb == urb) { + struct usb_hcd *hcd = u132_to_hcd(u132); + list_del(scan); + endp->queue_size -= 1; + urb->error_count = 0; + urb->hcpriv = NULL; + usb_hcd_giveback_urb(hcd, urb, NULL); + return 0; + } else + continue; + } + dev_err(&u132->platform_dev->dev, "urb=%p not found in endp[%d]=%p ring" + "[%d] %c%c usb_endp=%d usb_addr=%d size=%d next=%04X last=%04X" + "\n", urb, endp->endp_number, endp, endp->ring->number, + endp->input ? 'I' : ' ', endp->output ? 'O' : ' ', + endp->usb_endp, endp->usb_addr, endp->queue_size, + endp->queue_next, endp->queue_last); + return -EINVAL; +} + +static int u132_endp_urb_dequeue(struct u132 *u132, struct u132_endp *endp, + struct urb *urb) +{ + unsigned long irqs; + spin_lock_irqsave(&endp->queue_lock.slock, irqs); + if (endp->queue_size == 0) { + dev_err(&u132->platform_dev->dev, "urb=%p not found in endp[%d]" + "=%p ring[%d] %c%c usb_endp=%d usb_addr=%d\n", urb, + endp->endp_number, endp, endp->ring->number, + endp->input ? 'I' : ' ', endp->output ? 'O' : ' ', + endp->usb_endp, endp->usb_addr); + spin_unlock_irqrestore(&endp->queue_lock.slock, irqs); + return -EINVAL; + } + if (urb == endp->urb_list[ENDP_QUEUE_MASK & endp->queue_next]) { + if (endp->active) { + endp->dequeueing = 1; + endp->edset_flush = 1; + u132_endp_queue_work(u132, endp, 0); + spin_unlock_irqrestore(&endp->queue_lock.slock, irqs); + urb->hcpriv = NULL; + return 0; + } else { + spin_unlock_irqrestore(&endp->queue_lock.slock, irqs); + u132_hcd_abandon_urb(u132, endp, urb, urb->status); + return 0; + } + } else { + u16 queue_list = 0; + u16 queue_size = endp->queue_size; + u16 queue_scan = endp->queue_next; + struct urb **urb_slot = NULL; + while (++queue_list < ENDP_QUEUE_SIZE && --queue_size > 0) { + if (urb == endp->urb_list[ENDP_QUEUE_MASK & + ++queue_scan]) { + urb_slot = &endp->urb_list[ENDP_QUEUE_MASK & + queue_scan]; + break; + } else + continue; + } + while (++queue_list < ENDP_QUEUE_SIZE && --queue_size > 0) { + *urb_slot = endp->urb_list[ENDP_QUEUE_MASK & + ++queue_scan]; + urb_slot = &endp->urb_list[ENDP_QUEUE_MASK & + queue_scan]; + } + if (urb_slot) { + struct usb_hcd *hcd = u132_to_hcd(u132); + endp->queue_size -= 1; + if (list_empty(&endp->urb_more)) { + spin_unlock_irqrestore(&endp->queue_lock.slock, + irqs); + } else { + struct list_head *next = endp->urb_more.next; + struct u132_urbq *urbq = list_entry(next, + struct u132_urbq, urb_more); + list_del(next); + *urb_slot = urbq->urb; + spin_unlock_irqrestore(&endp->queue_lock.slock, + irqs); + kfree(urbq); + } urb->error_count = 0; + urb->hcpriv = NULL; + usb_hcd_giveback_urb(hcd, urb, NULL); + return 0; + } else if (list_empty(&endp->urb_more)) { + dev_err(&u132->platform_dev->dev, "urb=%p not found in " + "endp[%d]=%p ring[%d] %c%c usb_endp=%d usb_addr" + "=%d size=%d next=%04X last=%04X\n", urb, + endp->endp_number, endp, endp->ring->number, + endp->input ? 'I' : ' ', + endp->output ? 'O' : ' ', endp->usb_endp, + endp->usb_addr, endp->queue_size, + endp->queue_next, endp->queue_last); + spin_unlock_irqrestore(&endp->queue_lock.slock, irqs); + return -EINVAL; + } else { + int retval = dequeue_from_overflow_chain(u132, endp, + urb); + spin_unlock_irqrestore(&endp->queue_lock.slock, irqs); + return retval; + } + } +} + +static int u132_urb_dequeue(struct usb_hcd *hcd, struct urb *urb) +{ + struct u132 *u132 = hcd_to_u132(hcd); + if (u132->going > 2) { + dev_err(&u132->platform_dev->dev, "device has been removed %d\n" + , u132->going); + return -ENODEV; + } else { + u8 usb_addr = usb_pipedevice(urb->pipe); + u8 usb_endp = usb_pipeendpoint(urb->pipe); + u8 address = u132->addr[usb_addr].address; + struct u132_udev *udev = &u132->udev[address]; + if (usb_pipein(urb->pipe)) { + u8 endp_number = udev->endp_number_in[usb_endp]; + struct u132_endp *endp = u132->endp[endp_number - 1]; + return u132_endp_urb_dequeue(u132, endp, urb); + } else { + u8 endp_number = udev->endp_number_out[usb_endp]; + struct u132_endp *endp = u132->endp[endp_number - 1]; + return u132_endp_urb_dequeue(u132, endp, urb); + } + } +} + +static void u132_endpoint_disable(struct usb_hcd *hcd, + struct usb_host_endpoint *hep) +{ + struct u132 *u132 = hcd_to_u132(hcd); + if (u132->going > 2) { + dev_err(&u132->platform_dev->dev, "device has been removed %d\n" + , u132->going); + } else { + struct u132_endp *endp = hep->hcpriv; + if (endp) + u132_endp_put_kref(u132, endp); + } +} + +static int u132_get_frame(struct usb_hcd *hcd) +{ + struct u132 *u132 = hcd_to_u132(hcd); + if (u132->going > 1) { + dev_err(&u132->platform_dev->dev, "device has been removed %d\n" + , u132->going); + return -ENODEV; + } else if (u132->going > 0) { + dev_err(&u132->platform_dev->dev, "device is being removed\n"); + return -ESHUTDOWN; + } else { + int frame = 0; + dev_err(&u132->platform_dev->dev, "TODO: u132_get_frame\n"); + msleep(100); + return frame; + } +} + +static int u132_roothub_descriptor(struct u132 *u132, + struct usb_hub_descriptor *desc) +{ + int retval; + u16 temp; + u32 rh_a = -1; + u32 rh_b = -1; + retval = u132_read_pcimem(u132, roothub.a, &rh_a); + if (retval) + return retval; + desc->bDescriptorType = 0x29; + desc->bPwrOn2PwrGood = (rh_a & RH_A_POTPGT) >> 24; + desc->bHubContrCurrent = 0; + desc->bNbrPorts = u132->num_ports; + temp = 1 + (u132->num_ports / 8); + desc->bDescLength = 7 + 2 *temp; + temp = 0; + if (rh_a & RH_A_NPS) + temp |= 0x0002; + if (rh_a & RH_A_PSM) + temp |= 0x0001; + if (rh_a & RH_A_NOCP) { + temp |= 0x0010; + } else if (rh_a & RH_A_OCPM) + temp |= 0x0008; + desc->wHubCharacteristics = cpu_to_le16(temp); + retval = u132_read_pcimem(u132, roothub.b, &rh_b); + if (retval) + return retval; + memset(desc->bitmap, 0xff, sizeof(desc->bitmap)); + desc->bitmap[0] = rh_b & RH_B_DR; + if (u132->num_ports > 7) { + desc->bitmap[1] = (rh_b & RH_B_DR) >> 8; + desc->bitmap[2] = 0xff; + } else + desc->bitmap[1] = 0xff; + return 0; +} + +static int u132_roothub_status(struct u132 *u132, __le32 *desc) +{ + u32 rh_status = -1; + int ret_status = u132_read_pcimem(u132, roothub.status, &rh_status); + *desc = cpu_to_le32(rh_status); + return ret_status; +} + +static int u132_roothub_portstatus(struct u132 *u132, __le32 *desc, u16 wIndex) +{ + if (wIndex == 0 || wIndex > u132->num_ports) { + return -EINVAL; + } else { + int port = wIndex - 1; + u32 rh_portstatus = -1; + int ret_portstatus = u132_read_pcimem(u132, + roothub.portstatus[port], &rh_portstatus); + *desc = cpu_to_le32(rh_portstatus); + if (*(u16 *) (desc + 2)) { + dev_info(&u132->platform_dev->dev, "Port %d Status Chan" + "ge = %08X\n", port, *desc); + } + return ret_portstatus; + } +} + + +/* this timer value might be vendor-specific ... */ +#define PORT_RESET_HW_MSEC 10 +#define PORT_RESET_MSEC 10 +/* wrap-aware logic morphed from <linux/jiffies.h> */ +#define tick_before(t1, t2) ((s16)(((s16)(t1))-((s16)(t2))) < 0) +static int u132_roothub_portreset(struct u132 *u132, int port_index) +{ + int retval; + u32 fmnumber; + u16 now; + u16 reset_done; + retval = u132_read_pcimem(u132, fmnumber, &fmnumber); + if (retval) + return retval; + now = fmnumber; + reset_done = now + PORT_RESET_MSEC; + do { + u32 portstat; + do { + retval = u132_read_pcimem(u132, + roothub.portstatus[port_index], &portstat); + if (retval) + return retval; + if (RH_PS_PRS & portstat) { + continue; + } else + break; + } while (tick_before(now, reset_done)); + if (RH_PS_PRS & portstat) + return -ENODEV; + if (RH_PS_CCS & portstat) { + if (RH_PS_PRSC & portstat) { + retval = u132_write_pcimem(u132, + roothub.portstatus[port_index], + RH_PS_PRSC); + if (retval) + return retval; + } + } else + break; /* start the next reset, + sleep till it's probably done */ + retval = u132_write_pcimem(u132, roothub.portstatus[port_index], + RH_PS_PRS); + if (retval) + return retval; + msleep(PORT_RESET_HW_MSEC); + retval = u132_read_pcimem(u132, fmnumber, &fmnumber); + if (retval) + return retval; + now = fmnumber; + } while (tick_before(now, reset_done)); + return 0; +} + +static int u132_roothub_setportfeature(struct u132 *u132, u16 wValue, + u16 wIndex) +{ + if (wIndex == 0 || wIndex > u132->num_ports) { + return -EINVAL; + } else { + int retval; + int port_index = wIndex - 1; + struct u132_port *port = &u132->port[port_index]; + port->Status &= ~(1 << wValue); + switch (wValue) { + case USB_PORT_FEAT_SUSPEND: + retval = u132_write_pcimem(u132, + roothub.portstatus[port_index], RH_PS_PSS); + if (retval) + return retval; + return 0; + case USB_PORT_FEAT_POWER: + retval = u132_write_pcimem(u132, + roothub.portstatus[port_index], RH_PS_PPS); + if (retval) + return retval; + return 0; + case USB_PORT_FEAT_RESET: + retval = u132_roothub_portreset(u132, port_index); + if (retval) + return retval; + return 0; + default: + return -EPIPE; + } + } +} + +static int u132_roothub_clearportfeature(struct u132 *u132, u16 wValue, + u16 wIndex) +{ + if (wIndex == 0 || wIndex > u132->num_ports) { + return -EINVAL; + } else { + int port_index = wIndex - 1; + u32 temp; + int retval; + struct u132_port *port = &u132->port[port_index]; + port->Status &= ~(1 << wValue); + switch (wValue) { + case USB_PORT_FEAT_ENABLE: + temp = RH_PS_CCS; + break; + case USB_PORT_FEAT_C_ENABLE: + temp = RH_PS_PESC; + break; + case USB_PORT_FEAT_SUSPEND: + temp = RH_PS_POCI; + if ((u132->hc_control & OHCI_CTRL_HCFS) + != OHCI_USB_OPER) { + dev_err(&u132->platform_dev->dev, "TODO resume_" + "root_hub\n"); + } + break; + case USB_PORT_FEAT_C_SUSPEND: + temp = RH_PS_PSSC; + break; + case USB_PORT_FEAT_POWER: + temp = RH_PS_LSDA; + break; + case USB_PORT_FEAT_C_CONNECTION: + temp = RH_PS_CSC; + break; + case USB_PORT_FEAT_C_OVER_CURRENT: + temp = RH_PS_OCIC; + break; + case USB_PORT_FEAT_C_RESET: + temp = RH_PS_PRSC; + break; + default: + return -EPIPE; + } + retval = u132_write_pcimem(u132, roothub.portstatus[port_index], + temp); + if (retval) + return retval; + return 0; + } +} + + +/* the virtual root hub timer IRQ checks for hub status*/ +static int u132_hub_status_data(struct usb_hcd *hcd, char *buf) +{ + struct u132 *u132 = hcd_to_u132(hcd); + if (u132->going > 1) { + dev_err(&u132->platform_dev->dev, "device hcd=%p has been remov" + "ed %d\n", hcd, u132->going); + return -ENODEV; + } else if (u132->going > 0) { + dev_err(&u132->platform_dev->dev, "device hcd=%p is being remov" + "ed\n", hcd); + dump_stack(); + return -ESHUTDOWN; + } else { + int i, changed = 0, length = 1; + if (u132->flags & OHCI_QUIRK_AMD756) { + if ((u132->hc_roothub_a & RH_A_NDP) > MAX_ROOT_PORTS) { + dev_err(&u132->platform_dev->dev, "bogus NDP, r" + "ereads as NDP=%d\n", + u132->hc_roothub_a & RH_A_NDP); + goto done; + } + } + if (u132->hc_roothub_status & (RH_HS_LPSC | RH_HS_OCIC)) { + buf[0] = changed = 1; + } else + buf[0] = 0; + if (u132->num_ports > 7) { + buf[1] = 0; + length++; + } + for (i = 0; i < u132->num_ports; i++) { + if (u132->hc_roothub_portstatus[i] & (RH_PS_CSC | + RH_PS_PESC | RH_PS_PSSC | RH_PS_OCIC | + RH_PS_PRSC)) { + changed = 1; + if (i < 7) { + buf[0] |= 1 << (i + 1); + } else + buf[1] |= 1 << (i - 7); + continue; + } + if (!(u132->hc_roothub_portstatus[i] & RH_PS_CCS)) { + continue; + } + if ((u132->hc_roothub_portstatus[i] & RH_PS_PSS)) { + continue; + } + } + done:return changed ? length : 0; + } +} + +static int u132_hub_control(struct usb_hcd *hcd, u16 typeReq, u16 wValue, + u16 wIndex, char *buf, u16 wLength) +{ + struct u132 *u132 = hcd_to_u132(hcd); + if (u132->going > 1) { + dev_err(&u132->platform_dev->dev, "device has been removed %d\n" + , u132->going); + return -ENODEV; + } else if (u132->going > 0) { + dev_err(&u132->platform_dev->dev, "device is being removed\n"); + return -ESHUTDOWN; + } else { + int retval = 0; + down(&u132->sw_lock); + switch (typeReq) { + case ClearHubFeature: + switch (wValue) { + case C_HUB_OVER_CURRENT: + case C_HUB_LOCAL_POWER: + break; + default: + goto stall; + } + break; + case SetHubFeature: + switch (wValue) { + case C_HUB_OVER_CURRENT: + case C_HUB_LOCAL_POWER: + break; + default: + goto stall; + } + break; + case ClearPortFeature:{ + retval = u132_roothub_clearportfeature(u132, + wValue, wIndex); + if (retval) + goto error; + break; + } + case GetHubDescriptor:{ + retval = u132_roothub_descriptor(u132, + (struct usb_hub_descriptor *)buf); + if (retval) + goto error; + break; + } + case GetHubStatus:{ + retval = u132_roothub_status(u132, + (__le32 *) buf); + if (retval) + goto error; + break; + } + case GetPortStatus:{ + retval = u132_roothub_portstatus(u132, + (__le32 *) buf, wIndex); + if (retval) + goto error; + break; + } + case SetPortFeature:{ + retval = u132_roothub_setportfeature(u132, + wValue, wIndex); + if (retval) + goto error; + break; + } + default: + goto stall; + error:u132_disable(u132); + u132->going = 1; + break; + stall:retval = -EPIPE; + break; + } + up(&u132->sw_lock); + return retval; + } +} + +static int u132_start_port_reset(struct usb_hcd *hcd, unsigned port_num) +{ + struct u132 *u132 = hcd_to_u132(hcd); + if (u132->going > 1) { + dev_err(&u132->platform_dev->dev, "device has been removed %d\n" + , u132->going); + return -ENODEV; + } else if (u132->going > 0) { + dev_err(&u132->platform_dev->dev, "device is being removed\n"); + return -ESHUTDOWN; + } else + return 0; +} + +static void u132_hub_irq_enable(struct usb_hcd *hcd) +{ + struct u132 *u132 = hcd_to_u132(hcd); + if (u132->going > 1) { + dev_err(&u132->platform_dev->dev, "device has been removed %d\n" + , u132->going); + } else if (u132->going > 0) + dev_err(&u132->platform_dev->dev, "device is being removed\n"); +} + + +#ifdef CONFIG_PM +static int u132_hcd_suspend(struct usb_hcd *hcd, pm_message_t message) +{ + struct u132 *u132 = hcd_to_u132(hcd); + if (u132->going > 1) { + dev_err(&u132->platform_dev->dev, "device has been removed %d\n" + , u132->going); + return -ENODEV; + } else if (u132->going > 0) { + dev_err(&u132->platform_dev->dev, "device is being removed\n"); + return -ESHUTDOWN; + } else + return 0; +} + +static int u132_hcd_resume(struct usb_hcd *hcd) +{ + struct u132 *u132 = hcd_to_u132(hcd); + if (u132->going > 1) { + dev_err(&u132->platform_dev->dev, "device has been removed %d\n" + , u132->going); + return -ENODEV; + } else if (u132->going > 0) { + dev_err(&u132->platform_dev->dev, "device is being removed\n"); + return -ESHUTDOWN; + } else + return 0; +} + +static int u132_bus_suspend(struct usb_hcd *hcd) +{ + struct u132 *u132 = hcd_to_u132(hcd); + if (u132->going > 1) { + dev_err(&u132->platform_dev->dev, "device has been removed %d\n" + , u132->going); + return -ENODEV; + } else if (u132->going > 0) { + dev_err(&u132->platform_dev->dev, "device is being removed\n"); + return -ESHUTDOWN; + } else + return 0; +} + +static int u132_bus_resume(struct usb_hcd *hcd) +{ + struct u132 *u132 = hcd_to_u132(hcd); + if (u132->going > 1) { + dev_err(&u132->platform_dev->dev, "device has been removed %d\n" + , u132->going); + return -ENODEV; + } else if (u132->going > 0) { + dev_err(&u132->platform_dev->dev, "device is being removed\n"); + return -ESHUTDOWN; + } else + return 0; +} + +#else +#define u132_hcd_suspend NULL +#define u132_hcd_resume NULL +#define u132_bus_suspend NULL +#define u132_bus_resume NULL +#endif +static struct hc_driver u132_hc_driver = { + .description = hcd_name, + .hcd_priv_size = sizeof(struct u132), + .irq = NULL, + .flags = HCD_USB11 | HCD_MEMORY, + .reset = u132_hcd_reset, + .start = u132_hcd_start, + .suspend = u132_hcd_suspend, + .resume = u132_hcd_resume, + .stop = u132_hcd_stop, + .urb_enqueue = u132_urb_enqueue, + .urb_dequeue = u132_urb_dequeue, + .endpoint_disable = u132_endpoint_disable, + .get_frame_number = u132_get_frame, + .hub_status_data = u132_hub_status_data, + .hub_control = u132_hub_control, + .bus_suspend = u132_bus_suspend, + .bus_resume = u132_bus_resume, + .start_port_reset = u132_start_port_reset, + .hub_irq_enable = u132_hub_irq_enable, +}; + +/* +* This function may be called by the USB core whilst the "usb_all_devices_rwsem" +* is held for writing, thus this module must not call usb_remove_hcd() +* synchronously - but instead should immediately stop activity to the +* device and ansynchronously call usb_remove_hcd() +*/ +static int __devexit u132_remove(struct platform_device *pdev) +{ + struct usb_hcd *hcd = platform_get_drvdata(pdev); + if (hcd) { + struct u132 *u132 = hcd_to_u132(hcd); + dump_stack(); + if (u132->going++ > 1) { + return -ENODEV; + } else { + int rings = MAX_U132_RINGS; + int endps = MAX_U132_ENDPS; + msleep(100); + down(&u132->sw_lock); + u132_monitor_cancel_work(u132); + while (rings-- > 0) { + struct u132_ring *ring = &u132->ring[rings]; + u132_ring_cancel_work(u132, ring); + } while (endps-- > 0) { + struct u132_endp *endp = u132->endp[endps]; + if (endp) + u132_endp_cancel_work(u132, endp); + } + u132->going += 1; + printk(KERN_INFO "removing device u132.%d\n", + u132->sequence_num); + up(&u132->sw_lock); + usb_remove_hcd(hcd); + u132_u132_put_kref(u132); + return 0; + } + } else + return 0; +} + +static void u132_initialise(struct u132 *u132, struct platform_device *pdev) +{ + int rings = MAX_U132_RINGS; + int ports = MAX_U132_PORTS; + int addrs = MAX_U132_ADDRS; + int udevs = MAX_U132_UDEVS; + int endps = MAX_U132_ENDPS; + u132->board = pdev->dev.platform_data; + u132->platform_dev = pdev; + u132->power = 0; + u132->reset = 0; + init_MUTEX(&u132->sw_lock); + init_MUTEX(&u132->scheduler_lock); + while (rings-- > 0) { + struct u132_ring *ring = &u132->ring[rings]; + ring->u132 = u132; + ring->number = rings + 1; + ring->length = 0; + ring->curr_endp = NULL; + INIT_WORK(&ring->scheduler, u132_hcd_ring_work_scheduler, + (void *)ring); + } down(&u132->sw_lock); + INIT_WORK(&u132->monitor, u132_hcd_monitor_work, (void *)u132); + while (ports-- > 0) { + struct u132_port *port = &u132->port[ports]; + port->u132 = u132; + port->reset = 0; + port->enable = 0; + port->power = 0; + port->Status = 0; + } while (addrs-- > 0) { + struct u132_addr *addr = &u132->addr[addrs]; + addr->address = 0; + } while (udevs-- > 0) { + struct u132_udev *udev = &u132->udev[udevs]; + int i = ARRAY_SIZE(udev->endp_number_in); + int o = ARRAY_SIZE(udev->endp_number_out); + udev->usb_device = NULL; + udev->udev_number = 0; + udev->usb_addr = 0; + udev->portnumber = 0; + while (i-- > 0) { + udev->endp_number_in[i] = 0; + } + while (o-- > 0) { + udev->endp_number_out[o] = 0; + } + } + while (endps-- > 0) { + u132->endp[endps] = NULL; + } + up(&u132->sw_lock); + return; +} + +static int __devinit u132_probe(struct platform_device *pdev) +{ + struct usb_hcd *hcd; + msleep(100); + if (u132_exiting > 0) { + return -ENODEV; + } /* refuse to confuse usbcore */ + if (pdev->dev.dma_mask) { + return -EINVAL; + } + hcd = usb_create_hcd(&u132_hc_driver, &pdev->dev, pdev->dev.bus_id); + if (!hcd) { + printk(KERN_ERR "failed to create the usb hcd struct for U132\n" + ); + ftdi_elan_gone_away(pdev); + return -ENOMEM; + } else { + int retval = 0; + struct u132 *u132 = hcd_to_u132(hcd); + hcd->rsrc_start = 0; + down(&u132_module_lock); + list_add_tail(&u132->u132_list, &u132_static_list); + u132->sequence_num = ++u132_instances; + up(&u132_module_lock); + u132_u132_init_kref(u132); + u132_initialise(u132, pdev); + hcd->product_desc = "ELAN U132 Host Controller"; + retval = usb_add_hcd(hcd, 0, 0); + if (retval != 0) { + dev_err(&u132->platform_dev->dev, "init error %d\n", + retval); + u132_u132_put_kref(u132); + return retval; + } else { + u132_monitor_queue_work(u132, 100); + return 0; + } + } +} + + +#ifdef CONFIG_PM +/* for this device there's no useful distinction between the controller +* and its root hub, except that the root hub only gets direct PM calls +* when CONFIG_USB_SUSPEND is enabled. +*/ +static int u132_suspend(struct platform_device *pdev, pm_message_t state) +{ + struct usb_hcd *hcd = platform_get_drvdata(pdev); + struct u132 *u132 = hcd_to_u132(hcd); + if (u132->going > 1) { + dev_err(&u132->platform_dev->dev, "device has been removed %d\n" + , u132->going); + return -ENODEV; + } else if (u132->going > 0) { + dev_err(&u132->platform_dev->dev, "device is being removed\n"); + return -ESHUTDOWN; + } else { + int retval = 0; + if (state.event == PM_EVENT_FREEZE) { + retval = u132_bus_suspend(hcd); + } else if (state.event == PM_EVENT_SUSPEND) { + int ports = MAX_U132_PORTS; + while (ports-- > 0) { + port_power(u132, ports, 0); + } + } + if (retval == 0) + pdev->dev.power.power_state = state; + return retval; + } +} + +static int u132_resume(struct platform_device *pdev) +{ + struct usb_hcd *hcd = platform_get_drvdata(pdev); + struct u132 *u132 = hcd_to_u132(hcd); + if (u132->going > 1) { + dev_err(&u132->platform_dev->dev, "device has been removed %d\n" + , u132->going); + return -ENODEV; + } else if (u132->going > 0) { + dev_err(&u132->platform_dev->dev, "device is being removed\n"); + return -ESHUTDOWN; + } else { + int retval = 0; + if (pdev->dev.power.power_state.event == PM_EVENT_SUSPEND) { + int ports = MAX_U132_PORTS; + while (ports-- > 0) { + port_power(u132, ports, 1); + } + retval = 0; + } else { + pdev->dev.power.power_state = PMSG_ON; + retval = u132_bus_resume(hcd); + } + return retval; + } +} + +#else +#define u132_suspend NULL +#define u132_resume NULL +#endif +/* +* this driver is loaded explicitely by ftdi_u132 +* +* the platform_driver struct is static because it is per type of module +*/ +static struct platform_driver u132_platform_driver = { + .probe = u132_probe, + .remove = __devexit_p(u132_remove), + .suspend = u132_suspend, + .resume = u132_resume, + .driver = { + .name = (char *)hcd_name, + .owner = THIS_MODULE, + }, +}; +static int __init u132_hcd_init(void) +{ + int retval; + INIT_LIST_HEAD(&u132_static_list); + u132_instances = 0; + u132_exiting = 0; + init_MUTEX(&u132_module_lock); + if (usb_disabled()) + return -ENODEV; + printk(KERN_INFO "driver %s built at %s on %s\n", hcd_name, __TIME__, + __DATE__); + workqueue = create_singlethread_workqueue("u132"); + retval = platform_driver_register(&u132_platform_driver); + return retval; +} + + +module_init(u132_hcd_init); +static void __exit u132_hcd_exit(void) +{ + struct u132 *u132; + struct u132 *temp; + down(&u132_module_lock); + u132_exiting += 1; + up(&u132_module_lock); + list_for_each_entry_safe(u132, temp, &u132_static_list, u132_list) { + platform_device_unregister(u132->platform_dev); + } platform_driver_unregister(&u132_platform_driver); + printk(KERN_INFO "u132-hcd driver deregistered\n"); + wait_event(u132_hcd_wait, u132_instances == 0); + flush_workqueue(workqueue); + destroy_workqueue(workqueue); +} + + +module_exit(u132_hcd_exit); +MODULE_LICENSE("GPL"); diff --git a/drivers/usb/host/uhci-debug.c b/drivers/usb/host/uhci-debug.c index dc286a48caf..e345f15b7d8 100644 --- a/drivers/usb/host/uhci-debug.c +++ b/drivers/usb/host/uhci-debug.c @@ -16,7 +16,7 @@ #include "uhci-hcd.h" -#define uhci_debug_operations (* (struct file_operations *) NULL) +#define uhci_debug_operations (* (const struct file_operations *) NULL) static struct dentry *uhci_debugfs_root; #ifdef DEBUG @@ -428,7 +428,7 @@ struct uhci_debug { static int uhci_debug_open(struct inode *inode, struct file *file) { - struct uhci_hcd *uhci = inode->u.generic_ip; + struct uhci_hcd *uhci = inode->i_private; struct uhci_debug *up; int ret = -ENOMEM; unsigned long flags; @@ -500,7 +500,7 @@ static int uhci_debug_release(struct inode *inode, struct file *file) } #undef uhci_debug_operations -static struct file_operations uhci_debug_operations = { +static const struct file_operations uhci_debug_operations = { .owner = THIS_MODULE, .open = uhci_debug_open, .llseek = uhci_debug_lseek, diff --git a/drivers/usb/host/uhci-hcd.c b/drivers/usb/host/uhci-hcd.c index 4151f618602..eb4eab98e8b 100644 --- a/drivers/usb/host/uhci-hcd.c +++ b/drivers/usb/host/uhci-hcd.c @@ -734,6 +734,10 @@ static int uhci_suspend(struct usb_hcd *hcd, pm_message_t message) /* FIXME: Enable non-PME# remote wakeup? */ + /* make sure snapshot being resumed re-enumerates everything */ + if (message.event == PM_EVENT_PRETHAW) + uhci_hc_died(uhci); + done_okay: clear_bit(HCD_FLAG_HW_ACCESSIBLE, &hcd->flags); done: @@ -909,8 +913,7 @@ static int __init uhci_hcd_init(void) return 0; init_failed: - if (kmem_cache_destroy(uhci_up_cachep)) - warn("not all urb_privs were freed!"); + kmem_cache_destroy(uhci_up_cachep); up_failed: debugfs_remove(uhci_debugfs_root); @@ -926,10 +929,7 @@ errbuf_failed: static void __exit uhci_hcd_cleanup(void) { pci_unregister_driver(&uhci_pci_driver); - - if (kmem_cache_destroy(uhci_up_cachep)) - warn("not all urb_privs were freed!"); - + kmem_cache_destroy(uhci_up_cachep); debugfs_remove(uhci_debugfs_root); kfree(errbuf); } diff --git a/drivers/usb/host/uhci-hub.c b/drivers/usb/host/uhci-hub.c index c545ef92fe2..16fb72eb6fc 100644 --- a/drivers/usb/host/uhci-hub.c +++ b/drivers/usb/host/uhci-hub.c @@ -84,6 +84,7 @@ static void uhci_finish_suspend(struct uhci_hcd *uhci, int port, unsigned long port_addr) { int status; + int i; if (inw(port_addr) & (USBPORTSC_SUSP | USBPORTSC_RD)) { CLR_RH_PORTSTAT(USBPORTSC_SUSP | USBPORTSC_RD); @@ -92,9 +93,14 @@ static void uhci_finish_suspend(struct uhci_hcd *uhci, int port, /* The controller won't actually turn off the RD bit until * it has had a chance to send a low-speed EOP sequence, - * which takes 3 bit times (= 2 microseconds). We'll delay - * slightly longer for good luck. */ - udelay(4); + * which is supposed to take 3 bit times (= 2 microseconds). + * Experiments show that some controllers take longer, so + * we'll poll for completion. */ + for (i = 0; i < 10; ++i) { + if (!(inw(port_addr) & USBPORTSC_RD)) + break; + udelay(1); + } } clear_bit(port, &uhci->resuming_ports); } diff --git a/drivers/usb/image/mdc800.c b/drivers/usb/image/mdc800.c index 08daf400f98..ca6305c1d64 100644 --- a/drivers/usb/image/mdc800.c +++ b/drivers/usb/image/mdc800.c @@ -424,7 +424,7 @@ static void mdc800_usb_download_notify (struct urb *urb, struct pt_regs *res) ***************************************************************************/ static struct usb_driver mdc800_usb_driver; -static struct file_operations mdc800_device_ops; +static const struct file_operations mdc800_device_ops; static struct usb_class_driver mdc800_class = { .name = "mdc800%d", .fops = &mdc800_device_ops, @@ -941,7 +941,7 @@ static ssize_t mdc800_device_write (struct file *file, const char __user *buf, s ****************************************************************************/ /* File Operations of this drivers */ -static struct file_operations mdc800_device_ops = +static const struct file_operations mdc800_device_ops = { .owner = THIS_MODULE, .read = mdc800_device_read, diff --git a/drivers/usb/input/Kconfig b/drivers/usb/input/Kconfig index 650103bc961..a102a58fe36 100644 --- a/drivers/usb/input/Kconfig +++ b/drivers/usb/input/Kconfig @@ -205,10 +205,12 @@ config USB_TOUCHSCREEN depends on USB && INPUT ---help--- USB Touchscreen driver for: - - eGalax Touchkit USB + - eGalax Touchkit USB (also includes eTurboTouch CT-410/510/700) - PanJit TouchSet USB - - 3M MicroTouch USB + - 3M MicroTouch USB (EX II series) - ITM + - some other eTurboTouch + - Gunze AHL61 Have a look at <http://linux.chapter7.ch/touchkit/> for a usage description and the required user-space stuff. @@ -218,7 +220,7 @@ config USB_TOUCHSCREEN config USB_TOUCHSCREEN_EGALAX default y - bool "eGalax device support" if EMBEDDED + bool "eGalax, eTurboTouch CT-410/510/700 device support" if EMBEDDED depends on USB_TOUCHSCREEN config USB_TOUCHSCREEN_PANJIT @@ -228,7 +230,7 @@ config USB_TOUCHSCREEN_PANJIT config USB_TOUCHSCREEN_3M default y - bool "3M/Microtouch device support" if EMBEDDED + bool "3M/Microtouch EX II series device support" if EMBEDDED depends on USB_TOUCHSCREEN config USB_TOUCHSCREEN_ITM @@ -236,6 +238,16 @@ config USB_TOUCHSCREEN_ITM bool "ITM device support" if EMBEDDED depends on USB_TOUCHSCREEN +config USB_TOUCHSCREEN_ETURBO + default y + bool "eTurboTouch (non-eGalax compatible) device support" if EMBEDDED + depends on USB_TOUCHSCREEN + +config USB_TOUCHSCREEN_GUNZE + default y + bool "Gunze AHL61 device support" if EMBEDDED + depends on USB_TOUCHSCREEN + config USB_YEALINK tristate "Yealink usb-p1k voip phone" depends on USB && INPUT && EXPERIMENTAL @@ -326,3 +338,13 @@ config USB_APPLETOUCH To compile this driver as a module, choose M here: the module will be called appletouch. + +config USB_TRANCEVIBRATOR + tristate "PlayStation 2 Trance Vibrator driver support" + depends on USB + help + Say Y here if you want to connect a PlayStation 2 Trance Vibrator + device to your computer's USB port. + + To compile this driver as a module, choose M here: the + module will be called trancevibrator. diff --git a/drivers/usb/input/Makefile b/drivers/usb/input/Makefile index 764114529c5..48551be324a 100644 --- a/drivers/usb/input/Makefile +++ b/drivers/usb/input/Makefile @@ -3,6 +3,7 @@ # # Multipart objects. +wacom-objs := wacom_sys.o wacom_wac.o usbhid-objs := hid-core.o # Optional parts of multipart objects. @@ -44,6 +45,7 @@ obj-$(CONFIG_USB_ACECAD) += acecad.o obj-$(CONFIG_USB_YEALINK) += yealink.o obj-$(CONFIG_USB_XPAD) += xpad.o obj-$(CONFIG_USB_APPLETOUCH) += appletouch.o +obj-$(CONFIG_USB_TRANCEVIBRATOR) += trancevibrator.o ifeq ($(CONFIG_USB_DEBUG),y) EXTRA_CFLAGS += -DDEBUG diff --git a/drivers/usb/input/acecad.c b/drivers/usb/input/acecad.c index 18c10e150ef..d83603ba40a 100644 --- a/drivers/usb/input/acecad.c +++ b/drivers/usb/input/acecad.c @@ -141,10 +141,7 @@ static int usb_acecad_probe(struct usb_interface *intf, const struct usb_device_ endpoint = &interface->endpoint[0].desc; - if (!(endpoint->bEndpointAddress & 0x80)) - return -ENODEV; - - if ((endpoint->bmAttributes & 3) != 3) + if (!usb_endpoint_is_int_in(endpoint)) return -ENODEV; pipe = usb_rcvintpipe(dev, endpoint->bEndpointAddress); diff --git a/drivers/usb/input/appletouch.c b/drivers/usb/input/appletouch.c index 044faa07e29..0aa9cc2bfd6 100644 --- a/drivers/usb/input/appletouch.c +++ b/drivers/usb/input/appletouch.c @@ -436,10 +436,7 @@ static int atp_probe(struct usb_interface *iface, const struct usb_device_id *id iface_desc = iface->cur_altsetting; for (i = 0; i < iface_desc->desc.bNumEndpoints; i++) { endpoint = &iface_desc->endpoint[i].desc; - if (!int_in_endpointAddr && - (endpoint->bEndpointAddress & USB_DIR_IN) && - ((endpoint->bmAttributes & USB_ENDPOINT_XFERTYPE_MASK) - == USB_ENDPOINT_XFER_INT)) { + if (!int_in_endpointAddr && usb_endpoint_is_int_in(endpoint)) { /* we found an interrupt in endpoint */ int_in_endpointAddr = endpoint->bEndpointAddress; break; diff --git a/drivers/usb/input/ati_remote.c b/drivers/usb/input/ati_remote.c index 3719fcb04b8..3558d7ed99b 100644 --- a/drivers/usb/input/ati_remote.c +++ b/drivers/usb/input/ati_remote.c @@ -732,12 +732,8 @@ static int ati_remote_probe(struct usb_interface *interface, const struct usb_de endpoint_in = &iface_host->endpoint[0].desc; endpoint_out = &iface_host->endpoint[1].desc; - if (!(endpoint_in->bEndpointAddress & USB_DIR_IN)) { - err("%s: Unexpected endpoint_in->bEndpointAddress\n", __FUNCTION__); - return -ENODEV; - } - if ((endpoint_in->bmAttributes & USB_ENDPOINT_XFERTYPE_MASK) != USB_ENDPOINT_XFER_INT) { - err("%s: Unexpected endpoint_in->bmAttributes\n", __FUNCTION__); + if (!usb_endpoint_is_int_in(endpoint_in)) { + err("%s: Unexpected endpoint_in\n", __FUNCTION__); return -ENODEV; } if (le16_to_cpu(endpoint_in->wMaxPacketSize) == 0) { diff --git a/drivers/usb/input/hid-core.c b/drivers/usb/input/hid-core.c index 3305fb6079e..2a3e9e9b4b3 100644 --- a/drivers/usb/input/hid-core.c +++ b/drivers/usb/input/hid-core.c @@ -1023,7 +1023,8 @@ static void hid_irq_in(struct urb *urb, struct pt_regs *regs) return; case -EILSEQ: /* protocol error or unplug */ case -EPROTO: /* protocol error or unplug */ - case -ETIMEDOUT: /* NAK */ + case -ETIME: /* protocol error or unplug */ + case -ETIMEDOUT: /* Should never happen, but... */ clear_bit(HID_IN_RUNNING, &hid->iofl); hid_io_error(hid); return; @@ -1535,13 +1536,17 @@ void hid_init_reports(struct hid_device *hid) #define USB_VENDOR_ID_GLAB 0x06c2 #define USB_DEVICE_ID_4_PHIDGETSERVO_30 0x0038 #define USB_DEVICE_ID_1_PHIDGETSERVO_30 0x0039 -#define USB_DEVICE_ID_8_8_8_IF_KIT 0x0045 #define USB_DEVICE_ID_0_0_4_IF_KIT 0x0040 +#define USB_DEVICE_ID_0_16_16_IF_KIT 0x0044 +#define USB_DEVICE_ID_8_8_8_IF_KIT 0x0045 +#define USB_DEVICE_ID_0_8_7_IF_KIT 0x0051 #define USB_DEVICE_ID_0_8_8_IF_KIT 0x0053 +#define USB_DEVICE_ID_PHIDGET_MOTORCONTROL 0x0058 #define USB_VENDOR_ID_WISEGROUP 0x0925 #define USB_DEVICE_ID_1_PHIDGETSERVO_20 0x8101 #define USB_DEVICE_ID_4_PHIDGETSERVO_20 0x8104 +#define USB_DEVICE_ID_8_8_4_IF_KIT 0x8201 #define USB_DEVICE_ID_DUAL_USB_JOYPAD 0x8866 #define USB_VENDOR_ID_WISEGROUP_LTD 0x6677 @@ -1591,6 +1596,10 @@ void hid_init_reports(struct hid_device *hid) #define USB_VENDOR_ID_YEALINK 0x6993 #define USB_DEVICE_ID_YEALINK_P1K_P4K_B2K 0xb001 + +#define USB_VENDOR_ID_ALCOR 0x058f +#define USB_DEVICE_ID_ALCOR_USBRS232 0x9720 + /* * Alphabetically sorted blacklist by quirk type. */ @@ -1608,6 +1617,7 @@ static const struct hid_blacklist { { USB_VENDOR_ID_AIPTEK, USB_DEVICE_ID_AIPTEK_22, HID_QUIRK_IGNORE }, { USB_VENDOR_ID_AIPTEK, USB_DEVICE_ID_AIPTEK_23, HID_QUIRK_IGNORE }, { USB_VENDOR_ID_AIPTEK, USB_DEVICE_ID_AIPTEK_24, HID_QUIRK_IGNORE }, + { USB_VENDOR_ID_ALCOR, USB_DEVICE_ID_ALCOR_USBRS232, HID_QUIRK_IGNORE }, { USB_VENDOR_ID_BERKSHIRE, USB_DEVICE_ID_BERKSHIRE_PCWD, HID_QUIRK_IGNORE }, { USB_VENDOR_ID_CODEMERCS, USB_DEVICE_ID_CODEMERCS_IOW40, HID_QUIRK_IGNORE }, { USB_VENDOR_ID_CODEMERCS, USB_DEVICE_ID_CODEMERCS_IOW24, HID_QUIRK_IGNORE }, @@ -1620,9 +1630,12 @@ static const struct hid_blacklist { { USB_VENDOR_ID_ESSENTIAL_REALITY, USB_DEVICE_ID_ESSENTIAL_REALITY_P5, HID_QUIRK_IGNORE }, { USB_VENDOR_ID_GLAB, USB_DEVICE_ID_4_PHIDGETSERVO_30, HID_QUIRK_IGNORE }, { USB_VENDOR_ID_GLAB, USB_DEVICE_ID_1_PHIDGETSERVO_30, HID_QUIRK_IGNORE }, - { USB_VENDOR_ID_GLAB, USB_DEVICE_ID_8_8_8_IF_KIT, HID_QUIRK_IGNORE }, { USB_VENDOR_ID_GLAB, USB_DEVICE_ID_0_0_4_IF_KIT, HID_QUIRK_IGNORE }, + { USB_VENDOR_ID_GLAB, USB_DEVICE_ID_0_16_16_IF_KIT, HID_QUIRK_IGNORE }, + { USB_VENDOR_ID_GLAB, USB_DEVICE_ID_8_8_8_IF_KIT, HID_QUIRK_IGNORE }, + { USB_VENDOR_ID_GLAB, USB_DEVICE_ID_0_8_7_IF_KIT, HID_QUIRK_IGNORE }, { USB_VENDOR_ID_GLAB, USB_DEVICE_ID_0_8_8_IF_KIT, HID_QUIRK_IGNORE }, + { USB_VENDOR_ID_GLAB, USB_DEVICE_ID_PHIDGET_MOTORCONTROL, HID_QUIRK_IGNORE }, { USB_VENDOR_ID_GRIFFIN, USB_DEVICE_ID_POWERMATE, HID_QUIRK_IGNORE }, { USB_VENDOR_ID_GRIFFIN, USB_DEVICE_ID_SOUNDKNOB, HID_QUIRK_IGNORE }, { USB_VENDOR_ID_GTCO, USB_DEVICE_ID_GTCO_90, HID_QUIRK_IGNORE }, @@ -1690,7 +1703,11 @@ static const struct hid_blacklist { { USB_VENDOR_ID_MGE, USB_DEVICE_ID_MGE_UPS, HID_QUIRK_IGNORE }, { USB_VENDOR_ID_MGE, USB_DEVICE_ID_MGE_UPS1, HID_QUIRK_IGNORE }, { USB_VENDOR_ID_ONTRAK, USB_DEVICE_ID_ONTRAK_ADU100, HID_QUIRK_IGNORE }, + { USB_VENDOR_ID_ONTRAK, USB_DEVICE_ID_ONTRAK_ADU100 + 20, HID_QUIRK_IGNORE }, + { USB_VENDOR_ID_ONTRAK, USB_DEVICE_ID_ONTRAK_ADU100 + 30, HID_QUIRK_IGNORE }, { USB_VENDOR_ID_ONTRAK, USB_DEVICE_ID_ONTRAK_ADU100 + 100, HID_QUIRK_IGNORE }, + { USB_VENDOR_ID_ONTRAK, USB_DEVICE_ID_ONTRAK_ADU100 + 108, HID_QUIRK_IGNORE }, + { USB_VENDOR_ID_ONTRAK, USB_DEVICE_ID_ONTRAK_ADU100 + 118, HID_QUIRK_IGNORE }, { USB_VENDOR_ID_ONTRAK, USB_DEVICE_ID_ONTRAK_ADU100 + 200, HID_QUIRK_IGNORE }, { USB_VENDOR_ID_ONTRAK, USB_DEVICE_ID_ONTRAK_ADU100 + 300, HID_QUIRK_IGNORE }, { USB_VENDOR_ID_ONTRAK, USB_DEVICE_ID_ONTRAK_ADU100 + 400, HID_QUIRK_IGNORE }, @@ -1701,6 +1718,7 @@ static const struct hid_blacklist { { USB_VENDOR_ID_VERNIER, USB_DEVICE_ID_VERNIER_CYCLOPS, HID_QUIRK_IGNORE }, { USB_VENDOR_ID_WISEGROUP, USB_DEVICE_ID_4_PHIDGETSERVO_20, HID_QUIRK_IGNORE }, { USB_VENDOR_ID_WISEGROUP, USB_DEVICE_ID_1_PHIDGETSERVO_20, HID_QUIRK_IGNORE }, + { USB_VENDOR_ID_WISEGROUP, USB_DEVICE_ID_8_8_4_IF_KIT, HID_QUIRK_IGNORE }, { USB_VENDOR_ID_YEALINK, USB_DEVICE_ID_YEALINK_P1K_P4K_B2K, HID_QUIRK_IGNORE }, { USB_VENDOR_ID_ACECAD, USB_DEVICE_ID_ACECAD_FLAIR, HID_QUIRK_IGNORE }, diff --git a/drivers/usb/input/hiddev.c b/drivers/usb/input/hiddev.c index f6b839c257a..a2b419d1374 100644 --- a/drivers/usb/input/hiddev.c +++ b/drivers/usb/input/hiddev.c @@ -722,7 +722,7 @@ inval: return -EINVAL; } -static struct file_operations hiddev_fops = { +static const struct file_operations hiddev_fops = { .owner = THIS_MODULE, .read = hiddev_read, .write = hiddev_write, diff --git a/drivers/usb/input/itmtouch.c b/drivers/usb/input/itmtouch.c index 86acb5f1907..61966d719ca 100644 --- a/drivers/usb/input/itmtouch.c +++ b/drivers/usb/input/itmtouch.c @@ -87,7 +87,7 @@ static void itmtouch_irq(struct urb *urb, struct pt_regs *regs) case 0: /* success */ break; - case -ETIMEDOUT: + case -ETIME: /* this urb is timing out */ dbg("%s - urb timed out - was the device unplugged?", __FUNCTION__); diff --git a/drivers/usb/input/keyspan_remote.c b/drivers/usb/input/keyspan_remote.c index 4723b310f27..a9035955157 100644 --- a/drivers/usb/input/keyspan_remote.c +++ b/drivers/usb/input/keyspan_remote.c @@ -420,8 +420,7 @@ static struct usb_endpoint_descriptor *keyspan_get_in_endpoint(struct usb_host_i for (i = 0; i < iface->desc.bNumEndpoints; ++i) { endpoint = &iface->endpoint[i].desc; - if ((endpoint->bEndpointAddress & USB_DIR_IN) && - ((endpoint->bmAttributes & USB_ENDPOINT_XFERTYPE_MASK) == USB_ENDPOINT_XFER_INT)) { + if (usb_endpoint_is_int_in(endpoint)) { /* we found our interrupt in endpoint */ return endpoint; } diff --git a/drivers/usb/input/mtouchusb.c b/drivers/usb/input/mtouchusb.c index a9ccda8810e..5dce951f275 100644 --- a/drivers/usb/input/mtouchusb.c +++ b/drivers/usb/input/mtouchusb.c @@ -107,7 +107,7 @@ static void mtouchusb_irq(struct urb *urb, struct pt_regs *regs) case 0: /* success */ break; - case -ETIMEDOUT: + case -ETIME: /* this urb is timing out */ dbg("%s - urb timed out - was the device unplugged?", __FUNCTION__); diff --git a/drivers/usb/input/powermate.c b/drivers/usb/input/powermate.c index b3c0d0c3eae..f0f8db6810a 100644 --- a/drivers/usb/input/powermate.c +++ b/drivers/usb/input/powermate.c @@ -313,9 +313,7 @@ static int powermate_probe(struct usb_interface *intf, const struct usb_device_i interface = intf->cur_altsetting; endpoint = &interface->endpoint[0].desc; - if (!(endpoint->bEndpointAddress & 0x80)) - return -EIO; - if ((endpoint->bmAttributes & 3) != 3) + if (!usb_endpoint_is_int_in(endpoint)) return -EIO; usb_control_msg(udev, usb_sndctrlpipe(udev, 0), diff --git a/drivers/usb/input/touchkitusb.c b/drivers/usb/input/touchkitusb.c index 0149043ffb9..30b9f820e7a 100644 --- a/drivers/usb/input/touchkitusb.c +++ b/drivers/usb/input/touchkitusb.c @@ -201,7 +201,7 @@ static void touchkit_irq(struct urb *urb, struct pt_regs *regs) case 0: /* success */ break; - case -ETIMEDOUT: + case -ETIME: /* this urb is timing out */ dbg("%s - urb timed out - was the device unplugged?", __FUNCTION__); diff --git a/drivers/usb/input/trancevibrator.c b/drivers/usb/input/trancevibrator.c new file mode 100644 index 00000000000..33cd91d11ec --- /dev/null +++ b/drivers/usb/input/trancevibrator.c @@ -0,0 +1,159 @@ +/* + * PlayStation 2 Trance Vibrator driver + * + * Copyright (C) 2006 Sam Hocevar <sam@zoy.org> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. + */ + +/* Standard include files */ +#include <linux/kernel.h> +#include <linux/errno.h> +#include <linux/init.h> +#include <linux/module.h> +#include <linux/usb.h> + +/* Version Information */ +#define DRIVER_VERSION "v1.1" +#define DRIVER_AUTHOR "Sam Hocevar, sam@zoy.org" +#define DRIVER_DESC "PlayStation 2 Trance Vibrator driver" + +#define TRANCEVIBRATOR_VENDOR_ID 0x0b49 /* ASCII Corporation */ +#define TRANCEVIBRATOR_PRODUCT_ID 0x064f /* Trance Vibrator */ + +static struct usb_device_id id_table [] = { + { USB_DEVICE(TRANCEVIBRATOR_VENDOR_ID, TRANCEVIBRATOR_PRODUCT_ID) }, + { }, +}; +MODULE_DEVICE_TABLE (usb, id_table); + +/* Driver-local specific stuff */ +struct trancevibrator { + struct usb_device *udev; + unsigned int speed; +}; + +static ssize_t show_speed(struct device *dev, struct device_attribute *attr, + char *buf) +{ + struct usb_interface *intf = to_usb_interface(dev); + struct trancevibrator *tv = usb_get_intfdata(intf); + + return sprintf(buf, "%d\n", tv->speed); +} + +static ssize_t set_speed(struct device *dev, struct device_attribute *attr, + const char *buf, size_t count) +{ + struct usb_interface *intf = to_usb_interface(dev); + struct trancevibrator *tv = usb_get_intfdata(intf); + int temp, retval; + + temp = simple_strtoul(buf, NULL, 10); + if (temp > 255) + temp = 255; + else if (temp < 0) + temp = 0; + tv->speed = temp; + + dev_dbg(&tv->udev->dev, "speed = %d\n", tv->speed); + + /* Set speed */ + retval = usb_control_msg(tv->udev, usb_sndctrlpipe(tv->udev, 0), + 0x01, /* vendor request: set speed */ + USB_DIR_IN | USB_TYPE_VENDOR | USB_RECIP_OTHER, + tv->speed, /* speed value */ + 0, NULL, 0, USB_CTRL_GET_TIMEOUT); + if (retval) { + dev_dbg(&tv->udev->dev, "retval = %d\n", retval); + return retval; + } + return count; +} + +static DEVICE_ATTR(speed, S_IWUGO | S_IRUGO, show_speed, set_speed); + +static int tv_probe(struct usb_interface *interface, + const struct usb_device_id *id) +{ + struct usb_device *udev = interface_to_usbdev(interface); + struct trancevibrator *dev; + int retval; + + dev = kzalloc(sizeof(struct trancevibrator), GFP_KERNEL); + if (dev == NULL) { + dev_err(&interface->dev, "Out of memory\n"); + retval = -ENOMEM; + goto error; + } + + dev->udev = usb_get_dev(udev); + usb_set_intfdata(interface, dev); + retval = device_create_file(&interface->dev, &dev_attr_speed); + if (retval) + goto error_create_file; + + return 0; + +error_create_file: + usb_put_dev(udev); + usb_set_intfdata(interface, NULL); +error: + kfree(dev); + return retval; +} + +static void tv_disconnect(struct usb_interface *interface) +{ + struct trancevibrator *dev; + + dev = usb_get_intfdata (interface); + usb_set_intfdata(interface, NULL); + device_remove_file(&interface->dev, &dev_attr_speed); + usb_put_dev(dev->udev); + kfree(dev); +} + +/* USB subsystem object */ +static struct usb_driver tv_driver = { + .name = "trancevibrator", + .probe = tv_probe, + .disconnect = tv_disconnect, + .id_table = id_table, +}; + +static int __init tv_init(void) +{ + int retval = usb_register(&tv_driver); + if (retval) { + err("usb_register failed. Error number %d", retval); + return retval; + } + + info(DRIVER_VERSION ":" DRIVER_DESC); + return 0; +} + +static void __exit tv_exit(void) +{ + usb_deregister(&tv_driver); +} + +module_init (tv_init); +module_exit (tv_exit); + +MODULE_AUTHOR(DRIVER_AUTHOR); +MODULE_DESCRIPTION(DRIVER_DESC); +MODULE_LICENSE("GPL"); diff --git a/drivers/usb/input/usbmouse.c b/drivers/usb/input/usbmouse.c index 446935b671d..0fb792be95e 100644 --- a/drivers/usb/input/usbmouse.c +++ b/drivers/usb/input/usbmouse.c @@ -218,7 +218,7 @@ static void usb_mouse_disconnect(struct usb_interface *intf) static struct usb_device_id usb_mouse_id_table [] = { { USB_INTERFACE_INFO(3, 1, 2) }, - { } /* Terminating entry */ + { } /* Terminating entry */ }; MODULE_DEVICE_TABLE (usb, usb_mouse_id_table); diff --git a/drivers/usb/input/usbtouchscreen.c b/drivers/usb/input/usbtouchscreen.c index a338bf4c2d7..4640d1000d8 100644 --- a/drivers/usb/input/usbtouchscreen.c +++ b/drivers/usb/input/usbtouchscreen.c @@ -2,9 +2,12 @@ * usbtouchscreen.c * Driver for USB Touchscreens, supporting those devices: * - eGalax Touchkit - * - 3M/Microtouch + * includes eTurboTouch CT-410/510/700 + * - 3M/Microtouch EX II series * - ITM * - PanJit TouchSet + * - eTurboTouch + * - Gunze AHL61 * * Copyright (C) 2004-2006 by Daniel Ritz <daniel.ritz@gmx.ch> * Copyright (C) by Todd E. Johnson (mtouchusb.c) @@ -42,7 +45,7 @@ #include <linux/usb/input.h> -#define DRIVER_VERSION "v0.3" +#define DRIVER_VERSION "v0.4" #define DRIVER_AUTHOR "Daniel Ritz <daniel.ritz@gmx.ch>" #define DRIVER_DESC "USB Touchscreen Driver" @@ -60,6 +63,7 @@ struct usbtouch_device_info { int flags; void (*process_pkt) (struct usbtouch_usb *usbtouch, struct pt_regs *regs, unsigned char *pkt, int len); + int (*get_pkt_len) (unsigned char *pkt, int len); int (*read_data) (unsigned char *pkt, int *x, int *y, int *touch, int *press); int (*init) (struct usbtouch_usb *usbtouch); }; @@ -81,8 +85,16 @@ struct usbtouch_usb { char phys[64]; }; -static void usbtouch_process_pkt(struct usbtouch_usb *usbtouch, - struct pt_regs *regs, unsigned char *pkt, int len); + +#if defined(CONFIG_USB_TOUCHSCREEN_EGALAX) || defined(CONFIG_USB_TOUCHSCREEN_ETURBO) +#define MULTI_PACKET +#endif + +#ifdef MULTI_PACKET +static void usbtouch_process_multi(struct usbtouch_usb *usbtouch, + struct pt_regs *regs, + unsigned char *pkt, int len); +#endif /* device types */ enum { @@ -91,14 +103,19 @@ enum { DEVTYPE_PANJIT, DEVTYPE_3M, DEVTYPE_ITM, + DEVTYPE_ETURBO, + DEVTYPE_GUNZE, }; static struct usb_device_id usbtouch_devices[] = { #ifdef CONFIG_USB_TOUCHSCREEN_EGALAX {USB_DEVICE(0x3823, 0x0001), .driver_info = DEVTYPE_EGALAX}, + {USB_DEVICE(0x3823, 0x0002), .driver_info = DEVTYPE_EGALAX}, {USB_DEVICE(0x0123, 0x0001), .driver_info = DEVTYPE_EGALAX}, {USB_DEVICE(0x0eef, 0x0001), .driver_info = DEVTYPE_EGALAX}, {USB_DEVICE(0x0eef, 0x0002), .driver_info = DEVTYPE_EGALAX}, + {USB_DEVICE(0x1234, 0x0001), .driver_info = DEVTYPE_EGALAX}, + {USB_DEVICE(0x1234, 0x0002), .driver_info = DEVTYPE_EGALAX}, #endif #ifdef CONFIG_USB_TOUCHSCREEN_PANJIT @@ -116,6 +133,14 @@ static struct usb_device_id usbtouch_devices[] = { {USB_DEVICE(0x0403, 0xf9e9), .driver_info = DEVTYPE_ITM}, #endif +#ifdef CONFIG_USB_TOUCHSCREEN_ETURBO + {USB_DEVICE(0x1234, 0x5678), .driver_info = DEVTYPE_ETURBO}, +#endif + +#ifdef CONFIG_USB_TOUCHSCREEN_GUNZE + {USB_DEVICE(0x0637, 0x0001), .driver_info = DEVTYPE_GUNZE}, +#endif + {} }; @@ -140,82 +165,23 @@ static int egalax_read_data(unsigned char *pkt, int *x, int *y, int *touch, int *touch = pkt[0] & 0x01; return 1; - } -static int egalax_get_pkt_len(unsigned char *buf) +static int egalax_get_pkt_len(unsigned char *buf, int len) { switch (buf[0] & EGALAX_PKT_TYPE_MASK) { case EGALAX_PKT_TYPE_REPT: return 5; case EGALAX_PKT_TYPE_DIAG: + if (len < 2) + return -1; + return buf[1] + 2; } return 0; } - -static void egalax_process(struct usbtouch_usb *usbtouch, struct pt_regs *regs, - unsigned char *pkt, int len) -{ - unsigned char *buffer; - int pkt_len, buf_len, pos; - - /* if the buffer contains data, append */ - if (unlikely(usbtouch->buf_len)) { - int tmp; - - /* if only 1 byte in buffer, add another one to get length */ - if (usbtouch->buf_len == 1) - usbtouch->buffer[1] = pkt[0]; - - pkt_len = egalax_get_pkt_len(usbtouch->buffer); - - /* unknown packet: drop everything */ - if (!pkt_len) - return; - - /* append, process */ - tmp = pkt_len - usbtouch->buf_len; - memcpy(usbtouch->buffer + usbtouch->buf_len, pkt, tmp); - usbtouch_process_pkt(usbtouch, regs, usbtouch->buffer, pkt_len); - - buffer = pkt + tmp; - buf_len = len - tmp; - } else { - buffer = pkt; - buf_len = len; - } - - /* only one byte left in buffer */ - if (unlikely(buf_len == 1)) { - usbtouch->buffer[0] = buffer[0]; - usbtouch->buf_len = 1; - return; - } - - /* loop over the buffer */ - pos = 0; - while (pos < buf_len) { - /* get packet len */ - pkt_len = egalax_get_pkt_len(buffer + pos); - - /* unknown packet: drop everything */ - if (unlikely(!pkt_len)) - return; - - /* full packet: process */ - if (likely(pkt_len <= buf_len)) { - usbtouch_process_pkt(usbtouch, regs, buffer + pos, pkt_len); - } else { - /* incomplete packet: save in buffer */ - memcpy(usbtouch->buffer, buffer + pos, buf_len - pos); - usbtouch->buf_len = buf_len - pos; - } - pos += pkt_len; - } -} #endif @@ -254,7 +220,7 @@ static int mtouch_read_data(unsigned char *pkt, int *x, int *y, int *touch, int static int mtouch_init(struct usbtouch_usb *usbtouch) { - int ret; + int ret, i; ret = usb_control_msg(usbtouch->udev, usb_rcvctrlpipe(usbtouch->udev, 0), MTOUCHUSB_RESET, @@ -264,15 +230,20 @@ static int mtouch_init(struct usbtouch_usb *usbtouch) __FUNCTION__, ret); if (ret < 0) return ret; - - ret = usb_control_msg(usbtouch->udev, usb_rcvctrlpipe(usbtouch->udev, 0), - MTOUCHUSB_ASYNC_REPORT, - USB_DIR_OUT | USB_TYPE_VENDOR | USB_RECIP_DEVICE, - 1, 1, NULL, 0, USB_CTRL_SET_TIMEOUT); - dbg("%s - usb_control_msg - MTOUCHUSB_ASYNC_REPORT - bytes|err: %d", - __FUNCTION__, ret); - if (ret < 0) - return ret; + msleep(150); + + for (i = 0; i < 3; i++) { + ret = usb_control_msg(usbtouch->udev, usb_rcvctrlpipe(usbtouch->udev, 0), + MTOUCHUSB_ASYNC_REPORT, + USB_DIR_OUT | USB_TYPE_VENDOR | USB_RECIP_DEVICE, + 1, 1, NULL, 0, USB_CTRL_SET_TIMEOUT); + dbg("%s - usb_control_msg - MTOUCHUSB_ASYNC_REPORT - bytes|err: %d", + __FUNCTION__, ret); + if (ret >= 0) + break; + if (ret != -EPIPE) + return ret; + } return 0; } @@ -296,6 +267,54 @@ static int itm_read_data(unsigned char *pkt, int *x, int *y, int *touch, int *pr /***************************************************************************** + * eTurboTouch part + */ +#ifdef CONFIG_USB_TOUCHSCREEN_ETURBO +static int eturbo_read_data(unsigned char *pkt, int *x, int *y, int *touch, int *press) +{ + unsigned int shift; + + /* packets should start with sync */ + if (!(pkt[0] & 0x80)) + return 0; + + shift = (6 - (pkt[0] & 0x03)); + *x = ((pkt[3] << 7) | pkt[4]) >> shift; + *y = ((pkt[1] << 7) | pkt[2]) >> shift; + *touch = (pkt[0] & 0x10) ? 1 : 0; + + return 1; +} + +static int eturbo_get_pkt_len(unsigned char *buf, int len) +{ + if (buf[0] & 0x80) + return 5; + if (buf[0] == 0x01) + return 3; + return 0; +} +#endif + + +/***************************************************************************** + * Gunze part + */ +#ifdef CONFIG_USB_TOUCHSCREEN_GUNZE +static int gunze_read_data(unsigned char *pkt, int *x, int *y, int *touch, int *press) +{ + if (!(pkt[0] & 0x80) || ((pkt[1] | pkt[2] | pkt[3]) & 0x80)) + return 0; + + *x = ((pkt[0] & 0x1F) << 7) | (pkt[2] & 0x7F); + *y = ((pkt[1] & 0x1F) << 7) | (pkt[3] & 0x7F); + *touch = pkt[0] & 0x20; + + return 1; +} +#endif + +/***************************************************************************** * the different device descriptors */ static struct usbtouch_device_info usbtouch_dev_info[] = { @@ -307,7 +326,8 @@ static struct usbtouch_device_info usbtouch_dev_info[] = { .max_yc = 0x07ff, .rept_size = 16, .flags = USBTOUCH_FLG_BUFFER, - .process_pkt = egalax_process, + .process_pkt = usbtouch_process_multi, + .get_pkt_len = egalax_get_pkt_len, .read_data = egalax_read_data, }, #endif @@ -346,6 +366,31 @@ static struct usbtouch_device_info usbtouch_dev_info[] = { .read_data = itm_read_data, }, #endif + +#ifdef CONFIG_USB_TOUCHSCREEN_ETURBO + [DEVTYPE_ETURBO] = { + .min_xc = 0x0, + .max_xc = 0x07ff, + .min_yc = 0x0, + .max_yc = 0x07ff, + .rept_size = 8, + .flags = USBTOUCH_FLG_BUFFER, + .process_pkt = usbtouch_process_multi, + .get_pkt_len = eturbo_get_pkt_len, + .read_data = eturbo_read_data, + }, +#endif + +#ifdef CONFIG_USB_TOUCHSCREEN_GUNZE + [DEVTYPE_GUNZE] = { + .min_xc = 0x0, + .max_xc = 0x0fff, + .min_yc = 0x0, + .max_yc = 0x0fff, + .rept_size = 4, + .read_data = gunze_read_data, + }, +#endif }; @@ -377,6 +422,83 @@ static void usbtouch_process_pkt(struct usbtouch_usb *usbtouch, } +#ifdef MULTI_PACKET +static void usbtouch_process_multi(struct usbtouch_usb *usbtouch, + struct pt_regs *regs, + unsigned char *pkt, int len) +{ + unsigned char *buffer; + int pkt_len, pos, buf_len, tmp; + + /* process buffer */ + if (unlikely(usbtouch->buf_len)) { + /* try to get size */ + pkt_len = usbtouch->type->get_pkt_len( + usbtouch->buffer, usbtouch->buf_len); + + /* drop? */ + if (unlikely(!pkt_len)) + goto out_flush_buf; + + /* need to append -pkt_len bytes before able to get size */ + if (unlikely(pkt_len < 0)) { + int append = -pkt_len; + if (unlikely(append > len)) + append = len; + if (usbtouch->buf_len + append >= usbtouch->type->rept_size) + goto out_flush_buf; + memcpy(usbtouch->buffer + usbtouch->buf_len, pkt, append); + usbtouch->buf_len += append; + + pkt_len = usbtouch->type->get_pkt_len( + usbtouch->buffer, usbtouch->buf_len); + if (pkt_len < 0) + return; + } + + /* append */ + tmp = pkt_len - usbtouch->buf_len; + if (usbtouch->buf_len + tmp >= usbtouch->type->rept_size) + goto out_flush_buf; + memcpy(usbtouch->buffer + usbtouch->buf_len, pkt, tmp); + usbtouch_process_pkt(usbtouch, regs, usbtouch->buffer, pkt_len); + + buffer = pkt + tmp; + buf_len = len - tmp; + } else { + buffer = pkt; + buf_len = len; + } + + /* loop over the received packet, process */ + pos = 0; + while (pos < buf_len) { + /* get packet len */ + pkt_len = usbtouch->type->get_pkt_len(buffer + pos, len); + + /* unknown packet: drop everything */ + if (unlikely(!pkt_len)) + goto out_flush_buf; + + /* full packet: process */ + if (likely((pkt_len > 0) && (pkt_len <= buf_len - pos))) { + usbtouch_process_pkt(usbtouch, regs, buffer + pos, pkt_len); + } else { + /* incomplete packet: save in buffer */ + memcpy(usbtouch->buffer, buffer + pos, buf_len - pos); + usbtouch->buf_len = buf_len - pos; + return; + } + pos += pkt_len; + } + +out_flush_buf: + usbtouch->buf_len = 0; + return; +} +#endif + + static void usbtouch_irq(struct urb *urb, struct pt_regs *regs) { struct usbtouch_usb *usbtouch = urb->context; @@ -386,7 +508,7 @@ static void usbtouch_irq(struct urb *urb, struct pt_regs *regs) case 0: /* success */ break; - case -ETIMEDOUT: + case -ETIME: /* this urb is timing out */ dbg("%s - urb timed out - was the device unplugged?", __FUNCTION__); @@ -452,7 +574,7 @@ static int usbtouch_probe(struct usb_interface *intf, struct usb_endpoint_descriptor *endpoint; struct usb_device *udev = interface_to_usbdev(intf); struct usbtouch_device_info *type; - int err; + int err = -ENOMEM; interface = intf->cur_altsetting; endpoint = &interface->endpoint[0].desc; @@ -526,6 +648,7 @@ static int usbtouch_probe(struct usb_interface *intf, usbtouch->data, type->rept_size, usbtouch_irq, usbtouch, endpoint->bInterval); + usbtouch->irq->dev = usbtouch->udev; usbtouch->irq->transfer_dma = usbtouch->data_dma; usbtouch->irq->transfer_flags |= URB_NO_TRANSFER_DMA_MAP; @@ -553,7 +676,7 @@ out_free_buffers: out_free: input_free_device(input_dev); kfree(usbtouch); - return -ENOMEM; + return err; } static void usbtouch_disconnect(struct usb_interface *intf) diff --git a/drivers/usb/input/wacom.c b/drivers/usb/input/wacom.c deleted file mode 100644 index 369461a70b7..00000000000 --- a/drivers/usb/input/wacom.c +++ /dev/null @@ -1,1003 +0,0 @@ -/* - * USB Wacom Graphire and Wacom Intuos tablet support - * - * Copyright (c) 2000-2004 Vojtech Pavlik <vojtech@ucw.cz> - * Copyright (c) 2000 Andreas Bach Aaen <abach@stofanet.dk> - * Copyright (c) 2000 Clifford Wolf <clifford@clifford.at> - * Copyright (c) 2000 Sam Mosel <sam.mosel@computer.org> - * Copyright (c) 2000 James E. Blair <corvus@gnu.org> - * Copyright (c) 2000 Daniel Egger <egger@suse.de> - * Copyright (c) 2001 Frederic Lepied <flepied@mandrakesoft.com> - * Copyright (c) 2004 Panagiotis Issaris <panagiotis.issaris@mech.kuleuven.ac.be> - * Copyright (c) 2002-2006 Ping Cheng <pingc@wacom.com> - * - * ChangeLog: - * v0.1 (vp) - Initial release - * v0.2 (aba) - Support for all buttons / combinations - * v0.3 (vp) - Support for Intuos added - * v0.4 (sm) - Support for more Intuos models, menustrip - * relative mode, proximity. - * v0.5 (vp) - Big cleanup, nifty features removed, - * they belong in userspace - * v1.8 (vp) - Submit URB only when operating, moved to CVS, - * use input_report_key instead of report_btn and - * other cleanups - * v1.11 (vp) - Add URB ->dev setting for new kernels - * v1.11 (jb) - Add support for the 4D Mouse & Lens - * v1.12 (de) - Add support for two more inking pen IDs - * v1.14 (vp) - Use new USB device id probing scheme. - * Fix Wacom Graphire mouse wheel - * v1.18 (vp) - Fix mouse wheel direction - * Make mouse relative - * v1.20 (fl) - Report tool id for Intuos devices - * - Multi tools support - * - Corrected Intuos protocol decoding (airbrush, 4D mouse, lens cursor...) - * - Add PL models support - * - Fix Wacom Graphire mouse wheel again - * v1.21 (vp) - Removed protocol descriptions - * - Added MISC_SERIAL for tool serial numbers - * (gb) - Identify version on module load. - * v1.21.1 (fl) - added Graphire2 support - * v1.21.2 (fl) - added Intuos2 support - * - added all the PL ids - * v1.21.3 (fl) - added another eraser id from Neil Okamoto - * - added smooth filter for Graphire from Peri Hankey - * - added PenPartner support from Olaf van Es - * - new tool ids from Ole Martin Bjoerndalen - * v1.29 (pc) - Add support for more tablets - * - Fix pressure reporting - * v1.30 (vp) - Merge 2.4 and 2.5 drivers - * - Since 2.5 now has input_sync(), remove MSC_SERIAL abuse - * - Cleanups here and there - * v1.30.1 (pi) - Added Graphire3 support - * v1.40 (pc) - Add support for several new devices, fix eraser reporting, ... - * v1.43 (pc) - Added support for Cintiq 21UX - * - Fixed a Graphire bug - * - Merged wacom_intuos3_irq into wacom_intuos_irq - * v1.44 (pc) - Added support for Graphire4, Cintiq 710, Intuos3 6x11, etc. - * - Report Device IDs - * v1.45 (pc) - Added support for DTF 521, Intuos3 12x12 and 12x19 - * - Minor data report fix - */ - -/* - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - */ - -#include <linux/kernel.h> -#include <linux/slab.h> -#include <linux/module.h> -#include <linux/init.h> -#include <linux/usb/input.h> -#include <asm/unaligned.h> - -/* - * Version Information - */ -#define DRIVER_VERSION "v1.45" -#define DRIVER_AUTHOR "Vojtech Pavlik <vojtech@ucw.cz>" -#define DRIVER_DESC "USB Wacom Graphire and Wacom Intuos tablet driver" -#define DRIVER_LICENSE "GPL" - -MODULE_AUTHOR(DRIVER_AUTHOR); -MODULE_DESCRIPTION(DRIVER_DESC); -MODULE_LICENSE(DRIVER_LICENSE); - -#define USB_VENDOR_ID_WACOM 0x056a -#define STYLUS_DEVICE_ID 0x02 -#define CURSOR_DEVICE_ID 0x06 -#define ERASER_DEVICE_ID 0x0A - -enum { - PENPARTNER = 0, - GRAPHIRE, - WACOM_G4, - PL, - INTUOS, - INTUOS3, - INTUOS312, - INTUOS319, - CINTIQ, - MAX_TYPE -}; - -struct wacom_features { - char *name; - int pktlen; - int x_max; - int y_max; - int pressure_max; - int distance_max; - int type; - usb_complete_t irq; -}; - -struct wacom { - signed char *data; - dma_addr_t data_dma; - struct input_dev *dev; - struct usb_device *usbdev; - struct urb *irq; - struct wacom_features *features; - int tool[2]; - int id[2]; - __u32 serial[2]; - char phys[32]; -}; - -#define USB_REQ_GET_REPORT 0x01 -#define USB_REQ_SET_REPORT 0x09 - -static int usb_get_report(struct usb_interface *intf, unsigned char type, - unsigned char id, void *buf, int size) -{ - return usb_control_msg(interface_to_usbdev(intf), - usb_rcvctrlpipe(interface_to_usbdev(intf), 0), - USB_REQ_GET_REPORT, USB_TYPE_CLASS | USB_RECIP_INTERFACE, - (type << 8) + id, intf->altsetting[0].desc.bInterfaceNumber, - buf, size, 100); -} - -static int usb_set_report(struct usb_interface *intf, unsigned char type, - unsigned char id, void *buf, int size) -{ - return usb_control_msg(interface_to_usbdev(intf), - usb_sndctrlpipe(interface_to_usbdev(intf), 0), - USB_REQ_SET_REPORT, USB_TYPE_CLASS | USB_RECIP_INTERFACE, - (type << 8) + id, intf->altsetting[0].desc.bInterfaceNumber, - buf, size, 1000); -} - -static void wacom_pl_irq(struct urb *urb, struct pt_regs *regs) -{ - struct wacom *wacom = urb->context; - unsigned char *data = wacom->data; - struct input_dev *dev = wacom->dev; - int prox, pressure, id; - int retval; - - switch (urb->status) { - case 0: - /* success */ - break; - case -ECONNRESET: - case -ENOENT: - case -ESHUTDOWN: - /* this urb is terminated, clean up */ - dbg("%s - urb shutting down with status: %d", __FUNCTION__, urb->status); - return; - default: - dbg("%s - nonzero urb status received: %d", __FUNCTION__, urb->status); - goto exit; - } - - if (data[0] != 2) { - dbg("wacom_pl_irq: received unknown report #%d", data[0]); - goto exit; - } - - prox = data[1] & 0x40; - - input_regs(dev, regs); - - id = ERASER_DEVICE_ID; - if (prox) { - - pressure = (signed char)((data[7] << 1) | ((data[4] >> 2) & 1)); - if (wacom->features->pressure_max > 255) - pressure = (pressure << 1) | ((data[4] >> 6) & 1); - pressure += (wacom->features->pressure_max + 1) / 2; - - /* - * if going from out of proximity into proximity select between the eraser - * and the pen based on the state of the stylus2 button, choose eraser if - * pressed else choose pen. if not a proximity change from out to in, send - * an out of proximity for previous tool then a in for new tool. - */ - if (!wacom->tool[0]) { - /* Eraser bit set for DTF */ - if (data[1] & 0x10) - wacom->tool[1] = BTN_TOOL_RUBBER; - else - /* Going into proximity select tool */ - wacom->tool[1] = (data[4] & 0x20) ? BTN_TOOL_RUBBER : BTN_TOOL_PEN; - } else { - /* was entered with stylus2 pressed */ - if (wacom->tool[1] == BTN_TOOL_RUBBER && !(data[4] & 0x20)) { - /* report out proximity for previous tool */ - input_report_key(dev, wacom->tool[1], 0); - input_sync(dev); - wacom->tool[1] = BTN_TOOL_PEN; - goto exit; - } - } - if (wacom->tool[1] != BTN_TOOL_RUBBER) { - /* Unknown tool selected default to pen tool */ - wacom->tool[1] = BTN_TOOL_PEN; - id = STYLUS_DEVICE_ID; - } - input_report_key(dev, wacom->tool[1], prox); /* report in proximity for tool */ - input_report_abs(dev, ABS_MISC, id); /* report tool id */ - input_report_abs(dev, ABS_X, data[3] | (data[2] << 7) | ((data[1] & 0x03) << 14)); - input_report_abs(dev, ABS_Y, data[6] | (data[5] << 7) | ((data[4] & 0x03) << 14)); - input_report_abs(dev, ABS_PRESSURE, pressure); - - input_report_key(dev, BTN_TOUCH, data[4] & 0x08); - input_report_key(dev, BTN_STYLUS, data[4] & 0x10); - /* Only allow the stylus2 button to be reported for the pen tool. */ - input_report_key(dev, BTN_STYLUS2, (wacom->tool[1] == BTN_TOOL_PEN) && (data[4] & 0x20)); - } else { - /* report proximity-out of a (valid) tool */ - if (wacom->tool[1] != BTN_TOOL_RUBBER) { - /* Unknown tool selected default to pen tool */ - wacom->tool[1] = BTN_TOOL_PEN; - } - input_report_key(dev, wacom->tool[1], prox); - } - - wacom->tool[0] = prox; /* Save proximity state */ - input_sync(dev); - - exit: - retval = usb_submit_urb (urb, GFP_ATOMIC); - if (retval) - err ("%s - usb_submit_urb failed with result %d", - __FUNCTION__, retval); -} - -static void wacom_ptu_irq(struct urb *urb, struct pt_regs *regs) -{ - struct wacom *wacom = urb->context; - unsigned char *data = wacom->data; - struct input_dev *dev = wacom->dev; - int retval, id; - - switch (urb->status) { - case 0: - /* success */ - break; - case -ECONNRESET: - case -ENOENT: - case -ESHUTDOWN: - /* this urb is terminated, clean up */ - dbg("%s - urb shutting down with status: %d", __FUNCTION__, urb->status); - return; - default: - dbg("%s - nonzero urb status received: %d", __FUNCTION__, urb->status); - goto exit; - } - - if (data[0] != 2) { - printk(KERN_INFO "wacom_ptu_irq: received unknown report #%d\n", data[0]); - goto exit; - } - - input_regs(dev, regs); - if (data[1] & 0x04) { - input_report_key(dev, BTN_TOOL_RUBBER, data[1] & 0x20); - input_report_key(dev, BTN_TOUCH, data[1] & 0x08); - id = ERASER_DEVICE_ID; - } else { - input_report_key(dev, BTN_TOOL_PEN, data[1] & 0x20); - input_report_key(dev, BTN_TOUCH, data[1] & 0x01); - id = STYLUS_DEVICE_ID; - } - input_report_abs(dev, ABS_MISC, id); /* report tool id */ - input_report_abs(dev, ABS_X, le16_to_cpu(*(__le16 *) &data[2])); - input_report_abs(dev, ABS_Y, le16_to_cpu(*(__le16 *) &data[4])); - input_report_abs(dev, ABS_PRESSURE, le16_to_cpu(*(__le16 *) &data[6])); - input_report_key(dev, BTN_STYLUS, data[1] & 0x02); - input_report_key(dev, BTN_STYLUS2, data[1] & 0x10); - - input_sync(dev); - - exit: - retval = usb_submit_urb (urb, GFP_ATOMIC); - if (retval) - err ("%s - usb_submit_urb failed with result %d", - __FUNCTION__, retval); -} - -static void wacom_penpartner_irq(struct urb *urb, struct pt_regs *regs) -{ - struct wacom *wacom = urb->context; - unsigned char *data = wacom->data; - struct input_dev *dev = wacom->dev; - int retval; - - switch (urb->status) { - case 0: - /* success */ - break; - case -ECONNRESET: - case -ENOENT: - case -ESHUTDOWN: - /* this urb is terminated, clean up */ - dbg("%s - urb shutting down with status: %d", __FUNCTION__, urb->status); - return; - default: - dbg("%s - nonzero urb status received: %d", __FUNCTION__, urb->status); - goto exit; - } - - if (data[0] != 2) { - printk(KERN_INFO "wacom_penpartner_irq: received unknown report #%d\n", data[0]); - goto exit; - } - - input_regs(dev, regs); - input_report_key(dev, BTN_TOOL_PEN, 1); - input_report_abs(dev, ABS_MISC, STYLUS_DEVICE_ID); /* report tool id */ - input_report_abs(dev, ABS_X, le16_to_cpu(*(__le16 *) &data[1])); - input_report_abs(dev, ABS_Y, le16_to_cpu(*(__le16 *) &data[3])); - input_report_abs(dev, ABS_PRESSURE, (signed char)data[6] + 127); - input_report_key(dev, BTN_TOUCH, ((signed char)data[6] > -80) && !(data[5] & 0x20)); - input_report_key(dev, BTN_STYLUS, (data[5] & 0x40)); - input_sync(dev); - - exit: - retval = usb_submit_urb (urb, GFP_ATOMIC); - if (retval) - err ("%s - usb_submit_urb failed with result %d", - __FUNCTION__, retval); -} - -static void wacom_graphire_irq(struct urb *urb, struct pt_regs *regs) -{ - struct wacom *wacom = urb->context; - unsigned char *data = wacom->data; - struct input_dev *dev = wacom->dev; - int x, y, id, rw; - int retval; - - switch (urb->status) { - case 0: - /* success */ - break; - case -ECONNRESET: - case -ENOENT: - case -ESHUTDOWN: - /* this urb is terminated, clean up */ - dbg("%s - urb shutting down with status: %d", __FUNCTION__, urb->status); - return; - default: - dbg("%s - nonzero urb status received: %d", __FUNCTION__, urb->status); - goto exit; - } - - if (data[0] == 99) return; /* for Volito tablets */ - - if (data[0] != 2) { - dbg("wacom_graphire_irq: received unknown report #%d", data[0]); - goto exit; - } - - input_regs(dev, regs); - - id = STYLUS_DEVICE_ID; - if (data[1] & 0x10) { /* in prox */ - - switch ((data[1] >> 5) & 3) { - - case 0: /* Pen */ - wacom->tool[0] = BTN_TOOL_PEN; - break; - - case 1: /* Rubber */ - wacom->tool[0] = BTN_TOOL_RUBBER; - id = ERASER_DEVICE_ID; - break; - - case 2: /* Mouse with wheel */ - input_report_key(dev, BTN_MIDDLE, data[1] & 0x04); - if (wacom->features->type == WACOM_G4) { - rw = data[7] & 0x04 ? (data[7] & 0x03)-4 : (data[7] & 0x03); - input_report_rel(dev, REL_WHEEL, -rw); - } else - input_report_rel(dev, REL_WHEEL, -(signed char) data[6]); - /* fall through */ - - case 3: /* Mouse without wheel */ - wacom->tool[0] = BTN_TOOL_MOUSE; - id = CURSOR_DEVICE_ID; - input_report_key(dev, BTN_LEFT, data[1] & 0x01); - input_report_key(dev, BTN_RIGHT, data[1] & 0x02); - if (wacom->features->type == WACOM_G4) - input_report_abs(dev, ABS_DISTANCE, data[6]); - else - input_report_abs(dev, ABS_DISTANCE, data[7]); - break; - } - } - - if (data[1] & 0x90) { - x = le16_to_cpu(*(__le16 *) &data[2]); - y = le16_to_cpu(*(__le16 *) &data[4]); - input_report_abs(dev, ABS_X, x); - input_report_abs(dev, ABS_Y, y); - if (wacom->tool[0] != BTN_TOOL_MOUSE) { - input_report_abs(dev, ABS_PRESSURE, data[6] | ((data[7] & 0x01) << 8)); - input_report_key(dev, BTN_TOUCH, data[1] & 0x01); - input_report_key(dev, BTN_STYLUS, data[1] & 0x02); - input_report_key(dev, BTN_STYLUS2, data[1] & 0x04); - } - } - - if (data[1] & 0x10) - input_report_abs(dev, ABS_MISC, id); /* report tool id */ - else - input_report_abs(dev, ABS_MISC, 0); /* reset tool id */ - input_report_key(dev, wacom->tool[0], data[1] & 0x10); - input_sync(dev); - - /* send pad data */ - if (wacom->features->type == WACOM_G4) { - if ((wacom->serial[1] & 0xc0) != (data[7] & 0xf8)) { - wacom->id[1] = 1; - wacom->serial[1] = (data[7] & 0xf8); - input_report_key(dev, BTN_0, (data[7] & 0x40)); - input_report_key(dev, BTN_4, (data[7] & 0x80)); - rw = ((data[7] & 0x18) >> 3) - ((data[7] & 0x20) >> 3); - input_report_rel(dev, REL_WHEEL, rw); - input_report_key(dev, BTN_TOOL_FINGER, 0xf0); - input_event(dev, EV_MSC, MSC_SERIAL, 0xf0); - } else if (wacom->id[1]) { - wacom->id[1] = 0; - input_report_key(dev, BTN_TOOL_FINGER, 0); - input_event(dev, EV_MSC, MSC_SERIAL, 0xf0); - } - input_sync(dev); - } - exit: - retval = usb_submit_urb (urb, GFP_ATOMIC); - if (retval) - err ("%s - usb_submit_urb failed with result %d", - __FUNCTION__, retval); -} - -static int wacom_intuos_inout(struct urb *urb) -{ - struct wacom *wacom = urb->context; - unsigned char *data = wacom->data; - struct input_dev *dev = wacom->dev; - int idx; - - /* tool number */ - idx = data[1] & 0x01; - - /* Enter report */ - if ((data[1] & 0xfc) == 0xc0) { - /* serial number of the tool */ - wacom->serial[idx] = ((data[3] & 0x0f) << 28) + - (data[4] << 20) + (data[5] << 12) + - (data[6] << 4) + (data[7] >> 4); - - wacom->id[idx] = (data[2] << 4) | (data[3] >> 4); - switch (wacom->id[idx]) { - case 0x812: /* Inking pen */ - case 0x801: /* Intuos3 Inking pen */ - case 0x012: - wacom->tool[idx] = BTN_TOOL_PENCIL; - break; - case 0x822: /* Pen */ - case 0x842: - case 0x852: - case 0x823: /* Intuos3 Grip Pen */ - case 0x813: /* Intuos3 Classic Pen */ - case 0x885: /* Intuos3 Marker Pen */ - case 0x022: - wacom->tool[idx] = BTN_TOOL_PEN; - break; - case 0x832: /* Stroke pen */ - case 0x032: - wacom->tool[idx] = BTN_TOOL_BRUSH; - break; - case 0x007: /* Mouse 4D and 2D */ - case 0x09c: - case 0x094: - case 0x017: /* Intuos3 2D Mouse */ - wacom->tool[idx] = BTN_TOOL_MOUSE; - break; - case 0x096: /* Lens cursor */ - case 0x097: /* Intuos3 Lens cursor */ - wacom->tool[idx] = BTN_TOOL_LENS; - break; - case 0x82a: /* Eraser */ - case 0x85a: - case 0x91a: - case 0xd1a: - case 0x0fa: - case 0x82b: /* Intuos3 Grip Pen Eraser */ - case 0x81b: /* Intuos3 Classic Pen Eraser */ - case 0x91b: /* Intuos3 Airbrush Eraser */ - wacom->tool[idx] = BTN_TOOL_RUBBER; - break; - case 0xd12: - case 0x912: - case 0x112: - case 0x913: /* Intuos3 Airbrush */ - wacom->tool[idx] = BTN_TOOL_AIRBRUSH; - break; - default: /* Unknown tool */ - wacom->tool[idx] = BTN_TOOL_PEN; - } - if(!((wacom->tool[idx] == BTN_TOOL_LENS) && - ((wacom->features->type == INTUOS312) - || (wacom->features->type == INTUOS319)))) { - input_report_abs(dev, ABS_MISC, wacom->id[idx]); /* report tool id */ - input_report_key(dev, wacom->tool[idx], 1); - input_event(dev, EV_MSC, MSC_SERIAL, wacom->serial[idx]); - input_sync(dev); - } - return 1; - } - - /* Exit report */ - if ((data[1] & 0xfe) == 0x80) { - input_report_key(dev, wacom->tool[idx], 0); - input_report_abs(dev, ABS_MISC, 0); /* reset tool id */ - input_event(dev, EV_MSC, MSC_SERIAL, wacom->serial[idx]); - input_sync(dev); - return 1; - } - - if((wacom->tool[idx] == BTN_TOOL_LENS) && ((wacom->features->type == INTUOS312) - || (wacom->features->type == INTUOS319))) - return 1; - else - return 0; -} - -static void wacom_intuos_general(struct urb *urb) -{ - struct wacom *wacom = urb->context; - unsigned char *data = wacom->data; - struct input_dev *dev = wacom->dev; - unsigned int t; - - /* general pen packet */ - if ((data[1] & 0xb8) == 0xa0) { - t = (data[6] << 2) | ((data[7] >> 6) & 3); - input_report_abs(dev, ABS_PRESSURE, t); - input_report_abs(dev, ABS_TILT_X, - ((data[7] << 1) & 0x7e) | (data[8] >> 7)); - input_report_abs(dev, ABS_TILT_Y, data[8] & 0x7f); - input_report_key(dev, BTN_STYLUS, data[1] & 2); - input_report_key(dev, BTN_STYLUS2, data[1] & 4); - input_report_key(dev, BTN_TOUCH, t > 10); - } - - /* airbrush second packet */ - if ((data[1] & 0xbc) == 0xb4) { - input_report_abs(dev, ABS_WHEEL, - (data[6] << 2) | ((data[7] >> 6) & 3)); - input_report_abs(dev, ABS_TILT_X, - ((data[7] << 1) & 0x7e) | (data[8] >> 7)); - input_report_abs(dev, ABS_TILT_Y, data[8] & 0x7f); - } - return; -} - -static void wacom_intuos_irq(struct urb *urb, struct pt_regs *regs) -{ - struct wacom *wacom = urb->context; - unsigned char *data = wacom->data; - struct input_dev *dev = wacom->dev; - unsigned int t; - int idx; - int retval; - - switch (urb->status) { - case 0: - /* success */ - break; - case -ECONNRESET: - case -ENOENT: - case -ESHUTDOWN: - /* this urb is terminated, clean up */ - dbg("%s - urb shutting down with status: %d", __FUNCTION__, urb->status); - return; - default: - dbg("%s - nonzero urb status received: %d", __FUNCTION__, urb->status); - goto exit; - } - - if (data[0] != 2 && data[0] != 5 && data[0] != 6 && data[0] != 12) { - dbg("wacom_intuos_irq: received unknown report #%d", data[0]); - goto exit; - } - - input_regs(dev, regs); - - /* tool number */ - idx = data[1] & 0x01; - - /* pad packets. Works as a second tool and is always in prox */ - if (data[0] == 12) { - /* initiate the pad as a device */ - if (wacom->tool[1] != BTN_TOOL_FINGER) - wacom->tool[1] = BTN_TOOL_FINGER; - - input_report_key(dev, BTN_0, (data[5] & 0x01)); - input_report_key(dev, BTN_1, (data[5] & 0x02)); - input_report_key(dev, BTN_2, (data[5] & 0x04)); - input_report_key(dev, BTN_3, (data[5] & 0x08)); - input_report_key(dev, BTN_4, (data[6] & 0x01)); - input_report_key(dev, BTN_5, (data[6] & 0x02)); - input_report_key(dev, BTN_6, (data[6] & 0x04)); - input_report_key(dev, BTN_7, (data[6] & 0x08)); - input_report_abs(dev, ABS_RX, ((data[1] & 0x1f) << 8) | data[2]); - input_report_abs(dev, ABS_RY, ((data[3] & 0x1f) << 8) | data[4]); - - if((data[5] & 0x0f) | (data[6] & 0x0f) | (data[1] & 0x1f) | data[2]) - input_report_key(dev, wacom->tool[1], 1); - else - input_report_key(dev, wacom->tool[1], 0); - input_event(dev, EV_MSC, MSC_SERIAL, 0xffffffff); - input_sync(dev); - goto exit; - } - - /* process in/out prox events */ - if (wacom_intuos_inout(urb)) - goto exit; - - /* Cintiq doesn't send data when RDY bit isn't set */ - if ((wacom->features->type == CINTIQ) && !(data[1] & 0x40)) - goto exit; - - if (wacom->features->type >= INTUOS3) { - input_report_abs(dev, ABS_X, (data[2] << 9) | (data[3] << 1) | ((data[9] >> 1) & 1)); - input_report_abs(dev, ABS_Y, (data[4] << 9) | (data[5] << 1) | (data[9] & 1)); - input_report_abs(dev, ABS_DISTANCE, ((data[9] >> 2) & 0x3f)); - } else { - input_report_abs(dev, ABS_X, be16_to_cpu(*(__be16 *) &data[2])); - input_report_abs(dev, ABS_Y, be16_to_cpu(*(__be16 *) &data[4])); - input_report_abs(dev, ABS_DISTANCE, ((data[9] >> 3) & 0x1f)); - } - - /* process general packets */ - wacom_intuos_general(urb); - - /* 4D mouse, 2D mouse, marker pen rotation, or Lens cursor packets */ - if ((data[1] & 0xbc) == 0xa8 || (data[1] & 0xbe) == 0xb0) { - - if (data[1] & 0x02) { - /* Rotation packet */ - if (wacom->features->type >= INTUOS3) { - /* I3 marker pen rotation reported as wheel - * due to valuator limitation - */ - t = (data[6] << 3) | ((data[7] >> 5) & 7); - t = (data[7] & 0x20) ? ((t > 900) ? ((t-1) / 2 - 1350) : - ((t-1) / 2 + 450)) : (450 - t / 2) ; - input_report_abs(dev, ABS_WHEEL, t); - } else { - /* 4D mouse rotation packet */ - t = (data[6] << 3) | ((data[7] >> 5) & 7); - input_report_abs(dev, ABS_RZ, (data[7] & 0x20) ? - ((t - 1) / 2) : -t / 2); - } - - } else if (!(data[1] & 0x10) && wacom->features->type < INTUOS3) { - /* 4D mouse packet */ - input_report_key(dev, BTN_LEFT, data[8] & 0x01); - input_report_key(dev, BTN_MIDDLE, data[8] & 0x02); - input_report_key(dev, BTN_RIGHT, data[8] & 0x04); - - input_report_key(dev, BTN_SIDE, data[8] & 0x20); - input_report_key(dev, BTN_EXTRA, data[8] & 0x10); - t = (data[6] << 2) | ((data[7] >> 6) & 3); - input_report_abs(dev, ABS_THROTTLE, (data[8] & 0x08) ? -t : t); - - } else if (wacom->tool[idx] == BTN_TOOL_MOUSE) { - /* 2D mouse packet */ - input_report_key(dev, BTN_LEFT, data[8] & 0x04); - input_report_key(dev, BTN_MIDDLE, data[8] & 0x08); - input_report_key(dev, BTN_RIGHT, data[8] & 0x10); - input_report_rel(dev, REL_WHEEL, (data[8] & 0x01) - - ((data[8] & 0x02) >> 1)); - - /* I3 2D mouse side buttons */ - if (wacom->features->type == INTUOS3) { - input_report_key(dev, BTN_SIDE, data[8] & 0x40); - input_report_key(dev, BTN_EXTRA, data[8] & 0x20); - } - - } else if (wacom->features->type < INTUOS3) { - /* Lens cursor packets */ - input_report_key(dev, BTN_LEFT, data[8] & 0x01); - input_report_key(dev, BTN_MIDDLE, data[8] & 0x02); - input_report_key(dev, BTN_RIGHT, data[8] & 0x04); - input_report_key(dev, BTN_SIDE, data[8] & 0x10); - input_report_key(dev, BTN_EXTRA, data[8] & 0x08); - } - } - - input_report_abs(dev, ABS_MISC, wacom->id[idx]); /* report tool id */ - input_report_key(dev, wacom->tool[idx], 1); - input_event(dev, EV_MSC, MSC_SERIAL, wacom->serial[idx]); - input_sync(dev); - -exit: - retval = usb_submit_urb (urb, GFP_ATOMIC); - if (retval) - err ("%s - usb_submit_urb failed with result %d", - __FUNCTION__, retval); -} - -static struct wacom_features wacom_features[] = { - { "Wacom Penpartner", 7, 5040, 3780, 255, 32, PENPARTNER, wacom_penpartner_irq }, - { "Wacom Graphire", 8, 10206, 7422, 511, 32, GRAPHIRE, wacom_graphire_irq }, - { "Wacom Graphire2 4x5", 8, 10206, 7422, 511, 32, GRAPHIRE, wacom_graphire_irq }, - { "Wacom Graphire2 5x7", 8, 13918, 10206, 511, 32, GRAPHIRE, wacom_graphire_irq }, - { "Wacom Graphire3", 8, 10208, 7424, 511, 32, GRAPHIRE, wacom_graphire_irq }, - { "Wacom Graphire3 6x8", 8, 16704, 12064, 511, 32, GRAPHIRE, wacom_graphire_irq }, - { "Wacom Graphire4 4x5", 8, 10208, 7424, 511, 32, WACOM_G4, wacom_graphire_irq }, - { "Wacom Graphire4 6x8", 8, 16704, 12064, 511, 32, WACOM_G4, wacom_graphire_irq }, - { "Wacom Volito", 8, 5104, 3712, 511, 32, GRAPHIRE, wacom_graphire_irq }, - { "Wacom PenStation2", 8, 3250, 2320, 255, 32, GRAPHIRE, wacom_graphire_irq }, - { "Wacom Volito2 4x5", 8, 5104, 3712, 511, 32, GRAPHIRE, wacom_graphire_irq }, - { "Wacom Volito2 2x3", 8, 3248, 2320, 511, 32, GRAPHIRE, wacom_graphire_irq }, - { "Wacom PenPartner2", 8, 3250, 2320, 255, 32, GRAPHIRE, wacom_graphire_irq }, - { "Wacom Intuos 4x5", 10, 12700, 10600, 1023, 15, INTUOS, wacom_intuos_irq }, - { "Wacom Intuos 6x8", 10, 20320, 16240, 1023, 15, INTUOS, wacom_intuos_irq }, - { "Wacom Intuos 9x12", 10, 30480, 24060, 1023, 15, INTUOS, wacom_intuos_irq }, - { "Wacom Intuos 12x12", 10, 30480, 31680, 1023, 15, INTUOS, wacom_intuos_irq }, - { "Wacom Intuos 12x18", 10, 45720, 31680, 1023, 15, INTUOS, wacom_intuos_irq }, - { "Wacom PL400", 8, 5408, 4056, 255, 32, PL, wacom_pl_irq }, - { "Wacom PL500", 8, 6144, 4608, 255, 32, PL, wacom_pl_irq }, - { "Wacom PL600", 8, 6126, 4604, 255, 32, PL, wacom_pl_irq }, - { "Wacom PL600SX", 8, 6260, 5016, 255, 32, PL, wacom_pl_irq }, - { "Wacom PL550", 8, 6144, 4608, 511, 32, PL, wacom_pl_irq }, - { "Wacom PL800", 8, 7220, 5780, 511, 32, PL, wacom_pl_irq }, - { "Wacom PL700", 8, 6758, 5406, 511, 32, PL, wacom_pl_irq }, - { "Wacom PL510", 8, 6282, 4762, 511, 32, PL, wacom_pl_irq }, - { "Wacom DTU710", 8, 34080, 27660, 511, 32, PL, wacom_pl_irq }, - { "Wacom DTF521", 8, 6282, 4762, 511, 32, PL, wacom_pl_irq }, - { "Wacom DTF720", 8, 6858, 5506, 511, 32, PL, wacom_pl_irq }, - { "Wacom Cintiq Partner",8, 20480, 15360, 511, 32, PL, wacom_ptu_irq }, - { "Wacom Intuos2 4x5", 10, 12700, 10600, 1023, 15, INTUOS, wacom_intuos_irq }, - { "Wacom Intuos2 6x8", 10, 20320, 16240, 1023, 15, INTUOS, wacom_intuos_irq }, - { "Wacom Intuos2 9x12", 10, 30480, 24060, 1023, 15, INTUOS, wacom_intuos_irq }, - { "Wacom Intuos2 12x12", 10, 30480, 31680, 1023, 15, INTUOS, wacom_intuos_irq }, - { "Wacom Intuos2 12x18", 10, 45720, 31680, 1023, 15, INTUOS, wacom_intuos_irq }, - { "Wacom Intuos3 4x5", 10, 25400, 20320, 1023, 15, INTUOS3, wacom_intuos_irq }, - { "Wacom Intuos3 6x8", 10, 40640, 30480, 1023, 15, INTUOS3, wacom_intuos_irq }, - { "Wacom Intuos3 9x12", 10, 60960, 45720, 1023, 15, INTUOS3, wacom_intuos_irq }, - { "Wacom Intuos3 12x12", 10, 60960, 60960, 1023, 15, INTUOS312, wacom_intuos_irq }, - { "Wacom Intuos3 12x19", 10, 97536, 60960, 1023, 15, INTUOS319, wacom_intuos_irq }, - { "Wacom Intuos3 6x11", 10, 54204, 31750, 1023, 15, INTUOS3, wacom_intuos_irq }, - { "Wacom Cintiq 21UX", 10, 87200, 65600, 1023, 15, CINTIQ, wacom_intuos_irq }, - { "Wacom Intuos2 6x8", 10, 20320, 16240, 1023, 15, INTUOS, wacom_intuos_irq }, - { } -}; - -static struct usb_device_id wacom_ids[] = { - { USB_DEVICE(USB_VENDOR_ID_WACOM, 0x00) }, - { USB_DEVICE(USB_VENDOR_ID_WACOM, 0x10) }, - { USB_DEVICE(USB_VENDOR_ID_WACOM, 0x11) }, - { USB_DEVICE(USB_VENDOR_ID_WACOM, 0x12) }, - { USB_DEVICE(USB_VENDOR_ID_WACOM, 0x13) }, - { USB_DEVICE(USB_VENDOR_ID_WACOM, 0x14) }, - { USB_DEVICE(USB_VENDOR_ID_WACOM, 0x15) }, - { USB_DEVICE(USB_VENDOR_ID_WACOM, 0x16) }, - { USB_DEVICE(USB_VENDOR_ID_WACOM, 0x60) }, - { USB_DEVICE(USB_VENDOR_ID_WACOM, 0x61) }, - { USB_DEVICE(USB_VENDOR_ID_WACOM, 0x62) }, - { USB_DEVICE(USB_VENDOR_ID_WACOM, 0x63) }, - { USB_DEVICE(USB_VENDOR_ID_WACOM, 0x64) }, - { USB_DEVICE(USB_VENDOR_ID_WACOM, 0x20) }, - { USB_DEVICE(USB_VENDOR_ID_WACOM, 0x21) }, - { USB_DEVICE(USB_VENDOR_ID_WACOM, 0x22) }, - { USB_DEVICE(USB_VENDOR_ID_WACOM, 0x23) }, - { USB_DEVICE(USB_VENDOR_ID_WACOM, 0x24) }, - { USB_DEVICE(USB_VENDOR_ID_WACOM, 0x30) }, - { USB_DEVICE(USB_VENDOR_ID_WACOM, 0x31) }, - { USB_DEVICE(USB_VENDOR_ID_WACOM, 0x32) }, - { USB_DEVICE(USB_VENDOR_ID_WACOM, 0x33) }, - { USB_DEVICE(USB_VENDOR_ID_WACOM, 0x34) }, - { USB_DEVICE(USB_VENDOR_ID_WACOM, 0x35) }, - { USB_DEVICE(USB_VENDOR_ID_WACOM, 0x37) }, - { USB_DEVICE(USB_VENDOR_ID_WACOM, 0x38) }, - { USB_DEVICE(USB_VENDOR_ID_WACOM, 0x39) }, - { USB_DEVICE(USB_VENDOR_ID_WACOM, 0xC0) }, - { USB_DEVICE(USB_VENDOR_ID_WACOM, 0xC3) }, - { USB_DEVICE(USB_VENDOR_ID_WACOM, 0x03) }, - { USB_DEVICE(USB_VENDOR_ID_WACOM, 0x41) }, - { USB_DEVICE(USB_VENDOR_ID_WACOM, 0x42) }, - { USB_DEVICE(USB_VENDOR_ID_WACOM, 0x43) }, - { USB_DEVICE(USB_VENDOR_ID_WACOM, 0x44) }, - { USB_DEVICE(USB_VENDOR_ID_WACOM, 0x45) }, - { USB_DEVICE(USB_VENDOR_ID_WACOM, 0xB0) }, - { USB_DEVICE(USB_VENDOR_ID_WACOM, 0xB1) }, - { USB_DEVICE(USB_VENDOR_ID_WACOM, 0xB2) }, - { USB_DEVICE(USB_VENDOR_ID_WACOM, 0xB3) }, - { USB_DEVICE(USB_VENDOR_ID_WACOM, 0xB4) }, - { USB_DEVICE(USB_VENDOR_ID_WACOM, 0xB5) }, - { USB_DEVICE(USB_VENDOR_ID_WACOM, 0x3F) }, - { USB_DEVICE(USB_VENDOR_ID_WACOM, 0x47) }, - { } -}; - -MODULE_DEVICE_TABLE(usb, wacom_ids); - -static int wacom_open(struct input_dev *dev) -{ - struct wacom *wacom = dev->private; - - wacom->irq->dev = wacom->usbdev; - if (usb_submit_urb(wacom->irq, GFP_KERNEL)) - return -EIO; - - return 0; -} - -static void wacom_close(struct input_dev *dev) -{ - struct wacom *wacom = dev->private; - - usb_kill_urb(wacom->irq); -} - -static int wacom_probe(struct usb_interface *intf, const struct usb_device_id *id) -{ - struct usb_device *dev = interface_to_usbdev(intf); - struct usb_endpoint_descriptor *endpoint; - struct wacom *wacom; - struct input_dev *input_dev; - char rep_data[2], limit = 0; - - wacom = kzalloc(sizeof(struct wacom), GFP_KERNEL); - input_dev = input_allocate_device(); - if (!wacom || !input_dev) - goto fail1; - - wacom->data = usb_buffer_alloc(dev, 10, GFP_KERNEL, &wacom->data_dma); - if (!wacom->data) - goto fail1; - - wacom->irq = usb_alloc_urb(0, GFP_KERNEL); - if (!wacom->irq) - goto fail2; - - wacom->usbdev = dev; - wacom->dev = input_dev; - usb_make_path(dev, wacom->phys, sizeof(wacom->phys)); - strlcat(wacom->phys, "/input0", sizeof(wacom->phys)); - - wacom->features = wacom_features + (id - wacom_ids); - if (wacom->features->pktlen > 10) - BUG(); - - input_dev->name = wacom->features->name; - usb_to_input_id(dev, &input_dev->id); - - input_dev->cdev.dev = &intf->dev; - input_dev->private = wacom; - input_dev->open = wacom_open; - input_dev->close = wacom_close; - - input_dev->evbit[0] |= BIT(EV_KEY) | BIT(EV_ABS); - input_dev->keybit[LONG(BTN_DIGI)] |= BIT(BTN_TOOL_PEN) | BIT(BTN_TOUCH) | BIT(BTN_STYLUS); - input_set_abs_params(input_dev, ABS_X, 0, wacom->features->x_max, 4, 0); - input_set_abs_params(input_dev, ABS_Y, 0, wacom->features->y_max, 4, 0); - input_set_abs_params(input_dev, ABS_PRESSURE, 0, wacom->features->pressure_max, 0, 0); - input_dev->absbit[LONG(ABS_MISC)] |= BIT(ABS_MISC); - - switch (wacom->features->type) { - case WACOM_G4: - input_dev->evbit[0] |= BIT(EV_MSC); - input_dev->mscbit[0] |= BIT(MSC_SERIAL); - input_dev->keybit[LONG(BTN_DIGI)] |= BIT(BTN_TOOL_FINGER); - input_dev->keybit[LONG(BTN_LEFT)] |= BIT(BTN_0) | BIT(BTN_1) | BIT(BTN_2) | BIT(BTN_3) | BIT(BTN_4) | BIT(BTN_5) | BIT(BTN_6) | BIT(BTN_7); - /* fall through */ - - case GRAPHIRE: - input_dev->evbit[0] |= BIT(EV_REL); - input_dev->relbit[0] |= BIT(REL_WHEEL); - input_dev->keybit[LONG(BTN_LEFT)] |= BIT(BTN_LEFT) | BIT(BTN_RIGHT) | BIT(BTN_MIDDLE); - input_dev->keybit[LONG(BTN_DIGI)] |= BIT(BTN_TOOL_RUBBER) | BIT(BTN_TOOL_MOUSE) | BIT(BTN_STYLUS2); - input_set_abs_params(input_dev, ABS_DISTANCE, 0, wacom->features->distance_max, 0, 0); - break; - - case INTUOS3: - case INTUOS312: - case INTUOS319: - case CINTIQ: - input_dev->keybit[LONG(BTN_DIGI)] |= BIT(BTN_TOOL_FINGER); - input_dev->keybit[LONG(BTN_LEFT)] |= BIT(BTN_0) | BIT(BTN_1) | BIT(BTN_2) | BIT(BTN_3) | BIT(BTN_4) | BIT(BTN_5) | BIT(BTN_6) | BIT(BTN_7); - input_set_abs_params(input_dev, ABS_RX, 0, 4097, 0, 0); - input_set_abs_params(input_dev, ABS_RY, 0, 4097, 0, 0); - /* fall through */ - - case INTUOS: - input_dev->evbit[0] |= BIT(EV_MSC) | BIT(EV_REL); - input_dev->mscbit[0] |= BIT(MSC_SERIAL); - input_dev->relbit[0] |= BIT(REL_WHEEL); - input_dev->keybit[LONG(BTN_LEFT)] |= BIT(BTN_LEFT) | BIT(BTN_RIGHT) | BIT(BTN_MIDDLE) | BIT(BTN_SIDE) | BIT(BTN_EXTRA); - input_dev->keybit[LONG(BTN_DIGI)] |= BIT(BTN_TOOL_RUBBER) | BIT(BTN_TOOL_MOUSE) | BIT(BTN_TOOL_BRUSH) - | BIT(BTN_TOOL_PENCIL) | BIT(BTN_TOOL_AIRBRUSH) | BIT(BTN_TOOL_LENS) | BIT(BTN_STYLUS2); - input_set_abs_params(input_dev, ABS_DISTANCE, 0, wacom->features->distance_max, 0, 0); - input_set_abs_params(input_dev, ABS_WHEEL, 0, 1023, 0, 0); - input_set_abs_params(input_dev, ABS_TILT_X, 0, 127, 0, 0); - input_set_abs_params(input_dev, ABS_TILT_Y, 0, 127, 0, 0); - input_set_abs_params(input_dev, ABS_RZ, -900, 899, 0, 0); - input_set_abs_params(input_dev, ABS_THROTTLE, -1023, 1023, 0, 0); - break; - - case PL: - input_dev->keybit[LONG(BTN_DIGI)] |= BIT(BTN_STYLUS2) | BIT(BTN_TOOL_RUBBER); - break; - } - - endpoint = &intf->cur_altsetting->endpoint[0].desc; - - if (wacom->features->pktlen > 10) - BUG(); - - usb_fill_int_urb(wacom->irq, dev, - usb_rcvintpipe(dev, endpoint->bEndpointAddress), - wacom->data, wacom->features->pktlen, - wacom->features->irq, wacom, endpoint->bInterval); - wacom->irq->transfer_dma = wacom->data_dma; - wacom->irq->transfer_flags |= URB_NO_TRANSFER_DMA_MAP; - - input_register_device(wacom->dev); - - /* Ask the tablet to report tablet data. Repeat until it succeeds */ - do { - rep_data[0] = 2; - rep_data[1] = 2; - usb_set_report(intf, 3, 2, rep_data, 2); - usb_get_report(intf, 3, 2, rep_data, 2); - } while (rep_data[1] != 2 && limit++ < 5); - - usb_set_intfdata(intf, wacom); - return 0; - -fail2: usb_buffer_free(dev, 10, wacom->data, wacom->data_dma); -fail1: input_free_device(input_dev); - kfree(wacom); - return -ENOMEM; -} - -static void wacom_disconnect(struct usb_interface *intf) -{ - struct wacom *wacom = usb_get_intfdata (intf); - - usb_set_intfdata(intf, NULL); - if (wacom) { - usb_kill_urb(wacom->irq); - input_unregister_device(wacom->dev); - usb_free_urb(wacom->irq); - usb_buffer_free(interface_to_usbdev(intf), 10, wacom->data, wacom->data_dma); - kfree(wacom); - } -} - -static struct usb_driver wacom_driver = { - .name = "wacom", - .probe = wacom_probe, - .disconnect = wacom_disconnect, - .id_table = wacom_ids, -}; - -static int __init wacom_init(void) -{ - int result = usb_register(&wacom_driver); - if (result == 0) - info(DRIVER_VERSION ":" DRIVER_DESC); - return result; -} - -static void __exit wacom_exit(void) -{ - usb_deregister(&wacom_driver); -} - -module_init(wacom_init); -module_exit(wacom_exit); diff --git a/drivers/usb/input/wacom.h b/drivers/usb/input/wacom.h new file mode 100644 index 00000000000..832737b658c --- /dev/null +++ b/drivers/usb/input/wacom.h @@ -0,0 +1,132 @@ +/* + * drivers/usb/input/wacom.h + * + * USB Wacom Graphire and Wacom Intuos tablet support + * + * Copyright (c) 2000-2004 Vojtech Pavlik <vojtech@ucw.cz> + * Copyright (c) 2000 Andreas Bach Aaen <abach@stofanet.dk> + * Copyright (c) 2000 Clifford Wolf <clifford@clifford.at> + * Copyright (c) 2000 Sam Mosel <sam.mosel@computer.org> + * Copyright (c) 2000 James E. Blair <corvus@gnu.org> + * Copyright (c) 2000 Daniel Egger <egger@suse.de> + * Copyright (c) 2001 Frederic Lepied <flepied@mandrakesoft.com> + * Copyright (c) 2004 Panagiotis Issaris <panagiotis.issaris@mech.kuleuven.ac.be> + * Copyright (c) 2002-2006 Ping Cheng <pingc@wacom.com> + * + * ChangeLog: + * v0.1 (vp) - Initial release + * v0.2 (aba) - Support for all buttons / combinations + * v0.3 (vp) - Support for Intuos added + * v0.4 (sm) - Support for more Intuos models, menustrip + * relative mode, proximity. + * v0.5 (vp) - Big cleanup, nifty features removed, + * they belong in userspace + * v1.8 (vp) - Submit URB only when operating, moved to CVS, + * use input_report_key instead of report_btn and + * other cleanups + * v1.11 (vp) - Add URB ->dev setting for new kernels + * v1.11 (jb) - Add support for the 4D Mouse & Lens + * v1.12 (de) - Add support for two more inking pen IDs + * v1.14 (vp) - Use new USB device id probing scheme. + * Fix Wacom Graphire mouse wheel + * v1.18 (vp) - Fix mouse wheel direction + * Make mouse relative + * v1.20 (fl) - Report tool id for Intuos devices + * - Multi tools support + * - Corrected Intuos protocol decoding (airbrush, 4D mouse, lens cursor...) + * - Add PL models support + * - Fix Wacom Graphire mouse wheel again + * v1.21 (vp) - Removed protocol descriptions + * - Added MISC_SERIAL for tool serial numbers + * (gb) - Identify version on module load. + * v1.21.1 (fl) - added Graphire2 support + * v1.21.2 (fl) - added Intuos2 support + * - added all the PL ids + * v1.21.3 (fl) - added another eraser id from Neil Okamoto + * - added smooth filter for Graphire from Peri Hankey + * - added PenPartner support from Olaf van Es + * - new tool ids from Ole Martin Bjoerndalen + * v1.29 (pc) - Add support for more tablets + * - Fix pressure reporting + * v1.30 (vp) - Merge 2.4 and 2.5 drivers + * - Since 2.5 now has input_sync(), remove MSC_SERIAL abuse + * - Cleanups here and there + * v1.30.1 (pi) - Added Graphire3 support + * v1.40 (pc) - Add support for several new devices, fix eraser reporting, ... + * v1.43 (pc) - Added support for Cintiq 21UX + * - Fixed a Graphire bug + * - Merged wacom_intuos3_irq into wacom_intuos_irq + * v1.44 (pc) - Added support for Graphire4, Cintiq 710, Intuos3 6x11, etc. + * - Report Device IDs + * v1.45 (pc) - Added support for DTF 521, Intuos3 12x12 and 12x19 + * - Minor data report fix + * v1.46 (pc) - Split wacom.c into wacom_sys.c and wacom_wac.c, + * - where wacom_sys.c deals with system specific code, + * - and wacom_wac.c deals with Wacom specific code + */ + +/* + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + */ +#ifndef WACOM_H +#define WACOM_H +#include <linux/kernel.h> +#include <linux/slab.h> +#include <linux/module.h> +#include <linux/init.h> +#include <linux/usb/input.h> +#include <asm/unaligned.h> + +/* + * Version Information + */ +#define DRIVER_VERSION "v1.46" +#define DRIVER_AUTHOR "Vojtech Pavlik <vojtech@ucw.cz>" +#define DRIVER_DESC "USB Wacom Graphire and Wacom Intuos tablet driver" +#define DRIVER_LICENSE "GPL" + +MODULE_AUTHOR(DRIVER_AUTHOR); +MODULE_DESCRIPTION(DRIVER_DESC); +MODULE_LICENSE(DRIVER_LICENSE); + +#define USB_VENDOR_ID_WACOM 0x056a + +struct wacom { + dma_addr_t data_dma; + struct input_dev *dev; + struct usb_device *usbdev; + struct urb *irq; + struct wacom_wac * wacom_wac; + char phys[32]; +}; + +struct wacom_combo { + struct wacom * wacom; + struct urb * urb; + struct pt_regs *regs; +}; + +extern int wacom_wac_irq(struct wacom_wac * wacom_wac, void * wcombo); +extern void wacom_sys_irq(struct urb *urb, struct pt_regs *regs); +extern void wacom_report_abs(void *wcombo, unsigned int abs_type, int abs_data); +extern void wacom_report_rel(void *wcombo, unsigned int rel_type, int rel_data); +extern void wacom_report_key(void *wcombo, unsigned int key_type, int key_data); +extern void wacom_input_event(void *wcombo, unsigned int type, unsigned int code, int value); +extern void wacom_input_regs(void *wcombo); +extern void wacom_input_sync(void *wcombo); +extern void wacom_init_input_dev(struct input_dev *input_dev, struct wacom_wac *wacom_wac); +extern void input_dev_g4(struct input_dev *input_dev, struct wacom_wac *wacom_wac); +extern void input_dev_g(struct input_dev *input_dev, struct wacom_wac *wacom_wac); +extern void input_dev_i3(struct input_dev *input_dev, struct wacom_wac *wacom_wac); +extern void input_dev_i(struct input_dev *input_dev, struct wacom_wac *wacom_wac); +extern void input_dev_pl(struct input_dev *input_dev, struct wacom_wac *wacom_wac); +extern void input_dev_pt(struct input_dev *input_dev, struct wacom_wac *wacom_wac); +extern __u16 wacom_le16_to_cpu(unsigned char *data); +extern __u16 wacom_be16_to_cpu(unsigned char *data); +extern struct wacom_features * get_wacom_feature(const struct usb_device_id *id); +extern const struct usb_device_id * get_device_table(void); + +#endif diff --git a/drivers/usb/input/wacom_sys.c b/drivers/usb/input/wacom_sys.c new file mode 100644 index 00000000000..7c3b52bdd9d --- /dev/null +++ b/drivers/usb/input/wacom_sys.c @@ -0,0 +1,315 @@ +/* + * drivers/usb/input/wacom_sys.c + * + * USB Wacom Graphire and Wacom Intuos tablet support - system specific code + */ + +/* + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + */ + +#include "wacom.h" +#include "wacom_wac.h" + +#define USB_REQ_GET_REPORT 0x01 +#define USB_REQ_SET_REPORT 0x09 + +static int usb_get_report(struct usb_interface *intf, unsigned char type, + unsigned char id, void *buf, int size) +{ + return usb_control_msg(interface_to_usbdev(intf), + usb_rcvctrlpipe(interface_to_usbdev(intf), 0), + USB_REQ_GET_REPORT, USB_TYPE_CLASS | USB_RECIP_INTERFACE, + (type << 8) + id, intf->altsetting[0].desc.bInterfaceNumber, + buf, size, 100); +} + +static int usb_set_report(struct usb_interface *intf, unsigned char type, + unsigned char id, void *buf, int size) +{ + return usb_control_msg(interface_to_usbdev(intf), + usb_sndctrlpipe(interface_to_usbdev(intf), 0), + USB_REQ_SET_REPORT, USB_TYPE_CLASS | USB_RECIP_INTERFACE, + (type << 8) + id, intf->altsetting[0].desc.bInterfaceNumber, + buf, size, 1000); +} + +static struct input_dev * get_input_dev(struct wacom_combo *wcombo) +{ + return wcombo->wacom->dev; +} + +void wacom_sys_irq(struct urb *urb, struct pt_regs *regs) +{ + struct wacom *wacom = urb->context; + struct wacom_combo wcombo; + int retval; + + switch (urb->status) { + case 0: + /* success */ + break; + case -ECONNRESET: + case -ENOENT: + case -ESHUTDOWN: + /* this urb is terminated, clean up */ + dbg("%s - urb shutting down with status: %d", __FUNCTION__, urb->status); + return; + default: + dbg("%s - nonzero urb status received: %d", __FUNCTION__, urb->status); + goto exit; + } + + wcombo.wacom = wacom; + wcombo.urb = urb; + wcombo.regs = regs; + + if (wacom_wac_irq(wacom->wacom_wac, (void *)&wcombo)) + input_sync(get_input_dev(&wcombo)); + + exit: + retval = usb_submit_urb (urb, GFP_ATOMIC); + if (retval) + err ("%s - usb_submit_urb failed with result %d", + __FUNCTION__, retval); +} + +void wacom_report_key(void *wcombo, unsigned int key_type, int key_data) +{ + input_report_key(get_input_dev((struct wacom_combo *)wcombo), key_type, key_data); + return; +} + +void wacom_report_abs(void *wcombo, unsigned int abs_type, int abs_data) +{ + input_report_abs(get_input_dev((struct wacom_combo *)wcombo), abs_type, abs_data); + return; +} + +void wacom_report_rel(void *wcombo, unsigned int rel_type, int rel_data) +{ + input_report_rel(get_input_dev((struct wacom_combo *)wcombo), rel_type, rel_data); + return; +} + +void wacom_input_event(void *wcombo, unsigned int type, unsigned int code, int value) +{ + input_event(get_input_dev((struct wacom_combo *)wcombo), type, code, value); + return; +} + +__u16 wacom_be16_to_cpu(unsigned char *data) +{ + __u16 value; + value = be16_to_cpu(*(__be16 *) data); + return value; +} + +__u16 wacom_le16_to_cpu(unsigned char *data) +{ + __u16 value; + value = be16_to_cpu(*(__be16 *) data); + return value; +} + +void wacom_input_regs(void *wcombo) +{ + input_regs(get_input_dev((struct wacom_combo *)wcombo), ((struct wacom_combo *)wcombo)->regs); + return; +} + +void wacom_input_sync(void *wcombo) +{ + input_sync(get_input_dev((struct wacom_combo *)wcombo)); + return; +} + +static int wacom_open(struct input_dev *dev) +{ + struct wacom *wacom = dev->private; + + wacom->irq->dev = wacom->usbdev; + if (usb_submit_urb(wacom->irq, GFP_KERNEL)) + return -EIO; + + return 0; +} + +static void wacom_close(struct input_dev *dev) +{ + struct wacom *wacom = dev->private; + + usb_kill_urb(wacom->irq); +} + +void input_dev_g4(struct input_dev *input_dev, struct wacom_wac *wacom_wac) +{ + input_dev->evbit[0] |= BIT(EV_MSC); + input_dev->mscbit[0] |= BIT(MSC_SERIAL); + input_dev->keybit[LONG(BTN_DIGI)] |= BIT(BTN_TOOL_FINGER); + input_dev->keybit[LONG(BTN_LEFT)] |= BIT(BTN_0) | BIT(BTN_1) | BIT(BTN_2) | BIT(BTN_3) | BIT(BTN_4) | BIT(BTN_5) | BIT(BTN_6) | BIT(BTN_7); +} + +void input_dev_g(struct input_dev *input_dev, struct wacom_wac *wacom_wac) +{ + input_dev->evbit[0] |= BIT(EV_REL); + input_dev->relbit[0] |= BIT(REL_WHEEL); + input_dev->keybit[LONG(BTN_LEFT)] |= BIT(BTN_LEFT) | BIT(BTN_RIGHT) | BIT(BTN_MIDDLE); + input_dev->keybit[LONG(BTN_DIGI)] |= BIT(BTN_TOOL_RUBBER) | BIT(BTN_TOOL_MOUSE) | BIT(BTN_STYLUS2); + input_set_abs_params(input_dev, ABS_DISTANCE, 0, wacom_wac->features->distance_max, 0, 0); +} + +void input_dev_i3(struct input_dev *input_dev, struct wacom_wac *wacom_wac) +{ + input_dev->keybit[LONG(BTN_DIGI)] |= BIT(BTN_TOOL_FINGER); + input_dev->keybit[LONG(BTN_LEFT)] |= BIT(BTN_0) | BIT(BTN_1) | BIT(BTN_2) | BIT(BTN_3) | BIT(BTN_4) | BIT(BTN_5) | BIT(BTN_6) | BIT(BTN_7); + input_set_abs_params(input_dev, ABS_RX, 0, 4097, 0, 0); + input_set_abs_params(input_dev, ABS_RY, 0, 4097, 0, 0); +} + +void input_dev_i(struct input_dev *input_dev, struct wacom_wac *wacom_wac) +{ + input_dev->evbit[0] |= BIT(EV_MSC) | BIT(EV_REL); + input_dev->mscbit[0] |= BIT(MSC_SERIAL); + input_dev->relbit[0] |= BIT(REL_WHEEL); + input_dev->keybit[LONG(BTN_LEFT)] |= BIT(BTN_LEFT) | BIT(BTN_RIGHT) | BIT(BTN_MIDDLE) | BIT(BTN_SIDE) | BIT(BTN_EXTRA); + input_dev->keybit[LONG(BTN_DIGI)] |= BIT(BTN_TOOL_RUBBER) | BIT(BTN_TOOL_MOUSE) | BIT(BTN_TOOL_BRUSH) + | BIT(BTN_TOOL_PENCIL) | BIT(BTN_TOOL_AIRBRUSH) | BIT(BTN_TOOL_LENS) | BIT(BTN_STYLUS2); + input_set_abs_params(input_dev, ABS_DISTANCE, 0, wacom_wac->features->distance_max, 0, 0); + input_set_abs_params(input_dev, ABS_WHEEL, 0, 1023, 0, 0); + input_set_abs_params(input_dev, ABS_TILT_X, 0, 127, 0, 0); + input_set_abs_params(input_dev, ABS_TILT_Y, 0, 127, 0, 0); + input_set_abs_params(input_dev, ABS_RZ, -900, 899, 0, 0); + input_set_abs_params(input_dev, ABS_THROTTLE, -1023, 1023, 0, 0); +} + +void input_dev_pl(struct input_dev *input_dev, struct wacom_wac *wacom_wac) +{ + input_dev->keybit[LONG(BTN_DIGI)] |= BIT(BTN_STYLUS2) | BIT(BTN_TOOL_RUBBER); +} + +void input_dev_pt(struct input_dev *input_dev, struct wacom_wac *wacom_wac) +{ + input_dev->keybit[LONG(BTN_DIGI)] |= BIT(BTN_TOOL_RUBBER); +} + +static int wacom_probe(struct usb_interface *intf, const struct usb_device_id *id) +{ + struct usb_device *dev = interface_to_usbdev(intf); + struct usb_endpoint_descriptor *endpoint; + struct wacom *wacom; + struct wacom_wac *wacom_wac; + struct input_dev *input_dev; + char rep_data[2], limit = 0; + + wacom = kzalloc(sizeof(struct wacom), GFP_KERNEL); + wacom_wac = kzalloc(sizeof(struct wacom_wac), GFP_KERNEL); + input_dev = input_allocate_device(); + if (!wacom || !input_dev || !wacom_wac) + goto fail1; + + wacom_wac->data = usb_buffer_alloc(dev, 10, GFP_KERNEL, &wacom->data_dma); + if (!wacom_wac->data) + goto fail1; + + wacom->irq = usb_alloc_urb(0, GFP_KERNEL); + if (!wacom->irq) + goto fail2; + + wacom->usbdev = dev; + wacom->dev = input_dev; + usb_make_path(dev, wacom->phys, sizeof(wacom->phys)); + strlcat(wacom->phys, "/input0", sizeof(wacom->phys)); + + wacom_wac->features = get_wacom_feature(id); + if (wacom_wac->features->pktlen > 10) + BUG(); + + input_dev->name = wacom_wac->features->name; + wacom->wacom_wac = wacom_wac; + usb_to_input_id(dev, &input_dev->id); + + input_dev->cdev.dev = &intf->dev; + input_dev->private = wacom; + input_dev->open = wacom_open; + input_dev->close = wacom_close; + + input_dev->evbit[0] |= BIT(EV_KEY) | BIT(EV_ABS); + input_dev->keybit[LONG(BTN_DIGI)] |= BIT(BTN_TOOL_PEN) | BIT(BTN_TOUCH) | BIT(BTN_STYLUS); + input_set_abs_params(input_dev, ABS_X, 0, wacom_wac->features->x_max, 4, 0); + input_set_abs_params(input_dev, ABS_Y, 0, wacom_wac->features->y_max, 4, 0); + input_set_abs_params(input_dev, ABS_PRESSURE, 0, wacom_wac->features->pressure_max, 0, 0); + input_dev->absbit[LONG(ABS_MISC)] |= BIT(ABS_MISC); + + wacom_init_input_dev(input_dev, wacom_wac); + + endpoint = &intf->cur_altsetting->endpoint[0].desc; + + usb_fill_int_urb(wacom->irq, dev, + usb_rcvintpipe(dev, endpoint->bEndpointAddress), + wacom_wac->data, wacom_wac->features->pktlen, + wacom_wac->features->irq, wacom, endpoint->bInterval); + wacom->irq->transfer_dma = wacom->data_dma; + wacom->irq->transfer_flags |= URB_NO_TRANSFER_DMA_MAP; + + input_register_device(wacom->dev); + + /* Ask the tablet to report tablet data. Repeat until it succeeds */ + do { + rep_data[0] = 2; + rep_data[1] = 2; + usb_set_report(intf, 3, 2, rep_data, 2); + usb_get_report(intf, 3, 2, rep_data, 2); + } while (rep_data[1] != 2 && limit++ < 5); + + usb_set_intfdata(intf, wacom); + return 0; + +fail2: usb_buffer_free(dev, 10, wacom_wac->data, wacom->data_dma); +fail1: input_free_device(input_dev); + kfree(wacom); + kfree(wacom_wac); + return -ENOMEM; +} + +static void wacom_disconnect(struct usb_interface *intf) +{ + struct wacom *wacom = usb_get_intfdata (intf); + + usb_set_intfdata(intf, NULL); + if (wacom) { + usb_kill_urb(wacom->irq); + input_unregister_device(wacom->dev); + usb_free_urb(wacom->irq); + usb_buffer_free(interface_to_usbdev(intf), 10, wacom->wacom_wac->data, wacom->data_dma); + kfree(wacom); + kfree(wacom->wacom_wac); + } +} + +static struct usb_driver wacom_driver = { + .name = "wacom", + .probe = wacom_probe, + .disconnect = wacom_disconnect, +}; + +static int __init wacom_init(void) +{ + int result; + wacom_driver.id_table = get_device_table(); + result = usb_register(&wacom_driver); + if (result == 0) + info(DRIVER_VERSION ":" DRIVER_DESC); + return result; +} + +static void __exit wacom_exit(void) +{ + usb_deregister(&wacom_driver); +} + +module_init(wacom_init); +module_exit(wacom_exit); diff --git a/drivers/usb/input/wacom_wac.c b/drivers/usb/input/wacom_wac.c new file mode 100644 index 00000000000..85d458c98b6 --- /dev/null +++ b/drivers/usb/input/wacom_wac.c @@ -0,0 +1,646 @@ +/* + * drivers/usb/input/wacom_wac.c + * + * USB Wacom Graphire and Wacom Intuos tablet support - Wacom specific code + * + */ + +/* + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + */ +#include "wacom.h" +#include "wacom_wac.h" + +static int wacom_penpartner_irq(struct wacom_wac *wacom, void *wcombo) +{ + unsigned char *data = wacom->data; + + switch (data[0]) { + case 1: + wacom_input_regs(wcombo); + if (data[5] & 0x80) { + wacom->tool[0] = (data[5] & 0x20) ? BTN_TOOL_RUBBER : BTN_TOOL_PEN; + wacom->id[0] = (data[5] & 0x20) ? ERASER_DEVICE_ID : STYLUS_DEVICE_ID; + wacom_report_key(wcombo, wacom->tool[0], 1); + wacom_report_abs(wcombo, ABS_MISC, wacom->id[0]); /* report tool id */ + wacom_report_abs(wcombo, ABS_X, wacom_le16_to_cpu(&data[1])); + wacom_report_abs(wcombo, ABS_Y, wacom_le16_to_cpu(&data[3])); + wacom_report_abs(wcombo, ABS_PRESSURE, (signed char)data[6] + 127); + wacom_report_key(wcombo, BTN_TOUCH, ((signed char)data[6] > -127)); + wacom_report_key(wcombo, BTN_STYLUS, (data[5] & 0x40)); + } else { + wacom_report_key(wcombo, wacom->tool[0], 0); + wacom_report_abs(wcombo, ABS_MISC, 0); /* report tool id */ + wacom_report_abs(wcombo, ABS_PRESSURE, -1); + wacom_report_key(wcombo, BTN_TOUCH, 0); + } + break; + case 2: + wacom_input_regs(wcombo); + wacom_report_key(wcombo, BTN_TOOL_PEN, 1); + wacom_report_abs(wcombo, ABS_MISC, STYLUS_DEVICE_ID); /* report tool id */ + wacom_report_abs(wcombo, ABS_X, wacom_le16_to_cpu(&data[1])); + wacom_report_abs(wcombo, ABS_Y, wacom_le16_to_cpu(&data[3])); + wacom_report_abs(wcombo, ABS_PRESSURE, (signed char)data[6] + 127); + wacom_report_key(wcombo, BTN_TOUCH, ((signed char)data[6] > -80) && !(data[5] & 0x20)); + wacom_report_key(wcombo, BTN_STYLUS, (data[5] & 0x40)); + break; + default: + printk(KERN_INFO "wacom_penpartner_irq: received unknown report #%d\n", data[0]); + return 0; + } + return 1; +} + +static int wacom_pl_irq(struct wacom_wac *wacom, void *wcombo) +{ + unsigned char *data = wacom->data; + int prox, id, pressure; + + if (data[0] != 2) { + dbg("wacom_pl_irq: received unknown report #%d", data[0]); + return 0; + } + + prox = data[1] & 0x40; + + wacom_input_regs(wcombo); + + id = ERASER_DEVICE_ID; + if (prox) { + + pressure = (signed char)((data[7] << 1) | ((data[4] >> 2) & 1)); + if (wacom->features->pressure_max > 255) + pressure = (pressure << 1) | ((data[4] >> 6) & 1); + pressure += (wacom->features->pressure_max + 1) / 2; + + /* + * if going from out of proximity into proximity select between the eraser + * and the pen based on the state of the stylus2 button, choose eraser if + * pressed else choose pen. if not a proximity change from out to in, send + * an out of proximity for previous tool then a in for new tool. + */ + if (!wacom->tool[0]) { + /* Eraser bit set for DTF */ + if (data[1] & 0x10) + wacom->tool[1] = BTN_TOOL_RUBBER; + else + /* Going into proximity select tool */ + wacom->tool[1] = (data[4] & 0x20) ? BTN_TOOL_RUBBER : BTN_TOOL_PEN; + } else { + /* was entered with stylus2 pressed */ + if (wacom->tool[1] == BTN_TOOL_RUBBER && !(data[4] & 0x20)) { + /* report out proximity for previous tool */ + wacom_report_key(wcombo, wacom->tool[1], 0); + wacom_input_sync(wcombo); + wacom->tool[1] = BTN_TOOL_PEN; + return 0; + } + } + if (wacom->tool[1] != BTN_TOOL_RUBBER) { + /* Unknown tool selected default to pen tool */ + wacom->tool[1] = BTN_TOOL_PEN; + id = STYLUS_DEVICE_ID; + } + wacom_report_key(wcombo, wacom->tool[1], prox); /* report in proximity for tool */ + wacom_report_abs(wcombo, ABS_MISC, id); /* report tool id */ + wacom_report_abs(wcombo, ABS_X, data[3] | (data[2] << 7) | ((data[1] & 0x03) << 14)); + wacom_report_abs(wcombo, ABS_Y, data[6] | (data[5] << 7) | ((data[4] & 0x03) << 14)); + wacom_report_abs(wcombo, ABS_PRESSURE, pressure); + + wacom_report_key(wcombo, BTN_TOUCH, data[4] & 0x08); + wacom_report_key(wcombo, BTN_STYLUS, data[4] & 0x10); + /* Only allow the stylus2 button to be reported for the pen tool. */ + wacom_report_key(wcombo, BTN_STYLUS2, (wacom->tool[1] == BTN_TOOL_PEN) && (data[4] & 0x20)); + } else { + /* report proximity-out of a (valid) tool */ + if (wacom->tool[1] != BTN_TOOL_RUBBER) { + /* Unknown tool selected default to pen tool */ + wacom->tool[1] = BTN_TOOL_PEN; + } + wacom_report_key(wcombo, wacom->tool[1], prox); + } + + wacom->tool[0] = prox; /* Save proximity state */ + return 1; +} + +static int wacom_ptu_irq(struct wacom_wac *wacom, void *wcombo) +{ + unsigned char *data = wacom->data; + int id; + + if (data[0] != 2) { + printk(KERN_INFO "wacom_ptu_irq: received unknown report #%d\n", data[0]); + return 0; + } + + wacom_input_regs(wcombo); + if (data[1] & 0x04) { + wacom_report_key(wcombo, BTN_TOOL_RUBBER, data[1] & 0x20); + wacom_report_key(wcombo, BTN_TOUCH, data[1] & 0x08); + id = ERASER_DEVICE_ID; + } else { + wacom_report_key(wcombo, BTN_TOOL_PEN, data[1] & 0x20); + wacom_report_key(wcombo, BTN_TOUCH, data[1] & 0x01); + id = STYLUS_DEVICE_ID; + } + wacom_report_abs(wcombo, ABS_MISC, id); /* report tool id */ + wacom_report_abs(wcombo, ABS_X, wacom_le16_to_cpu(&data[2])); + wacom_report_abs(wcombo, ABS_Y, wacom_le16_to_cpu(&data[4])); + wacom_report_abs(wcombo, ABS_PRESSURE, wacom_le16_to_cpu(&data[6])); + wacom_report_key(wcombo, BTN_STYLUS, data[1] & 0x02); + wacom_report_key(wcombo, BTN_STYLUS2, data[1] & 0x10); + return 1; +} + +static int wacom_graphire_irq(struct wacom_wac *wacom, void *wcombo) +{ + unsigned char *data = wacom->data; + int x, y, id, rw; + + if (data[0] != 2) { + dbg("wacom_graphire_irq: received unknown report #%d", data[0]); + return 0; + } + + wacom_input_regs(wcombo); + + id = STYLUS_DEVICE_ID; + if (data[1] & 0x10) { /* in prox */ + + switch ((data[1] >> 5) & 3) { + + case 0: /* Pen */ + wacom->tool[0] = BTN_TOOL_PEN; + break; + + case 1: /* Rubber */ + wacom->tool[0] = BTN_TOOL_RUBBER; + id = ERASER_DEVICE_ID; + break; + + case 2: /* Mouse with wheel */ + wacom_report_key(wcombo, BTN_MIDDLE, data[1] & 0x04); + if (wacom->features->type == WACOM_G4) { + rw = data[7] & 0x04 ? (data[7] & 0x03)-4 : (data[7] & 0x03); + wacom_report_rel(wcombo, REL_WHEEL, -rw); + } else + wacom_report_rel(wcombo, REL_WHEEL, -(signed char) data[6]); + /* fall through */ + + case 3: /* Mouse without wheel */ + wacom->tool[0] = BTN_TOOL_MOUSE; + id = CURSOR_DEVICE_ID; + wacom_report_key(wcombo, BTN_LEFT, data[1] & 0x01); + wacom_report_key(wcombo, BTN_RIGHT, data[1] & 0x02); + if (wacom->features->type == WACOM_G4) + wacom_report_abs(wcombo, ABS_DISTANCE, data[6]); + else + wacom_report_abs(wcombo, ABS_DISTANCE, data[7]); + break; + } + } + + if (data[1] & 0x90) { + x = wacom_le16_to_cpu(&data[2]); + y = wacom_le16_to_cpu(&data[4]); + wacom_report_abs(wcombo, ABS_X, x); + wacom_report_abs(wcombo, ABS_Y, y); + if (wacom->tool[0] != BTN_TOOL_MOUSE) { + wacom_report_abs(wcombo, ABS_PRESSURE, data[6] | ((data[7] & 0x01) << 8)); + wacom_report_key(wcombo, BTN_TOUCH, data[1] & 0x01); + wacom_report_key(wcombo, BTN_STYLUS, data[1] & 0x02); + wacom_report_key(wcombo, BTN_STYLUS2, data[1] & 0x04); + } + } + + if (data[1] & 0x10) + wacom_report_abs(wcombo, ABS_MISC, id); /* report tool id */ + else + wacom_report_abs(wcombo, ABS_MISC, 0); /* reset tool id */ + wacom_report_key(wcombo, wacom->tool[0], data[1] & 0x10); + wacom_input_sync(wcombo); + + /* send pad data */ + if (wacom->features->type == WACOM_G4) { + if ( (wacom->serial[1] & 0xc0) != (data[7] & 0xf8) ) { + wacom->id[1] = 1; + wacom->serial[1] = (data[7] & 0xf8); + wacom_report_key(wcombo, BTN_0, (data[7] & 0x40)); + wacom_report_key(wcombo, BTN_4, (data[7] & 0x80)); + rw = ((data[7] & 0x18) >> 3) - ((data[7] & 0x20) >> 3); + wacom_report_rel(wcombo, REL_WHEEL, rw); + wacom_report_key(wcombo, BTN_TOOL_FINGER, 0xf0); + wacom_input_event(wcombo, EV_MSC, MSC_SERIAL, 0xf0); + } else if (wacom->id[1]) { + wacom->id[1] = 0; + wacom_report_key(wcombo, BTN_TOOL_FINGER, 0); + wacom_input_event(wcombo, EV_MSC, MSC_SERIAL, 0xf0); + } + } + return 1; +} + +static int wacom_intuos_inout(struct wacom_wac *wacom, void *wcombo) +{ + unsigned char *data = wacom->data; + int idx; + + /* tool number */ + idx = data[1] & 0x01; + + /* Enter report */ + if ((data[1] & 0xfc) == 0xc0) { + /* serial number of the tool */ + wacom->serial[idx] = ((data[3] & 0x0f) << 28) + + (data[4] << 20) + (data[5] << 12) + + (data[6] << 4) + (data[7] >> 4); + + wacom->id[idx] = (data[2] << 4) | (data[3] >> 4); + switch (wacom->id[idx]) { + case 0x812: /* Inking pen */ + case 0x801: /* Intuos3 Inking pen */ + case 0x012: + wacom->tool[idx] = BTN_TOOL_PENCIL; + break; + case 0x822: /* Pen */ + case 0x842: + case 0x852: + case 0x823: /* Intuos3 Grip Pen */ + case 0x813: /* Intuos3 Classic Pen */ + case 0x885: /* Intuos3 Marker Pen */ + case 0x022: + wacom->tool[idx] = BTN_TOOL_PEN; + break; + case 0x832: /* Stroke pen */ + case 0x032: + wacom->tool[idx] = BTN_TOOL_BRUSH; + break; + case 0x007: /* Mouse 4D and 2D */ + case 0x09c: + case 0x094: + case 0x017: /* Intuos3 2D Mouse */ + wacom->tool[idx] = BTN_TOOL_MOUSE; + break; + case 0x096: /* Lens cursor */ + case 0x097: /* Intuos3 Lens cursor */ + wacom->tool[idx] = BTN_TOOL_LENS; + break; + case 0x82a: /* Eraser */ + case 0x85a: + case 0x91a: + case 0xd1a: + case 0x0fa: + case 0x82b: /* Intuos3 Grip Pen Eraser */ + case 0x81b: /* Intuos3 Classic Pen Eraser */ + case 0x91b: /* Intuos3 Airbrush Eraser */ + wacom->tool[idx] = BTN_TOOL_RUBBER; + break; + case 0xd12: + case 0x912: + case 0x112: + case 0x913: /* Intuos3 Airbrush */ + wacom->tool[idx] = BTN_TOOL_AIRBRUSH; + break; + default: /* Unknown tool */ + wacom->tool[idx] = BTN_TOOL_PEN; + } + /* only large I3 support Lens Cursor */ + if(!((wacom->tool[idx] == BTN_TOOL_LENS) && + (wacom->features->type == INTUOS3))) { + wacom_report_abs(wcombo, ABS_MISC, wacom->id[idx]); /* report tool id */ + wacom_report_key(wcombo, wacom->tool[idx], 1); + wacom_input_event(wcombo, EV_MSC, MSC_SERIAL, wacom->serial[idx]); + return 2; + } + return 1; + } + + /* Exit report */ + if ((data[1] & 0xfe) == 0x80) { + wacom_report_key(wcombo, wacom->tool[idx], 0); + wacom_report_abs(wcombo, ABS_MISC, 0); /* reset tool id */ + wacom_input_event(wcombo, EV_MSC, MSC_SERIAL, wacom->serial[idx]); + return 2; + } + return 0; +} + +static void wacom_intuos_general(struct wacom_wac *wacom, void *wcombo) +{ + unsigned char *data = wacom->data; + unsigned int t; + + /* general pen packet */ + if ((data[1] & 0xb8) == 0xa0) { + t = (data[6] << 2) | ((data[7] >> 6) & 3); + wacom_report_abs(wcombo, ABS_PRESSURE, t); + wacom_report_abs(wcombo, ABS_TILT_X, + ((data[7] << 1) & 0x7e) | (data[8] >> 7)); + wacom_report_abs(wcombo, ABS_TILT_Y, data[8] & 0x7f); + wacom_report_key(wcombo, BTN_STYLUS, data[1] & 2); + wacom_report_key(wcombo, BTN_STYLUS2, data[1] & 4); + wacom_report_key(wcombo, BTN_TOUCH, t > 10); + } + + /* airbrush second packet */ + if ((data[1] & 0xbc) == 0xb4) { + wacom_report_abs(wcombo, ABS_WHEEL, + (data[6] << 2) | ((data[7] >> 6) & 3)); + wacom_report_abs(wcombo, ABS_TILT_X, + ((data[7] << 1) & 0x7e) | (data[8] >> 7)); + wacom_report_abs(wcombo, ABS_TILT_Y, data[8] & 0x7f); + } + return; +} + +static int wacom_intuos_irq(struct wacom_wac *wacom, void *wcombo) +{ + unsigned char *data = wacom->data; + unsigned int t; + int idx, result; + + if (data[0] != 2 && data[0] != 5 && data[0] != 6 && data[0] != 12) { + dbg("wacom_intuos_irq: received unknown report #%d", data[0]); + return 0; + } + + wacom_input_regs(wcombo); + + /* tool number */ + idx = data[1] & 0x01; + + /* pad packets. Works as a second tool and is always in prox */ + if (data[0] == 12) { + /* initiate the pad as a device */ + if (wacom->tool[1] != BTN_TOOL_FINGER) + wacom->tool[1] = BTN_TOOL_FINGER; + + wacom_report_key(wcombo, BTN_0, (data[5] & 0x01)); + wacom_report_key(wcombo, BTN_1, (data[5] & 0x02)); + wacom_report_key(wcombo, BTN_2, (data[5] & 0x04)); + wacom_report_key(wcombo, BTN_3, (data[5] & 0x08)); + wacom_report_key(wcombo, BTN_4, (data[6] & 0x01)); + wacom_report_key(wcombo, BTN_5, (data[6] & 0x02)); + wacom_report_key(wcombo, BTN_6, (data[6] & 0x04)); + wacom_report_key(wcombo, BTN_7, (data[6] & 0x08)); + wacom_report_abs(wcombo, ABS_RX, ((data[1] & 0x1f) << 8) | data[2]); + wacom_report_abs(wcombo, ABS_RY, ((data[3] & 0x1f) << 8) | data[4]); + + if((data[5] & 0x0f) | (data[6] & 0x0f) | (data[1] & 0x1f) | data[2]) + wacom_report_key(wcombo, wacom->tool[1], 1); + else + wacom_report_key(wcombo, wacom->tool[1], 0); + wacom_input_event(wcombo, EV_MSC, MSC_SERIAL, 0xffffffff); + return 1; + } + + /* process in/out prox events */ + result = wacom_intuos_inout(wacom, wcombo); + if (result) + return result-1; + + /* Cintiq doesn't send data when RDY bit isn't set */ + if ((wacom->features->type == CINTIQ) && !(data[1] & 0x40)) + return 0; + + if (wacom->features->type >= INTUOS3) { + wacom_report_abs(wcombo, ABS_X, (data[2] << 9) | (data[3] << 1) | ((data[9] >> 1) & 1)); + wacom_report_abs(wcombo, ABS_Y, (data[4] << 9) | (data[5] << 1) | (data[9] & 1)); + wacom_report_abs(wcombo, ABS_DISTANCE, ((data[9] >> 2) & 0x3f)); + } else { + wacom_report_abs(wcombo, ABS_X, wacom_be16_to_cpu(&data[2])); + wacom_report_abs(wcombo, ABS_Y, wacom_be16_to_cpu(&data[4])); + wacom_report_abs(wcombo, ABS_DISTANCE, ((data[9] >> 3) & 0x1f)); + } + + /* process general packets */ + wacom_intuos_general(wacom, wcombo); + + /* 4D mouse, 2D mouse, marker pen rotation, or Lens cursor packets */ + if ((data[1] & 0xbc) == 0xa8 || (data[1] & 0xbe) == 0xb0) { + + if (data[1] & 0x02) { + /* Rotation packet */ + if (wacom->features->type >= INTUOS3) { + /* I3 marker pen rotation reported as wheel + * due to valuator limitation + */ + t = (data[6] << 3) | ((data[7] >> 5) & 7); + t = (data[7] & 0x20) ? ((t > 900) ? ((t-1) / 2 - 1350) : + ((t-1) / 2 + 450)) : (450 - t / 2) ; + wacom_report_abs(wcombo, ABS_WHEEL, t); + } else { + /* 4D mouse rotation packet */ + t = (data[6] << 3) | ((data[7] >> 5) & 7); + wacom_report_abs(wcombo, ABS_RZ, (data[7] & 0x20) ? + ((t - 1) / 2) : -t / 2); + } + + } else if (!(data[1] & 0x10) && wacom->features->type < INTUOS3) { + /* 4D mouse packet */ + wacom_report_key(wcombo, BTN_LEFT, data[8] & 0x01); + wacom_report_key(wcombo, BTN_MIDDLE, data[8] & 0x02); + wacom_report_key(wcombo, BTN_RIGHT, data[8] & 0x04); + + wacom_report_key(wcombo, BTN_SIDE, data[8] & 0x20); + wacom_report_key(wcombo, BTN_EXTRA, data[8] & 0x10); + t = (data[6] << 2) | ((data[7] >> 6) & 3); + wacom_report_abs(wcombo, ABS_THROTTLE, (data[8] & 0x08) ? -t : t); + + } else if (wacom->tool[idx] == BTN_TOOL_MOUSE) { + /* 2D mouse packet */ + wacom_report_key(wcombo, BTN_LEFT, data[8] & 0x04); + wacom_report_key(wcombo, BTN_MIDDLE, data[8] & 0x08); + wacom_report_key(wcombo, BTN_RIGHT, data[8] & 0x10); + wacom_report_rel(wcombo, REL_WHEEL, (data[8] & 0x01) + - ((data[8] & 0x02) >> 1)); + + /* I3 2D mouse side buttons */ + if (wacom->features->type == INTUOS3) { + wacom_report_key(wcombo, BTN_SIDE, data[8] & 0x40); + wacom_report_key(wcombo, BTN_EXTRA, data[8] & 0x20); + } + + } else if (wacom->features->type < INTUOS3) { + /* Lens cursor packets */ + wacom_report_key(wcombo, BTN_LEFT, data[8] & 0x01); + wacom_report_key(wcombo, BTN_MIDDLE, data[8] & 0x02); + wacom_report_key(wcombo, BTN_RIGHT, data[8] & 0x04); + wacom_report_key(wcombo, BTN_SIDE, data[8] & 0x10); + wacom_report_key(wcombo, BTN_EXTRA, data[8] & 0x08); + } + } + + wacom_report_abs(wcombo, ABS_MISC, wacom->id[idx]); /* report tool id */ + wacom_report_key(wcombo, wacom->tool[idx], 1); + wacom_input_event(wcombo, EV_MSC, MSC_SERIAL, wacom->serial[idx]); + return 1; +} + +int wacom_wac_irq(struct wacom_wac *wacom_wac, void *wcombo) +{ + switch (wacom_wac->features->type) { + case PENPARTNER: + return (wacom_penpartner_irq(wacom_wac, wcombo)); + break; + case PL: + return (wacom_pl_irq(wacom_wac, wcombo)); + break; + case WACOM_G4: + case GRAPHIRE: + return (wacom_graphire_irq(wacom_wac, wcombo)); + break; + case PTU: + return (wacom_ptu_irq(wacom_wac, wcombo)); + break; + case INTUOS: + case INTUOS3: + case INTUOS3L: + case CINTIQ: + return (wacom_intuos_irq(wacom_wac, wcombo)); + break; + default: + return 0; + } + return 0; +} + +void wacom_init_input_dev(struct input_dev *input_dev, struct wacom_wac *wacom_wac) +{ + switch (wacom_wac->features->type) { + case WACOM_G4: + input_dev_g4(input_dev, wacom_wac); + /* fall through */ + case GRAPHIRE: + input_dev_g(input_dev, wacom_wac); + break; + case INTUOS3: + case INTUOS3L: + case CINTIQ: + input_dev_i3(input_dev, wacom_wac); + /* fall through */ + case INTUOS: + input_dev_i(input_dev, wacom_wac); + break; + case PL: + case PTU: + input_dev_pl(input_dev, wacom_wac); + break; + case PENPARTNER: + input_dev_pt(input_dev, wacom_wac); + break; + } + return; +} + +static struct wacom_features wacom_features[] = { + { "Wacom Penpartner", 7, 5040, 3780, 255, 32, PENPARTNER, wacom_sys_irq }, + { "Wacom Graphire", 8, 10206, 7422, 511, 32, GRAPHIRE, wacom_sys_irq }, + { "Wacom Graphire2 4x5", 8, 10206, 7422, 511, 32, GRAPHIRE, wacom_sys_irq }, + { "Wacom Graphire2 5x7", 8, 13918, 10206, 511, 32, GRAPHIRE, wacom_sys_irq }, + { "Wacom Graphire3", 8, 10208, 7424, 511, 32, GRAPHIRE, wacom_sys_irq }, + { "Wacom Graphire3 6x8", 8, 16704, 12064, 511, 32, GRAPHIRE, wacom_sys_irq }, + { "Wacom Graphire4 4x5", 8, 10208, 7424, 511, 32, WACOM_G4, wacom_sys_irq }, + { "Wacom Graphire4 6x8", 8, 16704, 12064, 511, 32, WACOM_G4, wacom_sys_irq }, + { "Wacom Volito", 8, 5104, 3712, 511, 32, GRAPHIRE, wacom_sys_irq }, + { "Wacom PenStation2", 8, 3250, 2320, 255, 32, GRAPHIRE, wacom_sys_irq }, + { "Wacom Volito2 4x5", 8, 5104, 3712, 511, 32, GRAPHIRE, wacom_sys_irq }, + { "Wacom Volito2 2x3", 8, 3248, 2320, 511, 32, GRAPHIRE, wacom_sys_irq }, + { "Wacom PenPartner2", 8, 3250, 2320, 255, 32, GRAPHIRE, wacom_sys_irq }, + { "Wacom Intuos 4x5", 10, 12700, 10600, 1023, 15, INTUOS, wacom_sys_irq}, + { "Wacom Intuos 6x8", 10, 20320, 16240, 1023, 15, INTUOS, wacom_sys_irq }, + { "Wacom Intuos 9x12", 10, 30480, 24060, 1023, 15, INTUOS, wacom_sys_irq }, + { "Wacom Intuos 12x12", 10, 30480, 31680, 1023, 15, INTUOS, wacom_sys_irq }, + { "Wacom Intuos 12x18", 10, 45720, 31680, 1023, 15, INTUOS, wacom_sys_irq}, + { "Wacom PL400", 8, 5408, 4056, 255, 32, PL, wacom_sys_irq }, + { "Wacom PL500", 8, 6144, 4608, 255, 32, PL, wacom_sys_irq }, + { "Wacom PL600", 8, 6126, 4604, 255, 32, PL, wacom_sys_irq }, + { "Wacom PL600SX", 8, 6260, 5016, 255, 32, PL, wacom_sys_irq }, + { "Wacom PL550", 8, 6144, 4608, 511, 32, PL, wacom_sys_irq }, + { "Wacom PL800", 8, 7220, 5780, 511, 32, PL, wacom_sys_irq }, + { "Wacom PL700", 8, 6758, 5406, 511, 32, PL, wacom_sys_irq }, + { "Wacom PL510", 8, 6282, 4762, 511, 32, PL, wacom_sys_irq }, + { "Wacom DTU710", 8, 34080, 27660, 511, 32, PL, wacom_sys_irq }, + { "Wacom DTF521", 8, 6282, 4762, 511, 32, PL, wacom_sys_irq }, + { "Wacom DTF720", 8, 6858, 5506, 511, 32, PL, wacom_sys_irq }, + { "Wacom Cintiq Partner",8, 20480, 15360, 511, 32, PTU, wacom_sys_irq }, + { "Wacom Intuos2 4x5", 10, 12700, 10600, 1023, 15, INTUOS, wacom_sys_irq }, + { "Wacom Intuos2 6x8", 10, 20320, 16240, 1023, 15, INTUOS, wacom_sys_irq }, + { "Wacom Intuos2 9x12", 10, 30480, 24060, 1023, 15, INTUOS, wacom_sys_irq }, + { "Wacom Intuos2 12x12", 10, 30480, 31680, 1023, 15, INTUOS, wacom_sys_irq }, + { "Wacom Intuos2 12x18", 10, 45720, 31680, 1023, 15, INTUOS, wacom_sys_irq }, + { "Wacom Intuos3 4x5", 10, 25400, 20320, 1023, 15, INTUOS3, wacom_sys_irq }, + { "Wacom Intuos3 6x8", 10, 40640, 30480, 1023, 15, INTUOS3, wacom_sys_irq }, + { "Wacom Intuos3 9x12", 10, 60960, 45720, 1023, 15, INTUOS3, wacom_sys_irq }, + { "Wacom Intuos3 12x12", 10, 60960, 60960, 1023, 15, INTUOS3L, wacom_sys_irq }, + { "Wacom Intuos3 12x19", 10, 97536, 60960, 1023, 15, INTUOS3L, wacom_sys_irq }, + { "Wacom Intuos3 6x11", 10, 54204, 31750, 1023, 15, INTUOS3, wacom_sys_irq }, + { "Wacom Cintiq 21UX", 10, 87200, 65600, 1023, 15, CINTIQ, wacom_sys_irq }, + { "Wacom Intuos2 6x8", 10, 20320, 16240, 1023, 15, INTUOS, wacom_sys_irq }, + { } +}; + +static struct usb_device_id wacom_ids[] = { + { USB_DEVICE(USB_VENDOR_ID_WACOM, 0x00) }, + { USB_DEVICE(USB_VENDOR_ID_WACOM, 0x10) }, + { USB_DEVICE(USB_VENDOR_ID_WACOM, 0x11) }, + { USB_DEVICE(USB_VENDOR_ID_WACOM, 0x12) }, + { USB_DEVICE(USB_VENDOR_ID_WACOM, 0x13) }, + { USB_DEVICE(USB_VENDOR_ID_WACOM, 0x14) }, + { USB_DEVICE(USB_VENDOR_ID_WACOM, 0x15) }, + { USB_DEVICE(USB_VENDOR_ID_WACOM, 0x16) }, + { USB_DEVICE(USB_VENDOR_ID_WACOM, 0x60) }, + { USB_DEVICE(USB_VENDOR_ID_WACOM, 0x61) }, + { USB_DEVICE(USB_VENDOR_ID_WACOM, 0x62) }, + { USB_DEVICE(USB_VENDOR_ID_WACOM, 0x63) }, + { USB_DEVICE(USB_VENDOR_ID_WACOM, 0x64) }, + { USB_DEVICE(USB_VENDOR_ID_WACOM, 0x20) }, + { USB_DEVICE(USB_VENDOR_ID_WACOM, 0x21) }, + { USB_DEVICE(USB_VENDOR_ID_WACOM, 0x22) }, + { USB_DEVICE(USB_VENDOR_ID_WACOM, 0x23) }, + { USB_DEVICE(USB_VENDOR_ID_WACOM, 0x24) }, + { USB_DEVICE(USB_VENDOR_ID_WACOM, 0x30) }, + { USB_DEVICE(USB_VENDOR_ID_WACOM, 0x31) }, + { USB_DEVICE(USB_VENDOR_ID_WACOM, 0x32) }, + { USB_DEVICE(USB_VENDOR_ID_WACOM, 0x33) }, + { USB_DEVICE(USB_VENDOR_ID_WACOM, 0x34) }, + { USB_DEVICE(USB_VENDOR_ID_WACOM, 0x35) }, + { USB_DEVICE(USB_VENDOR_ID_WACOM, 0x37) }, + { USB_DEVICE(USB_VENDOR_ID_WACOM, 0x38) }, + { USB_DEVICE(USB_VENDOR_ID_WACOM, 0x39) }, + { USB_DEVICE(USB_VENDOR_ID_WACOM, 0xC0) }, + { USB_DEVICE(USB_VENDOR_ID_WACOM, 0xC4) }, + { USB_DEVICE(USB_VENDOR_ID_WACOM, 0x03) }, + { USB_DEVICE(USB_VENDOR_ID_WACOM, 0x41) }, + { USB_DEVICE(USB_VENDOR_ID_WACOM, 0x42) }, + { USB_DEVICE(USB_VENDOR_ID_WACOM, 0x43) }, + { USB_DEVICE(USB_VENDOR_ID_WACOM, 0x44) }, + { USB_DEVICE(USB_VENDOR_ID_WACOM, 0x45) }, + { USB_DEVICE(USB_VENDOR_ID_WACOM, 0xB0) }, + { USB_DEVICE(USB_VENDOR_ID_WACOM, 0xB1) }, + { USB_DEVICE(USB_VENDOR_ID_WACOM, 0xB2) }, + { USB_DEVICE(USB_VENDOR_ID_WACOM, 0xB3) }, + { USB_DEVICE(USB_VENDOR_ID_WACOM, 0xB4) }, + { USB_DEVICE(USB_VENDOR_ID_WACOM, 0xB5) }, + { USB_DEVICE(USB_VENDOR_ID_WACOM, 0x3F) }, + { USB_DEVICE(USB_VENDOR_ID_WACOM, 0x47) }, + { } +}; + +const struct usb_device_id * get_device_table(void) { + const struct usb_device_id * id_table = wacom_ids; + return id_table; +} + +struct wacom_features * get_wacom_feature(const struct usb_device_id * id) { + int index = id - wacom_ids; + struct wacom_features *wf = &wacom_features[index]; + return wf; +} + +MODULE_DEVICE_TABLE(usb, wacom_ids); diff --git a/drivers/usb/input/wacom_wac.h b/drivers/usb/input/wacom_wac.h new file mode 100644 index 00000000000..ceae7bf59d9 --- /dev/null +++ b/drivers/usb/input/wacom_wac.h @@ -0,0 +1,48 @@ +/* + * drivers/usb/input/wacom_wac.h + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + */ +#ifndef WACOM_WAC_H +#define WACOM_WAC_H + +#define STYLUS_DEVICE_ID 0x02 +#define CURSOR_DEVICE_ID 0x06 +#define ERASER_DEVICE_ID 0x0A + +enum { + PENPARTNER = 0, + GRAPHIRE, + WACOM_G4, + PTU, + PL, + INTUOS, + INTUOS3, + INTUOS3L, + CINTIQ, + MAX_TYPE +}; + +struct wacom_features { + char *name; + int pktlen; + int x_max; + int y_max; + int pressure_max; + int distance_max; + int type; + usb_complete_t irq; +}; + +struct wacom_wac { + signed char *data; + int tool[2]; + int id[2]; + __u32 serial[2]; + struct wacom_features *features; +}; + +#endif diff --git a/drivers/usb/input/yealink.c b/drivers/usb/input/yealink.c index 7b45fd3de91..7291e7a2717 100644 --- a/drivers/usb/input/yealink.c +++ b/drivers/usb/input/yealink.c @@ -971,7 +971,7 @@ static int usb_probe(struct usb_interface *intf, const struct usb_device_id *id) DRIVER_VERSION, sizeof(DRIVER_VERSION)); /* Register sysfs hooks (don't care about failure) */ - sysfs_create_group(&intf->dev.kobj, &yld_attr_group); + ret = sysfs_create_group(&intf->dev.kobj, &yld_attr_group); return 0; } diff --git a/drivers/usb/misc/Kconfig b/drivers/usb/misc/Kconfig index 88928a4be80..c29658f69e2 100644 --- a/drivers/usb/misc/Kconfig +++ b/drivers/usb/misc/Kconfig @@ -32,6 +32,16 @@ config USB_EMI26 To compile this driver as a module, choose M here: the module will be called emi26. +config USB_ADUTUX + tristate "ADU devices from Ontrak Control Systems (EXPERIMENTAL)" + depends on USB && EXPERIMENTAL + help + Say Y if you want to use an ADU device from Ontrak Control + Systems. + + To compile this driver as a module, choose M here. The module + will be called adutux. + config USB_AUERSWALD tristate "USB Auerswald ISDN support (EXPERIMENTAL)" depends on USB && EXPERIMENTAL @@ -115,19 +125,36 @@ config USB_CYTHERM To compile this driver as a module, choose M here: the module will be called cytherm. -config USB_PHIDGETKIT - tristate "USB PhidgetKit support" +config USB_PHIDGET + tristate "USB Phidgets drivers" depends on USB help - Say Y here if you want to connect a PhidgetKit USB device from - Phidgets Inc. + Say Y here to enable the various drivers for devices from + Phidgets inc. + +config USB_PHIDGETKIT + tristate "USB PhidgetInterfaceKit support" + depends on USB_PHIDGET + help + Say Y here if you want to connect a PhidgetInterfaceKit USB device + from Phidgets Inc. To compile this driver as a module, choose M here: the module will be called phidgetkit. +config USB_PHIDGETMOTORCONTROL + tristate "USB PhidgetMotorControl support" + depends on USB_PHIDGET + help + Say Y here if you want to connect a PhidgetMotorControl USB device + from Phidgets Inc. + + To compile this driver as a module, choose M here: the + module will be called phidgetmotorcontrol. + config USB_PHIDGETSERVO tristate "USB PhidgetServo support" - depends on USB + depends on USB_PHIDGET help Say Y here if you want to connect an 1 or 4 Motor PhidgetServo servo controller version 2.0 or 3.0. @@ -151,6 +178,30 @@ config USB_IDMOUSE See also <http://www.fs.tum.de/~echtler/idmouse/>. +config USB_FTDI_ELAN + tristate "Elan PCMCIA CardBus Adapter USB Client" + depends on USB + default M + help + ELAN's Uxxx series of adapters are USB to PCMCIA CardBus adapters. + Currently only the U132 adapter is available. + + The U132 is specifically designed for CardBus PC cards that contain + an OHCI host controller. Typical PC cards are the Orange Mobile 3G + Option GlobeTrotter Fusion card. The U132 adapter will *NOT* work + with PC cards that do not contain an OHCI controller. To use a U132 + adapter you will need this "ftdi-elan" module as well as the "u132-hcd" + module which is a USB host controller driver that talks to the OHCI + controller within CardBus card that are inserted in the U132 adapter. + + This driver has been tested with a CardBus OHCI USB adapter, and + worked with a USB PEN Drive inserted into the first USB port of + the PCCARD. A rather pointless thing to do, but useful for testing. + + See also the USB_U132_HCD entry "Elan U132 Adapter Host Controller" + + It is safe to say M here. + config USB_APPLEDISPLAY tristate "Apple Cinema Display support" depends on USB diff --git a/drivers/usb/misc/Makefile b/drivers/usb/misc/Makefile index 2927260c581..2be70fa259b 100644 --- a/drivers/usb/misc/Makefile +++ b/drivers/usb/misc/Makefile @@ -3,22 +3,25 @@ # (the ones that don't fit into any other categories) # +obj-$(CONFIG_USB_ADUTUX) += adutux.o obj-$(CONFIG_USB_AUERSWALD) += auerswald.o obj-$(CONFIG_USB_CYPRESS_CY7C63)+= cypress_cy7c63.o obj-$(CONFIG_USB_CYTHERM) += cytherm.o obj-$(CONFIG_USB_EMI26) += emi26.o obj-$(CONFIG_USB_EMI62) += emi62.o +obj-$(CONFIG_USB_FTDI_ELAN) += ftdi-elan.o obj-$(CONFIG_USB_IDMOUSE) += idmouse.o obj-$(CONFIG_USB_LCD) += usblcd.o obj-$(CONFIG_USB_LD) += ldusb.o obj-$(CONFIG_USB_LED) += usbled.o obj-$(CONFIG_USB_LEGOTOWER) += legousbtower.o +obj-$(CONFIG_USB_PHIDGET) += phidget.o obj-$(CONFIG_USB_PHIDGETKIT) += phidgetkit.o +obj-$(CONFIG_USB_PHIDGETMOTORCONTROL) += phidgetmotorcontrol.o obj-$(CONFIG_USB_PHIDGETSERVO) += phidgetservo.o obj-$(CONFIG_USB_RIO500) += rio500.o obj-$(CONFIG_USB_TEST) += usbtest.o obj-$(CONFIG_USB_USS720) += uss720.o -obj-$(CONFIG_USB_APPLEDISPLAY) += appledisplay.o obj-$(CONFIG_USB_SISUSBVGA) += sisusbvga/ diff --git a/drivers/usb/misc/adutux.c b/drivers/usb/misc/adutux.c new file mode 100644 index 00000000000..d3963199b6e --- /dev/null +++ b/drivers/usb/misc/adutux.c @@ -0,0 +1,900 @@ +/* + * adutux - driver for ADU devices from Ontrak Control Systems + * This is an experimental driver. Use at your own risk. + * This driver is not supported by Ontrak Control Systems. + * + * Copyright (c) 2003 John Homppi (SCO, leave this notice here) + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * derived from the Lego USB Tower driver 0.56: + * Copyright (c) 2003 David Glance <davidgsf@sourceforge.net> + * 2001 Juergen Stuber <stuber@loria.fr> + * that was derived from USB Skeleton driver - 0.5 + * Copyright (c) 2001 Greg Kroah-Hartman (greg@kroah.com) + * + */ + +#include <linux/kernel.h> +#include <linux/errno.h> +#include <linux/init.h> +#include <linux/slab.h> +#include <linux/module.h> +#include <linux/usb.h> +#include <asm/uaccess.h> + +#ifdef CONFIG_USB_DEBUG +static int debug = 5; +#else +static int debug = 1; +#endif + +/* Use our own dbg macro */ +#undef dbg +#define dbg(lvl, format, arg...) \ +do { \ + if (debug >= lvl) \ + printk(KERN_DEBUG __FILE__ " : " format " \n", ## arg); \ +} while (0) + + +/* Version Information */ +#define DRIVER_VERSION "v0.0.13" +#define DRIVER_AUTHOR "John Homppi" +#define DRIVER_DESC "adutux (see www.ontrak.net)" + +/* Module parameters */ +module_param(debug, int, S_IRUGO | S_IWUSR); +MODULE_PARM_DESC(debug, "Debug enabled or not"); + +/* Define these values to match your device */ +#define ADU_VENDOR_ID 0x0a07 +#define ADU_PRODUCT_ID 0x0064 + +/* table of devices that work with this driver */ +static struct usb_device_id device_table [] = { + { USB_DEVICE(ADU_VENDOR_ID, ADU_PRODUCT_ID) }, /* ADU100 */ + { USB_DEVICE(ADU_VENDOR_ID, ADU_PRODUCT_ID+20) }, /* ADU120 */ + { USB_DEVICE(ADU_VENDOR_ID, ADU_PRODUCT_ID+30) }, /* ADU130 */ + { USB_DEVICE(ADU_VENDOR_ID, ADU_PRODUCT_ID+100) }, /* ADU200 */ + { USB_DEVICE(ADU_VENDOR_ID, ADU_PRODUCT_ID+108) }, /* ADU208 */ + { USB_DEVICE(ADU_VENDOR_ID, ADU_PRODUCT_ID+118) }, /* ADU218 */ + { }/* Terminating entry */ +}; + +MODULE_DEVICE_TABLE(usb, device_table); + +#ifdef CONFIG_USB_DYNAMIC_MINORS +#define ADU_MINOR_BASE 0 +#else +#define ADU_MINOR_BASE 67 +#endif + +/* we can have up to this number of device plugged in at once */ +#define MAX_DEVICES 16 + +#define COMMAND_TIMEOUT (2*HZ) /* 60 second timeout for a command */ + +/* Structure to hold all of our device specific stuff */ +struct adu_device { + struct semaphore sem; /* locks this structure */ + struct usb_device* udev; /* save off the usb device pointer */ + struct usb_interface* interface; + unsigned char minor; /* the starting minor number for this device */ + char serial_number[8]; + + int open_count; /* number of times this port has been opened */ + + char* read_buffer_primary; + int read_buffer_length; + char* read_buffer_secondary; + int secondary_head; + int secondary_tail; + spinlock_t buflock; + + wait_queue_head_t read_wait; + wait_queue_head_t write_wait; + + char* interrupt_in_buffer; + struct usb_endpoint_descriptor* interrupt_in_endpoint; + struct urb* interrupt_in_urb; + int read_urb_finished; + + char* interrupt_out_buffer; + struct usb_endpoint_descriptor* interrupt_out_endpoint; + struct urb* interrupt_out_urb; +}; + +/* prevent races between open() and disconnect */ +static DEFINE_MUTEX(disconnect_mutex); +static struct usb_driver adu_driver; + +static void adu_debug_data(int level, const char *function, int size, + const unsigned char *data) +{ + int i; + + if (debug < level) + return; + + printk(KERN_DEBUG __FILE__": %s - length = %d, data = ", + function, size); + for (i = 0; i < size; ++i) + printk("%.2x ", data[i]); + printk("\n"); +} + +/** + * adu_abort_transfers + * aborts transfers and frees associated data structures + */ +static void adu_abort_transfers(struct adu_device *dev) +{ + dbg(2," %s : enter", __FUNCTION__); + + if (dev == NULL) { + dbg(1," %s : dev is null", __FUNCTION__); + goto exit; + } + + if (dev->udev == NULL) { + dbg(1," %s : udev is null", __FUNCTION__); + goto exit; + } + + dbg(2," %s : udev state %d", __FUNCTION__, dev->udev->state); + if (dev->udev->state == USB_STATE_NOTATTACHED) { + dbg(1," %s : udev is not attached", __FUNCTION__); + goto exit; + } + + /* shutdown transfer */ + usb_unlink_urb(dev->interrupt_in_urb); + usb_unlink_urb(dev->interrupt_out_urb); + +exit: + dbg(2," %s : leave", __FUNCTION__); +} + +static void adu_delete(struct adu_device *dev) +{ + dbg(2, "%s enter", __FUNCTION__); + + adu_abort_transfers(dev); + + /* free data structures */ + usb_free_urb(dev->interrupt_in_urb); + usb_free_urb(dev->interrupt_out_urb); + kfree(dev->read_buffer_primary); + kfree(dev->read_buffer_secondary); + kfree(dev->interrupt_in_buffer); + kfree(dev->interrupt_out_buffer); + kfree(dev); + + dbg(2, "%s : leave", __FUNCTION__); +} + +static void adu_interrupt_in_callback(struct urb *urb, struct pt_regs *regs) +{ + struct adu_device *dev = urb->context; + + dbg(4," %s : enter, status %d", __FUNCTION__, urb->status); + adu_debug_data(5, __FUNCTION__, urb->actual_length, + urb->transfer_buffer); + + spin_lock(&dev->buflock); + + if (urb->status != 0) { + if ((urb->status != -ENOENT) && (urb->status != -ECONNRESET)) { + dbg(1," %s : nonzero status received: %d", + __FUNCTION__, urb->status); + } + goto exit; + } + + if (urb->actual_length > 0 && dev->interrupt_in_buffer[0] != 0x00) { + if (dev->read_buffer_length < + (4 * le16_to_cpu(dev->interrupt_in_endpoint->wMaxPacketSize)) - + (urb->actual_length)) { + memcpy (dev->read_buffer_primary + + dev->read_buffer_length, + dev->interrupt_in_buffer, urb->actual_length); + + dev->read_buffer_length += urb->actual_length; + dbg(2," %s reading %d ", __FUNCTION__, + urb->actual_length); + } else { + dbg(1," %s : read_buffer overflow", __FUNCTION__); + } + } + +exit: + dev->read_urb_finished = 1; + spin_unlock(&dev->buflock); + /* always wake up so we recover from errors */ + wake_up_interruptible(&dev->read_wait); + adu_debug_data(5, __FUNCTION__, urb->actual_length, + urb->transfer_buffer); + dbg(4," %s : leave, status %d", __FUNCTION__, urb->status); +} + +static void adu_interrupt_out_callback(struct urb *urb, struct pt_regs *regs) +{ + struct adu_device *dev = urb->context; + + dbg(4," %s : enter, status %d", __FUNCTION__, urb->status); + adu_debug_data(5,__FUNCTION__, urb->actual_length, urb->transfer_buffer); + + if (urb->status != 0) { + if ((urb->status != -ENOENT) && + (urb->status != -ECONNRESET)) { + dbg(1, " %s :nonzero status received: %d", + __FUNCTION__, urb->status); + } + goto exit; + } + + wake_up_interruptible(&dev->write_wait); +exit: + + adu_debug_data(5, __FUNCTION__, urb->actual_length, + urb->transfer_buffer); + dbg(4," %s : leave, status %d", __FUNCTION__, urb->status); +} + +static int adu_open(struct inode *inode, struct file *file) +{ + struct adu_device *dev = NULL; + struct usb_interface *interface; + int subminor; + int retval = 0; + + dbg(2,"%s : enter", __FUNCTION__); + + subminor = iminor(inode); + + mutex_lock(&disconnect_mutex); + + interface = usb_find_interface(&adu_driver, subminor); + if (!interface) { + err("%s - error, can't find device for minor %d", + __FUNCTION__, subminor); + retval = -ENODEV; + goto exit_no_device; + } + + dev = usb_get_intfdata(interface); + if (!dev) { + retval = -ENODEV; + goto exit_no_device; + } + + /* lock this device */ + if ((retval = down_interruptible(&dev->sem))) { + dbg(2, "%s : sem down failed", __FUNCTION__); + goto exit_no_device; + } + + /* increment our usage count for the device */ + ++dev->open_count; + dbg(2,"%s : open count %d", __FUNCTION__, dev->open_count); + + /* save device in the file's private structure */ + file->private_data = dev; + + /* initialize in direction */ + dev->read_buffer_length = 0; + + /* fixup first read by having urb waiting for it */ + usb_fill_int_urb(dev->interrupt_in_urb,dev->udev, + usb_rcvintpipe(dev->udev, + dev->interrupt_in_endpoint->bEndpointAddress), + dev->interrupt_in_buffer, + le16_to_cpu(dev->interrupt_in_endpoint->wMaxPacketSize), + adu_interrupt_in_callback, dev, + dev->interrupt_in_endpoint->bInterval); + /* dev->interrupt_in_urb->transfer_flags |= URB_ASYNC_UNLINK; */ + dev->read_urb_finished = 0; + usb_submit_urb(dev->interrupt_in_urb, GFP_KERNEL); + /* we ignore failure */ + /* end of fixup for first read */ + + up(&dev->sem); + +exit_no_device: + mutex_unlock(&disconnect_mutex); + dbg(2,"%s : leave, return value %d ", __FUNCTION__, retval); + + return retval; +} + +static int adu_release_internal(struct adu_device *dev) +{ + int retval = 0; + + dbg(2," %s : enter", __FUNCTION__); + + if (dev->udev == NULL) { + /* the device was unplugged before the file was released */ + adu_delete(dev); + goto exit; + } + + /* decrement our usage count for the device */ + --dev->open_count; + dbg(2," %s : open count %d", __FUNCTION__, dev->open_count); + if (dev->open_count <= 0) { + adu_abort_transfers(dev); + dev->open_count = 0; + } + +exit: + dbg(2," %s : leave", __FUNCTION__); + return retval; +} + +static int adu_release(struct inode *inode, struct file *file) +{ + struct adu_device *dev = NULL; + int retval = 0; + + dbg(2," %s : enter", __FUNCTION__); + + if (file == NULL) { + dbg(1," %s : file is NULL", __FUNCTION__); + retval = -ENODEV; + goto exit; + } + + dev = file->private_data; + + if (dev == NULL) { + dbg(1," %s : object is NULL", __FUNCTION__); + retval = -ENODEV; + goto exit; + } + + /* lock our device */ + down(&dev->sem); /* not interruptible */ + + if (dev->open_count <= 0) { + dbg(1," %s : device not opened", __FUNCTION__); + retval = -ENODEV; + goto exit; + } + + /* do the work */ + retval = adu_release_internal(dev); + +exit: + up(&dev->sem); + dbg(2," %s : leave, return value %d", __FUNCTION__, retval); + return retval; +} + +static ssize_t adu_read(struct file *file, __user char *buffer, size_t count, + loff_t *ppos) +{ + struct adu_device *dev; + size_t bytes_read = 0; + size_t bytes_to_read = count; + int i; + int retval = 0; + int timeout = 0; + int should_submit = 0; + unsigned long flags; + DECLARE_WAITQUEUE(wait, current); + + dbg(2," %s : enter, count = %Zd, file=%p", __FUNCTION__, count, file); + + dev = file->private_data; + dbg(2," %s : dev=%p", __FUNCTION__, dev); + /* lock this object */ + if (down_interruptible(&dev->sem)) + return -ERESTARTSYS; + + /* verify that the device wasn't unplugged */ + if (dev->udev == NULL || dev->minor == 0) { + retval = -ENODEV; + err("No device or device unplugged %d", retval); + goto exit; + } + + /* verify that some data was requested */ + if (count == 0) { + dbg(1," %s : read request of 0 bytes", __FUNCTION__); + goto exit; + } + + timeout = COMMAND_TIMEOUT; + dbg(2," %s : about to start looping", __FUNCTION__); + while (bytes_to_read) { + int data_in_secondary = dev->secondary_tail - dev->secondary_head; + dbg(2," %s : while, data_in_secondary=%d, status=%d", + __FUNCTION__, data_in_secondary, + dev->interrupt_in_urb->status); + + if (data_in_secondary) { + /* drain secondary buffer */ + int amount = bytes_to_read < data_in_secondary ? bytes_to_read : data_in_secondary; + i = copy_to_user(buffer, dev->read_buffer_secondary+dev->secondary_head, amount); + if (i < 0) { + retval = -EFAULT; + goto exit; + } + dev->secondary_head += (amount - i); + bytes_read += (amount - i); + bytes_to_read -= (amount - i); + if (i) { + retval = bytes_read ? bytes_read : -EFAULT; + goto exit; + } + } else { + /* we check the primary buffer */ + spin_lock_irqsave (&dev->buflock, flags); + if (dev->read_buffer_length) { + /* we secure access to the primary */ + char *tmp; + dbg(2," %s : swap, read_buffer_length = %d", + __FUNCTION__, dev->read_buffer_length); + tmp = dev->read_buffer_secondary; + dev->read_buffer_secondary = dev->read_buffer_primary; + dev->read_buffer_primary = tmp; + dev->secondary_head = 0; + dev->secondary_tail = dev->read_buffer_length; + dev->read_buffer_length = 0; + spin_unlock_irqrestore(&dev->buflock, flags); + /* we have a free buffer so use it */ + should_submit = 1; + } else { + /* even the primary was empty - we may need to do IO */ + if (dev->interrupt_in_urb->status == -EINPROGRESS) { + /* somebody is doing IO */ + spin_unlock_irqrestore(&dev->buflock, flags); + dbg(2," %s : submitted already", __FUNCTION__); + } else { + /* we must initiate input */ + dbg(2," %s : initiate input", __FUNCTION__); + dev->read_urb_finished = 0; + + usb_fill_int_urb(dev->interrupt_in_urb,dev->udev, + usb_rcvintpipe(dev->udev, + dev->interrupt_in_endpoint->bEndpointAddress), + dev->interrupt_in_buffer, + le16_to_cpu(dev->interrupt_in_endpoint->wMaxPacketSize), + adu_interrupt_in_callback, + dev, + dev->interrupt_in_endpoint->bInterval); + retval = usb_submit_urb(dev->interrupt_in_urb, GFP_KERNEL); + if (!retval) { + spin_unlock_irqrestore(&dev->buflock, flags); + dbg(2," %s : submitted OK", __FUNCTION__); + } else { + if (retval == -ENOMEM) { + retval = bytes_read ? bytes_read : -ENOMEM; + } + spin_unlock_irqrestore(&dev->buflock, flags); + dbg(2," %s : submit failed", __FUNCTION__); + goto exit; + } + } + + /* we wait for I/O to complete */ + set_current_state(TASK_INTERRUPTIBLE); + add_wait_queue(&dev->read_wait, &wait); + if (!dev->read_urb_finished) + timeout = schedule_timeout(COMMAND_TIMEOUT); + else + set_current_state(TASK_RUNNING); + remove_wait_queue(&dev->read_wait, &wait); + + if (timeout <= 0) { + dbg(2," %s : timeout", __FUNCTION__); + retval = bytes_read ? bytes_read : -ETIMEDOUT; + goto exit; + } + + if (signal_pending(current)) { + dbg(2," %s : signal pending", __FUNCTION__); + retval = bytes_read ? bytes_read : -EINTR; + goto exit; + } + } + } + } + + retval = bytes_read; + /* if the primary buffer is empty then use it */ + if (should_submit && !dev->interrupt_in_urb->status==-EINPROGRESS) { + usb_fill_int_urb(dev->interrupt_in_urb,dev->udev, + usb_rcvintpipe(dev->udev, + dev->interrupt_in_endpoint->bEndpointAddress), + dev->interrupt_in_buffer, + le16_to_cpu(dev->interrupt_in_endpoint->wMaxPacketSize), + adu_interrupt_in_callback, + dev, + dev->interrupt_in_endpoint->bInterval); + /* dev->interrupt_in_urb->transfer_flags |= URB_ASYNC_UNLINK; */ + dev->read_urb_finished = 0; + usb_submit_urb(dev->interrupt_in_urb, GFP_KERNEL); + /* we ignore failure */ + } + +exit: + /* unlock the device */ + up(&dev->sem); + + dbg(2," %s : leave, return value %d", __FUNCTION__, retval); + return retval; +} + +static ssize_t adu_write(struct file *file, const __user char *buffer, + size_t count, loff_t *ppos) +{ + struct adu_device *dev; + size_t bytes_written = 0; + size_t bytes_to_write; + size_t buffer_size; + int retval = 0; + int timeout = 0; + + dbg(2," %s : enter, count = %Zd", __FUNCTION__, count); + + dev = file->private_data; + + /* lock this object */ + down_interruptible(&dev->sem); + + /* verify that the device wasn't unplugged */ + if (dev->udev == NULL || dev->minor == 0) { + retval = -ENODEV; + err("No device or device unplugged %d", retval); + goto exit; + } + + /* verify that we actually have some data to write */ + if (count == 0) { + dbg(1," %s : write request of 0 bytes", __FUNCTION__); + goto exit; + } + + + while (count > 0) { + if (dev->interrupt_out_urb->status == -EINPROGRESS) { + timeout = COMMAND_TIMEOUT; + + while (timeout > 0) { + if (signal_pending(current)) { + dbg(1," %s : interrupted", __FUNCTION__); + retval = -EINTR; + goto exit; + } + up(&dev->sem); + timeout = interruptible_sleep_on_timeout(&dev->write_wait, timeout); + down_interruptible(&dev->sem); + if (timeout > 0) { + break; + } + dbg(1," %s : interrupted timeout: %d", __FUNCTION__, timeout); + } + + + dbg(1," %s : final timeout: %d", __FUNCTION__, timeout); + + if (timeout == 0) { + dbg(1, "%s - command timed out.", __FUNCTION__); + retval = -ETIMEDOUT; + goto exit; + } + + dbg(4," %s : in progress, count = %Zd", __FUNCTION__, count); + + } else { + dbg(4," %s : sending, count = %Zd", __FUNCTION__, count); + + /* write the data into interrupt_out_buffer from userspace */ + buffer_size = le16_to_cpu(dev->interrupt_out_endpoint->wMaxPacketSize); + bytes_to_write = count > buffer_size ? buffer_size : count; + dbg(4," %s : buffer_size = %Zd, count = %Zd, bytes_to_write = %Zd", + __FUNCTION__, buffer_size, count, bytes_to_write); + + if (copy_from_user(dev->interrupt_out_buffer, buffer, bytes_to_write) != 0) { + retval = -EFAULT; + goto exit; + } + + /* send off the urb */ + usb_fill_int_urb( + dev->interrupt_out_urb, + dev->udev, + usb_sndintpipe(dev->udev, dev->interrupt_out_endpoint->bEndpointAddress), + dev->interrupt_out_buffer, + bytes_to_write, + adu_interrupt_out_callback, + dev, + dev->interrupt_in_endpoint->bInterval); + /* dev->interrupt_in_urb->transfer_flags |= URB_ASYNC_UNLINK; */ + dev->interrupt_out_urb->actual_length = bytes_to_write; + retval = usb_submit_urb(dev->interrupt_out_urb, GFP_KERNEL); + if (retval < 0) { + err("Couldn't submit interrupt_out_urb %d", retval); + goto exit; + } + + buffer += bytes_to_write; + count -= bytes_to_write; + + bytes_written += bytes_to_write; + } + } + + retval = bytes_written; + +exit: + /* unlock the device */ + up(&dev->sem); + + dbg(2," %s : leave, return value %d", __FUNCTION__, retval); + + return retval; +} + +/* file operations needed when we register this driver */ +static struct file_operations adu_fops = { + .owner = THIS_MODULE, + .read = adu_read, + .write = adu_write, + .open = adu_open, + .release = adu_release, +}; + +/* + * usb class driver info in order to get a minor number from the usb core, + * and to have the device registered with devfs and the driver core + */ +static struct usb_class_driver adu_class = { + .name = "usb/adutux%d", + .fops = &adu_fops, + .minor_base = ADU_MINOR_BASE, +}; + +/** + * adu_probe + * + * Called by the usb core when a new device is connected that it thinks + * this driver might be interested in. + */ +static int adu_probe(struct usb_interface *interface, + const struct usb_device_id *id) +{ + struct usb_device *udev = interface_to_usbdev(interface); + struct adu_device *dev = NULL; + struct usb_host_interface *iface_desc; + struct usb_endpoint_descriptor *endpoint; + int retval = -ENODEV; + int in_end_size; + int out_end_size; + int i; + + dbg(2," %s : enter", __FUNCTION__); + + if (udev == NULL) { + dev_err(&interface->dev, "udev is NULL.\n"); + goto exit; + } + + /* allocate memory for our device state and intialize it */ + dev = kzalloc(sizeof(struct adu_device), GFP_KERNEL); + if (dev == NULL) { + dev_err(&interface->dev, "Out of memory\n"); + retval = -ENOMEM; + goto exit; + } + + init_MUTEX(&dev->sem); + spin_lock_init(&dev->buflock); + dev->udev = udev; + init_waitqueue_head(&dev->read_wait); + init_waitqueue_head(&dev->write_wait); + + iface_desc = &interface->altsetting[0]; + + /* set up the endpoint information */ + for (i = 0; i < iface_desc->desc.bNumEndpoints; ++i) { + endpoint = &iface_desc->endpoint[i].desc; + + if (usb_endpoint_is_int_in(endpoint)) + dev->interrupt_in_endpoint = endpoint; + + if (usb_endpoint_is_int_out(endpoint)) + dev->interrupt_out_endpoint = endpoint; + } + if (dev->interrupt_in_endpoint == NULL) { + dev_err(&interface->dev, "interrupt in endpoint not found\n"); + goto error; + } + if (dev->interrupt_out_endpoint == NULL) { + dev_err(&interface->dev, "interrupt out endpoint not found\n"); + goto error; + } + + in_end_size = le16_to_cpu(dev->interrupt_in_endpoint->wMaxPacketSize); + out_end_size = le16_to_cpu(dev->interrupt_out_endpoint->wMaxPacketSize); + + dev->read_buffer_primary = kmalloc((4 * in_end_size), GFP_KERNEL); + if (!dev->read_buffer_primary) { + dev_err(&interface->dev, "Couldn't allocate read_buffer_primary\n"); + retval = -ENOMEM; + goto error; + } + + /* debug code prime the buffer */ + memset(dev->read_buffer_primary, 'a', in_end_size); + memset(dev->read_buffer_primary + in_end_size, 'b', in_end_size); + memset(dev->read_buffer_primary + (2 * in_end_size), 'c', in_end_size); + memset(dev->read_buffer_primary + (3 * in_end_size), 'd', in_end_size); + + dev->read_buffer_secondary = kmalloc((4 * in_end_size), GFP_KERNEL); + if (!dev->read_buffer_secondary) { + dev_err(&interface->dev, "Couldn't allocate read_buffer_secondary\n"); + retval = -ENOMEM; + goto error; + } + + /* debug code prime the buffer */ + memset(dev->read_buffer_secondary, 'e', in_end_size); + memset(dev->read_buffer_secondary + in_end_size, 'f', in_end_size); + memset(dev->read_buffer_secondary + (2 * in_end_size), 'g', in_end_size); + memset(dev->read_buffer_secondary + (3 * in_end_size), 'h', in_end_size); + + dev->interrupt_in_buffer = kmalloc(in_end_size, GFP_KERNEL); + if (!dev->interrupt_in_buffer) { + dev_err(&interface->dev, "Couldn't allocate interrupt_in_buffer\n"); + goto error; + } + + /* debug code prime the buffer */ + memset(dev->interrupt_in_buffer, 'i', in_end_size); + + dev->interrupt_in_urb = usb_alloc_urb(0, GFP_KERNEL); + if (!dev->interrupt_in_urb) { + dev_err(&interface->dev, "Couldn't allocate interrupt_in_urb\n"); + goto error; + } + dev->interrupt_out_buffer = kmalloc(out_end_size, GFP_KERNEL); + if (!dev->interrupt_out_buffer) { + dev_err(&interface->dev, "Couldn't allocate interrupt_out_buffer\n"); + goto error; + } + dev->interrupt_out_urb = usb_alloc_urb(0, GFP_KERNEL); + if (!dev->interrupt_out_urb) { + dev_err(&interface->dev, "Couldn't allocate interrupt_out_urb\n"); + goto error; + } + + if (!usb_string(udev, udev->descriptor.iSerialNumber, dev->serial_number, + sizeof(dev->serial_number))) { + dev_err(&interface->dev, "Could not retrieve serial number\n"); + goto error; + } + dbg(2," %s : serial_number=%s", __FUNCTION__, dev->serial_number); + + /* we can register the device now, as it is ready */ + usb_set_intfdata(interface, dev); + + retval = usb_register_dev(interface, &adu_class); + + if (retval) { + /* something prevented us from registering this driver */ + dev_err(&interface->dev, "Not able to get a minor for this device.\n"); + usb_set_intfdata(interface, NULL); + goto error; + } + + dev->minor = interface->minor; + + /* let the user know what node this device is now attached to */ + dev_info(&interface->dev, "ADU%d %s now attached to /dev/usb/adutux%d", + udev->descriptor.idProduct, dev->serial_number, + (dev->minor - ADU_MINOR_BASE)); +exit: + dbg(2," %s : leave, return value %p (dev)", __FUNCTION__, dev); + + return retval; + +error: + adu_delete(dev); + return retval; +} + +/** + * adu_disconnect + * + * Called by the usb core when the device is removed from the system. + */ +static void adu_disconnect(struct usb_interface *interface) +{ + struct adu_device *dev; + int minor; + + dbg(2," %s : enter", __FUNCTION__); + + mutex_lock(&disconnect_mutex); /* not interruptible */ + + dev = usb_get_intfdata(interface); + usb_set_intfdata(interface, NULL); + + down(&dev->sem); /* not interruptible */ + + minor = dev->minor; + + /* give back our minor */ + usb_deregister_dev(interface, &adu_class); + dev->minor = 0; + + /* if the device is not opened, then we clean up right now */ + dbg(2," %s : open count %d", __FUNCTION__, dev->open_count); + if (!dev->open_count) { + up(&dev->sem); + adu_delete(dev); + } else { + dev->udev = NULL; + up(&dev->sem); + } + + mutex_unlock(&disconnect_mutex); + + dev_info(&interface->dev, "ADU device adutux%d now disconnected", + (minor - ADU_MINOR_BASE)); + + dbg(2," %s : leave", __FUNCTION__); +} + +/* usb specific object needed to register this driver with the usb subsystem */ +static struct usb_driver adu_driver = { + .name = "adutux", + .probe = adu_probe, + .disconnect = adu_disconnect, + .id_table = device_table, +}; + +static int __init adu_init(void) +{ + int result; + + dbg(2," %s : enter", __FUNCTION__); + + /* register this driver with the USB subsystem */ + result = usb_register(&adu_driver); + if (result < 0) { + err("usb_register failed for the "__FILE__" driver. " + "Error number %d", result); + goto exit; + } + + info("adutux " DRIVER_DESC " " DRIVER_VERSION); + info("adutux is an experimental driver. Use at your own risk"); + +exit: + dbg(2," %s : leave, return value %d", __FUNCTION__, result); + + return result; +} + +static void __exit adu_exit(void) +{ + dbg(2," %s : enter", __FUNCTION__); + /* deregister this driver with the USB subsystem */ + usb_deregister(&adu_driver); + dbg(2," %s : leave", __FUNCTION__); +} + +module_init(adu_init); +module_exit(adu_exit); + +MODULE_AUTHOR(DRIVER_AUTHOR); +MODULE_DESCRIPTION(DRIVER_DESC); +MODULE_LICENSE("GPL"); diff --git a/drivers/usb/misc/auerswald.c b/drivers/usb/misc/auerswald.c index 1fef36e71c5..4fd2110b341 100644 --- a/drivers/usb/misc/auerswald.c +++ b/drivers/usb/misc/auerswald.c @@ -806,7 +806,7 @@ static void auerbuf_releasebuf( pauerbuf_t bp) 0 Initial, OK -EINPROGRESS during submission until end -ENOENT if urb is unlinked --ETIMEDOUT Transfer timed out, NAK +-ETIME Device did not respond -ENOMEM Memory Overflow -ENODEV Specified USB-device or bus doesn't exist -ENXIO URB already queued @@ -832,7 +832,7 @@ static int auerswald_status_retry (int status) { switch (status) { case 0: - case -ETIMEDOUT: + case -ETIME: case -EOVERFLOW: case -EAGAIN: case -EPIPE: @@ -1858,7 +1858,7 @@ static int auerchar_release (struct inode *inode, struct file *file) /*----------------------------------------------------------------------*/ /* File operation structure */ -static struct file_operations auerswald_fops = +static const struct file_operations auerswald_fops = { .owner = THIS_MODULE, .llseek = no_llseek, diff --git a/drivers/usb/misc/cypress_cy7c63.c b/drivers/usb/misc/cypress_cy7c63.c index 9c46746d5d0..b63b5f34b2a 100644 --- a/drivers/usb/misc/cypress_cy7c63.c +++ b/drivers/usb/misc/cypress_cy7c63.c @@ -209,7 +209,7 @@ static int cypress_probe(struct usb_interface *interface, dev = kzalloc(sizeof(*dev), GFP_KERNEL); if (dev == NULL) { dev_err(&interface->dev, "Out of memory!\n"); - goto error; + goto error_mem; } dev->udev = usb_get_dev(interface_to_usbdev(interface)); @@ -218,15 +218,26 @@ static int cypress_probe(struct usb_interface *interface, usb_set_intfdata(interface, dev); /* create device attribute files */ - device_create_file(&interface->dev, &dev_attr_port0); - device_create_file(&interface->dev, &dev_attr_port1); + retval = device_create_file(&interface->dev, &dev_attr_port0); + if (retval) + goto error; + retval = device_create_file(&interface->dev, &dev_attr_port1); + if (retval) + goto error; /* let the user know that the device is now attached */ dev_info(&interface->dev, "Cypress CY7C63xxx device now attached\n"); + return 0; - retval = 0; error: + device_remove_file(&interface->dev, &dev_attr_port0); + device_remove_file(&interface->dev, &dev_attr_port1); + usb_set_intfdata(interface, NULL); + usb_put_dev(dev->udev); + kfree(dev); + +error_mem: return retval; } diff --git a/drivers/usb/misc/cytherm.c b/drivers/usb/misc/cytherm.c index b20bec44555..04e87acd6e4 100644 --- a/drivers/usb/misc/cytherm.c +++ b/drivers/usb/misc/cytherm.c @@ -353,7 +353,7 @@ static int cytherm_probe(struct usb_interface *interface, dev = kzalloc (sizeof(struct usb_cytherm), GFP_KERNEL); if (dev == NULL) { dev_err (&interface->dev, "Out of memory\n"); - goto error; + goto error_mem; } dev->udev = usb_get_dev(udev); @@ -362,18 +362,35 @@ static int cytherm_probe(struct usb_interface *interface, dev->brightness = 0xFF; - device_create_file(&interface->dev, &dev_attr_brightness); - device_create_file(&interface->dev, &dev_attr_temp); - device_create_file(&interface->dev, &dev_attr_button); - device_create_file(&interface->dev, &dev_attr_port0); - device_create_file(&interface->dev, &dev_attr_port1); + retval = device_create_file(&interface->dev, &dev_attr_brightness); + if (retval) + goto error; + retval = device_create_file(&interface->dev, &dev_attr_temp); + if (retval) + goto error; + retval = device_create_file(&interface->dev, &dev_attr_button); + if (retval) + goto error; + retval = device_create_file(&interface->dev, &dev_attr_port0); + if (retval) + goto error; + retval = device_create_file(&interface->dev, &dev_attr_port1); + if (retval) + goto error; - dev_info (&interface->dev, + dev_info (&interface->dev, "Cypress thermometer device now attached\n"); return 0; - - error: +error: + device_remove_file(&interface->dev, &dev_attr_brightness); + device_remove_file(&interface->dev, &dev_attr_temp); + device_remove_file(&interface->dev, &dev_attr_button); + device_remove_file(&interface->dev, &dev_attr_port0); + device_remove_file(&interface->dev, &dev_attr_port1); + usb_set_intfdata (interface, NULL); + usb_put_dev(dev->udev); kfree(dev); +error_mem: return retval; } diff --git a/drivers/usb/misc/ftdi-elan.c b/drivers/usb/misc/ftdi-elan.c new file mode 100644 index 00000000000..b88a09497c2 --- /dev/null +++ b/drivers/usb/misc/ftdi-elan.c @@ -0,0 +1,2809 @@ +/* +* USB FTDI client driver for Elan Digital Systems's Uxxx adapters +* +* Copyright(C) 2006 Elan Digital Systems Limited +* http://www.elandigitalsystems.com +* +* Author and Maintainer - Tony Olech - Elan Digital Systems +* tony.olech@elandigitalsystems.com +* +* This program is free software;you can redistribute it and/or +* modify it under the terms of the GNU General Public License as +* published by the Free Software Foundation, version 2. +* +* +* This driver was written by Tony Olech(tony.olech@elandigitalsystems.com) +* based on various USB client drivers in the 2.6.15 linux kernel +* with constant reference to the 3rd Edition of Linux Device Drivers +* published by O'Reilly +* +* The U132 adapter is a USB to CardBus adapter specifically designed +* for PC cards that contain an OHCI host controller. Typical PC cards +* are the Orange Mobile 3G Option GlobeTrotter Fusion card. +* +* The U132 adapter will *NOT *work with PC cards that do not contain +* an OHCI controller. A simple way to test whether a PC card has an +* OHCI controller as an interface is to insert the PC card directly +* into a laptop(or desktop) with a CardBus slot and if "lspci" shows +* a new USB controller and "lsusb -v" shows a new OHCI Host Controller +* then there is a good chance that the U132 adapter will support the +* PC card.(you also need the specific client driver for the PC card) +* +* Please inform the Author and Maintainer about any PC cards that +* contain OHCI Host Controller and work when directly connected to +* an embedded CardBus slot but do not work when they are connected +* via an ELAN U132 adapter. +* +*/ +#include <linux/config.h> +#include <linux/kernel.h> +#include <linux/errno.h> +#include <linux/init.h> +#include <linux/list.h> +#include <linux/ioctl.h> +#include <linux/slab.h> +#include <linux/module.h> +#include <linux/kref.h> +#include <asm/uaccess.h> +#include <linux/usb.h> +#include <linux/workqueue.h> +#include <linux/platform_device.h> +MODULE_AUTHOR("Tony Olech"); +MODULE_DESCRIPTION("FTDI ELAN driver"); +MODULE_LICENSE("GPL"); +#define INT_MODULE_PARM(n, v) static int n = v;module_param(n, int, 0444) +extern struct platform_driver u132_platform_driver; +static struct workqueue_struct *status_queue; +static struct workqueue_struct *command_queue; +static struct workqueue_struct *respond_queue; +/* +* ftdi_module_lock exists to protect access to global variables +* +*/ +static struct semaphore ftdi_module_lock; +static int ftdi_instances = 0; +static struct list_head ftdi_static_list; +/* +* end of the global variables protected by ftdi_module_lock +*/ +#include "usb_u132.h" +#define TD_DEVNOTRESP 5 +/* Define these values to match your devices*/ +#define USB_FTDI_ELAN_VENDOR_ID 0x0403 +#define USB_FTDI_ELAN_PRODUCT_ID 0xd6ea +/* table of devices that work with this driver*/ +static struct usb_device_id ftdi_elan_table[] = { + {USB_DEVICE(USB_FTDI_ELAN_VENDOR_ID, USB_FTDI_ELAN_PRODUCT_ID)}, + { /* Terminating entry */ } +}; + +MODULE_DEVICE_TABLE(usb, ftdi_elan_table); +/* only the jtag(firmware upgrade device) interface requires +* a device file and corresponding minor number, but the +* interface is created unconditionally - I suppose it could +* be configured or not according to a module parameter. +* But since we(now) require one interface per device, +* and since it unlikely that a normal installation would +* require more than a couple of elan-ftdi devices, 8 seems +* like a reasonable limit to have here, and if someone +* really requires more than 8 devices, then they can frig the +* code and recompile +*/ +#define USB_FTDI_ELAN_MINOR_BASE 192 +#define COMMAND_BITS 5 +#define COMMAND_SIZE (1<<COMMAND_BITS) +#define COMMAND_MASK (COMMAND_SIZE-1) +struct u132_command { + u8 header; + u16 length; + u8 address; + u8 width; + u32 value; + int follows; + void *buffer; +}; +#define RESPOND_BITS 5 +#define RESPOND_SIZE (1<<RESPOND_BITS) +#define RESPOND_MASK (RESPOND_SIZE-1) +struct u132_respond { + u8 header; + u8 address; + u32 *value; + int *result; + struct completion wait_completion; +}; +struct u132_target { + void *endp; + struct urb *urb; + int toggle_bits; + int error_count; + int condition_code; + int repeat_number; + int halted; + int skipped; + int actual; + int non_null; + int active; + int abandoning; + void (*callback) (void *endp, struct urb *urb, u8 *buf, int len, + int toggle_bits, int error_count, int condition_code, + int repeat_number, int halted, int skipped, int actual, + int non_null); +}; +/* Structure to hold all of our device specific stuff*/ +struct usb_ftdi { + struct list_head ftdi_list; + struct semaphore u132_lock; + int command_next; + int command_head; + struct u132_command command[COMMAND_SIZE]; + int respond_next; + int respond_head; + struct u132_respond respond[RESPOND_SIZE]; + struct u132_target target[4]; + char device_name[16]; + unsigned synchronized:1; + unsigned enumerated:1; + unsigned registered:1; + unsigned initialized:1; + unsigned card_ejected:1; + int function; + int sequence_num; + int disconnected; + int gone_away; + int stuck_status; + int status_queue_delay; + struct semaphore sw_lock; + struct usb_device *udev; + struct usb_interface *interface; + struct usb_class_driver *class; + struct work_struct status_work; + struct work_struct command_work; + struct work_struct respond_work; + struct u132_platform_data platform_data; + struct resource resources[0]; + struct platform_device platform_dev; + unsigned char *bulk_in_buffer; + size_t bulk_in_size; + size_t bulk_in_last; + size_t bulk_in_left; + __u8 bulk_in_endpointAddr; + __u8 bulk_out_endpointAddr; + struct kref kref; + u32 controlreg; + u8 response[4 + 1024]; + int expected; + int recieved; + int ed_found; +}; +#define kref_to_usb_ftdi(d) container_of(d, struct usb_ftdi, kref) +#define platform_device_to_usb_ftdi(d) container_of(d, struct usb_ftdi, \ + platform_dev) +static struct usb_driver ftdi_elan_driver; +static void ftdi_elan_delete(struct kref *kref) +{ + struct usb_ftdi *ftdi = kref_to_usb_ftdi(kref); + dev_warn(&ftdi->udev->dev, "FREEING ftdi=%p\n", ftdi); + usb_put_dev(ftdi->udev); + ftdi->disconnected += 1; + down(&ftdi_module_lock); + list_del_init(&ftdi->ftdi_list); + ftdi_instances -= 1; + up(&ftdi_module_lock); + kfree(ftdi->bulk_in_buffer); + ftdi->bulk_in_buffer = NULL; +} + +static void ftdi_elan_put_kref(struct usb_ftdi *ftdi) +{ + kref_put(&ftdi->kref, ftdi_elan_delete); +} + +static void ftdi_elan_get_kref(struct usb_ftdi *ftdi) +{ + kref_get(&ftdi->kref); +} + +static void ftdi_elan_init_kref(struct usb_ftdi *ftdi) +{ + kref_init(&ftdi->kref); +} + +static void ftdi_status_requeue_work(struct usb_ftdi *ftdi, unsigned int delta) +{ + if (delta > 0) { + if (queue_delayed_work(status_queue, &ftdi->status_work, delta)) + return; + } else if (queue_work(status_queue, &ftdi->status_work)) + return; + kref_put(&ftdi->kref, ftdi_elan_delete); + return; +} + +static void ftdi_status_queue_work(struct usb_ftdi *ftdi, unsigned int delta) +{ + if (delta > 0) { + if (queue_delayed_work(status_queue, &ftdi->status_work, delta)) + kref_get(&ftdi->kref); + } else if (queue_work(status_queue, &ftdi->status_work)) + kref_get(&ftdi->kref); + return; +} + +static void ftdi_status_cancel_work(struct usb_ftdi *ftdi) +{ + if (cancel_delayed_work(&ftdi->status_work)) + kref_put(&ftdi->kref, ftdi_elan_delete); +} + +static void ftdi_command_requeue_work(struct usb_ftdi *ftdi, unsigned int delta) +{ + if (delta > 0) { + if (queue_delayed_work(command_queue, &ftdi->command_work, + delta)) + return; + } else if (queue_work(command_queue, &ftdi->command_work)) + return; + kref_put(&ftdi->kref, ftdi_elan_delete); + return; +} + +static void ftdi_command_queue_work(struct usb_ftdi *ftdi, unsigned int delta) +{ + if (delta > 0) { + if (queue_delayed_work(command_queue, &ftdi->command_work, + delta)) + kref_get(&ftdi->kref); + } else if (queue_work(command_queue, &ftdi->command_work)) + kref_get(&ftdi->kref); + return; +} + +static void ftdi_command_cancel_work(struct usb_ftdi *ftdi) +{ + if (cancel_delayed_work(&ftdi->command_work)) + kref_put(&ftdi->kref, ftdi_elan_delete); +} + +static void ftdi_response_requeue_work(struct usb_ftdi *ftdi, + unsigned int delta) +{ + if (delta > 0) { + if (queue_delayed_work(respond_queue, &ftdi->respond_work, + delta)) + return; + } else if (queue_work(respond_queue, &ftdi->respond_work)) + return; + kref_put(&ftdi->kref, ftdi_elan_delete); + return; +} + +static void ftdi_respond_queue_work(struct usb_ftdi *ftdi, unsigned int delta) +{ + if (delta > 0) { + if (queue_delayed_work(respond_queue, &ftdi->respond_work, + delta)) + kref_get(&ftdi->kref); + } else if (queue_work(respond_queue, &ftdi->respond_work)) + kref_get(&ftdi->kref); + return; +} + +static void ftdi_response_cancel_work(struct usb_ftdi *ftdi) +{ + if (cancel_delayed_work(&ftdi->respond_work)) + kref_put(&ftdi->kref, ftdi_elan_delete); +} + +void ftdi_elan_gone_away(struct platform_device *pdev) +{ + struct usb_ftdi *ftdi = platform_device_to_usb_ftdi(pdev); + ftdi->gone_away += 1; + ftdi_elan_put_kref(ftdi); +} + + +EXPORT_SYMBOL_GPL(ftdi_elan_gone_away); +void ftdi_release_platform_dev(struct device *dev) +{ + dev->parent = NULL; +} + +static void ftdi_elan_do_callback(struct usb_ftdi *ftdi, + struct u132_target *target, u8 *buffer, int length); +static void ftdi_elan_kick_command_queue(struct usb_ftdi *ftdi); +static void ftdi_elan_kick_respond_queue(struct usb_ftdi *ftdi); +static int ftdi_elan_setupOHCI(struct usb_ftdi *ftdi); +static int ftdi_elan_checkingPCI(struct usb_ftdi *ftdi); +static int ftdi_elan_enumeratePCI(struct usb_ftdi *ftdi); +static int ftdi_elan_synchronize(struct usb_ftdi *ftdi); +static int ftdi_elan_stuck_waiting(struct usb_ftdi *ftdi); +static int ftdi_elan_command_engine(struct usb_ftdi *ftdi); +static int ftdi_elan_respond_engine(struct usb_ftdi *ftdi); +static int ftdi_elan_hcd_init(struct usb_ftdi *ftdi) +{ + int result; + if (ftdi->platform_dev.dev.parent) + return -EBUSY; + ftdi_elan_get_kref(ftdi); + ftdi->platform_data.potpg = 100; + ftdi->platform_data.reset = NULL; + ftdi->platform_dev.id = ftdi->sequence_num; + ftdi->platform_dev.resource = ftdi->resources; + ftdi->platform_dev.num_resources = ARRAY_SIZE(ftdi->resources); + ftdi->platform_dev.dev.platform_data = &ftdi->platform_data; + ftdi->platform_dev.dev.parent = NULL; + ftdi->platform_dev.dev.release = ftdi_release_platform_dev; + ftdi->platform_dev.dev.dma_mask = NULL; + snprintf(ftdi->device_name, sizeof(ftdi->device_name), "u132_hcd"); + ftdi->platform_dev.name = ftdi->device_name; + dev_info(&ftdi->udev->dev, "requesting module '%s'\n", "u132_hcd"); + request_module("u132_hcd"); + dev_info(&ftdi->udev->dev, "registering '%s'\n", + ftdi->platform_dev.name); + result = platform_device_register(&ftdi->platform_dev); + return result; +} + +static void ftdi_elan_abandon_completions(struct usb_ftdi *ftdi) +{ + down(&ftdi->u132_lock); + while (ftdi->respond_next > ftdi->respond_head) { + struct u132_respond *respond = &ftdi->respond[RESPOND_MASK & + ftdi->respond_head++]; + *respond->result = -ESHUTDOWN; + *respond->value = 0; + complete(&respond->wait_completion); + } up(&ftdi->u132_lock); +} + +static void ftdi_elan_abandon_targets(struct usb_ftdi *ftdi) +{ + int ed_number = 4; + down(&ftdi->u132_lock); + while (ed_number-- > 0) { + struct u132_target *target = &ftdi->target[ed_number]; + if (target->active == 1) { + target->condition_code = TD_DEVNOTRESP; + up(&ftdi->u132_lock); + ftdi_elan_do_callback(ftdi, target, NULL, 0); + down(&ftdi->u132_lock); + } + } + ftdi->recieved = 0; + ftdi->expected = 4; + ftdi->ed_found = 0; + up(&ftdi->u132_lock); +} + +static void ftdi_elan_flush_targets(struct usb_ftdi *ftdi) +{ + int ed_number = 4; + down(&ftdi->u132_lock); + while (ed_number-- > 0) { + struct u132_target *target = &ftdi->target[ed_number]; + target->abandoning = 1; + wait_1:if (target->active == 1) { + int command_size = ftdi->command_next - + ftdi->command_head; + if (command_size < COMMAND_SIZE) { + struct u132_command *command = &ftdi->command[ + COMMAND_MASK & ftdi->command_next]; + command->header = 0x80 | (ed_number << 5) | 0x4; + command->length = 0x00; + command->address = 0x00; + command->width = 0x00; + command->follows = 0; + command->value = 0; + command->buffer = &command->value; + ftdi->command_next += 1; + ftdi_elan_kick_command_queue(ftdi); + } else { + up(&ftdi->u132_lock); + msleep(100); + down(&ftdi->u132_lock); + goto wait_1; + } + } + wait_2:if (target->active == 1) { + int command_size = ftdi->command_next - + ftdi->command_head; + if (command_size < COMMAND_SIZE) { + struct u132_command *command = &ftdi->command[ + COMMAND_MASK & ftdi->command_next]; + command->header = 0x90 | (ed_number << 5); + command->length = 0x00; + command->address = 0x00; + command->width = 0x00; + command->follows = 0; + command->value = 0; + command->buffer = &command->value; + ftdi->command_next += 1; + ftdi_elan_kick_command_queue(ftdi); + } else { + up(&ftdi->u132_lock); + msleep(100); + down(&ftdi->u132_lock); + goto wait_2; + } + } + } + ftdi->recieved = 0; + ftdi->expected = 4; + ftdi->ed_found = 0; + up(&ftdi->u132_lock); +} + +static void ftdi_elan_cancel_targets(struct usb_ftdi *ftdi) +{ + int ed_number = 4; + down(&ftdi->u132_lock); + while (ed_number-- > 0) { + struct u132_target *target = &ftdi->target[ed_number]; + target->abandoning = 1; + wait:if (target->active == 1) { + int command_size = ftdi->command_next - + ftdi->command_head; + if (command_size < COMMAND_SIZE) { + struct u132_command *command = &ftdi->command[ + COMMAND_MASK & ftdi->command_next]; + command->header = 0x80 | (ed_number << 5) | 0x4; + command->length = 0x00; + command->address = 0x00; + command->width = 0x00; + command->follows = 0; + command->value = 0; + command->buffer = &command->value; + ftdi->command_next += 1; + ftdi_elan_kick_command_queue(ftdi); + } else { + up(&ftdi->u132_lock); + msleep(100); + down(&ftdi->u132_lock); + goto wait; + } + } + } + ftdi->recieved = 0; + ftdi->expected = 4; + ftdi->ed_found = 0; + up(&ftdi->u132_lock); +} + +static void ftdi_elan_kick_command_queue(struct usb_ftdi *ftdi) +{ + ftdi_command_queue_work(ftdi, 0); + return; +} + +static void ftdi_elan_command_work(void *data) +{ + struct usb_ftdi *ftdi = data; + if (ftdi->disconnected > 0) { + ftdi_elan_put_kref(ftdi); + return; + } else { + int retval = ftdi_elan_command_engine(ftdi); + if (retval == -ESHUTDOWN) { + ftdi->disconnected += 1; + } else if (retval == -ENODEV) { + ftdi->disconnected += 1; + } else if (retval) + dev_err(&ftdi->udev->dev, "command error %d\n", retval); + ftdi_command_requeue_work(ftdi, msecs_to_jiffies(10)); + return; + } +} + +static void ftdi_elan_kick_respond_queue(struct usb_ftdi *ftdi) +{ + ftdi_respond_queue_work(ftdi, 0); + return; +} + +static void ftdi_elan_respond_work(void *data) +{ + struct usb_ftdi *ftdi = data; + if (ftdi->disconnected > 0) { + ftdi_elan_put_kref(ftdi); + return; + } else { + int retval = ftdi_elan_respond_engine(ftdi); + if (retval == 0) { + } else if (retval == -ESHUTDOWN) { + ftdi->disconnected += 1; + } else if (retval == -ENODEV) { + ftdi->disconnected += 1; + } else if (retval == -ENODEV) { + ftdi->disconnected += 1; + } else if (retval == -EILSEQ) { + ftdi->disconnected += 1; + } else { + ftdi->disconnected += 1; + dev_err(&ftdi->udev->dev, "respond error %d\n", retval); + } + if (ftdi->disconnected > 0) { + ftdi_elan_abandon_completions(ftdi); + ftdi_elan_abandon_targets(ftdi); + } + ftdi_response_requeue_work(ftdi, msecs_to_jiffies(10)); + return; + } +} + + +/* +* the sw_lock is initially held and will be freed +* after the FTDI has been synchronized +* +*/ +static void ftdi_elan_status_work(void *data) +{ + struct usb_ftdi *ftdi = data; + int work_delay_in_msec = 0; + if (ftdi->disconnected > 0) { + ftdi_elan_put_kref(ftdi); + return; + } else if (ftdi->synchronized == 0) { + down(&ftdi->sw_lock); + if (ftdi_elan_synchronize(ftdi) == 0) { + ftdi->synchronized = 1; + ftdi_command_queue_work(ftdi, 1); + ftdi_respond_queue_work(ftdi, 1); + up(&ftdi->sw_lock); + work_delay_in_msec = 100; + } else { + dev_err(&ftdi->udev->dev, "synchronize failed\n"); + up(&ftdi->sw_lock); + work_delay_in_msec = 10 *1000; + } + } else if (ftdi->stuck_status > 0) { + if (ftdi_elan_stuck_waiting(ftdi) == 0) { + ftdi->stuck_status = 0; + ftdi->synchronized = 0; + } else if ((ftdi->stuck_status++ % 60) == 1) { + dev_err(&ftdi->udev->dev, "WRONG type of card inserted " + "- please remove\n"); + } else + dev_err(&ftdi->udev->dev, "WRONG type of card inserted " + "- checked %d times\n", ftdi->stuck_status); + work_delay_in_msec = 100; + } else if (ftdi->enumerated == 0) { + if (ftdi_elan_enumeratePCI(ftdi) == 0) { + ftdi->enumerated = 1; + work_delay_in_msec = 250; + } else + work_delay_in_msec = 1000; + } else if (ftdi->initialized == 0) { + if (ftdi_elan_setupOHCI(ftdi) == 0) { + ftdi->initialized = 1; + work_delay_in_msec = 500; + } else { + dev_err(&ftdi->udev->dev, "initialized failed - trying " + "again in 10 seconds\n"); + work_delay_in_msec = 10 *1000; + } + } else if (ftdi->registered == 0) { + work_delay_in_msec = 10; + if (ftdi_elan_hcd_init(ftdi) == 0) { + ftdi->registered = 1; + } else + dev_err(&ftdi->udev->dev, "register failed\n"); + work_delay_in_msec = 250; + } else { + if (ftdi_elan_checkingPCI(ftdi) == 0) { + work_delay_in_msec = 250; + } else if (ftdi->controlreg & 0x00400000) { + if (ftdi->gone_away > 0) { + dev_err(&ftdi->udev->dev, "PCI device eject con" + "firmed platform_dev.dev.parent=%p plat" + "form_dev.dev=%p\n", + ftdi->platform_dev.dev.parent, + &ftdi->platform_dev.dev); + platform_device_unregister(&ftdi->platform_dev); + ftdi->platform_dev.dev.parent = NULL; + ftdi->registered = 0; + ftdi->enumerated = 0; + ftdi->card_ejected = 0; + ftdi->initialized = 0; + ftdi->gone_away = 0; + } else + ftdi_elan_flush_targets(ftdi); + work_delay_in_msec = 250; + } else { + dev_err(&ftdi->udev->dev, "PCI device has disappeared\n" + ); + ftdi_elan_cancel_targets(ftdi); + work_delay_in_msec = 500; + ftdi->enumerated = 0; + ftdi->initialized = 0; + } + } + if (ftdi->disconnected > 0) { + ftdi_elan_put_kref(ftdi); + return; + } else { + ftdi_status_requeue_work(ftdi, + msecs_to_jiffies(work_delay_in_msec)); + return; + } +} + + +/* +* file_operations for the jtag interface +* +* the usage count for the device is incremented on open() +* and decremented on release() +*/ +static int ftdi_elan_open(struct inode *inode, struct file *file) +{ + int subminor = iminor(inode); + struct usb_interface *interface = usb_find_interface(&ftdi_elan_driver, + subminor); + if (!interface) { + printk(KERN_ERR "can't find device for minor %d\n", subminor); + return -ENODEV; + } else { + struct usb_ftdi *ftdi = usb_get_intfdata(interface); + if (!ftdi) { + return -ENODEV; + } else { + if (down_interruptible(&ftdi->sw_lock)) { + return -EINTR; + } else { + ftdi_elan_get_kref(ftdi); + file->private_data = ftdi; + return 0; + } + } + } +} + +static int ftdi_elan_release(struct inode *inode, struct file *file) +{ + struct usb_ftdi *ftdi = (struct usb_ftdi *)file->private_data; + if (ftdi == NULL) + return -ENODEV; + up(&ftdi->sw_lock); /* decrement the count on our device */ + ftdi_elan_put_kref(ftdi); + return 0; +} + + +#define FTDI_ELAN_IOC_MAGIC 0xA1 +#define FTDI_ELAN_IOCDEBUG _IOC(_IOC_WRITE, FTDI_ELAN_IOC_MAGIC, 1, 132) +static int ftdi_elan_ioctl(struct inode *inode, struct file *file, + unsigned int cmd, unsigned long arg) +{ + switch (cmd) { + case FTDI_ELAN_IOCDEBUG:{ + char line[132]; + int size = strncpy_from_user(line, + (const char __user *)arg, sizeof(line)); + if (size < 0) { + return -EINVAL; + } else { + printk(KERN_ERR "TODO: ioctl %s\n", line); + return 0; + } + } + default: + return -EFAULT; + } +} + + +/* +* +* blocking bulk reads are used to get data from the device +* +*/ +static ssize_t ftdi_elan_read(struct file *file, char __user *buffer, + size_t count, loff_t *ppos) +{ + char data[30 *3 + 4]; + char *d = data; + int m = (sizeof(data) - 1) / 3; + int bytes_read = 0; + int retry_on_empty = 10; + int retry_on_timeout = 5; + struct usb_ftdi *ftdi = (struct usb_ftdi *)file->private_data; + if (ftdi->disconnected > 0) { + return -ENODEV; + } + data[0] = 0; + have:if (ftdi->bulk_in_left > 0) { + if (count-- > 0) { + char *p = ++ftdi->bulk_in_last + ftdi->bulk_in_buffer; + ftdi->bulk_in_left -= 1; + if (bytes_read < m) { + d += sprintf(d, " %02X", 0x000000FF & *p); + } else if (bytes_read > m) { + } else + d += sprintf(d, " .."); + if (copy_to_user(buffer++, p, 1)) { + return -EFAULT; + } else { + bytes_read += 1; + goto have; + } + } else + return bytes_read; + } + more:if (count > 0) { + int packet_bytes = 0; + int retval = usb_bulk_msg(ftdi->udev, + usb_rcvbulkpipe(ftdi->udev, ftdi->bulk_in_endpointAddr), + ftdi->bulk_in_buffer, ftdi->bulk_in_size, + &packet_bytes, msecs_to_jiffies(50)); + if (packet_bytes > 2) { + ftdi->bulk_in_left = packet_bytes - 2; + ftdi->bulk_in_last = 1; + goto have; + } else if (retval == -ETIMEDOUT) { + if (retry_on_timeout-- > 0) { + goto more; + } else if (bytes_read > 0) { + return bytes_read; + } else + return retval; + } else if (retval == 0) { + if (retry_on_empty-- > 0) { + goto more; + } else + return bytes_read; + } else + return retval; + } else + return bytes_read; +} + +static void ftdi_elan_write_bulk_callback(struct urb *urb, struct pt_regs *regs) +{ + struct usb_ftdi *ftdi = (struct usb_ftdi *)urb->context; + if (urb->status && !(urb->status == -ENOENT || urb->status == + -ECONNRESET || urb->status == -ESHUTDOWN)) { + dev_err(&ftdi->udev->dev, "urb=%p write bulk status received: %" + "d\n", urb, urb->status); + } + usb_buffer_free(urb->dev, urb->transfer_buffer_length, + urb->transfer_buffer, urb->transfer_dma); +} + +static int fill_buffer_with_all_queued_commands(struct usb_ftdi *ftdi, + char *buf, int command_size, int total_size) +{ + int ed_commands = 0; + int b = 0; + int I = command_size; + int i = ftdi->command_head; + while (I-- > 0) { + struct u132_command *command = &ftdi->command[COMMAND_MASK & + i++]; + int F = command->follows; + u8 *f = command->buffer; + if (command->header & 0x80) { + ed_commands |= 1 << (0x3 & (command->header >> 5)); + } + buf[b++] = command->header; + buf[b++] = (command->length >> 0) & 0x00FF; + buf[b++] = (command->length >> 8) & 0x00FF; + buf[b++] = command->address; + buf[b++] = command->width; + while (F-- > 0) { + buf[b++] = *f++; + } + } + return ed_commands; +} + +static int ftdi_elan_total_command_size(struct usb_ftdi *ftdi, int command_size) +{ + int total_size = 0; + int I = command_size; + int i = ftdi->command_head; + while (I-- > 0) { + struct u132_command *command = &ftdi->command[COMMAND_MASK & + i++]; + total_size += 5 + command->follows; + } return total_size; +} + +static int ftdi_elan_command_engine(struct usb_ftdi *ftdi) +{ + int retval; + char *buf; + int ed_commands; + int total_size; + struct urb *urb; + int command_size = ftdi->command_next - ftdi->command_head; + if (command_size == 0) + return 0; + total_size = ftdi_elan_total_command_size(ftdi, command_size); + urb = usb_alloc_urb(0, GFP_KERNEL); + if (!urb) { + dev_err(&ftdi->udev->dev, "could not get a urb to write %d comm" + "ands totaling %d bytes to the Uxxx\n", command_size, + total_size); + return -ENOMEM; + } + buf = usb_buffer_alloc(ftdi->udev, total_size, GFP_KERNEL, + &urb->transfer_dma); + if (!buf) { + dev_err(&ftdi->udev->dev, "could not get a buffer to write %d c" + "ommands totaling %d bytes to the Uxxx\n", command_size, + total_size); + usb_free_urb(urb); + return -ENOMEM; + } + ed_commands = fill_buffer_with_all_queued_commands(ftdi, buf, + command_size, total_size); + usb_fill_bulk_urb(urb, ftdi->udev, usb_sndbulkpipe(ftdi->udev, + ftdi->bulk_out_endpointAddr), buf, total_size, + ftdi_elan_write_bulk_callback, ftdi); + urb->transfer_flags |= URB_NO_TRANSFER_DMA_MAP; + if (ed_commands) { + char diag[40 *3 + 4]; + char *d = diag; + int m = total_size; + u8 *c = buf; + int s = (sizeof(diag) - 1) / 3; + diag[0] = 0; + while (s-- > 0 && m-- > 0) { + if (s > 0 || m == 0) { + d += sprintf(d, " %02X", *c++); + } else + d += sprintf(d, " .."); + } + } + retval = usb_submit_urb(urb, GFP_KERNEL); + if (retval) { + dev_err(&ftdi->udev->dev, "failed %d to submit urb %p to write " + "%d commands totaling %d bytes to the Uxxx\n", retval, + urb, command_size, total_size); + usb_buffer_free(ftdi->udev, total_size, buf, urb->transfer_dma); + usb_free_urb(urb); + return retval; + } + usb_free_urb(urb); /* release our reference to this urb, + the USB core will eventually free it entirely */ + ftdi->command_head += command_size; + ftdi_elan_kick_respond_queue(ftdi); + return 0; +} + +static void ftdi_elan_do_callback(struct usb_ftdi *ftdi, + struct u132_target *target, u8 *buffer, int length) +{ + struct urb *urb = target->urb; + int halted = target->halted; + int skipped = target->skipped; + int actual = target->actual; + int non_null = target->non_null; + int toggle_bits = target->toggle_bits; + int error_count = target->error_count; + int condition_code = target->condition_code; + int repeat_number = target->repeat_number; + void (*callback) (void *, struct urb *, u8 *, int, int, int, int, int, + int, int, int, int) = target->callback; + target->active -= 1; + target->callback = NULL; + (*callback) (target->endp, urb, buffer, length, toggle_bits, + error_count, condition_code, repeat_number, halted, skipped, + actual, non_null); +} + +static char *have_ed_set_response(struct usb_ftdi *ftdi, + struct u132_target *target, u16 ed_length, int ed_number, int ed_type, + char *b) +{ + int payload = (ed_length >> 0) & 0x07FF; + down(&ftdi->u132_lock); + target->actual = 0; + target->non_null = (ed_length >> 15) & 0x0001; + target->repeat_number = (ed_length >> 11) & 0x000F; + if (ed_type == 0x02) { + if (payload == 0 || target->abandoning > 0) { + target->abandoning = 0; + up(&ftdi->u132_lock); + ftdi_elan_do_callback(ftdi, target, 4 + ftdi->response, + payload); + ftdi->recieved = 0; + ftdi->expected = 4; + ftdi->ed_found = 0; + return ftdi->response; + } else { + ftdi->expected = 4 + payload; + ftdi->ed_found = 1; + up(&ftdi->u132_lock); + return b; + } + } else if (ed_type == 0x03) { + if (payload == 0 || target->abandoning > 0) { + target->abandoning = 0; + up(&ftdi->u132_lock); + ftdi_elan_do_callback(ftdi, target, 4 + ftdi->response, + payload); + ftdi->recieved = 0; + ftdi->expected = 4; + ftdi->ed_found = 0; + return ftdi->response; + } else { + ftdi->expected = 4 + payload; + ftdi->ed_found = 1; + up(&ftdi->u132_lock); + return b; + } + } else if (ed_type == 0x01) { + target->abandoning = 0; + up(&ftdi->u132_lock); + ftdi_elan_do_callback(ftdi, target, 4 + ftdi->response, + payload); + ftdi->recieved = 0; + ftdi->expected = 4; + ftdi->ed_found = 0; + return ftdi->response; + } else { + target->abandoning = 0; + up(&ftdi->u132_lock); + ftdi_elan_do_callback(ftdi, target, 4 + ftdi->response, + payload); + ftdi->recieved = 0; + ftdi->expected = 4; + ftdi->ed_found = 0; + return ftdi->response; + } +} + +static char *have_ed_get_response(struct usb_ftdi *ftdi, + struct u132_target *target, u16 ed_length, int ed_number, int ed_type, + char *b) +{ + down(&ftdi->u132_lock); + target->condition_code = TD_DEVNOTRESP; + target->actual = (ed_length >> 0) & 0x01FF; + target->non_null = (ed_length >> 15) & 0x0001; + target->repeat_number = (ed_length >> 11) & 0x000F; + up(&ftdi->u132_lock); + if (target->active) + ftdi_elan_do_callback(ftdi, target, NULL, 0); + target->abandoning = 0; + ftdi->recieved = 0; + ftdi->expected = 4; + ftdi->ed_found = 0; + return ftdi->response; +} + + +/* +* The engine tries to empty the FTDI fifo +* +* all responses found in the fifo data are dispatched thus +* the response buffer can only ever hold a maximum sized +* response from the Uxxx. +* +*/ +static int ftdi_elan_respond_engine(struct usb_ftdi *ftdi) +{ + u8 *b = ftdi->response + ftdi->recieved; + int bytes_read = 0; + int retry_on_empty = 1; + int retry_on_timeout = 3; + int empty_packets = 0; + read:{ + int packet_bytes = 0; + int retval = usb_bulk_msg(ftdi->udev, + usb_rcvbulkpipe(ftdi->udev, ftdi->bulk_in_endpointAddr), + ftdi->bulk_in_buffer, ftdi->bulk_in_size, + &packet_bytes, msecs_to_jiffies(500)); + char diag[30 *3 + 4]; + char *d = diag; + int m = packet_bytes; + u8 *c = ftdi->bulk_in_buffer; + int s = (sizeof(diag) - 1) / 3; + diag[0] = 0; + while (s-- > 0 && m-- > 0) { + if (s > 0 || m == 0) { + d += sprintf(d, " %02X", *c++); + } else + d += sprintf(d, " .."); + } + if (packet_bytes > 2) { + ftdi->bulk_in_left = packet_bytes - 2; + ftdi->bulk_in_last = 1; + goto have; + } else if (retval == -ETIMEDOUT) { + if (retry_on_timeout-- > 0) { + dev_err(&ftdi->udev->dev, "TIMED OUT with packe" + "t_bytes = %d with total %d bytes%s\n", + packet_bytes, bytes_read, diag); + goto more; + } else if (bytes_read > 0) { + dev_err(&ftdi->udev->dev, "ONLY %d bytes%s\n", + bytes_read, diag); + return -ENOMEM; + } else { + dev_err(&ftdi->udev->dev, "TIMED OUT with packe" + "t_bytes = %d with total %d bytes%s\n", + packet_bytes, bytes_read, diag); + return -ENOMEM; + } + } else if (retval == -EILSEQ) { + dev_err(&ftdi->udev->dev, "error = %d with packet_bytes" + " = %d with total %d bytes%s\n", retval, + packet_bytes, bytes_read, diag); + return retval; + } else if (retval) { + dev_err(&ftdi->udev->dev, "error = %d with packet_bytes" + " = %d with total %d bytes%s\n", retval, + packet_bytes, bytes_read, diag); + return retval; + } else if (packet_bytes == 2) { + unsigned char s0 = ftdi->bulk_in_buffer[0]; + unsigned char s1 = ftdi->bulk_in_buffer[1]; + empty_packets += 1; + if (s0 == 0x31 && s1 == 0x60) { + if (retry_on_empty-- > 0) { + goto more; + } else + return 0; + } else if (s0 == 0x31 && s1 == 0x00) { + if (retry_on_empty-- > 0) { + goto more; + } else + return 0; + } else { + if (retry_on_empty-- > 0) { + goto more; + } else + return 0; + } + } else if (packet_bytes == 1) { + if (retry_on_empty-- > 0) { + goto more; + } else + return 0; + } else { + if (retry_on_empty-- > 0) { + goto more; + } else + return 0; + } + } + more:{ + goto read; + } + have:if (ftdi->bulk_in_left > 0) { + u8 c = ftdi->bulk_in_buffer[++ftdi->bulk_in_last]; + bytes_read += 1; + ftdi->bulk_in_left -= 1; + if (ftdi->recieved == 0 && c == 0xFF) { + goto have; + } else + *b++ = c; + if (++ftdi->recieved < ftdi->expected) { + goto have; + } else if (ftdi->ed_found) { + int ed_number = (ftdi->response[0] >> 5) & 0x03; + u16 ed_length = (ftdi->response[2] << 8) | + ftdi->response[1]; + struct u132_target *target = &ftdi->target[ed_number]; + int payload = (ed_length >> 0) & 0x07FF; + char diag[30 *3 + 4]; + char *d = diag; + int m = payload; + u8 *c = 4 + ftdi->response; + int s = (sizeof(diag) - 1) / 3; + diag[0] = 0; + while (s-- > 0 && m-- > 0) { + if (s > 0 || m == 0) { + d += sprintf(d, " %02X", *c++); + } else + d += sprintf(d, " .."); + } + ftdi_elan_do_callback(ftdi, target, 4 + ftdi->response, + payload); + ftdi->recieved = 0; + ftdi->expected = 4; + ftdi->ed_found = 0; + b = ftdi->response; + goto have; + } else if (ftdi->expected == 8) { + u8 buscmd; + int respond_head = ftdi->respond_head++; + struct u132_respond *respond = &ftdi->respond[ + RESPOND_MASK & respond_head]; + u32 data = ftdi->response[7]; + data <<= 8; + data |= ftdi->response[6]; + data <<= 8; + data |= ftdi->response[5]; + data <<= 8; + data |= ftdi->response[4]; + *respond->value = data; + *respond->result = 0; + complete(&respond->wait_completion); + ftdi->recieved = 0; + ftdi->expected = 4; + ftdi->ed_found = 0; + b = ftdi->response; + buscmd = (ftdi->response[0] >> 0) & 0x0F; + if (buscmd == 0x00) { + } else if (buscmd == 0x02) { + } else if (buscmd == 0x06) { + } else if (buscmd == 0x0A) { + } else + dev_err(&ftdi->udev->dev, "Uxxx unknown(%0X) va" + "lue = %08X\n", buscmd, data); + goto have; + } else { + if ((ftdi->response[0] & 0x80) == 0x00) { + ftdi->expected = 8; + goto have; + } else { + int ed_number = (ftdi->response[0] >> 5) & 0x03; + int ed_type = (ftdi->response[0] >> 0) & 0x03; + u16 ed_length = (ftdi->response[2] << 8) | + ftdi->response[1]; + struct u132_target *target = &ftdi->target[ + ed_number]; + target->halted = (ftdi->response[0] >> 3) & + 0x01; + target->skipped = (ftdi->response[0] >> 2) & + 0x01; + target->toggle_bits = (ftdi->response[3] >> 6) + & 0x03; + target->error_count = (ftdi->response[3] >> 4) + & 0x03; + target->condition_code = (ftdi->response[ + 3] >> 0) & 0x0F; + if ((ftdi->response[0] & 0x10) == 0x00) { + b = have_ed_set_response(ftdi, target, + ed_length, ed_number, ed_type, + b); + goto have; + } else { + b = have_ed_get_response(ftdi, target, + ed_length, ed_number, ed_type, + b); + goto have; + } + } + } + } else + goto more; +} + + +/* +* create a urb, and a buffer for it, and copy the data to the urb +* +*/ +static ssize_t ftdi_elan_write(struct file *file, + const char __user *user_buffer, size_t count, + loff_t *ppos) +{ + int retval = 0; + struct urb *urb; + char *buf; + char data[30 *3 + 4]; + char *d = data; + const char __user *s = user_buffer; + int m = (sizeof(data) - 1) / 3; + struct usb_ftdi *ftdi = (struct usb_ftdi *)file->private_data; + if (ftdi->disconnected > 0) { + return -ENODEV; + } + if (count == 0) { + goto exit; + } + urb = usb_alloc_urb(0, GFP_KERNEL); + if (!urb) { + retval = -ENOMEM; + goto error_1; + } + buf = usb_buffer_alloc(ftdi->udev, count, GFP_KERNEL, + &urb->transfer_dma); + if (!buf) { + retval = -ENOMEM; + goto error_2; + } + if (copy_from_user(buf, user_buffer, count)) { + retval = -EFAULT; + goto error_3; + } + usb_fill_bulk_urb(urb, ftdi->udev, usb_sndbulkpipe(ftdi->udev, + ftdi->bulk_out_endpointAddr), buf, count, + ftdi_elan_write_bulk_callback, ftdi); + urb->transfer_flags |= URB_NO_TRANSFER_DMA_MAP; + retval = usb_submit_urb(urb, GFP_KERNEL); + if (retval) { + dev_err(&ftdi->udev->dev, "failed submitting write urb, error %" + "d\n", retval); + goto error_4; + } + usb_free_urb(urb); + exit:; + if (count > m) { + int I = m - 1; + while (I-- > 0) { + d += sprintf(d, " %02X", 0x000000FF & *s++); + } + d += sprintf(d, " .."); + } else { + int I = count; + while (I-- > 0) { + d += sprintf(d, " %02X", 0x000000FF & *s++); + } + } + return count; + error_4: error_3:usb_buffer_free(ftdi->udev, count, buf, + urb->transfer_dma); + error_2:usb_free_urb(urb); + error_1:return retval; +} + +static struct file_operations ftdi_elan_fops = { + .owner = THIS_MODULE, + .llseek = no_llseek, + .ioctl = ftdi_elan_ioctl, + .read = ftdi_elan_read, + .write = ftdi_elan_write, + .open = ftdi_elan_open, + .release = ftdi_elan_release, +}; + +/* +* usb class driver info in order to get a minor number from the usb core, +* and to have the device registered with the driver core +*/ +static struct usb_class_driver ftdi_elan_jtag_class = { + .name = "ftdi-%d-jtag", + .fops = &ftdi_elan_fops, + .minor_base = USB_FTDI_ELAN_MINOR_BASE, +}; + +/* +* the following definitions are for the +* ELAN FPGA state machgine processor that +* lies on the other side of the FTDI chip +*/ +#define cPCIu132rd 0x0 +#define cPCIu132wr 0x1 +#define cPCIiord 0x2 +#define cPCIiowr 0x3 +#define cPCImemrd 0x6 +#define cPCImemwr 0x7 +#define cPCIcfgrd 0xA +#define cPCIcfgwr 0xB +#define cPCInull 0xF +#define cU132cmd_status 0x0 +#define cU132flash 0x1 +#define cPIDsetup 0x0 +#define cPIDout 0x1 +#define cPIDin 0x2 +#define cPIDinonce 0x3 +#define cCCnoerror 0x0 +#define cCCcrc 0x1 +#define cCCbitstuff 0x2 +#define cCCtoggle 0x3 +#define cCCstall 0x4 +#define cCCnoresp 0x5 +#define cCCbadpid1 0x6 +#define cCCbadpid2 0x7 +#define cCCdataoverrun 0x8 +#define cCCdataunderrun 0x9 +#define cCCbuffoverrun 0xC +#define cCCbuffunderrun 0xD +#define cCCnotaccessed 0xF +static int ftdi_elan_write_reg(struct usb_ftdi *ftdi, u32 data) +{ + wait:if (ftdi->disconnected > 0) { + return -ENODEV; + } else { + int command_size; + down(&ftdi->u132_lock); + command_size = ftdi->command_next - ftdi->command_head; + if (command_size < COMMAND_SIZE) { + struct u132_command *command = &ftdi->command[ + COMMAND_MASK & ftdi->command_next]; + command->header = 0x00 | cPCIu132wr; + command->length = 0x04; + command->address = 0x00; + command->width = 0x00; + command->follows = 4; + command->value = data; + command->buffer = &command->value; + ftdi->command_next += 1; + ftdi_elan_kick_command_queue(ftdi); + up(&ftdi->u132_lock); + return 0; + } else { + up(&ftdi->u132_lock); + msleep(100); + goto wait; + } + } +} + +static int ftdi_elan_write_config(struct usb_ftdi *ftdi, int config_offset, + u8 width, u32 data) +{ + u8 addressofs = config_offset / 4; + wait:if (ftdi->disconnected > 0) { + return -ENODEV; + } else { + int command_size; + down(&ftdi->u132_lock); + command_size = ftdi->command_next - ftdi->command_head; + if (command_size < COMMAND_SIZE) { + struct u132_command *command = &ftdi->command[ + COMMAND_MASK & ftdi->command_next]; + command->header = 0x00 | (cPCIcfgwr & 0x0F); + command->length = 0x04; + command->address = addressofs; + command->width = 0x00 | (width & 0x0F); + command->follows = 4; + command->value = data; + command->buffer = &command->value; + ftdi->command_next += 1; + ftdi_elan_kick_command_queue(ftdi); + up(&ftdi->u132_lock); + return 0; + } else { + up(&ftdi->u132_lock); + msleep(100); + goto wait; + } + } +} + +static int ftdi_elan_write_pcimem(struct usb_ftdi *ftdi, int mem_offset, + u8 width, u32 data) +{ + u8 addressofs = mem_offset / 4; + wait:if (ftdi->disconnected > 0) { + return -ENODEV; + } else { + int command_size; + down(&ftdi->u132_lock); + command_size = ftdi->command_next - ftdi->command_head; + if (command_size < COMMAND_SIZE) { + struct u132_command *command = &ftdi->command[ + COMMAND_MASK & ftdi->command_next]; + command->header = 0x00 | (cPCImemwr & 0x0F); + command->length = 0x04; + command->address = addressofs; + command->width = 0x00 | (width & 0x0F); + command->follows = 4; + command->value = data; + command->buffer = &command->value; + ftdi->command_next += 1; + ftdi_elan_kick_command_queue(ftdi); + up(&ftdi->u132_lock); + return 0; + } else { + up(&ftdi->u132_lock); + msleep(100); + goto wait; + } + } +} + +int usb_ftdi_elan_write_pcimem(struct platform_device *pdev, int mem_offset, + u8 width, u32 data) +{ + struct usb_ftdi *ftdi = platform_device_to_usb_ftdi(pdev); + return ftdi_elan_write_pcimem(ftdi, mem_offset, width, data); +} + + +EXPORT_SYMBOL_GPL(usb_ftdi_elan_write_pcimem); +static int ftdi_elan_read_reg(struct usb_ftdi *ftdi, u32 *data) +{ + wait:if (ftdi->disconnected > 0) { + return -ENODEV; + } else { + int command_size; + int respond_size; + down(&ftdi->u132_lock); + command_size = ftdi->command_next - ftdi->command_head; + respond_size = ftdi->respond_next - ftdi->respond_head; + if (command_size < COMMAND_SIZE && respond_size < RESPOND_SIZE) + { + struct u132_command *command = &ftdi->command[ + COMMAND_MASK & ftdi->command_next]; + struct u132_respond *respond = &ftdi->respond[ + RESPOND_MASK & ftdi->respond_next]; + int result = -ENODEV; + respond->result = &result; + respond->header = command->header = 0x00 | cPCIu132rd; + command->length = 0x04; + respond->address = command->address = cU132cmd_status; + command->width = 0x00; + command->follows = 0; + command->value = 0; + command->buffer = NULL; + respond->value = data; + init_completion(&respond->wait_completion); + ftdi->command_next += 1; + ftdi->respond_next += 1; + ftdi_elan_kick_command_queue(ftdi); + up(&ftdi->u132_lock); + wait_for_completion(&respond->wait_completion); + return result; + } else { + up(&ftdi->u132_lock); + msleep(100); + goto wait; + } + } +} + +int usb_ftdi_elan_read_reg(struct platform_device *pdev, u32 *data) +{ + struct usb_ftdi *ftdi = platform_device_to_usb_ftdi(pdev); + return ftdi_elan_read_reg(ftdi, data); +} + + +EXPORT_SYMBOL_GPL(usb_ftdi_elan_read_reg); +static int ftdi_elan_read_config(struct usb_ftdi *ftdi, int config_offset, + u8 width, u32 *data) +{ + u8 addressofs = config_offset / 4; + wait:if (ftdi->disconnected > 0) { + return -ENODEV; + } else { + int command_size; + int respond_size; + down(&ftdi->u132_lock); + command_size = ftdi->command_next - ftdi->command_head; + respond_size = ftdi->respond_next - ftdi->respond_head; + if (command_size < COMMAND_SIZE && respond_size < RESPOND_SIZE) + { + struct u132_command *command = &ftdi->command[ + COMMAND_MASK & ftdi->command_next]; + struct u132_respond *respond = &ftdi->respond[ + RESPOND_MASK & ftdi->respond_next]; + int result = -ENODEV; + respond->result = &result; + respond->header = command->header = 0x00 | (cPCIcfgrd & + 0x0F); + command->length = 0x04; + respond->address = command->address = addressofs; + command->width = 0x00 | (width & 0x0F); + command->follows = 0; + command->value = 0; + command->buffer = NULL; + respond->value = data; + init_completion(&respond->wait_completion); + ftdi->command_next += 1; + ftdi->respond_next += 1; + ftdi_elan_kick_command_queue(ftdi); + up(&ftdi->u132_lock); + wait_for_completion(&respond->wait_completion); + return result; + } else { + up(&ftdi->u132_lock); + msleep(100); + goto wait; + } + } +} + +static int ftdi_elan_read_pcimem(struct usb_ftdi *ftdi, int mem_offset, + u8 width, u32 *data) +{ + u8 addressofs = mem_offset / 4; + wait:if (ftdi->disconnected > 0) { + return -ENODEV; + } else { + int command_size; + int respond_size; + down(&ftdi->u132_lock); + command_size = ftdi->command_next - ftdi->command_head; + respond_size = ftdi->respond_next - ftdi->respond_head; + if (command_size < COMMAND_SIZE && respond_size < RESPOND_SIZE) + { + struct u132_command *command = &ftdi->command[ + COMMAND_MASK & ftdi->command_next]; + struct u132_respond *respond = &ftdi->respond[ + RESPOND_MASK & ftdi->respond_next]; + int result = -ENODEV; + respond->result = &result; + respond->header = command->header = 0x00 | (cPCImemrd & + 0x0F); + command->length = 0x04; + respond->address = command->address = addressofs; + command->width = 0x00 | (width & 0x0F); + command->follows = 0; + command->value = 0; + command->buffer = NULL; + respond->value = data; + init_completion(&respond->wait_completion); + ftdi->command_next += 1; + ftdi->respond_next += 1; + ftdi_elan_kick_command_queue(ftdi); + up(&ftdi->u132_lock); + wait_for_completion(&respond->wait_completion); + return result; + } else { + up(&ftdi->u132_lock); + msleep(100); + goto wait; + } + } +} + +int usb_ftdi_elan_read_pcimem(struct platform_device *pdev, int mem_offset, + u8 width, u32 *data) +{ + struct usb_ftdi *ftdi = platform_device_to_usb_ftdi(pdev); + if (ftdi->initialized == 0) { + return -ENODEV; + } else + return ftdi_elan_read_pcimem(ftdi, mem_offset, width, data); +} + + +EXPORT_SYMBOL_GPL(usb_ftdi_elan_read_pcimem); +static int ftdi_elan_edset_setup(struct usb_ftdi *ftdi, u8 ed_number, + void *endp, struct urb *urb, u8 address, u8 ep_number, u8 toggle_bits, + void (*callback) (void *endp, struct urb *urb, u8 *buf, int len, + int toggle_bits, int error_count, int condition_code, int repeat_number, + int halted, int skipped, int actual, int non_null)) +{ + u8 ed = ed_number - 1; + wait:if (ftdi->disconnected > 0) { + return -ENODEV; + } else if (ftdi->initialized == 0) { + return -ENODEV; + } else { + int command_size; + down(&ftdi->u132_lock); + command_size = ftdi->command_next - ftdi->command_head; + if (command_size < COMMAND_SIZE) { + struct u132_target *target = &ftdi->target[ed]; + struct u132_command *command = &ftdi->command[ + COMMAND_MASK & ftdi->command_next]; + command->header = 0x80 | (ed << 5); + command->length = 0x8007; + command->address = (toggle_bits << 6) | (ep_number << 2) + | (address << 0); + command->width = usb_maxpacket(urb->dev, urb->pipe, + usb_pipeout(urb->pipe)); + command->follows = 8; + command->value = 0; + command->buffer = urb->setup_packet; + target->callback = callback; + target->endp = endp; + target->urb = urb; + target->active = 1; + ftdi->command_next += 1; + ftdi_elan_kick_command_queue(ftdi); + up(&ftdi->u132_lock); + return 0; + } else { + up(&ftdi->u132_lock); + msleep(100); + goto wait; + } + } +} + +int usb_ftdi_elan_edset_setup(struct platform_device *pdev, u8 ed_number, + void *endp, struct urb *urb, u8 address, u8 ep_number, u8 toggle_bits, + void (*callback) (void *endp, struct urb *urb, u8 *buf, int len, + int toggle_bits, int error_count, int condition_code, int repeat_number, + int halted, int skipped, int actual, int non_null)) +{ + struct usb_ftdi *ftdi = platform_device_to_usb_ftdi(pdev); + return ftdi_elan_edset_setup(ftdi, ed_number, endp, urb, address, + ep_number, toggle_bits, callback); +} + + +EXPORT_SYMBOL_GPL(usb_ftdi_elan_edset_setup); +static int ftdi_elan_edset_input(struct usb_ftdi *ftdi, u8 ed_number, + void *endp, struct urb *urb, u8 address, u8 ep_number, u8 toggle_bits, + void (*callback) (void *endp, struct urb *urb, u8 *buf, int len, + int toggle_bits, int error_count, int condition_code, int repeat_number, + int halted, int skipped, int actual, int non_null)) +{ + u8 ed = ed_number - 1; + wait:if (ftdi->disconnected > 0) { + return -ENODEV; + } else if (ftdi->initialized == 0) { + return -ENODEV; + } else { + int command_size; + down(&ftdi->u132_lock); + command_size = ftdi->command_next - ftdi->command_head; + if (command_size < COMMAND_SIZE) { + struct u132_target *target = &ftdi->target[ed]; + struct u132_command *command = &ftdi->command[ + COMMAND_MASK & ftdi->command_next]; + int remaining_length = urb->transfer_buffer_length - + urb->actual_length; + command->header = 0x82 | (ed << 5); + if (remaining_length == 0) { + command->length = 0x0000; + } else if (remaining_length > 1024) { + command->length = 0x8000 | 1023; + } else + command->length = 0x8000 | (remaining_length - + 1); + command->address = (toggle_bits << 6) | (ep_number << 2) + | (address << 0); + command->width = usb_maxpacket(urb->dev, urb->pipe, + usb_pipeout(urb->pipe)); + command->follows = 0; + command->value = 0; + command->buffer = NULL; + target->callback = callback; + target->endp = endp; + target->urb = urb; + target->active = 1; + ftdi->command_next += 1; + ftdi_elan_kick_command_queue(ftdi); + up(&ftdi->u132_lock); + return 0; + } else { + up(&ftdi->u132_lock); + msleep(100); + goto wait; + } + } +} + +int usb_ftdi_elan_edset_input(struct platform_device *pdev, u8 ed_number, + void *endp, struct urb *urb, u8 address, u8 ep_number, u8 toggle_bits, + void (*callback) (void *endp, struct urb *urb, u8 *buf, int len, + int toggle_bits, int error_count, int condition_code, int repeat_number, + int halted, int skipped, int actual, int non_null)) +{ + struct usb_ftdi *ftdi = platform_device_to_usb_ftdi(pdev); + return ftdi_elan_edset_input(ftdi, ed_number, endp, urb, address, + ep_number, toggle_bits, callback); +} + + +EXPORT_SYMBOL_GPL(usb_ftdi_elan_edset_input); +static int ftdi_elan_edset_empty(struct usb_ftdi *ftdi, u8 ed_number, + void *endp, struct urb *urb, u8 address, u8 ep_number, u8 toggle_bits, + void (*callback) (void *endp, struct urb *urb, u8 *buf, int len, + int toggle_bits, int error_count, int condition_code, int repeat_number, + int halted, int skipped, int actual, int non_null)) +{ + u8 ed = ed_number - 1; + wait:if (ftdi->disconnected > 0) { + return -ENODEV; + } else if (ftdi->initialized == 0) { + return -ENODEV; + } else { + int command_size; + down(&ftdi->u132_lock); + command_size = ftdi->command_next - ftdi->command_head; + if (command_size < COMMAND_SIZE) { + struct u132_target *target = &ftdi->target[ed]; + struct u132_command *command = &ftdi->command[ + COMMAND_MASK & ftdi->command_next]; + command->header = 0x81 | (ed << 5); + command->length = 0x0000; + command->address = (toggle_bits << 6) | (ep_number << 2) + | (address << 0); + command->width = usb_maxpacket(urb->dev, urb->pipe, + usb_pipeout(urb->pipe)); + command->follows = 0; + command->value = 0; + command->buffer = NULL; + target->callback = callback; + target->endp = endp; + target->urb = urb; + target->active = 1; + ftdi->command_next += 1; + ftdi_elan_kick_command_queue(ftdi); + up(&ftdi->u132_lock); + return 0; + } else { + up(&ftdi->u132_lock); + msleep(100); + goto wait; + } + } +} + +int usb_ftdi_elan_edset_empty(struct platform_device *pdev, u8 ed_number, + void *endp, struct urb *urb, u8 address, u8 ep_number, u8 toggle_bits, + void (*callback) (void *endp, struct urb *urb, u8 *buf, int len, + int toggle_bits, int error_count, int condition_code, int repeat_number, + int halted, int skipped, int actual, int non_null)) +{ + struct usb_ftdi *ftdi = platform_device_to_usb_ftdi(pdev); + return ftdi_elan_edset_empty(ftdi, ed_number, endp, urb, address, + ep_number, toggle_bits, callback); +} + + +EXPORT_SYMBOL_GPL(usb_ftdi_elan_edset_empty); +static int ftdi_elan_edset_output(struct usb_ftdi *ftdi, u8 ed_number, + void *endp, struct urb *urb, u8 address, u8 ep_number, u8 toggle_bits, + void (*callback) (void *endp, struct urb *urb, u8 *buf, int len, + int toggle_bits, int error_count, int condition_code, int repeat_number, + int halted, int skipped, int actual, int non_null)) +{ + u8 ed = ed_number - 1; + wait:if (ftdi->disconnected > 0) { + return -ENODEV; + } else if (ftdi->initialized == 0) { + return -ENODEV; + } else { + int command_size; + down(&ftdi->u132_lock); + command_size = ftdi->command_next - ftdi->command_head; + if (command_size < COMMAND_SIZE) { + u8 *b; + u16 urb_size; + int i = 0; + char data[30 *3 + 4]; + char *d = data; + int m = (sizeof(data) - 1) / 3; + int l = 0; + struct u132_target *target = &ftdi->target[ed]; + struct u132_command *command = &ftdi->command[ + COMMAND_MASK & ftdi->command_next]; + command->header = 0x81 | (ed << 5); + command->address = (toggle_bits << 6) | (ep_number << 2) + | (address << 0); + command->width = usb_maxpacket(urb->dev, urb->pipe, + usb_pipeout(urb->pipe)); + command->follows = min(1024, + urb->transfer_buffer_length - + urb->actual_length); + command->value = 0; + command->buffer = urb->transfer_buffer + + urb->actual_length; + command->length = 0x8000 | (command->follows - 1); + b = command->buffer; + urb_size = command->follows; + data[0] = 0; + while (urb_size-- > 0) { + if (i > m) { + } else if (i++ < m) { + int w = sprintf(d, " %02X", *b++); + d += w; + l += w; + } else + d += sprintf(d, " .."); + } + target->callback = callback; + target->endp = endp; + target->urb = urb; + target->active = 1; + ftdi->command_next += 1; + ftdi_elan_kick_command_queue(ftdi); + up(&ftdi->u132_lock); + return 0; + } else { + up(&ftdi->u132_lock); + msleep(100); + goto wait; + } + } +} + +int usb_ftdi_elan_edset_output(struct platform_device *pdev, u8 ed_number, + void *endp, struct urb *urb, u8 address, u8 ep_number, u8 toggle_bits, + void (*callback) (void *endp, struct urb *urb, u8 *buf, int len, + int toggle_bits, int error_count, int condition_code, int repeat_number, + int halted, int skipped, int actual, int non_null)) +{ + struct usb_ftdi *ftdi = platform_device_to_usb_ftdi(pdev); + return ftdi_elan_edset_output(ftdi, ed_number, endp, urb, address, + ep_number, toggle_bits, callback); +} + + +EXPORT_SYMBOL_GPL(usb_ftdi_elan_edset_output); +static int ftdi_elan_edset_single(struct usb_ftdi *ftdi, u8 ed_number, + void *endp, struct urb *urb, u8 address, u8 ep_number, u8 toggle_bits, + void (*callback) (void *endp, struct urb *urb, u8 *buf, int len, + int toggle_bits, int error_count, int condition_code, int repeat_number, + int halted, int skipped, int actual, int non_null)) +{ + u8 ed = ed_number - 1; + wait:if (ftdi->disconnected > 0) { + return -ENODEV; + } else if (ftdi->initialized == 0) { + return -ENODEV; + } else { + int command_size; + down(&ftdi->u132_lock); + command_size = ftdi->command_next - ftdi->command_head; + if (command_size < COMMAND_SIZE) { + int remaining_length = urb->transfer_buffer_length - + urb->actual_length; + struct u132_target *target = &ftdi->target[ed]; + struct u132_command *command = &ftdi->command[ + COMMAND_MASK & ftdi->command_next]; + command->header = 0x83 | (ed << 5); + if (remaining_length == 0) { + command->length = 0x0000; + } else if (remaining_length > 1024) { + command->length = 0x8000 | 1023; + } else + command->length = 0x8000 | (remaining_length - + 1); + command->address = (toggle_bits << 6) | (ep_number << 2) + | (address << 0); + command->width = usb_maxpacket(urb->dev, urb->pipe, + usb_pipeout(urb->pipe)); + command->follows = 0; + command->value = 0; + command->buffer = NULL; + target->callback = callback; + target->endp = endp; + target->urb = urb; + target->active = 1; + ftdi->command_next += 1; + ftdi_elan_kick_command_queue(ftdi); + up(&ftdi->u132_lock); + return 0; + } else { + up(&ftdi->u132_lock); + msleep(100); + goto wait; + } + } +} + +int usb_ftdi_elan_edset_single(struct platform_device *pdev, u8 ed_number, + void *endp, struct urb *urb, u8 address, u8 ep_number, u8 toggle_bits, + void (*callback) (void *endp, struct urb *urb, u8 *buf, int len, + int toggle_bits, int error_count, int condition_code, int repeat_number, + int halted, int skipped, int actual, int non_null)) +{ + struct usb_ftdi *ftdi = platform_device_to_usb_ftdi(pdev); + return ftdi_elan_edset_single(ftdi, ed_number, endp, urb, address, + ep_number, toggle_bits, callback); +} + + +EXPORT_SYMBOL_GPL(usb_ftdi_elan_edset_single); +static int ftdi_elan_edset_flush(struct usb_ftdi *ftdi, u8 ed_number, + void *endp) +{ + u8 ed = ed_number - 1; + if (ftdi->disconnected > 0) { + return -ENODEV; + } else if (ftdi->initialized == 0) { + return -ENODEV; + } else { + struct u132_target *target = &ftdi->target[ed]; + down(&ftdi->u132_lock); + if (target->abandoning > 0) { + up(&ftdi->u132_lock); + return 0; + } else { + target->abandoning = 1; + wait_1:if (target->active == 1) { + int command_size = ftdi->command_next - + ftdi->command_head; + if (command_size < COMMAND_SIZE) { + struct u132_command *command = + &ftdi->command[COMMAND_MASK & + ftdi->command_next]; + command->header = 0x80 | (ed << 5) | + 0x4; + command->length = 0x00; + command->address = 0x00; + command->width = 0x00; + command->follows = 0; + command->value = 0; + command->buffer = &command->value; + ftdi->command_next += 1; + ftdi_elan_kick_command_queue(ftdi); + } else { + up(&ftdi->u132_lock); + msleep(100); + down(&ftdi->u132_lock); + goto wait_1; + } + } + up(&ftdi->u132_lock); + return 0; + } + } +} + +int usb_ftdi_elan_edset_flush(struct platform_device *pdev, u8 ed_number, + void *endp) +{ + struct usb_ftdi *ftdi = platform_device_to_usb_ftdi(pdev); + return ftdi_elan_edset_flush(ftdi, ed_number, endp); +} + + +EXPORT_SYMBOL_GPL(usb_ftdi_elan_edset_flush); +static int ftdi_elan_flush_input_fifo(struct usb_ftdi *ftdi) +{ + int retry_on_empty = 10; + int retry_on_timeout = 5; + int retry_on_status = 20; + more:{ + int packet_bytes = 0; + int retval = usb_bulk_msg(ftdi->udev, + usb_rcvbulkpipe(ftdi->udev, ftdi->bulk_in_endpointAddr), + ftdi->bulk_in_buffer, ftdi->bulk_in_size, + &packet_bytes, msecs_to_jiffies(100)); + if (packet_bytes > 2) { + char diag[30 *3 + 4]; + char *d = diag; + int m = (sizeof(diag) - 1) / 3; + char *b = ftdi->bulk_in_buffer; + int bytes_read = 0; + diag[0] = 0; + while (packet_bytes-- > 0) { + char c = *b++; + if (bytes_read < m) { + d += sprintf(d, " %02X", + 0x000000FF & c); + } else if (bytes_read > m) { + } else + d += sprintf(d, " .."); + bytes_read += 1; + continue; + } + goto more; + } else if (packet_bytes > 1) { + char s1 = ftdi->bulk_in_buffer[0]; + char s2 = ftdi->bulk_in_buffer[1]; + if (s1 == 0x31 && s2 == 0x60) { + return 0; + } else if (retry_on_status-- > 0) { + goto more; + } else { + dev_err(&ftdi->udev->dev, "STATUS ERROR retry l" + "imit reached\n"); + return -EFAULT; + } + } else if (packet_bytes > 0) { + char b1 = ftdi->bulk_in_buffer[0]; + dev_err(&ftdi->udev->dev, "only one byte flushed from F" + "TDI = %02X\n", b1); + if (retry_on_status-- > 0) { + goto more; + } else { + dev_err(&ftdi->udev->dev, "STATUS ERROR retry l" + "imit reached\n"); + return -EFAULT; + } + } else if (retval == -ETIMEDOUT) { + if (retry_on_timeout-- > 0) { + goto more; + } else { + dev_err(&ftdi->udev->dev, "TIMED OUT retry limi" + "t reached\n"); + return -ENOMEM; + } + } else if (retval == 0) { + if (retry_on_empty-- > 0) { + goto more; + } else { + dev_err(&ftdi->udev->dev, "empty packet retry l" + "imit reached\n"); + return -ENOMEM; + } + } else { + dev_err(&ftdi->udev->dev, "error = %d\n", retval); + return retval; + } + } + return -1; +} + + +/* +* send the long flush sequence +* +*/ +static int ftdi_elan_synchronize_flush(struct usb_ftdi *ftdi) +{ + int retval; + struct urb *urb; + char *buf; + int I = 257; + int i = 0; + urb = usb_alloc_urb(0, GFP_KERNEL); + if (!urb) { + dev_err(&ftdi->udev->dev, "could not alloc a urb for flush sequ" + "ence\n"); + return -ENOMEM; + } + buf = usb_buffer_alloc(ftdi->udev, I, GFP_KERNEL, &urb->transfer_dma); + if (!buf) { + dev_err(&ftdi->udev->dev, "could not get a buffer for flush seq" + "uence\n"); + usb_free_urb(urb); + return -ENOMEM; + } + while (I-- > 0) + buf[i++] = 0x55; + usb_fill_bulk_urb(urb, ftdi->udev, usb_sndbulkpipe(ftdi->udev, + ftdi->bulk_out_endpointAddr), buf, i, + ftdi_elan_write_bulk_callback, ftdi); + urb->transfer_flags |= URB_NO_TRANSFER_DMA_MAP; + retval = usb_submit_urb(urb, GFP_KERNEL); + if (retval) { + dev_err(&ftdi->udev->dev, "failed to submit urb containing the " + "flush sequence\n"); + usb_buffer_free(ftdi->udev, i, buf, urb->transfer_dma); + usb_free_urb(urb); + return -ENOMEM; + } + usb_free_urb(urb); + return 0; +} + + +/* +* send the reset sequence +* +*/ +static int ftdi_elan_synchronize_reset(struct usb_ftdi *ftdi) +{ + int retval; + struct urb *urb; + char *buf; + int I = 4; + int i = 0; + urb = usb_alloc_urb(0, GFP_KERNEL); + if (!urb) { + dev_err(&ftdi->udev->dev, "could not get a urb for the reset se" + "quence\n"); + return -ENOMEM; + } + buf = usb_buffer_alloc(ftdi->udev, I, GFP_KERNEL, &urb->transfer_dma); + if (!buf) { + dev_err(&ftdi->udev->dev, "could not get a buffer for the reset" + " sequence\n"); + usb_free_urb(urb); + return -ENOMEM; + } + buf[i++] = 0x55; + buf[i++] = 0xAA; + buf[i++] = 0x5A; + buf[i++] = 0xA5; + usb_fill_bulk_urb(urb, ftdi->udev, usb_sndbulkpipe(ftdi->udev, + ftdi->bulk_out_endpointAddr), buf, i, + ftdi_elan_write_bulk_callback, ftdi); + urb->transfer_flags |= URB_NO_TRANSFER_DMA_MAP; + retval = usb_submit_urb(urb, GFP_KERNEL); + if (retval) { + dev_err(&ftdi->udev->dev, "failed to submit urb containing the " + "reset sequence\n"); + usb_buffer_free(ftdi->udev, i, buf, urb->transfer_dma); + usb_free_urb(urb); + return -ENOMEM; + } + usb_free_urb(urb); + return 0; +} + +static int ftdi_elan_synchronize(struct usb_ftdi *ftdi) +{ + int retval; + int long_stop = 10; + int retry_on_timeout = 5; + int retry_on_empty = 10; + int err_count = 0; + retval = ftdi_elan_flush_input_fifo(ftdi); + if (retval) + return retval; + ftdi->bulk_in_left = 0; + ftdi->bulk_in_last = -1; + while (long_stop-- > 0) { + int read_stop; + int read_stuck; + retval = ftdi_elan_synchronize_flush(ftdi); + if (retval) + return retval; + retval = ftdi_elan_flush_input_fifo(ftdi); + if (retval) + return retval; + reset:retval = ftdi_elan_synchronize_reset(ftdi); + if (retval) + return retval; + read_stop = 100; + read_stuck = 10; + read:{ + int packet_bytes = 0; + retval = usb_bulk_msg(ftdi->udev, + usb_rcvbulkpipe(ftdi->udev, + ftdi->bulk_in_endpointAddr), + ftdi->bulk_in_buffer, ftdi->bulk_in_size, + &packet_bytes, msecs_to_jiffies(500)); + if (packet_bytes > 2) { + char diag[30 *3 + 4]; + char *d = diag; + int m = (sizeof(diag) - 1) / 3; + char *b = ftdi->bulk_in_buffer; + int bytes_read = 0; + unsigned char c = 0; + diag[0] = 0; + while (packet_bytes-- > 0) { + c = *b++; + if (bytes_read < m) { + d += sprintf(d, " %02X", c); + } else if (bytes_read > m) { + } else + d += sprintf(d, " .."); + bytes_read += 1; + continue; + } + if (c == 0x7E) { + return 0; + } else { + if (c == 0x55) { + goto read; + } else if (read_stop-- > 0) { + goto read; + } else { + dev_err(&ftdi->udev->dev, "retr" + "y limit reached\n"); + continue; + } + } + } else if (packet_bytes > 1) { + unsigned char s1 = ftdi->bulk_in_buffer[0]; + unsigned char s2 = ftdi->bulk_in_buffer[1]; + if (s1 == 0x31 && s2 == 0x00) { + if (read_stuck-- > 0) { + goto read; + } else + goto reset; + } else if (s1 == 0x31 && s2 == 0x60) { + if (read_stop-- > 0) { + goto read; + } else { + dev_err(&ftdi->udev->dev, "retr" + "y limit reached\n"); + continue; + } + } else { + if (read_stop-- > 0) { + goto read; + } else { + dev_err(&ftdi->udev->dev, "retr" + "y limit reached\n"); + continue; + } + } + } else if (packet_bytes > 0) { + if (read_stop-- > 0) { + goto read; + } else { + dev_err(&ftdi->udev->dev, "retry limit " + "reached\n"); + continue; + } + } else if (retval == -ETIMEDOUT) { + if (retry_on_timeout-- > 0) { + goto read; + } else { + dev_err(&ftdi->udev->dev, "TIMED OUT re" + "try limit reached\n"); + continue; + } + } else if (retval == 0) { + if (retry_on_empty-- > 0) { + goto read; + } else { + dev_err(&ftdi->udev->dev, "empty packet" + " retry limit reached\n"); + continue; + } + } else { + err_count += 1; + dev_err(&ftdi->udev->dev, "error = %d\n", + retval); + if (read_stop-- > 0) { + goto read; + } else { + dev_err(&ftdi->udev->dev, "retry limit " + "reached\n"); + continue; + } + } + } + } + dev_err(&ftdi->udev->dev, "failed to synchronize\n"); + return -EFAULT; +} + +static int ftdi_elan_stuck_waiting(struct usb_ftdi *ftdi) +{ + int retry_on_empty = 10; + int retry_on_timeout = 5; + int retry_on_status = 50; + more:{ + int packet_bytes = 0; + int retval = usb_bulk_msg(ftdi->udev, + usb_rcvbulkpipe(ftdi->udev, ftdi->bulk_in_endpointAddr), + ftdi->bulk_in_buffer, ftdi->bulk_in_size, + &packet_bytes, msecs_to_jiffies(1000)); + if (packet_bytes > 2) { + char diag[30 *3 + 4]; + char *d = diag; + int m = (sizeof(diag) - 1) / 3; + char *b = ftdi->bulk_in_buffer; + int bytes_read = 0; + diag[0] = 0; + while (packet_bytes-- > 0) { + char c = *b++; + if (bytes_read < m) { + d += sprintf(d, " %02X", + 0x000000FF & c); + } else if (bytes_read > m) { + } else + d += sprintf(d, " .."); + bytes_read += 1; + continue; + } + goto more; + } else if (packet_bytes > 1) { + char s1 = ftdi->bulk_in_buffer[0]; + char s2 = ftdi->bulk_in_buffer[1]; + if (s1 == 0x31 && s2 == 0x60) { + return 0; + } else if (retry_on_status-- > 0) { + msleep(5); + goto more; + } else + return -EFAULT; + } else if (packet_bytes > 0) { + char b1 = ftdi->bulk_in_buffer[0]; + dev_err(&ftdi->udev->dev, "only one byte flushed from F" + "TDI = %02X\n", b1); + if (retry_on_status-- > 0) { + msleep(5); + goto more; + } else { + dev_err(&ftdi->udev->dev, "STATUS ERROR retry l" + "imit reached\n"); + return -EFAULT; + } + } else if (retval == -ETIMEDOUT) { + if (retry_on_timeout-- > 0) { + goto more; + } else { + dev_err(&ftdi->udev->dev, "TIMED OUT retry limi" + "t reached\n"); + return -ENOMEM; + } + } else if (retval == 0) { + if (retry_on_empty-- > 0) { + goto more; + } else { + dev_err(&ftdi->udev->dev, "empty packet retry l" + "imit reached\n"); + return -ENOMEM; + } + } else { + dev_err(&ftdi->udev->dev, "error = %d\n", retval); + return -ENOMEM; + } + } + return -1; +} + +static int ftdi_elan_checkingPCI(struct usb_ftdi *ftdi) +{ + int UxxxStatus = ftdi_elan_read_reg(ftdi, &ftdi->controlreg); + if (UxxxStatus) + return UxxxStatus; + if (ftdi->controlreg & 0x00400000) { + if (ftdi->card_ejected) { + } else { + ftdi->card_ejected = 1; + dev_err(&ftdi->udev->dev, "CARD EJECTED - controlreg = " + "%08X\n", ftdi->controlreg); + } + return -ENODEV; + } else { + u8 fn = ftdi->function - 1; + int activePCIfn = fn << 8; + u32 pcidata; + u32 pciVID; + u32 pciPID; + int reg = 0; + UxxxStatus = ftdi_elan_read_config(ftdi, activePCIfn | reg, 0, + &pcidata); + if (UxxxStatus) + return UxxxStatus; + pciVID = pcidata & 0xFFFF; + pciPID = (pcidata >> 16) & 0xFFFF; + if (pciVID == ftdi->platform_data.vendor && pciPID == + ftdi->platform_data.device) { + return 0; + } else { + dev_err(&ftdi->udev->dev, "vendor=%04X pciVID=%04X devi" + "ce=%04X pciPID=%04X\n", + ftdi->platform_data.vendor, pciVID, + ftdi->platform_data.device, pciPID); + return -ENODEV; + } + } +} + +static int ftdi_elan_enumeratePCI(struct usb_ftdi *ftdi) +{ + u32 latence_timer; + u32 controlreg; + int UxxxStatus; + u32 pcidata; + int reg = 0; + int foundOHCI = 0; + u8 fn; + int activePCIfn = 0; + u32 pciVID = 0; + u32 pciPID = 0; + UxxxStatus = ftdi_elan_read_reg(ftdi, &controlreg); + if (UxxxStatus) + return UxxxStatus; + UxxxStatus = ftdi_elan_write_reg(ftdi, 0x00000000L); + if (UxxxStatus) + return UxxxStatus; + msleep(750); + UxxxStatus = ftdi_elan_write_reg(ftdi, 0x00000200L | 0x100); + if (UxxxStatus) + return UxxxStatus; + UxxxStatus = ftdi_elan_write_reg(ftdi, 0x00000200L | 0x500); + if (UxxxStatus) + return UxxxStatus; + UxxxStatus = ftdi_elan_read_reg(ftdi, &controlreg); + if (UxxxStatus) + return UxxxStatus; + UxxxStatus = ftdi_elan_write_reg(ftdi, 0x0000020CL | 0x000); + if (UxxxStatus) + return UxxxStatus; + UxxxStatus = ftdi_elan_write_reg(ftdi, 0x0000020DL | 0x000); + if (UxxxStatus) + return UxxxStatus; + msleep(250); + UxxxStatus = ftdi_elan_write_reg(ftdi, 0x0000020FL | 0x000); + if (UxxxStatus) + return UxxxStatus; + UxxxStatus = ftdi_elan_read_reg(ftdi, &controlreg); + if (UxxxStatus) + return UxxxStatus; + UxxxStatus = ftdi_elan_write_reg(ftdi, 0x0000025FL | 0x800); + if (UxxxStatus) + return UxxxStatus; + UxxxStatus = ftdi_elan_read_reg(ftdi, &controlreg); + if (UxxxStatus) + return UxxxStatus; + UxxxStatus = ftdi_elan_read_reg(ftdi, &controlreg); + if (UxxxStatus) + return UxxxStatus; + msleep(1000); + for (fn = 0; (fn < 4) && (!foundOHCI); fn++) { + activePCIfn = fn << 8; + ftdi->function = fn + 1; + UxxxStatus = ftdi_elan_read_config(ftdi, activePCIfn | reg, 0, + &pcidata); + if (UxxxStatus) + return UxxxStatus; + pciVID = pcidata & 0xFFFF; + pciPID = (pcidata >> 16) & 0xFFFF; + if ((pciVID == 0x1045) && (pciPID == 0xc861)) { + foundOHCI = 1; + } else if ((pciVID == 0x1033) && (pciPID == 0x0035)) { + foundOHCI = 1; + } else if ((pciVID == 0x10b9) && (pciPID == 0x5237)) { + foundOHCI = 1; + } else if ((pciVID == 0x11c1) && (pciPID == 0x5802)) { + foundOHCI = 1; + } else if ((pciVID == 0x11AB) && (pciPID == 0x1FA6)) { + } + } + if (foundOHCI == 0) { + return -ENXIO; + } + ftdi->platform_data.vendor = pciVID; + ftdi->platform_data.device = pciPID; + UxxxStatus = ftdi_elan_write_reg(ftdi, 0x0000025FL | 0x2800); + if (UxxxStatus) + return UxxxStatus; + reg = 16; + UxxxStatus = ftdi_elan_write_config(ftdi, activePCIfn | reg, 0, + 0xFFFFFFFF); + if (UxxxStatus) + return UxxxStatus; + UxxxStatus = ftdi_elan_read_config(ftdi, activePCIfn | reg, 0, + &pcidata); + if (UxxxStatus) + return UxxxStatus; + UxxxStatus = ftdi_elan_write_config(ftdi, activePCIfn | reg, 0, + 0xF0000000); + if (UxxxStatus) + return UxxxStatus; + UxxxStatus = ftdi_elan_read_config(ftdi, activePCIfn | reg, 0, + &pcidata); + if (UxxxStatus) + return UxxxStatus; + reg = 12; + UxxxStatus = ftdi_elan_read_config(ftdi, activePCIfn | reg, 0, + &latence_timer); + if (UxxxStatus) + return UxxxStatus; + latence_timer &= 0xFFFF00FF; + latence_timer |= 0x00001600; + UxxxStatus = ftdi_elan_write_config(ftdi, activePCIfn | reg, 0x00, + latence_timer); + if (UxxxStatus) + return UxxxStatus; + UxxxStatus = ftdi_elan_read_config(ftdi, activePCIfn | reg, 0, + &pcidata); + if (UxxxStatus) + return UxxxStatus; + reg = 4; + UxxxStatus = ftdi_elan_write_config(ftdi, activePCIfn | reg, 0x00, + 0x06); + if (UxxxStatus) + return UxxxStatus; + UxxxStatus = ftdi_elan_read_config(ftdi, activePCIfn | reg, 0, + &pcidata); + if (UxxxStatus) + return UxxxStatus; + return 0; +} + +static int ftdi_elan_setupOHCI(struct usb_ftdi *ftdi) +{ + u32 pcidata; + int U132Status; + int reg; + int reset_repeat = 0; + do_reset:reg = 8; + U132Status = ftdi_elan_write_pcimem(ftdi, reg, 0x0e, 0x01); + if (U132Status) + return U132Status; + reset_check:{ + U132Status = ftdi_elan_read_pcimem(ftdi, reg, 0, &pcidata); + if (U132Status) + return U132Status; + if (pcidata & 1) { + msleep(500); + if (reset_repeat++ > 100) { + reset_repeat = 0; + goto do_reset; + } else + goto reset_check; + } + } + goto dump_regs; + msleep(500); + reg = 0x28; + U132Status = ftdi_elan_write_pcimem(ftdi, reg, 0x00, 0x11000000); + if (U132Status) + return U132Status; + U132Status = ftdi_elan_read_pcimem(ftdi, reg, 0, &pcidata); + if (U132Status) + return U132Status; + reg = 0x40; + U132Status = ftdi_elan_write_pcimem(ftdi, reg, 0x00, 0x2edf); + if (U132Status) + return U132Status; + U132Status = ftdi_elan_read_pcimem(ftdi, reg, 0, &pcidata); + if (U132Status) + return U132Status; + reg = 0x34; + U132Status = ftdi_elan_write_pcimem(ftdi, reg, 0x00, 0x2edf2edf); + if (U132Status) + return U132Status; + U132Status = ftdi_elan_read_pcimem(ftdi, reg, 0, &pcidata); + if (U132Status) + return U132Status; + reg = 4; + U132Status = ftdi_elan_write_pcimem(ftdi, reg, 0x00, 0xA0); + if (U132Status) + return U132Status; + U132Status = ftdi_elan_read_pcimem(ftdi, reg, 0, &pcidata); + if (U132Status) + return U132Status; + msleep(250); + reg = 8; + U132Status = ftdi_elan_write_pcimem(ftdi, reg, 0x0e, 0x04); + if (U132Status) + return U132Status; + U132Status = ftdi_elan_read_pcimem(ftdi, reg, 0, &pcidata); + if (U132Status) + return U132Status; + reg = 0x28; + U132Status = ftdi_elan_read_pcimem(ftdi, reg, 0, &pcidata); + if (U132Status) + return U132Status; + reg = 8; + U132Status = ftdi_elan_read_pcimem(ftdi, reg, 0, &pcidata); + if (U132Status) + return U132Status; + reg = 0x48; + U132Status = ftdi_elan_write_pcimem(ftdi, reg, 0x00, 0x00001200); + if (U132Status) + return U132Status; + U132Status = ftdi_elan_read_pcimem(ftdi, reg, 0, &pcidata); + if (U132Status) + return U132Status; + reg = 0x54; + U132Status = ftdi_elan_read_pcimem(ftdi, reg, 0, &pcidata); + if (U132Status) + return U132Status; + reg = 0x58; + U132Status = ftdi_elan_read_pcimem(ftdi, reg, 0, &pcidata); + if (U132Status) + return U132Status; + reg = 0x34; + U132Status = ftdi_elan_write_pcimem(ftdi, reg, 0x00, 0x28002edf); + if (U132Status) + return U132Status; + U132Status = ftdi_elan_read_pcimem(ftdi, reg, 0, &pcidata); + if (U132Status) + return U132Status; + msleep(100); + reg = 0x50; + U132Status = ftdi_elan_write_pcimem(ftdi, reg, 0x00, 0x10000); + if (U132Status) + return U132Status; + reg = 0x54; + power_check:U132Status = ftdi_elan_read_pcimem(ftdi, reg, 0, &pcidata); + if (U132Status) + return U132Status; + if (!(pcidata & 1)) { + msleep(500); + goto power_check; + } + msleep(3000); + reg = 0x54; + U132Status = ftdi_elan_read_pcimem(ftdi, reg, 0, &pcidata); + if (U132Status) + return U132Status; + reg = 0x58; + U132Status = ftdi_elan_read_pcimem(ftdi, reg, 0, &pcidata); + if (U132Status) + return U132Status; + reg = 0x54; + U132Status = ftdi_elan_write_pcimem(ftdi, reg, 0x00, 0x02); + if (U132Status) + return U132Status; + U132Status = ftdi_elan_read_pcimem(ftdi, reg, 0, &pcidata); + if (U132Status) + return U132Status; + reg = 0x54; + U132Status = ftdi_elan_write_pcimem(ftdi, reg, 0x00, 0x10); + if (U132Status) + return U132Status; + U132Status = ftdi_elan_read_pcimem(ftdi, reg, 0, &pcidata); + if (U132Status) + return U132Status; + msleep(750); + reg = 0x54; + if (0) { + U132Status = ftdi_elan_write_pcimem(ftdi, reg, 0x00, 0x02); + if (U132Status) + return U132Status; + } + if (0) { + U132Status = ftdi_elan_read_pcimem(ftdi, reg, 0, &pcidata); + if (U132Status) + return U132Status; + } + reg = 0x54; + U132Status = ftdi_elan_read_pcimem(ftdi, reg, 0, &pcidata); + if (U132Status) + return U132Status; + reg = 0x58; + U132Status = ftdi_elan_read_pcimem(ftdi, reg, 0, &pcidata); + if (U132Status) + return U132Status; + dump_regs:for (reg = 0; reg <= 0x54; reg += 4) { + U132Status = ftdi_elan_read_pcimem(ftdi, reg, 0, &pcidata); + if (U132Status) + return U132Status; + } + return 0; +} + + +/* +* we use only the first bulk-in and bulk-out endpoints +*/ +static int ftdi_elan_probe(struct usb_interface *interface, + const struct usb_device_id *id) +{ + struct usb_host_interface *iface_desc; + struct usb_endpoint_descriptor *endpoint; + size_t buffer_size; + int i; + int retval = -ENOMEM; + struct usb_ftdi *ftdi = kmalloc(sizeof(struct usb_ftdi), GFP_KERNEL); + if (ftdi == NULL) { + printk(KERN_ERR "Out of memory\n"); + return -ENOMEM; + } + memset(ftdi, 0x00, sizeof(struct usb_ftdi)); + down(&ftdi_module_lock); + list_add_tail(&ftdi->ftdi_list, &ftdi_static_list); + ftdi->sequence_num = ++ftdi_instances; + up(&ftdi_module_lock); + ftdi_elan_init_kref(ftdi); + init_MUTEX(&ftdi->sw_lock); + ftdi->udev = usb_get_dev(interface_to_usbdev(interface)); + ftdi->interface = interface; + init_MUTEX(&ftdi->u132_lock); + ftdi->expected = 4; + iface_desc = interface->cur_altsetting; + for (i = 0; i < iface_desc->desc.bNumEndpoints; ++i) { + endpoint = &iface_desc->endpoint[i].desc; + if (!ftdi->bulk_in_endpointAddr && + ((endpoint->bEndpointAddress & USB_ENDPOINT_DIR_MASK) + == USB_DIR_IN) && ((endpoint->bmAttributes & + USB_ENDPOINT_XFERTYPE_MASK) == USB_ENDPOINT_XFER_BULK)) + { + buffer_size = le16_to_cpu(endpoint->wMaxPacketSize); + ftdi->bulk_in_size = buffer_size; + ftdi->bulk_in_endpointAddr = endpoint->bEndpointAddress; + ftdi->bulk_in_buffer = kmalloc(buffer_size, GFP_KERNEL); + if (!ftdi->bulk_in_buffer) { + dev_err(&ftdi->udev->dev, "Could not allocate b" + "ulk_in_buffer\n"); + retval = -ENOMEM; + goto error; + } + } + if (!ftdi->bulk_out_endpointAddr && + ((endpoint->bEndpointAddress & USB_ENDPOINT_DIR_MASK) + == USB_DIR_OUT) && ((endpoint->bmAttributes & + USB_ENDPOINT_XFERTYPE_MASK) == USB_ENDPOINT_XFER_BULK)) + { + ftdi->bulk_out_endpointAddr = + endpoint->bEndpointAddress; + } + } + if (!(ftdi->bulk_in_endpointAddr && ftdi->bulk_out_endpointAddr)) { + dev_err(&ftdi->udev->dev, "Could not find both bulk-in and bulk" + "-out endpoints\n"); + retval = -ENODEV; + goto error; + } + dev_info(&ftdi->udev->dev, "interface %d has I=%02X O=%02X\n", + iface_desc->desc.bInterfaceNumber, ftdi->bulk_in_endpointAddr, + ftdi->bulk_out_endpointAddr); + usb_set_intfdata(interface, ftdi); + if (iface_desc->desc.bInterfaceNumber == 0 && + ftdi->bulk_in_endpointAddr == 0x81 && + ftdi->bulk_out_endpointAddr == 0x02) { + retval = usb_register_dev(interface, &ftdi_elan_jtag_class); + if (retval) { + dev_err(&ftdi->udev->dev, "Not able to get a minor for " + "this device.\n"); + usb_set_intfdata(interface, NULL); + retval = -ENOMEM; + goto error; + } else { + ftdi->class = &ftdi_elan_jtag_class; + dev_info(&ftdi->udev->dev, "USB FDTI=%p JTAG interface " + "%d now attached to ftdi%d\n", ftdi, + iface_desc->desc.bInterfaceNumber, + interface->minor); + return 0; + } + } else if (iface_desc->desc.bInterfaceNumber == 1 && + ftdi->bulk_in_endpointAddr == 0x83 && + ftdi->bulk_out_endpointAddr == 0x04) { + ftdi->class = NULL; + dev_info(&ftdi->udev->dev, "USB FDTI=%p ELAN interface %d now a" + "ctivated\n", ftdi, iface_desc->desc.bInterfaceNumber); + INIT_WORK(&ftdi->status_work, ftdi_elan_status_work, + (void *)ftdi); + INIT_WORK(&ftdi->command_work, ftdi_elan_command_work, + (void *)ftdi); + INIT_WORK(&ftdi->respond_work, ftdi_elan_respond_work, + (void *)ftdi); + ftdi_status_queue_work(ftdi, msecs_to_jiffies(3 *1000)); + return 0; + } else { + dev_err(&ftdi->udev->dev, + "Could not find ELAN's U132 device\n"); + retval = -ENODEV; + goto error; + } + error:if (ftdi) { + ftdi_elan_put_kref(ftdi); + } + return retval; +} + +static void ftdi_elan_disconnect(struct usb_interface *interface) +{ + struct usb_ftdi *ftdi = usb_get_intfdata(interface); + ftdi->disconnected += 1; + if (ftdi->class) { + int minor = interface->minor; + struct usb_class_driver *class = ftdi->class; + usb_set_intfdata(interface, NULL); + usb_deregister_dev(interface, class); + dev_info(&ftdi->udev->dev, "USB FTDI U132 jtag interface on min" + "or %d now disconnected\n", minor); + } else { + ftdi_status_cancel_work(ftdi); + ftdi_command_cancel_work(ftdi); + ftdi_response_cancel_work(ftdi); + ftdi_elan_abandon_completions(ftdi); + ftdi_elan_abandon_targets(ftdi); + if (ftdi->registered) { + platform_device_unregister(&ftdi->platform_dev); + ftdi->synchronized = 0; + ftdi->enumerated = 0; + ftdi->registered = 0; + } + flush_workqueue(status_queue); + flush_workqueue(command_queue); + flush_workqueue(respond_queue); + ftdi->disconnected += 1; + usb_set_intfdata(interface, NULL); + dev_info(&ftdi->udev->dev, "USB FTDI U132 host controller inter" + "face now disconnected\n"); + } + ftdi_elan_put_kref(ftdi); +} + +static struct usb_driver ftdi_elan_driver = { + .name = "ftdi-elan", + .probe = ftdi_elan_probe, + .disconnect = ftdi_elan_disconnect, + .id_table = ftdi_elan_table, +}; +static int __init ftdi_elan_init(void) +{ + int result; + printk(KERN_INFO "driver %s built at %s on %s\n", ftdi_elan_driver.name, + __TIME__, __DATE__); + init_MUTEX(&ftdi_module_lock); + INIT_LIST_HEAD(&ftdi_static_list); + status_queue = create_singlethread_workqueue("ftdi-status-control"); + command_queue = create_singlethread_workqueue("ftdi-command-engine"); + respond_queue = create_singlethread_workqueue("ftdi-respond-engine"); + result = usb_register(&ftdi_elan_driver); + if (result) + printk(KERN_ERR "usb_register failed. Error number %d\n", + result); + return result; +} + +static void __exit ftdi_elan_exit(void) +{ + struct usb_ftdi *ftdi; + struct usb_ftdi *temp; + usb_deregister(&ftdi_elan_driver); + printk(KERN_INFO "ftdi_u132 driver deregistered\n"); + list_for_each_entry_safe(ftdi, temp, &ftdi_static_list, ftdi_list) { + ftdi_status_cancel_work(ftdi); + ftdi_command_cancel_work(ftdi); + ftdi_response_cancel_work(ftdi); + } flush_workqueue(status_queue); + destroy_workqueue(status_queue); + status_queue = NULL; + flush_workqueue(command_queue); + destroy_workqueue(command_queue); + command_queue = NULL; + flush_workqueue(respond_queue); + destroy_workqueue(respond_queue); + respond_queue = NULL; +} + + +module_init(ftdi_elan_init); +module_exit(ftdi_elan_exit); diff --git a/drivers/usb/misc/idmouse.c b/drivers/usb/misc/idmouse.c index fcd69c52aea..8e6e195a22b 100644 --- a/drivers/usb/misc/idmouse.c +++ b/drivers/usb/misc/idmouse.c @@ -98,7 +98,7 @@ static int idmouse_probe(struct usb_interface *interface, static void idmouse_disconnect(struct usb_interface *interface); /* file operation pointers */ -static struct file_operations idmouse_fops = { +static const struct file_operations idmouse_fops = { .owner = THIS_MODULE, .read = idmouse_read, .open = idmouse_open, diff --git a/drivers/usb/misc/ldusb.c b/drivers/usb/misc/ldusb.c index f30ab1fbb3c..10b640339d8 100644 --- a/drivers/usb/misc/ldusb.c +++ b/drivers/usb/misc/ldusb.c @@ -589,7 +589,7 @@ exit: } /* file operations needed when we register this driver */ -static struct file_operations ld_usb_fops = { +static const struct file_operations ld_usb_fops = { .owner = THIS_MODULE, .read = ld_usb_read, .write = ld_usb_write, @@ -657,15 +657,11 @@ static int ld_usb_probe(struct usb_interface *intf, const struct usb_device_id * for (i = 0; i < iface_desc->desc.bNumEndpoints; ++i) { endpoint = &iface_desc->endpoint[i].desc; - if (((endpoint->bEndpointAddress & USB_ENDPOINT_DIR_MASK) == USB_DIR_IN) && - ((endpoint->bmAttributes & USB_ENDPOINT_XFERTYPE_MASK) == USB_ENDPOINT_XFER_INT)) { + if (usb_endpoint_is_int_in(endpoint)) dev->interrupt_in_endpoint = endpoint; - } - if (((endpoint->bEndpointAddress & USB_ENDPOINT_DIR_MASK) == USB_DIR_OUT) && - ((endpoint->bmAttributes & USB_ENDPOINT_XFERTYPE_MASK) == USB_ENDPOINT_XFER_INT)) { + if (usb_endpoint_is_int_out(endpoint)) dev->interrupt_out_endpoint = endpoint; - } } if (dev->interrupt_in_endpoint == NULL) { dev_err(&intf->dev, "Interrupt in endpoint not found\n"); diff --git a/drivers/usb/misc/legousbtower.c b/drivers/usb/misc/legousbtower.c index 7699d970e68..77c36e63c7b 100644 --- a/drivers/usb/misc/legousbtower.c +++ b/drivers/usb/misc/legousbtower.c @@ -259,7 +259,7 @@ static void tower_disconnect (struct usb_interface *interface); static DEFINE_MUTEX (disconnect_mutex); /* file operations needed when we register this driver */ -static struct file_operations tower_fops = { +static const struct file_operations tower_fops = { .owner = THIS_MODULE, .read = tower_read, .write = tower_write, diff --git a/drivers/usb/misc/phidget.c b/drivers/usb/misc/phidget.c new file mode 100644 index 00000000000..735ed33f4f7 --- /dev/null +++ b/drivers/usb/misc/phidget.c @@ -0,0 +1,43 @@ +/* + * USB Phidgets class + * + * Copyright (C) 2006 Sean Young <sean@mess.org> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + */ + +#include <linux/kernel.h> +#include <linux/module.h> +#include <linux/init.h> +#include <linux/err.h> +#include <linux/device.h> + +struct class *phidget_class; + +static int __init init_phidget(void) +{ + phidget_class = class_create(THIS_MODULE, "phidget"); + + if (IS_ERR(phidget_class)) + return PTR_ERR(phidget_class); + + return 0; +} + +static void __exit cleanup_phidget(void) +{ + class_destroy(phidget_class); +} + +EXPORT_SYMBOL_GPL(phidget_class); + +module_init(init_phidget); +module_exit(cleanup_phidget); + +MODULE_LICENSE("GPL"); +MODULE_AUTHOR("Sean Young <sean@mess.org>"); +MODULE_DESCRIPTION("Container module for phidget class"); + diff --git a/drivers/usb/misc/phidget.h b/drivers/usb/misc/phidget.h new file mode 100644 index 00000000000..c4011907d43 --- /dev/null +++ b/drivers/usb/misc/phidget.h @@ -0,0 +1,12 @@ +/* + * USB Phidgets class + * + * Copyright (C) 2006 Sean Young <sean@mess.org> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + */ + +extern struct class *phidget_class; diff --git a/drivers/usb/misc/phidgetkit.c b/drivers/usb/misc/phidgetkit.c index bfbbbfbb92b..9a8d137d39f 100644 --- a/drivers/usb/misc/phidgetkit.c +++ b/drivers/usb/misc/phidgetkit.c @@ -20,6 +20,8 @@ #include <linux/module.h> #include <linux/usb.h> +#include "phidget.h" + #define DRIVER_AUTHOR "Sean Young <sean@mess.org>" #define DRIVER_DESC "USB PhidgetInterfaceKit Driver" @@ -57,11 +59,15 @@ ifkit(8, 8, 4, 0); ifkit(0, 8, 8, 1); ifkit(0, 16, 16, 0); +static unsigned long device_no; + struct interfacekit { struct usb_device *udev; struct usb_interface *intf; struct driver_interfacekit *ifkit; + struct device *dev; unsigned long outputs; + int dev_no; u8 inputs[MAX_INTERFACES]; u16 sensors[MAX_INTERFACES]; u8 lcd_files_on; @@ -180,21 +186,24 @@ exit: } #define set_lcd_line(number) \ -static ssize_t lcd_line_##number(struct device *dev, struct device_attribute *attr, const char *buf, size_t count) \ -{ \ - struct usb_interface *intf = to_usb_interface(dev); \ - struct interfacekit *kit = usb_get_intfdata(intf); \ - change_string(kit, buf, number - 1); \ - return count; \ -} \ -static DEVICE_ATTR(lcd_line_##number, S_IWUGO, NULL, lcd_line_##number); +static ssize_t lcd_line_##number(struct device *dev, \ + struct device_attribute *attr, \ + const char *buf, size_t count) \ +{ \ + struct interfacekit *kit = dev_get_drvdata(dev); \ + change_string(kit, buf, number - 1); \ + return count; \ +} + +#define lcd_line_attr(number) \ + __ATTR(lcd_line_##number, S_IWUGO, NULL, lcd_line_##number) + set_lcd_line(1); set_lcd_line(2); static ssize_t set_backlight(struct device *dev, struct device_attribute *attr, const char *buf, size_t count) { - struct usb_interface *intf = to_usb_interface(dev); - struct interfacekit *kit = usb_get_intfdata(intf); + struct interfacekit *kit = dev_get_drvdata(dev); int enabled; unsigned char *buffer; int retval = -ENOMEM; @@ -226,23 +235,30 @@ exit: kfree(buffer); return retval; } -static DEVICE_ATTR(backlight, S_IWUGO, NULL, set_backlight); + +static struct device_attribute dev_lcd_line_attrs[] = { + lcd_line_attr(1), + lcd_line_attr(2), + __ATTR(backlight, S_IWUGO, NULL, set_backlight) +}; static void remove_lcd_files(struct interfacekit *kit) { + int i; + if (kit->lcd_files_on) { dev_dbg(&kit->udev->dev, "Removing lcd files\n"); - device_remove_file(&kit->intf->dev, &dev_attr_lcd_line_1); - device_remove_file(&kit->intf->dev, &dev_attr_lcd_line_2); - device_remove_file(&kit->intf->dev, &dev_attr_backlight); + + for (i=0; i<ARRAY_SIZE(dev_lcd_line_attrs); i++) + device_remove_file(kit->dev, &dev_lcd_line_attrs[i]); } } static ssize_t enable_lcd_files(struct device *dev, struct device_attribute *attr, const char *buf, size_t count) { - struct usb_interface *intf = to_usb_interface(dev); - struct interfacekit *kit = usb_get_intfdata(intf); + struct interfacekit *kit = dev_get_drvdata(dev); int enable; + int i, rc; if (kit->ifkit->has_lcd == 0) return -ENODEV; @@ -253,9 +269,12 @@ static ssize_t enable_lcd_files(struct device *dev, struct device_attribute *att if (enable) { if (!kit->lcd_files_on) { dev_dbg(&kit->udev->dev, "Adding lcd files\n"); - device_create_file(&kit->intf->dev, &dev_attr_lcd_line_1); - device_create_file(&kit->intf->dev, &dev_attr_lcd_line_2); - device_create_file(&kit->intf->dev, &dev_attr_backlight); + for (i=0; i<ARRAY_SIZE(dev_lcd_line_attrs); i++) { + rc = device_create_file(kit->dev, + &dev_lcd_line_attrs[i]); + if (rc) + goto out; + } kit->lcd_files_on = 1; } } else { @@ -266,7 +285,13 @@ static ssize_t enable_lcd_files(struct device *dev, struct device_attribute *att } return count; +out: + while (i-- > 0) + device_remove_file(kit->dev, &dev_lcd_line_attrs[i]); + + return rc; } + static DEVICE_ATTR(lcd, S_IWUGO, NULL, enable_lcd_files); static void interfacekit_irq(struct urb *urb, struct pt_regs *regs) @@ -362,24 +387,24 @@ static void do_notify(void *data) for (i=0; i<kit->ifkit->inputs; i++) { if (test_and_clear_bit(i, &kit->input_events)) { sprintf(sysfs_file, "input%d", i + 1); - sysfs_notify(&kit->intf->dev.kobj, NULL, sysfs_file); + sysfs_notify(&kit->dev->kobj, NULL, sysfs_file); } } for (i=0; i<kit->ifkit->sensors; i++) { if (test_and_clear_bit(i, &kit->sensor_events)) { sprintf(sysfs_file, "sensor%d", i + 1); - sysfs_notify(&kit->intf->dev.kobj, NULL, sysfs_file); + sysfs_notify(&kit->dev->kobj, NULL, sysfs_file); } } } #define show_set_output(value) \ -static ssize_t set_output##value(struct device *dev, struct device_attribute *attr, const char *buf, \ - size_t count) \ +static ssize_t set_output##value(struct device *dev, \ + struct device_attribute *attr, \ + const char *buf, size_t count) \ { \ - struct usb_interface *intf = to_usb_interface(dev); \ - struct interfacekit *kit = usb_get_intfdata(intf); \ + struct interfacekit *kit = dev_get_drvdata(dev); \ int enabled; \ int retval; \ \ @@ -391,15 +416,19 @@ static ssize_t set_output##value(struct device *dev, struct device_attribute *at return retval ? retval : count; \ } \ \ -static ssize_t show_output##value(struct device *dev, struct device_attribute *attr, char *buf) \ +static ssize_t show_output##value(struct device *dev, \ + struct device_attribute *attr, \ + char *buf) \ { \ - struct usb_interface *intf = to_usb_interface(dev); \ - struct interfacekit *kit = usb_get_intfdata(intf); \ + struct interfacekit *kit = dev_get_drvdata(dev); \ \ return sprintf(buf, "%d\n", !!test_bit(value - 1, &kit->outputs));\ -} \ -static DEVICE_ATTR(output##value, S_IWUGO | S_IRUGO, \ - show_output##value, set_output##value); +} + +#define output_attr(value) \ + __ATTR(output##value, S_IWUGO | S_IRUGO, \ + show_output##value, set_output##value) + show_set_output(1); show_set_output(2); show_set_output(3); @@ -417,15 +446,24 @@ show_set_output(14); show_set_output(15); show_set_output(16); +static struct device_attribute dev_output_attrs[] = { + output_attr(1), output_attr(2), output_attr(3), output_attr(4), + output_attr(5), output_attr(6), output_attr(7), output_attr(8), + output_attr(9), output_attr(10), output_attr(11), output_attr(12), + output_attr(13), output_attr(14), output_attr(15), output_attr(16) +}; + #define show_input(value) \ -static ssize_t show_input##value(struct device *dev, struct device_attribute *attr, char *buf) \ +static ssize_t show_input##value(struct device *dev, \ + struct device_attribute *attr, char *buf) \ { \ - struct usb_interface *intf = to_usb_interface(dev); \ - struct interfacekit *kit = usb_get_intfdata(intf); \ + struct interfacekit *kit = dev_get_drvdata(dev); \ \ return sprintf(buf, "%d\n", (int)kit->inputs[value - 1]); \ -} \ -static DEVICE_ATTR(input##value, S_IRUGO, show_input##value, NULL); +} + +#define input_attr(value) \ + __ATTR(input##value, S_IRUGO, show_input##value, NULL) show_input(1); show_input(2); @@ -444,15 +482,25 @@ show_input(14); show_input(15); show_input(16); +static struct device_attribute dev_input_attrs[] = { + input_attr(1), input_attr(2), input_attr(3), input_attr(4), + input_attr(5), input_attr(6), input_attr(7), input_attr(8), + input_attr(9), input_attr(10), input_attr(11), input_attr(12), + input_attr(13), input_attr(14), input_attr(15), input_attr(16) +}; + #define show_sensor(value) \ -static ssize_t show_sensor##value(struct device *dev, struct device_attribute *attr, char *buf) \ +static ssize_t show_sensor##value(struct device *dev, \ + struct device_attribute *attr, \ + char *buf) \ { \ - struct usb_interface *intf = to_usb_interface(dev); \ - struct interfacekit *kit = usb_get_intfdata(intf); \ + struct interfacekit *kit = dev_get_drvdata(dev); \ \ return sprintf(buf, "%d\n", (int)kit->sensors[value - 1]); \ -} \ -static DEVICE_ATTR(sensor##value, S_IRUGO, show_sensor##value, NULL); +} + +#define sensor_attr(value) \ + __ATTR(sensor##value, S_IRUGO, show_sensor##value, NULL) show_sensor(1); show_sensor(2); @@ -463,6 +511,11 @@ show_sensor(6); show_sensor(7); show_sensor(8); +static struct device_attribute dev_sensor_attrs[] = { + sensor_attr(1), sensor_attr(2), sensor_attr(3), sensor_attr(4), + sensor_attr(5), sensor_attr(6), sensor_attr(7), sensor_attr(8) +}; + static int interfacekit_probe(struct usb_interface *intf, const struct usb_device_id *id) { struct usb_device *dev = interface_to_usbdev(intf); @@ -471,6 +524,7 @@ static int interfacekit_probe(struct usb_interface *intf, const struct usb_devic struct interfacekit *kit; struct driver_interfacekit *ifkit; int pipe, maxp, rc = -ENOMEM; + int bit, value, i; ifkit = (struct driver_interfacekit *)id->driver_info; if (!ifkit) @@ -493,6 +547,7 @@ static int interfacekit_probe(struct usb_interface *intf, const struct usb_devic if (!kit) goto out; + kit->dev_no = -1; kit->ifkit = ifkit; kit->data = usb_buffer_alloc(dev, URB_INT_SIZE, SLAB_ATOMIC, &kit->data_dma); if (!kit->data) @@ -513,85 +568,80 @@ static int interfacekit_probe(struct usb_interface *intf, const struct usb_devic usb_set_intfdata(intf, kit); + do { + bit = find_first_zero_bit(&device_no, sizeof(device_no)); + value = test_and_set_bit(bit, &device_no); + } while(value); + kit->dev_no = bit; + + kit->dev = device_create(phidget_class, &kit->udev->dev, 0, + "interfacekit%d", kit->dev_no); + if (IS_ERR(kit->dev)) { + rc = PTR_ERR(kit->dev); + kit->dev = NULL; + goto out; + } + dev_set_drvdata(kit->dev, kit); + if (usb_submit_urb(kit->irq, GFP_KERNEL)) { rc = -EIO; goto out; } - if (ifkit->outputs >= 4) { - device_create_file(&intf->dev, &dev_attr_output1); - device_create_file(&intf->dev, &dev_attr_output2); - device_create_file(&intf->dev, &dev_attr_output3); - device_create_file(&intf->dev, &dev_attr_output4); - } - if (ifkit->outputs >= 8) { - device_create_file(&intf->dev, &dev_attr_output5); - device_create_file(&intf->dev, &dev_attr_output6); - device_create_file(&intf->dev, &dev_attr_output7); - device_create_file(&intf->dev, &dev_attr_output8); - } - if (ifkit->outputs == 16) { - device_create_file(&intf->dev, &dev_attr_output9); - device_create_file(&intf->dev, &dev_attr_output10); - device_create_file(&intf->dev, &dev_attr_output11); - device_create_file(&intf->dev, &dev_attr_output12); - device_create_file(&intf->dev, &dev_attr_output13); - device_create_file(&intf->dev, &dev_attr_output14); - device_create_file(&intf->dev, &dev_attr_output15); - device_create_file(&intf->dev, &dev_attr_output16); + for (i=0; i<ifkit->outputs; i++ ) { + rc = device_create_file(kit->dev, &dev_output_attrs[i]); + if (rc) + goto out2; } - if (ifkit->inputs >= 4) { - device_create_file(&intf->dev, &dev_attr_input1); - device_create_file(&intf->dev, &dev_attr_input2); - device_create_file(&intf->dev, &dev_attr_input3); - device_create_file(&intf->dev, &dev_attr_input4); - } - if (ifkit->inputs >= 8) { - device_create_file(&intf->dev, &dev_attr_input5); - device_create_file(&intf->dev, &dev_attr_input6); - device_create_file(&intf->dev, &dev_attr_input7); - device_create_file(&intf->dev, &dev_attr_input8); - } - if (ifkit->inputs == 16) { - device_create_file(&intf->dev, &dev_attr_input9); - device_create_file(&intf->dev, &dev_attr_input10); - device_create_file(&intf->dev, &dev_attr_input11); - device_create_file(&intf->dev, &dev_attr_input12); - device_create_file(&intf->dev, &dev_attr_input13); - device_create_file(&intf->dev, &dev_attr_input14); - device_create_file(&intf->dev, &dev_attr_input15); - device_create_file(&intf->dev, &dev_attr_input16); + for (i=0; i<ifkit->inputs; i++ ) { + rc = device_create_file(kit->dev, &dev_input_attrs[i]); + if (rc) + goto out3; } - if (ifkit->sensors >= 4) { - device_create_file(&intf->dev, &dev_attr_sensor1); - device_create_file(&intf->dev, &dev_attr_sensor2); - device_create_file(&intf->dev, &dev_attr_sensor3); - device_create_file(&intf->dev, &dev_attr_sensor4); - } - if (ifkit->sensors >= 7) { - device_create_file(&intf->dev, &dev_attr_sensor5); - device_create_file(&intf->dev, &dev_attr_sensor6); - device_create_file(&intf->dev, &dev_attr_sensor7); + for (i=0; i<ifkit->sensors; i++ ) { + rc = device_create_file(kit->dev, &dev_sensor_attrs[i]); + if (rc) + goto out4; } - if (ifkit->sensors == 8) - device_create_file(&intf->dev, &dev_attr_sensor8); - if (ifkit->has_lcd) - device_create_file(&intf->dev, &dev_attr_lcd); + if (ifkit->has_lcd) { + rc = device_create_file(kit->dev, &dev_attr_lcd); + if (rc) + goto out4; + + } dev_info(&intf->dev, "USB PhidgetInterfaceKit %d/%d/%d attached\n", ifkit->sensors, ifkit->inputs, ifkit->outputs); return 0; +out4: + while (i-- > 0) + device_remove_file(kit->dev, &dev_sensor_attrs[i]); + + i = ifkit->inputs; +out3: + while (i-- > 0) + device_remove_file(kit->dev, &dev_input_attrs[i]); + + i = ifkit->outputs; +out2: + while (i-- > 0) + device_remove_file(kit->dev, &dev_output_attrs[i]); out: if (kit) { if (kit->irq) usb_free_urb(kit->irq); if (kit->data) usb_buffer_free(dev, URB_INT_SIZE, kit->data, kit->data_dma); + if (kit->dev) + device_unregister(kit->dev); + if (kit->dev_no >= 0) + clear_bit(kit->dev_no, &device_no); + kfree(kit); } @@ -601,6 +651,7 @@ out: static void interfacekit_disconnect(struct usb_interface *interface) { struct interfacekit *kit; + int i; kit = usb_get_intfdata(interface); usb_set_intfdata(interface, NULL); @@ -613,73 +664,28 @@ static void interfacekit_disconnect(struct usb_interface *interface) cancel_delayed_work(&kit->do_notify); - if (kit->ifkit->outputs >= 4) { - device_remove_file(&interface->dev, &dev_attr_output1); - device_remove_file(&interface->dev, &dev_attr_output2); - device_remove_file(&interface->dev, &dev_attr_output3); - device_remove_file(&interface->dev, &dev_attr_output4); - } - if (kit->ifkit->outputs >= 8) { - device_remove_file(&interface->dev, &dev_attr_output5); - device_remove_file(&interface->dev, &dev_attr_output6); - device_remove_file(&interface->dev, &dev_attr_output7); - device_remove_file(&interface->dev, &dev_attr_output8); - } - if (kit->ifkit->outputs == 16) { - device_remove_file(&interface->dev, &dev_attr_output9); - device_remove_file(&interface->dev, &dev_attr_output10); - device_remove_file(&interface->dev, &dev_attr_output11); - device_remove_file(&interface->dev, &dev_attr_output12); - device_remove_file(&interface->dev, &dev_attr_output13); - device_remove_file(&interface->dev, &dev_attr_output14); - device_remove_file(&interface->dev, &dev_attr_output15); - device_remove_file(&interface->dev, &dev_attr_output16); - } + for (i=0; i<kit->ifkit->outputs; i++) + device_remove_file(kit->dev, &dev_output_attrs[i]); - if (kit->ifkit->inputs >= 4) { - device_remove_file(&interface->dev, &dev_attr_input1); - device_remove_file(&interface->dev, &dev_attr_input2); - device_remove_file(&interface->dev, &dev_attr_input3); - device_remove_file(&interface->dev, &dev_attr_input4); - } - if (kit->ifkit->inputs >= 8) { - device_remove_file(&interface->dev, &dev_attr_input5); - device_remove_file(&interface->dev, &dev_attr_input6); - device_remove_file(&interface->dev, &dev_attr_input7); - device_remove_file(&interface->dev, &dev_attr_input8); - } - if (kit->ifkit->inputs == 16) { - device_remove_file(&interface->dev, &dev_attr_input9); - device_remove_file(&interface->dev, &dev_attr_input10); - device_remove_file(&interface->dev, &dev_attr_input11); - device_remove_file(&interface->dev, &dev_attr_input12); - device_remove_file(&interface->dev, &dev_attr_input13); - device_remove_file(&interface->dev, &dev_attr_input14); - device_remove_file(&interface->dev, &dev_attr_input15); - device_remove_file(&interface->dev, &dev_attr_input16); - } + for (i=0; i<kit->ifkit->inputs; i++) + device_remove_file(kit->dev, &dev_input_attrs[i]); - if (kit->ifkit->sensors >= 4) { - device_remove_file(&interface->dev, &dev_attr_sensor1); - device_remove_file(&interface->dev, &dev_attr_sensor2); - device_remove_file(&interface->dev, &dev_attr_sensor3); - device_remove_file(&interface->dev, &dev_attr_sensor4); - } - if (kit->ifkit->sensors >= 7) { - device_remove_file(&interface->dev, &dev_attr_sensor5); - device_remove_file(&interface->dev, &dev_attr_sensor6); - device_remove_file(&interface->dev, &dev_attr_sensor7); + for (i=0; i<kit->ifkit->sensors; i++) + device_remove_file(kit->dev, &dev_sensor_attrs[i]); + + if (kit->ifkit->has_lcd) { + device_remove_file(kit->dev, &dev_attr_lcd); + remove_lcd_files(kit); } - if (kit->ifkit->sensors == 8) - device_remove_file(&interface->dev, &dev_attr_sensor8); - if (kit->ifkit->has_lcd) - device_remove_file(&interface->dev, &dev_attr_lcd); + device_unregister(kit->dev); dev_info(&interface->dev, "USB PhidgetInterfaceKit %d/%d/%d detached\n", kit->ifkit->sensors, kit->ifkit->inputs, kit->ifkit->outputs); usb_put_dev(kit->udev); + clear_bit(kit->dev_no, &device_no); + kfree(kit); } diff --git a/drivers/usb/misc/phidgetmotorcontrol.c b/drivers/usb/misc/phidgetmotorcontrol.c new file mode 100644 index 00000000000..6b59b620d61 --- /dev/null +++ b/drivers/usb/misc/phidgetmotorcontrol.c @@ -0,0 +1,466 @@ +/* + * USB Phidget MotorControl driver + * + * Copyright (C) 2006 Sean Young <sean@mess.org> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + */ + +#include <linux/kernel.h> +#include <linux/errno.h> +#include <linux/init.h> +#include <linux/module.h> +#include <linux/usb.h> + +#include "phidget.h" + +#define DRIVER_AUTHOR "Sean Young <sean@mess.org>" +#define DRIVER_DESC "USB PhidgetMotorControl Driver" + +#define USB_VENDOR_ID_GLAB 0x06c2 +#define USB_DEVICE_ID_MOTORCONTROL 0x0058 + +#define URB_INT_SIZE 8 + +static unsigned long device_no; + +struct motorcontrol { + struct usb_device *udev; + struct usb_interface *intf; + struct device *dev; + int dev_no; + u8 inputs[4]; + s8 desired_speed[2]; + s8 speed[2]; + s16 _current[2]; + s8 acceleration[2]; + struct urb *irq; + unsigned char *data; + dma_addr_t data_dma; + + struct work_struct do_notify; + unsigned long input_events; + unsigned long speed_events; + unsigned long exceed_events; +}; + +static struct usb_device_id id_table[] = { + { USB_DEVICE(USB_VENDOR_ID_GLAB, USB_DEVICE_ID_MOTORCONTROL) }, + {} +}; +MODULE_DEVICE_TABLE(usb, id_table); + +static int set_motor(struct motorcontrol *mc, int motor) +{ + u8 *buffer; + int speed, speed2, acceleration; + int retval; + + buffer = kzalloc(8, GFP_KERNEL); + if (!buffer) { + dev_err(&mc->intf->dev, "%s - out of memory\n", __FUNCTION__); + return -ENOMEM; + } + + acceleration = mc->acceleration[motor] * 10; + /* -127 <= speed <= 127 */ + speed = (mc->desired_speed[motor] * 127) / 100; + /* -0x7300 <= speed2 <= 0x7300 */ + speed2 = (mc->desired_speed[motor] * 230 * 128) / 100; + + buffer[0] = motor; + buffer[1] = speed; + buffer[2] = acceleration >> 8; + buffer[3] = acceleration; + buffer[4] = speed2 >> 8; + buffer[5] = speed2; + + retval = usb_control_msg(mc->udev, + usb_sndctrlpipe(mc->udev, 0), + 0x09, 0x21, 0x0200, 0x0000, buffer, 8, 2000); + + if (retval != 8) + dev_err(&mc->intf->dev, "usb_control_msg returned %d\n", + retval); + kfree(buffer); + + return retval < 0 ? retval : 0; +} + +static void motorcontrol_irq(struct urb *urb, struct pt_regs *regs) +{ + struct motorcontrol *mc = urb->context; + unsigned char *buffer = mc->data; + int i, level; + int status; + + switch (urb->status) { + case 0: /* success */ + break; + case -ECONNRESET: /* unlink */ + case -ENOENT: + case -ESHUTDOWN: + return; + /* -EPIPE: should clear the halt */ + default: /* error */ + goto resubmit; + } + + /* digital inputs */ + for (i=0; i<4; i++) { + level = (buffer[0] >> i) & 1; + if (mc->inputs[i] != level) { + mc->inputs[i] = level; + set_bit(i, &mc->input_events); + } + } + + /* motor speed */ + if (buffer[2] == 0) { + for (i=0; i<2; i++) { + level = ((s8)buffer[4+i]) * 100 / 127; + if (mc->speed[i] != level) { + mc->speed[i] = level; + set_bit(i, &mc->speed_events); + } + } + } else { + int index = buffer[3] & 1; + + level = ((s8)buffer[4] << 8) | buffer[5]; + level = level * 100 / 29440; + if (mc->speed[index] != level) { + mc->speed[index] = level; + set_bit(index, &mc->speed_events); + } + + level = ((s8)buffer[6] << 8) | buffer[7]; + mc->_current[index] = level * 100 / 1572; + } + + if (buffer[1] & 1) + set_bit(0, &mc->exceed_events); + + if (buffer[1] & 2) + set_bit(1, &mc->exceed_events); + + if (mc->input_events || mc->exceed_events || mc->speed_events) + schedule_work(&mc->do_notify); + +resubmit: + status = usb_submit_urb(urb, SLAB_ATOMIC); + if (status) + dev_err(&mc->intf->dev, + "can't resubmit intr, %s-%s/motorcontrol0, status %d", + mc->udev->bus->bus_name, + mc->udev->devpath, status); +} + +static void do_notify(void *data) +{ + struct motorcontrol *mc = data; + int i; + char sysfs_file[8]; + + for (i=0; i<4; i++) { + if (test_and_clear_bit(i, &mc->input_events)) { + sprintf(sysfs_file, "input%d", i); + sysfs_notify(&mc->dev->kobj, NULL, sysfs_file); + } + } + + for (i=0; i<2; i++) { + if (test_and_clear_bit(i, &mc->speed_events)) { + sprintf(sysfs_file, "speed%d", i); + sysfs_notify(&mc->dev->kobj, NULL, sysfs_file); + } + } + + for (i=0; i<2; i++) { + if (test_and_clear_bit(i, &mc->exceed_events)) + dev_warn(&mc->intf->dev, + "motor #%d exceeds 1.5 Amp current limit\n", i); + } +} + +#define show_set_speed(value) \ +static ssize_t set_speed##value(struct device *dev, \ + struct device_attribute *attr, \ + const char *buf, size_t count) \ +{ \ + struct motorcontrol *mc = dev_get_drvdata(dev); \ + int speed; \ + int retval; \ + \ + if (sscanf(buf, "%d", &speed) < 1) \ + return -EINVAL; \ + \ + if (speed < -100 || speed > 100) \ + return -EINVAL; \ + \ + mc->desired_speed[value] = speed; \ + \ + retval = set_motor(mc, value); \ + \ + return retval ? retval : count; \ +} \ + \ +static ssize_t show_speed##value(struct device *dev, \ + struct device_attribute *attr, \ + char *buf) \ +{ \ + struct motorcontrol *mc = dev_get_drvdata(dev); \ + \ + return sprintf(buf, "%d\n", mc->speed[value]); \ +} + +#define speed_attr(value) \ + __ATTR(speed##value, S_IWUGO | S_IRUGO, \ + show_speed##value, set_speed##value) + +show_set_speed(0); +show_set_speed(1); + +#define show_set_acceleration(value) \ +static ssize_t set_acceleration##value(struct device *dev, \ + struct device_attribute *attr, \ + const char *buf, size_t count) \ +{ \ + struct motorcontrol *mc = dev_get_drvdata(dev); \ + int acceleration; \ + int retval; \ + \ + if (sscanf(buf, "%d", &acceleration) < 1) \ + return -EINVAL; \ + \ + if (acceleration < 0 || acceleration > 100) \ + return -EINVAL; \ + \ + mc->acceleration[value] = acceleration; \ + \ + retval = set_motor(mc, value); \ + \ + return retval ? retval : count; \ +} \ + \ +static ssize_t show_acceleration##value(struct device *dev, \ + struct device_attribute *attr, \ + char *buf) \ +{ \ + struct motorcontrol *mc = dev_get_drvdata(dev); \ + \ + return sprintf(buf, "%d\n", mc->acceleration[value]); \ +} + +#define acceleration_attr(value) \ + __ATTR(acceleration##value, S_IWUGO | S_IRUGO, \ + show_acceleration##value, set_acceleration##value) + +show_set_acceleration(0); +show_set_acceleration(1); + +#define show_current(value) \ +static ssize_t show_current##value(struct device *dev, \ + struct device_attribute *attr, \ + char *buf) \ +{ \ + struct motorcontrol *mc = dev_get_drvdata(dev); \ + \ + return sprintf(buf, "%dmA\n", (int)mc->_current[value]); \ +} + +#define current_attr(value) \ + __ATTR(current##value, S_IRUGO, show_current##value, NULL) + +show_current(0); +show_current(1); + +#define show_input(value) \ +static ssize_t show_input##value(struct device *dev, \ + struct device_attribute *attr, \ + char *buf) \ +{ \ + struct motorcontrol *mc = dev_get_drvdata(dev); \ + \ + return sprintf(buf, "%d\n", (int)mc->inputs[value]); \ +} + +#define input_attr(value) \ + __ATTR(input##value, S_IRUGO, show_input##value, NULL) + +show_input(0); +show_input(1); +show_input(2); +show_input(3); + +static struct device_attribute dev_attrs[] = { + input_attr(0), + input_attr(1), + input_attr(2), + input_attr(3), + speed_attr(0), + speed_attr(1), + acceleration_attr(0), + acceleration_attr(1), + current_attr(0), + current_attr(1) +}; + +static int motorcontrol_probe(struct usb_interface *intf, const struct usb_device_id *id) +{ + struct usb_device *dev = interface_to_usbdev(intf); + struct usb_host_interface *interface; + struct usb_endpoint_descriptor *endpoint; + struct motorcontrol *mc; + int pipe, maxp, rc = -ENOMEM; + int bit, value, i; + + interface = intf->cur_altsetting; + if (interface->desc.bNumEndpoints != 1) + return -ENODEV; + + endpoint = &interface->endpoint[0].desc; + if (!(endpoint->bEndpointAddress & 0x80)) + return -ENODEV; + + /* + * bmAttributes + */ + pipe = usb_rcvintpipe(dev, endpoint->bEndpointAddress); + maxp = usb_maxpacket(dev, pipe, usb_pipeout(pipe)); + + mc = kzalloc(sizeof(*mc), GFP_KERNEL); + if (!mc) + goto out; + + mc->dev_no = -1; + mc->data = usb_buffer_alloc(dev, URB_INT_SIZE, SLAB_ATOMIC, &mc->data_dma); + if (!mc->data) + goto out; + + mc->irq = usb_alloc_urb(0, GFP_KERNEL); + if (!mc->irq) + goto out; + + mc->udev = usb_get_dev(dev); + mc->intf = intf; + mc->acceleration[0] = mc->acceleration[1] = 10; + INIT_WORK(&mc->do_notify, do_notify, mc); + usb_fill_int_urb(mc->irq, mc->udev, pipe, mc->data, + maxp > URB_INT_SIZE ? URB_INT_SIZE : maxp, + motorcontrol_irq, mc, endpoint->bInterval); + mc->irq->transfer_dma = mc->data_dma; + mc->irq->transfer_flags |= URB_NO_TRANSFER_DMA_MAP; + + usb_set_intfdata(intf, mc); + + do { + bit = find_first_zero_bit(&device_no, sizeof(device_no)); + value = test_and_set_bit(bit, &device_no); + } while(value); + mc->dev_no = bit; + + mc->dev = device_create(phidget_class, &mc->udev->dev, 0, + "motorcontrol%d", mc->dev_no); + if (IS_ERR(mc->dev)) { + rc = PTR_ERR(mc->dev); + mc->dev = NULL; + goto out; + } + + dev_set_drvdata(mc->dev, mc); + + if (usb_submit_urb(mc->irq, GFP_KERNEL)) { + rc = -EIO; + goto out; + } + + for (i=0; i<ARRAY_SIZE(dev_attrs); i++) { + rc = device_create_file(mc->dev, &dev_attrs[i]); + if (rc) + goto out2; + } + + dev_info(&intf->dev, "USB PhidgetMotorControl attached\n"); + + return 0; +out2: + while (i-- > 0) + device_remove_file(mc->dev, &dev_attrs[i]); +out: + if (mc) { + if (mc->irq) + usb_free_urb(mc->irq); + if (mc->data) + usb_buffer_free(dev, URB_INT_SIZE, mc->data, mc->data_dma); + if (mc->dev) + device_unregister(mc->dev); + if (mc->dev_no >= 0) + clear_bit(mc->dev_no, &device_no); + + kfree(mc); + } + + return rc; +} + +static void motorcontrol_disconnect(struct usb_interface *interface) +{ + struct motorcontrol *mc; + int i; + + mc = usb_get_intfdata(interface); + usb_set_intfdata(interface, NULL); + if (!mc) + return; + + usb_kill_urb(mc->irq); + usb_free_urb(mc->irq); + usb_buffer_free(mc->udev, URB_INT_SIZE, mc->data, mc->data_dma); + + cancel_delayed_work(&mc->do_notify); + + for (i=0; i<ARRAY_SIZE(dev_attrs); i++) + device_remove_file(mc->dev, &dev_attrs[i]); + + device_unregister(mc->dev); + + usb_put_dev(mc->udev); + clear_bit(mc->dev_no, &device_no); + kfree(mc); + + dev_info(&interface->dev, "USB PhidgetMotorControl detached\n"); +} + +static struct usb_driver motorcontrol_driver = { + .name = "phidgetmotorcontrol", + .probe = motorcontrol_probe, + .disconnect = motorcontrol_disconnect, + .id_table = id_table +}; + +static int __init motorcontrol_init(void) +{ + int retval = 0; + + retval = usb_register(&motorcontrol_driver); + if (retval) + err("usb_register failed. Error number %d", retval); + + return retval; +} + +static void __exit motorcontrol_exit(void) +{ + usb_deregister(&motorcontrol_driver); +} + +module_init(motorcontrol_init); +module_exit(motorcontrol_exit); + +MODULE_AUTHOR(DRIVER_AUTHOR); +MODULE_DESCRIPTION(DRIVER_DESC); +MODULE_LICENSE("GPL"); diff --git a/drivers/usb/misc/phidgetservo.c b/drivers/usb/misc/phidgetservo.c index c0df79c9653..7163f05c5b2 100644 --- a/drivers/usb/misc/phidgetservo.c +++ b/drivers/usb/misc/phidgetservo.c @@ -1,7 +1,7 @@ /* * USB PhidgetServo driver 1.0 * - * Copyright (C) 2004 Sean Young <sean@mess.org> + * Copyright (C) 2004, 2006 Sean Young <sean@mess.org> * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by @@ -15,14 +15,6 @@ * * CAUTION: Generally you should use 0 < degrees < 180 as anything else * is probably beyond the range of your servo and may damage it. - * - * Jun 16, 2004: Sean Young <sean@mess.org> - * - cleanups - * - was using memory after kfree() - * Aug 8, 2004: Sean Young <sean@mess.org> - * - set the highest angle as high as the hardware allows, there are - * some odd servos out there - * */ #include <linux/kernel.h> @@ -32,6 +24,8 @@ #include <linux/module.h> #include <linux/usb.h> +#include "phidget.h" + #define DRIVER_AUTHOR "Sean Young <sean@mess.org>" #define DRIVER_DESC "USB PhidgetServo Driver" @@ -70,8 +64,12 @@ static struct usb_device_id id_table[] = { MODULE_DEVICE_TABLE(usb, id_table); +static int unsigned long device_no; + struct phidget_servo { struct usb_device *udev; + struct device *dev; + int dev_no; ulong type; int pulse[4]; int degrees[4]; @@ -203,16 +201,16 @@ change_position_v20(struct phidget_servo *servo, int servo_no, int degrees, } #define show_set(value) \ -static ssize_t set_servo##value (struct device *dev, struct device_attribute *attr, \ +static ssize_t set_servo##value (struct device *dev, \ + struct device_attribute *attr, \ const char *buf, size_t count) \ { \ int degrees, minutes, retval; \ - struct usb_interface *intf = to_usb_interface (dev); \ - struct phidget_servo *servo = usb_get_intfdata (intf); \ + struct phidget_servo *servo = dev_get_drvdata(dev); \ \ minutes = 0; \ /* must at least convert degrees */ \ - if (sscanf (buf, "%d.%d", °rees, &minutes) < 1) { \ + if (sscanf(buf, "%d.%d", °rees, &minutes) < 1) { \ return -EINVAL; \ } \ \ @@ -220,86 +218,127 @@ static ssize_t set_servo##value (struct device *dev, struct device_attribute *at return -EINVAL; \ \ if (servo->type & SERVO_VERSION_30) \ - retval = change_position_v30 (servo, value, degrees, \ + retval = change_position_v30(servo, value, degrees, \ minutes); \ else \ - retval = change_position_v20 (servo, value, degrees, \ + retval = change_position_v20(servo, value, degrees, \ minutes); \ \ return retval < 0 ? retval : count; \ } \ \ -static ssize_t show_servo##value (struct device *dev, struct device_attribute *attr, char *buf) \ +static ssize_t show_servo##value (struct device *dev, \ + struct device_attribute *attr, \ + char *buf) \ { \ - struct usb_interface *intf = to_usb_interface (dev); \ - struct phidget_servo *servo = usb_get_intfdata (intf); \ + struct phidget_servo *servo = dev_get_drvdata(dev); \ \ - return sprintf (buf, "%d.%02d\n", servo->degrees[value], \ + return sprintf(buf, "%d.%02d\n", servo->degrees[value], \ servo->minutes[value]); \ -} \ -static DEVICE_ATTR(servo##value, S_IWUGO | S_IRUGO, \ - show_servo##value, set_servo##value); +} +#define servo_attr(value) \ + __ATTR(servo##value, S_IWUGO | S_IRUGO, \ + show_servo##value, set_servo##value) show_set(0); show_set(1); show_set(2); show_set(3); +static struct device_attribute dev_attrs[] = { + servo_attr(0), servo_attr(1), servo_attr(2), servo_attr(3) +}; + static int servo_probe(struct usb_interface *interface, const struct usb_device_id *id) { struct usb_device *udev = interface_to_usbdev(interface); struct phidget_servo *dev; + int bit, value, rc; + int servo_count, i; dev = kzalloc(sizeof (struct phidget_servo), GFP_KERNEL); if (dev == NULL) { dev_err(&interface->dev, "%s - out of memory\n", __FUNCTION__); - return -ENOMEM; + rc = -ENOMEM; + goto out; } dev->udev = usb_get_dev(udev); dev->type = id->driver_info; + dev->dev_no = -1; usb_set_intfdata(interface, dev); - device_create_file(&interface->dev, &dev_attr_servo0); - if (dev->type & SERVO_COUNT_QUAD) { - device_create_file(&interface->dev, &dev_attr_servo1); - device_create_file(&interface->dev, &dev_attr_servo2); - device_create_file(&interface->dev, &dev_attr_servo3); + do { + bit = find_first_zero_bit(&device_no, sizeof(device_no)); + value = test_and_set_bit(bit, &device_no); + } while (value); + dev->dev_no = bit; + + dev->dev = device_create(phidget_class, &dev->udev->dev, 0, + "servo%d", dev->dev_no); + if (IS_ERR(dev->dev)) { + rc = PTR_ERR(dev->dev); + dev->dev = NULL; + goto out; + } + + servo_count = dev->type & SERVO_COUNT_QUAD ? 4 : 1; + + for (i=0; i<servo_count; i++) { + rc = device_create_file(dev->dev, &dev_attrs[i]); + if (rc) + goto out2; } dev_info(&interface->dev, "USB %d-Motor PhidgetServo v%d.0 attached\n", - dev->type & SERVO_COUNT_QUAD ? 4 : 1, - dev->type & SERVO_VERSION_30 ? 3 : 2); + servo_count, dev->type & SERVO_VERSION_30 ? 3 : 2); - if(!(dev->type & SERVO_VERSION_30)) + if (!(dev->type & SERVO_VERSION_30)) dev_info(&interface->dev, "WARNING: v2.0 not tested! Please report if it works.\n"); return 0; +out2: + while (i-- > 0) + device_remove_file(dev->dev, &dev_attrs[i]); +out: + if (dev) { + if (dev->dev) + device_unregister(dev->dev); + if (dev->dev_no >= 0) + clear_bit(dev->dev_no, &device_no); + + kfree(dev); + } + + return rc; } static void servo_disconnect(struct usb_interface *interface) { struct phidget_servo *dev; + int servo_count, i; dev = usb_get_intfdata(interface); usb_set_intfdata(interface, NULL); - device_remove_file(&interface->dev, &dev_attr_servo0); - if (dev->type & SERVO_COUNT_QUAD) { - device_remove_file(&interface->dev, &dev_attr_servo1); - device_remove_file(&interface->dev, &dev_attr_servo2); - device_remove_file(&interface->dev, &dev_attr_servo3); - } + if (!dev) + return; + + servo_count = dev->type & SERVO_COUNT_QUAD ? 4 : 1; + + for (i=0; i<servo_count; i++) + device_remove_file(dev->dev, &dev_attrs[i]); + device_unregister(dev->dev); usb_put_dev(dev->udev); dev_info(&interface->dev, "USB %d-Motor PhidgetServo v%d.0 detached\n", - dev->type & SERVO_COUNT_QUAD ? 4 : 1, - dev->type & SERVO_VERSION_30 ? 3 : 2); + servo_count, dev->type & SERVO_VERSION_30 ? 3 : 2); + clear_bit(dev->dev_no, &device_no); kfree(dev); } diff --git a/drivers/usb/misc/sisusbvga/sisusb.c b/drivers/usb/misc/sisusbvga/sisusb.c index e16582f3733..a44124c7e85 100644 --- a/drivers/usb/misc/sisusbvga/sisusb.c +++ b/drivers/usb/misc/sisusbvga/sisusb.c @@ -3179,7 +3179,7 @@ sisusb_compat_ioctl(struct file *f, unsigned int cmd, unsigned long arg) } #endif -static struct file_operations usb_sisusb_fops = { +static const struct file_operations usb_sisusb_fops = { .owner = THIS_MODULE, .open = sisusb_open, .release = sisusb_release, diff --git a/drivers/usb/misc/usb_u132.h b/drivers/usb/misc/usb_u132.h new file mode 100644 index 00000000000..551ba8906d6 --- /dev/null +++ b/drivers/usb/misc/usb_u132.h @@ -0,0 +1,97 @@ +/* +* Common Header File for the Elan Digital Systems U132 adapter +* this file should be included by both the "ftdi-u132" and +* the "u132-hcd" modules. +* +* Copyright(C) 2006 Elan Digital Systems Limited +*(http://www.elandigitalsystems.com) +* +* Author and Maintainer - Tony Olech - Elan Digital Systems +*(tony.olech@elandigitalsystems.com) +* +* This program is free software;you can redistribute it and/or +* modify it under the terms of the GNU General Public License as +* published by the Free Software Foundation, version 2. +* +* +* The driver was written by Tony Olech(tony.olech@elandigitalsystems.com) +* based on various USB client drivers in the 2.6.15 linux kernel +* with constant reference to the 3rd Edition of Linux Device Drivers +* published by O'Reilly +* +* The U132 adapter is a USB to CardBus adapter specifically designed +* for PC cards that contain an OHCI host controller. Typical PC cards +* are the Orange Mobile 3G Option GlobeTrotter Fusion card. +* +* The U132 adapter will *NOT *work with PC cards that do not contain +* an OHCI controller. A simple way to test whether a PC card has an +* OHCI controller as an interface is to insert the PC card directly +* into a laptop(or desktop) with a CardBus slot and if "lspci" shows +* a new USB controller and "lsusb -v" shows a new OHCI Host Controller +* then there is a good chance that the U132 adapter will support the +* PC card.(you also need the specific client driver for the PC card) +* +* Please inform the Author and Maintainer about any PC cards that +* contain OHCI Host Controller and work when directly connected to +* an embedded CardBus slot but do not work when they are connected +* via an ELAN U132 adapter. +* +* The driver consists of two modules, the "ftdi-u132" module is +* a USB client driver that interfaces to the FTDI chip within +* the U132 adapter manufactured by Elan Digital Systems, and the +* "u132-hcd" module is a USB host controller driver that talks +* to the OHCI controller within CardBus card that are inserted +* in the U132 adapter. +* +* The "ftdi-u132" module should be loaded automatically by the +* hot plug system when the U132 adapter is plugged in. The module +* initialises the adapter which mostly consists of synchronising +* the FTDI chip, before continuously polling the adapter to detect +* PC card insertions. As soon as a PC card containing a recognised +* OHCI controller is seen the "ftdi-u132" module explicitly requests +* the kernel to load the "u132-hcd" module. +* +* The "ftdi-u132" module provides the interface to the inserted +* PC card and the "u132-hcd" module uses the API to send and recieve +* data. The API features call-backs, so that part of the "u132-hcd" +* module code will run in the context of one of the kernel threads +* of the "ftdi-u132" module. +* +*/ +int ftdi_elan_switch_on_diagnostics(int number); +void ftdi_elan_gone_away(struct platform_device *pdev); +void start_usb_lock_device_tracing(void); +struct u132_platform_data { + u16 vendor; + u16 device; + u8 potpg; + void (*port_power) (struct device *dev, int is_on); + void (*reset) (struct device *dev); +}; +int usb_ftdi_elan_edset_single(struct platform_device *pdev, u8 ed_number, + void *endp, struct urb *urb, u8 address, u8 ep_number, u8 toggle_bits, + void (*callback) (void *endp, struct urb *urb, u8 *buf, int len, + int toggle_bits, int error_count, int condition_code, int repeat_number, + int halted, int skipped, int actual, int non_null)); +int usb_ftdi_elan_edset_output(struct platform_device *pdev, u8 ed_number, + void *endp, struct urb *urb, u8 address, u8 ep_number, u8 toggle_bits, + void (*callback) (void *endp, struct urb *urb, u8 *buf, int len, + int toggle_bits, int error_count, int condition_code, int repeat_number, + int halted, int skipped, int actual, int non_null)); +int usb_ftdi_elan_edset_empty(struct platform_device *pdev, u8 ed_number, + void *endp, struct urb *urb, u8 address, u8 ep_number, u8 toggle_bits, + void (*callback) (void *endp, struct urb *urb, u8 *buf, int len, + int toggle_bits, int error_count, int condition_code, int repeat_number, + int halted, int skipped, int actual, int non_null)); +int usb_ftdi_elan_edset_input(struct platform_device *pdev, u8 ed_number, + void *endp, struct urb *urb, u8 address, u8 ep_number, u8 toggle_bits, + void (*callback) (void *endp, struct urb *urb, u8 *buf, int len, + int toggle_bits, int error_count, int condition_code, int repeat_number, + int halted, int skipped, int actual, int non_null)); +int usb_ftdi_elan_edset_setup(struct platform_device *pdev, u8 ed_number, + void *endp, struct urb *urb, u8 address, u8 ep_number, u8 toggle_bits, + void (*callback) (void *endp, struct urb *urb, u8 *buf, int len, + int toggle_bits, int error_count, int condition_code, int repeat_number, + int halted, int skipped, int actual, int non_null)); +int usb_ftdi_elan_edset_flush(struct platform_device *pdev, u8 ed_number, + void *endp); diff --git a/drivers/usb/misc/usblcd.c b/drivers/usb/misc/usblcd.c index e095772dd8e..dbaca9f1efa 100644 --- a/drivers/usb/misc/usblcd.c +++ b/drivers/usb/misc/usblcd.c @@ -239,7 +239,7 @@ error: return retval; } -static struct file_operations lcd_fops = { +static const struct file_operations lcd_fops = { .owner = THIS_MODULE, .read = lcd_read, .write = lcd_write, @@ -290,9 +290,7 @@ static int lcd_probe(struct usb_interface *interface, const struct usb_device_id endpoint = &iface_desc->endpoint[i].desc; if (!dev->bulk_in_endpointAddr && - (endpoint->bEndpointAddress & USB_DIR_IN) && - ((endpoint->bmAttributes & USB_ENDPOINT_XFERTYPE_MASK) - == USB_ENDPOINT_XFER_BULK)) { + usb_endpoint_is_bulk_in(endpoint)) { /* we found a bulk in endpoint */ buffer_size = le16_to_cpu(endpoint->wMaxPacketSize); dev->bulk_in_size = buffer_size; @@ -305,9 +303,7 @@ static int lcd_probe(struct usb_interface *interface, const struct usb_device_id } if (!dev->bulk_out_endpointAddr && - !(endpoint->bEndpointAddress & USB_DIR_IN) && - ((endpoint->bmAttributes & USB_ENDPOINT_XFERTYPE_MASK) - == USB_ENDPOINT_XFER_BULK)) { + usb_endpoint_is_bulk_out(endpoint)) { /* we found a bulk out endpoint */ dev->bulk_out_endpointAddr = endpoint->bEndpointAddress; } diff --git a/drivers/usb/misc/usbled.c b/drivers/usb/misc/usbled.c index 0c5ee0ad6bb..49c5c5c4c43 100644 --- a/drivers/usb/misc/usbled.c +++ b/drivers/usb/misc/usbled.c @@ -108,22 +108,34 @@ static int led_probe(struct usb_interface *interface, const struct usb_device_id dev = kzalloc(sizeof(struct usb_led), GFP_KERNEL); if (dev == NULL) { dev_err(&interface->dev, "Out of memory\n"); - goto error; + goto error_mem; } dev->udev = usb_get_dev(udev); usb_set_intfdata (interface, dev); - device_create_file(&interface->dev, &dev_attr_blue); - device_create_file(&interface->dev, &dev_attr_red); - device_create_file(&interface->dev, &dev_attr_green); + retval = device_create_file(&interface->dev, &dev_attr_blue); + if (retval) + goto error; + retval = device_create_file(&interface->dev, &dev_attr_red); + if (retval) + goto error; + retval = device_create_file(&interface->dev, &dev_attr_green); + if (retval) + goto error; dev_info(&interface->dev, "USB LED device now attached\n"); return 0; error: + device_remove_file(&interface->dev, &dev_attr_blue); + device_remove_file(&interface->dev, &dev_attr_red); + device_remove_file(&interface->dev, &dev_attr_green); + usb_set_intfdata (interface, NULL); + usb_put_dev(dev->udev); kfree(dev); +error_mem: return retval; } diff --git a/drivers/usb/mon/mon_main.c b/drivers/usb/mon/mon_main.c index 275a66f8305..394bbf2f68d 100644 --- a/drivers/usb/mon/mon_main.c +++ b/drivers/usb/mon/mon_main.c @@ -265,7 +265,6 @@ static void mon_dissolve(struct mon_bus *mbus, struct usb_bus *ubus) ubus->mon_bus = NULL; mbus->u_bus = NULL; mb(); - // usb_bus_put(ubus); } /* @@ -297,12 +296,12 @@ static void mon_bus_init(struct dentry *mondir, struct usb_bus *ubus) INIT_LIST_HEAD(&mbus->r_list); /* - * This usb_bus_get here is superfluous, because we receive - * a notification if usb_bus is about to be removed. + * We don't need to take a reference to ubus, because we receive + * a notification if the bus is about to be removed. */ - // usb_bus_get(ubus); mbus->u_bus = ubus; ubus->mon_bus = mbus; + mbus->uses_dma = ubus->uses_dma; rc = snprintf(name, NAMESZ, "%dt", ubus->busnum); if (rc <= 0 || rc >= NAMESZ) diff --git a/drivers/usb/mon/mon_stat.c b/drivers/usb/mon/mon_stat.c index 1fe01d994a7..f6d1491256c 100644 --- a/drivers/usb/mon/mon_stat.c +++ b/drivers/usb/mon/mon_stat.c @@ -28,7 +28,7 @@ static int mon_stat_open(struct inode *inode, struct file *file) if ((sp = kmalloc(sizeof(struct snap), GFP_KERNEL)) == NULL) return -ENOMEM; - mbus = inode->u.generic_ip; + mbus = inode->i_private; sp->slen = snprintf(sp->str, STAT_BUF_SIZE, "nreaders %d events %u text_lost %u\n", @@ -62,7 +62,7 @@ static int mon_stat_release(struct inode *inode, struct file *file) return 0; } -struct file_operations mon_fops_stat = { +const struct file_operations mon_fops_stat = { .owner = THIS_MODULE, .open = mon_stat_open, .llseek = no_llseek, diff --git a/drivers/usb/mon/mon_text.c b/drivers/usb/mon/mon_text.c index f961a770cee..7a2346c5328 100644 --- a/drivers/usb/mon/mon_text.c +++ b/drivers/usb/mon/mon_text.c @@ -75,13 +75,13 @@ static void mon_text_ctor(void *, kmem_cache_t *, unsigned long); */ static inline char mon_text_get_setup(struct mon_event_text *ep, - struct urb *urb, char ev_type) + struct urb *urb, char ev_type, struct mon_bus *mbus) { if (!usb_pipecontrol(urb->pipe) || ev_type != 'S') return '-'; - if (urb->transfer_flags & URB_NO_SETUP_DMA_MAP) + if (mbus->uses_dma && (urb->transfer_flags & URB_NO_SETUP_DMA_MAP)) return mon_dmapeek(ep->setup, urb->setup_dma, SETUP_MAX); if (urb->setup_packet == NULL) return 'Z'; /* '0' would be not as pretty. */ @@ -91,7 +91,7 @@ static inline char mon_text_get_setup(struct mon_event_text *ep, } static inline char mon_text_get_data(struct mon_event_text *ep, struct urb *urb, - int len, char ev_type) + int len, char ev_type, struct mon_bus *mbus) { int pipe = urb->pipe; @@ -117,7 +117,7 @@ static inline char mon_text_get_data(struct mon_event_text *ep, struct urb *urb, * contain non-NULL garbage in case the upper level promised to * set DMA for the HCD. */ - if (urb->transfer_flags & URB_NO_TRANSFER_DMA_MAP) + if (mbus->uses_dma && (urb->transfer_flags & URB_NO_TRANSFER_DMA_MAP)) return mon_dmapeek(ep->data, urb->transfer_dma, len); if (urb->transfer_buffer == NULL) @@ -161,8 +161,9 @@ static void mon_text_event(struct mon_reader_text *rp, struct urb *urb, /* Collecting status makes debugging sense for submits, too */ ep->status = urb->status; - ep->setup_flag = mon_text_get_setup(ep, urb, ev_type); - ep->data_flag = mon_text_get_data(ep, urb, ep->length, ev_type); + ep->setup_flag = mon_text_get_setup(ep, urb, ev_type, rp->r.m_bus); + ep->data_flag = mon_text_get_data(ep, urb, ep->length, ev_type, + rp->r.m_bus); rp->nevents++; list_add_tail(&ep->e_link, &rp->e_list); @@ -238,7 +239,7 @@ static int mon_text_open(struct inode *inode, struct file *file) int rc; mutex_lock(&mon_lock); - mbus = inode->u.generic_ip; + mbus = inode->i_private; ubus = mbus->u_bus; rp = kzalloc(sizeof(struct mon_reader_text), GFP_KERNEL); @@ -401,7 +402,7 @@ static int mon_text_release(struct inode *inode, struct file *file) struct mon_event_text *ep; mutex_lock(&mon_lock); - mbus = inode->u.generic_ip; + mbus = inode->i_private; if (mbus->nreaders <= 0) { printk(KERN_ERR TAG ": consistency error on close\n"); @@ -435,7 +436,7 @@ static int mon_text_release(struct inode *inode, struct file *file) return 0; } -struct file_operations mon_fops_text = { +const struct file_operations mon_fops_text = { .owner = THIS_MODULE, .open = mon_text_open, .llseek = no_llseek, diff --git a/drivers/usb/mon/usb_mon.h b/drivers/usb/mon/usb_mon.h index 33678c24ebe..ab9d02d5df7 100644 --- a/drivers/usb/mon/usb_mon.h +++ b/drivers/usb/mon/usb_mon.h @@ -20,6 +20,7 @@ struct mon_bus { struct dentry *dent_s; /* Debugging file */ struct dentry *dent_t; /* Text interface file */ struct usb_bus *u_bus; + int uses_dma; /* Ref */ int nreaders; /* Under mon_lock AND mbus->lock */ @@ -53,7 +54,7 @@ extern char mon_dmapeek(unsigned char *dst, dma_addr_t dma_addr, int len); extern struct mutex mon_lock; -extern struct file_operations mon_fops_text; -extern struct file_operations mon_fops_stat; +extern const struct file_operations mon_fops_text; +extern const struct file_operations mon_fops_stat; #endif /* __USB_MON_H */ diff --git a/drivers/usb/net/asix.c b/drivers/usb/net/asix.c index 2e2bbc003e9..9b97aa6384c 100644 --- a/drivers/usb/net/asix.c +++ b/drivers/usb/net/asix.c @@ -1,7 +1,8 @@ /* * ASIX AX8817X based USB 2.0 Ethernet Devices - * Copyright (C) 2003-2005 David Hollis <dhollis@davehollis.com> + * Copyright (C) 2003-2006 David Hollis <dhollis@davehollis.com> * Copyright (C) 2005 Phil Chang <pchang23@sbcglobal.net> + * Copyright (C) 2006 James Painter <jamie.painter@iname.com> * Copyright (c) 2002-2003 TiVo Inc. * * This program is free software; you can redistribute it and/or modify @@ -36,6 +37,9 @@ #include "usbnet.h" +#define DRIVER_VERSION "14-Jun-2006" +static const char driver_name [] = "asix"; + /* ASIX AX8817X based USB 2.0 Ethernet Devices */ #define AX_CMD_SET_SW_MII 0x06 @@ -46,23 +50,25 @@ #define AX_CMD_WRITE_EEPROM 0x0c #define AX_CMD_WRITE_ENABLE 0x0d #define AX_CMD_WRITE_DISABLE 0x0e +#define AX_CMD_READ_RX_CTL 0x0f #define AX_CMD_WRITE_RX_CTL 0x10 #define AX_CMD_READ_IPG012 0x11 #define AX_CMD_WRITE_IPG0 0x12 #define AX_CMD_WRITE_IPG1 0x13 +#define AX_CMD_READ_NODE_ID 0x13 #define AX_CMD_WRITE_IPG2 0x14 #define AX_CMD_WRITE_MULTI_FILTER 0x16 -#define AX_CMD_READ_NODE_ID 0x17 +#define AX88172_CMD_READ_NODE_ID 0x17 #define AX_CMD_READ_PHY_ID 0x19 #define AX_CMD_READ_MEDIUM_STATUS 0x1a #define AX_CMD_WRITE_MEDIUM_MODE 0x1b #define AX_CMD_READ_MONITOR_MODE 0x1c #define AX_CMD_WRITE_MONITOR_MODE 0x1d +#define AX_CMD_READ_GPIOS 0x1e #define AX_CMD_WRITE_GPIOS 0x1f #define AX_CMD_SW_RESET 0x20 #define AX_CMD_SW_PHY_STATUS 0x21 #define AX_CMD_SW_PHY_SELECT 0x22 -#define AX88772_CMD_READ_NODE_ID 0x13 #define AX_MONITOR_MODE 0x01 #define AX_MONITOR_LINK 0x02 @@ -70,15 +76,15 @@ #define AX_MONITOR_HSFS 0x10 /* AX88172 Medium Status Register values */ -#define AX_MEDIUM_FULL_DUPLEX 0x02 -#define AX_MEDIUM_TX_ABORT_ALLOW 0x04 -#define AX_MEDIUM_FLOW_CONTROL_EN 0x10 +#define AX88172_MEDIUM_FD 0x02 +#define AX88172_MEDIUM_TX 0x04 +#define AX88172_MEDIUM_FC 0x10 +#define AX88172_MEDIUM_DEFAULT \ + ( AX88172_MEDIUM_FD | AX88172_MEDIUM_TX | AX88172_MEDIUM_FC ) #define AX_MCAST_FILTER_SIZE 8 #define AX_MAX_MCAST 64 -#define AX_EEPROM_LEN 0x40 - #define AX_SWRESET_CLEAR 0x00 #define AX_SWRESET_RR 0x01 #define AX_SWRESET_RT 0x02 @@ -92,23 +98,78 @@ #define AX88772_IPG1_DEFAULT 0x0c #define AX88772_IPG2_DEFAULT 0x12 -#define AX88772_MEDIUM_FULL_DUPLEX 0x0002 -#define AX88772_MEDIUM_RESERVED 0x0004 -#define AX88772_MEDIUM_RX_FC_ENABLE 0x0010 -#define AX88772_MEDIUM_TX_FC_ENABLE 0x0020 -#define AX88772_MEDIUM_PAUSE_FORMAT 0x0080 -#define AX88772_MEDIUM_RX_ENABLE 0x0100 -#define AX88772_MEDIUM_100MB 0x0200 -#define AX88772_MEDIUM_DEFAULT \ - (AX88772_MEDIUM_FULL_DUPLEX | AX88772_MEDIUM_RX_FC_ENABLE | \ - AX88772_MEDIUM_TX_FC_ENABLE | AX88772_MEDIUM_100MB | \ - AX88772_MEDIUM_RESERVED | AX88772_MEDIUM_RX_ENABLE ) +/* AX88772 & AX88178 Medium Mode Register */ +#define AX_MEDIUM_PF 0x0080 +#define AX_MEDIUM_JFE 0x0040 +#define AX_MEDIUM_TFC 0x0020 +#define AX_MEDIUM_RFC 0x0010 +#define AX_MEDIUM_ENCK 0x0008 +#define AX_MEDIUM_AC 0x0004 +#define AX_MEDIUM_FD 0x0002 +#define AX_MEDIUM_GM 0x0001 +#define AX_MEDIUM_SM 0x1000 +#define AX_MEDIUM_SBP 0x0800 +#define AX_MEDIUM_PS 0x0200 +#define AX_MEDIUM_RE 0x0100 + +#define AX88178_MEDIUM_DEFAULT \ + (AX_MEDIUM_PS | AX_MEDIUM_FD | AX_MEDIUM_AC | \ + AX_MEDIUM_RFC | AX_MEDIUM_TFC | AX_MEDIUM_JFE | \ + AX_MEDIUM_RE ) -#define AX_EEPROM_MAGIC 0xdeadbeef +#define AX88772_MEDIUM_DEFAULT \ + (AX_MEDIUM_FD | AX_MEDIUM_RFC | \ + AX_MEDIUM_TFC | AX_MEDIUM_PS | \ + AX_MEDIUM_AC | AX_MEDIUM_RE ) + +/* AX88772 & AX88178 RX_CTL values */ +#define AX_RX_CTL_SO 0x0080 +#define AX_RX_CTL_AP 0x0020 +#define AX_RX_CTL_AM 0x0010 +#define AX_RX_CTL_AB 0x0008 +#define AX_RX_CTL_SEP 0x0004 +#define AX_RX_CTL_AMALL 0x0002 +#define AX_RX_CTL_PRO 0x0001 +#define AX_RX_CTL_MFB_2048 0x0000 +#define AX_RX_CTL_MFB_4096 0x0100 +#define AX_RX_CTL_MFB_8192 0x0200 +#define AX_RX_CTL_MFB_16384 0x0300 + +#define AX_DEFAULT_RX_CTL \ + (AX_RX_CTL_SO | AX_RX_CTL_AB ) + +/* GPIO 0 .. 2 toggles */ +#define AX_GPIO_GPO0EN 0x01 /* GPIO0 Output enable */ +#define AX_GPIO_GPO_0 0x02 /* GPIO0 Output value */ +#define AX_GPIO_GPO1EN 0x04 /* GPIO1 Output enable */ +#define AX_GPIO_GPO_1 0x08 /* GPIO1 Output value */ +#define AX_GPIO_GPO2EN 0x10 /* GPIO2 Output enable */ +#define AX_GPIO_GPO_2 0x20 /* GPIO2 Output value */ +#define AX_GPIO_RESERVED 0x40 /* Reserved */ +#define AX_GPIO_RSE 0x80 /* Reload serial EEPROM */ + +#define AX_EEPROM_MAGIC 0xdeadbeef +#define AX88172_EEPROM_LEN 0x40 +#define AX88772_EEPROM_LEN 0xff + +#define PHY_MODE_MARVELL 0x0000 +#define MII_MARVELL_LED_CTRL 0x0018 +#define MII_MARVELL_STATUS 0x001b +#define MII_MARVELL_CTRL 0x0014 + +#define MARVELL_LED_MANUAL 0x0019 + +#define MARVELL_STATUS_HWCFG 0x0004 + +#define MARVELL_CTRL_TXDELAY 0x0002 +#define MARVELL_CTRL_RXDELAY 0x0080 /* This structure cannot exceed sizeof(unsigned long [5]) AKA 20 bytes */ struct asix_data { u8 multi_filter[AX_MCAST_FILTER_SIZE]; + u8 phymode; + u8 ledmode; + u8 eeprom_len; }; struct ax88172_int_data { @@ -122,6 +183,8 @@ struct ax88172_int_data { static int asix_read_cmd(struct usbnet *dev, u8 cmd, u16 value, u16 index, u16 size, void *data) { + devdbg(dev,"asix_read_cmd() cmd=0x%02x value=0x%04x index=0x%04x size=%d", + cmd, value, index, size); return usb_control_msg( dev->udev, usb_rcvctrlpipe(dev->udev, 0), @@ -137,6 +200,8 @@ static int asix_read_cmd(struct usbnet *dev, u8 cmd, u16 value, u16 index, static int asix_write_cmd(struct usbnet *dev, u8 cmd, u16 value, u16 index, u16 size, void *data) { + devdbg(dev,"asix_write_cmd() cmd=0x%02x value=0x%04x index=0x%04x size=%d", + cmd, value, index, size); return usb_control_msg( dev->udev, usb_sndctrlpipe(dev->udev, 0), @@ -161,12 +226,167 @@ static void asix_async_cmd_callback(struct urb *urb, struct pt_regs *regs) usb_free_urb(urb); } +static void +asix_write_cmd_async(struct usbnet *dev, u8 cmd, u16 value, u16 index, + u16 size, void *data) +{ + struct usb_ctrlrequest *req; + int status; + struct urb *urb; + + devdbg(dev,"asix_write_cmd_async() cmd=0x%02x value=0x%04x index=0x%04x size=%d", + cmd, value, index, size); + if ((urb = usb_alloc_urb(0, GFP_ATOMIC)) == NULL) { + deverr(dev, "Error allocating URB in write_cmd_async!"); + return; + } + + if ((req = kmalloc(sizeof(struct usb_ctrlrequest), GFP_ATOMIC)) == NULL) { + deverr(dev, "Failed to allocate memory for control request"); + usb_free_urb(urb); + return; + } + + req->bRequestType = USB_DIR_OUT | USB_TYPE_VENDOR | USB_RECIP_DEVICE; + req->bRequest = cmd; + req->wValue = value; + req->wIndex = index; + req->wLength = size; + + usb_fill_control_urb(urb, dev->udev, + usb_sndctrlpipe(dev->udev, 0), + (void *)req, data, size, + asix_async_cmd_callback, req); + + if((status = usb_submit_urb(urb, GFP_ATOMIC)) < 0) { + deverr(dev, "Error submitting the control message: status=%d", + status); + kfree(req); + usb_free_urb(urb); + } +} + +static int asix_rx_fixup(struct usbnet *dev, struct sk_buff *skb) +{ + u8 *head; + u32 header; + char *packet; + struct sk_buff *ax_skb; + u16 size; + + head = (u8 *) skb->data; + memcpy(&header, head, sizeof(header)); + le32_to_cpus(&header); + packet = head + sizeof(header); + + skb_pull(skb, 4); + + while (skb->len > 0) { + if ((short)(header & 0x0000ffff) != + ~((short)((header & 0xffff0000) >> 16))) { + deverr(dev,"asix_rx_fixup() Bad Header Length"); + } + /* get the packet length */ + size = (u16) (header & 0x0000ffff); + + if ((skb->len) - ((size + 1) & 0xfffe) == 0) + return 2; + if (size > ETH_FRAME_LEN) { + deverr(dev,"asix_rx_fixup() Bad RX Length %d", size); + return 0; + } + ax_skb = skb_clone(skb, GFP_ATOMIC); + if (ax_skb) { + ax_skb->len = size; + ax_skb->data = packet; + ax_skb->tail = packet + size; + usbnet_skb_return(dev, ax_skb); + } else { + return 0; + } + + skb_pull(skb, (size + 1) & 0xfffe); + + if (skb->len == 0) + break; + + head = (u8 *) skb->data; + memcpy(&header, head, sizeof(header)); + le32_to_cpus(&header); + packet = head + sizeof(header); + skb_pull(skb, 4); + } + + if (skb->len < 0) { + deverr(dev,"asix_rx_fixup() Bad SKB Length %d", skb->len); + return 0; + } + return 1; +} + +static struct sk_buff *asix_tx_fixup(struct usbnet *dev, struct sk_buff *skb, + gfp_t flags) +{ + int padlen; + int headroom = skb_headroom(skb); + int tailroom = skb_tailroom(skb); + u32 packet_len; + u32 padbytes = 0xffff0000; + + padlen = ((skb->len + 4) % 512) ? 0 : 4; + + if ((!skb_cloned(skb)) + && ((headroom + tailroom) >= (4 + padlen))) { + if ((headroom < 4) || (tailroom < padlen)) { + skb->data = memmove(skb->head + 4, skb->data, skb->len); + skb->tail = skb->data + skb->len; + } + } else { + struct sk_buff *skb2; + skb2 = skb_copy_expand(skb, 4, padlen, flags); + dev_kfree_skb_any(skb); + skb = skb2; + if (!skb) + return NULL; + } + + skb_push(skb, 4); + packet_len = (((skb->len - 4) ^ 0x0000ffff) << 16) + (skb->len - 4); + memcpy(skb->data, &packet_len, sizeof(packet_len)); + + if ((skb->len % 512) == 0) { + memcpy( skb->tail, &padbytes, sizeof(padbytes)); + skb_put(skb, sizeof(padbytes)); + } + return skb; +} + +static void asix_status(struct usbnet *dev, struct urb *urb) +{ + struct ax88172_int_data *event; + int link; + + if (urb->actual_length < 8) + return; + + event = urb->transfer_buffer; + link = event->link & 0x01; + if (netif_carrier_ok(dev->net) != link) { + if (link) { + netif_carrier_on(dev->net); + usbnet_defer_kevent (dev, EVENT_LINK_RESET ); + } else + netif_carrier_off(dev->net); + devdbg(dev, "Link Status is: %d", link); + } +} + static inline int asix_set_sw_mii(struct usbnet *dev) { int ret; ret = asix_write_cmd(dev, AX_CMD_SET_SW_MII, 0x0000, 0, 0, NULL); if (ret < 0) - devdbg(dev, "Failed to enable software MII access"); + deverr(dev, "Failed to enable software MII access"); return ret; } @@ -175,24 +395,27 @@ static inline int asix_set_hw_mii(struct usbnet *dev) int ret; ret = asix_write_cmd(dev, AX_CMD_SET_HW_MII, 0x0000, 0, 0, NULL); if (ret < 0) - devdbg(dev, "Failed to enable hardware MII access"); + deverr(dev, "Failed to enable hardware MII access"); return ret; } -static inline int asix_get_phyid(struct usbnet *dev) +static inline int asix_get_phy_addr(struct usbnet *dev) { int ret = 0; void *buf; + devdbg(dev, "asix_get_phy_addr()"); + buf = kmalloc(2, GFP_KERNEL); if (!buf) goto out1; if ((ret = asix_read_cmd(dev, AX_CMD_READ_PHY_ID, 0, 0, 2, buf)) < 2) { - devdbg(dev, "Error reading PHYID register: %02x", ret); + deverr(dev, "Error reading PHYID register: %02x", ret); goto out2; } + devdbg(dev, "asix_get_phy_addr() returning 0x%04x", *((u16 *)buf)); ret = *((u8 *)buf + 1); out2: kfree(buf); @@ -206,8 +429,29 @@ static int asix_sw_reset(struct usbnet *dev, u8 flags) ret = asix_write_cmd(dev, AX_CMD_SW_RESET, flags, 0, 0, NULL); if (ret < 0) - devdbg(dev,"Failed to send software reset: %02x", ret); + deverr(dev,"Failed to send software reset: %02x", ret); + + return ret; +} + +static u16 asix_read_rx_ctl(struct usbnet *dev) +{ + u16 ret = 0; + void *buf; + + buf = kmalloc(2, GFP_KERNEL); + if (!buf) + goto out1; + if ((ret = asix_read_cmd(dev, AX_CMD_READ_RX_CTL, + 0, 0, 2, buf)) < 2) { + deverr(dev, "Error reading RX_CTL register: %02x", ret); + goto out2; + } + ret = le16_to_cpu(*((u16 *)buf)); +out2: + kfree(buf); +out1: return ret; } @@ -215,82 +459,79 @@ static int asix_write_rx_ctl(struct usbnet *dev, u16 mode) { int ret; + devdbg(dev,"asix_write_rx_ctl() - mode = 0x%04x", mode); ret = asix_write_cmd(dev, AX_CMD_WRITE_RX_CTL, mode, 0, 0, NULL); if (ret < 0) - devdbg(dev, "Failed to write RX_CTL mode: %02x", ret); + deverr(dev, "Failed to write RX_CTL mode to 0x%04x: %02x", + mode, ret); return ret; } -static void asix_status(struct usbnet *dev, struct urb *urb) +static u16 asix_read_medium_status(struct usbnet *dev) { - struct ax88172_int_data *event; - int link; + u16 ret = 0; + void *buf; - if (urb->actual_length < 8) - return; + buf = kmalloc(2, GFP_KERNEL); + if (!buf) + goto out1; - event = urb->transfer_buffer; - link = event->link & 0x01; - if (netif_carrier_ok(dev->net) != link) { - if (link) { - netif_carrier_on(dev->net); - usbnet_defer_kevent (dev, EVENT_LINK_RESET ); - } else - netif_carrier_off(dev->net); - devdbg(dev, "Link Status is: %d", link); + if ((ret = asix_read_cmd(dev, AX_CMD_READ_MEDIUM_STATUS, + 0, 0, 2, buf)) < 2) { + deverr(dev, "Error reading Medium Status register: %02x", ret); + goto out2; } + ret = le16_to_cpu(*((u16 *)buf)); +out2: + kfree(buf); +out1: + return ret; } -static void -asix_write_cmd_async(struct usbnet *dev, u8 cmd, u16 value, u16 index, - u16 size, void *data) +static int asix_write_medium_mode(struct usbnet *dev, u16 mode) { - struct usb_ctrlrequest *req; - int status; - struct urb *urb; + int ret; - if ((urb = usb_alloc_urb(0, GFP_ATOMIC)) == NULL) { - devdbg(dev, "Error allocating URB in write_cmd_async!"); - return; - } + devdbg(dev,"asix_write_medium_mode() - mode = 0x%04x", mode); + ret = asix_write_cmd(dev, AX_CMD_WRITE_MEDIUM_MODE, mode, 0, 0, NULL); + if (ret < 0) + deverr(dev, "Failed to write Medium Mode mode to 0x%04x: %02x", + mode, ret); - if ((req = kmalloc(sizeof(struct usb_ctrlrequest), GFP_ATOMIC)) == NULL) { - deverr(dev, "Failed to allocate memory for control request"); - usb_free_urb(urb); - return; - } + return ret; +} - req->bRequestType = USB_DIR_OUT | USB_TYPE_VENDOR | USB_RECIP_DEVICE; - req->bRequest = cmd; - req->wValue = cpu_to_le16(value); - req->wIndex = cpu_to_le16(index); - req->wLength = cpu_to_le16(size); +static int asix_write_gpio(struct usbnet *dev, u16 value, int sleep) +{ + int ret; - usb_fill_control_urb(urb, dev->udev, - usb_sndctrlpipe(dev->udev, 0), - (void *)req, data, size, - asix_async_cmd_callback, req); + devdbg(dev,"asix_write_gpio() - value = 0x%04x", value); + ret = asix_write_cmd(dev, AX_CMD_WRITE_GPIOS, value, 0, 0, NULL); + if (ret < 0) + deverr(dev, "Failed to write GPIO value 0x%04x: %02x", + value, ret); - if((status = usb_submit_urb(urb, GFP_ATOMIC)) < 0) { - deverr(dev, "Error submitting the control message: status=%d", - status); - kfree(req); - usb_free_urb(urb); - } + if (sleep) + msleep(sleep); + + return ret; } +/* + * AX88772 & AX88178 have a 16-bit RX_CTL value + */ static void asix_set_multicast(struct net_device *net) { struct usbnet *dev = netdev_priv(net); struct asix_data *data = (struct asix_data *)&dev->data; - u8 rx_ctl = 0x8c; + u16 rx_ctl = AX_DEFAULT_RX_CTL; if (net->flags & IFF_PROMISC) { - rx_ctl |= 0x01; + rx_ctl |= AX_RX_CTL_PRO; } else if (net->flags & IFF_ALLMULTI || net->mc_count > AX_MAX_MCAST) { - rx_ctl |= 0x02; + rx_ctl |= AX_RX_CTL_AMALL; } else if (net->mc_count == 0) { /* just broadcast and directed */ } else { @@ -317,7 +558,7 @@ static void asix_set_multicast(struct net_device *net) asix_write_cmd_async(dev, AX_CMD_WRITE_MULTI_FILTER, 0, 0, AX_MCAST_FILTER_SIZE, data->multi_filter); - rx_ctl |= 0x10; + rx_ctl |= AX_RX_CTL_AM; } asix_write_cmd_async(dev, AX_CMD_WRITE_RX_CTL, rx_ctl, 0, 0, NULL); @@ -333,50 +574,43 @@ static int asix_mdio_read(struct net_device *netdev, int phy_id, int loc) (__u16)loc, 2, (u16 *)&res); asix_set_hw_mii(dev); - return res & 0xffff; -} + devdbg(dev, "asix_mdio_read() phy_id=0x%02x, loc=0x%02x, returns=0x%04x", phy_id, loc, le16_to_cpu(res & 0xffff)); -/* same as above, but converts resulting value to cpu byte order */ -static int asix_mdio_read_le(struct net_device *netdev, int phy_id, int loc) -{ - return le16_to_cpu(asix_mdio_read(netdev,phy_id, loc)); + return le16_to_cpu(res & 0xffff); } static void asix_mdio_write(struct net_device *netdev, int phy_id, int loc, int val) { struct usbnet *dev = netdev_priv(netdev); - u16 res = val; + u16 res = cpu_to_le16(val); + devdbg(dev, "asix_mdio_write() phy_id=0x%02x, loc=0x%02x, val=0x%04x", phy_id, loc, val); asix_set_sw_mii(dev); asix_write_cmd(dev, AX_CMD_WRITE_MII_REG, phy_id, (__u16)loc, 2, (u16 *)&res); asix_set_hw_mii(dev); } -/* same as above, but converts new value to le16 byte order before writing */ -static void -asix_mdio_write_le(struct net_device *netdev, int phy_id, int loc, int val) +/* Get the PHY Identifier from the PHYSID1 & PHYSID2 MII registers */ +static u32 asix_get_phyid(struct usbnet *dev) { - asix_mdio_write( netdev, phy_id, loc, cpu_to_le16(val) ); -} + int phy_reg; + u32 phy_id; -static int ax88172_link_reset(struct usbnet *dev) -{ - u16 lpa; - u16 adv; - u16 res; - u8 mode; + phy_reg = asix_mdio_read(dev->net, dev->mii.phy_id, MII_PHYSID1); + if (phy_reg < 0) + return 0; - mode = AX_MEDIUM_TX_ABORT_ALLOW | AX_MEDIUM_FLOW_CONTROL_EN; - lpa = asix_mdio_read_le(dev->net, dev->mii.phy_id, MII_LPA); - adv = asix_mdio_read_le(dev->net, dev->mii.phy_id, MII_ADVERTISE); - res = mii_nway_result(lpa|adv); - if (res & LPA_DUPLEX) - mode |= AX_MEDIUM_FULL_DUPLEX; - asix_write_cmd(dev, AX_CMD_WRITE_MEDIUM_MODE, mode, 0, 0, NULL); + phy_id = (phy_reg & 0xffff) << 16; - return 0; + phy_reg = asix_mdio_read(dev->net, dev->mii.phy_id, MII_PHYSID2); + if (phy_reg < 0) + return 0; + + phy_id |= (phy_reg & 0xffff); + + return phy_id; } static void @@ -423,7 +657,10 @@ asix_set_wol(struct net_device *net, struct ethtool_wolinfo *wolinfo) static int asix_get_eeprom_len(struct net_device *net) { - return AX_EEPROM_LEN; + struct usbnet *dev = netdev_priv(net); + struct asix_data *data = (struct asix_data *)&dev->data; + + return data->eeprom_len; } static int asix_get_eeprom(struct net_device *net, @@ -453,9 +690,14 @@ static int asix_get_eeprom(struct net_device *net, static void asix_get_drvinfo (struct net_device *net, struct ethtool_drvinfo *info) { + struct usbnet *dev = netdev_priv(net); + struct asix_data *data = (struct asix_data *)&dev->data; + /* Inherit standard device info */ usbnet_get_drvinfo(net, info); - info->eedump_len = 0x3e; + strncpy (info->driver, driver_name, sizeof info->driver); + strncpy (info->version, DRIVER_VERSION, sizeof info->version); + info->eedump_len = data->eeprom_len; } static int asix_get_settings(struct net_device *net, struct ethtool_cmd *cmd) @@ -468,8 +710,34 @@ static int asix_get_settings(struct net_device *net, struct ethtool_cmd *cmd) static int asix_set_settings(struct net_device *net, struct ethtool_cmd *cmd) { struct usbnet *dev = netdev_priv(net); + int res = mii_ethtool_sset(&dev->mii,cmd); + + /* link speed/duplex might have changed */ + if (dev->driver_info->link_reset) + dev->driver_info->link_reset(dev); + + return res; +} + +static int asix_nway_reset(struct net_device *net) +{ + struct usbnet *dev = netdev_priv(net); + + return mii_nway_restart(&dev->mii); +} + +static u32 asix_get_link(struct net_device *net) +{ + struct usbnet *dev = netdev_priv(net); - return mii_ethtool_sset(&dev->mii,cmd); + return mii_link_ok(&dev->mii); +} + +static int asix_ioctl (struct net_device *net, struct ifreq *rq, int cmd) +{ + struct usbnet *dev = netdev_priv(net); + + return generic_mii_ioctl(&dev->mii, if_mii(rq), cmd, NULL); } /* We need to override some ethtool_ops so we require our @@ -477,7 +745,8 @@ static int asix_set_settings(struct net_device *net, struct ethtool_cmd *cmd) devices that may be connected at the same time. */ static struct ethtool_ops ax88172_ethtool_ops = { .get_drvinfo = asix_get_drvinfo, - .get_link = ethtool_op_get_link, + .get_link = asix_get_link, + .nway_reset = asix_nway_reset, .get_msglevel = usbnet_get_msglevel, .set_msglevel = usbnet_set_msglevel, .get_wol = asix_get_wol, @@ -488,11 +757,66 @@ static struct ethtool_ops ax88172_ethtool_ops = { .set_settings = asix_set_settings, }; -static int asix_ioctl (struct net_device *net, struct ifreq *rq, int cmd) +static void ax88172_set_multicast(struct net_device *net) { struct usbnet *dev = netdev_priv(net); + struct asix_data *data = (struct asix_data *)&dev->data; + u8 rx_ctl = 0x8c; - return generic_mii_ioctl(&dev->mii, if_mii(rq), cmd, NULL); + if (net->flags & IFF_PROMISC) { + rx_ctl |= 0x01; + } else if (net->flags & IFF_ALLMULTI + || net->mc_count > AX_MAX_MCAST) { + rx_ctl |= 0x02; + } else if (net->mc_count == 0) { + /* just broadcast and directed */ + } else { + /* We use the 20 byte dev->data + * for our 8 byte filter buffer + * to avoid allocating memory that + * is tricky to free later */ + struct dev_mc_list *mc_list = net->mc_list; + u32 crc_bits; + int i; + + memset(data->multi_filter, 0, AX_MCAST_FILTER_SIZE); + + /* Build the multicast hash filter. */ + for (i = 0; i < net->mc_count; i++) { + crc_bits = + ether_crc(ETH_ALEN, + mc_list->dmi_addr) >> 26; + data->multi_filter[crc_bits >> 3] |= + 1 << (crc_bits & 7); + mc_list = mc_list->next; + } + + asix_write_cmd_async(dev, AX_CMD_WRITE_MULTI_FILTER, 0, 0, + AX_MCAST_FILTER_SIZE, data->multi_filter); + + rx_ctl |= 0x10; + } + + asix_write_cmd_async(dev, AX_CMD_WRITE_RX_CTL, rx_ctl, 0, 0, NULL); +} + +static int ax88172_link_reset(struct usbnet *dev) +{ + u8 mode; + struct ethtool_cmd ecmd; + + mii_check_media(&dev->mii, 1, 1); + mii_ethtool_gset(&dev->mii, &ecmd); + mode = AX88172_MEDIUM_DEFAULT; + + if (ecmd.duplex != DUPLEX_FULL) + mode |= ~AX88172_MEDIUM_FD; + + devdbg(dev, "ax88172_link_reset() speed: %d duplex: %d setting mode to 0x%04x", ecmd.speed, ecmd.duplex, mode); + + asix_write_medium_mode(dev, mode); + + return 0; } static int ax88172_bind(struct usbnet *dev, struct usb_interface *intf) @@ -501,6 +825,9 @@ static int ax88172_bind(struct usbnet *dev, struct usb_interface *intf) void *buf; int i; unsigned long gpio_bits = dev->driver_info->data; + struct asix_data *data = (struct asix_data *)&dev->data; + + data->eeprom_len = AX88172_EEPROM_LEN; usbnet_get_endpoints(dev,intf); @@ -519,12 +846,12 @@ static int ax88172_bind(struct usbnet *dev, struct usb_interface *intf) msleep(5); } - if ((ret = asix_write_rx_ctl(dev,0x80)) < 0) + if ((ret = asix_write_rx_ctl(dev, 0x80)) < 0) goto out2; /* Get the MAC address */ memset(buf, 0, ETH_ALEN); - if ((ret = asix_read_cmd(dev, AX_CMD_READ_NODE_ID, + if ((ret = asix_read_cmd(dev, AX88172_CMD_READ_NODE_ID, 0, 0, 6, buf)) < 0) { dbg("read AX_CMD_READ_NODE_ID failed: %d", ret); goto out2; @@ -537,14 +864,14 @@ static int ax88172_bind(struct usbnet *dev, struct usb_interface *intf) dev->mii.mdio_write = asix_mdio_write; dev->mii.phy_id_mask = 0x3f; dev->mii.reg_num_mask = 0x1f; - dev->mii.phy_id = asix_get_phyid(dev); + dev->mii.phy_id = asix_get_phy_addr(dev); dev->net->do_ioctl = asix_ioctl; - dev->net->set_multicast_list = asix_set_multicast; + dev->net->set_multicast_list = ax88172_set_multicast; dev->net->ethtool_ops = &ax88172_ethtool_ops; - asix_mdio_write_le(dev->net, dev->mii.phy_id, MII_BMCR, BMCR_RESET); - asix_mdio_write_le(dev->net, dev->mii.phy_id, MII_ADVERTISE, + asix_mdio_write(dev->net, dev->mii.phy_id, MII_BMCR, BMCR_RESET); + asix_mdio_write(dev->net, dev->mii.phy_id, MII_ADVERTISE, ADVERTISE_ALL | ADVERTISE_CSMA | ADVERTISE_PAUSE_CAP); mii_nway_restart(&dev->mii); @@ -557,7 +884,8 @@ out1: static struct ethtool_ops ax88772_ethtool_ops = { .get_drvinfo = asix_get_drvinfo, - .get_link = ethtool_op_get_link, + .get_link = asix_get_link, + .nway_reset = asix_nway_reset, .get_msglevel = usbnet_get_msglevel, .set_msglevel = usbnet_set_msglevel, .get_wol = asix_get_wol, @@ -568,10 +896,37 @@ static struct ethtool_ops ax88772_ethtool_ops = { .set_settings = asix_set_settings, }; +static int ax88772_link_reset(struct usbnet *dev) +{ + u16 mode; + struct ethtool_cmd ecmd; + + mii_check_media(&dev->mii, 1, 1); + mii_ethtool_gset(&dev->mii, &ecmd); + mode = AX88772_MEDIUM_DEFAULT; + + if (ecmd.speed != SPEED_100) + mode &= ~AX_MEDIUM_PS; + + if (ecmd.duplex != DUPLEX_FULL) + mode &= ~AX_MEDIUM_FD; + + devdbg(dev, "ax88772_link_reset() speed: %d duplex: %d setting mode to 0x%04x", ecmd.speed, ecmd.duplex, mode); + + asix_write_medium_mode(dev, mode); + + return 0; +} + static int ax88772_bind(struct usbnet *dev, struct usb_interface *intf) { int ret; void *buf; + u16 rx_ctl; + struct asix_data *data = (struct asix_data *)&dev->data; + u32 phyid; + + data->eeprom_len = AX88772_EEPROM_LEN; usbnet_get_endpoints(dev,intf); @@ -582,13 +937,12 @@ static int ax88772_bind(struct usbnet *dev, struct usb_interface *intf) goto out1; } - if ((ret = asix_write_cmd(dev, AX_CMD_WRITE_GPIOS, - 0x00B0, 0, 0, buf)) < 0) + if ((ret = asix_write_gpio(dev, + AX_GPIO_RSE | AX_GPIO_GPO_2 | AX_GPIO_GPO2EN, 5)) < 0) goto out2; - msleep(5); if ((ret = asix_write_cmd(dev, AX_CMD_SW_PHY_SELECT, - 0x0001, 0, 0, buf)) < 0) { + 0x0000, 0, 0, buf)) < 0) { dbg("Select PHY #1 failed: %d", ret); goto out2; } @@ -605,36 +959,34 @@ static int ax88772_bind(struct usbnet *dev, struct usb_interface *intf) goto out2; msleep(150); - if ((ret = asix_write_rx_ctl(dev, 0x00)) < 0) + rx_ctl = asix_read_rx_ctl(dev); + dbg("RX_CTL is 0x%04x after software reset", rx_ctl); + if ((ret = asix_write_rx_ctl(dev, 0x0000)) < 0) goto out2; + rx_ctl = asix_read_rx_ctl(dev); + dbg("RX_CTL is 0x%04x setting to 0x0000", rx_ctl); + /* Get the MAC address */ memset(buf, 0, ETH_ALEN); - if ((ret = asix_read_cmd(dev, AX88772_CMD_READ_NODE_ID, + if ((ret = asix_read_cmd(dev, AX_CMD_READ_NODE_ID, 0, 0, ETH_ALEN, buf)) < 0) { dbg("Failed to read MAC address: %d", ret); goto out2; } memcpy(dev->net->dev_addr, buf, ETH_ALEN); - if ((ret = asix_set_sw_mii(dev)) < 0) - goto out2; - - if (((ret = asix_read_cmd(dev, AX_CMD_READ_MII_REG, - 0x0010, 2, 2, buf)) < 0) - || (*((u16 *)buf) != 0x003b)) { - dbg("Read PHY register 2 must be 0x3b00: %d", ret); - goto out2; - } - /* Initialize MII structure */ dev->mii.dev = dev->net; dev->mii.mdio_read = asix_mdio_read; dev->mii.mdio_write = asix_mdio_write; - dev->mii.phy_id_mask = 0xff; - dev->mii.reg_num_mask = 0xff; + dev->mii.phy_id_mask = 0x1f; + dev->mii.reg_num_mask = 0x1f; dev->net->do_ioctl = asix_ioctl; - dev->mii.phy_id = asix_get_phyid(dev); + dev->mii.phy_id = asix_get_phy_addr(dev); + + phyid = asix_get_phyid(dev); + dbg("PHYID=0x%08x", phyid); if ((ret = asix_sw_reset(dev, AX_SWRESET_PRL)) < 0) goto out2; @@ -649,16 +1001,13 @@ static int ax88772_bind(struct usbnet *dev, struct usb_interface *intf) dev->net->set_multicast_list = asix_set_multicast; dev->net->ethtool_ops = &ax88772_ethtool_ops; - asix_mdio_write_le(dev->net, dev->mii.phy_id, MII_BMCR, BMCR_RESET); - asix_mdio_write_le(dev->net, dev->mii.phy_id, MII_ADVERTISE, + asix_mdio_write(dev->net, dev->mii.phy_id, MII_BMCR, BMCR_RESET); + asix_mdio_write(dev->net, dev->mii.phy_id, MII_ADVERTISE, ADVERTISE_ALL | ADVERTISE_CSMA); mii_nway_restart(&dev->mii); - if ((ret = asix_write_cmd(dev, AX_CMD_WRITE_MEDIUM_MODE, - AX88772_MEDIUM_DEFAULT, 0, 0, buf)) < 0) { - dbg("Write medium mode register: %d", ret); + if ((ret = asix_write_medium_mode(dev, AX88772_MEDIUM_DEFAULT)) < 0) goto out2; - } if ((ret = asix_write_cmd(dev, AX_CMD_WRITE_IPG0, AX88772_IPG0_DEFAULT | AX88772_IPG1_DEFAULT, @@ -666,13 +1015,17 @@ static int ax88772_bind(struct usbnet *dev, struct usb_interface *intf) dbg("Write IPG,IPG1,IPG2 failed: %d", ret); goto out2; } - if ((ret = asix_set_hw_mii(dev)) < 0) - goto out2; /* Set RX_CTL to default values with 2k buffer, and enable cactus */ - if ((ret = asix_write_rx_ctl(dev, 0x0088)) < 0) + if ((ret = asix_write_rx_ctl(dev, AX_DEFAULT_RX_CTL)) < 0) goto out2; + rx_ctl = asix_read_rx_ctl(dev); + dbg("RX_CTL is 0x%04x after all initializations", rx_ctl); + + rx_ctl = asix_read_medium_status(dev); + dbg("Medium Status is 0x%04x after all initializations", rx_ctl); + kfree(buf); /* Asix framing packs multiple eth frames into a 2K usb bulk transfer */ @@ -690,120 +1043,285 @@ out1: return ret; } -static int ax88772_rx_fixup(struct usbnet *dev, struct sk_buff *skb) +static struct ethtool_ops ax88178_ethtool_ops = { + .get_drvinfo = asix_get_drvinfo, + .get_link = asix_get_link, + .nway_reset = asix_nway_reset, + .get_msglevel = usbnet_get_msglevel, + .set_msglevel = usbnet_set_msglevel, + .get_wol = asix_get_wol, + .set_wol = asix_set_wol, + .get_eeprom_len = asix_get_eeprom_len, + .get_eeprom = asix_get_eeprom, + .get_settings = asix_get_settings, + .set_settings = asix_set_settings, +}; + +static int marvell_phy_init(struct usbnet *dev) { - u8 *head; - u32 header; - char *packet; - struct sk_buff *ax_skb; - u16 size; + struct asix_data *data = (struct asix_data *)&dev->data; + u16 reg; - head = (u8 *) skb->data; - memcpy(&header, head, sizeof(header)); - le32_to_cpus(&header); - packet = head + sizeof(header); + devdbg(dev,"marvell_phy_init()"); - skb_pull(skb, 4); + reg = asix_mdio_read(dev->net, dev->mii.phy_id, MII_MARVELL_STATUS); + devdbg(dev,"MII_MARVELL_STATUS = 0x%04x", reg); - while (skb->len > 0) { - if ((short)(header & 0x0000ffff) != - ~((short)((header & 0xffff0000) >> 16))) { - devdbg(dev,"header length data is error"); - } - /* get the packet length */ - size = (u16) (header & 0x0000ffff); + asix_mdio_write(dev->net, dev->mii.phy_id, MII_MARVELL_CTRL, + MARVELL_CTRL_RXDELAY | MARVELL_CTRL_TXDELAY); - if ((skb->len) - ((size + 1) & 0xfffe) == 0) - return 2; - if (size > ETH_FRAME_LEN) { - devdbg(dev,"invalid rx length %d", size); - return 0; - } - ax_skb = skb_clone(skb, GFP_ATOMIC); - if (ax_skb) { - ax_skb->len = size; - ax_skb->data = packet; - ax_skb->tail = packet + size; - usbnet_skb_return(dev, ax_skb); - } else { - return 0; - } + if (data->ledmode) { + reg = asix_mdio_read(dev->net, dev->mii.phy_id, + MII_MARVELL_LED_CTRL); + devdbg(dev,"MII_MARVELL_LED_CTRL (1) = 0x%04x", reg); - skb_pull(skb, (size + 1) & 0xfffe); + reg &= 0xf8ff; + reg |= (1 + 0x0100); + asix_mdio_write(dev->net, dev->mii.phy_id, + MII_MARVELL_LED_CTRL, reg); - if (skb->len == 0) - break; + reg = asix_mdio_read(dev->net, dev->mii.phy_id, + MII_MARVELL_LED_CTRL); + devdbg(dev,"MII_MARVELL_LED_CTRL (2) = 0x%04x", reg); + reg &= 0xfc0f; + } - head = (u8 *) skb->data; - memcpy(&header, head, sizeof(header)); - le32_to_cpus(&header); - packet = head + sizeof(header); - skb_pull(skb, 4); + return 0; +} + +static int marvell_led_status(struct usbnet *dev, u16 speed) +{ + u16 reg = asix_mdio_read(dev->net, dev->mii.phy_id, MARVELL_LED_MANUAL); + + devdbg(dev, "marvell_led_status() read 0x%04x", reg); + + /* Clear out the center LED bits - 0x03F0 */ + reg &= 0xfc0f; + + switch (speed) { + case SPEED_1000: + reg |= 0x03e0; + break; + case SPEED_100: + reg |= 0x03b0; + break; + default: + reg |= 0x02f0; } - if (skb->len < 0) { - devdbg(dev,"invalid rx length %d", skb->len); - return 0; + devdbg(dev, "marvell_led_status() writing 0x%04x", reg); + asix_mdio_write(dev->net, dev->mii.phy_id, MARVELL_LED_MANUAL, reg); + + return 0; +} + +static int ax88178_link_reset(struct usbnet *dev) +{ + u16 mode; + struct ethtool_cmd ecmd; + struct asix_data *data = (struct asix_data *)&dev->data; + + devdbg(dev,"ax88178_link_reset()"); + + mii_check_media(&dev->mii, 1, 1); + mii_ethtool_gset(&dev->mii, &ecmd); + mode = AX88178_MEDIUM_DEFAULT; + + if (ecmd.speed == SPEED_1000) + mode |= AX_MEDIUM_GM | AX_MEDIUM_ENCK; + else if (ecmd.speed == SPEED_100) + mode |= AX_MEDIUM_PS; + else + mode &= ~(AX_MEDIUM_PS | AX_MEDIUM_GM); + + if (ecmd.duplex == DUPLEX_FULL) + mode |= AX_MEDIUM_FD; + else + mode &= ~AX_MEDIUM_FD; + + devdbg(dev, "ax88178_link_reset() speed: %d duplex: %d setting mode to 0x%04x", ecmd.speed, ecmd.duplex, mode); + + asix_write_medium_mode(dev, mode); + + if (data->phymode == PHY_MODE_MARVELL && data->ledmode) + marvell_led_status(dev, ecmd.speed); + + return 0; +} + +static void ax88178_set_mfb(struct usbnet *dev) +{ + u16 mfb = AX_RX_CTL_MFB_16384; + u16 rxctl; + u16 medium; + int old_rx_urb_size = dev->rx_urb_size; + + if (dev->hard_mtu < 2048) { + dev->rx_urb_size = 2048; + mfb = AX_RX_CTL_MFB_2048; + } else if (dev->hard_mtu < 4096) { + dev->rx_urb_size = 4096; + mfb = AX_RX_CTL_MFB_4096; + } else if (dev->hard_mtu < 8192) { + dev->rx_urb_size = 8192; + mfb = AX_RX_CTL_MFB_8192; + } else if (dev->hard_mtu < 16384) { + dev->rx_urb_size = 16384; + mfb = AX_RX_CTL_MFB_16384; } - return 1; + + rxctl = asix_read_rx_ctl(dev); + asix_write_rx_ctl(dev, (rxctl & ~AX_RX_CTL_MFB_16384) | mfb); + + medium = asix_read_medium_status(dev); + if (dev->net->mtu > 1500) + medium |= AX_MEDIUM_JFE; + else + medium &= ~AX_MEDIUM_JFE; + asix_write_medium_mode(dev, medium); + + if (dev->rx_urb_size > old_rx_urb_size) + usbnet_unlink_rx_urbs(dev); } -static struct sk_buff *ax88772_tx_fixup(struct usbnet *dev, struct sk_buff *skb, - gfp_t flags) +static int ax88178_change_mtu(struct net_device *net, int new_mtu) { - int padlen; - int headroom = skb_headroom(skb); - int tailroom = skb_tailroom(skb); - u32 packet_len; - u32 padbytes = 0xffff0000; + struct usbnet *dev = netdev_priv(net); + int ll_mtu = new_mtu + net->hard_header_len + 4; - padlen = ((skb->len + 4) % 512) ? 0 : 4; + devdbg(dev, "ax88178_change_mtu() new_mtu=%d", new_mtu); - if ((!skb_cloned(skb)) - && ((headroom + tailroom) >= (4 + padlen))) { - if ((headroom < 4) || (tailroom < padlen)) { - skb->data = memmove(skb->head + 4, skb->data, skb->len); - skb->tail = skb->data + skb->len; - } + if (new_mtu <= 0 || ll_mtu > 16384) + return -EINVAL; + + if ((ll_mtu % dev->maxpacket) == 0) + return -EDOM; + + net->mtu = new_mtu; + dev->hard_mtu = net->mtu + net->hard_header_len; + ax88178_set_mfb(dev); + + return 0; +} + +static int ax88178_bind(struct usbnet *dev, struct usb_interface *intf) +{ + struct asix_data *data = (struct asix_data *)&dev->data; + int ret; + void *buf; + u16 eeprom; + int gpio0 = 0; + u32 phyid; + + usbnet_get_endpoints(dev,intf); + + buf = kmalloc(6, GFP_KERNEL); + if(!buf) { + dbg ("Cannot allocate memory for buffer"); + ret = -ENOMEM; + goto out1; + } + + eeprom = 0; + asix_read_cmd(dev, AX_CMD_READ_GPIOS, 0, 0, 1, &eeprom); + dbg("GPIO Status: 0x%04x", eeprom); + + asix_write_cmd(dev, AX_CMD_WRITE_ENABLE, 0, 0, 0, NULL); + asix_read_cmd(dev, AX_CMD_READ_EEPROM, 0x0017, 0, 2, &eeprom); + asix_write_cmd(dev, AX_CMD_WRITE_DISABLE, 0, 0, 0, NULL); + + dbg("EEPROM index 0x17 is 0x%04x", eeprom); + + if (eeprom == 0xffff) { + data->phymode = PHY_MODE_MARVELL; + data->ledmode = 0; + gpio0 = 1; } else { - struct sk_buff *skb2; - skb2 = skb_copy_expand(skb, 4, padlen, flags); - dev_kfree_skb_any(skb); - skb = skb2; - if (!skb) - return NULL; + data->phymode = eeprom & 7; + data->ledmode = eeprom >> 8; + gpio0 = (eeprom & 0x80) ? 0 : 1; } + dbg("GPIO0: %d, PhyMode: %d", gpio0, data->phymode); - skb_push(skb, 4); - packet_len = (((skb->len - 4) ^ 0x0000ffff) << 16) + (skb->len - 4); - memcpy(skb->data, &packet_len, sizeof(packet_len)); + asix_write_gpio(dev, AX_GPIO_RSE | AX_GPIO_GPO_1 | AX_GPIO_GPO1EN, 40); + if ((eeprom >> 8) != 1) { + asix_write_gpio(dev, 0x003c, 30); + asix_write_gpio(dev, 0x001c, 300); + asix_write_gpio(dev, 0x003c, 30); + } else { + dbg("gpio phymode == 1 path"); + asix_write_gpio(dev, AX_GPIO_GPO1EN, 30); + asix_write_gpio(dev, AX_GPIO_GPO1EN | AX_GPIO_GPO_1, 30); + } - if ((skb->len % 512) == 0) { - memcpy( skb->tail, &padbytes, sizeof(padbytes)); - skb_put(skb, sizeof(padbytes)); + asix_sw_reset(dev, 0); + msleep(150); + + asix_sw_reset(dev, AX_SWRESET_PRL | AX_SWRESET_IPPD); + msleep(150); + + asix_write_rx_ctl(dev, 0); + + /* Get the MAC address */ + memset(buf, 0, ETH_ALEN); + if ((ret = asix_read_cmd(dev, AX_CMD_READ_NODE_ID, + 0, 0, ETH_ALEN, buf)) < 0) { + dbg("Failed to read MAC address: %d", ret); + goto out2; } - return skb; -} + memcpy(dev->net->dev_addr, buf, ETH_ALEN); -static int ax88772_link_reset(struct usbnet *dev) -{ - u16 lpa; - u16 adv; - u16 res; - u16 mode; + /* Initialize MII structure */ + dev->mii.dev = dev->net; + dev->mii.mdio_read = asix_mdio_read; + dev->mii.mdio_write = asix_mdio_write; + dev->mii.phy_id_mask = 0x1f; + dev->mii.reg_num_mask = 0xff; + dev->mii.supports_gmii = 1; + dev->net->do_ioctl = asix_ioctl; + dev->mii.phy_id = asix_get_phy_addr(dev); + dev->net->set_multicast_list = asix_set_multicast; + dev->net->ethtool_ops = &ax88178_ethtool_ops; + dev->net->change_mtu = &ax88178_change_mtu; - mode = AX88772_MEDIUM_DEFAULT; - lpa = asix_mdio_read_le(dev->net, dev->mii.phy_id, MII_LPA); - adv = asix_mdio_read_le(dev->net, dev->mii.phy_id, MII_ADVERTISE); - res = mii_nway_result(lpa|adv); + phyid = asix_get_phyid(dev); + dbg("PHYID=0x%08x", phyid); + + if (data->phymode == PHY_MODE_MARVELL) { + marvell_phy_init(dev); + msleep(60); + } + + asix_mdio_write(dev->net, dev->mii.phy_id, MII_BMCR, + BMCR_RESET | BMCR_ANENABLE); + asix_mdio_write(dev->net, dev->mii.phy_id, MII_ADVERTISE, + ADVERTISE_ALL | ADVERTISE_CSMA | ADVERTISE_PAUSE_CAP); + asix_mdio_write(dev->net, dev->mii.phy_id, MII_CTRL1000, + ADVERTISE_1000FULL); + + mii_nway_restart(&dev->mii); - if ((res & LPA_DUPLEX) == 0) - mode &= ~AX88772_MEDIUM_FULL_DUPLEX; - if ((res & LPA_100) == 0) - mode &= ~AX88772_MEDIUM_100MB; - asix_write_cmd(dev, AX_CMD_WRITE_MEDIUM_MODE, mode, 0, 0, NULL); + if ((ret = asix_write_medium_mode(dev, AX88178_MEDIUM_DEFAULT)) < 0) + goto out2; + + if ((ret = asix_write_rx_ctl(dev, AX_DEFAULT_RX_CTL)) < 0) + goto out2; + + kfree(buf); + + /* Asix framing packs multiple eth frames into a 2K usb bulk transfer */ + if (dev->driver_info->flags & FLAG_FRAMING_AX) { + /* hard_mtu is still the default - the device does not support + jumbo eth frames */ + dev->rx_urb_size = 2048; + } return 0; + +out2: + kfree(buf); +out1: + return ret; } static const struct driver_info ax8817x_info = { @@ -853,8 +1371,19 @@ static const struct driver_info ax88772_info = { .link_reset = ax88772_link_reset, .reset = ax88772_link_reset, .flags = FLAG_ETHER | FLAG_FRAMING_AX, - .rx_fixup = ax88772_rx_fixup, - .tx_fixup = ax88772_tx_fixup, + .rx_fixup = asix_rx_fixup, + .tx_fixup = asix_tx_fixup, +}; + +static const struct driver_info ax88178_info = { + .description = "ASIX AX88178 USB 2.0 Ethernet", + .bind = ax88178_bind, + .status = asix_status, + .link_reset = ax88178_link_reset, + .reset = ax88178_link_reset, + .flags = FLAG_ETHER | FLAG_FRAMING_AX, + .rx_fixup = asix_rx_fixup, + .tx_fixup = asix_tx_fixup, }; static const struct usb_device_id products [] = { @@ -913,7 +1442,7 @@ static const struct usb_device_id products [] = { }, { // ASIX AX88178 10/100/1000 USB_DEVICE (0x0b95, 0x1780), - .driver_info = (unsigned long) &ax88772_info, + .driver_info = (unsigned long) &ax88178_info, }, { // Linksys USB200M Rev 2 USB_DEVICE (0x13b1, 0x0018), @@ -922,6 +1451,14 @@ static const struct usb_device_id products [] = { // 0Q0 cable ethernet USB_DEVICE (0x1557, 0x7720), .driver_info = (unsigned long) &ax88772_info, +}, { + // DLink DUB-E100 H/W Ver B1 + USB_DEVICE (0x07d1, 0x3c05), + .driver_info = (unsigned long) &ax88772_info, +}, { + // Linksys USB1000 + USB_DEVICE (0x1737, 0x0039), + .driver_info = (unsigned long) &ax88178_info, }, { }, // END }; diff --git a/drivers/usb/net/net1080.c b/drivers/usb/net/net1080.c index a9b6eeac3e3..301baa72bac 100644 --- a/drivers/usb/net/net1080.c +++ b/drivers/usb/net/net1080.c @@ -498,25 +498,24 @@ static int net1080_rx_fixup(struct usbnet *dev, struct sk_buff *skb) static struct sk_buff * net1080_tx_fixup(struct usbnet *dev, struct sk_buff *skb, gfp_t flags) { - int padlen; struct sk_buff *skb2; struct nc_header *header = NULL; struct nc_trailer *trailer = NULL; + int padlen = sizeof (struct nc_trailer); int len = skb->len; - padlen = ((len + sizeof (struct nc_header) - + sizeof (struct nc_trailer)) & 0x01) ? 0 : 1; + if (!((len + padlen + sizeof (struct nc_header)) & 0x01)) + padlen++; if (!skb_cloned(skb)) { int headroom = skb_headroom(skb); int tailroom = skb_tailroom(skb); - if ((padlen + sizeof (struct nc_trailer)) <= tailroom - && sizeof (struct nc_header) <= headroom) + if (padlen <= tailroom && + sizeof(struct nc_header) <= headroom) /* There's enough head and tail room */ goto encapsulate; - if ((sizeof (struct nc_header) + padlen - + sizeof (struct nc_trailer)) < + if ((sizeof (struct nc_header) + padlen) < (headroom + tailroom)) { /* There's enough total room, so just readjust */ skb->data = memmove(skb->head @@ -530,7 +529,7 @@ net1080_tx_fixup(struct usbnet *dev, struct sk_buff *skb, gfp_t flags) /* Create a new skb to use with the correct size */ skb2 = skb_copy_expand(skb, sizeof (struct nc_header), - sizeof (struct nc_trailer) + padlen, + padlen, flags); dev_kfree_skb_any(skb); if (!skb2) diff --git a/drivers/usb/net/pegasus.c b/drivers/usb/net/pegasus.c index ab21f960d25..b8e25af13f0 100644 --- a/drivers/usb/net/pegasus.c +++ b/drivers/usb/net/pegasus.c @@ -619,7 +619,7 @@ static void read_bulk_callback(struct urb *urb, struct pt_regs *regs) switch (urb->status) { case 0: break; - case -ETIMEDOUT: + case -ETIME: if (netif_msg_rx_err(pegasus)) pr_debug("%s: reset MAC\n", net->name); pegasus->flags &= ~PEGASUS_RX_BUSY; diff --git a/drivers/usb/net/rtl8150.c b/drivers/usb/net/rtl8150.c index a72685b9606..2364c209938 100644 --- a/drivers/usb/net/rtl8150.c +++ b/drivers/usb/net/rtl8150.c @@ -438,7 +438,7 @@ static void read_bulk_callback(struct urb *urb, struct pt_regs *regs) break; case -ENOENT: return; /* the urb is in unlink state */ - case -ETIMEDOUT: + case -ETIME: warn("may be reset is needed?.."); goto goon; default: diff --git a/drivers/usb/net/usbnet.c b/drivers/usb/net/usbnet.c index 54183e173a6..98a522f1e26 100644 --- a/drivers/usb/net/usbnet.c +++ b/drivers/usb/net/usbnet.c @@ -61,8 +61,11 @@ * let the USB host controller be busy for 5msec or more before an irq * is required, under load. Jumbograms change the equation. */ -#define RX_QLEN(dev) (((dev)->udev->speed == USB_SPEED_HIGH) ? 60 : 4) -#define TX_QLEN(dev) (((dev)->udev->speed == USB_SPEED_HIGH) ? 60 : 4) +#define RX_MAX_QUEUE_MEMORY (60 * 1518) +#define RX_QLEN(dev) (((dev)->udev->speed == USB_SPEED_HIGH) ? \ + (RX_MAX_QUEUE_MEMORY/(dev)->rx_urb_size) : 4) +#define TX_QLEN(dev) (((dev)->udev->speed == USB_SPEED_HIGH) ? \ + (RX_MAX_QUEUE_MEMORY/(dev)->hard_mtu) : 4) // reawaken network queue this soon after stopping; else watchdog barks #define TX_TIMEOUT_JIFFIES (5*HZ) @@ -227,13 +230,23 @@ static int usbnet_change_mtu (struct net_device *net, int new_mtu) { struct usbnet *dev = netdev_priv(net); int ll_mtu = new_mtu + net->hard_header_len; + int old_hard_mtu = dev->hard_mtu; + int old_rx_urb_size = dev->rx_urb_size; - if (new_mtu <= 0 || ll_mtu > dev->hard_mtu) + if (new_mtu <= 0) return -EINVAL; // no second zero-length packet read wanted after mtu-sized packets if ((ll_mtu % dev->maxpacket) == 0) return -EDOM; net->mtu = new_mtu; + + dev->hard_mtu = net->mtu + net->hard_header_len; + if (dev->rx_urb_size == old_hard_mtu) { + dev->rx_urb_size = dev->hard_mtu; + if (dev->rx_urb_size > old_rx_urb_size) + usbnet_unlink_rx_urbs(dev); + } + return 0; } @@ -412,9 +425,9 @@ static void rx_complete (struct urb *urb, struct pt_regs *regs) // we get controller i/o faults during khubd disconnect() delays. // throttle down resubmits, to avoid log floods; just temporarily, // so we still recover when the fault isn't a khubd delay. - case -EPROTO: // ehci - case -ETIMEDOUT: // ohci - case -EILSEQ: // uhci + case -EPROTO: + case -ETIME: + case -EILSEQ: dev->stats.rx_errors++; if (!timer_pending (&dev->delay)) { mod_timer (&dev->delay, jiffies + THROTTLE_JIFFIES); @@ -521,6 +534,17 @@ static int unlink_urbs (struct usbnet *dev, struct sk_buff_head *q) return count; } +// Flush all pending rx urbs +// minidrivers may need to do this when the MTU changes + +void usbnet_unlink_rx_urbs(struct usbnet *dev) +{ + if (netif_running(dev->net)) { + (void) unlink_urbs (dev, &dev->rxq); + tasklet_schedule(&dev->bh); + } +} +EXPORT_SYMBOL_GPL(usbnet_unlink_rx_urbs); /*-------------------------------------------------------------------------*/ @@ -629,7 +653,7 @@ static int usbnet_open (struct net_device *net) devinfo (dev, "open: enable queueing " "(rx %d, tx %d) mtu %d %s framing", - RX_QLEN (dev), TX_QLEN (dev), dev->net->mtu, + (int)RX_QLEN (dev), (int)TX_QLEN (dev), dev->net->mtu, framing); } @@ -797,9 +821,9 @@ static void tx_complete (struct urb *urb, struct pt_regs *regs) // like rx, tx gets controller i/o faults during khubd delays // and so it uses the same throttling mechanism. - case -EPROTO: // ehci - case -ETIMEDOUT: // ohci - case -EILSEQ: // uhci + case -EPROTO: + case -ETIME: + case -EILSEQ: if (!timer_pending (&dev->delay)) { mod_timer (&dev->delay, jiffies + THROTTLE_JIFFIES); diff --git a/drivers/usb/net/usbnet.h b/drivers/usb/net/usbnet.h index 89fc4958eec..c0746f0454a 100644 --- a/drivers/usb/net/usbnet.h +++ b/drivers/usb/net/usbnet.h @@ -166,6 +166,7 @@ struct skb_data { /* skb->cb is one of these */ extern int usbnet_get_endpoints(struct usbnet *, struct usb_interface *); extern void usbnet_defer_kevent (struct usbnet *, int); extern void usbnet_skb_return (struct usbnet *, struct sk_buff *); +extern void usbnet_unlink_rx_urbs(struct usbnet *); extern u32 usbnet_get_msglevel (struct net_device *); extern void usbnet_set_msglevel (struct net_device *, u32); diff --git a/drivers/usb/serial/Kconfig b/drivers/usb/serial/Kconfig index f5b9438c94f..5076b9d9705 100644 --- a/drivers/usb/serial/Kconfig +++ b/drivers/usb/serial/Kconfig @@ -53,6 +53,15 @@ config USB_SERIAL_GENERIC support" be compiled as a module for this driver to be used properly. +config USB_SERIAL_AIRCABLE + tristate "AIRcable USB Bluetooth Dongle Driver (EXPERIMENTAL)" + depends on USB_SERIAL && EXPERIMENTAL + help + Say Y here if you want to use AIRcable USB Bluetoot Dongle. + + To compile this driver as a module, choose M here: the module + will be called aircable. + config USB_SERIAL_AIRPRIME tristate "USB AirPrime CDMA Wireless Driver" depends on USB_SERIAL @@ -413,6 +422,21 @@ config USB_SERIAL_MCT_U232 To compile this driver as a module, choose M here: the module will be called mct_u232. +config USB_SERIAL_MOS7840 + tristate "USB Moschip 7840/7820 USB Serial Driver" + depends on USB_SERIAL + ---help--- + Say Y here if you want to use a MCS7840 Quad-Serial or MCS7820 + Dual-Serial port device from MosChip Semiconductor. + + The MCS7840 and MCS7820 have been developed to connect a wide range + of standard serial devices to a USB host. The MCS7840 has a USB + device controller connected to four (4) individual UARTs while the + MCS7820 controller connects to two (2) individual UARTs. + + To compile this driver as a module, choose M here: the + module will be called mos7840. If unsure, choose N. + config USB_SERIAL_NAVMAN tristate "USB Navman GPS device" depends on USB_SERIAL @@ -526,5 +550,6 @@ config USB_EZUSB depends on USB_SERIAL_KEYSPAN_PDA || USB_SERIAL_XIRCOM || USB_SERIAL_KEYSPAN || USB_SERIAL_WHITEHEAT default y + endmenu diff --git a/drivers/usb/serial/Makefile b/drivers/usb/serial/Makefile index 8efed2ce1ba..8dce83340e3 100644 --- a/drivers/usb/serial/Makefile +++ b/drivers/usb/serial/Makefile @@ -11,6 +11,7 @@ usbserial-obj-$(CONFIG_USB_EZUSB) += ezusb.o usbserial-objs := usb-serial.o generic.o bus.o $(usbserial-obj-y) +obj-$(CONFIG_USB_SERIAL_AIRCABLE) += aircable.o obj-$(CONFIG_USB_SERIAL_AIRPRIME) += airprime.o obj-$(CONFIG_USB_SERIAL_ARK3116) += ark3116.o obj-$(CONFIG_USB_SERIAL_BELKIN) += belkin_sa.o @@ -33,6 +34,7 @@ obj-$(CONFIG_USB_SERIAL_KEYSPAN_PDA) += keyspan_pda.o obj-$(CONFIG_USB_SERIAL_KLSI) += kl5kusb105.o obj-$(CONFIG_USB_SERIAL_KOBIL_SCT) += kobil_sct.o obj-$(CONFIG_USB_SERIAL_MCT_U232) += mct_u232.o +obj-$(CONFIG_USB_SERIAL_MOS7840) += mos7840.o obj-$(CONFIG_USB_SERIAL_NAVMAN) += navman.o obj-$(CONFIG_USB_SERIAL_OMNINET) += omninet.o obj-$(CONFIG_USB_SERIAL_OPTION) += option.o diff --git a/drivers/usb/serial/aircable.c b/drivers/usb/serial/aircable.c new file mode 100644 index 00000000000..2ccd9ded52a --- /dev/null +++ b/drivers/usb/serial/aircable.c @@ -0,0 +1,625 @@ +/* + * AIRcable USB Bluetooth Dongle Driver. + * + * Copyright (C) 2006 Manuel Francisco Naranjo (naranjo.manuel@gmail.com) + * This program is free software; you can redistribute it and/or modify it under + * the terms of the GNU General Public License version 2 as published by the + * Free Software Foundation. + * + * The device works as an standard CDC device, it has 2 interfaces, the first + * one is for firmware access and the second is the serial one. + * The protocol is very simply, there are two posibilities reading or writing. + * When writting the first urb must have a Header that starts with 0x20 0x29 the + * next two bytes must say how much data will be sended. + * When reading the process is almost equal except that the header starts with + * 0x00 0x20. + * + * The device simply need some stuff to understand data comming from the usb + * buffer: The First and Second byte is used for a Header, the Third and Fourth + * tells the device the amount of information the package holds. + * Packages are 60 bytes long Header Stuff. + * When writting to the device the first two bytes of the header are 0x20 0x29 + * When reading the bytes are 0x00 0x20, or 0x00 0x10, there is an strange + * situation, when too much data arrives to the device because it sends the data + * but with out the header. I will use a simply hack to override this situation, + * if there is data coming that does not contain any header, then that is data + * that must go directly to the tty, as there is no documentation about if there + * is any other control code, I will simply check for the first + * one. + * + * The driver registers himself with the USB-serial core and the USB Core. I had + * to implement a probe function agains USB-serial, because other way, the + * driver was attaching himself to both interfaces. I have tryed with different + * configurations of usb_serial_driver with out exit, only the probe function + * could handle this correctly. + * + * I have taken some info from a Greg Kroah-Hartman article: + * http://www.linuxjournal.com/article/6573 + * And from Linux Device Driver Kit CD, which is a great work, the authors taken + * the work to recompile lots of information an knowladge in drivers development + * and made it all avaible inside a cd. + * URL: http://kernel.org/pub/linux/kernel/people/gregkh/ddk/ + * + */ + +#include <linux/tty.h> +#include <linux/tty_flip.h> +#include <linux/circ_buf.h> +#include <linux/usb.h> +#include <linux/usb/serial.h> + +static int debug; + +/* Vendor and Product ID */ +#define AIRCABLE_VID 0x16CA +#define AIRCABLE_USB_PID 0x1502 + +/* write buffer size defines */ +#define AIRCABLE_BUF_SIZE 2048 + +/* Protocol Stuff */ +#define HCI_HEADER_LENGTH 0x4 +#define TX_HEADER_0 0x20 +#define TX_HEADER_1 0x29 +#define RX_HEADER_0 0x00 +#define RX_HEADER_1 0x20 +#define MAX_HCI_FRAMESIZE 60 +#define HCI_COMPLETE_FRAME 64 + +/* rx_flags */ +#define THROTTLED 0x01 +#define ACTUALLY_THROTTLED 0x02 + +/* + * Version Information + */ +#define DRIVER_VERSION "v1.0b2" +#define DRIVER_AUTHOR "Naranjo, Manuel Francisco <naranjo.manuel@gmail.com>" +#define DRIVER_DESC "AIRcable USB Driver" + +/* ID table that will be registered with USB core */ +static struct usb_device_id id_table [] = { + { USB_DEVICE(AIRCABLE_VID, AIRCABLE_USB_PID) }, + { }, +}; +MODULE_DEVICE_TABLE(usb, id_table); + + +/* Internal Structure */ +struct aircable_private { + spinlock_t rx_lock; /* spinlock for the receive lines */ + struct circ_buf *tx_buf; /* write buffer */ + struct circ_buf *rx_buf; /* read buffer */ + int rx_flags; /* for throttilng */ + struct work_struct rx_work; /* work cue for the receiving line */ +}; + +/* Private methods */ + +/* Circular Buffer Methods, code from ti_usb_3410_5052 used */ +/* + * serial_buf_clear + * + * Clear out all data in the circular buffer. + */ +static void serial_buf_clear(struct circ_buf *cb) +{ + cb->head = cb->tail = 0; +} + +/* + * serial_buf_alloc + * + * Allocate a circular buffer and all associated memory. + */ +static struct circ_buf *serial_buf_alloc(void) +{ + struct circ_buf *cb; + cb = kmalloc(sizeof(struct circ_buf), GFP_KERNEL); + if (cb == NULL) + return NULL; + cb->buf = kmalloc(AIRCABLE_BUF_SIZE, GFP_KERNEL); + if (cb->buf == NULL) { + kfree(cb); + return NULL; + } + serial_buf_clear(cb); + return cb; +} + +/* + * serial_buf_free + * + * Free the buffer and all associated memory. + */ +static void serial_buf_free(struct circ_buf *cb) +{ + kfree(cb->buf); + kfree(cb); +} + +/* + * serial_buf_data_avail + * + * Return the number of bytes of data available in the circular + * buffer. + */ +static int serial_buf_data_avail(struct circ_buf *cb) +{ + return CIRC_CNT(cb->head,cb->tail,AIRCABLE_BUF_SIZE); +} + +/* + * serial_buf_put + * + * Copy data data from a user buffer and put it into the circular buffer. + * Restrict to the amount of space available. + * + * Return the number of bytes copied. + */ +static int serial_buf_put(struct circ_buf *cb, const char *buf, int count) +{ + int c, ret = 0; + while (1) { + c = CIRC_SPACE_TO_END(cb->head, cb->tail, AIRCABLE_BUF_SIZE); + if (count < c) + c = count; + if (c <= 0) + break; + memcpy(cb->buf + cb->head, buf, c); + cb->head = (cb->head + c) & (AIRCABLE_BUF_SIZE-1); + buf += c; + count -= c; + ret= c; + } + return ret; +} + +/* + * serial_buf_get + * + * Get data from the circular buffer and copy to the given buffer. + * Restrict to the amount of data available. + * + * Return the number of bytes copied. + */ +static int serial_buf_get(struct circ_buf *cb, char *buf, int count) +{ + int c, ret = 0; + while (1) { + c = CIRC_CNT_TO_END(cb->head, cb->tail, AIRCABLE_BUF_SIZE); + if (count < c) + c = count; + if (c <= 0) + break; + memcpy(buf, cb->buf + cb->tail, c); + cb->tail = (cb->tail + c) & (AIRCABLE_BUF_SIZE-1); + buf += c; + count -= c; + ret= c; + } + return ret; +} + +/* End of circula buffer methods */ + +static void aircable_send(struct usb_serial_port *port) +{ + int count, result; + struct aircable_private *priv = usb_get_serial_port_data(port); + unsigned char* buf; + dbg("%s - port %d", __FUNCTION__, port->number); + if (port->write_urb_busy) + return; + + count = min(serial_buf_data_avail(priv->tx_buf), MAX_HCI_FRAMESIZE); + if (count == 0) + return; + + buf = kzalloc(count + HCI_HEADER_LENGTH, GFP_ATOMIC); + if (!buf) { + err("%s- kzalloc(%d) failed.", __FUNCTION__, + count + HCI_HEADER_LENGTH); + return; + } + + buf[0] = TX_HEADER_0; + buf[1] = TX_HEADER_1; + buf[2] = (unsigned char)count; + buf[3] = (unsigned char)(count >> 8); + serial_buf_get(priv->tx_buf,buf + HCI_HEADER_LENGTH, MAX_HCI_FRAMESIZE); + + memcpy(port->write_urb->transfer_buffer, buf, + count + HCI_HEADER_LENGTH); + + kfree(buf); + port->write_urb_busy = 1; + usb_serial_debug_data(debug, &port->dev, __FUNCTION__, + count + HCI_HEADER_LENGTH, + port->write_urb->transfer_buffer); + port->write_urb->transfer_buffer_length = count + HCI_HEADER_LENGTH; + port->write_urb->dev = port->serial->dev; + result = usb_submit_urb(port->write_urb, GFP_ATOMIC); + + if (result) { + dev_err(&port->dev, + "%s - failed submitting write urb, error %d\n", + __FUNCTION__, result); + port->write_urb_busy = 0; + } + + schedule_work(&port->work); +} + +static void aircable_read(void *params) +{ + struct usb_serial_port *port = params; + struct aircable_private *priv = usb_get_serial_port_data(port); + struct tty_struct *tty; + unsigned char *data; + int count; + if (priv->rx_flags & THROTTLED){ + if (priv->rx_flags & ACTUALLY_THROTTLED) + schedule_work(&priv->rx_work); + return; + } + + /* By now I will flush data to the tty in packages of no more than + * 64 bytes, to ensure I do not get throttled. + * Ask USB mailing list for better aproach. + */ + tty = port->tty; + + if (!tty) + schedule_work(&priv->rx_work); + + count = min(64, serial_buf_data_avail(priv->rx_buf)); + + if (count <= 0) + return; //We have finished sending everything. + + tty_prepare_flip_string(tty, &data, count); + if (!data){ + err("%s- kzalloc(%d) failed.", __FUNCTION__, count); + return; + } + + serial_buf_get(priv->rx_buf, data, count); + + tty_flip_buffer_push(tty); + + if (serial_buf_data_avail(priv->rx_buf)) + schedule_work(&priv->rx_work); + + return; +} +/* End of private methods */ + +static int aircable_probe(struct usb_serial *serial, + const struct usb_device_id *id) +{ + struct usb_host_interface *iface_desc = serial->interface->cur_altsetting; + struct usb_endpoint_descriptor *endpoint; + int num_bulk_out=0; + int i; + + for (i = 0; i < iface_desc->desc.bNumEndpoints; i++) { + endpoint = &iface_desc->endpoint[i].desc; + if (((endpoint->bEndpointAddress & 0x80) == 0x00) && + ((endpoint->bmAttributes & 3) == 0x02)) { + /* we found our bulk out endpoint */ + dbg("found bulk out on endpoint %d", i); + ++num_bulk_out; + } + } + + if (num_bulk_out == 0) { + dbg("Invalid interface, discarding"); + return -ENODEV; + } + + return 0; +} + +static int aircable_attach (struct usb_serial *serial) +{ + struct usb_serial_port *port = serial->port[0]; + struct aircable_private *priv; + + priv = kzalloc(sizeof(struct aircable_private), GFP_KERNEL); + if (!priv){ + err("%s- kmalloc(%Zd) failed.", __FUNCTION__, + sizeof(struct aircable_private)); + return -ENOMEM; + } + + /* Allocation of Circular Buffers */ + priv->tx_buf = serial_buf_alloc(); + if (priv->tx_buf == NULL) { + kfree(priv); + return -ENOMEM; + } + + priv->rx_buf = serial_buf_alloc(); + if (priv->rx_buf == NULL) { + kfree(priv->tx_buf); + kfree(priv); + return -ENOMEM; + } + + priv->rx_flags &= ~(THROTTLED | ACTUALLY_THROTTLED); + INIT_WORK(&priv->rx_work, aircable_read, port); + + usb_set_serial_port_data(serial->port[0], priv); + + return 0; +} + +static void aircable_shutdown(struct usb_serial *serial) +{ + + struct usb_serial_port *port = serial->port[0]; + struct aircable_private *priv = usb_get_serial_port_data(port); + + dbg("%s", __FUNCTION__); + + if (priv) { + serial_buf_free(priv->tx_buf); + serial_buf_free(priv->rx_buf); + usb_set_serial_port_data(port, NULL); + kfree(priv); + } +} + +static int aircable_write_room(struct usb_serial_port *port) +{ + struct aircable_private *priv = usb_get_serial_port_data(port); + return serial_buf_data_avail(priv->tx_buf); +} + +static int aircable_write(struct usb_serial_port *port, + const unsigned char *source, int count) +{ + struct aircable_private *priv = usb_get_serial_port_data(port); + int temp; + + dbg("%s - port %d, %d bytes", __FUNCTION__, port->number, count); + + usb_serial_debug_data(debug, &port->dev, __FUNCTION__, count, source); + + if (!count){ + dbg("%s - write request of 0 bytes", __FUNCTION__); + return count; + } + + temp = serial_buf_put(priv->tx_buf, source, count); + + aircable_send(port); + + if (count > AIRCABLE_BUF_SIZE) + count = AIRCABLE_BUF_SIZE; + + return count; + +} + +static void aircable_write_bulk_callback(struct urb *urb, struct pt_regs *regs) +{ + struct usb_serial_port *port = urb->context; + int result; + + dbg("%s - urb->status: %d", __FUNCTION__ , urb->status); + + /* This has been taken from cypress_m8.c cypress_write_int_callback */ + switch (urb->status) { + case 0: + /* success */ + break; + case -ECONNRESET: + case -ENOENT: + case -ESHUTDOWN: + /* this urb is terminated, clean up */ + dbg("%s - urb shutting down with status: %d", + __FUNCTION__, urb->status); + port->write_urb_busy = 0; + return; + default: + /* error in the urb, so we have to resubmit it */ + dbg("%s - Overflow in write", __FUNCTION__); + dbg("%s - nonzero write bulk status received: %d", + __FUNCTION__, urb->status); + port->write_urb->transfer_buffer_length = 1; + port->write_urb->dev = port->serial->dev; + result = usb_submit_urb(port->write_urb, GFP_KERNEL); + if (result) + dev_err(&urb->dev->dev, + "%s - failed resubmitting write urb, error %d\n", + __FUNCTION__, result); + else + return; + } + + port->write_urb_busy = 0; + + aircable_send(port); +} + +static void aircable_read_bulk_callback(struct urb *urb, struct pt_regs *regs) +{ + struct usb_serial_port *port = urb->context; + struct aircable_private *priv = usb_get_serial_port_data(port); + struct tty_struct *tty; + unsigned long no_packages, remaining, package_length, i; + int result, shift = 0; + unsigned char *temp; + + dbg("%s - port %d", __FUNCTION__, port->number); + + if (urb->status) { + dbg("%s - urb->status = %d", __FUNCTION__, urb->status); + if (!port->open_count) { + dbg("%s - port is closed, exiting.", __FUNCTION__); + return; + } + if (urb->status == -EPROTO) { + dbg("%s - caught -EPROTO, resubmitting the urb", + __FUNCTION__); + usb_fill_bulk_urb(port->read_urb, port->serial->dev, + usb_rcvbulkpipe(port->serial->dev, + port->bulk_in_endpointAddress), + port->read_urb->transfer_buffer, + port->read_urb->transfer_buffer_length, + aircable_read_bulk_callback, port); + + result = usb_submit_urb(urb, GFP_ATOMIC); + if (result) + dev_err(&urb->dev->dev, + "%s - failed resubmitting read urb, error %d\n", + __FUNCTION__, result); + return; + } + dbg("%s - unable to handle the error, exiting.", __FUNCTION__); + return; + } + + usb_serial_debug_data(debug, &port->dev, __FUNCTION__, + urb->actual_length,urb->transfer_buffer); + + tty = port->tty; + if (tty && urb->actual_length) { + if (urb->actual_length <= 2) { + /* This is an incomplete package */ + serial_buf_put(priv->rx_buf, urb->transfer_buffer, + urb->actual_length); + } else { + temp = urb->transfer_buffer; + if (temp[0] == RX_HEADER_0) + shift = HCI_HEADER_LENGTH; + + remaining = urb->actual_length; + no_packages = urb->actual_length / (HCI_COMPLETE_FRAME); + + if (urb->actual_length % HCI_COMPLETE_FRAME != 0) + no_packages+=1; + + for (i = 0; i < no_packages ;i++) { + if (remaining > (HCI_COMPLETE_FRAME)) + package_length = HCI_COMPLETE_FRAME; + else + package_length = remaining; + remaining -= package_length; + + serial_buf_put(priv->rx_buf, + urb->transfer_buffer + shift + + (HCI_COMPLETE_FRAME) * (i), + package_length - shift); + } + } + aircable_read(port); + } + + /* Schedule the next read _if_ we are still open */ + if (port->open_count) { + usb_fill_bulk_urb(port->read_urb, port->serial->dev, + usb_rcvbulkpipe(port->serial->dev, + port->bulk_in_endpointAddress), + port->read_urb->transfer_buffer, + port->read_urb->transfer_buffer_length, + aircable_read_bulk_callback, port); + + result = usb_submit_urb(urb, GFP_ATOMIC); + if (result) + dev_err(&urb->dev->dev, + "%s - failed resubmitting read urb, error %d\n", + __FUNCTION__, result); + } + + return; +} + +/* Based on ftdi_sio.c throttle */ +static void aircable_throttle(struct usb_serial_port *port) +{ + struct aircable_private *priv = usb_get_serial_port_data(port); + unsigned long flags; + + dbg("%s - port %d", __FUNCTION__, port->number); + + spin_lock_irqsave(&priv->rx_lock, flags); + priv->rx_flags |= THROTTLED; + spin_unlock_irqrestore(&priv->rx_lock, flags); +} + +/* Based on ftdi_sio.c unthrottle */ +static void aircable_unthrottle(struct usb_serial_port *port) +{ + struct aircable_private *priv = usb_get_serial_port_data(port); + int actually_throttled; + unsigned long flags; + + dbg("%s - port %d", __FUNCTION__, port->number); + + spin_lock_irqsave(&priv->rx_lock, flags); + actually_throttled = priv->rx_flags & ACTUALLY_THROTTLED; + priv->rx_flags &= ~(THROTTLED | ACTUALLY_THROTTLED); + spin_unlock_irqrestore(&priv->rx_lock, flags); + + if (actually_throttled) + schedule_work(&priv->rx_work); +} + +static struct usb_serial_driver aircable_device = { + .description = "aircable", + .id_table = id_table, + .num_ports = 1, + .attach = aircable_attach, + .probe = aircable_probe, + .shutdown = aircable_shutdown, + .write = aircable_write, + .write_room = aircable_write_room, + .write_bulk_callback = aircable_write_bulk_callback, + .read_bulk_callback = aircable_read_bulk_callback, + .throttle = aircable_throttle, + .unthrottle = aircable_unthrottle, +}; + +static struct usb_driver aircable_driver = { + .name = "aircable", + .probe = usb_serial_probe, + .disconnect = usb_serial_disconnect, + .id_table = id_table, +}; + +static int __init aircable_init (void) +{ + int retval; + retval = usb_serial_register(&aircable_device); + if (retval) + goto failed_serial_register; + retval = usb_register(&aircable_driver); + if (retval) + goto failed_usb_register; + return 0; + +failed_serial_register: + usb_serial_deregister(&aircable_device); +failed_usb_register: + return retval; +} + +static void __exit aircable_exit (void) +{ + usb_deregister(&aircable_driver); + usb_serial_deregister(&aircable_device); +} + +MODULE_AUTHOR(DRIVER_AUTHOR); +MODULE_DESCRIPTION(DRIVER_DESC); +MODULE_VERSION(DRIVER_VERSION); +MODULE_LICENSE("GPL"); + +module_init(aircable_init); +module_exit(aircable_exit); + +module_param(debug, bool, S_IRUGO | S_IWUSR); +MODULE_PARM_DESC(debug, "Debug enabled or not"); diff --git a/drivers/usb/serial/airprime.c b/drivers/usb/serial/airprime.c index 62082532a8b..6e1a84a858d 100644 --- a/drivers/usb/serial/airprime.c +++ b/drivers/usb/serial/airprime.c @@ -1,7 +1,7 @@ /* * AirPrime CDMA Wireless Serial USB driver * - * Copyright (C) 2005 Greg Kroah-Hartman <gregkh@suse.de> + * Copyright (C) 2005-2006 Greg Kroah-Hartman <gregkh@suse.de> * * This program is free software; you can redistribute it and/or * modify it under the terms of the GNU General Public License version @@ -11,26 +11,264 @@ #include <linux/kernel.h> #include <linux/init.h> #include <linux/tty.h> +#include <linux/tty_flip.h> #include <linux/module.h> #include <linux/usb.h> #include <linux/usb/serial.h> static struct usb_device_id id_table [] = { { USB_DEVICE(0x0c88, 0x17da) }, /* Kyocera Wireless KPC650/Passport */ - { USB_DEVICE(0xf3d, 0x0112) }, /* AirPrime CDMA Wireless PC Card */ - { USB_DEVICE(0x1410, 0x1110) }, /* Novatel Wireless Merlin CDMA */ + { USB_DEVICE(0x0f3d, 0x0112) }, /* AirPrime CDMA Wireless PC Card */ + { USB_DEVICE(0x1199, 0x0017) }, /* Sierra Wireless EM5625 */ + { USB_DEVICE(0x1199, 0x0018) }, /* Sierra Wireless MC5720 */ { USB_DEVICE(0x1199, 0x0112) }, /* Sierra Wireless Aircard 580 */ { USB_DEVICE(0x1199, 0x0218) }, /* Sierra Wireless MC5720 */ + { USB_DEVICE(0x1410, 0x1110) }, /* Novatel Wireless Merlin CDMA */ { }, }; MODULE_DEVICE_TABLE(usb, id_table); +#define URB_TRANSFER_BUFFER_SIZE 4096 +#define NUM_READ_URBS 4 +#define NUM_WRITE_URBS 4 +#define NUM_BULK_EPS 3 +#define MAX_BULK_EPS 6 + +/* if overridden by the user, then use their value for the size of the + * read and write urbs, and the number of endpoints */ +static int buffer_size = URB_TRANSFER_BUFFER_SIZE; +static int endpoints = NUM_BULK_EPS; +static int debug; +struct airprime_private { + spinlock_t lock; + int outstanding_urbs; + int throttled; + struct urb *read_urbp[NUM_READ_URBS]; +}; + +static void airprime_read_bulk_callback(struct urb *urb, struct pt_regs *regs) +{ + struct usb_serial_port *port = urb->context; + unsigned char *data = urb->transfer_buffer; + struct tty_struct *tty; + int result; + + dbg("%s - port %d", __FUNCTION__, port->number); + + if (urb->status) { + dbg("%s - nonzero read bulk status received: %d", + __FUNCTION__, urb->status); + /* something happened, so free up the memory for this urb */ + if (urb->transfer_buffer) { + kfree (urb->transfer_buffer); + urb->transfer_buffer = NULL; + } + return; + } + usb_serial_debug_data(debug, &port->dev, __FUNCTION__, urb->actual_length, data); + + tty = port->tty; + if (tty && urb->actual_length) { + tty_insert_flip_string (tty, data, urb->actual_length); + tty_flip_buffer_push (tty); + } + + result = usb_submit_urb (urb, GFP_ATOMIC); + if (result) + dev_err(&port->dev, "%s - failed resubmitting read urb, error %d\n", + __FUNCTION__, result); + return; +} + +static void airprime_write_bulk_callback(struct urb *urb, struct pt_regs *regs) +{ + struct usb_serial_port *port = urb->context; + struct airprime_private *priv = usb_get_serial_port_data(port); + unsigned long flags; + + dbg("%s - port %d", __FUNCTION__, port->number); + + /* free up the transfer buffer, as usb_free_urb() does not do this */ + kfree (urb->transfer_buffer); + + if (urb->status) + dbg("%s - nonzero write bulk status received: %d", + __FUNCTION__, urb->status); + spin_lock_irqsave(&priv->lock, flags); + --priv->outstanding_urbs; + spin_unlock_irqrestore(&priv->lock, flags); + + usb_serial_port_softint(port); +} + +static int airprime_open(struct usb_serial_port *port, struct file *filp) +{ + struct airprime_private *priv = usb_get_serial_port_data(port); + struct usb_serial *serial = port->serial; + struct urb *urb; + char *buffer = NULL; + int i; + int result = 0; + + dbg("%s - port %d", __FUNCTION__, port->number); + + /* initialize our private data structure if it isn't already created */ + if (!priv) { + priv = kzalloc(sizeof(*priv), GFP_KERNEL); + if (!priv) { + result = -ENOMEM; + goto out; + } + spin_lock_init(&priv->lock); + usb_set_serial_port_data(port, priv); + } + + for (i = 0; i < NUM_READ_URBS; ++i) { + buffer = kmalloc(buffer_size, GFP_KERNEL); + if (!buffer) { + dev_err(&port->dev, "%s - out of memory.\n", + __FUNCTION__); + result = -ENOMEM; + goto errout; + } + urb = usb_alloc_urb(0, GFP_KERNEL); + if (!urb) { + dev_err(&port->dev, "%s - no more urbs?\n", + __FUNCTION__); + result = -ENOMEM; + goto errout; + } + usb_fill_bulk_urb(urb, serial->dev, + usb_rcvbulkpipe(serial->dev, + port->bulk_out_endpointAddress), + buffer, buffer_size, + airprime_read_bulk_callback, port); + result = usb_submit_urb(urb, GFP_KERNEL); + if (result) { + dev_err(&port->dev, + "%s - failed submitting read urb %d for port %d, error %d\n", + __FUNCTION__, i, port->number, result); + goto errout; + } + /* remember this urb so we can kill it when the port is closed */ + priv->read_urbp[i] = urb; + } + goto out; + + errout: + /* some error happened, cancel any submitted urbs and clean up anything that + got allocated successfully */ + + for ( ; i >= 0; --i) { + urb = priv->read_urbp[i]; + if (urb) { + /* This urb was submitted successfully. So we have to + cancel it. + Unlinking the urb will invoke read_bulk_callback() + with an error status, so its transfer buffer will + be freed there */ + if (usb_unlink_urb (urb) != -EINPROGRESS) { + /* comments in drivers/usb/core/urb.c say this + can only happen if the urb was never submitted, + or has completed already. + Either way we may have to free the transfer + buffer here. */ + if (urb->transfer_buffer) { + kfree (urb->transfer_buffer); + urb->transfer_buffer = NULL; + } + } + usb_free_urb (urb); + } + } + + out: + return result; +} + +static void airprime_close(struct usb_serial_port *port, struct file * filp) +{ + struct airprime_private *priv = usb_get_serial_port_data(port); + int i; + + dbg("%s - port %d", __FUNCTION__, port->number); + + /* killing the urb will invoke read_bulk_callback() with an error status, + so the transfer buffer will be freed there */ + for (i = 0; i < NUM_READ_URBS; ++i) { + usb_kill_urb (priv->read_urbp[i]); + usb_free_urb (priv->read_urbp[i]); + } + + /* free up private structure */ + kfree (priv); + usb_set_serial_port_data(port, NULL); +} + +static int airprime_write(struct usb_serial_port *port, + const unsigned char *buf, int count) +{ + struct airprime_private *priv = usb_get_serial_port_data(port); + struct usb_serial *serial = port->serial; + struct urb *urb; + unsigned char *buffer; + unsigned long flags; + int status; + dbg("%s - port %d", __FUNCTION__, port->number); + + spin_lock_irqsave(&priv->lock, flags); + if (priv->outstanding_urbs > NUM_WRITE_URBS) { + spin_unlock_irqrestore(&priv->lock, flags); + dbg("%s - write limit hit\n", __FUNCTION__); + return 0; + } + spin_unlock_irqrestore(&priv->lock, flags); + buffer = kmalloc(count, GFP_ATOMIC); + if (!buffer) { + dev_err(&port->dev, "out of memory\n"); + return -ENOMEM; + } + urb = usb_alloc_urb(0, GFP_ATOMIC); + if (!urb) { + dev_err(&port->dev, "no more free urbs\n"); + kfree (buffer); + return -ENOMEM; + } + memcpy (buffer, buf, count); + + usb_serial_debug_data(debug, &port->dev, __FUNCTION__, count, buffer); + + usb_fill_bulk_urb(urb, serial->dev, + usb_sndbulkpipe(serial->dev, + port->bulk_out_endpointAddress), + buffer, count, + airprime_write_bulk_callback, port); + + /* send it down the pipe */ + status = usb_submit_urb(urb, GFP_ATOMIC); + if (status) { + dev_err(&port->dev, + "%s - usb_submit_urb(write bulk) failed with status = %d\n", + __FUNCTION__, status); + count = status; + kfree (buffer); + } else { + spin_lock_irqsave(&priv->lock, flags); + ++priv->outstanding_urbs; + spin_unlock_irqrestore(&priv->lock, flags); + } + /* we are done with this urb, so let the host driver + * really free it when it is finished with it */ + usb_free_urb (urb); + return count; +} + static struct usb_driver airprime_driver = { .name = "airprime", .probe = usb_serial_probe, .disconnect = usb_serial_disconnect, .id_table = id_table, - .no_dynamic_id = 1, + .no_dynamic_id = 1, }; static struct usb_serial_driver airprime_device = { @@ -42,13 +280,17 @@ static struct usb_serial_driver airprime_device = { .num_interrupt_in = NUM_DONT_CARE, .num_bulk_in = NUM_DONT_CARE, .num_bulk_out = NUM_DONT_CARE, - .num_ports = 1, + .open = airprime_open, + .close = airprime_close, + .write = airprime_write, }; static int __init airprime_init(void) { int retval; + airprime_device.num_ports = + (endpoints > 0 && endpoints <= MAX_BULK_EPS) ? endpoints : NUM_BULK_EPS; retval = usb_serial_register(&airprime_device); if (retval) return retval; @@ -60,6 +302,8 @@ static int __init airprime_init(void) static void __exit airprime_exit(void) { + dbg("%s", __FUNCTION__); + usb_deregister(&airprime_driver); usb_serial_deregister(&airprime_device); } @@ -67,3 +311,10 @@ static void __exit airprime_exit(void) module_init(airprime_init); module_exit(airprime_exit); MODULE_LICENSE("GPL"); + +module_param(debug, bool, S_IRUGO | S_IWUSR); +MODULE_PARM_DESC(debug, "Debug enabled"); +module_param(buffer_size, int, 0); +MODULE_PARM_DESC(buffer_size, "Size of the transfer buffers in bytes (default 4096)"); +module_param(endpoints, int, 0); +MODULE_PARM_DESC(endpoints, "Number of bulk EPs to configure (default 3)"); diff --git a/drivers/usb/serial/ark3116.c b/drivers/usb/serial/ark3116.c index 970d9ef0a7a..ca52f12f0e2 100644 --- a/drivers/usb/serial/ark3116.c +++ b/drivers/usb/serial/ark3116.c @@ -1,4 +1,7 @@ /* + * Copyright (C) 2006 + * Simon Schulz (ark3116_driver <at> auctionant.de) + * * ark3116 * - implements a driver for the arkmicro ark3116 chipset (vendor=0x6547, * productid=0x0232) (used in a datacable called KQ-U8A) @@ -8,8 +11,6 @@ * * - based on logs created by usbsnoopy * - * Author : Simon Schulz [ark3116_driver<AT>auctionant.de] - * * This program is free software; you can redistribute it and/or modify it * under the terms of the GNU General Public License as published by the * Free Software Foundation; either version 2 of the License, or (at your @@ -22,6 +23,8 @@ #include <linux/module.h> #include <linux/usb.h> #include <linux/usb/serial.h> +#include <linux/serial.h> +#include <asm/uaccess.h> static int debug; @@ -43,10 +46,10 @@ static inline void ARK3116_SND(struct usb_serial *serial, int seq, { int result; result = usb_control_msg(serial->dev, - usb_sndctrlpipe(serial->dev,0), + usb_sndctrlpipe(serial->dev, 0), request, requesttype, value, index, - NULL,0x00, 1000); - dbg("%03d > ok",seq); + NULL, 0x00, 1000); + dbg("%03d > ok", seq); } static inline void ARK3116_RCV(struct usb_serial *serial, int seq, @@ -56,27 +59,25 @@ static inline void ARK3116_RCV(struct usb_serial *serial, int seq, { int result; result = usb_control_msg(serial->dev, - usb_rcvctrlpipe(serial->dev,0), - request, requesttype, value, index, - buf, 0x0000001, 1000); + usb_rcvctrlpipe(serial->dev, 0), + request, requesttype, value, index, + buf, 0x0000001, 1000); if (result) - dbg("%03d < %d bytes [0x%02X]",seq, result, buf[0]); + dbg("%03d < %d bytes [0x%02X]", seq, result, buf[0]); else dbg("%03d < 0 bytes", seq); } - static inline void ARK3116_RCV_QUIET(struct usb_serial *serial, __u8 request, __u8 requesttype, __u16 value, __u16 index, char *buf) { usb_control_msg(serial->dev, - usb_rcvctrlpipe(serial->dev,0), + usb_rcvctrlpipe(serial->dev, 0), request, requesttype, value, index, buf, 0x0000001, 1000); } - static int ark3116_attach(struct usb_serial *serial) { char *buf; @@ -84,10 +85,10 @@ static int ark3116_attach(struct usb_serial *serial) int i; for (i = 0; i < serial->num_ports; ++i) { - priv = kmalloc (sizeof (struct ark3116_private), GFP_KERNEL); + priv = kmalloc(sizeof (struct ark3116_private), GFP_KERNEL); if (!priv) goto cleanup; - memset (priv, 0x00, sizeof (struct ark3116_private)); + memset(priv, 0x00, sizeof (struct ark3116_private)); spin_lock_init(&priv->lock); usb_set_serial_port_data(serial->port[i], priv); @@ -95,63 +96,62 @@ static int ark3116_attach(struct usb_serial *serial) buf = kmalloc(1, GFP_KERNEL); if (!buf) { - dbg("error kmalloc -> out of mem ?"); + dbg("error kmalloc -> out of mem?"); goto cleanup; } /* 3 */ - ARK3116_SND(serial, 3,0xFE,0x40,0x0008,0x0002); - ARK3116_SND(serial, 4,0xFE,0x40,0x0008,0x0001); - ARK3116_SND(serial, 5,0xFE,0x40,0x0000,0x0008); - ARK3116_SND(serial, 6,0xFE,0x40,0x0000,0x000B); + ARK3116_SND(serial, 3, 0xFE, 0x40, 0x0008, 0x0002); + ARK3116_SND(serial, 4, 0xFE, 0x40, 0x0008, 0x0001); + ARK3116_SND(serial, 5, 0xFE, 0x40, 0x0000, 0x0008); + ARK3116_SND(serial, 6, 0xFE, 0x40, 0x0000, 0x000B); /* <-- seq7 */ - ARK3116_RCV(serial, 7,0xFE,0xC0,0x0000,0x0003, 0x00, buf); - ARK3116_SND(serial, 8,0xFE,0x40,0x0080,0x0003); - ARK3116_SND(serial, 9,0xFE,0x40,0x001A,0x0000); - ARK3116_SND(serial,10,0xFE,0x40,0x0000,0x0001); - ARK3116_SND(serial,11,0xFE,0x40,0x0000,0x0003); + ARK3116_RCV(serial, 7, 0xFE, 0xC0, 0x0000, 0x0003, 0x00, buf); + ARK3116_SND(serial, 8, 0xFE, 0x40, 0x0080, 0x0003); + ARK3116_SND(serial, 9, 0xFE, 0x40, 0x001A, 0x0000); + ARK3116_SND(serial, 10, 0xFE, 0x40, 0x0000, 0x0001); + ARK3116_SND(serial, 11, 0xFE, 0x40, 0x0000, 0x0003); /* <-- seq12 */ - ARK3116_RCV(serial,12,0xFE,0xC0,0x0000,0x0004, 0x00, buf); - ARK3116_SND(serial,13,0xFE,0x40,0x0000,0x0004); + ARK3116_RCV(serial, 12, 0xFE, 0xC0, 0x0000, 0x0004, 0x00, buf); + ARK3116_SND(serial, 13, 0xFE, 0x40, 0x0000, 0x0004); /* 14 */ - ARK3116_RCV(serial,14,0xFE,0xC0,0x0000,0x0004, 0x00, buf); - ARK3116_SND(serial,15,0xFE,0x40,0x0000,0x0004); + ARK3116_RCV(serial, 14, 0xFE, 0xC0, 0x0000, 0x0004, 0x00, buf); + ARK3116_SND(serial, 15, 0xFE, 0x40, 0x0000, 0x0004); /* 16 */ - ARK3116_RCV(serial,16,0xFE,0xC0,0x0000,0x0004, 0x00, buf); + ARK3116_RCV(serial, 16, 0xFE, 0xC0, 0x0000, 0x0004, 0x00, buf); /* --> seq17 */ - ARK3116_SND(serial,17,0xFE,0x40,0x0001,0x0004); + ARK3116_SND(serial, 17, 0xFE, 0x40, 0x0001, 0x0004); /* <-- seq18 */ - ARK3116_RCV(serial,18,0xFE,0xC0,0x0000,0x0004, 0x01, buf); + ARK3116_RCV(serial, 18, 0xFE, 0xC0, 0x0000, 0x0004, 0x01, buf); /* --> seq19 */ - ARK3116_SND(serial,19,0xFE,0x40,0x0003,0x0004); - + ARK3116_SND(serial, 19, 0xFE, 0x40, 0x0003, 0x0004); /* <-- seq20 */ - /* seems like serial port status info (RTS, CTS,...) */ - /* returns modem control line status ?! */ - ARK3116_RCV(serial,20,0xFE,0xC0,0x0000,0x0006, 0xFF, buf); - - /* set 9600 baud & do some init ?! */ - ARK3116_SND(serial,147,0xFE,0x40,0x0083,0x0003); - ARK3116_SND(serial,148,0xFE,0x40,0x0038,0x0000); - ARK3116_SND(serial,149,0xFE,0x40,0x0001,0x0001); - ARK3116_SND(serial,150,0xFE,0x40,0x0003,0x0003); - ARK3116_RCV(serial,151,0xFE,0xC0,0x0000,0x0004,0x03, buf); - ARK3116_SND(serial,152,0xFE,0x40,0x0000,0x0003); - ARK3116_RCV(serial,153,0xFE,0xC0,0x0000,0x0003,0x00, buf); - ARK3116_SND(serial,154,0xFE,0x40,0x0003,0x0003); + /* seems like serial port status info (RTS, CTS, ...) */ + /* returns modem control line status?! */ + ARK3116_RCV(serial, 20, 0xFE, 0xC0, 0x0000, 0x0006, 0xFF, buf); + + /* set 9600 baud & do some init?! */ + ARK3116_SND(serial, 147, 0xFE, 0x40, 0x0083, 0x0003); + ARK3116_SND(serial, 148, 0xFE, 0x40, 0x0038, 0x0000); + ARK3116_SND(serial, 149, 0xFE, 0x40, 0x0001, 0x0001); + ARK3116_SND(serial, 150, 0xFE, 0x40, 0x0003, 0x0003); + ARK3116_RCV(serial, 151, 0xFE, 0xC0, 0x0000, 0x0004, 0x03, buf); + ARK3116_SND(serial, 152, 0xFE, 0x40, 0x0000, 0x0003); + ARK3116_RCV(serial, 153, 0xFE, 0xC0, 0x0000, 0x0003, 0x00, buf); + ARK3116_SND(serial, 154, 0xFE, 0x40, 0x0003, 0x0003); kfree(buf); - return(0); + return 0; cleanup: - for (--i; i>=0; --i) + for (--i; i >= 0; --i) usb_set_serial_port_data(serial->port[i], NULL); return -ENOMEM; } @@ -180,7 +180,8 @@ static void ark3116_set_termios(struct usb_serial_port *port, spin_lock_irqsave(&priv->lock, flags); if (!priv->termios_initialized) { *(port->tty->termios) = tty_std_termios; - port->tty->termios->c_cflag = B9600 | CS8 | CREAD | HUPCL | CLOCAL; + port->tty->termios->c_cflag = B9600 | CS8 + | CREAD | HUPCL | CLOCAL; priv->termios_initialized = 1; } spin_unlock_irqrestore(&priv->lock, flags); @@ -204,8 +205,8 @@ static void ark3116_set_termios(struct usb_serial_port *port, } /* set data bit count (8/7/6/5) */ - if (cflag & CSIZE){ - switch (cflag & CSIZE){ + if (cflag & CSIZE) { + switch (cflag & CSIZE) { case CS5: config |= 0x00; dbg("setting CS5"); @@ -219,7 +220,8 @@ static void ark3116_set_termios(struct usb_serial_port *port, dbg("setting CS7"); break; default: - err ("CSIZE was set but not CS5-CS8, using CS8!"); + err("CSIZE was set but not CS5-CS8, using CS8!"); + /* fall through */ case CS8: config |= 0x03; dbg("setting CS8"); @@ -227,8 +229,8 @@ static void ark3116_set_termios(struct usb_serial_port *port, } } - /* set parity (NONE,EVEN,ODD) */ - if (cflag & PARENB){ + /* set parity (NONE/EVEN/ODD) */ + if (cflag & PARENB) { if (cflag & PARODD) { config |= 0x08; dbg("setting parity to ODD"); @@ -240,20 +242,19 @@ static void ark3116_set_termios(struct usb_serial_port *port, dbg("setting parity to NONE"); } - /* SET STOPBIT (1/2) */ + /* set stop bit (1/2) */ if (cflag & CSTOPB) { config |= 0x04; - dbg ("setting 2 stop bits"); + dbg("setting 2 stop bits"); } else { - dbg ("setting 1 stop bit"); + dbg("setting 1 stop bit"); } - - /* set baudrate: */ + /* set baudrate */ baud = 0; - switch (cflag & CBAUD){ + switch (cflag & CBAUD) { case B0: - err("can't set 0baud, using 9600 instead"); + err("can't set 0 baud, using 9600 instead"); break; case B75: baud = 75; break; case B150: baud = 150; break; @@ -285,38 +286,40 @@ static void ark3116_set_termios(struct usb_serial_port *port, */ if (baud == 460800) /* strange, for 460800 the formula is wrong - * (dont use round(), then 9600baud is wrong) */ + * if using round() then 9600baud is wrong) */ ark3116_baud = 7; else ark3116_baud = 3000000 / baud; /* ? */ - ARK3116_RCV(serial,0,0xFE,0xC0,0x0000,0x0003, 0x03, buf); + ARK3116_RCV(serial, 0, 0xFE, 0xC0, 0x0000, 0x0003, 0x03, buf); + /* offset = buf[0]; */ /* offset = 0x03; */ - /* dbg("using 0x%04X as target for 0x0003:",0x0080+offset); */ - + /* dbg("using 0x%04X as target for 0x0003:", 0x0080 + offset); */ /* set baudrate */ - dbg("setting baudrate to %d (->reg=%d)",baud,ark3116_baud); - ARK3116_SND(serial,147,0xFE,0x40,0x0083,0x0003); - ARK3116_SND(serial,148,0xFE,0x40,(ark3116_baud & 0x00FF) ,0x0000); - ARK3116_SND(serial,149,0xFE,0x40,(ark3116_baud & 0xFF00)>>8,0x0001); - ARK3116_SND(serial,150,0xFE,0x40,0x0003,0x0003); + dbg("setting baudrate to %d (->reg=%d)", baud, ark3116_baud); + ARK3116_SND(serial, 147, 0xFE, 0x40, 0x0083, 0x0003); + ARK3116_SND(serial, 148, 0xFE, 0x40, + (ark3116_baud & 0x00FF), 0x0000); + ARK3116_SND(serial, 149, 0xFE, 0x40, + (ark3116_baud & 0xFF00) >> 8, 0x0001); + ARK3116_SND(serial, 150, 0xFE, 0x40, 0x0003, 0x0003); /* ? */ - ARK3116_RCV(serial,151,0xFE,0xC0,0x0000,0x0004,0x03, buf); - ARK3116_SND(serial,152,0xFE,0x40,0x0000,0x0003); + ARK3116_RCV(serial, 151, 0xFE, 0xC0, 0x0000, 0x0004, 0x03, buf); + ARK3116_SND(serial, 152, 0xFE, 0x40, 0x0000, 0x0003); /* set data bit count, stop bit count & parity: */ dbg("updating bit count, stop bit or parity (cfg=0x%02X)", config); - ARK3116_RCV(serial,153,0xFE,0xC0,0x0000,0x0003,0x00, buf); - ARK3116_SND(serial,154,0xFE,0x40,config,0x0003); + ARK3116_RCV(serial, 153, 0xFE, 0xC0, 0x0000, 0x0003, 0x00, buf); + ARK3116_SND(serial, 154, 0xFE, 0x40, config, 0x0003); if (cflag & CRTSCTS) - dbg("CRTSCTS not supported by chipset ?!"); + dbg("CRTSCTS not supported by chipset?!"); - /* TEST ARK3116_SND(154,0xFE,0x40,0xFFFF, 0x0006); */ + /* TEST ARK3116_SND(154, 0xFE, 0x40, 0xFFFF, 0x0006); */ kfree(buf); return; @@ -329,11 +332,11 @@ static int ark3116_open(struct usb_serial_port *port, struct file *filp) char *buf; int result = 0; - dbg("%s - port %d", __FUNCTION__, port->number); + dbg("%s - port %d", __FUNCTION__, port->number); buf = kmalloc(1, GFP_KERNEL); if (!buf) { - dbg("error kmalloc -> out of mem ?"); + dbg("error kmalloc -> out of mem?"); return -ENOMEM; } @@ -342,44 +345,68 @@ static int ark3116_open(struct usb_serial_port *port, struct file *filp) return result; /* open */ - ARK3116_RCV(serial,111,0xFE,0xC0,0x0000,0x0003, 0x02, buf); + ARK3116_RCV(serial, 111, 0xFE, 0xC0, 0x0000, 0x0003, 0x02, buf); - ARK3116_SND(serial,112,0xFE,0x40,0x0082,0x0003); - ARK3116_SND(serial,113,0xFE,0x40,0x001A,0x0000); - ARK3116_SND(serial,114,0xFE,0x40,0x0000,0x0001); - ARK3116_SND(serial,115,0xFE,0x40,0x0002,0x0003); + ARK3116_SND(serial, 112, 0xFE, 0x40, 0x0082, 0x0003); + ARK3116_SND(serial, 113, 0xFE, 0x40, 0x001A, 0x0000); + ARK3116_SND(serial, 114, 0xFE, 0x40, 0x0000, 0x0001); + ARK3116_SND(serial, 115, 0xFE, 0x40, 0x0002, 0x0003); - ARK3116_RCV(serial,116,0xFE,0xC0,0x0000,0x0004, 0x03, buf); - ARK3116_SND(serial,117,0xFE,0x40,0x0002,0x0004); + ARK3116_RCV(serial, 116, 0xFE, 0xC0, 0x0000, 0x0004, 0x03, buf); + ARK3116_SND(serial, 117, 0xFE, 0x40, 0x0002, 0x0004); - ARK3116_RCV(serial,118,0xFE,0xC0,0x0000,0x0004, 0x02, buf); - ARK3116_SND(serial,119,0xFE,0x40,0x0000,0x0004); + ARK3116_RCV(serial, 118, 0xFE, 0xC0, 0x0000, 0x0004, 0x02, buf); + ARK3116_SND(serial, 119, 0xFE, 0x40, 0x0000, 0x0004); - ARK3116_RCV(serial,120,0xFE,0xC0,0x0000,0x0004, 0x00, buf); + ARK3116_RCV(serial, 120, 0xFE, 0xC0, 0x0000, 0x0004, 0x00, buf); - ARK3116_SND(serial,121,0xFE,0x40,0x0001,0x0004); + ARK3116_SND(serial, 121, 0xFE, 0x40, 0x0001, 0x0004); - ARK3116_RCV(serial,122,0xFE,0xC0,0x0000,0x0004, 0x01, buf); + ARK3116_RCV(serial, 122, 0xFE, 0xC0, 0x0000, 0x0004, 0x01, buf); - ARK3116_SND(serial,123,0xFE,0x40,0x0003,0x0004); + ARK3116_SND(serial, 123, 0xFE, 0x40, 0x0003, 0x0004); - /* returns different values (control lines ?!) */ - ARK3116_RCV(serial,124,0xFE,0xC0,0x0000,0x0006, 0xFF, buf); + /* returns different values (control lines?!) */ + ARK3116_RCV(serial, 124, 0xFE, 0xC0, 0x0000, 0x0006, 0xFF, buf); - /* initialise termios: */ + /* initialise termios */ if (port->tty) ark3116_set_termios(port, &tmp_termios); kfree(buf); return result; - } static int ark3116_ioctl(struct usb_serial_port *port, struct file *file, unsigned int cmd, unsigned long arg) { - dbg("ioctl not supported yet..."); + struct serial_struct serstruct; + void __user *user_arg = (void __user *)arg; + + switch (cmd) { + case TIOCGSERIAL: + /* XXX: Some of these values are probably wrong. */ + memset(&serstruct, 0, sizeof (serstruct)); + serstruct.type = PORT_16654; + serstruct.line = port->serial->minor; + serstruct.port = port->number; + serstruct.custom_divisor = 0; + serstruct.baud_base = 460800; + + if (copy_to_user(user_arg, &serstruct, sizeof (serstruct))) + return -EFAULT; + + return 0; + case TIOCSSERIAL: + if (copy_from_user(&serstruct, user_arg, sizeof (serstruct))) + return -EFAULT; + return 0; + default: + dbg("%s cmd 0x%04x not supported", __FUNCTION__, cmd); + break; + } + return -ENOIOCTLCMD; } @@ -389,7 +416,7 @@ static int ark3116_tiocmget(struct usb_serial_port *port, struct file *file) char *buf; char temp; - /* seems like serial port status info (RTS, CTS,...) is stored + /* seems like serial port status info (RTS, CTS, ...) is stored * in reg(?) 0x0006 * pcb connection point 11 = GND -> sets bit4 of response * pcb connection point 7 = GND -> sets bit6 of response @@ -401,16 +428,16 @@ static int ark3116_tiocmget(struct usb_serial_port *port, struct file *file) return -ENOMEM; } - /* read register: */ - ARK3116_RCV_QUIET(serial,0xFE,0xC0,0x0000,0x0006,buf); + /* read register */ + ARK3116_RCV_QUIET(serial, 0xFE, 0xC0, 0x0000, 0x0006, buf); temp = buf[0]; kfree(buf); - /* i do not really know if bit4=CTS and bit6=DSR... was just a - * quick guess !! + /* i do not really know if bit4=CTS and bit6=DSR... just a + * quick guess! */ - return (temp & (1<<4) ? TIOCM_CTS : 0) | - (temp & (1<<6) ? TIOCM_DSR : 0); + return (temp & (1<<4) ? TIOCM_CTS : 0) + | (temp & (1<<6) ? TIOCM_DSR : 0); } static struct usb_driver ark3116_driver = { diff --git a/drivers/usb/serial/cypress_m8.c b/drivers/usb/serial/cypress_m8.c index ee70fddcab6..e1173c1aee3 100644 --- a/drivers/usb/serial/cypress_m8.c +++ b/drivers/usb/serial/cypress_m8.c @@ -129,6 +129,9 @@ struct cypress_private { int cmd_ctrl; /* always set this to 1 before issuing a command */ struct cypress_buf *buf; /* write buffer */ int write_urb_in_use; /* write urb in use indicator */ + int write_urb_interval; /* interval to use for write urb */ + int read_urb_interval; /* interval to use for read urb */ + int comm_is_ok; /* true if communication is (still) ok */ int termios_initialized; __u8 line_control; /* holds dtr / rts value */ __u8 current_status; /* received from last read - info on dsr,cts,cd,ri,etc */ @@ -168,6 +171,7 @@ static int cypress_tiocmset (struct usb_serial_port *port, struct file *file, static int cypress_chars_in_buffer (struct usb_serial_port *port); static void cypress_throttle (struct usb_serial_port *port); static void cypress_unthrottle (struct usb_serial_port *port); +static void cypress_set_dead (struct usb_serial_port *port); static void cypress_read_int_callback (struct urb *urb, struct pt_regs *regs); static void cypress_write_int_callback (struct urb *urb, struct pt_regs *regs); /* baud helper functions */ @@ -288,6 +292,9 @@ static int cypress_serial_control (struct usb_serial_port *port, unsigned baud_m priv = usb_get_serial_port_data(port); + if (!priv->comm_is_ok) + return -ENODEV; + switch(cypress_request_type) { case CYPRESS_SET_CONFIG: @@ -365,13 +372,12 @@ static int cypress_serial_control (struct usb_serial_port *port, unsigned baud_m if (tries++ >= 3) break; - if (retval == EPIPE) - usb_clear_halt(port->serial->dev, 0x00); - } while (retval != 8 && retval != ENODEV); + } while (retval != 8 && retval != -ENODEV); - if (retval != 8) + if (retval != 8) { err("%s - failed sending serial line settings - %d", __FUNCTION__, retval); - else { + cypress_set_dead(port); + } else { spin_lock_irqsave(&priv->lock, flags); priv->baud_rate = new_baudrate; priv->cbr_mask = baud_mask; @@ -392,12 +398,11 @@ static int cypress_serial_control (struct usb_serial_port *port, unsigned baud_m if (tries++ >= 3) break; - if (retval == EPIPE) - usb_clear_halt(port->serial->dev, 0x00); - } while (retval != 5 && retval != ENODEV); + } while (retval != 5 && retval != -ENODEV); if (retval != 5) { err("%s - failed to retrieve serial line settings - %d", __FUNCTION__, retval); + cypress_set_dead(port); return retval; } else { spin_lock_irqsave(&priv->lock, flags); @@ -419,6 +424,24 @@ static int cypress_serial_control (struct usb_serial_port *port, unsigned baud_m } /* cypress_serial_control */ +static void cypress_set_dead(struct usb_serial_port *port) +{ + struct cypress_private *priv = usb_get_serial_port_data(port); + unsigned long flags; + + spin_lock_irqsave(&priv->lock, flags); + if (!priv->comm_is_ok) { + spin_unlock_irqrestore(&priv->lock, flags); + return; + } + priv->comm_is_ok = 0; + spin_unlock_irqrestore(&priv->lock, flags); + + err("cypress_m8 suspending failing port %d - interval might be too short", + port->number); +} + + /* given a baud mask, it will return integer baud on success */ static int mask_to_rate (unsigned mask) { @@ -472,13 +495,15 @@ static unsigned rate_to_mask (int rate) static int generic_startup (struct usb_serial *serial) { struct cypress_private *priv; + struct usb_serial_port *port = serial->port[0]; - dbg("%s - port %d", __FUNCTION__, serial->port[0]->number); + dbg("%s - port %d", __FUNCTION__, port->number); priv = kzalloc(sizeof (struct cypress_private), GFP_KERNEL); if (!priv) return -ENOMEM; + priv->comm_is_ok = !0; spin_lock_init(&priv->lock); priv->buf = cypress_buf_alloc(CYPRESS_BUF_SIZE); if (priv->buf == NULL) { @@ -489,13 +514,24 @@ static int generic_startup (struct usb_serial *serial) usb_reset_configuration (serial->dev); - interval = 1; priv->cmd_ctrl = 0; priv->line_control = 0; priv->termios_initialized = 0; priv->rx_flags = 0; priv->cbr_mask = B300; - usb_set_serial_port_data(serial->port[0], priv); + if (interval > 0) { + priv->write_urb_interval = interval; + priv->read_urb_interval = interval; + dbg("%s - port %d read & write intervals forced to %d", + __FUNCTION__,port->number,interval); + } else { + priv->write_urb_interval = port->interrupt_out_urb->interval; + priv->read_urb_interval = port->interrupt_in_urb->interval; + dbg("%s - port %d intervals: read=%d write=%d", + __FUNCTION__,port->number, + priv->read_urb_interval,priv->write_urb_interval); + } + usb_set_serial_port_data(port, priv); return 0; } @@ -585,6 +621,9 @@ static int cypress_open (struct usb_serial_port *port, struct file *filp) dbg("%s - port %d", __FUNCTION__, port->number); + if (!priv->comm_is_ok) + return -EIO; + /* clear halts before open */ usb_clear_halt(serial->dev, 0x81); usb_clear_halt(serial->dev, 0x02); @@ -624,11 +663,12 @@ static int cypress_open (struct usb_serial_port *port, struct file *filp) usb_fill_int_urb(port->interrupt_in_urb, serial->dev, usb_rcvintpipe(serial->dev, port->interrupt_in_endpointAddress), port->interrupt_in_urb->transfer_buffer, port->interrupt_in_urb->transfer_buffer_length, - cypress_read_int_callback, port, interval); + cypress_read_int_callback, port, priv->read_urb_interval); result = usb_submit_urb(port->interrupt_in_urb, GFP_KERNEL); if (result){ dev_err(&port->dev, "%s - failed submitting read urb, error %d\n", __FUNCTION__, result); + cypress_set_dead(port); } return result; @@ -733,6 +773,9 @@ static void cypress_send(struct usb_serial_port *port) struct cypress_private *priv = usb_get_serial_port_data(port); unsigned long flags; + if (!priv->comm_is_ok) + return; + dbg("%s - port %d", __FUNCTION__, port->number); dbg("%s - interrupt out size is %d", __FUNCTION__, port->interrupt_out_size); @@ -806,14 +849,16 @@ send: usb_serial_debug_data(debug, &port->dev, __FUNCTION__, port->interrupt_out_size, port->interrupt_out_urb->transfer_buffer); - port->interrupt_out_urb->transfer_buffer_length = actual_size; - port->interrupt_out_urb->dev = port->serial->dev; - port->interrupt_out_urb->interval = interval; + usb_fill_int_urb(port->interrupt_out_urb, port->serial->dev, + usb_sndintpipe(port->serial->dev, port->interrupt_out_endpointAddress), + port->interrupt_out_buffer, port->interrupt_out_size, + cypress_write_int_callback, port, priv->write_urb_interval); result = usb_submit_urb (port->interrupt_out_urb, GFP_ATOMIC); if (result) { dev_err(&port->dev, "%s - failed submitting write urb, error %d\n", __FUNCTION__, result); priv->write_urb_in_use = 0; + cypress_set_dead(port); } spin_lock_irqsave(&priv->lock, flags); @@ -1214,13 +1259,18 @@ static void cypress_unthrottle (struct usb_serial_port *port) priv->rx_flags = 0; spin_unlock_irqrestore(&priv->lock, flags); + if (!priv->comm_is_ok) + return; + if (actually_throttled) { port->interrupt_in_urb->dev = port->serial->dev; result = usb_submit_urb(port->interrupt_in_urb, GFP_ATOMIC); - if (result) + if (result) { dev_err(&port->dev, "%s - failed submitting read urb, " "error %d\n", __FUNCTION__, result); + cypress_set_dead(port); + } } } @@ -1240,9 +1290,22 @@ static void cypress_read_int_callback(struct urb *urb, struct pt_regs *regs) dbg("%s - port %d", __FUNCTION__, port->number); - if (urb->status) { - dbg("%s - nonzero read status received: %d", __FUNCTION__, - urb->status); + switch (urb->status) { + case 0: /* success */ + break; + case -ECONNRESET: + case -ENOENT: + case -ESHUTDOWN: + /* precursor to disconnect so just go away */ + return; + case -EPIPE: + usb_clear_halt(port->serial->dev,0x81); + break; + default: + /* something ugly is going on... */ + dev_err(&urb->dev->dev,"%s - unexpected nonzero read status received: %d\n", + __FUNCTION__,urb->status); + cypress_set_dead(port); return; } @@ -1343,18 +1406,20 @@ continue_read: /* Continue trying to always read... unless the port has closed. */ - if (port->open_count > 0) { + if (port->open_count > 0 && priv->comm_is_ok) { usb_fill_int_urb(port->interrupt_in_urb, port->serial->dev, usb_rcvintpipe(port->serial->dev, port->interrupt_in_endpointAddress), port->interrupt_in_urb->transfer_buffer, port->interrupt_in_urb->transfer_buffer_length, - cypress_read_int_callback, port, interval); + cypress_read_int_callback, port, priv->read_urb_interval); result = usb_submit_urb(port->interrupt_in_urb, GFP_ATOMIC); - if (result) + if (result) { dev_err(&urb->dev->dev, "%s - failed resubmitting " "read urb, error %d\n", __FUNCTION__, result); + cypress_set_dead(port); + } } return; @@ -1380,20 +1445,26 @@ static void cypress_write_int_callback(struct urb *urb, struct pt_regs *regs) dbg("%s - urb shutting down with status: %d", __FUNCTION__, urb->status); priv->write_urb_in_use = 0; return; - case -EPIPE: /* no break needed */ + case -EPIPE: /* no break needed; clear halt and resubmit */ + if (!priv->comm_is_ok) + break; usb_clear_halt(port->serial->dev, 0x02); - default: /* error in the urb, so we have to resubmit it */ - dbg("%s - Overflow in write", __FUNCTION__); dbg("%s - nonzero write bulk status received: %d", __FUNCTION__, urb->status); port->interrupt_out_urb->transfer_buffer_length = 1; port->interrupt_out_urb->dev = port->serial->dev; result = usb_submit_urb(port->interrupt_out_urb, GFP_ATOMIC); - if (result) - dev_err(&urb->dev->dev, "%s - failed resubmitting write urb, error %d\n", - __FUNCTION__, result); - else + if (!result) return; + dev_err(&urb->dev->dev, "%s - failed resubmitting write urb, error %d\n", + __FUNCTION__, result); + cypress_set_dead(port); + break; + default: + dev_err(&urb->dev->dev,"%s - unexpected nonzero write status received: %d\n", + __FUNCTION__,urb->status); + cypress_set_dead(port); + break; } priv->write_urb_in_use = 0; diff --git a/drivers/usb/serial/ftdi_sio.c b/drivers/usb/serial/ftdi_sio.c index c6115aa1b44..1f7b72553f3 100644 --- a/drivers/usb/serial/ftdi_sio.c +++ b/drivers/usb/serial/ftdi_sio.c @@ -1101,25 +1101,29 @@ static ssize_t store_event_char(struct device *dev, struct device_attribute *att static DEVICE_ATTR(latency_timer, S_IWUSR | S_IRUGO, show_latency_timer, store_latency_timer); static DEVICE_ATTR(event_char, S_IWUSR, NULL, store_event_char); -static void create_sysfs_attrs(struct usb_serial *serial) -{ +static int create_sysfs_attrs(struct usb_serial *serial) +{ struct ftdi_private *priv; struct usb_device *udev; + int retval = 0; dbg("%s",__FUNCTION__); - + priv = usb_get_serial_port_data(serial->port[0]); udev = serial->dev; - + /* XXX I've no idea if the original SIO supports the event_char * sysfs parameter, so I'm playing it safe. */ if (priv->chip_type != SIO) { dbg("sysfs attributes for %s", ftdi_chip_name[priv->chip_type]); - device_create_file(&udev->dev, &dev_attr_event_char); - if (priv->chip_type == FT232BM || priv->chip_type == FT2232C) { - device_create_file(&udev->dev, &dev_attr_latency_timer); + retval = device_create_file(&udev->dev, &dev_attr_event_char); + if ((!retval) && + (priv->chip_type == FT232BM || priv->chip_type == FT2232C)) { + retval = device_create_file(&udev->dev, + &dev_attr_latency_timer); } } + return retval; } static void remove_sysfs_attrs(struct usb_serial *serial) @@ -1162,7 +1166,8 @@ static int ftdi_sio_attach (struct usb_serial *serial) struct usb_serial_port *port = serial->port[0]; struct ftdi_private *priv; struct ftdi_sio_quirk *quirk; - + int retval; + dbg("%s",__FUNCTION__); priv = kzalloc(sizeof(struct ftdi_private), GFP_KERNEL); @@ -1203,15 +1208,18 @@ static int ftdi_sio_attach (struct usb_serial *serial) usb_set_serial_port_data(serial->port[0], priv); ftdi_determine_type (serial->port[0]); - create_sysfs_attrs(serial); + retval = create_sysfs_attrs(serial); + if (retval) + dev_err(&serial->dev->dev, "Error creating sysfs files, " + "continuing\n"); /* Check for device requiring special set up. */ quirk = (struct ftdi_sio_quirk *)usb_get_serial_data(serial); if (quirk && quirk->setup) { quirk->setup(serial); } - - return (0); + + return 0; } /* ftdi_sio_attach */ diff --git a/drivers/usb/serial/garmin_gps.c b/drivers/usb/serial/garmin_gps.c index 727852634be..4b1196a8b09 100644 --- a/drivers/usb/serial/garmin_gps.c +++ b/drivers/usb/serial/garmin_gps.c @@ -1,7 +1,7 @@ /* * Garmin GPS driver * - * Copyright (C) 2004 Hermann Kneissel herkne@users.sourceforge.net + * Copyright (C) 2006 Hermann Kneissel herkne@users.sourceforge.net * * The latest version of the driver can be found at * http://sourceforge.net/projects/garmin-gps/ @@ -37,6 +37,8 @@ #include <linux/usb.h> #include <linux/usb/serial.h> +#include <linux/version.h> + /* the mode to be set when the port ist opened */ static int initial_mode = 1; @@ -50,7 +52,7 @@ static int debug = 0; */ #define VERSION_MAJOR 0 -#define VERSION_MINOR 23 +#define VERSION_MINOR 28 #define _STR(s) #s #define _DRIVER_VERSION(a,b) "v" _STR(a) "." _STR(b) @@ -164,7 +166,8 @@ struct garmin_data { #define FLAGS_SESSION_REPLY1_SEEN 0x0080 #define FLAGS_SESSION_REPLY2_SEEN 0x0040 #define FLAGS_BULK_IN_ACTIVE 0x0020 -#define FLAGS_THROTTLED 0x0010 +#define FLAGS_BULK_IN_RESTART 0x0010 +#define FLAGS_THROTTLED 0x0008 #define CLEAR_HALT_REQUIRED 0x0001 #define FLAGS_QUEUING 0x0100 @@ -224,7 +227,7 @@ static struct usb_driver garmin_driver = { .probe = usb_serial_probe, .disconnect = usb_serial_disconnect, .id_table = id_table, - .no_dynamic_id = 1, + .no_dynamic_id = 1, }; @@ -270,7 +273,7 @@ static inline int isAbortTrfCmnd(const unsigned char *buf) static void send_to_tty(struct usb_serial_port *port, - char *data, unsigned int actual_length) + char *data, unsigned int actual_length) { struct tty_struct *tty = port->tty; @@ -294,15 +297,15 @@ static void send_to_tty(struct usb_serial_port *port, * queue a received (usb-)packet for later processing */ static int pkt_add(struct garmin_data * garmin_data_p, - unsigned char *data, unsigned int data_length) + unsigned char *data, unsigned int data_length) { + int state = 0; int result = 0; unsigned long flags; struct garmin_packet *pkt; /* process only packets containg data ... */ if (data_length) { - garmin_data_p->flags |= FLAGS_QUEUING; pkt = kmalloc(sizeof(struct garmin_packet)+data_length, GFP_ATOMIC); if (pkt == NULL) { @@ -313,14 +316,16 @@ static int pkt_add(struct garmin_data * garmin_data_p, memcpy(pkt->data, data, data_length); spin_lock_irqsave(&garmin_data_p->lock, flags); + garmin_data_p->flags |= FLAGS_QUEUING; result = list_empty(&garmin_data_p->pktlist); pkt->seq = garmin_data_p->seq_counter++; list_add_tail(&pkt->list, &garmin_data_p->pktlist); + state = garmin_data_p->state; spin_unlock_irqrestore(&garmin_data_p->lock, flags); /* in serial mode, if someone is waiting for data from the device, iconvert and send the next packet to tty. */ - if (result && (garmin_data_p->state == STATE_GSP_WAIT_DATA)) { + if (result && (state == STATE_GSP_WAIT_DATA)) { gsp_next_packet(garmin_data_p); } } @@ -370,9 +375,9 @@ static void pkt_clear(struct garmin_data * garmin_data_p) static int gsp_send_ack(struct garmin_data * garmin_data_p, __u8 pkt_id) { __u8 pkt[10]; - __u8 cksum = 0; - __u8 *ptr = pkt; - unsigned l = 0; + __u8 cksum = 0; + __u8 *ptr = pkt; + unsigned l = 0; dbg("%s - pkt-id: 0x%X.", __FUNCTION__, 0xFF & pkt_id); @@ -416,7 +421,7 @@ static int gsp_send_ack(struct garmin_data * garmin_data_p, __u8 pkt_id) static int gsp_rec_packet(struct garmin_data * garmin_data_p, int count) { const __u8* recpkt = garmin_data_p->inbuffer+GSP_INITIAL_OFFSET; - __le32 *usbdata = (__le32 *) garmin_data_p->inbuffer; + __le32 *usbdata = (__le32 *) garmin_data_p->inbuffer; int cksum = 0; int n = 0; @@ -447,11 +452,11 @@ static int gsp_rec_packet(struct garmin_data * garmin_data_p, int count) n++; } - if ((0xff & (cksum + *recpkt)) != 0) { - dbg("%s - invalid checksum, expected %02x, got %02x", - __FUNCTION__, 0xff & -cksum, 0xff & *recpkt); - return -EINVPKT; - } + if ((0xff & (cksum + *recpkt)) != 0) { + dbg("%s - invalid checksum, expected %02x, got %02x", + __FUNCTION__, 0xff & -cksum, 0xff & *recpkt); + return -EINVPKT; + } usbdata[0] = __cpu_to_le32(GARMIN_LAYERID_APPL); usbdata[1] = __cpu_to_le32(pktid); @@ -491,20 +496,28 @@ static int gsp_rec_packet(struct garmin_data * garmin_data_p, int count) */ static int gsp_receive(struct garmin_data * garmin_data_p, - const unsigned char *buf, int count) + const unsigned char *buf, int count) { + unsigned long flags; int offs = 0; int ack_or_nak_seen = 0; int i = 0; - __u8 *dest = garmin_data_p->inbuffer; - int size = garmin_data_p->insize; + __u8 *dest; + int size; // dleSeen: set if last byte read was a DLE - int dleSeen = garmin_data_p->flags & FLAGS_GSP_DLESEEN; + int dleSeen; // skip: if set, skip incoming data until possible start of // new packet - int skip = garmin_data_p->flags & FLAGS_GSP_SKIP; + int skip; __u8 data; + spin_lock_irqsave(&garmin_data_p->lock, flags); + dest = garmin_data_p->inbuffer; + size = garmin_data_p->insize; + dleSeen = garmin_data_p->flags & FLAGS_GSP_DLESEEN; + skip = garmin_data_p->flags & FLAGS_GSP_SKIP; + spin_unlock_irqrestore(&garmin_data_p->lock, flags); + dbg("%s - dle=%d skip=%d size=%d count=%d", __FUNCTION__, dleSeen, skip, size, count); @@ -572,6 +585,8 @@ static int gsp_receive(struct garmin_data * garmin_data_p, } } + spin_lock_irqsave(&garmin_data_p->lock, flags); + garmin_data_p->insize = size; // copy flags back to structure @@ -587,6 +602,11 @@ static int gsp_receive(struct garmin_data * garmin_data_p, if (ack_or_nak_seen) { garmin_data_p->state = STATE_GSP_WAIT_DATA; + } + + spin_unlock_irqrestore(&garmin_data_p->lock, flags); + + if (ack_or_nak_seen) { gsp_next_packet(garmin_data_p); } @@ -676,7 +696,7 @@ static int gsp_send(struct garmin_data * garmin_data_p, src = garmin_data_p->outbuffer+GARMIN_PKTHDR_LENGTH; if (k > (GARMIN_PKTHDR_LENGTH-2)) { /* can't add stuffing DLEs in place, move data to end - of buffer ... */ + of buffer ... */ dst = garmin_data_p->outbuffer+GPS_OUT_BUFSIZ-datalen; memcpy(dst, src, datalen); src = dst; @@ -755,8 +775,9 @@ static void gsp_next_packet(struct garmin_data * garmin_data_p) * or even incomplete packets */ static int nat_receive(struct garmin_data * garmin_data_p, - const unsigned char *buf, int count) + const unsigned char *buf, int count) { + unsigned long flags; __u8 * dest; int offs = 0; int result = count; @@ -803,7 +824,9 @@ static int nat_receive(struct garmin_data * garmin_data_p, /* if this was an abort-transfer command, flush all queued data. */ if (isAbortTrfCmnd(garmin_data_p->inbuffer)) { + spin_lock_irqsave(&garmin_data_p->lock, flags); garmin_data_p->flags |= FLAGS_DROP_DATA; + spin_unlock_irqrestore(&garmin_data_p->lock, flags); pkt_clear(garmin_data_p); } } @@ -839,12 +862,15 @@ static void priv_status_resp(struct usb_serial_port *port) static int process_resetdev_request(struct usb_serial_port *port) { + unsigned long flags; int status; struct garmin_data * garmin_data_p = usb_get_serial_port_data(port); + spin_lock_irqsave(&garmin_data_p->lock, flags); garmin_data_p->flags &= ~(CLEAR_HALT_REQUIRED); garmin_data_p->state = STATE_RESET; garmin_data_p->serial_num = 0; + spin_unlock_irqrestore(&garmin_data_p->lock, flags); usb_kill_urb (port->interrupt_in_urb); dbg("%s - usb_reset_device", __FUNCTION__ ); @@ -862,6 +888,7 @@ static int process_resetdev_request(struct usb_serial_port *port) */ static int garmin_clear(struct garmin_data * garmin_data_p) { + unsigned long flags; int status = 0; struct usb_serial_port *port = garmin_data_p->port; @@ -875,8 +902,10 @@ static int garmin_clear(struct garmin_data * garmin_data_p) /* flush all queued data */ pkt_clear(garmin_data_p); + spin_lock_irqsave(&garmin_data_p->lock, flags); garmin_data_p->insize = 0; garmin_data_p->outsize = 0; + spin_unlock_irqrestore(&garmin_data_p->lock, flags); return status; } @@ -888,6 +917,7 @@ static int garmin_clear(struct garmin_data * garmin_data_p) static int garmin_init_session(struct usb_serial_port *port) { + unsigned long flags; struct usb_serial *serial = port->serial; struct garmin_data * garmin_data_p = usb_get_serial_port_data(port); int status = 0; @@ -913,7 +943,9 @@ static int garmin_init_session(struct usb_serial_port *port) if (status >= 0) { + spin_lock_irqsave(&garmin_data_p->lock, flags); garmin_data_p->ignorePkts++; + spin_unlock_irqrestore(&garmin_data_p->lock, flags); /* not needed, but the win32 driver does it too ... */ status = garmin_write_bulk(port, @@ -921,7 +953,9 @@ static int garmin_init_session(struct usb_serial_port *port) sizeof(GARMIN_START_SESSION_REQ2)); if (status >= 0) { status = 0; + spin_lock_irqsave(&garmin_data_p->lock, flags); garmin_data_p->ignorePkts++; + spin_unlock_irqrestore(&garmin_data_p->lock, flags); } } } @@ -935,6 +969,7 @@ static int garmin_init_session(struct usb_serial_port *port) static int garmin_open (struct usb_serial_port *port, struct file *filp) { + unsigned long flags; int status = 0; struct garmin_data * garmin_data_p = usb_get_serial_port_data(port); @@ -948,9 +983,11 @@ static int garmin_open (struct usb_serial_port *port, struct file *filp) if (port->tty) port->tty->low_latency = 1; + spin_lock_irqsave(&garmin_data_p->lock, flags); garmin_data_p->mode = initial_mode; garmin_data_p->count = 0; garmin_data_p->flags = 0; + spin_unlock_irqrestore(&garmin_data_p->lock, flags); /* shutdown any bulk reads that might be going on */ usb_kill_urb (port->write_urb); @@ -996,6 +1033,7 @@ static void garmin_close (struct usb_serial_port *port, struct file * filp) static void garmin_write_bulk_callback (struct urb *urb, struct pt_regs *regs) { + unsigned long flags; struct usb_serial_port *port = (struct usb_serial_port *)urb->context; struct garmin_data * garmin_data_p = usb_get_serial_port_data(port); @@ -1007,7 +1045,9 @@ static void garmin_write_bulk_callback (struct urb *urb, struct pt_regs *regs) if (urb->status) { dbg("%s - nonzero write bulk status received: %d", __FUNCTION__, urb->status); + spin_lock_irqsave(&garmin_data_p->lock, flags); garmin_data_p->flags |= CLEAR_HALT_REQUIRED; + spin_unlock_irqrestore(&garmin_data_p->lock, flags); } usb_serial_port_softint(port); @@ -1015,8 +1055,9 @@ static void garmin_write_bulk_callback (struct urb *urb, struct pt_regs *regs) static int garmin_write_bulk (struct usb_serial_port *port, - const unsigned char *buf, int count) + const unsigned char *buf, int count) { + unsigned long flags; struct usb_serial *serial = port->serial; struct garmin_data * garmin_data_p = usb_get_serial_port_data(port); struct urb *urb; @@ -1026,7 +1067,9 @@ static int garmin_write_bulk (struct usb_serial_port *port, dbg("%s - port %d, state %d", __FUNCTION__, port->number, garmin_data_p->state); + spin_lock_irqsave(&garmin_data_p->lock, flags); garmin_data_p->flags &= ~FLAGS_DROP_DATA; + spin_unlock_irqrestore(&garmin_data_p->lock, flags); buffer = kmalloc (count, GFP_ATOMIC); if (!buffer) { @@ -1053,7 +1096,9 @@ static int garmin_write_bulk (struct usb_serial_port *port, urb->transfer_flags |= URB_ZERO_PACKET; if (GARMIN_LAYERID_APPL == getLayerId(buffer)) { + spin_lock_irqsave(&garmin_data_p->lock, flags); garmin_data_p->flags |= FLAGS_APP_REQ_SEEN; + spin_unlock_irqrestore(&garmin_data_p->lock, flags); if (garmin_data_p->mode == MODE_GARMIN_SERIAL) { pkt_clear(garmin_data_p); garmin_data_p->state = STATE_GSP_WAIT_DATA; @@ -1087,8 +1132,9 @@ static int garmin_write_bulk (struct usb_serial_port *port, static int garmin_write (struct usb_serial_port *port, - const unsigned char *buf, int count) + const unsigned char *buf, int count) { + unsigned long flags; int pktid, pktsiz, len; struct garmin_data * garmin_data_p = usb_get_serial_port_data(port); __le32 *privpkt = (__le32 *)garmin_data_p->privpkt; @@ -1139,7 +1185,9 @@ static int garmin_write (struct usb_serial_port *port, break; case PRIV_PKTID_RESET_REQ: + spin_lock_irqsave(&garmin_data_p->lock, flags); garmin_data_p->flags |= FLAGS_APP_REQ_SEEN; + spin_unlock_irqrestore(&garmin_data_p->lock, flags); break; case PRIV_PKTID_SET_DEF_MODE: @@ -1155,6 +1203,8 @@ static int garmin_write (struct usb_serial_port *port, } } + garmin_data_p->ignorePkts = 0; + if (garmin_data_p->mode == MODE_GARMIN_SERIAL) { return gsp_receive(garmin_data_p, buf, count); } else { /* MODE_NATIVE */ @@ -1177,10 +1227,10 @@ static int garmin_chars_in_buffer (struct usb_serial_port *port) { /* * Report back the number of bytes currently in our input buffer. - * Will this lock up the driver - the buffer contains an incomplete - * package which will not be written to the device until it - * has been completed ? - */ + * Will this lock up the driver - the buffer contains an incomplete + * package which will not be written to the device until it + * has been completed ? + */ //struct garmin_data * garmin_data_p = usb_get_serial_port_data(port); //return garmin_data_p->insize; return 0; @@ -1190,6 +1240,8 @@ static int garmin_chars_in_buffer (struct usb_serial_port *port) static void garmin_read_process(struct garmin_data * garmin_data_p, unsigned char *data, unsigned data_length) { + unsigned long flags; + if (garmin_data_p->flags & FLAGS_DROP_DATA) { /* abort-transfer cmd is actice */ dbg("%s - pkt dropped", __FUNCTION__); @@ -1200,11 +1252,14 @@ static void garmin_read_process(struct garmin_data * garmin_data_p, if a reset is required or not when closing the device */ if (0 == memcmp(data, GARMIN_APP_LAYER_REPLY, - sizeof(GARMIN_APP_LAYER_REPLY))) + sizeof(GARMIN_APP_LAYER_REPLY))) { + spin_lock_irqsave(&garmin_data_p->lock, flags); garmin_data_p->flags |= FLAGS_APP_RESP_SEEN; + spin_unlock_irqrestore(&garmin_data_p->lock, flags); + } /* if throttling is active or postprecessing is required - put the received data in th input queue, otherwise + put the received data in the input queue, otherwise send it directly to the tty port */ if (garmin_data_p->flags & FLAGS_QUEUING) { pkt_add(garmin_data_p, data, data_length); @@ -1221,6 +1276,7 @@ static void garmin_read_process(struct garmin_data * garmin_data_p, static void garmin_read_bulk_callback (struct urb *urb, struct pt_regs *regs) { + unsigned long flags; struct usb_serial_port *port = (struct usb_serial_port *)urb->context; struct usb_serial *serial = port->serial; struct garmin_data * garmin_data_p = usb_get_serial_port_data(port); @@ -1245,19 +1301,30 @@ static void garmin_read_bulk_callback (struct urb *urb, struct pt_regs *regs) garmin_read_process(garmin_data_p, data, urb->actual_length); - /* Continue trying to read until nothing more is received */ - if (urb->actual_length > 0) { - usb_fill_bulk_urb (port->read_urb, serial->dev, - usb_rcvbulkpipe (serial->dev, - port->bulk_in_endpointAddress), - port->read_urb->transfer_buffer, - port->read_urb->transfer_buffer_length, - garmin_read_bulk_callback, port); + if (urb->actual_length == 0 && + 0 != (garmin_data_p->flags & FLAGS_BULK_IN_RESTART)) { + spin_lock_irqsave(&garmin_data_p->lock, flags); + garmin_data_p->flags &= ~FLAGS_BULK_IN_RESTART; + spin_unlock_irqrestore(&garmin_data_p->lock, flags); status = usb_submit_urb(port->read_urb, GFP_ATOMIC); if (status) dev_err(&port->dev, "%s - failed resubmitting read urb, error %d\n", __FUNCTION__, status); + } else if (urb->actual_length > 0) { + /* Continue trying to read until nothing more is received */ + if (0 == (garmin_data_p->flags & FLAGS_THROTTLED)) { + status = usb_submit_urb(port->read_urb, GFP_ATOMIC); + if (status) + dev_err(&port->dev, + "%s - failed resubmitting read urb, error %d\n", + __FUNCTION__, status); + } + } else { + dbg("%s - end of bulk data", __FUNCTION__); + spin_lock_irqsave(&garmin_data_p->lock, flags); + garmin_data_p->flags &= ~FLAGS_BULK_IN_ACTIVE; + spin_unlock_irqrestore(&garmin_data_p->lock, flags); } return; } @@ -1265,6 +1332,7 @@ static void garmin_read_bulk_callback (struct urb *urb, struct pt_regs *regs) static void garmin_read_int_callback (struct urb *urb, struct pt_regs *regs) { + unsigned long flags; int status; struct usb_serial_port *port = (struct usb_serial_port *)urb->context; struct usb_serial *serial = port->serial; @@ -1297,25 +1365,41 @@ static void garmin_read_int_callback (struct urb *urb, struct pt_regs *regs) dbg("%s - bulk data available.", __FUNCTION__); - /* bulk data available */ - usb_fill_bulk_urb (port->read_urb, serial->dev, - usb_rcvbulkpipe (serial->dev, - port->bulk_in_endpointAddress), - port->read_urb->transfer_buffer, - port->read_urb->transfer_buffer_length, - garmin_read_bulk_callback, port); - status = usb_submit_urb(port->read_urb, GFP_KERNEL); - if (status) { - dev_err(&port->dev, - "%s - failed submitting read urb, error %d\n", - __FUNCTION__, status); + if (0 == (garmin_data_p->flags & FLAGS_BULK_IN_ACTIVE)) { + + /* bulk data available */ + usb_fill_bulk_urb (port->read_urb, serial->dev, + usb_rcvbulkpipe (serial->dev, + port->bulk_in_endpointAddress), + port->read_urb->transfer_buffer, + port->read_urb->transfer_buffer_length, + garmin_read_bulk_callback, port); + status = usb_submit_urb(port->read_urb, GFP_ATOMIC); + if (status) { + dev_err(&port->dev, + "%s - failed submitting read urb, error %d\n", + __FUNCTION__, status); + } else { + spin_lock_irqsave(&garmin_data_p->lock, flags); + garmin_data_p->flags |= FLAGS_BULK_IN_ACTIVE; + /* do not send this packet to the user */ + garmin_data_p->ignorePkts = 1; + spin_unlock_irqrestore(&garmin_data_p->lock, flags); + } + } else { + /* bulk-in transfer still active */ + spin_lock_irqsave(&garmin_data_p->lock, flags); + garmin_data_p->flags |= FLAGS_BULK_IN_RESTART; + spin_unlock_irqrestore(&garmin_data_p->lock, flags); } } else if (urb->actual_length == (4+sizeof(GARMIN_START_SESSION_REPLY)) && 0 == memcmp(data, GARMIN_START_SESSION_REPLY, sizeof(GARMIN_START_SESSION_REPLY))) { + spin_lock_irqsave(&garmin_data_p->lock, flags); garmin_data_p->flags |= FLAGS_SESSION_REPLY1_SEEN; + spin_unlock_irqrestore(&garmin_data_p->lock, flags); /* save the serial number */ garmin_data_p->serial_num @@ -1330,7 +1414,9 @@ static void garmin_read_int_callback (struct urb *urb, struct pt_regs *regs) ignore it. */ dbg("%s - pkt ignored (%d)", __FUNCTION__, garmin_data_p->ignorePkts); + spin_lock_irqsave(&garmin_data_p->lock, flags); garmin_data_p->ignorePkts--; + spin_unlock_irqrestore(&garmin_data_p->lock, flags); } else { garmin_read_process(garmin_data_p, data, urb->actual_length); } @@ -1351,18 +1437,20 @@ static void garmin_read_int_callback (struct urb *urb, struct pt_regs *regs) */ static int garmin_flush_queue(struct garmin_data * garmin_data_p) { + unsigned long flags; struct garmin_packet *pkt; if ((garmin_data_p->flags & FLAGS_THROTTLED) == 0) { pkt = pkt_pop(garmin_data_p); if (pkt != NULL) { - send_to_tty(garmin_data_p->port, pkt->data, pkt->size); kfree(pkt); mod_timer(&garmin_data_p->timer, (1)+jiffies); } else { + spin_lock_irqsave(&garmin_data_p->lock, flags); garmin_data_p->flags &= ~FLAGS_QUEUING; + spin_unlock_irqrestore(&garmin_data_p->lock, flags); } } return 0; @@ -1371,26 +1459,41 @@ static int garmin_flush_queue(struct garmin_data * garmin_data_p) static void garmin_throttle (struct usb_serial_port *port) { + unsigned long flags; struct garmin_data * garmin_data_p = usb_get_serial_port_data(port); dbg("%s - port %d", __FUNCTION__, port->number); /* set flag, data received will be put into a queue for later processing */ + spin_lock_irqsave(&garmin_data_p->lock, flags); garmin_data_p->flags |= FLAGS_QUEUING|FLAGS_THROTTLED; + spin_unlock_irqrestore(&garmin_data_p->lock, flags); } static void garmin_unthrottle (struct usb_serial_port *port) { + unsigned long flags; struct garmin_data * garmin_data_p = usb_get_serial_port_data(port); + int status; dbg("%s - port %d", __FUNCTION__, port->number); + spin_lock_irqsave(&garmin_data_p->lock, flags); garmin_data_p->flags &= ~FLAGS_THROTTLED; + spin_unlock_irqrestore(&garmin_data_p->lock, flags); /* in native mode send queued data to tty, in serial mode nothing needs to be done here */ if (garmin_data_p->mode == MODE_NATIVE) garmin_flush_queue(garmin_data_p); + + if (0 != (garmin_data_p->flags & FLAGS_BULK_IN_ACTIVE)) { + status = usb_submit_urb(port->read_urb, GFP_ATOMIC); + if (status) + dev_err(&port->dev, + "%s - failed resubmitting read urb, error %d\n", + __FUNCTION__, status); + } } @@ -1420,11 +1523,12 @@ static int garmin_attach (struct usb_serial *serial) dbg("%s", __FUNCTION__); - garmin_data_p = kzalloc(sizeof(struct garmin_data), GFP_KERNEL); + garmin_data_p = kmalloc (sizeof(struct garmin_data), GFP_KERNEL); if (garmin_data_p == NULL) { dev_err(&port->dev, "%s - Out of memory\n", __FUNCTION__); return -ENOMEM; } + memset (garmin_data_p, 0, sizeof(struct garmin_data)); init_timer(&garmin_data_p->timer); spin_lock_init(&garmin_data_p->lock); INIT_LIST_HEAD(&garmin_data_p->pktlist); @@ -1459,10 +1563,10 @@ static void garmin_shutdown (struct usb_serial *serial) /* All of the device info needed */ static struct usb_serial_driver garmin_device = { .driver = { - .owner = THIS_MODULE, - .name = "garmin_gps", + .owner = THIS_MODULE, + .name = "garmin_gps", }, - .description = "Garmin GPS usb/tty", + .description = "Garmin GPS usb/tty", .id_table = id_table, .num_interrupt_in = 1, .num_bulk_in = 1, @@ -1483,6 +1587,7 @@ static struct usb_serial_driver garmin_device = { }; + static int __init garmin_init (void) { int retval; diff --git a/drivers/usb/serial/ipaq.c b/drivers/usb/serial/ipaq.c index 9840bade79f..bfc6998cd16 100644 --- a/drivers/usb/serial/ipaq.c +++ b/drivers/usb/serial/ipaq.c @@ -652,11 +652,6 @@ static int ipaq_open(struct usb_serial_port *port, struct file *filp) port->bulk_out_size = port->write_urb->transfer_buffer_length = URBDATA_SIZE; msleep(1000*initial_wait); - /* Start reading from the device */ - usb_fill_bulk_urb(port->read_urb, serial->dev, - usb_rcvbulkpipe(serial->dev, port->bulk_in_endpointAddress), - port->read_urb->transfer_buffer, port->read_urb->transfer_buffer_length, - ipaq_read_bulk_callback, port); /* * Send out control message observed in win98 sniffs. Not sure what @@ -670,18 +665,31 @@ static int ipaq_open(struct usb_serial_port *port, struct file *filp) result = usb_control_msg(serial->dev, usb_sndctrlpipe(serial->dev, 0), 0x22, 0x21, 0x1, 0, NULL, 0, 100); - if (result == 0) { - result = usb_submit_urb(port->read_urb, GFP_KERNEL); - if (result) { - err("%s - failed submitting read urb, error %d", __FUNCTION__, result); - goto error; - } - return 0; - } + if (!result) + break; + msleep(1000); } - err("%s - failed doing control urb, error %d", __FUNCTION__, result); - goto error; + + if (!retries && result) { + err("%s - failed doing control urb, error %d", __FUNCTION__, + result); + goto error; + } + + /* Start reading from the device */ + usb_fill_bulk_urb(port->read_urb, serial->dev, + usb_rcvbulkpipe(serial->dev, port->bulk_in_endpointAddress), + port->read_urb->transfer_buffer, port->read_urb->transfer_buffer_length, + ipaq_read_bulk_callback, port); + + result = usb_submit_urb(port->read_urb, GFP_KERNEL); + if (result) { + err("%s - failed submitting read urb, error %d", __FUNCTION__, result); + goto error; + } + + return 0; enomem: result = -ENOMEM; diff --git a/drivers/usb/serial/mos7840.c b/drivers/usb/serial/mos7840.c new file mode 100644 index 00000000000..95bf57166c5 --- /dev/null +++ b/drivers/usb/serial/mos7840.c @@ -0,0 +1,2962 @@ +/* + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + * + * Clean ups from Moschip version and a few ioctl implementations by: + * Paul B Schroeder <pschroeder "at" uplogix "dot" com> + * + * Originally based on drivers/usb/serial/io_edgeport.c which is: + * Copyright (C) 2000 Inside Out Networks, All rights reserved. + * Copyright (C) 2001-2002 Greg Kroah-Hartman <greg@kroah.com> + * + */ + +#include <linux/kernel.h> +#include <linux/errno.h> +#include <linux/init.h> +#include <linux/slab.h> +#include <linux/tty.h> +#include <linux/tty_driver.h> +#include <linux/tty_flip.h> +#include <linux/module.h> +#include <linux/serial.h> +#include <linux/usb.h> +#include <linux/usb/serial.h> +#include <asm/uaccess.h> + +/* + * Version Information + */ +#define DRIVER_VERSION "1.3.1" +#define DRIVER_DESC "Moschip 7840/7820 USB Serial Driver" + +/* + * 16C50 UART register defines + */ + +#define LCR_BITS_5 0x00 /* 5 bits/char */ +#define LCR_BITS_6 0x01 /* 6 bits/char */ +#define LCR_BITS_7 0x02 /* 7 bits/char */ +#define LCR_BITS_8 0x03 /* 8 bits/char */ +#define LCR_BITS_MASK 0x03 /* Mask for bits/char field */ + +#define LCR_STOP_1 0x00 /* 1 stop bit */ +#define LCR_STOP_1_5 0x04 /* 1.5 stop bits (if 5 bits/char) */ +#define LCR_STOP_2 0x04 /* 2 stop bits (if 6-8 bits/char) */ +#define LCR_STOP_MASK 0x04 /* Mask for stop bits field */ + +#define LCR_PAR_NONE 0x00 /* No parity */ +#define LCR_PAR_ODD 0x08 /* Odd parity */ +#define LCR_PAR_EVEN 0x18 /* Even parity */ +#define LCR_PAR_MARK 0x28 /* Force parity bit to 1 */ +#define LCR_PAR_SPACE 0x38 /* Force parity bit to 0 */ +#define LCR_PAR_MASK 0x38 /* Mask for parity field */ + +#define LCR_SET_BREAK 0x40 /* Set Break condition */ +#define LCR_DL_ENABLE 0x80 /* Enable access to divisor latch */ + +#define MCR_DTR 0x01 /* Assert DTR */ +#define MCR_RTS 0x02 /* Assert RTS */ +#define MCR_OUT1 0x04 /* Loopback only: Sets state of RI */ +#define MCR_MASTER_IE 0x08 /* Enable interrupt outputs */ +#define MCR_LOOPBACK 0x10 /* Set internal (digital) loopback mode */ +#define MCR_XON_ANY 0x20 /* Enable any char to exit XOFF mode */ + +#define MOS7840_MSR_CTS 0x10 /* Current state of CTS */ +#define MOS7840_MSR_DSR 0x20 /* Current state of DSR */ +#define MOS7840_MSR_RI 0x40 /* Current state of RI */ +#define MOS7840_MSR_CD 0x80 /* Current state of CD */ + +/* + * Defines used for sending commands to port + */ + +#define WAIT_FOR_EVER (HZ * 0 ) /* timeout urb is wait for ever */ +#define MOS_WDR_TIMEOUT (HZ * 5 ) /* default urb timeout */ + +#define MOS_PORT1 0x0200 +#define MOS_PORT2 0x0300 +#define MOS_VENREG 0x0000 +#define MOS_MAX_PORT 0x02 +#define MOS_WRITE 0x0E +#define MOS_READ 0x0D + +/* Requests */ +#define MCS_RD_RTYPE 0xC0 +#define MCS_WR_RTYPE 0x40 +#define MCS_RDREQ 0x0D +#define MCS_WRREQ 0x0E +#define MCS_CTRL_TIMEOUT 500 +#define VENDOR_READ_LENGTH (0x01) + +#define MAX_NAME_LEN 64 + +#define ZLP_REG1 0x3A //Zero_Flag_Reg1 58 +#define ZLP_REG5 0x3E //Zero_Flag_Reg5 62 + +/* For higher baud Rates use TIOCEXBAUD */ +#define TIOCEXBAUD 0x5462 + +/* vendor id and device id defines */ + +#define USB_VENDOR_ID_MOSCHIP 0x9710 +#define MOSCHIP_DEVICE_ID_7840 0x7840 +#define MOSCHIP_DEVICE_ID_7820 0x7820 + +/* Interrupt Rotinue Defines */ + +#define SERIAL_IIR_RLS 0x06 +#define SERIAL_IIR_MS 0x00 + +/* + * Emulation of the bit mask on the LINE STATUS REGISTER. + */ +#define SERIAL_LSR_DR 0x0001 +#define SERIAL_LSR_OE 0x0002 +#define SERIAL_LSR_PE 0x0004 +#define SERIAL_LSR_FE 0x0008 +#define SERIAL_LSR_BI 0x0010 + +#define MOS_MSR_DELTA_CTS 0x10 +#define MOS_MSR_DELTA_DSR 0x20 +#define MOS_MSR_DELTA_RI 0x40 +#define MOS_MSR_DELTA_CD 0x80 + +// Serial Port register Address +#define INTERRUPT_ENABLE_REGISTER ((__u16)(0x01)) +#define FIFO_CONTROL_REGISTER ((__u16)(0x02)) +#define LINE_CONTROL_REGISTER ((__u16)(0x03)) +#define MODEM_CONTROL_REGISTER ((__u16)(0x04)) +#define LINE_STATUS_REGISTER ((__u16)(0x05)) +#define MODEM_STATUS_REGISTER ((__u16)(0x06)) +#define SCRATCH_PAD_REGISTER ((__u16)(0x07)) +#define DIVISOR_LATCH_LSB ((__u16)(0x00)) +#define DIVISOR_LATCH_MSB ((__u16)(0x01)) + +#define CLK_MULTI_REGISTER ((__u16)(0x02)) +#define CLK_START_VALUE_REGISTER ((__u16)(0x03)) + +#define SERIAL_LCR_DLAB ((__u16)(0x0080)) + +/* + * URB POOL related defines + */ +#define NUM_URBS 16 /* URB Count */ +#define URB_TRANSFER_BUFFER_SIZE 32 /* URB Size */ + + +static struct usb_device_id moschip_port_id_table[] = { + {USB_DEVICE(USB_VENDOR_ID_MOSCHIP, MOSCHIP_DEVICE_ID_7840)}, + {USB_DEVICE(USB_VENDOR_ID_MOSCHIP, MOSCHIP_DEVICE_ID_7820)}, + {} /* terminating entry */ +}; + +static __devinitdata struct usb_device_id moschip_id_table_combined[] = { + {USB_DEVICE(USB_VENDOR_ID_MOSCHIP, MOSCHIP_DEVICE_ID_7840)}, + {USB_DEVICE(USB_VENDOR_ID_MOSCHIP, MOSCHIP_DEVICE_ID_7820)}, + {} /* terminating entry */ +}; + +MODULE_DEVICE_TABLE(usb, moschip_id_table_combined); + +/* This structure holds all of the local port information */ + +struct moschip_port { + int port_num; /*Actual port number in the device(1,2,etc) */ + struct urb *write_urb; /* write URB for this port */ + struct urb *read_urb; /* read URB for this port */ + __u8 shadowLCR; /* last LCR value received */ + __u8 shadowMCR; /* last MCR value received */ + char open; + wait_queue_head_t wait_chase; /* for handling sleeping while waiting for chase to finish */ + wait_queue_head_t delta_msr_wait; /* for handling sleeping while waiting for msr change to happen */ + int delta_msr_cond; + struct async_icount icount; + struct usb_serial_port *port; /* loop back to the owner of this object */ + + /*Offsets */ + __u8 SpRegOffset; + __u8 ControlRegOffset; + __u8 DcrRegOffset; + //for processing control URBS in interrupt context + struct urb *control_urb; + char *ctrl_buf; + int MsrLsr; + + struct urb *write_urb_pool[NUM_URBS]; +}; + + +static int debug; +static int mos7840_num_ports; //this says the number of ports in the device +static int mos7840_num_open_ports; + + +/* + * mos7840_set_reg_sync + * To set the Control register by calling usb_fill_control_urb function + * by passing usb_sndctrlpipe function as parameter. + */ + +static int mos7840_set_reg_sync(struct usb_serial_port *port, __u16 reg, + __u16 val) +{ + struct usb_device *dev = port->serial->dev; + val = val & 0x00ff; + dbg("mos7840_set_reg_sync offset is %x, value %x\n", reg, val); + + return usb_control_msg(dev, usb_sndctrlpipe(dev, 0), MCS_WRREQ, + MCS_WR_RTYPE, val, reg, NULL, 0, + MOS_WDR_TIMEOUT); +} + +/* + * mos7840_get_reg_sync + * To set the Uart register by calling usb_fill_control_urb function by + * passing usb_rcvctrlpipe function as parameter. + */ + +static int mos7840_get_reg_sync(struct usb_serial_port *port, __u16 reg, + __u16 * val) +{ + struct usb_device *dev = port->serial->dev; + int ret = 0; + + ret = usb_control_msg(dev, usb_rcvctrlpipe(dev, 0), MCS_RDREQ, + MCS_RD_RTYPE, 0, reg, val, VENDOR_READ_LENGTH, + MOS_WDR_TIMEOUT); + dbg("mos7840_get_reg_sync offset is %x, return val %x\n", reg, *val); + *val = (*val) & 0x00ff; + return ret; +} + +/* + * mos7840_set_uart_reg + * To set the Uart register by calling usb_fill_control_urb function by + * passing usb_sndctrlpipe function as parameter. + */ + +static int mos7840_set_uart_reg(struct usb_serial_port *port, __u16 reg, + __u16 val) +{ + + struct usb_device *dev = port->serial->dev; + val = val & 0x00ff; + // For the UART control registers, the application number need to be Or'ed + if (mos7840_num_ports == 4) { + val |= + (((__u16) port->number - (__u16) (port->serial->minor)) + + 1) << 8; + dbg("mos7840_set_uart_reg application number is %x\n", val); + } else { + if (((__u16) port->number - (__u16) (port->serial->minor)) == 0) { + val |= + (((__u16) port->number - + (__u16) (port->serial->minor)) + 1) << 8; + dbg("mos7840_set_uart_reg application number is %x\n", + val); + } else { + val |= + (((__u16) port->number - + (__u16) (port->serial->minor)) + 2) << 8; + dbg("mos7840_set_uart_reg application number is %x\n", + val); + } + } + return usb_control_msg(dev, usb_sndctrlpipe(dev, 0), MCS_WRREQ, + MCS_WR_RTYPE, val, reg, NULL, 0, + MOS_WDR_TIMEOUT); + +} + +/* + * mos7840_get_uart_reg + * To set the Control register by calling usb_fill_control_urb function + * by passing usb_rcvctrlpipe function as parameter. + */ +static int mos7840_get_uart_reg(struct usb_serial_port *port, __u16 reg, + __u16 * val) +{ + struct usb_device *dev = port->serial->dev; + int ret = 0; + __u16 Wval; + + //dbg("application number is %4x \n",(((__u16)port->number - (__u16)(port->serial->minor))+1)<<8); + /*Wval is same as application number */ + if (mos7840_num_ports == 4) { + Wval = + (((__u16) port->number - (__u16) (port->serial->minor)) + + 1) << 8; + dbg("mos7840_get_uart_reg application number is %x\n", Wval); + } else { + if (((__u16) port->number - (__u16) (port->serial->minor)) == 0) { + Wval = + (((__u16) port->number - + (__u16) (port->serial->minor)) + 1) << 8; + dbg("mos7840_get_uart_reg application number is %x\n", + Wval); + } else { + Wval = + (((__u16) port->number - + (__u16) (port->serial->minor)) + 2) << 8; + dbg("mos7840_get_uart_reg application number is %x\n", + Wval); + } + } + ret = usb_control_msg(dev, usb_rcvctrlpipe(dev, 0), MCS_RDREQ, + MCS_RD_RTYPE, Wval, reg, val, VENDOR_READ_LENGTH, + MOS_WDR_TIMEOUT); + *val = (*val) & 0x00ff; + return ret; +} + +static void mos7840_dump_serial_port(struct moschip_port *mos7840_port) +{ + + dbg("***************************************\n"); + dbg("SpRegOffset is %2x\n", mos7840_port->SpRegOffset); + dbg("ControlRegOffset is %2x \n", mos7840_port->ControlRegOffset); + dbg("DCRRegOffset is %2x \n", mos7840_port->DcrRegOffset); + dbg("***************************************\n"); + +} + +/************************************************************************/ +/************************************************************************/ +/* I N T E R F A C E F U N C T I O N S */ +/* I N T E R F A C E F U N C T I O N S */ +/************************************************************************/ +/************************************************************************/ + +static inline void mos7840_set_port_private(struct usb_serial_port *port, + struct moschip_port *data) +{ + usb_set_serial_port_data(port, (void *)data); +} + +static inline struct moschip_port *mos7840_get_port_private(struct + usb_serial_port + *port) +{ + return (struct moschip_port *)usb_get_serial_port_data(port); +} + +static int mos7840_handle_new_msr(struct moschip_port *port, __u8 new_msr) +{ + struct moschip_port *mos7840_port; + struct async_icount *icount; + mos7840_port = port; + icount = &mos7840_port->icount; + if (new_msr & + (MOS_MSR_DELTA_CTS | MOS_MSR_DELTA_DSR | MOS_MSR_DELTA_RI | + MOS_MSR_DELTA_CD)) { + icount = &mos7840_port->icount; + + /* update input line counters */ + if (new_msr & MOS_MSR_DELTA_CTS) { + icount->cts++; + } + if (new_msr & MOS_MSR_DELTA_DSR) { + icount->dsr++; + } + if (new_msr & MOS_MSR_DELTA_CD) { + icount->dcd++; + } + if (new_msr & MOS_MSR_DELTA_RI) { + icount->rng++; + } + } + + return 0; +} + +static int mos7840_handle_new_lsr(struct moschip_port *port, __u8 new_lsr) +{ + struct async_icount *icount; + + dbg("%s - %02x", __FUNCTION__, new_lsr); + + if (new_lsr & SERIAL_LSR_BI) { + // + // Parity and Framing errors only count if they + // occur exclusive of a break being + // received. + // + new_lsr &= (__u8) (SERIAL_LSR_OE | SERIAL_LSR_BI); + } + + /* update input line counters */ + icount = &port->icount; + if (new_lsr & SERIAL_LSR_BI) { + icount->brk++; + } + if (new_lsr & SERIAL_LSR_OE) { + icount->overrun++; + } + if (new_lsr & SERIAL_LSR_PE) { + icount->parity++; + } + if (new_lsr & SERIAL_LSR_FE) { + icount->frame++; + } + + return 0; +} + +/************************************************************************/ +/************************************************************************/ +/* U S B C A L L B A C K F U N C T I O N S */ +/* U S B C A L L B A C K F U N C T I O N S */ +/************************************************************************/ +/************************************************************************/ + +static void mos7840_control_callback(struct urb *urb, struct pt_regs *regs) +{ + unsigned char *data; + struct moschip_port *mos7840_port; + __u8 regval = 0x0; + + if (!urb) { + dbg("%s", "Invalid Pointer !!!!:\n"); + return; + } + + switch (urb->status) { + case 0: + /* success */ + break; + case -ECONNRESET: + case -ENOENT: + case -ESHUTDOWN: + /* this urb is terminated, clean up */ + dbg("%s - urb shutting down with status: %d", __FUNCTION__, + urb->status); + return; + default: + dbg("%s - nonzero urb status received: %d", __FUNCTION__, + urb->status); + goto exit; + } + + mos7840_port = (struct moschip_port *)urb->context; + + dbg("%s urb buffer size is %d\n", __FUNCTION__, urb->actual_length); + dbg("%s mos7840_port->MsrLsr is %d port %d\n", __FUNCTION__, + mos7840_port->MsrLsr, mos7840_port->port_num); + data = urb->transfer_buffer; + regval = (__u8) data[0]; + dbg("%s data is %x\n", __FUNCTION__, regval); + if (mos7840_port->MsrLsr == 0) + mos7840_handle_new_msr(mos7840_port, regval); + else if (mos7840_port->MsrLsr == 1) + mos7840_handle_new_lsr(mos7840_port, regval); + + exit: + return; +} + +static int mos7840_get_reg(struct moschip_port *mcs, __u16 Wval, __u16 reg, + __u16 * val) +{ + struct usb_device *dev = mcs->port->serial->dev; + struct usb_ctrlrequest *dr = NULL; + unsigned char *buffer = NULL; + int ret = 0; + buffer = (__u8 *) mcs->ctrl_buf; + +// dr=(struct usb_ctrlrequest *)(buffer); + dr = (void *)(buffer + 2); + dr->bRequestType = MCS_RD_RTYPE; + dr->bRequest = MCS_RDREQ; + dr->wValue = cpu_to_le16(Wval); //0; + dr->wIndex = cpu_to_le16(reg); + dr->wLength = cpu_to_le16(2); + + usb_fill_control_urb(mcs->control_urb, dev, usb_rcvctrlpipe(dev, 0), + (unsigned char *)dr, buffer, 2, + mos7840_control_callback, mcs); + mcs->control_urb->transfer_buffer_length = 2; + ret = usb_submit_urb(mcs->control_urb, GFP_ATOMIC); + return ret; +} + +/***************************************************************************** + * mos7840_interrupt_callback + * this is the callback function for when we have received data on the + * interrupt endpoint. + *****************************************************************************/ + +static void mos7840_interrupt_callback(struct urb *urb, struct pt_regs *regs) +{ + int result; + int length; + struct moschip_port *mos7840_port; + struct usb_serial *serial; + __u16 Data; + unsigned char *data; + __u8 sp[5], st; + int i; + __u16 wval; + + dbg("%s", " : Entering\n"); + if (!urb) { + dbg("%s", "Invalid Pointer !!!!:\n"); + return; + } + + switch (urb->status) { + case 0: + /* success */ + break; + case -ECONNRESET: + case -ENOENT: + case -ESHUTDOWN: + /* this urb is terminated, clean up */ + dbg("%s - urb shutting down with status: %d", __FUNCTION__, + urb->status); + return; + default: + dbg("%s - nonzero urb status received: %d", __FUNCTION__, + urb->status); + goto exit; + } + + length = urb->actual_length; + data = urb->transfer_buffer; + + serial = (struct usb_serial *)urb->context; + + /* Moschip get 5 bytes + * Byte 1 IIR Port 1 (port.number is 0) + * Byte 2 IIR Port 2 (port.number is 1) + * Byte 3 IIR Port 3 (port.number is 2) + * Byte 4 IIR Port 4 (port.number is 3) + * Byte 5 FIFO status for both */ + + if (length && length > 5) { + dbg("%s \n", "Wrong data !!!"); + return; + } + + sp[0] = (__u8) data[0]; + sp[1] = (__u8) data[1]; + sp[2] = (__u8) data[2]; + sp[3] = (__u8) data[3]; + st = (__u8) data[4]; + + for (i = 0; i < serial->num_ports; i++) { + mos7840_port = mos7840_get_port_private(serial->port[i]); + wval = + (((__u16) serial->port[i]->number - + (__u16) (serial->minor)) + 1) << 8; + if (mos7840_port->open) { + if (sp[i] & 0x01) { + dbg("SP%d No Interrupt !!!\n", i); + } else { + switch (sp[i] & 0x0f) { + case SERIAL_IIR_RLS: + dbg("Serial Port %d: Receiver status error or ", i); + dbg("address bit detected in 9-bit mode\n"); + mos7840_port->MsrLsr = 1; + mos7840_get_reg(mos7840_port, wval, + LINE_STATUS_REGISTER, + &Data); + break; + case SERIAL_IIR_MS: + dbg("Serial Port %d: Modem status change\n", i); + mos7840_port->MsrLsr = 0; + mos7840_get_reg(mos7840_port, wval, + MODEM_STATUS_REGISTER, + &Data); + break; + } + } + } + } + exit: + result = usb_submit_urb(urb, GFP_ATOMIC); + if (result) { + dev_err(&urb->dev->dev, + "%s - Error %d submitting interrupt urb\n", + __FUNCTION__, result); + } + + return; + +} + +static int mos7840_port_paranoia_check(struct usb_serial_port *port, + const char *function) +{ + if (!port) { + dbg("%s - port == NULL", function); + return -1; + } + if (!port->serial) { + dbg("%s - port->serial == NULL", function); + return -1; + } + + return 0; +} + +/* Inline functions to check the sanity of a pointer that is passed to us */ +static int mos7840_serial_paranoia_check(struct usb_serial *serial, + const char *function) +{ + if (!serial) { + dbg("%s - serial == NULL", function); + return -1; + } + if (!serial->type) { + dbg("%s - serial->type == NULL!", function); + return -1; + } + + return 0; +} + +static struct usb_serial *mos7840_get_usb_serial(struct usb_serial_port *port, + const char *function) +{ + /* if no port was specified, or it fails a paranoia check */ + if (!port || + mos7840_port_paranoia_check(port, function) || + mos7840_serial_paranoia_check(port->serial, function)) { + /* then say that we don't have a valid usb_serial thing, which will * end up genrating -ENODEV return values */ + return NULL; + } + + return port->serial; +} + +/***************************************************************************** + * mos7840_bulk_in_callback + * this is the callback function for when we have received data on the + * bulk in endpoint. + *****************************************************************************/ + +static void mos7840_bulk_in_callback(struct urb *urb, struct pt_regs *regs) +{ + int status; + unsigned char *data; + struct usb_serial *serial; + struct usb_serial_port *port; + struct moschip_port *mos7840_port; + struct tty_struct *tty; + + if (!urb) { + dbg("%s", "Invalid Pointer !!!!:\n"); + return; + } + + if (urb->status) { + dbg("nonzero read bulk status received: %d", urb->status); + return; + } + + mos7840_port = (struct moschip_port *)urb->context; + if (!mos7840_port) { + dbg("%s", "NULL mos7840_port pointer \n"); + return; + } + + port = (struct usb_serial_port *)mos7840_port->port; + if (mos7840_port_paranoia_check(port, __FUNCTION__)) { + dbg("%s", "Port Paranoia failed \n"); + return; + } + + serial = mos7840_get_usb_serial(port, __FUNCTION__); + if (!serial) { + dbg("%s\n", "Bad serial pointer "); + return; + } + + dbg("%s\n", "Entering... \n"); + + data = urb->transfer_buffer; + + dbg("%s", "Entering ........... \n"); + + if (urb->actual_length) { + tty = mos7840_port->port->tty; + if (tty) { + tty_buffer_request_room(tty, urb->actual_length); + tty_insert_flip_string(tty, data, urb->actual_length); + dbg(" %s \n", data); + tty_flip_buffer_push(tty); + } + mos7840_port->icount.rx += urb->actual_length; + dbg("mos7840_port->icount.rx is %d:\n", + mos7840_port->icount.rx); + } + + if (!mos7840_port->read_urb) { + dbg("%s", "URB KILLED !!!\n"); + return; + } + + if (mos7840_port->read_urb->status != -EINPROGRESS) { + mos7840_port->read_urb->dev = serial->dev; + + status = usb_submit_urb(mos7840_port->read_urb, GFP_ATOMIC); + + if (status) { + dbg(" usb_submit_urb(read bulk) failed, status = %d", + status); + } + } +} + +/***************************************************************************** + * mos7840_bulk_out_data_callback + * this is the callback function for when we have finished sending serial data + * on the bulk out endpoint. + *****************************************************************************/ + +static void mos7840_bulk_out_data_callback(struct urb *urb, + struct pt_regs *regs) +{ + struct moschip_port *mos7840_port; + struct tty_struct *tty; + if (!urb) { + dbg("%s", "Invalid Pointer !!!!:\n"); + return; + } + + if (urb->status) { + dbg("nonzero write bulk status received:%d\n", urb->status); + return; + } + + mos7840_port = (struct moschip_port *)urb->context; + if (!mos7840_port) { + dbg("%s", "NULL mos7840_port pointer \n"); + return; + } + + if (mos7840_port_paranoia_check(mos7840_port->port, __FUNCTION__)) { + dbg("%s", "Port Paranoia failed \n"); + return; + } + + dbg("%s \n", "Entering ........."); + + tty = mos7840_port->port->tty; + + if (tty && mos7840_port->open) { + /* let the tty driver wakeup if it has a special * + * write_wakeup function */ + + if ((tty->flags & (1 << TTY_DO_WRITE_WAKEUP)) + && tty->ldisc.write_wakeup) { + (tty->ldisc.write_wakeup) (tty); + } + + /* tell the tty driver that something has changed */ + wake_up_interruptible(&tty->write_wait); + } + +} + +/************************************************************************/ +/* D R I V E R T T Y I N T E R F A C E F U N C T I O N S */ +/************************************************************************/ +#ifdef MCSSerialProbe +static int mos7840_serial_probe(struct usb_serial *serial, + const struct usb_device_id *id) +{ + + /*need to implement the mode_reg reading and updating\ + structures usb_serial_ device_type\ + (i.e num_ports, num_bulkin,bulkout etc) */ + /* Also we can update the changes attach */ + return 1; +} +#endif + +/***************************************************************************** + * mos7840_open + * this function is called by the tty driver when a port is opened + * If successful, we return 0 + * Otherwise we return a negative error number. + *****************************************************************************/ + +static int mos7840_open(struct usb_serial_port *port, struct file *filp) +{ + int response; + int j; + struct usb_serial *serial; + struct urb *urb; + __u16 Data; + int status; + struct moschip_port *mos7840_port; + + if (mos7840_port_paranoia_check(port, __FUNCTION__)) { + dbg("%s", "Port Paranoia failed \n"); + return -ENODEV; + } + + mos7840_num_open_ports++; + serial = port->serial; + + if (mos7840_serial_paranoia_check(serial, __FUNCTION__)) { + dbg("%s", "Serial Paranoia failed \n"); + return -ENODEV; + } + + mos7840_port = mos7840_get_port_private(port); + + if (mos7840_port == NULL) + return -ENODEV; + + usb_clear_halt(serial->dev, port->write_urb->pipe); + usb_clear_halt(serial->dev, port->read_urb->pipe); + + /* Initialising the write urb pool */ + for (j = 0; j < NUM_URBS; ++j) { + urb = usb_alloc_urb(0, SLAB_ATOMIC); + mos7840_port->write_urb_pool[j] = urb; + + if (urb == NULL) { + err("No more urbs???"); + continue; + } + + urb->transfer_buffer = NULL; + urb->transfer_buffer = + kmalloc(URB_TRANSFER_BUFFER_SIZE, GFP_KERNEL); + if (!urb->transfer_buffer) { + err("%s-out of memory for urb buffers.", __FUNCTION__); + continue; + } + } + +/***************************************************************************** + * Initialize MCS7840 -- Write Init values to corresponding Registers + * + * Register Index + * 1 : IER + * 2 : FCR + * 3 : LCR + * 4 : MCR + * + * 0x08 : SP1/2 Control Reg + *****************************************************************************/ + +//NEED to check the following Block + + status = 0; + Data = 0x0; + status = mos7840_get_reg_sync(port, mos7840_port->SpRegOffset, &Data); + if (status < 0) { + dbg("Reading Spreg failed\n"); + return -1; + } + Data |= 0x80; + status = mos7840_set_reg_sync(port, mos7840_port->SpRegOffset, Data); + if (status < 0) { + dbg("writing Spreg failed\n"); + return -1; + } + + Data &= ~0x80; + status = mos7840_set_reg_sync(port, mos7840_port->SpRegOffset, Data); + if (status < 0) { + dbg("writing Spreg failed\n"); + return -1; + } +//End of block to be checked + + status = 0; + Data = 0x0; + status = + mos7840_get_reg_sync(port, mos7840_port->ControlRegOffset, &Data); + if (status < 0) { + dbg("Reading Controlreg failed\n"); + return -1; + } + Data |= 0x08; //Driver done bit + Data |= 0x20; //rx_disable + status = 0; + status = + mos7840_set_reg_sync(port, mos7840_port->ControlRegOffset, Data); + if (status < 0) { + dbg("writing Controlreg failed\n"); + return -1; + } + //do register settings here + // Set all regs to the device default values. + //////////////////////////////////// + // First Disable all interrupts. + //////////////////////////////////// + + Data = 0x00; + status = 0; + status = mos7840_set_uart_reg(port, INTERRUPT_ENABLE_REGISTER, Data); + if (status < 0) { + dbg("disableing interrupts failed\n"); + return -1; + } + // Set FIFO_CONTROL_REGISTER to the default value + Data = 0x00; + status = 0; + status = mos7840_set_uart_reg(port, FIFO_CONTROL_REGISTER, Data); + if (status < 0) { + dbg("Writing FIFO_CONTROL_REGISTER failed\n"); + return -1; + } + + Data = 0xcf; + status = 0; + status = mos7840_set_uart_reg(port, FIFO_CONTROL_REGISTER, Data); + if (status < 0) { + dbg("Writing FIFO_CONTROL_REGISTER failed\n"); + return -1; + } + + Data = 0x03; + status = 0; + status = mos7840_set_uart_reg(port, LINE_CONTROL_REGISTER, Data); + mos7840_port->shadowLCR = Data; + + Data = 0x0b; + status = 0; + status = mos7840_set_uart_reg(port, MODEM_CONTROL_REGISTER, Data); + mos7840_port->shadowMCR = Data; + + Data = 0x00; + status = 0; + status = mos7840_get_uart_reg(port, LINE_CONTROL_REGISTER, &Data); + mos7840_port->shadowLCR = Data; + + Data |= SERIAL_LCR_DLAB; //data latch enable in LCR 0x80 + status = 0; + status = mos7840_set_uart_reg(port, LINE_CONTROL_REGISTER, Data); + + Data = 0x0c; + status = 0; + status = mos7840_set_uart_reg(port, DIVISOR_LATCH_LSB, Data); + + Data = 0x0; + status = 0; + status = mos7840_set_uart_reg(port, DIVISOR_LATCH_MSB, Data); + + Data = 0x00; + status = 0; + status = mos7840_get_uart_reg(port, LINE_CONTROL_REGISTER, &Data); + + Data = Data & ~SERIAL_LCR_DLAB; + status = 0; + status = mos7840_set_uart_reg(port, LINE_CONTROL_REGISTER, Data); + mos7840_port->shadowLCR = Data; + + //clearing Bulkin and Bulkout Fifo + Data = 0x0; + status = 0; + status = mos7840_get_reg_sync(port, mos7840_port->SpRegOffset, &Data); + + Data = Data | 0x0c; + status = 0; + status = mos7840_set_reg_sync(port, mos7840_port->SpRegOffset, Data); + + Data = Data & ~0x0c; + status = 0; + status = mos7840_set_reg_sync(port, mos7840_port->SpRegOffset, Data); + //Finally enable all interrupts + Data = 0x0; + Data = 0x0c; + status = 0; + status = mos7840_set_uart_reg(port, INTERRUPT_ENABLE_REGISTER, Data); + + //clearing rx_disable + Data = 0x0; + status = 0; + status = + mos7840_get_reg_sync(port, mos7840_port->ControlRegOffset, &Data); + Data = Data & ~0x20; + status = 0; + status = + mos7840_set_reg_sync(port, mos7840_port->ControlRegOffset, Data); + + // rx_negate + Data = 0x0; + status = 0; + status = + mos7840_get_reg_sync(port, mos7840_port->ControlRegOffset, &Data); + Data = Data | 0x10; + status = 0; + status = + mos7840_set_reg_sync(port, mos7840_port->ControlRegOffset, Data); + + /* force low_latency on so that our tty_push actually forces * + * the data through,otherwise it is scheduled, and with * + * high data rates (like with OHCI) data can get lost. */ + + if (port->tty) + port->tty->low_latency = 1; +/* Check to see if we've set up our endpoint info yet * + * (can't set it up in mos7840_startup as the structures * + * were not set up at that time.) */ + if (mos7840_num_open_ports == 1) { + if (serial->port[0]->interrupt_in_buffer == NULL) { + + /* set up interrupt urb */ + + usb_fill_int_urb(serial->port[0]->interrupt_in_urb, + serial->dev, + usb_rcvintpipe(serial->dev, + serial->port[0]-> + interrupt_in_endpointAddress), + serial->port[0]->interrupt_in_buffer, + serial->port[0]->interrupt_in_urb-> + transfer_buffer_length, + mos7840_interrupt_callback, + serial, + serial->port[0]->interrupt_in_urb-> + interval); + + /* start interrupt read for mos7840 * + * will continue as long as mos7840 is connected */ + + response = + usb_submit_urb(serial->port[0]->interrupt_in_urb, + GFP_KERNEL); + if (response) { + err("%s - Error %d submitting interrupt urb", + __FUNCTION__, response); + } + + } + + } + + /* see if we've set up our endpoint info yet * + * (can't set it up in mos7840_startup as the * + * structures were not set up at that time.) */ + + dbg("port number is %d \n", port->number); + dbg("serial number is %d \n", port->serial->minor); + dbg("Bulkin endpoint is %d \n", port->bulk_in_endpointAddress); + dbg("BulkOut endpoint is %d \n", port->bulk_out_endpointAddress); + dbg("Interrupt endpoint is %d \n", port->interrupt_in_endpointAddress); + dbg("port's number in the device is %d\n", mos7840_port->port_num); + mos7840_port->read_urb = port->read_urb; + + /* set up our bulk in urb */ + + usb_fill_bulk_urb(mos7840_port->read_urb, + serial->dev, + usb_rcvbulkpipe(serial->dev, + port->bulk_in_endpointAddress), + port->bulk_in_buffer, + mos7840_port->read_urb->transfer_buffer_length, + mos7840_bulk_in_callback, mos7840_port); + + dbg("mos7840_open: bulkin endpoint is %d\n", + port->bulk_in_endpointAddress); + response = usb_submit_urb(mos7840_port->read_urb, GFP_KERNEL); + if (response) { + err("%s - Error %d submitting control urb", __FUNCTION__, + response); + } + + /* initialize our wait queues */ + init_waitqueue_head(&mos7840_port->wait_chase); + init_waitqueue_head(&mos7840_port->delta_msr_wait); + + /* initialize our icount structure */ + memset(&(mos7840_port->icount), 0x00, sizeof(mos7840_port->icount)); + + /* initialize our port settings */ + mos7840_port->shadowMCR = MCR_MASTER_IE; /* Must set to enable ints! */ + /* send a open port command */ + mos7840_port->open = 1; + //mos7840_change_port_settings(mos7840_port,old_termios); + mos7840_port->icount.tx = 0; + mos7840_port->icount.rx = 0; + + dbg("\n\nusb_serial serial:%x mos7840_port:%x\n usb_serial_port port:%x\n\n", (unsigned int)serial, (unsigned int)mos7840_port, (unsigned int)port); + + return 0; + +} + +/***************************************************************************** + * mos7840_chars_in_buffer + * this function is called by the tty driver when it wants to know how many + * bytes of data we currently have outstanding in the port (data that has + * been written, but hasn't made it out the port yet) + * If successful, we return the number of bytes left to be written in the + * system, + * Otherwise we return a negative error number. + *****************************************************************************/ + +static int mos7840_chars_in_buffer(struct usb_serial_port *port) +{ + int i; + int chars = 0; + struct moschip_port *mos7840_port; + + dbg("%s \n", " mos7840_chars_in_buffer:entering ..........."); + + if (mos7840_port_paranoia_check(port, __FUNCTION__)) { + dbg("%s", "Invalid port \n"); + return -1; + } + + mos7840_port = mos7840_get_port_private(port); + if (mos7840_port == NULL) { + dbg("%s \n", "mos7840_break:leaving ..........."); + return -1; + } + + for (i = 0; i < NUM_URBS; ++i) { + if (mos7840_port->write_urb_pool[i]->status == -EINPROGRESS) { + chars += URB_TRANSFER_BUFFER_SIZE; + } + } + dbg("%s - returns %d", __FUNCTION__, chars); + return (chars); + +} + +/************************************************************************ + * + * mos7840_block_until_tx_empty + * + * This function will block the close until one of the following: + * 1. TX count are 0 + * 2. The mos7840 has stopped + * 3. A timout of 3 seconds without activity has expired + * + ************************************************************************/ +static void mos7840_block_until_tx_empty(struct moschip_port *mos7840_port) +{ + int timeout = HZ / 10; + int wait = 30; + int count; + + while (1) { + + count = mos7840_chars_in_buffer(mos7840_port->port); + + /* Check for Buffer status */ + if (count <= 0) { + return; + } + + /* Block the thread for a while */ + interruptible_sleep_on_timeout(&mos7840_port->wait_chase, + timeout); + + /* No activity.. count down section */ + wait--; + if (wait == 0) { + dbg("%s - TIMEOUT", __FUNCTION__); + return; + } else { + /* Reset timout value back to seconds */ + wait = 30; + } + } +} + +/***************************************************************************** + * mos7840_close + * this function is called by the tty driver when a port is closed + *****************************************************************************/ + +static void mos7840_close(struct usb_serial_port *port, struct file *filp) +{ + struct usb_serial *serial; + struct moschip_port *mos7840_port; + int j; + __u16 Data; + + dbg("%s\n", "mos7840_close:entering..."); + + if (mos7840_port_paranoia_check(port, __FUNCTION__)) { + dbg("%s", "Port Paranoia failed \n"); + return; + } + + serial = mos7840_get_usb_serial(port, __FUNCTION__); + if (!serial) { + dbg("%s", "Serial Paranoia failed \n"); + return; + } + + mos7840_port = mos7840_get_port_private(port); + + if (mos7840_port == NULL) { + return; + } + + for (j = 0; j < NUM_URBS; ++j) + usb_kill_urb(mos7840_port->write_urb_pool[j]); + + /* Freeing Write URBs */ + for (j = 0; j < NUM_URBS; ++j) { + if (mos7840_port->write_urb_pool[j]) { + if (mos7840_port->write_urb_pool[j]->transfer_buffer) + kfree(mos7840_port->write_urb_pool[j]-> + transfer_buffer); + + usb_free_urb(mos7840_port->write_urb_pool[j]); + } + } + + if (serial->dev) { + /* flush and block until tx is empty */ + mos7840_block_until_tx_empty(mos7840_port); + } + + /* While closing port, shutdown all bulk read, write * + * and interrupt read if they exists */ + if (serial->dev) { + + if (mos7840_port->write_urb) { + dbg("%s", "Shutdown bulk write\n"); + usb_kill_urb(mos7840_port->write_urb); + } + + if (mos7840_port->read_urb) { + dbg("%s", "Shutdown bulk read\n"); + usb_kill_urb(mos7840_port->read_urb); + } + if ((&mos7840_port->control_urb)) { + dbg("%s", "Shutdown control read\n"); + // usb_kill_urb (mos7840_port->control_urb); + + } + } +// if(mos7840_port->ctrl_buf != NULL) +// kfree(mos7840_port->ctrl_buf); + mos7840_num_open_ports--; + dbg("mos7840_num_open_ports in close%d:in port%d\n", + mos7840_num_open_ports, port->number); + if (mos7840_num_open_ports == 0) { + if (serial->port[0]->interrupt_in_urb) { + dbg("%s", "Shutdown interrupt_in_urb\n"); + } + } + + if (mos7840_port->write_urb) { + /* if this urb had a transfer buffer already (old tx) free it */ + + if (mos7840_port->write_urb->transfer_buffer != NULL) { + kfree(mos7840_port->write_urb->transfer_buffer); + } + usb_free_urb(mos7840_port->write_urb); + } + + Data = 0x0; + mos7840_set_uart_reg(port, MODEM_CONTROL_REGISTER, Data); + + Data = 0x00; + mos7840_set_uart_reg(port, INTERRUPT_ENABLE_REGISTER, Data); + + mos7840_port->open = 0; + + dbg("%s \n", "Leaving ............"); +} + +/************************************************************************ + * + * mos7840_block_until_chase_response + * + * This function will block the close until one of the following: + * 1. Response to our Chase comes from mos7840 + * 2. A timout of 10 seconds without activity has expired + * (1K of mos7840 data @ 2400 baud ==> 4 sec to empty) + * + ************************************************************************/ + +static void mos7840_block_until_chase_response(struct moschip_port + *mos7840_port) +{ + int timeout = 1 * HZ; + int wait = 10; + int count; + + while (1) { + count = mos7840_chars_in_buffer(mos7840_port->port); + + /* Check for Buffer status */ + if (count <= 0) { + return; + } + + /* Block the thread for a while */ + interruptible_sleep_on_timeout(&mos7840_port->wait_chase, + timeout); + /* No activity.. count down section */ + wait--; + if (wait == 0) { + dbg("%s - TIMEOUT", __FUNCTION__); + return; + } else { + /* Reset timout value back to seconds */ + wait = 10; + } + } + +} + +/***************************************************************************** + * mos7840_break + * this function sends a break to the port + *****************************************************************************/ +static void mos7840_break(struct usb_serial_port *port, int break_state) +{ + unsigned char data; + struct usb_serial *serial; + struct moschip_port *mos7840_port; + + dbg("%s \n", "Entering ..........."); + dbg("mos7840_break: Start\n"); + + if (mos7840_port_paranoia_check(port, __FUNCTION__)) { + dbg("%s", "Port Paranoia failed \n"); + return; + } + + serial = mos7840_get_usb_serial(port, __FUNCTION__); + if (!serial) { + dbg("%s", "Serial Paranoia failed \n"); + return; + } + + mos7840_port = mos7840_get_port_private(port); + + if (mos7840_port == NULL) { + return; + } + + if (serial->dev) { + + /* flush and block until tx is empty */ + mos7840_block_until_chase_response(mos7840_port); + } + + if (break_state == -1) { + data = mos7840_port->shadowLCR | LCR_SET_BREAK; + } else { + data = mos7840_port->shadowLCR & ~LCR_SET_BREAK; + } + + mos7840_port->shadowLCR = data; + dbg("mcs7840_break mos7840_port->shadowLCR is %x\n", + mos7840_port->shadowLCR); + mos7840_set_uart_reg(port, LINE_CONTROL_REGISTER, + mos7840_port->shadowLCR); + + return; +} + +/***************************************************************************** + * mos7840_write_room + * this function is called by the tty driver when it wants to know how many + * bytes of data we can accept for a specific port. + * If successful, we return the amount of room that we have for this port + * Otherwise we return a negative error number. + *****************************************************************************/ + +static int mos7840_write_room(struct usb_serial_port *port) +{ + int i; + int room = 0; + struct moschip_port *mos7840_port; + + dbg("%s \n", " mos7840_write_room:entering ..........."); + + if (mos7840_port_paranoia_check(port, __FUNCTION__)) { + dbg("%s", "Invalid port \n"); + dbg("%s \n", " mos7840_write_room:leaving ..........."); + return -1; + } + + mos7840_port = mos7840_get_port_private(port); + if (mos7840_port == NULL) { + dbg("%s \n", "mos7840_break:leaving ..........."); + return -1; + } + + for (i = 0; i < NUM_URBS; ++i) { + if (mos7840_port->write_urb_pool[i]->status != -EINPROGRESS) { + room += URB_TRANSFER_BUFFER_SIZE; + } + } + + dbg("%s - returns %d", __FUNCTION__, room); + return (room); + +} + +/***************************************************************************** + * mos7840_write + * this function is called by the tty driver when data should be written to + * the port. + * If successful, we return the number of bytes written, otherwise we + * return a negative error number. + *****************************************************************************/ + +static int mos7840_write(struct usb_serial_port *port, + const unsigned char *data, int count) +{ + int status; + int i; + int bytes_sent = 0; + int transfer_size; + int from_user = 0; + + struct moschip_port *mos7840_port; + struct usb_serial *serial; + struct urb *urb; + //__u16 Data; + const unsigned char *current_position = data; + unsigned char *data1; + dbg("%s \n", "entering ..........."); + //dbg("mos7840_write: mos7840_port->shadowLCR is %x\n",mos7840_port->shadowLCR); + +#ifdef NOTMOS7840 + Data = 0x00; + status = 0; + status = mos7840_get_uart_reg(port, LINE_CONTROL_REGISTER, &Data); + mos7840_port->shadowLCR = Data; + dbg("mos7840_write: LINE_CONTROL_REGISTER is %x\n", Data); + dbg("mos7840_write: mos7840_port->shadowLCR is %x\n", + mos7840_port->shadowLCR); + + //Data = 0x03; + //status = mos7840_set_uart_reg(port,LINE_CONTROL_REGISTER,Data); + //mos7840_port->shadowLCR=Data;//Need to add later + + Data |= SERIAL_LCR_DLAB; //data latch enable in LCR 0x80 + status = 0; + status = mos7840_set_uart_reg(port, LINE_CONTROL_REGISTER, Data); + + //Data = 0x0c; + //status = mos7840_set_uart_reg(port,DIVISOR_LATCH_LSB,Data); + Data = 0x00; + status = 0; + status = mos7840_get_uart_reg(port, DIVISOR_LATCH_LSB, &Data); + dbg("mos7840_write:DLL value is %x\n", Data); + + Data = 0x0; + status = 0; + status = mos7840_get_uart_reg(port, DIVISOR_LATCH_MSB, &Data); + dbg("mos7840_write:DLM value is %x\n", Data); + + Data = Data & ~SERIAL_LCR_DLAB; + dbg("mos7840_write: mos7840_port->shadowLCR is %x\n", + mos7840_port->shadowLCR); + status = 0; + status = mos7840_set_uart_reg(port, LINE_CONTROL_REGISTER, Data); +#endif + + if (mos7840_port_paranoia_check(port, __FUNCTION__)) { + dbg("%s", "Port Paranoia failed \n"); + return -1; + } + + serial = port->serial; + if (mos7840_serial_paranoia_check(serial, __FUNCTION__)) { + dbg("%s", "Serial Paranoia failed \n"); + return -1; + } + + mos7840_port = mos7840_get_port_private(port); + if (mos7840_port == NULL) { + dbg("%s", "mos7840_port is NULL\n"); + return -1; + } + + /* try to find a free urb in the list */ + urb = NULL; + + for (i = 0; i < NUM_URBS; ++i) { + if (mos7840_port->write_urb_pool[i]->status != -EINPROGRESS) { + urb = mos7840_port->write_urb_pool[i]; + dbg("\nURB:%d", i); + break; + } + } + + if (urb == NULL) { + dbg("%s - no more free urbs", __FUNCTION__); + goto exit; + } + + if (urb->transfer_buffer == NULL) { + urb->transfer_buffer = + kmalloc(URB_TRANSFER_BUFFER_SIZE, GFP_KERNEL); + + if (urb->transfer_buffer == NULL) { + err("%s no more kernel memory...", __FUNCTION__); + goto exit; + } + } + transfer_size = min(count, URB_TRANSFER_BUFFER_SIZE); + + if (from_user) { + if (copy_from_user + (urb->transfer_buffer, current_position, transfer_size)) { + bytes_sent = -EFAULT; + goto exit; + } + } else { + memcpy(urb->transfer_buffer, current_position, transfer_size); + } + + /* fill urb with data and submit */ + usb_fill_bulk_urb(urb, + serial->dev, + usb_sndbulkpipe(serial->dev, + port->bulk_out_endpointAddress), + urb->transfer_buffer, + transfer_size, + mos7840_bulk_out_data_callback, mos7840_port); + + data1 = urb->transfer_buffer; + dbg("\nbulkout endpoint is %d", port->bulk_out_endpointAddress); + + /* send it down the pipe */ + status = usb_submit_urb(urb, GFP_ATOMIC); + + if (status) { + err("%s - usb_submit_urb(write bulk) failed with status = %d", + __FUNCTION__, status); + bytes_sent = status; + goto exit; + } + bytes_sent = transfer_size; + mos7840_port->icount.tx += transfer_size; + dbg("mos7840_port->icount.tx is %d:\n", mos7840_port->icount.tx); + exit: + + return bytes_sent; + +} + +/***************************************************************************** + * mos7840_throttle + * this function is called by the tty driver when it wants to stop the data + * being read from the port. + *****************************************************************************/ + +static void mos7840_throttle(struct usb_serial_port *port) +{ + struct moschip_port *mos7840_port; + struct tty_struct *tty; + int status; + + if (mos7840_port_paranoia_check(port, __FUNCTION__)) { + dbg("%s", "Invalid port \n"); + return; + } + + dbg("- port %d\n", port->number); + + mos7840_port = mos7840_get_port_private(port); + + if (mos7840_port == NULL) + return; + + if (!mos7840_port->open) { + dbg("%s\n", "port not opened"); + return; + } + + dbg("%s", "Entering .......... \n"); + + tty = port->tty; + if (!tty) { + dbg("%s - no tty available", __FUNCTION__); + return; + } + + /* if we are implementing XON/XOFF, send the stop character */ + if (I_IXOFF(tty)) { + unsigned char stop_char = STOP_CHAR(tty); + status = mos7840_write(port, &stop_char, 1); + if (status <= 0) { + return; + } + } + + /* if we are implementing RTS/CTS, toggle that line */ + if (tty->termios->c_cflag & CRTSCTS) { + mos7840_port->shadowMCR &= ~MCR_RTS; + status = 0; + status = + mos7840_set_uart_reg(port, MODEM_CONTROL_REGISTER, + mos7840_port->shadowMCR); + + if (status < 0) { + return; + } + } + + return; +} + +/***************************************************************************** + * mos7840_unthrottle + * this function is called by the tty driver when it wants to resume the data + * being read from the port (called after SerialThrottle is called) + *****************************************************************************/ +static void mos7840_unthrottle(struct usb_serial_port *port) +{ + struct tty_struct *tty; + int status; + struct moschip_port *mos7840_port = mos7840_get_port_private(port); + + if (mos7840_port_paranoia_check(port, __FUNCTION__)) { + dbg("%s", "Invalid port \n"); + return; + } + + if (mos7840_port == NULL) + return; + + if (!mos7840_port->open) { + dbg("%s - port not opened", __FUNCTION__); + return; + } + + dbg("%s", "Entering .......... \n"); + + tty = port->tty; + if (!tty) { + dbg("%s - no tty available", __FUNCTION__); + return; + } + + /* if we are implementing XON/XOFF, send the start character */ + if (I_IXOFF(tty)) { + unsigned char start_char = START_CHAR(tty); + status = mos7840_write(port, &start_char, 1); + if (status <= 0) { + return; + } + } + + /* if we are implementing RTS/CTS, toggle that line */ + if (tty->termios->c_cflag & CRTSCTS) { + mos7840_port->shadowMCR |= MCR_RTS; + status = 0; + status = + mos7840_set_uart_reg(port, MODEM_CONTROL_REGISTER, + mos7840_port->shadowMCR); + if (status < 0) { + return; + } + } + + return; +} + +static int mos7840_tiocmget(struct usb_serial_port *port, struct file *file) +{ + struct moschip_port *mos7840_port; + unsigned int result; + __u16 msr; + __u16 mcr; + int status = 0; + mos7840_port = mos7840_get_port_private(port); + + dbg("%s - port %d", __FUNCTION__, port->number); + + if (mos7840_port == NULL) + return -ENODEV; + + status = mos7840_get_uart_reg(port, MODEM_STATUS_REGISTER, &msr); + status = mos7840_get_uart_reg(port, MODEM_CONTROL_REGISTER, &mcr); + result = ((mcr & MCR_DTR) ? TIOCM_DTR : 0) + | ((mcr & MCR_RTS) ? TIOCM_RTS : 0) + | ((mcr & MCR_LOOPBACK) ? TIOCM_LOOP : 0) + | ((msr & MOS7840_MSR_CTS) ? TIOCM_CTS : 0) + | ((msr & MOS7840_MSR_CD) ? TIOCM_CAR : 0) + | ((msr & MOS7840_MSR_RI) ? TIOCM_RI : 0) + | ((msr & MOS7840_MSR_DSR) ? TIOCM_DSR : 0); + + dbg("%s - 0x%04X", __FUNCTION__, result); + + return result; +} + +static int mos7840_tiocmset(struct usb_serial_port *port, struct file *file, + unsigned int set, unsigned int clear) +{ + struct moschip_port *mos7840_port; + unsigned int mcr; + unsigned int status; + + dbg("%s - port %d", __FUNCTION__, port->number); + + mos7840_port = mos7840_get_port_private(port); + + if (mos7840_port == NULL) + return -ENODEV; + + mcr = mos7840_port->shadowMCR; + if (clear & TIOCM_RTS) + mcr &= ~MCR_RTS; + if (clear & TIOCM_DTR) + mcr &= ~MCR_DTR; + if (clear & TIOCM_LOOP) + mcr &= ~MCR_LOOPBACK; + + if (set & TIOCM_RTS) + mcr |= MCR_RTS; + if (set & TIOCM_DTR) + mcr |= MCR_DTR; + if (set & TIOCM_LOOP) + mcr |= MCR_LOOPBACK; + + mos7840_port->shadowMCR = mcr; + + status = 0; + status = mos7840_set_uart_reg(port, MODEM_CONTROL_REGISTER, mcr); + if (status < 0) { + dbg("setting MODEM_CONTROL_REGISTER Failed\n"); + return -1; + } + + return 0; +} + +/***************************************************************************** + * mos7840_calc_baud_rate_divisor + * this function calculates the proper baud rate divisor for the specified + * baud rate. + *****************************************************************************/ +static int mos7840_calc_baud_rate_divisor(int baudRate, int *divisor, + __u16 * clk_sel_val) +{ + + dbg("%s - %d", __FUNCTION__, baudRate); + + if (baudRate <= 115200) { + *divisor = 115200 / baudRate; + *clk_sel_val = 0x0; + } + if ((baudRate > 115200) && (baudRate <= 230400)) { + *divisor = 230400 / baudRate; + *clk_sel_val = 0x10; + } else if ((baudRate > 230400) && (baudRate <= 403200)) { + *divisor = 403200 / baudRate; + *clk_sel_val = 0x20; + } else if ((baudRate > 403200) && (baudRate <= 460800)) { + *divisor = 460800 / baudRate; + *clk_sel_val = 0x30; + } else if ((baudRate > 460800) && (baudRate <= 806400)) { + *divisor = 806400 / baudRate; + *clk_sel_val = 0x40; + } else if ((baudRate > 806400) && (baudRate <= 921600)) { + *divisor = 921600 / baudRate; + *clk_sel_val = 0x50; + } else if ((baudRate > 921600) && (baudRate <= 1572864)) { + *divisor = 1572864 / baudRate; + *clk_sel_val = 0x60; + } else if ((baudRate > 1572864) && (baudRate <= 3145728)) { + *divisor = 3145728 / baudRate; + *clk_sel_val = 0x70; + } + return 0; + +#ifdef NOTMCS7840 + + for (i = 0; i < ARRAY_SIZE(mos7840_divisor_table); i++) { + if (mos7840_divisor_table[i].BaudRate == baudrate) { + *divisor = mos7840_divisor_table[i].Divisor; + return 0; + } + } + + /* After trying for all the standard baud rates * + * Try calculating the divisor for this baud rate */ + + if (baudrate > 75 && baudrate < 230400) { + /* get the divisor */ + custom = (__u16) (230400L / baudrate); + + /* Check for round off */ + round1 = (__u16) (2304000L / baudrate); + round = (__u16) (round1 - (custom * 10)); + if (round > 4) { + custom++; + } + *divisor = custom; + + dbg(" Baud %d = %d\n", baudrate, custom); + return 0; + } + + dbg("%s\n", " Baud calculation Failed..."); + return -1; +#endif +} + +/***************************************************************************** + * mos7840_send_cmd_write_baud_rate + * this function sends the proper command to change the baud rate of the + * specified port. + *****************************************************************************/ + +static int mos7840_send_cmd_write_baud_rate(struct moschip_port *mos7840_port, + int baudRate) +{ + int divisor = 0; + int status; + __u16 Data; + unsigned char number; + __u16 clk_sel_val; + struct usb_serial_port *port; + + if (mos7840_port == NULL) + return -1; + + port = (struct usb_serial_port *)mos7840_port->port; + if (mos7840_port_paranoia_check(port, __FUNCTION__)) { + dbg("%s", "Invalid port \n"); + return -1; + } + + if (mos7840_serial_paranoia_check(port->serial, __FUNCTION__)) { + dbg("%s", "Invalid Serial \n"); + return -1; + } + + dbg("%s", "Entering .......... \n"); + + number = mos7840_port->port->number - mos7840_port->port->serial->minor; + + dbg("%s - port = %d, baud = %d", __FUNCTION__, + mos7840_port->port->number, baudRate); + //reset clk_uart_sel in spregOffset + if (baudRate > 115200) { +#ifdef HW_flow_control + //NOTE: need to see the pther register to modify + //setting h/w flow control bit to 1; + status = 0; + Data = 0x2b; + mos7840_port->shadowMCR = Data; + status = + mos7840_set_uart_reg(port, MODEM_CONTROL_REGISTER, Data); + if (status < 0) { + dbg("Writing spreg failed in set_serial_baud\n"); + return -1; + } +#endif + + } else { +#ifdef HW_flow_control + //setting h/w flow control bit to 0; + status = 0; + Data = 0xb; + mos7840_port->shadowMCR = Data; + status = + mos7840_set_uart_reg(port, MODEM_CONTROL_REGISTER, Data); + if (status < 0) { + dbg("Writing spreg failed in set_serial_baud\n"); + return -1; + } +#endif + + } + + if (1) //baudRate <= 115200) + { + clk_sel_val = 0x0; + Data = 0x0; + status = 0; + status = + mos7840_calc_baud_rate_divisor(baudRate, &divisor, + &clk_sel_val); + status = + mos7840_get_reg_sync(port, mos7840_port->SpRegOffset, + &Data); + if (status < 0) { + dbg("reading spreg failed in set_serial_baud\n"); + return -1; + } + Data = (Data & 0x8f) | clk_sel_val; + status = 0; + status = + mos7840_set_reg_sync(port, mos7840_port->SpRegOffset, Data); + if (status < 0) { + dbg("Writing spreg failed in set_serial_baud\n"); + return -1; + } + /* Calculate the Divisor */ + + if (status) { + err("%s - bad baud rate", __FUNCTION__); + dbg("%s\n", "bad baud rate"); + return status; + } + /* Enable access to divisor latch */ + Data = mos7840_port->shadowLCR | SERIAL_LCR_DLAB; + mos7840_port->shadowLCR = Data; + mos7840_set_uart_reg(port, LINE_CONTROL_REGISTER, Data); + + /* Write the divisor */ + Data = (unsigned char)(divisor & 0xff); + dbg("set_serial_baud Value to write DLL is %x\n", Data); + mos7840_set_uart_reg(port, DIVISOR_LATCH_LSB, Data); + + Data = (unsigned char)((divisor & 0xff00) >> 8); + dbg("set_serial_baud Value to write DLM is %x\n", Data); + mos7840_set_uart_reg(port, DIVISOR_LATCH_MSB, Data); + + /* Disable access to divisor latch */ + Data = mos7840_port->shadowLCR & ~SERIAL_LCR_DLAB; + mos7840_port->shadowLCR = Data; + mos7840_set_uart_reg(port, LINE_CONTROL_REGISTER, Data); + + } + + return status; +} + +/***************************************************************************** + * mos7840_change_port_settings + * This routine is called to set the UART on the device to match + * the specified new settings. + *****************************************************************************/ + +static void mos7840_change_port_settings(struct moschip_port *mos7840_port, + struct termios *old_termios) +{ + struct tty_struct *tty; + int baud; + unsigned cflag; + unsigned iflag; + __u8 lData; + __u8 lParity; + __u8 lStop; + int status; + __u16 Data; + struct usb_serial_port *port; + struct usb_serial *serial; + + if (mos7840_port == NULL) + return; + + port = (struct usb_serial_port *)mos7840_port->port; + + if (mos7840_port_paranoia_check(port, __FUNCTION__)) { + dbg("%s", "Invalid port \n"); + return; + } + + if (mos7840_serial_paranoia_check(port->serial, __FUNCTION__)) { + dbg("%s", "Invalid Serial \n"); + return; + } + + serial = port->serial; + + dbg("%s - port %d", __FUNCTION__, mos7840_port->port->number); + + if (!mos7840_port->open) { + dbg("%s - port not opened", __FUNCTION__); + return; + } + + tty = mos7840_port->port->tty; + + if ((!tty) || (!tty->termios)) { + dbg("%s - no tty structures", __FUNCTION__); + return; + } + + dbg("%s", "Entering .......... \n"); + + lData = LCR_BITS_8; + lStop = LCR_STOP_1; + lParity = LCR_PAR_NONE; + + cflag = tty->termios->c_cflag; + iflag = tty->termios->c_iflag; + + /* Change the number of bits */ + if (cflag & CSIZE) { + switch (cflag & CSIZE) { + case CS5: + lData = LCR_BITS_5; + break; + + case CS6: + lData = LCR_BITS_6; + break; + + case CS7: + lData = LCR_BITS_7; + break; + default: + case CS8: + lData = LCR_BITS_8; + break; + } + } + /* Change the Parity bit */ + if (cflag & PARENB) { + if (cflag & PARODD) { + lParity = LCR_PAR_ODD; + dbg("%s - parity = odd", __FUNCTION__); + } else { + lParity = LCR_PAR_EVEN; + dbg("%s - parity = even", __FUNCTION__); + } + + } else { + dbg("%s - parity = none", __FUNCTION__); + } + + if (cflag & CMSPAR) { + lParity = lParity | 0x20; + } + + /* Change the Stop bit */ + if (cflag & CSTOPB) { + lStop = LCR_STOP_2; + dbg("%s - stop bits = 2", __FUNCTION__); + } else { + lStop = LCR_STOP_1; + dbg("%s - stop bits = 1", __FUNCTION__); + } + + /* Update the LCR with the correct value */ + mos7840_port->shadowLCR &= + ~(LCR_BITS_MASK | LCR_STOP_MASK | LCR_PAR_MASK); + mos7840_port->shadowLCR |= (lData | lParity | lStop); + + dbg("mos7840_change_port_settings mos7840_port->shadowLCR is %x\n", + mos7840_port->shadowLCR); + /* Disable Interrupts */ + Data = 0x00; + mos7840_set_uart_reg(port, INTERRUPT_ENABLE_REGISTER, Data); + + Data = 0x00; + mos7840_set_uart_reg(port, FIFO_CONTROL_REGISTER, Data); + + Data = 0xcf; + mos7840_set_uart_reg(port, FIFO_CONTROL_REGISTER, Data); + + /* Send the updated LCR value to the mos7840 */ + Data = mos7840_port->shadowLCR; + + mos7840_set_uart_reg(port, LINE_CONTROL_REGISTER, Data); + + Data = 0x00b; + mos7840_port->shadowMCR = Data; + mos7840_set_uart_reg(port, MODEM_CONTROL_REGISTER, Data); + Data = 0x00b; + mos7840_set_uart_reg(port, MODEM_CONTROL_REGISTER, Data); + + /* set up the MCR register and send it to the mos7840 */ + + mos7840_port->shadowMCR = MCR_MASTER_IE; + if (cflag & CBAUD) { + mos7840_port->shadowMCR |= (MCR_DTR | MCR_RTS); + } + + if (cflag & CRTSCTS) { + mos7840_port->shadowMCR |= (MCR_XON_ANY); + + } else { + mos7840_port->shadowMCR &= ~(MCR_XON_ANY); + } + + Data = mos7840_port->shadowMCR; + mos7840_set_uart_reg(port, MODEM_CONTROL_REGISTER, Data); + + /* Determine divisor based on baud rate */ + baud = tty_get_baud_rate(tty); + + if (!baud) { + /* pick a default, any default... */ + dbg("%s\n", "Picked default baud..."); + baud = 9600; + } + + dbg("%s - baud rate = %d", __FUNCTION__, baud); + status = mos7840_send_cmd_write_baud_rate(mos7840_port, baud); + + /* Enable Interrupts */ + Data = 0x0c; + mos7840_set_uart_reg(port, INTERRUPT_ENABLE_REGISTER, Data); + + if (mos7840_port->read_urb->status != -EINPROGRESS) { + mos7840_port->read_urb->dev = serial->dev; + + status = usb_submit_urb(mos7840_port->read_urb, GFP_ATOMIC); + + if (status) { + dbg(" usb_submit_urb(read bulk) failed, status = %d", + status); + } + } + wake_up(&mos7840_port->delta_msr_wait); + mos7840_port->delta_msr_cond = 1; + dbg("mos7840_change_port_settings mos7840_port->shadowLCR is End %x\n", + mos7840_port->shadowLCR); + + return; +} + +/***************************************************************************** + * mos7840_set_termios + * this function is called by the tty driver when it wants to change + * the termios structure + *****************************************************************************/ + +static void mos7840_set_termios(struct usb_serial_port *port, + struct termios *old_termios) +{ + int status; + unsigned int cflag; + struct usb_serial *serial; + struct moschip_port *mos7840_port; + struct tty_struct *tty; + dbg("mos7840_set_termios: START\n"); + if (mos7840_port_paranoia_check(port, __FUNCTION__)) { + dbg("%s", "Invalid port \n"); + return; + } + + serial = port->serial; + + if (mos7840_serial_paranoia_check(serial, __FUNCTION__)) { + dbg("%s", "Invalid Serial \n"); + return; + } + + mos7840_port = mos7840_get_port_private(port); + + if (mos7840_port == NULL) + return; + + tty = port->tty; + + if (!port->tty || !port->tty->termios) { + dbg("%s - no tty or termios", __FUNCTION__); + return; + } + + if (!mos7840_port->open) { + dbg("%s - port not opened", __FUNCTION__); + return; + } + + dbg("%s\n", "setting termios - "); + + cflag = tty->termios->c_cflag; + + if (!cflag) { + dbg("%s %s\n", __FUNCTION__, "cflag is NULL"); + return; + } + + /* check that they really want us to change something */ + if (old_termios) { + if ((cflag == old_termios->c_cflag) && + (RELEVANT_IFLAG(tty->termios->c_iflag) == + RELEVANT_IFLAG(old_termios->c_iflag))) { + dbg("%s\n", "Nothing to change"); + return; + } + } + + dbg("%s - clfag %08x iflag %08x", __FUNCTION__, + tty->termios->c_cflag, RELEVANT_IFLAG(tty->termios->c_iflag)); + + if (old_termios) { + dbg("%s - old clfag %08x old iflag %08x", __FUNCTION__, + old_termios->c_cflag, RELEVANT_IFLAG(old_termios->c_iflag)); + } + + dbg("%s - port %d", __FUNCTION__, port->number); + + /* change the port settings to the new ones specified */ + + mos7840_change_port_settings(mos7840_port, old_termios); + + if (!mos7840_port->read_urb) { + dbg("%s", "URB KILLED !!!!!\n"); + return; + } + + if (mos7840_port->read_urb->status != -EINPROGRESS) { + mos7840_port->read_urb->dev = serial->dev; + status = usb_submit_urb(mos7840_port->read_urb, GFP_ATOMIC); + if (status) { + dbg(" usb_submit_urb(read bulk) failed, status = %d", + status); + } + } + return; +} + +/***************************************************************************** + * mos7840_get_lsr_info - get line status register info + * + * Purpose: Let user call ioctl() to get info when the UART physically + * is emptied. On bus types like RS485, the transmitter must + * release the bus after transmitting. This must be done when + * the transmit shift register is empty, not be done when the + * transmit holding register is empty. This functionality + * allows an RS485 driver to be written in user space. + *****************************************************************************/ + +static int mos7840_get_lsr_info(struct moschip_port *mos7840_port, + unsigned int *value) +{ + int count; + unsigned int result = 0; + + count = mos7840_chars_in_buffer(mos7840_port->port); + if (count == 0) { + dbg("%s -- Empty", __FUNCTION__); + result = TIOCSER_TEMT; + } + + if (copy_to_user(value, &result, sizeof(int))) + return -EFAULT; + return 0; +} + +/***************************************************************************** + * mos7840_get_bytes_avail - get number of bytes available + * + * Purpose: Let user call ioctl to get the count of number of bytes available. + *****************************************************************************/ + +static int mos7840_get_bytes_avail(struct moschip_port *mos7840_port, + unsigned int *value) +{ + unsigned int result = 0; + struct tty_struct *tty = mos7840_port->port->tty; + + if (!tty) + return -ENOIOCTLCMD; + + result = tty->read_cnt; + + dbg("%s(%d) = %d", __FUNCTION__, mos7840_port->port->number, result); + if (copy_to_user(value, &result, sizeof(int))) + return -EFAULT; + + return -ENOIOCTLCMD; +} + +/***************************************************************************** + * mos7840_set_modem_info + * function to set modem info + *****************************************************************************/ + +static int mos7840_set_modem_info(struct moschip_port *mos7840_port, + unsigned int cmd, unsigned int *value) +{ + unsigned int mcr; + unsigned int arg; + __u16 Data; + int status; + struct usb_serial_port *port; + + if (mos7840_port == NULL) + return -1; + + port = (struct usb_serial_port *)mos7840_port->port; + if (mos7840_port_paranoia_check(port, __FUNCTION__)) { + dbg("%s", "Invalid port \n"); + return -1; + } + + mcr = mos7840_port->shadowMCR; + + if (copy_from_user(&arg, value, sizeof(int))) + return -EFAULT; + + switch (cmd) { + case TIOCMBIS: + if (arg & TIOCM_RTS) + mcr |= MCR_RTS; + if (arg & TIOCM_DTR) + mcr |= MCR_RTS; + if (arg & TIOCM_LOOP) + mcr |= MCR_LOOPBACK; + break; + + case TIOCMBIC: + if (arg & TIOCM_RTS) + mcr &= ~MCR_RTS; + if (arg & TIOCM_DTR) + mcr &= ~MCR_RTS; + if (arg & TIOCM_LOOP) + mcr &= ~MCR_LOOPBACK; + break; + + case TIOCMSET: + /* turn off the RTS and DTR and LOOPBACK + * and then only turn on what was asked to */ + mcr &= ~(MCR_RTS | MCR_DTR | MCR_LOOPBACK); + mcr |= ((arg & TIOCM_RTS) ? MCR_RTS : 0); + mcr |= ((arg & TIOCM_DTR) ? MCR_DTR : 0); + mcr |= ((arg & TIOCM_LOOP) ? MCR_LOOPBACK : 0); + break; + } + + mos7840_port->shadowMCR = mcr; + + Data = mos7840_port->shadowMCR; + status = 0; + status = mos7840_set_uart_reg(port, MODEM_CONTROL_REGISTER, Data); + if (status < 0) { + dbg("setting MODEM_CONTROL_REGISTER Failed\n"); + return -1; + } + + return 0; +} + +/***************************************************************************** + * mos7840_get_modem_info + * function to get modem info + *****************************************************************************/ + +static int mos7840_get_modem_info(struct moschip_port *mos7840_port, + unsigned int *value) +{ + unsigned int result = 0; + __u16 msr; + unsigned int mcr = mos7840_port->shadowMCR; + int status = 0; + status = + mos7840_get_uart_reg(mos7840_port->port, MODEM_STATUS_REGISTER, + &msr); + result = ((mcr & MCR_DTR) ? TIOCM_DTR : 0) /* 0x002 */ + |((mcr & MCR_RTS) ? TIOCM_RTS : 0) /* 0x004 */ + |((msr & MOS7840_MSR_CTS) ? TIOCM_CTS : 0) /* 0x020 */ + |((msr & MOS7840_MSR_CD) ? TIOCM_CAR : 0) /* 0x040 */ + |((msr & MOS7840_MSR_RI) ? TIOCM_RI : 0) /* 0x080 */ + |((msr & MOS7840_MSR_DSR) ? TIOCM_DSR : 0); /* 0x100 */ + + dbg("%s -- %x", __FUNCTION__, result); + + if (copy_to_user(value, &result, sizeof(int))) + return -EFAULT; + return 0; +} + +/***************************************************************************** + * mos7840_get_serial_info + * function to get information about serial port + *****************************************************************************/ + +static int mos7840_get_serial_info(struct moschip_port *mos7840_port, + struct serial_struct *retinfo) +{ + struct serial_struct tmp; + + if (mos7840_port == NULL) + return -1; + + if (!retinfo) + return -EFAULT; + + memset(&tmp, 0, sizeof(tmp)); + + tmp.type = PORT_16550A; + tmp.line = mos7840_port->port->serial->minor; + tmp.port = mos7840_port->port->number; + tmp.irq = 0; + tmp.flags = ASYNC_SKIP_TEST | ASYNC_AUTO_IRQ; + tmp.xmit_fifo_size = NUM_URBS * URB_TRANSFER_BUFFER_SIZE; + tmp.baud_base = 9600; + tmp.close_delay = 5 * HZ; + tmp.closing_wait = 30 * HZ; + + if (copy_to_user(retinfo, &tmp, sizeof(*retinfo))) + return -EFAULT; + return 0; +} + +/***************************************************************************** + * SerialIoctl + * this function handles any ioctl calls to the driver + *****************************************************************************/ + +static int mos7840_ioctl(struct usb_serial_port *port, struct file *file, + unsigned int cmd, unsigned long arg) +{ + struct moschip_port *mos7840_port; + struct tty_struct *tty; + + struct async_icount cnow; + struct async_icount cprev; + struct serial_icounter_struct icount; + int mosret = 0; + int retval; + struct tty_ldisc *ld; + + if (mos7840_port_paranoia_check(port, __FUNCTION__)) { + dbg("%s", "Invalid port \n"); + return -1; + } + + mos7840_port = mos7840_get_port_private(port); + tty = mos7840_port->port->tty; + + if (mos7840_port == NULL) + return -1; + + dbg("%s - port %d, cmd = 0x%x", __FUNCTION__, port->number, cmd); + + switch (cmd) { + /* return number of bytes available */ + + case TIOCINQ: + dbg("%s (%d) TIOCINQ", __FUNCTION__, port->number); + return mos7840_get_bytes_avail(mos7840_port, + (unsigned int *)arg); + break; + + case TIOCOUTQ: + dbg("%s (%d) TIOCOUTQ", __FUNCTION__, port->number); + return put_user(tty->driver->chars_in_buffer ? + tty->driver->chars_in_buffer(tty) : 0, + (int __user *)arg); + break; + + case TCFLSH: + retval = tty_check_change(tty); + if (retval) + return retval; + + ld = tty_ldisc_ref(tty); + switch (arg) { + case TCIFLUSH: + if (ld && ld->flush_buffer) + ld->flush_buffer(tty); + break; + case TCIOFLUSH: + if (ld && ld->flush_buffer) + ld->flush_buffer(tty); + /* fall through */ + case TCOFLUSH: + if (tty->driver->flush_buffer) + tty->driver->flush_buffer(tty); + break; + default: + tty_ldisc_deref(ld); + return -EINVAL; + } + tty_ldisc_deref(ld); + return 0; + + case TCGETS: + if (kernel_termios_to_user_termios + ((struct termios __user *)arg, tty->termios)) + return -EFAULT; + return 0; + + case TIOCSERGETLSR: + dbg("%s (%d) TIOCSERGETLSR", __FUNCTION__, port->number); + return mos7840_get_lsr_info(mos7840_port, (unsigned int *)arg); + return 0; + + case TIOCMBIS: + case TIOCMBIC: + case TIOCMSET: + dbg("%s (%d) TIOCMSET/TIOCMBIC/TIOCMSET", __FUNCTION__, + port->number); + mosret = + mos7840_set_modem_info(mos7840_port, cmd, + (unsigned int *)arg); + return mosret; + + case TIOCMGET: + dbg("%s (%d) TIOCMGET", __FUNCTION__, port->number); + return mos7840_get_modem_info(mos7840_port, + (unsigned int *)arg); + + case TIOCGSERIAL: + dbg("%s (%d) TIOCGSERIAL", __FUNCTION__, port->number); + return mos7840_get_serial_info(mos7840_port, + (struct serial_struct *)arg); + + case TIOCSSERIAL: + dbg("%s (%d) TIOCSSERIAL", __FUNCTION__, port->number); + break; + + case TIOCMIWAIT: + dbg("%s (%d) TIOCMIWAIT", __FUNCTION__, port->number); + cprev = mos7840_port->icount; + while (1) { + //interruptible_sleep_on(&mos7840_port->delta_msr_wait); + mos7840_port->delta_msr_cond = 0; + wait_event_interruptible(mos7840_port->delta_msr_wait, + (mos7840_port-> + delta_msr_cond == 1)); + + /* see if a signal did it */ + if (signal_pending(current)) + return -ERESTARTSYS; + cnow = mos7840_port->icount; + if (cnow.rng == cprev.rng && cnow.dsr == cprev.dsr && + cnow.dcd == cprev.dcd && cnow.cts == cprev.cts) + return -EIO; /* no change => error */ + if (((arg & TIOCM_RNG) && (cnow.rng != cprev.rng)) || + ((arg & TIOCM_DSR) && (cnow.dsr != cprev.dsr)) || + ((arg & TIOCM_CD) && (cnow.dcd != cprev.dcd)) || + ((arg & TIOCM_CTS) && (cnow.cts != cprev.cts))) { + return 0; + } + cprev = cnow; + } + /* NOTREACHED */ + break; + + case TIOCGICOUNT: + cnow = mos7840_port->icount; + icount.cts = cnow.cts; + icount.dsr = cnow.dsr; + icount.rng = cnow.rng; + icount.dcd = cnow.dcd; + icount.rx = cnow.rx; + icount.tx = cnow.tx; + icount.frame = cnow.frame; + icount.overrun = cnow.overrun; + icount.parity = cnow.parity; + icount.brk = cnow.brk; + icount.buf_overrun = cnow.buf_overrun; + + dbg("%s (%d) TIOCGICOUNT RX=%d, TX=%d", __FUNCTION__, + port->number, icount.rx, icount.tx); + if (copy_to_user((void *)arg, &icount, sizeof(icount))) + return -EFAULT; + return 0; + + case TIOCEXBAUD: + return 0; + default: + break; + } + + return -ENOIOCTLCMD; +} + +static int mos7840_calc_num_ports(struct usb_serial *serial) +{ + + dbg("numberofendpoints: %d \n", + (int)serial->interface->cur_altsetting->desc.bNumEndpoints); + dbg("numberofendpoints: %d \n", + (int)serial->interface->altsetting->desc.bNumEndpoints); + if (serial->interface->cur_altsetting->desc.bNumEndpoints == 5) { + mos7840_num_ports = 2; + serial->type->num_ports = 2; + } else if (serial->interface->cur_altsetting->desc.bNumEndpoints == 9) { + mos7840_num_ports = 4; + serial->type->num_bulk_in = 4; + serial->type->num_bulk_out = 4; + serial->type->num_ports = 4; + } + + return mos7840_num_ports; +} + +/**************************************************************************** + * mos7840_startup + ****************************************************************************/ + +static int mos7840_startup(struct usb_serial *serial) +{ + struct moschip_port *mos7840_port; + struct usb_device *dev; + int i, status; + + __u16 Data; + dbg("%s \n", " mos7840_startup :entering.........."); + + if (!serial) { + dbg("%s\n", "Invalid Handler"); + return -1; + } + + dev = serial->dev; + + dbg("%s\n", "Entering..."); + + /* we set up the pointers to the endpoints in the mos7840_open * + * function, as the structures aren't created yet. */ + + /* set up port private structures */ + for (i = 0; i < serial->num_ports; ++i) { + mos7840_port = kmalloc(sizeof(struct moschip_port), GFP_KERNEL); + if (mos7840_port == NULL) { + err("%s - Out of memory", __FUNCTION__); + return -ENOMEM; + } + memset(mos7840_port, 0, sizeof(struct moschip_port)); + + /* Initialize all port interrupt end point to port 0 int endpoint * + * Our device has only one interrupt end point comman to all port */ + + mos7840_port->port = serial->port[i]; + mos7840_set_port_private(serial->port[i], mos7840_port); + + mos7840_port->port_num = ((serial->port[i]->number - + (serial->port[i]->serial->minor)) + + 1); + + if (mos7840_port->port_num == 1) { + mos7840_port->SpRegOffset = 0x0; + mos7840_port->ControlRegOffset = 0x1; + mos7840_port->DcrRegOffset = 0x4; + } else if ((mos7840_port->port_num == 2) + && (mos7840_num_ports == 4)) { + mos7840_port->SpRegOffset = 0x8; + mos7840_port->ControlRegOffset = 0x9; + mos7840_port->DcrRegOffset = 0x16; + } else if ((mos7840_port->port_num == 2) + && (mos7840_num_ports == 2)) { + mos7840_port->SpRegOffset = 0xa; + mos7840_port->ControlRegOffset = 0xb; + mos7840_port->DcrRegOffset = 0x19; + } else if ((mos7840_port->port_num == 3) + && (mos7840_num_ports == 4)) { + mos7840_port->SpRegOffset = 0xa; + mos7840_port->ControlRegOffset = 0xb; + mos7840_port->DcrRegOffset = 0x19; + } else if ((mos7840_port->port_num == 4) + && (mos7840_num_ports == 4)) { + mos7840_port->SpRegOffset = 0xc; + mos7840_port->ControlRegOffset = 0xd; + mos7840_port->DcrRegOffset = 0x1c; + } + mos7840_dump_serial_port(mos7840_port); + + mos7840_set_port_private(serial->port[i], mos7840_port); + + //enable rx_disable bit in control register + + status = + mos7840_get_reg_sync(serial->port[i], + mos7840_port->ControlRegOffset, &Data); + if (status < 0) { + dbg("Reading ControlReg failed status-0x%x\n", status); + break; + } else + dbg("ControlReg Reading success val is %x, status%d\n", + Data, status); + Data |= 0x08; //setting driver done bit + Data |= 0x04; //sp1_bit to have cts change reflect in modem status reg + + //Data |= 0x20; //rx_disable bit + status = 0; + status = + mos7840_set_reg_sync(serial->port[i], + mos7840_port->ControlRegOffset, Data); + if (status < 0) { + dbg("Writing ControlReg failed(rx_disable) status-0x%x\n", status); + break; + } else + dbg("ControlReg Writing success(rx_disable) status%d\n", + status); + + //Write default values in DCR (i.e 0x01 in DCR0, 0x05 in DCR2 and 0x24 in DCR3 + Data = 0x01; + status = 0; + status = + mos7840_set_reg_sync(serial->port[i], + (__u16) (mos7840_port->DcrRegOffset + + 0), Data); + if (status < 0) { + dbg("Writing DCR0 failed status-0x%x\n", status); + break; + } else + dbg("DCR0 Writing success status%d\n", status); + + Data = 0x05; + status = 0; + status = + mos7840_set_reg_sync(serial->port[i], + (__u16) (mos7840_port->DcrRegOffset + + 1), Data); + if (status < 0) { + dbg("Writing DCR1 failed status-0x%x\n", status); + break; + } else + dbg("DCR1 Writing success status%d\n", status); + + Data = 0x24; + status = 0; + status = + mos7840_set_reg_sync(serial->port[i], + (__u16) (mos7840_port->DcrRegOffset + + 2), Data); + if (status < 0) { + dbg("Writing DCR2 failed status-0x%x\n", status); + break; + } else + dbg("DCR2 Writing success status%d\n", status); + + // write values in clkstart0x0 and clkmulti 0x20 + Data = 0x0; + status = 0; + status = + mos7840_set_reg_sync(serial->port[i], + CLK_START_VALUE_REGISTER, Data); + if (status < 0) { + dbg("Writing CLK_START_VALUE_REGISTER failed status-0x%x\n", status); + break; + } else + dbg("CLK_START_VALUE_REGISTER Writing success status%d\n", status); + + Data = 0x20; + status = 0; + status = + mos7840_set_reg_sync(serial->port[i], CLK_MULTI_REGISTER, + Data); + if (status < 0) { + dbg("Writing CLK_MULTI_REGISTER failed status-0x%x\n", + status); + break; + } else + dbg("CLK_MULTI_REGISTER Writing success status%d\n", + status); + + //write value 0x0 to scratchpad register + Data = 0x00; + status = 0; + status = + mos7840_set_uart_reg(serial->port[i], SCRATCH_PAD_REGISTER, + Data); + if (status < 0) { + dbg("Writing SCRATCH_PAD_REGISTER failed status-0x%x\n", + status); + break; + } else + dbg("SCRATCH_PAD_REGISTER Writing success status%d\n", + status); + + //Zero Length flag register + if ((mos7840_port->port_num != 1) + && (mos7840_num_ports == 2)) { + + Data = 0xff; + status = 0; + status = mos7840_set_reg_sync(serial->port[i], + (__u16) (ZLP_REG1 + + ((__u16) + mos7840_port-> + port_num)), + Data); + dbg("ZLIP offset%x\n", + (__u16) (ZLP_REG1 + + ((__u16) mos7840_port->port_num))); + if (status < 0) { + dbg("Writing ZLP_REG%d failed status-0x%x\n", + i + 2, status); + break; + } else + dbg("ZLP_REG%d Writing success status%d\n", + i + 2, status); + } else { + Data = 0xff; + status = 0; + status = mos7840_set_reg_sync(serial->port[i], + (__u16) (ZLP_REG1 + + ((__u16) + mos7840_port-> + port_num) - + 0x1), Data); + dbg("ZLIP offset%x\n", + (__u16) (ZLP_REG1 + + ((__u16) mos7840_port->port_num) - 0x1)); + if (status < 0) { + dbg("Writing ZLP_REG%d failed status-0x%x\n", + i + 1, status); + break; + } else + dbg("ZLP_REG%d Writing success status%d\n", + i + 1, status); + + } + mos7840_port->control_urb = usb_alloc_urb(0, SLAB_ATOMIC); + mos7840_port->ctrl_buf = kmalloc(16, GFP_KERNEL); + + } + + //Zero Length flag enable + Data = 0x0f; + status = 0; + status = mos7840_set_reg_sync(serial->port[0], ZLP_REG5, Data); + if (status < 0) { + dbg("Writing ZLP_REG5 failed status-0x%x\n", status); + return -1; + } else + dbg("ZLP_REG5 Writing success status%d\n", status); + + /* setting configuration feature to one */ + usb_control_msg(serial->dev, usb_sndctrlpipe(serial->dev, 0), + (__u8) 0x03, 0x00, 0x01, 0x00, 0x00, 0x00, 5 * HZ); + return 0; +} + +/**************************************************************************** + * mos7840_shutdown + * This function is called whenever the device is removed from the usb bus. + ****************************************************************************/ + +static void mos7840_shutdown(struct usb_serial *serial) +{ + int i; + struct moschip_port *mos7840_port; + dbg("%s \n", " shutdown :entering.........."); + + if (!serial) { + dbg("%s", "Invalid Handler \n"); + return; + } + + /* check for the ports to be closed,close the ports and disconnect */ + + /* free private structure allocated for serial port * + * stop reads and writes on all ports */ + + for (i = 0; i < serial->num_ports; ++i) { + mos7840_port = mos7840_get_port_private(serial->port[i]); + kfree(mos7840_port->ctrl_buf); + usb_kill_urb(mos7840_port->control_urb); + kfree(mos7840_port); + mos7840_set_port_private(serial->port[i], NULL); + } + + dbg("%s\n", "Thank u :: "); + +} + +static struct usb_serial_driver moschip7840_4port_device = { + .driver = { + .owner = THIS_MODULE, + .name = "mos7840", + }, + .description = DRIVER_DESC, + .id_table = moschip_port_id_table, + .num_interrupt_in = 1, //NUM_DONT_CARE,//1, +#ifdef check + .num_bulk_in = 4, + .num_bulk_out = 4, + .num_ports = 4, +#endif + .open = mos7840_open, + .close = mos7840_close, + .write = mos7840_write, + .write_room = mos7840_write_room, + .chars_in_buffer = mos7840_chars_in_buffer, + .throttle = mos7840_throttle, + .unthrottle = mos7840_unthrottle, + .calc_num_ports = mos7840_calc_num_ports, +#ifdef MCSSerialProbe + .probe = mos7840_serial_probe, +#endif + .ioctl = mos7840_ioctl, + .set_termios = mos7840_set_termios, + .break_ctl = mos7840_break, + .tiocmget = mos7840_tiocmget, + .tiocmset = mos7840_tiocmset, + .attach = mos7840_startup, + .shutdown = mos7840_shutdown, + .read_bulk_callback = mos7840_bulk_in_callback, + .read_int_callback = mos7840_interrupt_callback, +}; + +static struct usb_driver io_driver = { + .name = "mos7840", + .probe = usb_serial_probe, + .disconnect = usb_serial_disconnect, + .id_table = moschip_id_table_combined, +}; + +/**************************************************************************** + * moschip7840_init + * This is called by the module subsystem, or on startup to initialize us + ****************************************************************************/ +static int __init moschip7840_init(void) +{ + int retval; + + dbg("%s \n", " mos7840_init :entering.........."); + + /* Register with the usb serial */ + retval = usb_serial_register(&moschip7840_4port_device); + + if (retval) + goto failed_port_device_register; + + dbg("%s\n", "Entring..."); + info(DRIVER_DESC " " DRIVER_VERSION); + + /* Register with the usb */ + retval = usb_register(&io_driver); + + if (retval) + goto failed_usb_register; + + if (retval == 0) { + dbg("%s\n", "Leaving..."); + return 0; + } + + failed_usb_register: + usb_serial_deregister(&moschip7840_4port_device); + + failed_port_device_register: + + return retval; +} + +/**************************************************************************** + * moschip7840_exit + * Called when the driver is about to be unloaded. + ****************************************************************************/ +static void __exit moschip7840_exit(void) +{ + + dbg("%s \n", " mos7840_exit :entering.........."); + + usb_deregister(&io_driver); + + usb_serial_deregister(&moschip7840_4port_device); + + dbg("%s\n", "Entring..."); +} + +module_init(moschip7840_init); +module_exit(moschip7840_exit); + +/* Module information */ +MODULE_DESCRIPTION(DRIVER_DESC); +MODULE_LICENSE("GPL"); + +module_param(debug, bool, S_IRUGO | S_IWUSR); +MODULE_PARM_DESC(debug, "Debug enabled or not"); diff --git a/drivers/usb/serial/pl2303.c b/drivers/usb/serial/pl2303.c index 65e4d046951..1036d436ed2 100644 --- a/drivers/usb/serial/pl2303.c +++ b/drivers/usb/serial/pl2303.c @@ -81,10 +81,11 @@ static struct usb_device_id id_table [] = { { USB_DEVICE(SPEEDDRAGON_VENDOR_ID, SPEEDDRAGON_PRODUCT_ID) }, { USB_DEVICE(DATAPILOT_U2_VENDOR_ID, DATAPILOT_U2_PRODUCT_ID) }, { USB_DEVICE(BELKIN_VENDOR_ID, BELKIN_PRODUCT_ID) }, + { USB_DEVICE(ALCOR_VENDOR_ID, ALCOR_PRODUCT_ID) }, { } /* Terminating entry */ }; -MODULE_DEVICE_TABLE (usb, id_table); +MODULE_DEVICE_TABLE(usb, id_table); static struct usb_driver pl2303_driver = { .name = "pl2303", @@ -127,65 +128,6 @@ static struct usb_driver pl2303_driver = { #define UART_OVERRUN_ERROR 0x40 #define UART_CTS 0x80 -/* function prototypes for a PL2303 serial converter */ -static int pl2303_open (struct usb_serial_port *port, struct file *filp); -static void pl2303_close (struct usb_serial_port *port, struct file *filp); -static void pl2303_set_termios (struct usb_serial_port *port, - struct termios *old); -static int pl2303_ioctl (struct usb_serial_port *port, struct file *file, - unsigned int cmd, unsigned long arg); -static void pl2303_read_int_callback (struct urb *urb, struct pt_regs *regs); -static void pl2303_read_bulk_callback (struct urb *urb, struct pt_regs *regs); -static void pl2303_write_bulk_callback (struct urb *urb, struct pt_regs *regs); -static int pl2303_write (struct usb_serial_port *port, - const unsigned char *buf, int count); -static void pl2303_send (struct usb_serial_port *port); -static int pl2303_write_room(struct usb_serial_port *port); -static int pl2303_chars_in_buffer(struct usb_serial_port *port); -static void pl2303_break_ctl(struct usb_serial_port *port,int break_state); -static int pl2303_tiocmget (struct usb_serial_port *port, struct file *file); -static int pl2303_tiocmset (struct usb_serial_port *port, struct file *file, - unsigned int set, unsigned int clear); -static int pl2303_startup (struct usb_serial *serial); -static void pl2303_shutdown (struct usb_serial *serial); -static struct pl2303_buf *pl2303_buf_alloc(unsigned int size); -static void pl2303_buf_free(struct pl2303_buf *pb); -static void pl2303_buf_clear(struct pl2303_buf *pb); -static unsigned int pl2303_buf_data_avail(struct pl2303_buf *pb); -static unsigned int pl2303_buf_space_avail(struct pl2303_buf *pb); -static unsigned int pl2303_buf_put(struct pl2303_buf *pb, const char *buf, - unsigned int count); -static unsigned int pl2303_buf_get(struct pl2303_buf *pb, char *buf, - unsigned int count); - - -/* All of the device info needed for the PL2303 SIO serial converter */ -static struct usb_serial_driver pl2303_device = { - .driver = { - .owner = THIS_MODULE, - .name = "pl2303", - }, - .id_table = id_table, - .num_interrupt_in = NUM_DONT_CARE, - .num_bulk_in = 1, - .num_bulk_out = 1, - .num_ports = 1, - .open = pl2303_open, - .close = pl2303_close, - .write = pl2303_write, - .ioctl = pl2303_ioctl, - .break_ctl = pl2303_break_ctl, - .set_termios = pl2303_set_termios, - .tiocmget = pl2303_tiocmget, - .tiocmset = pl2303_tiocmset, - .read_bulk_callback = pl2303_read_bulk_callback, - .read_int_callback = pl2303_read_int_callback, - .write_bulk_callback = pl2303_write_bulk_callback, - .write_room = pl2303_write_room, - .chars_in_buffer = pl2303_chars_in_buffer, - .attach = pl2303_startup, - .shutdown = pl2303_shutdown, -}; enum pl2303_type { type_0, /* don't know the difference between type 0 and */ @@ -204,8 +146,166 @@ struct pl2303_private { enum pl2303_type type; }; +/* + * pl2303_buf_alloc + * + * Allocate a circular buffer and all associated memory. + */ +static struct pl2303_buf *pl2303_buf_alloc(unsigned int size) +{ + struct pl2303_buf *pb; + + if (size == 0) + return NULL; + + pb = (struct pl2303_buf *)kmalloc(sizeof(struct pl2303_buf), GFP_KERNEL); + if (pb == NULL) + return NULL; + + pb->buf_buf = kmalloc(size, GFP_KERNEL); + if (pb->buf_buf == NULL) { + kfree(pb); + return NULL; + } + + pb->buf_size = size; + pb->buf_get = pb->buf_put = pb->buf_buf; -static int pl2303_startup (struct usb_serial *serial) + return pb; +} + +/* + * pl2303_buf_free + * + * Free the buffer and all associated memory. + */ +static void pl2303_buf_free(struct pl2303_buf *pb) +{ + if (pb) { + kfree(pb->buf_buf); + kfree(pb); + } +} + +/* + * pl2303_buf_clear + * + * Clear out all data in the circular buffer. + */ +static void pl2303_buf_clear(struct pl2303_buf *pb) +{ + if (pb != NULL) + pb->buf_get = pb->buf_put; + /* equivalent to a get of all data available */ +} + +/* + * pl2303_buf_data_avail + * + * Return the number of bytes of data available in the circular + * buffer. + */ +static unsigned int pl2303_buf_data_avail(struct pl2303_buf *pb) +{ + if (pb == NULL) + return 0; + + return ((pb->buf_size + pb->buf_put - pb->buf_get) % pb->buf_size); +} + +/* + * pl2303_buf_space_avail + * + * Return the number of bytes of space available in the circular + * buffer. + */ +static unsigned int pl2303_buf_space_avail(struct pl2303_buf *pb) +{ + if (pb == NULL) + return 0; + + return ((pb->buf_size + pb->buf_get - pb->buf_put - 1) % pb->buf_size); +} + +/* + * pl2303_buf_put + * + * Copy data data from a user buffer and put it into the circular buffer. + * Restrict to the amount of space available. + * + * Return the number of bytes copied. + */ +static unsigned int pl2303_buf_put(struct pl2303_buf *pb, const char *buf, + unsigned int count) +{ + unsigned int len; + + if (pb == NULL) + return 0; + + len = pl2303_buf_space_avail(pb); + if (count > len) + count = len; + + if (count == 0) + return 0; + + len = pb->buf_buf + pb->buf_size - pb->buf_put; + if (count > len) { + memcpy(pb->buf_put, buf, len); + memcpy(pb->buf_buf, buf+len, count - len); + pb->buf_put = pb->buf_buf + count - len; + } else { + memcpy(pb->buf_put, buf, count); + if (count < len) + pb->buf_put += count; + else /* count == len */ + pb->buf_put = pb->buf_buf; + } + + return count; +} + +/* + * pl2303_buf_get + * + * Get data from the circular buffer and copy to the given buffer. + * Restrict to the amount of data available. + * + * Return the number of bytes copied. + */ +static unsigned int pl2303_buf_get(struct pl2303_buf *pb, char *buf, + unsigned int count) +{ + unsigned int len; + + if (pb == NULL) + return 0; + + len = pl2303_buf_data_avail(pb); + if (count > len) + count = len; + + if (count == 0) + return 0; + + len = pb->buf_buf + pb->buf_size - pb->buf_get; + if (count > len) { + memcpy(buf, pb->buf_get, len); + memcpy(buf+len, pb->buf_buf, count - len); + pb->buf_get = pb->buf_buf + count - len; + } else { + memcpy(buf, pb->buf_get, count); + if (count < len) + pb->buf_get += count; + else /* count == len */ + pb->buf_get = pb->buf_buf; + } + + return count; +} + +static int pl2303_startup(struct usb_serial *serial) { struct pl2303_private *priv; enum pl2303_type type = type_0; @@ -247,36 +347,17 @@ cleanup: return -ENOMEM; } -static int set_control_lines (struct usb_device *dev, u8 value) +static int set_control_lines(struct usb_device *dev, u8 value) { int retval; - retval = usb_control_msg (dev, usb_sndctrlpipe (dev, 0), - SET_CONTROL_REQUEST, SET_CONTROL_REQUEST_TYPE, - value, 0, NULL, 0, 100); + retval = usb_control_msg(dev, usb_sndctrlpipe(dev, 0), + SET_CONTROL_REQUEST, SET_CONTROL_REQUEST_TYPE, + value, 0, NULL, 0, 100); dbg("%s - value = %d, retval = %d", __FUNCTION__, value, retval); return retval; } -static int pl2303_write (struct usb_serial_port *port, const unsigned char *buf, int count) -{ - struct pl2303_private *priv = usb_get_serial_port_data(port); - unsigned long flags; - - dbg("%s - port %d, %d bytes", __FUNCTION__, port->number, count); - - if (!count) - return count; - - spin_lock_irqsave(&priv->lock, flags); - count = pl2303_buf_put(priv->buf, buf, count); - spin_unlock_irqrestore(&priv->lock, flags); - - pl2303_send(port); - - return count; -} - static void pl2303_send(struct usb_serial_port *port) { int count, result; @@ -293,7 +374,7 @@ static void pl2303_send(struct usb_serial_port *port) } count = pl2303_buf_get(priv->buf, port->write_urb->transfer_buffer, - port->bulk_out_size); + port->bulk_out_size); if (count == 0) { spin_unlock_irqrestore(&priv->lock, flags); @@ -304,13 +385,15 @@ static void pl2303_send(struct usb_serial_port *port) spin_unlock_irqrestore(&priv->lock, flags); - usb_serial_debug_data(debug, &port->dev, __FUNCTION__, count, port->write_urb->transfer_buffer); + usb_serial_debug_data(debug, &port->dev, __FUNCTION__, count, + port->write_urb->transfer_buffer); port->write_urb->transfer_buffer_length = count; port->write_urb->dev = port->serial->dev; - result = usb_submit_urb (port->write_urb, GFP_ATOMIC); + result = usb_submit_urb(port->write_urb, GFP_ATOMIC); if (result) { - dev_err(&port->dev, "%s - failed submitting write urb, error %d\n", __FUNCTION__, result); + dev_err(&port->dev, "%s - failed submitting write urb," + " error %d\n", __FUNCTION__, result); priv->write_urb_in_use = 0; // TODO: reschedule pl2303_send } @@ -318,6 +401,26 @@ static void pl2303_send(struct usb_serial_port *port) usb_serial_port_softint(port); } +static int pl2303_write(struct usb_serial_port *port, const unsigned char *buf, + int count) +{ + struct pl2303_private *priv = usb_get_serial_port_data(port); + unsigned long flags; + + dbg("%s - port %d, %d bytes", __FUNCTION__, port->number, count); + + if (!count) + return count; + + spin_lock_irqsave(&priv->lock, flags); + count = pl2303_buf_put(priv->buf, buf, count); + spin_unlock_irqrestore(&priv->lock, flags); + + pl2303_send(port); + + return count; +} + static int pl2303_write_room(struct usb_serial_port *port) { struct pl2303_private *priv = usb_get_serial_port_data(port); @@ -350,7 +453,8 @@ static int pl2303_chars_in_buffer(struct usb_serial_port *port) return chars; } -static void pl2303_set_termios (struct usb_serial_port *port, struct termios *old_termios) +static void pl2303_set_termios(struct usb_serial_port *port, + struct termios *old_termios) { struct usb_serial *serial = port->serial; struct pl2303_private *priv = usb_get_serial_port_data(port); @@ -371,7 +475,8 @@ static void pl2303_set_termios (struct usb_serial_port *port, struct termios *ol spin_lock_irqsave(&priv->lock, flags); if (!priv->termios_initialized) { *(port->tty->termios) = tty_std_termios; - port->tty->termios->c_cflag = B9600 | CS8 | CREAD | HUPCL | CLOCAL; + port->tty->termios->c_cflag = B9600 | CS8 | CREAD | + HUPCL | CLOCAL; priv->termios_initialized = 1; } spin_unlock_irqrestore(&priv->lock, flags); @@ -380,24 +485,24 @@ static void pl2303_set_termios (struct usb_serial_port *port, struct termios *ol /* check that they really want us to change something */ if (old_termios) { if ((cflag == old_termios->c_cflag) && - (RELEVANT_IFLAG(port->tty->termios->c_iflag) == RELEVANT_IFLAG(old_termios->c_iflag))) { - dbg("%s - nothing to change...", __FUNCTION__); - return; + (RELEVANT_IFLAG(port->tty->termios->c_iflag) == + RELEVANT_IFLAG(old_termios->c_iflag))) { + dbg("%s - nothing to change...", __FUNCTION__); + return; } } - buf = kzalloc (7, GFP_KERNEL); + buf = kzalloc(7, GFP_KERNEL); if (!buf) { dev_err(&port->dev, "%s - out of memory.\n", __FUNCTION__); return; } - - i = usb_control_msg (serial->dev, usb_rcvctrlpipe (serial->dev, 0), - GET_LINE_REQUEST, GET_LINE_REQUEST_TYPE, - 0, 0, buf, 7, 100); - dbg ("0xa1:0x21:0:0 %d - %x %x %x %x %x %x %x", i, - buf[0], buf[1], buf[2], buf[3], buf[4], buf[5], buf[6]); + i = usb_control_msg(serial->dev, usb_rcvctrlpipe(serial->dev, 0), + GET_LINE_REQUEST, GET_LINE_REQUEST_TYPE, + 0, 0, buf, 7, 100); + dbg("0xa1:0x21:0:0 %d - %x %x %x %x %x %x %x", i, + buf[0], buf[1], buf[2], buf[3], buf[4], buf[5], buf[6]); if (cflag & CSIZE) { switch (cflag & CSIZE) { @@ -429,7 +534,8 @@ static void pl2303_set_termios (struct usb_serial_port *port, struct termios *ol case B230400: baud = 230400; break; case B460800: baud = 460800; break; default: - dev_err(&port->dev, "pl2303 driver does not support the baudrate requested (fix it)\n"); + dev_err(&port->dev, "pl2303 driver does not support" + " the baudrate requested (fix it)\n"); break; } dbg("%s - baud = %d", __FUNCTION__, baud); @@ -469,10 +575,10 @@ static void pl2303_set_termios (struct usb_serial_port *port, struct termios *ol dbg("%s - parity = none", __FUNCTION__); } - i = usb_control_msg (serial->dev, usb_sndctrlpipe (serial->dev, 0), - SET_LINE_REQUEST, SET_LINE_REQUEST_TYPE, - 0, 0, buf, 7, 100); - dbg ("0x21:0x20:0:0 %d", i); + i = usb_control_msg(serial->dev, usb_sndctrlpipe(serial->dev, 0), + SET_LINE_REQUEST, SET_LINE_REQUEST_TYPE, + 0, 0, buf, 7, 100); + dbg("0x21:0x20:0:0 %d", i); /* change control lines if we are switching to or from B0 */ spin_lock_irqsave(&priv->lock, flags); @@ -488,13 +594,13 @@ static void pl2303_set_termios (struct usb_serial_port *port, struct termios *ol } else { spin_unlock_irqrestore(&priv->lock, flags); } - + buf[0] = buf[1] = buf[2] = buf[3] = buf[4] = buf[5] = buf[6] = 0; - i = usb_control_msg (serial->dev, usb_rcvctrlpipe (serial->dev, 0), - GET_LINE_REQUEST, GET_LINE_REQUEST_TYPE, - 0, 0, buf, 7, 100); - dbg ("0xa1:0x21:0:0 %d - %x %x %x %x %x %x %x", i, + i = usb_control_msg(serial->dev, usb_rcvctrlpipe(serial->dev, 0), + GET_LINE_REQUEST, GET_LINE_REQUEST_TYPE, + 0, 0, buf, 7, 100); + dbg("0xa1:0x21:0:0 %d - %x %x %x %x %x %x %x", i, buf[0], buf[1], buf[2], buf[3], buf[4], buf[5], buf[6]); if (cflag & CRTSCTS) { @@ -503,18 +609,82 @@ static void pl2303_set_termios (struct usb_serial_port *port, struct termios *ol index = 0x61; else index = 0x41; - i = usb_control_msg(serial->dev, + i = usb_control_msg(serial->dev, usb_sndctrlpipe(serial->dev, 0), VENDOR_WRITE_REQUEST, VENDOR_WRITE_REQUEST_TYPE, 0x0, index, NULL, 0, 100); - dbg ("0x40:0x1:0x0:0x%x %d", index, i); + dbg("0x40:0x1:0x0:0x%x %d", index, i); + } + + kfree(buf); +} + +static void pl2303_close(struct usb_serial_port *port, struct file *filp) +{ + struct pl2303_private *priv = usb_get_serial_port_data(port); + unsigned long flags; + unsigned int c_cflag; + int bps; + long timeout; + wait_queue_t wait; + + dbg("%s - port %d", __FUNCTION__, port->number); + + /* wait for data to drain from the buffer */ + spin_lock_irqsave(&priv->lock, flags); + timeout = PL2303_CLOSING_WAIT; + init_waitqueue_entry(&wait, current); + add_wait_queue(&port->tty->write_wait, &wait); + for (;;) { + set_current_state(TASK_INTERRUPTIBLE); + if (pl2303_buf_data_avail(priv->buf) == 0 || + timeout == 0 || signal_pending(current) || + !usb_get_intfdata(port->serial->interface)) /* disconnect */ + break; + spin_unlock_irqrestore(&priv->lock, flags); + timeout = schedule_timeout(timeout); + spin_lock_irqsave(&priv->lock, flags); } + set_current_state(TASK_RUNNING); + remove_wait_queue(&port->tty->write_wait, &wait); + /* clear out any remaining data in the buffer */ + pl2303_buf_clear(priv->buf); + spin_unlock_irqrestore(&priv->lock, flags); + + /* wait for characters to drain from the device */ + /* (this is long enough for the entire 256 byte */ + /* pl2303 hardware buffer to drain with no flow */ + /* control for data rates of 1200 bps or more, */ + /* for lower rates we should really know how much */ + /* data is in the buffer to compute a delay */ + /* that is not unnecessarily long) */ + bps = tty_get_baud_rate(port->tty); + if (bps > 1200) + timeout = max((HZ*2560)/bps,HZ/10); + else + timeout = 2*HZ; + schedule_timeout_interruptible(timeout); - kfree (buf); + /* shutdown our urbs */ + dbg("%s - shutting down urbs", __FUNCTION__); + usb_kill_urb(port->write_urb); + usb_kill_urb(port->read_urb); + usb_kill_urb(port->interrupt_in_urb); + + if (port->tty) { + c_cflag = port->tty->termios->c_cflag; + if (c_cflag & HUPCL) { + /* drop DTR and RTS */ + spin_lock_irqsave(&priv->lock, flags); + priv->line_control = 0; + spin_unlock_irqrestore(&priv->lock, flags); + set_control_lines(port->serial->dev, 0); + } + } } -static int pl2303_open (struct usb_serial_port *port, struct file *filp) +static int pl2303_open(struct usb_serial_port *port, struct file *filp) { struct termios tmp_termios; struct usb_serial *serial = port->serial; @@ -568,98 +738,35 @@ static int pl2303_open (struct usb_serial_port *port, struct file *filp) /* Setup termios */ if (port->tty) { - pl2303_set_termios (port, &tmp_termios); + pl2303_set_termios(port, &tmp_termios); } //FIXME: need to assert RTS and DTR if CRTSCTS off dbg("%s - submitting read urb", __FUNCTION__); port->read_urb->dev = serial->dev; - result = usb_submit_urb (port->read_urb, GFP_KERNEL); + result = usb_submit_urb(port->read_urb, GFP_KERNEL); if (result) { - dev_err(&port->dev, "%s - failed submitting read urb, error %d\n", __FUNCTION__, result); - pl2303_close (port, NULL); + dev_err(&port->dev, "%s - failed submitting read urb," + " error %d\n", __FUNCTION__, result); + pl2303_close(port, NULL); return -EPROTO; } dbg("%s - submitting interrupt urb", __FUNCTION__); port->interrupt_in_urb->dev = serial->dev; - result = usb_submit_urb (port->interrupt_in_urb, GFP_KERNEL); + result = usb_submit_urb(port->interrupt_in_urb, GFP_KERNEL); if (result) { - dev_err(&port->dev, "%s - failed submitting interrupt urb, error %d\n", __FUNCTION__, result); - pl2303_close (port, NULL); + dev_err(&port->dev, "%s - failed submitting interrupt urb," + " error %d\n", __FUNCTION__, result); + pl2303_close(port, NULL); return -EPROTO; } return 0; } - -static void pl2303_close (struct usb_serial_port *port, struct file *filp) -{ - struct pl2303_private *priv = usb_get_serial_port_data(port); - unsigned long flags; - unsigned int c_cflag; - int bps; - long timeout; - wait_queue_t wait; - - dbg("%s - port %d", __FUNCTION__, port->number); - - /* wait for data to drain from the buffer */ - spin_lock_irqsave(&priv->lock, flags); - timeout = PL2303_CLOSING_WAIT; - init_waitqueue_entry(&wait, current); - add_wait_queue(&port->tty->write_wait, &wait); - for (;;) { - set_current_state(TASK_INTERRUPTIBLE); - if (pl2303_buf_data_avail(priv->buf) == 0 - || timeout == 0 || signal_pending(current) - || !usb_get_intfdata(port->serial->interface)) /* disconnect */ - break; - spin_unlock_irqrestore(&priv->lock, flags); - timeout = schedule_timeout(timeout); - spin_lock_irqsave(&priv->lock, flags); - } - set_current_state(TASK_RUNNING); - remove_wait_queue(&port->tty->write_wait, &wait); - /* clear out any remaining data in the buffer */ - pl2303_buf_clear(priv->buf); - spin_unlock_irqrestore(&priv->lock, flags); - - /* wait for characters to drain from the device */ - /* (this is long enough for the entire 256 byte */ - /* pl2303 hardware buffer to drain with no flow */ - /* control for data rates of 1200 bps or more, */ - /* for lower rates we should really know how much */ - /* data is in the buffer to compute a delay */ - /* that is not unnecessarily long) */ - bps = tty_get_baud_rate(port->tty); - if (bps > 1200) - timeout = max((HZ*2560)/bps,HZ/10); - else - timeout = 2*HZ; - schedule_timeout_interruptible(timeout); - - /* shutdown our urbs */ - dbg("%s - shutting down urbs", __FUNCTION__); - usb_kill_urb(port->write_urb); - usb_kill_urb(port->read_urb); - usb_kill_urb(port->interrupt_in_urb); - - if (port->tty) { - c_cflag = port->tty->termios->c_cflag; - if (c_cflag & HUPCL) { - /* drop DTR and RTS */ - spin_lock_irqsave(&priv->lock, flags); - priv->line_control = 0; - spin_unlock_irqrestore (&priv->lock, flags); - set_control_lines (port->serial->dev, 0); - } - } -} - -static int pl2303_tiocmset (struct usb_serial_port *port, struct file *file, - unsigned int set, unsigned int clear) +static int pl2303_tiocmset(struct usb_serial_port *port, struct file *file, + unsigned int set, unsigned int clear) { struct pl2303_private *priv = usb_get_serial_port_data(port); unsigned long flags; @@ -668,7 +775,7 @@ static int pl2303_tiocmset (struct usb_serial_port *port, struct file *file, if (!usb_get_intfdata(port->serial->interface)) return -ENODEV; - spin_lock_irqsave (&priv->lock, flags); + spin_lock_irqsave(&priv->lock, flags); if (set & TIOCM_RTS) priv->line_control |= CONTROL_RTS; if (set & TIOCM_DTR) @@ -678,12 +785,12 @@ static int pl2303_tiocmset (struct usb_serial_port *port, struct file *file, if (clear & TIOCM_DTR) priv->line_control &= ~CONTROL_DTR; control = priv->line_control; - spin_unlock_irqrestore (&priv->lock, flags); + spin_unlock_irqrestore(&priv->lock, flags); - return set_control_lines (port->serial->dev, control); + return set_control_lines(port->serial->dev, control); } -static int pl2303_tiocmget (struct usb_serial_port *port, struct file *file) +static int pl2303_tiocmget(struct usb_serial_port *port, struct file *file) { struct pl2303_private *priv = usb_get_serial_port_data(port); unsigned long flags; @@ -696,10 +803,10 @@ static int pl2303_tiocmget (struct usb_serial_port *port, struct file *file) if (!usb_get_intfdata(port->serial->interface)) return -ENODEV; - spin_lock_irqsave (&priv->lock, flags); + spin_lock_irqsave(&priv->lock, flags); mcr = priv->line_control; status = priv->line_status; - spin_unlock_irqrestore (&priv->lock, flags); + spin_unlock_irqrestore(&priv->lock, flags); result = ((mcr & CONTROL_DTR) ? TIOCM_DTR : 0) | ((mcr & CONTROL_RTS) ? TIOCM_RTS : 0) @@ -721,22 +828,22 @@ static int wait_modem_info(struct usb_serial_port *port, unsigned int arg) unsigned int status; unsigned int changed; - spin_lock_irqsave (&priv->lock, flags); + spin_lock_irqsave(&priv->lock, flags); prevstatus = priv->line_status; - spin_unlock_irqrestore (&priv->lock, flags); + spin_unlock_irqrestore(&priv->lock, flags); while (1) { interruptible_sleep_on(&priv->delta_msr_wait); /* see if a signal did it */ if (signal_pending(current)) return -ERESTARTSYS; - - spin_lock_irqsave (&priv->lock, flags); + + spin_lock_irqsave(&priv->lock, flags); status = priv->line_status; - spin_unlock_irqrestore (&priv->lock, flags); - + spin_unlock_irqrestore(&priv->lock, flags); + changed=prevstatus^status; - + if (((arg & TIOCM_RNG) && (changed & UART_RING)) || ((arg & TIOCM_DSR) && (changed & UART_DSR)) || ((arg & TIOCM_CD) && (changed & UART_DCD)) || @@ -749,7 +856,8 @@ static int wait_modem_info(struct usb_serial_port *port, unsigned int arg) return 0; } -static int pl2303_ioctl (struct usb_serial_port *port, struct file *file, unsigned int cmd, unsigned long arg) +static int pl2303_ioctl(struct usb_serial_port *port, struct file *file, + unsigned int cmd, unsigned long arg) { dbg("%s (%d) cmd = 0x%04x", __FUNCTION__, port->number, cmd); @@ -766,7 +874,7 @@ static int pl2303_ioctl (struct usb_serial_port *port, struct file *file, unsign return -ENOIOCTLCMD; } -static void pl2303_break_ctl (struct usb_serial_port *port, int break_state) +static void pl2303_break_ctl(struct usb_serial_port *port, int break_state) { struct usb_serial *serial = port->serial; u16 state; @@ -780,15 +888,14 @@ static void pl2303_break_ctl (struct usb_serial_port *port, int break_state) state = BREAK_ON; dbg("%s - turning break %s", __FUNCTION__, state==BREAK_OFF ? "off" : "on"); - result = usb_control_msg (serial->dev, usb_sndctrlpipe (serial->dev, 0), - BREAK_REQUEST, BREAK_REQUEST_TYPE, state, - 0, NULL, 0, 100); + result = usb_control_msg(serial->dev, usb_sndctrlpipe(serial->dev, 0), + BREAK_REQUEST, BREAK_REQUEST_TYPE, state, + 0, NULL, 0, 100); if (result) dbg("%s - error sending break = %d", __FUNCTION__, result); } - -static void pl2303_shutdown (struct usb_serial *serial) +static void pl2303_shutdown(struct usb_serial *serial) { int i; struct pl2303_private *priv; @@ -802,7 +909,7 @@ static void pl2303_shutdown (struct usb_serial *serial) kfree(priv); usb_set_serial_port_data(serial->port[i], NULL); } - } + } } static void pl2303_update_line_status(struct usb_serial_port *port, @@ -814,29 +921,33 @@ static void pl2303_update_line_status(struct usb_serial_port *port, unsigned long flags; u8 status_idx = UART_STATE; u8 length = UART_STATE + 1; + u16 idv, idp; + + idv = le16_to_cpu(port->serial->dev->descriptor.idVendor); + idp = le16_to_cpu(port->serial->dev->descriptor.idProduct); - if ((le16_to_cpu(port->serial->dev->descriptor.idVendor) == SIEMENS_VENDOR_ID) && - (le16_to_cpu(port->serial->dev->descriptor.idProduct) == SIEMENS_PRODUCT_ID_X65 || - le16_to_cpu(port->serial->dev->descriptor.idProduct) == SIEMENS_PRODUCT_ID_SX1 || - le16_to_cpu(port->serial->dev->descriptor.idProduct) == SIEMENS_PRODUCT_ID_X75)) { - length = 1; - status_idx = 0; + + if (idv == SIEMENS_VENDOR_ID) { + if (idp == SIEMENS_PRODUCT_ID_X65 || + idp == SIEMENS_PRODUCT_ID_SX1 || + idp == SIEMENS_PRODUCT_ID_X75) { + + length = 1; + status_idx = 0; + } } if (actual_length < length) - goto exit; + return; /* Save off the uart status for others to look at */ spin_lock_irqsave(&priv->lock, flags); priv->line_status = data[status_idx]; spin_unlock_irqrestore(&priv->lock, flags); - wake_up_interruptible (&priv->delta_msr_wait); - -exit: - return; + wake_up_interruptible(&priv->delta_msr_wait); } -static void pl2303_read_int_callback (struct urb *urb, struct pt_regs *regs) +static void pl2303_read_int_callback(struct urb *urb, struct pt_regs *regs) { struct usb_serial_port *port = (struct usb_serial_port *) urb->context; unsigned char *data = urb->transfer_buffer; @@ -853,25 +964,29 @@ static void pl2303_read_int_callback (struct urb *urb, struct pt_regs *regs) case -ENOENT: case -ESHUTDOWN: /* this urb is terminated, clean up */ - dbg("%s - urb shutting down with status: %d", __FUNCTION__, urb->status); + dbg("%s - urb shutting down with status: %d", __FUNCTION__, + urb->status); return; default: - dbg("%s - nonzero urb status received: %d", __FUNCTION__, urb->status); + dbg("%s - nonzero urb status received: %d", __FUNCTION__, + urb->status); goto exit; } - usb_serial_debug_data(debug, &port->dev, __FUNCTION__, urb->actual_length, urb->transfer_buffer); + usb_serial_debug_data(debug, &port->dev, __FUNCTION__, + urb->actual_length, urb->transfer_buffer); + pl2303_update_line_status(port, data, actual_length); exit: - status = usb_submit_urb (urb, GFP_ATOMIC); + status = usb_submit_urb(urb, GFP_ATOMIC); if (status) - dev_err(&urb->dev->dev, "%s - usb_submit_urb failed with result %d\n", + dev_err(&urb->dev->dev, + "%s - usb_submit_urb failed with result %d\n", __FUNCTION__, status); } - -static void pl2303_read_bulk_callback (struct urb *urb, struct pt_regs *regs) +static void pl2303_read_bulk_callback(struct urb *urb, struct pt_regs *regs) { struct usb_serial_port *port = (struct usb_serial_port *) urb->context; struct pl2303_private *priv = usb_get_serial_port_data(port); @@ -892,20 +1007,25 @@ static void pl2303_read_bulk_callback (struct urb *urb, struct pt_regs *regs) return; } if (urb->status == -EPROTO) { - /* PL2303 mysteriously fails with -EPROTO reschedule the read */ - dbg("%s - caught -EPROTO, resubmitting the urb", __FUNCTION__); + /* PL2303 mysteriously fails with -EPROTO reschedule + * the read */ + dbg("%s - caught -EPROTO, resubmitting the urb", + __FUNCTION__); urb->status = 0; urb->dev = port->serial->dev; result = usb_submit_urb(urb, GFP_ATOMIC); if (result) - dev_err(&urb->dev->dev, "%s - failed resubmitting read urb, error %d\n", __FUNCTION__, result); + dev_err(&urb->dev->dev, "%s - failed" + " resubmitting read urb, error %d\n", + __FUNCTION__, result); return; } dbg("%s - unable to handle the error, exiting.", __FUNCTION__); return; } - usb_serial_debug_data(debug, &port->dev, __FUNCTION__, urb->actual_length, data); + usb_serial_debug_data(debug, &port->dev, __FUNCTION__, + urb->actual_length, data); /* get tty_flag from status */ tty_flag = TTY_NORMAL; @@ -914,7 +1034,7 @@ static void pl2303_read_bulk_callback (struct urb *urb, struct pt_regs *regs) status = priv->line_status; priv->line_status &= ~UART_STATE_TRANSIENT_MASK; spin_unlock_irqrestore(&priv->lock, flags); - wake_up_interruptible (&priv->delta_msr_wait); + wake_up_interruptible(&priv->delta_msr_wait); /* break takes precedence over parity, */ /* which takes precedence over framing errors */ @@ -933,8 +1053,8 @@ static void pl2303_read_bulk_callback (struct urb *urb, struct pt_regs *regs) if (status & UART_OVERRUN_ERROR) tty_insert_flip_char(tty, 0, TTY_OVERRUN); for (i = 0; i < urb->actual_length; ++i) - tty_insert_flip_char (tty, data[i], tty_flag); - tty_flip_buffer_push (tty); + tty_insert_flip_char(tty, data[i], tty_flag); + tty_flip_buffer_push(tty); } /* Schedule the next read _if_ we are still open */ @@ -942,15 +1062,14 @@ static void pl2303_read_bulk_callback (struct urb *urb, struct pt_regs *regs) urb->dev = port->serial->dev; result = usb_submit_urb(urb, GFP_ATOMIC); if (result) - dev_err(&urb->dev->dev, "%s - failed resubmitting read urb, error %d\n", __FUNCTION__, result); + dev_err(&urb->dev->dev, "%s - failed resubmitting" + " read urb, error %d\n", __FUNCTION__, result); } return; } - - -static void pl2303_write_bulk_callback (struct urb *urb, struct pt_regs *regs) +static void pl2303_write_bulk_callback(struct urb *urb, struct pt_regs *regs) { struct usb_serial_port *port = (struct usb_serial_port *) urb->context; struct pl2303_private *priv = usb_get_serial_port_data(port); @@ -966,18 +1085,21 @@ static void pl2303_write_bulk_callback (struct urb *urb, struct pt_regs *regs) case -ENOENT: case -ESHUTDOWN: /* this urb is terminated, clean up */ - dbg("%s - urb shutting down with status: %d", __FUNCTION__, urb->status); + dbg("%s - urb shutting down with status: %d", __FUNCTION__, + urb->status); priv->write_urb_in_use = 0; return; default: /* error in the urb, so we have to resubmit it */ dbg("%s - Overflow in write", __FUNCTION__); - dbg("%s - nonzero write bulk status received: %d", __FUNCTION__, urb->status); + dbg("%s - nonzero write bulk status received: %d", __FUNCTION__, + urb->status); port->write_urb->transfer_buffer_length = 1; port->write_urb->dev = port->serial->dev; - result = usb_submit_urb (port->write_urb, GFP_ATOMIC); + result = usb_submit_urb(port->write_urb, GFP_ATOMIC); if (result) - dev_err(&urb->dev->dev, "%s - failed resubmitting write urb, error %d\n", __FUNCTION__, result); + dev_err(&urb->dev->dev, "%s - failed resubmitting write" + " urb, error %d\n", __FUNCTION__, result); else return; } @@ -988,191 +1110,38 @@ static void pl2303_write_bulk_callback (struct urb *urb, struct pt_regs *regs) pl2303_send(port); } +/* All of the device info needed for the PL2303 SIO serial converter */ +static struct usb_serial_driver pl2303_device = { + .driver = { + .owner = THIS_MODULE, + .name = "pl2303", + }, + .id_table = id_table, + .num_interrupt_in = NUM_DONT_CARE, + .num_bulk_in = 1, + .num_bulk_out = 1, + .num_ports = 1, + .open = pl2303_open, + .close = pl2303_close, + .write = pl2303_write, + .ioctl = pl2303_ioctl, + .break_ctl = pl2303_break_ctl, + .set_termios = pl2303_set_termios, + .tiocmget = pl2303_tiocmget, + .tiocmset = pl2303_tiocmset, + .read_bulk_callback = pl2303_read_bulk_callback, + .read_int_callback = pl2303_read_int_callback, + .write_bulk_callback = pl2303_write_bulk_callback, + .write_room = pl2303_write_room, + .chars_in_buffer = pl2303_chars_in_buffer, + .attach = pl2303_startup, + .shutdown = pl2303_shutdown, +}; -/* - * pl2303_buf_alloc - * - * Allocate a circular buffer and all associated memory. - */ - -static struct pl2303_buf *pl2303_buf_alloc(unsigned int size) -{ - - struct pl2303_buf *pb; - - - if (size == 0) - return NULL; - - pb = (struct pl2303_buf *)kmalloc(sizeof(struct pl2303_buf), GFP_KERNEL); - if (pb == NULL) - return NULL; - - pb->buf_buf = kmalloc(size, GFP_KERNEL); - if (pb->buf_buf == NULL) { - kfree(pb); - return NULL; - } - - pb->buf_size = size; - pb->buf_get = pb->buf_put = pb->buf_buf; - - return pb; - -} - - -/* - * pl2303_buf_free - * - * Free the buffer and all associated memory. - */ - -static void pl2303_buf_free(struct pl2303_buf *pb) -{ - if (pb) { - kfree(pb->buf_buf); - kfree(pb); - } -} - - -/* - * pl2303_buf_clear - * - * Clear out all data in the circular buffer. - */ - -static void pl2303_buf_clear(struct pl2303_buf *pb) -{ - if (pb != NULL) - pb->buf_get = pb->buf_put; - /* equivalent to a get of all data available */ -} - - -/* - * pl2303_buf_data_avail - * - * Return the number of bytes of data available in the circular - * buffer. - */ - -static unsigned int pl2303_buf_data_avail(struct pl2303_buf *pb) -{ - if (pb != NULL) - return ((pb->buf_size + pb->buf_put - pb->buf_get) % pb->buf_size); - else - return 0; -} - - -/* - * pl2303_buf_space_avail - * - * Return the number of bytes of space available in the circular - * buffer. - */ - -static unsigned int pl2303_buf_space_avail(struct pl2303_buf *pb) -{ - if (pb != NULL) - return ((pb->buf_size + pb->buf_get - pb->buf_put - 1) % pb->buf_size); - else - return 0; -} - - -/* - * pl2303_buf_put - * - * Copy data data from a user buffer and put it into the circular buffer. - * Restrict to the amount of space available. - * - * Return the number of bytes copied. - */ - -static unsigned int pl2303_buf_put(struct pl2303_buf *pb, const char *buf, - unsigned int count) -{ - - unsigned int len; - - - if (pb == NULL) - return 0; - - len = pl2303_buf_space_avail(pb); - if (count > len) - count = len; - - if (count == 0) - return 0; - - len = pb->buf_buf + pb->buf_size - pb->buf_put; - if (count > len) { - memcpy(pb->buf_put, buf, len); - memcpy(pb->buf_buf, buf+len, count - len); - pb->buf_put = pb->buf_buf + count - len; - } else { - memcpy(pb->buf_put, buf, count); - if (count < len) - pb->buf_put += count; - else /* count == len */ - pb->buf_put = pb->buf_buf; - } - - return count; - -} - - -/* - * pl2303_buf_get - * - * Get data from the circular buffer and copy to the given buffer. - * Restrict to the amount of data available. - * - * Return the number of bytes copied. - */ - -static unsigned int pl2303_buf_get(struct pl2303_buf *pb, char *buf, - unsigned int count) -{ - - unsigned int len; - - - if (pb == NULL) - return 0; - - len = pl2303_buf_data_avail(pb); - if (count > len) - count = len; - - if (count == 0) - return 0; - - len = pb->buf_buf + pb->buf_size - pb->buf_get; - if (count > len) { - memcpy(buf, pb->buf_get, len); - memcpy(buf+len, pb->buf_buf, count - len); - pb->buf_get = pb->buf_buf + count - len; - } else { - memcpy(buf, pb->buf_get, count); - if (count < len) - pb->buf_get += count; - else /* count == len */ - pb->buf_get = pb->buf_buf; - } - - return count; - -} - -static int __init pl2303_init (void) +static int __init pl2303_init(void) { int retval; + retval = usb_serial_register(&pl2303_device); if (retval) goto failed_usb_serial_register; @@ -1187,14 +1156,12 @@ failed_usb_serial_register: return retval; } - -static void __exit pl2303_exit (void) +static void __exit pl2303_exit(void) { - usb_deregister (&pl2303_driver); - usb_serial_deregister (&pl2303_device); + usb_deregister(&pl2303_driver); + usb_serial_deregister(&pl2303_device); } - module_init(pl2303_init); module_exit(pl2303_exit); diff --git a/drivers/usb/serial/pl2303.h b/drivers/usb/serial/pl2303.h index 55195e76eb6..762cc290ef5 100644 --- a/drivers/usb/serial/pl2303.h +++ b/drivers/usb/serial/pl2303.h @@ -89,3 +89,7 @@ /* Belkin "F5U257" Serial Adapter */ #define BELKIN_VENDOR_ID 0x050d #define BELKIN_PRODUCT_ID 0x0257 + +/* Alcor Micro Corp. USB 2.0 TO RS-232 */ +#define ALCOR_VENDOR_ID 0x058F +#define ALCOR_PRODUCT_ID 0x9720 diff --git a/drivers/usb/serial/usb-serial.c b/drivers/usb/serial/usb-serial.c index e06a41bd0f3..0222d92842b 100644 --- a/drivers/usb/serial/usb-serial.c +++ b/drivers/usb/serial/usb-serial.c @@ -676,33 +676,29 @@ int usb_serial_probe(struct usb_interface *interface, iface_desc = interface->cur_altsetting; for (i = 0; i < iface_desc->desc.bNumEndpoints; ++i) { endpoint = &iface_desc->endpoint[i].desc; - - if ((endpoint->bEndpointAddress & 0x80) && - ((endpoint->bmAttributes & 3) == 0x02)) { + + if (usb_endpoint_is_bulk_in(endpoint)) { /* we found a bulk in endpoint */ dbg("found bulk in on endpoint %d", i); bulk_in_endpoint[num_bulk_in] = endpoint; ++num_bulk_in; } - if (((endpoint->bEndpointAddress & 0x80) == 0x00) && - ((endpoint->bmAttributes & 3) == 0x02)) { + if (usb_endpoint_is_bulk_out(endpoint)) { /* we found a bulk out endpoint */ dbg("found bulk out on endpoint %d", i); bulk_out_endpoint[num_bulk_out] = endpoint; ++num_bulk_out; } - - if ((endpoint->bEndpointAddress & 0x80) && - ((endpoint->bmAttributes & 3) == 0x03)) { + + if (usb_endpoint_is_int_in(endpoint)) { /* we found a interrupt in endpoint */ dbg("found interrupt in on endpoint %d", i); interrupt_in_endpoint[num_interrupt_in] = endpoint; ++num_interrupt_in; } - if (((endpoint->bEndpointAddress & 0x80) == 0x00) && - ((endpoint->bmAttributes & 3) == 0x03)) { + if (usb_endpoint_is_int_out(endpoint)) { /* we found an interrupt out endpoint */ dbg("found interrupt out on endpoint %d", i); interrupt_out_endpoint[num_interrupt_out] = endpoint; @@ -716,14 +712,15 @@ int usb_serial_probe(struct usb_interface *interface, if (((le16_to_cpu(dev->descriptor.idVendor) == PL2303_VENDOR_ID) && (le16_to_cpu(dev->descriptor.idProduct) == PL2303_PRODUCT_ID)) || ((le16_to_cpu(dev->descriptor.idVendor) == ATEN_VENDOR_ID) && - (le16_to_cpu(dev->descriptor.idProduct) == ATEN_PRODUCT_ID))) { + (le16_to_cpu(dev->descriptor.idProduct) == ATEN_PRODUCT_ID)) || + ((le16_to_cpu(dev->descriptor.idVendor) == ALCOR_VENDOR_ID) && + (le16_to_cpu(dev->descriptor.idProduct) == ALCOR_PRODUCT_ID))) { if (interface != dev->actconfig->interface[0]) { /* check out the endpoints of the other interface*/ iface_desc = dev->actconfig->interface[0]->cur_altsetting; for (i = 0; i < iface_desc->desc.bNumEndpoints; ++i) { endpoint = &iface_desc->endpoint[i].desc; - if ((endpoint->bEndpointAddress & 0x80) && - ((endpoint->bmAttributes & 3) == 0x03)) { + if (usb_endpoint_is_int_in(endpoint)) { /* we found a interrupt in endpoint */ dbg("found interrupt in for Prolific device on separate interface"); interrupt_in_endpoint[num_interrupt_in] = endpoint; @@ -937,7 +934,10 @@ int usb_serial_probe(struct usb_interface *interface, snprintf (&port->dev.bus_id[0], sizeof(port->dev.bus_id), "ttyUSB%d", port->number); dbg ("%s - registering %s", __FUNCTION__, port->dev.bus_id); - device_register (&port->dev); + retval = device_register(&port->dev); + if (retval) + dev_err(&port->dev, "Error registering port device, " + "continuing\n"); } usb_serial_console_init (debug, minor); diff --git a/drivers/usb/storage/Kconfig b/drivers/usb/storage/Kconfig index be9eec22574..86e48c42d6a 100644 --- a/drivers/usb/storage/Kconfig +++ b/drivers/usb/storage/Kconfig @@ -135,6 +135,18 @@ config USB_STORAGE_ONETOUCH this input in any keybinding software. (e.g. gnome's keyboard short- cuts) +config USB_STORAGE_KARMA + bool "Support for Rio Karma music player" + depends on USB_STORAGE + help + Say Y here to include additional code to support the Rio Karma + USB interface. + + This code places the Rio Karma into mass storage mode, enabling + it to be mounted as an ordinary filesystem. Performing an eject + on the resulting scsi device node returns the Karma to normal + operation. + config USB_LIBUSUAL bool "The shared table of common (or usual) storage devices" depends on USB diff --git a/drivers/usb/storage/Makefile b/drivers/usb/storage/Makefile index 8cbba22508a..023969b4385 100644 --- a/drivers/usb/storage/Makefile +++ b/drivers/usb/storage/Makefile @@ -20,6 +20,7 @@ usb-storage-obj-$(CONFIG_USB_STORAGE_DATAFAB) += datafab.o usb-storage-obj-$(CONFIG_USB_STORAGE_JUMPSHOT) += jumpshot.o usb-storage-obj-$(CONFIG_USB_STORAGE_ALAUDA) += alauda.o usb-storage-obj-$(CONFIG_USB_STORAGE_ONETOUCH) += onetouch.o +usb-storage-obj-$(CONFIG_USB_STORAGE_KARMA) += karma.o usb-storage-objs := scsiglue.o protocol.o transport.o usb.o \ initializers.o $(usb-storage-obj-y) diff --git a/drivers/usb/storage/initializers.c b/drivers/usb/storage/initializers.c index ab173b30076..5b06f9240d0 100644 --- a/drivers/usb/storage/initializers.c +++ b/drivers/usb/storage/initializers.c @@ -45,12 +45,6 @@ #include "debug.h" #include "transport.h" -#define RIO_MSC 0x08 -#define RIOP_INIT "RIOP\x00\x01\x08" -#define RIOP_INIT_LEN 7 -#define RIO_SEND_LEN 40 -#define RIO_RECV_LEN 0x200 - /* This places the Shuttle/SCM USB<->SCSI bridge devices in multi-target * mode */ int usb_stor_euscsi_init(struct us_data *us) @@ -97,70 +91,3 @@ int usb_stor_ucr61s2b_init(struct us_data *us) return (res ? -1 : 0); } - -/* Place the Rio Karma into mass storage mode. - * - * The initialization begins by sending 40 bytes starting - * RIOP\x00\x01\x08\x00, which the device will ack with a 512-byte - * packet with the high four bits set and everything else null. - * - * Next, we send RIOP\x80\x00\x08\x00. Each time, a 512 byte response - * must be read, but we must loop until byte 5 in the response is 0x08, - * indicating success. */ -int rio_karma_init(struct us_data *us) -{ - int result, partial; - char *recv; - unsigned long timeout; - - // us->iobuf is big enough to hold cmd but not receive - if (!(recv = kmalloc(RIO_RECV_LEN, GFP_KERNEL))) - goto die_nomem; - - US_DEBUGP("Initializing Karma...\n"); - - memset(us->iobuf, 0, RIO_SEND_LEN); - memcpy(us->iobuf, RIOP_INIT, RIOP_INIT_LEN); - - result = usb_stor_bulk_transfer_buf(us, us->send_bulk_pipe, - us->iobuf, RIO_SEND_LEN, &partial); - if (result != USB_STOR_XFER_GOOD) - goto die; - - result = usb_stor_bulk_transfer_buf(us, us->recv_bulk_pipe, - recv, RIO_RECV_LEN, &partial); - if (result != USB_STOR_XFER_GOOD) - goto die; - - us->iobuf[4] = 0x80; - us->iobuf[5] = 0; - timeout = jiffies + msecs_to_jiffies(3000); - for (;;) { - US_DEBUGP("Sending init command\n"); - result = usb_stor_bulk_transfer_buf(us, us->send_bulk_pipe, - us->iobuf, RIO_SEND_LEN, &partial); - if (result != USB_STOR_XFER_GOOD) - goto die; - - result = usb_stor_bulk_transfer_buf(us, us->recv_bulk_pipe, - recv, RIO_RECV_LEN, &partial); - if (result != USB_STOR_XFER_GOOD) - goto die; - - if (recv[5] == RIO_MSC) - break; - if (time_after(jiffies, timeout)) - goto die; - msleep(10); - } - US_DEBUGP("Karma initialized.\n"); - kfree(recv); - return 0; - -die: - kfree(recv); -die_nomem: - US_DEBUGP("Could not initialize karma.\n"); - return USB_STOR_TRANSPORT_FAILED; -} - diff --git a/drivers/usb/storage/initializers.h b/drivers/usb/storage/initializers.h index 927f7781080..e2967a4d48a 100644 --- a/drivers/usb/storage/initializers.h +++ b/drivers/usb/storage/initializers.h @@ -47,4 +47,3 @@ int usb_stor_euscsi_init(struct us_data *us); /* This function is required to activate all four slots on the UCR-61S2B * flash reader */ int usb_stor_ucr61s2b_init(struct us_data *us); -int rio_karma_init(struct us_data *us); diff --git a/drivers/usb/storage/karma.c b/drivers/usb/storage/karma.c new file mode 100644 index 00000000000..0d79ae5683f --- /dev/null +++ b/drivers/usb/storage/karma.c @@ -0,0 +1,155 @@ +/* Driver for Rio Karma + * + * (c) 2006 Bob Copeland <me@bobcopeland.com> + * (c) 2006 Keith Bennett <keith@mcs.st-and.ac.uk> + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2, or (at your option) any + * later version. + * + * This program is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + * General Public License for more details. + * + * You should have received a copy of the GNU General Public License along + * with this program; if not, write to the Free Software Foundation, Inc., + * 675 Mass Ave, Cambridge, MA 02139, USA. + */ + +#include <scsi/scsi.h> +#include <scsi/scsi_cmnd.h> +#include <scsi/scsi_device.h> + +#include "usb.h" +#include "transport.h" +#include "debug.h" +#include "karma.h" + +#define RIO_PREFIX "RIOP\x00" +#define RIO_PREFIX_LEN 5 +#define RIO_SEND_LEN 40 +#define RIO_RECV_LEN 0x200 + +#define RIO_ENTER_STORAGE 0x1 +#define RIO_LEAVE_STORAGE 0x2 +#define RIO_RESET 0xC + +extern int usb_stor_Bulk_transport(struct scsi_cmnd *, struct us_data *); + +struct karma_data { + int in_storage; + char *recv; +}; + +/* + * Send commands to Rio Karma. + * + * For each command we send 40 bytes starting 'RIOP\0' followed by + * the command number and a sequence number, which the device will ack + * with a 512-byte packet with the high four bits set and everything + * else null. Then we send 'RIOP\x80' followed by a zero and the + * sequence number, until byte 5 in the response repeats the sequence + * number. + */ +static int rio_karma_send_command(char cmd, struct us_data *us) +{ + int result, partial; + unsigned long timeout; + static unsigned char seq = 1; + struct karma_data *data = (struct karma_data *) us->extra; + + US_DEBUGP("karma: sending command %04x\n", cmd); + memset(us->iobuf, 0, RIO_SEND_LEN); + memcpy(us->iobuf, RIO_PREFIX, RIO_PREFIX_LEN); + us->iobuf[5] = cmd; + us->iobuf[6] = seq; + + timeout = jiffies + msecs_to_jiffies(6000); + for (;;) { + result = usb_stor_bulk_transfer_buf(us, us->send_bulk_pipe, + us->iobuf, RIO_SEND_LEN, &partial); + if (result != USB_STOR_XFER_GOOD) + goto err; + + result = usb_stor_bulk_transfer_buf(us, us->recv_bulk_pipe, + data->recv, RIO_RECV_LEN, &partial); + if (result != USB_STOR_XFER_GOOD) + goto err; + + if (data->recv[5] == seq) + break; + + if (time_after(jiffies, timeout)) + goto err; + + us->iobuf[4] = 0x80; + us->iobuf[5] = 0; + msleep(50); + } + + seq++; + if (seq == 0) + seq = 1; + + US_DEBUGP("karma: sent command %04x\n", cmd); + return 0; +err: + US_DEBUGP("karma: command %04x failed\n", cmd); + return USB_STOR_TRANSPORT_FAILED; +} + +/* + * Trap START_STOP and READ_10 to leave/re-enter storage mode. + * Everything else is propagated to the normal bulk layer. + */ +int rio_karma_transport(struct scsi_cmnd *srb, struct us_data *us) +{ + int ret; + struct karma_data *data = (struct karma_data *) us->extra; + + if (srb->cmnd[0] == READ_10 && !data->in_storage) { + ret = rio_karma_send_command(RIO_ENTER_STORAGE, us); + if (ret) + return ret; + + data->in_storage = 1; + return usb_stor_Bulk_transport(srb, us); + } else if (srb->cmnd[0] == START_STOP) { + ret = rio_karma_send_command(RIO_LEAVE_STORAGE, us); + if (ret) + return ret; + + data->in_storage = 0; + return rio_karma_send_command(RIO_RESET, us); + } + return usb_stor_Bulk_transport(srb, us); +} + +static void rio_karma_destructor(void *extra) +{ + struct karma_data *data = (struct karma_data *) extra; + kfree(data->recv); +} + +int rio_karma_init(struct us_data *us) +{ + int ret = 0; + struct karma_data *data = kzalloc(sizeof(struct karma_data), GFP_NOIO); + if (!data) + goto out; + + data->recv = kmalloc(RIO_RECV_LEN, GFP_NOIO); + if (!data->recv) { + kfree(data); + goto out; + } + + us->extra = data; + us->extra_destructor = rio_karma_destructor; + ret = rio_karma_send_command(RIO_ENTER_STORAGE, us); + data->in_storage = (ret == 0); +out: + return ret; +} diff --git a/drivers/usb/storage/karma.h b/drivers/usb/storage/karma.h new file mode 100644 index 00000000000..8a60972af8c --- /dev/null +++ b/drivers/usb/storage/karma.h @@ -0,0 +1,7 @@ +#ifndef _KARMA_USB_H +#define _KARMA_USB_H + +extern int rio_karma_init(struct us_data *us); +extern int rio_karma_transport(struct scsi_cmnd *srb, struct us_data *us); + +#endif diff --git a/drivers/usb/storage/libusual.c b/drivers/usb/storage/libusual.c index b1ec4a71854..599ad10a761 100644 --- a/drivers/usb/storage/libusual.c +++ b/drivers/usb/storage/libusual.c @@ -8,6 +8,7 @@ #include <linux/usb.h> #include <linux/usb_usual.h> #include <linux/vmalloc.h> +#include <linux/kthread.h> /* */ @@ -117,7 +118,7 @@ static int usu_probe(struct usb_interface *intf, const struct usb_device_id *id) { unsigned long type; - int rc; + struct task_struct* task; unsigned long flags; type = USB_US_TYPE(id->driver_info); @@ -132,8 +133,9 @@ static int usu_probe(struct usb_interface *intf, stat[type].fls |= USU_MOD_FL_THREAD; spin_unlock_irqrestore(&usu_lock, flags); - rc = kernel_thread(usu_probe_thread, (void*)type, CLONE_VM); - if (rc < 0) { + task = kthread_run(usu_probe_thread, (void*)type, "libusual_%d", type); + if (IS_ERR(task)) { + int rc = PTR_ERR(task); printk(KERN_WARNING "libusual: " "Unable to start the thread for %s: %d\n", bias_names[type], rc); @@ -175,8 +177,6 @@ static int usu_probe_thread(void *arg) int rc; unsigned long flags; - daemonize("libusual_%d", type); /* "usb-storage" is kinda too long */ - /* A completion does not work here because it's counted. */ down(&usu_init_notify); up(&usu_init_notify); diff --git a/drivers/usb/storage/onetouch.c b/drivers/usb/storage/onetouch.c index 313920d980c..f843a0bcf10 100644 --- a/drivers/usb/storage/onetouch.c +++ b/drivers/usb/storage/onetouch.c @@ -135,6 +135,7 @@ int onetouch_connect_input(struct us_data *ss) struct usb_onetouch *onetouch; struct input_dev *input_dev; int pipe, maxp; + int error = -ENOMEM; interface = ss->pusb_intf->cur_altsetting; @@ -211,15 +212,18 @@ int onetouch_connect_input(struct us_data *ss) ss->suspend_resume_hook = usb_onetouch_pm_hook; #endif - input_register_device(onetouch->dev); + error = input_register_device(onetouch->dev); + if (error) + goto fail3; return 0; + fail3: usb_free_urb(onetouch->irq); fail2: usb_buffer_free(udev, ONETOUCH_PKT_LEN, onetouch->data, onetouch->data_dma); fail1: kfree(onetouch); input_free_device(input_dev); - return -ENOMEM; + return error; } void onetouch_release_input(void *onetouch_) diff --git a/drivers/usb/storage/scsiglue.c b/drivers/usb/storage/scsiglue.c index a4b7df9ff8c..e1072d52d64 100644 --- a/drivers/usb/storage/scsiglue.c +++ b/drivers/usb/storage/scsiglue.c @@ -72,12 +72,27 @@ static const char* host_info(struct Scsi_Host *host) static int slave_alloc (struct scsi_device *sdev) { + struct us_data *us = host_to_us(sdev->host); + /* * Set the INQUIRY transfer length to 36. We don't use any of * the extra data and many devices choke if asked for more or * less than 36 bytes. */ sdev->inquiry_len = 36; + + /* + * The UFI spec treates the Peripheral Qualifier bits in an + * INQUIRY result as reserved and requires devices to set them + * to 0. However the SCSI spec requires these bits to be set + * to 3 to indicate when a LUN is not present. + * + * Let the scanning code know if this target merely sets + * Peripheral Device Type to 0x1f to indicate no LUN. + */ + if (us->subclass == US_SC_UFI) + sdev->sdev_target->pdt_1f_for_no_lun = 1; + return 0; } diff --git a/drivers/usb/storage/transport.c b/drivers/usb/storage/transport.c index d6acc92a4ae..f23514c4e64 100644 --- a/drivers/usb/storage/transport.c +++ b/drivers/usb/storage/transport.c @@ -294,11 +294,6 @@ static int interpret_urb_result(struct us_data *us, unsigned int pipe, return USB_STOR_XFER_ERROR; return USB_STOR_XFER_STALLED; - /* timeout or excessively long NAK */ - case -ETIMEDOUT: - US_DEBUGP("-- timeout or NAK\n"); - return USB_STOR_XFER_ERROR; - /* babble - the device tried to send more than we wanted to read */ case -EOVERFLOW: US_DEBUGP("-- babble\n"); diff --git a/drivers/usb/storage/unusual_devs.h b/drivers/usb/storage/unusual_devs.h index b130e170b4a..40bf159f7d5 100644 --- a/drivers/usb/storage/unusual_devs.h +++ b/drivers/usb/storage/unusual_devs.h @@ -218,10 +218,12 @@ UNUSUAL_DEV( 0x0457, 0x0151, 0x0100, 0x0100, US_SC_DEVICE, US_PR_DEVICE, NULL, US_FL_NOT_LOCKABLE ), +#ifdef CONFIG_USB_STORAGE_KARMA UNUSUAL_DEV( 0x045a, 0x5210, 0x0101, 0x0101, "Rio", "Rio Karma", - US_SC_SCSI, US_PR_BULK, rio_karma_init, 0), + US_SC_SCSI, US_PR_KARMA, rio_karma_init, 0), +#endif /* Patch submitted by Philipp Friedrich <philipp@void.at> */ UNUSUAL_DEV( 0x0482, 0x0100, 0x0100, 0x0100, @@ -631,6 +633,13 @@ UNUSUAL_DEV( 0x0595, 0x4343, 0x0000, 0x2210, "Digital Camera EX-20 DSC", US_SC_8070, US_PR_DEVICE, NULL, 0 ), +/* Reported by <Hendryk.Pfeiffer@gmx.de> */ +UNUSUAL_DEV( 0x059f, 0x0643, 0x0000, 0x0000, + "LaCie", + "DVD+-RW", + US_SC_DEVICE, US_PR_DEVICE, NULL, + US_FL_GO_SLOW ), + /* Submitted by Joel Bourquard <numlock@freesurf.ch> * Some versions of this device need the SubClass and Protocol overrides * while others don't. @@ -1254,6 +1263,13 @@ UNUSUAL_DEV( 0x0fce, 0xd008, 0x0000, 0x0000, US_SC_DEVICE, US_PR_DEVICE, NULL, US_FL_NO_WP_DETECT ), +/* Reported by Jan Mate <mate@fiit.stuba.sk> */ +UNUSUAL_DEV( 0x0fce, 0xe030, 0x0000, 0x0000, + "Sony Ericsson", + "P990i", + US_SC_DEVICE, US_PR_DEVICE, NULL, + US_FL_FIX_CAPACITY ), + /* Reported by Emmanuel Vasilakis <evas@forthnet.gr> */ UNUSUAL_DEV( 0x0fce, 0xe031, 0x0000, 0x0000, "Sony Ericsson", diff --git a/drivers/usb/storage/usb.c b/drivers/usb/storage/usb.c index 8d7bdcb5924..b8d6031b097 100644 --- a/drivers/usb/storage/usb.c +++ b/drivers/usb/storage/usb.c @@ -98,6 +98,9 @@ #ifdef CONFIG_USB_STORAGE_ALAUDA #include "alauda.h" #endif +#ifdef CONFIG_USB_STORAGE_KARMA +#include "karma.h" +#endif /* Some informational data */ MODULE_AUTHOR("Matthew Dharm <mdharm-usb@one-eyed-alien.net>"); @@ -646,6 +649,14 @@ static int get_transport(struct us_data *us) break; #endif +#ifdef CONFIG_USB_STORAGE_KARMA + case US_PR_KARMA: + us->transport_name = "Rio Karma/Bulk"; + us->transport = rio_karma_transport; + us->transport_reset = usb_stor_Bulk_reset; + break; +#endif + default: return -EIO; } diff --git a/drivers/usb/usb-skeleton.c b/drivers/usb/usb-skeleton.c index b362039792b..1b51d3187a9 100644 --- a/drivers/usb/usb-skeleton.c +++ b/drivers/usb/usb-skeleton.c @@ -1,5 +1,5 @@ /* - * USB Skeleton driver - 2.0 + * USB Skeleton driver - 2.2 * * Copyright (C) 2001-2004 Greg Kroah-Hartman (greg@kroah.com) * @@ -7,9 +7,8 @@ * modify it under the terms of the GNU General Public License as * published by the Free Software Foundation, version 2. * - * This driver is based on the 2.6.3 version of drivers/usb/usb-skeleton.c - * but has been rewritten to be easy to read and use, as no locks are now - * needed anymore. + * This driver is based on the 2.6.3 version of drivers/usb/usb-skeleton.c + * but has been rewritten to be easier to read and use. * */ @@ -21,6 +20,7 @@ #include <linux/kref.h> #include <asm/uaccess.h> #include <linux/usb.h> +#include <linux/mutex.h> /* Define these values to match your devices */ @@ -32,38 +32,39 @@ static struct usb_device_id skel_table [] = { { USB_DEVICE(USB_SKEL_VENDOR_ID, USB_SKEL_PRODUCT_ID) }, { } /* Terminating entry */ }; -MODULE_DEVICE_TABLE (usb, skel_table); +MODULE_DEVICE_TABLE(usb, skel_table); /* Get a minor range for your devices from the usb maintainer */ #define USB_SKEL_MINOR_BASE 192 /* our private defines. if this grows any larger, use your own .h file */ -#define MAX_TRANSFER ( PAGE_SIZE - 512 ) +#define MAX_TRANSFER (PAGE_SIZE - 512) #define WRITES_IN_FLIGHT 8 /* Structure to hold all of our device specific stuff */ struct usb_skel { - struct usb_device * udev; /* the usb device for this device */ - struct usb_interface * interface; /* the interface for this device */ + struct usb_device *dev; /* the usb device for this device */ + struct usb_interface *interface; /* the interface for this device */ struct semaphore limit_sem; /* limiting the number of writes in progress */ - unsigned char * bulk_in_buffer; /* the buffer to receive data */ + unsigned char *bulk_in_buffer; /* the buffer to receive data */ size_t bulk_in_size; /* the size of the receive buffer */ __u8 bulk_in_endpointAddr; /* the address of the bulk in endpoint */ __u8 bulk_out_endpointAddr; /* the address of the bulk out endpoint */ struct kref kref; + struct mutex io_mutex; /* synchronize I/O with disconnect */ }; #define to_skel_dev(d) container_of(d, struct usb_skel, kref) static struct usb_driver skel_driver; static void skel_delete(struct kref *kref) -{ +{ struct usb_skel *dev = to_skel_dev(kref); usb_put_dev(dev->udev); - kfree (dev->bulk_in_buffer); - kfree (dev); + kfree(dev->bulk_in_buffer); + kfree(dev); } static int skel_open(struct inode *inode, struct file *file) @@ -89,6 +90,11 @@ static int skel_open(struct inode *inode, struct file *file) goto exit; } + /* prevent the device from being autosuspended */ + retval = usb_autopm_get_interface(interface); + if (retval) + goto exit; + /* increment our usage count for the device */ kref_get(&dev->kref); @@ -107,6 +113,12 @@ static int skel_release(struct inode *inode, struct file *file) if (dev == NULL) return -ENODEV; + /* allow the device to be autosuspended */ + mutex_lock(&dev->io_mutex); + if (dev->interface) + usb_autopm_put_interface(dev->interface); + mutex_unlock(&dev->io_mutex); + /* decrement the count on our device */ kref_put(&dev->kref, skel_delete); return 0; @@ -115,11 +127,17 @@ static int skel_release(struct inode *inode, struct file *file) static ssize_t skel_read(struct file *file, char *buffer, size_t count, loff_t *ppos) { struct usb_skel *dev; - int retval = 0; + int retval; int bytes_read; dev = (struct usb_skel *)file->private_data; - + + mutex_lock(&dev->io_mutex); + if (!dev->interface) { /* disconnect() was called */ + retval = -ENODEV; + goto exit; + } + /* do a blocking bulk read to get data from the device */ retval = usb_bulk_msg(dev->udev, usb_rcvbulkpipe(dev->udev, dev->bulk_in_endpointAddr), @@ -135,6 +153,8 @@ static ssize_t skel_read(struct file *file, char *buffer, size_t count, loff_t * retval = bytes_read; } +exit: + mutex_unlock(&dev->io_mutex); return retval; } @@ -145,16 +165,16 @@ static void skel_write_bulk_callback(struct urb *urb, struct pt_regs *regs) dev = (struct usb_skel *)urb->context; /* sync/async unlink faults aren't errors */ - if (urb->status && - !(urb->status == -ENOENT || + if (urb->status && + !(urb->status == -ENOENT || urb->status == -ECONNRESET || urb->status == -ESHUTDOWN)) { - dbg("%s - nonzero write bulk status received: %d", + err("%s - nonzero write bulk status received: %d", __FUNCTION__, urb->status); } /* free up our allocated buffer */ - usb_buffer_free(urb->dev, urb->transfer_buffer_length, + usb_buffer_free(urb->dev, urb->transfer_buffer_length, urb->transfer_buffer, urb->transfer_dma); up(&dev->limit_sem); } @@ -179,6 +199,12 @@ static ssize_t skel_write(struct file *file, const char *user_buffer, size_t cou goto exit; } + mutex_lock(&dev->io_mutex); + if (!dev->interface) { /* disconnect() was called */ + retval = -ENODEV; + goto error; + } + /* create a urb, and a buffer for it, and copy the data to the urb */ urb = usb_alloc_urb(0, GFP_KERNEL); if (!urb) { @@ -213,17 +239,22 @@ static ssize_t skel_write(struct file *file, const char *user_buffer, size_t cou /* release our reference to this urb, the USB core will eventually free it entirely */ usb_free_urb(urb); -exit: + mutex_unlock(&dev->io_mutex); return writesize; error: - usb_buffer_free(dev->udev, writesize, buf, urb->transfer_dma); - usb_free_urb(urb); + if (urb) { + usb_buffer_free(dev->udev, writesize, buf, urb->transfer_dma); + usb_free_urb(urb); + } + mutex_unlock(&dev->io_mutex); up(&dev->limit_sem); + +exit: return retval; } -static struct file_operations skel_fops = { +static const struct file_operations skel_fops = { .owner = THIS_MODULE, .read = skel_read, .write = skel_write, @@ -231,7 +262,7 @@ static struct file_operations skel_fops = { .release = skel_release, }; -/* +/* * usb class driver info in order to get a minor number from the usb core, * and to have the device registered with the driver core */ @@ -243,7 +274,7 @@ static struct usb_class_driver skel_class = { static int skel_probe(struct usb_interface *interface, const struct usb_device_id *id) { - struct usb_skel *dev = NULL; + struct usb_skel *dev; struct usb_host_interface *iface_desc; struct usb_endpoint_descriptor *endpoint; size_t buffer_size; @@ -252,12 +283,13 @@ static int skel_probe(struct usb_interface *interface, const struct usb_device_i /* allocate memory for our device state and initialize it */ dev = kzalloc(sizeof(*dev), GFP_KERNEL); - if (dev == NULL) { + if (!dev) { err("Out of memory"); goto error; } kref_init(&dev->kref); sema_init(&dev->limit_sem, WRITES_IN_FLIGHT); + mutex_init(&dev->io_mutex); dev->udev = usb_get_dev(interface_to_usbdev(interface)); dev->interface = interface; @@ -269,10 +301,7 @@ static int skel_probe(struct usb_interface *interface, const struct usb_device_i endpoint = &iface_desc->endpoint[i].desc; if (!dev->bulk_in_endpointAddr && - ((endpoint->bEndpointAddress & USB_ENDPOINT_DIR_MASK) - == USB_DIR_IN) && - ((endpoint->bmAttributes & USB_ENDPOINT_XFERTYPE_MASK) - == USB_ENDPOINT_XFER_BULK)) { + usb_endpoint_is_bulk_in(endpoint)) { /* we found a bulk in endpoint */ buffer_size = le16_to_cpu(endpoint->wMaxPacketSize); dev->bulk_in_size = buffer_size; @@ -285,10 +314,7 @@ static int skel_probe(struct usb_interface *interface, const struct usb_device_i } if (!dev->bulk_out_endpointAddr && - ((endpoint->bEndpointAddress & USB_ENDPOINT_DIR_MASK) - == USB_DIR_OUT) && - ((endpoint->bmAttributes & USB_ENDPOINT_XFERTYPE_MASK) - == USB_ENDPOINT_XFER_BULK)) { + usb_endpoint_is_bulk_out(endpoint)) { /* we found a bulk out endpoint */ dev->bulk_out_endpointAddr = endpoint->bEndpointAddress; } @@ -334,6 +360,11 @@ static void skel_disconnect(struct usb_interface *interface) /* give back our minor */ usb_deregister_dev(interface, &skel_class); + /* prevent more I/O from starting */ + mutex_lock(&dev->io_mutex); + dev->interface = NULL; + mutex_unlock(&dev->io_mutex); + unlock_kernel(); /* decrement our usage count */ @@ -367,7 +398,7 @@ static void __exit usb_skel_exit(void) usb_deregister(&skel_driver); } -module_init (usb_skel_init); -module_exit (usb_skel_exit); +module_init(usb_skel_init); +module_exit(usb_skel_exit); MODULE_LICENSE("GPL"); |