4 files changed, 85 insertions, 6 deletions

diff --git a/drivers/usb/storage/initializers.c b/drivers/usb/storage/initializers.c
index 5b06f9240d0..ab173b30076 100644
--- a/drivers/usb/storage/initializers.c
+++ b/drivers/usb/storage/initializers.c
@@ -45,6 +45,12 @@
 #include "debug.h"
 #include "transport.h"
 
+#define RIO_MSC 0x08
+#define RIOP_INIT "RIOP\x00\x01\x08"
+#define RIOP_INIT_LEN 7
+#define RIO_SEND_LEN 40
+#define RIO_RECV_LEN 0x200
+
 /* This places the Shuttle/SCM USB<->SCSI bridge devices in multi-target
  * mode */
 int usb_stor_euscsi_init(struct us_data *us)
@@ -91,3 +97,70 @@ int usb_stor_ucr61s2b_init(struct us_data *us)
 
 	return (res ? -1 : 0);
 }
+
+/* Place the Rio Karma into mass storage mode.
+ *
+ * The initialization begins by sending 40 bytes starting
+ * RIOP\x00\x01\x08\x00, which the device will ack with a 512-byte
+ * packet with the high four bits set and everything else null.
+ *
+ * Next, we send RIOP\x80\x00\x08\x00.  Each time, a 512 byte response
+ * must be read, but we must loop until byte 5 in the response is 0x08,
+ * indicating success.  */
+int rio_karma_init(struct us_data *us)
+{
+	int result, partial;
+	char *recv;
+	unsigned long timeout;
+
+	// us->iobuf is big enough to hold cmd but not receive
+	if (!(recv = kmalloc(RIO_RECV_LEN, GFP_KERNEL)))
+		goto die_nomem;
+
+	US_DEBUGP("Initializing Karma...\n");
+
+	memset(us->iobuf, 0, RIO_SEND_LEN);
+	memcpy(us->iobuf, RIOP_INIT, RIOP_INIT_LEN);
+
+	result = usb_stor_bulk_transfer_buf(us, us->send_bulk_pipe,
+		us->iobuf, RIO_SEND_LEN, &partial);
+	if (result != USB_STOR_XFER_GOOD)
+		goto die;
+
+	result = usb_stor_bulk_transfer_buf(us, us->recv_bulk_pipe,
+		recv, RIO_RECV_LEN, &partial);
+	if (result != USB_STOR_XFER_GOOD)
+		goto die;
+
+	us->iobuf[4] = 0x80;
+	us->iobuf[5] = 0;
+	timeout = jiffies + msecs_to_jiffies(3000);
+	for (;;) {
+		US_DEBUGP("Sending init command\n");
+		result = usb_stor_bulk_transfer_buf(us, us->send_bulk_pipe,
+			us->iobuf, RIO_SEND_LEN, &partial);
+		if (result != USB_STOR_XFER_GOOD)
+			goto die;
+
+		result = usb_stor_bulk_transfer_buf(us, us->recv_bulk_pipe,
+			recv, RIO_RECV_LEN, &partial);
+		if (result != USB_STOR_XFER_GOOD)
+			goto die;
+
+		if (recv[5] == RIO_MSC)
+			break;
+		if (time_after(jiffies, timeout))
+			goto die;
+		msleep(10);
+	}
+	US_DEBUGP("Karma initialized.\n");
+	kfree(recv);
+	return 0;
+
+die:
+	kfree(recv);
+die_nomem:
+	US_DEBUGP("Could not initialize karma.\n");
+	return USB_STOR_TRANSPORT_FAILED;
+}
+
diff --git a/drivers/usb/storage/initializers.h b/drivers/usb/storage/initializers.h
index 4c1b2bd2e2e..f9907a5cf12 100644
--- a/drivers/usb/storage/initializers.h
+++ b/drivers/usb/storage/initializers.h
@@ -48,3 +48,4 @@ int usb_stor_euscsi_init(struct us_data *us);
 /* This function is required to activate all four slots on the UCR-61S2B
  * flash reader */
 int usb_stor_ucr61s2b_init(struct us_data *us);
+int rio_karma_init(struct us_data *us);
diff --git a/drivers/usb/storage/libusual.c b/drivers/usb/storage/libusual.c
index b28151d1b60..b1ec4a71854 100644
--- a/drivers/usb/storage/libusual.c
+++ b/drivers/usb/storage/libusual.c
@@ -116,7 +116,7 @@ EXPORT_SYMBOL_GPL(usb_usual_check_type);
 static int usu_probe(struct usb_interface *intf,
 			 const struct usb_device_id *id)
 {
-	int type;
+	unsigned long type;
 	int rc;
 	unsigned long flags;
 
diff --git a/drivers/usb/storage/unusual_devs.h b/drivers/usb/storage/unusual_devs.h
index dc301e567cf..ee958f986eb 100644
--- a/drivers/usb/storage/unusual_devs.h
+++ b/drivers/usb/storage/unusual_devs.h
@@ -145,6 +145,11 @@ UNUSUAL_DEV(  0x0451, 0x5416, 0x0100, 0x0100,
 		US_SC_DEVICE, US_PR_BULK, NULL,
 		US_FL_NEED_OVERRIDE ),
 
+UNUSUAL_DEV(  0x045a, 0x5210, 0x0101, 0x0101,
+		"Rio",
+		"Rio Karma",
+		US_SC_SCSI, US_PR_BULK, rio_karma_init, 0),
+
 /* Patch submitted by Philipp Friedrich <philipp@void.at> */
 UNUSUAL_DEV(  0x0482, 0x0100, 0x0100, 0x0100,
 		"Kyocera",
@@ -424,11 +429,11 @@ UNUSUAL_DEV(  0x054c, 0x0010, 0x0106, 0x0450,
 		US_FL_SINGLE_LUN | US_FL_NOT_LOCKABLE | US_FL_NO_WP_DETECT ),
 
 /* This entry is needed because the device reports Sub=ff */
-UNUSUAL_DEV(  0x054c, 0x0010, 0x0500, 0x0500, 
-               "Sony",
-               "DSC-T1", 
-               US_SC_8070, US_PR_DEVICE, NULL,
-               US_FL_SINGLE_LUN ),
+UNUSUAL_DEV(  0x054c, 0x0010, 0x0500, 0x0600,
+		"Sony",
+		"DSC-T1/T5",
+		US_SC_8070, US_PR_DEVICE, NULL,
+		US_FL_SINGLE_LUN ),
 
 
 /* Reported by wim@geeks.nl */