summaryrefslogtreecommitdiffstats
path: root/drivers/usb/host/xhci.h
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/usb/host/xhci.h')
-rw-r--r--drivers/usb/host/xhci.h1157
1 files changed, 1157 insertions, 0 deletions
diff --git a/drivers/usb/host/xhci.h b/drivers/usb/host/xhci.h
new file mode 100644
index 00000000000..8936eeb5588
--- /dev/null
+++ b/drivers/usb/host/xhci.h
@@ -0,0 +1,1157 @@
+/*
+ * xHCI host controller driver
+ *
+ * Copyright (C) 2008 Intel Corp.
+ *
+ * Author: Sarah Sharp
+ * Some code borrowed from the Linux EHCI driver.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY
+ * or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License
+ * for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software Foundation,
+ * Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+#ifndef __LINUX_XHCI_HCD_H
+#define __LINUX_XHCI_HCD_H
+
+#include <linux/usb.h>
+#include <linux/timer.h>
+
+#include "../core/hcd.h"
+/* Code sharing between pci-quirks and xhci hcd */
+#include "xhci-ext-caps.h"
+
+/* xHCI PCI Configuration Registers */
+#define XHCI_SBRN_OFFSET (0x60)
+
+/* Max number of USB devices for any host controller - limit in section 6.1 */
+#define MAX_HC_SLOTS 256
+/* Section 5.3.3 - MaxPorts */
+#define MAX_HC_PORTS 127
+
+/*
+ * xHCI register interface.
+ * This corresponds to the eXtensible Host Controller Interface (xHCI)
+ * Revision 0.95 specification
+ *
+ * Registers should always be accessed with double word or quad word accesses.
+ *
+ * Some xHCI implementations may support 64-bit address pointers. Registers
+ * with 64-bit address pointers should be written to with dword accesses by
+ * writing the low dword first (ptr[0]), then the high dword (ptr[1]) second.
+ * xHCI implementations that do not support 64-bit address pointers will ignore
+ * the high dword, and write order is irrelevant.
+ */
+
+/**
+ * struct xhci_cap_regs - xHCI Host Controller Capability Registers.
+ * @hc_capbase: length of the capabilities register and HC version number
+ * @hcs_params1: HCSPARAMS1 - Structural Parameters 1
+ * @hcs_params2: HCSPARAMS2 - Structural Parameters 2
+ * @hcs_params3: HCSPARAMS3 - Structural Parameters 3
+ * @hcc_params: HCCPARAMS - Capability Parameters
+ * @db_off: DBOFF - Doorbell array offset
+ * @run_regs_off: RTSOFF - Runtime register space offset
+ */
+struct xhci_cap_regs {
+ u32 hc_capbase;
+ u32 hcs_params1;
+ u32 hcs_params2;
+ u32 hcs_params3;
+ u32 hcc_params;
+ u32 db_off;
+ u32 run_regs_off;
+ /* Reserved up to (CAPLENGTH - 0x1C) */
+};
+
+/* hc_capbase bitmasks */
+/* bits 7:0 - how long is the Capabilities register */
+#define HC_LENGTH(p) XHCI_HC_LENGTH(p)
+/* bits 31:16 */
+#define HC_VERSION(p) (((p) >> 16) & 0xffff)
+
+/* HCSPARAMS1 - hcs_params1 - bitmasks */
+/* bits 0:7, Max Device Slots */
+#define HCS_MAX_SLOTS(p) (((p) >> 0) & 0xff)
+#define HCS_SLOTS_MASK 0xff
+/* bits 8:18, Max Interrupters */
+#define HCS_MAX_INTRS(p) (((p) >> 8) & 0x7ff)
+/* bits 24:31, Max Ports - max value is 0x7F = 127 ports */
+#define HCS_MAX_PORTS(p) (((p) >> 24) & 0x7f)
+
+/* HCSPARAMS2 - hcs_params2 - bitmasks */
+/* bits 0:3, frames or uframes that SW needs to queue transactions
+ * ahead of the HW to meet periodic deadlines */
+#define HCS_IST(p) (((p) >> 0) & 0xf)
+/* bits 4:7, max number of Event Ring segments */
+#define HCS_ERST_MAX(p) (((p) >> 4) & 0xf)
+/* bit 26 Scratchpad restore - for save/restore HW state - not used yet */
+/* bits 27:31 number of Scratchpad buffers SW must allocate for the HW */
+
+/* HCSPARAMS3 - hcs_params3 - bitmasks */
+/* bits 0:7, Max U1 to U0 latency for the roothub ports */
+#define HCS_U1_LATENCY(p) (((p) >> 0) & 0xff)
+/* bits 16:31, Max U2 to U0 latency for the roothub ports */
+#define HCS_U2_LATENCY(p) (((p) >> 16) & 0xffff)
+
+/* HCCPARAMS - hcc_params - bitmasks */
+/* true: HC can use 64-bit address pointers */
+#define HCC_64BIT_ADDR(p) ((p) & (1 << 0))
+/* true: HC can do bandwidth negotiation */
+#define HCC_BANDWIDTH_NEG(p) ((p) & (1 << 1))
+/* true: HC uses 64-byte Device Context structures
+ * FIXME 64-byte context structures aren't supported yet.
+ */
+#define HCC_64BYTE_CONTEXT(p) ((p) & (1 << 2))
+/* true: HC has port power switches */
+#define HCC_PPC(p) ((p) & (1 << 3))
+/* true: HC has port indicators */
+#define HCS_INDICATOR(p) ((p) & (1 << 4))
+/* true: HC has Light HC Reset Capability */
+#define HCC_LIGHT_RESET(p) ((p) & (1 << 5))
+/* true: HC supports latency tolerance messaging */
+#define HCC_LTC(p) ((p) & (1 << 6))
+/* true: no secondary Stream ID Support */
+#define HCC_NSS(p) ((p) & (1 << 7))
+/* Max size for Primary Stream Arrays - 2^(n+1), where n is bits 12:15 */
+#define HCC_MAX_PSA (1 << ((((p) >> 12) & 0xf) + 1))
+/* Extended Capabilities pointer from PCI base - section 5.3.6 */
+#define HCC_EXT_CAPS(p) XHCI_HCC_EXT_CAPS(p)
+
+/* db_off bitmask - bits 0:1 reserved */
+#define DBOFF_MASK (~0x3)
+
+/* run_regs_off bitmask - bits 0:4 reserved */
+#define RTSOFF_MASK (~0x1f)
+
+
+/* Number of registers per port */
+#define NUM_PORT_REGS 4
+
+/**
+ * struct xhci_op_regs - xHCI Host Controller Operational Registers.
+ * @command: USBCMD - xHC command register
+ * @status: USBSTS - xHC status register
+ * @page_size: This indicates the page size that the host controller
+ * supports. If bit n is set, the HC supports a page size
+ * of 2^(n+12), up to a 128MB page size.
+ * 4K is the minimum page size.
+ * @cmd_ring: CRP - 64-bit Command Ring Pointer
+ * @dcbaa_ptr: DCBAAP - 64-bit Device Context Base Address Array Pointer
+ * @config_reg: CONFIG - Configure Register
+ * @port_status_base: PORTSCn - base address for Port Status and Control
+ * Each port has a Port Status and Control register,
+ * followed by a Port Power Management Status and Control
+ * register, a Port Link Info register, and a reserved
+ * register.
+ * @port_power_base: PORTPMSCn - base address for
+ * Port Power Management Status and Control
+ * @port_link_base: PORTLIn - base address for Port Link Info (current
+ * Link PM state and control) for USB 2.1 and USB 3.0
+ * devices.
+ */
+struct xhci_op_regs {
+ u32 command;
+ u32 status;
+ u32 page_size;
+ u32 reserved1;
+ u32 reserved2;
+ u32 dev_notification;
+ u32 cmd_ring[2];
+ /* rsvd: offset 0x20-2F */
+ u32 reserved3[4];
+ u32 dcbaa_ptr[2];
+ u32 config_reg;
+ /* rsvd: offset 0x3C-3FF */
+ u32 reserved4[241];
+ /* port 1 registers, which serve as a base address for other ports */
+ u32 port_status_base;
+ u32 port_power_base;
+ u32 port_link_base;
+ u32 reserved5;
+ /* registers for ports 2-255 */
+ u32 reserved6[NUM_PORT_REGS*254];
+};
+
+/* USBCMD - USB command - command bitmasks */
+/* start/stop HC execution - do not write unless HC is halted*/
+#define CMD_RUN XHCI_CMD_RUN
+/* Reset HC - resets internal HC state machine and all registers (except
+ * PCI config regs). HC does NOT drive a USB reset on the downstream ports.
+ * The xHCI driver must reinitialize the xHC after setting this bit.
+ */
+#define CMD_RESET (1 << 1)
+/* Event Interrupt Enable - a '1' allows interrupts from the host controller */
+#define CMD_EIE XHCI_CMD_EIE
+/* Host System Error Interrupt Enable - get out-of-band signal for HC errors */
+#define CMD_HSEIE XHCI_CMD_HSEIE
+/* bits 4:6 are reserved (and should be preserved on writes). */
+/* light reset (port status stays unchanged) - reset completed when this is 0 */
+#define CMD_LRESET (1 << 7)
+/* FIXME: ignoring host controller save/restore state for now. */
+#define CMD_CSS (1 << 8)
+#define CMD_CRS (1 << 9)
+/* Enable Wrap Event - '1' means xHC generates an event when MFINDEX wraps. */
+#define CMD_EWE XHCI_CMD_EWE
+/* MFINDEX power management - '1' means xHC can stop MFINDEX counter if all root
+ * hubs are in U3 (selective suspend), disconnect, disabled, or powered-off.
+ * '0' means the xHC can power it off if all ports are in the disconnect,
+ * disabled, or powered-off state.
+ */
+#define CMD_PM_INDEX (1 << 11)
+/* bits 12:31 are reserved (and should be preserved on writes). */
+
+/* USBSTS - USB status - status bitmasks */
+/* HC not running - set to 1 when run/stop bit is cleared. */
+#define STS_HALT XHCI_STS_HALT
+/* serious error, e.g. PCI parity error. The HC will clear the run/stop bit. */
+#define STS_FATAL (1 << 2)
+/* event interrupt - clear this prior to clearing any IP flags in IR set*/
+#define STS_EINT (1 << 3)
+/* port change detect */
+#define STS_PORT (1 << 4)
+/* bits 5:7 reserved and zeroed */
+/* save state status - '1' means xHC is saving state */
+#define STS_SAVE (1 << 8)
+/* restore state status - '1' means xHC is restoring state */
+#define STS_RESTORE (1 << 9)
+/* true: save or restore error */
+#define STS_SRE (1 << 10)
+/* true: Controller Not Ready to accept doorbell or op reg writes after reset */
+#define STS_CNR XHCI_STS_CNR
+/* true: internal Host Controller Error - SW needs to reset and reinitialize */
+#define STS_HCE (1 << 12)
+/* bits 13:31 reserved and should be preserved */
+
+/*
+ * DNCTRL - Device Notification Control Register - dev_notification bitmasks
+ * Generate a device notification event when the HC sees a transaction with a
+ * notification type that matches a bit set in this bit field.
+ */
+#define DEV_NOTE_MASK (0xffff)
+#define ENABLE_DEV_NOTE(x) (1 << x)
+/* Most of the device notification types should only be used for debug.
+ * SW does need to pay attention to function wake notifications.
+ */
+#define DEV_NOTE_FWAKE ENABLE_DEV_NOTE(1)
+
+/* CRCR - Command Ring Control Register - cmd_ring bitmasks */
+/* bit 0 is the command ring cycle state */
+/* stop ring operation after completion of the currently executing command */
+#define CMD_RING_PAUSE (1 << 1)
+/* stop ring immediately - abort the currently executing command */
+#define CMD_RING_ABORT (1 << 2)
+/* true: command ring is running */
+#define CMD_RING_RUNNING (1 << 3)
+/* bits 4:5 reserved and should be preserved */
+/* Command Ring pointer - bit mask for the lower 32 bits. */
+#define CMD_RING_ADDR_MASK (0xffffffc0)
+
+/* CONFIG - Configure Register - config_reg bitmasks */
+/* bits 0:7 - maximum number of device slots enabled (NumSlotsEn) */
+#define MAX_DEVS(p) ((p) & 0xff)
+/* bits 8:31 - reserved and should be preserved */
+
+/* PORTSC - Port Status and Control Register - port_status_base bitmasks */
+/* true: device connected */
+#define PORT_CONNECT (1 << 0)
+/* true: port enabled */
+#define PORT_PE (1 << 1)
+/* bit 2 reserved and zeroed */
+/* true: port has an over-current condition */
+#define PORT_OC (1 << 3)
+/* true: port reset signaling asserted */
+#define PORT_RESET (1 << 4)
+/* Port Link State - bits 5:8
+ * A read gives the current link PM state of the port,
+ * a write with Link State Write Strobe set sets the link state.
+ */
+/* true: port has power (see HCC_PPC) */
+#define PORT_POWER (1 << 9)
+/* bits 10:13 indicate device speed:
+ * 0 - undefined speed - port hasn't be initialized by a reset yet
+ * 1 - full speed
+ * 2 - low speed
+ * 3 - high speed
+ * 4 - super speed
+ * 5-15 reserved
+ */
+#define DEV_SPEED_MASK (0xf << 10)
+#define XDEV_FS (0x1 << 10)
+#define XDEV_LS (0x2 << 10)
+#define XDEV_HS (0x3 << 10)
+#define XDEV_SS (0x4 << 10)
+#define DEV_UNDEFSPEED(p) (((p) & DEV_SPEED_MASK) == (0x0<<10))
+#define DEV_FULLSPEED(p) (((p) & DEV_SPEED_MASK) == XDEV_FS)
+#define DEV_LOWSPEED(p) (((p) & DEV_SPEED_MASK) == XDEV_LS)
+#define DEV_HIGHSPEED(p) (((p) & DEV_SPEED_MASK) == XDEV_HS)
+#define DEV_SUPERSPEED(p) (((p) & DEV_SPEED_MASK) == XDEV_SS)
+/* Bits 20:23 in the Slot Context are the speed for the device */
+#define SLOT_SPEED_FS (XDEV_FS << 10)
+#define SLOT_SPEED_LS (XDEV_LS << 10)
+#define SLOT_SPEED_HS (XDEV_HS << 10)
+#define SLOT_SPEED_SS (XDEV_SS << 10)
+/* Port Indicator Control */
+#define PORT_LED_OFF (0 << 14)
+#define PORT_LED_AMBER (1 << 14)
+#define PORT_LED_GREEN (2 << 14)
+#define PORT_LED_MASK (3 << 14)
+/* Port Link State Write Strobe - set this when changing link state */
+#define PORT_LINK_STROBE (1 << 16)
+/* true: connect status change */
+#define PORT_CSC (1 << 17)
+/* true: port enable change */
+#define PORT_PEC (1 << 18)
+/* true: warm reset for a USB 3.0 device is done. A "hot" reset puts the port
+ * into an enabled state, and the device into the default state. A "warm" reset
+ * also resets the link, forcing the device through the link training sequence.
+ * SW can also look at the Port Reset register to see when warm reset is done.
+ */
+#define PORT_WRC (1 << 19)
+/* true: over-current change */
+#define PORT_OCC (1 << 20)
+/* true: reset change - 1 to 0 transition of PORT_RESET */
+#define PORT_RC (1 << 21)
+/* port link status change - set on some port link state transitions:
+ * Transition Reason
+ * ------------------------------------------------------------------------------
+ * - U3 to Resume Wakeup signaling from a device
+ * - Resume to Recovery to U0 USB 3.0 device resume
+ * - Resume to U0 USB 2.0 device resume
+ * - U3 to Recovery to U0 Software resume of USB 3.0 device complete
+ * - U3 to U0 Software resume of USB 2.0 device complete
+ * - U2 to U0 L1 resume of USB 2.1 device complete
+ * - U0 to U0 (???) L1 entry rejection by USB 2.1 device
+ * - U0 to disabled L1 entry error with USB 2.1 device
+ * - Any state to inactive Error on USB 3.0 port
+ */
+#define PORT_PLC (1 << 22)
+/* port configure error change - port failed to configure its link partner */
+#define PORT_CEC (1 << 23)
+/* bit 24 reserved */
+/* wake on connect (enable) */
+#define PORT_WKCONN_E (1 << 25)
+/* wake on disconnect (enable) */
+#define PORT_WKDISC_E (1 << 26)
+/* wake on over-current (enable) */
+#define PORT_WKOC_E (1 << 27)
+/* bits 28:29 reserved */
+/* true: device is removable - for USB 3.0 roothub emulation */
+#define PORT_DEV_REMOVE (1 << 30)
+/* Initiate a warm port reset - complete when PORT_WRC is '1' */
+#define PORT_WR (1 << 31)
+
+/* Port Power Management Status and Control - port_power_base bitmasks */
+/* Inactivity timer value for transitions into U1, in microseconds.
+ * Timeout can be up to 127us. 0xFF means an infinite timeout.
+ */
+#define PORT_U1_TIMEOUT(p) ((p) & 0xff)
+/* Inactivity timer value for transitions into U2 */
+#define PORT_U2_TIMEOUT(p) (((p) & 0xff) << 8)
+/* Bits 24:31 for port testing */
+
+
+/**
+ * struct xhci_intr_reg - Interrupt Register Set
+ * @irq_pending: IMAN - Interrupt Management Register. Used to enable
+ * interrupts and check for pending interrupts.
+ * @irq_control: IMOD - Interrupt Moderation Register.
+ * Used to throttle interrupts.
+ * @erst_size: Number of segments in the Event Ring Segment Table (ERST).
+ * @erst_base: ERST base address.
+ * @erst_dequeue: Event ring dequeue pointer.
+ *
+ * Each interrupter (defined by a MSI-X vector) has an event ring and an Event
+ * Ring Segment Table (ERST) associated with it. The event ring is comprised of
+ * multiple segments of the same size. The HC places events on the ring and
+ * "updates the Cycle bit in the TRBs to indicate to software the current
+ * position of the Enqueue Pointer." The HCD (Linux) processes those events and
+ * updates the dequeue pointer.
+ */
+struct xhci_intr_reg {
+ u32 irq_pending;
+ u32 irq_control;
+ u32 erst_size;
+ u32 rsvd;
+ u32 erst_base[2];
+ u32 erst_dequeue[2];
+};
+
+/* irq_pending bitmasks */
+#define ER_IRQ_PENDING(p) ((p) & 0x1)
+/* bits 2:31 need to be preserved */
+/* THIS IS BUGGY - FIXME - IP IS WRITE 1 TO CLEAR */
+#define ER_IRQ_CLEAR(p) ((p) & 0xfffffffe)
+#define ER_IRQ_ENABLE(p) ((ER_IRQ_CLEAR(p)) | 0x2)
+#define ER_IRQ_DISABLE(p) ((ER_IRQ_CLEAR(p)) & ~(0x2))
+
+/* irq_control bitmasks */
+/* Minimum interval between interrupts (in 250ns intervals). The interval
+ * between interrupts will be longer if there are no events on the event ring.
+ * Default is 4000 (1 ms).
+ */
+#define ER_IRQ_INTERVAL_MASK (0xffff)
+/* Counter used to count down the time to the next interrupt - HW use only */
+#define ER_IRQ_COUNTER_MASK (0xffff << 16)
+
+/* erst_size bitmasks */
+/* Preserve bits 16:31 of erst_size */
+#define ERST_SIZE_MASK (0xffff << 16)
+
+/* erst_dequeue bitmasks */
+/* Dequeue ERST Segment Index (DESI) - Segment number (or alias)
+ * where the current dequeue pointer lies. This is an optional HW hint.
+ */
+#define ERST_DESI_MASK (0x7)
+/* Event Handler Busy (EHB) - is the event ring scheduled to be serviced by
+ * a work queue (or delayed service routine)?
+ */
+#define ERST_EHB (1 << 3)
+#define ERST_PTR_MASK (0xf)
+
+/**
+ * struct xhci_run_regs
+ * @microframe_index:
+ * MFINDEX - current microframe number
+ *
+ * Section 5.5 Host Controller Runtime Registers:
+ * "Software should read and write these registers using only Dword (32 bit)
+ * or larger accesses"
+ */
+struct xhci_run_regs {
+ u32 microframe_index;
+ u32 rsvd[7];
+ struct xhci_intr_reg ir_set[128];
+};
+
+/**
+ * struct doorbell_array
+ *
+ * Section 5.6
+ */
+struct xhci_doorbell_array {
+ u32 doorbell[256];
+};
+
+#define DB_TARGET_MASK 0xFFFFFF00
+#define DB_STREAM_ID_MASK 0x0000FFFF
+#define DB_TARGET_HOST 0x0
+#define DB_STREAM_ID_HOST 0x0
+#define DB_MASK (0xff << 8)
+
+/* Endpoint Target - bits 0:7 */
+#define EPI_TO_DB(p) (((p) + 1) & 0xff)
+
+
+/**
+ * struct xhci_slot_ctx
+ * @dev_info: Route string, device speed, hub info, and last valid endpoint
+ * @dev_info2: Max exit latency for device number, root hub port number
+ * @tt_info: tt_info is used to construct split transaction tokens
+ * @dev_state: slot state and device address
+ *
+ * Slot Context - section 6.2.1.1. This assumes the HC uses 32-byte context
+ * structures. If the HC uses 64-byte contexts, there is an additional 32 bytes
+ * reserved at the end of the slot context for HC internal use.
+ */
+struct xhci_slot_ctx {
+ u32 dev_info;
+ u32 dev_info2;
+ u32 tt_info;
+ u32 dev_state;
+ /* offset 0x10 to 0x1f reserved for HC internal use */
+ u32 reserved[4];
+};
+
+/* dev_info bitmasks */
+/* Route String - 0:19 */
+#define ROUTE_STRING_MASK (0xfffff)
+/* Device speed - values defined by PORTSC Device Speed field - 20:23 */
+#define DEV_SPEED (0xf << 20)
+/* bit 24 reserved */
+/* Is this LS/FS device connected through a HS hub? - bit 25 */
+#define DEV_MTT (0x1 << 25)
+/* Set if the device is a hub - bit 26 */
+#define DEV_HUB (0x1 << 26)
+/* Index of the last valid endpoint context in this device context - 27:31 */
+#define LAST_CTX_MASK (0x1f << 27)
+#define LAST_CTX(p) ((p) << 27)
+#define LAST_CTX_TO_EP_NUM(p) (((p) >> 27) - 1)
+#define SLOT_FLAG (1 << 0)
+#define EP0_FLAG (1 << 1)
+
+/* dev_info2 bitmasks */
+/* Max Exit Latency (ms) - worst case time to wake up all links in dev path */
+#define MAX_EXIT (0xffff)
+/* Root hub port number that is needed to access the USB device */
+#define ROOT_HUB_PORT(p) (((p) & 0xff) << 16)
+
+/* tt_info bitmasks */
+/*
+ * TT Hub Slot ID - for low or full speed devices attached to a high-speed hub
+ * The Slot ID of the hub that isolates the high speed signaling from
+ * this low or full-speed device. '0' if attached to root hub port.
+ */
+#define TT_SLOT (0xff)
+/*
+ * The number of the downstream facing port of the high-speed hub
+ * '0' if the device is not low or full speed.
+ */
+#define TT_PORT (0xff << 8)
+
+/* dev_state bitmasks */
+/* USB device address - assigned by the HC */
+#define DEV_ADDR_MASK (0xff)
+/* bits 8:26 reserved */
+/* Slot state */
+#define SLOT_STATE (0x1f << 27)
+#define GET_SLOT_STATE(p) (((p) & (0x1f << 27)) >> 27)
+
+
+/**
+ * struct xhci_ep_ctx
+ * @ep_info: endpoint state, streams, mult, and interval information.
+ * @ep_info2: information on endpoint type, max packet size, max burst size,
+ * error count, and whether the HC will force an event for all
+ * transactions.
+ * @deq: 64-bit ring dequeue pointer address. If the endpoint only
+ * defines one stream, this points to the endpoint transfer ring.
+ * Otherwise, it points to a stream context array, which has a
+ * ring pointer for each flow.
+ * @tx_info:
+ * Average TRB lengths for the endpoint ring and
+ * max payload within an Endpoint Service Interval Time (ESIT).
+ *
+ * Endpoint Context - section 6.2.1.2. This assumes the HC uses 32-byte context
+ * structures. If the HC uses 64-byte contexts, there is an additional 32 bytes
+ * reserved at the end of the endpoint context for HC internal use.
+ */
+struct xhci_ep_ctx {
+ u32 ep_info;
+ u32 ep_info2;
+ u32 deq[2];
+ u32 tx_info;
+ /* offset 0x14 - 0x1f reserved for HC internal use */
+ u32 reserved[3];
+};
+
+/* ep_info bitmasks */
+/*
+ * Endpoint State - bits 0:2
+ * 0 - disabled
+ * 1 - running
+ * 2 - halted due to halt condition - ok to manipulate endpoint ring
+ * 3 - stopped
+ * 4 - TRB error
+ * 5-7 - reserved
+ */
+#define EP_STATE_MASK (0xf)
+#define EP_STATE_DISABLED 0
+#define EP_STATE_RUNNING 1
+#define EP_STATE_HALTED 2
+#define EP_STATE_STOPPED 3
+#define EP_STATE_ERROR 4
+/* Mult - Max number of burtst within an interval, in EP companion desc. */
+#define EP_MULT(p) ((p & 0x3) << 8)
+/* bits 10:14 are Max Primary Streams */
+/* bit 15 is Linear Stream Array */
+/* Interval - period between requests to an endpoint - 125u increments. */
+#define EP_INTERVAL(p) ((p & 0xff) << 16)
+
+/* ep_info2 bitmasks */
+/*
+ * Force Event - generate transfer events for all TRBs for this endpoint
+ * This will tell the HC to ignore the IOC and ISP flags (for debugging only).
+ */
+#define FORCE_EVENT (0x1)
+#define ERROR_COUNT(p) (((p) & 0x3) << 1)
+#define EP_TYPE(p) ((p) << 3)
+#define ISOC_OUT_EP 1
+#define BULK_OUT_EP 2
+#define INT_OUT_EP 3
+#define CTRL_EP 4
+#define ISOC_IN_EP 5
+#define BULK_IN_EP 6
+#define INT_IN_EP 7
+/* bit 6 reserved */
+/* bit 7 is Host Initiate Disable - for disabling stream selection */
+#define MAX_BURST(p) (((p)&0xff) << 8)
+#define MAX_PACKET(p) (((p)&0xffff) << 16)
+
+
+/**
+ * struct xhci_device_control
+ * Input/Output context; see section 6.2.5.
+ *
+ * @drop_context: set the bit of the endpoint context you want to disable
+ * @add_context: set the bit of the endpoint context you want to enable
+ */
+struct xhci_device_control {
+ u32 drop_flags;
+ u32 add_flags;
+ u32 rsvd[6];
+ struct xhci_slot_ctx slot;
+ struct xhci_ep_ctx ep[31];
+};
+
+/* drop context bitmasks */
+#define DROP_EP(x) (0x1 << x)
+/* add context bitmasks */
+#define ADD_EP(x) (0x1 << x)
+
+
+struct xhci_virt_device {
+ /*
+ * Commands to the hardware are passed an "input context" that
+ * tells the hardware what to change in its data structures.
+ * The hardware will return changes in an "output context" that
+ * software must allocate for the hardware. We need to keep
+ * track of input and output contexts separately because
+ * these commands might fail and we don't trust the hardware.
+ */
+ struct xhci_device_control *out_ctx;
+ dma_addr_t out_ctx_dma;
+ /* Used for addressing devices and configuration changes */
+ struct xhci_device_control *in_ctx;
+ dma_addr_t in_ctx_dma;
+ /* FIXME when stream support is added */
+ struct xhci_ring *ep_rings[31];
+ /* Temporary storage in case the configure endpoint command fails and we
+ * have to restore the device state to the previous state
+ */
+ struct xhci_ring *new_ep_rings[31];
+ struct completion cmd_completion;
+ /* Status of the last command issued for this device */
+ u32 cmd_status;
+};
+
+
+/**
+ * struct xhci_device_context_array
+ * @dev_context_ptr array of 64-bit DMA addresses for device contexts
+ */
+struct xhci_device_context_array {
+ /* 64-bit device addresses; we only write 32-bit addresses */
+ u32 dev_context_ptrs[2*MAX_HC_SLOTS];
+ /* private xHCD pointers */
+ dma_addr_t dma;
+};
+/* TODO: write function to set the 64-bit device DMA address */
+/*
+ * TODO: change this to be dynamically sized at HC mem init time since the HC
+ * might not be able to handle the maximum number of devices possible.
+ */
+
+
+struct xhci_stream_ctx {
+ /* 64-bit stream ring address, cycle state, and stream type */
+ u32 stream_ring[2];
+ /* offset 0x14 - 0x1f reserved for HC internal use */
+ u32 reserved[2];
+};
+
+
+struct xhci_transfer_event {
+ /* 64-bit buffer address, or immediate data */
+ u32 buffer[2];
+ u32 transfer_len;
+ /* This field is interpreted differently based on the type of TRB */
+ u32 flags;
+};
+
+/** Transfer Event bit fields **/
+#define TRB_TO_EP_ID(p) (((p) >> 16) & 0x1f)
+
+/* Completion Code - only applicable for some types of TRBs */
+#define COMP_CODE_MASK (0xff << 24)
+#define GET_COMP_CODE(p) (((p) & COMP_CODE_MASK) >> 24)
+#define COMP_SUCCESS 1
+/* Data Buffer Error */
+#define COMP_DB_ERR 2
+/* Babble Detected Error */
+#define COMP_BABBLE 3
+/* USB Transaction Error */
+#define COMP_TX_ERR 4
+/* TRB Error - some TRB field is invalid */
+#define COMP_TRB_ERR 5
+/* Stall Error - USB device is stalled */
+#define COMP_STALL 6
+/* Resource Error - HC doesn't have memory for that device configuration */
+#define COMP_ENOMEM 7
+/* Bandwidth Error - not enough room in schedule for this dev config */
+#define COMP_BW_ERR 8
+/* No Slots Available Error - HC ran out of device slots */
+#define COMP_ENOSLOTS 9
+/* Invalid Stream Type Error */
+#define COMP_STREAM_ERR 10
+/* Slot Not Enabled Error - doorbell rung for disabled device slot */
+#define COMP_EBADSLT 11
+/* Endpoint Not Enabled Error */
+#define COMP_EBADEP 12
+/* Short Packet */
+#define COMP_SHORT_TX 13
+/* Ring Underrun - doorbell rung for an empty isoc OUT ep ring */
+#define COMP_UNDERRUN 14
+/* Ring Overrun - isoc IN ep ring is empty when ep is scheduled to RX */
+#define COMP_OVERRUN 15
+/* Virtual Function Event Ring Full Error */
+#define COMP_VF_FULL 16
+/* Parameter Error - Context parameter is invalid */
+#define COMP_EINVAL 17
+/* Bandwidth Overrun Error - isoc ep exceeded its allocated bandwidth */
+#define COMP_BW_OVER 18
+/* Context State Error - illegal context state transition requested */
+#define COMP_CTX_STATE 19
+/* No Ping Response Error - HC didn't get PING_RESPONSE in time to TX */
+#define COMP_PING_ERR 20
+/* Event Ring is full */
+#define COMP_ER_FULL 21
+/* Missed Service Error - HC couldn't service an isoc ep within interval */
+#define COMP_MISSED_INT 23
+/* Successfully stopped command ring */
+#define COMP_CMD_STOP 24
+/* Successfully aborted current command and stopped command ring */
+#define COMP_CMD_ABORT 25
+/* Stopped - transfer was terminated by a stop endpoint command */
+#define COMP_STOP 26
+/* Same as COMP_EP_STOPPED, but the transfered length in the event is invalid */
+#define COMP_STOP_INVAL 27
+/* Control Abort Error - Debug Capability - control pipe aborted */
+#define COMP_DBG_ABORT 28
+/* TRB type 29 and 30 reserved */
+/* Isoc Buffer Overrun - an isoc IN ep sent more data than could fit in TD */
+#define COMP_BUFF_OVER 31
+/* Event Lost Error - xHC has an "internal event overrun condition" */
+#define COMP_ISSUES 32
+/* Undefined Error - reported when other error codes don't apply */
+#define COMP_UNKNOWN 33
+/* Invalid Stream ID Error */
+#define COMP_STRID_ERR 34
+/* Secondary Bandwidth Error - may be returned by a Configure Endpoint cmd */
+/* FIXME - check for this */
+#define COMP_2ND_BW_ERR 35
+/* Split Transaction Error */
+#define COMP_SPLIT_ERR 36
+
+struct xhci_link_trb {
+ /* 64-bit segment pointer*/
+ u32 segment_ptr[2];
+ u32 intr_target;
+ u32 control;
+};
+
+/* control bitfields */
+#define LINK_TOGGLE (0x1<<1)
+
+/* Command completion event TRB */
+struct xhci_event_cmd {
+ /* Pointer to command TRB, or the value passed by the event data trb */
+ u32 cmd_trb[2];
+ u32 status;
+ u32 flags;
+};
+
+/* flags bitmasks */
+/* bits 16:23 are the virtual function ID */
+/* bits 24:31 are the slot ID */
+#define TRB_TO_SLOT_ID(p) (((p) & (0xff<<24)) >> 24)
+#define SLOT_ID_FOR_TRB(p) (((p) & 0xff) << 24)
+
+/* Stop Endpoint TRB - ep_index to endpoint ID for this TRB */
+#define TRB_TO_EP_INDEX(p) ((((p) & (0x1f << 16)) >> 16) - 1)
+#define EP_ID_FOR_TRB(p) ((((p) + 1) & 0x1f) << 16)
+
+
+/* Port Status Change Event TRB fields */
+/* Port ID - bits 31:24 */
+#define GET_PORT_ID(p) (((p) & (0xff << 24)) >> 24)
+
+/* Normal TRB fields */
+/* transfer_len bitmasks - bits 0:16 */
+#define TRB_LEN(p) ((p) & 0x1ffff)
+/* TD size - number of bytes remaining in the TD (including this TRB):
+ * bits 17 - 21. Shift the number of bytes by 10. */
+#define TD_REMAINDER(p) ((((p) >> 10) & 0x1f) << 17)
+/* Interrupter Target - which MSI-X vector to target the completion event at */
+#define TRB_INTR_TARGET(p) (((p) & 0x3ff) << 22)
+#define GET_INTR_TARGET(p) (((p) >> 22) & 0x3ff)
+
+/* Cycle bit - indicates TRB ownership by HC or HCD */
+#define TRB_CYCLE (1<<0)
+/*
+ * Force next event data TRB to be evaluated before task switch.
+ * Used to pass OS data back after a TD completes.
+ */
+#define TRB_ENT (1<<1)
+/* Interrupt on short packet */
+#define TRB_ISP (1<<2)
+/* Set PCIe no snoop attribute */
+#define TRB_NO_SNOOP (1<<3)
+/* Chain multiple TRBs into a TD */
+#define TRB_CHAIN (1<<4)
+/* Interrupt on completion */
+#define TRB_IOC (1<<5)
+/* The buffer pointer contains immediate data */
+#define TRB_IDT (1<<6)
+
+
+/* Control transfer TRB specific fields */
+#define TRB_DIR_IN (1<<16)
+
+struct xhci_generic_trb {
+ u32 field[4];
+};
+
+union xhci_trb {
+ struct xhci_link_trb link;
+ struct xhci_transfer_event trans_event;
+ struct xhci_event_cmd event_cmd;
+ struct xhci_generic_trb generic;
+};
+
+/* TRB bit mask */
+#define TRB_TYPE_BITMASK (0xfc00)
+#define TRB_TYPE(p) ((p) << 10)
+/* TRB type IDs */
+/* bulk, interrupt, isoc scatter/gather, and control data stage */
+#define TRB_NORMAL 1
+/* setup stage for control transfers */
+#define TRB_SETUP 2
+/* data stage for control transfers */
+#define TRB_DATA 3
+/* status stage for control transfers */
+#define TRB_STATUS 4
+/* isoc transfers */
+#define TRB_ISOC 5
+/* TRB for linking ring segments */
+#define TRB_LINK 6
+#define TRB_EVENT_DATA 7
+/* Transfer Ring No-op (not for the command ring) */
+#define TRB_TR_NOOP 8
+/* Command TRBs */
+/* Enable Slot Command */
+#define TRB_ENABLE_SLOT 9
+/* Disable Slot Command */
+#define TRB_DISABLE_SLOT 10
+/* Address Device Command */
+#define TRB_ADDR_DEV 11
+/* Configure Endpoint Command */
+#define TRB_CONFIG_EP 12
+/* Evaluate Context Command */
+#define TRB_EVAL_CONTEXT 13
+/* Reset Transfer Ring Command */
+#define TRB_RESET_RING 14
+/* Stop Transfer Ring Command */
+#define TRB_STOP_RING 15
+/* Set Transfer Ring Dequeue Pointer Command */
+#define TRB_SET_DEQ 16
+/* Reset Device Command */
+#define TRB_RESET_DEV 17
+/* Force Event Command (opt) */
+#define TRB_FORCE_EVENT 18
+/* Negotiate Bandwidth Command (opt) */
+#define TRB_NEG_BANDWIDTH 19
+/* Set Latency Tolerance Value Command (opt) */
+#define TRB_SET_LT 20
+/* Get port bandwidth Command */
+#define TRB_GET_BW 21
+/* Force Header Command - generate a transaction or link management packet */
+#define TRB_FORCE_HEADER 22
+/* No-op Command - not for transfer rings */
+#define TRB_CMD_NOOP 23
+/* TRB IDs 24-31 reserved */
+/* Event TRBS */
+/* Transfer Event */
+#define TRB_TRANSFER 32
+/* Command Completion Event */
+#define TRB_COMPLETION 33
+/* Port Status Change Event */
+#define TRB_PORT_STATUS 34
+/* Bandwidth Request Event (opt) */
+#define TRB_BANDWIDTH_EVENT 35
+/* Doorbell Event (opt) */
+#define TRB_DOORBELL 36
+/* Host Controller Event */
+#define TRB_HC_EVENT 37
+/* Device Notification Event - device sent function wake notification */
+#define TRB_DEV_NOTE 38
+/* MFINDEX Wrap Event - microframe counter wrapped */
+#define TRB_MFINDEX_WRAP 39
+/* TRB IDs 40-47 reserved, 48-63 is vendor-defined */
+
+/*
+ * TRBS_PER_SEGMENT must be a multiple of 4,
+ * since the command ring is 64-byte aligned.
+ * It must also be greater than 16.
+ */
+#define TRBS_PER_SEGMENT 64
+#define SEGMENT_SIZE (TRBS_PER_SEGMENT*16)
+/* TRB buffer pointers can't cross 64KB boundaries */
+#define TRB_MAX_BUFF_SHIFT 16
+#define TRB_MAX_BUFF_SIZE (1 << TRB_MAX_BUFF_SHIFT)
+
+struct xhci_segment {
+ union xhci_trb *trbs;
+ /* private to HCD */
+ struct xhci_segment *next;
+ dma_addr_t dma;
+};
+
+struct xhci_td {
+ struct list_head td_list;
+ struct list_head cancelled_td_list;
+ struct urb *urb;
+ struct xhci_segment *start_seg;
+ union xhci_trb *first_trb;
+ union xhci_trb *last_trb;
+};
+
+struct xhci_ring {
+ struct xhci_segment *first_seg;
+ union xhci_trb *enqueue;
+ struct xhci_segment *enq_seg;
+ unsigned int enq_updates;
+ union xhci_trb *dequeue;
+ struct xhci_segment *deq_seg;
+ unsigned int deq_updates;
+ struct list_head td_list;
+ /* ---- Related to URB cancellation ---- */
+ struct list_head cancelled_td_list;
+ unsigned int cancels_pending;
+ unsigned int state;
+#define SET_DEQ_PENDING (1 << 0)
+ /* The TRB that was last reported in a stopped endpoint ring */
+ union xhci_trb *stopped_trb;
+ struct xhci_td *stopped_td;
+ /*
+ * Write the cycle state into the TRB cycle field to give ownership of
+ * the TRB to the host controller (if we are the producer), or to check
+ * if we own the TRB (if we are the consumer). See section 4.9.1.
+ */
+ u32 cycle_state;
+};
+
+struct xhci_erst_entry {
+ /* 64-bit event ring segment address */
+ u32 seg_addr[2];
+ u32 seg_size;
+ /* Set to zero */
+ u32 rsvd;
+};
+
+struct xhci_erst {
+ struct xhci_erst_entry *entries;
+ unsigned int num_entries;
+ /* xhci->event_ring keeps track of segment dma addresses */
+ dma_addr_t erst_dma_addr;
+ /* Num entries the ERST can contain */
+ unsigned int erst_size;
+};
+
+/*
+ * Each segment table entry is 4*32bits long. 1K seems like an ok size:
+ * (1K bytes * 8bytes/bit) / (4*32 bits) = 64 segment entries in the table,
+ * meaning 64 ring segments.
+ * Initial allocated size of the ERST, in number of entries */
+#define ERST_NUM_SEGS 1
+/* Initial allocated size of the ERST, in number of entries */
+#define ERST_SIZE 64
+/* Initial number of event segment rings allocated */
+#define ERST_ENTRIES 1
+/* Poll every 60 seconds */
+#define POLL_TIMEOUT 60
+/* XXX: Make these module parameters */
+
+
+/* There is one ehci_hci structure per controller */
+struct xhci_hcd {
+ /* glue to PCI and HCD framework */
+ struct xhci_cap_regs __iomem *cap_regs;
+ struct xhci_op_regs __iomem *op_regs;
+ struct xhci_run_regs __iomem *run_regs;
+ struct xhci_doorbell_array __iomem *dba;
+ /* Our HCD's current interrupter register set */
+ struct xhci_intr_reg __iomem *ir_set;
+
+ /* Cached register copies of read-only HC data */
+ __u32 hcs_params1;
+ __u32 hcs_params2;
+ __u32 hcs_params3;
+ __u32 hcc_params;
+
+ spinlock_t lock;
+
+ /* packed release number */
+ u8 sbrn;
+ u16 hci_version;
+ u8 max_slots;
+ u8 max_interrupters;
+ u8 max_ports;
+ u8 isoc_threshold;
+ int event_ring_max;
+ int addr_64;
+ /* 4KB min, 128MB max */
+ int page_size;
+ /* Valid values are 12 to 20, inclusive */
+ int page_shift;
+ /* only one MSI vector for now, but might need more later */
+ int msix_count;
+ struct msix_entry *msix_entries;
+ /* data structures */
+ struct xhci_device_context_array *dcbaa;
+ struct xhci_ring *cmd_ring;
+ struct xhci_ring *event_ring;
+ struct xhci_erst erst;
+ /* slot enabling and address device helpers */
+ struct completion addr_dev;
+ int slot_id;
+ /* Internal mirror of the HW's dcbaa */
+ struct xhci_virt_device *devs[MAX_HC_SLOTS];
+
+ /* DMA pools */
+ struct dma_pool *device_pool;
+ struct dma_pool *segment_pool;
+
+#ifdef CONFIG_USB_XHCI_HCD_DEBUGGING
+ /* Poll the rings - for debugging */
+ struct timer_list event_ring_timer;
+ int zombie;
+#endif
+ /* Statistics */
+ int noops_submitted;
+ int noops_handled;
+ int error_bitmask;
+};
+
+/* For testing purposes */
+#define NUM_TEST_NOOPS 0
+
+/* convert between an HCD pointer and the corresponding EHCI_HCD */
+static inline struct xhci_hcd *hcd_to_xhci(struct usb_hcd *hcd)
+{
+ return (struct xhci_hcd *) (hcd->hcd_priv);
+}
+
+static inline struct usb_hcd *xhci_to_hcd(struct xhci_hcd *xhci)
+{
+ return container_of((void *) xhci, struct usb_hcd, hcd_priv);
+}
+
+#ifdef CONFIG_USB_XHCI_HCD_DEBUGGING
+#define XHCI_DEBUG 1
+#else
+#define XHCI_DEBUG 0
+#endif
+
+#define xhci_dbg(xhci, fmt, args...) \
+ do { if (XHCI_DEBUG) dev_dbg(xhci_to_hcd(xhci)->self.controller , fmt , ## args); } while (0)
+#define xhci_info(xhci, fmt, args...) \
+ do { if (XHCI_DEBUG) dev_info(xhci_to_hcd(xhci)->self.controller , fmt , ## args); } while (0)
+#define xhci_err(xhci, fmt, args...) \
+ dev_err(xhci_to_hcd(xhci)->self.controller , fmt , ## args)
+#define xhci_warn(xhci, fmt, args...) \
+ dev_warn(xhci_to_hcd(xhci)->self.controller , fmt , ## args)
+
+/* TODO: copied from ehci.h - can be refactored? */
+/* xHCI spec says all registers are little endian */
+static inline unsigned int xhci_readl(const struct xhci_hcd *xhci,
+ __u32 __iomem *regs)
+{
+ return readl(regs);
+}
+static inline void xhci_writel(struct xhci_hcd *xhci,
+ const unsigned int val, __u32 __iomem *regs)
+{
+ if (!in_interrupt())
+ xhci_dbg(xhci,
+ "`MEM_WRITE_DWORD(3'b000, 32'h%p, 32'h%0x, 4'hf);\n",
+ regs, val);
+ writel(val, regs);
+}
+
+/* xHCI debugging */
+void xhci_print_ir_set(struct xhci_hcd *xhci, struct xhci_intr_reg *ir_set, int set_num);
+void xhci_print_registers(struct xhci_hcd *xhci);
+void xhci_dbg_regs(struct xhci_hcd *xhci);
+void xhci_print_run_regs(struct xhci_hcd *xhci);
+void xhci_print_trb_offsets(struct xhci_hcd *xhci, union xhci_trb *trb);
+void xhci_debug_trb(struct xhci_hcd *xhci, union xhci_trb *trb);
+void xhci_debug_segment(struct xhci_hcd *xhci, struct xhci_segment *seg);
+void xhci_debug_ring(struct xhci_hcd *xhci, struct xhci_ring *ring);
+void xhci_dbg_erst(struct xhci_hcd *xhci, struct xhci_erst *erst);
+void xhci_dbg_cmd_ptrs(struct xhci_hcd *xhci);
+void xhci_dbg_ring_ptrs(struct xhci_hcd *xhci, struct xhci_ring *ring);
+void xhci_dbg_ctx(struct xhci_hcd *xhci, struct xhci_device_control *ctx, dma_addr_t dma, unsigned int last_ep);
+
+/* xHCI memory managment */
+void xhci_mem_cleanup(struct xhci_hcd *xhci);
+int xhci_mem_init(struct xhci_hcd *xhci, gfp_t flags);
+void xhci_free_virt_device(struct xhci_hcd *xhci, int slot_id);
+int xhci_alloc_virt_device(struct xhci_hcd *xhci, int slot_id, struct usb_device *udev, gfp_t flags);
+int xhci_setup_addressable_virt_dev(struct xhci_hcd *xhci, struct usb_device *udev);
+unsigned int xhci_get_endpoint_index(struct usb_endpoint_descriptor *desc);
+unsigned int xhci_get_endpoint_flag(struct usb_endpoint_descriptor *desc);
+void xhci_endpoint_zero(struct xhci_hcd *xhci, struct xhci_virt_device *virt_dev, struct usb_host_endpoint *ep);
+int xhci_endpoint_init(struct xhci_hcd *xhci, struct xhci_virt_device *virt_dev,
+ struct usb_device *udev, struct usb_host_endpoint *ep,
+ gfp_t mem_flags);
+void xhci_ring_free(struct xhci_hcd *xhci, struct xhci_ring *ring);
+
+#ifdef CONFIG_PCI
+/* xHCI PCI glue */
+int xhci_register_pci(void);
+void xhci_unregister_pci(void);
+#endif
+
+/* xHCI host controller glue */
+int xhci_halt(struct xhci_hcd *xhci);
+int xhci_reset(struct xhci_hcd *xhci);
+int xhci_init(struct usb_hcd *hcd);
+int xhci_run(struct usb_hcd *hcd);
+void xhci_stop(struct usb_hcd *hcd);
+void xhci_shutdown(struct usb_hcd *hcd);
+int xhci_get_frame(struct usb_hcd *hcd);
+irqreturn_t xhci_irq(struct usb_hcd *hcd);
+int xhci_alloc_dev(struct usb_hcd *hcd, struct usb_device *udev);
+void xhci_free_dev(struct usb_hcd *hcd, struct usb_device *udev);
+int xhci_address_device(struct usb_hcd *hcd, struct usb_device *udev);
+int xhci_urb_enqueue(struct usb_hcd *hcd, struct urb *urb, gfp_t mem_flags);
+int xhci_urb_dequeue(struct usb_hcd *hcd, struct urb *urb, int status);
+int xhci_add_endpoint(struct usb_hcd *hcd, struct usb_device *udev, struct usb_host_endpoint *ep);
+int xhci_drop_endpoint(struct usb_hcd *hcd, struct usb_device *udev, struct usb_host_endpoint *ep);
+int xhci_check_bandwidth(struct usb_hcd *hcd, struct usb_device *udev);
+void xhci_reset_bandwidth(struct usb_hcd *hcd, struct usb_device *udev);
+
+/* xHCI ring, segment, TRB, and TD functions */
+dma_addr_t xhci_trb_virt_to_dma(struct xhci_segment *seg, union xhci_trb *trb);
+void xhci_ring_cmd_db(struct xhci_hcd *xhci);
+void *xhci_setup_one_noop(struct xhci_hcd *xhci);
+void xhci_handle_event(struct xhci_hcd *xhci);
+void xhci_set_hc_event_deq(struct xhci_hcd *xhci);
+int xhci_queue_slot_control(struct xhci_hcd *xhci, u32 trb_type, u32 slot_id);
+int xhci_queue_address_device(struct xhci_hcd *xhci, dma_addr_t in_ctx_ptr,
+ u32 slot_id);
+int xhci_queue_stop_endpoint(struct xhci_hcd *xhci, int slot_id,
+ unsigned int ep_index);
+int xhci_queue_ctrl_tx(struct xhci_hcd *xhci, gfp_t mem_flags, struct urb *urb,
+ int slot_id, unsigned int ep_index);
+int xhci_queue_bulk_tx(struct xhci_hcd *xhci, gfp_t mem_flags, struct urb *urb,
+ int slot_id, unsigned int ep_index);
+int xhci_queue_configure_endpoint(struct xhci_hcd *xhci, dma_addr_t in_ctx_ptr,
+ u32 slot_id);
+
+/* xHCI roothub code */
+int xhci_hub_control(struct usb_hcd *hcd, u16 typeReq, u16 wValue, u16 wIndex,
+ char *buf, u16 wLength);
+int xhci_hub_status_data(struct usb_hcd *hcd, char *buf);
+
+#endif /* __LINUX_XHCI_HCD_H */