diff options
Diffstat (limited to 'drivers/serial')
| -rw-r--r-- | drivers/serial/serial_txx9.c | 276 |
1 files changed, 184 insertions, 92 deletions
diff --git a/drivers/serial/serial_txx9.c b/drivers/serial/serial_txx9.c index f4440d32931..509ace7e688 100644 --- a/drivers/serial/serial_txx9.c +++ b/drivers/serial/serial_txx9.c @@ -38,6 +38,8 @@ * Fix some spin_locks. * Do not call uart_add_one_port for absent ports. * 1.07 Use CONFIG_SERIAL_TXX9_NR_UARTS. Cleanup. + * 1.08 Use platform_device. + * Fix and cleanup suspend/resume/initialization codes. */ #if defined(CONFIG_SERIAL_TXX9_CONSOLE) && defined(CONFIG_MAGIC_SYSRQ) @@ -50,7 +52,7 @@ #include <linux/console.h> #include <linux/sysrq.h> #include <linux/delay.h> -#include <linux/device.h> +#include <linux/platform_device.h> #include <linux/pci.h> #include <linux/tty.h> #include <linux/tty_flip.h> @@ -60,7 +62,7 @@ #include <asm/io.h> -static char *serial_version = "1.07"; +static char *serial_version = "1.08"; static char *serial_name = "TX39/49 Serial driver"; #define PASS_LIMIT 256 @@ -94,12 +96,7 @@ static char *serial_name = "TX39/49 Serial driver"; struct uart_txx9_port { struct uart_port port; - - /* - * We provide a per-port pm hook. - */ - void (*pm)(struct uart_port *port, - unsigned int state, unsigned int old); + /* No additional info for now */ }; #define TXX9_REGION_SIZE 0x24 @@ -277,6 +274,31 @@ static void serial_txx9_enable_ms(struct uart_port *port) /* TXX9-SIO can not control DTR... */ } +static void serial_txx9_initialize(struct uart_port *port) +{ + struct uart_txx9_port *up = (struct uart_txx9_port *)port; + unsigned int tmout = 10000; + + sio_out(up, TXX9_SIFCR, TXX9_SIFCR_SWRST); + /* TX4925 BUG WORKAROUND. Accessing SIOC register + * immediately after soft reset causes bus error. */ + mmiowb(); + udelay(1); + while ((sio_in(up, TXX9_SIFCR) & TXX9_SIFCR_SWRST) && --tmout) + udelay(1); + /* TX Int by FIFO Empty, RX Int by Receiving 1 char. */ + sio_set(up, TXX9_SIFCR, + TXX9_SIFCR_TDIL_MAX | TXX9_SIFCR_RDIL_1); + /* initial settings */ + sio_out(up, TXX9_SILCR, + TXX9_SILCR_UMODE_8BIT | TXX9_SILCR_USBL_1BIT | + ((up->port.flags & UPF_TXX9_USE_SCLK) ? + TXX9_SILCR_SCS_SCLK_BG : TXX9_SILCR_SCS_IMCLK_BG)); + sio_quot_set(up, uart_get_divisor(port, 9600)); + sio_out(up, TXX9_SIFLCR, TXX9_SIFLCR_RTSTL_MAX /* 15 */); + sio_out(up, TXX9_SIDICR, 0); +} + static inline void receive_chars(struct uart_txx9_port *up, unsigned int *status) { @@ -657,9 +679,8 @@ static void serial_txx9_pm(struct uart_port *port, unsigned int state, unsigned int oldstate) { - struct uart_txx9_port *up = (struct uart_txx9_port *)port; - if (up->pm) - up->pm(port, state, oldstate); + if (state == 0) + serial_txx9_initialize(port); } static int serial_txx9_request_resource(struct uart_txx9_port *up) @@ -732,7 +753,6 @@ static int serial_txx9_request_port(struct uart_port *port) static void serial_txx9_config_port(struct uart_port *port, int uflags) { struct uart_txx9_port *up = (struct uart_txx9_port *)port; - unsigned long flags; int ret; /* @@ -749,30 +769,7 @@ static void serial_txx9_config_port(struct uart_port *port, int uflags) if (up->port.line == up->port.cons->index) return; #endif - spin_lock_irqsave(&up->port.lock, flags); - /* - * Reset the UART. - */ - sio_out(up, TXX9_SIFCR, TXX9_SIFCR_SWRST); -#ifdef CONFIG_CPU_TX49XX - /* TX4925 BUG WORKAROUND. Accessing SIOC register - * immediately after soft reset causes bus error. */ - iob(); - udelay(1); -#endif - while (sio_in(up, TXX9_SIFCR) & TXX9_SIFCR_SWRST) - ; - /* TX Int by FIFO Empty, RX Int by Receiving 1 char. */ - sio_set(up, TXX9_SIFCR, - TXX9_SIFCR_TDIL_MAX | TXX9_SIFCR_RDIL_1); - /* initial settings */ - sio_out(up, TXX9_SILCR, - TXX9_SILCR_UMODE_8BIT | TXX9_SILCR_USBL_1BIT | - ((up->port.flags & UPF_TXX9_USE_SCLK) ? - TXX9_SILCR_SCS_SCLK_BG : TXX9_SILCR_SCS_IMCLK_BG)); - sio_quot_set(up, uart_get_divisor(port, 9600)); - sio_out(up, TXX9_SIFLCR, TXX9_SIFLCR_RTSTL_MAX /* 15 */); - spin_unlock_irqrestore(&up->port.lock, flags); + serial_txx9_initialize(port); } static int @@ -818,7 +815,8 @@ static struct uart_ops serial_txx9_pops = { static struct uart_txx9_port serial_txx9_ports[UART_NR]; -static void __init serial_txx9_register_ports(struct uart_driver *drv) +static void __init serial_txx9_register_ports(struct uart_driver *drv, + struct device *dev) { int i; @@ -827,6 +825,7 @@ static void __init serial_txx9_register_ports(struct uart_driver *drv) up->port.line = i; up->port.ops = &serial_txx9_pops; + up->port.dev = dev; if (up->port.iobase || up->port.mapbase) uart_add_one_port(drv, &up->port); } @@ -898,7 +897,7 @@ serial_txx9_console_write(struct console *co, const char *s, unsigned int count) sio_out(up, TXX9_SIDICR, ier); } -static int serial_txx9_console_setup(struct console *co, char *options) +static int __init serial_txx9_console_setup(struct console *co, char *options) { struct uart_port *port; struct uart_txx9_port *up; @@ -919,17 +918,7 @@ static int serial_txx9_console_setup(struct console *co, char *options) if (!port->ops) return -ENODEV; - /* - * Disable UART interrupts, set DTR and RTS high - * and set speed. - */ - sio_out(up, TXX9_SIDICR, 0); - /* initial settings */ - sio_out(up, TXX9_SILCR, - TXX9_SILCR_UMODE_8BIT | TXX9_SILCR_USBL_1BIT | - ((port->flags & UPF_TXX9_USE_SCLK) ? - TXX9_SILCR_SCS_SCLK_BG : TXX9_SILCR_SCS_IMCLK_BG)); - sio_out(up, TXX9_SIFLCR, TXX9_SIFLCR_RTSTL_MAX /* 15 */); + serial_txx9_initialize(&up->port); if (options) uart_parse_options(options, &baud, &parity, &bits, &flow); @@ -981,31 +970,6 @@ int __init early_serial_txx9_setup(struct uart_port *port) return 0; } -#ifdef ENABLE_SERIAL_TXX9_PCI -#ifdef CONFIG_PM -/** - * serial_txx9_suspend_port - suspend one serial port - * @line: serial line number - * - * Suspend one serial port. - */ -static void serial_txx9_suspend_port(int line) -{ - uart_suspend_port(&serial_txx9_reg, &serial_txx9_ports[line].port); -} - -/** - * serial_txx9_resume_port - resume one serial port - * @line: serial line number - * - * Resume one serial port. - */ -static void serial_txx9_resume_port(int line) -{ - uart_resume_port(&serial_txx9_reg, &serial_txx9_ports[line].port); -} -#endif - static DEFINE_MUTEX(serial_txx9_mutex); /** @@ -1028,8 +992,18 @@ static int __devinit serial_txx9_register_port(struct uart_port *port) mutex_lock(&serial_txx9_mutex); for (i = 0; i < UART_NR; i++) { uart = &serial_txx9_ports[i]; - if (!(uart->port.iobase || uart->port.mapbase)) + if (uart_match_port(&uart->port, port)) { + uart_remove_one_port(&serial_txx9_reg, &uart->port); break; + } + } + if (i == UART_NR) { + /* Find unused port */ + for (i = 0; i < UART_NR; i++) { + uart = &serial_txx9_ports[i]; + if (!(uart->port.iobase || uart->port.mapbase)) + break; + } } if (i < UART_NR) { uart->port.iobase = port->iobase; @@ -1072,6 +1046,95 @@ static void __devexit serial_txx9_unregister_port(int line) } /* + * Register a set of serial devices attached to a platform device. + */ +static int __devinit serial_txx9_probe(struct platform_device *dev) +{ + struct uart_port *p = dev->dev.platform_data; + struct uart_port port; + int ret, i; + + memset(&port, 0, sizeof(struct uart_port)); + for (i = 0; p && p->uartclk != 0; p++, i++) { + port.iobase = p->iobase; + port.membase = p->membase; + port.irq = p->irq; + port.uartclk = p->uartclk; + port.iotype = p->iotype; + port.flags = p->flags; + port.mapbase = p->mapbase; + port.dev = &dev->dev; + ret = serial_txx9_register_port(&port); + if (ret < 0) { + dev_err(&dev->dev, "unable to register port at index %d " + "(IO%x MEM%lx IRQ%d): %d\n", i, + p->iobase, p->mapbase, p->irq, ret); + } + } + return 0; +} + +/* + * Remove serial ports registered against a platform device. + */ +static int __devexit serial_txx9_remove(struct platform_device *dev) +{ + int i; + + for (i = 0; i < UART_NR; i++) { + struct uart_txx9_port *up = &serial_txx9_ports[i]; + + if (up->port.dev == &dev->dev) + serial_txx9_unregister_port(i); + } + return 0; +} + +#ifdef CONFIG_PM +static int serial_txx9_suspend(struct platform_device *dev, pm_message_t state) +{ + int i; + + for (i = 0; i < UART_NR; i++) { + struct uart_txx9_port *up = &serial_txx9_ports[i]; + + if (up->port.type != PORT_UNKNOWN && up->port.dev == &dev->dev) + uart_suspend_port(&serial_txx9_reg, &up->port); + } + + return 0; +} + +static int serial_txx9_resume(struct platform_device *dev) +{ + int i; + + for (i = 0; i < UART_NR; i++) { + struct uart_txx9_port *up = &serial_txx9_ports[i]; + + if (up->port.type != PORT_UNKNOWN && up->port.dev == &dev->dev) + uart_resume_port(&serial_txx9_reg, &up->port); + } + + return 0; +} +#endif + +static struct platform_driver serial_txx9_plat_driver = { + .probe = serial_txx9_probe, + .remove = __devexit_p(serial_txx9_remove), +#ifdef CONFIG_PM + .suspend = serial_txx9_suspend, + .resume = serial_txx9_resume, +#endif + .driver = { + .name = "serial_txx9", + .owner = THIS_MODULE, + }, +}; + +#ifdef ENABLE_SERIAL_TXX9_PCI +/* * Probe one serial board. Unfortunately, there is no rhyme nor reason * to the arrangement of serial ports on a PCI card. */ @@ -1097,20 +1160,22 @@ pciserial_txx9_init_one(struct pci_dev *dev, const struct pci_device_id *ent) line = serial_txx9_register_port(&port); if (line < 0) { printk(KERN_WARNING "Couldn't register serial port %s: %d\n", pci_name(dev), line); + pci_disable_device(dev); + return line; } - pci_set_drvdata(dev, (void *)(long)line); + pci_set_drvdata(dev, &serial_txx9_ports[line]); return 0; } static void __devexit pciserial_txx9_remove_one(struct pci_dev *dev) { - int line = (int)(long)pci_get_drvdata(dev); + struct uart_txx9_port *up = pci_get_drvdata(dev); pci_set_drvdata(dev, NULL); - if (line) { - serial_txx9_unregister_port(line); + if (up) { + serial_txx9_unregister_port(up->port.line); pci_disable_device(dev); } } @@ -1118,10 +1183,10 @@ static void __devexit pciserial_txx9_remove_one(struct pci_dev *dev) #ifdef CONFIG_PM static int pciserial_txx9_suspend_one(struct pci_dev *dev, pm_message_t state) { - int line = (int)(long)pci_get_drvdata(dev); + struct uart_txx9_port *up = pci_get_drvdata(dev); - if (line) - serial_txx9_suspend_port(line); + if (up) + uart_suspend_port(&serial_txx9_reg, &up->port); pci_save_state(dev); pci_set_power_state(dev, pci_choose_state(dev, state)); return 0; @@ -1129,15 +1194,12 @@ static int pciserial_txx9_suspend_one(struct pci_dev *dev, pm_message_t state) static int pciserial_txx9_resume_one(struct pci_dev *dev) { - int line = (int)(long)pci_get_drvdata(dev); + struct uart_txx9_port *up = pci_get_drvdata(dev); pci_set_power_state(dev, PCI_D0); pci_restore_state(dev); - - if (line) { - pci_enable_device(dev); - serial_txx9_resume_port(line); - } + if (up) + uart_resume_port(&serial_txx9_reg, &up->port); return 0; } #endif @@ -1161,6 +1223,8 @@ static struct pci_driver serial_txx9_pci_driver = { MODULE_DEVICE_TABLE(pci, serial_txx9_pci_tbl); #endif /* ENABLE_SERIAL_TXX9_PCI */ +static struct platform_device *serial_txx9_plat_devs; + static int __init serial_txx9_init(void) { int ret; @@ -1168,13 +1232,39 @@ static int __init serial_txx9_init(void) printk(KERN_INFO "%s version %s\n", serial_name, serial_version); ret = uart_register_driver(&serial_txx9_reg); - if (ret >= 0) { - serial_txx9_register_ports(&serial_txx9_reg); + if (ret) + goto out; + + serial_txx9_plat_devs = platform_device_alloc("serial_txx9", -1); + if (!serial_txx9_plat_devs) { + ret = -ENOMEM; + goto unreg_uart_drv; + } + + ret = platform_device_add(serial_txx9_plat_devs); + if (ret) + goto put_dev; + + serial_txx9_register_ports(&serial_txx9_reg, + &serial_txx9_plat_devs->dev); + + ret = platform_driver_register(&serial_txx9_plat_driver); + if (ret) + goto del_dev; #ifdef ENABLE_SERIAL_TXX9_PCI - ret = pci_register_driver(&serial_txx9_pci_driver); + ret = pci_register_driver(&serial_txx9_pci_driver); #endif - } + if (ret == 0) + goto out; + + del_dev: + platform_device_del(serial_txx9_plat_devs); + put_dev: + platform_device_put(serial_txx9_plat_devs); + unreg_uart_drv: + uart_unregister_driver(&serial_txx9_reg); + out: return ret; } @@ -1185,6 +1275,8 @@ static void __exit serial_txx9_exit(void) #ifdef ENABLE_SERIAL_TXX9_PCI pci_unregister_driver(&serial_txx9_pci_driver); #endif + platform_driver_unregister(&serial_txx9_plat_driver); + platform_device_unregister(serial_txx9_plat_devs); for (i = 0; i < UART_NR; i++) { struct uart_txx9_port *up = &serial_txx9_ports[i]; if (up->port.iobase || up->port.mapbase) |