summaryrefslogtreecommitdiffstats
path: root/drivers/scsi/cpqfcTSinit.c
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/scsi/cpqfcTSinit.c')
-rw-r--r--drivers/scsi/cpqfcTSinit.c2096
1 files changed, 0 insertions, 2096 deletions
diff --git a/drivers/scsi/cpqfcTSinit.c b/drivers/scsi/cpqfcTSinit.c
deleted file mode 100644
index 3fda8d455c5..00000000000
--- a/drivers/scsi/cpqfcTSinit.c
+++ /dev/null
@@ -1,2096 +0,0 @@
-/* Copyright(c) 2000, Compaq Computer Corporation
- * Fibre Channel Host Bus Adapter
- * 64-bit, 66MHz PCI
- * Originally developed and tested on:
- * (front): [chip] Tachyon TS HPFC-5166A/1.2 L2C1090 ...
- * SP# P225CXCBFIEL6T, Rev XC
- * SP# 161290-001, Rev XD
- * (back): Board No. 010008-001 A/W Rev X5, FAB REV X5
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License as published by the
- * Free Software Foundation; either version 2, or (at your option) any
- * later version.
- *
- * This program is distributed in the hope that it will be useful, but
- * WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
- * General Public License for more details.
- * Written by Don Zimmerman
- * IOCTL and procfs added by Jouke Numan
- * SMP testing by Chel Van Gennip
- *
- * portions copied from:
- * QLogic CPQFCTS SCSI-FCP
- * Written by Erik H. Moe, ehm@cris.com
- * Copyright 1995, Erik H. Moe
- * Renamed and updated to 1.3.x by Michael Griffith <grif@cs.ucr.edu>
- * Chris Loveland <cwl@iol.unh.edu> to support the isp2100 and isp2200
-*/
-
-
-#define LinuxVersionCode(v, p, s) (((v)<<16)+((p)<<8)+(s))
-
-#include <linux/config.h>
-#include <linux/interrupt.h>
-#include <linux/module.h>
-#include <linux/version.h>
-#include <linux/blkdev.h>
-#include <linux/kernel.h>
-#include <linux/string.h>
-#include <linux/types.h>
-#include <linux/pci.h>
-#include <linux/delay.h>
-#include <linux/timer.h>
-#include <linux/init.h>
-#include <linux/ioport.h> // request_region() prototype
-#include <linux/completion.h>
-
-#include <asm/io.h>
-#include <asm/uaccess.h> // ioctl related
-#include <asm/irq.h>
-#include <linux/spinlock.h>
-#include "scsi.h"
-#include <scsi/scsi_host.h>
-#include <scsi/scsi_ioctl.h>
-#include "cpqfcTSchip.h"
-#include "cpqfcTSstructs.h"
-#include "cpqfcTStrigger.h"
-
-#include "cpqfcTS.h"
-
-/* Embedded module documentation macros - see module.h */
-MODULE_AUTHOR("Compaq Computer Corporation");
-MODULE_DESCRIPTION("Driver for Compaq 64-bit/66Mhz PCI Fibre Channel HBA v. 2.5.4");
-MODULE_LICENSE("GPL");
-
-int cpqfcTS_TargetDeviceReset( Scsi_Device *ScsiDev, unsigned int reset_flags);
-
-// This struct was originally defined in
-// /usr/src/linux/include/linux/proc_fs.h
-// since it's only partially implemented, we only use first
-// few fields...
-// NOTE: proc_fs changes in 2.4 kernel
-
-#if LINUX_VERSION_CODE < LinuxVersionCode(2,3,27)
-static struct proc_dir_entry proc_scsi_cpqfcTS =
-{
- PROC_SCSI_CPQFCTS, // ushort low_ino (enumerated list)
- 7, // ushort namelen
- DEV_NAME, // const char* name
- S_IFDIR | S_IRUGO | S_IXUGO, // mode_t mode
- 2 // nlink_t nlink
- // etc. ...
-};
-
-
-#endif
-
-#if LINUX_VERSION_CODE >= LinuxVersionCode(2,4,7)
-# define CPQFC_DECLARE_COMPLETION(x) DECLARE_COMPLETION(x)
-# define CPQFC_WAITING waiting
-# define CPQFC_COMPLETE(x) complete(x)
-# define CPQFC_WAIT_FOR_COMPLETION(x) wait_for_completion(x);
-#else
-# define CPQFC_DECLARE_COMPLETION(x) DECLARE_MUTEX_LOCKED(x)
-# define CPQFC_WAITING sem
-# define CPQFC_COMPLETE(x) up(x)
-# define CPQFC_WAIT_FOR_COMPLETION(x) down(x)
-#endif
-
-static int cpqfc_alloc_private_data_pool(CPQFCHBA *hba);
-
-/* local function to load our per-HBA (local) data for chip
- registers, FC link state, all FC exchanges, etc.
-
- We allocate space and compute address offsets for the
- most frequently accessed addresses; others (like World Wide
- Name) are not necessary.
-*/
-static void Cpqfc_initHBAdata(CPQFCHBA *cpqfcHBAdata, struct pci_dev *PciDev )
-{
-
- cpqfcHBAdata->PciDev = PciDev; // copy PCI info ptr
-
- // since x86 port space is 64k, we only need the lower 16 bits
- cpqfcHBAdata->fcChip.Registers.IOBaseL =
- PciDev->resource[1].start & PCI_BASE_ADDRESS_IO_MASK;
-
- cpqfcHBAdata->fcChip.Registers.IOBaseU =
- PciDev->resource[2].start & PCI_BASE_ADDRESS_IO_MASK;
-
- // 32-bit memory addresses
- cpqfcHBAdata->fcChip.Registers.MemBase =
- PciDev->resource[3].start & PCI_BASE_ADDRESS_MEM_MASK;
-
- cpqfcHBAdata->fcChip.Registers.ReMapMemBase =
- ioremap( PciDev->resource[3].start & PCI_BASE_ADDRESS_MEM_MASK,
- 0x200);
-
- cpqfcHBAdata->fcChip.Registers.RAMBase =
- PciDev->resource[4].start;
-
- cpqfcHBAdata->fcChip.Registers.SROMBase = // NULL for HP TS adapter
- PciDev->resource[5].start;
-
- // now the Tachlite chip registers
- // the REGISTER struct holds both the physical address & last
- // written value (some TL registers are WRITE ONLY)
-
- cpqfcHBAdata->fcChip.Registers.SFQconsumerIndex.address =
- cpqfcHBAdata->fcChip.Registers.ReMapMemBase + TL_MEM_SFQ_CONSUMER_INDEX;
-
- cpqfcHBAdata->fcChip.Registers.ERQproducerIndex.address =
- cpqfcHBAdata->fcChip.Registers.ReMapMemBase + TL_MEM_ERQ_PRODUCER_INDEX;
-
- // TL Frame Manager
- cpqfcHBAdata->fcChip.Registers.FMconfig.address =
- cpqfcHBAdata->fcChip.Registers.ReMapMemBase + TL_MEM_FM_CONFIG;
- cpqfcHBAdata->fcChip.Registers.FMcontrol.address =
- cpqfcHBAdata->fcChip.Registers.ReMapMemBase + TL_MEM_FM_CONTROL;
- cpqfcHBAdata->fcChip.Registers.FMstatus.address =
- cpqfcHBAdata->fcChip.Registers.ReMapMemBase + TL_MEM_FM_STATUS;
- cpqfcHBAdata->fcChip.Registers.FMLinkStatus1.address =
- cpqfcHBAdata->fcChip.Registers.ReMapMemBase + TL_MEM_FM_LINK_STAT1;
- cpqfcHBAdata->fcChip.Registers.FMLinkStatus2.address =
- cpqfcHBAdata->fcChip.Registers.ReMapMemBase + TL_MEM_FM_LINK_STAT2;
- cpqfcHBAdata->fcChip.Registers.FMBB_CreditZero.address =
- cpqfcHBAdata->fcChip.Registers.ReMapMemBase + TL_MEM_FM_BB_CREDIT0;
-
- // TL Control Regs
- cpqfcHBAdata->fcChip.Registers.TYconfig.address =
- cpqfcHBAdata->fcChip.Registers.ReMapMemBase + TL_MEM_TACH_CONFIG;
- cpqfcHBAdata->fcChip.Registers.TYcontrol.address =
- cpqfcHBAdata->fcChip.Registers.ReMapMemBase + TL_MEM_TACH_CONTROL;
- cpqfcHBAdata->fcChip.Registers.TYstatus.address =
- cpqfcHBAdata->fcChip.Registers.ReMapMemBase + TL_MEM_TACH_STATUS;
- cpqfcHBAdata->fcChip.Registers.rcv_al_pa.address =
- cpqfcHBAdata->fcChip.Registers.ReMapMemBase + TL_MEM_FM_RCV_AL_PA;
- cpqfcHBAdata->fcChip.Registers.ed_tov.address =
- cpqfcHBAdata->fcChip.Registers.ReMapMemBase + TL_MEM_FM_ED_TOV;
-
-
- cpqfcHBAdata->fcChip.Registers.INTEN.address =
- cpqfcHBAdata->fcChip.Registers.ReMapMemBase + IINTEN;
- cpqfcHBAdata->fcChip.Registers.INTPEND.address =
- cpqfcHBAdata->fcChip.Registers.ReMapMemBase + IINTPEND;
- cpqfcHBAdata->fcChip.Registers.INTSTAT.address =
- cpqfcHBAdata->fcChip.Registers.ReMapMemBase + IINTSTAT;
-
- DEBUG_PCI(printk(" cpqfcHBAdata->fcChip.Registers. :\n"));
- DEBUG_PCI(printk(" IOBaseL = %x\n",
- cpqfcHBAdata->fcChip.Registers.IOBaseL));
- DEBUG_PCI(printk(" IOBaseU = %x\n",
- cpqfcHBAdata->fcChip.Registers.IOBaseU));
-
- /* printk(" ioremap'd Membase: %p\n", cpqfcHBAdata->fcChip.Registers.ReMapMemBase); */
-
- DEBUG_PCI(printk(" SFQconsumerIndex.address = %p\n",
- cpqfcHBAdata->fcChip.Registers.SFQconsumerIndex.address));
- DEBUG_PCI(printk(" ERQproducerIndex.address = %p\n",
- cpqfcHBAdata->fcChip.Registers.ERQproducerIndex.address));
- DEBUG_PCI(printk(" TYconfig.address = %p\n",
- cpqfcHBAdata->fcChip.Registers.TYconfig.address));
- DEBUG_PCI(printk(" FMconfig.address = %p\n",
- cpqfcHBAdata->fcChip.Registers.FMconfig.address));
- DEBUG_PCI(printk(" FMcontrol.address = %p\n",
- cpqfcHBAdata->fcChip.Registers.FMcontrol.address));
-
- // set default options for FC controller (chip)
- cpqfcHBAdata->fcChip.Options.initiator = 1; // default: SCSI initiator
- cpqfcHBAdata->fcChip.Options.target = 0; // default: SCSI target
- cpqfcHBAdata->fcChip.Options.extLoopback = 0;// default: no loopback @GBIC
- cpqfcHBAdata->fcChip.Options.intLoopback = 0;// default: no loopback inside chip
-
- // set highest and lowest FC-PH version the adapter/driver supports
- // (NOT strict compliance)
- cpqfcHBAdata->fcChip.highest_FCPH_ver = FC_PH3;
- cpqfcHBAdata->fcChip.lowest_FCPH_ver = FC_PH43;
-
- // set function points for this controller / adapter
- cpqfcHBAdata->fcChip.ResetTachyon = CpqTsResetTachLite;
- cpqfcHBAdata->fcChip.FreezeTachyon = CpqTsFreezeTachlite;
- cpqfcHBAdata->fcChip.UnFreezeTachyon = CpqTsUnFreezeTachlite;
- cpqfcHBAdata->fcChip.CreateTachyonQues = CpqTsCreateTachLiteQues;
- cpqfcHBAdata->fcChip.DestroyTachyonQues = CpqTsDestroyTachLiteQues;
- cpqfcHBAdata->fcChip.InitializeTachyon = CpqTsInitializeTachLite;
- cpqfcHBAdata->fcChip.LaserControl = CpqTsLaserControl;
- cpqfcHBAdata->fcChip.ProcessIMQEntry = CpqTsProcessIMQEntry;
- cpqfcHBAdata->fcChip.InitializeFrameManager = CpqTsInitializeFrameManager;
- cpqfcHBAdata->fcChip.ReadWriteWWN = CpqTsReadWriteWWN;
- cpqfcHBAdata->fcChip.ReadWriteNVRAM = CpqTsReadWriteNVRAM;
-
- if (cpqfc_alloc_private_data_pool(cpqfcHBAdata) != 0) {
- printk(KERN_WARNING
- "cpqfc: unable to allocate pool for passthru ioctls. "
- "Passthru ioctls disabled.\n");
- }
-}
-
-
-/* (borrowed from linux/drivers/scsi/hosts.c) */
-static void launch_FCworker_thread(struct Scsi_Host *HostAdapter)
-{
- DECLARE_MUTEX_LOCKED(sem);
-
- CPQFCHBA *cpqfcHBAdata = (CPQFCHBA *)HostAdapter->hostdata;
-
- ENTER("launch_FC_worker_thread");
-
- cpqfcHBAdata->notify_wt = &sem;
-
- /* must unlock before kernel_thread(), for it may cause a reschedule. */
- spin_unlock_irq(HostAdapter->host_lock);
- kernel_thread((int (*)(void *))cpqfcTSWorkerThread,
- (void *) HostAdapter, 0);
- /*
- * Now wait for the kernel error thread to initialize itself
-
- */
- down (&sem);
- spin_lock_irq(HostAdapter->host_lock);
- cpqfcHBAdata->notify_wt = NULL;
-
- LEAVE("launch_FC_worker_thread");
-
-}
-
-
-/* "Entry" point to discover if any supported PCI
- bus adapter can be found
-*/
-/* We're supporting:
- * Compaq 64-bit, 66MHz HBA with Tachyon TS
- * Agilent XL2
- * HP Tachyon
- */
-#define HBA_TYPES 3
-
-#ifndef PCI_DEVICE_ID_COMPAQ_
-#define PCI_DEVICE_ID_COMPAQ_TACHYON 0xa0fc
-#endif
-
-static struct SupportedPCIcards cpqfc_boards[] __initdata = {
- {PCI_VENDOR_ID_COMPAQ, PCI_DEVICE_ID_COMPAQ_TACHYON},
- {PCI_VENDOR_ID_HP, PCI_DEVICE_ID_HP_TACHLITE},
- {PCI_VENDOR_ID_HP, PCI_DEVICE_ID_HP_TACHYON},
-};
-
-
-int cpqfcTS_detect(Scsi_Host_Template *ScsiHostTemplate)
-{
- int NumberOfAdapters=0; // how many of our PCI adapters are found?
- struct pci_dev *PciDev = NULL;
- struct Scsi_Host *HostAdapter = NULL;
- CPQFCHBA *cpqfcHBAdata = NULL;
- struct timer_list *cpqfcTStimer = NULL;
- int i;
-
- ENTER("cpqfcTS_detect");
-
-#if LINUX_VERSION_CODE < LinuxVersionCode(2,3,27)
- ScsiHostTemplate->proc_dir = &proc_scsi_cpqfcTS;
-#else
- ScsiHostTemplate->proc_name = "cpqfcTS";
-#endif
-
- for( i=0; i < HBA_TYPES; i++)
- {
- // look for all HBAs of each type
-
- while((PciDev = pci_find_device(cpqfc_boards[i].vendor_id,
- cpqfc_boards[i].device_id, PciDev)))
- {
-
- if (pci_enable_device(PciDev)) {
- printk(KERN_ERR
- "cpqfc: can't enable PCI device at %s\n", pci_name(PciDev));
- goto err_continue;
- }
-
- if (pci_set_dma_mask(PciDev, CPQFCTS_DMA_MASK) != 0) {
- printk(KERN_WARNING
- "cpqfc: HBA cannot support required DMA mask, skipping.\n");
- goto err_disable_dev;
- }
-
- // NOTE: (kernel 2.2.12-32) limits allocation to 128k bytes...
- /* printk(" scsi_register allocating %d bytes for FC HBA\n",
- (ULONG)sizeof(CPQFCHBA)); */
-
- HostAdapter = scsi_register( ScsiHostTemplate, sizeof( CPQFCHBA ) );
-
- if(HostAdapter == NULL) {
- printk(KERN_WARNING
- "cpqfc: can't register SCSI HBA, skipping.\n");
- goto err_disable_dev;
- }
- DEBUG_PCI( printk(" HBA found!\n"));
- DEBUG_PCI( printk(" HostAdapter->PciDev->irq = %u\n", PciDev->irq) );
- DEBUG_PCI(printk(" PciDev->baseaddress[0]= %lx\n",
- PciDev->resource[0].start));
- DEBUG_PCI(printk(" PciDev->baseaddress[1]= %lx\n",
- PciDev->resource[1].start));
- DEBUG_PCI(printk(" PciDev->baseaddress[2]= %lx\n",
- PciDev->resource[2].start));
- DEBUG_PCI(printk(" PciDev->baseaddress[3]= %lx\n",
- PciDev->resource[3].start));
-
- HostAdapter->irq = PciDev->irq; // copy for Scsi layers
-
- // HP Tachlite uses two (255-byte) ranges of Port I/O (lower & upper),
- // for a total I/O port address space of 512 bytes.
- // mask out the I/O port address (lower) & record
- HostAdapter->io_port = (unsigned int)
- PciDev->resource[1].start & PCI_BASE_ADDRESS_IO_MASK;
- HostAdapter->n_io_port = 0xff;
-
- // i.e., expect 128 targets (arbitrary number), while the
- // RA-4000 supports 32 LUNs
- HostAdapter->max_id = 0; // incremented as devices log in
- HostAdapter->max_lun = CPQFCTS_MAX_LUN; // LUNs per FC device
- HostAdapter->max_channel = CPQFCTS_MAX_CHANNEL; // multiple busses?
-
- // get the pointer to our HBA specific data... (one for
- // each HBA on the PCI bus(ses)).
- cpqfcHBAdata = (CPQFCHBA *)HostAdapter->hostdata;
-
- // make certain our data struct is clear
- memset( cpqfcHBAdata, 0, sizeof( CPQFCHBA ) );
-
-
- // initialize our HBA info
- cpqfcHBAdata->HBAnum = NumberOfAdapters;
-
- cpqfcHBAdata->HostAdapter = HostAdapter; // back ptr
- Cpqfc_initHBAdata( cpqfcHBAdata, PciDev ); // fill MOST fields
-
- cpqfcHBAdata->HBAnum = NumberOfAdapters;
- spin_lock_init(&cpqfcHBAdata->hba_spinlock);
-
- // request necessary resources and check for conflicts
- if( request_irq( HostAdapter->irq,
- cpqfcTS_intr_handler,
- SA_INTERRUPT | SA_SHIRQ,
- DEV_NAME,
- HostAdapter) )
- {
- printk(KERN_WARNING "cpqfc: IRQ %u already used\n", HostAdapter->irq);
- goto err_unregister;
- }
-
- // Since we have two 256-byte I/O port ranges (upper
- // and lower), check them both
- if( !request_region( cpqfcHBAdata->fcChip.Registers.IOBaseU,
- 0xff, DEV_NAME ) )
- {
- printk(KERN_WARNING "cpqfc: address in use: %x\n",
- cpqfcHBAdata->fcChip.Registers.IOBaseU);
- goto err_free_irq;
- }
-
- if( !request_region( cpqfcHBAdata->fcChip.Registers.IOBaseL,
- 0xff, DEV_NAME ) )
- {
- printk(KERN_WARNING "cpqfc: address in use: %x\n",
- cpqfcHBAdata->fcChip.Registers.IOBaseL);
- goto err_release_region_U;
- }
-
- // OK, we have grabbed everything we need now.
- DEBUG_PCI(printk(" Reserved 255 I/O addresses @ %x\n",
- cpqfcHBAdata->fcChip.Registers.IOBaseL ));
- DEBUG_PCI(printk(" Reserved 255 I/O addresses @ %x\n",
- cpqfcHBAdata->fcChip.Registers.IOBaseU ));
-
-
-
- // start our kernel worker thread
-
- spin_lock_irq(HostAdapter->host_lock);
- launch_FCworker_thread(HostAdapter);
-
-
- // start our TimerTask...
-
- cpqfcTStimer = &cpqfcHBAdata->cpqfcTStimer;
-
- init_timer( cpqfcTStimer); // Linux clears next/prev values
- cpqfcTStimer->expires = jiffies + HZ; // one second
- cpqfcTStimer->data = (unsigned long)cpqfcHBAdata; // this adapter
- cpqfcTStimer->function = cpqfcTSheartbeat; // handles timeouts, housekeeping
-
- add_timer( cpqfcTStimer); // give it to Linux
-
-
- // now initialize our hardware...
- if (cpqfcHBAdata->fcChip.InitializeTachyon( cpqfcHBAdata, 1,1)) {
- printk(KERN_WARNING "cpqfc: initialization of HBA hardware failed.\n");
- goto err_release_region_L;
- }
-
- cpqfcHBAdata->fcStatsTime = jiffies; // (for FC Statistics delta)
-
- // give our HBA time to initialize and login current devices...
- {
- // The Brocade switch (e.g. 2400, 2010, etc.) as of March 2000,
- // has the following algorithm for FL_Port startup:
- // Time(sec) Action
- // 0: Device Plugin and LIP(F7,F7) transmission
- // 1.0 LIP incoming
- // 1.027 LISA incoming, no CLS! (link not up)
- // 1.028 NOS incoming (switch test for N_Port)
- // 1.577 ED_TOV expired, transmit LIPs again
- // 3.0 LIP(F8,F7) incoming (switch passes Tach Prim.Sig)
- // 3.028 LILP received, link up, FLOGI starts
- // slowest(worst) case, measured on 1Gb Finisar GT analyzer
-
- unsigned long stop_time;
-
- spin_unlock_irq(HostAdapter->host_lock);
- stop_time = jiffies + 4*HZ;
- while ( time_before(jiffies, stop_time) )
- schedule(); // (our worker task needs to run)
-
- }
-
- spin_lock_irq(HostAdapter->host_lock);
- NumberOfAdapters++;
- spin_unlock_irq(HostAdapter->host_lock);
-
- continue;
-
-err_release_region_L:
- release_region( cpqfcHBAdata->fcChip.Registers.IOBaseL, 0xff );
-err_release_region_U:
- release_region( cpqfcHBAdata->fcChip.Registers.IOBaseU, 0xff );
-err_free_irq:
- free_irq( HostAdapter->irq, HostAdapter);
-err_unregister:
- scsi_unregister( HostAdapter);
-err_disable_dev:
- pci_disable_device( PciDev );
-err_continue:
- continue;
- } // end of while()
- }
-
- LEAVE("cpqfcTS_detect");
-
- return NumberOfAdapters;
-}
-
-#ifdef SUPPORT_RESET
-static void my_ioctl_done (Scsi_Cmnd * SCpnt)
-{
- struct request * req;
-
- req = SCpnt->request;
- req->rq_status = RQ_SCSI_DONE; /* Busy, but indicate request done */
-
- if (req->CPQFC_WAITING != NULL)
- CPQFC_COMPLETE(req->CPQFC_WAITING);
-}
-#endif
-
-static int cpqfc_alloc_private_data_pool(CPQFCHBA *hba)
-{
- hba->private_data_bits = NULL;
- hba->private_data_pool = NULL;
- hba->private_data_bits =
- kmalloc(((CPQFC_MAX_PASSTHRU_CMDS+BITS_PER_LONG-1) /
- BITS_PER_LONG)*sizeof(unsigned long),
- GFP_KERNEL);
- if (hba->private_data_bits == NULL)
- return -1;
- memset(hba->private_data_bits, 0,
- ((CPQFC_MAX_PASSTHRU_CMDS+BITS_PER_LONG-1) /
- BITS_PER_LONG)*sizeof(unsigned long));
- hba->private_data_pool = kmalloc(sizeof(cpqfc_passthru_private_t) *
- CPQFC_MAX_PASSTHRU_CMDS, GFP_KERNEL);
- if (hba->private_data_pool == NULL) {
- kfree(hba->private_data_bits);
- hba->private_data_bits = NULL;
- return -1;
- }
- return 0;
-}
-
-static void cpqfc_free_private_data_pool(CPQFCHBA *hba)
-{
- kfree(hba->private_data_bits);
- kfree(hba->private_data_pool);
-}
-
-int is_private_data_of_cpqfc(CPQFCHBA *hba, void *pointer)
-{
- /* Is pointer within our private data pool?
- We use Scsi_Request->upper_private_data (normally
- reserved for upper layer drivers, e.g. the sg driver)
- We check to see if the pointer is ours by looking at
- its address. Is this ok? Hmm, it occurs to me that
- a user app might do something bad by using sg to send
- a cpqfc passthrough ioctl with upper_data_private
- forged to be somewhere in our pool..., though they'd
- normally have to be root already to do this. */
-
- return (pointer != NULL &&
- pointer >= (void *) hba->private_data_pool &&
- pointer < (void *) hba->private_data_pool +
- sizeof(*hba->private_data_pool) *
- CPQFC_MAX_PASSTHRU_CMDS);
-}
-
-cpqfc_passthru_private_t *cpqfc_alloc_private_data(CPQFCHBA *hba)
-{
- int i;
-
- do {
- i = find_first_zero_bit(hba->private_data_bits,
- CPQFC_MAX_PASSTHRU_CMDS);
- if (i == CPQFC_MAX_PASSTHRU_CMDS)
- return NULL;
- } while ( test_and_set_bit(i & (BITS_PER_LONG - 1),
- hba->private_data_bits+(i/BITS_PER_LONG)) != 0);
- return &hba->private_data_pool[i];
-}
-
-void cpqfc_free_private_data(CPQFCHBA *hba, cpqfc_passthru_private_t *data)
-{
- int i;
- i = data - hba->private_data_pool;
- clear_bit(i&(BITS_PER_LONG-1),
- hba->private_data_bits+(i/BITS_PER_LONG));
-}
-
-int cpqfcTS_ioctl( struct scsi_device *ScsiDev, int Cmnd, void *arg)
-{
- int result = 0;
- struct Scsi_Host *HostAdapter = ScsiDev->host;
- CPQFCHBA *cpqfcHBAdata = (CPQFCHBA *)HostAdapter->hostdata;
- PTACHYON fcChip = &cpqfcHBAdata->fcChip;
- PFC_LOGGEDIN_PORT pLoggedInPort = NULL;
- struct scsi_cmnd *DumCmnd;
- int i, j;
- VENDOR_IOCTL_REQ ioc;
- cpqfc_passthru_t *vendor_cmd;
- Scsi_Device *SDpnt;
- Scsi_Request *ScsiPassThruReq;
- cpqfc_passthru_private_t *privatedata;
-
- ENTER("cpqfcTS_ioctl ");
-
- // printk("ioctl CMND %d", Cmnd);
- switch (Cmnd) {
- // Passthrough provides a mechanism to bypass the RAID
- // or other controller and talk directly to the devices
- // (e.g. physical disk drive)
- // Passthrough commands, unfortunately, tend to be vendor
- // specific; this is tailored to COMPAQ's RAID (RA4x00)
- case CPQFCTS_SCSI_PASSTHRU:
- {
- void *buf = NULL; // for kernel space buffer for user data
-
- /* Check that our pool got allocated ok. */
- if (cpqfcHBAdata->private_data_pool == NULL)
- return -ENOMEM;
-
- if( !arg)
- return -EINVAL;
-
- // must be super user to send stuff directly to the
- // controller and/or physical drives...
- if( !capable(CAP_SYS_RAWIO) )
- return -EPERM;
-
- // copy the caller's struct to our space.
- if( copy_from_user( &ioc, arg, sizeof( VENDOR_IOCTL_REQ)))
- return( -EFAULT);
-
- vendor_cmd = ioc.argp; // i.e., CPQ specific command struct
-
- // If necessary, grab a kernel/DMA buffer
- if( vendor_cmd->len)
- {
- buf = kmalloc( vendor_cmd->len, GFP_KERNEL);
- if( !buf)
- return -ENOMEM;
- }
- // Now build a Scsi_Request to pass down...
- ScsiPassThruReq = scsi_allocate_request(ScsiDev, GFP_KERNEL);
- if (ScsiPassThruReq == NULL) {
- kfree(buf);
- return -ENOMEM;
- }
- ScsiPassThruReq->upper_private_data =
- cpqfc_alloc_private_data(cpqfcHBAdata);
- if (ScsiPassThruReq->upper_private_data == NULL) {
- kfree(buf);
- scsi_release_request(ScsiPassThruReq); // "de-allocate"
- return -ENOMEM;
- }
-
- if (vendor_cmd->rw_flag == VENDOR_WRITE_OPCODE) {
- if (vendor_cmd->len) { // Need data from user?
- if (copy_from_user(buf, vendor_cmd->bufp,
- vendor_cmd->len)) {
- kfree(buf);
- cpqfc_free_private_data(cpqfcHBAdata,
- ScsiPassThruReq->upper_private_data);
- scsi_release_request(ScsiPassThruReq);
- return( -EFAULT);
- }
- }
- ScsiPassThruReq->sr_data_direction = DMA_TO_DEVICE;
- } else if (vendor_cmd->rw_flag == VENDOR_READ_OPCODE) {
- ScsiPassThruReq->sr_data_direction = DMA_FROM_DEVICE;
- } else
- // maybe this means a bug in the user app
- ScsiPassThruReq->sr_data_direction = DMA_BIDIRECTIONAL;
-
- ScsiPassThruReq->sr_cmd_len = 0; // set correctly by scsi_do_req()
- ScsiPassThruReq->sr_sense_buffer[0] = 0;
- ScsiPassThruReq->sr_sense_buffer[2] = 0;
-
- // We copy the scheme used by sd.c:spinup_disk() to submit commands
- // to our own HBA. We do this in order to stall the
- // thread calling the IOCTL until it completes, and use
- // the same "_quecommand" function for synchronizing
- // FC Link events with our "worker thread".
-
- privatedata = ScsiPassThruReq->upper_private_data;
- privatedata->bus = vendor_cmd->bus;
- privatedata->pdrive = vendor_cmd->pdrive;
-
- // eventually gets us to our own _quecommand routine
- scsi_wait_req(ScsiPassThruReq,
- &vendor_cmd->cdb[0], buf, vendor_cmd->len,
- 10*HZ, // timeout
- 1); // retries
- result = ScsiPassThruReq->sr_result;
-
- // copy any sense data back to caller
- if( result != 0 )
- {
- memcpy( vendor_cmd->sense_data, // see struct def - size=40
- ScsiPassThruReq->sr_sense_buffer,
- sizeof(ScsiPassThruReq->sr_sense_buffer) <
- sizeof(vendor_cmd->sense_data) ?
- sizeof(ScsiPassThruReq->sr_sense_buffer) :
- sizeof(vendor_cmd->sense_data)
- );
- }
- SDpnt = ScsiPassThruReq->sr_device;
- /* upper_private_data is already freed in call_scsi_done() */
- scsi_release_request(ScsiPassThruReq); // "de-allocate"
- ScsiPassThruReq = NULL;
-
- // need to pass data back to user (space)?
- if( (vendor_cmd->rw_flag == VENDOR_READ_OPCODE) &&
- vendor_cmd->len )
- if( copy_to_user( vendor_cmd->bufp, buf, vendor_cmd->len))
- result = -EFAULT;
-
- kfree(buf);
-
- return result;
- }
-
- case CPQFCTS_GETPCIINFO:
- {
- cpqfc_pci_info_struct pciinfo;
-
- if( !arg)
- return -EINVAL;
-
-
-
- pciinfo.bus = cpqfcHBAdata->PciDev->bus->number;
- pciinfo.dev_fn = cpqfcHBAdata->PciDev->devfn;
- pciinfo.board_id = cpqfcHBAdata->PciDev->device |
- (cpqfcHBAdata->PciDev->vendor <<16);
-
- if(copy_to_user( arg, &pciinfo, sizeof(cpqfc_pci_info_struct)))
- return( -EFAULT);
- return 0;
- }
-
- case CPQFCTS_GETDRIVVER:
- {
- DriverVer_type DriverVer =
- CPQFCTS_DRIVER_VER( VER_MAJOR,VER_MINOR,VER_SUBMINOR);
-
- if( !arg)
- return -EINVAL;
-
- if(copy_to_user( arg, &DriverVer, sizeof(DriverVer)))
- return( -EFAULT);
- return 0;
- }
-
-
-
- case CPQFC_IOCTL_FC_TARGET_ADDRESS:
- // can we find an FC device mapping to this SCSI target?
-/* DumCmnd.channel = ScsiDev->channel; */ // For searching
-/* DumCmnd.target = ScsiDev->id; */
-/* DumCmnd.lun = ScsiDev->lun; */
-
- DumCmnd = scsi_get_command (ScsiDev, GFP_KERNEL);
- if (!DumCmnd)
- return -ENOMEM;
-
- pLoggedInPort = fcFindLoggedInPort( fcChip,
- DumCmnd, // search Scsi Nexus
- 0, // DON'T search linked list for FC port id
- NULL, // DON'T search linked list for FC WWN
- NULL); // DON'T care about end of list
- scsi_put_command (DumCmnd);
- if (pLoggedInPort == NULL) {
- result = -ENXIO;
- break;
- }
- result = access_ok(VERIFY_WRITE, arg, sizeof(Scsi_FCTargAddress)) ? 0 : -EFAULT;
- if (result) break;
-
- put_user(pLoggedInPort->port_id,
- &((Scsi_FCTargAddress *) arg)->host_port_id);
-
- for( i=3,j=0; i>=0; i--) // copy the LOGIN port's WWN
- put_user(pLoggedInPort->u.ucWWN[i],
- &((Scsi_FCTargAddress *) arg)->host_wwn[j++]);
- for( i=7; i>3; i--) // copy the LOGIN port's WWN
- put_user(pLoggedInPort->u.ucWWN[i],
- &((Scsi_FCTargAddress *) arg)->host_wwn[j++]);
- break;
-
-
- case CPQFC_IOCTL_FC_TDR:
-
- result = cpqfcTS_TargetDeviceReset( ScsiDev, 0);
-
- break;
-
-
-
-
- default:
- result = -EINVAL;
- break;
- }
-
- LEAVE("cpqfcTS_ioctl");
- return result;
-}
-
-
-/* "Release" the Host Bus Adapter...
- disable interrupts, stop the HBA, release the interrupt,
- and free all resources */
-
-int cpqfcTS_release(struct Scsi_Host *HostAdapter)
-{
- CPQFCHBA *cpqfcHBAdata = (CPQFCHBA *)HostAdapter->hostdata;
-
-
- ENTER("cpqfcTS_release");
-
- DEBUG_PCI( printk(" cpqfcTS: delete timer...\n"));
- del_timer( &cpqfcHBAdata->cpqfcTStimer);
-
- // disable the hardware...
- DEBUG_PCI( printk(" disable hardware, destroy queues, free mem\n"));
- cpqfcHBAdata->fcChip.ResetTachyon( cpqfcHBAdata, CLEAR_FCPORTS);
-
- // kill kernel thread
- if( cpqfcHBAdata->worker_thread ) // (only if exists)
- {
- DECLARE_MUTEX_LOCKED(sem); // synchronize thread kill
-
- cpqfcHBAdata->notify_wt = &sem;
- DEBUG_PCI( printk(" killing kernel thread\n"));
- send_sig( SIGKILL, cpqfcHBAdata->worker_thread, 1);
- down( &sem);
- cpqfcHBAdata->notify_wt = NULL;
-
- }
-
- cpqfc_free_private_data_pool(cpqfcHBAdata);
- // free Linux resources
- DEBUG_PCI( printk(" cpqfcTS: freeing resources...\n"));
- free_irq( HostAdapter->irq, HostAdapter);
- scsi_unregister( HostAdapter);
- release_region( cpqfcHBAdata->fcChip.Registers.IOBaseL, 0xff);
- release_region( cpqfcHBAdata->fcChip.Registers.IOBaseU, 0xff);
- /* we get "vfree: bad address" executing this - need to investigate...
- if( (void*)((unsigned long)cpqfcHBAdata->fcChip.Registers.MemBase) !=
- cpqfcHBAdata->fcChip.Registers.ReMapMemBase)
- vfree( cpqfcHBAdata->fcChip.Registers.ReMapMemBase);
-*/
- pci_disable_device( cpqfcHBAdata->PciDev);
-
- LEAVE("cpqfcTS_release");
- return 0;
-}
-
-
-const char * cpqfcTS_info(struct Scsi_Host *HostAdapter)
-{
- static char buf[300];
- CPQFCHBA *cpqfcHBA;
- int BusSpeed, BusWidth;
-
- // get the pointer to our Scsi layer HBA buffer
- cpqfcHBA = (CPQFCHBA *)HostAdapter->hostdata;
-
- BusWidth = (cpqfcHBA->fcChip.Registers.PCIMCTR &0x4) > 0 ?
- 64 : 32;
-
- if( cpqfcHBA->fcChip.Registers.TYconfig.value & 0x80000000)
- BusSpeed = 66;
- else
- BusSpeed = 33;
-
- sprintf(buf,
-"%s: WWN %08X%08X\n on PCI bus %d device 0x%02x irq %d IObaseL 0x%x, MEMBASE 0x%x\nPCI bus width %d bits, bus speed %d MHz\nFCP-SCSI Driver v%d.%d.%d",
- cpqfcHBA->fcChip.Name,
- cpqfcHBA->fcChip.Registers.wwn_hi,
- cpqfcHBA->fcChip.Registers.wwn_lo,
- cpqfcHBA->PciDev->bus->number,
- cpqfcHBA->PciDev->device,
- HostAdapter->irq,
- cpqfcHBA->fcChip.Registers.IOBaseL,
- cpqfcHBA->fcChip.Registers.MemBase,
- BusWidth,
- BusSpeed,
- VER_MAJOR, VER_MINOR, VER_SUBMINOR
-);
-
-
- cpqfcTSDecodeGBICtype( &cpqfcHBA->fcChip, &buf[ strlen(buf)]);
- cpqfcTSGetLPSM( &cpqfcHBA->fcChip, &buf[ strlen(buf)]);
- return buf;
-}
-
-//
-// /proc/scsi support. The following routines allow us to do 'normal'
-// sprintf like calls to return the currently requested piece (buflenght
-// chars, starting at bufoffset) of the file. Although procfs allows for
-// a 1 Kb bytes overflow after te supplied buffer, I consider it bad
-// programming to use it to make programming a little simpler. This piece
-// of coding is borrowed from ncr53c8xx.c with some modifications
-//
-struct info_str
-{
- char *buffer; // Pointer to output buffer
- int buflength; // It's length
- int bufoffset; // File offset corresponding with buf[0]
- int buffillen; // Current filled length
- int filpos; // Current file offset
-};
-
-static void copy_mem_info(struct info_str *info, char *data, int datalen)
-{
-
- if (info->filpos < info->bufoffset) { // Current offset before buffer offset
- if (info->filpos + datalen <= info->bufoffset) {
- info->filpos += datalen; // Discard if completely before buffer
- return;
- } else { // Partial copy, set to begin
- data += (info->bufoffset - info->filpos);
- datalen -= (info->bufoffset - info->filpos);
- info->filpos = info->bufoffset;
- }
- }
-
- info->filpos += datalen; // Update current offset
-
- if (info->buffillen == info->buflength) // Buffer full, discard
- return;
-
- if (info->buflength - info->buffillen < datalen) // Overflows buffer ?
- datalen = info->buflength - info->buffillen;
-
- memcpy(info->buffer + info->buffillen, data, datalen);
- info->buffillen += datalen;
-}
-
-static int copy_info(struct info_str *info, char *fmt, ...)
-{
- va_list args;
- char buf[400];
- int len;
-
- va_start(args, fmt);
- len = vsprintf(buf, fmt, args);
- va_end(args);
-
- copy_mem_info(info, buf, len);
- return len;
-}
-
-
-// Routine to get data for /proc RAM filesystem
-//
-int cpqfcTS_proc_info (struct Scsi_Host *host, char *buffer, char **start, off_t offset, int length,
- int inout)
-{
- struct scsi_cmnd *DumCmnd;
- struct scsi_device *ScsiDev;
- int Chan, Targ, i;
- struct info_str info;
- CPQFCHBA *cpqfcHBA;
- PTACHYON fcChip;
- PFC_LOGGEDIN_PORT pLoggedInPort;
- char buf[81];
-
- if (inout) return -EINVAL;
-
- // get the pointer to our Scsi layer HBA buffer
- cpqfcHBA = (CPQFCHBA *)host->hostdata;
- fcChip = &cpqfcHBA->fcChip;
-
- *start = buffer;
-
- info.buffer = buffer;
- info.buflength = length;
- info.bufoffset = offset;
- info.filpos = 0;
- info.buffillen = 0;
- copy_info(&info, "Driver version = %d.%d.%d", VER_MAJOR, VER_MINOR, VER_SUBMINOR);
- cpqfcTSDecodeGBICtype( &cpqfcHBA->fcChip, &buf[0]);
- cpqfcTSGetLPSM( &cpqfcHBA->fcChip, &buf[ strlen(buf)]);
- copy_info(&info, "%s\n", buf);
-
-#define DISPLAY_WWN_INFO
-#ifdef DISPLAY_WWN_INFO
- ScsiDev = scsi_get_host_dev (host);
- if (!ScsiDev)
- return -ENOMEM;
- DumCmnd = scsi_get_command (ScsiDev, GFP_KERNEL);
- if (!DumCmnd) {
- scsi_free_host_dev (ScsiDev);
- return -ENOMEM;
- }
- copy_info(&info, "WWN database: (\"port_id: 000000\" means disconnected)\n");
- for ( Chan=0; Chan <= host->max_channel; Chan++) {
- DumCmnd->device->channel = Chan;
- for (Targ=0; Targ <= host->max_id; Targ++) {
- DumCmnd->device->id = Targ;
- if ((pLoggedInPort = fcFindLoggedInPort( fcChip,
- DumCmnd, // search Scsi Nexus
- 0, // DON'T search list for FC port id
- NULL, // DON'T search list for FC WWN
- NULL))){ // DON'T care about end of list
- copy_info(&info, "Host: scsi%d Channel: %02d TargetId: %02d -> WWN: ",
- host->host_no, Chan, Targ);
- for( i=3; i>=0; i--) // copy the LOGIN port's WWN
- copy_info(&info, "%02X", pLoggedInPort->u.ucWWN[i]);
- for( i=7; i>3; i--) // copy the LOGIN port's WWN
- copy_info(&info, "%02X", pLoggedInPort->u.ucWWN[i]);
- copy_info(&info, " port_id: %06X\n", pLoggedInPort->port_id);
- }
- }
- }
-
- scsi_put_command (DumCmnd);
- scsi_free_host_dev (ScsiDev);
-#endif
-
-
-
-
-
-// Unfortunately, the proc_info buffer isn't big enough
-// for everything we would like...
-// For FC stats, compile this and turn off WWN stuff above
-//#define DISPLAY_FC_STATS
-#ifdef DISPLAY_FC_STATS
-// get the Fibre Channel statistics
- {
- int DeltaSecs = (jiffies - cpqfcHBA->fcStatsTime) / HZ;
- int days,hours,minutes,secs;
-
- days = DeltaSecs / (3600*24); // days
- hours = (DeltaSecs% (3600*24)) / 3600; // hours
- minutes = (DeltaSecs%3600 /60); // minutes
- secs = DeltaSecs%60; // secs
-copy_info( &info, "Fibre Channel Stats (time dd:hh:mm:ss %02u:%02u:%02u:%02u\n",
- days, hours, minutes, secs);
- }
-
- cpqfcHBA->fcStatsTime = jiffies; // (for next delta)
-
- copy_info( &info, " LinkUp %9u LinkDown %u\n",
- fcChip->fcStats.linkUp, fcChip->fcStats.linkDown);
-
- copy_info( &info, " Loss of Signal %9u Loss of Sync %u\n",
- fcChip->fcStats.LossofSignal, fcChip->fcStats.LossofSync);
-
- copy_info( &info, " Discarded Frames %9u Bad CRC Frame %u\n",
- fcChip->fcStats.Dis_Frm, fcChip->fcStats.Bad_CRC);
-
- copy_info( &info, " TACH LinkFailTX %9u TACH LinkFailRX %u\n",
- fcChip->fcStats.linkFailTX, fcChip->fcStats.linkFailRX);
-
- copy_info( &info, " TACH RxEOFa %9u TACH Elastic Store %u\n",
- fcChip->fcStats.Rx_EOFa, fcChip->fcStats.e_stores);
-
- copy_info( &info, " BufferCreditWait %9uus TACH FM Inits %u\n",
- fcChip->fcStats.BB0_Timer*10, fcChip->fcStats.FMinits );
-
- copy_info( &info, " FC-2 Timeouts %9u FC-2 Logouts %u\n",
- fcChip->fcStats.timeouts, fcChip->fcStats.logouts);
-
- copy_info( &info, " FC-2 Aborts %9u FC-4 Aborts %u\n",
- fcChip->fcStats.FC2aborted, fcChip->fcStats.FC4aborted);
-
- // clear the counters
- cpqfcTSClearLinkStatusCounters( fcChip);
-#endif
-
- return info.buffillen;
-}
-
-
-#if DEBUG_CMND
-
-UCHAR *ScsiToAscii( UCHAR ScsiCommand)
-{
-
-/*++
-
-Routine Description:
-
- Converts a SCSI command to a text string for debugging purposes.
-
-
-Arguments:
-
- ScsiCommand -- hex value SCSI Command
-
-
-Return Value:
-
- An ASCII, null-terminated string if found, else returns NULL.
-
-Original code from M. McGowen, Compaq
---*/
-
-
- switch (ScsiCommand)
- {
- case 0x00:
- return( "Test Unit Ready" );
-
- case 0x01:
- return( "Rezero Unit or Rewind" );
-
- case 0x02:
- return( "Request Block Address" );
-
- case 0x03:
- return( "Requese Sense" );
-
- case 0x04:
- return( "Format Unit" );
-
- case 0x05:
- return( "Read Block Limits" );
-
- case 0x07:
- return( "Reassign Blocks" );
-
- case 0x08:
- return( "Read (6)" );
-
- case 0x0a:
- return( "Write (6)" );
-
- case 0x0b:
- return( "Seek (6)" );
-
- case 0x12:
- return( "Inquiry" );
-
- case 0x15:
- return( "Mode Select (6)" );
-
- case 0x16:
- return( "Reserve" );
-
- case 0x17:
- return( "Release" );
-
- case 0x1a:
- return( "ModeSen(6)" );
-
- case 0x1b:
- return( "Start/Stop Unit" );
-
- case 0x1c:
- return( "Receive Diagnostic Results" );
-
- case 0x1d:
- return( "Send Diagnostic" );
-
- case 0x25:
- return( "Read Capacity" );
-
- case 0x28:
- return( "Read (10)" );
-
- case 0x2a:
- return( "Write (10)" );
-
- case 0x2b:
- return( "Seek (10)" );
-
- case 0x2e:
- return( "Write and Verify" );
-
- case 0x2f:
- return( "Verify" );
-
- case 0x34:
- return( "Pre-Fetch" );
-
- case 0x35:
- return( "Synchronize Cache" );
-
- case 0x37:
- return( "Read Defect Data (10)" );
-
- case 0x3b:
- return( "Write Buffer" );
-
- case 0x3c:
- return( "Read Buffer" );
-
- case 0x3e:
- return( "Read Long" );
-
- case 0x3f:
- return( "Write Long" );
-
- case 0x41:
- return( "Write Same" );
-
- case 0x4c:
- return( "Log Select" );
-
- case 0x4d:
- return( "Log Sense" );
-
- case 0x56:
- return( "Reserve (10)" );
-
- case 0x57:
- return( "Release (10)" );
-
- case 0xa0:
- return( "ReportLuns" );
-
- case 0xb7:
- return( "Read Defect Data (12)" );
-
- case 0xca:
- return( "Peripheral Device Addressing SCSI Passthrough" );
-
- case 0xcb:
- return( "Compaq Array Firmware Passthrough" );
-
- default:
- return( NULL );
- }
-
-} // end ScsiToAscii()
-
-void cpqfcTS_print_scsi_cmd(Scsi_Cmnd * cmd)
-{
-
-printk("cpqfcTS: (%s) chnl 0x%02x, trgt = 0x%02x, lun = 0x%02x, cmd_len = 0x%02x\n",
- ScsiToAscii( cmd->cmnd[0]), cmd->channel, cmd->target, cmd->lun, cmd->cmd_len);
-
-if( cmd->cmnd[0] == 0) // Test Unit Ready?
-{
- int i;
-
- printk("Cmnd->request_bufflen = 0x%X, ->use_sg = %d, ->bufflen = %d\n",
- cmd->request_bufflen, cmd->use_sg, cmd->bufflen);
- printk("Cmnd->request_buffer = %p, ->sglist_len = %d, ->buffer = %p\n",
- cmd->request_buffer, cmd->sglist_len, cmd->buffer);
- for (i = 0; i < cmd->cmd_len; i++)
- printk("0x%02x ", cmd->cmnd[i]);
- printk("\n");
-}
-
-}
-
-#endif /* DEBUG_CMND */
-
-
-
-
-static void QueCmndOnBoardLock( CPQFCHBA *cpqfcHBAdata, Scsi_Cmnd *Cmnd)
-{
- int i;
-
- for( i=0; i< CPQFCTS_REQ_QUEUE_LEN; i++)
- { // find spare slot
- if( cpqfcHBAdata->BoardLockCmnd[i] == NULL )
- {
- cpqfcHBAdata->BoardLockCmnd[i] = Cmnd;
-// printk(" BoardLockCmnd[%d] %p Queued, chnl/target/lun %d/%d/%d\n",
-// i,Cmnd, Cmnd->channel, Cmnd->target, Cmnd->lun);
- break;
- }
- }
- if( i >= CPQFCTS_REQ_QUEUE_LEN)
- {
- printk(" cpqfcTS WARNING: Lost Cmnd %p on BoardLock Q full!", Cmnd);
- }
-
-}
-
-
-static void QueLinkDownCmnd( CPQFCHBA *cpqfcHBAdata, Scsi_Cmnd *Cmnd)
-{
- int indx;
-
- // Remember the command ptr so we can return; we'll complete when
- // the device comes back, causing immediate retry
- for( indx=0; indx < CPQFCTS_REQ_QUEUE_LEN; indx++)//, SCptr++)
- {
- if( cpqfcHBAdata->LinkDnCmnd[indx] == NULL ) // available?
- {
-#ifdef DUMMYCMND_DBG
- printk(" @add Cmnd %p to LnkDnCmnd[%d]@ ", Cmnd,indx);
-#endif
- cpqfcHBAdata->LinkDnCmnd[indx] = Cmnd;
- break;
- }
- }
-
- if( indx >= CPQFCTS_REQ_QUEUE_LEN ) // no space for Cmnd??
- {
- // this will result in an _abort call later (with possible trouble)
- printk("no buffer for LinkDnCmnd!! %p\n", Cmnd);
- }
-}
-
-
-
-
-
-// The file <scsi/scsi_host.h> says not to call scsi_done from
-// inside _queuecommand, so we'll do it from the heartbeat timer
-// (clarification: Turns out it's ok to call scsi_done from queuecommand
-// for cases that don't go to the hardware like scsi cmds destined
-// for LUNs we know don't exist, so this code might be simplified...)
-
-static void QueBadTargetCmnd( CPQFCHBA *cpqfcHBAdata, Scsi_Cmnd *Cmnd)
-{
- int i;
- // printk(" can't find target %d\n", Cmnd->target);
-
- for( i=0; i< CPQFCTS_MAX_TARGET_ID; i++)
- { // find spare slot
- if( cpqfcHBAdata->BadTargetCmnd[i] == NULL )
- {
- cpqfcHBAdata->BadTargetCmnd[i] = Cmnd;
-// printk(" BadTargetCmnd[%d] %p Queued, chnl/target/lun %d/%d/%d\n",
-// i,Cmnd, Cmnd->channel, Cmnd->target, Cmnd->lun);
- break;
- }
- }
-}
-
-
-// This is the "main" entry point for Linux Scsi commands --
-// it all starts here.
-
-int cpqfcTS_queuecommand(Scsi_Cmnd *Cmnd, void (* done)(Scsi_Cmnd *))
-{
- struct Scsi_Host *HostAdapter = Cmnd->device->host;
- CPQFCHBA *cpqfcHBAdata = (CPQFCHBA *)HostAdapter->hostdata;
- PTACHYON fcChip = &cpqfcHBAdata->fcChip;
- TachFCHDR_GCMND fchs; // only use for FC destination id field
- PFC_LOGGEDIN_PORT pLoggedInPort;
- ULONG ulStatus, SESTtype;
- LONG ExchangeID;
-
-
-
-
- ENTER("cpqfcTS_queuecommand");
-
- PCI_TRACEO( (ULONG)Cmnd, 0x98)
-
-
- Cmnd->scsi_done = done;
-#ifdef DEBUG_CMND
- cpqfcTS_print_scsi_cmd( Cmnd);
-#endif
-
- // prevent board contention with kernel thread...
-
- if( cpqfcHBAdata->BoardLock )
- {
-// printk(" @BrdLck Hld@ ");
- QueCmndOnBoardLock( cpqfcHBAdata, Cmnd);
- }
-
- else
- {
-
- // in the current system (2.2.12), this routine is called
- // after spin_lock_irqsave(), so INTs are disabled. However,
- // we might have something pending in the LinkQ, which
- // might cause the WorkerTask to run. In case that
- // happens, make sure we lock it out.
-
-
-
- PCI_TRACE( 0x98)
- CPQ_SPINLOCK_HBA( cpqfcHBAdata)
- PCI_TRACE( 0x98)
-
- // can we find an FC device mapping to this SCSI target?
- pLoggedInPort = fcFindLoggedInPort( fcChip,
- Cmnd, // search Scsi Nexus
- 0, // DON'T search linked list for FC port id
- NULL, // DON'T search linked list for FC WWN
- NULL); // DON'T care about end of list
-
- if( pLoggedInPort == NULL ) // not found!
- {
-// printk(" @Q bad targ cmnd %p@ ", Cmnd);
- QueBadTargetCmnd( cpqfcHBAdata, Cmnd);
- }
- else if (Cmnd->device->lun >= CPQFCTS_MAX_LUN)
- {
- printk(KERN_WARNING "cpqfc: Invalid LUN: %d\n", Cmnd->device->lun);
- QueBadTargetCmnd( cpqfcHBAdata, Cmnd);
- }
-
- else // we know what FC device to send to...
- {
-
- // does this device support FCP target functions?
- // (determined by PRLI field)
-
- if( !(pLoggedInPort->fcp_info & TARGET_FUNCTION) )
- {
- printk(" Doesn't support TARGET functions port_id %Xh\n",
- pLoggedInPort->port_id );
- QueBadTargetCmnd( cpqfcHBAdata, Cmnd);
- }
-
- // In this case (previous login OK), the device is temporarily
- // unavailable waiting for re-login, in which case we expect it
- // to be back in between 25 - 500ms.
- // If the FC port doesn't log back in within several seconds
- // (i.e. implicit "logout"), or we get an explicit logout,
- // we set "device_blocked" in Scsi_Device struct; in this
- // case 30 seconds will elapse before Linux/Scsi sends another
- // command to the device.
- else if( pLoggedInPort->prli != TRUE )
- {
-// printk("Device (Chnl/Target %d/%d) invalid PRLI, port_id %06lXh\n",
-// Cmnd->channel, Cmnd->target, pLoggedInPort->port_id);
- QueLinkDownCmnd( cpqfcHBAdata, Cmnd);
-// Need to use "blocked" flag??
-// Cmnd->device->device_blocked = TRUE; // just let it timeout
- }
- else // device supports TARGET functions, and is logged in...
- {
- // (context of fchs is to "reply" to...)
- fchs.s_id = pLoggedInPort->port_id; // destination FC address
-
- // what is the data direction? For data TO the device,
- // we need IWE (Intiator Write Entry). Otherwise, IRE.
-
- if( Cmnd->cmnd[0] == WRITE_10 ||
- Cmnd->cmnd[0] == WRITE_6 ||
- Cmnd->cmnd[0] == WRITE_BUFFER ||
- Cmnd->cmnd[0] == VENDOR_WRITE_OPCODE || // CPQ specific
- Cmnd->cmnd[0] == MODE_SELECT )
- {
- SESTtype = SCSI_IWE; // data from HBA to Device
- }
- else
- SESTtype = SCSI_IRE; // data from Device to HBA
-
- ulStatus = cpqfcTSBuildExchange(
- cpqfcHBAdata,
- SESTtype, // e.g. Initiator Read Entry (IRE)
- &fchs, // we are originator; only use d_id
- Cmnd, // Linux SCSI command (with scatter/gather list)
- &ExchangeID );// fcController->fcExchanges index, -1 if failed
-
- if( !ulStatus ) // Exchange setup?
-
- {
- if( cpqfcHBAdata->BoardLock )
- {
- TriggerHBA( fcChip->Registers.ReMapMemBase, 0);
- printk(" @bl! %d, xID %Xh@ ", current->pid, ExchangeID);
- }
-
- ulStatus = cpqfcTSStartExchange( cpqfcHBAdata, ExchangeID );
- if( !ulStatus )
- {
- PCI_TRACEO( ExchangeID, 0xB8)
- // submitted to Tach's Outbound Que (ERQ PI incremented)
- // waited for completion for ELS type (Login frames issued
- // synchronously)
- }
- else
- // check reason for Exchange not being started - we might
- // want to Queue and start later, or fail with error
- {
- printk("quecommand: cpqfcTSStartExchange failed: %Xh\n", ulStatus );
- }
- } // end good BuildExchange status
-
- else // SEST table probably full -- why? hardware hang?
- {
- printk("quecommand: cpqfcTSBuildExchange faild: %Xh\n", ulStatus);
- }
- } // end can't do FCP-SCSI target functions
- } // end can't find target (FC device)
-
- CPQ_SPINUNLOCK_HBA( cpqfcHBAdata)
- }
-
- PCI_TRACEO( (ULONG)Cmnd, 0x9C)
- LEAVE("cpqfcTS_queuecommand");
- return 0;
-}
-
-
-// Entry point for upper Scsi layer intiated abort. Typically
-// this is called if the command (for hard disk) fails to complete
-// in 30 seconds. This driver intends to complete all disk commands
-// within Exchange ".timeOut" seconds (now 7) with target status, or
-// in case of ".timeOut" expiration, a DID_SOFT_ERROR which causes
-// immediate retry.
-// If any disk commands get the _abort call, except for the case that
-// the physical device was removed or unavailable due to hardware
-// errors, it should be considered a driver error and reported to
-// the author.
-
-int cpqfcTS_abort(Scsi_Cmnd *Cmnd)
-{
-// printk(" cpqfcTS_abort called?? \n");
- return 0;
-}
-
-int cpqfcTS_eh_abort(Scsi_Cmnd *Cmnd)
-{
-
- struct Scsi_Host *HostAdapter = Cmnd->device->host;
- // get the pointer to our Scsi layer HBA buffer
- CPQFCHBA *cpqfcHBAdata = (CPQFCHBA *)HostAdapter->hostdata;
- PTACHYON fcChip = &cpqfcHBAdata->fcChip;
- FC_EXCHANGES *Exchanges = fcChip->Exchanges;
- int i;
- ENTER("cpqfcTS_eh_abort");
-
- Cmnd->result = DID_ABORT <<16; // assume we'll find it
-
- printk(" @Linux _abort Scsi_Cmnd %p ", Cmnd);
- // See if we can find a Cmnd pointer that matches...
- // The most likely case is we accepted the command
- // from Linux Scsi (e.g. ceated a SEST entry) and it
- // got lost somehow. If we can't find any reference
- // to the passed pointer, we can only presume it
- // got completed as far as our driver is concerned.
- // If we found it, we will try to abort it through
- // common mechanism. If FC ABTS is successful (ACC)
- // or is rejected (RJT) by target, we will call
- // Scsi "done" quickly. Otherwise, the ABTS will timeout
- // and we'll call "done" later.
-
- // Search the SEST exchanges for a matching Cmnd ptr.
- for( i=0; i< TACH_SEST_LEN; i++)
- {
- if( Exchanges->fcExchange[i].Cmnd == Cmnd )
- {
-
- // found it!
- printk(" x_ID %Xh, type %Xh\n", i, Exchanges->fcExchange[i].type);
-
- Exchanges->fcExchange[i].status = INITIATOR_ABORT; // seconds default
- Exchanges->fcExchange[i].timeOut = 10; // seconds default (changed later)
-
- // Since we need to immediately return the aborted Cmnd to Scsi
- // upper layers, we can't make future reference to any of its
- // fields (e.g the Nexus).
-
- cpqfcTSPutLinkQue( cpqfcHBAdata, BLS_ABTS, &i);
-
- break;
- }
- }
-
- if( i >= TACH_SEST_LEN ) // didn't find Cmnd ptr in chip's SEST?
- {
- // now search our non-SEST buffers (i.e. Cmnd waiting to
- // start on the HBA or waiting to complete with error for retry).
-
- // first check BadTargetCmnd
- for( i=0; i< CPQFCTS_MAX_TARGET_ID; i++)
- {
- if( cpqfcHBAdata->BadTargetCmnd[i] == Cmnd )
- {
- cpqfcHBAdata->BadTargetCmnd[i] = NULL;
- printk("in BadTargetCmnd Q\n");
- goto Done; // exit
- }
- }
-
- // if not found above...
-
- for( i=0; i < CPQFCTS_REQ_QUEUE_LEN; i++)
- {
- if( cpqfcHBAdata->LinkDnCmnd[i] == Cmnd )
- {
- cpqfcHBAdata->LinkDnCmnd[i] = NULL;
- printk("in LinkDnCmnd Q\n");
- goto Done;
- }
- }
-
-
- for( i=0; i< CPQFCTS_REQ_QUEUE_LEN; i++)
- { // find spare slot
- if( cpqfcHBAdata->BoardLockCmnd[i] == Cmnd )
- {
- cpqfcHBAdata->BoardLockCmnd[i] = NULL;
- printk("in BoardLockCmnd Q\n");
- goto Done;
- }
- }
-
- Cmnd->result = DID_ERROR <<16; // Hmmm...
- printk("Not found! ");
-// panic("_abort");
- }
-
-Done:
-
-// panic("_abort");
- LEAVE("cpqfcTS_eh_abort");
- return 0; // (see scsi.h)
-}
-
-
-// FCP-SCSI Target Device Reset
-// See dpANS Fibre Channel Protocol for SCSI
-// X3.269-199X revision 12, pg 25
-
-#ifdef SUPPORT_RESET
-
-int cpqfcTS_TargetDeviceReset( Scsi_Device *ScsiDev,
- unsigned int reset_flags)
-{
- int timeout = 10*HZ;
- int retries = 1;
- char scsi_cdb[12];
- int result;
- Scsi_Cmnd * SCpnt;
- Scsi_Device * SDpnt;
-
-// FIXME, cpqfcTS_TargetDeviceReset needs to be fixed
-// similarly to how the passthrough ioctl was fixed
-// around the 2.5.30 kernel. Scsi_Cmnd replaced with
-// Scsi_Request, etc.
-// For now, so people don't fall into a hole...
-
- // printk(" ENTERING cpqfcTS_TargetDeviceReset() - flag=%d \n",reset_flags);
-
- if (ScsiDev->host->eh_active) return FAILED;
-
- memset( scsi_cdb, 0, sizeof( scsi_cdb));
-
- scsi_cdb[0] = RELEASE;
-
- SCpnt = scsi_get_command(ScsiDev, GFP_KERNEL);
- {
- CPQFC_DECLARE_COMPLETION(wait);
-
- SCpnt->SCp.buffers_residual = FCP_TARGET_RESET;
-
- // FIXME: this would panic, SCpnt->request would be NULL.
- SCpnt->request->CPQFC_WAITING = &wait;
- scsi_do_cmd(SCpnt, scsi_cdb, NULL, 0, my_ioctl_done, timeout, retries);
- CPQFC_WAIT_FOR_COMPLETION(&wait);
- SCpnt->request->CPQFC_WAITING = NULL;
- }
-
-
- if(driver_byte(SCpnt->result) != 0)
- switch(SCpnt->sense_buffer[2] & 0xf) {
- case ILLEGAL_REQUEST:
- if(cmd[0] == ALLOW_MEDIUM_REMOVAL) dev->lockable = 0;
- else printk("SCSI device (ioctl) reports ILLEGAL REQUEST.\n");
- break;
- case NOT_READY: // This happens if there is no disc in drive
- if(dev->removable && (cmd[0] != TEST_UNIT_READY)){
- printk(KERN_INFO "Device not ready. Make sure there is a disc in the drive.\n");
- break;
- }
- case UNIT_ATTENTION:
- if (dev->removable){
- dev->changed = 1;
- SCpnt->result = 0; // This is no longer considered an error
- // gag this error, VFS will log it anyway /axboe
- // printk(KERN_INFO "Disc change detected.\n");
- break;
- };
- default: // Fall through for non-removable media
- printk("SCSI error: host %d id %d lun %d return code = %x\n",
- dev->host->host_no,
- dev->id,
- dev->lun,
- SCpnt->result);
- printk("\tSense class %x, sense error %x, extended sense %x\n",
- sense_class(SCpnt->sense_buffer[0]),
- sense_error(SCpnt->sense_buffer[0]),
- SCpnt->sense_buffer[2] & 0xf);
-
- };
- result = SCpnt->result;
-
- SDpnt = SCpnt->device;
- scsi_put_command(SCpnt);
- SCpnt = NULL;
-
- // printk(" LEAVING cpqfcTS_TargetDeviceReset() - return SUCCESS \n");
- return SUCCESS;
-}
-
-#else
-int cpqfcTS_TargetDeviceReset( Scsi_Device *ScsiDev,
- unsigned int reset_flags)
-{
- return -ENOTSUPP;
-}
-
-#endif /* SUPPORT_RESET */
-
-int cpqfcTS_eh_device_reset(Scsi_Cmnd *Cmnd)
-{
- int retval;
- Scsi_Device *SDpnt = Cmnd->device;
- // printk(" ENTERING cpqfcTS_eh_device_reset() \n");
- spin_unlock_irq(Cmnd->device->host->host_lock);
- retval = cpqfcTS_TargetDeviceReset( SDpnt, 0);
- spin_lock_irq(Cmnd->device->host->host_lock);
- return retval;
-}
-
-
-int cpqfcTS_reset(Scsi_Cmnd *Cmnd, unsigned int reset_flags)
-{
-
- ENTER("cpqfcTS_reset");
-
- LEAVE("cpqfcTS_reset");
- return SCSI_RESET_ERROR; /* Bus Reset Not supported */
-}
-
-/* This function determines the bios parameters for a given
- harddisk. These tend to be numbers that are made up by the
- host adapter. Parameters:
- size, device number, list (heads, sectors,cylinders).
- (from hosts.h)
-*/
-
-int cpqfcTS_biosparam(struct scsi_device *sdev, struct block_device *n,
- sector_t capacity, int ip[])
-{
- int size = capacity;
-
- ENTER("cpqfcTS_biosparam");
- ip[0] = 64;
- ip[1] = 32;
- ip[2] = size >> 11;
-
- if( ip[2] > 1024 )
- {
- ip[0] = 255;
- ip[1] = 63;
- ip[2] = size / (ip[0] * ip[1]);
- }
-
- LEAVE("cpqfcTS_biosparam");
- return 0;
-}
-
-
-
-irqreturn_t cpqfcTS_intr_handler( int irq,
- void *dev_id,
- struct pt_regs *regs)
-{
-
- unsigned long flags, InfLoopBrk=0;
- struct Scsi_Host *HostAdapter = dev_id;
- CPQFCHBA *cpqfcHBA = (CPQFCHBA *)HostAdapter->hostdata;
- int MoreMessages = 1; // assume we have something to do
- UCHAR IntPending;
- int handled = 0;
-
- ENTER("intr_handler");
- spin_lock_irqsave( HostAdapter->host_lock, flags);
- // is this our INT?
- IntPending = readb( cpqfcHBA->fcChip.Registers.INTPEND.address);
-
- // broken boards can generate messages forever, so
- // prevent the infinite loop
-#define INFINITE_IMQ_BREAK 10000
- if( IntPending )
- {
- handled = 1;
- // mask our HBA interrupts until we handle it...
- writeb( 0, cpqfcHBA->fcChip.Registers.INTEN.address);
-
- if( IntPending & 0x4) // "INT" - Tach wrote to IMQ
- {
- while( (++InfLoopBrk < INFINITE_IMQ_BREAK) && (MoreMessages ==1) )
- {
- MoreMessages = CpqTsProcessIMQEntry( HostAdapter); // ret 0 when done
- }
- if( InfLoopBrk >= INFINITE_IMQ_BREAK )
- {
- printk("WARNING: Compaq FC adapter generating excessive INTs -REPLACE\n");
- printk("or investigate alternate causes (e.g. physical FC layer)\n");
- }
-
- else // working normally - re-enable INTs and continue
- writeb( 0x1F, cpqfcHBA->fcChip.Registers.INTEN.address);
-
- } // (...ProcessIMQEntry() clears INT by writing IMQ consumer)
- else // indications of errors or problems...
- // these usually indicate critical system hardware problems.
- {
- if( IntPending & 0x10 )
- printk(" cpqfcTS adapter external memory parity error detected\n");
- if( IntPending & 0x8 )
- printk(" cpqfcTS adapter PCI master address crossed 45-bit boundary\n");
- if( IntPending & 0x2 )
- printk(" cpqfcTS adapter DMA error detected\n");
- if( IntPending & 0x1 ) {
- UCHAR IntStat;
- printk(" cpqfcTS adapter PCI error detected\n");
- IntStat = readb( cpqfcHBA->fcChip.Registers.INTSTAT.address);
- printk("cpqfc: ISR = 0x%02x\n", IntStat);
- if (IntStat & 0x1) {
- __u16 pcistat;
- /* read the pci status register */
- pci_read_config_word(cpqfcHBA->PciDev, 0x06, &pcistat);
- printk("PCI status register is 0x%04x\n", pcistat);
- if (pcistat & 0x8000) printk("Parity Error Detected.\n");
- if (pcistat & 0x4000) printk("Signalled System Error\n");
- if (pcistat & 0x2000) printk("Received Master Abort\n");
- if (pcistat & 0x1000) printk("Received Target Abort\n");
- if (pcistat & 0x0800) printk("Signalled Target Abort\n");
- }
- if (IntStat & 0x4) printk("(INT)\n");
- if (IntStat & 0x8)
- printk("CRS: PCI master address crossed 46 bit bouandary\n");
- if (IntStat & 0x10) printk("MRE: external memory parity error.\n");
- }
- }
- }
- spin_unlock_irqrestore( HostAdapter->host_lock, flags);
- LEAVE("intr_handler");
- return IRQ_RETVAL(handled);
-}
-
-
-
-
-int cpqfcTSDecodeGBICtype( PTACHYON fcChip, char cErrorString[])
-{
- // Verify GBIC type (if any) and correct Tachyon Port State Machine
- // (GBIC) module definition is:
- // GPIO1, GPIO0, GPIO4 for MD2, MD1, MD0. The input states appear
- // to be inverted -- i.e., a setting of 111 is read when there is NO
- // GBIC present. The Module Def (MD) spec says 000 is "no GBIC"
- // Hard code the bit states to detect Copper,
- // Long wave (single mode), Short wave (multi-mode), and absent GBIC
-
- ULONG ulBuff;
-
- sprintf( cErrorString, "\nGBIC detected: ");
-
- ulBuff = fcChip->Registers.TYstatus.value & 0x13;
- switch( ulBuff )
- {
- case 0x13: // GPIO4, GPIO1, GPIO0 = 111; no GBIC!
- sprintf( &cErrorString[ strlen( cErrorString)],
- "NONE! ");
- return FALSE;
-
-
- case 0x11: // Copper GBIC detected
- sprintf( &cErrorString[ strlen( cErrorString)],
- "Copper. ");
- break;
-
- case 0x10: // Long-wave (single mode) GBIC detected
- sprintf( &cErrorString[ strlen( cErrorString)],
- "Long-wave. ");
- break;
- case 0x1: // Short-wave (multi mode) GBIC detected
- sprintf( &cErrorString[ strlen( cErrorString)],
- "Short-wave. ");
- break;
- default: // unknown GBIC - presumably it will work (?)
- sprintf( &cErrorString[ strlen( cErrorString)],
- "Unknown. ");
-
- break;
- } // end switch GBIC detection
-
- return TRUE;
-}
-
-
-
-
-
-
-int cpqfcTSGetLPSM( PTACHYON fcChip, char cErrorString[])
-{
- // Tachyon's Frame Manager LPSM in LinkDown state?
- // (For non-loop port, check PSM instead.)
- // return string with state and FALSE is Link Down
-
- int LinkUp;
-
- if( fcChip->Registers.FMstatus.value & 0x80 )
- LinkUp = FALSE;
- else
- LinkUp = TRUE;
-
- sprintf( &cErrorString[ strlen( cErrorString)],
- " LPSM %Xh ",
- (fcChip->Registers.FMstatus.value >>4) & 0xf );
-
-
- switch( fcChip->Registers.FMstatus.value & 0xF0)
- {
- // bits set in LPSM
- case 0x10:
- sprintf( &cErrorString[ strlen( cErrorString)], "ARB");
- break;
- case 0x20:
- sprintf( &cErrorString[ strlen( cErrorString)], "ARBwon");
- break;
- case 0x30:
- sprintf( &cErrorString[ strlen( cErrorString)], "OPEN");
- break;
- case 0x40:
- sprintf( &cErrorString[ strlen( cErrorString)], "OPENed");
- break;
- case 0x50:
- sprintf( &cErrorString[ strlen( cErrorString)], "XmitCLS");
- break;
- case 0x60:
- sprintf( &cErrorString[ strlen( cErrorString)], "RxCLS");
- break;
- case 0x70:
- sprintf( &cErrorString[ strlen( cErrorString)], "Xfer");
- break;
- case 0x80:
- sprintf( &cErrorString[ strlen( cErrorString)], "Init");
- break;
- case 0x90:
- sprintf( &cErrorString[ strlen( cErrorString)], "O-IInitFin");
- break;
- case 0xa0:
- sprintf( &cErrorString[ strlen( cErrorString)], "O-IProtocol");
- break;
- case 0xb0:
- sprintf( &cErrorString[ strlen( cErrorString)], "O-ILipRcvd");
- break;
- case 0xc0:
- sprintf( &cErrorString[ strlen( cErrorString)], "HostControl");
- break;
- case 0xd0:
- sprintf( &cErrorString[ strlen( cErrorString)], "LoopFail");
- break;
- case 0xe0:
- sprintf( &cErrorString[ strlen( cErrorString)], "Offline");
- break;
- case 0xf0:
- sprintf( &cErrorString[ strlen( cErrorString)], "OldPort");
- break;
- case 0:
- default:
- sprintf( &cErrorString[ strlen( cErrorString)], "Monitor");
- break;
-
- }
-
- return LinkUp;
-}
-
-
-
-
-#include "linux/slab.h"
-
-// Dynamic memory allocation alignment routines
-// HP's Tachyon Fibre Channel Controller chips require
-// certain memory queues and register pointers to be aligned
-// on various boundaries, usually the size of the Queue in question.
-// Alignment might be on 2, 4, 8, ... or even 512 byte boundaries.
-// Since most O/Ss don't allow this (usually only Cache aligned -
-// 32-byte boundary), these routines provide generic alignment (after
-// O/S allocation) at any boundary, and store the original allocated
-// pointer for deletion (O/S free function). Typically, we expect
-// these functions to only be called at HBA initialization and
-// removal time (load and unload times)
-// ALGORITHM notes:
-// Memory allocation varies by compiler and platform. In the worst case,
-// we are only assured BYTE alignment, but in the best case, we can
-// request allocation on any desired boundary. Our strategy: pad the
-// allocation request size (i.e. waste memory) so that we are assured
-// of passing desired boundary near beginning of contiguous space, then
-// mask out lower address bits.
-// We define the following algorithm:
-// allocBoundary - compiler/platform specific address alignment
-// in number of bytes (default is single byte; i.e. 1)
-// n_alloc - number of bytes application wants @ aligned address
-// ab - alignment boundary, in bytes (e.g. 4, 32, ...)
-// t_alloc - total allocation needed to ensure desired boundary
-// mask - to clear least significant address bits for boundary
-// Compute:
-// t_alloc = n_alloc + (ab - allocBoundary)
-// allocate t_alloc bytes @ alloc_address
-// mask = NOT (ab - 1)
-// (e.g. if ab=32 _0001 1111 -> _1110 0000
-// aligned_address = alloc_address & mask
-// set n_alloc bytes to 0
-// return aligned_address (NULL if failed)
-//
-// If u32_AlignedAddress is non-zero, then search for BaseAddress (stored
-// from previous allocation). If found, invoke call to FREE the memory.
-// Return NULL if BaseAddress not found
-
-// we need about 8 allocations per HBA. Figuring at most 10 HBAs per server
-// size the dynamic_mem array at 80.
-
-void* fcMemManager( struct pci_dev *pdev, ALIGNED_MEM *dynamic_mem,
- ULONG n_alloc, ULONG ab, ULONG u32_AlignedAddress,
- dma_addr_t *dma_handle)
-{
- USHORT allocBoundary=1; // compiler specific - worst case 1
- // best case - replace malloc() call
- // with function that allocates exactly
- // at desired boundary
-
- unsigned long ulAddress;
- ULONG t_alloc, i;
- void *alloc_address = 0; // def. error code / address not found
- LONG mask; // must be 32-bits wide!
-
- ENTER("fcMemManager");
- if( u32_AlignedAddress ) // are we freeing existing memory?
- {
-// printk(" freeing AlignedAddress %Xh\n", u32_AlignedAddress);
- for( i=0; i<DYNAMIC_ALLOCATIONS; i++) // look for the base address
- {
-// printk("dynamic_mem[%u].AlignedAddress %lX\n", i, dynamic_mem[i].AlignedAddress);
- if( dynamic_mem[i].AlignedAddress == u32_AlignedAddress )
- {
- alloc_address = dynamic_mem[i].BaseAllocated; // 'success' status
- pci_free_consistent(pdev,dynamic_mem[i].size,
- alloc_address,
- dynamic_mem[i].dma_handle);
- dynamic_mem[i].BaseAllocated = 0; // clear for next use
- dynamic_mem[i].AlignedAddress = 0;
- dynamic_mem[i].size = 0;
- break; // quit for loop; done
- }
- }
- }
- else if( n_alloc ) // want new memory?
- {
- dma_addr_t handle;
- t_alloc = n_alloc + (ab - allocBoundary); // pad bytes for alignment
-// printk("pci_alloc_consistent() for Tach alignment: %ld bytes\n", t_alloc);
-
-// (would like to) allow thread block to free pages
- alloc_address = // total bytes (NumberOfBytes)
- pci_alloc_consistent(pdev, t_alloc, &handle);
-
- // now mask off least sig. bits of address
- if( alloc_address ) // (only if non-NULL)
- {
- // find place to store ptr, so we
- // can free it later...
-
- mask = (LONG)(ab - 1); // mask all low-order bits
- mask = ~mask; // invert bits
- for( i=0; i<DYNAMIC_ALLOCATIONS; i++) // look for free slot
- {
- if( dynamic_mem[i].BaseAllocated == 0) // take 1st available
- {
- dynamic_mem[i].BaseAllocated = alloc_address;// address from O/S
- dynamic_mem[i].dma_handle = handle;
- if (dma_handle != NULL)
- {
-// printk("handle = %p, ab=%d, boundary = %d, mask=0x%08x\n",
-// handle, ab, allocBoundary, mask);
- *dma_handle = (dma_addr_t)
- ((((ULONG)handle) + (ab - allocBoundary)) & mask);
- }
- dynamic_mem[i].size = t_alloc;
- break;
- }
- }
- ulAddress = (unsigned long)alloc_address;
-
- ulAddress += (ab - allocBoundary); // add the alignment bytes-
- // then truncate address...
- alloc_address = (void*)(ulAddress & mask);
-
- dynamic_mem[i].AlignedAddress =
- (ULONG)(ulAddress & mask); // 32bit Tach address
- memset( alloc_address, 0, n_alloc ); // clear new memory
- }
- else // O/S dynamic mem alloc failed!
- alloc_address = 0; // (for debugging breakpt)
-
- }
-
- LEAVE("fcMemManager");
- return alloc_address; // good (or NULL) address
-}
-
-
-static Scsi_Host_Template driver_template = {
- .detect = cpqfcTS_detect,
- .release = cpqfcTS_release,
- .info = cpqfcTS_info,
- .proc_info = cpqfcTS_proc_info,
- .ioctl = cpqfcTS_ioctl,
- .queuecommand = cpqfcTS_queuecommand,
- .eh_device_reset_handler = cpqfcTS_eh_device_reset,
- .eh_abort_handler = cpqfcTS_eh_abort,
- .bios_param = cpqfcTS_biosparam,
- .can_queue = CPQFCTS_REQ_QUEUE_LEN,
- .this_id = -1,
- .sg_tablesize = SG_ALL,
- .cmd_per_lun = CPQFCTS_CMD_PER_LUN,
- .use_clustering = ENABLE_CLUSTERING,
-};
-#include "scsi_module.c"
-