summaryrefslogtreecommitdiffstats
path: root/drivers/net
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/net')
-rw-r--r--drivers/net/Kconfig32
-rw-r--r--drivers/net/Makefile3
-rw-r--r--drivers/net/Space.c12
-rw-r--r--drivers/net/bnx2.c229
-rw-r--r--drivers/net/bnx2.h10
-rw-r--r--drivers/net/bonding/bond_3ad.c11
-rw-r--r--drivers/net/bonding/bond_3ad.h2
-rw-r--r--drivers/net/bonding/bond_alb.c22
-rw-r--r--drivers/net/bonding/bond_main.c58
-rw-r--r--drivers/net/bonding/bonding.h3
-rw-r--r--drivers/net/chelsio/Makefile11
-rw-r--r--drivers/net/chelsio/common.h314
-rw-r--r--drivers/net/chelsio/cphy.h148
-rw-r--r--drivers/net/chelsio/cpl5_cmd.h145
-rw-r--r--drivers/net/chelsio/cxgb2.c1256
-rw-r--r--drivers/net/chelsio/elmer0.h151
-rw-r--r--drivers/net/chelsio/espi.c346
-rw-r--r--drivers/net/chelsio/espi.h68
-rw-r--r--drivers/net/chelsio/gmac.h134
-rw-r--r--drivers/net/chelsio/mv88x201x.c252
-rw-r--r--drivers/net/chelsio/pm3393.c826
-rw-r--r--drivers/net/chelsio/regs.h468
-rw-r--r--drivers/net/chelsio/sge.c1684
-rw-r--r--drivers/net/chelsio/sge.h105
-rw-r--r--drivers/net/chelsio/subr.c812
-rw-r--r--drivers/net/chelsio/suni1x10gexp_regs.h213
-rw-r--r--drivers/net/e100.c241
-rw-r--r--drivers/net/e1000/e1000_main.c4
-rw-r--r--drivers/net/eepro100.c8
-rw-r--r--drivers/net/forcedeth.c582
-rw-r--r--drivers/net/hamradio/6pack.c9
-rw-r--r--drivers/net/hamradio/Kconfig2
-rw-r--r--drivers/net/hamradio/baycom_epp.c3
-rw-r--r--drivers/net/hamradio/baycom_par.c3
-rw-r--r--drivers/net/hamradio/baycom_ser_fdx.c3
-rw-r--r--drivers/net/hamradio/baycom_ser_hdx.c3
-rw-r--r--drivers/net/hamradio/bpqether.c4
-rw-r--r--drivers/net/hamradio/mkiss.c1086
-rw-r--r--drivers/net/ibm_emac/ibm_emac_core.c2
-rw-r--r--drivers/net/ibmveth.c2
-rw-r--r--drivers/net/iseries_veth.c2
-rw-r--r--drivers/net/ixgb/ixgb.h2
-rw-r--r--drivers/net/ixgb/ixgb_ee.c170
-rw-r--r--drivers/net/ixgb/ixgb_ethtool.c59
-rw-r--r--drivers/net/ixgb/ixgb_hw.h9
-rw-r--r--drivers/net/ixgb/ixgb_main.c53
-rw-r--r--drivers/net/jazzsonic.c186
-rw-r--r--drivers/net/loopback.c22
-rw-r--r--drivers/net/macsonic.c538
-rw-r--r--drivers/net/mv643xx_eth.c29
-rw-r--r--drivers/net/mv643xx_eth.h4
-rw-r--r--drivers/net/pci-skeleton.c6
-rw-r--r--drivers/net/pcmcia/fmvj18x_cs.c25
-rw-r--r--drivers/net/phy/Kconfig57
-rw-r--r--drivers/net/phy/Makefile10
-rw-r--r--drivers/net/phy/cicada.c134
-rw-r--r--drivers/net/phy/davicom.c195
-rw-r--r--drivers/net/phy/lxt.c179
-rw-r--r--drivers/net/phy/marvell.c140
-rw-r--r--drivers/net/phy/mdio_bus.c176
-rw-r--r--drivers/net/phy/phy.c871
-rw-r--r--drivers/net/phy/phy_device.c696
-rw-r--r--drivers/net/phy/qsemi.c143
-rw-r--r--drivers/net/ppp_generic.c1
-rw-r--r--drivers/net/pppoe.c6
-rw-r--r--drivers/net/r8169.c1
-rw-r--r--drivers/net/rrunner.c3
-rw-r--r--drivers/net/s2io-regs.h87
-rw-r--r--drivers/net/s2io.c3085
-rw-r--r--drivers/net/s2io.h360
-rw-r--r--drivers/net/shaper.c50
-rw-r--r--drivers/net/sis190.c1843
-rw-r--r--drivers/net/skge.c65
-rw-r--r--drivers/net/skge.h19
-rw-r--r--drivers/net/smc-ultra.c1
-rw-r--r--drivers/net/sonic.c676
-rw-r--r--drivers/net/sonic.h460
-rw-r--r--drivers/net/tg3.c331
-rw-r--r--drivers/net/tg3.h10
-rw-r--r--drivers/net/tokenring/Kconfig4
-rw-r--r--drivers/net/tokenring/abyss.c2
-rw-r--r--drivers/net/tokenring/madgemc.c521
-rw-r--r--drivers/net/tokenring/proteon.c104
-rw-r--r--drivers/net/tokenring/skisa.c104
-rw-r--r--drivers/net/tokenring/tms380tr.c46
-rw-r--r--drivers/net/tokenring/tms380tr.h9
-rw-r--r--drivers/net/tokenring/tmspci.c4
-rw-r--r--drivers/net/tulip/Kconfig12
-rw-r--r--drivers/net/tulip/Makefile1
-rw-r--r--drivers/net/tulip/media.c36
-rw-r--r--drivers/net/tulip/timer.c1
-rw-r--r--drivers/net/tulip/tulip.h8
-rw-r--r--drivers/net/tulip/tulip_core.c34
-rw-r--r--drivers/net/tulip/uli526x.c1749
-rw-r--r--drivers/net/wan/cycx_drv.c24
-rw-r--r--drivers/net/wan/hdlc_generic.c2
-rw-r--r--drivers/net/wan/lapbether.c2
-rw-r--r--drivers/net/wan/sdla_fr.c22
-rw-r--r--drivers/net/wan/syncppp.c2
-rw-r--r--drivers/net/wireless/orinoco.c78
100 files changed, 18642 insertions, 4094 deletions
diff --git a/drivers/net/Kconfig b/drivers/net/Kconfig
index 8edb6936fb9..e0239a10d32 100644
--- a/drivers/net/Kconfig
+++ b/drivers/net/Kconfig
@@ -131,6 +131,8 @@ config NET_SB1000
source "drivers/net/arcnet/Kconfig"
+source "drivers/net/phy/Kconfig"
+
#
# Ethernet
#
@@ -1921,6 +1923,17 @@ config R8169_VLAN
If in doubt, say Y.
+config SIS190
+ tristate "SiS190 gigabit ethernet support"
+ depends on PCI
+ select CRC32
+ select MII
+ ---help---
+ Say Y here if you have a SiS 190 PCI Gigabit Ethernet adapter.
+
+ To compile this driver as a module, choose M here: the module
+ will be called sis190. This is recommended.
+
config SKGE
tristate "New SysKonnect GigaEthernet support (EXPERIMENTAL)"
depends on PCI && EXPERIMENTAL
@@ -2091,6 +2104,25 @@ endmenu
menu "Ethernet (10000 Mbit)"
depends on !UML
+config CHELSIO_T1
+ tristate "Chelsio 10Gb Ethernet support"
+ depends on PCI
+ help
+ This driver supports Chelsio N110 and N210 models 10Gb Ethernet
+ cards. More information about adapter features and performance
+ tuning is in <file:Documentation/networking/cxgb.txt>.
+
+ For general information about Chelsio and our products, visit
+ our website at <http://www.chelsio.com>.
+
+ For customer support, please visit our customer support page at
+ <http://www.chelsio.com/support.htm>.
+
+ Please send feedback to <linux-bugs@chelsio.com>.
+
+ To compile this driver as a module, choose M here: the module
+ will be called cxgb.
+
config IXGB
tristate "Intel(R) PRO/10GbE support"
depends on PCI
diff --git a/drivers/net/Makefile b/drivers/net/Makefile
index 63c6d1e6d4d..5baafcd5561 100644
--- a/drivers/net/Makefile
+++ b/drivers/net/Makefile
@@ -9,6 +9,7 @@ endif
obj-$(CONFIG_E1000) += e1000/
obj-$(CONFIG_IBM_EMAC) += ibm_emac/
obj-$(CONFIG_IXGB) += ixgb/
+obj-$(CONFIG_CHELSIO_T1) += chelsio/
obj-$(CONFIG_BONDING) += bonding/
obj-$(CONFIG_GIANFAR) += gianfar_driver.o
@@ -42,6 +43,7 @@ obj-$(CONFIG_EEPRO100) += eepro100.o
obj-$(CONFIG_E100) += e100.o
obj-$(CONFIG_TLAN) += tlan.o
obj-$(CONFIG_EPIC100) += epic100.o
+obj-$(CONFIG_SIS190) += sis190.o
obj-$(CONFIG_SIS900) += sis900.o
obj-$(CONFIG_YELLOWFIN) += yellowfin.o
obj-$(CONFIG_ACENIC) += acenic.o
@@ -65,6 +67,7 @@ obj-$(CONFIG_ADAPTEC_STARFIRE) += starfire.o
#
obj-$(CONFIG_MII) += mii.o
+obj-$(CONFIG_PHYLIB) += phy/
obj-$(CONFIG_SUNDANCE) += sundance.o
obj-$(CONFIG_HAMACHI) += hamachi.o
diff --git a/drivers/net/Space.c b/drivers/net/Space.c
index 3707df6b0cf..60304f7e7e5 100644
--- a/drivers/net/Space.c
+++ b/drivers/net/Space.c
@@ -87,7 +87,6 @@ extern struct net_device *mvme147lance_probe(int unit);
extern struct net_device *tc515_probe(int unit);
extern struct net_device *lance_probe(int unit);
extern struct net_device *mace_probe(int unit);
-extern struct net_device *macsonic_probe(int unit);
extern struct net_device *mac8390_probe(int unit);
extern struct net_device *mac89x0_probe(int unit);
extern struct net_device *mc32_probe(int unit);
@@ -284,9 +283,6 @@ static struct devprobe2 m68k_probes[] __initdata = {
#ifdef CONFIG_MACMACE /* Mac 68k Quadra AV builtin Ethernet */
{mace_probe, 0},
#endif
-#ifdef CONFIG_MACSONIC /* Mac SONIC-based Ethernet of all sorts */
- {macsonic_probe, 0},
-#endif
#ifdef CONFIG_MAC8390 /* NuBus NS8390-based cards */
{mac8390_probe, 0},
#endif
@@ -318,17 +314,9 @@ static void __init ethif_probe2(int unit)
#ifdef CONFIG_TR
/* Token-ring device probe */
extern int ibmtr_probe_card(struct net_device *);
-extern struct net_device *sk_isa_probe(int unit);
-extern struct net_device *proteon_probe(int unit);
extern struct net_device *smctr_probe(int unit);
static struct devprobe2 tr_probes2[] __initdata = {
-#ifdef CONFIG_SKISA
- {sk_isa_probe, 0},
-#endif
-#ifdef CONFIG_PROTEON
- {proteon_probe, 0},
-#endif
#ifdef CONFIG_SMCTR
{smctr_probe, 0},
#endif
diff --git a/drivers/net/bnx2.c b/drivers/net/bnx2.c
index 8acc655ec1e..7babf6af4e2 100644
--- a/drivers/net/bnx2.c
+++ b/drivers/net/bnx2.c
@@ -14,8 +14,8 @@
#define DRV_MODULE_NAME "bnx2"
#define PFX DRV_MODULE_NAME ": "
-#define DRV_MODULE_VERSION "1.2.19"
-#define DRV_MODULE_RELDATE "May 23, 2005"
+#define DRV_MODULE_VERSION "1.2.20"
+#define DRV_MODULE_RELDATE "August 22, 2005"
#define RUN_AT(x) (jiffies + (x))
@@ -52,7 +52,6 @@ static struct {
{ "HP NC370i Multifunction Gigabit Server Adapter" },
{ "Broadcom NetXtreme II BCM5706 1000Base-SX" },
{ "HP NC370F Multifunction Gigabit Server Adapter" },
- { 0 },
};
static struct pci_device_id bnx2_pci_tbl[] = {
@@ -108,6 +107,15 @@ static struct flash_spec flash_table[] =
MODULE_DEVICE_TABLE(pci, bnx2_pci_tbl);
+static inline u32 bnx2_tx_avail(struct bnx2 *bp)
+{
+ u32 diff = TX_RING_IDX(bp->tx_prod) - TX_RING_IDX(bp->tx_cons);
+
+ if (diff > MAX_TX_DESC_CNT)
+ diff = (diff & MAX_TX_DESC_CNT) - 1;
+ return (bp->tx_ring_size - diff);
+}
+
static u32
bnx2_reg_rd_ind(struct bnx2 *bp, u32 offset)
{
@@ -807,7 +815,19 @@ bnx2_setup_serdes_phy(struct bnx2 *bp)
bnx2_write_phy(bp, MII_ADVERTISE, new_adv);
bnx2_write_phy(bp, MII_BMCR, bmcr | BMCR_ANRESTART |
BMCR_ANENABLE);
- bp->serdes_an_pending = SERDES_AN_TIMEOUT / bp->timer_interval;
+ if (CHIP_NUM(bp) == CHIP_NUM_5706) {
+ /* Speed up link-up time when the link partner
+ * does not autonegotiate which is very common
+ * in blade servers. Some blade servers use
+ * IPMI for kerboard input and it's important
+ * to minimize link disruptions. Autoneg. involves
+ * exchanging base pages plus 3 next pages and
+ * normally completes in about 120 msec.
+ */
+ bp->current_interval = SERDES_AN_TIMEOUT;
+ bp->serdes_an_pending = 1;
+ mod_timer(&bp->timer, jiffies + bp->current_interval);
+ }
}
return 0;
@@ -1327,22 +1347,17 @@ bnx2_tx_int(struct bnx2 *bp)
}
}
- atomic_add(tx_free_bd, &bp->tx_avail_bd);
+ bp->tx_cons = sw_cons;
if (unlikely(netif_queue_stopped(bp->dev))) {
- unsigned long flags;
-
- spin_lock_irqsave(&bp->tx_lock, flags);
+ spin_lock(&bp->tx_lock);
if ((netif_queue_stopped(bp->dev)) &&
- (atomic_read(&bp->tx_avail_bd) > MAX_SKB_FRAGS)) {
+ (bnx2_tx_avail(bp) > MAX_SKB_FRAGS)) {
netif_wake_queue(bp->dev);
}
- spin_unlock_irqrestore(&bp->tx_lock, flags);
+ spin_unlock(&bp->tx_lock);
}
-
- bp->tx_cons = sw_cons;
-
}
static inline void
@@ -1523,15 +1538,12 @@ bnx2_msi(int irq, void *dev_instance, struct pt_regs *regs)
BNX2_PCICFG_INT_ACK_CMD_MASK_INT);
/* Return here if interrupt is disabled. */
- if (unlikely(atomic_read(&bp->intr_sem) != 0)) {
- return IRQ_RETVAL(1);
- }
+ if (unlikely(atomic_read(&bp->intr_sem) != 0))
+ return IRQ_HANDLED;
- if (netif_rx_schedule_prep(dev)) {
- __netif_rx_schedule(dev);
- }
+ netif_rx_schedule(dev);
- return IRQ_RETVAL(1);
+ return IRQ_HANDLED;
}
static irqreturn_t
@@ -1549,22 +1561,19 @@ bnx2_interrupt(int irq, void *dev_instance, struct pt_regs *regs)
if ((bp->status_blk->status_idx == bp->last_status_idx) ||
(REG_RD(bp, BNX2_PCICFG_MISC_STATUS) &
BNX2_PCICFG_MISC_STATUS_INTA_VALUE))
- return IRQ_RETVAL(0);
+ return IRQ_NONE;
REG_WR(bp, BNX2_PCICFG_INT_ACK_CMD,
BNX2_PCICFG_INT_ACK_CMD_USE_INT_HC_PARAM |
BNX2_PCICFG_INT_ACK_CMD_MASK_INT);
/* Return here if interrupt is shared and is disabled. */
- if (unlikely(atomic_read(&bp->intr_sem) != 0)) {
- return IRQ_RETVAL(1);
- }
+ if (unlikely(atomic_read(&bp->intr_sem) != 0))
+ return IRQ_HANDLED;
- if (netif_rx_schedule_prep(dev)) {
- __netif_rx_schedule(dev);
- }
+ netif_rx_schedule(dev);
- return IRQ_RETVAL(1);
+ return IRQ_HANDLED;
}
static int
@@ -1581,11 +1590,9 @@ bnx2_poll(struct net_device *dev, int *budget)
(bp->status_blk->status_attn_bits_ack &
STATUS_ATTN_BITS_LINK_STATE)) {
- unsigned long flags;
-
- spin_lock_irqsave(&bp->phy_lock, flags);
+ spin_lock(&bp->phy_lock);
bnx2_phy_int(bp);
- spin_unlock_irqrestore(&bp->phy_lock, flags);
+ spin_unlock(&bp->phy_lock);
}
if (bp->status_blk->status_tx_quick_consumer_index0 != bp->tx_cons) {
@@ -1628,9 +1635,8 @@ bnx2_set_rx_mode(struct net_device *dev)
struct bnx2 *bp = dev->priv;
u32 rx_mode, sort_mode;
int i;
- unsigned long flags;
- spin_lock_irqsave(&bp->phy_lock, flags);
+ spin_lock_bh(&bp->phy_lock);
rx_mode = bp->rx_mode & ~(BNX2_EMAC_RX_MODE_PROMISCUOUS |
BNX2_EMAC_RX_MODE_KEEP_VLAN_TAG);
@@ -1691,7 +1697,7 @@ bnx2_set_rx_mode(struct net_device *dev)
REG_WR(bp, BNX2_RPM_SORT_USER0, sort_mode);
REG_WR(bp, BNX2_RPM_SORT_USER0, sort_mode | BNX2_RPM_SORT_USER0_ENA);
- spin_unlock_irqrestore(&bp->phy_lock, flags);
+ spin_unlock_bh(&bp->phy_lock);
}
static void
@@ -2960,7 +2966,6 @@ bnx2_init_tx_ring(struct bnx2 *bp)
bp->tx_prod = 0;
bp->tx_cons = 0;
bp->tx_prod_bseq = 0;
- atomic_set(&bp->tx_avail_bd, bp->tx_ring_size);
val = BNX2_L2CTX_TYPE_TYPE_L2;
val |= BNX2_L2CTX_TYPE_SIZE_L2;
@@ -3507,11 +3512,11 @@ bnx2_test_registers(struct bnx2 *bp)
rw_mask = reg_tbl[i].rw_mask;
ro_mask = reg_tbl[i].ro_mask;
- save_val = readl((u8 *) bp->regview + offset);
+ save_val = readl(bp->regview + offset);
- writel(0, (u8 *) bp->regview + offset);
+ writel(0, bp->regview + offset);
- val = readl((u8 *) bp->regview + offset);
+ val = readl(bp->regview + offset);
if ((val & rw_mask) != 0) {
goto reg_test_err;
}
@@ -3520,9 +3525,9 @@ bnx2_test_registers(struct bnx2 *bp)
goto reg_test_err;
}
- writel(0xffffffff, (u8 *) bp->regview + offset);
+ writel(0xffffffff, bp->regview + offset);
- val = readl((u8 *) bp->regview + offset);
+ val = readl(bp->regview + offset);
if ((val & rw_mask) != rw_mask) {
goto reg_test_err;
}
@@ -3531,11 +3536,11 @@ bnx2_test_registers(struct bnx2 *bp)
goto reg_test_err;
}
- writel(save_val, (u8 *) bp->regview + offset);
+ writel(save_val, bp->regview + offset);
continue;
reg_test_err:
- writel(save_val, (u8 *) bp->regview + offset);
+ writel(save_val, bp->regview + offset);
ret = -ENODEV;
break;
}
@@ -3752,10 +3757,10 @@ bnx2_test_link(struct bnx2 *bp)
{
u32 bmsr;
- spin_lock_irq(&bp->phy_lock);
+ spin_lock_bh(&bp->phy_lock);
bnx2_read_phy(bp, MII_BMSR, &bmsr);
bnx2_read_phy(bp, MII_BMSR, &bmsr);
- spin_unlock_irq(&bp->phy_lock);
+ spin_unlock_bh(&bp->phy_lock);
if (bmsr & BMSR_LSTATUS) {
return 0;
@@ -3801,6 +3806,9 @@ bnx2_timer(unsigned long data)
struct bnx2 *bp = (struct bnx2 *) data;
u32 msg;
+ if (!netif_running(bp->dev))
+ return;
+
if (atomic_read(&bp->intr_sem) != 0)
goto bnx2_restart_timer;
@@ -3809,15 +3817,16 @@ bnx2_timer(unsigned long data)
if ((bp->phy_flags & PHY_SERDES_FLAG) &&
(CHIP_NUM(bp) == CHIP_NUM_5706)) {
- unsigned long flags;
- spin_lock_irqsave(&bp->phy_lock, flags);
+ spin_lock(&bp->phy_lock);
if (bp->serdes_an_pending) {
bp->serdes_an_pending--;
}
else if ((bp->link_up == 0) && (bp->autoneg & AUTONEG_SPEED)) {
u32 bmcr;
+ bp->current_interval = bp->timer_interval;
+
bnx2_read_phy(bp, MII_BMCR, &bmcr);
if (bmcr & BMCR_ANENABLE) {
@@ -3860,14 +3869,14 @@ bnx2_timer(unsigned long data)
}
}
+ else
+ bp->current_interval = bp->timer_interval;
- spin_unlock_irqrestore(&bp->phy_lock, flags);
+ spin_unlock(&bp->phy_lock);
}
bnx2_restart_timer:
- bp->timer.expires = RUN_AT(bp->timer_interval);
-
- add_timer(&bp->timer);
+ mod_timer(&bp->timer, jiffies + bp->current_interval);
}
/* Called with rtnl_lock */
@@ -3920,12 +3929,7 @@ bnx2_open(struct net_device *dev)
return rc;
}
- init_timer(&bp->timer);
-
- bp->timer.expires = RUN_AT(bp->timer_interval);
- bp->timer.data = (unsigned long) bp;
- bp->timer.function = bnx2_timer;
- add_timer(&bp->timer);
+ mod_timer(&bp->timer, jiffies + bp->current_interval);
atomic_set(&bp->intr_sem, 0);
@@ -3976,12 +3980,17 @@ bnx2_reset_task(void *data)
{
struct bnx2 *bp = data;
+ if (!netif_running(bp->dev))
+ return;
+
+ bp->in_reset_task = 1;
bnx2_netif_stop(bp);
bnx2_init_nic(bp);
atomic_set(&bp->intr_sem, 1);
bnx2_netif_start(bp);
+ bp->in_reset_task = 0;
}
static void
@@ -4041,9 +4050,7 @@ bnx2_start_xmit(struct sk_buff *skb, struct net_device *dev)
u16 prod, ring_prod;
int i;
- if (unlikely(atomic_read(&bp->tx_avail_bd) <
- (skb_shinfo(skb)->nr_frags + 1))) {
-
+ if (unlikely(bnx2_tx_avail(bp) < (skb_shinfo(skb)->nr_frags + 1))) {
netif_stop_queue(dev);
printk(KERN_ERR PFX "%s: BUG! Tx ring full when queue awake!\n",
dev->name);
@@ -4140,8 +4147,6 @@ bnx2_start_xmit(struct sk_buff *skb, struct net_device *dev)
prod = NEXT_TX_BD(prod);
bp->tx_prod_bseq += skb->len;
- atomic_sub(last_frag + 1, &bp->tx_avail_bd);
-
REG_WR16(bp, MB_TX_CID_ADDR + BNX2_L2CTX_TX_HOST_BIDX, prod);
REG_WR(bp, MB_TX_CID_ADDR + BNX2_L2CTX_TX_HOST_BSEQ, bp->tx_prod_bseq);
@@ -4150,17 +4155,13 @@ bnx2_start_xmit(struct sk_buff *skb, struct net_device *dev)
bp->tx_prod = prod;
dev->trans_start = jiffies;
- if (unlikely(atomic_read(&bp->tx_avail_bd) <= MAX_SKB_FRAGS)) {
- unsigned long flags;
-
- spin_lock_irqsave(&bp->tx_lock, flags);
- if (atomic_read(&bp->tx_avail_bd) <= MAX_SKB_FRAGS) {
- netif_stop_queue(dev);
-
- if (atomic_read(&bp->tx_avail_bd) > MAX_SKB_FRAGS)
- netif_wake_queue(dev);
- }
- spin_unlock_irqrestore(&bp->tx_lock, flags);
+ if (unlikely(bnx2_tx_avail(bp) <= MAX_SKB_FRAGS)) {
+ spin_lock(&bp->tx_lock);
+ netif_stop_queue(dev);
+
+ if (bnx2_tx_avail(bp) > MAX_SKB_FRAGS)
+ netif_wake_queue(dev);
+ spin_unlock(&bp->tx_lock);
}
return NETDEV_TX_OK;
@@ -4173,7 +4174,13 @@ bnx2_close(struct net_device *dev)
struct bnx2 *bp = dev->priv;
u32 reset_code;
- flush_scheduled_work();
+ /* Calling flush_scheduled_work() may deadlock because
+ * linkwatch_event() may be on the workqueue and it will try to get
+ * the rtnl_lock which we are holding.
+ */
+ while (bp->in_reset_task)
+ msleep(1);
+
bnx2_netif_stop(bp);
del_timer_sync(&bp->timer);
if (bp->wol)
@@ -4390,11 +4397,11 @@ bnx2_set_settings(struct net_device *dev, struct ethtool_cmd *cmd)
bp->req_line_speed = req_line_speed;
bp->req_duplex = req_duplex;
- spin_lock_irq(&bp->phy_lock);
+ spin_lock_bh(&bp->phy_lock);
bnx2_setup_phy(bp);
- spin_unlock_irq(&bp->phy_lock);
+ spin_unlock_bh(&bp->phy_lock);
return 0;
}
@@ -4464,19 +4471,20 @@ bnx2_nway_reset(struct net_device *dev)
return -EINVAL;
}
- spin_lock_irq(&bp->phy_lock);
+ spin_lock_bh(&bp->phy_lock);
/* Force a link down visible on the other side */
if (bp->phy_flags & PHY_SERDES_FLAG) {
bnx2_write_phy(bp, MII_BMCR, BMCR_LOOPBACK);
- spin_unlock_irq(&bp->phy_lock);
+ spin_unlock_bh(&bp->phy_lock);
msleep(20);
- spin_lock_irq(&bp->phy_lock);
+ spin_lock_bh(&bp->phy_lock);
if (CHIP_NUM(bp) == CHIP_NUM_5706) {
- bp->serdes_an_pending = SERDES_AN_TIMEOUT /
- bp->timer_interval;
+ bp->current_interval = SERDES_AN_TIMEOUT;
+ bp->serdes_an_pending = 1;
+ mod_timer(&bp->timer, jiffies + bp->current_interval);
}
}
@@ -4484,7 +4492,7 @@ bnx2_nway_reset(struct net_device *dev)
bmcr &= ~BMCR_LOOPBACK;
bnx2_write_phy(bp, MII_BMCR, bmcr | BMCR_ANRESTART | BMCR_ANENABLE);
- spin_unlock_irq(&bp->phy_lock);
+ spin_unlock_bh(&bp->phy_lock);
return 0;
}
@@ -4670,11 +4678,11 @@ bnx2_set_pauseparam(struct net_device *dev, struct ethtool_pauseparam *epause)
bp->autoneg &= ~AUTONEG_FLOW_CTRL;
}
- spin_lock_irq(&bp->phy_lock);
+ spin_lock_bh(&bp->phy_lock);
bnx2_setup_phy(bp);
- spin_unlock_irq(&bp->phy_lock);
+ spin_unlock_bh(&bp->phy_lock);
return 0;
}
@@ -4698,7 +4706,7 @@ bnx2_set_rx_csum(struct net_device *dev, u32 data)
#define BNX2_NUM_STATS 45
-struct {
+static struct {
char string[ETH_GSTRING_LEN];
} bnx2_stats_str_arr[BNX2_NUM_STATS] = {
{ "rx_bytes" },
@@ -4750,7 +4758,7 @@ struct {
#define STATS_OFFSET32(offset_name) (offsetof(struct statistics_block, offset_name) / 4)
-unsigned long bnx2_stats_offset_arr[BNX2_NUM_STATS] = {
+static unsigned long bnx2_stats_offset_arr[BNX2_NUM_STATS] = {
STATS_OFFSET32(stat_IfHCInOctets_hi),
STATS_OFFSET32(stat_IfHCInBadOctets_hi),
STATS_OFFSET32(stat_IfHCOutOctets_hi),
@@ -4801,7 +4809,7 @@ unsigned long bnx2_stats_offset_arr[BNX2_NUM_STATS] = {
/* stat_IfHCInBadOctets and stat_Dot3StatsCarrierSenseErrors are
* skipped because of errata.
*/
-u8 bnx2_5706_stats_len_arr[BNX2_NUM_STATS] = {
+static u8 bnx2_5706_stats_len_arr[BNX2_NUM_STATS] = {
8,0,8,8,8,8,8,8,8,8,
4,0,4,4,4,4,4,4,4,4,
4,4,4,4,4,4,4,4,4,4,
@@ -4811,7 +4819,7 @@ u8 bnx2_5706_stats_len_arr[BNX2_NUM_STATS] = {
#define BNX2_NUM_TESTS 6
-struct {
+static struct {
char string[ETH_GSTRING_LEN];
} bnx2_tests_str_arr[BNX2_NUM_TESTS] = {
{ "register_test (offline)" },
@@ -4910,7 +4918,7 @@ bnx2_get_ethtool_stats(struct net_device *dev,
struct bnx2 *bp = dev->priv;
int i;
u32 *hw_stats = (u32 *) bp->stats_blk;
- u8 *stats_len_arr = 0;
+ u8 *stats_len_arr = NULL;
if (hw_stats == NULL) {
memset(buf, 0, sizeof(u64) * BNX2_NUM_STATS);
@@ -5012,7 +5020,7 @@ static struct ethtool_ops bnx2_ethtool_ops = {
static int
bnx2_ioctl(struct net_device *dev, struct ifreq *ifr, int cmd)
{
- struct mii_ioctl_data *data = (struct mii_ioctl_data *)&ifr->ifr_data;
+ struct mii_ioctl_data *data = if_mii(ifr);
struct bnx2 *bp = dev->priv;
int err;
@@ -5024,9 +5032,9 @@ bnx2_ioctl(struct net_device *dev, struct ifreq *ifr, int cmd)
case SIOCGMIIREG: {
u32 mii_regval;
- spin_lock_irq(&bp->phy_lock);
+ spin_lock_bh(&bp->phy_lock);
err = bnx2_read_phy(bp, data->reg_num & 0x1f, &mii_regval);
- spin_unlock_irq(&bp->phy_lock);
+ spin_unlock_bh(&bp->phy_lock);
data->val_out = mii_regval;
@@ -5037,9 +5045,9 @@ bnx2_ioctl(struct net_device *dev, struct ifreq *ifr, int cmd)
if (!capable(CAP_NET_ADMIN))
return -EPERM;
- spin_lock_irq(&bp->phy_lock);
+ spin_lock_bh(&bp->phy_lock);
err = bnx2_write_phy(bp, data->reg_num & 0x1f, data->val_in);
- spin_unlock_irq(&bp->phy_lock);
+ spin_unlock_bh(&bp->phy_lock);
return err;
@@ -5057,6 +5065,9 @@ bnx2_change_mac_addr(struct net_device *dev, void *p)
struct sockaddr *addr = p;
struct bnx2 *bp = dev->priv;
+ if (!is_valid_ether_addr(addr->sa_data))
+ return -EINVAL;
+
memcpy(dev->dev_addr, addr->sa_data, dev->addr_len);
if (netif_running(dev))
bnx2_set_mac_addr(bp);
@@ -5305,6 +5316,7 @@ bnx2_init_board(struct pci_dev *pdev, struct net_device *dev)
bp->stats_ticks = 1000000 & 0xffff00;
bp->timer_interval = HZ;
+ bp->current_interval = HZ;
/* Disable WOL support if we are running on a SERDES chip. */
if (CHIP_BOND_ID(bp) & CHIP_BOND_ID_SERDES_BIT) {
@@ -5328,6 +5340,15 @@ bnx2_init_board(struct pci_dev *pdev, struct net_device *dev)
bp->req_line_speed = 0;
if (bp->phy_flags & PHY_SERDES_FLAG) {
bp->advertising = ETHTOOL_ALL_FIBRE_SPEED | ADVERTISED_Autoneg;
+
+ reg = REG_RD_IND(bp, HOST_VIEW_SHMEM_BASE +
+ BNX2_PORT_HW_CFG_CONFIG);
+ reg &= BNX2_PORT_HW_CFG_CFG_DFLT_LINK_MASK;
+ if (reg == BNX2_PORT_HW_CFG_CFG_DFLT_LINK_1G) {
+ bp->autoneg = 0;
+ bp->req_line_speed = bp->line_speed = SPEED_1000;
+ bp->req_duplex = DUPLEX_FULL;
+ }
}
else {
bp->advertising = ETHTOOL_ALL_COPPER_SPEED | ADVERTISED_Autoneg;
@@ -5335,11 +5356,17 @@ bnx2_init_board(struct pci_dev *pdev, struct net_device *dev)
bp->req_flow_ctrl = FLOW_CTRL_RX | FLOW_CTRL_TX;
+ init_timer(&bp->timer);
+ bp->timer.expires = RUN_AT(bp->timer_interval);
+ bp->timer.data = (unsigned long) bp;
+ bp->timer.function = bnx2_timer;
+
return 0;
err_out_unmap:
if (bp->regview) {
iounmap(bp->regview);
+ bp->regview = NULL;
}
err_out_release:
@@ -5454,6 +5481,8 @@ bnx2_remove_one(struct pci_dev *pdev)
struct net_device *dev = pci_get_drvdata(pdev);
struct bnx2 *bp = dev->priv;
+ flush_scheduled_work();
+
unregister_netdev(dev);
if (bp->regview)
@@ -5505,12 +5534,12 @@ bnx2_resume(struct pci_dev *pdev)
}
static struct pci_driver bnx2_pci_driver = {
- name: DRV_MODULE_NAME,
- id_table: bnx2_pci_tbl,
- probe: bnx2_init_one,
- remove: __devexit_p(bnx2_remove_one),
- suspend: bnx2_suspend,
- resume: bnx2_resume,
+ .name = DRV_MODULE_NAME,
+ .id_table = bnx2_pci_tbl,
+ .probe = bnx2_init_one,
+ .remove = __devexit_p(bnx2_remove_one),
+ .suspend = bnx2_suspend,
+ .resume = bnx2_resume,
};
static int __init bnx2_init(void)
diff --git a/drivers/net/bnx2.h b/drivers/net/bnx2.h
index 8214a2853d0..9ad3f5740cd 100644
--- a/drivers/net/bnx2.h
+++ b/drivers/net/bnx2.h
@@ -3841,12 +3841,12 @@ struct bnx2 {
struct status_block *status_blk;
u32 last_status_idx;
- atomic_t tx_avail_bd;
struct tx_bd *tx_desc_ring;
struct sw_bd *tx_buf_ring;
u32 tx_prod_bseq;
u16 tx_prod;
u16 tx_cons;
+ int tx_ring_size;
#ifdef BCM_VLAN
struct vlan_group *vlgrp;
@@ -3872,8 +3872,10 @@ struct bnx2 {
char *name;
int timer_interval;
+ int current_interval;
struct timer_list timer;
struct work_struct reset_task;
+ int in_reset_task;
/* Used to synchronize phy accesses. */
spinlock_t phy_lock;
@@ -3927,7 +3929,6 @@ struct bnx2 {
u16 fw_wr_seq;
u16 fw_drv_pulse_wr_seq;
- int tx_ring_size;
dma_addr_t tx_desc_mapping;
@@ -3985,7 +3986,7 @@ struct bnx2 {
#define PHY_LOOPBACK 2
u8 serdes_an_pending;
-#define SERDES_AN_TIMEOUT (2 * HZ)
+#define SERDES_AN_TIMEOUT (HZ / 3)
u8 mac_addr[8];
@@ -4171,6 +4172,9 @@ struct fw_info {
#define BNX2_PORT_HW_CFG_MAC_LOWER 0x00000054
#define BNX2_PORT_HW_CFG_CONFIG 0x00000058
+#define BNX2_PORT_HW_CFG_CFG_DFLT_LINK_MASK 0x001f0000
+#define BNX2_PORT_HW_CFG_CFG_DFLT_LINK_AN 0x00000000
+#define BNX2_PORT_HW_CFG_CFG_DFLT_LINK_1G 0x00030000
#define BNX2_PORT_HW_CFG_IMD_MAC_A_UPPER 0x00000068
#define BNX2_PORT_HW_CFG_IMD_MAC_A_LOWER 0x0000006c
diff --git a/drivers/net/bonding/bond_3ad.c b/drivers/net/bonding/bond_3ad.c
index a2e8dda5afa..d2f34d5a808 100644
--- a/drivers/net/bonding/bond_3ad.c
+++ b/drivers/net/bonding/bond_3ad.c
@@ -2419,22 +2419,19 @@ out:
return 0;
}
-int bond_3ad_lacpdu_recv(struct sk_buff *skb, struct net_device *dev, struct packet_type* ptype)
+int bond_3ad_lacpdu_recv(struct sk_buff *skb, struct net_device *dev, struct packet_type* ptype, struct net_device *orig_dev)
{
struct bonding *bond = dev->priv;
struct slave *slave = NULL;
int ret = NET_RX_DROP;
- if (!(dev->flags & IFF_MASTER)) {
+ if (!(dev->flags & IFF_MASTER))
goto out;
- }
read_lock(&bond->lock);
- slave = bond_get_slave_by_dev((struct bonding *)dev->priv,
- skb->real_dev);
- if (slave == NULL) {
+ slave = bond_get_slave_by_dev((struct bonding *)dev->priv, orig_dev);
+ if (!slave)
goto out_unlock;
- }
bond_3ad_rx_indication((struct lacpdu *) skb->data, slave, skb->len);
diff --git a/drivers/net/bonding/bond_3ad.h b/drivers/net/bonding/bond_3ad.h
index f4682389418..673a30af566 100644
--- a/drivers/net/bonding/bond_3ad.h
+++ b/drivers/net/bonding/bond_3ad.h
@@ -295,6 +295,6 @@ void bond_3ad_adapter_duplex_changed(struct slave *slave);
void bond_3ad_handle_link_change(struct slave *slave, char link);
int bond_3ad_get_active_agg_info(struct bonding *bond, struct ad_info *ad_info);
int bond_3ad_xmit_xor(struct sk_buff *skb, struct net_device *dev);
-int bond_3ad_lacpdu_recv(struct sk_buff *skb, struct net_device *dev, struct packet_type* ptype);
+int bond_3ad_lacpdu_recv(struct sk_buff *skb, struct net_device *dev, struct packet_type* ptype, struct net_device *orig_dev);
#endif //__BOND_3AD_H__
diff --git a/drivers/net/bonding/bond_alb.c b/drivers/net/bonding/bond_alb.c
index 5ce606d9dc0..f8fce396119 100644
--- a/drivers/net/bonding/bond_alb.c
+++ b/drivers/net/bonding/bond_alb.c
@@ -354,15 +354,14 @@ static void rlb_update_entry_from_arp(struct bonding *bond, struct arp_pkt *arp)
_unlock_rx_hashtbl(bond);
}
-static int rlb_arp_recv(struct sk_buff *skb, struct net_device *bond_dev, struct packet_type *ptype)
+static int rlb_arp_recv(struct sk_buff *skb, struct net_device *bond_dev, struct packet_type *ptype, struct net_device *orig_dev)
{
struct bonding *bond = bond_dev->priv;
struct arp_pkt *arp = (struct arp_pkt *)skb->data;
int res = NET_RX_DROP;
- if (!(bond_dev->flags & IFF_MASTER)) {
+ if (!(bond_dev->flags & IFF_MASTER))
goto out;
- }
if (!arp) {
dprintk("Packet has no ARP data\n");
@@ -1106,18 +1105,13 @@ static int alb_handle_addr_collision_on_attach(struct bonding *bond, struct slav
}
}
- if (found) {
- /* a slave was found that is using the mac address
- * of the new slave
- */
- printk(KERN_ERR DRV_NAME
- ": Error: the hw address of slave %s is not "
- "unique - cannot enslave it!",
- slave->dev->name);
- return -EINVAL;
- }
+ if (!found)
+ return 0;
- return 0;
+ /* Try setting slave mac to bond address and fall-through
+ to code handling that situation below... */
+ alb_set_slave_mac_addr(slave, bond->dev->dev_addr,
+ bond->alb_info.rlb_enabled);
}
/* The slave's address is equal to the address of the bond.
diff --git a/drivers/net/bonding/bond_main.c b/drivers/net/bonding/bond_main.c
index 2c930da90a8..94c9f68dd16 100644
--- a/drivers/net/bonding/bond_main.c
+++ b/drivers/net/bonding/bond_main.c
@@ -1604,6 +1604,44 @@ static int bond_sethwaddr(struct net_device *bond_dev, struct net_device *slave_
return 0;
}
+#define BOND_INTERSECT_FEATURES \
+ (NETIF_F_SG|NETIF_F_IP_CSUM|NETIF_F_NO_CSUM|NETIF_F_HW_CSUM)
+
+/*
+ * Compute the features available to the bonding device by
+ * intersection of all of the slave devices' BOND_INTERSECT_FEATURES.
+ * Call this after attaching or detaching a slave to update the
+ * bond's features.
+ */
+static int bond_compute_features(struct bonding *bond)
+{
+ int i;
+ struct slave *slave;
+ struct net_device *bond_dev = bond->dev;
+ int features = bond->bond_features;
+
+ bond_for_each_slave(bond, slave, i) {
+ struct net_device * slave_dev = slave->dev;
+ if (i == 0) {
+ features |= BOND_INTERSECT_FEATURES;
+ }
+ features &=
+ ~(~slave_dev->features & BOND_INTERSECT_FEATURES);
+ }
+
+ /* turn off NETIF_F_SG if we need a csum and h/w can't do it */
+ if ((features & NETIF_F_SG) &&
+ !(features & (NETIF_F_IP_CSUM |
+ NETIF_F_NO_CSUM |
+ NETIF_F_HW_CSUM))) {
+ features &= ~NETIF_F_SG;
+ }
+
+ bond_dev->features = features;
+
+ return 0;
+}
+
/* enslave device <slave> to bond device <master> */
static int bond_enslave(struct net_device *bond_dev, struct net_device *slave_dev)
{
@@ -1811,6 +1849,8 @@ static int bond_enslave(struct net_device *bond_dev, struct net_device *slave_de
new_slave->delay = 0;
new_slave->link_failure_count = 0;
+ bond_compute_features(bond);
+
if (bond->params.miimon && !bond->params.use_carrier) {
link_reporting = bond_check_dev_link(bond, slave_dev, 1);
@@ -2015,7 +2055,7 @@ err_free:
err_undo_flags:
bond_dev->features = old_features;
-
+
return res;
}
@@ -2100,6 +2140,8 @@ static int bond_release(struct net_device *bond_dev, struct net_device *slave_de
/* release the slave from its bond */
bond_detach_slave(bond, slave);
+ bond_compute_features(bond);
+
if (bond->primary_slave == slave) {
bond->primary_slave = NULL;
}
@@ -2243,6 +2285,8 @@ static int bond_release_all(struct net_device *bond_dev)
bond_alb_deinit_slave(bond, slave);
}
+ bond_compute_features(bond);
+
/* now that the slave is detached, unlock and perform
* all the undo steps that should not be called from
* within a lock.
@@ -3588,6 +3632,7 @@ static int bond_master_netdev_event(unsigned long event, struct net_device *bond
static int bond_slave_netdev_event(unsigned long event, struct net_device *slave_dev)
{
struct net_device *bond_dev = slave_dev->master;
+ struct bonding *bond = bond_dev->priv;
switch (event) {
case NETDEV_UNREGISTER:
@@ -3626,6 +3671,9 @@ static int bond_slave_netdev_event(unsigned long event, struct net_device *slave
* TODO: handle changing the primary's name
*/
break;
+ case NETDEV_FEAT_CHANGE:
+ bond_compute_features(bond);
+ break;
default:
break;
}
@@ -4526,6 +4574,11 @@ static inline void bond_set_mode_ops(struct bonding *bond, int mode)
}
}
+static struct ethtool_ops bond_ethtool_ops = {
+ .get_tx_csum = ethtool_op_get_tx_csum,
+ .get_sg = ethtool_op_get_sg,
+};
+
/*
* Does not allocate but creates a /proc entry.
* Allowed to fail.
@@ -4555,6 +4608,7 @@ static int __init bond_init(struct net_device *bond_dev, struct bond_params *par
bond_dev->stop = bond_close;
bond_dev->get_stats = bond_get_stats;
bond_dev->do_ioctl = bond_do_ioctl;
+ bond_dev->ethtool_ops = &bond_ethtool_ops;
bond_dev->set_multicast_list = bond_set_multicast_list;
bond_dev->change_mtu = bond_change_mtu;
bond_dev->set_mac_address = bond_set_mac_address;
@@ -4591,6 +4645,8 @@ static int __init bond_init(struct net_device *bond_dev, struct bond_params *par
NETIF_F_HW_VLAN_RX |
NETIF_F_HW_VLAN_FILTER);
+ bond->bond_features = bond_dev->features;
+
#ifdef CONFIG_PROC_FS
bond_create_proc_entry(bond);
#endif
diff --git a/drivers/net/bonding/bonding.h b/drivers/net/bonding/bonding.h
index d27f377b3ee..38819698086 100644
--- a/drivers/net/bonding/bonding.h
+++ b/drivers/net/bonding/bonding.h
@@ -211,6 +211,9 @@ struct bonding {
struct bond_params params;
struct list_head vlan_list;
struct vlan_group *vlgrp;
+ /* the features the bonding device supports, independently
+ * of any slaves */
+ int bond_features;
};
/**
diff --git a/drivers/net/chelsio/Makefile b/drivers/net/chelsio/Makefile
new file mode 100644
index 00000000000..91e927827c4
--- /dev/null
+++ b/drivers/net/chelsio/Makefile
@@ -0,0 +1,11 @@
+#
+# Chelsio 10Gb NIC driver for Linux.
+#
+
+obj-$(CONFIG_CHELSIO_T1) += cxgb.o
+
+EXTRA_CFLAGS += -I$(TOPDIR)/drivers/net/chelsio $(DEBUG_FLAGS)
+
+
+cxgb-objs := cxgb2.o espi.o pm3393.o sge.o subr.o mv88x201x.o
+
diff --git a/drivers/net/chelsio/common.h b/drivers/net/chelsio/common.h
new file mode 100644
index 00000000000..f09348802b4
--- /dev/null
+++ b/drivers/net/chelsio/common.h
@@ -0,0 +1,314 @@
+/*****************************************************************************
+ * *
+ * File: common.h *
+ * $Revision: 1.21 $ *
+ * $Date: 2005/06/22 00:43:25 $ *
+ * Description: *
+ * part of the Chelsio 10Gb Ethernet Driver. *
+ * *
+ * This program is free software; you can redistribute it and/or modify *
+ * it under the terms of the GNU General Public License, version 2, as *
+ * published by the Free Software Foundation. *
+ * *
+ * You should have received a copy of the GNU General Public License along *
+ * with this program; if not, write to the Free Software Foundation, Inc., *
+ * 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. *
+ * *
+ * THIS SOFTWARE IS PROVIDED ``AS IS'' AND WITHOUT ANY EXPRESS OR IMPLIED *
+ * WARRANTIES, INCLUDING, WITHOUT LIMITATION, THE IMPLIED WARRANTIES OF *
+ * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. *
+ * *
+ * http://www.chelsio.com *
+ * *
+ * Copyright (c) 2003 - 2005 Chelsio Communications, Inc. *
+ * All rights reserved. *
+ * *
+ * Maintainers: maintainers@chelsio.com *
+ * *
+ * Authors: Dimitrios Michailidis <dm@chelsio.com> *
+ * Tina Yang <tainay@chelsio.com> *
+ * Felix Marti <felix@chelsio.com> *
+ * Scott Bardone <sbardone@chelsio.com> *
+ * Kurt Ottaway <kottaway@chelsio.com> *
+ * Frank DiMambro <frank@chelsio.com> *
+ * *
+ * History: *
+ * *
+ ****************************************************************************/
+
+#ifndef _CXGB_COMMON_H_
+#define _CXGB_COMMON_H_
+
+#include <linux/config.h>
+#include <linux/module.h>
+#include <linux/netdevice.h>
+#include <linux/types.h>
+#include <linux/delay.h>
+#include <linux/pci.h>
+#include <linux/ethtool.h>
+#include <linux/mii.h>
+#include <linux/crc32.h>
+#include <linux/init.h>
+#include <asm/io.h>
+#include <linux/pci_ids.h>
+
+#define DRV_DESCRIPTION "Chelsio 10Gb Ethernet Driver"
+#define DRV_NAME "cxgb"
+#define DRV_VERSION "2.1.1"
+#define PFX DRV_NAME ": "
+
+#define CH_ERR(fmt, ...) printk(KERN_ERR PFX fmt, ## __VA_ARGS__)
+#define CH_WARN(fmt, ...) printk(KERN_WARNING PFX fmt, ## __VA_ARGS__)
+#define CH_ALERT(fmt, ...) printk(KERN_ALERT PFX fmt, ## __VA_ARGS__)
+
+#define CH_DEVICE(devid, ssid, idx) \
+ { PCI_VENDOR_ID_CHELSIO, devid, PCI_ANY_ID, ssid, 0, 0, idx }
+
+#define SUPPORTED_PAUSE (1 << 13)
+#define SUPPORTED_LOOPBACK (1 << 15)
+
+#define ADVERTISED_PAUSE (1 << 13)
+#define ADVERTISED_ASYM_PAUSE (1 << 14)
+
+typedef struct adapter adapter_t;
+
+void t1_elmer0_ext_intr(adapter_t *adapter);
+void t1_link_changed(adapter_t *adapter, int port_id, int link_status,
+ int speed, int duplex, int fc);
+
+struct t1_rx_mode {
+ struct net_device *dev;
+ u32 idx;
+ struct dev_mc_list *list;
+};
+
+#define t1_rx_mode_promisc(rm) (rm->dev->flags & IFF_PROMISC)
+#define t1_rx_mode_allmulti(rm) (rm->dev->flags & IFF_ALLMULTI)
+#define t1_rx_mode_mc_cnt(rm) (rm->dev->mc_count)
+
+static inline u8 *t1_get_next_mcaddr(struct t1_rx_mode *rm)
+{
+ u8 *addr = 0;
+
+ if (rm->idx++ < rm->dev->mc_count) {
+ addr = rm->list->dmi_addr;
+ rm->list = rm->list->next;
+ }
+ return addr;
+}
+
+#define MAX_NPORTS 4
+
+#define SPEED_INVALID 0xffff
+#define DUPLEX_INVALID 0xff
+
+enum {
+ CHBT_BOARD_N110,
+ CHBT_BOARD_N210
+};
+
+enum {
+ CHBT_TERM_T1,
+ CHBT_TERM_T2
+};
+
+enum {
+ CHBT_MAC_PM3393,
+};
+
+enum {
+ CHBT_PHY_88X2010,
+};
+
+enum {
+ PAUSE_RX = 1 << 0,
+ PAUSE_TX = 1 << 1,
+ PAUSE_AUTONEG = 1 << 2
+};
+
+/* Revisions of T1 chip */
+enum {
+ TERM_T1A = 0,
+ TERM_T1B = 1,
+ TERM_T2 = 3
+};
+
+struct sge_params {
+ unsigned int cmdQ_size[2];
+ unsigned int freelQ_size[2];
+ unsigned int large_buf_capacity;
+ unsigned int rx_coalesce_usecs;
+ unsigned int last_rx_coalesce_raw;
+ unsigned int default_rx_coalesce_usecs;
+ unsigned int sample_interval_usecs;
+ unsigned int coalesce_enable;
+ unsigned int polling;
+};
+
+struct chelsio_pci_params {
+ unsigned short speed;
+ unsigned char width;
+ unsigned char is_pcix;
+};
+
+struct adapter_params {
+ struct sge_params sge;
+ struct chelsio_pci_params pci;
+
+ const struct board_info *brd_info;
+
+ unsigned int nports; /* # of ethernet ports */
+ unsigned int stats_update_period;
+ unsigned short chip_revision;
+ unsigned char chip_version;
+};
+
+struct link_config {
+ unsigned int supported; /* link capabilities */
+ unsigned int advertising; /* advertised capabilities */
+ unsigned short requested_speed; /* speed user has requested */
+ unsigned short speed; /* actual link speed */
+ unsigned char requested_duplex; /* duplex user has requested */
+ unsigned char duplex; /* actual link duplex */
+ unsigned char requested_fc; /* flow control user has requested */
+ unsigned char fc; /* actual link flow control */
+ unsigned char autoneg; /* autonegotiating? */
+};
+
+struct cmac;
+struct cphy;
+
+struct port_info {
+ struct net_device *dev;
+ struct cmac *mac;
+ struct cphy *phy;
+ struct link_config link_config;
+ struct net_device_stats netstats;
+};
+
+struct sge;
+struct peespi;
+
+struct adapter {
+ u8 *regs;
+ struct pci_dev *pdev;
+ unsigned long registered_device_map;
+ unsigned long open_device_map;
+ unsigned long flags;
+
+ const char *name;
+ int msg_enable;
+ u32 mmio_len;
+
+ struct work_struct ext_intr_handler_task;
+ struct adapter_params params;
+
+ struct vlan_group *vlan_grp;
+
+ /* Terminator modules. */
+ struct sge *sge;
+ struct peespi *espi;
+
+ struct port_info port[MAX_NPORTS];
+ struct work_struct stats_update_task;
+ struct timer_list stats_update_timer;
+
+ struct semaphore mib_mutex;
+ spinlock_t tpi_lock;
+ spinlock_t work_lock;
+ /* guards async operations */
+ spinlock_t async_lock ____cacheline_aligned;
+ u32 slow_intr_mask;
+};
+
+enum { /* adapter flags */
+ FULL_INIT_DONE = 1 << 0,
+ TSO_CAPABLE = 1 << 2,
+ TCP_CSUM_CAPABLE = 1 << 3,
+ UDP_CSUM_CAPABLE = 1 << 4,
+ VLAN_ACCEL_CAPABLE = 1 << 5,
+ RX_CSUM_ENABLED = 1 << 6,
+};
+
+struct mdio_ops;
+struct gmac;
+struct gphy;
+
+struct board_info {
+ unsigned char board;
+ unsigned char port_number;
+ unsigned long caps;
+ unsigned char chip_term;
+ unsigned char chip_mac;
+ unsigned char chip_phy;
+ unsigned int clock_core;
+ unsigned int clock_mc3;
+ unsigned int clock_mc4;
+ unsigned int espi_nports;
+ unsigned int clock_cspi;
+ unsigned int clock_elmer0;
+ unsigned char mdio_mdien;
+ unsigned char mdio_mdiinv;
+ unsigned char mdio_mdc;
+ unsigned char mdio_phybaseaddr;
+ struct gmac *gmac;
+ struct gphy *gphy;
+ struct mdio_ops *mdio_ops;
+ const char *desc;
+};
+
+extern struct pci_device_id t1_pci_tbl[];
+
+static inline int adapter_matches_type(const adapter_t *adapter,
+ int version, int revision)
+{
+ return adapter->params.chip_version == version &&
+ adapter->params.chip_revision == revision;
+}
+
+#define t1_is_T1B(adap) adapter_matches_type(adap, CHBT_TERM_T1, TERM_T1B)
+#define is_T2(adap) adapter_matches_type(adap, CHBT_TERM_T2, TERM_T2)
+
+/* Returns true if an adapter supports VLAN acceleration and TSO */
+static inline int vlan_tso_capable(const adapter_t *adapter)
+{
+ return !t1_is_T1B(adapter);
+}
+
+#define for_each_port(adapter, iter) \
+ for (iter = 0; iter < (adapter)->params.nports; ++iter)
+
+#define board_info(adapter) ((adapter)->params.brd_info)
+#define is_10G(adapter) (board_info(adapter)->caps & SUPPORTED_10000baseT_Full)
+
+static inline unsigned int core_ticks_per_usec(const adapter_t *adap)
+{
+ return board_info(adap)->clock_core / 1000000;
+}
+
+extern int t1_tpi_write(adapter_t *adapter, u32 addr, u32 value);
+extern int t1_tpi_read(adapter_t *adapter, u32 addr, u32 *value);
+
+extern void t1_interrupts_enable(adapter_t *adapter);
+extern void t1_interrupts_disable(adapter_t *adapter);
+extern void t1_interrupts_clear(adapter_t *adapter);
+extern int elmer0_ext_intr_handler(adapter_t *adapter);
+extern int t1_slow_intr_handler(adapter_t *adapter);
+
+extern int t1_link_start(struct cphy *phy, struct cmac *mac, struct link_config *lc);
+extern const struct board_info *t1_get_board_info(unsigned int board_id);
+extern const struct board_info *t1_get_board_info_from_ids(unsigned int devid,
+ unsigned short ssid);
+extern int t1_seeprom_read(adapter_t *adapter, u32 addr, u32 *data);
+extern int t1_get_board_rev(adapter_t *adapter, const struct board_info *bi,
+ struct adapter_params *p);
+extern int t1_init_hw_modules(adapter_t *adapter);
+extern int t1_init_sw_modules(adapter_t *adapter, const struct board_info *bi);
+extern void t1_free_sw_modules(adapter_t *adapter);
+extern void t1_fatal_err(adapter_t *adapter);
+
+extern void t1_tp_set_udp_checksum_offload(adapter_t *adapter, int enable);
+extern void t1_tp_set_tcp_checksum_offload(adapter_t *adapter, int enable);
+extern void t1_tp_set_ip_checksum_offload(adapter_t *adapter, int enable);
+
+#endif /* _CXGB_COMMON_H_ */
diff --git a/drivers/net/chelsio/cphy.h b/drivers/net/chelsio/cphy.h
new file mode 100644
index 00000000000..3412342f734
--- /dev/null
+++ b/drivers/net/chelsio/cphy.h
@@ -0,0 +1,148 @@
+/*****************************************************************************
+ * *
+ * File: cphy.h *
+ * $Revision: 1.7 $ *
+ * $Date: 2005/06/21 18:29:47 $ *
+ * Description: *
+ * part of the Chelsio 10Gb Ethernet Driver. *
+ * *
+ * This program is free software; you can redistribute it and/or modify *
+ * it under the terms of the GNU General Public License, version 2, as *
+ * published by the Free Software Foundation. *
+ * *
+ * You should have received a copy of the GNU General Public License along *
+ * with this program; if not, write to the Free Software Foundation, Inc., *
+ * 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. *
+ * *
+ * THIS SOFTWARE IS PROVIDED ``AS IS'' AND WITHOUT ANY EXPRESS OR IMPLIED *
+ * WARRANTIES, INCLUDING, WITHOUT LIMITATION, THE IMPLIED WARRANTIES OF *
+ * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. *
+ * *
+ * http://www.chelsio.com *
+ * *
+ * Copyright (c) 2003 - 2005 Chelsio Communications, Inc. *
+ * All rights reserved. *
+ * *
+ * Maintainers: maintainers@chelsio.com *
+ * *
+ * Authors: Dimitrios Michailidis <dm@chelsio.com> *
+ * Tina Yang <tainay@chelsio.com> *
+ * Felix Marti <felix@chelsio.com> *
+ * Scott Bardone <sbardone@chelsio.com> *
+ * Kurt Ottaway <kottaway@chelsio.com> *
+ * Frank DiMambro <frank@chelsio.com> *
+ * *
+ * History: *
+ * *
+ ****************************************************************************/
+
+#ifndef _CXGB_CPHY_H_
+#define _CXGB_CPHY_H_
+
+#include "common.h"
+
+struct mdio_ops {
+ void (*init)(adapter_t *adapter, const struct board_info *bi);
+ int (*read)(adapter_t *adapter, int phy_addr, int mmd_addr,
+ int reg_addr, unsigned int *val);
+ int (*write)(adapter_t *adapter, int phy_addr, int mmd_addr,
+ int reg_addr, unsigned int val);
+};
+
+/* PHY interrupt types */
+enum {
+ cphy_cause_link_change = 0x1,
+ cphy_cause_error = 0x2
+};
+
+struct cphy;
+
+/* PHY operations */
+struct cphy_ops {
+ void (*destroy)(struct cphy *);
+ int (*reset)(struct cphy *, int wait);
+
+ int (*interrupt_enable)(struct cphy *);
+ int (*interrupt_disable)(struct cphy *);
+ int (*interrupt_clear)(struct cphy *);
+ int (*interrupt_handler)(struct cphy *);
+
+ int (*autoneg_enable)(struct cphy *);
+ int (*autoneg_disable)(struct cphy *);
+ int (*autoneg_restart)(struct cphy *);
+
+ int (*advertise)(struct cphy *phy, unsigned int advertise_map);
+ int (*set_loopback)(struct cphy *, int on);
+ int (*set_speed_duplex)(struct cphy *phy, int speed, int duplex);
+ int (*get_link_status)(struct cphy *phy, int *link_ok, int *speed,
+ int *duplex, int *fc);
+};
+
+/* A PHY instance */
+struct cphy {
+ int addr; /* PHY address */
+ adapter_t *adapter; /* associated adapter */
+ struct cphy_ops *ops; /* PHY operations */
+ int (*mdio_read)(adapter_t *adapter, int phy_addr, int mmd_addr,
+ int reg_addr, unsigned int *val);
+ int (*mdio_write)(adapter_t *adapter, int phy_addr, int mmd_addr,
+ int reg_addr, unsigned int val);
+ struct cphy_instance *instance;
+};
+
+/* Convenience MDIO read/write wrappers */
+static inline int mdio_read(struct cphy *cphy, int mmd, int reg,
+ unsigned int *valp)
+{
+ return cphy->mdio_read(cphy->adapter, cphy->addr, mmd, reg, valp);
+}
+
+static inline int mdio_write(struct cphy *cphy, int mmd, int reg,
+ unsigned int val)
+{
+ return cphy->mdio_write(cphy->adapter, cphy->addr, mmd, reg, val);
+}
+
+static inline int simple_mdio_read(struct cphy *cphy, int reg,
+ unsigned int *valp)
+{
+ return mdio_read(cphy, 0, reg, valp);
+}
+
+static inline int simple_mdio_write(struct cphy *cphy, int reg,
+ unsigned int val)
+{
+ return mdio_write(cphy, 0, reg, val);
+}
+
+/* Convenience initializer */
+static inline void cphy_init(struct cphy *phy, adapter_t *adapter,
+ int phy_addr, struct cphy_ops *phy_ops,
+ struct mdio_ops *mdio_ops)
+{
+ phy->adapter = adapter;
+ phy->addr = phy_addr;
+ phy->ops = phy_ops;
+ if (mdio_ops) {
+ phy->mdio_read = mdio_ops->read;
+ phy->mdio_write = mdio_ops->write;
+ }
+}
+
+/* Operations of the PHY-instance factory */
+struct gphy {
+ /* Construct a PHY instance with the given PHY address */
+ struct cphy *(*create)(adapter_t *adapter, int phy_addr,
+ struct mdio_ops *mdio_ops);
+
+ /*
+ * Reset the PHY chip. This resets the whole PHY chip, not individual
+ * ports.
+ */
+ int (*reset)(adapter_t *adapter);
+};
+
+extern struct gphy t1_mv88x201x_ops;
+extern struct gphy t1_dummy_phy_ops;
+
+#endif /* _CXGB_CPHY_H_ */
diff --git a/drivers/net/chelsio/cpl5_cmd.h b/drivers/net/chelsio/cpl5_cmd.h
new file mode 100644
index 00000000000..27925e487bc
--- /dev/null
+++ b/drivers/net/chelsio/cpl5_cmd.h
@@ -0,0 +1,145 @@
+/*****************************************************************************
+ * *
+ * File: cpl5_cmd.h *
+ * $Revision: 1.6 $ *
+ * $Date: 2005/06/21 18:29:47 $ *
+ * Description: *
+ * part of the Chelsio 10Gb Ethernet Driver. *
+ * *
+ * This program is free software; you can redistribute it and/or modify *
+ * it under the terms of the GNU General Public License, version 2, as *
+ * published by the Free Software Foundation. *
+ * *
+ * You should have received a copy of the GNU General Public License along *
+ * with this program; if not, write to the Free Software Foundation, Inc., *
+ * 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. *
+ * *
+ * THIS SOFTWARE IS PROVIDED ``AS IS'' AND WITHOUT ANY EXPRESS OR IMPLIED *
+ * WARRANTIES, INCLUDING, WITHOUT LIMITATION, THE IMPLIED WARRANTIES OF *
+ * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. *
+ * *
+ * http://www.chelsio.com *
+ * *
+ * Copyright (c) 2003 - 2005 Chelsio Communications, Inc. *
+ * All rights reserved. *
+ * *
+ * Maintainers: maintainers@chelsio.com *
+ * *
+ * Authors: Dimitrios Michailidis <dm@chelsio.com> *
+ * Tina Yang <tainay@chelsio.com> *
+ * Felix Marti <felix@chelsio.com> *
+ * Scott Bardone <sbardone@chelsio.com> *
+ * Kurt Ottaway <kottaway@chelsio.com> *
+ * Frank DiMambro <frank@chelsio.com> *
+ * *
+ * History: *
+ * *
+ ****************************************************************************/
+
+#ifndef _CXGB_CPL5_CMD_H_
+#define _CXGB_CPL5_CMD_H_
+
+#include <asm/byteorder.h>
+
+#if !defined(__LITTLE_ENDIAN_BITFIELD) && !defined(__BIG_ENDIAN_BITFIELD)
+#error "Adjust your <asm/byteorder.h> defines"
+#endif
+
+enum CPL_opcode {
+ CPL_RX_PKT = 0xAD,
+ CPL_TX_PKT = 0xB2,
+ CPL_TX_PKT_LSO = 0xB6,
+};
+
+enum { /* TX_PKT_LSO ethernet types */
+ CPL_ETH_II,
+ CPL_ETH_II_VLAN,
+ CPL_ETH_802_3,
+ CPL_ETH_802_3_VLAN
+};
+
+struct cpl_rx_data {
+ u32 rsvd0;
+ u32 len;
+ u32 seq;
+ u16 urg;
+ u8 rsvd1;
+ u8 status;
+};
+
+/*
+ * We want this header's alignment to be no more stringent than 2-byte aligned.
+ * All fields are u8 or u16 except for the length. However that field is not
+ * used so we break it into 2 16-bit parts to easily meet our alignment needs.
+ */
+struct cpl_tx_pkt {
+ u8 opcode;
+#if defined(__LITTLE_ENDIAN_BITFIELD)
+ u8 iff:4;
+ u8 ip_csum_dis:1;
+ u8 l4_csum_dis:1;
+ u8 vlan_valid:1;
+ u8 rsvd:1;
+#else
+ u8 rsvd:1;
+ u8 vlan_valid:1;
+ u8 l4_csum_dis:1;
+ u8 ip_csum_dis:1;
+ u8 iff:4;
+#endif
+ u16 vlan;
+ u16 len_hi;
+ u16 len_lo;
+};
+
+struct cpl_tx_pkt_lso {
+ u8 opcode;
+#if defined(__LITTLE_ENDIAN_BITFIELD)
+ u8 iff:4;
+ u8 ip_csum_dis:1;
+ u8 l4_csum_dis:1;
+ u8 vlan_valid:1;
+ u8 rsvd:1;
+#else
+ u8 rsvd:1;
+ u8 vlan_valid:1;
+ u8 l4_csum_dis:1;
+ u8 ip_csum_dis:1;
+ u8 iff:4;
+#endif
+ u16 vlan;
+ u32 len;
+
+ u32 rsvd2;
+ u8 rsvd3;
+#if defined(__LITTLE_ENDIAN_BITFIELD)
+ u8 tcp_hdr_words:4;
+ u8 ip_hdr_words:4;
+#else
+ u8 ip_hdr_words:4;
+ u8 tcp_hdr_words:4;
+#endif
+ u16 eth_type_mss;
+};
+
+struct cpl_rx_pkt {
+ u8 opcode;
+#if defined(__LITTLE_ENDIAN_BITFIELD)
+ u8 iff:4;
+ u8 csum_valid:1;
+ u8 bad_pkt:1;
+ u8 vlan_valid:1;
+ u8 rsvd:1;
+#else
+ u8 rsvd:1;
+ u8 vlan_valid:1;
+ u8 bad_pkt:1;
+ u8 csum_valid:1;
+ u8 iff:4;
+#endif
+ u16 csum;
+ u16 vlan;
+ u16 len;
+};
+
+#endif /* _CXGB_CPL5_CMD_H_ */
diff --git a/drivers/net/chelsio/cxgb2.c b/drivers/net/chelsio/cxgb2.c
new file mode 100644
index 00000000000..28ae478b386
--- /dev/null
+++ b/drivers/net/chelsio/cxgb2.c
@@ -0,0 +1,1256 @@
+/*****************************************************************************
+ * *
+ * File: cxgb2.c *
+ * $Revision: 1.25 $ *
+ * $Date: 2005/06/22 00:43:25 $ *
+ * Description: *
+ * Chelsio 10Gb Ethernet Driver. *
+ * *
+ * This program is free software; you can redistribute it and/or modify *
+ * it under the terms of the GNU General Public License, version 2, as *
+ * published by the Free Software Foundation. *
+ * *
+ * You should have received a copy of the GNU General Public License along *
+ * with this program; if not, write to the Free Software Foundation, Inc., *
+ * 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. *
+ * *
+ * THIS SOFTWARE IS PROVIDED ``AS IS'' AND WITHOUT ANY EXPRESS OR IMPLIED *
+ * WARRANTIES, INCLUDING, WITHOUT LIMITATION, THE IMPLIED WARRANTIES OF *
+ * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. *
+ * *
+ * http://www.chelsio.com *
+ * *
+ * Copyright (c) 2003 - 2005 Chelsio Communications, Inc. *
+ * All rights reserved. *
+ * *
+ * Maintainers: maintainers@chelsio.com *
+ * *
+ * Authors: Dimitrios Michailidis <dm@chelsio.com> *
+ * Tina Yang <tainay@chelsio.com> *
+ * Felix Marti <felix@chelsio.com> *
+ * Scott Bardone <sbardone@chelsio.com> *
+ * Kurt Ottaway <kottaway@chelsio.com> *
+ * Frank DiMambro <frank@chelsio.com> *
+ * *
+ * History: *
+ * *
+ ****************************************************************************/
+
+#include "common.h"
+#include <linux/config.h>
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/pci.h>
+#include <linux/netdevice.h>
+#include <linux/etherdevice.h>
+#include <linux/if_vlan.h>
+#include <linux/mii.h>
+#include <linux/sockios.h>
+#include <linux/proc_fs.h>
+#include <linux/dma-mapping.h>
+#include <asm/uaccess.h>
+
+#include "cpl5_cmd.h"
+#include "regs.h"
+#include "gmac.h"
+#include "cphy.h"
+#include "sge.h"
+#include "espi.h"
+
+#ifdef work_struct
+#include <linux/tqueue.h>
+#define INIT_WORK INIT_TQUEUE
+#define schedule_work schedule_task
+#define flush_scheduled_work flush_scheduled_tasks
+
+static inline void schedule_mac_stats_update(struct adapter *ap, int secs)
+{
+ mod_timer(&ap->stats_update_timer, jiffies + secs * HZ);
+}
+
+static inline void cancel_mac_stats_update(struct adapter *ap)
+{
+ del_timer_sync(&ap->stats_update_timer);
+ flush_scheduled_tasks();
+}
+
+/*
+ * Stats update timer for 2.4. It schedules a task to do the actual update as
+ * we need to access MAC statistics in process context.
+ */
+static void mac_stats_timer(unsigned long data)
+{
+ struct adapter *ap = (struct adapter *)data;
+
+ schedule_task(&ap->stats_update_task);
+}
+#else
+#include <linux/workqueue.h>
+
+static inline void schedule_mac_stats_update(struct adapter *ap, int secs)
+{
+ schedule_delayed_work(&ap->stats_update_task, secs * HZ);
+}
+
+static inline void cancel_mac_stats_update(struct adapter *ap)
+{
+ cancel_delayed_work(&ap->stats_update_task);
+}
+#endif
+
+#define MAX_CMDQ_ENTRIES 16384
+#define MAX_CMDQ1_ENTRIES 1024
+#define MAX_RX_BUFFERS 16384
+#define MAX_RX_JUMBO_BUFFERS 16384
+#define MAX_TX_BUFFERS_HIGH 16384U
+#define MAX_TX_BUFFERS_LOW 1536U
+#define MIN_FL_ENTRIES 32
+
+#define PORT_MASK ((1 << MAX_NPORTS) - 1)
+
+#define DFLT_MSG_ENABLE (NETIF_MSG_DRV | NETIF_MSG_PROBE | NETIF_MSG_LINK | \
+ NETIF_MSG_TIMER | NETIF_MSG_IFDOWN | NETIF_MSG_IFUP |\
+ NETIF_MSG_RX_ERR | NETIF_MSG_TX_ERR)
+
+/*
+ * The EEPROM is actually bigger but only the first few bytes are used so we
+ * only report those.
+ */
+#define EEPROM_SIZE 32
+
+MODULE_DESCRIPTION(DRV_DESCRIPTION);
+MODULE_AUTHOR("Chelsio Communications");
+MODULE_LICENSE("GPL");
+
+static int dflt_msg_enable = DFLT_MSG_ENABLE;
+
+MODULE_PARM(dflt_msg_enable, "i");
+MODULE_PARM_DESC(dflt_msg_enable, "Chelsio T1 message enable bitmap");
+
+
+static const char pci_speed[][4] = {
+ "33", "66", "100", "133"
+};
+
+/*
+ * Setup MAC to receive the types of packets we want.
+ */
+static void t1_set_rxmode(struct net_device *dev)
+{
+ struct adapter *adapter = dev->priv;
+ struct cmac *mac = adapter->port[dev->if_port].mac;
+ struct t1_rx_mode rm;
+
+ rm.dev = dev;
+ rm.idx = 0;
+ rm.list = dev->mc_list;
+ mac->ops->set_rx_mode(mac, &rm);
+}
+
+static void link_report(struct port_info *p)
+{
+ if (!netif_carrier_ok(p->dev))
+ printk(KERN_INFO "%s: link down\n", p->dev->name);
+ else {
+ const char *s = "10Mbps";
+
+ switch (p->link_config.speed) {
+ case SPEED_10000: s = "10Gbps"; break;
+ case SPEED_1000: s = "1000Mbps"; break;
+ case SPEED_100: s = "100Mbps"; break;
+ }
+
+ printk(KERN_INFO "%s: link up, %s, %s-duplex\n",
+ p->dev->name, s,
+ p->link_config.duplex == DUPLEX_FULL ? "full" : "half");
+ }
+}
+
+void t1_link_changed(struct adapter *adapter, int port_id, int link_stat,
+ int speed, int duplex, int pause)
+{
+ struct port_info *p = &adapter->port[port_id];
+
+ if (link_stat != netif_carrier_ok(p->dev)) {
+ if (link_stat)
+ netif_carrier_on(p->dev);
+ else
+ netif_carrier_off(p->dev);
+ link_report(p);
+
+ }
+}
+
+static void link_start(struct port_info *p)
+{
+ struct cmac *mac = p->mac;
+
+ mac->ops->reset(mac);
+ if (mac->ops->macaddress_set)
+ mac->ops->macaddress_set(mac, p->dev->dev_addr);
+ t1_set_rxmode(p->dev);
+ t1_link_start(p->phy, mac, &p->link_config);
+ mac->ops->enable(mac, MAC_DIRECTION_RX | MAC_DIRECTION_TX);
+}
+
+static void enable_hw_csum(struct adapter *adapter)
+{
+ if (adapter->flags & TSO_CAPABLE)
+ t1_tp_set_ip_checksum_offload(adapter, 1); /* for TSO only */
+ t1_tp_set_tcp_checksum_offload(adapter, 1);
+}
+
+/*
+ * Things to do upon first use of a card.
+ * This must run with the rtnl lock held.
+ */
+static int cxgb_up(struct adapter *adapter)
+{
+ int err = 0;
+
+ if (!(adapter->flags & FULL_INIT_DONE)) {
+ err = t1_init_hw_modules(adapter);
+ if (err)
+ goto out_err;
+
+ enable_hw_csum(adapter);
+ adapter->flags |= FULL_INIT_DONE;
+ }
+
+ t1_interrupts_clear(adapter);
+ if ((err = request_irq(adapter->pdev->irq,
+ t1_select_intr_handler(adapter), SA_SHIRQ,
+ adapter->name, adapter))) {
+ goto out_err;
+ }
+ t1_sge_start(adapter->sge);
+ t1_interrupts_enable(adapter);
+ out_err:
+ return err;
+}
+
+/*
+ * Release resources when all the ports have been stopped.
+ */
+static void cxgb_down(struct adapter *adapter)
+{
+ t1_sge_stop(adapter->sge);
+ t1_interrupts_disable(adapter);
+ free_irq(adapter->pdev->irq, adapter);
+}
+
+static int cxgb_open(struct net_device *dev)
+{
+ int err;
+ struct adapter *adapter = dev->priv;
+ int other_ports = adapter->open_device_map & PORT_MASK;
+
+ if (!adapter->open_device_map && (err = cxgb_up(adapter)) < 0)
+ return err;
+
+ __set_bit(dev->if_port, &adapter->open_device_map);
+ link_start(&adapter->port[dev->if_port]);
+ netif_start_queue(dev);
+ if (!other_ports && adapter->params.stats_update_period)
+ schedule_mac_stats_update(adapter,
+ adapter->params.stats_update_period);
+ return 0;
+}
+
+static int cxgb_close(struct net_device *dev)
+{
+ struct adapter *adapter = dev->priv;
+ struct port_info *p = &adapter->port[dev->if_port];
+ struct cmac *mac = p->mac;
+
+ netif_stop_queue(dev);
+ mac->ops->disable(mac, MAC_DIRECTION_TX | MAC_DIRECTION_RX);
+ netif_carrier_off(dev);
+
+ clear_bit(dev->if_port, &adapter->open_device_map);
+ if (adapter->params.stats_update_period &&
+ !(adapter->open_device_map & PORT_MASK)) {
+ /* Stop statistics accumulation. */
+ smp_mb__after_clear_bit();
+ spin_lock(&adapter->work_lock); /* sync with update task */
+ spin_unlock(&adapter->work_lock);
+ cancel_mac_stats_update(adapter);
+ }
+
+ if (!adapter->open_device_map)
+ cxgb_down(adapter);
+ return 0;
+}
+
+static struct net_device_stats *t1_get_stats(struct net_device *dev)
+{
+ struct adapter *adapter = dev->priv;
+ struct port_info *p = &adapter->port[dev->if_port];
+ struct net_device_stats *ns = &p->netstats;
+ const struct cmac_statistics *pstats;
+
+ /* Do a full update of the MAC stats */
+ pstats = p->mac->ops->statistics_update(p->mac,
+ MAC_STATS_UPDATE_FULL);
+
+ ns->tx_packets = pstats->TxUnicastFramesOK +
+ pstats->TxMulticastFramesOK + pstats->TxBroadcastFramesOK;
+
+ ns->rx_packets = pstats->RxUnicastFramesOK +
+ pstats->RxMulticastFramesOK + pstats->RxBroadcastFramesOK;
+
+ ns->tx_bytes = pstats->TxOctetsOK;
+ ns->rx_bytes = pstats->RxOctetsOK;
+
+ ns->tx_errors = pstats->TxLateCollisions + pstats->TxLengthErrors +
+ pstats->TxUnderrun + pstats->TxFramesAbortedDueToXSCollisions;
+ ns->rx_errors = pstats->RxDataErrors + pstats->RxJabberErrors +
+ pstats->RxFCSErrors + pstats->RxAlignErrors +
+ pstats->RxSequenceErrors + pstats->RxFrameTooLongErrors +
+ pstats->RxSymbolErrors + pstats->RxRuntErrors;
+
+ ns->multicast = pstats->RxMulticastFramesOK;
+ ns->collisions = pstats->TxTotalCollisions;
+
+ /* detailed rx_errors */
+ ns->rx_length_errors = pstats->RxFrameTooLongErrors +
+ pstats->RxJabberErrors;
+ ns->rx_over_errors = 0;
+ ns->rx_crc_errors = pstats->RxFCSErrors;
+ ns->rx_frame_errors = pstats->RxAlignErrors;
+ ns->rx_fifo_errors = 0;
+ ns->rx_missed_errors = 0;
+
+ /* detailed tx_errors */
+ ns->tx_aborted_errors = pstats->TxFramesAbortedDueToXSCollisions;
+ ns->tx_carrier_errors = 0;
+ ns->tx_fifo_errors = pstats->TxUnderrun;
+ ns->tx_heartbeat_errors = 0;
+ ns->tx_window_errors = pstats->TxLateCollisions;
+ return ns;
+}
+
+static u32 get_msglevel(struct net_device *dev)
+{
+ struct adapter *adapter = dev->priv;
+
+ return adapter->msg_enable;
+}
+
+static void set_msglevel(struct net_device *dev, u32 val)
+{
+ struct adapter *adapter = dev->priv;
+
+ adapter->msg_enable = val;
+}
+
+static char stats_strings[][ETH_GSTRING_LEN] = {
+ "TxOctetsOK",
+ "TxOctetsBad",
+ "TxUnicastFramesOK",
+ "TxMulticastFramesOK",
+ "TxBroadcastFramesOK",
+ "TxPauseFrames",
+ "TxFramesWithDeferredXmissions",
+ "TxLateCollisions",
+ "TxTotalCollisions",
+ "TxFramesAbortedDueToXSCollisions",
+ "TxUnderrun",
+ "TxLengthErrors",
+ "TxInternalMACXmitError",
+ "TxFramesWithExcessiveDeferral",
+ "TxFCSErrors",
+
+ "RxOctetsOK",
+ "RxOctetsBad",
+ "RxUnicastFramesOK",
+ "RxMulticastFramesOK",
+ "RxBroadcastFramesOK",
+ "RxPauseFrames",
+ "RxFCSErrors",
+ "RxAlignErrors",
+ "RxSymbolErrors",
+ "RxDataErrors",
+ "RxSequenceErrors",
+ "RxRuntErrors",
+ "RxJabberErrors",
+ "RxInternalMACRcvError",
+ "RxInRangeLengthErrors",
+ "RxOutOfRangeLengthField",
+ "RxFrameTooLongErrors",
+
+ "TSO",
+ "VLANextractions",
+ "VLANinsertions",
+ "RxCsumGood",
+ "TxCsumOffload",
+ "RxDrops"
+
+ "respQ_empty",
+ "respQ_overflow",
+ "freelistQ_empty",
+ "pkt_too_big",
+ "pkt_mismatch",
+ "cmdQ_full0",
+ "cmdQ_full1",
+ "tx_ipfrags",
+ "tx_reg_pkts",
+ "tx_lso_pkts",
+ "tx_do_cksum",
+
+ "espi_DIP2ParityErr",
+ "espi_DIP4Err",
+ "espi_RxDrops",
+ "espi_TxDrops",
+ "espi_RxOvfl",
+ "espi_ParityErr"
+};
+
+#define T2_REGMAP_SIZE (3 * 1024)
+
+static int get_regs_len(struct net_device *dev)
+{
+ return T2_REGMAP_SIZE;
+}
+
+static void get_drvinfo(struct net_device *dev, struct ethtool_drvinfo *info)
+{
+ struct adapter *adapter = dev->priv;
+
+ strcpy(info->driver, DRV_NAME);
+ strcpy(info->version, DRV_VERSION);
+ strcpy(info->fw_version, "N/A");
+ strcpy(info->bus_info, pci_name(adapter->pdev));
+}
+
+static int get_stats_count(struct net_device *dev)
+{
+ return ARRAY_SIZE(stats_strings);
+}
+
+static void get_strings(struct net_device *dev, u32 stringset, u8 *data)
+{
+ if (stringset == ETH_SS_STATS)
+ memcpy(data, stats_strings, sizeof(stats_strings));
+}
+
+static void get_stats(struct net_device *dev, struct ethtool_stats *stats,
+ u64 *data)
+{
+ struct adapter *adapter = dev->priv;
+ struct cmac *mac = adapter->port[dev->if_port].mac;
+ const struct cmac_statistics *s;
+ const struct sge_port_stats *ss;
+ const struct sge_intr_counts *t;
+
+ s = mac->ops->statistics_update(mac, MAC_STATS_UPDATE_FULL);
+ ss = t1_sge_get_port_stats(adapter->sge, dev->if_port);
+ t = t1_sge_get_intr_counts(adapter->sge);
+
+ *data++ = s->TxOctetsOK;
+ *data++ = s->TxOctetsBad;
+ *data++ = s->TxUnicastFramesOK;
+ *data++ = s->TxMulticastFramesOK;
+ *data++ = s->TxBroadcastFramesOK;
+ *data++ = s->TxPauseFrames;
+ *data++ = s->TxFramesWithDeferredXmissions;
+ *data++ = s->TxLateCollisions;
+ *data++ = s->TxTotalCollisions;
+ *data++ = s->TxFramesAbortedDueToXSCollisions;
+ *data++ = s->TxUnderrun;
+ *data++ = s->TxLengthErrors;
+ *data++ = s->TxInternalMACXmitError;
+ *data++ = s->TxFramesWithExcessiveDeferral;
+ *data++ = s->TxFCSErrors;
+
+ *data++ = s->RxOctetsOK;
+ *data++ = s->RxOctetsBad;
+ *data++ = s->RxUnicastFramesOK;
+ *data++ = s->RxMulticastFramesOK;
+ *data++ = s->RxBroadcastFramesOK;
+ *data++ = s->RxPauseFrames;
+ *data++ = s->RxFCSErrors;
+ *data++ = s->RxAlignErrors;
+ *data++ = s->RxSymbolErrors;
+ *data++ = s->RxDataErrors;
+ *data++ = s->RxSequenceErrors;
+ *data++ = s->RxRuntErrors;
+ *data++ = s->RxJabberErrors;
+ *data++ = s->RxInternalMACRcvError;
+ *data++ = s->RxInRangeLengthErrors;
+ *data++ = s->RxOutOfRangeLengthField;
+ *data++ = s->RxFrameTooLongErrors;
+
+ *data++ = ss->tso;
+ *data++ = ss->vlan_xtract;
+ *data++ = ss->vlan_insert;
+ *data++ = ss->rx_cso_good;
+ *data++ = ss->tx_cso;
+ *data++ = ss->rx_drops;
+
+ *data++ = (u64)t->respQ_empty;
+ *data++ = (u64)t->respQ_overflow;
+ *data++ = (u64)t->freelistQ_empty;
+ *data++ = (u64)t->pkt_too_big;
+ *data++ = (u64)t->pkt_mismatch;
+ *data++ = (u64)t->cmdQ_full[0];
+ *data++ = (u64)t->cmdQ_full[1];
+ *data++ = (u64)t->tx_ipfrags;
+ *data++ = (u64)t->tx_reg_pkts;
+ *data++ = (u64)t->tx_lso_pkts;
+ *data++ = (u64)t->tx_do_cksum;
+}
+
+static inline void reg_block_dump(struct adapter *ap, void *buf,
+ unsigned int start, unsigned int end)
+{
+ u32 *p = buf + start;
+
+ for ( ; start <= end; start += sizeof(u32))
+ *p++ = readl(ap->regs + start);
+}
+
+static void get_regs(struct net_device *dev, struct ethtool_regs *regs,
+ void *buf)
+{
+ struct adapter *ap = dev->priv;
+
+ /*
+ * Version scheme: bits 0..9: chip version, bits 10..15: chip revision
+ */
+ regs->version = 2;
+
+ memset(buf, 0, T2_REGMAP_SIZE);
+ reg_block_dump(ap, buf, 0, A_SG_RESPACCUTIMER);
+}
+
+static int get_settings(struct net_device *dev, struct ethtool_cmd *cmd)
+{
+ struct adapter *adapter = dev->priv;
+ struct port_info *p = &adapter->port[dev->if_port];
+
+ cmd->supported = p->link_config.supported;
+ cmd->advertising = p->link_config.advertising;
+
+ if (netif_carrier_ok(dev)) {
+ cmd->speed = p->link_config.speed;
+ cmd->duplex = p->link_config.duplex;
+ } else {
+ cmd->speed = -1;
+ cmd->duplex = -1;
+ }
+
+ cmd->port = (cmd->supported & SUPPORTED_TP) ? PORT_TP : PORT_FIBRE;
+ cmd->phy_address = p->phy->addr;
+ cmd->transceiver = XCVR_EXTERNAL;
+ cmd->autoneg = p->link_config.autoneg;
+ cmd->maxtxpkt = 0;
+ cmd->maxrxpkt = 0;
+ return 0;
+}
+
+static int speed_duplex_to_caps(int speed, int duplex)
+{
+ int cap = 0;
+
+ switch (speed) {
+ case SPEED_10:
+ if (duplex == DUPLEX_FULL)
+ cap = SUPPORTED_10baseT_Full;
+ else
+ cap = SUPPORTED_10baseT_Half;
+ break;
+ case SPEED_100:
+ if (duplex == DUPLEX_FULL)
+ cap = SUPPORTED_100baseT_Full;
+ else
+ cap = SUPPORTED_100baseT_Half;
+ break;
+ case SPEED_1000:
+ if (duplex == DUPLEX_FULL)
+ cap = SUPPORTED_1000baseT_Full;
+ else
+ cap = SUPPORTED_1000baseT_Half;
+ break;
+ case SPEED_10000:
+ if (duplex == DUPLEX_FULL)
+ cap = SUPPORTED_10000baseT_Full;
+ }
+ return cap;
+}
+
+#define ADVERTISED_MASK (ADVERTISED_10baseT_Half | ADVERTISED_10baseT_Full | \
+ ADVERTISED_100baseT_Half | ADVERTISED_100baseT_Full | \
+ ADVERTISED_1000baseT_Half | ADVERTISED_1000baseT_Full | \
+ ADVERTISED_10000baseT_Full)
+
+static int set_settings(struct net_device *dev, struct ethtool_cmd *cmd)
+{
+ struct adapter *adapter = dev->priv;
+ struct port_info *p = &adapter->port[dev->if_port];
+ struct link_config *lc = &p->link_config;
+
+ if (!(lc->supported & SUPPORTED_Autoneg))
+ return -EOPNOTSUPP; /* can't change speed/duplex */
+
+ if (cmd->autoneg == AUTONEG_DISABLE) {
+ int cap = speed_duplex_to_caps(cmd->speed, cmd->duplex);
+
+ if (!(lc->supported & cap) || cmd->speed == SPEED_1000)
+ return -EINVAL;
+ lc->requested_speed = cmd->speed;
+ lc->requested_duplex = cmd->duplex;
+ lc->advertising = 0;
+ } else {
+ cmd->advertising &= ADVERTISED_MASK;
+ if (cmd->advertising & (cmd->advertising - 1))
+ cmd->advertising = lc->supported;
+ cmd->advertising &= lc->supported;
+ if (!cmd->advertising)
+ return -EINVAL;
+ lc->requested_speed = SPEED_INVALID;
+ lc->requested_duplex = DUPLEX_INVALID;
+ lc->advertising = cmd->advertising | ADVERTISED_Autoneg;
+ }
+ lc->autoneg = cmd->autoneg;
+ if (netif_running(dev))
+ t1_link_start(p->phy, p->mac, lc);
+ return 0;
+}
+
+static void get_pauseparam(struct net_device *dev,
+ struct ethtool_pauseparam *epause)
+{
+ struct adapter *adapter = dev->priv;
+ struct port_info *p = &adapter->port[dev->if_port];
+
+ epause->autoneg = (p->link_config.requested_fc & PAUSE_AUTONEG) != 0;
+ epause->rx_pause = (p->link_config.fc & PAUSE_RX) != 0;
+ epause->tx_pause = (p->link_config.fc & PAUSE_TX) != 0;
+}
+
+static int set_pauseparam(struct net_device *dev,
+ struct ethtool_pauseparam *epause)
+{
+ struct adapter *adapter = dev->priv;
+ struct port_info *p = &adapter->port[dev->if_port];
+ struct link_config *lc = &p->link_config;
+
+ if (epause->autoneg == AUTONEG_DISABLE)
+ lc->requested_fc = 0;
+ else if (lc->supported & SUPPORTED_Autoneg)
+ lc->requested_fc = PAUSE_AUTONEG;
+ else
+ return -EINVAL;
+
+ if (epause->rx_pause)
+ lc->requested_fc |= PAUSE_RX;
+ if (epause->tx_pause)
+ lc->requested_fc |= PAUSE_TX;
+ if (lc->autoneg == AUTONEG_ENABLE) {
+ if (netif_running(dev))
+ t1_link_start(p->phy, p->mac, lc);
+ } else {
+ lc->fc = lc->requested_fc & (PAUSE_RX | PAUSE_TX);
+ if (netif_running(dev))
+ p->mac->ops->set_speed_duplex_fc(p->mac, -1, -1,
+ lc->fc);
+ }
+ return 0;
+}
+
+static u32 get_rx_csum(struct net_device *dev)
+{
+ struct adapter *adapter = dev->priv;
+
+ return (adapter->flags & RX_CSUM_ENABLED) != 0;
+}
+
+static int set_rx_csum(struct net_device *dev, u32 data)
+{
+ struct adapter *adapter = dev->priv;
+
+ if (data)
+ adapter->flags |= RX_CSUM_ENABLED;
+ else
+ adapter->flags &= ~RX_CSUM_ENABLED;
+ return 0;
+}
+
+static int set_tso(struct net_device *dev, u32 value)
+{
+ struct adapter *adapter = dev->priv;
+
+ if (!(adapter->flags & TSO_CAPABLE))
+ return value ? -EOPNOTSUPP : 0;
+ return ethtool_op_set_tso(dev, value);
+}
+
+static void get_sge_param(struct net_device *dev, struct ethtool_ringparam *e)
+{
+ struct adapter *adapter = dev->priv;
+ int jumbo_fl = t1_is_T1B(adapter) ? 1 : 0;
+
+ e->rx_max_pending = MAX_RX_BUFFERS;
+ e->rx_mini_max_pending = 0;
+ e->rx_jumbo_max_pending = MAX_RX_JUMBO_BUFFERS;
+ e->tx_max_pending = MAX_CMDQ_ENTRIES;
+
+ e->rx_pending = adapter->params.sge.freelQ_size[!jumbo_fl];
+ e->rx_mini_pending = 0;
+ e->rx_jumbo_pending = adapter->params.sge.freelQ_size[jumbo_fl];
+ e->tx_pending = adapter->params.sge.cmdQ_size[0];
+}
+
+static int set_sge_param(struct net_device *dev, struct ethtool_ringparam *e)
+{
+ struct adapter *adapter = dev->priv;
+ int jumbo_fl = t1_is_T1B(adapter) ? 1 : 0;
+
+ if (e->rx_pending > MAX_RX_BUFFERS || e->rx_mini_pending ||
+ e->rx_jumbo_pending > MAX_RX_JUMBO_BUFFERS ||
+ e->tx_pending > MAX_CMDQ_ENTRIES ||
+ e->rx_pending < MIN_FL_ENTRIES ||
+ e->rx_jumbo_pending < MIN_FL_ENTRIES ||
+ e->tx_pending < (adapter->params.nports + 1) * (MAX_SKB_FRAGS + 1))
+ return -EINVAL;
+
+ if (adapter->flags & FULL_INIT_DONE)
+ return -EBUSY;
+
+ adapter->params.sge.freelQ_size[!jumbo_fl] = e->rx_pending;
+ adapter->params.sge.freelQ_size[jumbo_fl] = e->rx_jumbo_pending;
+ adapter->params.sge.cmdQ_size[0] = e->tx_pending;
+ adapter->params.sge.cmdQ_size[1] = e->tx_pending > MAX_CMDQ1_ENTRIES ?
+ MAX_CMDQ1_ENTRIES : e->tx_pending;
+ return 0;
+}
+
+static int set_coalesce(struct net_device *dev, struct ethtool_coalesce *c)
+{
+ struct adapter *adapter = dev->priv;
+
+ /*
+ * If RX coalescing is requested we use NAPI, otherwise interrupts.
+ * This choice can be made only when all ports and the TOE are off.
+ */
+ if (adapter->open_device_map == 0)
+ adapter->params.sge.polling = c->use_adaptive_rx_coalesce;
+
+ if (adapter->params.sge.polling) {
+ adapter->params.sge.rx_coalesce_usecs = 0;
+ } else {
+ adapter->params.sge.rx_coalesce_usecs = c->rx_coalesce_usecs;
+ }
+ adapter->params.sge.coalesce_enable = c->use_adaptive_rx_coalesce;
+ adapter->params.sge.sample_interval_usecs = c->rate_sample_interval;
+ t1_sge_set_coalesce_params(adapter->sge, &adapter->params.sge);
+ return 0;
+}
+
+static int get_coalesce(struct net_device *dev, struct ethtool_coalesce *c)
+{
+ struct adapter *adapter = dev->priv;
+
+ c->rx_coalesce_usecs = adapter->params.sge.rx_coalesce_usecs;
+ c->rate_sample_interval = adapter->params.sge.sample_interval_usecs;
+ c->use_adaptive_rx_coalesce = adapter->params.sge.coalesce_enable;
+ return 0;
+}
+
+static int get_eeprom_len(struct net_device *dev)
+{
+ return EEPROM_SIZE;
+}
+
+#define EEPROM_MAGIC(ap) \
+ (PCI_VENDOR_ID_CHELSIO | ((ap)->params.chip_version << 16))
+
+static int get_eeprom(struct net_device *dev, struct ethtool_eeprom *e,
+ u8 *data)
+{
+ int i;
+ u8 buf[EEPROM_SIZE] __attribute__((aligned(4)));
+ struct adapter *adapter = dev->priv;
+
+ e->magic = EEPROM_MAGIC(adapter);
+ for (i = e->offset & ~3; i < e->offset + e->len; i += sizeof(u32))
+ t1_seeprom_read(adapter, i, (u32 *)&buf[i]);
+ memcpy(data, buf + e->offset, e->len);
+ return 0;
+}
+
+static struct ethtool_ops t1_ethtool_ops = {
+ .get_settings = get_settings,
+ .set_settings = set_settings,
+ .get_drvinfo = get_drvinfo,
+ .get_msglevel = get_msglevel,
+ .set_msglevel = set_msglevel,
+ .get_ringparam = get_sge_param,
+ .set_ringparam = set_sge_param,
+ .get_coalesce = get_coalesce,
+ .set_coalesce = set_coalesce,
+ .get_eeprom_len = get_eeprom_len,
+ .get_eeprom = get_eeprom,
+ .get_pauseparam = get_pauseparam,
+ .set_pauseparam = set_pauseparam,
+ .get_rx_csum = get_rx_csum,
+ .set_rx_csum = set_rx_csum,
+ .get_tx_csum = ethtool_op_get_tx_csum,
+ .set_tx_csum = ethtool_op_set_tx_csum,
+ .get_sg = ethtool_op_get_sg,
+ .set_sg = ethtool_op_set_sg,
+ .get_link = ethtool_op_get_link,
+ .get_strings = get_strings,
+ .get_stats_count = get_stats_count,
+ .get_ethtool_stats = get_stats,
+ .get_regs_len = get_regs_len,
+ .get_regs = get_regs,
+ .get_tso = ethtool_op_get_tso,
+ .set_tso = set_tso,
+};
+
+static void cxgb_proc_cleanup(struct adapter *adapter,
+ struct proc_dir_entry *dir)
+{
+ const char *name;
+ name = adapter->name;
+ remove_proc_entry(name, dir);
+}
+//#define chtoe_setup_toedev(adapter) NULL
+#define update_mtu_tab(adapter)
+#define write_smt_entry(adapter, idx)
+
+static int t1_ioctl(struct net_device *dev, struct ifreq *req, int cmd)
+{
+ struct adapter *adapter = dev->priv;
+ struct mii_ioctl_data *data = (struct mii_ioctl_data *)&req->ifr_data;
+
+ switch (cmd) {
+ case SIOCGMIIPHY:
+ data->phy_id = adapter->port[dev->if_port].phy->addr;
+ /* FALLTHRU */
+ case SIOCGMIIREG: {
+ struct cphy *phy = adapter->port[dev->if_port].phy;
+ u32 val;
+
+ if (!phy->mdio_read)
+ return -EOPNOTSUPP;
+ phy->mdio_read(adapter, data->phy_id, 0, data->reg_num & 0x1f,
+ &val);
+ data->val_out = val;
+ break;
+ }
+ case SIOCSMIIREG: {
+ struct cphy *phy = adapter->port[dev->if_port].phy;
+
+ if (!capable(CAP_NET_ADMIN))
+ return -EPERM;
+ if (!phy->mdio_write)
+ return -EOPNOTSUPP;
+ phy->mdio_write(adapter, data->phy_id, 0, data->reg_num & 0x1f,
+ data->val_in);
+ break;
+ }
+
+ default:
+ return -EOPNOTSUPP;
+ }
+ return 0;
+}
+
+static int t1_change_mtu(struct net_device *dev, int new_mtu)
+{
+ int ret;
+ struct adapter *adapter = dev->priv;
+ struct cmac *mac = adapter->port[dev->if_port].mac;
+
+ if (!mac->ops->set_mtu)
+ return -EOPNOTSUPP;
+ if (new_mtu < 68)
+ return -EINVAL;
+ if ((ret = mac->ops->set_mtu(mac, new_mtu)))
+ return ret;
+ dev->mtu = new_mtu;
+ return 0;
+}
+
+static int t1_set_mac_addr(struct net_device *dev, void *p)
+{
+ struct adapter *adapter = dev->priv;
+ struct cmac *mac = adapter->port[dev->if_port].mac;
+ struct sockaddr *addr = p;
+
+ if (!mac->ops->macaddress_set)
+ return -EOPNOTSUPP;
+
+ memcpy(dev->dev_addr, addr->sa_data, dev->addr_len);
+ mac->ops->macaddress_set(mac, dev->dev_addr);
+ return 0;
+}
+
+#if defined(CONFIG_VLAN_8021Q) || defined(CONFIG_VLAN_8021Q_MODULE)
+static void vlan_rx_register(struct net_device *dev,
+ struct vlan_group *grp)
+{
+ struct adapter *adapter = dev->priv;
+
+ spin_lock_irq(&adapter->async_lock);
+ adapter->vlan_grp = grp;
+ t1_set_vlan_accel(adapter, grp != NULL);
+ spin_unlock_irq(&adapter->async_lock);
+}
+
+static void vlan_rx_kill_vid(struct net_device *dev, unsigned short vid)
+{
+ struct adapter *adapter = dev->priv;
+
+ spin_lock_irq(&adapter->async_lock);
+ if (adapter->vlan_grp)
+ adapter->vlan_grp->vlan_devices[vid] = NULL;
+ spin_unlock_irq(&adapter->async_lock);
+}
+#endif
+
+#ifdef CONFIG_NET_POLL_CONTROLLER
+static void t1_netpoll(struct net_device *dev)
+{
+ unsigned long flags;
+ struct adapter *adapter = dev->priv;
+
+ local_irq_save(flags);
+ t1_select_intr_handler(adapter)(adapter->pdev->irq, adapter, NULL);
+ local_irq_restore(flags);
+}
+#endif
+
+/*
+ * Periodic accumulation of MAC statistics. This is used only if the MAC
+ * does not have any other way to prevent stats counter overflow.
+ */
+static void mac_stats_task(void *data)
+{
+ int i;
+ struct adapter *adapter = data;
+
+ for_each_port(adapter, i) {
+ struct port_info *p = &adapter->port[i];
+
+ if (netif_running(p->dev))
+ p->mac->ops->statistics_update(p->mac,
+ MAC_STATS_UPDATE_FAST);
+ }
+
+ /* Schedule the next statistics update if any port is active. */
+ spin_lock(&adapter->work_lock);
+ if (adapter->open_device_map & PORT_MASK)
+ schedule_mac_stats_update(adapter,
+ adapter->params.stats_update_period);
+ spin_unlock(&adapter->work_lock);
+}
+
+/*
+ * Processes elmer0 external interrupts in process context.
+ */
+static void ext_intr_task(void *data)
+{
+ struct adapter *adapter = data;
+
+ elmer0_ext_intr_handler(adapter);
+
+ /* Now reenable external interrupts */
+ spin_lock_irq(&adapter->async_lock);
+ adapter->slow_intr_mask |= F_PL_INTR_EXT;
+ writel(F_PL_INTR_EXT, adapter->regs + A_PL_CAUSE);
+ writel(adapter->slow_intr_mask | F_PL_INTR_SGE_DATA,
+ adapter->regs + A_PL_ENABLE);
+ spin_unlock_irq(&adapter->async_lock);
+}
+
+/*
+ * Interrupt-context handler for elmer0 external interrupts.
+ */
+void t1_elmer0_ext_intr(struct adapter *adapter)
+{
+ /*
+ * Schedule a task to handle external interrupts as we require
+ * a process context. We disable EXT interrupts in the interim
+ * and let the task reenable them when it's done.
+ */
+ adapter->slow_intr_mask &= ~F_PL_INTR_EXT;
+ writel(adapter->slow_intr_mask | F_PL_INTR_SGE_DATA,
+ adapter->regs + A_PL_ENABLE);
+ schedule_work(&adapter->ext_intr_handler_task);
+}
+
+void t1_fatal_err(struct adapter *adapter)
+{
+ if (adapter->flags & FULL_INIT_DONE) {
+ t1_sge_stop(adapter->sge);
+ t1_interrupts_disable(adapter);
+ }
+ CH_ALERT("%s: encountered fatal error, operation suspended\n",
+ adapter->name);
+}
+
+static int __devinit init_one(struct pci_dev *pdev,
+ const struct pci_device_id *ent)
+{
+ static int version_printed;
+
+ int i, err, pci_using_dac = 0;
+ unsigned long mmio_start, mmio_len;
+ const struct board_info *bi;
+ struct adapter *adapter = NULL;
+ struct port_info *pi;
+
+ if (!version_printed) {
+ printk(KERN_INFO "%s - version %s\n", DRV_DESCRIPTION,
+ DRV_VERSION);
+ ++version_printed;
+ }
+
+ err = pci_enable_device(pdev);
+ if (err)
+ return err;
+
+ if (!(pci_resource_flags(pdev, 0) & IORESOURCE_MEM)) {
+ CH_ERR("%s: cannot find PCI device memory base address\n",
+ pci_name(pdev));
+ err = -ENODEV;
+ goto out_disable_pdev;
+ }
+
+ if (!pci_set_dma_mask(pdev, DMA_64BIT_MASK)) {
+ pci_using_dac = 1;
+
+ if (pci_set_consistent_dma_mask(pdev, DMA_64BIT_MASK)) {
+ CH_ERR("%s: unable to obtain 64-bit DMA for"
+ "consistent allocations\n", pci_name(pdev));
+ err = -ENODEV;
+ goto out_disable_pdev;
+ }
+
+ } else if ((err = pci_set_dma_mask(pdev, DMA_32BIT_MASK)) != 0) {
+ CH_ERR("%s: no usable DMA configuration\n", pci_name(pdev));
+ goto out_disable_pdev;
+ }
+
+ err = pci_request_regions(pdev, DRV_NAME);
+ if (err) {
+ CH_ERR("%s: cannot obtain PCI resources\n", pci_name(pdev));
+ goto out_disable_pdev;
+ }
+
+ pci_set_master(pdev);
+
+ mmio_start = pci_resource_start(pdev, 0);
+ mmio_len = pci_resource_len(pdev, 0);
+ bi = t1_get_board_info(ent->driver_data);
+
+ for (i = 0; i < bi->port_number; ++i) {
+ struct net_device *netdev;
+
+ netdev = alloc_etherdev(adapter ? 0 : sizeof(*adapter));
+ if (!netdev) {
+ err = -ENOMEM;
+ goto out_free_dev;
+ }
+
+ SET_MODULE_OWNER(netdev);
+ SET_NETDEV_DEV(netdev, &pdev->dev);
+
+ if (!adapter) {
+ adapter = netdev->priv;
+ adapter->pdev = pdev;
+ adapter->port[0].dev = netdev; /* so we don't leak it */
+
+ adapter->regs = ioremap(mmio_start, mmio_len);
+ if (!adapter->regs) {
+ CH_ERR("%s: cannot map device registers\n",
+ pci_name(pdev));
+ err = -ENOMEM;
+ goto out_free_dev;
+ }
+
+ if (t1_get_board_rev(adapter, bi, &adapter->params)) {
+ err = -ENODEV; /* Can't handle this chip rev */
+ goto out_free_dev;
+ }
+
+ adapter->name = pci_name(pdev);
+ adapter->msg_enable = dflt_msg_enable;
+ adapter->mmio_len = mmio_len;
+
+ init_MUTEX(&adapter->mib_mutex);
+ spin_lock_init(&adapter->tpi_lock);
+ spin_lock_init(&adapter->work_lock);
+ spin_lock_init(&adapter->async_lock);
+
+ INIT_WORK(&adapter->ext_intr_handler_task,
+ ext_intr_task, adapter);
+ INIT_WORK(&adapter->stats_update_task, mac_stats_task,
+ adapter);
+#ifdef work_struct
+ init_timer(&adapter->stats_update_timer);
+ adapter->stats_update_timer.function = mac_stats_timer;
+ adapter->stats_update_timer.data =
+ (unsigned long)adapter;
+#endif
+
+ pci_set_drvdata(pdev, netdev);
+ }
+
+ pi = &adapter->port[i];
+ pi->dev = netdev;
+ netif_carrier_off(netdev);
+ netdev->irq = pdev->irq;
+ netdev->if_port = i;
+ netdev->mem_start = mmio_start;
+ netdev->mem_end = mmio_start + mmio_len - 1;
+ netdev->priv = adapter;
+ netdev->features |= NETIF_F_SG | NETIF_F_IP_CSUM;
+ netdev->features |= NETIF_F_LLTX;
+
+ adapter->flags |= RX_CSUM_ENABLED | TCP_CSUM_CAPABLE;
+ if (pci_using_dac)
+ netdev->features |= NETIF_F_HIGHDMA;
+ if (vlan_tso_capable(adapter)) {
+#if defined(CONFIG_VLAN_8021Q) || defined(CONFIG_VLAN_8021Q_MODULE)
+ adapter->flags |= VLAN_ACCEL_CAPABLE;
+ netdev->features |=
+ NETIF_F_HW_VLAN_TX | NETIF_F_HW_VLAN_RX;
+ netdev->vlan_rx_register = vlan_rx_register;
+ netdev->vlan_rx_kill_vid = vlan_rx_kill_vid;
+#endif
+ adapter->flags |= TSO_CAPABLE;
+ netdev->features |= NETIF_F_TSO;
+ }
+
+ netdev->open = cxgb_open;
+ netdev->stop = cxgb_close;
+ netdev->hard_start_xmit = t1_start_xmit;
+ netdev->hard_header_len += (adapter->flags & TSO_CAPABLE) ?
+ sizeof(struct cpl_tx_pkt_lso) :
+ sizeof(struct cpl_tx_pkt);
+ netdev->get_stats = t1_get_stats;
+ netdev->set_multicast_list = t1_set_rxmode;
+ netdev->do_ioctl = t1_ioctl;
+ netdev->change_mtu = t1_change_mtu;
+ netdev->set_mac_address = t1_set_mac_addr;
+#ifdef CONFIG_NET_POLL_CONTROLLER
+ netdev->poll_controller = t1_netpoll;
+#endif
+ netdev->weight = 64;
+
+ SET_ETHTOOL_OPS(netdev, &t1_ethtool_ops);
+ }
+
+ if (t1_init_sw_modules(adapter, bi) < 0) {
+ err = -ENODEV;
+ goto out_free_dev;
+ }
+
+ /*
+ * The card is now ready to go. If any errors occur during device
+ * registration we do not fail the whole card but rather proceed only
+ * with the ports we manage to register successfully. However we must
+ * register at least one net device.
+ */
+ for (i = 0; i < bi->port_number; ++i) {
+ err = register_netdev(adapter->port[i].dev);
+ if (err)
+ CH_WARN("%s: cannot register net device %s, skipping\n",
+ pci_name(pdev), adapter->port[i].dev->name);
+ else {
+ /*
+ * Change the name we use for messages to the name of
+ * the first successfully registered interface.
+ */
+ if (!adapter->registered_device_map)
+ adapter->name = adapter->port[i].dev->name;
+
+ __set_bit(i, &adapter->registered_device_map);
+ }
+ }
+ if (!adapter->registered_device_map) {
+ CH_ERR("%s: could not register any net devices\n",
+ pci_name(pdev));
+ goto out_release_adapter_res;
+ }
+
+ printk(KERN_INFO "%s: %s (rev %d), %s %dMHz/%d-bit\n", adapter->name,
+ bi->desc, adapter->params.chip_revision,
+ adapter->params.pci.is_pcix ? "PCIX" : "PCI",
+ adapter->params.pci.speed, adapter->params.pci.width);
+ return 0;
+
+ out_release_adapter_res:
+ t1_free_sw_modules(adapter);
+ out_free_dev:
+ if (adapter) {
+ if (adapter->regs) iounmap(adapter->regs);
+ for (i = bi->port_number - 1; i >= 0; --i)
+ if (adapter->port[i].dev) {
+ cxgb_proc_cleanup(adapter, proc_root_driver);
+ kfree(adapter->port[i].dev);
+ }
+ }
+ pci_release_regions(pdev);
+ out_disable_pdev:
+ pci_disable_device(pdev);
+ pci_set_drvdata(pdev, NULL);
+ return err;
+}
+
+static inline void t1_sw_reset(struct pci_dev *pdev)
+{
+ pci_write_config_dword(pdev, A_PCICFG_PM_CSR, 3);
+ pci_write_config_dword(pdev, A_PCICFG_PM_CSR, 0);
+}
+
+static void __devexit remove_one(struct pci_dev *pdev)
+{
+ struct net_device *dev = pci_get_drvdata(pdev);
+
+ if (dev) {
+ int i;
+ struct adapter *adapter = dev->priv;
+
+ for_each_port(adapter, i)
+ if (test_bit(i, &adapter->registered_device_map))
+ unregister_netdev(adapter->port[i].dev);
+
+ t1_free_sw_modules(adapter);
+ iounmap(adapter->regs);
+ while (--i >= 0)
+ if (adapter->port[i].dev) {
+ cxgb_proc_cleanup(adapter, proc_root_driver);
+ kfree(adapter->port[i].dev);
+ }
+ pci_release_regions(pdev);
+ pci_disable_device(pdev);
+ pci_set_drvdata(pdev, NULL);
+ t1_sw_reset(pdev);
+ }
+}
+
+static struct pci_driver driver = {
+ .name = DRV_NAME,
+ .id_table = t1_pci_tbl,
+ .probe = init_one,
+ .remove = __devexit_p(remove_one),
+};
+
+static int __init t1_init_module(void)
+{
+ return pci_module_init(&driver);
+}
+
+static void __exit t1_cleanup_module(void)
+{
+ pci_unregister_driver(&driver);
+}
+
+module_init(t1_init_module);
+module_exit(t1_cleanup_module);
diff --git a/drivers/net/chelsio/elmer0.h b/drivers/net/chelsio/elmer0.h
new file mode 100644
index 00000000000..5590cb2dac1
--- /dev/null
+++ b/drivers/net/chelsio/elmer0.h
@@ -0,0 +1,151 @@
+/*****************************************************************************
+ * *
+ * File: elmer0.h *
+ * $Revision: 1.6 $ *
+ * $Date: 2005/06/21 22:49:43 $ *
+ * Description: *
+ * part of the Chelsio 10Gb Ethernet Driver. *
+ * *
+ * This program is free software; you can redistribute it and/or modify *
+ * it under the terms of the GNU General Public License, version 2, as *
+ * published by the Free Software Foundation. *
+ * *
+ * You should have received a copy of the GNU General Public License along *
+ * with this program; if not, write to the Free Software Foundation, Inc., *
+ * 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. *
+ * *
+ * THIS SOFTWARE IS PROVIDED ``AS IS'' AND WITHOUT ANY EXPRESS OR IMPLIED *
+ * WARRANTIES, INCLUDING, WITHOUT LIMITATION, THE IMPLIED WARRANTIES OF *
+ * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. *
+ * *
+ * http://www.chelsio.com *
+ * *
+ * Copyright (c) 2003 - 2005 Chelsio Communications, Inc. *
+ * All rights reserved. *
+ * *
+ * Maintainers: maintainers@chelsio.com *
+ * *
+ * Authors: Dimitrios Michailidis <dm@chelsio.com> *
+ * Tina Yang <tainay@chelsio.com> *
+ * Felix Marti <felix@chelsio.com> *
+ * Scott Bardone <sbardone@chelsio.com> *
+ * Kurt Ottaway <kottaway@chelsio.com> *
+ * Frank DiMambro <frank@chelsio.com> *
+ * *
+ * History: *
+ * *
+ ****************************************************************************/
+
+#ifndef _CXGB_ELMER0_H_
+#define _CXGB_ELMER0_H_
+
+/* ELMER0 registers */
+#define A_ELMER0_VERSION 0x100000
+#define A_ELMER0_PHY_CFG 0x100004
+#define A_ELMER0_INT_ENABLE 0x100008
+#define A_ELMER0_INT_CAUSE 0x10000c
+#define A_ELMER0_GPI_CFG 0x100010
+#define A_ELMER0_GPI_STAT 0x100014
+#define A_ELMER0_GPO 0x100018
+#define A_ELMER0_PORT0_MI1_CFG 0x400000
+
+#define S_MI1_MDI_ENABLE 0
+#define V_MI1_MDI_ENABLE(x) ((x) << S_MI1_MDI_ENABLE)
+#define F_MI1_MDI_ENABLE V_MI1_MDI_ENABLE(1U)
+
+#define S_MI1_MDI_INVERT 1
+#define V_MI1_MDI_INVERT(x) ((x) << S_MI1_MDI_INVERT)
+#define F_MI1_MDI_INVERT V_MI1_MDI_INVERT(1U)
+
+#define S_MI1_PREAMBLE_ENABLE 2
+#define V_MI1_PREAMBLE_ENABLE(x) ((x) << S_MI1_PREAMBLE_ENABLE)
+#define F_MI1_PREAMBLE_ENABLE V_MI1_PREAMBLE_ENABLE(1U)
+
+#define S_MI1_SOF 3
+#define M_MI1_SOF 0x3
+#define V_MI1_SOF(x) ((x) << S_MI1_SOF)
+#define G_MI1_SOF(x) (((x) >> S_MI1_SOF) & M_MI1_SOF)
+
+#define S_MI1_CLK_DIV 5
+#define M_MI1_CLK_DIV 0xff
+#define V_MI1_CLK_DIV(x) ((x) << S_MI1_CLK_DIV)
+#define G_MI1_CLK_DIV(x) (((x) >> S_MI1_CLK_DIV) & M_MI1_CLK_DIV)
+
+#define A_ELMER0_PORT0_MI1_ADDR 0x400004
+
+#define S_MI1_REG_ADDR 0
+#define M_MI1_REG_ADDR 0x1f
+#define V_MI1_REG_ADDR(x) ((x) << S_MI1_REG_ADDR)
+#define G_MI1_REG_ADDR(x) (((x) >> S_MI1_REG_ADDR) & M_MI1_REG_ADDR)
+
+#define S_MI1_PHY_ADDR 5
+#define M_MI1_PHY_ADDR 0x1f
+#define V_MI1_PHY_ADDR(x) ((x) << S_MI1_PHY_ADDR)
+#define G_MI1_PHY_ADDR(x) (((x) >> S_MI1_PHY_ADDR) & M_MI1_PHY_ADDR)
+
+#define A_ELMER0_PORT0_MI1_DATA 0x400008
+
+#define S_MI1_DATA 0
+#define M_MI1_DATA 0xffff
+#define V_MI1_DATA(x) ((x) << S_MI1_DATA)
+#define G_MI1_DATA(x) (((x) >> S_MI1_DATA) & M_MI1_DATA)
+
+#define A_ELMER0_PORT0_MI1_OP 0x40000c
+
+#define S_MI1_OP 0
+#define M_MI1_OP 0x3
+#define V_MI1_OP(x) ((x) << S_MI1_OP)
+#define G_MI1_OP(x) (((x) >> S_MI1_OP) & M_MI1_OP)
+
+#define S_MI1_ADDR_AUTOINC 2
+#define V_MI1_ADDR_AUTOINC(x) ((x) << S_MI1_ADDR_AUTOINC)
+#define F_MI1_ADDR_AUTOINC V_MI1_ADDR_AUTOINC(1U)
+
+#define S_MI1_OP_BUSY 31
+#define V_MI1_OP_BUSY(x) ((x) << S_MI1_OP_BUSY)
+#define F_MI1_OP_BUSY V_MI1_OP_BUSY(1U)
+
+#define A_ELMER0_PORT1_MI1_CFG 0x500000
+#define A_ELMER0_PORT1_MI1_ADDR 0x500004
+#define A_ELMER0_PORT1_MI1_DATA 0x500008
+#define A_ELMER0_PORT1_MI1_OP 0x50000c
+#define A_ELMER0_PORT2_MI1_CFG 0x600000
+#define A_ELMER0_PORT2_MI1_ADDR 0x600004
+#define A_ELMER0_PORT2_MI1_DATA 0x600008
+#define A_ELMER0_PORT2_MI1_OP 0x60000c
+#define A_ELMER0_PORT3_MI1_CFG 0x700000
+#define A_ELMER0_PORT3_MI1_ADDR 0x700004
+#define A_ELMER0_PORT3_MI1_DATA 0x700008
+#define A_ELMER0_PORT3_MI1_OP 0x70000c
+
+/* Simple bit definition for GPI and GP0 registers. */
+#define ELMER0_GP_BIT0 0x0001
+#define ELMER0_GP_BIT1 0x0002
+#define ELMER0_GP_BIT2 0x0004
+#define ELMER0_GP_BIT3 0x0008
+#define ELMER0_GP_BIT4 0x0010
+#define ELMER0_GP_BIT5 0x0020
+#define ELMER0_GP_BIT6 0x0040
+#define ELMER0_GP_BIT7 0x0080
+#define ELMER0_GP_BIT8 0x0100
+#define ELMER0_GP_BIT9 0x0200
+#define ELMER0_GP_BIT10 0x0400
+#define ELMER0_GP_BIT11 0x0800
+#define ELMER0_GP_BIT12 0x1000
+#define ELMER0_GP_BIT13 0x2000
+#define ELMER0_GP_BIT14 0x4000
+#define ELMER0_GP_BIT15 0x8000
+#define ELMER0_GP_BIT16 0x10000
+#define ELMER0_GP_BIT17 0x20000
+#define ELMER0_GP_BIT18 0x40000
+#define ELMER0_GP_BIT19 0x80000
+
+#define MI1_OP_DIRECT_WRITE 1
+#define MI1_OP_DIRECT_READ 2
+
+#define MI1_OP_INDIRECT_ADDRESS 0
+#define MI1_OP_INDIRECT_WRITE 1
+#define MI1_OP_INDIRECT_READ_INC 2
+#define MI1_OP_INDIRECT_READ 3
+
+#endif /* _CXGB_ELMER0_H_ */
diff --git a/drivers/net/chelsio/espi.c b/drivers/net/chelsio/espi.c
new file mode 100644
index 00000000000..230642571c9
--- /dev/null
+++ b/drivers/net/chelsio/espi.c
@@ -0,0 +1,346 @@
+/*****************************************************************************
+ * *
+ * File: espi.c *
+ * $Revision: 1.14 $ *
+ * $Date: 2005/05/14 00:59:32 $ *
+ * Description: *
+ * Ethernet SPI functionality. *
+ * part of the Chelsio 10Gb Ethernet Driver. *
+ * *
+ * This program is free software; you can redistribute it and/or modify *
+ * it under the terms of the GNU General Public License, version 2, as *
+ * published by the Free Software Foundation. *
+ * *
+ * You should have received a copy of the GNU General Public License along *
+ * with this program; if not, write to the Free Software Foundation, Inc., *
+ * 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. *
+ * *
+ * THIS SOFTWARE IS PROVIDED ``AS IS'' AND WITHOUT ANY EXPRESS OR IMPLIED *
+ * WARRANTIES, INCLUDING, WITHOUT LIMITATION, THE IMPLIED WARRANTIES OF *
+ * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. *
+ * *
+ * http://www.chelsio.com *
+ * *
+ * Copyright (c) 2003 - 2005 Chelsio Communications, Inc. *
+ * All rights reserved. *
+ * *
+ * Maintainers: maintainers@chelsio.com *
+ * *
+ * Authors: Dimitrios Michailidis <dm@chelsio.com> *
+ * Tina Yang <tainay@chelsio.com> *
+ * Felix Marti <felix@chelsio.com> *
+ * Scott Bardone <sbardone@chelsio.com> *
+ * Kurt Ottaway <kottaway@chelsio.com> *
+ * Frank DiMambro <frank@chelsio.com> *
+ * *
+ * History: *
+ * *
+ ****************************************************************************/
+
+#include "common.h"
+#include "regs.h"
+#include "espi.h"
+
+struct peespi {
+ adapter_t *adapter;
+ struct espi_intr_counts intr_cnt;
+ u32 misc_ctrl;
+ spinlock_t lock;
+};
+
+#define ESPI_INTR_MASK (F_DIP4ERR | F_RXDROP | F_TXDROP | F_RXOVERFLOW | \
+ F_RAMPARITYERR | F_DIP2PARITYERR)
+#define MON_MASK (V_MONITORED_PORT_NUM(3) | F_MONITORED_DIRECTION \
+ | F_MONITORED_INTERFACE)
+
+#define TRICN_CNFG 14
+#define TRICN_CMD_READ 0x11
+#define TRICN_CMD_WRITE 0x21
+#define TRICN_CMD_ATTEMPTS 10
+
+static int tricn_write(adapter_t *adapter, int bundle_addr, int module_addr,
+ int ch_addr, int reg_offset, u32 wr_data)
+{
+ int busy, attempts = TRICN_CMD_ATTEMPTS;
+
+ writel(V_WRITE_DATA(wr_data) |
+ V_REGISTER_OFFSET(reg_offset) |
+ V_CHANNEL_ADDR(ch_addr) | V_MODULE_ADDR(module_addr) |
+ V_BUNDLE_ADDR(bundle_addr) |
+ V_SPI4_COMMAND(TRICN_CMD_WRITE),
+ adapter->regs + A_ESPI_CMD_ADDR);
+ writel(0, adapter->regs + A_ESPI_GOSTAT);
+
+ do {
+ busy = readl(adapter->regs + A_ESPI_GOSTAT) & F_ESPI_CMD_BUSY;
+ } while (busy && --attempts);
+
+ if (busy)
+ CH_ERR("%s: TRICN write timed out\n", adapter->name);
+
+ return busy;
+}
+
+/* 1. Deassert rx_reset_core. */
+/* 2. Program TRICN_CNFG registers. */
+/* 3. Deassert rx_reset_link */
+static int tricn_init(adapter_t *adapter)
+{
+ int i = 0;
+ int sme = 1;
+ int stat = 0;
+ int timeout = 0;
+ int is_ready = 0;
+ int dynamic_deskew = 0;
+
+ if (dynamic_deskew)
+ sme = 0;
+
+
+ /* 1 */
+ timeout=1000;
+ do {
+ stat = readl(adapter->regs + A_ESPI_RX_RESET);
+ is_ready = (stat & 0x4);
+ timeout--;
+ udelay(5);
+ } while (!is_ready || (timeout==0));
+ writel(0x2, adapter->regs + A_ESPI_RX_RESET);
+ if (timeout==0)
+ {
+ CH_ERR("ESPI : ERROR : Timeout tricn_init() \n");
+ t1_fatal_err(adapter);
+ }
+
+ /* 2 */
+ if (sme) {
+ tricn_write(adapter, 0, 0, 0, TRICN_CNFG, 0x81);
+ tricn_write(adapter, 0, 1, 0, TRICN_CNFG, 0x81);
+ tricn_write(adapter, 0, 2, 0, TRICN_CNFG, 0x81);
+ }
+ for (i=1; i<= 8; i++) tricn_write(adapter, 0, 0, i, TRICN_CNFG, 0xf1);
+ for (i=1; i<= 2; i++) tricn_write(adapter, 0, 1, i, TRICN_CNFG, 0xf1);
+ for (i=1; i<= 3; i++) tricn_write(adapter, 0, 2, i, TRICN_CNFG, 0xe1);
+ for (i=4; i<= 4; i++) tricn_write(adapter, 0, 2, i, TRICN_CNFG, 0xf1);
+ for (i=5; i<= 5; i++) tricn_write(adapter, 0, 2, i, TRICN_CNFG, 0xe1);
+ for (i=6; i<= 6; i++) tricn_write(adapter, 0, 2, i, TRICN_CNFG, 0xf1);
+ for (i=7; i<= 7; i++) tricn_write(adapter, 0, 2, i, TRICN_CNFG, 0x80);
+ for (i=8; i<= 8; i++) tricn_write(adapter, 0, 2, i, TRICN_CNFG, 0xf1);
+
+ /* 3 */
+ writel(0x3, adapter->regs + A_ESPI_RX_RESET);
+
+ return 0;
+}
+
+void t1_espi_intr_enable(struct peespi *espi)
+{
+ u32 enable, pl_intr = readl(espi->adapter->regs + A_PL_ENABLE);
+
+ /*
+ * Cannot enable ESPI interrupts on T1B because HW asserts the
+ * interrupt incorrectly, namely the driver gets ESPI interrupts
+ * but no data is actually dropped (can verify this reading the ESPI
+ * drop registers). Also, once the ESPI interrupt is asserted it
+ * cannot be cleared (HW bug).
+ */
+ enable = t1_is_T1B(espi->adapter) ? 0 : ESPI_INTR_MASK;
+ writel(enable, espi->adapter->regs + A_ESPI_INTR_ENABLE);
+ writel(pl_intr | F_PL_INTR_ESPI, espi->adapter->regs + A_PL_ENABLE);
+}
+
+void t1_espi_intr_clear(struct peespi *espi)
+{
+ writel(0xffffffff, espi->adapter->regs + A_ESPI_INTR_STATUS);
+ writel(F_PL_INTR_ESPI, espi->adapter->regs + A_PL_CAUSE);
+}
+
+void t1_espi_intr_disable(struct peespi *espi)
+{
+ u32 pl_intr = readl(espi->adapter->regs + A_PL_ENABLE);
+
+ writel(0, espi->adapter->regs + A_ESPI_INTR_ENABLE);
+ writel(pl_intr & ~F_PL_INTR_ESPI, espi->adapter->regs + A_PL_ENABLE);
+}
+
+int t1_espi_intr_handler(struct peespi *espi)
+{
+ u32 cnt;
+ u32 status = readl(espi->adapter->regs + A_ESPI_INTR_STATUS);
+
+ if (status & F_DIP4ERR)
+ espi->intr_cnt.DIP4_err++;
+ if (status & F_RXDROP)
+ espi->intr_cnt.rx_drops++;
+ if (status & F_TXDROP)
+ espi->intr_cnt.tx_drops++;
+ if (status & F_RXOVERFLOW)
+ espi->intr_cnt.rx_ovflw++;
+ if (status & F_RAMPARITYERR)
+ espi->intr_cnt.parity_err++;
+ if (status & F_DIP2PARITYERR) {
+ espi->intr_cnt.DIP2_parity_err++;
+
+ /*
+ * Must read the error count to clear the interrupt
+ * that it causes.
+ */
+ cnt = readl(espi->adapter->regs + A_ESPI_DIP2_ERR_COUNT);
+ }
+
+ /*
+ * For T1B we need to write 1 to clear ESPI interrupts. For T2+ we
+ * write the status as is.
+ */
+ if (status && t1_is_T1B(espi->adapter))
+ status = 1;
+ writel(status, espi->adapter->regs + A_ESPI_INTR_STATUS);
+ return 0;
+}
+
+const struct espi_intr_counts *t1_espi_get_intr_counts(struct peespi *espi)
+{
+ return &espi->intr_cnt;
+}
+
+static void espi_setup_for_pm3393(adapter_t *adapter)
+{
+ u32 wmark = t1_is_T1B(adapter) ? 0x4000 : 0x3200;
+
+ writel(0x1f4, adapter->regs + A_ESPI_SCH_TOKEN0);
+ writel(0x1f4, adapter->regs + A_ESPI_SCH_TOKEN1);
+ writel(0x1f4, adapter->regs + A_ESPI_SCH_TOKEN2);
+ writel(0x1f4, adapter->regs + A_ESPI_SCH_TOKEN3);
+ writel(0x100, adapter->regs + A_ESPI_RX_FIFO_ALMOST_EMPTY_WATERMARK);
+ writel(wmark, adapter->regs + A_ESPI_RX_FIFO_ALMOST_FULL_WATERMARK);
+ writel(3, adapter->regs + A_ESPI_CALENDAR_LENGTH);
+ writel(0x08000008, adapter->regs + A_ESPI_TRAIN);
+ writel(V_RX_NPORTS(1) | V_TX_NPORTS(1), adapter->regs + A_PORT_CONFIG);
+}
+
+/* T2 Init part -- */
+/* 1. Set T_ESPI_MISCCTRL_ADDR */
+/* 2. Init ESPI registers. */
+/* 3. Init TriCN Hard Macro */
+int t1_espi_init(struct peespi *espi, int mac_type, int nports)
+{
+ u32 cnt;
+
+ u32 status_enable_extra = 0;
+ adapter_t *adapter = espi->adapter;
+ u32 status, burstval = 0x800100;
+
+ /* Disable ESPI training. MACs that can handle it enable it below. */
+ writel(0, adapter->regs + A_ESPI_TRAIN);
+
+ if (is_T2(adapter)) {
+ writel(V_OUT_OF_SYNC_COUNT(4) |
+ V_DIP2_PARITY_ERR_THRES(3) |
+ V_DIP4_THRES(1), adapter->regs + A_ESPI_MISC_CONTROL);
+ if (nports == 4) {
+ /* T204: maxburst1 = 0x40, maxburst2 = 0x20 */
+ burstval = 0x200040;
+ }
+ }
+ writel(burstval, adapter->regs + A_ESPI_MAXBURST1_MAXBURST2);
+
+ switch (mac_type) {
+ case CHBT_MAC_PM3393:
+ espi_setup_for_pm3393(adapter);
+ break;
+ default:
+ return -1;
+ }
+
+ /*
+ * Make sure any pending interrupts from the SPI are
+ * Cleared before enabling the interrupt.
+ */
+ writel(ESPI_INTR_MASK, espi->adapter->regs + A_ESPI_INTR_ENABLE);
+ status = readl(espi->adapter->regs + A_ESPI_INTR_STATUS);
+ if (status & F_DIP2PARITYERR) {
+ cnt = readl(espi->adapter->regs + A_ESPI_DIP2_ERR_COUNT);
+ }
+
+ /*
+ * For T1B we need to write 1 to clear ESPI interrupts. For T2+ we
+ * write the status as is.
+ */
+ if (status && t1_is_T1B(espi->adapter))
+ status = 1;
+ writel(status, espi->adapter->regs + A_ESPI_INTR_STATUS);
+
+ writel(status_enable_extra | F_RXSTATUSENABLE,
+ adapter->regs + A_ESPI_FIFO_STATUS_ENABLE);
+
+ if (is_T2(adapter)) {
+ tricn_init(adapter);
+ /*
+ * Always position the control at the 1st port egress IN
+ * (sop,eop) counter to reduce PIOs for T/N210 workaround.
+ */
+ espi->misc_ctrl = (readl(adapter->regs + A_ESPI_MISC_CONTROL)
+ & ~MON_MASK) | (F_MONITORED_DIRECTION
+ | F_MONITORED_INTERFACE);
+ writel(espi->misc_ctrl, adapter->regs + A_ESPI_MISC_CONTROL);
+ spin_lock_init(&espi->lock);
+ }
+
+ return 0;
+}
+
+void t1_espi_destroy(struct peespi *espi)
+{
+ kfree(espi);
+}
+
+struct peespi *t1_espi_create(adapter_t *adapter)
+{
+ struct peespi *espi = kmalloc(sizeof(*espi), GFP_KERNEL);
+
+ memset(espi, 0, sizeof(*espi));
+
+ if (espi)
+ espi->adapter = adapter;
+ return espi;
+}
+
+void t1_espi_set_misc_ctrl(adapter_t *adapter, u32 val)
+{
+ struct peespi *espi = adapter->espi;
+
+ if (!is_T2(adapter))
+ return;
+ spin_lock(&espi->lock);
+ espi->misc_ctrl = (val & ~MON_MASK) |
+ (espi->misc_ctrl & MON_MASK);
+ writel(espi->misc_ctrl, adapter->regs + A_ESPI_MISC_CONTROL);
+ spin_unlock(&espi->lock);
+}
+
+u32 t1_espi_get_mon(adapter_t *adapter, u32 addr, u8 wait)
+{
+ u32 sel;
+
+ struct peespi *espi = adapter->espi;
+
+ if (!is_T2(adapter))
+ return 0;
+ sel = V_MONITORED_PORT_NUM((addr & 0x3c) >> 2);
+ if (!wait) {
+ if (!spin_trylock(&espi->lock))
+ return 0;
+ }
+ else
+ spin_lock(&espi->lock);
+ if ((sel != (espi->misc_ctrl & MON_MASK))) {
+ writel(((espi->misc_ctrl & ~MON_MASK) | sel),
+ adapter->regs + A_ESPI_MISC_CONTROL);
+ sel = readl(adapter->regs + A_ESPI_SCH_TOKEN3);
+ writel(espi->misc_ctrl, adapter->regs + A_ESPI_MISC_CONTROL);
+ }
+ else
+ sel = readl(adapter->regs + A_ESPI_SCH_TOKEN3);
+ spin_unlock(&espi->lock);
+ return sel;
+}
diff --git a/drivers/net/chelsio/espi.h b/drivers/net/chelsio/espi.h
new file mode 100644
index 00000000000..c90e37f8457
--- /dev/null
+++ b/drivers/net/chelsio/espi.h
@@ -0,0 +1,68 @@
+/*****************************************************************************
+ * *
+ * File: espi.h *
+ * $Revision: 1.7 $ *
+ * $Date: 2005/06/21 18:29:47 $ *
+ * Description: *
+ * part of the Chelsio 10Gb Ethernet Driver. *
+ * *
+ * This program is free software; you can redistribute it and/or modify *
+ * it under the terms of the GNU General Public License, version 2, as *
+ * published by the Free Software Foundation. *
+ * *
+ * You should have received a copy of the GNU General Public License along *
+ * with this program; if not, write to the Free Software Foundation, Inc., *
+ * 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. *
+ * *
+ * THIS SOFTWARE IS PROVIDED ``AS IS'' AND WITHOUT ANY EXPRESS OR IMPLIED *
+ * WARRANTIES, INCLUDING, WITHOUT LIMITATION, THE IMPLIED WARRANTIES OF *
+ * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. *
+ * *
+ * http://www.chelsio.com *
+ * *
+ * Copyright (c) 2003 - 2005 Chelsio Communications, Inc. *
+ * All rights reserved. *
+ * *
+ * Maintainers: maintainers@chelsio.com *
+ * *
+ * Authors: Dimitrios Michailidis <dm@chelsio.com> *
+ * Tina Yang <tainay@chelsio.com> *
+ * Felix Marti <felix@chelsio.com> *
+ * Scott Bardone <sbardone@chelsio.com> *
+ * Kurt Ottaway <kottaway@chelsio.com> *
+ * Frank DiMambro <frank@chelsio.com> *
+ * *
+ * History: *
+ * *
+ ****************************************************************************/
+
+#ifndef _CXGB_ESPI_H_
+#define _CXGB_ESPI_H_
+
+#include "common.h"
+
+struct espi_intr_counts {
+ unsigned int DIP4_err;
+ unsigned int rx_drops;
+ unsigned int tx_drops;
+ unsigned int rx_ovflw;
+ unsigned int parity_err;
+ unsigned int DIP2_parity_err;
+};
+
+struct peespi;
+
+struct peespi *t1_espi_create(adapter_t *adapter);
+void t1_espi_destroy(struct peespi *espi);
+int t1_espi_init(struct peespi *espi, int mac_type, int nports);
+
+void t1_espi_intr_enable(struct peespi *);
+void t1_espi_intr_clear(struct peespi *);
+void t1_espi_intr_disable(struct peespi *);
+int t1_espi_intr_handler(struct peespi *);
+const struct espi_intr_counts *t1_espi_get_intr_counts(struct peespi *espi);
+
+void t1_espi_set_misc_ctrl(adapter_t *adapter, u32 val);
+u32 t1_espi_get_mon(adapter_t *adapter, u32 addr, u8 wait);
+
+#endif /* _CXGB_ESPI_H_ */
diff --git a/drivers/net/chelsio/gmac.h b/drivers/net/chelsio/gmac.h
new file mode 100644
index 00000000000..746b0eeea96
--- /dev/null
+++ b/drivers/net/chelsio/gmac.h
@@ -0,0 +1,134 @@
+/*****************************************************************************
+ * *
+ * File: gmac.h *
+ * $Revision: 1.6 $ *
+ * $Date: 2005/06/21 18:29:47 $ *
+ * Description: *
+ * Generic MAC functionality. *
+ * part of the Chelsio 10Gb Ethernet Driver. *
+ * *
+ * This program is free software; you can redistribute it and/or modify *
+ * it under the terms of the GNU General Public License, version 2, as *
+ * published by the Free Software Foundation. *
+ * *
+ * You should have received a copy of the GNU General Public License along *
+ * with this program; if not, write to the Free Software Foundation, Inc., *
+ * 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. *
+ * *
+ * THIS SOFTWARE IS PROVIDED ``AS IS'' AND WITHOUT ANY EXPRESS OR IMPLIED *
+ * WARRANTIES, INCLUDING, WITHOUT LIMITATION, THE IMPLIED WARRANTIES OF *
+ * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. *
+ * *
+ * http://www.chelsio.com *
+ * *
+ * Copyright (c) 2003 - 2005 Chelsio Communications, Inc. *
+ * All rights reserved. *
+ * *
+ * Maintainers: maintainers@chelsio.com *
+ * *
+ * Authors: Dimitrios Michailidis <dm@chelsio.com> *
+ * Tina Yang <tainay@chelsio.com> *
+ * Felix Marti <felix@chelsio.com> *
+ * Scott Bardone <sbardone@chelsio.com> *
+ * Kurt Ottaway <kottaway@chelsio.com> *
+ * Frank DiMambro <frank@chelsio.com> *
+ * *
+ * History: *
+ * *
+ ****************************************************************************/
+
+#ifndef _CXGB_GMAC_H_
+#define _CXGB_GMAC_H_
+
+#include "common.h"
+
+enum { MAC_STATS_UPDATE_FAST, MAC_STATS_UPDATE_FULL };
+enum { MAC_DIRECTION_RX = 1, MAC_DIRECTION_TX = 2 };
+
+struct cmac_statistics {
+ /* Transmit */
+ u64 TxOctetsOK;
+ u64 TxOctetsBad;
+ u64 TxUnicastFramesOK;
+ u64 TxMulticastFramesOK;
+ u64 TxBroadcastFramesOK;
+ u64 TxPauseFrames;
+ u64 TxFramesWithDeferredXmissions;
+ u64 TxLateCollisions;
+ u64 TxTotalCollisions;
+ u64 TxFramesAbortedDueToXSCollisions;
+ u64 TxUnderrun;
+ u64 TxLengthErrors;
+ u64 TxInternalMACXmitError;
+ u64 TxFramesWithExcessiveDeferral;
+ u64 TxFCSErrors;
+
+ /* Receive */
+ u64 RxOctetsOK;
+ u64 RxOctetsBad;
+ u64 RxUnicastFramesOK;
+ u64 RxMulticastFramesOK;
+ u64 RxBroadcastFramesOK;
+ u64 RxPauseFrames;
+ u64 RxFCSErrors;
+ u64 RxAlignErrors;
+ u64 RxSymbolErrors;
+ u64 RxDataErrors;
+ u64 RxSequenceErrors;
+ u64 RxRuntErrors;
+ u64 RxJabberErrors;
+ u64 RxInternalMACRcvError;
+ u64 RxInRangeLengthErrors;
+ u64 RxOutOfRangeLengthField;
+ u64 RxFrameTooLongErrors;
+};
+
+struct cmac_ops {
+ void (*destroy)(struct cmac *);
+ int (*reset)(struct cmac *);
+ int (*interrupt_enable)(struct cmac *);
+ int (*interrupt_disable)(struct cmac *);
+ int (*interrupt_clear)(struct cmac *);
+ int (*interrupt_handler)(struct cmac *);
+
+ int (*enable)(struct cmac *, int);
+ int (*disable)(struct cmac *, int);
+
+ int (*loopback_enable)(struct cmac *);
+ int (*loopback_disable)(struct cmac *);
+
+ int (*set_mtu)(struct cmac *, int mtu);
+ int (*set_rx_mode)(struct cmac *, struct t1_rx_mode *rm);
+
+ int (*set_speed_duplex_fc)(struct cmac *, int speed, int duplex, int fc);
+ int (*get_speed_duplex_fc)(struct cmac *, int *speed, int *duplex,
+ int *fc);
+
+ const struct cmac_statistics *(*statistics_update)(struct cmac *, int);
+
+ int (*macaddress_get)(struct cmac *, u8 mac_addr[6]);
+ int (*macaddress_set)(struct cmac *, u8 mac_addr[6]);
+};
+
+typedef struct _cmac_instance cmac_instance;
+
+struct cmac {
+ struct cmac_statistics stats;
+ adapter_t *adapter;
+ struct cmac_ops *ops;
+ cmac_instance *instance;
+};
+
+struct gmac {
+ unsigned int stats_update_period;
+ struct cmac *(*create)(adapter_t *adapter, int index);
+ int (*reset)(adapter_t *);
+};
+
+extern struct gmac t1_pm3393_ops;
+extern struct gmac t1_chelsio_mac_ops;
+extern struct gmac t1_vsc7321_ops;
+extern struct gmac t1_ixf1010_ops;
+extern struct gmac t1_dummy_mac_ops;
+
+#endif /* _CXGB_GMAC_H_ */
diff --git a/drivers/net/chelsio/mv88x201x.c b/drivers/net/chelsio/mv88x201x.c
new file mode 100644
index 00000000000..db503428278
--- /dev/null
+++ b/drivers/net/chelsio/mv88x201x.c
@@ -0,0 +1,252 @@
+/*****************************************************************************
+ * *
+ * File: mv88x201x.c *
+ * $Revision: 1.12 $ *
+ * $Date: 2005/04/15 19:27:14 $ *
+ * Description: *
+ * Marvell PHY (mv88x201x) functionality. *
+ * part of the Chelsio 10Gb Ethernet Driver. *
+ * *
+ * This program is free software; you can redistribute it and/or modify *
+ * it under the terms of the GNU General Public License, version 2, as *
+ * published by the Free Software Foundation. *
+ * *
+ * You should have received a copy of the GNU General Public License along *
+ * with this program; if not, write to the Free Software Foundation, Inc., *
+ * 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. *
+ * *
+ * THIS SOFTWARE IS PROVIDED ``AS IS'' AND WITHOUT ANY EXPRESS OR IMPLIED *
+ * WARRANTIES, INCLUDING, WITHOUT LIMITATION, THE IMPLIED WARRANTIES OF *
+ * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. *
+ * *
+ * http://www.chelsio.com *
+ * *
+ * Copyright (c) 2003 - 2005 Chelsio Communications, Inc. *
+ * All rights reserved. *
+ * *
+ * Maintainers: maintainers@chelsio.com *
+ * *
+ * Authors: Dimitrios Michailidis <dm@chelsio.com> *
+ * Tina Yang <tainay@chelsio.com> *
+ * Felix Marti <felix@chelsio.com> *
+ * Scott Bardone <sbardone@chelsio.com> *
+ * Kurt Ottaway <kottaway@chelsio.com> *
+ * Frank DiMambro <frank@chelsio.com> *
+ * *
+ * History: *
+ * *
+ ****************************************************************************/
+
+#include "cphy.h"
+#include "elmer0.h"
+
+/*
+ * The 88x2010 Rev C. requires some link status registers * to be read
+ * twice in order to get the right values. Future * revisions will fix
+ * this problem and then this macro * can disappear.
+ */
+#define MV88x2010_LINK_STATUS_BUGS 1
+
+static int led_init(struct cphy *cphy)
+{
+ /* Setup the LED registers so we can turn on/off.
+ * Writing these bits maps control to another
+ * register. mmd(0x1) addr(0x7)
+ */
+ mdio_write(cphy, 0x3, 0x8304, 0xdddd);
+ return 0;
+}
+
+static int led_link(struct cphy *cphy, u32 do_enable)
+{
+ u32 led = 0;
+#define LINK_ENABLE_BIT 0x1
+
+ mdio_read(cphy, 0x1, 0x7, &led);
+
+ if (do_enable & LINK_ENABLE_BIT) {
+ led |= LINK_ENABLE_BIT;
+ mdio_write(cphy, 0x1, 0x7, led);
+ } else {
+ led &= ~LINK_ENABLE_BIT;
+ mdio_write(cphy, 0x1, 0x7, led);
+ }
+ return 0;
+}
+
+/* Port Reset */
+static int mv88x201x_reset(struct cphy *cphy, int wait)
+{
+ /* This can be done through registers. It is not required since
+ * a full chip reset is used.
+ */
+ return 0;
+}
+
+static int mv88x201x_interrupt_enable(struct cphy *cphy)
+{
+ u32 elmer;
+
+ /* Enable PHY LASI interrupts. */
+ mdio_write(cphy, 0x1, 0x9002, 0x1);
+
+ /* Enable Marvell interrupts through Elmer0. */
+ t1_tpi_read(cphy->adapter, A_ELMER0_INT_ENABLE, &elmer);
+ elmer |= ELMER0_GP_BIT6;
+ t1_tpi_write(cphy->adapter, A_ELMER0_INT_ENABLE, elmer);
+ return 0;
+}
+
+static int mv88x201x_interrupt_disable(struct cphy *cphy)
+{
+ u32 elmer;
+
+ /* Disable PHY LASI interrupts. */
+ mdio_write(cphy, 0x1, 0x9002, 0x0);
+
+ /* Disable Marvell interrupts through Elmer0. */
+ t1_tpi_read(cphy->adapter, A_ELMER0_INT_ENABLE, &elmer);
+ elmer &= ~ELMER0_GP_BIT6;
+ t1_tpi_write(cphy->adapter, A_ELMER0_INT_ENABLE, elmer);
+ return 0;
+}
+
+static int mv88x201x_interrupt_clear(struct cphy *cphy)
+{
+ u32 elmer;
+ u32 val;
+
+#ifdef MV88x2010_LINK_STATUS_BUGS
+ /* Required to read twice before clear takes affect. */
+ mdio_read(cphy, 0x1, 0x9003, &val);
+ mdio_read(cphy, 0x1, 0x9004, &val);
+ mdio_read(cphy, 0x1, 0x9005, &val);
+
+ /* Read this register after the others above it else
+ * the register doesn't clear correctly.
+ */
+ mdio_read(cphy, 0x1, 0x1, &val);
+#endif
+
+ /* Clear link status. */
+ mdio_read(cphy, 0x1, 0x1, &val);
+ /* Clear PHY LASI interrupts. */
+ mdio_read(cphy, 0x1, 0x9005, &val);
+
+#ifdef MV88x2010_LINK_STATUS_BUGS
+ /* Do it again. */
+ mdio_read(cphy, 0x1, 0x9003, &val);
+ mdio_read(cphy, 0x1, 0x9004, &val);
+#endif
+
+ /* Clear Marvell interrupts through Elmer0. */
+ t1_tpi_read(cphy->adapter, A_ELMER0_INT_CAUSE, &elmer);
+ elmer |= ELMER0_GP_BIT6;
+ t1_tpi_write(cphy->adapter, A_ELMER0_INT_CAUSE, elmer);
+ return 0;
+}
+
+static int mv88x201x_interrupt_handler(struct cphy *cphy)
+{
+ /* Clear interrupts */
+ mv88x201x_interrupt_clear(cphy);
+
+ /* We have only enabled link change interrupts and so
+ * cphy_cause must be a link change interrupt.
+ */
+ return cphy_cause_link_change;
+}
+
+static int mv88x201x_set_loopback(struct cphy *cphy, int on)
+{
+ return 0;
+}
+
+static int mv88x201x_get_link_status(struct cphy *cphy, int *link_ok,
+ int *speed, int *duplex, int *fc)
+{
+ u32 val = 0;
+#define LINK_STATUS_BIT 0x4
+
+ if (link_ok) {
+ /* Read link status. */
+ mdio_read(cphy, 0x1, 0x1, &val);
+ val &= LINK_STATUS_BIT;
+ *link_ok = (val == LINK_STATUS_BIT);
+ /* Turn on/off Link LED */
+ led_link(cphy, *link_ok);
+ }
+ if (speed)
+ *speed = SPEED_10000;
+ if (duplex)
+ *duplex = DUPLEX_FULL;
+ if (fc)
+ *fc = PAUSE_RX | PAUSE_TX;
+ return 0;
+}
+
+static void mv88x201x_destroy(struct cphy *cphy)
+{
+ kfree(cphy);
+}
+
+static struct cphy_ops mv88x201x_ops = {
+ .destroy = mv88x201x_destroy,
+ .reset = mv88x201x_reset,
+ .interrupt_enable = mv88x201x_interrupt_enable,
+ .interrupt_disable = mv88x201x_interrupt_disable,
+ .interrupt_clear = mv88x201x_interrupt_clear,
+ .interrupt_handler = mv88x201x_interrupt_handler,
+ .get_link_status = mv88x201x_get_link_status,
+ .set_loopback = mv88x201x_set_loopback,
+};
+
+static struct cphy *mv88x201x_phy_create(adapter_t *adapter, int phy_addr,
+ struct mdio_ops *mdio_ops)
+{
+ u32 val;
+ struct cphy *cphy = kmalloc(sizeof(*cphy), GFP_KERNEL);
+
+ if (!cphy)
+ return NULL;
+ memset(cphy, 0, sizeof(*cphy));
+ cphy_init(cphy, adapter, phy_addr, &mv88x201x_ops, mdio_ops);
+
+ /* Commands the PHY to enable XFP's clock. */
+ mdio_read(cphy, 0x3, 0x8300, &val);
+ mdio_write(cphy, 0x3, 0x8300, val | 1);
+
+ /* Clear link status. Required because of a bug in the PHY. */
+ mdio_read(cphy, 0x1, 0x8, &val);
+ mdio_read(cphy, 0x3, 0x8, &val);
+
+ /* Allows for Link,Ack LED turn on/off */
+ led_init(cphy);
+ return cphy;
+}
+
+/* Chip Reset */
+static int mv88x201x_phy_reset(adapter_t *adapter)
+{
+ u32 val;
+
+ t1_tpi_read(adapter, A_ELMER0_GPO, &val);
+ val &= ~4;
+ t1_tpi_write(adapter, A_ELMER0_GPO, val);
+ msleep(100);
+
+ t1_tpi_write(adapter, A_ELMER0_GPO, val | 4);
+ msleep(1000);
+
+ /* Now lets enable the Laser. Delay 100us */
+ t1_tpi_read(adapter, A_ELMER0_GPO, &val);
+ val |= 0x8000;
+ t1_tpi_write(adapter, A_ELMER0_GPO, val);
+ udelay(100);
+ return 0;
+}
+
+struct gphy t1_mv88x201x_ops = {
+ mv88x201x_phy_create,
+ mv88x201x_phy_reset
+};
diff --git a/drivers/net/chelsio/pm3393.c b/drivers/net/chelsio/pm3393.c
new file mode 100644
index 00000000000..04a1404fc65
--- /dev/null
+++ b/drivers/net/chelsio/pm3393.c
@@ -0,0 +1,826 @@
+/*****************************************************************************
+ * *
+ * File: pm3393.c *
+ * $Revision: 1.16 $ *
+ * $Date: 2005/05/14 00:59:32 $ *
+ * Description: *
+ * PMC/SIERRA (pm3393) MAC-PHY functionality. *
+ * part of the Chelsio 10Gb Ethernet Driver. *
+ * *
+ * This program is free software; you can redistribute it and/or modify *
+ * it under the terms of the GNU General Public License, version 2, as *
+ * published by the Free Software Foundation. *
+ * *
+ * You should have received a copy of the GNU General Public License along *
+ * with this program; if not, write to the Free Software Foundation, Inc., *
+ * 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. *
+ * *
+ * THIS SOFTWARE IS PROVIDED ``AS IS'' AND WITHOUT ANY EXPRESS OR IMPLIED *
+ * WARRANTIES, INCLUDING, WITHOUT LIMITATION, THE IMPLIED WARRANTIES OF *
+ * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. *
+ * *
+ * http://www.chelsio.com *
+ * *
+ * Copyright (c) 2003 - 2005 Chelsio Communications, Inc. *
+ * All rights reserved. *
+ * *
+ * Maintainers: maintainers@chelsio.com *
+ * *
+ * Authors: Dimitrios Michailidis <dm@chelsio.com> *
+ * Tina Yang <tainay@chelsio.com> *
+ * Felix Marti <felix@chelsio.com> *
+ * Scott Bardone <sbardone@chelsio.com> *
+ * Kurt Ottaway <kottaway@chelsio.com> *
+ * Frank DiMambro <frank@chelsio.com> *
+ * *
+ * History: *
+ * *
+ ****************************************************************************/
+
+#include "common.h"
+#include "regs.h"
+#include "gmac.h"
+#include "elmer0.h"
+#include "suni1x10gexp_regs.h"
+
+/* 802.3ae 10Gb/s MDIO Manageable Device(MMD)
+ */
+enum {
+ MMD_RESERVED,
+ MMD_PMAPMD,
+ MMD_WIS,
+ MMD_PCS,
+ MMD_PHY_XGXS, /* XGMII Extender Sublayer */
+ MMD_DTE_XGXS,
+};
+
+enum {
+ PHY_XGXS_CTRL_1,
+ PHY_XGXS_STATUS_1
+};
+
+#define OFFSET(REG_ADDR) (REG_ADDR << 2)
+
+/* Max frame size PM3393 can handle. Includes Ethernet header and CRC. */
+#define MAX_FRAME_SIZE 9600
+
+#define IPG 12
+#define TXXG_CONF1_VAL ((IPG << SUNI1x10GEXP_BITOFF_TXXG_IPGT) | \
+ SUNI1x10GEXP_BITMSK_TXXG_32BIT_ALIGN | SUNI1x10GEXP_BITMSK_TXXG_CRCEN | \
+ SUNI1x10GEXP_BITMSK_TXXG_PADEN)
+#define RXXG_CONF1_VAL (SUNI1x10GEXP_BITMSK_RXXG_PUREP | 0x14 | \
+ SUNI1x10GEXP_BITMSK_RXXG_FLCHK | SUNI1x10GEXP_BITMSK_RXXG_CRC_STRIP)
+
+/* Update statistics every 15 minutes */
+#define STATS_TICK_SECS (15 * 60)
+
+enum { /* RMON registers */
+ RxOctetsReceivedOK = SUNI1x10GEXP_REG_MSTAT_COUNTER_1_LOW,
+ RxUnicastFramesReceivedOK = SUNI1x10GEXP_REG_MSTAT_COUNTER_4_LOW,
+ RxMulticastFramesReceivedOK = SUNI1x10GEXP_REG_MSTAT_COUNTER_5_LOW,
+ RxBroadcastFramesReceivedOK = SUNI1x10GEXP_REG_MSTAT_COUNTER_6_LOW,
+ RxPAUSEMACCtrlFramesReceived = SUNI1x10GEXP_REG_MSTAT_COUNTER_8_LOW,
+ RxFrameCheckSequenceErrors = SUNI1x10GEXP_REG_MSTAT_COUNTER_10_LOW,
+ RxFramesLostDueToInternalMACErrors = SUNI1x10GEXP_REG_MSTAT_COUNTER_11_LOW,
+ RxSymbolErrors = SUNI1x10GEXP_REG_MSTAT_COUNTER_12_LOW,
+ RxInRangeLengthErrors = SUNI1x10GEXP_REG_MSTAT_COUNTER_13_LOW,
+ RxFramesTooLongErrors = SUNI1x10GEXP_REG_MSTAT_COUNTER_15_LOW,
+ RxJabbers = SUNI1x10GEXP_REG_MSTAT_COUNTER_16_LOW,
+ RxFragments = SUNI1x10GEXP_REG_MSTAT_COUNTER_17_LOW,
+ RxUndersizedFrames = SUNI1x10GEXP_REG_MSTAT_COUNTER_18_LOW,
+
+ TxOctetsTransmittedOK = SUNI1x10GEXP_REG_MSTAT_COUNTER_33_LOW,
+ TxFramesLostDueToInternalMACTransmissionError = SUNI1x10GEXP_REG_MSTAT_COUNTER_35_LOW,
+ TxTransmitSystemError = SUNI1x10GEXP_REG_MSTAT_COUNTER_36_LOW,
+ TxUnicastFramesTransmittedOK = SUNI1x10GEXP_REG_MSTAT_COUNTER_38_LOW,
+ TxMulticastFramesTransmittedOK = SUNI1x10GEXP_REG_MSTAT_COUNTER_40_LOW,
+ TxBroadcastFramesTransmittedOK = SUNI1x10GEXP_REG_MSTAT_COUNTER_42_LOW,
+ TxPAUSEMACCtrlFramesTransmitted = SUNI1x10GEXP_REG_MSTAT_COUNTER_43_LOW
+};
+
+struct _cmac_instance {
+ u8 enabled;
+ u8 fc;
+ u8 mac_addr[6];
+};
+
+static int pmread(struct cmac *cmac, u32 reg, u32 * data32)
+{
+ t1_tpi_read(cmac->adapter, OFFSET(reg), data32);
+ return 0;
+}
+
+static int pmwrite(struct cmac *cmac, u32 reg, u32 data32)
+{
+ t1_tpi_write(cmac->adapter, OFFSET(reg), data32);
+ return 0;
+}
+
+/* Port reset. */
+static int pm3393_reset(struct cmac *cmac)
+{
+ return 0;
+}
+
+/*
+ * Enable interrupts for the PM3393
+
+ 1. Enable PM3393 BLOCK interrupts.
+ 2. Enable PM3393 Master Interrupt bit(INTE)
+ 3. Enable ELMER's PM3393 bit.
+ 4. Enable Terminator external interrupt.
+*/
+static int pm3393_interrupt_enable(struct cmac *cmac)
+{
+ u32 pl_intr;
+
+ /* PM3393 - Enabling all hardware block interrupts.
+ */
+ pmwrite(cmac, SUNI1x10GEXP_REG_SERDES_3125_INTERRUPT_ENABLE, 0xffff);
+ pmwrite(cmac, SUNI1x10GEXP_REG_XRF_INTERRUPT_ENABLE, 0xffff);
+ pmwrite(cmac, SUNI1x10GEXP_REG_XRF_DIAG_INTERRUPT_ENABLE, 0xffff);
+ pmwrite(cmac, SUNI1x10GEXP_REG_RXOAM_INTERRUPT_ENABLE, 0xffff);
+
+ /* Don't interrupt on statistics overflow, we are polling */
+ pmwrite(cmac, SUNI1x10GEXP_REG_MSTAT_INTERRUPT_MASK_0, 0);
+ pmwrite(cmac, SUNI1x10GEXP_REG_MSTAT_INTERRUPT_MASK_1, 0);
+ pmwrite(cmac, SUNI1x10GEXP_REG_MSTAT_INTERRUPT_MASK_2, 0);
+ pmwrite(cmac, SUNI1x10GEXP_REG_MSTAT_INTERRUPT_MASK_3, 0);
+
+ pmwrite(cmac, SUNI1x10GEXP_REG_IFLX_FIFO_OVERFLOW_ENABLE, 0xffff);
+ pmwrite(cmac, SUNI1x10GEXP_REG_PL4ODP_INTERRUPT_MASK, 0xffff);
+ pmwrite(cmac, SUNI1x10GEXP_REG_XTEF_INTERRUPT_ENABLE, 0xffff);
+ pmwrite(cmac, SUNI1x10GEXP_REG_TXOAM_INTERRUPT_ENABLE, 0xffff);
+ pmwrite(cmac, SUNI1x10GEXP_REG_RXXG_CONFIG_3, 0xffff);
+ pmwrite(cmac, SUNI1x10GEXP_REG_PL4IO_LOCK_DETECT_MASK, 0xffff);
+ pmwrite(cmac, SUNI1x10GEXP_REG_TXXG_CONFIG_3, 0xffff);
+ pmwrite(cmac, SUNI1x10GEXP_REG_PL4IDU_INTERRUPT_MASK, 0xffff);
+ pmwrite(cmac, SUNI1x10GEXP_REG_EFLX_FIFO_OVERFLOW_ERROR_ENABLE, 0xffff);
+
+ /* PM3393 - Global interrupt enable
+ */
+ /* TBD XXX Disable for now until we figure out why error interrupts keep asserting. */
+ pmwrite(cmac, SUNI1x10GEXP_REG_GLOBAL_INTERRUPT_ENABLE,
+ 0 /*SUNI1x10GEXP_BITMSK_TOP_INTE */ );
+
+ /* TERMINATOR - PL_INTERUPTS_EXT */
+ pl_intr = readl(cmac->adapter->regs + A_PL_ENABLE);
+ pl_intr |= F_PL_INTR_EXT;
+ writel(pl_intr, cmac->adapter->regs + A_PL_ENABLE);
+ return 0;
+}
+
+static int pm3393_interrupt_disable(struct cmac *cmac)
+{
+ u32 elmer;
+
+ /* PM3393 - Enabling HW interrupt blocks. */
+ pmwrite(cmac, SUNI1x10GEXP_REG_SERDES_3125_INTERRUPT_ENABLE, 0);
+ pmwrite(cmac, SUNI1x10GEXP_REG_XRF_INTERRUPT_ENABLE, 0);
+ pmwrite(cmac, SUNI1x10GEXP_REG_XRF_DIAG_INTERRUPT_ENABLE, 0);
+ pmwrite(cmac, SUNI1x10GEXP_REG_RXOAM_INTERRUPT_ENABLE, 0);
+ pmwrite(cmac, SUNI1x10GEXP_REG_MSTAT_INTERRUPT_MASK_0, 0);
+ pmwrite(cmac, SUNI1x10GEXP_REG_MSTAT_INTERRUPT_MASK_1, 0);
+ pmwrite(cmac, SUNI1x10GEXP_REG_MSTAT_INTERRUPT_MASK_2, 0);
+ pmwrite(cmac, SUNI1x10GEXP_REG_MSTAT_INTERRUPT_MASK_3, 0);
+ pmwrite(cmac, SUNI1x10GEXP_REG_IFLX_FIFO_OVERFLOW_ENABLE, 0);
+ pmwrite(cmac, SUNI1x10GEXP_REG_PL4ODP_INTERRUPT_MASK, 0);
+ pmwrite(cmac, SUNI1x10GEXP_REG_XTEF_INTERRUPT_ENABLE, 0);
+ pmwrite(cmac, SUNI1x10GEXP_REG_TXOAM_INTERRUPT_ENABLE, 0);
+ pmwrite(cmac, SUNI1x10GEXP_REG_RXXG_CONFIG_3, 0);
+ pmwrite(cmac, SUNI1x10GEXP_REG_PL4IO_LOCK_DETECT_MASK, 0);
+ pmwrite(cmac, SUNI1x10GEXP_REG_TXXG_CONFIG_3, 0);
+ pmwrite(cmac, SUNI1x10GEXP_REG_PL4IDU_INTERRUPT_MASK, 0);
+ pmwrite(cmac, SUNI1x10GEXP_REG_EFLX_FIFO_OVERFLOW_ERROR_ENABLE, 0);
+
+ /* PM3393 - Global interrupt enable */
+ pmwrite(cmac, SUNI1x10GEXP_REG_GLOBAL_INTERRUPT_ENABLE, 0);
+
+ /* ELMER - External chip interrupts. */
+ t1_tpi_read(cmac->adapter, A_ELMER0_INT_ENABLE, &elmer);
+ elmer &= ~ELMER0_GP_BIT1;
+ t1_tpi_write(cmac->adapter, A_ELMER0_INT_ENABLE, elmer);
+
+ /* TERMINATOR - PL_INTERUPTS_EXT */
+ /* DO NOT DISABLE TERMINATOR's EXTERNAL INTERRUPTS. ANOTHER CHIP
+ * COULD WANT THEM ENABLED. We disable PM3393 at the ELMER level.
+ */
+
+ return 0;
+}
+
+static int pm3393_interrupt_clear(struct cmac *cmac)
+{
+ u32 elmer;
+ u32 pl_intr;
+ u32 val32;
+
+ /* PM3393 - Clearing HW interrupt blocks. Note, this assumes
+ * bit WCIMODE=0 for a clear-on-read.
+ */
+ pmread(cmac, SUNI1x10GEXP_REG_SERDES_3125_INTERRUPT_STATUS, &val32);
+ pmread(cmac, SUNI1x10GEXP_REG_XRF_INTERRUPT_STATUS, &val32);
+ pmread(cmac, SUNI1x10GEXP_REG_XRF_DIAG_INTERRUPT_STATUS, &val32);
+ pmread(cmac, SUNI1x10GEXP_REG_RXOAM_INTERRUPT_STATUS, &val32);
+ pmread(cmac, SUNI1x10GEXP_REG_PL4ODP_INTERRUPT, &val32);
+ pmread(cmac, SUNI1x10GEXP_REG_XTEF_INTERRUPT_STATUS, &val32);
+ pmread(cmac, SUNI1x10GEXP_REG_IFLX_FIFO_OVERFLOW_INTERRUPT, &val32);
+ pmread(cmac, SUNI1x10GEXP_REG_TXOAM_INTERRUPT_STATUS, &val32);
+ pmread(cmac, SUNI1x10GEXP_REG_RXXG_INTERRUPT, &val32);
+ pmread(cmac, SUNI1x10GEXP_REG_TXXG_INTERRUPT, &val32);
+ pmread(cmac, SUNI1x10GEXP_REG_PL4IDU_INTERRUPT, &val32);
+ pmread(cmac, SUNI1x10GEXP_REG_EFLX_FIFO_OVERFLOW_ERROR_INDICATION,
+ &val32);
+ pmread(cmac, SUNI1x10GEXP_REG_PL4IO_LOCK_DETECT_STATUS, &val32);
+ pmread(cmac, SUNI1x10GEXP_REG_PL4IO_LOCK_DETECT_CHANGE, &val32);
+
+ /* PM3393 - Global interrupt status
+ */
+ pmread(cmac, SUNI1x10GEXP_REG_MASTER_INTERRUPT_STATUS, &val32);
+
+ /* ELMER - External chip interrupts.
+ */
+ t1_tpi_read(cmac->adapter, A_ELMER0_INT_CAUSE, &elmer);
+ elmer |= ELMER0_GP_BIT1;
+ t1_tpi_write(cmac->adapter, A_ELMER0_INT_CAUSE, elmer);
+
+ /* TERMINATOR - PL_INTERUPTS_EXT
+ */
+ pl_intr = readl(cmac->adapter->regs + A_PL_CAUSE);
+ pl_intr |= F_PL_INTR_EXT;
+ writel(pl_intr, cmac->adapter->regs + A_PL_CAUSE);
+
+ return 0;
+}
+
+/* Interrupt handler */
+static int pm3393_interrupt_handler(struct cmac *cmac)
+{
+ u32 master_intr_status;
+/*
+ 1. Read master interrupt register.
+ 2. Read BLOCK's interrupt status registers.
+ 3. Handle BLOCK interrupts.
+*/
+ /* Read the master interrupt status register. */
+ pmread(cmac, SUNI1x10GEXP_REG_MASTER_INTERRUPT_STATUS,
+ &master_intr_status);
+
+ /* TBD XXX Lets just clear everything for now */
+ pm3393_interrupt_clear(cmac);
+
+ return 0;
+}
+
+static int pm3393_enable(struct cmac *cmac, int which)
+{
+ if (which & MAC_DIRECTION_RX)
+ pmwrite(cmac, SUNI1x10GEXP_REG_RXXG_CONFIG_1,
+ (RXXG_CONF1_VAL | SUNI1x10GEXP_BITMSK_RXXG_RXEN));
+
+ if (which & MAC_DIRECTION_TX) {
+ u32 val = TXXG_CONF1_VAL | SUNI1x10GEXP_BITMSK_TXXG_TXEN0;
+
+ if (cmac->instance->fc & PAUSE_RX)
+ val |= SUNI1x10GEXP_BITMSK_TXXG_FCRX;
+ if (cmac->instance->fc & PAUSE_TX)
+ val |= SUNI1x10GEXP_BITMSK_TXXG_FCTX;
+ pmwrite(cmac, SUNI1x10GEXP_REG_TXXG_CONFIG_1, val);
+ }
+
+ cmac->instance->enabled |= which;
+ return 0;
+}
+
+static int pm3393_enable_port(struct cmac *cmac, int which)
+{
+ /* Clear port statistics */
+ pmwrite(cmac, SUNI1x10GEXP_REG_MSTAT_CONTROL,
+ SUNI1x10GEXP_BITMSK_MSTAT_CLEAR);
+ udelay(2);
+ memset(&cmac->stats, 0, sizeof(struct cmac_statistics));
+
+ pm3393_enable(cmac, which);
+
+ /*
+ * XXX This should be done by the PHY and preferrably not at all.
+ * The PHY doesn't give us link status indication on its own so have
+ * the link management code query it instead.
+ */
+ {
+ extern void link_changed(adapter_t *adapter, int port_id);
+
+ link_changed(cmac->adapter, 0);
+ }
+ return 0;
+}
+
+static int pm3393_disable(struct cmac *cmac, int which)
+{
+ if (which & MAC_DIRECTION_RX)
+ pmwrite(cmac, SUNI1x10GEXP_REG_RXXG_CONFIG_1, RXXG_CONF1_VAL);
+ if (which & MAC_DIRECTION_TX)
+ pmwrite(cmac, SUNI1x10GEXP_REG_TXXG_CONFIG_1, TXXG_CONF1_VAL);
+
+ /*
+ * The disable is graceful. Give the PM3393 time. Can't wait very
+ * long here, we may be holding locks.
+ */
+ udelay(20);
+
+ cmac->instance->enabled &= ~which;
+ return 0;
+}
+
+static int pm3393_loopback_enable(struct cmac *cmac)
+{
+ return 0;
+}
+
+static int pm3393_loopback_disable(struct cmac *cmac)
+{
+ return 0;
+}
+
+static int pm3393_set_mtu(struct cmac *cmac, int mtu)
+{
+ int enabled = cmac->instance->enabled;
+
+ /* MAX_FRAME_SIZE includes header + FCS, mtu doesn't */
+ mtu += 14 + 4;
+ if (mtu > MAX_FRAME_SIZE)
+ return -EINVAL;
+
+ /* Disable Rx/Tx MAC before configuring it. */
+ if (enabled)
+ pm3393_disable(cmac, MAC_DIRECTION_RX | MAC_DIRECTION_TX);
+
+ pmwrite(cmac, SUNI1x10GEXP_REG_RXXG_MAX_FRAME_LENGTH, mtu);
+ pmwrite(cmac, SUNI1x10GEXP_REG_TXXG_MAX_FRAME_SIZE, mtu);
+
+ if (enabled)
+ pm3393_enable(cmac, enabled);
+ return 0;
+}
+
+static u32 calc_crc(u8 *b, int len)
+{
+ int i;
+ u32 crc = (u32)~0;
+
+ /* calculate crc one bit at a time */
+ while (len--) {
+ crc ^= *b++;
+ for (i = 0; i < 8; i++) {
+ if (crc & 0x1)
+ crc = (crc >> 1) ^ 0xedb88320;
+ else
+ crc = (crc >> 1);
+ }
+ }
+
+ /* reverse bits */
+ crc = ((crc >> 4) & 0x0f0f0f0f) | ((crc << 4) & 0xf0f0f0f0);
+ crc = ((crc >> 2) & 0x33333333) | ((crc << 2) & 0xcccccccc);
+ crc = ((crc >> 1) & 0x55555555) | ((crc << 1) & 0xaaaaaaaa);
+ /* swap bytes */
+ crc = (crc >> 16) | (crc << 16);
+ crc = (crc >> 8 & 0x00ff00ff) | (crc << 8 & 0xff00ff00);
+
+ return crc;
+}
+
+static int pm3393_set_rx_mode(struct cmac *cmac, struct t1_rx_mode *rm)
+{
+ int enabled = cmac->instance->enabled & MAC_DIRECTION_RX;
+ u32 rx_mode;
+
+ /* Disable MAC RX before reconfiguring it */
+ if (enabled)
+ pm3393_disable(cmac, MAC_DIRECTION_RX);
+
+ pmread(cmac, SUNI1x10GEXP_REG_RXXG_ADDRESS_FILTER_CONTROL_2, &rx_mode);
+ rx_mode &= ~(SUNI1x10GEXP_BITMSK_RXXG_PMODE |
+ SUNI1x10GEXP_BITMSK_RXXG_MHASH_EN);
+ pmwrite(cmac, SUNI1x10GEXP_REG_RXXG_ADDRESS_FILTER_CONTROL_2,
+ (u16)rx_mode);
+
+ if (t1_rx_mode_promisc(rm)) {
+ /* Promiscuous mode. */
+ rx_mode |= SUNI1x10GEXP_BITMSK_RXXG_PMODE;
+ }
+ if (t1_rx_mode_allmulti(rm)) {
+ /* Accept all multicast. */
+ pmwrite(cmac, SUNI1x10GEXP_REG_RXXG_MULTICAST_HASH_LOW, 0xffff);
+ pmwrite(cmac, SUNI1x10GEXP_REG_RXXG_MULTICAST_HASH_MIDLOW, 0xffff);
+ pmwrite(cmac, SUNI1x10GEXP_REG_RXXG_MULTICAST_HASH_MIDHIGH, 0xffff);
+ pmwrite(cmac, SUNI1x10GEXP_REG_RXXG_MULTICAST_HASH_HIGH, 0xffff);
+ rx_mode |= SUNI1x10GEXP_BITMSK_RXXG_MHASH_EN;
+ } else if (t1_rx_mode_mc_cnt(rm)) {
+ /* Accept one or more multicast(s). */
+ u8 *addr;
+ int bit;
+ u16 mc_filter[4] = { 0, };
+
+ while ((addr = t1_get_next_mcaddr(rm))) {
+ bit = (calc_crc(addr, ETH_ALEN) >> 23) & 0x3f; /* bit[23:28] */
+ mc_filter[bit >> 4] |= 1 << (bit & 0xf);
+ }
+ pmwrite(cmac, SUNI1x10GEXP_REG_RXXG_MULTICAST_HASH_LOW, mc_filter[0]);
+ pmwrite(cmac, SUNI1x10GEXP_REG_RXXG_MULTICAST_HASH_MIDLOW, mc_filter[1]);
+ pmwrite(cmac, SUNI1x10GEXP_REG_RXXG_MULTICAST_HASH_MIDHIGH, mc_filter[2]);
+ pmwrite(cmac, SUNI1x10GEXP_REG_RXXG_MULTICAST_HASH_HIGH, mc_filter[3]);
+ rx_mode |= SUNI1x10GEXP_BITMSK_RXXG_MHASH_EN;
+ }
+
+ pmwrite(cmac, SUNI1x10GEXP_REG_RXXG_ADDRESS_FILTER_CONTROL_2, (u16)rx_mode);
+
+ if (enabled)
+ pm3393_enable(cmac, MAC_DIRECTION_RX);
+
+ return 0;
+}
+
+static int pm3393_get_speed_duplex_fc(struct cmac *cmac, int *speed,
+ int *duplex, int *fc)
+{
+ if (speed)
+ *speed = SPEED_10000;
+ if (duplex)
+ *duplex = DUPLEX_FULL;
+ if (fc)
+ *fc = cmac->instance->fc;
+ return 0;
+}
+
+static int pm3393_set_speed_duplex_fc(struct cmac *cmac, int speed, int duplex,
+ int fc)
+{
+ if (speed >= 0 && speed != SPEED_10000)
+ return -1;
+ if (duplex >= 0 && duplex != DUPLEX_FULL)
+ return -1;
+ if (fc & ~(PAUSE_TX | PAUSE_RX))
+ return -1;
+
+ if (fc != cmac->instance->fc) {
+ cmac->instance->fc = (u8) fc;
+ if (cmac->instance->enabled & MAC_DIRECTION_TX)
+ pm3393_enable(cmac, MAC_DIRECTION_TX);
+ }
+ return 0;
+}
+
+#define RMON_UPDATE(mac, name, stat_name) \
+ { \
+ t1_tpi_read((mac)->adapter, OFFSET(name), &val0); \
+ t1_tpi_read((mac)->adapter, OFFSET(((name)+1)), &val1); \
+ t1_tpi_read((mac)->adapter, OFFSET(((name)+2)), &val2); \
+ (mac)->stats.stat_name = ((u64)val0 & 0xffff) | \
+ (((u64)val1 & 0xffff) << 16) | \
+ (((u64)val2 & 0xff) << 32) | \
+ ((mac)->stats.stat_name & \
+ (~(u64)0 << 40)); \
+ if (ro & \
+ ((name - SUNI1x10GEXP_REG_MSTAT_COUNTER_0_LOW) >> 2)) \
+ (mac)->stats.stat_name += ((u64)1 << 40); \
+ }
+
+static const struct cmac_statistics *pm3393_update_statistics(struct cmac *mac,
+ int flag)
+{
+ u64 ro;
+ u32 val0, val1, val2, val3;
+
+ /* Snap the counters */
+ pmwrite(mac, SUNI1x10GEXP_REG_MSTAT_CONTROL,
+ SUNI1x10GEXP_BITMSK_MSTAT_SNAP);
+
+ /* Counter rollover, clear on read */
+ pmread(mac, SUNI1x10GEXP_REG_MSTAT_COUNTER_ROLLOVER_0, &val0);
+ pmread(mac, SUNI1x10GEXP_REG_MSTAT_COUNTER_ROLLOVER_1, &val1);
+ pmread(mac, SUNI1x10GEXP_REG_MSTAT_COUNTER_ROLLOVER_2, &val2);
+ pmread(mac, SUNI1x10GEXP_REG_MSTAT_COUNTER_ROLLOVER_3, &val3);
+ ro = ((u64)val0 & 0xffff) | (((u64)val1 & 0xffff) << 16) |
+ (((u64)val2 & 0xffff) << 32) | (((u64)val3 & 0xffff) << 48);
+
+ /* Rx stats */
+ RMON_UPDATE(mac, RxOctetsReceivedOK, RxOctetsOK);
+ RMON_UPDATE(mac, RxUnicastFramesReceivedOK, RxUnicastFramesOK);
+ RMON_UPDATE(mac, RxMulticastFramesReceivedOK, RxMulticastFramesOK);
+ RMON_UPDATE(mac, RxBroadcastFramesReceivedOK, RxBroadcastFramesOK);
+ RMON_UPDATE(mac, RxPAUSEMACCtrlFramesReceived, RxPauseFrames);
+ RMON_UPDATE(mac, RxFrameCheckSequenceErrors, RxFCSErrors);
+ RMON_UPDATE(mac, RxFramesLostDueToInternalMACErrors,
+ RxInternalMACRcvError);
+ RMON_UPDATE(mac, RxSymbolErrors, RxSymbolErrors);
+ RMON_UPDATE(mac, RxInRangeLengthErrors, RxInRangeLengthErrors);
+ RMON_UPDATE(mac, RxFramesTooLongErrors , RxFrameTooLongErrors);
+ RMON_UPDATE(mac, RxJabbers, RxJabberErrors);
+ RMON_UPDATE(mac, RxFragments, RxRuntErrors);
+ RMON_UPDATE(mac, RxUndersizedFrames, RxRuntErrors);
+
+ /* Tx stats */
+ RMON_UPDATE(mac, TxOctetsTransmittedOK, TxOctetsOK);
+ RMON_UPDATE(mac, TxFramesLostDueToInternalMACTransmissionError,
+ TxInternalMACXmitError);
+ RMON_UPDATE(mac, TxTransmitSystemError, TxFCSErrors);
+ RMON_UPDATE(mac, TxUnicastFramesTransmittedOK, TxUnicastFramesOK);
+ RMON_UPDATE(mac, TxMulticastFramesTransmittedOK, TxMulticastFramesOK);
+ RMON_UPDATE(mac, TxBroadcastFramesTransmittedOK, TxBroadcastFramesOK);
+ RMON_UPDATE(mac, TxPAUSEMACCtrlFramesTransmitted, TxPauseFrames);
+
+ return &mac->stats;
+}
+
+static int pm3393_macaddress_get(struct cmac *cmac, u8 mac_addr[6])
+{
+ memcpy(mac_addr, cmac->instance->mac_addr, 6);
+ return 0;
+}
+
+static int pm3393_macaddress_set(struct cmac *cmac, u8 ma[6])
+{
+ u32 val, lo, mid, hi, enabled = cmac->instance->enabled;
+
+ /*
+ * MAC addr: 00:07:43:00:13:09
+ *
+ * ma[5] = 0x09
+ * ma[4] = 0x13
+ * ma[3] = 0x00
+ * ma[2] = 0x43
+ * ma[1] = 0x07
+ * ma[0] = 0x00
+ *
+ * The PM3393 requires byte swapping and reverse order entry
+ * when programming MAC addresses:
+ *
+ * low_bits[15:0] = ma[1]:ma[0]
+ * mid_bits[31:16] = ma[3]:ma[2]
+ * high_bits[47:32] = ma[5]:ma[4]
+ */
+
+ /* Store local copy */
+ memcpy(cmac->instance->mac_addr, ma, 6);
+
+ lo = ((u32) ma[1] << 8) | (u32) ma[0];
+ mid = ((u32) ma[3] << 8) | (u32) ma[2];
+ hi = ((u32) ma[5] << 8) | (u32) ma[4];
+
+ /* Disable Rx/Tx MAC before configuring it. */
+ if (enabled)
+ pm3393_disable(cmac, MAC_DIRECTION_RX | MAC_DIRECTION_TX);
+
+ /* Set RXXG Station Address */
+ pmwrite(cmac, SUNI1x10GEXP_REG_RXXG_SA_15_0, lo);
+ pmwrite(cmac, SUNI1x10GEXP_REG_RXXG_SA_31_16, mid);
+ pmwrite(cmac, SUNI1x10GEXP_REG_RXXG_SA_47_32, hi);
+
+ /* Set TXXG Station Address */
+ pmwrite(cmac, SUNI1x10GEXP_REG_TXXG_SA_15_0, lo);
+ pmwrite(cmac, SUNI1x10GEXP_REG_TXXG_SA_31_16, mid);
+ pmwrite(cmac, SUNI1x10GEXP_REG_TXXG_SA_47_32, hi);
+
+ /* Setup Exact Match Filter 1 with our MAC address
+ *
+ * Must disable exact match filter before configuring it.
+ */
+ pmread(cmac, SUNI1x10GEXP_REG_RXXG_ADDRESS_FILTER_CONTROL_0, &val);
+ val &= 0xff0f;
+ pmwrite(cmac, SUNI1x10GEXP_REG_RXXG_ADDRESS_FILTER_CONTROL_0, val);
+
+ pmwrite(cmac, SUNI1x10GEXP_REG_RXXG_EXACT_MATCH_ADDR_1_LOW, lo);
+ pmwrite(cmac, SUNI1x10GEXP_REG_RXXG_EXACT_MATCH_ADDR_1_MID, mid);
+ pmwrite(cmac, SUNI1x10GEXP_REG_RXXG_EXACT_MATCH_ADDR_1_HIGH, hi);
+
+ val |= 0x0090;
+ pmwrite(cmac, SUNI1x10GEXP_REG_RXXG_ADDRESS_FILTER_CONTROL_0, val);
+
+ if (enabled)
+ pm3393_enable(cmac, enabled);
+ return 0;
+}
+
+static void pm3393_destroy(struct cmac *cmac)
+{
+ kfree(cmac);
+}
+
+static struct cmac_ops pm3393_ops = {
+ .destroy = pm3393_destroy,
+ .reset = pm3393_reset,
+ .interrupt_enable = pm3393_interrupt_enable,
+ .interrupt_disable = pm3393_interrupt_disable,
+ .interrupt_clear = pm3393_interrupt_clear,
+ .interrupt_handler = pm3393_interrupt_handler,
+ .enable = pm3393_enable_port,
+ .disable = pm3393_disable,
+ .loopback_enable = pm3393_loopback_enable,
+ .loopback_disable = pm3393_loopback_disable,
+ .set_mtu = pm3393_set_mtu,
+ .set_rx_mode = pm3393_set_rx_mode,
+ .get_speed_duplex_fc = pm3393_get_speed_duplex_fc,
+ .set_speed_duplex_fc = pm3393_set_speed_duplex_fc,
+ .statistics_update = pm3393_update_statistics,
+ .macaddress_get = pm3393_macaddress_get,
+ .macaddress_set = pm3393_macaddress_set
+};
+
+static struct cmac *pm3393_mac_create(adapter_t *adapter, int index)
+{
+ struct cmac *cmac;
+
+ cmac = kmalloc(sizeof(*cmac) + sizeof(cmac_instance), GFP_KERNEL);
+ if (!cmac)
+ return NULL;
+ memset(cmac, 0, sizeof(*cmac));
+
+ cmac->ops = &pm3393_ops;
+ cmac->instance = (cmac_instance *) (cmac + 1);
+ cmac->adapter = adapter;
+ cmac->instance->fc = PAUSE_TX | PAUSE_RX;
+
+ t1_tpi_write(adapter, OFFSET(0x0001), 0x00008000);
+ t1_tpi_write(adapter, OFFSET(0x0001), 0x00000000);
+ t1_tpi_write(adapter, OFFSET(0x2308), 0x00009800);
+ t1_tpi_write(adapter, OFFSET(0x2305), 0x00001001); /* PL4IO Enable */
+ t1_tpi_write(adapter, OFFSET(0x2320), 0x00008800);
+ t1_tpi_write(adapter, OFFSET(0x2321), 0x00008800);
+ t1_tpi_write(adapter, OFFSET(0x2322), 0x00008800);
+ t1_tpi_write(adapter, OFFSET(0x2323), 0x00008800);
+ t1_tpi_write(adapter, OFFSET(0x2324), 0x00008800);
+ t1_tpi_write(adapter, OFFSET(0x2325), 0x00008800);
+ t1_tpi_write(adapter, OFFSET(0x2326), 0x00008800);
+ t1_tpi_write(adapter, OFFSET(0x2327), 0x00008800);
+ t1_tpi_write(adapter, OFFSET(0x2328), 0x00008800);
+ t1_tpi_write(adapter, OFFSET(0x2329), 0x00008800);
+ t1_tpi_write(adapter, OFFSET(0x232a), 0x00008800);
+ t1_tpi_write(adapter, OFFSET(0x232b), 0x00008800);
+ t1_tpi_write(adapter, OFFSET(0x232c), 0x00008800);
+ t1_tpi_write(adapter, OFFSET(0x232d), 0x00008800);
+ t1_tpi_write(adapter, OFFSET(0x232e), 0x00008800);
+ t1_tpi_write(adapter, OFFSET(0x232f), 0x00008800);
+ t1_tpi_write(adapter, OFFSET(0x230d), 0x00009c00);
+ t1_tpi_write(adapter, OFFSET(0x2304), 0x00000202); /* PL4IO Calendar Repetitions */
+
+ t1_tpi_write(adapter, OFFSET(0x3200), 0x00008080); /* EFLX Enable */
+ t1_tpi_write(adapter, OFFSET(0x3210), 0x00000000); /* EFLX Channel Deprovision */
+ t1_tpi_write(adapter, OFFSET(0x3203), 0x00000000); /* EFLX Low Limit */
+ t1_tpi_write(adapter, OFFSET(0x3204), 0x00000040); /* EFLX High Limit */
+ t1_tpi_write(adapter, OFFSET(0x3205), 0x000002cc); /* EFLX Almost Full */
+ t1_tpi_write(adapter, OFFSET(0x3206), 0x00000199); /* EFLX Almost Empty */
+ t1_tpi_write(adapter, OFFSET(0x3207), 0x00000240); /* EFLX Cut Through Threshold */
+ t1_tpi_write(adapter, OFFSET(0x3202), 0x00000000); /* EFLX Indirect Register Update */
+ t1_tpi_write(adapter, OFFSET(0x3210), 0x00000001); /* EFLX Channel Provision */
+ t1_tpi_write(adapter, OFFSET(0x3208), 0x0000ffff); /* EFLX Undocumented */
+ t1_tpi_write(adapter, OFFSET(0x320a), 0x0000ffff); /* EFLX Undocumented */
+ t1_tpi_write(adapter, OFFSET(0x320c), 0x0000ffff); /* EFLX enable overflow interrupt The other bit are undocumented */
+ t1_tpi_write(adapter, OFFSET(0x320e), 0x0000ffff); /* EFLX Undocumented */
+
+ t1_tpi_write(adapter, OFFSET(0x2200), 0x0000c000); /* IFLX Configuration - enable */
+ t1_tpi_write(adapter, OFFSET(0x2201), 0x00000000); /* IFLX Channel Deprovision */
+ t1_tpi_write(adapter, OFFSET(0x220e), 0x00000000); /* IFLX Low Limit */
+ t1_tpi_write(adapter, OFFSET(0x220f), 0x00000100); /* IFLX High Limit */
+ t1_tpi_write(adapter, OFFSET(0x2210), 0x00000c00); /* IFLX Almost Full Limit */
+ t1_tpi_write(adapter, OFFSET(0x2211), 0x00000599); /* IFLX Almost Empty Limit */
+ t1_tpi_write(adapter, OFFSET(0x220d), 0x00000000); /* IFLX Indirect Register Update */
+ t1_tpi_write(adapter, OFFSET(0x2201), 0x00000001); /* IFLX Channel Provision */
+ t1_tpi_write(adapter, OFFSET(0x2203), 0x0000ffff); /* IFLX Undocumented */
+ t1_tpi_write(adapter, OFFSET(0x2205), 0x0000ffff); /* IFLX Undocumented */
+ t1_tpi_write(adapter, OFFSET(0x2209), 0x0000ffff); /* IFLX Enable overflow interrupt. The other bit are undocumented */
+
+ t1_tpi_write(adapter, OFFSET(0x2241), 0xfffffffe); /* PL4MOS Undocumented */
+ t1_tpi_write(adapter, OFFSET(0x2242), 0x0000ffff); /* PL4MOS Undocumented */
+ t1_tpi_write(adapter, OFFSET(0x2243), 0x00000008); /* PL4MOS Starving Burst Size */
+ t1_tpi_write(adapter, OFFSET(0x2244), 0x00000008); /* PL4MOS Hungry Burst Size */
+ t1_tpi_write(adapter, OFFSET(0x2245), 0x00000008); /* PL4MOS Transfer Size */
+ t1_tpi_write(adapter, OFFSET(0x2240), 0x00000005); /* PL4MOS Disable */
+
+ t1_tpi_write(adapter, OFFSET(0x2280), 0x00002103); /* PL4ODP Training Repeat and SOP rule */
+ t1_tpi_write(adapter, OFFSET(0x2284), 0x00000000); /* PL4ODP MAX_T setting */
+
+ t1_tpi_write(adapter, OFFSET(0x3280), 0x00000087); /* PL4IDU Enable data forward, port state machine. Set ALLOW_NON_ZERO_OLB */
+ t1_tpi_write(adapter, OFFSET(0x3282), 0x0000001f); /* PL4IDU Enable Dip4 check error interrupts */
+
+ t1_tpi_write(adapter, OFFSET(0x3040), 0x0c32); /* # TXXG Config */
+ /* For T1 use timer based Mac flow control. */
+ t1_tpi_write(adapter, OFFSET(0x304d), 0x8000);
+ t1_tpi_write(adapter, OFFSET(0x2040), 0x059c); /* # RXXG Config */
+ t1_tpi_write(adapter, OFFSET(0x2049), 0x0001); /* # RXXG Cut Through */
+ t1_tpi_write(adapter, OFFSET(0x2070), 0x0000); /* # Disable promiscuous mode */
+
+ /* Setup Exact Match Filter 0 to allow broadcast packets.
+ */
+ t1_tpi_write(adapter, OFFSET(0x206e), 0x0000); /* # Disable Match Enable bit */
+ t1_tpi_write(adapter, OFFSET(0x204a), 0xffff); /* # low addr */
+ t1_tpi_write(adapter, OFFSET(0x204b), 0xffff); /* # mid addr */
+ t1_tpi_write(adapter, OFFSET(0x204c), 0xffff); /* # high addr */
+ t1_tpi_write(adapter, OFFSET(0x206e), 0x0009); /* # Enable Match Enable bit */
+
+ t1_tpi_write(adapter, OFFSET(0x0003), 0x0000); /* # NO SOP/ PAD_EN setup */
+ t1_tpi_write(adapter, OFFSET(0x0100), 0x0ff0); /* # RXEQB disabled */
+ t1_tpi_write(adapter, OFFSET(0x0101), 0x0f0f); /* # No Preemphasis */
+
+ return cmac;
+}
+
+static int pm3393_mac_reset(adapter_t * adapter)
+{
+ u32 val;
+ u32 x;
+ u32 is_pl4_reset_finished;
+ u32 is_pl4_outof_lock;
+ u32 is_xaui_mabc_pll_locked;
+ u32 successful_reset;
+ int i;
+
+ /* The following steps are required to properly reset
+ * the PM3393. This information is provided in the
+ * PM3393 datasheet (Issue 2: November 2002)
+ * section 13.1 -- Device Reset.
+ *
+ * The PM3393 has three types of components that are
+ * individually reset:
+ *
+ * DRESETB - Digital circuitry
+ * PL4_ARESETB - PL4 analog circuitry
+ * XAUI_ARESETB - XAUI bus analog circuitry
+ *
+ * Steps to reset PM3393 using RSTB pin:
+ *
+ * 1. Assert RSTB pin low ( write 0 )
+ * 2. Wait at least 1ms to initiate a complete initialization of device.
+ * 3. Wait until all external clocks and REFSEL are stable.
+ * 4. Wait minimum of 1ms. (after external clocks and REFEL are stable)
+ * 5. De-assert RSTB ( write 1 )
+ * 6. Wait until internal timers to expires after ~14ms.
+ * - Allows analog clock synthesizer(PL4CSU) to stabilize to
+ * selected reference frequency before allowing the digital
+ * portion of the device to operate.
+ * 7. Wait at least 200us for XAUI interface to stabilize.
+ * 8. Verify the PM3393 came out of reset successfully.
+ * Set successful reset flag if everything worked else try again
+ * a few more times.
+ */
+
+ successful_reset = 0;
+ for (i = 0; i < 3 && !successful_reset; i++) {
+ /* 1 */
+ t1_tpi_read(adapter, A_ELMER0_GPO, &val);
+ val &= ~1;
+ t1_tpi_write(adapter, A_ELMER0_GPO, val);
+
+ /* 2 */
+ msleep(1);
+
+ /* 3 */
+ msleep(1);
+
+ /* 4 */
+ msleep(2 /*1 extra ms for safety */ );
+
+ /* 5 */
+ val |= 1;
+ t1_tpi_write(adapter, A_ELMER0_GPO, val);
+
+ /* 6 */
+ msleep(15 /*1 extra ms for safety */ );
+
+ /* 7 */
+ msleep(1);
+
+ /* 8 */
+
+ /* Has PL4 analog block come out of reset correctly? */
+ t1_tpi_read(adapter, OFFSET(SUNI1x10GEXP_REG_DEVICE_STATUS), &val);
+ is_pl4_reset_finished = (val & SUNI1x10GEXP_BITMSK_TOP_EXPIRED);
+
+ /* TBD XXX SUNI1x10GEXP_BITMSK_TOP_PL4_IS_DOOL gets locked later in the init sequence
+ * figure out why? */
+
+ /* Have all PL4 block clocks locked? */
+ x = (SUNI1x10GEXP_BITMSK_TOP_PL4_ID_DOOL
+ /*| SUNI1x10GEXP_BITMSK_TOP_PL4_IS_DOOL */ |
+ SUNI1x10GEXP_BITMSK_TOP_PL4_ID_ROOL |
+ SUNI1x10GEXP_BITMSK_TOP_PL4_IS_ROOL |
+ SUNI1x10GEXP_BITMSK_TOP_PL4_OUT_ROOL);
+ is_pl4_outof_lock = (val & x);
+
+ /* ??? If this fails, might be able to software reset the XAUI part
+ * and try to recover... thus saving us from doing another HW reset */
+ /* Has the XAUI MABC PLL circuitry stablized? */
+ is_xaui_mabc_pll_locked =
+ (val & SUNI1x10GEXP_BITMSK_TOP_SXRA_EXPIRED);
+
+ successful_reset = (is_pl4_reset_finished && !is_pl4_outof_lock
+ && is_xaui_mabc_pll_locked);
+ }
+ return successful_reset ? 0 : 1;
+}
+
+struct gmac t1_pm3393_ops = {
+ STATS_TICK_SECS,
+ pm3393_mac_create,
+ pm3393_mac_reset
+};
diff --git a/drivers/net/chelsio/regs.h b/drivers/net/chelsio/regs.h
new file mode 100644
index 00000000000..b90e11f40d1
--- /dev/null
+++ b/drivers/net/chelsio/regs.h
@@ -0,0 +1,468 @@
+/*****************************************************************************
+ * *
+ * File: regs.h *
+ * $Revision: 1.8 $ *
+ * $Date: 2005/06/21 18:29:48 $ *
+ * Description: *
+ * part of the Chelsio 10Gb Ethernet Driver. *
+ * *
+ * This program is free software; you can redistribute it and/or modify *
+ * it under the terms of the GNU General Public License, version 2, as *
+ * published by the Free Software Foundation. *
+ * *
+ * You should have received a copy of the GNU General Public License along *
+ * with this program; if not, write to the Free Software Foundation, Inc., *
+ * 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. *
+ * *
+ * THIS SOFTWARE IS PROVIDED ``AS IS'' AND WITHOUT ANY EXPRESS OR IMPLIED *
+ * WARRANTIES, INCLUDING, WITHOUT LIMITATION, THE IMPLIED WARRANTIES OF *
+ * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. *
+ * *
+ * http://www.chelsio.com *
+ * *
+ * Copyright (c) 2003 - 2005 Chelsio Communications, Inc. *
+ * All rights reserved. *
+ * *
+ * Maintainers: maintainers@chelsio.com *
+ * *
+ * Authors: Dimitrios Michailidis <dm@chelsio.com> *
+ * Tina Yang <tainay@chelsio.com> *
+ * Felix Marti <felix@chelsio.com> *
+ * Scott Bardone <sbardone@chelsio.com> *
+ * Kurt Ottaway <kottaway@chelsio.com> *
+ * Frank DiMambro <frank@chelsio.com> *
+ * *
+ * History: *
+ * *
+ ****************************************************************************/
+
+#ifndef _CXGB_REGS_H_
+#define _CXGB_REGS_H_
+
+/* SGE registers */
+#define A_SG_CONTROL 0x0
+
+#define S_CMDQ0_ENABLE 0
+#define V_CMDQ0_ENABLE(x) ((x) << S_CMDQ0_ENABLE)
+#define F_CMDQ0_ENABLE V_CMDQ0_ENABLE(1U)
+
+#define S_CMDQ1_ENABLE 1
+#define V_CMDQ1_ENABLE(x) ((x) << S_CMDQ1_ENABLE)
+#define F_CMDQ1_ENABLE V_CMDQ1_ENABLE(1U)
+
+#define S_FL0_ENABLE 2
+#define V_FL0_ENABLE(x) ((x) << S_FL0_ENABLE)
+#define F_FL0_ENABLE V_FL0_ENABLE(1U)
+
+#define S_FL1_ENABLE 3
+#define V_FL1_ENABLE(x) ((x) << S_FL1_ENABLE)
+#define F_FL1_ENABLE V_FL1_ENABLE(1U)
+
+#define S_CPL_ENABLE 4
+#define V_CPL_ENABLE(x) ((x) << S_CPL_ENABLE)
+#define F_CPL_ENABLE V_CPL_ENABLE(1U)
+
+#define S_RESPONSE_QUEUE_ENABLE 5
+#define V_RESPONSE_QUEUE_ENABLE(x) ((x) << S_RESPONSE_QUEUE_ENABLE)
+#define F_RESPONSE_QUEUE_ENABLE V_RESPONSE_QUEUE_ENABLE(1U)
+
+#define S_CMDQ_PRIORITY 6
+#define M_CMDQ_PRIORITY 0x3
+#define V_CMDQ_PRIORITY(x) ((x) << S_CMDQ_PRIORITY)
+#define G_CMDQ_PRIORITY(x) (((x) >> S_CMDQ_PRIORITY) & M_CMDQ_PRIORITY)
+
+#define S_DISABLE_CMDQ1_GTS 9
+#define V_DISABLE_CMDQ1_GTS(x) ((x) << S_DISABLE_CMDQ1_GTS)
+#define F_DISABLE_CMDQ1_GTS V_DISABLE_CMDQ1_GTS(1U)
+
+#define S_DISABLE_FL0_GTS 10
+#define V_DISABLE_FL0_GTS(x) ((x) << S_DISABLE_FL0_GTS)
+#define F_DISABLE_FL0_GTS V_DISABLE_FL0_GTS(1U)
+
+#define S_DISABLE_FL1_GTS 11
+#define V_DISABLE_FL1_GTS(x) ((x) << S_DISABLE_FL1_GTS)
+#define F_DISABLE_FL1_GTS V_DISABLE_FL1_GTS(1U)
+
+#define S_ENABLE_BIG_ENDIAN 12
+#define V_ENABLE_BIG_ENDIAN(x) ((x) << S_ENABLE_BIG_ENDIAN)
+#define F_ENABLE_BIG_ENDIAN V_ENABLE_BIG_ENDIAN(1U)
+
+#define S_ISCSI_COALESCE 14
+#define V_ISCSI_COALESCE(x) ((x) << S_ISCSI_COALESCE)
+#define F_ISCSI_COALESCE V_ISCSI_COALESCE(1U)
+
+#define S_RX_PKT_OFFSET 15
+#define V_RX_PKT_OFFSET(x) ((x) << S_RX_PKT_OFFSET)
+
+#define S_VLAN_XTRACT 18
+#define V_VLAN_XTRACT(x) ((x) << S_VLAN_XTRACT)
+#define F_VLAN_XTRACT V_VLAN_XTRACT(1U)
+
+#define A_SG_DOORBELL 0x4
+#define A_SG_CMD0BASELWR 0x8
+#define A_SG_CMD0BASEUPR 0xc
+#define A_SG_CMD1BASELWR 0x10
+#define A_SG_CMD1BASEUPR 0x14
+#define A_SG_FL0BASELWR 0x18
+#define A_SG_FL0BASEUPR 0x1c
+#define A_SG_FL1BASELWR 0x20
+#define A_SG_FL1BASEUPR 0x24
+#define A_SG_CMD0SIZE 0x28
+#define A_SG_FL0SIZE 0x2c
+#define A_SG_RSPSIZE 0x30
+#define A_SG_RSPBASELWR 0x34
+#define A_SG_RSPBASEUPR 0x38
+#define A_SG_FLTHRESHOLD 0x3c
+#define A_SG_RSPQUEUECREDIT 0x40
+#define A_SG_SLEEPING 0x48
+#define A_SG_INTRTIMER 0x4c
+#define A_SG_CMD1SIZE 0xb0
+#define A_SG_FL1SIZE 0xb4
+#define A_SG_INT_ENABLE 0xb8
+
+#define S_RESPQ_EXHAUSTED 0
+#define V_RESPQ_EXHAUSTED(x) ((x) << S_RESPQ_EXHAUSTED)
+#define F_RESPQ_EXHAUSTED V_RESPQ_EXHAUSTED(1U)
+
+#define S_RESPQ_OVERFLOW 1
+#define V_RESPQ_OVERFLOW(x) ((x) << S_RESPQ_OVERFLOW)
+#define F_RESPQ_OVERFLOW V_RESPQ_OVERFLOW(1U)
+
+#define S_FL_EXHAUSTED 2
+#define V_FL_EXHAUSTED(x) ((x) << S_FL_EXHAUSTED)
+#define F_FL_EXHAUSTED V_FL_EXHAUSTED(1U)
+
+#define S_PACKET_TOO_BIG 3
+#define V_PACKET_TOO_BIG(x) ((x) << S_PACKET_TOO_BIG)
+#define F_PACKET_TOO_BIG V_PACKET_TOO_BIG(1U)
+
+#define S_PACKET_MISMATCH 4
+#define V_PACKET_MISMATCH(x) ((x) << S_PACKET_MISMATCH)
+#define F_PACKET_MISMATCH V_PACKET_MISMATCH(1U)
+
+#define A_SG_INT_CAUSE 0xbc
+#define A_SG_RESPACCUTIMER 0xc0
+
+/* MC3 registers */
+
+#define S_READY 1
+#define V_READY(x) ((x) << S_READY)
+#define F_READY V_READY(1U)
+
+/* MC4 registers */
+
+#define A_MC4_CFG 0x180
+#define S_MC4_SLOW 25
+#define V_MC4_SLOW(x) ((x) << S_MC4_SLOW)
+#define F_MC4_SLOW V_MC4_SLOW(1U)
+
+/* TPI registers */
+
+#define A_TPI_ADDR 0x280
+#define A_TPI_WR_DATA 0x284
+#define A_TPI_RD_DATA 0x288
+#define A_TPI_CSR 0x28c
+
+#define S_TPIWR 0
+#define V_TPIWR(x) ((x) << S_TPIWR)
+#define F_TPIWR V_TPIWR(1U)
+
+#define S_TPIRDY 1
+#define V_TPIRDY(x) ((x) << S_TPIRDY)
+#define F_TPIRDY V_TPIRDY(1U)
+
+#define A_TPI_PAR 0x29c
+
+#define S_TPIPAR 0
+#define M_TPIPAR 0x7f
+#define V_TPIPAR(x) ((x) << S_TPIPAR)
+#define G_TPIPAR(x) (((x) >> S_TPIPAR) & M_TPIPAR)
+
+/* TP registers */
+
+#define A_TP_IN_CONFIG 0x300
+
+#define S_TP_IN_CSPI_CPL 3
+#define V_TP_IN_CSPI_CPL(x) ((x) << S_TP_IN_CSPI_CPL)
+#define F_TP_IN_CSPI_CPL V_TP_IN_CSPI_CPL(1U)
+
+#define S_TP_IN_CSPI_CHECK_IP_CSUM 5
+#define V_TP_IN_CSPI_CHECK_IP_CSUM(x) ((x) << S_TP_IN_CSPI_CHECK_IP_CSUM)
+#define F_TP_IN_CSPI_CHECK_IP_CSUM V_TP_IN_CSPI_CHECK_IP_CSUM(1U)
+
+#define S_TP_IN_CSPI_CHECK_TCP_CSUM 6
+#define V_TP_IN_CSPI_CHECK_TCP_CSUM(x) ((x) << S_TP_IN_CSPI_CHECK_TCP_CSUM)
+#define F_TP_IN_CSPI_CHECK_TCP_CSUM V_TP_IN_CSPI_CHECK_TCP_CSUM(1U)
+
+#define S_TP_IN_ESPI_ETHERNET 8
+#define V_TP_IN_ESPI_ETHERNET(x) ((x) << S_TP_IN_ESPI_ETHERNET)
+#define F_TP_IN_ESPI_ETHERNET V_TP_IN_ESPI_ETHERNET(1U)
+
+#define S_TP_IN_ESPI_CHECK_IP_CSUM 12
+#define V_TP_IN_ESPI_CHECK_IP_CSUM(x) ((x) << S_TP_IN_ESPI_CHECK_IP_CSUM)
+#define F_TP_IN_ESPI_CHECK_IP_CSUM V_TP_IN_ESPI_CHECK_IP_CSUM(1U)
+
+#define S_TP_IN_ESPI_CHECK_TCP_CSUM 13
+#define V_TP_IN_ESPI_CHECK_TCP_CSUM(x) ((x) << S_TP_IN_ESPI_CHECK_TCP_CSUM)
+#define F_TP_IN_ESPI_CHECK_TCP_CSUM V_TP_IN_ESPI_CHECK_TCP_CSUM(1U)
+
+#define S_OFFLOAD_DISABLE 14
+#define V_OFFLOAD_DISABLE(x) ((x) << S_OFFLOAD_DISABLE)
+#define F_OFFLOAD_DISABLE V_OFFLOAD_DISABLE(1U)
+
+#define A_TP_OUT_CONFIG 0x304
+
+#define S_TP_OUT_CSPI_CPL 2
+#define V_TP_OUT_CSPI_CPL(x) ((x) << S_TP_OUT_CSPI_CPL)
+#define F_TP_OUT_CSPI_CPL V_TP_OUT_CSPI_CPL(1U)
+
+#define S_TP_OUT_ESPI_ETHERNET 6
+#define V_TP_OUT_ESPI_ETHERNET(x) ((x) << S_TP_OUT_ESPI_ETHERNET)
+#define F_TP_OUT_ESPI_ETHERNET V_TP_OUT_ESPI_ETHERNET(1U)
+
+#define S_TP_OUT_ESPI_GENERATE_IP_CSUM 10
+#define V_TP_OUT_ESPI_GENERATE_IP_CSUM(x) ((x) << S_TP_OUT_ESPI_GENERATE_IP_CSUM)
+#define F_TP_OUT_ESPI_GENERATE_IP_CSUM V_TP_OUT_ESPI_GENERATE_IP_CSUM(1U)
+
+#define S_TP_OUT_ESPI_GENERATE_TCP_CSUM 11
+#define V_TP_OUT_ESPI_GENERATE_TCP_CSUM(x) ((x) << S_TP_OUT_ESPI_GENERATE_TCP_CSUM)
+#define F_TP_OUT_ESPI_GENERATE_TCP_CSUM V_TP_OUT_ESPI_GENERATE_TCP_CSUM(1U)
+
+#define A_TP_GLOBAL_CONFIG 0x308
+
+#define S_IP_TTL 0
+#define M_IP_TTL 0xff
+#define V_IP_TTL(x) ((x) << S_IP_TTL)
+
+#define S_TCP_CSUM 11
+#define V_TCP_CSUM(x) ((x) << S_TCP_CSUM)
+#define F_TCP_CSUM V_TCP_CSUM(1U)
+
+#define S_UDP_CSUM 12
+#define V_UDP_CSUM(x) ((x) << S_UDP_CSUM)
+#define F_UDP_CSUM V_UDP_CSUM(1U)
+
+#define S_IP_CSUM 13
+#define V_IP_CSUM(x) ((x) << S_IP_CSUM)
+#define F_IP_CSUM V_IP_CSUM(1U)
+
+#define S_PATH_MTU 15
+#define V_PATH_MTU(x) ((x) << S_PATH_MTU)
+#define F_PATH_MTU V_PATH_MTU(1U)
+
+#define S_5TUPLE_LOOKUP 17
+#define V_5TUPLE_LOOKUP(x) ((x) << S_5TUPLE_LOOKUP)
+
+#define S_SYN_COOKIE_PARAMETER 26
+#define V_SYN_COOKIE_PARAMETER(x) ((x) << S_SYN_COOKIE_PARAMETER)
+
+#define A_TP_PC_CONFIG 0x348
+#define S_DIS_TX_FILL_WIN_PUSH 12
+#define V_DIS_TX_FILL_WIN_PUSH(x) ((x) << S_DIS_TX_FILL_WIN_PUSH)
+#define F_DIS_TX_FILL_WIN_PUSH V_DIS_TX_FILL_WIN_PUSH(1U)
+
+#define S_TP_PC_REV 30
+#define M_TP_PC_REV 0x3
+#define G_TP_PC_REV(x) (((x) >> S_TP_PC_REV) & M_TP_PC_REV)
+#define A_TP_RESET 0x44c
+#define S_TP_RESET 0
+#define V_TP_RESET(x) ((x) << S_TP_RESET)
+#define F_TP_RESET V_TP_RESET(1U)
+
+#define A_TP_INT_ENABLE 0x470
+#define A_TP_INT_CAUSE 0x474
+#define A_TP_TX_DROP_CONFIG 0x4b8
+
+#define S_ENABLE_TX_DROP 31
+#define V_ENABLE_TX_DROP(x) ((x) << S_ENABLE_TX_DROP)
+#define F_ENABLE_TX_DROP V_ENABLE_TX_DROP(1U)
+
+#define S_ENABLE_TX_ERROR 30
+#define V_ENABLE_TX_ERROR(x) ((x) << S_ENABLE_TX_ERROR)
+#define F_ENABLE_TX_ERROR V_ENABLE_TX_ERROR(1U)
+
+#define S_DROP_TICKS_CNT 4
+#define V_DROP_TICKS_CNT(x) ((x) << S_DROP_TICKS_CNT)
+
+#define S_NUM_PKTS_DROPPED 0
+#define V_NUM_PKTS_DROPPED(x) ((x) << S_NUM_PKTS_DROPPED)
+
+/* CSPI registers */
+
+#define S_DIP4ERR 0
+#define V_DIP4ERR(x) ((x) << S_DIP4ERR)
+#define F_DIP4ERR V_DIP4ERR(1U)
+
+#define S_RXDROP 1
+#define V_RXDROP(x) ((x) << S_RXDROP)
+#define F_RXDROP V_RXDROP(1U)
+
+#define S_TXDROP 2
+#define V_TXDROP(x) ((x) << S_TXDROP)
+#define F_TXDROP V_TXDROP(1U)
+
+#define S_RXOVERFLOW 3
+#define V_RXOVERFLOW(x) ((x) << S_RXOVERFLOW)
+#define F_RXOVERFLOW V_RXOVERFLOW(1U)
+
+#define S_RAMPARITYERR 4
+#define V_RAMPARITYERR(x) ((x) << S_RAMPARITYERR)
+#define F_RAMPARITYERR V_RAMPARITYERR(1U)
+
+/* ESPI registers */
+
+#define A_ESPI_SCH_TOKEN0 0x880
+#define A_ESPI_SCH_TOKEN1 0x884
+#define A_ESPI_SCH_TOKEN2 0x888
+#define A_ESPI_SCH_TOKEN3 0x88c
+#define A_ESPI_RX_FIFO_ALMOST_EMPTY_WATERMARK 0x890
+#define A_ESPI_RX_FIFO_ALMOST_FULL_WATERMARK 0x894
+#define A_ESPI_CALENDAR_LENGTH 0x898
+#define A_PORT_CONFIG 0x89c
+
+#define S_RX_NPORTS 0
+#define V_RX_NPORTS(x) ((x) << S_RX_NPORTS)
+
+#define S_TX_NPORTS 8
+#define V_TX_NPORTS(x) ((x) << S_TX_NPORTS)
+
+#define A_ESPI_FIFO_STATUS_ENABLE 0x8a0
+
+#define S_RXSTATUSENABLE 0
+#define V_RXSTATUSENABLE(x) ((x) << S_RXSTATUSENABLE)
+#define F_RXSTATUSENABLE V_RXSTATUSENABLE(1U)
+
+#define S_INTEL1010MODE 4
+#define V_INTEL1010MODE(x) ((x) << S_INTEL1010MODE)
+#define F_INTEL1010MODE V_INTEL1010MODE(1U)
+
+#define A_ESPI_MAXBURST1_MAXBURST2 0x8a8
+#define A_ESPI_TRAIN 0x8ac
+#define A_ESPI_INTR_STATUS 0x8c8
+
+#define S_DIP2PARITYERR 5
+#define V_DIP2PARITYERR(x) ((x) << S_DIP2PARITYERR)
+#define F_DIP2PARITYERR V_DIP2PARITYERR(1U)
+
+#define A_ESPI_INTR_ENABLE 0x8cc
+#define A_RX_DROP_THRESHOLD 0x8d0
+#define A_ESPI_RX_RESET 0x8ec
+#define A_ESPI_MISC_CONTROL 0x8f0
+
+#define S_OUT_OF_SYNC_COUNT 0
+#define V_OUT_OF_SYNC_COUNT(x) ((x) << S_OUT_OF_SYNC_COUNT)
+
+#define S_DIP2_PARITY_ERR_THRES 5
+#define V_DIP2_PARITY_ERR_THRES(x) ((x) << S_DIP2_PARITY_ERR_THRES)
+
+#define S_DIP4_THRES 9
+#define V_DIP4_THRES(x) ((x) << S_DIP4_THRES)
+
+#define S_MONITORED_PORT_NUM 25
+#define V_MONITORED_PORT_NUM(x) ((x) << S_MONITORED_PORT_NUM)
+
+#define S_MONITORED_DIRECTION 27
+#define V_MONITORED_DIRECTION(x) ((x) << S_MONITORED_DIRECTION)
+#define F_MONITORED_DIRECTION V_MONITORED_DIRECTION(1U)
+
+#define S_MONITORED_INTERFACE 28
+#define V_MONITORED_INTERFACE(x) ((x) << S_MONITORED_INTERFACE)
+#define F_MONITORED_INTERFACE V_MONITORED_INTERFACE(1U)
+
+#define A_ESPI_DIP2_ERR_COUNT 0x8f4
+#define A_ESPI_CMD_ADDR 0x8f8
+
+#define S_WRITE_DATA 0
+#define V_WRITE_DATA(x) ((x) << S_WRITE_DATA)
+
+#define S_REGISTER_OFFSET 8
+#define V_REGISTER_OFFSET(x) ((x) << S_REGISTER_OFFSET)
+
+#define S_CHANNEL_ADDR 12
+#define V_CHANNEL_ADDR(x) ((x) << S_CHANNEL_ADDR)
+
+#define S_MODULE_ADDR 16
+#define V_MODULE_ADDR(x) ((x) << S_MODULE_ADDR)
+
+#define S_BUNDLE_ADDR 20
+#define V_BUNDLE_ADDR(x) ((x) << S_BUNDLE_ADDR)
+
+#define S_SPI4_COMMAND 24
+#define V_SPI4_COMMAND(x) ((x) << S_SPI4_COMMAND)
+
+#define A_ESPI_GOSTAT 0x8fc
+#define S_ESPI_CMD_BUSY 8
+#define V_ESPI_CMD_BUSY(x) ((x) << S_ESPI_CMD_BUSY)
+#define F_ESPI_CMD_BUSY V_ESPI_CMD_BUSY(1U)
+
+/* PL registers */
+
+#define A_PL_ENABLE 0xa00
+
+#define S_PL_INTR_SGE_ERR 0
+#define V_PL_INTR_SGE_ERR(x) ((x) << S_PL_INTR_SGE_ERR)
+#define F_PL_INTR_SGE_ERR V_PL_INTR_SGE_ERR(1U)
+
+#define S_PL_INTR_SGE_DATA 1
+#define V_PL_INTR_SGE_DATA(x) ((x) << S_PL_INTR_SGE_DATA)
+#define F_PL_INTR_SGE_DATA V_PL_INTR_SGE_DATA(1U)
+
+#define S_PL_INTR_TP 6
+#define V_PL_INTR_TP(x) ((x) << S_PL_INTR_TP)
+#define F_PL_INTR_TP V_PL_INTR_TP(1U)
+
+#define S_PL_INTR_ESPI 8
+#define V_PL_INTR_ESPI(x) ((x) << S_PL_INTR_ESPI)
+#define F_PL_INTR_ESPI V_PL_INTR_ESPI(1U)
+
+#define S_PL_INTR_PCIX 10
+#define V_PL_INTR_PCIX(x) ((x) << S_PL_INTR_PCIX)
+#define F_PL_INTR_PCIX V_PL_INTR_PCIX(1U)
+
+#define S_PL_INTR_EXT 11
+#define V_PL_INTR_EXT(x) ((x) << S_PL_INTR_EXT)
+#define F_PL_INTR_EXT V_PL_INTR_EXT(1U)
+
+#define A_PL_CAUSE 0xa04
+
+/* MC5 registers */
+
+#define A_MC5_CONFIG 0xc04
+
+#define S_TCAM_RESET 1
+#define V_TCAM_RESET(x) ((x) << S_TCAM_RESET)
+#define F_TCAM_RESET V_TCAM_RESET(1U)
+
+#define S_M_BUS_ENABLE 5
+#define V_M_BUS_ENABLE(x) ((x) << S_M_BUS_ENABLE)
+#define F_M_BUS_ENABLE V_M_BUS_ENABLE(1U)
+
+/* PCICFG registers */
+
+#define A_PCICFG_PM_CSR 0x44
+#define A_PCICFG_VPD_ADDR 0x4a
+
+#define S_VPD_OP_FLAG 15
+#define V_VPD_OP_FLAG(x) ((x) << S_VPD_OP_FLAG)
+#define F_VPD_OP_FLAG V_VPD_OP_FLAG(1U)
+
+#define A_PCICFG_VPD_DATA 0x4c
+
+#define A_PCICFG_INTR_ENABLE 0xf4
+#define A_PCICFG_INTR_CAUSE 0xf8
+
+#define A_PCICFG_MODE 0xfc
+
+#define S_PCI_MODE_64BIT 0
+#define V_PCI_MODE_64BIT(x) ((x) << S_PCI_MODE_64BIT)
+#define F_PCI_MODE_64BIT V_PCI_MODE_64BIT(1U)
+
+#define S_PCI_MODE_PCIX 5
+#define V_PCI_MODE_PCIX(x) ((x) << S_PCI_MODE_PCIX)
+#define F_PCI_MODE_PCIX V_PCI_MODE_PCIX(1U)
+
+#define S_PCI_MODE_CLK 6
+#define M_PCI_MODE_CLK 0x3
+#define G_PCI_MODE_CLK(x) (((x) >> S_PCI_MODE_CLK) & M_PCI_MODE_CLK)
+
+#endif /* _CXGB_REGS_H_ */
diff --git a/drivers/net/chelsio/sge.c b/drivers/net/chelsio/sge.c
new file mode 100644
index 00000000000..53b41d99b00
--- /dev/null
+++ b/drivers/net/chelsio/sge.c
@@ -0,0 +1,1684 @@
+/*****************************************************************************
+ * *
+ * File: sge.c *
+ * $Revision: 1.26 $ *
+ * $Date: 2005/06/21 18:29:48 $ *
+ * Description: *
+ * DMA engine. *
+ * part of the Chelsio 10Gb Ethernet Driver. *
+ * *
+ * This program is free software; you can redistribute it and/or modify *
+ * it under the terms of the GNU General Public License, version 2, as *
+ * published by the Free Software Foundation. *
+ * *
+ * You should have received a copy of the GNU General Public License along *
+ * with this program; if not, write to the Free Software Foundation, Inc., *
+ * 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. *
+ * *
+ * THIS SOFTWARE IS PROVIDED ``AS IS'' AND WITHOUT ANY EXPRESS OR IMPLIED *
+ * WARRANTIES, INCLUDING, WITHOUT LIMITATION, THE IMPLIED WARRANTIES OF *
+ * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. *
+ * *
+ * http://www.chelsio.com *
+ * *
+ * Copyright (c) 2003 - 2005 Chelsio Communications, Inc. *
+ * All rights reserved. *
+ * *
+ * Maintainers: maintainers@chelsio.com *
+ * *
+ * Authors: Dimitrios Michailidis <dm@chelsio.com> *
+ * Tina Yang <tainay@chelsio.com> *
+ * Felix Marti <felix@chelsio.com> *
+ * Scott Bardone <sbardone@chelsio.com> *
+ * Kurt Ottaway <kottaway@chelsio.com> *
+ * Frank DiMambro <frank@chelsio.com> *
+ * *
+ * History: *
+ * *
+ ****************************************************************************/
+
+#include "common.h"
+
+#include <linux/config.h>
+#include <linux/types.h>
+#include <linux/errno.h>
+#include <linux/pci.h>
+#include <linux/netdevice.h>
+#include <linux/etherdevice.h>
+#include <linux/if_vlan.h>
+#include <linux/skbuff.h>
+#include <linux/init.h>
+#include <linux/mm.h>
+#include <linux/ip.h>
+#include <linux/in.h>
+#include <linux/if_arp.h>
+
+#include "cpl5_cmd.h"
+#include "sge.h"
+#include "regs.h"
+#include "espi.h"
+
+
+#ifdef NETIF_F_TSO
+#include <linux/tcp.h>
+#endif
+
+#define SGE_CMDQ_N 2
+#define SGE_FREELQ_N 2
+#define SGE_CMDQ0_E_N 1024
+#define SGE_CMDQ1_E_N 128
+#define SGE_FREEL_SIZE 4096
+#define SGE_JUMBO_FREEL_SIZE 512
+#define SGE_FREEL_REFILL_THRESH 16
+#define SGE_RESPQ_E_N 1024
+#define SGE_INTRTIMER_NRES 1000
+#define SGE_RX_COPY_THRES 256
+#define SGE_RX_SM_BUF_SIZE 1536
+
+# define SGE_RX_DROP_THRES 2
+
+#define SGE_RESPQ_REPLENISH_THRES (SGE_RESPQ_E_N / 4)
+
+/*
+ * Period of the TX buffer reclaim timer. This timer does not need to run
+ * frequently as TX buffers are usually reclaimed by new TX packets.
+ */
+#define TX_RECLAIM_PERIOD (HZ / 4)
+
+#ifndef NET_IP_ALIGN
+# define NET_IP_ALIGN 2
+#endif
+
+#define M_CMD_LEN 0x7fffffff
+#define V_CMD_LEN(v) (v)
+#define G_CMD_LEN(v) ((v) & M_CMD_LEN)
+#define V_CMD_GEN1(v) ((v) << 31)
+#define V_CMD_GEN2(v) (v)
+#define F_CMD_DATAVALID (1 << 1)
+#define F_CMD_SOP (1 << 2)
+#define V_CMD_EOP(v) ((v) << 3)
+
+/*
+ * Command queue, receive buffer list, and response queue descriptors.
+ */
+#if defined(__BIG_ENDIAN_BITFIELD)
+struct cmdQ_e {
+ u32 addr_lo;
+ u32 len_gen;
+ u32 flags;
+ u32 addr_hi;
+};
+
+struct freelQ_e {
+ u32 addr_lo;
+ u32 len_gen;
+ u32 gen2;
+ u32 addr_hi;
+};
+
+struct respQ_e {
+ u32 Qsleeping : 4;
+ u32 Cmdq1CreditReturn : 5;
+ u32 Cmdq1DmaComplete : 5;
+ u32 Cmdq0CreditReturn : 5;
+ u32 Cmdq0DmaComplete : 5;
+ u32 FreelistQid : 2;
+ u32 CreditValid : 1;
+ u32 DataValid : 1;
+ u32 Offload : 1;
+ u32 Eop : 1;
+ u32 Sop : 1;
+ u32 GenerationBit : 1;
+ u32 BufferLength;
+};
+#elif defined(__LITTLE_ENDIAN_BITFIELD)
+struct cmdQ_e {
+ u32 len_gen;
+ u32 addr_lo;
+ u32 addr_hi;
+ u32 flags;
+};
+
+struct freelQ_e {
+ u32 len_gen;
+ u32 addr_lo;
+ u32 addr_hi;
+ u32 gen2;
+};
+
+struct respQ_e {
+ u32 BufferLength;
+ u32 GenerationBit : 1;
+ u32 Sop : 1;
+ u32 Eop : 1;
+ u32 Offload : 1;
+ u32 DataValid : 1;
+ u32 CreditValid : 1;
+ u32 FreelistQid : 2;
+ u32 Cmdq0DmaComplete : 5;
+ u32 Cmdq0CreditReturn : 5;
+ u32 Cmdq1DmaComplete : 5;
+ u32 Cmdq1CreditReturn : 5;
+ u32 Qsleeping : 4;
+} ;
+#endif
+
+/*
+ * SW Context Command and Freelist Queue Descriptors
+ */
+struct cmdQ_ce {
+ struct sk_buff *skb;
+ DECLARE_PCI_UNMAP_ADDR(dma_addr);
+ DECLARE_PCI_UNMAP_LEN(dma_len);
+};
+
+struct freelQ_ce {
+ struct sk_buff *skb;
+ DECLARE_PCI_UNMAP_ADDR(dma_addr);
+ DECLARE_PCI_UNMAP_LEN(dma_len);
+};
+
+/*
+ * SW command, freelist and response rings
+ */
+struct cmdQ {
+ unsigned long status; /* HW DMA fetch status */
+ unsigned int in_use; /* # of in-use command descriptors */
+ unsigned int size; /* # of descriptors */
+ unsigned int processed; /* total # of descs HW has processed */
+ unsigned int cleaned; /* total # of descs SW has reclaimed */
+ unsigned int stop_thres; /* SW TX queue suspend threshold */
+ u16 pidx; /* producer index (SW) */
+ u16 cidx; /* consumer index (HW) */
+ u8 genbit; /* current generation (=valid) bit */
+ u8 sop; /* is next entry start of packet? */
+ struct cmdQ_e *entries; /* HW command descriptor Q */
+ struct cmdQ_ce *centries; /* SW command context descriptor Q */
+ spinlock_t lock; /* Lock to protect cmdQ enqueuing */
+ dma_addr_t dma_addr; /* DMA addr HW command descriptor Q */
+};
+
+struct freelQ {
+ unsigned int credits; /* # of available RX buffers */
+ unsigned int size; /* free list capacity */
+ u16 pidx; /* producer index (SW) */
+ u16 cidx; /* consumer index (HW) */
+ u16 rx_buffer_size; /* Buffer size on this free list */
+ u16 dma_offset; /* DMA offset to align IP headers */
+ u16 recycleq_idx; /* skb recycle q to use */
+ u8 genbit; /* current generation (=valid) bit */
+ struct freelQ_e *entries; /* HW freelist descriptor Q */
+ struct freelQ_ce *centries; /* SW freelist context descriptor Q */
+ dma_addr_t dma_addr; /* DMA addr HW freelist descriptor Q */
+};
+
+struct respQ {
+ unsigned int credits; /* credits to be returned to SGE */
+ unsigned int size; /* # of response Q descriptors */
+ u16 cidx; /* consumer index (SW) */
+ u8 genbit; /* current generation(=valid) bit */
+ struct respQ_e *entries; /* HW response descriptor Q */
+ dma_addr_t dma_addr; /* DMA addr HW response descriptor Q */
+};
+
+/* Bit flags for cmdQ.status */
+enum {
+ CMDQ_STAT_RUNNING = 1, /* fetch engine is running */
+ CMDQ_STAT_LAST_PKT_DB = 2 /* last packet rung the doorbell */
+};
+
+/*
+ * Main SGE data structure
+ *
+ * Interrupts are handled by a single CPU and it is likely that on a MP system
+ * the application is migrated to another CPU. In that scenario, we try to
+ * seperate the RX(in irq context) and TX state in order to decrease memory
+ * contention.
+ */
+struct sge {
+ struct adapter *adapter; /* adapter backpointer */
+ struct net_device *netdev; /* netdevice backpointer */
+ struct freelQ freelQ[SGE_FREELQ_N]; /* buffer free lists */
+ struct respQ respQ; /* response Q */
+ unsigned long stopped_tx_queues; /* bitmap of suspended Tx queues */
+ unsigned int rx_pkt_pad; /* RX padding for L2 packets */
+ unsigned int jumbo_fl; /* jumbo freelist Q index */
+ unsigned int intrtimer_nres; /* no-resource interrupt timer */
+ unsigned int fixed_intrtimer;/* non-adaptive interrupt timer */
+ struct timer_list tx_reclaim_timer; /* reclaims TX buffers */
+ struct timer_list espibug_timer;
+ unsigned int espibug_timeout;
+ struct sk_buff *espibug_skb;
+ u32 sge_control; /* shadow value of sge control reg */
+ struct sge_intr_counts stats;
+ struct sge_port_stats port_stats[MAX_NPORTS];
+ struct cmdQ cmdQ[SGE_CMDQ_N] ____cacheline_aligned_in_smp;
+};
+
+/*
+ * PIO to indicate that memory mapped Q contains valid descriptor(s).
+ */
+static inline void doorbell_pio(struct adapter *adapter, u32 val)
+{
+ wmb();
+ writel(val, adapter->regs + A_SG_DOORBELL);
+}
+
+/*
+ * Frees all RX buffers on the freelist Q. The caller must make sure that
+ * the SGE is turned off before calling this function.
+ */
+static void free_freelQ_buffers(struct pci_dev *pdev, struct freelQ *q)
+{
+ unsigned int cidx = q->cidx;
+
+ while (q->credits--) {
+ struct freelQ_ce *ce = &q->centries[cidx];
+
+ pci_unmap_single(pdev, pci_unmap_addr(ce, dma_addr),
+ pci_unmap_len(ce, dma_len),
+ PCI_DMA_FROMDEVICE);
+ dev_kfree_skb(ce->skb);
+ ce->skb = NULL;
+ if (++cidx == q->size)
+ cidx = 0;
+ }
+}
+
+/*
+ * Free RX free list and response queue resources.
+ */
+static void free_rx_resources(struct sge *sge)
+{
+ struct pci_dev *pdev = sge->adapter->pdev;
+ unsigned int size, i;
+
+ if (sge->respQ.entries) {
+ size = sizeof(struct respQ_e) * sge->respQ.size;
+ pci_free_consistent(pdev, size, sge->respQ.entries,
+ sge->respQ.dma_addr);
+ }
+
+ for (i = 0; i < SGE_FREELQ_N; i++) {
+ struct freelQ *q = &sge->freelQ[i];
+
+ if (q->centries) {
+ free_freelQ_buffers(pdev, q);
+ kfree(q->centries);
+ }
+ if (q->entries) {
+ size = sizeof(struct freelQ_e) * q->size;
+ pci_free_consistent(pdev, size, q->entries,
+ q->dma_addr);
+ }
+ }
+}
+
+/*
+ * Allocates basic RX resources, consisting of memory mapped freelist Qs and a
+ * response queue.
+ */
+static int alloc_rx_resources(struct sge *sge, struct sge_params *p)
+{
+ struct pci_dev *pdev = sge->adapter->pdev;
+ unsigned int size, i;
+
+ for (i = 0; i < SGE_FREELQ_N; i++) {
+ struct freelQ *q = &sge->freelQ[i];
+
+ q->genbit = 1;
+ q->size = p->freelQ_size[i];
+ q->dma_offset = sge->rx_pkt_pad ? 0 : NET_IP_ALIGN;
+ size = sizeof(struct freelQ_e) * q->size;
+ q->entries = (struct freelQ_e *)
+ pci_alloc_consistent(pdev, size, &q->dma_addr);
+ if (!q->entries)
+ goto err_no_mem;
+ memset(q->entries, 0, size);
+ size = sizeof(struct freelQ_ce) * q->size;
+ q->centries = kmalloc(size, GFP_KERNEL);
+ if (!q->centries)
+ goto err_no_mem;
+ memset(q->centries, 0, size);
+ }
+
+ /*
+ * Calculate the buffer sizes for the two free lists. FL0 accommodates
+ * regular sized Ethernet frames, FL1 is sized not to exceed 16K,
+ * including all the sk_buff overhead.
+ *
+ * Note: For T2 FL0 and FL1 are reversed.
+ */
+ sge->freelQ[!sge->jumbo_fl].rx_buffer_size = SGE_RX_SM_BUF_SIZE +
+ sizeof(struct cpl_rx_data) +
+ sge->freelQ[!sge->jumbo_fl].dma_offset;
+ sge->freelQ[sge->jumbo_fl].rx_buffer_size = (16 * 1024) -
+ SKB_DATA_ALIGN(sizeof(struct skb_shared_info));
+
+ /*
+ * Setup which skb recycle Q should be used when recycling buffers from
+ * each free list.
+ */
+ sge->freelQ[!sge->jumbo_fl].recycleq_idx = 0;
+ sge->freelQ[sge->jumbo_fl].recycleq_idx = 1;
+
+ sge->respQ.genbit = 1;
+ sge->respQ.size = SGE_RESPQ_E_N;
+ sge->respQ.credits = 0;
+ size = sizeof(struct respQ_e) * sge->respQ.size;
+ sge->respQ.entries = (struct respQ_e *)
+ pci_alloc_consistent(pdev, size, &sge->respQ.dma_addr);
+ if (!sge->respQ.entries)
+ goto err_no_mem;
+ memset(sge->respQ.entries, 0, size);
+ return 0;
+
+err_no_mem:
+ free_rx_resources(sge);
+ return -ENOMEM;
+}
+
+/*
+ * Reclaims n TX descriptors and frees the buffers associated with them.
+ */
+static void free_cmdQ_buffers(struct sge *sge, struct cmdQ *q, unsigned int n)
+{
+ struct cmdQ_ce *ce;
+ struct pci_dev *pdev = sge->adapter->pdev;
+ unsigned int cidx = q->cidx;
+
+ q->in_use -= n;
+ ce = &q->centries[cidx];
+ while (n--) {
+ if (q->sop)
+ pci_unmap_single(pdev, pci_unmap_addr(ce, dma_addr),
+ pci_unmap_len(ce, dma_len),
+ PCI_DMA_TODEVICE);
+ else
+ pci_unmap_page(pdev, pci_unmap_addr(ce, dma_addr),
+ pci_unmap_len(ce, dma_len),
+ PCI_DMA_TODEVICE);
+ q->sop = 0;
+ if (ce->skb) {
+ dev_kfree_skb(ce->skb);
+ q->sop = 1;
+ }
+ ce++;
+ if (++cidx == q->size) {
+ cidx = 0;
+ ce = q->centries;
+ }
+ }
+ q->cidx = cidx;
+}
+
+/*
+ * Free TX resources.
+ *
+ * Assumes that SGE is stopped and all interrupts are disabled.
+ */
+static void free_tx_resources(struct sge *sge)
+{
+ struct pci_dev *pdev = sge->adapter->pdev;
+ unsigned int size, i;
+
+ for (i = 0; i < SGE_CMDQ_N; i++) {
+ struct cmdQ *q = &sge->cmdQ[i];
+
+ if (q->centries) {
+ if (q->in_use)
+ free_cmdQ_buffers(sge, q, q->in_use);
+ kfree(q->centries);
+ }
+ if (q->entries) {
+ size = sizeof(struct cmdQ_e) * q->size;
+ pci_free_consistent(pdev, size, q->entries,
+ q->dma_addr);
+ }
+ }
+}
+
+/*
+ * Allocates basic TX resources, consisting of memory mapped command Qs.
+ */
+static int alloc_tx_resources(struct sge *sge, struct sge_params *p)
+{
+ struct pci_dev *pdev = sge->adapter->pdev;
+ unsigned int size, i;
+
+ for (i = 0; i < SGE_CMDQ_N; i++) {
+ struct cmdQ *q = &sge->cmdQ[i];
+
+ q->genbit = 1;
+ q->sop = 1;
+ q->size = p->cmdQ_size[i];
+ q->in_use = 0;
+ q->status = 0;
+ q->processed = q->cleaned = 0;
+ q->stop_thres = 0;
+ spin_lock_init(&q->lock);
+ size = sizeof(struct cmdQ_e) * q->size;
+ q->entries = (struct cmdQ_e *)
+ pci_alloc_consistent(pdev, size, &q->dma_addr);
+ if (!q->entries)
+ goto err_no_mem;
+ memset(q->entries, 0, size);
+ size = sizeof(struct cmdQ_ce) * q->size;
+ q->centries = kmalloc(size, GFP_KERNEL);
+ if (!q->centries)
+ goto err_no_mem;
+ memset(q->centries, 0, size);
+ }
+
+ /*
+ * CommandQ 0 handles Ethernet and TOE packets, while queue 1 is TOE
+ * only. For queue 0 set the stop threshold so we can handle one more
+ * packet from each port, plus reserve an additional 24 entries for
+ * Ethernet packets only. Queue 1 never suspends nor do we reserve
+ * space for Ethernet packets.
+ */
+ sge->cmdQ[0].stop_thres = sge->adapter->params.nports *
+ (MAX_SKB_FRAGS + 1);
+ return 0;
+
+err_no_mem:
+ free_tx_resources(sge);
+ return -ENOMEM;
+}
+
+static inline void setup_ring_params(struct adapter *adapter, u64 addr,
+ u32 size, int base_reg_lo,
+ int base_reg_hi, int size_reg)
+{
+ writel((u32)addr, adapter->regs + base_reg_lo);
+ writel(addr >> 32, adapter->regs + base_reg_hi);
+ writel(size, adapter->regs + size_reg);
+}
+
+/*
+ * Enable/disable VLAN acceleration.
+ */
+void t1_set_vlan_accel(struct adapter *adapter, int on_off)
+{
+ struct sge *sge = adapter->sge;
+
+ sge->sge_control &= ~F_VLAN_XTRACT;
+ if (on_off)
+ sge->sge_control |= F_VLAN_XTRACT;
+ if (adapter->open_device_map) {
+ writel(sge->sge_control, adapter->regs + A_SG_CONTROL);
+ readl(adapter->regs + A_SG_CONTROL); /* flush */
+ }
+}
+
+/*
+ * Programs the various SGE registers. However, the engine is not yet enabled,
+ * but sge->sge_control is setup and ready to go.
+ */
+static void configure_sge(struct sge *sge, struct sge_params *p)
+{
+ struct adapter *ap = sge->adapter;
+
+ writel(0, ap->regs + A_SG_CONTROL);
+ setup_ring_params(ap, sge->cmdQ[0].dma_addr, sge->cmdQ[0].size,
+ A_SG_CMD0BASELWR, A_SG_CMD0BASEUPR, A_SG_CMD0SIZE);
+ setup_ring_params(ap, sge->cmdQ[1].dma_addr, sge->cmdQ[1].size,
+ A_SG_CMD1BASELWR, A_SG_CMD1BASEUPR, A_SG_CMD1SIZE);
+ setup_ring_params(ap, sge->freelQ[0].dma_addr,
+ sge->freelQ[0].size, A_SG_FL0BASELWR,
+ A_SG_FL0BASEUPR, A_SG_FL0SIZE);
+ setup_ring_params(ap, sge->freelQ[1].dma_addr,
+ sge->freelQ[1].size, A_SG_FL1BASELWR,
+ A_SG_FL1BASEUPR, A_SG_FL1SIZE);
+
+ /* The threshold comparison uses <. */
+ writel(SGE_RX_SM_BUF_SIZE + 1, ap->regs + A_SG_FLTHRESHOLD);
+
+ setup_ring_params(ap, sge->respQ.dma_addr, sge->respQ.size,
+ A_SG_RSPBASELWR, A_SG_RSPBASEUPR, A_SG_RSPSIZE);
+ writel((u32)sge->respQ.size - 1, ap->regs + A_SG_RSPQUEUECREDIT);
+
+ sge->sge_control = F_CMDQ0_ENABLE | F_CMDQ1_ENABLE | F_FL0_ENABLE |
+ F_FL1_ENABLE | F_CPL_ENABLE | F_RESPONSE_QUEUE_ENABLE |
+ V_CMDQ_PRIORITY(2) | F_DISABLE_CMDQ1_GTS | F_ISCSI_COALESCE |
+ F_DISABLE_FL0_GTS | F_DISABLE_FL1_GTS |
+ V_RX_PKT_OFFSET(sge->rx_pkt_pad);
+
+#if defined(__BIG_ENDIAN_BITFIELD)
+ sge->sge_control |= F_ENABLE_BIG_ENDIAN;
+#endif
+
+ /* Initialize no-resource timer */
+ sge->intrtimer_nres = SGE_INTRTIMER_NRES * core_ticks_per_usec(ap);
+
+ t1_sge_set_coalesce_params(sge, p);
+}
+
+/*
+ * Return the payload capacity of the jumbo free-list buffers.
+ */
+static inline unsigned int jumbo_payload_capacity(const struct sge *sge)
+{
+ return sge->freelQ[sge->jumbo_fl].rx_buffer_size -
+ sge->freelQ[sge->jumbo_fl].dma_offset -
+ sizeof(struct cpl_rx_data);
+}
+
+/*
+ * Frees all SGE related resources and the sge structure itself
+ */
+void t1_sge_destroy(struct sge *sge)
+{
+ if (sge->espibug_skb)
+ kfree_skb(sge->espibug_skb);
+
+ free_tx_resources(sge);
+ free_rx_resources(sge);
+ kfree(sge);
+}
+
+/*
+ * Allocates new RX buffers on the freelist Q (and tracks them on the freelist
+ * context Q) until the Q is full or alloc_skb fails.
+ *
+ * It is possible that the generation bits already match, indicating that the
+ * buffer is already valid and nothing needs to be done. This happens when we
+ * copied a received buffer into a new sk_buff during the interrupt processing.
+ *
+ * If the SGE doesn't automatically align packets properly (!sge->rx_pkt_pad),
+ * we specify a RX_OFFSET in order to make sure that the IP header is 4B
+ * aligned.
+ */
+static void refill_free_list(struct sge *sge, struct freelQ *q)
+{
+ struct pci_dev *pdev = sge->adapter->pdev;
+ struct freelQ_ce *ce = &q->centries[q->pidx];
+ struct freelQ_e *e = &q->entries[q->pidx];
+ unsigned int dma_len = q->rx_buffer_size - q->dma_offset;
+
+
+ while (q->credits < q->size) {
+ struct sk_buff *skb;
+ dma_addr_t mapping;
+
+ skb = alloc_skb(q->rx_buffer_size, GFP_ATOMIC);
+ if (!skb)
+ break;
+
+ skb_reserve(skb, q->dma_offset);
+ mapping = pci_map_single(pdev, skb->data, dma_len,
+ PCI_DMA_FROMDEVICE);
+ ce->skb = skb;
+ pci_unmap_addr_set(ce, dma_addr, mapping);
+ pci_unmap_len_set(ce, dma_len, dma_len);
+ e->addr_lo = (u32)mapping;
+ e->addr_hi = (u64)mapping >> 32;
+ e->len_gen = V_CMD_LEN(dma_len) | V_CMD_GEN1(q->genbit);
+ wmb();
+ e->gen2 = V_CMD_GEN2(q->genbit);
+
+ e++;
+ ce++;
+ if (++q->pidx == q->size) {
+ q->pidx = 0;
+ q->genbit ^= 1;
+ ce = q->centries;
+ e = q->entries;
+ }
+ q->credits++;
+ }
+
+}
+
+/*
+ * Calls refill_free_list for both free lists. If we cannot fill at least 1/4
+ * of both rings, we go into 'few interrupt mode' in order to give the system
+ * time to free up resources.
+ */
+static void freelQs_empty(struct sge *sge)
+{
+ struct adapter *adapter = sge->adapter;
+ u32 irq_reg = readl(adapter->regs + A_SG_INT_ENABLE);
+ u32 irqholdoff_reg;
+
+ refill_free_list(sge, &sge->freelQ[0]);
+ refill_free_list(sge, &sge->freelQ[1]);
+
+ if (sge->freelQ[0].credits > (sge->freelQ[0].size >> 2) &&
+ sge->freelQ[1].credits > (sge->freelQ[1].size >> 2)) {
+ irq_reg |= F_FL_EXHAUSTED;
+ irqholdoff_reg = sge->fixed_intrtimer;
+ } else {
+ /* Clear the F_FL_EXHAUSTED interrupts for now */
+ irq_reg &= ~F_FL_EXHAUSTED;
+ irqholdoff_reg = sge->intrtimer_nres;
+ }
+ writel(irqholdoff_reg, adapter->regs + A_SG_INTRTIMER);
+ writel(irq_reg, adapter->regs + A_SG_INT_ENABLE);
+
+ /* We reenable the Qs to force a freelist GTS interrupt later */
+ doorbell_pio(adapter, F_FL0_ENABLE | F_FL1_ENABLE);
+}
+
+#define SGE_PL_INTR_MASK (F_PL_INTR_SGE_ERR | F_PL_INTR_SGE_DATA)
+#define SGE_INT_FATAL (F_RESPQ_OVERFLOW | F_PACKET_TOO_BIG | F_PACKET_MISMATCH)
+#define SGE_INT_ENABLE (F_RESPQ_EXHAUSTED | F_RESPQ_OVERFLOW | \
+ F_FL_EXHAUSTED | F_PACKET_TOO_BIG | F_PACKET_MISMATCH)
+
+/*
+ * Disable SGE Interrupts
+ */
+void t1_sge_intr_disable(struct sge *sge)
+{
+ u32 val = readl(sge->adapter->regs + A_PL_ENABLE);
+
+ writel(val & ~SGE_PL_INTR_MASK, sge->adapter->regs + A_PL_ENABLE);
+ writel(0, sge->adapter->regs + A_SG_INT_ENABLE);
+}
+
+/*
+ * Enable SGE interrupts.
+ */
+void t1_sge_intr_enable(struct sge *sge)
+{
+ u32 en = SGE_INT_ENABLE;
+ u32 val = readl(sge->adapter->regs + A_PL_ENABLE);
+
+ if (sge->adapter->flags & TSO_CAPABLE)
+ en &= ~F_PACKET_TOO_BIG;
+ writel(en, sge->adapter->regs + A_SG_INT_ENABLE);
+ writel(val | SGE_PL_INTR_MASK, sge->adapter->regs + A_PL_ENABLE);
+}
+
+/*
+ * Clear SGE interrupts.
+ */
+void t1_sge_intr_clear(struct sge *sge)
+{
+ writel(SGE_PL_INTR_MASK, sge->adapter->regs + A_PL_CAUSE);
+ writel(0xffffffff, sge->adapter->regs + A_SG_INT_CAUSE);
+}
+
+/*
+ * SGE 'Error' interrupt handler
+ */
+int t1_sge_intr_error_handler(struct sge *sge)
+{
+ struct adapter *adapter = sge->adapter;
+ u32 cause = readl(adapter->regs + A_SG_INT_CAUSE);
+
+ if (adapter->flags & TSO_CAPABLE)
+ cause &= ~F_PACKET_TOO_BIG;
+ if (cause & F_RESPQ_EXHAUSTED)
+ sge->stats.respQ_empty++;
+ if (cause & F_RESPQ_OVERFLOW) {
+ sge->stats.respQ_overflow++;
+ CH_ALERT("%s: SGE response queue overflow\n",
+ adapter->name);
+ }
+ if (cause & F_FL_EXHAUSTED) {
+ sge->stats.freelistQ_empty++;
+ freelQs_empty(sge);
+ }
+ if (cause & F_PACKET_TOO_BIG) {
+ sge->stats.pkt_too_big++;
+ CH_ALERT("%s: SGE max packet size exceeded\n",
+ adapter->name);
+ }
+ if (cause & F_PACKET_MISMATCH) {
+ sge->stats.pkt_mismatch++;
+ CH_ALERT("%s: SGE packet mismatch\n", adapter->name);
+ }
+ if (cause & SGE_INT_FATAL)
+ t1_fatal_err(adapter);
+
+ writel(cause, adapter->regs + A_SG_INT_CAUSE);
+ return 0;
+}
+
+const struct sge_intr_counts *t1_sge_get_intr_counts(struct sge *sge)
+{
+ return &sge->stats;
+}
+
+const struct sge_port_stats *t1_sge_get_port_stats(struct sge *sge, int port)
+{
+ return &sge->port_stats[port];
+}
+
+/**
+ * recycle_fl_buf - recycle a free list buffer
+ * @fl: the free list
+ * @idx: index of buffer to recycle
+ *
+ * Recycles the specified buffer on the given free list by adding it at
+ * the next available slot on the list.
+ */
+static void recycle_fl_buf(struct freelQ *fl, int idx)
+{
+ struct freelQ_e *from = &fl->entries[idx];
+ struct freelQ_e *to = &fl->entries[fl->pidx];
+
+ fl->centries[fl->pidx] = fl->centries[idx];
+ to->addr_lo = from->addr_lo;
+ to->addr_hi = from->addr_hi;
+ to->len_gen = G_CMD_LEN(from->len_gen) | V_CMD_GEN1(fl->genbit);
+ wmb();
+ to->gen2 = V_CMD_GEN2(fl->genbit);
+ fl->credits++;
+
+ if (++fl->pidx == fl->size) {
+ fl->pidx = 0;
+ fl->genbit ^= 1;
+ }
+}
+
+/**
+ * get_packet - return the next ingress packet buffer
+ * @pdev: the PCI device that received the packet
+ * @fl: the SGE free list holding the packet
+ * @len: the actual packet length, excluding any SGE padding
+ * @dma_pad: padding at beginning of buffer left by SGE DMA
+ * @skb_pad: padding to be used if the packet is copied
+ * @copy_thres: length threshold under which a packet should be copied
+ * @drop_thres: # of remaining buffers before we start dropping packets
+ *
+ * Get the next packet from a free list and complete setup of the
+ * sk_buff. If the packet is small we make a copy and recycle the
+ * original buffer, otherwise we use the original buffer itself. If a
+ * positive drop threshold is supplied packets are dropped and their
+ * buffers recycled if (a) the number of remaining buffers is under the
+ * threshold and the packet is too big to copy, or (b) the packet should
+ * be copied but there is no memory for the copy.
+ */
+static inline struct sk_buff *get_packet(struct pci_dev *pdev,
+ struct freelQ *fl, unsigned int len,
+ int dma_pad, int skb_pad,
+ unsigned int copy_thres,
+ unsigned int drop_thres)
+{
+ struct sk_buff *skb;
+ struct freelQ_ce *ce = &fl->centries[fl->cidx];
+
+ if (len < copy_thres) {
+ skb = alloc_skb(len + skb_pad, GFP_ATOMIC);
+ if (likely(skb != NULL)) {
+ skb_reserve(skb, skb_pad);
+ skb_put(skb, len);
+ pci_dma_sync_single_for_cpu(pdev,
+ pci_unmap_addr(ce, dma_addr),
+ pci_unmap_len(ce, dma_len),
+ PCI_DMA_FROMDEVICE);
+ memcpy(skb->data, ce->skb->data + dma_pad, len);
+ pci_dma_sync_single_for_device(pdev,
+ pci_unmap_addr(ce, dma_addr),
+ pci_unmap_len(ce, dma_len),
+ PCI_DMA_FROMDEVICE);
+ } else if (!drop_thres)
+ goto use_orig_buf;
+
+ recycle_fl_buf(fl, fl->cidx);
+ return skb;
+ }
+
+ if (fl->credits < drop_thres) {
+ recycle_fl_buf(fl, fl->cidx);
+ return NULL;
+ }
+
+use_orig_buf:
+ pci_unmap_single(pdev, pci_unmap_addr(ce, dma_addr),
+ pci_unmap_len(ce, dma_len), PCI_DMA_FROMDEVICE);
+ skb = ce->skb;
+ skb_reserve(skb, dma_pad);
+ skb_put(skb, len);
+ return skb;
+}
+
+/**
+ * unexpected_offload - handle an unexpected offload packet
+ * @adapter: the adapter
+ * @fl: the free list that received the packet
+ *
+ * Called when we receive an unexpected offload packet (e.g., the TOE
+ * function is disabled or the card is a NIC). Prints a message and
+ * recycles the buffer.
+ */
+static void unexpected_offload(struct adapter *adapter, struct freelQ *fl)
+{
+ struct freelQ_ce *ce = &fl->centries[fl->cidx];
+ struct sk_buff *skb = ce->skb;
+
+ pci_dma_sync_single_for_cpu(adapter->pdev, pci_unmap_addr(ce, dma_addr),
+ pci_unmap_len(ce, dma_len), PCI_DMA_FROMDEVICE);
+ CH_ERR("%s: unexpected offload packet, cmd %u\n",
+ adapter->name, *skb->data);
+ recycle_fl_buf(fl, fl->cidx);
+}
+
+/*
+ * Write the command descriptors to transmit the given skb starting at
+ * descriptor pidx with the given generation.
+ */
+static inline void write_tx_descs(struct adapter *adapter, struct sk_buff *skb,
+ unsigned int pidx, unsigned int gen,
+ struct cmdQ *q)
+{
+ dma_addr_t mapping;
+ struct cmdQ_e *e, *e1;
+ struct cmdQ_ce *ce;
+ unsigned int i, flags, nfrags = skb_shinfo(skb)->nr_frags;
+
+ mapping = pci_map_single(adapter->pdev, skb->data,
+ skb->len - skb->data_len, PCI_DMA_TODEVICE);
+ ce = &q->centries[pidx];
+ ce->skb = NULL;
+ pci_unmap_addr_set(ce, dma_addr, mapping);
+ pci_unmap_len_set(ce, dma_len, skb->len - skb->data_len);
+
+ flags = F_CMD_DATAVALID | F_CMD_SOP | V_CMD_EOP(nfrags == 0) |
+ V_CMD_GEN2(gen);
+ e = &q->entries[pidx];
+ e->addr_lo = (u32)mapping;
+ e->addr_hi = (u64)mapping >> 32;
+ e->len_gen = V_CMD_LEN(skb->len - skb->data_len) | V_CMD_GEN1(gen);
+ for (e1 = e, i = 0; nfrags--; i++) {
+ skb_frag_t *frag = &skb_shinfo(skb)->frags[i];
+
+ ce++;
+ e1++;
+ if (++pidx == q->size) {
+ pidx = 0;
+ gen ^= 1;
+ ce = q->centries;
+ e1 = q->entries;
+ }
+
+ mapping = pci_map_page(adapter->pdev, frag->page,
+ frag->page_offset, frag->size,
+ PCI_DMA_TODEVICE);
+ ce->skb = NULL;
+ pci_unmap_addr_set(ce, dma_addr, mapping);
+ pci_unmap_len_set(ce, dma_len, frag->size);
+
+ e1->addr_lo = (u32)mapping;
+ e1->addr_hi = (u64)mapping >> 32;
+ e1->len_gen = V_CMD_LEN(frag->size) | V_CMD_GEN1(gen);
+ e1->flags = F_CMD_DATAVALID | V_CMD_EOP(nfrags == 0) |
+ V_CMD_GEN2(gen);
+ }
+
+ ce->skb = skb;
+ wmb();
+ e->flags = flags;
+}
+
+/*
+ * Clean up completed Tx buffers.
+ */
+static inline void reclaim_completed_tx(struct sge *sge, struct cmdQ *q)
+{
+ unsigned int reclaim = q->processed - q->cleaned;
+
+ if (reclaim) {
+ free_cmdQ_buffers(sge, q, reclaim);
+ q->cleaned += reclaim;
+ }
+}
+
+#ifndef SET_ETHTOOL_OPS
+# define __netif_rx_complete(dev) netif_rx_complete(dev)
+#endif
+
+/*
+ * We cannot use the standard netif_rx_schedule_prep() because we have multiple
+ * ports plus the TOE all multiplexing onto a single response queue, therefore
+ * accepting new responses cannot depend on the state of any particular port.
+ * So define our own equivalent that omits the netif_running() test.
+ */
+static inline int napi_schedule_prep(struct net_device *dev)
+{
+ return !test_and_set_bit(__LINK_STATE_RX_SCHED, &dev->state);
+}
+
+
+/**
+ * sge_rx - process an ingress ethernet packet
+ * @sge: the sge structure
+ * @fl: the free list that contains the packet buffer
+ * @len: the packet length
+ *
+ * Process an ingress ethernet pakcet and deliver it to the stack.
+ */
+static int sge_rx(struct sge *sge, struct freelQ *fl, unsigned int len)
+{
+ struct sk_buff *skb;
+ struct cpl_rx_pkt *p;
+ struct adapter *adapter = sge->adapter;
+
+ sge->stats.ethernet_pkts++;
+ skb = get_packet(adapter->pdev, fl, len - sge->rx_pkt_pad,
+ sge->rx_pkt_pad, 2, SGE_RX_COPY_THRES,
+ SGE_RX_DROP_THRES);
+ if (!skb) {
+ sge->port_stats[0].rx_drops++; /* charge only port 0 for now */
+ return 0;
+ }
+
+ p = (struct cpl_rx_pkt *)skb->data;
+ skb_pull(skb, sizeof(*p));
+ skb->dev = adapter->port[p->iff].dev;
+ skb->dev->last_rx = jiffies;
+ skb->protocol = eth_type_trans(skb, skb->dev);
+ if ((adapter->flags & RX_CSUM_ENABLED) && p->csum == 0xffff &&
+ skb->protocol == htons(ETH_P_IP) &&
+ (skb->data[9] == IPPROTO_TCP || skb->data[9] == IPPROTO_UDP)) {
+ sge->port_stats[p->iff].rx_cso_good++;
+ skb->ip_summed = CHECKSUM_UNNECESSARY;
+ } else
+ skb->ip_summed = CHECKSUM_NONE;
+
+ if (unlikely(adapter->vlan_grp && p->vlan_valid)) {
+ sge->port_stats[p->iff].vlan_xtract++;
+ if (adapter->params.sge.polling)
+ vlan_hwaccel_receive_skb(skb, adapter->vlan_grp,
+ ntohs(p->vlan));
+ else
+ vlan_hwaccel_rx(skb, adapter->vlan_grp,
+ ntohs(p->vlan));
+ } else if (adapter->params.sge.polling)
+ netif_receive_skb(skb);
+ else
+ netif_rx(skb);
+ return 0;
+}
+
+/*
+ * Returns true if a command queue has enough available descriptors that
+ * we can resume Tx operation after temporarily disabling its packet queue.
+ */
+static inline int enough_free_Tx_descs(const struct cmdQ *q)
+{
+ unsigned int r = q->processed - q->cleaned;
+
+ return q->in_use - r < (q->size >> 1);
+}
+
+/*
+ * Called when sufficient space has become available in the SGE command queues
+ * after the Tx packet schedulers have been suspended to restart the Tx path.
+ */
+static void restart_tx_queues(struct sge *sge)
+{
+ struct adapter *adap = sge->adapter;
+
+ if (enough_free_Tx_descs(&sge->cmdQ[0])) {
+ int i;
+
+ for_each_port(adap, i) {
+ struct net_device *nd = adap->port[i].dev;
+
+ if (test_and_clear_bit(nd->if_port,
+ &sge->stopped_tx_queues) &&
+ netif_running(nd)) {
+ sge->stats.cmdQ_restarted[3]++;
+ netif_wake_queue(nd);
+ }
+ }
+ }
+}
+
+/*
+ * update_tx_info is called from the interrupt handler/NAPI to return cmdQ0
+ * information.
+ */
+static unsigned int update_tx_info(struct adapter *adapter,
+ unsigned int flags,
+ unsigned int pr0)
+{
+ struct sge *sge = adapter->sge;
+ struct cmdQ *cmdq = &sge->cmdQ[0];
+
+ cmdq->processed += pr0;
+
+ if (flags & F_CMDQ0_ENABLE) {
+ clear_bit(CMDQ_STAT_RUNNING, &cmdq->status);
+
+ if (cmdq->cleaned + cmdq->in_use != cmdq->processed &&
+ !test_and_set_bit(CMDQ_STAT_LAST_PKT_DB, &cmdq->status)) {
+ set_bit(CMDQ_STAT_RUNNING, &cmdq->status);
+ writel(F_CMDQ0_ENABLE, adapter->regs + A_SG_DOORBELL);
+ }
+ flags &= ~F_CMDQ0_ENABLE;
+ }
+
+ if (unlikely(sge->stopped_tx_queues != 0))
+ restart_tx_queues(sge);
+
+ return flags;
+}
+
+/*
+ * Process SGE responses, up to the supplied budget. Returns the number of
+ * responses processed. A negative budget is effectively unlimited.
+ */
+static int process_responses(struct adapter *adapter, int budget)
+{
+ struct sge *sge = adapter->sge;
+ struct respQ *q = &sge->respQ;
+ struct respQ_e *e = &q->entries[q->cidx];
+ int budget_left = budget;
+ unsigned int flags = 0;
+ unsigned int cmdq_processed[SGE_CMDQ_N] = {0, 0};
+
+
+ while (likely(budget_left && e->GenerationBit == q->genbit)) {
+ flags |= e->Qsleeping;
+
+ cmdq_processed[0] += e->Cmdq0CreditReturn;
+ cmdq_processed[1] += e->Cmdq1CreditReturn;
+
+ /* We batch updates to the TX side to avoid cacheline
+ * ping-pong of TX state information on MP where the sender
+ * might run on a different CPU than this function...
+ */
+ if (unlikely(flags & F_CMDQ0_ENABLE || cmdq_processed[0] > 64)) {
+ flags = update_tx_info(adapter, flags, cmdq_processed[0]);
+ cmdq_processed[0] = 0;
+ }
+ if (unlikely(cmdq_processed[1] > 16)) {
+ sge->cmdQ[1].processed += cmdq_processed[1];
+ cmdq_processed[1] = 0;
+ }
+ if (likely(e->DataValid)) {
+ struct freelQ *fl = &sge->freelQ[e->FreelistQid];
+
+ if (unlikely(!e->Sop || !e->Eop))
+ BUG();
+ if (unlikely(e->Offload))
+ unexpected_offload(adapter, fl);
+ else
+ sge_rx(sge, fl, e->BufferLength);
+
+ /*
+ * Note: this depends on each packet consuming a
+ * single free-list buffer; cf. the BUG above.
+ */
+ if (++fl->cidx == fl->size)
+ fl->cidx = 0;
+ if (unlikely(--fl->credits <
+ fl->size - SGE_FREEL_REFILL_THRESH))
+ refill_free_list(sge, fl);
+ } else
+ sge->stats.pure_rsps++;
+
+ e++;
+ if (unlikely(++q->cidx == q->size)) {
+ q->cidx = 0;
+ q->genbit ^= 1;
+ e = q->entries;
+ }
+ prefetch(e);
+
+ if (++q->credits > SGE_RESPQ_REPLENISH_THRES) {
+ writel(q->credits, adapter->regs + A_SG_RSPQUEUECREDIT);
+ q->credits = 0;
+ }
+ --budget_left;
+ }
+
+ flags = update_tx_info(adapter, flags, cmdq_processed[0]);
+ sge->cmdQ[1].processed += cmdq_processed[1];
+
+ budget -= budget_left;
+ return budget;
+}
+
+/*
+ * A simpler version of process_responses() that handles only pure (i.e.,
+ * non data-carrying) responses. Such respones are too light-weight to justify
+ * calling a softirq when using NAPI, so we handle them specially in hard
+ * interrupt context. The function is called with a pointer to a response,
+ * which the caller must ensure is a valid pure response. Returns 1 if it
+ * encounters a valid data-carrying response, 0 otherwise.
+ */
+static int process_pure_responses(struct adapter *adapter, struct respQ_e *e)
+{
+ struct sge *sge = adapter->sge;
+ struct respQ *q = &sge->respQ;
+ unsigned int flags = 0;
+ unsigned int cmdq_processed[SGE_CMDQ_N] = {0, 0};
+
+ do {
+ flags |= e->Qsleeping;
+
+ cmdq_processed[0] += e->Cmdq0CreditReturn;
+ cmdq_processed[1] += e->Cmdq1CreditReturn;
+
+ e++;
+ if (unlikely(++q->cidx == q->size)) {
+ q->cidx = 0;
+ q->genbit ^= 1;
+ e = q->entries;
+ }
+ prefetch(e);
+
+ if (++q->credits > SGE_RESPQ_REPLENISH_THRES) {
+ writel(q->credits, adapter->regs + A_SG_RSPQUEUECREDIT);
+ q->credits = 0;
+ }
+ sge->stats.pure_rsps++;
+ } while (e->GenerationBit == q->genbit && !e->DataValid);
+
+ flags = update_tx_info(adapter, flags, cmdq_processed[0]);
+ sge->cmdQ[1].processed += cmdq_processed[1];
+
+ return e->GenerationBit == q->genbit;
+}
+
+/*
+ * Handler for new data events when using NAPI. This does not need any locking
+ * or protection from interrupts as data interrupts are off at this point and
+ * other adapter interrupts do not interfere.
+ */
+static int t1_poll(struct net_device *dev, int *budget)
+{
+ struct adapter *adapter = dev->priv;
+ int effective_budget = min(*budget, dev->quota);
+
+ int work_done = process_responses(adapter, effective_budget);
+ *budget -= work_done;
+ dev->quota -= work_done;
+
+ if (work_done >= effective_budget)
+ return 1;
+
+ __netif_rx_complete(dev);
+
+ /*
+ * Because we don't atomically flush the following write it is
+ * possible that in very rare cases it can reach the device in a way
+ * that races with a new response being written plus an error interrupt
+ * causing the NAPI interrupt handler below to return unhandled status
+ * to the OS. To protect against this would require flushing the write
+ * and doing both the write and the flush with interrupts off. Way too
+ * expensive and unjustifiable given the rarity of the race.
+ */
+ writel(adapter->sge->respQ.cidx, adapter->regs + A_SG_SLEEPING);
+ return 0;
+}
+
+/*
+ * Returns true if the device is already scheduled for polling.
+ */
+static inline int napi_is_scheduled(struct net_device *dev)
+{
+ return test_bit(__LINK_STATE_RX_SCHED, &dev->state);
+}
+
+/*
+ * NAPI version of the main interrupt handler.
+ */
+static irqreturn_t t1_interrupt_napi(int irq, void *data, struct pt_regs *regs)
+{
+ int handled;
+ struct adapter *adapter = data;
+ struct sge *sge = adapter->sge;
+ struct respQ *q = &adapter->sge->respQ;
+
+ /*
+ * Clear the SGE_DATA interrupt first thing. Normally the NAPI
+ * handler has control of the response queue and the interrupt handler
+ * can look at the queue reliably only once it knows NAPI is off.
+ * We can't wait that long to clear the SGE_DATA interrupt because we
+ * could race with t1_poll rearming the SGE interrupt, so we need to
+ * clear the interrupt speculatively and really early on.
+ */
+ writel(F_PL_INTR_SGE_DATA, adapter->regs + A_PL_CAUSE);
+
+ spin_lock(&adapter->async_lock);
+ if (!napi_is_scheduled(sge->netdev)) {
+ struct respQ_e *e = &q->entries[q->cidx];
+
+ if (e->GenerationBit == q->genbit) {
+ if (e->DataValid ||
+ process_pure_responses(adapter, e)) {
+ if (likely(napi_schedule_prep(sge->netdev)))
+ __netif_rx_schedule(sge->netdev);
+ else
+ printk(KERN_CRIT
+ "NAPI schedule failure!\n");
+ } else
+ writel(q->cidx, adapter->regs + A_SG_SLEEPING);
+ handled = 1;
+ goto unlock;
+ } else
+ writel(q->cidx, adapter->regs + A_SG_SLEEPING);
+ } else
+ if (readl(adapter->regs + A_PL_CAUSE) & F_PL_INTR_SGE_DATA)
+ printk(KERN_ERR "data interrupt while NAPI running\n");
+
+ handled = t1_slow_intr_handler(adapter);
+ if (!handled)
+ sge->stats.unhandled_irqs++;
+ unlock:
+ spin_unlock(&adapter->async_lock);
+ return IRQ_RETVAL(handled != 0);
+}
+
+/*
+ * Main interrupt handler, optimized assuming that we took a 'DATA'
+ * interrupt.
+ *
+ * 1. Clear the interrupt
+ * 2. Loop while we find valid descriptors and process them; accumulate
+ * information that can be processed after the loop
+ * 3. Tell the SGE at which index we stopped processing descriptors
+ * 4. Bookkeeping; free TX buffers, ring doorbell if there are any
+ * outstanding TX buffers waiting, replenish RX buffers, potentially
+ * reenable upper layers if they were turned off due to lack of TX
+ * resources which are available again.
+ * 5. If we took an interrupt, but no valid respQ descriptors was found we
+ * let the slow_intr_handler run and do error handling.
+ */
+static irqreturn_t t1_interrupt(int irq, void *cookie, struct pt_regs *regs)
+{
+ int work_done;
+ struct respQ_e *e;
+ struct adapter *adapter = cookie;
+ struct respQ *Q = &adapter->sge->respQ;
+
+ spin_lock(&adapter->async_lock);
+ e = &Q->entries[Q->cidx];
+ prefetch(e);
+
+ writel(F_PL_INTR_SGE_DATA, adapter->regs + A_PL_CAUSE);
+
+ if (likely(e->GenerationBit == Q->genbit))
+ work_done = process_responses(adapter, -1);
+ else
+ work_done = t1_slow_intr_handler(adapter);
+
+ /*
+ * The unconditional clearing of the PL_CAUSE above may have raced
+ * with DMA completion and the corresponding generation of a response
+ * to cause us to miss the resulting data interrupt. The next write
+ * is also unconditional to recover the missed interrupt and render
+ * this race harmless.
+ */
+ writel(Q->cidx, adapter->regs + A_SG_SLEEPING);
+
+ if (!work_done)
+ adapter->sge->stats.unhandled_irqs++;
+ spin_unlock(&adapter->async_lock);
+ return IRQ_RETVAL(work_done != 0);
+}
+
+intr_handler_t t1_select_intr_handler(adapter_t *adapter)
+{
+ return adapter->params.sge.polling ? t1_interrupt_napi : t1_interrupt;
+}
+
+/*
+ * Enqueues the sk_buff onto the cmdQ[qid] and has hardware fetch it.
+ *
+ * The code figures out how many entries the sk_buff will require in the
+ * cmdQ and updates the cmdQ data structure with the state once the enqueue
+ * has complete. Then, it doesn't access the global structure anymore, but
+ * uses the corresponding fields on the stack. In conjuction with a spinlock
+ * around that code, we can make the function reentrant without holding the
+ * lock when we actually enqueue (which might be expensive, especially on
+ * architectures with IO MMUs).
+ *
+ * This runs with softirqs disabled.
+ */
+unsigned int t1_sge_tx(struct sk_buff *skb, struct adapter *adapter,
+ unsigned int qid, struct net_device *dev)
+{
+ struct sge *sge = adapter->sge;
+ struct cmdQ *q = &sge->cmdQ[qid];
+ unsigned int credits, pidx, genbit, count;
+
+ spin_lock(&q->lock);
+ reclaim_completed_tx(sge, q);
+
+ pidx = q->pidx;
+ credits = q->size - q->in_use;
+ count = 1 + skb_shinfo(skb)->nr_frags;
+
+ { /* Ethernet packet */
+ if (unlikely(credits < count)) {
+ netif_stop_queue(dev);
+ set_bit(dev->if_port, &sge->stopped_tx_queues);
+ sge->stats.cmdQ_full[3]++;
+ spin_unlock(&q->lock);
+ CH_ERR("%s: Tx ring full while queue awake!\n",
+ adapter->name);
+ return 1;
+ }
+ if (unlikely(credits - count < q->stop_thres)) {
+ sge->stats.cmdQ_full[3]++;
+ netif_stop_queue(dev);
+ set_bit(dev->if_port, &sge->stopped_tx_queues);
+ }
+ }
+ q->in_use += count;
+ genbit = q->genbit;
+ q->pidx += count;
+ if (q->pidx >= q->size) {
+ q->pidx -= q->size;
+ q->genbit ^= 1;
+ }
+ spin_unlock(&q->lock);
+
+ write_tx_descs(adapter, skb, pidx, genbit, q);
+
+ /*
+ * We always ring the doorbell for cmdQ1. For cmdQ0, we only ring
+ * the doorbell if the Q is asleep. There is a natural race, where
+ * the hardware is going to sleep just after we checked, however,
+ * then the interrupt handler will detect the outstanding TX packet
+ * and ring the doorbell for us.
+ */
+ if (qid)
+ doorbell_pio(adapter, F_CMDQ1_ENABLE);
+ else {
+ clear_bit(CMDQ_STAT_LAST_PKT_DB, &q->status);
+ if (test_and_set_bit(CMDQ_STAT_RUNNING, &q->status) == 0) {
+ set_bit(CMDQ_STAT_LAST_PKT_DB, &q->status);
+ writel(F_CMDQ0_ENABLE, adapter->regs + A_SG_DOORBELL);
+ }
+ }
+ return 0;
+}
+
+#define MK_ETH_TYPE_MSS(type, mss) (((mss) & 0x3FFF) | ((type) << 14))
+
+/*
+ * eth_hdr_len - return the length of an Ethernet header
+ * @data: pointer to the start of the Ethernet header
+ *
+ * Returns the length of an Ethernet header, including optional VLAN tag.
+ */
+static inline int eth_hdr_len(const void *data)
+{
+ const struct ethhdr *e = data;
+
+ return e->h_proto == htons(ETH_P_8021Q) ? VLAN_ETH_HLEN : ETH_HLEN;
+}
+
+/*
+ * Adds the CPL header to the sk_buff and passes it to t1_sge_tx.
+ */
+int t1_start_xmit(struct sk_buff *skb, struct net_device *dev)
+{
+ struct adapter *adapter = dev->priv;
+ struct sge_port_stats *st = &adapter->sge->port_stats[dev->if_port];
+ struct sge *sge = adapter->sge;
+ struct cpl_tx_pkt *cpl;
+
+#ifdef NETIF_F_TSO
+ if (skb_shinfo(skb)->tso_size) {
+ int eth_type;
+ struct cpl_tx_pkt_lso *hdr;
+
+ st->tso++;
+
+ eth_type = skb->nh.raw - skb->data == ETH_HLEN ?
+ CPL_ETH_II : CPL_ETH_II_VLAN;
+
+ hdr = (struct cpl_tx_pkt_lso *)skb_push(skb, sizeof(*hdr));
+ hdr->opcode = CPL_TX_PKT_LSO;
+ hdr->ip_csum_dis = hdr->l4_csum_dis = 0;
+ hdr->ip_hdr_words = skb->nh.iph->ihl;
+ hdr->tcp_hdr_words = skb->h.th->doff;
+ hdr->eth_type_mss = htons(MK_ETH_TYPE_MSS(eth_type,
+ skb_shinfo(skb)->tso_size));
+ hdr->len = htonl(skb->len - sizeof(*hdr));
+ cpl = (struct cpl_tx_pkt *)hdr;
+ sge->stats.tx_lso_pkts++;
+ } else
+#endif
+ {
+ /*
+ * Packets shorter than ETH_HLEN can break the MAC, drop them
+ * early. Also, we may get oversized packets because some
+ * parts of the kernel don't handle our unusual hard_header_len
+ * right, drop those too.
+ */
+ if (unlikely(skb->len < ETH_HLEN ||
+ skb->len > dev->mtu + eth_hdr_len(skb->data))) {
+ dev_kfree_skb_any(skb);
+ return NET_XMIT_SUCCESS;
+ }
+
+ /*
+ * We are using a non-standard hard_header_len and some kernel
+ * components, such as pktgen, do not handle it right.
+ * Complain when this happens but try to fix things up.
+ */
+ if (unlikely(skb_headroom(skb) <
+ dev->hard_header_len - ETH_HLEN)) {
+ struct sk_buff *orig_skb = skb;
+
+ if (net_ratelimit())
+ printk(KERN_ERR "%s: inadequate headroom in "
+ "Tx packet\n", dev->name);
+ skb = skb_realloc_headroom(skb, sizeof(*cpl));
+ dev_kfree_skb_any(orig_skb);
+ if (!skb)
+ return -ENOMEM;
+ }
+
+ if (!(adapter->flags & UDP_CSUM_CAPABLE) &&
+ skb->ip_summed == CHECKSUM_HW &&
+ skb->nh.iph->protocol == IPPROTO_UDP)
+ if (unlikely(skb_checksum_help(skb, 0))) {
+ dev_kfree_skb_any(skb);
+ return -ENOMEM;
+ }
+
+ /* Hmmm, assuming to catch the gratious arp... and we'll use
+ * it to flush out stuck espi packets...
+ */
+ if (unlikely(!adapter->sge->espibug_skb)) {
+ if (skb->protocol == htons(ETH_P_ARP) &&
+ skb->nh.arph->ar_op == htons(ARPOP_REQUEST)) {
+ adapter->sge->espibug_skb = skb;
+ /* We want to re-use this skb later. We
+ * simply bump the reference count and it
+ * will not be freed...
+ */
+ skb = skb_get(skb);
+ }
+ }
+
+ cpl = (struct cpl_tx_pkt *)__skb_push(skb, sizeof(*cpl));
+ cpl->opcode = CPL_TX_PKT;
+ cpl->ip_csum_dis = 1; /* SW calculates IP csum */
+ cpl->l4_csum_dis = skb->ip_summed == CHECKSUM_HW ? 0 : 1;
+ /* the length field isn't used so don't bother setting it */
+
+ st->tx_cso += (skb->ip_summed == CHECKSUM_HW);
+ sge->stats.tx_do_cksum += (skb->ip_summed == CHECKSUM_HW);
+ sge->stats.tx_reg_pkts++;
+ }
+ cpl->iff = dev->if_port;
+
+#if defined(CONFIG_VLAN_8021Q) || defined(CONFIG_VLAN_8021Q_MODULE)
+ if (adapter->vlan_grp && vlan_tx_tag_present(skb)) {
+ cpl->vlan_valid = 1;
+ cpl->vlan = htons(vlan_tx_tag_get(skb));
+ st->vlan_insert++;
+ } else
+#endif
+ cpl->vlan_valid = 0;
+
+ dev->trans_start = jiffies;
+ return t1_sge_tx(skb, adapter, 0, dev);
+}
+
+/*
+ * Callback for the Tx buffer reclaim timer. Runs with softirqs disabled.
+ */
+static void sge_tx_reclaim_cb(unsigned long data)
+{
+ int i;
+ struct sge *sge = (struct sge *)data;
+
+ for (i = 0; i < SGE_CMDQ_N; ++i) {
+ struct cmdQ *q = &sge->cmdQ[i];
+
+ if (!spin_trylock(&q->lock))
+ continue;
+
+ reclaim_completed_tx(sge, q);
+ if (i == 0 && q->in_use) /* flush pending credits */
+ writel(F_CMDQ0_ENABLE,
+ sge->adapter->regs + A_SG_DOORBELL);
+
+ spin_unlock(&q->lock);
+ }
+ mod_timer(&sge->tx_reclaim_timer, jiffies + TX_RECLAIM_PERIOD);
+}
+
+/*
+ * Propagate changes of the SGE coalescing parameters to the HW.
+ */
+int t1_sge_set_coalesce_params(struct sge *sge, struct sge_params *p)
+{
+ sge->netdev->poll = t1_poll;
+ sge->fixed_intrtimer = p->rx_coalesce_usecs *
+ core_ticks_per_usec(sge->adapter);
+ writel(sge->fixed_intrtimer, sge->adapter->regs + A_SG_INTRTIMER);
+ return 0;
+}
+
+/*
+ * Allocates both RX and TX resources and configures the SGE. However,
+ * the hardware is not enabled yet.
+ */
+int t1_sge_configure(struct sge *sge, struct sge_params *p)
+{
+ if (alloc_rx_resources(sge, p))
+ return -ENOMEM;
+ if (alloc_tx_resources(sge, p)) {
+ free_rx_resources(sge);
+ return -ENOMEM;
+ }
+ configure_sge(sge, p);
+
+ /*
+ * Now that we have sized the free lists calculate the payload
+ * capacity of the large buffers. Other parts of the driver use
+ * this to set the max offload coalescing size so that RX packets
+ * do not overflow our large buffers.
+ */
+ p->large_buf_capacity = jumbo_payload_capacity(sge);
+ return 0;
+}
+
+/*
+ * Disables the DMA engine.
+ */
+void t1_sge_stop(struct sge *sge)
+{
+ writel(0, sge->adapter->regs + A_SG_CONTROL);
+ (void) readl(sge->adapter->regs + A_SG_CONTROL); /* flush */
+ if (is_T2(sge->adapter))
+ del_timer_sync(&sge->espibug_timer);
+ del_timer_sync(&sge->tx_reclaim_timer);
+}
+
+/*
+ * Enables the DMA engine.
+ */
+void t1_sge_start(struct sge *sge)
+{
+ refill_free_list(sge, &sge->freelQ[0]);
+ refill_free_list(sge, &sge->freelQ[1]);
+
+ writel(sge->sge_control, sge->adapter->regs + A_SG_CONTROL);
+ doorbell_pio(sge->adapter, F_FL0_ENABLE | F_FL1_ENABLE);
+ (void) readl(sge->adapter->regs + A_SG_CONTROL); /* flush */
+
+ mod_timer(&sge->tx_reclaim_timer, jiffies + TX_RECLAIM_PERIOD);
+
+ if (is_T2(sge->adapter))
+ mod_timer(&sge->espibug_timer, jiffies + sge->espibug_timeout);
+}
+
+/*
+ * Callback for the T2 ESPI 'stuck packet feature' workaorund
+ */
+static void espibug_workaround(void *data)
+{
+ struct adapter *adapter = (struct adapter *)data;
+ struct sge *sge = adapter->sge;
+
+ if (netif_running(adapter->port[0].dev)) {
+ struct sk_buff *skb = sge->espibug_skb;
+
+ u32 seop = t1_espi_get_mon(adapter, 0x930, 0);
+
+ if ((seop & 0xfff0fff) == 0xfff && skb) {
+ if (!skb->cb[0]) {
+ u8 ch_mac_addr[ETH_ALEN] =
+ {0x0, 0x7, 0x43, 0x0, 0x0, 0x0};
+ memcpy(skb->data + sizeof(struct cpl_tx_pkt),
+ ch_mac_addr, ETH_ALEN);
+ memcpy(skb->data + skb->len - 10, ch_mac_addr,
+ ETH_ALEN);
+ skb->cb[0] = 0xff;
+ }
+
+ /* bump the reference count to avoid freeing of the
+ * skb once the DMA has completed.
+ */
+ skb = skb_get(skb);
+ t1_sge_tx(skb, adapter, 0, adapter->port[0].dev);
+ }
+ }
+ mod_timer(&sge->espibug_timer, jiffies + sge->espibug_timeout);
+}
+
+/*
+ * Creates a t1_sge structure and returns suggested resource parameters.
+ */
+struct sge * __devinit t1_sge_create(struct adapter *adapter,
+ struct sge_params *p)
+{
+ struct sge *sge = kmalloc(sizeof(*sge), GFP_KERNEL);
+
+ if (!sge)
+ return NULL;
+ memset(sge, 0, sizeof(*sge));
+
+ sge->adapter = adapter;
+ sge->netdev = adapter->port[0].dev;
+ sge->rx_pkt_pad = t1_is_T1B(adapter) ? 0 : 2;
+ sge->jumbo_fl = t1_is_T1B(adapter) ? 1 : 0;
+
+ init_timer(&sge->tx_reclaim_timer);
+ sge->tx_reclaim_timer.data = (unsigned long)sge;
+ sge->tx_reclaim_timer.function = sge_tx_reclaim_cb;
+
+ if (is_T2(sge->adapter)) {
+ init_timer(&sge->espibug_timer);
+ sge->espibug_timer.function = (void *)&espibug_workaround;
+ sge->espibug_timer.data = (unsigned long)sge->adapter;
+ sge->espibug_timeout = 1;
+ }
+
+
+ p->cmdQ_size[0] = SGE_CMDQ0_E_N;
+ p->cmdQ_size[1] = SGE_CMDQ1_E_N;
+ p->freelQ_size[!sge->jumbo_fl] = SGE_FREEL_SIZE;
+ p->freelQ_size[sge->jumbo_fl] = SGE_JUMBO_FREEL_SIZE;
+ p->rx_coalesce_usecs = 50;
+ p->coalesce_enable = 0;
+ p->sample_interval_usecs = 0;
+ p->polling = 0;
+
+ return sge;
+}
diff --git a/drivers/net/chelsio/sge.h b/drivers/net/chelsio/sge.h
new file mode 100644
index 00000000000..434b2558685
--- /dev/null
+++ b/drivers/net/chelsio/sge.h
@@ -0,0 +1,105 @@
+/*****************************************************************************
+ * *
+ * File: sge.h *
+ * $Revision: 1.11 $ *
+ * $Date: 2005/06/21 22:10:55 $ *
+ * Description: *
+ * part of the Chelsio 10Gb Ethernet Driver. *
+ * *
+ * This program is free software; you can redistribute it and/or modify *
+ * it under the terms of the GNU General Public License, version 2, as *
+ * published by the Free Software Foundation. *
+ * *
+ * You should have received a copy of the GNU General Public License along *
+ * with this program; if not, write to the Free Software Foundation, Inc., *
+ * 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. *
+ * *
+ * THIS SOFTWARE IS PROVIDED ``AS IS'' AND WITHOUT ANY EXPRESS OR IMPLIED *
+ * WARRANTIES, INCLUDING, WITHOUT LIMITATION, THE IMPLIED WARRANTIES OF *
+ * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. *
+ * *
+ * http://www.chelsio.com *
+ * *
+ * Copyright (c) 2003 - 2005 Chelsio Communications, Inc. *
+ * All rights reserved. *
+ * *
+ * Maintainers: maintainers@chelsio.com *
+ * *
+ * Authors: Dimitrios Michailidis <dm@chelsio.com> *
+ * Tina Yang <tainay@chelsio.com> *
+ * Felix Marti <felix@chelsio.com> *
+ * Scott Bardone <sbardone@chelsio.com> *
+ * Kurt Ottaway <kottaway@chelsio.com> *
+ * Frank DiMambro <frank@chelsio.com> *
+ * *
+ * History: *
+ * *
+ ****************************************************************************/
+
+#ifndef _CXGB_SGE_H_
+#define _CXGB_SGE_H_
+
+#include <linux/types.h>
+#include <linux/interrupt.h>
+#include <asm/byteorder.h>
+
+#ifndef IRQ_RETVAL
+#define IRQ_RETVAL(x)
+typedef void irqreturn_t;
+#endif
+
+typedef irqreturn_t (*intr_handler_t)(int, void *, struct pt_regs *);
+
+struct sge_intr_counts {
+ unsigned int respQ_empty; /* # times respQ empty */
+ unsigned int respQ_overflow; /* # respQ overflow (fatal) */
+ unsigned int freelistQ_empty; /* # times freelist empty */
+ unsigned int pkt_too_big; /* packet too large (fatal) */
+ unsigned int pkt_mismatch;
+ unsigned int cmdQ_full[3]; /* not HW IRQ, host cmdQ[] full */
+ unsigned int cmdQ_restarted[3];/* # of times cmdQ X was restarted */
+ unsigned int ethernet_pkts; /* # of Ethernet packets received */
+ unsigned int offload_pkts; /* # of offload packets received */
+ unsigned int offload_bundles; /* # of offload pkt bundles delivered */
+ unsigned int pure_rsps; /* # of non-payload responses */
+ unsigned int unhandled_irqs; /* # of unhandled interrupts */
+ unsigned int tx_ipfrags;
+ unsigned int tx_reg_pkts;
+ unsigned int tx_lso_pkts;
+ unsigned int tx_do_cksum;
+};
+
+struct sge_port_stats {
+ unsigned long rx_cso_good; /* # of successful RX csum offloads */
+ unsigned long tx_cso; /* # of TX checksum offloads */
+ unsigned long vlan_xtract; /* # of VLAN tag extractions */
+ unsigned long vlan_insert; /* # of VLAN tag extractions */
+ unsigned long tso; /* # of TSO requests */
+ unsigned long rx_drops; /* # of packets dropped due to no mem */
+};
+
+struct sk_buff;
+struct net_device;
+struct adapter;
+struct sge_params;
+struct sge;
+
+struct sge *t1_sge_create(struct adapter *, struct sge_params *);
+int t1_sge_configure(struct sge *, struct sge_params *);
+int t1_sge_set_coalesce_params(struct sge *, struct sge_params *);
+void t1_sge_destroy(struct sge *);
+intr_handler_t t1_select_intr_handler(adapter_t *adapter);
+unsigned int t1_sge_tx(struct sk_buff *skb, struct adapter *adapter,
+ unsigned int qid, struct net_device *netdev);
+int t1_start_xmit(struct sk_buff *skb, struct net_device *dev);
+void t1_set_vlan_accel(struct adapter *adapter, int on_off);
+void t1_sge_start(struct sge *);
+void t1_sge_stop(struct sge *);
+int t1_sge_intr_error_handler(struct sge *);
+void t1_sge_intr_enable(struct sge *);
+void t1_sge_intr_disable(struct sge *);
+void t1_sge_intr_clear(struct sge *);
+const struct sge_intr_counts *t1_sge_get_intr_counts(struct sge *sge);
+const struct sge_port_stats *t1_sge_get_port_stats(struct sge *sge, int port);
+
+#endif /* _CXGB_SGE_H_ */
diff --git a/drivers/net/chelsio/subr.c b/drivers/net/chelsio/subr.c
new file mode 100644
index 00000000000..1ebb5d149ae
--- /dev/null
+++ b/drivers/net/chelsio/subr.c
@@ -0,0 +1,812 @@
+/*****************************************************************************
+ * *
+ * File: subr.c *
+ * $Revision: 1.27 $ *
+ * $Date: 2005/06/22 01:08:36 $ *
+ * Description: *
+ * Various subroutines (intr,pio,etc.) used by Chelsio 10G Ethernet driver. *
+ * part of the Chelsio 10Gb Ethernet Driver. *
+ * *
+ * This program is free software; you can redistribute it and/or modify *
+ * it under the terms of the GNU General Public License, version 2, as *
+ * published by the Free Software Foundation. *
+ * *
+ * You should have received a copy of the GNU General Public License along *
+ * with this program; if not, write to the Free Software Foundation, Inc., *
+ * 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. *
+ * *
+ * THIS SOFTWARE IS PROVIDED ``AS IS'' AND WITHOUT ANY EXPRESS OR IMPLIED *
+ * WARRANTIES, INCLUDING, WITHOUT LIMITATION, THE IMPLIED WARRANTIES OF *
+ * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. *
+ * *
+ * http://www.chelsio.com *
+ * *
+ * Copyright (c) 2003 - 2005 Chelsio Communications, Inc. *
+ * All rights reserved. *
+ * *
+ * Maintainers: maintainers@chelsio.com *
+ * *
+ * Authors: Dimitrios Michailidis <dm@chelsio.com> *
+ * Tina Yang <tainay@chelsio.com> *
+ * Felix Marti <felix@chelsio.com> *
+ * Scott Bardone <sbardone@chelsio.com> *
+ * Kurt Ottaway <kottaway@chelsio.com> *
+ * Frank DiMambro <frank@chelsio.com> *
+ * *
+ * History: *
+ * *
+ ****************************************************************************/
+
+#include "common.h"
+#include "elmer0.h"
+#include "regs.h"
+#include "gmac.h"
+#include "cphy.h"
+#include "sge.h"
+#include "espi.h"
+
+/**
+ * t1_wait_op_done - wait until an operation is completed
+ * @adapter: the adapter performing the operation
+ * @reg: the register to check for completion
+ * @mask: a single-bit field within @reg that indicates completion
+ * @polarity: the value of the field when the operation is completed
+ * @attempts: number of check iterations
+ * @delay: delay in usecs between iterations
+ *
+ * Wait until an operation is completed by checking a bit in a register
+ * up to @attempts times. Returns %0 if the operation completes and %1
+ * otherwise.
+ */
+static int t1_wait_op_done(adapter_t *adapter, int reg, u32 mask, int polarity,
+ int attempts, int delay)
+{
+ while (1) {
+ u32 val = readl(adapter->regs + reg) & mask;
+
+ if (!!val == polarity)
+ return 0;
+ if (--attempts == 0)
+ return 1;
+ if (delay)
+ udelay(delay);
+ }
+}
+
+#define TPI_ATTEMPTS 50
+
+/*
+ * Write a register over the TPI interface (unlocked and locked versions).
+ */
+static int __t1_tpi_write(adapter_t *adapter, u32 addr, u32 value)
+{
+ int tpi_busy;
+
+ writel(addr, adapter->regs + A_TPI_ADDR);
+ writel(value, adapter->regs + A_TPI_WR_DATA);
+ writel(F_TPIWR, adapter->regs + A_TPI_CSR);
+
+ tpi_busy = t1_wait_op_done(adapter, A_TPI_CSR, F_TPIRDY, 1,
+ TPI_ATTEMPTS, 3);
+ if (tpi_busy)
+ CH_ALERT("%s: TPI write to 0x%x failed\n",
+ adapter->name, addr);
+ return tpi_busy;
+}
+
+int t1_tpi_write(adapter_t *adapter, u32 addr, u32 value)
+{
+ int ret;
+
+ spin_lock(&(adapter)->tpi_lock);
+ ret = __t1_tpi_write(adapter, addr, value);
+ spin_unlock(&(adapter)->tpi_lock);
+ return ret;
+}
+
+/*
+ * Read a register over the TPI interface (unlocked and locked versions).
+ */
+static int __t1_tpi_read(adapter_t *adapter, u32 addr, u32 *valp)
+{
+ int tpi_busy;
+
+ writel(addr, adapter->regs + A_TPI_ADDR);
+ writel(0, adapter->regs + A_TPI_CSR);
+
+ tpi_busy = t1_wait_op_done(adapter, A_TPI_CSR, F_TPIRDY, 1,
+ TPI_ATTEMPTS, 3);
+ if (tpi_busy)
+ CH_ALERT("%s: TPI read from 0x%x failed\n",
+ adapter->name, addr);
+ else
+ *valp = readl(adapter->regs + A_TPI_RD_DATA);
+ return tpi_busy;
+}
+
+int t1_tpi_read(adapter_t *adapter, u32 addr, u32 *valp)
+{
+ int ret;
+
+ spin_lock(&(adapter)->tpi_lock);
+ ret = __t1_tpi_read(adapter, addr, valp);
+ spin_unlock(&(adapter)->tpi_lock);
+ return ret;
+}
+
+/*
+ * Called when a port's link settings change to propagate the new values to the
+ * associated PHY and MAC. After performing the common tasks it invokes an
+ * OS-specific handler.
+ */
+/* static */ void link_changed(adapter_t *adapter, int port_id)
+{
+ int link_ok, speed, duplex, fc;
+ struct cphy *phy = adapter->port[port_id].phy;
+ struct link_config *lc = &adapter->port[port_id].link_config;
+
+ phy->ops->get_link_status(phy, &link_ok, &speed, &duplex, &fc);
+
+ lc->speed = speed < 0 ? SPEED_INVALID : speed;
+ lc->duplex = duplex < 0 ? DUPLEX_INVALID : duplex;
+ if (!(lc->requested_fc & PAUSE_AUTONEG))
+ fc = lc->requested_fc & (PAUSE_RX | PAUSE_TX);
+
+ if (link_ok && speed >= 0 && lc->autoneg == AUTONEG_ENABLE) {
+ /* Set MAC speed, duplex, and flow control to match PHY. */
+ struct cmac *mac = adapter->port[port_id].mac;
+
+ mac->ops->set_speed_duplex_fc(mac, speed, duplex, fc);
+ lc->fc = (unsigned char)fc;
+ }
+ t1_link_changed(adapter, port_id, link_ok, speed, duplex, fc);
+}
+
+static int t1_pci_intr_handler(adapter_t *adapter)
+{
+ u32 pcix_cause;
+
+ pci_read_config_dword(adapter->pdev, A_PCICFG_INTR_CAUSE, &pcix_cause);
+
+ if (pcix_cause) {
+ pci_write_config_dword(adapter->pdev, A_PCICFG_INTR_CAUSE,
+ pcix_cause);
+ t1_fatal_err(adapter); /* PCI errors are fatal */
+ }
+ return 0;
+}
+
+
+/*
+ * Wait until Elmer's MI1 interface is ready for new operations.
+ */
+static int mi1_wait_until_ready(adapter_t *adapter, int mi1_reg)
+{
+ int attempts = 100, busy;
+
+ do {
+ u32 val;
+
+ __t1_tpi_read(adapter, mi1_reg, &val);
+ busy = val & F_MI1_OP_BUSY;
+ if (busy)
+ udelay(10);
+ } while (busy && --attempts);
+ if (busy)
+ CH_ALERT("%s: MDIO operation timed out\n",
+ adapter->name);
+ return busy;
+}
+
+/*
+ * MI1 MDIO initialization.
+ */
+static void mi1_mdio_init(adapter_t *adapter, const struct board_info *bi)
+{
+ u32 clkdiv = bi->clock_elmer0 / (2 * bi->mdio_mdc) - 1;
+ u32 val = F_MI1_PREAMBLE_ENABLE | V_MI1_MDI_INVERT(bi->mdio_mdiinv) |
+ V_MI1_MDI_ENABLE(bi->mdio_mdien) | V_MI1_CLK_DIV(clkdiv);
+
+ if (!(bi->caps & SUPPORTED_10000baseT_Full))
+ val |= V_MI1_SOF(1);
+ t1_tpi_write(adapter, A_ELMER0_PORT0_MI1_CFG, val);
+}
+
+static int mi1_mdio_ext_read(adapter_t *adapter, int phy_addr, int mmd_addr,
+ int reg_addr, unsigned int *valp)
+{
+ u32 addr = V_MI1_REG_ADDR(mmd_addr) | V_MI1_PHY_ADDR(phy_addr);
+
+ spin_lock(&(adapter)->tpi_lock);
+
+ /* Write the address we want. */
+ __t1_tpi_write(adapter, A_ELMER0_PORT0_MI1_ADDR, addr);
+ __t1_tpi_write(adapter, A_ELMER0_PORT0_MI1_DATA, reg_addr);
+ __t1_tpi_write(adapter, A_ELMER0_PORT0_MI1_OP,
+ MI1_OP_INDIRECT_ADDRESS);
+ mi1_wait_until_ready(adapter, A_ELMER0_PORT0_MI1_OP);
+
+ /* Write the operation we want. */
+ __t1_tpi_write(adapter, A_ELMER0_PORT0_MI1_OP, MI1_OP_INDIRECT_READ);
+ mi1_wait_until_ready(adapter, A_ELMER0_PORT0_MI1_OP);
+
+ /* Read the data. */
+ __t1_tpi_read(adapter, A_ELMER0_PORT0_MI1_DATA, valp);
+ spin_unlock(&(adapter)->tpi_lock);
+ return 0;
+}
+
+static int mi1_mdio_ext_write(adapter_t *adapter, int phy_addr, int mmd_addr,
+ int reg_addr, unsigned int val)
+{
+ u32 addr = V_MI1_REG_ADDR(mmd_addr) | V_MI1_PHY_ADDR(phy_addr);
+
+ spin_lock(&(adapter)->tpi_lock);
+
+ /* Write the address we want. */
+ __t1_tpi_write(adapter, A_ELMER0_PORT0_MI1_ADDR, addr);
+ __t1_tpi_write(adapter, A_ELMER0_PORT0_MI1_DATA, reg_addr);
+ __t1_tpi_write(adapter, A_ELMER0_PORT0_MI1_OP,
+ MI1_OP_INDIRECT_ADDRESS);
+ mi1_wait_until_ready(adapter, A_ELMER0_PORT0_MI1_OP);
+
+ /* Write the data. */
+ __t1_tpi_write(adapter, A_ELMER0_PORT0_MI1_DATA, val);
+ __t1_tpi_write(adapter, A_ELMER0_PORT0_MI1_OP, MI1_OP_INDIRECT_WRITE);
+ mi1_wait_until_ready(adapter, A_ELMER0_PORT0_MI1_OP);
+ spin_unlock(&(adapter)->tpi_lock);
+ return 0;
+}
+
+static struct mdio_ops mi1_mdio_ext_ops = {
+ mi1_mdio_init,
+ mi1_mdio_ext_read,
+ mi1_mdio_ext_write
+};
+
+enum {
+ CH_BRD_N110_1F,
+ CH_BRD_N210_1F,
+};
+
+static struct board_info t1_board[] = {
+
+{ CHBT_BOARD_N110, 1/*ports#*/,
+ SUPPORTED_10000baseT_Full | SUPPORTED_FIBRE /*caps*/, CHBT_TERM_T1,
+ CHBT_MAC_PM3393, CHBT_PHY_88X2010,
+ 125000000/*clk-core*/, 0/*clk-mc3*/, 0/*clk-mc4*/,
+ 1/*espi-ports*/, 0/*clk-cspi*/, 44/*clk-elmer0*/, 0/*mdien*/,
+ 0/*mdiinv*/, 1/*mdc*/, 0/*phybaseaddr*/, &t1_pm3393_ops,
+ &t1_mv88x201x_ops, &mi1_mdio_ext_ops,
+ "Chelsio N110 1x10GBaseX NIC" },
+
+{ CHBT_BOARD_N210, 1/*ports#*/,
+ SUPPORTED_10000baseT_Full | SUPPORTED_FIBRE /*caps*/, CHBT_TERM_T2,
+ CHBT_MAC_PM3393, CHBT_PHY_88X2010,
+ 125000000/*clk-core*/, 0/*clk-mc3*/, 0/*clk-mc4*/,
+ 1/*espi-ports*/, 0/*clk-cspi*/, 44/*clk-elmer0*/, 0/*mdien*/,
+ 0/*mdiinv*/, 1/*mdc*/, 0/*phybaseaddr*/, &t1_pm3393_ops,
+ &t1_mv88x201x_ops, &mi1_mdio_ext_ops,
+ "Chelsio N210 1x10GBaseX NIC" },
+
+};
+
+struct pci_device_id t1_pci_tbl[] = {
+ CH_DEVICE(7, 0, CH_BRD_N110_1F),
+ CH_DEVICE(10, 1, CH_BRD_N210_1F),
+ { 0, }
+};
+
+MODULE_DEVICE_TABLE(pci, t1_pci_tbl);
+
+/*
+ * Return the board_info structure with a given index. Out-of-range indices
+ * return NULL.
+ */
+const struct board_info *t1_get_board_info(unsigned int board_id)
+{
+ return board_id < ARRAY_SIZE(t1_board) ? &t1_board[board_id] : NULL;
+}
+
+struct chelsio_vpd_t {
+ u32 format_version;
+ u8 serial_number[16];
+ u8 mac_base_address[6];
+ u8 pad[2]; /* make multiple-of-4 size requirement explicit */
+};
+
+#define EEPROMSIZE (8 * 1024)
+#define EEPROM_MAX_POLL 4
+
+/*
+ * Read SEEPROM. A zero is written to the flag register when the addres is
+ * written to the Control register. The hardware device will set the flag to a
+ * one when 4B have been transferred to the Data register.
+ */
+int t1_seeprom_read(adapter_t *adapter, u32 addr, u32 *data)
+{
+ int i = EEPROM_MAX_POLL;
+ u16 val;
+
+ if (addr >= EEPROMSIZE || (addr & 3))
+ return -EINVAL;
+
+ pci_write_config_word(adapter->pdev, A_PCICFG_VPD_ADDR, (u16)addr);
+ do {
+ udelay(50);
+ pci_read_config_word(adapter->pdev, A_PCICFG_VPD_ADDR, &val);
+ } while (!(val & F_VPD_OP_FLAG) && --i);
+
+ if (!(val & F_VPD_OP_FLAG)) {
+ CH_ERR("%s: reading EEPROM address 0x%x failed\n",
+ adapter->name, addr);
+ return -EIO;
+ }
+ pci_read_config_dword(adapter->pdev, A_PCICFG_VPD_DATA, data);
+ *data = le32_to_cpu(*data);
+ return 0;
+}
+
+static int t1_eeprom_vpd_get(adapter_t *adapter, struct chelsio_vpd_t *vpd)
+{
+ int addr, ret = 0;
+
+ for (addr = 0; !ret && addr < sizeof(*vpd); addr += sizeof(u32))
+ ret = t1_seeprom_read(adapter, addr,
+ (u32 *)((u8 *)vpd + addr));
+
+ return ret;
+}
+
+/*
+ * Read a port's MAC address from the VPD ROM.
+ */
+static int vpd_macaddress_get(adapter_t *adapter, int index, u8 mac_addr[])
+{
+ struct chelsio_vpd_t vpd;
+
+ if (t1_eeprom_vpd_get(adapter, &vpd))
+ return 1;
+ memcpy(mac_addr, vpd.mac_base_address, 5);
+ mac_addr[5] = vpd.mac_base_address[5] + index;
+ return 0;
+}
+
+/*
+ * Set up the MAC/PHY according to the requested link settings.
+ *
+ * If the PHY can auto-negotiate first decide what to advertise, then
+ * enable/disable auto-negotiation as desired and reset.
+ *
+ * If the PHY does not auto-negotiate we just reset it.
+ *
+ * If auto-negotiation is off set the MAC to the proper speed/duplex/FC,
+ * otherwise do it later based on the outcome of auto-negotiation.
+ */
+int t1_link_start(struct cphy *phy, struct cmac *mac, struct link_config *lc)
+{
+ unsigned int fc = lc->requested_fc & (PAUSE_RX | PAUSE_TX);
+
+ if (lc->supported & SUPPORTED_Autoneg) {
+ lc->advertising &= ~(ADVERTISED_ASYM_PAUSE | ADVERTISED_PAUSE);
+ if (fc) {
+ lc->advertising |= ADVERTISED_ASYM_PAUSE;
+ if (fc == (PAUSE_RX | PAUSE_TX))
+ lc->advertising |= ADVERTISED_PAUSE;
+ }
+ phy->ops->advertise(phy, lc->advertising);
+
+ if (lc->autoneg == AUTONEG_DISABLE) {
+ lc->speed = lc->requested_speed;
+ lc->duplex = lc->requested_duplex;
+ lc->fc = (unsigned char)fc;
+ mac->ops->set_speed_duplex_fc(mac, lc->speed,
+ lc->duplex, fc);
+ /* Also disables autoneg */
+ phy->ops->set_speed_duplex(phy, lc->speed, lc->duplex);
+ phy->ops->reset(phy, 0);
+ } else
+ phy->ops->autoneg_enable(phy); /* also resets PHY */
+ } else {
+ mac->ops->set_speed_duplex_fc(mac, -1, -1, fc);
+ lc->fc = (unsigned char)fc;
+ phy->ops->reset(phy, 0);
+ }
+ return 0;
+}
+
+/*
+ * External interrupt handler for boards using elmer0.
+ */
+int elmer0_ext_intr_handler(adapter_t *adapter)
+{
+ struct cphy *phy;
+ int phy_cause;
+ u32 cause;
+
+ t1_tpi_read(adapter, A_ELMER0_INT_CAUSE, &cause);
+
+ switch (board_info(adapter)->board) {
+ case CHBT_BOARD_N210:
+ case CHBT_BOARD_N110:
+ if (cause & ELMER0_GP_BIT6) { /* Marvell 88x2010 interrupt */
+ phy = adapter->port[0].phy;
+ phy_cause = phy->ops->interrupt_handler(phy);
+ if (phy_cause & cphy_cause_link_change)
+ link_changed(adapter, 0);
+ }
+ break;
+ }
+ t1_tpi_write(adapter, A_ELMER0_INT_CAUSE, cause);
+ return 0;
+}
+
+/* Enables all interrupts. */
+void t1_interrupts_enable(adapter_t *adapter)
+{
+ unsigned int i;
+ u32 pl_intr;
+
+ adapter->slow_intr_mask = F_PL_INTR_SGE_ERR;
+
+ t1_sge_intr_enable(adapter->sge);
+ if (adapter->espi) {
+ adapter->slow_intr_mask |= F_PL_INTR_ESPI;
+ t1_espi_intr_enable(adapter->espi);
+ }
+
+ /* Enable MAC/PHY interrupts for each port. */
+ for_each_port(adapter, i) {
+ adapter->port[i].mac->ops->interrupt_enable(adapter->port[i].mac);
+ adapter->port[i].phy->ops->interrupt_enable(adapter->port[i].phy);
+ }
+
+ /* Enable PCIX & external chip interrupts on ASIC boards. */
+ pl_intr = readl(adapter->regs + A_PL_ENABLE);
+
+ /* PCI-X interrupts */
+ pci_write_config_dword(adapter->pdev, A_PCICFG_INTR_ENABLE,
+ 0xffffffff);
+
+ adapter->slow_intr_mask |= F_PL_INTR_EXT | F_PL_INTR_PCIX;
+ pl_intr |= F_PL_INTR_EXT | F_PL_INTR_PCIX;
+ writel(pl_intr, adapter->regs + A_PL_ENABLE);
+}
+
+/* Disables all interrupts. */
+void t1_interrupts_disable(adapter_t* adapter)
+{
+ unsigned int i;
+
+ t1_sge_intr_disable(adapter->sge);
+ if (adapter->espi)
+ t1_espi_intr_disable(adapter->espi);
+
+ /* Disable MAC/PHY interrupts for each port. */
+ for_each_port(adapter, i) {
+ adapter->port[i].mac->ops->interrupt_disable(adapter->port[i].mac);
+ adapter->port[i].phy->ops->interrupt_disable(adapter->port[i].phy);
+ }
+
+ /* Disable PCIX & external chip interrupts. */
+ writel(0, adapter->regs + A_PL_ENABLE);
+
+ /* PCI-X interrupts */
+ pci_write_config_dword(adapter->pdev, A_PCICFG_INTR_ENABLE, 0);
+
+ adapter->slow_intr_mask = 0;
+}
+
+/* Clears all interrupts */
+void t1_interrupts_clear(adapter_t* adapter)
+{
+ unsigned int i;
+ u32 pl_intr;
+
+
+ t1_sge_intr_clear(adapter->sge);
+ if (adapter->espi)
+ t1_espi_intr_clear(adapter->espi);
+
+ /* Clear MAC/PHY interrupts for each port. */
+ for_each_port(adapter, i) {
+ adapter->port[i].mac->ops->interrupt_clear(adapter->port[i].mac);
+ adapter->port[i].phy->ops->interrupt_clear(adapter->port[i].phy);
+ }
+
+ /* Enable interrupts for external devices. */
+ pl_intr = readl(adapter->regs + A_PL_CAUSE);
+
+ writel(pl_intr | F_PL_INTR_EXT | F_PL_INTR_PCIX,
+ adapter->regs + A_PL_CAUSE);
+
+ /* PCI-X interrupts */
+ pci_write_config_dword(adapter->pdev, A_PCICFG_INTR_CAUSE, 0xffffffff);
+}
+
+/*
+ * Slow path interrupt handler for ASICs.
+ */
+int t1_slow_intr_handler(adapter_t *adapter)
+{
+ u32 cause = readl(adapter->regs + A_PL_CAUSE);
+
+ cause &= adapter->slow_intr_mask;
+ if (!cause)
+ return 0;
+ if (cause & F_PL_INTR_SGE_ERR)
+ t1_sge_intr_error_handler(adapter->sge);
+ if (cause & F_PL_INTR_ESPI)
+ t1_espi_intr_handler(adapter->espi);
+ if (cause & F_PL_INTR_PCIX)
+ t1_pci_intr_handler(adapter);
+ if (cause & F_PL_INTR_EXT)
+ t1_elmer0_ext_intr(adapter);
+
+ /* Clear the interrupts just processed. */
+ writel(cause, adapter->regs + A_PL_CAUSE);
+ (void)readl(adapter->regs + A_PL_CAUSE); /* flush writes */
+ return 1;
+}
+
+/* Pause deadlock avoidance parameters */
+#define DROP_MSEC 16
+#define DROP_PKTS_CNT 1
+
+static void set_csum_offload(adapter_t *adapter, u32 csum_bit, int enable)
+{
+ u32 val = readl(adapter->regs + A_TP_GLOBAL_CONFIG);
+
+ if (enable)
+ val |= csum_bit;
+ else
+ val &= ~csum_bit;
+ writel(val, adapter->regs + A_TP_GLOBAL_CONFIG);
+}
+
+void t1_tp_set_ip_checksum_offload(adapter_t *adapter, int enable)
+{
+ set_csum_offload(adapter, F_IP_CSUM, enable);
+}
+
+void t1_tp_set_udp_checksum_offload(adapter_t *adapter, int enable)
+{
+ set_csum_offload(adapter, F_UDP_CSUM, enable);
+}
+
+void t1_tp_set_tcp_checksum_offload(adapter_t *adapter, int enable)
+{
+ set_csum_offload(adapter, F_TCP_CSUM, enable);
+}
+
+static void t1_tp_reset(adapter_t *adapter, unsigned int tp_clk)
+{
+ u32 val;
+
+ val = F_TP_IN_CSPI_CPL | F_TP_IN_CSPI_CHECK_IP_CSUM |
+ F_TP_IN_CSPI_CHECK_TCP_CSUM | F_TP_IN_ESPI_ETHERNET;
+ val |= F_TP_IN_ESPI_CHECK_IP_CSUM |
+ F_TP_IN_ESPI_CHECK_TCP_CSUM;
+ writel(val, adapter->regs + A_TP_IN_CONFIG);
+ writel(F_TP_OUT_CSPI_CPL |
+ F_TP_OUT_ESPI_ETHERNET |
+ F_TP_OUT_ESPI_GENERATE_IP_CSUM |
+ F_TP_OUT_ESPI_GENERATE_TCP_CSUM,
+ adapter->regs + A_TP_OUT_CONFIG);
+
+ val = readl(adapter->regs + A_TP_GLOBAL_CONFIG);
+ val &= ~(F_IP_CSUM | F_UDP_CSUM | F_TCP_CSUM);
+ writel(val, adapter->regs + A_TP_GLOBAL_CONFIG);
+
+ /*
+ * Enable pause frame deadlock prevention.
+ */
+ if (is_T2(adapter)) {
+ u32 drop_ticks = DROP_MSEC * (tp_clk / 1000);
+
+ writel(F_ENABLE_TX_DROP | F_ENABLE_TX_ERROR |
+ V_DROP_TICKS_CNT(drop_ticks) |
+ V_NUM_PKTS_DROPPED(DROP_PKTS_CNT),
+ adapter->regs + A_TP_TX_DROP_CONFIG);
+ }
+
+ writel(F_TP_RESET, adapter->regs + A_TP_RESET);
+}
+
+int __devinit t1_get_board_rev(adapter_t *adapter, const struct board_info *bi,
+ struct adapter_params *p)
+{
+ p->chip_version = bi->chip_term;
+ if (p->chip_version == CHBT_TERM_T1 ||
+ p->chip_version == CHBT_TERM_T2) {
+ u32 val = readl(adapter->regs + A_TP_PC_CONFIG);
+
+ val = G_TP_PC_REV(val);
+ if (val == 2)
+ p->chip_revision = TERM_T1B;
+ else if (val == 3)
+ p->chip_revision = TERM_T2;
+ else
+ return -1;
+ } else
+ return -1;
+ return 0;
+}
+
+/*
+ * Enable board components other than the Chelsio chip, such as external MAC
+ * and PHY.
+ */
+static int board_init(adapter_t *adapter, const struct board_info *bi)
+{
+ switch (bi->board) {
+ case CHBT_BOARD_N110:
+ case CHBT_BOARD_N210:
+ writel(V_TPIPAR(0xf), adapter->regs + A_TPI_PAR);
+ t1_tpi_write(adapter, A_ELMER0_GPO, 0x800);
+ break;
+ }
+ return 0;
+}
+
+/*
+ * Initialize and configure the Terminator HW modules. Note that external
+ * MAC and PHYs are initialized separately.
+ */
+int t1_init_hw_modules(adapter_t *adapter)
+{
+ int err = -EIO;
+ const struct board_info *bi = board_info(adapter);
+
+ if (!bi->clock_mc4) {
+ u32 val = readl(adapter->regs + A_MC4_CFG);
+
+ writel(val | F_READY | F_MC4_SLOW, adapter->regs + A_MC4_CFG);
+ writel(F_M_BUS_ENABLE | F_TCAM_RESET,
+ adapter->regs + A_MC5_CONFIG);
+ }
+
+ if (adapter->espi && t1_espi_init(adapter->espi, bi->chip_mac,
+ bi->espi_nports))
+ goto out_err;
+
+ t1_tp_reset(adapter, bi->clock_core);
+
+ err = t1_sge_configure(adapter->sge, &adapter->params.sge);
+ if (err)
+ goto out_err;
+
+ err = 0;
+ out_err:
+ return err;
+}
+
+/*
+ * Determine a card's PCI mode.
+ */
+static void __devinit get_pci_mode(adapter_t *adapter, struct chelsio_pci_params *p)
+{
+ static unsigned short speed_map[] = { 33, 66, 100, 133 };
+ u32 pci_mode;
+
+ pci_read_config_dword(adapter->pdev, A_PCICFG_MODE, &pci_mode);
+ p->speed = speed_map[G_PCI_MODE_CLK(pci_mode)];
+ p->width = (pci_mode & F_PCI_MODE_64BIT) ? 64 : 32;
+ p->is_pcix = (pci_mode & F_PCI_MODE_PCIX) != 0;
+}
+
+/*
+ * Release the structures holding the SW per-Terminator-HW-module state.
+ */
+void t1_free_sw_modules(adapter_t *adapter)
+{
+ unsigned int i;
+
+ for_each_port(adapter, i) {
+ struct cmac *mac = adapter->port[i].mac;
+ struct cphy *phy = adapter->port[i].phy;
+
+ if (mac)
+ mac->ops->destroy(mac);
+ if (phy)
+ phy->ops->destroy(phy);
+ }
+
+ if (adapter->sge)
+ t1_sge_destroy(adapter->sge);
+ if (adapter->espi)
+ t1_espi_destroy(adapter->espi);
+}
+
+static void __devinit init_link_config(struct link_config *lc,
+ const struct board_info *bi)
+{
+ lc->supported = bi->caps;
+ lc->requested_speed = lc->speed = SPEED_INVALID;
+ lc->requested_duplex = lc->duplex = DUPLEX_INVALID;
+ lc->requested_fc = lc->fc = PAUSE_RX | PAUSE_TX;
+ if (lc->supported & SUPPORTED_Autoneg) {
+ lc->advertising = lc->supported;
+ lc->autoneg = AUTONEG_ENABLE;
+ lc->requested_fc |= PAUSE_AUTONEG;
+ } else {
+ lc->advertising = 0;
+ lc->autoneg = AUTONEG_DISABLE;
+ }
+}
+
+
+/*
+ * Allocate and initialize the data structures that hold the SW state of
+ * the Terminator HW modules.
+ */
+int __devinit t1_init_sw_modules(adapter_t *adapter,
+ const struct board_info *bi)
+{
+ unsigned int i;
+
+ adapter->params.brd_info = bi;
+ adapter->params.nports = bi->port_number;
+ adapter->params.stats_update_period = bi->gmac->stats_update_period;
+
+ adapter->sge = t1_sge_create(adapter, &adapter->params.sge);
+ if (!adapter->sge) {
+ CH_ERR("%s: SGE initialization failed\n",
+ adapter->name);
+ goto error;
+ }
+
+ if (bi->espi_nports && !(adapter->espi = t1_espi_create(adapter))) {
+ CH_ERR("%s: ESPI initialization failed\n",
+ adapter->name);
+ goto error;
+ }
+
+ board_init(adapter, bi);
+ bi->mdio_ops->init(adapter, bi);
+ if (bi->gphy->reset)
+ bi->gphy->reset(adapter);
+ if (bi->gmac->reset)
+ bi->gmac->reset(adapter);
+
+ for_each_port(adapter, i) {
+ u8 hw_addr[6];
+ struct cmac *mac;
+ int phy_addr = bi->mdio_phybaseaddr + i;
+
+ adapter->port[i].phy = bi->gphy->create(adapter, phy_addr,
+ bi->mdio_ops);
+ if (!adapter->port[i].phy) {
+ CH_ERR("%s: PHY %d initialization failed\n",
+ adapter->name, i);
+ goto error;
+ }
+
+ adapter->port[i].mac = mac = bi->gmac->create(adapter, i);
+ if (!mac) {
+ CH_ERR("%s: MAC %d initialization failed\n",
+ adapter->name, i);
+ goto error;
+ }
+
+ /*
+ * Get the port's MAC addresses either from the EEPROM if one
+ * exists or the one hardcoded in the MAC.
+ */
+ if (vpd_macaddress_get(adapter, i, hw_addr)) {
+ CH_ERR("%s: could not read MAC address from VPD ROM\n",
+ adapter->port[i].dev->name);
+ goto error;
+ }
+ memcpy(adapter->port[i].dev->dev_addr, hw_addr, ETH_ALEN);
+ init_link_config(&adapter->port[i].link_config, bi);
+ }
+
+ get_pci_mode(adapter, &adapter->params.pci);
+ t1_interrupts_clear(adapter);
+ return 0;
+
+ error:
+ t1_free_sw_modules(adapter);
+ return -1;
+}
diff --git a/drivers/net/chelsio/suni1x10gexp_regs.h b/drivers/net/chelsio/suni1x10gexp_regs.h
new file mode 100644
index 00000000000..81816c2b708
--- /dev/null
+++ b/drivers/net/chelsio/suni1x10gexp_regs.h
@@ -0,0 +1,213 @@
+/*****************************************************************************
+ * *
+ * File: suni1x10gexp_regs.h *
+ * $Revision: 1.9 $ *
+ * $Date: 2005/06/22 00:17:04 $ *
+ * Description: *
+ * PMC/SIERRA (pm3393) MAC-PHY functionality. *
+ * part of the Chelsio 10Gb Ethernet Driver. *
+ * *
+ * This program is free software; you can redistribute it and/or modify *
+ * it under the terms of the GNU General Public License, version 2, as *
+ * published by the Free Software Foundation. *
+ * *
+ * You should have received a copy of the GNU General Public License along *
+ * with this program; if not, write to the Free Software Foundation, Inc., *
+ * 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. *
+ * *
+ * THIS SOFTWARE IS PROVIDED ``AS IS'' AND WITHOUT ANY EXPRESS OR IMPLIED *
+ * WARRANTIES, INCLUDING, WITHOUT LIMITATION, THE IMPLIED WARRANTIES OF *
+ * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. *
+ * *
+ * http://www.chelsio.com *
+ * *
+ * Maintainers: maintainers@chelsio.com *
+ * *
+ * Authors: PMC/SIERRA *
+ * *
+ * History: *
+ * *
+ ****************************************************************************/
+
+#ifndef _CXGB_SUNI1x10GEXP_REGS_H_
+#define _CXGB_SUNI1x10GEXP_REGS_H_
+
+/******************************************************************************/
+/** S/UNI-1x10GE-XP REGISTER ADDRESS MAP **/
+/******************************************************************************/
+/* Refer to the Register Bit Masks bellow for the naming of each register and */
+/* to the S/UNI-1x10GE-XP Data Sheet for the signification of each bit */
+/******************************************************************************/
+
+#define SUNI1x10GEXP_REG_DEVICE_STATUS 0x0004
+#define SUNI1x10GEXP_REG_MASTER_INTERRUPT_STATUS 0x000D
+#define SUNI1x10GEXP_REG_GLOBAL_INTERRUPT_ENABLE 0x000E
+#define SUNI1x10GEXP_REG_SERDES_3125_INTERRUPT_ENABLE 0x0102
+#define SUNI1x10GEXP_REG_SERDES_3125_INTERRUPT_STATUS 0x0104
+#define SUNI1x10GEXP_REG_RXXG_CONFIG_1 0x2040
+#define SUNI1x10GEXP_REG_RXXG_CONFIG_3 0x2042
+#define SUNI1x10GEXP_REG_RXXG_INTERRUPT 0x2043
+#define SUNI1x10GEXP_REG_RXXG_MAX_FRAME_LENGTH 0x2045
+#define SUNI1x10GEXP_REG_RXXG_SA_15_0 0x2046
+#define SUNI1x10GEXP_REG_RXXG_SA_31_16 0x2047
+#define SUNI1x10GEXP_REG_RXXG_SA_47_32 0x2048
+#define SUNI1x10GEXP_REG_RXXG_EXACT_MATCH_ADDR_1_LOW 0x204D
+#define SUNI1x10GEXP_REG_RXXG_EXACT_MATCH_ADDR_1_MID 0x204E
+#define SUNI1x10GEXP_REG_RXXG_EXACT_MATCH_ADDR_1_HIGH 0x204F
+#define SUNI1x10GEXP_REG_RXXG_MULTICAST_HASH_LOW 0x206A
+#define SUNI1x10GEXP_REG_RXXG_MULTICAST_HASH_MIDLOW 0x206B
+#define SUNI1x10GEXP_REG_RXXG_MULTICAST_HASH_MIDHIGH 0x206C
+#define SUNI1x10GEXP_REG_RXXG_MULTICAST_HASH_HIGH 0x206D
+#define SUNI1x10GEXP_REG_RXXG_ADDRESS_FILTER_CONTROL_0 0x206E
+#define SUNI1x10GEXP_REG_RXXG_ADDRESS_FILTER_CONTROL_2 0x2070
+#define SUNI1x10GEXP_REG_XRF_INTERRUPT_ENABLE 0x2088
+#define SUNI1x10GEXP_REG_XRF_INTERRUPT_STATUS 0x2089
+#define SUNI1x10GEXP_REG_XRF_DIAG_INTERRUPT_ENABLE 0x208B
+#define SUNI1x10GEXP_REG_XRF_DIAG_INTERRUPT_STATUS 0x208C
+#define SUNI1x10GEXP_REG_RXOAM_INTERRUPT_ENABLE 0x20C7
+#define SUNI1x10GEXP_REG_RXOAM_INTERRUPT_STATUS 0x20C8
+#define SUNI1x10GEXP_REG_MSTAT_CONTROL 0x2100
+#define SUNI1x10GEXP_REG_MSTAT_COUNTER_ROLLOVER_0 0x2101
+#define SUNI1x10GEXP_REG_MSTAT_COUNTER_ROLLOVER_1 0x2102
+#define SUNI1x10GEXP_REG_MSTAT_COUNTER_ROLLOVER_2 0x2103
+#define SUNI1x10GEXP_REG_MSTAT_COUNTER_ROLLOVER_3 0x2104
+#define SUNI1x10GEXP_REG_MSTAT_INTERRUPT_MASK_0 0x2105
+#define SUNI1x10GEXP_REG_MSTAT_INTERRUPT_MASK_1 0x2106
+#define SUNI1x10GEXP_REG_MSTAT_INTERRUPT_MASK_2 0x2107
+#define SUNI1x10GEXP_REG_MSTAT_INTERRUPT_MASK_3 0x2108
+#define SUNI1x10GEXP_REG_MSTAT_COUNTER_0_LOW 0x2110
+#define SUNI1x10GEXP_REG_MSTAT_COUNTER_1_LOW 0x2114
+#define SUNI1x10GEXP_REG_MSTAT_COUNTER_4_LOW 0x2120
+#define SUNI1x10GEXP_REG_MSTAT_COUNTER_5_LOW 0x2124
+#define SUNI1x10GEXP_REG_MSTAT_COUNTER_6_LOW 0x2128
+#define SUNI1x10GEXP_REG_MSTAT_COUNTER_8_LOW 0x2130
+#define SUNI1x10GEXP_REG_MSTAT_COUNTER_10_LOW 0x2138
+#define SUNI1x10GEXP_REG_MSTAT_COUNTER_11_LOW 0x213C
+#define SUNI1x10GEXP_REG_MSTAT_COUNTER_12_LOW 0x2140
+#define SUNI1x10GEXP_REG_MSTAT_COUNTER_13_LOW 0x2144
+#define SUNI1x10GEXP_REG_MSTAT_COUNTER_15_LOW 0x214C
+#define SUNI1x10GEXP_REG_MSTAT_COUNTER_16_LOW 0x2150
+#define SUNI1x10GEXP_REG_MSTAT_COUNTER_17_LOW 0x2154
+#define SUNI1x10GEXP_REG_MSTAT_COUNTER_18_LOW 0x2158
+#define SUNI1x10GEXP_REG_MSTAT_COUNTER_33_LOW 0x2194
+#define SUNI1x10GEXP_REG_MSTAT_COUNTER_35_LOW 0x219C
+#define SUNI1x10GEXP_REG_MSTAT_COUNTER_36_LOW 0x21A0
+#define SUNI1x10GEXP_REG_MSTAT_COUNTER_38_LOW 0x21A8
+#define SUNI1x10GEXP_REG_MSTAT_COUNTER_40_LOW 0x21B0
+#define SUNI1x10GEXP_REG_MSTAT_COUNTER_42_LOW 0x21B8
+#define SUNI1x10GEXP_REG_MSTAT_COUNTER_43_LOW 0x21BC
+#define SUNI1x10GEXP_REG_IFLX_FIFO_OVERFLOW_ENABLE 0x2209
+#define SUNI1x10GEXP_REG_IFLX_FIFO_OVERFLOW_INTERRUPT 0x220A
+#define SUNI1x10GEXP_REG_PL4ODP_INTERRUPT_MASK 0x2282
+#define SUNI1x10GEXP_REG_PL4ODP_INTERRUPT 0x2283
+#define SUNI1x10GEXP_REG_PL4IO_LOCK_DETECT_STATUS 0x2300
+#define SUNI1x10GEXP_REG_PL4IO_LOCK_DETECT_CHANGE 0x2301
+#define SUNI1x10GEXP_REG_PL4IO_LOCK_DETECT_MASK 0x2302
+#define SUNI1x10GEXP_REG_TXXG_CONFIG_1 0x3040
+#define SUNI1x10GEXP_REG_TXXG_CONFIG_3 0x3042
+#define SUNI1x10GEXP_REG_TXXG_INTERRUPT 0x3043
+#define SUNI1x10GEXP_REG_TXXG_MAX_FRAME_SIZE 0x3045
+#define SUNI1x10GEXP_REG_TXXG_SA_15_0 0x3047
+#define SUNI1x10GEXP_REG_TXXG_SA_31_16 0x3048
+#define SUNI1x10GEXP_REG_TXXG_SA_47_32 0x3049
+#define SUNI1x10GEXP_REG_XTEF_INTERRUPT_STATUS 0x3084
+#define SUNI1x10GEXP_REG_XTEF_INTERRUPT_ENABLE 0x3085
+#define SUNI1x10GEXP_REG_TXOAM_INTERRUPT_ENABLE 0x30C6
+#define SUNI1x10GEXP_REG_TXOAM_INTERRUPT_STATUS 0x30C7
+#define SUNI1x10GEXP_REG_EFLX_FIFO_OVERFLOW_ERROR_ENABLE 0x320C
+#define SUNI1x10GEXP_REG_EFLX_FIFO_OVERFLOW_ERROR_INDICATION 0x320D
+#define SUNI1x10GEXP_REG_PL4IDU_INTERRUPT_MASK 0x3282
+#define SUNI1x10GEXP_REG_PL4IDU_INTERRUPT 0x3283
+
+/******************************************************************************/
+/* -- End register offset definitions -- */
+/******************************************************************************/
+
+/******************************************************************************/
+/** SUNI-1x10GE-XP REGISTER BIT MASKS **/
+/******************************************************************************/
+
+/*----------------------------------------------------------------------------
+ * Register 0x0004: S/UNI-1x10GE-XP Device Status
+ * Bit 9 TOP_SXRA_EXPIRED
+ * Bit 8 TOP_MDIO_BUSY
+ * Bit 7 TOP_DTRB
+ * Bit 6 TOP_EXPIRED
+ * Bit 5 TOP_PAUSED
+ * Bit 4 TOP_PL4_ID_DOOL
+ * Bit 3 TOP_PL4_IS_DOOL
+ * Bit 2 TOP_PL4_ID_ROOL
+ * Bit 1 TOP_PL4_IS_ROOL
+ * Bit 0 TOP_PL4_OUT_ROOL
+ *----------------------------------------------------------------------------*/
+#define SUNI1x10GEXP_BITMSK_TOP_SXRA_EXPIRED 0x0200
+#define SUNI1x10GEXP_BITMSK_TOP_EXPIRED 0x0040
+#define SUNI1x10GEXP_BITMSK_TOP_PL4_ID_DOOL 0x0010
+#define SUNI1x10GEXP_BITMSK_TOP_PL4_IS_DOOL 0x0008
+#define SUNI1x10GEXP_BITMSK_TOP_PL4_ID_ROOL 0x0004
+#define SUNI1x10GEXP_BITMSK_TOP_PL4_IS_ROOL 0x0002
+#define SUNI1x10GEXP_BITMSK_TOP_PL4_OUT_ROOL 0x0001
+
+/*----------------------------------------------------------------------------
+ * Register 0x000E:PM3393 Global interrupt enable
+ * Bit 15 TOP_INTE
+ *----------------------------------------------------------------------------*/
+#define SUNI1x10GEXP_BITMSK_TOP_INTE 0x8000
+
+/*----------------------------------------------------------------------------
+ * Register 0x2040: RXXG Configuration 1
+ * Bit 15 RXXG_RXEN
+ * Bit 14 RXXG_ROCF
+ * Bit 13 RXXG_PAD_STRIP
+ * Bit 10 RXXG_PUREP
+ * Bit 9 RXXG_LONGP
+ * Bit 8 RXXG_PARF
+ * Bit 7 RXXG_FLCHK
+ * Bit 5 RXXG_PASS_CTRL
+ * Bit 3 RXXG_CRC_STRIP
+ * Bit 2-0 RXXG_MIFG
+ *----------------------------------------------------------------------------*/
+#define SUNI1x10GEXP_BITMSK_RXXG_RXEN 0x8000
+#define SUNI1x10GEXP_BITMSK_RXXG_PUREP 0x0400
+#define SUNI1x10GEXP_BITMSK_RXXG_FLCHK 0x0080
+#define SUNI1x10GEXP_BITMSK_RXXG_CRC_STRIP 0x0008
+
+/*----------------------------------------------------------------------------
+ * Register 0x2070: RXXG Address Filter Control 2
+ * Bit 1 RXXG_PMODE
+ * Bit 0 RXXG_MHASH_EN
+ *----------------------------------------------------------------------------*/
+#define SUNI1x10GEXP_BITMSK_RXXG_PMODE 0x0002
+#define SUNI1x10GEXP_BITMSK_RXXG_MHASH_EN 0x0001
+
+/*----------------------------------------------------------------------------
+ * Register 0x2100: MSTAT Control
+ * Bit 2 MSTAT_WRITE
+ * Bit 1 MSTAT_CLEAR
+ * Bit 0 MSTAT_SNAP
+ *----------------------------------------------------------------------------*/
+#define SUNI1x10GEXP_BITMSK_MSTAT_CLEAR 0x0002
+#define SUNI1x10GEXP_BITMSK_MSTAT_SNAP 0x0001
+
+/*----------------------------------------------------------------------------
+ * Register 0x3040: TXXG Configuration Register 1
+ * Bit 15 TXXG_TXEN0
+ * Bit 13 TXXG_HOSTPAUSE
+ * Bit 12-7 TXXG_IPGT
+ * Bit 5 TXXG_32BIT_ALIGN
+ * Bit 4 TXXG_CRCEN
+ * Bit 3 TXXG_FCTX
+ * Bit 2 TXXG_FCRX
+ * Bit 1 TXXG_PADEN
+ * Bit 0 TXXG_SPRE
+ *----------------------------------------------------------------------------*/
+#define SUNI1x10GEXP_BITMSK_TXXG_TXEN0 0x8000
+#define SUNI1x10GEXP_BITOFF_TXXG_IPGT 7
+#define SUNI1x10GEXP_BITMSK_TXXG_32BIT_ALIGN 0x0020
+#define SUNI1x10GEXP_BITMSK_TXXG_CRCEN 0x0010
+#define SUNI1x10GEXP_BITMSK_TXXG_FCTX 0x0008
+#define SUNI1x10GEXP_BITMSK_TXXG_FCRX 0x0004
+#define SUNI1x10GEXP_BITMSK_TXXG_PADEN 0x0002
+
+#endif /* _CXGB_SUNI1x10GEXP_REGS_H_ */
+
diff --git a/drivers/net/e100.c b/drivers/net/e100.c
index d0fa2448761..25cc20e415d 100644
--- a/drivers/net/e100.c
+++ b/drivers/net/e100.c
@@ -1,7 +1,7 @@
/*******************************************************************************
- Copyright(c) 1999 - 2004 Intel Corporation. All rights reserved.
+ Copyright(c) 1999 - 2005 Intel Corporation. All rights reserved.
This program is free software; you can redistribute it and/or modify it
under the terms of the GNU General Public License as published by the Free
@@ -156,7 +156,7 @@
#define DRV_NAME "e100"
#define DRV_EXT "-NAPI"
-#define DRV_VERSION "3.4.8-k2"DRV_EXT
+#define DRV_VERSION "3.4.14-k2"DRV_EXT
#define DRV_DESCRIPTION "Intel(R) PRO/100 Network Driver"
#define DRV_COPYRIGHT "Copyright(c) 1999-2005 Intel Corporation"
#define PFX DRV_NAME ": "
@@ -785,6 +785,7 @@ static int e100_eeprom_save(struct nic *nic, u16 start, u16 count)
}
#define E100_WAIT_SCB_TIMEOUT 20000 /* we might have to wait 100ms!!! */
+#define E100_WAIT_SCB_FAST 20 /* delay like the old code */
static inline int e100_exec_cmd(struct nic *nic, u8 cmd, dma_addr_t dma_addr)
{
unsigned long flags;
@@ -798,7 +799,7 @@ static inline int e100_exec_cmd(struct nic *nic, u8 cmd, dma_addr_t dma_addr)
if(likely(!readb(&nic->csr->scb.cmd_lo)))
break;
cpu_relax();
- if(unlikely(i > (E100_WAIT_SCB_TIMEOUT >> 1)))
+ if(unlikely(i > E100_WAIT_SCB_FAST))
udelay(5);
}
if(unlikely(i == E100_WAIT_SCB_TIMEOUT)) {
@@ -902,8 +903,8 @@ static void mdio_write(struct net_device *netdev, int addr, int reg, int data)
static void e100_get_defaults(struct nic *nic)
{
- struct param_range rfds = { .min = 16, .max = 256, .count = 64 };
- struct param_range cbs = { .min = 64, .max = 256, .count = 64 };
+ struct param_range rfds = { .min = 16, .max = 256, .count = 256 };
+ struct param_range cbs = { .min = 64, .max = 256, .count = 128 };
pci_read_config_byte(nic->pdev, PCI_REVISION_ID, &nic->rev_id);
/* MAC type is encoded as rev ID; exception: ICH is treated as 82559 */
@@ -1006,25 +1007,213 @@ static void e100_configure(struct nic *nic, struct cb *cb, struct sk_buff *skb)
c[16], c[17], c[18], c[19], c[20], c[21], c[22], c[23]);
}
+/********************************************************/
+/* Micro code for 8086:1229 Rev 8 */
+/********************************************************/
+
+/* Parameter values for the D101M B-step */
+#define D101M_CPUSAVER_TIMER_DWORD 78
+#define D101M_CPUSAVER_BUNDLE_DWORD 65
+#define D101M_CPUSAVER_MIN_SIZE_DWORD 126
+
+#define D101M_B_RCVBUNDLE_UCODE \
+{\
+0x00550215, 0xFFFF0437, 0xFFFFFFFF, 0x06A70789, 0xFFFFFFFF, 0x0558FFFF, \
+0x000C0001, 0x00101312, 0x000C0008, 0x00380216, \
+0x0010009C, 0x00204056, 0x002380CC, 0x00380056, \
+0x0010009C, 0x00244C0B, 0x00000800, 0x00124818, \
+0x00380438, 0x00000000, 0x00140000, 0x00380555, \
+0x00308000, 0x00100662, 0x00100561, 0x000E0408, \
+0x00134861, 0x000C0002, 0x00103093, 0x00308000, \
+0x00100624, 0x00100561, 0x000E0408, 0x00100861, \
+0x000C007E, 0x00222C21, 0x000C0002, 0x00103093, \
+0x00380C7A, 0x00080000, 0x00103090, 0x00380C7A, \
+0x00000000, 0x00000000, 0x00000000, 0x00000000, \
+0x0010009C, 0x00244C2D, 0x00010004, 0x00041000, \
+0x003A0437, 0x00044010, 0x0038078A, 0x00000000, \
+0x00100099, 0x00206C7A, 0x0010009C, 0x00244C48, \
+0x00130824, 0x000C0001, 0x00101213, 0x00260C75, \
+0x00041000, 0x00010004, 0x00130826, 0x000C0006, \
+0x002206A8, 0x0013C926, 0x00101313, 0x003806A8, \
+0x00000000, 0x00000000, 0x00000000, 0x00000000, \
+0x00000000, 0x00000000, 0x00000000, 0x00000000, \
+0x00080600, 0x00101B10, 0x00050004, 0x00100826, \
+0x00101210, 0x00380C34, 0x00000000, 0x00000000, \
+0x0021155B, 0x00100099, 0x00206559, 0x0010009C, \
+0x00244559, 0x00130836, 0x000C0000, 0x00220C62, \
+0x000C0001, 0x00101B13, 0x00229C0E, 0x00210C0E, \
+0x00226C0E, 0x00216C0E, 0x0022FC0E, 0x00215C0E, \
+0x00214C0E, 0x00380555, 0x00010004, 0x00041000, \
+0x00278C67, 0x00040800, 0x00018100, 0x003A0437, \
+0x00130826, 0x000C0001, 0x00220559, 0x00101313, \
+0x00380559, 0x00000000, 0x00000000, 0x00000000, \
+0x00000000, 0x00000000, 0x00000000, 0x00000000, \
+0x00000000, 0x00130831, 0x0010090B, 0x00124813, \
+0x000CFF80, 0x002606AB, 0x00041000, 0x00010004, \
+0x003806A8, 0x00000000, 0x00000000, 0x00000000, \
+}
+
+/********************************************************/
+/* Micro code for 8086:1229 Rev 9 */
+/********************************************************/
+
+/* Parameter values for the D101S */
+#define D101S_CPUSAVER_TIMER_DWORD 78
+#define D101S_CPUSAVER_BUNDLE_DWORD 67
+#define D101S_CPUSAVER_MIN_SIZE_DWORD 128
+
+#define D101S_RCVBUNDLE_UCODE \
+{\
+0x00550242, 0xFFFF047E, 0xFFFFFFFF, 0x06FF0818, 0xFFFFFFFF, 0x05A6FFFF, \
+0x000C0001, 0x00101312, 0x000C0008, 0x00380243, \
+0x0010009C, 0x00204056, 0x002380D0, 0x00380056, \
+0x0010009C, 0x00244F8B, 0x00000800, 0x00124818, \
+0x0038047F, 0x00000000, 0x00140000, 0x003805A3, \
+0x00308000, 0x00100610, 0x00100561, 0x000E0408, \
+0x00134861, 0x000C0002, 0x00103093, 0x00308000, \
+0x00100624, 0x00100561, 0x000E0408, 0x00100861, \
+0x000C007E, 0x00222FA1, 0x000C0002, 0x00103093, \
+0x00380F90, 0x00080000, 0x00103090, 0x00380F90, \
+0x00000000, 0x00000000, 0x00000000, 0x00000000, \
+0x0010009C, 0x00244FAD, 0x00010004, 0x00041000, \
+0x003A047E, 0x00044010, 0x00380819, 0x00000000, \
+0x00100099, 0x00206FFD, 0x0010009A, 0x0020AFFD, \
+0x0010009C, 0x00244FC8, 0x00130824, 0x000C0001, \
+0x00101213, 0x00260FF7, 0x00041000, 0x00010004, \
+0x00130826, 0x000C0006, 0x00220700, 0x0013C926, \
+0x00101313, 0x00380700, 0x00000000, 0x00000000, \
+0x00000000, 0x00000000, 0x00000000, 0x00000000, \
+0x00080600, 0x00101B10, 0x00050004, 0x00100826, \
+0x00101210, 0x00380FB6, 0x00000000, 0x00000000, \
+0x002115A9, 0x00100099, 0x002065A7, 0x0010009A, \
+0x0020A5A7, 0x0010009C, 0x002445A7, 0x00130836, \
+0x000C0000, 0x00220FE4, 0x000C0001, 0x00101B13, \
+0x00229F8E, 0x00210F8E, 0x00226F8E, 0x00216F8E, \
+0x0022FF8E, 0x00215F8E, 0x00214F8E, 0x003805A3, \
+0x00010004, 0x00041000, 0x00278FE9, 0x00040800, \
+0x00018100, 0x003A047E, 0x00130826, 0x000C0001, \
+0x002205A7, 0x00101313, 0x003805A7, 0x00000000, \
+0x00000000, 0x00000000, 0x00000000, 0x00000000, \
+0x00000000, 0x00000000, 0x00000000, 0x00130831, \
+0x0010090B, 0x00124813, 0x000CFF80, 0x00260703, \
+0x00041000, 0x00010004, 0x00380700 \
+}
+
+/********************************************************/
+/* Micro code for the 8086:1229 Rev F/10 */
+/********************************************************/
+
+/* Parameter values for the D102 E-step */
+#define D102_E_CPUSAVER_TIMER_DWORD 42
+#define D102_E_CPUSAVER_BUNDLE_DWORD 54
+#define D102_E_CPUSAVER_MIN_SIZE_DWORD 46
+
+#define D102_E_RCVBUNDLE_UCODE \
+{\
+0x007D028F, 0x0E4204F9, 0x14ED0C85, 0x14FA14E9, 0x0EF70E36, 0x1FFF1FFF, \
+0x00E014B9, 0x00000000, 0x00000000, 0x00000000, \
+0x00E014BD, 0x00000000, 0x00000000, 0x00000000, \
+0x00E014D5, 0x00000000, 0x00000000, 0x00000000, \
+0x00000000, 0x00000000, 0x00000000, 0x00000000, \
+0x00E014C1, 0x00000000, 0x00000000, 0x00000000, \
+0x00000000, 0x00000000, 0x00000000, 0x00000000, \
+0x00000000, 0x00000000, 0x00000000, 0x00000000, \
+0x00000000, 0x00000000, 0x00000000, 0x00000000, \
+0x00E014C8, 0x00000000, 0x00000000, 0x00000000, \
+0x00200600, 0x00E014EE, 0x00000000, 0x00000000, \
+0x0030FF80, 0x00940E46, 0x00038200, 0x00102000, \
+0x00E00E43, 0x00000000, 0x00000000, 0x00000000, \
+0x00300006, 0x00E014FB, 0x00000000, 0x00000000, \
+0x00000000, 0x00000000, 0x00000000, 0x00000000, \
+0x00000000, 0x00000000, 0x00000000, 0x00000000, \
+0x00000000, 0x00000000, 0x00000000, 0x00000000, \
+0x00906E41, 0x00800E3C, 0x00E00E39, 0x00000000, \
+0x00906EFD, 0x00900EFD, 0x00E00EF8, 0x00000000, \
+0x00000000, 0x00000000, 0x00000000, 0x00000000, \
+0x00000000, 0x00000000, 0x00000000, 0x00000000, \
+0x00000000, 0x00000000, 0x00000000, 0x00000000, \
+0x00000000, 0x00000000, 0x00000000, 0x00000000, \
+0x00000000, 0x00000000, 0x00000000, 0x00000000, \
+0x00000000, 0x00000000, 0x00000000, 0x00000000, \
+0x00000000, 0x00000000, 0x00000000, 0x00000000, \
+0x00000000, 0x00000000, 0x00000000, 0x00000000, \
+0x00000000, 0x00000000, 0x00000000, 0x00000000, \
+0x00000000, 0x00000000, 0x00000000, 0x00000000, \
+0x00000000, 0x00000000, 0x00000000, 0x00000000, \
+0x00000000, 0x00000000, 0x00000000, 0x00000000, \
+0x00000000, 0x00000000, 0x00000000, 0x00000000, \
+0x00000000, 0x00000000, 0x00000000, 0x00000000, \
+}
+
static void e100_load_ucode(struct nic *nic, struct cb *cb, struct sk_buff *skb)
{
- int i;
- static const u32 ucode[UCODE_SIZE] = {
- /* NFS packets are misinterpreted as TCO packets and
- * incorrectly routed to the BMC over SMBus. This
- * microcode patch checks the fragmented IP bit in the
- * NFS/UDP header to distinguish between NFS and TCO. */
- 0x0EF70E36, 0x1FFF1FFF, 0x1FFF1FFF, 0x1FFF1FFF, 0x1FFF1FFF,
- 0x1FFF1FFF, 0x00906E41, 0x00800E3C, 0x00E00E39, 0x00000000,
- 0x00906EFD, 0x00900EFD, 0x00E00EF8,
- };
+/* *INDENT-OFF* */
+ static struct {
+ u32 ucode[UCODE_SIZE + 1];
+ u8 mac;
+ u8 timer_dword;
+ u8 bundle_dword;
+ u8 min_size_dword;
+ } ucode_opts[] = {
+ { D101M_B_RCVBUNDLE_UCODE,
+ mac_82559_D101M,
+ D101M_CPUSAVER_TIMER_DWORD,
+ D101M_CPUSAVER_BUNDLE_DWORD,
+ D101M_CPUSAVER_MIN_SIZE_DWORD },
+ { D101S_RCVBUNDLE_UCODE,
+ mac_82559_D101S,
+ D101S_CPUSAVER_TIMER_DWORD,
+ D101S_CPUSAVER_BUNDLE_DWORD,
+ D101S_CPUSAVER_MIN_SIZE_DWORD },
+ { D102_E_RCVBUNDLE_UCODE,
+ mac_82551_F,
+ D102_E_CPUSAVER_TIMER_DWORD,
+ D102_E_CPUSAVER_BUNDLE_DWORD,
+ D102_E_CPUSAVER_MIN_SIZE_DWORD },
+ { D102_E_RCVBUNDLE_UCODE,
+ mac_82551_10,
+ D102_E_CPUSAVER_TIMER_DWORD,
+ D102_E_CPUSAVER_BUNDLE_DWORD,
+ D102_E_CPUSAVER_MIN_SIZE_DWORD },
+ { {0}, 0, 0, 0, 0}
+ }, *opts;
+/* *INDENT-ON* */
+
+#define BUNDLESMALL 1
+#define BUNDLEMAX 50
+#define INTDELAY 15000
+
+ opts = ucode_opts;
+
+ /* do not load u-code for ICH devices */
+ if (nic->flags & ich)
+ return;
+
+ /* Search for ucode match against h/w rev_id */
+ while (opts->mac) {
+ if (nic->mac == opts->mac) {
+ int i;
+ u32 *ucode = opts->ucode;
+
+ /* Insert user-tunable settings */
+ ucode[opts->timer_dword] &= 0xFFFF0000;
+ ucode[opts->timer_dword] |=
+ (u16) INTDELAY;
+ ucode[opts->bundle_dword] &= 0xFFFF0000;
+ ucode[opts->bundle_dword] |= (u16) BUNDLEMAX;
+ ucode[opts->min_size_dword] &= 0xFFFF0000;
+ ucode[opts->min_size_dword] |=
+ (BUNDLESMALL) ? 0xFFFF : 0xFF80;
+
+ for(i = 0; i < UCODE_SIZE; i++)
+ cb->u.ucode[i] = cpu_to_le32(ucode[i]);
+ cb->command = cpu_to_le16(cb_ucode);
+ return;
+ }
+ opts++;
+ }
- if(nic->mac == mac_82551_F || nic->mac == mac_82551_10) {
- for(i = 0; i < UCODE_SIZE; i++)
- cb->u.ucode[i] = cpu_to_le32(ucode[i]);
- cb->command = cpu_to_le16(cb_ucode);
- } else
- cb->command = cpu_to_le16(cb_nop);
+ cb->command = cpu_to_le16(cb_nop);
}
static void e100_setup_iaaddr(struct nic *nic, struct cb *cb,
@@ -1307,14 +1496,15 @@ static inline void e100_xmit_prepare(struct nic *nic, struct cb *cb,
{
cb->command = nic->tx_command;
/* interrupt every 16 packets regardless of delay */
- if((nic->cbs_avail & ~15) == nic->cbs_avail) cb->command |= cb_i;
+ if((nic->cbs_avail & ~15) == nic->cbs_avail)
+ cb->command |= cpu_to_le16(cb_i);
cb->u.tcb.tbd_array = cb->dma_addr + offsetof(struct cb, u.tcb.tbd);
cb->u.tcb.tcb_byte_count = 0;
cb->u.tcb.threshold = nic->tx_threshold;
cb->u.tcb.tbd_count = 1;
cb->u.tcb.tbd.buf_addr = cpu_to_le32(pci_map_single(nic->pdev,
skb->data, skb->len, PCI_DMA_TODEVICE));
- // check for mapping failure?
+ /* check for mapping failure? */
cb->u.tcb.tbd.size = cpu_to_le16(skb->len);
}
@@ -1539,7 +1729,7 @@ static inline int e100_rx_indicate(struct nic *nic, struct rx *rx,
/* Don't indicate if hardware indicates errors */
nic->net_stats.rx_dropped++;
dev_kfree_skb_any(skb);
- } else if(actual_size > nic->netdev->mtu + VLAN_ETH_HLEN) {
+ } else if(actual_size > ETH_DATA_LEN + VLAN_ETH_HLEN) {
/* Don't indicate oversized frames */
nic->rx_over_length_errors++;
nic->net_stats.rx_dropped++;
@@ -1706,6 +1896,7 @@ static int e100_poll(struct net_device *netdev, int *budget)
static void e100_netpoll(struct net_device *netdev)
{
struct nic *nic = netdev_priv(netdev);
+
e100_disable_irq(nic);
e100_intr(nic->pdev->irq, netdev, NULL);
e100_tx_clean(nic);
@@ -2108,6 +2299,8 @@ static void e100_diag_test(struct net_device *netdev,
}
for(i = 0; i < E100_TEST_LEN; i++)
test->flags |= data[i] ? ETH_TEST_FL_FAILED : 0;
+
+ msleep_interruptible(4 * 1000);
}
static int e100_phys_id(struct net_device *netdev, u32 data)
diff --git a/drivers/net/e1000/e1000_main.c b/drivers/net/e1000/e1000_main.c
index b82fd15d089..9b596e0bbf9 100644
--- a/drivers/net/e1000/e1000_main.c
+++ b/drivers/net/e1000/e1000_main.c
@@ -2767,7 +2767,7 @@ e1000_clean_tx_irq(struct e1000_adapter *adapter)
" next_to_use <%x>\n"
" next_to_clean <%x>\n"
"buffer_info[next_to_clean]\n"
- " dma <%zx>\n"
+ " dma <%llx>\n"
" time_stamp <%lx>\n"
" next_to_watch <%x>\n"
" jiffies <%lx>\n"
@@ -2776,7 +2776,7 @@ e1000_clean_tx_irq(struct e1000_adapter *adapter)
E1000_READ_REG(&adapter->hw, TDT),
tx_ring->next_to_use,
i,
- tx_ring->buffer_info[i].dma,
+ (unsigned long long)tx_ring->buffer_info[i].dma,
tx_ring->buffer_info[i].time_stamp,
eop,
jiffies,
diff --git a/drivers/net/eepro100.c b/drivers/net/eepro100.c
index 1795425f512..8c62ced2c9b 100644
--- a/drivers/net/eepro100.c
+++ b/drivers/net/eepro100.c
@@ -1263,8 +1263,8 @@ speedo_init_rx_ring(struct net_device *dev)
for (i = 0; i < RX_RING_SIZE; i++) {
struct sk_buff *skb;
skb = dev_alloc_skb(PKT_BUF_SZ + sizeof(struct RxFD));
- /* XXX: do we really want to call this before the NULL check? --hch */
- rx_align(skb); /* Align IP on 16 byte boundary */
+ if (skb)
+ rx_align(skb); /* Align IP on 16 byte boundary */
sp->rx_skbuff[i] = skb;
if (skb == NULL)
break; /* OK. Just initially short of Rx bufs. */
@@ -1654,8 +1654,8 @@ static inline struct RxFD *speedo_rx_alloc(struct net_device *dev, int entry)
struct sk_buff *skb;
/* Get a fresh skbuff to replace the consumed one. */
skb = dev_alloc_skb(PKT_BUF_SZ + sizeof(struct RxFD));
- /* XXX: do we really want to call this before the NULL check? --hch */
- rx_align(skb); /* Align IP on 16 byte boundary */
+ if (skb)
+ rx_align(skb); /* Align IP on 16 byte boundary */
sp->rx_skbuff[entry] = skb;
if (skb == NULL) {
sp->rx_ringp[entry] = NULL;
diff --git a/drivers/net/forcedeth.c b/drivers/net/forcedeth.c
index 64f0f697c95..7d93948aec8 100644
--- a/drivers/net/forcedeth.c
+++ b/drivers/net/forcedeth.c
@@ -85,6 +85,16 @@
* 0.33: 16 May 2005: Support for MCP51 added.
* 0.34: 18 Jun 2005: Add DEV_NEED_LINKTIMER to all nForce nics.
* 0.35: 26 Jun 2005: Support for MCP55 added.
+ * 0.36: 28 Jun 2005: Add jumbo frame support.
+ * 0.37: 10 Jul 2005: Additional ethtool support, cleanup of pci id list
+ * 0.38: 16 Jul 2005: tx irq rewrite: Use global flags instead of
+ * per-packet flags.
+ * 0.39: 18 Jul 2005: Add 64bit descriptor support.
+ * 0.40: 19 Jul 2005: Add support for mac address change.
+ * 0.41: 30 Jul 2005: Write back original MAC in nv_close instead
+ * of nv_remove
+ * 0.42: 06 Aug 2005: Fix lack of link speed initialization
+ * in the second (and later) nv_open call
*
* Known bugs:
* We suspect that on some hardware no TX done interrupts are generated.
@@ -96,7 +106,7 @@
* DEV_NEED_TIMERIRQ will not harm you on sane hardware, only generating a few
* superfluous timer interrupts from the nic.
*/
-#define FORCEDETH_VERSION "0.35"
+#define FORCEDETH_VERSION "0.41"
#define DRV_NAME "forcedeth"
#include <linux/module.h>
@@ -131,11 +141,10 @@
* Hardware access:
*/
-#define DEV_NEED_LASTPACKET1 0x0001 /* set LASTPACKET1 in tx flags */
-#define DEV_IRQMASK_1 0x0002 /* use NVREG_IRQMASK_WANTED_1 for irq mask */
-#define DEV_IRQMASK_2 0x0004 /* use NVREG_IRQMASK_WANTED_2 for irq mask */
-#define DEV_NEED_TIMERIRQ 0x0008 /* set the timer irq flag in the irq mask */
-#define DEV_NEED_LINKTIMER 0x0010 /* poll link settings. Relies on the timer irq */
+#define DEV_NEED_TIMERIRQ 0x0001 /* set the timer irq flag in the irq mask */
+#define DEV_NEED_LINKTIMER 0x0002 /* poll link settings. Relies on the timer irq */
+#define DEV_HAS_LARGEDESC 0x0004 /* device supports jumbo frames and needs packet format 2 */
+#define DEV_HAS_HIGH_DMA 0x0008 /* device supports 64bit dma */
enum {
NvRegIrqStatus = 0x000,
@@ -146,13 +155,16 @@ enum {
#define NVREG_IRQ_RX 0x0002
#define NVREG_IRQ_RX_NOBUF 0x0004
#define NVREG_IRQ_TX_ERR 0x0008
-#define NVREG_IRQ_TX2 0x0010
+#define NVREG_IRQ_TX_OK 0x0010
#define NVREG_IRQ_TIMER 0x0020
#define NVREG_IRQ_LINK 0x0040
+#define NVREG_IRQ_TX_ERROR 0x0080
#define NVREG_IRQ_TX1 0x0100
-#define NVREG_IRQMASK_WANTED_1 0x005f
-#define NVREG_IRQMASK_WANTED_2 0x0147
-#define NVREG_IRQ_UNKNOWN (~(NVREG_IRQ_RX_ERROR|NVREG_IRQ_RX|NVREG_IRQ_RX_NOBUF|NVREG_IRQ_TX_ERR|NVREG_IRQ_TX2|NVREG_IRQ_TIMER|NVREG_IRQ_LINK|NVREG_IRQ_TX1))
+#define NVREG_IRQMASK_WANTED 0x00df
+
+#define NVREG_IRQ_UNKNOWN (~(NVREG_IRQ_RX_ERROR|NVREG_IRQ_RX|NVREG_IRQ_RX_NOBUF|NVREG_IRQ_TX_ERR| \
+ NVREG_IRQ_TX_OK|NVREG_IRQ_TIMER|NVREG_IRQ_LINK|NVREG_IRQ_TX_ERROR| \
+ NVREG_IRQ_TX1))
NvRegUnknownSetupReg6 = 0x008,
#define NVREG_UNKSETUP6_VAL 3
@@ -286,6 +298,18 @@ struct ring_desc {
u32 FlagLen;
};
+struct ring_desc_ex {
+ u32 PacketBufferHigh;
+ u32 PacketBufferLow;
+ u32 Reserved;
+ u32 FlagLen;
+};
+
+typedef union _ring_type {
+ struct ring_desc* orig;
+ struct ring_desc_ex* ex;
+} ring_type;
+
#define FLAG_MASK_V1 0xffff0000
#define FLAG_MASK_V2 0xffffc000
#define LEN_MASK_V1 (0xffffffff ^ FLAG_MASK_V1)
@@ -293,7 +317,7 @@ struct ring_desc {
#define NV_TX_LASTPACKET (1<<16)
#define NV_TX_RETRYERROR (1<<19)
-#define NV_TX_LASTPACKET1 (1<<24)
+#define NV_TX_FORCED_INTERRUPT (1<<24)
#define NV_TX_DEFERRED (1<<26)
#define NV_TX_CARRIERLOST (1<<27)
#define NV_TX_LATECOLLISION (1<<28)
@@ -303,7 +327,7 @@ struct ring_desc {
#define NV_TX2_LASTPACKET (1<<29)
#define NV_TX2_RETRYERROR (1<<18)
-#define NV_TX2_LASTPACKET1 (1<<23)
+#define NV_TX2_FORCED_INTERRUPT (1<<30)
#define NV_TX2_DEFERRED (1<<25)
#define NV_TX2_CARRIERLOST (1<<26)
#define NV_TX2_LATECOLLISION (1<<27)
@@ -379,9 +403,13 @@ struct ring_desc {
#define TX_LIMIT_START 62
/* rx/tx mac addr + type + vlan + align + slack*/
-#define RX_NIC_BUFSIZE (ETH_DATA_LEN + 64)
-/* even more slack */
-#define RX_ALLOC_BUFSIZE (ETH_DATA_LEN + 128)
+#define NV_RX_HEADERS (64)
+/* even more slack. */
+#define NV_RX_ALLOC_PAD (64)
+
+/* maximum mtu size */
+#define NV_PKTLIMIT_1 ETH_DATA_LEN /* hard limit not known */
+#define NV_PKTLIMIT_2 9100 /* Actual limit according to NVidia: 9202 */
#define OOM_REFILL (1+HZ/20)
#define POLL_WAIT (1+HZ/100)
@@ -396,6 +424,7 @@ struct ring_desc {
*/
#define DESC_VER_1 0x0
#define DESC_VER_2 (0x02100|NVREG_TXRXCTL_RXCHECK)
+#define DESC_VER_3 (0x02200|NVREG_TXRXCTL_RXCHECK)
/* PHY defines */
#define PHY_OUI_MARVELL 0x5043
@@ -468,11 +497,12 @@ struct fe_priv {
/* rx specific fields.
* Locking: Within irq hander or disable_irq+spin_lock(&np->lock);
*/
- struct ring_desc *rx_ring;
+ ring_type rx_ring;
unsigned int cur_rx, refill_rx;
struct sk_buff *rx_skbuff[RX_RING];
dma_addr_t rx_dma[RX_RING];
unsigned int rx_buf_sz;
+ unsigned int pkt_limit;
struct timer_list oom_kick;
struct timer_list nic_poll;
@@ -484,7 +514,7 @@ struct fe_priv {
/*
* tx specific fields.
*/
- struct ring_desc *tx_ring;
+ ring_type tx_ring;
unsigned int next_tx, nic_tx;
struct sk_buff *tx_skbuff[TX_RING];
dma_addr_t tx_dma[TX_RING];
@@ -519,6 +549,11 @@ static inline u32 nv_descr_getlength(struct ring_desc *prd, u32 v)
& ((v == DESC_VER_1) ? LEN_MASK_V1 : LEN_MASK_V2);
}
+static inline u32 nv_descr_getlength_ex(struct ring_desc_ex *prd, u32 v)
+{
+ return le32_to_cpu(prd->FlagLen) & LEN_MASK_V2;
+}
+
static int reg_delay(struct net_device *dev, int offset, u32 mask, u32 target,
int delay, int delaymax, const char *msg)
{
@@ -792,7 +827,7 @@ static int nv_alloc_rx(struct net_device *dev)
nr = refill_rx % RX_RING;
if (np->rx_skbuff[nr] == NULL) {
- skb = dev_alloc_skb(RX_ALLOC_BUFSIZE);
+ skb = dev_alloc_skb(np->rx_buf_sz + NV_RX_ALLOC_PAD);
if (!skb)
break;
@@ -803,9 +838,16 @@ static int nv_alloc_rx(struct net_device *dev)
}
np->rx_dma[nr] = pci_map_single(np->pci_dev, skb->data, skb->len,
PCI_DMA_FROMDEVICE);
- np->rx_ring[nr].PacketBuffer = cpu_to_le32(np->rx_dma[nr]);
- wmb();
- np->rx_ring[nr].FlagLen = cpu_to_le32(RX_NIC_BUFSIZE | NV_RX_AVAIL);
+ if (np->desc_ver == DESC_VER_1 || np->desc_ver == DESC_VER_2) {
+ np->rx_ring.orig[nr].PacketBuffer = cpu_to_le32(np->rx_dma[nr]);
+ wmb();
+ np->rx_ring.orig[nr].FlagLen = cpu_to_le32(np->rx_buf_sz | NV_RX_AVAIL);
+ } else {
+ np->rx_ring.ex[nr].PacketBufferHigh = cpu_to_le64(np->rx_dma[nr]) >> 32;
+ np->rx_ring.ex[nr].PacketBufferLow = cpu_to_le64(np->rx_dma[nr]) & 0x0FFFFFFFF;
+ wmb();
+ np->rx_ring.ex[nr].FlagLen = cpu_to_le32(np->rx_buf_sz | NV_RX2_AVAIL);
+ }
dprintk(KERN_DEBUG "%s: nv_alloc_rx: Packet %d marked as Available\n",
dev->name, refill_rx);
refill_rx++;
@@ -831,19 +873,37 @@ static void nv_do_rx_refill(unsigned long data)
enable_irq(dev->irq);
}
-static int nv_init_ring(struct net_device *dev)
+static void nv_init_rx(struct net_device *dev)
{
struct fe_priv *np = get_nvpriv(dev);
int i;
- np->next_tx = np->nic_tx = 0;
- for (i = 0; i < TX_RING; i++)
- np->tx_ring[i].FlagLen = 0;
-
np->cur_rx = RX_RING;
np->refill_rx = 0;
for (i = 0; i < RX_RING; i++)
- np->rx_ring[i].FlagLen = 0;
+ if (np->desc_ver == DESC_VER_1 || np->desc_ver == DESC_VER_2)
+ np->rx_ring.orig[i].FlagLen = 0;
+ else
+ np->rx_ring.ex[i].FlagLen = 0;
+}
+
+static void nv_init_tx(struct net_device *dev)
+{
+ struct fe_priv *np = get_nvpriv(dev);
+ int i;
+
+ np->next_tx = np->nic_tx = 0;
+ for (i = 0; i < TX_RING; i++)
+ if (np->desc_ver == DESC_VER_1 || np->desc_ver == DESC_VER_2)
+ np->tx_ring.orig[i].FlagLen = 0;
+ else
+ np->tx_ring.ex[i].FlagLen = 0;
+}
+
+static int nv_init_ring(struct net_device *dev)
+{
+ nv_init_tx(dev);
+ nv_init_rx(dev);
return nv_alloc_rx(dev);
}
@@ -852,7 +912,10 @@ static void nv_drain_tx(struct net_device *dev)
struct fe_priv *np = get_nvpriv(dev);
int i;
for (i = 0; i < TX_RING; i++) {
- np->tx_ring[i].FlagLen = 0;
+ if (np->desc_ver == DESC_VER_1 || np->desc_ver == DESC_VER_2)
+ np->tx_ring.orig[i].FlagLen = 0;
+ else
+ np->tx_ring.ex[i].FlagLen = 0;
if (np->tx_skbuff[i]) {
pci_unmap_single(np->pci_dev, np->tx_dma[i],
np->tx_skbuff[i]->len,
@@ -869,7 +932,10 @@ static void nv_drain_rx(struct net_device *dev)
struct fe_priv *np = get_nvpriv(dev);
int i;
for (i = 0; i < RX_RING; i++) {
- np->rx_ring[i].FlagLen = 0;
+ if (np->desc_ver == DESC_VER_1 || np->desc_ver == DESC_VER_2)
+ np->rx_ring.orig[i].FlagLen = 0;
+ else
+ np->rx_ring.ex[i].FlagLen = 0;
wmb();
if (np->rx_skbuff[i]) {
pci_unmap_single(np->pci_dev, np->rx_dma[i],
@@ -900,11 +966,19 @@ static int nv_start_xmit(struct sk_buff *skb, struct net_device *dev)
np->tx_dma[nr] = pci_map_single(np->pci_dev, skb->data,skb->len,
PCI_DMA_TODEVICE);
- np->tx_ring[nr].PacketBuffer = cpu_to_le32(np->tx_dma[nr]);
+ if (np->desc_ver == DESC_VER_1 || np->desc_ver == DESC_VER_2)
+ np->tx_ring.orig[nr].PacketBuffer = cpu_to_le32(np->tx_dma[nr]);
+ else {
+ np->tx_ring.ex[nr].PacketBufferHigh = cpu_to_le64(np->tx_dma[nr]) >> 32;
+ np->tx_ring.ex[nr].PacketBufferLow = cpu_to_le64(np->tx_dma[nr]) & 0x0FFFFFFFF;
+ }
spin_lock_irq(&np->lock);
wmb();
- np->tx_ring[nr].FlagLen = cpu_to_le32( (skb->len-1) | np->tx_flags );
+ if (np->desc_ver == DESC_VER_1 || np->desc_ver == DESC_VER_2)
+ np->tx_ring.orig[nr].FlagLen = cpu_to_le32( (skb->len-1) | np->tx_flags );
+ else
+ np->tx_ring.ex[nr].FlagLen = cpu_to_le32( (skb->len-1) | np->tx_flags );
dprintk(KERN_DEBUG "%s: nv_start_xmit: packet packet %d queued for transmission.\n",
dev->name, np->next_tx);
{
@@ -942,7 +1016,10 @@ static void nv_tx_done(struct net_device *dev)
while (np->nic_tx != np->next_tx) {
i = np->nic_tx % TX_RING;
- Flags = le32_to_cpu(np->tx_ring[i].FlagLen);
+ if (np->desc_ver == DESC_VER_1 || np->desc_ver == DESC_VER_2)
+ Flags = le32_to_cpu(np->tx_ring.orig[i].FlagLen);
+ else
+ Flags = le32_to_cpu(np->tx_ring.ex[i].FlagLen);
dprintk(KERN_DEBUG "%s: nv_tx_done: looking at packet %d, Flags 0x%x.\n",
dev->name, np->nic_tx, Flags);
@@ -993,9 +1070,56 @@ static void nv_tx_timeout(struct net_device *dev)
struct fe_priv *np = get_nvpriv(dev);
u8 __iomem *base = get_hwbase(dev);
- dprintk(KERN_DEBUG "%s: Got tx_timeout. irq: %08x\n", dev->name,
+ printk(KERN_INFO "%s: Got tx_timeout. irq: %08x\n", dev->name,
readl(base + NvRegIrqStatus) & NVREG_IRQSTAT_MASK);
+ {
+ int i;
+
+ printk(KERN_INFO "%s: Ring at %lx: next %d nic %d\n",
+ dev->name, (unsigned long)np->ring_addr,
+ np->next_tx, np->nic_tx);
+ printk(KERN_INFO "%s: Dumping tx registers\n", dev->name);
+ for (i=0;i<0x400;i+= 32) {
+ printk(KERN_INFO "%3x: %08x %08x %08x %08x %08x %08x %08x %08x\n",
+ i,
+ readl(base + i + 0), readl(base + i + 4),
+ readl(base + i + 8), readl(base + i + 12),
+ readl(base + i + 16), readl(base + i + 20),
+ readl(base + i + 24), readl(base + i + 28));
+ }
+ printk(KERN_INFO "%s: Dumping tx ring\n", dev->name);
+ for (i=0;i<TX_RING;i+= 4) {
+ if (np->desc_ver == DESC_VER_1 || np->desc_ver == DESC_VER_2) {
+ printk(KERN_INFO "%03x: %08x %08x // %08x %08x // %08x %08x // %08x %08x\n",
+ i,
+ le32_to_cpu(np->tx_ring.orig[i].PacketBuffer),
+ le32_to_cpu(np->tx_ring.orig[i].FlagLen),
+ le32_to_cpu(np->tx_ring.orig[i+1].PacketBuffer),
+ le32_to_cpu(np->tx_ring.orig[i+1].FlagLen),
+ le32_to_cpu(np->tx_ring.orig[i+2].PacketBuffer),
+ le32_to_cpu(np->tx_ring.orig[i+2].FlagLen),
+ le32_to_cpu(np->tx_ring.orig[i+3].PacketBuffer),
+ le32_to_cpu(np->tx_ring.orig[i+3].FlagLen));
+ } else {
+ printk(KERN_INFO "%03x: %08x %08x %08x // %08x %08x %08x // %08x %08x %08x // %08x %08x %08x\n",
+ i,
+ le32_to_cpu(np->tx_ring.ex[i].PacketBufferHigh),
+ le32_to_cpu(np->tx_ring.ex[i].PacketBufferLow),
+ le32_to_cpu(np->tx_ring.ex[i].FlagLen),
+ le32_to_cpu(np->tx_ring.ex[i+1].PacketBufferHigh),
+ le32_to_cpu(np->tx_ring.ex[i+1].PacketBufferLow),
+ le32_to_cpu(np->tx_ring.ex[i+1].FlagLen),
+ le32_to_cpu(np->tx_ring.ex[i+2].PacketBufferHigh),
+ le32_to_cpu(np->tx_ring.ex[i+2].PacketBufferLow),
+ le32_to_cpu(np->tx_ring.ex[i+2].FlagLen),
+ le32_to_cpu(np->tx_ring.ex[i+3].PacketBufferHigh),
+ le32_to_cpu(np->tx_ring.ex[i+3].PacketBufferLow),
+ le32_to_cpu(np->tx_ring.ex[i+3].FlagLen));
+ }
+ }
+ }
+
spin_lock_irq(&np->lock);
/* 1) stop tx engine */
@@ -1009,7 +1133,10 @@ static void nv_tx_timeout(struct net_device *dev)
printk(KERN_DEBUG "%s: tx_timeout: dead entries!\n", dev->name);
nv_drain_tx(dev);
np->next_tx = np->nic_tx = 0;
- writel((u32) (np->ring_addr + RX_RING*sizeof(struct ring_desc)), base + NvRegTxRingPhysAddr);
+ if (np->desc_ver == DESC_VER_1 || np->desc_ver == DESC_VER_2)
+ writel((u32) (np->ring_addr + RX_RING*sizeof(struct ring_desc)), base + NvRegTxRingPhysAddr);
+ else
+ writel((u32) (np->ring_addr + RX_RING*sizeof(struct ring_desc_ex)), base + NvRegTxRingPhysAddr);
netif_wake_queue(dev);
}
@@ -1084,8 +1211,13 @@ static void nv_rx_process(struct net_device *dev)
break; /* we scanned the whole ring - do not continue */
i = np->cur_rx % RX_RING;
- Flags = le32_to_cpu(np->rx_ring[i].FlagLen);
- len = nv_descr_getlength(&np->rx_ring[i], np->desc_ver);
+ if (np->desc_ver == DESC_VER_1 || np->desc_ver == DESC_VER_2) {
+ Flags = le32_to_cpu(np->rx_ring.orig[i].FlagLen);
+ len = nv_descr_getlength(&np->rx_ring.orig[i], np->desc_ver);
+ } else {
+ Flags = le32_to_cpu(np->rx_ring.ex[i].FlagLen);
+ len = nv_descr_getlength_ex(&np->rx_ring.ex[i], np->desc_ver);
+ }
dprintk(KERN_DEBUG "%s: nv_rx_process: looking at packet %d, Flags 0x%x.\n",
dev->name, np->cur_rx, Flags);
@@ -1207,15 +1339,133 @@ next_pkt:
}
}
+static void set_bufsize(struct net_device *dev)
+{
+ struct fe_priv *np = netdev_priv(dev);
+
+ if (dev->mtu <= ETH_DATA_LEN)
+ np->rx_buf_sz = ETH_DATA_LEN + NV_RX_HEADERS;
+ else
+ np->rx_buf_sz = dev->mtu + NV_RX_HEADERS;
+}
+
/*
* nv_change_mtu: dev->change_mtu function
* Called with dev_base_lock held for read.
*/
static int nv_change_mtu(struct net_device *dev, int new_mtu)
{
- if (new_mtu > ETH_DATA_LEN)
+ struct fe_priv *np = get_nvpriv(dev);
+ int old_mtu;
+
+ if (new_mtu < 64 || new_mtu > np->pkt_limit)
return -EINVAL;
+
+ old_mtu = dev->mtu;
dev->mtu = new_mtu;
+
+ /* return early if the buffer sizes will not change */
+ if (old_mtu <= ETH_DATA_LEN && new_mtu <= ETH_DATA_LEN)
+ return 0;
+ if (old_mtu == new_mtu)
+ return 0;
+
+ /* synchronized against open : rtnl_lock() held by caller */
+ if (netif_running(dev)) {
+ u8 *base = get_hwbase(dev);
+ /*
+ * It seems that the nic preloads valid ring entries into an
+ * internal buffer. The procedure for flushing everything is
+ * guessed, there is probably a simpler approach.
+ * Changing the MTU is a rare event, it shouldn't matter.
+ */
+ disable_irq(dev->irq);
+ spin_lock_bh(&dev->xmit_lock);
+ spin_lock(&np->lock);
+ /* stop engines */
+ nv_stop_rx(dev);
+ nv_stop_tx(dev);
+ nv_txrx_reset(dev);
+ /* drain rx queue */
+ nv_drain_rx(dev);
+ nv_drain_tx(dev);
+ /* reinit driver view of the rx queue */
+ nv_init_rx(dev);
+ nv_init_tx(dev);
+ /* alloc new rx buffers */
+ set_bufsize(dev);
+ if (nv_alloc_rx(dev)) {
+ if (!np->in_shutdown)
+ mod_timer(&np->oom_kick, jiffies + OOM_REFILL);
+ }
+ /* reinit nic view of the rx queue */
+ writel(np->rx_buf_sz, base + NvRegOffloadConfig);
+ writel((u32) np->ring_addr, base + NvRegRxRingPhysAddr);
+ if (np->desc_ver == DESC_VER_1 || np->desc_ver == DESC_VER_2)
+ writel((u32) (np->ring_addr + RX_RING*sizeof(struct ring_desc)), base + NvRegTxRingPhysAddr);
+ else
+ writel((u32) (np->ring_addr + RX_RING*sizeof(struct ring_desc_ex)), base + NvRegTxRingPhysAddr);
+ writel( ((RX_RING-1) << NVREG_RINGSZ_RXSHIFT) + ((TX_RING-1) << NVREG_RINGSZ_TXSHIFT),
+ base + NvRegRingSizes);
+ pci_push(base);
+ writel(NVREG_TXRXCTL_KICK|np->desc_ver, get_hwbase(dev) + NvRegTxRxControl);
+ pci_push(base);
+
+ /* restart rx engine */
+ nv_start_rx(dev);
+ nv_start_tx(dev);
+ spin_unlock(&np->lock);
+ spin_unlock_bh(&dev->xmit_lock);
+ enable_irq(dev->irq);
+ }
+ return 0;
+}
+
+static void nv_copy_mac_to_hw(struct net_device *dev)
+{
+ u8 *base = get_hwbase(dev);
+ u32 mac[2];
+
+ mac[0] = (dev->dev_addr[0] << 0) + (dev->dev_addr[1] << 8) +
+ (dev->dev_addr[2] << 16) + (dev->dev_addr[3] << 24);
+ mac[1] = (dev->dev_addr[4] << 0) + (dev->dev_addr[5] << 8);
+
+ writel(mac[0], base + NvRegMacAddrA);
+ writel(mac[1], base + NvRegMacAddrB);
+}
+
+/*
+ * nv_set_mac_address: dev->set_mac_address function
+ * Called with rtnl_lock() held.
+ */
+static int nv_set_mac_address(struct net_device *dev, void *addr)
+{
+ struct fe_priv *np = get_nvpriv(dev);
+ struct sockaddr *macaddr = (struct sockaddr*)addr;
+
+ if(!is_valid_ether_addr(macaddr->sa_data))
+ return -EADDRNOTAVAIL;
+
+ /* synchronized against open : rtnl_lock() held by caller */
+ memcpy(dev->dev_addr, macaddr->sa_data, ETH_ALEN);
+
+ if (netif_running(dev)) {
+ spin_lock_bh(&dev->xmit_lock);
+ spin_lock_irq(&np->lock);
+
+ /* stop rx engine */
+ nv_stop_rx(dev);
+
+ /* set mac address */
+ nv_copy_mac_to_hw(dev);
+
+ /* restart rx engine */
+ nv_start_rx(dev);
+ spin_unlock_irq(&np->lock);
+ spin_unlock_bh(&dev->xmit_lock);
+ } else {
+ nv_copy_mac_to_hw(dev);
+ }
return 0;
}
@@ -1470,7 +1720,7 @@ static irqreturn_t nv_nic_irq(int foo, void *data, struct pt_regs *regs)
if (!(events & np->irqmask))
break;
- if (events & (NVREG_IRQ_TX1|NVREG_IRQ_TX2|NVREG_IRQ_TX_ERR)) {
+ if (events & (NVREG_IRQ_TX1|NVREG_IRQ_TX_OK|NVREG_IRQ_TX_ERROR|NVREG_IRQ_TX_ERR)) {
spin_lock(&np->lock);
nv_tx_done(dev);
spin_unlock(&np->lock);
@@ -1761,6 +2011,50 @@ static int nv_set_settings(struct net_device *dev, struct ethtool_cmd *ecmd)
return 0;
}
+#define FORCEDETH_REGS_VER 1
+#define FORCEDETH_REGS_SIZE 0x400 /* 256 32-bit registers */
+
+static int nv_get_regs_len(struct net_device *dev)
+{
+ return FORCEDETH_REGS_SIZE;
+}
+
+static void nv_get_regs(struct net_device *dev, struct ethtool_regs *regs, void *buf)
+{
+ struct fe_priv *np = get_nvpriv(dev);
+ u8 __iomem *base = get_hwbase(dev);
+ u32 *rbuf = buf;
+ int i;
+
+ regs->version = FORCEDETH_REGS_VER;
+ spin_lock_irq(&np->lock);
+ for (i=0;i<FORCEDETH_REGS_SIZE/sizeof(u32);i++)
+ rbuf[i] = readl(base + i*sizeof(u32));
+ spin_unlock_irq(&np->lock);
+}
+
+static int nv_nway_reset(struct net_device *dev)
+{
+ struct fe_priv *np = get_nvpriv(dev);
+ int ret;
+
+ spin_lock_irq(&np->lock);
+ if (np->autoneg) {
+ int bmcr;
+
+ bmcr = mii_rw(dev, np->phyaddr, MII_BMCR, MII_READ);
+ bmcr |= (BMCR_ANENABLE | BMCR_ANRESTART);
+ mii_rw(dev, np->phyaddr, MII_BMCR, bmcr);
+
+ ret = 0;
+ } else {
+ ret = -EINVAL;
+ }
+ spin_unlock_irq(&np->lock);
+
+ return ret;
+}
+
static struct ethtool_ops ops = {
.get_drvinfo = nv_get_drvinfo,
.get_link = ethtool_op_get_link,
@@ -1768,6 +2062,9 @@ static struct ethtool_ops ops = {
.set_wol = nv_set_wol,
.get_settings = nv_get_settings,
.set_settings = nv_set_settings,
+ .get_regs_len = nv_get_regs_len,
+ .get_regs = nv_get_regs,
+ .nway_reset = nv_nway_reset,
};
static int nv_open(struct net_device *dev)
@@ -1792,6 +2089,7 @@ static int nv_open(struct net_device *dev)
writel(0, base + NvRegAdapterControl);
/* 2) initialize descriptor rings */
+ set_bufsize(dev);
oom = nv_init_ring(dev);
writel(0, base + NvRegLinkSpeed);
@@ -1802,20 +2100,14 @@ static int nv_open(struct net_device *dev)
np->in_shutdown = 0;
/* 3) set mac address */
- {
- u32 mac[2];
-
- mac[0] = (dev->dev_addr[0] << 0) + (dev->dev_addr[1] << 8) +
- (dev->dev_addr[2] << 16) + (dev->dev_addr[3] << 24);
- mac[1] = (dev->dev_addr[4] << 0) + (dev->dev_addr[5] << 8);
-
- writel(mac[0], base + NvRegMacAddrA);
- writel(mac[1], base + NvRegMacAddrB);
- }
+ nv_copy_mac_to_hw(dev);
/* 4) give hw rings */
writel((u32) np->ring_addr, base + NvRegRxRingPhysAddr);
- writel((u32) (np->ring_addr + RX_RING*sizeof(struct ring_desc)), base + NvRegTxRingPhysAddr);
+ if (np->desc_ver == DESC_VER_1 || np->desc_ver == DESC_VER_2)
+ writel((u32) (np->ring_addr + RX_RING*sizeof(struct ring_desc)), base + NvRegTxRingPhysAddr);
+ else
+ writel((u32) (np->ring_addr + RX_RING*sizeof(struct ring_desc_ex)), base + NvRegTxRingPhysAddr);
writel( ((RX_RING-1) << NVREG_RINGSZ_RXSHIFT) + ((TX_RING-1) << NVREG_RINGSZ_TXSHIFT),
base + NvRegRingSizes);
@@ -1837,7 +2129,7 @@ static int nv_open(struct net_device *dev)
writel(NVREG_MISC1_FORCE | NVREG_MISC1_HD, base + NvRegMisc1);
writel(readl(base + NvRegTransmitterStatus), base + NvRegTransmitterStatus);
writel(NVREG_PFF_ALWAYS, base + NvRegPacketFilterFlags);
- writel(NVREG_OFFLOAD_NORMAL, base + NvRegOffloadConfig);
+ writel(np->rx_buf_sz, base + NvRegOffloadConfig);
writel(readl(base + NvRegReceiverStatus), base + NvRegReceiverStatus);
get_random_bytes(&i, sizeof(i));
@@ -1888,6 +2180,9 @@ static int nv_open(struct net_device *dev)
writel(NVREG_MIISTAT_MASK, base + NvRegMIIStatus);
dprintk(KERN_INFO "startup: got 0x%08x.\n", miistat);
}
+ /* set linkspeed to invalid value, thus force nv_update_linkspeed
+ * to init hw */
+ np->linkspeed = 0;
ret = nv_update_linkspeed(dev);
nv_start_rx(dev);
nv_start_tx(dev);
@@ -1942,6 +2237,12 @@ static int nv_close(struct net_device *dev)
if (np->wolenabled)
nv_start_rx(dev);
+ /* special op: write back the misordered MAC address - otherwise
+ * the next nv_probe would see a wrong address.
+ */
+ writel(np->orig_mac[0], base + NvRegMacAddrA);
+ writel(np->orig_mac[1], base + NvRegMacAddrB);
+
/* FIXME: power down nic */
return 0;
@@ -2006,32 +2307,55 @@ static int __devinit nv_probe(struct pci_dev *pci_dev, const struct pci_device_i
}
/* handle different descriptor versions */
- if (pci_dev->device == PCI_DEVICE_ID_NVIDIA_NVENET_1 ||
- pci_dev->device == PCI_DEVICE_ID_NVIDIA_NVENET_2 ||
- pci_dev->device == PCI_DEVICE_ID_NVIDIA_NVENET_3 ||
- pci_dev->device == PCI_DEVICE_ID_NVIDIA_NVENET_12 ||
- pci_dev->device == PCI_DEVICE_ID_NVIDIA_NVENET_13)
- np->desc_ver = DESC_VER_1;
- else
+ if (id->driver_data & DEV_HAS_HIGH_DMA) {
+ /* packet format 3: supports 40-bit addressing */
+ np->desc_ver = DESC_VER_3;
+ if (pci_set_dma_mask(pci_dev, 0x0000007fffffffffULL)) {
+ printk(KERN_INFO "forcedeth: 64-bit DMA failed, using 32-bit addressing for device %s.\n",
+ pci_name(pci_dev));
+ }
+ } else if (id->driver_data & DEV_HAS_LARGEDESC) {
+ /* packet format 2: supports jumbo frames */
np->desc_ver = DESC_VER_2;
+ } else {
+ /* original packet format */
+ np->desc_ver = DESC_VER_1;
+ }
+
+ np->pkt_limit = NV_PKTLIMIT_1;
+ if (id->driver_data & DEV_HAS_LARGEDESC)
+ np->pkt_limit = NV_PKTLIMIT_2;
err = -ENOMEM;
np->base = ioremap(addr, NV_PCI_REGSZ);
if (!np->base)
goto out_relreg;
dev->base_addr = (unsigned long)np->base;
+
dev->irq = pci_dev->irq;
- np->rx_ring = pci_alloc_consistent(pci_dev, sizeof(struct ring_desc) * (RX_RING + TX_RING),
- &np->ring_addr);
- if (!np->rx_ring)
- goto out_unmap;
- np->tx_ring = &np->rx_ring[RX_RING];
+
+ if (np->desc_ver == DESC_VER_1 || np->desc_ver == DESC_VER_2) {
+ np->rx_ring.orig = pci_alloc_consistent(pci_dev,
+ sizeof(struct ring_desc) * (RX_RING + TX_RING),
+ &np->ring_addr);
+ if (!np->rx_ring.orig)
+ goto out_unmap;
+ np->tx_ring.orig = &np->rx_ring.orig[RX_RING];
+ } else {
+ np->rx_ring.ex = pci_alloc_consistent(pci_dev,
+ sizeof(struct ring_desc_ex) * (RX_RING + TX_RING),
+ &np->ring_addr);
+ if (!np->rx_ring.ex)
+ goto out_unmap;
+ np->tx_ring.ex = &np->rx_ring.ex[RX_RING];
+ }
dev->open = nv_open;
dev->stop = nv_close;
dev->hard_start_xmit = nv_start_xmit;
dev->get_stats = nv_get_stats;
dev->change_mtu = nv_change_mtu;
+ dev->set_mac_address = nv_set_mac_address;
dev->set_multicast_list = nv_set_multicast;
#ifdef CONFIG_NET_POLL_CONTROLLER
dev->poll_controller = nv_poll_controller;
@@ -2080,17 +2404,10 @@ static int __devinit nv_probe(struct pci_dev *pci_dev, const struct pci_device_i
if (np->desc_ver == DESC_VER_1) {
np->tx_flags = NV_TX_LASTPACKET|NV_TX_VALID;
- if (id->driver_data & DEV_NEED_LASTPACKET1)
- np->tx_flags |= NV_TX_LASTPACKET1;
} else {
np->tx_flags = NV_TX2_LASTPACKET|NV_TX2_VALID;
- if (id->driver_data & DEV_NEED_LASTPACKET1)
- np->tx_flags |= NV_TX2_LASTPACKET1;
}
- if (id->driver_data & DEV_IRQMASK_1)
- np->irqmask = NVREG_IRQMASK_WANTED_1;
- if (id->driver_data & DEV_IRQMASK_2)
- np->irqmask = NVREG_IRQMASK_WANTED_2;
+ np->irqmask = NVREG_IRQMASK_WANTED;
if (id->driver_data & DEV_NEED_TIMERIRQ)
np->irqmask |= NVREG_IRQ_TIMER;
if (id->driver_data & DEV_NEED_LINKTIMER) {
@@ -2155,8 +2472,12 @@ static int __devinit nv_probe(struct pci_dev *pci_dev, const struct pci_device_i
return 0;
out_freering:
- pci_free_consistent(np->pci_dev, sizeof(struct ring_desc) * (RX_RING + TX_RING),
- np->rx_ring, np->ring_addr);
+ if (np->desc_ver == DESC_VER_1 || np->desc_ver == DESC_VER_2)
+ pci_free_consistent(np->pci_dev, sizeof(struct ring_desc) * (RX_RING + TX_RING),
+ np->rx_ring.orig, np->ring_addr);
+ else
+ pci_free_consistent(np->pci_dev, sizeof(struct ring_desc_ex) * (RX_RING + TX_RING),
+ np->rx_ring.ex, np->ring_addr);
pci_set_drvdata(pci_dev, NULL);
out_unmap:
iounmap(get_hwbase(dev));
@@ -2174,18 +2495,14 @@ static void __devexit nv_remove(struct pci_dev *pci_dev)
{
struct net_device *dev = pci_get_drvdata(pci_dev);
struct fe_priv *np = get_nvpriv(dev);
- u8 __iomem *base = get_hwbase(dev);
unregister_netdev(dev);
- /* special op: write back the misordered MAC address - otherwise
- * the next nv_probe would see a wrong address.
- */
- writel(np->orig_mac[0], base + NvRegMacAddrA);
- writel(np->orig_mac[1], base + NvRegMacAddrB);
-
/* free all structures */
- pci_free_consistent(np->pci_dev, sizeof(struct ring_desc) * (RX_RING + TX_RING), np->rx_ring, np->ring_addr);
+ if (np->desc_ver == DESC_VER_1 || np->desc_ver == DESC_VER_2)
+ pci_free_consistent(np->pci_dev, sizeof(struct ring_desc) * (RX_RING + TX_RING), np->rx_ring.orig, np->ring_addr);
+ else
+ pci_free_consistent(np->pci_dev, sizeof(struct ring_desc_ex) * (RX_RING + TX_RING), np->rx_ring.ex, np->ring_addr);
iounmap(get_hwbase(dev));
pci_release_regions(pci_dev);
pci_disable_device(pci_dev);
@@ -2195,109 +2512,64 @@ static void __devexit nv_remove(struct pci_dev *pci_dev)
static struct pci_device_id pci_tbl[] = {
{ /* nForce Ethernet Controller */
- .vendor = PCI_VENDOR_ID_NVIDIA,
- .device = PCI_DEVICE_ID_NVIDIA_NVENET_1,
- .subvendor = PCI_ANY_ID,
- .subdevice = PCI_ANY_ID,
- .driver_data = DEV_IRQMASK_1|DEV_NEED_TIMERIRQ|DEV_NEED_LINKTIMER,
+ PCI_DEVICE(PCI_VENDOR_ID_NVIDIA, PCI_DEVICE_ID_NVIDIA_NVENET_1),
+ .driver_data = DEV_NEED_TIMERIRQ|DEV_NEED_LINKTIMER,
},
{ /* nForce2 Ethernet Controller */
- .vendor = PCI_VENDOR_ID_NVIDIA,
- .device = PCI_DEVICE_ID_NVIDIA_NVENET_2,
- .subvendor = PCI_ANY_ID,
- .subdevice = PCI_ANY_ID,
- .driver_data = DEV_NEED_LASTPACKET1|DEV_IRQMASK_2|DEV_NEED_TIMERIRQ|DEV_NEED_LINKTIMER,
+ PCI_DEVICE(PCI_VENDOR_ID_NVIDIA, PCI_DEVICE_ID_NVIDIA_NVENET_2),
+ .driver_data = DEV_NEED_TIMERIRQ|DEV_NEED_LINKTIMER,
},
{ /* nForce3 Ethernet Controller */
- .vendor = PCI_VENDOR_ID_NVIDIA,
- .device = PCI_DEVICE_ID_NVIDIA_NVENET_3,
- .subvendor = PCI_ANY_ID,
- .subdevice = PCI_ANY_ID,
- .driver_data = DEV_NEED_LASTPACKET1|DEV_IRQMASK_2|DEV_NEED_TIMERIRQ|DEV_NEED_LINKTIMER,
+ PCI_DEVICE(PCI_VENDOR_ID_NVIDIA, PCI_DEVICE_ID_NVIDIA_NVENET_3),
+ .driver_data = DEV_NEED_TIMERIRQ|DEV_NEED_LINKTIMER,
},
{ /* nForce3 Ethernet Controller */
- .vendor = PCI_VENDOR_ID_NVIDIA,
- .device = PCI_DEVICE_ID_NVIDIA_NVENET_4,
- .subvendor = PCI_ANY_ID,
- .subdevice = PCI_ANY_ID,
- .driver_data = DEV_NEED_LASTPACKET1|DEV_IRQMASK_2|DEV_NEED_TIMERIRQ|DEV_NEED_LINKTIMER,
+ PCI_DEVICE(PCI_VENDOR_ID_NVIDIA, PCI_DEVICE_ID_NVIDIA_NVENET_4),
+ .driver_data = DEV_NEED_TIMERIRQ|DEV_NEED_LINKTIMER|DEV_HAS_LARGEDESC,
},
{ /* nForce3 Ethernet Controller */
- .vendor = PCI_VENDOR_ID_NVIDIA,
- .device = PCI_DEVICE_ID_NVIDIA_NVENET_5,
- .subvendor = PCI_ANY_ID,
- .subdevice = PCI_ANY_ID,
- .driver_data = DEV_NEED_LASTPACKET1|DEV_IRQMASK_2|DEV_NEED_TIMERIRQ|DEV_NEED_LINKTIMER,
+ PCI_DEVICE(PCI_VENDOR_ID_NVIDIA, PCI_DEVICE_ID_NVIDIA_NVENET_5),
+ .driver_data = DEV_NEED_TIMERIRQ|DEV_NEED_LINKTIMER|DEV_HAS_LARGEDESC,
},
{ /* nForce3 Ethernet Controller */
- .vendor = PCI_VENDOR_ID_NVIDIA,
- .device = PCI_DEVICE_ID_NVIDIA_NVENET_6,
- .subvendor = PCI_ANY_ID,
- .subdevice = PCI_ANY_ID,
- .driver_data = DEV_NEED_LASTPACKET1|DEV_IRQMASK_2|DEV_NEED_TIMERIRQ|DEV_NEED_LINKTIMER,
+ PCI_DEVICE(PCI_VENDOR_ID_NVIDIA, PCI_DEVICE_ID_NVIDIA_NVENET_6),
+ .driver_data = DEV_NEED_TIMERIRQ|DEV_NEED_LINKTIMER|DEV_HAS_LARGEDESC,
},
{ /* nForce3 Ethernet Controller */
- .vendor = PCI_VENDOR_ID_NVIDIA,
- .device = PCI_DEVICE_ID_NVIDIA_NVENET_7,
- .subvendor = PCI_ANY_ID,
- .subdevice = PCI_ANY_ID,
- .driver_data = DEV_NEED_LASTPACKET1|DEV_IRQMASK_2|DEV_NEED_TIMERIRQ|DEV_NEED_LINKTIMER,
+ PCI_DEVICE(PCI_VENDOR_ID_NVIDIA, PCI_DEVICE_ID_NVIDIA_NVENET_7),
+ .driver_data = DEV_NEED_TIMERIRQ|DEV_NEED_LINKTIMER|DEV_HAS_LARGEDESC,
},
{ /* CK804 Ethernet Controller */
- .vendor = PCI_VENDOR_ID_NVIDIA,
- .device = PCI_DEVICE_ID_NVIDIA_NVENET_8,
- .subvendor = PCI_ANY_ID,
- .subdevice = PCI_ANY_ID,
- .driver_data = DEV_NEED_LASTPACKET1|DEV_IRQMASK_2|DEV_NEED_TIMERIRQ|DEV_NEED_LINKTIMER,
+ PCI_DEVICE(PCI_VENDOR_ID_NVIDIA, PCI_DEVICE_ID_NVIDIA_NVENET_8),
+ .driver_data = DEV_NEED_TIMERIRQ|DEV_NEED_LINKTIMER|DEV_HAS_LARGEDESC|DEV_HAS_HIGH_DMA,
},
{ /* CK804 Ethernet Controller */
- .vendor = PCI_VENDOR_ID_NVIDIA,
- .device = PCI_DEVICE_ID_NVIDIA_NVENET_9,
- .subvendor = PCI_ANY_ID,
- .subdevice = PCI_ANY_ID,
- .driver_data = DEV_NEED_LASTPACKET1|DEV_IRQMASK_2|DEV_NEED_TIMERIRQ|DEV_NEED_LINKTIMER,
+ PCI_DEVICE(PCI_VENDOR_ID_NVIDIA, PCI_DEVICE_ID_NVIDIA_NVENET_9),
+ .driver_data = DEV_NEED_TIMERIRQ|DEV_NEED_LINKTIMER|DEV_HAS_LARGEDESC|DEV_HAS_HIGH_DMA,
},
{ /* MCP04 Ethernet Controller */
- .vendor = PCI_VENDOR_ID_NVIDIA,
- .device = PCI_DEVICE_ID_NVIDIA_NVENET_10,
- .subvendor = PCI_ANY_ID,
- .subdevice = PCI_ANY_ID,
- .driver_data = DEV_NEED_LASTPACKET1|DEV_IRQMASK_2|DEV_NEED_TIMERIRQ|DEV_NEED_LINKTIMER,
+ PCI_DEVICE(PCI_VENDOR_ID_NVIDIA, PCI_DEVICE_ID_NVIDIA_NVENET_10),
+ .driver_data = DEV_NEED_TIMERIRQ|DEV_NEED_LINKTIMER|DEV_HAS_LARGEDESC|DEV_HAS_HIGH_DMA,
},
{ /* MCP04 Ethernet Controller */
- .vendor = PCI_VENDOR_ID_NVIDIA,
- .device = PCI_DEVICE_ID_NVIDIA_NVENET_11,
- .subvendor = PCI_ANY_ID,
- .subdevice = PCI_ANY_ID,
- .driver_data = DEV_NEED_LASTPACKET1|DEV_IRQMASK_2|DEV_NEED_TIMERIRQ|DEV_NEED_LINKTIMER,
+ PCI_DEVICE(PCI_VENDOR_ID_NVIDIA, PCI_DEVICE_ID_NVIDIA_NVENET_11),
+ .driver_data = DEV_NEED_TIMERIRQ|DEV_NEED_LINKTIMER|DEV_HAS_LARGEDESC|DEV_HAS_HIGH_DMA,
},
{ /* MCP51 Ethernet Controller */
- .vendor = PCI_VENDOR_ID_NVIDIA,
- .device = PCI_DEVICE_ID_NVIDIA_NVENET_12,
- .subvendor = PCI_ANY_ID,
- .subdevice = PCI_ANY_ID,
- .driver_data = DEV_NEED_LASTPACKET1|DEV_IRQMASK_2|DEV_NEED_TIMERIRQ|DEV_NEED_LINKTIMER,
+ PCI_DEVICE(PCI_VENDOR_ID_NVIDIA, PCI_DEVICE_ID_NVIDIA_NVENET_12),
+ .driver_data = DEV_NEED_TIMERIRQ|DEV_NEED_LINKTIMER|DEV_HAS_HIGH_DMA,
},
{ /* MCP51 Ethernet Controller */
- .vendor = PCI_VENDOR_ID_NVIDIA,
- .device = PCI_DEVICE_ID_NVIDIA_NVENET_13,
- .subvendor = PCI_ANY_ID,
- .subdevice = PCI_ANY_ID,
- .driver_data = DEV_NEED_LASTPACKET1|DEV_IRQMASK_2|DEV_NEED_TIMERIRQ|DEV_NEED_LINKTIMER,
+ PCI_DEVICE(PCI_VENDOR_ID_NVIDIA, PCI_DEVICE_ID_NVIDIA_NVENET_13),
+ .driver_data = DEV_NEED_TIMERIRQ|DEV_NEED_LINKTIMER|DEV_HAS_HIGH_DMA,
},
{ /* MCP55 Ethernet Controller */
- .vendor = PCI_VENDOR_ID_NVIDIA,
- .device = PCI_DEVICE_ID_NVIDIA_NVENET_14,
- .subvendor = PCI_ANY_ID,
- .subdevice = PCI_ANY_ID,
- .driver_data = DEV_NEED_LASTPACKET1|DEV_IRQMASK_2|DEV_NEED_TIMERIRQ|DEV_NEED_LINKTIMER,
+ PCI_DEVICE(PCI_VENDOR_ID_NVIDIA, PCI_DEVICE_ID_NVIDIA_NVENET_14),
+ .driver_data = DEV_NEED_TIMERIRQ|DEV_NEED_LINKTIMER|DEV_HAS_LARGEDESC|DEV_HAS_HIGH_DMA,
},
{ /* MCP55 Ethernet Controller */
- .vendor = PCI_VENDOR_ID_NVIDIA,
- .device = PCI_DEVICE_ID_NVIDIA_NVENET_15,
- .subvendor = PCI_ANY_ID,
- .subdevice = PCI_ANY_ID,
- .driver_data = DEV_NEED_LASTPACKET1|DEV_IRQMASK_2|DEV_NEED_TIMERIRQ|DEV_NEED_LINKTIMER,
+ PCI_DEVICE(PCI_VENDOR_ID_NVIDIA, PCI_DEVICE_ID_NVIDIA_NVENET_15),
+ .driver_data = DEV_NEED_TIMERIRQ|DEV_NEED_LINKTIMER|DEV_HAS_LARGEDESC|DEV_HAS_HIGH_DMA,
},
{0,},
};
diff --git a/drivers/net/hamradio/6pack.c b/drivers/net/hamradio/6pack.c
index f9e3be96963..0b230222bfe 100644
--- a/drivers/net/hamradio/6pack.c
+++ b/drivers/net/hamradio/6pack.c
@@ -308,12 +308,6 @@ static int sp_set_mac_address(struct net_device *dev, void *addr)
{
struct sockaddr_ax25 *sa = addr;
- if (sa->sax25_family != AF_AX25)
- return -EINVAL;
-
- if (!sa->sax25_ndigis)
- return -EINVAL;
-
spin_lock_irq(&dev->xmit_lock);
memcpy(dev->dev_addr, &sa->sax25_call, AX25_ADDR_LEN);
spin_unlock_irq(&dev->xmit_lock);
@@ -668,6 +662,9 @@ static int sixpack_open(struct tty_struct *tty)
netif_start_queue(dev);
init_timer(&sp->tx_t);
+ sp->tx_t.function = sp_xmit_on_air;
+ sp->tx_t.data = (unsigned long) sp;
+
init_timer(&sp->resync_t);
spin_unlock_bh(&sp->lock);
diff --git a/drivers/net/hamradio/Kconfig b/drivers/net/hamradio/Kconfig
index 0cd54306e63..de087cd609d 100644
--- a/drivers/net/hamradio/Kconfig
+++ b/drivers/net/hamradio/Kconfig
@@ -1,6 +1,6 @@
config MKISS
tristate "Serial port KISS driver"
- depends on AX25 && BROKEN_ON_SMP
+ depends on AX25
---help---
KISS is a protocol used for the exchange of data between a computer
and a Terminal Node Controller (a small embedded system commonly
diff --git a/drivers/net/hamradio/baycom_epp.c b/drivers/net/hamradio/baycom_epp.c
index a7f15d9f13e..5298096afbd 100644
--- a/drivers/net/hamradio/baycom_epp.c
+++ b/drivers/net/hamradio/baycom_epp.c
@@ -54,6 +54,7 @@
#include <linux/kmod.h>
#include <linux/hdlcdrv.h>
#include <linux/baycom.h>
+#include <linux/jiffies.h>
#if defined(CONFIG_AX25) || defined(CONFIG_AX25_MODULE)
/* prototypes for ax25_encapsulate and ax25_rebuild_header */
#include <net/ax25.h>
@@ -287,7 +288,7 @@ static inline void baycom_int_freq(struct baycom_state *bc)
* measure the interrupt frequency
*/
bc->debug_vals.cur_intcnt++;
- if ((cur_jiffies - bc->debug_vals.last_jiffies) >= HZ) {
+ if (time_after_eq(cur_jiffies, bc->debug_vals.last_jiffies + HZ)) {
bc->debug_vals.last_jiffies = cur_jiffies;
bc->debug_vals.last_intcnt = bc->debug_vals.cur_intcnt;
bc->debug_vals.cur_intcnt = 0;
diff --git a/drivers/net/hamradio/baycom_par.c b/drivers/net/hamradio/baycom_par.c
index 612ad452bee..3b1bef1ee21 100644
--- a/drivers/net/hamradio/baycom_par.c
+++ b/drivers/net/hamradio/baycom_par.c
@@ -84,6 +84,7 @@
#include <linux/baycom.h>
#include <linux/parport.h>
#include <linux/bitops.h>
+#include <linux/jiffies.h>
#include <asm/bug.h>
#include <asm/system.h>
@@ -165,7 +166,7 @@ static void __inline__ baycom_int_freq(struct baycom_state *bc)
* measure the interrupt frequency
*/
bc->debug_vals.cur_intcnt++;
- if ((cur_jiffies - bc->debug_vals.last_jiffies) >= HZ) {
+ if (time_after_eq(cur_jiffies, bc->debug_vals.last_jiffies + HZ)) {
bc->debug_vals.last_jiffies = cur_jiffies;
bc->debug_vals.last_intcnt = bc->debug_vals.cur_intcnt;
bc->debug_vals.cur_intcnt = 0;
diff --git a/drivers/net/hamradio/baycom_ser_fdx.c b/drivers/net/hamradio/baycom_ser_fdx.c
index 25f270b0537..232793d2ce6 100644
--- a/drivers/net/hamradio/baycom_ser_fdx.c
+++ b/drivers/net/hamradio/baycom_ser_fdx.c
@@ -79,6 +79,7 @@
#include <asm/io.h>
#include <linux/hdlcdrv.h>
#include <linux/baycom.h>
+#include <linux/jiffies.h>
/* --------------------------------------------------------------------- */
@@ -159,7 +160,7 @@ static inline void baycom_int_freq(struct baycom_state *bc)
* measure the interrupt frequency
*/
bc->debug_vals.cur_intcnt++;
- if ((cur_jiffies - bc->debug_vals.last_jiffies) >= HZ) {
+ if (time_after_eq(cur_jiffies, bc->debug_vals.last_jiffies + HZ)) {
bc->debug_vals.last_jiffies = cur_jiffies;
bc->debug_vals.last_intcnt = bc->debug_vals.cur_intcnt;
bc->debug_vals.cur_intcnt = 0;
diff --git a/drivers/net/hamradio/baycom_ser_hdx.c b/drivers/net/hamradio/baycom_ser_hdx.c
index eead85d0096..be596a3eb3f 100644
--- a/drivers/net/hamradio/baycom_ser_hdx.c
+++ b/drivers/net/hamradio/baycom_ser_hdx.c
@@ -69,6 +69,7 @@
#include <asm/io.h>
#include <linux/hdlcdrv.h>
#include <linux/baycom.h>
+#include <linux/jiffies.h>
/* --------------------------------------------------------------------- */
@@ -150,7 +151,7 @@ static inline void baycom_int_freq(struct baycom_state *bc)
* measure the interrupt frequency
*/
bc->debug_vals.cur_intcnt++;
- if ((cur_jiffies - bc->debug_vals.last_jiffies) >= HZ) {
+ if (time_after_eq(cur_jiffies, bc->debug_vals.last_jiffies + HZ)) {
bc->debug_vals.last_jiffies = cur_jiffies;
bc->debug_vals.last_intcnt = bc->debug_vals.cur_intcnt;
bc->debug_vals.cur_intcnt = 0;
diff --git a/drivers/net/hamradio/bpqether.c b/drivers/net/hamradio/bpqether.c
index ba9f0580e1f..2946e037a9b 100644
--- a/drivers/net/hamradio/bpqether.c
+++ b/drivers/net/hamradio/bpqether.c
@@ -98,7 +98,7 @@ static char bcast_addr[6]={0xFF,0xFF,0xFF,0xFF,0xFF,0xFF};
static char bpq_eth_addr[6];
-static int bpq_rcv(struct sk_buff *, struct net_device *, struct packet_type *);
+static int bpq_rcv(struct sk_buff *, struct net_device *, struct packet_type *, struct net_device *);
static int bpq_device_event(struct notifier_block *, unsigned long, void *);
static const char *bpq_print_ethaddr(const unsigned char *);
@@ -165,7 +165,7 @@ static inline int dev_is_ethdev(struct net_device *dev)
/*
* Receive an AX.25 frame via an ethernet interface.
*/
-static int bpq_rcv(struct sk_buff *skb, struct net_device *dev, struct packet_type *ptype)
+static int bpq_rcv(struct sk_buff *skb, struct net_device *dev, struct packet_type *ptype, struct net_device *orig_dev)
{
int len;
char * ptr;
diff --git a/drivers/net/hamradio/mkiss.c b/drivers/net/hamradio/mkiss.c
index 3035422f5ad..63b1a2b86ac 100644
--- a/drivers/net/hamradio/mkiss.c
+++ b/drivers/net/hamradio/mkiss.c
@@ -1,30 +1,19 @@
/*
- * MKISS Driver
+ * This program is free software; you can distribute it and/or modify it
+ * under the terms of the GNU General Public License (Version 2) as
+ * published by the Free Software Foundation.
*
- * This module:
- * This module is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation; either version
- * 2 of the License, or (at your option) any later version.
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License
+ * for more details.
*
- * This module implements the AX.25 protocol for kernel-based
- * devices like TTYs. It interfaces between a raw TTY, and the
- * kernel's AX.25 protocol layers, just like slip.c.
- * AX.25 needs to be separated from slip.c while slip.c is no
- * longer a static kernel device since it is a module.
- * This method clears the way to implement other kiss protocols
- * like mkiss smack g8bpq ..... so far only mkiss is implemented.
+ * You should have received a copy of the GNU General Public License along
+ * with this program; if not, write to the Free Software Foundation, Inc.,
+ * 59 Temple Place - Suite 330, Boston MA 02111-1307, USA.
*
- * Hans Alblas <hans@esrac.ele.tue.nl>
- *
- * History
- * Jonathan (G4KLX) Fixed to match Linux networking changes - 2.1.15.
- * Matthias (DG2FEF) Added support for FlexNet CRC (on special request)
- * Fixed bug in ax25_close(): dev_lock_wait() was
- * called twice, causing a deadlock.
- * Jeroen (PE1RXQ) Removed old MKISS_MAGIC stuff and calls to
- * MOD_*_USE_COUNT
- * Remove cli() and fix rtnl lock usage.
+ * Copyright (C) Hans Alblas PE1AYX <hans@esrac.ele.tue.nl>
+ * Copyright (C) 2004, 05 Ralf Baechle DL5RB <ralf@linux-mips.org>
*/
#include <linux/config.h>
@@ -46,177 +35,300 @@
#include <linux/etherdevice.h>
#include <linux/skbuff.h>
#include <linux/if_arp.h>
+#include <linux/jiffies.h>
#include <net/ax25.h>
-#include "mkiss.h"
-
#ifdef CONFIG_INET
#include <linux/ip.h>
#include <linux/tcp.h>
#endif
-static char banner[] __initdata = KERN_INFO "mkiss: AX.25 Multikiss, Hans Albas PE1AYX\n";
-
-typedef struct ax25_ctrl {
- struct ax_disp ctrl; /* */
- struct net_device dev; /* the device */
-} ax25_ctrl_t;
-
-static ax25_ctrl_t **ax25_ctrls;
-
-int ax25_maxdev = AX25_MAXDEV; /* Can be overridden with insmod! */
-
-static struct tty_ldisc ax_ldisc;
-
-static int ax25_init(struct net_device *);
-static int kiss_esc(unsigned char *, unsigned char *, int);
-static int kiss_esc_crc(unsigned char *, unsigned char *, unsigned short, int);
-static void kiss_unesc(struct ax_disp *, unsigned char);
+#define AX_MTU 236
+
+/* SLIP/KISS protocol characters. */
+#define END 0300 /* indicates end of frame */
+#define ESC 0333 /* indicates byte stuffing */
+#define ESC_END 0334 /* ESC ESC_END means END 'data' */
+#define ESC_ESC 0335 /* ESC ESC_ESC means ESC 'data' */
+
+struct mkiss {
+ struct tty_struct *tty; /* ptr to TTY structure */
+ struct net_device *dev; /* easy for intr handling */
+
+ /* These are pointers to the malloc()ed frame buffers. */
+ spinlock_t buflock;/* lock for rbuf and xbuf */
+ unsigned char *rbuff; /* receiver buffer */
+ int rcount; /* received chars counter */
+ unsigned char *xbuff; /* transmitter buffer */
+ unsigned char *xhead; /* pointer to next byte to XMIT */
+ int xleft; /* bytes left in XMIT queue */
+
+ struct net_device_stats stats;
+
+ /* Detailed SLIP statistics. */
+ int mtu; /* Our mtu (to spot changes!) */
+ int buffsize; /* Max buffers sizes */
+
+ unsigned long flags; /* Flag values/ mode etc */
+ /* long req'd: used by set_bit --RR */
+#define AXF_INUSE 0 /* Channel in use */
+#define AXF_ESCAPE 1 /* ESC received */
+#define AXF_ERROR 2 /* Parity, etc. error */
+#define AXF_KEEPTEST 3 /* Keepalive test flag */
+#define AXF_OUTWAIT 4 /* is outpacket was flag */
+
+ int mode;
+ int crcmode; /* MW: for FlexNet, SMACK etc. */
+#define CRC_MODE_NONE 0
+#define CRC_MODE_FLEX 1
+#define CRC_MODE_SMACK 2
+
+ atomic_t refcnt;
+ struct semaphore dead_sem;
+};
/*---------------------------------------------------------------------------*/
-static const unsigned short Crc_flex_table[] = {
- 0x0f87, 0x1e0e, 0x2c95, 0x3d1c, 0x49a3, 0x582a, 0x6ab1, 0x7b38,
- 0x83cf, 0x9246, 0xa0dd, 0xb154, 0xc5eb, 0xd462, 0xe6f9, 0xf770,
- 0x1f06, 0x0e8f, 0x3c14, 0x2d9d, 0x5922, 0x48ab, 0x7a30, 0x6bb9,
- 0x934e, 0x82c7, 0xb05c, 0xa1d5, 0xd56a, 0xc4e3, 0xf678, 0xe7f1,
- 0x2e85, 0x3f0c, 0x0d97, 0x1c1e, 0x68a1, 0x7928, 0x4bb3, 0x5a3a,
- 0xa2cd, 0xb344, 0x81df, 0x9056, 0xe4e9, 0xf560, 0xc7fb, 0xd672,
- 0x3e04, 0x2f8d, 0x1d16, 0x0c9f, 0x7820, 0x69a9, 0x5b32, 0x4abb,
- 0xb24c, 0xa3c5, 0x915e, 0x80d7, 0xf468, 0xe5e1, 0xd77a, 0xc6f3,
- 0x4d83, 0x5c0a, 0x6e91, 0x7f18, 0x0ba7, 0x1a2e, 0x28b5, 0x393c,
- 0xc1cb, 0xd042, 0xe2d9, 0xf350, 0x87ef, 0x9666, 0xa4fd, 0xb574,
- 0x5d02, 0x4c8b, 0x7e10, 0x6f99, 0x1b26, 0x0aaf, 0x3834, 0x29bd,
- 0xd14a, 0xc0c3, 0xf258, 0xe3d1, 0x976e, 0x86e7, 0xb47c, 0xa5f5,
- 0x6c81, 0x7d08, 0x4f93, 0x5e1a, 0x2aa5, 0x3b2c, 0x09b7, 0x183e,
- 0xe0c9, 0xf140, 0xc3db, 0xd252, 0xa6ed, 0xb764, 0x85ff, 0x9476,
- 0x7c00, 0x6d89, 0x5f12, 0x4e9b, 0x3a24, 0x2bad, 0x1936, 0x08bf,
- 0xf048, 0xe1c1, 0xd35a, 0xc2d3, 0xb66c, 0xa7e5, 0x957e, 0x84f7,
- 0x8b8f, 0x9a06, 0xa89d, 0xb914, 0xcdab, 0xdc22, 0xeeb9, 0xff30,
- 0x07c7, 0x164e, 0x24d5, 0x355c, 0x41e3, 0x506a, 0x62f1, 0x7378,
- 0x9b0e, 0x8a87, 0xb81c, 0xa995, 0xdd2a, 0xcca3, 0xfe38, 0xefb1,
- 0x1746, 0x06cf, 0x3454, 0x25dd, 0x5162, 0x40eb, 0x7270, 0x63f9,
- 0xaa8d, 0xbb04, 0x899f, 0x9816, 0xeca9, 0xfd20, 0xcfbb, 0xde32,
- 0x26c5, 0x374c, 0x05d7, 0x145e, 0x60e1, 0x7168, 0x43f3, 0x527a,
- 0xba0c, 0xab85, 0x991e, 0x8897, 0xfc28, 0xeda1, 0xdf3a, 0xceb3,
- 0x3644, 0x27cd, 0x1556, 0x04df, 0x7060, 0x61e9, 0x5372, 0x42fb,
- 0xc98b, 0xd802, 0xea99, 0xfb10, 0x8faf, 0x9e26, 0xacbd, 0xbd34,
- 0x45c3, 0x544a, 0x66d1, 0x7758, 0x03e7, 0x126e, 0x20f5, 0x317c,
- 0xd90a, 0xc883, 0xfa18, 0xeb91, 0x9f2e, 0x8ea7, 0xbc3c, 0xadb5,
- 0x5542, 0x44cb, 0x7650, 0x67d9, 0x1366, 0x02ef, 0x3074, 0x21fd,
- 0xe889, 0xf900, 0xcb9b, 0xda12, 0xaead, 0xbf24, 0x8dbf, 0x9c36,
- 0x64c1, 0x7548, 0x47d3, 0x565a, 0x22e5, 0x336c, 0x01f7, 0x107e,
- 0xf808, 0xe981, 0xdb1a, 0xca93, 0xbe2c, 0xafa5, 0x9d3e, 0x8cb7,
- 0x7440, 0x65c9, 0x5752, 0x46db, 0x3264, 0x23ed, 0x1176, 0x00ff
+static const unsigned short crc_flex_table[] = {
+ 0x0f87, 0x1e0e, 0x2c95, 0x3d1c, 0x49a3, 0x582a, 0x6ab1, 0x7b38,
+ 0x83cf, 0x9246, 0xa0dd, 0xb154, 0xc5eb, 0xd462, 0xe6f9, 0xf770,
+ 0x1f06, 0x0e8f, 0x3c14, 0x2d9d, 0x5922, 0x48ab, 0x7a30, 0x6bb9,
+ 0x934e, 0x82c7, 0xb05c, 0xa1d5, 0xd56a, 0xc4e3, 0xf678, 0xe7f1,
+ 0x2e85, 0x3f0c, 0x0d97, 0x1c1e, 0x68a1, 0x7928, 0x4bb3, 0x5a3a,
+ 0xa2cd, 0xb344, 0x81df, 0x9056, 0xe4e9, 0xf560, 0xc7fb, 0xd672,
+ 0x3e04, 0x2f8d, 0x1d16, 0x0c9f, 0x7820, 0x69a9, 0x5b32, 0x4abb,
+ 0xb24c, 0xa3c5, 0x915e, 0x80d7, 0xf468, 0xe5e1, 0xd77a, 0xc6f3,
+ 0x4d83, 0x5c0a, 0x6e91, 0x7f18, 0x0ba7, 0x1a2e, 0x28b5, 0x393c,
+ 0xc1cb, 0xd042, 0xe2d9, 0xf350, 0x87ef, 0x9666, 0xa4fd, 0xb574,
+ 0x5d02, 0x4c8b, 0x7e10, 0x6f99, 0x1b26, 0x0aaf, 0x3834, 0x29bd,
+ 0xd14a, 0xc0c3, 0xf258, 0xe3d1, 0x976e, 0x86e7, 0xb47c, 0xa5f5,
+ 0x6c81, 0x7d08, 0x4f93, 0x5e1a, 0x2aa5, 0x3b2c, 0x09b7, 0x183e,
+ 0xe0c9, 0xf140, 0xc3db, 0xd252, 0xa6ed, 0xb764, 0x85ff, 0x9476,
+ 0x7c00, 0x6d89, 0x5f12, 0x4e9b, 0x3a24, 0x2bad, 0x1936, 0x08bf,
+ 0xf048, 0xe1c1, 0xd35a, 0xc2d3, 0xb66c, 0xa7e5, 0x957e, 0x84f7,
+ 0x8b8f, 0x9a06, 0xa89d, 0xb914, 0xcdab, 0xdc22, 0xeeb9, 0xff30,
+ 0x07c7, 0x164e, 0x24d5, 0x355c, 0x41e3, 0x506a, 0x62f1, 0x7378,
+ 0x9b0e, 0x8a87, 0xb81c, 0xa995, 0xdd2a, 0xcca3, 0xfe38, 0xefb1,
+ 0x1746, 0x06cf, 0x3454, 0x25dd, 0x5162, 0x40eb, 0x7270, 0x63f9,
+ 0xaa8d, 0xbb04, 0x899f, 0x9816, 0xeca9, 0xfd20, 0xcfbb, 0xde32,
+ 0x26c5, 0x374c, 0x05d7, 0x145e, 0x60e1, 0x7168, 0x43f3, 0x527a,
+ 0xba0c, 0xab85, 0x991e, 0x8897, 0xfc28, 0xeda1, 0xdf3a, 0xceb3,
+ 0x3644, 0x27cd, 0x1556, 0x04df, 0x7060, 0x61e9, 0x5372, 0x42fb,
+ 0xc98b, 0xd802, 0xea99, 0xfb10, 0x8faf, 0x9e26, 0xacbd, 0xbd34,
+ 0x45c3, 0x544a, 0x66d1, 0x7758, 0x03e7, 0x126e, 0x20f5, 0x317c,
+ 0xd90a, 0xc883, 0xfa18, 0xeb91, 0x9f2e, 0x8ea7, 0xbc3c, 0xadb5,
+ 0x5542, 0x44cb, 0x7650, 0x67d9, 0x1366, 0x02ef, 0x3074, 0x21fd,
+ 0xe889, 0xf900, 0xcb9b, 0xda12, 0xaead, 0xbf24, 0x8dbf, 0x9c36,
+ 0x64c1, 0x7548, 0x47d3, 0x565a, 0x22e5, 0x336c, 0x01f7, 0x107e,
+ 0xf808, 0xe981, 0xdb1a, 0xca93, 0xbe2c, 0xafa5, 0x9d3e, 0x8cb7,
+ 0x7440, 0x65c9, 0x5752, 0x46db, 0x3264, 0x23ed, 0x1176, 0x00ff
};
-/*---------------------------------------------------------------------------*/
-
static unsigned short calc_crc_flex(unsigned char *cp, int size)
{
- unsigned short crc = 0xffff;
-
- while (size--)
- crc = (crc << 8) ^ Crc_flex_table[((crc >> 8) ^ *cp++) & 0xff];
+ unsigned short crc = 0xffff;
- return crc;
-}
+ while (size--)
+ crc = (crc << 8) ^ crc_flex_table[((crc >> 8) ^ *cp++) & 0xff];
-/*---------------------------------------------------------------------------*/
+ return crc;
+}
static int check_crc_flex(unsigned char *cp, int size)
{
- unsigned short crc = 0xffff;
+ unsigned short crc = 0xffff;
- if (size < 3)
- return -1;
+ if (size < 3)
+ return -1;
- while (size--)
- crc = (crc << 8) ^ Crc_flex_table[((crc >> 8) ^ *cp++) & 0xff];
+ while (size--)
+ crc = (crc << 8) ^ crc_flex_table[((crc >> 8) ^ *cp++) & 0xff];
- if ((crc & 0xffff) != 0x7070)
- return -1;
+ if ((crc & 0xffff) != 0x7070)
+ return -1;
- return 0;
+ return 0;
}
-/*---------------------------------------------------------------------------*/
+/*
+ * Standard encapsulation
+ */
-/* Find a free channel, and link in this `tty' line. */
-static inline struct ax_disp *ax_alloc(void)
+static int kiss_esc(unsigned char *s, unsigned char *d, int len)
{
- ax25_ctrl_t *axp=NULL;
- int i;
+ unsigned char *ptr = d;
+ unsigned char c;
- for (i = 0; i < ax25_maxdev; i++) {
- axp = ax25_ctrls[i];
+ /*
+ * Send an initial END character to flush out any data that may have
+ * accumulated in the receiver due to line noise.
+ */
- /* Not allocated ? */
- if (axp == NULL)
- break;
+ *ptr++ = END;
- /* Not in use ? */
- if (!test_and_set_bit(AXF_INUSE, &axp->ctrl.flags))
+ while (len-- > 0) {
+ switch (c = *s++) {
+ case END:
+ *ptr++ = ESC;
+ *ptr++ = ESC_END;
break;
+ case ESC:
+ *ptr++ = ESC;
+ *ptr++ = ESC_ESC;
+ break;
+ default:
+ *ptr++ = c;
+ break;
+ }
}
- /* Sorry, too many, all slots in use */
- if (i >= ax25_maxdev)
- return NULL;
+ *ptr++ = END;
+
+ return ptr - d;
+}
+
+/*
+ * MW:
+ * OK its ugly, but tell me a better solution without copying the
+ * packet to a temporary buffer :-)
+ */
+static int kiss_esc_crc(unsigned char *s, unsigned char *d, unsigned short crc,
+ int len)
+{
+ unsigned char *ptr = d;
+ unsigned char c=0;
+
+ *ptr++ = END;
+ while (len > 0) {
+ if (len > 2)
+ c = *s++;
+ else if (len > 1)
+ c = crc >> 8;
+ else if (len > 0)
+ c = crc & 0xff;
+
+ len--;
- /* If no channels are available, allocate one */
- if (axp == NULL && (ax25_ctrls[i] = kmalloc(sizeof(ax25_ctrl_t), GFP_KERNEL)) != NULL) {
- axp = ax25_ctrls[i];
+ switch (c) {
+ case END:
+ *ptr++ = ESC;
+ *ptr++ = ESC_END;
+ break;
+ case ESC:
+ *ptr++ = ESC;
+ *ptr++ = ESC_ESC;
+ break;
+ default:
+ *ptr++ = c;
+ break;
+ }
}
- memset(axp, 0, sizeof(ax25_ctrl_t));
-
- /* Initialize channel control data */
- set_bit(AXF_INUSE, &axp->ctrl.flags);
- sprintf(axp->dev.name, "ax%d", i++);
- axp->ctrl.tty = NULL;
- axp->dev.base_addr = i;
- axp->dev.priv = (void *)&axp->ctrl;
- axp->dev.next = NULL;
- axp->dev.init = ax25_init;
-
- if (axp != NULL) {
- /*
- * register device so that it can be ifconfig'ed
- * ax25_init() will be called as a side-effect
- * SIDE-EFFECT WARNING: ax25_init() CLEARS axp->ctrl !
- */
- if (register_netdev(&axp->dev) == 0) {
- /* (Re-)Set the INUSE bit. Very Important! */
- set_bit(AXF_INUSE, &axp->ctrl.flags);
- axp->ctrl.dev = &axp->dev;
- axp->dev.priv = (void *) &axp->ctrl;
-
- return &axp->ctrl;
- } else {
- clear_bit(AXF_INUSE,&axp->ctrl.flags);
- printk(KERN_ERR "mkiss: ax_alloc() - register_netdev() failure.\n");
+ *ptr++ = END;
+
+ return ptr - d;
+}
+
+/* Send one completely decapsulated AX.25 packet to the AX.25 layer. */
+static void ax_bump(struct mkiss *ax)
+{
+ struct sk_buff *skb;
+ int count;
+
+ spin_lock_bh(&ax->buflock);
+ if (ax->rbuff[0] > 0x0f) {
+ if (ax->rbuff[0] & 0x20) {
+ ax->crcmode = CRC_MODE_FLEX;
+ if (check_crc_flex(ax->rbuff, ax->rcount) < 0) {
+ ax->stats.rx_errors++;
+ return;
+ }
+ ax->rcount -= 2;
+ /* dl9sau bugfix: the trailling two bytes flexnet crc
+ * will not be passed to the kernel. thus we have
+ * to correct the kissparm signature, because it
+ * indicates a crc but there's none
+ */
+ *ax->rbuff &= ~0x20;
}
+ }
+ spin_unlock_bh(&ax->buflock);
+
+ count = ax->rcount;
+
+ if ((skb = dev_alloc_skb(count)) == NULL) {
+ printk(KERN_ERR "mkiss: %s: memory squeeze, dropping packet.\n",
+ ax->dev->name);
+ ax->stats.rx_dropped++;
+ return;
}
- return NULL;
+ spin_lock_bh(&ax->buflock);
+ memcpy(skb_put(skb,count), ax->rbuff, count);
+ spin_unlock_bh(&ax->buflock);
+ skb->protocol = ax25_type_trans(skb, ax->dev);
+ netif_rx(skb);
+ ax->dev->last_rx = jiffies;
+ ax->stats.rx_packets++;
+ ax->stats.rx_bytes += count;
}
-/* Free an AX25 channel. */
-static inline void ax_free(struct ax_disp *ax)
+static void kiss_unesc(struct mkiss *ax, unsigned char s)
{
- /* Free all AX25 frame buffers. */
- if (ax->rbuff)
- kfree(ax->rbuff);
- ax->rbuff = NULL;
- if (ax->xbuff)
- kfree(ax->xbuff);
- ax->xbuff = NULL;
- if (!test_and_clear_bit(AXF_INUSE, &ax->flags))
- printk(KERN_ERR "mkiss: %s: ax_free for already free unit.\n", ax->dev->name);
+ switch (s) {
+ case END:
+ /* drop keeptest bit = VSV */
+ if (test_bit(AXF_KEEPTEST, &ax->flags))
+ clear_bit(AXF_KEEPTEST, &ax->flags);
+
+ if (!test_and_clear_bit(AXF_ERROR, &ax->flags) && (ax->rcount > 2))
+ ax_bump(ax);
+
+ clear_bit(AXF_ESCAPE, &ax->flags);
+ ax->rcount = 0;
+ return;
+
+ case ESC:
+ set_bit(AXF_ESCAPE, &ax->flags);
+ return;
+ case ESC_ESC:
+ if (test_and_clear_bit(AXF_ESCAPE, &ax->flags))
+ s = ESC;
+ break;
+ case ESC_END:
+ if (test_and_clear_bit(AXF_ESCAPE, &ax->flags))
+ s = END;
+ break;
+ }
+
+ spin_lock_bh(&ax->buflock);
+ if (!test_bit(AXF_ERROR, &ax->flags)) {
+ if (ax->rcount < ax->buffsize) {
+ ax->rbuff[ax->rcount++] = s;
+ spin_unlock_bh(&ax->buflock);
+ return;
+ }
+
+ ax->stats.rx_over_errors++;
+ set_bit(AXF_ERROR, &ax->flags);
+ }
+ spin_unlock_bh(&ax->buflock);
+}
+
+static int ax_set_mac_address(struct net_device *dev, void *addr)
+{
+ struct sockaddr_ax25 *sa = addr;
+
+ spin_lock_irq(&dev->xmit_lock);
+ memcpy(dev->dev_addr, &sa->sax25_call, AX25_ADDR_LEN);
+ spin_unlock_irq(&dev->xmit_lock);
+
+ return 0;
}
-static void ax_changedmtu(struct ax_disp *ax)
+/*---------------------------------------------------------------------------*/
+
+static void ax_changedmtu(struct mkiss *ax)
{
struct net_device *dev = ax->dev;
unsigned char *xbuff, *rbuff, *oxbuff, *orbuff;
@@ -236,7 +348,8 @@ static void ax_changedmtu(struct ax_disp *ax)
rbuff = kmalloc(len + 4, GFP_ATOMIC);
if (xbuff == NULL || rbuff == NULL) {
- printk(KERN_ERR "mkiss: %s: unable to grow ax25 buffers, MTU change cancelled.\n",
+ printk(KERN_ERR "mkiss: %s: unable to grow ax25 buffers, "
+ "MTU change cancelled.\n",
ax->dev->name);
dev->mtu = ax->mtu;
if (xbuff != NULL)
@@ -258,7 +371,7 @@ static void ax_changedmtu(struct ax_disp *ax)
memcpy(ax->xbuff, ax->xhead, ax->xleft);
} else {
ax->xleft = 0;
- ax->tx_dropped++;
+ ax->stats.tx_dropped++;
}
}
@@ -269,7 +382,7 @@ static void ax_changedmtu(struct ax_disp *ax)
memcpy(ax->rbuff, orbuff, ax->rcount);
} else {
ax->rcount = 0;
- ax->rx_over_errors++;
+ ax->stats.rx_over_errors++;
set_bit(AXF_ERROR, &ax->flags);
}
}
@@ -279,72 +392,14 @@ static void ax_changedmtu(struct ax_disp *ax)
spin_unlock_bh(&ax->buflock);
- if (oxbuff != NULL)
- kfree(oxbuff);
- if (orbuff != NULL)
- kfree(orbuff);
-}
-
-
-/* Set the "sending" flag. This must be atomic. */
-static inline void ax_lock(struct ax_disp *ax)
-{
- netif_stop_queue(ax->dev);
-}
-
-
-/* Clear the "sending" flag. This must be atomic. */
-static inline void ax_unlock(struct ax_disp *ax)
-{
- netif_start_queue(ax->dev);
-}
-
-/* Send one completely decapsulated AX.25 packet to the AX.25 layer. */
-static void ax_bump(struct ax_disp *ax)
-{
- struct sk_buff *skb;
- int count;
-
- spin_lock_bh(&ax->buflock);
- if (ax->rbuff[0] > 0x0f) {
- if (ax->rbuff[0] & 0x20) {
- ax->crcmode = CRC_MODE_FLEX;
- if (check_crc_flex(ax->rbuff, ax->rcount) < 0) {
- ax->rx_errors++;
- return;
- }
- ax->rcount -= 2;
- /* dl9sau bugfix: the trailling two bytes flexnet crc
- * will not be passed to the kernel. thus we have
- * to correct the kissparm signature, because it
- * indicates a crc but there's none
- */
- *ax->rbuff &= ~0x20;
- }
- }
- spin_unlock_bh(&ax->buflock);
-
- count = ax->rcount;
-
- if ((skb = dev_alloc_skb(count)) == NULL) {
- printk(KERN_ERR "mkiss: %s: memory squeeze, dropping packet.\n", ax->dev->name);
- ax->rx_dropped++;
- return;
- }
-
- spin_lock_bh(&ax->buflock);
- memcpy(skb_put(skb,count), ax->rbuff, count);
- spin_unlock_bh(&ax->buflock);
- skb->protocol = ax25_type_trans(skb, ax->dev);
- netif_rx(skb);
- ax->dev->last_rx = jiffies;
- ax->rx_packets++;
- ax->rx_bytes+=count;
+ kfree(oxbuff);
+ kfree(orbuff);
}
/* Encapsulate one AX.25 packet and stuff into a TTY queue. */
-static void ax_encaps(struct ax_disp *ax, unsigned char *icp, int len)
+static void ax_encaps(struct net_device *dev, unsigned char *icp, int len)
{
+ struct mkiss *ax = netdev_priv(dev);
unsigned char *p;
int actual, count;
@@ -354,8 +409,8 @@ static void ax_encaps(struct ax_disp *ax, unsigned char *icp, int len)
if (len > ax->mtu) { /* Sigh, shouldn't occur BUT ... */
len = ax->mtu;
printk(KERN_ERR "mkiss: %s: truncating oversized transmit packet!\n", ax->dev->name);
- ax->tx_dropped++;
- ax_unlock(ax);
+ ax->stats.tx_dropped++;
+ netif_start_queue(dev);
return;
}
@@ -376,10 +431,11 @@ static void ax_encaps(struct ax_disp *ax, unsigned char *icp, int len)
break;
}
- ax->tty->flags |= (1 << TTY_DO_WRITE_WAKEUP);
+ set_bit(TTY_DO_WRITE_WAKEUP, &ax->tty->flags);
actual = ax->tty->driver->write(ax->tty, ax->xbuff, count);
- ax->tx_packets++;
- ax->tx_bytes+=actual;
+ ax->stats.tx_packets++;
+ ax->stats.tx_bytes += actual;
+
ax->dev->trans_start = jiffies;
ax->xleft = count - actual;
ax->xhead = ax->xbuff + actual;
@@ -387,37 +443,10 @@ static void ax_encaps(struct ax_disp *ax, unsigned char *icp, int len)
spin_unlock_bh(&ax->buflock);
}
-/*
- * Called by the driver when there's room for more data. If we have
- * more packets to send, we send them here.
- */
-static void ax25_write_wakeup(struct tty_struct *tty)
-{
- int actual;
- struct ax_disp *ax = (struct ax_disp *) tty->disc_data;
-
- /* First make sure we're connected. */
- if (ax == NULL || ax->magic != AX25_MAGIC || !netif_running(ax->dev))
- return;
- if (ax->xleft <= 0) {
- /* Now serial buffer is almost free & we can start
- * transmission of another packet
- */
- tty->flags &= ~(1 << TTY_DO_WRITE_WAKEUP);
-
- netif_wake_queue(ax->dev);
- return;
- }
-
- actual = tty->driver->write(tty, ax->xhead, ax->xleft);
- ax->xleft -= actual;
- ax->xhead += actual;
-}
-
/* Encapsulate an AX.25 packet and kick it into a TTY queue. */
static int ax_xmit(struct sk_buff *skb, struct net_device *dev)
{
- struct ax_disp *ax = netdev_priv(dev);
+ struct mkiss *ax = netdev_priv(dev);
if (!netif_running(dev)) {
printk(KERN_ERR "mkiss: %s: xmit call when iface is down\n", dev->name);
@@ -429,7 +458,7 @@ static int ax_xmit(struct sk_buff *skb, struct net_device *dev)
* May be we must check transmitter timeout here ?
* 14 Oct 1994 Dmitry Gorodchanin.
*/
- if (jiffies - dev->trans_start < 20 * HZ) {
+ if (time_before(jiffies, dev->trans_start + 20 * HZ)) {
/* 20 sec timeout not reached */
return 1;
}
@@ -439,20 +468,30 @@ static int ax_xmit(struct sk_buff *skb, struct net_device *dev)
"bad line quality" : "driver error");
ax->xleft = 0;
- ax->tty->flags &= ~(1 << TTY_DO_WRITE_WAKEUP);
- ax_unlock(ax);
+ clear_bit(TTY_DO_WRITE_WAKEUP, &ax->tty->flags);
+ netif_start_queue(dev);
}
/* We were not busy, so we are now... :-) */
if (skb != NULL) {
- ax_lock(ax);
- ax_encaps(ax, skb->data, skb->len);
+ netif_stop_queue(dev);
+ ax_encaps(dev, skb->data, skb->len);
kfree_skb(skb);
}
return 0;
}
+static int ax_open_dev(struct net_device *dev)
+{
+ struct mkiss *ax = netdev_priv(dev);
+
+ if (ax->tty == NULL)
+ return -ENODEV;
+
+ return 0;
+}
+
#if defined(CONFIG_AX25) || defined(CONFIG_AX25_MODULE)
/* Return the frame type ID */
@@ -481,7 +520,7 @@ static int ax_rebuild_header(struct sk_buff *skb)
/* Open the low-level part of the AX25 channel. Easy! */
static int ax_open(struct net_device *dev)
{
- struct ax_disp *ax = netdev_priv(dev);
+ struct mkiss *ax = netdev_priv(dev);
unsigned long len;
if (ax->tty == NULL)
@@ -518,7 +557,6 @@ static int ax_open(struct net_device *dev)
spin_lock_init(&ax->buflock);
- netif_start_queue(dev);
return 0;
noxbuff:
@@ -532,68 +570,100 @@ norbuff:
/* Close the low-level part of the AX25 channel. Easy! */
static int ax_close(struct net_device *dev)
{
- struct ax_disp *ax = netdev_priv(dev);
+ struct mkiss *ax = netdev_priv(dev);
- if (ax->tty == NULL)
- return -EBUSY;
-
- ax->tty->flags &= ~(1 << TTY_DO_WRITE_WAKEUP);
+ if (ax->tty)
+ clear_bit(TTY_DO_WRITE_WAKEUP, &ax->tty->flags);
netif_stop_queue(dev);
return 0;
}
-static int ax25_receive_room(struct tty_struct *tty)
+static struct net_device_stats *ax_get_stats(struct net_device *dev)
{
- return 65536; /* We can handle an infinite amount of data. :-) */
+ struct mkiss *ax = netdev_priv(dev);
+
+ return &ax->stats;
+}
+
+static void ax_setup(struct net_device *dev)
+{
+ static char ax25_bcast[AX25_ADDR_LEN] =
+ {'Q'<<1,'S'<<1,'T'<<1,' '<<1,' '<<1,' '<<1,'0'<<1};
+ static char ax25_test[AX25_ADDR_LEN] =
+ {'L'<<1,'I'<<1,'N'<<1,'U'<<1,'X'<<1,' '<<1,'1'<<1};
+
+ /* Finish setting up the DEVICE info. */
+ dev->mtu = AX_MTU;
+ dev->hard_start_xmit = ax_xmit;
+ dev->open = ax_open_dev;
+ dev->stop = ax_close;
+ dev->get_stats = ax_get_stats;
+ dev->set_mac_address = ax_set_mac_address;
+ dev->hard_header_len = 0;
+ dev->addr_len = 0;
+ dev->type = ARPHRD_AX25;
+ dev->tx_queue_len = 10;
+ dev->hard_header = ax_header;
+ dev->rebuild_header = ax_rebuild_header;
+
+ memcpy(dev->broadcast, ax25_bcast, AX25_ADDR_LEN);
+ memcpy(dev->dev_addr, ax25_test, AX25_ADDR_LEN);
+
+ dev->flags = IFF_BROADCAST | IFF_MULTICAST;
}
/*
- * Handle the 'receiver data ready' interrupt.
- * This function is called by the 'tty_io' module in the kernel when
- * a block of data has been received, which can now be decapsulated
- * and sent on to the AX.25 layer for further processing.
+ * We have a potential race on dereferencing tty->disc_data, because the tty
+ * layer provides no locking at all - thus one cpu could be running
+ * sixpack_receive_buf while another calls sixpack_close, which zeroes
+ * tty->disc_data and frees the memory that sixpack_receive_buf is using. The
+ * best way to fix this is to use a rwlock in the tty struct, but for now we
+ * use a single global rwlock for all ttys in ppp line discipline.
*/
-static void ax25_receive_buf(struct tty_struct *tty, const unsigned char *cp, char *fp, int count)
+static rwlock_t disc_data_lock = RW_LOCK_UNLOCKED;
+
+static struct mkiss *mkiss_get(struct tty_struct *tty)
{
- struct ax_disp *ax = (struct ax_disp *) tty->disc_data;
+ struct mkiss *ax;
- if (ax == NULL || ax->magic != AX25_MAGIC || !netif_running(ax->dev))
- return;
+ read_lock(&disc_data_lock);
+ ax = tty->disc_data;
+ if (ax)
+ atomic_inc(&ax->refcnt);
+ read_unlock(&disc_data_lock);
- /*
- * Argh! mtu change time! - costs us the packet part received
- * at the change
- */
- if (ax->mtu != ax->dev->mtu + 73)
- ax_changedmtu(ax);
-
- /* Read the characters out of the buffer */
- while (count--) {
- if (fp != NULL && *fp++) {
- if (!test_and_set_bit(AXF_ERROR, &ax->flags))
- ax->rx_errors++;
- cp++;
- continue;
- }
+ return ax;
+}
- kiss_unesc(ax, *cp++);
- }
+static void mkiss_put(struct mkiss *ax)
+{
+ if (atomic_dec_and_test(&ax->refcnt))
+ up(&ax->dead_sem);
}
-static int ax25_open(struct tty_struct *tty)
+static int mkiss_open(struct tty_struct *tty)
{
- struct ax_disp *ax = (struct ax_disp *) tty->disc_data;
+ struct net_device *dev;
+ struct mkiss *ax;
int err;
- /* First make sure we're not already connected. */
- if (ax && ax->magic == AX25_MAGIC)
- return -EEXIST;
+ if (!capable(CAP_NET_ADMIN))
+ return -EPERM;
- /* OK. Find a free AX25 channel to use. */
- if ((ax = ax_alloc()) == NULL)
- return -ENFILE;
+ dev = alloc_netdev(sizeof(struct mkiss), "ax%d", ax_setup);
+ if (!dev) {
+ err = -ENOMEM;
+ goto out;
+ }
+
+ ax = netdev_priv(dev);
+ ax->dev = dev;
+
+ spin_lock_init(&ax->buflock);
+ atomic_set(&ax->refcnt, 1);
+ init_MUTEX_LOCKED(&ax->dead_sem);
ax->tty = tty;
tty->disc_data = ax;
@@ -602,283 +672,212 @@ static int ax25_open(struct tty_struct *tty)
tty->driver->flush_buffer(tty);
/* Restore default settings */
- ax->dev->type = ARPHRD_AX25;
+ dev->type = ARPHRD_AX25;
/* Perform the low-level AX25 initialization. */
- if ((err = ax_open(ax->dev)))
- return err;
+ if ((err = ax_open(ax->dev))) {
+ goto out_free_netdev;
+ }
- /* Done. We have linked the TTY line to a channel. */
- return ax->dev->base_addr;
-}
+ if (register_netdev(dev))
+ goto out_free_buffers;
-static void ax25_close(struct tty_struct *tty)
-{
- struct ax_disp *ax = (struct ax_disp *) tty->disc_data;
+ netif_start_queue(dev);
- /* First make sure we're connected. */
- if (ax == NULL || ax->magic != AX25_MAGIC)
- return;
+ /* Done. We have linked the TTY line to a channel. */
+ return 0;
- unregister_netdev(ax->dev);
+out_free_buffers:
+ kfree(ax->rbuff);
+ kfree(ax->xbuff);
- tty->disc_data = NULL;
- ax->tty = NULL;
+out_free_netdev:
+ free_netdev(dev);
- ax_free(ax);
+out:
+ return err;
}
-
-static struct net_device_stats *ax_get_stats(struct net_device *dev)
+static void mkiss_close(struct tty_struct *tty)
{
- static struct net_device_stats stats;
- struct ax_disp *ax = netdev_priv(dev);
-
- memset(&stats, 0, sizeof(struct net_device_stats));
-
- stats.rx_packets = ax->rx_packets;
- stats.tx_packets = ax->tx_packets;
- stats.rx_bytes = ax->rx_bytes;
- stats.tx_bytes = ax->tx_bytes;
- stats.rx_dropped = ax->rx_dropped;
- stats.tx_dropped = ax->tx_dropped;
- stats.tx_errors = ax->tx_errors;
- stats.rx_errors = ax->rx_errors;
- stats.rx_over_errors = ax->rx_over_errors;
-
- return &stats;
-}
+ struct mkiss *ax;
+ write_lock(&disc_data_lock);
+ ax = tty->disc_data;
+ tty->disc_data = NULL;
+ write_unlock(&disc_data_lock);
-/************************************************************************
- * STANDARD ENCAPSULATION *
- ************************************************************************/
-
-static int kiss_esc(unsigned char *s, unsigned char *d, int len)
-{
- unsigned char *ptr = d;
- unsigned char c;
+ if (ax == 0)
+ return;
/*
- * Send an initial END character to flush out any
- * data that may have accumulated in the receiver
- * due to line noise.
+ * We have now ensured that nobody can start using ap from now on, but
+ * we have to wait for all existing users to finish.
*/
+ if (!atomic_dec_and_test(&ax->refcnt))
+ down(&ax->dead_sem);
- *ptr++ = END;
-
- while (len-- > 0) {
- switch (c = *s++) {
- case END:
- *ptr++ = ESC;
- *ptr++ = ESC_END;
- break;
- case ESC:
- *ptr++ = ESC;
- *ptr++ = ESC_ESC;
- break;
- default:
- *ptr++ = c;
- break;
- }
- }
+ unregister_netdev(ax->dev);
- *ptr++ = END;
+ /* Free all AX25 frame buffers. */
+ kfree(ax->rbuff);
+ kfree(ax->xbuff);
- return ptr - d;
+ ax->tty = NULL;
}
-/*
- * MW:
- * OK its ugly, but tell me a better solution without copying the
- * packet to a temporary buffer :-)
- */
-static int kiss_esc_crc(unsigned char *s, unsigned char *d, unsigned short crc, int len)
+/* Perform I/O control on an active ax25 channel. */
+static int mkiss_ioctl(struct tty_struct *tty, struct file *file,
+ unsigned int cmd, unsigned long arg)
{
- unsigned char *ptr = d;
- unsigned char c=0;
-
- *ptr++ = END;
- while (len > 0) {
- if (len > 2)
- c = *s++;
- else if (len > 1)
- c = crc >> 8;
- else if (len > 0)
- c = crc & 0xff;
+ struct mkiss *ax = mkiss_get(tty);
+ struct net_device *dev = ax->dev;
+ unsigned int tmp, err;
- len--;
+ /* First make sure we're connected. */
+ if (ax == NULL)
+ return -ENXIO;
- switch (c) {
- case END:
- *ptr++ = ESC;
- *ptr++ = ESC_END;
- break;
- case ESC:
- *ptr++ = ESC;
- *ptr++ = ESC_ESC;
- break;
- default:
- *ptr++ = c;
- break;
+ switch (cmd) {
+ case SIOCGIFNAME:
+ err = copy_to_user((void __user *) arg, ax->dev->name,
+ strlen(ax->dev->name) + 1) ? -EFAULT : 0;
+ break;
+
+ case SIOCGIFENCAP:
+ err = put_user(4, (int __user *) arg);
+ break;
+
+ case SIOCSIFENCAP:
+ if (get_user(tmp, (int __user *) arg)) {
+ err = -EFAULT;
+ break;
}
- }
- *ptr++ = END;
- return ptr - d;
-}
-static void kiss_unesc(struct ax_disp *ax, unsigned char s)
-{
- switch (s) {
- case END:
- /* drop keeptest bit = VSV */
- if (test_bit(AXF_KEEPTEST, &ax->flags))
- clear_bit(AXF_KEEPTEST, &ax->flags);
+ ax->mode = tmp;
+ dev->addr_len = AX25_ADDR_LEN;
+ dev->hard_header_len = AX25_KISS_HEADER_LEN +
+ AX25_MAX_HEADER_LEN + 3;
+ dev->type = ARPHRD_AX25;
- if (!test_and_clear_bit(AXF_ERROR, &ax->flags) && (ax->rcount > 2))
- ax_bump(ax);
+ err = 0;
+ break;
- clear_bit(AXF_ESCAPE, &ax->flags);
- ax->rcount = 0;
- return;
+ case SIOCSIFHWADDR: {
+ char addr[AX25_ADDR_LEN];
+printk(KERN_INFO "In SIOCSIFHWADDR");
- case ESC:
- set_bit(AXF_ESCAPE, &ax->flags);
- return;
- case ESC_ESC:
- if (test_and_clear_bit(AXF_ESCAPE, &ax->flags))
- s = ESC;
+ if (copy_from_user(&addr,
+ (void __user *) arg, AX25_ADDR_LEN)) {
+ err = -EFAULT;
break;
- case ESC_END:
- if (test_and_clear_bit(AXF_ESCAPE, &ax->flags))
- s = END;
- break;
- }
-
- spin_lock_bh(&ax->buflock);
- if (!test_bit(AXF_ERROR, &ax->flags)) {
- if (ax->rcount < ax->buffsize) {
- ax->rbuff[ax->rcount++] = s;
- spin_unlock_bh(&ax->buflock);
- return;
}
- ax->rx_over_errors++;
- set_bit(AXF_ERROR, &ax->flags);
+ spin_lock_irq(&dev->xmit_lock);
+ memcpy(dev->dev_addr, addr, AX25_ADDR_LEN);
+ spin_unlock_irq(&dev->xmit_lock);
+
+ err = 0;
+ break;
+ }
+ default:
+ err = -ENOIOCTLCMD;
}
- spin_unlock_bh(&ax->buflock);
-}
+ mkiss_put(ax);
-static int ax_set_mac_address(struct net_device *dev, void __user *addr)
-{
- if (copy_from_user(dev->dev_addr, addr, AX25_ADDR_LEN))
- return -EFAULT;
- return 0;
+ return err;
}
-static int ax_set_dev_mac_address(struct net_device *dev, void *addr)
+/*
+ * Handle the 'receiver data ready' interrupt.
+ * This function is called by the 'tty_io' module in the kernel when
+ * a block of data has been received, which can now be decapsulated
+ * and sent on to the AX.25 layer for further processing.
+ */
+static void mkiss_receive_buf(struct tty_struct *tty, const unsigned char *cp,
+ char *fp, int count)
{
- struct sockaddr *sa = addr;
-
- memcpy(dev->dev_addr, sa->sa_data, AX25_ADDR_LEN);
+ struct mkiss *ax = mkiss_get(tty);
- return 0;
-}
-
-
-/* Perform I/O control on an active ax25 channel. */
-static int ax25_disp_ioctl(struct tty_struct *tty, void *file, int cmd, void __user *arg)
-{
- struct ax_disp *ax = (struct ax_disp *) tty->disc_data;
- unsigned int tmp;
+ if (!ax)
+ return;
- /* First make sure we're connected. */
- if (ax == NULL || ax->magic != AX25_MAGIC)
- return -EINVAL;
+ /*
+ * Argh! mtu change time! - costs us the packet part received
+ * at the change
+ */
+ if (ax->mtu != ax->dev->mtu + 73)
+ ax_changedmtu(ax);
- switch (cmd) {
- case SIOCGIFNAME:
- if (copy_to_user(arg, ax->dev->name, strlen(ax->dev->name) + 1))
- return -EFAULT;
- return 0;
-
- case SIOCGIFENCAP:
- return put_user(4, (int __user *)arg);
-
- case SIOCSIFENCAP:
- if (get_user(tmp, (int __user *)arg))
- return -EFAULT;
- ax->mode = tmp;
- ax->dev->addr_len = AX25_ADDR_LEN; /* sizeof an AX.25 addr */
- ax->dev->hard_header_len = AX25_KISS_HEADER_LEN + AX25_MAX_HEADER_LEN + 3;
- ax->dev->type = ARPHRD_AX25;
- return 0;
-
- case SIOCSIFHWADDR:
- return ax_set_mac_address(ax->dev, arg);
+ /* Read the characters out of the buffer */
+ while (count--) {
+ if (fp != NULL && *fp++) {
+ if (!test_and_set_bit(AXF_ERROR, &ax->flags))
+ ax->stats.rx_errors++;
+ cp++;
+ continue;
+ }
- default:
- return -ENOIOCTLCMD;
+ kiss_unesc(ax, *cp++);
}
+
+ mkiss_put(ax);
+ if (test_and_clear_bit(TTY_THROTTLED, &tty->flags)
+ && tty->driver->unthrottle)
+ tty->driver->unthrottle(tty);
}
-static int ax_open_dev(struct net_device *dev)
+static int mkiss_receive_room(struct tty_struct *tty)
{
- struct ax_disp *ax = netdev_priv(dev);
-
- if (ax->tty == NULL)
- return -ENODEV;
-
- return 0;
+ return 65536; /* We can handle an infinite amount of data. :-) */
}
-
-/* Initialize the driver. Called by network startup. */
-static int ax25_init(struct net_device *dev)
+/*
+ * Called by the driver when there's room for more data. If we have
+ * more packets to send, we send them here.
+ */
+static void mkiss_write_wakeup(struct tty_struct *tty)
{
- struct ax_disp *ax = netdev_priv(dev);
-
- static char ax25_bcast[AX25_ADDR_LEN] =
- {'Q'<<1,'S'<<1,'T'<<1,' '<<1,' '<<1,' '<<1,'0'<<1};
- static char ax25_test[AX25_ADDR_LEN] =
- {'L'<<1,'I'<<1,'N'<<1,'U'<<1,'X'<<1,' '<<1,'1'<<1};
-
- if (ax == NULL) /* Allocation failed ?? */
- return -ENODEV;
+ struct mkiss *ax = mkiss_get(tty);
+ int actual;
- /* Set up the "AX25 Control Block". (And clear statistics) */
- memset(ax, 0, sizeof (struct ax_disp));
- ax->magic = AX25_MAGIC;
- ax->dev = dev;
+ if (!ax)
+ return;
- /* Finish setting up the DEVICE info. */
- dev->mtu = AX_MTU;
- dev->hard_start_xmit = ax_xmit;
- dev->open = ax_open_dev;
- dev->stop = ax_close;
- dev->get_stats = ax_get_stats;
- dev->set_mac_address = ax_set_dev_mac_address;
- dev->hard_header_len = 0;
- dev->addr_len = 0;
- dev->type = ARPHRD_AX25;
- dev->tx_queue_len = 10;
- dev->hard_header = ax_header;
- dev->rebuild_header = ax_rebuild_header;
+ if (ax->xleft <= 0) {
+ /* Now serial buffer is almost free & we can start
+ * transmission of another packet
+ */
+ clear_bit(TTY_DO_WRITE_WAKEUP, &tty->flags);
- memcpy(dev->broadcast, ax25_bcast, AX25_ADDR_LEN);
- memcpy(dev->dev_addr, ax25_test, AX25_ADDR_LEN);
+ netif_wake_queue(ax->dev);
+ goto out;
+ }
- /* New-style flags. */
- dev->flags = IFF_BROADCAST | IFF_MULTICAST;
+ actual = tty->driver->write(tty, ax->xhead, ax->xleft);
+ ax->xleft -= actual;
+ ax->xhead += actual;
- return 0;
+out:
+ mkiss_put(ax);
}
+static struct tty_ldisc ax_ldisc = {
+ .magic = TTY_LDISC_MAGIC,
+ .name = "mkiss",
+ .open = mkiss_open,
+ .close = mkiss_close,
+ .ioctl = mkiss_ioctl,
+ .receive_buf = mkiss_receive_buf,
+ .receive_room = mkiss_receive_room,
+ .write_wakeup = mkiss_write_wakeup
+};
-/* ******************************************************************** */
-/* * Init MKISS driver * */
-/* ******************************************************************** */
+static char banner[] __initdata = KERN_INFO \
+ "mkiss: AX.25 Multikiss, Hans Albas PE1AYX\n";
+static char msg_regfail[] __initdata = KERN_ERR \
+ "mkiss: can't register line discipline (err = %d)\n";
static int __init mkiss_init_driver(void)
{
@@ -886,64 +885,27 @@ static int __init mkiss_init_driver(void)
printk(banner);
- if (ax25_maxdev < 4)
- ax25_maxdev = 4; /* Sanity */
+ if ((status = tty_register_ldisc(N_AX25, &ax_ldisc)) != 0)
+ printk(msg_regfail);
- if ((ax25_ctrls = kmalloc(sizeof(void *) * ax25_maxdev, GFP_KERNEL)) == NULL) {
- printk(KERN_ERR "mkiss: Can't allocate ax25_ctrls[] array!\n");
- return -ENOMEM;
- }
-
- /* Clear the pointer array, we allocate devices when we need them */
- memset(ax25_ctrls, 0, sizeof(void*) * ax25_maxdev); /* Pointers */
-
- /* Fill in our line protocol discipline, and register it */
- ax_ldisc.magic = TTY_LDISC_MAGIC;
- ax_ldisc.name = "mkiss";
- ax_ldisc.open = ax25_open;
- ax_ldisc.close = ax25_close;
- ax_ldisc.ioctl = (int (*)(struct tty_struct *, struct file *,
- unsigned int, unsigned long))ax25_disp_ioctl;
- ax_ldisc.receive_buf = ax25_receive_buf;
- ax_ldisc.receive_room = ax25_receive_room;
- ax_ldisc.write_wakeup = ax25_write_wakeup;
-
- if ((status = tty_register_ldisc(N_AX25, &ax_ldisc)) != 0) {
- printk(KERN_ERR "mkiss: can't register line discipline (err = %d)\n", status);
- kfree(ax25_ctrls);
- }
return status;
}
+static const char msg_unregfail[] __exitdata = KERN_ERR \
+ "mkiss: can't unregister line discipline (err = %d)\n";
+
static void __exit mkiss_exit_driver(void)
{
- int i;
-
- for (i = 0; i < ax25_maxdev; i++) {
- if (ax25_ctrls[i]) {
- /*
- * VSV = if dev->start==0, then device
- * unregistered while close proc.
- */
- if (netif_running(&ax25_ctrls[i]->dev))
- unregister_netdev(&ax25_ctrls[i]->dev);
- kfree(ax25_ctrls[i]);
- }
- }
+ int ret;
- kfree(ax25_ctrls);
- ax25_ctrls = NULL;
-
- if ((i = tty_unregister_ldisc(N_AX25)))
- printk(KERN_ERR "mkiss: can't unregister line discipline (err = %d)\n", i);
+ if ((ret = tty_unregister_ldisc(N_AX25)))
+ printk(msg_unregfail, ret);
}
-MODULE_AUTHOR("Hans Albas PE1AYX <hans@esrac.ele.tue.nl>");
+MODULE_AUTHOR("Ralf Baechle DL5RB <ralf@linux-mips.org>");
MODULE_DESCRIPTION("KISS driver for AX.25 over TTYs");
-MODULE_PARM(ax25_maxdev, "i");
-MODULE_PARM_DESC(ax25_maxdev, "number of MKISS devices");
MODULE_LICENSE("GPL");
MODULE_ALIAS_LDISC(N_AX25);
+
module_init(mkiss_init_driver);
module_exit(mkiss_exit_driver);
-
diff --git a/drivers/net/ibm_emac/ibm_emac_core.c b/drivers/net/ibm_emac/ibm_emac_core.c
index c7fb3675c09..0de3bb90617 100644
--- a/drivers/net/ibm_emac/ibm_emac_core.c
+++ b/drivers/net/ibm_emac/ibm_emac_core.c
@@ -1253,7 +1253,7 @@ static int emac_init_tah(struct ocp_enet_private *fep)
TAH_MR_CVR | TAH_MR_ST_768 | TAH_MR_TFS_10KB | TAH_MR_DTFP |
TAH_MR_DIG);
- iounmap(&tahp);
+ iounmap(tahp);
return 0;
}
diff --git a/drivers/net/ibmveth.c b/drivers/net/ibmveth.c
index c39b0609742..32d5fabd4b1 100644
--- a/drivers/net/ibmveth.c
+++ b/drivers/net/ibmveth.c
@@ -1144,7 +1144,7 @@ static void ibmveth_proc_unregister_driver(void)
static struct vio_device_id ibmveth_device_table[] __devinitdata= {
{ "network", "IBM,l-lan"},
- { 0,}
+ { "", "" }
};
MODULE_DEVICE_TABLE(vio, ibmveth_device_table);
diff --git a/drivers/net/iseries_veth.c b/drivers/net/iseries_veth.c
index 55af32e9bf0..183ba97785b 100644
--- a/drivers/net/iseries_veth.c
+++ b/drivers/net/iseries_veth.c
@@ -1370,7 +1370,7 @@ static int veth_probe(struct vio_dev *vdev, const struct vio_device_id *id)
*/
static struct vio_device_id veth_device_table[] __devinitdata = {
{ "vlan", "" },
- { NULL, NULL }
+ { "", "" }
};
MODULE_DEVICE_TABLE(vio, veth_device_table);
diff --git a/drivers/net/ixgb/ixgb.h b/drivers/net/ixgb/ixgb.h
index f8d3385c784..c83271b3862 100644
--- a/drivers/net/ixgb/ixgb.h
+++ b/drivers/net/ixgb/ixgb.h
@@ -119,7 +119,7 @@ struct ixgb_adapter;
* so a DMA handle can be stored along with the buffer */
struct ixgb_buffer {
struct sk_buff *skb;
- uint64_t dma;
+ dma_addr_t dma;
unsigned long time_stamp;
uint16_t length;
uint16_t next_to_watch;
diff --git a/drivers/net/ixgb/ixgb_ee.c b/drivers/net/ixgb/ixgb_ee.c
index 3aae110c556..661a46b95a6 100644
--- a/drivers/net/ixgb/ixgb_ee.c
+++ b/drivers/net/ixgb/ixgb_ee.c
@@ -565,24 +565,6 @@ ixgb_get_ee_mac_addr(struct ixgb_hw *hw,
}
}
-/******************************************************************************
- * return the compatibility flags from EEPROM
- *
- * hw - Struct containing variables accessed by shared code
- *
- * Returns:
- * compatibility flags if EEPROM contents are valid, 0 otherwise
- ******************************************************************************/
-uint16_t
-ixgb_get_ee_compatibility(struct ixgb_hw *hw)
-{
- struct ixgb_ee_map_type *ee_map = (struct ixgb_ee_map_type *)hw->eeprom;
-
- if(ixgb_check_and_get_eeprom_data(hw) == TRUE)
- return (le16_to_cpu(ee_map->compatibility));
-
- return(0);
-}
/******************************************************************************
* return the Printed Board Assembly number from EEPROM
@@ -602,81 +584,6 @@ ixgb_get_ee_pba_number(struct ixgb_hw *hw)
return(0);
}
-/******************************************************************************
- * return the Initialization Control Word 1 from EEPROM
- *
- * hw - Struct containing variables accessed by shared code
- *
- * Returns:
- * Initialization Control Word 1 if EEPROM contents are valid, 0 otherwise
- ******************************************************************************/
-uint16_t
-ixgb_get_ee_init_ctrl_reg_1(struct ixgb_hw *hw)
-{
- struct ixgb_ee_map_type *ee_map = (struct ixgb_ee_map_type *)hw->eeprom;
-
- if(ixgb_check_and_get_eeprom_data(hw) == TRUE)
- return (le16_to_cpu(ee_map->init_ctrl_reg_1));
-
- return(0);
-}
-
-/******************************************************************************
- * return the Initialization Control Word 2 from EEPROM
- *
- * hw - Struct containing variables accessed by shared code
- *
- * Returns:
- * Initialization Control Word 2 if EEPROM contents are valid, 0 otherwise
- ******************************************************************************/
-uint16_t
-ixgb_get_ee_init_ctrl_reg_2(struct ixgb_hw *hw)
-{
- struct ixgb_ee_map_type *ee_map = (struct ixgb_ee_map_type *)hw->eeprom;
-
- if(ixgb_check_and_get_eeprom_data(hw) == TRUE)
- return (le16_to_cpu(ee_map->init_ctrl_reg_2));
-
- return(0);
-}
-
-/******************************************************************************
- * return the Subsystem Id from EEPROM
- *
- * hw - Struct containing variables accessed by shared code
- *
- * Returns:
- * Subsystem Id if EEPROM contents are valid, 0 otherwise
- ******************************************************************************/
-uint16_t
-ixgb_get_ee_subsystem_id(struct ixgb_hw *hw)
-{
- struct ixgb_ee_map_type *ee_map = (struct ixgb_ee_map_type *)hw->eeprom;
-
- if(ixgb_check_and_get_eeprom_data(hw) == TRUE)
- return (le16_to_cpu(ee_map->subsystem_id));
-
- return(0);
-}
-
-/******************************************************************************
- * return the Sub Vendor Id from EEPROM
- *
- * hw - Struct containing variables accessed by shared code
- *
- * Returns:
- * Sub Vendor Id if EEPROM contents are valid, 0 otherwise
- ******************************************************************************/
-uint16_t
-ixgb_get_ee_subvendor_id(struct ixgb_hw *hw)
-{
- struct ixgb_ee_map_type *ee_map = (struct ixgb_ee_map_type *)hw->eeprom;
-
- if(ixgb_check_and_get_eeprom_data(hw) == TRUE)
- return (le16_to_cpu(ee_map->subvendor_id));
-
- return(0);
-}
/******************************************************************************
* return the Device Id from EEPROM
@@ -694,81 +601,6 @@ ixgb_get_ee_device_id(struct ixgb_hw *hw)
if(ixgb_check_and_get_eeprom_data(hw) == TRUE)
return (le16_to_cpu(ee_map->device_id));
- return(0);
-}
-
-/******************************************************************************
- * return the Vendor Id from EEPROM
- *
- * hw - Struct containing variables accessed by shared code
- *
- * Returns:
- * Device Id if EEPROM contents are valid, 0 otherwise
- ******************************************************************************/
-uint16_t
-ixgb_get_ee_vendor_id(struct ixgb_hw *hw)
-{
- struct ixgb_ee_map_type *ee_map = (struct ixgb_ee_map_type *)hw->eeprom;
-
- if(ixgb_check_and_get_eeprom_data(hw) == TRUE)
- return (le16_to_cpu(ee_map->vendor_id));
-
- return(0);
-}
-
-/******************************************************************************
- * return the Software Defined Pins Register from EEPROM
- *
- * hw - Struct containing variables accessed by shared code
- *
- * Returns:
- * SDP Register if EEPROM contents are valid, 0 otherwise
- ******************************************************************************/
-uint16_t
-ixgb_get_ee_swdpins_reg(struct ixgb_hw *hw)
-{
- struct ixgb_ee_map_type *ee_map = (struct ixgb_ee_map_type *)hw->eeprom;
-
- if(ixgb_check_and_get_eeprom_data(hw) == TRUE)
- return (le16_to_cpu(ee_map->swdpins_reg));
-
- return(0);
+ return (0);
}
-/******************************************************************************
- * return the D3 Power Management Bits from EEPROM
- *
- * hw - Struct containing variables accessed by shared code
- *
- * Returns:
- * D3 Power Management Bits if EEPROM contents are valid, 0 otherwise
- ******************************************************************************/
-uint8_t
-ixgb_get_ee_d3_power(struct ixgb_hw *hw)
-{
- struct ixgb_ee_map_type *ee_map = (struct ixgb_ee_map_type *)hw->eeprom;
-
- if(ixgb_check_and_get_eeprom_data(hw) == TRUE)
- return (le16_to_cpu(ee_map->d3_power));
-
- return(0);
-}
-
-/******************************************************************************
- * return the D0 Power Management Bits from EEPROM
- *
- * hw - Struct containing variables accessed by shared code
- *
- * Returns:
- * D0 Power Management Bits if EEPROM contents are valid, 0 otherwise
- ******************************************************************************/
-uint8_t
-ixgb_get_ee_d0_power(struct ixgb_hw *hw)
-{
- struct ixgb_ee_map_type *ee_map = (struct ixgb_ee_map_type *)hw->eeprom;
-
- if(ixgb_check_and_get_eeprom_data(hw) == TRUE)
- return (le16_to_cpu(ee_map->d0_power));
-
- return(0);
-}
diff --git a/drivers/net/ixgb/ixgb_ethtool.c b/drivers/net/ixgb/ixgb_ethtool.c
index 3fa113854ee..9d026ed77dd 100644
--- a/drivers/net/ixgb/ixgb_ethtool.c
+++ b/drivers/net/ixgb/ixgb_ethtool.c
@@ -98,10 +98,10 @@ static struct ixgb_stats ixgb_gstrings_stats[] = {
static int
ixgb_get_settings(struct net_device *netdev, struct ethtool_cmd *ecmd)
{
- struct ixgb_adapter *adapter = netdev->priv;
+ struct ixgb_adapter *adapter = netdev_priv(netdev);
ecmd->supported = (SUPPORTED_10000baseT_Full | SUPPORTED_FIBRE);
- ecmd->advertising = (SUPPORTED_10000baseT_Full | SUPPORTED_FIBRE);
+ ecmd->advertising = (ADVERTISED_10000baseT_Full | ADVERTISED_FIBRE);
ecmd->port = PORT_FIBRE;
ecmd->transceiver = XCVR_EXTERNAL;
@@ -120,7 +120,7 @@ ixgb_get_settings(struct net_device *netdev, struct ethtool_cmd *ecmd)
static int
ixgb_set_settings(struct net_device *netdev, struct ethtool_cmd *ecmd)
{
- struct ixgb_adapter *adapter = netdev->priv;
+ struct ixgb_adapter *adapter = netdev_priv(netdev);
if(ecmd->autoneg == AUTONEG_ENABLE ||
ecmd->speed + ecmd->duplex != SPEED_10000 + DUPLEX_FULL)
@@ -130,6 +130,12 @@ ixgb_set_settings(struct net_device *netdev, struct ethtool_cmd *ecmd)
ixgb_down(adapter, TRUE);
ixgb_reset(adapter);
ixgb_up(adapter);
+ /* be optimistic about our link, since we were up before */
+ adapter->link_speed = 10000;
+ adapter->link_duplex = FULL_DUPLEX;
+ netif_carrier_on(netdev);
+ netif_wake_queue(netdev);
+
} else
ixgb_reset(adapter);
@@ -140,7 +146,7 @@ static void
ixgb_get_pauseparam(struct net_device *netdev,
struct ethtool_pauseparam *pause)
{
- struct ixgb_adapter *adapter = netdev->priv;
+ struct ixgb_adapter *adapter = netdev_priv(netdev);
struct ixgb_hw *hw = &adapter->hw;
pause->autoneg = AUTONEG_DISABLE;
@@ -159,7 +165,7 @@ static int
ixgb_set_pauseparam(struct net_device *netdev,
struct ethtool_pauseparam *pause)
{
- struct ixgb_adapter *adapter = netdev->priv;
+ struct ixgb_adapter *adapter = netdev_priv(netdev);
struct ixgb_hw *hw = &adapter->hw;
if(pause->autoneg == AUTONEG_ENABLE)
@@ -177,6 +183,11 @@ ixgb_set_pauseparam(struct net_device *netdev,
if(netif_running(adapter->netdev)) {
ixgb_down(adapter, TRUE);
ixgb_up(adapter);
+ /* be optimistic about our link, since we were up before */
+ adapter->link_speed = 10000;
+ adapter->link_duplex = FULL_DUPLEX;
+ netif_carrier_on(netdev);
+ netif_wake_queue(netdev);
} else
ixgb_reset(adapter);
@@ -186,19 +197,26 @@ ixgb_set_pauseparam(struct net_device *netdev,
static uint32_t
ixgb_get_rx_csum(struct net_device *netdev)
{
- struct ixgb_adapter *adapter = netdev->priv;
+ struct ixgb_adapter *adapter = netdev_priv(netdev);
+
return adapter->rx_csum;
}
static int
ixgb_set_rx_csum(struct net_device *netdev, uint32_t data)
{
- struct ixgb_adapter *adapter = netdev->priv;
+ struct ixgb_adapter *adapter = netdev_priv(netdev);
+
adapter->rx_csum = data;
if(netif_running(netdev)) {
ixgb_down(adapter,TRUE);
ixgb_up(adapter);
+ /* be optimistic about our link, since we were up before */
+ adapter->link_speed = 10000;
+ adapter->link_duplex = FULL_DUPLEX;
+ netif_carrier_on(netdev);
+ netif_wake_queue(netdev);
} else
ixgb_reset(adapter);
return 0;
@@ -246,14 +264,15 @@ static void
ixgb_get_regs(struct net_device *netdev,
struct ethtool_regs *regs, void *p)
{
- struct ixgb_adapter *adapter = netdev->priv;
+ struct ixgb_adapter *adapter = netdev_priv(netdev);
struct ixgb_hw *hw = &adapter->hw;
uint32_t *reg = p;
uint32_t *reg_start = reg;
uint8_t i;
/* the 1 (one) below indicates an attempt at versioning, if the
- * interface in ethtool or the driver this 1 should be incremented */
+ * interface in ethtool or the driver changes, this 1 should be
+ * incremented */
regs->version = (1<<24) | hw->revision_id << 16 | hw->device_id;
/* General Registers */
@@ -283,7 +302,8 @@ ixgb_get_regs(struct net_device *netdev,
*reg++ = IXGB_READ_REG(hw, RAIDC); /* 19 */
*reg++ = IXGB_READ_REG(hw, RXCSUM); /* 20 */
- for (i = 0; i < IXGB_RAR_ENTRIES; i++) {
+ /* there are 16 RAR entries in hardware, we only use 3 */
+ for(i = 0; i < 16; i++) {
*reg++ = IXGB_READ_REG_ARRAY(hw, RAL, (i << 1)); /*21,...,51 */
*reg++ = IXGB_READ_REG_ARRAY(hw, RAH, (i << 1)); /*22,...,52 */
}
@@ -391,7 +411,7 @@ static int
ixgb_get_eeprom(struct net_device *netdev,
struct ethtool_eeprom *eeprom, uint8_t *bytes)
{
- struct ixgb_adapter *adapter = netdev->priv;
+ struct ixgb_adapter *adapter = netdev_priv(netdev);
struct ixgb_hw *hw = &adapter->hw;
uint16_t *eeprom_buff;
int i, max_len, first_word, last_word;
@@ -439,7 +459,7 @@ static int
ixgb_set_eeprom(struct net_device *netdev,
struct ethtool_eeprom *eeprom, uint8_t *bytes)
{
- struct ixgb_adapter *adapter = netdev->priv;
+ struct ixgb_adapter *adapter = netdev_priv(netdev);
struct ixgb_hw *hw = &adapter->hw;
uint16_t *eeprom_buff;
void *ptr;
@@ -497,7 +517,7 @@ static void
ixgb_get_drvinfo(struct net_device *netdev,
struct ethtool_drvinfo *drvinfo)
{
- struct ixgb_adapter *adapter = netdev->priv;
+ struct ixgb_adapter *adapter = netdev_priv(netdev);
strncpy(drvinfo->driver, ixgb_driver_name, 32);
strncpy(drvinfo->version, ixgb_driver_version, 32);
@@ -512,7 +532,7 @@ static void
ixgb_get_ringparam(struct net_device *netdev,
struct ethtool_ringparam *ring)
{
- struct ixgb_adapter *adapter = netdev->priv;
+ struct ixgb_adapter *adapter = netdev_priv(netdev);
struct ixgb_desc_ring *txdr = &adapter->tx_ring;
struct ixgb_desc_ring *rxdr = &adapter->rx_ring;
@@ -530,7 +550,7 @@ static int
ixgb_set_ringparam(struct net_device *netdev,
struct ethtool_ringparam *ring)
{
- struct ixgb_adapter *adapter = netdev->priv;
+ struct ixgb_adapter *adapter = netdev_priv(netdev);
struct ixgb_desc_ring *txdr = &adapter->tx_ring;
struct ixgb_desc_ring *rxdr = &adapter->rx_ring;
struct ixgb_desc_ring tx_old, tx_new, rx_old, rx_new;
@@ -573,6 +593,11 @@ ixgb_set_ringparam(struct net_device *netdev,
adapter->tx_ring = tx_new;
if((err = ixgb_up(adapter)))
return err;
+ /* be optimistic about our link, since we were up before */
+ adapter->link_speed = 10000;
+ adapter->link_duplex = FULL_DUPLEX;
+ netif_carrier_on(netdev);
+ netif_wake_queue(netdev);
}
return 0;
@@ -607,7 +632,7 @@ ixgb_led_blink_callback(unsigned long data)
static int
ixgb_phys_id(struct net_device *netdev, uint32_t data)
{
- struct ixgb_adapter *adapter = netdev->priv;
+ struct ixgb_adapter *adapter = netdev_priv(netdev);
if(!data || data > (uint32_t)(MAX_SCHEDULE_TIMEOUT / HZ))
data = (uint32_t)(MAX_SCHEDULE_TIMEOUT / HZ);
@@ -643,7 +668,7 @@ static void
ixgb_get_ethtool_stats(struct net_device *netdev,
struct ethtool_stats *stats, uint64_t *data)
{
- struct ixgb_adapter *adapter = netdev->priv;
+ struct ixgb_adapter *adapter = netdev_priv(netdev);
int i;
ixgb_update_stats(adapter);
diff --git a/drivers/net/ixgb/ixgb_hw.h b/drivers/net/ixgb/ixgb_hw.h
index 97898efe7cc..8bcf31ed10c 100644
--- a/drivers/net/ixgb/ixgb_hw.h
+++ b/drivers/net/ixgb/ixgb_hw.h
@@ -822,17 +822,8 @@ extern void ixgb_clear_vfta(struct ixgb_hw *hw);
/* Access functions to eeprom data */
void ixgb_get_ee_mac_addr(struct ixgb_hw *hw, uint8_t *mac_addr);
-uint16_t ixgb_get_ee_compatibility(struct ixgb_hw *hw);
uint32_t ixgb_get_ee_pba_number(struct ixgb_hw *hw);
-uint16_t ixgb_get_ee_init_ctrl_reg_1(struct ixgb_hw *hw);
-uint16_t ixgb_get_ee_init_ctrl_reg_2(struct ixgb_hw *hw);
-uint16_t ixgb_get_ee_subsystem_id(struct ixgb_hw *hw);
-uint16_t ixgb_get_ee_subvendor_id(struct ixgb_hw *hw);
uint16_t ixgb_get_ee_device_id(struct ixgb_hw *hw);
-uint16_t ixgb_get_ee_vendor_id(struct ixgb_hw *hw);
-uint16_t ixgb_get_ee_swdpins_reg(struct ixgb_hw *hw);
-uint8_t ixgb_get_ee_d3_power(struct ixgb_hw *hw);
-uint8_t ixgb_get_ee_d0_power(struct ixgb_hw *hw);
boolean_t ixgb_get_eeprom_data(struct ixgb_hw *hw);
uint16_t ixgb_get_eeprom_word(struct ixgb_hw *hw, uint16_t index);
diff --git a/drivers/net/ixgb/ixgb_main.c b/drivers/net/ixgb/ixgb_main.c
index 097b90ccf57..5c555373adb 100644
--- a/drivers/net/ixgb/ixgb_main.c
+++ b/drivers/net/ixgb/ixgb_main.c
@@ -29,6 +29,11 @@
#include "ixgb.h"
/* Change Log
+ * 1.0.96 04/19/05
+ * - Make needlessly global code static -- bunk@stusta.de
+ * - ethtool cleanup -- shemminger@osdl.org
+ * - Support for MODULE_VERSION -- linville@tuxdriver.com
+ * - add skb_header_cloned check to the tso path -- herbert@apana.org.au
* 1.0.88 01/05/05
* - include fix to the condition that determines when to quit NAPI - Robert Olsson
* - use netif_poll_{disable/enable} to synchronize between NAPI and i/f up/down
@@ -47,10 +52,9 @@ char ixgb_driver_string[] = "Intel(R) PRO/10GbE Network Driver";
#else
#define DRIVERNAPI "-NAPI"
#endif
-
-#define DRV_VERSION "1.0.95-k2"DRIVERNAPI
+#define DRV_VERSION "1.0.100-k2"DRIVERNAPI
char ixgb_driver_version[] = DRV_VERSION;
-char ixgb_copyright[] = "Copyright (c) 1999-2005 Intel Corporation.";
+static char ixgb_copyright[] = "Copyright (c) 1999-2005 Intel Corporation.";
/* ixgb_pci_tbl - PCI Device ID Table
*
@@ -145,10 +149,12 @@ MODULE_LICENSE("GPL");
MODULE_VERSION(DRV_VERSION);
/* some defines for controlling descriptor fetches in h/w */
-#define RXDCTL_PTHRESH_DEFAULT 128 /* chip considers prefech below this */
-#define RXDCTL_HTHRESH_DEFAULT 16 /* chip will only prefetch if tail is
- pushed this many descriptors from head */
#define RXDCTL_WTHRESH_DEFAULT 16 /* chip writes back at this many or RXT0 */
+#define RXDCTL_PTHRESH_DEFAULT 0 /* chip considers prefech below
+ * this */
+#define RXDCTL_HTHRESH_DEFAULT 0 /* chip will only prefetch if tail
+ * is pushed this many descriptors
+ * from head */
/**
* ixgb_init_module - Driver Registration Routine
@@ -376,7 +382,7 @@ ixgb_probe(struct pci_dev *pdev,
SET_NETDEV_DEV(netdev, &pdev->dev);
pci_set_drvdata(pdev, netdev);
- adapter = netdev->priv;
+ adapter = netdev_priv(netdev);
adapter->netdev = netdev;
adapter->pdev = pdev;
adapter->hw.back = adapter;
@@ -512,7 +518,7 @@ static void __devexit
ixgb_remove(struct pci_dev *pdev)
{
struct net_device *netdev = pci_get_drvdata(pdev);
- struct ixgb_adapter *adapter = netdev->priv;
+ struct ixgb_adapter *adapter = netdev_priv(netdev);
unregister_netdev(netdev);
@@ -583,7 +589,7 @@ ixgb_sw_init(struct ixgb_adapter *adapter)
static int
ixgb_open(struct net_device *netdev)
{
- struct ixgb_adapter *adapter = netdev->priv;
+ struct ixgb_adapter *adapter = netdev_priv(netdev);
int err;
/* allocate transmit descriptors */
@@ -626,7 +632,7 @@ err_setup_tx:
static int
ixgb_close(struct net_device *netdev)
{
- struct ixgb_adapter *adapter = netdev->priv;
+ struct ixgb_adapter *adapter = netdev_priv(netdev);
ixgb_down(adapter, TRUE);
@@ -1017,7 +1023,7 @@ ixgb_clean_rx_ring(struct ixgb_adapter *adapter)
static int
ixgb_set_mac(struct net_device *netdev, void *p)
{
- struct ixgb_adapter *adapter = netdev->priv;
+ struct ixgb_adapter *adapter = netdev_priv(netdev);
struct sockaddr *addr = p;
if(!is_valid_ether_addr(addr->sa_data))
@@ -1043,7 +1049,7 @@ ixgb_set_mac(struct net_device *netdev, void *p)
static void
ixgb_set_multi(struct net_device *netdev)
{
- struct ixgb_adapter *adapter = netdev->priv;
+ struct ixgb_adapter *adapter = netdev_priv(netdev);
struct ixgb_hw *hw = &adapter->hw;
struct dev_mc_list *mc_ptr;
uint32_t rctl;
@@ -1371,7 +1377,7 @@ ixgb_tx_queue(struct ixgb_adapter *adapter, int count, int vlan_id,int tx_flags)
static int
ixgb_xmit_frame(struct sk_buff *skb, struct net_device *netdev)
{
- struct ixgb_adapter *adapter = netdev->priv;
+ struct ixgb_adapter *adapter = netdev_priv(netdev);
unsigned int first;
unsigned int tx_flags = 0;
unsigned long flags;
@@ -1425,7 +1431,7 @@ ixgb_xmit_frame(struct sk_buff *skb, struct net_device *netdev)
static void
ixgb_tx_timeout(struct net_device *netdev)
{
- struct ixgb_adapter *adapter = netdev->priv;
+ struct ixgb_adapter *adapter = netdev_priv(netdev);
/* Do the reset outside of interrupt context */
schedule_work(&adapter->tx_timeout_task);
@@ -1434,7 +1440,7 @@ ixgb_tx_timeout(struct net_device *netdev)
static void
ixgb_tx_timeout_task(struct net_device *netdev)
{
- struct ixgb_adapter *adapter = netdev->priv;
+ struct ixgb_adapter *adapter = netdev_priv(netdev);
ixgb_down(adapter, TRUE);
ixgb_up(adapter);
@@ -1451,7 +1457,7 @@ ixgb_tx_timeout_task(struct net_device *netdev)
static struct net_device_stats *
ixgb_get_stats(struct net_device *netdev)
{
- struct ixgb_adapter *adapter = netdev->priv;
+ struct ixgb_adapter *adapter = netdev_priv(netdev);
return &adapter->net_stats;
}
@@ -1467,7 +1473,7 @@ ixgb_get_stats(struct net_device *netdev)
static int
ixgb_change_mtu(struct net_device *netdev, int new_mtu)
{
- struct ixgb_adapter *adapter = netdev->priv;
+ struct ixgb_adapter *adapter = netdev_priv(netdev);
int max_frame = new_mtu + ENET_HEADER_SIZE + ENET_FCS_LENGTH;
int old_max_frame = netdev->mtu + ENET_HEADER_SIZE + ENET_FCS_LENGTH;
@@ -1522,7 +1528,8 @@ ixgb_update_stats(struct ixgb_adapter *adapter)
multi |= ((u64)IXGB_READ_REG(&adapter->hw, MPRCH) << 32);
/* fix up multicast stats by removing broadcasts */
- multi -= bcast;
+ if(multi >= bcast)
+ multi -= bcast;
adapter->stats.mprcl += (multi & 0xFFFFFFFF);
adapter->stats.mprch += (multi >> 32);
@@ -1641,7 +1648,7 @@ static irqreturn_t
ixgb_intr(int irq, void *data, struct pt_regs *regs)
{
struct net_device *netdev = data;
- struct ixgb_adapter *adapter = netdev->priv;
+ struct ixgb_adapter *adapter = netdev_priv(netdev);
struct ixgb_hw *hw = &adapter->hw;
uint32_t icr = IXGB_READ_REG(hw, ICR);
#ifndef CONFIG_IXGB_NAPI
@@ -1688,7 +1695,7 @@ ixgb_intr(int irq, void *data, struct pt_regs *regs)
static int
ixgb_clean(struct net_device *netdev, int *budget)
{
- struct ixgb_adapter *adapter = netdev->priv;
+ struct ixgb_adapter *adapter = netdev_priv(netdev);
int work_to_do = min(*budget, netdev->quota);
int tx_cleaned;
int work_done = 0;
@@ -2017,7 +2024,7 @@ ixgb_alloc_rx_buffers(struct ixgb_adapter *adapter)
static void
ixgb_vlan_rx_register(struct net_device *netdev, struct vlan_group *grp)
{
- struct ixgb_adapter *adapter = netdev->priv;
+ struct ixgb_adapter *adapter = netdev_priv(netdev);
uint32_t ctrl, rctl;
ixgb_irq_disable(adapter);
@@ -2055,7 +2062,7 @@ ixgb_vlan_rx_register(struct net_device *netdev, struct vlan_group *grp)
static void
ixgb_vlan_rx_add_vid(struct net_device *netdev, uint16_t vid)
{
- struct ixgb_adapter *adapter = netdev->priv;
+ struct ixgb_adapter *adapter = netdev_priv(netdev);
uint32_t vfta, index;
/* add VID to filter table */
@@ -2069,7 +2076,7 @@ ixgb_vlan_rx_add_vid(struct net_device *netdev, uint16_t vid)
static void
ixgb_vlan_rx_kill_vid(struct net_device *netdev, uint16_t vid)
{
- struct ixgb_adapter *adapter = netdev->priv;
+ struct ixgb_adapter *adapter = netdev_priv(netdev);
uint32_t vfta, index;
ixgb_irq_disable(adapter);
diff --git a/drivers/net/jazzsonic.c b/drivers/net/jazzsonic.c
index 7fec613e167..8423cb6875f 100644
--- a/drivers/net/jazzsonic.c
+++ b/drivers/net/jazzsonic.c
@@ -1,5 +1,10 @@
/*
- * sonic.c
+ * jazzsonic.c
+ *
+ * (C) 2005 Finn Thain
+ *
+ * Converted to DMA API, and (from the mac68k project) introduced
+ * dhd's support for 16-bit cards.
*
* (C) 1996,1998 by Thomas Bogendoerfer (tsbogend@alpha.franken.de)
*
@@ -28,8 +33,8 @@
#include <linux/netdevice.h>
#include <linux/etherdevice.h>
#include <linux/skbuff.h>
-#include <linux/bitops.h>
#include <linux/device.h>
+#include <linux/dma-mapping.h>
#include <asm/bootinfo.h>
#include <asm/system.h>
@@ -44,22 +49,20 @@ static struct platform_device *jazz_sonic_device;
#define SONIC_MEM_SIZE 0x100
-#define SREGS_PAD(n) u16 n;
-
#include "sonic.h"
/*
* Macros to access SONIC registers
*/
-#define SONIC_READ(reg) (*((volatile unsigned int *)base_addr+reg))
+#define SONIC_READ(reg) (*((volatile unsigned int *)dev->base_addr+reg))
#define SONIC_WRITE(reg,val) \
do { \
- *((volatile unsigned int *)base_addr+(reg)) = (val); \
+ *((volatile unsigned int *)dev->base_addr+(reg)) = (val); \
} while (0)
-/* use 0 for production, 1 for verification, >2 for debug */
+/* use 0 for production, 1 for verification, >1 for debug */
#ifdef SONIC_DEBUG
static unsigned int sonic_debug = SONIC_DEBUG;
#else
@@ -85,18 +88,18 @@ static unsigned short known_revisions[] =
0xffff /* end of list */
};
-static int __init sonic_probe1(struct net_device *dev, unsigned long base_addr,
- unsigned int irq)
+static int __init sonic_probe1(struct net_device *dev)
{
static unsigned version_printed;
unsigned int silicon_revision;
unsigned int val;
- struct sonic_local *lp;
+ struct sonic_local *lp = netdev_priv(dev);
int err = -ENODEV;
int i;
- if (!request_mem_region(base_addr, SONIC_MEM_SIZE, jazz_sonic_string))
+ if (!request_mem_region(dev->base_addr, SONIC_MEM_SIZE, jazz_sonic_string))
return -EBUSY;
+
/*
* get the Silicon Revision ID. If this is one of the known
* one assume that we found a SONIC ethernet controller at
@@ -120,11 +123,7 @@ static int __init sonic_probe1(struct net_device *dev, unsigned long base_addr,
if (sonic_debug && version_printed++ == 0)
printk(version);
- printk("%s: Sonic ethernet found at 0x%08lx, ", dev->name, base_addr);
-
- /* Fill in the 'dev' fields. */
- dev->base_addr = base_addr;
- dev->irq = irq;
+ printk(KERN_INFO "%s: Sonic ethernet found at 0x%08lx, ", lp->device->bus_id, dev->base_addr);
/*
* Put the sonic into software reset, then
@@ -138,84 +137,44 @@ static int __init sonic_probe1(struct net_device *dev, unsigned long base_addr,
dev->dev_addr[i*2+1] = val >> 8;
}
- printk("HW Address ");
- for (i = 0; i < 6; i++) {
- printk("%2.2x", dev->dev_addr[i]);
- if (i<5)
- printk(":");
- }
-
- printk(" IRQ %d\n", irq);
-
err = -ENOMEM;
/* Initialize the device structure. */
- if (dev->priv == NULL) {
- /*
- * the memory be located in the same 64kb segment
- */
- lp = NULL;
- i = 0;
- do {
- lp = kmalloc(sizeof(*lp), GFP_KERNEL);
- if ((unsigned long) lp >> 16
- != ((unsigned long)lp + sizeof(*lp) ) >> 16) {
- /* FIXME, free the memory later */
- kfree(lp);
- lp = NULL;
- }
- } while (lp == NULL && i++ < 20);
-
- if (lp == NULL) {
- printk("%s: couldn't allocate memory for descriptors\n",
- dev->name);
- goto out;
- }
- memset(lp, 0, sizeof(struct sonic_local));
-
- /* get the virtual dma address */
- lp->cda_laddr = vdma_alloc(CPHYSADDR(lp),sizeof(*lp));
- if (lp->cda_laddr == ~0UL) {
- printk("%s: couldn't get DMA page entry for "
- "descriptors\n", dev->name);
- goto out1;
- }
-
- lp->tda_laddr = lp->cda_laddr + sizeof (lp->cda);
- lp->rra_laddr = lp->tda_laddr + sizeof (lp->tda);
- lp->rda_laddr = lp->rra_laddr + sizeof (lp->rra);
-
- /* allocate receive buffer area */
- /* FIXME, maybe we should use skbs */
- lp->rba = kmalloc(SONIC_NUM_RRS * SONIC_RBSIZE, GFP_KERNEL);
- if (!lp->rba) {
- printk("%s: couldn't allocate receive buffers\n",
- dev->name);
- goto out2;
- }
+ lp->dma_bitmode = SONIC_BITMODE32;
- /* get virtual dma address */
- lp->rba_laddr = vdma_alloc(CPHYSADDR(lp->rba),
- SONIC_NUM_RRS * SONIC_RBSIZE);
- if (lp->rba_laddr == ~0UL) {
- printk("%s: couldn't get DMA page entry for receive "
- "buffers\n",dev->name);
- goto out3;
- }
-
- /* now convert pointer to KSEG1 pointer */
- lp->rba = (char *)KSEG1ADDR(lp->rba);
- flush_cache_all();
- dev->priv = (struct sonic_local *)KSEG1ADDR(lp);
+ /* Allocate the entire chunk of memory for the descriptors.
+ Note that this cannot cross a 64K boundary. */
+ if ((lp->descriptors = dma_alloc_coherent(lp->device,
+ SIZEOF_SONIC_DESC * SONIC_BUS_SCALE(lp->dma_bitmode),
+ &lp->descriptors_laddr, GFP_KERNEL)) == NULL) {
+ printk(KERN_ERR "%s: couldn't alloc DMA memory for descriptors.\n", lp->device->bus_id);
+ goto out;
}
- lp = (struct sonic_local *)dev->priv;
+ /* Now set up the pointers to point to the appropriate places */
+ lp->cda = lp->descriptors;
+ lp->tda = lp->cda + (SIZEOF_SONIC_CDA
+ * SONIC_BUS_SCALE(lp->dma_bitmode));
+ lp->rda = lp->tda + (SIZEOF_SONIC_TD * SONIC_NUM_TDS
+ * SONIC_BUS_SCALE(lp->dma_bitmode));
+ lp->rra = lp->rda + (SIZEOF_SONIC_RD * SONIC_NUM_RDS
+ * SONIC_BUS_SCALE(lp->dma_bitmode));
+
+ lp->cda_laddr = lp->descriptors_laddr;
+ lp->tda_laddr = lp->cda_laddr + (SIZEOF_SONIC_CDA
+ * SONIC_BUS_SCALE(lp->dma_bitmode));
+ lp->rda_laddr = lp->tda_laddr + (SIZEOF_SONIC_TD * SONIC_NUM_TDS
+ * SONIC_BUS_SCALE(lp->dma_bitmode));
+ lp->rra_laddr = lp->rda_laddr + (SIZEOF_SONIC_RD * SONIC_NUM_RDS
+ * SONIC_BUS_SCALE(lp->dma_bitmode));
+
dev->open = sonic_open;
dev->stop = sonic_close;
dev->hard_start_xmit = sonic_send_packet;
- dev->get_stats = sonic_get_stats;
+ dev->get_stats = sonic_get_stats;
dev->set_multicast_list = &sonic_multicast_list;
+ dev->tx_timeout = sonic_tx_timeout;
dev->watchdog_timeo = TX_TIMEOUT;
/*
@@ -226,14 +185,8 @@ static int __init sonic_probe1(struct net_device *dev, unsigned long base_addr,
SONIC_WRITE(SONIC_MPT,0xffff);
return 0;
-out3:
- kfree(lp->rba);
-out2:
- vdma_free(lp->cda_laddr);
-out1:
- kfree(lp);
out:
- release_region(base_addr, SONIC_MEM_SIZE);
+ release_region(dev->base_addr, SONIC_MEM_SIZE);
return err;
}
@@ -245,7 +198,6 @@ static int __init jazz_sonic_probe(struct device *device)
{
struct net_device *dev;
struct sonic_local *lp;
- unsigned long base_addr;
int err = 0;
int i;
@@ -255,21 +207,26 @@ static int __init jazz_sonic_probe(struct device *device)
if (mips_machgroup != MACH_GROUP_JAZZ)
return -ENODEV;
- dev = alloc_etherdev(0);
+ dev = alloc_etherdev(sizeof(struct sonic_local));
if (!dev)
return -ENOMEM;
+ lp = netdev_priv(dev);
+ lp->device = device;
+ SET_NETDEV_DEV(dev, device);
+ SET_MODULE_OWNER(dev);
+
netdev_boot_setup_check(dev);
- base_addr = dev->base_addr;
- if (base_addr >= KSEG0) { /* Check a single specified location. */
- err = sonic_probe1(dev, base_addr, dev->irq);
- } else if (base_addr != 0) { /* Don't probe at all. */
+ if (dev->base_addr >= KSEG0) { /* Check a single specified location. */
+ err = sonic_probe1(dev);
+ } else if (dev->base_addr != 0) { /* Don't probe at all. */
err = -ENXIO;
} else {
for (i = 0; sonic_portlist[i].port; i++) {
- int io = sonic_portlist[i].port;
- if (sonic_probe1(dev, io, sonic_portlist[i].irq) == 0)
+ dev->base_addr = sonic_portlist[i].port;
+ dev->irq = sonic_portlist[i].irq;
+ if (sonic_probe1(dev) == 0)
break;
}
if (!sonic_portlist[i].port)
@@ -281,14 +238,17 @@ static int __init jazz_sonic_probe(struct device *device)
if (err)
goto out1;
+ printk("%s: MAC ", dev->name);
+ for (i = 0; i < 6; i++) {
+ printk("%2.2x", dev->dev_addr[i]);
+ if (i < 5)
+ printk(":");
+ }
+ printk(" IRQ %d\n", dev->irq);
+
return 0;
out1:
- lp = dev->priv;
- vdma_free(lp->rba_laddr);
- kfree(lp->rba);
- vdma_free(lp->cda_laddr);
- kfree(lp);
release_region(dev->base_addr, SONIC_MEM_SIZE);
out:
free_netdev(dev);
@@ -296,21 +256,22 @@ out:
return err;
}
-/*
- * SONIC uses a normal IRQ
- */
-#define sonic_request_irq request_irq
-#define sonic_free_irq free_irq
+MODULE_DESCRIPTION("Jazz SONIC ethernet driver");
+module_param(sonic_debug, int, 0);
+MODULE_PARM_DESC(sonic_debug, "jazzsonic debug level (1-4)");
-#define sonic_chiptomem(x) KSEG1ADDR(vdma_log2phys(x))
+#define SONIC_IRQ_FLAG SA_INTERRUPT
#include "sonic.c"
static int __devexit jazz_sonic_device_remove (struct device *device)
{
struct net_device *dev = device->driver_data;
+ struct sonic_local* lp = netdev_priv(dev);
unregister_netdev (dev);
+ dma_free_coherent(lp->device, SIZEOF_SONIC_DESC * SONIC_BUS_SCALE(lp->dma_bitmode),
+ lp->descriptors, lp->descriptors_laddr);
release_region (dev->base_addr, SONIC_MEM_SIZE);
free_netdev (dev);
@@ -323,7 +284,7 @@ static struct device_driver jazz_sonic_driver = {
.probe = jazz_sonic_probe,
.remove = __devexit_p(jazz_sonic_device_remove),
};
-
+
static void jazz_sonic_platform_release (struct device *device)
{
struct platform_device *pldev;
@@ -336,10 +297,11 @@ static void jazz_sonic_platform_release (struct device *device)
static int __init jazz_sonic_init_module(void)
{
struct platform_device *pldev;
+ int err;
- if (driver_register(&jazz_sonic_driver)) {
+ if ((err = driver_register(&jazz_sonic_driver))) {
printk(KERN_ERR "Driver registration failed\n");
- return -ENOMEM;
+ return err;
}
jazz_sonic_device = NULL;
diff --git a/drivers/net/loopback.c b/drivers/net/loopback.c
index 1f61f0cc95d..690a1aae0b3 100644
--- a/drivers/net/loopback.c
+++ b/drivers/net/loopback.c
@@ -68,6 +68,7 @@ static DEFINE_PER_CPU(struct net_device_stats, loopback_stats);
* of largesending device modulo TCP checksum, which is ignored for loopback.
*/
+#ifdef LOOPBACK_TSO
static void emulate_large_send_offload(struct sk_buff *skb)
{
struct iphdr *iph = skb->nh.iph;
@@ -119,6 +120,7 @@ static void emulate_large_send_offload(struct sk_buff *skb)
dev_kfree_skb(skb);
}
+#endif /* LOOPBACK_TSO */
/*
* The higher levels take care of making this non-reentrant (it's
@@ -130,12 +132,13 @@ static int loopback_xmit(struct sk_buff *skb, struct net_device *dev)
skb_orphan(skb);
- skb->protocol=eth_type_trans(skb,dev);
- skb->dev=dev;
+ skb->protocol = eth_type_trans(skb,dev);
+ skb->dev = dev;
#ifndef LOOPBACK_MUST_CHECKSUM
skb->ip_summed = CHECKSUM_UNNECESSARY;
#endif
+#ifdef LOOPBACK_TSO
if (skb_shinfo(skb)->tso_size) {
BUG_ON(skb->protocol != htons(ETH_P_IP));
BUG_ON(skb->nh.iph->protocol != IPPROTO_TCP);
@@ -143,14 +146,14 @@ static int loopback_xmit(struct sk_buff *skb, struct net_device *dev)
emulate_large_send_offload(skb);
return 0;
}
-
+#endif
dev->last_rx = jiffies;
lb_stats = &per_cpu(loopback_stats, get_cpu());
lb_stats->rx_bytes += skb->len;
- lb_stats->tx_bytes += skb->len;
+ lb_stats->tx_bytes = lb_stats->rx_bytes;
lb_stats->rx_packets++;
- lb_stats->tx_packets++;
+ lb_stats->tx_packets = lb_stats->rx_packets;
put_cpu();
netif_rx(skb);
@@ -208,9 +211,12 @@ struct net_device loopback_dev = {
.type = ARPHRD_LOOPBACK, /* 0x0001*/
.rebuild_header = eth_rebuild_header,
.flags = IFF_LOOPBACK,
- .features = NETIF_F_SG|NETIF_F_FRAGLIST
- |NETIF_F_NO_CSUM|NETIF_F_HIGHDMA
- |NETIF_F_LLTX,
+ .features = NETIF_F_SG | NETIF_F_FRAGLIST
+#ifdef LOOPBACK_TSO
+ | NETIF_F_TSO
+#endif
+ | NETIF_F_NO_CSUM | NETIF_F_HIGHDMA
+ | NETIF_F_LLTX,
.ethtool_ops = &loopback_ethtool_ops,
};
diff --git a/drivers/net/macsonic.c b/drivers/net/macsonic.c
index be28c65de72..405e18365ed 100644
--- a/drivers/net/macsonic.c
+++ b/drivers/net/macsonic.c
@@ -1,6 +1,12 @@
/*
* macsonic.c
*
+ * (C) 2005 Finn Thain
+ *
+ * Converted to DMA API, converted to unified driver model, made it work as
+ * a module again, and from the mac68k project, introduced more 32-bit cards
+ * and dhd's support for 16-bit cards.
+ *
* (C) 1998 Alan Cox
*
* Debugging Andreas Ehliar, Michael Schmitz
@@ -26,8 +32,8 @@
*/
#include <linux/kernel.h>
+#include <linux/module.h>
#include <linux/types.h>
-#include <linux/ctype.h>
#include <linux/fcntl.h>
#include <linux/interrupt.h>
#include <linux/init.h>
@@ -41,8 +47,8 @@
#include <linux/netdevice.h>
#include <linux/etherdevice.h>
#include <linux/skbuff.h>
-#include <linux/module.h>
-#include <linux/bitops.h>
+#include <linux/device.h>
+#include <linux/dma-mapping.h>
#include <asm/bootinfo.h>
#include <asm/system.h>
@@ -54,25 +60,28 @@
#include <asm/macints.h>
#include <asm/mac_via.h>
-#define SREGS_PAD(n) u16 n;
+static char mac_sonic_string[] = "macsonic";
+static struct platform_device *mac_sonic_device;
#include "sonic.h"
-#define SONIC_READ(reg) \
- nubus_readl(base_addr+(reg))
-#define SONIC_WRITE(reg,val) \
- nubus_writel((val), base_addr+(reg))
-#define sonic_read(dev, reg) \
- nubus_readl((dev)->base_addr+(reg))
-#define sonic_write(dev, reg, val) \
- nubus_writel((val), (dev)->base_addr+(reg))
-
+/* These should basically be bus-size and endian independent (since
+ the SONIC is at least smart enough that it uses the same endianness
+ as the host, unlike certain less enlightened Macintosh NICs) */
+#define SONIC_READ(reg) (nubus_readw(dev->base_addr + (reg * 4) \
+ + lp->reg_offset))
+#define SONIC_WRITE(reg,val) (nubus_writew(val, dev->base_addr + (reg * 4) \
+ + lp->reg_offset))
+
+/* use 0 for production, 1 for verification, >1 for debug */
+#ifdef SONIC_DEBUG
+static unsigned int sonic_debug = SONIC_DEBUG;
+#else
+static unsigned int sonic_debug = 1;
+#endif
-static int sonic_debug;
static int sonic_version_printed;
-static int reg_offset;
-
extern int mac_onboard_sonic_probe(struct net_device* dev);
extern int mac_nubus_sonic_probe(struct net_device* dev);
@@ -108,40 +117,6 @@ enum macsonic_type {
#define SONIC_READ_PROM(addr) nubus_readb(prom_addr+addr)
-struct net_device * __init macsonic_probe(int unit)
-{
- struct net_device *dev = alloc_etherdev(0);
- int err;
-
- if (!dev)
- return ERR_PTR(-ENOMEM);
-
- if (unit >= 0)
- sprintf(dev->name, "eth%d", unit);
-
- SET_MODULE_OWNER(dev);
-
- /* This will catch fatal stuff like -ENOMEM as well as success */
- err = mac_onboard_sonic_probe(dev);
- if (err == 0)
- goto found;
- if (err != -ENODEV)
- goto out;
- err = mac_nubus_sonic_probe(dev);
- if (err)
- goto out;
-found:
- err = register_netdev(dev);
- if (err)
- goto out1;
- return dev;
-out1:
- kfree(dev->priv);
-out:
- free_netdev(dev);
- return ERR_PTR(err);
-}
-
/*
* For reversing the PROM address
*/
@@ -160,103 +135,55 @@ static inline void bit_reverse_addr(unsigned char addr[6])
int __init macsonic_init(struct net_device* dev)
{
- struct sonic_local* lp = NULL;
- int i;
+ struct sonic_local* lp = netdev_priv(dev);
/* Allocate the entire chunk of memory for the descriptors.
Note that this cannot cross a 64K boundary. */
- for (i = 0; i < 20; i++) {
- unsigned long desc_base, desc_top;
- if((lp = kmalloc(sizeof(struct sonic_local), GFP_KERNEL | GFP_DMA)) == NULL) {
- printk(KERN_ERR "%s: couldn't allocate descriptor buffers\n", dev->name);
- return -ENOMEM;
- }
-
- desc_base = (unsigned long) lp;
- desc_top = desc_base + sizeof(struct sonic_local);
- if ((desc_top & 0xffff) >= (desc_base & 0xffff))
- break;
- /* Hmm. try again (FIXME: does this actually work?) */
- kfree(lp);
- printk(KERN_DEBUG
- "%s: didn't get continguous chunk [%08lx - %08lx], trying again\n",
- dev->name, desc_base, desc_top);
- }
-
- if (lp == NULL) {
- printk(KERN_ERR "%s: tried 20 times to allocate descriptor buffers, giving up.\n",
- dev->name);
+ if ((lp->descriptors = dma_alloc_coherent(lp->device,
+ SIZEOF_SONIC_DESC * SONIC_BUS_SCALE(lp->dma_bitmode),
+ &lp->descriptors_laddr, GFP_KERNEL)) == NULL) {
+ printk(KERN_ERR "%s: couldn't alloc DMA memory for descriptors.\n", lp->device->bus_id);
return -ENOMEM;
- }
-
- dev->priv = lp;
-
-#if 0
- /* this code is only here as a curiousity... mainly, where the
- fuck did SONIC_BUS_SCALE come from, and what was it supposed
- to do? the normal allocation works great for 32 bit stuffs.. */
+ }
/* Now set up the pointers to point to the appropriate places */
- lp->cda = lp->sonic_desc;
- lp->tda = lp->cda + (SIZEOF_SONIC_CDA * SONIC_BUS_SCALE(lp->dma_bitmode));
+ lp->cda = lp->descriptors;
+ lp->tda = lp->cda + (SIZEOF_SONIC_CDA
+ * SONIC_BUS_SCALE(lp->dma_bitmode));
lp->rda = lp->tda + (SIZEOF_SONIC_TD * SONIC_NUM_TDS
- * SONIC_BUS_SCALE(lp->dma_bitmode));
+ * SONIC_BUS_SCALE(lp->dma_bitmode));
lp->rra = lp->rda + (SIZEOF_SONIC_RD * SONIC_NUM_RDS
- * SONIC_BUS_SCALE(lp->dma_bitmode));
+ * SONIC_BUS_SCALE(lp->dma_bitmode));
-#endif
-
- memset(lp, 0, sizeof(struct sonic_local));
-
- lp->cda_laddr = (unsigned int)&(lp->cda);
- lp->tda_laddr = (unsigned int)lp->tda;
- lp->rra_laddr = (unsigned int)lp->rra;
- lp->rda_laddr = (unsigned int)lp->rda;
-
- /* FIXME, maybe we should use skbs */
- if ((lp->rba = (char *)
- kmalloc(SONIC_NUM_RRS * SONIC_RBSIZE, GFP_KERNEL | GFP_DMA)) == NULL) {
- printk(KERN_ERR "%s: couldn't allocate receive buffers\n", dev->name);
- dev->priv = NULL;
- kfree(lp);
- return -ENOMEM;
- }
-
- lp->rba_laddr = (unsigned int)lp->rba;
-
- {
- int rs, ds;
-
- /* almost always 12*4096, but let's not take chances */
- rs = ((SONIC_NUM_RRS * SONIC_RBSIZE + 4095) / 4096) * 4096;
- /* almost always under a page, but let's not take chances */
- ds = ((sizeof(struct sonic_local) + 4095) / 4096) * 4096;
- kernel_set_cachemode(lp->rba, rs, IOMAP_NOCACHE_SER);
- kernel_set_cachemode(lp, ds, IOMAP_NOCACHE_SER);
- }
-
-#if 0
- flush_cache_all();
-#endif
+ lp->cda_laddr = lp->descriptors_laddr;
+ lp->tda_laddr = lp->cda_laddr + (SIZEOF_SONIC_CDA
+ * SONIC_BUS_SCALE(lp->dma_bitmode));
+ lp->rda_laddr = lp->tda_laddr + (SIZEOF_SONIC_TD * SONIC_NUM_TDS
+ * SONIC_BUS_SCALE(lp->dma_bitmode));
+ lp->rra_laddr = lp->rda_laddr + (SIZEOF_SONIC_RD * SONIC_NUM_RDS
+ * SONIC_BUS_SCALE(lp->dma_bitmode));
dev->open = sonic_open;
dev->stop = sonic_close;
dev->hard_start_xmit = sonic_send_packet;
dev->get_stats = sonic_get_stats;
dev->set_multicast_list = &sonic_multicast_list;
+ dev->tx_timeout = sonic_tx_timeout;
+ dev->watchdog_timeo = TX_TIMEOUT;
/*
* clear tally counter
*/
- sonic_write(dev, SONIC_CRCT, 0xffff);
- sonic_write(dev, SONIC_FAET, 0xffff);
- sonic_write(dev, SONIC_MPT, 0xffff);
+ SONIC_WRITE(SONIC_CRCT, 0xffff);
+ SONIC_WRITE(SONIC_FAET, 0xffff);
+ SONIC_WRITE(SONIC_MPT, 0xffff);
return 0;
}
int __init mac_onboard_sonic_ethernet_addr(struct net_device* dev)
{
+ struct sonic_local *lp = netdev_priv(dev);
const int prom_addr = ONBOARD_SONIC_PROM_BASE;
int i;
@@ -270,6 +197,7 @@ int __init mac_onboard_sonic_ethernet_addr(struct net_device* dev)
why this is so. */
if (memcmp(dev->dev_addr, "\x08\x00\x07", 3) &&
memcmp(dev->dev_addr, "\x00\xA0\x40", 3) &&
+ memcmp(dev->dev_addr, "\x00\x80\x19", 3) &&
memcmp(dev->dev_addr, "\x00\x05\x02", 3))
bit_reverse_addr(dev->dev_addr);
else
@@ -281,22 +209,23 @@ int __init mac_onboard_sonic_ethernet_addr(struct net_device* dev)
the card... */
if (memcmp(dev->dev_addr, "\x08\x00\x07", 3) &&
memcmp(dev->dev_addr, "\x00\xA0\x40", 3) &&
+ memcmp(dev->dev_addr, "\x00\x80\x19", 3) &&
memcmp(dev->dev_addr, "\x00\x05\x02", 3))
{
unsigned short val;
printk(KERN_INFO "macsonic: PROM seems to be wrong, trying CAM entry 15\n");
- sonic_write(dev, SONIC_CMD, SONIC_CR_RST);
- sonic_write(dev, SONIC_CEP, 15);
+ SONIC_WRITE(SONIC_CMD, SONIC_CR_RST);
+ SONIC_WRITE(SONIC_CEP, 15);
- val = sonic_read(dev, SONIC_CAP2);
+ val = SONIC_READ(SONIC_CAP2);
dev->dev_addr[5] = val >> 8;
dev->dev_addr[4] = val & 0xff;
- val = sonic_read(dev, SONIC_CAP1);
+ val = SONIC_READ(SONIC_CAP1);
dev->dev_addr[3] = val >> 8;
dev->dev_addr[2] = val & 0xff;
- val = sonic_read(dev, SONIC_CAP0);
+ val = SONIC_READ(SONIC_CAP0);
dev->dev_addr[1] = val >> 8;
dev->dev_addr[0] = val & 0xff;
@@ -311,6 +240,7 @@ int __init mac_onboard_sonic_ethernet_addr(struct net_device* dev)
if (memcmp(dev->dev_addr, "\x08\x00\x07", 3) &&
memcmp(dev->dev_addr, "\x00\xA0\x40", 3) &&
+ memcmp(dev->dev_addr, "\x00\x80\x19", 3) &&
memcmp(dev->dev_addr, "\x00\x05\x02", 3))
{
/*
@@ -325,8 +255,9 @@ int __init mac_onboard_sonic_probe(struct net_device* dev)
{
/* Bwahahaha */
static int once_is_more_than_enough;
- int i;
- int dma_bitmode;
+ struct sonic_local* lp = netdev_priv(dev);
+ int sr;
+ int commslot = 0;
if (once_is_more_than_enough)
return -ENODEV;
@@ -335,20 +266,18 @@ int __init mac_onboard_sonic_probe(struct net_device* dev)
if (!MACH_IS_MAC)
return -ENODEV;
- printk(KERN_INFO "Checking for internal Macintosh ethernet (SONIC).. ");
-
if (macintosh_config->ether_type != MAC_ETHER_SONIC)
- {
- printk("none.\n");
return -ENODEV;
- }
-
+
+ printk(KERN_INFO "Checking for internal Macintosh ethernet (SONIC).. ");
+
/* Bogus probing, on the models which may or may not have
Ethernet (BTW, the Ethernet *is* always at the same
address, and nothing else lives there, at least if Apple's
documentation is to be believed) */
if (macintosh_config->ident == MAC_MODEL_Q630 ||
macintosh_config->ident == MAC_MODEL_P588 ||
+ macintosh_config->ident == MAC_MODEL_P575 ||
macintosh_config->ident == MAC_MODEL_C610) {
unsigned long flags;
int card_present;
@@ -361,13 +290,13 @@ int __init mac_onboard_sonic_probe(struct net_device* dev)
printk("none.\n");
return -ENODEV;
}
+ commslot = 1;
}
printk("yes\n");
- /* Danger! My arms are flailing wildly! You *must* set this
- before using sonic_read() */
-
+ /* Danger! My arms are flailing wildly! You *must* set lp->reg_offset
+ * and dev->base_addr before using SONIC_READ() or SONIC_WRITE() */
dev->base_addr = ONBOARD_SONIC_REGISTERS;
if (via_alt_mapping)
dev->irq = IRQ_AUTO_3;
@@ -379,84 +308,66 @@ int __init mac_onboard_sonic_probe(struct net_device* dev)
sonic_version_printed = 1;
}
printk(KERN_INFO "%s: onboard / comm-slot SONIC at 0x%08lx\n",
- dev->name, dev->base_addr);
-
- /* Now do a song and dance routine in an attempt to determine
- the bus width */
+ lp->device->bus_id, dev->base_addr);
/* The PowerBook's SONIC is 16 bit always. */
if (macintosh_config->ident == MAC_MODEL_PB520) {
- reg_offset = 0;
- dma_bitmode = 0;
- } else if (macintosh_config->ident == MAC_MODEL_C610) {
- reg_offset = 0;
- dma_bitmode = 1;
- } else {
+ lp->reg_offset = 0;
+ lp->dma_bitmode = SONIC_BITMODE16;
+ sr = SONIC_READ(SONIC_SR);
+ } else if (commslot) {
/* Some of the comm-slot cards are 16 bit. But some
- of them are not. The 32-bit cards use offset 2 and
- pad with zeroes or sometimes ones (I think...)
- Therefore, if we try offset 0 and get a silicon
- revision of 0, we assume 16 bit. */
- int sr;
-
- /* Technically this is not necessary since we zeroed
- it above */
- reg_offset = 0;
- dma_bitmode = 0;
- sr = sonic_read(dev, SONIC_SR);
- if (sr == 0 || sr == 0xffff) {
- reg_offset = 2;
- /* 83932 is 0x0004, 83934 is 0x0100 or 0x0101 */
- sr = sonic_read(dev, SONIC_SR);
- dma_bitmode = 1;
-
+ of them are not. The 32-bit cards use offset 2 and
+ have known revisions, we try reading the revision
+ register at offset 2, if we don't get a known revision
+ we assume 16 bit at offset 0. */
+ lp->reg_offset = 2;
+ lp->dma_bitmode = SONIC_BITMODE16;
+
+ sr = SONIC_READ(SONIC_SR);
+ if (sr == 0x0004 || sr == 0x0006 || sr == 0x0100 || sr == 0x0101)
+ /* 83932 is 0x0004 or 0x0006, 83934 is 0x0100 or 0x0101 */
+ lp->dma_bitmode = SONIC_BITMODE32;
+ else {
+ lp->dma_bitmode = SONIC_BITMODE16;
+ lp->reg_offset = 0;
+ sr = SONIC_READ(SONIC_SR);
}
- printk(KERN_INFO
- "%s: revision 0x%04x, using %d bit DMA and register offset %d\n",
- dev->name, sr, dma_bitmode?32:16, reg_offset);
+ } else {
+ /* All onboard cards are at offset 2 with 32 bit DMA. */
+ lp->reg_offset = 2;
+ lp->dma_bitmode = SONIC_BITMODE32;
+ sr = SONIC_READ(SONIC_SR);
}
-
+ printk(KERN_INFO
+ "%s: revision 0x%04x, using %d bit DMA and register offset %d\n",
+ lp->device->bus_id, sr, lp->dma_bitmode?32:16, lp->reg_offset);
- /* this carries my sincere apologies -- by the time I got to updating
- the driver, support for "reg_offsets" appeares nowhere in the sonic
- code, going back for over a year. Fortunately, my Mac does't seem
- to use whatever this was.
+#if 0 /* This is sometimes useful to find out how MacOS configured the card. */
+ printk(KERN_INFO "%s: DCR: 0x%04x, DCR2: 0x%04x\n", lp->device->bus_id,
+ SONIC_READ(SONIC_DCR) & 0xffff, SONIC_READ(SONIC_DCR2) & 0xffff);
+#endif
- If you know how this is supposed to be implemented, either fix it,
- or contact me (sammy@oh.verio.com) to explain what it is. --Sam */
-
- if(reg_offset) {
- printk("%s: register offset unsupported. please fix this if you know what it is.\n", dev->name);
- return -ENODEV;
- }
-
/* Software reset, then initialize control registers. */
- sonic_write(dev, SONIC_CMD, SONIC_CR_RST);
- sonic_write(dev, SONIC_DCR, SONIC_DCR_BMS |
- SONIC_DCR_RFT1 | SONIC_DCR_TFT0 | SONIC_DCR_EXBUS |
- (dma_bitmode ? SONIC_DCR_DW : 0));
+ SONIC_WRITE(SONIC_CMD, SONIC_CR_RST);
+
+ SONIC_WRITE(SONIC_DCR, SONIC_DCR_EXBUS | SONIC_DCR_BMS |
+ SONIC_DCR_RFT1 | SONIC_DCR_TFT0 |
+ (lp->dma_bitmode ? SONIC_DCR_DW : 0));
/* This *must* be written back to in order to restore the
- extended programmable output bits */
- sonic_write(dev, SONIC_DCR2, 0);
+ * extended programmable output bits, as it may not have been
+ * initialised since the hardware reset. */
+ SONIC_WRITE(SONIC_DCR2, 0);
/* Clear *and* disable interrupts to be on the safe side */
- sonic_write(dev, SONIC_ISR,0x7fff);
- sonic_write(dev, SONIC_IMR,0);
+ SONIC_WRITE(SONIC_IMR, 0);
+ SONIC_WRITE(SONIC_ISR, 0x7fff);
/* Now look for the MAC address. */
if (mac_onboard_sonic_ethernet_addr(dev) != 0)
return -ENODEV;
- printk(KERN_INFO "MAC ");
- for (i = 0; i < 6; i++) {
- printk("%2.2x", dev->dev_addr[i]);
- if (i < 5)
- printk(":");
- }
-
- printk(" IRQ %d\n", dev->irq);
-
/* Shared init code */
return macsonic_init(dev);
}
@@ -468,8 +379,10 @@ int __init mac_nubus_sonic_ethernet_addr(struct net_device* dev,
int i;
for(i = 0; i < 6; i++)
dev->dev_addr[i] = SONIC_READ_PROM(i);
- /* For now we are going to assume that they're all bit-reversed */
- bit_reverse_addr(dev->dev_addr);
+
+ /* Some of the addresses are bit-reversed */
+ if (id != MACSONIC_DAYNA)
+ bit_reverse_addr(dev->dev_addr);
return 0;
}
@@ -487,6 +400,15 @@ int __init macsonic_ident(struct nubus_dev* ndev)
else
return MACSONIC_APPLE;
}
+
+ if (ndev->dr_hw == NUBUS_DRHW_SMC9194 &&
+ ndev->dr_sw == NUBUS_DRSW_DAYNA)
+ return MACSONIC_DAYNA;
+
+ if (ndev->dr_hw == NUBUS_DRHW_SONIC_LC &&
+ ndev->dr_sw == 0) { /* huh? */
+ return MACSONIC_APPLE16;
+ }
return -1;
}
@@ -494,12 +416,12 @@ int __init mac_nubus_sonic_probe(struct net_device* dev)
{
static int slots;
struct nubus_dev* ndev = NULL;
+ struct sonic_local* lp = netdev_priv(dev);
unsigned long base_addr, prom_addr;
u16 sonic_dcr;
- int id;
- int i;
- int dma_bitmode;
-
+ int id = -1;
+ int reg_offset, dma_bitmode;
+
/* Find the first SONIC that hasn't been initialized already */
while ((ndev = nubus_find_type(NUBUS_CAT_NETWORK,
NUBUS_TYPE_ETHERNET, ndev)) != NULL)
@@ -521,51 +443,52 @@ int __init mac_nubus_sonic_probe(struct net_device* dev)
case MACSONIC_DUODOCK:
base_addr = ndev->board->slot_addr + DUODOCK_SONIC_REGISTERS;
prom_addr = ndev->board->slot_addr + DUODOCK_SONIC_PROM_BASE;
- sonic_dcr = SONIC_DCR_EXBUS | SONIC_DCR_RFT0 | SONIC_DCR_RFT1
- | SONIC_DCR_TFT0;
+ sonic_dcr = SONIC_DCR_EXBUS | SONIC_DCR_RFT0 | SONIC_DCR_RFT1 |
+ SONIC_DCR_TFT0;
reg_offset = 2;
- dma_bitmode = 1;
+ dma_bitmode = SONIC_BITMODE32;
break;
case MACSONIC_APPLE:
base_addr = ndev->board->slot_addr + APPLE_SONIC_REGISTERS;
prom_addr = ndev->board->slot_addr + APPLE_SONIC_PROM_BASE;
sonic_dcr = SONIC_DCR_BMS | SONIC_DCR_RFT1 | SONIC_DCR_TFT0;
reg_offset = 0;
- dma_bitmode = 1;
+ dma_bitmode = SONIC_BITMODE32;
break;
case MACSONIC_APPLE16:
base_addr = ndev->board->slot_addr + APPLE_SONIC_REGISTERS;
prom_addr = ndev->board->slot_addr + APPLE_SONIC_PROM_BASE;
- sonic_dcr = SONIC_DCR_EXBUS
- | SONIC_DCR_RFT1 | SONIC_DCR_TFT0
- | SONIC_DCR_PO1 | SONIC_DCR_BMS;
+ sonic_dcr = SONIC_DCR_EXBUS | SONIC_DCR_RFT1 | SONIC_DCR_TFT0 |
+ SONIC_DCR_PO1 | SONIC_DCR_BMS;
reg_offset = 0;
- dma_bitmode = 0;
+ dma_bitmode = SONIC_BITMODE16;
break;
case MACSONIC_DAYNALINK:
base_addr = ndev->board->slot_addr + APPLE_SONIC_REGISTERS;
prom_addr = ndev->board->slot_addr + DAYNALINK_PROM_BASE;
- sonic_dcr = SONIC_DCR_RFT1 | SONIC_DCR_TFT0
- | SONIC_DCR_PO1 | SONIC_DCR_BMS;
+ sonic_dcr = SONIC_DCR_RFT1 | SONIC_DCR_TFT0 |
+ SONIC_DCR_PO1 | SONIC_DCR_BMS;
reg_offset = 0;
- dma_bitmode = 0;
+ dma_bitmode = SONIC_BITMODE16;
break;
case MACSONIC_DAYNA:
base_addr = ndev->board->slot_addr + DAYNA_SONIC_REGISTERS;
prom_addr = ndev->board->slot_addr + DAYNA_SONIC_MAC_ADDR;
- sonic_dcr = SONIC_DCR_BMS
- | SONIC_DCR_RFT1 | SONIC_DCR_TFT0 | SONIC_DCR_PO1;
+ sonic_dcr = SONIC_DCR_BMS |
+ SONIC_DCR_RFT1 | SONIC_DCR_TFT0 | SONIC_DCR_PO1;
reg_offset = 0;
- dma_bitmode = 0;
+ dma_bitmode = SONIC_BITMODE16;
break;
default:
printk(KERN_ERR "macsonic: WTF, id is %d\n", id);
return -ENODEV;
}
- /* Danger! My arms are flailing wildly! You *must* set this
- before using sonic_read() */
+ /* Danger! My arms are flailing wildly! You *must* set lp->reg_offset
+ * and dev->base_addr before using SONIC_READ() or SONIC_WRITE() */
dev->base_addr = base_addr;
+ lp->reg_offset = reg_offset;
+ lp->dma_bitmode = dma_bitmode;
dev->irq = SLOT2IRQ(ndev->board->slot);
if (!sonic_version_printed) {
@@ -573,29 +496,66 @@ int __init mac_nubus_sonic_probe(struct net_device* dev)
sonic_version_printed = 1;
}
printk(KERN_INFO "%s: %s in slot %X\n",
- dev->name, ndev->board->name, ndev->board->slot);
+ lp->device->bus_id, ndev->board->name, ndev->board->slot);
printk(KERN_INFO "%s: revision 0x%04x, using %d bit DMA and register offset %d\n",
- dev->name, sonic_read(dev, SONIC_SR), dma_bitmode?32:16, reg_offset);
+ lp->device->bus_id, SONIC_READ(SONIC_SR), dma_bitmode?32:16, reg_offset);
- if(reg_offset) {
- printk("%s: register offset unsupported. please fix this if you know what it is.\n", dev->name);
- return -ENODEV;
- }
+#if 0 /* This is sometimes useful to find out how MacOS configured the card. */
+ printk(KERN_INFO "%s: DCR: 0x%04x, DCR2: 0x%04x\n", lp->device->bus_id,
+ SONIC_READ(SONIC_DCR) & 0xffff, SONIC_READ(SONIC_DCR2) & 0xffff);
+#endif
/* Software reset, then initialize control registers. */
- sonic_write(dev, SONIC_CMD, SONIC_CR_RST);
- sonic_write(dev, SONIC_DCR, sonic_dcr
- | (dma_bitmode ? SONIC_DCR_DW : 0));
+ SONIC_WRITE(SONIC_CMD, SONIC_CR_RST);
+ SONIC_WRITE(SONIC_DCR, sonic_dcr | (dma_bitmode ? SONIC_DCR_DW : 0));
+ /* This *must* be written back to in order to restore the
+ * extended programmable output bits, since it may not have been
+ * initialised since the hardware reset. */
+ SONIC_WRITE(SONIC_DCR2, 0);
/* Clear *and* disable interrupts to be on the safe side */
- sonic_write(dev, SONIC_ISR,0x7fff);
- sonic_write(dev, SONIC_IMR,0);
+ SONIC_WRITE(SONIC_IMR, 0);
+ SONIC_WRITE(SONIC_ISR, 0x7fff);
/* Now look for the MAC address. */
if (mac_nubus_sonic_ethernet_addr(dev, prom_addr, id) != 0)
return -ENODEV;
- printk(KERN_INFO "MAC ");
+ /* Shared init code */
+ return macsonic_init(dev);
+}
+
+static int __init mac_sonic_probe(struct device *device)
+{
+ struct net_device *dev;
+ struct sonic_local *lp;
+ int err;
+ int i;
+
+ dev = alloc_etherdev(sizeof(struct sonic_local));
+ if (!dev)
+ return -ENOMEM;
+
+ lp = netdev_priv(dev);
+ lp->device = device;
+ SET_NETDEV_DEV(dev, device);
+ SET_MODULE_OWNER(dev);
+
+ /* This will catch fatal stuff like -ENOMEM as well as success */
+ err = mac_onboard_sonic_probe(dev);
+ if (err == 0)
+ goto found;
+ if (err != -ENODEV)
+ goto out;
+ err = mac_nubus_sonic_probe(dev);
+ if (err)
+ goto out;
+found:
+ err = register_netdev(dev);
+ if (err)
+ goto out;
+
+ printk("%s: MAC ", dev->name);
for (i = 0; i < 6; i++) {
printk("%2.2x", dev->dev_addr[i]);
if (i < 5)
@@ -603,55 +563,95 @@ int __init mac_nubus_sonic_probe(struct net_device* dev)
}
printk(" IRQ %d\n", dev->irq);
- /* Shared init code */
- return macsonic_init(dev);
-}
+ return 0;
-#ifdef MODULE
-static struct net_device *dev_macsonic;
+out:
+ free_netdev(dev);
-MODULE_PARM(sonic_debug, "i");
+ return err;
+}
+
+MODULE_DESCRIPTION("Macintosh SONIC ethernet driver");
+module_param(sonic_debug, int, 0);
MODULE_PARM_DESC(sonic_debug, "macsonic debug level (1-4)");
-int
-init_module(void)
+#define SONIC_IRQ_FLAG IRQ_FLG_FAST
+
+#include "sonic.c"
+
+static int __devexit mac_sonic_device_remove (struct device *device)
{
- dev_macsonic = macsonic_probe(-1);
- if (IS_ERR(dev_macsonic)) {
- printk(KERN_WARNING "macsonic.c: No card found\n");
- return PTR_ERR(dev_macsonic);
- }
+ struct net_device *dev = device->driver_data;
+ struct sonic_local* lp = netdev_priv(dev);
+
+ unregister_netdev (dev);
+ dma_free_coherent(lp->device, SIZEOF_SONIC_DESC * SONIC_BUS_SCALE(lp->dma_bitmode),
+ lp->descriptors, lp->descriptors_laddr);
+ free_netdev (dev);
+
return 0;
}
-void
-cleanup_module(void)
+static struct device_driver mac_sonic_driver = {
+ .name = mac_sonic_string,
+ .bus = &platform_bus_type,
+ .probe = mac_sonic_probe,
+ .remove = __devexit_p(mac_sonic_device_remove),
+};
+
+static void mac_sonic_platform_release(struct device *device)
{
- unregister_netdev(dev_macsonic);
- kfree(dev_macsonic->priv);
- free_netdev(dev_macsonic);
+ struct platform_device *pldev;
+
+ /* free device */
+ pldev = to_platform_device (device);
+ kfree (pldev);
}
-#endif /* MODULE */
+static int __init mac_sonic_init_module(void)
+{
+ struct platform_device *pldev;
+ int err;
-#define vdma_alloc(foo, bar) ((u32)foo)
-#define vdma_free(baz)
-#define sonic_chiptomem(bat) (bat)
-#define PHYSADDR(quux) (quux)
-#define CPHYSADDR(quux) (quux)
+ if ((err = driver_register(&mac_sonic_driver))) {
+ printk(KERN_ERR "Driver registration failed\n");
+ return err;
+ }
-#define sonic_request_irq request_irq
-#define sonic_free_irq free_irq
+ mac_sonic_device = NULL;
-#include "sonic.c"
+ if (!(pldev = kmalloc (sizeof (*pldev), GFP_KERNEL))) {
+ goto out_unregister;
+ }
-/*
- * Local variables:
- * compile-command: "m68k-linux-gcc -D__KERNEL__ -I../../include -Wall -Wstrict-prototypes -O2 -fomit-frame-pointer -pipe -fno-strength-reduce -ffixed-a2 -DMODULE -DMODVERSIONS -include ../../include/linux/modversions.h -c -o macsonic.o macsonic.c"
- * version-control: t
- * kept-new-versions: 5
- * c-indent-level: 8
- * tab-width: 8
- * End:
- *
- */
+ memset(pldev, 0, sizeof (*pldev));
+ pldev->name = mac_sonic_string;
+ pldev->id = 0;
+ pldev->dev.release = mac_sonic_platform_release;
+ mac_sonic_device = pldev;
+
+ if (platform_device_register (pldev)) {
+ kfree(pldev);
+ mac_sonic_device = NULL;
+ }
+
+ return 0;
+
+out_unregister:
+ platform_device_unregister(pldev);
+
+ return -ENOMEM;
+}
+
+static void __exit mac_sonic_cleanup_module(void)
+{
+ driver_unregister(&mac_sonic_driver);
+
+ if (mac_sonic_device) {
+ platform_device_unregister(mac_sonic_device);
+ mac_sonic_device = NULL;
+ }
+}
+
+module_init(mac_sonic_init_module);
+module_exit(mac_sonic_cleanup_module);
diff --git a/drivers/net/mv643xx_eth.c b/drivers/net/mv643xx_eth.c
index 0405e1f0d3d..fb6b232069d 100644
--- a/drivers/net/mv643xx_eth.c
+++ b/drivers/net/mv643xx_eth.c
@@ -1157,16 +1157,20 @@ static int mv643xx_eth_start_xmit(struct sk_buff *skb, struct net_device *dev)
if (!skb_shinfo(skb)->nr_frags) {
linear:
if (skb->ip_summed != CHECKSUM_HW) {
+ /* Errata BTS #50, IHL must be 5 if no HW checksum */
pkt_info.cmd_sts = ETH_TX_ENABLE_INTERRUPT |
- ETH_TX_FIRST_DESC | ETH_TX_LAST_DESC;
+ ETH_TX_FIRST_DESC |
+ ETH_TX_LAST_DESC |
+ 5 << ETH_TX_IHL_SHIFT;
pkt_info.l4i_chk = 0;
} else {
- u32 ipheader = skb->nh.iph->ihl << 11;
pkt_info.cmd_sts = ETH_TX_ENABLE_INTERRUPT |
- ETH_TX_FIRST_DESC | ETH_TX_LAST_DESC |
- ETH_GEN_TCP_UDP_CHECKSUM |
- ETH_GEN_IP_V_4_CHECKSUM | ipheader;
+ ETH_TX_FIRST_DESC |
+ ETH_TX_LAST_DESC |
+ ETH_GEN_TCP_UDP_CHECKSUM |
+ ETH_GEN_IP_V_4_CHECKSUM |
+ skb->nh.iph->ihl << ETH_TX_IHL_SHIFT;
/* CPU already calculated pseudo header checksum. */
if (skb->nh.iph->protocol == IPPROTO_UDP) {
pkt_info.cmd_sts |= ETH_UDP_FRAME;
@@ -1193,7 +1197,6 @@ linear:
stats->tx_bytes += pkt_info.byte_cnt;
} else {
unsigned int frag;
- u32 ipheader;
/* Since hardware can't handle unaligned fragments smaller
* than 9 bytes, if we find any, we linearize the skb
@@ -1222,12 +1225,16 @@ linear:
DMA_TO_DEVICE);
pkt_info.l4i_chk = 0;
pkt_info.return_info = 0;
- pkt_info.cmd_sts = ETH_TX_FIRST_DESC;
- if (skb->ip_summed == CHECKSUM_HW) {
- ipheader = skb->nh.iph->ihl << 11;
- pkt_info.cmd_sts |= ETH_GEN_TCP_UDP_CHECKSUM |
- ETH_GEN_IP_V_4_CHECKSUM | ipheader;
+ if (skb->ip_summed != CHECKSUM_HW)
+ /* Errata BTS #50, IHL must be 5 if no HW checksum */
+ pkt_info.cmd_sts = ETH_TX_FIRST_DESC |
+ 5 << ETH_TX_IHL_SHIFT;
+ else {
+ pkt_info.cmd_sts = ETH_TX_FIRST_DESC |
+ ETH_GEN_TCP_UDP_CHECKSUM |
+ ETH_GEN_IP_V_4_CHECKSUM |
+ skb->nh.iph->ihl << ETH_TX_IHL_SHIFT;
/* CPU already calculated pseudo header checksum. */
if (skb->nh.iph->protocol == IPPROTO_UDP) {
pkt_info.cmd_sts |= ETH_UDP_FRAME;
diff --git a/drivers/net/mv643xx_eth.h b/drivers/net/mv643xx_eth.h
index 57c4f8fbfdb..7678b59c295 100644
--- a/drivers/net/mv643xx_eth.h
+++ b/drivers/net/mv643xx_eth.h
@@ -49,7 +49,7 @@
/* Checksum offload for Tx works for most packets, but
* fails if previous packet sent did not use hw csum
*/
-#undef MV643XX_CHECKSUM_OFFLOAD_TX
+#define MV643XX_CHECKSUM_OFFLOAD_TX
#define MV643XX_NAPI
#define MV643XX_TX_FAST_REFILL
#undef MV643XX_RX_QUEUE_FILL_ON_TASK /* Does not work, yet */
@@ -217,6 +217,8 @@
#define ETH_TX_ENABLE_INTERRUPT (BIT23)
#define ETH_AUTO_MODE (BIT30)
+#define ETH_TX_IHL_SHIFT 11
+
/* typedefs */
typedef enum _eth_func_ret_status {
diff --git a/drivers/net/pci-skeleton.c b/drivers/net/pci-skeleton.c
index 4a391ea0f58..a1ac4bd1696 100644
--- a/drivers/net/pci-skeleton.c
+++ b/drivers/net/pci-skeleton.c
@@ -486,9 +486,9 @@ struct netdrv_private {
MODULE_AUTHOR ("Jeff Garzik <jgarzik@pobox.com>");
MODULE_DESCRIPTION ("Skeleton for a PCI Fast Ethernet driver");
MODULE_LICENSE("GPL");
-MODULE_PARM (multicast_filter_limit, "i");
-MODULE_PARM (max_interrupt_work, "i");
-MODULE_PARM (media, "1-" __MODULE_STRING(8) "i");
+module_param(multicast_filter_limit, int, 0);
+module_param(max_interrupt_work, int, 0);
+module_param_array(media, int, NULL, 0);
MODULE_PARM_DESC (multicast_filter_limit, "pci-skeleton maximum number of filtered multicast addresses");
MODULE_PARM_DESC (max_interrupt_work, "pci-skeleton maximum events handled per interrupt");
MODULE_PARM_DESC (media, "pci-skeleton: Bits 0-3: media type, bit 17: full duplex");
diff --git a/drivers/net/pcmcia/fmvj18x_cs.c b/drivers/net/pcmcia/fmvj18x_cs.c
index 9d8197bb293..384a736a0d2 100644
--- a/drivers/net/pcmcia/fmvj18x_cs.c
+++ b/drivers/net/pcmcia/fmvj18x_cs.c
@@ -134,7 +134,7 @@ typedef struct local_info_t {
u_char mc_filter[8];
} local_info_t;
-#define MC_FILTERBREAK 64
+#define MC_FILTERBREAK 8
/*====================================================================*/
/*
@@ -1012,7 +1012,7 @@ static void fjn_reset(struct net_device *dev)
outb(BANK_1U, ioaddr + CONFIG_1);
/* set the multicast table to accept none. */
- for (i = 0; i < 6; i++)
+ for (i = 0; i < 8; i++)
outb(0x00, ioaddr + MAR_ADR + i);
/* Switch to bank 2 (runtime mode) */
@@ -1269,6 +1269,16 @@ static void set_rx_mode(struct net_device *dev)
u_long flags;
int i;
+ int saved_config_0 = inb(ioaddr + CONFIG_0);
+
+ local_irq_save(flags);
+
+ /* Disable Tx and Rx */
+ if (sram_config == 0)
+ outb(CONFIG0_RST, ioaddr + CONFIG_0);
+ else
+ outb(CONFIG0_RST_1, ioaddr + CONFIG_0);
+
if (dev->flags & IFF_PROMISC) {
/* Unconditionally log net taps. */
printk("%s: Promiscuous mode enabled.\n", dev->name);
@@ -1290,20 +1300,23 @@ static void set_rx_mode(struct net_device *dev)
for (i = 0, mclist = dev->mc_list; mclist && i < dev->mc_count;
i++, mclist = mclist->next) {
unsigned int bit =
- ether_crc_le(ETH_ALEN, mclist->dmi_addr) & 0x3f;
- mc_filter[bit >> 3] |= (1 << bit);
+ ether_crc_le(ETH_ALEN, mclist->dmi_addr) >> 26;
+ mc_filter[bit >> 3] |= (1 << (bit & 7));
}
+ outb(2, ioaddr + RX_MODE); /* Use normal mode. */
}
- local_irq_save(flags);
if (memcmp(mc_filter, lp->mc_filter, sizeof(mc_filter))) {
int saved_bank = inb(ioaddr + CONFIG_1);
/* Switch to bank 1 and set the multicast table. */
outb(0xe4, ioaddr + CONFIG_1);
for (i = 0; i < 8; i++)
- outb(mc_filter[i], ioaddr + 8 + i);
+ outb(mc_filter[i], ioaddr + MAR_ADR + i);
memcpy(lp->mc_filter, mc_filter, sizeof(mc_filter));
outb(saved_bank, ioaddr + CONFIG_1);
}
+
+ outb(saved_config_0, ioaddr + CONFIG_0);
+
local_irq_restore(flags);
}
diff --git a/drivers/net/phy/Kconfig b/drivers/net/phy/Kconfig
new file mode 100644
index 00000000000..6a2fe358347
--- /dev/null
+++ b/drivers/net/phy/Kconfig
@@ -0,0 +1,57 @@
+#
+# PHY Layer Configuration
+#
+
+menu "PHY device support"
+
+config PHYLIB
+ tristate "PHY Device support and infrastructure"
+ depends on NET_ETHERNET
+ help
+ Ethernet controllers are usually attached to PHY
+ devices. This option provides infrastructure for
+ managing PHY devices.
+
+config PHYCONTROL
+ bool " Support for automatically handling PHY state changes"
+ depends on PHYLIB
+ help
+ Adds code to perform all the work for keeping PHY link
+ state (speed/duplex/etc) up-to-date. Also handles
+ interrupts.
+
+comment "MII PHY device drivers"
+ depends on PHYLIB
+
+config MARVELL_PHY
+ tristate "Drivers for Marvell PHYs"
+ depends on PHYLIB
+ ---help---
+ Currently has a driver for the 88E1011S
+
+config DAVICOM_PHY
+ tristate "Drivers for Davicom PHYs"
+ depends on PHYLIB
+ ---help---
+ Currently supports dm9161e and dm9131
+
+config QSEMI_PHY
+ tristate "Drivers for Quality Semiconductor PHYs"
+ depends on PHYLIB
+ ---help---
+ Currently supports the qs6612
+
+config LXT_PHY
+ tristate "Drivers for the Intel LXT PHYs"
+ depends on PHYLIB
+ ---help---
+ Currently supports the lxt970, lxt971
+
+config CICADA_PHY
+ tristate "Drivers for the Cicada PHYs"
+ depends on PHYLIB
+ ---help---
+ Currently supports the cis8204
+
+endmenu
+
diff --git a/drivers/net/phy/Makefile b/drivers/net/phy/Makefile
new file mode 100644
index 00000000000..e4116a5fbb4
--- /dev/null
+++ b/drivers/net/phy/Makefile
@@ -0,0 +1,10 @@
+# Makefile for Linux PHY drivers
+
+libphy-objs := phy.o phy_device.o mdio_bus.o
+
+obj-$(CONFIG_PHYLIB) += libphy.o
+obj-$(CONFIG_MARVELL_PHY) += marvell.o
+obj-$(CONFIG_DAVICOM_PHY) += davicom.o
+obj-$(CONFIG_CICADA_PHY) += cicada.o
+obj-$(CONFIG_LXT_PHY) += lxt.o
+obj-$(CONFIG_QSEMI_PHY) += qsemi.o
diff --git a/drivers/net/phy/cicada.c b/drivers/net/phy/cicada.c
new file mode 100644
index 00000000000..c47fb2ecd14
--- /dev/null
+++ b/drivers/net/phy/cicada.c
@@ -0,0 +1,134 @@
+/*
+ * drivers/net/phy/cicada.c
+ *
+ * Driver for Cicada PHYs
+ *
+ * Author: Andy Fleming
+ *
+ * Copyright (c) 2004 Freescale Semiconductor, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ *
+ */
+#include <linux/config.h>
+#include <linux/kernel.h>
+#include <linux/sched.h>
+#include <linux/string.h>
+#include <linux/errno.h>
+#include <linux/unistd.h>
+#include <linux/slab.h>
+#include <linux/interrupt.h>
+#include <linux/init.h>
+#include <linux/delay.h>
+#include <linux/netdevice.h>
+#include <linux/etherdevice.h>
+#include <linux/skbuff.h>
+#include <linux/spinlock.h>
+#include <linux/mm.h>
+#include <linux/module.h>
+#include <linux/version.h>
+#include <linux/mii.h>
+#include <linux/ethtool.h>
+#include <linux/phy.h>
+
+#include <asm/io.h>
+#include <asm/irq.h>
+#include <asm/uaccess.h>
+
+/* Cicada Extended Control Register 1 */
+#define MII_CIS8201_EXT_CON1 0x17
+#define MII_CIS8201_EXTCON1_INIT 0x0000
+
+/* Cicada Interrupt Mask Register */
+#define MII_CIS8201_IMASK 0x19
+#define MII_CIS8201_IMASK_IEN 0x8000
+#define MII_CIS8201_IMASK_SPEED 0x4000
+#define MII_CIS8201_IMASK_LINK 0x2000
+#define MII_CIS8201_IMASK_DUPLEX 0x1000
+#define MII_CIS8201_IMASK_MASK 0xf000
+
+/* Cicada Interrupt Status Register */
+#define MII_CIS8201_ISTAT 0x1a
+#define MII_CIS8201_ISTAT_STATUS 0x8000
+#define MII_CIS8201_ISTAT_SPEED 0x4000
+#define MII_CIS8201_ISTAT_LINK 0x2000
+#define MII_CIS8201_ISTAT_DUPLEX 0x1000
+
+/* Cicada Auxiliary Control/Status Register */
+#define MII_CIS8201_AUX_CONSTAT 0x1c
+#define MII_CIS8201_AUXCONSTAT_INIT 0x0004
+#define MII_CIS8201_AUXCONSTAT_DUPLEX 0x0020
+#define MII_CIS8201_AUXCONSTAT_SPEED 0x0018
+#define MII_CIS8201_AUXCONSTAT_GBIT 0x0010
+#define MII_CIS8201_AUXCONSTAT_100 0x0008
+
+MODULE_DESCRIPTION("Cicadia PHY driver");
+MODULE_AUTHOR("Andy Fleming");
+MODULE_LICENSE("GPL");
+
+static int cis820x_config_init(struct phy_device *phydev)
+{
+ int err;
+
+ err = phy_write(phydev, MII_CIS8201_AUX_CONSTAT,
+ MII_CIS8201_AUXCONSTAT_INIT);
+
+ if (err < 0)
+ return err;
+
+ err = phy_write(phydev, MII_CIS8201_EXT_CON1,
+ MII_CIS8201_EXTCON1_INIT);
+
+ return err;
+}
+
+static int cis820x_ack_interrupt(struct phy_device *phydev)
+{
+ int err = phy_read(phydev, MII_CIS8201_ISTAT);
+
+ return (err < 0) ? err : 0;
+}
+
+static int cis820x_config_intr(struct phy_device *phydev)
+{
+ int err;
+
+ if(phydev->interrupts == PHY_INTERRUPT_ENABLED)
+ err = phy_write(phydev, MII_CIS8201_IMASK,
+ MII_CIS8201_IMASK_MASK);
+ else
+ err = phy_write(phydev, MII_CIS8201_IMASK, 0);
+
+ return err;
+}
+
+/* Cicada 820x */
+static struct phy_driver cis8204_driver = {
+ .phy_id = 0x000fc440,
+ .name = "Cicada Cis8204",
+ .phy_id_mask = 0x000fffc0,
+ .features = PHY_GBIT_FEATURES,
+ .flags = PHY_HAS_INTERRUPT,
+ .config_init = &cis820x_config_init,
+ .config_aneg = &genphy_config_aneg,
+ .read_status = &genphy_read_status,
+ .ack_interrupt = &cis820x_ack_interrupt,
+ .config_intr = &cis820x_config_intr,
+ .driver = { .owner = THIS_MODULE,},
+};
+
+static int __init cis8204_init(void)
+{
+ return phy_driver_register(&cis8204_driver);
+}
+
+static void __exit cis8204_exit(void)
+{
+ phy_driver_unregister(&cis8204_driver);
+}
+
+module_init(cis8204_init);
+module_exit(cis8204_exit);
diff --git a/drivers/net/phy/davicom.c b/drivers/net/phy/davicom.c
new file mode 100644
index 00000000000..6caf499fae3
--- /dev/null
+++ b/drivers/net/phy/davicom.c
@@ -0,0 +1,195 @@
+/*
+ * drivers/net/phy/davicom.c
+ *
+ * Driver for Davicom PHYs
+ *
+ * Author: Andy Fleming
+ *
+ * Copyright (c) 2004 Freescale Semiconductor, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ *
+ */
+#include <linux/config.h>
+#include <linux/kernel.h>
+#include <linux/sched.h>
+#include <linux/string.h>
+#include <linux/errno.h>
+#include <linux/unistd.h>
+#include <linux/slab.h>
+#include <linux/interrupt.h>
+#include <linux/init.h>
+#include <linux/delay.h>
+#include <linux/netdevice.h>
+#include <linux/etherdevice.h>
+#include <linux/skbuff.h>
+#include <linux/spinlock.h>
+#include <linux/mm.h>
+#include <linux/module.h>
+#include <linux/version.h>
+#include <linux/mii.h>
+#include <linux/ethtool.h>
+#include <linux/phy.h>
+
+#include <asm/io.h>
+#include <asm/irq.h>
+#include <asm/uaccess.h>
+
+#define MII_DM9161_SCR 0x10
+#define MII_DM9161_SCR_INIT 0x0610
+
+/* DM9161 Interrupt Register */
+#define MII_DM9161_INTR 0x15
+#define MII_DM9161_INTR_PEND 0x8000
+#define MII_DM9161_INTR_DPLX_MASK 0x0800
+#define MII_DM9161_INTR_SPD_MASK 0x0400
+#define MII_DM9161_INTR_LINK_MASK 0x0200
+#define MII_DM9161_INTR_MASK 0x0100
+#define MII_DM9161_INTR_DPLX_CHANGE 0x0010
+#define MII_DM9161_INTR_SPD_CHANGE 0x0008
+#define MII_DM9161_INTR_LINK_CHANGE 0x0004
+#define MII_DM9161_INTR_INIT 0x0000
+#define MII_DM9161_INTR_STOP \
+(MII_DM9161_INTR_DPLX_MASK | MII_DM9161_INTR_SPD_MASK \
+ | MII_DM9161_INTR_LINK_MASK | MII_DM9161_INTR_MASK)
+
+/* DM9161 10BT Configuration/Status */
+#define MII_DM9161_10BTCSR 0x12
+#define MII_DM9161_10BTCSR_INIT 0x7800
+
+MODULE_DESCRIPTION("Davicom PHY driver");
+MODULE_AUTHOR("Andy Fleming");
+MODULE_LICENSE("GPL");
+
+
+#define DM9161_DELAY 1
+static int dm9161_config_intr(struct phy_device *phydev)
+{
+ int temp;
+
+ temp = phy_read(phydev, MII_DM9161_INTR);
+
+ if (temp < 0)
+ return temp;
+
+ if(PHY_INTERRUPT_ENABLED == phydev->interrupts )
+ temp &= ~(MII_DM9161_INTR_STOP);
+ else
+ temp |= MII_DM9161_INTR_STOP;
+
+ temp = phy_write(phydev, MII_DM9161_INTR, temp);
+
+ return temp;
+}
+
+static int dm9161_config_aneg(struct phy_device *phydev)
+{
+ int err;
+
+ /* Isolate the PHY */
+ err = phy_write(phydev, MII_BMCR, BMCR_ISOLATE);
+
+ if (err < 0)
+ return err;
+
+ /* Configure the new settings */
+ err = genphy_config_aneg(phydev);
+
+ if (err < 0)
+ return err;
+
+ return 0;
+}
+
+static int dm9161_config_init(struct phy_device *phydev)
+{
+ int err;
+
+ /* Isolate the PHY */
+ err = phy_write(phydev, MII_BMCR, BMCR_ISOLATE);
+
+ if (err < 0)
+ return err;
+
+ /* Do not bypass the scrambler/descrambler */
+ err = phy_write(phydev, MII_DM9161_SCR, MII_DM9161_SCR_INIT);
+
+ if (err < 0)
+ return err;
+
+ /* Clear 10BTCSR to default */
+ err = phy_write(phydev, MII_DM9161_10BTCSR, MII_DM9161_10BTCSR_INIT);
+
+ if (err < 0)
+ return err;
+
+ /* Reconnect the PHY, and enable Autonegotiation */
+ err = phy_write(phydev, MII_BMCR, BMCR_ANENABLE);
+
+ if (err < 0)
+ return err;
+
+ return 0;
+}
+
+static int dm9161_ack_interrupt(struct phy_device *phydev)
+{
+ int err = phy_read(phydev, MII_DM9161_INTR);
+
+ return (err < 0) ? err : 0;
+}
+
+static struct phy_driver dm9161_driver = {
+ .phy_id = 0x0181b880,
+ .name = "Davicom DM9161E",
+ .phy_id_mask = 0x0ffffff0,
+ .features = PHY_BASIC_FEATURES,
+ .config_init = dm9161_config_init,
+ .config_aneg = dm9161_config_aneg,
+ .read_status = genphy_read_status,
+ .driver = { .owner = THIS_MODULE,},
+};
+
+static struct phy_driver dm9131_driver = {
+ .phy_id = 0x00181b80,
+ .name = "Davicom DM9131",
+ .phy_id_mask = 0x0ffffff0,
+ .features = PHY_BASIC_FEATURES,
+ .flags = PHY_HAS_INTERRUPT,
+ .config_aneg = genphy_config_aneg,
+ .read_status = genphy_read_status,
+ .ack_interrupt = dm9161_ack_interrupt,
+ .config_intr = dm9161_config_intr,
+ .driver = { .owner = THIS_MODULE,},
+};
+
+static int __init davicom_init(void)
+{
+ int ret;
+
+ ret = phy_driver_register(&dm9161_driver);
+ if (ret)
+ goto err1;
+
+ ret = phy_driver_register(&dm9131_driver);
+ if (ret)
+ goto err2;
+ return 0;
+
+ err2:
+ phy_driver_unregister(&dm9161_driver);
+ err1:
+ return ret;
+}
+
+static void __exit davicom_exit(void)
+{
+ phy_driver_unregister(&dm9161_driver);
+ phy_driver_unregister(&dm9131_driver);
+}
+
+module_init(davicom_init);
+module_exit(davicom_exit);
diff --git a/drivers/net/phy/lxt.c b/drivers/net/phy/lxt.c
new file mode 100644
index 00000000000..4c840448ec8
--- /dev/null
+++ b/drivers/net/phy/lxt.c
@@ -0,0 +1,179 @@
+/*
+ * drivers/net/phy/lxt.c
+ *
+ * Driver for Intel LXT PHYs
+ *
+ * Author: Andy Fleming
+ *
+ * Copyright (c) 2004 Freescale Semiconductor, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ *
+ */
+#include <linux/config.h>
+#include <linux/kernel.h>
+#include <linux/sched.h>
+#include <linux/string.h>
+#include <linux/errno.h>
+#include <linux/unistd.h>
+#include <linux/slab.h>
+#include <linux/interrupt.h>
+#include <linux/init.h>
+#include <linux/delay.h>
+#include <linux/netdevice.h>
+#include <linux/etherdevice.h>
+#include <linux/skbuff.h>
+#include <linux/spinlock.h>
+#include <linux/mm.h>
+#include <linux/module.h>
+#include <linux/version.h>
+#include <linux/mii.h>
+#include <linux/ethtool.h>
+#include <linux/phy.h>
+
+#include <asm/io.h>
+#include <asm/irq.h>
+#include <asm/uaccess.h>
+
+/* The Level one LXT970 is used by many boards */
+
+#define MII_LXT970_IER 17 /* Interrupt Enable Register */
+
+#define MII_LXT970_IER_IEN 0x0002
+
+#define MII_LXT970_ISR 18 /* Interrupt Status Register */
+
+#define MII_LXT970_CONFIG 19 /* Configuration Register */
+
+/* ------------------------------------------------------------------------- */
+/* The Level one LXT971 is used on some of my custom boards */
+
+/* register definitions for the 971 */
+#define MII_LXT971_IER 18 /* Interrupt Enable Register */
+#define MII_LXT971_IER_IEN 0x00f2
+
+#define MII_LXT971_ISR 19 /* Interrupt Status Register */
+
+
+MODULE_DESCRIPTION("Intel LXT PHY driver");
+MODULE_AUTHOR("Andy Fleming");
+MODULE_LICENSE("GPL");
+
+static int lxt970_ack_interrupt(struct phy_device *phydev)
+{
+ int err;
+
+ err = phy_read(phydev, MII_BMSR);
+
+ if (err < 0)
+ return err;
+
+ err = phy_read(phydev, MII_LXT970_ISR);
+
+ if (err < 0)
+ return err;
+
+ return 0;
+}
+
+static int lxt970_config_intr(struct phy_device *phydev)
+{
+ int err;
+
+ if(phydev->interrupts == PHY_INTERRUPT_ENABLED)
+ err = phy_write(phydev, MII_LXT970_IER, MII_LXT970_IER_IEN);
+ else
+ err = phy_write(phydev, MII_LXT970_IER, 0);
+
+ return err;
+}
+
+static int lxt970_config_init(struct phy_device *phydev)
+{
+ int err;
+
+ err = phy_write(phydev, MII_LXT970_CONFIG, 0);
+
+ return err;
+}
+
+
+static int lxt971_ack_interrupt(struct phy_device *phydev)
+{
+ int err = phy_read(phydev, MII_LXT971_ISR);
+
+ if (err < 0)
+ return err;
+
+ return 0;
+}
+
+static int lxt971_config_intr(struct phy_device *phydev)
+{
+ int err;
+
+ if(phydev->interrupts == PHY_INTERRUPT_ENABLED)
+ err = phy_write(phydev, MII_LXT971_IER, MII_LXT971_IER_IEN);
+ else
+ err = phy_write(phydev, MII_LXT971_IER, 0);
+
+ return err;
+}
+
+static struct phy_driver lxt970_driver = {
+ .phy_id = 0x07810000,
+ .name = "LXT970",
+ .phy_id_mask = 0x0fffffff,
+ .features = PHY_BASIC_FEATURES,
+ .flags = PHY_HAS_INTERRUPT,
+ .config_init = lxt970_config_init,
+ .config_aneg = genphy_config_aneg,
+ .read_status = genphy_read_status,
+ .ack_interrupt = lxt970_ack_interrupt,
+ .config_intr = lxt970_config_intr,
+ .driver = { .owner = THIS_MODULE,},
+};
+
+static struct phy_driver lxt971_driver = {
+ .phy_id = 0x0001378e,
+ .name = "LXT971",
+ .phy_id_mask = 0x0fffffff,
+ .features = PHY_BASIC_FEATURES,
+ .flags = PHY_HAS_INTERRUPT,
+ .config_aneg = genphy_config_aneg,
+ .read_status = genphy_read_status,
+ .ack_interrupt = lxt971_ack_interrupt,
+ .config_intr = lxt971_config_intr,
+ .driver = { .owner = THIS_MODULE,},
+};
+
+static int __init lxt_init(void)
+{
+ int ret;
+
+ ret = phy_driver_register(&lxt970_driver);
+ if (ret)
+ goto err1;
+
+ ret = phy_driver_register(&lxt971_driver);
+ if (ret)
+ goto err2;
+ return 0;
+
+ err2:
+ phy_driver_unregister(&lxt970_driver);
+ err1:
+ return ret;
+}
+
+static void __exit lxt_exit(void)
+{
+ phy_driver_unregister(&lxt970_driver);
+ phy_driver_unregister(&lxt971_driver);
+}
+
+module_init(lxt_init);
+module_exit(lxt_exit);
diff --git a/drivers/net/phy/marvell.c b/drivers/net/phy/marvell.c
new file mode 100644
index 00000000000..4a72b025006
--- /dev/null
+++ b/drivers/net/phy/marvell.c
@@ -0,0 +1,140 @@
+/*
+ * drivers/net/phy/marvell.c
+ *
+ * Driver for Marvell PHYs
+ *
+ * Author: Andy Fleming
+ *
+ * Copyright (c) 2004 Freescale Semiconductor, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ *
+ */
+#include <linux/config.h>
+#include <linux/kernel.h>
+#include <linux/sched.h>
+#include <linux/string.h>
+#include <linux/errno.h>
+#include <linux/unistd.h>
+#include <linux/slab.h>
+#include <linux/interrupt.h>
+#include <linux/init.h>
+#include <linux/delay.h>
+#include <linux/netdevice.h>
+#include <linux/etherdevice.h>
+#include <linux/skbuff.h>
+#include <linux/spinlock.h>
+#include <linux/mm.h>
+#include <linux/module.h>
+#include <linux/version.h>
+#include <linux/mii.h>
+#include <linux/ethtool.h>
+#include <linux/phy.h>
+
+#include <asm/io.h>
+#include <asm/irq.h>
+#include <asm/uaccess.h>
+
+#define MII_M1011_IEVENT 0x13
+#define MII_M1011_IEVENT_CLEAR 0x0000
+
+#define MII_M1011_IMASK 0x12
+#define MII_M1011_IMASK_INIT 0x6400
+#define MII_M1011_IMASK_CLEAR 0x0000
+
+MODULE_DESCRIPTION("Marvell PHY driver");
+MODULE_AUTHOR("Andy Fleming");
+MODULE_LICENSE("GPL");
+
+static int marvell_ack_interrupt(struct phy_device *phydev)
+{
+ int err;
+
+ /* Clear the interrupts by reading the reg */
+ err = phy_read(phydev, MII_M1011_IEVENT);
+
+ if (err < 0)
+ return err;
+
+ return 0;
+}
+
+static int marvell_config_intr(struct phy_device *phydev)
+{
+ int err;
+
+ if(phydev->interrupts == PHY_INTERRUPT_ENABLED)
+ err = phy_write(phydev, MII_M1011_IMASK, MII_M1011_IMASK_INIT);
+ else
+ err = phy_write(phydev, MII_M1011_IMASK, MII_M1011_IMASK_CLEAR);
+
+ return err;
+}
+
+static int marvell_config_aneg(struct phy_device *phydev)
+{
+ int err;
+
+ /* The Marvell PHY has an errata which requires
+ * that certain registers get written in order
+ * to restart autonegotiation */
+ err = phy_write(phydev, MII_BMCR, BMCR_RESET);
+
+ if (err < 0)
+ return err;
+
+ err = phy_write(phydev, 0x1d, 0x1f);
+ if (err < 0)
+ return err;
+
+ err = phy_write(phydev, 0x1e, 0x200c);
+ if (err < 0)
+ return err;
+
+ err = phy_write(phydev, 0x1d, 0x5);
+ if (err < 0)
+ return err;
+
+ err = phy_write(phydev, 0x1e, 0);
+ if (err < 0)
+ return err;
+
+ err = phy_write(phydev, 0x1e, 0x100);
+ if (err < 0)
+ return err;
+
+
+ err = genphy_config_aneg(phydev);
+
+ return err;
+}
+
+
+static struct phy_driver m88e1101_driver = {
+ .phy_id = 0x01410c00,
+ .phy_id_mask = 0xffffff00,
+ .name = "Marvell 88E1101",
+ .features = PHY_GBIT_FEATURES,
+ .flags = PHY_HAS_INTERRUPT,
+ .config_aneg = &marvell_config_aneg,
+ .read_status = &genphy_read_status,
+ .ack_interrupt = &marvell_ack_interrupt,
+ .config_intr = &marvell_config_intr,
+ .driver = { .owner = THIS_MODULE,},
+};
+
+static int __init marvell_init(void)
+{
+ return phy_driver_register(&m88e1101_driver);
+}
+
+static void __exit marvell_exit(void)
+{
+ phy_driver_unregister(&m88e1101_driver);
+}
+
+module_init(marvell_init);
+module_exit(marvell_exit);
diff --git a/drivers/net/phy/mdio_bus.c b/drivers/net/phy/mdio_bus.c
new file mode 100644
index 00000000000..41f62c0c5fc
--- /dev/null
+++ b/drivers/net/phy/mdio_bus.c
@@ -0,0 +1,176 @@
+/*
+ * drivers/net/phy/mdio_bus.c
+ *
+ * MDIO Bus interface
+ *
+ * Author: Andy Fleming
+ *
+ * Copyright (c) 2004 Freescale Semiconductor, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ *
+ */
+#include <linux/config.h>
+#include <linux/kernel.h>
+#include <linux/sched.h>
+#include <linux/string.h>
+#include <linux/errno.h>
+#include <linux/unistd.h>
+#include <linux/slab.h>
+#include <linux/interrupt.h>
+#include <linux/init.h>
+#include <linux/delay.h>
+#include <linux/netdevice.h>
+#include <linux/etherdevice.h>
+#include <linux/skbuff.h>
+#include <linux/spinlock.h>
+#include <linux/mm.h>
+#include <linux/module.h>
+#include <linux/version.h>
+#include <linux/mii.h>
+#include <linux/ethtool.h>
+#include <linux/phy.h>
+
+#include <asm/io.h>
+#include <asm/irq.h>
+#include <asm/uaccess.h>
+
+/* mdiobus_register
+ *
+ * description: Called by a bus driver to bring up all the PHYs
+ * on a given bus, and attach them to the bus
+ */
+int mdiobus_register(struct mii_bus *bus)
+{
+ int i;
+ int err = 0;
+
+ spin_lock_init(&bus->mdio_lock);
+
+ if (NULL == bus || NULL == bus->name ||
+ NULL == bus->read ||
+ NULL == bus->write)
+ return -EINVAL;
+
+ if (bus->reset)
+ bus->reset(bus);
+
+ for (i = 0; i < PHY_MAX_ADDR; i++) {
+ struct phy_device *phydev;
+
+ phydev = get_phy_device(bus, i);
+
+ if (IS_ERR(phydev))
+ return PTR_ERR(phydev);
+
+ /* There's a PHY at this address
+ * We need to set:
+ * 1) IRQ
+ * 2) bus_id
+ * 3) parent
+ * 4) bus
+ * 5) mii_bus
+ * And, we need to register it */
+ if (phydev) {
+ phydev->irq = bus->irq[i];
+
+ phydev->dev.parent = bus->dev;
+ phydev->dev.bus = &mdio_bus_type;
+ sprintf(phydev->dev.bus_id, "phy%d:%d", bus->id, i);
+
+ phydev->bus = bus;
+
+ err = device_register(&phydev->dev);
+
+ if (err)
+ printk(KERN_ERR "phy %d failed to register\n",
+ i);
+ }
+
+ bus->phy_map[i] = phydev;
+ }
+
+ pr_info("%s: probed\n", bus->name);
+
+ return err;
+}
+EXPORT_SYMBOL(mdiobus_register);
+
+void mdiobus_unregister(struct mii_bus *bus)
+{
+ int i;
+
+ for (i = 0; i < PHY_MAX_ADDR; i++) {
+ if (bus->phy_map[i]) {
+ device_unregister(&bus->phy_map[i]->dev);
+ kfree(bus->phy_map[i]);
+ }
+ }
+}
+EXPORT_SYMBOL(mdiobus_unregister);
+
+/* mdio_bus_match
+ *
+ * description: Given a PHY device, and a PHY driver, return 1 if
+ * the driver supports the device. Otherwise, return 0
+ */
+static int mdio_bus_match(struct device *dev, struct device_driver *drv)
+{
+ struct phy_device *phydev = to_phy_device(dev);
+ struct phy_driver *phydrv = to_phy_driver(drv);
+
+ return (phydrv->phy_id == (phydev->phy_id & phydrv->phy_id_mask));
+}
+
+/* Suspend and resume. Copied from platform_suspend and
+ * platform_resume
+ */
+static int mdio_bus_suspend(struct device * dev, u32 state)
+{
+ int ret = 0;
+ struct device_driver *drv = dev->driver;
+
+ if (drv && drv->suspend) {
+ ret = drv->suspend(dev, state, SUSPEND_DISABLE);
+ if (ret == 0)
+ ret = drv->suspend(dev, state, SUSPEND_SAVE_STATE);
+ if (ret == 0)
+ ret = drv->suspend(dev, state, SUSPEND_POWER_DOWN);
+ }
+ return ret;
+}
+
+static int mdio_bus_resume(struct device * dev)
+{
+ int ret = 0;
+ struct device_driver *drv = dev->driver;
+
+ if (drv && drv->resume) {
+ ret = drv->resume(dev, RESUME_POWER_ON);
+ if (ret == 0)
+ ret = drv->resume(dev, RESUME_RESTORE_STATE);
+ if (ret == 0)
+ ret = drv->resume(dev, RESUME_ENABLE);
+ }
+ return ret;
+}
+
+struct bus_type mdio_bus_type = {
+ .name = "mdio_bus",
+ .match = mdio_bus_match,
+ .suspend = mdio_bus_suspend,
+ .resume = mdio_bus_resume,
+};
+
+int __init mdio_bus_init(void)
+{
+ return bus_register(&mdio_bus_type);
+}
+
+void __exit mdio_bus_exit(void)
+{
+ bus_unregister(&mdio_bus_type);
+}
diff --git a/drivers/net/phy/phy.c b/drivers/net/phy/phy.c
new file mode 100644
index 00000000000..d9e11f93bf3
--- /dev/null
+++ b/drivers/net/phy/phy.c
@@ -0,0 +1,871 @@
+/*
+ * drivers/net/phy/phy.c
+ *
+ * Framework for configuring and reading PHY devices
+ * Based on code in sungem_phy.c and gianfar_phy.c
+ *
+ * Author: Andy Fleming
+ *
+ * Copyright (c) 2004 Freescale Semiconductor, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ *
+ */
+#include <linux/config.h>
+#include <linux/kernel.h>
+#include <linux/sched.h>
+#include <linux/string.h>
+#include <linux/errno.h>
+#include <linux/unistd.h>
+#include <linux/slab.h>
+#include <linux/interrupt.h>
+#include <linux/init.h>
+#include <linux/delay.h>
+#include <linux/netdevice.h>
+#include <linux/etherdevice.h>
+#include <linux/skbuff.h>
+#include <linux/spinlock.h>
+#include <linux/mm.h>
+#include <linux/module.h>
+#include <linux/version.h>
+#include <linux/mii.h>
+#include <linux/ethtool.h>
+#include <linux/phy.h>
+
+#include <asm/io.h>
+#include <asm/irq.h>
+#include <asm/uaccess.h>
+
+/* Convenience function to print out the current phy status
+ */
+void phy_print_status(struct phy_device *phydev)
+{
+ pr_info("%s: Link is %s", phydev->dev.bus_id,
+ phydev->link ? "Up" : "Down");
+ if (phydev->link)
+ printk(" - %d/%s", phydev->speed,
+ DUPLEX_FULL == phydev->duplex ?
+ "Full" : "Half");
+
+ printk("\n");
+}
+EXPORT_SYMBOL(phy_print_status);
+
+
+/* Convenience functions for reading/writing a given PHY
+ * register. They MUST NOT be called from interrupt context,
+ * because the bus read/write functions may wait for an interrupt
+ * to conclude the operation. */
+int phy_read(struct phy_device *phydev, u16 regnum)
+{
+ int retval;
+ struct mii_bus *bus = phydev->bus;
+
+ spin_lock_bh(&bus->mdio_lock);
+ retval = bus->read(bus, phydev->addr, regnum);
+ spin_unlock_bh(&bus->mdio_lock);
+
+ return retval;
+}
+EXPORT_SYMBOL(phy_read);
+
+int phy_write(struct phy_device *phydev, u16 regnum, u16 val)
+{
+ int err;
+ struct mii_bus *bus = phydev->bus;
+
+ spin_lock_bh(&bus->mdio_lock);
+ err = bus->write(bus, phydev->addr, regnum, val);
+ spin_unlock_bh(&bus->mdio_lock);
+
+ return err;
+}
+EXPORT_SYMBOL(phy_write);
+
+
+int phy_clear_interrupt(struct phy_device *phydev)
+{
+ int err = 0;
+
+ if (phydev->drv->ack_interrupt)
+ err = phydev->drv->ack_interrupt(phydev);
+
+ return err;
+}
+
+
+int phy_config_interrupt(struct phy_device *phydev, u32 interrupts)
+{
+ int err = 0;
+
+ phydev->interrupts = interrupts;
+ if (phydev->drv->config_intr)
+ err = phydev->drv->config_intr(phydev);
+
+ return err;
+}
+
+
+/* phy_aneg_done
+ *
+ * description: Reads the status register and returns 0 either if
+ * auto-negotiation is incomplete, or if there was an error.
+ * Returns BMSR_ANEGCOMPLETE if auto-negotiation is done.
+ */
+static inline int phy_aneg_done(struct phy_device *phydev)
+{
+ int retval;
+
+ retval = phy_read(phydev, MII_BMSR);
+
+ return (retval < 0) ? retval : (retval & BMSR_ANEGCOMPLETE);
+}
+
+/* A structure for mapping a particular speed and duplex
+ * combination to a particular SUPPORTED and ADVERTISED value */
+struct phy_setting {
+ int speed;
+ int duplex;
+ u32 setting;
+};
+
+/* A mapping of all SUPPORTED settings to speed/duplex */
+static struct phy_setting settings[] = {
+ {
+ .speed = 10000,
+ .duplex = DUPLEX_FULL,
+ .setting = SUPPORTED_10000baseT_Full,
+ },
+ {
+ .speed = SPEED_1000,
+ .duplex = DUPLEX_FULL,
+ .setting = SUPPORTED_1000baseT_Full,
+ },
+ {
+ .speed = SPEED_1000,
+ .duplex = DUPLEX_HALF,
+ .setting = SUPPORTED_1000baseT_Half,
+ },
+ {
+ .speed = SPEED_100,
+ .duplex = DUPLEX_FULL,
+ .setting = SUPPORTED_100baseT_Full,
+ },
+ {
+ .speed = SPEED_100,
+ .duplex = DUPLEX_HALF,
+ .setting = SUPPORTED_100baseT_Half,
+ },
+ {
+ .speed = SPEED_10,
+ .duplex = DUPLEX_FULL,
+ .setting = SUPPORTED_10baseT_Full,
+ },
+ {
+ .speed = SPEED_10,
+ .duplex = DUPLEX_HALF,
+ .setting = SUPPORTED_10baseT_Half,
+ },
+};
+
+#define MAX_NUM_SETTINGS (sizeof(settings)/sizeof(struct phy_setting))
+
+/* phy_find_setting
+ *
+ * description: Searches the settings array for the setting which
+ * matches the desired speed and duplex, and returns the index
+ * of that setting. Returns the index of the last setting if
+ * none of the others match.
+ */
+static inline int phy_find_setting(int speed, int duplex)
+{
+ int idx = 0;
+
+ while (idx < ARRAY_SIZE(settings) &&
+ (settings[idx].speed != speed ||
+ settings[idx].duplex != duplex))
+ idx++;
+
+ return idx < MAX_NUM_SETTINGS ? idx : MAX_NUM_SETTINGS - 1;
+}
+
+/* phy_find_valid
+ * idx: The first index in settings[] to search
+ * features: A mask of the valid settings
+ *
+ * description: Returns the index of the first valid setting less
+ * than or equal to the one pointed to by idx, as determined by
+ * the mask in features. Returns the index of the last setting
+ * if nothing else matches.
+ */
+static inline int phy_find_valid(int idx, u32 features)
+{
+ while (idx < MAX_NUM_SETTINGS && !(settings[idx].setting & features))
+ idx++;
+
+ return idx < MAX_NUM_SETTINGS ? idx : MAX_NUM_SETTINGS - 1;
+}
+
+/* phy_sanitize_settings
+ *
+ * description: Make sure the PHY is set to supported speeds and
+ * duplexes. Drop down by one in this order: 1000/FULL,
+ * 1000/HALF, 100/FULL, 100/HALF, 10/FULL, 10/HALF
+ */
+void phy_sanitize_settings(struct phy_device *phydev)
+{
+ u32 features = phydev->supported;
+ int idx;
+
+ /* Sanitize settings based on PHY capabilities */
+ if ((features & SUPPORTED_Autoneg) == 0)
+ phydev->autoneg = 0;
+
+ idx = phy_find_valid(phy_find_setting(phydev->speed, phydev->duplex),
+ features);
+
+ phydev->speed = settings[idx].speed;
+ phydev->duplex = settings[idx].duplex;
+}
+EXPORT_SYMBOL(phy_sanitize_settings);
+
+/* phy_ethtool_sset:
+ * A generic ethtool sset function. Handles all the details
+ *
+ * A few notes about parameter checking:
+ * - We don't set port or transceiver, so we don't care what they
+ * were set to.
+ * - phy_start_aneg() will make sure forced settings are sane, and
+ * choose the next best ones from the ones selected, so we don't
+ * care if ethtool tries to give us bad values
+ *
+ * A note about the PHYCONTROL Layer. If you turn off
+ * CONFIG_PHYCONTROL, you will need to read the PHY status
+ * registers after this function completes, and update your
+ * controller manually.
+ */
+int phy_ethtool_sset(struct phy_device *phydev, struct ethtool_cmd *cmd)
+{
+ if (cmd->phy_address != phydev->addr)
+ return -EINVAL;
+
+ /* We make sure that we don't pass unsupported
+ * values in to the PHY */
+ cmd->advertising &= phydev->supported;
+
+ /* Verify the settings we care about. */
+ if (cmd->autoneg != AUTONEG_ENABLE && cmd->autoneg != AUTONEG_DISABLE)
+ return -EINVAL;
+
+ if (cmd->autoneg == AUTONEG_ENABLE && cmd->advertising == 0)
+ return -EINVAL;
+
+ if (cmd->autoneg == AUTONEG_DISABLE
+ && ((cmd->speed != SPEED_1000
+ && cmd->speed != SPEED_100
+ && cmd->speed != SPEED_10)
+ || (cmd->duplex != DUPLEX_HALF
+ && cmd->duplex != DUPLEX_FULL)))
+ return -EINVAL;
+
+ phydev->autoneg = cmd->autoneg;
+
+ phydev->speed = cmd->speed;
+
+ phydev->advertising = cmd->advertising;
+
+ if (AUTONEG_ENABLE == cmd->autoneg)
+ phydev->advertising |= ADVERTISED_Autoneg;
+ else
+ phydev->advertising &= ~ADVERTISED_Autoneg;
+
+ phydev->duplex = cmd->duplex;
+
+ /* Restart the PHY */
+ phy_start_aneg(phydev);
+
+ return 0;
+}
+
+int phy_ethtool_gset(struct phy_device *phydev, struct ethtool_cmd *cmd)
+{
+ cmd->supported = phydev->supported;
+
+ cmd->advertising = phydev->advertising;
+
+ cmd->speed = phydev->speed;
+ cmd->duplex = phydev->duplex;
+ cmd->port = PORT_MII;
+ cmd->phy_address = phydev->addr;
+ cmd->transceiver = XCVR_EXTERNAL;
+ cmd->autoneg = phydev->autoneg;
+
+ return 0;
+}
+
+
+/* Note that this function is currently incompatible with the
+ * PHYCONTROL layer. It changes registers without regard to
+ * current state. Use at own risk
+ */
+int phy_mii_ioctl(struct phy_device *phydev,
+ struct mii_ioctl_data *mii_data, int cmd)
+{
+ u16 val = mii_data->val_in;
+
+ switch (cmd) {
+ case SIOCGMIIPHY:
+ mii_data->phy_id = phydev->addr;
+ break;
+ case SIOCGMIIREG:
+ mii_data->val_out = phy_read(phydev, mii_data->reg_num);
+ break;
+
+ case SIOCSMIIREG:
+ if (!capable(CAP_NET_ADMIN))
+ return -EPERM;
+
+ if (mii_data->phy_id == phydev->addr) {
+ switch(mii_data->reg_num) {
+ case MII_BMCR:
+ if (val & (BMCR_RESET|BMCR_ANENABLE))
+ phydev->autoneg = AUTONEG_DISABLE;
+ else
+ phydev->autoneg = AUTONEG_ENABLE;
+ if ((!phydev->autoneg) && (val & BMCR_FULLDPLX))
+ phydev->duplex = DUPLEX_FULL;
+ else
+ phydev->duplex = DUPLEX_HALF;
+ break;
+ case MII_ADVERTISE:
+ phydev->advertising = val;
+ break;
+ default:
+ /* do nothing */
+ break;
+ }
+ }
+
+ phy_write(phydev, mii_data->reg_num, val);
+
+ if (mii_data->reg_num == MII_BMCR
+ && val & BMCR_RESET
+ && phydev->drv->config_init)
+ phydev->drv->config_init(phydev);
+ break;
+ }
+
+ return 0;
+}
+
+/* phy_start_aneg
+ *
+ * description: Sanitizes the settings (if we're not
+ * autonegotiating them), and then calls the driver's
+ * config_aneg function. If the PHYCONTROL Layer is operating,
+ * we change the state to reflect the beginning of
+ * Auto-negotiation or forcing.
+ */
+int phy_start_aneg(struct phy_device *phydev)
+{
+ int err;
+
+ spin_lock(&phydev->lock);
+
+ if (AUTONEG_DISABLE == phydev->autoneg)
+ phy_sanitize_settings(phydev);
+
+ err = phydev->drv->config_aneg(phydev);
+
+#ifdef CONFIG_PHYCONTROL
+ if (err < 0)
+ goto out_unlock;
+
+ if (phydev->state != PHY_HALTED) {
+ if (AUTONEG_ENABLE == phydev->autoneg) {
+ phydev->state = PHY_AN;
+ phydev->link_timeout = PHY_AN_TIMEOUT;
+ } else {
+ phydev->state = PHY_FORCING;
+ phydev->link_timeout = PHY_FORCE_TIMEOUT;
+ }
+ }
+
+out_unlock:
+#endif
+ spin_unlock(&phydev->lock);
+ return err;
+}
+EXPORT_SYMBOL(phy_start_aneg);
+
+
+#ifdef CONFIG_PHYCONTROL
+static void phy_change(void *data);
+static void phy_timer(unsigned long data);
+
+/* phy_start_machine:
+ *
+ * description: The PHY infrastructure can run a state machine
+ * which tracks whether the PHY is starting up, negotiating,
+ * etc. This function starts the timer which tracks the state
+ * of the PHY. If you want to be notified when the state
+ * changes, pass in the callback, otherwise, pass NULL. If you
+ * want to maintain your own state machine, do not call this
+ * function. */
+void phy_start_machine(struct phy_device *phydev,
+ void (*handler)(struct net_device *))
+{
+ phydev->adjust_state = handler;
+
+ init_timer(&phydev->phy_timer);
+ phydev->phy_timer.function = &phy_timer;
+ phydev->phy_timer.data = (unsigned long) phydev;
+ mod_timer(&phydev->phy_timer, jiffies + HZ);
+}
+
+/* phy_stop_machine
+ *
+ * description: Stops the state machine timer, sets the state to
+ * UP (unless it wasn't up yet), and then frees the interrupt,
+ * if it is in use. This function must be called BEFORE
+ * phy_detach.
+ */
+void phy_stop_machine(struct phy_device *phydev)
+{
+ del_timer_sync(&phydev->phy_timer);
+
+ spin_lock(&phydev->lock);
+ if (phydev->state > PHY_UP)
+ phydev->state = PHY_UP;
+ spin_unlock(&phydev->lock);
+
+ if (phydev->irq != PHY_POLL)
+ phy_stop_interrupts(phydev);
+
+ phydev->adjust_state = NULL;
+}
+
+/* phy_force_reduction
+ *
+ * description: Reduces the speed/duplex settings by
+ * one notch. The order is so:
+ * 1000/FULL, 1000/HALF, 100/FULL, 100/HALF,
+ * 10/FULL, 10/HALF. The function bottoms out at 10/HALF.
+ */
+static void phy_force_reduction(struct phy_device *phydev)
+{
+ int idx;
+
+ idx = phy_find_setting(phydev->speed, phydev->duplex);
+
+ idx++;
+
+ idx = phy_find_valid(idx, phydev->supported);
+
+ phydev->speed = settings[idx].speed;
+ phydev->duplex = settings[idx].duplex;
+
+ pr_info("Trying %d/%s\n", phydev->speed,
+ DUPLEX_FULL == phydev->duplex ?
+ "FULL" : "HALF");
+}
+
+
+/* phy_error:
+ *
+ * Moves the PHY to the HALTED state in response to a read
+ * or write error, and tells the controller the link is down.
+ * Must not be called from interrupt context, or while the
+ * phydev->lock is held.
+ */
+void phy_error(struct phy_device *phydev)
+{
+ spin_lock(&phydev->lock);
+ phydev->state = PHY_HALTED;
+ spin_unlock(&phydev->lock);
+}
+
+/* phy_interrupt
+ *
+ * description: When a PHY interrupt occurs, the handler disables
+ * interrupts, and schedules a work task to clear the interrupt.
+ */
+static irqreturn_t phy_interrupt(int irq, void *phy_dat, struct pt_regs *regs)
+{
+ struct phy_device *phydev = phy_dat;
+
+ /* The MDIO bus is not allowed to be written in interrupt
+ * context, so we need to disable the irq here. A work
+ * queue will write the PHY to disable and clear the
+ * interrupt, and then reenable the irq line. */
+ disable_irq_nosync(irq);
+
+ schedule_work(&phydev->phy_queue);
+
+ return IRQ_HANDLED;
+}
+
+/* Enable the interrupts from the PHY side */
+int phy_enable_interrupts(struct phy_device *phydev)
+{
+ int err;
+
+ err = phy_clear_interrupt(phydev);
+
+ if (err < 0)
+ return err;
+
+ err = phy_config_interrupt(phydev, PHY_INTERRUPT_ENABLED);
+
+ return err;
+}
+EXPORT_SYMBOL(phy_enable_interrupts);
+
+/* Disable the PHY interrupts from the PHY side */
+int phy_disable_interrupts(struct phy_device *phydev)
+{
+ int err;
+
+ /* Disable PHY interrupts */
+ err = phy_config_interrupt(phydev, PHY_INTERRUPT_DISABLED);
+
+ if (err)
+ goto phy_err;
+
+ /* Clear the interrupt */
+ err = phy_clear_interrupt(phydev);
+
+ if (err)
+ goto phy_err;
+
+ return 0;
+
+phy_err:
+ phy_error(phydev);
+
+ return err;
+}
+EXPORT_SYMBOL(phy_disable_interrupts);
+
+/* phy_start_interrupts
+ *
+ * description: Request the interrupt for the given PHY. If
+ * this fails, then we set irq to PHY_POLL.
+ * Otherwise, we enable the interrupts in the PHY.
+ * Returns 0 on success.
+ * This should only be called with a valid IRQ number.
+ */
+int phy_start_interrupts(struct phy_device *phydev)
+{
+ int err = 0;
+
+ INIT_WORK(&phydev->phy_queue, phy_change, phydev);
+
+ if (request_irq(phydev->irq, phy_interrupt,
+ SA_SHIRQ,
+ "phy_interrupt",
+ phydev) < 0) {
+ printk(KERN_WARNING "%s: Can't get IRQ %d (PHY)\n",
+ phydev->bus->name,
+ phydev->irq);
+ phydev->irq = PHY_POLL;
+ return 0;
+ }
+
+ err = phy_enable_interrupts(phydev);
+
+ return err;
+}
+EXPORT_SYMBOL(phy_start_interrupts);
+
+int phy_stop_interrupts(struct phy_device *phydev)
+{
+ int err;
+
+ err = phy_disable_interrupts(phydev);
+
+ if (err)
+ phy_error(phydev);
+
+ free_irq(phydev->irq, phydev);
+
+ return err;
+}
+EXPORT_SYMBOL(phy_stop_interrupts);
+
+
+/* Scheduled by the phy_interrupt/timer to handle PHY changes */
+static void phy_change(void *data)
+{
+ int err;
+ struct phy_device *phydev = data;
+
+ err = phy_disable_interrupts(phydev);
+
+ if (err)
+ goto phy_err;
+
+ spin_lock(&phydev->lock);
+ if ((PHY_RUNNING == phydev->state) || (PHY_NOLINK == phydev->state))
+ phydev->state = PHY_CHANGELINK;
+ spin_unlock(&phydev->lock);
+
+ enable_irq(phydev->irq);
+
+ /* Reenable interrupts */
+ err = phy_config_interrupt(phydev, PHY_INTERRUPT_ENABLED);
+
+ if (err)
+ goto irq_enable_err;
+
+ return;
+
+irq_enable_err:
+ disable_irq(phydev->irq);
+phy_err:
+ phy_error(phydev);
+}
+
+/* Bring down the PHY link, and stop checking the status. */
+void phy_stop(struct phy_device *phydev)
+{
+ spin_lock(&phydev->lock);
+
+ if (PHY_HALTED == phydev->state)
+ goto out_unlock;
+
+ if (phydev->irq != PHY_POLL) {
+ /* Clear any pending interrupts */
+ phy_clear_interrupt(phydev);
+
+ /* Disable PHY Interrupts */
+ phy_config_interrupt(phydev, PHY_INTERRUPT_DISABLED);
+ }
+
+ phydev->state = PHY_HALTED;
+
+out_unlock:
+ spin_unlock(&phydev->lock);
+}
+
+
+/* phy_start
+ *
+ * description: Indicates the attached device's readiness to
+ * handle PHY-related work. Used during startup to start the
+ * PHY, and after a call to phy_stop() to resume operation.
+ * Also used to indicate the MDIO bus has cleared an error
+ * condition.
+ */
+void phy_start(struct phy_device *phydev)
+{
+ spin_lock(&phydev->lock);
+
+ switch (phydev->state) {
+ case PHY_STARTING:
+ phydev->state = PHY_PENDING;
+ break;
+ case PHY_READY:
+ phydev->state = PHY_UP;
+ break;
+ case PHY_HALTED:
+ phydev->state = PHY_RESUMING;
+ default:
+ break;
+ }
+ spin_unlock(&phydev->lock);
+}
+EXPORT_SYMBOL(phy_stop);
+EXPORT_SYMBOL(phy_start);
+
+/* PHY timer which handles the state machine */
+static void phy_timer(unsigned long data)
+{
+ struct phy_device *phydev = (struct phy_device *)data;
+ int needs_aneg = 0;
+ int err = 0;
+
+ spin_lock(&phydev->lock);
+
+ if (phydev->adjust_state)
+ phydev->adjust_state(phydev->attached_dev);
+
+ switch(phydev->state) {
+ case PHY_DOWN:
+ case PHY_STARTING:
+ case PHY_READY:
+ case PHY_PENDING:
+ break;
+ case PHY_UP:
+ needs_aneg = 1;
+
+ phydev->link_timeout = PHY_AN_TIMEOUT;
+
+ break;
+ case PHY_AN:
+ /* Check if negotiation is done. Break
+ * if there's an error */
+ err = phy_aneg_done(phydev);
+ if (err < 0)
+ break;
+
+ /* If auto-negotiation is done, we change to
+ * either RUNNING, or NOLINK */
+ if (err > 0) {
+ err = phy_read_status(phydev);
+
+ if (err)
+ break;
+
+ if (phydev->link) {
+ phydev->state = PHY_RUNNING;
+ netif_carrier_on(phydev->attached_dev);
+ } else {
+ phydev->state = PHY_NOLINK;
+ netif_carrier_off(phydev->attached_dev);
+ }
+
+ phydev->adjust_link(phydev->attached_dev);
+
+ } else if (0 == phydev->link_timeout--) {
+ /* The counter expired, so either we
+ * switch to forced mode, or the
+ * magic_aneg bit exists, and we try aneg
+ * again */
+ if (!(phydev->drv->flags & PHY_HAS_MAGICANEG)) {
+ int idx;
+
+ /* We'll start from the
+ * fastest speed, and work
+ * our way down */
+ idx = phy_find_valid(0,
+ phydev->supported);
+
+ phydev->speed = settings[idx].speed;
+ phydev->duplex = settings[idx].duplex;
+
+ phydev->autoneg = AUTONEG_DISABLE;
+ phydev->state = PHY_FORCING;
+ phydev->link_timeout =
+ PHY_FORCE_TIMEOUT;
+
+ pr_info("Trying %d/%s\n",
+ phydev->speed,
+ DUPLEX_FULL ==
+ phydev->duplex ?
+ "FULL" : "HALF");
+ }
+
+ needs_aneg = 1;
+ }
+ break;
+ case PHY_NOLINK:
+ err = phy_read_status(phydev);
+
+ if (err)
+ break;
+
+ if (phydev->link) {
+ phydev->state = PHY_RUNNING;
+ netif_carrier_on(phydev->attached_dev);
+ phydev->adjust_link(phydev->attached_dev);
+ }
+ break;
+ case PHY_FORCING:
+ err = phy_read_status(phydev);
+
+ if (err)
+ break;
+
+ if (phydev->link) {
+ phydev->state = PHY_RUNNING;
+ netif_carrier_on(phydev->attached_dev);
+ } else {
+ if (0 == phydev->link_timeout--) {
+ phy_force_reduction(phydev);
+ needs_aneg = 1;
+ }
+ }
+
+ phydev->adjust_link(phydev->attached_dev);
+ break;
+ case PHY_RUNNING:
+ /* Only register a CHANGE if we are
+ * polling */
+ if (PHY_POLL == phydev->irq)
+ phydev->state = PHY_CHANGELINK;
+ break;
+ case PHY_CHANGELINK:
+ err = phy_read_status(phydev);
+
+ if (err)
+ break;
+
+ if (phydev->link) {
+ phydev->state = PHY_RUNNING;
+ netif_carrier_on(phydev->attached_dev);
+ } else {
+ phydev->state = PHY_NOLINK;
+ netif_carrier_off(phydev->attached_dev);
+ }
+
+ phydev->adjust_link(phydev->attached_dev);
+
+ if (PHY_POLL != phydev->irq)
+ err = phy_config_interrupt(phydev,
+ PHY_INTERRUPT_ENABLED);
+ break;
+ case PHY_HALTED:
+ if (phydev->link) {
+ phydev->link = 0;
+ netif_carrier_off(phydev->attached_dev);
+ phydev->adjust_link(phydev->attached_dev);
+ }
+ break;
+ case PHY_RESUMING:
+
+ err = phy_clear_interrupt(phydev);
+
+ if (err)
+ break;
+
+ err = phy_config_interrupt(phydev,
+ PHY_INTERRUPT_ENABLED);
+
+ if (err)
+ break;
+
+ if (AUTONEG_ENABLE == phydev->autoneg) {
+ err = phy_aneg_done(phydev);
+ if (err < 0)
+ break;
+
+ /* err > 0 if AN is done.
+ * Otherwise, it's 0, and we're
+ * still waiting for AN */
+ if (err > 0) {
+ phydev->state = PHY_RUNNING;
+ } else {
+ phydev->state = PHY_AN;
+ phydev->link_timeout = PHY_AN_TIMEOUT;
+ }
+ } else
+ phydev->state = PHY_RUNNING;
+ break;
+ }
+
+ spin_unlock(&phydev->lock);
+
+ if (needs_aneg)
+ err = phy_start_aneg(phydev);
+
+ if (err < 0)
+ phy_error(phydev);
+
+ mod_timer(&phydev->phy_timer, jiffies + PHY_STATE_TIME * HZ);
+}
+
+#endif /* CONFIG_PHYCONTROL */
diff --git a/drivers/net/phy/phy_device.c b/drivers/net/phy/phy_device.c
new file mode 100644
index 00000000000..33f7bdb5857
--- /dev/null
+++ b/drivers/net/phy/phy_device.c
@@ -0,0 +1,696 @@
+/*
+ * drivers/net/phy/phy_device.c
+ *
+ * Framework for finding and configuring PHYs.
+ * Also contains generic PHY driver
+ *
+ * Author: Andy Fleming
+ *
+ * Copyright (c) 2004 Freescale Semiconductor, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ *
+ */
+#include <linux/config.h>
+#include <linux/kernel.h>
+#include <linux/sched.h>
+#include <linux/string.h>
+#include <linux/errno.h>
+#include <linux/unistd.h>
+#include <linux/slab.h>
+#include <linux/interrupt.h>
+#include <linux/init.h>
+#include <linux/delay.h>
+#include <linux/netdevice.h>
+#include <linux/etherdevice.h>
+#include <linux/skbuff.h>
+#include <linux/spinlock.h>
+#include <linux/mm.h>
+#include <linux/module.h>
+#include <linux/version.h>
+#include <linux/mii.h>
+#include <linux/ethtool.h>
+#include <linux/phy.h>
+
+#include <asm/io.h>
+#include <asm/irq.h>
+#include <asm/uaccess.h>
+
+static struct phy_driver genphy_driver;
+extern int mdio_bus_init(void);
+extern void mdio_bus_exit(void);
+
+/* get_phy_device
+ *
+ * description: Reads the ID registers of the PHY at addr on the
+ * bus, then allocates and returns the phy_device to
+ * represent it.
+ */
+struct phy_device * get_phy_device(struct mii_bus *bus, int addr)
+{
+ int phy_reg;
+ u32 phy_id;
+ struct phy_device *dev = NULL;
+
+ /* Grab the bits from PHYIR1, and put them
+ * in the upper half */
+ phy_reg = bus->read(bus, addr, MII_PHYSID1);
+
+ if (phy_reg < 0)
+ return ERR_PTR(phy_reg);
+
+ phy_id = (phy_reg & 0xffff) << 16;
+
+ /* Grab the bits from PHYIR2, and put them in the lower half */
+ phy_reg = bus->read(bus, addr, MII_PHYSID2);
+
+ if (phy_reg < 0)
+ return ERR_PTR(phy_reg);
+
+ phy_id |= (phy_reg & 0xffff);
+
+ /* If the phy_id is all Fs, there is no device there */
+ if (0xffffffff == phy_id)
+ return NULL;
+
+ /* Otherwise, we allocate the device, and initialize the
+ * default values */
+ dev = kcalloc(1, sizeof(*dev), GFP_KERNEL);
+
+ if (NULL == dev)
+ return ERR_PTR(-ENOMEM);
+
+ dev->speed = 0;
+ dev->duplex = -1;
+ dev->pause = dev->asym_pause = 0;
+ dev->link = 1;
+
+ dev->autoneg = AUTONEG_ENABLE;
+
+ dev->addr = addr;
+ dev->phy_id = phy_id;
+ dev->bus = bus;
+
+ dev->state = PHY_DOWN;
+
+ spin_lock_init(&dev->lock);
+
+ return dev;
+}
+
+#ifdef CONFIG_PHYCONTROL
+/* phy_prepare_link:
+ *
+ * description: Tells the PHY infrastructure to handle the
+ * gory details on monitoring link status (whether through
+ * polling or an interrupt), and to call back to the
+ * connected device driver when the link status changes.
+ * If you want to monitor your own link state, don't call
+ * this function */
+void phy_prepare_link(struct phy_device *phydev,
+ void (*handler)(struct net_device *))
+{
+ phydev->adjust_link = handler;
+}
+
+/* phy_connect:
+ *
+ * description: Convenience function for connecting ethernet
+ * devices to PHY devices. The default behavior is for
+ * the PHY infrastructure to handle everything, and only notify
+ * the connected driver when the link status changes. If you
+ * don't want, or can't use the provided functionality, you may
+ * choose to call only the subset of functions which provide
+ * the desired functionality.
+ */
+struct phy_device * phy_connect(struct net_device *dev, const char *phy_id,
+ void (*handler)(struct net_device *), u32 flags)
+{
+ struct phy_device *phydev;
+
+ phydev = phy_attach(dev, phy_id, flags);
+
+ if (IS_ERR(phydev))
+ return phydev;
+
+ phy_prepare_link(phydev, handler);
+
+ phy_start_machine(phydev, NULL);
+
+ if (phydev->irq > 0)
+ phy_start_interrupts(phydev);
+
+ return phydev;
+}
+EXPORT_SYMBOL(phy_connect);
+
+void phy_disconnect(struct phy_device *phydev)
+{
+ if (phydev->irq > 0)
+ phy_stop_interrupts(phydev);
+
+ phy_stop_machine(phydev);
+
+ phydev->adjust_link = NULL;
+
+ phy_detach(phydev);
+}
+EXPORT_SYMBOL(phy_disconnect);
+
+#endif /* CONFIG_PHYCONTROL */
+
+/* phy_attach:
+ *
+ * description: Called by drivers to attach to a particular PHY
+ * device. The phy_device is found, and properly hooked up
+ * to the phy_driver. If no driver is attached, then the
+ * genphy_driver is used. The phy_device is given a ptr to
+ * the attaching device, and given a callback for link status
+ * change. The phy_device is returned to the attaching
+ * driver.
+ */
+static int phy_compare_id(struct device *dev, void *data)
+{
+ return strcmp((char *)data, dev->bus_id) ? 0 : 1;
+}
+
+struct phy_device *phy_attach(struct net_device *dev,
+ const char *phy_id, u32 flags)
+{
+ struct bus_type *bus = &mdio_bus_type;
+ struct phy_device *phydev;
+ struct device *d;
+
+ /* Search the list of PHY devices on the mdio bus for the
+ * PHY with the requested name */
+ d = bus_find_device(bus, NULL, (void *)phy_id, phy_compare_id);
+
+ if (d) {
+ phydev = to_phy_device(d);
+ } else {
+ printk(KERN_ERR "%s not found\n", phy_id);
+ return ERR_PTR(-ENODEV);
+ }
+
+ /* Assume that if there is no driver, that it doesn't
+ * exist, and we should use the genphy driver. */
+ if (NULL == d->driver) {
+ int err;
+ down_write(&d->bus->subsys.rwsem);
+ d->driver = &genphy_driver.driver;
+
+ err = d->driver->probe(d);
+
+ if (err < 0)
+ return ERR_PTR(err);
+
+ device_bind_driver(d);
+ up_write(&d->bus->subsys.rwsem);
+ }
+
+ if (phydev->attached_dev) {
+ printk(KERN_ERR "%s: %s already attached\n",
+ dev->name, phy_id);
+ return ERR_PTR(-EBUSY);
+ }
+
+ phydev->attached_dev = dev;
+
+ phydev->dev_flags = flags;
+
+ return phydev;
+}
+EXPORT_SYMBOL(phy_attach);
+
+void phy_detach(struct phy_device *phydev)
+{
+ phydev->attached_dev = NULL;
+
+ /* If the device had no specific driver before (i.e. - it
+ * was using the generic driver), we unbind the device
+ * from the generic driver so that there's a chance a
+ * real driver could be loaded */
+ if (phydev->dev.driver == &genphy_driver.driver) {
+ down_write(&phydev->dev.bus->subsys.rwsem);
+ device_release_driver(&phydev->dev);
+ up_write(&phydev->dev.bus->subsys.rwsem);
+ }
+}
+EXPORT_SYMBOL(phy_detach);
+
+
+/* Generic PHY support and helper functions */
+
+/* genphy_config_advert
+ *
+ * description: Writes MII_ADVERTISE with the appropriate values,
+ * after sanitizing the values to make sure we only advertise
+ * what is supported
+ */
+int genphy_config_advert(struct phy_device *phydev)
+{
+ u32 advertise;
+ int adv;
+ int err;
+
+ /* Only allow advertising what
+ * this PHY supports */
+ phydev->advertising &= phydev->supported;
+ advertise = phydev->advertising;
+
+ /* Setup standard advertisement */
+ adv = phy_read(phydev, MII_ADVERTISE);
+
+ if (adv < 0)
+ return adv;
+
+ adv &= ~(ADVERTISE_ALL | ADVERTISE_100BASE4 | ADVERTISE_PAUSE_CAP |
+ ADVERTISE_PAUSE_ASYM);
+ if (advertise & ADVERTISED_10baseT_Half)
+ adv |= ADVERTISE_10HALF;
+ if (advertise & ADVERTISED_10baseT_Full)
+ adv |= ADVERTISE_10FULL;
+ if (advertise & ADVERTISED_100baseT_Half)
+ adv |= ADVERTISE_100HALF;
+ if (advertise & ADVERTISED_100baseT_Full)
+ adv |= ADVERTISE_100FULL;
+ if (advertise & ADVERTISED_Pause)
+ adv |= ADVERTISE_PAUSE_CAP;
+ if (advertise & ADVERTISED_Asym_Pause)
+ adv |= ADVERTISE_PAUSE_ASYM;
+
+ err = phy_write(phydev, MII_ADVERTISE, adv);
+
+ if (err < 0)
+ return err;
+
+ /* Configure gigabit if it's supported */
+ if (phydev->supported & (SUPPORTED_1000baseT_Half |
+ SUPPORTED_1000baseT_Full)) {
+ adv = phy_read(phydev, MII_CTRL1000);
+
+ if (adv < 0)
+ return adv;
+
+ adv &= ~(ADVERTISE_1000FULL | ADVERTISE_1000HALF);
+ if (advertise & SUPPORTED_1000baseT_Half)
+ adv |= ADVERTISE_1000HALF;
+ if (advertise & SUPPORTED_1000baseT_Full)
+ adv |= ADVERTISE_1000FULL;
+ err = phy_write(phydev, MII_CTRL1000, adv);
+
+ if (err < 0)
+ return err;
+ }
+
+ return adv;
+}
+EXPORT_SYMBOL(genphy_config_advert);
+
+/* genphy_setup_forced
+ *
+ * description: Configures MII_BMCR to force speed/duplex
+ * to the values in phydev. Assumes that the values are valid.
+ * Please see phy_sanitize_settings() */
+int genphy_setup_forced(struct phy_device *phydev)
+{
+ int ctl = BMCR_RESET;
+
+ phydev->pause = phydev->asym_pause = 0;
+
+ if (SPEED_1000 == phydev->speed)
+ ctl |= BMCR_SPEED1000;
+ else if (SPEED_100 == phydev->speed)
+ ctl |= BMCR_SPEED100;
+
+ if (DUPLEX_FULL == phydev->duplex)
+ ctl |= BMCR_FULLDPLX;
+
+ ctl = phy_write(phydev, MII_BMCR, ctl);
+
+ if (ctl < 0)
+ return ctl;
+
+ /* We just reset the device, so we'd better configure any
+ * settings the PHY requires to operate */
+ if (phydev->drv->config_init)
+ ctl = phydev->drv->config_init(phydev);
+
+ return ctl;
+}
+
+
+/* Enable and Restart Autonegotiation */
+int genphy_restart_aneg(struct phy_device *phydev)
+{
+ int ctl;
+
+ ctl = phy_read(phydev, MII_BMCR);
+
+ if (ctl < 0)
+ return ctl;
+
+ ctl |= (BMCR_ANENABLE | BMCR_ANRESTART);
+
+ /* Don't isolate the PHY if we're negotiating */
+ ctl &= ~(BMCR_ISOLATE);
+
+ ctl = phy_write(phydev, MII_BMCR, ctl);
+
+ return ctl;
+}
+
+
+/* genphy_config_aneg
+ *
+ * description: If auto-negotiation is enabled, we configure the
+ * advertising, and then restart auto-negotiation. If it is not
+ * enabled, then we write the BMCR
+ */
+int genphy_config_aneg(struct phy_device *phydev)
+{
+ int err = 0;
+
+ if (AUTONEG_ENABLE == phydev->autoneg) {
+ err = genphy_config_advert(phydev);
+
+ if (err < 0)
+ return err;
+
+ err = genphy_restart_aneg(phydev);
+ } else
+ err = genphy_setup_forced(phydev);
+
+ return err;
+}
+EXPORT_SYMBOL(genphy_config_aneg);
+
+/* genphy_update_link
+ *
+ * description: Update the value in phydev->link to reflect the
+ * current link value. In order to do this, we need to read
+ * the status register twice, keeping the second value
+ */
+int genphy_update_link(struct phy_device *phydev)
+{
+ int status;
+
+ /* Do a fake read */
+ status = phy_read(phydev, MII_BMSR);
+
+ if (status < 0)
+ return status;
+
+ /* Read link and autonegotiation status */
+ status = phy_read(phydev, MII_BMSR);
+
+ if (status < 0)
+ return status;
+
+ if ((status & BMSR_LSTATUS) == 0)
+ phydev->link = 0;
+ else
+ phydev->link = 1;
+
+ return 0;
+}
+
+/* genphy_read_status
+ *
+ * description: Check the link, then figure out the current state
+ * by comparing what we advertise with what the link partner
+ * advertises. Start by checking the gigabit possibilities,
+ * then move on to 10/100.
+ */
+int genphy_read_status(struct phy_device *phydev)
+{
+ int adv;
+ int err;
+ int lpa;
+ int lpagb = 0;
+
+ /* Update the link, but return if there
+ * was an error */
+ err = genphy_update_link(phydev);
+ if (err)
+ return err;
+
+ if (AUTONEG_ENABLE == phydev->autoneg) {
+ if (phydev->supported & (SUPPORTED_1000baseT_Half
+ | SUPPORTED_1000baseT_Full)) {
+ lpagb = phy_read(phydev, MII_STAT1000);
+
+ if (lpagb < 0)
+ return lpagb;
+
+ adv = phy_read(phydev, MII_CTRL1000);
+
+ if (adv < 0)
+ return adv;
+
+ lpagb &= adv << 2;
+ }
+
+ lpa = phy_read(phydev, MII_LPA);
+
+ if (lpa < 0)
+ return lpa;
+
+ adv = phy_read(phydev, MII_ADVERTISE);
+
+ if (adv < 0)
+ return adv;
+
+ lpa &= adv;
+
+ phydev->speed = SPEED_10;
+ phydev->duplex = DUPLEX_HALF;
+ phydev->pause = phydev->asym_pause = 0;
+
+ if (lpagb & (LPA_1000FULL | LPA_1000HALF)) {
+ phydev->speed = SPEED_1000;
+
+ if (lpagb & LPA_1000FULL)
+ phydev->duplex = DUPLEX_FULL;
+ } else if (lpa & (LPA_100FULL | LPA_100HALF)) {
+ phydev->speed = SPEED_100;
+
+ if (lpa & LPA_100FULL)
+ phydev->duplex = DUPLEX_FULL;
+ } else
+ if (lpa & LPA_10FULL)
+ phydev->duplex = DUPLEX_FULL;
+
+ if (phydev->duplex == DUPLEX_FULL){
+ phydev->pause = lpa & LPA_PAUSE_CAP ? 1 : 0;
+ phydev->asym_pause = lpa & LPA_PAUSE_ASYM ? 1 : 0;
+ }
+ } else {
+ int bmcr = phy_read(phydev, MII_BMCR);
+ if (bmcr < 0)
+ return bmcr;
+
+ if (bmcr & BMCR_FULLDPLX)
+ phydev->duplex = DUPLEX_FULL;
+ else
+ phydev->duplex = DUPLEX_HALF;
+
+ if (bmcr & BMCR_SPEED1000)
+ phydev->speed = SPEED_1000;
+ else if (bmcr & BMCR_SPEED100)
+ phydev->speed = SPEED_100;
+ else
+ phydev->speed = SPEED_10;
+
+ phydev->pause = phydev->asym_pause = 0;
+ }
+
+ return 0;
+}
+EXPORT_SYMBOL(genphy_read_status);
+
+static int genphy_config_init(struct phy_device *phydev)
+{
+ u32 val;
+ u32 features;
+
+ /* For now, I'll claim that the generic driver supports
+ * all possible port types */
+ features = (SUPPORTED_TP | SUPPORTED_MII
+ | SUPPORTED_AUI | SUPPORTED_FIBRE |
+ SUPPORTED_BNC);
+
+ /* Do we support autonegotiation? */
+ val = phy_read(phydev, MII_BMSR);
+
+ if (val < 0)
+ return val;
+
+ if (val & BMSR_ANEGCAPABLE)
+ features |= SUPPORTED_Autoneg;
+
+ if (val & BMSR_100FULL)
+ features |= SUPPORTED_100baseT_Full;
+ if (val & BMSR_100HALF)
+ features |= SUPPORTED_100baseT_Half;
+ if (val & BMSR_10FULL)
+ features |= SUPPORTED_10baseT_Full;
+ if (val & BMSR_10HALF)
+ features |= SUPPORTED_10baseT_Half;
+
+ if (val & BMSR_ESTATEN) {
+ val = phy_read(phydev, MII_ESTATUS);
+
+ if (val < 0)
+ return val;
+
+ if (val & ESTATUS_1000_TFULL)
+ features |= SUPPORTED_1000baseT_Full;
+ if (val & ESTATUS_1000_THALF)
+ features |= SUPPORTED_1000baseT_Half;
+ }
+
+ phydev->supported = features;
+ phydev->advertising = features;
+
+ return 0;
+}
+
+
+/* phy_probe
+ *
+ * description: Take care of setting up the phy_device structure,
+ * set the state to READY (the driver's init function should
+ * set it to STARTING if needed).
+ */
+static int phy_probe(struct device *dev)
+{
+ struct phy_device *phydev;
+ struct phy_driver *phydrv;
+ struct device_driver *drv;
+ int err = 0;
+
+ phydev = to_phy_device(dev);
+
+ /* Make sure the driver is held.
+ * XXX -- Is this correct? */
+ drv = get_driver(phydev->dev.driver);
+ phydrv = to_phy_driver(drv);
+ phydev->drv = phydrv;
+
+ /* Disable the interrupt if the PHY doesn't support it */
+ if (!(phydrv->flags & PHY_HAS_INTERRUPT))
+ phydev->irq = PHY_POLL;
+
+ spin_lock(&phydev->lock);
+
+ /* Start out supporting everything. Eventually,
+ * a controller will attach, and may modify one
+ * or both of these values */
+ phydev->supported = phydrv->features;
+ phydev->advertising = phydrv->features;
+
+ /* Set the state to READY by default */
+ phydev->state = PHY_READY;
+
+ if (phydev->drv->probe)
+ err = phydev->drv->probe(phydev);
+
+ spin_unlock(&phydev->lock);
+
+ if (err < 0)
+ return err;
+
+ if (phydev->drv->config_init)
+ err = phydev->drv->config_init(phydev);
+
+ return err;
+}
+
+static int phy_remove(struct device *dev)
+{
+ struct phy_device *phydev;
+
+ phydev = to_phy_device(dev);
+
+ spin_lock(&phydev->lock);
+ phydev->state = PHY_DOWN;
+ spin_unlock(&phydev->lock);
+
+ if (phydev->drv->remove)
+ phydev->drv->remove(phydev);
+
+ put_driver(dev->driver);
+ phydev->drv = NULL;
+
+ return 0;
+}
+
+int phy_driver_register(struct phy_driver *new_driver)
+{
+ int retval;
+
+ memset(&new_driver->driver, 0, sizeof(new_driver->driver));
+ new_driver->driver.name = new_driver->name;
+ new_driver->driver.bus = &mdio_bus_type;
+ new_driver->driver.probe = phy_probe;
+ new_driver->driver.remove = phy_remove;
+
+ retval = driver_register(&new_driver->driver);
+
+ if (retval) {
+ printk(KERN_ERR "%s: Error %d in registering driver\n",
+ new_driver->name, retval);
+
+ return retval;
+ }
+
+ pr_info("%s: Registered new driver\n", new_driver->name);
+
+ return 0;
+}
+EXPORT_SYMBOL(phy_driver_register);
+
+void phy_driver_unregister(struct phy_driver *drv)
+{
+ driver_unregister(&drv->driver);
+}
+EXPORT_SYMBOL(phy_driver_unregister);
+
+static struct phy_driver genphy_driver = {
+ .phy_id = 0xffffffff,
+ .phy_id_mask = 0xffffffff,
+ .name = "Generic PHY",
+ .config_init = genphy_config_init,
+ .features = 0,
+ .config_aneg = genphy_config_aneg,
+ .read_status = genphy_read_status,
+ .driver = {.owner= THIS_MODULE, },
+};
+
+static int __init phy_init(void)
+{
+ int rc;
+
+ rc = mdio_bus_init();
+ if (rc)
+ return rc;
+
+ rc = phy_driver_register(&genphy_driver);
+ if (rc)
+ mdio_bus_exit();
+
+ return rc;
+}
+
+static void __exit phy_exit(void)
+{
+ phy_driver_unregister(&genphy_driver);
+ mdio_bus_exit();
+}
+
+subsys_initcall(phy_init);
+module_exit(phy_exit);
diff --git a/drivers/net/phy/qsemi.c b/drivers/net/phy/qsemi.c
new file mode 100644
index 00000000000..d461ba45763
--- /dev/null
+++ b/drivers/net/phy/qsemi.c
@@ -0,0 +1,143 @@
+/*
+ * drivers/net/phy/qsemi.c
+ *
+ * Driver for Quality Semiconductor PHYs
+ *
+ * Author: Andy Fleming
+ *
+ * Copyright (c) 2004 Freescale Semiconductor, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ *
+ */
+#include <linux/config.h>
+#include <linux/kernel.h>
+#include <linux/sched.h>
+#include <linux/string.h>
+#include <linux/errno.h>
+#include <linux/unistd.h>
+#include <linux/slab.h>
+#include <linux/interrupt.h>
+#include <linux/init.h>
+#include <linux/delay.h>
+#include <linux/netdevice.h>
+#include <linux/etherdevice.h>
+#include <linux/skbuff.h>
+#include <linux/spinlock.h>
+#include <linux/mm.h>
+#include <linux/module.h>
+#include <linux/version.h>
+#include <linux/mii.h>
+#include <linux/ethtool.h>
+#include <linux/phy.h>
+
+#include <asm/io.h>
+#include <asm/irq.h>
+#include <asm/uaccess.h>
+
+/* ------------------------------------------------------------------------- */
+/* The Quality Semiconductor QS6612 is used on the RPX CLLF */
+
+/* register definitions */
+
+#define MII_QS6612_MCR 17 /* Mode Control Register */
+#define MII_QS6612_FTR 27 /* Factory Test Register */
+#define MII_QS6612_MCO 28 /* Misc. Control Register */
+#define MII_QS6612_ISR 29 /* Interrupt Source Register */
+#define MII_QS6612_IMR 30 /* Interrupt Mask Register */
+#define MII_QS6612_IMR_INIT 0x003a
+#define MII_QS6612_PCR 31 /* 100BaseTx PHY Control Reg. */
+
+#define QS6612_PCR_AN_COMPLETE 0x1000
+#define QS6612_PCR_RLBEN 0x0200
+#define QS6612_PCR_DCREN 0x0100
+#define QS6612_PCR_4B5BEN 0x0040
+#define QS6612_PCR_TX_ISOLATE 0x0020
+#define QS6612_PCR_MLT3_DIS 0x0002
+#define QS6612_PCR_SCRM_DESCRM 0x0001
+
+MODULE_DESCRIPTION("Quality Semiconductor PHY driver");
+MODULE_AUTHOR("Andy Fleming");
+MODULE_LICENSE("GPL");
+
+/* Returns 0, unless there's a write error */
+static int qs6612_config_init(struct phy_device *phydev)
+{
+ /* The PHY powers up isolated on the RPX,
+ * so send a command to allow operation.
+ * XXX - My docs indicate this should be 0x0940
+ * ...or something. The current value sets three
+ * reserved bits, bit 11, which specifies it should be
+ * set to one, bit 10, which specifies it should be set
+ * to 0, and bit 7, which doesn't specify. However, my
+ * docs are preliminary, and I will leave it like this
+ * until someone more knowledgable corrects me or it.
+ * -- Andy Fleming
+ */
+ return phy_write(phydev, MII_QS6612_PCR, 0x0dc0);
+}
+
+static int qs6612_ack_interrupt(struct phy_device *phydev)
+{
+ int err;
+
+ err = phy_read(phydev, MII_QS6612_ISR);
+
+ if (err < 0)
+ return err;
+
+ err = phy_read(phydev, MII_BMSR);
+
+ if (err < 0)
+ return err;
+
+ err = phy_read(phydev, MII_EXPANSION);
+
+ if (err < 0)
+ return err;
+
+ return 0;
+}
+
+static int qs6612_config_intr(struct phy_device *phydev)
+{
+ int err;
+ if (phydev->interrupts == PHY_INTERRUPT_ENABLED)
+ err = phy_write(phydev, MII_QS6612_IMR,
+ MII_QS6612_IMR_INIT);
+ else
+ err = phy_write(phydev, MII_QS6612_IMR, 0);
+
+ return err;
+
+}
+
+static struct phy_driver qs6612_driver = {
+ .phy_id = 0x00181440,
+ .name = "QS6612",
+ .phy_id_mask = 0xfffffff0,
+ .features = PHY_BASIC_FEATURES,
+ .flags = PHY_HAS_INTERRUPT,
+ .config_init = qs6612_config_init,
+ .config_aneg = genphy_config_aneg,
+ .read_status = genphy_read_status,
+ .ack_interrupt = qs6612_ack_interrupt,
+ .config_intr = qs6612_config_intr,
+ .driver = { .owner = THIS_MODULE,},
+};
+
+static int __init qs6612_init(void)
+{
+ return phy_driver_register(&qs6612_driver);
+}
+
+static void __exit qs6612_exit(void)
+{
+ phy_driver_unregister(&qs6612_driver);
+}
+
+module_init(qs6612_init);
+module_exit(qs6612_exit);
diff --git a/drivers/net/ppp_generic.c b/drivers/net/ppp_generic.c
index a32668e88e0..bb71638a7c4 100644
--- a/drivers/net/ppp_generic.c
+++ b/drivers/net/ppp_generic.c
@@ -1657,7 +1657,6 @@ ppp_receive_nonmp_frame(struct ppp *ppp, struct sk_buff *skb)
skb->dev = ppp->dev;
skb->protocol = htons(npindex_to_ethertype[npi]);
skb->mac.raw = skb->data;
- skb->input_dev = ppp->dev;
netif_rx(skb);
ppp->dev->last_rx = jiffies;
}
diff --git a/drivers/net/pppoe.c b/drivers/net/pppoe.c
index ce1a9bf7b9a..82f236cc3b9 100644
--- a/drivers/net/pppoe.c
+++ b/drivers/net/pppoe.c
@@ -377,7 +377,8 @@ abort_kfree:
***********************************************************************/
static int pppoe_rcv(struct sk_buff *skb,
struct net_device *dev,
- struct packet_type *pt)
+ struct packet_type *pt,
+ struct net_device *orig_dev)
{
struct pppoe_hdr *ph;
@@ -426,7 +427,8 @@ out:
***********************************************************************/
static int pppoe_disc_rcv(struct sk_buff *skb,
struct net_device *dev,
- struct packet_type *pt)
+ struct packet_type *pt,
+ struct net_device *orig_dev)
{
struct pppoe_hdr *ph;
diff --git a/drivers/net/r8169.c b/drivers/net/r8169.c
index d5afe05cd82..f0471d102e3 100644
--- a/drivers/net/r8169.c
+++ b/drivers/net/r8169.c
@@ -187,6 +187,7 @@ static struct pci_device_id rtl8169_pci_tbl[] = {
{ PCI_DEVICE(PCI_VENDOR_ID_REALTEK, 0x8169), },
{ PCI_DEVICE(PCI_VENDOR_ID_DLINK, 0x4300), },
{ PCI_DEVICE(0x16ec, 0x0116), },
+ { PCI_VENDOR_ID_LINKSYS, 0x1032, PCI_ANY_ID, 0x0024, },
{0,},
};
diff --git a/drivers/net/rrunner.c b/drivers/net/rrunner.c
index 12a86f96d97..ec1a18d189a 100644
--- a/drivers/net/rrunner.c
+++ b/drivers/net/rrunner.c
@@ -1429,6 +1429,7 @@ static int rr_start_xmit(struct sk_buff *skb, struct net_device *dev)
{
struct rr_private *rrpriv = netdev_priv(dev);
struct rr_regs __iomem *regs = rrpriv->regs;
+ struct hippi_cb *hcb = (struct hippi_cb *) skb->cb;
struct ring_ctrl *txctrl;
unsigned long flags;
u32 index, len = skb->len;
@@ -1460,7 +1461,7 @@ static int rr_start_xmit(struct sk_buff *skb, struct net_device *dev)
ifield = (u32 *)skb_push(skb, 8);
ifield[0] = 0;
- ifield[1] = skb->private.ifield;
+ ifield[1] = hcb->ifield;
/*
* We don't need the lock before we are actually going to start
diff --git a/drivers/net/s2io-regs.h b/drivers/net/s2io-regs.h
index 7092ca6b277..2234a8f05eb 100644
--- a/drivers/net/s2io-regs.h
+++ b/drivers/net/s2io-regs.h
@@ -62,6 +62,7 @@ typedef struct _XENA_dev_config {
#define ADAPTER_STATUS_RMAC_REMOTE_FAULT BIT(6)
#define ADAPTER_STATUS_RMAC_LOCAL_FAULT BIT(7)
#define ADAPTER_STATUS_RMAC_PCC_IDLE vBIT(0xFF,8,8)
+#define ADAPTER_STATUS_RMAC_PCC_FOUR_IDLE vBIT(0x0F,8,8)
#define ADAPTER_STATUS_RC_PRC_QUIESCENT vBIT(0xFF,16,8)
#define ADAPTER_STATUS_MC_DRAM_READY BIT(24)
#define ADAPTER_STATUS_MC_QUEUES_READY BIT(25)
@@ -77,21 +78,34 @@ typedef struct _XENA_dev_config {
#define ADAPTER_ECC_EN BIT(55)
u64 serr_source;
-#define SERR_SOURCE_PIC BIT(0)
-#define SERR_SOURCE_TXDMA BIT(1)
-#define SERR_SOURCE_RXDMA BIT(2)
+#define SERR_SOURCE_PIC BIT(0)
+#define SERR_SOURCE_TXDMA BIT(1)
+#define SERR_SOURCE_RXDMA BIT(2)
#define SERR_SOURCE_MAC BIT(3)
#define SERR_SOURCE_MC BIT(4)
#define SERR_SOURCE_XGXS BIT(5)
-#define SERR_SOURCE_ANY (SERR_SOURCE_PIC | \
- SERR_SOURCE_TXDMA | \
- SERR_SOURCE_RXDMA | \
- SERR_SOURCE_MAC | \
- SERR_SOURCE_MC | \
- SERR_SOURCE_XGXS)
-
-
- u8 unused_0[0x800 - 0x120];
+#define SERR_SOURCE_ANY (SERR_SOURCE_PIC | \
+ SERR_SOURCE_TXDMA | \
+ SERR_SOURCE_RXDMA | \
+ SERR_SOURCE_MAC | \
+ SERR_SOURCE_MC | \
+ SERR_SOURCE_XGXS)
+
+ u64 pci_mode;
+#define GET_PCI_MODE(val) ((val & vBIT(0xF, 0, 4)) >> 60)
+#define PCI_MODE_PCI_33 0
+#define PCI_MODE_PCI_66 0x1
+#define PCI_MODE_PCIX_M1_66 0x2
+#define PCI_MODE_PCIX_M1_100 0x3
+#define PCI_MODE_PCIX_M1_133 0x4
+#define PCI_MODE_PCIX_M2_66 0x5
+#define PCI_MODE_PCIX_M2_100 0x6
+#define PCI_MODE_PCIX_M2_133 0x7
+#define PCI_MODE_UNSUPPORTED BIT(0)
+#define PCI_MODE_32_BITS BIT(8)
+#define PCI_MODE_UNKNOWN_MODE BIT(9)
+
+ u8 unused_0[0x800 - 0x128];
/* PCI-X Controller registers */
u64 pic_int_status;
@@ -153,7 +167,11 @@ typedef struct _XENA_dev_config {
u8 unused4[0x08];
u64 gpio_int_reg;
+#define GPIO_INT_REG_LINK_DOWN BIT(1)
+#define GPIO_INT_REG_LINK_UP BIT(2)
u64 gpio_int_mask;
+#define GPIO_INT_MASK_LINK_DOWN BIT(1)
+#define GPIO_INT_MASK_LINK_UP BIT(2)
u64 gpio_alarms;
u8 unused5[0x38];
@@ -223,19 +241,16 @@ typedef struct _XENA_dev_config {
u64 xmsi_data;
u64 rx_mat;
+#define RX_MAT_SET(ring, msi) vBIT(msi, (8 * ring), 8)
u8 unused6[0x8];
- u64 tx_mat0_7;
- u64 tx_mat8_15;
- u64 tx_mat16_23;
- u64 tx_mat24_31;
- u64 tx_mat32_39;
- u64 tx_mat40_47;
- u64 tx_mat48_55;
- u64 tx_mat56_63;
+ u64 tx_mat0_n[0x8];
+#define TX_MAT_SET(fifo, msi) vBIT(msi, (8 * fifo), 8)
- u8 unused_1[0x10];
+ u8 unused_1[0x8];
+ u64 stat_byte_cnt;
+#define STAT_BC(n) vBIT(n,4,12)
/* Automated statistics collection */
u64 stat_cfg;
@@ -246,6 +261,7 @@ typedef struct _XENA_dev_config {
#define STAT_TRSF_PER(n) TBD
#define PER_SEC 0x208d5
#define SET_UPDT_PERIOD(n) vBIT((PER_SEC*n),32,32)
+#define SET_UPDT_CLICKS(val) vBIT(val, 32, 32)
u64 stat_addr;
@@ -267,8 +283,15 @@ typedef struct _XENA_dev_config {
u64 gpio_control;
#define GPIO_CTRL_GPIO_0 BIT(8)
+ u64 misc_control;
+#define MISC_LINK_STABILITY_PRD(val) vBIT(val,29,3)
+
+ u8 unused7_1[0x240 - 0x208];
+
+ u64 wreq_split_mask;
+#define WREQ_SPLIT_MASK_SET_MASK(val) vBIT(val, 52, 12)
- u8 unused7[0x600];
+ u8 unused7_2[0x800 - 0x248];
/* TxDMA registers */
u64 txdma_int_status;
@@ -290,6 +313,7 @@ typedef struct _XENA_dev_config {
u64 pcc_err_reg;
#define PCC_FB_ECC_DB_ERR vBIT(0xFF, 16, 8)
+#define PCC_ENABLE_FOUR vBIT(0x0F,0,8)
u64 pcc_err_mask;
u64 pcc_err_alarm;
@@ -468,6 +492,7 @@ typedef struct _XENA_dev_config {
#define PRC_CTRL_NO_SNOOP (BIT(22)|BIT(23))
#define PRC_CTRL_NO_SNOOP_DESC BIT(22)
#define PRC_CTRL_NO_SNOOP_BUFF BIT(23)
+#define PRC_CTRL_BIMODAL_INTERRUPT BIT(37)
#define PRC_CTRL_RXD_BACKOFF_INTERVAL(val) vBIT(val,40,24)
u64 prc_alarm_action;
@@ -691,6 +716,10 @@ typedef struct _XENA_dev_config {
#define MC_ERR_REG_MIRI_CRI_ERR_0 BIT(22)
#define MC_ERR_REG_MIRI_CRI_ERR_1 BIT(23)
#define MC_ERR_REG_SM_ERR BIT(31)
+#define MC_ERR_REG_ECC_ALL_SNG (BIT(6) | \
+ BIT(7) | BIT(17) | BIT(19))
+#define MC_ERR_REG_ECC_ALL_DBL (BIT(14) | \
+ BIT(15) | BIT(18) | BIT(20))
u64 mc_err_mask;
u64 mc_err_alarm;
@@ -736,7 +765,19 @@ typedef struct _XENA_dev_config {
u64 mc_rldram_test_d1;
u8 unused24[0x300 - 0x288];
u64 mc_rldram_test_d2;
- u8 unused25[0x700 - 0x308];
+
+ u8 unused24_1[0x360 - 0x308];
+ u64 mc_rldram_ctrl;
+#define MC_RLDRAM_ENABLE_ODT BIT(7)
+
+ u8 unused24_2[0x640 - 0x368];
+ u64 mc_rldram_ref_per_herc;
+#define MC_RLDRAM_SET_REF_PERIOD(val) vBIT(val, 0, 16)
+
+ u8 unused24_3[0x660 - 0x648];
+ u64 mc_rldram_mrs_herc;
+
+ u8 unused25[0x700 - 0x668];
u64 mc_debug_ctrl;
u8 unused26[0x3000 - 0x2f08];
diff --git a/drivers/net/s2io.c b/drivers/net/s2io.c
index ea638b162d3..7ca78228b10 100644
--- a/drivers/net/s2io.c
+++ b/drivers/net/s2io.c
@@ -11,29 +11,28 @@
* See the file COPYING in this distribution for more information.
*
* Credits:
- * Jeff Garzik : For pointing out the improper error condition
- * check in the s2io_xmit routine and also some
- * issues in the Tx watch dog function. Also for
- * patiently answering all those innumerable
+ * Jeff Garzik : For pointing out the improper error condition
+ * check in the s2io_xmit routine and also some
+ * issues in the Tx watch dog function. Also for
+ * patiently answering all those innumerable
* questions regaring the 2.6 porting issues.
* Stephen Hemminger : Providing proper 2.6 porting mechanism for some
* macros available only in 2.6 Kernel.
- * Francois Romieu : For pointing out all code part that were
+ * Francois Romieu : For pointing out all code part that were
* deprecated and also styling related comments.
- * Grant Grundler : For helping me get rid of some Architecture
+ * Grant Grundler : For helping me get rid of some Architecture
* dependent code.
* Christopher Hellwig : Some more 2.6 specific issues in the driver.
- *
+ *
* The module loadable parameters that are supported by the driver and a brief
* explaination of all the variables.
- * rx_ring_num : This can be used to program the number of receive rings used
- * in the driver.
- * rx_ring_len: This defines the number of descriptors each ring can have. This
+ * rx_ring_num : This can be used to program the number of receive rings used
+ * in the driver.
+ * rx_ring_len: This defines the number of descriptors each ring can have. This
* is also an array of size 8.
* tx_fifo_num: This defines the number of Tx FIFOs thats used int the driver.
- * tx_fifo_len: This too is an array of 8. Each element defines the number of
+ * tx_fifo_len: This too is an array of 8. Each element defines the number of
* Tx descriptors that can be associated with each corresponding FIFO.
- * in PCI Configuration space.
************************************************************************/
#include <linux/config.h>
@@ -56,27 +55,39 @@
#include <linux/ethtool.h>
#include <linux/version.h>
#include <linux/workqueue.h>
+#include <linux/if_vlan.h>
-#include <asm/io.h>
#include <asm/system.h>
#include <asm/uaccess.h>
+#include <asm/io.h>
/* local include */
#include "s2io.h"
#include "s2io-regs.h"
/* S2io Driver name & version. */
-static char s2io_driver_name[] = "s2io";
-static char s2io_driver_version[] = "Version 1.7.7.1";
+static char s2io_driver_name[] = "Neterion";
+static char s2io_driver_version[] = "Version 2.0.3.1";
+
+static inline int RXD_IS_UP2DT(RxD_t *rxdp)
+{
+ int ret;
+
+ ret = ((!(rxdp->Control_1 & RXD_OWN_XENA)) &&
+ (GET_RXD_MARKER(rxdp->Control_2) != THE_RXD_MARK));
-/*
+ return ret;
+}
+
+/*
* Cards with following subsystem_id have a link state indication
* problem, 600B, 600C, 600D, 640B, 640C and 640D.
* macro below identifies these cards given the subsystem_id.
*/
-#define CARDS_WITH_FAULTY_LINK_INDICATORS(subid) \
- (((subid >= 0x600B) && (subid <= 0x600D)) || \
- ((subid >= 0x640B) && (subid <= 0x640D))) ? 1 : 0
+#define CARDS_WITH_FAULTY_LINK_INDICATORS(dev_type, subid) \
+ (dev_type == XFRAME_I_DEVICE) ? \
+ ((((subid >= 0x600B) && (subid <= 0x600D)) || \
+ ((subid >= 0x640B) && (subid <= 0x640D))) ? 1 : 0) : 0
#define LINK_IS_UP(val64) (!(val64 & (ADAPTER_STATUS_RMAC_REMOTE_FAULT | \
ADAPTER_STATUS_RMAC_LOCAL_FAULT)))
@@ -86,9 +97,12 @@ static char s2io_driver_version[] = "Version 1.7.7.1";
static inline int rx_buffer_level(nic_t * sp, int rxb_size, int ring)
{
int level = 0;
- if ((sp->pkt_cnt[ring] - rxb_size) > 16) {
+ mac_info_t *mac_control;
+
+ mac_control = &sp->mac_control;
+ if ((mac_control->rings[ring].pkt_cnt - rxb_size) > 16) {
level = LOW;
- if ((sp->pkt_cnt[ring] - rxb_size) < MAX_RXDS_PER_BLOCK) {
+ if (rxb_size <= MAX_RXDS_PER_BLOCK) {
level = PANIC;
}
}
@@ -145,6 +159,9 @@ static char ethtool_stats_keys[][ETH_GSTRING_LEN] = {
{"rmac_pause_cnt"},
{"rmac_accepted_ip"},
{"rmac_err_tcp"},
+ {"\n DRIVER STATISTICS"},
+ {"single_bit_ecc_errs"},
+ {"double_bit_ecc_errs"},
};
#define S2IO_STAT_LEN sizeof(ethtool_stats_keys)/ ETH_GSTRING_LEN
@@ -153,8 +170,37 @@ static char ethtool_stats_keys[][ETH_GSTRING_LEN] = {
#define S2IO_TEST_LEN sizeof(s2io_gstrings) / ETH_GSTRING_LEN
#define S2IO_STRINGS_LEN S2IO_TEST_LEN * ETH_GSTRING_LEN
+#define S2IO_TIMER_CONF(timer, handle, arg, exp) \
+ init_timer(&timer); \
+ timer.function = handle; \
+ timer.data = (unsigned long) arg; \
+ mod_timer(&timer, (jiffies + exp)) \
+
+/* Add the vlan */
+static void s2io_vlan_rx_register(struct net_device *dev,
+ struct vlan_group *grp)
+{
+ nic_t *nic = dev->priv;
+ unsigned long flags;
+
+ spin_lock_irqsave(&nic->tx_lock, flags);
+ nic->vlgrp = grp;
+ spin_unlock_irqrestore(&nic->tx_lock, flags);
+}
+
+/* Unregister the vlan */
+static void s2io_vlan_rx_kill_vid(struct net_device *dev, unsigned long vid)
+{
+ nic_t *nic = dev->priv;
+ unsigned long flags;
+
+ spin_lock_irqsave(&nic->tx_lock, flags);
+ if (nic->vlgrp)
+ nic->vlgrp->vlan_devices[vid] = NULL;
+ spin_unlock_irqrestore(&nic->tx_lock, flags);
+}
-/*
+/*
* Constants to be programmed into the Xena's registers, to configure
* the XAUI.
*/
@@ -162,7 +208,28 @@ static char ethtool_stats_keys[][ETH_GSTRING_LEN] = {
#define SWITCH_SIGN 0xA5A5A5A5A5A5A5A5ULL
#define END_SIGN 0x0
-static u64 default_mdio_cfg[] = {
+static u64 herc_act_dtx_cfg[] = {
+ /* Set address */
+ 0x8000051536750000ULL, 0x80000515367500E0ULL,
+ /* Write data */
+ 0x8000051536750004ULL, 0x80000515367500E4ULL,
+ /* Set address */
+ 0x80010515003F0000ULL, 0x80010515003F00E0ULL,
+ /* Write data */
+ 0x80010515003F0004ULL, 0x80010515003F00E4ULL,
+ /* Set address */
+ 0x801205150D440000ULL, 0x801205150D4400E0ULL,
+ /* Write data */
+ 0x801205150D440004ULL, 0x801205150D4400E4ULL,
+ /* Set address */
+ 0x80020515F2100000ULL, 0x80020515F21000E0ULL,
+ /* Write data */
+ 0x80020515F2100004ULL, 0x80020515F21000E4ULL,
+ /* Done */
+ END_SIGN
+};
+
+static u64 xena_mdio_cfg[] = {
/* Reset PMA PLL */
0xC001010000000000ULL, 0xC0010100000000E0ULL,
0xC0010100008000E4ULL,
@@ -172,7 +239,7 @@ static u64 default_mdio_cfg[] = {
END_SIGN
};
-static u64 default_dtx_cfg[] = {
+static u64 xena_dtx_cfg[] = {
0x8000051500000000ULL, 0x80000515000000E0ULL,
0x80000515D93500E4ULL, 0x8001051500000000ULL,
0x80010515000000E0ULL, 0x80010515001E00E4ULL,
@@ -196,8 +263,7 @@ static u64 default_dtx_cfg[] = {
END_SIGN
};
-
-/*
+/*
* Constants for Fixing the MacAddress problem seen mostly on
* Alpha machines.
*/
@@ -226,20 +292,25 @@ static unsigned int tx_fifo_len[MAX_TX_FIFOS] =
static unsigned int rx_ring_num = 1;
static unsigned int rx_ring_sz[MAX_RX_RINGS] =
{[0 ...(MAX_RX_RINGS - 1)] = 0 };
-static unsigned int Stats_refresh_time = 4;
+static unsigned int rts_frm_len[MAX_RX_RINGS] =
+ {[0 ...(MAX_RX_RINGS - 1)] = 0 };
+static unsigned int use_continuous_tx_intrs = 1;
static unsigned int rmac_pause_time = 65535;
static unsigned int mc_pause_threshold_q0q3 = 187;
static unsigned int mc_pause_threshold_q4q7 = 187;
static unsigned int shared_splits;
static unsigned int tmac_util_period = 5;
static unsigned int rmac_util_period = 5;
+static unsigned int bimodal = 0;
#ifndef CONFIG_S2IO_NAPI
static unsigned int indicate_max_pkts;
#endif
+/* Frequency of Rx desc syncs expressed as power of 2 */
+static unsigned int rxsync_frequency = 3;
-/*
+/*
* S2IO device table.
- * This table lists all the devices that this driver supports.
+ * This table lists all the devices that this driver supports.
*/
static struct pci_device_id s2io_tbl[] __devinitdata = {
{PCI_VENDOR_ID_S2IO, PCI_DEVICE_ID_S2IO_WIN,
@@ -247,9 +318,9 @@ static struct pci_device_id s2io_tbl[] __devinitdata = {
{PCI_VENDOR_ID_S2IO, PCI_DEVICE_ID_S2IO_UNI,
PCI_ANY_ID, PCI_ANY_ID},
{PCI_VENDOR_ID_S2IO, PCI_DEVICE_ID_HERC_WIN,
- PCI_ANY_ID, PCI_ANY_ID},
- {PCI_VENDOR_ID_S2IO, PCI_DEVICE_ID_HERC_UNI,
- PCI_ANY_ID, PCI_ANY_ID},
+ PCI_ANY_ID, PCI_ANY_ID},
+ {PCI_VENDOR_ID_S2IO, PCI_DEVICE_ID_HERC_UNI,
+ PCI_ANY_ID, PCI_ANY_ID},
{0,}
};
@@ -268,8 +339,8 @@ static struct pci_driver s2io_driver = {
/**
* init_shared_mem - Allocation and Initialization of Memory
* @nic: Device private variable.
- * Description: The function allocates all the memory areas shared
- * between the NIC and the driver. This includes Tx descriptors,
+ * Description: The function allocates all the memory areas shared
+ * between the NIC and the driver. This includes Tx descriptors,
* Rx descriptors and the statistics block.
*/
@@ -279,11 +350,11 @@ static int init_shared_mem(struct s2io_nic *nic)
void *tmp_v_addr, *tmp_v_addr_next;
dma_addr_t tmp_p_addr, tmp_p_addr_next;
RxD_block_t *pre_rxd_blk = NULL;
- int i, j, blk_cnt;
+ int i, j, blk_cnt, rx_sz, tx_sz;
int lst_size, lst_per_page;
struct net_device *dev = nic->dev;
#ifdef CONFIG_2BUFF_MODE
- unsigned long tmp;
+ u64 tmp;
buffAdd_t *ba;
#endif
@@ -300,36 +371,41 @@ static int init_shared_mem(struct s2io_nic *nic)
size += config->tx_cfg[i].fifo_len;
}
if (size > MAX_AVAILABLE_TXDS) {
- DBG_PRINT(ERR_DBG, "%s: Total number of Tx FIFOs ",
- dev->name);
- DBG_PRINT(ERR_DBG, "exceeds the maximum value ");
- DBG_PRINT(ERR_DBG, "that can be used\n");
+ DBG_PRINT(ERR_DBG, "%s: Requested TxDs too high, ",
+ __FUNCTION__);
+ DBG_PRINT(ERR_DBG, "Requested: %d, max supported: 8192\n", size);
return FAILURE;
}
lst_size = (sizeof(TxD_t) * config->max_txds);
+ tx_sz = lst_size * size;
lst_per_page = PAGE_SIZE / lst_size;
for (i = 0; i < config->tx_fifo_num; i++) {
int fifo_len = config->tx_cfg[i].fifo_len;
int list_holder_size = fifo_len * sizeof(list_info_hold_t);
- nic->list_info[i] = kmalloc(list_holder_size, GFP_KERNEL);
- if (!nic->list_info[i]) {
+ mac_control->fifos[i].list_info = kmalloc(list_holder_size,
+ GFP_KERNEL);
+ if (!mac_control->fifos[i].list_info) {
DBG_PRINT(ERR_DBG,
"Malloc failed for list_info\n");
return -ENOMEM;
}
- memset(nic->list_info[i], 0, list_holder_size);
+ memset(mac_control->fifos[i].list_info, 0, list_holder_size);
}
for (i = 0; i < config->tx_fifo_num; i++) {
int page_num = TXD_MEM_PAGE_CNT(config->tx_cfg[i].fifo_len,
lst_per_page);
- mac_control->tx_curr_put_info[i].offset = 0;
- mac_control->tx_curr_put_info[i].fifo_len =
+ mac_control->fifos[i].tx_curr_put_info.offset = 0;
+ mac_control->fifos[i].tx_curr_put_info.fifo_len =
config->tx_cfg[i].fifo_len - 1;
- mac_control->tx_curr_get_info[i].offset = 0;
- mac_control->tx_curr_get_info[i].fifo_len =
+ mac_control->fifos[i].tx_curr_get_info.offset = 0;
+ mac_control->fifos[i].tx_curr_get_info.fifo_len =
config->tx_cfg[i].fifo_len - 1;
+ mac_control->fifos[i].fifo_no = i;
+ mac_control->fifos[i].nic = nic;
+ mac_control->fifos[i].max_txds = MAX_SKB_FRAGS;
+
for (j = 0; j < page_num; j++) {
int k = 0;
dma_addr_t tmp_p;
@@ -345,16 +421,15 @@ static int init_shared_mem(struct s2io_nic *nic)
while (k < lst_per_page) {
int l = (j * lst_per_page) + k;
if (l == config->tx_cfg[i].fifo_len)
- goto end_txd_alloc;
- nic->list_info[i][l].list_virt_addr =
+ break;
+ mac_control->fifos[i].list_info[l].list_virt_addr =
tmp_v + (k * lst_size);
- nic->list_info[i][l].list_phy_addr =
+ mac_control->fifos[i].list_info[l].list_phy_addr =
tmp_p + (k * lst_size);
k++;
}
}
}
- end_txd_alloc:
/* Allocation and initialization of RXDs in Rings */
size = 0;
@@ -367,21 +442,26 @@ static int init_shared_mem(struct s2io_nic *nic)
return FAILURE;
}
size += config->rx_cfg[i].num_rxd;
- nic->block_count[i] =
+ mac_control->rings[i].block_count =
config->rx_cfg[i].num_rxd / (MAX_RXDS_PER_BLOCK + 1);
- nic->pkt_cnt[i] =
- config->rx_cfg[i].num_rxd - nic->block_count[i];
+ mac_control->rings[i].pkt_cnt =
+ config->rx_cfg[i].num_rxd - mac_control->rings[i].block_count;
}
+ size = (size * (sizeof(RxD_t)));
+ rx_sz = size;
for (i = 0; i < config->rx_ring_num; i++) {
- mac_control->rx_curr_get_info[i].block_index = 0;
- mac_control->rx_curr_get_info[i].offset = 0;
- mac_control->rx_curr_get_info[i].ring_len =
+ mac_control->rings[i].rx_curr_get_info.block_index = 0;
+ mac_control->rings[i].rx_curr_get_info.offset = 0;
+ mac_control->rings[i].rx_curr_get_info.ring_len =
config->rx_cfg[i].num_rxd - 1;
- mac_control->rx_curr_put_info[i].block_index = 0;
- mac_control->rx_curr_put_info[i].offset = 0;
- mac_control->rx_curr_put_info[i].ring_len =
+ mac_control->rings[i].rx_curr_put_info.block_index = 0;
+ mac_control->rings[i].rx_curr_put_info.offset = 0;
+ mac_control->rings[i].rx_curr_put_info.ring_len =
config->rx_cfg[i].num_rxd - 1;
+ mac_control->rings[i].nic = nic;
+ mac_control->rings[i].ring_no = i;
+
blk_cnt =
config->rx_cfg[i].num_rxd / (MAX_RXDS_PER_BLOCK + 1);
/* Allocating all the Rx blocks */
@@ -395,32 +475,36 @@ static int init_shared_mem(struct s2io_nic *nic)
&tmp_p_addr);
if (tmp_v_addr == NULL) {
/*
- * In case of failure, free_shared_mem()
- * is called, which should free any
- * memory that was alloced till the
+ * In case of failure, free_shared_mem()
+ * is called, which should free any
+ * memory that was alloced till the
* failure happened.
*/
- nic->rx_blocks[i][j].block_virt_addr =
+ mac_control->rings[i].rx_blocks[j].block_virt_addr =
tmp_v_addr;
return -ENOMEM;
}
memset(tmp_v_addr, 0, size);
- nic->rx_blocks[i][j].block_virt_addr = tmp_v_addr;
- nic->rx_blocks[i][j].block_dma_addr = tmp_p_addr;
+ mac_control->rings[i].rx_blocks[j].block_virt_addr =
+ tmp_v_addr;
+ mac_control->rings[i].rx_blocks[j].block_dma_addr =
+ tmp_p_addr;
}
/* Interlinking all Rx Blocks */
for (j = 0; j < blk_cnt; j++) {
- tmp_v_addr = nic->rx_blocks[i][j].block_virt_addr;
+ tmp_v_addr =
+ mac_control->rings[i].rx_blocks[j].block_virt_addr;
tmp_v_addr_next =
- nic->rx_blocks[i][(j + 1) %
+ mac_control->rings[i].rx_blocks[(j + 1) %
blk_cnt].block_virt_addr;
- tmp_p_addr = nic->rx_blocks[i][j].block_dma_addr;
+ tmp_p_addr =
+ mac_control->rings[i].rx_blocks[j].block_dma_addr;
tmp_p_addr_next =
- nic->rx_blocks[i][(j + 1) %
+ mac_control->rings[i].rx_blocks[(j + 1) %
blk_cnt].block_dma_addr;
pre_rxd_blk = (RxD_block_t *) tmp_v_addr;
- pre_rxd_blk->reserved_1 = END_OF_BLOCK; /* last RxD
+ pre_rxd_blk->reserved_1 = END_OF_BLOCK; /* last RxD
* marker.
*/
#ifndef CONFIG_2BUFF_MODE
@@ -433,43 +517,43 @@ static int init_shared_mem(struct s2io_nic *nic)
}
#ifdef CONFIG_2BUFF_MODE
- /*
+ /*
* Allocation of Storages for buffer addresses in 2BUFF mode
* and the buffers as well.
*/
for (i = 0; i < config->rx_ring_num; i++) {
blk_cnt =
config->rx_cfg[i].num_rxd / (MAX_RXDS_PER_BLOCK + 1);
- nic->ba[i] = kmalloc((sizeof(buffAdd_t *) * blk_cnt),
+ mac_control->rings[i].ba = kmalloc((sizeof(buffAdd_t *) * blk_cnt),
GFP_KERNEL);
- if (!nic->ba[i])
+ if (!mac_control->rings[i].ba)
return -ENOMEM;
for (j = 0; j < blk_cnt; j++) {
int k = 0;
- nic->ba[i][j] = kmalloc((sizeof(buffAdd_t) *
+ mac_control->rings[i].ba[j] = kmalloc((sizeof(buffAdd_t) *
(MAX_RXDS_PER_BLOCK + 1)),
GFP_KERNEL);
- if (!nic->ba[i][j])
+ if (!mac_control->rings[i].ba[j])
return -ENOMEM;
while (k != MAX_RXDS_PER_BLOCK) {
- ba = &nic->ba[i][j][k];
+ ba = &mac_control->rings[i].ba[j][k];
- ba->ba_0_org = kmalloc
+ ba->ba_0_org = (void *) kmalloc
(BUF0_LEN + ALIGN_SIZE, GFP_KERNEL);
if (!ba->ba_0_org)
return -ENOMEM;
- tmp = (unsigned long) ba->ba_0_org;
+ tmp = (u64) ba->ba_0_org;
tmp += ALIGN_SIZE;
- tmp &= ~((unsigned long) ALIGN_SIZE);
+ tmp &= ~((u64) ALIGN_SIZE);
ba->ba_0 = (void *) tmp;
- ba->ba_1_org = kmalloc
+ ba->ba_1_org = (void *) kmalloc
(BUF1_LEN + ALIGN_SIZE, GFP_KERNEL);
if (!ba->ba_1_org)
return -ENOMEM;
- tmp = (unsigned long) ba->ba_1_org;
+ tmp = (u64) ba->ba_1_org;
tmp += ALIGN_SIZE;
- tmp &= ~((unsigned long) ALIGN_SIZE);
+ tmp &= ~((u64) ALIGN_SIZE);
ba->ba_1 = (void *) tmp;
k++;
}
@@ -483,9 +567,9 @@ static int init_shared_mem(struct s2io_nic *nic)
(nic->pdev, size, &mac_control->stats_mem_phy);
if (!mac_control->stats_mem) {
- /*
- * In case of failure, free_shared_mem() is called, which
- * should free any memory that was alloced till the
+ /*
+ * In case of failure, free_shared_mem() is called, which
+ * should free any memory that was alloced till the
* failure happened.
*/
return -ENOMEM;
@@ -495,15 +579,14 @@ static int init_shared_mem(struct s2io_nic *nic)
tmp_v_addr = mac_control->stats_mem;
mac_control->stats_info = (StatInfo_t *) tmp_v_addr;
memset(tmp_v_addr, 0, size);
-
DBG_PRINT(INIT_DBG, "%s:Ring Mem PHY: 0x%llx\n", dev->name,
(unsigned long long) tmp_p_addr);
return SUCCESS;
}
-/**
- * free_shared_mem - Free the allocated Memory
+/**
+ * free_shared_mem - Free the allocated Memory
* @nic: Device private variable.
* Description: This function is to free all memory locations allocated by
* the init_shared_mem() function and return it to the kernel.
@@ -533,15 +616,19 @@ static void free_shared_mem(struct s2io_nic *nic)
lst_per_page);
for (j = 0; j < page_num; j++) {
int mem_blks = (j * lst_per_page);
- if (!nic->list_info[i][mem_blks].list_virt_addr)
+ if ((!mac_control->fifos[i].list_info) ||
+ (!mac_control->fifos[i].list_info[mem_blks].
+ list_virt_addr))
break;
pci_free_consistent(nic->pdev, PAGE_SIZE,
- nic->list_info[i][mem_blks].
+ mac_control->fifos[i].
+ list_info[mem_blks].
list_virt_addr,
- nic->list_info[i][mem_blks].
+ mac_control->fifos[i].
+ list_info[mem_blks].
list_phy_addr);
}
- kfree(nic->list_info[i]);
+ kfree(mac_control->fifos[i].list_info);
}
#ifndef CONFIG_2BUFF_MODE
@@ -550,10 +637,12 @@ static void free_shared_mem(struct s2io_nic *nic)
size = SIZE_OF_BLOCK;
#endif
for (i = 0; i < config->rx_ring_num; i++) {
- blk_cnt = nic->block_count[i];
+ blk_cnt = mac_control->rings[i].block_count;
for (j = 0; j < blk_cnt; j++) {
- tmp_v_addr = nic->rx_blocks[i][j].block_virt_addr;
- tmp_p_addr = nic->rx_blocks[i][j].block_dma_addr;
+ tmp_v_addr = mac_control->rings[i].rx_blocks[j].
+ block_virt_addr;
+ tmp_p_addr = mac_control->rings[i].rx_blocks[j].
+ block_dma_addr;
if (tmp_v_addr == NULL)
break;
pci_free_consistent(nic->pdev, size,
@@ -566,35 +655,21 @@ static void free_shared_mem(struct s2io_nic *nic)
for (i = 0; i < config->rx_ring_num; i++) {
blk_cnt =
config->rx_cfg[i].num_rxd / (MAX_RXDS_PER_BLOCK + 1);
- if (!nic->ba[i])
- goto end_free;
for (j = 0; j < blk_cnt; j++) {
int k = 0;
- if (!nic->ba[i][j]) {
- kfree(nic->ba[i]);
- goto end_free;
- }
+ if (!mac_control->rings[i].ba[j])
+ continue;
while (k != MAX_RXDS_PER_BLOCK) {
- buffAdd_t *ba = &nic->ba[i][j][k];
- if (!ba || !ba->ba_0_org || !ba->ba_1_org)
- {
- kfree(nic->ba[i]);
- kfree(nic->ba[i][j]);
- if(ba->ba_0_org)
- kfree(ba->ba_0_org);
- if(ba->ba_1_org)
- kfree(ba->ba_1_org);
- goto end_free;
- }
+ buffAdd_t *ba = &mac_control->rings[i].ba[j][k];
kfree(ba->ba_0_org);
kfree(ba->ba_1_org);
k++;
}
- kfree(nic->ba[i][j]);
+ kfree(mac_control->rings[i].ba[j]);
}
- kfree(nic->ba[i]);
+ if (mac_control->rings[i].ba)
+ kfree(mac_control->rings[i].ba);
}
-end_free:
#endif
if (mac_control->stats_mem) {
@@ -605,12 +680,93 @@ end_free:
}
}
-/**
- * init_nic - Initialization of hardware
+/**
+ * s2io_verify_pci_mode -
+ */
+
+static int s2io_verify_pci_mode(nic_t *nic)
+{
+ XENA_dev_config_t *bar0 = (XENA_dev_config_t *) nic->bar0;
+ register u64 val64 = 0;
+ int mode;
+
+ val64 = readq(&bar0->pci_mode);
+ mode = (u8)GET_PCI_MODE(val64);
+
+ if ( val64 & PCI_MODE_UNKNOWN_MODE)
+ return -1; /* Unknown PCI mode */
+ return mode;
+}
+
+
+/**
+ * s2io_print_pci_mode -
+ */
+static int s2io_print_pci_mode(nic_t *nic)
+{
+ XENA_dev_config_t *bar0 = (XENA_dev_config_t *) nic->bar0;
+ register u64 val64 = 0;
+ int mode;
+ struct config_param *config = &nic->config;
+
+ val64 = readq(&bar0->pci_mode);
+ mode = (u8)GET_PCI_MODE(val64);
+
+ if ( val64 & PCI_MODE_UNKNOWN_MODE)
+ return -1; /* Unknown PCI mode */
+
+ if (val64 & PCI_MODE_32_BITS) {
+ DBG_PRINT(ERR_DBG, "%s: Device is on 32 bit ", nic->dev->name);
+ } else {
+ DBG_PRINT(ERR_DBG, "%s: Device is on 64 bit ", nic->dev->name);
+ }
+
+ switch(mode) {
+ case PCI_MODE_PCI_33:
+ DBG_PRINT(ERR_DBG, "33MHz PCI bus\n");
+ config->bus_speed = 33;
+ break;
+ case PCI_MODE_PCI_66:
+ DBG_PRINT(ERR_DBG, "66MHz PCI bus\n");
+ config->bus_speed = 133;
+ break;
+ case PCI_MODE_PCIX_M1_66:
+ DBG_PRINT(ERR_DBG, "66MHz PCIX(M1) bus\n");
+ config->bus_speed = 133; /* Herc doubles the clock rate */
+ break;
+ case PCI_MODE_PCIX_M1_100:
+ DBG_PRINT(ERR_DBG, "100MHz PCIX(M1) bus\n");
+ config->bus_speed = 200;
+ break;
+ case PCI_MODE_PCIX_M1_133:
+ DBG_PRINT(ERR_DBG, "133MHz PCIX(M1) bus\n");
+ config->bus_speed = 266;
+ break;
+ case PCI_MODE_PCIX_M2_66:
+ DBG_PRINT(ERR_DBG, "133MHz PCIX(M2) bus\n");
+ config->bus_speed = 133;
+ break;
+ case PCI_MODE_PCIX_M2_100:
+ DBG_PRINT(ERR_DBG, "200MHz PCIX(M2) bus\n");
+ config->bus_speed = 200;
+ break;
+ case PCI_MODE_PCIX_M2_133:
+ DBG_PRINT(ERR_DBG, "266MHz PCIX(M2) bus\n");
+ config->bus_speed = 266;
+ break;
+ default:
+ return -1; /* Unsupported bus speed */
+ }
+
+ return mode;
+}
+
+/**
+ * init_nic - Initialization of hardware
* @nic: device peivate variable
- * Description: The function sequentially configures every block
- * of the H/W from their reset values.
- * Return Value: SUCCESS on success and
+ * Description: The function sequentially configures every block
+ * of the H/W from their reset values.
+ * Return Value: SUCCESS on success and
* '-1' on failure (endian settings incorrect).
*/
@@ -626,21 +782,32 @@ static int init_nic(struct s2io_nic *nic)
struct config_param *config;
int mdio_cnt = 0, dtx_cnt = 0;
unsigned long long mem_share;
+ int mem_size;
mac_control = &nic->mac_control;
config = &nic->config;
- /* Initialize swapper control register */
- if (s2io_set_swapper(nic)) {
+ /* to set the swapper controle on the card */
+ if(s2io_set_swapper(nic)) {
DBG_PRINT(ERR_DBG,"ERROR: Setting Swapper failed\n");
return -1;
}
+ /*
+ * Herc requires EOI to be removed from reset before XGXS, so..
+ */
+ if (nic->device_type & XFRAME_II_DEVICE) {
+ val64 = 0xA500000000ULL;
+ writeq(val64, &bar0->sw_reset);
+ msleep(500);
+ val64 = readq(&bar0->sw_reset);
+ }
+
/* Remove XGXS from reset state */
val64 = 0;
writeq(val64, &bar0->sw_reset);
- val64 = readq(&bar0->sw_reset);
msleep(500);
+ val64 = readq(&bar0->sw_reset);
/* Enable Receiving broadcasts */
add = &bar0->mac_cfg;
@@ -660,48 +827,58 @@ static int init_nic(struct s2io_nic *nic)
val64 = dev->mtu;
writeq(vBIT(val64, 2, 14), &bar0->rmac_max_pyld_len);
- /*
- * Configuring the XAUI Interface of Xena.
+ /*
+ * Configuring the XAUI Interface of Xena.
* ***************************************
- * To Configure the Xena's XAUI, one has to write a series
- * of 64 bit values into two registers in a particular
- * sequence. Hence a macro 'SWITCH_SIGN' has been defined
- * which will be defined in the array of configuration values
- * (default_dtx_cfg & default_mdio_cfg) at appropriate places
- * to switch writing from one regsiter to another. We continue
+ * To Configure the Xena's XAUI, one has to write a series
+ * of 64 bit values into two registers in a particular
+ * sequence. Hence a macro 'SWITCH_SIGN' has been defined
+ * which will be defined in the array of configuration values
+ * (xena_dtx_cfg & xena_mdio_cfg) at appropriate places
+ * to switch writing from one regsiter to another. We continue
* writing these values until we encounter the 'END_SIGN' macro.
- * For example, After making a series of 21 writes into
- * dtx_control register the 'SWITCH_SIGN' appears and hence we
+ * For example, After making a series of 21 writes into
+ * dtx_control register the 'SWITCH_SIGN' appears and hence we
* start writing into mdio_control until we encounter END_SIGN.
*/
- while (1) {
- dtx_cfg:
- while (default_dtx_cfg[dtx_cnt] != END_SIGN) {
- if (default_dtx_cfg[dtx_cnt] == SWITCH_SIGN) {
- dtx_cnt++;
- goto mdio_cfg;
- }
- SPECIAL_REG_WRITE(default_dtx_cfg[dtx_cnt],
+ if (nic->device_type & XFRAME_II_DEVICE) {
+ while (herc_act_dtx_cfg[dtx_cnt] != END_SIGN) {
+ SPECIAL_REG_WRITE(herc_act_dtx_cfg[dtx_cnt],
&bar0->dtx_control, UF);
- val64 = readq(&bar0->dtx_control);
+ if (dtx_cnt & 0x1)
+ msleep(1); /* Necessary!! */
dtx_cnt++;
}
- mdio_cfg:
- while (default_mdio_cfg[mdio_cnt] != END_SIGN) {
- if (default_mdio_cfg[mdio_cnt] == SWITCH_SIGN) {
+ } else {
+ while (1) {
+ dtx_cfg:
+ while (xena_dtx_cfg[dtx_cnt] != END_SIGN) {
+ if (xena_dtx_cfg[dtx_cnt] == SWITCH_SIGN) {
+ dtx_cnt++;
+ goto mdio_cfg;
+ }
+ SPECIAL_REG_WRITE(xena_dtx_cfg[dtx_cnt],
+ &bar0->dtx_control, UF);
+ val64 = readq(&bar0->dtx_control);
+ dtx_cnt++;
+ }
+ mdio_cfg:
+ while (xena_mdio_cfg[mdio_cnt] != END_SIGN) {
+ if (xena_mdio_cfg[mdio_cnt] == SWITCH_SIGN) {
+ mdio_cnt++;
+ goto dtx_cfg;
+ }
+ SPECIAL_REG_WRITE(xena_mdio_cfg[mdio_cnt],
+ &bar0->mdio_control, UF);
+ val64 = readq(&bar0->mdio_control);
mdio_cnt++;
+ }
+ if ((xena_dtx_cfg[dtx_cnt] == END_SIGN) &&
+ (xena_mdio_cfg[mdio_cnt] == END_SIGN)) {
+ break;
+ } else {
goto dtx_cfg;
}
- SPECIAL_REG_WRITE(default_mdio_cfg[mdio_cnt],
- &bar0->mdio_control, UF);
- val64 = readq(&bar0->mdio_control);
- mdio_cnt++;
- }
- if ((default_dtx_cfg[dtx_cnt] == END_SIGN) &&
- (default_mdio_cfg[mdio_cnt] == END_SIGN)) {
- break;
- } else {
- goto dtx_cfg;
}
}
@@ -748,12 +925,20 @@ static int init_nic(struct s2io_nic *nic)
val64 |= BIT(0); /* To enable the FIFO partition. */
writeq(val64, &bar0->tx_fifo_partition_0);
+ /*
+ * Disable 4 PCCs for Xena1, 2 and 3 as per H/W bug
+ * SXE-008 TRANSMIT DMA ARBITRATION ISSUE.
+ */
+ if ((nic->device_type == XFRAME_I_DEVICE) &&
+ (get_xena_rev_id(nic->pdev) < 4))
+ writeq(PCC_ENABLE_FOUR, &bar0->pcc_enable);
+
val64 = readq(&bar0->tx_fifo_partition_0);
DBG_PRINT(INIT_DBG, "Fifo partition at: 0x%p is: 0x%llx\n",
&bar0->tx_fifo_partition_0, (unsigned long long) val64);
- /*
- * Initialization of Tx_PA_CONFIG register to ignore packet
+ /*
+ * Initialization of Tx_PA_CONFIG register to ignore packet
* integrity checking.
*/
val64 = readq(&bar0->tx_pa_cfg);
@@ -770,85 +955,304 @@ static int init_nic(struct s2io_nic *nic)
}
writeq(val64, &bar0->rx_queue_priority);
- /*
- * Allocating equal share of memory to all the
+ /*
+ * Allocating equal share of memory to all the
* configured Rings.
*/
val64 = 0;
+ if (nic->device_type & XFRAME_II_DEVICE)
+ mem_size = 32;
+ else
+ mem_size = 64;
+
for (i = 0; i < config->rx_ring_num; i++) {
switch (i) {
case 0:
- mem_share = (64 / config->rx_ring_num +
- 64 % config->rx_ring_num);
+ mem_share = (mem_size / config->rx_ring_num +
+ mem_size % config->rx_ring_num);
val64 |= RX_QUEUE_CFG_Q0_SZ(mem_share);
continue;
case 1:
- mem_share = (64 / config->rx_ring_num);
+ mem_share = (mem_size / config->rx_ring_num);
val64 |= RX_QUEUE_CFG_Q1_SZ(mem_share);
continue;
case 2:
- mem_share = (64 / config->rx_ring_num);
+ mem_share = (mem_size / config->rx_ring_num);
val64 |= RX_QUEUE_CFG_Q2_SZ(mem_share);
continue;
case 3:
- mem_share = (64 / config->rx_ring_num);
+ mem_share = (mem_size / config->rx_ring_num);
val64 |= RX_QUEUE_CFG_Q3_SZ(mem_share);
continue;
case 4:
- mem_share = (64 / config->rx_ring_num);
+ mem_share = (mem_size / config->rx_ring_num);
val64 |= RX_QUEUE_CFG_Q4_SZ(mem_share);
continue;
case 5:
- mem_share = (64 / config->rx_ring_num);
+ mem_share = (mem_size / config->rx_ring_num);
val64 |= RX_QUEUE_CFG_Q5_SZ(mem_share);
continue;
case 6:
- mem_share = (64 / config->rx_ring_num);
+ mem_share = (mem_size / config->rx_ring_num);
val64 |= RX_QUEUE_CFG_Q6_SZ(mem_share);
continue;
case 7:
- mem_share = (64 / config->rx_ring_num);
+ mem_share = (mem_size / config->rx_ring_num);
val64 |= RX_QUEUE_CFG_Q7_SZ(mem_share);
continue;
}
}
writeq(val64, &bar0->rx_queue_cfg);
- /*
- * Initializing the Tx round robin registers to 0.
- * Filling Tx and Rx round robin registers as per the
- * number of FIFOs and Rings is still TODO.
- */
- writeq(0, &bar0->tx_w_round_robin_0);
- writeq(0, &bar0->tx_w_round_robin_1);
- writeq(0, &bar0->tx_w_round_robin_2);
- writeq(0, &bar0->tx_w_round_robin_3);
- writeq(0, &bar0->tx_w_round_robin_4);
-
- /*
- * TODO
- * Disable Rx steering. Hard coding all packets be steered to
- * Queue 0 for now.
+ /*
+ * Filling Tx round robin registers
+ * as per the number of FIFOs
*/
- val64 = 0x8080808080808080ULL;
- writeq(val64, &bar0->rts_qos_steering);
+ switch (config->tx_fifo_num) {
+ case 1:
+ val64 = 0x0000000000000000ULL;
+ writeq(val64, &bar0->tx_w_round_robin_0);
+ writeq(val64, &bar0->tx_w_round_robin_1);
+ writeq(val64, &bar0->tx_w_round_robin_2);
+ writeq(val64, &bar0->tx_w_round_robin_3);
+ writeq(val64, &bar0->tx_w_round_robin_4);
+ break;
+ case 2:
+ val64 = 0x0000010000010000ULL;
+ writeq(val64, &bar0->tx_w_round_robin_0);
+ val64 = 0x0100000100000100ULL;
+ writeq(val64, &bar0->tx_w_round_robin_1);
+ val64 = 0x0001000001000001ULL;
+ writeq(val64, &bar0->tx_w_round_robin_2);
+ val64 = 0x0000010000010000ULL;
+ writeq(val64, &bar0->tx_w_round_robin_3);
+ val64 = 0x0100000000000000ULL;
+ writeq(val64, &bar0->tx_w_round_robin_4);
+ break;
+ case 3:
+ val64 = 0x0001000102000001ULL;
+ writeq(val64, &bar0->tx_w_round_robin_0);
+ val64 = 0x0001020000010001ULL;
+ writeq(val64, &bar0->tx_w_round_robin_1);
+ val64 = 0x0200000100010200ULL;
+ writeq(val64, &bar0->tx_w_round_robin_2);
+ val64 = 0x0001000102000001ULL;
+ writeq(val64, &bar0->tx_w_round_robin_3);
+ val64 = 0x0001020000000000ULL;
+ writeq(val64, &bar0->tx_w_round_robin_4);
+ break;
+ case 4:
+ val64 = 0x0001020300010200ULL;
+ writeq(val64, &bar0->tx_w_round_robin_0);
+ val64 = 0x0100000102030001ULL;
+ writeq(val64, &bar0->tx_w_round_robin_1);
+ val64 = 0x0200010000010203ULL;
+ writeq(val64, &bar0->tx_w_round_robin_2);
+ val64 = 0x0001020001000001ULL;
+ writeq(val64, &bar0->tx_w_round_robin_3);
+ val64 = 0x0203000100000000ULL;
+ writeq(val64, &bar0->tx_w_round_robin_4);
+ break;
+ case 5:
+ val64 = 0x0001000203000102ULL;
+ writeq(val64, &bar0->tx_w_round_robin_0);
+ val64 = 0x0001020001030004ULL;
+ writeq(val64, &bar0->tx_w_round_robin_1);
+ val64 = 0x0001000203000102ULL;
+ writeq(val64, &bar0->tx_w_round_robin_2);
+ val64 = 0x0001020001030004ULL;
+ writeq(val64, &bar0->tx_w_round_robin_3);
+ val64 = 0x0001000000000000ULL;
+ writeq(val64, &bar0->tx_w_round_robin_4);
+ break;
+ case 6:
+ val64 = 0x0001020304000102ULL;
+ writeq(val64, &bar0->tx_w_round_robin_0);
+ val64 = 0x0304050001020001ULL;
+ writeq(val64, &bar0->tx_w_round_robin_1);
+ val64 = 0x0203000100000102ULL;
+ writeq(val64, &bar0->tx_w_round_robin_2);
+ val64 = 0x0304000102030405ULL;
+ writeq(val64, &bar0->tx_w_round_robin_3);
+ val64 = 0x0001000200000000ULL;
+ writeq(val64, &bar0->tx_w_round_robin_4);
+ break;
+ case 7:
+ val64 = 0x0001020001020300ULL;
+ writeq(val64, &bar0->tx_w_round_robin_0);
+ val64 = 0x0102030400010203ULL;
+ writeq(val64, &bar0->tx_w_round_robin_1);
+ val64 = 0x0405060001020001ULL;
+ writeq(val64, &bar0->tx_w_round_robin_2);
+ val64 = 0x0304050000010200ULL;
+ writeq(val64, &bar0->tx_w_round_robin_3);
+ val64 = 0x0102030000000000ULL;
+ writeq(val64, &bar0->tx_w_round_robin_4);
+ break;
+ case 8:
+ val64 = 0x0001020300040105ULL;
+ writeq(val64, &bar0->tx_w_round_robin_0);
+ val64 = 0x0200030106000204ULL;
+ writeq(val64, &bar0->tx_w_round_robin_1);
+ val64 = 0x0103000502010007ULL;
+ writeq(val64, &bar0->tx_w_round_robin_2);
+ val64 = 0x0304010002060500ULL;
+ writeq(val64, &bar0->tx_w_round_robin_3);
+ val64 = 0x0103020400000000ULL;
+ writeq(val64, &bar0->tx_w_round_robin_4);
+ break;
+ }
+
+ /* Filling the Rx round robin registers as per the
+ * number of Rings and steering based on QoS.
+ */
+ switch (config->rx_ring_num) {
+ case 1:
+ val64 = 0x8080808080808080ULL;
+ writeq(val64, &bar0->rts_qos_steering);
+ break;
+ case 2:
+ val64 = 0x0000010000010000ULL;
+ writeq(val64, &bar0->rx_w_round_robin_0);
+ val64 = 0x0100000100000100ULL;
+ writeq(val64, &bar0->rx_w_round_robin_1);
+ val64 = 0x0001000001000001ULL;
+ writeq(val64, &bar0->rx_w_round_robin_2);
+ val64 = 0x0000010000010000ULL;
+ writeq(val64, &bar0->rx_w_round_robin_3);
+ val64 = 0x0100000000000000ULL;
+ writeq(val64, &bar0->rx_w_round_robin_4);
+
+ val64 = 0x8080808040404040ULL;
+ writeq(val64, &bar0->rts_qos_steering);
+ break;
+ case 3:
+ val64 = 0x0001000102000001ULL;
+ writeq(val64, &bar0->rx_w_round_robin_0);
+ val64 = 0x0001020000010001ULL;
+ writeq(val64, &bar0->rx_w_round_robin_1);
+ val64 = 0x0200000100010200ULL;
+ writeq(val64, &bar0->rx_w_round_robin_2);
+ val64 = 0x0001000102000001ULL;
+ writeq(val64, &bar0->rx_w_round_robin_3);
+ val64 = 0x0001020000000000ULL;
+ writeq(val64, &bar0->rx_w_round_robin_4);
+
+ val64 = 0x8080804040402020ULL;
+ writeq(val64, &bar0->rts_qos_steering);
+ break;
+ case 4:
+ val64 = 0x0001020300010200ULL;
+ writeq(val64, &bar0->rx_w_round_robin_0);
+ val64 = 0x0100000102030001ULL;
+ writeq(val64, &bar0->rx_w_round_robin_1);
+ val64 = 0x0200010000010203ULL;
+ writeq(val64, &bar0->rx_w_round_robin_2);
+ val64 = 0x0001020001000001ULL;
+ writeq(val64, &bar0->rx_w_round_robin_3);
+ val64 = 0x0203000100000000ULL;
+ writeq(val64, &bar0->rx_w_round_robin_4);
+
+ val64 = 0x8080404020201010ULL;
+ writeq(val64, &bar0->rts_qos_steering);
+ break;
+ case 5:
+ val64 = 0x0001000203000102ULL;
+ writeq(val64, &bar0->rx_w_round_robin_0);
+ val64 = 0x0001020001030004ULL;
+ writeq(val64, &bar0->rx_w_round_robin_1);
+ val64 = 0x0001000203000102ULL;
+ writeq(val64, &bar0->rx_w_round_robin_2);
+ val64 = 0x0001020001030004ULL;
+ writeq(val64, &bar0->rx_w_round_robin_3);
+ val64 = 0x0001000000000000ULL;
+ writeq(val64, &bar0->rx_w_round_robin_4);
+
+ val64 = 0x8080404020201008ULL;
+ writeq(val64, &bar0->rts_qos_steering);
+ break;
+ case 6:
+ val64 = 0x0001020304000102ULL;
+ writeq(val64, &bar0->rx_w_round_robin_0);
+ val64 = 0x0304050001020001ULL;
+ writeq(val64, &bar0->rx_w_round_robin_1);
+ val64 = 0x0203000100000102ULL;
+ writeq(val64, &bar0->rx_w_round_robin_2);
+ val64 = 0x0304000102030405ULL;
+ writeq(val64, &bar0->rx_w_round_robin_3);
+ val64 = 0x0001000200000000ULL;
+ writeq(val64, &bar0->rx_w_round_robin_4);
+
+ val64 = 0x8080404020100804ULL;
+ writeq(val64, &bar0->rts_qos_steering);
+ break;
+ case 7:
+ val64 = 0x0001020001020300ULL;
+ writeq(val64, &bar0->rx_w_round_robin_0);
+ val64 = 0x0102030400010203ULL;
+ writeq(val64, &bar0->rx_w_round_robin_1);
+ val64 = 0x0405060001020001ULL;
+ writeq(val64, &bar0->rx_w_round_robin_2);
+ val64 = 0x0304050000010200ULL;
+ writeq(val64, &bar0->rx_w_round_robin_3);
+ val64 = 0x0102030000000000ULL;
+ writeq(val64, &bar0->rx_w_round_robin_4);
+
+ val64 = 0x8080402010080402ULL;
+ writeq(val64, &bar0->rts_qos_steering);
+ break;
+ case 8:
+ val64 = 0x0001020300040105ULL;
+ writeq(val64, &bar0->rx_w_round_robin_0);
+ val64 = 0x0200030106000204ULL;
+ writeq(val64, &bar0->rx_w_round_robin_1);
+ val64 = 0x0103000502010007ULL;
+ writeq(val64, &bar0->rx_w_round_robin_2);
+ val64 = 0x0304010002060500ULL;
+ writeq(val64, &bar0->rx_w_round_robin_3);
+ val64 = 0x0103020400000000ULL;
+ writeq(val64, &bar0->rx_w_round_robin_4);
+
+ val64 = 0x8040201008040201ULL;
+ writeq(val64, &bar0->rts_qos_steering);
+ break;
+ }
/* UDP Fix */
val64 = 0;
- for (i = 1; i < 8; i++)
+ for (i = 0; i < 8; i++)
+ writeq(val64, &bar0->rts_frm_len_n[i]);
+
+ /* Set the default rts frame length for the rings configured */
+ val64 = MAC_RTS_FRM_LEN_SET(dev->mtu+22);
+ for (i = 0 ; i < config->rx_ring_num ; i++)
writeq(val64, &bar0->rts_frm_len_n[i]);
- /* Set rts_frm_len register for fifo 0 */
- writeq(MAC_RTS_FRM_LEN_SET(dev->mtu + 22),
- &bar0->rts_frm_len_n[0]);
+ /* Set the frame length for the configured rings
+ * desired by the user
+ */
+ for (i = 0; i < config->rx_ring_num; i++) {
+ /* If rts_frm_len[i] == 0 then it is assumed that user not
+ * specified frame length steering.
+ * If the user provides the frame length then program
+ * the rts_frm_len register for those values or else
+ * leave it as it is.
+ */
+ if (rts_frm_len[i] != 0) {
+ writeq(MAC_RTS_FRM_LEN_SET(rts_frm_len[i]),
+ &bar0->rts_frm_len_n[i]);
+ }
+ }
- /* Enable statistics */
+ /* Program statistics memory */
writeq(mac_control->stats_mem_phy, &bar0->stat_addr);
- val64 = SET_UPDT_PERIOD(Stats_refresh_time) |
- STAT_CFG_STAT_RO | STAT_CFG_STAT_EN;
- writeq(val64, &bar0->stat_cfg);
- /*
+ if (nic->device_type == XFRAME_II_DEVICE) {
+ val64 = STAT_BC(0x320);
+ writeq(val64, &bar0->stat_byte_cnt);
+ }
+
+ /*
* Initializing the sampling rate for the device to calculate the
* bandwidth utilization.
*/
@@ -857,30 +1261,38 @@ static int init_nic(struct s2io_nic *nic)
writeq(val64, &bar0->mac_link_util);
- /*
- * Initializing the Transmit and Receive Traffic Interrupt
+ /*
+ * Initializing the Transmit and Receive Traffic Interrupt
* Scheme.
*/
- /* TTI Initialization. Default Tx timer gets us about
+ /*
+ * TTI Initialization. Default Tx timer gets us about
* 250 interrupts per sec. Continuous interrupts are enabled
* by default.
*/
- val64 = TTI_DATA1_MEM_TX_TIMER_VAL(0x2078) |
- TTI_DATA1_MEM_TX_URNG_A(0xA) |
+ if (nic->device_type == XFRAME_II_DEVICE) {
+ int count = (nic->config.bus_speed * 125)/2;
+ val64 = TTI_DATA1_MEM_TX_TIMER_VAL(count);
+ } else {
+
+ val64 = TTI_DATA1_MEM_TX_TIMER_VAL(0x2078);
+ }
+ val64 |= TTI_DATA1_MEM_TX_URNG_A(0xA) |
TTI_DATA1_MEM_TX_URNG_B(0x10) |
- TTI_DATA1_MEM_TX_URNG_C(0x30) | TTI_DATA1_MEM_TX_TIMER_AC_EN |
- TTI_DATA1_MEM_TX_TIMER_CI_EN;
+ TTI_DATA1_MEM_TX_URNG_C(0x30) | TTI_DATA1_MEM_TX_TIMER_AC_EN;
+ if (use_continuous_tx_intrs)
+ val64 |= TTI_DATA1_MEM_TX_TIMER_CI_EN;
writeq(val64, &bar0->tti_data1_mem);
val64 = TTI_DATA2_MEM_TX_UFC_A(0x10) |
TTI_DATA2_MEM_TX_UFC_B(0x20) |
- TTI_DATA2_MEM_TX_UFC_C(0x40) | TTI_DATA2_MEM_TX_UFC_D(0x80);
+ TTI_DATA2_MEM_TX_UFC_C(0x70) | TTI_DATA2_MEM_TX_UFC_D(0x80);
writeq(val64, &bar0->tti_data2_mem);
val64 = TTI_CMD_MEM_WE | TTI_CMD_MEM_STROBE_NEW_CMD;
writeq(val64, &bar0->tti_command_mem);
- /*
+ /*
* Once the operation completes, the Strobe bit of the command
* register will be reset. We poll for this particular condition
* We wait for a maximum of 500ms for the operation to complete,
@@ -901,52 +1313,97 @@ static int init_nic(struct s2io_nic *nic)
time++;
}
- /* RTI Initialization */
- val64 = RTI_DATA1_MEM_RX_TIMER_VAL(0xFFF) |
- RTI_DATA1_MEM_RX_URNG_A(0xA) |
- RTI_DATA1_MEM_RX_URNG_B(0x10) |
- RTI_DATA1_MEM_RX_URNG_C(0x30) | RTI_DATA1_MEM_RX_TIMER_AC_EN;
+ if (nic->config.bimodal) {
+ int k = 0;
+ for (k = 0; k < config->rx_ring_num; k++) {
+ val64 = TTI_CMD_MEM_WE | TTI_CMD_MEM_STROBE_NEW_CMD;
+ val64 |= TTI_CMD_MEM_OFFSET(0x38+k);
+ writeq(val64, &bar0->tti_command_mem);
+
+ /*
+ * Once the operation completes, the Strobe bit of the command
+ * register will be reset. We poll for this particular condition
+ * We wait for a maximum of 500ms for the operation to complete,
+ * if it's not complete by then we return error.
+ */
+ time = 0;
+ while (TRUE) {
+ val64 = readq(&bar0->tti_command_mem);
+ if (!(val64 & TTI_CMD_MEM_STROBE_NEW_CMD)) {
+ break;
+ }
+ if (time > 10) {
+ DBG_PRINT(ERR_DBG,
+ "%s: TTI init Failed\n",
+ dev->name);
+ return -1;
+ }
+ time++;
+ msleep(50);
+ }
+ }
+ } else {
- writeq(val64, &bar0->rti_data1_mem);
+ /* RTI Initialization */
+ if (nic->device_type == XFRAME_II_DEVICE) {
+ /*
+ * Programmed to generate Apprx 500 Intrs per
+ * second
+ */
+ int count = (nic->config.bus_speed * 125)/4;
+ val64 = RTI_DATA1_MEM_RX_TIMER_VAL(count);
+ } else {
+ val64 = RTI_DATA1_MEM_RX_TIMER_VAL(0xFFF);
+ }
+ val64 |= RTI_DATA1_MEM_RX_URNG_A(0xA) |
+ RTI_DATA1_MEM_RX_URNG_B(0x10) |
+ RTI_DATA1_MEM_RX_URNG_C(0x30) | RTI_DATA1_MEM_RX_TIMER_AC_EN;
- val64 = RTI_DATA2_MEM_RX_UFC_A(0x1) |
- RTI_DATA2_MEM_RX_UFC_B(0x2) |
- RTI_DATA2_MEM_RX_UFC_C(0x40) | RTI_DATA2_MEM_RX_UFC_D(0x80);
- writeq(val64, &bar0->rti_data2_mem);
+ writeq(val64, &bar0->rti_data1_mem);
- val64 = RTI_CMD_MEM_WE | RTI_CMD_MEM_STROBE_NEW_CMD;
- writeq(val64, &bar0->rti_command_mem);
+ val64 = RTI_DATA2_MEM_RX_UFC_A(0x1) |
+ RTI_DATA2_MEM_RX_UFC_B(0x2) |
+ RTI_DATA2_MEM_RX_UFC_C(0x40) | RTI_DATA2_MEM_RX_UFC_D(0x80);
+ writeq(val64, &bar0->rti_data2_mem);
- /*
- * Once the operation completes, the Strobe bit of the command
- * register will be reset. We poll for this particular condition
- * We wait for a maximum of 500ms for the operation to complete,
- * if it's not complete by then we return error.
- */
- time = 0;
- while (TRUE) {
- val64 = readq(&bar0->rti_command_mem);
- if (!(val64 & TTI_CMD_MEM_STROBE_NEW_CMD)) {
- break;
- }
- if (time > 10) {
- DBG_PRINT(ERR_DBG, "%s: RTI init Failed\n",
- dev->name);
- return -1;
+ for (i = 0; i < config->rx_ring_num; i++) {
+ val64 = RTI_CMD_MEM_WE | RTI_CMD_MEM_STROBE_NEW_CMD
+ | RTI_CMD_MEM_OFFSET(i);
+ writeq(val64, &bar0->rti_command_mem);
+
+ /*
+ * Once the operation completes, the Strobe bit of the
+ * command register will be reset. We poll for this
+ * particular condition. We wait for a maximum of 500ms
+ * for the operation to complete, if it's not complete
+ * by then we return error.
+ */
+ time = 0;
+ while (TRUE) {
+ val64 = readq(&bar0->rti_command_mem);
+ if (!(val64 & RTI_CMD_MEM_STROBE_NEW_CMD)) {
+ break;
+ }
+ if (time > 10) {
+ DBG_PRINT(ERR_DBG, "%s: RTI init Failed\n",
+ dev->name);
+ return -1;
+ }
+ time++;
+ msleep(50);
+ }
}
- time++;
- msleep(50);
}
- /*
- * Initializing proper values as Pause threshold into all
+ /*
+ * Initializing proper values as Pause threshold into all
* the 8 Queues on Rx side.
*/
writeq(0xffbbffbbffbbffbbULL, &bar0->mc_pause_thresh_q0q3);
writeq(0xffbbffbbffbbffbbULL, &bar0->mc_pause_thresh_q4q7);
/* Disable RMAC PAD STRIPPING */
- add = &bar0->mac_cfg;
+ add = (void *) &bar0->mac_cfg;
val64 = readq(&bar0->mac_cfg);
val64 &= ~(MAC_CFG_RMAC_STRIP_PAD);
writeq(RMAC_CFG_KEY(0x4C0D), &bar0->rmac_cfg_key);
@@ -955,8 +1412,8 @@ static int init_nic(struct s2io_nic *nic)
writel((u32) (val64 >> 32), (add + 4));
val64 = readq(&bar0->mac_cfg);
- /*
- * Set the time value to be inserted in the pause frame
+ /*
+ * Set the time value to be inserted in the pause frame
* generated by xena.
*/
val64 = readq(&bar0->rmac_pause_cfg);
@@ -964,7 +1421,7 @@ static int init_nic(struct s2io_nic *nic)
val64 |= RMAC_PAUSE_HG_PTIME(nic->mac_control.rmac_pause_time);
writeq(val64, &bar0->rmac_pause_cfg);
- /*
+ /*
* Set the Threshold Limit for Generating the pause frame
* If the amount of data in any Queue exceeds ratio of
* (mac_control.mc_pause_threshold_q0q3 or q4q7)/256
@@ -988,25 +1445,54 @@ static int init_nic(struct s2io_nic *nic)
}
writeq(val64, &bar0->mc_pause_thresh_q4q7);
- /*
- * TxDMA will stop Read request if the number of read split has
+ /*
+ * TxDMA will stop Read request if the number of read split has
* exceeded the limit pointed by shared_splits
*/
val64 = readq(&bar0->pic_control);
val64 |= PIC_CNTL_SHARED_SPLITS(shared_splits);
writeq(val64, &bar0->pic_control);
+ /*
+ * Programming the Herc to split every write transaction
+ * that does not start on an ADB to reduce disconnects.
+ */
+ if (nic->device_type == XFRAME_II_DEVICE) {
+ val64 = WREQ_SPLIT_MASK_SET_MASK(255);
+ writeq(val64, &bar0->wreq_split_mask);
+ }
+
+ /* Setting Link stability period to 64 ms */
+ if (nic->device_type == XFRAME_II_DEVICE) {
+ val64 = MISC_LINK_STABILITY_PRD(3);
+ writeq(val64, &bar0->misc_control);
+ }
+
return SUCCESS;
}
+#define LINK_UP_DOWN_INTERRUPT 1
+#define MAC_RMAC_ERR_TIMER 2
-/**
- * en_dis_able_nic_intrs - Enable or Disable the interrupts
+#if defined(CONFIG_MSI_MODE) || defined(CONFIG_MSIX_MODE)
+#define s2io_link_fault_indication(x) MAC_RMAC_ERR_TIMER
+#else
+int s2io_link_fault_indication(nic_t *nic)
+{
+ if (nic->device_type == XFRAME_II_DEVICE)
+ return LINK_UP_DOWN_INTERRUPT;
+ else
+ return MAC_RMAC_ERR_TIMER;
+}
+#endif
+
+/**
+ * en_dis_able_nic_intrs - Enable or Disable the interrupts
* @nic: device private variable,
* @mask: A mask indicating which Intr block must be modified and,
* @flag: A flag indicating whether to enable or disable the Intrs.
* Description: This function will either disable or enable the interrupts
- * depending on the flag argument. The mask argument can be used to
- * enable/disable any Intr block.
+ * depending on the flag argument. The mask argument can be used to
+ * enable/disable any Intr block.
* Return Value: NONE.
*/
@@ -1024,20 +1510,31 @@ static void en_dis_able_nic_intrs(struct s2io_nic *nic, u16 mask, int flag)
temp64 = readq(&bar0->general_int_mask);
temp64 &= ~((u64) val64);
writeq(temp64, &bar0->general_int_mask);
- /*
- * Disabled all PCIX, Flash, MDIO, IIC and GPIO
- * interrupts for now.
- * TODO
+ /*
+ * If Hercules adapter enable GPIO otherwise
+ * disabled all PCIX, Flash, MDIO, IIC and GPIO
+ * interrupts for now.
+ * TODO
*/
- writeq(DISABLE_ALL_INTRS, &bar0->pic_int_mask);
- /*
+ if (s2io_link_fault_indication(nic) ==
+ LINK_UP_DOWN_INTERRUPT ) {
+ temp64 = readq(&bar0->pic_int_mask);
+ temp64 &= ~((u64) PIC_INT_GPIO);
+ writeq(temp64, &bar0->pic_int_mask);
+ temp64 = readq(&bar0->gpio_int_mask);
+ temp64 &= ~((u64) GPIO_INT_MASK_LINK_UP);
+ writeq(temp64, &bar0->gpio_int_mask);
+ } else {
+ writeq(DISABLE_ALL_INTRS, &bar0->pic_int_mask);
+ }
+ /*
* No MSI Support is available presently, so TTI and
* RTI interrupts are also disabled.
*/
} else if (flag == DISABLE_INTRS) {
- /*
- * Disable PIC Intrs in the general
- * intr mask register
+ /*
+ * Disable PIC Intrs in the general
+ * intr mask register
*/
writeq(DISABLE_ALL_INTRS, &bar0->pic_int_mask);
temp64 = readq(&bar0->general_int_mask);
@@ -1055,27 +1552,27 @@ static void en_dis_able_nic_intrs(struct s2io_nic *nic, u16 mask, int flag)
temp64 = readq(&bar0->general_int_mask);
temp64 &= ~((u64) val64);
writeq(temp64, &bar0->general_int_mask);
- /*
- * Keep all interrupts other than PFC interrupt
+ /*
+ * Keep all interrupts other than PFC interrupt
* and PCC interrupt disabled in DMA level.
*/
val64 = DISABLE_ALL_INTRS & ~(TXDMA_PFC_INT_M |
TXDMA_PCC_INT_M);
writeq(val64, &bar0->txdma_int_mask);
- /*
- * Enable only the MISC error 1 interrupt in PFC block
+ /*
+ * Enable only the MISC error 1 interrupt in PFC block
*/
val64 = DISABLE_ALL_INTRS & (~PFC_MISC_ERR_1);
writeq(val64, &bar0->pfc_err_mask);
- /*
- * Enable only the FB_ECC error interrupt in PCC block
+ /*
+ * Enable only the FB_ECC error interrupt in PCC block
*/
val64 = DISABLE_ALL_INTRS & (~PCC_FB_ECC_ERR);
writeq(val64, &bar0->pcc_err_mask);
} else if (flag == DISABLE_INTRS) {
- /*
- * Disable TxDMA Intrs in the general intr mask
- * register
+ /*
+ * Disable TxDMA Intrs in the general intr mask
+ * register
*/
writeq(DISABLE_ALL_INTRS, &bar0->txdma_int_mask);
writeq(DISABLE_ALL_INTRS, &bar0->pfc_err_mask);
@@ -1093,15 +1590,15 @@ static void en_dis_able_nic_intrs(struct s2io_nic *nic, u16 mask, int flag)
temp64 = readq(&bar0->general_int_mask);
temp64 &= ~((u64) val64);
writeq(temp64, &bar0->general_int_mask);
- /*
- * All RxDMA block interrupts are disabled for now
- * TODO
+ /*
+ * All RxDMA block interrupts are disabled for now
+ * TODO
*/
writeq(DISABLE_ALL_INTRS, &bar0->rxdma_int_mask);
} else if (flag == DISABLE_INTRS) {
- /*
- * Disable RxDMA Intrs in the general intr mask
- * register
+ /*
+ * Disable RxDMA Intrs in the general intr mask
+ * register
*/
writeq(DISABLE_ALL_INTRS, &bar0->rxdma_int_mask);
temp64 = readq(&bar0->general_int_mask);
@@ -1118,22 +1615,13 @@ static void en_dis_able_nic_intrs(struct s2io_nic *nic, u16 mask, int flag)
temp64 = readq(&bar0->general_int_mask);
temp64 &= ~((u64) val64);
writeq(temp64, &bar0->general_int_mask);
- /*
- * All MAC block error interrupts are disabled for now
- * except the link status change interrupt.
+ /*
+ * All MAC block error interrupts are disabled for now
* TODO
*/
- val64 = MAC_INT_STATUS_RMAC_INT;
- temp64 = readq(&bar0->mac_int_mask);
- temp64 &= ~((u64) val64);
- writeq(temp64, &bar0->mac_int_mask);
-
- val64 = readq(&bar0->mac_rmac_err_mask);
- val64 &= ~((u64) RMAC_LINK_STATE_CHANGE_INT);
- writeq(val64, &bar0->mac_rmac_err_mask);
} else if (flag == DISABLE_INTRS) {
- /*
- * Disable MAC Intrs in the general intr mask register
+ /*
+ * Disable MAC Intrs in the general intr mask register
*/
writeq(DISABLE_ALL_INTRS, &bar0->mac_int_mask);
writeq(DISABLE_ALL_INTRS,
@@ -1152,14 +1640,14 @@ static void en_dis_able_nic_intrs(struct s2io_nic *nic, u16 mask, int flag)
temp64 = readq(&bar0->general_int_mask);
temp64 &= ~((u64) val64);
writeq(temp64, &bar0->general_int_mask);
- /*
+ /*
* All XGXS block error interrupts are disabled for now
- * TODO
+ * TODO
*/
writeq(DISABLE_ALL_INTRS, &bar0->xgxs_int_mask);
} else if (flag == DISABLE_INTRS) {
- /*
- * Disable MC Intrs in the general intr mask register
+ /*
+ * Disable MC Intrs in the general intr mask register
*/
writeq(DISABLE_ALL_INTRS, &bar0->xgxs_int_mask);
temp64 = readq(&bar0->general_int_mask);
@@ -1175,11 +1663,11 @@ static void en_dis_able_nic_intrs(struct s2io_nic *nic, u16 mask, int flag)
temp64 = readq(&bar0->general_int_mask);
temp64 &= ~((u64) val64);
writeq(temp64, &bar0->general_int_mask);
- /*
- * All MC block error interrupts are disabled for now
- * TODO
+ /*
+ * Enable all MC Intrs.
*/
- writeq(DISABLE_ALL_INTRS, &bar0->mc_int_mask);
+ writeq(0x0, &bar0->mc_int_mask);
+ writeq(0x0, &bar0->mc_err_mask);
} else if (flag == DISABLE_INTRS) {
/*
* Disable MC Intrs in the general intr mask register
@@ -1199,14 +1687,14 @@ static void en_dis_able_nic_intrs(struct s2io_nic *nic, u16 mask, int flag)
temp64 = readq(&bar0->general_int_mask);
temp64 &= ~((u64) val64);
writeq(temp64, &bar0->general_int_mask);
- /*
+ /*
* Enable all the Tx side interrupts
- * writing 0 Enables all 64 TX interrupt levels
+ * writing 0 Enables all 64 TX interrupt levels
*/
writeq(0x0, &bar0->tx_traffic_mask);
} else if (flag == DISABLE_INTRS) {
- /*
- * Disable Tx Traffic Intrs in the general intr mask
+ /*
+ * Disable Tx Traffic Intrs in the general intr mask
* register.
*/
writeq(DISABLE_ALL_INTRS, &bar0->tx_traffic_mask);
@@ -1226,8 +1714,8 @@ static void en_dis_able_nic_intrs(struct s2io_nic *nic, u16 mask, int flag)
/* writing 0 Enables all 8 RX interrupt levels */
writeq(0x0, &bar0->rx_traffic_mask);
} else if (flag == DISABLE_INTRS) {
- /*
- * Disable Rx Traffic Intrs in the general intr mask
+ /*
+ * Disable Rx Traffic Intrs in the general intr mask
* register.
*/
writeq(DISABLE_ALL_INTRS, &bar0->rx_traffic_mask);
@@ -1238,24 +1726,66 @@ static void en_dis_able_nic_intrs(struct s2io_nic *nic, u16 mask, int flag)
}
}
-/**
- * verify_xena_quiescence - Checks whether the H/W is ready
+static int check_prc_pcc_state(u64 val64, int flag, int rev_id, int herc)
+{
+ int ret = 0;
+
+ if (flag == FALSE) {
+ if ((!herc && (rev_id >= 4)) || herc) {
+ if (!(val64 & ADAPTER_STATUS_RMAC_PCC_IDLE) &&
+ ((val64 & ADAPTER_STATUS_RC_PRC_QUIESCENT) ==
+ ADAPTER_STATUS_RC_PRC_QUIESCENT)) {
+ ret = 1;
+ }
+ }else {
+ if (!(val64 & ADAPTER_STATUS_RMAC_PCC_FOUR_IDLE) &&
+ ((val64 & ADAPTER_STATUS_RC_PRC_QUIESCENT) ==
+ ADAPTER_STATUS_RC_PRC_QUIESCENT)) {
+ ret = 1;
+ }
+ }
+ } else {
+ if ((!herc && (rev_id >= 4)) || herc) {
+ if (((val64 & ADAPTER_STATUS_RMAC_PCC_IDLE) ==
+ ADAPTER_STATUS_RMAC_PCC_IDLE) &&
+ (!(val64 & ADAPTER_STATUS_RC_PRC_QUIESCENT) ||
+ ((val64 & ADAPTER_STATUS_RC_PRC_QUIESCENT) ==
+ ADAPTER_STATUS_RC_PRC_QUIESCENT))) {
+ ret = 1;
+ }
+ } else {
+ if (((val64 & ADAPTER_STATUS_RMAC_PCC_FOUR_IDLE) ==
+ ADAPTER_STATUS_RMAC_PCC_FOUR_IDLE) &&
+ (!(val64 & ADAPTER_STATUS_RC_PRC_QUIESCENT) ||
+ ((val64 & ADAPTER_STATUS_RC_PRC_QUIESCENT) ==
+ ADAPTER_STATUS_RC_PRC_QUIESCENT))) {
+ ret = 1;
+ }
+ }
+ }
+
+ return ret;
+}
+/**
+ * verify_xena_quiescence - Checks whether the H/W is ready
* @val64 : Value read from adapter status register.
* @flag : indicates if the adapter enable bit was ever written once
* before.
* Description: Returns whether the H/W is ready to go or not. Depending
- * on whether adapter enable bit was written or not the comparison
+ * on whether adapter enable bit was written or not the comparison
* differs and the calling function passes the input argument flag to
* indicate this.
- * Return: 1 If xena is quiescence
+ * Return: 1 If xena is quiescence
* 0 If Xena is not quiescence
*/
-static int verify_xena_quiescence(u64 val64, int flag)
+static int verify_xena_quiescence(nic_t *sp, u64 val64, int flag)
{
- int ret = 0;
+ int ret = 0, herc;
u64 tmp64 = ~((u64) val64);
+ int rev_id = get_xena_rev_id(sp->pdev);
+ herc = (sp->device_type == XFRAME_II_DEVICE);
if (!
(tmp64 &
(ADAPTER_STATUS_TDMA_READY | ADAPTER_STATUS_RDMA_READY |
@@ -1263,25 +1793,7 @@ static int verify_xena_quiescence(u64 val64, int flag)
ADAPTER_STATUS_PIC_QUIESCENT | ADAPTER_STATUS_MC_DRAM_READY |
ADAPTER_STATUS_MC_QUEUES_READY | ADAPTER_STATUS_M_PLL_LOCK |
ADAPTER_STATUS_P_PLL_LOCK))) {
- if (flag == FALSE) {
- if (!(val64 & ADAPTER_STATUS_RMAC_PCC_IDLE) &&
- ((val64 & ADAPTER_STATUS_RC_PRC_QUIESCENT) ==
- ADAPTER_STATUS_RC_PRC_QUIESCENT)) {
-
- ret = 1;
-
- }
- } else {
- if (((val64 & ADAPTER_STATUS_RMAC_PCC_IDLE) ==
- ADAPTER_STATUS_RMAC_PCC_IDLE) &&
- (!(val64 & ADAPTER_STATUS_RC_PRC_QUIESCENT) ||
- ((val64 & ADAPTER_STATUS_RC_PRC_QUIESCENT) ==
- ADAPTER_STATUS_RC_PRC_QUIESCENT))) {
-
- ret = 1;
-
- }
- }
+ ret = check_prc_pcc_state(val64, flag, rev_id, herc);
}
return ret;
@@ -1290,12 +1802,12 @@ static int verify_xena_quiescence(u64 val64, int flag)
/**
* fix_mac_address - Fix for Mac addr problem on Alpha platforms
* @sp: Pointer to device specifc structure
- * Description :
+ * Description :
* New procedure to clear mac address reading problems on Alpha platforms
*
*/
-static void fix_mac_address(nic_t * sp)
+void fix_mac_address(nic_t * sp)
{
XENA_dev_config_t __iomem *bar0 = sp->bar0;
u64 val64;
@@ -1303,20 +1815,21 @@ static void fix_mac_address(nic_t * sp)
while (fix_mac[i] != END_SIGN) {
writeq(fix_mac[i++], &bar0->gpio_control);
+ udelay(10);
val64 = readq(&bar0->gpio_control);
}
}
/**
- * start_nic - Turns the device on
+ * start_nic - Turns the device on
* @nic : device private variable.
- * Description:
- * This function actually turns the device on. Before this function is
- * called,all Registers are configured from their reset states
- * and shared memory is allocated but the NIC is still quiescent. On
+ * Description:
+ * This function actually turns the device on. Before this function is
+ * called,all Registers are configured from their reset states
+ * and shared memory is allocated but the NIC is still quiescent. On
* calling this function, the device interrupts are cleared and the NIC is
* literally switched on by writing into the adapter control register.
- * Return Value:
+ * Return Value:
* SUCCESS on success and -1 on failure.
*/
@@ -1325,8 +1838,8 @@ static int start_nic(struct s2io_nic *nic)
XENA_dev_config_t __iomem *bar0 = nic->bar0;
struct net_device *dev = nic->dev;
register u64 val64 = 0;
- u16 interruptible, i;
- u16 subid;
+ u16 interruptible;
+ u16 subid, i;
mac_info_t *mac_control;
struct config_param *config;
@@ -1335,10 +1848,12 @@ static int start_nic(struct s2io_nic *nic)
/* PRC Initialization and configuration */
for (i = 0; i < config->rx_ring_num; i++) {
- writeq((u64) nic->rx_blocks[i][0].block_dma_addr,
+ writeq((u64) mac_control->rings[i].rx_blocks[0].block_dma_addr,
&bar0->prc_rxd0_n[i]);
val64 = readq(&bar0->prc_ctrl_n[i]);
+ if (nic->config.bimodal)
+ val64 |= PRC_CTRL_BIMODAL_INTERRUPT;
#ifndef CONFIG_2BUFF_MODE
val64 |= PRC_CTRL_RC_ENABLED;
#else
@@ -1354,7 +1869,7 @@ static int start_nic(struct s2io_nic *nic)
writeq(val64, &bar0->rx_pa_cfg);
#endif
- /*
+ /*
* Enabling MC-RLDRAM. After enabling the device, we timeout
* for around 100ms, which is approximately the time required
* for the device to be ready for operation.
@@ -1364,27 +1879,27 @@ static int start_nic(struct s2io_nic *nic)
SPECIAL_REG_WRITE(val64, &bar0->mc_rldram_mrs, UF);
val64 = readq(&bar0->mc_rldram_mrs);
- msleep(100); /* Delay by around 100 ms. */
+ msleep(100); /* Delay by around 100 ms. */
/* Enabling ECC Protection. */
val64 = readq(&bar0->adapter_control);
val64 &= ~ADAPTER_ECC_EN;
writeq(val64, &bar0->adapter_control);
- /*
- * Clearing any possible Link state change interrupts that
+ /*
+ * Clearing any possible Link state change interrupts that
* could have popped up just before Enabling the card.
*/
val64 = readq(&bar0->mac_rmac_err_reg);
if (val64)
writeq(val64, &bar0->mac_rmac_err_reg);
- /*
- * Verify if the device is ready to be enabled, if so enable
+ /*
+ * Verify if the device is ready to be enabled, if so enable
* it.
*/
val64 = readq(&bar0->adapter_status);
- if (!verify_xena_quiescence(val64, nic->device_enabled_once)) {
+ if (!verify_xena_quiescence(nic, val64, nic->device_enabled_once)) {
DBG_PRINT(ERR_DBG, "%s: device is not ready, ", dev->name);
DBG_PRINT(ERR_DBG, "Adapter status reads: 0x%llx\n",
(unsigned long long) val64);
@@ -1392,16 +1907,18 @@ static int start_nic(struct s2io_nic *nic)
}
/* Enable select interrupts */
- interruptible = TX_TRAFFIC_INTR | RX_TRAFFIC_INTR | TX_MAC_INTR |
- RX_MAC_INTR;
+ interruptible = TX_TRAFFIC_INTR | RX_TRAFFIC_INTR;
+ interruptible |= TX_PIC_INTR | RX_PIC_INTR;
+ interruptible |= TX_MAC_INTR | RX_MAC_INTR;
+
en_dis_able_nic_intrs(nic, interruptible, ENABLE_INTRS);
- /*
+ /*
* With some switches, link might be already up at this point.
- * Because of this weird behavior, when we enable laser,
- * we may not get link. We need to handle this. We cannot
- * figure out which switch is misbehaving. So we are forced to
- * make a global change.
+ * Because of this weird behavior, when we enable laser,
+ * we may not get link. We need to handle this. We cannot
+ * figure out which switch is misbehaving. So we are forced to
+ * make a global change.
*/
/* Enabling Laser. */
@@ -1411,44 +1928,30 @@ static int start_nic(struct s2io_nic *nic)
/* SXE-002: Initialize link and activity LED */
subid = nic->pdev->subsystem_device;
- if ((subid & 0xFF) >= 0x07) {
+ if (((subid & 0xFF) >= 0x07) &&
+ (nic->device_type == XFRAME_I_DEVICE)) {
val64 = readq(&bar0->gpio_control);
val64 |= 0x0000800000000000ULL;
writeq(val64, &bar0->gpio_control);
val64 = 0x0411040400000000ULL;
- writeq(val64, (void __iomem *) bar0 + 0x2700);
+ writeq(val64, (void __iomem *) ((u8 *) bar0 + 0x2700));
}
- /*
- * Don't see link state interrupts on certain switches, so
+ /*
+ * Don't see link state interrupts on certain switches, so
* directly scheduling a link state task from here.
*/
schedule_work(&nic->set_link_task);
- /*
- * Here we are performing soft reset on XGXS to
- * force link down. Since link is already up, we will get
- * link state change interrupt after this reset
- */
- SPECIAL_REG_WRITE(0x80010515001E0000ULL, &bar0->dtx_control, UF);
- val64 = readq(&bar0->dtx_control);
- udelay(50);
- SPECIAL_REG_WRITE(0x80010515001E00E0ULL, &bar0->dtx_control, UF);
- val64 = readq(&bar0->dtx_control);
- udelay(50);
- SPECIAL_REG_WRITE(0x80070515001F00E4ULL, &bar0->dtx_control, UF);
- val64 = readq(&bar0->dtx_control);
- udelay(50);
-
return SUCCESS;
}
-/**
- * free_tx_buffers - Free all queued Tx buffers
+/**
+ * free_tx_buffers - Free all queued Tx buffers
* @nic : device private variable.
- * Description:
+ * Description:
* Free all queued Tx buffers.
- * Return Value: void
+ * Return Value: void
*/
static void free_tx_buffers(struct s2io_nic *nic)
@@ -1459,39 +1962,61 @@ static void free_tx_buffers(struct s2io_nic *nic)
int i, j;
mac_info_t *mac_control;
struct config_param *config;
- int cnt = 0;
+ int cnt = 0, frg_cnt;
mac_control = &nic->mac_control;
config = &nic->config;
for (i = 0; i < config->tx_fifo_num; i++) {
for (j = 0; j < config->tx_cfg[i].fifo_len - 1; j++) {
- txdp = (TxD_t *) nic->list_info[i][j].
+ txdp = (TxD_t *) mac_control->fifos[i].list_info[j].
list_virt_addr;
skb =
(struct sk_buff *) ((unsigned long) txdp->
Host_Control);
if (skb == NULL) {
- memset(txdp, 0, sizeof(TxD_t));
+ memset(txdp, 0, sizeof(TxD_t) *
+ config->max_txds);
continue;
}
+ frg_cnt = skb_shinfo(skb)->nr_frags;
+ pci_unmap_single(nic->pdev, (dma_addr_t)
+ txdp->Buffer_Pointer,
+ skb->len - skb->data_len,
+ PCI_DMA_TODEVICE);
+ if (frg_cnt) {
+ TxD_t *temp;
+ temp = txdp;
+ txdp++;
+ for (j = 0; j < frg_cnt; j++, txdp++) {
+ skb_frag_t *frag =
+ &skb_shinfo(skb)->frags[j];
+ pci_unmap_page(nic->pdev,
+ (dma_addr_t)
+ txdp->
+ Buffer_Pointer,
+ frag->size,
+ PCI_DMA_TODEVICE);
+ }
+ txdp = temp;
+ }
dev_kfree_skb(skb);
- memset(txdp, 0, sizeof(TxD_t));
+ memset(txdp, 0, sizeof(TxD_t) * config->max_txds);
cnt++;
}
DBG_PRINT(INTR_DBG,
"%s:forcibly freeing %d skbs on FIFO%d\n",
dev->name, cnt, i);
- mac_control->tx_curr_get_info[i].offset = 0;
- mac_control->tx_curr_put_info[i].offset = 0;
+ mac_control->fifos[i].tx_curr_get_info.offset = 0;
+ mac_control->fifos[i].tx_curr_put_info.offset = 0;
}
}
-/**
- * stop_nic - To stop the nic
+/**
+ * stop_nic - To stop the nic
* @nic ; device private variable.
- * Description:
- * This function does exactly the opposite of what the start_nic()
+ * Description:
+ * This function does exactly the opposite of what the start_nic()
* function does. This function is called to stop the device.
* Return Value:
* void.
@@ -1509,8 +2034,9 @@ static void stop_nic(struct s2io_nic *nic)
config = &nic->config;
/* Disable all interrupts */
- interruptible = TX_TRAFFIC_INTR | RX_TRAFFIC_INTR | TX_MAC_INTR |
- RX_MAC_INTR;
+ interruptible = TX_TRAFFIC_INTR | RX_TRAFFIC_INTR;
+ interruptible |= TX_PIC_INTR | RX_PIC_INTR;
+ interruptible |= TX_MAC_INTR | RX_MAC_INTR;
en_dis_able_nic_intrs(nic, interruptible, DISABLE_INTRS);
/* Disable PRCs */
@@ -1521,11 +2047,11 @@ static void stop_nic(struct s2io_nic *nic)
}
}
-/**
- * fill_rx_buffers - Allocates the Rx side skbs
+/**
+ * fill_rx_buffers - Allocates the Rx side skbs
* @nic: device private variable
- * @ring_no: ring number
- * Description:
+ * @ring_no: ring number
+ * Description:
* The function allocates Rx side skbs and puts the physical
* address of these buffers into the RxD buffer pointers, so that the NIC
* can DMA the received frame into these locations.
@@ -1533,8 +2059,8 @@ static void stop_nic(struct s2io_nic *nic)
* 1. single buffer,
* 2. three buffer and
* 3. Five buffer modes.
- * Each mode defines how many fragments the received frame will be split
- * up into by the NIC. The frame is split into L3 header, L4 Header,
+ * Each mode defines how many fragments the received frame will be split
+ * up into by the NIC. The frame is split into L3 header, L4 Header,
* L4 payload in three buffer mode and in 5 buffer mode, L4 payload itself
* is split into 3 fragments. As of now only single buffer mode is
* supported.
@@ -1542,7 +2068,7 @@ static void stop_nic(struct s2io_nic *nic)
* SUCCESS on success or an appropriate -ve value on failure.
*/
-static int fill_rx_buffers(struct s2io_nic *nic, int ring_no)
+int fill_rx_buffers(struct s2io_nic *nic, int ring_no)
{
struct net_device *dev = nic->dev;
struct sk_buff *skb;
@@ -1550,34 +2076,35 @@ static int fill_rx_buffers(struct s2io_nic *nic, int ring_no)
int off, off1, size, block_no, block_no1;
int offset, offset1;
u32 alloc_tab = 0;
- u32 alloc_cnt = nic->pkt_cnt[ring_no] -
- atomic_read(&nic->rx_bufs_left[ring_no]);
+ u32 alloc_cnt;
mac_info_t *mac_control;
struct config_param *config;
#ifdef CONFIG_2BUFF_MODE
RxD_t *rxdpnext;
int nextblk;
- unsigned long tmp;
+ u64 tmp;
buffAdd_t *ba;
dma_addr_t rxdpphys;
#endif
#ifndef CONFIG_S2IO_NAPI
unsigned long flags;
#endif
+ RxD_t *first_rxdp = NULL;
mac_control = &nic->mac_control;
config = &nic->config;
-
+ alloc_cnt = mac_control->rings[ring_no].pkt_cnt -
+ atomic_read(&nic->rx_bufs_left[ring_no]);
size = dev->mtu + HEADER_ETHERNET_II_802_3_SIZE +
HEADER_802_2_SIZE + HEADER_SNAP_SIZE;
while (alloc_tab < alloc_cnt) {
- block_no = mac_control->rx_curr_put_info[ring_no].
+ block_no = mac_control->rings[ring_no].rx_curr_put_info.
block_index;
- block_no1 = mac_control->rx_curr_get_info[ring_no].
+ block_no1 = mac_control->rings[ring_no].rx_curr_get_info.
block_index;
- off = mac_control->rx_curr_put_info[ring_no].offset;
- off1 = mac_control->rx_curr_get_info[ring_no].offset;
+ off = mac_control->rings[ring_no].rx_curr_put_info.offset;
+ off1 = mac_control->rings[ring_no].rx_curr_get_info.offset;
#ifndef CONFIG_2BUFF_MODE
offset = block_no * (MAX_RXDS_PER_BLOCK + 1) + off;
offset1 = block_no1 * (MAX_RXDS_PER_BLOCK + 1) + off1;
@@ -1586,7 +2113,7 @@ static int fill_rx_buffers(struct s2io_nic *nic, int ring_no)
offset1 = block_no1 * (MAX_RXDS_PER_BLOCK) + off1;
#endif
- rxdp = nic->rx_blocks[ring_no][block_no].
+ rxdp = mac_control->rings[ring_no].rx_blocks[block_no].
block_virt_addr + off;
if ((offset == offset1) && (rxdp->Host_Control)) {
DBG_PRINT(INTR_DBG, "%s: Get and Put", dev->name);
@@ -1595,15 +2122,15 @@ static int fill_rx_buffers(struct s2io_nic *nic, int ring_no)
}
#ifndef CONFIG_2BUFF_MODE
if (rxdp->Control_1 == END_OF_BLOCK) {
- mac_control->rx_curr_put_info[ring_no].
+ mac_control->rings[ring_no].rx_curr_put_info.
block_index++;
- mac_control->rx_curr_put_info[ring_no].
- block_index %= nic->block_count[ring_no];
- block_no = mac_control->rx_curr_put_info
- [ring_no].block_index;
+ mac_control->rings[ring_no].rx_curr_put_info.
+ block_index %= mac_control->rings[ring_no].block_count;
+ block_no = mac_control->rings[ring_no].rx_curr_put_info.
+ block_index;
off++;
off %= (MAX_RXDS_PER_BLOCK + 1);
- mac_control->rx_curr_put_info[ring_no].offset =
+ mac_control->rings[ring_no].rx_curr_put_info.offset =
off;
rxdp = (RxD_t *) ((unsigned long) rxdp->Control_2);
DBG_PRINT(INTR_DBG, "%s: Next block at: %p\n",
@@ -1611,30 +2138,30 @@ static int fill_rx_buffers(struct s2io_nic *nic, int ring_no)
}
#ifndef CONFIG_S2IO_NAPI
spin_lock_irqsave(&nic->put_lock, flags);
- nic->put_pos[ring_no] =
+ mac_control->rings[ring_no].put_pos =
(block_no * (MAX_RXDS_PER_BLOCK + 1)) + off;
spin_unlock_irqrestore(&nic->put_lock, flags);
#endif
#else
if (rxdp->Host_Control == END_OF_BLOCK) {
- mac_control->rx_curr_put_info[ring_no].
+ mac_control->rings[ring_no].rx_curr_put_info.
block_index++;
- mac_control->rx_curr_put_info[ring_no].
- block_index %= nic->block_count[ring_no];
- block_no = mac_control->rx_curr_put_info
- [ring_no].block_index;
+ mac_control->rings[ring_no].rx_curr_put_info.block_index
+ %= mac_control->rings[ring_no].block_count;
+ block_no = mac_control->rings[ring_no].rx_curr_put_info
+ .block_index;
off = 0;
DBG_PRINT(INTR_DBG, "%s: block%d at: 0x%llx\n",
dev->name, block_no,
(unsigned long long) rxdp->Control_1);
- mac_control->rx_curr_put_info[ring_no].offset =
+ mac_control->rings[ring_no].rx_curr_put_info.offset =
off;
- rxdp = nic->rx_blocks[ring_no][block_no].
+ rxdp = mac_control->rings[ring_no].rx_blocks[block_no].
block_virt_addr;
}
#ifndef CONFIG_S2IO_NAPI
spin_lock_irqsave(&nic->put_lock, flags);
- nic->put_pos[ring_no] = (block_no *
+ mac_control->rings[ring_no].put_pos = (block_no *
(MAX_RXDS_PER_BLOCK + 1)) + off;
spin_unlock_irqrestore(&nic->put_lock, flags);
#endif
@@ -1646,27 +2173,27 @@ static int fill_rx_buffers(struct s2io_nic *nic, int ring_no)
if (rxdp->Control_2 & BIT(0))
#endif
{
- mac_control->rx_curr_put_info[ring_no].
+ mac_control->rings[ring_no].rx_curr_put_info.
offset = off;
goto end;
}
#ifdef CONFIG_2BUFF_MODE
- /*
- * RxDs Spanning cache lines will be replenished only
- * if the succeeding RxD is also owned by Host. It
- * will always be the ((8*i)+3) and ((8*i)+6)
- * descriptors for the 48 byte descriptor. The offending
+ /*
+ * RxDs Spanning cache lines will be replenished only
+ * if the succeeding RxD is also owned by Host. It
+ * will always be the ((8*i)+3) and ((8*i)+6)
+ * descriptors for the 48 byte descriptor. The offending
* decsriptor is of-course the 3rd descriptor.
*/
- rxdpphys = nic->rx_blocks[ring_no][block_no].
+ rxdpphys = mac_control->rings[ring_no].rx_blocks[block_no].
block_dma_addr + (off * sizeof(RxD_t));
if (((u64) (rxdpphys)) % 128 > 80) {
- rxdpnext = nic->rx_blocks[ring_no][block_no].
+ rxdpnext = mac_control->rings[ring_no].rx_blocks[block_no].
block_virt_addr + (off + 1);
if (rxdpnext->Host_Control == END_OF_BLOCK) {
nextblk = (block_no + 1) %
- (nic->block_count[ring_no]);
- rxdpnext = nic->rx_blocks[ring_no]
+ (mac_control->rings[ring_no].block_count);
+ rxdpnext = mac_control->rings[ring_no].rx_blocks
[nextblk].block_virt_addr;
}
if (rxdpnext->Control_2 & BIT(0))
@@ -1682,6 +2209,10 @@ static int fill_rx_buffers(struct s2io_nic *nic, int ring_no)
if (!skb) {
DBG_PRINT(ERR_DBG, "%s: Out of ", dev->name);
DBG_PRINT(ERR_DBG, "memory to allocate SKBs\n");
+ if (first_rxdp) {
+ wmb();
+ first_rxdp->Control_1 |= RXD_OWN_XENA;
+ }
return -ENOMEM;
}
#ifndef CONFIG_2BUFF_MODE
@@ -1692,12 +2223,13 @@ static int fill_rx_buffers(struct s2io_nic *nic, int ring_no)
rxdp->Control_2 &= (~MASK_BUFFER0_SIZE);
rxdp->Control_2 |= SET_BUFFER0_SIZE(size);
rxdp->Host_Control = (unsigned long) (skb);
- rxdp->Control_1 |= RXD_OWN_XENA;
+ if (alloc_tab & ((1 << rxsync_frequency) - 1))
+ rxdp->Control_1 |= RXD_OWN_XENA;
off++;
off %= (MAX_RXDS_PER_BLOCK + 1);
- mac_control->rx_curr_put_info[ring_no].offset = off;
+ mac_control->rings[ring_no].rx_curr_put_info.offset = off;
#else
- ba = &nic->ba[ring_no][block_no][off];
+ ba = &mac_control->rings[ring_no].ba[block_no][off];
skb_reserve(skb, BUF0_LEN);
tmp = ((unsigned long) skb->data & ALIGN_SIZE);
if (tmp)
@@ -1719,22 +2251,41 @@ static int fill_rx_buffers(struct s2io_nic *nic, int ring_no)
rxdp->Control_2 |= SET_BUFFER1_SIZE(1); /* dummy. */
rxdp->Control_2 |= BIT(0); /* Set Buffer_Empty bit. */
rxdp->Host_Control = (u64) ((unsigned long) (skb));
- rxdp->Control_1 |= RXD_OWN_XENA;
+ if (alloc_tab & ((1 << rxsync_frequency) - 1))
+ rxdp->Control_1 |= RXD_OWN_XENA;
off++;
- mac_control->rx_curr_put_info[ring_no].offset = off;
+ mac_control->rings[ring_no].rx_curr_put_info.offset = off;
#endif
+ rxdp->Control_2 |= SET_RXD_MARKER;
+
+ if (!(alloc_tab & ((1 << rxsync_frequency) - 1))) {
+ if (first_rxdp) {
+ wmb();
+ first_rxdp->Control_1 |= RXD_OWN_XENA;
+ }
+ first_rxdp = rxdp;
+ }
atomic_inc(&nic->rx_bufs_left[ring_no]);
alloc_tab++;
}
end:
+ /* Transfer ownership of first descriptor to adapter just before
+ * exiting. Before that, use memory barrier so that ownership
+ * and other fields are seen by adapter correctly.
+ */
+ if (first_rxdp) {
+ wmb();
+ first_rxdp->Control_1 |= RXD_OWN_XENA;
+ }
+
return SUCCESS;
}
/**
- * free_rx_buffers - Frees all Rx buffers
+ * free_rx_buffers - Frees all Rx buffers
* @sp: device private variable.
- * Description:
+ * Description:
* This function will free all Rx buffers allocated by host.
* Return Value:
* NONE.
@@ -1758,7 +2309,8 @@ static void free_rx_buffers(struct s2io_nic *sp)
for (i = 0; i < config->rx_ring_num; i++) {
for (j = 0, blk = 0; j < config->rx_cfg[i].num_rxd; j++) {
off = j % (MAX_RXDS_PER_BLOCK + 1);
- rxdp = sp->rx_blocks[i][blk].block_virt_addr + off;
+ rxdp = mac_control->rings[i].rx_blocks[blk].
+ block_virt_addr + off;
#ifndef CONFIG_2BUFF_MODE
if (rxdp->Control_1 == END_OF_BLOCK) {
@@ -1793,7 +2345,7 @@ static void free_rx_buffers(struct s2io_nic *sp)
HEADER_SNAP_SIZE,
PCI_DMA_FROMDEVICE);
#else
- ba = &sp->ba[i][blk][off];
+ ba = &mac_control->rings[i].ba[blk][off];
pci_unmap_single(sp->pdev, (dma_addr_t)
rxdp->Buffer0_ptr,
BUF0_LEN,
@@ -1813,10 +2365,10 @@ static void free_rx_buffers(struct s2io_nic *sp)
}
memset(rxdp, 0, sizeof(RxD_t));
}
- mac_control->rx_curr_put_info[i].block_index = 0;
- mac_control->rx_curr_get_info[i].block_index = 0;
- mac_control->rx_curr_put_info[i].offset = 0;
- mac_control->rx_curr_get_info[i].offset = 0;
+ mac_control->rings[i].rx_curr_put_info.block_index = 0;
+ mac_control->rings[i].rx_curr_get_info.block_index = 0;
+ mac_control->rings[i].rx_curr_put_info.offset = 0;
+ mac_control->rings[i].rx_curr_get_info.offset = 0;
atomic_set(&sp->rx_bufs_left[i], 0);
DBG_PRINT(INIT_DBG, "%s:Freed 0x%x Rx Buffers on ring%d\n",
dev->name, buf_cnt, i);
@@ -1826,7 +2378,7 @@ static void free_rx_buffers(struct s2io_nic *sp)
/**
* s2io_poll - Rx interrupt handler for NAPI support
* @dev : pointer to the device structure.
- * @budget : The number of packets that were budgeted to be processed
+ * @budget : The number of packets that were budgeted to be processed
* during one pass through the 'Poll" function.
* Description:
* Comes into picture only if NAPI support has been incorporated. It does
@@ -1836,160 +2388,36 @@ static void free_rx_buffers(struct s2io_nic *sp)
* 0 on success and 1 if there are No Rx packets to be processed.
*/
-#ifdef CONFIG_S2IO_NAPI
+#if defined(CONFIG_S2IO_NAPI)
static int s2io_poll(struct net_device *dev, int *budget)
{
nic_t *nic = dev->priv;
- XENA_dev_config_t __iomem *bar0 = nic->bar0;
- int pkts_to_process = *budget, pkt_cnt = 0;
- register u64 val64 = 0;
- rx_curr_get_info_t get_info, put_info;
- int i, get_block, put_block, get_offset, put_offset, ring_bufs;
-#ifndef CONFIG_2BUFF_MODE
- u16 val16, cksum;
-#endif
- struct sk_buff *skb;
- RxD_t *rxdp;
+ int pkt_cnt = 0, org_pkts_to_process;
mac_info_t *mac_control;
struct config_param *config;
-#ifdef CONFIG_2BUFF_MODE
- buffAdd_t *ba;
-#endif
+ XENA_dev_config_t *bar0 = (XENA_dev_config_t *) nic->bar0;
+ u64 val64;
+ int i;
+ atomic_inc(&nic->isr_cnt);
mac_control = &nic->mac_control;
config = &nic->config;
- if (pkts_to_process > dev->quota)
- pkts_to_process = dev->quota;
+ nic->pkts_to_process = *budget;
+ if (nic->pkts_to_process > dev->quota)
+ nic->pkts_to_process = dev->quota;
+ org_pkts_to_process = nic->pkts_to_process;
val64 = readq(&bar0->rx_traffic_int);
writeq(val64, &bar0->rx_traffic_int);
for (i = 0; i < config->rx_ring_num; i++) {
- get_info = mac_control->rx_curr_get_info[i];
- get_block = get_info.block_index;
- put_info = mac_control->rx_curr_put_info[i];
- put_block = put_info.block_index;
- ring_bufs = config->rx_cfg[i].num_rxd;
- rxdp = nic->rx_blocks[i][get_block].block_virt_addr +
- get_info.offset;
-#ifndef CONFIG_2BUFF_MODE
- get_offset = (get_block * (MAX_RXDS_PER_BLOCK + 1)) +
- get_info.offset;
- put_offset = (put_block * (MAX_RXDS_PER_BLOCK + 1)) +
- put_info.offset;
- while ((!(rxdp->Control_1 & RXD_OWN_XENA)) &&
- (((get_offset + 1) % ring_bufs) != put_offset)) {
- if (--pkts_to_process < 0) {
- goto no_rx;
- }
- if (rxdp->Control_1 == END_OF_BLOCK) {
- rxdp =
- (RxD_t *) ((unsigned long) rxdp->
- Control_2);
- get_info.offset++;
- get_info.offset %=
- (MAX_RXDS_PER_BLOCK + 1);
- get_block++;
- get_block %= nic->block_count[i];
- mac_control->rx_curr_get_info[i].
- offset = get_info.offset;
- mac_control->rx_curr_get_info[i].
- block_index = get_block;
- continue;
- }
- get_offset =
- (get_block * (MAX_RXDS_PER_BLOCK + 1)) +
- get_info.offset;
- skb =
- (struct sk_buff *) ((unsigned long) rxdp->
- Host_Control);
- if (skb == NULL) {
- DBG_PRINT(ERR_DBG, "%s: The skb is ",
- dev->name);
- DBG_PRINT(ERR_DBG, "Null in Rx Intr\n");
- goto no_rx;
- }
- val64 = RXD_GET_BUFFER0_SIZE(rxdp->Control_2);
- val16 = (u16) (val64 >> 48);
- cksum = RXD_GET_L4_CKSUM(rxdp->Control_1);
- pci_unmap_single(nic->pdev, (dma_addr_t)
- rxdp->Buffer0_ptr,
- dev->mtu +
- HEADER_ETHERNET_II_802_3_SIZE +
- HEADER_802_2_SIZE +
- HEADER_SNAP_SIZE,
- PCI_DMA_FROMDEVICE);
- rx_osm_handler(nic, val16, rxdp, i);
- pkt_cnt++;
- get_info.offset++;
- get_info.offset %= (MAX_RXDS_PER_BLOCK + 1);
- rxdp =
- nic->rx_blocks[i][get_block].block_virt_addr +
- get_info.offset;
- mac_control->rx_curr_get_info[i].offset =
- get_info.offset;
+ rx_intr_handler(&mac_control->rings[i]);
+ pkt_cnt = org_pkts_to_process - nic->pkts_to_process;
+ if (!nic->pkts_to_process) {
+ /* Quota for the current iteration has been met */
+ goto no_rx;
}
-#else
- get_offset = (get_block * (MAX_RXDS_PER_BLOCK + 1)) +
- get_info.offset;
- put_offset = (put_block * (MAX_RXDS_PER_BLOCK + 1)) +
- put_info.offset;
- while (((!(rxdp->Control_1 & RXD_OWN_XENA)) &&
- !(rxdp->Control_2 & BIT(0))) &&
- (((get_offset + 1) % ring_bufs) != put_offset)) {
- if (--pkts_to_process < 0) {
- goto no_rx;
- }
- skb = (struct sk_buff *) ((unsigned long)
- rxdp->Host_Control);
- if (skb == NULL) {
- DBG_PRINT(ERR_DBG, "%s: The skb is ",
- dev->name);
- DBG_PRINT(ERR_DBG, "Null in Rx Intr\n");
- goto no_rx;
- }
-
- pci_unmap_single(nic->pdev, (dma_addr_t)
- rxdp->Buffer0_ptr,
- BUF0_LEN, PCI_DMA_FROMDEVICE);
- pci_unmap_single(nic->pdev, (dma_addr_t)
- rxdp->Buffer1_ptr,
- BUF1_LEN, PCI_DMA_FROMDEVICE);
- pci_unmap_single(nic->pdev, (dma_addr_t)
- rxdp->Buffer2_ptr,
- dev->mtu + BUF0_LEN + 4,
- PCI_DMA_FROMDEVICE);
- ba = &nic->ba[i][get_block][get_info.offset];
-
- rx_osm_handler(nic, rxdp, i, ba);
-
- get_info.offset++;
- mac_control->rx_curr_get_info[i].offset =
- get_info.offset;
- rxdp =
- nic->rx_blocks[i][get_block].block_virt_addr +
- get_info.offset;
-
- if (get_info.offset &&
- (!(get_info.offset % MAX_RXDS_PER_BLOCK))) {
- get_info.offset = 0;
- mac_control->rx_curr_get_info[i].
- offset = get_info.offset;
- get_block++;
- get_block %= nic->block_count[i];
- mac_control->rx_curr_get_info[i].
- block_index = get_block;
- rxdp =
- nic->rx_blocks[i][get_block].
- block_virt_addr;
- }
- get_offset =
- (get_block * (MAX_RXDS_PER_BLOCK + 1)) +
- get_info.offset;
- pkt_cnt++;
- }
-#endif
}
if (!pkt_cnt)
pkt_cnt = 1;
@@ -2007,9 +2435,10 @@ static int s2io_poll(struct net_device *dev, int *budget)
}
/* Re enable the Rx interrupts. */
en_dis_able_nic_intrs(nic, RX_TRAFFIC_INTR, ENABLE_INTRS);
+ atomic_dec(&nic->isr_cnt);
return 0;
- no_rx:
+no_rx:
dev->quota -= pkt_cnt;
*budget -= pkt_cnt;
@@ -2020,279 +2449,204 @@ static int s2io_poll(struct net_device *dev, int *budget)
break;
}
}
+ atomic_dec(&nic->isr_cnt);
return 1;
}
-#else
-/**
+#endif
+
+/**
* rx_intr_handler - Rx interrupt handler
* @nic: device private variable.
- * Description:
- * If the interrupt is because of a received frame or if the
+ * Description:
+ * If the interrupt is because of a received frame or if the
* receive ring contains fresh as yet un-processed frames,this function is
- * called. It picks out the RxD at which place the last Rx processing had
- * stopped and sends the skb to the OSM's Rx handler and then increments
+ * called. It picks out the RxD at which place the last Rx processing had
+ * stopped and sends the skb to the OSM's Rx handler and then increments
* the offset.
* Return Value:
* NONE.
*/
-
-static void rx_intr_handler(struct s2io_nic *nic)
+static void rx_intr_handler(ring_info_t *ring_data)
{
+ nic_t *nic = ring_data->nic;
struct net_device *dev = (struct net_device *) nic->dev;
- XENA_dev_config_t *bar0 = (XENA_dev_config_t *) nic->bar0;
+ int get_block, get_offset, put_block, put_offset, ring_bufs;
rx_curr_get_info_t get_info, put_info;
RxD_t *rxdp;
struct sk_buff *skb;
-#ifndef CONFIG_2BUFF_MODE
- u16 val16, cksum;
-#endif
- register u64 val64 = 0;
- int get_block, get_offset, put_block, put_offset, ring_bufs;
- int i, pkt_cnt = 0;
- mac_info_t *mac_control;
- struct config_param *config;
-#ifdef CONFIG_2BUFF_MODE
- buffAdd_t *ba;
+#ifndef CONFIG_S2IO_NAPI
+ int pkt_cnt = 0;
#endif
+ spin_lock(&nic->rx_lock);
+ if (atomic_read(&nic->card_state) == CARD_DOWN) {
+ DBG_PRINT(ERR_DBG, "%s: %s going down for reset\n",
+ __FUNCTION__, dev->name);
+ spin_unlock(&nic->rx_lock);
+ }
- mac_control = &nic->mac_control;
- config = &nic->config;
-
- /*
- * rx_traffic_int reg is an R1 register, hence we read and write back
- * the samevalue in the register to clear it.
- */
- val64 = readq(&bar0->rx_traffic_int);
- writeq(val64, &bar0->rx_traffic_int);
-
- for (i = 0; i < config->rx_ring_num; i++) {
- get_info = mac_control->rx_curr_get_info[i];
- get_block = get_info.block_index;
- put_info = mac_control->rx_curr_put_info[i];
- put_block = put_info.block_index;
- ring_bufs = config->rx_cfg[i].num_rxd;
- rxdp = nic->rx_blocks[i][get_block].block_virt_addr +
- get_info.offset;
-#ifndef CONFIG_2BUFF_MODE
- get_offset = (get_block * (MAX_RXDS_PER_BLOCK + 1)) +
+ get_info = ring_data->rx_curr_get_info;
+ get_block = get_info.block_index;
+ put_info = ring_data->rx_curr_put_info;
+ put_block = put_info.block_index;
+ ring_bufs = get_info.ring_len+1;
+ rxdp = ring_data->rx_blocks[get_block].block_virt_addr +
get_info.offset;
- spin_lock(&nic->put_lock);
- put_offset = nic->put_pos[i];
- spin_unlock(&nic->put_lock);
- while ((!(rxdp->Control_1 & RXD_OWN_XENA)) &&
- (((get_offset + 1) % ring_bufs) != put_offset)) {
- if (rxdp->Control_1 == END_OF_BLOCK) {
- rxdp = (RxD_t *) ((unsigned long)
- rxdp->Control_2);
- get_info.offset++;
- get_info.offset %=
- (MAX_RXDS_PER_BLOCK + 1);
- get_block++;
- get_block %= nic->block_count[i];
- mac_control->rx_curr_get_info[i].
- offset = get_info.offset;
- mac_control->rx_curr_get_info[i].
- block_index = get_block;
- continue;
- }
- get_offset =
- (get_block * (MAX_RXDS_PER_BLOCK + 1)) +
- get_info.offset;
- skb = (struct sk_buff *) ((unsigned long)
- rxdp->Host_Control);
- if (skb == NULL) {
- DBG_PRINT(ERR_DBG, "%s: The skb is ",
- dev->name);
- DBG_PRINT(ERR_DBG, "Null in Rx Intr\n");
- return;
- }
- val64 = RXD_GET_BUFFER0_SIZE(rxdp->Control_2);
- val16 = (u16) (val64 >> 48);
- cksum = RXD_GET_L4_CKSUM(rxdp->Control_1);
- pci_unmap_single(nic->pdev, (dma_addr_t)
- rxdp->Buffer0_ptr,
- dev->mtu +
- HEADER_ETHERNET_II_802_3_SIZE +
- HEADER_802_2_SIZE +
- HEADER_SNAP_SIZE,
- PCI_DMA_FROMDEVICE);
- rx_osm_handler(nic, val16, rxdp, i);
- get_info.offset++;
- get_info.offset %= (MAX_RXDS_PER_BLOCK + 1);
- rxdp =
- nic->rx_blocks[i][get_block].block_virt_addr +
- get_info.offset;
- mac_control->rx_curr_get_info[i].offset =
- get_info.offset;
- pkt_cnt++;
- if ((indicate_max_pkts)
- && (pkt_cnt > indicate_max_pkts))
- break;
+ get_offset = (get_block * (MAX_RXDS_PER_BLOCK + 1)) +
+ get_info.offset;
+#ifndef CONFIG_S2IO_NAPI
+ spin_lock(&nic->put_lock);
+ put_offset = ring_data->put_pos;
+ spin_unlock(&nic->put_lock);
+#else
+ put_offset = (put_block * (MAX_RXDS_PER_BLOCK + 1)) +
+ put_info.offset;
+#endif
+ while (RXD_IS_UP2DT(rxdp) &&
+ (((get_offset + 1) % ring_bufs) != put_offset)) {
+ skb = (struct sk_buff *) ((unsigned long)rxdp->Host_Control);
+ if (skb == NULL) {
+ DBG_PRINT(ERR_DBG, "%s: The skb is ",
+ dev->name);
+ DBG_PRINT(ERR_DBG, "Null in Rx Intr\n");
+ spin_unlock(&nic->rx_lock);
+ return;
}
+#ifndef CONFIG_2BUFF_MODE
+ pci_unmap_single(nic->pdev, (dma_addr_t)
+ rxdp->Buffer0_ptr,
+ dev->mtu +
+ HEADER_ETHERNET_II_802_3_SIZE +
+ HEADER_802_2_SIZE +
+ HEADER_SNAP_SIZE,
+ PCI_DMA_FROMDEVICE);
#else
- get_offset = (get_block * (MAX_RXDS_PER_BLOCK + 1)) +
+ pci_unmap_single(nic->pdev, (dma_addr_t)
+ rxdp->Buffer0_ptr,
+ BUF0_LEN, PCI_DMA_FROMDEVICE);
+ pci_unmap_single(nic->pdev, (dma_addr_t)
+ rxdp->Buffer1_ptr,
+ BUF1_LEN, PCI_DMA_FROMDEVICE);
+ pci_unmap_single(nic->pdev, (dma_addr_t)
+ rxdp->Buffer2_ptr,
+ dev->mtu + BUF0_LEN + 4,
+ PCI_DMA_FROMDEVICE);
+#endif
+ rx_osm_handler(ring_data, rxdp);
+ get_info.offset++;
+ ring_data->rx_curr_get_info.offset =
get_info.offset;
- spin_lock(&nic->put_lock);
- put_offset = nic->put_pos[i];
- spin_unlock(&nic->put_lock);
- while (((!(rxdp->Control_1 & RXD_OWN_XENA)) &&
- !(rxdp->Control_2 & BIT(0))) &&
- (((get_offset + 1) % ring_bufs) != put_offset)) {
- skb = (struct sk_buff *) ((unsigned long)
- rxdp->Host_Control);
- if (skb == NULL) {
- DBG_PRINT(ERR_DBG, "%s: The skb is ",
- dev->name);
- DBG_PRINT(ERR_DBG, "Null in Rx Intr\n");
- return;
- }
-
- pci_unmap_single(nic->pdev, (dma_addr_t)
- rxdp->Buffer0_ptr,
- BUF0_LEN, PCI_DMA_FROMDEVICE);
- pci_unmap_single(nic->pdev, (dma_addr_t)
- rxdp->Buffer1_ptr,
- BUF1_LEN, PCI_DMA_FROMDEVICE);
- pci_unmap_single(nic->pdev, (dma_addr_t)
- rxdp->Buffer2_ptr,
- dev->mtu + BUF0_LEN + 4,
- PCI_DMA_FROMDEVICE);
- ba = &nic->ba[i][get_block][get_info.offset];
-
- rx_osm_handler(nic, rxdp, i, ba);
-
- get_info.offset++;
- mac_control->rx_curr_get_info[i].offset =
- get_info.offset;
- rxdp =
- nic->rx_blocks[i][get_block].block_virt_addr +
- get_info.offset;
+ rxdp = ring_data->rx_blocks[get_block].block_virt_addr +
+ get_info.offset;
+ if (get_info.offset &&
+ (!(get_info.offset % MAX_RXDS_PER_BLOCK))) {
+ get_info.offset = 0;
+ ring_data->rx_curr_get_info.offset
+ = get_info.offset;
+ get_block++;
+ get_block %= ring_data->block_count;
+ ring_data->rx_curr_get_info.block_index
+ = get_block;
+ rxdp = ring_data->rx_blocks[get_block].block_virt_addr;
+ }
- if (get_info.offset &&
- (!(get_info.offset % MAX_RXDS_PER_BLOCK))) {
- get_info.offset = 0;
- mac_control->rx_curr_get_info[i].
- offset = get_info.offset;
- get_block++;
- get_block %= nic->block_count[i];
- mac_control->rx_curr_get_info[i].
- block_index = get_block;
- rxdp =
- nic->rx_blocks[i][get_block].
- block_virt_addr;
- }
- get_offset =
- (get_block * (MAX_RXDS_PER_BLOCK + 1)) +
+ get_offset = (get_block * (MAX_RXDS_PER_BLOCK + 1)) +
get_info.offset;
- pkt_cnt++;
- if ((indicate_max_pkts)
- && (pkt_cnt > indicate_max_pkts))
- break;
- }
-#endif
+#ifdef CONFIG_S2IO_NAPI
+ nic->pkts_to_process -= 1;
+ if (!nic->pkts_to_process)
+ break;
+#else
+ pkt_cnt++;
if ((indicate_max_pkts) && (pkt_cnt > indicate_max_pkts))
break;
+#endif
}
+ spin_unlock(&nic->rx_lock);
}
-#endif
-/**
+
+/**
* tx_intr_handler - Transmit interrupt handler
* @nic : device private variable
- * Description:
- * If an interrupt was raised to indicate DMA complete of the
- * Tx packet, this function is called. It identifies the last TxD
- * whose buffer was freed and frees all skbs whose data have already
+ * Description:
+ * If an interrupt was raised to indicate DMA complete of the
+ * Tx packet, this function is called. It identifies the last TxD
+ * whose buffer was freed and frees all skbs whose data have already
* DMA'ed into the NICs internal memory.
* Return Value:
* NONE
*/
-static void tx_intr_handler(struct s2io_nic *nic)
+static void tx_intr_handler(fifo_info_t *fifo_data)
{
- XENA_dev_config_t __iomem *bar0 = nic->bar0;
+ nic_t *nic = fifo_data->nic;
struct net_device *dev = (struct net_device *) nic->dev;
tx_curr_get_info_t get_info, put_info;
struct sk_buff *skb;
TxD_t *txdlp;
- register u64 val64 = 0;
- int i;
u16 j, frg_cnt;
- mac_info_t *mac_control;
- struct config_param *config;
- mac_control = &nic->mac_control;
- config = &nic->config;
-
- /*
- * tx_traffic_int reg is an R1 register, hence we read and write
- * back the samevalue in the register to clear it.
- */
- val64 = readq(&bar0->tx_traffic_int);
- writeq(val64, &bar0->tx_traffic_int);
+ get_info = fifo_data->tx_curr_get_info;
+ put_info = fifo_data->tx_curr_put_info;
+ txdlp = (TxD_t *) fifo_data->list_info[get_info.offset].
+ list_virt_addr;
+ while ((!(txdlp->Control_1 & TXD_LIST_OWN_XENA)) &&
+ (get_info.offset != put_info.offset) &&
+ (txdlp->Host_Control)) {
+ /* Check for TxD errors */
+ if (txdlp->Control_1 & TXD_T_CODE) {
+ unsigned long long err;
+ err = txdlp->Control_1 & TXD_T_CODE;
+ DBG_PRINT(ERR_DBG, "***TxD error %llx\n",
+ err);
+ }
- for (i = 0; i < config->tx_fifo_num; i++) {
- get_info = mac_control->tx_curr_get_info[i];
- put_info = mac_control->tx_curr_put_info[i];
- txdlp = (TxD_t *) nic->list_info[i][get_info.offset].
- list_virt_addr;
- while ((!(txdlp->Control_1 & TXD_LIST_OWN_XENA)) &&
- (get_info.offset != put_info.offset) &&
- (txdlp->Host_Control)) {
- /* Check for TxD errors */
- if (txdlp->Control_1 & TXD_T_CODE) {
- unsigned long long err;
- err = txdlp->Control_1 & TXD_T_CODE;
- DBG_PRINT(ERR_DBG, "***TxD error %llx\n",
- err);
- }
+ skb = (struct sk_buff *) ((unsigned long)
+ txdlp->Host_Control);
+ if (skb == NULL) {
+ DBG_PRINT(ERR_DBG, "%s: Null skb ",
+ __FUNCTION__);
+ DBG_PRINT(ERR_DBG, "in Tx Free Intr\n");
+ return;
+ }
- skb = (struct sk_buff *) ((unsigned long)
- txdlp->Host_Control);
- if (skb == NULL) {
- DBG_PRINT(ERR_DBG, "%s: Null skb ",
- dev->name);
- DBG_PRINT(ERR_DBG, "in Tx Free Intr\n");
- return;
+ frg_cnt = skb_shinfo(skb)->nr_frags;
+ nic->tx_pkt_count++;
+
+ pci_unmap_single(nic->pdev, (dma_addr_t)
+ txdlp->Buffer_Pointer,
+ skb->len - skb->data_len,
+ PCI_DMA_TODEVICE);
+ if (frg_cnt) {
+ TxD_t *temp;
+ temp = txdlp;
+ txdlp++;
+ for (j = 0; j < frg_cnt; j++, txdlp++) {
+ skb_frag_t *frag =
+ &skb_shinfo(skb)->frags[j];
+ if (!txdlp->Buffer_Pointer)
+ break;
+ pci_unmap_page(nic->pdev,
+ (dma_addr_t)
+ txdlp->
+ Buffer_Pointer,
+ frag->size,
+ PCI_DMA_TODEVICE);
}
- nic->tx_pkt_count++;
-
- frg_cnt = skb_shinfo(skb)->nr_frags;
-
- /* For unfragmented skb */
- pci_unmap_single(nic->pdev, (dma_addr_t)
- txdlp->Buffer_Pointer,
- skb->len - skb->data_len,
- PCI_DMA_TODEVICE);
- if (frg_cnt) {
- TxD_t *temp = txdlp;
- txdlp++;
- for (j = 0; j < frg_cnt; j++, txdlp++) {
- skb_frag_t *frag =
- &skb_shinfo(skb)->frags[j];
- pci_unmap_page(nic->pdev,
- (dma_addr_t)
- txdlp->
- Buffer_Pointer,
- frag->size,
- PCI_DMA_TODEVICE);
- }
- txdlp = temp;
- }
- memset(txdlp, 0,
- (sizeof(TxD_t) * config->max_txds));
-
- /* Updating the statistics block */
- nic->stats.tx_packets++;
- nic->stats.tx_bytes += skb->len;
- dev_kfree_skb_irq(skb);
-
- get_info.offset++;
- get_info.offset %= get_info.fifo_len + 1;
- txdlp = (TxD_t *) nic->list_info[i]
- [get_info.offset].list_virt_addr;
- mac_control->tx_curr_get_info[i].offset =
- get_info.offset;
+ txdlp = temp;
}
+ memset(txdlp, 0,
+ (sizeof(TxD_t) * fifo_data->max_txds));
+
+ /* Updating the statistics block */
+ nic->stats.tx_bytes += skb->len;
+ dev_kfree_skb_irq(skb);
+
+ get_info.offset++;
+ get_info.offset %= get_info.fifo_len + 1;
+ txdlp = (TxD_t *) fifo_data->list_info
+ [get_info.offset].list_virt_addr;
+ fifo_data->tx_curr_get_info.offset =
+ get_info.offset;
}
spin_lock(&nic->tx_lock);
@@ -2301,13 +2655,13 @@ static void tx_intr_handler(struct s2io_nic *nic)
spin_unlock(&nic->tx_lock);
}
-/**
+/**
* alarm_intr_handler - Alarm Interrrupt handler
* @nic: device private variable
- * Description: If the interrupt was neither because of Rx packet or Tx
+ * Description: If the interrupt was neither because of Rx packet or Tx
* complete, this function is called. If the interrupt was to indicate
- * a loss of link, the OSM link status handler is invoked for any other
- * alarm interrupt the block that raised the interrupt is displayed
+ * a loss of link, the OSM link status handler is invoked for any other
+ * alarm interrupt the block that raised the interrupt is displayed
* and a H/W reset is issued.
* Return Value:
* NONE
@@ -2320,10 +2674,32 @@ static void alarm_intr_handler(struct s2io_nic *nic)
register u64 val64 = 0, err_reg = 0;
/* Handling link status change error Intr */
- err_reg = readq(&bar0->mac_rmac_err_reg);
- writeq(err_reg, &bar0->mac_rmac_err_reg);
- if (err_reg & RMAC_LINK_STATE_CHANGE_INT) {
- schedule_work(&nic->set_link_task);
+ if (s2io_link_fault_indication(nic) == MAC_RMAC_ERR_TIMER) {
+ err_reg = readq(&bar0->mac_rmac_err_reg);
+ writeq(err_reg, &bar0->mac_rmac_err_reg);
+ if (err_reg & RMAC_LINK_STATE_CHANGE_INT) {
+ schedule_work(&nic->set_link_task);
+ }
+ }
+
+ /* Handling Ecc errors */
+ val64 = readq(&bar0->mc_err_reg);
+ writeq(val64, &bar0->mc_err_reg);
+ if (val64 & (MC_ERR_REG_ECC_ALL_SNG | MC_ERR_REG_ECC_ALL_DBL)) {
+ if (val64 & MC_ERR_REG_ECC_ALL_DBL) {
+ nic->mac_control.stats_info->sw_stat.
+ double_ecc_errs++;
+ DBG_PRINT(ERR_DBG, "%s: Device indicates ",
+ dev->name);
+ DBG_PRINT(ERR_DBG, "double ECC error!!\n");
+ if (nic->device_type != XFRAME_II_DEVICE) {
+ netif_stop_queue(dev);
+ schedule_work(&nic->rst_timer_task);
+ }
+ } else {
+ nic->mac_control.stats_info->sw_stat.
+ single_ecc_errs++;
+ }
}
/* In case of a serious error, the device will be Reset. */
@@ -2338,7 +2714,7 @@ static void alarm_intr_handler(struct s2io_nic *nic)
/*
* Also as mentioned in the latest Errata sheets if the PCC_FB_ECC
* Error occurs, the adapter will be recycled by disabling the
- * adapter enable bit and enabling it again after the device
+ * adapter enable bit and enabling it again after the device
* becomes Quiescent.
*/
val64 = readq(&bar0->pcc_err_reg);
@@ -2354,18 +2730,18 @@ static void alarm_intr_handler(struct s2io_nic *nic)
/* Other type of interrupts are not being handled now, TODO */
}
-/**
+/**
* wait_for_cmd_complete - waits for a command to complete.
- * @sp : private member of the device structure, which is a pointer to the
+ * @sp : private member of the device structure, which is a pointer to the
* s2io_nic structure.
- * Description: Function that waits for a command to Write into RMAC
- * ADDR DATA registers to be completed and returns either success or
- * error depending on whether the command was complete or not.
+ * Description: Function that waits for a command to Write into RMAC
+ * ADDR DATA registers to be completed and returns either success or
+ * error depending on whether the command was complete or not.
* Return value:
* SUCCESS on success and FAILURE on failure.
*/
-static int wait_for_cmd_complete(nic_t * sp)
+int wait_for_cmd_complete(nic_t * sp)
{
XENA_dev_config_t __iomem *bar0 = sp->bar0;
int ret = FAILURE, cnt = 0;
@@ -2385,29 +2761,32 @@ static int wait_for_cmd_complete(nic_t * sp)
return ret;
}
-/**
- * s2io_reset - Resets the card.
+/**
+ * s2io_reset - Resets the card.
* @sp : private member of the device structure.
* Description: Function to Reset the card. This function then also
- * restores the previously saved PCI configuration space registers as
+ * restores the previously saved PCI configuration space registers as
* the card reset also resets the configuration space.
* Return value:
* void.
*/
-static void s2io_reset(nic_t * sp)
+void s2io_reset(nic_t * sp)
{
XENA_dev_config_t __iomem *bar0 = sp->bar0;
u64 val64;
- u16 subid;
+ u16 subid, pci_cmd;
+
+ /* Back up the PCI-X CMD reg, dont want to lose MMRBC, OST settings */
+ pci_read_config_word(sp->pdev, PCIX_COMMAND_REGISTER, &(pci_cmd));
val64 = SW_RESET_ALL;
writeq(val64, &bar0->sw_reset);
- /*
- * At this stage, if the PCI write is indeed completed, the
- * card is reset and so is the PCI Config space of the device.
- * So a read cannot be issued at this stage on any of the
+ /*
+ * At this stage, if the PCI write is indeed completed, the
+ * card is reset and so is the PCI Config space of the device.
+ * So a read cannot be issued at this stage on any of the
* registers to ensure the write into "sw_reset" register
* has gone through.
* Question: Is there any system call that will explicitly force
@@ -2418,42 +2797,72 @@ static void s2io_reset(nic_t * sp)
*/
msleep(250);
- /* Restore the PCI state saved during initializarion. */
+ /* Restore the PCI state saved during initialization. */
pci_restore_state(sp->pdev);
+ pci_write_config_word(sp->pdev, PCIX_COMMAND_REGISTER,
+ pci_cmd);
s2io_init_pci(sp);
msleep(250);
+ /* Set swapper to enable I/O register access */
+ s2io_set_swapper(sp);
+
+ /* Clear certain PCI/PCI-X fields after reset */
+ if (sp->device_type == XFRAME_II_DEVICE) {
+ /* Clear parity err detect bit */
+ pci_write_config_word(sp->pdev, PCI_STATUS, 0x8000);
+
+ /* Clearing PCIX Ecc status register */
+ pci_write_config_dword(sp->pdev, 0x68, 0x7C);
+
+ /* Clearing PCI_STATUS error reflected here */
+ writeq(BIT(62), &bar0->txpic_int_reg);
+ }
+
+ /* Reset device statistics maintained by OS */
+ memset(&sp->stats, 0, sizeof (struct net_device_stats));
+
/* SXE-002: Configure link and activity LED to turn it off */
subid = sp->pdev->subsystem_device;
- if ((subid & 0xFF) >= 0x07) {
+ if (((subid & 0xFF) >= 0x07) &&
+ (sp->device_type == XFRAME_I_DEVICE)) {
val64 = readq(&bar0->gpio_control);
val64 |= 0x0000800000000000ULL;
writeq(val64, &bar0->gpio_control);
val64 = 0x0411040400000000ULL;
- writeq(val64, (void __iomem *) bar0 + 0x2700);
+ writeq(val64, (void __iomem *) ((u8 *) bar0 + 0x2700));
+ }
+
+ /*
+ * Clear spurious ECC interrupts that would have occured on
+ * XFRAME II cards after reset.
+ */
+ if (sp->device_type == XFRAME_II_DEVICE) {
+ val64 = readq(&bar0->pcc_err_reg);
+ writeq(val64, &bar0->pcc_err_reg);
}
sp->device_enabled_once = FALSE;
}
/**
- * s2io_set_swapper - to set the swapper controle on the card
- * @sp : private member of the device structure,
+ * s2io_set_swapper - to set the swapper controle on the card
+ * @sp : private member of the device structure,
* pointer to the s2io_nic structure.
- * Description: Function to set the swapper control on the card
+ * Description: Function to set the swapper control on the card
* correctly depending on the 'endianness' of the system.
* Return value:
* SUCCESS on success and FAILURE on failure.
*/
-static int s2io_set_swapper(nic_t * sp)
+int s2io_set_swapper(nic_t * sp)
{
struct net_device *dev = sp->dev;
XENA_dev_config_t __iomem *bar0 = sp->bar0;
u64 val64, valt, valr;
- /*
+ /*
* Set proper endian settings and verify the same by reading
* the PIF Feed-back register.
*/
@@ -2505,8 +2914,9 @@ static int s2io_set_swapper(nic_t * sp)
i++;
}
if(i == 4) {
+ unsigned long long x = val64;
DBG_PRINT(ERR_DBG, "Write failed, Xmsi_addr ");
- DBG_PRINT(ERR_DBG, "reads:0x%llx\n",val64);
+ DBG_PRINT(ERR_DBG, "reads:0x%llx\n", x);
return FAILURE;
}
}
@@ -2514,8 +2924,8 @@ static int s2io_set_swapper(nic_t * sp)
val64 &= 0xFFFF000000000000ULL;
#ifdef __BIG_ENDIAN
- /*
- * The device by default set to a big endian format, so a
+ /*
+ * The device by default set to a big endian format, so a
* big endian driver need not set anything.
*/
val64 |= (SWAPPER_CTRL_TXP_FE |
@@ -2531,9 +2941,9 @@ static int s2io_set_swapper(nic_t * sp)
SWAPPER_CTRL_STATS_FE | SWAPPER_CTRL_STATS_SE);
writeq(val64, &bar0->swapper_ctrl);
#else
- /*
+ /*
* Initially we enable all bits to make it accessible by the
- * driver, then we selectively enable only those bits that
+ * driver, then we selectively enable only those bits that
* we want to set.
*/
val64 |= (SWAPPER_CTRL_TXP_FE |
@@ -2555,8 +2965,8 @@ static int s2io_set_swapper(nic_t * sp)
#endif
val64 = readq(&bar0->swapper_ctrl);
- /*
- * Verifying if endian settings are accurate by reading a
+ /*
+ * Verifying if endian settings are accurate by reading a
* feedback register.
*/
val64 = readq(&bar0->pif_rd_swapper_fb);
@@ -2576,55 +2986,63 @@ static int s2io_set_swapper(nic_t * sp)
* Functions defined below concern the OS part of the driver *
* ********************************************************* */
-/**
+/**
* s2io_open - open entry point of the driver
* @dev : pointer to the device structure.
* Description:
* This function is the open entry point of the driver. It mainly calls a
* function to allocate Rx buffers and inserts them into the buffer
- * descriptors and then enables the Rx part of the NIC.
+ * descriptors and then enables the Rx part of the NIC.
* Return value:
* 0 on success and an appropriate (-)ve integer as defined in errno.h
* file on failure.
*/
-static int s2io_open(struct net_device *dev)
+int s2io_open(struct net_device *dev)
{
nic_t *sp = dev->priv;
int err = 0;
- /*
- * Make sure you have link off by default every time
+ /*
+ * Make sure you have link off by default every time
* Nic is initialized
*/
netif_carrier_off(dev);
- sp->last_link_state = LINK_DOWN;
+ sp->last_link_state = 0;
/* Initialize H/W and enable interrupts */
if (s2io_card_up(sp)) {
DBG_PRINT(ERR_DBG, "%s: H/W initialization failed\n",
dev->name);
- return -ENODEV;
+ err = -ENODEV;
+ goto hw_init_failed;
}
/* After proper initialization of H/W, register ISR */
- err = request_irq((int) sp->irq, s2io_isr, SA_SHIRQ,
+ err = request_irq((int) sp->pdev->irq, s2io_isr, SA_SHIRQ,
sp->name, dev);
if (err) {
- s2io_reset(sp);
DBG_PRINT(ERR_DBG, "%s: ISR registration failed\n",
dev->name);
- return err;
+ goto isr_registration_failed;
}
if (s2io_set_mac_addr(dev, dev->dev_addr) == FAILURE) {
DBG_PRINT(ERR_DBG, "Set Mac Address Failed\n");
- s2io_reset(sp);
- return -ENODEV;
+ err = -ENODEV;
+ goto setting_mac_address_failed;
}
netif_start_queue(dev);
return 0;
+
+setting_mac_address_failed:
+ free_irq(sp->pdev->irq, dev);
+isr_registration_failed:
+ del_timer_sync(&sp->alarm_timer);
+ s2io_reset(sp);
+hw_init_failed:
+ return err;
}
/**
@@ -2640,16 +3058,15 @@ static int s2io_open(struct net_device *dev)
* file on failure.
*/
-static int s2io_close(struct net_device *dev)
+int s2io_close(struct net_device *dev)
{
nic_t *sp = dev->priv;
-
flush_scheduled_work();
netif_stop_queue(dev);
/* Reset card, kill tasklet and free Tx and Rx buffers. */
s2io_card_down(sp);
- free_irq(dev->irq, dev);
+ free_irq(sp->pdev->irq, dev);
sp->device_close_flag = TRUE; /* Device is shut down. */
return 0;
}
@@ -2667,7 +3084,7 @@ static int s2io_close(struct net_device *dev)
* 0 on success & 1 on failure.
*/
-static int s2io_xmit(struct sk_buff *skb, struct net_device *dev)
+int s2io_xmit(struct sk_buff *skb, struct net_device *dev)
{
nic_t *sp = dev->priv;
u16 frg_cnt, frg_len, i, queue, queue_len, put_off, get_off;
@@ -2678,29 +3095,39 @@ static int s2io_xmit(struct sk_buff *skb, struct net_device *dev)
#ifdef NETIF_F_TSO
int mss;
#endif
+ u16 vlan_tag = 0;
+ int vlan_priority = 0;
mac_info_t *mac_control;
struct config_param *config;
- XENA_dev_config_t __iomem *bar0 = sp->bar0;
mac_control = &sp->mac_control;
config = &sp->config;
- DBG_PRINT(TX_DBG, "%s: In S2IO Tx routine\n", dev->name);
+ DBG_PRINT(TX_DBG, "%s: In Neterion Tx routine\n", dev->name);
spin_lock_irqsave(&sp->tx_lock, flags);
-
if (atomic_read(&sp->card_state) == CARD_DOWN) {
- DBG_PRINT(ERR_DBG, "%s: Card going down for reset\n",
+ DBG_PRINT(TX_DBG, "%s: Card going down for reset\n",
dev->name);
spin_unlock_irqrestore(&sp->tx_lock, flags);
- return 1;
+ dev_kfree_skb(skb);
+ return 0;
}
queue = 0;
- put_off = (u16) mac_control->tx_curr_put_info[queue].offset;
- get_off = (u16) mac_control->tx_curr_get_info[queue].offset;
- txdp = (TxD_t *) sp->list_info[queue][put_off].list_virt_addr;
- queue_len = mac_control->tx_curr_put_info[queue].fifo_len + 1;
+ /* Get Fifo number to Transmit based on vlan priority */
+ if (sp->vlgrp && vlan_tx_tag_present(skb)) {
+ vlan_tag = vlan_tx_tag_get(skb);
+ vlan_priority = vlan_tag >> 13;
+ queue = config->fifo_mapping[vlan_priority];
+ }
+
+ put_off = (u16) mac_control->fifos[queue].tx_curr_put_info.offset;
+ get_off = (u16) mac_control->fifos[queue].tx_curr_get_info.offset;
+ txdp = (TxD_t *) mac_control->fifos[queue].list_info[put_off].
+ list_virt_addr;
+
+ queue_len = mac_control->fifos[queue].tx_curr_put_info.fifo_len + 1;
/* Avoid "put" pointer going beyond "get" pointer */
if (txdp->Host_Control || (((put_off + 1) % queue_len) == get_off)) {
DBG_PRINT(ERR_DBG, "Error in xmit, No free TXDs.\n");
@@ -2709,6 +3136,15 @@ static int s2io_xmit(struct sk_buff *skb, struct net_device *dev)
spin_unlock_irqrestore(&sp->tx_lock, flags);
return 0;
}
+
+ /* A buffer with no data will be dropped */
+ if (!skb->len) {
+ DBG_PRINT(TX_DBG, "%s:Buffer has no data..\n", dev->name);
+ dev_kfree_skb(skb);
+ spin_unlock_irqrestore(&sp->tx_lock, flags);
+ return 0;
+ }
+
#ifdef NETIF_F_TSO
mss = skb_shinfo(skb)->tso_size;
if (mss) {
@@ -2720,9 +3156,9 @@ static int s2io_xmit(struct sk_buff *skb, struct net_device *dev)
frg_cnt = skb_shinfo(skb)->nr_frags;
frg_len = skb->len - skb->data_len;
- txdp->Host_Control = (unsigned long) skb;
txdp->Buffer_Pointer = pci_map_single
(sp->pdev, skb->data, frg_len, PCI_DMA_TODEVICE);
+ txdp->Host_Control = (unsigned long) skb;
if (skb->ip_summed == CHECKSUM_HW) {
txdp->Control_2 |=
(TXD_TX_CKO_IPV4_EN | TXD_TX_CKO_TCP_EN |
@@ -2731,6 +3167,11 @@ static int s2io_xmit(struct sk_buff *skb, struct net_device *dev)
txdp->Control_2 |= config->tx_intr_type;
+ if (sp->vlgrp && vlan_tx_tag_present(skb)) {
+ txdp->Control_2 |= TXD_VLAN_ENABLE;
+ txdp->Control_2 |= TXD_VLAN_TAG(vlan_tag);
+ }
+
txdp->Control_1 |= (TXD_BUFFER0_SIZE(frg_len) |
TXD_GATHER_CODE_FIRST);
txdp->Control_1 |= TXD_LIST_OWN_XENA;
@@ -2738,6 +3179,9 @@ static int s2io_xmit(struct sk_buff *skb, struct net_device *dev)
/* For fragmented SKB. */
for (i = 0; i < frg_cnt; i++) {
skb_frag_t *frag = &skb_shinfo(skb)->frags[i];
+ /* A '0' length fragment will be ignored */
+ if (!frag->size)
+ continue;
txdp++;
txdp->Buffer_Pointer = (u64) pci_map_page
(sp->pdev, frag->page, frag->page_offset,
@@ -2747,23 +3191,23 @@ static int s2io_xmit(struct sk_buff *skb, struct net_device *dev)
txdp->Control_1 |= TXD_GATHER_CODE_LAST;
tx_fifo = mac_control->tx_FIFO_start[queue];
- val64 = sp->list_info[queue][put_off].list_phy_addr;
+ val64 = mac_control->fifos[queue].list_info[put_off].list_phy_addr;
writeq(val64, &tx_fifo->TxDL_Pointer);
val64 = (TX_FIFO_LAST_TXD_NUM(frg_cnt) | TX_FIFO_FIRST_LIST |
TX_FIFO_LAST_LIST);
+
#ifdef NETIF_F_TSO
if (mss)
val64 |= TX_FIFO_SPECIAL_FUNC;
#endif
writeq(val64, &tx_fifo->List_Control);
- /* Perform a PCI read to flush previous writes */
- val64 = readq(&bar0->general_int_status);
+ mmiowb();
put_off++;
- put_off %= mac_control->tx_curr_put_info[queue].fifo_len + 1;
- mac_control->tx_curr_put_info[queue].offset = put_off;
+ put_off %= mac_control->fifos[queue].tx_curr_put_info.fifo_len + 1;
+ mac_control->fifos[queue].tx_curr_put_info.offset = put_off;
/* Avoid "put" pointer going beyond "get" pointer */
if (((put_off + 1) % queue_len) == get_off) {
@@ -2779,18 +3223,74 @@ static int s2io_xmit(struct sk_buff *skb, struct net_device *dev)
return 0;
}
+static void
+s2io_alarm_handle(unsigned long data)
+{
+ nic_t *sp = (nic_t *)data;
+
+ alarm_intr_handler(sp);
+ mod_timer(&sp->alarm_timer, jiffies + HZ / 2);
+}
+
+static void s2io_txpic_intr_handle(nic_t *sp)
+{
+ XENA_dev_config_t *bar0 = (XENA_dev_config_t *) sp->bar0;
+ u64 val64;
+
+ val64 = readq(&bar0->pic_int_status);
+ if (val64 & PIC_INT_GPIO) {
+ val64 = readq(&bar0->gpio_int_reg);
+ if ((val64 & GPIO_INT_REG_LINK_DOWN) &&
+ (val64 & GPIO_INT_REG_LINK_UP)) {
+ val64 |= GPIO_INT_REG_LINK_DOWN;
+ val64 |= GPIO_INT_REG_LINK_UP;
+ writeq(val64, &bar0->gpio_int_reg);
+ goto masking;
+ }
+
+ if (((sp->last_link_state == LINK_UP) &&
+ (val64 & GPIO_INT_REG_LINK_DOWN)) ||
+ ((sp->last_link_state == LINK_DOWN) &&
+ (val64 & GPIO_INT_REG_LINK_UP))) {
+ val64 = readq(&bar0->gpio_int_mask);
+ val64 |= GPIO_INT_MASK_LINK_DOWN;
+ val64 |= GPIO_INT_MASK_LINK_UP;
+ writeq(val64, &bar0->gpio_int_mask);
+ s2io_set_link((unsigned long)sp);
+ }
+masking:
+ if (sp->last_link_state == LINK_UP) {
+ /*enable down interrupt */
+ val64 = readq(&bar0->gpio_int_mask);
+ /* unmasks link down intr */
+ val64 &= ~GPIO_INT_MASK_LINK_DOWN;
+ /* masks link up intr */
+ val64 |= GPIO_INT_MASK_LINK_UP;
+ writeq(val64, &bar0->gpio_int_mask);
+ } else {
+ /*enable UP Interrupt */
+ val64 = readq(&bar0->gpio_int_mask);
+ /* unmasks link up interrupt */
+ val64 &= ~GPIO_INT_MASK_LINK_UP;
+ /* masks link down interrupt */
+ val64 |= GPIO_INT_MASK_LINK_DOWN;
+ writeq(val64, &bar0->gpio_int_mask);
+ }
+ }
+}
+
/**
* s2io_isr - ISR handler of the device .
* @irq: the irq of the device.
* @dev_id: a void pointer to the dev structure of the NIC.
* @pt_regs: pointer to the registers pushed on the stack.
- * Description: This function is the ISR handler of the device. It
- * identifies the reason for the interrupt and calls the relevant
- * service routines. As a contongency measure, this ISR allocates the
+ * Description: This function is the ISR handler of the device. It
+ * identifies the reason for the interrupt and calls the relevant
+ * service routines. As a contongency measure, this ISR allocates the
* recv buffers, if their numbers are below the panic value which is
* presently set to 25% of the original number of rcv buffers allocated.
* Return value:
- * IRQ_HANDLED: will be returned if IRQ was handled by this routine
+ * IRQ_HANDLED: will be returned if IRQ was handled by this routine
* IRQ_NONE: will be returned if interrupt is not from our device
*/
static irqreturn_t s2io_isr(int irq, void *dev_id, struct pt_regs *regs)
@@ -2798,40 +3298,31 @@ static irqreturn_t s2io_isr(int irq, void *dev_id, struct pt_regs *regs)
struct net_device *dev = (struct net_device *) dev_id;
nic_t *sp = dev->priv;
XENA_dev_config_t __iomem *bar0 = sp->bar0;
-#ifndef CONFIG_S2IO_NAPI
- int i, ret;
-#endif
- u64 reason = 0;
+ int i;
+ u64 reason = 0, val64;
mac_info_t *mac_control;
struct config_param *config;
+ atomic_inc(&sp->isr_cnt);
mac_control = &sp->mac_control;
config = &sp->config;
- /*
+ /*
* Identify the cause for interrupt and call the appropriate
* interrupt handler. Causes for the interrupt could be;
* 1. Rx of packet.
* 2. Tx complete.
* 3. Link down.
- * 4. Error in any functional blocks of the NIC.
+ * 4. Error in any functional blocks of the NIC.
*/
reason = readq(&bar0->general_int_status);
if (!reason) {
/* The interrupt was not raised by Xena. */
+ atomic_dec(&sp->isr_cnt);
return IRQ_NONE;
}
- /* If Intr is because of Tx Traffic */
- if (reason & GEN_INTR_TXTRAFFIC) {
- tx_intr_handler(sp);
- }
-
- /* If Intr is because of an error */
- if (reason & (GEN_ERROR_INTR))
- alarm_intr_handler(sp);
-
#ifdef CONFIG_S2IO_NAPI
if (reason & GEN_INTR_RXTRAFFIC) {
if (netif_rx_schedule_prep(dev)) {
@@ -2843,17 +3334,43 @@ static irqreturn_t s2io_isr(int irq, void *dev_id, struct pt_regs *regs)
#else
/* If Intr is because of Rx Traffic */
if (reason & GEN_INTR_RXTRAFFIC) {
- rx_intr_handler(sp);
+ /*
+ * rx_traffic_int reg is an R1 register, writing all 1's
+ * will ensure that the actual interrupt causing bit get's
+ * cleared and hence a read can be avoided.
+ */
+ val64 = 0xFFFFFFFFFFFFFFFFULL;
+ writeq(val64, &bar0->rx_traffic_int);
+ for (i = 0; i < config->rx_ring_num; i++) {
+ rx_intr_handler(&mac_control->rings[i]);
+ }
}
#endif
- /*
- * If the Rx buffer count is below the panic threshold then
- * reallocate the buffers from the interrupt handler itself,
+ /* If Intr is because of Tx Traffic */
+ if (reason & GEN_INTR_TXTRAFFIC) {
+ /*
+ * tx_traffic_int reg is an R1 register, writing all 1's
+ * will ensure that the actual interrupt causing bit get's
+ * cleared and hence a read can be avoided.
+ */
+ val64 = 0xFFFFFFFFFFFFFFFFULL;
+ writeq(val64, &bar0->tx_traffic_int);
+
+ for (i = 0; i < config->tx_fifo_num; i++)
+ tx_intr_handler(&mac_control->fifos[i]);
+ }
+
+ if (reason & GEN_INTR_TXPIC)
+ s2io_txpic_intr_handle(sp);
+ /*
+ * If the Rx buffer count is below the panic threshold then
+ * reallocate the buffers from the interrupt handler itself,
* else schedule a tasklet to reallocate the buffers.
*/
#ifndef CONFIG_S2IO_NAPI
for (i = 0; i < config->rx_ring_num; i++) {
+ int ret;
int rxb_size = atomic_read(&sp->rx_bufs_left[i]);
int level = rx_buffer_level(sp, rxb_size, i);
@@ -2865,6 +3382,7 @@ static irqreturn_t s2io_isr(int irq, void *dev_id, struct pt_regs *regs)
dev->name);
DBG_PRINT(ERR_DBG, " in ISR!!\n");
clear_bit(0, (&sp->tasklet_status));
+ atomic_dec(&sp->isr_cnt);
return IRQ_HANDLED;
}
clear_bit(0, (&sp->tasklet_status));
@@ -2874,33 +3392,69 @@ static irqreturn_t s2io_isr(int irq, void *dev_id, struct pt_regs *regs)
}
#endif
+ atomic_dec(&sp->isr_cnt);
return IRQ_HANDLED;
}
/**
- * s2io_get_stats - Updates the device statistics structure.
+ * s2io_updt_stats -
+ */
+static void s2io_updt_stats(nic_t *sp)
+{
+ XENA_dev_config_t __iomem *bar0 = sp->bar0;
+ u64 val64;
+ int cnt = 0;
+
+ if (atomic_read(&sp->card_state) == CARD_UP) {
+ /* Apprx 30us on a 133 MHz bus */
+ val64 = SET_UPDT_CLICKS(10) |
+ STAT_CFG_ONE_SHOT_EN | STAT_CFG_STAT_EN;
+ writeq(val64, &bar0->stat_cfg);
+ do {
+ udelay(100);
+ val64 = readq(&bar0->stat_cfg);
+ if (!(val64 & BIT(0)))
+ break;
+ cnt++;
+ if (cnt == 5)
+ break; /* Updt failed */
+ } while(1);
+ }
+}
+
+/**
+ * s2io_get_stats - Updates the device statistics structure.
* @dev : pointer to the device structure.
* Description:
- * This function updates the device statistics structure in the s2io_nic
+ * This function updates the device statistics structure in the s2io_nic
* structure and returns a pointer to the same.
* Return value:
* pointer to the updated net_device_stats structure.
*/
-static struct net_device_stats *s2io_get_stats(struct net_device *dev)
+struct net_device_stats *s2io_get_stats(struct net_device *dev)
{
nic_t *sp = dev->priv;
mac_info_t *mac_control;
struct config_param *config;
+
mac_control = &sp->mac_control;
config = &sp->config;
- sp->stats.tx_errors = mac_control->stats_info->tmac_any_err_frms;
- sp->stats.rx_errors = mac_control->stats_info->rmac_drop_frms;
- sp->stats.multicast = mac_control->stats_info->rmac_vld_mcst_frms;
+ /* Configure Stats for immediate updt */
+ s2io_updt_stats(sp);
+
+ sp->stats.tx_packets =
+ le32_to_cpu(mac_control->stats_info->tmac_frms);
+ sp->stats.tx_errors =
+ le32_to_cpu(mac_control->stats_info->tmac_any_err_frms);
+ sp->stats.rx_errors =
+ le32_to_cpu(mac_control->stats_info->rmac_drop_frms);
+ sp->stats.multicast =
+ le32_to_cpu(mac_control->stats_info->rmac_vld_mcst_frms);
sp->stats.rx_length_errors =
- mac_control->stats_info->rmac_long_frms;
+ le32_to_cpu(mac_control->stats_info->rmac_long_frms);
return (&sp->stats);
}
@@ -2909,8 +3463,8 @@ static struct net_device_stats *s2io_get_stats(struct net_device *dev)
* s2io_set_multicast - entry point for multicast address enable/disable.
* @dev : pointer to the device structure
* Description:
- * This function is a driver entry point which gets called by the kernel
- * whenever multicast addresses must be enabled/disabled. This also gets
+ * This function is a driver entry point which gets called by the kernel
+ * whenever multicast addresses must be enabled/disabled. This also gets
* called to set/reset promiscuous mode. Depending on the deivce flag, we
* determine, if multicast address must be enabled or if promiscuous mode
* is to be disabled etc.
@@ -2948,6 +3502,8 @@ static void s2io_set_multicast(struct net_device *dev)
/* Disable all Multicast addresses */
writeq(RMAC_ADDR_DATA0_MEM_ADDR(dis_addr),
&bar0->rmac_addr_data0_mem);
+ writeq(RMAC_ADDR_DATA1_MEM_MASK(0x0),
+ &bar0->rmac_addr_data1_mem);
val64 = RMAC_ADDR_CMD_MEM_WE |
RMAC_ADDR_CMD_MEM_STROBE_NEW_CMD |
RMAC_ADDR_CMD_MEM_OFFSET(sp->all_multi_pos);
@@ -3010,7 +3566,7 @@ static void s2io_set_multicast(struct net_device *dev)
writeq(RMAC_ADDR_DATA0_MEM_ADDR(dis_addr),
&bar0->rmac_addr_data0_mem);
writeq(RMAC_ADDR_DATA1_MEM_MASK(0ULL),
- &bar0->rmac_addr_data1_mem);
+ &bar0->rmac_addr_data1_mem);
val64 = RMAC_ADDR_CMD_MEM_WE |
RMAC_ADDR_CMD_MEM_STROBE_NEW_CMD |
RMAC_ADDR_CMD_MEM_OFFSET
@@ -3039,8 +3595,7 @@ static void s2io_set_multicast(struct net_device *dev)
writeq(RMAC_ADDR_DATA0_MEM_ADDR(mac_addr),
&bar0->rmac_addr_data0_mem);
writeq(RMAC_ADDR_DATA1_MEM_MASK(0ULL),
- &bar0->rmac_addr_data1_mem);
-
+ &bar0->rmac_addr_data1_mem);
val64 = RMAC_ADDR_CMD_MEM_WE |
RMAC_ADDR_CMD_MEM_STROBE_NEW_CMD |
RMAC_ADDR_CMD_MEM_OFFSET
@@ -3059,12 +3614,12 @@ static void s2io_set_multicast(struct net_device *dev)
}
/**
- * s2io_set_mac_addr - Programs the Xframe mac address
+ * s2io_set_mac_addr - Programs the Xframe mac address
* @dev : pointer to the device structure.
* @addr: a uchar pointer to the new mac address which is to be set.
- * Description : This procedure will program the Xframe to receive
+ * Description : This procedure will program the Xframe to receive
* frames with new Mac Address
- * Return value: SUCCESS on success and an appropriate (-)ve integer
+ * Return value: SUCCESS on success and an appropriate (-)ve integer
* as defined in errno.h file on failure.
*/
@@ -3075,10 +3630,10 @@ int s2io_set_mac_addr(struct net_device *dev, u8 * addr)
register u64 val64, mac_addr = 0;
int i;
- /*
+ /*
* Set the new MAC address as the new unicast filter and reflect this
* change on the device address registered with the OS. It will be
- * at offset 0.
+ * at offset 0.
*/
for (i = 0; i < ETH_ALEN; i++) {
mac_addr <<= 8;
@@ -3102,12 +3657,12 @@ int s2io_set_mac_addr(struct net_device *dev, u8 * addr)
}
/**
- * s2io_ethtool_sset - Sets different link parameters.
+ * s2io_ethtool_sset - Sets different link parameters.
* @sp : private member of the device structure, which is a pointer to the * s2io_nic structure.
* @info: pointer to the structure with parameters given by ethtool to set
* link information.
* Description:
- * The function sets different link parameters provided by the user onto
+ * The function sets different link parameters provided by the user onto
* the NIC.
* Return value:
* 0 on success.
@@ -3129,7 +3684,7 @@ static int s2io_ethtool_sset(struct net_device *dev,
}
/**
- * s2io_ethtol_gset - Return link specific information.
+ * s2io_ethtol_gset - Return link specific information.
* @sp : private member of the device structure, pointer to the
* s2io_nic structure.
* @info : pointer to the structure with parameters given by ethtool
@@ -3161,8 +3716,8 @@ static int s2io_ethtool_gset(struct net_device *dev, struct ethtool_cmd *info)
}
/**
- * s2io_ethtool_gdrvinfo - Returns driver specific information.
- * @sp : private member of the device structure, which is a pointer to the
+ * s2io_ethtool_gdrvinfo - Returns driver specific information.
+ * @sp : private member of the device structure, which is a pointer to the
* s2io_nic structure.
* @info : pointer to the structure with parameters given by ethtool to
* return driver information.
@@ -3190,9 +3745,9 @@ static void s2io_ethtool_gdrvinfo(struct net_device *dev,
/**
* s2io_ethtool_gregs - dumps the entire space of Xfame into the buffer.
- * @sp: private member of the device structure, which is a pointer to the
+ * @sp: private member of the device structure, which is a pointer to the
* s2io_nic structure.
- * @regs : pointer to the structure with parameters given by ethtool for
+ * @regs : pointer to the structure with parameters given by ethtool for
* dumping the registers.
* @reg_space: The input argumnet into which all the registers are dumped.
* Description:
@@ -3221,11 +3776,11 @@ static void s2io_ethtool_gregs(struct net_device *dev,
/**
* s2io_phy_id - timer function that alternates adapter LED.
- * @data : address of the private member of the device structure, which
+ * @data : address of the private member of the device structure, which
* is a pointer to the s2io_nic structure, provided as an u32.
- * Description: This is actually the timer function that alternates the
- * adapter LED bit of the adapter control bit to set/reset every time on
- * invocation. The timer is set for 1/2 a second, hence tha NIC blinks
+ * Description: This is actually the timer function that alternates the
+ * adapter LED bit of the adapter control bit to set/reset every time on
+ * invocation. The timer is set for 1/2 a second, hence tha NIC blinks
* once every second.
*/
static void s2io_phy_id(unsigned long data)
@@ -3236,7 +3791,8 @@ static void s2io_phy_id(unsigned long data)
u16 subid;
subid = sp->pdev->subsystem_device;
- if ((subid & 0xFF) >= 0x07) {
+ if ((sp->device_type == XFRAME_II_DEVICE) ||
+ ((subid & 0xFF) >= 0x07)) {
val64 = readq(&bar0->gpio_control);
val64 ^= GPIO_CTRL_GPIO_0;
writeq(val64, &bar0->gpio_control);
@@ -3253,12 +3809,12 @@ static void s2io_phy_id(unsigned long data)
* s2io_ethtool_idnic - To physically identify the nic on the system.
* @sp : private member of the device structure, which is a pointer to the
* s2io_nic structure.
- * @id : pointer to the structure with identification parameters given by
+ * @id : pointer to the structure with identification parameters given by
* ethtool.
* Description: Used to physically identify the NIC on the system.
- * The Link LED will blink for a time specified by the user for
+ * The Link LED will blink for a time specified by the user for
* identification.
- * NOTE: The Link has to be Up to be able to blink the LED. Hence
+ * NOTE: The Link has to be Up to be able to blink the LED. Hence
* identification is possible only if it's link is up.
* Return value:
* int , returns 0 on success
@@ -3273,7 +3829,8 @@ static int s2io_ethtool_idnic(struct net_device *dev, u32 data)
subid = sp->pdev->subsystem_device;
last_gpio_ctrl_val = readq(&bar0->gpio_control);
- if ((subid & 0xFF) < 0x07) {
+ if ((sp->device_type == XFRAME_I_DEVICE) &&
+ ((subid & 0xFF) < 0x07)) {
val64 = readq(&bar0->adapter_control);
if (!(val64 & ADAPTER_CNTL_EN)) {
printk(KERN_ERR
@@ -3288,12 +3845,12 @@ static int s2io_ethtool_idnic(struct net_device *dev, u32 data)
}
mod_timer(&sp->id_timer, jiffies);
if (data)
- msleep(data * 1000);
+ msleep_interruptible(data * HZ);
else
- msleep(0xFFFFFFFF);
+ msleep_interruptible(MAX_FLICKER_TIME);
del_timer_sync(&sp->id_timer);
- if (CARDS_WITH_FAULTY_LINK_INDICATORS(subid)) {
+ if (CARDS_WITH_FAULTY_LINK_INDICATORS(sp->device_type, subid)) {
writeq(last_gpio_ctrl_val, &bar0->gpio_control);
last_gpio_ctrl_val = readq(&bar0->gpio_control);
}
@@ -3303,7 +3860,8 @@ static int s2io_ethtool_idnic(struct net_device *dev, u32 data)
/**
* s2io_ethtool_getpause_data -Pause frame frame generation and reception.
- * @sp : private member of the device structure, which is a pointer to the * s2io_nic structure.
+ * @sp : private member of the device structure, which is a pointer to the
+ * s2io_nic structure.
* @ep : pointer to the structure with pause parameters given by ethtool.
* Description:
* Returns the Pause frame generation and reception capability of the NIC.
@@ -3327,7 +3885,7 @@ static void s2io_ethtool_getpause_data(struct net_device *dev,
/**
* s2io_ethtool_setpause_data - set/reset pause frame generation.
- * @sp : private member of the device structure, which is a pointer to the
+ * @sp : private member of the device structure, which is a pointer to the
* s2io_nic structure.
* @ep : pointer to the structure with pause parameters given by ethtool.
* Description:
@@ -3338,7 +3896,7 @@ static void s2io_ethtool_getpause_data(struct net_device *dev,
*/
static int s2io_ethtool_setpause_data(struct net_device *dev,
- struct ethtool_pauseparam *ep)
+ struct ethtool_pauseparam *ep)
{
u64 val64;
nic_t *sp = dev->priv;
@@ -3359,13 +3917,13 @@ static int s2io_ethtool_setpause_data(struct net_device *dev,
/**
* read_eeprom - reads 4 bytes of data from user given offset.
- * @sp : private member of the device structure, which is a pointer to the
+ * @sp : private member of the device structure, which is a pointer to the
* s2io_nic structure.
* @off : offset at which the data must be written
* @data : Its an output parameter where the data read at the given
- * offset is stored.
+ * offset is stored.
* Description:
- * Will read 4 bytes of data from the user given offset and return the
+ * Will read 4 bytes of data from the user given offset and return the
* read data.
* NOTE: Will allow to read only part of the EEPROM visible through the
* I2C bus.
@@ -3406,7 +3964,7 @@ static int read_eeprom(nic_t * sp, int off, u32 * data)
* s2io_nic structure.
* @off : offset at which the data must be written
* @data : The data that is to be written
- * @cnt : Number of bytes of the data that are actually to be written into
+ * @cnt : Number of bytes of the data that are actually to be written into
* the Eeprom. (max of 3)
* Description:
* Actually writes the relevant part of the data value into the Eeprom
@@ -3443,7 +4001,7 @@ static int write_eeprom(nic_t * sp, int off, u32 data, int cnt)
/**
* s2io_ethtool_geeprom - reads the value stored in the Eeprom.
* @sp : private member of the device structure, which is a pointer to the * s2io_nic structure.
- * @eeprom : pointer to the user level structure provided by ethtool,
+ * @eeprom : pointer to the user level structure provided by ethtool,
* containing all relevant information.
* @data_buf : user defined value to be written into Eeprom.
* Description: Reads the values stored in the Eeprom at given offset
@@ -3454,7 +4012,7 @@ static int write_eeprom(nic_t * sp, int off, u32 data, int cnt)
*/
static int s2io_ethtool_geeprom(struct net_device *dev,
- struct ethtool_eeprom *eeprom, u8 * data_buf)
+ struct ethtool_eeprom *eeprom, u8 * data_buf)
{
u32 data, i, valid;
nic_t *sp = dev->priv;
@@ -3479,7 +4037,7 @@ static int s2io_ethtool_geeprom(struct net_device *dev,
* s2io_ethtool_seeprom - tries to write the user provided value in Eeprom
* @sp : private member of the device structure, which is a pointer to the
* s2io_nic structure.
- * @eeprom : pointer to the user level structure provided by ethtool,
+ * @eeprom : pointer to the user level structure provided by ethtool,
* containing all relevant information.
* @data_buf ; user defined value to be written into Eeprom.
* Description:
@@ -3527,8 +4085,8 @@ static int s2io_ethtool_seeprom(struct net_device *dev,
}
/**
- * s2io_register_test - reads and writes into all clock domains.
- * @sp : private member of the device structure, which is a pointer to the
+ * s2io_register_test - reads and writes into all clock domains.
+ * @sp : private member of the device structure, which is a pointer to the
* s2io_nic structure.
* @data : variable that returns the result of each of the test conducted b
* by the driver.
@@ -3545,8 +4103,8 @@ static int s2io_register_test(nic_t * sp, uint64_t * data)
u64 val64 = 0;
int fail = 0;
- val64 = readq(&bar0->pcc_enable);
- if (val64 != 0xff00000000000000ULL) {
+ val64 = readq(&bar0->pif_rd_swapper_fb);
+ if (val64 != 0x123456789abcdefULL) {
fail = 1;
DBG_PRINT(INFO_DBG, "Read Test level 1 fails\n");
}
@@ -3590,13 +4148,13 @@ static int s2io_register_test(nic_t * sp, uint64_t * data)
}
/**
- * s2io_eeprom_test - to verify that EEprom in the xena can be programmed.
+ * s2io_eeprom_test - to verify that EEprom in the xena can be programmed.
* @sp : private member of the device structure, which is a pointer to the
* s2io_nic structure.
* @data:variable that returns the result of each of the test conducted by
* the driver.
* Description:
- * Verify that EEPROM in the xena can be programmed using I2C_CONTROL
+ * Verify that EEPROM in the xena can be programmed using I2C_CONTROL
* register.
* Return value:
* 0 on success.
@@ -3661,14 +4219,14 @@ static int s2io_eeprom_test(nic_t * sp, uint64_t * data)
/**
* s2io_bist_test - invokes the MemBist test of the card .
- * @sp : private member of the device structure, which is a pointer to the
+ * @sp : private member of the device structure, which is a pointer to the
* s2io_nic structure.
- * @data:variable that returns the result of each of the test conducted by
+ * @data:variable that returns the result of each of the test conducted by
* the driver.
* Description:
* This invokes the MemBist test of the card. We give around
* 2 secs time for the Test to complete. If it's still not complete
- * within this peiod, we consider that the test failed.
+ * within this peiod, we consider that the test failed.
* Return value:
* 0 on success and -1 on failure.
*/
@@ -3697,13 +4255,13 @@ static int s2io_bist_test(nic_t * sp, uint64_t * data)
}
/**
- * s2io-link_test - verifies the link state of the nic
- * @sp ; private member of the device structure, which is a pointer to the
+ * s2io-link_test - verifies the link state of the nic
+ * @sp ; private member of the device structure, which is a pointer to the
* s2io_nic structure.
* @data: variable that returns the result of each of the test conducted by
* the driver.
* Description:
- * The function verifies the link state of the NIC and updates the input
+ * The function verifies the link state of the NIC and updates the input
* argument 'data' appropriately.
* Return value:
* 0 on success.
@@ -3722,13 +4280,13 @@ static int s2io_link_test(nic_t * sp, uint64_t * data)
}
/**
- * s2io_rldram_test - offline test for access to the RldRam chip on the NIC
- * @sp - private member of the device structure, which is a pointer to the
+ * s2io_rldram_test - offline test for access to the RldRam chip on the NIC
+ * @sp - private member of the device structure, which is a pointer to the
* s2io_nic structure.
- * @data - variable that returns the result of each of the test
+ * @data - variable that returns the result of each of the test
* conducted by the driver.
* Description:
- * This is one of the offline test that tests the read and write
+ * This is one of the offline test that tests the read and write
* access to the RldRam chip on the NIC.
* Return value:
* 0 on success.
@@ -3833,7 +4391,7 @@ static int s2io_rldram_test(nic_t * sp, uint64_t * data)
* s2io_nic structure.
* @ethtest : pointer to a ethtool command specific structure that will be
* returned to the user.
- * @data : variable that returns the result of each of the test
+ * @data : variable that returns the result of each of the test
* conducted by the driver.
* Description:
* This function conducts 6 tests ( 4 offline and 2 online) to determine
@@ -3851,23 +4409,18 @@ static void s2io_ethtool_test(struct net_device *dev,
if (ethtest->flags == ETH_TEST_FL_OFFLINE) {
/* Offline Tests. */
- if (orig_state) {
+ if (orig_state)
s2io_close(sp->dev);
- s2io_set_swapper(sp);
- } else
- s2io_set_swapper(sp);
if (s2io_register_test(sp, &data[0]))
ethtest->flags |= ETH_TEST_FL_FAILED;
s2io_reset(sp);
- s2io_set_swapper(sp);
if (s2io_rldram_test(sp, &data[3]))
ethtest->flags |= ETH_TEST_FL_FAILED;
s2io_reset(sp);
- s2io_set_swapper(sp);
if (s2io_eeprom_test(sp, &data[1]))
ethtest->flags |= ETH_TEST_FL_FAILED;
@@ -3910,61 +4463,111 @@ static void s2io_get_ethtool_stats(struct net_device *dev,
nic_t *sp = dev->priv;
StatInfo_t *stat_info = sp->mac_control.stats_info;
- tmp_stats[i++] = le32_to_cpu(stat_info->tmac_frms);
- tmp_stats[i++] = le32_to_cpu(stat_info->tmac_data_octets);
+ s2io_updt_stats(sp);
+ tmp_stats[i++] =
+ (u64)le32_to_cpu(stat_info->tmac_frms_oflow) << 32 |
+ le32_to_cpu(stat_info->tmac_frms);
+ tmp_stats[i++] =
+ (u64)le32_to_cpu(stat_info->tmac_data_octets_oflow) << 32 |
+ le32_to_cpu(stat_info->tmac_data_octets);
tmp_stats[i++] = le64_to_cpu(stat_info->tmac_drop_frms);
- tmp_stats[i++] = le32_to_cpu(stat_info->tmac_mcst_frms);
- tmp_stats[i++] = le32_to_cpu(stat_info->tmac_bcst_frms);
+ tmp_stats[i++] =
+ (u64)le32_to_cpu(stat_info->tmac_mcst_frms_oflow) << 32 |
+ le32_to_cpu(stat_info->tmac_mcst_frms);
+ tmp_stats[i++] =
+ (u64)le32_to_cpu(stat_info->tmac_bcst_frms_oflow) << 32 |
+ le32_to_cpu(stat_info->tmac_bcst_frms);
tmp_stats[i++] = le64_to_cpu(stat_info->tmac_pause_ctrl_frms);
- tmp_stats[i++] = le32_to_cpu(stat_info->tmac_any_err_frms);
+ tmp_stats[i++] =
+ (u64)le32_to_cpu(stat_info->tmac_any_err_frms_oflow) << 32 |
+ le32_to_cpu(stat_info->tmac_any_err_frms);
tmp_stats[i++] = le64_to_cpu(stat_info->tmac_vld_ip_octets);
- tmp_stats[i++] = le32_to_cpu(stat_info->tmac_vld_ip);
- tmp_stats[i++] = le32_to_cpu(stat_info->tmac_drop_ip);
- tmp_stats[i++] = le32_to_cpu(stat_info->tmac_icmp);
- tmp_stats[i++] = le32_to_cpu(stat_info->tmac_rst_tcp);
+ tmp_stats[i++] =
+ (u64)le32_to_cpu(stat_info->tmac_vld_ip_oflow) << 32 |
+ le32_to_cpu(stat_info->tmac_vld_ip);
+ tmp_stats[i++] =
+ (u64)le32_to_cpu(stat_info->tmac_drop_ip_oflow) << 32 |
+ le32_to_cpu(stat_info->tmac_drop_ip);
+ tmp_stats[i++] =
+ (u64)le32_to_cpu(stat_info->tmac_icmp_oflow) << 32 |
+ le32_to_cpu(stat_info->tmac_icmp);
+ tmp_stats[i++] =
+ (u64)le32_to_cpu(stat_info->tmac_rst_tcp_oflow) << 32 |
+ le32_to_cpu(stat_info->tmac_rst_tcp);
tmp_stats[i++] = le64_to_cpu(stat_info->tmac_tcp);
- tmp_stats[i++] = le32_to_cpu(stat_info->tmac_udp);
- tmp_stats[i++] = le32_to_cpu(stat_info->rmac_vld_frms);
- tmp_stats[i++] = le32_to_cpu(stat_info->rmac_data_octets);
+ tmp_stats[i++] = (u64)le32_to_cpu(stat_info->tmac_udp_oflow) << 32 |
+ le32_to_cpu(stat_info->tmac_udp);
+ tmp_stats[i++] =
+ (u64)le32_to_cpu(stat_info->rmac_vld_frms_oflow) << 32 |
+ le32_to_cpu(stat_info->rmac_vld_frms);
+ tmp_stats[i++] =
+ (u64)le32_to_cpu(stat_info->rmac_data_octets_oflow) << 32 |
+ le32_to_cpu(stat_info->rmac_data_octets);
tmp_stats[i++] = le64_to_cpu(stat_info->rmac_fcs_err_frms);
tmp_stats[i++] = le64_to_cpu(stat_info->rmac_drop_frms);
- tmp_stats[i++] = le32_to_cpu(stat_info->rmac_vld_mcst_frms);
- tmp_stats[i++] = le32_to_cpu(stat_info->rmac_vld_bcst_frms);
+ tmp_stats[i++] =
+ (u64)le32_to_cpu(stat_info->rmac_vld_mcst_frms_oflow) << 32 |
+ le32_to_cpu(stat_info->rmac_vld_mcst_frms);
+ tmp_stats[i++] =
+ (u64)le32_to_cpu(stat_info->rmac_vld_bcst_frms_oflow) << 32 |
+ le32_to_cpu(stat_info->rmac_vld_bcst_frms);
tmp_stats[i++] = le32_to_cpu(stat_info->rmac_in_rng_len_err_frms);
tmp_stats[i++] = le64_to_cpu(stat_info->rmac_long_frms);
tmp_stats[i++] = le64_to_cpu(stat_info->rmac_pause_ctrl_frms);
- tmp_stats[i++] = le32_to_cpu(stat_info->rmac_discarded_frms);
- tmp_stats[i++] = le32_to_cpu(stat_info->rmac_usized_frms);
- tmp_stats[i++] = le32_to_cpu(stat_info->rmac_osized_frms);
- tmp_stats[i++] = le32_to_cpu(stat_info->rmac_frag_frms);
- tmp_stats[i++] = le32_to_cpu(stat_info->rmac_jabber_frms);
- tmp_stats[i++] = le32_to_cpu(stat_info->rmac_ip);
+ tmp_stats[i++] =
+ (u64)le32_to_cpu(stat_info->rmac_discarded_frms_oflow) << 32 |
+ le32_to_cpu(stat_info->rmac_discarded_frms);
+ tmp_stats[i++] =
+ (u64)le32_to_cpu(stat_info->rmac_usized_frms_oflow) << 32 |
+ le32_to_cpu(stat_info->rmac_usized_frms);
+ tmp_stats[i++] =
+ (u64)le32_to_cpu(stat_info->rmac_osized_frms_oflow) << 32 |
+ le32_to_cpu(stat_info->rmac_osized_frms);
+ tmp_stats[i++] =
+ (u64)le32_to_cpu(stat_info->rmac_frag_frms_oflow) << 32 |
+ le32_to_cpu(stat_info->rmac_frag_frms);
+ tmp_stats[i++] =
+ (u64)le32_to_cpu(stat_info->rmac_jabber_frms_oflow) << 32 |
+ le32_to_cpu(stat_info->rmac_jabber_frms);
+ tmp_stats[i++] = (u64)le32_to_cpu(stat_info->rmac_ip_oflow) << 32 |
+ le32_to_cpu(stat_info->rmac_ip);
tmp_stats[i++] = le64_to_cpu(stat_info->rmac_ip_octets);
tmp_stats[i++] = le32_to_cpu(stat_info->rmac_hdr_err_ip);
- tmp_stats[i++] = le32_to_cpu(stat_info->rmac_drop_ip);
- tmp_stats[i++] = le32_to_cpu(stat_info->rmac_icmp);
+ tmp_stats[i++] = (u64)le32_to_cpu(stat_info->rmac_drop_ip_oflow) << 32 |
+ le32_to_cpu(stat_info->rmac_drop_ip);
+ tmp_stats[i++] = (u64)le32_to_cpu(stat_info->rmac_icmp_oflow) << 32 |
+ le32_to_cpu(stat_info->rmac_icmp);
tmp_stats[i++] = le64_to_cpu(stat_info->rmac_tcp);
- tmp_stats[i++] = le32_to_cpu(stat_info->rmac_udp);
- tmp_stats[i++] = le32_to_cpu(stat_info->rmac_err_drp_udp);
- tmp_stats[i++] = le32_to_cpu(stat_info->rmac_pause_cnt);
- tmp_stats[i++] = le32_to_cpu(stat_info->rmac_accepted_ip);
+ tmp_stats[i++] = (u64)le32_to_cpu(stat_info->rmac_udp_oflow) << 32 |
+ le32_to_cpu(stat_info->rmac_udp);
+ tmp_stats[i++] =
+ (u64)le32_to_cpu(stat_info->rmac_err_drp_udp_oflow) << 32 |
+ le32_to_cpu(stat_info->rmac_err_drp_udp);
+ tmp_stats[i++] =
+ (u64)le32_to_cpu(stat_info->rmac_pause_cnt_oflow) << 32 |
+ le32_to_cpu(stat_info->rmac_pause_cnt);
+ tmp_stats[i++] =
+ (u64)le32_to_cpu(stat_info->rmac_accepted_ip_oflow) << 32 |
+ le32_to_cpu(stat_info->rmac_accepted_ip);
tmp_stats[i++] = le32_to_cpu(stat_info->rmac_err_tcp);
+ tmp_stats[i++] = 0;
+ tmp_stats[i++] = stat_info->sw_stat.single_ecc_errs;
+ tmp_stats[i++] = stat_info->sw_stat.double_ecc_errs;
}
-static int s2io_ethtool_get_regs_len(struct net_device *dev)
+int s2io_ethtool_get_regs_len(struct net_device *dev)
{
return (XENA_REG_SPACE);
}
-static u32 s2io_ethtool_get_rx_csum(struct net_device * dev)
+u32 s2io_ethtool_get_rx_csum(struct net_device * dev)
{
nic_t *sp = dev->priv;
return (sp->rx_csum);
}
-
-static int s2io_ethtool_set_rx_csum(struct net_device *dev, u32 data)
+int s2io_ethtool_set_rx_csum(struct net_device *dev, u32 data)
{
nic_t *sp = dev->priv;
@@ -3975,19 +4578,17 @@ static int s2io_ethtool_set_rx_csum(struct net_device *dev, u32 data)
return 0;
}
-
-static int s2io_get_eeprom_len(struct net_device *dev)
+int s2io_get_eeprom_len(struct net_device *dev)
{
return (XENA_EEPROM_SPACE);
}
-static int s2io_ethtool_self_test_count(struct net_device *dev)
+int s2io_ethtool_self_test_count(struct net_device *dev)
{
return (S2IO_TEST_LEN);
}
-
-static void s2io_ethtool_get_strings(struct net_device *dev,
- u32 stringset, u8 * data)
+void s2io_ethtool_get_strings(struct net_device *dev,
+ u32 stringset, u8 * data)
{
switch (stringset) {
case ETH_SS_TEST:
@@ -3998,13 +4599,12 @@ static void s2io_ethtool_get_strings(struct net_device *dev,
sizeof(ethtool_stats_keys));
}
}
-
static int s2io_ethtool_get_stats_count(struct net_device *dev)
{
return (S2IO_STAT_LEN);
}
-static int s2io_ethtool_op_set_tx_csum(struct net_device *dev, u32 data)
+int s2io_ethtool_op_set_tx_csum(struct net_device *dev, u32 data)
{
if (data)
dev->features |= NETIF_F_IP_CSUM;
@@ -4046,21 +4646,18 @@ static struct ethtool_ops netdev_ethtool_ops = {
};
/**
- * s2io_ioctl - Entry point for the Ioctl
+ * s2io_ioctl - Entry point for the Ioctl
* @dev : Device pointer.
* @ifr : An IOCTL specefic structure, that can contain a pointer to
* a proprietary structure used to pass information to the driver.
* @cmd : This is used to distinguish between the different commands that
* can be passed to the IOCTL functions.
* Description:
- * This function has support for ethtool, adding multiple MAC addresses on
- * the NIC and some DBG commands for the util tool.
- * Return value:
- * Currently the IOCTL supports no operations, hence by default this
- * function returns OP NOT SUPPORTED value.
+ * Currently there are no special functionality supported in IOCTL, hence
+ * function always return EOPNOTSUPPORTED
*/
-static int s2io_ioctl(struct net_device *dev, struct ifreq *rq, int cmd)
+int s2io_ioctl(struct net_device *dev, struct ifreq *rq, int cmd)
{
return -EOPNOTSUPP;
}
@@ -4076,17 +4673,9 @@ static int s2io_ioctl(struct net_device *dev, struct ifreq *rq, int cmd)
* file on failure.
*/
-static int s2io_change_mtu(struct net_device *dev, int new_mtu)
+int s2io_change_mtu(struct net_device *dev, int new_mtu)
{
nic_t *sp = dev->priv;
- XENA_dev_config_t __iomem *bar0 = sp->bar0;
- register u64 val64;
-
- if (netif_running(dev)) {
- DBG_PRINT(ERR_DBG, "%s: Must be stopped to ", dev->name);
- DBG_PRINT(ERR_DBG, "change its MTU \n");
- return -EBUSY;
- }
if ((new_mtu < MIN_MTU) || (new_mtu > S2IO_JUMBO_SIZE)) {
DBG_PRINT(ERR_DBG, "%s: MTU size is invalid.\n",
@@ -4094,11 +4683,22 @@ static int s2io_change_mtu(struct net_device *dev, int new_mtu)
return -EPERM;
}
- /* Set the new MTU into the PYLD register of the NIC */
- val64 = new_mtu;
- writeq(vBIT(val64, 2, 14), &bar0->rmac_max_pyld_len);
-
dev->mtu = new_mtu;
+ if (netif_running(dev)) {
+ s2io_card_down(sp);
+ netif_stop_queue(dev);
+ if (s2io_card_up(sp)) {
+ DBG_PRINT(ERR_DBG, "%s: Device bring up failed\n",
+ __FUNCTION__);
+ }
+ if (netif_queue_stopped(dev))
+ netif_wake_queue(dev);
+ } else { /* Device is down */
+ XENA_dev_config_t __iomem *bar0 = sp->bar0;
+ u64 val64 = new_mtu;
+
+ writeq(vBIT(val64, 2, 14), &bar0->rmac_max_pyld_len);
+ }
return 0;
}
@@ -4108,9 +4708,9 @@ static int s2io_change_mtu(struct net_device *dev, int new_mtu)
* @dev_adr : address of the device structure in dma_addr_t format.
* Description:
* This is the tasklet or the bottom half of the ISR. This is
- * an extension of the ISR which is scheduled by the scheduler to be run
+ * an extension of the ISR which is scheduled by the scheduler to be run
* when the load on the CPU is low. All low priority tasks of the ISR can
- * be pushed into the tasklet. For now the tasklet is used only to
+ * be pushed into the tasklet. For now the tasklet is used only to
* replenish the Rx buffers in the Rx buffer descriptors.
* Return value:
* void.
@@ -4166,19 +4766,22 @@ static void s2io_set_link(unsigned long data)
}
subid = nic->pdev->subsystem_device;
- /*
- * Allow a small delay for the NICs self initiated
- * cleanup to complete.
- */
- msleep(100);
+ if (s2io_link_fault_indication(nic) == MAC_RMAC_ERR_TIMER) {
+ /*
+ * Allow a small delay for the NICs self initiated
+ * cleanup to complete.
+ */
+ msleep(100);
+ }
val64 = readq(&bar0->adapter_status);
- if (verify_xena_quiescence(val64, nic->device_enabled_once)) {
+ if (verify_xena_quiescence(nic, val64, nic->device_enabled_once)) {
if (LINK_IS_UP(val64)) {
val64 = readq(&bar0->adapter_control);
val64 |= ADAPTER_CNTL_EN;
writeq(val64, &bar0->adapter_control);
- if (CARDS_WITH_FAULTY_LINK_INDICATORS(subid)) {
+ if (CARDS_WITH_FAULTY_LINK_INDICATORS(nic->device_type,
+ subid)) {
val64 = readq(&bar0->gpio_control);
val64 |= GPIO_CTRL_GPIO_0;
writeq(val64, &bar0->gpio_control);
@@ -4187,20 +4790,24 @@ static void s2io_set_link(unsigned long data)
val64 |= ADAPTER_LED_ON;
writeq(val64, &bar0->adapter_control);
}
- val64 = readq(&bar0->adapter_status);
- if (!LINK_IS_UP(val64)) {
- DBG_PRINT(ERR_DBG, "%s:", dev->name);
- DBG_PRINT(ERR_DBG, " Link down");
- DBG_PRINT(ERR_DBG, "after ");
- DBG_PRINT(ERR_DBG, "enabling ");
- DBG_PRINT(ERR_DBG, "device \n");
+ if (s2io_link_fault_indication(nic) ==
+ MAC_RMAC_ERR_TIMER) {
+ val64 = readq(&bar0->adapter_status);
+ if (!LINK_IS_UP(val64)) {
+ DBG_PRINT(ERR_DBG, "%s:", dev->name);
+ DBG_PRINT(ERR_DBG, " Link down");
+ DBG_PRINT(ERR_DBG, "after ");
+ DBG_PRINT(ERR_DBG, "enabling ");
+ DBG_PRINT(ERR_DBG, "device \n");
+ }
}
if (nic->device_enabled_once == FALSE) {
nic->device_enabled_once = TRUE;
}
s2io_link(nic, LINK_UP);
} else {
- if (CARDS_WITH_FAULTY_LINK_INDICATORS(subid)) {
+ if (CARDS_WITH_FAULTY_LINK_INDICATORS(nic->device_type,
+ subid)) {
val64 = readq(&bar0->gpio_control);
val64 &= ~GPIO_CTRL_GPIO_0;
writeq(val64, &bar0->gpio_control);
@@ -4223,9 +4830,11 @@ static void s2io_card_down(nic_t * sp)
unsigned long flags;
register u64 val64 = 0;
+ del_timer_sync(&sp->alarm_timer);
/* If s2io_set_link task is executing, wait till it completes. */
- while (test_and_set_bit(0, &(sp->link_state)))
+ while (test_and_set_bit(0, &(sp->link_state))) {
msleep(50);
+ }
atomic_set(&sp->card_state, CARD_DOWN);
/* disable Tx and Rx traffic on the NIC */
@@ -4237,7 +4846,7 @@ static void s2io_card_down(nic_t * sp)
/* Check if the device is Quiescent and then Reset the NIC */
do {
val64 = readq(&bar0->adapter_status);
- if (verify_xena_quiescence(val64, sp->device_enabled_once)) {
+ if (verify_xena_quiescence(sp, val64, sp->device_enabled_once)) {
break;
}
@@ -4251,14 +4860,27 @@ static void s2io_card_down(nic_t * sp)
break;
}
} while (1);
- spin_lock_irqsave(&sp->tx_lock, flags);
s2io_reset(sp);
- /* Free all unused Tx and Rx buffers */
+ /* Waiting till all Interrupt handlers are complete */
+ cnt = 0;
+ do {
+ msleep(10);
+ if (!atomic_read(&sp->isr_cnt))
+ break;
+ cnt++;
+ } while(cnt < 5);
+
+ spin_lock_irqsave(&sp->tx_lock, flags);
+ /* Free all Tx buffers */
free_tx_buffers(sp);
+ spin_unlock_irqrestore(&sp->tx_lock, flags);
+
+ /* Free all Rx buffers */
+ spin_lock_irqsave(&sp->rx_lock, flags);
free_rx_buffers(sp);
+ spin_unlock_irqrestore(&sp->rx_lock, flags);
- spin_unlock_irqrestore(&sp->tx_lock, flags);
clear_bit(0, &(sp->link_state));
}
@@ -4276,8 +4898,8 @@ static int s2io_card_up(nic_t * sp)
return -ENODEV;
}
- /*
- * Initializing the Rx buffers. For now we are considering only 1
+ /*
+ * Initializing the Rx buffers. For now we are considering only 1
* Rx ring and initializing buffers into 30 Rx blocks
*/
mac_control = &sp->mac_control;
@@ -4311,16 +4933,18 @@ static int s2io_card_up(nic_t * sp)
return -ENODEV;
}
+ S2IO_TIMER_CONF(sp->alarm_timer, s2io_alarm_handle, sp, (HZ/2));
+
atomic_set(&sp->card_state, CARD_UP);
return 0;
}
-/**
+/**
* s2io_restart_nic - Resets the NIC.
* @data : long pointer to the device private structure
* Description:
* This function is scheduled to be run by the s2io_tx_watchdog
- * function after 0.5 secs to reset the NIC. The idea is to reduce
+ * function after 0.5 secs to reset the NIC. The idea is to reduce
* the run time of the watch dog routine which is run holding a
* spin lock.
*/
@@ -4338,10 +4962,11 @@ static void s2io_restart_nic(unsigned long data)
netif_wake_queue(dev);
DBG_PRINT(ERR_DBG, "%s: was reset by Tx watchdog timer\n",
dev->name);
+
}
-/**
- * s2io_tx_watchdog - Watchdog for transmit side.
+/**
+ * s2io_tx_watchdog - Watchdog for transmit side.
* @dev : Pointer to net device structure
* Description:
* This function is triggered if the Tx Queue is stopped
@@ -4369,7 +4994,7 @@ static void s2io_tx_watchdog(struct net_device *dev)
* @len : length of the packet
* @cksum : FCS checksum of the frame.
* @ring_no : the ring from which this RxD was extracted.
- * Description:
+ * Description:
* This function is called by the Tx interrupt serivce routine to perform
* some OS related operations on the SKB before passing it to the upper
* layers. It mainly checks if the checksum is OK, if so adds it to the
@@ -4379,35 +5004,68 @@ static void s2io_tx_watchdog(struct net_device *dev)
* Return value:
* SUCCESS on success and -1 on failure.
*/
-#ifndef CONFIG_2BUFF_MODE
-static int rx_osm_handler(nic_t * sp, u16 len, RxD_t * rxdp, int ring_no)
-#else
-static int rx_osm_handler(nic_t * sp, RxD_t * rxdp, int ring_no,
- buffAdd_t * ba)
-#endif
+static int rx_osm_handler(ring_info_t *ring_data, RxD_t * rxdp)
{
+ nic_t *sp = ring_data->nic;
struct net_device *dev = (struct net_device *) sp->dev;
- struct sk_buff *skb =
- (struct sk_buff *) ((unsigned long) rxdp->Host_Control);
+ struct sk_buff *skb = (struct sk_buff *)
+ ((unsigned long) rxdp->Host_Control);
+ int ring_no = ring_data->ring_no;
u16 l3_csum, l4_csum;
#ifdef CONFIG_2BUFF_MODE
- int buf0_len, buf2_len;
+ int buf0_len = RXD_GET_BUFFER0_SIZE(rxdp->Control_2);
+ int buf2_len = RXD_GET_BUFFER2_SIZE(rxdp->Control_2);
+ int get_block = ring_data->rx_curr_get_info.block_index;
+ int get_off = ring_data->rx_curr_get_info.offset;
+ buffAdd_t *ba = &ring_data->ba[get_block][get_off];
unsigned char *buff;
+#else
+ u16 len = (u16) ((RXD_GET_BUFFER0_SIZE(rxdp->Control_2)) >> 48);;
#endif
+ skb->dev = dev;
+ if (rxdp->Control_1 & RXD_T_CODE) {
+ unsigned long long err = rxdp->Control_1 & RXD_T_CODE;
+ DBG_PRINT(ERR_DBG, "%s: Rx error Value: 0x%llx\n",
+ dev->name, err);
+ dev_kfree_skb(skb);
+ sp->stats.rx_crc_errors++;
+ atomic_dec(&sp->rx_bufs_left[ring_no]);
+ rxdp->Host_Control = 0;
+ return 0;
+ }
- l3_csum = RXD_GET_L3_CKSUM(rxdp->Control_1);
- if ((rxdp->Control_1 & TCP_OR_UDP_FRAME) && (sp->rx_csum)) {
+ /* Updating statistics */
+ rxdp->Host_Control = 0;
+ sp->rx_pkt_count++;
+ sp->stats.rx_packets++;
+#ifndef CONFIG_2BUFF_MODE
+ sp->stats.rx_bytes += len;
+#else
+ sp->stats.rx_bytes += buf0_len + buf2_len;
+#endif
+
+#ifndef CONFIG_2BUFF_MODE
+ skb_put(skb, len);
+#else
+ buff = skb_push(skb, buf0_len);
+ memcpy(buff, ba->ba_0, buf0_len);
+ skb_put(skb, buf2_len);
+#endif
+
+ if ((rxdp->Control_1 & TCP_OR_UDP_FRAME) &&
+ (sp->rx_csum)) {
+ l3_csum = RXD_GET_L3_CKSUM(rxdp->Control_1);
l4_csum = RXD_GET_L4_CKSUM(rxdp->Control_1);
if ((l3_csum == L3_CKSUM_OK) && (l4_csum == L4_CKSUM_OK)) {
- /*
+ /*
* NIC verifies if the Checksum of the received
* frame is Ok or not and accordingly returns
* a flag in the RxD.
*/
skb->ip_summed = CHECKSUM_UNNECESSARY;
} else {
- /*
- * Packet with erroneous checksum, let the
+ /*
+ * Packet with erroneous checksum, let the
* upper layers deal with it.
*/
skb->ip_summed = CHECKSUM_NONE;
@@ -4416,44 +5074,26 @@ static int rx_osm_handler(nic_t * sp, RxD_t * rxdp, int ring_no,
skb->ip_summed = CHECKSUM_NONE;
}
- if (rxdp->Control_1 & RXD_T_CODE) {
- unsigned long long err = rxdp->Control_1 & RXD_T_CODE;
- DBG_PRINT(ERR_DBG, "%s: Rx error Value: 0x%llx\n",
- dev->name, err);
- }
-#ifdef CONFIG_2BUFF_MODE
- buf0_len = RXD_GET_BUFFER0_SIZE(rxdp->Control_2);
- buf2_len = RXD_GET_BUFFER2_SIZE(rxdp->Control_2);
-#endif
-
- skb->dev = dev;
-#ifndef CONFIG_2BUFF_MODE
- skb_put(skb, len);
- skb->protocol = eth_type_trans(skb, dev);
-#else
- buff = skb_push(skb, buf0_len);
- memcpy(buff, ba->ba_0, buf0_len);
- skb_put(skb, buf2_len);
skb->protocol = eth_type_trans(skb, dev);
-#endif
-
#ifdef CONFIG_S2IO_NAPI
- netif_receive_skb(skb);
+ if (sp->vlgrp && RXD_GET_VLAN_TAG(rxdp->Control_2)) {
+ /* Queueing the vlan frame to the upper layer */
+ vlan_hwaccel_receive_skb(skb, sp->vlgrp,
+ RXD_GET_VLAN_TAG(rxdp->Control_2));
+ } else {
+ netif_receive_skb(skb);
+ }
#else
- netif_rx(skb);
+ if (sp->vlgrp && RXD_GET_VLAN_TAG(rxdp->Control_2)) {
+ /* Queueing the vlan frame to the upper layer */
+ vlan_hwaccel_rx(skb, sp->vlgrp,
+ RXD_GET_VLAN_TAG(rxdp->Control_2));
+ } else {
+ netif_rx(skb);
+ }
#endif
-
dev->last_rx = jiffies;
- sp->rx_pkt_count++;
- sp->stats.rx_packets++;
-#ifndef CONFIG_2BUFF_MODE
- sp->stats.rx_bytes += len;
-#else
- sp->stats.rx_bytes += buf0_len + buf2_len;
-#endif
-
atomic_dec(&sp->rx_bufs_left[ring_no]);
- rxdp->Host_Control = 0;
return SUCCESS;
}
@@ -4464,13 +5104,13 @@ static int rx_osm_handler(nic_t * sp, RxD_t * rxdp, int ring_no,
* @link : inidicates whether link is UP/DOWN.
* Description:
* This function stops/starts the Tx queue depending on whether the link
- * status of the NIC is is down or up. This is called by the Alarm
- * interrupt handler whenever a link change interrupt comes up.
+ * status of the NIC is is down or up. This is called by the Alarm
+ * interrupt handler whenever a link change interrupt comes up.
* Return value:
* void.
*/
-static void s2io_link(nic_t * sp, int link)
+void s2io_link(nic_t * sp, int link)
{
struct net_device *dev = (struct net_device *) sp->dev;
@@ -4487,8 +5127,25 @@ static void s2io_link(nic_t * sp, int link)
}
/**
- * s2io_init_pci -Initialization of PCI and PCI-X configuration registers .
- * @sp : private member of the device structure, which is a pointer to the
+ * get_xena_rev_id - to identify revision ID of xena.
+ * @pdev : PCI Dev structure
+ * Description:
+ * Function to identify the Revision ID of xena.
+ * Return value:
+ * returns the revision ID of the device.
+ */
+
+int get_xena_rev_id(struct pci_dev *pdev)
+{
+ u8 id = 0;
+ int ret;
+ ret = pci_read_config_byte(pdev, PCI_REVISION_ID, (u8 *) & id);
+ return id;
+}
+
+/**
+ * s2io_init_pci -Initialization of PCI and PCI-X configuration registers .
+ * @sp : private member of the device structure, which is a pointer to the
* s2io_nic structure.
* Description:
* This function initializes a few of the PCI and PCI-X configuration registers
@@ -4499,15 +5156,15 @@ static void s2io_link(nic_t * sp, int link)
static void s2io_init_pci(nic_t * sp)
{
- u16 pci_cmd = 0;
+ u16 pci_cmd = 0, pcix_cmd = 0;
/* Enable Data Parity Error Recovery in PCI-X command register. */
pci_read_config_word(sp->pdev, PCIX_COMMAND_REGISTER,
- &(sp->pcix_cmd));
+ &(pcix_cmd));
pci_write_config_word(sp->pdev, PCIX_COMMAND_REGISTER,
- (sp->pcix_cmd | 1));
+ (pcix_cmd | 1));
pci_read_config_word(sp->pdev, PCIX_COMMAND_REGISTER,
- &(sp->pcix_cmd));
+ &(pcix_cmd));
/* Set the PErr Response bit in PCI command register. */
pci_read_config_word(sp->pdev, PCI_COMMAND, &pci_cmd);
@@ -4515,53 +5172,43 @@ static void s2io_init_pci(nic_t * sp)
(pci_cmd | PCI_COMMAND_PARITY));
pci_read_config_word(sp->pdev, PCI_COMMAND, &pci_cmd);
- /* Set MMRB count to 1024 in PCI-X Command register. */
- sp->pcix_cmd &= 0xFFF3;
- pci_write_config_word(sp->pdev, PCIX_COMMAND_REGISTER, (sp->pcix_cmd | (0x1 << 2))); /* MMRBC 1K */
- pci_read_config_word(sp->pdev, PCIX_COMMAND_REGISTER,
- &(sp->pcix_cmd));
-
- /* Setting Maximum outstanding splits based on system type. */
- sp->pcix_cmd &= 0xFF8F;
-
- sp->pcix_cmd |= XENA_MAX_OUTSTANDING_SPLITS(0x1); /* 2 splits. */
- pci_write_config_word(sp->pdev, PCIX_COMMAND_REGISTER,
- sp->pcix_cmd);
- pci_read_config_word(sp->pdev, PCIX_COMMAND_REGISTER,
- &(sp->pcix_cmd));
/* Forcibly disabling relaxed ordering capability of the card. */
- sp->pcix_cmd &= 0xfffd;
+ pcix_cmd &= 0xfffd;
pci_write_config_word(sp->pdev, PCIX_COMMAND_REGISTER,
- sp->pcix_cmd);
+ pcix_cmd);
pci_read_config_word(sp->pdev, PCIX_COMMAND_REGISTER,
- &(sp->pcix_cmd));
+ &(pcix_cmd));
}
MODULE_AUTHOR("Raghavendra Koushik <raghavendra.koushik@neterion.com>");
MODULE_LICENSE("GPL");
module_param(tx_fifo_num, int, 0);
-module_param_array(tx_fifo_len, int, NULL, 0);
module_param(rx_ring_num, int, 0);
-module_param_array(rx_ring_sz, int, NULL, 0);
-module_param(Stats_refresh_time, int, 0);
+module_param_array(tx_fifo_len, uint, NULL, 0);
+module_param_array(rx_ring_sz, uint, NULL, 0);
+module_param_array(rts_frm_len, uint, NULL, 0);
+module_param(use_continuous_tx_intrs, int, 1);
module_param(rmac_pause_time, int, 0);
module_param(mc_pause_threshold_q0q3, int, 0);
module_param(mc_pause_threshold_q4q7, int, 0);
module_param(shared_splits, int, 0);
module_param(tmac_util_period, int, 0);
module_param(rmac_util_period, int, 0);
+module_param(bimodal, bool, 0);
#ifndef CONFIG_S2IO_NAPI
module_param(indicate_max_pkts, int, 0);
#endif
+module_param(rxsync_frequency, int, 0);
+
/**
- * s2io_init_nic - Initialization of the adapter .
+ * s2io_init_nic - Initialization of the adapter .
* @pdev : structure containing the PCI related information of the device.
* @pre: List of PCI devices supported by the driver listed in s2io_tbl.
* Description:
* The function initializes an adapter identified by the pci_dec structure.
- * All OS related initialization including memory and device structure and
- * initlaization of the device private variable is done. Also the swapper
- * control register is initialized to enable read and write into the I/O
+ * All OS related initialization including memory and device structure and
+ * initlaization of the device private variable is done. Also the swapper
+ * control register is initialized to enable read and write into the I/O
* registers of the device.
* Return value:
* returns 0 on success and negative on failure.
@@ -4572,7 +5219,6 @@ s2io_init_nic(struct pci_dev *pdev, const struct pci_device_id *pre)
{
nic_t *sp;
struct net_device *dev;
- char *dev_name = "S2IO 10GE NIC";
int i, j, ret;
int dma_flag = FALSE;
u32 mac_up, mac_down;
@@ -4581,10 +5227,11 @@ s2io_init_nic(struct pci_dev *pdev, const struct pci_device_id *pre)
u16 subid;
mac_info_t *mac_control;
struct config_param *config;
+ int mode;
-
- DBG_PRINT(ERR_DBG, "Loading S2IO driver with %s\n",
- s2io_driver_version);
+#ifdef CONFIG_S2IO_NAPI
+ DBG_PRINT(ERR_DBG, "NAPI support has been enabled\n");
+#endif
if ((ret = pci_enable_device(pdev))) {
DBG_PRINT(ERR_DBG,
@@ -4595,7 +5242,6 @@ s2io_init_nic(struct pci_dev *pdev, const struct pci_device_id *pre)
if (!pci_set_dma_mask(pdev, DMA_64BIT_MASK)) {
DBG_PRINT(INIT_DBG, "s2io_init_nic: Using 64bit DMA\n");
dma_flag = TRUE;
-
if (pci_set_consistent_dma_mask
(pdev, DMA_64BIT_MASK)) {
DBG_PRINT(ERR_DBG,
@@ -4635,34 +5281,41 @@ s2io_init_nic(struct pci_dev *pdev, const struct pci_device_id *pre)
memset(sp, 0, sizeof(nic_t));
sp->dev = dev;
sp->pdev = pdev;
- sp->vendor_id = pdev->vendor;
- sp->device_id = pdev->device;
sp->high_dma_flag = dma_flag;
- sp->irq = pdev->irq;
sp->device_enabled_once = FALSE;
- strcpy(sp->name, dev_name);
+
+ if ((pdev->device == PCI_DEVICE_ID_HERC_WIN) ||
+ (pdev->device == PCI_DEVICE_ID_HERC_UNI))
+ sp->device_type = XFRAME_II_DEVICE;
+ else
+ sp->device_type = XFRAME_I_DEVICE;
/* Initialize some PCI/PCI-X fields of the NIC. */
s2io_init_pci(sp);
- /*
+ /*
* Setting the device configuration parameters.
- * Most of these parameters can be specified by the user during
- * module insertion as they are module loadable parameters. If
- * these parameters are not not specified during load time, they
+ * Most of these parameters can be specified by the user during
+ * module insertion as they are module loadable parameters. If
+ * these parameters are not not specified during load time, they
* are initialized with default values.
*/
mac_control = &sp->mac_control;
config = &sp->config;
/* Tx side parameters. */
- tx_fifo_len[0] = DEFAULT_FIFO_LEN; /* Default value. */
+ if (tx_fifo_len[0] == 0)
+ tx_fifo_len[0] = DEFAULT_FIFO_LEN; /* Default value. */
config->tx_fifo_num = tx_fifo_num;
for (i = 0; i < MAX_TX_FIFOS; i++) {
config->tx_cfg[i].fifo_len = tx_fifo_len[i];
config->tx_cfg[i].fifo_priority = i;
}
+ /* mapping the QoS priority to the configured fifos */
+ for (i = 0; i < MAX_TX_FIFOS; i++)
+ config->fifo_mapping[i] = fifo_map[config->tx_fifo_num][i];
+
config->tx_intr_type = TXD_INT_TYPE_UTILZ;
for (i = 0; i < config->tx_fifo_num; i++) {
config->tx_cfg[i].f_no_snoop =
@@ -4675,7 +5328,8 @@ s2io_init_nic(struct pci_dev *pdev, const struct pci_device_id *pre)
config->max_txds = MAX_SKB_FRAGS;
/* Rx side parameters. */
- rx_ring_sz[0] = SMALL_BLK_CNT; /* Default value. */
+ if (rx_ring_sz[0] == 0)
+ rx_ring_sz[0] = SMALL_BLK_CNT; /* Default value. */
config->rx_ring_num = rx_ring_num;
for (i = 0; i < MAX_RX_RINGS; i++) {
config->rx_cfg[i].num_rxd = rx_ring_sz[i] *
@@ -4699,10 +5353,13 @@ s2io_init_nic(struct pci_dev *pdev, const struct pci_device_id *pre)
for (i = 0; i < config->rx_ring_num; i++)
atomic_set(&sp->rx_bufs_left[i], 0);
+ /* Initialize the number of ISRs currently running */
+ atomic_set(&sp->isr_cnt, 0);
+
/* initialize the shared memory used by the NIC and the host */
if (init_shared_mem(sp)) {
DBG_PRINT(ERR_DBG, "%s: Memory allocation failed\n",
- dev->name);
+ __FUNCTION__);
ret = -ENOMEM;
goto mem_alloc_failed;
}
@@ -4743,13 +5400,17 @@ s2io_init_nic(struct pci_dev *pdev, const struct pci_device_id *pre)
dev->do_ioctl = &s2io_ioctl;
dev->change_mtu = &s2io_change_mtu;
SET_ETHTOOL_OPS(dev, &netdev_ethtool_ops);
+ dev->features |= NETIF_F_HW_VLAN_TX | NETIF_F_HW_VLAN_RX;
+ dev->vlan_rx_register = s2io_vlan_rx_register;
+ dev->vlan_rx_kill_vid = (void *)s2io_vlan_rx_kill_vid;
+
/*
* will use eth_mac_addr() for dev->set_mac_address
* mac address will be set every time dev->open() is called
*/
-#ifdef CONFIG_S2IO_NAPI
+#if defined(CONFIG_S2IO_NAPI)
dev->poll = s2io_poll;
- dev->weight = 90;
+ dev->weight = 32;
#endif
dev->features |= NETIF_F_SG | NETIF_F_IP_CSUM;
@@ -4776,22 +5437,28 @@ s2io_init_nic(struct pci_dev *pdev, const struct pci_device_id *pre)
goto set_swap_failed;
}
- /* Fix for all "FFs" MAC address problems observed on Alpha platforms */
- fix_mac_address(sp);
- s2io_reset(sp);
+ /* Verify if the Herc works on the slot its placed into */
+ if (sp->device_type & XFRAME_II_DEVICE) {
+ mode = s2io_verify_pci_mode(sp);
+ if (mode < 0) {
+ DBG_PRINT(ERR_DBG, "%s: ", __FUNCTION__);
+ DBG_PRINT(ERR_DBG, " Unsupported PCI bus mode\n");
+ ret = -EBADSLT;
+ goto set_swap_failed;
+ }
+ }
- /*
- * Setting swapper control on the NIC, so the MAC address can be read.
- */
- if (s2io_set_swapper(sp)) {
- DBG_PRINT(ERR_DBG,
- "%s: S2IO: swapper settings are wrong\n",
- dev->name);
- ret = -EAGAIN;
- goto set_swap_failed;
+ /* Not needed for Herc */
+ if (sp->device_type & XFRAME_I_DEVICE) {
+ /*
+ * Fix for all "FFs" MAC address problems observed on
+ * Alpha platforms
+ */
+ fix_mac_address(sp);
+ s2io_reset(sp);
}
- /*
+ /*
* MAC address initialization.
* For now only one mac address will be read and used.
*/
@@ -4814,37 +5481,28 @@ s2io_init_nic(struct pci_dev *pdev, const struct pci_device_id *pre)
sp->def_mac_addr[0].mac_addr[5] = (u8) (mac_down >> 16);
sp->def_mac_addr[0].mac_addr[4] = (u8) (mac_down >> 24);
- DBG_PRINT(INIT_DBG,
- "DEFAULT MAC ADDR:0x%02x-%02x-%02x-%02x-%02x-%02x\n",
- sp->def_mac_addr[0].mac_addr[0],
- sp->def_mac_addr[0].mac_addr[1],
- sp->def_mac_addr[0].mac_addr[2],
- sp->def_mac_addr[0].mac_addr[3],
- sp->def_mac_addr[0].mac_addr[4],
- sp->def_mac_addr[0].mac_addr[5]);
-
/* Set the factory defined MAC address initially */
dev->addr_len = ETH_ALEN;
memcpy(dev->dev_addr, sp->def_mac_addr, ETH_ALEN);
/*
- * Initialize the tasklet status and link state flags
- * and the card statte parameter
+ * Initialize the tasklet status and link state flags
+ * and the card state parameter
*/
atomic_set(&(sp->card_state), 0);
sp->tasklet_status = 0;
sp->link_state = 0;
-
/* Initialize spinlocks */
spin_lock_init(&sp->tx_lock);
#ifndef CONFIG_S2IO_NAPI
spin_lock_init(&sp->put_lock);
#endif
+ spin_lock_init(&sp->rx_lock);
- /*
- * SXE-002: Configure link and activity LED to init state
- * on driver load.
+ /*
+ * SXE-002: Configure link and activity LED to init state
+ * on driver load.
*/
subid = sp->pdev->subsystem_device;
if ((subid & 0xFF) >= 0x07) {
@@ -4864,13 +5522,61 @@ s2io_init_nic(struct pci_dev *pdev, const struct pci_device_id *pre)
goto register_failed;
}
- /*
- * Make Link state as off at this point, when the Link change
- * interrupt comes the state will be automatically changed to
+ if (sp->device_type & XFRAME_II_DEVICE) {
+ DBG_PRINT(ERR_DBG, "%s: Neterion Xframe II 10GbE adapter ",
+ dev->name);
+ DBG_PRINT(ERR_DBG, "(rev %d), Driver %s\n",
+ get_xena_rev_id(sp->pdev),
+ s2io_driver_version);
+ DBG_PRINT(ERR_DBG, "MAC ADDR: %02x:%02x:%02x:%02x:%02x:%02x\n",
+ sp->def_mac_addr[0].mac_addr[0],
+ sp->def_mac_addr[0].mac_addr[1],
+ sp->def_mac_addr[0].mac_addr[2],
+ sp->def_mac_addr[0].mac_addr[3],
+ sp->def_mac_addr[0].mac_addr[4],
+ sp->def_mac_addr[0].mac_addr[5]);
+ mode = s2io_print_pci_mode(sp);
+ if (mode < 0) {
+ DBG_PRINT(ERR_DBG, " Unsupported PCI bus mode ");
+ ret = -EBADSLT;
+ goto set_swap_failed;
+ }
+ } else {
+ DBG_PRINT(ERR_DBG, "%s: Neterion Xframe I 10GbE adapter ",
+ dev->name);
+ DBG_PRINT(ERR_DBG, "(rev %d), Driver %s\n",
+ get_xena_rev_id(sp->pdev),
+ s2io_driver_version);
+ DBG_PRINT(ERR_DBG, "MAC ADDR: %02x:%02x:%02x:%02x:%02x:%02x\n",
+ sp->def_mac_addr[0].mac_addr[0],
+ sp->def_mac_addr[0].mac_addr[1],
+ sp->def_mac_addr[0].mac_addr[2],
+ sp->def_mac_addr[0].mac_addr[3],
+ sp->def_mac_addr[0].mac_addr[4],
+ sp->def_mac_addr[0].mac_addr[5]);
+ }
+
+ /* Initialize device name */
+ strcpy(sp->name, dev->name);
+ if (sp->device_type & XFRAME_II_DEVICE)
+ strcat(sp->name, ": Neterion Xframe II 10GbE adapter");
+ else
+ strcat(sp->name, ": Neterion Xframe I 10GbE adapter");
+
+ /* Initialize bimodal Interrupts */
+ sp->config.bimodal = bimodal;
+ if (!(sp->device_type & XFRAME_II_DEVICE) && bimodal) {
+ sp->config.bimodal = 0;
+ DBG_PRINT(ERR_DBG,"%s:Bimodal intr not supported by Xframe I\n",
+ dev->name);
+ }
+
+ /*
+ * Make Link state as off at this point, when the Link change
+ * interrupt comes the state will be automatically changed to
* the right state.
*/
netif_carrier_off(dev);
- sp->last_link_state = LINK_DOWN;
return 0;
@@ -4891,11 +5597,11 @@ s2io_init_nic(struct pci_dev *pdev, const struct pci_device_id *pre)
}
/**
- * s2io_rem_nic - Free the PCI device
+ * s2io_rem_nic - Free the PCI device
* @pdev: structure containing the PCI related information of the device.
- * Description: This function is called by the Pci subsystem to release a
+ * Description: This function is called by the Pci subsystem to release a
* PCI device and free up all resource held up by the device. This could
- * be in response to a Hot plug event or when the driver is to be removed
+ * be in response to a Hot plug event or when the driver is to be removed
* from memory.
*/
@@ -4919,7 +5625,6 @@ static void __devexit s2io_rem_nic(struct pci_dev *pdev)
pci_disable_device(pdev);
pci_release_regions(pdev);
pci_set_drvdata(pdev, NULL);
-
free_netdev(dev);
}
@@ -4935,11 +5640,11 @@ int __init s2io_starter(void)
}
/**
- * s2io_closer - Cleanup routine for the driver
+ * s2io_closer - Cleanup routine for the driver
* Description: This function is the cleanup routine for the driver. It unregist * ers the driver.
*/
-static void s2io_closer(void)
+void s2io_closer(void)
{
pci_unregister_driver(&s2io_driver);
DBG_PRINT(INIT_DBG, "cleanup done\n");
diff --git a/drivers/net/s2io.h b/drivers/net/s2io.h
index 1711c8c3dc9..bc64d967f08 100644
--- a/drivers/net/s2io.h
+++ b/drivers/net/s2io.h
@@ -31,6 +31,9 @@
#define SUCCESS 0
#define FAILURE -1
+/* Maximum time to flicker LED when asked to identify NIC using ethtool */
+#define MAX_FLICKER_TIME 60000 /* 60 Secs */
+
/* Maximum outstanding splits to be configured into xena. */
typedef enum xena_max_outstanding_splits {
XENA_ONE_SPLIT_TRANSACTION = 0,
@@ -45,10 +48,10 @@ typedef enum xena_max_outstanding_splits {
#define XENA_MAX_OUTSTANDING_SPLITS(n) (n << 4)
/* OS concerned variables and constants */
-#define WATCH_DOG_TIMEOUT 5*HZ
-#define EFILL 0x1234
-#define ALIGN_SIZE 127
-#define PCIX_COMMAND_REGISTER 0x62
+#define WATCH_DOG_TIMEOUT 15*HZ
+#define EFILL 0x1234
+#define ALIGN_SIZE 127
+#define PCIX_COMMAND_REGISTER 0x62
/*
* Debug related variables.
@@ -61,7 +64,7 @@ typedef enum xena_max_outstanding_splits {
#define INTR_DBG 4
/* Global variable that defines the present debug level of the driver. */
-static int debug_level = ERR_DBG; /* Default level. */
+int debug_level = ERR_DBG; /* Default level. */
/* DEBUG message print. */
#define DBG_PRINT(dbg_level, args...) if(!(debug_level<dbg_level)) printk(args)
@@ -71,6 +74,12 @@ static int debug_level = ERR_DBG; /* Default level. */
#define L4_CKSUM_OK 0xFFFF
#define S2IO_JUMBO_SIZE 9600
+/* Driver statistics maintained by driver */
+typedef struct {
+ unsigned long long single_ecc_errs;
+ unsigned long long double_ecc_errs;
+} swStat_t;
+
/* The statistics block of Xena */
typedef struct stat_block {
/* Tx MAC statistics counters. */
@@ -186,12 +195,90 @@ typedef struct stat_block {
u32 rxd_rd_cnt;
u32 rxf_wr_cnt;
u32 txf_rd_cnt;
+
+/* Tx MAC statistics overflow counters. */
+ u32 tmac_data_octets_oflow;
+ u32 tmac_frms_oflow;
+ u32 tmac_bcst_frms_oflow;
+ u32 tmac_mcst_frms_oflow;
+ u32 tmac_ucst_frms_oflow;
+ u32 tmac_ttl_octets_oflow;
+ u32 tmac_any_err_frms_oflow;
+ u32 tmac_nucst_frms_oflow;
+ u64 tmac_vlan_frms;
+ u32 tmac_drop_ip_oflow;
+ u32 tmac_vld_ip_oflow;
+ u32 tmac_rst_tcp_oflow;
+ u32 tmac_icmp_oflow;
+ u32 tpa_unknown_protocol;
+ u32 tmac_udp_oflow;
+ u32 reserved_10;
+ u32 tpa_parse_failure;
+
+/* Rx MAC Statistics overflow counters. */
+ u32 rmac_data_octets_oflow;
+ u32 rmac_vld_frms_oflow;
+ u32 rmac_vld_bcst_frms_oflow;
+ u32 rmac_vld_mcst_frms_oflow;
+ u32 rmac_accepted_ucst_frms_oflow;
+ u32 rmac_ttl_octets_oflow;
+ u32 rmac_discarded_frms_oflow;
+ u32 rmac_accepted_nucst_frms_oflow;
+ u32 rmac_usized_frms_oflow;
+ u32 rmac_drop_events_oflow;
+ u32 rmac_frag_frms_oflow;
+ u32 rmac_osized_frms_oflow;
+ u32 rmac_ip_oflow;
+ u32 rmac_jabber_frms_oflow;
+ u32 rmac_icmp_oflow;
+ u32 rmac_drop_ip_oflow;
+ u32 rmac_err_drp_udp_oflow;
+ u32 rmac_udp_oflow;
+ u32 reserved_11;
+ u32 rmac_pause_cnt_oflow;
+ u64 rmac_ttl_1519_4095_frms;
+ u64 rmac_ttl_4096_8191_frms;
+ u64 rmac_ttl_8192_max_frms;
+ u64 rmac_ttl_gt_max_frms;
+ u64 rmac_osized_alt_frms;
+ u64 rmac_jabber_alt_frms;
+ u64 rmac_gt_max_alt_frms;
+ u64 rmac_vlan_frms;
+ u32 rmac_len_discard;
+ u32 rmac_fcs_discard;
+ u32 rmac_pf_discard;
+ u32 rmac_da_discard;
+ u32 rmac_red_discard;
+ u32 rmac_rts_discard;
+ u32 reserved_12;
+ u32 rmac_ingm_full_discard;
+ u32 reserved_13;
+ u32 rmac_accepted_ip_oflow;
+ u32 reserved_14;
+ u32 link_fault_cnt;
+ swStat_t sw_stat;
} StatInfo_t;
-/* Structures representing different init time configuration
+/*
+ * Structures representing different init time configuration
* parameters of the NIC.
*/
+#define MAX_TX_FIFOS 8
+#define MAX_RX_RINGS 8
+
+/* FIFO mappings for all possible number of fifos configured */
+int fifo_map[][MAX_TX_FIFOS] = {
+ {0, 0, 0, 0, 0, 0, 0, 0},
+ {0, 0, 0, 0, 1, 1, 1, 1},
+ {0, 0, 0, 1, 1, 1, 2, 2},
+ {0, 0, 1, 1, 2, 2, 3, 3},
+ {0, 0, 1, 1, 2, 2, 3, 4},
+ {0, 0, 1, 1, 2, 3, 4, 5},
+ {0, 0, 1, 2, 3, 4, 5, 6},
+ {0, 1, 2, 3, 4, 5, 6, 7},
+};
+
/* Maintains Per FIFO related information. */
typedef struct tx_fifo_config {
#define MAX_AVAILABLE_TXDS 8192
@@ -237,14 +324,14 @@ typedef struct rx_ring_config {
#define NO_SNOOP_RXD_BUFFER 0x02
} rx_ring_config_t;
-/* This structure provides contains values of the tunable parameters
- * of the H/W
+/* This structure provides contains values of the tunable parameters
+ * of the H/W
*/
struct config_param {
/* Tx Side */
u32 tx_fifo_num; /*Number of Tx FIFOs */
-#define MAX_TX_FIFOS 8
+ u8 fifo_mapping[MAX_TX_FIFOS];
tx_fifo_config_t tx_cfg[MAX_TX_FIFOS]; /*Per-Tx FIFO config */
u32 max_txds; /*Max no. of Tx buffer descriptor per TxDL */
u64 tx_intr_type;
@@ -252,10 +339,10 @@ struct config_param {
/* Rx Side */
u32 rx_ring_num; /*Number of receive rings */
-#define MAX_RX_RINGS 8
#define MAX_RX_BLOCKS_PER_RING 150
rx_ring_config_t rx_cfg[MAX_RX_RINGS]; /*Per-Rx Ring config */
+ u8 bimodal; /*Flag for setting bimodal interrupts*/
#define HEADER_ETHERNET_II_802_3_SIZE 14
#define HEADER_802_2_SIZE 3
@@ -269,6 +356,7 @@ struct config_param {
#define MAX_PYLD_JUMBO 9600
#define MAX_MTU_JUMBO (MAX_PYLD_JUMBO+18)
#define MAX_MTU_JUMBO_VLAN (MAX_PYLD_JUMBO+22)
+ u16 bus_speed;
};
/* Structure representing MAC Addrs */
@@ -277,7 +365,7 @@ typedef struct mac_addr {
} macaddr_t;
/* Structure that represent every FIFO element in the BAR1
- * Address location.
+ * Address location.
*/
typedef struct _TxFIFO_element {
u64 TxDL_Pointer;
@@ -339,6 +427,7 @@ typedef struct _RxD_t {
#define RXD_FRAME_PROTO vBIT(0xFFFF,24,8)
#define RXD_FRAME_PROTO_IPV4 BIT(27)
#define RXD_FRAME_PROTO_IPV6 BIT(28)
+#define RXD_FRAME_IP_FRAG BIT(29)
#define RXD_FRAME_PROTO_TCP BIT(30)
#define RXD_FRAME_PROTO_UDP BIT(31)
#define TCP_OR_UDP_FRAME (RXD_FRAME_PROTO_TCP | RXD_FRAME_PROTO_UDP)
@@ -346,11 +435,15 @@ typedef struct _RxD_t {
#define RXD_GET_L4_CKSUM(val) ((u16)(val) & 0xFFFF)
u64 Control_2;
+#define THE_RXD_MARK 0x3
+#define SET_RXD_MARKER vBIT(THE_RXD_MARK, 0, 2)
+#define GET_RXD_MARKER(ctrl) ((ctrl & SET_RXD_MARKER) >> 62)
+
#ifndef CONFIG_2BUFF_MODE
-#define MASK_BUFFER0_SIZE vBIT(0xFFFF,0,16)
-#define SET_BUFFER0_SIZE(val) vBIT(val,0,16)
+#define MASK_BUFFER0_SIZE vBIT(0x3FFF,2,14)
+#define SET_BUFFER0_SIZE(val) vBIT(val,2,14)
#else
-#define MASK_BUFFER0_SIZE vBIT(0xFF,0,16)
+#define MASK_BUFFER0_SIZE vBIT(0xFF,2,14)
#define MASK_BUFFER1_SIZE vBIT(0xFFFF,16,16)
#define MASK_BUFFER2_SIZE vBIT(0xFFFF,32,16)
#define SET_BUFFER0_SIZE(val) vBIT(val,8,8)
@@ -363,7 +456,7 @@ typedef struct _RxD_t {
#define SET_NUM_TAG(val) vBIT(val,16,32)
#ifndef CONFIG_2BUFF_MODE
-#define RXD_GET_BUFFER0_SIZE(Control_2) (u64)((Control_2 & vBIT(0xFFFF,0,16)))
+#define RXD_GET_BUFFER0_SIZE(Control_2) (u64)((Control_2 & vBIT(0x3FFF,2,14)))
#else
#define RXD_GET_BUFFER0_SIZE(Control_2) (u8)((Control_2 & MASK_BUFFER0_SIZE) \
>> 48)
@@ -382,7 +475,7 @@ typedef struct _RxD_t {
#endif
} RxD_t;
-/* Structure that represents the Rx descriptor block which contains
+/* Structure that represents the Rx descriptor block which contains
* 128 Rx descriptors.
*/
#ifndef CONFIG_2BUFF_MODE
@@ -392,11 +485,11 @@ typedef struct _RxD_block {
u64 reserved_0;
#define END_OF_BLOCK 0xFEFFFFFFFFFFFFFFULL
- u64 reserved_1; /* 0xFEFFFFFFFFFFFFFF to mark last
+ u64 reserved_1; /* 0xFEFFFFFFFFFFFFFF to mark last
* Rxd in this blk */
u64 reserved_2_pNext_RxD_block; /* Logical ptr to next */
u64 pNext_RxD_Blk_physical; /* Buff0_ptr.In a 32 bit arch
- * the upper 32 bits should
+ * the upper 32 bits should
* be 0 */
} RxD_block_t;
#else
@@ -405,13 +498,13 @@ typedef struct _RxD_block {
RxD_t rxd[MAX_RXDS_PER_BLOCK];
#define END_OF_BLOCK 0xFEFFFFFFFFFFFFFFULL
- u64 reserved_1; /* 0xFEFFFFFFFFFFFFFF to mark last Rxd
+ u64 reserved_1; /* 0xFEFFFFFFFFFFFFFF to mark last Rxd
* in this blk */
u64 pNext_RxD_Blk_physical; /* Phy ponter to next blk. */
} RxD_block_t;
#define SIZE_OF_BLOCK 4096
-/* Structure to hold virtual addresses of Buf0 and Buf1 in
+/* Structure to hold virtual addresses of Buf0 and Buf1 in
* 2buf mode. */
typedef struct bufAdd {
void *ba_0_org;
@@ -423,8 +516,8 @@ typedef struct bufAdd {
/* Structure which stores all the MAC control parameters */
-/* This structure stores the offset of the RxD in the ring
- * from which the Rx Interrupt processor can start picking
+/* This structure stores the offset of the RxD in the ring
+ * from which the Rx Interrupt processor can start picking
* up the RxDs for processing.
*/
typedef struct _rx_curr_get_info_t {
@@ -436,7 +529,7 @@ typedef struct _rx_curr_get_info_t {
typedef rx_curr_get_info_t rx_curr_put_info_t;
/* This structure stores the offset of the TxDl in the FIFO
- * from which the Tx Interrupt processor can start picking
+ * from which the Tx Interrupt processor can start picking
* up the TxDLs for send complete interrupt processing.
*/
typedef struct {
@@ -446,32 +539,96 @@ typedef struct {
typedef tx_curr_get_info_t tx_curr_put_info_t;
-/* Infomation related to the Tx and Rx FIFOs and Rings of Xena
- * is maintained in this structure.
- */
-typedef struct mac_info {
-/* rx side stuff */
- /* Put pointer info which indictes which RxD has to be replenished
+/* Structure that holds the Phy and virt addresses of the Blocks */
+typedef struct rx_block_info {
+ RxD_t *block_virt_addr;
+ dma_addr_t block_dma_addr;
+} rx_block_info_t;
+
+/* pre declaration of the nic structure */
+typedef struct s2io_nic nic_t;
+
+/* Ring specific structure */
+typedef struct ring_info {
+ /* The ring number */
+ int ring_no;
+
+ /*
+ * Place holders for the virtual and physical addresses of
+ * all the Rx Blocks
+ */
+ rx_block_info_t rx_blocks[MAX_RX_BLOCKS_PER_RING];
+ int block_count;
+ int pkt_cnt;
+
+ /*
+ * Put pointer info which indictes which RxD has to be replenished
* with a new buffer.
*/
- rx_curr_put_info_t rx_curr_put_info[MAX_RX_RINGS];
+ rx_curr_put_info_t rx_curr_put_info;
- /* Get pointer info which indictes which is the last RxD that was
+ /*
+ * Get pointer info which indictes which is the last RxD that was
* processed by the driver.
*/
- rx_curr_get_info_t rx_curr_get_info[MAX_RX_RINGS];
+ rx_curr_get_info_t rx_curr_get_info;
- u16 rmac_pause_time;
- u16 mc_pause_threshold_q0q3;
- u16 mc_pause_threshold_q4q7;
+#ifndef CONFIG_S2IO_NAPI
+ /* Index to the absolute position of the put pointer of Rx ring */
+ int put_pos;
+#endif
+
+#ifdef CONFIG_2BUFF_MODE
+ /* Buffer Address store. */
+ buffAdd_t **ba;
+#endif
+ nic_t *nic;
+} ring_info_t;
+/* Fifo specific structure */
+typedef struct fifo_info {
+ /* FIFO number */
+ int fifo_no;
+
+ /* Maximum TxDs per TxDL */
+ int max_txds;
+
+ /* Place holder of all the TX List's Phy and Virt addresses. */
+ list_info_hold_t *list_info;
+
+ /*
+ * Current offset within the tx FIFO where driver would write
+ * new Tx frame
+ */
+ tx_curr_put_info_t tx_curr_put_info;
+
+ /*
+ * Current offset within tx FIFO from where the driver would start freeing
+ * the buffers
+ */
+ tx_curr_get_info_t tx_curr_get_info;
+
+ nic_t *nic;
+}fifo_info_t;
+
+/* Infomation related to the Tx and Rx FIFOs and Rings of Xena
+ * is maintained in this structure.
+ */
+typedef struct mac_info {
/* tx side stuff */
/* logical pointer of start of each Tx FIFO */
TxFIFO_element_t __iomem *tx_FIFO_start[MAX_TX_FIFOS];
-/* Current offset within tx_FIFO_start, where driver would write new Tx frame*/
- tx_curr_put_info_t tx_curr_put_info[MAX_TX_FIFOS];
- tx_curr_get_info_t tx_curr_get_info[MAX_TX_FIFOS];
+ /* Fifo specific structure */
+ fifo_info_t fifos[MAX_TX_FIFOS];
+
+/* rx side stuff */
+ /* Ring specific structure */
+ ring_info_t rings[MAX_RX_RINGS];
+
+ u16 rmac_pause_time;
+ u16 mc_pause_threshold_q0q3;
+ u16 mc_pause_threshold_q4q7;
void *stats_mem; /* orignal pointer to allocated mem */
dma_addr_t stats_mem_phy; /* Physical address of the stat block */
@@ -485,12 +642,6 @@ typedef struct {
int usage_cnt;
} usr_addr_t;
-/* Structure that holds the Phy and virt addresses of the Blocks */
-typedef struct rx_block_info {
- RxD_t *block_virt_addr;
- dma_addr_t block_dma_addr;
-} rx_block_info_t;
-
/* Default Tunable parameters of the NIC. */
#define DEFAULT_FIFO_LEN 4096
#define SMALL_RXD_CNT 30 * (MAX_RXDS_PER_BLOCK+1)
@@ -499,7 +650,20 @@ typedef struct rx_block_info {
#define LARGE_BLK_CNT 100
/* Structure representing one instance of the NIC */
-typedef struct s2io_nic {
+struct s2io_nic {
+#ifdef CONFIG_S2IO_NAPI
+ /*
+ * Count of packets to be processed in a given iteration, it will be indicated
+ * by the quota field of the device structure when NAPI is enabled.
+ */
+ int pkts_to_process;
+#endif
+ struct net_device *dev;
+ mac_info_t mac_control;
+ struct config_param config;
+ struct pci_dev *pdev;
+ void __iomem *bar0;
+ void __iomem *bar1;
#define MAX_MAC_SUPPORTED 16
#define MAX_SUPPORTED_MULTICASTS MAX_MAC_SUPPORTED
@@ -507,33 +671,20 @@ typedef struct s2io_nic {
macaddr_t pre_mac_addr[MAX_MAC_SUPPORTED];
struct net_device_stats stats;
- void __iomem *bar0;
- void __iomem *bar1;
- struct config_param config;
- mac_info_t mac_control;
int high_dma_flag;
int device_close_flag;
int device_enabled_once;
- char name[32];
+ char name[50];
struct tasklet_struct task;
volatile unsigned long tasklet_status;
- struct timer_list timer;
- struct net_device *dev;
- struct pci_dev *pdev;
- u16 vendor_id;
- u16 device_id;
- u16 ccmd;
- u32 cbar0_1;
- u32 cbar0_2;
- u32 cbar1_1;
- u32 cbar1_2;
- u32 cirq;
- u8 cache_line;
- u32 rom_expansion;
- u16 pcix_cmd;
- u32 irq;
+ /* Timer that handles I/O errors/exceptions */
+ struct timer_list alarm_timer;
+
+ /* Space to back up the PCI config space */
+ u32 config_space[256 / sizeof(u32)];
+
atomic_t rx_bufs_left[MAX_RX_RINGS];
spinlock_t tx_lock;
@@ -558,27 +709,11 @@ typedef struct s2io_nic {
u16 tx_err_count;
u16 rx_err_count;
-#ifndef CONFIG_S2IO_NAPI
- /* Index to the absolute position of the put pointer of Rx ring. */
- int put_pos[MAX_RX_RINGS];
-#endif
-
- /*
- * Place holders for the virtual and physical addresses of
- * all the Rx Blocks
- */
- rx_block_info_t rx_blocks[MAX_RX_RINGS][MAX_RX_BLOCKS_PER_RING];
- int block_count[MAX_RX_RINGS];
- int pkt_cnt[MAX_RX_RINGS];
-
- /* Place holder of all the TX List's Phy and Virt addresses. */
- list_info_hold_t *list_info[MAX_TX_FIFOS];
-
/* Id timer, used to blink NIC to physically identify NIC. */
struct timer_list id_timer;
/* Restart timer, used to restart NIC if the device is stuck and
- * a schedule task that will set the correct Link state once the
+ * a schedule task that will set the correct Link state once the
* NIC's PHY has stabilized after a state change.
*/
#ifdef INIT_TQUEUE
@@ -589,12 +724,12 @@ typedef struct s2io_nic {
struct work_struct set_link_task;
#endif
- /* Flag that can be used to turn on or turn off the Rx checksum
+ /* Flag that can be used to turn on or turn off the Rx checksum
* offload feature.
*/
int rx_csum;
- /* after blink, the adapter must be restored with original
+ /* after blink, the adapter must be restored with original
* values.
*/
u64 adapt_ctrl_org;
@@ -604,16 +739,19 @@ typedef struct s2io_nic {
#define LINK_DOWN 1
#define LINK_UP 2
-#ifdef CONFIG_2BUFF_MODE
- /* Buffer Address store. */
- buffAdd_t **ba[MAX_RX_RINGS];
-#endif
int task_flag;
#define CARD_DOWN 1
#define CARD_UP 2
atomic_t card_state;
volatile unsigned long link_state;
-} nic_t;
+ struct vlan_group *vlgrp;
+#define XFRAME_I_DEVICE 1
+#define XFRAME_II_DEVICE 2
+ u8 device_type;
+
+ spinlock_t rx_lock;
+ atomic_t isr_cnt;
+};
#define RESET_ERROR 1;
#define CMD_ERROR 2;
@@ -622,7 +760,8 @@ typedef struct s2io_nic {
#ifndef readq
static inline u64 readq(void __iomem *addr)
{
- u64 ret = readl(addr + 4);
+ u64 ret = 0;
+ ret = readl(addr + 4);
ret <<= 32;
ret |= readl(addr);
@@ -637,10 +776,10 @@ static inline void writeq(u64 val, void __iomem *addr)
writel((u32) (val >> 32), (addr + 4));
}
-/* In 32 bit modes, some registers have to be written in a
+/* In 32 bit modes, some registers have to be written in a
* particular order to expect correct hardware operation. The
- * macro SPECIAL_REG_WRITE is used to perform such ordered
- * writes. Defines UF (Upper First) and LF (Lower First) will
+ * macro SPECIAL_REG_WRITE is used to perform such ordered
+ * writes. Defines UF (Upper First) and LF (Lower First) will
* be used to specify the required write order.
*/
#define UF 1
@@ -716,6 +855,7 @@ static inline void SPECIAL_REG_WRITE(u64 val, void __iomem *addr, int order)
#define PCC_FB_ECC_ERR vBIT(0xff, 16, 8) /* Interrupt to indicate
PCC_FB_ECC Error. */
+#define RXD_GET_VLAN_TAG(Control_2) (u16)(Control_2 & MASK_VLAN_TAG)
/*
* Prototype declaration.
*/
@@ -725,36 +865,30 @@ static void __devexit s2io_rem_nic(struct pci_dev *pdev);
static int init_shared_mem(struct s2io_nic *sp);
static void free_shared_mem(struct s2io_nic *sp);
static int init_nic(struct s2io_nic *nic);
-#ifndef CONFIG_S2IO_NAPI
-static void rx_intr_handler(struct s2io_nic *sp);
-#endif
-static void tx_intr_handler(struct s2io_nic *sp);
+static void rx_intr_handler(ring_info_t *ring_data);
+static void tx_intr_handler(fifo_info_t *fifo_data);
static void alarm_intr_handler(struct s2io_nic *sp);
static int s2io_starter(void);
-static void s2io_closer(void);
+void s2io_closer(void);
static void s2io_tx_watchdog(struct net_device *dev);
static void s2io_tasklet(unsigned long dev_addr);
static void s2io_set_multicast(struct net_device *dev);
-#ifndef CONFIG_2BUFF_MODE
-static int rx_osm_handler(nic_t * sp, u16 len, RxD_t * rxdp, int ring_no);
-#else
-static int rx_osm_handler(nic_t * sp, RxD_t * rxdp, int ring_no,
- buffAdd_t * ba);
-#endif
-static void s2io_link(nic_t * sp, int link);
-static void s2io_reset(nic_t * sp);
-#ifdef CONFIG_S2IO_NAPI
+static int rx_osm_handler(ring_info_t *ring_data, RxD_t * rxdp);
+void s2io_link(nic_t * sp, int link);
+void s2io_reset(nic_t * sp);
+#if defined(CONFIG_S2IO_NAPI)
static int s2io_poll(struct net_device *dev, int *budget);
#endif
static void s2io_init_pci(nic_t * sp);
-static int s2io_set_mac_addr(struct net_device *dev, u8 * addr);
+int s2io_set_mac_addr(struct net_device *dev, u8 * addr);
+static void s2io_alarm_handle(unsigned long data);
static irqreturn_t s2io_isr(int irq, void *dev_id, struct pt_regs *regs);
-static int verify_xena_quiescence(u64 val64, int flag);
+static int verify_xena_quiescence(nic_t *sp, u64 val64, int flag);
static struct ethtool_ops netdev_ethtool_ops;
static void s2io_set_link(unsigned long data);
-static int s2io_set_swapper(nic_t * sp);
-static void s2io_card_down(nic_t * nic);
-static int s2io_card_up(nic_t * nic);
-
+int s2io_set_swapper(nic_t * sp);
+static void s2io_card_down(nic_t *nic);
+static int s2io_card_up(nic_t *nic);
+int get_xena_rev_id(struct pci_dev *pdev);
#endif /* _S2IO_H */
diff --git a/drivers/net/shaper.c b/drivers/net/shaper.c
index 3ad0b6751f6..221354eea21 100644
--- a/drivers/net/shaper.c
+++ b/drivers/net/shaper.c
@@ -156,52 +156,6 @@ static int shaper_start_xmit(struct sk_buff *skb, struct net_device *dev)
SHAPERCB(skb)->shapelen= shaper_clocks(shaper,skb);
-#ifdef SHAPER_COMPLEX /* and broken.. */
-
- while(ptr && ptr!=(struct sk_buff *)&shaper->sendq)
- {
- if(ptr->pri<skb->pri
- && jiffies - SHAPERCB(ptr)->shapeclock < SHAPER_MAXSLIP)
- {
- struct sk_buff *tmp=ptr->prev;
-
- /*
- * It goes before us therefore we slip the length
- * of the new frame.
- */
-
- SHAPERCB(ptr)->shapeclock+=SHAPERCB(skb)->shapelen;
- SHAPERCB(ptr)->shapelatency+=SHAPERCB(skb)->shapelen;
-
- /*
- * The packet may have slipped so far back it
- * fell off.
- */
- if(SHAPERCB(ptr)->shapelatency > SHAPER_LATENCY)
- {
- skb_unlink(ptr);
- dev_kfree_skb(ptr);
- }
- ptr=tmp;
- }
- else
- break;
- }
- if(ptr==NULL || ptr==(struct sk_buff *)&shaper->sendq)
- skb_queue_head(&shaper->sendq,skb);
- else
- {
- struct sk_buff *tmp;
- /*
- * Set the packet clock out time according to the
- * frames ahead. Im sure a bit of thought could drop
- * this loop.
- */
- for(tmp=skb_peek(&shaper->sendq); tmp!=NULL && tmp!=ptr; tmp=tmp->next)
- SHAPERCB(skb)->shapeclock+=tmp->shapelen;
- skb_append(ptr,skb);
- }
-#else
{
struct sk_buff *tmp;
/*
@@ -220,7 +174,7 @@ static int shaper_start_xmit(struct sk_buff *skb, struct net_device *dev)
} else
skb_queue_tail(&shaper->sendq, skb);
}
-#endif
+
if(sh_debug)
printk("Frame queued.\n");
if(skb_queue_len(&shaper->sendq)>SHAPER_QLEN)
@@ -302,7 +256,7 @@ static void shaper_kick(struct shaper *shaper)
* Pull the frame and get interrupts back on.
*/
- skb_unlink(skb);
+ skb_unlink(skb, &shaper->sendq);
if (shaper->recovery <
SHAPERCB(skb)->shapeclock + SHAPERCB(skb)->shapelen)
shaper->recovery = SHAPERCB(skb)->shapeclock + SHAPERCB(skb)->shapelen;
diff --git a/drivers/net/sis190.c b/drivers/net/sis190.c
new file mode 100644
index 00000000000..bf3440aa6c2
--- /dev/null
+++ b/drivers/net/sis190.c
@@ -0,0 +1,1843 @@
+/*
+ sis190.c: Silicon Integrated Systems SiS190 ethernet driver
+
+ Copyright (c) 2003 K.M. Liu <kmliu@sis.com>
+ Copyright (c) 2003, 2004 Jeff Garzik <jgarzik@pobox.com>
+ Copyright (c) 2003, 2004, 2005 Francois Romieu <romieu@fr.zoreil.com>
+
+ Based on r8169.c, tg3.c, 8139cp.c, skge.c, epic100.c and SiS 190/191
+ genuine driver.
+
+ This software may be used and distributed according to the terms of
+ the GNU General Public License (GPL), incorporated herein by reference.
+ Drivers based on or derived from this code fall under the GPL and must
+ retain the authorship, copyright and license notice. This file is not
+ a complete program and may only be used when the entire operating
+ system is licensed under the GPL.
+
+ See the file COPYING in this distribution for more information.
+
+ */
+
+#include <linux/module.h>
+#include <linux/moduleparam.h>
+#include <linux/netdevice.h>
+#include <linux/rtnetlink.h>
+#include <linux/etherdevice.h>
+#include <linux/ethtool.h>
+#include <linux/pci.h>
+#include <linux/mii.h>
+#include <linux/delay.h>
+#include <linux/crc32.h>
+#include <linux/dma-mapping.h>
+#include <asm/irq.h>
+
+#define net_drv(p, arg...) if (netif_msg_drv(p)) \
+ printk(arg)
+#define net_probe(p, arg...) if (netif_msg_probe(p)) \
+ printk(arg)
+#define net_link(p, arg...) if (netif_msg_link(p)) \
+ printk(arg)
+#define net_intr(p, arg...) if (netif_msg_intr(p)) \
+ printk(arg)
+#define net_tx_err(p, arg...) if (netif_msg_tx_err(p)) \
+ printk(arg)
+
+#define PHY_MAX_ADDR 32
+#define PHY_ID_ANY 0x1f
+#define MII_REG_ANY 0x1f
+
+#ifdef CONFIG_SIS190_NAPI
+#define NAPI_SUFFIX "-NAPI"
+#else
+#define NAPI_SUFFIX ""
+#endif
+
+#define DRV_VERSION "1.2" NAPI_SUFFIX
+#define DRV_NAME "sis190"
+#define SIS190_DRIVER_NAME DRV_NAME " Gigabit Ethernet driver " DRV_VERSION
+#define PFX DRV_NAME ": "
+
+#ifdef CONFIG_SIS190_NAPI
+#define sis190_rx_skb netif_receive_skb
+#define sis190_rx_quota(count, quota) min(count, quota)
+#else
+#define sis190_rx_skb netif_rx
+#define sis190_rx_quota(count, quota) count
+#endif
+
+#define MAC_ADDR_LEN 6
+
+#define NUM_TX_DESC 64 /* [8..1024] */
+#define NUM_RX_DESC 64 /* [8..8192] */
+#define TX_RING_BYTES (NUM_TX_DESC * sizeof(struct TxDesc))
+#define RX_RING_BYTES (NUM_RX_DESC * sizeof(struct RxDesc))
+#define RX_BUF_SIZE 1536
+#define RX_BUF_MASK 0xfff8
+
+#define SIS190_REGS_SIZE 0x80
+#define SIS190_TX_TIMEOUT (6*HZ)
+#define SIS190_PHY_TIMEOUT (10*HZ)
+#define SIS190_MSG_DEFAULT (NETIF_MSG_DRV | NETIF_MSG_PROBE | \
+ NETIF_MSG_LINK | NETIF_MSG_IFUP | \
+ NETIF_MSG_IFDOWN)
+
+/* Enhanced PHY access register bit definitions */
+#define EhnMIIread 0x0000
+#define EhnMIIwrite 0x0020
+#define EhnMIIdataShift 16
+#define EhnMIIpmdShift 6 /* 7016 only */
+#define EhnMIIregShift 11
+#define EhnMIIreq 0x0010
+#define EhnMIInotDone 0x0010
+
+/* Write/read MMIO register */
+#define SIS_W8(reg, val) writeb ((val), ioaddr + (reg))
+#define SIS_W16(reg, val) writew ((val), ioaddr + (reg))
+#define SIS_W32(reg, val) writel ((val), ioaddr + (reg))
+#define SIS_R8(reg) readb (ioaddr + (reg))
+#define SIS_R16(reg) readw (ioaddr + (reg))
+#define SIS_R32(reg) readl (ioaddr + (reg))
+
+#define SIS_PCI_COMMIT() SIS_R32(IntrControl)
+
+enum sis190_registers {
+ TxControl = 0x00,
+ TxDescStartAddr = 0x04,
+ rsv0 = 0x08, // reserved
+ TxSts = 0x0c, // unused (Control/Status)
+ RxControl = 0x10,
+ RxDescStartAddr = 0x14,
+ rsv1 = 0x18, // reserved
+ RxSts = 0x1c, // unused
+ IntrStatus = 0x20,
+ IntrMask = 0x24,
+ IntrControl = 0x28,
+ IntrTimer = 0x2c, // unused (Interupt Timer)
+ PMControl = 0x30, // unused (Power Mgmt Control/Status)
+ rsv2 = 0x34, // reserved
+ ROMControl = 0x38,
+ ROMInterface = 0x3c,
+ StationControl = 0x40,
+ GMIIControl = 0x44,
+ GIoCR = 0x48, // unused (GMAC IO Compensation)
+ GIoCtrl = 0x4c, // unused (GMAC IO Control)
+ TxMacControl = 0x50,
+ TxLimit = 0x54, // unused (Tx MAC Timer/TryLimit)
+ RGDelay = 0x58, // unused (RGMII Tx Internal Delay)
+ rsv3 = 0x5c, // reserved
+ RxMacControl = 0x60,
+ RxMacAddr = 0x62,
+ RxHashTable = 0x68,
+ // Undocumented = 0x6c,
+ RxWolCtrl = 0x70,
+ RxWolData = 0x74, // unused (Rx WOL Data Access)
+ RxMPSControl = 0x78, // unused (Rx MPS Control)
+ rsv4 = 0x7c, // reserved
+};
+
+enum sis190_register_content {
+ /* IntrStatus */
+ SoftInt = 0x40000000, // unused
+ Timeup = 0x20000000, // unused
+ PauseFrame = 0x00080000, // unused
+ MagicPacket = 0x00040000, // unused
+ WakeupFrame = 0x00020000, // unused
+ LinkChange = 0x00010000,
+ RxQEmpty = 0x00000080,
+ RxQInt = 0x00000040,
+ TxQ1Empty = 0x00000020, // unused
+ TxQ1Int = 0x00000010,
+ TxQ0Empty = 0x00000008, // unused
+ TxQ0Int = 0x00000004,
+ RxHalt = 0x00000002,
+ TxHalt = 0x00000001,
+
+ /* {Rx/Tx}CmdBits */
+ CmdReset = 0x10,
+ CmdRxEnb = 0x08, // unused
+ CmdTxEnb = 0x01,
+ RxBufEmpty = 0x01, // unused
+
+ /* Cfg9346Bits */
+ Cfg9346_Lock = 0x00, // unused
+ Cfg9346_Unlock = 0xc0, // unused
+
+ /* RxMacControl */
+ AcceptErr = 0x20, // unused
+ AcceptRunt = 0x10, // unused
+ AcceptBroadcast = 0x0800,
+ AcceptMulticast = 0x0400,
+ AcceptMyPhys = 0x0200,
+ AcceptAllPhys = 0x0100,
+
+ /* RxConfigBits */
+ RxCfgFIFOShift = 13,
+ RxCfgDMAShift = 8, // 0x1a in RxControl ?
+
+ /* TxConfigBits */
+ TxInterFrameGapShift = 24,
+ TxDMAShift = 8, /* DMA burst value (0-7) is shift this many bits */
+
+ /* StationControl */
+ _1000bpsF = 0x1c00,
+ _1000bpsH = 0x0c00,
+ _100bpsF = 0x1800,
+ _100bpsH = 0x0800,
+ _10bpsF = 0x1400,
+ _10bpsH = 0x0400,
+
+ LinkStatus = 0x02, // unused
+ FullDup = 0x01, // unused
+
+ /* TBICSRBit */
+ TBILinkOK = 0x02000000, // unused
+};
+
+struct TxDesc {
+ __le32 PSize;
+ __le32 status;
+ __le32 addr;
+ __le32 size;
+};
+
+struct RxDesc {
+ __le32 PSize;
+ __le32 status;
+ __le32 addr;
+ __le32 size;
+};
+
+enum _DescStatusBit {
+ /* _Desc.status */
+ OWNbit = 0x80000000, // RXOWN/TXOWN
+ INTbit = 0x40000000, // RXINT/TXINT
+ CRCbit = 0x00020000, // CRCOFF/CRCEN
+ PADbit = 0x00010000, // PREADD/PADEN
+ /* _Desc.size */
+ RingEnd = 0x80000000,
+ /* TxDesc.status */
+ LSEN = 0x08000000, // TSO ? -- FR
+ IPCS = 0x04000000,
+ TCPCS = 0x02000000,
+ UDPCS = 0x01000000,
+ BSTEN = 0x00800000,
+ EXTEN = 0x00400000,
+ DEFEN = 0x00200000,
+ BKFEN = 0x00100000,
+ CRSEN = 0x00080000,
+ COLEN = 0x00040000,
+ THOL3 = 0x30000000,
+ THOL2 = 0x20000000,
+ THOL1 = 0x10000000,
+ THOL0 = 0x00000000,
+ /* RxDesc.status */
+ IPON = 0x20000000,
+ TCPON = 0x10000000,
+ UDPON = 0x08000000,
+ Wakup = 0x00400000,
+ Magic = 0x00200000,
+ Pause = 0x00100000,
+ DEFbit = 0x00200000,
+ BCAST = 0x000c0000,
+ MCAST = 0x00080000,
+ UCAST = 0x00040000,
+ /* RxDesc.PSize */
+ TAGON = 0x80000000,
+ RxDescCountMask = 0x7f000000, // multi-desc pkt when > 1 ? -- FR
+ ABORT = 0x00800000,
+ SHORT = 0x00400000,
+ LIMIT = 0x00200000,
+ MIIER = 0x00100000,
+ OVRUN = 0x00080000,
+ NIBON = 0x00040000,
+ COLON = 0x00020000,
+ CRCOK = 0x00010000,
+ RxSizeMask = 0x0000ffff
+ /*
+ * The asic could apparently do vlan, TSO, jumbo (sis191 only) and
+ * provide two (unused with Linux) Tx queues. No publically
+ * available documentation alas.
+ */
+};
+
+enum sis190_eeprom_access_register_bits {
+ EECS = 0x00000001, // unused
+ EECLK = 0x00000002, // unused
+ EEDO = 0x00000008, // unused
+ EEDI = 0x00000004, // unused
+ EEREQ = 0x00000080,
+ EEROP = 0x00000200,
+ EEWOP = 0x00000100 // unused
+};
+
+/* EEPROM Addresses */
+enum sis190_eeprom_address {
+ EEPROMSignature = 0x00,
+ EEPROMCLK = 0x01, // unused
+ EEPROMInfo = 0x02,
+ EEPROMMACAddr = 0x03
+};
+
+struct sis190_private {
+ void __iomem *mmio_addr;
+ struct pci_dev *pci_dev;
+ struct net_device_stats stats;
+ spinlock_t lock;
+ u32 rx_buf_sz;
+ u32 cur_rx;
+ u32 cur_tx;
+ u32 dirty_rx;
+ u32 dirty_tx;
+ dma_addr_t rx_dma;
+ dma_addr_t tx_dma;
+ struct RxDesc *RxDescRing;
+ struct TxDesc *TxDescRing;
+ struct sk_buff *Rx_skbuff[NUM_RX_DESC];
+ struct sk_buff *Tx_skbuff[NUM_TX_DESC];
+ struct work_struct phy_task;
+ struct timer_list timer;
+ u32 msg_enable;
+ struct mii_if_info mii_if;
+ struct list_head first_phy;
+};
+
+struct sis190_phy {
+ struct list_head list;
+ int phy_id;
+ u16 id[2];
+ u16 status;
+ u8 type;
+};
+
+enum sis190_phy_type {
+ UNKNOWN = 0x00,
+ HOME = 0x01,
+ LAN = 0x02,
+ MIX = 0x03
+};
+
+static struct mii_chip_info {
+ const char *name;
+ u16 id[2];
+ unsigned int type;
+} mii_chip_table[] = {
+ { "Broadcom PHY BCM5461", { 0x0020, 0x60c0 }, LAN },
+ { "Agere PHY ET1101B", { 0x0282, 0xf010 }, LAN },
+ { "Marvell PHY 88E1111", { 0x0141, 0x0cc0 }, LAN },
+ { "Realtek PHY RTL8201", { 0x0000, 0x8200 }, LAN },
+ { NULL, }
+};
+
+const static struct {
+ const char *name;
+ u8 version; /* depend on docs */
+ u32 RxConfigMask; /* clear the bits supported by this chip */
+} sis_chip_info[] = {
+ { DRV_NAME, 0x00, 0xff7e1880, },
+};
+
+static struct pci_device_id sis190_pci_tbl[] __devinitdata = {
+ { PCI_DEVICE(PCI_VENDOR_ID_SI, 0x0190), 0, 0, 0 },
+ { 0, },
+};
+
+MODULE_DEVICE_TABLE(pci, sis190_pci_tbl);
+
+static int rx_copybreak = 200;
+
+static struct {
+ u32 msg_enable;
+} debug = { -1 };
+
+MODULE_DESCRIPTION("SiS sis190 Gigabit Ethernet driver");
+module_param(rx_copybreak, int, 0);
+MODULE_PARM_DESC(rx_copybreak, "Copy breakpoint for copy-only-tiny-frames");
+module_param_named(debug, debug.msg_enable, int, 0);
+MODULE_PARM_DESC(debug, "Debug verbosity level (0=none, ..., 16=all)");
+MODULE_AUTHOR("K.M. Liu <kmliu@sis.com>, Ueimor <romieu@fr.zoreil.com>");
+MODULE_VERSION(DRV_VERSION);
+MODULE_LICENSE("GPL");
+
+static const u32 sis190_intr_mask =
+ RxQEmpty | RxQInt | TxQ1Int | TxQ0Int | RxHalt | TxHalt;
+
+/*
+ * Maximum number of multicast addresses to filter (vs. Rx-all-multicast).
+ * The chips use a 64 element hash table based on the Ethernet CRC.
+ */
+static int multicast_filter_limit = 32;
+
+static void __mdio_cmd(void __iomem *ioaddr, u32 ctl)
+{
+ unsigned int i;
+
+ SIS_W32(GMIIControl, ctl);
+
+ msleep(1);
+
+ for (i = 0; i < 100; i++) {
+ if (!(SIS_R32(GMIIControl) & EhnMIInotDone))
+ break;
+ msleep(1);
+ }
+
+ if (i > 999)
+ printk(KERN_ERR PFX "PHY command failed !\n");
+}
+
+static void mdio_write(void __iomem *ioaddr, int phy_id, int reg, int val)
+{
+ __mdio_cmd(ioaddr, EhnMIIreq | EhnMIIwrite |
+ (((u32) reg) << EhnMIIregShift) | (phy_id << EhnMIIpmdShift) |
+ (((u32) val) << EhnMIIdataShift));
+}
+
+static int mdio_read(void __iomem *ioaddr, int phy_id, int reg)
+{
+ __mdio_cmd(ioaddr, EhnMIIreq | EhnMIIread |
+ (((u32) reg) << EhnMIIregShift) | (phy_id << EhnMIIpmdShift));
+
+ return (u16) (SIS_R32(GMIIControl) >> EhnMIIdataShift);
+}
+
+static void __mdio_write(struct net_device *dev, int phy_id, int reg, int val)
+{
+ struct sis190_private *tp = netdev_priv(dev);
+
+ mdio_write(tp->mmio_addr, phy_id, reg, val);
+}
+
+static int __mdio_read(struct net_device *dev, int phy_id, int reg)
+{
+ struct sis190_private *tp = netdev_priv(dev);
+
+ return mdio_read(tp->mmio_addr, phy_id, reg);
+}
+
+static u16 mdio_read_latched(void __iomem *ioaddr, int phy_id, int reg)
+{
+ mdio_read(ioaddr, phy_id, reg);
+ return mdio_read(ioaddr, phy_id, reg);
+}
+
+static u16 __devinit sis190_read_eeprom(void __iomem *ioaddr, u32 reg)
+{
+ u16 data = 0xffff;
+ unsigned int i;
+
+ if (!(SIS_R32(ROMControl) & 0x0002))
+ return 0;
+
+ SIS_W32(ROMInterface, EEREQ | EEROP | (reg << 10));
+
+ for (i = 0; i < 200; i++) {
+ if (!(SIS_R32(ROMInterface) & EEREQ)) {
+ data = (SIS_R32(ROMInterface) & 0xffff0000) >> 16;
+ break;
+ }
+ msleep(1);
+ }
+
+ return data;
+}
+
+static void sis190_irq_mask_and_ack(void __iomem *ioaddr)
+{
+ SIS_W32(IntrMask, 0x00);
+ SIS_W32(IntrStatus, 0xffffffff);
+ SIS_PCI_COMMIT();
+}
+
+static void sis190_asic_down(void __iomem *ioaddr)
+{
+ /* Stop the chip's Tx and Rx DMA processes. */
+
+ SIS_W32(TxControl, 0x1a00);
+ SIS_W32(RxControl, 0x1a00);
+
+ sis190_irq_mask_and_ack(ioaddr);
+}
+
+static void sis190_mark_as_last_descriptor(struct RxDesc *desc)
+{
+ desc->size |= cpu_to_le32(RingEnd);
+}
+
+static inline void sis190_give_to_asic(struct RxDesc *desc, u32 rx_buf_sz)
+{
+ u32 eor = le32_to_cpu(desc->size) & RingEnd;
+
+ desc->PSize = 0x0;
+ desc->size = cpu_to_le32((rx_buf_sz & RX_BUF_MASK) | eor);
+ wmb();
+ desc->status = cpu_to_le32(OWNbit | INTbit);
+}
+
+static inline void sis190_map_to_asic(struct RxDesc *desc, dma_addr_t mapping,
+ u32 rx_buf_sz)
+{
+ desc->addr = cpu_to_le32(mapping);
+ sis190_give_to_asic(desc, rx_buf_sz);
+}
+
+static inline void sis190_make_unusable_by_asic(struct RxDesc *desc)
+{
+ desc->PSize = 0x0;
+ desc->addr = 0xdeadbeef;
+ desc->size &= cpu_to_le32(RingEnd);
+ wmb();
+ desc->status = 0x0;
+}
+
+static int sis190_alloc_rx_skb(struct pci_dev *pdev, struct sk_buff **sk_buff,
+ struct RxDesc *desc, u32 rx_buf_sz)
+{
+ struct sk_buff *skb;
+ dma_addr_t mapping;
+ int ret = 0;
+
+ skb = dev_alloc_skb(rx_buf_sz);
+ if (!skb)
+ goto err_out;
+
+ *sk_buff = skb;
+
+ mapping = pci_map_single(pdev, skb->data, rx_buf_sz,
+ PCI_DMA_FROMDEVICE);
+
+ sis190_map_to_asic(desc, mapping, rx_buf_sz);
+out:
+ return ret;
+
+err_out:
+ ret = -ENOMEM;
+ sis190_make_unusable_by_asic(desc);
+ goto out;
+}
+
+static u32 sis190_rx_fill(struct sis190_private *tp, struct net_device *dev,
+ u32 start, u32 end)
+{
+ u32 cur;
+
+ for (cur = start; cur < end; cur++) {
+ int ret, i = cur % NUM_RX_DESC;
+
+ if (tp->Rx_skbuff[i])
+ continue;
+
+ ret = sis190_alloc_rx_skb(tp->pci_dev, tp->Rx_skbuff + i,
+ tp->RxDescRing + i, tp->rx_buf_sz);
+ if (ret < 0)
+ break;
+ }
+ return cur - start;
+}
+
+static inline int sis190_try_rx_copy(struct sk_buff **sk_buff, int pkt_size,
+ struct RxDesc *desc, int rx_buf_sz)
+{
+ int ret = -1;
+
+ if (pkt_size < rx_copybreak) {
+ struct sk_buff *skb;
+
+ skb = dev_alloc_skb(pkt_size + NET_IP_ALIGN);
+ if (skb) {
+ skb_reserve(skb, NET_IP_ALIGN);
+ eth_copy_and_sum(skb, sk_buff[0]->data, pkt_size, 0);
+ *sk_buff = skb;
+ sis190_give_to_asic(desc, rx_buf_sz);
+ ret = 0;
+ }
+ }
+ return ret;
+}
+
+static inline int sis190_rx_pkt_err(u32 status, struct net_device_stats *stats)
+{
+#define ErrMask (OVRUN | SHORT | LIMIT | MIIER | NIBON | COLON | ABORT)
+
+ if ((status & CRCOK) && !(status & ErrMask))
+ return 0;
+
+ if (!(status & CRCOK))
+ stats->rx_crc_errors++;
+ else if (status & OVRUN)
+ stats->rx_over_errors++;
+ else if (status & (SHORT | LIMIT))
+ stats->rx_length_errors++;
+ else if (status & (MIIER | NIBON | COLON))
+ stats->rx_frame_errors++;
+
+ stats->rx_errors++;
+ return -1;
+}
+
+static int sis190_rx_interrupt(struct net_device *dev,
+ struct sis190_private *tp, void __iomem *ioaddr)
+{
+ struct net_device_stats *stats = &tp->stats;
+ u32 rx_left, cur_rx = tp->cur_rx;
+ u32 delta, count;
+
+ rx_left = NUM_RX_DESC + tp->dirty_rx - cur_rx;
+ rx_left = sis190_rx_quota(rx_left, (u32) dev->quota);
+
+ for (; rx_left > 0; rx_left--, cur_rx++) {
+ unsigned int entry = cur_rx % NUM_RX_DESC;
+ struct RxDesc *desc = tp->RxDescRing + entry;
+ u32 status;
+
+ if (desc->status & OWNbit)
+ break;
+
+ status = le32_to_cpu(desc->PSize);
+
+ // net_intr(tp, KERN_INFO "%s: Rx PSize = %08x.\n", dev->name,
+ // status);
+
+ if (sis190_rx_pkt_err(status, stats) < 0)
+ sis190_give_to_asic(desc, tp->rx_buf_sz);
+ else {
+ struct sk_buff *skb = tp->Rx_skbuff[entry];
+ int pkt_size = (status & RxSizeMask) - 4;
+ void (*pci_action)(struct pci_dev *, dma_addr_t,
+ size_t, int) = pci_dma_sync_single_for_device;
+
+ if (unlikely(pkt_size > tp->rx_buf_sz)) {
+ net_intr(tp, KERN_INFO
+ "%s: (frag) status = %08x.\n",
+ dev->name, status);
+ stats->rx_dropped++;
+ stats->rx_length_errors++;
+ sis190_give_to_asic(desc, tp->rx_buf_sz);
+ continue;
+ }
+
+ pci_dma_sync_single_for_cpu(tp->pci_dev,
+ le32_to_cpu(desc->addr), tp->rx_buf_sz,
+ PCI_DMA_FROMDEVICE);
+
+ if (sis190_try_rx_copy(&skb, pkt_size, desc,
+ tp->rx_buf_sz)) {
+ pci_action = pci_unmap_single;
+ tp->Rx_skbuff[entry] = NULL;
+ sis190_make_unusable_by_asic(desc);
+ }
+
+ pci_action(tp->pci_dev, le32_to_cpu(desc->addr),
+ tp->rx_buf_sz, PCI_DMA_FROMDEVICE);
+
+ skb->dev = dev;
+ skb_put(skb, pkt_size);
+ skb->protocol = eth_type_trans(skb, dev);
+
+ sis190_rx_skb(skb);
+
+ dev->last_rx = jiffies;
+ stats->rx_packets++;
+ stats->rx_bytes += pkt_size;
+ if ((status & BCAST) == MCAST)
+ stats->multicast++;
+ }
+ }
+ count = cur_rx - tp->cur_rx;
+ tp->cur_rx = cur_rx;
+
+ delta = sis190_rx_fill(tp, dev, tp->dirty_rx, tp->cur_rx);
+ if (!delta && count && netif_msg_intr(tp))
+ printk(KERN_INFO "%s: no Rx buffer allocated.\n", dev->name);
+ tp->dirty_rx += delta;
+
+ if (((tp->dirty_rx + NUM_RX_DESC) == tp->cur_rx) && netif_msg_intr(tp))
+ printk(KERN_EMERG "%s: Rx buffers exhausted.\n", dev->name);
+
+ return count;
+}
+
+static void sis190_unmap_tx_skb(struct pci_dev *pdev, struct sk_buff *skb,
+ struct TxDesc *desc)
+{
+ unsigned int len;
+
+ len = skb->len < ETH_ZLEN ? ETH_ZLEN : skb->len;
+
+ pci_unmap_single(pdev, le32_to_cpu(desc->addr), len, PCI_DMA_TODEVICE);
+
+ memset(desc, 0x00, sizeof(*desc));
+}
+
+static void sis190_tx_interrupt(struct net_device *dev,
+ struct sis190_private *tp, void __iomem *ioaddr)
+{
+ u32 pending, dirty_tx = tp->dirty_tx;
+ /*
+ * It would not be needed if queueing was allowed to be enabled
+ * again too early (hint: think preempt and unclocked smp systems).
+ */
+ unsigned int queue_stopped;
+
+ smp_rmb();
+ pending = tp->cur_tx - dirty_tx;
+ queue_stopped = (pending == NUM_TX_DESC);
+
+ for (; pending; pending--, dirty_tx++) {
+ unsigned int entry = dirty_tx % NUM_TX_DESC;
+ struct TxDesc *txd = tp->TxDescRing + entry;
+ struct sk_buff *skb;
+
+ if (le32_to_cpu(txd->status) & OWNbit)
+ break;
+
+ skb = tp->Tx_skbuff[entry];
+
+ tp->stats.tx_packets++;
+ tp->stats.tx_bytes += skb->len;
+
+ sis190_unmap_tx_skb(tp->pci_dev, skb, txd);
+ tp->Tx_skbuff[entry] = NULL;
+ dev_kfree_skb_irq(skb);
+ }
+
+ if (tp->dirty_tx != dirty_tx) {
+ tp->dirty_tx = dirty_tx;
+ smp_wmb();
+ if (queue_stopped)
+ netif_wake_queue(dev);
+ }
+}
+
+/*
+ * The interrupt handler does all of the Rx thread work and cleans up after
+ * the Tx thread.
+ */
+static irqreturn_t sis190_interrupt(int irq, void *__dev, struct pt_regs *regs)
+{
+ struct net_device *dev = __dev;
+ struct sis190_private *tp = netdev_priv(dev);
+ void __iomem *ioaddr = tp->mmio_addr;
+ unsigned int handled = 0;
+ u32 status;
+
+ status = SIS_R32(IntrStatus);
+
+ if ((status == 0xffffffff) || !status)
+ goto out;
+
+ handled = 1;
+
+ if (unlikely(!netif_running(dev))) {
+ sis190_asic_down(ioaddr);
+ goto out;
+ }
+
+ SIS_W32(IntrStatus, status);
+
+ // net_intr(tp, KERN_INFO "%s: status = %08x.\n", dev->name, status);
+
+ if (status & LinkChange) {
+ net_intr(tp, KERN_INFO "%s: link change.\n", dev->name);
+ schedule_work(&tp->phy_task);
+ }
+
+ if (status & RxQInt)
+ sis190_rx_interrupt(dev, tp, ioaddr);
+
+ if (status & TxQ0Int)
+ sis190_tx_interrupt(dev, tp, ioaddr);
+out:
+ return IRQ_RETVAL(handled);
+}
+
+#ifdef CONFIG_NET_POLL_CONTROLLER
+static void sis190_netpoll(struct net_device *dev)
+{
+ struct sis190_private *tp = netdev_priv(dev);
+ struct pci_dev *pdev = tp->pci_dev;
+
+ disable_irq(pdev->irq);
+ sis190_interrupt(pdev->irq, dev, NULL);
+ enable_irq(pdev->irq);
+}
+#endif
+
+static void sis190_free_rx_skb(struct sis190_private *tp,
+ struct sk_buff **sk_buff, struct RxDesc *desc)
+{
+ struct pci_dev *pdev = tp->pci_dev;
+
+ pci_unmap_single(pdev, le32_to_cpu(desc->addr), tp->rx_buf_sz,
+ PCI_DMA_FROMDEVICE);
+ dev_kfree_skb(*sk_buff);
+ *sk_buff = NULL;
+ sis190_make_unusable_by_asic(desc);
+}
+
+static void sis190_rx_clear(struct sis190_private *tp)
+{
+ unsigned int i;
+
+ for (i = 0; i < NUM_RX_DESC; i++) {
+ if (!tp->Rx_skbuff[i])
+ continue;
+ sis190_free_rx_skb(tp, tp->Rx_skbuff + i, tp->RxDescRing + i);
+ }
+}
+
+static void sis190_init_ring_indexes(struct sis190_private *tp)
+{
+ tp->dirty_tx = tp->dirty_rx = tp->cur_tx = tp->cur_rx = 0;
+}
+
+static int sis190_init_ring(struct net_device *dev)
+{
+ struct sis190_private *tp = netdev_priv(dev);
+
+ sis190_init_ring_indexes(tp);
+
+ memset(tp->Tx_skbuff, 0x0, NUM_TX_DESC * sizeof(struct sk_buff *));
+ memset(tp->Rx_skbuff, 0x0, NUM_RX_DESC * sizeof(struct sk_buff *));
+
+ if (sis190_rx_fill(tp, dev, 0, NUM_RX_DESC) != NUM_RX_DESC)
+ goto err_rx_clear;
+
+ sis190_mark_as_last_descriptor(tp->RxDescRing + NUM_RX_DESC - 1);
+
+ return 0;
+
+err_rx_clear:
+ sis190_rx_clear(tp);
+ return -ENOMEM;
+}
+
+static void sis190_set_rx_mode(struct net_device *dev)
+{
+ struct sis190_private *tp = netdev_priv(dev);
+ void __iomem *ioaddr = tp->mmio_addr;
+ unsigned long flags;
+ u32 mc_filter[2]; /* Multicast hash filter */
+ u16 rx_mode;
+
+ if (dev->flags & IFF_PROMISC) {
+ /* Unconditionally log net taps. */
+ net_drv(tp, KERN_NOTICE "%s: Promiscuous mode enabled.\n",
+ dev->name);
+ rx_mode =
+ AcceptBroadcast | AcceptMulticast | AcceptMyPhys |
+ AcceptAllPhys;
+ mc_filter[1] = mc_filter[0] = 0xffffffff;
+ } else if ((dev->mc_count > multicast_filter_limit) ||
+ (dev->flags & IFF_ALLMULTI)) {
+ /* Too many to filter perfectly -- accept all multicasts. */
+ rx_mode = AcceptBroadcast | AcceptMulticast | AcceptMyPhys;
+ mc_filter[1] = mc_filter[0] = 0xffffffff;
+ } else {
+ struct dev_mc_list *mclist;
+ unsigned int i;
+
+ rx_mode = AcceptBroadcast | AcceptMyPhys;
+ mc_filter[1] = mc_filter[0] = 0;
+ for (i = 0, mclist = dev->mc_list; mclist && i < dev->mc_count;
+ i++, mclist = mclist->next) {
+ int bit_nr =
+ ether_crc(ETH_ALEN, mclist->dmi_addr) >> 26;
+ mc_filter[bit_nr >> 5] |= 1 << (bit_nr & 31);
+ rx_mode |= AcceptMulticast;
+ }
+ }
+
+ spin_lock_irqsave(&tp->lock, flags);
+
+ SIS_W16(RxMacControl, rx_mode | 0x2);
+ SIS_W32(RxHashTable, mc_filter[0]);
+ SIS_W32(RxHashTable + 4, mc_filter[1]);
+
+ spin_unlock_irqrestore(&tp->lock, flags);
+}
+
+static void sis190_soft_reset(void __iomem *ioaddr)
+{
+ SIS_W32(IntrControl, 0x8000);
+ SIS_PCI_COMMIT();
+ msleep(1);
+ SIS_W32(IntrControl, 0x0);
+ sis190_asic_down(ioaddr);
+ msleep(1);
+}
+
+static void sis190_hw_start(struct net_device *dev)
+{
+ struct sis190_private *tp = netdev_priv(dev);
+ void __iomem *ioaddr = tp->mmio_addr;
+
+ sis190_soft_reset(ioaddr);
+
+ SIS_W32(TxDescStartAddr, tp->tx_dma);
+ SIS_W32(RxDescStartAddr, tp->rx_dma);
+
+ SIS_W32(IntrStatus, 0xffffffff);
+ SIS_W32(IntrMask, 0x0);
+ /*
+ * Default is 100Mbps.
+ * A bit strange: 100Mbps is 0x1801 elsewhere -- FR 2005/06/09
+ */
+ SIS_W16(StationControl, 0x1901);
+ SIS_W32(GMIIControl, 0x0);
+ SIS_W32(TxMacControl, 0x60);
+ SIS_W16(RxMacControl, 0x02);
+ SIS_W32(RxHashTable, 0x0);
+ SIS_W32(0x6c, 0x0);
+ SIS_W32(RxWolCtrl, 0x0);
+ SIS_W32(RxWolData, 0x0);
+
+ SIS_PCI_COMMIT();
+
+ sis190_set_rx_mode(dev);
+
+ /* Enable all known interrupts by setting the interrupt mask. */
+ SIS_W32(IntrMask, sis190_intr_mask);
+
+ SIS_W32(TxControl, 0x1a00 | CmdTxEnb);
+ SIS_W32(RxControl, 0x1a1d);
+
+ netif_start_queue(dev);
+}
+
+static void sis190_phy_task(void * data)
+{
+ struct net_device *dev = data;
+ struct sis190_private *tp = netdev_priv(dev);
+ void __iomem *ioaddr = tp->mmio_addr;
+ int phy_id = tp->mii_if.phy_id;
+ u16 val;
+
+ rtnl_lock();
+
+ val = mdio_read(ioaddr, phy_id, MII_BMCR);
+ if (val & BMCR_RESET) {
+ // FIXME: needlessly high ? -- FR 02/07/2005
+ mod_timer(&tp->timer, jiffies + HZ/10);
+ } else if (!(mdio_read_latched(ioaddr, phy_id, MII_BMSR) &
+ BMSR_ANEGCOMPLETE)) {
+ net_link(tp, KERN_WARNING "%s: PHY reset until link up.\n",
+ dev->name);
+ mdio_write(ioaddr, phy_id, MII_BMCR, val | BMCR_RESET);
+ mod_timer(&tp->timer, jiffies + SIS190_PHY_TIMEOUT);
+ } else {
+ /* Rejoice ! */
+ struct {
+ int val;
+ const char *msg;
+ u16 ctl;
+ } reg31[] = {
+ { LPA_1000XFULL | LPA_SLCT,
+ "1000 Mbps Full Duplex",
+ 0x01 | _1000bpsF },
+ { LPA_1000XHALF | LPA_SLCT,
+ "1000 Mbps Half Duplex",
+ 0x01 | _1000bpsH },
+ { LPA_100FULL,
+ "100 Mbps Full Duplex",
+ 0x01 | _100bpsF },
+ { LPA_100HALF,
+ "100 Mbps Half Duplex",
+ 0x01 | _100bpsH },
+ { LPA_10FULL,
+ "10 Mbps Full Duplex",
+ 0x01 | _10bpsF },
+ { LPA_10HALF,
+ "10 Mbps Half Duplex",
+ 0x01 | _10bpsH },
+ { 0, "unknown", 0x0000 }
+ }, *p;
+ u16 adv;
+
+ val = mdio_read(ioaddr, phy_id, 0x1f);
+ net_link(tp, KERN_INFO "%s: mii ext = %04x.\n", dev->name, val);
+
+ val = mdio_read(ioaddr, phy_id, MII_LPA);
+ adv = mdio_read(ioaddr, phy_id, MII_ADVERTISE);
+ net_link(tp, KERN_INFO "%s: mii lpa = %04x adv = %04x.\n",
+ dev->name, val, adv);
+
+ val &= adv;
+
+ for (p = reg31; p->ctl; p++) {
+ if ((val & p->val) == p->val)
+ break;
+ }
+ if (p->ctl)
+ SIS_W16(StationControl, p->ctl);
+ net_link(tp, KERN_INFO "%s: link on %s mode.\n", dev->name,
+ p->msg);
+ netif_carrier_on(dev);
+ }
+
+ rtnl_unlock();
+}
+
+static void sis190_phy_timer(unsigned long __opaque)
+{
+ struct net_device *dev = (struct net_device *)__opaque;
+ struct sis190_private *tp = netdev_priv(dev);
+
+ if (likely(netif_running(dev)))
+ schedule_work(&tp->phy_task);
+}
+
+static inline void sis190_delete_timer(struct net_device *dev)
+{
+ struct sis190_private *tp = netdev_priv(dev);
+
+ del_timer_sync(&tp->timer);
+}
+
+static inline void sis190_request_timer(struct net_device *dev)
+{
+ struct sis190_private *tp = netdev_priv(dev);
+ struct timer_list *timer = &tp->timer;
+
+ init_timer(timer);
+ timer->expires = jiffies + SIS190_PHY_TIMEOUT;
+ timer->data = (unsigned long)dev;
+ timer->function = sis190_phy_timer;
+ add_timer(timer);
+}
+
+static void sis190_set_rxbufsize(struct sis190_private *tp,
+ struct net_device *dev)
+{
+ unsigned int mtu = dev->mtu;
+
+ tp->rx_buf_sz = (mtu > RX_BUF_SIZE) ? mtu + ETH_HLEN + 8 : RX_BUF_SIZE;
+ /* RxDesc->size has a licence to kill the lower bits */
+ if (tp->rx_buf_sz & 0x07) {
+ tp->rx_buf_sz += 8;
+ tp->rx_buf_sz &= RX_BUF_MASK;
+ }
+}
+
+static int sis190_open(struct net_device *dev)
+{
+ struct sis190_private *tp = netdev_priv(dev);
+ struct pci_dev *pdev = tp->pci_dev;
+ int rc = -ENOMEM;
+
+ sis190_set_rxbufsize(tp, dev);
+
+ /*
+ * Rx and Tx descriptors need 256 bytes alignment.
+ * pci_alloc_consistent() guarantees a stronger alignment.
+ */
+ tp->TxDescRing = pci_alloc_consistent(pdev, TX_RING_BYTES, &tp->tx_dma);
+ if (!tp->TxDescRing)
+ goto out;
+
+ tp->RxDescRing = pci_alloc_consistent(pdev, RX_RING_BYTES, &tp->rx_dma);
+ if (!tp->RxDescRing)
+ goto err_free_tx_0;
+
+ rc = sis190_init_ring(dev);
+ if (rc < 0)
+ goto err_free_rx_1;
+
+ INIT_WORK(&tp->phy_task, sis190_phy_task, dev);
+
+ sis190_request_timer(dev);
+
+ rc = request_irq(dev->irq, sis190_interrupt, SA_SHIRQ, dev->name, dev);
+ if (rc < 0)
+ goto err_release_timer_2;
+
+ sis190_hw_start(dev);
+out:
+ return rc;
+
+err_release_timer_2:
+ sis190_delete_timer(dev);
+ sis190_rx_clear(tp);
+err_free_rx_1:
+ pci_free_consistent(tp->pci_dev, RX_RING_BYTES, tp->RxDescRing,
+ tp->rx_dma);
+err_free_tx_0:
+ pci_free_consistent(tp->pci_dev, TX_RING_BYTES, tp->TxDescRing,
+ tp->tx_dma);
+ goto out;
+}
+
+static void sis190_tx_clear(struct sis190_private *tp)
+{
+ unsigned int i;
+
+ for (i = 0; i < NUM_TX_DESC; i++) {
+ struct sk_buff *skb = tp->Tx_skbuff[i];
+
+ if (!skb)
+ continue;
+
+ sis190_unmap_tx_skb(tp->pci_dev, skb, tp->TxDescRing + i);
+ tp->Tx_skbuff[i] = NULL;
+ dev_kfree_skb(skb);
+
+ tp->stats.tx_dropped++;
+ }
+ tp->cur_tx = tp->dirty_tx = 0;
+}
+
+static void sis190_down(struct net_device *dev)
+{
+ struct sis190_private *tp = netdev_priv(dev);
+ void __iomem *ioaddr = tp->mmio_addr;
+ unsigned int poll_locked = 0;
+
+ sis190_delete_timer(dev);
+
+ netif_stop_queue(dev);
+
+ flush_scheduled_work();
+
+ do {
+ spin_lock_irq(&tp->lock);
+
+ sis190_asic_down(ioaddr);
+
+ spin_unlock_irq(&tp->lock);
+
+ synchronize_irq(dev->irq);
+
+ if (!poll_locked) {
+ netif_poll_disable(dev);
+ poll_locked++;
+ }
+
+ synchronize_sched();
+
+ } while (SIS_R32(IntrMask));
+
+ sis190_tx_clear(tp);
+ sis190_rx_clear(tp);
+}
+
+static int sis190_close(struct net_device *dev)
+{
+ struct sis190_private *tp = netdev_priv(dev);
+ struct pci_dev *pdev = tp->pci_dev;
+
+ sis190_down(dev);
+
+ free_irq(dev->irq, dev);
+
+ netif_poll_enable(dev);
+
+ pci_free_consistent(pdev, TX_RING_BYTES, tp->TxDescRing, tp->tx_dma);
+ pci_free_consistent(pdev, RX_RING_BYTES, tp->RxDescRing, tp->rx_dma);
+
+ tp->TxDescRing = NULL;
+ tp->RxDescRing = NULL;
+
+ return 0;
+}
+
+static int sis190_start_xmit(struct sk_buff *skb, struct net_device *dev)
+{
+ struct sis190_private *tp = netdev_priv(dev);
+ void __iomem *ioaddr = tp->mmio_addr;
+ u32 len, entry, dirty_tx;
+ struct TxDesc *desc;
+ dma_addr_t mapping;
+
+ if (unlikely(skb->len < ETH_ZLEN)) {
+ skb = skb_padto(skb, ETH_ZLEN);
+ if (!skb) {
+ tp->stats.tx_dropped++;
+ goto out;
+ }
+ len = ETH_ZLEN;
+ } else {
+ len = skb->len;
+ }
+
+ entry = tp->cur_tx % NUM_TX_DESC;
+ desc = tp->TxDescRing + entry;
+
+ if (unlikely(le32_to_cpu(desc->status) & OWNbit)) {
+ netif_stop_queue(dev);
+ net_tx_err(tp, KERN_ERR PFX
+ "%s: BUG! Tx Ring full when queue awake!\n",
+ dev->name);
+ return NETDEV_TX_BUSY;
+ }
+
+ mapping = pci_map_single(tp->pci_dev, skb->data, len, PCI_DMA_TODEVICE);
+
+ tp->Tx_skbuff[entry] = skb;
+
+ desc->PSize = cpu_to_le32(len);
+ desc->addr = cpu_to_le32(mapping);
+
+ desc->size = cpu_to_le32(len);
+ if (entry == (NUM_TX_DESC - 1))
+ desc->size |= cpu_to_le32(RingEnd);
+
+ wmb();
+
+ desc->status = cpu_to_le32(OWNbit | INTbit | DEFbit | CRCbit | PADbit);
+
+ tp->cur_tx++;
+
+ smp_wmb();
+
+ SIS_W32(TxControl, 0x1a00 | CmdReset | CmdTxEnb);
+
+ dev->trans_start = jiffies;
+
+ dirty_tx = tp->dirty_tx;
+ if ((tp->cur_tx - NUM_TX_DESC) == dirty_tx) {
+ netif_stop_queue(dev);
+ smp_rmb();
+ if (dirty_tx != tp->dirty_tx)
+ netif_wake_queue(dev);
+ }
+out:
+ return NETDEV_TX_OK;
+}
+
+static struct net_device_stats *sis190_get_stats(struct net_device *dev)
+{
+ struct sis190_private *tp = netdev_priv(dev);
+
+ return &tp->stats;
+}
+
+static void sis190_free_phy(struct list_head *first_phy)
+{
+ struct sis190_phy *cur, *next;
+
+ list_for_each_entry_safe(cur, next, first_phy, list) {
+ kfree(cur);
+ }
+}
+
+/**
+ * sis190_default_phy - Select default PHY for sis190 mac.
+ * @dev: the net device to probe for
+ *
+ * Select first detected PHY with link as default.
+ * If no one is link on, select PHY whose types is HOME as default.
+ * If HOME doesn't exist, select LAN.
+ */
+static u16 sis190_default_phy(struct net_device *dev)
+{
+ struct sis190_phy *phy, *phy_home, *phy_default, *phy_lan;
+ struct sis190_private *tp = netdev_priv(dev);
+ struct mii_if_info *mii_if = &tp->mii_if;
+ void __iomem *ioaddr = tp->mmio_addr;
+ u16 status;
+
+ phy_home = phy_default = phy_lan = NULL;
+
+ list_for_each_entry(phy, &tp->first_phy, list) {
+ status = mdio_read_latched(ioaddr, phy->phy_id, MII_BMSR);
+
+ // Link ON & Not select default PHY & not ghost PHY.
+ if ((status & BMSR_LSTATUS) &&
+ !phy_default &&
+ (phy->type != UNKNOWN)) {
+ phy_default = phy;
+ } else {
+ status = mdio_read(ioaddr, phy->phy_id, MII_BMCR);
+ mdio_write(ioaddr, phy->phy_id, MII_BMCR,
+ status | BMCR_ANENABLE | BMCR_ISOLATE);
+ if (phy->type == HOME)
+ phy_home = phy;
+ else if (phy->type == LAN)
+ phy_lan = phy;
+ }
+ }
+
+ if (!phy_default) {
+ if (phy_home)
+ phy_default = phy_home;
+ else if (phy_lan)
+ phy_default = phy_lan;
+ else
+ phy_default = list_entry(&tp->first_phy,
+ struct sis190_phy, list);
+ }
+
+ if (mii_if->phy_id != phy_default->phy_id) {
+ mii_if->phy_id = phy_default->phy_id;
+ net_probe(tp, KERN_INFO
+ "%s: Using transceiver at address %d as default.\n",
+ pci_name(tp->pci_dev), mii_if->phy_id);
+ }
+
+ status = mdio_read(ioaddr, mii_if->phy_id, MII_BMCR);
+ status &= (~BMCR_ISOLATE);
+
+ mdio_write(ioaddr, mii_if->phy_id, MII_BMCR, status);
+ status = mdio_read_latched(ioaddr, mii_if->phy_id, MII_BMSR);
+
+ return status;
+}
+
+static void sis190_init_phy(struct net_device *dev, struct sis190_private *tp,
+ struct sis190_phy *phy, unsigned int phy_id,
+ u16 mii_status)
+{
+ void __iomem *ioaddr = tp->mmio_addr;
+ struct mii_chip_info *p;
+
+ INIT_LIST_HEAD(&phy->list);
+ phy->status = mii_status;
+ phy->phy_id = phy_id;
+
+ phy->id[0] = mdio_read(ioaddr, phy_id, MII_PHYSID1);
+ phy->id[1] = mdio_read(ioaddr, phy_id, MII_PHYSID2);
+
+ for (p = mii_chip_table; p->type; p++) {
+ if ((p->id[0] == phy->id[0]) &&
+ (p->id[1] == (phy->id[1] & 0xfff0))) {
+ break;
+ }
+ }
+
+ if (p->id[1]) {
+ phy->type = (p->type == MIX) ?
+ ((mii_status & (BMSR_100FULL | BMSR_100HALF)) ?
+ LAN : HOME) : p->type;
+ } else
+ phy->type = UNKNOWN;
+
+ net_probe(tp, KERN_INFO "%s: %s transceiver at address %d.\n",
+ pci_name(tp->pci_dev),
+ (phy->type == UNKNOWN) ? "Unknown PHY" : p->name, phy_id);
+}
+
+/**
+ * sis190_mii_probe - Probe MII PHY for sis190
+ * @dev: the net device to probe for
+ *
+ * Search for total of 32 possible mii phy addresses.
+ * Identify and set current phy if found one,
+ * return error if it failed to found.
+ */
+static int __devinit sis190_mii_probe(struct net_device *dev)
+{
+ struct sis190_private *tp = netdev_priv(dev);
+ struct mii_if_info *mii_if = &tp->mii_if;
+ void __iomem *ioaddr = tp->mmio_addr;
+ int phy_id;
+ int rc = 0;
+
+ INIT_LIST_HEAD(&tp->first_phy);
+
+ for (phy_id = 0; phy_id < PHY_MAX_ADDR; phy_id++) {
+ struct sis190_phy *phy;
+ u16 status;
+
+ status = mdio_read_latched(ioaddr, phy_id, MII_BMSR);
+
+ // Try next mii if the current one is not accessible.
+ if (status == 0xffff || status == 0x0000)
+ continue;
+
+ phy = kmalloc(sizeof(*phy), GFP_KERNEL);
+ if (!phy) {
+ sis190_free_phy(&tp->first_phy);
+ rc = -ENOMEM;
+ goto out;
+ }
+
+ sis190_init_phy(dev, tp, phy, phy_id, status);
+
+ list_add(&tp->first_phy, &phy->list);
+ }
+
+ if (list_empty(&tp->first_phy)) {
+ net_probe(tp, KERN_INFO "%s: No MII transceivers found!\n",
+ pci_name(tp->pci_dev));
+ rc = -EIO;
+ goto out;
+ }
+
+ /* Select default PHY for mac */
+ sis190_default_phy(dev);
+
+ mii_if->dev = dev;
+ mii_if->mdio_read = __mdio_read;
+ mii_if->mdio_write = __mdio_write;
+ mii_if->phy_id_mask = PHY_ID_ANY;
+ mii_if->reg_num_mask = MII_REG_ANY;
+out:
+ return rc;
+}
+
+static void __devexit sis190_mii_remove(struct net_device *dev)
+{
+ struct sis190_private *tp = netdev_priv(dev);
+
+ sis190_free_phy(&tp->first_phy);
+}
+
+static void sis190_release_board(struct pci_dev *pdev)
+{
+ struct net_device *dev = pci_get_drvdata(pdev);
+ struct sis190_private *tp = netdev_priv(dev);
+
+ iounmap(tp->mmio_addr);
+ pci_release_regions(pdev);
+ pci_disable_device(pdev);
+ free_netdev(dev);
+}
+
+static struct net_device * __devinit sis190_init_board(struct pci_dev *pdev)
+{
+ struct sis190_private *tp;
+ struct net_device *dev;
+ void __iomem *ioaddr;
+ int rc;
+
+ dev = alloc_etherdev(sizeof(*tp));
+ if (!dev) {
+ net_drv(&debug, KERN_ERR PFX "unable to alloc new ethernet\n");
+ rc = -ENOMEM;
+ goto err_out_0;
+ }
+
+ SET_MODULE_OWNER(dev);
+ SET_NETDEV_DEV(dev, &pdev->dev);
+
+ tp = netdev_priv(dev);
+ tp->msg_enable = netif_msg_init(debug.msg_enable, SIS190_MSG_DEFAULT);
+
+ rc = pci_enable_device(pdev);
+ if (rc < 0) {
+ net_probe(tp, KERN_ERR "%s: enable failure\n", pci_name(pdev));
+ goto err_free_dev_1;
+ }
+
+ rc = -ENODEV;
+
+ if (!(pci_resource_flags(pdev, 0) & IORESOURCE_MEM)) {
+ net_probe(tp, KERN_ERR "%s: region #0 is no MMIO resource.\n",
+ pci_name(pdev));
+ goto err_pci_disable_2;
+ }
+ if (pci_resource_len(pdev, 0) < SIS190_REGS_SIZE) {
+ net_probe(tp, KERN_ERR "%s: invalid PCI region size(s).\n",
+ pci_name(pdev));
+ goto err_pci_disable_2;
+ }
+
+ rc = pci_request_regions(pdev, DRV_NAME);
+ if (rc < 0) {
+ net_probe(tp, KERN_ERR PFX "%s: could not request regions.\n",
+ pci_name(pdev));
+ goto err_pci_disable_2;
+ }
+
+ rc = pci_set_dma_mask(pdev, DMA_32BIT_MASK);
+ if (rc < 0) {
+ net_probe(tp, KERN_ERR "%s: DMA configuration failed.\n",
+ pci_name(pdev));
+ goto err_free_res_3;
+ }
+
+ pci_set_master(pdev);
+
+ ioaddr = ioremap(pci_resource_start(pdev, 0), SIS190_REGS_SIZE);
+ if (!ioaddr) {
+ net_probe(tp, KERN_ERR "%s: cannot remap MMIO, aborting\n",
+ pci_name(pdev));
+ rc = -EIO;
+ goto err_free_res_3;
+ }
+
+ tp->pci_dev = pdev;
+ tp->mmio_addr = ioaddr;
+
+ sis190_irq_mask_and_ack(ioaddr);
+
+ sis190_soft_reset(ioaddr);
+out:
+ return dev;
+
+err_free_res_3:
+ pci_release_regions(pdev);
+err_pci_disable_2:
+ pci_disable_device(pdev);
+err_free_dev_1:
+ free_netdev(dev);
+err_out_0:
+ dev = ERR_PTR(rc);
+ goto out;
+}
+
+static void sis190_tx_timeout(struct net_device *dev)
+{
+ struct sis190_private *tp = netdev_priv(dev);
+ void __iomem *ioaddr = tp->mmio_addr;
+ u8 tmp8;
+
+ /* Disable Tx, if not already */
+ tmp8 = SIS_R8(TxControl);
+ if (tmp8 & CmdTxEnb)
+ SIS_W8(TxControl, tmp8 & ~CmdTxEnb);
+
+
+ net_tx_err(tp, KERN_INFO "%s: Transmit timeout, status %08x %08x.\n",
+ dev->name, SIS_R32(TxControl), SIS_R32(TxSts));
+
+ /* Disable interrupts by clearing the interrupt mask. */
+ SIS_W32(IntrMask, 0x0000);
+
+ /* Stop a shared interrupt from scavenging while we are. */
+ spin_lock_irq(&tp->lock);
+ sis190_tx_clear(tp);
+ spin_unlock_irq(&tp->lock);
+
+ /* ...and finally, reset everything. */
+ sis190_hw_start(dev);
+
+ netif_wake_queue(dev);
+}
+
+static int __devinit sis190_get_mac_addr_from_eeprom(struct pci_dev *pdev,
+ struct net_device *dev)
+{
+ struct sis190_private *tp = netdev_priv(dev);
+ void __iomem *ioaddr = tp->mmio_addr;
+ u16 sig;
+ int i;
+
+ net_probe(tp, KERN_INFO "%s: Read MAC address from EEPROM\n",
+ pci_name(pdev));
+
+ /* Check to see if there is a sane EEPROM */
+ sig = (u16) sis190_read_eeprom(ioaddr, EEPROMSignature);
+
+ if ((sig == 0xffff) || (sig == 0x0000)) {
+ net_probe(tp, KERN_INFO "%s: Error EEPROM read %x.\n",
+ pci_name(pdev), sig);
+ return -EIO;
+ }
+
+ /* Get MAC address from EEPROM */
+ for (i = 0; i < MAC_ADDR_LEN / 2; i++) {
+ __le16 w = sis190_read_eeprom(ioaddr, EEPROMMACAddr + i);
+
+ ((u16 *)dev->dev_addr)[0] = le16_to_cpu(w);
+ }
+
+ return 0;
+}
+
+/**
+ * sis190_get_mac_addr_from_apc - Get MAC address for SiS965 model
+ * @pdev: PCI device
+ * @dev: network device to get address for
+ *
+ * SiS965 model, use APC CMOS RAM to store MAC address.
+ * APC CMOS RAM is accessed through ISA bridge.
+ * MAC address is read into @net_dev->dev_addr.
+ */
+static int __devinit sis190_get_mac_addr_from_apc(struct pci_dev *pdev,
+ struct net_device *dev)
+{
+ struct sis190_private *tp = netdev_priv(dev);
+ struct pci_dev *isa_bridge;
+ u8 reg, tmp8;
+ int i;
+
+ net_probe(tp, KERN_INFO "%s: Read MAC address from APC.\n",
+ pci_name(pdev));
+
+ isa_bridge = pci_get_device(PCI_VENDOR_ID_SI, 0x0965, NULL);
+ if (!isa_bridge) {
+ net_probe(tp, KERN_INFO "%s: Can not find ISA bridge.\n",
+ pci_name(pdev));
+ return -EIO;
+ }
+
+ /* Enable port 78h & 79h to access APC Registers. */
+ pci_read_config_byte(isa_bridge, 0x48, &tmp8);
+ reg = (tmp8 & ~0x02);
+ pci_write_config_byte(isa_bridge, 0x48, reg);
+ udelay(50);
+ pci_read_config_byte(isa_bridge, 0x48, &reg);
+
+ for (i = 0; i < MAC_ADDR_LEN; i++) {
+ outb(0x9 + i, 0x78);
+ dev->dev_addr[i] = inb(0x79);
+ }
+
+ outb(0x12, 0x78);
+ reg = inb(0x79);
+
+ /* Restore the value to ISA Bridge */
+ pci_write_config_byte(isa_bridge, 0x48, tmp8);
+ pci_dev_put(isa_bridge);
+
+ return 0;
+}
+
+/**
+ * sis190_init_rxfilter - Initialize the Rx filter
+ * @dev: network device to initialize
+ *
+ * Set receive filter address to our MAC address
+ * and enable packet filtering.
+ */
+static inline void sis190_init_rxfilter(struct net_device *dev)
+{
+ struct sis190_private *tp = netdev_priv(dev);
+ void __iomem *ioaddr = tp->mmio_addr;
+ u16 ctl;
+ int i;
+
+ ctl = SIS_R16(RxMacControl);
+ /*
+ * Disable packet filtering before setting filter.
+ * Note: SiS's driver writes 32 bits but RxMacControl is 16 bits
+ * only and followed by RxMacAddr (6 bytes). Strange. -- FR
+ */
+ SIS_W16(RxMacControl, ctl & ~0x0f00);
+
+ for (i = 0; i < MAC_ADDR_LEN; i++)
+ SIS_W8(RxMacAddr + i, dev->dev_addr[i]);
+
+ SIS_W16(RxMacControl, ctl);
+ SIS_PCI_COMMIT();
+}
+
+static int sis190_get_mac_addr(struct pci_dev *pdev, struct net_device *dev)
+{
+ u8 from;
+
+ pci_read_config_byte(pdev, 0x73, &from);
+
+ return (from & 0x00000001) ?
+ sis190_get_mac_addr_from_apc(pdev, dev) :
+ sis190_get_mac_addr_from_eeprom(pdev, dev);
+}
+
+static void sis190_set_speed_auto(struct net_device *dev)
+{
+ struct sis190_private *tp = netdev_priv(dev);
+ void __iomem *ioaddr = tp->mmio_addr;
+ int phy_id = tp->mii_if.phy_id;
+ int val;
+
+ net_link(tp, KERN_INFO "%s: Enabling Auto-negotiation.\n", dev->name);
+
+ val = mdio_read(ioaddr, phy_id, MII_ADVERTISE);
+
+ // Enable 10/100 Full/Half Mode, leave MII_ADVERTISE bit4:0
+ // unchanged.
+ mdio_write(ioaddr, phy_id, MII_ADVERTISE, (val & ADVERTISE_SLCT) |
+ ADVERTISE_100FULL | ADVERTISE_10FULL |
+ ADVERTISE_100HALF | ADVERTISE_10HALF);
+
+ // Enable 1000 Full Mode.
+ mdio_write(ioaddr, phy_id, MII_CTRL1000, ADVERTISE_1000FULL);
+
+ // Enable auto-negotiation and restart auto-negotiation.
+ mdio_write(ioaddr, phy_id, MII_BMCR,
+ BMCR_ANENABLE | BMCR_ANRESTART | BMCR_RESET);
+}
+
+static int sis190_get_settings(struct net_device *dev, struct ethtool_cmd *cmd)
+{
+ struct sis190_private *tp = netdev_priv(dev);
+
+ return mii_ethtool_gset(&tp->mii_if, cmd);
+}
+
+static int sis190_set_settings(struct net_device *dev, struct ethtool_cmd *cmd)
+{
+ struct sis190_private *tp = netdev_priv(dev);
+
+ return mii_ethtool_sset(&tp->mii_if, cmd);
+}
+
+static void sis190_get_drvinfo(struct net_device *dev,
+ struct ethtool_drvinfo *info)
+{
+ struct sis190_private *tp = netdev_priv(dev);
+
+ strcpy(info->driver, DRV_NAME);
+ strcpy(info->version, DRV_VERSION);
+ strcpy(info->bus_info, pci_name(tp->pci_dev));
+}
+
+static int sis190_get_regs_len(struct net_device *dev)
+{
+ return SIS190_REGS_SIZE;
+}
+
+static void sis190_get_regs(struct net_device *dev, struct ethtool_regs *regs,
+ void *p)
+{
+ struct sis190_private *tp = netdev_priv(dev);
+ unsigned long flags;
+
+ if (regs->len > SIS190_REGS_SIZE)
+ regs->len = SIS190_REGS_SIZE;
+
+ spin_lock_irqsave(&tp->lock, flags);
+ memcpy_fromio(p, tp->mmio_addr, regs->len);
+ spin_unlock_irqrestore(&tp->lock, flags);
+}
+
+static int sis190_nway_reset(struct net_device *dev)
+{
+ struct sis190_private *tp = netdev_priv(dev);
+
+ return mii_nway_restart(&tp->mii_if);
+}
+
+static u32 sis190_get_msglevel(struct net_device *dev)
+{
+ struct sis190_private *tp = netdev_priv(dev);
+
+ return tp->msg_enable;
+}
+
+static void sis190_set_msglevel(struct net_device *dev, u32 value)
+{
+ struct sis190_private *tp = netdev_priv(dev);
+
+ tp->msg_enable = value;
+}
+
+static struct ethtool_ops sis190_ethtool_ops = {
+ .get_settings = sis190_get_settings,
+ .set_settings = sis190_set_settings,
+ .get_drvinfo = sis190_get_drvinfo,
+ .get_regs_len = sis190_get_regs_len,
+ .get_regs = sis190_get_regs,
+ .get_link = ethtool_op_get_link,
+ .get_msglevel = sis190_get_msglevel,
+ .set_msglevel = sis190_set_msglevel,
+ .nway_reset = sis190_nway_reset,
+};
+
+static int sis190_ioctl(struct net_device *dev, struct ifreq *ifr, int cmd)
+{
+ struct sis190_private *tp = netdev_priv(dev);
+
+ return !netif_running(dev) ? -EINVAL :
+ generic_mii_ioctl(&tp->mii_if, if_mii(ifr), cmd, NULL);
+}
+
+static int __devinit sis190_init_one(struct pci_dev *pdev,
+ const struct pci_device_id *ent)
+{
+ static int printed_version = 0;
+ struct sis190_private *tp;
+ struct net_device *dev;
+ void __iomem *ioaddr;
+ int rc;
+
+ if (!printed_version) {
+ net_drv(&debug, KERN_INFO SIS190_DRIVER_NAME " loaded.\n");
+ printed_version = 1;
+ }
+
+ dev = sis190_init_board(pdev);
+ if (IS_ERR(dev)) {
+ rc = PTR_ERR(dev);
+ goto out;
+ }
+
+ tp = netdev_priv(dev);
+ ioaddr = tp->mmio_addr;
+
+ rc = sis190_get_mac_addr(pdev, dev);
+ if (rc < 0)
+ goto err_release_board;
+
+ sis190_init_rxfilter(dev);
+
+ INIT_WORK(&tp->phy_task, sis190_phy_task, dev);
+
+ dev->open = sis190_open;
+ dev->stop = sis190_close;
+ dev->do_ioctl = sis190_ioctl;
+ dev->get_stats = sis190_get_stats;
+ dev->tx_timeout = sis190_tx_timeout;
+ dev->watchdog_timeo = SIS190_TX_TIMEOUT;
+ dev->hard_start_xmit = sis190_start_xmit;
+#ifdef CONFIG_NET_POLL_CONTROLLER
+ dev->poll_controller = sis190_netpoll;
+#endif
+ dev->set_multicast_list = sis190_set_rx_mode;
+ SET_ETHTOOL_OPS(dev, &sis190_ethtool_ops);
+ dev->irq = pdev->irq;
+ dev->base_addr = (unsigned long) 0xdead;
+
+ spin_lock_init(&tp->lock);
+
+ rc = sis190_mii_probe(dev);
+ if (rc < 0)
+ goto err_release_board;
+
+ rc = register_netdev(dev);
+ if (rc < 0)
+ goto err_remove_mii;
+
+ pci_set_drvdata(pdev, dev);
+
+ net_probe(tp, KERN_INFO "%s: %s at %p (IRQ: %d), "
+ "%2.2x:%2.2x:%2.2x:%2.2x:%2.2x:%2.2x\n",
+ pci_name(pdev), sis_chip_info[ent->driver_data].name,
+ ioaddr, dev->irq,
+ dev->dev_addr[0], dev->dev_addr[1],
+ dev->dev_addr[2], dev->dev_addr[3],
+ dev->dev_addr[4], dev->dev_addr[5]);
+
+ netif_carrier_off(dev);
+
+ sis190_set_speed_auto(dev);
+out:
+ return rc;
+
+err_remove_mii:
+ sis190_mii_remove(dev);
+err_release_board:
+ sis190_release_board(pdev);
+ goto out;
+}
+
+static void __devexit sis190_remove_one(struct pci_dev *pdev)
+{
+ struct net_device *dev = pci_get_drvdata(pdev);
+
+ sis190_mii_remove(dev);
+ unregister_netdev(dev);
+ sis190_release_board(pdev);
+ pci_set_drvdata(pdev, NULL);
+}
+
+static struct pci_driver sis190_pci_driver = {
+ .name = DRV_NAME,
+ .id_table = sis190_pci_tbl,
+ .probe = sis190_init_one,
+ .remove = __devexit_p(sis190_remove_one),
+};
+
+static int __init sis190_init_module(void)
+{
+ return pci_module_init(&sis190_pci_driver);
+}
+
+static void __exit sis190_cleanup_module(void)
+{
+ pci_unregister_driver(&sis190_pci_driver);
+}
+
+module_init(sis190_init_module);
+module_exit(sis190_cleanup_module);
diff --git a/drivers/net/skge.c b/drivers/net/skge.c
index f15739481d6..d7c98515fdf 100644
--- a/drivers/net/skge.c
+++ b/drivers/net/skge.c
@@ -42,7 +42,7 @@
#include "skge.h"
#define DRV_NAME "skge"
-#define DRV_VERSION "0.8"
+#define DRV_VERSION "0.9"
#define PFX DRV_NAME " "
#define DEFAULT_TX_RING_SIZE 128
@@ -79,8 +79,8 @@ static const struct pci_device_id skge_id_table[] = {
{ PCI_DEVICE(PCI_VENDOR_ID_MARVELL, 0x4320) },
{ PCI_DEVICE(PCI_VENDOR_ID_MARVELL, 0x5005) }, /* Belkin */
{ PCI_DEVICE(PCI_VENDOR_ID_CNET, PCI_DEVICE_ID_CNET_GIGACARD) },
- { PCI_DEVICE(PCI_VENDOR_ID_LINKSYS, PCI_DEVICE_ID_LINKSYS_EG1032) },
{ PCI_DEVICE(PCI_VENDOR_ID_LINKSYS, PCI_DEVICE_ID_LINKSYS_EG1064) },
+ { PCI_VENDOR_ID_LINKSYS, 0x1032, PCI_ANY_ID, 0x0015, },
{ 0 }
};
MODULE_DEVICE_TABLE(pci, skge_id_table);
@@ -189,7 +189,7 @@ static u32 skge_supported_modes(const struct skge_hw *hw)
{
u32 supported;
- if (iscopper(hw)) {
+ if (hw->copper) {
supported = SUPPORTED_10baseT_Half
| SUPPORTED_10baseT_Full
| SUPPORTED_100baseT_Half
@@ -222,7 +222,7 @@ static int skge_get_settings(struct net_device *dev,
ecmd->transceiver = XCVR_INTERNAL;
ecmd->supported = skge_supported_modes(hw);
- if (iscopper(hw)) {
+ if (hw->copper) {
ecmd->port = PORT_TP;
ecmd->phy_address = hw->phy_addr;
} else
@@ -876,6 +876,9 @@ static int skge_rx_fill(struct skge_port *skge)
static void skge_link_up(struct skge_port *skge)
{
+ skge_write8(skge->hw, SK_REG(skge->port, LNK_LED_REG),
+ LED_BLK_OFF|LED_SYNC_OFF|LED_ON);
+
netif_carrier_on(skge->netdev);
if (skge->tx_avail > MAX_SKB_FRAGS + 1)
netif_wake_queue(skge->netdev);
@@ -894,6 +897,7 @@ static void skge_link_up(struct skge_port *skge)
static void skge_link_down(struct skge_port *skge)
{
+ skge_write8(skge->hw, SK_REG(skge->port, LNK_LED_REG), LED_OFF);
netif_carrier_off(skge->netdev);
netif_stop_queue(skge->netdev);
@@ -1599,7 +1603,7 @@ static void yukon_init(struct skge_hw *hw, int port)
adv = PHY_AN_CSMA;
if (skge->autoneg == AUTONEG_ENABLE) {
- if (iscopper(hw)) {
+ if (hw->copper) {
if (skge->advertising & ADVERTISED_1000baseT_Full)
ct1000 |= PHY_M_1000C_AFD;
if (skge->advertising & ADVERTISED_1000baseT_Half)
@@ -1691,7 +1695,7 @@ static void yukon_mac_init(struct skge_hw *hw, int port)
/* Set hardware config mode */
reg = GPC_INT_POL_HI | GPC_DIS_FC | GPC_DIS_SLEEP |
GPC_ENA_XC | GPC_ANEG_ADV_ALL_M | GPC_ENA_PAUSE;
- reg |= iscopper(hw) ? GPC_HWCFG_GMII_COP : GPC_HWCFG_GMII_FIB;
+ reg |= hw->copper ? GPC_HWCFG_GMII_COP : GPC_HWCFG_GMII_FIB;
/* Clear GMC reset */
skge_write32(hw, SK_REG(port, GPHY_CTRL), reg | GPC_RST_SET);
@@ -1780,7 +1784,12 @@ static void yukon_mac_init(struct skge_hw *hw, int port)
reg &= ~GMF_RX_F_FL_ON;
skge_write8(hw, SK_REG(port, RX_GMF_CTRL_T), GMF_RST_CLR);
skge_write16(hw, SK_REG(port, RX_GMF_CTRL_T), reg);
- skge_write16(hw, SK_REG(port, RX_GMF_FL_THR), RX_GMF_FL_THR_DEF);
+ /*
+ * because Pause Packet Truncation in GMAC is not working
+ * we have to increase the Flush Threshold to 64 bytes
+ * in order to flush pause packets in Rx FIFO on Yukon-1
+ */
+ skge_write16(hw, SK_REG(port, RX_GMF_FL_THR), RX_GMF_FL_THR_DEF+1);
/* Configure Tx MAC FIFO */
skge_write8(hw, SK_REG(port, TX_GMF_CTRL_T), GMF_RST_CLR);
@@ -2670,18 +2679,6 @@ static void skge_error_irq(struct skge_hw *hw)
/* Timestamp (unused) overflow */
if (hwstatus & IS_IRQ_TIST_OV)
skge_write8(hw, GMAC_TI_ST_CTRL, GMT_ST_CLR_IRQ);
-
- if (hwstatus & IS_IRQ_SENSOR) {
- /* no sensors on 32-bit Yukon */
- if (!(skge_read16(hw, B0_CTST) & CS_BUS_SLOT_SZ)) {
- printk(KERN_ERR PFX "ignoring bogus sensor interrups\n");
- skge_write32(hw, B0_HWE_IMSK,
- IS_ERR_MSK & ~IS_IRQ_SENSOR);
- } else
- printk(KERN_WARNING PFX "sensor interrupt\n");
- }
-
-
}
if (hwstatus & IS_RAM_RD_PAR) {
@@ -2712,9 +2709,10 @@ static void skge_error_irq(struct skge_hw *hw)
skge_pci_clear(hw);
+ /* if error still set then just ignore it */
hwstatus = skge_read32(hw, B0_HWE_ISRC);
if (hwstatus & IS_IRQ_STAT) {
- printk(KERN_WARNING PFX "IRQ status %x: still set ignoring hardware errors\n",
+ pr_debug("IRQ status %x: still set ignoring hardware errors\n",
hwstatus);
hw->intr_mask &= ~IS_HW_ERR;
}
@@ -2876,7 +2874,7 @@ static const char *skge_board_name(const struct skge_hw *hw)
static int skge_reset(struct skge_hw *hw)
{
u16 ctst;
- u8 t8, mac_cfg;
+ u8 t8, mac_cfg, pmd_type, phy_type;
int i;
ctst = skge_read16(hw, B0_CTST);
@@ -2895,18 +2893,19 @@ static int skge_reset(struct skge_hw *hw)
ctst & (CS_CLK_RUN_HOT|CS_CLK_RUN_RST|CS_CLK_RUN_ENA));
hw->chip_id = skge_read8(hw, B2_CHIP_ID);
- hw->phy_type = skge_read8(hw, B2_E_1) & 0xf;
- hw->pmd_type = skge_read8(hw, B2_PMD_TYP);
+ phy_type = skge_read8(hw, B2_E_1) & 0xf;
+ pmd_type = skge_read8(hw, B2_PMD_TYP);
+ hw->copper = (pmd_type == 'T' || pmd_type == '1');
switch (hw->chip_id) {
case CHIP_ID_GENESIS:
- switch (hw->phy_type) {
+ switch (phy_type) {
case SK_PHY_BCOM:
hw->phy_addr = PHY_ADDR_BCOM;
break;
default:
printk(KERN_ERR PFX "%s: unsupported phy type 0x%x\n",
- pci_name(hw->pdev), hw->phy_type);
+ pci_name(hw->pdev), phy_type);
return -EOPNOTSUPP;
}
break;
@@ -2914,13 +2913,10 @@ static int skge_reset(struct skge_hw *hw)
case CHIP_ID_YUKON:
case CHIP_ID_YUKON_LITE:
case CHIP_ID_YUKON_LP:
- if (hw->phy_type < SK_PHY_MARV_COPPER && hw->pmd_type != 'S')
- hw->phy_type = SK_PHY_MARV_COPPER;
+ if (phy_type < SK_PHY_MARV_COPPER && pmd_type != 'S')
+ hw->copper = 1;
hw->phy_addr = PHY_ADDR_MARV;
- if (!iscopper(hw))
- hw->phy_type = SK_PHY_MARV_FIBER;
-
break;
default:
@@ -2948,12 +2944,20 @@ static int skge_reset(struct skge_hw *hw)
else
hw->ram_size = t8 * 4096;
+ hw->intr_mask = IS_HW_ERR | IS_EXT_REG;
if (hw->chip_id == CHIP_ID_GENESIS)
genesis_init(hw);
else {
/* switch power to VCC (WA for VAUX problem) */
skge_write8(hw, B0_POWER_CTRL,
PC_VAUX_ENA | PC_VCC_ENA | PC_VAUX_OFF | PC_VCC_ON);
+ /* avoid boards with stuck Hardware error bits */
+ if ((skge_read32(hw, B0_ISRC) & IS_HW_ERR) &&
+ (skge_read32(hw, B0_HWE_ISRC) & IS_IRQ_SENSOR)) {
+ printk(KERN_WARNING PFX "stuck hardware sensor bit\n");
+ hw->intr_mask &= ~IS_HW_ERR;
+ }
+
for (i = 0; i < hw->ports; i++) {
skge_write16(hw, SK_REG(i, GMAC_LINK_CTRL), GMLC_RST_SET);
skge_write16(hw, SK_REG(i, GMAC_LINK_CTRL), GMLC_RST_CLR);
@@ -2994,7 +2998,6 @@ static int skge_reset(struct skge_hw *hw)
skge_write32(hw, B2_IRQM_INI, skge_usecs2clk(hw, 100));
skge_write32(hw, B2_IRQM_CTRL, TIM_START);
- hw->intr_mask = IS_HW_ERR | IS_EXT_REG;
skge_write32(hw, B0_IMSK, hw->intr_mask);
if (hw->chip_id != CHIP_ID_GENESIS)
diff --git a/drivers/net/skge.h b/drivers/net/skge.h
index b432f1bb816..f1680beb8e6 100644
--- a/drivers/net/skge.h
+++ b/drivers/net/skge.h
@@ -214,8 +214,6 @@ enum {
/* B2_IRQM_HWE_MSK 32 bit IRQ Moderation HW Error Mask */
enum {
- IS_ERR_MSK = 0x00003fff,/* All Error bits */
-
IS_IRQ_TIST_OV = 1<<13, /* Time Stamp Timer Overflow (YUKON only) */
IS_IRQ_SENSOR = 1<<12, /* IRQ from Sensor (YUKON only) */
IS_IRQ_MST_ERR = 1<<11, /* IRQ master error detected */
@@ -230,6 +228,12 @@ enum {
IS_M2_PAR_ERR = 1<<2, /* MAC 2 Parity Error */
IS_R1_PAR_ERR = 1<<1, /* Queue R1 Parity Error */
IS_R2_PAR_ERR = 1<<0, /* Queue R2 Parity Error */
+
+ IS_ERR_MSK = IS_IRQ_MST_ERR | IS_IRQ_STAT
+ | IS_NO_STAT_M1 | IS_NO_STAT_M2
+ | IS_RAM_RD_PAR | IS_RAM_WR_PAR
+ | IS_M1_PAR_ERR | IS_M2_PAR_ERR
+ | IS_R1_PAR_ERR | IS_R2_PAR_ERR,
};
/* B2_TST_CTRL1 8 bit Test Control Register 1 */
@@ -2456,24 +2460,17 @@ struct skge_hw {
u8 chip_id;
u8 chip_rev;
- u8 phy_type;
- u8 pmd_type;
- u16 phy_addr;
+ u8 copper;
u8 ports;
u32 ram_size;
u32 ram_offset;
+ u16 phy_addr;
struct tasklet_struct ext_tasklet;
spinlock_t phy_lock;
};
-
-static inline int iscopper(const struct skge_hw *hw)
-{
- return (hw->pmd_type == 'T');
-}
-
enum {
FLOW_MODE_NONE = 0, /* No Flow-Control */
FLOW_MODE_LOC_SEND = 1, /* Local station sends PAUSE */
diff --git a/drivers/net/smc-ultra.c b/drivers/net/smc-ultra.c
index 6d9dae60a69..ba8593ac3f8 100644
--- a/drivers/net/smc-ultra.c
+++ b/drivers/net/smc-ultra.c
@@ -68,6 +68,7 @@ static const char version[] =
#include <linux/etherdevice.h>
#include <asm/io.h>
+#include <asm/irq.h>
#include <asm/system.h>
#include "8390.h"
diff --git a/drivers/net/sonic.c b/drivers/net/sonic.c
index cdc9cc873e0..90b818a8de6 100644
--- a/drivers/net/sonic.c
+++ b/drivers/net/sonic.c
@@ -1,6 +1,11 @@
/*
* sonic.c
*
+ * (C) 2005 Finn Thain
+ *
+ * Converted to DMA API, added zero-copy buffer handling, and
+ * (from the mac68k project) introduced dhd's support for 16-bit cards.
+ *
* (C) 1996,1998 by Thomas Bogendoerfer (tsbogend@alpha.franken.de)
*
* This driver is based on work from Andreas Busse, but most of
@@ -9,12 +14,23 @@
* (C) 1995 by Andreas Busse (andy@waldorf-gmbh.de)
*
* Core code included by system sonic drivers
+ *
+ * And... partially rewritten again by David Huggins-Daines in order
+ * to cope with screwed up Macintosh NICs that may or may not use
+ * 16-bit DMA.
+ *
+ * (C) 1999 David Huggins-Daines <dhd@debian.org>
+ *
*/
/*
* Sources: Olivetti M700-10 Risc Personal Computer hardware handbook,
* National Semiconductors data sheet for the DP83932B Sonic Ethernet
* controller, and the files "8390.c" and "skeleton.c" in this directory.
+ *
+ * Additional sources: Nat Semi data sheet for the DP83932C and Nat Semi
+ * Application Note AN-746, the files "lance.c" and "ibmlana.c". See also
+ * the NetBSD file "sys/arch/mac68k/dev/if_sn.c".
*/
@@ -28,6 +44,9 @@
*/
static int sonic_open(struct net_device *dev)
{
+ struct sonic_local *lp = netdev_priv(dev);
+ int i;
+
if (sonic_debug > 2)
printk("sonic_open: initializing sonic driver.\n");
@@ -40,14 +59,59 @@ static int sonic_open(struct net_device *dev)
* This means that during execution of the handler interrupt are disabled
* covering another bug otherwise corrupting data. This doesn't mean
* this glue works ok under all situations.
+ *
+ * Note (dhd): this also appears to prevent lockups on the Macintrash
+ * when more than one Ethernet card is installed (knock on wood)
+ *
+ * Note (fthain): whether the above is still true is anyones guess. Certainly
+ * the buffer handling algorithms will not tolerate re-entrance without some
+ * mutual exclusion added. Anyway, the memcpy has now been eliminated from the
+ * rx code to make this a faster "fast interrupt".
*/
-// if (sonic_request_irq(dev->irq, &sonic_interrupt, 0, "sonic", dev)) {
- if (sonic_request_irq(dev->irq, &sonic_interrupt, SA_INTERRUPT,
- "sonic", dev)) {
- printk("\n%s: unable to get IRQ %d .\n", dev->name, dev->irq);
+ if (request_irq(dev->irq, &sonic_interrupt, SONIC_IRQ_FLAG, "sonic", dev)) {
+ printk(KERN_ERR "\n%s: unable to get IRQ %d .\n", dev->name, dev->irq);
return -EAGAIN;
}
+ for (i = 0; i < SONIC_NUM_RRS; i++) {
+ struct sk_buff *skb = dev_alloc_skb(SONIC_RBSIZE + 2);
+ if (skb == NULL) {
+ while(i > 0) { /* free any that were allocated successfully */
+ i--;
+ dev_kfree_skb(lp->rx_skb[i]);
+ lp->rx_skb[i] = NULL;
+ }
+ printk(KERN_ERR "%s: couldn't allocate receive buffers\n",
+ dev->name);
+ return -ENOMEM;
+ }
+ skb->dev = dev;
+ /* align IP header unless DMA requires otherwise */
+ if (SONIC_BUS_SCALE(lp->dma_bitmode) == 2)
+ skb_reserve(skb, 2);
+ lp->rx_skb[i] = skb;
+ }
+
+ for (i = 0; i < SONIC_NUM_RRS; i++) {
+ dma_addr_t laddr = dma_map_single(lp->device, skb_put(lp->rx_skb[i], SONIC_RBSIZE),
+ SONIC_RBSIZE, DMA_FROM_DEVICE);
+ if (!laddr) {
+ while(i > 0) { /* free any that were mapped successfully */
+ i--;
+ dma_unmap_single(lp->device, lp->rx_laddr[i], SONIC_RBSIZE, DMA_FROM_DEVICE);
+ lp->rx_laddr[i] = (dma_addr_t)0;
+ }
+ for (i = 0; i < SONIC_NUM_RRS; i++) {
+ dev_kfree_skb(lp->rx_skb[i]);
+ lp->rx_skb[i] = NULL;
+ }
+ printk(KERN_ERR "%s: couldn't map rx DMA buffers\n",
+ dev->name);
+ return -ENOMEM;
+ }
+ lp->rx_laddr[i] = laddr;
+ }
+
/*
* Initialize the SONIC
*/
@@ -67,7 +131,8 @@ static int sonic_open(struct net_device *dev)
*/
static int sonic_close(struct net_device *dev)
{
- unsigned int base_addr = dev->base_addr;
+ struct sonic_local *lp = netdev_priv(dev);
+ int i;
if (sonic_debug > 2)
printk("sonic_close\n");
@@ -77,20 +142,56 @@ static int sonic_close(struct net_device *dev)
/*
* stop the SONIC, disable interrupts
*/
- SONIC_WRITE(SONIC_ISR, 0x7fff);
SONIC_WRITE(SONIC_IMR, 0);
+ SONIC_WRITE(SONIC_ISR, 0x7fff);
SONIC_WRITE(SONIC_CMD, SONIC_CR_RST);
- sonic_free_irq(dev->irq, dev); /* release the IRQ */
+ /* unmap and free skbs that haven't been transmitted */
+ for (i = 0; i < SONIC_NUM_TDS; i++) {
+ if(lp->tx_laddr[i]) {
+ dma_unmap_single(lp->device, lp->tx_laddr[i], lp->tx_len[i], DMA_TO_DEVICE);
+ lp->tx_laddr[i] = (dma_addr_t)0;
+ }
+ if(lp->tx_skb[i]) {
+ dev_kfree_skb(lp->tx_skb[i]);
+ lp->tx_skb[i] = NULL;
+ }
+ }
+
+ /* unmap and free the receive buffers */
+ for (i = 0; i < SONIC_NUM_RRS; i++) {
+ if(lp->rx_laddr[i]) {
+ dma_unmap_single(lp->device, lp->rx_laddr[i], SONIC_RBSIZE, DMA_FROM_DEVICE);
+ lp->rx_laddr[i] = (dma_addr_t)0;
+ }
+ if(lp->rx_skb[i]) {
+ dev_kfree_skb(lp->rx_skb[i]);
+ lp->rx_skb[i] = NULL;
+ }
+ }
+
+ free_irq(dev->irq, dev); /* release the IRQ */
return 0;
}
static void sonic_tx_timeout(struct net_device *dev)
{
- struct sonic_local *lp = (struct sonic_local *) dev->priv;
- printk("%s: transmit timed out.\n", dev->name);
-
+ struct sonic_local *lp = netdev_priv(dev);
+ int i;
+ /* Stop the interrupts for this */
+ SONIC_WRITE(SONIC_IMR, 0);
+ /* We could resend the original skbs. Easier to re-initialise. */
+ for (i = 0; i < SONIC_NUM_TDS; i++) {
+ if(lp->tx_laddr[i]) {
+ dma_unmap_single(lp->device, lp->tx_laddr[i], lp->tx_len[i], DMA_TO_DEVICE);
+ lp->tx_laddr[i] = (dma_addr_t)0;
+ }
+ if(lp->tx_skb[i]) {
+ dev_kfree_skb(lp->tx_skb[i]);
+ lp->tx_skb[i] = NULL;
+ }
+ }
/* Try to restart the adaptor. */
sonic_init(dev);
lp->stats.tx_errors++;
@@ -100,60 +201,92 @@ static void sonic_tx_timeout(struct net_device *dev)
/*
* transmit packet
+ *
+ * Appends new TD during transmission thus avoiding any TX interrupts
+ * until we run out of TDs.
+ * This routine interacts closely with the ISR in that it may,
+ * set tx_skb[i]
+ * reset the status flags of the new TD
+ * set and reset EOL flags
+ * stop the tx queue
+ * The ISR interacts with this routine in various ways. It may,
+ * reset tx_skb[i]
+ * test the EOL and status flags of the TDs
+ * wake the tx queue
+ * Concurrently with all of this, the SONIC is potentially writing to
+ * the status flags of the TDs.
+ * Until some mutual exclusion is added, this code will not work with SMP. However,
+ * MIPS Jazz machines and m68k Macs were all uni-processor machines.
*/
+
static int sonic_send_packet(struct sk_buff *skb, struct net_device *dev)
{
- struct sonic_local *lp = (struct sonic_local *) dev->priv;
- unsigned int base_addr = dev->base_addr;
- unsigned int laddr;
- int entry, length;
-
- netif_stop_queue(dev);
+ struct sonic_local *lp = netdev_priv(dev);
+ dma_addr_t laddr;
+ int length;
+ int entry = lp->next_tx;
if (sonic_debug > 2)
printk("sonic_send_packet: skb=%p, dev=%p\n", skb, dev);
+ length = skb->len;
+ if (length < ETH_ZLEN) {
+ skb = skb_padto(skb, ETH_ZLEN);
+ if (skb == NULL)
+ return 0;
+ length = ETH_ZLEN;
+ }
+
/*
* Map the packet data into the logical DMA address space
*/
- if ((laddr = vdma_alloc(CPHYSADDR(skb->data), skb->len)) == ~0UL) {
- printk("%s: no VDMA entry for transmit available.\n",
- dev->name);
+
+ laddr = dma_map_single(lp->device, skb->data, length, DMA_TO_DEVICE);
+ if (!laddr) {
+ printk(KERN_ERR "%s: failed to map tx DMA buffer.\n", dev->name);
dev_kfree_skb(skb);
- netif_start_queue(dev);
return 1;
}
- entry = lp->cur_tx & SONIC_TDS_MASK;
+
+ sonic_tda_put(dev, entry, SONIC_TD_STATUS, 0); /* clear status */
+ sonic_tda_put(dev, entry, SONIC_TD_FRAG_COUNT, 1); /* single fragment */
+ sonic_tda_put(dev, entry, SONIC_TD_PKTSIZE, length); /* length of packet */
+ sonic_tda_put(dev, entry, SONIC_TD_FRAG_PTR_L, laddr & 0xffff);
+ sonic_tda_put(dev, entry, SONIC_TD_FRAG_PTR_H, laddr >> 16);
+ sonic_tda_put(dev, entry, SONIC_TD_FRAG_SIZE, length);
+ sonic_tda_put(dev, entry, SONIC_TD_LINK,
+ sonic_tda_get(dev, entry, SONIC_TD_LINK) | SONIC_EOL);
+
+ /*
+ * Must set tx_skb[entry] only after clearing status, and
+ * before clearing EOL and before stopping queue
+ */
+ wmb();
+ lp->tx_len[entry] = length;
lp->tx_laddr[entry] = laddr;
lp->tx_skb[entry] = skb;
- length = (skb->len < ETH_ZLEN) ? ETH_ZLEN : skb->len;
- flush_cache_all();
+ wmb();
+ sonic_tda_put(dev, lp->eol_tx, SONIC_TD_LINK,
+ sonic_tda_get(dev, lp->eol_tx, SONIC_TD_LINK) & ~SONIC_EOL);
+ lp->eol_tx = entry;
- /*
- * Setup the transmit descriptor and issue the transmit command.
- */
- lp->tda[entry].tx_status = 0; /* clear status */
- lp->tda[entry].tx_frag_count = 1; /* single fragment */
- lp->tda[entry].tx_pktsize = length; /* length of packet */
- lp->tda[entry].tx_frag_ptr_l = laddr & 0xffff;
- lp->tda[entry].tx_frag_ptr_h = laddr >> 16;
- lp->tda[entry].tx_frag_size = length;
- lp->cur_tx++;
- lp->stats.tx_bytes += length;
+ lp->next_tx = (entry + 1) & SONIC_TDS_MASK;
+ if (lp->tx_skb[lp->next_tx] != NULL) {
+ /* The ring is full, the ISR has yet to process the next TD. */
+ if (sonic_debug > 3)
+ printk("%s: stopping queue\n", dev->name);
+ netif_stop_queue(dev);
+ /* after this packet, wait for ISR to free up some TDAs */
+ } else netif_start_queue(dev);
if (sonic_debug > 2)
- printk("sonic_send_packet: issueing Tx command\n");
+ printk("sonic_send_packet: issuing Tx command\n");
SONIC_WRITE(SONIC_CMD, SONIC_CR_TXP);
dev->trans_start = jiffies;
- if (lp->cur_tx < lp->dirty_tx + SONIC_NUM_TDS)
- netif_start_queue(dev);
- else
- lp->tx_full = 1;
-
return 0;
}
@@ -164,175 +297,199 @@ static int sonic_send_packet(struct sk_buff *skb, struct net_device *dev)
static irqreturn_t sonic_interrupt(int irq, void *dev_id, struct pt_regs *regs)
{
struct net_device *dev = (struct net_device *) dev_id;
- unsigned int base_addr = dev->base_addr;
- struct sonic_local *lp;
+ struct sonic_local *lp = netdev_priv(dev);
int status;
if (dev == NULL) {
- printk("sonic_interrupt: irq %d for unknown device.\n", irq);
+ printk(KERN_ERR "sonic_interrupt: irq %d for unknown device.\n", irq);
return IRQ_NONE;
}
- lp = (struct sonic_local *) dev->priv;
-
- status = SONIC_READ(SONIC_ISR);
- SONIC_WRITE(SONIC_ISR, 0x7fff); /* clear all bits */
-
- if (sonic_debug > 2)
- printk("sonic_interrupt: ISR=%x\n", status);
-
- if (status & SONIC_INT_PKTRX) {
- sonic_rx(dev); /* got packet(s) */
- }
-
- if (status & SONIC_INT_TXDN) {
- int dirty_tx = lp->dirty_tx;
-
- while (dirty_tx < lp->cur_tx) {
- int entry = dirty_tx & SONIC_TDS_MASK;
- int status = lp->tda[entry].tx_status;
+ if (!(status = SONIC_READ(SONIC_ISR) & SONIC_IMR_DEFAULT))
+ return IRQ_NONE;
- if (sonic_debug > 3)
- printk
- ("sonic_interrupt: status %d, cur_tx %d, dirty_tx %d\n",
- status, lp->cur_tx, lp->dirty_tx);
+ do {
+ if (status & SONIC_INT_PKTRX) {
+ if (sonic_debug > 2)
+ printk("%s: packet rx\n", dev->name);
+ sonic_rx(dev); /* got packet(s) */
+ SONIC_WRITE(SONIC_ISR, SONIC_INT_PKTRX); /* clear the interrupt */
+ }
- if (status == 0) {
- /* It still hasn't been Txed, kick the sonic again */
- SONIC_WRITE(SONIC_CMD, SONIC_CR_TXP);
- break;
- }
+ if (status & SONIC_INT_TXDN) {
+ int entry = lp->cur_tx;
+ int td_status;
+ int freed_some = 0;
- /* put back EOL and free descriptor */
- lp->tda[entry].tx_frag_count = 0;
- lp->tda[entry].tx_status = 0;
-
- if (status & 0x0001)
- lp->stats.tx_packets++;
- else {
- lp->stats.tx_errors++;
- if (status & 0x0642)
- lp->stats.tx_aborted_errors++;
- if (status & 0x0180)
- lp->stats.tx_carrier_errors++;
- if (status & 0x0020)
- lp->stats.tx_window_errors++;
- if (status & 0x0004)
- lp->stats.tx_fifo_errors++;
- }
+ /* At this point, cur_tx is the index of a TD that is one of:
+ * unallocated/freed (status set & tx_skb[entry] clear)
+ * allocated and sent (status set & tx_skb[entry] set )
+ * allocated and not yet sent (status clear & tx_skb[entry] set )
+ * still being allocated by sonic_send_packet (status clear & tx_skb[entry] clear)
+ */
- /* We must free the original skb */
- if (lp->tx_skb[entry]) {
+ if (sonic_debug > 2)
+ printk("%s: tx done\n", dev->name);
+
+ while (lp->tx_skb[entry] != NULL) {
+ if ((td_status = sonic_tda_get(dev, entry, SONIC_TD_STATUS)) == 0)
+ break;
+
+ if (td_status & 0x0001) {
+ lp->stats.tx_packets++;
+ lp->stats.tx_bytes += sonic_tda_get(dev, entry, SONIC_TD_PKTSIZE);
+ } else {
+ lp->stats.tx_errors++;
+ if (td_status & 0x0642)
+ lp->stats.tx_aborted_errors++;
+ if (td_status & 0x0180)
+ lp->stats.tx_carrier_errors++;
+ if (td_status & 0x0020)
+ lp->stats.tx_window_errors++;
+ if (td_status & 0x0004)
+ lp->stats.tx_fifo_errors++;
+ }
+
+ /* We must free the original skb */
dev_kfree_skb_irq(lp->tx_skb[entry]);
- lp->tx_skb[entry] = 0;
+ lp->tx_skb[entry] = NULL;
+ /* and unmap DMA buffer */
+ dma_unmap_single(lp->device, lp->tx_laddr[entry], lp->tx_len[entry], DMA_TO_DEVICE);
+ lp->tx_laddr[entry] = (dma_addr_t)0;
+ freed_some = 1;
+
+ if (sonic_tda_get(dev, entry, SONIC_TD_LINK) & SONIC_EOL) {
+ entry = (entry + 1) & SONIC_TDS_MASK;
+ break;
+ }
+ entry = (entry + 1) & SONIC_TDS_MASK;
}
- /* and the VDMA address */
- vdma_free(lp->tx_laddr[entry]);
- dirty_tx++;
- }
- if (lp->tx_full
- && dirty_tx + SONIC_NUM_TDS > lp->cur_tx + 2) {
- /* The ring is no longer full, clear tbusy. */
- lp->tx_full = 0;
- netif_wake_queue(dev);
+ if (freed_some || lp->tx_skb[entry] == NULL)
+ netif_wake_queue(dev); /* The ring is no longer full */
+ lp->cur_tx = entry;
+ SONIC_WRITE(SONIC_ISR, SONIC_INT_TXDN); /* clear the interrupt */
}
- lp->dirty_tx = dirty_tx;
- }
+ /*
+ * check error conditions
+ */
+ if (status & SONIC_INT_RFO) {
+ if (sonic_debug > 1)
+ printk("%s: rx fifo overrun\n", dev->name);
+ lp->stats.rx_fifo_errors++;
+ SONIC_WRITE(SONIC_ISR, SONIC_INT_RFO); /* clear the interrupt */
+ }
+ if (status & SONIC_INT_RDE) {
+ if (sonic_debug > 1)
+ printk("%s: rx descriptors exhausted\n", dev->name);
+ lp->stats.rx_dropped++;
+ SONIC_WRITE(SONIC_ISR, SONIC_INT_RDE); /* clear the interrupt */
+ }
+ if (status & SONIC_INT_RBAE) {
+ if (sonic_debug > 1)
+ printk("%s: rx buffer area exceeded\n", dev->name);
+ lp->stats.rx_dropped++;
+ SONIC_WRITE(SONIC_ISR, SONIC_INT_RBAE); /* clear the interrupt */
+ }
- /*
- * check error conditions
- */
- if (status & SONIC_INT_RFO) {
- printk("%s: receive fifo underrun\n", dev->name);
- lp->stats.rx_fifo_errors++;
- }
- if (status & SONIC_INT_RDE) {
- printk("%s: receive descriptors exhausted\n", dev->name);
- lp->stats.rx_dropped++;
- }
- if (status & SONIC_INT_RBE) {
- printk("%s: receive buffer exhausted\n", dev->name);
- lp->stats.rx_dropped++;
- }
- if (status & SONIC_INT_RBAE) {
- printk("%s: receive buffer area exhausted\n", dev->name);
- lp->stats.rx_dropped++;
- }
+ /* counter overruns; all counters are 16bit wide */
+ if (status & SONIC_INT_FAE) {
+ lp->stats.rx_frame_errors += 65536;
+ SONIC_WRITE(SONIC_ISR, SONIC_INT_FAE); /* clear the interrupt */
+ }
+ if (status & SONIC_INT_CRC) {
+ lp->stats.rx_crc_errors += 65536;
+ SONIC_WRITE(SONIC_ISR, SONIC_INT_CRC); /* clear the interrupt */
+ }
+ if (status & SONIC_INT_MP) {
+ lp->stats.rx_missed_errors += 65536;
+ SONIC_WRITE(SONIC_ISR, SONIC_INT_MP); /* clear the interrupt */
+ }
- /* counter overruns; all counters are 16bit wide */
- if (status & SONIC_INT_FAE)
- lp->stats.rx_frame_errors += 65536;
- if (status & SONIC_INT_CRC)
- lp->stats.rx_crc_errors += 65536;
- if (status & SONIC_INT_MP)
- lp->stats.rx_missed_errors += 65536;
+ /* transmit error */
+ if (status & SONIC_INT_TXER) {
+ if ((SONIC_READ(SONIC_TCR) & SONIC_TCR_FU) && (sonic_debug > 2))
+ printk(KERN_ERR "%s: tx fifo underrun\n", dev->name);
+ SONIC_WRITE(SONIC_ISR, SONIC_INT_TXER); /* clear the interrupt */
+ }
- /* transmit error */
- if (status & SONIC_INT_TXER)
- lp->stats.tx_errors++;
+ /* bus retry */
+ if (status & SONIC_INT_BR) {
+ printk(KERN_ERR "%s: Bus retry occurred! Device interrupt disabled.\n",
+ dev->name);
+ /* ... to help debug DMA problems causing endless interrupts. */
+ /* Bounce the eth interface to turn on the interrupt again. */
+ SONIC_WRITE(SONIC_IMR, 0);
+ SONIC_WRITE(SONIC_ISR, SONIC_INT_BR); /* clear the interrupt */
+ }
- /*
- * clear interrupt bits and return
- */
- SONIC_WRITE(SONIC_ISR, status);
+ /* load CAM done */
+ if (status & SONIC_INT_LCD)
+ SONIC_WRITE(SONIC_ISR, SONIC_INT_LCD); /* clear the interrupt */
+ } while((status = SONIC_READ(SONIC_ISR) & SONIC_IMR_DEFAULT));
return IRQ_HANDLED;
}
/*
- * We have a good packet(s), get it/them out of the buffers.
+ * We have a good packet(s), pass it/them up the network stack.
*/
static void sonic_rx(struct net_device *dev)
{
- unsigned int base_addr = dev->base_addr;
- struct sonic_local *lp = (struct sonic_local *) dev->priv;
- sonic_rd_t *rd = &lp->rda[lp->cur_rx & SONIC_RDS_MASK];
+ struct sonic_local *lp = netdev_priv(dev);
int status;
-
- while (rd->in_use == 0) {
- struct sk_buff *skb;
+ int entry = lp->cur_rx;
+
+ while (sonic_rda_get(dev, entry, SONIC_RD_IN_USE) == 0) {
+ struct sk_buff *used_skb;
+ struct sk_buff *new_skb;
+ dma_addr_t new_laddr;
+ u16 bufadr_l;
+ u16 bufadr_h;
int pkt_len;
- unsigned char *pkt_ptr;
- status = rd->rx_status;
- if (sonic_debug > 3)
- printk("status %x, cur_rx %d, cur_rra %x\n",
- status, lp->cur_rx, lp->cur_rra);
+ status = sonic_rda_get(dev, entry, SONIC_RD_STATUS);
if (status & SONIC_RCR_PRX) {
- pkt_len = rd->rx_pktlen;
- pkt_ptr =
- (char *)
- sonic_chiptomem((rd->rx_pktptr_h << 16) +
- rd->rx_pktptr_l);
-
- if (sonic_debug > 3)
- printk
- ("pktptr %p (rba %p) h:%x l:%x, bsize h:%x l:%x\n",
- pkt_ptr, lp->rba, rd->rx_pktptr_h,
- rd->rx_pktptr_l,
- SONIC_READ(SONIC_RBWC1),
- SONIC_READ(SONIC_RBWC0));
-
/* Malloc up new buffer. */
- skb = dev_alloc_skb(pkt_len + 2);
- if (skb == NULL) {
- printk
- ("%s: Memory squeeze, dropping packet.\n",
- dev->name);
+ new_skb = dev_alloc_skb(SONIC_RBSIZE + 2);
+ if (new_skb == NULL) {
+ printk(KERN_ERR "%s: Memory squeeze, dropping packet.\n", dev->name);
+ lp->stats.rx_dropped++;
+ break;
+ }
+ new_skb->dev = dev;
+ /* provide 16 byte IP header alignment unless DMA requires otherwise */
+ if(SONIC_BUS_SCALE(lp->dma_bitmode) == 2)
+ skb_reserve(new_skb, 2);
+
+ new_laddr = dma_map_single(lp->device, skb_put(new_skb, SONIC_RBSIZE),
+ SONIC_RBSIZE, DMA_FROM_DEVICE);
+ if (!new_laddr) {
+ dev_kfree_skb(new_skb);
+ printk(KERN_ERR "%s: Failed to map rx buffer, dropping packet.\n", dev->name);
lp->stats.rx_dropped++;
break;
}
- skb->dev = dev;
- skb_reserve(skb, 2); /* 16 byte align */
- skb_put(skb, pkt_len); /* Make room */
- eth_copy_and_sum(skb, pkt_ptr, pkt_len, 0);
- skb->protocol = eth_type_trans(skb, dev);
- netif_rx(skb); /* pass the packet to upper layers */
+
+ /* now we have a new skb to replace it, pass the used one up the stack */
+ dma_unmap_single(lp->device, lp->rx_laddr[entry], SONIC_RBSIZE, DMA_FROM_DEVICE);
+ used_skb = lp->rx_skb[entry];
+ pkt_len = sonic_rda_get(dev, entry, SONIC_RD_PKTLEN);
+ skb_trim(used_skb, pkt_len);
+ used_skb->protocol = eth_type_trans(used_skb, dev);
+ netif_rx(used_skb);
dev->last_rx = jiffies;
lp->stats.rx_packets++;
lp->stats.rx_bytes += pkt_len;
+ /* and insert the new skb */
+ lp->rx_laddr[entry] = new_laddr;
+ lp->rx_skb[entry] = new_skb;
+
+ bufadr_l = (unsigned long)new_laddr & 0xffff;
+ bufadr_h = (unsigned long)new_laddr >> 16;
+ sonic_rra_put(dev, entry, SONIC_RR_BUFADR_L, bufadr_l);
+ sonic_rra_put(dev, entry, SONIC_RR_BUFADR_H, bufadr_h);
} else {
/* This should only happen, if we enable accepting broken packets. */
lp->stats.rx_errors++;
@@ -341,29 +498,35 @@ static void sonic_rx(struct net_device *dev)
if (status & SONIC_RCR_CRCR)
lp->stats.rx_crc_errors++;
}
-
- rd->in_use = 1;
- rd = &lp->rda[(++lp->cur_rx) & SONIC_RDS_MASK];
- /* now give back the buffer to the receive buffer area */
if (status & SONIC_RCR_LPKT) {
/*
- * this was the last packet out of the current receice buffer
+ * this was the last packet out of the current receive buffer
* give the buffer back to the SONIC
*/
- lp->cur_rra += sizeof(sonic_rr_t);
- if (lp->cur_rra >
- (lp->rra_laddr +
- (SONIC_NUM_RRS -
- 1) * sizeof(sonic_rr_t))) lp->cur_rra =
- lp->rra_laddr;
- SONIC_WRITE(SONIC_RWP, lp->cur_rra & 0xffff);
+ lp->cur_rwp += SIZEOF_SONIC_RR * SONIC_BUS_SCALE(lp->dma_bitmode);
+ if (lp->cur_rwp >= lp->rra_end) lp->cur_rwp = lp->rra_laddr & 0xffff;
+ SONIC_WRITE(SONIC_RWP, lp->cur_rwp);
+ if (SONIC_READ(SONIC_ISR) & SONIC_INT_RBE) {
+ if (sonic_debug > 2)
+ printk("%s: rx buffer exhausted\n", dev->name);
+ SONIC_WRITE(SONIC_ISR, SONIC_INT_RBE); /* clear the flag */
+ }
} else
- printk
- ("%s: rx desc without RCR_LPKT. Shouldn't happen !?\n",
+ printk(KERN_ERR "%s: rx desc without RCR_LPKT. Shouldn't happen !?\n",
dev->name);
+ /*
+ * give back the descriptor
+ */
+ sonic_rda_put(dev, entry, SONIC_RD_LINK,
+ sonic_rda_get(dev, entry, SONIC_RD_LINK) | SONIC_EOL);
+ sonic_rda_put(dev, entry, SONIC_RD_IN_USE, 1);
+ sonic_rda_put(dev, lp->eol_rx, SONIC_RD_LINK,
+ sonic_rda_get(dev, lp->eol_rx, SONIC_RD_LINK) & ~SONIC_EOL);
+ lp->eol_rx = entry;
+ lp->cur_rx = entry = (entry + 1) & SONIC_RDS_MASK;
}
/*
- * If any worth-while packets have been received, dev_rint()
+ * If any worth-while packets have been received, netif_rx()
* has done a mark_bh(NET_BH) for us and will work on them
* when we get to the bottom-half routine.
*/
@@ -376,8 +539,7 @@ static void sonic_rx(struct net_device *dev)
*/
static struct net_device_stats *sonic_get_stats(struct net_device *dev)
{
- struct sonic_local *lp = (struct sonic_local *) dev->priv;
- unsigned int base_addr = dev->base_addr;
+ struct sonic_local *lp = netdev_priv(dev);
/* read the tally counter from the SONIC and reset them */
lp->stats.rx_crc_errors += SONIC_READ(SONIC_CRCT);
@@ -396,8 +558,7 @@ static struct net_device_stats *sonic_get_stats(struct net_device *dev)
*/
static void sonic_multicast_list(struct net_device *dev)
{
- struct sonic_local *lp = (struct sonic_local *) dev->priv;
- unsigned int base_addr = dev->base_addr;
+ struct sonic_local *lp = netdev_priv(dev);
unsigned int rcr;
struct dev_mc_list *dmi = dev->mc_list;
unsigned char *addr;
@@ -413,20 +574,15 @@ static void sonic_multicast_list(struct net_device *dev)
rcr |= SONIC_RCR_AMC;
} else {
if (sonic_debug > 2)
- printk
- ("sonic_multicast_list: mc_count %d\n",
- dev->mc_count);
- lp->cda.cam_enable = 1; /* always enable our own address */
+ printk("sonic_multicast_list: mc_count %d\n", dev->mc_count);
+ sonic_set_cam_enable(dev, 1); /* always enable our own address */
for (i = 1; i <= dev->mc_count; i++) {
addr = dmi->dmi_addr;
dmi = dmi->next;
- lp->cda.cam_desc[i].cam_cap0 =
- addr[1] << 8 | addr[0];
- lp->cda.cam_desc[i].cam_cap1 =
- addr[3] << 8 | addr[2];
- lp->cda.cam_desc[i].cam_cap2 =
- addr[5] << 8 | addr[4];
- lp->cda.cam_enable |= (1 << i);
+ sonic_cda_put(dev, i, SONIC_CD_CAP0, addr[1] << 8 | addr[0]);
+ sonic_cda_put(dev, i, SONIC_CD_CAP1, addr[3] << 8 | addr[2]);
+ sonic_cda_put(dev, i, SONIC_CD_CAP2, addr[5] << 8 | addr[4]);
+ sonic_set_cam_enable(dev, sonic_get_cam_enable(dev) | (1 << i));
}
SONIC_WRITE(SONIC_CDC, 16);
/* issue Load CAM command */
@@ -447,19 +603,16 @@ static void sonic_multicast_list(struct net_device *dev)
*/
static int sonic_init(struct net_device *dev)
{
- unsigned int base_addr = dev->base_addr;
unsigned int cmd;
- struct sonic_local *lp = (struct sonic_local *) dev->priv;
- unsigned int rra_start;
- unsigned int rra_end;
+ struct sonic_local *lp = netdev_priv(dev);
int i;
/*
* put the Sonic into software-reset mode and
* disable all interrupts
*/
- SONIC_WRITE(SONIC_ISR, 0x7fff);
SONIC_WRITE(SONIC_IMR, 0);
+ SONIC_WRITE(SONIC_ISR, 0x7fff);
SONIC_WRITE(SONIC_CMD, SONIC_CR_RST);
/*
@@ -475,34 +628,32 @@ static int sonic_init(struct net_device *dev)
if (sonic_debug > 2)
printk("sonic_init: initialize receive resource area\n");
- rra_start = lp->rra_laddr & 0xffff;
- rra_end =
- (rra_start + (SONIC_NUM_RRS * sizeof(sonic_rr_t))) & 0xffff;
-
for (i = 0; i < SONIC_NUM_RRS; i++) {
- lp->rra[i].rx_bufadr_l =
- (lp->rba_laddr + i * SONIC_RBSIZE) & 0xffff;
- lp->rra[i].rx_bufadr_h =
- (lp->rba_laddr + i * SONIC_RBSIZE) >> 16;
- lp->rra[i].rx_bufsize_l = SONIC_RBSIZE >> 1;
- lp->rra[i].rx_bufsize_h = 0;
+ u16 bufadr_l = (unsigned long)lp->rx_laddr[i] & 0xffff;
+ u16 bufadr_h = (unsigned long)lp->rx_laddr[i] >> 16;
+ sonic_rra_put(dev, i, SONIC_RR_BUFADR_L, bufadr_l);
+ sonic_rra_put(dev, i, SONIC_RR_BUFADR_H, bufadr_h);
+ sonic_rra_put(dev, i, SONIC_RR_BUFSIZE_L, SONIC_RBSIZE >> 1);
+ sonic_rra_put(dev, i, SONIC_RR_BUFSIZE_H, 0);
}
/* initialize all RRA registers */
- SONIC_WRITE(SONIC_RSA, rra_start);
- SONIC_WRITE(SONIC_REA, rra_end);
- SONIC_WRITE(SONIC_RRP, rra_start);
- SONIC_WRITE(SONIC_RWP, rra_end);
+ lp->rra_end = (lp->rra_laddr + SONIC_NUM_RRS * SIZEOF_SONIC_RR *
+ SONIC_BUS_SCALE(lp->dma_bitmode)) & 0xffff;
+ lp->cur_rwp = (lp->rra_laddr + (SONIC_NUM_RRS - 1) * SIZEOF_SONIC_RR *
+ SONIC_BUS_SCALE(lp->dma_bitmode)) & 0xffff;
+
+ SONIC_WRITE(SONIC_RSA, lp->rra_laddr & 0xffff);
+ SONIC_WRITE(SONIC_REA, lp->rra_end);
+ SONIC_WRITE(SONIC_RRP, lp->rra_laddr & 0xffff);
+ SONIC_WRITE(SONIC_RWP, lp->cur_rwp);
SONIC_WRITE(SONIC_URRA, lp->rra_laddr >> 16);
- SONIC_WRITE(SONIC_EOBC, (SONIC_RBSIZE - 2) >> 1);
-
- lp->cur_rra =
- lp->rra_laddr + (SONIC_NUM_RRS - 1) * sizeof(sonic_rr_t);
+ SONIC_WRITE(SONIC_EOBC, (SONIC_RBSIZE >> 1) - (lp->dma_bitmode ? 2 : 1));
/* load the resource pointers */
if (sonic_debug > 3)
- printk("sonic_init: issueing RRRA command\n");
-
+ printk("sonic_init: issuing RRRA command\n");
+
SONIC_WRITE(SONIC_CMD, SONIC_CR_RRRA);
i = 0;
while (i++ < 100) {
@@ -511,27 +662,30 @@ static int sonic_init(struct net_device *dev)
}
if (sonic_debug > 2)
- printk("sonic_init: status=%x\n", SONIC_READ(SONIC_CMD));
-
+ printk("sonic_init: status=%x i=%d\n", SONIC_READ(SONIC_CMD), i);
+
/*
* Initialize the receive descriptors so that they
* become a circular linked list, ie. let the last
* descriptor point to the first again.
*/
if (sonic_debug > 2)
- printk("sonic_init: initialize receive descriptors\n");
- for (i = 0; i < SONIC_NUM_RDS; i++) {
- lp->rda[i].rx_status = 0;
- lp->rda[i].rx_pktlen = 0;
- lp->rda[i].rx_pktptr_l = 0;
- lp->rda[i].rx_pktptr_h = 0;
- lp->rda[i].rx_seqno = 0;
- lp->rda[i].in_use = 1;
- lp->rda[i].link =
- lp->rda_laddr + (i + 1) * sizeof(sonic_rd_t);
+ printk("sonic_init: initialize receive descriptors\n");
+ for (i=0; i<SONIC_NUM_RDS; i++) {
+ sonic_rda_put(dev, i, SONIC_RD_STATUS, 0);
+ sonic_rda_put(dev, i, SONIC_RD_PKTLEN, 0);
+ sonic_rda_put(dev, i, SONIC_RD_PKTPTR_L, 0);
+ sonic_rda_put(dev, i, SONIC_RD_PKTPTR_H, 0);
+ sonic_rda_put(dev, i, SONIC_RD_SEQNO, 0);
+ sonic_rda_put(dev, i, SONIC_RD_IN_USE, 1);
+ sonic_rda_put(dev, i, SONIC_RD_LINK,
+ lp->rda_laddr +
+ ((i+1) * SIZEOF_SONIC_RD * SONIC_BUS_SCALE(lp->dma_bitmode)));
}
/* fix last descriptor */
- lp->rda[SONIC_NUM_RDS - 1].link = lp->rda_laddr;
+ sonic_rda_put(dev, SONIC_NUM_RDS - 1, SONIC_RD_LINK,
+ (lp->rda_laddr & 0xffff) | SONIC_EOL);
+ lp->eol_rx = SONIC_NUM_RDS - 1;
lp->cur_rx = 0;
SONIC_WRITE(SONIC_URDA, lp->rda_laddr >> 16);
SONIC_WRITE(SONIC_CRDA, lp->rda_laddr & 0xffff);
@@ -542,34 +696,34 @@ static int sonic_init(struct net_device *dev)
if (sonic_debug > 2)
printk("sonic_init: initialize transmit descriptors\n");
for (i = 0; i < SONIC_NUM_TDS; i++) {
- lp->tda[i].tx_status = 0;
- lp->tda[i].tx_config = 0;
- lp->tda[i].tx_pktsize = 0;
- lp->tda[i].tx_frag_count = 0;
- lp->tda[i].link =
- (lp->tda_laddr +
- (i + 1) * sizeof(sonic_td_t)) | SONIC_END_OF_LINKS;
+ sonic_tda_put(dev, i, SONIC_TD_STATUS, 0);
+ sonic_tda_put(dev, i, SONIC_TD_CONFIG, 0);
+ sonic_tda_put(dev, i, SONIC_TD_PKTSIZE, 0);
+ sonic_tda_put(dev, i, SONIC_TD_FRAG_COUNT, 0);
+ sonic_tda_put(dev, i, SONIC_TD_LINK,
+ (lp->tda_laddr & 0xffff) +
+ (i + 1) * SIZEOF_SONIC_TD * SONIC_BUS_SCALE(lp->dma_bitmode));
+ lp->tx_skb[i] = NULL;
}
- lp->tda[SONIC_NUM_TDS - 1].link =
- (lp->tda_laddr & 0xffff) | SONIC_END_OF_LINKS;
+ /* fix last descriptor */
+ sonic_tda_put(dev, SONIC_NUM_TDS - 1, SONIC_TD_LINK,
+ (lp->tda_laddr & 0xffff));
SONIC_WRITE(SONIC_UTDA, lp->tda_laddr >> 16);
SONIC_WRITE(SONIC_CTDA, lp->tda_laddr & 0xffff);
- lp->cur_tx = lp->dirty_tx = 0;
-
+ lp->cur_tx = lp->next_tx = 0;
+ lp->eol_tx = SONIC_NUM_TDS - 1;
+
/*
* put our own address to CAM desc[0]
*/
- lp->cda.cam_desc[0].cam_cap0 =
- dev->dev_addr[1] << 8 | dev->dev_addr[0];
- lp->cda.cam_desc[0].cam_cap1 =
- dev->dev_addr[3] << 8 | dev->dev_addr[2];
- lp->cda.cam_desc[0].cam_cap2 =
- dev->dev_addr[5] << 8 | dev->dev_addr[4];
- lp->cda.cam_enable = 1;
+ sonic_cda_put(dev, 0, SONIC_CD_CAP0, dev->dev_addr[1] << 8 | dev->dev_addr[0]);
+ sonic_cda_put(dev, 0, SONIC_CD_CAP1, dev->dev_addr[3] << 8 | dev->dev_addr[2]);
+ sonic_cda_put(dev, 0, SONIC_CD_CAP2, dev->dev_addr[5] << 8 | dev->dev_addr[4]);
+ sonic_set_cam_enable(dev, 1);
for (i = 0; i < 16; i++)
- lp->cda.cam_desc[i].cam_entry_pointer = i;
+ sonic_cda_put(dev, i, SONIC_CD_ENTRY_POINTER, i);
/*
* initialize CAM registers
@@ -588,8 +742,8 @@ static int sonic_init(struct net_device *dev)
break;
}
if (sonic_debug > 2) {
- printk("sonic_init: CMD=%x, ISR=%x\n",
- SONIC_READ(SONIC_CMD), SONIC_READ(SONIC_ISR));
+ printk("sonic_init: CMD=%x, ISR=%x\n, i=%d",
+ SONIC_READ(SONIC_CMD), SONIC_READ(SONIC_ISR), i);
}
/*
@@ -604,7 +758,7 @@ static int sonic_init(struct net_device *dev)
cmd = SONIC_READ(SONIC_CMD);
if ((cmd & SONIC_CR_RXEN) == 0 || (cmd & SONIC_CR_STP) == 0)
- printk("sonic_init: failed, status=%x\n", cmd);
+ printk(KERN_ERR "sonic_init: failed, status=%x\n", cmd);
if (sonic_debug > 2)
printk("sonic_init: new status=%x\n",
diff --git a/drivers/net/sonic.h b/drivers/net/sonic.h
index c4a6d58e4af..cede969a8ba 100644
--- a/drivers/net/sonic.h
+++ b/drivers/net/sonic.h
@@ -1,5 +1,5 @@
/*
- * Helpfile for sonic.c
+ * Header file for sonic.c
*
* (C) Waldorf Electronics, Germany
* Written by Andreas Busse
@@ -9,10 +9,16 @@
* and pad structure members must be exchanged. Also, the structures
* need to be changed accordingly to the bus size.
*
- * 981229 MSch: did just that for the 68k Mac port (32 bit, big endian),
- * see CONFIG_MACSONIC branch below.
+ * 981229 MSch: did just that for the 68k Mac port (32 bit, big endian)
*
+ * 990611 David Huggins-Daines <dhd@debian.org>: This machine abstraction
+ * does not cope with 16-bit bus sizes very well. Therefore I have
+ * rewritten it with ugly macros and evil inlines.
+ *
+ * 050625 Finn Thain: introduced more 32-bit cards and dhd's support
+ * for 16-bit cards (from the mac68k project).
*/
+
#ifndef SONIC_H
#define SONIC_H
@@ -83,6 +89,7 @@
/*
* Error counters
*/
+
#define SONIC_CRCT 0x2c
#define SONIC_FAET 0x2d
#define SONIC_MPT 0x2e
@@ -182,14 +189,14 @@
#define SONIC_INT_BR 0x4000
#define SONIC_INT_HBL 0x2000
-#define SONIC_INT_LCD 0x1000
-#define SONIC_INT_PINT 0x0800
-#define SONIC_INT_PKTRX 0x0400
-#define SONIC_INT_TXDN 0x0200
-#define SONIC_INT_TXER 0x0100
-#define SONIC_INT_TC 0x0080
-#define SONIC_INT_RDE 0x0040
-#define SONIC_INT_RBE 0x0020
+#define SONIC_INT_LCD 0x1000
+#define SONIC_INT_PINT 0x0800
+#define SONIC_INT_PKTRX 0x0400
+#define SONIC_INT_TXDN 0x0200
+#define SONIC_INT_TXER 0x0100
+#define SONIC_INT_TC 0x0080
+#define SONIC_INT_RDE 0x0040
+#define SONIC_INT_RBE 0x0020
#define SONIC_INT_RBAE 0x0010
#define SONIC_INT_CRC 0x0008
#define SONIC_INT_FAE 0x0004
@@ -201,224 +208,61 @@
* The interrupts we allow.
*/
-#define SONIC_IMR_DEFAULT (SONIC_INT_BR | \
- SONIC_INT_LCD | \
- SONIC_INT_PINT | \
+#define SONIC_IMR_DEFAULT ( SONIC_INT_BR | \
+ SONIC_INT_LCD | \
+ SONIC_INT_RFO | \
SONIC_INT_PKTRX | \
SONIC_INT_TXDN | \
SONIC_INT_TXER | \
SONIC_INT_RDE | \
- SONIC_INT_RBE | \
SONIC_INT_RBAE | \
SONIC_INT_CRC | \
SONIC_INT_FAE | \
SONIC_INT_MP)
-#define SONIC_END_OF_LINKS 0x0001
-
-
-#ifdef CONFIG_MACSONIC
-/*
- * Big endian like structures on 680x0 Macs
- */
-
-typedef struct {
- u32 rx_bufadr_l; /* receive buffer ptr */
- u32 rx_bufadr_h;
-
- u32 rx_bufsize_l; /* no. of words in the receive buffer */
- u32 rx_bufsize_h;
-} sonic_rr_t;
-
-/*
- * Sonic receive descriptor. Receive descriptors are
- * kept in a linked list of these structures.
- */
-
-typedef struct {
- SREGS_PAD(pad0);
- u16 rx_status; /* status after reception of a packet */
- SREGS_PAD(pad1);
- u16 rx_pktlen; /* length of the packet incl. CRC */
-
- /*
- * Pointers to the location in the receive buffer area (RBA)
- * where the packet resides. A packet is always received into
- * a contiguous piece of memory.
- */
- SREGS_PAD(pad2);
- u16 rx_pktptr_l;
- SREGS_PAD(pad3);
- u16 rx_pktptr_h;
-
- SREGS_PAD(pad4);
- u16 rx_seqno; /* sequence no. */
-
- SREGS_PAD(pad5);
- u16 link; /* link to next RDD (end if EOL bit set) */
-
- /*
- * Owner of this descriptor, 0= driver, 1=sonic
- */
-
- SREGS_PAD(pad6);
- u16 in_use;
-
- caddr_t rda_next; /* pointer to next RD */
-} sonic_rd_t;
-
-
-/*
- * Describes a Transmit Descriptor
- */
-typedef struct {
- SREGS_PAD(pad0);
- u16 tx_status; /* status after transmission of a packet */
- SREGS_PAD(pad1);
- u16 tx_config; /* transmit configuration for this packet */
- SREGS_PAD(pad2);
- u16 tx_pktsize; /* size of the packet to be transmitted */
- SREGS_PAD(pad3);
- u16 tx_frag_count; /* no. of fragments */
-
- SREGS_PAD(pad4);
- u16 tx_frag_ptr_l;
- SREGS_PAD(pad5);
- u16 tx_frag_ptr_h;
- SREGS_PAD(pad6);
- u16 tx_frag_size;
-
- SREGS_PAD(pad7);
- u16 link; /* ptr to next descriptor */
-} sonic_td_t;
-
-
-/*
- * Describes an entry in the CAM Descriptor Area.
- */
-
-typedef struct {
- SREGS_PAD(pad0);
- u16 cam_entry_pointer;
- SREGS_PAD(pad1);
- u16 cam_cap0;
- SREGS_PAD(pad2);
- u16 cam_cap1;
- SREGS_PAD(pad3);
- u16 cam_cap2;
-} sonic_cd_t;
-
+#define SONIC_EOL 0x0001
#define CAM_DESCRIPTORS 16
-
-typedef struct {
- sonic_cd_t cam_desc[CAM_DESCRIPTORS];
- SREGS_PAD(pad);
- u16 cam_enable;
-} sonic_cda_t;
-
-#else /* original declarations, little endian 32 bit */
-
-/*
- * structure definitions
- */
-
-typedef struct {
- u32 rx_bufadr_l; /* receive buffer ptr */
- u32 rx_bufadr_h;
-
- u32 rx_bufsize_l; /* no. of words in the receive buffer */
- u32 rx_bufsize_h;
-} sonic_rr_t;
-
-/*
- * Sonic receive descriptor. Receive descriptors are
- * kept in a linked list of these structures.
- */
-
-typedef struct {
- u16 rx_status; /* status after reception of a packet */
- SREGS_PAD(pad0);
- u16 rx_pktlen; /* length of the packet incl. CRC */
- SREGS_PAD(pad1);
-
- /*
- * Pointers to the location in the receive buffer area (RBA)
- * where the packet resides. A packet is always received into
- * a contiguous piece of memory.
- */
- u16 rx_pktptr_l;
- SREGS_PAD(pad2);
- u16 rx_pktptr_h;
- SREGS_PAD(pad3);
-
- u16 rx_seqno; /* sequence no. */
- SREGS_PAD(pad4);
-
- u16 link; /* link to next RDD (end if EOL bit set) */
- SREGS_PAD(pad5);
-
- /*
- * Owner of this descriptor, 0= driver, 1=sonic
- */
-
- u16 in_use;
- SREGS_PAD(pad6);
-
- caddr_t rda_next; /* pointer to next RD */
-} sonic_rd_t;
-
-
-/*
- * Describes a Transmit Descriptor
- */
-typedef struct {
- u16 tx_status; /* status after transmission of a packet */
- SREGS_PAD(pad0);
- u16 tx_config; /* transmit configuration for this packet */
- SREGS_PAD(pad1);
- u16 tx_pktsize; /* size of the packet to be transmitted */
- SREGS_PAD(pad2);
- u16 tx_frag_count; /* no. of fragments */
- SREGS_PAD(pad3);
-
- u16 tx_frag_ptr_l;
- SREGS_PAD(pad4);
- u16 tx_frag_ptr_h;
- SREGS_PAD(pad5);
- u16 tx_frag_size;
- SREGS_PAD(pad6);
-
- u16 link; /* ptr to next descriptor */
- SREGS_PAD(pad7);
-} sonic_td_t;
-
-
-/*
- * Describes an entry in the CAM Descriptor Area.
- */
-
-typedef struct {
- u16 cam_entry_pointer;
- SREGS_PAD(pad0);
- u16 cam_cap0;
- SREGS_PAD(pad1);
- u16 cam_cap1;
- SREGS_PAD(pad2);
- u16 cam_cap2;
- SREGS_PAD(pad3);
-} sonic_cd_t;
-
-#define CAM_DESCRIPTORS 16
-
-
-typedef struct {
- sonic_cd_t cam_desc[CAM_DESCRIPTORS];
- u16 cam_enable;
- SREGS_PAD(pad);
-} sonic_cda_t;
-#endif /* endianness */
+/* Offsets in the various DMA buffers accessed by the SONIC */
+
+#define SONIC_BITMODE16 0
+#define SONIC_BITMODE32 1
+#define SONIC_BUS_SCALE(bitmode) ((bitmode) ? 4 : 2)
+/* Note! These are all measured in bus-size units, so use SONIC_BUS_SCALE */
+#define SIZEOF_SONIC_RR 4
+#define SONIC_RR_BUFADR_L 0
+#define SONIC_RR_BUFADR_H 1
+#define SONIC_RR_BUFSIZE_L 2
+#define SONIC_RR_BUFSIZE_H 3
+
+#define SIZEOF_SONIC_RD 7
+#define SONIC_RD_STATUS 0
+#define SONIC_RD_PKTLEN 1
+#define SONIC_RD_PKTPTR_L 2
+#define SONIC_RD_PKTPTR_H 3
+#define SONIC_RD_SEQNO 4
+#define SONIC_RD_LINK 5
+#define SONIC_RD_IN_USE 6
+
+#define SIZEOF_SONIC_TD 8
+#define SONIC_TD_STATUS 0
+#define SONIC_TD_CONFIG 1
+#define SONIC_TD_PKTSIZE 2
+#define SONIC_TD_FRAG_COUNT 3
+#define SONIC_TD_FRAG_PTR_L 4
+#define SONIC_TD_FRAG_PTR_H 5
+#define SONIC_TD_FRAG_SIZE 6
+#define SONIC_TD_LINK 7
+
+#define SIZEOF_SONIC_CD 4
+#define SONIC_CD_ENTRY_POINTER 0
+#define SONIC_CD_CAP0 1
+#define SONIC_CD_CAP1 2
+#define SONIC_CD_CAP2 3
+
+#define SIZEOF_SONIC_CDA ((CAM_DESCRIPTORS * SIZEOF_SONIC_CD) + 1)
+#define SONIC_CDA_CAM_ENABLE (CAM_DESCRIPTORS * SIZEOF_SONIC_CD)
/*
* Some tunables for the buffer areas. Power of 2 is required
@@ -426,44 +270,60 @@ typedef struct {
*
* MSch: use more buffer space for the slow m68k Macs!
*/
-#ifdef CONFIG_MACSONIC
-#define SONIC_NUM_RRS 32 /* number of receive resources */
-#define SONIC_NUM_RDS SONIC_NUM_RRS /* number of receive descriptors */
-#define SONIC_NUM_TDS 32 /* number of transmit descriptors */
-#else
-#define SONIC_NUM_RRS 16 /* number of receive resources */
-#define SONIC_NUM_RDS SONIC_NUM_RRS /* number of receive descriptors */
-#define SONIC_NUM_TDS 16 /* number of transmit descriptors */
-#endif
-#define SONIC_RBSIZE 1520 /* size of one resource buffer */
+#define SONIC_NUM_RRS 16 /* number of receive resources */
+#define SONIC_NUM_RDS SONIC_NUM_RRS /* number of receive descriptors */
+#define SONIC_NUM_TDS 16 /* number of transmit descriptors */
-#define SONIC_RDS_MASK (SONIC_NUM_RDS-1)
-#define SONIC_TDS_MASK (SONIC_NUM_TDS-1)
+#define SONIC_RDS_MASK (SONIC_NUM_RDS-1)
+#define SONIC_TDS_MASK (SONIC_NUM_TDS-1)
+#define SONIC_RBSIZE 1520 /* size of one resource buffer */
+
+/* Again, measured in bus size units! */
+#define SIZEOF_SONIC_DESC (SIZEOF_SONIC_CDA \
+ + (SIZEOF_SONIC_TD * SONIC_NUM_TDS) \
+ + (SIZEOF_SONIC_RD * SONIC_NUM_RDS) \
+ + (SIZEOF_SONIC_RR * SONIC_NUM_RRS))
/* Information that need to be kept for each board. */
struct sonic_local {
- sonic_cda_t cda; /* virtual CPU address of CDA */
- sonic_td_t tda[SONIC_NUM_TDS]; /* transmit descriptor area */
- sonic_rr_t rra[SONIC_NUM_RRS]; /* receive resource area */
- sonic_rd_t rda[SONIC_NUM_RDS]; /* receive descriptor area */
- struct sk_buff *tx_skb[SONIC_NUM_TDS]; /* skbuffs for packets to transmit */
- unsigned int tx_laddr[SONIC_NUM_TDS]; /* logical DMA address fro skbuffs */
- unsigned char *rba; /* start of receive buffer areas */
- unsigned int cda_laddr; /* logical DMA address of CDA */
- unsigned int tda_laddr; /* logical DMA address of TDA */
- unsigned int rra_laddr; /* logical DMA address of RRA */
- unsigned int rda_laddr; /* logical DMA address of RDA */
- unsigned int rba_laddr; /* logical DMA address of RBA */
- unsigned int cur_rra; /* current indexes to resource areas */
+ /* Bus size. 0 == 16 bits, 1 == 32 bits. */
+ int dma_bitmode;
+ /* Register offset within the longword (independent of endianness,
+ and varies from one type of Macintosh SONIC to another
+ (Aarrgh)) */
+ int reg_offset;
+ void *descriptors;
+ /* Crud. These areas have to be within the same 64K. Therefore
+ we allocate a desriptors page, and point these to places within it. */
+ void *cda; /* CAM descriptor area */
+ void *tda; /* Transmit descriptor area */
+ void *rra; /* Receive resource area */
+ void *rda; /* Receive descriptor area */
+ struct sk_buff* volatile rx_skb[SONIC_NUM_RRS]; /* packets to be received */
+ struct sk_buff* volatile tx_skb[SONIC_NUM_TDS]; /* packets to be transmitted */
+ unsigned int tx_len[SONIC_NUM_TDS]; /* lengths of tx DMA mappings */
+ /* Logical DMA addresses on MIPS, bus addresses on m68k
+ * (so "laddr" is a bit misleading) */
+ dma_addr_t descriptors_laddr;
+ u32 cda_laddr; /* logical DMA address of CDA */
+ u32 tda_laddr; /* logical DMA address of TDA */
+ u32 rra_laddr; /* logical DMA address of RRA */
+ u32 rda_laddr; /* logical DMA address of RDA */
+ dma_addr_t rx_laddr[SONIC_NUM_RRS]; /* logical DMA addresses of rx skbuffs */
+ dma_addr_t tx_laddr[SONIC_NUM_TDS]; /* logical DMA addresses of tx skbuffs */
+ unsigned int rra_end;
+ unsigned int cur_rwp;
unsigned int cur_rx;
- unsigned int cur_tx;
- unsigned int dirty_tx; /* last unacked transmit packet */
- char tx_full;
+ unsigned int cur_tx; /* first unacked transmit packet */
+ unsigned int eol_rx;
+ unsigned int eol_tx; /* last unacked transmit packet */
+ unsigned int next_tx; /* next free TD */
+ struct device *device; /* generic device */
struct net_device_stats stats;
};
-#define TX_TIMEOUT 6
+#define TX_TIMEOUT (3 * HZ)
/* Index to functions, as function prototypes. */
@@ -477,6 +337,114 @@ static void sonic_multicast_list(struct net_device *dev);
static int sonic_init(struct net_device *dev);
static void sonic_tx_timeout(struct net_device *dev);
+/* Internal inlines for reading/writing DMA buffers. Note that bus
+ size and endianness matter here, whereas they don't for registers,
+ as far as we can tell. */
+/* OpenBSD calls this "SWO". I'd like to think that sonic_buf_put()
+ is a much better name. */
+static inline void sonic_buf_put(void* base, int bitmode,
+ int offset, __u16 val)
+{
+ if (bitmode)
+#ifdef __BIG_ENDIAN
+ ((__u16 *) base + (offset*2))[1] = val;
+#else
+ ((__u16 *) base + (offset*2))[0] = val;
+#endif
+ else
+ ((__u16 *) base)[offset] = val;
+}
+
+static inline __u16 sonic_buf_get(void* base, int bitmode,
+ int offset)
+{
+ if (bitmode)
+#ifdef __BIG_ENDIAN
+ return ((volatile __u16 *) base + (offset*2))[1];
+#else
+ return ((volatile __u16 *) base + (offset*2))[0];
+#endif
+ else
+ return ((volatile __u16 *) base)[offset];
+}
+
+/* Inlines that you should actually use for reading/writing DMA buffers */
+static inline void sonic_cda_put(struct net_device* dev, int entry,
+ int offset, __u16 val)
+{
+ struct sonic_local* lp = (struct sonic_local *) dev->priv;
+ sonic_buf_put(lp->cda, lp->dma_bitmode,
+ (entry * SIZEOF_SONIC_CD) + offset, val);
+}
+
+static inline __u16 sonic_cda_get(struct net_device* dev, int entry,
+ int offset)
+{
+ struct sonic_local* lp = (struct sonic_local *) dev->priv;
+ return sonic_buf_get(lp->cda, lp->dma_bitmode,
+ (entry * SIZEOF_SONIC_CD) + offset);
+}
+
+static inline void sonic_set_cam_enable(struct net_device* dev, __u16 val)
+{
+ struct sonic_local* lp = (struct sonic_local *) dev->priv;
+ sonic_buf_put(lp->cda, lp->dma_bitmode, SONIC_CDA_CAM_ENABLE, val);
+}
+
+static inline __u16 sonic_get_cam_enable(struct net_device* dev)
+{
+ struct sonic_local* lp = (struct sonic_local *) dev->priv;
+ return sonic_buf_get(lp->cda, lp->dma_bitmode, SONIC_CDA_CAM_ENABLE);
+}
+
+static inline void sonic_tda_put(struct net_device* dev, int entry,
+ int offset, __u16 val)
+{
+ struct sonic_local* lp = (struct sonic_local *) dev->priv;
+ sonic_buf_put(lp->tda, lp->dma_bitmode,
+ (entry * SIZEOF_SONIC_TD) + offset, val);
+}
+
+static inline __u16 sonic_tda_get(struct net_device* dev, int entry,
+ int offset)
+{
+ struct sonic_local* lp = (struct sonic_local *) dev->priv;
+ return sonic_buf_get(lp->tda, lp->dma_bitmode,
+ (entry * SIZEOF_SONIC_TD) + offset);
+}
+
+static inline void sonic_rda_put(struct net_device* dev, int entry,
+ int offset, __u16 val)
+{
+ struct sonic_local* lp = (struct sonic_local *) dev->priv;
+ sonic_buf_put(lp->rda, lp->dma_bitmode,
+ (entry * SIZEOF_SONIC_RD) + offset, val);
+}
+
+static inline __u16 sonic_rda_get(struct net_device* dev, int entry,
+ int offset)
+{
+ struct sonic_local* lp = (struct sonic_local *) dev->priv;
+ return sonic_buf_get(lp->rda, lp->dma_bitmode,
+ (entry * SIZEOF_SONIC_RD) + offset);
+}
+
+static inline void sonic_rra_put(struct net_device* dev, int entry,
+ int offset, __u16 val)
+{
+ struct sonic_local* lp = (struct sonic_local *) dev->priv;
+ sonic_buf_put(lp->rra, lp->dma_bitmode,
+ (entry * SIZEOF_SONIC_RR) + offset, val);
+}
+
+static inline __u16 sonic_rra_get(struct net_device* dev, int entry,
+ int offset)
+{
+ struct sonic_local* lp = (struct sonic_local *) dev->priv;
+ return sonic_buf_get(lp->rra, lp->dma_bitmode,
+ (entry * SIZEOF_SONIC_RR) + offset);
+}
+
static const char *version =
"sonic.c:v0.92 20.9.98 tsbogend@alpha.franken.de\n";
diff --git a/drivers/net/tg3.c b/drivers/net/tg3.c
index 01419aff333..af8263a1580 100644
--- a/drivers/net/tg3.c
+++ b/drivers/net/tg3.c
@@ -66,8 +66,8 @@
#define DRV_MODULE_NAME "tg3"
#define PFX DRV_MODULE_NAME ": "
-#define DRV_MODULE_VERSION "3.36"
-#define DRV_MODULE_RELDATE "August 19, 2005"
+#define DRV_MODULE_VERSION "3.37"
+#define DRV_MODULE_RELDATE "August 25, 2005"
#define TG3_DEF_MAC_MODE 0
#define TG3_DEF_RX_MODE 0
@@ -340,41 +340,92 @@ static struct {
static void tg3_write_indirect_reg32(struct tg3 *tp, u32 off, u32 val)
{
- if ((tp->tg3_flags & TG3_FLAG_PCIX_TARGET_HWBUG) != 0) {
- spin_lock_bh(&tp->indirect_lock);
- pci_write_config_dword(tp->pdev, TG3PCI_REG_BASE_ADDR, off);
- pci_write_config_dword(tp->pdev, TG3PCI_REG_DATA, val);
- spin_unlock_bh(&tp->indirect_lock);
- } else {
- writel(val, tp->regs + off);
- if ((tp->tg3_flags & TG3_FLAG_5701_REG_WRITE_BUG) != 0)
- readl(tp->regs + off);
+ unsigned long flags;
+
+ spin_lock_irqsave(&tp->indirect_lock, flags);
+ pci_write_config_dword(tp->pdev, TG3PCI_REG_BASE_ADDR, off);
+ pci_write_config_dword(tp->pdev, TG3PCI_REG_DATA, val);
+ spin_unlock_irqrestore(&tp->indirect_lock, flags);
+}
+
+static void tg3_write_flush_reg32(struct tg3 *tp, u32 off, u32 val)
+{
+ writel(val, tp->regs + off);
+ readl(tp->regs + off);
+}
+
+static u32 tg3_read_indirect_reg32(struct tg3 *tp, u32 off)
+{
+ unsigned long flags;
+ u32 val;
+
+ spin_lock_irqsave(&tp->indirect_lock, flags);
+ pci_write_config_dword(tp->pdev, TG3PCI_REG_BASE_ADDR, off);
+ pci_read_config_dword(tp->pdev, TG3PCI_REG_DATA, &val);
+ spin_unlock_irqrestore(&tp->indirect_lock, flags);
+ return val;
+}
+
+static void tg3_write_indirect_mbox(struct tg3 *tp, u32 off, u32 val)
+{
+ unsigned long flags;
+
+ if (off == (MAILBOX_RCVRET_CON_IDX_0 + TG3_64BIT_REG_LOW)) {
+ pci_write_config_dword(tp->pdev, TG3PCI_RCV_RET_RING_CON_IDX +
+ TG3_64BIT_REG_LOW, val);
+ return;
+ }
+ if (off == (MAILBOX_RCV_STD_PROD_IDX + TG3_64BIT_REG_LOW)) {
+ pci_write_config_dword(tp->pdev, TG3PCI_STD_RING_PROD_IDX +
+ TG3_64BIT_REG_LOW, val);
+ return;
+ }
+
+ spin_lock_irqsave(&tp->indirect_lock, flags);
+ pci_write_config_dword(tp->pdev, TG3PCI_REG_BASE_ADDR, off + 0x5600);
+ pci_write_config_dword(tp->pdev, TG3PCI_REG_DATA, val);
+ spin_unlock_irqrestore(&tp->indirect_lock, flags);
+
+ /* In indirect mode when disabling interrupts, we also need
+ * to clear the interrupt bit in the GRC local ctrl register.
+ */
+ if ((off == (MAILBOX_INTERRUPT_0 + TG3_64BIT_REG_LOW)) &&
+ (val == 0x1)) {
+ pci_write_config_dword(tp->pdev, TG3PCI_MISC_LOCAL_CTRL,
+ tp->grc_local_ctrl|GRC_LCLCTRL_CLEARINT);
}
}
+static u32 tg3_read_indirect_mbox(struct tg3 *tp, u32 off)
+{
+ unsigned long flags;
+ u32 val;
+
+ spin_lock_irqsave(&tp->indirect_lock, flags);
+ pci_write_config_dword(tp->pdev, TG3PCI_REG_BASE_ADDR, off + 0x5600);
+ pci_read_config_dword(tp->pdev, TG3PCI_REG_DATA, &val);
+ spin_unlock_irqrestore(&tp->indirect_lock, flags);
+ return val;
+}
+
static void _tw32_flush(struct tg3 *tp, u32 off, u32 val)
{
- if ((tp->tg3_flags & TG3_FLAG_PCIX_TARGET_HWBUG) != 0) {
- spin_lock_bh(&tp->indirect_lock);
- pci_write_config_dword(tp->pdev, TG3PCI_REG_BASE_ADDR, off);
- pci_write_config_dword(tp->pdev, TG3PCI_REG_DATA, val);
- spin_unlock_bh(&tp->indirect_lock);
- } else {
- void __iomem *dest = tp->regs + off;
- writel(val, dest);
- readl(dest); /* always flush PCI write */
- }
+ tp->write32(tp, off, val);
+ if (!(tp->tg3_flags & TG3_FLAG_PCIX_TARGET_HWBUG) &&
+ !(tp->tg3_flags & TG3_FLAG_5701_REG_WRITE_BUG) &&
+ !(tp->tg3_flags2 & TG3_FLG2_ICH_WORKAROUND))
+ tp->read32(tp, off); /* flush */
}
-static inline void _tw32_rx_mbox(struct tg3 *tp, u32 off, u32 val)
+static inline void tw32_mailbox_flush(struct tg3 *tp, u32 off, u32 val)
{
- void __iomem *mbox = tp->regs + off;
- writel(val, mbox);
- if (tp->tg3_flags & TG3_FLAG_MBOX_WRITE_REORDER)
- readl(mbox);
+ tp->write32_mbox(tp, off, val);
+ if (!(tp->tg3_flags & TG3_FLAG_MBOX_WRITE_REORDER) &&
+ !(tp->tg3_flags2 & TG3_FLG2_ICH_WORKAROUND))
+ tp->read32_mbox(tp, off);
}
-static inline void _tw32_tx_mbox(struct tg3 *tp, u32 off, u32 val)
+static void tg3_write32_tx_mbox(struct tg3 *tp, u32 off, u32 val)
{
void __iomem *mbox = tp->regs + off;
writel(val, mbox);
@@ -384,46 +435,57 @@ static inline void _tw32_tx_mbox(struct tg3 *tp, u32 off, u32 val)
readl(mbox);
}
-#define tw32_mailbox(reg, val) writel(((val) & 0xffffffff), tp->regs + (reg))
-#define tw32_rx_mbox(reg, val) _tw32_rx_mbox(tp, reg, val)
-#define tw32_tx_mbox(reg, val) _tw32_tx_mbox(tp, reg, val)
+static void tg3_write32(struct tg3 *tp, u32 off, u32 val)
+{
+ writel(val, tp->regs + off);
+}
+
+static u32 tg3_read32(struct tg3 *tp, u32 off)
+{
+ return (readl(tp->regs + off));
+}
+
+#define tw32_mailbox(reg, val) tp->write32_mbox(tp, reg, val)
+#define tw32_mailbox_f(reg, val) tw32_mailbox_flush(tp, (reg), (val))
+#define tw32_rx_mbox(reg, val) tp->write32_rx_mbox(tp, reg, val)
+#define tw32_tx_mbox(reg, val) tp->write32_tx_mbox(tp, reg, val)
+#define tr32_mailbox(reg) tp->read32_mbox(tp, reg)
-#define tw32(reg,val) tg3_write_indirect_reg32(tp,(reg),(val))
+#define tw32(reg,val) tp->write32(tp, reg, val)
#define tw32_f(reg,val) _tw32_flush(tp,(reg),(val))
-#define tw16(reg,val) writew(((val) & 0xffff), tp->regs + (reg))
-#define tw8(reg,val) writeb(((val) & 0xff), tp->regs + (reg))
-#define tr32(reg) readl(tp->regs + (reg))
-#define tr16(reg) readw(tp->regs + (reg))
-#define tr8(reg) readb(tp->regs + (reg))
+#define tr32(reg) tp->read32(tp, reg)
static void tg3_write_mem(struct tg3 *tp, u32 off, u32 val)
{
- spin_lock_bh(&tp->indirect_lock);
+ unsigned long flags;
+
+ spin_lock_irqsave(&tp->indirect_lock, flags);
pci_write_config_dword(tp->pdev, TG3PCI_MEM_WIN_BASE_ADDR, off);
pci_write_config_dword(tp->pdev, TG3PCI_MEM_WIN_DATA, val);
/* Always leave this as zero. */
pci_write_config_dword(tp->pdev, TG3PCI_MEM_WIN_BASE_ADDR, 0);
- spin_unlock_bh(&tp->indirect_lock);
+ spin_unlock_irqrestore(&tp->indirect_lock, flags);
}
static void tg3_read_mem(struct tg3 *tp, u32 off, u32 *val)
{
- spin_lock_bh(&tp->indirect_lock);
+ unsigned long flags;
+
+ spin_lock_irqsave(&tp->indirect_lock, flags);
pci_write_config_dword(tp->pdev, TG3PCI_MEM_WIN_BASE_ADDR, off);
pci_read_config_dword(tp->pdev, TG3PCI_MEM_WIN_DATA, val);
/* Always leave this as zero. */
pci_write_config_dword(tp->pdev, TG3PCI_MEM_WIN_BASE_ADDR, 0);
- spin_unlock_bh(&tp->indirect_lock);
+ spin_unlock_irqrestore(&tp->indirect_lock, flags);
}
static void tg3_disable_ints(struct tg3 *tp)
{
tw32(TG3PCI_MISC_HOST_CTRL,
(tp->misc_host_ctrl | MISC_HOST_CTRL_MASK_PCI_INT));
- tw32_mailbox(MAILBOX_INTERRUPT_0 + TG3_64BIT_REG_LOW, 0x00000001);
- tr32(MAILBOX_INTERRUPT_0 + TG3_64BIT_REG_LOW);
+ tw32_mailbox_f(MAILBOX_INTERRUPT_0 + TG3_64BIT_REG_LOW, 0x00000001);
}
static inline void tg3_cond_int(struct tg3 *tp)
@@ -439,9 +501,8 @@ static void tg3_enable_ints(struct tg3 *tp)
tw32(TG3PCI_MISC_HOST_CTRL,
(tp->misc_host_ctrl & ~MISC_HOST_CTRL_MASK_PCI_INT));
- tw32_mailbox(MAILBOX_INTERRUPT_0 + TG3_64BIT_REG_LOW,
- (tp->last_tag << 24));
- tr32(MAILBOX_INTERRUPT_0 + TG3_64BIT_REG_LOW);
+ tw32_mailbox_f(MAILBOX_INTERRUPT_0 + TG3_64BIT_REG_LOW,
+ (tp->last_tag << 24));
tg3_cond_int(tp);
}
@@ -472,8 +533,6 @@ static inline unsigned int tg3_has_work(struct tg3 *tp)
*/
static void tg3_restart_ints(struct tg3 *tp)
{
- tw32(TG3PCI_MISC_HOST_CTRL,
- (tp->misc_host_ctrl & ~MISC_HOST_CTRL_MASK_PCI_INT));
tw32_mailbox(MAILBOX_INTERRUPT_0 + TG3_64BIT_REG_LOW,
tp->last_tag << 24);
mmiowb();
@@ -3278,9 +3337,8 @@ static irqreturn_t tg3_interrupt(int irq, void *dev_id, struct pt_regs *regs)
/* No work, shared interrupt perhaps? re-enable
* interrupts, and flush that PCI write
*/
- tw32_mailbox(MAILBOX_INTERRUPT_0 + TG3_64BIT_REG_LOW,
+ tw32_mailbox_f(MAILBOX_INTERRUPT_0 + TG3_64BIT_REG_LOW,
0x00000000);
- tr32(MAILBOX_INTERRUPT_0 + TG3_64BIT_REG_LOW);
}
} else { /* shared interrupt */
handled = 0;
@@ -3323,9 +3381,8 @@ static irqreturn_t tg3_interrupt_tagged(int irq, void *dev_id, struct pt_regs *r
/* no work, shared interrupt perhaps? re-enable
* interrupts, and flush that PCI write
*/
- tw32_mailbox(MAILBOX_INTERRUPT_0 + TG3_64BIT_REG_LOW,
- tp->last_tag << 24);
- tr32(MAILBOX_INTERRUPT_0 + TG3_64BIT_REG_LOW);
+ tw32_mailbox_f(MAILBOX_INTERRUPT_0 + TG3_64BIT_REG_LOW,
+ tp->last_tag << 24);
}
} else { /* shared interrupt */
handled = 0;
@@ -4216,7 +4273,7 @@ static void tg3_stop_fw(struct tg3 *);
static int tg3_chip_reset(struct tg3 *tp)
{
u32 val;
- u32 flags_save;
+ void (*write_op)(struct tg3 *, u32, u32);
int i;
if (!(tp->tg3_flags2 & TG3_FLG2_SUN_570X))
@@ -4228,8 +4285,9 @@ static int tg3_chip_reset(struct tg3 *tp)
* fun things. So, temporarily disable the 5701
* hardware workaround, while we do the reset.
*/
- flags_save = tp->tg3_flags;
- tp->tg3_flags &= ~TG3_FLAG_5701_REG_WRITE_BUG;
+ write_op = tp->write32;
+ if (write_op == tg3_write_flush_reg32)
+ tp->write32 = tg3_write32;
/* do the reset */
val = GRC_MISC_CFG_CORECLK_RESET;
@@ -4248,8 +4306,8 @@ static int tg3_chip_reset(struct tg3 *tp)
val |= GRC_MISC_CFG_KEEP_GPHY_POWER;
tw32(GRC_MISC_CFG, val);
- /* restore 5701 hardware bug workaround flag */
- tp->tg3_flags = flags_save;
+ /* restore 5701 hardware bug workaround write method */
+ tp->write32 = write_op;
/* Unfortunately, we have to delay before the PCI read back.
* Some 575X chips even will not respond to a PCI cfg access
@@ -4635,7 +4693,6 @@ static int tg3_load_firmware_cpu(struct tg3 *tp, u32 cpu_base, u32 cpu_scratch_b
int cpu_scratch_size, struct fw_info *info)
{
int err, i;
- u32 orig_tg3_flags = tp->tg3_flags;
void (*write_op)(struct tg3 *, u32, u32);
if (cpu_base == TX_CPU_BASE &&
@@ -4651,11 +4708,6 @@ static int tg3_load_firmware_cpu(struct tg3 *tp, u32 cpu_base, u32 cpu_scratch_b
else
write_op = tg3_write_indirect_reg32;
- /* Force use of PCI config space for indirect register
- * write calls.
- */
- tp->tg3_flags |= TG3_FLAG_PCIX_TARGET_HWBUG;
-
/* It is possible that bootcode is still loading at this point.
* Get the nvram lock first before halting the cpu.
*/
@@ -4691,7 +4743,6 @@ static int tg3_load_firmware_cpu(struct tg3 *tp, u32 cpu_base, u32 cpu_scratch_b
err = 0;
out:
- tp->tg3_flags = orig_tg3_flags;
return err;
}
@@ -5808,8 +5859,7 @@ static int tg3_reset_hw(struct tg3 *tp)
tw32_f(GRC_LOCAL_CTRL, tp->grc_local_ctrl);
udelay(100);
- tw32_mailbox(MAILBOX_INTERRUPT_0 + TG3_64BIT_REG_LOW, 0);
- tr32(MAILBOX_INTERRUPT_0 + TG3_64BIT_REG_LOW);
+ tw32_mailbox_f(MAILBOX_INTERRUPT_0 + TG3_64BIT_REG_LOW, 0);
tp->last_tag = 0;
if (!(tp->tg3_flags2 & TG3_FLG2_5705_PLUS)) {
@@ -6198,7 +6248,8 @@ static int tg3_test_interrupt(struct tg3 *tp)
HOSTCC_MODE_NOW);
for (i = 0; i < 5; i++) {
- int_mbox = tr32(MAILBOX_INTERRUPT_0 + TG3_64BIT_REG_LOW);
+ int_mbox = tr32_mailbox(MAILBOX_INTERRUPT_0 +
+ TG3_64BIT_REG_LOW);
if (int_mbox != 0)
break;
msleep(10);
@@ -6598,10 +6649,10 @@ static int tg3_open(struct net_device *dev)
/* Mailboxes */
printk("DEBUG: SNDHOST_PROD[%08x%08x] SNDNIC_PROD[%08x%08x]\n",
- tr32(MAILBOX_SNDHOST_PROD_IDX_0 + 0x0),
- tr32(MAILBOX_SNDHOST_PROD_IDX_0 + 0x4),
- tr32(MAILBOX_SNDNIC_PROD_IDX_0 + 0x0),
- tr32(MAILBOX_SNDNIC_PROD_IDX_0 + 0x4));
+ tr32_mailbox(MAILBOX_SNDHOST_PROD_IDX_0 + 0x0),
+ tr32_mailbox(MAILBOX_SNDHOST_PROD_IDX_0 + 0x4),
+ tr32_mailbox(MAILBOX_SNDNIC_PROD_IDX_0 + 0x0),
+ tr32_mailbox(MAILBOX_SNDNIC_PROD_IDX_0 + 0x4));
/* NIC side send descriptors. */
for (i = 0; i < 6; i++) {
@@ -7865,8 +7916,6 @@ static int tg3_test_loopback(struct tg3 *tp)
err = -EIO;
- tg3_abort_hw(tp, 1);
-
tg3_reset_hw(tp);
mac_mode = (tp->mac_mode & ~MAC_MODE_PORT_MODE_MASK) |
@@ -7903,7 +7952,7 @@ static int tg3_test_loopback(struct tg3 *tp)
num_pkts++;
tw32_tx_mbox(MAILBOX_SNDHOST_PROD_IDX_0 + TG3_64BIT_REG_LOW, send_idx);
- tr32(MAILBOX_SNDHOST_PROD_IDX_0 + TG3_64BIT_REG_LOW);
+ tr32_mailbox(MAILBOX_SNDHOST_PROD_IDX_0 + TG3_64BIT_REG_LOW);
udelay(10);
@@ -9155,14 +9204,6 @@ static int __devinit tg3_is_sun_570X(struct tg3 *tp)
static int __devinit tg3_get_invariants(struct tg3 *tp)
{
static struct pci_device_id write_reorder_chipsets[] = {
- { PCI_DEVICE(PCI_VENDOR_ID_INTEL,
- PCI_DEVICE_ID_INTEL_82801AA_8) },
- { PCI_DEVICE(PCI_VENDOR_ID_INTEL,
- PCI_DEVICE_ID_INTEL_82801AB_8) },
- { PCI_DEVICE(PCI_VENDOR_ID_INTEL,
- PCI_DEVICE_ID_INTEL_82801BA_11) },
- { PCI_DEVICE(PCI_VENDOR_ID_INTEL,
- PCI_DEVICE_ID_INTEL_82801BA_6) },
{ PCI_DEVICE(PCI_VENDOR_ID_AMD,
PCI_DEVICE_ID_AMD_FE_GATE_700C) },
{ },
@@ -9179,7 +9220,7 @@ static int __devinit tg3_get_invariants(struct tg3 *tp)
tp->tg3_flags2 |= TG3_FLG2_SUN_570X;
#endif
- /* If we have an AMD 762 or Intel ICH/ICH0/ICH2 chipset, write
+ /* If we have an AMD 762 chipset, write
* reordering to the mailbox registers done by the host
* controller can cause major troubles. We read back from
* every mailbox register write to force the writes to be
@@ -9217,6 +9258,69 @@ static int __devinit tg3_get_invariants(struct tg3 *tp)
if (tp->pci_chip_rev_id == CHIPREV_ID_5752_A0_HW)
tp->pci_chip_rev_id = CHIPREV_ID_5752_A0;
+ /* If we have 5702/03 A1 or A2 on certain ICH chipsets,
+ * we need to disable memory and use config. cycles
+ * only to access all registers. The 5702/03 chips
+ * can mistakenly decode the special cycles from the
+ * ICH chipsets as memory write cycles, causing corruption
+ * of register and memory space. Only certain ICH bridges
+ * will drive special cycles with non-zero data during the
+ * address phase which can fall within the 5703's address
+ * range. This is not an ICH bug as the PCI spec allows
+ * non-zero address during special cycles. However, only
+ * these ICH bridges are known to drive non-zero addresses
+ * during special cycles.
+ *
+ * Since special cycles do not cross PCI bridges, we only
+ * enable this workaround if the 5703 is on the secondary
+ * bus of these ICH bridges.
+ */
+ if ((tp->pci_chip_rev_id == CHIPREV_ID_5703_A1) ||
+ (tp->pci_chip_rev_id == CHIPREV_ID_5703_A2)) {
+ static struct tg3_dev_id {
+ u32 vendor;
+ u32 device;
+ u32 rev;
+ } ich_chipsets[] = {
+ { PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82801AA_8,
+ PCI_ANY_ID },
+ { PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82801AB_8,
+ PCI_ANY_ID },
+ { PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82801BA_11,
+ 0xa },
+ { PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82801BA_6,
+ PCI_ANY_ID },
+ { },
+ };
+ struct tg3_dev_id *pci_id = &ich_chipsets[0];
+ struct pci_dev *bridge = NULL;
+
+ while (pci_id->vendor != 0) {
+ bridge = pci_get_device(pci_id->vendor, pci_id->device,
+ bridge);
+ if (!bridge) {
+ pci_id++;
+ continue;
+ }
+ if (pci_id->rev != PCI_ANY_ID) {
+ u8 rev;
+
+ pci_read_config_byte(bridge, PCI_REVISION_ID,
+ &rev);
+ if (rev > pci_id->rev)
+ continue;
+ }
+ if (bridge->subordinate &&
+ (bridge->subordinate->number ==
+ tp->pdev->bus->number)) {
+
+ tp->tg3_flags2 |= TG3_FLG2_ICH_WORKAROUND;
+ pci_dev_put(bridge);
+ break;
+ }
+ }
+ }
+
/* Find msi capability. */
if (GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5780)
tp->msi_cap = pci_find_capability(tp->pdev, PCI_CAP_ID_MSI);
@@ -9304,6 +9408,12 @@ static int __devinit tg3_get_invariants(struct tg3 *tp)
}
}
+ /* 5700 BX chips need to have their TX producer index mailboxes
+ * written twice to workaround a bug.
+ */
+ if (GET_CHIP_REV(tp->pci_chip_rev_id) == CHIPREV_5700_BX)
+ tp->tg3_flags |= TG3_FLAG_TXD_MBOX_HWBUG;
+
/* Back to back register writes can cause problems on this chip,
* the workaround is to read back all reg writes except those to
* mailbox regs. See tg3_write_indirect_reg32().
@@ -9327,6 +9437,43 @@ static int __devinit tg3_get_invariants(struct tg3 *tp)
pci_write_config_dword(tp->pdev, TG3PCI_PCISTATE, pci_state_reg);
}
+ /* Default fast path register access methods */
+ tp->read32 = tg3_read32;
+ tp->write32 = tg3_write32;
+ tp->read32_mbox = tg3_read32;
+ tp->write32_mbox = tg3_write32;
+ tp->write32_tx_mbox = tg3_write32;
+ tp->write32_rx_mbox = tg3_write32;
+
+ /* Various workaround register access methods */
+ if (tp->tg3_flags & TG3_FLAG_PCIX_TARGET_HWBUG)
+ tp->write32 = tg3_write_indirect_reg32;
+ else if (tp->tg3_flags & TG3_FLAG_5701_REG_WRITE_BUG)
+ tp->write32 = tg3_write_flush_reg32;
+
+ if ((tp->tg3_flags & TG3_FLAG_TXD_MBOX_HWBUG) ||
+ (tp->tg3_flags & TG3_FLAG_MBOX_WRITE_REORDER)) {
+ tp->write32_tx_mbox = tg3_write32_tx_mbox;
+ if (tp->tg3_flags & TG3_FLAG_MBOX_WRITE_REORDER)
+ tp->write32_rx_mbox = tg3_write_flush_reg32;
+ }
+
+ if (tp->tg3_flags2 & TG3_FLG2_ICH_WORKAROUND) {
+ tp->read32 = tg3_read_indirect_reg32;
+ tp->write32 = tg3_write_indirect_reg32;
+ tp->read32_mbox = tg3_read_indirect_mbox;
+ tp->write32_mbox = tg3_write_indirect_mbox;
+ tp->write32_tx_mbox = tg3_write_indirect_mbox;
+ tp->write32_rx_mbox = tg3_write_indirect_mbox;
+
+ iounmap(tp->regs);
+ tp->regs = 0;
+
+ pci_read_config_word(tp->pdev, PCI_COMMAND, &pci_cmd);
+ pci_cmd &= ~PCI_COMMAND_MEMORY;
+ pci_write_config_word(tp->pdev, PCI_COMMAND, pci_cmd);
+ }
+
/* Get eeprom hw config before calling tg3_set_power_state().
* In particular, the TG3_FLAG_EEPROM_WRITE_PROT flag must be
* determined before calling tg3_set_power_state() so that
@@ -9541,14 +9688,6 @@ static int __devinit tg3_get_invariants(struct tg3 *tp)
else
tp->tg3_flags &= ~TG3_FLAG_POLL_SERDES;
- /* 5700 BX chips need to have their TX producer index mailboxes
- * written twice to workaround a bug.
- */
- if (GET_CHIP_REV(tp->pci_chip_rev_id) == CHIPREV_5700_BX)
- tp->tg3_flags |= TG3_FLAG_TXD_MBOX_HWBUG;
- else
- tp->tg3_flags &= ~TG3_FLAG_TXD_MBOX_HWBUG;
-
/* It seems all chips can get confused if TX buffers
* straddle the 4GB address boundary in some cases.
*/
@@ -10471,7 +10610,10 @@ static int __devinit tg3_init_one(struct pci_dev *pdev,
return 0;
err_out_iounmap:
- iounmap(tp->regs);
+ if (tp->regs) {
+ iounmap(tp->regs);
+ tp->regs = 0;
+ }
err_out_free_dev:
free_netdev(dev);
@@ -10493,7 +10635,10 @@ static void __devexit tg3_remove_one(struct pci_dev *pdev)
struct tg3 *tp = netdev_priv(dev);
unregister_netdev(dev);
- iounmap(tp->regs);
+ if (tp->regs) {
+ iounmap(tp->regs);
+ tp->regs = 0;
+ }
free_netdev(dev);
pci_release_regions(pdev);
pci_disable_device(pdev);
diff --git a/drivers/net/tg3.h b/drivers/net/tg3.h
index 5c4433c147f..c184b773e58 100644
--- a/drivers/net/tg3.h
+++ b/drivers/net/tg3.h
@@ -2049,6 +2049,11 @@ struct tg3 {
spinlock_t lock;
spinlock_t indirect_lock;
+ u32 (*read32) (struct tg3 *, u32);
+ void (*write32) (struct tg3 *, u32, u32);
+ u32 (*read32_mbox) (struct tg3 *, u32);
+ void (*write32_mbox) (struct tg3 *, u32,
+ u32);
void __iomem *regs;
struct net_device *dev;
struct pci_dev *pdev;
@@ -2060,6 +2065,8 @@ struct tg3 {
u32 msg_enable;
/* begin "tx thread" cacheline section */
+ void (*write32_tx_mbox) (struct tg3 *, u32,
+ u32);
u32 tx_prod;
u32 tx_cons;
u32 tx_pending;
@@ -2071,6 +2078,8 @@ struct tg3 {
dma_addr_t tx_desc_mapping;
/* begin "rx thread" cacheline section */
+ void (*write32_rx_mbox) (struct tg3 *, u32,
+ u32);
u32 rx_rcb_ptr;
u32 rx_std_ptr;
u32 rx_jumbo_ptr;
@@ -2165,6 +2174,7 @@ struct tg3 {
#define TG3_FLG2_ANY_SERDES (TG3_FLG2_PHY_SERDES | \
TG3_FLG2_MII_SERDES)
#define TG3_FLG2_PARALLEL_DETECT 0x01000000
+#define TG3_FLG2_ICH_WORKAROUND 0x02000000
u32 split_mode_max_reqs;
#define SPLIT_MODE_5704_MAX_REQ 3
diff --git a/drivers/net/tokenring/Kconfig b/drivers/net/tokenring/Kconfig
index 7e99e9f8045..e4cfc80b283 100644
--- a/drivers/net/tokenring/Kconfig
+++ b/drivers/net/tokenring/Kconfig
@@ -84,7 +84,7 @@ config 3C359
config TMS380TR
tristate "Generic TMS380 Token Ring ISA/PCI adapter support"
- depends on TR && (PCI || ISA && ISA_DMA_API)
+ depends on TR && (PCI || ISA && ISA_DMA_API || MCA)
select FW_LOADER
---help---
This driver provides generic support for token ring adapters
@@ -158,7 +158,7 @@ config ABYSS
config MADGEMC
tristate "Madge Smart 16/4 Ringnode MicroChannel"
- depends on TR && TMS380TR && MCA_LEGACY
+ depends on TR && TMS380TR && MCA
help
This tms380 module supports the Madge Smart 16/4 MC16 and MC32
MicroChannel adapters.
diff --git a/drivers/net/tokenring/abyss.c b/drivers/net/tokenring/abyss.c
index 87103c40099..9345e68c451 100644
--- a/drivers/net/tokenring/abyss.c
+++ b/drivers/net/tokenring/abyss.c
@@ -139,7 +139,7 @@ static int __devinit abyss_attach(struct pci_dev *pdev, const struct pci_device_
*/
dev->base_addr += 0x10;
- ret = tmsdev_init(dev, PCI_MAX_ADDRESS, pdev);
+ ret = tmsdev_init(dev, &pdev->dev);
if (ret) {
printk("%s: unable to get memory for dev->priv.\n",
dev->name);
diff --git a/drivers/net/tokenring/madgemc.c b/drivers/net/tokenring/madgemc.c
index 659cbdbef7f..3a25d191ea4 100644
--- a/drivers/net/tokenring/madgemc.c
+++ b/drivers/net/tokenring/madgemc.c
@@ -20,7 +20,7 @@
static const char version[] = "madgemc.c: v0.91 23/01/2000 by Adam Fritzler\n";
#include <linux/module.h>
-#include <linux/mca-legacy.h>
+#include <linux/mca.h>
#include <linux/kernel.h>
#include <linux/errno.h>
#include <linux/pci.h>
@@ -38,9 +38,7 @@ static const char version[] = "madgemc.c: v0.91 23/01/2000 by Adam Fritzler\n";
#define MADGEMC_IO_EXTENT 32
#define MADGEMC_SIF_OFFSET 0x08
-struct madgemc_card {
- struct net_device *dev;
-
+struct card_info {
/*
* These are read from the BIA ROM.
*/
@@ -57,16 +55,12 @@ struct madgemc_card {
unsigned int arblevel:4;
unsigned int ringspeed:2; /* 0 = 4mb, 1 = 16, 2 = Auto/none */
unsigned int cabletype:1; /* 0 = RJ45, 1 = DB9 */
-
- struct madgemc_card *next;
};
-static struct madgemc_card *madgemc_card_list;
-
static int madgemc_open(struct net_device *dev);
static int madgemc_close(struct net_device *dev);
static int madgemc_chipset_init(struct net_device *dev);
-static void madgemc_read_rom(struct madgemc_card *card);
+static void madgemc_read_rom(struct net_device *dev, struct card_info *card);
static unsigned short madgemc_setnselout_pins(struct net_device *dev);
static void madgemc_setcabletype(struct net_device *dev, int type);
@@ -151,261 +145,237 @@ static void madgemc_sifwritew(struct net_device *dev, unsigned short val, unsign
-static int __init madgemc_probe(void)
+static int __devinit madgemc_probe(struct device *device)
{
static int versionprinted;
struct net_device *dev;
struct net_local *tp;
- struct madgemc_card *card;
- int i,slot = 0;
- __u8 posreg[4];
-
- if (!MCA_bus)
- return -1;
-
- while (slot != MCA_NOTFOUND) {
- /*
- * Currently we only support the MC16/32 (MCA ID 002d)
- */
- slot = mca_find_unused_adapter(0x002d, slot);
- if (slot == MCA_NOTFOUND)
- break;
-
- /*
- * If we get here, we have an adapter.
- */
- if (versionprinted++ == 0)
- printk("%s", version);
-
- dev = alloc_trdev(sizeof(struct net_local));
- if (dev == NULL) {
- printk("madgemc: unable to allocate dev space\n");
- if (madgemc_card_list)
- return 0;
- return -1;
- }
+ struct card_info *card;
+ struct mca_device *mdev = to_mca_device(device);
+ int ret = 0, i = 0;
+
+ if (versionprinted++ == 0)
+ printk("%s", version);
+
+ if(mca_device_claimed(mdev))
+ return -EBUSY;
+ mca_device_set_claim(mdev, 1);
+
+ dev = alloc_trdev(sizeof(struct net_local));
+ if (!dev) {
+ printk("madgemc: unable to allocate dev space\n");
+ mca_device_set_claim(mdev, 0);
+ ret = -ENOMEM;
+ goto getout;
+ }
- SET_MODULE_OWNER(dev);
- dev->dma = 0;
+ SET_MODULE_OWNER(dev);
+ dev->dma = 0;
- /*
- * Fetch MCA config registers
- */
- for(i=0;i<4;i++)
- posreg[i] = mca_read_stored_pos(slot, i+2);
-
- card = kmalloc(sizeof(struct madgemc_card), GFP_KERNEL);
- if (card==NULL) {
- printk("madgemc: unable to allocate card struct\n");
- free_netdev(dev);
- if (madgemc_card_list)
- return 0;
- return -1;
- }
- card->dev = dev;
-
- /*
- * Parse configuration information. This all comes
- * directly from the publicly available @002d.ADF.
- * Get it from Madge or your local ADF library.
- */
-
- /*
- * Base address
- */
- dev->base_addr = 0x0a20 +
- ((posreg[2] & MC16_POS2_ADDR2)?0x0400:0) +
- ((posreg[0] & MC16_POS0_ADDR1)?0x1000:0) +
- ((posreg[3] & MC16_POS3_ADDR3)?0x2000:0);
-
- /*
- * Interrupt line
- */
- switch(posreg[0] >> 6) { /* upper two bits */
+ card = kmalloc(sizeof(struct card_info), GFP_KERNEL);
+ if (card==NULL) {
+ printk("madgemc: unable to allocate card struct\n");
+ ret = -ENOMEM;
+ goto getout1;
+ }
+
+ /*
+ * Parse configuration information. This all comes
+ * directly from the publicly available @002d.ADF.
+ * Get it from Madge or your local ADF library.
+ */
+
+ /*
+ * Base address
+ */
+ dev->base_addr = 0x0a20 +
+ ((mdev->pos[2] & MC16_POS2_ADDR2)?0x0400:0) +
+ ((mdev->pos[0] & MC16_POS0_ADDR1)?0x1000:0) +
+ ((mdev->pos[3] & MC16_POS3_ADDR3)?0x2000:0);
+
+ /*
+ * Interrupt line
+ */
+ switch(mdev->pos[0] >> 6) { /* upper two bits */
case 0x1: dev->irq = 3; break;
case 0x2: dev->irq = 9; break; /* IRQ 2 = IRQ 9 */
case 0x3: dev->irq = 10; break;
default: dev->irq = 0; break;
- }
+ }
- if (dev->irq == 0) {
- printk("%s: invalid IRQ\n", dev->name);
- goto getout1;
- }
+ if (dev->irq == 0) {
+ printk("%s: invalid IRQ\n", dev->name);
+ ret = -EBUSY;
+ goto getout2;
+ }
- if (!request_region(dev->base_addr, MADGEMC_IO_EXTENT,
- "madgemc")) {
- printk(KERN_INFO "madgemc: unable to setup Smart MC in slot %d because of I/O base conflict at 0x%04lx\n", slot, dev->base_addr);
- dev->base_addr += MADGEMC_SIF_OFFSET;
- goto getout1;
- }
+ if (!request_region(dev->base_addr, MADGEMC_IO_EXTENT,
+ "madgemc")) {
+ printk(KERN_INFO "madgemc: unable to setup Smart MC in slot %d because of I/O base conflict at 0x%04lx\n", mdev->slot, dev->base_addr);
dev->base_addr += MADGEMC_SIF_OFFSET;
+ ret = -EBUSY;
+ goto getout2;
+ }
+ dev->base_addr += MADGEMC_SIF_OFFSET;
+
+ /*
+ * Arbitration Level
+ */
+ card->arblevel = ((mdev->pos[0] >> 1) & 0x7) + 8;
+
+ /*
+ * Burst mode and Fairness
+ */
+ card->burstmode = ((mdev->pos[2] >> 6) & 0x3);
+ card->fairness = ((mdev->pos[2] >> 4) & 0x1);
+
+ /*
+ * Ring Speed
+ */
+ if ((mdev->pos[1] >> 2)&0x1)
+ card->ringspeed = 2; /* not selected */
+ else if ((mdev->pos[2] >> 5) & 0x1)
+ card->ringspeed = 1; /* 16Mb */
+ else
+ card->ringspeed = 0; /* 4Mb */
+
+ /*
+ * Cable type
+ */
+ if ((mdev->pos[1] >> 6)&0x1)
+ card->cabletype = 1; /* STP/DB9 */
+ else
+ card->cabletype = 0; /* UTP/RJ-45 */
+
+
+ /*
+ * ROM Info. This requires us to actually twiddle
+ * bits on the card, so we must ensure above that
+ * the base address is free of conflict (request_region above).
+ */
+ madgemc_read_rom(dev, card);
- /*
- * Arbitration Level
- */
- card->arblevel = ((posreg[0] >> 1) & 0x7) + 8;
-
- /*
- * Burst mode and Fairness
- */
- card->burstmode = ((posreg[2] >> 6) & 0x3);
- card->fairness = ((posreg[2] >> 4) & 0x1);
-
- /*
- * Ring Speed
- */
- if ((posreg[1] >> 2)&0x1)
- card->ringspeed = 2; /* not selected */
- else if ((posreg[2] >> 5) & 0x1)
- card->ringspeed = 1; /* 16Mb */
- else
- card->ringspeed = 0; /* 4Mb */
-
- /*
- * Cable type
- */
- if ((posreg[1] >> 6)&0x1)
- card->cabletype = 1; /* STP/DB9 */
- else
- card->cabletype = 0; /* UTP/RJ-45 */
-
-
- /*
- * ROM Info. This requires us to actually twiddle
- * bits on the card, so we must ensure above that
- * the base address is free of conflict (request_region above).
- */
- madgemc_read_rom(card);
-
- if (card->manid != 0x4d) { /* something went wrong */
- printk(KERN_INFO "%s: Madge MC ROM read failed (unknown manufacturer ID %02x)\n", dev->name, card->manid);
- goto getout;
- }
+ if (card->manid != 0x4d) { /* something went wrong */
+ printk(KERN_INFO "%s: Madge MC ROM read failed (unknown manufacturer ID %02x)\n", dev->name, card->manid);
+ goto getout3;
+ }
- if ((card->cardtype != 0x08) && (card->cardtype != 0x0d)) {
- printk(KERN_INFO "%s: Madge MC ROM read failed (unknown card ID %02x)\n", dev->name, card->cardtype);
- goto getout;
- }
+ if ((card->cardtype != 0x08) && (card->cardtype != 0x0d)) {
+ printk(KERN_INFO "%s: Madge MC ROM read failed (unknown card ID %02x)\n", dev->name, card->cardtype);
+ ret = -EIO;
+ goto getout3;
+ }
- /* All cards except Rev 0 and 1 MC16's have 256kb of RAM */
- if ((card->cardtype == 0x08) && (card->cardrev <= 0x01))
- card->ramsize = 128;
- else
- card->ramsize = 256;
-
- printk("%s: %s Rev %d at 0x%04lx IRQ %d\n",
- dev->name,
- (card->cardtype == 0x08)?MADGEMC16_CARDNAME:
- MADGEMC32_CARDNAME, card->cardrev,
- dev->base_addr, dev->irq);
-
- if (card->cardtype == 0x0d)
- printk("%s: Warning: MC32 support is experimental and highly untested\n", dev->name);
-
- if (card->ringspeed==2) { /* Unknown */
- printk("%s: Warning: Ring speed not set in POS -- Please run the reference disk and set it!\n", dev->name);
- card->ringspeed = 1; /* default to 16mb */
- }
+ /* All cards except Rev 0 and 1 MC16's have 256kb of RAM */
+ if ((card->cardtype == 0x08) && (card->cardrev <= 0x01))
+ card->ramsize = 128;
+ else
+ card->ramsize = 256;
+
+ printk("%s: %s Rev %d at 0x%04lx IRQ %d\n",
+ dev->name,
+ (card->cardtype == 0x08)?MADGEMC16_CARDNAME:
+ MADGEMC32_CARDNAME, card->cardrev,
+ dev->base_addr, dev->irq);
+
+ if (card->cardtype == 0x0d)
+ printk("%s: Warning: MC32 support is experimental and highly untested\n", dev->name);
+
+ if (card->ringspeed==2) { /* Unknown */
+ printk("%s: Warning: Ring speed not set in POS -- Please run the reference disk and set it!\n", dev->name);
+ card->ringspeed = 1; /* default to 16mb */
+ }
- printk("%s: RAM Size: %dKB\n", dev->name, card->ramsize);
+ printk("%s: RAM Size: %dKB\n", dev->name, card->ramsize);
- printk("%s: Ring Speed: %dMb/sec on %s\n", dev->name,
- (card->ringspeed)?16:4,
- card->cabletype?"STP/DB9":"UTP/RJ-45");
- printk("%s: Arbitration Level: %d\n", dev->name,
- card->arblevel);
+ printk("%s: Ring Speed: %dMb/sec on %s\n", dev->name,
+ (card->ringspeed)?16:4,
+ card->cabletype?"STP/DB9":"UTP/RJ-45");
+ printk("%s: Arbitration Level: %d\n", dev->name,
+ card->arblevel);
- printk("%s: Burst Mode: ", dev->name);
- switch(card->burstmode) {
+ printk("%s: Burst Mode: ", dev->name);
+ switch(card->burstmode) {
case 0: printk("Cycle steal"); break;
case 1: printk("Limited burst"); break;
case 2: printk("Delayed release"); break;
case 3: printk("Immediate release"); break;
- }
- printk(" (%s)\n", (card->fairness)?"Unfair":"Fair");
-
-
- /*
- * Enable SIF before we assign the interrupt handler,
- * just in case we get spurious interrupts that need
- * handling.
- */
- outb(0, dev->base_addr + MC_CONTROL_REG0); /* sanity */
- madgemc_setsifsel(dev, 1);
- if (request_irq(dev->irq, madgemc_interrupt, SA_SHIRQ,
- "madgemc", dev))
- goto getout;
-
- madgemc_chipset_init(dev); /* enables interrupts! */
- madgemc_setcabletype(dev, card->cabletype);
+ }
+ printk(" (%s)\n", (card->fairness)?"Unfair":"Fair");
- /* Setup MCA structures */
- mca_set_adapter_name(slot, (card->cardtype == 0x08)?MADGEMC16_CARDNAME:MADGEMC32_CARDNAME);
- mca_set_adapter_procfn(slot, madgemc_mcaproc, dev);
- mca_mark_as_used(slot);
- printk("%s: Ring Station Address: ", dev->name);
- printk("%2.2x", dev->dev_addr[0]);
- for (i = 1; i < 6; i++)
- printk(":%2.2x", dev->dev_addr[i]);
- printk("\n");
-
- /* XXX is ISA_MAX_ADDRESS correct here? */
- if (tmsdev_init(dev, ISA_MAX_ADDRESS, NULL)) {
- printk("%s: unable to get memory for dev->priv.\n",
- dev->name);
- release_region(dev->base_addr-MADGEMC_SIF_OFFSET,
- MADGEMC_IO_EXTENT);
-
- kfree(card);
- tmsdev_term(dev);
- free_netdev(dev);
- if (madgemc_card_list)
- return 0;
- return -1;
- }
- tp = netdev_priv(dev);
-
- /*
- * The MC16 is physically a 32bit card. However, Madge
- * insists on calling it 16bit, so I'll assume here that
- * they know what they're talking about. Cut off DMA
- * at 16mb.
- */
- tp->setnselout = madgemc_setnselout_pins;
- tp->sifwriteb = madgemc_sifwriteb;
- tp->sifreadb = madgemc_sifreadb;
- tp->sifwritew = madgemc_sifwritew;
- tp->sifreadw = madgemc_sifreadw;
- tp->DataRate = (card->ringspeed)?SPEED_16:SPEED_4;
-
- memcpy(tp->ProductID, "Madge MCA 16/4 ", PROD_ID_SIZE + 1);
-
- dev->open = madgemc_open;
- dev->stop = madgemc_close;
-
- if (register_netdev(dev) == 0) {
- /* Enlist in the card list */
- card->next = madgemc_card_list;
- madgemc_card_list = card;
- slot++;
- continue; /* successful, try to find another */
- }
-
- free_irq(dev->irq, dev);
- getout:
- release_region(dev->base_addr-MADGEMC_SIF_OFFSET,
- MADGEMC_IO_EXTENT);
- getout1:
- kfree(card);
- free_netdev(dev);
- slot++;
+ /*
+ * Enable SIF before we assign the interrupt handler,
+ * just in case we get spurious interrupts that need
+ * handling.
+ */
+ outb(0, dev->base_addr + MC_CONTROL_REG0); /* sanity */
+ madgemc_setsifsel(dev, 1);
+ if (request_irq(dev->irq, madgemc_interrupt, SA_SHIRQ,
+ "madgemc", dev)) {
+ ret = -EBUSY;
+ goto getout3;
}
- if (madgemc_card_list)
+ madgemc_chipset_init(dev); /* enables interrupts! */
+ madgemc_setcabletype(dev, card->cabletype);
+
+ /* Setup MCA structures */
+ mca_device_set_name(mdev, (card->cardtype == 0x08)?MADGEMC16_CARDNAME:MADGEMC32_CARDNAME);
+ mca_set_adapter_procfn(mdev->slot, madgemc_mcaproc, dev);
+
+ printk("%s: Ring Station Address: ", dev->name);
+ printk("%2.2x", dev->dev_addr[0]);
+ for (i = 1; i < 6; i++)
+ printk(":%2.2x", dev->dev_addr[i]);
+ printk("\n");
+
+ if (tmsdev_init(dev, device)) {
+ printk("%s: unable to get memory for dev->priv.\n",
+ dev->name);
+ ret = -ENOMEM;
+ goto getout4;
+ }
+ tp = netdev_priv(dev);
+
+ /*
+ * The MC16 is physically a 32bit card. However, Madge
+ * insists on calling it 16bit, so I'll assume here that
+ * they know what they're talking about. Cut off DMA
+ * at 16mb.
+ */
+ tp->setnselout = madgemc_setnselout_pins;
+ tp->sifwriteb = madgemc_sifwriteb;
+ tp->sifreadb = madgemc_sifreadb;
+ tp->sifwritew = madgemc_sifwritew;
+ tp->sifreadw = madgemc_sifreadw;
+ tp->DataRate = (card->ringspeed)?SPEED_16:SPEED_4;
+
+ memcpy(tp->ProductID, "Madge MCA 16/4 ", PROD_ID_SIZE + 1);
+
+ dev->open = madgemc_open;
+ dev->stop = madgemc_close;
+
+ tp->tmspriv = card;
+ dev_set_drvdata(device, dev);
+
+ if (register_netdev(dev) == 0)
return 0;
- return -1;
+
+ dev_set_drvdata(device, NULL);
+ ret = -ENOMEM;
+getout4:
+ free_irq(dev->irq, dev);
+getout3:
+ release_region(dev->base_addr-MADGEMC_SIF_OFFSET,
+ MADGEMC_IO_EXTENT);
+getout2:
+ kfree(card);
+getout1:
+ free_netdev(dev);
+getout:
+ mca_device_set_claim(mdev, 0);
+ return ret;
}
/*
@@ -664,12 +634,12 @@ static void madgemc_chipset_close(struct net_device *dev)
* is complete.
*
*/
-static void madgemc_read_rom(struct madgemc_card *card)
+static void madgemc_read_rom(struct net_device *dev, struct card_info *card)
{
unsigned long ioaddr;
unsigned char reg0, reg1, tmpreg0, i;
- ioaddr = card->dev->base_addr;
+ ioaddr = dev->base_addr;
reg0 = inb(ioaddr + MC_CONTROL_REG0);
reg1 = inb(ioaddr + MC_CONTROL_REG1);
@@ -686,9 +656,9 @@ static void madgemc_read_rom(struct madgemc_card *card)
outb(tmpreg0 | MC_CONTROL_REG0_PAGE, ioaddr + MC_CONTROL_REG0);
/* Read BIA */
- card->dev->addr_len = 6;
+ dev->addr_len = 6;
for (i = 0; i < 6; i++)
- card->dev->dev_addr[i] = inb(ioaddr + MC_ROM_BIA_START + i);
+ dev->dev_addr[i] = inb(ioaddr + MC_ROM_BIA_START + i);
/* Restore original register values */
outb(reg0, ioaddr + MC_CONTROL_REG0);
@@ -721,14 +691,10 @@ static int madgemc_close(struct net_device *dev)
static int madgemc_mcaproc(char *buf, int slot, void *d)
{
struct net_device *dev = (struct net_device *)d;
- struct madgemc_card *curcard = madgemc_card_list;
+ struct net_local *tp = dev->priv;
+ struct card_info *curcard = tp->tmspriv;
int len = 0;
- while (curcard) { /* search for card struct */
- if (curcard->dev == dev)
- break;
- curcard = curcard->next;
- }
len += sprintf(buf+len, "-------\n");
if (curcard) {
struct net_local *tp = netdev_priv(dev);
@@ -763,25 +729,56 @@ static int madgemc_mcaproc(char *buf, int slot, void *d)
return len;
}
-static void __exit madgemc_exit(void)
+static int __devexit madgemc_remove(struct device *device)
{
- struct net_device *dev;
- struct madgemc_card *this_card;
-
- while (madgemc_card_list) {
- dev = madgemc_card_list->dev;
- unregister_netdev(dev);
- release_region(dev->base_addr-MADGEMC_SIF_OFFSET, MADGEMC_IO_EXTENT);
- free_irq(dev->irq, dev);
- tmsdev_term(dev);
- free_netdev(dev);
- this_card = madgemc_card_list;
- madgemc_card_list = this_card->next;
- kfree(this_card);
- }
+ struct net_device *dev = dev_get_drvdata(device);
+ struct net_local *tp;
+ struct card_info *card;
+
+ if (!dev)
+ BUG();
+
+ tp = dev->priv;
+ card = tp->tmspriv;
+ kfree(card);
+ tp->tmspriv = NULL;
+
+ unregister_netdev(dev);
+ release_region(dev->base_addr-MADGEMC_SIF_OFFSET, MADGEMC_IO_EXTENT);
+ free_irq(dev->irq, dev);
+ tmsdev_term(dev);
+ free_netdev(dev);
+ dev_set_drvdata(device, NULL);
+
+ return 0;
+}
+
+static short madgemc_adapter_ids[] __initdata = {
+ 0x002d,
+ 0x0000
+};
+
+static struct mca_driver madgemc_driver = {
+ .id_table = madgemc_adapter_ids,
+ .driver = {
+ .name = "madgemc",
+ .bus = &mca_bus_type,
+ .probe = madgemc_probe,
+ .remove = __devexit_p(madgemc_remove),
+ },
+};
+
+static int __init madgemc_init (void)
+{
+ return mca_register_driver (&madgemc_driver);
+}
+
+static void __exit madgemc_exit (void)
+{
+ mca_unregister_driver (&madgemc_driver);
}
-module_init(madgemc_probe);
+module_init(madgemc_init);
module_exit(madgemc_exit);
MODULE_LICENSE("GPL");
diff --git a/drivers/net/tokenring/proteon.c b/drivers/net/tokenring/proteon.c
index 40ad0fde28a..eb1423ede75 100644
--- a/drivers/net/tokenring/proteon.c
+++ b/drivers/net/tokenring/proteon.c
@@ -62,8 +62,7 @@ static int dmalist[] __initdata = {
};
static char cardname[] = "Proteon 1392\0";
-
-struct net_device *proteon_probe(int unit);
+static u64 dma_mask = ISA_MAX_ADDRESS;
static int proteon_open(struct net_device *dev);
static void proteon_read_eeprom(struct net_device *dev);
static unsigned short proteon_setnselout_pins(struct net_device *dev);
@@ -116,7 +115,7 @@ nodev:
return -ENODEV;
}
-static int __init setup_card(struct net_device *dev)
+static int __init setup_card(struct net_device *dev, struct device *pdev)
{
struct net_local *tp;
static int versionprinted;
@@ -137,7 +136,7 @@ static int __init setup_card(struct net_device *dev)
}
}
if (err)
- goto out4;
+ goto out5;
/* At this point we have found a valid card. */
@@ -145,14 +144,15 @@ static int __init setup_card(struct net_device *dev)
printk(KERN_DEBUG "%s", version);
err = -EIO;
- if (tmsdev_init(dev, ISA_MAX_ADDRESS, NULL))
+ pdev->dma_mask = &dma_mask;
+ if (tmsdev_init(dev, pdev))
goto out4;
dev->base_addr &= ~3;
proteon_read_eeprom(dev);
- printk(KERN_DEBUG "%s: Ring Station Address: ", dev->name);
+ printk(KERN_DEBUG "proteon.c: Ring Station Address: ");
printk("%2.2x", dev->dev_addr[0]);
for (j = 1; j < 6; j++)
printk(":%2.2x", dev->dev_addr[j]);
@@ -185,7 +185,7 @@ static int __init setup_card(struct net_device *dev)
if(irqlist[j] == 0)
{
- printk(KERN_INFO "%s: AutoSelect no IRQ available\n", dev->name);
+ printk(KERN_INFO "proteon.c: AutoSelect no IRQ available\n");
goto out3;
}
}
@@ -196,15 +196,15 @@ static int __init setup_card(struct net_device *dev)
break;
if (irqlist[j] == 0)
{
- printk(KERN_INFO "%s: Illegal IRQ %d specified\n",
- dev->name, dev->irq);
+ printk(KERN_INFO "proteon.c: Illegal IRQ %d specified\n",
+ dev->irq);
goto out3;
}
if (request_irq(dev->irq, tms380tr_interrupt, 0,
cardname, dev))
{
- printk(KERN_INFO "%s: Selected IRQ %d not available\n",
- dev->name, dev->irq);
+ printk(KERN_INFO "proteon.c: Selected IRQ %d not available\n",
+ dev->irq);
goto out3;
}
}
@@ -220,7 +220,7 @@ static int __init setup_card(struct net_device *dev)
if(dmalist[j] == 0)
{
- printk(KERN_INFO "%s: AutoSelect no DMA available\n", dev->name);
+ printk(KERN_INFO "proteon.c: AutoSelect no DMA available\n");
goto out2;
}
}
@@ -231,25 +231,25 @@ static int __init setup_card(struct net_device *dev)
break;
if (dmalist[j] == 0)
{
- printk(KERN_INFO "%s: Illegal DMA %d specified\n",
- dev->name, dev->dma);
+ printk(KERN_INFO "proteon.c: Illegal DMA %d specified\n",
+ dev->dma);
goto out2;
}
if (request_dma(dev->dma, cardname))
{
- printk(KERN_INFO "%s: Selected DMA %d not available\n",
- dev->name, dev->dma);
+ printk(KERN_INFO "proteon.c: Selected DMA %d not available\n",
+ dev->dma);
goto out2;
}
}
- printk(KERN_DEBUG "%s: IO: %#4lx IRQ: %d DMA: %d\n",
- dev->name, dev->base_addr, dev->irq, dev->dma);
-
err = register_netdev(dev);
if (err)
goto out;
+ printk(KERN_DEBUG "%s: IO: %#4lx IRQ: %d DMA: %d\n",
+ dev->name, dev->base_addr, dev->irq, dev->dma);
+
return 0;
out:
free_dma(dev->dma);
@@ -258,34 +258,11 @@ out2:
out3:
tmsdev_term(dev);
out4:
- release_region(dev->base_addr, PROTEON_IO_EXTENT);
+ release_region(dev->base_addr, PROTEON_IO_EXTENT);
+out5:
return err;
}
-struct net_device * __init proteon_probe(int unit)
-{
- struct net_device *dev = alloc_trdev(sizeof(struct net_local));
- int err = 0;
-
- if (!dev)
- return ERR_PTR(-ENOMEM);
-
- if (unit >= 0) {
- sprintf(dev->name, "tr%d", unit);
- netdev_boot_setup_check(dev);
- }
-
- err = setup_card(dev);
- if (err)
- goto out;
-
- return dev;
-
-out:
- free_netdev(dev);
- return ERR_PTR(err);
-}
-
/*
* Reads MAC address from adapter RAM, which should've read it from
* the onboard ROM.
@@ -352,8 +329,6 @@ static int proteon_open(struct net_device *dev)
return tms380tr_open(dev);
}
-#ifdef MODULE
-
#define ISATR_MAX_ADAPTERS 3
static int io[ISATR_MAX_ADAPTERS];
@@ -366,13 +341,23 @@ module_param_array(io, int, NULL, 0);
module_param_array(irq, int, NULL, 0);
module_param_array(dma, int, NULL, 0);
-static struct net_device *proteon_dev[ISATR_MAX_ADAPTERS];
+static struct platform_device *proteon_dev[ISATR_MAX_ADAPTERS];
+
+static struct device_driver proteon_driver = {
+ .name = "proteon",
+ .bus = &platform_bus_type,
+};
-int init_module(void)
+static int __init proteon_init(void)
{
struct net_device *dev;
+ struct platform_device *pdev;
int i, num = 0, err = 0;
+ err = driver_register(&proteon_driver);
+ if (err)
+ return err;
+
for (i = 0; i < ISATR_MAX_ADAPTERS ; i++) {
dev = alloc_trdev(sizeof(struct net_local));
if (!dev)
@@ -381,11 +366,15 @@ int init_module(void)
dev->base_addr = io[i];
dev->irq = irq[i];
dev->dma = dma[i];
- err = setup_card(dev);
+ pdev = platform_device_register_simple("proteon",
+ i, NULL, 0);
+ err = setup_card(dev, &pdev->dev);
if (!err) {
- proteon_dev[i] = dev;
+ proteon_dev[i] = pdev;
+ dev_set_drvdata(&pdev->dev, dev);
++num;
} else {
+ platform_device_unregister(pdev);
free_netdev(dev);
}
}
@@ -399,23 +388,28 @@ int init_module(void)
return (0);
}
-void cleanup_module(void)
+static void __exit proteon_cleanup(void)
{
+ struct net_device *dev;
int i;
for (i = 0; i < ISATR_MAX_ADAPTERS ; i++) {
- struct net_device *dev = proteon_dev[i];
+ struct platform_device *pdev = proteon_dev[i];
- if (!dev)
+ if (!pdev)
continue;
-
+ dev = dev_get_drvdata(&pdev->dev);
unregister_netdev(dev);
release_region(dev->base_addr, PROTEON_IO_EXTENT);
free_irq(dev->irq, dev);
free_dma(dev->dma);
tmsdev_term(dev);
free_netdev(dev);
+ dev_set_drvdata(&pdev->dev, NULL);
+ platform_device_unregister(pdev);
}
+ driver_unregister(&proteon_driver);
}
-#endif /* MODULE */
+module_init(proteon_init);
+module_exit(proteon_cleanup);
diff --git a/drivers/net/tokenring/skisa.c b/drivers/net/tokenring/skisa.c
index f26796e2d0e..3c7c66204f7 100644
--- a/drivers/net/tokenring/skisa.c
+++ b/drivers/net/tokenring/skisa.c
@@ -68,8 +68,7 @@ static int dmalist[] __initdata = {
};
static char isa_cardname[] = "SK NET TR 4/16 ISA\0";
-
-struct net_device *sk_isa_probe(int unit);
+static u64 dma_mask = ISA_MAX_ADDRESS;
static int sk_isa_open(struct net_device *dev);
static void sk_isa_read_eeprom(struct net_device *dev);
static unsigned short sk_isa_setnselout_pins(struct net_device *dev);
@@ -133,7 +132,7 @@ static int __init sk_isa_probe1(struct net_device *dev, int ioaddr)
return 0;
}
-static int __init setup_card(struct net_device *dev)
+static int __init setup_card(struct net_device *dev, struct device *pdev)
{
struct net_local *tp;
static int versionprinted;
@@ -154,7 +153,7 @@ static int __init setup_card(struct net_device *dev)
}
}
if (err)
- goto out4;
+ goto out5;
/* At this point we have found a valid card. */
@@ -162,14 +161,15 @@ static int __init setup_card(struct net_device *dev)
printk(KERN_DEBUG "%s", version);
err = -EIO;
- if (tmsdev_init(dev, ISA_MAX_ADDRESS, NULL))
+ pdev->dma_mask = &dma_mask;
+ if (tmsdev_init(dev, pdev))
goto out4;
dev->base_addr &= ~3;
sk_isa_read_eeprom(dev);
- printk(KERN_DEBUG "%s: Ring Station Address: ", dev->name);
+ printk(KERN_DEBUG "skisa.c: Ring Station Address: ");
printk("%2.2x", dev->dev_addr[0]);
for (j = 1; j < 6; j++)
printk(":%2.2x", dev->dev_addr[j]);
@@ -202,7 +202,7 @@ static int __init setup_card(struct net_device *dev)
if(irqlist[j] == 0)
{
- printk(KERN_INFO "%s: AutoSelect no IRQ available\n", dev->name);
+ printk(KERN_INFO "skisa.c: AutoSelect no IRQ available\n");
goto out3;
}
}
@@ -213,15 +213,15 @@ static int __init setup_card(struct net_device *dev)
break;
if (irqlist[j] == 0)
{
- printk(KERN_INFO "%s: Illegal IRQ %d specified\n",
- dev->name, dev->irq);
+ printk(KERN_INFO "skisa.c: Illegal IRQ %d specified\n",
+ dev->irq);
goto out3;
}
if (request_irq(dev->irq, tms380tr_interrupt, 0,
isa_cardname, dev))
{
- printk(KERN_INFO "%s: Selected IRQ %d not available\n",
- dev->name, dev->irq);
+ printk(KERN_INFO "skisa.c: Selected IRQ %d not available\n",
+ dev->irq);
goto out3;
}
}
@@ -237,7 +237,7 @@ static int __init setup_card(struct net_device *dev)
if(dmalist[j] == 0)
{
- printk(KERN_INFO "%s: AutoSelect no DMA available\n", dev->name);
+ printk(KERN_INFO "skisa.c: AutoSelect no DMA available\n");
goto out2;
}
}
@@ -248,25 +248,25 @@ static int __init setup_card(struct net_device *dev)
break;
if (dmalist[j] == 0)
{
- printk(KERN_INFO "%s: Illegal DMA %d specified\n",
- dev->name, dev->dma);
+ printk(KERN_INFO "skisa.c: Illegal DMA %d specified\n",
+ dev->dma);
goto out2;
}
if (request_dma(dev->dma, isa_cardname))
{
- printk(KERN_INFO "%s: Selected DMA %d not available\n",
- dev->name, dev->dma);
+ printk(KERN_INFO "skisa.c: Selected DMA %d not available\n",
+ dev->dma);
goto out2;
}
}
- printk(KERN_DEBUG "%s: IO: %#4lx IRQ: %d DMA: %d\n",
- dev->name, dev->base_addr, dev->irq, dev->dma);
-
err = register_netdev(dev);
if (err)
goto out;
+ printk(KERN_DEBUG "%s: IO: %#4lx IRQ: %d DMA: %d\n",
+ dev->name, dev->base_addr, dev->irq, dev->dma);
+
return 0;
out:
free_dma(dev->dma);
@@ -275,33 +275,11 @@ out2:
out3:
tmsdev_term(dev);
out4:
- release_region(dev->base_addr, SK_ISA_IO_EXTENT);
+ release_region(dev->base_addr, SK_ISA_IO_EXTENT);
+out5:
return err;
}
-struct net_device * __init sk_isa_probe(int unit)
-{
- struct net_device *dev = alloc_trdev(sizeof(struct net_local));
- int err = 0;
-
- if (!dev)
- return ERR_PTR(-ENOMEM);
-
- if (unit >= 0) {
- sprintf(dev->name, "tr%d", unit);
- netdev_boot_setup_check(dev);
- }
-
- err = setup_card(dev);
- if (err)
- goto out;
-
- return dev;
-out:
- free_netdev(dev);
- return ERR_PTR(err);
-}
-
/*
* Reads MAC address from adapter RAM, which should've read it from
* the onboard ROM.
@@ -361,8 +339,6 @@ static int sk_isa_open(struct net_device *dev)
return tms380tr_open(dev);
}
-#ifdef MODULE
-
#define ISATR_MAX_ADAPTERS 3
static int io[ISATR_MAX_ADAPTERS];
@@ -375,13 +351,23 @@ module_param_array(io, int, NULL, 0);
module_param_array(irq, int, NULL, 0);
module_param_array(dma, int, NULL, 0);
-static struct net_device *sk_isa_dev[ISATR_MAX_ADAPTERS];
+static struct platform_device *sk_isa_dev[ISATR_MAX_ADAPTERS];
-int init_module(void)
+static struct device_driver sk_isa_driver = {
+ .name = "skisa",
+ .bus = &platform_bus_type,
+};
+
+static int __init sk_isa_init(void)
{
struct net_device *dev;
+ struct platform_device *pdev;
int i, num = 0, err = 0;
+ err = driver_register(&sk_isa_driver);
+ if (err)
+ return err;
+
for (i = 0; i < ISATR_MAX_ADAPTERS ; i++) {
dev = alloc_trdev(sizeof(struct net_local));
if (!dev)
@@ -390,12 +376,15 @@ int init_module(void)
dev->base_addr = io[i];
dev->irq = irq[i];
dev->dma = dma[i];
- err = setup_card(dev);
-
+ pdev = platform_device_register_simple("skisa",
+ i, NULL, 0);
+ err = setup_card(dev, &pdev->dev);
if (!err) {
- sk_isa_dev[i] = dev;
+ sk_isa_dev[i] = pdev;
+ dev_set_drvdata(&sk_isa_dev[i]->dev, dev);
++num;
} else {
+ platform_device_unregister(pdev);
free_netdev(dev);
}
}
@@ -409,23 +398,28 @@ int init_module(void)
return (0);
}
-void cleanup_module(void)
+static void __exit sk_isa_cleanup(void)
{
+ struct net_device *dev;
int i;
for (i = 0; i < ISATR_MAX_ADAPTERS ; i++) {
- struct net_device *dev = sk_isa_dev[i];
+ struct platform_device *pdev = sk_isa_dev[i];
- if (!dev)
+ if (!pdev)
continue;
-
+ dev = dev_get_drvdata(&pdev->dev);
unregister_netdev(dev);
release_region(dev->base_addr, SK_ISA_IO_EXTENT);
free_irq(dev->irq, dev);
free_dma(dev->dma);
tmsdev_term(dev);
free_netdev(dev);
+ dev_set_drvdata(&pdev->dev, NULL);
+ platform_device_unregister(pdev);
}
+ driver_unregister(&sk_isa_driver);
}
-#endif /* MODULE */
+module_init(sk_isa_init);
+module_exit(sk_isa_cleanup);
diff --git a/drivers/net/tokenring/tms380tr.c b/drivers/net/tokenring/tms380tr.c
index 5e0b0ce98ed..2e39bf1f746 100644
--- a/drivers/net/tokenring/tms380tr.c
+++ b/drivers/net/tokenring/tms380tr.c
@@ -62,6 +62,7 @@
* normal operation.
* 30-Dec-02 JF Removed incorrect __init from
* tms380tr_init_card.
+ * 22-Jul-05 JF Converted to dma-mapping.
*
* To do:
* 1. Multi/Broadcast packet handling (this may have fixed itself)
@@ -89,7 +90,7 @@ static const char version[] = "tms380tr.c: v1.10 30/12/2002 by Christoph Goos, A
#include <linux/time.h>
#include <linux/errno.h>
#include <linux/init.h>
-#include <linux/pci.h>
+#include <linux/dma-mapping.h>
#include <linux/delay.h>
#include <linux/netdevice.h>
#include <linux/etherdevice.h>
@@ -114,8 +115,6 @@ static const char version[] = "tms380tr.c: v1.10 30/12/2002 by Christoph Goos, A
#endif
static unsigned int tms380tr_debug = TMS380TR_DEBUG;
-static struct device tms_device;
-
/* Index to functions, as function prototypes.
* Alphabetical by function name.
*/
@@ -434,7 +433,7 @@ static void tms380tr_init_net_local(struct net_device *dev)
skb_put(tp->Rpl[i].Skb, tp->MaxPacketSize);
/* data unreachable for DMA ? then use local buffer */
- dmabuf = pci_map_single(tp->pdev, tp->Rpl[i].Skb->data, tp->MaxPacketSize, PCI_DMA_FROMDEVICE);
+ dmabuf = dma_map_single(tp->pdev, tp->Rpl[i].Skb->data, tp->MaxPacketSize, DMA_FROM_DEVICE);
if(tp->dmalimit && (dmabuf + tp->MaxPacketSize > tp->dmalimit))
{
tp->Rpl[i].SkbStat = SKB_DATA_COPY;
@@ -638,10 +637,10 @@ static int tms380tr_hardware_send_packet(struct sk_buff *skb, struct net_device
/* Is buffer reachable for Busmaster-DMA? */
length = skb->len;
- dmabuf = pci_map_single(tp->pdev, skb->data, length, PCI_DMA_TODEVICE);
+ dmabuf = dma_map_single(tp->pdev, skb->data, length, DMA_TO_DEVICE);
if(tp->dmalimit && (dmabuf + length > tp->dmalimit)) {
/* Copy frame to local buffer */
- pci_unmap_single(tp->pdev, dmabuf, length, PCI_DMA_TODEVICE);
+ dma_unmap_single(tp->pdev, dmabuf, length, DMA_TO_DEVICE);
dmabuf = 0;
i = tp->TplFree->TPLIndex;
buf = tp->LocalTxBuffers[i];
@@ -1284,9 +1283,7 @@ static int tms380tr_reset_adapter(struct net_device *dev)
unsigned short count, c, count2;
const struct firmware *fw_entry = NULL;
- strncpy(tms_device.bus_id,dev->name, BUS_ID_SIZE);
-
- if (request_firmware(&fw_entry, "tms380tr.bin", &tms_device) != 0) {
+ if (request_firmware(&fw_entry, "tms380tr.bin", tp->pdev) != 0) {
printk(KERN_ALERT "%s: firmware %s is missing, cannot start.\n",
dev->name, "tms380tr.bin");
return (-1);
@@ -2021,7 +2018,7 @@ static void tms380tr_cancel_tx_queue(struct net_local* tp)
printk(KERN_INFO "Cancel tx (%08lXh).\n", (unsigned long)tpl);
if (tpl->DMABuff)
- pci_unmap_single(tp->pdev, tpl->DMABuff, tpl->Skb->len, PCI_DMA_TODEVICE);
+ dma_unmap_single(tp->pdev, tpl->DMABuff, tpl->Skb->len, DMA_TO_DEVICE);
dev_kfree_skb_any(tpl->Skb);
}
@@ -2090,7 +2087,7 @@ static void tms380tr_tx_status_irq(struct net_device *dev)
tp->MacStat.tx_packets++;
if (tpl->DMABuff)
- pci_unmap_single(tp->pdev, tpl->DMABuff, tpl->Skb->len, PCI_DMA_TODEVICE);
+ dma_unmap_single(tp->pdev, tpl->DMABuff, tpl->Skb->len, DMA_TO_DEVICE);
dev_kfree_skb_irq(tpl->Skb);
tpl->BusyFlag = 0; /* "free" TPL */
}
@@ -2209,7 +2206,7 @@ static void tms380tr_rcv_status_irq(struct net_device *dev)
tp->MacStat.rx_errors++;
}
if (rpl->DMABuff)
- pci_unmap_single(tp->pdev, rpl->DMABuff, tp->MaxPacketSize, PCI_DMA_TODEVICE);
+ dma_unmap_single(tp->pdev, rpl->DMABuff, tp->MaxPacketSize, DMA_TO_DEVICE);
rpl->DMABuff = 0;
/* Allocate new skb for rpl */
@@ -2227,7 +2224,7 @@ static void tms380tr_rcv_status_irq(struct net_device *dev)
skb_put(rpl->Skb, tp->MaxPacketSize);
/* Data unreachable for DMA ? then use local buffer */
- dmabuf = pci_map_single(tp->pdev, rpl->Skb->data, tp->MaxPacketSize, PCI_DMA_FROMDEVICE);
+ dmabuf = dma_map_single(tp->pdev, rpl->Skb->data, tp->MaxPacketSize, DMA_FROM_DEVICE);
if(tp->dmalimit && (dmabuf + tp->MaxPacketSize > tp->dmalimit))
{
rpl->SkbStat = SKB_DATA_COPY;
@@ -2332,23 +2329,26 @@ void tmsdev_term(struct net_device *dev)
struct net_local *tp;
tp = netdev_priv(dev);
- pci_unmap_single(tp->pdev, tp->dmabuffer, sizeof(struct net_local),
- PCI_DMA_BIDIRECTIONAL);
+ dma_unmap_single(tp->pdev, tp->dmabuffer, sizeof(struct net_local),
+ DMA_BIDIRECTIONAL);
}
-int tmsdev_init(struct net_device *dev, unsigned long dmalimit,
- struct pci_dev *pdev)
+int tmsdev_init(struct net_device *dev, struct device *pdev)
{
struct net_local *tms_local;
memset(dev->priv, 0, sizeof(struct net_local));
tms_local = netdev_priv(dev);
init_waitqueue_head(&tms_local->wait_for_tok_int);
- tms_local->dmalimit = dmalimit;
+ if (pdev->dma_mask)
+ tms_local->dmalimit = *pdev->dma_mask;
+ else
+ return -ENOMEM;
tms_local->pdev = pdev;
- tms_local->dmabuffer = pci_map_single(pdev, (void *)tms_local,
- sizeof(struct net_local), PCI_DMA_BIDIRECTIONAL);
- if (tms_local->dmabuffer + sizeof(struct net_local) > dmalimit)
+ tms_local->dmabuffer = dma_map_single(pdev, (void *)tms_local,
+ sizeof(struct net_local), DMA_BIDIRECTIONAL);
+ if (tms_local->dmabuffer + sizeof(struct net_local) >
+ tms_local->dmalimit)
{
printk(KERN_INFO "%s: Memory not accessible for DMA\n",
dev->name);
@@ -2370,8 +2370,6 @@ int tmsdev_init(struct net_device *dev, unsigned long dmalimit,
return 0;
}
-#ifdef MODULE
-
EXPORT_SYMBOL(tms380tr_open);
EXPORT_SYMBOL(tms380tr_close);
EXPORT_SYMBOL(tms380tr_interrupt);
@@ -2379,6 +2377,8 @@ EXPORT_SYMBOL(tmsdev_init);
EXPORT_SYMBOL(tmsdev_term);
EXPORT_SYMBOL(tms380tr_wait);
+#ifdef MODULE
+
static struct module *TMS380_module = NULL;
int init_module(void)
diff --git a/drivers/net/tokenring/tms380tr.h b/drivers/net/tokenring/tms380tr.h
index f2c5ba0f37a..30452c67bb6 100644
--- a/drivers/net/tokenring/tms380tr.h
+++ b/drivers/net/tokenring/tms380tr.h
@@ -17,8 +17,7 @@
int tms380tr_open(struct net_device *dev);
int tms380tr_close(struct net_device *dev);
irqreturn_t tms380tr_interrupt(int irq, void *dev_id, struct pt_regs *regs);
-int tmsdev_init(struct net_device *dev, unsigned long dmalimit,
- struct pci_dev *pdev);
+int tmsdev_init(struct net_device *dev, struct device *pdev);
void tmsdev_term(struct net_device *dev);
void tms380tr_wait(unsigned long time);
@@ -719,7 +718,7 @@ struct s_TPL { /* Transmit Parameter List (align on even word boundaries) */
struct sk_buff *Skb;
unsigned char TPLIndex;
volatile unsigned char BusyFlag;/* Flag: TPL busy? */
- dma_addr_t DMABuff; /* DMA IO bus address from pci_map */
+ dma_addr_t DMABuff; /* DMA IO bus address from dma_map */
};
/* ---------------------Receive Functions-------------------------------*
@@ -1060,7 +1059,7 @@ struct s_RPL { /* Receive Parameter List */
struct sk_buff *Skb;
SKB_STAT SkbStat;
int RPLIndex;
- dma_addr_t DMABuff; /* DMA IO bus address from pci_map */
+ dma_addr_t DMABuff; /* DMA IO bus address from dma_map */
};
/* Information that need to be kept for each board. */
@@ -1091,7 +1090,7 @@ typedef struct net_local {
RPL *RplTail;
unsigned char LocalRxBuffers[RPL_NUM][DEFAULT_PACKET_SIZE];
- struct pci_dev *pdev;
+ struct device *pdev;
int DataRate;
unsigned char ScbInUse;
unsigned short CMDqueue;
diff --git a/drivers/net/tokenring/tmspci.c b/drivers/net/tokenring/tmspci.c
index 2e18c0a4648..ab47c0547a3 100644
--- a/drivers/net/tokenring/tmspci.c
+++ b/drivers/net/tokenring/tmspci.c
@@ -100,7 +100,7 @@ static int __devinit tms_pci_attach(struct pci_dev *pdev, const struct pci_devic
unsigned int pci_irq_line;
unsigned long pci_ioaddr;
struct card_info *cardinfo = &card_info_table[ent->driver_data];
-
+
if (versionprinted++ == 0)
printk("%s", version);
@@ -143,7 +143,7 @@ static int __devinit tms_pci_attach(struct pci_dev *pdev, const struct pci_devic
printk(":%2.2x", dev->dev_addr[i]);
printk("\n");
- ret = tmsdev_init(dev, PCI_MAX_ADDRESS, pdev);
+ ret = tmsdev_init(dev, &pdev->dev);
if (ret) {
printk("%s: unable to get memory for dev->priv.\n", dev->name);
goto err_out_irq;
diff --git a/drivers/net/tulip/Kconfig b/drivers/net/tulip/Kconfig
index e2cdaf87620..8c9634a98c1 100644
--- a/drivers/net/tulip/Kconfig
+++ b/drivers/net/tulip/Kconfig
@@ -135,6 +135,18 @@ config DM9102
<file:Documentation/networking/net-modules.txt>. The module will
be called dmfe.
+config ULI526X
+ tristate "ULi M526x controller support"
+ depends on NET_TULIP && PCI
+ select CRC32
+ ---help---
+ This driver is for ULi M5261/M5263 10/100M Ethernet Controller
+ (<http://www.uli.com.tw/>).
+
+ To compile this driver as a module, choose M here and read
+ <file:Documentation/networking/net-modules.txt>. The module will
+ be called uli526x.
+
config PCMCIA_XIRCOM
tristate "Xircom CardBus support (new driver)"
depends on NET_TULIP && CARDBUS
diff --git a/drivers/net/tulip/Makefile b/drivers/net/tulip/Makefile
index 8bb9b468397..451090d6fcc 100644
--- a/drivers/net/tulip/Makefile
+++ b/drivers/net/tulip/Makefile
@@ -9,6 +9,7 @@ obj-$(CONFIG_WINBOND_840) += winbond-840.o
obj-$(CONFIG_DE2104X) += de2104x.o
obj-$(CONFIG_TULIP) += tulip.o
obj-$(CONFIG_DE4X5) += de4x5.o
+obj-$(CONFIG_ULI526X) += uli526x.o
# Declare multi-part drivers.
diff --git a/drivers/net/tulip/media.c b/drivers/net/tulip/media.c
index e26c31f944b..f53396fe79c 100644
--- a/drivers/net/tulip/media.c
+++ b/drivers/net/tulip/media.c
@@ -81,25 +81,6 @@ int tulip_mdio_read(struct net_device *dev, int phy_id, int location)
return retval & 0xffff;
}
- if(tp->chip_id == ULI526X && tp->revision >= 0x40) {
- int value;
- int i = 1000;
-
- value = ioread32(ioaddr + CSR9);
- iowrite32(value & 0xFFEFFFFF, ioaddr + CSR9);
-
- value = (phy_id << 21) | (location << 16) | 0x08000000;
- iowrite32(value, ioaddr + CSR10);
-
- while(--i > 0) {
- mdio_delay();
- if(ioread32(ioaddr + CSR10) & 0x10000000)
- break;
- }
- retval = ioread32(ioaddr + CSR10);
- spin_unlock_irqrestore(&tp->mii_lock, flags);
- return retval & 0xFFFF;
- }
/* Establish sync by sending at least 32 logic ones. */
for (i = 32; i >= 0; i--) {
iowrite32(MDIO_ENB | MDIO_DATA_WRITE1, mdio_addr);
@@ -159,23 +140,6 @@ void tulip_mdio_write(struct net_device *dev, int phy_id, int location, int val)
spin_unlock_irqrestore(&tp->mii_lock, flags);
return;
}
- if (tp->chip_id == ULI526X && tp->revision >= 0x40) {
- int value;
- int i = 1000;
-
- value = ioread32(ioaddr + CSR9);
- iowrite32(value & 0xFFEFFFFF, ioaddr + CSR9);
-
- value = (phy_id << 21) | (location << 16) | 0x04000000 | (val & 0xFFFF);
- iowrite32(value, ioaddr + CSR10);
-
- while(--i > 0) {
- if (ioread32(ioaddr + CSR10) & 0x10000000)
- break;
- }
- spin_unlock_irqrestore(&tp->mii_lock, flags);
- return;
- }
/* Establish sync by sending 32 logic ones. */
for (i = 32; i >= 0; i--) {
diff --git a/drivers/net/tulip/timer.c b/drivers/net/tulip/timer.c
index 69156828355..e058a9fbfe8 100644
--- a/drivers/net/tulip/timer.c
+++ b/drivers/net/tulip/timer.c
@@ -39,7 +39,6 @@ void tulip_timer(unsigned long data)
case MX98713:
case COMPEX9881:
case DM910X:
- case ULI526X:
default: {
struct medialeaf *mleaf;
unsigned char *p;
diff --git a/drivers/net/tulip/tulip.h b/drivers/net/tulip/tulip.h
index 20346d847d9..05d2d96f7be 100644
--- a/drivers/net/tulip/tulip.h
+++ b/drivers/net/tulip/tulip.h
@@ -88,7 +88,6 @@ enum chips {
I21145,
DM910X,
CONEXANT,
- ULI526X
};
@@ -482,11 +481,8 @@ static inline void tulip_stop_rxtx(struct tulip_private *tp)
static inline void tulip_restart_rxtx(struct tulip_private *tp)
{
- if(!(tp->chip_id == ULI526X &&
- (tp->revision == 0x40 || tp->revision == 0x50))) {
- tulip_stop_rxtx(tp);
- udelay(5);
- }
+ tulip_stop_rxtx(tp);
+ udelay(5);
tulip_start_rxtx(tp);
}
diff --git a/drivers/net/tulip/tulip_core.c b/drivers/net/tulip/tulip_core.c
index d45d8f56e5b..05da5bea564 100644
--- a/drivers/net/tulip/tulip_core.c
+++ b/drivers/net/tulip/tulip_core.c
@@ -199,9 +199,6 @@ struct tulip_chip_table tulip_tbl[] = {
{ "Conexant LANfinity", 256, 0x0001ebef,
HAS_MII | HAS_ACPI, tulip_timer },
- /* ULi526X */
- { "ULi M5261/M5263", 128, 0x0001ebef,
- HAS_MII | HAS_MEDIA_TABLE | CSR12_IN_SROM | HAS_ACPI, tulip_timer },
};
@@ -239,8 +236,6 @@ static struct pci_device_id tulip_pci_tbl[] = {
{ 0x1737, 0xAB09, PCI_ANY_ID, PCI_ANY_ID, 0, 0, COMET },
{ 0x1737, 0xAB08, PCI_ANY_ID, PCI_ANY_ID, 0, 0, COMET },
{ 0x17B3, 0xAB08, PCI_ANY_ID, PCI_ANY_ID, 0, 0, COMET },
- { 0x10b9, 0x5261, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ULI526X }, /* ALi 1563 integrated ethernet */
- { 0x10b9, 0x5263, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ULI526X }, /* ALi 1563 integrated ethernet */
{ 0x10b7, 0x9300, PCI_ANY_ID, PCI_ANY_ID, 0, 0, COMET }, /* 3Com 3CSOHO100B-TX */
{ 0x14ea, 0xab08, PCI_ANY_ID, PCI_ANY_ID, 0, 0, COMET }, /* Planex FNW-3602-TX */
{ } /* terminate list */
@@ -522,7 +517,7 @@ static void tulip_tx_timeout(struct net_device *dev)
dev->name);
} else if (tp->chip_id == DC21140 || tp->chip_id == DC21142
|| tp->chip_id == MX98713 || tp->chip_id == COMPEX9881
- || tp->chip_id == DM910X || tp->chip_id == ULI526X) {
+ || tp->chip_id == DM910X) {
printk(KERN_WARNING "%s: 21140 transmit timed out, status %8.8x, "
"SIA %8.8x %8.8x %8.8x %8.8x, resetting...\n",
dev->name, ioread32(ioaddr + CSR5), ioread32(ioaddr + CSR12),
@@ -1103,18 +1098,16 @@ static void set_rx_mode(struct net_device *dev)
entry = tp->cur_tx++ % TX_RING_SIZE;
if (entry != 0) {
- /* Avoid a chip errata by prefixing a dummy entry. Don't do
- this on the ULI526X as it triggers a different problem */
- if (!(tp->chip_id == ULI526X && (tp->revision == 0x40 || tp->revision == 0x50))) {
- tp->tx_buffers[entry].skb = NULL;
- tp->tx_buffers[entry].mapping = 0;
- tp->tx_ring[entry].length =
- (entry == TX_RING_SIZE-1) ? cpu_to_le32(DESC_RING_WRAP) : 0;
- tp->tx_ring[entry].buffer1 = 0;
- /* Must set DescOwned later to avoid race with chip */
- dummy = entry;
- entry = tp->cur_tx++ % TX_RING_SIZE;
- }
+ /* Avoid a chip errata by prefixing a dummy entry. */
+ tp->tx_buffers[entry].skb = NULL;
+ tp->tx_buffers[entry].mapping = 0;
+ tp->tx_ring[entry].length =
+ (entry == TX_RING_SIZE-1) ? cpu_to_le32(DESC_RING_WRAP) : 0;
+ tp->tx_ring[entry].buffer1 = 0;
+ /* Must set DescOwned later to avoid race with chip */
+ dummy = entry;
+ entry = tp->cur_tx++ % TX_RING_SIZE;
+
}
tp->tx_buffers[entry].skb = NULL;
@@ -1235,10 +1228,6 @@ static int tulip_uli_dm_quirk(struct pci_dev *pdev)
{
if (pdev->vendor == 0x1282 && pdev->device == 0x9102)
return 1;
- if (pdev->vendor == 0x10b9 && pdev->device == 0x5261)
- return 1;
- if (pdev->vendor == 0x10b9 && pdev->device == 0x5263)
- return 1;
return 0;
}
@@ -1680,7 +1669,6 @@ static int __devinit tulip_init_one (struct pci_dev *pdev,
switch (chip_idx) {
case DC21140:
case DM910X:
- case ULI526X:
default:
if (tp->mtable)
iowrite32(tp->mtable->csr12dir | 0x100, ioaddr + CSR12);
diff --git a/drivers/net/tulip/uli526x.c b/drivers/net/tulip/uli526x.c
new file mode 100644
index 00000000000..5ae22b7bc5c
--- /dev/null
+++ b/drivers/net/tulip/uli526x.c
@@ -0,0 +1,1749 @@
+/*
+ This program is free software; you can redistribute it and/or
+ modify it under the terms of the GNU General Public License
+ as published by the Free Software Foundation; either version 2
+ of the License, or (at your option) any later version.
+
+ This program is distributed in the hope that it will be useful,
+ but WITHOUT ANY WARRANTY; without even the implied warranty of
+ MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ GNU General Public License for more details.
+
+
+*/
+
+#define DRV_NAME "uli526x"
+#define DRV_VERSION "0.9.3"
+#define DRV_RELDATE "2005-7-29"
+
+#include <linux/module.h>
+
+#include <linux/kernel.h>
+#include <linux/string.h>
+#include <linux/timer.h>
+#include <linux/ptrace.h>
+#include <linux/errno.h>
+#include <linux/ioport.h>
+#include <linux/slab.h>
+#include <linux/interrupt.h>
+#include <linux/pci.h>
+#include <linux/init.h>
+#include <linux/netdevice.h>
+#include <linux/etherdevice.h>
+#include <linux/ethtool.h>
+#include <linux/skbuff.h>
+#include <linux/delay.h>
+#include <linux/spinlock.h>
+
+#include <asm/processor.h>
+#include <asm/bitops.h>
+#include <asm/io.h>
+#include <asm/dma.h>
+#include <asm/uaccess.h>
+
+
+/* Board/System/Debug information/definition ---------------- */
+#define PCI_ULI5261_ID 0x526110B9 /* ULi M5261 ID*/
+#define PCI_ULI5263_ID 0x526310B9 /* ULi M5263 ID*/
+
+#define ULI526X_IO_SIZE 0x100
+#define TX_DESC_CNT 0x20 /* Allocated Tx descriptors */
+#define RX_DESC_CNT 0x30 /* Allocated Rx descriptors */
+#define TX_FREE_DESC_CNT (TX_DESC_CNT - 2) /* Max TX packet count */
+#define TX_WAKE_DESC_CNT (TX_DESC_CNT - 3) /* TX wakeup count */
+#define DESC_ALL_CNT (TX_DESC_CNT + RX_DESC_CNT)
+#define TX_BUF_ALLOC 0x600
+#define RX_ALLOC_SIZE 0x620
+#define ULI526X_RESET 1
+#define CR0_DEFAULT 0
+#define CR6_DEFAULT 0x22200000
+#define CR7_DEFAULT 0x180c1
+#define CR15_DEFAULT 0x06 /* TxJabber RxWatchdog */
+#define TDES0_ERR_MASK 0x4302 /* TXJT, LC, EC, FUE */
+#define MAX_PACKET_SIZE 1514
+#define ULI5261_MAX_MULTICAST 14
+#define RX_COPY_SIZE 100
+#define MAX_CHECK_PACKET 0x8000
+
+#define ULI526X_10MHF 0
+#define ULI526X_100MHF 1
+#define ULI526X_10MFD 4
+#define ULI526X_100MFD 5
+#define ULI526X_AUTO 8
+
+#define ULI526X_TXTH_72 0x400000 /* TX TH 72 byte */
+#define ULI526X_TXTH_96 0x404000 /* TX TH 96 byte */
+#define ULI526X_TXTH_128 0x0000 /* TX TH 128 byte */
+#define ULI526X_TXTH_256 0x4000 /* TX TH 256 byte */
+#define ULI526X_TXTH_512 0x8000 /* TX TH 512 byte */
+#define ULI526X_TXTH_1K 0xC000 /* TX TH 1K byte */
+
+#define ULI526X_TIMER_WUT (jiffies + HZ * 1)/* timer wakeup time : 1 second */
+#define ULI526X_TX_TIMEOUT ((16*HZ)/2) /* tx packet time-out time 8 s" */
+#define ULI526X_TX_KICK (4*HZ/2) /* tx packet Kick-out time 2 s" */
+
+#define ULI526X_DBUG(dbug_now, msg, value) if (uli526x_debug || (dbug_now)) printk(KERN_ERR DRV_NAME ": %s %lx\n", (msg), (long) (value))
+
+#define SHOW_MEDIA_TYPE(mode) printk(KERN_ERR DRV_NAME ": Change Speed to %sMhz %s duplex\n",mode & 1 ?"100":"10", mode & 4 ? "full":"half");
+
+
+/* CR9 definition: SROM/MII */
+#define CR9_SROM_READ 0x4800
+#define CR9_SRCS 0x1
+#define CR9_SRCLK 0x2
+#define CR9_CRDOUT 0x8
+#define SROM_DATA_0 0x0
+#define SROM_DATA_1 0x4
+#define PHY_DATA_1 0x20000
+#define PHY_DATA_0 0x00000
+#define MDCLKH 0x10000
+
+#define PHY_POWER_DOWN 0x800
+
+#define SROM_V41_CODE 0x14
+
+#define SROM_CLK_WRITE(data, ioaddr) \
+ outl(data|CR9_SROM_READ|CR9_SRCS,ioaddr); \
+ udelay(5); \
+ outl(data|CR9_SROM_READ|CR9_SRCS|CR9_SRCLK,ioaddr); \
+ udelay(5); \
+ outl(data|CR9_SROM_READ|CR9_SRCS,ioaddr); \
+ udelay(5);
+
+/* Structure/enum declaration ------------------------------- */
+struct tx_desc {
+ u32 tdes0, tdes1, tdes2, tdes3; /* Data for the card */
+ char *tx_buf_ptr; /* Data for us */
+ struct tx_desc *next_tx_desc;
+} __attribute__(( aligned(32) ));
+
+struct rx_desc {
+ u32 rdes0, rdes1, rdes2, rdes3; /* Data for the card */
+ struct sk_buff *rx_skb_ptr; /* Data for us */
+ struct rx_desc *next_rx_desc;
+} __attribute__(( aligned(32) ));
+
+struct uli526x_board_info {
+ u32 chip_id; /* Chip vendor/Device ID */
+ struct net_device *next_dev; /* next device */
+ struct pci_dev *pdev; /* PCI device */
+ spinlock_t lock;
+
+ long ioaddr; /* I/O base address */
+ u32 cr0_data;
+ u32 cr5_data;
+ u32 cr6_data;
+ u32 cr7_data;
+ u32 cr15_data;
+
+ /* pointer for memory physical address */
+ dma_addr_t buf_pool_dma_ptr; /* Tx buffer pool memory */
+ dma_addr_t buf_pool_dma_start; /* Tx buffer pool align dword */
+ dma_addr_t desc_pool_dma_ptr; /* descriptor pool memory */
+ dma_addr_t first_tx_desc_dma;
+ dma_addr_t first_rx_desc_dma;
+
+ /* descriptor pointer */
+ unsigned char *buf_pool_ptr; /* Tx buffer pool memory */
+ unsigned char *buf_pool_start; /* Tx buffer pool align dword */
+ unsigned char *desc_pool_ptr; /* descriptor pool memory */
+ struct tx_desc *first_tx_desc;
+ struct tx_desc *tx_insert_ptr;
+ struct tx_desc *tx_remove_ptr;
+ struct rx_desc *first_rx_desc;
+ struct rx_desc *rx_insert_ptr;
+ struct rx_desc *rx_ready_ptr; /* packet come pointer */
+ unsigned long tx_packet_cnt; /* transmitted packet count */
+ unsigned long rx_avail_cnt; /* available rx descriptor count */
+ unsigned long interval_rx_cnt; /* rx packet count a callback time */
+
+ u16 dbug_cnt;
+ u16 NIC_capability; /* NIC media capability */
+ u16 PHY_reg4; /* Saved Phyxcer register 4 value */
+
+ u8 media_mode; /* user specify media mode */
+ u8 op_mode; /* real work media mode */
+ u8 phy_addr;
+ u8 link_failed; /* Ever link failed */
+ u8 wait_reset; /* Hardware failed, need to reset */
+ struct timer_list timer;
+
+ /* System defined statistic counter */
+ struct net_device_stats stats;
+
+ /* Driver defined statistic counter */
+ unsigned long tx_fifo_underrun;
+ unsigned long tx_loss_carrier;
+ unsigned long tx_no_carrier;
+ unsigned long tx_late_collision;
+ unsigned long tx_excessive_collision;
+ unsigned long tx_jabber_timeout;
+ unsigned long reset_count;
+ unsigned long reset_cr8;
+ unsigned long reset_fatal;
+ unsigned long reset_TXtimeout;
+
+ /* NIC SROM data */
+ unsigned char srom[128];
+ u8 init;
+};
+
+enum uli526x_offsets {
+ DCR0 = 0x00, DCR1 = 0x08, DCR2 = 0x10, DCR3 = 0x18, DCR4 = 0x20,
+ DCR5 = 0x28, DCR6 = 0x30, DCR7 = 0x38, DCR8 = 0x40, DCR9 = 0x48,
+ DCR10 = 0x50, DCR11 = 0x58, DCR12 = 0x60, DCR13 = 0x68, DCR14 = 0x70,
+ DCR15 = 0x78
+};
+
+enum uli526x_CR6_bits {
+ CR6_RXSC = 0x2, CR6_PBF = 0x8, CR6_PM = 0x40, CR6_PAM = 0x80,
+ CR6_FDM = 0x200, CR6_TXSC = 0x2000, CR6_STI = 0x100000,
+ CR6_SFT = 0x200000, CR6_RXA = 0x40000000, CR6_NO_PURGE = 0x20000000
+};
+
+/* Global variable declaration ----------------------------- */
+static int __devinitdata printed_version;
+static char version[] __devinitdata =
+ KERN_INFO DRV_NAME ": ULi M5261/M5263 net driver, version "
+ DRV_VERSION " (" DRV_RELDATE ")\n";
+
+static int uli526x_debug;
+static unsigned char uli526x_media_mode = ULI526X_AUTO;
+static u32 uli526x_cr6_user_set;
+
+/* For module input parameter */
+static int debug;
+static u32 cr6set;
+static unsigned char mode = 8;
+
+/* function declaration ------------------------------------- */
+static int uli526x_open(struct net_device *);
+static int uli526x_start_xmit(struct sk_buff *, struct net_device *);
+static int uli526x_stop(struct net_device *);
+static struct net_device_stats * uli526x_get_stats(struct net_device *);
+static void uli526x_set_filter_mode(struct net_device *);
+static struct ethtool_ops netdev_ethtool_ops;
+static u16 read_srom_word(long, int);
+static irqreturn_t uli526x_interrupt(int, void *, struct pt_regs *);
+static void uli526x_descriptor_init(struct uli526x_board_info *, unsigned long);
+static void allocate_rx_buffer(struct uli526x_board_info *);
+static void update_cr6(u32, unsigned long);
+static void send_filter_frame(struct net_device *, int);
+static u16 phy_read(unsigned long, u8, u8, u32);
+static u16 phy_readby_cr10(unsigned long, u8, u8);
+static void phy_write(unsigned long, u8, u8, u16, u32);
+static void phy_writeby_cr10(unsigned long, u8, u8, u16);
+static void phy_write_1bit(unsigned long, u32, u32);
+static u16 phy_read_1bit(unsigned long, u32);
+static u8 uli526x_sense_speed(struct uli526x_board_info *);
+static void uli526x_process_mode(struct uli526x_board_info *);
+static void uli526x_timer(unsigned long);
+static void uli526x_rx_packet(struct net_device *, struct uli526x_board_info *);
+static void uli526x_free_tx_pkt(struct net_device *, struct uli526x_board_info *);
+static void uli526x_reuse_skb(struct uli526x_board_info *, struct sk_buff *);
+static void uli526x_dynamic_reset(struct net_device *);
+static void uli526x_free_rxbuffer(struct uli526x_board_info *);
+static void uli526x_init(struct net_device *);
+static void uli526x_set_phyxcer(struct uli526x_board_info *);
+
+/* ULI526X network board routine ---------------------------- */
+
+/*
+ * Search ULI526X board, allocate space and register it
+ */
+
+static int __devinit uli526x_init_one (struct pci_dev *pdev,
+ const struct pci_device_id *ent)
+{
+ struct uli526x_board_info *db; /* board information structure */
+ struct net_device *dev;
+ int i, err;
+
+ ULI526X_DBUG(0, "uli526x_init_one()", 0);
+
+ if (!printed_version++)
+ printk(version);
+
+ /* Init network device */
+ dev = alloc_etherdev(sizeof(*db));
+ if (dev == NULL)
+ return -ENOMEM;
+ SET_MODULE_OWNER(dev);
+ SET_NETDEV_DEV(dev, &pdev->dev);
+
+ if (pci_set_dma_mask(pdev, DMA_32BIT_MASK)) {
+ printk(KERN_WARNING DRV_NAME ": 32-bit PCI DMA not available.\n");
+ err = -ENODEV;
+ goto err_out_free;
+ }
+
+ /* Enable Master/IO access, Disable memory access */
+ err = pci_enable_device(pdev);
+ if (err)
+ goto err_out_free;
+
+ if (!pci_resource_start(pdev, 0)) {
+ printk(KERN_ERR DRV_NAME ": I/O base is zero\n");
+ err = -ENODEV;
+ goto err_out_disable;
+ }
+
+ if (pci_resource_len(pdev, 0) < (ULI526X_IO_SIZE) ) {
+ printk(KERN_ERR DRV_NAME ": Allocated I/O size too small\n");
+ err = -ENODEV;
+ goto err_out_disable;
+ }
+
+ if (pci_request_regions(pdev, DRV_NAME)) {
+ printk(KERN_ERR DRV_NAME ": Failed to request PCI regions\n");
+ err = -ENODEV;
+ goto err_out_disable;
+ }
+
+ /* Init system & device */
+ db = netdev_priv(dev);
+
+ /* Allocate Tx/Rx descriptor memory */
+ db->desc_pool_ptr = pci_alloc_consistent(pdev, sizeof(struct tx_desc) * DESC_ALL_CNT + 0x20, &db->desc_pool_dma_ptr);
+ if(db->desc_pool_ptr == NULL)
+ {
+ err = -ENOMEM;
+ goto err_out_nomem;
+ }
+ db->buf_pool_ptr = pci_alloc_consistent(pdev, TX_BUF_ALLOC * TX_DESC_CNT + 4, &db->buf_pool_dma_ptr);
+ if(db->buf_pool_ptr == NULL)
+ {
+ err = -ENOMEM;
+ goto err_out_nomem;
+ }
+
+ db->first_tx_desc = (struct tx_desc *) db->desc_pool_ptr;
+ db->first_tx_desc_dma = db->desc_pool_dma_ptr;
+ db->buf_pool_start = db->buf_pool_ptr;
+ db->buf_pool_dma_start = db->buf_pool_dma_ptr;
+
+ db->chip_id = ent->driver_data;
+ db->ioaddr = pci_resource_start(pdev, 0);
+
+ db->pdev = pdev;
+ db->init = 1;
+
+ dev->base_addr = db->ioaddr;
+ dev->irq = pdev->irq;
+ pci_set_drvdata(pdev, dev);
+
+ /* Register some necessary functions */
+ dev->open = &uli526x_open;
+ dev->hard_start_xmit = &uli526x_start_xmit;
+ dev->stop = &uli526x_stop;
+ dev->get_stats = &uli526x_get_stats;
+ dev->set_multicast_list = &uli526x_set_filter_mode;
+ dev->ethtool_ops = &netdev_ethtool_ops;
+ spin_lock_init(&db->lock);
+
+
+ /* read 64 word srom data */
+ for (i = 0; i < 64; i++)
+ ((u16 *) db->srom)[i] = cpu_to_le16(read_srom_word(db->ioaddr, i));
+
+ /* Set Node address */
+ if(((u16 *) db->srom)[0] == 0xffff || ((u16 *) db->srom)[0] == 0) /* SROM absent, so read MAC address from ID Table */
+ {
+ outl(0x10000, db->ioaddr + DCR0); //Diagnosis mode
+ outl(0x1c0, db->ioaddr + DCR13); //Reset dianostic pointer port
+ outl(0, db->ioaddr + DCR14); //Clear reset port
+ outl(0x10, db->ioaddr + DCR14); //Reset ID Table pointer
+ outl(0, db->ioaddr + DCR14); //Clear reset port
+ outl(0, db->ioaddr + DCR13); //Clear CR13
+ outl(0x1b0, db->ioaddr + DCR13); //Select ID Table access port
+ //Read MAC address from CR14
+ for (i = 0; i < 6; i++)
+ dev->dev_addr[i] = inl(db->ioaddr + DCR14);
+ //Read end
+ outl(0, db->ioaddr + DCR13); //Clear CR13
+ outl(0, db->ioaddr + DCR0); //Clear CR0
+ udelay(10);
+ }
+ else /*Exist SROM*/
+ {
+ for (i = 0; i < 6; i++)
+ dev->dev_addr[i] = db->srom[20 + i];
+ }
+ err = register_netdev (dev);
+ if (err)
+ goto err_out_res;
+
+ printk(KERN_INFO "%s: ULi M%04lx at pci%s,",dev->name,ent->driver_data >> 16,pci_name(pdev));
+
+ for (i = 0; i < 6; i++)
+ printk("%c%02x", i ? ':' : ' ', dev->dev_addr[i]);
+ printk(", irq %d.\n", dev->irq);
+
+ pci_set_master(pdev);
+
+ return 0;
+
+err_out_res:
+ pci_release_regions(pdev);
+err_out_nomem:
+ if(db->desc_pool_ptr)
+ pci_free_consistent(pdev, sizeof(struct tx_desc) * DESC_ALL_CNT + 0x20,
+ db->desc_pool_ptr, db->desc_pool_dma_ptr);
+
+ if(db->buf_pool_ptr != NULL)
+ pci_free_consistent(pdev, TX_BUF_ALLOC * TX_DESC_CNT + 4,
+ db->buf_pool_ptr, db->buf_pool_dma_ptr);
+err_out_disable:
+ pci_disable_device(pdev);
+err_out_free:
+ pci_set_drvdata(pdev, NULL);
+ free_netdev(dev);
+
+ return err;
+}
+
+
+static void __devexit uli526x_remove_one (struct pci_dev *pdev)
+{
+ struct net_device *dev = pci_get_drvdata(pdev);
+ struct uli526x_board_info *db = netdev_priv(dev);
+
+ ULI526X_DBUG(0, "uli526x_remove_one()", 0);
+
+ pci_free_consistent(db->pdev, sizeof(struct tx_desc) *
+ DESC_ALL_CNT + 0x20, db->desc_pool_ptr,
+ db->desc_pool_dma_ptr);
+ pci_free_consistent(db->pdev, TX_BUF_ALLOC * TX_DESC_CNT + 4,
+ db->buf_pool_ptr, db->buf_pool_dma_ptr);
+ unregister_netdev(dev);
+ pci_release_regions(pdev);
+ free_netdev(dev); /* free board information */
+ pci_set_drvdata(pdev, NULL);
+ pci_disable_device(pdev);
+ ULI526X_DBUG(0, "uli526x_remove_one() exit", 0);
+}
+
+
+/*
+ * Open the interface.
+ * The interface is opened whenever "ifconfig" activates it.
+ */
+
+static int uli526x_open(struct net_device *dev)
+{
+ int ret;
+ struct uli526x_board_info *db = netdev_priv(dev);
+
+ ULI526X_DBUG(0, "uli526x_open", 0);
+
+ ret = request_irq(dev->irq, &uli526x_interrupt, SA_SHIRQ, dev->name, dev);
+ if (ret)
+ return ret;
+
+ /* system variable init */
+ db->cr6_data = CR6_DEFAULT | uli526x_cr6_user_set;
+ db->tx_packet_cnt = 0;
+ db->rx_avail_cnt = 0;
+ db->link_failed = 1;
+ netif_carrier_off(dev);
+ db->wait_reset = 0;
+
+ db->NIC_capability = 0xf; /* All capability*/
+ db->PHY_reg4 = 0x1e0;
+
+ /* CR6 operation mode decision */
+ db->cr6_data |= ULI526X_TXTH_256;
+ db->cr0_data = CR0_DEFAULT;
+
+ /* Initialize ULI526X board */
+ uli526x_init(dev);
+
+ /* Active System Interface */
+ netif_wake_queue(dev);
+
+ /* set and active a timer process */
+ init_timer(&db->timer);
+ db->timer.expires = ULI526X_TIMER_WUT + HZ * 2;
+ db->timer.data = (unsigned long)dev;
+ db->timer.function = &uli526x_timer;
+ add_timer(&db->timer);
+
+ return 0;
+}
+
+
+/* Initialize ULI526X board
+ * Reset ULI526X board
+ * Initialize TX/Rx descriptor chain structure
+ * Send the set-up frame
+ * Enable Tx/Rx machine
+ */
+
+static void uli526x_init(struct net_device *dev)
+{
+ struct uli526x_board_info *db = netdev_priv(dev);
+ unsigned long ioaddr = db->ioaddr;
+ u8 phy_tmp;
+ u16 phy_value;
+ u16 phy_reg_reset;
+
+ ULI526X_DBUG(0, "uli526x_init()", 0);
+
+ /* Reset M526x MAC controller */
+ outl(ULI526X_RESET, ioaddr + DCR0); /* RESET MAC */
+ udelay(100);
+ outl(db->cr0_data, ioaddr + DCR0);
+ udelay(5);
+
+ /* Phy addr : In some boards,M5261/M5263 phy address != 1 */
+ db->phy_addr = 1;
+ for(phy_tmp=0;phy_tmp<32;phy_tmp++)
+ {
+ phy_value=phy_read(db->ioaddr,phy_tmp,3,db->chip_id);//peer add
+ if(phy_value != 0xffff&&phy_value!=0)
+ {
+ db->phy_addr = phy_tmp;
+ break;
+ }
+ }
+ if(phy_tmp == 32)
+ printk(KERN_WARNING "Can not find the phy address!!!");
+ /* Parser SROM and media mode */
+ db->media_mode = uli526x_media_mode;
+
+ /* Phyxcer capability setting */
+ phy_reg_reset = phy_read(db->ioaddr, db->phy_addr, 0, db->chip_id);
+ phy_reg_reset = (phy_reg_reset | 0x8000);
+ phy_write(db->ioaddr, db->phy_addr, 0, phy_reg_reset, db->chip_id);
+ udelay(500);
+
+ /* Process Phyxcer Media Mode */
+ uli526x_set_phyxcer(db);
+
+ /* Media Mode Process */
+ if ( !(db->media_mode & ULI526X_AUTO) )
+ db->op_mode = db->media_mode; /* Force Mode */
+
+ /* Initialize Transmit/Receive decriptor and CR3/4 */
+ uli526x_descriptor_init(db, ioaddr);
+
+ /* Init CR6 to program M526X operation */
+ update_cr6(db->cr6_data, ioaddr);
+
+ /* Send setup frame */
+ send_filter_frame(dev, dev->mc_count); /* M5261/M5263 */
+
+ /* Init CR7, interrupt active bit */
+ db->cr7_data = CR7_DEFAULT;
+ outl(db->cr7_data, ioaddr + DCR7);
+
+ /* Init CR15, Tx jabber and Rx watchdog timer */
+ outl(db->cr15_data, ioaddr + DCR15);
+
+ /* Enable ULI526X Tx/Rx function */
+ db->cr6_data |= CR6_RXSC | CR6_TXSC;
+ update_cr6(db->cr6_data, ioaddr);
+}
+
+
+/*
+ * Hardware start transmission.
+ * Send a packet to media from the upper layer.
+ */
+
+static int uli526x_start_xmit(struct sk_buff *skb, struct net_device *dev)
+{
+ struct uli526x_board_info *db = netdev_priv(dev);
+ struct tx_desc *txptr;
+ unsigned long flags;
+
+ ULI526X_DBUG(0, "uli526x_start_xmit", 0);
+
+ /* Resource flag check */
+ netif_stop_queue(dev);
+
+ /* Too large packet check */
+ if (skb->len > MAX_PACKET_SIZE) {
+ printk(KERN_ERR DRV_NAME ": big packet = %d\n", (u16)skb->len);
+ dev_kfree_skb(skb);
+ return 0;
+ }
+
+ spin_lock_irqsave(&db->lock, flags);
+
+ /* No Tx resource check, it never happen nromally */
+ if (db->tx_packet_cnt >= TX_FREE_DESC_CNT) {
+ spin_unlock_irqrestore(&db->lock, flags);
+ printk(KERN_ERR DRV_NAME ": No Tx resource %ld\n", db->tx_packet_cnt);
+ return 1;
+ }
+
+ /* Disable NIC interrupt */
+ outl(0, dev->base_addr + DCR7);
+
+ /* transmit this packet */
+ txptr = db->tx_insert_ptr;
+ memcpy(txptr->tx_buf_ptr, skb->data, skb->len);
+ txptr->tdes1 = cpu_to_le32(0xe1000000 | skb->len);
+
+ /* Point to next transmit free descriptor */
+ db->tx_insert_ptr = txptr->next_tx_desc;
+
+ /* Transmit Packet Process */
+ if ( (db->tx_packet_cnt < TX_DESC_CNT) ) {
+ txptr->tdes0 = cpu_to_le32(0x80000000); /* Set owner bit */
+ db->tx_packet_cnt++; /* Ready to send */
+ outl(0x1, dev->base_addr + DCR1); /* Issue Tx polling */
+ dev->trans_start = jiffies; /* saved time stamp */
+ }
+
+ /* Tx resource check */
+ if ( db->tx_packet_cnt < TX_FREE_DESC_CNT )
+ netif_wake_queue(dev);
+
+ /* Restore CR7 to enable interrupt */
+ spin_unlock_irqrestore(&db->lock, flags);
+ outl(db->cr7_data, dev->base_addr + DCR7);
+
+ /* free this SKB */
+ dev_kfree_skb(skb);
+
+ return 0;
+}
+
+
+/*
+ * Stop the interface.
+ * The interface is stopped when it is brought.
+ */
+
+static int uli526x_stop(struct net_device *dev)
+{
+ struct uli526x_board_info *db = netdev_priv(dev);
+ unsigned long ioaddr = dev->base_addr;
+
+ ULI526X_DBUG(0, "uli526x_stop", 0);
+
+ /* disable system */
+ netif_stop_queue(dev);
+
+ /* deleted timer */
+ del_timer_sync(&db->timer);
+
+ /* Reset & stop ULI526X board */
+ outl(ULI526X_RESET, ioaddr + DCR0);
+ udelay(5);
+ phy_write(db->ioaddr, db->phy_addr, 0, 0x8000, db->chip_id);
+
+ /* free interrupt */
+ free_irq(dev->irq, dev);
+
+ /* free allocated rx buffer */
+ uli526x_free_rxbuffer(db);
+
+#if 0
+ /* show statistic counter */
+ printk(DRV_NAME ": FU:%lx EC:%lx LC:%lx NC:%lx LOC:%lx TXJT:%lx RESET:%lx RCR8:%lx FAL:%lx TT:%lx\n",
+ db->tx_fifo_underrun, db->tx_excessive_collision,
+ db->tx_late_collision, db->tx_no_carrier, db->tx_loss_carrier,
+ db->tx_jabber_timeout, db->reset_count, db->reset_cr8,
+ db->reset_fatal, db->reset_TXtimeout);
+#endif
+
+ return 0;
+}
+
+
+/*
+ * M5261/M5263 insterrupt handler
+ * receive the packet to upper layer, free the transmitted packet
+ */
+
+static irqreturn_t uli526x_interrupt(int irq, void *dev_id, struct pt_regs *regs)
+{
+ struct net_device *dev = dev_id;
+ struct uli526x_board_info *db = netdev_priv(dev);
+ unsigned long ioaddr = dev->base_addr;
+ unsigned long flags;
+
+ if (!dev) {
+ ULI526X_DBUG(1, "uli526x_interrupt() without DEVICE arg", 0);
+ return IRQ_NONE;
+ }
+
+ spin_lock_irqsave(&db->lock, flags);
+ outl(0, ioaddr + DCR7);
+
+ /* Got ULI526X status */
+ db->cr5_data = inl(ioaddr + DCR5);
+ outl(db->cr5_data, ioaddr + DCR5);
+ if ( !(db->cr5_data & 0x180c1) ) {
+ spin_unlock_irqrestore(&db->lock, flags);
+ outl(db->cr7_data, ioaddr + DCR7);
+ return IRQ_HANDLED;
+ }
+
+ /* Check system status */
+ if (db->cr5_data & 0x2000) {
+ /* system bus error happen */
+ ULI526X_DBUG(1, "System bus error happen. CR5=", db->cr5_data);
+ db->reset_fatal++;
+ db->wait_reset = 1; /* Need to RESET */
+ spin_unlock_irqrestore(&db->lock, flags);
+ return IRQ_HANDLED;
+ }
+
+ /* Received the coming packet */
+ if ( (db->cr5_data & 0x40) && db->rx_avail_cnt )
+ uli526x_rx_packet(dev, db);
+
+ /* reallocate rx descriptor buffer */
+ if (db->rx_avail_cnt<RX_DESC_CNT)
+ allocate_rx_buffer(db);
+
+ /* Free the transmitted descriptor */
+ if ( db->cr5_data & 0x01)
+ uli526x_free_tx_pkt(dev, db);
+
+ /* Restore CR7 to enable interrupt mask */
+ outl(db->cr7_data, ioaddr + DCR7);
+
+ spin_unlock_irqrestore(&db->lock, flags);
+ return IRQ_HANDLED;
+}
+
+
+/*
+ * Free TX resource after TX complete
+ */
+
+static void uli526x_free_tx_pkt(struct net_device *dev, struct uli526x_board_info * db)
+{
+ struct tx_desc *txptr;
+ u32 tdes0;
+
+ txptr = db->tx_remove_ptr;
+ while(db->tx_packet_cnt) {
+ tdes0 = le32_to_cpu(txptr->tdes0);
+ /* printk(DRV_NAME ": tdes0=%x\n", tdes0); */
+ if (tdes0 & 0x80000000)
+ break;
+
+ /* A packet sent completed */
+ db->tx_packet_cnt--;
+ db->stats.tx_packets++;
+
+ /* Transmit statistic counter */
+ if ( tdes0 != 0x7fffffff ) {
+ /* printk(DRV_NAME ": tdes0=%x\n", tdes0); */
+ db->stats.collisions += (tdes0 >> 3) & 0xf;
+ db->stats.tx_bytes += le32_to_cpu(txptr->tdes1) & 0x7ff;
+ if (tdes0 & TDES0_ERR_MASK) {
+ db->stats.tx_errors++;
+ if (tdes0 & 0x0002) { /* UnderRun */
+ db->tx_fifo_underrun++;
+ if ( !(db->cr6_data & CR6_SFT) ) {
+ db->cr6_data = db->cr6_data | CR6_SFT;
+ update_cr6(db->cr6_data, db->ioaddr);
+ }
+ }
+ if (tdes0 & 0x0100)
+ db->tx_excessive_collision++;
+ if (tdes0 & 0x0200)
+ db->tx_late_collision++;
+ if (tdes0 & 0x0400)
+ db->tx_no_carrier++;
+ if (tdes0 & 0x0800)
+ db->tx_loss_carrier++;
+ if (tdes0 & 0x4000)
+ db->tx_jabber_timeout++;
+ }
+ }
+
+ txptr = txptr->next_tx_desc;
+ }/* End of while */
+
+ /* Update TX remove pointer to next */
+ db->tx_remove_ptr = txptr;
+
+ /* Resource available check */
+ if ( db->tx_packet_cnt < TX_WAKE_DESC_CNT )
+ netif_wake_queue(dev); /* Active upper layer, send again */
+}
+
+
+/*
+ * Receive the come packet and pass to upper layer
+ */
+
+static void uli526x_rx_packet(struct net_device *dev, struct uli526x_board_info * db)
+{
+ struct rx_desc *rxptr;
+ struct sk_buff *skb;
+ int rxlen;
+ u32 rdes0;
+
+ rxptr = db->rx_ready_ptr;
+
+ while(db->rx_avail_cnt) {
+ rdes0 = le32_to_cpu(rxptr->rdes0);
+ if (rdes0 & 0x80000000) /* packet owner check */
+ {
+ break;
+ }
+
+ db->rx_avail_cnt--;
+ db->interval_rx_cnt++;
+
+ pci_unmap_single(db->pdev, le32_to_cpu(rxptr->rdes2), RX_ALLOC_SIZE, PCI_DMA_FROMDEVICE);
+ if ( (rdes0 & 0x300) != 0x300) {
+ /* A packet without First/Last flag */
+ /* reuse this SKB */
+ ULI526X_DBUG(0, "Reuse SK buffer, rdes0", rdes0);
+ uli526x_reuse_skb(db, rxptr->rx_skb_ptr);
+ } else {
+ /* A packet with First/Last flag */
+ rxlen = ( (rdes0 >> 16) & 0x3fff) - 4;
+
+ /* error summary bit check */
+ if (rdes0 & 0x8000) {
+ /* This is a error packet */
+ //printk(DRV_NAME ": rdes0: %lx\n", rdes0);
+ db->stats.rx_errors++;
+ if (rdes0 & 1)
+ db->stats.rx_fifo_errors++;
+ if (rdes0 & 2)
+ db->stats.rx_crc_errors++;
+ if (rdes0 & 0x80)
+ db->stats.rx_length_errors++;
+ }
+
+ if ( !(rdes0 & 0x8000) ||
+ ((db->cr6_data & CR6_PM) && (rxlen>6)) ) {
+ skb = rxptr->rx_skb_ptr;
+
+ /* Good packet, send to upper layer */
+ /* Shorst packet used new SKB */
+ if ( (rxlen < RX_COPY_SIZE) &&
+ ( (skb = dev_alloc_skb(rxlen + 2) )
+ != NULL) ) {
+ /* size less than COPY_SIZE, allocate a rxlen SKB */
+ skb->dev = dev;
+ skb_reserve(skb, 2); /* 16byte align */
+ memcpy(skb_put(skb, rxlen), rxptr->rx_skb_ptr->tail, rxlen);
+ uli526x_reuse_skb(db, rxptr->rx_skb_ptr);
+ } else {
+ skb->dev = dev;
+ skb_put(skb, rxlen);
+ }
+ skb->protocol = eth_type_trans(skb, dev);
+ netif_rx(skb);
+ dev->last_rx = jiffies;
+ db->stats.rx_packets++;
+ db->stats.rx_bytes += rxlen;
+
+ } else {
+ /* Reuse SKB buffer when the packet is error */
+ ULI526X_DBUG(0, "Reuse SK buffer, rdes0", rdes0);
+ uli526x_reuse_skb(db, rxptr->rx_skb_ptr);
+ }
+ }
+
+ rxptr = rxptr->next_rx_desc;
+ }
+
+ db->rx_ready_ptr = rxptr;
+}
+
+
+/*
+ * Get statistics from driver.
+ */
+
+static struct net_device_stats * uli526x_get_stats(struct net_device *dev)
+{
+ struct uli526x_board_info *db = netdev_priv(dev);
+
+ ULI526X_DBUG(0, "uli526x_get_stats", 0);
+ return &db->stats;
+}
+
+
+/*
+ * Set ULI526X multicast address
+ */
+
+static void uli526x_set_filter_mode(struct net_device * dev)
+{
+ struct uli526x_board_info *db = dev->priv;
+ unsigned long flags;
+
+ ULI526X_DBUG(0, "uli526x_set_filter_mode()", 0);
+ spin_lock_irqsave(&db->lock, flags);
+
+ if (dev->flags & IFF_PROMISC) {
+ ULI526X_DBUG(0, "Enable PROM Mode", 0);
+ db->cr6_data |= CR6_PM | CR6_PBF;
+ update_cr6(db->cr6_data, db->ioaddr);
+ spin_unlock_irqrestore(&db->lock, flags);
+ return;
+ }
+
+ if (dev->flags & IFF_ALLMULTI || dev->mc_count > ULI5261_MAX_MULTICAST) {
+ ULI526X_DBUG(0, "Pass all multicast address", dev->mc_count);
+ db->cr6_data &= ~(CR6_PM | CR6_PBF);
+ db->cr6_data |= CR6_PAM;
+ spin_unlock_irqrestore(&db->lock, flags);
+ return;
+ }
+
+ ULI526X_DBUG(0, "Set multicast address", dev->mc_count);
+ send_filter_frame(dev, dev->mc_count); /* M5261/M5263 */
+ spin_unlock_irqrestore(&db->lock, flags);
+}
+
+static void
+ULi_ethtool_gset(struct uli526x_board_info *db, struct ethtool_cmd *ecmd)
+{
+ ecmd->supported = (SUPPORTED_10baseT_Half |
+ SUPPORTED_10baseT_Full |
+ SUPPORTED_100baseT_Half |
+ SUPPORTED_100baseT_Full |
+ SUPPORTED_Autoneg |
+ SUPPORTED_MII);
+
+ ecmd->advertising = (ADVERTISED_10baseT_Half |
+ ADVERTISED_10baseT_Full |
+ ADVERTISED_100baseT_Half |
+ ADVERTISED_100baseT_Full |
+ ADVERTISED_Autoneg |
+ ADVERTISED_MII);
+
+
+ ecmd->port = PORT_MII;
+ ecmd->phy_address = db->phy_addr;
+
+ ecmd->transceiver = XCVR_EXTERNAL;
+
+ ecmd->speed = 10;
+ ecmd->duplex = DUPLEX_HALF;
+
+ if(db->op_mode==ULI526X_100MHF || db->op_mode==ULI526X_100MFD)
+ {
+ ecmd->speed = 100;
+ }
+ if(db->op_mode==ULI526X_10MFD || db->op_mode==ULI526X_100MFD)
+ {
+ ecmd->duplex = DUPLEX_FULL;
+ }
+ if(db->link_failed)
+ {
+ ecmd->speed = -1;
+ ecmd->duplex = -1;
+ }
+
+ if (db->media_mode & ULI526X_AUTO)
+ {
+ ecmd->autoneg = AUTONEG_ENABLE;
+ }
+}
+
+static void netdev_get_drvinfo(struct net_device *dev,
+ struct ethtool_drvinfo *info)
+{
+ struct uli526x_board_info *np = netdev_priv(dev);
+
+ strcpy(info->driver, DRV_NAME);
+ strcpy(info->version, DRV_VERSION);
+ if (np->pdev)
+ strcpy(info->bus_info, pci_name(np->pdev));
+ else
+ sprintf(info->bus_info, "EISA 0x%lx %d",
+ dev->base_addr, dev->irq);
+}
+
+static int netdev_get_settings(struct net_device *dev, struct ethtool_cmd *cmd) {
+ struct uli526x_board_info *np = netdev_priv(dev);
+
+ ULi_ethtool_gset(np, cmd);
+
+ return 0;
+}
+
+static u32 netdev_get_link(struct net_device *dev) {
+ struct uli526x_board_info *np = netdev_priv(dev);
+
+ if(np->link_failed)
+ return 0;
+ else
+ return 1;
+}
+
+static void uli526x_get_wol(struct net_device *dev, struct ethtool_wolinfo *wol)
+{
+ wol->supported = WAKE_PHY | WAKE_MAGIC;
+ wol->wolopts = 0;
+}
+
+static struct ethtool_ops netdev_ethtool_ops = {
+ .get_drvinfo = netdev_get_drvinfo,
+ .get_settings = netdev_get_settings,
+ .get_link = netdev_get_link,
+ .get_wol = uli526x_get_wol,
+};
+
+/*
+ * A periodic timer routine
+ * Dynamic media sense, allocate Rx buffer...
+ */
+
+static void uli526x_timer(unsigned long data)
+{
+ u32 tmp_cr8;
+ unsigned char tmp_cr12=0;
+ struct net_device *dev = (struct net_device *) data;
+ struct uli526x_board_info *db = netdev_priv(dev);
+ unsigned long flags;
+ u8 TmpSpeed=10;
+
+ //ULI526X_DBUG(0, "uli526x_timer()", 0);
+ spin_lock_irqsave(&db->lock, flags);
+
+
+ /* Dynamic reset ULI526X : system error or transmit time-out */
+ tmp_cr8 = inl(db->ioaddr + DCR8);
+ if ( (db->interval_rx_cnt==0) && (tmp_cr8) ) {
+ db->reset_cr8++;
+ db->wait_reset = 1;
+ }
+ db->interval_rx_cnt = 0;
+
+ /* TX polling kick monitor */
+ if ( db->tx_packet_cnt &&
+ time_after(jiffies, dev->trans_start + ULI526X_TX_KICK) ) {
+ outl(0x1, dev->base_addr + DCR1); // Tx polling again
+
+ // TX Timeout
+ if ( time_after(jiffies, dev->trans_start + ULI526X_TX_TIMEOUT) ) {
+ db->reset_TXtimeout++;
+ db->wait_reset = 1;
+ printk( "%s: Tx timeout - resetting\n",
+ dev->name);
+ }
+ }
+
+ if (db->wait_reset) {
+ ULI526X_DBUG(0, "Dynamic Reset device", db->tx_packet_cnt);
+ db->reset_count++;
+ uli526x_dynamic_reset(dev);
+ db->timer.expires = ULI526X_TIMER_WUT;
+ add_timer(&db->timer);
+ spin_unlock_irqrestore(&db->lock, flags);
+ return;
+ }
+
+ /* Link status check, Dynamic media type change */
+ if((phy_read(db->ioaddr, db->phy_addr, 5, db->chip_id) & 0x01e0)!=0)
+ tmp_cr12 = 3;
+
+ if ( !(tmp_cr12 & 0x3) && !db->link_failed ) {
+ /* Link Failed */
+ ULI526X_DBUG(0, "Link Failed", tmp_cr12);
+ netif_carrier_off(dev);
+ printk(KERN_INFO "uli526x: %s NIC Link is Down\n",dev->name);
+ db->link_failed = 1;
+
+ /* For Force 10/100M Half/Full mode: Enable Auto-Nego mode */
+ /* AUTO don't need */
+ if ( !(db->media_mode & 0x8) )
+ phy_write(db->ioaddr, db->phy_addr, 0, 0x1000, db->chip_id);
+
+ /* AUTO mode, if INT phyxcer link failed, select EXT device */
+ if (db->media_mode & ULI526X_AUTO) {
+ db->cr6_data&=~0x00000200; /* bit9=0, HD mode */
+ update_cr6(db->cr6_data, db->ioaddr);
+ }
+ } else
+ if ((tmp_cr12 & 0x3) && db->link_failed) {
+ ULI526X_DBUG(0, "Link link OK", tmp_cr12);
+ db->link_failed = 0;
+
+ /* Auto Sense Speed */
+ if ( (db->media_mode & ULI526X_AUTO) &&
+ uli526x_sense_speed(db) )
+ db->link_failed = 1;
+ uli526x_process_mode(db);
+
+ if(db->link_failed==0)
+ {
+ if(db->op_mode==ULI526X_100MHF || db->op_mode==ULI526X_100MFD)
+ {
+ TmpSpeed = 100;
+ }
+ if(db->op_mode==ULI526X_10MFD || db->op_mode==ULI526X_100MFD)
+ {
+ printk(KERN_INFO "uli526x: %s NIC Link is Up %d Mbps Full duplex\n",dev->name,TmpSpeed);
+ }
+ else
+ {
+ printk(KERN_INFO "uli526x: %s NIC Link is Up %d Mbps Half duplex\n",dev->name,TmpSpeed);
+ }
+ netif_carrier_on(dev);
+ }
+ /* SHOW_MEDIA_TYPE(db->op_mode); */
+ }
+ else if(!(tmp_cr12 & 0x3) && db->link_failed)
+ {
+ if(db->init==1)
+ {
+ printk(KERN_INFO "uli526x: %s NIC Link is Down\n",dev->name);
+ netif_carrier_off(dev);
+ }
+ }
+ db->init=0;
+
+ /* Timer active again */
+ db->timer.expires = ULI526X_TIMER_WUT;
+ add_timer(&db->timer);
+ spin_unlock_irqrestore(&db->lock, flags);
+}
+
+
+/*
+ * Dynamic reset the ULI526X board
+ * Stop ULI526X board
+ * Free Tx/Rx allocated memory
+ * Reset ULI526X board
+ * Re-initialize ULI526X board
+ */
+
+static void uli526x_dynamic_reset(struct net_device *dev)
+{
+ struct uli526x_board_info *db = netdev_priv(dev);
+
+ ULI526X_DBUG(0, "uli526x_dynamic_reset()", 0);
+
+ /* Sopt MAC controller */
+ db->cr6_data &= ~(CR6_RXSC | CR6_TXSC); /* Disable Tx/Rx */
+ update_cr6(db->cr6_data, dev->base_addr);
+ outl(0, dev->base_addr + DCR7); /* Disable Interrupt */
+ outl(inl(dev->base_addr + DCR5), dev->base_addr + DCR5);
+
+ /* Disable upper layer interface */
+ netif_stop_queue(dev);
+
+ /* Free Rx Allocate buffer */
+ uli526x_free_rxbuffer(db);
+
+ /* system variable init */
+ db->tx_packet_cnt = 0;
+ db->rx_avail_cnt = 0;
+ db->link_failed = 1;
+ db->init=1;
+ db->wait_reset = 0;
+
+ /* Re-initialize ULI526X board */
+ uli526x_init(dev);
+
+ /* Restart upper layer interface */
+ netif_wake_queue(dev);
+}
+
+
+/*
+ * free all allocated rx buffer
+ */
+
+static void uli526x_free_rxbuffer(struct uli526x_board_info * db)
+{
+ ULI526X_DBUG(0, "uli526x_free_rxbuffer()", 0);
+
+ /* free allocated rx buffer */
+ while (db->rx_avail_cnt) {
+ dev_kfree_skb(db->rx_ready_ptr->rx_skb_ptr);
+ db->rx_ready_ptr = db->rx_ready_ptr->next_rx_desc;
+ db->rx_avail_cnt--;
+ }
+}
+
+
+/*
+ * Reuse the SK buffer
+ */
+
+static void uli526x_reuse_skb(struct uli526x_board_info *db, struct sk_buff * skb)
+{
+ struct rx_desc *rxptr = db->rx_insert_ptr;
+
+ if (!(rxptr->rdes0 & cpu_to_le32(0x80000000))) {
+ rxptr->rx_skb_ptr = skb;
+ rxptr->rdes2 = cpu_to_le32( pci_map_single(db->pdev, skb->tail, RX_ALLOC_SIZE, PCI_DMA_FROMDEVICE) );
+ wmb();
+ rxptr->rdes0 = cpu_to_le32(0x80000000);
+ db->rx_avail_cnt++;
+ db->rx_insert_ptr = rxptr->next_rx_desc;
+ } else
+ ULI526X_DBUG(0, "SK Buffer reuse method error", db->rx_avail_cnt);
+}
+
+
+/*
+ * Initialize transmit/Receive descriptor
+ * Using Chain structure, and allocate Tx/Rx buffer
+ */
+
+static void uli526x_descriptor_init(struct uli526x_board_info *db, unsigned long ioaddr)
+{
+ struct tx_desc *tmp_tx;
+ struct rx_desc *tmp_rx;
+ unsigned char *tmp_buf;
+ dma_addr_t tmp_tx_dma, tmp_rx_dma;
+ dma_addr_t tmp_buf_dma;
+ int i;
+
+ ULI526X_DBUG(0, "uli526x_descriptor_init()", 0);
+
+ /* tx descriptor start pointer */
+ db->tx_insert_ptr = db->first_tx_desc;
+ db->tx_remove_ptr = db->first_tx_desc;
+ outl(db->first_tx_desc_dma, ioaddr + DCR4); /* TX DESC address */
+
+ /* rx descriptor start pointer */
+ db->first_rx_desc = (void *)db->first_tx_desc + sizeof(struct tx_desc) * TX_DESC_CNT;
+ db->first_rx_desc_dma = db->first_tx_desc_dma + sizeof(struct tx_desc) * TX_DESC_CNT;
+ db->rx_insert_ptr = db->first_rx_desc;
+ db->rx_ready_ptr = db->first_rx_desc;
+ outl(db->first_rx_desc_dma, ioaddr + DCR3); /* RX DESC address */
+
+ /* Init Transmit chain */
+ tmp_buf = db->buf_pool_start;
+ tmp_buf_dma = db->buf_pool_dma_start;
+ tmp_tx_dma = db->first_tx_desc_dma;
+ for (tmp_tx = db->first_tx_desc, i = 0; i < TX_DESC_CNT; i++, tmp_tx++) {
+ tmp_tx->tx_buf_ptr = tmp_buf;
+ tmp_tx->tdes0 = cpu_to_le32(0);
+ tmp_tx->tdes1 = cpu_to_le32(0x81000000); /* IC, chain */
+ tmp_tx->tdes2 = cpu_to_le32(tmp_buf_dma);
+ tmp_tx_dma += sizeof(struct tx_desc);
+ tmp_tx->tdes3 = cpu_to_le32(tmp_tx_dma);
+ tmp_tx->next_tx_desc = tmp_tx + 1;
+ tmp_buf = tmp_buf + TX_BUF_ALLOC;
+ tmp_buf_dma = tmp_buf_dma + TX_BUF_ALLOC;
+ }
+ (--tmp_tx)->tdes3 = cpu_to_le32(db->first_tx_desc_dma);
+ tmp_tx->next_tx_desc = db->first_tx_desc;
+
+ /* Init Receive descriptor chain */
+ tmp_rx_dma=db->first_rx_desc_dma;
+ for (tmp_rx = db->first_rx_desc, i = 0; i < RX_DESC_CNT; i++, tmp_rx++) {
+ tmp_rx->rdes0 = cpu_to_le32(0);
+ tmp_rx->rdes1 = cpu_to_le32(0x01000600);
+ tmp_rx_dma += sizeof(struct rx_desc);
+ tmp_rx->rdes3 = cpu_to_le32(tmp_rx_dma);
+ tmp_rx->next_rx_desc = tmp_rx + 1;
+ }
+ (--tmp_rx)->rdes3 = cpu_to_le32(db->first_rx_desc_dma);
+ tmp_rx->next_rx_desc = db->first_rx_desc;
+
+ /* pre-allocate Rx buffer */
+ allocate_rx_buffer(db);
+}
+
+
+/*
+ * Update CR6 value
+ * Firstly stop ULI526X, then written value and start
+ */
+
+static void update_cr6(u32 cr6_data, unsigned long ioaddr)
+{
+
+ outl(cr6_data, ioaddr + DCR6);
+ udelay(5);
+}
+
+
+/*
+ * Send a setup frame for M5261/M5263
+ * This setup frame initialize ULI526X address filter mode
+ */
+
+static void send_filter_frame(struct net_device *dev, int mc_cnt)
+{
+ struct uli526x_board_info *db = netdev_priv(dev);
+ struct dev_mc_list *mcptr;
+ struct tx_desc *txptr;
+ u16 * addrptr;
+ u32 * suptr;
+ int i;
+
+ ULI526X_DBUG(0, "send_filter_frame()", 0);
+
+ txptr = db->tx_insert_ptr;
+ suptr = (u32 *) txptr->tx_buf_ptr;
+
+ /* Node address */
+ addrptr = (u16 *) dev->dev_addr;
+ *suptr++ = addrptr[0];
+ *suptr++ = addrptr[1];
+ *suptr++ = addrptr[2];
+
+ /* broadcast address */
+ *suptr++ = 0xffff;
+ *suptr++ = 0xffff;
+ *suptr++ = 0xffff;
+
+ /* fit the multicast address */
+ for (mcptr = dev->mc_list, i = 0; i < mc_cnt; i++, mcptr = mcptr->next) {
+ addrptr = (u16 *) mcptr->dmi_addr;
+ *suptr++ = addrptr[0];
+ *suptr++ = addrptr[1];
+ *suptr++ = addrptr[2];
+ }
+
+ for (; i<14; i++) {
+ *suptr++ = 0xffff;
+ *suptr++ = 0xffff;
+ *suptr++ = 0xffff;
+ }
+
+ /* prepare the setup frame */
+ db->tx_insert_ptr = txptr->next_tx_desc;
+ txptr->tdes1 = cpu_to_le32(0x890000c0);
+
+ /* Resource Check and Send the setup packet */
+ if (db->tx_packet_cnt < TX_DESC_CNT) {
+ /* Resource Empty */
+ db->tx_packet_cnt++;
+ txptr->tdes0 = cpu_to_le32(0x80000000);
+ update_cr6(db->cr6_data | 0x2000, dev->base_addr);
+ outl(0x1, dev->base_addr + DCR1); /* Issue Tx polling */
+ update_cr6(db->cr6_data, dev->base_addr);
+ dev->trans_start = jiffies;
+ } else
+ printk(KERN_ERR DRV_NAME ": No Tx resource - Send_filter_frame!\n");
+}
+
+
+/*
+ * Allocate rx buffer,
+ * As possible as allocate maxiumn Rx buffer
+ */
+
+static void allocate_rx_buffer(struct uli526x_board_info *db)
+{
+ struct rx_desc *rxptr;
+ struct sk_buff *skb;
+
+ rxptr = db->rx_insert_ptr;
+
+ while(db->rx_avail_cnt < RX_DESC_CNT) {
+ if ( ( skb = dev_alloc_skb(RX_ALLOC_SIZE) ) == NULL )
+ break;
+ rxptr->rx_skb_ptr = skb; /* FIXME (?) */
+ rxptr->rdes2 = cpu_to_le32( pci_map_single(db->pdev, skb->tail, RX_ALLOC_SIZE, PCI_DMA_FROMDEVICE) );
+ wmb();
+ rxptr->rdes0 = cpu_to_le32(0x80000000);
+ rxptr = rxptr->next_rx_desc;
+ db->rx_avail_cnt++;
+ }
+
+ db->rx_insert_ptr = rxptr;
+}
+
+
+/*
+ * Read one word data from the serial ROM
+ */
+
+static u16 read_srom_word(long ioaddr, int offset)
+{
+ int i;
+ u16 srom_data = 0;
+ long cr9_ioaddr = ioaddr + DCR9;
+
+ outl(CR9_SROM_READ, cr9_ioaddr);
+ outl(CR9_SROM_READ | CR9_SRCS, cr9_ioaddr);
+
+ /* Send the Read Command 110b */
+ SROM_CLK_WRITE(SROM_DATA_1, cr9_ioaddr);
+ SROM_CLK_WRITE(SROM_DATA_1, cr9_ioaddr);
+ SROM_CLK_WRITE(SROM_DATA_0, cr9_ioaddr);
+
+ /* Send the offset */
+ for (i = 5; i >= 0; i--) {
+ srom_data = (offset & (1 << i)) ? SROM_DATA_1 : SROM_DATA_0;
+ SROM_CLK_WRITE(srom_data, cr9_ioaddr);
+ }
+
+ outl(CR9_SROM_READ | CR9_SRCS, cr9_ioaddr);
+
+ for (i = 16; i > 0; i--) {
+ outl(CR9_SROM_READ | CR9_SRCS | CR9_SRCLK, cr9_ioaddr);
+ udelay(5);
+ srom_data = (srom_data << 1) | ((inl(cr9_ioaddr) & CR9_CRDOUT) ? 1 : 0);
+ outl(CR9_SROM_READ | CR9_SRCS, cr9_ioaddr);
+ udelay(5);
+ }
+
+ outl(CR9_SROM_READ, cr9_ioaddr);
+ return srom_data;
+}
+
+
+/*
+ * Auto sense the media mode
+ */
+
+static u8 uli526x_sense_speed(struct uli526x_board_info * db)
+{
+ u8 ErrFlag = 0;
+ u16 phy_mode;
+
+ phy_mode = phy_read(db->ioaddr, db->phy_addr, 1, db->chip_id);
+ phy_mode = phy_read(db->ioaddr, db->phy_addr, 1, db->chip_id);
+
+ if ( (phy_mode & 0x24) == 0x24 ) {
+
+ phy_mode = ((phy_read(db->ioaddr, db->phy_addr, 5, db->chip_id) & 0x01e0)<<7);
+ if(phy_mode&0x8000)
+ phy_mode = 0x8000;
+ else if(phy_mode&0x4000)
+ phy_mode = 0x4000;
+ else if(phy_mode&0x2000)
+ phy_mode = 0x2000;
+ else
+ phy_mode = 0x1000;
+
+ /* printk(DRV_NAME ": Phy_mode %x ",phy_mode); */
+ switch (phy_mode) {
+ case 0x1000: db->op_mode = ULI526X_10MHF; break;
+ case 0x2000: db->op_mode = ULI526X_10MFD; break;
+ case 0x4000: db->op_mode = ULI526X_100MHF; break;
+ case 0x8000: db->op_mode = ULI526X_100MFD; break;
+ default: db->op_mode = ULI526X_10MHF; ErrFlag = 1; break;
+ }
+ } else {
+ db->op_mode = ULI526X_10MHF;
+ ULI526X_DBUG(0, "Link Failed :", phy_mode);
+ ErrFlag = 1;
+ }
+
+ return ErrFlag;
+}
+
+
+/*
+ * Set 10/100 phyxcer capability
+ * AUTO mode : phyxcer register4 is NIC capability
+ * Force mode: phyxcer register4 is the force media
+ */
+
+static void uli526x_set_phyxcer(struct uli526x_board_info *db)
+{
+ u16 phy_reg;
+
+ /* Phyxcer capability setting */
+ phy_reg = phy_read(db->ioaddr, db->phy_addr, 4, db->chip_id) & ~0x01e0;
+
+ if (db->media_mode & ULI526X_AUTO) {
+ /* AUTO Mode */
+ phy_reg |= db->PHY_reg4;
+ } else {
+ /* Force Mode */
+ switch(db->media_mode) {
+ case ULI526X_10MHF: phy_reg |= 0x20; break;
+ case ULI526X_10MFD: phy_reg |= 0x40; break;
+ case ULI526X_100MHF: phy_reg |= 0x80; break;
+ case ULI526X_100MFD: phy_reg |= 0x100; break;
+ }
+
+ }
+
+ /* Write new capability to Phyxcer Reg4 */
+ if ( !(phy_reg & 0x01e0)) {
+ phy_reg|=db->PHY_reg4;
+ db->media_mode|=ULI526X_AUTO;
+ }
+ phy_write(db->ioaddr, db->phy_addr, 4, phy_reg, db->chip_id);
+
+ /* Restart Auto-Negotiation */
+ phy_write(db->ioaddr, db->phy_addr, 0, 0x1200, db->chip_id);
+ udelay(50);
+}
+
+
+/*
+ * Process op-mode
+ AUTO mode : PHY controller in Auto-negotiation Mode
+ * Force mode: PHY controller in force mode with HUB
+ * N-way force capability with SWITCH
+ */
+
+static void uli526x_process_mode(struct uli526x_board_info *db)
+{
+ u16 phy_reg;
+
+ /* Full Duplex Mode Check */
+ if (db->op_mode & 0x4)
+ db->cr6_data |= CR6_FDM; /* Set Full Duplex Bit */
+ else
+ db->cr6_data &= ~CR6_FDM; /* Clear Full Duplex Bit */
+
+ update_cr6(db->cr6_data, db->ioaddr);
+
+ /* 10/100M phyxcer force mode need */
+ if ( !(db->media_mode & 0x8)) {
+ /* Forece Mode */
+ phy_reg = phy_read(db->ioaddr, db->phy_addr, 6, db->chip_id);
+ if ( !(phy_reg & 0x1) ) {
+ /* parter without N-Way capability */
+ phy_reg = 0x0;
+ switch(db->op_mode) {
+ case ULI526X_10MHF: phy_reg = 0x0; break;
+ case ULI526X_10MFD: phy_reg = 0x100; break;
+ case ULI526X_100MHF: phy_reg = 0x2000; break;
+ case ULI526X_100MFD: phy_reg = 0x2100; break;
+ }
+ phy_write(db->ioaddr, db->phy_addr, 0, phy_reg, db->chip_id);
+ phy_write(db->ioaddr, db->phy_addr, 0, phy_reg, db->chip_id);
+ }
+ }
+}
+
+
+/*
+ * Write a word to Phy register
+ */
+
+static void phy_write(unsigned long iobase, u8 phy_addr, u8 offset, u16 phy_data, u32 chip_id)
+{
+ u16 i;
+ unsigned long ioaddr;
+
+ if(chip_id == PCI_ULI5263_ID)
+ {
+ phy_writeby_cr10(iobase, phy_addr, offset, phy_data);
+ return;
+ }
+ /* M5261/M5263 Chip */
+ ioaddr = iobase + DCR9;
+
+ /* Send 33 synchronization clock to Phy controller */
+ for (i = 0; i < 35; i++)
+ phy_write_1bit(ioaddr, PHY_DATA_1, chip_id);
+
+ /* Send start command(01) to Phy */
+ phy_write_1bit(ioaddr, PHY_DATA_0, chip_id);
+ phy_write_1bit(ioaddr, PHY_DATA_1, chip_id);
+
+ /* Send write command(01) to Phy */
+ phy_write_1bit(ioaddr, PHY_DATA_0, chip_id);
+ phy_write_1bit(ioaddr, PHY_DATA_1, chip_id);
+
+ /* Send Phy address */
+ for (i = 0x10; i > 0; i = i >> 1)
+ phy_write_1bit(ioaddr, phy_addr & i ? PHY_DATA_1 : PHY_DATA_0, chip_id);
+
+ /* Send register address */
+ for (i = 0x10; i > 0; i = i >> 1)
+ phy_write_1bit(ioaddr, offset & i ? PHY_DATA_1 : PHY_DATA_0, chip_id);
+
+ /* written trasnition */
+ phy_write_1bit(ioaddr, PHY_DATA_1, chip_id);
+ phy_write_1bit(ioaddr, PHY_DATA_0, chip_id);
+
+ /* Write a word data to PHY controller */
+ for ( i = 0x8000; i > 0; i >>= 1)
+ phy_write_1bit(ioaddr, phy_data & i ? PHY_DATA_1 : PHY_DATA_0, chip_id);
+
+}
+
+
+/*
+ * Read a word data from phy register
+ */
+
+static u16 phy_read(unsigned long iobase, u8 phy_addr, u8 offset, u32 chip_id)
+{
+ int i;
+ u16 phy_data;
+ unsigned long ioaddr;
+
+ if(chip_id == PCI_ULI5263_ID)
+ return phy_readby_cr10(iobase, phy_addr, offset);
+ /* M5261/M5263 Chip */
+ ioaddr = iobase + DCR9;
+
+ /* Send 33 synchronization clock to Phy controller */
+ for (i = 0; i < 35; i++)
+ phy_write_1bit(ioaddr, PHY_DATA_1, chip_id);
+
+ /* Send start command(01) to Phy */
+ phy_write_1bit(ioaddr, PHY_DATA_0, chip_id);
+ phy_write_1bit(ioaddr, PHY_DATA_1, chip_id);
+
+ /* Send read command(10) to Phy */
+ phy_write_1bit(ioaddr, PHY_DATA_1, chip_id);
+ phy_write_1bit(ioaddr, PHY_DATA_0, chip_id);
+
+ /* Send Phy address */
+ for (i = 0x10; i > 0; i = i >> 1)
+ phy_write_1bit(ioaddr, phy_addr & i ? PHY_DATA_1 : PHY_DATA_0, chip_id);
+
+ /* Send register address */
+ for (i = 0x10; i > 0; i = i >> 1)
+ phy_write_1bit(ioaddr, offset & i ? PHY_DATA_1 : PHY_DATA_0, chip_id);
+
+ /* Skip transition state */
+ phy_read_1bit(ioaddr, chip_id);
+
+ /* read 16bit data */
+ for (phy_data = 0, i = 0; i < 16; i++) {
+ phy_data <<= 1;
+ phy_data |= phy_read_1bit(ioaddr, chip_id);
+ }
+
+ return phy_data;
+}
+
+static u16 phy_readby_cr10(unsigned long iobase, u8 phy_addr, u8 offset)
+{
+ unsigned long ioaddr,cr10_value;
+
+ ioaddr = iobase + DCR10;
+ cr10_value = phy_addr;
+ cr10_value = (cr10_value<<5) + offset;
+ cr10_value = (cr10_value<<16) + 0x08000000;
+ outl(cr10_value,ioaddr);
+ udelay(1);
+ while(1)
+ {
+ cr10_value = inl(ioaddr);
+ if(cr10_value&0x10000000)
+ break;
+ }
+ return (cr10_value&0x0ffff);
+}
+
+static void phy_writeby_cr10(unsigned long iobase, u8 phy_addr, u8 offset, u16 phy_data)
+{
+ unsigned long ioaddr,cr10_value;
+
+ ioaddr = iobase + DCR10;
+ cr10_value = phy_addr;
+ cr10_value = (cr10_value<<5) + offset;
+ cr10_value = (cr10_value<<16) + 0x04000000 + phy_data;
+ outl(cr10_value,ioaddr);
+ udelay(1);
+}
+/*
+ * Write one bit data to Phy Controller
+ */
+
+static void phy_write_1bit(unsigned long ioaddr, u32 phy_data, u32 chip_id)
+{
+ outl(phy_data , ioaddr); /* MII Clock Low */
+ udelay(1);
+ outl(phy_data | MDCLKH, ioaddr); /* MII Clock High */
+ udelay(1);
+ outl(phy_data , ioaddr); /* MII Clock Low */
+ udelay(1);
+}
+
+
+/*
+ * Read one bit phy data from PHY controller
+ */
+
+static u16 phy_read_1bit(unsigned long ioaddr, u32 chip_id)
+{
+ u16 phy_data;
+
+ outl(0x50000 , ioaddr);
+ udelay(1);
+ phy_data = ( inl(ioaddr) >> 19 ) & 0x1;
+ outl(0x40000 , ioaddr);
+ udelay(1);
+
+ return phy_data;
+}
+
+
+static struct pci_device_id uli526x_pci_tbl[] = {
+ { 0x10B9, 0x5261, PCI_ANY_ID, PCI_ANY_ID, 0, 0, PCI_ULI5261_ID },
+ { 0x10B9, 0x5263, PCI_ANY_ID, PCI_ANY_ID, 0, 0, PCI_ULI5263_ID },
+ { 0, }
+};
+MODULE_DEVICE_TABLE(pci, uli526x_pci_tbl);
+
+
+static struct pci_driver uli526x_driver = {
+ .name = "uli526x",
+ .id_table = uli526x_pci_tbl,
+ .probe = uli526x_init_one,
+ .remove = __devexit_p(uli526x_remove_one),
+};
+
+MODULE_AUTHOR("Peer Chen, peer.chen@uli.com.tw");
+MODULE_DESCRIPTION("ULi M5261/M5263 fast ethernet driver");
+MODULE_LICENSE("GPL");
+
+MODULE_PARM(debug, "i");
+MODULE_PARM(mode, "i");
+MODULE_PARM(cr6set, "i");
+MODULE_PARM_DESC(debug, "ULi M5261/M5263 enable debugging (0-1)");
+MODULE_PARM_DESC(mode, "ULi M5261/M5263: Bit 0: 10/100Mbps, bit 2: duplex, bit 8: HomePNA");
+
+/* Description:
+ * when user used insmod to add module, system invoked init_module()
+ * to register the services.
+ */
+
+static int __init uli526x_init_module(void)
+{
+ int rc;
+
+ printk(version);
+ printed_version = 1;
+
+ ULI526X_DBUG(0, "init_module() ", debug);
+
+ if (debug)
+ uli526x_debug = debug; /* set debug flag */
+ if (cr6set)
+ uli526x_cr6_user_set = cr6set;
+
+ switch(mode) {
+ case ULI526X_10MHF:
+ case ULI526X_100MHF:
+ case ULI526X_10MFD:
+ case ULI526X_100MFD:
+ uli526x_media_mode = mode;
+ break;
+ default:uli526x_media_mode = ULI526X_AUTO;
+ break;
+ }
+
+ rc = pci_module_init(&uli526x_driver);
+ if (rc < 0)
+ return rc;
+
+ return 0;
+}
+
+
+/*
+ * Description:
+ * when user used rmmod to delete module, system invoked clean_module()
+ * to un-register all registered services.
+ */
+
+static void __exit uli526x_cleanup_module(void)
+{
+ ULI526X_DBUG(0, "uli526x_clean_module() ", debug);
+ pci_unregister_driver(&uli526x_driver);
+}
+
+module_init(uli526x_init_module);
+module_exit(uli526x_cleanup_module);
diff --git a/drivers/net/wan/cycx_drv.c b/drivers/net/wan/cycx_drv.c
index 6e74af62ca0..9e56fc346ba 100644
--- a/drivers/net/wan/cycx_drv.c
+++ b/drivers/net/wan/cycx_drv.c
@@ -56,7 +56,7 @@
#include <linux/sched.h> /* for jiffies, HZ, etc. */
#include <linux/cycx_drv.h> /* API definitions */
#include <linux/cycx_cfm.h> /* CYCX firmware module definitions */
-#include <linux/delay.h> /* udelay */
+#include <linux/delay.h> /* udelay, msleep_interruptible */
#include <asm/io.h> /* read[wl], write[wl], ioremap, iounmap */
#define MOD_VERSION 0
@@ -74,7 +74,6 @@ static int reset_cyc2x(void __iomem *addr);
static int detect_cyc2x(void __iomem *addr);
/* Miscellaneous functions */
-static void delay_cycx(int sec);
static int get_option_index(long *optlist, long optval);
static u16 checksum(u8 *buf, u32 len);
@@ -259,7 +258,7 @@ static int memory_exists(void __iomem *addr)
if (readw(addr + 0x10) == TEST_PATTERN)
return 1;
- delay_cycx(1);
+ msleep_interruptible(1 * 1000);
}
return 0;
@@ -316,7 +315,7 @@ static void cycx_reset_boot(void __iomem *addr, u8 *code, u32 len)
/* 80186 was in hold, go */
writeb(0, addr + START_CPU);
- delay_cycx(1);
+ msleep_interruptible(1 * 1000);
}
/* Load data.bin file through boot (reset) interface. */
@@ -462,13 +461,13 @@ static int load_cyc2x(struct cycx_hw *hw, struct cycx_firmware *cfm, u32 len)
cycx_reset_boot(hw->dpmbase, reset_image, img_hdr->reset_size);
/* reset is waiting for boot */
writew(GEN_POWER_ON, pt_cycld);
- delay_cycx(1);
+ msleep_interruptible(1 * 1000);
for (j = 0 ; j < 3 ; j++)
if (!readw(pt_cycld))
goto reset_loaded;
else
- delay_cycx(1);
+ msleep_interruptible(1 * 1000);
}
printk(KERN_ERR "%s: reset not started.\n", modname);
@@ -495,7 +494,7 @@ reset_loaded:
/* Arthur Ganzert's tip: wait a while after the firmware loading...
seg abr 26 17:17:12 EST 1999 - acme */
- delay_cycx(7);
+ msleep_interruptible(7 * 1000);
printk(KERN_INFO "%s: firmware loaded!\n", modname);
/* enable interrupts */
@@ -547,20 +546,13 @@ static int get_option_index(long *optlist, long optval)
static int reset_cyc2x(void __iomem *addr)
{
writeb(0, addr + RST_ENABLE);
- delay_cycx(2);
+ msleep_interruptible(2 * 1000);
writeb(0, addr + RST_DISABLE);
- delay_cycx(2);
+ msleep_interruptible(2 * 1000);
return memory_exists(addr);
}
-/* Delay */
-static void delay_cycx(int sec)
-{
- set_current_state(TASK_INTERRUPTIBLE);
- schedule_timeout(sec * HZ);
-}
-
/* Calculate 16-bit CRC using CCITT polynomial. */
static u16 checksum(u8 *buf, u32 len)
{
diff --git a/drivers/net/wan/hdlc_generic.c b/drivers/net/wan/hdlc_generic.c
index a63f6a2cc4f..cdd4c09c2d9 100644
--- a/drivers/net/wan/hdlc_generic.c
+++ b/drivers/net/wan/hdlc_generic.c
@@ -61,7 +61,7 @@ static struct net_device_stats *hdlc_get_stats(struct net_device *dev)
static int hdlc_rcv(struct sk_buff *skb, struct net_device *dev,
- struct packet_type *p)
+ struct packet_type *p, struct net_device *orig_dev)
{
hdlc_device *hdlc = dev_to_hdlc(dev);
if (hdlc->proto.netif_rx)
diff --git a/drivers/net/wan/lapbether.c b/drivers/net/wan/lapbether.c
index 7f2e3653c5e..6c302e9dbca 100644
--- a/drivers/net/wan/lapbether.c
+++ b/drivers/net/wan/lapbether.c
@@ -86,7 +86,7 @@ static __inline__ int dev_is_ethdev(struct net_device *dev)
/*
* Receive a LAPB frame via an ethernet interface.
*/
-static int lapbeth_rcv(struct sk_buff *skb, struct net_device *dev, struct packet_type *ptype)
+static int lapbeth_rcv(struct sk_buff *skb, struct net_device *dev, struct packet_type *ptype, struct net_device *orig_dev)
{
int len, err;
struct lapbethdev *lapbeth;
diff --git a/drivers/net/wan/sdla_fr.c b/drivers/net/wan/sdla_fr.c
index c5f5e62aab8..0497dbdb863 100644
--- a/drivers/net/wan/sdla_fr.c
+++ b/drivers/net/wan/sdla_fr.c
@@ -445,7 +445,7 @@ void s508_s514_unlock(sdla_t *card, unsigned long *smp_flags);
void s508_s514_lock(sdla_t *card, unsigned long *smp_flags);
unsigned short calc_checksum (char *, int);
-static int setup_fr_header(struct sk_buff** skb,
+static int setup_fr_header(struct sk_buff *skb,
struct net_device* dev, char op_mode);
@@ -1372,7 +1372,7 @@ static int if_send(struct sk_buff* skb, struct net_device* dev)
/* Move the if_header() code to here. By inserting frame
* relay header in if_header() we would break the
* tcpdump and other packet sniffers */
- chan->fr_header_len = setup_fr_header(&skb,dev,chan->common.usedby);
+ chan->fr_header_len = setup_fr_header(skb,dev,chan->common.usedby);
if (chan->fr_header_len < 0 ){
++chan->ifstats.tx_dropped;
++card->wandev.stats.tx_dropped;
@@ -1597,8 +1597,6 @@ static int setup_for_delayed_transmit(struct net_device* dev,
return 1;
}
- skb_unlink(skb);
-
chan->transmit_length = len;
chan->delay_skb = skb;
@@ -4871,18 +4869,15 @@ static void unconfig_fr (sdla_t *card)
}
}
-static int setup_fr_header(struct sk_buff **skb_orig, struct net_device* dev,
+static int setup_fr_header(struct sk_buff *skb, struct net_device* dev,
char op_mode)
{
- struct sk_buff *skb = *skb_orig;
fr_channel_t *chan=dev->priv;
- if (op_mode == WANPIPE){
-
+ if (op_mode == WANPIPE) {
chan->fr_header[0]=Q922_UI;
switch (htons(skb->protocol)){
-
case ETH_P_IP:
chan->fr_header[1]=NLPID_IP;
break;
@@ -4894,16 +4889,14 @@ static int setup_fr_header(struct sk_buff **skb_orig, struct net_device* dev,
}
/* If we are in bridging mode, we must apply
- * an Ethernet header */
- if (op_mode == BRIDGE || op_mode == BRIDGE_NODE){
-
-
+ * an Ethernet header
+ */
+ if (op_mode == BRIDGE || op_mode == BRIDGE_NODE) {
/* Encapsulate the packet as a bridged Ethernet frame. */
#ifdef DEBUG
printk(KERN_INFO "%s: encapsulating skb for frame relay\n",
dev->name);
#endif
-
chan->fr_header[0] = 0x03;
chan->fr_header[1] = 0x00;
chan->fr_header[2] = 0x80;
@@ -4916,7 +4909,6 @@ static int setup_fr_header(struct sk_buff **skb_orig, struct net_device* dev,
/* Yuck. */
skb->protocol = ETH_P_802_3;
return 8;
-
}
return 0;
diff --git a/drivers/net/wan/syncppp.c b/drivers/net/wan/syncppp.c
index 84b65c60c79..f58c794a963 100644
--- a/drivers/net/wan/syncppp.c
+++ b/drivers/net/wan/syncppp.c
@@ -1447,7 +1447,7 @@ static void sppp_print_bytes (u_char *p, u16 len)
* after interrupt servicing to process frames queued via netif_rx.
*/
-static int sppp_rcv(struct sk_buff *skb, struct net_device *dev, struct packet_type *p)
+static int sppp_rcv(struct sk_buff *skb, struct net_device *dev, struct packet_type *p, struct net_device *orig_dev)
{
if ((skb = skb_share_check(skb, GFP_ATOMIC)) == NULL)
return NET_RX_DROP;
diff --git a/drivers/net/wireless/orinoco.c b/drivers/net/wireless/orinoco.c
index 4d0b5a336bd..d7947358e49 100644
--- a/drivers/net/wireless/orinoco.c
+++ b/drivers/net/wireless/orinoco.c
@@ -4323,36 +4323,36 @@ static const struct iw_priv_args orinoco_privtab[] = {
*/
static const iw_handler orinoco_handler[] = {
- [SIOCSIWCOMMIT-SIOCIWFIRST] (iw_handler) orinoco_ioctl_commit,
- [SIOCGIWNAME -SIOCIWFIRST] (iw_handler) orinoco_ioctl_getname,
- [SIOCSIWFREQ -SIOCIWFIRST] (iw_handler) orinoco_ioctl_setfreq,
- [SIOCGIWFREQ -SIOCIWFIRST] (iw_handler) orinoco_ioctl_getfreq,
- [SIOCSIWMODE -SIOCIWFIRST] (iw_handler) orinoco_ioctl_setmode,
- [SIOCGIWMODE -SIOCIWFIRST] (iw_handler) orinoco_ioctl_getmode,
- [SIOCSIWSENS -SIOCIWFIRST] (iw_handler) orinoco_ioctl_setsens,
- [SIOCGIWSENS -SIOCIWFIRST] (iw_handler) orinoco_ioctl_getsens,
- [SIOCGIWRANGE -SIOCIWFIRST] (iw_handler) orinoco_ioctl_getiwrange,
- [SIOCSIWSPY -SIOCIWFIRST] (iw_handler) orinoco_ioctl_setspy,
- [SIOCGIWSPY -SIOCIWFIRST] (iw_handler) orinoco_ioctl_getspy,
- [SIOCSIWAP -SIOCIWFIRST] (iw_handler) orinoco_ioctl_setwap,
- [SIOCGIWAP -SIOCIWFIRST] (iw_handler) orinoco_ioctl_getwap,
- [SIOCSIWSCAN -SIOCIWFIRST] (iw_handler) orinoco_ioctl_setscan,
- [SIOCGIWSCAN -SIOCIWFIRST] (iw_handler) orinoco_ioctl_getscan,
- [SIOCSIWESSID -SIOCIWFIRST] (iw_handler) orinoco_ioctl_setessid,
- [SIOCGIWESSID -SIOCIWFIRST] (iw_handler) orinoco_ioctl_getessid,
- [SIOCSIWNICKN -SIOCIWFIRST] (iw_handler) orinoco_ioctl_setnick,
- [SIOCGIWNICKN -SIOCIWFIRST] (iw_handler) orinoco_ioctl_getnick,
- [SIOCSIWRATE -SIOCIWFIRST] (iw_handler) orinoco_ioctl_setrate,
- [SIOCGIWRATE -SIOCIWFIRST] (iw_handler) orinoco_ioctl_getrate,
- [SIOCSIWRTS -SIOCIWFIRST] (iw_handler) orinoco_ioctl_setrts,
- [SIOCGIWRTS -SIOCIWFIRST] (iw_handler) orinoco_ioctl_getrts,
- [SIOCSIWFRAG -SIOCIWFIRST] (iw_handler) orinoco_ioctl_setfrag,
- [SIOCGIWFRAG -SIOCIWFIRST] (iw_handler) orinoco_ioctl_getfrag,
- [SIOCGIWRETRY -SIOCIWFIRST] (iw_handler) orinoco_ioctl_getretry,
- [SIOCSIWENCODE-SIOCIWFIRST] (iw_handler) orinoco_ioctl_setiwencode,
- [SIOCGIWENCODE-SIOCIWFIRST] (iw_handler) orinoco_ioctl_getiwencode,
- [SIOCSIWPOWER -SIOCIWFIRST] (iw_handler) orinoco_ioctl_setpower,
- [SIOCGIWPOWER -SIOCIWFIRST] (iw_handler) orinoco_ioctl_getpower,
+ [SIOCSIWCOMMIT-SIOCIWFIRST] = (iw_handler) orinoco_ioctl_commit,
+ [SIOCGIWNAME -SIOCIWFIRST] = (iw_handler) orinoco_ioctl_getname,
+ [SIOCSIWFREQ -SIOCIWFIRST] = (iw_handler) orinoco_ioctl_setfreq,
+ [SIOCGIWFREQ -SIOCIWFIRST] = (iw_handler) orinoco_ioctl_getfreq,
+ [SIOCSIWMODE -SIOCIWFIRST] = (iw_handler) orinoco_ioctl_setmode,
+ [SIOCGIWMODE -SIOCIWFIRST] = (iw_handler) orinoco_ioctl_getmode,
+ [SIOCSIWSENS -SIOCIWFIRST] = (iw_handler) orinoco_ioctl_setsens,
+ [SIOCGIWSENS -SIOCIWFIRST] = (iw_handler) orinoco_ioctl_getsens,
+ [SIOCGIWRANGE -SIOCIWFIRST] = (iw_handler) orinoco_ioctl_getiwrange,
+ [SIOCSIWSPY -SIOCIWFIRST] = (iw_handler) orinoco_ioctl_setspy,
+ [SIOCGIWSPY -SIOCIWFIRST] = (iw_handler) orinoco_ioctl_getspy,
+ [SIOCSIWAP -SIOCIWFIRST] = (iw_handler) orinoco_ioctl_setwap,
+ [SIOCGIWAP -SIOCIWFIRST] = (iw_handler) orinoco_ioctl_getwap,
+ [SIOCSIWSCAN -SIOCIWFIRST] = (iw_handler) orinoco_ioctl_setscan,
+ [SIOCGIWSCAN -SIOCIWFIRST] = (iw_handler) orinoco_ioctl_getscan,
+ [SIOCSIWESSID -SIOCIWFIRST] = (iw_handler) orinoco_ioctl_setessid,
+ [SIOCGIWESSID -SIOCIWFIRST] = (iw_handler) orinoco_ioctl_getessid,
+ [SIOCSIWNICKN -SIOCIWFIRST] = (iw_handler) orinoco_ioctl_setnick,
+ [SIOCGIWNICKN -SIOCIWFIRST] = (iw_handler) orinoco_ioctl_getnick,
+ [SIOCSIWRATE -SIOCIWFIRST] = (iw_handler) orinoco_ioctl_setrate,
+ [SIOCGIWRATE -SIOCIWFIRST] = (iw_handler) orinoco_ioctl_getrate,
+ [SIOCSIWRTS -SIOCIWFIRST] = (iw_handler) orinoco_ioctl_setrts,
+ [SIOCGIWRTS -SIOCIWFIRST] = (iw_handler) orinoco_ioctl_getrts,
+ [SIOCSIWFRAG -SIOCIWFIRST] = (iw_handler) orinoco_ioctl_setfrag,
+ [SIOCGIWFRAG -SIOCIWFIRST] = (iw_handler) orinoco_ioctl_getfrag,
+ [SIOCGIWRETRY -SIOCIWFIRST] = (iw_handler) orinoco_ioctl_getretry,
+ [SIOCSIWENCODE-SIOCIWFIRST] = (iw_handler) orinoco_ioctl_setiwencode,
+ [SIOCGIWENCODE-SIOCIWFIRST] = (iw_handler) orinoco_ioctl_getiwencode,
+ [SIOCSIWPOWER -SIOCIWFIRST] = (iw_handler) orinoco_ioctl_setpower,
+ [SIOCGIWPOWER -SIOCIWFIRST] = (iw_handler) orinoco_ioctl_getpower,
};
@@ -4360,15 +4360,15 @@ static const iw_handler orinoco_handler[] = {
Added typecasting since we no longer use iwreq_data -- Moustafa
*/
static const iw_handler orinoco_private_handler[] = {
- [0] (iw_handler) orinoco_ioctl_reset,
- [1] (iw_handler) orinoco_ioctl_reset,
- [2] (iw_handler) orinoco_ioctl_setport3,
- [3] (iw_handler) orinoco_ioctl_getport3,
- [4] (iw_handler) orinoco_ioctl_setpreamble,
- [5] (iw_handler) orinoco_ioctl_getpreamble,
- [6] (iw_handler) orinoco_ioctl_setibssport,
- [7] (iw_handler) orinoco_ioctl_getibssport,
- [9] (iw_handler) orinoco_ioctl_getrid,
+ [0] = (iw_handler) orinoco_ioctl_reset,
+ [1] = (iw_handler) orinoco_ioctl_reset,
+ [2] = (iw_handler) orinoco_ioctl_setport3,
+ [3] = (iw_handler) orinoco_ioctl_getport3,
+ [4] = (iw_handler) orinoco_ioctl_setpreamble,
+ [5] = (iw_handler) orinoco_ioctl_getpreamble,
+ [6] = (iw_handler) orinoco_ioctl_setibssport,
+ [7] = (iw_handler) orinoco_ioctl_getibssport,
+ [9] = (iw_handler) orinoco_ioctl_getrid,
};
static const struct iw_handler_def orinoco_handler_def = {