summaryrefslogtreecommitdiffstats
path: root/drivers/net/wireless/ath5k/dma.c
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/net/wireless/ath5k/dma.c')
-rw-r--r--drivers/net/wireless/ath5k/dma.c190
1 files changed, 145 insertions, 45 deletions
diff --git a/drivers/net/wireless/ath5k/dma.c b/drivers/net/wireless/ath5k/dma.c
index 7adceb2c7fa..7e2b1a67e5d 100644
--- a/drivers/net/wireless/ath5k/dma.c
+++ b/drivers/net/wireless/ath5k/dma.c
@@ -472,9 +472,6 @@ bool ath5k_hw_is_intr_pending(struct ath5k_hw *ah)
*
* NOTE: We use read-and-clear register, so after this function is called ISR
* is zeroed.
- *
- * XXX: Why filter interrupts in sw with interrupt_mask ? No benefit at all
- * plus it can be misleading (one might thing that we save interrupts this way)
*/
int ath5k_hw_get_isr(struct ath5k_hw *ah, enum ath5k_int *interrupt_mask)
{
@@ -494,11 +491,16 @@ int ath5k_hw_get_isr(struct ath5k_hw *ah, enum ath5k_int *interrupt_mask)
}
} else {
/*
- * Read interrupt status from the Read-And-Clear
- * shadow register.
+ * Read interrupt status from Interrupt
+ * Status Register shadow copy (Read And Clear)
+ *
* Note: PISR/SISR Not available on 5210
*/
data = ath5k_hw_reg_read(ah, AR5K_RAC_PISR);
+ if (unlikely(data == AR5K_INT_NOCARD)) {
+ *interrupt_mask = data;
+ return -ENODEV;
+ }
}
/*
@@ -506,17 +508,9 @@ int ath5k_hw_get_isr(struct ath5k_hw *ah, enum ath5k_int *interrupt_mask)
*/
*interrupt_mask = (data & AR5K_INT_COMMON) & ah->ah_imr;
- if (unlikely(data == AR5K_INT_NOCARD))
- return -ENODEV;
-
- if (data & (AR5K_ISR_RXOK | AR5K_ISR_RXERR))
- *interrupt_mask |= AR5K_INT_RX;
-
- if (data & (AR5K_ISR_TXOK | AR5K_ISR_TXERR
- | AR5K_ISR_TXDESC | AR5K_ISR_TXEOL))
- *interrupt_mask |= AR5K_INT_TX;
-
if (ah->ah_version != AR5K_AR5210) {
+ u32 sisr2 = ath5k_hw_reg_read(ah, AR5K_RAC_SISR2);
+
/*HIU = Host Interface Unit (PCI etc)*/
if (unlikely(data & (AR5K_ISR_HIUERR)))
*interrupt_mask |= AR5K_INT_FATAL;
@@ -524,24 +518,93 @@ int ath5k_hw_get_isr(struct ath5k_hw *ah, enum ath5k_int *interrupt_mask)
/*Beacon Not Ready*/
if (unlikely(data & (AR5K_ISR_BNR)))
*interrupt_mask |= AR5K_INT_BNR;
- }
- /*
- * XXX: BMISS interrupts may occur after association.
- * I found this on 5210 code but it needs testing. If this is
- * true we should disable them before assoc and re-enable them
- * after a successfull assoc + some jiffies.
- */
-#if 0
- interrupt_mask &= ~AR5K_INT_BMISS;
-#endif
+ if (unlikely(sisr2 & (AR5K_SISR2_SSERR |
+ AR5K_SISR2_DPERR |
+ AR5K_SISR2_MCABT)))
+ *interrupt_mask |= AR5K_INT_FATAL;
+
+ if (data & AR5K_ISR_TIM)
+ *interrupt_mask |= AR5K_INT_TIM;
+
+ if (data & AR5K_ISR_BCNMISC) {
+ if (sisr2 & AR5K_SISR2_TIM)
+ *interrupt_mask |= AR5K_INT_TIM;
+ if (sisr2 & AR5K_SISR2_DTIM)
+ *interrupt_mask |= AR5K_INT_DTIM;
+ if (sisr2 & AR5K_SISR2_DTIM_SYNC)
+ *interrupt_mask |= AR5K_INT_DTIM_SYNC;
+ if (sisr2 & AR5K_SISR2_BCN_TIMEOUT)
+ *interrupt_mask |= AR5K_INT_BCN_TIMEOUT;
+ if (sisr2 & AR5K_SISR2_CAB_TIMEOUT)
+ *interrupt_mask |= AR5K_INT_CAB_TIMEOUT;
+ }
+
+ if (data & AR5K_ISR_RXDOPPLER)
+ *interrupt_mask |= AR5K_INT_RX_DOPPLER;
+ if (data & AR5K_ISR_QCBRORN) {
+ *interrupt_mask |= AR5K_INT_QCBRORN;
+ ah->ah_txq_isr |= AR5K_REG_MS(
+ ath5k_hw_reg_read(ah, AR5K_RAC_SISR3),
+ AR5K_SISR3_QCBRORN);
+ }
+ if (data & AR5K_ISR_QCBRURN) {
+ *interrupt_mask |= AR5K_INT_QCBRURN;
+ ah->ah_txq_isr |= AR5K_REG_MS(
+ ath5k_hw_reg_read(ah, AR5K_RAC_SISR3),
+ AR5K_SISR3_QCBRURN);
+ }
+ if (data & AR5K_ISR_QTRIG) {
+ *interrupt_mask |= AR5K_INT_QTRIG;
+ ah->ah_txq_isr |= AR5K_REG_MS(
+ ath5k_hw_reg_read(ah, AR5K_RAC_SISR4),
+ AR5K_SISR4_QTRIG);
+ }
+
+ if (data & AR5K_ISR_TXOK)
+ ah->ah_txq_isr |= AR5K_REG_MS(
+ ath5k_hw_reg_read(ah, AR5K_RAC_SISR0),
+ AR5K_SISR0_QCU_TXOK);
+
+ if (data & AR5K_ISR_TXDESC)
+ ah->ah_txq_isr |= AR5K_REG_MS(
+ ath5k_hw_reg_read(ah, AR5K_RAC_SISR0),
+ AR5K_SISR0_QCU_TXDESC);
+
+ if (data & AR5K_ISR_TXERR)
+ ah->ah_txq_isr |= AR5K_REG_MS(
+ ath5k_hw_reg_read(ah, AR5K_RAC_SISR1),
+ AR5K_SISR1_QCU_TXERR);
+
+ if (data & AR5K_ISR_TXEOL)
+ ah->ah_txq_isr |= AR5K_REG_MS(
+ ath5k_hw_reg_read(ah, AR5K_RAC_SISR1),
+ AR5K_SISR1_QCU_TXEOL);
+
+ if (data & AR5K_ISR_TXURN)
+ ah->ah_txq_isr |= AR5K_REG_MS(
+ ath5k_hw_reg_read(ah, AR5K_RAC_SISR2),
+ AR5K_SISR2_QCU_TXURN);
+ } else {
+ if (unlikely(data & (AR5K_ISR_SSERR | AR5K_ISR_MCABT
+ | AR5K_ISR_HIUERR | AR5K_ISR_DPERR)))
+ *interrupt_mask |= AR5K_INT_FATAL;
+
+ /*
+ * XXX: BMISS interrupts may occur after association.
+ * I found this on 5210 code but it needs testing. If this is
+ * true we should disable them before assoc and re-enable them
+ * after a successfull assoc + some jiffies.
+ interrupt_mask &= ~AR5K_INT_BMISS;
+ */
+ }
/*
* In case we didn't handle anything,
* print the register value.
*/
if (unlikely(*interrupt_mask == 0 && net_ratelimit()))
- ATH5K_PRINTF("0x%08x\n", data);
+ ATH5K_PRINTF("ISR: 0x%08x IMR: 0x%08x\n", data, ah->ah_imr);
return 0;
}
@@ -560,14 +623,17 @@ enum ath5k_int ath5k_hw_set_imr(struct ath5k_hw *ah, enum ath5k_int new_mask)
{
enum ath5k_int old_mask, int_mask;
+ old_mask = ah->ah_imr;
+
/*
* Disable card interrupts to prevent any race conditions
- * (they will be re-enabled afterwards).
+ * (they will be re-enabled afterwards if AR5K_INT GLOBAL
+ * is set again on the new mask).
*/
- ath5k_hw_reg_write(ah, AR5K_IER_DISABLE, AR5K_IER);
- ath5k_hw_reg_read(ah, AR5K_IER);
-
- old_mask = ah->ah_imr;
+ if (old_mask & AR5K_INT_GLOBAL) {
+ ath5k_hw_reg_write(ah, AR5K_IER_DISABLE, AR5K_IER);
+ ath5k_hw_reg_read(ah, AR5K_IER);
+ }
/*
* Add additional, chipset-dependent interrupt mask flags
@@ -575,30 +641,64 @@ enum ath5k_int ath5k_hw_set_imr(struct ath5k_hw *ah, enum ath5k_int new_mask)
*/
int_mask = new_mask & AR5K_INT_COMMON;
- if (new_mask & AR5K_INT_RX)
- int_mask |= AR5K_IMR_RXOK | AR5K_IMR_RXERR | AR5K_IMR_RXORN |
- AR5K_IMR_RXDESC;
-
- if (new_mask & AR5K_INT_TX)
- int_mask |= AR5K_IMR_TXOK | AR5K_IMR_TXERR | AR5K_IMR_TXDESC |
- AR5K_IMR_TXURN;
-
if (ah->ah_version != AR5K_AR5210) {
+ /* Preserve per queue TXURN interrupt mask */
+ u32 simr2 = ath5k_hw_reg_read(ah, AR5K_SIMR2)
+ & AR5K_SIMR2_QCU_TXURN;
+
if (new_mask & AR5K_INT_FATAL) {
int_mask |= AR5K_IMR_HIUERR;
- AR5K_REG_ENABLE_BITS(ah, AR5K_SIMR2, AR5K_SIMR2_MCABT |
- AR5K_SIMR2_SSERR | AR5K_SIMR2_DPERR);
+ simr2 |= (AR5K_SIMR2_MCABT | AR5K_SIMR2_SSERR
+ | AR5K_SIMR2_DPERR);
}
+
+ /*Beacon Not Ready*/
+ if (new_mask & AR5K_INT_BNR)
+ int_mask |= AR5K_INT_BNR;
+
+ if (new_mask & AR5K_INT_TIM)
+ int_mask |= AR5K_IMR_TIM;
+
+ if (new_mask & AR5K_INT_TIM)
+ simr2 |= AR5K_SISR2_TIM;
+ if (new_mask & AR5K_INT_DTIM)
+ simr2 |= AR5K_SISR2_DTIM;
+ if (new_mask & AR5K_INT_DTIM_SYNC)
+ simr2 |= AR5K_SISR2_DTIM_SYNC;
+ if (new_mask & AR5K_INT_BCN_TIMEOUT)
+ simr2 |= AR5K_SISR2_BCN_TIMEOUT;
+ if (new_mask & AR5K_INT_CAB_TIMEOUT)
+ simr2 |= AR5K_SISR2_CAB_TIMEOUT;
+
+ if (new_mask & AR5K_INT_RX_DOPPLER)
+ int_mask |= AR5K_IMR_RXDOPPLER;
+
+ /* Note: Per queue interrupt masks
+ * are set via reset_tx_queue (qcu.c) */
+ ath5k_hw_reg_write(ah, int_mask, AR5K_PIMR);
+ ath5k_hw_reg_write(ah, simr2, AR5K_SIMR2);
+
+ } else {
+ if (new_mask & AR5K_INT_FATAL)
+ int_mask |= (AR5K_IMR_SSERR | AR5K_IMR_MCABT
+ | AR5K_IMR_HIUERR | AR5K_IMR_DPERR);
+
+ ath5k_hw_reg_write(ah, int_mask, AR5K_IMR);
}
- ath5k_hw_reg_write(ah, int_mask, AR5K_PIMR);
+ /* If RXNOFRM interrupt is masked disable it
+ * by setting AR5K_RXNOFRM to zero */
+ if (!(new_mask & AR5K_INT_RXNOFRM))
+ ath5k_hw_reg_write(ah, 0, AR5K_RXNOFRM);
/* Store new interrupt mask */
ah->ah_imr = new_mask;
- /* ..re-enable interrupts */
- ath5k_hw_reg_write(ah, AR5K_IER_ENABLE, AR5K_IER);
- ath5k_hw_reg_read(ah, AR5K_IER);
+ /* ..re-enable interrupts if AR5K_INT_GLOBAL is set */
+ if (new_mask & AR5K_INT_GLOBAL) {
+ ath5k_hw_reg_write(ah, AR5K_IER_ENABLE, AR5K_IER);
+ ath5k_hw_reg_read(ah, AR5K_IER);
+ }
return old_mask;
}