summaryrefslogtreecommitdiffstats
path: root/drivers/net/e1000e/netdev.c
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/net/e1000e/netdev.c')
-rw-r--r--drivers/net/e1000e/netdev.c645
1 files changed, 403 insertions, 242 deletions
diff --git a/drivers/net/e1000e/netdev.c b/drivers/net/e1000e/netdev.c
index fc5c63f4f57..c8dc47fd132 100644
--- a/drivers/net/e1000e/netdev.c
+++ b/drivers/net/e1000e/netdev.c
@@ -1,7 +1,7 @@
/*******************************************************************************
Intel PRO/1000 Linux driver
- Copyright(c) 1999 - 2007 Intel Corporation.
+ Copyright(c) 1999 - 2008 Intel Corporation.
This program is free software; you can redistribute it and/or modify it
under the terms and conditions of the GNU General Public License,
@@ -82,7 +82,7 @@ static int e1000_desc_unused(struct e1000_ring *ring)
}
/**
- * e1000_receive_skb - helper function to handle rx indications
+ * e1000_receive_skb - helper function to handle Rx indications
* @adapter: board private structure
* @status: descriptor status field as written by hardware
* @vlan: descriptor vlan field as written by hardware (no le/be conversion)
@@ -138,8 +138,9 @@ static void e1000_rx_checksum(struct e1000_adapter *adapter, u32 status_err,
/* TCP checksum is good */
skb->ip_summed = CHECKSUM_UNNECESSARY;
} else {
- /* IP fragment with UDP payload */
- /* Hardware complements the payload checksum, so we undo it
+ /*
+ * IP fragment with UDP payload
+ * Hardware complements the payload checksum, so we undo it
* and then put the value in host order for further stack use.
*/
__sum16 sum = (__force __sum16)htons(csum);
@@ -182,7 +183,8 @@ static void e1000_alloc_rx_buffers(struct e1000_adapter *adapter,
break;
}
- /* Make buffer alignment 2 beyond a 16 byte boundary
+ /*
+ * Make buffer alignment 2 beyond a 16 byte boundary
* this will result in a 16 byte aligned IP header after
* the 14 byte MAC header is removed
*/
@@ -213,10 +215,12 @@ map_skb:
if (i-- == 0)
i = (rx_ring->count - 1);
- /* Force memory writes to complete before letting h/w
+ /*
+ * Force memory writes to complete before letting h/w
* know there are new descriptors to fetch. (Only
* applicable for weak-ordered memory model archs,
- * such as IA-64). */
+ * such as IA-64).
+ */
wmb();
writel(i, adapter->hw.hw_addr + rx_ring->tail);
}
@@ -285,7 +289,8 @@ static void e1000_alloc_rx_buffers_ps(struct e1000_adapter *adapter,
break;
}
- /* Make buffer alignment 2 beyond a 16 byte boundary
+ /*
+ * Make buffer alignment 2 beyond a 16 byte boundary
* this will result in a 16 byte aligned IP header after
* the 14 byte MAC header is removed
*/
@@ -319,12 +324,15 @@ no_buffers:
if (!(i--))
i = (rx_ring->count - 1);
- /* Force memory writes to complete before letting h/w
+ /*
+ * Force memory writes to complete before letting h/w
* know there are new descriptors to fetch. (Only
* applicable for weak-ordered memory model archs,
- * such as IA-64). */
+ * such as IA-64).
+ */
wmb();
- /* Hardware increments by 16 bytes, but packet split
+ /*
+ * Hardware increments by 16 bytes, but packet split
* descriptors are 32 bytes...so we increment tail
* twice as much.
*/
@@ -409,9 +417,11 @@ static bool e1000_clean_rx_irq(struct e1000_adapter *adapter,
total_rx_bytes += length;
total_rx_packets++;
- /* code added for copybreak, this should improve
+ /*
+ * code added for copybreak, this should improve
* performance for small packets with large amounts
- * of reassembly being done in the stack */
+ * of reassembly being done in the stack
+ */
if (length < copybreak) {
struct sk_buff *new_skb =
netdev_alloc_skb(netdev, length + NET_IP_ALIGN);
@@ -581,14 +591,15 @@ static bool e1000_clean_tx_irq(struct e1000_adapter *adapter)
}
if (adapter->detect_tx_hung) {
- /* Detect a transmit hang in hardware, this serializes the
- * check with the clearing of time_stamp and movement of i */
+ /*
+ * Detect a transmit hang in hardware, this serializes the
+ * check with the clearing of time_stamp and movement of i
+ */
adapter->detect_tx_hung = 0;
if (tx_ring->buffer_info[eop].dma &&
time_after(jiffies, tx_ring->buffer_info[eop].time_stamp
+ (adapter->tx_timeout_factor * HZ))
- && !(er32(STATUS) &
- E1000_STATUS_TXOFF)) {
+ && !(er32(STATUS) & E1000_STATUS_TXOFF)) {
e1000_print_tx_hang(adapter);
netif_stop_queue(netdev);
}
@@ -677,21 +688,28 @@ static bool e1000_clean_rx_irq_ps(struct e1000_adapter *adapter,
skb_put(skb, length);
{
- /* this looks ugly, but it seems compiler issues make it
- more efficient than reusing j */
+ /*
+ * this looks ugly, but it seems compiler issues make it
+ * more efficient than reusing j
+ */
int l1 = le16_to_cpu(rx_desc->wb.upper.length[0]);
- /* page alloc/put takes too long and effects small packet
- * throughput, so unsplit small packets and save the alloc/put*/
+ /*
+ * page alloc/put takes too long and effects small packet
+ * throughput, so unsplit small packets and save the alloc/put
+ * only valid in softirq (napi) context to call kmap_*
+ */
if (l1 && (l1 <= copybreak) &&
((length + l1) <= adapter->rx_ps_bsize0)) {
u8 *vaddr;
ps_page = &buffer_info->ps_pages[0];
- /* there is no documentation about how to call
+ /*
+ * there is no documentation about how to call
* kmap_atomic, so we can't hold the mapping
- * very long */
+ * very long
+ */
pci_dma_sync_single_for_cpu(pdev, ps_page->dma,
PAGE_SIZE, PCI_DMA_FROMDEVICE);
vaddr = kmap_atomic(ps_page->page, KM_SKB_DATA_SOFTIRQ);
@@ -836,26 +854,31 @@ static irqreturn_t e1000_intr_msi(int irq, void *data)
struct e1000_hw *hw = &adapter->hw;
u32 icr = er32(ICR);
- /* read ICR disables interrupts using IAM, so keep up with our
- * enable/disable accounting */
- atomic_inc(&adapter->irq_sem);
+ /*
+ * read ICR disables interrupts using IAM
+ */
if (icr & (E1000_ICR_RXSEQ | E1000_ICR_LSC)) {
hw->mac.get_link_status = 1;
- /* ICH8 workaround-- Call gig speed drop workaround on cable
- * disconnect (LSC) before accessing any PHY registers */
+ /*
+ * ICH8 workaround-- Call gig speed drop workaround on cable
+ * disconnect (LSC) before accessing any PHY registers
+ */
if ((adapter->flags & FLAG_LSC_GIG_SPEED_DROP) &&
(!(er32(STATUS) & E1000_STATUS_LU)))
e1000e_gig_downshift_workaround_ich8lan(hw);
- /* 80003ES2LAN workaround-- For packet buffer work-around on
+ /*
+ * 80003ES2LAN workaround-- For packet buffer work-around on
* link down event; disable receives here in the ISR and reset
- * adapter in watchdog */
+ * adapter in watchdog
+ */
if (netif_carrier_ok(netdev) &&
adapter->flags & FLAG_RX_NEEDS_RESTART) {
/* disable receives */
u32 rctl = er32(RCTL);
ew32(RCTL, rctl & ~E1000_RCTL_EN);
+ adapter->flags |= FLAG_RX_RESTART_NOW;
}
/* guard against interrupt when we're going down */
if (!test_bit(__E1000_DOWN, &adapter->state))
@@ -868,8 +891,6 @@ static irqreturn_t e1000_intr_msi(int irq, void *data)
adapter->total_rx_bytes = 0;
adapter->total_rx_packets = 0;
__netif_rx_schedule(netdev, &adapter->napi);
- } else {
- atomic_dec(&adapter->irq_sem);
}
return IRQ_HANDLED;
@@ -890,26 +911,31 @@ static irqreturn_t e1000_intr(int irq, void *data)
if (!icr)
return IRQ_NONE; /* Not our interrupt */
- /* IMS will not auto-mask if INT_ASSERTED is not set, and if it is
- * not set, then the adapter didn't send an interrupt */
+ /*
+ * IMS will not auto-mask if INT_ASSERTED is not set, and if it is
+ * not set, then the adapter didn't send an interrupt
+ */
if (!(icr & E1000_ICR_INT_ASSERTED))
return IRQ_NONE;
- /* Interrupt Auto-Mask...upon reading ICR,
+ /*
+ * Interrupt Auto-Mask...upon reading ICR,
* interrupts are masked. No need for the
- * IMC write, but it does mean we should
- * account for it ASAP. */
- atomic_inc(&adapter->irq_sem);
+ * IMC write
+ */
if (icr & (E1000_ICR_RXSEQ | E1000_ICR_LSC)) {
hw->mac.get_link_status = 1;
- /* ICH8 workaround-- Call gig speed drop workaround on cable
- * disconnect (LSC) before accessing any PHY registers */
+ /*
+ * ICH8 workaround-- Call gig speed drop workaround on cable
+ * disconnect (LSC) before accessing any PHY registers
+ */
if ((adapter->flags & FLAG_LSC_GIG_SPEED_DROP) &&
(!(er32(STATUS) & E1000_STATUS_LU)))
e1000e_gig_downshift_workaround_ich8lan(hw);
- /* 80003ES2LAN workaround--
+ /*
+ * 80003ES2LAN workaround--
* For packet buffer work-around on link down event;
* disable receives here in the ISR and
* reset adapter in watchdog
@@ -919,6 +945,7 @@ static irqreturn_t e1000_intr(int irq, void *data)
/* disable receives */
rctl = er32(RCTL);
ew32(RCTL, rctl & ~E1000_RCTL_EN);
+ adapter->flags |= FLAG_RX_RESTART_NOW;
}
/* guard against interrupt when we're going down */
if (!test_bit(__E1000_DOWN, &adapter->state))
@@ -931,8 +958,6 @@ static irqreturn_t e1000_intr(int irq, void *data)
adapter->total_rx_bytes = 0;
adapter->total_rx_packets = 0;
__netif_rx_schedule(netdev, &adapter->napi);
- } else {
- atomic_dec(&adapter->irq_sem);
}
return IRQ_HANDLED;
@@ -983,7 +1008,6 @@ static void e1000_irq_disable(struct e1000_adapter *adapter)
{
struct e1000_hw *hw = &adapter->hw;
- atomic_inc(&adapter->irq_sem);
ew32(IMC, ~0);
e1e_flush();
synchronize_irq(adapter->pdev->irq);
@@ -996,10 +1020,8 @@ static void e1000_irq_enable(struct e1000_adapter *adapter)
{
struct e1000_hw *hw = &adapter->hw;
- if (atomic_dec_and_test(&adapter->irq_sem)) {
- ew32(IMS, IMS_ENABLE_MASK);
- e1e_flush();
- }
+ ew32(IMS, IMS_ENABLE_MASK);
+ e1e_flush();
}
/**
@@ -1023,8 +1045,7 @@ static void e1000_get_hw_control(struct e1000_adapter *adapter)
ew32(SWSM, swsm | E1000_SWSM_DRV_LOAD);
} else if (adapter->flags & FLAG_HAS_CTRLEXT_ON_LOAD) {
ctrl_ext = er32(CTRL_EXT);
- ew32(CTRL_EXT,
- ctrl_ext | E1000_CTRL_EXT_DRV_LOAD);
+ ew32(CTRL_EXT, ctrl_ext | E1000_CTRL_EXT_DRV_LOAD);
}
}
@@ -1050,8 +1071,7 @@ static void e1000_release_hw_control(struct e1000_adapter *adapter)
ew32(SWSM, swsm & ~E1000_SWSM_DRV_LOAD);
} else if (adapter->flags & FLAG_HAS_CTRLEXT_ON_LOAD) {
ctrl_ext = er32(CTRL_EXT);
- ew32(CTRL_EXT,
- ctrl_ext & ~E1000_CTRL_EXT_DRV_LOAD);
+ ew32(CTRL_EXT, ctrl_ext & ~E1000_CTRL_EXT_DRV_LOAD);
}
}
@@ -1353,9 +1373,11 @@ static void e1000_set_itr(struct e1000_adapter *adapter)
set_itr_now:
if (new_itr != adapter->itr) {
- /* this attempts to bias the interrupt rate towards Bulk
+ /*
+ * this attempts to bias the interrupt rate towards Bulk
* by adding intermediate steps when interrupt rate is
- * increasing */
+ * increasing
+ */
new_itr = new_itr > adapter->itr ?
min(adapter->itr + (new_itr >> 2), new_itr) :
new_itr;
@@ -1366,7 +1388,7 @@ set_itr_now:
/**
* e1000_clean - NAPI Rx polling callback
- * @adapter: board private structure
+ * @napi: struct associated with this polling callback
* @budget: amount of packets driver is allowed to process this poll
**/
static int e1000_clean(struct napi_struct *napi, int budget)
@@ -1378,10 +1400,12 @@ static int e1000_clean(struct napi_struct *napi, int budget)
/* Must NOT use netdev_priv macro here. */
adapter = poll_dev->priv;
- /* e1000_clean is called per-cpu. This lock protects
+ /*
+ * e1000_clean is called per-cpu. This lock protects
* tx_ring from being cleaned by multiple cpus
* simultaneously. A failure obtaining the lock means
- * tx_ring is currently being cleaned anyway. */
+ * tx_ring is currently being cleaned anyway.
+ */
if (spin_trylock(&adapter->tx_queue_lock)) {
tx_cleaned = e1000_clean_tx_irq(adapter);
spin_unlock(&adapter->tx_queue_lock);
@@ -1427,9 +1451,12 @@ static void e1000_vlan_rx_kill_vid(struct net_device *netdev, u16 vid)
struct e1000_hw *hw = &adapter->hw;
u32 vfta, index;
- e1000_irq_disable(adapter);
+ if (!test_bit(__E1000_DOWN, &adapter->state))
+ e1000_irq_disable(adapter);
vlan_group_set_device(adapter->vlgrp, vid, NULL);
- e1000_irq_enable(adapter);
+
+ if (!test_bit(__E1000_DOWN, &adapter->state))
+ e1000_irq_enable(adapter);
if ((adapter->hw.mng_cookie.status &
E1000_MNG_DHCP_COOKIE_STATUS_VLAN) &&
@@ -1480,7 +1507,8 @@ static void e1000_vlan_rx_register(struct net_device *netdev,
struct e1000_hw *hw = &adapter->hw;
u32 ctrl, rctl;
- e1000_irq_disable(adapter);
+ if (!test_bit(__E1000_DOWN, &adapter->state))
+ e1000_irq_disable(adapter);
adapter->vlgrp = grp;
if (grp) {
@@ -1517,7 +1545,8 @@ static void e1000_vlan_rx_register(struct net_device *netdev,
}
}
- e1000_irq_enable(adapter);
+ if (!test_bit(__E1000_DOWN, &adapter->state))
+ e1000_irq_enable(adapter);
}
static void e1000_restore_vlan(struct e1000_adapter *adapter)
@@ -1546,9 +1575,11 @@ static void e1000_init_manageability(struct e1000_adapter *adapter)
manc = er32(MANC);
- /* enable receiving management packets to the host. this will probably
+ /*
+ * enable receiving management packets to the host. this will probably
* generate destination unreachable messages from the host OS, but
- * the packets will be handled on SMBUS */
+ * the packets will be handled on SMBUS
+ */
manc |= E1000_MANC_EN_MNG2HOST;
manc2h = er32(MANC2H);
#define E1000_MNG2HOST_PORT_623 (1 << 5)
@@ -1598,7 +1629,7 @@ static void e1000_configure_tx(struct e1000_adapter *adapter)
/* Set the Tx Interrupt Delay register */
ew32(TIDV, adapter->tx_int_delay);
- /* tx irq moderation */
+ /* Tx irq moderation */
ew32(TADV, adapter->tx_abs_int_delay);
/* Program the Transmit Control Register */
@@ -1608,22 +1639,24 @@ static void e1000_configure_tx(struct e1000_adapter *adapter)
(E1000_COLLISION_THRESHOLD << E1000_CT_SHIFT);
if (adapter->flags & FLAG_TARC_SPEED_MODE_BIT) {
- tarc = er32(TARC0);
- /* set the speed mode bit, we'll clear it if we're not at
- * gigabit link later */
+ tarc = er32(TARC(0));
+ /*
+ * set the speed mode bit, we'll clear it if we're not at
+ * gigabit link later
+ */
#define SPEED_MODE_BIT (1 << 21)
tarc |= SPEED_MODE_BIT;
- ew32(TARC0, tarc);
+ ew32(TARC(0), tarc);
}
/* errata: program both queues to unweighted RR */
if (adapter->flags & FLAG_TARC_SET_BIT_ZERO) {
- tarc = er32(TARC0);
+ tarc = er32(TARC(0));
tarc |= 1;
- ew32(TARC0, tarc);
- tarc = er32(TARC1);
+ ew32(TARC(0), tarc);
+ tarc = er32(TARC(1));
tarc |= 1;
- ew32(TARC1, tarc);
+ ew32(TARC(1), tarc);
}
e1000e_config_collision_dist(hw);
@@ -1731,8 +1764,10 @@ static void e1000_setup_rctl(struct e1000_adapter *adapter)
/* Configure extra packet-split registers */
rfctl = er32(RFCTL);
rfctl |= E1000_RFCTL_EXTEN;
- /* disable packet split support for IPv6 extension headers,
- * because some malformed IPv6 headers can hang the RX */
+ /*
+ * disable packet split support for IPv6 extension headers,
+ * because some malformed IPv6 headers can hang the Rx
+ */
rfctl |= (E1000_RFCTL_IPV6_EX_DIS |
E1000_RFCTL_NEW_IPV6_EXT_DIS);
@@ -1761,6 +1796,8 @@ static void e1000_setup_rctl(struct e1000_adapter *adapter)
}
ew32(RCTL, rctl);
+ /* just started the receive unit, no need to restart */
+ adapter->flags &= ~FLAG_RX_RESTART_NOW;
}
/**
@@ -1801,8 +1838,7 @@ static void e1000_configure_rx(struct e1000_adapter *adapter)
/* irq moderation */
ew32(RADV, adapter->rx_abs_int_delay);
if (adapter->itr_setting != 0)
- ew32(ITR,
- 1000000000 / (adapter->itr * 256));
+ ew32(ITR, 1000000000 / (adapter->itr * 256));
ctrl_ext = er32(CTRL_EXT);
/* Reset delay timers after every interrupt */
@@ -1813,8 +1849,10 @@ static void e1000_configure_rx(struct e1000_adapter *adapter)
ew32(CTRL_EXT, ctrl_ext);
e1e_flush();
- /* Setup the HW Rx Head and Tail Descriptor Pointers and
- * the Base and Length of the Rx Descriptor Ring */
+ /*
+ * Setup the HW Rx Head and Tail Descriptor Pointers and
+ * the Base and Length of the Rx Descriptor Ring
+ */
rdba = rx_ring->dma;
ew32(RDBAL, (rdba & DMA_32BIT_MASK));
ew32(RDBAH, (rdba >> 32));
@@ -1829,8 +1867,10 @@ static void e1000_configure_rx(struct e1000_adapter *adapter)
if (adapter->flags & FLAG_RX_CSUM_ENABLED) {
rxcsum |= E1000_RXCSUM_TUOFL;
- /* IPv4 payload checksum for UDP fragments must be
- * used in conjunction with packet-split. */
+ /*
+ * IPv4 payload checksum for UDP fragments must be
+ * used in conjunction with packet-split.
+ */
if (adapter->rx_ps_pages)
rxcsum |= E1000_RXCSUM_IPPCSE;
} else {
@@ -1839,9 +1879,11 @@ static void e1000_configure_rx(struct e1000_adapter *adapter)
}
ew32(RXCSUM, rxcsum);
- /* Enable early receives on supported devices, only takes effect when
+ /*
+ * Enable early receives on supported devices, only takes effect when
* packet size is equal or larger than the specified value (in 8 byte
- * units), e.g. using jumbo frames when setting to E1000_ERT_2048 */
+ * units), e.g. using jumbo frames when setting to E1000_ERT_2048
+ */
if ((adapter->flags & FLAG_HAS_ERT) &&
(adapter->netdev->mtu > ETH_DATA_LEN))
ew32(ERT, E1000_ERT_2048);
@@ -1851,7 +1893,7 @@ static void e1000_configure_rx(struct e1000_adapter *adapter)
}
/**
- * e1000_mc_addr_list_update - Update Multicast addresses
+ * e1000_update_mc_addr_list - Update Multicast addresses
* @hw: pointer to the HW structure
* @mc_addr_list: array of multicast addresses to program
* @mc_addr_count: number of multicast addresses to program
@@ -1865,11 +1907,11 @@ static void e1000_configure_rx(struct e1000_adapter *adapter)
* exists and all implementations are handled in the generic version of this
* function.
**/
-static void e1000_mc_addr_list_update(struct e1000_hw *hw, u8 *mc_addr_list,
- u32 mc_addr_count, u32 rar_used_count,
- u32 rar_count)
+static void e1000_update_mc_addr_list(struct e1000_hw *hw, u8 *mc_addr_list,
+ u32 mc_addr_count, u32 rar_used_count,
+ u32 rar_count)
{
- hw->mac.ops.mc_addr_list_update(hw, mc_addr_list, mc_addr_count,
+ hw->mac.ops.update_mc_addr_list(hw, mc_addr_list, mc_addr_count,
rar_used_count, rar_count);
}
@@ -1923,7 +1965,7 @@ static void e1000_set_multi(struct net_device *netdev)
mc_ptr = mc_ptr->next;
}
- e1000_mc_addr_list_update(hw, mta_list, i, 1,
+ e1000_update_mc_addr_list(hw, mta_list, i, 1,
mac->rar_entry_count);
kfree(mta_list);
} else {
@@ -1931,13 +1973,12 @@ static void e1000_set_multi(struct net_device *netdev)
* if we're called from probe, we might not have
* anything to do here, so clear out the list
*/
- e1000_mc_addr_list_update(hw, NULL, 0, 1,
- mac->rar_entry_count);
+ e1000_update_mc_addr_list(hw, NULL, 0, 1, mac->rar_entry_count);
}
}
/**
- * e1000_configure - configure the hardware for RX and TX
+ * e1000_configure - configure the hardware for Rx and Tx
* @adapter: private board structure
**/
static void e1000_configure(struct e1000_adapter *adapter)
@@ -1950,8 +1991,7 @@ static void e1000_configure(struct e1000_adapter *adapter)
e1000_configure_tx(adapter);
e1000_setup_rctl(adapter);
e1000_configure_rx(adapter);
- adapter->alloc_rx_buf(adapter,
- e1000_desc_unused(adapter->rx_ring));
+ adapter->alloc_rx_buf(adapter, e1000_desc_unused(adapter->rx_ring));
}
/**
@@ -1967,9 +2007,11 @@ void e1000e_power_up_phy(struct e1000_adapter *adapter)
u16 mii_reg = 0;
/* Just clear the power down bit to wake the phy back up */
- if (adapter->hw.media_type == e1000_media_type_copper) {
- /* according to the manual, the phy will retain its
- * settings across a power-down/up cycle */
+ if (adapter->hw.phy.media_type == e1000_media_type_copper) {
+ /*
+ * According to the manual, the phy will retain its
+ * settings across a power-down/up cycle
+ */
e1e_rphy(&adapter->hw, PHY_CONTROL, &mii_reg);
mii_reg &= ~MII_CR_POWER_DOWN;
e1e_wphy(&adapter->hw, PHY_CONTROL, mii_reg);
@@ -1994,12 +2036,11 @@ static void e1000_power_down_phy(struct e1000_adapter *adapter)
return;
/* non-copper PHY? */
- if (adapter->hw.media_type != e1000_media_type_copper)
+ if (adapter->hw.phy.media_type != e1000_media_type_copper)
return;
/* reset is blocked because of a SoL/IDER session */
- if (e1000e_check_mng_mode(hw) ||
- e1000_check_reset_block(hw))
+ if (e1000e_check_mng_mode(hw) || e1000_check_reset_block(hw))
return;
/* manageability (AMT) is enabled */
@@ -2019,51 +2060,61 @@ static void e1000_power_down_phy(struct e1000_adapter *adapter)
* This function boots the hardware and enables some settings that
* require a configuration cycle of the hardware - those cannot be
* set/changed during runtime. After reset the device needs to be
- * properly configured for rx, tx etc.
+ * properly configured for Rx, Tx etc.
*/
void e1000e_reset(struct e1000_adapter *adapter)
{
struct e1000_mac_info *mac = &adapter->hw.mac;
+ struct e1000_fc_info *fc = &adapter->hw.fc;
struct e1000_hw *hw = &adapter->hw;
u32 tx_space, min_tx_space, min_rx_space;
- u32 pba;
+ u32 pba = adapter->pba;
u16 hwm;
- ew32(PBA, adapter->pba);
+ /* reset Packet Buffer Allocation to default */
+ ew32(PBA, pba);
- if (mac->max_frame_size > ETH_FRAME_LEN + ETH_FCS_LEN ) {
- /* To maintain wire speed transmits, the Tx FIFO should be
+ if (adapter->max_frame_size > ETH_FRAME_LEN + ETH_FCS_LEN) {
+ /*
+ * To maintain wire speed transmits, the Tx FIFO should be
* large enough to accommodate two full transmit packets,
* rounded up to the next 1KB and expressed in KB. Likewise,
* the Rx FIFO should be large enough to accommodate at least
* one full receive packet and is similarly rounded up and
- * expressed in KB. */
+ * expressed in KB.
+ */
pba = er32(PBA);
/* upper 16 bits has Tx packet buffer allocation size in KB */
tx_space = pba >> 16;
/* lower 16 bits has Rx packet buffer allocation size in KB */
pba &= 0xffff;
- /* the tx fifo also stores 16 bytes of information about the tx
- * but don't include ethernet FCS because hardware appends it */
- min_tx_space = (mac->max_frame_size +
+ /*
+ * the Tx fifo also stores 16 bytes of information about the tx
+ * but don't include ethernet FCS because hardware appends it
+ */
+ min_tx_space = (adapter->max_frame_size +
sizeof(struct e1000_tx_desc) -
ETH_FCS_LEN) * 2;
min_tx_space = ALIGN(min_tx_space, 1024);
min_tx_space >>= 10;
/* software strips receive CRC, so leave room for it */
- min_rx_space = mac->max_frame_size;
+ min_rx_space = adapter->max_frame_size;
min_rx_space = ALIGN(min_rx_space, 1024);
min_rx_space >>= 10;
- /* If current Tx allocation is less than the min Tx FIFO size,
+ /*
+ * If current Tx allocation is less than the min Tx FIFO size,
* and the min Tx FIFO size is less than the current Rx FIFO
- * allocation, take space away from current Rx allocation */
+ * allocation, take space away from current Rx allocation
+ */
if ((tx_space < min_tx_space) &&
((min_tx_space - tx_space) < pba)) {
pba -= min_tx_space - tx_space;
- /* if short on rx space, rx wins and must trump tx
- * adjustment or use Early Receive if available */
+ /*
+ * if short on Rx space, Rx wins and must trump tx
+ * adjustment or use Early Receive if available
+ */
if ((pba < min_rx_space) &&
(!(adapter->flags & FLAG_HAS_ERT)))
/* ERT enabled in e1000_configure_rx */
@@ -2074,29 +2125,33 @@ void e1000e_reset(struct e1000_adapter *adapter)
}
- /* flow control settings */
- /* The high water mark must be low enough to fit one full frame
+ /*
+ * flow control settings
+ *
+ * The high water mark must be low enough to fit one full frame
* (or the size used for early receive) above it in the Rx FIFO.
* Set it to the lower of:
* - 90% of the Rx FIFO size, and
* - the full Rx FIFO size minus the early receive size (for parts
* with ERT support assuming ERT set to E1000_ERT_2048), or
- * - the full Rx FIFO size minus one full frame */
+ * - the full Rx FIFO size minus one full frame
+ */
if (adapter->flags & FLAG_HAS_ERT)
- hwm = min(((adapter->pba << 10) * 9 / 10),
- ((adapter->pba << 10) - (E1000_ERT_2048 << 3)));
+ hwm = min(((pba << 10) * 9 / 10),
+ ((pba << 10) - (E1000_ERT_2048 << 3)));
else
- hwm = min(((adapter->pba << 10) * 9 / 10),
- ((adapter->pba << 10) - mac->max_frame_size));
+ hwm = min(((pba << 10) * 9 / 10),
+ ((pba << 10) - adapter->max_frame_size));
- mac->fc_high_water = hwm & 0xFFF8; /* 8-byte granularity */
- mac->fc_low_water = mac->fc_high_water - 8;
+ fc->high_water = hwm & 0xFFF8; /* 8-byte granularity */
+ fc->low_water = fc->high_water - 8;
if (adapter->flags & FLAG_DISABLE_FC_PAUSE_TIME)
- mac->fc_pause_time = 0xFFFF;
+ fc->pause_time = 0xFFFF;
else
- mac->fc_pause_time = E1000_FC_PAUSE_TIME;
- mac->fc = mac->original_fc;
+ fc->pause_time = E1000_FC_PAUSE_TIME;
+ fc->send_xon = 1;
+ fc->type = fc->original_type;
/* Allow time for pending master requests to run */
mac->ops.reset_hw(hw);
@@ -2115,9 +2170,11 @@ void e1000e_reset(struct e1000_adapter *adapter)
if (!(adapter->flags & FLAG_SMART_POWER_DOWN)) {
u16 phy_data = 0;
- /* speed up time to link by disabling smart power down, ignore
+ /*
+ * speed up time to link by disabling smart power down, ignore
* the return value of this function because there is nothing
- * different we would do if it failed */
+ * different we would do if it failed
+ */
e1e_rphy(hw, IGP02E1000_PHY_POWER_MGMT, &phy_data);
phy_data &= ~IGP02E1000_PM_SPD;
e1e_wphy(hw, IGP02E1000_PHY_POWER_MGMT, phy_data);
@@ -2147,8 +2204,10 @@ void e1000e_down(struct e1000_adapter *adapter)
struct e1000_hw *hw = &adapter->hw;
u32 tctl, rctl;
- /* signal that we're down so the interrupt handler does not
- * reschedule our watchdog timer */
+ /*
+ * signal that we're down so the interrupt handler does not
+ * reschedule our watchdog timer
+ */
set_bit(__E1000_DOWN, &adapter->state);
/* disable receives in the hardware */
@@ -2167,7 +2226,6 @@ void e1000e_down(struct e1000_adapter *adapter)
msleep(10);
napi_disable(&adapter->napi);
- atomic_set(&adapter->irq_sem, 0);
e1000_irq_disable(adapter);
del_timer_sync(&adapter->watchdog_timer);
@@ -2208,13 +2266,12 @@ void e1000e_reinit_locked(struct e1000_adapter *adapter)
**/
static int __devinit e1000_sw_init(struct e1000_adapter *adapter)
{
- struct e1000_hw *hw = &adapter->hw;
struct net_device *netdev = adapter->netdev;
adapter->rx_buffer_len = ETH_FRAME_LEN + VLAN_HLEN + ETH_FCS_LEN;
adapter->rx_ps_bsize0 = 128;
- hw->mac.max_frame_size = netdev->mtu + ETH_HLEN + ETH_FCS_LEN;
- hw->mac.min_frame_size = ETH_ZLEN + ETH_FCS_LEN;
+ adapter->max_frame_size = netdev->mtu + ETH_HLEN + ETH_FCS_LEN;
+ adapter->min_frame_size = ETH_ZLEN + ETH_FCS_LEN;
adapter->tx_ring = kzalloc(sizeof(struct e1000_ring), GFP_KERNEL);
if (!adapter->tx_ring)
@@ -2227,7 +2284,6 @@ static int __devinit e1000_sw_init(struct e1000_adapter *adapter)
spin_lock_init(&adapter->tx_queue_lock);
/* Explicitly disable IRQ since the NIC can be in any state. */
- atomic_set(&adapter->irq_sem, 0);
e1000_irq_disable(adapter);
spin_lock_init(&adapter->stats_lock);
@@ -2281,16 +2337,20 @@ static int e1000_open(struct net_device *netdev)
E1000_MNG_DHCP_COOKIE_STATUS_VLAN))
e1000_update_mng_vlan(adapter);
- /* If AMT is enabled, let the firmware know that the network
- * interface is now open */
+ /*
+ * If AMT is enabled, let the firmware know that the network
+ * interface is now open
+ */
if ((adapter->flags & FLAG_HAS_AMT) &&
e1000e_check_mng_mode(&adapter->hw))
e1000_get_hw_control(adapter);
- /* before we allocate an interrupt, we must be ready to handle it.
+ /*
+ * before we allocate an interrupt, we must be ready to handle it.
* Setting DEBUG_SHIRQ in the kernel makes it fire an interrupt
* as soon as we call pci_request_irq, so we have to setup our
- * clean_rx handler before we do so. */
+ * clean_rx handler before we do so.
+ */
e1000_configure(adapter);
err = e1000_request_irq(adapter);
@@ -2344,16 +2404,20 @@ static int e1000_close(struct net_device *netdev)
e1000e_free_tx_resources(adapter);
e1000e_free_rx_resources(adapter);
- /* kill manageability vlan ID if supported, but not if a vlan with
- * the same ID is registered on the host OS (let 8021q kill it) */
+ /*
+ * kill manageability vlan ID if supported, but not if a vlan with
+ * the same ID is registered on the host OS (let 8021q kill it)
+ */
if ((adapter->hw.mng_cookie.status &
E1000_MNG_DHCP_COOKIE_STATUS_VLAN) &&
!(adapter->vlgrp &&
vlan_group_get_device(adapter->vlgrp, adapter->mng_vlan_id)))
e1000_vlan_rx_kill_vid(netdev, adapter->mng_vlan_id);
- /* If AMT is enabled, let the firmware know that the network
- * interface is now closed */
+ /*
+ * If AMT is enabled, let the firmware know that the network
+ * interface is now closed
+ */
if ((adapter->flags & FLAG_HAS_AMT) &&
e1000e_check_mng_mode(&adapter->hw))
e1000_release_hw_control(adapter);
@@ -2384,12 +2448,14 @@ static int e1000_set_mac(struct net_device *netdev, void *p)
/* activate the work around */
e1000e_set_laa_state_82571(&adapter->hw, 1);
- /* Hold a copy of the LAA in RAR[14] This is done so that
+ /*
+ * Hold a copy of the LAA in RAR[14] This is done so that
* between the time RAR[0] gets clobbered and the time it
* gets fixed (in e1000_watchdog), the actual LAA is in one
* of the RARs and no incoming packets directed to this port
* are dropped. Eventually the LAA will be in RAR[0] and
- * RAR[14] */
+ * RAR[14]
+ */
e1000e_rar_set(&adapter->hw,
adapter->hw.mac.addr,
adapter->hw.mac.rar_entry_count - 1);
@@ -2398,8 +2464,10 @@ static int e1000_set_mac(struct net_device *netdev, void *p)
return 0;
}
-/* Need to wait a few seconds after link up to get diagnostic information from
- * the phy */
+/*
+ * Need to wait a few seconds after link up to get diagnostic information from
+ * the phy
+ */
static void e1000_update_phy_info(unsigned long data)
{
struct e1000_adapter *adapter = (struct e1000_adapter *) data;
@@ -2430,7 +2498,8 @@ void e1000e_update_stats(struct e1000_adapter *adapter)
spin_lock_irqsave(&adapter->stats_lock, irq_flags);
- /* these counters are modified from e1000_adjust_tbi_stats,
+ /*
+ * these counters are modified from e1000_adjust_tbi_stats,
* called from the interrupt context, so they must only
* be written while holding adapter->stats_lock
*/
@@ -2524,8 +2593,10 @@ void e1000e_update_stats(struct e1000_adapter *adapter)
/* Rx Errors */
- /* RLEC on some newer hardware can be incorrect so build
- * our own version based on RUC and ROC */
+ /*
+ * RLEC on some newer hardware can be incorrect so build
+ * our own version based on RUC and ROC
+ */
adapter->net_stats.rx_errors = adapter->stats.rxerrc +
adapter->stats.crcerrs + adapter->stats.algnerrc +
adapter->stats.ruc + adapter->stats.roc +
@@ -2546,7 +2617,7 @@ void e1000e_update_stats(struct e1000_adapter *adapter)
/* Tx Dropped needs to be maintained elsewhere */
/* Phy Stats */
- if (hw->media_type == e1000_media_type_copper) {
+ if (hw->phy.media_type == e1000_media_type_copper) {
if ((adapter->link_speed == SPEED_1000) &&
(!e1e_rphy(hw, PHY_1000T_STATUS, &phy_tmp))) {
phy_tmp &= PHY_IDLE_ERROR_COUNT_MASK;
@@ -2564,8 +2635,8 @@ void e1000e_update_stats(struct e1000_adapter *adapter)
static void e1000_print_link_info(struct e1000_adapter *adapter)
{
- struct net_device *netdev = adapter->netdev;
struct e1000_hw *hw = &adapter->hw;
+ struct net_device *netdev = adapter->netdev;
u32 ctrl = er32(CTRL);
ndev_info(netdev,
@@ -2579,6 +2650,62 @@ static void e1000_print_link_info(struct e1000_adapter *adapter)
((ctrl & E1000_CTRL_TFCE) ? "TX" : "None" )));
}
+static bool e1000_has_link(struct e1000_adapter *adapter)
+{
+ struct e1000_hw *hw = &adapter->hw;
+ bool link_active = 0;
+ s32 ret_val = 0;
+
+ /*
+ * get_link_status is set on LSC (link status) interrupt or
+ * Rx sequence error interrupt. get_link_status will stay
+ * false until the check_for_link establishes link
+ * for copper adapters ONLY
+ */
+ switch (hw->phy.media_type) {
+ case e1000_media_type_copper:
+ if (hw->mac.get_link_status) {
+ ret_val = hw->mac.ops.check_for_link(hw);
+ link_active = !hw->mac.get_link_status;
+ } else {
+ link_active = 1;
+ }
+ break;
+ case e1000_media_type_fiber:
+ ret_val = hw->mac.ops.check_for_link(hw);
+ link_active = !!(er32(STATUS) & E1000_STATUS_LU);
+ break;
+ case e1000_media_type_internal_serdes:
+ ret_val = hw->mac.ops.check_for_link(hw);
+ link_active = adapter->hw.mac.serdes_has_link;
+ break;
+ default:
+ case e1000_media_type_unknown:
+ break;
+ }
+
+ if ((ret_val == E1000_ERR_PHY) && (hw->phy.type == e1000_phy_igp_3) &&
+ (er32(CTRL) & E1000_PHY_CTRL_GBE_DISABLE)) {
+ /* See e1000_kmrn_lock_loss_workaround_ich8lan() */
+ ndev_info(adapter->netdev,
+ "Gigabit has been disabled, downgrading speed\n");
+ }
+
+ return link_active;
+}
+
+static void e1000e_enable_receives(struct e1000_adapter *adapter)
+{
+ /* make sure the receive unit is started */
+ if ((adapter->flags & FLAG_RX_NEEDS_RESTART) &&
+ (adapter->flags & FLAG_RX_RESTART_NOW)) {
+ struct e1000_hw *hw = &adapter->hw;
+ u32 rctl = er32(RCTL);
+ ew32(RCTL, rctl | E1000_RCTL_EN);
+ adapter->flags &= ~FLAG_RX_RESTART_NOW;
+ }
+}
+
/**
* e1000_watchdog - Timer Call-back
* @data: pointer to adapter cast into an unsigned long
@@ -2597,48 +2724,35 @@ static void e1000_watchdog_task(struct work_struct *work)
{
struct e1000_adapter *adapter = container_of(work,
struct e1000_adapter, watchdog_task);
-
struct net_device *netdev = adapter->netdev;
struct e1000_mac_info *mac = &adapter->hw.mac;
struct e1000_ring *tx_ring = adapter->tx_ring;
struct e1000_hw *hw = &adapter->hw;
u32 link, tctl;
- s32 ret_val;
int tx_pending = 0;
- if ((netif_carrier_ok(netdev)) &&
- (er32(STATUS) & E1000_STATUS_LU))
+ link = e1000_has_link(adapter);
+ if ((netif_carrier_ok(netdev)) && link) {
+ e1000e_enable_receives(adapter);
goto link_up;
-
- ret_val = mac->ops.check_for_link(hw);
- if ((ret_val == E1000_ERR_PHY) &&
- (adapter->hw.phy.type == e1000_phy_igp_3) &&
- (er32(CTRL) &
- E1000_PHY_CTRL_GBE_DISABLE)) {
- /* See e1000_kmrn_lock_loss_workaround_ich8lan() */
- ndev_info(netdev,
- "Gigabit has been disabled, downgrading speed\n");
}
if ((e1000e_enable_tx_pkt_filtering(hw)) &&
(adapter->mng_vlan_id != adapter->hw.mng_cookie.vlan_id))
e1000_update_mng_vlan(adapter);
- if ((adapter->hw.media_type == e1000_media_type_internal_serdes) &&
- !(er32(TXCW) & E1000_TXCW_ANE))
- link = adapter->hw.mac.serdes_has_link;
- else
- link = er32(STATUS) & E1000_STATUS_LU;
-
if (link) {
if (!netif_carrier_ok(netdev)) {
bool txb2b = 1;
+ /* update snapshot of PHY registers on LSC */
mac->ops.get_link_up_info(&adapter->hw,
&adapter->link_speed,
&adapter->link_duplex);
e1000_print_link_info(adapter);
- /* tweak tx_queue_len according to speed/duplex
- * and adjust the timeout factor */
+ /*
+ * tweak tx_queue_len according to speed/duplex
+ * and adjust the timeout factor
+ */
netdev->tx_queue_len = adapter->tx_queue_len;
adapter->tx_timeout_factor = 1;
switch (adapter->link_speed) {
@@ -2654,18 +2768,22 @@ static void e1000_watchdog_task(struct work_struct *work)
break;
}
- /* workaround: re-program speed mode bit after
- * link-up event */
+ /*
+ * workaround: re-program speed mode bit after
+ * link-up event
+ */
if ((adapter->flags & FLAG_TARC_SPEED_MODE_BIT) &&
!txb2b) {
u32 tarc0;
- tarc0 = er32(TARC0);
+ tarc0 = er32(TARC(0));
tarc0 &= ~SPEED_MODE_BIT;
- ew32(TARC0, tarc0);
+ ew32(TARC(0), tarc0);
}
- /* disable TSO for pcie and 10/100 speeds, to avoid
- * some hardware issues */
+ /*
+ * disable TSO for pcie and 10/100 speeds, to avoid
+ * some hardware issues
+ */
if (!(adapter->flags & FLAG_TSO_FORCE)) {
switch (adapter->link_speed) {
case SPEED_10:
@@ -2685,8 +2803,10 @@ static void e1000_watchdog_task(struct work_struct *work)
}
}
- /* enable transmits in the hardware, need to do this
- * after setting TARC0 */
+ /*
+ * enable transmits in the hardware, need to do this
+ * after setting TARC(0)
+ */
tctl = er32(TCTL);
tctl |= E1000_TCTL_EN;
ew32(TCTL, tctl);
@@ -2697,13 +2817,6 @@ static void e1000_watchdog_task(struct work_struct *work)
if (!test_bit(__E1000_DOWN, &adapter->state))
mod_timer(&adapter->phy_info_timer,
round_jiffies(jiffies + 2 * HZ));
- } else {
- /* make sure the receive unit is started */
- if (adapter->flags & FLAG_RX_NEEDS_RESTART) {
- u32 rctl = er32(RCTL);
- ew32(RCTL, rctl |
- E1000_RCTL_EN);
- }
}
} else {
if (netif_carrier_ok(netdev)) {
@@ -2740,23 +2853,27 @@ link_up:
tx_pending = (e1000_desc_unused(tx_ring) + 1 <
tx_ring->count);
if (tx_pending) {
- /* We've lost link, so the controller stops DMA,
+ /*
+ * We've lost link, so the controller stops DMA,
* but we've got queued Tx work that's never going
* to get done, so reset controller to flush Tx.
- * (Do the reset outside of interrupt context). */
+ * (Do the reset outside of interrupt context).
+ */
adapter->tx_timeout_count++;
schedule_work(&adapter->reset_task);
}
}
- /* Cause software interrupt to ensure rx ring is cleaned */
+ /* Cause software interrupt to ensure Rx ring is cleaned */
ew32(ICS, E1000_ICS_RXDMT0);
/* Force detection of hung controller every watchdog period */
adapter->detect_tx_hung = 1;
- /* With 82571 controllers, LAA may be overwritten due to controller
- * reset from the other port. Set the appropriate LAA in RAR[0] */
+ /*
+ * With 82571 controllers, LAA may be overwritten due to controller
+ * reset from the other port. Set the appropriate LAA in RAR[0]
+ */
if (e1000e_get_laa_state_82571(hw))
e1000e_rar_set(hw, adapter->hw.mac.addr, 0);
@@ -3032,16 +3149,20 @@ static void e1000_tx_queue(struct e1000_adapter *adapter,
tx_desc->lower.data |= cpu_to_le32(adapter->txd_cmd);
- /* Force memory writes to complete before letting h/w
+ /*
+ * Force memory writes to complete before letting h/w
* know there are new descriptors to fetch. (Only
* applicable for weak-ordered memory model archs,
- * such as IA-64). */
+ * such as IA-64).
+ */
wmb();
tx_ring->next_to_use = i;
writel(i, adapter->hw.hw_addr + tx_ring->tail);
- /* we need this if more than one processor can write to our tail
- * at a time, it synchronizes IO on IA64/Altix systems */
+ /*
+ * we need this if more than one processor can write to our tail
+ * at a time, it synchronizes IO on IA64/Altix systems
+ */
mmiowb();
}
@@ -3089,13 +3210,17 @@ static int __e1000_maybe_stop_tx(struct net_device *netdev, int size)
struct e1000_adapter *adapter = netdev_priv(netdev);
netif_stop_queue(netdev);
- /* Herbert's original patch had:
+ /*
+ * Herbert's original patch had:
* smp_mb__after_netif_stop_queue();
- * but since that doesn't exist yet, just open code it. */
+ * but since that doesn't exist yet, just open code it.
+ */
smp_mb();
- /* We need to check again in a case another CPU has just
- * made room available. */
+ /*
+ * We need to check again in a case another CPU has just
+ * made room available.
+ */
if (e1000_desc_unused(adapter->tx_ring) < size)
return -EBUSY;
@@ -3142,21 +3267,29 @@ static int e1000_xmit_frame(struct sk_buff *skb, struct net_device *netdev)
}
mss = skb_shinfo(skb)->gso_size;
- /* The controller does a simple calculation to
+ /*
+ * The controller does a simple calculation to
* make sure there is enough room in the FIFO before
* initiating the DMA for each buffer. The calc is:
* 4 = ceil(buffer len/mss). To make sure we don't
* overrun the FIFO, adjust the max buffer len if mss
- * drops. */
+ * drops.
+ */
if (mss) {
u8 hdr_len;
max_per_txd = min(mss << 2, max_per_txd);
max_txd_pwr = fls(max_per_txd) - 1;
- /* TSO Workaround for 82571/2/3 Controllers -- if skb->data
- * points to just header, pull a few bytes of payload from
- * frags into skb->data */
+ /*
+ * TSO Workaround for 82571/2/3 Controllers -- if skb->data
+ * points to just header, pull a few bytes of payload from
+ * frags into skb->data
+ */
hdr_len = skb_transport_offset(skb) + tcp_hdrlen(skb);
+ /*
+ * we do this workaround for ES2LAN, but it is un-necessary,
+ * avoiding it could save a lot of cycles
+ */
if (skb->data_len && (hdr_len == len)) {
unsigned int pull_size;
@@ -3190,8 +3323,10 @@ static int e1000_xmit_frame(struct sk_buff *skb, struct net_device *netdev)
/* Collision - tell upper layer to requeue */
return NETDEV_TX_LOCKED;
- /* need: count + 2 desc gap to keep tail from touching
- * head, otherwise try next time */
+ /*
+ * need: count + 2 desc gap to keep tail from touching
+ * head, otherwise try next time
+ */
if (e1000_maybe_stop_tx(netdev, count + 2)) {
spin_unlock_irqrestore(&adapter->tx_queue_lock, irq_flags);
return NETDEV_TX_BUSY;
@@ -3216,9 +3351,11 @@ static int e1000_xmit_frame(struct sk_buff *skb, struct net_device *netdev)
else if (e1000_tx_csum(adapter, skb))
tx_flags |= E1000_TX_FLAGS_CSUM;
- /* Old method was to assume IPv4 packet by default if TSO was enabled.
+ /*
+ * Old method was to assume IPv4 packet by default if TSO was enabled.
* 82571 hardware supports TSO capabilities for IPv6 as well...
- * no longer assume, we must. */
+ * no longer assume, we must.
+ */
if (skb->protocol == htons(ETH_P_IP))
tx_flags |= E1000_TX_FLAGS_IPV4;
@@ -3316,14 +3453,16 @@ static int e1000_change_mtu(struct net_device *netdev, int new_mtu)
while (test_and_set_bit(__E1000_RESETTING, &adapter->state))
msleep(1);
/* e1000e_down has a dependency on max_frame_size */
- adapter->hw.mac.max_frame_size = max_frame;
+ adapter->max_frame_size = max_frame;
if (netif_running(netdev))
e1000e_down(adapter);
- /* NOTE: netdev_alloc_skb reserves 16 bytes, and typically NET_IP_ALIGN
+ /*
+ * NOTE: netdev_alloc_skb reserves 16 bytes, and typically NET_IP_ALIGN
* means we reserve 2 more, this pushes us to allocate from the next
* larger slab size.
- * i.e. RXBUFFER_2048 --> size-4096 slab */
+ * i.e. RXBUFFER_2048 --> size-4096 slab
+ */
if (max_frame <= 256)
adapter->rx_buffer_len = 256;
@@ -3340,7 +3479,7 @@ static int e1000_change_mtu(struct net_device *netdev, int new_mtu)
if ((max_frame == ETH_FRAME_LEN + ETH_FCS_LEN) ||
(max_frame == ETH_FRAME_LEN + VLAN_HLEN + ETH_FCS_LEN))
adapter->rx_buffer_len = ETH_FRAME_LEN + VLAN_HLEN
- + ETH_FCS_LEN ;
+ + ETH_FCS_LEN;
ndev_info(netdev, "changing MTU from %d to %d\n",
netdev->mtu, new_mtu);
@@ -3363,7 +3502,7 @@ static int e1000_mii_ioctl(struct net_device *netdev, struct ifreq *ifr,
struct mii_ioctl_data *data = if_mii(ifr);
unsigned long irq_flags;
- if (adapter->hw.media_type != e1000_media_type_copper)
+ if (adapter->hw.phy.media_type != e1000_media_type_copper)
return -EOPNOTSUPP;
switch (cmd) {
@@ -3445,8 +3584,9 @@ static int e1000_suspend(struct pci_dev *pdev, pm_message_t state)
E1000_CTRL_EN_PHY_PWR_MGMT;
ew32(CTRL, ctrl);
- if (adapter->hw.media_type == e1000_media_type_fiber ||
- adapter->hw.media_type == e1000_media_type_internal_serdes) {
+ if (adapter->hw.phy.media_type == e1000_media_type_fiber ||
+ adapter->hw.phy.media_type ==
+ e1000_media_type_internal_serdes) {
/* keep the laser running in D3 */
ctrl_ext = er32(CTRL_EXT);
ctrl_ext |= E1000_CTRL_EXT_SDP7_DATA;
@@ -3476,8 +3616,10 @@ static int e1000_suspend(struct pci_dev *pdev, pm_message_t state)
if (adapter->hw.phy.type == e1000_phy_igp_3)
e1000e_igp3_phy_powerdown_workaround_ich8lan(&adapter->hw);
- /* Release control of h/w to f/w. If f/w is AMT enabled, this
- * would have already happened in close and is redundant. */
+ /*
+ * Release control of h/w to f/w. If f/w is AMT enabled, this
+ * would have already happened in close and is redundant.
+ */
e1000_release_hw_control(adapter);
pci_disable_device(pdev);
@@ -3552,9 +3694,11 @@ static int e1000_resume(struct pci_dev *pdev)
netif_device_attach(netdev);
- /* If the controller has AMT, do not set DRV_LOAD until the interface
+ /*
+ * If the controller has AMT, do not set DRV_LOAD until the interface
* is up. For all other cases, let the f/w know that the h/w is now
- * under the control of the driver. */
+ * under the control of the driver.
+ */
if (!(adapter->flags & FLAG_HAS_AMT) || !e1000e_check_mng_mode(&adapter->hw))
e1000_get_hw_control(adapter);
@@ -3665,9 +3809,11 @@ static void e1000_io_resume(struct pci_dev *pdev)
netif_device_attach(netdev);
- /* If the controller has AMT, do not set DRV_LOAD until the interface
+ /*
+ * If the controller has AMT, do not set DRV_LOAD until the interface
* is up. For all other cases, let the f/w know that the h/w is now
- * under the control of the driver. */
+ * under the control of the driver.
+ */
if (!(adapter->flags & FLAG_HAS_AMT) ||
!e1000e_check_mng_mode(&adapter->hw))
e1000_get_hw_control(adapter);
@@ -3678,7 +3824,7 @@ static void e1000_print_device_info(struct e1000_adapter *adapter)
{
struct e1000_hw *hw = &adapter->hw;
struct net_device *netdev = adapter->netdev;
- u32 part_num;
+ u32 pba_num;
/* print bus type/speed/width info */
ndev_info(netdev, "(PCI Express:2.5GB/s:%s) "
@@ -3693,10 +3839,10 @@ static void e1000_print_device_info(struct e1000_adapter *adapter)
ndev_info(netdev, "Intel(R) PRO/%s Network Connection\n",
(hw->phy.type == e1000_phy_ife)
? "10/100" : "1000");
- e1000e_read_part_num(hw, &part_num);
+ e1000e_read_pba_num(hw, &pba_num);
ndev_info(netdev, "MAC: %d, PHY: %d, PBA No: %06x-%03x\n",
hw->mac.type, hw->phy.type,
- (part_num >> 8), (part_num & 0xff));
+ (pba_num >> 8), (pba_num & 0xff));
}
/**
@@ -3828,16 +3974,16 @@ static int __devinit e1000_probe(struct pci_dev *pdev,
memcpy(&hw->nvm.ops, ei->nvm_ops, sizeof(hw->nvm.ops));
memcpy(&hw->phy.ops, ei->phy_ops, sizeof(hw->phy.ops));
- err = ei->get_invariants(adapter);
+ err = ei->get_variants(adapter);
if (err)
goto err_hw_init;
hw->mac.ops.get_bus_info(&adapter->hw);
- adapter->hw.phy.wait_for_link = 0;
+ adapter->hw.phy.autoneg_wait_to_complete = 0;
/* Copper options */
- if (adapter->hw.media_type == e1000_media_type_copper) {
+ if (adapter->hw.phy.media_type == e1000_media_type_copper) {
adapter->hw.phy.mdix = AUTO_ALL_MODES;
adapter->hw.phy.disable_polarity_correction = 0;
adapter->hw.phy.ms_type = e1000_ms_hw_default;
@@ -3861,15 +4007,19 @@ static int __devinit e1000_probe(struct pci_dev *pdev,
if (pci_using_dac)
netdev->features |= NETIF_F_HIGHDMA;
- /* We should not be using LLTX anymore, but we are still TX faster with
- * it. */
+ /*
+ * We should not be using LLTX anymore, but we are still Tx faster with
+ * it.
+ */
netdev->features |= NETIF_F_LLTX;
if (e1000e_enable_mng_pass_thru(&adapter->hw))
adapter->flags |= FLAG_MNG_PT_ENABLED;
- /* before reading the NVM, reset the controller to
- * put the device in a known good starting state */
+ /*
+ * before reading the NVM, reset the controller to
+ * put the device in a known good starting state
+ */
adapter->hw.mac.ops.reset_hw(&adapter->hw);
/*
@@ -3919,8 +4069,8 @@ static int __devinit e1000_probe(struct pci_dev *pdev,
/* Initialize link parameters. User can change them with ethtool */
adapter->hw.mac.autoneg = 1;
adapter->fc_autoneg = 1;
- adapter->hw.mac.original_fc = e1000_fc_default;
- adapter->hw.mac.fc = e1000_fc_default;
+ adapter->hw.fc.original_type = e1000_fc_default;
+ adapter->hw.fc.type = e1000_fc_default;
adapter->hw.phy.autoneg_advertised = 0x2f;
/* ring size defaults */
@@ -3963,9 +4113,11 @@ static int __devinit e1000_probe(struct pci_dev *pdev,
/* reset the hardware with the new settings */
e1000e_reset(adapter);
- /* If the controller has AMT, do not set DRV_LOAD until the interface
+ /*
+ * If the controller has AMT, do not set DRV_LOAD until the interface
* is up. For all other cases, let the f/w know that the h/w is now
- * under the control of the driver. */
+ * under the control of the driver.
+ */
if (!(adapter->flags & FLAG_HAS_AMT) ||
!e1000e_check_mng_mode(&adapter->hw))
e1000_get_hw_control(adapter);
@@ -4022,16 +4174,20 @@ static void __devexit e1000_remove(struct pci_dev *pdev)
struct net_device *netdev = pci_get_drvdata(pdev);
struct e1000_adapter *adapter = netdev_priv(netdev);
- /* flush_scheduled work may reschedule our watchdog task, so
- * explicitly disable watchdog tasks from being rescheduled */
+ /*
+ * flush_scheduled work may reschedule our watchdog task, so
+ * explicitly disable watchdog tasks from being rescheduled
+ */
set_bit(__E1000_DOWN, &adapter->state);
del_timer_sync(&adapter->watchdog_timer);
del_timer_sync(&adapter->phy_info_timer);
flush_scheduled_work();
- /* Release control of h/w to f/w. If f/w is AMT enabled, this
- * would have already happened in close and is redundant. */
+ /*
+ * Release control of h/w to f/w. If f/w is AMT enabled, this
+ * would have already happened in close and is redundant.
+ */
e1000_release_hw_control(adapter);
unregister_netdev(netdev);
@@ -4069,13 +4225,16 @@ static struct pci_device_id e1000_pci_tbl[] = {
{ PCI_VDEVICE(INTEL, E1000_DEV_ID_82571EB_SERDES_DUAL), board_82571 },
{ PCI_VDEVICE(INTEL, E1000_DEV_ID_82571EB_SERDES_QUAD), board_82571 },
{ PCI_VDEVICE(INTEL, E1000_DEV_ID_82571PT_QUAD_COPPER), board_82571 },
+
{ PCI_VDEVICE(INTEL, E1000_DEV_ID_82572EI), board_82572 },
{ PCI_VDEVICE(INTEL, E1000_DEV_ID_82572EI_COPPER), board_82572 },
{ PCI_VDEVICE(INTEL, E1000_DEV_ID_82572EI_FIBER), board_82572 },
{ PCI_VDEVICE(INTEL, E1000_DEV_ID_82572EI_SERDES), board_82572 },
+
{ PCI_VDEVICE(INTEL, E1000_DEV_ID_82573E), board_82573 },
{ PCI_VDEVICE(INTEL, E1000_DEV_ID_82573E_IAMT), board_82573 },
{ PCI_VDEVICE(INTEL, E1000_DEV_ID_82573L), board_82573 },
+
{ PCI_VDEVICE(INTEL, E1000_DEV_ID_80003ES2LAN_COPPER_DPT),
board_80003es2lan },
{ PCI_VDEVICE(INTEL, E1000_DEV_ID_80003ES2LAN_COPPER_SPT),
@@ -4084,6 +4243,7 @@ static struct pci_device_id e1000_pci_tbl[] = {
board_80003es2lan },
{ PCI_VDEVICE(INTEL, E1000_DEV_ID_80003ES2LAN_SERDES_SPT),
board_80003es2lan },
+
{ PCI_VDEVICE(INTEL, E1000_DEV_ID_ICH8_IFE), board_ich8lan },
{ PCI_VDEVICE(INTEL, E1000_DEV_ID_ICH8_IFE_G), board_ich8lan },
{ PCI_VDEVICE(INTEL, E1000_DEV_ID_ICH8_IFE_GT), board_ich8lan },
@@ -4091,6 +4251,7 @@ static struct pci_device_id e1000_pci_tbl[] = {
{ PCI_VDEVICE(INTEL, E1000_DEV_ID_ICH8_IGP_C), board_ich8lan },
{ PCI_VDEVICE(INTEL, E1000_DEV_ID_ICH8_IGP_M), board_ich8lan },
{ PCI_VDEVICE(INTEL, E1000_DEV_ID_ICH8_IGP_M_AMT), board_ich8lan },
+
{ PCI_VDEVICE(INTEL, E1000_DEV_ID_ICH9_IFE), board_ich9lan },
{ PCI_VDEVICE(INTEL, E1000_DEV_ID_ICH9_IFE_G), board_ich9lan },
{ PCI_VDEVICE(INTEL, E1000_DEV_ID_ICH9_IFE_GT), board_ich9lan },
@@ -4108,7 +4269,7 @@ static struct pci_driver e1000_driver = {
.probe = e1000_probe,
.remove = __devexit_p(e1000_remove),
#ifdef CONFIG_PM
- /* Power Managment Hooks */
+ /* Power Management Hooks */
.suspend = e1000_suspend,
.resume = e1000_resume,
#endif
@@ -4127,7 +4288,7 @@ static int __init e1000_init_module(void)
int ret;
printk(KERN_INFO "%s: Intel(R) PRO/1000 Network Driver - %s\n",
e1000e_driver_name, e1000e_driver_version);
- printk(KERN_INFO "%s: Copyright (c) 1999-2007 Intel Corporation.\n",
+ printk(KERN_INFO "%s: Copyright (c) 1999-2008 Intel Corporation.\n",
e1000e_driver_name);
ret = pci_register_driver(&e1000_driver);