summaryrefslogtreecommitdiffstats
path: root/drivers/net/3c505.c
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/net/3c505.c')
-rw-r--r--drivers/net/3c505.c217
1 files changed, 112 insertions, 105 deletions
diff --git a/drivers/net/3c505.c b/drivers/net/3c505.c
index 2de1c9cd7bd..f71b3540275 100644
--- a/drivers/net/3c505.c
+++ b/drivers/net/3c505.c
@@ -126,26 +126,25 @@
*
*********************************************************/
-static const char filename[] = __FILE__;
+#define filename __FILE__
-static const char timeout_msg[] = "*** timeout at %s:%s (line %d) ***\n";
+#define timeout_msg "*** timeout at %s:%s (line %d) ***\n"
#define TIMEOUT_MSG(lineno) \
- printk(timeout_msg, filename,__func__,(lineno))
+ pr_notice(timeout_msg, filename, __func__, (lineno))
-static const char invalid_pcb_msg[] =
-"*** invalid pcb length %d at %s:%s (line %d) ***\n";
+#define invalid_pcb_msg "*** invalid pcb length %d at %s:%s (line %d) ***\n"
#define INVALID_PCB_MSG(len) \
- printk(invalid_pcb_msg, (len),filename,__func__,__LINE__)
+ pr_notice(invalid_pcb_msg, (len), filename, __func__, __LINE__)
-static char search_msg[] __initdata = KERN_INFO "%s: Looking for 3c505 adapter at address %#x...";
+#define search_msg "%s: Looking for 3c505 adapter at address %#x..."
-static char stilllooking_msg[] __initdata = "still looking...";
+#define stilllooking_msg "still looking..."
-static char found_msg[] __initdata = "found.\n";
+#define found_msg "found.\n"
-static char notfound_msg[] __initdata = "not found (reason = %d)\n";
+#define notfound_msg "not found (reason = %d)\n"
-static char couldnot_msg[] __initdata = KERN_INFO "%s: 3c505 not found\n";
+#define couldnot_msg "%s: 3c505 not found\n"
/*********************************************************
*
@@ -284,7 +283,7 @@ static inline void adapter_reset(struct net_device *dev)
outb_control(orig_hcr, dev);
if (!start_receive(dev, &adapter->tx_pcb))
- printk(KERN_ERR "%s: start receive command failed \n", dev->name);
+ pr_err("%s: start receive command failed\n", dev->name);
}
/* Check to make sure that a DMA transfer hasn't timed out. This should
@@ -296,7 +295,9 @@ static inline void check_3c505_dma(struct net_device *dev)
elp_device *adapter = netdev_priv(dev);
if (adapter->dmaing && time_after(jiffies, adapter->current_dma.start_time + 10)) {
unsigned long flags, f;
- printk(KERN_ERR "%s: DMA %s timed out, %d bytes left\n", dev->name, adapter->current_dma.direction ? "download" : "upload", get_dma_residue(dev->dma));
+ pr_err("%s: DMA %s timed out, %d bytes left\n", dev->name,
+ adapter->current_dma.direction ? "download" : "upload",
+ get_dma_residue(dev->dma));
spin_lock_irqsave(&adapter->lock, flags);
adapter->dmaing = 0;
adapter->busy = 0;
@@ -321,7 +322,7 @@ static inline bool send_pcb_slow(unsigned int base_addr, unsigned char byte)
if (inb_status(base_addr) & HCRE)
return false;
}
- printk(KERN_WARNING "3c505: send_pcb_slow timed out\n");
+ pr_warning("3c505: send_pcb_slow timed out\n");
return true;
}
@@ -333,7 +334,7 @@ static inline bool send_pcb_fast(unsigned int base_addr, unsigned char byte)
if (inb_status(base_addr) & HCRE)
return false;
}
- printk(KERN_WARNING "3c505: send_pcb_fast timed out\n");
+ pr_warning("3c505: send_pcb_fast timed out\n");
return true;
}
@@ -386,7 +387,7 @@ static bool send_pcb(struct net_device *dev, pcb_struct * pcb)
/* Avoid contention */
if (test_and_set_bit(1, &adapter->send_pcb_semaphore)) {
if (elp_debug >= 3) {
- printk(KERN_DEBUG "%s: send_pcb entered while threaded\n", dev->name);
+ pr_debug("%s: send_pcb entered while threaded\n", dev->name);
}
return false;
}
@@ -424,14 +425,15 @@ static bool send_pcb(struct net_device *dev, pcb_struct * pcb)
case ASF_PCB_NAK:
#ifdef ELP_DEBUG
- printk(KERN_DEBUG "%s: send_pcb got NAK\n", dev->name);
+ pr_debug("%s: send_pcb got NAK\n", dev->name);
#endif
goto abort;
}
}
if (elp_debug >= 1)
- printk(KERN_DEBUG "%s: timeout waiting for PCB acknowledge (status %02x)\n", dev->name, inb_status(dev->base_addr));
+ pr_debug("%s: timeout waiting for PCB acknowledge (status %02x)\n",
+ dev->name, inb_status(dev->base_addr));
goto abort;
sti_abort:
@@ -481,7 +483,7 @@ static bool receive_pcb(struct net_device *dev, pcb_struct * pcb)
while (((stat = get_status(dev->base_addr)) & ACRF) == 0 && time_before(jiffies, timeout));
if (time_after_eq(jiffies, timeout)) {
TIMEOUT_MSG(__LINE__);
- printk(KERN_INFO "%s: status %02x\n", dev->name, stat);
+ pr_info("%s: status %02x\n", dev->name, stat);
return false;
}
pcb->length = inb_command(dev->base_addr);
@@ -518,7 +520,7 @@ static bool receive_pcb(struct net_device *dev, pcb_struct * pcb)
/* safety check total length vs data length */
if (total_length != (pcb->length + 2)) {
if (elp_debug >= 2)
- printk(KERN_WARNING "%s: mangled PCB received\n", dev->name);
+ pr_warning("%s: mangled PCB received\n", dev->name);
set_hsf(dev, HSF_PCB_NAK);
return false;
}
@@ -527,7 +529,7 @@ static bool receive_pcb(struct net_device *dev, pcb_struct * pcb)
if (test_and_set_bit(0, (void *) &adapter->busy)) {
if (backlog_next(adapter->rx_backlog.in) == adapter->rx_backlog.out) {
set_hsf(dev, HSF_PCB_NAK);
- printk(KERN_WARNING "%s: PCB rejected, transfer in progress and backlog full\n", dev->name);
+ pr_warning("%s: PCB rejected, transfer in progress and backlog full\n", dev->name);
pcb->command = 0;
return true;
} else {
@@ -552,7 +554,7 @@ static bool start_receive(struct net_device *dev, pcb_struct * tx_pcb)
elp_device *adapter = netdev_priv(dev);
if (elp_debug >= 3)
- printk(KERN_DEBUG "%s: restarting receiver\n", dev->name);
+ pr_debug("%s: restarting receiver\n", dev->name);
tx_pcb->command = CMD_RECEIVE_PACKET;
tx_pcb->length = sizeof(struct Rcv_pkt);
tx_pcb->data.rcv_pkt.buf_seg
@@ -586,7 +588,7 @@ static void receive_packet(struct net_device *dev, int len)
skb = dev_alloc_skb(rlen + 2);
if (!skb) {
- printk(KERN_WARNING "%s: memory squeeze, dropping packet\n", dev->name);
+ pr_warning("%s: memory squeeze, dropping packet\n", dev->name);
target = adapter->dma_buffer;
adapter->current_dma.target = NULL;
/* FIXME: stats */
@@ -604,7 +606,8 @@ static void receive_packet(struct net_device *dev, int len)
/* if this happens, we die */
if (test_and_set_bit(0, (void *) &adapter->dmaing))
- printk(KERN_ERR "%s: rx blocked, DMA in progress, dir %d\n", dev->name, adapter->current_dma.direction);
+ pr_err("%s: rx blocked, DMA in progress, dir %d\n",
+ dev->name, adapter->current_dma.direction);
adapter->current_dma.direction = 0;
adapter->current_dma.length = rlen;
@@ -623,14 +626,14 @@ static void receive_packet(struct net_device *dev, int len)
release_dma_lock(flags);
if (elp_debug >= 3) {
- printk(KERN_DEBUG "%s: rx DMA transfer started\n", dev->name);
+ pr_debug("%s: rx DMA transfer started\n", dev->name);
}
if (adapter->rx_active)
adapter->rx_active--;
if (!adapter->busy)
- printk(KERN_WARNING "%s: receive_packet called, busy not set.\n", dev->name);
+ pr_warning("%s: receive_packet called, busy not set.\n", dev->name);
}
/******************************************************
@@ -655,12 +658,13 @@ static irqreturn_t elp_interrupt(int irq, void *dev_id)
* has a DMA transfer finished?
*/
if (inb_status(dev->base_addr) & DONE) {
- if (!adapter->dmaing) {
- printk(KERN_WARNING "%s: phantom DMA completed\n", dev->name);
- }
- if (elp_debug >= 3) {
- printk(KERN_DEBUG "%s: %s DMA complete, status %02x\n", dev->name, adapter->current_dma.direction ? "tx" : "rx", inb_status(dev->base_addr));
- }
+ if (!adapter->dmaing)
+ pr_warning("%s: phantom DMA completed\n", dev->name);
+
+ if (elp_debug >= 3)
+ pr_debug("%s: %s DMA complete, status %02x\n", dev->name,
+ adapter->current_dma.direction ? "tx" : "rx",
+ inb_status(dev->base_addr));
outb_control(adapter->hcr_val & ~(DMAE | TCEN | DIR), dev);
if (adapter->current_dma.direction) {
@@ -682,7 +686,7 @@ static irqreturn_t elp_interrupt(int irq, void *dev_id)
int t = adapter->rx_backlog.length[adapter->rx_backlog.out];
adapter->rx_backlog.out = backlog_next(adapter->rx_backlog.out);
if (elp_debug >= 2)
- printk(KERN_DEBUG "%s: receiving backlogged packet (%d)\n", dev->name, t);
+ pr_debug("%s: receiving backlogged packet (%d)\n", dev->name, t);
receive_packet(dev, t);
} else {
adapter->busy = 0;
@@ -713,21 +717,23 @@ static irqreturn_t elp_interrupt(int irq, void *dev_id)
len = adapter->irx_pcb.data.rcv_resp.pkt_len;
dlen = adapter->irx_pcb.data.rcv_resp.buf_len;
if (adapter->irx_pcb.data.rcv_resp.timeout != 0) {
- printk(KERN_ERR "%s: interrupt - packet not received correctly\n", dev->name);
+ pr_err("%s: interrupt - packet not received correctly\n", dev->name);
} else {
if (elp_debug >= 3) {
- printk(KERN_DEBUG "%s: interrupt - packet received of length %i (%i)\n", dev->name, len, dlen);
+ pr_debug("%s: interrupt - packet received of length %i (%i)\n",
+ dev->name, len, dlen);
}
if (adapter->irx_pcb.command == 0xff) {
if (elp_debug >= 2)
- printk(KERN_DEBUG "%s: adding packet to backlog (len = %d)\n", dev->name, dlen);
+ pr_debug("%s: adding packet to backlog (len = %d)\n",
+ dev->name, dlen);
adapter->rx_backlog.length[adapter->rx_backlog.in] = dlen;
adapter->rx_backlog.in = backlog_next(adapter->rx_backlog.in);
} else {
receive_packet(dev, dlen);
}
if (elp_debug >= 3)
- printk(KERN_DEBUG "%s: packet received\n", dev->name);
+ pr_debug("%s: packet received\n", dev->name);
}
break;
@@ -737,7 +743,7 @@ static irqreturn_t elp_interrupt(int irq, void *dev_id)
case CMD_CONFIGURE_82586_RESPONSE:
adapter->got[CMD_CONFIGURE_82586] = 1;
if (elp_debug >= 3)
- printk(KERN_DEBUG "%s: interrupt - configure response received\n", dev->name);
+ pr_debug("%s: interrupt - configure response received\n", dev->name);
break;
/*
@@ -746,7 +752,7 @@ static irqreturn_t elp_interrupt(int irq, void *dev_id)
case CMD_CONFIGURE_ADAPTER_RESPONSE:
adapter->got[CMD_CONFIGURE_ADAPTER_MEMORY] = 1;
if (elp_debug >= 3)
- printk(KERN_DEBUG "%s: Adapter memory configuration %s.\n", dev->name,
+ pr_debug("%s: Adapter memory configuration %s.\n", dev->name,
adapter->irx_pcb.data.failed ? "failed" : "succeeded");
break;
@@ -756,7 +762,7 @@ static irqreturn_t elp_interrupt(int irq, void *dev_id)
case CMD_LOAD_MULTICAST_RESPONSE:
adapter->got[CMD_LOAD_MULTICAST_LIST] = 1;
if (elp_debug >= 3)
- printk(KERN_DEBUG "%s: Multicast address list loading %s.\n", dev->name,
+ pr_debug("%s: Multicast address list loading %s.\n", dev->name,
adapter->irx_pcb.data.failed ? "failed" : "succeeded");
break;
@@ -766,7 +772,7 @@ static irqreturn_t elp_interrupt(int irq, void *dev_id)
case CMD_SET_ADDRESS_RESPONSE:
adapter->got[CMD_SET_STATION_ADDRESS] = 1;
if (elp_debug >= 3)
- printk(KERN_DEBUG "%s: Ethernet address setting %s.\n", dev->name,
+ pr_debug("%s: Ethernet address setting %s.\n", dev->name,
adapter->irx_pcb.data.failed ? "failed" : "succeeded");
break;
@@ -783,7 +789,7 @@ static irqreturn_t elp_interrupt(int irq, void *dev_id)
dev->stats.rx_over_errors += adapter->irx_pcb.data.netstat.err_res;
adapter->got[CMD_NETWORK_STATISTICS] = 1;
if (elp_debug >= 3)
- printk(KERN_DEBUG "%s: interrupt - statistics response received\n", dev->name);
+ pr_debug("%s: interrupt - statistics response received\n", dev->name);
break;
/*
@@ -791,17 +797,17 @@ static irqreturn_t elp_interrupt(int irq, void *dev_id)
*/
case CMD_TRANSMIT_PACKET_COMPLETE:
if (elp_debug >= 3)
- printk(KERN_DEBUG "%s: interrupt - packet sent\n", dev->name);
+ pr_debug("%s: interrupt - packet sent\n", dev->name);
if (!netif_running(dev))
break;
switch (adapter->irx_pcb.data.xmit_resp.c_stat) {
case 0xffff:
dev->stats.tx_aborted_errors++;
- printk(KERN_INFO "%s: transmit timed out, network cable problem?\n", dev->name);
+ pr_info("%s: transmit timed out, network cable problem?\n", dev->name);
break;
case 0xfffe:
dev->stats.tx_fifo_errors++;
- printk(KERN_INFO "%s: transmit timed out, FIFO underrun\n", dev->name);
+ pr_info("%s: transmit timed out, FIFO underrun\n", dev->name);
break;
}
netif_wake_queue(dev);
@@ -811,11 +817,12 @@ static irqreturn_t elp_interrupt(int irq, void *dev_id)
* some unknown PCB
*/
default:
- printk(KERN_DEBUG "%s: unknown PCB received - %2.2x\n", dev->name, adapter->irx_pcb.command);
+ pr_debug("%s: unknown PCB received - %2.2x\n",
+ dev->name, adapter->irx_pcb.command);
break;
}
} else {
- printk(KERN_WARNING "%s: failed to read PCB on interrupt\n", dev->name);
+ pr_warning("%s: failed to read PCB on interrupt\n", dev->name);
adapter_reset(dev);
}
}
@@ -844,13 +851,13 @@ static int elp_open(struct net_device *dev)
int retval;
if (elp_debug >= 3)
- printk(KERN_DEBUG "%s: request to open device\n", dev->name);
+ pr_debug("%s: request to open device\n", dev->name);
/*
* make sure we actually found the device
*/
if (adapter == NULL) {
- printk(KERN_ERR "%s: Opening a non-existent physical device\n", dev->name);
+ pr_err("%s: Opening a non-existent physical device\n", dev->name);
return -EAGAIN;
}
/*
@@ -880,17 +887,17 @@ static int elp_open(struct net_device *dev)
* install our interrupt service routine
*/
if ((retval = request_irq(dev->irq, &elp_interrupt, 0, dev->name, dev))) {
- printk(KERN_ERR "%s: could not allocate IRQ%d\n", dev->name, dev->irq);
+ pr_err("%s: could not allocate IRQ%d\n", dev->name, dev->irq);
return retval;
}
if ((retval = request_dma(dev->dma, dev->name))) {
free_irq(dev->irq, dev);
- printk(KERN_ERR "%s: could not allocate DMA%d channel\n", dev->name, dev->dma);
+ pr_err("%s: could not allocate DMA%d channel\n", dev->name, dev->dma);
return retval;
}
adapter->dma_buffer = (void *) dma_mem_alloc(DMA_BUFFER_SIZE);
if (!adapter->dma_buffer) {
- printk(KERN_ERR "%s: could not allocate DMA buffer\n", dev->name);
+ pr_err("%s: could not allocate DMA buffer\n", dev->name);
free_dma(dev->dma);
free_irq(dev->irq, dev);
return -ENOMEM;
@@ -906,7 +913,7 @@ static int elp_open(struct net_device *dev)
* configure adapter memory: we need 10 multicast addresses, default==0
*/
if (elp_debug >= 3)
- printk(KERN_DEBUG "%s: sending 3c505 memory configuration command\n", dev->name);
+ pr_debug("%s: sending 3c505 memory configuration command\n", dev->name);
adapter->tx_pcb.command = CMD_CONFIGURE_ADAPTER_MEMORY;
adapter->tx_pcb.data.memconf.cmd_q = 10;
adapter->tx_pcb.data.memconf.rcv_q = 20;
@@ -917,7 +924,7 @@ static int elp_open(struct net_device *dev)
adapter->tx_pcb.length = sizeof(struct Memconf);
adapter->got[CMD_CONFIGURE_ADAPTER_MEMORY] = 0;
if (!send_pcb(dev, &adapter->tx_pcb))
- printk(KERN_ERR "%s: couldn't send memory configuration command\n", dev->name);
+ pr_err("%s: couldn't send memory configuration command\n", dev->name);
else {
unsigned long timeout = jiffies + TIMEOUT;
while (adapter->got[CMD_CONFIGURE_ADAPTER_MEMORY] == 0 && time_before(jiffies, timeout));
@@ -930,13 +937,13 @@ static int elp_open(struct net_device *dev)
* configure adapter to receive broadcast messages and wait for response
*/
if (elp_debug >= 3)
- printk(KERN_DEBUG "%s: sending 82586 configure command\n", dev->name);
+ pr_debug("%s: sending 82586 configure command\n", dev->name);
adapter->tx_pcb.command = CMD_CONFIGURE_82586;
adapter->tx_pcb.data.configure = NO_LOOPBACK | RECV_BROAD;
adapter->tx_pcb.length = 2;
adapter->got[CMD_CONFIGURE_82586] = 0;
if (!send_pcb(dev, &adapter->tx_pcb))
- printk(KERN_ERR "%s: couldn't send 82586 configure command\n", dev->name);
+ pr_err("%s: couldn't send 82586 configure command\n", dev->name);
else {
unsigned long timeout = jiffies + TIMEOUT;
while (adapter->got[CMD_CONFIGURE_82586] == 0 && time_before(jiffies, timeout));
@@ -952,7 +959,7 @@ static int elp_open(struct net_device *dev)
*/
prime_rx(dev);
if (elp_debug >= 3)
- printk(KERN_DEBUG "%s: %d receive PCBs active\n", dev->name, adapter->rx_active);
+ pr_debug("%s: %d receive PCBs active\n", dev->name, adapter->rx_active);
/*
* device is now officially open!
@@ -982,7 +989,7 @@ static bool send_packet(struct net_device *dev, struct sk_buff *skb)
if (test_and_set_bit(0, (void *) &adapter->busy)) {
if (elp_debug >= 2)
- printk(KERN_DEBUG "%s: transmit blocked\n", dev->name);
+ pr_debug("%s: transmit blocked\n", dev->name);
return false;
}
@@ -1004,7 +1011,7 @@ static bool send_packet(struct net_device *dev, struct sk_buff *skb)
}
/* if this happens, we die */
if (test_and_set_bit(0, (void *) &adapter->dmaing))
- printk(KERN_DEBUG "%s: tx: DMA %d in progress\n", dev->name, adapter->current_dma.direction);
+ pr_debug("%s: tx: DMA %d in progress\n", dev->name, adapter->current_dma.direction);
adapter->current_dma.direction = 1;
adapter->current_dma.start_time = jiffies;
@@ -1030,7 +1037,7 @@ static bool send_packet(struct net_device *dev, struct sk_buff *skb)
release_dma_lock(flags);
if (elp_debug >= 3)
- printk(KERN_DEBUG "%s: DMA transfer started\n", dev->name);
+ pr_debug("%s: DMA transfer started\n", dev->name);
return true;
}
@@ -1044,9 +1051,10 @@ static void elp_timeout(struct net_device *dev)
int stat;
stat = inb_status(dev->base_addr);
- printk(KERN_WARNING "%s: transmit timed out, lost %s?\n", dev->name, (stat & ACRF) ? "interrupt" : "command");
+ pr_warning("%s: transmit timed out, lost %s?\n", dev->name,
+ (stat & ACRF) ? "interrupt" : "command");
if (elp_debug >= 1)
- printk(KERN_DEBUG "%s: status %#02x\n", dev->name, stat);
+ pr_debug("%s: status %#02x\n", dev->name, stat);
dev->trans_start = jiffies;
dev->stats.tx_dropped++;
netif_wake_queue(dev);
@@ -1068,7 +1076,7 @@ static int elp_start_xmit(struct sk_buff *skb, struct net_device *dev)
check_3c505_dma(dev);
if (elp_debug >= 3)
- printk(KERN_DEBUG "%s: request to send packet of length %d\n", dev->name, (int) skb->len);
+ pr_debug("%s: request to send packet of length %d\n", dev->name, (int) skb->len);
netif_stop_queue(dev);
@@ -1077,13 +1085,13 @@ static int elp_start_xmit(struct sk_buff *skb, struct net_device *dev)
*/
if (!send_packet(dev, skb)) {
if (elp_debug >= 2) {
- printk(KERN_DEBUG "%s: failed to transmit packet\n", dev->name);
+ pr_debug("%s: failed to transmit packet\n", dev->name);
}
spin_unlock_irqrestore(&adapter->lock, flags);
- return 1;
+ return NETDEV_TX_BUSY;
}
if (elp_debug >= 3)
- printk(KERN_DEBUG "%s: packet of length %d sent\n", dev->name, (int) skb->len);
+ pr_debug("%s: packet of length %d sent\n", dev->name, (int) skb->len);
/*
* start the transmit timeout
@@ -1107,7 +1115,7 @@ static struct net_device_stats *elp_get_stats(struct net_device *dev)
elp_device *adapter = netdev_priv(dev);
if (elp_debug >= 3)
- printk(KERN_DEBUG "%s: request for stats\n", dev->name);
+ pr_debug("%s: request for stats\n", dev->name);
/* If the device is closed, just return the latest stats we have,
- we cannot ask from the adapter without interrupts */
@@ -1119,7 +1127,7 @@ static struct net_device_stats *elp_get_stats(struct net_device *dev)
adapter->tx_pcb.length = 0;
adapter->got[CMD_NETWORK_STATISTICS] = 0;
if (!send_pcb(dev, &adapter->tx_pcb))
- printk(KERN_ERR "%s: couldn't send get statistics command\n", dev->name);
+ pr_err("%s: couldn't send get statistics command\n", dev->name);
else {
unsigned long timeout = jiffies + TIMEOUT;
while (adapter->got[CMD_NETWORK_STATISTICS] == 0 && time_before(jiffies, timeout));
@@ -1169,7 +1177,7 @@ static int elp_close(struct net_device *dev)
elp_device *adapter = netdev_priv(dev);
if (elp_debug >= 3)
- printk(KERN_DEBUG "%s: request to close device\n", dev->name);
+ pr_debug("%s: request to close device\n", dev->name);
netif_stop_queue(dev);
@@ -1213,7 +1221,7 @@ static void elp_set_mc_list(struct net_device *dev)
unsigned long flags;
if (elp_debug >= 3)
- printk(KERN_DEBUG "%s: request to set multicast list\n", dev->name);
+ pr_debug("%s: request to set multicast list\n", dev->name);
spin_lock_irqsave(&adapter->lock, flags);
@@ -1228,7 +1236,7 @@ static void elp_set_mc_list(struct net_device *dev)
}
adapter->got[CMD_LOAD_MULTICAST_LIST] = 0;
if (!send_pcb(dev, &adapter->tx_pcb))
- printk(KERN_ERR "%s: couldn't send set_multicast command\n", dev->name);
+ pr_err("%s: couldn't send set_multicast command\n", dev->name);
else {
unsigned long timeout = jiffies + TIMEOUT;
while (adapter->got[CMD_LOAD_MULTICAST_LIST] == 0 && time_before(jiffies, timeout));
@@ -1247,14 +1255,14 @@ static void elp_set_mc_list(struct net_device *dev)
* and wait for response
*/
if (elp_debug >= 3)
- printk(KERN_DEBUG "%s: sending 82586 configure command\n", dev->name);
+ pr_debug("%s: sending 82586 configure command\n", dev->name);
adapter->tx_pcb.command = CMD_CONFIGURE_82586;
adapter->tx_pcb.length = 2;
adapter->got[CMD_CONFIGURE_82586] = 0;
if (!send_pcb(dev, &adapter->tx_pcb))
{
spin_unlock_irqrestore(&adapter->lock, flags);
- printk(KERN_ERR "%s: couldn't send 82586 configure command\n", dev->name);
+ pr_err("%s: couldn't send 82586 configure command\n", dev->name);
}
else {
unsigned long timeout = jiffies + TIMEOUT;
@@ -1283,17 +1291,17 @@ static int __init elp_sense(struct net_device *dev)
orig_HSR = inb_status(addr);
if (elp_debug > 0)
- printk(search_msg, name, addr);
+ pr_debug(search_msg, name, addr);
if (orig_HSR == 0xff) {
if (elp_debug > 0)
- printk(notfound_msg, 1);
+ pr_cont(notfound_msg, 1);
goto out;
}
/* Wait for a while; the adapter may still be booting up */
if (elp_debug > 0)
- printk(stilllooking_msg);
+ pr_cont(stilllooking_msg);
if (orig_HSR & DIR) {
/* If HCR.DIR is up, we pull it down. HSR.DIR should follow. */
@@ -1301,7 +1309,7 @@ static int __init elp_sense(struct net_device *dev)
msleep(300);
if (inb_status(addr) & DIR) {
if (elp_debug > 0)
- printk(notfound_msg, 2);
+ pr_cont(notfound_msg, 2);
goto out;
}
} else {
@@ -1310,7 +1318,7 @@ static int __init elp_sense(struct net_device *dev)
msleep(300);
if (!(inb_status(addr) & DIR)) {
if (elp_debug > 0)
- printk(notfound_msg, 3);
+ pr_cont(notfound_msg, 3);
goto out;
}
}
@@ -1318,7 +1326,7 @@ static int __init elp_sense(struct net_device *dev)
* It certainly looks like a 3c505.
*/
if (elp_debug > 0)
- printk(found_msg);
+ pr_cont(found_msg);
return 0;
out:
@@ -1349,7 +1357,7 @@ static int __init elp_autodetect(struct net_device *dev)
/* could not find an adapter */
if (elp_debug > 0)
- printk(couldnot_msg, dev->name);
+ pr_debug(couldnot_msg, dev->name);
return 0; /* Because of this, the layer above will return -ENODEV */
}
@@ -1424,16 +1432,16 @@ static int __init elplus_setup(struct net_device *dev)
/* Nope, it's ignoring the command register. This means that
* either it's still booting up, or it's died.
*/
- printk(KERN_ERR "%s: command register wouldn't drain, ", dev->name);
+ pr_err("%s: command register wouldn't drain, ", dev->name);
if ((inb_status(dev->base_addr) & 7) == 3) {
/* If the adapter status is 3, it *could* still be booting.
* Give it the benefit of the doubt for 10 seconds.
*/
- printk("assuming 3c505 still starting\n");
+ pr_cont("assuming 3c505 still starting\n");
timeout = jiffies + 10*HZ;
while (time_before(jiffies, timeout) && (inb_status(dev->base_addr) & 7));
if (inb_status(dev->base_addr) & 7) {
- printk(KERN_ERR "%s: 3c505 failed to start\n", dev->name);
+ pr_err("%s: 3c505 failed to start\n", dev->name);
} else {
okay = 1; /* It started */
}
@@ -1441,7 +1449,7 @@ static int __init elplus_setup(struct net_device *dev)
/* Otherwise, it must just be in a strange
* state. We probably need to kick it.
*/
- printk("3c505 is sulking\n");
+ pr_cont("3c505 is sulking\n");
}
}
for (tries = 0; tries < 5 && okay; tries++) {
@@ -1454,18 +1462,19 @@ static int __init elplus_setup(struct net_device *dev)
adapter->tx_pcb.length = 0;
cookie = probe_irq_on();
if (!send_pcb(dev, &adapter->tx_pcb)) {
- printk(KERN_ERR "%s: could not send first PCB\n", dev->name);
+ pr_err("%s: could not send first PCB\n", dev->name);
probe_irq_off(cookie);
continue;
}
if (!receive_pcb(dev, &adapter->rx_pcb)) {
- printk(KERN_ERR "%s: could not read first PCB\n", dev->name);
+ pr_err("%s: could not read first PCB\n", dev->name);
probe_irq_off(cookie);
continue;
}
if ((adapter->rx_pcb.command != CMD_ADDRESS_RESPONSE) ||
(adapter->rx_pcb.length != 6)) {
- printk(KERN_ERR "%s: first PCB wrong (%d, %d)\n", dev->name, adapter->rx_pcb.command, adapter->rx_pcb.length);
+ pr_err("%s: first PCB wrong (%d, %d)\n", dev->name,
+ adapter->rx_pcb.command, adapter->rx_pcb.length);
probe_irq_off(cookie);
continue;
}
@@ -1474,32 +1483,32 @@ static int __init elplus_setup(struct net_device *dev)
/* It's broken. Do a hard reset to re-initialise the board,
* and try again.
*/
- printk(KERN_INFO "%s: resetting adapter\n", dev->name);
+ pr_info("%s: resetting adapter\n", dev->name);
outb_control(adapter->hcr_val | FLSH | ATTN, dev);
outb_control(adapter->hcr_val & ~(FLSH | ATTN), dev);
}
- printk(KERN_ERR "%s: failed to initialise 3c505\n", dev->name);
+ pr_err("%s: failed to initialise 3c505\n", dev->name);
goto out;
okay:
if (dev->irq) { /* Is there a preset IRQ? */
int rpt = probe_irq_off(cookie);
if (dev->irq != rpt) {
- printk(KERN_WARNING "%s: warning, irq %d configured but %d detected\n", dev->name, dev->irq, rpt);
+ pr_warning("%s: warning, irq %d configured but %d detected\n", dev->name, dev->irq, rpt);
}
/* if dev->irq == probe_irq_off(cookie), all is well */
} else /* No preset IRQ; just use what we can detect */
dev->irq = probe_irq_off(cookie);
switch (dev->irq) { /* Legal, sane? */
case 0:
- printk(KERN_ERR "%s: IRQ probe failed: check 3c505 jumpers.\n",
+ pr_err("%s: IRQ probe failed: check 3c505 jumpers.\n",
dev->name);
goto out;
case 1:
case 6:
case 8:
case 13:
- printk(KERN_ERR "%s: Impossible IRQ %d reported by probe_irq_off().\n",
+ pr_err("%s: Impossible IRQ %d reported by probe_irq_off().\n",
dev->name, dev->irq);
goto out;
}
@@ -1521,7 +1530,7 @@ static int __init elplus_setup(struct net_device *dev)
dev->dma = dev->mem_start & 7;
}
else {
- printk(KERN_WARNING "%s: warning, DMA channel not specified, using default\n", dev->name);
+ pr_warning("%s: warning, DMA channel not specified, using default\n", dev->name);
dev->dma = ELP_DMA;
}
}
@@ -1529,11 +1538,8 @@ static int __init elplus_setup(struct net_device *dev)
/*
* print remainder of startup message
*/
- printk(KERN_INFO "%s: 3c505 at %#lx, irq %d, dma %d, "
- "addr %pM, ",
- dev->name, dev->base_addr, dev->irq, dev->dma,
- dev->dev_addr);
-
+ pr_info("%s: 3c505 at %#lx, irq %d, dma %d, addr %pM, ",
+ dev->name, dev->base_addr, dev->irq, dev->dma, dev->dev_addr);
/*
* read more information from the adapter
*/
@@ -1544,9 +1550,10 @@ static int __init elplus_setup(struct net_device *dev)
!receive_pcb(dev, &adapter->rx_pcb) ||
(adapter->rx_pcb.command != CMD_ADAPTER_INFO_RESPONSE) ||
(adapter->rx_pcb.length != 10)) {
- printk("not responding to second PCB\n");
+ pr_cont("not responding to second PCB\n");
}
- printk("rev %d.%d, %dk\n", adapter->rx_pcb.data.info.major_vers, adapter->rx_pcb.data.info.minor_vers, adapter->rx_pcb.data.info.RAM_sz);
+ pr_cont("rev %d.%d, %dk\n", adapter->rx_pcb.data.info.major_vers,
+ adapter->rx_pcb.data.info.minor_vers, adapter->rx_pcb.data.info.RAM_sz);
/*
* reconfigure the adapter memory to better suit our purposes
@@ -1563,10 +1570,10 @@ static int __init elplus_setup(struct net_device *dev)
!receive_pcb(dev, &adapter->rx_pcb) ||
(adapter->rx_pcb.command != CMD_CONFIGURE_ADAPTER_RESPONSE) ||
(adapter->rx_pcb.length != 2)) {
- printk(KERN_ERR "%s: could not configure adapter memory\n", dev->name);
+ pr_err("%s: could not configure adapter memory\n", dev->name);
}
if (adapter->rx_pcb.data.configure) {
- printk(KERN_ERR "%s: adapter configuration failed\n", dev->name);
+ pr_err("%s: adapter configuration failed\n", dev->name);
}
dev->netdev_ops = &elp_netdev_ops;
@@ -1631,17 +1638,17 @@ int __init init_module(void)
dev->dma = dma[this_dev];
} else {
dev->dma = ELP_DMA;
- printk(KERN_WARNING "3c505.c: warning, using default DMA channel,\n");
+ pr_warning("3c505.c: warning, using default DMA channel,\n");
}
if (io[this_dev] == 0) {
if (this_dev) {
free_netdev(dev);
break;
}
- printk(KERN_NOTICE "3c505.c: module autoprobe not recommended, give io=xx.\n");
+ pr_notice("3c505.c: module autoprobe not recommended, give io=xx.\n");
}
if (elplus_setup(dev) != 0) {
- printk(KERN_WARNING "3c505.c: Failed to register card at 0x%x.\n", io[this_dev]);
+ pr_warning("3c505.c: Failed to register card at 0x%x.\n", io[this_dev]);
free_netdev(dev);
break;
}