diff options
Diffstat (limited to 'drivers/media/video/em28xx/em28xx-reg.h')
| -rw-r--r-- | drivers/media/video/em28xx/em28xx-reg.h | 153 |
1 files changed, 149 insertions, 4 deletions
diff --git a/drivers/media/video/em28xx/em28xx-reg.h b/drivers/media/video/em28xx/em28xx-reg.h index fac1ab23f62..65dcb91bdcc 100644 --- a/drivers/media/video/em28xx/em28xx-reg.h +++ b/drivers/media/video/em28xx/em28xx-reg.h @@ -17,17 +17,58 @@ /* em28xx registers */ +#define EM28XX_R00_CHIPCFG 0x00 + +/* em28xx Chip Configuration 0x00 */ +#define EM28XX_CHIPCFG_VENDOR_AUDIO 0x80 +#define EM28XX_CHIPCFG_I2S_VOLUME_CAPABLE 0x40 +#define EM28XX_CHIPCFG_I2S_5_SAMPRATES 0x30 +#define EM28XX_CHIPCFG_I2S_3_SAMPRATES 0x20 +#define EM28XX_CHIPCFG_AC97 0x10 +#define EM28XX_CHIPCFG_AUDIOMASK 0x30 + /* GPIO/GPO registers */ #define EM2880_R04_GPO 0x04 /* em2880-em2883 only */ #define EM28XX_R08_GPIO 0x08 /* em2820 or upper */ #define EM28XX_R06_I2C_CLK 0x06 + +/* em28xx I2C Clock Register (0x06) */ +#define EM28XX_I2C_CLK_ACK_LAST_READ 0x80 +#define EM28XX_I2C_CLK_WAIT_ENABLE 0x40 +#define EM28XX_I2C_EEPROM_ON_BOARD 0x08 +#define EM28XX_I2C_EEPROM_KEY_VALID 0x04 +#define EM2874_I2C_SECONDARY_BUS_SELECT 0x04 /* em2874 has two i2c busses */ +#define EM28XX_I2C_FREQ_1_5_MHZ 0x03 /* bus frequency (bits [1-0]) */ +#define EM28XX_I2C_FREQ_25_KHZ 0x02 +#define EM28XX_I2C_FREQ_400_KHZ 0x01 +#define EM28XX_I2C_FREQ_100_KHZ 0x00 + + #define EM28XX_R0A_CHIPID 0x0a #define EM28XX_R0C_USBSUSP 0x0c /* */ #define EM28XX_R0E_AUDIOSRC 0x0e #define EM28XX_R0F_XCLK 0x0f +/* em28xx XCLK Register (0x0f) */ +#define EM28XX_XCLK_AUDIO_UNMUTE 0x80 /* otherwise audio muted */ +#define EM28XX_XCLK_I2S_MSB_TIMING 0x40 /* otherwise standard timing */ +#define EM28XX_XCLK_IR_RC5_MODE 0x20 /* otherwise NEC mode */ +#define EM28XX_XCLK_IR_NEC_CHK_PARITY 0x10 +#define EM28XX_XCLK_FREQUENCY_30MHZ 0x00 /* Freq. select (bits [3-0]) */ +#define EM28XX_XCLK_FREQUENCY_15MHZ 0x01 +#define EM28XX_XCLK_FREQUENCY_10MHZ 0x02 +#define EM28XX_XCLK_FREQUENCY_7_5MHZ 0x03 +#define EM28XX_XCLK_FREQUENCY_6MHZ 0x04 +#define EM28XX_XCLK_FREQUENCY_5MHZ 0x05 +#define EM28XX_XCLK_FREQUENCY_4_3MHZ 0x06 +#define EM28XX_XCLK_FREQUENCY_12MHZ 0x07 +#define EM28XX_XCLK_FREQUENCY_20MHZ 0x08 +#define EM28XX_XCLK_FREQUENCY_20MHZ_2 0x09 +#define EM28XX_XCLK_FREQUENCY_48MHZ 0x0a +#define EM28XX_XCLK_FREQUENCY_24MHZ 0x0b + #define EM28XX_R10_VINMODE 0x10 #define EM28XX_R11_VINCTRL 0x11 #define EM28XX_R12_VINENABLE 0x12 /* */ @@ -56,6 +97,19 @@ #define EM28XX_R26_COMPR 0x26 #define EM28XX_R27_OUTFMT 0x27 +/* em28xx Output Format Register (0x27) */ +#define EM28XX_OUTFMT_RGB_8_RGRG 0x00 +#define EM28XX_OUTFMT_RGB_8_GRGR 0x01 +#define EM28XX_OUTFMT_RGB_8_GBGB 0x02 +#define EM28XX_OUTFMT_RGB_8_BGBG 0x03 +#define EM28XX_OUTFMT_RGB_16_656 0x04 +#define EM28XX_OUTFMT_RGB_8_BAYER 0x08 /* Pattern in Reg 0x10[1-0] */ +#define EM28XX_OUTFMT_YUV211 0x10 +#define EM28XX_OUTFMT_YUV422_Y0UY1V 0x14 +#define EM28XX_OUTFMT_YUV422_Y1UY0V 0x15 +#define EM28XX_OUTFMT_YUV411 0x18 + + #define EM28XX_R28_XMIN 0x28 #define EM28XX_R29_XMAX 0x29 #define EM28XX_R2A_YMIN 0x2a @@ -71,10 +125,32 @@ #define EM28XX_R42_AC97ADDR 0x42 #define EM28XX_R43_AC97BUSY 0x43 -/* em202 registers */ -#define EM28XX_R02_MASTER_AC97 0x02 -#define EM28XX_R10_LINE_IN_AC97 0x10 -#define EM28XX_R14_VIDEO_AC97 0x14 +#define EM28XX_R45_IR 0x45 + /* 0x45 bit 7 - parity bit + bits 6-0 - count + 0x46 IR brand + 0x47 IR data + */ + +/* em2874 registers */ +#define EM2874_R50_IR_CONFIG 0x50 +#define EM2874_R51_IR 0x51 +#define EM2874_R5F_TS_ENABLE 0x5f +#define EM2874_R80_GPIO 0x80 + +/* em2874 IR config register (0x50) */ +#define EM2874_IR_NEC 0x00 +#define EM2874_IR_RC5 0x04 +#define EM2874_IR_RC5_MODE_0 0x08 +#define EM2874_IR_RC5_MODE_6A 0x0b + +/* em2874 Transport Stream Enable Register (0x5f) */ +#define EM2874_TS1_CAPTURE_ENABLE (1 << 0) +#define EM2874_TS1_FILTER_ENABLE (1 << 1) +#define EM2874_TS1_NULL_DISCARD (1 << 2) +#define EM2874_TS2_CAPTURE_ENABLE (1 << 4) +#define EM2874_TS2_FILTER_ENABLE (1 << 5) +#define EM2874_TS2_NULL_DISCARD (1 << 6) /* register settings */ #define EM2800_AUDIO_SRC_TUNER 0x0d @@ -84,6 +160,75 @@ /* FIXME: Need to be populated with the other chip ID's */ enum em28xx_chip_id { + CHIP_ID_EM2820 = 18, + CHIP_ID_EM2840 = 20, + CHIP_ID_EM2750 = 33, CHIP_ID_EM2860 = 34, + CHIP_ID_EM2870 = 35, CHIP_ID_EM2883 = 36, + CHIP_ID_EM2874 = 65, }; + +/* + * Registers used by em202 and other AC97 chips + */ + +/* Standard AC97 registers */ +#define AC97_RESET 0x00 + + /* Output volumes */ +#define AC97_MASTER_VOL 0x02 +#define AC97_LINE_LEVEL_VOL 0x04 /* Some devices use for headphones */ +#define AC97_MASTER_MONO_VOL 0x06 + + /* Input volumes */ +#define AC97_PC_BEEP_VOL 0x0a +#define AC97_PHONE_VOL 0x0c +#define AC97_MIC_VOL 0x0e +#define AC97_LINEIN_VOL 0x10 +#define AC97_CD_VOL 0x12 +#define AC97_VIDEO_VOL 0x14 +#define AC97_AUX_VOL 0x16 +#define AC97_PCM_OUT_VOL 0x18 + + /* capture registers */ +#define AC97_RECORD_SELECT 0x1a +#define AC97_RECORD_GAIN 0x1c + + /* control registers */ +#define AC97_GENERAL_PURPOSE 0x20 +#define AC97_3D_CTRL 0x22 +#define AC97_AUD_INT_AND_PAG 0x24 +#define AC97_POWER_DOWN_CTRL 0x26 +#define AC97_EXT_AUD_ID 0x28 +#define AC97_EXT_AUD_CTRL 0x2a + +/* Supported rate varies for each AC97 device + if write an unsupported value, it will return the closest one + */ +#define AC97_PCM_OUT_FRONT_SRATE 0x2c +#define AC97_PCM_OUT_SURR_SRATE 0x2e +#define AC97_PCM_OUT_LFE_SRATE 0x30 +#define AC97_PCM_IN_SRATE 0x32 + + /* For devices with more than 2 channels, extra output volumes */ +#define AC97_LFE_MASTER_VOL 0x36 +#define AC97_SURR_MASTER_VOL 0x38 + + /* Digital SPDIF output control */ +#define AC97_SPDIF_OUT_CTRL 0x3a + + /* Vendor ID identifier */ +#define AC97_VENDOR_ID1 0x7c +#define AC97_VENDOR_ID2 0x7e + +/* EMP202 vendor registers */ +#define EM202_EXT_MODEM_CTRL 0x3e +#define EM202_GPIO_CONF 0x4c +#define EM202_GPIO_POLARITY 0x4e +#define EM202_GPIO_STICKY 0x50 +#define EM202_GPIO_MASK 0x52 +#define EM202_GPIO_STATUS 0x54 +#define EM202_SPDIF_OUT_SEL 0x6a +#define EM202_ANTIPOP 0x72 +#define EM202_EAPD_GPIO_ACCESS 0x74 |