summaryrefslogtreecommitdiffstats
path: root/drivers/media/video/em28xx/em28xx-reg.h
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/media/video/em28xx/em28xx-reg.h')
-rw-r--r--drivers/media/video/em28xx/em28xx-reg.h153
1 files changed, 149 insertions, 4 deletions
diff --git a/drivers/media/video/em28xx/em28xx-reg.h b/drivers/media/video/em28xx/em28xx-reg.h
index fac1ab23f62..65dcb91bdcc 100644
--- a/drivers/media/video/em28xx/em28xx-reg.h
+++ b/drivers/media/video/em28xx/em28xx-reg.h
@@ -17,17 +17,58 @@
/* em28xx registers */
+#define EM28XX_R00_CHIPCFG 0x00
+
+/* em28xx Chip Configuration 0x00 */
+#define EM28XX_CHIPCFG_VENDOR_AUDIO 0x80
+#define EM28XX_CHIPCFG_I2S_VOLUME_CAPABLE 0x40
+#define EM28XX_CHIPCFG_I2S_5_SAMPRATES 0x30
+#define EM28XX_CHIPCFG_I2S_3_SAMPRATES 0x20
+#define EM28XX_CHIPCFG_AC97 0x10
+#define EM28XX_CHIPCFG_AUDIOMASK 0x30
+
/* GPIO/GPO registers */
#define EM2880_R04_GPO 0x04 /* em2880-em2883 only */
#define EM28XX_R08_GPIO 0x08 /* em2820 or upper */
#define EM28XX_R06_I2C_CLK 0x06
+
+/* em28xx I2C Clock Register (0x06) */
+#define EM28XX_I2C_CLK_ACK_LAST_READ 0x80
+#define EM28XX_I2C_CLK_WAIT_ENABLE 0x40
+#define EM28XX_I2C_EEPROM_ON_BOARD 0x08
+#define EM28XX_I2C_EEPROM_KEY_VALID 0x04
+#define EM2874_I2C_SECONDARY_BUS_SELECT 0x04 /* em2874 has two i2c busses */
+#define EM28XX_I2C_FREQ_1_5_MHZ 0x03 /* bus frequency (bits [1-0]) */
+#define EM28XX_I2C_FREQ_25_KHZ 0x02
+#define EM28XX_I2C_FREQ_400_KHZ 0x01
+#define EM28XX_I2C_FREQ_100_KHZ 0x00
+
+
#define EM28XX_R0A_CHIPID 0x0a
#define EM28XX_R0C_USBSUSP 0x0c /* */
#define EM28XX_R0E_AUDIOSRC 0x0e
#define EM28XX_R0F_XCLK 0x0f
+/* em28xx XCLK Register (0x0f) */
+#define EM28XX_XCLK_AUDIO_UNMUTE 0x80 /* otherwise audio muted */
+#define EM28XX_XCLK_I2S_MSB_TIMING 0x40 /* otherwise standard timing */
+#define EM28XX_XCLK_IR_RC5_MODE 0x20 /* otherwise NEC mode */
+#define EM28XX_XCLK_IR_NEC_CHK_PARITY 0x10
+#define EM28XX_XCLK_FREQUENCY_30MHZ 0x00 /* Freq. select (bits [3-0]) */
+#define EM28XX_XCLK_FREQUENCY_15MHZ 0x01
+#define EM28XX_XCLK_FREQUENCY_10MHZ 0x02
+#define EM28XX_XCLK_FREQUENCY_7_5MHZ 0x03
+#define EM28XX_XCLK_FREQUENCY_6MHZ 0x04
+#define EM28XX_XCLK_FREQUENCY_5MHZ 0x05
+#define EM28XX_XCLK_FREQUENCY_4_3MHZ 0x06
+#define EM28XX_XCLK_FREQUENCY_12MHZ 0x07
+#define EM28XX_XCLK_FREQUENCY_20MHZ 0x08
+#define EM28XX_XCLK_FREQUENCY_20MHZ_2 0x09
+#define EM28XX_XCLK_FREQUENCY_48MHZ 0x0a
+#define EM28XX_XCLK_FREQUENCY_24MHZ 0x0b
+
#define EM28XX_R10_VINMODE 0x10
#define EM28XX_R11_VINCTRL 0x11
#define EM28XX_R12_VINENABLE 0x12 /* */
@@ -56,6 +97,19 @@
#define EM28XX_R26_COMPR 0x26
#define EM28XX_R27_OUTFMT 0x27
+/* em28xx Output Format Register (0x27) */
+#define EM28XX_OUTFMT_RGB_8_RGRG 0x00
+#define EM28XX_OUTFMT_RGB_8_GRGR 0x01
+#define EM28XX_OUTFMT_RGB_8_GBGB 0x02
+#define EM28XX_OUTFMT_RGB_8_BGBG 0x03
+#define EM28XX_OUTFMT_RGB_16_656 0x04
+#define EM28XX_OUTFMT_RGB_8_BAYER 0x08 /* Pattern in Reg 0x10[1-0] */
+#define EM28XX_OUTFMT_YUV211 0x10
+#define EM28XX_OUTFMT_YUV422_Y0UY1V 0x14
+#define EM28XX_OUTFMT_YUV422_Y1UY0V 0x15
+#define EM28XX_OUTFMT_YUV411 0x18
+
+
#define EM28XX_R28_XMIN 0x28
#define EM28XX_R29_XMAX 0x29
#define EM28XX_R2A_YMIN 0x2a
@@ -71,10 +125,32 @@
#define EM28XX_R42_AC97ADDR 0x42
#define EM28XX_R43_AC97BUSY 0x43
-/* em202 registers */
-#define EM28XX_R02_MASTER_AC97 0x02
-#define EM28XX_R10_LINE_IN_AC97 0x10
-#define EM28XX_R14_VIDEO_AC97 0x14
+#define EM28XX_R45_IR 0x45
+ /* 0x45 bit 7 - parity bit
+ bits 6-0 - count
+ 0x46 IR brand
+ 0x47 IR data
+ */
+
+/* em2874 registers */
+#define EM2874_R50_IR_CONFIG 0x50
+#define EM2874_R51_IR 0x51
+#define EM2874_R5F_TS_ENABLE 0x5f
+#define EM2874_R80_GPIO 0x80
+
+/* em2874 IR config register (0x50) */
+#define EM2874_IR_NEC 0x00
+#define EM2874_IR_RC5 0x04
+#define EM2874_IR_RC5_MODE_0 0x08
+#define EM2874_IR_RC5_MODE_6A 0x0b
+
+/* em2874 Transport Stream Enable Register (0x5f) */
+#define EM2874_TS1_CAPTURE_ENABLE (1 << 0)
+#define EM2874_TS1_FILTER_ENABLE (1 << 1)
+#define EM2874_TS1_NULL_DISCARD (1 << 2)
+#define EM2874_TS2_CAPTURE_ENABLE (1 << 4)
+#define EM2874_TS2_FILTER_ENABLE (1 << 5)
+#define EM2874_TS2_NULL_DISCARD (1 << 6)
/* register settings */
#define EM2800_AUDIO_SRC_TUNER 0x0d
@@ -84,6 +160,75 @@
/* FIXME: Need to be populated with the other chip ID's */
enum em28xx_chip_id {
+ CHIP_ID_EM2820 = 18,
+ CHIP_ID_EM2840 = 20,
+ CHIP_ID_EM2750 = 33,
CHIP_ID_EM2860 = 34,
+ CHIP_ID_EM2870 = 35,
CHIP_ID_EM2883 = 36,
+ CHIP_ID_EM2874 = 65,
};
+
+/*
+ * Registers used by em202 and other AC97 chips
+ */
+
+/* Standard AC97 registers */
+#define AC97_RESET 0x00
+
+ /* Output volumes */
+#define AC97_MASTER_VOL 0x02
+#define AC97_LINE_LEVEL_VOL 0x04 /* Some devices use for headphones */
+#define AC97_MASTER_MONO_VOL 0x06
+
+ /* Input volumes */
+#define AC97_PC_BEEP_VOL 0x0a
+#define AC97_PHONE_VOL 0x0c
+#define AC97_MIC_VOL 0x0e
+#define AC97_LINEIN_VOL 0x10
+#define AC97_CD_VOL 0x12
+#define AC97_VIDEO_VOL 0x14
+#define AC97_AUX_VOL 0x16
+#define AC97_PCM_OUT_VOL 0x18
+
+ /* capture registers */
+#define AC97_RECORD_SELECT 0x1a
+#define AC97_RECORD_GAIN 0x1c
+
+ /* control registers */
+#define AC97_GENERAL_PURPOSE 0x20
+#define AC97_3D_CTRL 0x22
+#define AC97_AUD_INT_AND_PAG 0x24
+#define AC97_POWER_DOWN_CTRL 0x26
+#define AC97_EXT_AUD_ID 0x28
+#define AC97_EXT_AUD_CTRL 0x2a
+
+/* Supported rate varies for each AC97 device
+ if write an unsupported value, it will return the closest one
+ */
+#define AC97_PCM_OUT_FRONT_SRATE 0x2c
+#define AC97_PCM_OUT_SURR_SRATE 0x2e
+#define AC97_PCM_OUT_LFE_SRATE 0x30
+#define AC97_PCM_IN_SRATE 0x32
+
+ /* For devices with more than 2 channels, extra output volumes */
+#define AC97_LFE_MASTER_VOL 0x36
+#define AC97_SURR_MASTER_VOL 0x38
+
+ /* Digital SPDIF output control */
+#define AC97_SPDIF_OUT_CTRL 0x3a
+
+ /* Vendor ID identifier */
+#define AC97_VENDOR_ID1 0x7c
+#define AC97_VENDOR_ID2 0x7e
+
+/* EMP202 vendor registers */
+#define EM202_EXT_MODEM_CTRL 0x3e
+#define EM202_GPIO_CONF 0x4c
+#define EM202_GPIO_POLARITY 0x4e
+#define EM202_GPIO_STICKY 0x50
+#define EM202_GPIO_MASK 0x52
+#define EM202_GPIO_STATUS 0x54
+#define EM202_SPDIF_OUT_SEL 0x6a
+#define EM202_ANTIPOP 0x72
+#define EM202_EAPD_GPIO_ACCESS 0x74