diff options
Diffstat (limited to 'drivers/input/keyboard')
| -rw-r--r-- | drivers/input/keyboard/Kconfig | 305 | ||||
| -rw-r--r-- | drivers/input/keyboard/Makefile | 33 | ||||
| -rw-r--r-- | drivers/input/keyboard/atkbd.c | 67 | ||||
| -rw-r--r-- | drivers/input/keyboard/ep93xx_keypad.c | 470 | ||||
| -rw-r--r-- | drivers/input/keyboard/gpio_keys.c | 20 | ||||
| -rw-r--r-- | drivers/input/keyboard/lm8323.c | 878 | ||||
| -rw-r--r-- | drivers/input/keyboard/matrix_keypad.c | 453 |
7 files changed, 2066 insertions, 160 deletions
diff --git a/drivers/input/keyboard/Kconfig b/drivers/input/keyboard/Kconfig index ea2638b4198..a6b989a9dc0 100644 --- a/drivers/input/keyboard/Kconfig +++ b/drivers/input/keyboard/Kconfig @@ -12,6 +12,42 @@ menuconfig INPUT_KEYBOARD if INPUT_KEYBOARD +config KEYBOARD_AAED2000 + tristate "AAED-2000 keyboard" + depends on MACH_AAED2000 + select INPUT_POLLDEV + default y + help + Say Y here to enable the keyboard on the Agilent AAED-2000 + development board. + + To compile this driver as a module, choose M here: the + module will be called aaed2000_kbd. + +config KEYBOARD_AMIGA + tristate "Amiga keyboard" + depends on AMIGA + help + Say Y here if you are running Linux on any AMIGA and have a keyboard + attached. + + To compile this driver as a module, choose M here: the + module will be called amikbd. + +config ATARI_KBD_CORE + bool + +config KEYBOARD_ATARI + tristate "Atari keyboard" + depends on ATARI + select ATARI_KBD_CORE + help + Say Y here if you are running Linux on any Atari and have a keyboard + attached. + + To compile this driver as a module, choose M here: the + module will be called atakbd. + config KEYBOARD_ATKBD tristate "AT keyboard" if EMBEDDED || !X86 default y @@ -68,69 +104,14 @@ config KEYBOARD_ATKBD_RDI_KEYCODES right-hand column will be interpreted as the key shown in the left-hand column. -config KEYBOARD_SUNKBD - tristate "Sun Type 4 and Type 5 keyboard" - select SERIO - help - Say Y here if you want to use a Sun Type 4 or Type 5 keyboard, - connected either to the Sun keyboard connector or to an serial - (RS-232) port via a simple adapter. - - To compile this driver as a module, choose M here: the - module will be called sunkbd. - -config KEYBOARD_LKKBD - tristate "DECstation/VAXstation LK201/LK401 keyboard" - select SERIO - help - Say Y here if you want to use a LK201 or LK401 style serial - keyboard. This keyboard is also useable on PCs if you attach - it with the inputattach program. The connector pinout is - described within lkkbd.c. - - To compile this driver as a module, choose M here: the - module will be called lkkbd. - -config KEYBOARD_LOCOMO - tristate "LoCoMo Keyboard Support" - depends on SHARP_LOCOMO && INPUT_KEYBOARD - help - Say Y here if you are running Linux on a Sharp Zaurus Collie or Poodle based PDA - - To compile this driver as a module, choose M here: the - module will be called locomokbd. - -config KEYBOARD_XTKBD - tristate "XT keyboard" - select SERIO - help - Say Y here if you want to use the old IBM PC/XT keyboard (or - compatible) on your system. This is only possible with a - parallel port keyboard adapter, you cannot connect it to the - keyboard port on a PC that runs Linux. - - To compile this driver as a module, choose M here: the - module will be called xtkbd. - -config KEYBOARD_NEWTON - tristate "Newton keyboard" - select SERIO - help - Say Y here if you have a Newton keyboard on a serial port. - - To compile this driver as a module, choose M here: the - module will be called newtonkbd. - -config KEYBOARD_STOWAWAY - tristate "Stowaway keyboard" - select SERIO +config KEYBOARD_BFIN + tristate "Blackfin BF54x keypad support" + depends on (BF54x && !BF544) help - Say Y here if you have a Stowaway keyboard on a serial port. - Stowaway compatible keyboards like Dicota Input-PDA keyboard - are also supported by this driver. + Say Y here if you want to use the BF54x keypad. To compile this driver as a module, choose M here: the - module will be called stowaway. + module will be called bf54x-keys. config KEYBOARD_CORGI tristate "Corgi keyboard" @@ -143,61 +124,50 @@ config KEYBOARD_CORGI To compile this driver as a module, choose M here: the module will be called corgikbd. -config KEYBOARD_SPITZ - tristate "Spitz keyboard" - depends on PXA_SHARPSL - default y +config KEYBOARD_LKKBD + tristate "DECstation/VAXstation LK201/LK401 keyboard" + select SERIO help - Say Y here to enable the keyboard on the Sharp Zaurus SL-C1000, - SL-C3000 and Sl-C3100 series of PDAs. + Say Y here if you want to use a LK201 or LK401 style serial + keyboard. This keyboard is also useable on PCs if you attach + it with the inputattach program. The connector pinout is + described within lkkbd.c. To compile this driver as a module, choose M here: the - module will be called spitzkbd. + module will be called lkkbd. -config KEYBOARD_TOSA - tristate "Tosa keyboard" - depends on MACH_TOSA - default y +config KEYBOARD_EP93XX + tristate "EP93xx Matrix Keypad support" + depends on ARCH_EP93XX help - Say Y here to enable the keyboard on the Sharp Zaurus SL-6000x (Tosa) + Say Y here to enable the matrix keypad on the Cirrus EP93XX. To compile this driver as a module, choose M here: the - module will be called tosakbd. + module will be called ep93xx_keypad. -config KEYBOARD_TOSA_USE_EXT_KEYCODES - bool "Tosa keyboard: use extended keycodes" - depends on KEYBOARD_TOSA - default n +config KEYBOARD_GPIO + tristate "GPIO Buttons" + depends on GENERIC_GPIO help - Say Y here to enable the tosa keyboard driver to generate extended - (>= 127) keycodes. Be aware, that they can't be correctly interpreted - by either console keyboard driver or by Kdrive keybd driver. - - Say Y only if you know, what you are doing! + This driver implements support for buttons connected + to GPIO pins of various CPUs (and some other chips). -config KEYBOARD_AMIGA - tristate "Amiga keyboard" - depends on AMIGA - help - Say Y here if you are running Linux on any AMIGA and have a keyboard - attached. + Say Y here if your device has buttons connected + directly to such GPIO pins. Your board-specific + setup logic must also provide a platform device, + with configuration data saying which GPIOs are used. To compile this driver as a module, choose M here: the - module will be called amikbd. + module will be called gpio_keys. -config ATARI_KBD_CORE - bool - -config KEYBOARD_ATARI - tristate "Atari keyboard" - depends on ATARI - select ATARI_KBD_CORE +config KEYBOARD_MATRIX + tristate "GPIO driven matrix keypad support" + depends on GENERIC_GPIO help - Say Y here if you are running Linux on any Atari and have a keyboard - attached. + Enable support for GPIO driven matrix keypad. To compile this driver as a module, choose M here: the - module will be called atakbd. + module will be called matrix_keypad. config KEYBOARD_HIL_OLD tristate "HP HIL keyboard support (simple driver)" @@ -250,20 +220,50 @@ config KEYBOARD_HP7XX To compile this driver as a module, choose M here: the module will be called jornada720_kbd. -config KEYBOARD_OMAP - tristate "TI OMAP keypad support" - depends on (ARCH_OMAP1 || ARCH_OMAP2) +config KEYBOARD_LM8323 + tristate "LM8323 keypad chip" + depends on I2C + depends on LEDS_CLASS help - Say Y here if you want to use the OMAP keypad. + If you say yes here you get support for the National Semiconductor + LM8323 keypad controller. To compile this driver as a module, choose M here: the - module will be called omap-keypad. + module will be called lm8323. + +config KEYBOARD_LOCOMO + tristate "LoCoMo Keyboard Support" + depends on SHARP_LOCOMO + help + Say Y here if you are running Linux on a Sharp Zaurus Collie or Poodle based PDA + + To compile this driver as a module, choose M here: the + module will be called locomokbd. + +config KEYBOARD_MAPLE + tristate "Maple bus keyboard" + depends on SH_DREAMCAST && MAPLE + help + Say Y here if you have a Dreamcast console running Linux and have + a keyboard attached to its Maple bus. + + To compile this driver as a module, choose M here: the + module will be called maple_keyb. + +config KEYBOARD_NEWTON + tristate "Newton keyboard" + select SERIO + help + Say Y here if you have a Newton keyboard on a serial port. + + To compile this driver as a module, choose M here: the + module will be called newtonkbd. config KEYBOARD_PXA27x tristate "PXA27x/PXA3xx keypad support" depends on PXA27x || PXA3xx help - Enable support for PXA27x/PXA3xx keypad controller + Enable support for PXA27x/PXA3xx keypad controller. To compile this driver as a module, choose M here: the module will be called pxa27x_keypad. @@ -277,51 +277,38 @@ config KEYBOARD_PXA930_ROTARY To compile this driver as a module, choose M here: the module will be called pxa930_rotary. -config KEYBOARD_AAED2000 - tristate "AAED-2000 keyboard" - depends on MACH_AAED2000 - select INPUT_POLLDEV +config KEYBOARD_SPITZ + tristate "Spitz keyboard" + depends on PXA_SHARPSL default y help - Say Y here to enable the keyboard on the Agilent AAED-2000 - development board. - - To compile this driver as a module, choose M here: the - module will be called aaed2000_kbd. - -config KEYBOARD_GPIO - tristate "GPIO Buttons" - depends on GENERIC_GPIO - help - This driver implements support for buttons connected - to GPIO pins of various CPUs (and some other chips). - - Say Y here if your device has buttons connected - directly to such GPIO pins. Your board-specific - setup logic must also provide a platform device, - with configuration data saying which GPIOs are used. + Say Y here to enable the keyboard on the Sharp Zaurus SL-C1000, + SL-C3000 and Sl-C3100 series of PDAs. To compile this driver as a module, choose M here: the - module will be called gpio-keys. + module will be called spitzkbd. -config KEYBOARD_MAPLE - tristate "Maple bus keyboard" - depends on SH_DREAMCAST && MAPLE +config KEYBOARD_STOWAWAY + tristate "Stowaway keyboard" + select SERIO help - Say Y here if you have a Dreamcast console running Linux and have - a keyboard attached to its Maple bus. + Say Y here if you have a Stowaway keyboard on a serial port. + Stowaway compatible keyboards like Dicota Input-PDA keyboard + are also supported by this driver. To compile this driver as a module, choose M here: the - module will be called maple_keyb. + module will be called stowaway. -config KEYBOARD_BFIN - tristate "Blackfin BF54x keypad support" - depends on (BF54x && !BF544) +config KEYBOARD_SUNKBD + tristate "Sun Type 4 and Type 5 keyboard" + select SERIO help - Say Y here if you want to use the BF54x keypad. + Say Y here if you want to use a Sun Type 4 or Type 5 keyboard, + connected either to the Sun keyboard connector or to an serial + (RS-232) port via a simple adapter. To compile this driver as a module, choose M here: the - module will be called bf54x-keys. + module will be called sunkbd. config KEYBOARD_SH_KEYSC tristate "SuperH KEYSC keypad support" @@ -332,4 +319,46 @@ config KEYBOARD_SH_KEYSC To compile this driver as a module, choose M here: the module will be called sh_keysc. + +config KEYBOARD_OMAP + tristate "TI OMAP keypad support" + depends on (ARCH_OMAP1 || ARCH_OMAP2) + help + Say Y here if you want to use the OMAP keypad. + + To compile this driver as a module, choose M here: the + module will be called omap-keypad. + +config KEYBOARD_TOSA + tristate "Tosa keyboard" + depends on MACH_TOSA + default y + help + Say Y here to enable the keyboard on the Sharp Zaurus SL-6000x (Tosa) + + To compile this driver as a module, choose M here: the + module will be called tosakbd. + +config KEYBOARD_TOSA_USE_EXT_KEYCODES + bool "Tosa keyboard: use extended keycodes" + depends on KEYBOARD_TOSA + help + Say Y here to enable the tosa keyboard driver to generate extended + (>= 127) keycodes. Be aware, that they can't be correctly interpreted + by either console keyboard driver or by Kdrive keybd driver. + + Say Y only if you know, what you are doing! + +config KEYBOARD_XTKBD + tristate "XT keyboard" + select SERIO + help + Say Y here if you want to use the old IBM PC/XT keyboard (or + compatible) on your system. This is only possible with a + parallel port keyboard adapter, you cannot connect it to the + keyboard port on a PC that runs Linux. + + To compile this driver as a module, choose M here: the + module will be called xtkbd. + endif diff --git a/drivers/input/keyboard/Makefile b/drivers/input/keyboard/Makefile index 36351e1190f..b5b5eae9724 100644 --- a/drivers/input/keyboard/Makefile +++ b/drivers/input/keyboard/Makefile @@ -4,27 +4,30 @@ # Each configuration option enables a list of files. -obj-$(CONFIG_KEYBOARD_ATKBD) += atkbd.o -obj-$(CONFIG_KEYBOARD_SUNKBD) += sunkbd.o -obj-$(CONFIG_KEYBOARD_LKKBD) += lkkbd.o -obj-$(CONFIG_KEYBOARD_XTKBD) += xtkbd.o +obj-$(CONFIG_KEYBOARD_AAED2000) += aaed2000_kbd.o obj-$(CONFIG_KEYBOARD_AMIGA) += amikbd.o obj-$(CONFIG_KEYBOARD_ATARI) += atakbd.o -obj-$(CONFIG_KEYBOARD_LOCOMO) += locomokbd.o -obj-$(CONFIG_KEYBOARD_NEWTON) += newtonkbd.o -obj-$(CONFIG_KEYBOARD_STOWAWAY) += stowaway.o +obj-$(CONFIG_KEYBOARD_ATKBD) += atkbd.o +obj-$(CONFIG_KEYBOARD_BFIN) += bf54x-keys.o obj-$(CONFIG_KEYBOARD_CORGI) += corgikbd.o -obj-$(CONFIG_KEYBOARD_SPITZ) += spitzkbd.o -obj-$(CONFIG_KEYBOARD_TOSA) += tosakbd.o +obj-$(CONFIG_KEYBOARD_EP93XX) += ep93xx_keypad.o +obj-$(CONFIG_KEYBOARD_GPIO) += gpio_keys.o obj-$(CONFIG_KEYBOARD_HIL) += hil_kbd.o obj-$(CONFIG_KEYBOARD_HIL_OLD) += hilkbd.o -obj-$(CONFIG_KEYBOARD_OMAP) += omap-keypad.o -obj-$(CONFIG_KEYBOARD_PXA27x) += pxa27x_keypad.o -obj-$(CONFIG_KEYBOARD_PXA930_ROTARY) += pxa930_rotary.o -obj-$(CONFIG_KEYBOARD_AAED2000) += aaed2000_kbd.o -obj-$(CONFIG_KEYBOARD_GPIO) += gpio_keys.o obj-$(CONFIG_KEYBOARD_HP6XX) += jornada680_kbd.o obj-$(CONFIG_KEYBOARD_HP7XX) += jornada720_kbd.o +obj-$(CONFIG_KEYBOARD_LKKBD) += lkkbd.o +obj-$(CONFIG_KEYBOARD_LM8323) += lm8323.o +obj-$(CONFIG_KEYBOARD_LOCOMO) += locomokbd.o obj-$(CONFIG_KEYBOARD_MAPLE) += maple_keyb.o -obj-$(CONFIG_KEYBOARD_BFIN) += bf54x-keys.o +obj-$(CONFIG_KEYBOARD_MATRIX) += matrix_keypad.o +obj-$(CONFIG_KEYBOARD_NEWTON) += newtonkbd.o +obj-$(CONFIG_KEYBOARD_OMAP) += omap-keypad.o +obj-$(CONFIG_KEYBOARD_PXA27x) += pxa27x_keypad.o +obj-$(CONFIG_KEYBOARD_PXA930_ROTARY) += pxa930_rotary.o obj-$(CONFIG_KEYBOARD_SH_KEYSC) += sh_keysc.o +obj-$(CONFIG_KEYBOARD_SPITZ) += spitzkbd.o +obj-$(CONFIG_KEYBOARD_STOWAWAY) += stowaway.o +obj-$(CONFIG_KEYBOARD_SUNKBD) += sunkbd.o +obj-$(CONFIG_KEYBOARD_TOSA) += tosakbd.o +obj-$(CONFIG_KEYBOARD_XTKBD) += xtkbd.o diff --git a/drivers/input/keyboard/atkbd.c b/drivers/input/keyboard/atkbd.c index df3f8aa6811..6c6a09b1c0f 100644 --- a/drivers/input/keyboard/atkbd.c +++ b/drivers/input/keyboard/atkbd.c @@ -880,6 +880,14 @@ static unsigned int atkbd_hp_zv6100_forced_release_keys[] = { }; /* + * Perform fixup for HP (Compaq) Presario R4000 R4100 R4200 that don't generate + * release for their volume buttons + */ +static unsigned int atkbd_hp_r4000_forced_release_keys[] = { + 0xae, 0xb0, -1U +}; + +/* * Samsung NC10,NC20 with Fn+F? key release not working */ static unsigned int atkbd_samsung_forced_release_keys[] = { @@ -895,6 +903,13 @@ static unsigned int atkbd_amilo_pa1510_forced_release_keys[] = { }; /* + * Amilo Pi 3525 key release for Fn+Volume keys not working + */ +static unsigned int atkbd_amilo_pi3525_forced_release_keys[] = { + 0x20, 0xa0, 0x2e, 0xae, 0x30, 0xb0, -1U +}; + +/* * Amilo Xi 3650 key release for light touch bar not working */ static unsigned int atkbd_amilo_xi3650_forced_release_keys[] = { @@ -902,6 +917,13 @@ static unsigned int atkbd_amilo_xi3650_forced_release_keys[] = { }; /* + * Soltech TA12 system with broken key release on volume keys and mute key + */ +static unsigned int atkdb_soltech_ta12_forced_release_keys[] = { + 0xa0, 0xae, 0xb0, -1U +}; + +/* * atkbd_set_keycode_table() initializes keyboard's keycode table * according to the selected scancode set */ @@ -1523,6 +1545,33 @@ static struct dmi_system_id atkbd_dmi_quirk_table[] __initdata = { .driver_data = atkbd_hp_zv6100_forced_release_keys, }, { + .ident = "HP Presario R4000", + .matches = { + DMI_MATCH(DMI_SYS_VENDOR, "Hewlett-Packard"), + DMI_MATCH(DMI_PRODUCT_NAME, "Presario R4000"), + }, + .callback = atkbd_setup_forced_release, + .driver_data = atkbd_hp_r4000_forced_release_keys, + }, + { + .ident = "HP Presario R4100", + .matches = { + DMI_MATCH(DMI_SYS_VENDOR, "Hewlett-Packard"), + DMI_MATCH(DMI_PRODUCT_NAME, "Presario R4100"), + }, + .callback = atkbd_setup_forced_release, + .driver_data = atkbd_hp_r4000_forced_release_keys, + }, + { + .ident = "HP Presario R4200", + .matches = { + DMI_MATCH(DMI_SYS_VENDOR, "Hewlett-Packard"), + DMI_MATCH(DMI_PRODUCT_NAME, "Presario R4200"), + }, + .callback = atkbd_setup_forced_release, + .driver_data = atkbd_hp_r4000_forced_release_keys, + }, + { .ident = "Inventec Symphony", .matches = { DMI_MATCH(DMI_SYS_VENDOR, "INVENTEC"), @@ -1568,6 +1617,15 @@ static struct dmi_system_id atkbd_dmi_quirk_table[] __initdata = { .driver_data = atkbd_amilo_pa1510_forced_release_keys, }, { + .ident = "Fujitsu Amilo Pi 3525", + .matches = { + DMI_MATCH(DMI_SYS_VENDOR, "FUJITSU SIEMENS"), + DMI_MATCH(DMI_PRODUCT_NAME, "AMILO Pi 3525"), + }, + .callback = atkbd_setup_forced_release, + .driver_data = atkbd_amilo_pi3525_forced_release_keys, + }, + { .ident = "Fujitsu Amilo Xi 3650", .matches = { DMI_MATCH(DMI_SYS_VENDOR, "FUJITSU SIEMENS"), @@ -1576,6 +1634,15 @@ static struct dmi_system_id atkbd_dmi_quirk_table[] __initdata = { .callback = atkbd_setup_forced_release, .driver_data = atkbd_amilo_xi3650_forced_release_keys, }, + { + .ident = "Soltech Corporation TA12", + .matches = { + DMI_MATCH(DMI_SYS_VENDOR, "Soltech Corporation"), + DMI_MATCH(DMI_PRODUCT_NAME, "TA12"), + }, + .callback = atkbd_setup_forced_release, + .driver_data = atkdb_soltech_ta12_forced_release_keys, + }, { } }; diff --git a/drivers/input/keyboard/ep93xx_keypad.c b/drivers/input/keyboard/ep93xx_keypad.c new file mode 100644 index 00000000000..181d30e3018 --- /dev/null +++ b/drivers/input/keyboard/ep93xx_keypad.c @@ -0,0 +1,470 @@ +/* + * Driver for the Cirrus EP93xx matrix keypad controller. + * + * Copyright (c) 2008 H Hartley Sweeten <hsweeten@visionengravers.com> + * + * Based on the pxa27x matrix keypad controller by Rodolfo Giometti. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + * NOTE: + * + * The 3-key reset is triggered by pressing the 3 keys in + * Row 0, Columns 2, 4, and 7 at the same time. This action can + * be disabled by setting the EP93XX_KEYPAD_DISABLE_3_KEY flag. + * + * Normal operation for the matrix does not autorepeat the key press. + * This action can be enabled by setting the EP93XX_KEYPAD_AUTOREPEAT + * flag. + */ + +#include <linux/platform_device.h> +#include <linux/interrupt.h> +#include <linux/input.h> +#include <linux/clk.h> + +#include <mach/hardware.h> +#include <mach/gpio.h> +#include <mach/ep93xx_keypad.h> + +/* + * Keypad Interface Register offsets + */ +#define KEY_INIT 0x00 /* Key Scan Initialization register */ +#define KEY_DIAG 0x04 /* Key Scan Diagnostic register */ +#define KEY_REG 0x08 /* Key Value Capture register */ + +/* Key Scan Initialization Register bit defines */ +#define KEY_INIT_DBNC_MASK (0x00ff0000) +#define KEY_INIT_DBNC_SHIFT (16) +#define KEY_INIT_DIS3KY (1<<15) +#define KEY_INIT_DIAG (1<<14) +#define KEY_INIT_BACK (1<<13) +#define KEY_INIT_T2 (1<<12) +#define KEY_INIT_PRSCL_MASK (0x000003ff) +#define KEY_INIT_PRSCL_SHIFT (0) + +/* Key Scan Diagnostic Register bit defines */ +#define KEY_DIAG_MASK (0x0000003f) +#define KEY_DIAG_SHIFT (0) + +/* Key Value Capture Register bit defines */ +#define KEY_REG_K (1<<15) +#define KEY_REG_INT (1<<14) +#define KEY_REG_2KEYS (1<<13) +#define KEY_REG_1KEY (1<<12) +#define KEY_REG_KEY2_MASK (0x00000fc0) +#define KEY_REG_KEY2_SHIFT (6) +#define KEY_REG_KEY1_MASK (0x0000003f) +#define KEY_REG_KEY1_SHIFT (0) + +#define keypad_readl(off) __raw_readl(keypad->mmio_base + (off)) +#define keypad_writel(v, off) __raw_writel((v), keypad->mmio_base + (off)) + +#define MAX_MATRIX_KEY_NUM (MAX_MATRIX_KEY_ROWS * MAX_MATRIX_KEY_COLS) + +struct ep93xx_keypad { + struct ep93xx_keypad_platform_data *pdata; + + struct clk *clk; + struct input_dev *input_dev; + void __iomem *mmio_base; + + int irq; + int enabled; + + int key1; + int key2; + + unsigned int matrix_keycodes[MAX_MATRIX_KEY_NUM]; +}; + +static void ep93xx_keypad_build_keycode(struct ep93xx_keypad *keypad) +{ + struct ep93xx_keypad_platform_data *pdata = keypad->pdata; + struct input_dev *input_dev = keypad->input_dev; + int i; + + for (i = 0; i < pdata->matrix_key_map_size; i++) { + unsigned int key = pdata->matrix_key_map[i]; + int row = (key >> 28) & 0xf; + int col = (key >> 24) & 0xf; + int code = key & 0xffffff; + + keypad->matrix_keycodes[(row << 3) + col] = code; + __set_bit(code, input_dev->keybit); + } +} + +static irqreturn_t ep93xx_keypad_irq_handler(int irq, void *dev_id) +{ + struct ep93xx_keypad *keypad = dev_id; + struct input_dev *input_dev = keypad->input_dev; + unsigned int status = keypad_readl(KEY_REG); + int keycode, key1, key2; + + keycode = (status & KEY_REG_KEY1_MASK) >> KEY_REG_KEY1_SHIFT; + key1 = keypad->matrix_keycodes[keycode]; + + keycode = (status & KEY_REG_KEY2_MASK) >> KEY_REG_KEY2_SHIFT; + key2 = keypad->matrix_keycodes[keycode]; + + if (status & KEY_REG_2KEYS) { + if (keypad->key1 && key1 != keypad->key1 && key2 != keypad->key1) + input_report_key(input_dev, keypad->key1, 0); + + if (keypad->key2 && key1 != keypad->key2 && key2 != keypad->key2) + input_report_key(input_dev, keypad->key2, 0); + + input_report_key(input_dev, key1, 1); + input_report_key(input_dev, key2, 1); + + keypad->key1 = key1; + keypad->key2 = key2; + + } else if (status & KEY_REG_1KEY) { + if (keypad->key1 && key1 != keypad->key1) + input_report_key(input_dev, keypad->key1, 0); + + if (keypad->key2 && key1 != keypad->key2) + input_report_key(input_dev, keypad->key2, 0); + + input_report_key(input_dev, key1, 1); + + keypad->key1 = key1; + keypad->key2 = 0; + + } else { + input_report_key(input_dev, keypad->key1, 0); + input_report_key(input_dev, keypad->key2, 0); + + keypad->key1 = keypad->key2 = 0; + } + input_sync(input_dev); + + return IRQ_HANDLED; +} + +static void ep93xx_keypad_config(struct ep93xx_keypad *keypad) +{ + struct ep93xx_keypad_platform_data *pdata = keypad->pdata; + unsigned int val = 0; + + clk_set_rate(keypad->clk, pdata->flags & EP93XX_KEYPAD_KDIV); + + if (pdata->flags & EP93XX_KEYPAD_DISABLE_3_KEY) + val |= KEY_INIT_DIS3KY; + if (pdata->flags & EP93XX_KEYPAD_DIAG_MODE) + val |= KEY_INIT_DIAG; + if (pdata->flags & EP93XX_KEYPAD_BACK_DRIVE) + val |= KEY_INIT_BACK; + if (pdata->flags & EP93XX_KEYPAD_TEST_MODE) + val |= KEY_INIT_T2; + + val |= ((pdata->debounce << KEY_INIT_DBNC_SHIFT) & KEY_INIT_DBNC_MASK); + + val |= ((pdata->prescale << KEY_INIT_PRSCL_SHIFT) & KEY_INIT_PRSCL_MASK); + + keypad_writel(val, KEY_INIT); +} + +static int ep93xx_keypad_open(struct input_dev *pdev) +{ + struct ep93xx_keypad *keypad = input_get_drvdata(pdev); + + if (!keypad->enabled) { + ep93xx_keypad_config(keypad); + clk_enable(keypad->clk); + keypad->enabled = 1; + } + + return 0; +} + +static void ep93xx_keypad_close(struct input_dev *pdev) +{ + struct ep93xx_keypad *keypad = input_get_drvdata(pdev); + + if (keypad->enabled) { + clk_disable(keypad->clk); + keypad->enabled = 0; + } +} + + +#ifdef CONFIG_PM +/* + * NOTE: I don't know if this is correct, or will work on the ep93xx. + * + * None of the existing ep93xx drivers have power management support. + * But, this is basically what the pxa27x_keypad driver does. + */ +static int ep93xx_keypad_suspend(struct platform_device *pdev, + pm_message_t state) +{ + struct ep93xx_keypad *keypad = platform_get_drvdata(pdev); + struct input_dev *input_dev = keypad->input_dev; + + mutex_lock(&input_dev->mutex); + + if (keypad->enabled) { + clk_disable(keypad->clk); + keypad->enabled = 0; + } + + mutex_unlock(&input_dev->mutex); + + if (device_may_wakeup(&pdev->dev)) + enable_irq_wake(keypad->irq); + + return 0; +} + +static int ep93xx_keypad_resume(struct platform_device *pdev) +{ + struct ep93xx_keypad *keypad = platform_get_drvdata(pdev); + struct input_dev *input_dev = keypad->input_dev; + + if (device_may_wakeup(&pdev->dev)) + disable_irq_wake(keypad->irq); + + mutex_lock(&input_dev->mutex); + + if (input_dev->users) { + if (!keypad->enabled) { + ep93xx_keypad_config(keypad); + clk_enable(keypad->clk); + keypad->enabled = 1; + } + } + + mutex_unlock(&input_dev->mutex); + + return 0; +} +#else /* !CONFIG_PM */ +#define ep93xx_keypad_suspend NULL +#define ep93xx_keypad_resume NULL +#endif /* !CONFIG_PM */ + +static int __devinit ep93xx_keypad_probe(struct platform_device *pdev) +{ + struct ep93xx_keypad *keypad; + struct ep93xx_keypad_platform_data *pdata = pdev->dev.platform_data; + struct input_dev *input_dev; + struct resource *res; + int irq, err, i, gpio; + + if (!pdata || + !pdata->matrix_key_rows || + pdata->matrix_key_rows > MAX_MATRIX_KEY_ROWS || + !pdata->matrix_key_cols || + pdata->matrix_key_cols > MAX_MATRIX_KEY_COLS) { + dev_err(&pdev->dev, "invalid or missing platform data\n"); + return -EINVAL; + } + + keypad = kzalloc(sizeof(struct ep93xx_keypad), GFP_KERNEL); + if (!keypad) { + dev_err(&pdev->dev, "failed to allocate driver data\n"); + return -ENOMEM; + } + + keypad->pdata = pdata; + + irq = platform_get_irq(pdev, 0); + if (irq < 0) { + dev_err(&pdev->dev, "failed to get keypad irq\n"); + err = -ENXIO; + goto failed_free; + } + + res = platform_get_resource(pdev, IORESOURCE_MEM, 0); + if (!res) { + dev_err(&pdev->dev, "failed to get I/O memory\n"); + err = -ENXIO; + goto failed_free; + } + + res = request_mem_region(res->start, resource_size(res), pdev->name); + if (!res) { + dev_err(&pdev->dev, "failed to request I/O memory\n"); + err = -EBUSY; + goto failed_free; + } + + keypad->mmio_base = ioremap(res->start, resource_size(res)); + if (keypad->mmio_base == NULL) { + dev_err(&pdev->dev, "failed to remap I/O memory\n"); + err = -ENXIO; + goto failed_free_mem; + } + + /* Request the needed GPIO's */ + gpio = EP93XX_GPIO_LINE_ROW0; + for (i = 0; i < keypad->pdata->matrix_key_rows; i++, gpio++) { + err = gpio_request(gpio, pdev->name); + if (err) { + dev_err(&pdev->dev, "failed to request gpio-%d\n", + gpio); + goto failed_free_rows; + } + } + + gpio = EP93XX_GPIO_LINE_COL0; + for (i = 0; i < keypad->pdata->matrix_key_cols; i++, gpio++) { + err = gpio_request(gpio, pdev->name); + if (err) { + dev_err(&pdev->dev, "failed to request gpio-%d\n", + gpio); + goto failed_free_cols; + } + } + + keypad->clk = clk_get(&pdev->dev, "key_clk"); + if (IS_ERR(keypad->clk)) { + dev_err(&pdev->dev, "failed to get keypad clock\n"); + err = PTR_ERR(keypad->clk); + goto failed_free_io; + } + + /* Create and register the input driver */ + input_dev = input_allocate_device(); + if (!input_dev) { + dev_err(&pdev->dev, "failed to allocate input device\n"); + err = -ENOMEM; + goto failed_put_clk; + } + + keypad->input_dev = input_dev; + + input_dev->name = pdev->name; + input_dev->id.bustype = BUS_HOST; + input_dev->open = ep93xx_keypad_open; + input_dev->close = ep93xx_keypad_close; + input_dev->dev.parent = &pdev->dev; + input_dev->keycode = keypad->matrix_keycodes; + input_dev->keycodesize = sizeof(keypad->matrix_keycodes[0]); + input_dev->keycodemax = ARRAY_SIZE(keypad->matrix_keycodes); + + input_set_drvdata(input_dev, keypad); + + input_dev->evbit[0] = BIT_MASK(EV_KEY); + if (keypad->pdata->flags & EP93XX_KEYPAD_AUTOREPEAT) + input_dev->evbit[0] |= BIT_MASK(EV_REP); + + ep93xx_keypad_build_keycode(keypad); + platform_set_drvdata(pdev, keypad); + + err = request_irq(irq, ep93xx_keypad_irq_handler, IRQF_DISABLED, + pdev->name, keypad); + if (err) { + dev_err(&pdev->dev, "failed to request IRQ\n"); + goto failed_free_dev; + } + + keypad->irq = irq; + + /* Register the input device */ + err = input_register_device(input_dev); + if (err) { + dev_err(&pdev->dev, "failed to register input device\n"); + goto failed_free_irq; + } + + device_init_wakeup(&pdev->dev, 1); + + return 0; + +failed_free_irq: + free_irq(irq, pdev); + platform_set_drvdata(pdev, NULL); +failed_free_dev: + input_free_device(input_dev); +failed_put_clk: + clk_put(keypad->clk); +failed_free_io: + i = keypad->pdata->matrix_key_cols - 1; + gpio = EP93XX_GPIO_LINE_COL0 + i; +failed_free_cols: + for ( ; i >= 0; i--, gpio--) + gpio_free(gpio); + i = keypad->pdata->matrix_key_rows - 1; + gpio = EP93XX_GPIO_LINE_ROW0 + i; +failed_free_rows: + for ( ; i >= 0; i--, gpio--) + gpio_free(gpio); + iounmap(keypad->mmio_base); +failed_free_mem: + release_mem_region(res->start, resource_size(res)); +failed_free: + kfree(keypad); + return err; +} + +static int __devexit ep93xx_keypad_remove(struct platform_device *pdev) +{ + struct ep93xx_keypad *keypad = platform_get_drvdata(pdev); + struct resource *res; + int i, gpio; + + free_irq(keypad->irq, pdev); + + platform_set_drvdata(pdev, NULL); + + if (keypad->enabled) + clk_disable(keypad->clk); + clk_put(keypad->clk); + + input_unregister_device(keypad->input_dev); + + i = keypad->pdata->matrix_key_cols - 1; + gpio = EP93XX_GPIO_LINE_COL0 + i; + for ( ; i >= 0; i--, gpio--) + gpio_free(gpio); + + i = keypad->pdata->matrix_key_rows - 1; + gpio = EP93XX_GPIO_LINE_ROW0 + i; + for ( ; i >= 0; i--, gpio--) + gpio_free(gpio); + + iounmap(keypad->mmio_base); + + res = platform_get_resource(pdev, IORESOURCE_MEM, 0); + release_mem_region(res->start, resource_size(res)); + + kfree(keypad); + + return 0; +} + +static struct platform_driver ep93xx_keypad_driver = { + .driver = { + .name = "ep93xx-keypad", + .owner = THIS_MODULE, + }, + .probe = ep93xx_keypad_probe, + .remove = __devexit_p(ep93xx_keypad_remove), + .suspend = ep93xx_keypad_suspend, + .resume = ep93xx_keypad_resume, +}; + +static int __init ep93xx_keypad_init(void) +{ + return platform_driver_register(&ep93xx_keypad_driver); +} + +static void __exit ep93xx_keypad_exit(void) +{ + platform_driver_unregister(&ep93xx_keypad_driver); +} + +module_init(ep93xx_keypad_init); +module_exit(ep93xx_keypad_exit); + +MODULE_LICENSE("GPL"); +MODULE_AUTHOR("H Hartley Sweeten <hsweeten@visionengravers.com>"); +MODULE_DESCRIPTION("EP93xx Matrix Keypad Controller"); +MODULE_ALIAS("platform:ep93xx-keypad"); diff --git a/drivers/input/keyboard/gpio_keys.c b/drivers/input/keyboard/gpio_keys.c index ad67d763fdb..efed0c9e242 100644 --- a/drivers/input/keyboard/gpio_keys.c +++ b/drivers/input/keyboard/gpio_keys.c @@ -22,6 +22,7 @@ #include <linux/platform_device.h> #include <linux/input.h> #include <linux/gpio_keys.h> +#include <linux/workqueue.h> #include <asm/gpio.h> @@ -29,6 +30,7 @@ struct gpio_button_data { struct gpio_keys_button *button; struct input_dev *input; struct timer_list timer; + struct work_struct work; }; struct gpio_keys_drvdata { @@ -36,8 +38,10 @@ struct gpio_keys_drvdata { struct gpio_button_data data[0]; }; -static void gpio_keys_report_event(struct gpio_button_data *bdata) +static void gpio_keys_report_event(struct work_struct *work) { + struct gpio_button_data *bdata = + container_of(work, struct gpio_button_data, work); struct gpio_keys_button *button = bdata->button; struct input_dev *input = bdata->input; unsigned int type = button->type ?: EV_KEY; @@ -47,11 +51,11 @@ static void gpio_keys_report_event(struct gpio_button_data *bdata) input_sync(input); } -static void gpio_check_button(unsigned long _data) +static void gpio_keys_timer(unsigned long _data) { struct gpio_button_data *data = (struct gpio_button_data *)_data; - gpio_keys_report_event(data); + schedule_work(&data->work); } static irqreturn_t gpio_keys_isr(int irq, void *dev_id) @@ -65,7 +69,7 @@ static irqreturn_t gpio_keys_isr(int irq, void *dev_id) mod_timer(&bdata->timer, jiffies + msecs_to_jiffies(button->debounce_interval)); else - gpio_keys_report_event(bdata); + schedule_work(&bdata->work); return IRQ_HANDLED; } @@ -113,7 +117,8 @@ static int __devinit gpio_keys_probe(struct platform_device *pdev) bdata->input = input; bdata->button = button; setup_timer(&bdata->timer, - gpio_check_button, (unsigned long)bdata); + gpio_keys_timer, (unsigned long)bdata); + INIT_WORK(&bdata->work, gpio_keys_report_event); error = gpio_request(button->gpio, button->desc ?: "gpio_keys"); if (error < 0) { @@ -142,8 +147,7 @@ static int __devinit gpio_keys_probe(struct platform_device *pdev) } error = request_irq(irq, gpio_keys_isr, - IRQF_SAMPLE_RANDOM | IRQF_TRIGGER_RISING | - IRQF_TRIGGER_FALLING, + IRQF_TRIGGER_RISING | IRQF_TRIGGER_FALLING, button->desc ? button->desc : "gpio_keys", bdata); if (error) { @@ -175,6 +179,7 @@ static int __devinit gpio_keys_probe(struct platform_device *pdev) free_irq(gpio_to_irq(pdata->buttons[i].gpio), &ddata->data[i]); if (pdata->buttons[i].debounce_interval) del_timer_sync(&ddata->data[i].timer); + cancel_work_sync(&ddata->data[i].work); gpio_free(pdata->buttons[i].gpio); } @@ -200,6 +205,7 @@ static int __devexit gpio_keys_remove(struct platform_device *pdev) free_irq(irq, &ddata->data[i]); if (pdata->buttons[i].debounce_interval) del_timer_sync(&ddata->data[i].timer); + cancel_work_sync(&ddata->data[i].work); gpio_free(pdata->buttons[i].gpio); } diff --git a/drivers/input/keyboard/lm8323.c b/drivers/input/keyboard/lm8323.c new file mode 100644 index 00000000000..574eda2a495 --- /dev/null +++ b/drivers/input/keyboard/lm8323.c @@ -0,0 +1,878 @@ +/* + * drivers/i2c/chips/lm8323.c + * + * Copyright (C) 2007-2009 Nokia Corporation + * + * Written by Daniel Stone <daniel.stone@nokia.com> + * Timo O. Karjalainen <timo.o.karjalainen@nokia.com> + * + * Updated by Felipe Balbi <felipe.balbi@nokia.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation (version 2 of the License only). + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ + +#include <linux/module.h> +#include <linux/i2c.h> +#include <linux/interrupt.h> +#include <linux/sched.h> +#include <linux/mutex.h> +#include <linux/delay.h> +#include <linux/input.h> +#include <linux/leds.h> +#include <linux/i2c/lm8323.h> + +/* Commands to send to the chip. */ +#define LM8323_CMD_READ_ID 0x80 /* Read chip ID. */ +#define LM8323_CMD_WRITE_CFG 0x81 /* Set configuration item. */ +#define LM8323_CMD_READ_INT 0x82 /* Get interrupt status. */ +#define LM8323_CMD_RESET 0x83 /* Reset, same as external one */ +#define LM8323_CMD_WRITE_PORT_SEL 0x85 /* Set GPIO in/out. */ +#define LM8323_CMD_WRITE_PORT_STATE 0x86 /* Set GPIO pullup. */ +#define LM8323_CMD_READ_PORT_SEL 0x87 /* Get GPIO in/out. */ +#define LM8323_CMD_READ_PORT_STATE 0x88 /* Get GPIO pullup. */ +#define LM8323_CMD_READ_FIFO 0x89 /* Read byte from FIFO. */ +#define LM8323_CMD_RPT_READ_FIFO 0x8a /* Read FIFO (no increment). */ +#define LM8323_CMD_SET_ACTIVE 0x8b /* Set active time. */ +#define LM8323_CMD_READ_ERR 0x8c /* Get error status. */ +#define LM8323_CMD_READ_ROTATOR 0x8e /* Read rotator status. */ +#define LM8323_CMD_SET_DEBOUNCE 0x8f /* Set debouncing time. */ +#define LM8323_CMD_SET_KEY_SIZE 0x90 /* Set keypad size. */ +#define LM8323_CMD_READ_KEY_SIZE 0x91 /* Get keypad size. */ +#define LM8323_CMD_READ_CFG 0x92 /* Get configuration item. */ +#define LM8323_CMD_WRITE_CLOCK 0x93 /* Set clock config. */ +#define LM8323_CMD_READ_CLOCK 0x94 /* Get clock config. */ +#define LM8323_CMD_PWM_WRITE 0x95 /* Write PWM script. */ +#define LM8323_CMD_START_PWM 0x96 /* Start PWM engine. */ +#define LM8323_CMD_STOP_PWM 0x97 /* Stop PWM engine. */ + +/* Interrupt status. */ +#define INT_KEYPAD 0x01 /* Key event. */ +#define INT_ROTATOR 0x02 /* Rotator event. */ +#define INT_ERROR 0x08 /* Error: use CMD_READ_ERR. */ +#define INT_NOINIT 0x10 /* Lost configuration. */ +#define INT_PWM1 0x20 /* PWM1 stopped. */ +#define INT_PWM2 0x40 /* PWM2 stopped. */ +#define INT_PWM3 0x80 /* PWM3 stopped. */ + +/* Errors (signalled by INT_ERROR, read with CMD_READ_ERR). */ +#define ERR_BADPAR 0x01 /* Bad parameter. */ +#define ERR_CMDUNK 0x02 /* Unknown command. */ +#define ERR_KEYOVR 0x04 /* Too many keys pressed. */ +#define ERR_FIFOOVER 0x40 /* FIFO overflow. */ + +/* Configuration keys (CMD_{WRITE,READ}_CFG). */ +#define CFG_MUX1SEL 0x01 /* Select MUX1_OUT input. */ +#define CFG_MUX1EN 0x02 /* Enable MUX1_OUT. */ +#define CFG_MUX2SEL 0x04 /* Select MUX2_OUT input. */ +#define CFG_MUX2EN 0x08 /* Enable MUX2_OUT. */ +#define CFG_PSIZE 0x20 /* Package size (must be 0). */ +#define CFG_ROTEN 0x40 /* Enable rotator. */ + +/* Clock settings (CMD_{WRITE,READ}_CLOCK). */ +#define CLK_RCPWM_INTERNAL 0x00 +#define CLK_RCPWM_EXTERNAL 0x03 +#define CLK_SLOWCLKEN 0x08 /* Enable 32.768kHz clock. */ +#define CLK_SLOWCLKOUT 0x40 /* Enable slow pulse output. */ + +/* The possible addresses corresponding to CONFIG1 and CONFIG2 pin wirings. */ +#define LM8323_I2C_ADDR00 (0x84 >> 1) /* 1000 010x */ +#define LM8323_I2C_ADDR01 (0x86 >> 1) /* 1000 011x */ +#define LM8323_I2C_ADDR10 (0x88 >> 1) /* 1000 100x */ +#define LM8323_I2C_ADDR11 (0x8A >> 1) /* 1000 101x */ + +/* Key event fifo length */ +#define LM8323_FIFO_LEN 15 + +/* Commands for PWM engine; feed in with PWM_WRITE. */ +/* Load ramp counter from duty cycle field (range 0 - 0xff). */ +#define PWM_SET(v) (0x4000 | ((v) & 0xff)) +/* Go to start of script. */ +#define PWM_GOTOSTART 0x0000 +/* + * Stop engine (generates interrupt). If reset is 1, clear the program + * counter, else leave it. + */ +#define PWM_END(reset) (0xc000 | (!!(reset) << 11)) +/* + * Ramp. If s is 1, divide clock by 512, else divide clock by 16. + * Take t clock scales (up to 63) per step, for n steps (up to 126). + * If u is set, ramp up, else ramp down. + */ +#define PWM_RAMP(s, t, n, u) ((!!(s) << 14) | ((t) & 0x3f) << 8 | \ + ((n) & 0x7f) | ((u) ? 0 : 0x80)) +/* + * Loop (i.e. jump back to pos) for a given number of iterations (up to 63). + * If cnt is zero, execute until PWM_END is encountered. + */ +#define PWM_LOOP(cnt, pos) (0xa000 | (((cnt) & 0x3f) << 7) | \ + ((pos) & 0x3f)) +/* + * Wait for trigger. Argument is a mask of channels, shifted by the channel + * number, e.g. 0xa for channels 3 and 1. Note that channels are numbered + * from 1, not 0. + */ +#define PWM_WAIT_TRIG(chans) (0xe000 | (((chans) & 0x7) << 6)) +/* Send trigger. Argument is same as PWM_WAIT_TRIG. */ +#define PWM_SEND_TRIG(chans) (0xe000 | ((chans) & 0x7)) + +struct lm8323_pwm { + int id; + int fade_time; + int brightness; + int desired_brightness; + bool enabled; + bool running; + /* pwm lock */ + struct mutex lock; + struct work_struct work; + struct led_classdev cdev; + struct lm8323_chip *chip; +}; + +struct lm8323_chip { + /* device lock */ + struct mutex lock; + struct i2c_client *client; + struct work_struct work; + struct input_dev *idev; + bool kp_enabled; + bool pm_suspend; + unsigned keys_down; + char phys[32]; + unsigned short keymap[LM8323_KEYMAP_SIZE]; + int size_x; + int size_y; + int debounce_time; + int active_time; + struct lm8323_pwm pwm[LM8323_NUM_PWMS]; +}; + +#define client_to_lm8323(c) container_of(c, struct lm8323_chip, client) +#define dev_to_lm8323(d) container_of(d, struct lm8323_chip, client->dev) +#define work_to_lm8323(w) container_of(w, struct lm8323_chip, work) +#define cdev_to_pwm(c) container_of(c, struct lm8323_pwm, cdev) +#define work_to_pwm(w) container_of(w, struct lm8323_pwm, work) + +#define LM8323_MAX_DATA 8 + +/* + * To write, we just access the chip's address in write mode, and dump the + * command and data out on the bus. The command byte and data are taken as + * sequential u8s out of varargs, to a maximum of LM8323_MAX_DATA. + */ +static int lm8323_write(struct lm8323_chip *lm, int len, ...) +{ + int ret, i; + va_list ap; + u8 data[LM8323_MAX_DATA]; + + va_start(ap, len); + + if (unlikely(len > LM8323_MAX_DATA)) { + dev_err(&lm->client->dev, "tried to send %d bytes\n", len); + va_end(ap); + return 0; + } + + for (i = 0; i < len; i++) + data[i] = va_arg(ap, int); + + va_end(ap); + + /* + * If the host is asleep while we send the data, we can get a NACK + * back while it wakes up, so try again, once. + */ + ret = i2c_master_send(lm->client, data, len); + if (unlikely(ret == -EREMOTEIO)) + ret = i2c_master_send(lm->client, data, len); + if (unlikely(ret != len)) + dev_err(&lm->client->dev, "sent %d bytes of %d total\n", + len, ret); + + return ret; +} + +/* + * To read, we first send the command byte to the chip and end the transaction, + * then access the chip in read mode, at which point it will send the data. + */ +static int lm8323_read(struct lm8323_chip *lm, u8 cmd, u8 *buf, int len) +{ + int ret; + + /* + * If the host is asleep while we send the byte, we can get a NACK + * back while it wakes up, so try again, once. + */ + ret = i2c_master_send(lm->client, &cmd, 1); + if (unlikely(ret == -EREMOTEIO)) + ret = i2c_master_send(lm->client, &cmd, 1); + if (unlikely(ret != 1)) { + dev_err(&lm->client->dev, "sending read cmd 0x%02x failed\n", + cmd); + return 0; + } + + ret = i2c_master_recv(lm->client, buf, len); + if (unlikely(ret != len)) + dev_err(&lm->client->dev, "wanted %d bytes, got %d\n", + len, ret); + + return ret; +} + +/* + * Set the chip active time (idle time before it enters halt). + */ +static void lm8323_set_active_time(struct lm8323_chip *lm, int time) +{ + lm8323_write(lm, 2, LM8323_CMD_SET_ACTIVE, time >> 2); +} + +/* + * The signals are AT-style: the low 7 bits are the keycode, and the top + * bit indicates the state (1 for down, 0 for up). + */ +static inline u8 lm8323_whichkey(u8 event) +{ + return event & 0x7f; +} + +static inline int lm8323_ispress(u8 event) +{ + return (event & 0x80) ? 1 : 0; +} + +static void process_keys(struct lm8323_chip *lm) +{ + u8 event; + u8 key_fifo[LM8323_FIFO_LEN + 1]; + int old_keys_down = lm->keys_down; + int ret; + int i = 0; + + /* + * Read all key events from the FIFO at once. Next READ_FIFO clears the + * FIFO even if we didn't read all events previously. + */ + ret = lm8323_read(lm, LM8323_CMD_READ_FIFO, key_fifo, LM8323_FIFO_LEN); + + if (ret < 0) { + dev_err(&lm->client->dev, "Failed reading fifo \n"); + return; + } + key_fifo[ret] = 0; + + while ((event = key_fifo[i++])) { + u8 key = lm8323_whichkey(event); + int isdown = lm8323_ispress(event); + unsigned short keycode = lm->keymap[key]; + + dev_vdbg(&lm->client->dev, "key 0x%02x %s\n", + key, isdown ? "down" : "up"); + + if (lm->kp_enabled) { + input_event(lm->idev, EV_MSC, MSC_SCAN, key); + input_report_key(lm->idev, keycode, isdown); + input_sync(lm->idev); + } + + if (isdown) + lm->keys_down++; + else + lm->keys_down--; + } + + /* + * Errata: We need to ensure that the chip never enters halt mode + * during a keypress, so set active time to 0. When it's released, + * we can enter halt again, so set the active time back to normal. + */ + if (!old_keys_down && lm->keys_down) + lm8323_set_active_time(lm, 0); + if (old_keys_down && !lm->keys_down) + lm8323_set_active_time(lm, lm->active_time); +} + +static void lm8323_process_error(struct lm8323_chip *lm) +{ + u8 error; + + if (lm8323_read(lm, LM8323_CMD_READ_ERR, &error, 1) == 1) { + if (error & ERR_FIFOOVER) + dev_vdbg(&lm->client->dev, "fifo overflow!\n"); + if (error & ERR_KEYOVR) + dev_vdbg(&lm->client->dev, + "more than two keys pressed\n"); + if (error & ERR_CMDUNK) + dev_vdbg(&lm->client->dev, + "unknown command submitted\n"); + if (error & ERR_BADPAR) + dev_vdbg(&lm->client->dev, "bad command parameter\n"); + } +} + +static void lm8323_reset(struct lm8323_chip *lm) +{ + /* The docs say we must pass 0xAA as the data byte. */ + lm8323_write(lm, 2, LM8323_CMD_RESET, 0xAA); +} + +static int lm8323_configure(struct lm8323_chip *lm) +{ + int keysize = (lm->size_x << 4) | lm->size_y; + int clock = (CLK_SLOWCLKEN | CLK_RCPWM_EXTERNAL); + int debounce = lm->debounce_time >> 2; + int active = lm->active_time >> 2; + + /* + * Active time must be greater than the debounce time: if it's + * a close-run thing, give ourselves a 12ms buffer. + */ + if (debounce >= active) + active = debounce + 3; + + lm8323_write(lm, 2, LM8323_CMD_WRITE_CFG, 0); + lm8323_write(lm, 2, LM8323_CMD_WRITE_CLOCK, clock); + lm8323_write(lm, 2, LM8323_CMD_SET_KEY_SIZE, keysize); + lm8323_set_active_time(lm, lm->active_time); + lm8323_write(lm, 2, LM8323_CMD_SET_DEBOUNCE, debounce); + lm8323_write(lm, 3, LM8323_CMD_WRITE_PORT_STATE, 0xff, 0xff); + lm8323_write(lm, 3, LM8323_CMD_WRITE_PORT_SEL, 0, 0); + + /* + * Not much we can do about errors at this point, so just hope + * for the best. + */ + + return 0; +} + +static void pwm_done(struct lm8323_pwm *pwm) +{ + mutex_lock(&pwm->lock); + pwm->running = false; + if (pwm->desired_brightness != pwm->brightness) + schedule_work(&pwm->work); + mutex_unlock(&pwm->lock); +} + +/* + * Bottom half: handle the interrupt by posting key events, or dealing with + * errors appropriately. + */ +static void lm8323_work(struct work_struct *work) +{ + struct lm8323_chip *lm = work_to_lm8323(work); + u8 ints; + int i; + + mutex_lock(&lm->lock); + + while ((lm8323_read(lm, LM8323_CMD_READ_INT, &ints, 1) == 1) && ints) { + if (likely(ints & INT_KEYPAD)) + process_keys(lm); + if (ints & INT_ROTATOR) { + /* We don't currently support the rotator. */ + dev_vdbg(&lm->client->dev, "rotator fired\n"); + } + if (ints & INT_ERROR) { + dev_vdbg(&lm->client->dev, "error!\n"); + lm8323_process_error(lm); + } + if (ints & INT_NOINIT) { + dev_err(&lm->client->dev, "chip lost config; " + "reinitialising\n"); + lm8323_configure(lm); + } + for (i = 0; i < LM8323_NUM_PWMS; i++) { + if (ints & (1 << (INT_PWM1 + i))) { + dev_vdbg(&lm->client->dev, + "pwm%d engine completed\n", i); + pwm_done(&lm->pwm[i]); + } + } + } + + mutex_unlock(&lm->lock); +} + +/* + * We cannot use I2C in interrupt context, so we just schedule work. + */ +static irqreturn_t lm8323_irq(int irq, void *data) +{ + struct lm8323_chip *lm = data; + + schedule_work(&lm->work); + + return IRQ_HANDLED; +} + +/* + * Read the chip ID. + */ +static int lm8323_read_id(struct lm8323_chip *lm, u8 *buf) +{ + int bytes; + + bytes = lm8323_read(lm, LM8323_CMD_READ_ID, buf, 2); + if (unlikely(bytes != 2)) + return -EIO; + + return 0; +} + +static void lm8323_write_pwm_one(struct lm8323_pwm *pwm, int pos, u16 cmd) +{ + lm8323_write(pwm->chip, 4, LM8323_CMD_PWM_WRITE, (pos << 2) | pwm->id, + (cmd & 0xff00) >> 8, cmd & 0x00ff); +} + +/* + * Write a script into a given PWM engine, concluding with PWM_END. + * If 'kill' is nonzero, the engine will be shut down at the end + * of the script, producing a zero output. Otherwise the engine + * will be kept running at the final PWM level indefinitely. + */ +static void lm8323_write_pwm(struct lm8323_pwm *pwm, int kill, + int len, const u16 *cmds) +{ + int i; + + for (i = 0; i < len; i++) + lm8323_write_pwm_one(pwm, i, cmds[i]); + + lm8323_write_pwm_one(pwm, i++, PWM_END(kill)); + lm8323_write(pwm->chip, 2, LM8323_CMD_START_PWM, pwm->id); + pwm->running = true; +} + +static void lm8323_pwm_work(struct work_struct *work) +{ + struct lm8323_pwm *pwm = work_to_pwm(work); + int div512, perstep, steps, hz, up, kill; + u16 pwm_cmds[3]; + int num_cmds = 0; + + mutex_lock(&pwm->lock); + + /* + * Do nothing if we're already at the requested level, + * or previous setting is not yet complete. In the latter + * case we will be called again when the previous PWM script + * finishes. + */ + if (pwm->running || pwm->desired_brightness == pwm->brightness) + goto out; + + kill = (pwm->desired_brightness == 0); + up = (pwm->desired_brightness > pwm->brightness); + steps = abs(pwm->desired_brightness - pwm->brightness); + + /* + * Convert time (in ms) into a divisor (512 or 16 on a refclk of + * 32768Hz), and number of ticks per step. + */ + if ((pwm->fade_time / steps) > (32768 / 512)) { + div512 = 1; + hz = 32768 / 512; + } else { + div512 = 0; + hz = 32768 / 16; + } + + perstep = (hz * pwm->fade_time) / (steps * 1000); + + if (perstep == 0) + perstep = 1; + else if (perstep > 63) + perstep = 63; + + while (steps) { + int s; + + s = min(126, steps); + pwm_cmds[num_cmds++] = PWM_RAMP(div512, perstep, s, up); + steps -= s; + } + + lm8323_write_pwm(pwm, kill, num_cmds, pwm_cmds); + pwm->brightness = pwm->desired_brightness; + + out: + mutex_unlock(&pwm->lock); +} + +static void lm8323_pwm_set_brightness(struct led_classdev *led_cdev, + enum led_brightness brightness) +{ + struct lm8323_pwm *pwm = cdev_to_pwm(led_cdev); + struct lm8323_chip *lm = pwm->chip; + + mutex_lock(&pwm->lock); + pwm->desired_brightness = brightness; + mutex_unlock(&pwm->lock); + + if (in_interrupt()) { + schedule_work(&pwm->work); + } else { + /* + * Schedule PWM work as usual unless we are going into suspend + */ + mutex_lock(&lm->lock); + if (likely(!lm->pm_suspend)) + schedule_work(&pwm->work); + else + lm8323_pwm_work(&pwm->work); + mutex_unlock(&lm->lock); + } +} + +static ssize_t lm8323_pwm_show_time(struct device *dev, + struct device_attribute *attr, char *buf) +{ + struct led_classdev *led_cdev = dev_get_drvdata(dev); + struct lm8323_pwm *pwm = cdev_to_pwm(led_cdev); + + return sprintf(buf, "%d\n", pwm->fade_time); +} + +static ssize_t lm8323_pwm_store_time(struct device *dev, + struct device_attribute *attr, const char *buf, size_t len) +{ + struct led_classdev *led_cdev = dev_get_drvdata(dev); + struct lm8323_pwm *pwm = cdev_to_pwm(led_cdev); + int ret; + unsigned long time; + + ret = strict_strtoul(buf, 10, &time); + /* Numbers only, please. */ + if (ret) + return -EINVAL; + + pwm->fade_time = time; + + return strlen(buf); +} +static DEVICE_ATTR(time, 0644, lm8323_pwm_show_time, lm8323_pwm_store_time); + +static int init_pwm(struct lm8323_chip *lm, int id, struct device *dev, + const char *name) +{ + struct lm8323_pwm *pwm; + + BUG_ON(id > 3); + + pwm = &lm->pwm[id - 1]; + + pwm->id = id; + pwm->fade_time = 0; + pwm->brightness = 0; + pwm->desired_brightness = 0; + pwm->running = false; + pwm->enabled = false; + INIT_WORK(&pwm->work, lm8323_pwm_work); + mutex_init(&pwm->lock); + pwm->chip = lm; + + if (name) { + pwm->cdev.name = name; + pwm->cdev.brightness_set = lm8323_pwm_set_brightness; + if (led_classdev_register(dev, &pwm->cdev) < 0) { + dev_err(dev, "couldn't register PWM %d\n", id); + return -1; + } + if (device_create_file(pwm->cdev.dev, + &dev_attr_time) < 0) { + dev_err(dev, "couldn't register time attribute\n"); + led_classdev_unregister(&pwm->cdev); + return -1; + } + pwm->enabled = true; + } + + return 0; +} + +static struct i2c_driver lm8323_i2c_driver; + +static ssize_t lm8323_show_disable(struct device *dev, + struct device_attribute *attr, char *buf) +{ + struct lm8323_chip *lm = dev_get_drvdata(dev); + + return sprintf(buf, "%u\n", !lm->kp_enabled); +} + +static ssize_t lm8323_set_disable(struct device *dev, + struct device_attribute *attr, + const char *buf, size_t count) +{ + struct lm8323_chip *lm = dev_get_drvdata(dev); + int ret; + unsigned long i; + + ret = strict_strtoul(buf, 10, &i); + + mutex_lock(&lm->lock); + lm->kp_enabled = !i; + mutex_unlock(&lm->lock); + + return count; +} +static DEVICE_ATTR(disable_kp, 0644, lm8323_show_disable, lm8323_set_disable); + +static int __devinit lm8323_probe(struct i2c_client *client, + const struct i2c_device_id *id) +{ + struct lm8323_platform_data *pdata = client->dev.platform_data; + struct input_dev *idev; + struct lm8323_chip *lm; + int i, err; + unsigned long tmo; + u8 data[2]; + + if (!pdata || !pdata->size_x || !pdata->size_y) { + dev_err(&client->dev, "missing platform_data\n"); + return -EINVAL; + } + + if (pdata->size_x > 8) { + dev_err(&client->dev, "invalid x size %d specified\n", + pdata->size_x); + return -EINVAL; + } + + if (pdata->size_y > 12) { + dev_err(&client->dev, "invalid y size %d specified\n", + pdata->size_y); + return -EINVAL; + } + + lm = kzalloc(sizeof *lm, GFP_KERNEL); + idev = input_allocate_device(); + if (!lm || !idev) { + err = -ENOMEM; + goto fail1; + } + + i2c_set_clientdata(client, lm); + + lm->client = client; + lm->idev = idev; + mutex_init(&lm->lock); + INIT_WORK(&lm->work, lm8323_work); + + lm->size_x = pdata->size_x; + lm->size_y = pdata->size_y; + dev_vdbg(&client->dev, "Keypad size: %d x %d\n", + lm->size_x, lm->size_y); + + lm->debounce_time = pdata->debounce_time; + lm->active_time = pdata->active_time; + + lm8323_reset(lm); + + /* Nothing's set up to service the IRQ yet, so just spin for max. + * 100ms until we can configure. */ + tmo = jiffies + msecs_to_jiffies(100); + while (lm8323_read(lm, LM8323_CMD_READ_INT, data, 1) == 1) { + if (data[0] & INT_NOINIT) + break; + + if (time_after(jiffies, tmo)) { + dev_err(&client->dev, + "timeout waiting for initialisation\n"); + break; + } + + msleep(1); + } + + lm8323_configure(lm); + + /* If a true probe check the device */ + if (lm8323_read_id(lm, data) != 0) { + dev_err(&client->dev, "device not found\n"); + err = -ENODEV; + goto fail1; + } + + for (i = 0; i < LM8323_NUM_PWMS; i++) { + err = init_pwm(lm, i + 1, &client->dev, pdata->pwm_names[i]); + if (err < 0) + goto fail2; + } + + lm->kp_enabled = true; + err = device_create_file(&client->dev, &dev_attr_disable_kp); + if (err < 0) + goto fail2; + + idev->name = pdata->name ? : "LM8323 keypad"; + snprintf(lm->phys, sizeof(lm->phys), + "%s/input-kp", dev_name(&client->dev)); + idev->phys = lm->phys; + + idev->evbit[0] = BIT(EV_KEY) | BIT(EV_MSC); + __set_bit(MSC_SCAN, idev->mscbit); + for (i = 0; i < LM8323_KEYMAP_SIZE; i++) { + __set_bit(pdata->keymap[i], idev->keybit); + lm->keymap[i] = pdata->keymap[i]; + } + __clear_bit(KEY_RESERVED, idev->keybit); + + if (pdata->repeat) + __set_bit(EV_REP, idev->evbit); + + err = input_register_device(idev); + if (err) { + dev_dbg(&client->dev, "error registering input device\n"); + goto fail3; + } + + err = request_irq(client->irq, lm8323_irq, + IRQF_TRIGGER_FALLING | IRQF_DISABLED, + "lm8323", lm); + if (err) { + dev_err(&client->dev, "could not get IRQ %d\n", client->irq); + goto fail4; + } + + device_init_wakeup(&client->dev, 1); + enable_irq_wake(client->irq); + + return 0; + +fail4: + input_unregister_device(idev); + idev = NULL; +fail3: + device_remove_file(&client->dev, &dev_attr_disable_kp); +fail2: + while (--i >= 0) + if (lm->pwm[i].enabled) + led_classdev_unregister(&lm->pwm[i].cdev); +fail1: + input_free_device(idev); + kfree(lm); + return err; +} + +static int __devexit lm8323_remove(struct i2c_client *client) +{ + struct lm8323_chip *lm = i2c_get_clientdata(client); + int i; + + disable_irq_wake(client->irq); + free_irq(client->irq, lm); + cancel_work_sync(&lm->work); + + input_unregister_device(lm->idev); + + device_remove_file(&lm->client->dev, &dev_attr_disable_kp); + + for (i = 0; i < 3; i++) + if (lm->pwm[i].enabled) + led_classdev_unregister(&lm->pwm[i].cdev); + + kfree(lm); + + return 0; +} + +#ifdef CONFIG_PM +/* + * We don't need to explicitly suspend the chip, as it already switches off + * when there's no activity. + */ +static int lm8323_suspend(struct i2c_client *client, pm_message_t mesg) +{ + struct lm8323_chip *lm = i2c_get_clientdata(client); + int i; + + set_irq_wake(client->irq, 0); + disable_irq(client->irq); + + mutex_lock(&lm->lock); + lm->pm_suspend = true; + mutex_unlock(&lm->lock); + + for (i = 0; i < 3; i++) + if (lm->pwm[i].enabled) + led_classdev_suspend(&lm->pwm[i].cdev); + + return 0; +} + +static int lm8323_resume(struct i2c_client *client) +{ + struct lm8323_chip *lm = i2c_get_clientdata(client); + int i; + + mutex_lock(&lm->lock); + lm->pm_suspend = false; + mutex_unlock(&lm->lock); + + for (i = 0; i < 3; i++) + if (lm->pwm[i].enabled) + led_classdev_resume(&lm->pwm[i].cdev); + + enable_irq(client->irq); + set_irq_wake(client->irq, 1); + + return 0; +} +#else +#define lm8323_suspend NULL +#define lm8323_resume NULL +#endif + +static const struct i2c_device_id lm8323_id[] = { + { "lm8323", 0 }, + { } +}; + +static struct i2c_driver lm8323_i2c_driver = { + .driver = { + .name = "lm8323", + }, + .probe = lm8323_probe, + .remove = __devexit_p(lm8323_remove), + .suspend = lm8323_suspend, + .resume = lm8323_resume, + .id_table = lm8323_id, +}; +MODULE_DEVICE_TABLE(i2c, lm8323_id); + +static int __init lm8323_init(void) +{ + return i2c_add_driver(&lm8323_i2c_driver); +} +module_init(lm8323_init); + +static void __exit lm8323_exit(void) +{ + i2c_del_driver(&lm8323_i2c_driver); +} +module_exit(lm8323_exit); + +MODULE_AUTHOR("Timo O. Karjalainen <timo.o.karjalainen@nokia.com>"); +MODULE_AUTHOR("Daniel Stone"); +MODULE_AUTHOR("Felipe Balbi <felipe.balbi@nokia.com>"); +MODULE_DESCRIPTION("LM8323 keypad driver"); +MODULE_LICENSE("GPL"); + diff --git a/drivers/input/keyboard/matrix_keypad.c b/drivers/input/keyboard/matrix_keypad.c new file mode 100644 index 00000000000..541b981ff07 --- /dev/null +++ b/drivers/input/keyboard/matrix_keypad.c @@ -0,0 +1,453 @@ +/* + * GPIO driven matrix keyboard driver + * + * Copyright (c) 2008 Marek Vasut <marek.vasut@gmail.com> + * + * Based on corgikbd.c + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + */ + +#include <linux/types.h> +#include <linux/delay.h> +#include <linux/platform_device.h> +#include <linux/init.h> +#include <linux/input.h> +#include <linux/irq.h> +#include <linux/interrupt.h> +#include <linux/jiffies.h> +#include <linux/module.h> +#include <linux/gpio.h> +#include <linux/input/matrix_keypad.h> + +struct matrix_keypad { + const struct matrix_keypad_platform_data *pdata; + struct input_dev *input_dev; + unsigned short *keycodes; + unsigned int row_shift; + + uint32_t last_key_state[MATRIX_MAX_COLS]; + struct delayed_work work; + bool scan_pending; + bool stopped; + spinlock_t lock; +}; + +/* + * NOTE: normally the GPIO has to be put into HiZ when de-activated to cause + * minmal side effect when scanning other columns, here it is configured to + * be input, and it should work on most platforms. + */ +static void __activate_col(const struct matrix_keypad_platform_data *pdata, + int col, bool on) +{ + bool level_on = !pdata->active_low; + + if (on) { + gpio_direction_output(pdata->col_gpios[col], level_on); + } else { + gpio_set_value_cansleep(pdata->col_gpios[col], !level_on); + gpio_direction_input(pdata->col_gpios[col]); + } +} + +static void activate_col(const struct matrix_keypad_platform_data *pdata, + int col, bool on) +{ + __activate_col(pdata, col, on); + + if (on && pdata->col_scan_delay_us) + udelay(pdata->col_scan_delay_us); +} + +static void activate_all_cols(const struct matrix_keypad_platform_data *pdata, + bool on) +{ + int col; + + for (col = 0; col < pdata->num_col_gpios; col++) + __activate_col(pdata, col, on); +} + +static bool row_asserted(const struct matrix_keypad_platform_data *pdata, + int row) +{ + return gpio_get_value_cansleep(pdata->row_gpios[row]) ? + !pdata->active_low : pdata->active_low; +} + +static void enable_row_irqs(struct matrix_keypad *keypad) +{ + const struct matrix_keypad_platform_data *pdata = keypad->pdata; + int i; + + for (i = 0; i < pdata->num_row_gpios; i++) + enable_irq(gpio_to_irq(pdata->row_gpios[i])); +} + +static void disable_row_irqs(struct matrix_keypad *keypad) +{ + const struct matrix_keypad_platform_data *pdata = keypad->pdata; + int i; + + for (i = 0; i < pdata->num_row_gpios; i++) + disable_irq_nosync(gpio_to_irq(pdata->row_gpios[i])); +} + +/* + * This gets the keys from keyboard and reports it to input subsystem + */ +static void matrix_keypad_scan(struct work_struct *work) +{ + struct matrix_keypad *keypad = + container_of(work, struct matrix_keypad, work.work); + struct input_dev *input_dev = keypad->input_dev; + const struct matrix_keypad_platform_data *pdata = keypad->pdata; + uint32_t new_state[MATRIX_MAX_COLS]; + int row, col, code; + + /* de-activate all columns for scanning */ + activate_all_cols(pdata, false); + + memset(new_state, 0, sizeof(new_state)); + + /* assert each column and read the row status out */ + for (col = 0; col < pdata->num_col_gpios; col++) { + + activate_col(pdata, col, true); + + for (row = 0; row < pdata->num_row_gpios; row++) + new_state[col] |= + row_asserted(pdata, row) ? (1 << row) : 0; + + activate_col(pdata, col, false); + } + + for (col = 0; col < pdata->num_col_gpios; col++) { + uint32_t bits_changed; + + bits_changed = keypad->last_key_state[col] ^ new_state[col]; + if (bits_changed == 0) + continue; + + for (row = 0; row < pdata->num_row_gpios; row++) { + if ((bits_changed & (1 << row)) == 0) + continue; + + code = MATRIX_SCAN_CODE(row, col, keypad->row_shift); + input_event(input_dev, EV_MSC, MSC_SCAN, code); + input_report_key(input_dev, + keypad->keycodes[code], + new_state[col] & (1 << row)); + } + } + input_sync(input_dev); + + memcpy(keypad->last_key_state, new_state, sizeof(new_state)); + + activate_all_cols(pdata, true); + + /* Enable IRQs again */ + spin_lock_irq(&keypad->lock); + keypad->scan_pending = false; + enable_row_irqs(keypad); + spin_unlock_irq(&keypad->lock); +} + +static irqreturn_t matrix_keypad_interrupt(int irq, void *id) +{ + struct matrix_keypad *keypad = id; + unsigned long flags; + + spin_lock_irqsave(&keypad->lock, flags); + + /* + * See if another IRQ beaten us to it and scheduled the + * scan already. In that case we should not try to + * disable IRQs again. + */ + if (unlikely(keypad->scan_pending || keypad->stopped)) + goto out; + + disable_row_irqs(keypad); + keypad->scan_pending = true; + schedule_delayed_work(&keypad->work, + msecs_to_jiffies(keypad->pdata->debounce_ms)); + +out: + spin_unlock_irqrestore(&keypad->lock, flags); + return IRQ_HANDLED; +} + +static int matrix_keypad_start(struct input_dev *dev) +{ + struct matrix_keypad *keypad = input_get_drvdata(dev); + + keypad->stopped = false; + mb(); + + /* + * Schedule an immediate key scan to capture current key state; + * columns will be activated and IRQs be enabled after the scan. + */ + schedule_delayed_work(&keypad->work, 0); + + return 0; +} + +static void matrix_keypad_stop(struct input_dev *dev) +{ + struct matrix_keypad *keypad = input_get_drvdata(dev); + + keypad->stopped = true; + mb(); + flush_work(&keypad->work.work); + /* + * matrix_keypad_scan() will leave IRQs enabled; + * we should disable them now. + */ + disable_row_irqs(keypad); +} + +#ifdef CONFIG_PM +static int matrix_keypad_suspend(struct platform_device *pdev, pm_message_t state) +{ + struct matrix_keypad *keypad = platform_get_drvdata(pdev); + const struct matrix_keypad_platform_data *pdata = keypad->pdata; + int i; + + matrix_keypad_stop(keypad->input_dev); + + if (device_may_wakeup(&pdev->dev)) + for (i = 0; i < pdata->num_row_gpios; i++) + enable_irq_wake(gpio_to_irq(pdata->row_gpios[i])); + + return 0; +} + +static int matrix_keypad_resume(struct platform_device *pdev) +{ + struct matrix_keypad *keypad = platform_get_drvdata(pdev); + const struct matrix_keypad_platform_data *pdata = keypad->pdata; + int i; + + if (device_may_wakeup(&pdev->dev)) + for (i = 0; i < pdata->num_row_gpios; i++) + disable_irq_wake(gpio_to_irq(pdata->row_gpios[i])); + + matrix_keypad_start(keypad->input_dev); + + return 0; +} +#else +#define matrix_keypad_suspend NULL +#define matrix_keypad_resume NULL +#endif + +static int __devinit init_matrix_gpio(struct platform_device *pdev, + struct matrix_keypad *keypad) +{ + const struct matrix_keypad_platform_data *pdata = keypad->pdata; + int i, err = -EINVAL; + + /* initialized strobe lines as outputs, activated */ + for (i = 0; i < pdata->num_col_gpios; i++) { + err = gpio_request(pdata->col_gpios[i], "matrix_kbd_col"); + if (err) { + dev_err(&pdev->dev, + "failed to request GPIO%d for COL%d\n", + pdata->col_gpios[i], i); + goto err_free_cols; + } + + gpio_direction_output(pdata->col_gpios[i], !pdata->active_low); + } + + for (i = 0; i < pdata->num_row_gpios; i++) { + err = gpio_request(pdata->row_gpios[i], "matrix_kbd_row"); + if (err) { + dev_err(&pdev->dev, + "failed to request GPIO%d for ROW%d\n", + pdata->row_gpios[i], i); + goto err_free_rows; + } + + gpio_direction_input(pdata->row_gpios[i]); + } + + for (i = 0; i < pdata->num_row_gpios; i++) { + err = request_irq(gpio_to_irq(pdata->row_gpios[i]), + matrix_keypad_interrupt, + IRQF_DISABLED | + IRQF_TRIGGER_RISING | IRQF_TRIGGER_FALLING, + "matrix-keypad", keypad); + if (err) { + dev_err(&pdev->dev, + "Unable to acquire interrupt for GPIO line %i\n", + pdata->row_gpios[i]); + goto err_free_irqs; + } + } + + /* initialized as disabled - enabled by input->open */ + disable_row_irqs(keypad); + return 0; + +err_free_irqs: + while (--i >= 0) + free_irq(gpio_to_irq(pdata->row_gpios[i]), keypad); + i = pdata->num_row_gpios; +err_free_rows: + while (--i >= 0) + gpio_free(pdata->row_gpios[i]); + i = pdata->num_col_gpios; +err_free_cols: + while (--i >= 0) + gpio_free(pdata->col_gpios[i]); + + return err; +} + +static int __devinit matrix_keypad_probe(struct platform_device *pdev) +{ + const struct matrix_keypad_platform_data *pdata; + const struct matrix_keymap_data *keymap_data; + struct matrix_keypad *keypad; + struct input_dev *input_dev; + unsigned short *keycodes; + unsigned int row_shift; + int i; + int err; + + pdata = pdev->dev.platform_data; + if (!pdata) { + dev_err(&pdev->dev, "no platform data defined\n"); + return -EINVAL; + } + + keymap_data = pdata->keymap_data; + if (!keymap_data) { + dev_err(&pdev->dev, "no keymap data defined\n"); + return -EINVAL; + } + + row_shift = get_count_order(pdata->num_col_gpios); + + keypad = kzalloc(sizeof(struct matrix_keypad), GFP_KERNEL); + keycodes = kzalloc((pdata->num_row_gpios << row_shift) * + sizeof(*keycodes), + GFP_KERNEL); + input_dev = input_allocate_device(); + if (!keypad || !keycodes || !input_dev) { + err = -ENOMEM; + goto err_free_mem; + } + + keypad->input_dev = input_dev; + keypad->pdata = pdata; + keypad->keycodes = keycodes; + keypad->row_shift = row_shift; + keypad->stopped = true; + INIT_DELAYED_WORK(&keypad->work, matrix_keypad_scan); + spin_lock_init(&keypad->lock); + + input_dev->name = pdev->name; + input_dev->id.bustype = BUS_HOST; + input_dev->dev.parent = &pdev->dev; + input_dev->evbit[0] = BIT_MASK(EV_KEY) | BIT_MASK(EV_REP); + input_dev->open = matrix_keypad_start; + input_dev->close = matrix_keypad_stop; + + input_dev->keycode = keycodes; + input_dev->keycodesize = sizeof(*keycodes); + input_dev->keycodemax = pdata->num_row_gpios << keypad->row_shift; + + for (i = 0; i < keymap_data->keymap_size; i++) { + unsigned int key = keymap_data->keymap[i]; + unsigned int row = KEY_ROW(key); + unsigned int col = KEY_COL(key); + unsigned short code = KEY_VAL(key); + + keycodes[MATRIX_SCAN_CODE(row, col, row_shift)] = code; + __set_bit(code, input_dev->keybit); + } + __clear_bit(KEY_RESERVED, input_dev->keybit); + + input_set_capability(input_dev, EV_MSC, MSC_SCAN); + input_set_drvdata(input_dev, keypad); + + err = init_matrix_gpio(pdev, keypad); + if (err) + goto err_free_mem; + + err = input_register_device(keypad->input_dev); + if (err) + goto err_free_mem; + + device_init_wakeup(&pdev->dev, pdata->wakeup); + platform_set_drvdata(pdev, keypad); + + return 0; + +err_free_mem: + input_free_device(input_dev); + kfree(keycodes); + kfree(keypad); + return err; +} + +static int __devexit matrix_keypad_remove(struct platform_device *pdev) +{ + struct matrix_keypad *keypad = platform_get_drvdata(pdev); + const struct matrix_keypad_platform_data *pdata = keypad->pdata; + int i; + + device_init_wakeup(&pdev->dev, 0); + + for (i = 0; i < pdata->num_row_gpios; i++) { + free_irq(gpio_to_irq(pdata->row_gpios[i]), keypad); + gpio_free(pdata->row_gpios[i]); + } + + for (i = 0; i < pdata->num_col_gpios; i++) + gpio_free(pdata->col_gpios[i]); + + input_unregister_device(keypad->input_dev); + platform_set_drvdata(pdev, NULL); + kfree(keypad->keycodes); + kfree(keypad); + + return 0; +} + +static struct platform_driver matrix_keypad_driver = { + .probe = matrix_keypad_probe, + .remove = __devexit_p(matrix_keypad_remove), + .suspend = matrix_keypad_suspend, + .resume = matrix_keypad_resume, + .driver = { + .name = "matrix-keypad", + .owner = THIS_MODULE, + }, +}; + +static int __init matrix_keypad_init(void) +{ + return platform_driver_register(&matrix_keypad_driver); +} + +static void __exit matrix_keypad_exit(void) +{ + platform_driver_unregister(&matrix_keypad_driver); +} + +module_init(matrix_keypad_init); +module_exit(matrix_keypad_exit); + +MODULE_AUTHOR("Marek Vasut <marek.vasut@gmail.com>"); +MODULE_DESCRIPTION("GPIO Driven Matrix Keypad Driver"); +MODULE_LICENSE("GPL v2"); +MODULE_ALIAS("platform:matrix-keypad"); |