summaryrefslogtreecommitdiffstats
path: root/drivers/ide/pci/cs5535.c
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/ide/pci/cs5535.c')
-rw-r--r--drivers/ide/pci/cs5535.c305
1 files changed, 305 insertions, 0 deletions
diff --git a/drivers/ide/pci/cs5535.c b/drivers/ide/pci/cs5535.c
new file mode 100644
index 00000000000..6eb305197f3
--- /dev/null
+++ b/drivers/ide/pci/cs5535.c
@@ -0,0 +1,305 @@
+/*
+ * linux/drivers/ide/pci/cs5535.c
+ *
+ * Copyright (C) 2004-2005 Advanced Micro Devices, Inc.
+ *
+ * History:
+ * 09/20/2005 - Jaya Kumar <jayakumar.ide@gmail.com>
+ * - Reworked tuneproc, set_drive, misc mods to prep for mainline
+ * - Work was sponsored by CIS (M) Sdn Bhd.
+ * Ported to Kernel 2.6.11 on June 26, 2005 by
+ * Wolfgang Zuleger <wolfgang.zuleger@gmx.de>
+ * Alexander Kiausch <alex.kiausch@t-online.de>
+ * Originally developed by AMD for 2.4/2.6
+ *
+ * Development of this chipset driver was funded
+ * by the nice folks at National Semiconductor/AMD.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published by
+ * the Free Software Foundation.
+ *
+ * Documentation:
+ * CS5535 documentation available from AMD
+ */
+
+#include <linux/config.h>
+#include <linux/module.h>
+#include <linux/pci.h>
+#include <linux/ide.h>
+
+#include "ide-timing.h"
+
+#define MSR_ATAC_BASE 0x51300000
+#define ATAC_GLD_MSR_CAP (MSR_ATAC_BASE+0)
+#define ATAC_GLD_MSR_CONFIG (MSR_ATAC_BASE+0x01)
+#define ATAC_GLD_MSR_SMI (MSR_ATAC_BASE+0x02)
+#define ATAC_GLD_MSR_ERROR (MSR_ATAC_BASE+0x03)
+#define ATAC_GLD_MSR_PM (MSR_ATAC_BASE+0x04)
+#define ATAC_GLD_MSR_DIAG (MSR_ATAC_BASE+0x05)
+#define ATAC_IO_BAR (MSR_ATAC_BASE+0x08)
+#define ATAC_RESET (MSR_ATAC_BASE+0x10)
+#define ATAC_CH0D0_PIO (MSR_ATAC_BASE+0x20)
+#define ATAC_CH0D0_DMA (MSR_ATAC_BASE+0x21)
+#define ATAC_CH0D1_PIO (MSR_ATAC_BASE+0x22)
+#define ATAC_CH0D1_DMA (MSR_ATAC_BASE+0x23)
+#define ATAC_PCI_ABRTERR (MSR_ATAC_BASE+0x24)
+#define ATAC_BM0_CMD_PRIM 0x00
+#define ATAC_BM0_STS_PRIM 0x02
+#define ATAC_BM0_PRD 0x04
+#define CS5535_CABLE_DETECT 0x48
+
+/* Format I PIO settings. We seperate out cmd and data for safer timings */
+
+static unsigned int cs5535_pio_cmd_timings[5] =
+{ 0xF7F4, 0x53F3, 0x13F1, 0x5131, 0x1131 };
+static unsigned int cs5535_pio_dta_timings[5] =
+{ 0xF7F4, 0xF173, 0x8141, 0x5131, 0x1131 };
+
+static unsigned int cs5535_mwdma_timings[3] =
+{ 0x7F0FFFF3, 0x7F035352, 0x7f024241 };
+
+static unsigned int cs5535_udma_timings[5] =
+{ 0x7F7436A1, 0x7F733481, 0x7F723261, 0x7F713161, 0x7F703061 };
+
+/* Macros to check if the register is the reset value - reset value is an
+ invalid timing and indicates the register has not been set previously */
+
+#define CS5535_BAD_PIO(timings) ( (timings&~0x80000000UL) == 0x00009172 )
+#define CS5535_BAD_DMA(timings) ( (timings & 0x000FFFFF) == 0x00077771 )
+
+/****
+ * cs5535_set_speed - Configure the chipset to the new speed
+ * @drive: Drive to set up
+ * @speed: desired speed
+ *
+ * cs5535_set_speed() configures the chipset to a new speed.
+ */
+static void cs5535_set_speed(ide_drive_t *drive, u8 speed)
+{
+
+ u32 reg = 0, dummy;
+ int unit = drive->select.b.unit;
+
+
+ /* Set the PIO timings */
+ if ((speed & XFER_MODE) == XFER_PIO) {
+ u8 pioa;
+ u8 piob;
+ u8 cmd;
+
+ pioa = speed - XFER_PIO_0;
+ piob = ide_get_best_pio_mode(&(drive->hwif->drives[!unit]),
+ 255, 4, NULL);
+ cmd = pioa < piob ? pioa : piob;
+
+ /* Write the speed of the current drive */
+ reg = (cs5535_pio_cmd_timings[cmd] << 16) |
+ cs5535_pio_dta_timings[pioa];
+ wrmsr(unit ? ATAC_CH0D1_PIO : ATAC_CH0D0_PIO, reg, 0);
+
+ /* And if nessesary - change the speed of the other drive */
+ rdmsr(unit ? ATAC_CH0D0_PIO : ATAC_CH0D1_PIO, reg, dummy);
+
+ if (((reg >> 16) & cs5535_pio_cmd_timings[cmd]) !=
+ cs5535_pio_cmd_timings[cmd]) {
+ reg &= 0x0000FFFF;
+ reg |= cs5535_pio_cmd_timings[cmd] << 16;
+ wrmsr(unit ? ATAC_CH0D0_PIO : ATAC_CH0D1_PIO, reg, 0);
+ }
+
+ /* Set bit 31 of the DMA register for PIO format 1 timings */
+ rdmsr(unit ? ATAC_CH0D1_DMA : ATAC_CH0D0_DMA, reg, dummy);
+ wrmsr(unit ? ATAC_CH0D1_DMA : ATAC_CH0D0_DMA,
+ reg | 0x80000000UL, 0);
+ } else {
+ rdmsr(unit ? ATAC_CH0D1_DMA : ATAC_CH0D0_DMA, reg, dummy);
+
+ reg &= 0x80000000UL; /* Preserve the PIO format bit */
+
+ if (speed >= XFER_UDMA_0 && speed <= XFER_UDMA_7)
+ reg |= cs5535_udma_timings[speed - XFER_UDMA_0];
+ else if (speed >= XFER_MW_DMA_0 && speed <= XFER_MW_DMA_2)
+ reg |= cs5535_mwdma_timings[speed - XFER_MW_DMA_0];
+ else
+ return;
+
+ wrmsr(unit ? ATAC_CH0D1_DMA : ATAC_CH0D0_DMA, reg, 0);
+ }
+}
+
+static u8 cs5535_ratemask(ide_drive_t *drive)
+{
+ /* eighty93 will return 1 if it's 80core and capable of
+ exceeding udma2, 0 otherwise. we need ratemask to set
+ the max speed and if we can > udma2 then we return 2
+ which selects speed_max as udma4 which is the 5535's max
+ speed, and 1 selects udma2 which is the max for 40c */
+ if (!eighty_ninty_three(drive))
+ return 1;
+
+ return 2;
+}
+
+
+/****
+ * cs5535_set_drive - Configure the drive to the new speed
+ * @drive: Drive to set up
+ * @speed: desired speed
+ *
+ * cs5535_set_drive() configures the drive and the chipset to a
+ * new speed. It also can be called by upper layers.
+ */
+static int cs5535_set_drive(ide_drive_t *drive, u8 speed)
+{
+ speed = ide_rate_filter(cs5535_ratemask(drive), speed);
+ ide_config_drive_speed(drive, speed);
+ cs5535_set_speed(drive, speed);
+
+ return 0;
+}
+
+/****
+ * cs5535_tuneproc - PIO setup
+ * @drive: drive to set up
+ * @pio: mode to use (255 for 'best possible')
+ *
+ * A callback from the upper layers for PIO-only tuning.
+ */
+static void cs5535_tuneproc(ide_drive_t *drive, u8 xferspeed)
+{
+ u8 modes[] = { XFER_PIO_0, XFER_PIO_1, XFER_PIO_2, XFER_PIO_3,
+ XFER_PIO_4 };
+
+ /* cs5535 max pio is pio 4, best_pio will check the blacklist.
+ i think we don't need to rate_filter the incoming xferspeed
+ since we know we're only going to choose pio */
+ xferspeed = ide_get_best_pio_mode(drive, xferspeed, 4, NULL);
+ ide_config_drive_speed(drive, modes[xferspeed]);
+ cs5535_set_speed(drive, xferspeed);
+}
+
+static int cs5535_config_drive_for_dma(ide_drive_t *drive)
+{
+ u8 speed;
+
+ speed = ide_dma_speed(drive, cs5535_ratemask(drive));
+
+ /* If no DMA speed was available then let dma_check hit pio */
+ if (!speed) {
+ return 0;
+ }
+
+ cs5535_set_drive(drive, speed);
+ return ide_dma_enable(drive);
+}
+
+static int cs5535_dma_check(ide_drive_t *drive)
+{
+ ide_hwif_t *hwif = drive->hwif;
+ struct hd_driveid *id = drive->id;
+ u8 speed;
+
+ drive->init_speed = 0;
+
+ if ((id->capability & 1) && drive->autodma) {
+ if (ide_use_dma(drive)) {
+ if (cs5535_config_drive_for_dma(drive))
+ return hwif->ide_dma_on(drive);
+ }
+
+ goto fast_ata_pio;
+
+ } else if ((id->capability & 8) || (id->field_valid & 2)) {
+fast_ata_pio:
+ speed = ide_get_best_pio_mode(drive, 255, 4, NULL);
+ cs5535_set_drive(drive, speed);
+ return hwif->ide_dma_off_quietly(drive);
+ }
+ /* IORDY not supported */
+ return 0;
+}
+
+static u8 __devinit cs5535_cable_detect(struct pci_dev *dev)
+{
+ u8 bit;
+
+ /* if a 80 wire cable was detected */
+ pci_read_config_byte(dev, CS5535_CABLE_DETECT, &bit);
+ return (bit & 1);
+}
+
+/****
+ * init_hwif_cs5535 - Initialize one ide cannel
+ * @hwif: Channel descriptor
+ *
+ * This gets invoked by the IDE driver once for each channel. It
+ * performs channel-specific pre-initialization before drive probing.
+ *
+ */
+static void __devinit init_hwif_cs5535(ide_hwif_t *hwif)
+{
+ int i;
+
+ hwif->autodma = 0;
+
+ hwif->tuneproc = &cs5535_tuneproc;
+ hwif->speedproc = &cs5535_set_drive;
+ hwif->ide_dma_check = &cs5535_dma_check;
+
+ hwif->atapi_dma = 1;
+ hwif->ultra_mask = 0x1F;
+ hwif->mwdma_mask = 0x07;
+
+
+ hwif->udma_four = cs5535_cable_detect(hwif->pci_dev);
+
+ if (!noautodma)
+ hwif->autodma = 1;
+
+ /* just setting autotune and not worrying about bios timings */
+ for (i = 0; i < 2; i++) {
+ hwif->drives[i].autotune = 1;
+ hwif->drives[i].autodma = hwif->autodma;
+ }
+}
+
+static ide_pci_device_t cs5535_chipset __devinitdata = {
+ .name = "CS5535",
+ .init_hwif = init_hwif_cs5535,
+ .channels = 1,
+ .autodma = AUTODMA,
+ .bootable = ON_BOARD,
+};
+
+static int __devinit cs5535_init_one(struct pci_dev *dev,
+ const struct pci_device_id *id)
+{
+ return ide_setup_pci_device(dev, &cs5535_chipset);
+}
+
+static struct pci_device_id cs5535_pci_tbl[] =
+{
+ { PCI_VENDOR_ID_NS, PCI_DEVICE_ID_NS_CS5535_IDE, PCI_ANY_ID,
+ PCI_ANY_ID, 0, 0, 0},
+ { 0, },
+};
+
+MODULE_DEVICE_TABLE(pci, cs5535_pci_tbl);
+
+static struct pci_driver driver = {
+ .name = "CS5535_IDE",
+ .id_table = cs5535_pci_tbl,
+ .probe = cs5535_init_one,
+};
+
+static int __init cs5535_ide_init(void)
+{
+ return ide_pci_register_driver(&driver);
+}
+
+module_init(cs5535_ide_init);
+
+MODULE_AUTHOR("AMD");
+MODULE_DESCRIPTION("PCI driver module for AMD/NS CS5535 IDE");
+MODULE_LICENSE("GPL");