summaryrefslogtreecommitdiffstats
path: root/drivers/ata/pata_ali.c
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/ata/pata_ali.c')
-rw-r--r--drivers/ata/pata_ali.c80
1 files changed, 18 insertions, 62 deletions
diff --git a/drivers/ata/pata_ali.c b/drivers/ata/pata_ali.c
index ab44d18850f..d40edebb510 100644
--- a/drivers/ata/pata_ali.c
+++ b/drivers/ata/pata_ali.c
@@ -34,7 +34,7 @@
#include <linux/dmi.h>
#define DRV_NAME "pata_ali"
-#define DRV_VERSION "0.7.2"
+#define DRV_VERSION "0.7.4"
/*
* Cable special cases
@@ -90,59 +90,6 @@ static int ali_c2_cable_detect(struct ata_port *ap)
}
/**
- * ali_early_error_handler - reset for eary chip
- * @ap: ATA port
- *
- * Handle the reset callback for the later chips with cable detect
- */
-
-static int ali_c2_pre_reset(struct ata_port *ap)
-{
- ap->cbl = ali_c2_cable_detect(ap);
- return ata_std_prereset(ap);
-}
-
-static void ali_c2_error_handler(struct ata_port *ap)
-{
- ata_bmdma_drive_eh(ap, ali_c2_pre_reset,
- ata_std_softreset, NULL,
- ata_std_postreset);
-}
-
-/**
- * ali_early_cable_detect - cable detection
- * @ap: ATA port
- *
- * Perform cable detection for older chipsets. This turns out to be
- * rather easy to implement
- */
-
-static int ali_early_cable_detect(struct ata_port *ap)
-{
- return ATA_CBL_PATA40;
-}
-
-/**
- * ali_early_probe_init - reset for early chip
- * @ap: ATA port
- *
- * Handle the reset callback for the early (pre cable detect) chips.
- */
-
-static int ali_early_pre_reset(struct ata_port *ap)
-{
- ap->cbl = ali_early_cable_detect(ap);
- return ata_std_prereset(ap);
-}
-
-static void ali_early_error_handler(struct ata_port *ap)
-{
- return ata_bmdma_drive_eh(ap, ali_early_pre_reset,
- ata_std_softreset, NULL,
- ata_std_postreset);
-}
-
-/**
* ali_20_filter - filter for earlier ALI DMA
* @ap: ALi ATA port
* @adev: attached device
@@ -151,7 +98,7 @@ static void ali_early_error_handler(struct ata_port *ap)
* fix that later on. Also ensure we do not do UDMA on WDC drives
*/
-static unsigned long ali_20_filter(const struct ata_port *ap, struct ata_device *adev, unsigned long mask)
+static unsigned long ali_20_filter(struct ata_device *adev, unsigned long mask)
{
char model_num[ATA_ID_PROD_LEN + 1];
/* No DMA on anything but a disk for now */
@@ -160,7 +107,7 @@ static unsigned long ali_20_filter(const struct ata_port *ap, struct ata_device
ata_id_c_string(adev->id, model_num, ATA_ID_PROD, sizeof(model_num));
if (strstr(model_num, "WDC"))
return mask &= ~ATA_MASK_UDMA;
- return ata_pci_default_filter(ap, adev, mask);
+ return ata_pci_default_filter(adev, mask);
}
/**
@@ -314,7 +261,6 @@ static void ali_set_dmamode(struct ata_port *ap, struct ata_device *adev)
/**
* ali_lock_sectors - Keep older devices to 255 sector mode
- * @ap: ATA port
* @adev: Device
*
* Called during the bus probe for each device that is found. We use
@@ -324,7 +270,7 @@ static void ali_set_dmamode(struct ata_port *ap, struct ata_device *adev)
* slower PIO methods
*/
-static void ali_lock_sectors(struct ata_port *ap, struct ata_device *adev)
+static void ali_lock_sectors(struct ata_device *adev)
{
adev->max_sectors = 255;
}
@@ -345,8 +291,10 @@ static struct scsi_host_template ali_sht = {
.slave_configure = ata_scsi_slave_config,
.slave_destroy = ata_scsi_slave_destroy,
.bios_param = ata_std_bios_param,
+#ifdef CONFIG_PM
.resume = ata_scsi_device_resume,
.suspend = ata_scsi_device_suspend,
+#endif
};
/*
@@ -364,8 +312,9 @@ static struct ata_port_operations ali_early_port_ops = {
.freeze = ata_bmdma_freeze,
.thaw = ata_bmdma_thaw,
- .error_handler = ali_early_error_handler,
+ .error_handler = ata_bmdma_error_handler,
.post_internal_cmd = ata_bmdma_post_internal_cmd,
+ .cable_detect = ata_cable_40wire,
.qc_prep = ata_qc_prep,
.qc_issue = ata_qc_issue_prot,
@@ -400,8 +349,9 @@ static struct ata_port_operations ali_20_port_ops = {
.freeze = ata_bmdma_freeze,
.thaw = ata_bmdma_thaw,
- .error_handler = ali_early_error_handler,
+ .error_handler = ata_bmdma_error_handler,
.post_internal_cmd = ata_bmdma_post_internal_cmd,
+ .cable_detect = ata_cable_40wire,
.bmdma_setup = ata_bmdma_setup,
.bmdma_start = ata_bmdma_start,
@@ -438,8 +388,9 @@ static struct ata_port_operations ali_c2_port_ops = {
.freeze = ata_bmdma_freeze,
.thaw = ata_bmdma_thaw,
- .error_handler = ali_c2_error_handler,
+ .error_handler = ata_bmdma_error_handler,
.post_internal_cmd = ata_bmdma_post_internal_cmd,
+ .cable_detect = ali_c2_cable_detect,
.bmdma_setup = ata_bmdma_setup,
.bmdma_start = ata_bmdma_start,
@@ -475,8 +426,9 @@ static struct ata_port_operations ali_c5_port_ops = {
.freeze = ata_bmdma_freeze,
.thaw = ata_bmdma_thaw,
- .error_handler = ali_c2_error_handler,
+ .error_handler = ata_bmdma_error_handler,
.post_internal_cmd = ata_bmdma_post_internal_cmd,
+ .cable_detect = ali_c2_cable_detect,
.bmdma_setup = ata_bmdma_setup,
.bmdma_start = ata_bmdma_start,
@@ -667,11 +619,13 @@ static int ali_init_one(struct pci_dev *pdev, const struct pci_device_id *id)
return ata_pci_init_one(pdev, port_info, 2);
}
+#ifdef CONFIG_PM
static int ali_reinit_one(struct pci_dev *pdev)
{
ali_init_chipset(pdev);
return ata_pci_device_resume(pdev);
}
+#endif
static const struct pci_device_id ali[] = {
{ PCI_VDEVICE(AL, PCI_DEVICE_ID_AL_M5228), },
@@ -685,8 +639,10 @@ static struct pci_driver ali_pci_driver = {
.id_table = ali,
.probe = ali_init_one,
.remove = ata_pci_remove_one,
+#ifdef CONFIG_PM
.suspend = ata_pci_device_suspend,
.resume = ali_reinit_one,
+#endif
};
static int __init ali_init(void)