1 files changed, 257 insertions, 184 deletions

diff --git a/arch/x86/kernel/apic_32.c b/arch/x86/kernel/apic_32.c
index f88bd0d982b..21c831d96af 100644
--- a/arch/x86/kernel/apic_32.c
+++ b/arch/x86/kernel/apic_32.c
@@ -60,10 +60,8 @@ unsigned long mp_lapic_addr;
 static int force_enable_local_apic;
 int disable_apic;
 
-/* Local APIC timer verification ok */
-static int local_apic_timer_verify_ok;
 /* Disable local APIC timer from the kernel commandline or via dmi quirk */
-static int local_apic_timer_disabled;
+static int disable_apic_timer __cpuinitdata;
 /* Local APIC timer works in C2 */
 int local_apic_timer_c2_ok;
 EXPORT_SYMBOL_GPL(local_apic_timer_c2_ok);
@@ -130,7 +128,11 @@ static inline int lapic_get_version(void)
  */
 static inline int lapic_is_integrated(void)
 {
+#ifdef CONFIG_X86_64
+	return 1;
+#else
 	return APIC_INTEGRATED(lapic_get_version());
+#endif
 }
 
 /*
@@ -145,13 +147,18 @@ static int modern_apic(void)
 	return lapic_get_version() >= 0x14;
 }
 
-void apic_wait_icr_idle(void)
+/*
+ * Paravirt kernels also might be using these below ops. So we still
+ * use generic apic_read()/apic_write(), which might be pointing to different
+ * ops in PARAVIRT case.
+ */
+void xapic_wait_icr_idle(void)
 {
 	while (apic_read(APIC_ICR) & APIC_ICR_BUSY)
 		cpu_relax();
 }
 
-u32 safe_apic_wait_icr_idle(void)
+u32 safe_xapic_wait_icr_idle(void)
 {
 	u32 send_status;
 	int timeout;
@@ -167,16 +174,48 @@ u32 safe_apic_wait_icr_idle(void)
 	return send_status;
 }
 
+void xapic_icr_write(u32 low, u32 id)
+{
+	apic_write(APIC_ICR2, SET_APIC_DEST_FIELD(id));
+	apic_write(APIC_ICR, low);
+}
+
+u64 xapic_icr_read(void)
+{
+	u32 icr1, icr2;
+
+	icr2 = apic_read(APIC_ICR2);
+	icr1 = apic_read(APIC_ICR);
+
+	return icr1 | ((u64)icr2 << 32);
+}
+
+static struct apic_ops xapic_ops = {
+	.read = native_apic_mem_read,
+	.write = native_apic_mem_write,
+	.icr_read = xapic_icr_read,
+	.icr_write = xapic_icr_write,
+	.wait_icr_idle = xapic_wait_icr_idle,
+	.safe_wait_icr_idle = safe_xapic_wait_icr_idle,
+};
+
+struct apic_ops __read_mostly *apic_ops = &xapic_ops;
+EXPORT_SYMBOL_GPL(apic_ops);
+
 /**
  * enable_NMI_through_LVT0 - enable NMI through local vector table 0
  */
 void __cpuinit enable_NMI_through_LVT0(void)
 {
-	unsigned int v = APIC_DM_NMI;
+	unsigned int v;
 
-	/* Level triggered for 82489DX */
+	/* unmask and set to NMI */
+	v = APIC_DM_NMI;
+
+	/* Level triggered for 82489DX (32bit mode) */
 	if (!lapic_is_integrated())
 		v |= APIC_LVT_LEVEL_TRIGGER;
+
 	apic_write(APIC_LVT0, v);
 }
 
@@ -193,9 +232,13 @@ int get_physical_broadcast(void)
  */
 int lapic_get_maxlvt(void)
 {
-	unsigned int v = apic_read(APIC_LVR);
+	unsigned int v;
 
-	/* 82489DXs do not report # of LVT entries. */
+	v = apic_read(APIC_LVR);
+	/*
+	 * - we always have APIC integrated on 64bit mode
+	 * - 82489DXs do not report # of LVT entries
+	 */
 	return APIC_INTEGRATED(GET_APIC_VERSION(v)) ? GET_APIC_MAXLVT(v) : 2;
 }
 
@@ -203,8 +246,12 @@ int lapic_get_maxlvt(void)
  * Local APIC timer
  */
 
-/* Clock divisor is set to 16 */
+/* Clock divisor */
+#ifdef CONFG_X86_64
+#define APIC_DIVISOR 1
+#else
 #define APIC_DIVISOR 16
+#endif
 
 /*
  * This function sets up the local APIC timer, with a timeout of
@@ -212,6 +259,9 @@ int lapic_get_maxlvt(void)
  * this function twice on the boot CPU, once with a bogus timeout
  * value, second time for real. The other (noncalibrating) CPUs
  * call this function only once, with the real, calibrated value.
+ *
+ * We do reads before writes even if unnecessary, to get around the
+ * P5 APIC double write bug.
  */
 static void __setup_APIC_LVTT(unsigned int clocks, int oneshot, int irqen)
 {
@@ -233,14 +283,48 @@ static void __setup_APIC_LVTT(unsigned int clocks, int oneshot, int irqen)
 	 */
 	tmp_value = apic_read(APIC_TDCR);
 	apic_write(APIC_TDCR,
-		   (tmp_value & ~(APIC_TDR_DIV_1 | APIC_TDR_DIV_TMBASE)) |
-		   APIC_TDR_DIV_16);
+		(tmp_value & ~(APIC_TDR_DIV_1 | APIC_TDR_DIV_TMBASE)) |
+		APIC_TDR_DIV_16);
 
 	if (!oneshot)
 		apic_write(APIC_TMICT, clocks / APIC_DIVISOR);
 }
 
 /*
+ * Setup extended LVT, AMD specific (K8, family 10h)
+ *
+ * Vector mappings are hard coded. On K8 only offset 0 (APIC500) and
+ * MCE interrupts are supported. Thus MCE offset must be set to 0.
+ *
+ * If mask=1, the LVT entry does not generate interrupts while mask=0
+ * enables the vector. See also the BKDGs.
+ */
+
+#define APIC_EILVT_LVTOFF_MCE 0
+#define APIC_EILVT_LVTOFF_IBS 1
+
+static void setup_APIC_eilvt(u8 lvt_off, u8 vector, u8 msg_type, u8 mask)
+{
+	unsigned long reg = (lvt_off << 4) + APIC_EILVT0;
+	unsigned int  v   = (mask << 16) | (msg_type << 8) | vector;
+
+	apic_write(reg, v);
+}
+
+u8 setup_APIC_eilvt_mce(u8 vector, u8 msg_type, u8 mask)
+{
+	setup_APIC_eilvt(APIC_EILVT_LVTOFF_MCE, vector, msg_type, mask);
+	return APIC_EILVT_LVTOFF_MCE;
+}
+
+u8 setup_APIC_eilvt_ibs(u8 vector, u8 msg_type, u8 mask)
+{
+	setup_APIC_eilvt(APIC_EILVT_LVTOFF_IBS, vector, msg_type, mask);
+	return APIC_EILVT_LVTOFF_IBS;
+}
+EXPORT_SYMBOL_GPL(setup_APIC_eilvt_ibs);
+
+/*
  * Program the next event, relative to now
  */
 static int lapic_next_event(unsigned long delta,
@@ -259,8 +343,8 @@ static void lapic_timer_setup(enum clock_event_mode mode,
 	unsigned long flags;
 	unsigned int v;
 
-	/* Lapic used for broadcast ? */
-	if (!local_apic_timer_verify_ok)
+	/* Lapic used as dummy for broadcast ? */
+	if (evt->features & CLOCK_EVT_FEAT_DUMMY)
 		return;
 
 	local_irq_save(flags);
@@ -473,7 +557,7 @@ static int __init calibrate_APIC_clock(void)
 		return -1;
 	}
 
-	local_apic_timer_verify_ok = 1;
+	levt->features &= ~CLOCK_EVT_FEAT_DUMMY;
 
 	/* We trust the pm timer based calibration */
 	if (!pm_referenced) {
@@ -507,11 +591,11 @@ static int __init calibrate_APIC_clock(void)
 		if (deltaj >= LAPIC_CAL_LOOPS-2 && deltaj <= LAPIC_CAL_LOOPS+2)
 			apic_printk(APIC_VERBOSE, "... jiffies result ok\n");
 		else
-			local_apic_timer_verify_ok = 0;
+			levt->features |= CLOCK_EVT_FEAT_DUMMY;
 	} else
 		local_irq_enable();
 
-	if (!local_apic_timer_verify_ok) {
+	if (levt->features & CLOCK_EVT_FEAT_DUMMY) {
 		printk(KERN_WARNING
 		       "APIC timer disabled due to verification failure.\n");
 			return -1;
@@ -533,7 +617,8 @@ void __init setup_boot_APIC_clock(void)
 	 * timer as a dummy clock event source on SMP systems, so the
 	 * broadcast mechanism is used. On UP systems simply ignore it.
 	 */
-	if (local_apic_timer_disabled) {
+	if (disable_apic_timer) {
+		printk(KERN_INFO "Disabling APIC timer\n");
 		/* No broadcast on UP ! */
 		if (num_possible_cpus() > 1) {
 			lapic_clockevent.mult = 1;
@@ -602,7 +687,11 @@ static void local_apic_timer_interrupt(void)
 	/*
 	 * the NMI deadlock-detector uses this.
 	 */
+#ifdef CONFIG_X86_64
+	add_pda(apic_timer_irqs, 1);
+#else
 	per_cpu(irq_stat, cpu).apic_timer_irqs++;
+#endif
 
 	evt->event_handler(evt);
 }
@@ -642,35 +731,6 @@ int setup_profiling_timer(unsigned int multiplier)
 }
 
 /*
- * Setup extended LVT, AMD specific (K8, family 10h)
- *
- * Vector mappings are hard coded. On K8 only offset 0 (APIC500) and
- * MCE interrupts are supported. Thus MCE offset must be set to 0.
- */
-
-#define APIC_EILVT_LVTOFF_MCE 0
-#define APIC_EILVT_LVTOFF_IBS 1
-
-static void setup_APIC_eilvt(u8 lvt_off, u8 vector, u8 msg_type, u8 mask)
-{
-	unsigned long reg = (lvt_off << 4) + APIC_EILVT0;
-	unsigned int  v   = (mask << 16) | (msg_type << 8) | vector;
-	apic_write(reg, v);
-}
-
-u8 setup_APIC_eilvt_mce(u8 vector, u8 msg_type, u8 mask)
-{
-	setup_APIC_eilvt(APIC_EILVT_LVTOFF_MCE, vector, msg_type, mask);
-	return APIC_EILVT_LVTOFF_MCE;
-}
-
-u8 setup_APIC_eilvt_ibs(u8 vector, u8 msg_type, u8 mask)
-{
-	setup_APIC_eilvt(APIC_EILVT_LVTOFF_IBS, vector, msg_type, mask);
-	return APIC_EILVT_LVTOFF_IBS;
-}
-
-/*
  * Local APIC start and shutdown
  */
 
@@ -715,7 +775,7 @@ void clear_local_APIC(void)
 	}
 
 	/* lets not touch this if we didn't frob it */
-#ifdef CONFIG_X86_MCE_P4THERMAL
+#if defined(CONFIG_X86_MCE_P4THERMAL) || defined(X86_MCE_INTEL)
 	if (maxlvt >= 5) {
 		v = apic_read(APIC_LVTTHMR);
 		apic_write(APIC_LVTTHMR, v | APIC_LVT_MASKED);
@@ -732,10 +792,6 @@ void clear_local_APIC(void)
 	if (maxlvt >= 4)
 		apic_write(APIC_LVTPC, APIC_LVT_MASKED);
 
-#ifdef CONFIG_X86_MCE_P4THERMAL
-	if (maxlvt >= 5)
-		apic_write(APIC_LVTTHMR, APIC_LVT_MASKED);
-#endif
 	/* Integrated APIC (!82489DX) ? */
 	if (lapic_is_integrated()) {
 		if (maxlvt > 3)
@@ -750,7 +806,7 @@ void clear_local_APIC(void)
  */
 void disable_local_APIC(void)
 {
-	unsigned long value;
+	unsigned int value;
 
 	clear_local_APIC();
 
@@ -762,6 +818,7 @@ void disable_local_APIC(void)
 	value &= ~APIC_SPIV_APIC_ENABLED;
 	apic_write(APIC_SPIV, value);
 
+#ifdef CONFIG_X86_32
 	/*
 	 * When LAPIC was disabled by the BIOS and enabled by the kernel,
 	 * restore the disabled state.
@@ -773,6 +830,7 @@ void disable_local_APIC(void)
 		l &= ~MSR_IA32_APICBASE_ENABLE;
 		wrmsr(MSR_IA32_APICBASE, l, h);
 	}
+#endif
 }
 
 /*
@@ -789,11 +847,15 @@ void lapic_shutdown(void)
 		return;
 
 	local_irq_save(flags);
-	clear_local_APIC();
 
-	if (enabled_via_apicbase)
+#ifdef CONFIG_X86_32
+	if (!enabled_via_apicbase)
+		clear_local_APIC();
+	else
+#endif
 		disable_local_APIC();
 
+
 	local_irq_restore(flags);
 }
 
@@ -838,6 +900,12 @@ int __init verify_local_APIC(void)
 	 */
 	reg0 = apic_read(APIC_ID);
 	apic_printk(APIC_DEBUG, "Getting ID: %x\n", reg0);
+	apic_write(APIC_ID, reg0 ^ APIC_ID_MASK);
+	reg1 = apic_read(APIC_ID);
+	apic_printk(APIC_DEBUG, "Getting ID: %x\n", reg1);
+	apic_write(APIC_ID, reg0);
+	if (reg1 != (reg0 ^ APIC_ID_MASK))
+		return 0;
 
 	/*
 	 * The next two are just to see if we have sane values.
@@ -863,14 +931,15 @@ void __init sync_Arb_IDs(void)
 	 */
 	if (modern_apic() || boot_cpu_data.x86_vendor == X86_VENDOR_AMD)
 		return;
+
 	/*
 	 * Wait for idle.
 	 */
 	apic_wait_icr_idle();
 
 	apic_printk(APIC_DEBUG, "Synchronizing Arb IDs.\n");
-	apic_write(APIC_ICR,
-		   APIC_DEST_ALLINC | APIC_INT_LEVELTRIG | APIC_DM_INIT);
+	apic_write(APIC_ICR, APIC_DEST_ALLINC |
+			APIC_INT_LEVELTRIG | APIC_DM_INIT);
 }
 
 /*
@@ -878,7 +947,7 @@ void __init sync_Arb_IDs(void)
  */
 void __init init_bsp_APIC(void)
 {
-	unsigned long value;
+	unsigned int value;
 
 	/*
 	 * Don't do the setup now if we have a SMP BIOS as the
@@ -899,11 +968,13 @@ void __init init_bsp_APIC(void)
 	value &= ~APIC_VECTOR_MASK;
 	value |= APIC_SPIV_APIC_ENABLED;
 
+#ifdef CONFIG_X86_32
 	/* This bit is reserved on P4/Xeon and should be cleared */
 	if ((boot_cpu_data.x86_vendor == X86_VENDOR_INTEL) &&
 	    (boot_cpu_data.x86 == 15))
 		value &= ~APIC_SPIV_FOCUS_DISABLED;
 	else
+#endif
 		value |= APIC_SPIV_FOCUS_DISABLED;
 	value |= SPURIOUS_APIC_VECTOR;
 	apic_write(APIC_SPIV, value);
@@ -922,6 +993,16 @@ static void __cpuinit lapic_setup_esr(void)
 {
 	unsigned long oldvalue, value, maxlvt;
 	if (lapic_is_integrated() && !esr_disable) {
+		if (esr_disable) {
+			/*
+			 * Something untraceable is creating bad interrupts on
+			 * secondary quads ... for the moment, just leave the
+			 * ESR disabled - we can't do anything useful with the
+			 * errors anyway - mbligh
+			 */
+			printk(KERN_INFO "Leaving ESR disabled.\n");
+			return;
+		}
 		/* !82489DX */
 		maxlvt = lapic_get_maxlvt();
 		if (maxlvt > 3)		/* Due to the Pentium erratum 3AP. */
@@ -942,16 +1023,7 @@ static void __cpuinit lapic_setup_esr(void)
 				"vector: 0x%08lx  after: 0x%08lx\n",
 				oldvalue, value);
 	} else {
-		if (esr_disable)
-			/*
-			 * Something untraceable is creating bad interrupts on
-			 * secondary quads ... for the moment, just leave the
-			 * ESR disabled - we can't do anything useful with the
-			 * errors anyway - mbligh
-			 */
-			printk(KERN_INFO "Leaving ESR disabled.\n");
-		else
-			printk(KERN_INFO "No ESR for 82489DX.\n");
+		printk(KERN_INFO "No ESR for 82489DX.\n");
 	}
 }
 
@@ -1089,13 +1161,17 @@ void __cpuinit setup_local_APIC(void)
 
 void __cpuinit end_local_APIC_setup(void)
 {
-	unsigned long value;
-
 	lapic_setup_esr();
-	/* Disable the local apic timer */
-	value = apic_read(APIC_LVTT);
-	value |= (APIC_LVT_MASKED | LOCAL_TIMER_VECTOR);
-	apic_write(APIC_LVTT, value);
+
+#ifdef CONFIG_X86_32
+	{
+		unsigned int value;
+		/* Disable the local apic timer */
+		value = apic_read(APIC_LVTT);
+		value |= (APIC_LVT_MASKED | LOCAL_TIMER_VECTOR);
+		apic_write(APIC_LVTT, value);
+	}
+#endif
 
 	setup_apic_nmi_watchdog(NULL);
 	apic_pm_activate();
@@ -1205,7 +1281,7 @@ void __init init_apic_mappings(void)
 	 * default configuration (or the MP table is broken).
 	 */
 	if (boot_cpu_physical_apicid == -1U)
-		boot_cpu_physical_apicid = GET_APIC_ID(read_apic_id());
+		boot_cpu_physical_apicid = read_apic_id();
 
 }
 
@@ -1242,7 +1318,7 @@ int __init APIC_init_uniprocessor(void)
 	 * might be zero if read from MP tables. Get it from LAPIC.
 	 */
 #ifdef CONFIG_CRASH_DUMP
-	boot_cpu_physical_apicid = GET_APIC_ID(read_apic_id());
+	boot_cpu_physical_apicid = read_apic_id();
 #endif
 	physid_set_mask_of_physid(boot_cpu_physical_apicid, &phys_cpu_present_map);
 
@@ -1321,59 +1397,12 @@ void smp_error_interrupt(struct pt_regs *regs)
 	irq_exit();
 }
 
-#ifdef CONFIG_SMP
-void __init smp_intr_init(void)
-{
-	/*
-	 * IRQ0 must be given a fixed assignment and initialized,
-	 * because it's used before the IO-APIC is set up.
-	 */
-	set_intr_gate(FIRST_DEVICE_VECTOR, interrupt[0]);
-
-	/*
-	 * The reschedule interrupt is a CPU-to-CPU reschedule-helper
-	 * IPI, driven by wakeup.
-	 */
-	alloc_intr_gate(RESCHEDULE_VECTOR, reschedule_interrupt);
-
-	/* IPI for invalidation */
-	alloc_intr_gate(INVALIDATE_TLB_VECTOR, invalidate_interrupt);
-
-	/* IPI for generic function call */
-	alloc_intr_gate(CALL_FUNCTION_VECTOR, call_function_interrupt);
-
-	/* IPI for single call function */
-	set_intr_gate(CALL_FUNCTION_SINGLE_VECTOR,
-				call_function_single_interrupt);
-}
-#endif
-
-/*
- * Initialize APIC interrupts
- */
-void __init apic_intr_init(void)
-{
-#ifdef CONFIG_SMP
-	smp_intr_init();
-#endif
-	/* self generated IPI for local APIC timer */
-	alloc_intr_gate(LOCAL_TIMER_VECTOR, apic_timer_interrupt);
-
-	/* IPI vectors for APIC spurious and error interrupts */
-	alloc_intr_gate(SPURIOUS_APIC_VECTOR, spurious_interrupt);
-	alloc_intr_gate(ERROR_APIC_VECTOR, error_interrupt);
-
-	/* thermal monitor LVT interrupt */
-#ifdef CONFIG_X86_MCE_P4THERMAL
-	alloc_intr_gate(THERMAL_APIC_VECTOR, thermal_interrupt);
-#endif
-}
-
 /**
  * connect_bsp_APIC - attach the APIC to the interrupt system
  */
 void __init connect_bsp_APIC(void)
 {
+#ifdef CONFIG_X86_32
 	if (pic_mode) {
 		/*
 		 * Do not trust the local APIC being empty at bootup.
@@ -1388,6 +1417,7 @@ void __init connect_bsp_APIC(void)
 		outb(0x70, 0x22);
 		outb(0x01, 0x23);
 	}
+#endif
 	enable_apic_mode();
 }
 
@@ -1400,6 +1430,9 @@ void __init connect_bsp_APIC(void)
  */
 void disconnect_bsp_APIC(int virt_wire_setup)
 {
+	unsigned int value;
+
+#ifdef CONFIG_X86_32
 	if (pic_mode) {
 		/*
 		 * Put the board back into PIC mode (has an effect only on
@@ -1411,54 +1444,53 @@ void disconnect_bsp_APIC(int virt_wire_setup)
 				"entering PIC mode.\n");
 		outb(0x70, 0x22);
 		outb(0x00, 0x23);
-	} else {
-		/* Go back to Virtual Wire compatibility mode */
-		unsigned long value;
+		return;
+	}
+#endif
 
-		/* For the spurious interrupt use vector F, and enable it */
-		value = apic_read(APIC_SPIV);
-		value &= ~APIC_VECTOR_MASK;
-		value |= APIC_SPIV_APIC_ENABLED;
-		value |= 0xf;
-		apic_write(APIC_SPIV, value);
+	/* Go back to Virtual Wire compatibility mode */
 
-		if (!virt_wire_setup) {
-			/*
-			 * For LVT0 make it edge triggered, active high,
-			 * external and enabled
-			 */
-			value = apic_read(APIC_LVT0);
-			value &= ~(APIC_MODE_MASK | APIC_SEND_PENDING |
-				APIC_INPUT_POLARITY | APIC_LVT_REMOTE_IRR |
-				APIC_LVT_LEVEL_TRIGGER | APIC_LVT_MASKED);
-			value |= APIC_LVT_REMOTE_IRR | APIC_SEND_PENDING;
-			value = SET_APIC_DELIVERY_MODE(value, APIC_MODE_EXTINT);
-			apic_write(APIC_LVT0, value);
-		} else {
-			/* Disable LVT0 */
-			apic_write(APIC_LVT0, APIC_LVT_MASKED);
-		}
+	/* For the spurious interrupt use vector F, and enable it */
+	value = apic_read(APIC_SPIV);
+	value &= ~APIC_VECTOR_MASK;
+	value |= APIC_SPIV_APIC_ENABLED;
+	value |= 0xf;
+	apic_write(APIC_SPIV, value);
 
+	if (!virt_wire_setup) {
 		/*
-		 * For LVT1 make it edge triggered, active high, nmi and
-		 * enabled
+		 * For LVT0 make it edge triggered, active high,
+		 * external and enabled
 		 */
-		value = apic_read(APIC_LVT1);
-		value &= ~(
-			APIC_MODE_MASK | APIC_SEND_PENDING |
+		value = apic_read(APIC_LVT0);
+		value &= ~(APIC_MODE_MASK | APIC_SEND_PENDING |
 			APIC_INPUT_POLARITY | APIC_LVT_REMOTE_IRR |
 			APIC_LVT_LEVEL_TRIGGER | APIC_LVT_MASKED);
 		value |= APIC_LVT_REMOTE_IRR | APIC_SEND_PENDING;
-		value = SET_APIC_DELIVERY_MODE(value, APIC_MODE_NMI);
-		apic_write(APIC_LVT1, value);
+		value = SET_APIC_DELIVERY_MODE(value, APIC_MODE_EXTINT);
+		apic_write(APIC_LVT0, value);
+	} else {
+		/* Disable LVT0 */
+		apic_write(APIC_LVT0, APIC_LVT_MASKED);
 	}
+
+	/*
+	 * For LVT1 make it edge triggered, active high,
+	 * nmi and enabled
+	 */
+	value = apic_read(APIC_LVT1);
+	value &= ~(APIC_MODE_MASK | APIC_SEND_PENDING |
+			APIC_INPUT_POLARITY | APIC_LVT_REMOTE_IRR |
+			APIC_LVT_LEVEL_TRIGGER | APIC_LVT_MASKED);
+	value |= APIC_LVT_REMOTE_IRR | APIC_SEND_PENDING;
+	value = SET_APIC_DELIVERY_MODE(value, APIC_MODE_NMI);
+	apic_write(APIC_LVT1, value);
 }
 
 void __cpuinit generic_processor_info(int apicid, int version)
 {
 	int cpu;
 	cpumask_t tmp_map;
-	physid_mask_t phys_cpu;
 
 	/*
 	 * Validate version
@@ -1471,9 +1503,6 @@ void __cpuinit generic_processor_info(int apicid, int version)
 	}
 	apic_version[apicid] = version;
 
-	phys_cpu = apicid_to_cpu_present(apicid);
-	physids_or(phys_cpu_present_map, phys_cpu_present_map, phys_cpu);
-
 	if (num_processors >= NR_CPUS) {
 		printk(KERN_WARNING "WARNING: NR_CPUS limit of %i reached."
 			"  Processor ignored.\n", NR_CPUS);
@@ -1484,17 +1513,19 @@ void __cpuinit generic_processor_info(int apicid, int version)
 	cpus_complement(tmp_map, cpu_present_map);
 	cpu = first_cpu(tmp_map);
 
-	if (apicid == boot_cpu_physical_apicid)
+	physid_set(apicid, phys_cpu_present_map);
+	if (apicid == boot_cpu_physical_apicid) {
 		/*
 		 * x86_bios_cpu_apicid is required to have processors listed
 		 * in same order as logical cpu numbers. Hence the first
 		 * entry is BSP, and so on.
 		 */
 		cpu = 0;
-
+	}
 	if (apicid > max_physical_apicid)
 		max_physical_apicid = apicid;
 
+#ifdef CONFIG_X86_32
 	/*
 	 * Would be preferable to switch to bigsmp when CONFIG_HOTPLUG_CPU=y
 	 * but we need to work other dependencies like SMP_SUSPEND etc
@@ -1514,7 +1545,9 @@ void __cpuinit generic_processor_info(int apicid, int version)
 			def_to_bigsmp = 1;
 		}
 	}
-#ifdef CONFIG_SMP
+#endif
+
+#if defined(CONFIG_X86_SMP) || defined(CONFIG_X86_64)
 	/* are we being called early in kernel startup? */
 	if (early_per_cpu_ptr(x86_cpu_to_apicid)) {
 		u16 *cpu_to_apicid = early_per_cpu_ptr(x86_cpu_to_apicid);
@@ -1527,6 +1560,7 @@ void __cpuinit generic_processor_info(int apicid, int version)
 		per_cpu(x86_bios_cpu_apicid, cpu) = apicid;
 	}
 #endif
+
 	cpu_set(cpu, cpu_possible_map);
 	cpu_set(cpu, cpu_present_map);
 }
@@ -1537,6 +1571,11 @@ void __cpuinit generic_processor_info(int apicid, int version)
 #ifdef CONFIG_PM
 
 static struct {
+	/*
+	 * 'active' is true if the local APIC was enabled by us and
+	 * not the BIOS; this signifies that we are also responsible
+	 * for disabling it before entering apm/acpi suspend
+	 */
 	int active;
 	/* r/w apic fields */
 	unsigned int apic_id;
@@ -1577,7 +1616,7 @@ static int lapic_suspend(struct sys_device *dev, pm_message_t state)
 	apic_pm_state.apic_lvterr = apic_read(APIC_LVTERR);
 	apic_pm_state.apic_tmict = apic_read(APIC_TMICT);
 	apic_pm_state.apic_tdcr = apic_read(APIC_TDCR);
-#ifdef CONFIG_X86_MCE_P4THERMAL
+#if defined(CONFIG_X86_MCE_P4THERMAL) || defined(CONFIG_X86_MCE_INTEL)
 	if (maxlvt >= 5)
 		apic_pm_state.apic_thmr = apic_read(APIC_LVTTHMR);
 #endif
@@ -1601,16 +1640,23 @@ static int lapic_resume(struct sys_device *dev)
 
 	local_irq_save(flags);
 
-	/*
-	 * Make sure the APICBASE points to the right address
-	 *
-	 * FIXME! This will be wrong if we ever support suspend on
-	 * SMP! We'll need to do this as part of the CPU restore!
-	 */
-	rdmsr(MSR_IA32_APICBASE, l, h);
-	l &= ~MSR_IA32_APICBASE_BASE;
-	l |= MSR_IA32_APICBASE_ENABLE | mp_lapic_addr;
-	wrmsr(MSR_IA32_APICBASE, l, h);
+#ifdef CONFIG_X86_64
+	if (x2apic)
+		enable_x2apic();
+	else
+#endif
+	{
+		/*
+		 * Make sure the APICBASE points to the right address
+		 *
+		 * FIXME! This will be wrong if we ever support suspend on
+		 * SMP! We'll need to do this as part of the CPU restore!
+		 */
+		rdmsr(MSR_IA32_APICBASE, l, h);
+		l &= ~MSR_IA32_APICBASE_BASE;
+		l |= MSR_IA32_APICBASE_ENABLE | mp_lapic_addr;
+		wrmsr(MSR_IA32_APICBASE, l, h);
+	}
 
 	apic_write(APIC_LVTERR, ERROR_APIC_VECTOR | APIC_LVT_MASKED);
 	apic_write(APIC_ID, apic_pm_state.apic_id);
@@ -1620,7 +1666,7 @@ static int lapic_resume(struct sys_device *dev)
 	apic_write(APIC_SPIV, apic_pm_state.apic_spiv);
 	apic_write(APIC_LVT0, apic_pm_state.apic_lvt0);
 	apic_write(APIC_LVT1, apic_pm_state.apic_lvt1);
-#ifdef CONFIG_X86_MCE_P4THERMAL
+#if defined(CONFIG_X86_MCE_P4THERMAL) || defined(CONFIG_X86_MCE_INTEL)
 	if (maxlvt >= 5)
 		apic_write(APIC_LVTTHMR, apic_pm_state.apic_thmr);
 #endif
@@ -1634,7 +1680,9 @@ static int lapic_resume(struct sys_device *dev)
 	apic_write(APIC_LVTERR, apic_pm_state.apic_lvterr);
 	apic_write(APIC_ESR, 0);
 	apic_read(APIC_ESR);
+
 	local_irq_restore(flags);
+
 	return 0;
 }
 
@@ -1690,20 +1738,20 @@ static int __init parse_lapic(char *arg)
 }
 early_param("lapic", parse_lapic);
 
-static int __init parse_nolapic(char *arg)
+static int __init setup_disableapic(char *arg)
 {
 	disable_apic = 1;
 	setup_clear_cpu_cap(X86_FEATURE_APIC);
 	return 0;
 }
-early_param("nolapic", parse_nolapic);
+early_param("disableapic", setup_disableapic);
 
-static int __init parse_disable_lapic_timer(char *arg)
+/* same as disableapic, for compatibility */
+static int __init setup_nolapic(char *arg)
 {
-	local_apic_timer_disabled = 1;
-	return 0;
+	return setup_disableapic(arg);
 }
-early_param("nolapic_timer", parse_disable_lapic_timer);
+early_param("nolapic", setup_nolapic);
 
 static int __init parse_lapic_timer_c2_ok(char *arg)
 {
@@ -1712,15 +1760,40 @@ static int __init parse_lapic_timer_c2_ok(char *arg)
 }
 early_param("lapic_timer_c2_ok", parse_lapic_timer_c2_ok);
 
+static int __init parse_disable_apic_timer(char *arg)
+{
+	disable_apic_timer = 1;
+	return 0;
+}
+early_param("noapictimer", parse_disable_apic_timer);
+
+static int __init parse_nolapic_timer(char *arg)
+{
+	disable_apic_timer = 1;
+	return 0;
+}
+early_param("nolapic_timer", parse_nolapic_timer);
+
 static int __init apic_set_verbosity(char *arg)
 {
-	if (!arg)
+	if (!arg)  {
+#ifdef CONFIG_X86_64
+		skip_ioapic_setup = 0;
+		ioapic_force = 1;
+		return 0;
+#endif
 		return -EINVAL;
+	}
 
-	if (strcmp(arg, "debug") == 0)
+	if (strcmp("debug", arg) == 0)
 		apic_verbosity = APIC_DEBUG;
-	else if (strcmp(arg, "verbose") == 0)
+	else if (strcmp("verbose", arg) == 0)
 		apic_verbosity = APIC_VERBOSE;
+	else {
+		printk(KERN_WARNING "APIC Verbosity level %s not recognised"
+			" use apic=verbose or apic=debug\n", arg);
+		return -EINVAL;
+	}
 
 	return 0;
 }