summaryrefslogtreecommitdiffstats
path: root/arch/sparc64/kernel/entry.S
diff options
context:
space:
mode:
Diffstat (limited to 'arch/sparc64/kernel/entry.S')
-rw-r--r--arch/sparc64/kernel/entry.S293
1 files changed, 181 insertions, 112 deletions
diff --git a/arch/sparc64/kernel/entry.S b/arch/sparc64/kernel/entry.S
index 88332f00094..cecdc0a7521 100644
--- a/arch/sparc64/kernel/entry.S
+++ b/arch/sparc64/kernel/entry.S
@@ -21,6 +21,7 @@
#include <asm/visasm.h>
#include <asm/estate.h>
#include <asm/auxio.h>
+#include <asm/sfafsr.h>
#define curptr g6
@@ -690,14 +691,159 @@ netbsd_syscall:
retl
nop
- /* These next few routines must be sure to clear the
- * SFSR FaultValid bit so that the fast tlb data protection
- * handler does not flush the wrong context and lock up the
- * box.
+ /* We need to carefully read the error status, ACK
+ * the errors, prevent recursive traps, and pass the
+ * information on to C code for logging.
+ *
+ * We pass the AFAR in as-is, and we encode the status
+ * information as described in asm-sparc64/sfafsr.h
+ */
+ .globl __spitfire_access_error
+__spitfire_access_error:
+ /* Disable ESTATE error reporting so that we do not
+ * take recursive traps and RED state the processor.
+ */
+ stxa %g0, [%g0] ASI_ESTATE_ERROR_EN
+ membar #Sync
+
+ mov UDBE_UE, %g1
+ ldxa [%g0] ASI_AFSR, %g4 ! Get AFSR
+
+ /* __spitfire_cee_trap branches here with AFSR in %g4 and
+ * UDBE_CE in %g1. It only clears ESTATE_ERR_CE in the
+ * ESTATE Error Enable register.
+ */
+__spitfire_cee_trap_continue:
+ ldxa [%g0] ASI_AFAR, %g5 ! Get AFAR
+
+ rdpr %tt, %g3
+ and %g3, 0x1ff, %g3 ! Paranoia
+ sllx %g3, SFSTAT_TRAP_TYPE_SHIFT, %g3
+ or %g4, %g3, %g4
+ rdpr %tl, %g3
+ cmp %g3, 1
+ mov 1, %g3
+ bleu %xcc, 1f
+ sllx %g3, SFSTAT_TL_GT_ONE_SHIFT, %g3
+
+ or %g4, %g3, %g4
+
+ /* Read in the UDB error register state, clearing the
+ * sticky error bits as-needed. We only clear them if
+ * the UE bit is set. Likewise, __spitfire_cee_trap
+ * below will only do so if the CE bit is set.
+ *
+ * NOTE: UltraSparc-I/II have high and low UDB error
+ * registers, corresponding to the two UDB units
+ * present on those chips. UltraSparc-IIi only
+ * has a single UDB, called "SDB" in the manual.
+ * For IIi the upper UDB register always reads
+ * as zero so for our purposes things will just
+ * work with the checks below.
*/
- .globl __do_data_access_exception
- .globl __do_data_access_exception_tl1
-__do_data_access_exception_tl1:
+1: ldxa [%g0] ASI_UDBH_ERROR_R, %g3
+ and %g3, 0x3ff, %g7 ! Paranoia
+ sllx %g7, SFSTAT_UDBH_SHIFT, %g7
+ or %g4, %g7, %g4
+ andcc %g3, %g1, %g3 ! UDBE_UE or UDBE_CE
+ be,pn %xcc, 1f
+ nop
+ stxa %g3, [%g0] ASI_UDB_ERROR_W
+ membar #Sync
+
+1: mov 0x18, %g3
+ ldxa [%g3] ASI_UDBL_ERROR_R, %g3
+ and %g3, 0x3ff, %g7 ! Paranoia
+ sllx %g7, SFSTAT_UDBL_SHIFT, %g7
+ or %g4, %g7, %g4
+ andcc %g3, %g1, %g3 ! UDBE_UE or UDBE_CE
+ be,pn %xcc, 1f
+ nop
+ mov 0x18, %g7
+ stxa %g3, [%g7] ASI_UDB_ERROR_W
+ membar #Sync
+
+1: /* Ok, now that we've latched the error state,
+ * clear the sticky bits in the AFSR.
+ */
+ stxa %g4, [%g0] ASI_AFSR
+ membar #Sync
+
+ rdpr %tl, %g2
+ cmp %g2, 1
+ rdpr %pil, %g2
+ bleu,pt %xcc, 1f
+ wrpr %g0, 15, %pil
+
+ ba,pt %xcc, etraptl1
+ rd %pc, %g7
+
+ ba,pt %xcc, 2f
+ nop
+
+1: ba,pt %xcc, etrap_irq
+ rd %pc, %g7
+
+2: mov %l4, %o1
+ mov %l5, %o2
+ call spitfire_access_error
+ add %sp, PTREGS_OFF, %o0
+ ba,pt %xcc, rtrap
+ clr %l6
+
+ /* This is the trap handler entry point for ECC correctable
+ * errors. They are corrected, but we listen for the trap
+ * so that the event can be logged.
+ *
+ * Disrupting errors are either:
+ * 1) single-bit ECC errors during UDB reads to system
+ * memory
+ * 2) data parity errors during write-back events
+ *
+ * As far as I can make out from the manual, the CEE trap
+ * is only for correctable errors during memory read
+ * accesses by the front-end of the processor.
+ *
+ * The code below is only for trap level 1 CEE events,
+ * as it is the only situation where we can safely record
+ * and log. For trap level >1 we just clear the CE bit
+ * in the AFSR and return.
+ *
+ * This is just like __spiftire_access_error above, but it
+ * specifically handles correctable errors. If an
+ * uncorrectable error is indicated in the AFSR we
+ * will branch directly above to __spitfire_access_error
+ * to handle it instead. Uncorrectable therefore takes
+ * priority over correctable, and the error logging
+ * C code will notice this case by inspecting the
+ * trap type.
+ */
+ .globl __spitfire_cee_trap
+__spitfire_cee_trap:
+ ldxa [%g0] ASI_AFSR, %g4 ! Get AFSR
+ mov 1, %g3
+ sllx %g3, SFAFSR_UE_SHIFT, %g3
+ andcc %g4, %g3, %g0 ! Check for UE
+ bne,pn %xcc, __spitfire_access_error
+ nop
+
+ /* Ok, in this case we only have a correctable error.
+ * Indicate we only wish to capture that state in register
+ * %g1, and we only disable CE error reporting unlike UE
+ * handling which disables all errors.
+ */
+ ldxa [%g0] ASI_ESTATE_ERROR_EN, %g3
+ andn %g3, ESTATE_ERR_CE, %g3
+ stxa %g3, [%g0] ASI_ESTATE_ERROR_EN
+ membar #Sync
+
+ /* Preserve AFSR in %g4, indicate UDB state to capture in %g1 */
+ ba,pt %xcc, __spitfire_cee_trap_continue
+ mov UDBE_CE, %g1
+
+ .globl __spitfire_data_access_exception
+ .globl __spitfire_data_access_exception_tl1
+__spitfire_data_access_exception_tl1:
rdpr %pstate, %g4
wrpr %g4, PSTATE_MG|PSTATE_AG, %pstate
mov TLB_SFSR, %g3
@@ -706,9 +852,25 @@ __do_data_access_exception_tl1:
ldxa [%g5] ASI_DMMU, %g5 ! Get SFAR
stxa %g0, [%g3] ASI_DMMU ! Clear SFSR.FaultValid bit
membar #Sync
+ rdpr %tt, %g3
+ cmp %g3, 0x80 ! first win spill/fill trap
+ blu,pn %xcc, 1f
+ cmp %g3, 0xff ! last win spill/fill trap
+ bgu,pn %xcc, 1f
+ nop
ba,pt %xcc, winfix_dax
rdpr %tpc, %g3
-__do_data_access_exception:
+1: sethi %hi(109f), %g7
+ ba,pt %xcc, etraptl1
+109: or %g7, %lo(109b), %g7
+ mov %l4, %o1
+ mov %l5, %o2
+ call spitfire_data_access_exception_tl1
+ add %sp, PTREGS_OFF, %o0
+ ba,pt %xcc, rtrap
+ clr %l6
+
+__spitfire_data_access_exception:
rdpr %pstate, %g4
wrpr %g4, PSTATE_MG|PSTATE_AG, %pstate
mov TLB_SFSR, %g3
@@ -722,20 +884,19 @@ __do_data_access_exception:
109: or %g7, %lo(109b), %g7
mov %l4, %o1
mov %l5, %o2
- call data_access_exception
+ call spitfire_data_access_exception
add %sp, PTREGS_OFF, %o0
ba,pt %xcc, rtrap
clr %l6
- .globl __do_instruction_access_exception
- .globl __do_instruction_access_exception_tl1
-__do_instruction_access_exception_tl1:
+ .globl __spitfire_insn_access_exception
+ .globl __spitfire_insn_access_exception_tl1
+__spitfire_insn_access_exception_tl1:
rdpr %pstate, %g4
wrpr %g4, PSTATE_MG|PSTATE_AG, %pstate
mov TLB_SFSR, %g3
- mov DMMU_SFAR, %g5
- ldxa [%g3] ASI_DMMU, %g4 ! Get SFSR
- ldxa [%g5] ASI_DMMU, %g5 ! Get SFAR
+ ldxa [%g3] ASI_IMMU, %g4 ! Get SFSR
+ rdpr %tpc, %g5 ! IMMU has no SFAR, use TPC
stxa %g0, [%g3] ASI_IMMU ! Clear FaultValid bit
membar #Sync
sethi %hi(109f), %g7
@@ -743,18 +904,17 @@ __do_instruction_access_exception_tl1:
109: or %g7, %lo(109b), %g7
mov %l4, %o1
mov %l5, %o2
- call instruction_access_exception_tl1
+ call spitfire_insn_access_exception_tl1
add %sp, PTREGS_OFF, %o0
ba,pt %xcc, rtrap
clr %l6
-__do_instruction_access_exception:
+__spitfire_insn_access_exception:
rdpr %pstate, %g4
wrpr %g4, PSTATE_MG|PSTATE_AG, %pstate
mov TLB_SFSR, %g3
- mov DMMU_SFAR, %g5
- ldxa [%g3] ASI_DMMU, %g4 ! Get SFSR
- ldxa [%g5] ASI_DMMU, %g5 ! Get SFAR
+ ldxa [%g3] ASI_IMMU, %g4 ! Get SFSR
+ rdpr %tpc, %g5 ! IMMU has no SFAR, use TPC
stxa %g0, [%g3] ASI_IMMU ! Clear FaultValid bit
membar #Sync
sethi %hi(109f), %g7
@@ -762,102 +922,11 @@ __do_instruction_access_exception:
109: or %g7, %lo(109b), %g7
mov %l4, %o1
mov %l5, %o2
- call instruction_access_exception
+ call spitfire_insn_access_exception
add %sp, PTREGS_OFF, %o0
ba,pt %xcc, rtrap
clr %l6
- /* This is the trap handler entry point for ECC correctable
- * errors. They are corrected, but we listen for the trap
- * so that the event can be logged.
- *
- * Disrupting errors are either:
- * 1) single-bit ECC errors during UDB reads to system
- * memory
- * 2) data parity errors during write-back events
- *
- * As far as I can make out from the manual, the CEE trap
- * is only for correctable errors during memory read
- * accesses by the front-end of the processor.
- *
- * The code below is only for trap level 1 CEE events,
- * as it is the only situation where we can safely record
- * and log. For trap level >1 we just clear the CE bit
- * in the AFSR and return.
- */
-
- /* Our trap handling infrastructure allows us to preserve
- * two 64-bit values during etrap for arguments to
- * subsequent C code. Therefore we encode the information
- * as follows:
- *
- * value 1) Full 64-bits of AFAR
- * value 2) Low 33-bits of AFSR, then bits 33-->42
- * are UDBL error status and bits 43-->52
- * are UDBH error status
- */
- .align 64
- .globl cee_trap
-cee_trap:
- ldxa [%g0] ASI_AFSR, %g1 ! Read AFSR
- ldxa [%g0] ASI_AFAR, %g2 ! Read AFAR
- sllx %g1, 31, %g1 ! Clear reserved bits
- srlx %g1, 31, %g1 ! in AFSR
-
- /* NOTE: UltraSparc-I/II have high and low UDB error
- * registers, corresponding to the two UDB units
- * present on those chips. UltraSparc-IIi only
- * has a single UDB, called "SDB" in the manual.
- * For IIi the upper UDB register always reads
- * as zero so for our purposes things will just
- * work with the checks below.
- */
- ldxa [%g0] ASI_UDBL_ERROR_R, %g3 ! Read UDB-Low error status
- andcc %g3, (1 << 8), %g4 ! Check CE bit
- sllx %g3, (64 - 10), %g3 ! Clear reserved bits
- srlx %g3, (64 - 10), %g3 ! in UDB-Low error status
-
- sllx %g3, (33 + 0), %g3 ! Shift up to encoding area
- or %g1, %g3, %g1 ! Or it in
- be,pn %xcc, 1f ! Branch if CE bit was clear
- nop
- stxa %g4, [%g0] ASI_UDB_ERROR_W ! Clear CE sticky bit in UDBL
- membar #Sync ! Synchronize ASI stores
-1: mov 0x18, %g5 ! Addr of UDB-High error status
- ldxa [%g5] ASI_UDBH_ERROR_R, %g3 ! Read it
-
- andcc %g3, (1 << 8), %g4 ! Check CE bit
- sllx %g3, (64 - 10), %g3 ! Clear reserved bits
- srlx %g3, (64 - 10), %g3 ! in UDB-High error status
- sllx %g3, (33 + 10), %g3 ! Shift up to encoding area
- or %g1, %g3, %g1 ! Or it in
- be,pn %xcc, 1f ! Branch if CE bit was clear
- nop
- nop
-
- stxa %g4, [%g5] ASI_UDB_ERROR_W ! Clear CE sticky bit in UDBH
- membar #Sync ! Synchronize ASI stores
-1: mov 1, %g5 ! AFSR CE bit is
- sllx %g5, 20, %g5 ! bit 20
- stxa %g5, [%g0] ASI_AFSR ! Clear CE sticky bit in AFSR
- membar #Sync ! Synchronize ASI stores
- sllx %g2, (64 - 41), %g2 ! Clear reserved bits
- srlx %g2, (64 - 41), %g2 ! in latched AFAR
-
- andn %g2, 0x0f, %g2 ! Finish resv bit clearing
- mov %g1, %g4 ! Move AFSR+UDB* into save reg
- mov %g2, %g5 ! Move AFAR into save reg
- rdpr %pil, %g2
- wrpr %g0, 15, %pil
- ba,pt %xcc, etrap_irq
- rd %pc, %g7
- mov %l4, %o0
-
- mov %l5, %o1
- call cee_log
- add %sp, PTREGS_OFF, %o2
- ba,a,pt %xcc, rtrap_irq
-
/* Capture I/D/E-cache state into per-cpu error scoreboard.
*
* %g1: (TL>=0) ? 1 : 0