summaryrefslogtreecommitdiffstats
path: root/arch/ppc/syslib/ppc4xx_dma.c
diff options
context:
space:
mode:
Diffstat (limited to 'arch/ppc/syslib/ppc4xx_dma.c')
-rw-r--r--arch/ppc/syslib/ppc4xx_dma.c710
1 files changed, 0 insertions, 710 deletions
diff --git a/arch/ppc/syslib/ppc4xx_dma.c b/arch/ppc/syslib/ppc4xx_dma.c
deleted file mode 100644
index bd301868996..00000000000
--- a/arch/ppc/syslib/ppc4xx_dma.c
+++ /dev/null
@@ -1,710 +0,0 @@
-/*
- * IBM PPC4xx DMA engine core library
- *
- * Copyright 2000-2004 MontaVista Software Inc.
- *
- * Cleaned up and converted to new DCR access
- * Matt Porter <mporter@kernel.crashing.org>
- *
- * Original code by Armin Kuster <akuster@mvista.com>
- * and Pete Popov <ppopov@mvista.com>
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License as published by the
- * Free Software Foundation; either version 2 of the License, or (at your
- * option) any later version.
- *
- * You should have received a copy of the GNU General Public License along
- * with this program; if not, write to the Free Software Foundation, Inc.,
- * 675 Mass Ave, Cambridge, MA 02139, USA.
- */
-
-#include <linux/kernel.h>
-#include <linux/mm.h>
-#include <linux/miscdevice.h>
-#include <linux/init.h>
-#include <linux/module.h>
-
-#include <asm/system.h>
-#include <asm/io.h>
-#include <asm/dma.h>
-#include <asm/ppc4xx_dma.h>
-
-ppc_dma_ch_t dma_channels[MAX_PPC4xx_DMA_CHANNELS];
-
-int
-ppc4xx_get_dma_status(void)
-{
- return (mfdcr(DCRN_DMASR));
-}
-
-void
-ppc4xx_set_src_addr(int dmanr, phys_addr_t src_addr)
-{
- if (dmanr >= MAX_PPC4xx_DMA_CHANNELS) {
- printk("set_src_addr: bad channel: %d\n", dmanr);
- return;
- }
-
-#ifdef PPC4xx_DMA_64BIT
- mtdcr(DCRN_DMASAH0 + dmanr*2, (u32)(src_addr >> 32));
-#else
- mtdcr(DCRN_DMASA0 + dmanr*2, (u32)src_addr);
-#endif
-}
-
-void
-ppc4xx_set_dst_addr(int dmanr, phys_addr_t dst_addr)
-{
- if (dmanr >= MAX_PPC4xx_DMA_CHANNELS) {
- printk("set_dst_addr: bad channel: %d\n", dmanr);
- return;
- }
-
-#ifdef PPC4xx_DMA_64BIT
- mtdcr(DCRN_DMADAH0 + dmanr*2, (u32)(dst_addr >> 32));
-#else
- mtdcr(DCRN_DMADA0 + dmanr*2, (u32)dst_addr);
-#endif
-}
-
-void
-ppc4xx_enable_dma(unsigned int dmanr)
-{
- unsigned int control;
- ppc_dma_ch_t *p_dma_ch = &dma_channels[dmanr];
- unsigned int status_bits[] = { DMA_CS0 | DMA_TS0 | DMA_CH0_ERR,
- DMA_CS1 | DMA_TS1 | DMA_CH1_ERR,
- DMA_CS2 | DMA_TS2 | DMA_CH2_ERR,
- DMA_CS3 | DMA_TS3 | DMA_CH3_ERR};
-
- if (p_dma_ch->in_use) {
- printk("enable_dma: channel %d in use\n", dmanr);
- return;
- }
-
- if (dmanr >= MAX_PPC4xx_DMA_CHANNELS) {
- printk("enable_dma: bad channel: %d\n", dmanr);
- return;
- }
-
- if (p_dma_ch->mode == DMA_MODE_READ) {
- /* peripheral to memory */
- ppc4xx_set_src_addr(dmanr, 0);
- ppc4xx_set_dst_addr(dmanr, p_dma_ch->addr);
- } else if (p_dma_ch->mode == DMA_MODE_WRITE) {
- /* memory to peripheral */
- ppc4xx_set_src_addr(dmanr, p_dma_ch->addr);
- ppc4xx_set_dst_addr(dmanr, 0);
- }
-
- /* for other xfer modes, the addresses are already set */
- control = mfdcr(DCRN_DMACR0 + (dmanr * 0x8));
-
- control &= ~(DMA_TM_MASK | DMA_TD); /* clear all mode bits */
- if (p_dma_ch->mode == DMA_MODE_MM) {
- /* software initiated memory to memory */
- control |= DMA_ETD_OUTPUT | DMA_TCE_ENABLE;
- }
-
- mtdcr(DCRN_DMACR0 + (dmanr * 0x8), control);
-
- /*
- * Clear the CS, TS, RI bits for the channel from DMASR. This
- * has been observed to happen correctly only after the mode and
- * ETD/DCE bits in DMACRx are set above. Must do this before
- * enabling the channel.
- */
-
- mtdcr(DCRN_DMASR, status_bits[dmanr]);
-
- /*
- * For device-paced transfers, Terminal Count Enable apparently
- * must be on, and this must be turned on after the mode, etc.
- * bits are cleared above (at least on Redwood-6).
- */
-
- if ((p_dma_ch->mode == DMA_MODE_MM_DEVATDST) ||
- (p_dma_ch->mode == DMA_MODE_MM_DEVATSRC))
- control |= DMA_TCE_ENABLE;
-
- /*
- * Now enable the channel.
- */
-
- control |= (p_dma_ch->mode | DMA_CE_ENABLE);
-
- mtdcr(DCRN_DMACR0 + (dmanr * 0x8), control);
-
- p_dma_ch->in_use = 1;
-}
-
-void
-ppc4xx_disable_dma(unsigned int dmanr)
-{
- unsigned int control;
- ppc_dma_ch_t *p_dma_ch = &dma_channels[dmanr];
-
- if (!p_dma_ch->in_use) {
- printk("disable_dma: channel %d not in use\n", dmanr);
- return;
- }
-
- if (dmanr >= MAX_PPC4xx_DMA_CHANNELS) {
- printk("disable_dma: bad channel: %d\n", dmanr);
- return;
- }
-
- control = mfdcr(DCRN_DMACR0 + (dmanr * 0x8));
- control &= ~DMA_CE_ENABLE;
- mtdcr(DCRN_DMACR0 + (dmanr * 0x8), control);
-
- p_dma_ch->in_use = 0;
-}
-
-/*
- * Sets the dma mode for single DMA transfers only.
- * For scatter/gather transfers, the mode is passed to the
- * alloc_dma_handle() function as one of the parameters.
- *
- * The mode is simply saved and used later. This allows
- * the driver to call set_dma_mode() and set_dma_addr() in
- * any order.
- *
- * Valid mode values are:
- *
- * DMA_MODE_READ peripheral to memory
- * DMA_MODE_WRITE memory to peripheral
- * DMA_MODE_MM memory to memory
- * DMA_MODE_MM_DEVATSRC device-paced memory to memory, device at src
- * DMA_MODE_MM_DEVATDST device-paced memory to memory, device at dst
- */
-int
-ppc4xx_set_dma_mode(unsigned int dmanr, unsigned int mode)
-{
- ppc_dma_ch_t *p_dma_ch = &dma_channels[dmanr];
-
- if (dmanr >= MAX_PPC4xx_DMA_CHANNELS) {
- printk("set_dma_mode: bad channel 0x%x\n", dmanr);
- return DMA_STATUS_BAD_CHANNEL;
- }
-
- p_dma_ch->mode = mode;
-
- return DMA_STATUS_GOOD;
-}
-
-/*
- * Sets the DMA Count register. Note that 'count' is in bytes.
- * However, the DMA Count register counts the number of "transfers",
- * where each transfer is equal to the bus width. Thus, count
- * MUST be a multiple of the bus width.
- */
-void
-ppc4xx_set_dma_count(unsigned int dmanr, unsigned int count)
-{
- ppc_dma_ch_t *p_dma_ch = &dma_channels[dmanr];
-
-#ifdef DEBUG_4xxDMA
- {
- int error = 0;
- switch (p_dma_ch->pwidth) {
- case PW_8:
- break;
- case PW_16:
- if (count & 0x1)
- error = 1;
- break;
- case PW_32:
- if (count & 0x3)
- error = 1;
- break;
- case PW_64:
- if (count & 0x7)
- error = 1;
- break;
- default:
- printk("set_dma_count: invalid bus width: 0x%x\n",
- p_dma_ch->pwidth);
- return;
- }
- if (error)
- printk
- ("Warning: set_dma_count count 0x%x bus width %d\n",
- count, p_dma_ch->pwidth);
- }
-#endif
-
- count = count >> p_dma_ch->shift;
-
- mtdcr(DCRN_DMACT0 + (dmanr * 0x8), count);
-}
-
-/*
- * Returns the number of bytes left to be transferred.
- * After a DMA transfer, this should return zero.
- * Reading this while a DMA transfer is still in progress will return
- * unpredictable results.
- */
-int
-ppc4xx_get_dma_residue(unsigned int dmanr)
-{
- unsigned int count;
- ppc_dma_ch_t *p_dma_ch = &dma_channels[dmanr];
-
- if (dmanr >= MAX_PPC4xx_DMA_CHANNELS) {
- printk("ppc4xx_get_dma_residue: bad channel 0x%x\n", dmanr);
- return DMA_STATUS_BAD_CHANNEL;
- }
-
- count = mfdcr(DCRN_DMACT0 + (dmanr * 0x8));
-
- return (count << p_dma_ch->shift);
-}
-
-/*
- * Sets the DMA address for a memory to peripheral or peripheral
- * to memory transfer. The address is just saved in the channel
- * structure for now and used later in enable_dma().
- */
-void
-ppc4xx_set_dma_addr(unsigned int dmanr, phys_addr_t addr)
-{
- ppc_dma_ch_t *p_dma_ch = &dma_channels[dmanr];
-
- if (dmanr >= MAX_PPC4xx_DMA_CHANNELS) {
- printk("ppc4xx_set_dma_addr: bad channel: %d\n", dmanr);
- return;
- }
-
-#ifdef DEBUG_4xxDMA
- {
- int error = 0;
- switch (p_dma_ch->pwidth) {
- case PW_8:
- break;
- case PW_16:
- if ((unsigned) addr & 0x1)
- error = 1;
- break;
- case PW_32:
- if ((unsigned) addr & 0x3)
- error = 1;
- break;
- case PW_64:
- if ((unsigned) addr & 0x7)
- error = 1;
- break;
- default:
- printk("ppc4xx_set_dma_addr: invalid bus width: 0x%x\n",
- p_dma_ch->pwidth);
- return;
- }
- if (error)
- printk("Warning: ppc4xx_set_dma_addr addr 0x%x bus width %d\n",
- addr, p_dma_ch->pwidth);
- }
-#endif
-
- /* save dma address and program it later after we know the xfer mode */
- p_dma_ch->addr = addr;
-}
-
-/*
- * Sets both DMA addresses for a memory to memory transfer.
- * For memory to peripheral or peripheral to memory transfers
- * the function set_dma_addr() should be used instead.
- */
-void
-ppc4xx_set_dma_addr2(unsigned int dmanr, phys_addr_t src_dma_addr,
- phys_addr_t dst_dma_addr)
-{
- if (dmanr >= MAX_PPC4xx_DMA_CHANNELS) {
- printk("ppc4xx_set_dma_addr2: bad channel: %d\n", dmanr);
- return;
- }
-
-#ifdef DEBUG_4xxDMA
- {
- ppc_dma_ch_t *p_dma_ch = &dma_channels[dmanr];
- int error = 0;
- switch (p_dma_ch->pwidth) {
- case PW_8:
- break;
- case PW_16:
- if (((unsigned) src_dma_addr & 0x1) ||
- ((unsigned) dst_dma_addr & 0x1)
- )
- error = 1;
- break;
- case PW_32:
- if (((unsigned) src_dma_addr & 0x3) ||
- ((unsigned) dst_dma_addr & 0x3)
- )
- error = 1;
- break;
- case PW_64:
- if (((unsigned) src_dma_addr & 0x7) ||
- ((unsigned) dst_dma_addr & 0x7)
- )
- error = 1;
- break;
- default:
- printk("ppc4xx_set_dma_addr2: invalid bus width: 0x%x\n",
- p_dma_ch->pwidth);
- return;
- }
- if (error)
- printk
- ("Warning: ppc4xx_set_dma_addr2 src 0x%x dst 0x%x bus width %d\n",
- src_dma_addr, dst_dma_addr, p_dma_ch->pwidth);
- }
-#endif
-
- ppc4xx_set_src_addr(dmanr, src_dma_addr);
- ppc4xx_set_dst_addr(dmanr, dst_dma_addr);
-}
-
-/*
- * Enables the channel interrupt.
- *
- * If performing a scatter/gatter transfer, this function
- * MUST be called before calling alloc_dma_handle() and building
- * the sgl list. Otherwise, interrupts will not be enabled, if
- * they were previously disabled.
- */
-int
-ppc4xx_enable_dma_interrupt(unsigned int dmanr)
-{
- unsigned int control;
- ppc_dma_ch_t *p_dma_ch = &dma_channels[dmanr];
-
- if (dmanr >= MAX_PPC4xx_DMA_CHANNELS) {
- printk("ppc4xx_enable_dma_interrupt: bad channel: %d\n", dmanr);
- return DMA_STATUS_BAD_CHANNEL;
- }
-
- p_dma_ch->int_enable = 1;
-
- control = mfdcr(DCRN_DMACR0 + (dmanr * 0x8));
- control |= DMA_CIE_ENABLE; /* Channel Interrupt Enable */
- mtdcr(DCRN_DMACR0 + (dmanr * 0x8), control);
-
- return DMA_STATUS_GOOD;
-}
-
-/*
- * Disables the channel interrupt.
- *
- * If performing a scatter/gatter transfer, this function
- * MUST be called before calling alloc_dma_handle() and building
- * the sgl list. Otherwise, interrupts will not be disabled, if
- * they were previously enabled.
- */
-int
-ppc4xx_disable_dma_interrupt(unsigned int dmanr)
-{
- unsigned int control;
- ppc_dma_ch_t *p_dma_ch = &dma_channels[dmanr];
-
- if (dmanr >= MAX_PPC4xx_DMA_CHANNELS) {
- printk("ppc4xx_disable_dma_interrupt: bad channel: %d\n", dmanr);
- return DMA_STATUS_BAD_CHANNEL;
- }
-
- p_dma_ch->int_enable = 0;
-
- control = mfdcr(DCRN_DMACR0 + (dmanr * 0x8));
- control &= ~DMA_CIE_ENABLE; /* Channel Interrupt Enable */
- mtdcr(DCRN_DMACR0 + (dmanr * 0x8), control);
-
- return DMA_STATUS_GOOD;
-}
-
-/*
- * Configures a DMA channel, including the peripheral bus width, if a
- * peripheral is attached to the channel, the polarity of the DMAReq and
- * DMAAck signals, etc. This information should really be setup by the boot
- * code, since most likely the configuration won't change dynamically.
- * If the kernel has to call this function, it's recommended that it's
- * called from platform specific init code. The driver should not need to
- * call this function.
- */
-int
-ppc4xx_init_dma_channel(unsigned int dmanr, ppc_dma_ch_t * p_init)
-{
- unsigned int polarity;
- uint32_t control = 0;
- ppc_dma_ch_t *p_dma_ch = &dma_channels[dmanr];
-
- DMA_MODE_READ = (unsigned long) DMA_TD; /* Peripheral to Memory */
- DMA_MODE_WRITE = 0; /* Memory to Peripheral */
-
- if (!p_init) {
- printk("ppc4xx_init_dma_channel: NULL p_init\n");
- return DMA_STATUS_NULL_POINTER;
- }
-
- if (dmanr >= MAX_PPC4xx_DMA_CHANNELS) {
- printk("ppc4xx_init_dma_channel: bad channel %d\n", dmanr);
- return DMA_STATUS_BAD_CHANNEL;
- }
-
-#if DCRN_POL > 0
- polarity = mfdcr(DCRN_POL);
-#else
- polarity = 0;
-#endif
-
- /* Setup the control register based on the values passed to
- * us in p_init. Then, over-write the control register with this
- * new value.
- */
- control |= SET_DMA_CONTROL;
-
- /* clear all polarity signals and then "or" in new signal levels */
- polarity &= ~GET_DMA_POLARITY(dmanr);
- polarity |= p_init->polarity;
-#if DCRN_POL > 0
- mtdcr(DCRN_POL, polarity);
-#endif
- mtdcr(DCRN_DMACR0 + (dmanr * 0x8), control);
-
- /* save these values in our dma channel structure */
- memcpy(p_dma_ch, p_init, sizeof (ppc_dma_ch_t));
-
- /*
- * The peripheral width values written in the control register are:
- * PW_8 0
- * PW_16 1
- * PW_32 2
- * PW_64 3
- *
- * Since the DMA count register takes the number of "transfers",
- * we need to divide the count sent to us in certain
- * functions by the appropriate number. It so happens that our
- * right shift value is equal to the peripheral width value.
- */
- p_dma_ch->shift = p_init->pwidth;
-
- /*
- * Save the control word for easy access.
- */
- p_dma_ch->control = control;
-
- mtdcr(DCRN_DMASR, 0xffffffff); /* clear status register */
- return DMA_STATUS_GOOD;
-}
-
-/*
- * This function returns the channel configuration.
- */
-int
-ppc4xx_get_channel_config(unsigned int dmanr, ppc_dma_ch_t * p_dma_ch)
-{
- unsigned int polarity;
- unsigned int control;
-
- if (dmanr >= MAX_PPC4xx_DMA_CHANNELS) {
- printk("ppc4xx_get_channel_config: bad channel %d\n", dmanr);
- return DMA_STATUS_BAD_CHANNEL;
- }
-
- memcpy(p_dma_ch, &dma_channels[dmanr], sizeof (ppc_dma_ch_t));
-
-#if DCRN_POL > 0
- polarity = mfdcr(DCRN_POL);
-#else
- polarity = 0;
-#endif
-
- p_dma_ch->polarity = polarity & GET_DMA_POLARITY(dmanr);
- control = mfdcr(DCRN_DMACR0 + (dmanr * 0x8));
-
- p_dma_ch->cp = GET_DMA_PRIORITY(control);
- p_dma_ch->pwidth = GET_DMA_PW(control);
- p_dma_ch->psc = GET_DMA_PSC(control);
- p_dma_ch->pwc = GET_DMA_PWC(control);
- p_dma_ch->phc = GET_DMA_PHC(control);
- p_dma_ch->ce = GET_DMA_CE_ENABLE(control);
- p_dma_ch->int_enable = GET_DMA_CIE_ENABLE(control);
- p_dma_ch->shift = GET_DMA_PW(control);
-
-#ifdef CONFIG_PPC4xx_EDMA
- p_dma_ch->pf = GET_DMA_PREFETCH(control);
-#else
- p_dma_ch->ch_enable = GET_DMA_CH(control);
- p_dma_ch->ece_enable = GET_DMA_ECE(control);
- p_dma_ch->tcd_disable = GET_DMA_TCD(control);
-#endif
- return DMA_STATUS_GOOD;
-}
-
-/*
- * Sets the priority for the DMA channel dmanr.
- * Since this is setup by the hardware init function, this function
- * can be used to dynamically change the priority of a channel.
- *
- * Acceptable priorities:
- *
- * PRIORITY_LOW
- * PRIORITY_MID_LOW
- * PRIORITY_MID_HIGH
- * PRIORITY_HIGH
- *
- */
-int
-ppc4xx_set_channel_priority(unsigned int dmanr, unsigned int priority)
-{
- unsigned int control;
-
- if (dmanr >= MAX_PPC4xx_DMA_CHANNELS) {
- printk("ppc4xx_set_channel_priority: bad channel %d\n", dmanr);
- return DMA_STATUS_BAD_CHANNEL;
- }
-
- if ((priority != PRIORITY_LOW) &&
- (priority != PRIORITY_MID_LOW) &&
- (priority != PRIORITY_MID_HIGH) && (priority != PRIORITY_HIGH)) {
- printk("ppc4xx_set_channel_priority: bad priority: 0x%x\n", priority);
- }
-
- control = mfdcr(DCRN_DMACR0 + (dmanr * 0x8));
- control |= SET_DMA_PRIORITY(priority);
- mtdcr(DCRN_DMACR0 + (dmanr * 0x8), control);
-
- return DMA_STATUS_GOOD;
-}
-
-/*
- * Returns the width of the peripheral attached to this channel. This assumes
- * that someone who knows the hardware configuration, boot code or some other
- * init code, already set the width.
- *
- * The return value is one of:
- * PW_8
- * PW_16
- * PW_32
- * PW_64
- *
- * The function returns 0 on error.
- */
-unsigned int
-ppc4xx_get_peripheral_width(unsigned int dmanr)
-{
- unsigned int control;
-
- if (dmanr >= MAX_PPC4xx_DMA_CHANNELS) {
- printk("ppc4xx_get_peripheral_width: bad channel %d\n", dmanr);
- return DMA_STATUS_BAD_CHANNEL;
- }
-
- control = mfdcr(DCRN_DMACR0 + (dmanr * 0x8));
-
- return (GET_DMA_PW(control));
-}
-
-/*
- * Clears the channel status bits
- */
-int
-ppc4xx_clr_dma_status(unsigned int dmanr)
-{
- if (dmanr >= MAX_PPC4xx_DMA_CHANNELS) {
- printk(KERN_ERR "ppc4xx_clr_dma_status: bad channel: %d\n", dmanr);
- return DMA_STATUS_BAD_CHANNEL;
- }
- mtdcr(DCRN_DMASR, ((u32)DMA_CH0_ERR | (u32)DMA_CS0 | (u32)DMA_TS0) >> dmanr);
- return DMA_STATUS_GOOD;
-}
-
-#ifdef CONFIG_PPC4xx_EDMA
-/*
- * Enables the burst on the channel (BTEN bit in the control/count register)
- * Note:
- * For scatter/gather dma, this function MUST be called before the
- * ppc4xx_alloc_dma_handle() func as the chan count register is copied into the
- * sgl list and used as each sgl element is added.
- */
-int
-ppc4xx_enable_burst(unsigned int dmanr)
-{
- unsigned int ctc;
- if (dmanr >= MAX_PPC4xx_DMA_CHANNELS) {
- printk(KERN_ERR "ppc4xx_enable_burst: bad channel: %d\n", dmanr);
- return DMA_STATUS_BAD_CHANNEL;
- }
- ctc = mfdcr(DCRN_DMACT0 + (dmanr * 0x8)) | DMA_CTC_BTEN;
- mtdcr(DCRN_DMACT0 + (dmanr * 0x8), ctc);
- return DMA_STATUS_GOOD;
-}
-/*
- * Disables the burst on the channel (BTEN bit in the control/count register)
- * Note:
- * For scatter/gather dma, this function MUST be called before the
- * ppc4xx_alloc_dma_handle() func as the chan count register is copied into the
- * sgl list and used as each sgl element is added.
- */
-int
-ppc4xx_disable_burst(unsigned int dmanr)
-{
- unsigned int ctc;
- if (dmanr >= MAX_PPC4xx_DMA_CHANNELS) {
- printk(KERN_ERR "ppc4xx_disable_burst: bad channel: %d\n", dmanr);
- return DMA_STATUS_BAD_CHANNEL;
- }
- ctc = mfdcr(DCRN_DMACT0 + (dmanr * 0x8)) &~ DMA_CTC_BTEN;
- mtdcr(DCRN_DMACT0 + (dmanr * 0x8), ctc);
- return DMA_STATUS_GOOD;
-}
-/*
- * Sets the burst size (number of peripheral widths) for the channel
- * (BSIZ bits in the control/count register))
- * must be one of:
- * DMA_CTC_BSIZ_2
- * DMA_CTC_BSIZ_4
- * DMA_CTC_BSIZ_8
- * DMA_CTC_BSIZ_16
- * Note:
- * For scatter/gather dma, this function MUST be called before the
- * ppc4xx_alloc_dma_handle() func as the chan count register is copied into the
- * sgl list and used as each sgl element is added.
- */
-int
-ppc4xx_set_burst_size(unsigned int dmanr, unsigned int bsize)
-{
- unsigned int ctc;
- if (dmanr >= MAX_PPC4xx_DMA_CHANNELS) {
- printk(KERN_ERR "ppc4xx_set_burst_size: bad channel: %d\n", dmanr);
- return DMA_STATUS_BAD_CHANNEL;
- }
- ctc = mfdcr(DCRN_DMACT0 + (dmanr * 0x8)) &~ DMA_CTC_BSIZ_MSK;
- ctc |= (bsize & DMA_CTC_BSIZ_MSK);
- mtdcr(DCRN_DMACT0 + (dmanr * 0x8), ctc);
- return DMA_STATUS_GOOD;
-}
-
-EXPORT_SYMBOL(ppc4xx_enable_burst);
-EXPORT_SYMBOL(ppc4xx_disable_burst);
-EXPORT_SYMBOL(ppc4xx_set_burst_size);
-#endif /* CONFIG_PPC4xx_EDMA */
-
-EXPORT_SYMBOL(ppc4xx_init_dma_channel);
-EXPORT_SYMBOL(ppc4xx_get_channel_config);
-EXPORT_SYMBOL(ppc4xx_set_channel_priority);
-EXPORT_SYMBOL(ppc4xx_get_peripheral_width);
-EXPORT_SYMBOL(dma_channels);
-EXPORT_SYMBOL(ppc4xx_set_src_addr);
-EXPORT_SYMBOL(ppc4xx_set_dst_addr);
-EXPORT_SYMBOL(ppc4xx_set_dma_addr);
-EXPORT_SYMBOL(ppc4xx_set_dma_addr2);
-EXPORT_SYMBOL(ppc4xx_enable_dma);
-EXPORT_SYMBOL(ppc4xx_disable_dma);
-EXPORT_SYMBOL(ppc4xx_set_dma_mode);
-EXPORT_SYMBOL(ppc4xx_set_dma_count);
-EXPORT_SYMBOL(ppc4xx_get_dma_residue);
-EXPORT_SYMBOL(ppc4xx_enable_dma_interrupt);
-EXPORT_SYMBOL(ppc4xx_disable_dma_interrupt);
-EXPORT_SYMBOL(ppc4xx_get_dma_status);
-EXPORT_SYMBOL(ppc4xx_clr_dma_status);
-