summaryrefslogtreecommitdiffstats
path: root/arch/ppc/syslib/mpc10x_common.c
diff options
context:
space:
mode:
Diffstat (limited to 'arch/ppc/syslib/mpc10x_common.c')
-rw-r--r--arch/ppc/syslib/mpc10x_common.c654
1 files changed, 0 insertions, 654 deletions
diff --git a/arch/ppc/syslib/mpc10x_common.c b/arch/ppc/syslib/mpc10x_common.c
deleted file mode 100644
index 437a294527a..00000000000
--- a/arch/ppc/syslib/mpc10x_common.c
+++ /dev/null
@@ -1,654 +0,0 @@
-/*
- * Common routines for the Motorola SPS MPC106, MPC107 and MPC8240 Host bridge,
- * Mem ctlr, EPIC, etc.
- *
- * Author: Mark A. Greer
- * mgreer@mvista.com
- *
- * 2001 (c) MontaVista, Software, Inc. This file is licensed under
- * the terms of the GNU General Public License version 2. This program
- * is licensed "as is" without any warranty of any kind, whether express
- * or implied.
- */
-
-/*
- * *** WARNING - A BAT MUST be set to access the PCI config addr/data regs ***
- */
-
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/pci.h>
-#include <linux/slab.h>
-#include <linux/serial_8250.h>
-#include <linux/fsl_devices.h>
-#include <linux/device.h>
-
-#include <asm/byteorder.h>
-#include <asm/io.h>
-#include <asm/irq.h>
-#include <asm/uaccess.h>
-#include <asm/machdep.h>
-#include <asm/pci-bridge.h>
-#include <asm/open_pic.h>
-#include <asm/mpc10x.h>
-#include <asm/ppc_sys.h>
-
-#ifdef CONFIG_MPC10X_OPENPIC
-#ifdef CONFIG_EPIC_SERIAL_MODE
-#define EPIC_IRQ_BASE (epic_serial_mode ? 16 : 5)
-#else
-#define EPIC_IRQ_BASE 5
-#endif
-#define MPC10X_I2C_IRQ (EPIC_IRQ_BASE + NUM_8259_INTERRUPTS)
-#define MPC10X_DMA0_IRQ (EPIC_IRQ_BASE + 1 + NUM_8259_INTERRUPTS)
-#define MPC10X_DMA1_IRQ (EPIC_IRQ_BASE + 2 + NUM_8259_INTERRUPTS)
-#define MPC10X_UART0_IRQ (EPIC_IRQ_BASE + 4 + NUM_8259_INTERRUPTS)
-#define MPC10X_UART1_IRQ (EPIC_IRQ_BASE + 5 + NUM_8259_INTERRUPTS)
-#else
-#define MPC10X_I2C_IRQ -1
-#define MPC10X_DMA0_IRQ -1
-#define MPC10X_DMA1_IRQ -1
-#define MPC10X_UART0_IRQ -1
-#define MPC10X_UART1_IRQ -1
-#endif
-
-static struct fsl_i2c_platform_data mpc10x_i2c_pdata = {
- .device_flags = 0,
-};
-
-static struct plat_serial8250_port serial_plat_uart0[] = {
- [0] = {
- .mapbase = 0x4500,
- .iotype = UPIO_MEM,
- .flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST,
- },
- { },
-};
-static struct plat_serial8250_port serial_plat_uart1[] = {
- [0] = {
- .mapbase = 0x4600,
- .iotype = UPIO_MEM,
- .flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST,
- },
- { },
-};
-
-struct platform_device ppc_sys_platform_devices[] = {
- [MPC10X_IIC1] = {
- .name = "fsl-i2c",
- .id = 1,
- .dev.platform_data = &mpc10x_i2c_pdata,
- .num_resources = 2,
- .resource = (struct resource[]) {
- {
- .start = MPC10X_EUMB_I2C_OFFSET,
- .end = MPC10X_EUMB_I2C_OFFSET +
- MPC10X_EUMB_I2C_SIZE - 1,
- .flags = IORESOURCE_MEM,
- },
- {
- .flags = IORESOURCE_IRQ
- },
- },
- },
- [MPC10X_DMA0] = {
- .name = "fsl-dma",
- .id = 0,
- .num_resources = 2,
- .resource = (struct resource[]) {
- {
- .start = MPC10X_EUMB_DMA_OFFSET + 0x10,
- .end = MPC10X_EUMB_DMA_OFFSET + 0x1f,
- .flags = IORESOURCE_MEM,
- },
- {
- .flags = IORESOURCE_IRQ,
- },
- },
- },
- [MPC10X_DMA1] = {
- .name = "fsl-dma",
- .id = 1,
- .num_resources = 2,
- .resource = (struct resource[]) {
- {
- .start = MPC10X_EUMB_DMA_OFFSET + 0x20,
- .end = MPC10X_EUMB_DMA_OFFSET + 0x2f,
- .flags = IORESOURCE_MEM,
- },
- {
- .flags = IORESOURCE_IRQ,
- },
- },
- },
- [MPC10X_DMA1] = {
- .name = "fsl-dma",
- .id = 1,
- .num_resources = 2,
- .resource = (struct resource[]) {
- {
- .start = MPC10X_EUMB_DMA_OFFSET + 0x20,
- .end = MPC10X_EUMB_DMA_OFFSET + 0x2f,
- .flags = IORESOURCE_MEM,
- },
- {
- .flags = IORESOURCE_IRQ,
- },
- },
- },
- [MPC10X_UART0] = {
- .name = "serial8250",
- .id = PLAT8250_DEV_PLATFORM,
- .dev.platform_data = serial_plat_uart0,
- },
- [MPC10X_UART1] = {
- .name = "serial8250",
- .id = PLAT8250_DEV_PLATFORM1,
- .dev.platform_data = serial_plat_uart1,
- },
-
-};
-
-/* We use the PCI ID to match on */
-struct ppc_sys_spec *cur_ppc_sys_spec;
-struct ppc_sys_spec ppc_sys_specs[] = {
- {
- .ppc_sys_name = "8245",
- .mask = 0xFFFFFFFF,
- .value = MPC10X_BRIDGE_8245,
- .num_devices = 5,
- .device_list = (enum ppc_sys_devices[])
- {
- MPC10X_IIC1, MPC10X_DMA0, MPC10X_DMA1, MPC10X_UART0, MPC10X_UART1,
- },
- },
- {
- .ppc_sys_name = "8240",
- .mask = 0xFFFFFFFF,
- .value = MPC10X_BRIDGE_8240,
- .num_devices = 3,
- .device_list = (enum ppc_sys_devices[])
- {
- MPC10X_IIC1, MPC10X_DMA0, MPC10X_DMA1,
- },
- },
- {
- .ppc_sys_name = "107",
- .mask = 0xFFFFFFFF,
- .value = MPC10X_BRIDGE_107,
- .num_devices = 3,
- .device_list = (enum ppc_sys_devices[])
- {
- MPC10X_IIC1, MPC10X_DMA0, MPC10X_DMA1,
- },
- },
- { /* default match */
- .ppc_sys_name = "",
- .mask = 0x00000000,
- .value = 0x00000000,
- },
-};
-
-/*
- * mach_mpc10x_fixup: This function enables DUART mode if it detects
- * if it detects two UARTS in the platform device entries.
- */
-static int __init mach_mpc10x_fixup(struct platform_device *pdev)
-{
- if (strncmp (pdev->name, "serial8250", 10) == 0 && pdev->id == 1)
- writeb(readb(serial_plat_uart1[0].membase + 0x11) | 0x1,
- serial_plat_uart1[0].membase + 0x11);
- return 0;
-}
-
-static int __init mach_mpc10x_init(void)
-{
- ppc_sys_device_fixup = mach_mpc10x_fixup;
- return 0;
-}
-postcore_initcall(mach_mpc10x_init);
-
-/* Set resources to match bridge memory map */
-void __init
-mpc10x_bridge_set_resources(int map, struct pci_controller *hose)
-{
-
- switch (map) {
- case MPC10X_MEM_MAP_A:
- pci_init_resource(&hose->io_resource,
- 0x00000000,
- 0x3f7fffff,
- IORESOURCE_IO,
- "PCI host bridge");
-
- pci_init_resource (&hose->mem_resources[0],
- 0xc0000000,
- 0xfeffffff,
- IORESOURCE_MEM,
- "PCI host bridge");
- break;
- case MPC10X_MEM_MAP_B:
- pci_init_resource(&hose->io_resource,
- 0x00000000,
- 0x00bfffff,
- IORESOURCE_IO,
- "PCI host bridge");
-
- pci_init_resource (&hose->mem_resources[0],
- 0x80000000,
- 0xfcffffff,
- IORESOURCE_MEM,
- "PCI host bridge");
- break;
- default:
- printk("mpc10x_bridge_set_resources: "
- "Invalid map specified\n");
- if (ppc_md.progress)
- ppc_md.progress("mpc10x:exit1", 0x100);
- }
-}
-
-/*
- * Do some initialization and put the EUMB registers at the specified address
- * (also map the EPIC registers into virtual space--OpenPIC_Addr will be set).
- *
- * The EPIC is not on the 106, only the 8240 and 107.
- */
-int __init
-mpc10x_bridge_init(struct pci_controller *hose,
- uint current_map,
- uint new_map,
- uint phys_eumb_base)
-{
- int host_bridge, picr1, picr1_bit, i;
- ulong pci_config_addr, pci_config_data;
- u_char pir, byte;
-
- if (ppc_md.progress) ppc_md.progress("mpc10x:enter", 0x100);
-
- /* Set up for current map so we can get at config regs */
- switch (current_map) {
- case MPC10X_MEM_MAP_A:
- setup_indirect_pci(hose,
- MPC10X_MAPA_CNFG_ADDR,
- MPC10X_MAPA_CNFG_DATA);
- break;
- case MPC10X_MEM_MAP_B:
- setup_indirect_pci(hose,
- MPC10X_MAPB_CNFG_ADDR,
- MPC10X_MAPB_CNFG_DATA);
- break;
- default:
- printk("mpc10x_bridge_init: %s\n",
- "Invalid current map specified");
- if (ppc_md.progress)
- ppc_md.progress("mpc10x:exit1", 0x100);
- return -1;
- }
-
- /* Make sure it's a supported bridge */
- early_read_config_dword(hose,
- 0,
- PCI_DEVFN(0,0),
- PCI_VENDOR_ID,
- &host_bridge);
-
- switch (host_bridge) {
- case MPC10X_BRIDGE_106:
- case MPC10X_BRIDGE_8240:
- case MPC10X_BRIDGE_107:
- case MPC10X_BRIDGE_8245:
- break;
- default:
- if (ppc_md.progress)
- ppc_md.progress("mpc10x:exit2", 0x100);
- return -1;
- }
-
- switch (new_map) {
- case MPC10X_MEM_MAP_A:
- MPC10X_SETUP_HOSE(hose, A);
- pci_config_addr = MPC10X_MAPA_CNFG_ADDR;
- pci_config_data = MPC10X_MAPA_CNFG_DATA;
- picr1_bit = MPC10X_CFG_PICR1_ADDR_MAP_A;
- break;
- case MPC10X_MEM_MAP_B:
- MPC10X_SETUP_HOSE(hose, B);
- pci_config_addr = MPC10X_MAPB_CNFG_ADDR;
- pci_config_data = MPC10X_MAPB_CNFG_DATA;
- picr1_bit = MPC10X_CFG_PICR1_ADDR_MAP_B;
- break;
- default:
- printk("mpc10x_bridge_init: %s\n",
- "Invalid new map specified");
- if (ppc_md.progress)
- ppc_md.progress("mpc10x:exit3", 0x100);
- return -1;
- }
-
- /* Make bridge use the 'new_map', if not already usng it */
- if (current_map != new_map) {
- early_read_config_dword(hose,
- 0,
- PCI_DEVFN(0,0),
- MPC10X_CFG_PICR1_REG,
- &picr1);
-
- picr1 = (picr1 & ~MPC10X_CFG_PICR1_ADDR_MAP_MASK) |
- picr1_bit;
-
- early_write_config_dword(hose,
- 0,
- PCI_DEVFN(0,0),
- MPC10X_CFG_PICR1_REG,
- picr1);
-
- asm volatile("sync");
-
- /* Undo old mappings & map in new cfg data/addr regs */
- iounmap((void *)hose->cfg_addr);
- iounmap((void *)hose->cfg_data);
-
- setup_indirect_pci(hose,
- pci_config_addr,
- pci_config_data);
- }
-
- /* Setup resources to match map */
- mpc10x_bridge_set_resources(new_map, hose);
-
- /*
- * Want processor accesses of 0xFDxxxxxx to be mapped
- * to PCI memory space at 0x00000000. Do not want
- * host bridge to respond to PCI memory accesses of
- * 0xFDxxxxxx. Do not want host bridge to respond
- * to PCI memory addresses 0xFD000000-0xFDFFFFFF;
- * want processor accesses from 0x000A0000-0x000BFFFF
- * to be forwarded to system memory.
- *
- * Only valid if not in agent mode and using MAP B.
- */
- if (new_map == MPC10X_MEM_MAP_B) {
- early_read_config_byte(hose,
- 0,
- PCI_DEVFN(0,0),
- MPC10X_CFG_MAPB_OPTIONS_REG,
- &byte);
-
- byte &= ~(MPC10X_CFG_MAPB_OPTIONS_PFAE |
- MPC10X_CFG_MAPB_OPTIONS_PCICH |
- MPC10X_CFG_MAPB_OPTIONS_PROCCH);
-
- if (host_bridge != MPC10X_BRIDGE_106) {
- byte |= MPC10X_CFG_MAPB_OPTIONS_CFAE;
- }
-
- early_write_config_byte(hose,
- 0,
- PCI_DEVFN(0,0),
- MPC10X_CFG_MAPB_OPTIONS_REG,
- byte);
- }
-
- if (host_bridge != MPC10X_BRIDGE_106) {
- early_read_config_byte(hose,
- 0,
- PCI_DEVFN(0,0),
- MPC10X_CFG_PIR_REG,
- &pir);
-
- if (pir != MPC10X_CFG_PIR_HOST_BRIDGE) {
- printk("Host bridge in Agent mode\n");
- /* Read or Set LMBAR & PCSRBAR? */
- }
-
- /* Set base addr of the 8240/107 EUMB. */
- early_write_config_dword(hose,
- 0,
- PCI_DEVFN(0,0),
- MPC10X_CFG_EUMBBAR,
- phys_eumb_base);
-#ifdef CONFIG_MPC10X_OPENPIC
- /* Map EPIC register part of EUMB into vitual memory - PCORE
- uses an i8259 instead of EPIC. */
- OpenPIC_Addr =
- ioremap(phys_eumb_base + MPC10X_EUMB_EPIC_OFFSET,
- MPC10X_EUMB_EPIC_SIZE);
-#endif
- }
-
-#ifdef CONFIG_MPC10X_STORE_GATHERING
- mpc10x_enable_store_gathering(hose);
-#else
- mpc10x_disable_store_gathering(hose);
-#endif
-
- /* setup platform devices for MPC10x bridges */
- identify_ppc_sys_by_id (host_bridge);
-
- for (i = 0; i < cur_ppc_sys_spec->num_devices; i++) {
- unsigned int dev_id = cur_ppc_sys_spec->device_list[i];
- ppc_sys_fixup_mem_resource(&ppc_sys_platform_devices[dev_id],
- phys_eumb_base);
- }
-
- /* IRQs are determined at runtime */
- ppc_sys_platform_devices[MPC10X_IIC1].resource[1].start = MPC10X_I2C_IRQ;
- ppc_sys_platform_devices[MPC10X_IIC1].resource[1].end = MPC10X_I2C_IRQ;
- ppc_sys_platform_devices[MPC10X_DMA0].resource[1].start = MPC10X_DMA0_IRQ;
- ppc_sys_platform_devices[MPC10X_DMA0].resource[1].end = MPC10X_DMA0_IRQ;
- ppc_sys_platform_devices[MPC10X_DMA1].resource[1].start = MPC10X_DMA1_IRQ;
- ppc_sys_platform_devices[MPC10X_DMA1].resource[1].end = MPC10X_DMA1_IRQ;
-
- serial_plat_uart0[0].mapbase += phys_eumb_base;
- serial_plat_uart0[0].irq = MPC10X_UART0_IRQ;
- serial_plat_uart0[0].membase = ioremap(serial_plat_uart0[0].mapbase, 0x100);
-
- serial_plat_uart1[0].mapbase += phys_eumb_base;
- serial_plat_uart1[0].irq = MPC10X_UART1_IRQ;
- serial_plat_uart1[0].membase = ioremap(serial_plat_uart1[0].mapbase, 0x100);
-
- /*
- * 8240 erratum 26, 8241/8245 erratum 29, 107 erratum 23: speculative
- * PCI reads may return stale data so turn off.
- */
- if ((host_bridge == MPC10X_BRIDGE_8240)
- || (host_bridge == MPC10X_BRIDGE_8245)
- || (host_bridge == MPC10X_BRIDGE_107)) {
-
- early_read_config_dword(hose, 0, PCI_DEVFN(0,0),
- MPC10X_CFG_PICR1_REG, &picr1);
-
- picr1 &= ~MPC10X_CFG_PICR1_SPEC_PCI_RD;
-
- early_write_config_dword(hose, 0, PCI_DEVFN(0,0),
- MPC10X_CFG_PICR1_REG, picr1);
- }
-
- /*
- * 8241/8245 erratum 28: PCI reads from local memory may return
- * stale data. Workaround by setting PICR2[0] to disable copyback
- * optimization. Oddly, the latest available user manual for the
- * 8245 (Rev 2., dated 10/2003) says PICR2[0] is reserverd.
- */
- if (host_bridge == MPC10X_BRIDGE_8245) {
- u32 picr2;
-
- early_read_config_dword(hose, 0, PCI_DEVFN(0,0),
- MPC10X_CFG_PICR2_REG, &picr2);
-
- picr2 |= MPC10X_CFG_PICR2_COPYBACK_OPT;
-
- early_write_config_dword(hose, 0, PCI_DEVFN(0,0),
- MPC10X_CFG_PICR2_REG, picr2);
- }
-
- if (ppc_md.progress) ppc_md.progress("mpc10x:exit", 0x100);
- return 0;
-}
-
-/*
- * Need to make our own PCI config space access macros because
- * mpc10x_get_mem_size() is called before the data structures are set up for
- * the 'early_xxx' and 'indirect_xxx' routines to work.
- * Assumes bus 0.
- */
-#define MPC10X_CFG_read(val, addr, type, op) *val = op((type)(addr))
-#define MPC10X_CFG_write(val, addr, type, op) op((type *)(addr), (val))
-
-#define MPC10X_PCI_OP(rw, size, type, op, mask) \
-static void \
-mpc10x_##rw##_config_##size(uint *cfg_addr, uint *cfg_data, int devfn, int offset, type val) \
-{ \
- out_be32(cfg_addr, \
- ((offset & 0xfc) << 24) | (devfn << 16) \
- | (0 << 8) | 0x80); \
- MPC10X_CFG_##rw(val, cfg_data + (offset & mask), type, op); \
- return; \
-}
-
-MPC10X_PCI_OP(read, byte, u8 *, in_8, 3)
-MPC10X_PCI_OP(read, dword, u32 *, in_le32, 0)
-#if 0 /* Not used */
-MPC10X_PCI_OP(write, byte, u8, out_8, 3)
-MPC10X_PCI_OP(read, word, u16 *, in_le16, 2)
-MPC10X_PCI_OP(write, word, u16, out_le16, 2)
-MPC10X_PCI_OP(write, dword, u32, out_le32, 0)
-#endif
-
-/*
- * Read the memory controller registers to determine the amount of memory in
- * the system. This assumes that the firmware has correctly set up the memory
- * controller registers.
- */
-unsigned long __init
-mpc10x_get_mem_size(uint mem_map)
-{
- uint *config_addr, *config_data, val;
- ulong start, end, total, offset;
- int i;
- u_char bank_enables;
-
- switch (mem_map) {
- case MPC10X_MEM_MAP_A:
- config_addr = (uint *)MPC10X_MAPA_CNFG_ADDR;
- config_data = (uint *)MPC10X_MAPA_CNFG_DATA;
- break;
- case MPC10X_MEM_MAP_B:
- config_addr = (uint *)MPC10X_MAPB_CNFG_ADDR;
- config_data = (uint *)MPC10X_MAPB_CNFG_DATA;
- break;
- default:
- return 0;
- }
-
- mpc10x_read_config_byte(config_addr,
- config_data,
- PCI_DEVFN(0,0),
- MPC10X_MCTLR_MEM_BANK_ENABLES,
- &bank_enables);
-
- total = 0;
-
- for (i=0; i<8; i++) {
- if (bank_enables & (1 << i)) {
- offset = MPC10X_MCTLR_MEM_START_1 + ((i > 3) ? 4 : 0);
- mpc10x_read_config_dword(config_addr,
- config_data,
- PCI_DEVFN(0,0),
- offset,
- &val);
- start = (val >> ((i & 3) << 3)) & 0xff;
-
- offset = MPC10X_MCTLR_EXT_MEM_START_1 + ((i>3) ? 4 : 0);
- mpc10x_read_config_dword(config_addr,
- config_data,
- PCI_DEVFN(0,0),
- offset,
- &val);
- val = (val >> ((i & 3) << 3)) & 0x03;
- start = (val << 28) | (start << 20);
-
- offset = MPC10X_MCTLR_MEM_END_1 + ((i > 3) ? 4 : 0);
- mpc10x_read_config_dword(config_addr,
- config_data,
- PCI_DEVFN(0,0),
- offset,
- &val);
- end = (val >> ((i & 3) << 3)) & 0xff;
-
- offset = MPC10X_MCTLR_EXT_MEM_END_1 + ((i > 3) ? 4 : 0);
- mpc10x_read_config_dword(config_addr,
- config_data,
- PCI_DEVFN(0,0),
- offset,
- &val);
- val = (val >> ((i & 3) << 3)) & 0x03;
- end = (val << 28) | (end << 20) | 0xfffff;
-
- total += (end - start + 1);
- }
- }
-
- return total;
-}
-
-int __init
-mpc10x_enable_store_gathering(struct pci_controller *hose)
-{
- uint picr1;
-
- early_read_config_dword(hose,
- 0,
- PCI_DEVFN(0,0),
- MPC10X_CFG_PICR1_REG,
- &picr1);
-
- picr1 |= MPC10X_CFG_PICR1_ST_GATH_EN;
-
- early_write_config_dword(hose,
- 0,
- PCI_DEVFN(0,0),
- MPC10X_CFG_PICR1_REG,
- picr1);
-
- return 0;
-}
-
-int __init
-mpc10x_disable_store_gathering(struct pci_controller *hose)
-{
- uint picr1;
-
- early_read_config_dword(hose,
- 0,
- PCI_DEVFN(0,0),
- MPC10X_CFG_PICR1_REG,
- &picr1);
-
- picr1 &= ~MPC10X_CFG_PICR1_ST_GATH_EN;
-
- early_write_config_dword(hose,
- 0,
- PCI_DEVFN(0,0),
- MPC10X_CFG_PICR1_REG,
- picr1);
-
- return 0;
-}
-
-#ifdef CONFIG_MPC10X_OPENPIC
-void __init mpc10x_set_openpic(void)
-{
- /* Map external IRQs */
- openpic_set_sources(0, EPIC_IRQ_BASE, OpenPIC_Addr + 0x10200);
- /* Skip reserved space and map i2c and DMA Ch[01] */
- openpic_set_sources(EPIC_IRQ_BASE, 3, OpenPIC_Addr + 0x11020);
- /* Skip reserved space and map Message Unit Interrupt (I2O) */
- openpic_set_sources(EPIC_IRQ_BASE + 3, 1, OpenPIC_Addr + 0x110C0);
- /* Skip reserved space and map Serial Interrupts */
- openpic_set_sources(EPIC_IRQ_BASE + 4, 2, OpenPIC_Addr + 0x11120);
-
- openpic_init(NUM_8259_INTERRUPTS);
-}
-#endif