summaryrefslogtreecommitdiffstats
path: root/arch/ppc/platforms/rpx8260.h
diff options
context:
space:
mode:
Diffstat (limited to 'arch/ppc/platforms/rpx8260.h')
-rw-r--r--arch/ppc/platforms/rpx8260.h81
1 files changed, 0 insertions, 81 deletions
diff --git a/arch/ppc/platforms/rpx8260.h b/arch/ppc/platforms/rpx8260.h
deleted file mode 100644
index 843494a50ef..00000000000
--- a/arch/ppc/platforms/rpx8260.h
+++ /dev/null
@@ -1,81 +0,0 @@
-/*
- * A collection of structures, addresses, and values associated with
- * the Embedded Planet RPX6 (or RPX Super) MPC8260 board.
- * Copied from the RPX-Classic and SBS8260 stuff.
- *
- * Copyright (c) 2001 Dan Malek <dan@embeddededge.com>
- */
-#ifdef __KERNEL__
-#ifndef __ASM_PLATFORMS_RPX8260_H__
-#define __ASM_PLATFORMS_RPX8260_H__
-
-/* A Board Information structure that is given to a program when
- * prom starts it up.
- */
-typedef struct bd_info {
- unsigned int bi_memstart; /* Memory start address */
- unsigned int bi_memsize; /* Memory (end) size in bytes */
- unsigned int bi_nvsize; /* NVRAM size in bytes (can be 0) */
- unsigned int bi_intfreq; /* Internal Freq, in Hz */
- unsigned int bi_busfreq; /* Bus Freq, in MHz */
- unsigned int bi_cpmfreq; /* CPM Freq, in MHz */
- unsigned int bi_brgfreq; /* BRG Freq, in MHz */
- unsigned int bi_vco; /* VCO Out from PLL */
- unsigned int bi_baudrate; /* Default console baud rate */
- unsigned int bi_immr; /* IMMR when called from boot rom */
- unsigned char bi_enetaddr[6];
-} bd_t;
-
-extern bd_t m8xx_board_info;
-
-/* Memory map is configured by the PROM startup.
- * We just map a few things we need. The CSR is actually 4 byte-wide
- * registers that can be accessed as 8-, 16-, or 32-bit values.
- */
-#define CPM_MAP_ADDR ((uint)0xf0000000)
-#define RPX_CSR_ADDR ((uint)0xfa000000)
-#define RPX_CSR_SIZE ((uint)(512 * 1024))
-#define RPX_NVRTC_ADDR ((uint)0xfa080000)
-#define RPX_NVRTC_SIZE ((uint)(512 * 1024))
-
-/* The RPX6 has 16, byte wide control/status registers.
- * Not all are used (yet).
- */
-extern volatile u_char *rpx6_csr_addr;
-
-/* Things of interest in the CSR.
-*/
-#define BCSR0_ID_MASK ((u_char)0xf0) /* Read only */
-#define BCSR0_SWITCH_MASK ((u_char)0x0f) /* Read only */
-#define BCSR1_XCVR_SMC1 ((u_char)0x80)
-#define BCSR1_XCVR_SMC2 ((u_char)0x40)
-#define BCSR2_FLASH_WENABLE ((u_char)0x20)
-#define BCSR2_NVRAM_ENABLE ((u_char)0x10)
-#define BCSR2_ALT_IRQ2 ((u_char)0x08)
-#define BCSR2_ALT_IRQ3 ((u_char)0x04)
-#define BCSR2_PRST ((u_char)0x02) /* Force reset */
-#define BCSR2_ENPRST ((u_char)0x01) /* Enable POR */
-#define BCSR3_MODCLK_MASK ((u_char)0xe0)
-#define BCSR3_ENCLKHDR ((u_char)0x10)
-#define BCSR3_LED5 ((u_char)0x04) /* 0 == on */
-#define BCSR3_LED6 ((u_char)0x02) /* 0 == on */
-#define BCSR3_LED7 ((u_char)0x01) /* 0 == on */
-#define BCSR4_EN_PHY ((u_char)0x80) /* Enable PHY */
-#define BCSR4_EN_MII ((u_char)0x40) /* Enable PHY */
-#define BCSR4_MII_READ ((u_char)0x04)
-#define BCSR4_MII_MDC ((u_char)0x02)
-#define BCSR4_MII_MDIO ((u_char)0x01)
-#define BCSR13_FETH_IRQMASK ((u_char)0xf0)
-#define BCSR15_FETH_IRQ ((u_char)0x20)
-
-#define PHY_INTERRUPT SIU_INT_IRQ7
-
-/* For our show_cpuinfo hooks. */
-#define CPUINFO_VENDOR "Embedded Planet"
-#define CPUINFO_MACHINE "EP8260 PowerPC"
-
-/* Warm reset vector. */
-#define BOOTROM_RESTART_ADDR ((uint)0xfff00104)
-
-#endif /* __ASM_PLATFORMS_RPX8260_H__ */
-#endif /* __KERNEL__ */