summaryrefslogtreecommitdiffstats
path: root/arch/ppc/boot/simple/head.S
diff options
context:
space:
mode:
Diffstat (limited to 'arch/ppc/boot/simple/head.S')
-rw-r--r--arch/ppc/boot/simple/head.S137
1 files changed, 0 insertions, 137 deletions
diff --git a/arch/ppc/boot/simple/head.S b/arch/ppc/boot/simple/head.S
deleted file mode 100644
index 1b4d7b1d4ec..00000000000
--- a/arch/ppc/boot/simple/head.S
+++ /dev/null
@@ -1,137 +0,0 @@
-/*
- * Initial board bringup code for many different boards.
- *
- * Author: Tom Rini
- * trini@mvista.com
- * Derived from arch/ppc/boot/prep/head.S (Cort Dougan, many others).
- *
- * 2001-2004 (c) MontaVista, Software, Inc. This file is licensed under
- * the terms of the GNU General Public License version 2. This program
- * is licensed "as is" without any warranty of any kind, whether express
- * or implied.
- */
-
-#include <asm/reg.h>
-#include <asm/cache.h>
-#include <asm/ppc_asm.h>
-
- .text
-
-/*
- * Begin at some arbitrary location in RAM or Flash
- * Initialize core registers
- * Configure memory controller (Not executing from RAM)
- * Move the boot code to the link address (8M)
- * Setup C stack
- * Initialize UART
- * Decompress the kernel to 0x0
- * Jump to the kernel entry
- *
- */
-
- .globl start
-start:
- bl start_
-#ifdef CONFIG_IBM_OPENBIOS
- /* The IBM "Tree" bootrom knows that the address of the bootrom
- * read only structure is 4 bytes after _start.
- */
- .long 0x62726f6d # structure ID - "brom"
- .long 0x5f726f00 # - "_ro\0"
- .long 1 # structure version
- .long bootrom_cmdline # address of *bootrom_cmdline
-#endif
-
-start_:
-#ifdef CONFIG_FORCE
- /* We have some really bad firmware. We must disable the L1
- * icache/dcache now or the board won't boot.
- */
- li r4,0x0000
- isync
- mtspr SPRN_HID0,r4
- sync
- isync
-#endif
-
-#if defined(CONFIG_MBX) || defined(CONFIG_RPX8260) || defined(CONFIG_PPC_PREP)
- mr r29,r3 /* On the MBX860, r3 is the board info pointer.
- * On the RPXSUPER, r3 points to the NVRAM
- * configuration keys.
- * On PReP, r3 is the pointer to the residual data.
- */
-#endif
-
-#if defined(CONFIG_XILINX_VIRTEX_4_FX)
- /* PPC errata 213: only for Virtex-4 FX */
- mfccr0 0
- oris 0,0,0x50000000@h
- mtccr0 0
-#endif
-
- mflr r3 /* Save our actual starting address. */
-
- /* The following functions we call must not modify r3 or r4.....
- */
-#ifdef CONFIG_6xx
- /* On PReP we must look at the OpenFirmware pointer and sanity
- * test it. On other platforms, we disable the MMU right now
- * and other bits.
- */
-#ifdef CONFIG_PPC_PREP
-/*
- * Save the OF pointer to r25, but only if the entry point is in a sane
- * location; if not we store 0. If there is no entry point, or it is
- * invalid, we establish the default MSR value immediately. Otherwise,
- * we defer doing that, to allow OF functions to be called, until we
- * begin uncompressing the kernel.
- */
- lis r8,0x0fff /* r8 = 0x0fffffff */
- ori r8,r8,0xffff
-
- subc r8,r8,r5 /* r8 = (r5 <= r8) ? ~0 : 0 */
- subfe r8,r8,r8
- nand r8,r8,r8
-
- and. r5,r5,r8 /* r5 will be cleared if (r5 > r8) */
- bne+ haveOF
-
- li r8,MSR_IP|MSR_FP /* Not OF: set MSR immediately */
- mtmsr r8
- isync
-haveOF:
- mr r25,r5
-#else
- bl disable_6xx_mmu
-#endif
- bl disable_6xx_l1cache
-
- CLEAR_CACHES
-#endif
-
-#ifdef CONFIG_8xx
- mfmsr r8 /* Turn off interrupts */
- li r9,0
- ori r9,r9,MSR_EE
- andc r8,r8,r9
- mtmsr r8
-
- /* We do this because some boot roms don't initialize the
- * processor correctly. Don't do this if you want to debug
- * using a BDM device.
- */
- li r4,0 /* Zero DER to prevent FRZ */
- mtspr SPRN_DER,r4
-#endif
-
-#if defined(CONFIG_MBX) || defined(CONFIG_RPX8260) || defined(CONFIG_PPC_PREP)
- mr r4,r29 /* put the board info pointer where the relocate
- * routine will find it
- */
-#endif
-
- /* Get the load address.
- */
- subi r3, r3, 4 /* Get the actual IP, not NIP */
- b relocate
-