summaryrefslogtreecommitdiffstats
path: root/arch/powerpc
diff options
context:
space:
mode:
Diffstat (limited to 'arch/powerpc')
-rw-r--r--arch/powerpc/Kconfig6
-rw-r--r--arch/powerpc/Makefile4
-rw-r--r--arch/powerpc/configs/cell_defconfig40
-rw-r--r--arch/powerpc/configs/g5_defconfig58
-rw-r--r--arch/powerpc/configs/iseries_defconfig43
-rw-r--r--arch/powerpc/configs/pseries_defconfig54
-rw-r--r--arch/powerpc/kernel/Makefile2
-rw-r--r--arch/powerpc/kernel/asm-offsets.c1
-rw-r--r--arch/powerpc/kernel/cputable.c16
-rw-r--r--arch/powerpc/kernel/entry_32.S35
-rw-r--r--arch/powerpc/kernel/head_64.S49
-rw-r--r--arch/powerpc/kernel/idle.c4
-rw-r--r--arch/powerpc/kernel/idle_6xx.S63
-rw-r--r--arch/powerpc/kernel/idle_power4.S10
-rw-r--r--arch/powerpc/kernel/iommu.c36
-rw-r--r--arch/powerpc/kernel/irq.c36
-rw-r--r--arch/powerpc/kernel/kprobes.c28
-rw-r--r--arch/powerpc/kernel/module_64.c16
-rw-r--r--arch/powerpc/kernel/pci_iommu.c40
-rw-r--r--arch/powerpc/kernel/ppc_ksyms.c1
-rw-r--r--arch/powerpc/kernel/prom.c72
-rw-r--r--arch/powerpc/kernel/prom_init.c165
-rw-r--r--arch/powerpc/kernel/ptrace.c5
-rw-r--r--arch/powerpc/kernel/rtas-proc.c4
-rw-r--r--arch/powerpc/kernel/setup-common.c8
-rw-r--r--arch/powerpc/kernel/setup_64.c8
-rw-r--r--arch/powerpc/kernel/sysfs.c22
-rw-r--r--arch/powerpc/kernel/systbl.S22
-rw-r--r--arch/powerpc/kernel/vio.c6
-rw-r--r--arch/powerpc/mm/hugetlbpage.c295
-rw-r--r--arch/powerpc/mm/init_64.c7
-rw-r--r--arch/powerpc/mm/numa.c32
-rw-r--r--arch/powerpc/platforms/cell/Kconfig3
-rw-r--r--arch/powerpc/platforms/cell/setup.c78
-rw-r--r--arch/powerpc/platforms/cell/spu_base.c101
-rw-r--r--arch/powerpc/platforms/cell/spu_callbacks.c26
-rw-r--r--arch/powerpc/platforms/cell/spufs/switch.c2
-rw-r--r--arch/powerpc/platforms/chrp/chrp.h1
-rw-r--r--arch/powerpc/platforms/chrp/pci.c6
-rw-r--r--arch/powerpc/platforms/chrp/setup.c44
-rw-r--r--arch/powerpc/platforms/iseries/setup.c7
-rw-r--r--arch/powerpc/platforms/powermac/low_i2c.c90
-rw-r--r--arch/powerpc/platforms/powermac/pci.c2
-rw-r--r--arch/powerpc/platforms/powermac/pfunc_core.c18
-rw-r--r--arch/powerpc/platforms/powermac/setup.c12
-rw-r--r--arch/powerpc/platforms/pseries/eeh.c6
-rw-r--r--arch/powerpc/platforms/pseries/eeh_event.c8
-rw-r--r--arch/powerpc/platforms/pseries/rtasd.c2
-rw-r--r--arch/powerpc/platforms/pseries/setup.c2
-rw-r--r--arch/powerpc/sysdev/dart_iommu.c12
50 files changed, 1143 insertions, 465 deletions
diff --git a/arch/powerpc/Kconfig b/arch/powerpc/Kconfig
index 167e70e9555..6729c98b66f 100644
--- a/arch/powerpc/Kconfig
+++ b/arch/powerpc/Kconfig
@@ -366,6 +366,7 @@ config PPC_PMAC64
select U3_DART
select MPIC_BROKEN_U3
select GENERIC_TBSYNC
+ select PPC_970_NAP
default y
config PPC_PREP
@@ -383,6 +384,7 @@ config PPC_MAPLE
select MPIC_BROKEN_U3
select GENERIC_TBSYNC
select PPC_UDBG_16550
+ select PPC_970_NAP
default n
help
This option enables support for the Maple 970FX Evaluation Board.
@@ -457,6 +459,10 @@ config PPC_MPC106
bool
default n
+config PPC_970_NAP
+ bool
+ default n
+
source "drivers/cpufreq/Kconfig"
config CPU_FREQ_PMAC
diff --git a/arch/powerpc/Makefile b/arch/powerpc/Makefile
index 6ec84d37a33..ed5b26aa8be 100644
--- a/arch/powerpc/Makefile
+++ b/arch/powerpc/Makefile
@@ -104,6 +104,10 @@ ifndef CONFIG_FSL_BOOKE
CFLAGS += -mstring
endif
+ifeq ($(CONFIG_6xx),y)
+CFLAGS += -mcpu=powerpc
+endif
+
cpu-as-$(CONFIG_PPC64BRIDGE) += -Wa,-mppc64bridge
cpu-as-$(CONFIG_4xx) += -Wa,-m405
cpu-as-$(CONFIG_6xx) += -Wa,-maltivec
diff --git a/arch/powerpc/configs/cell_defconfig b/arch/powerpc/configs/cell_defconfig
index fe22e54ab2b..dbe421dc3c1 100644
--- a/arch/powerpc/configs/cell_defconfig
+++ b/arch/powerpc/configs/cell_defconfig
@@ -9,6 +9,7 @@ CONFIG_PPC_MERGE=y
CONFIG_MMU=y
CONFIG_GENERIC_HARDIRQS=y
CONFIG_RWSEM_XCHGADD_ALGORITHM=y
+CONFIG_GENERIC_HWEIGHT=y
CONFIG_GENERIC_CALIBRATE_DELAY=y
CONFIG_PPC=y
CONFIG_EARLY_PRINTK=y
@@ -55,6 +56,7 @@ CONFIG_SYSCTL=y
CONFIG_IKCONFIG=y
CONFIG_IKCONFIG_PROC=y
# CONFIG_CPUSETS is not set
+# CONFIG_RELAY is not set
CONFIG_INITRAMFS_SOURCE=""
CONFIG_CC_OPTIMIZE_FOR_SIZE=y
# CONFIG_EMBEDDED is not set
@@ -69,10 +71,6 @@ CONFIG_BASE_FULL=y
CONFIG_FUTEX=y
CONFIG_EPOLL=y
CONFIG_SHMEM=y
-CONFIG_CC_ALIGN_FUNCTIONS=0
-CONFIG_CC_ALIGN_LABELS=0
-CONFIG_CC_ALIGN_LOOPS=0
-CONFIG_CC_ALIGN_JUMPS=0
CONFIG_SLAB=y
# CONFIG_TINY_SHMEM is not set
CONFIG_BASE_SMALL=0
@@ -84,7 +82,6 @@ CONFIG_BASE_SMALL=0
CONFIG_MODULES=y
CONFIG_MODULE_UNLOAD=y
# CONFIG_MODULE_FORCE_UNLOAD is not set
-CONFIG_OBSOLETE_MODPARM=y
# CONFIG_MODVERSIONS is not set
# CONFIG_MODULE_SRCVERSION_ALL is not set
CONFIG_KMOD=y
@@ -93,6 +90,7 @@ CONFIG_STOP_MACHINE=y
#
# Block layer
#
+# CONFIG_BLK_DEV_IO_TRACE is not set
#
# IO Schedulers
@@ -126,6 +124,7 @@ CONFIG_RTAS_FLASH=y
CONFIG_MMIO_NVRAM=y
CONFIG_CELL_IIC=y
# CONFIG_PPC_MPC106 is not set
+# CONFIG_PPC_970_NAP is not set
# CONFIG_CPU_FREQ is not set
# CONFIG_WANT_EARLY_SERIAL is not set
@@ -167,7 +166,6 @@ CONFIG_HAVE_MEMORY_PRESENT=y
CONFIG_SPARSEMEM_EXTREME=y
# CONFIG_MEMORY_HOTPLUG is not set
CONFIG_SPLIT_PTLOCK_CPUS=4
-CONFIG_MIGRATION=y
# CONFIG_PPC_64K_PAGES is not set
CONFIG_SCHED_SMT=y
CONFIG_PROC_DEVICETREE=y
@@ -184,7 +182,6 @@ CONFIG_GENERIC_ISA_DMA=y
# CONFIG_PPC_INDIRECT_PCI is not set
CONFIG_PCI=y
CONFIG_PCI_DOMAINS=y
-CONFIG_PCI_LEGACY_PROC=y
# CONFIG_PCI_DEBUG is not set
#
@@ -226,6 +223,7 @@ CONFIG_SYN_COOKIES=y
# CONFIG_INET_AH is not set
# CONFIG_INET_ESP is not set
# CONFIG_INET_IPCOMP is not set
+# CONFIG_INET_XFRM_TUNNEL is not set
CONFIG_INET_TUNNEL=y
CONFIG_INET_DIAG=y
CONFIG_INET_TCP_DIAG=y
@@ -242,6 +240,7 @@ CONFIG_IPV6=y
CONFIG_INET6_AH=m
CONFIG_INET6_ESP=m
CONFIG_INET6_IPCOMP=m
+CONFIG_INET6_XFRM_TUNNEL=m
CONFIG_INET6_TUNNEL=m
CONFIG_IPV6_TUNNEL=m
CONFIG_NETFILTER=y
@@ -632,6 +631,7 @@ CONFIG_SERIAL_NONSTANDARD=y
#
CONFIG_SERIAL_8250=y
CONFIG_SERIAL_8250_CONSOLE=y
+CONFIG_SERIAL_8250_PCI=y
CONFIG_SERIAL_8250_NR_UARTS=4
CONFIG_SERIAL_8250_RUNTIME_UARTS=4
# CONFIG_SERIAL_8250_EXTENDED is not set
@@ -717,7 +717,6 @@ CONFIG_I2C_ALGOBIT=y
# CONFIG_I2C_PARPORT_LIGHT is not set
# CONFIG_I2C_PROSAVAGE is not set
# CONFIG_I2C_SAVAGE4 is not set
-# CONFIG_SCx200_ACB is not set
# CONFIG_I2C_SIS5595 is not set
# CONFIG_I2C_SIS630 is not set
# CONFIG_I2C_SIS96X is not set
@@ -736,9 +735,7 @@ CONFIG_I2C_ALGOBIT=y
# CONFIG_SENSORS_PCF8574 is not set
# CONFIG_SENSORS_PCA9539 is not set
# CONFIG_SENSORS_PCF8591 is not set
-# CONFIG_SENSORS_RTC8564 is not set
# CONFIG_SENSORS_MAX6875 is not set
-# CONFIG_RTC_X1205_I2C is not set
# CONFIG_I2C_DEBUG_CORE is not set
# CONFIG_I2C_DEBUG_ALGO is not set
# CONFIG_I2C_DEBUG_BUS is not set
@@ -766,10 +763,6 @@ CONFIG_I2C_ALGOBIT=y
#
#
-# Multimedia Capabilities Port drivers
-#
-
-#
# Multimedia devices
#
# CONFIG_VIDEO_DEV is not set
@@ -818,6 +811,19 @@ CONFIG_USB_ARCH_HAS_EHCI=y
# CONFIG_MMC is not set
#
+# LED devices
+#
+# CONFIG_NEW_LEDS is not set
+
+#
+# LED drivers
+#
+
+#
+# LED Triggers
+#
+
+#
# InfiniBand support
#
CONFIG_INFINIBAND=y
@@ -834,6 +840,11 @@ CONFIG_INFINIBAND_IPOIB_DEBUG_DATA=y
#
#
+# Real Time Clock
+#
+# CONFIG_RTC_CLASS is not set
+
+#
# File systems
#
CONFIG_EXT2_FS=y
@@ -889,7 +900,6 @@ CONFIG_TMPFS=y
CONFIG_HUGETLBFS=y
CONFIG_HUGETLB_PAGE=y
CONFIG_RAMFS=y
-# CONFIG_RELAYFS_FS is not set
# CONFIG_CONFIGFS_FS is not set
#
diff --git a/arch/powerpc/configs/g5_defconfig b/arch/powerpc/configs/g5_defconfig
index 2c3fd200767..a45627547d0 100644
--- a/arch/powerpc/configs/g5_defconfig
+++ b/arch/powerpc/configs/g5_defconfig
@@ -1,7 +1,7 @@
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.16-rc2
-# Fri Feb 10 17:33:08 2006
+# Linux kernel version: 2.6.17-rc1
+# Wed Apr 19 13:24:37 2006
#
CONFIG_PPC64=y
CONFIG_64BIT=y
@@ -9,6 +9,7 @@ CONFIG_PPC_MERGE=y
CONFIG_MMU=y
CONFIG_GENERIC_HARDIRQS=y
CONFIG_RWSEM_XCHGADD_ALGORITHM=y
+CONFIG_GENERIC_HWEIGHT=y
CONFIG_GENERIC_CALIBRATE_DELAY=y
CONFIG_PPC=y
CONFIG_EARLY_PRINTK=y
@@ -29,6 +30,7 @@ CONFIG_POWER4=y
CONFIG_PPC_FPU=y
CONFIG_ALTIVEC=y
CONFIG_PPC_STD_MMU=y
+CONFIG_VIRT_CPU_ACCOUNTING=y
CONFIG_SMP=y
CONFIG_NR_CPUS=4
@@ -53,6 +55,7 @@ CONFIG_SYSCTL=y
CONFIG_IKCONFIG=y
CONFIG_IKCONFIG_PROC=y
# CONFIG_CPUSETS is not set
+# CONFIG_RELAY is not set
CONFIG_INITRAMFS_SOURCE=""
CONFIG_CC_OPTIMIZE_FOR_SIZE=y
# CONFIG_EMBEDDED is not set
@@ -67,10 +70,6 @@ CONFIG_BASE_FULL=y
CONFIG_FUTEX=y
CONFIG_EPOLL=y
CONFIG_SHMEM=y
-CONFIG_CC_ALIGN_FUNCTIONS=0
-CONFIG_CC_ALIGN_LABELS=0
-CONFIG_CC_ALIGN_LOOPS=0
-CONFIG_CC_ALIGN_JUMPS=0
CONFIG_SLAB=y
# CONFIG_TINY_SHMEM is not set
CONFIG_BASE_SMALL=0
@@ -82,7 +81,6 @@ CONFIG_BASE_SMALL=0
CONFIG_MODULES=y
CONFIG_MODULE_UNLOAD=y
# CONFIG_MODULE_FORCE_UNLOAD is not set
-CONFIG_OBSOLETE_MODPARM=y
CONFIG_MODVERSIONS=y
CONFIG_MODULE_SRCVERSION_ALL=y
CONFIG_KMOD=y
@@ -91,6 +89,7 @@ CONFIG_STOP_MACHINE=y
#
# Block layer
#
+# CONFIG_BLK_DEV_IO_TRACE is not set
#
# IO Schedulers
@@ -185,7 +184,6 @@ CONFIG_GENERIC_ISA_DMA=y
# CONFIG_PPC_INDIRECT_PCI is not set
CONFIG_PCI=y
CONFIG_PCI_DOMAINS=y
-CONFIG_PCI_LEGACY_PROC=y
# CONFIG_PCI_DEBUG is not set
#
@@ -227,6 +225,7 @@ CONFIG_SYN_COOKIES=y
CONFIG_INET_AH=m
CONFIG_INET_ESP=m
CONFIG_INET_IPCOMP=m
+CONFIG_INET_XFRM_TUNNEL=m
CONFIG_INET_TUNNEL=y
CONFIG_INET_DIAG=y
CONFIG_INET_TCP_DIAG=y
@@ -238,6 +237,8 @@ CONFIG_TCP_CONG_BIC=y
#
# CONFIG_IP_VS is not set
# CONFIG_IPV6 is not set
+# CONFIG_INET6_XFRM_TUNNEL is not set
+# CONFIG_INET6_TUNNEL is not set
CONFIG_NETFILTER=y
# CONFIG_NETFILTER_DEBUG is not set
@@ -261,6 +262,7 @@ CONFIG_IP_NF_IRC=m
CONFIG_IP_NF_TFTP=m
CONFIG_IP_NF_AMANDA=m
# CONFIG_IP_NF_PPTP is not set
+# CONFIG_IP_NF_H323 is not set
CONFIG_IP_NF_QUEUE=m
#
@@ -513,6 +515,7 @@ CONFIG_MD_RAID0=y
CONFIG_MD_RAID1=y
CONFIG_MD_RAID10=m
CONFIG_MD_RAID5=y
+# CONFIG_MD_RAID5_RESHAPE is not set
CONFIG_MD_RAID6=m
CONFIG_MD_MULTIPATH=m
CONFIG_MD_FAULTY=m
@@ -761,7 +764,6 @@ CONFIG_LEGACY_PTY_COUNT=256
# Watchdog Cards
#
# CONFIG_WATCHDOG is not set
-# CONFIG_RTC is not set
CONFIG_GEN_RTC=y
# CONFIG_GEN_RTC_X is not set
# CONFIG_DTLK is not set
@@ -772,6 +774,7 @@ CONFIG_GEN_RTC=y
# Ftape, the floppy tape device driver
#
CONFIG_AGP=m
+# CONFIG_AGP_VIA is not set
CONFIG_AGP_UNINORTH=m
# CONFIG_DRM is not set
CONFIG_RAW_DRIVER=y
@@ -813,7 +816,6 @@ CONFIG_I2C_POWERMAC=y
# CONFIG_I2C_PARPORT_LIGHT is not set
# CONFIG_I2C_PROSAVAGE is not set
# CONFIG_I2C_SAVAGE4 is not set
-# CONFIG_SCx200_ACB is not set
# CONFIG_I2C_SIS5595 is not set
# CONFIG_I2C_SIS630 is not set
# CONFIG_I2C_SIS96X is not set
@@ -832,9 +834,7 @@ CONFIG_I2C_POWERMAC=y
# CONFIG_SENSORS_PCF8574 is not set
# CONFIG_SENSORS_PCA9539 is not set
# CONFIG_SENSORS_PCF8591 is not set
-# CONFIG_SENSORS_RTC8564 is not set
# CONFIG_SENSORS_MAX6875 is not set
-# CONFIG_RTC_X1205_I2C is not set
# CONFIG_I2C_DEBUG_CORE is not set
# CONFIG_I2C_DEBUG_ALGO is not set
# CONFIG_I2C_DEBUG_BUS is not set
@@ -862,10 +862,6 @@ CONFIG_I2C_POWERMAC=y
#
#
-# Multimedia Capabilities Port drivers
-#
-
-#
# Multimedia devices
#
# CONFIG_VIDEO_DEV is not set
@@ -874,6 +870,7 @@ CONFIG_I2C_POWERMAC=y
# Digital Video Broadcasting Devices
#
# CONFIG_DVB is not set
+# CONFIG_USB_DABUSB is not set
#
# Graphics support
@@ -883,6 +880,7 @@ CONFIG_FB_CFB_FILLRECT=y
CONFIG_FB_CFB_COPYAREA=y
CONFIG_FB_CFB_IMAGEBLIT=y
CONFIG_FB_MACMODES=y
+CONFIG_FB_FIRMWARE_EDID=y
CONFIG_FB_MODE_HELPERS=y
CONFIG_FB_TILEBLITTING=y
# CONFIG_FB_CIRRUS is not set
@@ -901,7 +899,6 @@ CONFIG_FB_NVIDIA=y
CONFIG_FB_NVIDIA_I2C=y
# CONFIG_FB_RIVA is not set
# CONFIG_FB_MATROX is not set
-# CONFIG_FB_RADEON_OLD is not set
CONFIG_FB_RADEON=y
CONFIG_FB_RADEON_I2C=y
# CONFIG_FB_RADEON_DEBUG is not set
@@ -958,9 +955,11 @@ CONFIG_SND_SEQUENCER=m
CONFIG_SND_OSSEMUL=y
CONFIG_SND_MIXER_OSS=m
CONFIG_SND_PCM_OSS=m
+CONFIG_SND_PCM_OSS_PLUGINS=y
CONFIG_SND_SEQUENCER_OSS=y
# CONFIG_SND_DYNAMIC_MINORS is not set
CONFIG_SND_SUPPORT_OLD_API=y
+CONFIG_SND_VERBOSE_PROCFS=y
# CONFIG_SND_VERBOSE_PRINTK is not set
# CONFIG_SND_DEBUG is not set
@@ -977,6 +976,7 @@ CONFIG_SND_SUPPORT_OLD_API=y
# PCI devices
#
# CONFIG_SND_AD1889 is not set
+# CONFIG_SND_ALS300 is not set
# CONFIG_SND_ALS4000 is not set
# CONFIG_SND_ALI5451 is not set
# CONFIG_SND_ATIIXP is not set
@@ -1009,6 +1009,7 @@ CONFIG_SND_SUPPORT_OLD_API=y
# CONFIG_SND_MIXART is not set
# CONFIG_SND_NM256 is not set
# CONFIG_SND_PCXHR is not set
+# CONFIG_SND_RIPTIDE is not set
# CONFIG_SND_RME32 is not set
# CONFIG_SND_RME96 is not set
# CONFIG_SND_RME9652 is not set
@@ -1041,6 +1042,7 @@ CONFIG_SND_USB_AUDIO=m
#
CONFIG_USB_ARCH_HAS_HCD=y
CONFIG_USB_ARCH_HAS_OHCI=y
+CONFIG_USB_ARCH_HAS_EHCI=y
CONFIG_USB=y
# CONFIG_USB_DEBUG is not set
@@ -1068,7 +1070,6 @@ CONFIG_USB_OHCI_LITTLE_ENDIAN=y
#
# USB Device Class drivers
#
-# CONFIG_OBSOLETE_OSS_USB_DRIVER is not set
CONFIG_USB_ACM=m
CONFIG_USB_PRINTER=y
@@ -1126,15 +1127,6 @@ CONFIG_USB_HIDDEV=y
# CONFIG_USB_MICROTEK is not set
#
-# USB Multimedia devices
-#
-# CONFIG_USB_DABUSB is not set
-
-#
-# Video4Linux support is needed for USB Multimedia device support
-#
-
-#
# USB Network Adapters
#
CONFIG_USB_CATC=m
@@ -1194,6 +1186,7 @@ CONFIG_USB_SERIAL_KEYSPAN_USA49WLC=y
CONFIG_USB_SERIAL_KLSI=m
CONFIG_USB_SERIAL_KOBIL_SCT=m
CONFIG_USB_SERIAL_MCT_U232=m
+# CONFIG_USB_SERIAL_NAVMAN is not set
CONFIG_USB_SERIAL_PL2303=m
# CONFIG_USB_SERIAL_HP4X is not set
CONFIG_USB_SERIAL_SAFE=m
@@ -1237,17 +1230,23 @@ CONFIG_USB_EZUSB=y
# CONFIG_MMC is not set
#
+# LED devices
+#
+# CONFIG_NEW_LEDS is not set
+
+#
# InfiniBand support
#
# CONFIG_INFINIBAND is not set
#
-# SN Devices
+# EDAC - error detection and reporting (RAS) (EXPERIMENTAL)
#
#
-# EDAC - error detection and reporting (RAS)
+# Real Time Clock
#
+# CONFIG_RTC_CLASS is not set
#
# File systems
@@ -1319,7 +1318,6 @@ CONFIG_TMPFS=y
CONFIG_HUGETLBFS=y
CONFIG_HUGETLB_PAGE=y
CONFIG_RAMFS=y
-# CONFIG_RELAYFS_FS is not set
# CONFIG_CONFIGFS_FS is not set
#
diff --git a/arch/powerpc/configs/iseries_defconfig b/arch/powerpc/configs/iseries_defconfig
index 1816a46742f..a95e455a194 100644
--- a/arch/powerpc/configs/iseries_defconfig
+++ b/arch/powerpc/configs/iseries_defconfig
@@ -1,7 +1,7 @@
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.16-rc6
-# Wed Mar 15 16:19:52 2006
+# Linux kernel version: 2.6.17-rc1
+# Wed Apr 19 11:46:44 2006
#
CONFIG_PPC64=y
CONFIG_64BIT=y
@@ -9,6 +9,7 @@ CONFIG_PPC_MERGE=y
CONFIG_MMU=y
CONFIG_GENERIC_HARDIRQS=y
CONFIG_RWSEM_XCHGADD_ALGORITHM=y
+CONFIG_GENERIC_HWEIGHT=y
CONFIG_GENERIC_CALIBRATE_DELAY=y
CONFIG_PPC=y
CONFIG_EARLY_PRINTK=y
@@ -30,6 +31,7 @@ CONFIG_POWER4=y
CONFIG_PPC_FPU=y
# CONFIG_ALTIVEC is not set
CONFIG_PPC_STD_MMU=y
+CONFIG_VIRT_CPU_ACCOUNTING=y
CONFIG_SMP=y
CONFIG_NR_CPUS=32
@@ -55,6 +57,7 @@ CONFIG_AUDITSYSCALL=y
CONFIG_IKCONFIG=y
CONFIG_IKCONFIG_PROC=y
# CONFIG_CPUSETS is not set
+# CONFIG_RELAY is not set
CONFIG_INITRAMFS_SOURCE=""
CONFIG_CC_OPTIMIZE_FOR_SIZE=y
# CONFIG_EMBEDDED is not set
@@ -69,10 +72,6 @@ CONFIG_BASE_FULL=y
CONFIG_FUTEX=y
CONFIG_EPOLL=y
CONFIG_SHMEM=y
-CONFIG_CC_ALIGN_FUNCTIONS=0
-CONFIG_CC_ALIGN_LABELS=0
-CONFIG_CC_ALIGN_LOOPS=0
-CONFIG_CC_ALIGN_JUMPS=0
CONFIG_SLAB=y
# CONFIG_TINY_SHMEM is not set
CONFIG_BASE_SMALL=0
@@ -84,7 +83,6 @@ CONFIG_BASE_SMALL=0
CONFIG_MODULES=y
CONFIG_MODULE_UNLOAD=y
# CONFIG_MODULE_FORCE_UNLOAD is not set
-CONFIG_OBSOLETE_MODPARM=y
CONFIG_MODVERSIONS=y
CONFIG_MODULE_SRCVERSION_ALL=y
CONFIG_KMOD=y
@@ -93,6 +91,7 @@ CONFIG_STOP_MACHINE=y
#
# Block layer
#
+# CONFIG_BLK_DEV_IO_TRACE is not set
#
# IO Schedulers
@@ -165,7 +164,6 @@ CONFIG_GENERIC_ISA_DMA=y
# CONFIG_PPC_INDIRECT_PCI is not set
CONFIG_PCI=y
CONFIG_PCI_DOMAINS=y
-CONFIG_PCI_LEGACY_PROC=y
# CONFIG_PCI_DEBUG is not set
#
@@ -207,6 +205,7 @@ CONFIG_SYN_COOKIES=y
CONFIG_INET_AH=m
CONFIG_INET_ESP=m
CONFIG_INET_IPCOMP=m
+CONFIG_INET_XFRM_TUNNEL=m
CONFIG_INET_TUNNEL=y
CONFIG_INET_DIAG=y
CONFIG_INET_TCP_DIAG=y
@@ -218,6 +217,8 @@ CONFIG_TCP_CONG_BIC=y
#
# CONFIG_IP_VS is not set
# CONFIG_IPV6 is not set
+# CONFIG_INET6_XFRM_TUNNEL is not set
+# CONFIG_INET6_TUNNEL is not set
CONFIG_NETFILTER=y
# CONFIG_NETFILTER_DEBUG is not set
@@ -236,11 +237,14 @@ CONFIG_NETFILTER_XT_MATCH_CONNBYTES=m
CONFIG_NETFILTER_XT_MATCH_CONNMARK=m
CONFIG_NETFILTER_XT_MATCH_CONNTRACK=m
# CONFIG_NETFILTER_XT_MATCH_DCCP is not set
+# CONFIG_NETFILTER_XT_MATCH_ESP is not set
CONFIG_NETFILTER_XT_MATCH_HELPER=m
CONFIG_NETFILTER_XT_MATCH_LENGTH=m
CONFIG_NETFILTER_XT_MATCH_LIMIT=m
CONFIG_NETFILTER_XT_MATCH_MAC=m
CONFIG_NETFILTER_XT_MATCH_MARK=m
+# CONFIG_NETFILTER_XT_MATCH_POLICY is not set
+# CONFIG_NETFILTER_XT_MATCH_MULTIPORT is not set
CONFIG_NETFILTER_XT_MATCH_PKTTYPE=m
CONFIG_NETFILTER_XT_MATCH_REALM=m
CONFIG_NETFILTER_XT_MATCH_SCTP=m
@@ -262,20 +266,19 @@ CONFIG_IP_NF_IRC=m
CONFIG_IP_NF_TFTP=m
CONFIG_IP_NF_AMANDA=m
# CONFIG_IP_NF_PPTP is not set
+# CONFIG_IP_NF_H323 is not set
CONFIG_IP_NF_QUEUE=m
CONFIG_IP_NF_IPTABLES=m
CONFIG_IP_NF_MATCH_IPRANGE=m
-CONFIG_IP_NF_MATCH_MULTIPORT=m
CONFIG_IP_NF_MATCH_TOS=m
CONFIG_IP_NF_MATCH_RECENT=m
CONFIG_IP_NF_MATCH_ECN=m
CONFIG_IP_NF_MATCH_DSCP=m
-CONFIG_IP_NF_MATCH_AH_ESP=m
+# CONFIG_IP_NF_MATCH_AH is not set
CONFIG_IP_NF_MATCH_TTL=m
CONFIG_IP_NF_MATCH_OWNER=m
CONFIG_IP_NF_MATCH_ADDRTYPE=m
CONFIG_IP_NF_MATCH_HASHLIMIT=m
-CONFIG_IP_NF_MATCH_POLICY=m
CONFIG_IP_NF_FILTER=m
CONFIG_IP_NF_TARGET_REJECT=m
CONFIG_IP_NF_TARGET_LOG=m
@@ -479,6 +482,7 @@ CONFIG_MD_RAID0=y
CONFIG_MD_RAID1=y
CONFIG_MD_RAID10=m
CONFIG_MD_RAID5=y
+# CONFIG_MD_RAID5_RESHAPE is not set
CONFIG_MD_RAID6=m
CONFIG_MD_MULTIPATH=m
CONFIG_MD_FAULTY=m
@@ -702,7 +706,6 @@ CONFIG_LEGACY_PTY_COUNT=256
# Watchdog Cards
#
# CONFIG_WATCHDOG is not set
-# CONFIG_RTC is not set
CONFIG_GEN_RTC=y
# CONFIG_GEN_RTC_X is not set
# CONFIG_DTLK is not set
@@ -751,10 +754,6 @@ CONFIG_MAX_RAW_DEVS=256
#
#
-# Multimedia Capabilities Port drivers
-#
-
-#
# Multimedia devices
#
# CONFIG_VIDEO_DEV is not set
@@ -779,6 +778,7 @@ CONFIG_MAX_RAW_DEVS=256
#
CONFIG_USB_ARCH_HAS_HCD=y
CONFIG_USB_ARCH_HAS_OHCI=y
+CONFIG_USB_ARCH_HAS_EHCI=y
# CONFIG_USB is not set
#
@@ -796,6 +796,11 @@ CONFIG_USB_ARCH_HAS_OHCI=y
# CONFIG_MMC is not set
#
+# LED devices
+#
+# CONFIG_NEW_LEDS is not set
+
+#
# InfiniBand support
#
# CONFIG_INFINIBAND is not set
@@ -805,6 +810,11 @@ CONFIG_USB_ARCH_HAS_OHCI=y
#
#
+# Real Time Clock
+#
+# CONFIG_RTC_CLASS is not set
+
+#
# File systems
#
CONFIG_EXT2_FS=y
@@ -878,7 +888,6 @@ CONFIG_TMPFS=y
# CONFIG_HUGETLBFS is not set
# CONFIG_HUGETLB_PAGE is not set
CONFIG_RAMFS=y
-# CONFIG_RELAYFS_FS is not set
# CONFIG_CONFIGFS_FS is not set
#
diff --git a/arch/powerpc/configs/pseries_defconfig b/arch/powerpc/configs/pseries_defconfig
index daaf038a1fa..58e68ce09b0 100644
--- a/arch/powerpc/configs/pseries_defconfig
+++ b/arch/powerpc/configs/pseries_defconfig
@@ -1,7 +1,7 @@
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.16-rc2
-# Fri Feb 10 17:33:32 2006
+# Linux kernel version: 2.6.17-rc1
+# Wed Apr 19 11:48:00 2006
#
CONFIG_PPC64=y
CONFIG_64BIT=y
@@ -9,6 +9,7 @@ CONFIG_PPC_MERGE=y
CONFIG_MMU=y
CONFIG_GENERIC_HARDIRQS=y
CONFIG_RWSEM_XCHGADD_ALGORITHM=y
+CONFIG_GENERIC_HWEIGHT=y
CONFIG_GENERIC_CALIBRATE_DELAY=y
CONFIG_PPC=y
CONFIG_EARLY_PRINTK=y
@@ -30,6 +31,7 @@ CONFIG_POWER4=y
CONFIG_PPC_FPU=y
CONFIG_ALTIVEC=y
CONFIG_PPC_STD_MMU=y
+CONFIG_VIRT_CPU_ACCOUNTING=y
CONFIG_SMP=y
CONFIG_NR_CPUS=128
@@ -55,6 +57,7 @@ CONFIG_AUDITSYSCALL=y
CONFIG_IKCONFIG=y
CONFIG_IKCONFIG_PROC=y
CONFIG_CPUSETS=y
+# CONFIG_RELAY is not set
CONFIG_INITRAMFS_SOURCE=""
CONFIG_CC_OPTIMIZE_FOR_SIZE=y
# CONFIG_EMBEDDED is not set
@@ -69,10 +72,6 @@ CONFIG_BASE_FULL=y
CONFIG_FUTEX=y
CONFIG_EPOLL=y
CONFIG_SHMEM=y
-CONFIG_CC_ALIGN_FUNCTIONS=0
-CONFIG_CC_ALIGN_LABELS=0
-CONFIG_CC_ALIGN_LOOPS=0
-CONFIG_CC_ALIGN_JUMPS=0
CONFIG_SLAB=y
# CONFIG_TINY_SHMEM is not set
CONFIG_BASE_SMALL=0
@@ -84,7 +83,6 @@ CONFIG_BASE_SMALL=0
CONFIG_MODULES=y
CONFIG_MODULE_UNLOAD=y
# CONFIG_MODULE_FORCE_UNLOAD is not set
-CONFIG_OBSOLETE_MODPARM=y
CONFIG_MODVERSIONS=y
CONFIG_MODULE_SRCVERSION_ALL=y
CONFIG_KMOD=y
@@ -93,6 +91,7 @@ CONFIG_STOP_MACHINE=y
#
# Block layer
#
+# CONFIG_BLK_DEV_IO_TRACE is not set
#
# IO Schedulers
@@ -188,7 +187,6 @@ CONFIG_PPC_I8259=y
# CONFIG_PPC_INDIRECT_PCI is not set
CONFIG_PCI=y
CONFIG_PCI_DOMAINS=y
-CONFIG_PCI_LEGACY_PROC=y
# CONFIG_PCI_DEBUG is not set
#
@@ -235,6 +233,7 @@ CONFIG_SYN_COOKIES=y
CONFIG_INET_AH=m
CONFIG_INET_ESP=m
CONFIG_INET_IPCOMP=m
+CONFIG_INET_XFRM_TUNNEL=m
CONFIG_INET_TUNNEL=y
CONFIG_INET_DIAG=y
CONFIG_INET_TCP_DIAG=y
@@ -246,6 +245,8 @@ CONFIG_TCP_CONG_BIC=y
#
# CONFIG_IP_VS is not set
# CONFIG_IPV6 is not set
+# CONFIG_INET6_XFRM_TUNNEL is not set
+# CONFIG_INET6_TUNNEL is not set
CONFIG_NETFILTER=y
# CONFIG_NETFILTER_DEBUG is not set
@@ -272,6 +273,7 @@ CONFIG_IP_NF_IRC=m
CONFIG_IP_NF_TFTP=m
CONFIG_IP_NF_AMANDA=m
# CONFIG_IP_NF_PPTP is not set
+# CONFIG_IP_NF_H323 is not set
CONFIG_IP_NF_QUEUE=m
#
@@ -519,6 +521,7 @@ CONFIG_MD_RAID0=y
CONFIG_MD_RAID1=y
CONFIG_MD_RAID10=m
CONFIG_MD_RAID5=y
+# CONFIG_MD_RAID5_RESHAPE is not set
CONFIG_MD_RAID6=m
CONFIG_MD_MULTIPATH=m
CONFIG_MD_FAULTY=m
@@ -750,6 +753,7 @@ CONFIG_HW_CONSOLE=y
#
CONFIG_SERIAL_8250=y
CONFIG_SERIAL_8250_CONSOLE=y
+CONFIG_SERIAL_8250_PCI=y
CONFIG_SERIAL_8250_NR_UARTS=4
CONFIG_SERIAL_8250_RUNTIME_UARTS=4
# CONFIG_SERIAL_8250_EXTENDED is not set
@@ -767,7 +771,9 @@ CONFIG_LEGACY_PTY_COUNT=256
# CONFIG_PRINTER is not set
# CONFIG_PPDEV is not set
# CONFIG_TIPAR is not set
+CONFIG_HVC_DRIVER=y
CONFIG_HVC_CONSOLE=y
+# CONFIG_HVC_RTAS is not set
CONFIG_HVCS=m
#
@@ -779,7 +785,6 @@ CONFIG_HVCS=m
# Watchdog Cards
#
# CONFIG_WATCHDOG is not set
-# CONFIG_RTC is not set
CONFIG_GEN_RTC=y
# CONFIG_GEN_RTC_X is not set
# CONFIG_DTLK is not set
@@ -830,7 +835,6 @@ CONFIG_I2C_ALGOBIT=y
# CONFIG_I2C_PARPORT_LIGHT is not set
# CONFIG_I2C_PROSAVAGE is not set
# CONFIG_I2C_SAVAGE4 is not set
-# CONFIG_SCx200_ACB is not set
# CONFIG_I2C_SIS5595 is not set
# CONFIG_I2C_SIS630 is not set
# CONFIG_I2C_SIS96X is not set
@@ -849,9 +853,7 @@ CONFIG_I2C_ALGOBIT=y
# CONFIG_SENSORS_PCF8574 is not set
# CONFIG_SENSORS_PCA9539 is not set
# CONFIG_SENSORS_PCF8591 is not set
-# CONFIG_SENSORS_RTC8564 is not set
# CONFIG_SENSORS_MAX6875 is not set
-# CONFIG_RTC_X1205_I2C is not set
# CONFIG_I2C_DEBUG_CORE is not set
# CONFIG_I2C_DEBUG_ALGO is not set
# CONFIG_I2C_DEBUG_BUS is not set
@@ -879,10 +881,6 @@ CONFIG_I2C_ALGOBIT=y
#
#
-# Multimedia Capabilities Port drivers
-#
-
-#
# Multimedia devices
#
# CONFIG_VIDEO_DEV is not set
@@ -891,6 +889,7 @@ CONFIG_I2C_ALGOBIT=y
# Digital Video Broadcasting Devices
#
# CONFIG_DVB is not set
+# CONFIG_USB_DABUSB is not set
#
# Graphics support
@@ -900,6 +899,7 @@ CONFIG_FB_CFB_FILLRECT=y
CONFIG_FB_CFB_COPYAREA=y
CONFIG_FB_CFB_IMAGEBLIT=y
CONFIG_FB_MACMODES=y
+CONFIG_FB_FIRMWARE_EDID=y
CONFIG_FB_MODE_HELPERS=y
CONFIG_FB_TILEBLITTING=y
# CONFIG_FB_CIRRUS is not set
@@ -919,7 +919,6 @@ CONFIG_FB_MATROX_MYSTIQUE=y
CONFIG_FB_MATROX_G=y
# CONFIG_FB_MATROX_I2C is not set
CONFIG_FB_MATROX_MULTIHEAD=y
-# CONFIG_FB_RADEON_OLD is not set
CONFIG_FB_RADEON=y
CONFIG_FB_RADEON_I2C=y
# CONFIG_FB_RADEON_DEBUG is not set
@@ -968,6 +967,7 @@ CONFIG_LCD_DEVICE=y
#
CONFIG_USB_ARCH_HAS_HCD=y
CONFIG_USB_ARCH_HAS_OHCI=y
+CONFIG_USB_ARCH_HAS_EHCI=y
CONFIG_USB=y
# CONFIG_USB_DEBUG is not set
@@ -1048,15 +1048,6 @@ CONFIG_USB_HIDDEV=y
# CONFIG_USB_MICROTEK is not set
#
-# USB Multimedia devices
-#
-# CONFIG_USB_DABUSB is not set
-
-#
-# Video4Linux support is needed for USB Multimedia device support
-#
-
-#
# USB Network Adapters
#
# CONFIG_USB_CATC is not set
@@ -1109,6 +1100,11 @@ CONFIG_USB_MON=y
# CONFIG_MMC is not set
#
+# LED devices
+#
+# CONFIG_NEW_LEDS is not set
+
+#
# InfiniBand support
#
CONFIG_INFINIBAND=m
@@ -1121,12 +1117,13 @@ CONFIG_INFINIBAND_IPOIB=m
# CONFIG_INFINIBAND_SRP is not set
#
-# SN Devices
+# EDAC - error detection and reporting (RAS) (EXPERIMENTAL)
#
#
-# EDAC - error detection and reporting (RAS)
+# Real Time Clock
#
+# CONFIG_RTC_CLASS is not set
#
# File systems
@@ -1202,7 +1199,6 @@ CONFIG_TMPFS=y
CONFIG_HUGETLBFS=y
CONFIG_HUGETLB_PAGE=y
CONFIG_RAMFS=y
-# CONFIG_RELAYFS_FS is not set
# CONFIG_CONFIGFS_FS is not set
#
diff --git a/arch/powerpc/kernel/Makefile b/arch/powerpc/kernel/Makefile
index 0cc0995b81b..803858e8616 100644
--- a/arch/powerpc/kernel/Makefile
+++ b/arch/powerpc/kernel/Makefile
@@ -20,7 +20,7 @@ obj-$(CONFIG_PPC64) += setup_64.o binfmt_elf32.o sys_ppc32.o \
firmware.o sysfs.o
obj-$(CONFIG_PPC64) += vdso64/
obj-$(CONFIG_ALTIVEC) += vecemu.o vector.o
-obj-$(CONFIG_POWER4) += idle_power4.o
+obj-$(CONFIG_PPC_970_NAP) += idle_power4.o
obj-$(CONFIG_PPC_OF) += of_device.o prom_parse.o
procfs-$(CONFIG_PPC64) := proc_ppc64.o
obj-$(CONFIG_PROC_FS) += $(procfs-y)
diff --git a/arch/powerpc/kernel/asm-offsets.c b/arch/powerpc/kernel/asm-offsets.c
index 54b48f33005..8f85c5e8a55 100644
--- a/arch/powerpc/kernel/asm-offsets.c
+++ b/arch/powerpc/kernel/asm-offsets.c
@@ -91,6 +91,7 @@ int main(void)
#endif /* CONFIG_PPC64 */
DEFINE(TI_FLAGS, offsetof(struct thread_info, flags));
+ DEFINE(TI_LOCAL_FLAGS, offsetof(struct thread_info, local_flags));
DEFINE(TI_PREEMPT, offsetof(struct thread_info, preempt_count));
DEFINE(TI_TASK, offsetof(struct thread_info, task));
#ifdef CONFIG_PPC32
diff --git a/arch/powerpc/kernel/cputable.c b/arch/powerpc/kernel/cputable.c
index 39e348a3ade..3f7182db9ed 100644
--- a/arch/powerpc/kernel/cputable.c
+++ b/arch/powerpc/kernel/cputable.c
@@ -57,6 +57,8 @@ extern void __setup_cpu_ppc970(unsigned long offset, struct cpu_spec* spec);
PPC_FEATURE_SMT | PPC_FEATURE_ICACHE_SNOOP)
#define COMMON_USER_POWER5_PLUS (COMMON_USER_PPC64 | PPC_FEATURE_POWER5_PLUS|\
PPC_FEATURE_SMT | PPC_FEATURE_ICACHE_SNOOP)
+#define COMMON_USER_POWER6 (COMMON_USER_PPC64 | PPC_FEATURE_ARCH_2_05 |\
+ PPC_FEATURE_SMT | PPC_FEATURE_ICACHE_SNOOP)
#define COMMON_USER_BOOKE (PPC_FEATURE_32 | PPC_FEATURE_HAS_MMU | \
PPC_FEATURE_BOOKE)
@@ -263,6 +265,20 @@ struct cpu_spec cpu_specs[] = {
.oprofile_type = PPC_OPROFILE_POWER4,
.platform = "power5+",
},
+ { /* Power6 */
+ .pvr_mask = 0xffff0000,
+ .pvr_value = 0x003e0000,
+ .cpu_name = "POWER6",
+ .cpu_features = CPU_FTRS_POWER6,
+ .cpu_user_features = COMMON_USER_POWER6,
+ .icache_bsize = 128,
+ .dcache_bsize = 128,
+ .num_pmcs = 6,
+ .cpu_setup = __setup_cpu_power4,
+ .oprofile_cpu_type = "ppc64/power6",
+ .oprofile_type = PPC_OPROFILE_POWER4,
+ .platform = "power6",
+ },
{ /* Cell Broadband Engine */
.pvr_mask = 0xffff0000,
.pvr_value = 0x00700000,
diff --git a/arch/powerpc/kernel/entry_32.S b/arch/powerpc/kernel/entry_32.S
index b3a97946722..8866fd26c6b 100644
--- a/arch/powerpc/kernel/entry_32.S
+++ b/arch/powerpc/kernel/entry_32.S
@@ -128,37 +128,36 @@ transfer_to_handler:
stw r12,4(r11)
#endif
b 3f
+
2: /* if from kernel, check interrupted DOZE/NAP mode and
* check for stack overflow
*/
+ lwz r9,THREAD_INFO-THREAD(r12)
+ cmplw r1,r9 /* if r1 <= current->thread_info */
+ ble- stack_ovf /* then the kernel stack overflowed */
+5:
#ifdef CONFIG_6xx
- mfspr r11,SPRN_HID0
- mtcr r11
-BEGIN_FTR_SECTION
- bt- 8,4f /* Check DOZE */
-END_FTR_SECTION_IFSET(CPU_FTR_CAN_DOZE)
-BEGIN_FTR_SECTION
- bt- 9,4f /* Check NAP */
-END_FTR_SECTION_IFSET(CPU_FTR_CAN_NAP)
+ tophys(r9,r9) /* check local flags */
+ lwz r12,TI_LOCAL_FLAGS(r9)
+ mtcrf 0x01,r12
+ bt- 31-TLF_NAPPING,4f
#endif /* CONFIG_6xx */
.globl transfer_to_handler_cont
transfer_to_handler_cont:
- lwz r11,THREAD_INFO-THREAD(r12)
- cmplw r1,r11 /* if r1 <= current->thread_info */
- ble- stack_ovf /* then the kernel stack overflowed */
3:
mflr r9
lwz r11,0(r9) /* virtual address of handler */
lwz r9,4(r9) /* where to go when done */
- FIX_SRR1(r10,r12)
mtspr SPRN_SRR0,r11
mtspr SPRN_SRR1,r10
mtlr r9
SYNC
RFI /* jump to handler, enable MMU */
-#ifdef CONFIG_6xx
-4: b power_save_6xx_restore
+#ifdef CONFIG_6xx
+4: rlwinm r12,r12,0,~_TLF_NAPPING
+ stw r12,TI_LOCAL_FLAGS(r9)
+ b power_save_6xx_restore
#endif
/*
@@ -167,10 +166,10 @@ transfer_to_handler_cont:
*/
stack_ovf:
/* sometimes we use a statically-allocated stack, which is OK. */
- lis r11,_end@h
- ori r11,r11,_end@l
- cmplw r1,r11
- ble 3b /* r1 <= &_end is OK */
+ lis r12,_end@h
+ ori r12,r12,_end@l
+ cmplw r1,r12
+ ble 5b /* r1 <= &_end is OK */
SAVE_NVGPRS(r11)
addi r3,r1,STACK_FRAME_OVERHEAD
lis r1,init_thread_union@ha
diff --git a/arch/powerpc/kernel/head_64.S b/arch/powerpc/kernel/head_64.S
index a5ae04a57c7..b7d140430a4 100644
--- a/arch/powerpc/kernel/head_64.S
+++ b/arch/powerpc/kernel/head_64.S
@@ -376,11 +376,28 @@ label##_common: \
bl hdlr; \
b .ret_from_except
+/*
+ * Like STD_EXCEPTION_COMMON, but for exceptions that can occur
+ * in the idle task and therefore need the special idle handling.
+ */
+#define STD_EXCEPTION_COMMON_IDLE(trap, label, hdlr) \
+ .align 7; \
+ .globl label##_common; \
+label##_common: \
+ EXCEPTION_PROLOG_COMMON(trap, PACA_EXGEN); \
+ FINISH_NAP; \
+ DISABLE_INTS; \
+ bl .save_nvgprs; \
+ addi r3,r1,STACK_FRAME_OVERHEAD; \
+ bl hdlr; \
+ b .ret_from_except
+
#define STD_EXCEPTION_COMMON_LITE(trap, label, hdlr) \
.align 7; \
.globl label##_common; \
label##_common: \
EXCEPTION_PROLOG_COMMON(trap, PACA_EXGEN); \
+ FINISH_NAP; \
DISABLE_INTS; \
bl .ppc64_runlatch_on; \
addi r3,r1,STACK_FRAME_OVERHEAD; \
@@ -388,6 +405,25 @@ label##_common: \
b .ret_from_except_lite
/*
+ * When the idle code in power4_idle puts the CPU into NAP mode,
+ * it has to do so in a loop, and relies on the external interrupt
+ * and decrementer interrupt entry code to get it out of the loop.
+ * It sets the _TLF_NAPPING bit in current_thread_info()->local_flags
+ * to signal that it is in the loop and needs help to get out.
+ */
+#ifdef CONFIG_PPC_970_NAP
+#define FINISH_NAP \
+BEGIN_FTR_SECTION \
+ clrrdi r11,r1,THREAD_SHIFT; \
+ ld r9,TI_LOCAL_FLAGS(r11); \
+ andi. r10,r9,_TLF_NAPPING; \
+ bnel power4_fixup_nap; \
+END_FTR_SECTION_IFSET(CPU_FTR_CAN_NAP)
+#else
+#define FINISH_NAP
+#endif
+
+/*
* Start of pSeries system interrupt routines
*/
. = 0x100
@@ -772,6 +808,7 @@ hardware_interrupt_iSeries_masked:
.globl machine_check_common
machine_check_common:
EXCEPTION_PROLOG_COMMON(0x200, PACA_EXMC)
+ FINISH_NAP
DISABLE_INTS
bl .save_nvgprs
addi r3,r1,STACK_FRAME_OVERHEAD
@@ -783,7 +820,7 @@ machine_check_common:
STD_EXCEPTION_COMMON(0xb00, trap_0b, .unknown_exception)
STD_EXCEPTION_COMMON(0xd00, single_step, .single_step_exception)
STD_EXCEPTION_COMMON(0xe00, trap_0e, .unknown_exception)
- STD_EXCEPTION_COMMON(0xf00, performance_monitor, .performance_monitor_exception)
+ STD_EXCEPTION_COMMON_IDLE(0xf00, performance_monitor, .performance_monitor_exception)
STD_EXCEPTION_COMMON(0x1300, instruction_breakpoint, .instruction_breakpoint_exception)
#ifdef CONFIG_ALTIVEC
STD_EXCEPTION_COMMON(0x1700, altivec_assist, .altivec_assist_exception)
@@ -1034,6 +1071,7 @@ unrecov_slb:
.globl hardware_interrupt_entry
hardware_interrupt_common:
EXCEPTION_PROLOG_COMMON(0x500, PACA_EXGEN)
+ FINISH_NAP
hardware_interrupt_entry:
DISABLE_INTS
bl .ppc64_runlatch_on
@@ -1041,6 +1079,15 @@ hardware_interrupt_entry:
bl .do_IRQ
b .ret_from_except_lite
+#ifdef CONFIG_PPC_970_NAP
+power4_fixup_nap:
+ andc r9,r9,r10
+ std r9,TI_LOCAL_FLAGS(r11)
+ ld r10,_LINK(r1) /* make idle task do the */
+ std r10,_NIP(r1) /* equivalent of a blr */
+ blr
+#endif
+
.align 7
.globl alignment_common
alignment_common:
diff --git a/arch/powerpc/kernel/idle.c b/arch/powerpc/kernel/idle.c
index e9f321d74d8..d491052c8e0 100644
--- a/arch/powerpc/kernel/idle.c
+++ b/arch/powerpc/kernel/idle.c
@@ -50,9 +50,9 @@ void cpu_idle(void)
set_thread_flag(TIF_POLLING_NRFLAG);
while (1) {
- ppc64_runlatch_off();
-
while (!need_resched() && !cpu_should_die()) {
+ ppc64_runlatch_off();
+
if (ppc_md.power_save) {
clear_thread_flag(TIF_POLLING_NRFLAG);
/*
diff --git a/arch/powerpc/kernel/idle_6xx.S b/arch/powerpc/kernel/idle_6xx.S
index 12a4efbaa08..b45fa0e3721 100644
--- a/arch/powerpc/kernel/idle_6xx.S
+++ b/arch/powerpc/kernel/idle_6xx.S
@@ -22,8 +22,6 @@
#include <asm/ppc_asm.h>
#include <asm/asm-offsets.h>
-#undef DEBUG
-
.text
/*
@@ -109,12 +107,6 @@ BEGIN_FTR_SECTION
dcbf 0,r4
dcbf 0,r4
END_FTR_SECTION_IFSET(CPU_FTR_NAP_DISABLE_L2_PR)
-#ifdef DEBUG
- lis r6,nap_enter_count@ha
- lwz r4,nap_enter_count@l(r6)
- addi r4,r4,1
- stw r4,nap_enter_count@l(r6)
-#endif
2:
BEGIN_FTR_SECTION
/* Go to low speed mode on some 750FX */
@@ -144,48 +136,42 @@ BEGIN_FTR_SECTION
DSSALL
sync
END_FTR_SECTION_IFSET(CPU_FTR_ALTIVEC)
+ rlwinm r9,r1,0,0,31-THREAD_SHIFT /* current thread_info */
+ lwz r8,TI_LOCAL_FLAGS(r9) /* set napping bit */
+ ori r8,r8,_TLF_NAPPING /* so when we take an exception */
+ stw r8,TI_LOCAL_FLAGS(r9) /* it will return to our caller */
mfmsr r7
ori r7,r7,MSR_EE
oris r7,r7,MSR_POW@h
- sync
- isync
+1: sync
mtmsr r7
isync
- sync
- blr
-
+ b 1b
+
/*
* Return from NAP/DOZE mode, restore some CPU specific registers,
* we are called with DR/IR still off and r2 containing physical
- * address of current.
+ * address of current. R11 points to the exception frame (physical
+ * address). We have to preserve r10.
*/
_GLOBAL(power_save_6xx_restore)
- mfspr r11,SPRN_HID0
- rlwinm. r11,r11,0,10,8 /* Clear NAP & copy NAP bit !state to cr1 EQ */
- cror 4*cr1+eq,4*cr0+eq,4*cr0+eq
-BEGIN_FTR_SECTION
- rlwinm r11,r11,0,9,7 /* Clear DOZE */
-END_FTR_SECTION_IFSET(CPU_FTR_CAN_DOZE)
- mtspr SPRN_HID0, r11
+ lwz r9,_LINK(r11) /* interrupted in ppc6xx_idle: */
+ stw r9,_NIP(r11) /* make it do a blr */
-#ifdef DEBUG
- beq cr1,1f
- lis r11,(nap_return_count-KERNELBASE)@ha
- lwz r9,nap_return_count@l(r11)
- addi r9,r9,1
- stw r9,nap_return_count@l(r11)
-1:
-#endif
-
- rlwinm r9,r1,0,0,18
- tophys(r9,r9)
- lwz r11,TI_CPU(r9)
+#ifdef CONFIG_SMP
+ mfspr r12,SPRN_SPRG3
+ lwz r11,TI_CPU(r12) /* get cpu number * 4 */
slwi r11,r11,2
+#else
+ li r11,0
+#endif
/* Todo make sure all these are in the same page
- * and load r22 (@ha part + CPU offset) only once
+ * and load r11 (@ha part + CPU offset) only once
*/
BEGIN_FTR_SECTION
- beq cr1,1f
+ mfspr r9,SPRN_HID0
+ andis. r9,r9,HID0_NAP@h
+ beq 1f
addis r9,r11,(nap_save_msscr0-KERNELBASE)@ha
lwz r9,nap_save_msscr0@l(r9)
mtspr SPRN_MSSCR0, r9
@@ -210,10 +196,3 @@ _GLOBAL(nap_save_hid1)
_GLOBAL(powersave_lowspeed)
.long 0
-
-#ifdef DEBUG
-_GLOBAL(nap_enter_count)
- .space 4
-_GLOBAL(nap_return_count)
- .space 4
-#endif
diff --git a/arch/powerpc/kernel/idle_power4.S b/arch/powerpc/kernel/idle_power4.S
index 6dad1c02496..d85c7c938ee 100644
--- a/arch/powerpc/kernel/idle_power4.S
+++ b/arch/powerpc/kernel/idle_power4.S
@@ -35,12 +35,16 @@ BEGIN_FTR_SECTION
DSSALL
sync
END_FTR_SECTION_IFSET(CPU_FTR_ALTIVEC)
+ clrrdi r9,r1,THREAD_SHIFT /* current thread_info */
+ ld r8,TI_LOCAL_FLAGS(r9) /* set napping bit */
+ ori r8,r8,_TLF_NAPPING /* so when we take an exception */
+ std r8,TI_LOCAL_FLAGS(r9) /* it will return to our caller */
mfmsr r7
ori r7,r7,MSR_EE
oris r7,r7,MSR_POW@h
- sync
+1: sync
isync
mtmsrd r7
isync
- sync
- blr
+ b 1b
+
diff --git a/arch/powerpc/kernel/iommu.c b/arch/powerpc/kernel/iommu.c
index d9a7fdef59b..4eba60a3289 100644
--- a/arch/powerpc/kernel/iommu.c
+++ b/arch/powerpc/kernel/iommu.c
@@ -61,6 +61,7 @@ __setup("iommu=", setup_iommu);
static unsigned long iommu_range_alloc(struct iommu_table *tbl,
unsigned long npages,
unsigned long *handle,
+ unsigned long mask,
unsigned int align_order)
{
unsigned long n, end, i, start;
@@ -97,9 +98,21 @@ static unsigned long iommu_range_alloc(struct iommu_table *tbl,
*/
if (start >= limit)
start = largealloc ? tbl->it_largehint : tbl->it_hint;
-
+
again:
+ if (limit + tbl->it_offset > mask) {
+ limit = mask - tbl->it_offset + 1;
+ /* If we're constrained on address range, first try
+ * at the masked hint to avoid O(n) search complexity,
+ * but on second pass, start at 0.
+ */
+ if ((start & mask) >= limit || pass > 0)
+ start = 0;
+ else
+ start &= mask;
+ }
+
n = find_next_zero_bit(tbl->it_map, limit, start);
/* Align allocation */
@@ -150,14 +163,14 @@ static unsigned long iommu_range_alloc(struct iommu_table *tbl,
static dma_addr_t iommu_alloc(struct iommu_table *tbl, void *page,
unsigned int npages, enum dma_data_direction direction,
- unsigned int align_order)
+ unsigned long mask, unsigned int align_order)
{
unsigned long entry, flags;
dma_addr_t ret = DMA_ERROR_CODE;
-
+
spin_lock_irqsave(&(tbl->it_lock), flags);
- entry = iommu_range_alloc(tbl, npages, NULL, align_order);
+ entry = iommu_range_alloc(tbl, npages, NULL, mask, align_order);
if (unlikely(entry == DMA_ERROR_CODE)) {
spin_unlock_irqrestore(&(tbl->it_lock), flags);
@@ -236,7 +249,7 @@ static void iommu_free(struct iommu_table *tbl, dma_addr_t dma_addr,
int iommu_map_sg(struct device *dev, struct iommu_table *tbl,
struct scatterlist *sglist, int nelems,
- enum dma_data_direction direction)
+ unsigned long mask, enum dma_data_direction direction)
{
dma_addr_t dma_next = 0, dma_addr;
unsigned long flags;
@@ -274,7 +287,7 @@ int iommu_map_sg(struct device *dev, struct iommu_table *tbl,
vaddr = (unsigned long)page_address(s->page) + s->offset;
npages = PAGE_ALIGN(vaddr + slen) - (vaddr & PAGE_MASK);
npages >>= PAGE_SHIFT;
- entry = iommu_range_alloc(tbl, npages, &handle, 0);
+ entry = iommu_range_alloc(tbl, npages, &handle, mask >> PAGE_SHIFT, 0);
DBG(" - vaddr: %lx, size: %lx\n", vaddr, slen);
@@ -479,7 +492,8 @@ void iommu_free_table(struct device_node *dn)
* byte within the page as vaddr.
*/
dma_addr_t iommu_map_single(struct iommu_table *tbl, void *vaddr,
- size_t size, enum dma_data_direction direction)
+ size_t size, unsigned long mask,
+ enum dma_data_direction direction)
{
dma_addr_t dma_handle = DMA_ERROR_CODE;
unsigned long uaddr;
@@ -492,7 +506,8 @@ dma_addr_t iommu_map_single(struct iommu_table *tbl, void *vaddr,
npages >>= PAGE_SHIFT;
if (tbl) {
- dma_handle = iommu_alloc(tbl, vaddr, npages, direction, 0);
+ dma_handle = iommu_alloc(tbl, vaddr, npages, direction,
+ mask >> PAGE_SHIFT, 0);
if (dma_handle == DMA_ERROR_CODE) {
if (printk_ratelimit()) {
printk(KERN_INFO "iommu_alloc failed, "
@@ -521,7 +536,7 @@ void iommu_unmap_single(struct iommu_table *tbl, dma_addr_t dma_handle,
* to the dma address (mapping) of the first page.
*/
void *iommu_alloc_coherent(struct iommu_table *tbl, size_t size,
- dma_addr_t *dma_handle, gfp_t flag)
+ dma_addr_t *dma_handle, unsigned long mask, gfp_t flag)
{
void *ret = NULL;
dma_addr_t mapping;
@@ -551,7 +566,8 @@ void *iommu_alloc_coherent(struct iommu_table *tbl, size_t size,
memset(ret, 0, size);
/* Set up tces to cover the allocated range */
- mapping = iommu_alloc(tbl, ret, npages, DMA_BIDIRECTIONAL, order);
+ mapping = iommu_alloc(tbl, ret, npages, DMA_BIDIRECTIONAL,
+ mask >> PAGE_SHIFT, order);
if (mapping == DMA_ERROR_CODE) {
free_pages((unsigned long)ret, order);
ret = NULL;
diff --git a/arch/powerpc/kernel/irq.c b/arch/powerpc/kernel/irq.c
index bb5c9501234..57d560c6889 100644
--- a/arch/powerpc/kernel/irq.c
+++ b/arch/powerpc/kernel/irq.c
@@ -272,18 +272,26 @@ unsigned int virt_irq_to_real_map[NR_IRQS];
* Don't use virtual irqs 0, 1, 2 for devices.
* The pcnet32 driver considers interrupt numbers < 2 to be invalid,
* and 2 is the XICS IPI interrupt.
- * We limit virtual irqs to 17 less than NR_IRQS so that when we
- * offset them by 16 (to reserve the first 16 for ISA interrupts)
- * we don't end up with an interrupt number >= NR_IRQS.
+ * We limit virtual irqs to __irq_offet_value less than virt_irq_max so
+ * that when we offset them we don't end up with an interrupt
+ * number >= virt_irq_max.
*/
#define MIN_VIRT_IRQ 3
-#define MAX_VIRT_IRQ (NR_IRQS - NUM_ISA_INTERRUPTS - 1)
-#define NR_VIRT_IRQS (MAX_VIRT_IRQ - MIN_VIRT_IRQ + 1)
+
+unsigned int virt_irq_max;
+static unsigned int max_virt_irq;
+static unsigned int nr_virt_irqs;
void
virt_irq_init(void)
{
int i;
+
+ if ((virt_irq_max == 0) || (virt_irq_max > (NR_IRQS - 1)))
+ virt_irq_max = NR_IRQS - 1;
+ max_virt_irq = virt_irq_max - __irq_offset_value;
+ nr_virt_irqs = max_virt_irq - MIN_VIRT_IRQ + 1;
+
for (i = 0; i < NR_IRQS; i++)
virt_irq_to_real_map[i] = UNDEFINED_IRQ;
}
@@ -308,17 +316,17 @@ int virt_irq_create_mapping(unsigned int real_irq)
return real_irq;
}
- /* map to a number between MIN_VIRT_IRQ and MAX_VIRT_IRQ */
+ /* map to a number between MIN_VIRT_IRQ and max_virt_irq */
virq = real_irq;
- if (virq > MAX_VIRT_IRQ)
- virq = (virq % NR_VIRT_IRQS) + MIN_VIRT_IRQ;
+ if (virq > max_virt_irq)
+ virq = (virq % nr_virt_irqs) + MIN_VIRT_IRQ;
/* search for this number or a free slot */
first_virq = virq;
while (virt_irq_to_real_map[virq] != UNDEFINED_IRQ) {
if (virt_irq_to_real_map[virq] == real_irq)
return virq;
- if (++virq > MAX_VIRT_IRQ)
+ if (++virq > max_virt_irq)
virq = MIN_VIRT_IRQ;
if (virq == first_virq)
goto nospace; /* oops, no free slots */
@@ -330,8 +338,8 @@ int virt_irq_create_mapping(unsigned int real_irq)
nospace:
if (!warned) {
printk(KERN_CRIT "Interrupt table is full\n");
- printk(KERN_CRIT "Increase NR_IRQS (currently %d) "
- "in your kernel sources and rebuild.\n", NR_IRQS);
+ printk(KERN_CRIT "Increase virt_irq_max (currently %d) "
+ "in your kernel sources and rebuild.\n", virt_irq_max);
warned = 1;
}
return NO_IRQ;
@@ -349,8 +357,8 @@ unsigned int real_irq_to_virt_slowpath(unsigned int real_irq)
virq = real_irq;
- if (virq > MAX_VIRT_IRQ)
- virq = (virq % NR_VIRT_IRQS) + MIN_VIRT_IRQ;
+ if (virq > max_virt_irq)
+ virq = (virq % nr_virt_irqs) + MIN_VIRT_IRQ;
first_virq = virq;
@@ -360,7 +368,7 @@ unsigned int real_irq_to_virt_slowpath(unsigned int real_irq)
virq++;
- if (virq >= MAX_VIRT_IRQ)
+ if (virq >= max_virt_irq)
virq = 0;
} while (first_virq != virq);
diff --git a/arch/powerpc/kernel/kprobes.c b/arch/powerpc/kernel/kprobes.c
index ad7a9021220..f78866367b7 100644
--- a/arch/powerpc/kernel/kprobes.c
+++ b/arch/powerpc/kernel/kprobes.c
@@ -88,34 +88,34 @@ void __kprobes arch_remove_kprobe(struct kprobe *p)
mutex_unlock(&kprobe_mutex);
}
-static inline void prepare_singlestep(struct kprobe *p, struct pt_regs *regs)
+static void __kprobes prepare_singlestep(struct kprobe *p, struct pt_regs *regs)
{
- kprobe_opcode_t insn = *p->ainsn.insn;
-
regs->msr |= MSR_SE;
- /* single step inline if it is a trap variant */
- if (is_trap(insn))
- regs->nip = (unsigned long)p->addr;
- else
- regs->nip = (unsigned long)p->ainsn.insn;
+ /*
+ * On powerpc we should single step on the original
+ * instruction even if the probed insn is a trap
+ * variant as values in regs could play a part in
+ * if the trap is taken or not
+ */
+ regs->nip = (unsigned long)p->ainsn.insn;
}
-static inline void save_previous_kprobe(struct kprobe_ctlblk *kcb)
+static void __kprobes save_previous_kprobe(struct kprobe_ctlblk *kcb)
{
kcb->prev_kprobe.kp = kprobe_running();
kcb->prev_kprobe.status = kcb->kprobe_status;
kcb->prev_kprobe.saved_msr = kcb->kprobe_saved_msr;
}
-static inline void restore_previous_kprobe(struct kprobe_ctlblk *kcb)
+static void __kprobes restore_previous_kprobe(struct kprobe_ctlblk *kcb)
{
__get_cpu_var(current_kprobe) = kcb->prev_kprobe.kp;
kcb->kprobe_status = kcb->prev_kprobe.status;
kcb->kprobe_saved_msr = kcb->prev_kprobe.saved_msr;
}
-static inline void set_current_kprobe(struct kprobe *p, struct pt_regs *regs,
+static void __kprobes set_current_kprobe(struct kprobe *p, struct pt_regs *regs,
struct kprobe_ctlblk *kcb)
{
__get_cpu_var(current_kprobe) = p;
@@ -141,7 +141,7 @@ void __kprobes arch_prepare_kretprobe(struct kretprobe *rp,
}
}
-static inline int kprobe_handler(struct pt_regs *regs)
+static int __kprobes kprobe_handler(struct pt_regs *regs)
{
struct kprobe *p;
int ret = 0;
@@ -334,7 +334,7 @@ static void __kprobes resume_execution(struct kprobe *p, struct pt_regs *regs)
regs->nip = (unsigned long)p->addr + 4;
}
-static inline int post_kprobe_handler(struct pt_regs *regs)
+static int __kprobes post_kprobe_handler(struct pt_regs *regs)
{
struct kprobe *cur = kprobe_running();
struct kprobe_ctlblk *kcb = get_kprobe_ctlblk();
@@ -370,7 +370,7 @@ out:
return 1;
}
-static inline int kprobe_fault_handler(struct pt_regs *regs, int trapnr)
+static int __kprobes kprobe_fault_handler(struct pt_regs *regs, int trapnr)
{
struct kprobe *cur = kprobe_running();
struct kprobe_ctlblk *kcb = get_kprobe_ctlblk();
diff --git a/arch/powerpc/kernel/module_64.c b/arch/powerpc/kernel/module_64.c
index 928b8581fcb..ba34001fca8 100644
--- a/arch/powerpc/kernel/module_64.c
+++ b/arch/powerpc/kernel/module_64.c
@@ -191,11 +191,19 @@ int module_frob_arch_sections(Elf64_Ehdr *hdr,
(void *)hdr
+ sechdrs[sechdrs[i].sh_link].sh_offset);
}
- if (!me->arch.stubs_section || !me->arch.toc_section) {
- printk("%s: doesn't contain .toc or .stubs.\n", me->name);
+
+ if (!me->arch.stubs_section) {
+ printk("%s: doesn't contain .stubs.\n", me->name);
return -ENOEXEC;
}
+ /* If we don't have a .toc, just use .stubs. We need to set r2
+ to some reasonable value in case the module calls out to
+ other functions via a stub, or if a function pointer escapes
+ the module by some means. */
+ if (!me->arch.toc_section)
+ me->arch.toc_section = me->arch.stubs_section;
+
/* Override the stubs size */
sechdrs[me->arch.stubs_section].sh_size = get_stubs_size(hdr, sechdrs);
return 0;
@@ -342,7 +350,7 @@ int apply_relocate_add(Elf64_Shdr *sechdrs,
break;
case R_PPC64_TOC16:
- /* Subtact TOC pointer */
+ /* Subtract TOC pointer */
value -= my_r2(sechdrs, me);
if (value + 0x8000 > 0xffff) {
printk("%s: bad TOC16 relocation (%lu)\n",
@@ -355,7 +363,7 @@ int apply_relocate_add(Elf64_Shdr *sechdrs,
break;
case R_PPC64_TOC16_DS:
- /* Subtact TOC pointer */
+ /* Subtract TOC pointer */
value -= my_r2(sechdrs, me);
if ((value & 3) != 0 || value + 0x8000 > 0xffff) {
printk("%s: bad TOC16_DS relocation (%lu)\n",
diff --git a/arch/powerpc/kernel/pci_iommu.c b/arch/powerpc/kernel/pci_iommu.c
index c336f3e31cf..c1d95e14bbe 100644
--- a/arch/powerpc/kernel/pci_iommu.c
+++ b/arch/powerpc/kernel/pci_iommu.c
@@ -59,6 +59,25 @@ static inline struct iommu_table *devnode_table(struct device *dev)
}
+static inline unsigned long device_to_mask(struct device *hwdev)
+{
+ struct pci_dev *pdev;
+
+ if (!hwdev) {
+ pdev = ppc64_isabridge_dev;
+ if (!pdev) /* This is the best guess we can do */
+ return 0xfffffffful;
+ } else
+ pdev = to_pci_dev(hwdev);
+
+ if (pdev->dma_mask)
+ return pdev->dma_mask;
+
+ /* Assume devices without mask can take 32 bit addresses */
+ return 0xfffffffful;
+}
+
+
/* Allocates a contiguous real buffer and creates mappings over it.
* Returns the virtual address of the buffer and sets dma_handle
* to the dma address (mapping) of the first page.
@@ -67,7 +86,7 @@ static void *pci_iommu_alloc_coherent(struct device *hwdev, size_t size,
dma_addr_t *dma_handle, gfp_t flag)
{
return iommu_alloc_coherent(devnode_table(hwdev), size, dma_handle,
- flag);
+ device_to_mask(hwdev), flag);
}
static void pci_iommu_free_coherent(struct device *hwdev, size_t size,
@@ -85,7 +104,8 @@ static void pci_iommu_free_coherent(struct device *hwdev, size_t size,
static dma_addr_t pci_iommu_map_single(struct device *hwdev, void *vaddr,
size_t size, enum dma_data_direction direction)
{
- return iommu_map_single(devnode_table(hwdev), vaddr, size, direction);
+ return iommu_map_single(devnode_table(hwdev), vaddr, size,
+ device_to_mask(hwdev), direction);
}
@@ -100,7 +120,7 @@ static int pci_iommu_map_sg(struct device *pdev, struct scatterlist *sglist,
int nelems, enum dma_data_direction direction)
{
return iommu_map_sg(pdev, devnode_table(pdev), sglist,
- nelems, direction);
+ nelems, device_to_mask(pdev), direction);
}
static void pci_iommu_unmap_sg(struct device *pdev, struct scatterlist *sglist,
@@ -112,7 +132,19 @@ static void pci_iommu_unmap_sg(struct device *pdev, struct scatterlist *sglist,
/* We support DMA to/from any memory page via the iommu */
static int pci_iommu_dma_supported(struct device *dev, u64 mask)
{
- return 1;
+ struct iommu_table *tbl = devnode_table(dev);
+
+ if (!tbl || tbl->it_offset > mask) {
+ printk(KERN_INFO "Warning: IOMMU table offset too big for device mask\n");
+ if (tbl)
+ printk(KERN_INFO "mask: 0x%08lx, table offset: 0x%08lx\n",
+ mask, tbl->it_offset);
+ else
+ printk(KERN_INFO "mask: 0x%08lx, table unavailable\n",
+ mask);
+ return 0;
+ } else
+ return 1;
}
void pci_iommu_init(void)
diff --git a/arch/powerpc/kernel/ppc_ksyms.c b/arch/powerpc/kernel/ppc_ksyms.c
index dfa5398ab3c..4b052ae5dc3 100644
--- a/arch/powerpc/kernel/ppc_ksyms.c
+++ b/arch/powerpc/kernel/ppc_ksyms.c
@@ -81,6 +81,7 @@ EXPORT_SYMBOL(strcat);
EXPORT_SYMBOL(strlen);
EXPORT_SYMBOL(strcmp);
EXPORT_SYMBOL(strcasecmp);
+EXPORT_SYMBOL(strncasecmp);
EXPORT_SYMBOL(csum_partial);
EXPORT_SYMBOL(csum_partial_copy_generic);
diff --git a/arch/powerpc/kernel/prom.c b/arch/powerpc/kernel/prom.c
index 4336390bcf3..9a07f97f071 100644
--- a/arch/powerpc/kernel/prom.c
+++ b/arch/powerpc/kernel/prom.c
@@ -62,7 +62,7 @@ static int __initdata dt_root_addr_cells;
static int __initdata dt_root_size_cells;
#ifdef CONFIG_PPC64
-static int __initdata iommu_is_off;
+int __initdata iommu_is_off;
int __initdata iommu_force_on;
unsigned long tce_alloc_start, tce_alloc_end;
#endif
@@ -885,6 +885,74 @@ void __init unflatten_device_tree(void)
DBG(" <- unflatten_device_tree()\n");
}
+/*
+ * ibm,pa-features is a per-cpu property that contains a string of
+ * attribute descriptors, each of which has a 2 byte header plus up
+ * to 254 bytes worth of processor attribute bits. First header
+ * byte specifies the number of bytes following the header.
+ * Second header byte is an "attribute-specifier" type, of which
+ * zero is the only currently-defined value.
+ * Implementation: Pass in the byte and bit offset for the feature
+ * that we are interested in. The function will return -1 if the
+ * pa-features property is missing, or a 1/0 to indicate if the feature
+ * is supported/not supported. Note that the bit numbers are
+ * big-endian to match the definition in PAPR.
+ */
+static struct ibm_pa_feature {
+ unsigned long cpu_features; /* CPU_FTR_xxx bit */
+ unsigned int cpu_user_ftrs; /* PPC_FEATURE_xxx bit */
+ unsigned char pabyte; /* byte number in ibm,pa-features */
+ unsigned char pabit; /* bit number (big-endian) */
+ unsigned char invert; /* if 1, pa bit set => clear feature */
+} ibm_pa_features[] __initdata = {
+ {0, PPC_FEATURE_HAS_MMU, 0, 0, 0},
+ {0, PPC_FEATURE_HAS_FPU, 0, 1, 0},
+ {CPU_FTR_SLB, 0, 0, 2, 0},
+ {CPU_FTR_CTRL, 0, 0, 3, 0},
+ {CPU_FTR_NOEXECUTE, 0, 0, 6, 0},
+ {CPU_FTR_NODSISRALIGN, 0, 1, 1, 1},
+ {CPU_FTR_CI_LARGE_PAGE, 0, 1, 2, 0},
+};
+
+static void __init check_cpu_pa_features(unsigned long node)
+{
+ unsigned char *pa_ftrs;
+ unsigned long len, tablelen, i, bit;
+
+ pa_ftrs = of_get_flat_dt_prop(node, "ibm,pa-features", &tablelen);
+ if (pa_ftrs == NULL)
+ return;
+
+ /* find descriptor with type == 0 */
+ for (;;) {
+ if (tablelen < 3)
+ return;
+ len = 2 + pa_ftrs[0];
+ if (tablelen < len)
+ return; /* descriptor 0 not found */
+ if (pa_ftrs[1] == 0)
+ break;
+ tablelen -= len;
+ pa_ftrs += len;
+ }
+
+ /* loop over bits we know about */
+ for (i = 0; i < ARRAY_SIZE(ibm_pa_features); ++i) {
+ struct ibm_pa_feature *fp = &ibm_pa_features[i];
+
+ if (fp->pabyte >= pa_ftrs[0])
+ continue;
+ bit = (pa_ftrs[2 + fp->pabyte] >> (7 - fp->pabit)) & 1;
+ if (bit ^ fp->invert) {
+ cur_cpu_spec->cpu_features |= fp->cpu_features;
+ cur_cpu_spec->cpu_user_features |= fp->cpu_user_ftrs;
+ } else {
+ cur_cpu_spec->cpu_features &= ~fp->cpu_features;
+ cur_cpu_spec->cpu_user_features &= ~fp->cpu_user_ftrs;
+ }
+ }
+}
+
static int __init early_init_dt_scan_cpus(unsigned long node,
const char *uname, int depth,
void *data)
@@ -969,6 +1037,8 @@ static int __init early_init_dt_scan_cpus(unsigned long node,
}
#endif /* CONFIG_ALTIVEC */
+ check_cpu_pa_features(node);
+
#ifdef CONFIG_PPC_PSERIES
if (nthreads > 1)
cur_cpu_spec->cpu_features |= CPU_FTR_SMT;
diff --git a/arch/powerpc/kernel/prom_init.c b/arch/powerpc/kernel/prom_init.c
index d66c5e77fcf..41e9ab40cd5 100644
--- a/arch/powerpc/kernel/prom_init.c
+++ b/arch/powerpc/kernel/prom_init.c
@@ -636,10 +636,96 @@ static void __init early_cmdline_parse(void)
#ifdef CONFIG_PPC_PSERIES
/*
- * To tell the firmware what our capabilities are, we have to pass
- * it a fake 32-bit ELF header containing a couple of PT_NOTE sections
- * that contain structures that contain the actual values.
+ * There are two methods for telling firmware what our capabilities are.
+ * Newer machines have an "ibm,client-architecture-support" method on the
+ * root node. For older machines, we have to call the "process-elf-header"
+ * method in the /packages/elf-loader node, passing it a fake 32-bit
+ * ELF header containing a couple of PT_NOTE sections that contain
+ * structures that contain various information.
*/
+
+/*
+ * New method - extensible architecture description vector.
+ *
+ * Because the description vector contains a mix of byte and word
+ * values, we declare it as an unsigned char array, and use this
+ * macro to put word values in.
+ */
+#define W(x) ((x) >> 24) & 0xff, ((x) >> 16) & 0xff, \
+ ((x) >> 8) & 0xff, (x) & 0xff
+
+/* Option vector bits - generic bits in byte 1 */
+#define OV_IGNORE 0x80 /* ignore this vector */
+#define OV_CESSATION_POLICY 0x40 /* halt if unsupported option present*/
+
+/* Option vector 1: processor architectures supported */
+#define OV1_PPC_2_00 0x80 /* set if we support PowerPC 2.00 */
+#define OV1_PPC_2_01 0x40 /* set if we support PowerPC 2.01 */
+#define OV1_PPC_2_02 0x20 /* set if we support PowerPC 2.02 */
+#define OV1_PPC_2_03 0x10 /* set if we support PowerPC 2.03 */
+#define OV1_PPC_2_04 0x08 /* set if we support PowerPC 2.04 */
+#define OV1_PPC_2_05 0x04 /* set if we support PowerPC 2.05 */
+
+/* Option vector 2: Open Firmware options supported */
+#define OV2_REAL_MODE 0x20 /* set if we want OF in real mode */
+
+/* Option vector 3: processor options supported */
+#define OV3_FP 0x80 /* floating point */
+#define OV3_VMX 0x40 /* VMX/Altivec */
+
+/* Option vector 5: PAPR/OF options supported */
+#define OV5_LPAR 0x80 /* logical partitioning supported */
+#define OV5_SPLPAR 0x40 /* shared-processor LPAR supported */
+/* ibm,dynamic-reconfiguration-memory property supported */
+#define OV5_DRCONF_MEMORY 0x20
+#define OV5_LARGE_PAGES 0x10 /* large pages supported */
+
+/*
+ * The architecture vector has an array of PVR mask/value pairs,
+ * followed by # option vectors - 1, followed by the option vectors.
+ */
+static unsigned char ibm_architecture_vec[] = {
+ W(0xfffe0000), W(0x003a0000), /* POWER5/POWER5+ */
+ W(0xffff0000), W(0x003e0000), /* POWER6 */
+ W(0xfffffffe), W(0x0f000001), /* all 2.04-compliant and earlier */
+ 5 - 1, /* 5 option vectors */
+
+ /* option vector 1: processor architectures supported */
+ 3 - 1, /* length */
+ 0, /* don't ignore, don't halt */
+ OV1_PPC_2_00 | OV1_PPC_2_01 | OV1_PPC_2_02 | OV1_PPC_2_03 |
+ OV1_PPC_2_04 | OV1_PPC_2_05,
+
+ /* option vector 2: Open Firmware options supported */
+ 34 - 1, /* length */
+ OV2_REAL_MODE,
+ 0, 0,
+ W(0xffffffff), /* real_base */
+ W(0xffffffff), /* real_size */
+ W(0xffffffff), /* virt_base */
+ W(0xffffffff), /* virt_size */
+ W(0xffffffff), /* load_base */
+ W(64), /* 128MB min RMA */
+ W(0xffffffff), /* full client load */
+ 0, /* min RMA percentage of total RAM */
+ 48, /* max log_2(hash table size) */
+
+ /* option vector 3: processor options supported */
+ 3 - 1, /* length */
+ 0, /* don't ignore, don't halt */
+ OV3_FP | OV3_VMX,
+
+ /* option vector 4: IBM PAPR implementation */
+ 2 - 1, /* length */
+ 0, /* don't halt */
+
+ /* option vector 5: PAPR/OF options */
+ 3 - 1, /* length */
+ 0, /* don't ignore, don't halt */
+ OV5_LPAR | OV5_SPLPAR | OV5_LARGE_PAGES,
+};
+
+/* Old method - ELF header with PT_NOTE sections */
static struct fake_elf {
Elf32_Ehdr elfhdr;
Elf32_Phdr phdr[2];
@@ -728,8 +814,26 @@ static struct fake_elf {
static void __init prom_send_capabilities(void)
{
- ihandle elfloader;
+ ihandle elfloader, root;
+ prom_arg_t ret;
+
+ root = call_prom("open", 1, 1, ADDR("/"));
+ if (root != 0) {
+ /* try calling the ibm,client-architecture-support method */
+ if (call_prom_ret("call-method", 3, 2, &ret,
+ ADDR("ibm,client-architecture-support"),
+ ADDR(ibm_architecture_vec)) == 0) {
+ /* the call exists... */
+ if (ret)
+ prom_printf("WARNING: ibm,client-architecture"
+ "-support call FAILED!\n");
+ call_prom("close", 1, 0, root);
+ return;
+ }
+ call_prom("close", 1, 0, root);
+ }
+ /* no ibm,client-architecture-support call, try the old way */
elfloader = call_prom("open", 1, 1, ADDR("/packages/elf-loader"));
if (elfloader == 0) {
prom_printf("couldn't open /packages/elf-loader\n");
@@ -1528,12 +1632,11 @@ static int __init prom_find_machine_type(void)
* non-IBM designs !
* - it has /rtas
*/
- len = prom_getprop(_prom->root, "model",
+ len = prom_getprop(_prom->root, "device_type",
compat, sizeof(compat)-1);
if (len <= 0)
return PLATFORM_GENERIC;
- compat[len] = 0;
- if (strcmp(compat, "chrp"))
+ if (strcmp(compat, RELOC("chrp")))
return PLATFORM_GENERIC;
/* Default to pSeries. We need to know if we are running LPAR */
@@ -1954,10 +2057,45 @@ static void __init flatten_device_tree(void)
}
-
-static void __init fixup_device_tree(void)
+#ifdef CONFIG_PPC_MAPLE
+/* PIBS Version 1.05.0000 04/26/2005 has an incorrect /ht/isa/ranges property.
+ * The values are bad, and it doesn't even have the right number of cells. */
+static void __init fixup_device_tree_maple(void)
{
+ phandle isa;
+ u32 isa_ranges[6];
+
+ isa = call_prom("finddevice", 1, 1, ADDR("/ht@0/isa@4"));
+ if (!PHANDLE_VALID(isa))
+ return;
+
+ if (prom_getprop(isa, "ranges", isa_ranges, sizeof(isa_ranges))
+ == PROM_ERROR)
+ return;
+
+ if (isa_ranges[0] != 0x1 ||
+ isa_ranges[1] != 0xf4000000 ||
+ isa_ranges[2] != 0x00010000)
+ return;
+
+ prom_printf("fixing up bogus ISA range on Maple...\n");
+
+ isa_ranges[0] = 0x1;
+ isa_ranges[1] = 0x0;
+ isa_ranges[2] = 0x01002000; /* IO space; PCI device = 4 */
+ isa_ranges[3] = 0x0;
+ isa_ranges[4] = 0x0;
+ isa_ranges[5] = 0x00010000;
+ prom_setprop(isa, "/ht@0/isa@4", "ranges",
+ isa_ranges, sizeof(isa_ranges));
+}
+#else
+#define fixup_device_tree_maple()
+#endif
+
#if defined(CONFIG_PPC64) && defined(CONFIG_PPC_PMAC)
+static void __init fixup_device_tree_pmac(void)
+{
phandle u3, i2c, mpic;
u32 u3_rev;
u32 interrupts[2];
@@ -1994,9 +2132,16 @@ static void __init fixup_device_tree(void)
parent = (u32)mpic;
prom_setprop(i2c, "/u3@0,f8000000/i2c@f8001000", "interrupt-parent",
&parent, sizeof(parent));
-#endif
}
+#else
+#define fixup_device_tree_pmac()
+#endif
+static void __init fixup_device_tree(void)
+{
+ fixup_device_tree_maple();
+ fixup_device_tree_pmac();
+}
static void __init prom_find_boot_cpu(void)
{
diff --git a/arch/powerpc/kernel/ptrace.c b/arch/powerpc/kernel/ptrace.c
index bcb83574335..4a677d1bd4e 100644
--- a/arch/powerpc/kernel/ptrace.c
+++ b/arch/powerpc/kernel/ptrace.c
@@ -538,7 +538,7 @@ void do_syscall_trace_enter(struct pt_regs *regs)
do_syscall_trace();
if (unlikely(current->audit_context))
- audit_syscall_entry(current,
+ audit_syscall_entry(
#ifdef CONFIG_PPC32
AUDIT_ARCH_PPC,
#else
@@ -556,8 +556,7 @@ void do_syscall_trace_leave(struct pt_regs *regs)
#endif
if (unlikely(current->audit_context))
- audit_syscall_exit(current,
- (regs->ccr&0x1000)?AUDITSC_FAILURE:AUDITSC_SUCCESS,
+ audit_syscall_exit((regs->ccr&0x1000)?AUDITSC_FAILURE:AUDITSC_SUCCESS,
regs->result);
if ((test_thread_flag(TIF_SYSCALL_TRACE)
diff --git a/arch/powerpc/kernel/rtas-proc.c b/arch/powerpc/kernel/rtas-proc.c
index 456286cf1d1..9c9ad1fa9cc 100644
--- a/arch/powerpc/kernel/rtas-proc.c
+++ b/arch/powerpc/kernel/rtas-proc.c
@@ -258,11 +258,11 @@ static int __init proc_rtas_init(void)
struct proc_dir_entry *entry;
if (!machine_is(pseries))
- return 1;
+ return -ENODEV;
rtas_node = of_find_node_by_name(NULL, "rtas");
if (rtas_node == NULL)
- return 1;
+ return -ENODEV;
entry = create_proc_entry("ppc64/rtas/progress", S_IRUGO|S_IWUSR, NULL);
if (entry)
diff --git a/arch/powerpc/kernel/setup-common.c b/arch/powerpc/kernel/setup-common.c
index 1d93e73a700..684ab1d49c6 100644
--- a/arch/powerpc/kernel/setup-common.c
+++ b/arch/powerpc/kernel/setup-common.c
@@ -516,3 +516,11 @@ void probe_machine(void)
printk(KERN_INFO "Using %s machine description\n", ppc_md.name);
}
+
+int check_legacy_ioport(unsigned long base_port)
+{
+ if (ppc_md.check_legacy_ioport == NULL)
+ return 0;
+ return ppc_md.check_legacy_ioport(base_port);
+}
+EXPORT_SYMBOL(check_legacy_ioport);
diff --git a/arch/powerpc/kernel/setup_64.c b/arch/powerpc/kernel/setup_64.c
index 13e91c4d70a..4467c49903b 100644
--- a/arch/powerpc/kernel/setup_64.c
+++ b/arch/powerpc/kernel/setup_64.c
@@ -594,14 +594,6 @@ void ppc64_terminate_msg(unsigned int src, const char *msg)
printk("[terminate]%04x %s\n", src, msg);
}
-int check_legacy_ioport(unsigned long base_port)
-{
- if (ppc_md.check_legacy_ioport == NULL)
- return 0;
- return ppc_md.check_legacy_ioport(base_port);
-}
-EXPORT_SYMBOL(check_legacy_ioport);
-
void cpu_die(void)
{
if (ppc_md.cpu_die)
diff --git a/arch/powerpc/kernel/sysfs.c b/arch/powerpc/kernel/sysfs.c
index 73560ef6f80..5bc2585c803 100644
--- a/arch/powerpc/kernel/sysfs.c
+++ b/arch/powerpc/kernel/sysfs.c
@@ -279,7 +279,7 @@ static void unregister_cpu_online(unsigned int cpu)
}
#endif /* CONFIG_HOTPLUG_CPU */
-static int __devinit sysfs_cpu_notify(struct notifier_block *self,
+static int sysfs_cpu_notify(struct notifier_block *self,
unsigned long action, void *hcpu)
{
unsigned int cpu = (unsigned int)(long)hcpu;
@@ -297,7 +297,7 @@ static int __devinit sysfs_cpu_notify(struct notifier_block *self,
return NOTIFY_OK;
}
-static struct notifier_block __devinitdata sysfs_cpu_nb = {
+static struct notifier_block sysfs_cpu_nb = {
.notifier_call = sysfs_cpu_notify,
};
@@ -322,13 +322,31 @@ static void register_nodes(void)
}
}
}
+
+int sysfs_add_device_to_node(struct sys_device *dev, int nid)
+{
+ struct node *node = &node_devices[nid];
+ return sysfs_create_link(&node->sysdev.kobj, &dev->kobj,
+ kobject_name(&dev->kobj));
+}
+
+void sysfs_remove_device_from_node(struct sys_device *dev, int nid)
+{
+ struct node *node = &node_devices[nid];
+ sysfs_remove_link(&node->sysdev.kobj, kobject_name(&dev->kobj));
+}
+
#else
static void register_nodes(void)
{
return;
}
+
#endif
+EXPORT_SYMBOL_GPL(sysfs_add_device_to_node);
+EXPORT_SYMBOL_GPL(sysfs_remove_device_from_node);
+
/* Only valid if CPU is present. */
static ssize_t show_physical_id(struct sys_device *dev, char *buf)
{
diff --git a/arch/powerpc/kernel/systbl.S b/arch/powerpc/kernel/systbl.S
index 1424eab450e..26ed1f5ef16 100644
--- a/arch/powerpc/kernel/systbl.S
+++ b/arch/powerpc/kernel/systbl.S
@@ -323,3 +323,25 @@ COMPAT_SYS(pselect6)
COMPAT_SYS(ppoll)
SYSCALL(unshare)
SYSCALL(splice)
+SYSCALL(tee)
+SYSCALL(vmsplice)
+COMPAT_SYS(openat)
+SYSCALL(mkdirat)
+SYSCALL(mknodat)
+SYSCALL(fchownat)
+COMPAT_SYS(futimesat)
+SYSX(sys_newfstatat, sys_fstatat64, sys_fstatat64)
+SYSCALL(unlinkat)
+SYSCALL(renameat)
+SYSCALL(linkat)
+SYSCALL(symlinkat)
+SYSCALL(readlinkat)
+SYSCALL(fchmodat)
+SYSCALL(faccessat)
+COMPAT_SYS(get_robust_list)
+COMPAT_SYS(set_robust_list)
+
+/*
+ * please add new calls to arch/powerpc/platforms/cell/spu_callbacks.c
+ * as well when appropriate.
+ */
diff --git a/arch/powerpc/kernel/vio.c b/arch/powerpc/kernel/vio.c
index 13c655ba284..971020cf3f7 100644
--- a/arch/powerpc/kernel/vio.c
+++ b/arch/powerpc/kernel/vio.c
@@ -202,7 +202,7 @@ static dma_addr_t vio_map_single(struct device *dev, void *vaddr,
size_t size, enum dma_data_direction direction)
{
return iommu_map_single(to_vio_dev(dev)->iommu_table, vaddr, size,
- direction);
+ ~0ul, direction);
}
static void vio_unmap_single(struct device *dev, dma_addr_t dma_handle,
@@ -216,7 +216,7 @@ static int vio_map_sg(struct device *dev, struct scatterlist *sglist,
int nelems, enum dma_data_direction direction)
{
return iommu_map_sg(dev, to_vio_dev(dev)->iommu_table, sglist,
- nelems, direction);
+ nelems, ~0ul, direction);
}
static void vio_unmap_sg(struct device *dev, struct scatterlist *sglist,
@@ -229,7 +229,7 @@ static void *vio_alloc_coherent(struct device *dev, size_t size,
dma_addr_t *dma_handle, gfp_t flag)
{
return iommu_alloc_coherent(to_vio_dev(dev)->iommu_table, size,
- dma_handle, flag);
+ dma_handle, ~0ul, flag);
}
static void vio_free_coherent(struct device *dev, size_t size,
diff --git a/arch/powerpc/mm/hugetlbpage.c b/arch/powerpc/mm/hugetlbpage.c
index 7370f9f33e2..266b8b2ceac 100644
--- a/arch/powerpc/mm/hugetlbpage.c
+++ b/arch/powerpc/mm/hugetlbpage.c
@@ -30,13 +30,66 @@
#define NUM_LOW_AREAS (0x100000000UL >> SID_SHIFT)
#define NUM_HIGH_AREAS (PGTABLE_RANGE >> HTLB_AREA_SHIFT)
+#ifdef CONFIG_PPC_64K_PAGES
+#define HUGEPTE_INDEX_SIZE (PMD_SHIFT-HPAGE_SHIFT)
+#else
+#define HUGEPTE_INDEX_SIZE (PUD_SHIFT-HPAGE_SHIFT)
+#endif
+#define PTRS_PER_HUGEPTE (1 << HUGEPTE_INDEX_SIZE)
+#define HUGEPTE_TABLE_SIZE (sizeof(pte_t) << HUGEPTE_INDEX_SIZE)
+
+#define HUGEPD_SHIFT (HPAGE_SHIFT + HUGEPTE_INDEX_SIZE)
+#define HUGEPD_SIZE (1UL << HUGEPD_SHIFT)
+#define HUGEPD_MASK (~(HUGEPD_SIZE-1))
+
+#define huge_pgtable_cache (pgtable_cache[HUGEPTE_CACHE_NUM])
+
+/* Flag to mark huge PD pointers. This means pmd_bad() and pud_bad()
+ * will choke on pointers to hugepte tables, which is handy for
+ * catching screwups early. */
+#define HUGEPD_OK 0x1
+
+typedef struct { unsigned long pd; } hugepd_t;
+
+#define hugepd_none(hpd) ((hpd).pd == 0)
+
+static inline pte_t *hugepd_page(hugepd_t hpd)
+{
+ BUG_ON(!(hpd.pd & HUGEPD_OK));
+ return (pte_t *)(hpd.pd & ~HUGEPD_OK);
+}
+
+static inline pte_t *hugepte_offset(hugepd_t *hpdp, unsigned long addr)
+{
+ unsigned long idx = ((addr >> HPAGE_SHIFT) & (PTRS_PER_HUGEPTE-1));
+ pte_t *dir = hugepd_page(*hpdp);
+
+ return dir + idx;
+}
+
+static int __hugepte_alloc(struct mm_struct *mm, hugepd_t *hpdp,
+ unsigned long address)
+{
+ pte_t *new = kmem_cache_alloc(huge_pgtable_cache,
+ GFP_KERNEL|__GFP_REPEAT);
+
+ if (! new)
+ return -ENOMEM;
+
+ spin_lock(&mm->page_table_lock);
+ if (!hugepd_none(*hpdp))
+ kmem_cache_free(huge_pgtable_cache, new);
+ else
+ hpdp->pd = (unsigned long)new | HUGEPD_OK;
+ spin_unlock(&mm->page_table_lock);
+ return 0;
+}
+
/* Modelled after find_linux_pte() */
pte_t *huge_pte_offset(struct mm_struct *mm, unsigned long addr)
{
pgd_t *pg;
pud_t *pu;
- pmd_t *pm;
- pte_t *pt;
BUG_ON(! in_hugepage_area(mm->context, addr));
@@ -46,26 +99,14 @@ pte_t *huge_pte_offset(struct mm_struct *mm, unsigned long addr)
if (!pgd_none(*pg)) {
pu = pud_offset(pg, addr);
if (!pud_none(*pu)) {
- pm = pmd_offset(pu, addr);
#ifdef CONFIG_PPC_64K_PAGES
- /* Currently, we use the normal PTE offset within full
- * size PTE pages, thus our huge PTEs are scattered in
- * the PTE page and we do waste some. We may change
- * that in the future, but the current mecanism keeps
- * things much simpler
- */
- if (!pmd_none(*pm)) {
- /* Note: pte_offset_* are all equivalent on
- * ppc64 as we don't have HIGHMEM
- */
- pt = pte_offset_kernel(pm, addr);
- return pt;
- }
-#else /* CONFIG_PPC_64K_PAGES */
- /* On 4k pages, we put huge PTEs in the PMD page */
- pt = (pte_t *)pm;
- return pt;
-#endif /* CONFIG_PPC_64K_PAGES */
+ pmd_t *pm;
+ pm = pmd_offset(pu, addr);
+ if (!pmd_none(*pm))
+ return hugepte_offset((hugepd_t *)pm, addr);
+#else
+ return hugepte_offset((hugepd_t *)pu, addr);
+#endif
}
}
@@ -76,8 +117,7 @@ pte_t *huge_pte_alloc(struct mm_struct *mm, unsigned long addr)
{
pgd_t *pg;
pud_t *pu;
- pmd_t *pm;
- pte_t *pt;
+ hugepd_t *hpdp = NULL;
BUG_ON(! in_hugepage_area(mm->context, addr));
@@ -87,23 +127,182 @@ pte_t *huge_pte_alloc(struct mm_struct *mm, unsigned long addr)
pu = pud_alloc(mm, pg, addr);
if (pu) {
+#ifdef CONFIG_PPC_64K_PAGES
+ pmd_t *pm;
pm = pmd_alloc(mm, pu, addr);
- if (pm) {
+ if (pm)
+ hpdp = (hugepd_t *)pm;
+#else
+ hpdp = (hugepd_t *)pu;
+#endif
+ }
+
+ if (! hpdp)
+ return NULL;
+
+ if (hugepd_none(*hpdp) && __hugepte_alloc(mm, hpdp, addr))
+ return NULL;
+
+ return hugepte_offset(hpdp, addr);
+}
+
+static void free_hugepte_range(struct mmu_gather *tlb, hugepd_t *hpdp)
+{
+ pte_t *hugepte = hugepd_page(*hpdp);
+
+ hpdp->pd = 0;
+ tlb->need_flush = 1;
+ pgtable_free_tlb(tlb, pgtable_free_cache(hugepte, HUGEPTE_CACHE_NUM,
+ HUGEPTE_TABLE_SIZE-1));
+}
+
#ifdef CONFIG_PPC_64K_PAGES
- /* See comment in huge_pte_offset. Note that if we ever
- * want to put the page size in the PMD, we would have
- * to open code our own pte_alloc* function in order
- * to populate and set the size atomically
- */
- pt = pte_alloc_map(mm, pm, addr);
-#else /* CONFIG_PPC_64K_PAGES */
- pt = (pte_t *)pm;
-#endif /* CONFIG_PPC_64K_PAGES */
- return pt;
- }
+static void hugetlb_free_pmd_range(struct mmu_gather *tlb, pud_t *pud,
+ unsigned long addr, unsigned long end,
+ unsigned long floor, unsigned long ceiling)
+{
+ pmd_t *pmd;
+ unsigned long next;
+ unsigned long start;
+
+ start = addr;
+ pmd = pmd_offset(pud, addr);
+ do {
+ next = pmd_addr_end(addr, end);
+ if (pmd_none(*pmd))
+ continue;
+ free_hugepte_range(tlb, (hugepd_t *)pmd);
+ } while (pmd++, addr = next, addr != end);
+
+ start &= PUD_MASK;
+ if (start < floor)
+ return;
+ if (ceiling) {
+ ceiling &= PUD_MASK;
+ if (!ceiling)
+ return;
}
+ if (end - 1 > ceiling - 1)
+ return;
- return NULL;
+ pmd = pmd_offset(pud, start);
+ pud_clear(pud);
+ pmd_free_tlb(tlb, pmd);
+}
+#endif
+
+static void hugetlb_free_pud_range(struct mmu_gather *tlb, pgd_t *pgd,
+ unsigned long addr, unsigned long end,
+ unsigned long floor, unsigned long ceiling)
+{
+ pud_t *pud;
+ unsigned long next;
+ unsigned long start;
+
+ start = addr;
+ pud = pud_offset(pgd, addr);
+ do {
+ next = pud_addr_end(addr, end);
+#ifdef CONFIG_PPC_64K_PAGES
+ if (pud_none_or_clear_bad(pud))
+ continue;
+ hugetlb_free_pmd_range(tlb, pud, addr, next, floor, ceiling);
+#else
+ if (pud_none(*pud))
+ continue;
+ free_hugepte_range(tlb, (hugepd_t *)pud);
+#endif
+ } while (pud++, addr = next, addr != end);
+
+ start &= PGDIR_MASK;
+ if (start < floor)
+ return;
+ if (ceiling) {
+ ceiling &= PGDIR_MASK;
+ if (!ceiling)
+ return;
+ }
+ if (end - 1 > ceiling - 1)
+ return;
+
+ pud = pud_offset(pgd, start);
+ pgd_clear(pgd);
+ pud_free_tlb(tlb, pud);
+}
+
+/*
+ * This function frees user-level page tables of a process.
+ *
+ * Must be called with pagetable lock held.
+ */
+void hugetlb_free_pgd_range(struct mmu_gather **tlb,
+ unsigned long addr, unsigned long end,
+ unsigned long floor, unsigned long ceiling)
+{
+ pgd_t *pgd;
+ unsigned long next;
+ unsigned long start;
+
+ /*
+ * Comments below take from the normal free_pgd_range(). They
+ * apply here too. The tests against HUGEPD_MASK below are
+ * essential, because we *don't* test for this at the bottom
+ * level. Without them we'll attempt to free a hugepte table
+ * when we unmap just part of it, even if there are other
+ * active mappings using it.
+ *
+ * The next few lines have given us lots of grief...
+ *
+ * Why are we testing HUGEPD* at this top level? Because
+ * often there will be no work to do at all, and we'd prefer
+ * not to go all the way down to the bottom just to discover
+ * that.
+ *
+ * Why all these "- 1"s? Because 0 represents both the bottom
+ * of the address space and the top of it (using -1 for the
+ * top wouldn't help much: the masks would do the wrong thing).
+ * The rule is that addr 0 and floor 0 refer to the bottom of
+ * the address space, but end 0 and ceiling 0 refer to the top
+ * Comparisons need to use "end - 1" and "ceiling - 1" (though
+ * that end 0 case should be mythical).
+ *
+ * Wherever addr is brought up or ceiling brought down, we
+ * must be careful to reject "the opposite 0" before it
+ * confuses the subsequent tests. But what about where end is
+ * brought down by HUGEPD_SIZE below? no, end can't go down to
+ * 0 there.
+ *
+ * Whereas we round start (addr) and ceiling down, by different
+ * masks at different levels, in order to test whether a table
+ * now has no other vmas using it, so can be freed, we don't
+ * bother to round floor or end up - the tests don't need that.
+ */
+
+ addr &= HUGEPD_MASK;
+ if (addr < floor) {
+ addr += HUGEPD_SIZE;
+ if (!addr)
+ return;
+ }
+ if (ceiling) {
+ ceiling &= HUGEPD_MASK;
+ if (!ceiling)
+ return;
+ }
+ if (end - 1 > ceiling - 1)
+ end -= HUGEPD_SIZE;
+ if (addr > end - 1)
+ return;
+
+ start = addr;
+ pgd = pgd_offset((*tlb)->mm, addr);
+ do {
+ BUG_ON(! in_hugepage_area((*tlb)->mm->context, addr));
+ next = pgd_addr_end(addr, end);
+ if (pgd_none_or_clear_bad(pgd))
+ continue;
+ hugetlb_free_pud_range(*tlb, pgd, addr, next, floor, ceiling);
+ } while (pgd++, addr = next, addr != end);
}
void set_huge_pte_at(struct mm_struct *mm, unsigned long addr,
@@ -841,3 +1040,27 @@ repeat:
out:
return err;
}
+
+static void zero_ctor(void *addr, kmem_cache_t *cache, unsigned long flags)
+{
+ memset(addr, 0, kmem_cache_size(cache));
+}
+
+static int __init hugetlbpage_init(void)
+{
+ if (!cpu_has_feature(CPU_FTR_16M_PAGE))
+ return -ENODEV;
+
+ huge_pgtable_cache = kmem_cache_create("hugepte_cache",
+ HUGEPTE_TABLE_SIZE,
+ HUGEPTE_TABLE_SIZE,
+ SLAB_HWCACHE_ALIGN |
+ SLAB_MUST_HWCACHE_ALIGN,
+ zero_ctor, NULL);
+ if (! huge_pgtable_cache)
+ panic("hugetlbpage_init(): could not create hugepte cache\n");
+
+ return 0;
+}
+
+module_init(hugetlbpage_init);
diff --git a/arch/powerpc/mm/init_64.c b/arch/powerpc/mm/init_64.c
index babebd15bdc..9e30f968c18 100644
--- a/arch/powerpc/mm/init_64.c
+++ b/arch/powerpc/mm/init_64.c
@@ -162,7 +162,14 @@ static const char *pgtable_cache_name[ARRAY_SIZE(pgtable_cache_size)] = {
};
#endif /* CONFIG_PPC_64K_PAGES */
+#ifdef CONFIG_HUGETLB_PAGE
+/* Hugepages need one extra cache, initialized in hugetlbpage.c. We
+ * can't put into the tables above, because HPAGE_SHIFT is not compile
+ * time constant. */
+kmem_cache_t *pgtable_cache[ARRAY_SIZE(pgtable_cache_size)+1];
+#else
kmem_cache_t *pgtable_cache[ARRAY_SIZE(pgtable_cache_size)];
+#endif
void pgtable_cache_init(void)
{
diff --git a/arch/powerpc/mm/numa.c b/arch/powerpc/mm/numa.c
index 0a335f34974..092355f3739 100644
--- a/arch/powerpc/mm/numa.c
+++ b/arch/powerpc/mm/numa.c
@@ -194,7 +194,7 @@ static int *of_get_associativity(struct device_node *dev)
/* Returns nid in the range [0..MAX_NUMNODES-1], or -1 if no useful numa
* info is found.
*/
-static int of_node_to_nid(struct device_node *device)
+static int of_node_to_nid_single(struct device_node *device)
{
int nid = -1;
unsigned int *tmp;
@@ -216,6 +216,28 @@ out:
return nid;
}
+/* Walk the device tree upwards, looking for an associativity id */
+int of_node_to_nid(struct device_node *device)
+{
+ struct device_node *tmp;
+ int nid = -1;
+
+ of_node_get(device);
+ while (device) {
+ nid = of_node_to_nid_single(device);
+ if (nid != -1)
+ break;
+
+ tmp = device;
+ device = of_get_parent(tmp);
+ of_node_put(tmp);
+ }
+ of_node_put(device);
+
+ return nid;
+}
+EXPORT_SYMBOL_GPL(of_node_to_nid);
+
/*
* In theory, the "ibm,associativity" property may contain multiple
* associativity lists because a resource may be multiply connected
@@ -300,7 +322,7 @@ static int __cpuinit numa_setup_cpu(unsigned long lcpu)
goto out;
}
- nid = of_node_to_nid(cpu);
+ nid = of_node_to_nid_single(cpu);
if (nid < 0 || !node_online(nid))
nid = any_online_node(NODE_MASK_ALL);
@@ -393,7 +415,7 @@ static int __init parse_numa_properties(void)
cpu = find_cpu_node(i);
BUG_ON(!cpu);
- nid = of_node_to_nid(cpu);
+ nid = of_node_to_nid_single(cpu);
of_node_put(cpu);
/*
@@ -437,7 +459,7 @@ new_range:
* have associativity properties. If none, then
* everything goes to default_nid.
*/
- nid = of_node_to_nid(memory);
+ nid = of_node_to_nid_single(memory);
if (nid < 0)
nid = default_nid;
node_set_online(nid);
@@ -776,7 +798,7 @@ int hot_add_scn_to_nid(unsigned long scn_addr)
ha_new_range:
start = read_n_cells(n_mem_addr_cells, &memcell_buf);
size = read_n_cells(n_mem_size_cells, &memcell_buf);
- nid = of_node_to_nid(memory);
+ nid = of_node_to_nid_single(memory);
/* Domains not present at boot default to 0 */
if (nid < 0 || !node_online(nid))
diff --git a/arch/powerpc/platforms/cell/Kconfig b/arch/powerpc/platforms/cell/Kconfig
index c2a3db8edb0..6a02d51086c 100644
--- a/arch/powerpc/platforms/cell/Kconfig
+++ b/arch/powerpc/platforms/cell/Kconfig
@@ -12,7 +12,8 @@ config SPU_FS
config SPUFS_MMAP
bool
- depends on SPU_FS && SPARSEMEM && !PPC_64K_PAGES
+ depends on SPU_FS && SPARSEMEM
+ select MEMORY_HOTPLUG
default y
endmenu
diff --git a/arch/powerpc/platforms/cell/setup.c b/arch/powerpc/platforms/cell/setup.c
index dac5d0365fd..6574b22b3cf 100644
--- a/arch/powerpc/platforms/cell/setup.c
+++ b/arch/powerpc/platforms/cell/setup.c
@@ -29,6 +29,8 @@
#include <linux/seq_file.h>
#include <linux/root_dev.h>
#include <linux/console.h>
+#include <linux/mutex.h>
+#include <linux/memory_hotplug.h>
#include <asm/mmu.h>
#include <asm/processor.h>
@@ -46,6 +48,7 @@
#include <asm/cputable.h>
#include <asm/ppc-pci.h>
#include <asm/irq.h>
+#include <asm/spu.h>
#include "interrupt.h"
#include "iommu.h"
@@ -69,77 +72,6 @@ static void cell_show_cpuinfo(struct seq_file *m)
of_node_put(root);
}
-#ifdef CONFIG_SPARSEMEM
-static int __init find_spu_node_id(struct device_node *spe)
-{
- unsigned int *id;
-#ifdef CONFIG_NUMA
- struct device_node *cpu;
- cpu = spe->parent->parent;
- id = (unsigned int *)get_property(cpu, "node-id", NULL);
-#else
- id = NULL;
-#endif
- return id ? *id : 0;
-}
-
-static void __init cell_spuprop_present(struct device_node *spe,
- const char *prop, int early)
-{
- struct address_prop {
- unsigned long address;
- unsigned int len;
- } __attribute__((packed)) *p;
- int proplen;
-
- unsigned long start_pfn, end_pfn, pfn;
- int node_id;
-
- p = (void*)get_property(spe, prop, &proplen);
- WARN_ON(proplen != sizeof (*p));
-
- node_id = find_spu_node_id(spe);
-
- start_pfn = p->address >> PAGE_SHIFT;
- end_pfn = (p->address + p->len + PAGE_SIZE - 1) >> PAGE_SHIFT;
-
- /* We need to call memory_present *before* the call to sparse_init,
- but we can initialize the page structs only *after* that call.
- Thus, we're being called twice. */
- if (early)
- memory_present(node_id, start_pfn, end_pfn);
- else {
- /* As the pages backing SPU LS and I/O are outside the range
- of regular memory, their page structs were not initialized
- by free_area_init. Do it here instead. */
- for (pfn = start_pfn; pfn < end_pfn; pfn++) {
- struct page *page = pfn_to_page(pfn);
- set_page_links(page, ZONE_DMA, node_id, pfn);
- init_page_count(page);
- reset_page_mapcount(page);
- SetPageReserved(page);
- INIT_LIST_HEAD(&page->lru);
- }
- }
-}
-
-static void __init cell_spumem_init(int early)
-{
- struct device_node *node;
- for (node = of_find_node_by_type(NULL, "spe");
- node; node = of_find_node_by_type(node, "spe")) {
- cell_spuprop_present(node, "local-store", early);
- cell_spuprop_present(node, "problem", early);
- cell_spuprop_present(node, "priv1", early);
- cell_spuprop_present(node, "priv2", early);
- }
-}
-#else
-static void __init cell_spumem_init(int early)
-{
-}
-#endif
-
static void cell_progress(char *s, unsigned short hex)
{
printk("*** %04x : %s\n", hex, s ? s : "");
@@ -172,8 +104,6 @@ static void __init cell_setup_arch(void)
#endif
mmio_nvram_init();
-
- cell_spumem_init(0);
}
/*
@@ -189,8 +119,6 @@ static void __init cell_init_early(void)
ppc64_interrupt_controller = IC_CELL_PIC;
- cell_spumem_init(1);
-
DBG(" <- cell_init_early()\n");
}
diff --git a/arch/powerpc/platforms/cell/spu_base.c b/arch/powerpc/platforms/cell/spu_base.c
index 269dda4fd0b..ad141fe8d52 100644
--- a/arch/powerpc/platforms/cell/spu_base.c
+++ b/arch/powerpc/platforms/cell/spu_base.c
@@ -306,19 +306,19 @@ spu_request_irqs(struct spu *spu)
snprintf(spu->irq_c0, sizeof (spu->irq_c0), "spe%02d.0", spu->number);
ret = request_irq(irq_base + spu->isrc,
- spu_irq_class_0, 0, spu->irq_c0, spu);
+ spu_irq_class_0, SA_INTERRUPT, spu->irq_c0, spu);
if (ret)
goto out;
snprintf(spu->irq_c1, sizeof (spu->irq_c1), "spe%02d.1", spu->number);
ret = request_irq(irq_base + IIC_CLASS_STRIDE + spu->isrc,
- spu_irq_class_1, 0, spu->irq_c1, spu);
+ spu_irq_class_1, SA_INTERRUPT, spu->irq_c1, spu);
if (ret)
goto out1;
snprintf(spu->irq_c2, sizeof (spu->irq_c2), "spe%02d.2", spu->number);
ret = request_irq(irq_base + 2*IIC_CLASS_STRIDE + spu->isrc,
- spu_irq_class_2, 0, spu->irq_c2, spu);
+ spu_irq_class_2, SA_INTERRUPT, spu->irq_c2, spu);
if (ret)
goto out2;
goto out;
@@ -487,10 +487,14 @@ int spu_irq_class_1_bottom(struct spu *spu)
ea = spu->dar;
dsisr = spu->dsisr;
if (dsisr & (MFC_DSISR_PTE_NOT_FOUND | MFC_DSISR_ACCESS_DENIED)) {
+ u64 flags;
+
access = (_PAGE_PRESENT | _PAGE_USER);
access |= (dsisr & MFC_DSISR_ACCESS_PUT) ? _PAGE_RW : 0UL;
+ local_irq_save(flags);
if (hash_page(ea, access, 0x300) != 0)
error |= CLASS1_ENABLE_STORAGE_FAULT_INTR;
+ local_irq_restore(flags);
}
if (error & CLASS1_ENABLE_STORAGE_FAULT_INTR) {
if ((ret = spu_handle_mm_fault(spu)) != 0)
@@ -516,8 +520,50 @@ void spu_irq_setaffinity(struct spu *spu, int cpu)
}
EXPORT_SYMBOL_GPL(spu_irq_setaffinity);
-static void __iomem * __init map_spe_prop(struct device_node *n,
- const char *name)
+static int __init find_spu_node_id(struct device_node *spe)
+{
+ unsigned int *id;
+ struct device_node *cpu;
+ cpu = spe->parent->parent;
+ id = (unsigned int *)get_property(cpu, "node-id", NULL);
+ return id ? *id : 0;
+}
+
+static int __init cell_spuprop_present(struct spu *spu, struct device_node *spe,
+ const char *prop)
+{
+ static DEFINE_MUTEX(add_spumem_mutex);
+
+ struct address_prop {
+ unsigned long address;
+ unsigned int len;
+ } __attribute__((packed)) *p;
+ int proplen;
+
+ unsigned long start_pfn, nr_pages;
+ struct pglist_data *pgdata;
+ struct zone *zone;
+ int ret;
+
+ p = (void*)get_property(spe, prop, &proplen);
+ WARN_ON(proplen != sizeof (*p));
+
+ start_pfn = p->address >> PAGE_SHIFT;
+ nr_pages = ((unsigned long)p->len + PAGE_SIZE - 1) >> PAGE_SHIFT;
+
+ pgdata = NODE_DATA(spu->nid);
+ zone = pgdata->node_zones;
+
+ /* XXX rethink locking here */
+ mutex_lock(&add_spumem_mutex);
+ ret = __add_pages(zone, start_pfn, nr_pages);
+ mutex_unlock(&add_spumem_mutex);
+
+ return ret;
+}
+
+static void __iomem * __init map_spe_prop(struct spu *spu,
+ struct device_node *n, const char *name)
{
struct address_prop {
unsigned long address;
@@ -526,6 +572,8 @@ static void __iomem * __init map_spe_prop(struct device_node *n,
void *p;
int proplen;
+ void* ret = NULL;
+ int err = 0;
p = get_property(n, name, &proplen);
if (proplen != sizeof (struct address_prop))
@@ -533,7 +581,14 @@ static void __iomem * __init map_spe_prop(struct device_node *n,
prop = p;
- return ioremap(prop->address, prop->len);
+ err = cell_spuprop_present(spu, n, name);
+ if (err && (err != -EEXIST))
+ goto out;
+
+ ret = ioremap(prop->address, prop->len);
+
+ out:
+ return ret;
}
static void spu_unmap(struct spu *spu)
@@ -544,44 +599,45 @@ static void spu_unmap(struct spu *spu)
iounmap((u8 __iomem *)spu->local_store);
}
-static int __init spu_map_device(struct spu *spu, struct device_node *spe)
+static int __init spu_map_device(struct spu *spu, struct device_node *node)
{
char *prop;
int ret;
ret = -ENODEV;
- prop = get_property(spe, "isrc", NULL);
+ prop = get_property(node, "isrc", NULL);
if (!prop)
goto out;
spu->isrc = *(unsigned int *)prop;
- spu->name = get_property(spe, "name", NULL);
+ spu->name = get_property(node, "name", NULL);
if (!spu->name)
goto out;
- prop = get_property(spe, "local-store", NULL);
+ prop = get_property(node, "local-store", NULL);
if (!prop)
goto out;
spu->local_store_phys = *(unsigned long *)prop;
/* we use local store as ram, not io memory */
- spu->local_store = (void __force *)map_spe_prop(spe, "local-store");
+ spu->local_store = (void __force *)
+ map_spe_prop(spu, node, "local-store");
if (!spu->local_store)
goto out;
- prop = get_property(spe, "problem", NULL);
+ prop = get_property(node, "problem", NULL);
if (!prop)
goto out_unmap;
spu->problem_phys = *(unsigned long *)prop;
- spu->problem= map_spe_prop(spe, "problem");
+ spu->problem= map_spe_prop(spu, node, "problem");
if (!spu->problem)
goto out_unmap;
- spu->priv1= map_spe_prop(spe, "priv1");
+ spu->priv1= map_spe_prop(spu, node, "priv1");
/* priv1 is not available on a hypervisor */
- spu->priv2= map_spe_prop(spe, "priv2");
+ spu->priv2= map_spe_prop(spu, node, "priv2");
if (!spu->priv2)
goto out_unmap;
ret = 0;
@@ -593,17 +649,6 @@ out:
return ret;
}
-static int __init find_spu_node_id(struct device_node *spe)
-{
- unsigned int *id;
- struct device_node *cpu;
-
- cpu = spe->parent->parent;
- id = (unsigned int *)get_property(cpu, "node-id", NULL);
-
- return id ? *id : 0;
-}
-
static int __init create_spu(struct device_node *spe)
{
struct spu *spu;
@@ -620,6 +665,10 @@ static int __init create_spu(struct device_node *spe)
goto out_free;
spu->node = find_spu_node_id(spe);
+ spu->nid = of_node_to_nid(spe);
+ if (spu->nid == -1)
+ spu->nid = 0;
+
spu->stop_code = 0;
spu->slb_replace = 0;
spu->mm = NULL;
diff --git a/arch/powerpc/platforms/cell/spu_callbacks.c b/arch/powerpc/platforms/cell/spu_callbacks.c
index 6594bec7388..b47fcc5ddb7 100644
--- a/arch/powerpc/platforms/cell/spu_callbacks.c
+++ b/arch/powerpc/platforms/cell/spu_callbacks.c
@@ -258,6 +258,7 @@ void *spu_syscall_table[] = {
[__NR_futex] sys_futex,
[__NR_sched_setaffinity] sys_sched_setaffinity,
[__NR_sched_getaffinity] sys_sched_getaffinity,
+ [224] sys_ni_syscall,
[__NR_tuxcall] sys_ni_syscall,
[226] sys_ni_syscall,
[__NR_io_setup] sys_io_setup,
@@ -317,21 +318,36 @@ void *spu_syscall_table[] = {
[__NR_ppoll] sys_ni_syscall, /* sys_ppoll */
[__NR_unshare] sys_unshare,
[__NR_splice] sys_splice,
+ [__NR_tee] sys_tee,
+ [__NR_vmsplice] sys_vmsplice,
+ [__NR_openat] sys_openat,
+ [__NR_mkdirat] sys_mkdirat,
+ [__NR_mknodat] sys_mknodat,
+ [__NR_fchownat] sys_fchownat,
+ [__NR_futimesat] sys_futimesat,
+ [__NR_newfstatat] sys_newfstatat,
+ [__NR_unlinkat] sys_unlinkat,
+ [__NR_renameat] sys_renameat,
+ [__NR_linkat] sys_linkat,
+ [__NR_symlinkat] sys_symlinkat,
+ [__NR_readlinkat] sys_readlinkat,
+ [__NR_fchmodat] sys_fchmodat,
+ [__NR_faccessat] sys_faccessat,
+ [__NR_get_robust_list] sys_get_robust_list,
+ [__NR_set_robust_list] sys_set_robust_list,
};
long spu_sys_callback(struct spu_syscall_block *s)
{
long (*syscall)(u64 a1, u64 a2, u64 a3, u64 a4, u64 a5, u64 a6);
- BUILD_BUG_ON(ARRAY_SIZE(spu_syscall_table) != __NR_syscalls);
-
- syscall = spu_syscall_table[s->nr_ret];
-
- if (s->nr_ret >= __NR_syscalls) {
+ if (s->nr_ret >= ARRAY_SIZE(spu_syscall_table)) {
pr_debug("%s: invalid syscall #%ld", __FUNCTION__, s->nr_ret);
return -ENOSYS;
}
+ syscall = spu_syscall_table[s->nr_ret];
+
#ifdef DEBUG
print_symbol(KERN_DEBUG "SPU-syscall %s:", (unsigned long)syscall);
printk("syscall%ld(%lx, %lx, %lx, %lx, %lx, %lx)\n",
diff --git a/arch/powerpc/platforms/cell/spufs/switch.c b/arch/powerpc/platforms/cell/spufs/switch.c
index 97898d5d34e..1726bfe38ee 100644
--- a/arch/powerpc/platforms/cell/spufs/switch.c
+++ b/arch/powerpc/platforms/cell/spufs/switch.c
@@ -1297,7 +1297,7 @@ static inline void setup_decr(struct spu_state *csa, struct spu *spu)
cycles_t resume_time = get_cycles();
cycles_t delta_time = resume_time - csa->suspend_time;
- csa->lscsa->decr.slot[0] = delta_time;
+ csa->lscsa->decr.slot[0] -= delta_time;
}
}
diff --git a/arch/powerpc/platforms/chrp/chrp.h b/arch/powerpc/platforms/chrp/chrp.h
index 63f0aee4c15..996c28744e9 100644
--- a/arch/powerpc/platforms/chrp/chrp.h
+++ b/arch/powerpc/platforms/chrp/chrp.h
@@ -9,3 +9,4 @@ extern long chrp_time_init(void);
extern void chrp_find_bridges(void);
extern void chrp_event_scan(unsigned long);
+extern void chrp_pcibios_fixup(void);
diff --git a/arch/powerpc/platforms/chrp/pci.c b/arch/powerpc/platforms/chrp/pci.c
index 8ef279ad36a..ac224876ce5 100644
--- a/arch/powerpc/platforms/chrp/pci.c
+++ b/arch/powerpc/platforms/chrp/pci.c
@@ -23,6 +23,8 @@
#include <asm/grackle.h>
#include <asm/rtas.h>
+#include "chrp.h"
+
/* LongTrail */
void __iomem *gg2_pci_config_base;
@@ -314,6 +316,6 @@ chrp_find_bridges(void)
}
/* Do not fixup interrupts from OF tree on pegasos */
- if (is_pegasos == 0)
- ppc_md.pcibios_fixup = chrp_pcibios_fixup;
+ if (is_pegasos)
+ ppc_md.pcibios_fixup = NULL;
}
diff --git a/arch/powerpc/platforms/chrp/setup.c b/arch/powerpc/platforms/chrp/setup.c
index 23a20171870..18d89f38796 100644
--- a/arch/powerpc/platforms/chrp/setup.c
+++ b/arch/powerpc/platforms/chrp/setup.c
@@ -440,8 +440,6 @@ void __init chrp_init_IRQ(void)
if (_chrp_type == _CHRP_Pegasos)
ppc_md.get_irq = i8259_irq;
- else
- ppc_md.get_irq = mpic_get_irq;
#if defined(CONFIG_VT) && defined(CONFIG_INPUT_ADBHID) && defined(XMON)
/* see if there is a keyboard in the device tree
@@ -528,26 +526,24 @@ static int __init chrp_probe(void)
/* Assume we have an 8259... */
__irq_offset_value = NUM_ISA_INTERRUPTS;
- ppc_md.setup_arch = chrp_setup_arch;
- ppc_md.show_cpuinfo = chrp_show_cpuinfo;
-
- ppc_md.init_IRQ = chrp_init_IRQ;
- ppc_md.init = chrp_init2;
-
- ppc_md.phys_mem_access_prot = pci_phys_mem_access_prot;
-
- ppc_md.restart = rtas_restart;
- ppc_md.power_off = rtas_power_off;
- ppc_md.halt = rtas_halt;
-
- ppc_md.time_init = chrp_time_init;
- ppc_md.calibrate_decr = generic_calibrate_decr;
-
- /* this may get overridden with rtas routines later... */
- ppc_md.set_rtc_time = chrp_set_rtc_time;
- ppc_md.get_rtc_time = chrp_get_rtc_time;
-
-#ifdef CONFIG_SMP
- smp_ops = &chrp_smp_ops;
-#endif /* CONFIG_SMP */
+ return 1;
}
+
+define_machine(chrp) {
+ .name = "CHRP",
+ .probe = chrp_probe,
+ .setup_arch = chrp_setup_arch,
+ .init = chrp_init2,
+ .show_cpuinfo = chrp_show_cpuinfo,
+ .init_IRQ = chrp_init_IRQ,
+ .get_irq = mpic_get_irq,
+ .pcibios_fixup = chrp_pcibios_fixup,
+ .restart = rtas_restart,
+ .power_off = rtas_power_off,
+ .halt = rtas_halt,
+ .time_init = chrp_time_init,
+ .set_rtc_time = chrp_set_rtc_time,
+ .get_rtc_time = chrp_get_rtc_time,
+ .calibrate_decr = generic_calibrate_decr,
+ .phys_mem_access_prot = pci_phys_mem_access_prot,
+};
diff --git a/arch/powerpc/platforms/iseries/setup.c b/arch/powerpc/platforms/iseries/setup.c
index 6ce8a404ba6..a6fd9bedb07 100644
--- a/arch/powerpc/platforms/iseries/setup.c
+++ b/arch/powerpc/platforms/iseries/setup.c
@@ -54,6 +54,7 @@
#include <asm/iseries/hv_lp_event.h>
#include <asm/iseries/lpar_map.h>
#include <asm/udbg.h>
+#include <asm/irq.h>
#include "naca.h"
#include "setup.h"
@@ -684,6 +685,12 @@ static int __init iseries_probe(void)
powerpc_firmware_features |= FW_FEATURE_ISERIES;
powerpc_firmware_features |= FW_FEATURE_LPAR;
+ /*
+ * The Hypervisor only allows us up to 256 interrupt
+ * sources (the irq number is passed in a u8).
+ */
+ virt_irq_max = 255;
+
return 1;
}
diff --git a/arch/powerpc/platforms/powermac/low_i2c.c b/arch/powerpc/platforms/powermac/low_i2c.c
index e14f9ac55cf..c896ce83d41 100644
--- a/arch/powerpc/platforms/powermac/low_i2c.c
+++ b/arch/powerpc/platforms/powermac/low_i2c.c
@@ -231,6 +231,14 @@ static u8 kw_i2c_wait_interrupt(struct pmac_i2c_host_kw *host)
return isr;
}
+static void kw_i2c_do_stop(struct pmac_i2c_host_kw *host, int result)
+{
+ kw_write_reg(reg_control, KW_I2C_CTL_STOP);
+ host->state = state_stop;
+ host->result = result;
+}
+
+
static void kw_i2c_handle_interrupt(struct pmac_i2c_host_kw *host, u8 isr)
{
u8 ack;
@@ -246,42 +254,36 @@ static void kw_i2c_handle_interrupt(struct pmac_i2c_host_kw *host, u8 isr)
}
if (isr == 0) {
+ printk(KERN_WARNING "low_i2c: Timeout in i2c transfer"
+ " on keywest !\n");
if (host->state != state_stop) {
- DBG_LOW("KW: Timeout !\n");
- host->result = -EIO;
- goto stop;
- }
- if (host->state == state_stop) {
- ack = kw_read_reg(reg_status);
- if (ack & KW_I2C_STAT_BUSY)
- kw_write_reg(reg_status, 0);
- host->state = state_idle;
- kw_write_reg(reg_ier, 0x00);
- if (!host->polled)
- complete(&host->complete);
+ kw_i2c_do_stop(host, -EIO);
+ return;
}
+ ack = kw_read_reg(reg_status);
+ if (ack & KW_I2C_STAT_BUSY)
+ kw_write_reg(reg_status, 0);
+ host->state = state_idle;
+ kw_write_reg(reg_ier, 0x00);
+ if (!host->polled)
+ complete(&host->complete);
return;
}
if (isr & KW_I2C_IRQ_ADDR) {
ack = kw_read_reg(reg_status);
if (host->state != state_addr) {
- kw_write_reg(reg_isr, KW_I2C_IRQ_ADDR);
WRONG_STATE("KW_I2C_IRQ_ADDR");
- host->result = -EIO;
- goto stop;
+ kw_i2c_do_stop(host, -EIO);
}
if ((ack & KW_I2C_STAT_LAST_AAK) == 0) {
- host->result = -ENODEV;
- DBG_LOW("KW: NAK on address\n");
+ host->result = -ENXIO;
host->state = state_stop;
- return;
+ DBG_LOW("KW: NAK on address\n");
} else {
- if (host->len == 0) {
- kw_write_reg(reg_isr, KW_I2C_IRQ_ADDR);
- goto stop;
- }
- if (host->rw) {
+ if (host->len == 0)
+ kw_i2c_do_stop(host, 0);
+ else if (host->rw) {
host->state = state_read;
if (host->len > 1)
kw_write_reg(reg_control,
@@ -308,25 +310,19 @@ static void kw_i2c_handle_interrupt(struct pmac_i2c_host_kw *host, u8 isr)
ack = kw_read_reg(reg_status);
if ((ack & KW_I2C_STAT_LAST_AAK) == 0) {
DBG_LOW("KW: nack on data write\n");
- host->result = -EIO;
- goto stop;
+ host->result = -EFBIG;
+ host->state = state_stop;
} else if (host->len) {
kw_write_reg(reg_data, *(host->data++));
host->len--;
- } else {
- kw_write_reg(reg_control, KW_I2C_CTL_STOP);
- host->state = state_stop;
- host->result = 0;
- }
- kw_write_reg(reg_isr, KW_I2C_IRQ_DATA);
+ } else
+ kw_i2c_do_stop(host, 0);
} else {
- kw_write_reg(reg_isr, KW_I2C_IRQ_DATA);
WRONG_STATE("KW_I2C_IRQ_DATA");
- if (host->state != state_stop) {
- host->result = -EIO;
- goto stop;
- }
+ if (host->state != state_stop)
+ kw_i2c_do_stop(host, -EIO);
}
+ kw_write_reg(reg_isr, KW_I2C_IRQ_DATA);
}
if (isr & KW_I2C_IRQ_STOP) {
@@ -340,14 +336,10 @@ static void kw_i2c_handle_interrupt(struct pmac_i2c_host_kw *host, u8 isr)
complete(&host->complete);
}
+ /* Below should only happen in manual mode which we don't use ... */
if (isr & KW_I2C_IRQ_START)
kw_write_reg(reg_isr, KW_I2C_IRQ_START);
- return;
- stop:
- kw_write_reg(reg_control, KW_I2C_CTL_STOP);
- host->state = state_stop;
- return;
}
/* Interrupt handler */
@@ -544,11 +536,11 @@ static struct pmac_i2c_host_kw *__init kw_i2c_host_init(struct device_node *np)
return NULL;
}
- /* Make sure IRA is disabled */
+ /* Make sure IRQ is disabled */
kw_write_reg(reg_ier, 0);
/* Request chip interrupt */
- if (request_irq(host->irq, kw_i2c_irq, SA_SHIRQ, "keywest i2c", host))
+ if (request_irq(host->irq, kw_i2c_irq, 0, "keywest i2c", host))
host->irq = NO_IRQ;
printk(KERN_INFO "KeyWest i2c @0x%08x irq %d %s\n",
@@ -1165,6 +1157,7 @@ EXPORT_SYMBOL_GPL(pmac_i2c_xfer);
/* some quirks for platform function decoding */
enum {
pmac_i2c_quirk_invmask = 0x00000001u,
+ pmac_i2c_quirk_skip = 0x00000002u,
};
static void pmac_i2c_devscan(void (*callback)(struct device_node *dev,
@@ -1180,6 +1173,15 @@ static void pmac_i2c_devscan(void (*callback)(struct device_node *dev,
/* XXX Study device-tree's & apple drivers are get the quirks
* right !
*/
+ /* Workaround: It seems that running the clockspreading
+ * properties on the eMac will cause lockups during boot.
+ * The machine seems to work fine without that. So for now,
+ * let's make sure i2c-hwclock doesn't match about "imic"
+ * clocks and we'll figure out if we really need to do
+ * something special about those later.
+ */
+ { "i2c-hwclock", "imic5002", pmac_i2c_quirk_skip },
+ { "i2c-hwclock", "imic5003", pmac_i2c_quirk_skip },
{ "i2c-hwclock", NULL, pmac_i2c_quirk_invmask },
{ "i2c-cpu-voltage", NULL, 0},
{ "temp-monitor", NULL, 0 },
@@ -1206,6 +1208,8 @@ static void pmac_i2c_devscan(void (*callback)(struct device_node *dev,
if (p->compatible &&
!device_is_compatible(np, p->compatible))
continue;
+ if (p->quirks & pmac_i2c_quirk_skip)
+ break;
callback(np, p->quirks);
break;
}
diff --git a/arch/powerpc/platforms/powermac/pci.c b/arch/powerpc/platforms/powermac/pci.c
index f5d8d15d74f..ea179afea63 100644
--- a/arch/powerpc/platforms/powermac/pci.c
+++ b/arch/powerpc/platforms/powermac/pci.c
@@ -1097,7 +1097,7 @@ pmac_pci_enable_device_hook(struct pci_dev *dev, int initial)
* (iBook second controller)
*/
if (dev->vendor == PCI_VENDOR_ID_APPLE
- && (dev->class == ((PCI_CLASS_SERIAL_USB << 8) | 0x10))
+ && dev->class == PCI_CLASS_SERIAL_USB_OHCI
&& !node) {
printk(KERN_INFO "Apple USB OHCI %s disabled by firmware\n",
pci_name(dev));
diff --git a/arch/powerpc/platforms/powermac/pfunc_core.c b/arch/powerpc/platforms/powermac/pfunc_core.c
index 4baa75b1d36..f08173b0f06 100644
--- a/arch/powerpc/platforms/powermac/pfunc_core.c
+++ b/arch/powerpc/platforms/powermac/pfunc_core.c
@@ -11,6 +11,7 @@
#include <linux/kernel.h>
#include <linux/spinlock.h>
#include <linux/module.h>
+#include <linux/mutex.h>
#include <asm/semaphore.h>
#include <asm/prom.h>
@@ -546,6 +547,7 @@ struct pmf_device {
static LIST_HEAD(pmf_devices);
static spinlock_t pmf_lock = SPIN_LOCK_UNLOCKED;
+static DEFINE_MUTEX(pmf_irq_mutex);
static void pmf_release_device(struct kref *kref)
{
@@ -864,15 +866,17 @@ int pmf_register_irq_client(struct device_node *target,
spin_lock_irqsave(&pmf_lock, flags);
func = __pmf_find_function(target, name, PMF_FLAGS_INT_GEN);
- if (func == NULL) {
- spin_unlock_irqrestore(&pmf_lock, flags);
+ if (func)
+ func = pmf_get_function(func);
+ spin_unlock_irqrestore(&pmf_lock, flags);
+ if (func == NULL)
return -ENODEV;
- }
+ mutex_lock(&pmf_irq_mutex);
if (list_empty(&func->irq_clients))
func->dev->handlers->irq_enable(func);
list_add(&client->link, &func->irq_clients);
client->func = func;
- spin_unlock_irqrestore(&pmf_lock, flags);
+ mutex_unlock(&pmf_irq_mutex);
return 0;
}
@@ -881,16 +885,16 @@ EXPORT_SYMBOL_GPL(pmf_register_irq_client);
void pmf_unregister_irq_client(struct pmf_irq_client *client)
{
struct pmf_function *func = client->func;
- unsigned long flags;
BUG_ON(func == NULL);
- spin_lock_irqsave(&pmf_lock, flags);
+ mutex_lock(&pmf_irq_mutex);
client->func = NULL;
list_del(&client->link);
if (list_empty(&func->irq_clients))
func->dev->handlers->irq_disable(func);
- spin_unlock_irqrestore(&pmf_lock, flags);
+ mutex_unlock(&pmf_irq_mutex);
+ pmf_put_function(func);
}
EXPORT_SYMBOL_GPL(pmf_unregister_irq_client);
diff --git a/arch/powerpc/platforms/powermac/setup.c b/arch/powerpc/platforms/powermac/setup.c
index 4d15e396655..b9200fb0781 100644
--- a/arch/powerpc/platforms/powermac/setup.c
+++ b/arch/powerpc/platforms/powermac/setup.c
@@ -463,11 +463,23 @@ static int pmac_pm_finish(suspend_state_t state)
return 0;
}
+static int pmac_pm_valid(suspend_state_t state)
+{
+ switch (state) {
+ case PM_SUSPEND_DISK:
+ return 1;
+ /* can't do any other states via generic mechanism yet */
+ default:
+ return 0;
+ }
+}
+
static struct pm_ops pmac_pm_ops = {
.pm_disk_mode = PM_DISK_SHUTDOWN,
.prepare = pmac_pm_prepare,
.enter = pmac_pm_enter,
.finish = pmac_pm_finish,
+ .valid = pmac_pm_valid,
};
#endif /* CONFIG_SOFTWARE_SUSPEND */
diff --git a/arch/powerpc/platforms/pseries/eeh.c b/arch/powerpc/platforms/pseries/eeh.c
index 780fb27a009..32eaddfa547 100644
--- a/arch/powerpc/platforms/pseries/eeh.c
+++ b/arch/powerpc/platforms/pseries/eeh.c
@@ -957,8 +957,10 @@ static void eeh_remove_device(struct pci_dev *dev)
pci_addr_cache_remove_device(dev);
dn = pci_device_to_OF_node(dev);
- PCI_DN(dn)->pcidev = NULL;
- pci_dev_put (dev);
+ if (PCI_DN(dn)->pcidev) {
+ PCI_DN(dn)->pcidev = NULL;
+ pci_dev_put (dev);
+ }
}
void eeh_remove_bus_device(struct pci_dev *dev)
diff --git a/arch/powerpc/platforms/pseries/eeh_event.c b/arch/powerpc/platforms/pseries/eeh_event.c
index a1bda6f96fd..40020c65c89 100644
--- a/arch/powerpc/platforms/pseries/eeh_event.c
+++ b/arch/powerpc/platforms/pseries/eeh_event.c
@@ -118,7 +118,15 @@ int eeh_send_failure_event (struct device_node *dn,
{
unsigned long flags;
struct eeh_event *event;
+ char *location;
+ if (!mem_init_done) {
+ printk(KERN_ERR "EEH: event during early boot not handled\n");
+ location = (char *) get_property(dn, "ibm,loc-code", NULL);
+ printk(KERN_ERR "EEH: device node = %s\n", dn->full_name);
+ printk(KERN_ERR "EEH: PCI location = %s\n", location);
+ return 1;
+ }
event = kmalloc(sizeof(*event), GFP_ATOMIC);
if (event == NULL) {
printk (KERN_ERR "EEH: out of memory, event not handled\n");
diff --git a/arch/powerpc/platforms/pseries/rtasd.c b/arch/powerpc/platforms/pseries/rtasd.c
index fcc4d561a23..e0000ce769e 100644
--- a/arch/powerpc/platforms/pseries/rtasd.c
+++ b/arch/powerpc/platforms/pseries/rtasd.c
@@ -488,7 +488,7 @@ static int __init rtas_init(void)
/* No RTAS */
if (rtas_token("event-scan") == RTAS_UNKNOWN_SERVICE) {
printk(KERN_INFO "rtasd: no event-scan on system\n");
- return 1;
+ return -ENODEV;
}
entry = create_proc_entry("ppc64/rtas/error_log", S_IRUSR, NULL);
diff --git a/arch/powerpc/platforms/pseries/setup.c b/arch/powerpc/platforms/pseries/setup.c
index 5eb55ef1c91..5f79f01c44f 100644
--- a/arch/powerpc/platforms/pseries/setup.c
+++ b/arch/powerpc/platforms/pseries/setup.c
@@ -255,7 +255,7 @@ static int __init pSeries_init_panel(void)
{
/* Manually leave the kernel version on the panel. */
ppc_md.progress("Linux ppc64\n", 0);
- ppc_md.progress(system_utsname.version, 0);
+ ppc_md.progress(system_utsname.release, 0);
return 0;
}
diff --git a/arch/powerpc/sysdev/dart_iommu.c b/arch/powerpc/sysdev/dart_iommu.c
index 61d31742861..38087bd6e3c 100644
--- a/arch/powerpc/sysdev/dart_iommu.c
+++ b/arch/powerpc/sysdev/dart_iommu.c
@@ -49,6 +49,7 @@
#include "dart.h"
+extern int iommu_is_off;
extern int iommu_force_on;
/* Physical base address and size of the DART table */
@@ -329,10 +330,17 @@ void iommu_init_early_dart(void)
void __init alloc_dart_table(void)
{
- /* Only reserve DART space if machine has more than 2GB of RAM
+ /* Only reserve DART space if machine has more than 1GB of RAM
* or if requested with iommu=on on cmdline.
+ *
+ * 1GB of RAM is picked as limit because some default devices
+ * (i.e. Airport Extreme) have 30 bit address range limits.
*/
- if (lmb_end_of_DRAM() <= 0x80000000ull && !iommu_force_on)
+
+ if (iommu_is_off)
+ return;
+
+ if (!iommu_force_on && lmb_end_of_DRAM() <= 0x40000000ull)
return;
/* 512 pages (2MB) is max DART tablesize. */