diff options
Diffstat (limited to 'arch/mips/momentum/ocelot_g')
| -rw-r--r-- | arch/mips/momentum/ocelot_g/Makefile | 8 | ||||
| -rw-r--r-- | arch/mips/momentum/ocelot_g/dbg_io.c | 126 | ||||
| -rw-r--r-- | arch/mips/momentum/ocelot_g/gt-irq.c | 214 | ||||
| -rw-r--r-- | arch/mips/momentum/ocelot_g/int-handler.S | 131 | ||||
| -rw-r--r-- | arch/mips/momentum/ocelot_g/irq.c | 69 | ||||
| -rw-r--r-- | arch/mips/momentum/ocelot_g/ocelot_pld.h | 30 | ||||
| -rw-r--r-- | arch/mips/momentum/ocelot_g/prom.c | 86 | ||||
| -rw-r--r-- | arch/mips/momentum/ocelot_g/reset.c | 47 | ||||
| -rw-r--r-- | arch/mips/momentum/ocelot_g/setup.c | 266 |
9 files changed, 977 insertions, 0 deletions
diff --git a/arch/mips/momentum/ocelot_g/Makefile b/arch/mips/momentum/ocelot_g/Makefile new file mode 100644 index 00000000000..e5f1cb08697 --- /dev/null +++ b/arch/mips/momentum/ocelot_g/Makefile @@ -0,0 +1,8 @@ +# +# Makefile for Momentum Computer's Ocelot-G board. +# + +obj-y += int-handler.o irq.o gt-irq.o prom.o reset.o setup.o +obj-$(CONFIG_KGDB) += dbg_io.o + +EXTRA_AFLAGS := $(CFLAGS) diff --git a/arch/mips/momentum/ocelot_g/dbg_io.c b/arch/mips/momentum/ocelot_g/dbg_io.c new file mode 100644 index 00000000000..8720bccfdea --- /dev/null +++ b/arch/mips/momentum/ocelot_g/dbg_io.c @@ -0,0 +1,126 @@ +#include <linux/config.h> + +#ifdef CONFIG_KGDB + +#include <asm/serial.h> /* For the serial port location and base baud */ + +/* --- CONFIG --- */ + +typedef unsigned char uint8; +typedef unsigned int uint32; + +/* --- END OF CONFIG --- */ + +#define UART16550_BAUD_2400 2400 +#define UART16550_BAUD_4800 4800 +#define UART16550_BAUD_9600 9600 +#define UART16550_BAUD_19200 19200 +#define UART16550_BAUD_38400 38400 +#define UART16550_BAUD_57600 57600 +#define UART16550_BAUD_115200 115200 + +#define UART16550_PARITY_NONE 0 +#define UART16550_PARITY_ODD 0x08 +#define UART16550_PARITY_EVEN 0x18 +#define UART16550_PARITY_MARK 0x28 +#define UART16550_PARITY_SPACE 0x38 + +#define UART16550_DATA_5BIT 0x0 +#define UART16550_DATA_6BIT 0x1 +#define UART16550_DATA_7BIT 0x2 +#define UART16550_DATA_8BIT 0x3 + +#define UART16550_STOP_1BIT 0x0 +#define UART16550_STOP_2BIT 0x4 + +/* ----------------------------------------------------- */ + +/* === CONFIG === */ + +/* [jsun] we use the second serial port for kdb */ +#define BASE OCELOT_SERIAL1_BASE +#define MAX_BAUD OCELOT_BASE_BAUD + +/* === END OF CONFIG === */ + +#define REG_OFFSET 4 + +/* register offset */ +#define OFS_RCV_BUFFER 0 +#define OFS_TRANS_HOLD 0 +#define OFS_SEND_BUFFER 0 +#define OFS_INTR_ENABLE (1*REG_OFFSET) +#define OFS_INTR_ID (2*REG_OFFSET) +#define OFS_DATA_FORMAT (3*REG_OFFSET) +#define OFS_LINE_CONTROL (3*REG_OFFSET) +#define OFS_MODEM_CONTROL (4*REG_OFFSET) +#define OFS_RS232_OUTPUT (4*REG_OFFSET) +#define OFS_LINE_STATUS (5*REG_OFFSET) +#define OFS_MODEM_STATUS (6*REG_OFFSET) +#define OFS_RS232_INPUT (6*REG_OFFSET) +#define OFS_SCRATCH_PAD (7*REG_OFFSET) + +#define OFS_DIVISOR_LSB (0*REG_OFFSET) +#define OFS_DIVISOR_MSB (1*REG_OFFSET) + + +/* memory-mapped read/write of the port */ +#define UART16550_READ(y) (*((volatile uint8*)(BASE + y))) +#define UART16550_WRITE(y, z) ((*((volatile uint8*)(BASE + y))) = z) + +void debugInit(uint32 baud, uint8 data, uint8 parity, uint8 stop) +{ + /* disable interrupts */ + UART16550_WRITE(OFS_INTR_ENABLE, 0); + + /* set up buad rate */ + { + uint32 divisor; + + /* set DIAB bit */ + UART16550_WRITE(OFS_LINE_CONTROL, 0x80); + + /* set divisor */ + divisor = MAX_BAUD / baud; + UART16550_WRITE(OFS_DIVISOR_LSB, divisor & 0xff); + UART16550_WRITE(OFS_DIVISOR_MSB, (divisor & 0xff00) >> 8); + + /* clear DIAB bit */ + UART16550_WRITE(OFS_LINE_CONTROL, 0x0); + } + + /* set data format */ + UART16550_WRITE(OFS_DATA_FORMAT, data | parity | stop); +} + +static int remoteDebugInitialized = 0; + +uint8 getDebugChar(void) +{ + if (!remoteDebugInitialized) { + remoteDebugInitialized = 1; + debugInit(UART16550_BAUD_38400, + UART16550_DATA_8BIT, + UART16550_PARITY_NONE, UART16550_STOP_1BIT); + } + + while ((UART16550_READ(OFS_LINE_STATUS) & 0x1) == 0); + return UART16550_READ(OFS_RCV_BUFFER); +} + + +int putDebugChar(uint8 byte) +{ + if (!remoteDebugInitialized) { + remoteDebugInitialized = 1; + debugInit(UART16550_BAUD_38400, + UART16550_DATA_8BIT, + UART16550_PARITY_NONE, UART16550_STOP_1BIT); + } + + while ((UART16550_READ(OFS_LINE_STATUS) & 0x20) == 0); + UART16550_WRITE(OFS_SEND_BUFFER, byte); + return 1; +} + +#endif diff --git a/arch/mips/momentum/ocelot_g/gt-irq.c b/arch/mips/momentum/ocelot_g/gt-irq.c new file mode 100644 index 00000000000..d0b5c9dd0ea --- /dev/null +++ b/arch/mips/momentum/ocelot_g/gt-irq.c @@ -0,0 +1,214 @@ +/* + * + * Copyright 2002 Momentum Computer + * Author: mdharm@momenco.com + * + * arch/mips/momentum/ocelot_g/gt_irq.c + * Interrupt routines for gt64240. Currently it only handles timer irq. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + */ +#include <linux/config.h> +#include <linux/module.h> +#include <linux/interrupt.h> +#include <linux/kernel.h> +#include <asm/ptrace.h> +#include <linux/sched.h> +#include <linux/kernel_stat.h> +#include <asm/gt64240.h> +#include <asm/io.h> + +unsigned long bus_clock; + +/* + * These are interrupt handlers for the GT on-chip interrupts. They + * all come in to the MIPS on a single interrupt line, and have to + * be handled and ack'ed differently than other MIPS interrupts. + */ + +#if CURRENTLY_UNUSED + +struct tq_struct irq_handlers[MAX_CAUSE_REGS][MAX_CAUSE_REG_WIDTH]; +void hook_irq_handler(int int_cause, int bit_num, void *isr_ptr); + +/* + * Hooks IRQ handler to the system. When the system is interrupted + * the interrupt service routine is called. + * + * Inputs : + * int_cause - The interrupt cause number. In EVB64120 two parameters + * are declared, INT_CAUSE_MAIN and INT_CAUSE_HIGH. + * bit_num - Indicates which bit number in the cause register + * isr_ptr - Pointer to the interrupt service routine + */ +void hook_irq_handler(int int_cause, int bit_num, void *isr_ptr) +{ + irq_handlers[int_cause][bit_num].routine = isr_ptr; +} + + +/* + * Enables the IRQ on Galileo Chip + * + * Inputs : + * int_cause - The interrupt cause number. In EVB64120 two parameters + * are declared, INT_CAUSE_MAIN and INT_CAUSE_HIGH. + * bit_num - Indicates which bit number in the cause register + * + * Outputs : + * 1 if succesful, 0 if failure + */ +int enable_galileo_irq(int int_cause, int bit_num) +{ + if (int_cause == INT_CAUSE_MAIN) + SET_REG_BITS(CPU_INTERRUPT_MASK_REGISTER, (1 << bit_num)); + else if (int_cause == INT_CAUSE_HIGH) + SET_REG_BITS(CPU_HIGH_INTERRUPT_MASK_REGISTER, + (1 << bit_num)); + else + return 0; + + return 1; +} + +/* + * Disables the IRQ on Galileo Chip + * + * Inputs : + * int_cause - The interrupt cause number. In EVB64120 two parameters + * are declared, INT_CAUSE_MAIN and INT_CAUSE_HIGH. + * bit_num - Indicates which bit number in the cause register + * + * Outputs : + * 1 if succesful, 0 if failure + */ +int disable_galileo_irq(int int_cause, int bit_num) +{ + if (int_cause == INT_CAUSE_MAIN) + RESET_REG_BITS(CPU_INTERRUPT_MASK_REGISTER, + (1 << bit_num)); + else if (int_cause == INT_CAUSE_HIGH) + RESET_REG_BITS(CPU_HIGH_INTERRUPT_MASK_REGISTER, + (1 << bit_num)); + else + return 0; + return 1; +} +#endif /* UNUSED */ + +/* + * Interrupt handler for interrupts coming from the Galileo chip via P0_INT#. + * + * We route the timer interrupt to P0_INT# (IRQ 6), and that's all this + * routine can handle, for now. + * + * In the future, we'll route more interrupts to this pin, and that's why + * we keep this particular structure in the function. + */ + +static irqreturn_t gt64240_p0int_irq(int irq, void *dev, struct pt_regs *regs) +{ + uint32_t irq_src, irq_src_mask; + int handled; + + /* get the low interrupt cause register */ + irq_src = MV_READ(LOW_INTERRUPT_CAUSE_REGISTER); + + /* get the mask register for this pin */ + irq_src_mask = MV_READ(PCI_0INTERRUPT_CAUSE_MASK_REGISTER_LOW); + + /* mask off only the interrupts we're interested in */ + irq_src = irq_src & irq_src_mask; + + handled = IRQ_NONE; + + /* Check for timer interrupt */ + if (irq_src & 0x00000100) { + handled = IRQ_HANDLED; + irq_src &= ~0x00000100; + + /* Clear any pending cause bits */ + MV_WRITE(TIMER_COUNTER_0_3_INTERRUPT_CAUSE, 0x0); + + /* handle the timer call */ + do_timer(regs); +#ifndef CONFIG_SMP + update_process_times(user_mode(regs)); +#endif + } + + if (irq_src) { + printk(KERN_INFO + "UNKNOWN P0_INT# interrupt received, irq_src=0x%x\n", + irq_src); + } + + return handled; +} + +/* + * Initializes timer using galileo's built in timer. + */ + +/* + * This will ignore the standard MIPS timer interrupt handler + * that is passed in as *irq (=irq0 in ../kernel/time.c). + * We will do our own timer interrupt handling. + */ +void gt64240_time_init(void) +{ + static struct irqaction timer; + + /* Stop the timer -- we'll use timer #0 */ + MV_WRITE(TIMER_COUNTER_0_3_CONTROL, 0x0); + + /* Load timer value for 100 Hz */ + MV_WRITE(TIMER_COUNTER0, bus_clock / 100); + + /* + * Create the IRQ structure entry for the timer. Since we're too early + * in the boot process to use the "request_irq()" call, we'll hard-code + * the values to the correct interrupt line. + */ + timer.handler = >64240_p0int_irq; + timer.flags = SA_SHIRQ | SA_INTERRUPT; + timer.name = "timer"; + timer.dev_id = NULL; + timer.next = NULL; + timer.mask = 0; + irq_desc[6].action = &timer; + + enable_irq(6); + + /* Clear any pending cause bits */ + MV_WRITE(TIMER_COUNTER_0_3_INTERRUPT_CAUSE, 0x0); + + /* Enable the interrupt for timer 0 */ + MV_WRITE(TIMER_COUNTER_0_3_INTERRUPT_MASK, 0x1); + + /* Enable the timer interrupt for GT-64240 pin P0_INT# */ + MV_WRITE (PCI_0INTERRUPT_CAUSE_MASK_REGISTER_LOW, 0x100); + + /* Configure and start the timer */ + MV_WRITE(TIMER_COUNTER_0_3_CONTROL, 0x3); +} + +void gt64240_irq_init(void) +{ +#if CURRENTLY_UNUSED + int i, j; + + /* Reset irq handlers pointers to NULL */ + for (i = 0; i < MAX_CAUSE_REGS; i++) { + for (j = 0; j < MAX_CAUSE_REG_WIDTH; j++) { + irq_handlers[i][j].next = NULL; + irq_handlers[i][j].sync = 0; + irq_handlers[i][j].routine = NULL; + irq_handlers[i][j].data = NULL; + } + } +#endif +} diff --git a/arch/mips/momentum/ocelot_g/int-handler.S b/arch/mips/momentum/ocelot_g/int-handler.S new file mode 100644 index 00000000000..772e8f71317 --- /dev/null +++ b/arch/mips/momentum/ocelot_g/int-handler.S @@ -0,0 +1,131 @@ +/* + * Copyright 2001 MontaVista Software Inc. + * Author: jsun@mvista.com or jsun@junsun.net + * + * First-level interrupt dispatcher for ocelot board. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + */ +#include <asm/asm.h> +#include <asm/mipsregs.h> +#include <asm/addrspace.h> +#include <asm/regdef.h> +#include <asm/stackframe.h> + +/* + * first level interrupt dispatcher for ocelot board - + * We check for the timer first, then check PCI ints A and D. + * Then check for serial IRQ and fall through. + */ + .align 5 + NESTED(ocelot_handle_int, PT_SIZE, sp) + SAVE_ALL + CLI + .set at + mfc0 t0, CP0_CAUSE + mfc0 t2, CP0_STATUS + + and t0, t2 + + andi t1, t0, STATUSF_IP2 /* int0 hardware line */ + bnez t1, ll_pri_enet_irq + andi t1, t0, STATUSF_IP3 /* int1 hardware line */ + bnez t1, ll_sec_enet_irq + andi t1, t0, STATUSF_IP4 /* int2 hardware line */ + bnez t1, ll_uart_irq + andi t1, t0, STATUSF_IP5 /* int3 hardware line */ + bnez t1, ll_cpci_irq + andi t1, t0, STATUSF_IP6 /* int4 hardware line */ + bnez t1, ll_galileo_p0_irq + andi t1, t0, STATUSF_IP7 /* cpu timer */ + bnez t1, ll_cputimer_irq + + /* now look at the extended interrupts */ + mfc0 t0, CP0_CAUSE + cfc0 t1, CP0_S1_INTCONTROL + + /* shift the mask 8 bits left to line up the bits */ + sll t2, t1, 8 + + and t0, t2 + srl t0, t0, 16 + + andi t1, t0, STATUSF_IP8 /* int6 hardware line */ + bnez t1, ll_galileo_p1_irq + andi t1, t0, STATUSF_IP9 /* int7 hardware line */ + bnez t1, ll_pmc_irq + andi t1, t0, STATUSF_IP10 /* int8 hardware line */ + bnez t1, ll_cpci_abcd_irq + andi t1, t0, STATUSF_IP11 /* int9 hardware line */ + bnez t1, ll_testpoint_irq + + .set reorder + + /* wrong alarm or masked ... */ + j spurious_interrupt + nop + END(ocelot_handle_int) + + .align 5 +ll_pri_enet_irq: + li a0, 2 + move a1, sp + jal do_IRQ + j ret_from_irq + +ll_sec_enet_irq: + li a0, 3 + move a1, sp + jal do_IRQ + j ret_from_irq + +ll_uart_irq: + li a0, 4 + move a1, sp + jal do_IRQ + j ret_from_irq + +ll_cpci_irq: + li a0, 5 + move a1, sp + jal do_IRQ + j ret_from_irq + +ll_galileo_p0_irq: + li a0, 6 + move a1, sp + jal do_IRQ + j ret_from_irq + +ll_cputimer_irq: + li a0, 7 + move a1, sp + jal do_IRQ + j ret_from_irq + +ll_galileo_p1_irq: + li a0, 8 + move a1, sp + jal do_IRQ + j ret_from_irq + +ll_pmc_irq: + li a0, 9 + move a1, sp + jal do_IRQ + j ret_from_irq + +ll_cpci_abcd_irq: + li a0, 10 + move a1, sp + jal do_IRQ + j ret_from_irq + +ll_testpoint_irq: + li a0, 11 + move a1, sp + jal do_IRQ + j ret_from_irq diff --git a/arch/mips/momentum/ocelot_g/irq.c b/arch/mips/momentum/ocelot_g/irq.c new file mode 100644 index 00000000000..5eb85b16420 --- /dev/null +++ b/arch/mips/momentum/ocelot_g/irq.c @@ -0,0 +1,69 @@ +/* + * Copyright (C) 2000 RidgeRun, Inc. + * Author: RidgeRun, Inc. + * glonnon@ridgerun.com, skranz@ridgerun.com, stevej@ridgerun.com + * + * Copyright 2001 MontaVista Software Inc. + * Author: Jun Sun, jsun@mvista.com or jsun@junsun.net + * Copyright (C) 2000, 01, 05 Ralf Baechle (ralf@linux-mips.org) + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + * + * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED + * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF + * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN + * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, + * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT + * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF + * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON + * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF + * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + * + * You should have received a copy of the GNU General Public License along + * with this program; if not, write to the Free Software Foundation, Inc., + * 675 Mass Ave, Cambridge, MA 02139, USA. + * + */ +#include <linux/errno.h> +#include <linux/init.h> +#include <linux/kernel_stat.h> +#include <linux/module.h> +#include <linux/signal.h> +#include <linux/sched.h> +#include <linux/types.h> +#include <linux/interrupt.h> +#include <linux/ioport.h> +#include <linux/timex.h> +#include <linux/slab.h> +#include <linux/random.h> +#include <linux/bitops.h> +#include <asm/bootinfo.h> +#include <asm/io.h> +#include <asm/irq.h> +#include <asm/irq_cpu.h> +#include <asm/mipsregs.h> +#include <asm/system.h> + +extern asmlinkage void ocelot_handle_int(void); +extern void gt64240_irq_init(void); + +void __init arch_init_irq(void) +{ + /* + * Clear all of the interrupts while we change the able around a bit. + * int-handler is not on bootstrap + */ + clear_c0_status(ST0_IM); + local_irq_disable(); + + /* Sets the first-level interrupt dispatcher. */ + set_except_vector(0, ocelot_handle_int); + mips_cpu_irq_init(0); + rm7k_cpu_irq_init(8); + + gt64240_irq_init(); +} diff --git a/arch/mips/momentum/ocelot_g/ocelot_pld.h b/arch/mips/momentum/ocelot_g/ocelot_pld.h new file mode 100644 index 00000000000..fcb8275e219 --- /dev/null +++ b/arch/mips/momentum/ocelot_g/ocelot_pld.h @@ -0,0 +1,30 @@ +/* + * Ocelot Board Register Definitions + * + * (C) 2001 Red Hat, Inc. + * + * GPL'd + */ +#ifndef __MOMENCO_OCELOT_PLD_H__ +#define __MOMENCO_OCELOT_PLD_H__ + +#define OCELOT_CS0_ADDR (0xfc000000) + +#define OCELOT_REG_BOARDREV (0) +#define OCELOT_REG_PLD1_ID (1) +#define OCELOT_REG_PLD2_ID (2) +#define OCELOT_REG_RESET_STATUS (3) +#define OCELOT_REG_BOARD_STATUS (4) +#define OCELOT_REG_CPCI_ID (5) +#define OCELOT_REG_I2C_CTRL (8) +#define OCELOT_REG_EEPROM_MODE (9) +#define OCELOT_REG_INTMASK (10) +#define OCELOT_REG_INTSTATUS (11) +#define OCELOT_REG_INTSET (12) +#define OCELOT_REG_INTCLR (13) + +#define OCELOT_PLD_WRITE(x, y) writeb(x, OCELOT_CS0_ADDR + OCELOT_REG_##y) +#define OCELOT_PLD_READ(x) readb(OCELOT_CS0_ADDR + OCELOT_REG_##x) + + +#endif /* __MOMENCO_OCELOT_PLD_H__ */ diff --git a/arch/mips/momentum/ocelot_g/prom.c b/arch/mips/momentum/ocelot_g/prom.c new file mode 100644 index 00000000000..6b4f577c275 --- /dev/null +++ b/arch/mips/momentum/ocelot_g/prom.c @@ -0,0 +1,86 @@ +/* + * Copyright 2002 Momentum Computer Inc. + * Author: Matthew Dharm <mdharm@momenco.com> + * + * Based on Ocelot Linux port, which is + * Copyright 2001 MontaVista Software Inc. + * Author: jsun@mvista.com or jsun@junsun.net + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + */ +#include <linux/config.h> +#include <linux/init.h> +#include <linux/mm.h> +#include <linux/sched.h> +#include <linux/bootmem.h> + +#include <asm/addrspace.h> +#include <asm/bootinfo.h> +#include <asm/pmon.h> +#include <asm/gt64240.h> + +#include "ocelot_pld.h" + +struct callvectors* debug_vectors; + +extern unsigned long marvell_base; +extern unsigned long bus_clock; + +#ifdef CONFIG_GALILLEO_GT64240_ETH +extern unsigned char prom_mac_addr_base[6]; +#endif + +const char *get_system_type(void) +{ + return "Momentum Ocelot"; +} + +void __init prom_init(void) +{ + int argc = fw_arg0; + char **arg = (char **) fw_arg1; + char **env = (char **) fw_arg2; + struct callvectors *cv = (struct callvectors *) fw_arg3; + int i; + + /* save the PROM vectors for debugging use */ + debug_vectors = cv; + + /* arg[0] is "g", the rest is boot parameters */ + arcs_cmdline[0] = '\0'; + for (i = 1; i < argc; i++) { + if (strlen(arcs_cmdline) + strlen(arg[i] + 1) + >= sizeof(arcs_cmdline)) + break; + strcat(arcs_cmdline, arg[i]); + strcat(arcs_cmdline, " "); + } + + mips_machgroup = MACH_GROUP_MOMENCO; + mips_machtype = MACH_MOMENCO_OCELOT_G; + +#ifdef CONFIG_GALILLEO_GT64240_ETH + /* get the base MAC address for on-board ethernet ports */ + memcpy(prom_mac_addr_base, (void*)0xfc807cf2, 6); +#endif + + while (*env) { + if (strncmp("gtbase", *env, strlen("gtbase")) == 0) { + marvell_base = simple_strtol(*env + strlen("gtbase="), + NULL, 16); + } + if (strncmp("busclock", *env, strlen("busclock")) == 0) { + bus_clock = simple_strtol(*env + strlen("busclock="), + NULL, 10); + } + env++; + } +} + +unsigned long __init prom_free_prom_memory(void) +{ + return 0; +} diff --git a/arch/mips/momentum/ocelot_g/reset.c b/arch/mips/momentum/ocelot_g/reset.c new file mode 100644 index 00000000000..3fd499adf4c --- /dev/null +++ b/arch/mips/momentum/ocelot_g/reset.c @@ -0,0 +1,47 @@ +/* + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + * + * Copyright (C) 1997, 2001 Ralf Baechle + * Copyright 2001 MontaVista Software Inc. + * Author: jsun@mvista.com or jsun@junsun.net + */ +#include <linux/sched.h> +#include <linux/mm.h> +#include <asm/io.h> +#include <asm/pgtable.h> +#include <asm/processor.h> +#include <asm/reboot.h> +#include <asm/system.h> +#include <linux/delay.h> + +void momenco_ocelot_restart(char *command) +{ + void *nvram = ioremap_nocache(0x2c807000, 0x1000); + + if (!nvram) { + printk(KERN_NOTICE "ioremap of reset register failed\n"); + return; + } + writeb(0x84, nvram + 0xff7); /* Ask the NVRAM/RTC/watchdog chip to + assert reset in 1/16 second */ + mdelay(10+(1000/16)); + iounmap(nvram); + printk(KERN_NOTICE "Watchdog reset failed\n"); +} + +void momenco_ocelot_halt(void) +{ + printk(KERN_NOTICE "\n** You can safely turn off the power\n"); + while (1) + __asm__(".set\tmips3\n\t" + "wait\n\t" + ".set\tmips0"); +} + +void momenco_ocelot_power_off(void) +{ + momenco_ocelot_halt(); +} diff --git a/arch/mips/momentum/ocelot_g/setup.c b/arch/mips/momentum/ocelot_g/setup.c new file mode 100644 index 00000000000..38a78ab8c83 --- /dev/null +++ b/arch/mips/momentum/ocelot_g/setup.c @@ -0,0 +1,266 @@ +/* + * BRIEF MODULE DESCRIPTION + * Momentum Computer Ocelot-G (CP7000G) - board dependent boot routines + * + * Copyright (C) 1996, 1997, 2001 Ralf Baechle + * Copyright (C) 2000 RidgeRun, Inc. + * Copyright (C) 2001 Red Hat, Inc. + * Copyright (C) 2002 Momentum Computer + * + * Author: Matthew Dharm, Momentum Computer + * mdharm@momenco.com + * + * Author: RidgeRun, Inc. + * glonnon@ridgerun.com, skranz@ridgerun.com, stevej@ridgerun.com + * + * Copyright 2001 MontaVista Software Inc. + * Author: jsun@mvista.com or jsun@junsun.net + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + * + * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED + * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF + * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN + * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, + * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT + * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF + * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON + * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF + * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + * + * You should have received a copy of the GNU General Public License along + * with this program; if not, write to the Free Software Foundation, Inc., + * 675 Mass Ave, Cambridge, MA 02139, USA. + * + */ +#include <linux/config.h> +#include <linux/init.h> +#include <linux/kernel.h> +#include <linux/types.h> +#include <linux/mm.h> +#include <linux/swap.h> +#include <linux/ioport.h> +#include <linux/sched.h> +#include <linux/interrupt.h> +#include <linux/pci.h> +#include <linux/timex.h> +#include <linux/vmalloc.h> +#include <asm/time.h> +#include <asm/bootinfo.h> +#include <asm/page.h> +#include <asm/io.h> +#include <asm/gt64240.h> +#include <asm/irq.h> +#include <asm/pci.h> +#include <asm/processor.h> +#include <asm/ptrace.h> +#include <asm/reboot.h> +#include <linux/bootmem.h> + +#include "ocelot_pld.h" + +#ifdef CONFIG_GALILLEO_GT64240_ETH +extern unsigned char prom_mac_addr_base[6]; +#endif + +unsigned long marvell_base; + +/* These functions are used for rebooting or halting the machine*/ +extern void momenco_ocelot_restart(char *command); +extern void momenco_ocelot_halt(void); +extern void momenco_ocelot_power_off(void); + +extern void gt64240_time_init(void); +extern void momenco_ocelot_irq_setup(void); + +static char reset_reason; + +static unsigned long ENTRYLO(unsigned long paddr) +{ + return ((paddr & PAGE_MASK) | + (_PAGE_PRESENT | __READABLE | __WRITEABLE | _PAGE_GLOBAL | + _CACHE_UNCACHED)) >> 6; +} + +/* setup code for a handoff from a version 2 PMON 2000 PROM */ +void PMON_v2_setup(void) +{ + /* A wired TLB entry for the GT64240 and the serial port. The + GT64240 is going to be hit on every IRQ anyway - there's + absolutely no point in letting it be a random TLB entry, as + it'll just cause needless churning of the TLB. And we use + the other half for the serial port, which is just a PITA + otherwise :) + + Device Physical Virtual + GT64240 Internal Regs 0xf4000000 0xe0000000 + UARTs (CS2) 0xfd000000 0xe0001000 + */ + add_wired_entry(ENTRYLO(0xf4000000), ENTRYLO(0xf4010000), + 0xf4000000, PM_64K); + add_wired_entry(ENTRYLO(0xfd000000), ENTRYLO(0xfd001000), + 0xfd000000, PM_4K); + + /* Also a temporary entry to let us talk to the Ocelot PLD and NVRAM + in the CS[012] region. We can't use ioremap() yet. The NVRAM + is a ST M48T37Y, which includes NVRAM, RTC, and Watchdog functions. + + Ocelot PLD (CS0) 0xfc000000 0xe0020000 + NVRAM (CS1) 0xfc800000 0xe0030000 + */ + add_temporary_entry(ENTRYLO(0xfc000000), ENTRYLO(0xfc010000), + 0xfc000000, PM_64K); + add_temporary_entry(ENTRYLO(0xfc800000), ENTRYLO(0xfc810000), + 0xfc800000, PM_64K); + + marvell_base = 0xf4000000; +} + +extern int rm7k_tcache_enabled; + +/* + * This runs in KSEG1. See the verbiage in rm7k.c::probe_scache() + */ +#define Page_Invalidate_T 0x16 +static void __init setup_l3cache(unsigned long size) +{ + int register i; + + printk("Enabling L3 cache..."); + + /* Enable the L3 cache in the GT64120A's CPU Configuration register */ + MV_WRITE(0, MV_READ(0) | (1<<14)); + + /* Enable the L3 cache in the CPU */ + set_c0_config(1<<12 /* CONF_TE */); + + /* Clear the cache */ + write_c0_taglo(0); + write_c0_taghi(0); + + for (i=0; i < size; i+= 4096) { + __asm__ __volatile__ ( + ".set noreorder\n\t" + ".set mips3\n\t" + "cache %1, (%0)\n\t" + ".set mips0\n\t" + ".set reorder" + : + : "r" (KSEG0ADDR(i)), + "i" (Page_Invalidate_T)); + } + + /* Let the RM7000 MM code know that the tertiary cache is enabled */ + rm7k_tcache_enabled = 1; + + printk("Done\n"); +} + +static int __init momenco_ocelot_g_setup(void) +{ + void (*l3func)(unsigned long) = (void *) KSEG1ADDR(setup_l3cache); + unsigned int tmpword; + + board_time_init = gt64240_time_init; + + _machine_restart = momenco_ocelot_restart; + _machine_halt = momenco_ocelot_halt; + _machine_power_off = momenco_ocelot_power_off; + + /* + * initrd_start = (ulong)ocelot_initrd_start; + * initrd_end = (ulong)ocelot_initrd_start + (ulong)ocelot_initrd_size; + * initrd_below_start_ok = 1; + */ + + /* do handoff reconfiguration */ + PMON_v2_setup(); + +#ifdef CONFIG_GALILLEO_GT64240_ETH + /* get the mac addr */ + memcpy(prom_mac_addr_base, (void*)0xfc807cf2, 6); +#endif + + /* Turn off the Bit-Error LED */ + OCELOT_PLD_WRITE(0x80, INTCLR); + + tmpword = OCELOT_PLD_READ(BOARDREV); + if (tmpword < 26) + printk("Momenco Ocelot-G: Board Assembly Rev. %c\n", 'A'+tmpword); + else + printk("Momenco Ocelot-G: Board Assembly Revision #0x%x\n", tmpword); + + tmpword = OCELOT_PLD_READ(PLD1_ID); + printk("PLD 1 ID: %d.%d\n", tmpword>>4, tmpword&15); + tmpword = OCELOT_PLD_READ(PLD2_ID); + printk("PLD 2 ID: %d.%d\n", tmpword>>4, tmpword&15); + tmpword = OCELOT_PLD_READ(RESET_STATUS); + printk("Reset reason: 0x%x\n", tmpword); + reset_reason = tmpword; + OCELOT_PLD_WRITE(0xff, RESET_STATUS); + + tmpword = OCELOT_PLD_READ(BOARD_STATUS); + printk("Board Status register: 0x%02x\n", tmpword); + printk(" - User jumper: %s\n", (tmpword & 0x80)?"installed":"absent"); + printk(" - Boot flash write jumper: %s\n", (tmpword&0x40)?"installed":"absent"); + printk(" - Tulip PHY %s connected\n", (tmpword&0x10)?"is":"not"); + printk(" - L3 Cache size: %d MiB\n", (1<<((tmpword&12) >> 2))&~1); + printk(" - SDRAM size: %d MiB\n", 1<<(6+(tmpword&3))); + + if (tmpword&12) + l3func((1<<(((tmpword&12) >> 2)+20))); + + switch(tmpword &3) { + case 3: + /* 512MiB -- two banks of 256MiB */ + add_memory_region( 0x0<<20, 0x100<<20, BOOT_MEM_RAM); +/* + add_memory_region(0x100<<20, 0x100<<20, BOOT_MEM_RAM); +*/ + break; + case 2: + /* 256MiB -- two banks of 128MiB */ + add_memory_region( 0x0<<20, 0x80<<20, BOOT_MEM_RAM); + add_memory_region(0x80<<20, 0x80<<20, BOOT_MEM_RAM); + break; + case 1: + /* 128MiB -- 64MiB per bank */ + add_memory_region( 0x0<<20, 0x40<<20, BOOT_MEM_RAM); + add_memory_region(0x40<<20, 0x40<<20, BOOT_MEM_RAM); + break; + case 0: + /* 64MiB */ + add_memory_region( 0x0<<20, 0x40<<20, BOOT_MEM_RAM); + break; + } + + /* FIXME: Fix up the DiskOnChip mapping */ + MV_WRITE(0x468, 0xfef73); + + return 0; +} + +early_initcall(momenco_ocelot_g_setup); + +/* This needs to be one of the first initcalls, because no I/O port access + can work before this */ + +static int io_base_ioremap(void) +{ + /* we're mapping PCI accesses from 0xc0000000 to 0xf0000000 */ + unsigned long io_remap_range; + + io_remap_range = (unsigned long) ioremap(0xc0000000, 0x30000000); + if (!io_remap_range) + panic("Could not ioremap I/O port range"); + + set_io_port_base(io_remap_range - 0xc0000000); + + return 0; +} + +module_init(io_base_ioremap); |